1252 files changed, 63149 insertions, 36576 deletions

diff --git a/CREDITS b/CREDITS
index 5e0736722af..e8b7d36611e 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3738,7 +3738,7 @@ S: 93149 Nittenau
 S: Germany
 
 N: Gertjan van Wingerde
-E: gwingerde@home.nl
+E: gwingerde@gmail.com
 D: Ralink rt2x00 WLAN driver
 D: Minix V2 file-system
 D: Misc fixes
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 6e253407b3d..accfe2f5247 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -298,3 +298,15 @@ over a rather long period of time, but improvements are always welcome!
 
 	Note that, rcu_assign_pointer() and rcu_dereference() relate to
 	SRCU just as they do to other forms of RCU.
+
+15.	The whole point of call_rcu(), synchronize_rcu(), and friends
+	is to wait until all pre-existing readers have finished before
+	carrying out some otherwise-destructive operation.  It is
+	therefore critically important to -first- remove any path
+	that readers can follow that could be affected by the
+	destructive operation, and -only- -then- invoke call_rcu(),
+	synchronize_rcu(), or friends.
+
+	Because these primitives only wait for pre-existing readers,
+	it is the caller's responsibility to guarantee safety to
+	any subsequent readers.
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index dc6045577a8..43cb1004d35 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -29,7 +29,14 @@ ffff0000	ffff0fff	CPU vector page.
 				CPU supports vector relocation (control
 				register V bit.)
 
-ffc00000	fffeffff	DMA memory mapping region.  Memory returned
+fffe0000	fffeffff	XScale cache flush area.  This is used
+				in proc-xscale.S to flush the whole data
+				cache.  Free for other usage on non-XScale.
+
+fff00000	fffdffff	Fixmap mapping region.  Addresses provided
+				by fix_to_virt() will be located here.
+
+ffc00000	ffefffff	DMA memory mapping region.  Memory returned
 				by the dma_alloc_xxx functions will be
 				dynamically mapped here.
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5ddbe350487..20d3b94703a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -335,3 +335,12 @@ Why:	In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
 	Secmark, it is time to deprecate the older mechanism and start the
 	process of removing the old code.
 Who:	Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:	sysfs ui for changing p4-clockmod parameters
+When:	September 2009
+Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+	e088e4c9cdb618675874becb91b2fd581ee707e6.
+	Removal is subject to fixing any remaining bugs in ACPI which may
+	cause the thermal throttling not to happen at the right time.
+Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index 4333e836c49..e055acb6b2d 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -373,10 +373,11 @@ Filesystem Resizing	http://ext2resize.sourceforge.net/
 Compression (*)		http://e2compr.sourceforge.net/
 
 Implementations for:
-Windows 95/98/NT/2000	http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
-Windows 95 (*)		http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95/98/NT/2000	http://www.chrysocome.net/explore2fs
+Windows 95 (*)		http://www.yipton.net/content.html#FSDEXT2
 DOS client (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2			http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
-RISC OS client		ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+OS/2 (+)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+RISC OS client		http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
 
 (*) no longer actively developed/supported (as of Apr 2001)
+(+) no longer actively developed/supported (as of Mar 2009)
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 9dd2a3bb2ac..e5f3833a6ef 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -198,5 +198,5 @@ kernel source:	<file:fs/ext3/>
 programs: 	http://e2fsprogs.sourceforge.net/
 		http://ext2resize.sourceforge.net
 
-useful links:	http://www-106.ibm.com/developerworks/linux/library/l-fs7/
-		http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+useful links:	http://www.ibm.com/developerworks/library/l-fs7.html
+		http://www.ibm.com/developerworks/library/l-fs8.html
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a87be42f821..830bad7cce0 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1478,6 +1478,13 @@ of problems on the network like duplicate address or bad checksums. Normally,
 this should be enabled, but if the problem persists the messages can be
 disabled.
 
+netdev_budget
+-------------
+
+Maximum number of packets taken from all interfaces in one polling cycle (NAPI
+poll). In one polling cycle interfaces which are registered to polling are
+probed in a round-robin manner. The limit of packets in one such probe can be
+set per-device via sysfs class/net/<device>/weight .
 
 netdev_max_backlog
 ------------------
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 3e79e4a7a39..b324c033035 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs:
 
 				Squashfs		Cramfs
 
-Max filesystem size:		2^64			16 MiB
+Max filesystem size:		2^64			256 MiB
 Max file size:			~ 2 TiB			16 MiB
 Max files:			unlimited		unlimited
 Max directories:		unlimited		unlimited
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 0e841171023..93d8e3d5515 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -42,6 +42,11 @@ Supported chips:
     Addresses scanned: I2C 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+  * Maxim MAX6648
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
   * Maxim MAX6649
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4c
@@ -74,6 +79,11 @@ Supported chips:
                            0x4c, 0x4d and 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+  * Maxim MAX6692
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
 
 
 Author: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 54f21a5c262..ef9827f7c84 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -830,6 +830,12 @@ and is between 256 and 4096 characters. It is defined in the file
 	hvc_iucv=	[S390] Number of z/VM IUCV hypervisor console (HVC)
 			       terminal devices. Valid values: 0..8
 
+	i2c_bus=	[HW] Override the default board specific I2C bus speed
+			     or register an additional I2C bus that is not
+			     registered from board initialization code.
+			     Format:
+			     <bus_id>,<clkrate>
+
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
 	i8042.dumbkbd	[HW] Pretend that controller can only read data from
diff --git a/Documentation/logo.gif b/Documentation/logo.gif
deleted file mode 100644
index 2eae75fecfb..00000000000
--- a/Documentation/logo.gif
+++ /dev/null
diff --git a/Documentation/logo.svg b/Documentation/logo.svg
new file mode 100644
index 00000000000..cb9e4851d8c
--- /dev/null
+++ b/Documentation/logo.svg
@@ -0,0 +1,2911 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:xlink="http://www.w3.org/1999/xlink"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="1771.6534"
+   height="1417.3228"
+   id="svg2"
+   sodipodi:version="0.32"
+   inkscape:version="0.46"
+   sodipodi:docname="tuz.svg"
+   inkscape:output_extension="org.inkscape.output.svg.inkscape"
+   version="1.0"
+   style="display:inline;enable-background:new"
+   inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
+   inkscape:export-xdpi="100.03588"
+   inkscape:export-ydpi="100.03588">
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     gridtolerance="10000"
+     guidetolerance="10"
+     objecttolerance="10"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="0.25"
+     inkscape:cx="-174.7931"
+     inkscape:cy="784.26325"
+     inkscape:document-units="px"
+     inkscape:current-layer="svg2"
+     showgrid="false"
+     inkscape:window-width="1280"
+     inkscape:window-height="823"
+     inkscape:window-x="-4"
+     inkscape:window-y="25"
+     showguides="true"
+     inkscape:guide-bbox="true"
+     units="mm" />
+  <defs
+     id="defs4">
+    <filter
+       inkscape:collect="always"
+       x="-0.084654994"
+       width="1.16931"
+       y="-0.36592469"
+       height="1.7318494"
+       id="filter11361">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="4.5740586"
+         id="feGaussianBlur11363" />
+    </filter>
+    <inkscape:perspective
+       sodipodi:type="inkscape:persp3d"
+       inkscape:vp_x="0 : 564.0976 : 1"
+       inkscape:vp_y="0 : 1000 : 0"
+       inkscape:vp_z="1445.8591 : 564.0976 : 1"
+       inkscape:persp3d-origin="722.92957 : 376.06506 : 1"
+       id="perspective8145" />
+    <linearGradient
+       id="linearGradient7622">
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="0"
+         id="stop7624" />
+      <stop
+         style="stop-color:#ffffff;stop-opacity:0;"
+         offset="1"
+         id="stop7626" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4113">
+      <stop
+         style="stop-color:#000000;stop-opacity:0;"
+         offset="0"
+         id="stop4115" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop4117" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient3660">
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="0"
+         id="stop3662" />
+      <stop
+         style="stop-color:#ffffff;stop-opacity:0;"
+         offset="1"
+         id="stop3664" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3627">
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="0"
+         id="stop3629" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop3631" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient2843">
+      <stop
+         id="stop2845"
+         offset="0"
+         style="stop-color:#000000;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="0.02188784"
+         id="stop2847" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="0.75866222"
+         id="stop2849" />
+      <stop
+         id="stop2851"
+         offset="0.88508981"
+         style="stop-color:#232323;stop-opacity:1;" />
+      <stop
+         id="stop2853"
+         offset="1"
+         style="stop-color:#595959;stop-opacity:1;" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient8964">
+      <stop
+         style="stop-color:#1a1a1a;stop-opacity:1;"
+         offset="0"
+         id="stop8966" />
+      <stop
+         style="stop-color:#1a1a1a;stop-opacity:0;"
+         offset="1"
+         id="stop8968" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient8952">
+      <stop
+         style="stop-color:#0a0c0c;stop-opacity:1;"
+         offset="0"
+         id="stop8954" />
+      <stop
+         style="stop-color:#1f2727;stop-opacity:0;"
+         offset="1"
+         id="stop8956" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient8430">
+      <stop
+         style="stop-color:#1e2323;stop-opacity:1;"
+         offset="0"
+         id="stop8432" />
+      <stop
+         id="stop8438"
+         offset="0.55992389"
+         style="stop-color:#181d1d;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop8434" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient8398">
+      <stop
+         style="stop-color:#283131;stop-opacity:0;"
+         offset="0"
+         id="stop8400" />
+      <stop
+         id="stop8402"
+         offset="0.5125587"
+         style="stop-color:#1e2424;stop-opacity:0;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop8404" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient4870">
+      <stop
+         style="stop-color:#c7bd80;stop-opacity:1;"
+         offset="0"
+         id="stop4872" />
+      <stop
+         style="stop-color:#c7bd80;stop-opacity:0;"
+         offset="1"
+         id="stop4874" />
+    </linearGradient>
+    <linearGradient
+       inkscape:collect="always"
+       id="linearGradient4862">
+      <stop
+         style="stop-color:#e2e2e2;stop-opacity:1;"
+         offset="0"
+         id="stop4864" />
+      <stop
+         style="stop-color:#e2e2e2;stop-opacity:0;"
+         offset="1"
+         id="stop4866" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4478">
+      <stop
+         style="stop-color:#f9eed3;stop-opacity:1;"
+         offset="0"
+         id="stop4480" />
+      <stop
+         style="stop-color:#000000;stop-opacity:0;"
+         offset="1"
+         id="stop4482" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4106">
+      <stop
+         style="stop-color:#d9e002;stop-opacity:1;"
+         offset="0"
+         id="stop4108" />
+      <stop
+         id="stop4114"
+         offset="0.5"
+         style="stop-color:#a9ae01;stop-opacity:1;" />
+      <stop
+         style="stop-color:#717501;stop-opacity:1;"
+         offset="1"
+         id="stop4110" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4084">
+      <stop
+         style="stop-color:#7d7d00;stop-opacity:1;"
+         offset="0"
+         id="stop4086" />
+      <stop
+         id="stop4088"
+         offset="0.3636601"
+         style="stop-color:#c6c700;stop-opacity:1;" />
+      <stop
+         style="stop-color:#f6f800;stop-opacity:1;"
+         offset="1"
+         id="stop4090" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4041">
+      <stop
+         id="stop4043"
+         offset="0"
+         style="stop-color:#ffff00;stop-opacity:1;" />
+      <stop
+         id="stop4045"
+         offset="1"
+         style="stop-color:#ffff00;stop-opacity:0;" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4025">
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="0"
+         id="stop4027" />
+      <stop
+         style="stop-color:#ffffff;stop-opacity:0;"
+         offset="1"
+         id="stop4031" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient4013">
+      <stop
+         style="stop-color:#ffff00;stop-opacity:1;"
+         offset="0"
+         id="stop4015" />
+      <stop
+         style="stop-color:#b2b200;stop-opacity:1;"
+         offset="1"
+         id="stop4017" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3985">
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="0"
+         id="stop3987" />
+      <stop
+         style="stop-color:#1d1d1d;stop-opacity:1;"
+         offset="1"
+         id="stop3989" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3961">
+      <stop
+         style="stop-color:#283131;stop-opacity:0;"
+         offset="0"
+         id="stop3963" />
+      <stop
+         id="stop3965"
+         offset="0.5"
+         style="stop-color:#1e2424;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop3967" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3951">
+      <stop
+         id="stop3953"
+         offset="0"
+         style="stop-color:#344040;stop-opacity:1;" />
+      <stop
+         style="stop-color:#222929;stop-opacity:1;"
+         offset="0.5"
+         id="stop3955" />
+      <stop
+         id="stop3957"
+         offset="1"
+         style="stop-color:#000000;stop-opacity:1;" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3909">
+      <stop
+         style="stop-color:#283131;stop-opacity:1;"
+         offset="0"
+         id="stop3911" />
+      <stop
+         id="stop3917"
+         offset="0.5"
+         style="stop-color:#1e2424;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="1"
+         id="stop3913" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3537">
+      <stop
+         style="stop-color:#ada469;stop-opacity:1;"
+         offset="0"
+         id="stop3539" />
+      <stop
+         id="stop3545"
+         offset="0.81132078"
+         style="stop-color:#ada469;stop-opacity:1;" />
+      <stop
+         style="stop-color:#ffffff;stop-opacity:1;"
+         offset="1"
+         id="stop3541" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3317">
+      <stop
+         style="stop-color:#cfc690;stop-opacity:1"
+         offset="0"
+         id="stop3319" />
+      <stop
+         id="stop3321"
+         offset="0.21161865"
+         style="stop-color:#afa775;stop-opacity:1;" />
+      <stop
+         id="stop3323"
+         offset="0.53408515"
+         style="stop-color:#615c3a;stop-opacity:1;" />
+      <stop
+         style="stop-color:#000000;stop-opacity:1;"
+         offset="0.76504093"
+         id="stop3325" />
+      <stop
+         id="stop3327"
+         offset="1"
+         style="stop-color:#403518;stop-opacity:1;" />
+    </linearGradient>
+    <linearGradient
+       id="linearGradient3239">
+      <stop
+         id="stop3251"
+         offset="0"
+         style="stop-color:#cfc690;stop-opacity:1;" />
+      <stop
+         style="stop-color:#afa775;stop-opacity:1;"
+         offset="0.21161865"
+         id="stop3267" />
+      <stop
+         style="stop-color:#615c3a;stop-opacity:1;"
+         offset="0.53408515"
+         id="stop3261" />
+      <stop
+         id="stop3265"
+         offset="0.76504093"
+         style="stop-color:#000000;stop-opacity:1;" />
+      <stop
+         style="stop-color:#403518;stop-opacity:1;"
+         offset="1"
+         id="stop3243" />
+    </linearGradient>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3239"
+       id="radialGradient3281"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)"
+       spreadMethod="pad"
+       cx="806.52582"
+       cy="212.68117"
+       fx="806.52582"
+       fy="212.68117"
+       r="48.363216" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3317"
+       id="radialGradient3315"
+       cx="543.6698"
+       cy="147.3131"
+       fx="543.6698"
+       fy="147.3131"
+       r="47.863216"
+       gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3537"
+       id="radialGradient3543"
+       cx="385"
+       cy="237.00504"
+       fx="385"
+       fy="237.00504"
+       r="86.928574"
+       gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3909"
+       id="radialGradient3915"
+       cx="418.30365"
+       cy="342.47794"
+       fx="418.30365"
+       fy="342.47794"
+       r="131.4509"
+       gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3951"
+       id="radialGradient3933"
+       cx="397.16388"
+       cy="336.95245"
+       fx="397.16388"
+       fy="336.95245"
+       r="36.75"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3961"
+       id="linearGradient3959"
+       x1="398.21429"
+       y1="343.52289"
+       x2="379.28571"
+       y2="265.30862"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(450.03125,73.843964)" />
+    <filter
+       inkscape:collect="always"
+       id="filter3981"
+       x="-0.30000001"
+       width="1.6"
+       y="-0.30000001"
+       height="1.6">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="2"
+         id="feGaussianBlur3983" />
+    </filter>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3985"
+       id="radialGradient3991"
+       cx="402.48898"
+       cy="317.23578"
+       fx="402.48898"
+       fy="317.23578"
+       r="23.714285"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3999">
+      <path
+         style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline"
+         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z"
+         id="path4001"
+         sodipodi:nodetypes="czzczzzzc" />
+    </clipPath>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4013"
+       id="radialGradient4056"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
+       cx="228.81355"
+       cy="440.26971"
+       fx="228.81355"
+       fy="440.26971"
+       r="119.17509" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4041"
+       id="radialGradient4060"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
+       cx="275.4422"
+       cy="335.34866"
+       fx="275.4422"
+       fy="335.34866"
+       r="36.75" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4025"
+       id="radialGradient4062"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
+       cx="275.4422"
+       cy="335.34866"
+       fx="275.4422"
+       fy="335.34866"
+       r="36.75" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4084"
+       id="linearGradient4082"
+       gradientUnits="userSpaceOnUse"
+       x1="182.35046"
+       y1="256.11136"
+       x2="145.53348"
+       y2="542.20502" />
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath4100">
+      <path
+         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z"
+         id="path4102"
+         sodipodi:nodetypes="ccccccc" />
+    </clipPath>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4106"
+       id="radialGradient4112"
+       cx="250.22678"
+       cy="475.09763"
+       fx="250.22678"
+       fy="475.09763"
+       r="95.98877"
+       gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4484"
+       x1="412.08926"
+       y1="404.91574"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4486"
+       x1="411.91071"
+       y1="404.91577"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4488"
+       x1="411.91071"
+       y1="405.54077"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4490"
+       x1="412.08926"
+       y1="405.54077"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4478"
+       id="linearGradient4492"
+       x1="411.73212"
+       y1="405.54077"
+       x2="417.375"
+       y2="401.82648"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4862"
+       id="radialGradient4868"
+       cx="429.56738"
+       cy="377.42877"
+       fx="429.56738"
+       fy="377.42877"
+       r="72.079735"
+       gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4870"
+       id="radialGradient4876"
+       cx="437.6991"
+       cy="391.21735"
+       fx="437.6991"
+       fy="391.21735"
+       r="36.611931"
+       gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
+       gradientUnits="userSpaceOnUse" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4013"
+       id="radialGradient3585"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
+       cx="228.81355"
+       cy="440.26971"
+       fx="228.81355"
+       fy="440.26971"
+       r="119.17509" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4084"
+       id="linearGradient3587"
+       gradientUnits="userSpaceOnUse"
+       x1="182.35046"
+       y1="256.11136"
+       x2="145.53348"
+       y2="542.20502" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3317"
+       id="radialGradient8410"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)"
+       cx="317.78754"
+       cy="129.65378"
+       fx="317.78754"
+       fy="129.65378"
+       r="47.863216" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8398"
+       id="radialGradient8412"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)"
+       cx="325.30847"
+       cy="80.909554"
+       fx="325.30847"
+       fy="80.909554"
+       r="26.937988" />
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8514">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8516"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8604">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8606"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8610">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8612"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8616">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8618"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8622">
+      <path
+         style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583"
+         id="path8624"
+         sodipodi:nodetypes="czzzzzzczczczczzzc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8642">
+      <path
+         style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
+         id="path8644"
+         sodipodi:nodetypes="czzcczcc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8658">
+      <path
+         style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
+         id="path8660"
+         sodipodi:nodetypes="czzzcczzcc" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8802"
+       x="-0.35311759"
+       width="1.7062352"
+       y="-0.1817714"
+       height="1.3635428">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="48.038491"
+         id="feGaussianBlur8804" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8806"
+       x="-0.61142862"
+       width="2.2228572"
+       y="-0.14930232"
+       height="1.2986046">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="37.830213"
+         id="feGaussianBlur8808" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8810"
+       x="-0.23519406"
+       width="1.4703881"
+       y="-0.24500646"
+       height="1.4900129">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="58.328041"
+         id="feGaussianBlur8812" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8814"
+       x="-0.20466694"
+       width="1.4093339"
+       y="-0.29007819"
+       height="1.5801564">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="22.300169"
+         id="feGaussianBlur8816" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8818"
+       x="-0.34381232"
+       width="1.6876246"
+       y="-0.18433961"
+       height="1.3686792">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="34.542167"
+         id="feGaussianBlur8820" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8822"
+       x="-0.2742857"
+       width="1.5485713"
+       y="-0.21333334"
+       height="1.4266667">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="11.313708"
+         id="feGaussianBlur8824" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8826"
+       x="-0.25894088"
+       width="1.5178818"
+       y="-0.2236412"
+       height="1.4472824">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="19.631544"
+         id="feGaussianBlur8828" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8856"
+       x="-0.3253231"
+       width="1.6506462"
+       y="-0.19013336"
+       height="1.3802667">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="28.712591"
+         id="feGaussianBlur8858" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8860"
+       x="-0.38093024"
+       width="1.7618605"
+       y="-0.17518716"
+       height="1.3503743">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="19.304015"
+         id="feGaussianBlur8862" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8888"
+       x="-0.2112188"
+       width="1.4224375"
+       y="-0.16808605"
+       height="1.3361721">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="8.3693583"
+         id="feGaussianBlur8890" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8892"
+       x="-0.18692794"
+       width="1.3738559"
+       y="-0.23646873"
+       height="1.4729375">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="31.21228"
+         id="feGaussianBlur8894" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8906">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+         id="path8908"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8940"
+       x="-0.25152978"
+       width="1.5030596"
+       y="-0.053035267"
+       height="1.1060705">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="13.024603"
+         id="feGaussianBlur8942" />
+    </filter>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8952"
+       id="linearGradient8958"
+       x1="609.31244"
+       y1="239.46866"
+       x2="560.83142"
+       y2="262.86206"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(450.03125,73.843964)" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8964"
+       id="linearGradient8970"
+       x1="603.84064"
+       y1="627.85303"
+       x2="616.24396"
+       y2="585.42664"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(450.03125,73.843964)" />
+    <filter
+       inkscape:collect="always"
+       id="filter9020"
+       x="-0.32861114"
+       width="1.6572223"
+       y="-0.182"
+       height="1.364">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="20.912684"
+         id="feGaussianBlur9022" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter9024"
+       x="-0.55453134"
+       width="2.1090627"
+       y="-0.51434779"
+       height="2.0286956">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="20.912684"
+         id="feGaussianBlur9026" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter9044"
+       x="-0.32631579"
+       width="1.6526316"
+       y="-0.84545463"
+       height="2.6909094">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="21.92031"
+         id="feGaussianBlur9046" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter9048"
+       x="-0.40879121"
+       width="1.8175824"
+       y="-0.71538466"
+       height="2.4307692">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="21.92031"
+         id="feGaussianBlur9050" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter3587"
+       x="-0.1">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="8.881432"
+         id="feGaussianBlur3589" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3602">
+      <path
+         sodipodi:nodetypes="czzzzzzczczczczzzc"
+         id="path3604"
+         d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187"
+         style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter4120"
+       x="-0.2770822"
+       width="1.5541644"
+       y="-0.32482043"
+       height="1.6496409">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="19.956289"
+         id="feGaussianBlur4122" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3631">
+      <path
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+         id="path3633"
+         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3665">
+      <path
+         sodipodi:nodetypes="czzcczcc"
+         id="path3667"
+         d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
+         style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3677">
+      <path
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
+         id="path3679"
+         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter3898">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="10.892985"
+         id="feGaussianBlur3900" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4130"
+       x="-0.49509686"
+       width="1.9901937"
+       y="-0.26708817"
+       height="1.5341763">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="10.730622"
+         id="feGaussianBlur4132" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4141"
+       x="-0.40611032"
+       width="1.8122206"
+       y="-0.30260596"
+       height="1.6052119">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="9.8586086"
+         id="feGaussianBlur4143" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath4177">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path4179"
+         d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter4185">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="3.6164709"
+         id="feGaussianBlur4187" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4105">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="3.8640966"
+         id="feGaussianBlur4107" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath2833">
+      <path
+         style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
+         id="path2835"
+         sodipodi:nodetypes="czzzcczzcc" />
+    </clipPath>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient2843"
+       id="linearGradient2841"
+       gradientUnits="userSpaceOnUse"
+       x1="347.89655"
+       y1="1070.2124"
+       x2="275.58191"
+       y2="867.97992" />
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3627"
+       id="linearGradient3688"
+       gradientUnits="userSpaceOnUse"
+       x1="699.32867"
+       y1="269.76755"
+       x2="698.97504"
+       y2="346.1351" />
+    <mask
+       maskUnits="userSpaceOnUse"
+       id="mask3684">
+      <path
+         sodipodi:type="arc"
+         style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         id="path3686"
+         sodipodi:cx="579.474"
+         sodipodi:cy="260.57516"
+         sodipodi:rx="192.6866"
+         sodipodi:ry="164.04877"
+         d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z"
+         transform="translate(-174.03125,62.156036)" />
+    </mask>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3622">
+      <path
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z"
+         id="path3624"
+         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3636">
+      <path
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+         id="path3638"
+         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    </clipPath>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3660"
+       id="linearGradient3666"
+       x1="1255.7386"
+       y1="667.09216"
+       x2="893.69995"
+       y2="858.01099"
+       gradientUnits="userSpaceOnUse" />
+    <filter
+       inkscape:collect="always"
+       id="filter3779"
+       x="-0.087980822"
+       width="1.1759616"
+       y="-0.17728332"
+       height="1.3545666">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="16.340344"
+         id="feGaussianBlur3781" />
+    </filter>
+    <filter
+       id="filter3785"
+       inkscape:label="White Fur">
+      <feTurbulence
+         id="feTurbulence3787"
+         in="SourceAlpha"
+         type="fractalNoise"
+         baseFrequency="0.24044943820224721"
+         numOctaves="10"
+         seed="655"
+         result="result0" />
+      <feDisplacementMap
+         id="feDisplacementMap3789"
+         in="SourceGraphic"
+         in2="result0"
+         scale="62"
+         xChannelSelector="B"
+         yChannelSelector="G" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter3677">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="2.0397518"
+         id="feGaussianBlur3679" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3722">
+      <path
+         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+         id="path3724"
+         sodipodi:nodetypes="czzzzzzzzcc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3986">
+      <path
+         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+         id="path3988"
+         sodipodi:nodetypes="czzzzzzzzcc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3992">
+      <path
+         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+         id="path3994"
+         sodipodi:nodetypes="czzzzzzzzcc" />
+    </clipPath>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath3998">
+      <path
+         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z"
+         id="path4000"
+         sodipodi:nodetypes="cscccccccccccc" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter4002"
+       x="-0.24334238"
+       width="1.4866848"
+       y="-0.39104807"
+       height="1.7820961">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="14.589518"
+         id="feGaussianBlur4004" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4010"
+       x="-0.14577261"
+       width="1.2915452"
+       y="-0.23523259"
+       height="1.4704652">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="4.4442907"
+         id="feGaussianBlur4012" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4053">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.6062947"
+         id="feGaussianBlur4055" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4079">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="6.5887624"
+         id="feGaussianBlur4081" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter4083">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.5052066"
+         id="feGaussianBlur4085" />
+    </filter>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient4113"
+       id="radialGradient4119"
+       cx="296.33783"
+       cy="427.17749"
+       fx="296.33783"
+       fy="427.17749"
+       r="19.704132"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
+    <filter
+       inkscape:collect="always"
+       id="filter6949"
+       x="-0.10294895"
+       width="1.2058979"
+       y="-0.34224695"
+       height="1.6844939">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6951" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6953"
+       x="-0.098320946"
+       width="1.1966419"
+       y="-0.19750816"
+       height="1.3950163">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6955" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6957"
+       x="-0.098213427"
+       width="1.1964267"
+       y="-0.19838208"
+       height="1.3967642">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6959" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6961"
+       x="-0.09919104"
+       width="1.1983821"
+       y="-0.22643611"
+       height="1.4528722">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6963" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6965"
+       x="-0.099081434"
+       width="1.1981629"
+       y="-0.22529824"
+       height="1.4505965">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6967" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6969"
+       x="-0.10450897"
+       width="1.2090179"
+       y="-0.40468886"
+       height="1.8093777">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6971" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6973"
+       x="-0.10330495"
+       width="1.2066098"
+       y="-0.36439717"
+       height="1.7287945">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6975" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6977"
+       x="-0.10224481"
+       width="1.2044896"
+       y="-0.32371372"
+       height="1.6474274">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6979" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6981"
+       x="-0.10052545"
+       width="1.2010509"
+       y="-0.2742162"
+       height="1.5484324">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6983" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6985"
+       x="-0.098428868"
+       width="1.1968577"
+       y="-0.20853186"
+       height="1.4170637">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6987" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6989"
+       x="-0.098428868"
+       width="1.1968577"
+       y="-0.20287035"
+       height="1.4057407">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6991" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6993"
+       x="-0.098213255"
+       width="1.1964265"
+       y="-0.19838208"
+       height="1.3967642">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6995" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter6997">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur6999" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7001">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.1675612"
+         id="feGaussianBlur7003" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7285"
+       x="-0.030884685"
+       width="1.0617694"
+       y="-0.10267408"
+       height="1.2053483">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7287" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7289">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7291" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7293">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7295" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7297">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7299" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7301">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7303" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7305">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7307" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7309">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7311" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7313">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7315" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7317">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7319" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7321">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7323" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7325"
+       x="-0.031352691"
+       width="1.0627054"
+       y="-0.12140666"
+       height="1.2428133">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7327" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7329"
+       x="-0.030991485"
+       width="1.061983"
+       y="-0.10931916"
+       height="1.2186383">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7331" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7333">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7335" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7337">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.35026836"
+         id="feGaussianBlur7339" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7345">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.7233839"
+         id="feGaussianBlur7347" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath7421">
+      <path
+         sodipodi:type="inkscape:offset"
+         inkscape:radius="0"
+         inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
+         style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         id="path7423"
+         d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
+         transform="translate(8.0045714e-2,-3.125e-2)" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter7578"
+       x="-0.08160872"
+       width="1.1632174"
+       y="-0.22659944"
+       height="1.4531989">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="2.437399"
+         id="feGaussianBlur7580" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter7594"
+       x="-0.040804356"
+       width="1.0816087"
+       y="-0.11329972"
+       height="1.2265995">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="1.2186995"
+         id="feGaussianBlur7596" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath7606">
+      <path
+         id="path7608"
+         d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
+         style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter7610"
+       x="-0.021942979"
+       width="1.0438859"
+       y="-0.10017137"
+       height="1.2003427">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="0.57530213"
+         id="feGaussianBlur7612" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath7616">
+      <path
+         id="path7618"
+         d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z"
+         style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <linearGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient7622"
+       id="linearGradient7708"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="translate(-19.091883,4.2426407)"
+       x1="774.97668"
+       y1="-211.87105"
+       x2="755.11584"
+       y2="-202.67865" />
+    <mask
+       maskUnits="userSpaceOnUse"
+       id="mask7704">
+      <path
+         style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z"
+         id="path7706" />
+    </mask>
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8430"
+       id="radialGradient7904"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
+       cx="142.95833"
+       cy="107.09234"
+       fx="142.95833"
+       fy="107.09234"
+       r="66.981766" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient3317"
+       id="radialGradient7906"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
+       cx="317.78754"
+       cy="129.65378"
+       fx="317.78754"
+       fy="129.65378"
+       r="47.863216" />
+    <radialGradient
+       inkscape:collect="always"
+       xlink:href="#linearGradient8398"
+       id="radialGradient7908"
+       gradientUnits="userSpaceOnUse"
+       gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
+       cx="325.30847"
+       cy="80.909554"
+       fx="325.30847"
+       fy="80.909554"
+       r="26.937988" />
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8209">
+      <path
+         sodipodi:nodetypes="czcc"
+         id="path8211"
+         d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211"
+         style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8225">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="10.661912"
+         id="feGaussianBlur8227" />
+    </filter>
+    <filter
+       inkscape:collect="always"
+       id="filter8333">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="7.18"
+         id="feGaussianBlur8335" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8338">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path8340"
+         d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8354">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="6.82"
+         id="feGaussianBlur8356" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8359">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path8361"
+         d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8379"
+       x="-0.14413793"
+       width="1.288276"
+       y="-0.10278689"
+       height="1.2055738">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="7.389266"
+         id="feGaussianBlur8381" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8392">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path8394"
+         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+    <filter
+       inkscape:collect="always"
+       id="filter8404"
+       x="-0.090268657"
+       width="1.1805373"
+       y="-0.10250848"
+       height="1.205017">
+      <feGaussianBlur
+         inkscape:collect="always"
+         stdDeviation="5.3457272"
+         id="feGaussianBlur8406" />
+    </filter>
+    <clipPath
+       clipPathUnits="userSpaceOnUse"
+       id="clipPath8417">
+      <path
+         sodipodi:nodetypes="czzzzzzcccccccccczczz"
+         id="path8419"
+         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </clipPath>
+  </defs>
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:groupmode="layer"
+     id="layer1"
+     inkscape:label="Shadow">
+    <path
+       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new"
+       d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z"
+       id="path10326"
+       sodipodi:nodetypes="cccccccccsccccccccccc"
+       transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
+       inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
+       inkscape:export-xdpi="142.10527"
+       inkscape:export-ydpi="142.10527" />
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer20"
+     inkscape:label="New Ear">
+    <g
+       style="opacity:1;display:inline;enable-background:new"
+       id="g7882"
+       transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
+      <path
+         sodipodi:nodetypes="czzzzcc"
+         id="path7876"
+         d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z"
+         style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <path
+         sodipodi:nodetypes="czzzzzc"
+         id="path7878"
+         d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z"
+         style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <path
+         sodipodi:nodetypes="czccssc"
+         id="path7880"
+         d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z"
+         style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+    </g>
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer21"
+     inkscape:label="Rendered2"
+     style="display:inline">
+    <path
+       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z"
+       id="path7917"
+       sodipodi:nodetypes="czzzcczzcc" />
+    <path
+       style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate"
+       d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z"
+       id="path7919"
+       clip-path="url(#clipPath8658)"
+       sodipodi:nodetypes="ccccc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate"
+       d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z"
+       id="path7923"
+       clip-path="url(#clipPath2833)"
+       sodipodi:nodetypes="cccccc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z"
+       id="path7921"
+       sodipodi:nodetypes="czzcczcc" />
+    <path
+       style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate"
+       d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z"
+       id="path7925"
+       sodipodi:nodetypes="ccccccc"
+       clip-path="url(#clipPath3665)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633"
+       id="path7927"
+       sodipodi:nodetypes="czzzzcc" />
+    <path
+       style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate"
+       d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z"
+       id="path7929"
+       clip-path="url(#clipPath8642)"
+       sodipodi:nodetypes="ccccc"
+       transform="translate(276,136)" />
+    <g
+       style="opacity:1;display:inline;enable-background:new"
+       id="g7931"
+       transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
+       inkscape:transform-center-x="-347.89063"
+       inkscape:transform-center-y="-28.255779">
+      <path
+         style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
+         id="path7933" />
+      <g
+         clip-path="url(#clipPath7616)"
+         style="display:inline;filter:url(#filter7610);enable-background:new"
+         id="g7935"
+         transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)">
+        <path
+           sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
+           id="path7937"
+           d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+        <path
+           id="path7939"
+           d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+           sodipodi:nodetypes="cssccsscc" />
+        <path
+           id="path7941"
+           d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+           sodipodi:nodetypes="csccscc" />
+      </g>
+      <g
+         clip-path="url(#clipPath7606)"
+         id="g7943">
+        <path
+           style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new"
+           d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z"
+           id="path7945"
+           sodipodi:nodetypes="czzzzzzzzzzzzzz" />
+        <path
+           style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new"
+           d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z"
+           id="path7947"
+           sodipodi:nodetypes="czzzzzzzzzzzzzz" />
+      </g>
+    </g>
+    <path
+       style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z"
+       id="path7949"
+       sodipodi:nodetypes="cscccccccccccc" />
+    <path
+       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate"
+       d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z"
+       id="path7951"
+       sodipodi:nodetypes="ccccczzzcc"
+       clip-path="url(#clipPath8616)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211"
+       id="path7953"
+       sodipodi:nodetypes="czcc" />
+    <path
+       style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate"
+       d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z"
+       id="path7955"
+       sodipodi:nodetypes="cccc"
+       clip-path="url(#clipPath8209)"
+       transform="translate(276,136)" />
+    <g
+       transform="translate(450.03125,73.843964)"
+       style="opacity:1;display:inline;enable-background:new"
+       id="g7957"
+       clip-path="url(#clipPath3998)">
+      <g
+         transform="translate(-174.03125,62.156036)"
+         style="filter:url(#filter3677)"
+         id="g7959">
+        <g
+           id="g7961"
+           style="filter:url(#filter3785)">
+          <path
+             sodipodi:nodetypes="czzzzzzzzzz"
+             id="path7963"
+             d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <rect
+             y="412.60312"
+             x="343.6539"
+             height="181.01935"
+             width="381.83765"
+             id="rect7965"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+        <g
+           id="g7967"
+           style="filter:url(#filter3785)">
+          <path
+             sodipodi:nodetypes="czzzcc"
+             id="path7969"
+             d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+             transform="translate(174.03125,-62.156036)" />
+          <rect
+             y="344.82138"
+             x="702.86414"
+             height="162.63455"
+             width="207.8894"
+             id="rect7971"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+      </g>
+      <g
+         transform="translate(-174.03125,62.156036)"
+         style="opacity:0.18000004;display:inline;enable-background:new"
+         id="g7973">
+        <g
+           id="g7975"
+           style="filter:url(#filter3785)">
+          <path
+             sodipodi:nodetypes="czzzzzzzzzz"
+             id="path7977"
+             d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <rect
+             y="412.60312"
+             x="343.6539"
+             height="181.01935"
+             width="381.83765"
+             id="rect7979"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+        <g
+           id="g7981"
+           style="filter:url(#filter3785)">
+          <path
+             sodipodi:nodetypes="czzzcc"
+             id="path7983"
+             d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+             transform="translate(174.03125,-62.156036)" />
+          <rect
+             y="344.82138"
+             x="702.86414"
+             height="162.63455"
+             width="207.8894"
+             id="rect7985"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+      </g>
+    </g>
+    <path
+       style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate"
+       d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z"
+       id="path7987"
+       clip-path="url(#clipPath8604)"
+       sodipodi:nodetypes="cccccscc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043"
+       id="path7989"
+       sodipodi:nodetypes="czzzzzzc" />
+    <path
+       style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z"
+       id="path7991"
+       sodipodi:nodetypes="czzzzc" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate"
+       id="path7993"
+       sodipodi:cx="385"
+       sodipodi:cy="237.00504"
+       sodipodi:rx="86.428574"
+       sodipodi:ry="73.928574"
+       d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z"
+       transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
+       clip-path="url(#clipPath4100)" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z"
+       id="path7995"
+       sodipodi:nodetypes="csczzc"
+       mask="url(#mask3684)" />
+    <path
+       style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328"
+       id="path7997"
+       sodipodi:nodetypes="czcc" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       id="path7999"
+       sodipodi:cx="409.28571"
+       sodipodi:cy="306.64789"
+       sodipodi:rx="36.25"
+       sodipodi:ry="36.25"
+       d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z"
+       transform="translate(449.49554,74.915393)" />
+    <path
+       style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate"
+       d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z"
+       id="path8001"
+       sodipodi:nodetypes="cccccccccc"
+       clip-path="url(#clipPath8616)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate"
+       d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z"
+       id="path8003"
+       sodipodi:nodetypes="czzcc" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       id="path8005"
+       sodipodi:cx="410"
+       sodipodi:cy="306.64789"
+       sodipodi:rx="23.214285"
+       sodipodi:ry="23.214285"
+       d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z"
+       transform="translate(449.67411,74.915393)" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate"
+       id="path8007"
+       sodipodi:cx="414.28571"
+       sodipodi:cy="303.07648"
+       sodipodi:rx="7.5"
+       sodipodi:ry="7.5"
+       d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z"
+       transform="translate(451.99554,73.486821)" />
+    <path
+       style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z"
+       id="path8009"
+       sodipodi:nodetypes="czzzczc" />
+    <g
+       style="opacity:1;display:inline;enable-background:new"
+       id="g8011"
+       transform="translate(780.74553,74.55825)">
+      <path
+         transform="translate(-329.81481,0)"
+         clip-path="url(#clipPath3999)"
+         sodipodi:nodetypes="czzczzzszc"
+         id="path8013"
+         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
+         style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" />
+      <path
+         transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
+         d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
+         sodipodi:ry="134.00607"
+         sodipodi:rx="64.715881"
+         sodipodi:cy="338.07648"
+         sodipodi:cx="183.57143"
+         id="path8015"
+         style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
+         d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
+         sodipodi:ry="134.00607"
+         sodipodi:rx="64.715881"
+         sodipodi:cy="338.07648"
+         sodipodi:cx="183.57143"
+         id="path8017"
+         style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(-329.81481,3e-7)"
+         clip-path="url(#clipPath3999)"
+         sodipodi:nodetypes="czzczzzszc"
+         id="path8019"
+         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" />
+    </g>
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       id="path8021"
+       sodipodi:cx="310.71429"
+       sodipodi:cy="398.07648"
+       sodipodi:rx="19.704132"
+       sodipodi:ry="19.704132"
+       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+       transform="translate(452.55663,72.581273)" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate"
+       id="path8023"
+       sodipodi:cx="310.71429"
+       sodipodi:cy="398.07648"
+       sodipodi:rx="19.704132"
+       sodipodi:ry="19.704132"
+       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+       transform="translate(450.55663,72.581273)" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       id="path8025"
+       sodipodi:cx="310.71429"
+       sodipodi:cy="398.07648"
+       sodipodi:rx="19.704132"
+       sodipodi:ry="19.704132"
+       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+       transform="translate(450.55663,72.581273)" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate"
+       id="path8027"
+       sodipodi:cx="429.56738"
+       sodipodi:cy="377.42877"
+       sodipodi:rx="72.079735"
+       sodipodi:ry="44.547726"
+       d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z"
+       transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)"
+       inkscape:transform-center-x="-47.231976"
+       inkscape:transform-center-y="-3.6935079" />
+    <path
+       sodipodi:type="arc"
+       style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate"
+       id="path8029"
+       sodipodi:cx="437.6991"
+       sodipodi:cy="391.21735"
+       sodipodi:rx="36.611931"
+       sodipodi:ry="22.627417"
+       d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z"
+       transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)"
+       inkscape:transform-center-x="-20.955902"
+       inkscape:transform-center-y="-13.056625" />
+    <g
+       transform="translate(450.03125,73.843964)"
+       id="g8031"
+       style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new">
+      <path
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8033"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(13.125009,8.1249913)"
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8035"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(32.946437,7.4999913)"
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8037"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(24.910723,-10.267866)"
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8039"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+      <path
+         transform="translate(47.589294,-0.6250087)"
+         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+         sodipodi:ry="3.2142856"
+         sodipodi:rx="3.2142856"
+         sodipodi:cy="401.82648"
+         sodipodi:cx="413.66071"
+         id="path8041"
+         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+         sodipodi:type="arc" />
+    </g>
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151"
+       id="path8043"
+       sodipodi:nodetypes="ccccccccc" />
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542"
+       id="path8045"
+       sodipodi:nodetypes="cccccccccccc" />
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528"
+       id="path8047"
+       sodipodi:nodetypes="ccccccccccccc" />
+    <path
+       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new"
+       d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z"
+       id="path8049"
+       clip-path="url(#clipPath8514)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z"
+       id="path8051" />
+    <path
+       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
+       d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z"
+       id="path8053"
+       clip-path="url(#clipPath8610)"
+       sodipodi:nodetypes="cccccscccc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583"
+       id="path8055"
+       sodipodi:nodetypes="czzzzzzczczczczzzc" />
+    <path
+       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate"
+       d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z"
+       id="path8057"
+       clip-path="url(#clipPath8622)"
+       sodipodi:nodetypes="cccccccccc"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
+       d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z"
+       id="path8059"
+       clip-path="url(#clipPath8906)"
+       sodipodi:nodetypes="cczcccccc"
+       transform="translate(276,136)" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new"
+       d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z"
+       id="path8061"
+       sodipodi:nodetypes="cccccccccccc"
+       clip-path="url(#clipPath3602)" />
+    <path
+       style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+       d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z"
+       id="path8063"
+       sodipodi:nodetypes="czzzzzzzzcc" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate"
+       d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z"
+       id="path8065"
+       sodipodi:nodetypes="czczzcc"
+       clip-path="url(#clipPath3992)" />
+    <g
+       transform="translate(450.03125,73.843964)"
+       style="opacity:1;display:inline;enable-background:new"
+       id="g8067"
+       clip-path="url(#clipPath3986)">
+      <g
+         transform="translate(-174.03125,62.156036)"
+         style="filter:url(#filter3677)"
+         id="g8069">
+        <g
+           style="filter:url(#filter3785)"
+           id="g8071">
+          <path
+             sodipodi:nodetypes="czzccccc"
+             id="path8073"
+             d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+             transform="translate(174.03125,-62.156036)" />
+          <rect
+             y="486.14224"
+             x="1197.8389"
+             height="309.71277"
+             width="333.75412"
+             id="rect8075"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+      </g>
+      <g
+         transform="translate(-174.03125,62.156036)"
+         style="opacity:0.18000004;display:inline;enable-background:new"
+         id="g8077">
+        <g
+           style="filter:url(#filter3785)"
+           id="g8079">
+          <path
+             sodipodi:nodetypes="czzccccc"
+             id="path8081"
+             d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
+             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+             transform="translate(174.03125,-62.156036)" />
+          <rect
+             y="486.14224"
+             x="1197.8389"
+             height="309.71277"
+             width="333.75412"
+             id="rect8083"
+             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+        </g>
+      </g>
+    </g>
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate"
+       d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z"
+       id="path8085"
+       clip-path="url(#clipPath3722)"
+       sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
+    <g
+       style="opacity:1;display:inline;enable-background:new"
+       id="g8087"
+       mask="url(#mask7704)"
+       transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
+       inkscape:transform-center-x="-185.09603"
+       inkscape:transform-center-y="-12.859654">
+      <path
+         transform="translate(8.0045714e-2,-3.125e-2)"
+         style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+         d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
+         id="path8089"
+         sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
+      <g
+         clip-path="url(#clipPath7421)"
+         id="g8091">
+        <path
+           id="path8093"
+           d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new"
+           sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
+        <path
+           id="path8095"
+           d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" />
+        <path
+           id="path8097"
+           d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" />
+        <path
+           id="path8099"
+           d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" />
+        <path
+           id="path8101"
+           d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new"
+           sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
+        <path
+           id="path8103"
+           d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" />
+        <path
+           id="path8105"
+           d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" />
+        <path
+           id="path8107"
+           d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" />
+        <path
+           id="path8109"
+           d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" />
+        <path
+           id="path8111"
+           d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" />
+        <path
+           id="path8113"
+           d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" />
+        <path
+           id="path8115"
+           d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" />
+        <path
+           id="path8117"
+           d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" />
+        <path
+           id="path8119"
+           d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
+           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" />
+        <g
+           id="g8121"
+           style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)">
+          <path
+             sodipodi:nodetypes="czzzczzc"
+             id="path8123"
+             d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+          <path
+             sodipodi:nodetypes="czzzczzc"
+             id="path8125"
+             d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             sodipodi:nodetypes="czzzczzc"
+             id="path8127"
+             d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             sodipodi:nodetypes="czzzczzc"
+             id="path8129"
+             d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.3190906"
+             inkscape:transform-center-x="13.852145"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8131"
+             d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.3190906"
+             inkscape:transform-center-x="13.852145"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8133"
+             d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.3190906"
+             inkscape:transform-center-x="13.852145"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8135"
+             d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.9269042"
+             inkscape:transform-center-x="13.64141"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8137"
+             d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.1542119"
+             inkscape:transform-center-x="13.55068"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8139"
+             d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.4740887"
+             inkscape:transform-center-x="13.41151"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8141"
+             d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.79376"
+             inkscape:transform-center-x="13.258805"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8143"
+             d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8145"
+             d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8147"
+             d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8149"
+             d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8151"
+             d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8153"
+             d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8155"
+             d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8157"
+             d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8159"
+             d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8161"
+             d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.7433893"
+             inkscape:transform-center-x="13.28378"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8163"
+             d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-5.1360724"
+             inkscape:transform-center-x="13.55813"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8165"
+             d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.6370147"
+             inkscape:transform-center-x="13.74758"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8167"
+             d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             inkscape:transform-center-y="-4.4842392"
+             inkscape:transform-center-x="13.79933"
+             sodipodi:nodetypes="czzzczzc"
+             id="path8169"
+             d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+          <path
+             sodipodi:nodetypes="czczc"
+             id="path8171"
+             d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z"
+             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+        </g>
+        <path
+           id="path8173"
+           d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new"
+           sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
+        <path
+           id="path8175"
+           d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" />
+        <path
+           id="path8177"
+           d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" />
+        <path
+           id="path8179"
+           d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" />
+        <path
+           id="path8181"
+           d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new"
+           sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
+        <path
+           id="path8183"
+           d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" />
+        <path
+           id="path8185"
+           d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" />
+        <path
+           id="path8187"
+           d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" />
+        <path
+           id="path8189"
+           d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" />
+        <path
+           id="path8191"
+           d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" />
+        <path
+           id="path8193"
+           d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" />
+        <path
+           id="path8195"
+           d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" />
+        <path
+           id="path8197"
+           d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" />
+        <path
+           id="path8199"
+           d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
+           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" />
+      </g>
+    </g>
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394"
+       id="path8201"
+       sodipodi:nodetypes="ccccccccc" />
+    <path
+       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033"
+       id="path8203"
+       sodipodi:nodetypes="ccccccccccc" />
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer15"
+     inkscape:label="Feet"
+     style="display:inline">
+    <path
+       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate"
+       d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z"
+       id="path8994" />
+    <path
+       style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z"
+       id="path4189"
+       sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
+       d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
+       id="path4191"
+       sodipodi:nodetypes="cccccccccccccccccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+    <path
+       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
+       d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
+       id="path4193"
+       clip-path="url(#clipPath3677)"
+       sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
+    <g
+       id="g3617"
+       clip-path="url(#clipPath3622)"
+       transform="translate(276,136)">
+      <path
+         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
+         id="path4195"
+         d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
+      <path
+         sodipodi:nodetypes="ccccccccccccc"
+         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
+         id="path4197"
+         d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
+    </g>
+    <path
+       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
+       d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z"
+       id="path4199"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
+    <path
+       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new"
+       d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
+       id="path4201"
+       sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
+       clip-path="url(#clipPath4177)"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
+       d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
+       id="path4203"
+       sodipodi:nodetypes="cccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
+       d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
+       id="path4205"
+       sodipodi:nodetypes="cccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+    <g
+       id="g8317"
+       style="filter:url(#filter8333)"
+       clip-path="url(#clipPath8338)"
+       transform="translate(276,136)">
+      <path
+         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
+         clip-path="none"
+         sodipodi:nodetypes="ccccc"
+         id="path4209"
+         d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <rect
+         y="757.19519"
+         x="-55"
+         height="177"
+         width="182"
+         id="rect8315"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </g>
+    <g
+       id="g8346"
+       style="filter:url(#filter8354)"
+       clip-path="url(#clipPath8359)"
+       transform="translate(276,136)">
+      <path
+         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
+         clip-path="none"
+         sodipodi:nodetypes="ccccccc"
+         id="path4207"
+         d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <rect
+         y="696.19519"
+         x="-22"
+         height="176"
+         width="165"
+         id="rect8344"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </g>
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer16"
+     inkscape:label="Left Foot"
+     style="display:inline">
+    <path
+       style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+       d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z"
+       id="path8848"
+       sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
+       d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
+       id="path3635"
+       sodipodi:nodetypes="cccccccccccccccccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="translate(276,136)" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
+       d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
+       id="path3669"
+       clip-path="url(#clipPath3677)"
+       sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
+    <g
+       id="g3628"
+       clip-path="url(#clipPath3636)"
+       transform="translate(276,136)">
+      <path
+         id="path8988"
+         d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
+      <path
+         id="path8990"
+         d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
+    </g>
+    <path
+       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
+       d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z"
+       id="path8992" />
+    <path
+       transform="translate(450.03125,73.843964)"
+       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new"
+       d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
+       id="path4149"
+       sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
+       clip-path="url(#clipPath4177)" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
+       d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
+       id="path3902"
+       sodipodi:nodetypes="cccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="translate(276,136)" />
+    <path
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
+       d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
+       id="path4135"
+       sodipodi:nodetypes="cccccccc"
+       clip-path="url(#clipPath3631)"
+       transform="translate(276,136)" />
+    <g
+       id="g8367"
+       style="filter:url(#filter8379)"
+       clip-path="url(#clipPath8392)"
+       transform="translate(276,136)">
+      <path
+         clip-path="none"
+         sodipodi:nodetypes="ccccccc"
+         id="path4145"
+         d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <rect
+         y="650.19098"
+         x="877.51953"
+         height="172.53406"
+         width="123.03658"
+         id="rect8365"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </g>
+    <g
+       id="g8400"
+       style="filter:url(#filter8404)"
+       clip-path="url(#clipPath8417)"
+       transform="translate(276,136)">
+      <path
+         clip-path="none"
+         sodipodi:nodetypes="ccccc"
+         id="path4147"
+         d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
+         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+      <rect
+         y="677.06104"
+         x="924.89569"
+         height="125.1579"
+         width="142.12846"
+         id="rect8398"
+         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+    </g>
+  </g>
+</svg>
diff --git a/Documentation/logo.txt b/Documentation/logo.txt
index 296f0f7f67e..a2e62445e28 100644
--- a/Documentation/logo.txt
+++ b/Documentation/logo.txt
@@ -1,13 +1,4 @@
-This is the full-colour version of the currently unofficial Linux logo
-("currently unofficial" just means that there has been no paperwork and
-that I have not really announced it yet).  It was created by Larry Ewing,
-and is freely usable as long as you acknowledge Larry as the original
-artist. 
-
-Note that there are black-and-white versions of this available that
-scale down to smaller sizes and are better for letterheads or whatever
-you want to use it for: for the full range of logos take a look at
-Larry's web-page:
-
-	http://www.isc.tamu.edu/~lewing/linux/
+Tux is taking a three month sabbatical to work as a barber, so Tuz is
+standing in.  He's taken pains to ensure you'll hardly notice.
 
+Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
new file mode 100644
index 00000000000..268e5c103dd
--- /dev/null
+++ b/Documentation/networking/ipv6.txt
@@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+	Specifies whether to load the IPv6 module, but disable all
+	its functionality.  This might be used when another module
+	has a dependency on the IPv6 module being loaded, but no
+	IPv6 addresses or operations are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled.
+
+		No IPv6 addresses will be added to interfaces, and
+		it will not be possible to open an IPv6 socket.
+
+		A reboot is required to enable IPv6.
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 1c2ca1dc66f..50725d026da 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -622,7 +622,7 @@ P:	Dirk Opfer
 M:	dirk@opfer-online.de
 S:	Maintained
 
-ARM/PALMTX SUPPORT
+ARM/PALMTX,PALMT5,PALMLD SUPPORT
 P:	Marek Vasut
 M:	marek.vasut@gmail.com
 W:	http://hackndev.com
@@ -1469,8 +1469,6 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported
 
 DOCUMENTATION (/Documentation directory)
-P:	Michael Kerrisk
-M:	mtk.manpages@gmail.com
 P:	Randy Dunlap
 M:	rdunlap@xenotime.net
 L:	linux-doc@vger.kernel.org
@@ -2879,7 +2877,7 @@ P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
-S:	Supported
+S:	Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams
@@ -3352,10 +3350,8 @@ S:	Maintained
 PARISC ARCHITECTURE
 P:	Kyle McMartin
 M:	kyle@mcmartin.ca
-P:	Matthew Wilcox
-M:	matthew@wil.cx
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
+P:	Helge Deller
+M:	deller@gmx.de
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -3543,6 +3539,22 @@ M:	linux@arm.linux.org.uk
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
 
+PXA168 SUPPORT
+P:	Eric Miao
+M:	eric.miao@marvell.com
+P:	Jason Chagas
+M:	jason.chagas@marvell.com
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+T:	git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S:	Supported
+
+PXA910 SUPPORT
+P:	Eric Miao
+M:	eric.miao@marvell.com
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+T:	git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S:	Supported
+
 PXA MMCI DRIVER
 S:	Orphan
 
@@ -3880,6 +3892,15 @@ L:	linux-ide@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported
 
+SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
+P:	Sathya Perla
+M:	sathyap@serverengines.com
+P:      Subbu Seetharaman
+M:      subbus@serverengines.com
+L:      netdev@vger.kernel.org
+W:      http://www.serverengines.com
+S:      Supported
+
 SFC NETWORK DRIVER
 P:	Steve Hodgson
 P:	Ben Hutchings
diff --git a/Makefile b/Makefile
index d04ee0ad1dc..1ab3ebfc909 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc7
-NAME = Erotic Pickled Herring
+EXTRAVERSION =
+NAME = Temporary Tasmanian Devil
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -566,6 +566,12 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 # disable pointer signed / unsigned warnings in gcc 4.0
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
+# disable invalid "can't wrap" optimzations for signed / pointers
+KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+
+# revert to pre-gcc-4.4 behaviour of .eh_frame
+KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
+
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 # But warn user when we do so
 warn-assign = \
@@ -904,12 +910,18 @@ localver = $(subst $(space),, $(string) \
 # and if the SCM is know a tag from the SCM is appended.
 # The appended tag is determined by the SCM used.
 #
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the kernel
+# from the copied source
 ifdef CONFIG_LOCALVERSION_AUTO
-	_localver-auto = $(shell $(CONFIG_SHELL) \
-	                  $(srctree)/scripts/setlocalversion $(srctree))
+
+ifeq ($(wildcard .scmversion),)
+        _localver-auto = $(shell $(CONFIG_SHELL) \
+                         $(srctree)/scripts/setlocalversion $(srctree))
+else
+        _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
 	localver-auto  = $(LOCALVERSION)$(_localver-auto)
 endif
 
@@ -1537,7 +1549,7 @@ quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
       cmd_depmod = \
 	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
 		$(DEPMOD) -ae -F System.map                                     \
-		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
+		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
 		$(KERNELRELEASE);                                               \
 	fi
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbfdf87f993..e62b37a15a1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -241,6 +241,7 @@ config ARCH_VERSATILE
 config ARCH_AT91
 	bool "Atmel AT91"
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
@@ -477,12 +478,29 @@ config ARCH_PXA
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
+	select PLAT_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
+config ARCH_MMP
+	bool "Marvell PXA168/910"
+	depends on MMU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/910 processor line.
+
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
@@ -617,6 +635,9 @@ source "arch/arm/mach-loki/Kconfig"
 source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
 
@@ -686,12 +707,15 @@ config PLAT_IOP
 config PLAT_ORION
 	bool
 
+config PLAT_PXA
+	bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3
-	default y if PXA27x || PXA3xx
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -915,6 +939,23 @@ config NODES_SHIFT
 	default "2"
 	depends on NEED_MULTIPLE_NODES
 
+config HIGHMEM
+	bool "High Memory Support (EXPERIMENTAL)"
+	depends on MMU && EXPERIMENTAL
+	help
+	  The address space of ARM processors is only 4 Gigabytes large
+	  and it has to accommodate user address space, kernel address
+	  space as well as some memory mapped IO. That means that, if you
+	  have a large amount of physical memory and/or IO, not all of the
+	  memory can be "permanently mapped" by the kernel. The physical
+	  memory that is not permanently mapped is called "high memory".
+
+	  Depending on the selected kernel/user memory split, minimum
+	  vmalloc space and actual amount of RAM, you may not need this
+	  option which should result in a slightly faster kernel.
+
+	  If unsure, say n.
+
 source "mm/Kconfig"
 
 config LEDS
@@ -1092,7 +1133,7 @@ source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_SA1100
 	bool
-	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
+	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
 	default y
 
 config CPU_FREQ_SA1110
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 192ee01a9ba..a71fd941ade 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -2,18 +2,29 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
+# RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
-	default y
+	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
-	  faster. However, when a problem occurs with the kernel, the
-	  information that is reported is severely limited. Most people
-	  should say Y here.
+	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
+	  when a problem occurs with the kernel, the information that is
+	  reported is severely limited.
+
+config ARM_UNWIND
+	bool "Enable stack unwinding support"
+	depends on AEABI && EXPERIMENTAL
+	default y
+	help
+	  This option enables stack unwinding support in the kernel
+	  using the information automatically generated by the
+	  compiler. The resulting kernel image is slightly bigger but
+	  the performance is not affected. Currently, this feature
+	  only works with EABI compilers. If unsure say Y.
 
 config DEBUG_USER
 	bool "Verbose user fault messages"
@@ -66,7 +77,7 @@ config DEBUG_ICEDCC
 	  Say Y here if you want the debug print routines to direct their
 	  output to the EmbeddedICE macrocell's DCC channel using
 	  co-processor 14. This is known to work on the ARM9 style ICE
-	  channel.
+	  channel and on the XScale with the PEEDI.
 
 	  It does include a timeout to ensure that the system does not
 	  totally freeze when there is nothing connected to read.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 24e0f018769..95186ef17e1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -85,6 +85,10 @@ else
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
 endif
 
+ifeq ($(CONFIG_ARM_UNWIND),y)
+CFLAGS_ABI	+=-funwind-tables
+endif
+
 # Need -Uarm for gcc < 3.x
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
 KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
@@ -105,6 +109,8 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
  textofs-$(CONFIG_SA1111)	   := 0x00208000
 endif
  machine-$(CONFIG_ARCH_PXA)	   := pxa
+ machine-$(CONFIG_ARCH_MMP)	   := mmp
+    plat-$(CONFIG_PLAT_PXA)	   := pxa
  machine-$(CONFIG_ARCH_L7200)	   := l7200
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
  textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 77d614232d8..d14b827adcd 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -27,6 +27,12 @@
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
+#elif defined(CONFIG_CPU_XSCALE)
+		.macro	loadsp, rb
+		.endm
+		.macro	writeb, ch, rb
+		mcr	p14, 0, \ch, c8, c0, 0
+		.endm
 #else
 		.macro	loadsp, rb
 		.endm
@@ -630,6 +636,18 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		b	__armv4_mmu_cache_flush
 
+		.word	0x56158000		@ PXA168
+		.word	0xfffff000
+		b __armv4_mmu_cache_on
+		b __armv4_mmu_cache_off
+		b __armv5tej_mmu_cache_flush
+
+		.word	0x56056930
+		.word	0xff0ffff0		@ PXA935
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
+
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
 		b	__armv4_mmu_cache_on
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 3fc08413fff..393c8164131 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -46,6 +46,21 @@ static void icedcc_putc(int ch)
 
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+#elif defined(CONFIG_CPU_XSCALE)
+
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
+
+	do {
+		if (--i < 0)
+			return;
+
+		asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
+	} while (status & (1 << 28));
+
+	asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
+}
 
 #else
 
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 153a07e7222..a5924b9b88b 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -11,6 +11,11 @@ OUTPUT_ARCH(arm)
 ENTRY(_start)
 SECTIONS
 {
+  /DISCARD/ : {
+    *(.ARM.exidx*)
+    *(.ARM.extab*)
+  }
+
   . = TEXT_START;
   _text = .;
 
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index f030f0775be..734ac913599 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/page-flags.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
@@ -349,6 +350,12 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 
 	BUG_ON(!valid_dma_direction(dir));
 
+	if (PageHighMem(page)) {
+		dev_err(dev, "DMA buffer bouncing of HIGHMEM pages "
+			     "is not supported\n");
+		return ~0;
+	}
+
 	return map_single(dev, page_address(page) + offset, size, dir);
 }
 EXPORT_SYMBOL(dma_map_page);
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 697c6491399..7713a08bb10 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -124,37 +124,6 @@ static int scoop_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
-unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
-{
-	unsigned short gpio_bit;
-	unsigned long flag;
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-
-	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit;
-	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
-	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
-	return gpio_bit;
-}
-
-unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit)
-{
-	unsigned short gpio_bit;
-	unsigned long flag;
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-
-	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit;
-	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
-	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
-	return gpio_bit;
-}
-
-EXPORT_SYMBOL(set_scoop_gpio);
-EXPORT_SYMBOL(reset_scoop_gpio);
-
 unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 780bbf7cb26..140f1d721d5 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -29,8 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
new file mode 100644
index 00000000000..1cab4e79d36
--- /dev/null
+++ b/arch/arm/configs/acs5k_defconfig
@@ -0,0 +1,1233 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Dec 16 13:31:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+CONFIG_MACH_KS8695=y
+CONFIG_MACH_DSM320=y
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_PRISM54=m
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
new file mode 100644
index 00000000000..8e3d084afd7
--- /dev/null
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -0,0 +1,941 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Jan  6 13:23:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+# CONFIG_MACH_KS8695 is not set
+# CONFIG_MACH_DSM320 is not set
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index b1cd331aaec..c66dd399e42 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -89,7 +89,6 @@ CONFIG_SA1100_ASSABET=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index 80222feb7da..f264846218a 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -91,7 +91,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 CONFIG_SA1100_BADGE4=y
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index ee130b528bd..2b4c0668b1b 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -93,7 +93,6 @@ CONFIG_SA1100_CERF_FLASH_16MB=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index 1039f366bf8..797b790cba7 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Sun Oct  5 11:05:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb  1 16:31:36 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,7 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
@@ -47,12 +46,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -80,27 +79,21 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -108,11 +101,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -129,6 +120,11 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -138,7 +134,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -165,17 +160,19 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
 # CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
@@ -185,7 +182,9 @@ CONFIG_DMABOUNCE=y
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set
-CONFIG_MACH_EM_X270=y
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_COLIBRI is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
@@ -204,14 +203,6 @@ CONFIG_PXA_SSP=y
 # CONFIG_PXA_PWM is not set
 
 #
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
 # Processor Type
 #
 CONFIG_CPU_32=y
@@ -232,6 +223,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -242,6 +235,7 @@ CONFIG_PCI_HOST_ITE8152=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
@@ -287,14 +281,13 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -327,6 +320,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -345,6 +340,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -389,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -399,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -420,8 +418,6 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
@@ -434,15 +430,15 @@ CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBTUART is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -467,6 +463,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -521,9 +518,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
@@ -535,6 +530,8 @@ CONFIG_MTD_PXA2XX=y
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -563,6 +560,12 @@ CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -642,6 +645,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -756,26 +761,30 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
 # CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=y
+CONFIG_8139TOO=m
 # CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
@@ -783,10 +792,12 @@ CONFIG_8139TOO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -797,8 +808,6 @@ CONFIG_8139TOO=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_USB is not set
 # CONFIG_LIBERTAS_CS is not set
@@ -811,10 +820,16 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -879,22 +894,22 @@ CONFIG_KEYBOARD_PXA27x=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+CONFIG_TOUCHSCREEN_UCB1400=m
+# CONFIG_TOUCHSCREEN_WM97XX is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -933,6 +948,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
@@ -1009,26 +1025,45 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -1043,17 +1078,19 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1064,11 +1101,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
+CONFIG_UCB1400_CORE=m
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1077,13 +1120,117 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
 # Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -1095,6 +1242,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1128,6 +1276,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -1138,13 +1287,17 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_CARMINE is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
 # CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
 # CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
 # Display device support
@@ -1167,6 +1320,7 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1182,81 +1336,16 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
@@ -1269,9 +1358,37 @@ CONFIG_HID_DEBUG=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1291,12 +1408,15 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1306,6 +1426,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_MUSB_HDRC is not set
 
 #
@@ -1314,20 +1436,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1355,6 +1477,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1371,13 +1494,20 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1385,11 +1515,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SPI is not set
 # CONFIG_MMC_SDRICOH_CS is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1400,8 +1531,7 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 # CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_CM_X270=y
+CONFIG_LEDS_GPIO=m
 # CONFIG_LEDS_PCA955X is not set
 
 #
@@ -1410,6 +1540,7 @@ CONFIG_LEDS_CM_X270=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1441,37 +1572,43 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1483,14 +1620,16 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1520,15 +1659,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1548,6 +1685,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1567,6 +1705,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1678,19 +1817,29 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1705,13 +1854,16 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1783,14 +1935,18 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 744086fff41..4cf3bde1c52 100644
--- a/arch/arm/configs/colibri_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Mon Dec  3 13:36:09 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 16:18:17 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -42,22 +43,30 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -70,29 +79,38 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,6 +124,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -115,9 +134,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -131,41 +148,58 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
 CONFIG_MACH_COLIBRI=y
+# CONFIG_MACH_COLIBRI300 is not set
 # CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_RAUMFELD_PROTO is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_PXA_PWM is not set
 
 #
 # Processor Type
@@ -174,6 +208,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -187,6 +222,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -198,28 +234,33 @@ CONFIG_XSCALE_PMU=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -232,6 +273,12 @@ CONFIG_CMDLINE=""
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -246,6 +293,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -253,21 +302,18 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -275,6 +321,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -304,26 +351,26 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -332,7 +379,9 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
@@ -342,12 +391,14 @@ CONFIG_VLAN_8021Q=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -382,15 +433,6 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_KS959_DONGLE is not set
 
 #
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
 # FIR device drivers
 #
 # CONFIG_USB_IRDA is not set
@@ -410,7 +452,6 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-# CONFIG_BT_HCIUSB is not set
 # CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
@@ -419,21 +460,20 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=y
+CONFIG_LIB80211_CRYPT_CCMP=y
+CONFIG_LIB80211_CRYPT_TKIP=y
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -448,6 +488,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -457,9 +499,11 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -510,9 +554,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
@@ -538,6 +580,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
@@ -556,6 +599,11 @@ CONFIG_MTD_ONENAND=y
 # CONFIG_MTD_ONENAND_SIM is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -569,36 +617,41 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -610,7 +663,6 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -631,6 +683,10 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -638,11 +694,17 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -654,10 +716,15 @@ CONFIG_DM9000=y
 CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_ZD1211RW is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -670,7 +737,6 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -710,6 +776,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -718,20 +785,25 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 
 #
 # Hardware I/O ports
@@ -746,9 +818,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -764,45 +838,50 @@ CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PXA is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PXA is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -811,16 +890,35 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -828,7 +926,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -848,6 +949,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -856,6 +958,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -863,9 +966,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -879,23 +985,46 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -907,6 +1036,7 @@ CONFIG_DAB=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -914,8 +1044,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -928,13 +1058,20 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 
 #
 # Display device support
@@ -964,12 +1101,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -979,18 +1111,26 @@ CONFIG_HID=y
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
 # USB HID Boot Protocol drivers
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+# CONFIG_HID_APPLE is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -999,29 +1139,40 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1029,19 +1180,14 @@ CONFIG_USB_DEVICEFS=y
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1059,6 +1205,7 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1066,17 +1213,21 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1085,7 +1236,7 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1101,30 +1252,29 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
 CONFIG_USB_DUMMY_HCD=m
 CONFIG_USB_GADGET_DUALSPEED=y
@@ -1134,21 +1284,32 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 # CONFIG_LEDS_CLASS is not set
 
@@ -1163,6 +1324,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 # CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -1190,6 +1353,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1199,36 +1365,45 @@ CONFIG_RTC_DRV_PCF8583=m
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1254,15 +1429,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1283,9 +1456,13 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1293,20 +1470,18 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1361,9 +1536,6 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1371,6 +1543,7 @@ CONFIG_INSTRUMENTATION=y
 CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1378,9 +1551,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1396,16 +1572,40 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1415,58 +1615,114 @@ CONFIG_DEBUG_LL=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
new file mode 100644
index 00000000000..4774a36fa74
--- /dev/null
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -0,0 +1,1156 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 16:13:20 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+CONFIG_MACH_COLIBRI300=y
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_RAUMFELD_PROTO is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_AX88796=y
+# CONFIG_AX88796_93CX6 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index f7622e65816..1aa62249031 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -113,7 +113,6 @@ CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_COLLIE=y
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
new file mode 100644
index 00000000000..e9955b786c8
--- /dev/null
+++ b/arch/arm/configs/em_x270_defconfig
@@ -0,0 +1,1741 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb  1 16:43:31 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+CONFIG_MACH_EM_X270=y
+CONFIG_MACH_EXEDA=y
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=1
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_APMPOWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_FB_MBX=m
+# CONFIG_FB_MBX_DEBUG is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 8f986e9f1c6..1502957db2c 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_H3800 is not set
 CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
@@ -100,7 +99,6 @@ CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_SHANNON is not set
 # CONFIG_SA1100_SIMPAD is not set
 # CONFIG_SA1100_SSP is not set
-# CONFIG_H3600_SLEEVE is not set
 
 #
 # Processor Type
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 1c8fb89a673..db0708d5cbe 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -91,7 +91,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 CONFIG_SA1100_HACKKIT=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 81fadafae02..f3074e49f2f 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -178,7 +178,6 @@ CONFIG_DMABOUNCE=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 4bc38078d58..c367ae44012 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Thu Dec  4 15:27:39 2008
+# Linux kernel version: 2.6.29-rc5
+# Tue Mar  3 21:45:57 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
@@ -42,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
+CONFIG_LOG_BUF_SHIFT=19
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
@@ -53,6 +62,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -83,6 +93,7 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -93,7 +104,6 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,11 +111,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,7 +129,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -132,7 +139,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -159,11 +165,13 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -171,14 +179,8 @@ CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -214,6 +216,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -242,7 +245,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
@@ -291,6 +293,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -355,6 +358,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,12 +372,27 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_NL80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -398,6 +417,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -451,9 +471,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
@@ -481,6 +499,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
@@ -491,6 +510,12 @@ CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -568,6 +593,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -682,6 +709,9 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -695,6 +725,7 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -710,7 +741,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -720,6 +750,7 @@ CONFIG_NET_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -754,8 +785,39 @@ CONFIG_MV643XX_ETH=y
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -791,13 +853,20 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -807,7 +876,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -839,11 +912,11 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -879,6 +952,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -905,8 +979,6 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -925,12 +997,12 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -952,10 +1024,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1012,11 +1086,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1024,12 +1096,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1058,6 +1133,7 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1087,7 +1163,6 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 # CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
 # CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1135,21 +1210,51 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
+CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1178,7 +1283,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
 
@@ -1227,6 +1332,7 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1238,16 +1344,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1268,9 +1372,9 @@ CONFIG_UDF_NLS=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -1286,10 +1390,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1309,6 +1410,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1393,7 +1495,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1416,6 +1518,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -1424,7 +1527,7 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1435,7 +1538,10 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -1446,11 +1552,14 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1464,19 +1573,22 @@ CONFIG_DEBUG_LL=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1496,7 +1608,7 @@ CONFIG_CRYPTO_MANAGER=m
 CONFIG_CRYPTO_CBC=m
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_ECB=y
 # CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_XTS is not set
@@ -1510,7 +1622,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1527,9 +1639,9 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
@@ -1560,6 +1672,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index a1cc34f2560..56ae56899d2 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -87,7 +87,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 73ba62b7106..82428c2f234 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Sun Dec 30 13:02:54 2007
+# Linux kernel version: 2.6.29-rc3
+# Fri Jan 30 12:42:03 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
@@ -12,6 +13,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +23,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -41,16 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -65,31 +75,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,8 +123,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -114,9 +133,7 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -130,41 +147,58 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
 # CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
 CONFIG_MACH_MAGICIAN=y
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
 
 #
 # Processor Type
@@ -173,6 +207,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -186,6 +221,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -197,28 +233,33 @@ CONFIG_XSCALE_PMU=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -229,9 +270,10 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
@@ -239,6 +281,7 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -247,6 +290,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -263,6 +307,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -270,21 +316,18 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -316,33 +359,15 @@ CONFIG_IP_PNP=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -353,6 +378,7 @@ CONFIG_NETFILTER=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -390,20 +416,17 @@ CONFIG_IRTTY_SIR=m
 # Dongle support
 #
 # CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
 
 #
 # FIR device drivers
 #
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -417,17 +440,17 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,25 +465,28 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -473,6 +499,7 @@ CONFIG_MTD_BLOCK=m
 #
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -487,6 +514,7 @@ CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -497,9 +525,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PXA2XX is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_SHARP_SL is not set
@@ -523,6 +549,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -531,10 +563,12 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -547,7 +581,6 @@ CONFIG_BLK_DEV=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -563,6 +596,20 @@ CONFIG_NETDEVICES=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -612,7 +659,26 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -625,9 +691,11 @@ CONFIG_INPUT_UINPUT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -642,6 +710,7 @@ CONFIG_SERIAL_PXA=y
 # CONFIG_SERIAL_PXA_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -649,37 +718,45 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
+CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -688,19 +765,39 @@ CONFIG_I2C_PXA=m
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 CONFIG_W1=y
 
 #
 # 1-wire Bus Masters
 #
+# CONFIG_W1_MASTER_DS2490 is not set
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_DS1WM=y
+# CONFIG_W1_MASTER_GPIO is not set
 
 #
 # 1-wire Slaves
@@ -709,32 +806,56 @@ CONFIG_W1_MASTER_DS1WM=y
 # CONFIG_W1_SLAVE_SMEM is not set
 # CONFIG_W1_SLAVE_DS2433 is not set
 CONFIG_W1_SLAVE_DS2760=y
+# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
 CONFIG_BATTERY_DS2760=y
+# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -745,6 +866,7 @@ CONFIG_HTC_PASIC3=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -752,8 +874,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -765,13 +887,21 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
 
 #
 # Display device support
@@ -802,15 +932,8 @@ CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -824,53 +947,185 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=m
+# CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_HID=m
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -899,6 +1154,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -908,17 +1166,26 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -927,19 +1194,18 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -965,15 +1231,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -997,9 +1261,13 @@ CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1007,14 +1275,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1076,6 +1343,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1083,15 +1351,18 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
@@ -1100,17 +1371,41 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1119,55 +1414,110 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 83c817f31bc..b0698722e0c 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -165,6 +165,7 @@ CONFIG_ARCH_MV78XX0=y
 # Marvell MV78xx0 Implementations
 #
 CONFIG_MACH_DB78X00_BP=y
+CONFIG_MACH_RD78X00_MASA=y
 
 #
 # Boot options
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index d81ea219c93..36cd62edd05 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -91,7 +91,6 @@ CONFIG_ASSABET_NEPONSET=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
new file mode 100644
index 00000000000..8fb918d9ba6
--- /dev/null
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -0,0 +1,2061 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 14:17:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP_3430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+CONFIG_SMC911X=m
+CONFIG_SMSC911X=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+# CONFIG_DVB_STV0288 is not set
+# CONFIG_DVB_STB6000 is not set
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+# CONFIG_DVB_TDA8261 is not set
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+# CONFIG_DVB_TUNER_CX24113 is not set
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+# CONFIG_DVB_CX24116 is not set
+# CONFIG_DVB_SI21XX is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+# CONFIG_DVB_LGDT3304 is not set
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6405 is not set
+CONFIG_DVB_ISL6421=m
+# CONFIG_DVB_LGS8GL5 is not set
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_AF9013 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_OVERO is not set
+CONFIG_SND_OMAP_SOC_SDP3430=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index a8ee6984a09..020e6a8a9e5 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -481,7 +481,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
@@ -1177,7 +1177,7 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T86=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index a6b47ea8e46..f2d2dda2594 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -88,7 +88,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
new file mode 100644
index 00000000000..db5faeaec96
--- /dev/null
+++ b/arch/arm/configs/pxa168_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Fri Mar 20 13:43:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_MACH_TAVOREVB is not set
+
+#
+# Marvell PXA168/910 Implmentations
+#
+CONFIG_MACH_ASPENITE=y
+CONFIG_MACH_ZYLONITE2=y
+# CONFIG_MACH_TTC_DKB is not set
+CONFIG_CPU_PXA168=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_MOHAWK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
new file mode 100644
index 00000000000..8c7e299f1d6
--- /dev/null
+++ b/arch/arm/configs/pxa910_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Fri Mar 20 13:45:12 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_MACH_TAVOREVB=y
+
+#
+# Marvell PXA168/910 Implmentations
+#
+# CONFIG_MACH_ASPENITE is not set
+# CONFIG_MACH_ZYLONITE2 is not set
+CONFIG_MACH_TTC_DKB=y
+CONFIG_CPU_PXA910=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_MOHAWK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
new file mode 100644
index 00000000000..593102da8cd
--- /dev/null
+++ b/arch/arm/configs/rx51_defconfig
@@ -0,0 +1,1821 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 15:28:56 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+CONFIG_MACH_NOKIA_RX51=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+CONFIG_LOCK_STAT=y
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index d052c8f8051..984f7096a53 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -87,7 +87,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 9b6561d119a..90235bf7a1d 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,88 +1,174 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git3
-# Sat Jul 16 15:21:47 2005
+# Linux kernel version: 2.6.28-git6
+# Thu Jan  8 17:14:47 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_FREEZER is not set
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_SHARK=y
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Processor Type
@@ -91,14 +177,20 @@ CONFIG_CPU_32=y
 CONFIG_CPU_SA110=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
@@ -107,22 +199,40 @@ CONFIG_ISA=y
 CONFIG_ISA_DMA=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_HOST_VIA82C505=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
@@ -135,6 +245,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -143,13 +259,16 @@ CONFIG_CMDLINE=""
 #
 # At least one emulation must be selected
 #
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FPE_FASTFPE=y
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -158,44 +277,104 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
 
 #
-# Device Drivers
+# Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
-# Generic Driver Options
+# Network testing
 #
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Memory Technology Devices (MTD)
+# Device Drivers
 #
-# CONFIG_MTD is not set
 
 #
-# Parallel port support
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 # CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
@@ -210,52 +389,78 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_IDE_ARM=y
-# CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -275,17 +480,20 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_7000FASST is not set
@@ -296,12 +504,18 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_EATA is not set
@@ -314,20 +528,15 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
@@ -336,123 +545,57 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -462,56 +605,69 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
+CONFIG_CS89x0_NOEEPROM=y
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_SKY2 is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -519,18 +675,17 @@ CONFIG_CS89x0=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -540,7 +695,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -553,14 +707,25 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -580,16 +745,22 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -599,90 +770,122 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# TPM devices
+# Sonics Silicon Backplane
 #
-# CONFIG_TCG_TPM is not set
+# CONFIG_SSB is not set
 
 #
-# I2C support
+# Multifunction device drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -691,126 +894,132 @@ CONFIG_FB_CYBER2000=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
 CONFIG_SOUND_OSS=m
 # CONFIG_SOUND_TRACEINIT is not set
 # CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-CONFIG_SOUND_ADLIB=m
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
 # CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
 # CONFIG_SOUND_VMIDI is not set
 # CONFIG_SOUND_TRIX is not set
 # CONFIG_SOUND_MSS is not set
 # CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
 # CONFIG_SOUND_PAS is not set
 # CONFIG_SOUND_PSS is not set
 CONFIG_SOUND_SB=m
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
 # CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
 # CONFIG_SOUND_UART6850 is not set
 # CONFIG_SOUND_AEDSP16 is not set
 # CONFIG_SOUND_KAHLUA is not set
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# USB Gadget Support
+# Enable Host or Gadget support to see Inventra options
 #
-# CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
+# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -834,14 +1043,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -855,22 +1062,27 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -897,11 +1109,9 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -942,30 +1152,74 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_LL is not set
 
 #
@@ -973,19 +1227,23 @@ CONFIG_DEBUG_USER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
-# Hardware crypto devices
-#
-
-#
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index 03f783e696b..685d2b51320 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -89,7 +89,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 6cbd8fdc9f1..bfb0cb9aaa9 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -94,6 +94,14 @@
 # endif
 #endif
 
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE mohawk
+# endif
+#endif
+
 #if defined(CONFIG_CPU_FEROCEON)
 # define MULTI_CACHE 1
 #endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 22cb14ec343..ff46dfa68a9 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,10 +15,20 @@
  * must not be used by drivers.
  */
 #ifndef __arch_page_to_dma
+
+#if !defined(CONFIG_HIGHMEM)
 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 {
 	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
 }
+#elif defined(__pfn_to_bus)
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+}
+#else
+#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
+#endif
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
@@ -57,6 +67,8 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
 extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
+extern void dma_cache_maint_page(struct page *page, unsigned long offset,
+				 size_t size, int rw);
 
 /*
  * Return whether the given device DMA address mask can be supported
@@ -316,7 +328,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	BUG_ON(!valid_dma_direction(dir));
 
 	if (!arch_is_coherent())
-		dma_cache_maint(page_address(page) + offset, size, dir);
+		dma_cache_maint_page(page, offset, size, dir);
 
 	return page_to_dma(dev, page) + offset;
 }
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index df5638f3643..7edf3536df2 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -19,21 +19,17 @@
 #include <asm/system.h>
 #include <asm/scatterlist.h>
 
-typedef unsigned int dmach_t;
-
 #include <mach/isa-dma.h>
 
 /*
- * DMA modes
+ * The DMA modes reflect the settings for the ISA DMA controller
  */
-typedef unsigned int dmamode_t;
-
-#define DMA_MODE_MASK	3
+#define DMA_MODE_MASK	 0xcc
 
-#define DMA_MODE_READ	 0
-#define DMA_MODE_WRITE	 1
-#define DMA_MODE_CASCADE 2
-#define DMA_AUTOINIT	 4
+#define DMA_MODE_READ	 0x44
+#define DMA_MODE_WRITE	 0x48
+#define DMA_MODE_CASCADE 0xc0
+#define DMA_AUTOINIT	 0x10
 
 extern spinlock_t  dma_spin_lock;
 
@@ -52,44 +48,44 @@ static inline void release_dma_lock(unsigned long flags)
 /* Clear the 'DMA Pointer Flip Flop'.
  * Write 0 for LSB/MSB, 1 for MSB/LSB access.
  */
-#define clear_dma_ff(channel)
+#define clear_dma_ff(chan)
 
 /* Set only the page register bits of the transfer address.
  *
  * NOTE: This is an architecture specific function, and should
  *       be hidden from the drivers
  */
-extern void set_dma_page(dmach_t channel, char pagenr);
+extern void set_dma_page(unsigned int chan, char pagenr);
 
 /* Request a DMA channel
  *
  * Some architectures may need to do allocate an interrupt
  */
-extern int  request_dma(dmach_t channel, const char * device_id);
+extern int  request_dma(unsigned int chan, const char * device_id);
 
 /* Free a DMA channel
  *
  * Some architectures may need to do free an interrupt
  */
-extern void free_dma(dmach_t channel);
+extern void free_dma(unsigned int chan);
 
 /* Enable DMA for this channel
  *
  * On some architectures, this may have other side effects like
  * enabling an interrupt and setting the DMA registers.
  */
-extern void enable_dma(dmach_t channel);
+extern void enable_dma(unsigned int chan);
 
 /* Disable DMA for this channel
  *
  * On some architectures, this may have other side effects like
  * disabling an interrupt or whatever.
  */
-extern void disable_dma(dmach_t channel);
+extern void disable_dma(unsigned int chan);
 
 /* Test whether the specified channel has an active DMA transfer
  */
-extern int dma_channel_active(dmach_t channel);
+extern int dma_channel_active(unsigned int chan);
 
 /* Set the DMA scatter gather list for this channel
  *
@@ -97,7 +93,7 @@ extern int dma_channel_active(dmach_t channel);
  * especially since some DMA architectures don't update the
  * DMA address immediately, but defer it to the enable_dma().
  */
-extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
 
 /* Set the DMA address for this channel
  *
@@ -105,9 +101,9 @@ extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
  * especially since some DMA architectures don't update the
  * DMA address immediately, but defer it to the enable_dma().
  */
-extern void __set_dma_addr(dmach_t channel, void *addr);
-#define set_dma_addr(channel, addr)				\
-	__set_dma_addr(channel, bus_to_virt(addr))
+extern void __set_dma_addr(unsigned int chan, void *addr);
+#define set_dma_addr(chan, addr)				\
+	__set_dma_addr(chan, bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *
@@ -115,7 +111,7 @@ extern void __set_dma_addr(dmach_t channel, void *addr);
  * especially since some DMA architectures don't update the
  * DMA count immediately, but defer it to the enable_dma().
  */
-extern void set_dma_count(dmach_t channel, unsigned long count);
+extern void set_dma_count(unsigned int chan, unsigned long count);
 
 /* Set the transfer direction for this channel
  *
@@ -124,11 +120,11 @@ extern void set_dma_count(dmach_t channel, unsigned long count);
  * DMA transfer direction immediately, but defer it to the
  * enable_dma().
  */
-extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+extern void set_dma_mode(unsigned int chan, unsigned int mode);
 
 /* Set the transfer speed for this channel
  */
-extern void set_dma_speed(dmach_t channel, int cycle_ns);
+extern void set_dma_speed(unsigned int chan, int cycle_ns);
 
 /* Get DMA residue count. After a DMA transfer, this
  * should return zero. Reading this while a DMA transfer is
@@ -136,7 +132,7 @@ extern void set_dma_speed(dmach_t channel, int cycle_ns);
  * If called before the channel has been used, it may return 1.
  * Otherwise, it returns the number of _bytes_ left to transfer.
  */
-extern int  get_dma_residue(dmach_t channel);
+extern int  get_dma_residue(unsigned int chan);
 
 #ifndef NO_DMA
 #define NO_DMA	255
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index a58378c343b..def8eac6e89 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_ABS32	2
 #define R_ARM_CALL	28
 #define R_ARM_JUMP24	29
+#define R_ARM_PREL31	42
 
 /*
  * These are used to set parameters in the core dumps.
diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h
new file mode 100644
index 00000000000..bbae919bceb
--- /dev/null
+++ b/arch/arm/include/asm/fixmap.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+/*
+ * Nothing too fancy for now.
+ *
+ * On ARM we already have well known fixed virtual addresses imposed by
+ * the architecture such as the vector page which is located at 0xffff0000,
+ * therefore a second level page table is already allocated covering
+ * 0xfff00000 upwards.
+ *
+ * The cache flushing code in proc-xscale.S uses the virtual area between
+ * 0xfffe0000 and 0xfffeffff.
+ */
+
+#define FIXADDR_START		0xfff00000UL
+#define FIXADDR_TOP		0xfffe0000UL
+#define FIXADDR_SIZE		(FIXADDR_TOP - FIXADDR_START)
+
+#define FIX_KMAP_BEGIN		0
+#define FIX_KMAP_END		(FIXADDR_SIZE >> PAGE_SHIFT)
+
+#define __fix_to_virt(x)	(FIXADDR_START + ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	(((x) - FIXADDR_START) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	if (idx >= FIX_KMAP_END)
+		__this_fixmap_does_not_exist();
+	return __fix_to_virt(idx);
+}
+
+static inline unsigned int virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
index dfb8330599f..46492a63a7c 100644
--- a/arch/arm/include/asm/hardware/scoop.h
+++ b/arch/arm/include/asm/hardware/scoop.h
@@ -63,7 +63,5 @@ struct scoop_pcmcia_config {
 extern struct scoop_pcmcia_config *platform_scoop_config;
 
 void reset_scoop(struct device *dev);
-unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit);
-unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit);
 unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
 void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
new file mode 100644
index 00000000000..7f36d00600b
--- /dev/null
+++ b/arch/arm/include/asm/highmem.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#include <asm/kmap_types.h>
+
+#define PKMAP_BASE		(PAGE_OFFSET - PMD_SIZE)
+#define LAST_PKMAP		PTRS_PER_PTE
+#define LAST_PKMAP_MASK		(LAST_PKMAP - 1)
+#define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define kmap_prot		PAGE_KERNEL
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+extern pte_t *pkmap_page_table;
+
+#define ARCH_NEEDS_KMAP_HIGH_GET
+
+extern void *kmap_high(struct page *page);
+extern void *kmap_high_get(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *kmap(struct page *page);
+extern void kunmap(struct page *page);
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+extern struct page *kmap_atomic_to_page(const void *ptr);
+
+#endif
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index bda489f9f01..f7bd52b1c36 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -17,6 +17,8 @@
 #define HWCAP_CRUNCH	1024
 #define HWCAP_THUMBEE	2048
 #define HWCAP_NEON	4096
+#define HWCAP_VFPv3	8192
+#define HWCAP_VFPv3D16	16384
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*
diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index 45def13ee17..d16ec97ec9a 100644
--- a/arch/arm/include/asm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
@@ -18,6 +18,7 @@ enum km_type {
 	KM_IRQ1,
 	KM_SOFTIRQ0,
 	KM_SOFTIRQ1,
+	KM_L2_CACHE,
 	KM_TYPE_NR
 };
 
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index fc7278ea714..9e614a18e68 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -15,13 +15,13 @@ struct dma_struct;
 typedef struct dma_struct dma_t;
 
 struct dma_ops {
-	int	(*request)(dmach_t, dma_t *);		/* optional */
-	void	(*free)(dmach_t, dma_t *);		/* optional */
-	void	(*enable)(dmach_t, dma_t *);		/* mandatory */
-	void 	(*disable)(dmach_t, dma_t *);		/* mandatory */
-	int	(*residue)(dmach_t, dma_t *);		/* optional */
-	int	(*setspeed)(dmach_t, dma_t *, int);	/* optional */
-	char	*type;
+	int	(*request)(unsigned int, dma_t *);		/* optional */
+	void	(*free)(unsigned int, dma_t *);			/* optional */
+	void	(*enable)(unsigned int, dma_t *);		/* mandatory */
+	void 	(*disable)(unsigned int, dma_t *);		/* mandatory */
+	int	(*residue)(unsigned int, dma_t *);		/* optional */
+	int	(*setspeed)(unsigned int, dma_t *, int);	/* optional */
+	const char *type;
 };
 
 struct dma_struct {
@@ -34,24 +34,21 @@ struct dma_struct {
 	unsigned int	active:1;	/* Transfer active		*/
 	unsigned int	invalid:1;	/* Address/Count changed	*/
 
-	dmamode_t	dma_mode;	/* DMA mode			*/
+	unsigned int	dma_mode;	/* DMA mode			*/
 	int		speed;		/* DMA speed			*/
 
 	unsigned int	lock;		/* Device is allocated		*/
 	const char	*device_id;	/* Device name			*/
 
-	unsigned int	dma_base;	/* Controller base address	*/
-	int		dma_irq;	/* Controller IRQ		*/
-	struct scatterlist cur_sg;	/* Current controller buffer	*/
-	unsigned int	state;
-
-	struct dma_ops	*d_ops;
+	const struct dma_ops *d_ops;
 };
 
-/* Prototype: void arch_dma_init(dma)
- * Purpose  : Initialise architecture specific DMA
- * Params   : dma - pointer to array of DMA structures
+/*
+ * isa_dma_add - add an ISA-style DMA channel
  */
-extern void arch_dma_init(dma_t *dma);
+extern int isa_dma_add(unsigned int, dma_t *dma);
 
-extern void isa_init_dma(dma_t *dma);
+/*
+ * Add the ISA DMA controller.  Always takes channels 0-7.
+ */
+extern void isa_init_dma(void);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 39d949b63e8..58cf91f38e6 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -26,6 +26,7 @@ struct map_desc {
 #define MT_HIGH_VECTORS		8
 #define MT_MEMORY		9
 #define MT_ROM			10
+#define MT_MEMORY_NONCACHED	11
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 0202a7c20e6..85763db8744 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,14 +44,21 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
-#define MODULES_END		(PAGE_OFFSET)
-#define MODULES_VADDR		(MODULES_END - 16*1048576)
-
+#define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
 
 /*
+ * The highmem pkmap virtual space shares the end of the module area.
+ */
+#ifdef CONFIG_HIGHMEM
+#define MODULES_END		(PAGE_OFFSET - PMD_SIZE)
+#else
+#define MODULES_END		(PAGE_OFFSET)
+#endif
+
+/*
  * The XIP kernel gets mapped at the bottom of the module vm area.
  * Since we use sections to map it, this macro replaces the physical address
  * with its virtual address while keeping offset from the base section.
@@ -181,6 +188,7 @@ static inline void *phys_to_virt(unsigned long x)
 #ifndef __virt_to_bus
 #define __virt_to_bus	__virt_to_phys
 #define __bus_to_virt	__phys_to_virt
+#define __pfn_to_bus(x)	((x) << PAGE_SHIFT)
 #endif
 
 static inline __deprecated unsigned long virt_to_bus(void *x)
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 24b168dc31a..e4dfa69abb6 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -1,15 +1,27 @@
 #ifndef _ASM_ARM_MODULE_H
 #define _ASM_ARM_MODULE_H
 
-struct mod_arch_specific
-{
-	int foo;
-};
-
 #define Elf_Shdr	Elf32_Shdr
 #define Elf_Sym		Elf32_Sym
 #define Elf_Ehdr	Elf32_Ehdr
 
+struct unwind_table;
+
+struct mod_arch_specific
+{
+#ifdef CONFIG_ARM_UNWIND
+	Elf_Shdr *unw_sec_init;
+	Elf_Shdr *unw_sec_devinit;
+	Elf_Shdr *unw_sec_core;
+	Elf_Shdr *sec_init_text;
+	Elf_Shdr *sec_devinit_text;
+	Elf_Shdr *sec_core_text;
+	struct unwind_table *unwind_init;
+	struct unwind_table *unwind_devinit;
+	struct unwind_table *unwind_core;
+#endif
+};
+
 /*
  * Include the ARM architecture version.
  */
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index db80203b68e..c6250311550 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -185,6 +185,14 @@
 #   define CPU_NAME cpu_xsc3
 #  endif
 # endif
+# ifdef CONFIG_CPU_MOHAWK
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_mohawk
+#  endif
+# endif
 # ifdef CONFIG_CPU_FEROCEON
 #  ifdef CPU_NAME
 #   undef  MULTI_CPU
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 73192618f1c..236a06b9b7c 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -27,6 +27,8 @@
 /* PTRACE_SYSCALL is 24 */
 #define PTRACE_GETCRUNCHREGS	25
 #define PTRACE_SETCRUNCHREGS	26
+#define PTRACE_GETVFPREGS	27
+#define PTRACE_SETVFPREGS	28
 
 /*
  * PSR bits
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index 503843db156..c10d1aa4b48 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -43,6 +43,7 @@
 #define SZ_8M                           0x00800000
 #define SZ_16M                          0x01000000
 #define SZ_32M                          0x02000000
+#define SZ_48M                          0x03000000
 #define SZ_64M                          0x04000000
 #define SZ_128M                         0x08000000
 #define SZ_256M                         0x10000000
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
new file mode 100644
index 00000000000..4d0a16441b2
--- /dev/null
+++ b/arch/arm/include/asm/stacktrace.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long sp;
+	unsigned long lr;
+	unsigned long pc;
+};
+
+extern int unwind_frame(struct stackframe *frame);
+extern void walk_stackframe(struct stackframe *frame,
+			    int (*fn)(struct stackframe *, void *), void *data);
+
+#endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 811be55f338..0a0d49ae1e6 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -97,8 +97,8 @@ extern void __show_regs(struct pt_regs *);
 extern int cpu_architecture(void);
 extern void cpu_init(void);
 
-void arm_machine_restart(char mode);
-extern void (*arm_pm_restart)(char str);
+void arm_machine_restart(char mode, const char *cmd);
+extern void (*arm_pm_restart)(char str, const char *cmd);
 
 #define UDBG_UNDEFINED	(1 << 0)
 #define UDBG_SYSCALL	(1 << 1)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 68b9ec82a37..4f8848260ee 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -99,6 +99,8 @@ static inline struct thread_info *current_thread_info(void)
 
 #define thread_saved_pc(tsk)	\
 	((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
+#define thread_saved_sp(tsk)	\
+	((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
 #define thread_saved_fp(tsk)	\
 	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
 
@@ -113,6 +115,8 @@ extern void iwmmxt_task_restore(struct thread_info *, void *);
 extern void iwmmxt_task_release(struct thread_info *);
 extern void iwmmxt_task_switch(struct thread_info *);
 
+extern void vfp_sync_state(struct thread_info *thread);
+
 #endif
 
 /*
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index aa399aec568..491960bf426 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -25,5 +25,6 @@ static inline int in_exception_text(unsigned long ptr)
 }
 
 extern void __init early_trap_init(void);
+extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
 
 #endif
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
new file mode 100644
index 00000000000..a5edf421005
--- /dev/null
+++ b/arch/arm/include/asm/unwind.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/include/asm/unwind.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNWIND_H
+#define __ASM_UNWIND_H
+
+#ifndef __ASSEMBLY__
+
+/* Unwind reason code according the the ARM EABI documents */
+enum unwind_reason_code {
+	URC_OK = 0,			/* operation completed successfully */
+	URC_CONTINUE_UNWIND = 8,
+	URC_FAILURE = 9			/* unspecified failure of some kind */
+};
+
+struct unwind_idx {
+	unsigned long addr;
+	unsigned long insn;
+};
+
+struct unwind_table {
+	struct list_head list;
+	struct unwind_idx *start;
+	struct unwind_idx *stop;
+	unsigned long begin_addr;
+	unsigned long end_addr;
+};
+
+extern struct unwind_table *unwind_table_add(unsigned long start,
+					     unsigned long size,
+					     unsigned long text_addr,
+					     unsigned long text_size);
+extern void unwind_table_del(struct unwind_table *tab);
+extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
+
+#ifdef CONFIG_ARM_UNWIND
+extern int __init unwind_init(void);
+#else
+static inline int __init unwind_init(void)
+{
+	return 0;
+}
+#endif
+
+#endif	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_ARM_UNWIND
+#define UNWIND(code...)		code
+#else
+#define UNWIND(code...)
+#endif
+
+#endif	/* __ASM_UNWIND_H */
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
index 825c1e7c582..df95e050f9d 100644
--- a/arch/arm/include/asm/user.h
+++ b/arch/arm/include/asm/user.h
@@ -81,4 +81,13 @@ struct user{
 #define HOST_TEXT_START_ADDR (u.start_code)
 #define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
 
+/*
+ * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
+ * are ignored by the ptrace system call.
+ */
+struct user_vfp {
+	unsigned long long fpregs[32];
+	unsigned long fpscr;
+};
+
 #endif /* _ARM_USER_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 4305345987d..11a5197a221 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,12 +29,14 @@ obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
+obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
 
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
+obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index f53c5829054..b121b6053cc 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -49,6 +49,33 @@
 1002:
 		.endm
 
+#elif defined(CONFIG_CPU_XSCALE)
+
+		.macro	addruart, rx
+		.endm
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c8, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		beq	1001b
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x10000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		bne	1001b
+1002:
+		.endm
+
 #else
 
 		.macro	addruart, rx
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 4a3a50495c6..0e88e46fc73 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -24,11 +24,6 @@
 #include <asm/dma.h>
 #include <asm/mach/dma.h>
 
-#define ISA_DMA_MODE_READ	0x44
-#define ISA_DMA_MODE_WRITE	0x48
-#define ISA_DMA_MODE_CASCADE	0xc0
-#define ISA_DMA_AUTOINIT	0x10
-
 #define ISA_DMA_MASK		0
 #define ISA_DMA_MODE		1
 #define ISA_DMA_CLRFF		2
@@ -49,38 +44,35 @@ static unsigned int isa_dma_port[8][7] = {
 	{  0xd4,  0xd6,  0xd8,  0x48a,  0x08a,  0xcc, 0xce }
 };
 
-static int isa_get_dma_residue(dmach_t channel, dma_t *dma)
+static int isa_get_dma_residue(unsigned int chan, dma_t *dma)
 {
-	unsigned int io_port = isa_dma_port[channel][ISA_DMA_COUNT];
+	unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT];
 	int count;
 
 	count = 1 + inb(io_port);
 	count |= inb(io_port) << 8;
 
-	return channel < 4 ? count : (count << 1);
+	return chan < 4 ? count : (count << 1);
 }
 
-static void isa_enable_dma(dmach_t channel, dma_t *dma)
+static void isa_enable_dma(unsigned int chan, dma_t *dma)
 {
 	if (dma->invalid) {
 		unsigned long address, length;
 		unsigned int mode;
 		enum dma_data_direction direction;
 
-		mode = channel & 3;
+		mode = (chan & 3) | dma->dma_mode;
 		switch (dma->dma_mode & DMA_MODE_MASK) {
 		case DMA_MODE_READ:
-			mode |= ISA_DMA_MODE_READ;
 			direction = DMA_FROM_DEVICE;
 			break;
 
 		case DMA_MODE_WRITE:
-			mode |= ISA_DMA_MODE_WRITE;
 			direction = DMA_TO_DEVICE;
 			break;
 
 		case DMA_MODE_CASCADE:
-			mode |= ISA_DMA_MODE_CASCADE;
 			direction = DMA_BIDIRECTIONAL;
 			break;
 
@@ -105,34 +97,31 @@ static void isa_enable_dma(dmach_t channel, dma_t *dma)
 		address = dma->buf.dma_address;
 		length  = dma->buf.length - 1;
 
-		outb(address >> 16, isa_dma_port[channel][ISA_DMA_PGLO]);
-		outb(address >> 24, isa_dma_port[channel][ISA_DMA_PGHI]);
+		outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]);
+		outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]);
 
-		if (channel >= 4) {
+		if (chan >= 4) {
 			address >>= 1;
 			length >>= 1;
 		}
 
-		outb(0, isa_dma_port[channel][ISA_DMA_CLRFF]);
-
-		outb(address, isa_dma_port[channel][ISA_DMA_ADDR]);
-		outb(address >> 8, isa_dma_port[channel][ISA_DMA_ADDR]);
+		outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]);
 
-		outb(length, isa_dma_port[channel][ISA_DMA_COUNT]);
-		outb(length >> 8, isa_dma_port[channel][ISA_DMA_COUNT]);
+		outb(address, isa_dma_port[chan][ISA_DMA_ADDR]);
+		outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]);
 
-		if (dma->dma_mode & DMA_AUTOINIT)
-			mode |= ISA_DMA_AUTOINIT;
+		outb(length, isa_dma_port[chan][ISA_DMA_COUNT]);
+		outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]);
 
-		outb(mode, isa_dma_port[channel][ISA_DMA_MODE]);
+		outb(mode, isa_dma_port[chan][ISA_DMA_MODE]);
 		dma->invalid = 0;
 	}
-	outb(channel & 3, isa_dma_port[channel][ISA_DMA_MASK]);
+	outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]);
 }
 
-static void isa_disable_dma(dmach_t channel, dma_t *dma)
+static void isa_disable_dma(unsigned int chan, dma_t *dma)
 {
-	outb(channel | 4, isa_dma_port[channel][ISA_DMA_MASK]);
+	outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]);
 }
 
 static struct dma_ops isa_dma_ops = {
@@ -160,7 +149,12 @@ static struct resource dma_resources[] = { {
 	.end	= 0x048f
 } };
 
-void __init isa_init_dma(dma_t *dma)
+static dma_t isa_dma[8];
+
+/*
+ * ISA DMA always starts at channel 0
+ */
+void __init isa_init_dma(void)
 {
 	/*
 	 * Try to autodetect presence of an ISA DMA controller.
@@ -178,11 +172,11 @@ void __init isa_init_dma(dma_t *dma)
 	outb(0xaa, 0x00);
 
 	if (inb(0) == 0x55 && inb(0) == 0xaa) {
-		int channel, i;
+		unsigned int chan, i;
 
-		for (channel = 0; channel < 8; channel++) {
-			dma[channel].d_ops = &isa_dma_ops;
-			isa_disable_dma(channel, NULL);
+		for (chan = 0; chan < 8; chan++) {
+			isa_dma[chan].d_ops = &isa_dma_ops;
+			isa_disable_dma(chan, NULL);
 		}
 
 		outb(0x40, 0x0b);
@@ -217,5 +211,12 @@ void __init isa_init_dma(dma_t *dma)
 
 		for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
 			request_resource(&ioport_resource, dma_resources + i);
+
+		for (chan = 0; chan < 8; chan++) {
+			int ret = isa_dma_add(chan, &isa_dma[chan]);
+			if (ret)
+				printk(KERN_ERR "ISADMA%u: unable to register: %d\n",
+					chan, ret);
+		}
 	}
 }
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index d006085ed7e..7d5b9fb01e7 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
+#include <linux/scatterlist.h>
 
 #include <asm/dma.h>
 
@@ -23,19 +24,40 @@
 DEFINE_SPINLOCK(dma_spin_lock);
 EXPORT_SYMBOL(dma_spin_lock);
 
-static dma_t dma_chan[MAX_DMA_CHANNELS];
+static dma_t *dma_chan[MAX_DMA_CHANNELS];
+
+static inline dma_t *dma_channel(unsigned int chan)
+{
+	if (chan >= MAX_DMA_CHANNELS)
+		return NULL;
+
+	return dma_chan[chan];
+}
+
+int __init isa_dma_add(unsigned int chan, dma_t *dma)
+{
+	if (!dma->d_ops)
+		return -EINVAL;
+
+	sg_init_table(&dma->buf, 1);
+
+	if (dma_chan[chan])
+		return -EBUSY;
+	dma_chan[chan] = dma;
+	return 0;
+}
 
 /*
  * Request DMA channel
  *
  * On certain platforms, we have to allocate an interrupt as well...
  */
-int request_dma(dmach_t channel, const char *device_id)
+int request_dma(unsigned int chan, const char *device_id)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 	int ret;
 
-	if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+	if (!dma)
 		goto bad_dma;
 
 	if (xchg(&dma->lock, 1) != 0)
@@ -47,7 +69,7 @@ int request_dma(dmach_t channel, const char *device_id)
 
 	ret = 0;
 	if (dma->d_ops->request)
-		ret = dma->d_ops->request(channel, dma);
+		ret = dma->d_ops->request(chan, dma);
 
 	if (ret)
 		xchg(&dma->lock, 0);
@@ -55,7 +77,7 @@ int request_dma(dmach_t channel, const char *device_id)
 	return ret;
 
 bad_dma:
-	printk(KERN_ERR "dma: trying to allocate DMA%d\n", channel);
+	printk(KERN_ERR "dma: trying to allocate DMA%d\n", chan);
 	return -EINVAL;
 
 busy:
@@ -68,42 +90,42 @@ EXPORT_SYMBOL(request_dma);
  *
  * On certain platforms, we have to free interrupt as well...
  */
-void free_dma(dmach_t channel)
+void free_dma(unsigned int chan)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 
-	if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+	if (!dma)
 		goto bad_dma;
 
 	if (dma->active) {
-		printk(KERN_ERR "dma%d: freeing active DMA\n", channel);
-		dma->d_ops->disable(channel, dma);
+		printk(KERN_ERR "dma%d: freeing active DMA\n", chan);
+		dma->d_ops->disable(chan, dma);
 		dma->active = 0;
 	}
 
 	if (xchg(&dma->lock, 0) != 0) {
 		if (dma->d_ops->free)
-			dma->d_ops->free(channel, dma);
+			dma->d_ops->free(chan, dma);
 		return;
 	}
 
-	printk(KERN_ERR "dma%d: trying to free free DMA\n", channel);
+	printk(KERN_ERR "dma%d: trying to free free DMA\n", chan);
 	return;
 
 bad_dma:
-	printk(KERN_ERR "dma: trying to free DMA%d\n", channel);
+	printk(KERN_ERR "dma: trying to free DMA%d\n", chan);
 }
 EXPORT_SYMBOL(free_dma);
 
 /* Set DMA Scatter-Gather list
  */
-void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg)
+void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA SG while "
-		       "DMA active\n", channel);
+		       "DMA active\n", chan);
 
 	dma->sg = sg;
 	dma->sgcount = nr_sg;
@@ -115,13 +137,13 @@ EXPORT_SYMBOL(set_dma_sg);
  *
  * Copy address to the structure, and set the invalid bit
  */
-void __set_dma_addr (dmach_t channel, void *addr)
+void __set_dma_addr (unsigned int chan, void *addr)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA address while "
-		       "DMA active\n", channel);
+		       "DMA active\n", chan);
 
 	dma->sg = NULL;
 	dma->addr = addr;
@@ -133,13 +155,13 @@ EXPORT_SYMBOL(__set_dma_addr);
  *
  * Copy address to the structure, and set the invalid bit
  */
-void set_dma_count (dmach_t channel, unsigned long count)
+void set_dma_count (unsigned int chan, unsigned long count)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA count while "
-		       "DMA active\n", channel);
+		       "DMA active\n", chan);
 
 	dma->sg = NULL;
 	dma->count = count;
@@ -149,13 +171,13 @@ EXPORT_SYMBOL(set_dma_count);
 
 /* Set DMA direction mode
  */
-void set_dma_mode (dmach_t channel, dmamode_t mode)
+void set_dma_mode (unsigned int chan, unsigned int mode)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA mode while "
-		       "DMA active\n", channel);
+		       "DMA active\n", chan);
 
 	dma->dma_mode = mode;
 	dma->invalid = 1;
@@ -164,42 +186,42 @@ EXPORT_SYMBOL(set_dma_mode);
 
 /* Enable DMA channel
  */
-void enable_dma (dmach_t channel)
+void enable_dma (unsigned int chan)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 
 	if (!dma->lock)
 		goto free_dma;
 
 	if (dma->active == 0) {
 		dma->active = 1;
-		dma->d_ops->enable(channel, dma);
+		dma->d_ops->enable(chan, dma);
 	}
 	return;
 
 free_dma:
-	printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel);
+	printk(KERN_ERR "dma%d: trying to enable free DMA\n", chan);
 	BUG();
 }
 EXPORT_SYMBOL(enable_dma);
 
 /* Disable DMA channel
  */
-void disable_dma (dmach_t channel)
+void disable_dma (unsigned int chan)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 
 	if (!dma->lock)
 		goto free_dma;
 
 	if (dma->active == 1) {
 		dma->active = 0;
-		dma->d_ops->disable(channel, dma);
+		dma->d_ops->disable(chan, dma);
 	}
 	return;
 
 free_dma:
-	printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel);
+	printk(KERN_ERR "dma%d: trying to disable free DMA\n", chan);
 	BUG();
 }
 EXPORT_SYMBOL(disable_dma);
@@ -207,45 +229,38 @@ EXPORT_SYMBOL(disable_dma);
 /*
  * Is the specified DMA channel active?
  */
-int dma_channel_active(dmach_t channel)
+int dma_channel_active(unsigned int chan)
 {
-	return dma_chan[channel].active;
+	dma_t *dma = dma_channel(chan);
+	return dma->active;
 }
 EXPORT_SYMBOL(dma_channel_active);
 
-void set_dma_page(dmach_t channel, char pagenr)
+void set_dma_page(unsigned int chan, char pagenr)
 {
-	printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel);
+	printk(KERN_ERR "dma%d: trying to set_dma_page\n", chan);
 }
 EXPORT_SYMBOL(set_dma_page);
 
-void set_dma_speed(dmach_t channel, int cycle_ns)
+void set_dma_speed(unsigned int chan, int cycle_ns)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 	int ret = 0;
 
 	if (dma->d_ops->setspeed)
-		ret = dma->d_ops->setspeed(channel, dma, cycle_ns);
+		ret = dma->d_ops->setspeed(chan, dma, cycle_ns);
 	dma->speed = ret;
 }
 EXPORT_SYMBOL(set_dma_speed);
 
-int get_dma_residue(dmach_t channel)
+int get_dma_residue(unsigned int chan)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_channel(chan);
 	int ret = 0;
 
 	if (dma->d_ops->residue)
-		ret = dma->d_ops->residue(channel, dma);
+		ret = dma->d_ops->residue(chan, dma);
 
 	return ret;
 }
 EXPORT_SYMBOL(get_dma_residue);
-
-static int __init init_dma(void)
-{
-	arch_dma_init(dma_chan);
-	return 0;
-}
-
-core_initcall(init_dma);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 85040cfeb5e..d662a2f1fd8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -20,6 +20,7 @@
 #include <asm/vfpmacros.h>
 #include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
+#include <asm/unwind.h>
 
 #include "entry-header.S"
 
@@ -123,6 +124,8 @@ ENDPROC(__und_invalid)
 #endif
 
 	.macro	svc_entry, stack_hole=0
+ UNWIND(.fnstart		)
+ UNWIND(.save {r0 - pc}		)
 	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole)
  SPFIX(	tst	sp, #4		)
  SPFIX(	bicne	sp, sp, #4	)
@@ -196,6 +199,7 @@ __dabt_svc:
 	ldr	r0, [sp, #S_PSR]
 	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
 
 	.align	5
@@ -228,6 +232,7 @@ __irq_svc:
 	bleq	trace_hardirqs_on
 #endif
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
 	.ltorg
@@ -278,6 +283,7 @@ __und_svc:
 	ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
 	msr	spsr_cxsf, lr
 	ldmia	sp, {r0 - pc}^			@ Restore SVC registers
+ UNWIND(.fnend		)
 ENDPROC(__und_svc)
 
 	.align	5
@@ -320,6 +326,7 @@ __pabt_svc:
 	ldr	r0, [sp, #S_PSR]
 	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
 
 	.align	5
@@ -343,6 +350,8 @@ ENDPROC(__pabt_svc)
 #endif
 
 	.macro	usr_entry
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)	@ don't unwind the user space
 	sub	sp, sp, #S_FRAME_SIZE
 	stmib	sp, {r1 - r12}
 
@@ -420,6 +429,7 @@ __dabt_usr:
 	mov	r2, sp
 	adr	lr, ret_from_exception
 	b	do_DataAbort
+ UNWIND(.fnend		)
 ENDPROC(__dabt_usr)
 
 	.align	5
@@ -450,6 +460,7 @@ __irq_usr:
 
 	mov	why, #0
 	b	ret_to_user
+ UNWIND(.fnend		)
 ENDPROC(__irq_usr)
 
 	.ltorg
@@ -484,6 +495,7 @@ __und_usr:
 #else
 	b	__und_usr_unknown
 #endif
+ UNWIND(.fnend		)
 ENDPROC(__und_usr)
 
 	@
@@ -671,14 +683,18 @@ __pabt_usr:
 	enable_irq				@ Enable interrupts
 	mov	r1, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
+ UNWIND(.fnend		)
 	/* fall through */
 /*
  * This is the return code to user mode for abort handlers
  */
 ENTRY(ret_from_exception)
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)
 	get_thread_info tsk
 	mov	why, #0
 	b	ret_to_user
+ UNWIND(.fnend		)
 ENDPROC(__pabt_usr)
 ENDPROC(ret_from_exception)
 
@@ -688,6 +704,8 @@ ENDPROC(ret_from_exception)
  * previous and next are guaranteed not to be the same.
  */
 ENTRY(__switch_to)
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)
 	add	ip, r1, #TI_CPU_SAVE
 	ldr	r3, [r2, #TI_TP_VALUE]
 	stmia	ip!, {r4 - sl, fp, sp, lr}	@ Store most regs on stack
@@ -717,6 +735,7 @@ ENTRY(__switch_to)
 	bl	atomic_notifier_call_chain
 	mov	r0, r5
 	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+ UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
 	__INIT
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 49a6ba926c2..b55cb033180 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -11,6 +11,7 @@
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
 #include <mach/entry-macro.S>
+#include <asm/unwind.h>
 
 #include "entry-header.S"
 
@@ -22,6 +23,8 @@
  * stack.
  */
 ret_fast_syscall:
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)
 	disable_irq				@ disable interrupts
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
@@ -38,6 +41,7 @@ ret_fast_syscall:
 	mov	r0, r0
 	add	sp, sp, #S_FRAME_SIZE - S_PC
 	movs	pc, lr				@ return & move spsr_svc into cpsr
+ UNWIND(.fnend		)
 
 /*
  * Ok, we need to do extra processing, enter the slow path.
@@ -111,6 +115,7 @@ ENTRY(mcount)
 	.globl mcount_call
 mcount_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 ENTRY(ftrace_caller)
@@ -122,6 +127,7 @@ ENTRY(ftrace_caller)
 	.globl ftrace_call
 ftrace_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #else
@@ -133,6 +139,7 @@ ENTRY(mcount)
 	adr r0, ftrace_stub
 	cmp r0, r2
 	bne trace
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 trace:
@@ -141,6 +148,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
+	mov lr, r1				@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 36f81d96797..6ff7919613d 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -88,7 +88,7 @@ void set_fiq_handler(void *start, unsigned int length)
  * disable irqs for the duration.  Note - these functions are almost
  * entirely coded in assembly.
  */
-void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+void __naked set_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (
@@ -106,7 +106,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }
 
-void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+void __naked get_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index dab48f27263..13dbd5bf5cc 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -22,6 +22,7 @@
 
 #include <asm/pgtable.h>
 #include <asm/sections.h>
+#include <asm/unwind.h>
 
 #ifdef CONFIG_XIP_KERNEL
 /*
@@ -66,6 +67,24 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 			      char *secstrings,
 			      struct module *mod)
 {
+#ifdef CONFIG_ARM_UNWIND
+	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+
+	for (s = sechdrs; s < sechdrs_end; s++) {
+		if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0)
+			mod->arch.unw_sec_init = s;
+		else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0)
+			mod->arch.unw_sec_devinit = s;
+		else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0)
+			mod->arch.unw_sec_core = s;
+		else if (strcmp(".init.text", secstrings + s->sh_name) == 0)
+			mod->arch.sec_init_text = s;
+		else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0)
+			mod->arch.sec_devinit_text = s;
+		else if (strcmp(".text", secstrings + s->sh_name) == 0)
+			mod->arch.sec_core_text = s;
+	}
+#endif
 	return 0;
 }
 
@@ -104,6 +123,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		loc = dstsec->sh_addr + rel->r_offset;
 
 		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_ARM_NONE:
+			/* ignore */
+			break;
+
 		case R_ARM_ABS32:
 			*(u32 *)loc += sym->st_value;
 			break;
@@ -132,6 +155,11 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc |= offset & 0x00ffffff;
 			break;
 
+		case R_ARM_PREL31:
+			offset = *(u32 *)loc + sym->st_value - loc;
+			*(u32 *)loc = offset & 0x7fffffff;
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));
@@ -150,14 +178,50 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 	return -ENOEXEC;
 }
 
+#ifdef CONFIG_ARM_UNWIND
+static void register_unwind_tables(struct module *mod)
+{
+	if (mod->arch.unw_sec_init && mod->arch.sec_init_text)
+		mod->arch.unwind_init =
+			unwind_table_add(mod->arch.unw_sec_init->sh_addr,
+					 mod->arch.unw_sec_init->sh_size,
+					 mod->arch.sec_init_text->sh_addr,
+					 mod->arch.sec_init_text->sh_size);
+	if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text)
+		mod->arch.unwind_devinit =
+			unwind_table_add(mod->arch.unw_sec_devinit->sh_addr,
+					 mod->arch.unw_sec_devinit->sh_size,
+					 mod->arch.sec_devinit_text->sh_addr,
+					 mod->arch.sec_devinit_text->sh_size);
+	if (mod->arch.unw_sec_core && mod->arch.sec_core_text)
+		mod->arch.unwind_core =
+			unwind_table_add(mod->arch.unw_sec_core->sh_addr,
+					 mod->arch.unw_sec_core->sh_size,
+					 mod->arch.sec_core_text->sh_addr,
+					 mod->arch.sec_core_text->sh_size);
+}
+
+static void unregister_unwind_tables(struct module *mod)
+{
+	unwind_table_del(mod->arch.unwind_init);
+	unwind_table_del(mod->arch.unwind_devinit);
+	unwind_table_del(mod->arch.unwind_core);
+}
+#else
+static inline void register_unwind_tables(struct module *mod) { }
+static inline void unregister_unwind_tables(struct module *mod) { }
+#endif
+
 int
 module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 		struct module *module)
 {
+	register_unwind_tables(module);
 	return 0;
 }
 
 void
 module_arch_cleanup(struct module *mod)
 {
+	unregister_unwind_tables(mod);
 }
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d3ea6fa8952..2de14e2afdc 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -34,6 +34,7 @@
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/thread_notify.h>
+#include <asm/stacktrace.h>
 #include <asm/mach/time.h>
 
 static const char *processor_modes[] = {
@@ -82,7 +83,7 @@ static int __init hlt_setup(char *__unused)
 __setup("nohlt", nohlt_setup);
 __setup("hlt", hlt_setup);
 
-void arm_machine_restart(char mode)
+void arm_machine_restart(char mode, const char *cmd)
 {
 	/*
 	 * Clean and disable cache, and turn off interrupts
@@ -99,7 +100,7 @@ void arm_machine_restart(char mode)
 	/*
 	 * Now call the architecture specific reboot code.
 	 */
-	arch_reset(mode);
+	arch_reset(mode, cmd);
 
 	/*
 	 * Whoops - the architecture was unable to reboot.
@@ -119,7 +120,7 @@ EXPORT_SYMBOL(pm_idle);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void (*arm_pm_restart)(char str) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
 EXPORT_SYMBOL_GPL(arm_pm_restart);
 
 
@@ -194,9 +195,9 @@ void machine_power_off(void)
 		pm_power_off();
 }
 
-void machine_restart(char * __unused)
+void machine_restart(char *cmd)
 {
-	arm_pm_restart(reboot_mode);
+	arm_pm_restart(reboot_mode, cmd);
 }
 
 void __show_regs(struct pt_regs *regs)
@@ -372,23 +373,21 @@ EXPORT_SYMBOL(kernel_thread);
 
 unsigned long get_wchan(struct task_struct *p)
 {
-	unsigned long fp, lr;
-	unsigned long stack_start, stack_end;
+	struct stackframe frame;
 	int count = 0;
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
 
-	stack_start = (unsigned long)end_of_stack(p);
-	stack_end = (unsigned long)task_stack_page(p) + THREAD_SIZE;
-
-	fp = thread_saved_fp(p);
+	frame.fp = thread_saved_fp(p);
+	frame.sp = thread_saved_sp(p);
+	frame.lr = 0;			/* recovered from the stack */
+	frame.pc = thread_saved_pc(p);
 	do {
-		if (fp < stack_start || fp > stack_end)
+		int ret = unwind_frame(&frame);
+		if (ret < 0)
 			return 0;
-		lr = ((unsigned long *)fp)[-1];
-		if (!in_sched_functions(lr))
-			return lr;
-		fp = *(unsigned long *) (fp - 12);
+		if (!in_sched_functions(frame.pc))
+			return frame.pc;
 	} while (count ++ < 16);
 	return 0;
 }
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index df653ea5925..89882a1d018 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -653,6 +653,54 @@ static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp)
 }
 #endif
 
+#ifdef CONFIG_VFP
+/*
+ * Get the child VFP state.
+ */
+static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
+{
+	struct thread_info *thread = task_thread_info(tsk);
+	union vfp_state *vfp = &thread->vfpstate;
+	struct user_vfp __user *ufp = data;
+
+	vfp_sync_state(thread);
+
+	/* copy the floating point registers */
+	if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
+			 sizeof(vfp->hard.fpregs)))
+		return -EFAULT;
+
+	/* copy the status and control register */
+	if (put_user(vfp->hard.fpscr, &ufp->fpscr))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Set the child VFP state.
+ */
+static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
+{
+	struct thread_info *thread = task_thread_info(tsk);
+	union vfp_state *vfp = &thread->vfpstate;
+	struct user_vfp __user *ufp = data;
+
+	vfp_sync_state(thread);
+
+	/* copy the floating point registers */
+	if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
+			   sizeof(vfp->hard.fpregs)))
+		return -EFAULT;
+
+	/* copy the status and control register */
+	if (get_user(vfp->hard.fpscr, &ufp->fpscr))
+		return -EFAULT;
+
+	return 0;
+}
+#endif
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
@@ -775,6 +823,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 #endif
 
+#ifdef CONFIG_VFP
+		case PTRACE_GETVFPREGS:
+			ret = ptrace_getvfpregs(child, (void __user *)data);
+			break;
+
+		case PTRACE_SETVFPREGS:
+			ret = ptrace_setvfpregs(child, (void __user *)data);
+			break;
+#endif
+
 		default:
 			ret = ptrace_request(child, request, addr, data);
 			break;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 68d6494c038..bc5e4128f9f 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -40,6 +40,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/traps.h>
+#include <asm/unwind.h>
 
 #include "compat.h"
 #include "atags.h"
@@ -685,6 +686,8 @@ void __init setup_arch(char **cmdline_p)
 	struct machine_desc *mdesc;
 	char *from = default_command_line;
 
+	unwind_init();
+
 	setup_processor();
 	mdesc = setup_machine(machine_arch_type);
 	machine_name = mdesc->name;
@@ -780,6 +783,8 @@ static const char *hwcap_str[] = {
 	"crunch",
 	"thumbee",
 	"neon",
+	"vfpv3",
+	"vfpv3d16",
 	NULL
 };
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 55fa7ff96a3..7801aac3c04 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -93,6 +93,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
 	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
 		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+	flush_pmd_entry(pmd);
 
 	/*
 	 * We need to tell the secondary core where to find
@@ -130,6 +131,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.pgdir = 0;
 
 	*pmd = __pmd(0);
+	clean_pmd_entry(pmd);
 	pgd_free(&init_mm, pgd);
 
 	if (ret) {
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index fc650f64df4..9f444e5cc16 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -2,35 +2,60 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 
-#include "stacktrace.h"
-
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
-		    int (*fn)(struct stackframe *, void *), void *data)
+#include <asm/stacktrace.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * Unwind the current stack frame and store the new register values in the
+ * structure passed as argument. Unwinding is equivalent to a function return,
+ * hence the new PC value rather than LR should be used for backtrace.
+ *
+ * With framepointer enabled, a simple function prologue looks like this:
+ *	mov	ip, sp
+ *	stmdb	sp!, {fp, ip, lr, pc}
+ *	sub	fp, ip, #4
+ *
+ * A simple function epilogue looks like this:
+ *	ldm	sp, {fp, sp, pc}
+ *
+ * Note that with framepointer enabled, even the leaf functions have the same
+ * prologue and epilogue, therefore we can ignore the LR value in this case.
+ */
+int unwind_frame(struct stackframe *frame)
 {
-	struct stackframe *frame;
-
-	do {
-		/*
-		 * Check current frame pointer is within bounds
-		 */
-		if (fp < (low + 12) || fp + 4 >= high)
-			break;
+	unsigned long high, low;
+	unsigned long fp = frame->fp;
 
-		frame = (struct stackframe *)(fp - 12);
+	/* only go to a higher address on the stack */
+	low = frame->sp;
+	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
 
-		if (fn(frame, data))
-			break;
+	/* check current frame pointer is within bounds */
+	if (fp < (low + 12) || fp + 4 >= high)
+		return -EINVAL;
 
-		/*
-		 * Update the low bound - the next frame must always
-		 * be at a higher address than the current frame.
-		 */
-		low = fp + 4;
-		fp = frame->fp;
-	} while (fp);
+	/* restore the registers from the stack frame */
+	frame->fp = *(unsigned long *)(fp - 12);
+	frame->sp = *(unsigned long *)(fp - 8);
+	frame->pc = *(unsigned long *)(fp - 4);
 
 	return 0;
 }
+#endif
+
+void walk_stackframe(struct stackframe *frame,
+		     int (*fn)(struct stackframe *, void *), void *data)
+{
+	while (1) {
+		int ret;
+
+		if (fn(frame, data))
+			break;
+		ret = unwind_frame(frame);
+		if (ret < 0)
+			break;
+	}
+}
 EXPORT_SYMBOL(walk_stackframe);
 
 #ifdef CONFIG_STACKTRACE
@@ -44,7 +69,7 @@ static int save_trace(struct stackframe *frame, void *d)
 {
 	struct stack_trace_data *data = d;
 	struct stack_trace *trace = data->trace;
-	unsigned long addr = frame->lr;
+	unsigned long addr = frame->pc;
 
 	if (data->no_sched_functions && in_sched_functions(addr))
 		return 0;
@@ -61,11 +86,10 @@ static int save_trace(struct stackframe *frame, void *d)
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	struct stack_trace_data data;
-	unsigned long fp, base;
+	struct stackframe frame;
 
 	data.trace = trace;
 	data.skip = trace->skip;
-	base = (unsigned long)task_stack_page(tsk);
 
 	if (tsk != current) {
 #ifdef CONFIG_SMP
@@ -76,14 +100,22 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 		BUG();
 #else
 		data.no_sched_functions = 1;
-		fp = thread_saved_fp(tsk);
+		frame.fp = thread_saved_fp(tsk);
+		frame.sp = thread_saved_sp(tsk);
+		frame.lr = 0;		/* recovered from the stack */
+		frame.pc = thread_saved_pc(tsk);
 #endif
 	} else {
+		register unsigned long current_sp asm ("sp");
+
 		data.no_sched_functions = 0;
-		asm("mov %0, fp" : "=r" (fp));
+		frame.fp = (unsigned long)__builtin_frame_address(0);
+		frame.sp = current_sp;
+		frame.lr = (unsigned long)__builtin_return_address(0);
+		frame.pc = (unsigned long)save_stack_trace_tsk;
 	}
 
-	walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+	walk_stackframe(&frame, save_trace, &data);
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
diff --git a/arch/arm/kernel/stacktrace.h b/arch/arm/kernel/stacktrace.h
deleted file mode 100644
index e9fd20cb566..00000000000
--- a/arch/arm/kernel/stacktrace.h
+++ /dev/null
@@ -1,9 +0,0 @@
-struct stackframe {
-	unsigned long fp;
-	unsigned long sp;
-	unsigned long lr;
-	unsigned long pc;
-};
-
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
-		    int (*fn)(struct stackframe *, void *), void *data);
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index c68b44aa88d..4cdc4a0bd02 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -33,6 +33,7 @@
 
 #include <asm/leds.h>
 #include <asm/thread_info.h>
+#include <asm/stacktrace.h>
 #include <asm/mach/time.h>
 
 /*
@@ -55,14 +56,22 @@ EXPORT_SYMBOL(rtc_lock);
 #ifdef CONFIG_SMP
 unsigned long profile_pc(struct pt_regs *regs)
 {
-	unsigned long fp, pc = instruction_pointer(regs);
+	struct stackframe frame;
 
-	if (in_lock_functions(pc)) {
-		fp = regs->ARM_fp;
-		pc = ((unsigned long *)fp)[-1];
-	}
+	if (!in_lock_functions(regs->ARM_pc))
+		return regs->ARM_pc;
+
+	frame.fp = regs->ARM_fp;
+	frame.sp = regs->ARM_sp;
+	frame.lr = regs->ARM_lr;
+	frame.pc = regs->ARM_pc;
+	do {
+		int ret = unwind_frame(&frame);
+		if (ret < 0)
+			return 0;
+	} while (in_lock_functions(frame.pc));
 
-	return pc;
+	return frame.pc;
 }
 EXPORT_SYMBOL(profile_pc);
 #endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 79abc4ddc0c..57eb0f6f600 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -27,6 +27,7 @@
 #include <asm/system.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
+#include <asm/unwind.h>
 
 #include "ptrace.h"
 #include "signal.h"
@@ -61,6 +62,7 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
+#ifndef CONFIG_ARM_UNWIND
 /*
  * Stack pointers should always be within the kernels view of
  * physical memory.  If it is not there, then we can't dump
@@ -74,6 +76,7 @@ static int verify_stack(unsigned long sp)
 
 	return 0;
 }
+#endif
 
 /*
  * Dump out the contents of some memory nicely...
@@ -150,13 +153,33 @@ static void dump_instr(struct pt_regs *regs)
 	set_fs(fs);
 }
 
+#ifdef CONFIG_ARM_UNWIND
+static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+	unwind_backtrace(regs, tsk);
+}
+#else
 static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 {
-	unsigned int fp;
+	unsigned int fp, mode;
 	int ok = 1;
 
 	printk("Backtrace: ");
-	fp = regs->ARM_fp;
+
+	if (!tsk)
+		tsk = current;
+
+	if (regs) {
+		fp = regs->ARM_fp;
+		mode = processor_mode(regs);
+	} else if (tsk != current) {
+		fp = thread_saved_fp(tsk);
+		mode = 0x10;
+	} else {
+		asm("mov %0, fp" : "=r" (fp) : : "cc");
+		mode = 0x10;
+	}
+
 	if (!fp) {
 		printk("no frame pointer");
 		ok = 0;
@@ -168,29 +191,20 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 	printk("\n");
 
 	if (ok)
-		c_backtrace(fp, processor_mode(regs));
+		c_backtrace(fp, mode);
 }
+#endif
 
 void dump_stack(void)
 {
-	__backtrace();
+	dump_backtrace(NULL, NULL);
 }
 
 EXPORT_SYMBOL(dump_stack);
 
 void show_stack(struct task_struct *tsk, unsigned long *sp)
 {
-	unsigned long fp;
-
-	if (!tsk)
-		tsk = current;
-
-	if (tsk != current)
-		fp = thread_saved_fp(tsk);
-	else
-		asm("mov %0, fp" : "=r" (fp) : : "cc");
-
-	c_backtrace(fp, 0x10);
+	dump_backtrace(NULL, tsk);
 	barrier();
 }
 
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
new file mode 100644
index 00000000000..1dedc2c7ff4
--- /dev/null
+++ b/arch/arm/kernel/unwind.c
@@ -0,0 +1,434 @@
+/*
+ * arch/arm/kernel/unwind.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Stack unwinding support for ARM
+ *
+ * An ARM EABI version of gcc is required to generate the unwind
+ * tables. For information about the structure of the unwind tables,
+ * see "Exception Handling ABI for the ARM Architecture" at:
+ *
+ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#include <asm/stacktrace.h>
+#include <asm/traps.h>
+#include <asm/unwind.h>
+
+/* Dummy functions to avoid linker complaints */
+void __aeabi_unwind_cpp_pr0(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr0);
+
+void __aeabi_unwind_cpp_pr1(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr1);
+
+void __aeabi_unwind_cpp_pr2(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
+
+struct unwind_ctrl_block {
+	unsigned long vrs[16];		/* virtual register set */
+	unsigned long *insn;		/* pointer to the current instructions word */
+	int entries;			/* number of entries left to interpret */
+	int byte;			/* current byte number in the instructions word */
+};
+
+enum regs {
+	FP = 11,
+	SP = 13,
+	LR = 14,
+	PC = 15
+};
+
+extern struct unwind_idx __start_unwind_idx[];
+extern struct unwind_idx __stop_unwind_idx[];
+
+static DEFINE_SPINLOCK(unwind_lock);
+static LIST_HEAD(unwind_tables);
+
+/* Convert a prel31 symbol to an absolute address */
+#define prel31_to_addr(ptr)				\
+({							\
+	/* sign-extend to 32 bits */			\
+	long offset = (((long)*(ptr)) << 1) >> 1;	\
+	(unsigned long)(ptr) + offset;			\
+})
+
+/*
+ * Binary search in the unwind index. The entries entries are
+ * guaranteed to be sorted in ascending order by the linker.
+ */
+static struct unwind_idx *search_index(unsigned long addr,
+				       struct unwind_idx *first,
+				       struct unwind_idx *last)
+{
+	pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+
+	if (addr < first->addr) {
+		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
+		return NULL;
+	} else if (addr >= last->addr)
+		return last;
+
+	while (first < last - 1) {
+		struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+
+		if (addr < mid->addr)
+			last = mid;
+		else
+			first = mid;
+	}
+
+	return first;
+}
+
+static struct unwind_idx *unwind_find_idx(unsigned long addr)
+{
+	struct unwind_idx *idx = NULL;
+	unsigned long flags;
+
+	pr_debug("%s(%08lx)\n", __func__, addr);
+
+	if (core_kernel_text(addr))
+		/* main unwind table */
+		idx = search_index(addr, __start_unwind_idx,
+				   __stop_unwind_idx - 1);
+	else {
+		/* module unwind tables */
+		struct unwind_table *table;
+
+		spin_lock_irqsave(&unwind_lock, flags);
+		list_for_each_entry(table, &unwind_tables, list) {
+			if (addr >= table->begin_addr &&
+			    addr < table->end_addr) {
+				idx = search_index(addr, table->start,
+						   table->stop - 1);
+				break;
+			}
+		}
+		spin_unlock_irqrestore(&unwind_lock, flags);
+	}
+
+	pr_debug("%s: idx = %p\n", __func__, idx);
+	return idx;
+}
+
+static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long ret;
+
+	if (ctrl->entries <= 0) {
+		pr_warning("unwind: Corrupt unwind table\n");
+		return 0;
+	}
+
+	ret = (*ctrl->insn >> (ctrl->byte * 8)) & 0xff;
+
+	if (ctrl->byte == 0) {
+		ctrl->insn++;
+		ctrl->entries--;
+		ctrl->byte = 3;
+	} else
+		ctrl->byte--;
+
+	return ret;
+}
+
+/*
+ * Execute the current unwind instruction.
+ */
+static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long insn = unwind_get_byte(ctrl);
+
+	pr_debug("%s: insn = %08lx\n", __func__, insn);
+
+	if ((insn & 0xc0) == 0x00)
+		ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
+	else if ((insn & 0xc0) == 0x40)
+		ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
+	else if ((insn & 0xf0) == 0x80) {
+		unsigned long mask;
+		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+		int load_sp, reg = 4;
+
+		insn = (insn << 8) | unwind_get_byte(ctrl);
+		mask = insn & 0x0fff;
+		if (mask == 0) {
+			pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n",
+				   insn);
+			return -URC_FAILURE;
+		}
+
+		/* pop R4-R15 according to mask */
+		load_sp = mask & (1 << (13 - 4));
+		while (mask) {
+			if (mask & 1)
+				ctrl->vrs[reg] = *vsp++;
+			mask >>= 1;
+			reg++;
+		}
+		if (!load_sp)
+			ctrl->vrs[SP] = (unsigned long)vsp;
+	} else if ((insn & 0xf0) == 0x90 &&
+		   (insn & 0x0d) != 0x0d)
+		ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
+	else if ((insn & 0xf0) == 0xa0) {
+		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+		int reg;
+
+		/* pop R4-R[4+bbb] */
+		for (reg = 4; reg <= 4 + (insn & 7); reg++)
+			ctrl->vrs[reg] = *vsp++;
+		if (insn & 0x80)
+			ctrl->vrs[14] = *vsp++;
+		ctrl->vrs[SP] = (unsigned long)vsp;
+	} else if (insn == 0xb0) {
+		ctrl->vrs[PC] = ctrl->vrs[LR];
+		/* no further processing */
+		ctrl->entries = 0;
+	} else if (insn == 0xb1) {
+		unsigned long mask = unwind_get_byte(ctrl);
+		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+		int reg = 0;
+
+		if (mask == 0 || mask & 0xf0) {
+			pr_warning("unwind: Spare encoding %04lx\n",
+			       (insn << 8) | mask);
+			return -URC_FAILURE;
+		}
+
+		/* pop R0-R3 according to mask */
+		while (mask) {
+			if (mask & 1)
+				ctrl->vrs[reg] = *vsp++;
+			mask >>= 1;
+			reg++;
+		}
+		ctrl->vrs[SP] = (unsigned long)vsp;
+	} else if (insn == 0xb2) {
+		unsigned long uleb128 = unwind_get_byte(ctrl);
+
+		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
+	} else {
+		pr_warning("unwind: Unhandled instruction %02lx\n", insn);
+		return -URC_FAILURE;
+	}
+
+	pr_debug("%s: fp = %08lx sp = %08lx lr = %08lx pc = %08lx\n", __func__,
+		 ctrl->vrs[FP], ctrl->vrs[SP], ctrl->vrs[LR], ctrl->vrs[PC]);
+
+	return URC_OK;
+}
+
+/*
+ * Unwind a single frame starting with *sp for the symbol at *pc. It
+ * updates the *pc and *sp with the new values.
+ */
+int unwind_frame(struct stackframe *frame)
+{
+	unsigned long high, low;
+	struct unwind_idx *idx;
+	struct unwind_ctrl_block ctrl;
+
+	/* only go to a higher address on the stack */
+	low = frame->sp;
+	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+
+	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
+		 frame->pc, frame->lr, frame->sp);
+
+	if (!kernel_text_address(frame->pc))
+		return -URC_FAILURE;
+
+	idx = unwind_find_idx(frame->pc);
+	if (!idx) {
+		pr_warning("unwind: Index not found %08lx\n", frame->pc);
+		return -URC_FAILURE;
+	}
+
+	ctrl.vrs[FP] = frame->fp;
+	ctrl.vrs[SP] = frame->sp;
+	ctrl.vrs[LR] = frame->lr;
+	ctrl.vrs[PC] = 0;
+
+	if (idx->insn == 1)
+		/* can't unwind */
+		return -URC_FAILURE;
+	else if ((idx->insn & 0x80000000) == 0)
+		/* prel31 to the unwind table */
+		ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
+	else if ((idx->insn & 0xff000000) == 0x80000000)
+		/* only personality routine 0 supported in the index */
+		ctrl.insn = &idx->insn;
+	else {
+		pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n",
+			   idx->insn, idx);
+		return -URC_FAILURE;
+	}
+
+	/* check the personality routine */
+	if ((*ctrl.insn & 0xff000000) == 0x80000000) {
+		ctrl.byte = 2;
+		ctrl.entries = 1;
+	} else if ((*ctrl.insn & 0xff000000) == 0x81000000) {
+		ctrl.byte = 1;
+		ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16);
+	} else {
+		pr_warning("unwind: Unsupported personality routine %08lx at %p\n",
+			   *ctrl.insn, ctrl.insn);
+		return -URC_FAILURE;
+	}
+
+	while (ctrl.entries > 0) {
+		int urc;
+
+		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
+			return -URC_FAILURE;
+		urc = unwind_exec_insn(&ctrl);
+		if (urc < 0)
+			return urc;
+	}
+
+	if (ctrl.vrs[PC] == 0)
+		ctrl.vrs[PC] = ctrl.vrs[LR];
+
+	frame->fp = ctrl.vrs[FP];
+	frame->sp = ctrl.vrs[SP];
+	frame->lr = ctrl.vrs[LR];
+	frame->pc = ctrl.vrs[PC];
+
+	return URC_OK;
+}
+
+void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+	struct stackframe frame;
+	unsigned long high, low;
+	register unsigned long current_sp asm ("sp");
+
+	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+	if (!tsk)
+		tsk = current;
+
+	if (regs) {
+		frame.fp = regs->ARM_fp;
+		frame.sp = regs->ARM_sp;
+		frame.lr = regs->ARM_lr;
+		frame.pc = regs->ARM_pc;
+	} else if (tsk == current) {
+		frame.fp = (unsigned long)__builtin_frame_address(0);
+		frame.sp = current_sp;
+		frame.lr = (unsigned long)__builtin_return_address(0);
+		frame.pc = (unsigned long)unwind_backtrace;
+	} else {
+		/* task blocked in __switch_to */
+		frame.fp = thread_saved_fp(tsk);
+		frame.sp = thread_saved_sp(tsk);
+		/*
+		 * The function calling __switch_to cannot be a leaf function
+		 * so LR is recovered from the stack.
+		 */
+		frame.lr = 0;
+		frame.pc = thread_saved_pc(tsk);
+	}
+
+	low = frame.sp & ~(THREAD_SIZE - 1);
+	high = low + THREAD_SIZE;
+
+	while (1) {
+		int urc;
+		unsigned long where = frame.pc;
+
+		urc = unwind_frame(&frame);
+		if (urc < 0)
+			break;
+		dump_backtrace_entry(where, frame.pc, frame.sp - 4);
+	}
+}
+
+struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
+				      unsigned long text_addr,
+				      unsigned long text_size)
+{
+	unsigned long flags;
+	struct unwind_idx *idx;
+	struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
+
+	pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
+		 text_addr, text_size);
+
+	if (!tab)
+		return tab;
+
+	tab->start = (struct unwind_idx *)start;
+	tab->stop = (struct unwind_idx *)(start + size);
+	tab->begin_addr = text_addr;
+	tab->end_addr = text_addr + text_size;
+
+	/* Convert the symbol addresses to absolute values */
+	for (idx = tab->start; idx < tab->stop; idx++)
+		idx->addr = prel31_to_addr(&idx->addr);
+
+	spin_lock_irqsave(&unwind_lock, flags);
+	list_add_tail(&tab->list, &unwind_tables);
+	spin_unlock_irqrestore(&unwind_lock, flags);
+
+	return tab;
+}
+
+void unwind_table_del(struct unwind_table *tab)
+{
+	unsigned long flags;
+
+	if (!tab)
+		return;
+
+	spin_lock_irqsave(&unwind_lock, flags);
+	list_del(&tab->list);
+	spin_unlock_irqrestore(&unwind_lock, flags);
+
+	kfree(tab);
+}
+
+int __init unwind_init(void)
+{
+	struct unwind_idx *idx;
+
+	/* Convert the symbol addresses to absolute values */
+	for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
+		idx->addr = prel31_to_addr(&idx->addr);
+
+	pr_debug("unwind: ARM stack unwinding initialised\n");
+
+	return 0;
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 00216071eaf..5f664599c94 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -80,6 +80,8 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.ARM.exidx.exit.text)
+		*(.ARM.extab.exit.text)
 #ifndef CONFIG_MMU
 		*(.fixup)
 		*(__ex_table)
@@ -110,6 +112,23 @@ SECTIONS
 
 	_etext = .;			/* End of text and rodata section */
 
+#ifdef CONFIG_ARM_UNWIND
+	/*
+	 * Stack unwinding tables
+	 */
+	. = ALIGN(8);
+	.ARM.unwind_idx : {
+		__start_unwind_idx = .;
+		*(.ARM.exidx*)
+		__stop_unwind_idx = .;
+	}
+	.ARM.unwind_tab : {
+		__start_unwind_tab = .;
+		*(.ARM.extab*)
+		__stop_unwind_tab = .;
+	}
+#endif
+
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
 	. = PAGE_OFFSET + TEXT_OFFSET;
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
index 8f4115d734c..fe08ca1add6 100644
--- a/arch/arm/mach-aaec2000/include/mach/system.h
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -16,7 +16,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 134af97ff34..b7f23324231 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	unsigned long ebi0_csa;
+	struct platform_device *pdev;
+
+	if (!data)
+		return;
+
+	/*
+	 * assign CS4 or CS5 to SMC with Compact Flash logic support,
+	 * we assume SMC timings are configured by board code,
+	 * except True IDE where timings are controlled by driver
+	 */
+	ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	switch (data->chipselect) {
+	case 4:
+		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+	at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 1);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->vcc_pin)
+		/* initially off */
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* enable EBI controlled pins */
+	at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+	at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 81439fe6fb3..438efbb1748 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -238,6 +238,10 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(NULL, 0);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* PCK0 provides MCLK to the WM8731 */
+	at91_set_B_periph(AT91_PIN_PC1, 0);
+	/* SSC (for WM8731) */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 }
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 7b9ce7a336b..b5daf7f5e01 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -47,9 +47,6 @@ extern void at91_irq_resume(void);
 #define AT91RM9200_BGA		4	/* AT91RM9200 BGA package has 4 banks */
 
 struct at91_gpio_bank {
-	unsigned chipbase;		/* bank's first GPIO number */
-	void __iomem *regbase;		/* base of register bank */
-	struct at91_gpio_bank *next;	/* bank sharing same IRQ/clock/... */
 	unsigned short id;		/* peripheral ID */
 	unsigned long offset;		/* offset from system peripheral base */
 	struct clk *clock;		/* associated clock */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 2f7d4977dce..f2236f0e101 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -24,19 +24,59 @@
 #include <mach/at91_pio.h>
 #include <mach/gpio.h>
 
+#include <asm/gpio.h>
+
 #include "generic.h"
 
+struct at91_gpio_chip {
+	struct gpio_chip	chip;
+	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
+	struct at91_gpio_bank	*bank;		/* Bank definition */
+	void __iomem		*regbase;	/* Base of register bank */
+};
 
-static struct at91_gpio_bank *gpio;
-static int gpio_banks;
+#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val);
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+					unsigned offset);
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
+
+#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.request	  = at91_gpiolib_request,	\
+			.direction_input  = at91_gpiolib_direction_input, \
+			.direction_output = at91_gpiolib_direction_output, \
+			.get		  = at91_gpiolib_get,		\
+			.set		  = at91_gpiolib_set,		\
+			.dbg_show	  = at91_gpiolib_dbg_show,	\
+			.base		  = base_gpio,			\
+			.ngpio		  = nr_gpio,			\
+		},							\
+	}
+
+static struct at91_gpio_chip gpio_chip[] = {
+	AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
+	AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
+	AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
+	AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
+	AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
+};
 
+static int gpio_banks;
 
 static inline void __iomem *pin_to_controller(unsigned pin)
 {
 	pin -= PIN_BASE;
 	pin /= 32;
 	if (likely(pin < gpio_banks))
-		return gpio[pin].regbase;
+		return gpio_chip[pin].regbase;
 
 	return NULL;
 }
@@ -197,39 +237,6 @@ int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
 }
 EXPORT_SYMBOL(at91_set_multi_drive);
 
-/*--------------------------------------------------------------------------*/
-
-/* new-style GPIO calls; these expect at91_set_GPIO_periph to have been
- * called, and maybe at91_set_multi_drive() for putout pins.
- */
-
-int gpio_direction_input(unsigned pin)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
-		return -EINVAL;
-	__raw_writel(mask, pio + PIO_ODR);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned pin, int value)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
-		return -EINVAL;
-	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-	__raw_writel(mask, pio + PIO_OER);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-/*--------------------------------------------------------------------------*/
-
 /*
  * assuming the pin is muxed as a gpio output, set its value.
  */
@@ -282,7 +289,7 @@ static int gpio_irq_set_wake(unsigned pin, unsigned state)
 	else
 		wakeups[bank] &= ~mask;
 
-	set_irq_wake(gpio[bank].id, state);
+	set_irq_wake(gpio_chip[bank].bank->id, state);
 
 	return 0;
 }
@@ -292,14 +299,14 @@ void at91_gpio_suspend(void)
 	int i;
 
 	for (i = 0; i < gpio_banks; i++) {
-		void __iomem	*pio = gpio[i].regbase;
+		void __iomem	*pio = gpio_chip[i].regbase;
 
 		backups[i] = __raw_readl(pio + PIO_IMR);
 		__raw_writel(backups[i], pio + PIO_IDR);
 		__raw_writel(wakeups[i], pio + PIO_IER);
 
 		if (!wakeups[i])
-			clk_disable(gpio[i].clock);
+			clk_disable(gpio_chip[i].bank->clock);
 		else {
 #ifdef CONFIG_PM_DEBUG
 			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
@@ -313,10 +320,10 @@ void at91_gpio_resume(void)
 	int i;
 
 	for (i = 0; i < gpio_banks; i++) {
-		void __iomem	*pio = gpio[i].regbase;
+		void __iomem	*pio = gpio_chip[i].regbase;
 
 		if (!wakeups[i])
-			clk_enable(gpio[i].clock);
+			clk_enable(gpio_chip[i].bank->clock);
 
 		__raw_writel(wakeups[i], pio + PIO_IDR);
 		__raw_writel(backups[i], pio + PIO_IER);
@@ -380,12 +387,12 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
 	unsigned	pin;
 	struct irq_desc	*gpio;
-	struct at91_gpio_bank *bank;
+	struct at91_gpio_chip *at91_gpio;
 	void __iomem	*pio;
 	u32		isr;
 
-	bank = get_irq_chip_data(irq);
-	pio = bank->regbase;
+	at91_gpio = get_irq_chip_data(irq);
+	pio = at91_gpio->regbase;
 
 	/* temporarily mask (level sensitive) parent IRQ */
 	desc->chip->ack(irq);
@@ -396,14 +403,14 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		 */
 		isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
 		if (!isr) {
-			if (!bank->next)
+			if (!at91_gpio->next)
 				break;
-			bank = bank->next;
-			pio = bank->regbase;
+			at91_gpio = at91_gpio->next;
+			pio = at91_gpio->regbase;
 			continue;
 		}
 
-		pin = bank->chipbase;
+		pin = at91_gpio->chip.base;
 		gpio = &irq_desc[pin];
 
 		while (isr) {
@@ -502,17 +509,17 @@ static struct lock_class_key gpio_lock_class;
 void __init at91_gpio_irq_setup(void)
 {
 	unsigned		pioc, pin;
-	struct at91_gpio_bank	*this, *prev;
+	struct at91_gpio_chip	*this, *prev;
 
-	for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
+	for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
 			pioc++ < gpio_banks;
 			prev = this, this++) {
-		unsigned	id = this->id;
+		unsigned	id = this->bank->id;
 		unsigned	i;
 
 		__raw_writel(~0, this->regbase + PIO_IDR);
 
-		for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+		for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
 			lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
 
 			/*
@@ -537,32 +544,117 @@ void __init at91_gpio_irq_setup(void)
 	pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
 }
 
+/* gpiolib support */
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	__raw_writel(mask, pio + PIO_ODR);
+	return 0;
+}
+
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+	__raw_writel(mask, pio + PIO_OER);
+	return 0;
+}
+
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+	u32 pdsr;
+
+	pdsr = __raw_readl(pio + PIO_PDSR);
+	return (pdsr & mask) != 0;
+}
+
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+}
+
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned pin = chip->base + offset;
+	void __iomem *pio = pin_to_controller(pin);
+	unsigned mask = pin_to_mask(pin);
+
+	/* Cannot request GPIOs that are in alternate function mode */
+	if (!(__raw_readl(pio + PIO_PSR) & mask))
+		return -EPERM;
+
+	return 0;
+}
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	int i;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		unsigned pin = chip->base + i;
+		void __iomem *pio = pin_to_controller(pin);
+		unsigned mask = pin_to_mask(pin);
+		const char *gpio_label;
+
+		gpio_label = gpiochip_is_requested(chip, i);
+		if (gpio_label) {
+			seq_printf(s, "[%s] GPIO%s%d: ",
+				   gpio_label, chip->label, i);
+			if (__raw_readl(pio + PIO_PSR) & mask)
+				seq_printf(s, "[gpio] %s\n",
+					   at91_get_gpio_value(pin) ?
+					   "set" : "clear");
+			else
+				seq_printf(s, "[periph %s]\n",
+					   __raw_readl(pio + PIO_ABSR) &
+					   mask ? "B" : "A");
+		}
+	}
+}
+
 /*
  * Called from the processor-specific init to enable GPIO pin support.
  */
 void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
 {
 	unsigned		i;
-	struct at91_gpio_bank	*last;
+	struct at91_gpio_chip *at91_gpio, *last = NULL;
 
 	BUG_ON(nr_banks > MAX_GPIO_BANKS);
 
-	gpio = data;
 	gpio_banks = nr_banks;
 
-	for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
-		data->chipbase = PIN_BASE + i * 32;
-		data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
+	for (i = 0; i < nr_banks; i++) {
+		at91_gpio = &gpio_chip[i];
+
+		at91_gpio->bank = &data[i];
+		at91_gpio->chip.base = PIN_BASE + i * 32;
+		at91_gpio->regbase = at91_gpio->bank->offset +
+			(void __iomem *)AT91_VA_BASE_SYS;
 
 		/* enable PIO controller's clock */
-		clk_enable(data->clock);
+		clk_enable(at91_gpio->bank->clock);
 
-		/*
-		 * Some processors share peripheral ID between multiple GPIO banks.
-		 *  SAM9263 (PIOC, PIOD, PIOE)
-		 *  CAP9 (PIOA, PIOB, PIOC, PIOD)
-		 */
-		if (last && last->id == data->id)
-			last->next = data;
+		/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+		if (last && last->bank->id == at91_gpio->bank->id)
+			last->next = at91_gpio;
+		last = at91_gpio;
+
+		gpiochip_add(&at91_gpio->chip);
 	}
 }
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 0b3ae21b456..793fe7b25f3 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -56,6 +56,9 @@ struct at91_cf_data {
 	u8	vcc_pin;		/* power switching */
 	u8	rst_pin;		/* card reset */
 	u8	chipselect;		/* EBI Chip Select number */
+	u8	flags;
+#define AT91_CF_TRUE_IDE	0x01
+#define AT91_IDE_SWAP_A0_A2	0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index bffa6741a75..04c91e31c9c 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -213,32 +213,12 @@ extern void at91_gpio_resume(void);
  */
 
 #include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	at91_set_gpio_value(gpio, value);
-}
-
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
 static inline int gpio_to_irq(unsigned gpio)
 {
 	return gpio;
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index e712658d966..5268af3933c 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -43,7 +43,7 @@ static inline void arch_idle(void)
 
 void (*at91_arch_reset)(void);
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/* call the CPU-specific reset function */
 	if (at91_arch_reset)
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index 24e96159e3e..f916cd7a477 100644
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -32,7 +32,7 @@ static inline void arch_idle(void)
 	mov	r0, r0");
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 17ca41dc2c5..b7e7036674f 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -21,7 +21,7 @@ static void arch_idle(void)
 	cpu_do_idle();
 }
 
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
 {
 	davinci_watchdog_reset();
 }
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
index 350a028997e..9a26245bf1f 100644
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -34,6 +34,6 @@ static inline void arch_idle(void)
 	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
 }
 
-#define arch_reset(mode)	cpu_reset(0x80000000)
+#define arch_reset(mode, cmd)	cpu_reset(0x80000000)
 
 #endif
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 944e42d5164..9522e205b73 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o clock.o gpio.o
+obj-y			:= core.o clock.o dma-m2p.o gpio.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 96049283a10..e8ebeaea6c4 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -41,6 +41,56 @@ static struct clk clk_usb_host = {
 	.enable_mask	= EP93XX_SYSCON_CLOCK_USH_EN,
 };
 
+/* DMA Clocks */
+static struct clk clk_m2p0 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00020000,
+};
+static struct clk clk_m2p1 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00010000,
+};
+static struct clk clk_m2p2 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00080000,
+};
+static struct clk clk_m2p3 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00040000,
+};
+static struct clk clk_m2p4 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00200000,
+};
+static struct clk clk_m2p5 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00100000,
+};
+static struct clk clk_m2p6 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00800000,
+};
+static struct clk clk_m2p7 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00400000,
+};
+static struct clk clk_m2p8 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x02000000,
+};
+static struct clk clk_m2p9 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x01000000,
+};
+static struct clk clk_m2m0 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x04000000,
+};
+static struct clk clk_m2m1 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x08000000,
+};
+
 #define INIT_CK(dev,con,ck)					\
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
@@ -54,6 +104,18 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL, "pclk", &clk_p),
 	INIT_CK(NULL, "pll2", &clk_pll2),
 	INIT_CK(NULL, "usb_host", &clk_usb_host),
+	INIT_CK(NULL, "m2p0", &clk_m2p0),
+	INIT_CK(NULL, "m2p1", &clk_m2p1),
+	INIT_CK(NULL, "m2p2", &clk_m2p2),
+	INIT_CK(NULL, "m2p3", &clk_m2p3),
+	INIT_CK(NULL, "m2p4", &clk_m2p4),
+	INIT_CK(NULL, "m2p5", &clk_m2p5),
+	INIT_CK(NULL, "m2p6", &clk_m2p6),
+	INIT_CK(NULL, "m2p7", &clk_m2p7),
+	INIT_CK(NULL, "m2p8", &clk_m2p8),
+	INIT_CK(NULL, "m2p9", &clk_m2p9),
+	INIT_CK(NULL, "m2m0", &clk_m2m0),
+	INIT_CK(NULL, "m2m1", &clk_m2m1),
 };
 
 
@@ -110,6 +172,22 @@ static unsigned long calc_pll_rate(u32 config_word)
 	return (unsigned long)rate;
 }
 
+static void __init ep93xx_dma_clock_init(void)
+{
+	clk_m2p0.rate = clk_h.rate;
+	clk_m2p1.rate = clk_h.rate;
+	clk_m2p2.rate = clk_h.rate;
+	clk_m2p3.rate = clk_h.rate;
+	clk_m2p4.rate = clk_h.rate;
+	clk_m2p5.rate = clk_h.rate;
+	clk_m2p6.rate = clk_h.rate;
+	clk_m2p7.rate = clk_h.rate;
+	clk_m2p8.rate = clk_h.rate;
+	clk_m2p9.rate = clk_h.rate;
+	clk_m2m0.rate = clk_h.rate;
+	clk_m2m1.rate = clk_h.rate;
+}
+
 static int __init ep93xx_clock_init(void)
 {
 	u32 value;
@@ -124,6 +202,7 @@ static int __init ep93xx_clock_init(void)
 	clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
 	clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
 	clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
+	ep93xx_dma_clock_init();
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
new file mode 100644
index 00000000000..a2df5bb7dff
--- /dev/null
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -0,0 +1,408 @@
+/*
+ * arch/arm/mach-ep93xx/dma-m2p.c
+ * M2P DMA handling for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2006 Applied Data Systems
+ *
+ * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+/*
+ * On the EP93xx chip the following peripherals my be allocated to the 10
+ * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
+ *
+ *	I2S	contains 3 Tx and 3 Rx DMA Channels
+ *	AAC	contains 3 Tx and 3 Rx DMA Channels
+ *	UART1	contains 1 Tx and 1 Rx DMA Channels
+ *	UART2	contains 1 Tx and 1 Rx DMA Channels
+ *	UART3	contains 1 Tx and 1 Rx DMA Channels
+ *	IrDA	contains 1 Tx and 1 Rx DMA Channels
+ *
+ * SSP and IDE use the Memory to Memory (M2M) channels and are not covered
+ * with this implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <mach/dma.h>
+#include <mach/hardware.h>
+
+#define M2P_CONTROL			0x00
+#define  M2P_CONTROL_STALL_IRQ_EN	(1 << 0)
+#define  M2P_CONTROL_NFB_IRQ_EN		(1 << 1)
+#define  M2P_CONTROL_ERROR_IRQ_EN	(1 << 3)
+#define  M2P_CONTROL_ENABLE		(1 << 4)
+#define M2P_INTERRUPT			0x04
+#define  M2P_INTERRUPT_STALL		(1 << 0)
+#define  M2P_INTERRUPT_NFB		(1 << 1)
+#define  M2P_INTERRUPT_ERROR		(1 << 3)
+#define M2P_PPALLOC			0x08
+#define M2P_STATUS			0x0c
+#define M2P_REMAIN			0x14
+#define M2P_MAXCNT0			0x20
+#define M2P_BASE0			0x24
+#define M2P_MAXCNT1			0x30
+#define M2P_BASE1			0x34
+
+#define STATE_IDLE	0	/* Channel is inactive.  */
+#define STATE_STALL	1	/* Channel is active, no buffers pending.  */
+#define STATE_ON	2	/* Channel is active, one buffer pending.  */
+#define STATE_NEXT	3	/* Channel is active, two buffers pending.  */
+
+struct m2p_channel {
+	char				*name;
+	void __iomem			*base;
+	int				irq;
+
+	struct clk			*clk;
+	spinlock_t			lock;
+
+	void				*client;
+	unsigned			next_slot:1;
+	struct ep93xx_dma_buffer	*buffer_xfer;
+	struct ep93xx_dma_buffer	*buffer_next;
+	struct list_head		buffers_pending;
+};
+
+static struct m2p_channel m2p_rx[] = {
+	{"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1},
+	{"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3},
+	{"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5},
+	{"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7},
+	{"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9},
+	{NULL},
+};
+
+static struct m2p_channel m2p_tx[] = {
+	{"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0},
+	{"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2},
+	{"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4},
+	{"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6},
+	{"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8},
+	{NULL},
+};
+
+static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf)
+{
+	if (ch->next_slot == 0) {
+		writel(buf->size, ch->base + M2P_MAXCNT0);
+		writel(buf->bus_addr, ch->base + M2P_BASE0);
+	} else {
+		writel(buf->size, ch->base + M2P_MAXCNT1);
+		writel(buf->bus_addr, ch->base + M2P_BASE1);
+	}
+	ch->next_slot ^= 1;
+}
+
+static void choose_buffer_xfer(struct m2p_channel *ch)
+{
+	struct ep93xx_dma_buffer *buf;
+
+	ch->buffer_xfer = NULL;
+	if (!list_empty(&ch->buffers_pending)) {
+		buf = list_entry(ch->buffers_pending.next,
+				 struct ep93xx_dma_buffer, list);
+		list_del(&buf->list);
+		feed_buf(ch, buf);
+		ch->buffer_xfer = buf;
+	}
+}
+
+static void choose_buffer_next(struct m2p_channel *ch)
+{
+	struct ep93xx_dma_buffer *buf;
+
+	ch->buffer_next = NULL;
+	if (!list_empty(&ch->buffers_pending)) {
+		buf = list_entry(ch->buffers_pending.next,
+				 struct ep93xx_dma_buffer, list);
+		list_del(&buf->list);
+		feed_buf(ch, buf);
+		ch->buffer_next = buf;
+	}
+}
+
+static inline void m2p_set_control(struct m2p_channel *ch, u32 v)
+{
+	/*
+	 * The control register must be read immediately after being written so
+	 * that the internal state machine is correctly updated. See the ep93xx
+	 * users' guide for details.
+	 */
+	writel(v, ch->base + M2P_CONTROL);
+	readl(ch->base + M2P_CONTROL);
+}
+
+static inline int m2p_channel_state(struct m2p_channel *ch)
+{
+	return (readl(ch->base + M2P_STATUS) >> 4) & 0x3;
+}
+
+static irqreturn_t m2p_irq(int irq, void *dev_id)
+{
+	struct m2p_channel *ch = dev_id;
+	struct ep93xx_dma_m2p_client *cl;
+	u32 irq_status, v;
+	int error = 0;
+
+	cl = ch->client;
+
+	spin_lock(&ch->lock);
+	irq_status = readl(ch->base + M2P_INTERRUPT);
+
+	if (irq_status & M2P_INTERRUPT_ERROR) {
+		writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT);
+		error = 1;
+	}
+
+	if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) {
+		spin_unlock(&ch->lock);
+		return IRQ_NONE;
+	}
+
+	switch (m2p_channel_state(ch)) {
+	case STATE_IDLE:
+		pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+		BUG();
+		break;
+
+	case STATE_STALL:
+		cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+		if (ch->buffer_next != NULL) {
+			cl->buffer_finished(cl->cookie, ch->buffer_next,
+					    0, error);
+		}
+		choose_buffer_xfer(ch);
+		choose_buffer_next(ch);
+		if (ch->buffer_xfer != NULL)
+			cl->buffer_started(cl->cookie, ch->buffer_xfer);
+		break;
+
+	case STATE_ON:
+		cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+		ch->buffer_xfer = ch->buffer_next;
+		choose_buffer_next(ch);
+		cl->buffer_started(cl->cookie, ch->buffer_xfer);
+		break;
+
+	case STATE_NEXT:
+		pr_crit("m2p_irq: dma interrupt while next\n");
+		BUG();
+		break;
+	}
+
+	v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN |
+					      M2P_CONTROL_NFB_IRQ_EN);
+	if (ch->buffer_xfer != NULL)
+		v |= M2P_CONTROL_STALL_IRQ_EN;
+	if (ch->buffer_next != NULL)
+		v |= M2P_CONTROL_NFB_IRQ_EN;
+	m2p_set_control(ch, v);
+
+	spin_unlock(&ch->lock);
+	return IRQ_HANDLED;
+}
+
+static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl)
+{
+	struct m2p_channel *ch;
+	int i;
+
+	if (cl->flags & EP93XX_DMA_M2P_RX)
+		ch = m2p_rx;
+	else
+		ch = m2p_tx;
+
+	for (i = 0; ch[i].base; i++) {
+		struct ep93xx_dma_m2p_client *client;
+
+		client = ch[i].client;
+		if (client != NULL) {
+			int port;
+
+			port = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+			if (port == (client->flags &
+				     EP93XX_DMA_M2P_PORT_MASK)) {
+				pr_warning("DMA channel already used by %s\n",
+					   cl->name ? : "unknown client");
+				return ERR_PTR(-EBUSY);
+			}
+		}
+	}
+
+	for (i = 0; ch[i].base; i++) {
+		if (ch[i].client == NULL)
+			return ch + i;
+	}
+
+	pr_warning("No free DMA channel for %s\n",
+		   cl->name ? : "unknown client");
+	return ERR_PTR(-ENODEV);
+}
+
+static void channel_enable(struct m2p_channel *ch)
+{
+	struct ep93xx_dma_m2p_client *cl = ch->client;
+	u32 v;
+
+	clk_enable(ch->clk);
+
+	v = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+	writel(v, ch->base + M2P_PPALLOC);
+
+	v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK;
+	v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN;
+	m2p_set_control(ch, v);
+}
+
+static void channel_disable(struct m2p_channel *ch)
+{
+	u32 v;
+
+	v = readl(ch->base + M2P_CONTROL);
+	v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
+	m2p_set_control(ch, v);
+
+	while (m2p_channel_state(ch) == STATE_ON)
+		cpu_relax();
+
+	m2p_set_control(ch, 0x0);
+
+	while (m2p_channel_state(ch) == STATE_STALL)
+		cpu_relax();
+
+	clk_disable(ch->clk);
+}
+
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl)
+{
+	struct m2p_channel *ch;
+	int err;
+
+	ch = find_free_channel(cl);
+	if (IS_ERR(ch))
+		return PTR_ERR(ch);
+
+	err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch);
+	if (err)
+		return err;
+
+	ch->client = cl;
+	ch->next_slot = 0;
+	ch->buffer_xfer = NULL;
+	ch->buffer_next = NULL;
+	INIT_LIST_HEAD(&ch->buffers_pending);
+
+	cl->channel = ch;
+
+	channel_enable(ch);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register);
+
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl)
+{
+	struct m2p_channel *ch = cl->channel;
+
+	channel_disable(ch);
+	free_irq(ch->irq, ch);
+	ch->client = NULL;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister);
+
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl,
+			   struct ep93xx_dma_buffer *buf)
+{
+	struct m2p_channel *ch = cl->channel;
+	unsigned long flags;
+	u32 v;
+
+	spin_lock_irqsave(&ch->lock, flags);
+	v = readl(ch->base + M2P_CONTROL);
+	if (ch->buffer_xfer == NULL) {
+		ch->buffer_xfer = buf;
+		feed_buf(ch, buf);
+		cl->buffer_started(cl->cookie, buf);
+
+		v |= M2P_CONTROL_STALL_IRQ_EN;
+		m2p_set_control(ch, v);
+
+	} else if (ch->buffer_next == NULL) {
+		ch->buffer_next = buf;
+		feed_buf(ch, buf);
+
+		v |= M2P_CONTROL_NFB_IRQ_EN;
+		m2p_set_control(ch, v);
+	} else {
+		list_add_tail(&buf->list, &ch->buffers_pending);
+	}
+	spin_unlock_irqrestore(&ch->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit);
+
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl,
+				     struct ep93xx_dma_buffer *buf)
+{
+	struct m2p_channel *ch = cl->channel;
+
+	list_add_tail(&buf->list, &ch->buffers_pending);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive);
+
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl)
+{
+	struct m2p_channel *ch = cl->channel;
+
+	channel_disable(ch);
+	ch->next_slot = 0;
+	ch->buffer_xfer = NULL;
+	ch->buffer_next = NULL;
+	INIT_LIST_HEAD(&ch->buffers_pending);
+	channel_enable(ch);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush);
+
+static int init_channel(struct m2p_channel *ch)
+{
+	ch->clk = clk_get(NULL, ch->name);
+	if (IS_ERR(ch->clk))
+		return PTR_ERR(ch->clk);
+
+	spin_lock_init(&ch->lock);
+	ch->client = NULL;
+
+	return 0;
+}
+
+static int __init ep93xx_dma_m2p_init(void)
+{
+	int i;
+	int ret;
+
+	for (i = 0; m2p_rx[i].base; i++) {
+		ret = init_channel(m2p_rx + i);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; m2p_tx[i].base; i++) {
+		ret = init_channel(m2p_tx + i);
+		if (ret)
+			return ret;
+	}
+
+	pr_info("M2P DMA subsystem initialized\n");
+	return 0;
+}
+arch_initcall(ep93xx_dma_m2p_init);
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
index 5b5c22b681b..6171167d331 100644
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ b/arch/arm/mach-ep93xx/edb9307a.c
@@ -48,12 +48,24 @@ static struct ep93xx_eth_data edb9307a_eth_data = {
 	.phy_id		= 1,
 };
 
+static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
+	{
+		/* On-board battery backed RTC */
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+	/*
+	 * The I2C signals are also routed to the Expansion Connector (J4)
+	 */
+};
+
 static void __init edb9307a_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&edb9307a_flash);
 
 	ep93xx_register_eth(&edb9307a_eth_data, 1);
+
+	ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
 }
 
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 00000000000..ef6bd9d1314
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+
+struct ep93xx_dma_buffer {
+	struct list_head	list;
+	u32			bus_addr;
+	u16			size;
+};
+
+struct ep93xx_dma_m2p_client {
+	char			*name;
+	u8			flags;
+	void			*cookie;
+	void			(*buffer_started)(void *cookie,
+					struct ep93xx_dma_buffer *buf);
+	void			(*buffer_finished)(void *cookie,
+					struct ep93xx_dma_buffer *buf,
+					int bytes, int error);
+
+	/* Internal to the DMA code.  */
+	void			*channel;
+};
+
+#define EP93XX_DMA_M2P_PORT_I2S1	0x00
+#define EP93XX_DMA_M2P_PORT_I2S2	0x01
+#define EP93XX_DMA_M2P_PORT_AAC1	0x02
+#define EP93XX_DMA_M2P_PORT_AAC2	0x03
+#define EP93XX_DMA_M2P_PORT_AAC3	0x04
+#define EP93XX_DMA_M2P_PORT_I2S3	0x05
+#define EP93XX_DMA_M2P_PORT_UART1	0x06
+#define EP93XX_DMA_M2P_PORT_UART2	0x07
+#define EP93XX_DMA_M2P_PORT_UART3	0x08
+#define EP93XX_DMA_M2P_PORT_IRDA	0x09
+#define EP93XX_DMA_M2P_PORT_MASK	0x0f
+#define EP93XX_DMA_M2P_TX		0x00
+#define EP93XX_DMA_M2P_RX		0x10
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20
+#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40
+#define EP93XX_DMA_M2P_ERROR_MASK	0x60
+
+int  ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
+			   struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
+				     struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 22d6c9a6e4c..f66be12b856 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -58,7 +58,8 @@
 
 
 /* AHB peripherals */
-#define EP93XX_DMA_BASE			(EP93XX_AHB_VIRT_BASE + 0x00000000)
+#define EP93XX_DMA_BASE			((void __iomem *)		\
+					 (EP93XX_AHB_VIRT_BASE + 0x00000000))
 
 #define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
 #define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 88f7e88f152..05f0f4f2f3c 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,6 +4,8 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_board_info;
+
 struct ep93xx_eth_data
 {
 	unsigned char	dev_addr[6];
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index 67789d0f329..ed8f35e4f06 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -9,7 +9,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	u32 devicecfg;
 
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index 4f350634696..e2e0df8bcee 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -21,16 +21,16 @@
 #include <asm/hardware/dec21285.h>
 
 #if 0
-static int fb_dma_request(dmach_t channel, dma_t *dma)
+static int fb_dma_request(unsigned int chan, dma_t *dma)
 {
 	return -EINVAL;
 }
 
-static void fb_dma_enable(dmach_t channel, dma_t *dma)
+static void fb_dma_enable(unsigned int chan, dma_t *dma)
 {
 }
 
-static void fb_dma_disable(dmach_t channel, dma_t *dma)
+static void fb_dma_disable(unsigned int chan, dma_t *dma)
 {
 }
 
@@ -42,7 +42,7 @@ static struct dma_ops fb_dma_ops = {
 };
 #endif
 
-void __init arch_dma_init(dma_t *dma)
+static int __init fb_dma_init(void)
 {
 #if 0
 	dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
@@ -50,6 +50,8 @@ void __init arch_dma_init(dma_t *dma)
 #endif
 #ifdef CONFIG_ISA_DMA
 	if (footbridge_cfn_mode())
-		isa_init_dma(dma + _ISA_DMA(0));
+		isa_init_dma();
 #endif
+	return 0;
 }
+core_initcall(fb_dma_init);
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 2db7f36bd6c..0b293156620 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -18,7 +18,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if (mode == 's') {
 		/*
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
index e4a7c760d52..a708d24ee46 100644
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -25,7 +25,7 @@ static void arch_idle(void)
 }
 
 
-static __inline__ void arch_reset(char mode)
+static __inline__ void arch_reset(char mode, const char *cmd)
 {
 	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
 }
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
index adee7e51bab..46d4ca91af7 100644
--- a/arch/arm/mach-imx/include/mach/system.h
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -32,7 +32,7 @@ arch_idle(void)
 }
 
 static inline void
-arch_reset(char mode)
+arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
index c485345c8c7..e1551b8dab7 100644
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -32,7 +32,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * To reset, we hit the on-board reset register
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index e012bf13c95..42ae29b288a 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -59,7 +59,10 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 	})
 
 #define __arch_page_to_dma(dev, page)					\
-	__arch_virt_to_dma(dev, page_address(page))
+	({								\
+		/* __is_lbus_virt() can never be true for RAM pages */	\
+		(dma_addr_t)page_to_phys(page);				\
+	})
 
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
index c7127f416e1..d0c66ef450a 100644
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -13,7 +13,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Reset the internal bus (warning both cores are reset)
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
index 32d9e5b0a28..a4b808fe0d8 100644
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -16,7 +16,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	local_irq_disable();
 
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
index 0cb3ad862ac..f192a34be07 100644
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -14,7 +14,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	*IOP3XX_PCSR = 0x30;
 
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
index 2e9c68f95a2..de370992c84 100644
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -17,7 +17,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	local_irq_disable();
 
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
index d57c3fc10f1..8920ff2dff1 100644
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -19,7 +19,7 @@ static inline void arch_idle(void)
 #endif
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/* First try machine specific support */
 	if (machine_is_ixdp2351()) {
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index d816c51320c..70afcfe5b88 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -366,7 +366,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
 }
 
 void __init ixp4xx_pci_preinit(void)
-{  
+{
 	unsigned long cpuid = read_cpuid_id();
 
 	/*
@@ -386,17 +386,17 @@ void __init ixp4xx_pci_preinit(void)
 
 	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
 
-	/* 
+	/*
 	 * We use identity AHB->PCI address translation
 	 * in the 0x48000000 to 0x4bffffff address space
 	 */
 	*PCI_PCIMEMBASE = 0x48494A4B;
 
-	/* 
+	/*
 	 * We also use identity PCI->AHB address translation
 	 * in 4 16MB BARs that begin at the physical memory start
 	 */
-	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + 
+	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
 		((PHYS_OFFSET & 0xFF000000) >> 8) +
 		((PHYS_OFFSET & 0xFF000000) >> 16) +
 		((PHYS_OFFSET & 0xFF000000) >> 24) +
@@ -408,18 +408,19 @@ void __init ixp4xx_pci_preinit(void)
 		pr_debug("setup BARs in controller\n");
 
 		/*
-		 * We configure the PCI inbound memory windows to be 
+		 * We configure the PCI inbound memory windows to be
 		 * 1:1 mapped to SDRAM
 		 */
-		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000);
-		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000);
-		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000);
-		local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000);
+		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
+		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
+		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
+		local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M);
 
 		/*
-		 * Enable CSR window at 0xff000000.
+		 * Enable CSR window at 64 MiB to allow PCI masters
+		 * to continue prefetching past 64 MiB boundary.
 		 */
-		local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008);
+		local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
 
 		/*
 		 * Enable the IO window to be way up high, at 0xfffffc00
@@ -500,7 +501,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index 51bd69c46d9..def7773be67 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -17,26 +17,31 @@
 #include <asm/cputype.h>
 
 /* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE	0x69054040
-#define IXP465_PROCESSOR_ID_VALUE	0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
-
-#define cpu_is_ixp42x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP465_PROCESSOR_ID_VALUE)
+#define IXP42X_PROCESSOR_ID_VALUE	0x690541c0 /* including unused 0x690541Ex */
+#define IXP42X_PROCESSOR_ID_MASK	0xffffffc0
+
+#define IXP43X_PROCESSOR_ID_VALUE	0x69054040
+#define IXP43X_PROCESSOR_ID_MASK	0xfffffff0
+
+#define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
+#define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
+
+#define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
+			 IXP42X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
+			 IXP43X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x()	((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
+			 IXP46X_PROCESSOR_ID_VALUE)
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
 	unsigned int val = ~*IXP4XX_EXP_CFG2;
-	val &= ~IXP4XX_FEATURE_RESERVED;
-	if (!cpu_is_ixp46x())
-		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
 
-	return val;
+	if (cpu_is_ixp42x())
+		return val & IXP42X_FEATURE_MASK;
+	if (cpu_is_ixp43x())
+		return val & IXP43X_FEATURE_MASK;
+	return val & IXP46X_FEATURE_MASK;
 }
 
 static inline void ixp4xx_write_feature_bits(u32 value)
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index ad9c888dd85..97c530f66e7 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -604,6 +604,7 @@
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 
 /* "fuse" bits of IXP_EXP_CFG2 */
+/* All IXP4xx CPUs */
 #define IXP4XX_FEATURE_RCOMP		(1 << 0)
 #define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
 #define IXP4XX_FEATURE_HASH		(1 << 2)
@@ -619,20 +620,41 @@
 #define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
 #define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
 #define IXP4XX_FEATURE_PCI		(1 << 14)
-#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
 #define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
+#define IXP42X_FEATURE_MASK		(IXP4XX_FEATURE_RCOMP            | \
+					 IXP4XX_FEATURE_USB_DEVICE       | \
+					 IXP4XX_FEATURE_HASH             | \
+					 IXP4XX_FEATURE_AES              | \
+					 IXP4XX_FEATURE_DES              | \
+					 IXP4XX_FEATURE_HDLC             | \
+					 IXP4XX_FEATURE_AAL              | \
+					 IXP4XX_FEATURE_HSS              | \
+					 IXP4XX_FEATURE_UTOPIA           | \
+					 IXP4XX_FEATURE_NPEB_ETH0        | \
+					 IXP4XX_FEATURE_NPEC_ETH         | \
+					 IXP4XX_FEATURE_RESET_NPEA       | \
+					 IXP4XX_FEATURE_RESET_NPEB       | \
+					 IXP4XX_FEATURE_RESET_NPEC       | \
+					 IXP4XX_FEATURE_PCI              | \
+					 IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
+					 IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+
+/* IXP43x/46x CPUs */
+#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
 #define IXP4XX_FEATURE_USB_HOST		(1 << 18)
 #define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
+#define IXP43X_FEATURE_MASK		(IXP42X_FEATURE_MASK             | \
+					 IXP4XX_FEATURE_ECC_TIMESYNC     | \
+					 IXP4XX_FEATURE_USB_HOST         | \
+					 IXP4XX_FEATURE_NPEA_ETH)
+
+/* IXP46x CPU (including IXP455) only */
 #define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
 #define IXP4XX_FEATURE_RSA		(1 << 21)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
-#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
-
-#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
-				    IXP4XX_FEATURE_USB_HOST |		\
-				    IXP4XX_FEATURE_NPEA_ETH |		\
-				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
-				    IXP4XX_FEATURE_RSA |		\
-				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+#define IXP46X_FEATURE_MASK		(IXP43X_FEATURE_MASK             | \
+					 IXP4XX_FEATURE_NPEB_ETH_1_TO_3  | \
+					 IXP4XX_FEATURE_RSA)
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 92a7e8ddf69..d2aa26f5acd 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -20,7 +20,7 @@ static inline void arch_idle(void)
 }
 
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if ( 1 && mode == 's') {
 		/* Jump into ROM at address 0 */
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index c73a94d0ca2..25231023490 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -575,8 +575,8 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
 		for (i = 0; i < image->size; i++)
 			image->data[i] = swab32(image->data[i]);
 
-	if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
-		print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+	if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
+		print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on "
 			  "IXP42x\n");
 		goto err;
 	}
@@ -596,7 +596,7 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
 
-	if (!cpu_is_ixp46x()) {
+	if (cpu_is_ixp42x()) {
 		if (!npe->id)
 			instr_size = NPE_A_42X_INSTR_SIZE;
 		else
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3600cd9f051..b5421cccd7e 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,18 @@ config MACH_RD88F6281
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
+config MACH_SHEEVAPLUG
+	bool "Marvell SheevaPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell SheevaPlug Reference Board.
+
+config MACH_TS219
+	bool "QNAP TS-119 and TS-219 Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-119 and TS-219 Turbo NAS devices.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index b96c55dad34..8f03c9b9bdd 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,5 +1,7 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o
+obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
 
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b3404b7775b..19b03f62c3f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
@@ -24,6 +25,7 @@
 #include <mach/kirkwood.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
+#include <plat/mvsdio.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
 #include <plat/time.h>
@@ -254,7 +256,7 @@ static struct resource kirkwood_rtc_resource = {
 	.flags	= IORESOURCE_MEM,
 };
 
-void __init kirkwood_rtc_init(void)
+static void __init kirkwood_rtc_init(void)
 {
 	platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
 }
@@ -296,6 +298,50 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 
 
 /*****************************************************************************
+ * SD/SDIO/MMC
+ ****************************************************************************/
+static struct resource mvsdio_resources[] = {
+	[0] = {
+		.start	= SDIO_PHYS_BASE,
+		.end	= SDIO_PHYS_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KIRKWOOD_SDIO,
+		.end	= IRQ_KIRKWOOD_SDIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 mvsdio_dmamask = 0xffffffffUL;
+
+static struct platform_device kirkwood_sdio = {
+	.name		= "mvsdio",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &mvsdio_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(mvsdio_resources),
+	.resource	= mvsdio_resources,
+};
+
+void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (rev == 0)  /* catch all Kirkwood Z0's */
+		mvsdio_data->clock = 100000000;
+	else
+		mvsdio_data->clock = 200000000;
+	mvsdio_data->dram = &kirkwood_mbus_dram_info;
+	kirkwood_sdio.dev.platform_data = mvsdio_data;
+	platform_device_register(&kirkwood_sdio);
+}
+
+
+/*****************************************************************************
  * SPI
  ****************************************************************************/
 static struct orion_spi_info kirkwood_spi_plat_data = {
@@ -326,6 +372,45 @@ void __init kirkwood_spi_init()
 
 
 /*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
+	.freq_m		= 8, /* assumes 166 MHz TCLK */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource kirkwood_i2c_resources[] = {
+	{
+		.name	= "i2c",
+		.start	= I2C_PHYS_BASE,
+		.end	= I2C_PHYS_BASE + 0x1f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "i2c",
+		.start	= IRQ_KIRKWOOD_TWSI,
+		.end	= IRQ_KIRKWOOD_TWSI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_i2c = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(kirkwood_i2c_resources),
+	.resource	= kirkwood_i2c_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_i2c_pdata,
+	},
+};
+
+void __init kirkwood_i2c_init(void)
+{
+	platform_device_register(&kirkwood_i2c);
+}
+
+
+/*****************************************************************************
  * UART0
  ****************************************************************************/
 static struct plat_serial8250_port kirkwood_uart0_data[] = {
@@ -502,7 +587,7 @@ static struct platform_device kirkwood_xor01_channel = {
 	},
 };
 
-void __init kirkwood_xor0_init(void)
+static void __init kirkwood_xor0_init(void)
 {
 	platform_device_register(&kirkwood_xor0_shared);
 
@@ -600,7 +685,7 @@ static struct platform_device kirkwood_xor11_channel = {
 	},
 };
 
-void __init kirkwood_xor1_init(void)
+static void __init kirkwood_xor1_init(void)
 {
 	platform_device_register(&kirkwood_xor1_shared);
 
@@ -708,4 +793,9 @@ void __init kirkwood_init(void)
 #ifdef CONFIG_CACHE_FEROCEON_L2
 	kirkwood_l2_init();
 #endif
+
+	/* internal devices that every board has */
+	kirkwood_rtc_init();
+	kirkwood_xor0_init();
+	kirkwood_xor1_init();
 }
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index fe367c18e72..6ee88406f38 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -14,6 +14,7 @@
 struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
+struct mvsdio_platform_data;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -33,14 +34,14 @@ void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
-void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
 void kirkwood_spi_init(void);
+void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
-void kirkwood_xor0_init(void);
-void kirkwood_xor1_init(void);
 
+extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
 
 
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index a14c2948c62..5505d583775 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -11,18 +11,59 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
+#include <plat/orion_nand.h>
+#include <plat/mvsdio.h>
 #include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition db88f6281_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct resource db88f6281_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+			  KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data db88f6281_nand_data = {
+	.parts		= db88f6281_nand_parts,
+	.nr_parts	= ARRAY_SIZE(db88f6281_nand_parts),
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+	.chip_delay	= 25,
+};
+
+static struct platform_device db88f6281_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &db88f6281_nand_data,
+	},
+	.resource	= &db88f6281_nand_resource,
+	.num_resources	= 1,
+};
 
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
@@ -32,18 +73,32 @@ static struct mv_sata_platform_data db88f6281_sata_data = {
 	.n_ports	= 2,
 };
 
+static struct mvsdio_platform_data db88f6281_mvsdio_data = {
+	.gpio_write_protect	= 37,
+	.gpio_card_detect	= 38,
+};
+
+static unsigned int db88f6281_mpp_config[] __initdata = {
+	MPP37_GPIO,
+	MPP38_GPIO,
+	0
+};
+
 static void __init db88f6281_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
+	kirkwood_mpp_conf(db88f6281_mpp_config);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&db88f6281_ge00_data);
-	kirkwood_rtc_init();
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
+	kirkwood_sdio_init(&db88f6281_mvsdio_data);
+	
+	platform_device_register(&db88f6281_nand_flash);
 }
 
 static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index ada480c0e19..38c98685359 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -93,6 +93,7 @@
 #define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
 #define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
 #define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
+#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x1000)
 #define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
 #define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
 #define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
@@ -116,5 +117,7 @@
 
 #define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
 
+#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+
 
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 8510f6cfdab..23a1914c1da 100644
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -17,7 +17,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
new file mode 100644
index 00000000000..63c44934391
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-kirkwood/mpp.c
+ *
+ * MPP functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init kirkwood_variant(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+		return MPP_F6281_MASK;
+	if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
+		return MPP_F6192_MASK;
+	if (dev == MV88F6180_DEV_ID)
+		return MPP_F6180_MASK;
+
+	printk(KERN_ERR "MPP setup: unknown kirkwood variant "
+			"(dev %#x rev %#x)\n", dev, rev);
+	return 0;
+}
+
+#define MPP_CTRL(i)	(DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS	(1 + MPP_MAX/8)
+
+void __init kirkwood_mpp_conf(unsigned int *mpp_list)
+{
+	u32 mpp_ctrl[MPP_NR_REGS];
+	unsigned int variant_mask;
+	int i;
+
+	variant_mask = kirkwood_variant();
+	if (!variant_mask)
+		return;
+
+	printk(KERN_DEBUG "initial MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		mpp_ctrl[i] = readl(MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+
+	while (*mpp_list) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		int shift, gpio_mode;
+
+		if (num > MPP_MAX) {
+			printk(KERN_ERR "kirkwood_mpp_conf: invalid MPP "
+					"number (%u)\n", num);
+			continue;
+		}
+		if (!(*mpp_list & variant_mask)) {
+			printk(KERN_WARNING
+			       "kirkwood_mpp_conf: requested MPP%u config "
+			       "unavailable on this hardware\n", num);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+		mpp_ctrl[num / 8] &= ~(0xf << shift);
+		mpp_ctrl[num / 8] |= sel << shift;
+
+		gpio_mode = 0;
+		if (*mpp_list & MPP_INPUT_MASK)
+			gpio_mode |= GPIO_INPUT_OK;
+		if (*mpp_list & MPP_OUTPUT_MASK)
+			gpio_mode |= GPIO_OUTPUT_OK;
+		if (sel != 0)
+			gpio_mode = 0;
+		orion_gpio_set_valid(num, gpio_mode);
+
+		mpp_list++;
+	}
+
+	printk(KERN_DEBUG "  final MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		writel(mpp_ctrl[i], MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
new file mode 100644
index 00000000000..e021a80c2ca
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -0,0 +1,303 @@
+/*
+ * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
+ *
+ * Copyright 2009: Marvell Technology Group Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __KIRKWOOD_MPP_H
+#define __KIRKWOOD_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+	/* MPP number */		((_num) & 0xff) | \
+	/* MPP select value */		(((_sel) & 0xf) << 8) | \
+	/* may be input signal */	((!!(_in)) << 12) | \
+	/* may be output signal */	((!!(_out)) << 13) | \
+	/* available on F6180 */	((!!(_F6180)) << 14) | \
+	/* available on F6190 */	((!!(_F6190)) << 15) | \
+	/* available on F6192 */	((!!(_F6192)) << 16) | \
+	/* available on F6281 */	((!!(_F6281)) << 17))
+
+#define MPP_NUM(x)	((x) & 0xff)
+#define MPP_SEL(x)	(((x) >> 8) & 0xf)
+
+				/*   num sel  i  o  6180 6190 6192 6281 */
+
+#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0    )
+#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0    )
+
+#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0    )
+#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0    )
+#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0    )
+#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1    )
+
+#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1    )
+
+#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1    )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1    )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1    )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,    1,  1,   1    )
+#define MPP8_TW_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1    )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1    )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP9_TW_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1    )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1    )
+
+#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1    )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1    )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1    )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1    )
+
+#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1    )
+
+#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1    )
+
+#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1    )
+
+#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1    )
+
+#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP20_GE1_0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP20_AUDIO_SPDIFI	MPP( 20, 0x4, 1, 0, 0,   0,   1,   1    )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1    )
+
+#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP21_GE1_1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP21_AUDIO_SPDIFO	MPP( 21, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP22_GE1_2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP22_AUDIO_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1    )
+
+#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP23_GE1_3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP23_AUDIO_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP24_TDM_SPI_CS0	DEV( 24, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP24_GE1_4		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP24_AUDIO_I2SDO	MPP( 24, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP25_GE1_5		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP25_AUDIO_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP26_GE1_6		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP26_AUDIO_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP27_GE1_7		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP27_AUDIO_I2SDI	MPP( 27, 0x4, 1, 0, 0,   0,   1,   1    )
+
+#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1    )
+#define MPP28_GE1_8		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP28_AUDIO_EXTCLK	MPP( 28, 0x4, 1, 0, 0,   0,   1,   1    )
+
+#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1    )
+#define MPP29_GE1_9		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1    )
+#define MPP30_GE1_10		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1    )
+#define MPP31_GE1_11		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP32_GE1_12		MPP( 32, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP33_GPIO		MPP( 33, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP33_GE1_13		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP34_GE1_14		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP35_GE1_15		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1    )
+
+#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP36_AUDIO_SPDIFI	MPP( 36, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP37_AUDIO_SPDIFO	MPP( 37, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP38_AUDIO_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP39_AUDIO_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP40_AUDIO_I2SDO	MPP( 40, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1    )
+#define MPP41_AUDIO_I2SLRC	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP42_AUDIO_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1    )
+#define MPP43_AUDIO_I2SDI	MPP( 43, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1    )
+#define MPP44_AUDIO_EXTCLK	MPP( 44, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1    )
+
+#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1    )
+
+#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1    )
+
+#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+
+#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1    )
+
+#define MPP_MAX			49
+
+void kirkwood_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index b1d1a87a682..2f0e4ef3db0 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -11,11 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/flash.h>
@@ -23,7 +20,6 @@
 #include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 
@@ -61,14 +57,11 @@ static void __init rd88f6192_init(void)
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
-	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6192_sata_data);
 	spi_register_board_info(rd88F6192_spi_slave_info,
 				ARRAY_SIZE(rd88F6192_spi_slave_info));
 	kirkwood_spi_init();
 	kirkwood_uart0_init();
-	kirkwood_xor0_init();
-	kirkwood_xor1_init();
 }
 
 static int __init rd88f6192_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9a0e905d10c..c3deea5e3ca 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -11,21 +11,20 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/irq.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
 #include <plat/orion_nand.h>
 #include "common.h"
+#include "mpp.h"
 
 static struct mtd_partition rd88f6281_nand_parts[] = {
 	{
@@ -91,6 +90,15 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 	.n_ports	= 2,
 };
 
+static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
+	.gpio_card_detect = 28,
+};
+
+static unsigned int rd88f6281_mpp_config[] __initdata = {
+	MPP28_GPIO,
+	0
+};
+
 static void __init rd88f6281_init(void)
 {
 	u32 dev, rev;
@@ -99,6 +107,7 @@ static void __init rd88f6281_init(void)
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
+	kirkwood_mpp_conf(rd88f6281_mpp_config);
 
 	kirkwood_ehci_init();
 
@@ -112,8 +121,8 @@ static void __init rd88f6281_init(void)
 	}
 	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
 
-	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
+	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
 	kirkwood_uart0_init();
 
 	platform_device_register(&rd88f6281_nand_flash);
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
new file mode 100644
index 00000000000..831e4a56cae
--- /dev/null
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -0,0 +1,136 @@
+/*
+ * arch/arm/mach-kirkwood/sheevaplug-setup.c
+ *
+ * Marvell SheevaPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include <plat/orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition sheevaplug_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct resource sheevaplug_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+			  KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data sheevaplug_nand_data = {
+	.parts		= sheevaplug_nand_parts,
+	.nr_parts	= ARRAY_SIZE(sheevaplug_nand_parts),
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+	.chip_delay	= 25,
+};
+
+static struct platform_device sheevaplug_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sheevaplug_nand_data,
+	},
+	.resource	= &sheevaplug_nand_resource,
+	.num_resources	= 1,
+};
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
+	// unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led sheevaplug_led_pins[] = {
+	{
+		.name			= "plug:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 49,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data sheevaplug_led_data = {
+	.leds		= sheevaplug_led_pins,
+	.num_leds	= ARRAY_SIZE(sheevaplug_led_pins),
+};
+
+static struct platform_device sheevaplug_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &sheevaplug_led_data,
+	}
+};
+
+static unsigned int sheevaplug_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP49_GPIO,	/* LED */
+	0
+};
+
+static void __init sheevaplug_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+	kirkwood_uart0_init();
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&sheevaplug_ge00_data);
+	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+	platform_device_register(&sheevaplug_nand_flash);
+	platform_device_register(&sheevaplug_leds);
+}
+
+MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
+	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= sheevaplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
new file mode 100644
index 00000000000..dda5743cf3e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -0,0 +1,220 @@
+/*
+ *
+ * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include <linux/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+static struct mtd_partition qnap_ts219_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00900000,
+		.offset		= 0x00400000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00300000,
+		.offset		= 0x00d00000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00040000,
+		.offset		= 0x00080000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00140000,
+		.offset		= 0x000c0000,
+	},
+};
+
+static const struct flash_platform_data qnap_ts219_flash = {
+	.type		= "m25p128",
+	.name		= "spi_flash",
+	.parts		= qnap_ts219_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_ts219_partitions),
+};
+
+static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &qnap_ts219_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts219_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 15,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 16,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts219_button_data = {
+	.buttons	= qnap_ts219_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts219_buttons),
+};
+
+static struct platform_device qnap_ts219_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts219_button_data,
+	}
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_GPIO,		/* USB Copy button */
+	MPP16_GPIO,		/* Reset button */
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP22_SATA1_PRESENTn,
+	MPP23_SATA0_PRESENTn,
+	0
+};
+
+
+/*****************************************************************************
+ * QNAP TS-x19 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_ts219_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
+static void __init qnap_ts219_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	spi_register_board_info(qnap_ts219_spi_slave_info,
+				ARRAY_SIZE(qnap_ts219_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+	kirkwood_ge00_init(&qnap_ts219_ge00_data);
+	kirkwood_sata_init(&qnap_ts219_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts219_button_device);
+
+	pm_power_off = qnap_ts219_power_off;
+
+}
+
+MACHINE_START(TS219, "QNAP TS-119/TS-219")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= qnap_ts219_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index 2754daabda5..fe0c82e30b2 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -14,6 +14,12 @@ config MACH_DSM320
 	  Say 'Y' here if you want your kernel to run on the D-Link
 	  DSM-320 Wireless Media Player.
 
+config MACH_ACS5K
+	bool "Brivo Systems LLC, ACS-5000 Master board"
+	help
+	  say 'Y' here if you want your kernel to run on the Brivo
+	  Systems LLC, ACS-5000 Master board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index f735d2cc029..7e3e8160ed3 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_LEDS)		+= leds.o
 # Board-specific support
 obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
 obj-$(CONFIG_MACH_DSM320)	+= board-dsm320.o
+obj-$(CONFIG_MACH_ACS5K)	+= board-acs5k.o
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
new file mode 100644
index 00000000000..9e3e5a640ad
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -0,0 +1,233 @@
+/*
+ * arch/arm/mach-ks8695/board-acs5k.c
+ *
+ * Brivo Systems LLC, ACS-5000 Master Board
+ *
+ * Copyright 2008 Simtec Electronics
+ *		  Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/devices.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
+	.sda_pin	= 4,
+	.scl_pin	= 5,
+	.udelay		= 10,
+};
+
+static struct platform_device acs5k_i2c_device = {
+	.name		= "i2c-gpio",
+	.id		= -1,
+	.num_resources	= 0,
+	.resource	= NULL,
+	.dev		= {
+		.platform_data	= &acs5k_i2c_device_platdata,
+	},
+};
+
+static int acs5k_pca9555_setup(struct i2c_client *client,
+			       unsigned gpio_base, unsigned ngpio,
+			       void *context)
+{
+	static int acs5k_gpio_value[] = {
+		-1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
+	};
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
+		gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
+		if (acs5k_gpio_value[n] < 0)
+			gpio_direction_input(gpio_base + n);
+		else
+			gpio_direction_output(gpio_base + n,
+					      acs5k_gpio_value[n]);
+		gpio_export(gpio_base + n, 0); /* Export, direction locked down */
+	}
+
+	return 0;
+}
+
+static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
+	.gpio_base	= 16, /* Start directly after the CPU's GPIO */
+	.invert		= 0, /* Do not invert */
+	.setup		= acs5k_pca9555_setup,
+};
+
+static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+	{
+		I2C_BOARD_INFO("pca9555", 0x20),
+		.platform_data = &acs5k_i2c_pca9555_platdata,
+	},
+};
+
+static void __devinit acs5k_i2c_init(void)
+{
+	/* The gpio interface */
+	platform_device_register(&acs5k_i2c_device);
+	/* I2C devices */
+	i2c_register_board_info(0, acs5k_i2c_devs,
+				ARRAY_SIZE(acs5k_i2c_devs));
+}
+
+static struct mtd_partition acs5k_nor_partitions[] = {
+	[0] = {
+		.name	= "Boot Agent and config",
+		.size	= SZ_256K,
+		.offset	= 0,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	[1] = {
+		.name	= "Kernel",
+		.size	= SZ_1M,
+		.offset	= SZ_256K,
+	},
+	[2] = {
+		.name	= "SquashFS1",
+		.size	= SZ_2M,
+		.offset	= SZ_256K + SZ_1M,
+	},
+	[3] = {
+		.name	= "SquashFS2",
+		.size	= SZ_4M + SZ_2M,
+		.offset	= SZ_256K + SZ_1M + SZ_2M,
+	},
+	[4] = {
+		.name	= "Data",
+		.size	= SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
+		.offset	= SZ_256K + SZ_8M + SZ_1M,
+	}
+};
+
+static struct physmap_flash_data acs5k_nor_pdata = {
+	.width		= 4,
+	.nr_parts	= ARRAY_SIZE(acs5k_nor_partitions),
+	.parts		= acs5k_nor_partitions,
+};
+
+static struct resource acs5k_nor_resource[] = {
+	[0] = {
+		.start = SZ_32M, /* We expect the bootloader to map
+				  * the flash here.
+				  */
+		.end   = SZ_32M + SZ_16M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SZ_32M + SZ_16M,
+		.end   = SZ_32M + SZ_32M - SZ_256K - 1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device acs5k_device_nor = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(acs5k_nor_resource),
+	.resource	= acs5k_nor_resource,
+	.dev		= {
+		.platform_data = &acs5k_nor_pdata,
+	},
+};
+
+static void __init acs5k_register_nor(void)
+{
+	int ret;
+
+	if (acs5k_nor_partitions[0].mask_flags == 0)
+		printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
+
+	ret = platform_device_register(&acs5k_device_nor);
+	if (ret < 0)
+		printk(KERN_ERR "failed to register physmap-flash device\n");
+}
+
+static int __init acs5k_protection_setup(char *s)
+{
+	/* We can't allocate anything here but we should be able
+	 * to trivially parse s and decide if we can protect the
+	 * bootloader partition or not
+	 */
+	if (strcmp(s, "no") == 0)
+		acs5k_nor_partitions[0].mask_flags = 0;
+
+	return 1;
+}
+
+__setup("protect_bootloader=", acs5k_protection_setup);
+
+static void __init acs5k_init_gpio(void)
+{
+	int i;
+
+	ks8695_register_gpios();
+	for (i = 0; i < 4; ++i)
+		gpio_request(i, "ACS5K IRQ");
+	gpio_request(7, "ACS5K KS_FRDY");
+	for (i = 8; i < 16; ++i)
+		gpio_request(i, "ACS5K Unused");
+
+	gpio_request(3, "ACS5K CAN Control");
+	gpio_request(6, "ACS5K Heartbeat");
+	gpio_direction_output(3, 1); /* Default CAN_RESET high */
+	gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
+	gpio_export(3, 0); /* export CAN_RESET as output only */
+	gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
+}
+
+static void __init acs5k_init(void)
+{
+	acs5k_init_gpio();
+
+	/* Network device */
+	ks8695_add_device_lan();	/* eth0 = LAN */
+	ks8695_add_device_wan();	/* ethX = WAN */
+
+	/* NOR devices */
+	acs5k_register_nor();
+
+	/* I2C bus */
+	acs5k_i2c_init();
+}
+
+MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
+	/* Maintainer: Simtec Electronics. */
+	.phys_io	= KS8695_IO_PA,
+	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
+	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= acs5k_init,
+	.timer		= &ks8695_timer,
+MACHINE_END
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 6d5887cf574..76e5308685a 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -35,7 +35,11 @@ extern struct bus_type platform_bus_type;
 					__phys_to_virt(x) : __bus_to_virt(x)); })
 #define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
 					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
+#define __arch_page_to_dma(dev, x)	\
+	({ dma_addr_t __dma = page_to_phys(page); \
+	   if (!is_lbus_device(dev)) \
+		__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
+	   __dma; })
 
 #endif
 
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index 5a9b032bdbe..fb1dda9be2d 100644
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -27,7 +27,7 @@ static void arch_idle(void)
 
 }
 
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
 {
 	unsigned int reg;
 
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
index 5272abee0d0..e0dd3b6ae4a 100644
--- a/arch/arm/mach-l7200/include/mach/system.h
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -19,7 +19,7 @@ static inline void arch_idle(void)
 	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if (mode == 's') {
 		cpu_reset(0);
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
index fa46bb1ef07..45a56d3b93d 100644
--- a/arch/arm/mach-lh7a40x/include/mach/system.h
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -13,7 +13,7 @@ static inline void arch_idle(void)
 	cpu_do_idle ();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset (0);
 }
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
index 8db1147d4ec..c1de36fe9b3 100644
--- a/arch/arm/mach-loki/include/mach/system.h
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -17,7 +17,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
new file mode 100644
index 00000000000..c6a564fc4a7
--- /dev/null
+++ b/arch/arm/mach-mmp/Kconfig
@@ -0,0 +1,47 @@
+if ARCH_MMP
+
+menu "Marvell PXA168/910 Implmentations"
+
+config MACH_ASPENITE
+	bool "Marvell's PXA168 Aspenite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Aspenite Development Board.
+
+config MACH_ZYLONITE2
+	bool "Marvell's PXA168 Zylonite2 Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Zylonite2 Development Board.
+
+config MACH_TAVOREVB
+	bool "Marvell's PXA910 TavorEVB Development Board"
+	select CPU_PXA910
+	help
+	  Say 'Y' here if you want to support the Marvell PXA910-based
+	  TavorEVB Development Board.
+
+config MACH_TTC_DKB
+	bool "Marvell's PXA910 TavorEVB Development Board"
+	select CPU_PXA910
+	help
+	  Say 'Y' here if you want to support the Marvell PXA910-based
+	  TTC_DKB Development Board.
+
+endmenu
+
+config CPU_PXA168
+	bool
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA168
+
+config CPU_PXA910
+	bool
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA910
+
+endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
new file mode 100644
index 00000000000..6883e658488
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for Marvell's PXA168 processors line
+#
+
+obj-y				+= common.o clock.o devices.o irq.o time.o
+
+# SoC support
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
+
+# board support
+obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
+obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot
new file mode 100644
index 00000000000..574a4aa8321
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile.boot
@@ -0,0 +1 @@
+   zreladdr-y	:= 0x00008000
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
new file mode 100644
index 00000000000..4562452d407
--- /dev/null
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -0,0 +1,117 @@
+/*
+ *  linux/arch/arm/mach-mmp/aspenite.c
+ *
+ *  Support for the Marvell PXA168-based Aspenite and Zylonite2
+ *  Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long common_pin_config[] __initdata = {
+	/* Data Flash Interface */
+	GPIO0_DFI_D15,
+	GPIO1_DFI_D14,
+	GPIO2_DFI_D13,
+	GPIO3_DFI_D12,
+	GPIO4_DFI_D11,
+	GPIO5_DFI_D10,
+	GPIO6_DFI_D9,
+	GPIO7_DFI_D8,
+	GPIO8_DFI_D7,
+	GPIO9_DFI_D6,
+	GPIO10_DFI_D5,
+	GPIO11_DFI_D4,
+	GPIO12_DFI_D3,
+	GPIO13_DFI_D2,
+	GPIO14_DFI_D1,
+	GPIO15_DFI_D0,
+
+	/* Static Memory Controller */
+	GPIO18_SMC_nCS0,
+	GPIO34_SMC_nCS1,
+	GPIO23_SMC_nLUA,
+	GPIO25_SMC_nLLA,
+	GPIO28_SMC_RDY,
+	GPIO29_SMC_SCLK,
+	GPIO35_SMC_BE1,
+	GPIO36_SMC_BE2,
+	GPIO27_GPIO,	/* Ethernet IRQ */
+
+	/* UART1 */
+	GPIO107_UART1_RXD,
+	GPIO108_UART1_TXD,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= SMC_CS1_PHYS_BASE + 0x300,
+		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(27),
+		.end	= gpio_to_irq(27),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static void __init common_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+	/* on-chip devices */
+	pxa168_add_uart(1);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = common_init,
+MACHINE_END
+
+MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = common_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
new file mode 100644
index 00000000000..2d9cc5a7122
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.c
@@ -0,0 +1,83 @@
+/*
+ *  linux/arch/arm/mach-mmp/clock.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-apbc.h>
+#include "clock.h"
+
+static void apbc_clk_enable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void apbc_clk_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apbc_clk_ops = {
+	.enable		= apbc_clk_enable,
+	.disable	= apbc_clk_disable,
+};
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->enabled++ == 0)
+		clk->ops->enable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (--clk->enabled == 0)
+		clk->ops->disable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+
+	if (clk->ops->getrate)
+		rate = clk->ops->getrate(clk);
+	else
+		rate = clk->rate;
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
new file mode 100644
index 00000000000..ed967e78e6a
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.h
@@ -0,0 +1,71 @@
+/*
+ *  linux/arch/arm/mach-mmp/clock.h
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <asm/clkdev.h>
+
+struct clkops {
+	void			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+	unsigned long		(*getrate)(struct clk *);
+};
+
+struct clk {
+	const struct clkops	*ops;
+
+	void __iomem	*clk_rst;	/* clock reset control register */
+	int		fnclksel;	/* functional clock select (APBC) */
+	uint32_t	enable_val;	/* value for clock enable (APMU) */
+	unsigned long	rate;
+	int		enabled;
+};
+
+extern struct clkops apbc_clk_ops;
+
+#define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.fnclksel	= _fnclksel,			\
+		.rate		= _rate,			\
+		.ops		= &apbc_clk_ops,		\
+}
+
+#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops)	\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.fnclksel	= _fnclksel,			\
+		.rate		= _rate,			\
+		.ops		= _ops,				\
+}
+
+#define APMU_CLK(_name, _reg, _eval, _rate)			\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.enable_val	= _eval,			\
+		.rate		= _rate,			\
+		.ops		= &apmu_clk_ops,		\
+}
+
+#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops)		\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.enable_val	= _eval,			\
+		.rate		= _rate,			\
+		.ops		= _ops,				\
+}
+
+#define INIT_CLKREG(_clk, _devname, _conname)			\
+	{							\
+		.clk		= _clk,				\
+		.dev_id		= _devname,			\
+		.con_id		= _conname,			\
+	}
+
+extern struct clk clk_pxa168_gpio;
+extern struct clk clk_pxa168_timers;
+
+extern void clks_register(struct clk_lookup *, size_t);
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
new file mode 100644
index 00000000000..e1e66c18b44
--- /dev/null
+++ b/arch/arm/mach-mmp/common.c
@@ -0,0 +1,37 @@
+/*
+ *  linux/arch/arm/mach-mmp/common.c
+ *
+ *  Code common to PXA168 processor lines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static struct map_desc standard_io_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
+		.virtual	= APB_VIRT_BASE,
+		.length		= APB_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.pfn		= __phys_to_pfn(AXI_PHYS_BASE),
+		.virtual	= AXI_VIRT_BASE,
+		.length		= AXI_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init pxa_map_io(void)
+{
+	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
new file mode 100644
index 00000000000..c33fbbc4941
--- /dev/null
+++ b/arch/arm/mach-mmp/common.h
@@ -0,0 +1,13 @@
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+struct sys_timer;
+
+extern void timer_init(int irq);
+
+extern struct sys_timer pxa168_timer;
+extern struct sys_timer pxa910_timer;
+extern void __init pxa168_init_irq(void);
+extern void __init pxa910_init_irq(void);
+
+extern void __init icu_init_irq(void);
+extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
new file mode 100644
index 00000000000..191d9dea873
--- /dev/null
+++ b/arch/arm/mach-mmp/devices.c
@@ -0,0 +1,69 @@
+/*
+ * linux/arch/arm/mach-mmp/devices.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <mach/devices.h>
+
+int __init pxa_register_device(struct pxa_device_desc *desc,
+				void *data, size_t size)
+{
+	struct platform_device *pdev;
+	struct resource res[2 + MAX_RESOURCE_DMA];
+	int i, ret = 0, nres = 0;
+
+	pdev = platform_device_alloc(desc->drv_name, desc->id);
+	if (pdev == NULL)
+		return -ENOMEM;
+
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	memset(res, 0, sizeof(res));
+
+	if (desc->start != -1ul && desc->size > 0) {
+		res[nres].start	= desc->start;
+		res[nres].end	= desc->start + desc->size - 1;
+		res[nres].flags	= IORESOURCE_MEM;
+		nres++;
+	}
+
+	if (desc->irq != NO_IRQ) {
+		res[nres].start	= desc->irq;
+		res[nres].end	= desc->irq;
+		res[nres].flags	= IORESOURCE_IRQ;
+		nres++;
+	}
+
+	for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
+		if (desc->dma[i] == 0)
+			break;
+
+		res[nres].start	= desc->dma[i];
+		res[nres].end	= desc->dma[i];
+		res[nres].flags	= IORESOURCE_DMA;
+	}
+
+	ret = platform_device_add_resources(pdev, res, nres);
+	if (ret) {
+		platform_device_put(pdev);
+		return ret;
+	}
+
+	if (data && size) {
+		ret = platform_device_add_data(pdev, data, size);
+		if (ret) {
+			platform_device_put(pdev);
+			return ret;
+		}
+	}
+
+	return platform_device_add(pdev);
+}
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
new file mode 100644
index 00000000000..3254089a644
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/addr-map.h
+ *
+ *   Common address map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/* APB - Application Subsystem Peripheral Bus
+ *
+ * NOTE: the DMA controller registers are actually on the AXI fabric #1
+ * slave port to AHB/APB bridge, due to its close relationship to those
+ * peripherals on APB, let's count it into the ABP mapping area.
+ */
+#define APB_PHYS_BASE		0xd4000000
+#define APB_VIRT_BASE		0xfe000000
+#define APB_PHYS_SIZE		0x00200000
+
+#define AXI_PHYS_BASE		0xd4200000
+#define AXI_VIRT_BASE		0xfe200000
+#define AXI_PHYS_SIZE		0x00200000
+
+/* Static Memory Controller - Chip Select 0 and 1 */
+#define SMC_CS0_PHYS_BASE	0x80000000
+#define SMC_CS0_PHYS_SIZE	0x10000000
+#define SMC_CS1_PHYS_BASE	0x90000000
+#define SMC_CS1_PHYS_SIZE	0x10000000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/include/mach/clkdev.h b/arch/arm/mach-mmp/include/mach/clkdev.h
new file mode 100644
index 00000000000..2fb354e54e0
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
new file mode 100644
index 00000000000..25e797b0908
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_CPUTYPE_H
+#define __ASM_MACH_CPUTYPE_H
+
+#include <asm/cputype.h>
+
+/*
+ *  CPU   Stepping   OLD_ID       CPU_ID      CHIP_ID
+ *
+ * PXA168    A0    0x41159263   0x56158400   0x00A0A333
+ * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
+ */
+
+#ifdef CONFIG_CPU_PXA168
+#  define __cpu_is_pxa168(id)	\
+	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+#else
+#  define __cpu_is_pxa168(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA910
+#  define __cpu_is_pxa910(id)	\
+	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+#else
+#  define __cpu_is_pxa910(id)	(0)
+#endif
+
+#define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
+#define cpu_is_pxa910()		({ __cpu_is_pxa910(read_cpuid_id()); })
+
+#endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
new file mode 100644
index 00000000000..a850f87de51
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-mmp/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copied from arch/arm/mach-pxa/include/mach/debug.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/addr-map.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =APB_PHYS_BASE		@ physical
+		ldrne	\rx, =APB_VIRT_BASE		@ virtual
+		orr	\rx, \rx, #0x00017000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
new file mode 100644
index 00000000000..24585397217
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -0,0 +1,37 @@
+#include <linux/types.h>
+
+#define MAX_RESOURCE_DMA	2
+
+/* structure for describing the on-chip devices */
+struct pxa_device_desc {
+	const char	*dev_name;
+	const char	*drv_name;
+	int		id;
+	int		irq;
+	unsigned long	start;
+	unsigned long	size;
+	int		dma[MAX_RESOURCE_DMA];
+};
+
+#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
+struct pxa_device_desc pxa168_device_##_name __initdata = {		\
+	.dev_name	= "pxa168-" #_name,				\
+	.drv_name	= _drv,						\
+	.id		= _id,						\
+	.irq		= IRQ_PXA168_##_irq,				\
+	.start		= _start,					\
+	.size		= _size,					\
+	.dma		= { _dma },					\
+};
+
+#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
+struct pxa_device_desc pxa910_device_##_name __initdata = {		\
+	.dev_name	= "pxa910-" #_name,				\
+	.drv_name	= _drv,						\
+	.id		= _id,						\
+	.irq		= IRQ_PXA910_##_irq,				\
+	.start		= _start,					\
+	.size		= _size,					\
+	.dma		= { _dma },					\
+};
+extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h
new file mode 100644
index 00000000000..1d6914544da
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/dma.h
@@ -0,0 +1,13 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/dma.h
+ */
+
+#ifndef __ASM_MACH_DMA_H
+#define __ASM_MACH_DMA_H
+
+#include <mach/addr-map.h>
+
+#define DMAC_REGS_VIRT	(APB_VIRT_BASE + 0x00000)
+
+#include <plat/dma.h>
+#endif /* __ASM_MACH_DMA_H */
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
new file mode 100644
index 00000000000..6d3cd35478b
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-icu.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =ICU_AP_IRQ_SEL_INT_NUM
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\tmp, [\base, #0]
+	and	\irqnr, \tmp, #0x3f
+	tst	\tmp, #(1 << 6)
+	.endm
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
new file mode 100644
index 00000000000..ab26d13295c
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_MACH_GPIO_H
+#define __ASM_MACH_GPIO_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+#include <asm-generic/gpio.h>
+
+#define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x)	(*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+
+#define NR_BUILTIN_GPIO	(128)
+
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+#define gpio_to_irq(gpio)	(IRQ_GPIO_START + (gpio))
+#define irq_to_gpio(irq)	((irq) - IRQ_GPIO_START)
+
+
+#define __gpio_is_inverted(gpio)	(0)
+#define __gpio_is_occupied(gpio)	(0)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio)	(1 << ((gpio) & 0x1f))
+
+#define GPLR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio.h>
+#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h
new file mode 100644
index 00000000000..99264a5ce5e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/hardware.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-mmp/include/mach/io.h b/arch/arm/mach-mmp/include/mach/io.h
new file mode 100644
index 00000000000..e7adf3d012c
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/io.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
new file mode 100644
index 00000000000..e83e45ebf7a
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -0,0 +1,119 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+/*
+ * Interrupt numbers for PXA168
+ */
+#define IRQ_PXA168_NONE			(-1)
+#define IRQ_PXA168_SSP3			0
+#define IRQ_PXA168_SSP2			1
+#define IRQ_PXA168_SSP1			2
+#define IRQ_PXA168_SSP0			3
+#define IRQ_PXA168_PMIC_INT		4
+#define IRQ_PXA168_RTC_INT		5
+#define IRQ_PXA168_RTC_ALARM		6
+#define IRQ_PXA168_TWSI0		7
+#define IRQ_PXA168_GPU			8
+#define IRQ_PXA168_KEYPAD		9
+#define IRQ_PXA168_ONEWIRE		12
+#define IRQ_PXA168_TIMER1		13
+#define IRQ_PXA168_TIMER2		14
+#define IRQ_PXA168_TIMER3		15
+#define IRQ_PXA168_CMU			16
+#define IRQ_PXA168_SSP4			17
+#define IRQ_PXA168_MSP_WAKEUP		19
+#define IRQ_PXA168_CF_WAKEUP		20
+#define IRQ_PXA168_XD_WAKEUP		21
+#define IRQ_PXA168_MFU			22
+#define IRQ_PXA168_MSP			23
+#define IRQ_PXA168_CF			24
+#define IRQ_PXA168_XD			25
+#define IRQ_PXA168_DDR_INT		26
+#define IRQ_PXA168_UART1		27
+#define IRQ_PXA168_UART2		28
+#define IRQ_PXA168_WDT			35
+#define IRQ_PXA168_FRQ_CHANGE		38
+#define IRQ_PXA168_SDH1			39
+#define IRQ_PXA168_SDH2			40
+#define IRQ_PXA168_LCD			41
+#define IRQ_PXA168_CI			42
+#define IRQ_PXA168_USB1			44
+#define IRQ_PXA168_NAND			45
+#define IRQ_PXA168_HIFI_DMA		46
+#define IRQ_PXA168_DMA_INT0		47
+#define IRQ_PXA168_DMA_INT1		48
+#define IRQ_PXA168_GPIOX		49
+#define IRQ_PXA168_USB2			51
+#define IRQ_PXA168_AC97			57
+#define IRQ_PXA168_TWSI1		58
+#define IRQ_PXA168_PMU			60
+#define IRQ_PXA168_SM_INT		63
+
+/*
+ * Interrupt numbers for PXA910
+ */
+#define IRQ_PXA910_AIRQ			0
+#define IRQ_PXA910_SSP3			1
+#define IRQ_PXA910_SSP2			2
+#define IRQ_PXA910_SSP1			3
+#define IRQ_PXA910_PMIC_INT		4
+#define IRQ_PXA910_RTC_INT		5
+#define IRQ_PXA910_RTC_ALARM		6
+#define IRQ_PXA910_TWSI0		7
+#define IRQ_PXA910_GPU			8
+#define IRQ_PXA910_KEYPAD		9
+#define IRQ_PXA910_ROTARY		10
+#define IRQ_PXA910_TRACKBALL		11
+#define IRQ_PXA910_ONEWIRE		12
+#define IRQ_PXA910_AP1_TIMER1		13
+#define IRQ_PXA910_AP1_TIMER2		14
+#define IRQ_PXA910_AP1_TIMER3		15
+#define IRQ_PXA910_IPC_AP0		16
+#define IRQ_PXA910_IPC_AP1		17
+#define IRQ_PXA910_IPC_AP2		18
+#define IRQ_PXA910_IPC_AP3		19
+#define IRQ_PXA910_IPC_AP4		20
+#define IRQ_PXA910_IPC_CP0		21
+#define IRQ_PXA910_IPC_CP1		22
+#define IRQ_PXA910_IPC_CP2		23
+#define IRQ_PXA910_IPC_CP3		24
+#define IRQ_PXA910_IPC_CP4		25
+#define IRQ_PXA910_L2_DDR		26
+#define IRQ_PXA910_UART2		27
+#define IRQ_PXA910_UART3		28
+#define IRQ_PXA910_AP2_TIMER1		29
+#define IRQ_PXA910_AP2_TIMER2		30
+#define IRQ_PXA910_CP2_TIMER1		31
+#define IRQ_PXA910_CP2_TIMER2		32
+#define IRQ_PXA910_CP2_TIMER3		33
+#define IRQ_PXA910_GSSP			34
+#define IRQ_PXA910_CP2_WDT		35
+#define IRQ_PXA910_MAIN_PMU		36
+#define IRQ_PXA910_CP_FREQ_CHG		37
+#define IRQ_PXA910_AP_FREQ_CHG		38
+#define IRQ_PXA910_MMC			39
+#define IRQ_PXA910_AEU			40
+#define IRQ_PXA910_LCD			41
+#define IRQ_PXA910_CCIC			42
+#define IRQ_PXA910_IRE			43
+#define IRQ_PXA910_USB1			44
+#define IRQ_PXA910_NAND			45
+#define IRQ_PXA910_HIFI_DMA		46
+#define IRQ_PXA910_DMA_INT0		47
+#define IRQ_PXA910_DMA_INT1		48
+#define IRQ_PXA910_AP_GPIO		49
+#define IRQ_PXA910_AP2_TIMER3		50
+#define IRQ_PXA910_USB2			51
+#define IRQ_PXA910_TWSI1		54
+#define IRQ_PXA910_CP_GPIO		55
+#define IRQ_PXA910_UART1		59	/* Slow UART */
+#define IRQ_PXA910_AP_PMU		60
+#define IRQ_PXA910_SM_INT		63	/* from PinMux */
+
+#define IRQ_GPIO_START			64
+#define IRQ_GPIO_NUM			128
+#define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
+
+#define NR_IRQS		(IRQ_GPIO_START + IRQ_GPIO_NUM)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
new file mode 100644
index 00000000000..bdb21d70714
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
new file mode 100644
index 00000000000..d0bdb6e3682
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -0,0 +1,258 @@
+#ifndef __ASM_MACH_MFP_PXA168_H
+#define __ASM_MACH_MFP_PXA168_H
+
+#include <mach/mfp.h>
+
+/* GPIO */
+#define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
+#define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
+#define GPIO2_GPIO		MFP_CFG(GPIO2, AF5)
+#define GPIO3_GPIO		MFP_CFG(GPIO3, AF5)
+#define GPIO4_GPIO		MFP_CFG(GPIO4, AF5)
+#define GPIO5_GPIO		MFP_CFG(GPIO5, AF5)
+#define GPIO6_GPIO		MFP_CFG(GPIO6, AF5)
+#define GPIO7_GPIO		MFP_CFG(GPIO7, AF5)
+#define GPIO8_GPIO		MFP_CFG(GPIO8, AF5)
+#define GPIO9_GPIO		MFP_CFG(GPIO9, AF5)
+#define GPIO10_GPIO		MFP_CFG(GPIO10, AF5)
+#define GPIO11_GPIO		MFP_CFG(GPIO11, AF5)
+#define GPIO12_GPIO		MFP_CFG(GPIO12, AF5)
+#define GPIO13_GPIO		MFP_CFG(GPIO13, AF5)
+#define GPIO14_GPIO		MFP_CFG(GPIO14, AF5)
+#define GPIO15_GPIO		MFP_CFG(GPIO15, AF5)
+#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO		MFP_CFG(GPIO17, AF5)
+#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO		MFP_CFG(GPIO19, AF5)
+#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO		MFP_CFG(GPIO21, AF5)
+#define GPIO22_GPIO		MFP_CFG(GPIO22, AF5)
+#define GPIO23_GPIO		MFP_CFG(GPIO23, AF5)
+#define GPIO24_GPIO		MFP_CFG(GPIO24, AF5)
+#define GPIO25_GPIO		MFP_CFG(GPIO25, AF5)
+#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO		MFP_CFG(GPIO27, AF5)
+#define GPIO28_GPIO		MFP_CFG(GPIO28, AF5)
+#define GPIO29_GPIO		MFP_CFG(GPIO29, AF5)
+#define GPIO30_GPIO		MFP_CFG(GPIO30, AF5)
+#define GPIO31_GPIO		MFP_CFG(GPIO31, AF5)
+#define GPIO32_GPIO		MFP_CFG(GPIO32, AF5)
+#define GPIO33_GPIO		MFP_CFG(GPIO33, AF5)
+#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
+
+/* DFI */
+#define GPIO0_DFI_D15		MFP_CFG(GPIO0, AF0)
+#define GPIO1_DFI_D14		MFP_CFG(GPIO1, AF0)
+#define GPIO2_DFI_D13		MFP_CFG(GPIO2, AF0)
+#define GPIO3_DFI_D12		MFP_CFG(GPIO3, AF0)
+#define GPIO4_DFI_D11		MFP_CFG(GPIO4, AF0)
+#define GPIO5_DFI_D10		MFP_CFG(GPIO5, AF0)
+#define GPIO6_DFI_D9		MFP_CFG(GPIO6, AF0)
+#define GPIO7_DFI_D8		MFP_CFG(GPIO7, AF0)
+#define GPIO8_DFI_D7		MFP_CFG(GPIO8, AF0)
+#define GPIO9_DFI_D6		MFP_CFG(GPIO9, AF0)
+#define GPIO10_DFI_D5		MFP_CFG(GPIO10, AF0)
+#define GPIO11_DFI_D4		MFP_CFG(GPIO11, AF0)
+#define GPIO12_DFI_D3		MFP_CFG(GPIO12, AF0)
+#define GPIO13_DFI_D2		MFP_CFG(GPIO13, AF0)
+#define GPIO14_DFI_D1		MFP_CFG(GPIO14, AF0)
+#define GPIO15_DFI_D0		MFP_CFG(GPIO15, AF0)
+
+#define GPIO30_DFI_ADDR0	MFP_CFG(GPIO30, AF0)
+#define GPIO31_DFI_ADDR1	MFP_CFG(GPIO31, AF0)
+#define GPIO32_DFI_ADDR2	MFP_CFG(GPIO32, AF0)
+#define GPIO33_DFI_ADDR3	MFP_CFG(GPIO33, AF0)
+
+/* NAND */
+#define GPIO16_ND_nCS0		MFP_CFG(GPIO16, AF1)
+#define GPIO17_ND_nWE		MFP_CFG(GPIO17, AF0)
+#define GPIO21_ND_ALE		MFP_CFG(GPIO21, AF0)
+#define GPIO22_ND_CLE		MFP_CFG(GPIO22, AF0)
+#define GPIO24_ND_nRE		MFP_CFG(GPIO24, AF0)
+#define GPIO26_ND_RnB1		MFP_CFG(GPIO26, AF1)
+#define GPIO27_ND_RnB2		MFP_CFG(GPIO27, AF1)
+
+/* Static Memory Controller */
+#define GPIO18_SMC_nCS0		MFP_CFG(GPIO18, AF3)
+#define GPIO18_SMC_nCS1		MFP_CFG(GPIO18, AF2)
+#define GPIO16_SMC_nCS0		MFP_CFG(GPIO16, AF2)
+#define GPIO16_SMC_nCS1		MFP_CFG(GPIO16, AF3)
+#define GPIO19_SMC_nCS0		MFP_CFG(GPIO19, AF0)
+#define GPIO20_SMC_nCS1		MFP_CFG(GPIO20, AF2)
+#define GPIO23_SMC_nLUA		MFP_CFG(GPIO23, AF0)
+#define GPIO25_SMC_nLLA		MFP_CFG(GPIO25, AF0)
+#define GPIO27_SMC_IRQ		MFP_CFG(GPIO27, AF0)
+#define GPIO28_SMC_RDY		MFP_CFG(GPIO28, AF0)
+#define GPIO29_SMC_SCLK		MFP_CFG(GPIO29, AF0)
+#define GPIO34_SMC_nCS1		MFP_CFG(GPIO34, AF2)
+#define GPIO35_SMC_BE1		MFP_CFG(GPIO35, AF2)
+#define GPIO36_SMC_BE2		MFP_CFG(GPIO36, AF2)
+
+/* Compact Flash */
+#define GPIO19_CF_nCE1		MFP_CFG(GPIO19, AF3)
+#define GPIO20_CF_nCE2		MFP_CFG(GPIO20, AF3)
+#define GPIO23_CF_nALE		MFP_CFG(GPIO23, AF3)
+#define GPIO25_CF_nRESET	MFP_CFG(GPIO25, AF3)
+#define GPIO28_CF_RDY		MFP_CFG(GPIO28, AF3)
+#define GPIO29_CF_STSCH		MFP_CFG(GPIO29, AF3)
+#define GPIO30_CF_nREG		MFP_CFG(GPIO30, AF3)
+#define GPIO31_CF_nIOIS16	MFP_CFG(GPIO31, AF3)
+#define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
+#define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
+
+/* UART1 */
+#define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
+#define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
+#define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
+#define GPIO108_UART1_TXD	MFP_CFG_DRV(GPIO108, AF2, FAST)
+#define GPIO109_UART1_CTS	MFP_CFG(GPIO109, AF1)
+#define GPIO109_UART1_RTS	MFP_CFG(GPIO109, AF2)
+#define GPIO110_UART1_RTS	MFP_CFG(GPIO110, AF1)
+#define GPIO110_UART1_CTS	MFP_CFG(GPIO110, AF2)
+#define GPIO111_UART1_RI	MFP_CFG(GPIO111, AF1)
+#define GPIO111_UART1_DSR	MFP_CFG(GPIO111, AF2)
+#define GPIO112_UART1_DTR	MFP_CFG(GPIO111, AF1)
+#define GPIO112_UART1_DCD	MFP_CFG(GPIO112, AF2)
+
+/* MMC1 */
+#define GPIO37_MMC1_DAT7	MFP_CFG(GPIO37, AF1)
+#define GPIO38_MMC1_DAT6	MFP_CFG(GPIO38, AF1)
+#define GPIO54_MMC1_DAT5	MFP_CFG(GPIO54, AF1)
+#define GPIO48_MMC1_DAT4	MFP_CFG(GPIO48, AF1)
+#define GPIO51_MMC1_DAT3	MFP_CFG(GPIO51, AF1)
+#define GPIO52_MMC1_DAT2	MFP_CFG(GPIO52, AF1)
+#define GPIO40_MMC1_DAT1	MFP_CFG(GPIO40, AF1)
+#define GPIO41_MMC1_DAT0	MFP_CFG(GPIO41, AF1)
+#define GPIO49_MMC1_CMD		MFP_CFG(GPIO49, AF1)
+#define GPIO43_MMC1_CLK		MFP_CFG(GPIO43, AF1)
+#define GPIO53_MMC1_CD		MFP_CFG(GPIO53, AF1)
+#define GPIO46_MMC1_WP		MFP_CFG(GPIO46, AF1)
+
+/* LCD */
+#define GPIO84_LCD_CS		MFP_CFG(GPIO84, AF1)
+#define GPIO60_LCD_DD0		MFP_CFG(GPIO60, AF1)
+#define GPIO61_LCD_DD1		MFP_CFG(GPIO61, AF1)
+#define GPIO70_LCD_DD10		MFP_CFG(GPIO70, AF1)
+#define GPIO71_LCD_DD11		MFP_CFG(GPIO71, AF1)
+#define GPIO72_LCD_DD12		MFP_CFG(GPIO72, AF1)
+#define GPIO73_LCD_DD13		MFP_CFG(GPIO73, AF1)
+#define GPIO74_LCD_DD14		MFP_CFG(GPIO74, AF1)
+#define GPIO75_LCD_DD15		MFP_CFG(GPIO75, AF1)
+#define GPIO76_LCD_DD16		MFP_CFG(GPIO76, AF1)
+#define GPIO77_LCD_DD17		MFP_CFG(GPIO77, AF1)
+#define GPIO78_LCD_DD18		MFP_CFG(GPIO78, AF1)
+#define GPIO79_LCD_DD19		MFP_CFG(GPIO79, AF1)
+#define GPIO62_LCD_DD2		MFP_CFG(GPIO62, AF1)
+#define GPIO80_LCD_DD20		MFP_CFG(GPIO80, AF1)
+#define GPIO81_LCD_DD21		MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_DD22		MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_DD23		MFP_CFG(GPIO83, AF1)
+#define GPIO63_LCD_DD3		MFP_CFG(GPIO63, AF1)
+#define GPIO64_LCD_DD4		MFP_CFG(GPIO64, AF1)
+#define GPIO65_LCD_DD5		MFP_CFG(GPIO65, AF1)
+#define GPIO66_LCD_DD6		MFP_CFG(GPIO66, AF1)
+#define GPIO67_LCD_DD7		MFP_CFG(GPIO67, AF1)
+#define GPIO68_LCD_DD8		MFP_CFG(GPIO68, AF1)
+#define GPIO69_LCD_DD9		MFP_CFG(GPIO69, AF1)
+#define GPIO59_LCD_DENA_BIAS	MFP_CFG(GPIO59, AF1)
+#define GPIO56_LCD_FCLK_RD	MFP_CFG(GPIO56, AF1)
+#define GPIO57_LCD_LCLK_A0	MFP_CFG(GPIO57, AF1)
+#define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
+#define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
+
+/* I2S */
+#define GPIO113_I2S_MCLK	MFP_CFG(GPIO113,AF6)
+#define GPIO114_I2S_FRM		MFP_CFG(GPIO114,AF1)
+#define GPIO115_I2S_BCLK	MFP_CFG(GPIO115,AF1)
+#define GPIO116_I2S_RXD		MFP_CFG(GPIO116,AF2)
+#define GPIO117_I2S_TXD		MFP_CFG(GPIO117,AF2)
+
+#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
new file mode 100644
index 00000000000..48a1cbc7c56
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -0,0 +1,157 @@
+#ifndef __ASM_MACH_MFP_PXA910_H
+#define __ASM_MACH_MFP_PXA910_H
+
+#include <mach/mfp.h>
+
+/* UART2 */
+#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
+#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)
+
+/* UART3 */
+#define GPIO31_UART3_RXD	MFP_CFG(GPIO31, AF4)
+#define GPIO32_UART3_TXD	MFP_CFG(GPIO32, AF4)
+
+/*IRDA*/
+#define GPIO51_IRDA_SHDN	MFP_CFG(GPIO51, AF0)
+
+/* SMC */
+#define SM_nCS0_nCS0		MFP_CFG(SM_nCS0, AF0)
+#define SM_ADV_SM_ADV		MFP_CFG(SM_ADV, AF0)
+#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
+#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
+#define SM_BE0_SM_BE0		MFP_CFG(SM_BE0, AF1)
+#define SM_BE1_SM_BE1		MFP_CFG(SM_BE1, AF1)
+
+/* I2C */
+#define GPIO53_CI2C_SCL		MFP_CFG(GPIO53, AF2)
+#define GPIO54_CI2C_SDA		MFP_CFG(GPIO54, AF2)
+
+/* SSP1 (I2S) */
+#define GPIO24_SSP1_SDATA_IN	MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
+#define GPIO21_SSP1_BITCLK	MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
+#define GPIO20_SSP1_SYSCLK	MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
+#define GPIO22_SSP1_SYNC	MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
+#define GPIO23_SSP1_DATA_OUT	MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
+#define GPIO124_MN_CLK_OUT	MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
+#define GPIO123_CLK_REQ		MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
+
+/* DFI */
+#define DF_IO0_ND_IO0		MFP_CFG(DF_IO0, AF0)
+#define DF_IO1_ND_IO1		MFP_CFG(DF_IO1, AF0)
+#define DF_IO2_ND_IO2		MFP_CFG(DF_IO2, AF0)
+#define DF_IO3_ND_IO3		MFP_CFG(DF_IO3, AF0)
+#define DF_IO4_ND_IO4		MFP_CFG(DF_IO4, AF0)
+#define DF_IO5_ND_IO5		MFP_CFG(DF_IO5, AF0)
+#define DF_IO6_ND_IO6		MFP_CFG(DF_IO6, AF0)
+#define DF_IO7_ND_IO7		MFP_CFG(DF_IO7, AF0)
+#define DF_IO8_ND_IO8		MFP_CFG(DF_IO8, AF0)
+#define DF_IO9_ND_IO9		MFP_CFG(DF_IO9, AF0)
+#define DF_IO10_ND_IO10		MFP_CFG(DF_IO10, AF0)
+#define DF_IO11_ND_IO11		MFP_CFG(DF_IO11, AF0)
+#define DF_IO12_ND_IO12		MFP_CFG(DF_IO12, AF0)
+#define DF_IO13_ND_IO13		MFP_CFG(DF_IO13, AF0)
+#define DF_IO14_ND_IO14		MFP_CFG(DF_IO14, AF0)
+#define DF_IO15_ND_IO15		MFP_CFG(DF_IO15, AF0)
+#define DF_nCS0_SM_nCS2_nCS0	MFP_CFG(DF_nCS0_SM_nCS2, AF0)
+#define DF_ALE_SM_WEn_ND_ALE	MFP_CFG(DF_ALE_SM_WEn, AF1)
+#define DF_CLE_SM_OEn_ND_CLE	MFP_CFG(DF_CLE_SM_OEn, AF0)
+#define DF_WEn_DF_WEn		MFP_CFG(DF_WEn, AF1)
+#define DF_REn_DF_REn		MFP_CFG(DF_REn, AF1)
+#define DF_RDY0_DF_RDY0		MFP_CFG(DF_RDY0, AF0)
+
+/*keypad*/
+#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
+
+/* LCD */
+#define GPIO81_LCD_FCLK		MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_LCLK		MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_PCLK		MFP_CFG(GPIO83, AF1)
+#define GPIO84_LCD_DENA		MFP_CFG(GPIO84, AF1)
+#define GPIO85_LCD_DD0		MFP_CFG(GPIO85, AF1)
+#define GPIO86_LCD_DD1		MFP_CFG(GPIO86, AF1)
+#define GPIO87_LCD_DD2		MFP_CFG(GPIO87, AF1)
+#define GPIO88_LCD_DD3		MFP_CFG(GPIO88, AF1)
+#define GPIO89_LCD_DD4		MFP_CFG(GPIO89, AF1)
+#define GPIO90_LCD_DD5		MFP_CFG(GPIO90, AF1)
+#define GPIO91_LCD_DD6		MFP_CFG(GPIO91, AF1)
+#define GPIO92_LCD_DD7		MFP_CFG(GPIO92, AF1)
+#define GPIO93_LCD_DD8		MFP_CFG(GPIO93, AF1)
+#define GPIO94_LCD_DD9		MFP_CFG(GPIO94, AF1)
+#define GPIO95_LCD_DD10		MFP_CFG(GPIO95, AF1)
+#define GPIO96_LCD_DD11		MFP_CFG(GPIO96, AF1)
+#define GPIO97_LCD_DD12		MFP_CFG(GPIO97, AF1)
+#define GPIO98_LCD_DD13		MFP_CFG(GPIO98, AF1)
+#define GPIO100_LCD_DD14	MFP_CFG(GPIO100, AF1)
+#define GPIO101_LCD_DD15	MFP_CFG(GPIO101, AF1)
+#define GPIO102_LCD_DD16	MFP_CFG(GPIO102, AF1)
+#define GPIO103_LCD_DD17	MFP_CFG(GPIO103, AF1)
+#define GPIO104_LCD_DD18	MFP_CFG(GPIO104, AF1)
+#define GPIO105_LCD_DD19	MFP_CFG(GPIO105, AF1)
+#define GPIO106_LCD_DD20	MFP_CFG(GPIO106, AF1)
+#define GPIO107_LCD_DD21	MFP_CFG(GPIO107, AF1)
+#define GPIO108_LCD_DD22	MFP_CFG(GPIO108, AF1)
+#define GPIO109_LCD_DD23	MFP_CFG(GPIO109, AF1)
+
+#define GPIO104_LCD_SPIDOUT	MFP_CFG(GPIO104, AF3)
+#define GPIO105_LCD_SPIDIN	MFP_CFG(GPIO105, AF3)
+#define GPIO107_LCD_CS1 	MFP_CFG(GPIO107, AF3)
+#define GPIO108_LCD_DCLK	MFP_CFG(GPIO108, AF3)
+
+#define GPIO106_LCD_RESET	MFP_CFG(GPIO106, AF0)
+
+/*smart panel*/
+#define GPIO82_LCD_A0		MFP_CFG(GPIO82, AF0)
+#define GPIO83_LCD_WR		MFP_CFG(GPIO83, AF0)
+#define GPIO103_LCD_CS		MFP_CFG(GPIO103, AF0)
+
+/*1wire*/
+#define GPIO106_1WIRE		MFP_CFG(GPIO106, AF3)
+
+/*CCIC*/
+#define GPIO67_CCIC_IN7		MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
+#define GPIO68_CCIC_IN6		MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
+#define GPIO69_CCIC_IN5		MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
+#define GPIO70_CCIC_IN4		MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
+#define GPIO71_CCIC_IN3		MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
+#define GPIO72_CCIC_IN2		MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
+#define GPIO73_CCIC_IN1		MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
+#define GPIO74_CCIC_IN0		MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
+#define GPIO75_CAM_HSYNC	MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
+#define GPIO76_CAM_VSYNC	MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
+#define GPIO77_CAM_MCLK		MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
+#define GPIO78_CAM_PCLK		MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
+
+/* MMC1 */
+#define MMC1_DAT7_MMC1_DAT7	MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
+#define MMC1_DAT6_MMC1_DAT6	MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
+#define MMC1_DAT5_MMC1_DAT5	MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
+#define MMC1_DAT4_MMC1_DAT4	MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
+#define MMC1_DAT3_MMC1_DAT3	MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
+#define MMC1_DAT2_MMC1_DAT2	MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
+#define MMC1_DAT1_MMC1_DAT1	MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
+#define MMC1_DAT0_MMC1_DAT0	MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
+#define MMC1_CMD_MMC1_CMD	MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
+#define MMC1_CLK_MMC1_CLK	MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
+#define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
+#define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
+
+#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h
new file mode 100644
index 00000000000..277ea4cd0f9
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_MACH_MFP_H
+#define __ASM_MACH_MFP_H
+
+#include <plat/mfp.h>
+
+/*
+ * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
+ * bit different from those on PXA3xx.  Bit [7:10] are now reserved, which
+ * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits.
+ *
+ * To cope with this difference and re-use the pxa3xx mfp code as much as
+ * possible, we make the following compromise:
+ *
+ * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
+ * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 3. Override MFP_CFG() and MFP_CFG_DRV()
+ * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
+ */
+
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x2 << 13)
+#define MFP_DRIVE_MEDIUM	(0x4 << 13)
+#define MFP_DRIVE_FAST		(0x8 << 13)
+
+#undef MFP_CFG
+#undef MFP_CFG_DRV
+#undef MFP_CFG_LPM
+#undef MFP_CFG_X
+#undef MFP_CFG_DEFAULT
+
+#define MFP_CFG(pin, af)		\
+	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
+
+#endif /* __ASM_MACH_MFP_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
new file mode 100644
index 00000000000..ef0a8a2076e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_PXA168_H
+#define __ASM_MACH_PXA168_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa168_device_uart1;
+extern struct pxa_device_desc pxa168_device_uart2;
+
+static inline int pxa168_add_uart(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_uart1; break;
+	case 2: d = &pxa168_device_uart2; break;
+	}
+
+	if (d == NULL)
+		return -EINVAL;
+
+	return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
new file mode 100644
index 00000000000..b7aeaf574c3
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_PXA910_H
+#define __ASM_MACH_PXA910_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa910_device_uart1;
+extern struct pxa_device_desc pxa910_device_uart2;
+
+static inline int pxa910_add_uart(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa910_device_uart1; break;
+	case 2: d = &pxa910_device_uart2; break;
+	}
+
+	if (d == NULL)
+		return -EINVAL;
+
+	return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
new file mode 100644
index 00000000000..c6b8c9dc202
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
+ *
+ *   Application Peripheral Bus Clock Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APBC_H
+#define __ASM_MACH_REGS_APBC_H
+
+#include <mach/addr-map.h>
+
+#define APBC_VIRT_BASE	(APB_VIRT_BASE + 0x015000)
+#define APBC_REG(x)	(APBC_VIRT_BASE + (x))
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_PXA168_UART1	APBC_REG(0x000)
+#define APBC_PXA168_UART2	APBC_REG(0x004)
+#define APBC_PXA168_GPIO	APBC_REG(0x008)
+#define APBC_PXA168_PWM0	APBC_REG(0x00c)
+#define APBC_PXA168_PWM1	APBC_REG(0x010)
+#define APBC_PXA168_SSP1	APBC_REG(0x01c)
+#define APBC_PXA168_SSP2	APBC_REG(0x020)
+#define APBC_PXA168_RTC		APBC_REG(0x028)
+#define APBC_PXA168_TWSI0	APBC_REG(0x02c)
+#define APBC_PXA168_KPC		APBC_REG(0x030)
+#define APBC_PXA168_TIMERS	APBC_REG(0x034)
+#define APBC_PXA168_AIB		APBC_REG(0x03c)
+#define APBC_PXA168_SW_JTAG	APBC_REG(0x040)
+#define APBC_PXA168_ONEWIRE	APBC_REG(0x048)
+#define APBC_PXA168_SSP3	APBC_REG(0x04c)
+#define APBC_PXA168_ASFAR	APBC_REG(0x050)
+#define APBC_PXA168_ASSAR	APBC_REG(0x054)
+#define APBC_PXA168_SSP4	APBC_REG(0x058)
+#define APBC_PXA168_SSP5	APBC_REG(0x05c)
+#define APBC_PXA168_TWSI1	APBC_REG(0x06c)
+#define APBC_PXA168_UART3	APBC_REG(0x070)
+#define APBC_PXA168_AC97	APBC_REG(0x084)
+
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_PXA910_UART0	APBC_REG(0x000)
+#define APBC_PXA910_UART1	APBC_REG(0x004)
+#define APBC_PXA910_GPIO	APBC_REG(0x008)
+#define APBC_PXA910_PWM0	APBC_REG(0x00c)
+#define APBC_PXA910_PWM1	APBC_REG(0x010)
+#define APBC_PXA910_PWM2	APBC_REG(0x014)
+#define APBC_PXA910_PWM3	APBC_REG(0x018)
+#define APBC_PXA910_SSP1	APBC_REG(0x01c)
+#define APBC_PXA910_SSP2	APBC_REG(0x020)
+#define APBC_PXA910_IPC		APBC_REG(0x024)
+#define APBC_PXA910_TWSI0	APBC_REG(0x02c)
+#define APBC_PXA910_KPC		APBC_REG(0x030)
+#define APBC_PXA910_TIMERS	APBC_REG(0x034)
+#define APBC_PXA910_TBROT	APBC_REG(0x038)
+#define APBC_PXA910_AIB		APBC_REG(0x03c)
+#define APBC_PXA910_SW_JTAG	APBC_REG(0x040)
+#define APBC_PXA910_TIMERS1	APBC_REG(0x044)
+#define APBC_PXA910_ONEWIRE	APBC_REG(0x048)
+#define APBC_PXA910_SSP3	APBC_REG(0x04c)
+#define APBC_PXA910_ASFAR	APBC_REG(0x050)
+#define APBC_PXA910_ASSAR	APBC_REG(0x054)
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
+#define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
+#define APBC_RST	(1 << 2)  /* Reset Generation */
+
+/* Functional Clock Selection Mask */
+#define APBC_FNCLKSEL(x)	(((x) & 0xf) << 4)
+
+#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
new file mode 100644
index 00000000000..91903051412
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
+ *
+ *   Application Subsystem Power Management Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APMU_H
+#define __ASM_MACH_REGS_APMU_H
+
+#include <mach/addr-map.h>
+
+#define APMU_VIRT_BASE	(AXI_VIRT_BASE + 0x82800)
+#define APMU_REG(x)	(APMU_VIRT_BASE + (x))
+
+/* Clock Reset Control */
+#define APMU_IRE	APMU_REG(0x048)
+#define APMU_LCD	APMU_REG(0x04c)
+#define APMU_CCIC	APMU_REG(0x050)
+#define APMU_SDH0	APMU_REG(0x054)
+#define APMU_SDH1	APMU_REG(0x058)
+#define APMU_USB	APMU_REG(0x05c)
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_DMA	APMU_REG(0x064)
+#define APMU_GEU	APMU_REG(0x068)
+#define APMU_BUS	APMU_REG(0x06c)
+
+#define APMU_FNCLK_EN	(1 << 4)
+#define APMU_AXICLK_EN	(1 << 3)
+#define APMU_FNRST_DIS	(1 << 1)
+#define APMU_AXIRST_DIS	(1 << 0)
+
+#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
new file mode 100644
index 00000000000..e5f08723e0c
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
+ *
+ *   Interrupt Control Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ICU_H
+#define __ASM_MACH_ICU_H
+
+#include <mach/addr-map.h>
+
+#define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
+#define ICU_REG(x)	(ICU_VIRT_BASE + (x))
+
+#define ICU_INT_CONF(n)		ICU_REG((n) << 2)
+#define ICU_INT_CONF_AP_INT	(1 << 6)
+#define ICU_INT_CONF_CP_INT	(1 << 5)
+#define ICU_INT_CONF_IRQ	(1 << 4)
+#define ICU_INT_CONF_MASK	(0xf)
+
+#define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
+#define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
+#define ICU_AP_GBL_IRQ_MSK	ICU_REG(0x114)	/* AP Global Interrupt Mask */
+#define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
+#define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
+
+#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/include/mach/regs-timers.h
new file mode 100644
index 00000000000..45589fec9fc
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-timers.h
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
+ *
+ *   Timers Module
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_TIMERS_H
+#define __ASM_MACH_REGS_TIMERS_H
+
+#include <mach/addr-map.h>
+
+#define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
+#define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
+
+#define TMR_CCR		(0x0000)
+#define TMR_TN_MM(n, m)	(0x0004 + ((n) << 3) + (((n) + (m)) << 2))
+#define TMR_CR(n)	(0x0028 + ((n) << 2))
+#define TMR_SR(n)	(0x0034 + ((n) << 2))
+#define TMR_IER(n)	(0x0040 + ((n) << 2))
+#define TMR_PLVR(n)	(0x004c + ((n) << 2))
+#define TMR_PLCR(n)	(0x0058 + ((n) << 2))
+#define TMR_WMER	(0x0064)
+#define TMR_WMR		(0x0068)
+#define TMR_WVR		(0x006c)
+#define TMR_WSR		(0x0070)
+#define TMR_ICR(n)	(0x0074 + ((n) << 2))
+#define TMR_WICR	(0x0080)
+#define TMR_CER		(0x0084)
+#define TMR_CMR		(0x0088)
+#define TMR_ILR(n)	(0x008c + ((n) << 2))
+#define TMR_WCR		(0x0098)
+#define TMR_WFAR	(0x009c)
+#define TMR_WSAR	(0x00A0)
+#define TMR_CVWR(n)	(0x00A4 + ((n) << 2))
+
+#define TMR_CCR_CS_0(x)	(((x) & 0x3) << 0)
+#define TMR_CCR_CS_1(x)	(((x) & 0x7) << 2)
+#define TMR_CCR_CS_2(x)	(((x) & 0x3) << 5)
+
+#endif /* __ASM_MACH_REGS_TIMERS_H */
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
new file mode 100644
index 00000000000..001edfefec1
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_SYSTEM_H
+#define __ASM_MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
new file mode 100644
index 00000000000..6cebbd0ca8f
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLOCK_TICK_RATE		3250000
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
new file mode 100644
index 00000000000..c93d5fa5865
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-mmp/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/addr-map.h>
+
+#define UART1_BASE	(APB_PHYS_BASE + 0x36000)
+#define UART2_BASE	(APB_PHYS_BASE + 0x17000)
+#define UART3_BASE	(APB_PHYS_BASE + 0x18000)
+
+static inline void putc(char c)
+{
+	volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
+	/* UART enabled? */
+	if (!(UART[UART_IER] & UART_IER_UUE))
+		return;
+
+	while (!(UART[UART_LSR] & UART_LSR_THRE))
+		barrier();
+
+	UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
new file mode 100644
index 00000000000..b60ccaf9fee
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
new file mode 100644
index 00000000000..52ff2f065eb
--- /dev/null
+++ b/arch/arm/mach-mmp/irq.c
@@ -0,0 +1,55 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ *  Author:	Bin Yang <bin.yang@marvell.com>
+ *  Created:	Sep 30, 2008
+ *  Copyright:	Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+#define IRQ_ROUTE_TO_AP		(ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
+
+#define PRIORITY_DEFAULT	0x1
+#define PRIORITY_NONE		0x0	/* means IRQ disabled */
+
+static void icu_mask_irq(unsigned int irq)
+{
+	__raw_writel(PRIORITY_NONE, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+	__raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name	= "icu_irq",
+	.ack	= icu_mask_irq,
+	.mask	= icu_mask_irq,
+	.unmask	= icu_unmask_irq,
+};
+
+void __init icu_init_irq(void)
+{
+	int irq;
+
+	for (irq = 0; irq < 64; irq++) {
+		icu_mask_irq(irq);
+		set_irq_chip(irq, &icu_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
new file mode 100644
index 00000000000..ae924468658
--- /dev/null
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mach-mmp/pxa168.c
+ *
+ *  Code specific to PXA168
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/cputype.h>
+#include <mach/regs-apbc.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/devices.h>
+#include <mach/mfp.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
+{
+	MFP_ADDR_X(GPIO0,   GPIO36,  0x04c),
+	MFP_ADDR_X(GPIO37,  GPIO55,  0x000),
+	MFP_ADDR_X(GPIO56,  GPIO123, 0x0e0),
+	MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
+
+	MFP_ADDR_END,
+};
+
+#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa168_init_gpio(void)
+{
+	int i;
+
+	/* enable GPIO clock */
+	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
+
+	/* unmask GPIO edge detection for all 4 banks - APMASKx */
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xffffffff, APMASK(i));
+
+	pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
+}
+
+void __init pxa168_init_irq(void)
+{
+	icu_init_irq();
+	pxa168_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
+static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa168_init(void)
+{
+	if (cpu_is_pxa168()) {
+		mfp_init_base(MFPR_VIRT_BASE);
+		mfp_init_addr(pxa168_mfp_addr_map);
+		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
+		clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
+	}
+
+	return 0;
+}
+postcore_initcall(pxa168_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa168_timer_init(void)
+{
+	/* this is early, we have to initialize the CCU registers by
+	 * ourselves instead of using clk_* API. Clock rate is defined
+	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
+	 */
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+
+	/* 3.25MHz, bus/functional clock enabled, release reset */
+	__raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+
+	timer_init(IRQ_PXA168_TIMER1);
+}
+
+struct sys_timer pxa168_timer = {
+	.init	= pxa168_timer_init,
+};
+
+/* on-chip devices */
+PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
+PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
new file mode 100644
index 00000000000..453f8f7758b
--- /dev/null
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -0,0 +1,158 @@
+/*
+ *  linux/arch/arm/mach-mmp/pxa910.c
+ *
+ *  Code specific to PXA910
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mfp.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
+{
+	MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
+	MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
+	MFP_ADDR_X(GPIO100, GPIO109, 0x238),
+
+	MFP_ADDR(GPIO123, 0xcc),
+	MFP_ADDR(GPIO124, 0xd0),
+
+	MFP_ADDR(DF_IO0, 0x40),
+	MFP_ADDR(DF_IO1, 0x3c),
+	MFP_ADDR(DF_IO2, 0x38),
+	MFP_ADDR(DF_IO3, 0x34),
+	MFP_ADDR(DF_IO4, 0x30),
+	MFP_ADDR(DF_IO5, 0x2c),
+	MFP_ADDR(DF_IO6, 0x28),
+	MFP_ADDR(DF_IO7, 0x24),
+	MFP_ADDR(DF_IO8, 0x20),
+	MFP_ADDR(DF_IO9, 0x1c),
+	MFP_ADDR(DF_IO10, 0x18),
+	MFP_ADDR(DF_IO11, 0x14),
+	MFP_ADDR(DF_IO12, 0x10),
+	MFP_ADDR(DF_IO13, 0xc),
+	MFP_ADDR(DF_IO14, 0x8),
+	MFP_ADDR(DF_IO15, 0x4),
+
+	MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
+	MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
+	MFP_ADDR(SM_nCS0, 0x4c),
+	MFP_ADDR(SM_nCS1, 0x50),
+	MFP_ADDR(DF_WEn, 0x54),
+	MFP_ADDR(DF_REn, 0x58),
+	MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
+	MFP_ADDR(DF_ALE_SM_WEn, 0x60),
+	MFP_ADDR(SM_SCLK, 0x64),
+	MFP_ADDR(DF_RDY0, 0x68),
+	MFP_ADDR(SM_BE0, 0x6c),
+	MFP_ADDR(SM_BE1, 0x70),
+	MFP_ADDR(SM_ADV, 0x74),
+	MFP_ADDR(DF_RDY1, 0x78),
+	MFP_ADDR(SM_ADVMUX, 0x7c),
+	MFP_ADDR(SM_RDY, 0x80),
+
+	MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
+
+	MFP_ADDR_END,
+};
+
+#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa910_init_gpio(void)
+{
+	int i;
+
+	/* enable GPIO clock */
+	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
+
+	/* unmask GPIO edge detection for all 4 banks - APMASKx */
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xffffffff, APMASK(i));
+
+	pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
+}
+
+void __init pxa910_init_irq(void)
+{
+	icu_init_irq();
+	pxa910_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
+static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa910_init(void)
+{
+	if (cpu_is_pxa910()) {
+		mfp_init_base(MFPR_VIRT_BASE);
+		mfp_init_addr(pxa910_mfp_addr_map);
+		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
+		clks_register(ARRAY_AND_SIZE(pxa910_clkregs));
+	}
+
+	return 0;
+}
+postcore_initcall(pxa910_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa910_timer_init(void)
+{
+	/* reset and configure */
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
+	__raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+
+	timer_init(IRQ_PXA910_AP1_TIMER1);
+}
+
+struct sys_timer pxa910_timer = {
+	.init	= pxa910_timer_init,
+};
+
+/* on-chip devices */
+
+/* NOTE: there are totally 3 UARTs on PXA910:
+ *
+ *   UART1   - Slow UART (can be used both by AP and CP)
+ *   UART2/3 - Fast UART
+ *
+ * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
+ * they are re-ordered as:
+ *
+ *   pxa910_device_uart1 - UART2 as FFUART
+ *   pxa910_device_uart2 - UART3 as BTUART
+ *
+ * UART1 is not used by AP for the moment.
+ */
+PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
+PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
new file mode 100644
index 00000000000..0e0c9220eab
--- /dev/null
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -0,0 +1,109 @@
+/*
+ *  linux/arch/arm/mach-mmp/tavorevb.c
+ *
+ *  Support for the Marvell PXA910-based TavorEVB Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa910.h>
+#include <mach/pxa910.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long tavorevb_pin_config[] __initdata = {
+	/* UART2 */
+	GPIO47_UART2_RXD,
+	GPIO48_UART2_TXD,
+
+	/* SMC */
+	SM_nCS0_nCS0,
+	SM_ADV_SM_ADV,
+	SM_SCLK_SM_SCLK,
+	SM_SCLK_SM_SCLK,
+	SM_BE0_SM_BE0,
+	SM_BE1_SM_BE1,
+
+	/* DFI */
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
+	DF_nCS0_SM_nCS2_nCS0,
+	DF_ALE_SM_WEn_ND_ALE,
+	DF_CLE_SM_OEn_ND_CLE,
+	DF_WEn_DF_WEn,
+	DF_REn_DF_REn,
+	DF_RDY0_DF_RDY0,
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= SMC_CS1_PHYS_BASE + 0x300,
+		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(80),
+		.end	= gpio_to_irq(80),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &tavorevb_smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static void __init tavorevb_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
+
+	/* on-chip devices */
+	pxa910_add_uart(1);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa910_init_irq,
+	.timer          = &pxa910_timer,
+	.init_machine   = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
new file mode 100644
index 00000000000..b03a6eda741
--- /dev/null
+++ b/arch/arm/mach-mmp/time.c
@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-mmp/time.c
+ *
+ *   Support for clocksource and clockevents
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ *   2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
+ *   2008-10-08: Bin Yang <bin.yang@marvell.com>
+ *
+ * The timers module actually includes three timers, each timer with upto
+ * three match comparators. Timer #0 is used here in free-running mode as
+ * the clock source, and match comparator #1 used as clock event device.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-timers.h>
+#include <mach/irqs.h>
+
+#include "clock.h"
+
+#define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
+
+#define MAX_DELTA		(0xfffffffe)
+#define MIN_DELTA		(16)
+
+#define TCR2NS_SCALE_FACTOR	10
+
+static unsigned long tcr2ns_scale;
+
+static void __init set_tcr2ns_scale(unsigned long tcr_rate)
+{
+	unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR;
+	do_div(v, tcr_rate);
+	tcr2ns_scale = v;
+	/*
+	 * We want an even value to automatically clear the top bit
+	 * returned by cnt32_to_63() without an additional run time
+	 * instruction. So if the LSB is 1 then round it up.
+	 */
+	if (tcr2ns_scale & 1)
+		tcr2ns_scale++;
+}
+
+/*
+ * FIXME: the timer needs some delay to stablize the counter capture
+ */
+static inline uint32_t timer_read(void)
+{
+	int delay = 100;
+
+	__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+
+	while (delay--)
+		cpu_relax();
+
+	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(timer_read());
+	return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR;
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* disable and clear pending interrupt status */
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+	c->event_handler(c);
+	return IRQ_HANDLED;
+}
+
+static int timer_set_next_event(unsigned long delta,
+				struct clock_event_device *dev)
+{
+	unsigned long flags, next;
+
+	local_irq_save(flags);
+
+	/* clear pending interrupt status and enable */
+	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+
+	next = timer_read() + delta;
+	__raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/* disable the matching interrupt */
+		__raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
+		break;
+	}
+	local_irq_restore(flags);
+}
+
+static struct clock_event_device ckevt = {
+	.name		= "clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.rating		= 200,
+	.set_next_event	= timer_set_next_event,
+	.set_mode	= timer_set_mode,
+};
+
+static cycle_t clksrc_read(void)
+{
+	return timer_read();
+}
+
+static struct clocksource cksrc = {
+	.name		= "clocksource",
+	.shift		= 20,
+	.rating		= 200,
+	.read		= clksrc_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init timer_config(void)
+{
+	uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+	uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
+	uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
+
+	__raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+
+	ccr &= TMR_CCR_CS_0(0x3);
+	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+
+	/* free-running mode */
+	__raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+
+	/* enable timer counter */
+	__raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+}
+
+static struct irqaction timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= timer_interrupt,
+	.dev_id		= &ckevt,
+};
+
+void __init timer_init(int irq)
+{
+	timer_config();
+
+	set_tcr2ns_scale(CLOCK_TICK_RATE);
+
+	ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
+	ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
+	ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
+	ckevt.cpumask = cpumask_of(0);
+
+	cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift);
+
+	setup_irq(irq, &timer_irq);
+
+	clocksource_register(&cksrc);
+	clockevents_register_device(&ckevt);
+}
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
new file mode 100644
index 00000000000..08cfef6c92a
--- /dev/null
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -0,0 +1,47 @@
+/*
+ *  linux/arch/arm/mach-mmp/ttc_dkb.c
+ *
+ *  Support for the Marvell PXA910-based TTC_DKB Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa910.h>
+#include <mach/pxa910.h>
+
+#include "common.h"
+
+#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
+
+static unsigned long ttc_dkb_pin_config[] __initdata = {
+	/* UART2 */
+	GPIO47_UART2_RXD,
+	GPIO48_UART2_TXD,
+};
+
+static void __init ttc_dkb_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
+
+	/* on-chip devices */
+	pxa910_add_uart(1);
+}
+
+MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa910_init_irq,
+	.timer          = &pxa910_timer,
+	.init_machine   = ttc_dkb_init,
+MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index f05ad2e0f23..574ccc493da 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -17,7 +17,7 @@
 
 void arch_idle(void);
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	for (;;) ;  /* depends on IPC w/ other core */
 }
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index d83cb86837d..6fbe68fe441 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -8,6 +8,12 @@ config MACH_DB78X00_BP
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DB-78x00-BP Development Board.
 
+config MACH_RD78X00_MASA
+	bool "Marvell RD-78x00-mASA Reference Design"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell RD-78x00-mASA Reference Design.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index ec16c05c3b1..da628b7f3bb 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,2 +1,3 @@
 obj-y				+= common.o addr-map.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
+obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index b0e4e0d8f50..a575daaa62d 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -14,7 +14,9 @@
 #include <linux/serial_8250.h>
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/ethtool.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/mv78xx0.h>
@@ -430,9 +432,22 @@ static struct platform_device mv78xx0_ge10 = {
 
 void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	u32 dev, rev;
+
 	eth_data->shared = &mv78xx0_ge10_shared;
 	mv78xx0_ge10.dev.platform_data = eth_data;
 
+	/*
+	 * On the Z0, ge10 and ge11 are internally connected back
+	 * to back, and not brought out.
+	 */
+	mv78xx0_pcie_id(&dev, &rev);
+	if (dev == MV78X00_Z0_DEV_ID) {
+		eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+		eth_data->speed = SPEED_1000;
+		eth_data->duplex = DUPLEX_FULL;
+	}
+
 	platform_device_register(&mv78xx0_ge10_shared);
 	platform_device_register(&mv78xx0_ge10);
 }
@@ -484,13 +499,101 @@ static struct platform_device mv78xx0_ge11 = {
 
 void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	u32 dev, rev;
+
 	eth_data->shared = &mv78xx0_ge11_shared;
 	mv78xx0_ge11.dev.platform_data = eth_data;
 
+	/*
+	 * On the Z0, ge10 and ge11 are internally connected back
+	 * to back, and not brought out.
+	 */
+	mv78xx0_pcie_id(&dev, &rev);
+	if (dev == MV78X00_Z0_DEV_ID) {
+		eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+		eth_data->speed = SPEED_1000;
+		eth_data->duplex = DUPLEX_FULL;
+	}
+
 	platform_device_register(&mv78xx0_ge11_shared);
 	platform_device_register(&mv78xx0_ge11);
 }
 
+/*****************************************************************************
+ * I2C bus 0
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
+	.freq_m		= 8, /* assumes 166 MHz TCLK */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource mv78xx0_i2c_0_resources[] = {
+	{
+		.name   = "i2c 0 base",
+		.start  = I2C_0_PHYS_BASE,
+		.end    = I2C_0_PHYS_BASE + 0x1f,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "i2c 0 irq",
+		.start  = IRQ_MV78XX0_I2C_0,
+		.end    = IRQ_MV78XX0_I2C_0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+
+static struct platform_device mv78xx0_i2c_0 = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv78xx0_i2c_0_resources),
+	.resource	= mv78xx0_i2c_0_resources,
+	.dev		= {
+		.platform_data	= &mv78xx0_i2c_0_pdata,
+	},
+};
+
+/*****************************************************************************
+ * I2C bus 1
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
+	.freq_m		= 8, /* assumes 166 MHz TCLK */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource mv78xx0_i2c_1_resources[] = {
+	{
+		.name   = "i2c 1 base",
+		.start  = I2C_1_PHYS_BASE,
+		.end    = I2C_1_PHYS_BASE + 0x1f,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "i2c 1 irq",
+		.start  = IRQ_MV78XX0_I2C_1,
+		.end    = IRQ_MV78XX0_I2C_1,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+
+static struct platform_device mv78xx0_i2c_1 = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(mv78xx0_i2c_1_resources),
+	.resource	= mv78xx0_i2c_1_resources,
+	.dev		= {
+		.platform_data	= &mv78xx0_i2c_1_pdata,
+	},
+};
+
+void __init mv78xx0_i2c_init(void)
+{
+	platform_device_register(&mv78xx0_i2c_0);
+	platform_device_register(&mv78xx0_i2c_1);
+}
 
 /*****************************************************************************
  * SATA
@@ -719,6 +822,32 @@ struct sys_timer mv78xx0_timer = {
 /*****************************************************************************
  * General
  ****************************************************************************/
+static char * __init mv78xx0_id(void)
+{
+	u32 dev, rev;
+
+	mv78xx0_pcie_id(&dev, &rev);
+
+	if (dev == MV78X00_Z0_DEV_ID) {
+		if (rev == MV78X00_REV_Z0)
+			return "MV78X00-Z0";
+		else
+			return "MV78X00-Rev-Unsupported";
+	} else if (dev == MV78100_DEV_ID) {
+		if (rev == MV78100_REV_A0)
+			return "MV78100-A0";
+		else
+			return "MV78100-Rev-Unsupported";
+	} else if (dev == MV78200_DEV_ID) {
+		if (rev == MV78100_REV_A0)
+			return "MV78200-A0";
+		else
+			return "MV78200-Rev-Unsupported";
+	} else {
+		return "Device-Unknown";
+	}
+}
+
 static int __init is_l2_writethrough(void)
 {
 	return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
@@ -737,7 +866,8 @@ void __init mv78xx0_init(void)
 	get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
 	tclk = get_tclk();
 
-	printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
+	printk(KERN_INFO "%s ", mv78xx0_id());
+	printk("core #%d, ", core_index);
 	printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
 	printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
 	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 78af5de319d..befc2247546 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -29,6 +29,8 @@ void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
 void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
 				int maj, int min);
 
+void mv78xx0_pcie_id(u32 *dev, u32 *rev);
+
 void mv78xx0_ehci0_init(void);
 void mv78xx0_ehci1_init(void);
 void mv78xx0_ehci2_init(void);
@@ -42,6 +44,7 @@ void mv78xx0_uart0_init(void);
 void mv78xx0_uart1_init(void);
 void mv78xx0_uart2_init(void);
 void mv78xx0_uart3_init(void);
+void mv78xx0_i2c_init(void);
 
 extern struct sys_timer mv78xx0_timer;
 
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 2e285bbb7bb..efdabe04c69 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -14,6 +14,7 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/i2c.h>
 #include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,21 +29,22 @@ static struct mv643xx_eth_platform_data db78x00_ge01_data = {
 };
 
 static struct mv643xx_eth_platform_data db78x00_ge10_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(10),
 };
 
 static struct mv643xx_eth_platform_data db78x00_ge11_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
 };
 
 static struct mv_sata_platform_data db78x00_sata_data = {
 	.n_ports	= 2,
 };
 
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
 static void __init db78x00_init(void)
 {
 	/*
@@ -64,6 +66,8 @@ static void __init db78x00_init(void)
 		mv78xx0_sata_init(&db78x00_sata_data);
 		mv78xx0_uart0_init();
 		mv78xx0_uart2_init();
+		mv78xx0_i2c_init();
+		i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
 	} else {
 		mv78xx0_uart1_init();
 		mv78xx0_uart3_init();
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index e930ea5330a..582cffc733a 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -80,6 +80,18 @@
 #define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
 
 /*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID	0x6381
+#define MV78X00_REV_Z0		1
+
+#define MV78100_DEV_ID		0x7810
+#define MV78100_REV_A0		1
+
+#define MV78200_DEV_ID		0x7820
+#define MV78200_REV_A0		1
+
+/*
  * Register Map
  */
 #define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
@@ -90,6 +102,8 @@
 #define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
 #define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
 #define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
+#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1000)
+#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1100)
 #define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
 #define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
 #define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 7d517940883..1d6350b22d0 100644
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -17,7 +17,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index aad3a7a2f83..a560439dcc3 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -33,6 +33,12 @@ static struct resource pcie_io_space;
 static struct resource pcie_mem_space;
 
 
+void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
+{
+	*dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
+	*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+}
+
 static void __init mv78xx0_pcie_preinit(void)
 {
 	int i;
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
new file mode 100644
index 00000000000..e136b7a0335
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
+ *
+ * Marvell RD-78x00-mASA Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
+};
+
+static struct mv_sata_platform_data rd78x00_masa_sata_data = {
+	.n_ports	= 2,
+};
+
+static void __init rd78x00_masa_init(void)
+{
+	/*
+	 * Basic MV78x00 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	if (mv78xx0_core_index() == 0) {
+		mv78xx0_ehci0_init();
+		mv78xx0_ehci1_init();
+		mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
+		mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
+		mv78xx0_sata_init(&rd78x00_masa_sata_data);
+		mv78xx0_uart0_init();
+		mv78xx0_uart2_init();
+	} else {
+		mv78xx0_ehci2_init();
+		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
+		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
+		mv78xx0_uart1_init();
+		mv78xx0_uart3_init();
+	}
+}
+
+static int __init rd78x00_pci_init(void)
+{
+	/*
+	 * Assign all PCIe devices to CPU core #0.
+	 */
+	if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
+		mv78xx0_pcie_init(1, 1);
+
+	return 0;
+}
+subsys_initcall(rd78x00_pci_init);
+
+MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= MV78XX0_REGS_PHYS_BASE,
+	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= rd78x00_masa_init,
+	.map_io		= mv78xx0_map_io,
+	.init_irq	= mv78xx0_init_irq,
+	.timer		= &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
index 2b59fc74784..eb7660f5d4b 100644
--- a/arch/arm/mach-mx1/Kconfig
+++ b/arch/arm/mach-mx1/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MX1
 
-comment "MX1 Platforms"
+comment "MX1 platforms:"
 
 config MACH_MXLADS
 	bool
@@ -11,4 +11,9 @@ config ARCH_MX1ADS
 	help
 	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
+
 endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index b969719011f..82f1309568e 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -8,3 +8,4 @@ obj-y			+= generic.o clock.o devices.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 4bcd1ece55f..0d0f306851d 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -25,6 +25,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include "crm_regs.h"
 
 static int _clk_enable(struct clk *clk)
@@ -87,33 +88,6 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
 	return clk->parent->set_rate(clk->parent, rate);
 }
 
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref *
-		((mfi << 16) + (mfn << 16) / (mfd + 1));
-	quot = (pd + 1) * (1 << 16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned long)ll;
-}
-
 static unsigned long clk16m_get_rate(struct clk *clk)
 {
 	return 16000000;
@@ -188,7 +162,7 @@ static struct clk prem_clk = {
 
 static unsigned long system_clk_get_rate(struct clk *clk)
 {
-	return mx1_decode_pll(__raw_readl(CCM_SPCTL0),
+	return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
 			      clk_get_rate(clk->parent));
 }
 
@@ -200,7 +174,7 @@ static struct clk system_clk = {
 
 static unsigned long mcu_clk_get_rate(struct clk *clk)
 {
-	return mx1_decode_pll(__raw_readl(CCM_MPCTL0),
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
 			      clk_get_rate(clk->parent));
 }
 
@@ -488,7 +462,7 @@ static struct clk clko_clk = {
 };
 
 static struct clk dma_clk = {
-	.name = "dma_clk",
+	.name = "dma",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -539,7 +513,7 @@ static struct clk gpt_clk = {
 };
 
 static struct clk uart_clk = {
-	.name = "uart_clk",
+	.name = "uart",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -621,7 +595,7 @@ static struct clk *mxc_clks[] = {
 	&rtc_clk,
 };
 
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx1_clocks_init(unsigned long fref)
 {
 	struct clk **clkp;
 	unsigned int reg;
@@ -652,5 +626,7 @@ int __init mxc_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
+	mxc_timer_init(&gpt_clk);
+
 	return 0;
 }
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 686d8d2dbb2..97f42d96d7a 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -23,8 +23,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 
+#include "devices.h"
+
 static struct resource imx_csi_resources[] = {
 	[0] = {
 		.start  = 0x00224000,
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 2e4b185fe4a..7ae229bc1b7 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -16,15 +16,22 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/irqs.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux.h>
 #include "devices.h"
 
 /*
@@ -104,6 +111,55 @@ static struct platform_device flash_device = {
 };
 
 /*
+ * I2C
+ */
+
+#ifdef CONFIG_I2C_IMX
+static int i2c_pins[] = {
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+};
+
+static int i2c_init(struct device *dev)
+{
+	return mxc_gpio_setup_multiple_pins(i2c_pins,
+			ARRAY_SIZE(i2c_pins), "I2C");
+}
+
+static void i2c_exit(struct device *dev)
+{
+	mxc_gpio_release_multiple_pins(i2c_pins,
+			ARRAY_SIZE(i2c_pins));
+}
+
+static struct pcf857x_platform_data pcf857x_data[] = {
+	{
+		.gpio_base = 4 * 32,
+	}, {
+		.gpio_base = 4 * 32 + 16,
+	}
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+	.bitrate = 100000,
+	.init = i2c_init,
+	.exit = i2c_exit,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf857x", 0x22),
+		.type = "pcf8575",
+		.platform_data = &pcf857x_data[0],
+	}, {
+		I2C_BOARD_INFO("pcf857x", 0x24),
+		.type = "pcf8575",
+		.platform_data = &pcf857x_data[1],
+	},
+};
+#endif
+
+/*
  * Board init
  */
 static void __init mx1ads_init(void)
@@ -114,12 +170,19 @@ static void __init mx1ads_init(void)
 
 	/* Physmap flash */
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+	/* I2C */
+#ifdef CONFIG_I2C_IMX
+	i2c_register_board_info(0, mx1ads_i2c_devices,
+				ARRAY_SIZE(mx1ads_i2c_devices));
+
+	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+#endif
 }
 
 static void __init mx1ads_timer_init(void)
 {
-	mxc_clocks_init(32000);
-	mxc_timer_init("gpt_clk");
+	mx1_clocks_init(32000);
 }
 
 struct sys_timer mx1ads_timer = {
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
new file mode 100644
index 00000000000..0e71f3fa28b
--- /dev/null
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -0,0 +1,160 @@
+/*
+ * linux/arch/arm/mach-mx1/scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+	.start	= IMX_CS0_PHYS,
+	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+	.width  = 2,
+};
+
+static struct platform_device scb_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &scb_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags	= DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+	[0] = {
+		.name	= "address area",
+		.start	= IMX_CS5_PHYS,
+		.end	= IMX_CS5_PHYS + 1,
+		.flags	= IORESOURCE_MEM	/* address access */
+	},
+	[1] = {
+		.name	= "data area",
+		.start	= IMX_CS5_PHYS + 4,
+		.end	= IMX_CS5_PHYS + 5,
+		.flags	= IORESOURCE_MEM	/* data access */
+	},
+	[2] = {
+		.start	= IRQ_GPIOC(3),
+		.end	= IRQ_GPIOC(3),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+	},
+};
+
+static struct platform_device dm9000x_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000x_resources),
+	.resource	= dm9000x_resources,
+	.dev		= {
+		.platform_data = &dm9000_platdata,
+	}
+};
+
+static int mxc_uart1_pins[] = {
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+	.init = uart1_mxc_init,
+	.exit = uart1_mxc_exit,
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&scb_flash_device,
+	&dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+	mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+	printk(KERN_INFO"Scb9328: Adding devices\n");
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+	mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+	.init	= scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+    /* Sascha Hauer */
+	.phys_io	= 0x00200000,
+	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
+	.boot_params	= 0x08000100,
+	.map_io		= mxc_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &scb9328_timer,
+	.init_machine	= scb9328_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 1eaa97cb716..42a788842f4 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -1,14 +1,22 @@
-comment "MX2 family CPU support"
-	depends on ARCH_MX2
+if ARCH_MX2
+
+choice
+	prompt "CPUs:"
+	default MACH_MX21
+
+config MACH_MX21
+	bool "i.MX21 support"
+	help
+	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
-	depends on ARCH_MX2
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
-comment "MX2 Platforms"
-	depends on ARCH_MX2
+endchoice
+
+comment "MX2 platforms:"
 
 config MACH_MX27ADS
 	bool "MX27ADS platform"
@@ -37,3 +45,5 @@ config MACH_PCM970_BASEBOARD
 	  PCM970 evaluation board.
 
 endchoice
+
+endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 382d86080e8..6e1a2bffc81 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -6,6 +6,8 @@
 
 obj-y	:=  system.o generic.o devices.o serial.o
 
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
 obj-$(CONFIG_MACH_MX27) += clock_imx27.o
 
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot
index 696831dcd48..e867398a8fd 100644
--- a/arch/arm/mach-mx2/Makefile.boot
+++ b/arch/arm/mach-mx2/Makefile.boot
@@ -1,3 +1,7 @@
-   zreladdr-y	:= 0xA0008000
-params_phys-y	:= 0xA0000100
-initrd_phys-y	:= 0xA0800000
+zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
+params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+
+zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
+params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
new file mode 100644
index 00000000000..2dee5c87614
--- /dev/null
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -0,0 +1,984 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+static int _clk_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg |= CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+
+	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+		;
+	return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+}
+
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 64)
+		div = 64;
+
+	return parent_rate / div;
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return -EINVAL;
+
+	div = parent_rate / rate;
+	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg =
+	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+				       (clk->id << 3));
+	reg |= div << (clk->id << 3);
+	__raw_writel(reg, CCM_PCDR1);
+
+	return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+	unsigned long usb_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+	return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
+
+	return 2UL * parent_rate / pdf;
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+	return _clk_ssix_recalc(clk,
+		(PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
+		>> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+	return _clk_ssix_recalc(clk,
+		(PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+		CCM_PCDR0_SSI2BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
+		>> CCM_PCDR0_NFCDIV_OFFSET;
+
+	return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+static unsigned long external_high_reference; /* in Hz */
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz.
+ */
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static unsigned long external_low_reference; /* in Hz */
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+
+static unsigned long _clk_fpm_recalc(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 512;
+}
+
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+	.parent = &ckil_clk,
+	.get_rate = _clk_fpm_recalc,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_MPCTL0);
+	pdf = (reg & CCM_MPCTL0_PD_MASK)  >> CCM_MPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_fclk_get_rate(struct clk *clk)
+{
+	unsigned long parent_rate;
+	u32 div;
+
+	div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+	parent_rate = clk_get_rate(clk->parent);
+
+	return parent_rate / (div+1);
+}
+
+static struct clk fclk_clk = {
+	.parent = &mpll_clk,
+	.get_rate = _clk_fclk_get_rate
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_SPCTL0);
+	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_spll_clk,
+	.enable = _clk_spll_enable,
+	.disable = _clk_spll_disable,
+};
+
+static unsigned long get_hclk_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long bclk_pdf;
+
+	bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+		>> CCM_CSCR_BCLK_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (bclk_pdf + 1);
+}
+
+static struct clk hclk_clk = {
+	.parent = &fclk_clk,
+	.get_rate = get_hclk_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long ipg_pdf;
+
+	ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+	.parent = &hclk_clk,
+	.get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+	unsigned long perclk_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return 0;
+
+	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+	return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+	{
+		.id = 0,
+		.parent = &mpll_clk,
+		.get_rate = _clk_perclkx_recalc,
+	}, {
+		.id = 1,
+		.parent = &mpll_clk,
+		.get_rate = _clk_perclkx_recalc,
+	}, {
+		.id = 2,
+		.parent = &mpll_clk,
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		/* Enable/Disable done via lcd_clkc[1] */
+	}, {
+		.id = 3,
+		.parent = &mpll_clk,
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		/* Enable/Disable done via csi_clk[1] */
+	},
+};
+
+static struct clk uart_ipg_clk[];
+
+static struct clk uart_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[2],
+	}, {
+		.id = 3,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[3],
+	},
+};
+
+static struct clk uart_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART1_REG,
+		.enable_shift = CCM_PCCR_UART1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART2_REG,
+		.enable_shift = CCM_PCCR_UART2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART3_REG,
+		.enable_shift = CCM_PCCR_UART3_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART4_REG,
+		.enable_shift = CCM_PCCR_UART4_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt_ipg_clk[];
+
+static struct clk gpt_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[2],
+	},
+};
+
+static struct clk gpt_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT1_REG,
+		.enable_shift = CCM_PCCR_GPT1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT2_REG,
+		.enable_shift = CCM_PCCR_GPT2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT3_REG,
+		.enable_shift = CCM_PCCR_GPT3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk pwm_clk[] = {
+	{
+		.parent = &per_clk[0],
+		.secondary = &pwm_clk[1],
+	}, {
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_PWM_REG,
+		.enable_shift = CCM_PCCR_PWM_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk sdhc_ipg_clk[];
+
+static struct clk sdhc_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &sdhc_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &sdhc_ipg_clk[1],
+	},
+};
+
+static struct clk sdhc_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SDHC1_REG,
+		.enable_shift = CCM_PCCR_SDHC1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SDHC2_REG,
+		.enable_shift = CCM_PCCR_SDHC2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk cspi_ipg_clk[];
+
+static struct clk cspi_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[2],
+	},
+};
+
+static struct clk cspi_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI1_REG,
+		.enable_shift = CCM_PCCR_CSPI1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI2_REG,
+		.enable_shift = CCM_PCCR_CSPI2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI3_REG,
+		.enable_shift = CCM_PCCR_CSPI3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk lcdc_clk[] = {
+	{
+		.parent = &per_clk[2],
+		.secondary = &lcdc_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.parent = &ipg_clk,
+		.secondary = &lcdc_clk[2],
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_LCDC_REG,
+		.enable_shift = CCM_PCCR_LCDC_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_LCDC_REG,
+		.enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk csi_clk[] = {
+	{
+		.parent = &per_clk[3],
+		.secondary = &csi_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_CSI_REG,
+		.enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk usb_clk[] = {
+	{
+		.parent = &spll_clk,
+		.get_rate = _clk_usb_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_USBOTG_REG,
+		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
+		.enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk ssi_ipg_clk[];
+
+static struct clk ssi_clk[] = {
+	{
+		.id = 0,
+		.parent = &mpll_clk,
+		.secondary = &ssi_ipg_clk[0],
+		.get_rate = _clk_ssi1_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI1_BAUD_REG,
+		.enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &mpll_clk,
+		.secondary = &ssi_ipg_clk[1],
+		.get_rate = _clk_ssi2_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI2_BAUD_REG,
+		.enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk ssi_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI1_REG,
+		.enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI2_REG,
+		.enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+
+static struct clk nfc_clk = {
+	.parent = &fclk_clk,
+	.get_rate = _clk_nfc_recalc,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_NFC_REG,
+	.enable_shift = CCM_PCCR_NFC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk dma_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_DMA_REG,
+		.enable_shift = CCM_PCCR_DMA_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &dma_clk[1],
+	},  {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_DMA_REG,
+		.enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk brom_clk = {
+	.parent = &hclk_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_HCLK_BROM_REG,
+	.enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk emma_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_EMMA_REG,
+		.enable_shift = CCM_PCCR_EMMA_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &emma_clk[1],
+	}, {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_EMMA_REG,
+		.enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk slcdc_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SLCDC_REG,
+		.enable_shift = CCM_PCCR_SLCDC_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &slcdc_clk[1],
+	}, {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
+		.enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk wdog_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_WDT_REG,
+	.enable_shift = CCM_PCCR_WDT_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_GPIO_REG,
+	.enable_shift = CCM_PCCR_GPIO_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk i2c_clk = {
+	.id = 0,
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_I2C1_REG,
+	.enable_shift = CCM_PCCR_I2C1_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_KPP_REG,
+	.enable_shift = CCM_PCCR_KPP_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_OWIRE_REG,
+	.enable_shift = CCM_PCCR_OWIRE_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_RTC_REG,
+	.enable_shift = CCM_PCCR_RTC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 8)
+		div = 8;
+
+	return parent_rate / div;
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = __raw_readl(CCM_PCDR0);
+
+	if (clk->parent == &usb_clk[0]) {
+		reg &= ~CCM_PCDR0_48MDIV_MASK;
+		reg |= div << CCM_PCDR0_48MDIV_OFFSET;
+	}
+	__raw_writel(reg, CCM_PCDR0);
+
+	return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+	u32 div = 0;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->parent == &usb_clk[0]) /* 48M */
+		div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
+			 >> CCM_PCDR0_48MDIV_OFFSET;
+	div++;
+
+	return parent_rate / div;
+}
+
+static struct clk clko_clk;
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+	if (parent == &ckil_clk)
+		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &fpm_clk)
+		reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ckih_clk)
+		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == mpll_clk.parent)
+		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == spll_clk.parent)
+		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &mpll_clk)
+		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &spll_clk)
+		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &fclk_clk)
+		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &hclk_clk)
+		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ipg_clk)
+		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[0])
+		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[1])
+		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[2])
+		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[3])
+		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi_clk[0])
+		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi_clk[1])
+		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &nfc_clk)
+		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &usb_clk[0])
+		reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &clko_clk)
+		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, CCM_CCSR);
+
+	return 0;
+}
+
+static struct clk clko_clk = {
+	.get_rate = _clk_clko_recalc,
+	.set_rate = _clk_clko_set_rate,
+	.round_rate = _clk_clko_round_rate,
+	.set_parent = _clk_clko_set_parent,
+};
+
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+/* It's unlikely that any driver wants one of them directly:
+	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
+	_REGISTER_CLOCK(NULL, "fpm", fpm_clk)
+	_REGISTER_CLOCK(NULL, "mpll", mpll_clk)
+	_REGISTER_CLOCK(NULL, "spll", spll_clk)
+	_REGISTER_CLOCK(NULL, "fclk", fclk_clk)
+	_REGISTER_CLOCK(NULL, "hclk", hclk_clk)
+	_REGISTER_CLOCK(NULL, "ipg", ipg_clk)
+*/
+	_REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
+	_REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
+	_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
+	_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
+	_REGISTER_CLOCK(NULL, "clko", clko_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
+	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
+	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
+	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
+	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
+	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
+	_REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
+	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
+	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
+	_REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
+	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
+	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
+	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+	_REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK(NULL, "owire", owire_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+};
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+	int i;
+	u32 cscr;
+
+	external_low_reference = lref;
+	external_high_reference = href;
+
+	/* detect clock reference for both system PLL */
+	cscr = CSCR();
+	if (cscr & CCM_CSCR_MCU)
+		mpll_clk.parent = &ckih_clk;
+	else
+		mpll_clk.parent = &fpm_clk;
+
+	if (cscr & CCM_CSCR_SP)
+		spll_clk.parent = &ckih_clk;
+	else
+		spll_clk.parent = &fpm_clk;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/* Turn off all clock gates */
+	__raw_writel(0, CCM_PCCR0);
+	__raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
+
+	/* This turns of the serial PLL as well */
+	spll_clk.disable(&spll_clk);
+
+	/* This will propagate to all children and init all the clock rates. */
+	clk_enable(&per_clk[0]);
+	clk_enable(&gpio_clk);
+
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+	clk_enable(&uart_clk[0]);
+#endif
+
+	mxc_timer_init(&gpt_clk[0]);
+	return 0;
+}
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index c69896d011a..3f7280c490f 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -1,6 +1,7 @@
 /*
  * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -20,23 +21,60 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/spinlock.h>
 
-#include <mach/clock.h>
-#include <mach/common.h>
+#include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#include "crm_regs.h"
-
-static struct clk ckil_clk;
-static struct clk mpll_clk;
-static struct clk mpll_main_clk[];
-static struct clk spll_clk;
-
-static int _clk_enable(struct clk *clk)
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+/* Register offsets */
+#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
+#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
+#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
+#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
+#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
+#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
+#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
+#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
+#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
+#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
+#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
+#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
+#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
+#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+
+#define CCM_CSCR_UPDATE_DIS	(1 << 31)
+#define CCM_CSCR_SSI2		(1 << 23)
+#define CCM_CSCR_SSI1		(1 << 22)
+#define CCM_CSCR_VPU		(1 << 21)
+#define CCM_CSCR_MSHC           (1 << 20)
+#define CCM_CSCR_SPLLRES        (1 << 19)
+#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC        (1 << 15)
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+static struct clk mpll_main1_clk, mpll_main2_clk;
+
+static int clk_pccr_enable(struct clk *clk)
 {
 	unsigned long reg;
 
+	if (!clk->enable_reg)
+		return 0;
+
 	reg = __raw_readl(clk->enable_reg);
 	reg |= 1 << clk->enable_shift;
 	__raw_writel(reg, clk->enable_reg);
@@ -44,16 +82,19 @@ static int _clk_enable(struct clk *clk)
 	return 0;
 }
 
-static void _clk_disable(struct clk *clk)
+static void clk_pccr_disable(struct clk *clk)
 {
 	unsigned long reg;
 
+	if (!clk->enable_reg)
+		return;
+
 	reg = __raw_readl(clk->enable_reg);
 	reg &= ~(1 << clk->enable_shift);
 	__raw_writel(reg, clk->enable_reg);
 }
 
-static int _clk_spll_enable(struct clk *clk)
+static int clk_spll_enable(struct clk *clk)
 {
 	unsigned long reg;
 
@@ -61,13 +102,12 @@ static int _clk_spll_enable(struct clk *clk)
 	reg |= CCM_CSCR_SPEN;
 	__raw_writel(reg, CCM_CSCR);
 
-	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
-		;
+	while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
 
 	return 0;
 }
 
-static void _clk_spll_disable(struct clk *clk)
+static void clk_spll_disable(struct clk *clk)
 {
 	unsigned long reg;
 
@@ -76,192 +116,30 @@ static void _clk_spll_disable(struct clk *clk)
 	__raw_writel(reg, CCM_CSCR);
 }
 
-static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR0);
-	reg |= mask0;
-	__raw_writel(reg, CCM_PCCR0);
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg |= mask1;
-	__raw_writel(reg, CCM_PCCR1);
-
-}
-
-static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR0);
-	reg &= ~mask0;
-	__raw_writel(reg, CCM_PCCR0);
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg &= ~mask1;
-	__raw_writel(reg, CCM_PCCR1);
-}
-
-static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg |= mask1;
-	__raw_writel(reg, CCM_PCCR1);
-
-	reg = __raw_readl(CCM_PCCR0);
-	reg |= mask0;
-	__raw_writel(reg, CCM_PCCR0);
-}
-
-static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg &= ~mask1;
-	__raw_writel(reg, CCM_PCCR1);
-
-	reg = __raw_readl(CCM_PCCR0);
-	reg &= ~mask0;
-	__raw_writel(reg, CCM_PCCR0);
-}
-
-static int _clk_dma_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
-
-	return 0;
-}
-
-static void _clk_dma_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
-}
-
-static int _clk_rtic_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
-
-	return 0;
-}
-
-static void _clk_rtic_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
-}
-
-static int _clk_emma_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
-
-	return 0;
-}
-
-static void _clk_emma_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
-}
-
-static int _clk_slcdc_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
-
-	return 0;
-}
-
-static void _clk_slcdc_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
-}
-
-static int _clk_fec_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
-
-	return 0;
-}
-
-static void _clk_fec_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
-}
-
-static int _clk_vpu_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK;
-	__raw_writel(reg, CCM_PCCR1);
-
-	return 0;
-}
-
-static void _clk_vpu_disable(struct clk *clk)
+static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
 {
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK);
-	__raw_writel(reg, CCM_PCCR1);
-}
-
-static int _clk_sahara2_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
-
-	return 0;
-}
-
-static void _clk_sahara2_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
-}
-
-static int _clk_mstick1_enable(struct clk *clk)
-{
-	_clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
-
-	return 0;
-}
-
-static void _clk_mstick1_disable(struct clk *clk)
-{
-	_clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
-}
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
-	int cscr = CSCR();
+	int cscr = __raw_readl(CCM_CSCR);
 
 	if (clk->parent == parent)
 		return 0;
 
 	if (mx27_revision() >= CHIP_REV_2_0) {
-		if (parent == &mpll_main_clk[0]) {
+		if (parent == &mpll_main1_clk) {
 			cscr |= CCM_CSCR_ARM_SRC;
 		} else {
-			if (parent == &mpll_main_clk[1])
+			if (parent == &mpll_main2_clk)
 				cscr &= ~CCM_CSCR_ARM_SRC;
 			else
 				return -EINVAL;
 		}
 		__raw_writel(cscr, CCM_CSCR);
-	} else
-		return -ENODEV;
-
-	clk->parent = parent;
-	return 0;
+		clk->parent = parent;
+		return 0;
+	}
+	return -ENODEV;
 }
 
-static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
 {
 	int div;
 	unsigned long parent_rate;
@@ -278,7 +156,7 @@ static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
 	return parent_rate / div;
 }
 
-static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+static int set_rate_cpu(struct clk *clk, unsigned long rate)
 {
 	unsigned int div;
 	uint32_t reg;
@@ -295,19 +173,18 @@ static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
 
 	reg = __raw_readl(CCM_CSCR);
 	if (mx27_revision() >= CHIP_REV_2_0) {
-		reg &= ~CCM_CSCR_ARM_MASK;
-		reg |= div << CCM_CSCR_ARM_OFFSET;
-		reg &= ~0x06;
-		__raw_writel(reg | 0x80000000, CCM_CSCR);
+		reg &= ~(3 << 12);
+		reg |= div << 12;
+		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
+		__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
 	} else {
-		printk(KERN_ERR "Cant set CPU frequency!\n");
+		printk(KERN_ERR "Can't set CPU frequency!\n");
 	}
 
 	return 0;
 }
 
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
-					     unsigned long rate)
+static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
 {
 	u32 div;
 	unsigned long parent_rate;
@@ -324,7 +201,7 @@ static unsigned long _clk_perclkx_round_rate(struct clk *clk,
 	return parent_rate / div;
 }
 
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+static int set_rate_per(struct clk *clk, unsigned long rate)
 {
 	u32 reg;
 	u32 div;
@@ -340,84 +217,65 @@ static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 	div--;
 
-	reg =
-	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
-				       (clk->id << 3));
+	reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
 	reg |= div << (clk->id << 3);
 	__raw_writel(reg, CCM_PCDR1);
 
 	return 0;
 }
 
-static unsigned long _clk_usb_recalc(struct clk *clk)
+static unsigned long get_rate_usb(struct clk *clk)
 {
 	unsigned long usb_pdf;
 	unsigned long parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+	usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
 
 	return parent_rate / (usb_pdf + 1U);
 }
 
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
+static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
 {
-	unsigned long ssi1_pdf;
 	unsigned long parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >>
-					CCM_PCDR0_SSI1BAUDDIV_OFFSET;
-
 	if (mx27_revision() >= CHIP_REV_2_0)
-		ssi1_pdf += 4;
+		pdf += 4;  /* MX27 TO2+ */
 	else
-		ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf;
+		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
 
-	return 2UL * parent_rate / ssi1_pdf;
+	return 2UL * parent_rate / pdf;
 }
 
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
+static unsigned long get_rate_ssi1(struct clk *clk)
 {
-	unsigned long ssi2_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
-	    CCM_PCDR0_SSI2BAUDDIV_OFFSET;
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		ssi2_pdf += 4;
-	else
-		ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf;
+	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
+}
 
-	return 2UL * parent_rate / ssi2_pdf;
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
 }
 
-static unsigned long _clk_nfc_recalc(struct clk *clk)
+static unsigned long get_rate_nfc(struct clk *clk)
 {
 	unsigned long nfc_pdf;
 	unsigned long parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		nfc_pdf =
-		    (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >>
-		    CCM_PCDR0_NFCDIV2_OFFSET;
-	} else {
-		nfc_pdf =
-		    (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >>
-		    CCM_PCDR0_NFCDIV_OFFSET;
-	}
+	if (mx27_revision() >= CHIP_REV_2_0)
+		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
+	else
+		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
 
 	return parent_rate / (nfc_pdf + 1);
 }
 
-static unsigned long _clk_vpu_recalc(struct clk *clk)
+static unsigned long get_rate_vpu(struct clk *clk)
 {
 	unsigned long vpu_pdf;
 	unsigned long parent_rate;
@@ -425,25 +283,27 @@ static unsigned long _clk_vpu_recalc(struct clk *clk)
 	parent_rate = clk_get_rate(clk->parent);
 
 	if (mx27_revision() >= CHIP_REV_2_0) {
-		vpu_pdf =
-		    (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >>
-		    CCM_PCDR0_VPUDIV2_OFFSET;
+		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
 		vpu_pdf += 4;
 	} else {
-		vpu_pdf =
-		    (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >>
-		    CCM_PCDR0_VPUDIV_OFFSET;
+		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
 		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
 	}
+
 	return 2UL * parent_rate / vpu_pdf;
 }
 
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
 {
 	return clk->parent->round_rate(clk->parent, rate);
 }
 
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+static unsigned long get_rate_parent(struct clk *clk)
+{
+	return clk_get_rate(clk->parent);
+}
+
+static int set_rate_parent(struct clk *clk, unsigned long rate)
 {
 	return clk->parent->set_rate(clk->parent, rate);
 }
@@ -451,1112 +311,380 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
 /* in Hz */
 static unsigned long external_high_reference = 26000000;
 
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
+static unsigned long get_rate_high_reference(struct clk *clk)
 {
 	return external_high_reference;
 }
 
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
-	.name = "ckih",
-	.get_rate = get_high_reference_clock_rate,
-};
-
 /* in Hz */
 static unsigned long external_low_reference = 32768;
 
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
+static unsigned long get_rate_low_reference(struct clk *clk)
 {
 	return external_low_reference;
 }
 
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz Could be changed at runtime
- * with a call to change_external_low_reference()
- */
-static struct clk ckil_clk = {
-	.name = "ckil",
-	.get_rate = get_low_reference_clock_rate,
-};
-
-static unsigned long get_mpll_clk(struct clk *clk)
+static unsigned long get_rate_fpm(struct clk *clk)
 {
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_MPCTL0);
-	pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
+	return clk_get_rate(clk->parent) * 1024;
 }
 
-static struct clk mpll_clk = {
-	.name = "mpll",
-	.parent = &ckih_clk,
-	.get_rate = get_mpll_clk,
-};
+static unsigned long get_rate_mpll(struct clk *clk)
+{
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
+			clk_get_rate(clk->parent));
+}
 
-static unsigned long _clk_mpll_main_get_rate(struct clk *clk)
+static unsigned long get_rate_mpll_main(struct clk *clk)
 {
 	unsigned long parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
 	/* i.MX27 TO2:
-	 * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2
-	 * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3
+	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
+	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
 	 */
-
 	if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
 		return 2UL * parent_rate / 3UL;
 
 	return parent_rate;
 }
 
-static struct clk mpll_main_clk[] = {
-	{
-		/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
-		 * It provide the clock source whose rate is same as MPLL
-		 */
-		.name = "mpll_main",
-		.id = 0,
-		.parent = &mpll_clk,
-		.get_rate = _clk_mpll_main_get_rate
-	}, {
-		/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
-		 * It provide the clock source whose rate is same MPLL * 2/3
-		 */
-		.name = "mpll_main",
-		.id = 1,
-		.parent = &mpll_clk,
-		.get_rate = _clk_mpll_main_get_rate
-	}
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
+static unsigned long get_rate_spll(struct clk *clk)
 {
 	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
+	unsigned long rate;
 
-	ref_clk = clk_get_rate(clk->parent);
+	rate = clk_get_rate(clk->parent);
 
 	reg = __raw_readl(CCM_SPCTL0);
-	/*TODO: This is TO2 Bug */
+
+	/* On TO2 we have to write the value back. Otherwise we
+	 * read 0 from this register the next time.
+	 */
 	if (mx27_revision() >= CHIP_REV_2_0)
 		__raw_writel(reg, CCM_SPCTL0);
 
-	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
+	return mxc_decode_pll(reg, rate);
 }
 
-static struct clk spll_clk = {
-	.name = "spll",
-	.parent = &ckih_clk,
-	.get_rate = get_spll_clk,
-	.enable = _clk_spll_enable,
-	.disable = _clk_spll_disable,
-};
-
-static unsigned long get_cpu_clk(struct clk *clk)
+static unsigned long get_rate_cpu(struct clk *clk)
 {
 	u32 div;
 	unsigned long rate;
 
 	if (mx27_revision() >= CHIP_REV_2_0)
-		div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET;
+		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
 	else
-		div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
 
 	rate = clk_get_rate(clk->parent);
 	return rate / (div + 1);
 }
 
-static struct clk cpu_clk = {
-	.name = "cpu_clk",
-	.parent = &mpll_main_clk[1],
-	.set_parent = _clk_cpu_set_parent,
-	.round_rate = _clk_cpu_round_rate,
-	.get_rate = get_cpu_clk,
-	.set_rate = _clk_cpu_set_rate,
-};
-
-static unsigned long get_ahb_clk(struct clk *clk)
+static unsigned long get_rate_ahb(struct clk *clk)
 {
-	unsigned long rate;
-	unsigned long bclk_pdf;
+	unsigned long rate, bclk_pdf;
 
 	if (mx27_revision() >= CHIP_REV_2_0)
-		bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK)
-					>> CCM_CSCR_AHB_OFFSET;
+		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
 	else
-		bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
-					>> CCM_CSCR_BCLK_OFFSET;
+		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
 
 	rate = clk_get_rate(clk->parent);
 	return rate / (bclk_pdf + 1);
 }
 
-static struct clk ahb_clk = {
-	.name = "ahb_clk",
-	.parent = &mpll_main_clk[1],
-	.get_rate = get_ahb_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
+static unsigned long get_rate_ipg(struct clk *clk)
 {
-	unsigned long rate;
-	unsigned long ipg_pdf;
+	unsigned long rate, ipg_pdf;
 
 	if (mx27_revision() >= CHIP_REV_2_0)
 		return clk_get_rate(clk->parent);
 	else
-		ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
 
 	rate = clk_get_rate(clk->parent);
 	return rate / (ipg_pdf + 1);
 }
 
-static struct clk ipg_clk = {
-	.name = "ipg_clk",
-	.parent = &ahb_clk,
-	.get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
+static unsigned long get_rate_per(struct clk *clk)
 {
-	unsigned long perclk_pdf;
-	unsigned long parent_rate;
+	unsigned long perclk_pdf, parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
 	if (clk->id < 0 || clk->id > 3)
 		return 0;
 
-	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+	perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
 
 	return parent_rate / (perclk_pdf + 1);
 }
 
-static struct clk per_clk[] = {
-	{
-		.name = "per_clk",
-		.id = 0,
-		.parent = &mpll_main_clk[1],
-		.get_rate = _clk_perclkx_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_PERCLK1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "per_clk",
-		.id = 1,
-		.parent = &mpll_main_clk[1],
-		.get_rate = _clk_perclkx_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_PERCLK2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "per_clk",
-		.id = 2,
-		.parent = &mpll_main_clk[1],
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_PERCLK3_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "per_clk",
-		.id = 3,
-		.parent = &mpll_main_clk[1],
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_PERCLK4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart1_clk[] = {
-	{
-		.name = "uart_clk",
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &uart1_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART1_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart2_clk[] = {
-	{
-		.name = "uart_clk",
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &uart2_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart3_clk[] = {
-	{
-		.name = "uart_clk",
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &uart3_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart4_clk[] = {
-	{
-		.name = "uart_clk",
-		.id = 3,
-		.parent = &per_clk[0],
-		.secondary = &uart4_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart5_clk[] = {
-	{
-		.name = "uart_clk",
-		.id = 4,
-		.parent = &per_clk[0],
-		.secondary = &uart5_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 4,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART5_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart6_clk[] = {
-	{
-		.name = "uart_clk",
-		.id = 5,
-		.parent = &per_clk[0],
-		.secondary = &uart6_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 5,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART6_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt1_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &gpt1_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT1_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt2_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &gpt2_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt3_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &gpt3_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt4_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 3,
-		.parent = &per_clk[0],
-		.secondary = &gpt4_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt5_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 4,
-		.parent = &per_clk[0],
-		.secondary = &gpt5_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 4,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT5_OFFSET,
-		.disable = _clk_disable,
-	},
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz. Could be changed at runtime
+ * with a call to change_external_high_reference()
+ */
+static struct clk ckih_clk = {
+	.get_rate	= get_rate_high_reference,
 };
 
-static struct clk gpt6_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 5,
-		.parent = &per_clk[0],
-		.secondary = &gpt6_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 5,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT6_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk mpll_clk = {
+	.parent		= &ckih_clk,
+	.get_rate	= get_rate_mpll,
 };
 
-static struct clk pwm_clk[] = {
-	{
-		.name = "pwm_clk",
-		.parent = &per_clk[0],
-		.secondary = &pwm_clk[1],
-	}, {
-		.name = "pwm_clk",
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_PWM_OFFSET,
-		.disable = _clk_disable,
-	},
+/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+ * It provides the clock source whose rate is same as MPLL
+ */
+static struct clk mpll_main1_clk = {
+	.id		= 0,
+	.parent		= &mpll_clk,
+	.get_rate	= get_rate_mpll_main,
 };
 
-static struct clk sdhc1_clk[] = {
-	{
-		.name = "sdhc_clk",
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &sdhc1_clk[1],
-	}, {
-		.name = "sdhc_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SDHC1_OFFSET,
-		.disable = _clk_disable,
-	},
+/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+ * It provides the clock source whose rate is same MPLL * 2 / 3
+ */
+static struct clk mpll_main2_clk = {
+	.id		= 1,
+	.parent		= &mpll_clk,
+	.get_rate	= get_rate_mpll_main,
 };
 
-static struct clk sdhc2_clk[] = {
-	{
-		.name = "sdhc_clk",
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &sdhc2_clk[1],
-	}, {
-		.name = "sdhc_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SDHC2_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk ahb_clk = {
+	.parent		= &mpll_main2_clk,
+	.get_rate	= get_rate_ahb,
 };
 
-static struct clk sdhc3_clk[] = {
-	{
-		.name = "sdhc_clk",
-		.id = 2,
-		.parent = &per_clk[1],
-		.secondary = &sdhc3_clk[1],
-	}, {
-		.name = "sdhc_ipg_clk",
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SDHC3_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk ipg_clk = {
+	.parent		= &ahb_clk,
+	.get_rate	= get_rate_ipg,
 };
 
-static struct clk cspi1_clk[] = {
-	{
-		.name = "cspi_clk",
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &cspi1_clk[1],
-	}, {
-		.name = "cspi_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_CSPI1_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk cpu_clk = {
+	.parent = &mpll_main2_clk,
+	.set_parent = clk_cpu_set_parent,
+	.round_rate = round_rate_cpu,
+	.get_rate = get_rate_cpu,
+	.set_rate = set_rate_cpu,
 };
 
-static struct clk cspi2_clk[] = {
-	{
-		.name = "cspi_clk",
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &cspi2_clk[1],
-	}, {
-		.name = "cspi_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_CSPI2_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk spll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_rate_spll,
+	.enable = clk_spll_enable,
+	.disable = clk_spll_disable,
 };
 
-static struct clk cspi3_clk[] = {
-	{
-		.name = "cspi_clk",
-		.id = 2,
-		.parent = &per_clk[1],
-		.secondary = &cspi3_clk[1],
-	}, {
-		.name = "cspi_ipg_clk",
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_CSPI3_OFFSET,
-		.disable = _clk_disable,
-	},
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+	.get_rate = get_rate_low_reference,
 };
 
-static struct clk lcdc_clk[] = {
-	{
-		.name = "lcdc_clk",
-		.parent = &per_clk[2],
-		.secondary = &lcdc_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.name = "lcdc_ipg_clk",
-		.parent = &ipg_clk,
-		.secondary = &lcdc_clk[2],
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_LCDC_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "lcdc_ahb_clk",
-		.parent = &ahb_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET,
-		.disable = _clk_disable,
-	},
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+	.parent = &ckil_clk,
+	.get_rate = get_rate_fpm,
 };
 
-static struct clk csi_clk[] = {
-	{
-		.name = "csi_perclk",
-		.parent = &per_clk[3],
-		.secondary = &csi_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.name = "csi_ahb_clk",
-		.parent = &ahb_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET,
-		.disable = _clk_disable,
-	},
-};
+#define PCCR0 CCM_PCCR0
+#define PCCR1 CCM_PCCR1
 
-static struct clk usb_clk[] = {
-	{
-		.name = "usb_clk",
-		.parent = &spll_clk,
-		.get_rate = _clk_usb_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_USBOTG_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "usb_ahb_clk",
-		.parent = &ahb_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET,
-		.disable = _clk_disable,
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.enable		= clk_pccr_enable,	\
+		.disable	= clk_pccr_disable,	\
+		.secondary	= s,			\
+		.parent		= p,			\
 	}
-};
 
-static struct clk ssi1_clk[] = {
-	{
-		.name = "ssi_clk",
-		.id = 0,
-		.parent = &mpll_main_clk[1],
-		.secondary = &ssi1_clk[1],
-		.get_rate = _clk_ssi1_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "ssi_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET,
-		.disable = _clk_disable,
-	},
-};
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
+	static struct clk name = {				\
+		.id		= i,				\
+		.enable_reg	= er,				\
+		.enable_shift	= es,				\
+		.get_rate	= get_rate_##getsetround,	\
+		.set_rate	= set_rate_##getsetround,	\
+		.round_rate	= round_rate_##getsetround,	\
+		.enable		= clk_pccr_enable,		\
+		.disable	= clk_pccr_disable,		\
+		.secondary	= s,				\
+		.parent		= p,				\
+	}
 
-static struct clk ssi2_clk[] = {
-	{
-		.name = "ssi_clk",
-		.id = 1,
-		.parent = &mpll_main_clk[1],
-		.secondary = &ssi2_clk[1],
-		.get_rate = _clk_ssi2_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "ssi_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET,
-		.disable = _clk_disable,
+/* Forward declaration to keep the following list in order */
+static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
+		  dma_clk1, lcdc_clk2, vpu_clk1;
+
+/* All clocks we can gate through PCCRx in the order of PCCRx bits */
+DEFINE_CLOCK(ssi2_clk1,    1, PCCR0,  0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ssi1_clk1,    0, PCCR0,  1, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(slcdc_clk,    0, PCCR0,  2, NULL, &slcdc_clk1, &ahb_clk);
+DEFINE_CLOCK(sdhc3_clk1,   0, PCCR0,  3, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc2_clk1,   0, PCCR0,  4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc1_clk1,   0, PCCR0,  5, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(scc_clk,      0, PCCR0,  6, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sahara2_clk,  0, PCCR0,  7, NULL, &sahara2_clk1, &ahb_clk);
+DEFINE_CLOCK(rtic_clk,     0, PCCR0,  8, NULL, &rtic_clk1, &ahb_clk);
+DEFINE_CLOCK(rtc_clk,      0, PCCR0,  9, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk1,     0, PCCR0, 11, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(owire_clk,    0, PCCR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mstick_clk1,  0, PCCR0, 13, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(lcdc_clk1,    0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
+DEFINE_CLOCK(kpp_clk,      0, PCCR0, 15, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(iim_clk,      0, PCCR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c2_clk,     1, PCCR0, 17, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c1_clk,     0, PCCR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt6_clk1,    0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt5_clk1,    0, PCCR0, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt4_clk1,    0, PCCR0, 21, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt3_clk1,    0, PCCR0, 22, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt2_clk1,    0, PCCR0, 23, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt1_clk1,    0, PCCR0, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpio_clk,     0, PCCR0, 25, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(fec_clk,      0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
+DEFINE_CLOCK(emma_clk,     0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
+DEFINE_CLOCK(dma_clk,      0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi13_clk1,  0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk1,   0, PCCR0, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi1_clk1,   0, PCCR0, 31, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(mstick_clk,   0, PCCR1,  2, NULL, &mstick_clk1, &ipg_clk);
+DEFINE_CLOCK(nfc_clk,      0, PCCR1,  3, get_rate_nfc, NULL, &cpu_clk);
+DEFINE_CLOCK(ssi2_clk,     1, PCCR1,  4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(ssi1_clk,     0, PCCR1,  5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(vpu_clk,      0, PCCR1,  6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
+DEFINE_CLOCK1(per4_clk,    3, PCCR1,  7, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per3_clk,    2, PCCR1,  8, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per2_clk,    1, PCCR1,  9, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per1_clk,    0, PCCR1, 10, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK(usb_clk1,     0, PCCR1, 11, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(slcdc_clk1,   0, PCCR1, 12, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk1,    0, PCCR1, 14, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(lcdc_clk2,    0, PCCR1, 15, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(vpu_clk1,     0, PCCR1, 16, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(fec_clk1,     0, PCCR1, 17, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emma_clk1,    0, PCCR1, 18, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(ata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
+DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart5_clk1,   0, PCCR1, 27, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart4_clk1,   0, PCCR1, 28, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart3_clk1,   0, PCCR1, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
+
+/* Clocks we cannot directly gate, but drivers need their rates */
+DEFINE_CLOCK(cspi1_clk,    0, 0,      0, NULL, &cspi1_clk1, &per2_clk);
+DEFINE_CLOCK(cspi2_clk,    1, 0,      0, NULL, &cspi2_clk1, &per2_clk);
+DEFINE_CLOCK(cspi3_clk,    2, 0,      0, NULL, &cspi13_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc1_clk,    0, 0,      0, NULL, &sdhc1_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc2_clk,    1, 0,      0, NULL, &sdhc2_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc3_clk,    2, 0,      0, NULL, &sdhc3_clk1, &per2_clk);
+DEFINE_CLOCK(pwm_clk,      0, 0,      0, NULL, &pwm_clk1, &per1_clk);
+DEFINE_CLOCK(gpt1_clk,     0, 0,      0, NULL, &gpt1_clk1, &per1_clk);
+DEFINE_CLOCK(gpt2_clk,     1, 0,      0, NULL, &gpt2_clk1, &per1_clk);
+DEFINE_CLOCK(gpt3_clk,     2, 0,      0, NULL, &gpt3_clk1, &per1_clk);
+DEFINE_CLOCK(gpt4_clk,     3, 0,      0, NULL, &gpt4_clk1, &per1_clk);
+DEFINE_CLOCK(gpt5_clk,     4, 0,      0, NULL, &gpt5_clk1, &per1_clk);
+DEFINE_CLOCK(gpt6_clk,     5, 0,      0, NULL, &gpt6_clk1, &per1_clk);
+DEFINE_CLOCK(uart1_clk,    0, 0,      0, NULL, &uart1_clk1, &per1_clk);
+DEFINE_CLOCK(uart2_clk,    1, 0,      0, NULL, &uart2_clk1, &per1_clk);
+DEFINE_CLOCK(uart3_clk,    2, 0,      0, NULL, &uart3_clk1, &per1_clk);
+DEFINE_CLOCK(uart4_clk,    3, 0,      0, NULL, &uart4_clk1, &per1_clk);
+DEFINE_CLOCK(uart5_clk,    4, 0,      0, NULL, &uart5_clk1, &per1_clk);
+DEFINE_CLOCK(uart6_clk,    5, 0,      0, NULL, &uart6_clk1, &per1_clk);
+DEFINE_CLOCK1(lcdc_clk,    0, 0,      0, parent, &lcdc_clk1, &per3_clk);
+DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
 	},
-};
-
-static struct clk nfc_clk = {
-	.name = "nfc_clk",
-	.parent = &cpu_clk,
-	.get_rate = _clk_nfc_recalc,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk vpu_clk = {
-	.name = "vpu_clk",
-	.parent = &mpll_main_clk[1],
-	.get_rate = _clk_vpu_recalc,
-	.enable = _clk_vpu_enable,
-	.disable = _clk_vpu_disable,
-};
-
-static struct clk dma_clk = {
-	.name = "dma_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_dma_enable,
-	.disable = _clk_dma_disable,
-};
-
-static struct clk rtic_clk = {
-	.name = "rtic_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_rtic_enable,
-	.disable = _clk_rtic_disable,
-};
 
-static struct clk brom_clk = {
-	.name = "brom_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk emma_clk = {
-	.name = "emma_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_emma_enable,
-	.disable = _clk_emma_disable,
-};
-
-static struct clk slcdc_clk = {
-	.name = "slcdc_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_slcdc_enable,
-	.disable = _clk_slcdc_disable,
-};
-
-static struct clk fec_clk = {
-	.name = "fec_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_fec_enable,
-	.disable = _clk_fec_disable,
-};
-
-static struct clk emi_clk = {
-	.name = "emi_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk sahara2_clk = {
-	.name = "sahara_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_sahara2_enable,
-	.disable = _clk_sahara2_disable,
-};
-
-static struct clk ata_clk = {
-	.name = "ata_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mstick1_clk = {
-	.name = "mstick1_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_mstick1_enable,
-	.disable = _clk_mstick1_disable,
-};
-
-static struct clk wdog_clk = {
-	.name = "wdog_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_WDT_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
-	.name = "gpio_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR0_GPIO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk i2c_clk[] = {
-	{
-		.name = "i2c_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_I2C1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "i2c_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_I2C2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk iim_clk = {
-	.name = "iim_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_IIM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
-	.name = "kpp_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_KPP_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
-	.name = "owire_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_OWIRE_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
-	.name = "rtc_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_RTC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk scc_clk = {
-	.name = "scc_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_SCC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		div = 8;
-
-	return parent_rate / div;
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK;
-	reg |= div << CCM_PCDR0_CLKODIV_OFFSET;
-	__raw_writel(reg, CCM_PCDR0);
-
-	return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >>
-		CCM_PCDR0_CLKODIV_OFFSET;
-	div++;
-
-	return parent_rate / div;
-}
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
-	if (parent == &ckil_clk)
-		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ckih_clk)
-		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == mpll_clk.parent)
-		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == spll_clk.parent)
-		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &mpll_clk)
-		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &spll_clk)
-		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &cpu_clk)
-		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ahb_clk)
-		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ipg_clk)
-		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[0])
-		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[1])
-		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[2])
-		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[3])
-		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi1_clk[0])
-		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi2_clk[0])
-		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &nfc_clk)
-		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &mstick1_clk)
-		reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &vpu_clk)
-		reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &usb_clk[0])
-		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, CCM_CCSR);
-
-	return 0;
-}
-
-static int _clk_clko_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN;
-	__raw_writel(reg, CCM_PCDR0);
-
-	return 0;
-}
-
-static void _clk_clko_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN;
-	__raw_writel(reg, CCM_PCDR0);
-}
-
-static struct clk clko_clk = {
-	.name = "clko_clk",
-	.get_rate = _clk_clko_recalc,
-	.set_rate = _clk_clko_set_rate,
-	.round_rate = _clk_clko_round_rate,
-	.set_parent = _clk_clko_set_parent,
-	.enable = _clk_clko_enable,
-	.disable = _clk_clko_disable,
-};
-
-static struct clk *mxc_clks[] = {
-	&ckih_clk,
-	&ckil_clk,
-	&mpll_clk,
-	&mpll_main_clk[0],
-	&mpll_main_clk[1],
-	&spll_clk,
-	&cpu_clk,
-	&ahb_clk,
-	&ipg_clk,
-	&per_clk[0],
-	&per_clk[1],
-	&per_clk[2],
-	&per_clk[3],
-	&clko_clk,
-	&uart1_clk[0],
-	&uart1_clk[1],
-	&uart2_clk[0],
-	&uart2_clk[1],
-	&uart3_clk[0],
-	&uart3_clk[1],
-	&uart4_clk[0],
-	&uart4_clk[1],
-	&uart5_clk[0],
-	&uart5_clk[1],
-	&uart6_clk[0],
-	&uart6_clk[1],
-	&gpt1_clk[0],
-	&gpt1_clk[1],
-	&gpt2_clk[0],
-	&gpt2_clk[1],
-	&gpt3_clk[0],
-	&gpt3_clk[1],
-	&gpt4_clk[0],
-	&gpt4_clk[1],
-	&gpt5_clk[0],
-	&gpt5_clk[1],
-	&gpt6_clk[0],
-	&gpt6_clk[1],
-	&pwm_clk[0],
-	&pwm_clk[1],
-	&sdhc1_clk[0],
-	&sdhc1_clk[1],
-	&sdhc2_clk[0],
-	&sdhc2_clk[1],
-	&sdhc3_clk[0],
-	&sdhc3_clk[1],
-	&cspi1_clk[0],
-	&cspi1_clk[1],
-	&cspi2_clk[0],
-	&cspi2_clk[1],
-	&cspi3_clk[0],
-	&cspi3_clk[1],
-	&lcdc_clk[0],
-	&lcdc_clk[1],
-	&lcdc_clk[2],
-	&csi_clk[0],
-	&csi_clk[1],
-	&usb_clk[0],
-	&usb_clk[1],
-	&ssi1_clk[0],
-	&ssi1_clk[1],
-	&ssi2_clk[0],
-	&ssi2_clk[1],
-	&nfc_clk,
-	&vpu_clk,
-	&dma_clk,
-	&rtic_clk,
-	&brom_clk,
-	&emma_clk,
-	&slcdc_clk,
-	&fec_clk,
-	&emi_clk,
-	&sahara2_clk,
-	&ata_clk,
-	&mstick1_clk,
-	&wdog_clk,
-	&gpio_clk,
-	&i2c_clk[0],
-	&i2c_clk[1],
-	&iim_clk,
-	&kpp_clk,
-	&owire_clk,
-	&rtc_clk,
-	&scc_clk,
-};
-
-void __init change_external_low_reference(unsigned long new_ref)
-{
-	external_low_reference = new_ref;
-}
-
-unsigned long __init clk_early_get_timer_rate(void)
-{
-	return clk_get_rate(&per_clk[0]);
-}
-
-static void __init probe_mxc_clocks(void)
-{
-	int i;
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
+	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
+	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
+	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
+	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
+	_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
+	_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
+	_REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
+	_REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
+	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "csi", csi_clk)
+	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
+	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk)
+	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
+	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+};
+
+/* Adjust the clock path for TO2 and later */
+static void __init to2_adjust_clocks(void)
+{
+	unsigned long cscr = __raw_readl(CCM_CSCR);
 
 	if (mx27_revision() >= CHIP_REV_2_0) {
-		if (CSCR() & 0x8000)
-			cpu_clk.parent = &mpll_main_clk[0];
+		if (cscr & CCM_CSCR_ARM_SRC)
+			cpu_clk.parent = &mpll_main1_clk;
 
-		if (!(CSCR() & 0x00800000))
-			ssi2_clk[0].parent = &spll_clk;
+		if (!(cscr & CCM_CSCR_SSI2))
+			ssi1_clk.parent = &spll_clk;
 
-		if (!(CSCR() & 0x00400000))
-			ssi1_clk[0].parent = &spll_clk;
+		if (!(cscr & CCM_CSCR_SSI1))
+			ssi1_clk.parent = &spll_clk;
 
-		if (!(CSCR() & 0x00200000))
+		if (!(cscr & CCM_CSCR_VPU))
 			vpu_clk.parent = &spll_clk;
 	} else {
 		cpu_clk.parent = &mpll_clk;
@@ -1565,11 +693,13 @@ static void __init probe_mxc_clocks(void)
 		cpu_clk.set_rate = NULL;
 		ahb_clk.parent = &mpll_clk;
 
-		for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++)
-			per_clk[i].parent = &mpll_clk;
+		per1_clk.parent = &mpll_clk;
+		per2_clk.parent = &mpll_clk;
+		per3_clk.parent = &mpll_clk;
+		per4_clk.parent = &mpll_clk;
 
-		ssi1_clk[0].parent = &mpll_clk;
-		ssi2_clk[0].parent = &mpll_clk;
+		ssi1_clk.parent = &mpll_clk;
+		ssi2_clk.parent = &mpll_clk;
 
 		vpu_clk.parent = &mpll_clk;
 	}
@@ -1579,47 +709,47 @@ static void __init probe_mxc_clocks(void)
  * must be called very early to get information about the
  * available clock rate when the timer framework starts
  */
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx27_clocks_init(unsigned long fref)
 {
-	u32 cscr;
-	struct clk **clkp;
+	u32 cscr = __raw_readl(CCM_CSCR);
+	int i;
 
 	external_high_reference = fref;
 
-	/* detect clock reference for both system PLL */
-	cscr = CSCR();
+	/* detect clock reference for both system PLLs */
 	if (cscr & CCM_CSCR_MCU)
 		mpll_clk.parent = &ckih_clk;
 	else
-		mpll_clk.parent = &ckil_clk;
+		mpll_clk.parent = &fpm_clk;
 
 	if (cscr & CCM_CSCR_SP)
 		spll_clk.parent = &ckih_clk;
 	else
-		spll_clk.parent = &ckil_clk;
+		spll_clk.parent = &fpm_clk;
 
-	probe_mxc_clocks();
+	to2_adjust_clocks();
 
-	per_clk[0].enable(&per_clk[0]);
-	gpt1_clk[1].enable(&gpt1_clk[1]);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
+	/* Turn off all clocks we do not need */
+	__raw_writel(0, CCM_PCCR0);
+	__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
 
-	/* Turn off all possible clocks */
-	__raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0);
-	__raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK,
-		     CCM_PCCR1);
 	spll_clk.disable(&spll_clk);
 
-	/* This will propagate to all children and init all the clock rates */
-
-	clk_enable(&emi_clk);
+	/* enable basic clocks */
+	clk_enable(&per1_clk);
 	clk_enable(&gpio_clk);
+	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
-	clk_enable(&gpt1_clk[0]);
+
 #ifdef CONFIG_DEBUG_LL_CONSOLE
-	clk_enable(&uart1_clk[0]);
+	clk_enable(&uart1_clk);
 #endif
+
+	mxc_timer_init(&gpt1_clk);
+
 	return 0;
 }
+
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index 239308fe665..d9e3bf9644c 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -26,11 +26,11 @@
 
 #include <mach/hardware.h>
 
-#include "crm_regs.h"
-
 static int cpu_silicon_rev = -1;
 static int cpu_partnumber;
 
+#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
+
 static void query_silicon_parameter(void)
 {
 	u32 val;
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
index 94644cd0a0f..749de76b3f9 100644
--- a/arch/arm/mach-mx2/crm_regs.h
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -38,42 +38,36 @@
 #define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
 #define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
 
-#define CCM_CSCR_USB_OFFSET     28
-#define CCM_CSCR_USB_MASK       (0x7 << 28)
+#define CCM_CSCR_PRESC_OFFSET   29
+#define CCM_CSCR_PRESC_MASK     (0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET     26
+#define CCM_CSCR_USB_MASK       (0x7 << CCM_CSCR_USB_OFFSET)
 #define CCM_CSCR_SD_OFFSET      24
-#define CCM_CSCR_SD_MASK        (0x3 << 24)
-#define CCM_CSCR_SSI2           (1 << 23)
-#define CCM_CSCR_SSI2_OFFSET    23
-#define CCM_CSCR_SSI1           (1 << 22)
-#define CCM_CSCR_SSI1_OFFSET    22
-#define CCM_CSCR_VPU           (1 << 21)
-#define CCM_CSCR_VPU_OFFSET    21
-#define CCM_CSCR_MSHC           (1 << 20)
-#define CCM_CSCR_SPLLRES        (1 << 19)
-#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SD_MASK        (0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES        (1 << 22)
+#define CCM_CSCR_MPLLRES        (1 << 21)
+#define CCM_CSCR_SSI2_OFFSET    20
+#define CCM_CSCR_SSI2           (1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET    19
+#define CCM_CSCR_SSI1           (1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET    	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
 #define CCM_CSCR_SP             (1 << 17)
 #define CCM_CSCR_MCU            (1 << 16)
-/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_ARM_SRC        (1 << 15)
-#define CCM_CSCR_ARM_OFFSET     12
-#define CCM_CSCR_ARM_MASK       (0x3 << 12)
-/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_PRESC_OFFSET   13
-#define CCM_CSCR_PRESC_MASK     (0x7 << 13)
-#define CCM_CSCR_BCLK_OFFSET    9
-#define CCM_CSCR_BCLK_MASK      (0xf << 9)
-#define CCM_CSCR_IPDIV_OFFSET   8
-#define CCM_CSCR_IPDIV          (1 << 8)
-/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_AHB_OFFSET     8
-#define CCM_CSCR_AHB_MASK       (0x3 << 8)
-/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK      (0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET   9
+#define CCM_CSCR_IPDIV          (1 << CCM_CSCR_IPDIV_OFFSET)
+
 #define CCM_CSCR_OSC26MDIV      (1 << 4)
 #define CCM_CSCR_OSC26M         (1 << 3)
 #define CCM_CSCR_FPM            (1 << 2)
 #define CCM_CSCR_SPEN           (1 << 1)
 #define CCM_CSCR_MPEN           1
 
+
+
 #define CCM_MPCTL0_CPLM         (1 << 31)
 #define CCM_MPCTL0_PD_OFFSET    26
 #define CCM_MPCTL0_PD_MASK      (0xf << 26)
@@ -109,25 +103,14 @@
 
 #define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
 #define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
-#define CCM_PCDR0_CLKO_EN               25
-#define CCM_PCDR0_CLKODIV_OFFSET        22
-#define CCM_PCDR0_CLKODIV_MASK          (0x7 << 22)
 #define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
 #define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
-/*The difinition for i.MX27 TO2*/
-#define CCM_PCDR0_VPUDIV2_OFFSET        10
-#define CCM_PCDR0_VPUDIV2_MASK          (0x3f << 10)
-#define CCM_PCDR0_NFCDIV2_OFFSET         6
-#define CCM_PCDR0_NFCDIV2_MASK           (0xf << 6)
-#define CCM_PCDR0_MSHCDIV2_MASK          0x3f
-/*The difinition for i.MX27 TO2*/
 #define CCM_PCDR0_NFCDIV_OFFSET         12
 #define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
-#define CCM_PCDR0_VPUDIV_OFFSET        8
-#define CCM_PCDR0_VPUDIV_MASK          (0xf << 8)
-#define CCM_PCDR0_MSHCDIV_OFFSET        0
-#define CCM_PCDR0_MSHCDIV_MASK          0x1f
-
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
 #define CCM_PCDR1_PERDIV4_OFFSET        24
 #define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
 #define CCM_PCDR1_PERDIV3_OFFSET        16
@@ -137,133 +120,135 @@
 #define CCM_PCDR1_PERDIV1_OFFSET        0
 #define CCM_PCDR1_PERDIV1_MASK          0x3f
 
-#define CCM_PCCR0_CSPI1_OFFSET          31
-#define CCM_PCCR0_CSPI1_MASK            (1 << 31)
-#define CCM_PCCR0_CSPI2_OFFSET          30
-#define CCM_PCCR0_CSPI2_MASK            (1 << 30)
-#define CCM_PCCR0_CSPI3_OFFSET          29
-#define CCM_PCCR0_CSPI3_MASK            (1 << 29)
-#define CCM_PCCR0_DMA_OFFSET            28
-#define CCM_PCCR0_DMA_MASK              (1 << 28)
-#define CCM_PCCR0_EMMA_OFFSET           27
-#define CCM_PCCR0_EMMA_MASK             (1 << 27)
-#define CCM_PCCR0_FEC_OFFSET            26
-#define CCM_PCCR0_FEC_MASK              (1 << 26)
-#define CCM_PCCR0_GPIO_OFFSET           25
-#define CCM_PCCR0_GPIO_MASK             (1 << 25)
-#define CCM_PCCR0_GPT1_OFFSET           24
-#define CCM_PCCR0_GPT1_MASK             (1 << 24)
-#define CCM_PCCR0_GPT2_OFFSET           23
-#define CCM_PCCR0_GPT2_MASK             (1 << 23)
-#define CCM_PCCR0_GPT3_OFFSET           22
-#define CCM_PCCR0_GPT3_MASK             (1 << 22)
-#define CCM_PCCR0_GPT4_OFFSET           21
-#define CCM_PCCR0_GPT4_MASK             (1 << 21)
-#define CCM_PCCR0_GPT5_OFFSET           20
-#define CCM_PCCR0_GPT5_MASK             (1 << 20)
-#define CCM_PCCR0_GPT6_OFFSET           19
-#define CCM_PCCR0_GPT6_MASK             (1 << 19)
-#define CCM_PCCR0_I2C1_OFFSET           18
-#define CCM_PCCR0_I2C1_MASK             (1 << 18)
-#define CCM_PCCR0_I2C2_OFFSET           17
-#define CCM_PCCR0_I2C2_MASK             (1 << 17)
-#define CCM_PCCR0_IIM_OFFSET            16
-#define CCM_PCCR0_IIM_MASK              (1 << 16)
-#define CCM_PCCR0_KPP_OFFSET            15
-#define CCM_PCCR0_KPP_MASK              (1 << 15)
-#define CCM_PCCR0_LCDC_OFFSET           14
-#define CCM_PCCR0_LCDC_MASK             (1 << 14)
-#define CCM_PCCR0_MSHC_OFFSET           13
-#define CCM_PCCR0_MSHC_MASK             (1 << 13)
-#define CCM_PCCR0_OWIRE_OFFSET          12
-#define CCM_PCCR0_OWIRE_MASK            (1 << 12)
-#define CCM_PCCR0_PWM_OFFSET            11
-#define CCM_PCCR0_PWM_MASK              (1 << 11)
-#define CCM_PCCR0_RTC_OFFSET            9
-#define CCM_PCCR0_RTC_MASK              (1 << 9)
-#define CCM_PCCR0_RTIC_OFFSET           8
-#define CCM_PCCR0_RTIC_MASK             (1 << 8)
-#define CCM_PCCR0_SAHARA_OFFSET         7
-#define CCM_PCCR0_SAHARA_MASK           (1 << 7)
-#define CCM_PCCR0_SCC_OFFSET            6
-#define CCM_PCCR0_SCC_MASK              (1 << 6)
-#define CCM_PCCR0_SDHC1_OFFSET          5
-#define CCM_PCCR0_SDHC1_MASK            (1 << 5)
-#define CCM_PCCR0_SDHC2_OFFSET          4
-#define CCM_PCCR0_SDHC2_MASK            (1 << 4)
-#define CCM_PCCR0_SDHC3_OFFSET          3
-#define CCM_PCCR0_SDHC3_MASK            (1 << 3)
-#define CCM_PCCR0_SLCDC_OFFSET          2
-#define CCM_PCCR0_SLCDC_MASK            (1 << 2)
-#define CCM_PCCR0_SSI1_IPG_OFFSET       1
-#define CCM_PCCR0_SSI1_IPG_MASK         (1 << 1)
-#define CCM_PCCR0_SSI2_IPG_OFFSET       0
-#define CCM_PCCR0_SSI2_IPG_MASK         (1 << 0)
+#define CCM_PCCR_HCLK_CSI_OFFSET       	31
+#define CCM_PCCR_HCLK_CSI_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET       	30
+#define CCM_PCCR_HCLK_DMA_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET      	28
+#define CCM_PCCR_HCLK_BROM_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET      	27
+#define CCM_PCCR_HCLK_EMMA_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET      	26
+#define CCM_PCCR_HCLK_LCDC_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET     	25
+#define CCM_PCCR_HCLK_SLCDC_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET    	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET    	23
+#define CCM_PCCR_BMI_MASK          	(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG	    	CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET        	22
+#define CCM_PCCR_PERCLK4_REG	    	CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET          	21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET       20
+#define CCM_PCCR_FIRI_BAUD_MASK         (1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG	        CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET           	18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET      	17
+#define CCM_PCCR_SSI1_BAUD_REG	    	CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET      	16
+#define CCM_PCCR_SSI2_BAUD_REG	    	CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET           	15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET         	14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET            	13
+#define CCM_PCCR_DMA_REG            	CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET           	12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET           	11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET          	10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET          	9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET       	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET       	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET          	3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET          	2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET          	1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET          	0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET          	31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET            	30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET            	29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET            	28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET           	27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET           	26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET           	25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET            	24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK            	(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK            	(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK            	(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK              	(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK             	(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK             	(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK             	(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK             	(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK             	(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK         	(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK         	(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK        	(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK        	(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK       	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK      	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK             	(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK              	(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK             	(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK            	(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK          	(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK              	(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK              	(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK            	(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK            	(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK            	(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK        	(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK         	(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK        	(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK         	(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK            	(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK            	(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK            	(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK            	(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK           	(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK              	(1 << CCM_PCCR_WDT_OFFSET)
 
-#define CCM_PCCR1_UART1_OFFSET          31
-#define CCM_PCCR1_UART1_MASK            (1 << 31)
-#define CCM_PCCR1_UART2_OFFSET          30
-#define CCM_PCCR1_UART2_MASK            (1 << 30)
-#define CCM_PCCR1_UART3_OFFSET          29
-#define CCM_PCCR1_UART3_MASK            (1 << 29)
-#define CCM_PCCR1_UART4_OFFSET          28
-#define CCM_PCCR1_UART4_MASK            (1 << 28)
-#define CCM_PCCR1_UART5_OFFSET          27
-#define CCM_PCCR1_UART5_MASK            (1 << 27)
-#define CCM_PCCR1_UART6_OFFSET          26
-#define CCM_PCCR1_UART6_MASK            (1 << 26)
-#define CCM_PCCR1_USBOTG_OFFSET         25
-#define CCM_PCCR1_USBOTG_MASK           (1 << 25)
-#define CCM_PCCR1_WDT_OFFSET            24
-#define CCM_PCCR1_WDT_MASK              (1 << 24)
-#define CCM_PCCR1_HCLK_ATA_OFFSET       23
-#define CCM_PCCR1_HCLK_ATA_MASK         (1 << 23)
-#define CCM_PCCR1_HCLK_BROM_OFFSET      22
-#define CCM_PCCR1_HCLK_BROM_MASK        (1 << 22)
-#define CCM_PCCR1_HCLK_CSI_OFFSET       21
-#define CCM_PCCR1_HCLK_CSI_MASK         (1 << 21)
-#define CCM_PCCR1_HCLK_DMA_OFFSET       20
-#define CCM_PCCR1_HCLK_DMA_MASK         (1 << 20)
-#define CCM_PCCR1_HCLK_EMI_OFFSET       19
-#define CCM_PCCR1_HCLK_EMI_MASK         (1 << 19)
-#define CCM_PCCR1_HCLK_EMMA_OFFSET      18
-#define CCM_PCCR1_HCLK_EMMA_MASK        (1 << 18)
-#define CCM_PCCR1_HCLK_FEC_OFFSET       17
-#define CCM_PCCR1_HCLK_FEC_MASK         (1 << 17)
-#define CCM_PCCR1_HCLK_VPU_OFFSET       16
-#define CCM_PCCR1_HCLK_VPU_MASK         (1 << 16)
-#define CCM_PCCR1_HCLK_LCDC_OFFSET      15
-#define CCM_PCCR1_HCLK_LCDC_MASK        (1 << 15)
-#define CCM_PCCR1_HCLK_RTIC_OFFSET      14
-#define CCM_PCCR1_HCLK_RTIC_MASK        (1 << 14)
-#define CCM_PCCR1_HCLK_SAHARA_OFFSET    13
-#define CCM_PCCR1_HCLK_SAHARA_MASK      (1 << 13)
-#define CCM_PCCR1_HCLK_SLCDC_OFFSET     12
-#define CCM_PCCR1_HCLK_SLCDC_MASK       (1 << 12)
-#define CCM_PCCR1_HCLK_USBOTG_OFFSET    11
-#define CCM_PCCR1_HCLK_USBOTG_MASK      (1 << 11)
-#define CCM_PCCR1_PERCLK1_OFFSET        10
-#define CCM_PCCR1_PERCLK1_MASK          (1 << 10)
-#define CCM_PCCR1_PERCLK2_OFFSET        9
-#define CCM_PCCR1_PERCLK2_MASK          (1 << 9)
-#define CCM_PCCR1_PERCLK3_OFFSET        8
-#define CCM_PCCR1_PERCLK3_MASK          (1 << 8)
-#define CCM_PCCR1_PERCLK4_OFFSET        7
-#define CCM_PCCR1_PERCLK4_MASK          (1 << 7)
-#define CCM_PCCR1_VPU_BAUD_OFFSET       6
-#define CCM_PCCR1_VPU_BAUD_MASK         (1 << 6)
-#define CCM_PCCR1_SSI1_BAUD_OFFSET      5
-#define CCM_PCCR1_SSI1_BAUD_MASK        (1 << 5)
-#define CCM_PCCR1_SSI2_BAUD_OFFSET      4
-#define CCM_PCCR1_SSI2_BAUD_MASK        (1 << 4)
-#define CCM_PCCR1_NFC_BAUD_OFFSET       3
-#define CCM_PCCR1_NFC_BAUD_MASK         (1 << 3)
-#define CCM_PCCR1_MSHC_BAUD_OFFSET      2
-#define CCM_PCCR1_MSHC_BAUD_MASK        (1 << 2)
 
 #define CCM_CCSR_32KSR          (1 << 15)
+
 #define CCM_CCSR_CLKMODE1       (1 << 9)
 #define CCM_CCSR_CLKMODE0       (1 << 8)
+
 #define CCM_CCSR_CLKOSEL_OFFSET 0
 #define CCM_CCSR_CLKOSEL_MASK   0x1f
 
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 2f9240be1c7..f81aa8a8fbb 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -34,6 +34,10 @@
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
 
 /*
  * Resource definition for the MXC IrDA
@@ -225,37 +229,217 @@ struct platform_device mxc_nand_device = {
 	.resource = mxc_nand_resources,
 };
 
+#ifdef CONFIG_FB_IMX
+/*
+ * lcdc:
+ * - i.MX1: the basic controller
+ * - i.MX21: to be checked
+ * - i.MX27: like i.MX1, with slightly variations
+ */
+static struct resource mxc_fb[] = {
+	{
+		.start = LCDC_BASE_ADDR,
+		.end   = LCDC_BASE_ADDR + 0xFFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MXC_INT_LCDC,
+		.end   = MXC_INT_LCDC,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* mxc lcd driver */
+struct platform_device mxc_fb_device = {
+	.name = "imx-fb",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fb),
+	.resource = mxc_fb,
+	.dev = {
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+};
+#endif
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_fec_resources[] = {
+	{
+		.start	= FEC_BASE_ADDR,
+		.end	= FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC_INT_FEC,
+		.end	= MXC_INT_FEC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_fec_device = {
+	.name = "fec",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fec_resources),
+	.resource = mxc_fec_resources,
+};
+#endif
+
+static struct resource mxc_i2c_1_resources[] = {
+	[0] = {
+		.start	= I2C_BASE_ADDR,
+		.end	= I2C_BASE_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= MXC_INT_I2C,
+		.end	= MXC_INT_I2C,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+	.resource = mxc_i2c_1_resources
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_i2c_2_resources[] = {
+	[0] = {
+		.start	= I2C2_BASE_ADDR,
+		.end	= I2C2_BASE_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= MXC_INT_I2C2,
+		.end	= MXC_INT_I2C2,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+	.resource = mxc_i2c_2_resources
+};
+#endif
+
+static struct resource mxc_pwm_resources[] = {
+	[0] = {
+		.start	= PWM_BASE_ADDR,
+		.end	= PWM_BASE_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start   = MXC_INT_PWM,
+		.end     = MXC_INT_PWM,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device = {
+	.name = "mxc_pwm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
+	.resource = mxc_pwm_resources
+};
+
+/*
+ * Resource definition for the MXC SDHC
+ */
+static struct resource mxc_sdhc1_resources[] = {
+	[0] = {
+			.start = SDHC1_BASE_ADDR,
+			.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+			},
+	[1] = {
+			.start = MXC_INT_SDHC1,
+			.end   = MXC_INT_SDHC1,
+			.flags = IORESOURCE_IRQ,
+			},
+	[2] = {
+			.start  = DMA_REQ_SDHC1,
+			.end    = DMA_REQ_SDHC1,
+			.flags  = IORESOURCE_DMA
+		},
+};
+
+static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
+
+struct platform_device mxc_sdhc_device0 = {
+       .name           = "mxc-mmc",
+       .id             = 0,
+       .dev            = {
+               .dma_mask = &mxc_sdhc1_dmamask,
+               .coherent_dma_mask = 0xffffffff,
+       },
+       .num_resources  = ARRAY_SIZE(mxc_sdhc1_resources),
+       .resource       = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_sdhc2_resources[] = {
+	[0] = {
+			.start = SDHC2_BASE_ADDR,
+			.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+			},
+	[1] = {
+			.start = MXC_INT_SDHC2,
+			.end   = MXC_INT_SDHC2,
+			.flags = IORESOURCE_IRQ,
+			},
+	[2] = {
+			.start  = DMA_REQ_SDHC2,
+			.end    = DMA_REQ_SDHC2,
+			.flags  = IORESOURCE_DMA
+		},
+};
+
+static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
+
+struct platform_device mxc_sdhc_device1 = {
+       .name           = "mxc-mmc",
+       .id             = 1,
+       .dev            = {
+               .dma_mask = &mxc_sdhc2_dmamask,
+               .coherent_dma_mask = 0xffffffff,
+       },
+       .num_resources  = ARRAY_SIZE(mxc_sdhc2_resources),
+       .resource       = mxc_sdhc2_resources,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
 	},
 	[1] = {
 		.chip.label = "gpio-1",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
 	},
 	[2] = {
 		.chip.label = "gpio-2",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
 	},
 	[3] = {
 		.chip.label = "gpio-3",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	},
 	[4] = {
 		.chip.label = "gpio-4",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
 	},
 	[5] = {
 		.chip.label = "gpio-5",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
 	}
 };
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 1e8cb577a64..049005bb6aa 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -1,4 +1,3 @@
-
 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
 extern struct platform_device mxc_gpt3;
@@ -14,3 +13,10 @@ extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mxc_nand_device;
+extern struct platform_device mxc_fb_device;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_pwm_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index dea6521d4d5..bd51dd04948 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 2b5c67f5457..4a3b097adc1 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -31,7 +31,7 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
 #include <mach/board-mx27ads.h>
 
 #include "devices.h"
@@ -135,6 +135,7 @@ static int uart_mxc_port3_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart3_pins,
 			ARRAY_SIZE(mxc_uart3_pins));
+	return 0;
 }
 
 static int mxc_uart4_pins[] = {
@@ -179,6 +180,7 @@ static int uart_mxc_port5_exit(struct platform_device *pdev)
 
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
+	&mxc_fec_device,
 };
 
 static int mxc_fec_pins[] = {
@@ -196,7 +198,7 @@ static int mxc_fec_pins[] = {
 	PD11_AOUT_FEC_TX_CLK,
 	PD12_AOUT_FEC_RXD0,
 	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_CLR,
+	PD14_AOUT_FEC_RX_CLK,
 	PD15_AOUT_FEC_COL,
 	PD16_AIN_FEC_TX_ER,
 	PF23_AIN_FEC_TX_EN
@@ -208,12 +210,6 @@ static void gpio_fec_active(void)
 			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }
 
-static void gpio_fec_inactive(void)
-{
-	mxc_gpio_release_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins));
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
 		.init = uart_mxc_port0_init,
@@ -263,11 +259,10 @@ static void __init mx27ads_timer_init(void)
 	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
 		fref = 27000000;
 
-	mxc_clocks_init(fref);
-	mxc_timer_init("gpt_clk.0");
+	mx27_clocks_init(fref);
 }
 
-struct sys_timer mx27ads_timer = {
+static struct sys_timer mx27ads_timer = {
 	.init	= mx27ads_timer_init,
 };
 
@@ -280,7 +275,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
 	},
 };
 
-void __init mx27ads_map_io(void)
+static void __init mx27ads_map_io(void)
 {
 	mxc_map_io();
 	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index dfd4156da7d..aa4eaa61d1b 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -20,11 +20,18 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
 #include <asm/mach/time.h>
 #include <mach/imx-uart.h>
 #include <mach/board-pcm038.h>
@@ -121,10 +128,10 @@ static int uart_mxc_port1_exit(struct platform_device *pdev)
 	return 0;
 }
 
-static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
+static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
 				PE9_PF_UART3_RXD,
 				PE10_PF_UART3_CTS,
-				PE9_PF_UART3_RXD };
+				PE11_PF_UART3_RTS };
 
 static int uart_mxc_port2_init(struct platform_device *pdev)
 {
@@ -170,7 +177,7 @@ static int mxc_fec_pins[] = {
 	PD11_AOUT_FEC_TX_CLK,
 	PD12_AOUT_FEC_RXD0,
 	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_CLR,
+	PD14_AOUT_FEC_RX_CLK,
 	PD15_AOUT_FEC_COL,
 	PD16_AIN_FEC_TX_ER,
 	PF23_AIN_FEC_TX_EN
@@ -182,12 +189,6 @@ static void gpio_fec_active(void)
 			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }
 
-static void gpio_fec_inactive(void)
-{
-	mxc_gpio_release_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins));
-}
-
 static struct mxc_nand_platform_data pcm038_nand_board_info = {
 	.width = 1,
 	.hw_ecc = 1,
@@ -196,6 +197,7 @@ static struct mxc_nand_platform_data pcm038_nand_board_info = {
 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
 	&mxc_w1_master_device,
+	&mxc_fec_device,
 	&pcm038_sram_mtd_device,
 };
 
@@ -208,6 +210,51 @@ static void __init pcm038_init_sram(void)
 	__raw_writel(0x22220a00, CSCR_A(1));
 }
 
+#ifdef CONFIG_I2C_IMX
+static int mxc_i2c1_pins[] = {
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL
+};
+
+static int pcm038_i2c_1_init(struct device *dev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
+			"I2C1");
+}
+
+static void pcm038_i2c_1_exit(struct device *dev)
+{
+	mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
+}
+
+static struct imxi2c_platform_data pcm038_i2c_1_data = {
+	.bitrate = 100000,
+	.init = pcm038_i2c_1_init,
+	.exit = pcm038_i2c_1_exit,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm038_i2c_devices[] = {
+	[0] = {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	},
+	[1] = {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	},
+	[2] = {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+#endif
+
 static void __init pcm038_init(void)
 {
 	gpio_fec_active();
@@ -217,9 +264,17 @@ static void __init pcm038_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 
-	mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */
+	mxc_gpio_mode(PE16_AF_OWIRE);
 	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
+#ifdef CONFIG_I2C_IMX
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pcm038_i2c_devices,
+				ARRAY_SIZE(pcm038_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+#endif
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -229,11 +284,10 @@ static void __init pcm038_init(void)
 
 static void __init pcm038_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("gpt_clk.0");
+	mx27_clocks_init(26000000);
 }
 
-struct sys_timer pcm038_timer = {
+static struct sys_timer pcm038_timer = {
 	.init = pcm038_timer_init,
 };
 
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index a560cd6ad23..bf4e520bc1b 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,9 +17,138 @@
  */
 
 #include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
 #include <asm/mach/arch.h>
 
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_PORTC + 28);
+}
+
+static int pcm970_sdhc2_pins[] = {
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
+		ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
+	if(ret)
+		return ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+				"imx-mmc-detect", data);
+	if (ret)
+		goto out_release_gpio;
+
+	set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+
+	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
+	if (ret)
+		goto out_release_gpio;
+
+	mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
+	gpio_direction_input(GPIO_PORTC + 28);
+
+	return 0;
+
+out_release_gpio:
+	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+			ARRAY_SIZE(pcm970_sdhc2_pins));
+	return ret;
+}
+
+static void pcm970_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+	gpio_free(GPIO_PORTC + 28);
+	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+			ARRAY_SIZE(pcm970_sdhc2_pins));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = pcm970_sdhc2_get_ro,
+	.init = pcm970_sdhc2_init,
+	.exit = pcm970_sdhc2_exit,
+};
+
+static int mxc_fb_pins[] = {
+	PA5_PF_LSCLK,	PA6_PF_LD0,	PA7_PF_LD1,	PA8_PF_LD2,
+	PA9_PF_LD3,	PA10_PF_LD4,	PA11_PF_LD5,	PA12_PF_LD6,
+	PA13_PF_LD7,	PA14_PF_LD8,	PA15_PF_LD9,	PA16_PF_LD10,
+	PA17_PF_LD11,	PA18_PF_LD12,	PA19_PF_LD13,	PA20_PF_LD14,
+	PA21_PF_LD15,	PA22_PF_LD16,	PA23_PF_LD17,	PA24_PF_REV,
+	PA25_PF_CLS,	PA26_PF_PS,	PA27_PF_SPL_SPR, PA28_PF_HSYNC,
+	PA29_PF_VSYNC,	PA30_PF_CONTRAST, PA31_PF_OE_ACD
+};
+
+static int pcm038_fb_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
+			ARRAY_SIZE(mxc_fb_pins), "FB");
+}
+
+static int pcm038_fb_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
+
+	return 0;
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DH06
+ */
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.pixclock	= 188679, /* in ps (5.3MHz) */
+	.xres		= 240,
+	.yres		= 320,
+
+	.bpp		= 16,
+	.hsync_len	= 7,
+	.left_margin	= 5,
+	.right_margin	= 16,
+
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+	.fixed_screen_cpu = 0,
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock not inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pcr		= 0xFA0080C0,
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.init = pcm038_fb_init,
+	.exit = pcm038_fb_exit,
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -28,4 +157,6 @@
  */
 void __init pcm970_baseboard_init(void)
 {
+	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 }
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 16debc296da..40a485cdc10 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -22,6 +22,7 @@
 #include <linux/serial.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
+#include "devices.h"
 
 static struct resource uart0[] = {
 	{
@@ -99,6 +100,7 @@ struct platform_device mxc_uart_device3 = {
 	.num_resources = ARRAY_SIZE(uart3),
 };
 
+#ifdef CONFIG_MACH_MX27
 static struct resource uart4[] = {
 	{
 		.start = UART5_BASE_ADDR,
@@ -136,3 +138,4 @@ struct platform_device mxc_uart_device5 = {
 	.resource = uart5,
 	.num_resources = ARRAY_SIZE(uart5),
 };
+#endif
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 7b8269719d1..92c79d4bd16 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -46,7 +46,7 @@ void arch_idle(void)
 /*
  * Reset the system. It is called by machine_restart().
  */
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
 {
 	struct clk *clk;
 
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index e79659e8176..d6235583e97 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,21 +1,40 @@
-menu "MX3 Options"
-	depends on ARCH_MX3
+if ARCH_MX3
+
+config ARCH_MX31
+	bool
+
+config ARCH_MX35
+	bool
+
+comment "MX3 platforms:"
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
+	select ARCH_MX31
 	default y
 	help
 	  Include support for MX31ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31ADS_WM1133_EV1
+	bool "Support Wolfson Microelectronics 1133-EV1 module"
+	depends on MACH_MX31ADS
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
+	  and audio module for the MX31ADS platform.
+
 config MACH_PCM037
-	bool "Support Phytec pcm037 platforms"
+	bool "Support Phytec pcm037 (i.MX31) platforms"
+	select ARCH_MX31
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
+	select ARCH_MX31
 	default n
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
@@ -23,6 +42,7 @@ config MACH_MX31LITE
 
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
+	select ARCH_MX31
 	default n
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
@@ -30,10 +50,18 @@ config MACH_MX31_3DS
 
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	select ARCH_MX31
 	default n
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
-endmenu
+config MACH_QONG
+	bool "Support Dave/DENX QongEVB-LITE platform"
+	select ARCH_MX31
+	default n
+	help
+	  Include support for Dave/DENX QongEVB-LITE platform. This includes
+	  specific configurations for the board and its peripherals.
 
+endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 5a151540fe8..272c8a953b3 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,9 +4,13 @@
 
 # Object file lists.
 
-obj-y			:= mm.o clock.o devices.o iomux.o
+obj-y				:= mm.o devices.o
+obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
+obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
+				   mx31moboard-marxbot.o
+obj-$(CONFIG_MACH_QONG)		+= qong.o
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
new file mode 100644
index 00000000000..53a112d4e04
--- /dev/null
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -0,0 +1,487 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+
+#define CCM_CCMR        0x00
+#define CCM_PDR0        0x04
+#define CCM_PDR1        0x08
+#define CCM_PDR2        0x0C
+#define CCM_PDR3        0x10
+#define CCM_PDR4        0x14
+#define CCM_RCSR        0x18
+#define CCM_MPCTL       0x1C
+#define CCM_PPCTL       0x20
+#define CCM_ACMR        0x24
+#define CCM_COSR        0x28
+#define CCM_CGR0        0x2C
+#define CCM_CGR1        0x30
+#define CCM_CGR2        0x34
+#define CCM_CGR3        0x38
+
+#ifdef HAVE_SET_RATE_SUPPORT
+static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
+{
+	u32 min_pre, temp_pre, old_err, err;
+
+	min_pre = (div - 1) / maxpost + 1;
+	old_err = 8;
+
+	for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+		if (div > (temp_pre * maxpost))
+			break;
+
+		if (div < (temp_pre * temp_pre))
+			continue;
+
+		err = div % temp_pre;
+
+		if (err == 0) {
+			*pre = temp_pre;
+			break;
+		}
+
+		err = temp_pre - err;
+
+		if (err < old_err) {
+			old_err = err;
+			*pre = temp_pre;
+		}
+	}
+
+	*post = (div + *pre - 1) / *pre;
+}
+
+/* get the best values for a 3-bit divider combined with a 6-bit divider */
+static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
+{
+	if (div >= 512) {
+		*pre = 8;
+		*post = 64;
+	} else if (div >= 64) {
+		calc_dividers(div, pre, post, 64);
+	} else if (div <= 8) {
+		*pre = div;
+		*post = 1;
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+
+/* get the best values for two cascaded 3-bit dividers */
+static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
+{
+	if (div >= 64) {
+		*pre = *post = 8;
+	} else if (div > 8) {
+		calc_dividers(div, pre, post, 8);
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+#endif
+
+static unsigned long get_rate_mpll(void)
+{
+	ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_ppll(void)
+{
+	ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL);
+
+	return mxc_decode_pll(ppctl, 24000000);
+}
+
+struct arm_ahb_div {
+	unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+	{ .arm = 1, .ahb = 4, .sel = 0},
+	{ .arm = 1, .ahb = 3, .sel = 1},
+	{ .arm = 2, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 1, .sel = 0},
+	{ .arm = 1, .ahb = 5, .sel = 0},
+	{ .arm = 1, .ahb = 8, .sel = 0},
+	{ .arm = 1, .ahb = 6, .sel = 1},
+	{ .arm = 2, .ahb = 4, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static struct arm_ahb_div clk_automotive[] = {
+	{ .arm = 1, .ahb = 3, .sel = 0},
+	{ .arm = 1, .ahb = 2, .sel = 1},
+	{ .arm = 2, .ahb = 1, .sel = 1},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 1, .ahb = 6, .sel = 0},
+	{ .arm = 1, .ahb = 4, .sel = 1},
+	{ .arm = 2, .ahb = 2, .sel = 1},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static unsigned long get_rate_arm(void)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	struct arm_ahb_div *aad;
+	unsigned long fref = get_rate_mpll();
+
+	if (pdr0 & 1) {
+		/* consumer path */
+		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+		if (aad->sel)
+			fref = fref * 2 / 3;
+	} else {
+		/* auto path */
+		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+		if (aad->sel)
+			fref = fref * 3 / 4;
+	}
+	return fref / aad->arm;
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	struct arm_ahb_div *aad;
+	unsigned long fref = get_rate_mpll();
+
+	if (pdr0 & 1)
+		/* consumer path */
+		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+	else
+		/* auto path */
+		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+
+	return fref / aad->ahb;
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_3_3_div(unsigned long in)
+{
+	return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long div = get_3_3_div(pdr4 >> 10);
+
+	if (pdr3 & (1 << 14))
+		return get_rate_arm() / div;
+	else
+		return get_rate_ppll() / div;
+}
+
+static unsigned long get_rate_sdhc(struct clk *clk)
+{
+	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+	unsigned long div, rate;
+
+	if (pdr3 & (1 << 6))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	switch (clk->id) {
+	default:
+	case 0:
+		div = pdr3 & 0x3f;
+		break;
+	case 1:
+		div = (pdr3 >> 8) & 0x3f;
+		break;
+	case 2:
+		div = (pdr3 >> 16) & 0x3f;
+		break;
+	}
+
+	return rate / get_3_3_div(div);
+}
+
+static unsigned long get_rate_mshc(struct clk *clk)
+{
+	unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1);
+	unsigned long div1, div2, rate;
+
+	if (pdr1 & (1 << 7))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	div1 = (pdr1 >> 29) & 0x7;
+	div2 = (pdr1 >> 22) & 0x3f;
+
+	return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_ssi(struct clk *clk)
+{
+	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+	unsigned long div1, div2, rate;
+
+	if (pdr2 & (1 << 6))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	switch (clk->id) {
+	default:
+	case 0:
+		div1 = pdr2 & 0x3f;
+		div2 = (pdr2 >> 24) & 0x7;
+		break;
+	case 1:
+		div1 = (pdr2 >> 8) & 0x3f;
+		div2 = (pdr2 >> 27) & 0x7;
+		break;
+	}
+
+	return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_csi(struct clk *clk)
+{
+	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+	unsigned long rate;
+
+	if (pdr2 & (1 << 7))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+}
+
+static unsigned long get_rate_ipg_per(struct clk *clk)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long div1, div2;
+
+	if (pdr0 & (1 << 26)) {
+		div1 = (pdr4 >> 19) & 0x7;
+		div2 = (pdr4 >> 16) & 0x7;
+		return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+	} else {
+		div1 = (pdr0 >> 12) & 0x7;
+		return get_rate_ahb(NULL) / div1;
+	}
+}
+
+static int clk_cgr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 3 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_cgr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(3 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= CCM_BASE + er,	\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= clk_cgr_enable,	\
+		.disable	= clk_cgr_disable,	\
+	}
+
+DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
+DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL);
+DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
+DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk,  1, CCM_CGR0, 12, get_rate_ipg, NULL);
+DEFINE_CLOCK(ect_clk,    0, CCM_CGR0, 14, get_rate_ipg, NULL);
+DEFINE_CLOCK(edio_clk,   0, CCM_CGR0, 16, NULL, NULL);
+DEFINE_CLOCK(emi_clk,    0, CCM_CGR0, 18, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit1_clk,  0, CCM_CGR0, 20, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(epit2_clk,  1, CCM_CGR0, 22, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(esai_clk,   0, CCM_CGR0, 24, NULL, NULL);
+DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL);
+
+DEFINE_CLOCK(fec_clk,    0, CCM_CGR1,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpio1_clk,  0, CCM_CGR1,  2, NULL, NULL);
+DEFINE_CLOCK(gpio2_clk,  1, CCM_CGR1,  4, NULL, NULL);
+DEFINE_CLOCK(gpio3_clk,  2, CCM_CGR1,  6, NULL, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGR1,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
+DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
+DEFINE_CLOCK(owire_clk,  0, CCM_CGR1, 26, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(pwm_clk,    0, CCM_CGR1, 28, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(rngc_clk,   0, CCM_CGR1, 30, get_rate_ipg, NULL);
+
+DEFINE_CLOCK(rtc_clk,    0, CCM_CGR2,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(rtic_clk,   0, CCM_CGR2,  2, get_rate_ahb, NULL);
+DEFINE_CLOCK(scc_clk,    0, CCM_CGR2,  4, get_rate_ipg, NULL);
+DEFINE_CLOCK(sdma_clk,   0, CCM_CGR2,  6, NULL, NULL);
+DEFINE_CLOCK(spba_clk,   0, CCM_CGR2,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(spdif_clk,  0, CCM_CGR2, 10, NULL, NULL);
+DEFINE_CLOCK(ssi1_clk,   0, CCM_CGR2, 12, get_rate_ssi, NULL);
+DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
+DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
+DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
+
+DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
+DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
+DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
+
+#define _REGISTER_CLOCK(d, n, c)	\
+	{				\
+		.dev_id = d,		\
+		.con_id = n,		\
+		.clk = &c,		\
+	},
+
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+	_REGISTER_CLOCK(NULL, "can", can1_clk)
+	_REGISTER_CLOCK(NULL, "can", can2_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK(NULL, "ect", ect_clk)
+	_REGISTER_CLOCK(NULL, "edio", edio_clk)
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
+	_REGISTER_CLOCK(NULL, "esai", esai_clk)
+	_REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk)
+	_REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk)
+	_REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
+	_REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
+	_REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK(NULL, "rngc", rngc_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
+	_REGISTER_CLOCK(NULL, "spba", spba_clk)
+	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "max", max_clk)
+	_REGISTER_CLOCK(NULL, "admux", admux_clk)
+	_REGISTER_CLOCK(NULL, "csi", csi_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+};
+
+int __init mx35_clocks_init()
+{
+	int i;
+	unsigned int ll = 0;
+
+	mxc_set_cpu_type(MXC_CPU_MX35);
+
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+	ll = (3 << 16);
+#endif
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
+	 */
+	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
+	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
+			CCM_BASE + CCM_CGR1);
+	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
+	__raw_writel(0, CCM_BASE + CCM_CGR3);
+
+	mxc_timer_init(&gpt_clk);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index b1746aae1f8..ca46f4801c3 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,9 +23,13 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
 #include <mach/clock.h>
 #include <mach/hardware.h>
-#include <asm/div64.h>
+#include <mach/common.h>
 
 #include "crm_regs.h"
 
@@ -64,17 +68,17 @@ static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
 }
 
 static struct clk mcu_pll_clk;
-static struct clk mcu_main_clk;
-static struct clk usb_pll_clk;
 static struct clk serial_pll_clk;
 static struct clk ipg_clk;
 static struct clk ckih_clk;
-static struct clk ahb_clk;
 
-static int _clk_enable(struct clk *clk)
+static int cgr_enable(struct clk *clk)
 {
 	u32 reg;
 
+	if (!clk->enable_reg)
+		return 0;
+
 	reg = __raw_readl(clk->enable_reg);
 	reg |= 3 << clk->enable_shift;
 	__raw_writel(reg, clk->enable_reg);
@@ -82,133 +86,69 @@ static int _clk_enable(struct clk *clk)
 	return 0;
 }
 
-static void _clk_disable(struct clk *clk)
+static void cgr_disable(struct clk *clk)
 {
 	u32 reg;
 
+	if (!clk->enable_reg)
+		return;
+
 	reg = __raw_readl(clk->enable_reg);
 	reg &= ~(3 << clk->enable_shift);
+
+	/* special case for EMI clock */
+	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
+		reg |= (1 << clk->enable_shift);
+
 	__raw_writel(reg, clk->enable_reg);
 }
 
-static void _clk_emi_disable(struct clk *clk)
+static unsigned long pll_ref_get_rate(void)
 {
-	u32 reg;
+	unsigned long ccmr;
+	unsigned int prcs;
 
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-	reg |= (1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
+	ccmr = __raw_readl(MXC_CCM_CCMR);
+	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+	if (prcs == 0x1)
+		return CKIL_CLK_FREQ * 1024;
+	else
+		return clk_get_rate(&ckih_clk);
 }
 
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+static unsigned long usb_pll_get_rate(struct clk *clk)
 {
-	u32 reg;
-	signed long pd = 1;	/* Pre-divider */
-	signed long mfi;	/* Multiplication Factor (Integer part) */
-	signed long mfn;	/* Multiplication Factor (Integer part) */
-	signed long mfd;	/* Multiplication Factor (Denominator Part) */
-	signed long tmp;
-	u32 ref_freq = clk_get_rate(clk->parent);
+	unsigned long reg;
 
-	while (((ref_freq / pd) * 10) > rate)
-		pd++;
+	reg = __raw_readl(MXC_CCM_UPCTL);
 
-	if ((ref_freq / pd) < PRE_DIV_MIN_FREQ)
-		return -EINVAL;
+	return mxc_decode_pll(reg, pll_ref_get_rate());
+}
 
-	/* the ref_freq/2 in the following is to round up */
-	mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq;
-	if (mfi < 5 || mfi > 15)
-		return -EINVAL;
+static unsigned long serial_pll_get_rate(struct clk *clk)
+{
+	unsigned long reg;
 
-	/* pick a mfd value that will work
-	 * then solve for mfn */
-	mfd = ref_freq / 50000;
-
-	/*
-	 *          pll_freq * pd * mfd
-	 *   mfn = --------------------  -  (mfi * mfd)
-	 *           2 * ref_freq
-	 */
-	/* the tmp/2 is for rounding */
-	tmp = ref_freq / 10000;
-	mfn =
-	    ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) -
-	    (mfi * mfd);
-
-	mfn = mfn & 0x3ff;
-	pd--;
-	mfd--;
-
-	/* Change the Pll value */
-	reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) |
-	    (mfn << MXC_CCM_PCTL_MFN_OFFSET) |
-	    (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET);
-
-	if (clk == &mcu_pll_clk)
-		__raw_writel(reg, MXC_CCM_MPCTL);
-	else if (clk == &usb_pll_clk)
-		__raw_writel(reg, MXC_CCM_UPCTL);
-	else if (clk == &serial_pll_clk)
-		__raw_writel(reg, MXC_CCM_SRPCTL);
+	reg = __raw_readl(MXC_CCM_SRPCTL);
 
-	return 0;
+	return mxc_decode_pll(reg, pll_ref_get_rate());
 }
 
-static unsigned long _clk_pll_get_rate(struct clk *clk)
+static unsigned long mcu_pll_get_rate(struct clk *clk)
 {
-	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
 	unsigned long reg, ccmr;
-	s64 temp;
-	unsigned int prcs;
 
 	ccmr = __raw_readl(MXC_CCM_CCMR);
-	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
-	if (prcs == 0x1)
-		ref_clk = CKIL_CLK_FREQ * 1024;
-	else
-		ref_clk = clk_get_rate(&ckih_clk);
-
-	if (clk == &mcu_pll_clk) {
-		if ((ccmr & MXC_CCM_CCMR_MPE) == 0)
-			return ref_clk;
-		if ((ccmr & MXC_CCM_CCMR_MDS) != 0)
-			return ref_clk;
-		reg = __raw_readl(MXC_CCM_MPCTL);
-	} else if (clk == &usb_pll_clk)
-		reg = __raw_readl(MXC_CCM_UPCTL);
-	else if (clk == &serial_pll_clk)
-		reg = __raw_readl(MXC_CCM_SRPCTL);
-	else {
-		BUG();
-		return 0;
-	}
-
-	pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET;
-	mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET;
-	mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET;
-	mfi = (mfi <= 5) ? 5 : mfi;
-	mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK;
 
-	if (mfn >= 0x200) {
-		mfn |= 0xFFFFFE00;
-		mfn_abs = -mfn;
-	}
-
-	ref_clk *= 2;
-	ref_clk /= pdf + 1;
+	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
+		return clk_get_rate(&ckih_clk);
 
-	temp = (u64) ref_clk * mfn_abs;
-	do_div(temp, mfd + 1);
-	if (mfn < 0)
-		temp = -temp;
-	temp = (ref_clk * mfi) + temp;
+	reg = __raw_readl(MXC_CCM_MPCTL);
 
-	return temp;
+	return mxc_decode_pll(reg, pll_ref_get_rate());
 }
 
-static int _clk_usb_pll_enable(struct clk *clk)
+static int usb_pll_enable(struct clk *clk)
 {
 	u32 reg;
 
@@ -222,7 +162,7 @@ static int _clk_usb_pll_enable(struct clk *clk)
 	return 0;
 }
 
-static void _clk_usb_pll_disable(struct clk *clk)
+static void usb_pll_disable(struct clk *clk)
 {
 	u32 reg;
 
@@ -231,7 +171,7 @@ static void _clk_usb_pll_disable(struct clk *clk)
 	__raw_writel(reg, MXC_CCM_CCMR);
 }
 
-static int _clk_serial_pll_enable(struct clk *clk)
+static int serial_pll_enable(struct clk *clk)
 {
 	u32 reg;
 
@@ -245,7 +185,7 @@ static int _clk_serial_pll_enable(struct clk *clk)
 	return 0;
 }
 
-static void _clk_serial_pll_disable(struct clk *clk)
+static void serial_pll_disable(struct clk *clk)
 {
 	u32 reg;
 
@@ -258,7 +198,7 @@ static void _clk_serial_pll_disable(struct clk *clk)
 #define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
 #define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
 
-static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
+static unsigned long mcu_main_get_rate(struct clk *clk)
 {
 	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
 
@@ -268,7 +208,7 @@ static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
 		return clk_get_rate(&mcu_pll_clk);
 }
 
-static unsigned long _clk_hclk_get_rate(struct clk *clk)
+static unsigned long ahb_get_rate(struct clk *clk)
 {
 	unsigned long max_pdf;
 
@@ -277,7 +217,7 @@ static unsigned long _clk_hclk_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (max_pdf + 1);
 }
 
-static unsigned long _clk_ipg_get_rate(struct clk *clk)
+static unsigned long ipg_get_rate(struct clk *clk)
 {
 	unsigned long ipg_pdf;
 
@@ -286,7 +226,7 @@ static unsigned long _clk_ipg_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
 }
 
-static unsigned long _clk_nfc_get_rate(struct clk *clk)
+static unsigned long nfc_get_rate(struct clk *clk)
 {
 	unsigned long nfc_pdf;
 
@@ -295,7 +235,7 @@ static unsigned long _clk_nfc_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
 }
 
-static unsigned long _clk_hsp_get_rate(struct clk *clk)
+static unsigned long hsp_get_rate(struct clk *clk)
 {
 	unsigned long hsp_pdf;
 
@@ -304,7 +244,7 @@ static unsigned long _clk_hsp_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
 }
 
-static unsigned long _clk_usb_get_rate(struct clk *clk)
+static unsigned long usb_get_rate(struct clk *clk)
 {
 	unsigned long usb_pdf, usb_prepdf;
 
@@ -315,7 +255,7 @@ static unsigned long _clk_usb_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
 }
 
-static unsigned long _clk_csi_get_rate(struct clk *clk)
+static unsigned long csi_get_rate(struct clk *clk)
 {
 	u32 reg, pre, post;
 
@@ -329,7 +269,7 @@ static unsigned long _clk_csi_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (pre * post);
 }
 
-static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
 {
 	u32 pre, post, parent = clk_get_rate(clk->parent);
 	u32 div = parent / rate;
@@ -342,7 +282,7 @@ static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
 	return parent / (pre * post);
 }
 
-static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
+static int csi_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
 
@@ -363,16 +303,7 @@ static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long _clk_per_get_rate(struct clk *clk)
-{
-	unsigned long per_pdf;
-
-	per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK,
-		       MXC_CCM_PDR0_PER_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (per_pdf + 1);
-}
-
-static unsigned long _clk_ssi1_get_rate(struct clk *clk)
+static unsigned long ssi1_get_rate(struct clk *clk)
 {
 	unsigned long ssi1_pdf, ssi1_prepdf;
 
@@ -383,7 +314,7 @@ static unsigned long _clk_ssi1_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
 }
 
-static unsigned long _clk_ssi2_get_rate(struct clk *clk)
+static unsigned long ssi2_get_rate(struct clk *clk)
 {
 	unsigned long ssi2_pdf, ssi2_prepdf;
 
@@ -394,7 +325,7 @@ static unsigned long _clk_ssi2_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
 }
 
-static unsigned long _clk_firi_get_rate(struct clk *clk)
+static unsigned long firi_get_rate(struct clk *clk)
 {
 	unsigned long firi_pdf, firi_prepdf;
 
@@ -405,7 +336,7 @@ static unsigned long _clk_firi_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
 }
 
-static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
 {
 	u32 pre, post;
 	u32 parent = clk_get_rate(clk->parent);
@@ -420,7 +351,7 @@ static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
 
 }
 
-static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
+static int firi_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
 
@@ -441,12 +372,12 @@ static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long _clk_mbx_get_rate(struct clk *clk)
+static unsigned long mbx_get_rate(struct clk *clk)
 {
 	return clk_get_rate(clk->parent) / 2;
 }
 
-static unsigned long _clk_mstick1_get_rate(struct clk *clk)
+static unsigned long mstick1_get_rate(struct clk *clk)
 {
 	unsigned long msti_pdf;
 
@@ -455,7 +386,7 @@ static unsigned long _clk_mstick1_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (msti_pdf + 1);
 }
 
-static unsigned long _clk_mstick2_get_rate(struct clk *clk)
+static unsigned long mstick2_get_rate(struct clk *clk)
 {
 	unsigned long msti_pdf;
 
@@ -472,661 +403,185 @@ static unsigned long clk_ckih_get_rate(struct clk *clk)
 }
 
 static struct clk ckih_clk = {
-	.name = "ckih",
 	.get_rate = clk_ckih_get_rate,
 };
 
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
-	return CKIL_CLK_FREQ;
-}
-
-static struct clk ckil_clk = {
-	.name = "ckil",
-	.get_rate = clk_ckil_get_rate,
-};
-
 static struct clk mcu_pll_clk = {
-	.name = "mcu_pll",
 	.parent = &ckih_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = _clk_pll_get_rate,
+	.get_rate = mcu_pll_get_rate,
 };
 
 static struct clk mcu_main_clk = {
-	.name = "mcu_main_clk",
 	.parent = &mcu_pll_clk,
-	.get_rate = _clk_mcu_main_get_rate,
+	.get_rate = mcu_main_get_rate,
 };
 
 static struct clk serial_pll_clk = {
-	.name = "serial_pll",
 	.parent = &ckih_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = _clk_pll_get_rate,
-	.enable = _clk_serial_pll_enable,
-	.disable = _clk_serial_pll_disable,
+	.get_rate = serial_pll_get_rate,
+	.enable = serial_pll_enable,
+	.disable = serial_pll_disable,
 };
 
 static struct clk usb_pll_clk = {
-	.name = "usb_pll",
 	.parent = &ckih_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = _clk_pll_get_rate,
-	.enable = _clk_usb_pll_enable,
-	.disable = _clk_usb_pll_disable,
+	.get_rate = usb_pll_get_rate,
+	.enable = usb_pll_enable,
+	.disable = usb_pll_disable,
 };
 
 static struct clk ahb_clk = {
-	.name = "ahb_clk",
 	.parent = &mcu_main_clk,
-	.get_rate = _clk_hclk_get_rate,
-};
-
-static struct clk per_clk = {
-	.name = "per_clk",
-	.parent = &usb_pll_clk,
-	.get_rate = _clk_per_get_rate,
-};
-
-static struct clk perclk_clk = {
-	.name = "perclk_clk",
-	.parent = &ipg_clk,
-};
-
-static struct clk cspi_clk[] = {
-	{
-	 .name = "cspi_clk",
-	 .id = 0,
-	 .parent = &ipg_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR2,
-	 .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "cspi_clk",
-	 .id = 1,
-	 .parent = &ipg_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR2,
-	 .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "cspi_clk",
-	 .id = 2,
-	 .parent = &ipg_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk ipg_clk = {
-	.name = "ipg_clk",
-	.parent = &ahb_clk,
-	.get_rate = _clk_ipg_get_rate,
-};
-
-static struct clk emi_clk = {
-	.name = "emi_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_EMI_OFFSET,
-	.disable = _clk_emi_disable,
-};
-
-static struct clk gpt_clk = {
-	.name = "gpt_clk",
-	.parent = &perclk_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR0_GPT_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk pwm_clk = {
-	.name = "pwm_clk",
-	.parent = &perclk_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR1_PWM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk epit_clk[] = {
-	{
-	 .name = "epit_clk",
-	 .id = 0,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "epit_clk",
-	 .id = 1,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk nfc_clk = {
-	.name = "nfc_clk",
-	.parent = &ahb_clk,
-	.get_rate = _clk_nfc_get_rate,
-};
-
-static struct clk scc_clk = {
-	.name = "scc_clk",
-	.parent = &ipg_clk,
-};
-
-static struct clk ipu_clk = {
-	.name = "ipu_clk",
-	.parent = &mcu_main_clk,
-	.get_rate = _clk_hsp_get_rate,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_IPU_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
-	.name = "kpp_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_KPP_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk wdog_clk = {
-	.name = "wdog_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_WDOG_OFFSET,
-	.disable = _clk_disable,
-};
-static struct clk rtc_clk = {
-	.name = "rtc_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_RTC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk usb_clk[] = {
-	{
-	 .name = "usb_clk",
-	 .parent = &usb_pll_clk,
-	 .get_rate = _clk_usb_get_rate,},
-	{
-	 .name = "usb_ahb_clk",
-	 .parent = &ahb_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk csi_clk = {
-	.name = "csi_clk",
-	.parent = &serial_pll_clk,
-	.get_rate = _clk_csi_get_rate,
-	.round_rate = _clk_csi_round_rate,
-	.set_rate = _clk_csi_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_CSI_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk uart_clk[] = {
-	{
-	 .name = "uart_clk",
-	 .id = 0,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "uart_clk",
-	 .id = 1,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "uart_clk",
-	 .id = 2,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "uart_clk",
-	 .id = 3,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "uart_clk",
-	 .id = 4,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_UART5_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk i2c_clk[] = {
-	{
-	 .name = "i2c_clk",
-	 .id = 0,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "i2c_clk",
-	 .id = 1,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "i2c_clk",
-	 .id = 2,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk owire_clk = {
-	.name = "owire_clk",
-	.parent = &perclk_clk,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
-	.enable = _clk_enable,
-	.disable = _clk_disable,
-};
-
-static struct clk sdhc_clk[] = {
-	{
-	 .name = "sdhc_clk",
-	 .id = 0,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "sdhc_clk",
-	 .id = 1,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk ssi_clk[] = {
-	{
-	 .name = "ssi_clk",
-	 .parent = &serial_pll_clk,
-	 .get_rate = _clk_ssi1_get_rate,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "ssi_clk",
-	 .id = 1,
-	 .parent = &serial_pll_clk,
-	 .get_rate = _clk_ssi2_get_rate,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR2,
-	 .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk firi_clk = {
-	.name = "firi_clk",
-	.parent = &usb_pll_clk,
-	.round_rate = _clk_firi_round_rate,
-	.set_rate = _clk_firi_set_rate,
-	.get_rate = _clk_firi_get_rate,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_FIRI_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk ata_clk = {
-	.name = "ata_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR0_ATA_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mbx_clk = {
-	.name = "mbx_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
-	.get_rate = _clk_mbx_get_rate,
-};
-
-static struct clk vpu_clk = {
-	.name = "vpu_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
-	.get_rate = _clk_mbx_get_rate,
-};
-
-static struct clk rtic_clk = {
-	.name = "rtic_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_RTIC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk rng_clk = {
-	.name = "rng_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR0_RNG_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk sdma_clk[] = {
-	{
-	 .name = "sdma_ahb_clk",
-	 .parent = &ahb_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "sdma_ipg_clk",
-	 .parent = &ipg_clk,}
-};
-
-static struct clk mpeg4_clk = {
-	.name = "mpeg4_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk vl2cc_clk = {
-	.name = "vl2cc_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mstick_clk[] = {
-	{
-	 .name = "mstick_clk",
-	 .id = 0,
-	 .parent = &usb_pll_clk,
-	 .get_rate = _clk_mstick1_get_rate,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "mstick_clk",
-	 .id = 1,
-	 .parent = &usb_pll_clk,
-	 .get_rate = _clk_mstick2_get_rate,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk iim_clk = {
-	.name = "iim_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR0_IIM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 div, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-	if (parent % rate)
-		div++;
-
-	if (div > 8)
-		div = 16;
-	else if (div > 4)
-		div = 8;
-	else if (div > 2)
-		div = 4;
-
-	return parent / div;
-}
-
-static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if (div == 16)
-		div = 4;
-	else if (div == 8)
-		div = 3;
-	else if (div == 4)
-		div = 2;
-	else if (div == 2)
-		div = 1;
-	else if (div == 1)
-		div = 0;
-	else
-		return -EINVAL;
-
-	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK;
-	reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET;
-	__raw_writel(reg, MXC_CCM_COSR);
-
-	return 0;
-}
-
-static unsigned long _clk_cko1_get_rate(struct clk *clk)
-{
-	u32 div;
-
-	div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >>
-	    MXC_CCM_COSR_CLKOUTDIV_OFFSET;
-
-	return clk_get_rate(clk->parent) / (1 << div);
-}
-
-static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK;
-
-	if (parent == &mcu_main_clk)
-		reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &ipg_clk)
-		reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &usb_pll_clk)
-		reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == mcu_main_clk.parent)
-		reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &ahb_clk)
-		reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &serial_pll_clk)
-		reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &ckih_clk)
-		reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &emi_clk)
-		reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &ipu_clk)
-		reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &nfc_clk)
-		reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &uart_clk[0])
-		reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_COSR);
-
-	return 0;
-}
-
-static int _clk_cko1_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN;
-	__raw_writel(reg, MXC_CCM_COSR);
+	.get_rate = ahb_get_rate,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.enable		= cgr_enable,		\
+		.disable	= cgr_disable,		\
+		.secondary	= s,			\
+		.parent		= p,			\
+	}
 
-	return 0;
-}
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
+	static struct clk name = {				\
+		.id		= i,				\
+		.enable_reg	= er,				\
+		.enable_shift	= es,				\
+		.get_rate	= getsetround##_get_rate,	\
+		.set_rate	= getsetround##_set_rate,	\
+		.round_rate	= getsetround##_round_rate,	\
+		.enable		= cgr_enable,			\
+		.disable	= cgr_disable,			\
+		.secondary	= s,				\
+		.parent		= p,				\
+	}
 
-static void _clk_cko1_disable(struct clk *clk)
+DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
+DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
+
+DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
+	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
+	_REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mx3-camera.0", "csi", csi_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK(NULL, "firi", firi_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "rng", rng_clk)
+	_REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
+	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
+	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
+	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+};
+
+int __init mx31_clocks_init(unsigned long fref)
 {
 	u32 reg;
+	int i;
 
-	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN;
-	__raw_writel(reg, MXC_CCM_COSR);
-}
-
-static struct clk cko1_clk = {
-	.name = "cko1_clk",
-	.get_rate = _clk_cko1_get_rate,
-	.set_rate = _clk_cko1_set_rate,
-	.round_rate = _clk_cko1_round_rate,
-	.set_parent = _clk_cko1_set_parent,
-	.enable = _clk_cko1_enable,
-	.disable = _clk_cko1_disable,
-};
-
-static struct clk *mxc_clks[] = {
-	&ckih_clk,
-	&ckil_clk,
-	&mcu_pll_clk,
-	&usb_pll_clk,
-	&serial_pll_clk,
-	&mcu_main_clk,
-	&ahb_clk,
-	&per_clk,
-	&perclk_clk,
-	&cko1_clk,
-	&emi_clk,
-	&cspi_clk[0],
-	&cspi_clk[1],
-	&cspi_clk[2],
-	&ipg_clk,
-	&gpt_clk,
-	&pwm_clk,
-	&wdog_clk,
-	&rtc_clk,
-	&epit_clk[0],
-	&epit_clk[1],
-	&nfc_clk,
-	&ipu_clk,
-	&kpp_clk,
-	&usb_clk[0],
-	&usb_clk[1],
-	&csi_clk,
-	&uart_clk[0],
-	&uart_clk[1],
-	&uart_clk[2],
-	&uart_clk[3],
-	&uart_clk[4],
-	&i2c_clk[0],
-	&i2c_clk[1],
-	&i2c_clk[2],
-	&owire_clk,
-	&sdhc_clk[0],
-	&sdhc_clk[1],
-	&ssi_clk[0],
-	&ssi_clk[1],
-	&firi_clk,
-	&ata_clk,
-	&rtic_clk,
-	&rng_clk,
-	&sdma_clk[0],
-	&sdma_clk[1],
-	&mstick_clk[0],
-	&mstick_clk[1],
-	&scc_clk,
-	&iim_clk,
-};
-
-int __init mxc_clocks_init(unsigned long fref)
-{
-	u32 reg;
-	struct clk **clkp;
+	mxc_set_cpu_type(MXC_CPU_MX31);
 
 	ckih_rate = fref;
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
-
-	if (cpu_is_mx31()) {
-		clk_register(&mpeg4_clk);
-		clk_register(&mbx_clk);
-	} else {
-		clk_register(&vpu_clk);
-		clk_register(&vl2cc_clk);
-	}
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	/* Turn off all possible clocks */
-	__raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0);
+	__raw_writel((3 << 4), MXC_CCM_CGR0);
 	__raw_writel(0, MXC_CCM_CGR1);
-
-	__raw_writel(MXC_CCM_CGR2_EMI_MASK |
-		     MXC_CCM_CGR2_IPMUX1_MASK |
-		     MXC_CCM_CGR2_IPMUX2_MASK |
-		     MXC_CCM_CGR2_MXCCLKENSEL_MASK |	/* for MX32 */
-		     MXC_CCM_CGR2_CHIKCAMPEN_MASK |	/* for MX32 */
-		     MXC_CCM_CGR2_OVRVPUBUSY_MASK |	/* for MX32 */
+	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
 		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
 					   MX32, but still required to be set */
 		     MXC_CCM_CGR2);
 
-	clk_disable(&cko1_clk);
-	clk_disable(&usb_pll_clk);
+	usb_pll_disable(&usb_pll_clk);
 
 	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
 
@@ -1143,6 +598,8 @@ int __init mxc_clocks_init(unsigned long fref)
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
+	mxc_timer_init(&ipg_clk);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index 4a0e0ede23b..adfa3627ad8 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -91,47 +91,6 @@
 #define MXC_CCM_PDR0_MCU_PODF_OFFSET            0
 #define MXC_CCM_PDR0_MCU_PODF_MASK              0x7
 
-#define MXC_CCM_PDR0_HSP_DIV_1                  (0x0 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_2                  (0x1 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_3                  (0x2 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_4                  (0x3 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_5                  (0x4 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_6                  (0x5 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_7                  (0x6 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_8                  (0x7 << 11)
-
-#define MXC_CCM_PDR0_IPG_DIV_1                  (0x0 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_2                  (0x1 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_3                  (0x2 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_4                  (0x3 << 6)
-
-#define MXC_CCM_PDR0_MAX_DIV_1                  (0x0 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_2                  (0x1 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_3                  (0x2 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_4                  (0x3 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_5                  (0x4 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_6                  (0x5 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_7                  (0x6 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_8                  (0x7 << 3)
-
-#define MXC_CCM_PDR0_NFC_DIV_1                  (0x0 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_2                  (0x1 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_3                  (0x2 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_4                  (0x3 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_5                  (0x4 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_6                  (0x5 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_7                  (0x6 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_8                  (0x7 << 8)
-
-#define MXC_CCM_PDR0_MCU_DIV_1                  0x0
-#define MXC_CCM_PDR0_MCU_DIV_2                  0x1
-#define MXC_CCM_PDR0_MCU_DIV_3                  0x2
-#define MXC_CCM_PDR0_MCU_DIV_4                  0x3
-#define MXC_CCM_PDR0_MCU_DIV_5                  0x4
-#define MXC_CCM_PDR0_MCU_DIV_6                  0x5
-#define MXC_CCM_PDR0_MCU_DIV_7                  0x6
-#define MXC_CCM_PDR0_MCU_DIV_8                  0x7
-
 #define MXC_CCM_PDR1_USB_PRDF_OFFSET            30
 #define MXC_CCM_PDR1_USB_PRDF_MASK              (0x3 << 30)
 #define MXC_CCM_PDR1_USB_PODF_OFFSET            27
@@ -152,118 +111,6 @@
 /* Bit definitions for RCSR */
 #define MXC_CCM_RCSR_NF16B			0x80000000
 
-/* Bit definitions for both MCU, USB and SR PLL control registers */
-#define MXC_CCM_PCTL_BRM                        0x80000000
-#define MXC_CCM_PCTL_PD_OFFSET                  26
-#define MXC_CCM_PCTL_PD_MASK                    (0xF << 26)
-#define MXC_CCM_PCTL_MFD_OFFSET                 16
-#define MXC_CCM_PCTL_MFD_MASK                   (0x3FF << 16)
-#define MXC_CCM_PCTL_MFI_OFFSET                 10
-#define MXC_CCM_PCTL_MFI_MASK                   (0xF << 10)
-#define MXC_CCM_PCTL_MFN_OFFSET                 0
-#define MXC_CCM_PCTL_MFN_MASK                   0x3FF
-
-#define MXC_CCM_CGR0_SD_MMC1_OFFSET             0
-#define MXC_CCM_CGR0_SD_MMC1_MASK               (0x3 << 0)
-#define MXC_CCM_CGR0_SD_MMC2_OFFSET             2
-#define MXC_CCM_CGR0_SD_MMC2_MASK               (0x3 << 2)
-#define MXC_CCM_CGR0_GPT_OFFSET                 4
-#define MXC_CCM_CGR0_GPT_MASK                   (0x3 << 4)
-#define MXC_CCM_CGR0_EPIT1_OFFSET               6
-#define MXC_CCM_CGR0_EPIT1_MASK                 (0x3 << 6)
-#define MXC_CCM_CGR0_EPIT2_OFFSET               8
-#define MXC_CCM_CGR0_EPIT2_MASK                 (0x3 << 8)
-#define MXC_CCM_CGR0_IIM_OFFSET                 10
-#define MXC_CCM_CGR0_IIM_MASK                   (0x3 << 10)
-#define MXC_CCM_CGR0_ATA_OFFSET                 12
-#define MXC_CCM_CGR0_ATA_MASK                   (0x3 << 12)
-#define MXC_CCM_CGR0_SDMA_OFFSET                14
-#define MXC_CCM_CGR0_SDMA_MASK                  (0x3 << 14)
-#define MXC_CCM_CGR0_CSPI3_OFFSET               16
-#define MXC_CCM_CGR0_CSPI3_MASK                 (0x3 << 16)
-#define MXC_CCM_CGR0_RNG_OFFSET                 18
-#define MXC_CCM_CGR0_RNG_MASK                   (0x3 << 18)
-#define MXC_CCM_CGR0_UART1_OFFSET               20
-#define MXC_CCM_CGR0_UART1_MASK                 (0x3 << 20)
-#define MXC_CCM_CGR0_UART2_OFFSET               22
-#define MXC_CCM_CGR0_UART2_MASK                 (0x3 << 22)
-#define MXC_CCM_CGR0_SSI1_OFFSET                24
-#define MXC_CCM_CGR0_SSI1_MASK                  (0x3 << 24)
-#define MXC_CCM_CGR0_I2C1_OFFSET                26
-#define MXC_CCM_CGR0_I2C1_MASK                  (0x3 << 26)
-#define MXC_CCM_CGR0_I2C2_OFFSET                28
-#define MXC_CCM_CGR0_I2C2_MASK                  (0x3 << 28)
-#define MXC_CCM_CGR0_I2C3_OFFSET                30
-#define MXC_CCM_CGR0_I2C3_MASK                  (0x3 << 30)
-
-#define MXC_CCM_CGR1_HANTRO_OFFSET              0
-#define MXC_CCM_CGR1_HANTRO_MASK                (0x3 << 0)
-#define MXC_CCM_CGR1_MEMSTICK1_OFFSET           2
-#define MXC_CCM_CGR1_MEMSTICK1_MASK             (0x3 << 2)
-#define MXC_CCM_CGR1_MEMSTICK2_OFFSET           4
-#define MXC_CCM_CGR1_MEMSTICK2_MASK             (0x3 << 4)
-#define MXC_CCM_CGR1_CSI_OFFSET                 6
-#define MXC_CCM_CGR1_CSI_MASK                   (0x3 << 6)
-#define MXC_CCM_CGR1_RTC_OFFSET                 8
-#define MXC_CCM_CGR1_RTC_MASK                   (0x3 << 8)
-#define MXC_CCM_CGR1_WDOG_OFFSET                10
-#define MXC_CCM_CGR1_WDOG_MASK                  (0x3 << 10)
-#define MXC_CCM_CGR1_PWM_OFFSET                 12
-#define MXC_CCM_CGR1_PWM_MASK                   (0x3 << 12)
-#define MXC_CCM_CGR1_SIM_OFFSET                 14
-#define MXC_CCM_CGR1_SIM_MASK                   (0x3 << 14)
-#define MXC_CCM_CGR1_ECT_OFFSET                 16
-#define MXC_CCM_CGR1_ECT_MASK                   (0x3 << 16)
-#define MXC_CCM_CGR1_USBOTG_OFFSET              18
-#define MXC_CCM_CGR1_USBOTG_MASK                (0x3 << 18)
-#define MXC_CCM_CGR1_KPP_OFFSET                 20
-#define MXC_CCM_CGR1_KPP_MASK                   (0x3 << 20)
-#define MXC_CCM_CGR1_IPU_OFFSET                 22
-#define MXC_CCM_CGR1_IPU_MASK                   (0x3 << 22)
-#define MXC_CCM_CGR1_UART3_OFFSET               24
-#define MXC_CCM_CGR1_UART3_MASK                 (0x3 << 24)
-#define MXC_CCM_CGR1_UART4_OFFSET               26
-#define MXC_CCM_CGR1_UART4_MASK                 (0x3 << 26)
-#define MXC_CCM_CGR1_UART5_OFFSET               28
-#define MXC_CCM_CGR1_UART5_MASK                 (0x3 << 28)
-#define MXC_CCM_CGR1_OWIRE_OFFSET               30
-#define MXC_CCM_CGR1_OWIRE_MASK                 (0x3 << 30)
-
-#define MXC_CCM_CGR2_SSI2_OFFSET                0
-#define MXC_CCM_CGR2_SSI2_MASK                  (0x3 << 0)
-#define MXC_CCM_CGR2_CSPI1_OFFSET               2
-#define MXC_CCM_CGR2_CSPI1_MASK                 (0x3 << 2)
-#define MXC_CCM_CGR2_CSPI2_OFFSET               4
-#define MXC_CCM_CGR2_CSPI2_MASK                 (0x3 << 4)
-#define MXC_CCM_CGR2_GACC_OFFSET                6
-#define MXC_CCM_CGR2_GACC_MASK                  (0x3 << 6)
-#define MXC_CCM_CGR2_EMI_OFFSET                 8
-#define MXC_CCM_CGR2_EMI_MASK                   (0x3 << 8)
-#define MXC_CCM_CGR2_RTIC_OFFSET                10
-#define MXC_CCM_CGR2_RTIC_MASK                  (0x3 << 10)
-#define MXC_CCM_CGR2_FIRI_OFFSET                12
-#define MXC_CCM_CGR2_FIRI_MASK                  (0x3 << 12)
-#define MXC_CCM_CGR2_IPMUX1_OFFSET              14
-#define MXC_CCM_CGR2_IPMUX1_MASK                (0x3 << 14)
-#define MXC_CCM_CGR2_IPMUX2_OFFSET              16
-#define MXC_CCM_CGR2_IPMUX2_MASK                (0x3 << 16)
-
-/* These new CGR2 bits are added in MX32 */
-#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET	18
-#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK		(0x3 << 18)
-#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET	20
-#define MXC_CCM_CGR2_APMSSICLKSEL_MASK		(0x3 << 20)
-#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET	22
-#define MXC_CCM_CGR2_APMPERCLKSEL_MASK		(0x3 << 22)
-#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET		24
-#define MXC_CCM_CGR2_MXCCLKENSEL_MASK		(0x1 << 24)
-#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET		25
-#define MXC_CCM_CGR2_CHIKCAMPEN_MASK		(0x1 << 25)
-#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET		26
-#define MXC_CCM_CGR2_OVRVPUBUSY_MASK		(0x1 << 26)
-#define MXC_CCM_CGR2_APMENA_OFFSET		30
-#define MXC_CCM_CGR2_AOMENA_MASK		(0x1 << 30)
-
 /*
  * LTR0 register offsets
  */
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index f8428800f28..380be0c9b21 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,6 +25,8 @@
 #include <mach/irqs.h>
 #include <mach/imx-uart.h>
 
+#include "devices.h"
+
 static struct resource uart0[] = {
 	{
 		.start = UART1_BASE_ADDR,
@@ -82,6 +84,7 @@ struct platform_device mxc_uart_device2 = {
 	.num_resources = ARRAY_SIZE(uart2),
 };
 
+#ifdef CONFIG_ARCH_MX31
 static struct resource uart3[] = {
 	{
 		.start = UART4_BASE_ADDR,
@@ -119,6 +122,7 @@ struct platform_device mxc_uart_device4 = {
 	.resource = uart4,
 	.num_resources = ARRAY_SIZE(uart4),
 };
+#endif /* CONFIG_ARCH_MX31 */
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
@@ -164,8 +168,8 @@ struct platform_device mxc_w1_master_device = {
 
 static struct resource mxc_nand_resources[] = {
 	{
-		.start	= NFC_BASE_ADDR,
-		.end	= NFC_BASE_ADDR + 0xfff,
+		.start	= 0, /* runtime dependent */
+		.end	= 0,
 		.flags	= IORESOURCE_MEM
 	}, {
 		.start	= MXC_INT_NANDFC,
@@ -180,3 +184,188 @@ struct platform_device mxc_nand_device = {
 	.num_resources = ARRAY_SIZE(mxc_nand_resources),
 	.resource = mxc_nand_resources,
 };
+
+static struct resource mxc_i2c0_resources[] = {
+	{
+		.start = I2C_BASE_ADDR,
+		.end = I2C_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MXC_INT_I2C,
+		.end = MXC_INT_I2C,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
+	.resource = mxc_i2c0_resources,
+};
+
+static struct resource mxc_i2c1_resources[] = {
+	{
+		.start = I2C2_BASE_ADDR,
+		.end = I2C2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MXC_INT_I2C2,
+		.end = MXC_INT_I2C2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
+	.resource = mxc_i2c1_resources,
+};
+
+static struct resource mxc_i2c2_resources[] = {
+	{
+		.start = I2C3_BASE_ADDR,
+		.end = I2C3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MXC_INT_I2C3,
+		.end = MXC_INT_I2C3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device2 = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_i2c2_resources),
+	.resource = mxc_i2c2_resources,
+};
+
+#ifdef CONFIG_ARCH_MX31
+static struct resource mxcsdhc0_resources[] = {
+	{
+		.start = MMC_SDHC1_BASE_ADDR,
+		.end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_MMC_SDHC1,
+		.end = MXC_INT_MMC_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxcsdhc1_resources[] = {
+	{
+		.start = MMC_SDHC2_BASE_ADDR,
+		.end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_MMC_SDHC2,
+		.end = MXC_INT_MMC_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxcsdhc_device0 = {
+	.name = "mxc-mmc",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxcsdhc0_resources),
+	.resource = mxcsdhc0_resources,
+};
+
+struct platform_device mxcsdhc_device1 = {
+	.name = "mxc-mmc",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
+	.resource = mxcsdhc1_resources,
+};
+#endif /* CONFIG_ARCH_MX31 */
+
+/* i.MX31 Image Processing Unit */
+
+/* The resource order is important! */
+static struct resource mx3_ipu_rsrc[] = {
+	{
+		.start = IPU_CTRL_BASE_ADDR,
+		.end = IPU_CTRL_BASE_ADDR + 0x5F,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IPU_CTRL_BASE_ADDR + 0x88,
+		.end = IPU_CTRL_BASE_ADDR + 0xB3,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_IPU_SYN,
+		.end = MXC_INT_IPU_SYN,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC_INT_IPU_ERR,
+		.end = MXC_INT_IPU_ERR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx3_ipu = {
+	.name = "ipu-core",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(mx3_ipu_rsrc),
+	.resource = mx3_ipu_rsrc,
+};
+
+static struct resource fb_resources[] = {
+	{
+		.start	= IPU_CTRL_BASE_ADDR + 0xB4,
+		.end	= IPU_CTRL_BASE_ADDR + 0x1BF,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mx3_fb = {
+	.name		= "mx3_sdc_fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(fb_resources),
+	.resource	= fb_resources,
+	.dev		= {
+		.coherent_dma_mask = 0xffffffff,
+       },
+};
+
+#ifdef CONFIG_ARCH_MX35
+static struct resource mxc_fec_resources[] = {
+	{
+		.start	= MXC_FEC_BASE_ADDR,
+		.end	= MXC_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC_INT_FEC,
+		.end	= MXC_INT_FEC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_fec_device = {
+	.name = "fec",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fec_resources),
+	.resource = mxc_fec_resources,
+};
+#endif
+
+static int mx3_devices_init(void)
+{
+	if (cpu_is_mx31()) {
+		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
+		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+	}
+	if (cpu_is_mx35()) {
+		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
+		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+	}
+
+	return 0;
+}
+
+subsys_initcall(mx3_devices_init);
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 9949ef4e069..88c04b296fa 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -6,3 +6,11 @@ extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mxc_nand_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx3_ipu;
+extern struct platform_device mx3_fb;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxcsdhc_device0;
+extern struct platform_device mxcsdhc_device1;
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 7a5088b519a..40ffc5a664d 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -1,6 +1,7 @@
 /*
  * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -21,6 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/kernel.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <mach/iomux-mx3.h>
@@ -38,6 +40,8 @@
 static DEFINE_SPINLOCK(gpio_mux_lock);
 
 #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
 /*
  * set the mode for a IOMUX pin.
  */
@@ -50,9 +54,6 @@ int mxc_iomux_mode(unsigned int pin_mode)
 	field = pin_mode & 0x3;
 	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
 
-	pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n",
-			__func__, (pin_mode & IOMUX_REG_MASK), field, mode);
-
 	spin_lock(&gpio_mux_lock);
 
 	l = __raw_readl(reg);
@@ -93,6 +94,86 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 EXPORT_SYMBOL(mxc_iomux_set_pad);
 
 /*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
+ */
+int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+	unsigned gpio;
+
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+	mxc_iomux_mode(pin);
+
+	/* if we have a gpio, we can allocate it */
+	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
+	if (gpio < (GPIO_PORT_MAX + 1) * 32)
+		if (gpio_request(gpio, label))
+			return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		if (mxc_iomux_setup_pin(*p, label))
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+	unsigned gpio;
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+
+	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
+	if (gpio < (GPIO_PORT_MAX + 1) * 32)
+		gpio_free(gpio);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+	unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
+/*
  * This function enables/disables the general purpose function for a particular
  * signal.
  */
@@ -111,4 +192,3 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
 	spin_unlock(&gpio_mux_lock);
 }
 EXPORT_SYMBOL(mxc_iomux_set_gpr);
-
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 0589b5cd33c..9e1459cb4b7 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,14 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <mach/hardware.h>
+#include <linux/err.h>
+
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
 #include <mach/common.h>
+#include <mach/hardware.h>
 
 /*!
  * @file mm.c
@@ -50,6 +54,16 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AVIC_BASE_ADDR),
 		.length		= AVIC_SIZE,
 		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length		= AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length		= AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
 	},
 };
 
@@ -62,3 +76,24 @@ void __init mxc_map_io(void)
 {
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+
+#ifdef CONFIG_CACHE_L2X0
+static int mxc_init_l2x0(void)
+{
+	void __iomem *l2x0_base;
+
+	l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
+	if (IS_ERR(l2x0_base)) {
+		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+				PTR_ERR(l2x0_base));
+		return 0;
+	}
+
+	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+	return 0;
+}
+
+arch_initcall(mxc_init_l2x0);
+#endif
+
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index f902a7c37c3..83e5e8e1276 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -22,6 +22,8 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
@@ -35,6 +37,12 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
 #include "devices.h"
 
 /*!
@@ -94,13 +102,16 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
 static inline void mxc_init_imx_uart(void)
 {
-	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 }
 #else /* !SERIAL_IMX */
@@ -176,7 +187,7 @@ static void __init mx31ads_init_expio(void)
 	/*
 	 * Configure INT line as GPIO input
 	 */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
+	mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
 	/* disable the interrupt and clear the status */
 	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -191,26 +202,301 @@ static void __init mx31ads_init_expio(void)
 	set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
 }
 
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+/* This section defines setup for the Wolfson Microelectronics
+ * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
+ * regulator definitions may be shared with them, but for now they can
+ * only be used with this board so would generate warnings about
+ * unused statics and some of the configuration is specific to this
+ * module.
+ */
+
+/* CPU */
+static struct regulator_consumer_supply sw1a_consumers[] = {
+	{
+		.supply = "cpu_vcc",
+	}
+};
+
+static struct regulator_init_data sw1a_data = {
+	.constraints = {
+		.name = "SW1A",
+		.min_uV = 1275000,
+		.max_uV = 1600000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_MODE,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+				    REGULATOR_MODE_FAST,
+		.state_mem = {
+			 .uV = 1400000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
+	.consumer_supplies = sw1a_consumers,
+};
+
+/* System IO - High */
+static struct regulator_init_data viohi_data = {
+	.constraints = {
+		.name = "VIOHO",
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.state_mem = {
+			 .uV = 2800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* System IO - Low */
+static struct regulator_init_data violo_data = {
+	.constraints = {
+		.name = "VIOLO",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* DDR RAM */
+static struct regulator_init_data sw2a_data = {
+	.constraints = {
+		.name = "SW2A",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.state_disk = {
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 0,
+		 },
+		.always_on = 1,
+		.boot_on = 1,
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+static struct regulator_init_data ldo1_data = {
+	.constraints = {
+		.name = "VCAM/VMMC1/VMMC2",
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+	},
+};
+
+static struct regulator_consumer_supply ldo2_consumers[] = {
+	{
+		.supply = "AVDD",
+	},
+	{
+		.supply = "HPVDD",
+	},
+};
+
+/* CODEC and SIM */
+static struct regulator_init_data ldo2_data = {
+	.constraints = {
+		.name = "VESIM/VSIM/AVDD",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+	.consumer_supplies = ldo2_consumers,
+};
+
+/* General */
+static struct regulator_init_data vdig_data = {
+	.constraints = {
+		.name = "VDIG",
+		.min_uV = 1500000,
+		.max_uV = 1500000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* Tranceivers */
+static struct regulator_init_data ldo4_data = {
+	.constraints = {
+		.name = "VRF1/CVDD_2.775",
+		.min_uV = 2500000,
+		.max_uV = 2500000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+static struct wm8350_led_platform_data wm8350_led_data = {
+	.name            = "wm8350:white",
+	.default_trigger = "heartbeat",
+	.max_uA          = 27899,
+};
+
+static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
+	.vmid_discharge_msecs = 1000,
+	.drain_msecs = 30,
+	.cap_discharge_msecs = 700,
+	.vmid_charge_msecs = 700,
+	.vmid_s_curve = WM8350_S_CURVE_SLOW,
+	.dis_out4 = WM8350_DISCHARGE_SLOW,
+	.dis_out3 = WM8350_DISCHARGE_SLOW,
+	.dis_out2 = WM8350_DISCHARGE_SLOW,
+	.dis_out1 = WM8350_DISCHARGE_SLOW,
+	.vroi_out4 = WM8350_TIE_OFF_500R,
+	.vroi_out3 = WM8350_TIE_OFF_500R,
+	.vroi_out2 = WM8350_TIE_OFF_500R,
+	.vroi_out1 = WM8350_TIE_OFF_500R,
+	.vroi_enable = 0,
+	.codec_current_on = WM8350_CODEC_ISEL_1_0,
+	.codec_current_standby = WM8350_CODEC_ISEL_0_5,
+	.codec_current_charge = WM8350_CODEC_ISEL_1_5,
+};
+
+static int mx31_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_ON);
+
+	wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_ON);
+
+	wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	/* Fix up for our own supplies. */
+	for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
+		ldo2_consumers[i].dev = wm8350->dev;
+
+	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
+
+	/* LEDs */
+	wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
+			     WM8350_DC5_ERRACT_SHUTDOWN_CONV);
+	wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
+			       WM8350_ISINK_FLASH_DISABLE,
+			       WM8350_ISINK_FLASH_TRIG_BIT,
+			       WM8350_ISINK_FLASH_DUR_32MS,
+			       WM8350_ISINK_FLASH_ON_INSTANT,
+			       WM8350_ISINK_FLASH_OFF_INSTANT,
+			       WM8350_ISINK_FLASH_MODE_EN);
+	wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
+			       WM8350_ISINK_MODE_BOOST,
+			       WM8350_ISINK_ILIM_NORMAL,
+			       WM8350_DC5_RMP_20V,
+			       WM8350_DC5_FBSRC_ISINKA);
+	wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
+			    &wm8350_led_data);
+
+	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
+	.init = mx31_wm8350_init,
+};
+#endif
+
+#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
+static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+	{
+		I2C_BOARD_INFO("wm8350", 0x1a),
+		.platform_data = &mx31_wm8350_pdata,
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+	},
+#endif
+};
+
+static void mxc_init_i2c(void)
+{
+	i2c_register_board_info(1, mx31ads_i2c1_devices,
+				ARRAY_SIZE(mx31ads_i2c1_devices));
+
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
+
+	mxc_register_device(&mxc_i2c_device1, NULL);
+}
+#else
+static void mxc_init_i2c(void)
+{
+}
+#endif
+
 /*!
  * This structure defines static mappings for the i.MX31ADS board.
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
 		.virtual	= SPBA0_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
 		.length		= SPBA0_SIZE,
 		.type		= MT_DEVICE_NONSHARED
 	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
 		.length		= CS4_SIZE / 2,
@@ -221,13 +507,13 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
 /*!
  * Set up static virtual mappings.
  */
-void __init mx31ads_map_io(void)
+static void __init mx31ads_map_io(void)
 {
 	mxc_map_io();
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
-void __init mx31ads_init_irq(void)
+static void __init mx31ads_init_irq(void)
 {
 	mxc_init_irq();
 	mx31ads_init_expio();
@@ -240,15 +526,15 @@ static void __init mxc_board_init(void)
 {
 	mxc_init_extuart();
 	mxc_init_imx_uart();
+	mxc_init_i2c();
 }
 
 static void __init mx31ads_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
-struct sys_timer mx31ads_timer = {
+static struct sys_timer mx31ads_timer = {
 	.init	= mx31ads_timer_init,
 };
 
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index c4344007014..894d98cd994 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -42,21 +42,11 @@
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = AIPS1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length = AIPS1_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
 		.virtual = SPBA0_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
 		.length = SPBA0_SIZE,
 		.type = MT_DEVICE_NONSHARED
 	}, {
-		.virtual = AIPS2_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length = AIPS2_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
 		.length = CS4_SIZE,
@@ -82,8 +72,7 @@ static void __init mxc_board_init(void)
 
 static void __init mx31lite_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 struct sys_timer mx31lite_timer = {
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
new file mode 100644
index 00000000000..d080b4add79
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mxc_uart1_pins[] = {
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+};
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_devboard_init(void)
+{
+	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
+	mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
new file mode 100644
index 00000000000..9ef9566823f
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_marxbot_init(void)
+{
+	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index c29098af739..34c2a1b99d4 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -32,6 +32,7 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/board-mx31moboard.h>
 
 #include "devices.h"
 
@@ -63,6 +64,18 @@ static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
 
+static int mxc_uart0_pins[] = {
+	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+};
+static int mxc_uart4_pins[] = {
+	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+};
+
+static int mx31moboard_baseboard;
+core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
+
 /*
  * Board specific initialization.
  */
@@ -70,58 +83,29 @@ static void __init mxc_board_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+	mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
-	mxc_iomux_mode(MX31_PIN_CTS2__CTS2);
-	mxc_iomux_mode(MX31_PIN_RTS2__RTS2);
-	mxc_iomux_mode(MX31_PIN_TXD2__TXD2);
-	mxc_iomux_mode(MX31_PIN_RXD2__RXD2);
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
-	mxc_iomux_mode(MX31_PIN_PC_RST__CTS5);
-	mxc_iomux_mode(MX31_PIN_PC_VS2__RTS5);
-	mxc_iomux_mode(MX31_PIN_PC_BVD2__TXD5);
-	mxc_iomux_mode(MX31_PIN_PC_BVD1__RXD5);
-
+	mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
-}
 
-/*
- * This structure defines static mappings for the mx31moboard.
- */
-static struct map_desc mx31moboard_io_desc[] __initdata = {
-	{
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init mx31moboard_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(mx31moboard_io_desc, ARRAY_SIZE(mx31moboard_io_desc));
+	switch (mx31moboard_baseboard) {
+	case MX31NOBOARD:
+		break;
+	case MX31DEVBOARD:
+		mx31moboard_devboard_init();
+		break;
+	case MX31MARXBOT:
+		mx31moboard_marxbot_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+	}
 }
 
 static void __init mx31moboard_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 struct sys_timer mx31moboard_timer = {
@@ -133,7 +117,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31moboard_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index d464d068a4a..bc63f178569 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -45,40 +45,17 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static inline void mxc_init_imx_uart(void)
-{
-	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-}
-
-/*!
- * This structure defines static mappings for the i.MX31PDK board.
- */
-static struct map_desc mx31pdk_io_desc[] __initdata = {
-	{
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
+static int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
 };
 
-/*!
- * Set up static virtual mappings.
- */
-static void __init mx31pdk_map_io(void)
+static inline void mxc_init_imx_uart(void)
 {
-	mxc_map_io();
-	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 }
 
 /*!
@@ -91,8 +68,7 @@ static void __init mxc_board_init(void)
 
 static void __init mx31pdk_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 static struct sys_timer mx31pdk_timer = {
@@ -108,7 +84,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31pdk_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 8cea8258722..5fce022114d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -26,6 +26,8 @@
 #include <linux/gpio.h>
 #include <linux/smc911x.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -37,6 +39,10 @@
 #include <mach/iomux-mx3.h>
 #include <mach/board-pcm037.h>
 #include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
 
 #include "devices.h"
 
@@ -117,12 +123,90 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
+#ifdef CONFIG_I2C_IMX
+static int i2c_1_pins[] = {
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+};
+
+static int pcm037_i2c_1_init(struct device *dev)
+{
+	return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
+			"i2c-1");
+}
+
+static void pcm037_i2c_1_exit(struct device *dev)
+{
+	mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
+}
+
+static struct imxi2c_platform_data pcm037_i2c_1_data = {
+	.bitrate = 100000,
+	.init = pcm037_i2c_1_init,
+	.exit = pcm037_i2c_1_exit,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm037_i2c_devices[] = {
+       {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563",
+	}
+};
+#endif
+
+static int sdhc1_pins[] = {
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+};
+
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+{
+	return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
+				"sdhc-1");
+}
+
+static void pcm970_sdhc1_exit(struct device *dev, void *data)
+{
+	mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+}
+
+/* No card and rw detection at the moment */
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pcm970_sdhc1_init,
+	.exit = pcm970_sdhc1_exit,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_eth,
 	&pcm037_sram_device,
 };
 
+static int uart0_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
+static int uart2_pins[] = {
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3
+};
+
 /*
  * Board specific initialization.
  */
@@ -130,59 +214,33 @@ static void __init mxc_board_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+	mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
-	mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
-	mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
-
+	mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
 	mxc_register_device(&mxc_uart_device2, &uart_pdata);
 
-	mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
+	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
 	/* SMSC9215 IRQ pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+				"pcm037-eth"))
 		gpio_direction_input(MX31_PIN_GPIO3_1);
 
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
-}
+#ifdef CONFIG_I2C_IMX
+	i2c_register_board_info(1, pcm037_i2c_devices,
+			ARRAY_SIZE(pcm037_i2c_devices));
 
-/*
- * This structure defines static mappings for the pcm037 board.
- */
-static struct map_desc pcm037_io_desc[] __initdata = {
-	{
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init pcm037_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc));
+	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
+#endif
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 }
 
 static void __init pcm037_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 struct sys_timer pcm037_timer = {
@@ -194,7 +252,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = pcm037_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
new file mode 100644
index 00000000000..6c4283cec6f
--- /dev/null
+++ b/arch/arm/mach-mx3/qong.c
@@ -0,0 +1,312 @@
+/*
+ *  Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <mach/board-qong.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/* FPGA defines */
+#define QONG_FPGA_VERSION(major, minor, rev)	\
+	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
+
+#define QONG_FPGA_BASEADDR 		CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
+
+#define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
+#define QONG_FPGA_CTRL_SIZE 		0x10
+/* FPGA control registers */
+#define QONG_FPGA_CTRL_VERSION		0x00
+
+#define QONG_DNET_ID		1
+#define QONG_DNET_BASEADDR	\
+	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
+#define QONG_DNET_SIZE 		0x00001000
+
+#define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
+			"uart-0");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static struct resource dnet_resources[] = {
+	[0] = {
+		.name	= "dnet-memory",
+		.start	= QONG_DNET_BASEADDR,
+		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= QONG_FPGA_IRQ,
+		.end	= QONG_FPGA_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dnet_device = {
+	.name			= "dnet",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(dnet_resources),
+	.resource		= dnet_resources,
+};
+
+static int __init qong_init_dnet(void)
+{
+	int ret;
+
+	ret = platform_device_register(&dnet_device);
+	return ret;
+}
+
+/* MTD NOR flash */
+
+static struct physmap_flash_data qong_flash_data = {
+	.width = 2,
+};
+
+static struct resource qong_flash_resource = {
+	.start = CS0_BASE_ADDR,
+	.end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &qong_flash_data,
+		},
+	.resource = &qong_flash_resource,
+	.num_resources = 1,
+};
+
+static void qong_init_nor_mtd(void)
+{
+	(void)platform_device_register(&qong_nor_mtd_device);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
+	else
+		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int qong_nand_device_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+}
+
+static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip >= 0)
+		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+	else
+		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
+}
+
+static struct platform_nand_data qong_nand_data = {
+	.chip = {
+		.chip_delay		= 20,
+		.options		= 0,
+	},
+	.ctrl = {
+		.cmd_ctrl 		= qong_nand_cmd_ctrl,
+		.dev_ready		= qong_nand_device_ready,
+		.select_chip		= qong_nand_select_chip,
+	}
+};
+
+static struct resource qong_nand_resource = {
+	.start  	= CS3_BASE_ADDR,
+	.end    	= CS3_BASE_ADDR + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nand_device = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &qong_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &qong_nand_resource,
+};
+
+static void __init qong_init_nand_mtd(void)
+{
+	/* init CS */
+	__raw_writel(0x00004f00, CSCR_U(3));
+	__raw_writel(0x20013b31, CSCR_L(3));
+	__raw_writel(0x00020800, CSCR_A(3));
+	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
+
+	/* enable pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+
+	/* ready/busy pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+
+	/* write protect pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
+
+	platform_device_register(&qong_nand_device);
+}
+
+static void __init qong_init_fpga(void)
+{
+	void __iomem *regs;
+	u32 fpga_ver;
+
+	regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to map registers, aborting.\n",
+				__func__);
+		return;
+	}
+
+	fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
+	iounmap(regs);
+	printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
+			(fpga_ver & 0xF000) >> 12,
+			(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
+	if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
+		printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
+				"devices won't be registered!\n");
+		return;
+	}
+
+	/* register FPGA-based devices */
+	qong_init_nand_mtd();
+	qong_init_dnet();
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc qong_io_desc[] __initdata = {
+	{
+		.virtual = AIPS1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length = AIPS1_SIZE,
+		.type = MT_DEVICE_NONSHARED
+	}, {
+		.virtual = AIPS2_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length = AIPS2_SIZE,
+		.type = MT_DEVICE_NONSHARED
+	}
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init qong_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_init_imx_uart();
+	qong_init_nor_mtd();
+	qong_init_fpga();
+}
+
+static void __init qong_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer qong_timer = {
+	.init	= qong_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_QONG data structure.
+ */
+
+MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
+	/* Maintainer: DENX Software Engineering GmbH */
+	.phys_io        = AIPS1_BASE_ADDR,
+	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = qong_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &qong_timer,
+MACHINE_END
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
index 6c1023b8a9a..dc7b4bc003c 100644
--- a/arch/arm/mach-netx/include/mach/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -28,7 +28,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
 	       NETX_SYSTEM_RES_CR);
diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
index e2068c57415..1561588ca36 100644
--- a/arch/arm/mach-ns9xxx/include/mach/system.h
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -20,7 +20,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 #ifdef CONFIG_PROCESSOR_NS9360
 	if (processor_is_ns9360())
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 10a301e3243..3f325d3718a 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -7,6 +7,11 @@ config ARCH_OMAP730
 	select CPU_ARM926T
 	select ARCH_OMAP_OTG
 
+config ARCH_OMAP850
+	depends on ARCH_OMAP1
+	bool "OMAP850 Based System"
+	select CPU_ARM926T
+
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
@@ -46,6 +51,12 @@ config MACH_OMAP_H3
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
+config MACH_OMAP_HTCWIZARD
+	bool "HTC Wizard"
+	depends on ARCH_OMAP850
+	help
+	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
+
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
@@ -163,7 +174,7 @@ config OMAP_ARM_216MHZ
 
 config OMAP_ARM_195MHZ
 	bool "OMAP ARM 195 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 195MHz clock for OMAP CPU. If unsure, say N.
 
@@ -175,13 +186,13 @@ config OMAP_ARM_192MHZ
 
 config OMAP_ARM_182MHZ
 	bool "OMAP ARM 182 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 182MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_168MHZ
 	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 168MHz clock for OMAP CPU. If unsure, say N.
 
@@ -193,20 +204,20 @@ config OMAP_ARM_150MHZ
 
 config OMAP_ARM_120MHZ
 	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
         default y
 	help
           Enable 60MHz clock for OMAP CPU. If unsure, say Y.
 
 config OMAP_ARM_30MHZ
 	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2e618391cc5..8b40aace9db 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -175,7 +175,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 static struct omap_board_config_kernel ams_delta_config[] = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
 	{ OMAP_TAG_UART,	&ams_delta_uart_config },
-	{ OMAP_TAG_USB,		&ams_delta_usb_config },
 };
 
 static struct resource ams_delta_kp_resources[] = {
@@ -232,6 +231,7 @@ static void __init ams_delta_init(void)
 	/* Clear latch2 (NAND, LCD, modem enable) */
 	ams_delta_latch2_write(~0, 0);
 
+	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 }
 
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 30308294e7c..19e0e923233 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -34,7 +34,39 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 #include <mach/board.h>
-#include <mach/board-fsample.h>
+
+/* fsample is pretty close to p2-sample */
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
 
 static int fsample_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 7d267020537..e724940e86f 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -62,7 +62,6 @@ static struct omap_uart_config generic_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel generic_config[] __initdata = {
-	{ OMAP_TAG_USB,		NULL },
 	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
@@ -70,12 +69,12 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
-		generic_config[0].data = &generic1510_usb_config;
+		omap_usb_init(&generic1510_usb_config);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (!cpu_is_omap1510()) {
-		generic_config[0].data = &generic1610_usb_config;
+		omap_usb_init(&generic1610_usb_config);
 	}
 #endif
 
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 409fa56d0a8..44d4a966bed 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -19,6 +19,8 @@
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
+#include "board-h2.h"
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 0d784a79509..f695aa053ac 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -46,6 +46,11 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 
+#include "board-h2.h"
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START		0x04000300
+
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -364,7 +369,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
-	{ OMAP_TAG_USB,		&h2_usb_config },
 	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
@@ -413,6 +417,7 @@ static void __init h2_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
+	omap_usb_init(&h2_usb_config);
 	h2_mmc_init();
 }
 
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/mach-omap1/board-h2.h
index 15531c8dc0e..315e2662547 100644
--- a/arch/arm/plat-omap/include/mach/board-h2.h
+++ b/arch/arm/mach-omap1/board-h2.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/plat-omap/include/mach/board-h2.h
+ * arch/arm/mach-omap1/board-h2.h
  *
  * Hardware definitions for TI OMAP1610 H2 board.
  *
@@ -29,9 +29,6 @@
 #ifndef __ASM_ARCH_OMAP_H2_H
 #define __ASM_ARCH_OMAP_H2_H
 
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
 #define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
 #	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
 
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index fdfe793d56f..0d8a3c195e2 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -19,6 +19,8 @@
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
+#include "board-h3.h"
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index bf08b6ad22e..4695965114c 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -50,6 +50,11 @@
 #include <mach/dma.h>
 #include <mach/common.h>
 
+#include "board-h3.h"
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START		0x04000300
+
 #define H3_TS_GPIO	48
 
 static int h3_keymap[] = {
@@ -418,7 +423,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
-	{ OMAP_TAG_USB,		&h3_usb_config },
 	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
@@ -472,6 +476,7 @@ static void __init h3_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 			      ARRAY_SIZE(h3_i2c_board_info));
+	omap_usb_init(&h3_usb_config);
 	h3_mmc_init();
 }
 
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/mach-omap1/board-h3.h
index 1888326da7e..78de535be3c 100644
--- a/arch/arm/plat-omap/include/mach/board-h3.h
+++ b/arch/arm/mach-omap1/board-h3.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/plat-omap/include/mach/board-h3.h
+ * arch/arm/mach-omap1/board-h3.h
  *
  * Copyright (C) 2001 RidgeRun, Inc.
  * Copyright (C) 2004 Texas Instruments, Inc.
@@ -27,9 +27,6 @@
 #ifndef __ASM_ARCH_OMAP_H3_H
 #define __ASM_ARCH_OMAP_H3_H
 
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
 #define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
 #	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 071cd02a734..2fd98260ea4 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -39,6 +39,9 @@
 #include <mach/common.h>
 #include <mach/mmc.h>
 
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START	0x04000300
+
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
 	KEY(0, 3, KEY_DOWN),
@@ -370,7 +373,6 @@ static struct omap_uart_config innovator_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel innovator_config[] = {
-	{ OMAP_TAG_USB,         NULL },
 	{ OMAP_TAG_LCD,		NULL },
 	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
@@ -392,13 +394,13 @@ static void __init innovator_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		innovator_config[0].data = &innovator1510_usb_config;
+		omap_usb_init(&innovator1510_usb_config);
 		innovator_config[1].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
-		innovator_config[0].data = &h2_usb_config;
+		omap_usb_init(&h2_usb_config);
 		innovator_config[1].data = &innovator1610_lcd_config;
 	}
 #endif
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index af51e0b180f..7bc7a3cb9c5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -233,10 +233,6 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-static struct omap_board_config_kernel nokia770_config[] __initdata = {
-	{ OMAP_TAG_USB,		NULL },
-};
-
 #if	defined(CONFIG_OMAP_DSP)
 /*
  * audio power control
@@ -371,19 +367,16 @@ static __init int omap_dsp_init(void)
 
 static void __init omap_nokia770_init(void)
 {
-	nokia770_config[0].data = &nokia770_usb_config;
-
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
-	omap_board_config = nokia770_config;
-	omap_board_config_size = ARRAY_SIZE(nokia770_config);
 	omap_gpio_init();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap_dsp_init();
 	ads7846_dev_init();
 	mipid_dev_init();
+	omap_usb_init(&nokia770_usb_config);
 	nokia770_mmc_init();
 }
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 1a16ecb2ccc..cf3247b15f8 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -52,6 +52,20 @@
 #include <mach/tc.h>
 #include <mach/common.h>
 
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -290,7 +304,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #endif
 
 static struct omap_board_config_kernel osk_config[] __initdata = {
-	{ OMAP_TAG_USB,           &osk_usb_config },
 	{ OMAP_TAG_UART,		&osk_uart_config },
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 	{ OMAP_TAG_LCD,			&osk_lcd_config },
@@ -541,6 +554,8 @@ static void __init osk_init(void)
 	l |= (3 << 1);
 	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
+	omap_usb_init(&osk_usb_config);
+
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
 	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 99f2b43f254..886b4c0569b 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -43,6 +43,21 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 
+#define PALMTE_USBDETECT_GPIO	0
+#define PALMTE_USB_OR_DC_GPIO	1
+#define PALMTE_TSC_GPIO		4
+#define PALMTE_PINTDAV_GPIO	6
+#define PALMTE_MMC_WP_GPIO	8
+#define PALMTE_MMC_POWER_GPIO	9
+#define PALMTE_HDQ_GPIO		11
+#define PALMTE_HEADPHONES_GPIO	14
+#define PALMTE_SPEAKER_GPIO	15
+#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
+
 static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
@@ -286,7 +301,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 #endif
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
-	{ OMAP_TAG_USB,		&palmte_usb_config },
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
 	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
@@ -341,6 +355,7 @@ static void __init omap_palmte_init(void)
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 	palmte_misc_gpio_setup();
 	omap_serial_init();
+	omap_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 1cbc1275c95..4f1b44831d3 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -43,6 +43,13 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
+#define PALMTT_USBDETECT_GPIO	0
+#define PALMTT_CABLE_GPIO	1
+#define PALMTT_LED_GPIO		3
+#define PALMTT_PENIRQ_GPIO	6
+#define PALMTT_MMC_WP_GPIO	8
+#define PALMTT_HDQ_GPIO		11
+
 static int palmtt_keymap[] = {
 	KEY(0, 0, KEY_ESC),
 	KEY(0, 1, KEY_SPACE),
@@ -272,7 +279,6 @@ static struct omap_uart_config palmtt_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel palmtt_config[] __initdata = {
-	{ OMAP_TAG_USB,		&palmtt_usb_config	},
 	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
 	{ OMAP_TAG_UART,	&palmtt_uart_config	},
 };
@@ -297,6 +303,7 @@ static void __init omap_palmtt_init(void)
 
 	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
 	omap_serial_init();
+	omap_usb_init(&palmtt_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index baf5efbfe3e..9a55c3c5821 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -46,6 +46,16 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
+#define PALMZ71_USBDETECT_GPIO	0
+#define PALMZ71_PENIRQ_GPIO	6
+#define PALMZ71_MMC_WP_GPIO	8
+#define PALMZ71_HDQ_GPIO 	11
+
+#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
+
 static void __init
 omap_palmz71_init_irq(void)
 {
@@ -239,7 +249,6 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
-	{OMAP_TAG_USB,	&palmz71_usb_config},
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
 	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
@@ -313,6 +322,7 @@ omap_palmz71_init(void)
 
 	spi_register_board_info(palmz71_boardinfo,
 				ARRAY_SIZE(palmz71_boardinfo));
+	omap_usb_init(&palmz71_usb_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	palmz71_gpio_setup(0);
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 66a4d7d5255..58a46e4e45c 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -17,6 +17,7 @@
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/gpio.h>
+#include <mach/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 28c76a1e71c..c096577695f 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -41,6 +41,7 @@
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/keypad.h>
+#include <mach/board-sx1.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -373,7 +374,6 @@ static struct omap_uart_config sx1_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel sx1_config[] __initdata = {
-	{ OMAP_TAG_USB,	&sx1_usb_config },
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
 	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
@@ -388,6 +388,7 @@ static void __init omap_sx1_init(void)
 	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
+	omap_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
 
 	/* turn on USB power */
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index a7653542a2b..98275e03dad 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -145,7 +145,6 @@ static struct omap_uart_config voiceblue_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel voiceblue_config[] = {
-	{ OMAP_TAG_USB,  &voiceblue_usb_config },
 	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
@@ -185,6 +184,7 @@ static void __init voiceblue_init(void)
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
+	omap_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	/* There is a good chance board is going up, so enable power LED
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 5fba2073171..dafe4f71d15 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -20,41 +20,161 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
+#include <asm/clkdev.h>
 
 #include <mach/cpu.h>
 #include <mach/usb.h>
 #include <mach/clock.h>
 #include <mach/sram.h>
 
+static const struct clkops clkops_generic;
+static const struct clkops clkops_uart;
+static const struct clkops clkops_dspck;
+
 #include "clock.h"
 
+static int clk_omap1_dummy_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static void clk_omap1_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clkops_dummy = {
+	.enable = clk_omap1_dummy_enable,
+	.disable = clk_omap1_dummy_disable,
+};
+
+static struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_dummy,
+	.flags	= RATE_FIXED,
+};
+
+struct omap_clk {
+	u32		cpu;
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+#define CK_310	(1 << 0)
+#define CK_730	(1 << 1)
+#define CK_1510	(1 << 2)
+#define CK_16XX	(1 << 3)
+
+static struct omap_clk omap_clks[] = {
+	/* non-ULPD clocks */
+	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
+	/* CK_GEN1 clocks */
+	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
+	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
+	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
+	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
+	/* CK_GEN2 clocks */
+	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
+	/* CK_GEN3 clocks */
+	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_730),
+	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX),
+	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
+	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
+	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
+	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
+	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
+	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_730),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
+	/* ULPD clocks */
+	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
+	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
+	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
+	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
+	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
+	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
+	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
+	/* Virtual clocks */
+	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
+	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
+	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
+	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
+	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+};
+
+static int omap1_clk_enable_generic(struct clk * clk);
+static int omap1_clk_enable(struct clk *clk);
+static void omap1_clk_disable_generic(struct clk * clk);
+static void omap1_clk_disable(struct clk *clk);
+
 __u32 arm_idlect1_mask;
 
 /*-------------------------------------------------------------------------
  * Omap1 specific clock functions
  *-------------------------------------------------------------------------*/
 
-static void omap1_watchdog_recalc(struct clk * clk)
+static unsigned long omap1_watchdog_recalc(struct clk *clk)
 {
-	clk->rate = clk->parent->rate / 14;
+	return clk->parent->rate / 14;
 }
 
-static void omap1_uart_recalc(struct clk * clk)
+static unsigned long omap1_uart_recalc(struct clk *clk)
 {
-	unsigned int val = omap_readl(clk->enable_reg);
-	if (val & clk->enable_bit)
-		clk->rate = 48000000;
-	else
-		clk->rate = 12000000;
+	unsigned int val = __raw_readl(clk->enable_reg);
+	return val & clk->enable_bit ? 48000000 : 12000000;
 }
 
-static void omap1_sossi_recalc(struct clk *clk)
+static unsigned long omap1_sossi_recalc(struct clk *clk)
 {
 	u32 div = omap_readl(MOD_CONF_CTRL_1);
 
 	div = (div >> 17) & 0x7;
 	div++;
-	clk->rate = clk->parent->rate / div;
+
+	return clk->parent->rate / div;
 }
 
 static int omap1_clk_enable_dsp_domain(struct clk *clk)
@@ -78,6 +198,11 @@ static void omap1_clk_disable_dsp_domain(struct clk *clk)
 	}
 }
 
+static const struct clkops clkops_dspck = {
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
 static int omap1_clk_enable_uart_functional(struct clk *clk)
 {
 	int ret;
@@ -105,6 +230,11 @@ static void omap1_clk_disable_uart_functional(struct clk *clk)
 	omap1_clk_disable_generic(clk);
 }
 
+static const struct clkops clkops_uart = {
+	.enable		= &omap1_clk_enable_uart_functional,
+	.disable	= &omap1_clk_disable_uart_functional,
+};
+
 static void omap1_clk_allow_idle(struct clk *clk)
 {
 	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
@@ -197,9 +327,6 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	struct clk * parent;
 	unsigned  dsor_exp;
 
-	if (unlikely(!(clk->flags & RATE_CKCTL)))
-		return -EINVAL;
-
 	parent = clk->parent;
 	if (unlikely(parent == NULL))
 		return -EIO;
@@ -215,22 +342,15 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	return dsor_exp;
 }
 
-static void omap1_ckctl_recalc(struct clk * clk)
+static unsigned long omap1_ckctl_recalc(struct clk *clk)
 {
-	int dsor;
-
 	/* Calculate divisor encoded as 2-bit exponent */
-	dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+	int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
 
-	if (unlikely(clk->rate == clk->parent->rate / dsor))
-		return; /* No change, quick exit */
-	clk->rate = clk->parent->rate / dsor;
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
+	return clk->parent->rate / dsor;
 }
 
-static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
+static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
 {
 	int dsor;
 
@@ -245,12 +365,7 @@ static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
 	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
 	omap1_clk_disable(&api_ck.clk);
 
-	if (unlikely(clk->rate == clk->parent->rate / dsor))
-		return; /* No change, quick exit */
-	clk->rate = clk->parent->rate / dsor;
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
+	return clk->parent->rate / dsor;
 }
 
 /* MPU virtual clock functions */
@@ -289,35 +404,57 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
 
 	ck_dpll1.rate = ptr->pll_rate;
-	propagate_rate(&ck_dpll1);
 	return 0;
 }
 
 static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 {
-	int  ret = -EINVAL;
-	int  dsor_exp;
-	__u16  regval;
-
-	if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp > 3)
-			dsor_exp = -EINVAL;
-		if (dsor_exp < 0)
-			return dsor_exp;
-
-		regval = __raw_readw(DSP_CKCTL);
-		regval &= ~(3 << clk->rate_offset);
-		regval |= dsor_exp << clk->rate_offset;
-		__raw_writew(regval, DSP_CKCTL);
-		clk->rate = clk->parent->rate / (1 << dsor_exp);
-		ret = 0;
-	}
+	int dsor_exp;
+	u16 regval;
 
-	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
-		propagate_rate(clk);
+	dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp > 3)
+		dsor_exp = -EINVAL;
+	if (dsor_exp < 0)
+		return dsor_exp;
 
-	return ret;
+	regval = __raw_readw(DSP_CKCTL);
+	regval &= ~(3 << clk->rate_offset);
+	regval |= dsor_exp << clk->rate_offset;
+	__raw_writew(regval, DSP_CKCTL);
+	clk->rate = clk->parent->rate / (1 << dsor_exp);
+
+	return 0;
+}
+
+static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp < 0)
+		return dsor_exp;
+	if (dsor_exp > 3)
+		dsor_exp = 3;
+	return clk->parent->rate / (1 << dsor_exp);
+}
+
+static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp;
+	u16 regval;
+
+	dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp > 3)
+		dsor_exp = -EINVAL;
+	if (dsor_exp < 0)
+		return dsor_exp;
+
+	regval = omap_readw(ARM_CKCTL);
+	regval &= ~(3 << clk->rate_offset);
+	regval |= dsor_exp << clk->rate_offset;
+	regval = verify_ckctl_value(regval);
+	omap_writew(regval, ARM_CKCTL);
+	clk->rate = clk->parent->rate / (1 << dsor_exp);
+	return 0;
 }
 
 static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
@@ -372,14 +509,14 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
 {
 	unsigned int val;
 
-	val = omap_readl(clk->enable_reg);
+	val = __raw_readl(clk->enable_reg);
 	if (rate == 12000000)
 		val &= ~(1 << clk->enable_bit);
 	else if (rate == 48000000)
 		val |= (1 << clk->enable_bit);
 	else
 		return -EINVAL;
-	omap_writel(val, clk->enable_reg);
+	__raw_writel(val, clk->enable_reg);
 	clk->rate = rate;
 
 	return 0;
@@ -398,8 +535,8 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
 	else
 		ratio_bits = (dsor - 2) << 2;
 
-	ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
-	omap_writew(ratio_bits, clk->enable_reg);
+	ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
+	__raw_writew(ratio_bits, clk->enable_reg);
 
 	return 0;
 }
@@ -423,8 +560,6 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
 	omap_writel(l, MOD_CONF_CTRL_1);
 
 	clk->rate = p_rate / (div + 1);
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
 
 	return 0;
 }
@@ -440,8 +575,8 @@ static void omap1_init_ext_clk(struct clk * clk)
 	__u16 ratio_bits;
 
 	/* Determine current rate and ensure clock is based on 96MHz APLL */
-	ratio_bits = omap_readw(clk->enable_reg) & ~1;
-	omap_writew(ratio_bits, clk->enable_reg);
+	ratio_bits = __raw_readw(clk->enable_reg) & ~1;
+	__raw_writew(ratio_bits, clk->enable_reg);
 
 	ratio_bits = (ratio_bits & 0xfc) >> 2;
 	if (ratio_bits > 6)
@@ -468,7 +603,7 @@ static int omap1_clk_enable(struct clk *clk)
 				omap1_clk_deny_idle(clk->parent);
 		}
 
-		ret = clk->enable(clk);
+		ret = clk->ops->enable(clk);
 
 		if (unlikely(ret != 0) && clk->parent) {
 			omap1_clk_disable(clk->parent);
@@ -482,7 +617,7 @@ static int omap1_clk_enable(struct clk *clk)
 static void omap1_clk_disable(struct clk *clk)
 {
 	if (clk->usecount > 0 && !(--clk->usecount)) {
-		clk->disable(clk);
+		clk->ops->disable(clk);
 		if (likely(clk->parent)) {
 			omap1_clk_disable(clk->parent);
 			if (clk->flags & CLOCK_NO_IDLE_PARENT)
@@ -496,9 +631,6 @@ static int omap1_clk_enable_generic(struct clk *clk)
 	__u16 regval16;
 	__u32 regval32;
 
-	if (clk->flags & ALWAYS_ENABLED)
-		return 0;
-
 	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
@@ -506,25 +638,13 @@ static int omap1_clk_enable_generic(struct clk *clk)
 	}
 
 	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval32 = __raw_readl(clk->enable_reg);
-			regval32 |= (1 << clk->enable_bit);
-			__raw_writel(regval32, clk->enable_reg);
-		} else {
-			regval32 = omap_readl(clk->enable_reg);
-			regval32 |= (1 << clk->enable_bit);
-			omap_writel(regval32, clk->enable_reg);
-		}
+		regval32 = __raw_readl(clk->enable_reg);
+		regval32 |= (1 << clk->enable_bit);
+		__raw_writel(regval32, clk->enable_reg);
 	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval16 = __raw_readw(clk->enable_reg);
-			regval16 |= (1 << clk->enable_bit);
-			__raw_writew(regval16, clk->enable_reg);
-		} else {
-			regval16 = omap_readw(clk->enable_reg);
-			regval16 |= (1 << clk->enable_bit);
-			omap_writew(regval16, clk->enable_reg);
-		}
+		regval16 = __raw_readw(clk->enable_reg);
+		regval16 |= (1 << clk->enable_bit);
+		__raw_writew(regval16, clk->enable_reg);
 	}
 
 	return 0;
@@ -539,44 +659,26 @@ static void omap1_clk_disable_generic(struct clk *clk)
 		return;
 
 	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval32 = __raw_readl(clk->enable_reg);
-			regval32 &= ~(1 << clk->enable_bit);
-			__raw_writel(regval32, clk->enable_reg);
-		} else {
-			regval32 = omap_readl(clk->enable_reg);
-			regval32 &= ~(1 << clk->enable_bit);
-			omap_writel(regval32, clk->enable_reg);
-		}
+		regval32 = __raw_readl(clk->enable_reg);
+		regval32 &= ~(1 << clk->enable_bit);
+		__raw_writel(regval32, clk->enable_reg);
 	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval16 = __raw_readw(clk->enable_reg);
-			regval16 &= ~(1 << clk->enable_bit);
-			__raw_writew(regval16, clk->enable_reg);
-		} else {
-			regval16 = omap_readw(clk->enable_reg);
-			regval16 &= ~(1 << clk->enable_bit);
-			omap_writew(regval16, clk->enable_reg);
-		}
+		regval16 = __raw_readw(clk->enable_reg);
+		regval16 &= ~(1 << clk->enable_bit);
+		__raw_writew(regval16, clk->enable_reg);
 	}
 }
 
+static const struct clkops clkops_generic = {
+	.enable		= &omap1_clk_enable_generic,
+	.disable	= &omap1_clk_disable_generic,
+};
+
 static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	int dsor_exp;
-
 	if (clk->flags & RATE_FIXED)
 		return clk->rate;
 
-	if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp < 0)
-			return dsor_exp;
-		if (dsor_exp > 3)
-			dsor_exp = 3;
-		return clk->parent->rate / (1 << dsor_exp);
-	}
-
 	if (clk->round_rate != NULL)
 		return clk->round_rate(clk, rate);
 
@@ -586,30 +688,9 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int  ret = -EINVAL;
-	int  dsor_exp;
-	__u16  regval;
 
 	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
-	else if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp > 3)
-			dsor_exp = -EINVAL;
-		if (dsor_exp < 0)
-			return dsor_exp;
-
-		regval = omap_readw(ARM_CKCTL);
-		regval &= ~(3 << clk->rate_offset);
-		regval |= dsor_exp << clk->rate_offset;
-		regval = verify_ckctl_value(regval);
-		omap_writew(regval, ARM_CKCTL);
-		clk->rate = clk->parent->rate / (1 << dsor_exp);
-		ret = 0;
-	}
-
-	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
-		propagate_rate(clk);
-
 	return ret;
 }
 
@@ -632,17 +713,10 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 	}
 
 	/* Is the clock already disabled? */
-	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS)
-			regval32 = __raw_readl(clk->enable_reg);
-			else
-				regval32 = omap_readl(clk->enable_reg);
-	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS)
-			regval32 = __raw_readw(clk->enable_reg);
-		else
-			regval32 = omap_readw(clk->enable_reg);
-	}
+	if (clk->flags & ENABLE_REG_32BIT)
+		regval32 = __raw_readl(clk->enable_reg);
+	else
+		regval32 = __raw_readw(clk->enable_reg);
 
 	if ((regval32 & (1 << clk->enable_bit)) == 0)
 		return;
@@ -659,7 +733,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 	}
 
 	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
-	clk->disable(clk);
+	clk->ops->disable(clk);
 	printk(" done\n");
 }
 
@@ -677,10 +751,10 @@ static struct clk_functions omap1_clk_functions = {
 
 int __init omap1_clk_init(void)
 {
-	struct clk ** clkp;
+	struct omap_clk *c;
 	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
-	u32 reg;
+	u32 reg, cpu_mask;
 
 #ifdef CONFIG_DEBUG_LL
 	/* Resets some clocks that may be left on from bootloader,
@@ -700,27 +774,24 @@ int __init omap1_clk_init(void)
 	/* By default all idlect1 clocks are allowed to idle */
 	arm_idlect1_mask = ~0;
 
-	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
-		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
-			clk_register(*clkp);
-			continue;
-		}
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		clk_init_one(c->lk.clk);
 
-		if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) {
-			clk_register(*clkp);
-			continue;
+	cpu_mask = 0;
+	if (cpu_is_omap16xx())
+		cpu_mask |= CK_16XX;
+	if (cpu_is_omap1510())
+		cpu_mask |= CK_1510;
+	if (cpu_is_omap730())
+		cpu_mask |= CK_730;
+	if (cpu_is_omap310())
+		cpu_mask |= CK_310;
+
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		if (c->cpu & cpu_mask) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
 		}
-	}
 
 	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
 	if (info != NULL) {
@@ -769,7 +840,6 @@ int __init omap1_clk_init(void)
 			}
 		}
 	}
-	propagate_rate(&ck_dpll1);
 #else
 	/* Find the highest supported frequency and enable it */
 	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
@@ -778,9 +848,9 @@ int __init omap1_clk_init(void)
 		omap_writew(0x2290, DPLL_CTL);
 		omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
 		ck_dpll1.rate = 60000000;
-		propagate_rate(&ck_dpll1);
 	}
 #endif
+	propagate_rate(&ck_dpll1);
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
 	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
@@ -832,4 +902,3 @@ int __init omap1_clk_init(void)
 
 	return 0;
 }
-
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index c1dcdf18d8d..17f87427125 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -13,27 +13,22 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
-static int omap1_clk_enable_generic(struct clk * clk);
-static void omap1_clk_disable_generic(struct clk * clk);
-static void omap1_ckctl_recalc(struct clk * clk);
-static void omap1_watchdog_recalc(struct clk * clk);
+static unsigned long omap1_ckctl_recalc(struct clk *clk);
+static unsigned long omap1_watchdog_recalc(struct clk *clk);
 static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-static void omap1_sossi_recalc(struct clk *clk);
-static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
-static int omap1_clk_enable_dsp_domain(struct clk * clk);
+static unsigned long omap1_sossi_recalc(struct clk *clk);
+static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
 static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
-static void omap1_clk_disable_dsp_domain(struct clk * clk);
 static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
-static void omap1_uart_recalc(struct clk * clk);
-static int omap1_clk_enable_uart_functional(struct clk * clk);
-static void omap1_clk_disable_uart_functional(struct clk * clk);
+static unsigned long omap1_uart_recalc(struct clk *clk);
 static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
 static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
 static void omap1_init_ext_clk(struct clk * clk);
 static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
 static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
-static int omap1_clk_enable(struct clk *clk);
-static void omap1_clk_disable(struct clk *clk);
+
+static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
 
 struct mpu_rate {
 	unsigned long		rate;
@@ -152,101 +147,84 @@ static struct mpu_rate rate_table[] = {
 
 static struct clk ck_ref = {
 	.name		= "ck_ref",
+	.ops		= &clkops_null,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk ck_dpll1 = {
 	.name		= "ck_dpll1",
+	.ops		= &clkops_null,
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct arm_idlect1_clk ck_dpll1out = {
 	.clk = {
 		.name		= "ck_dpll1out",
+		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
-				  ENABLE_REG_32BIT | RATE_PROPAGATES,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 12,
 };
 
 static struct clk sossi_ck = {
 	.name		= "ck_sossi",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1out.clk,
-	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
-			  ENABLE_REG_32BIT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_1,
+	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
 	.enable_bit	= 16,
 	.recalc		= &omap1_sossi_recalc,
 	.set_rate	= &omap1_set_sossi_rate,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk arm_ck = {
 	.name		= "arm_ck",
+	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES |
-			  ALWAYS_ENABLED,
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
 static struct arm_idlect1_clk armper_ck = {
 	.clk = {
 		.name		= "armper_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | RATE_CKCTL |
-				  CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_PERCK,
 		.rate_offset	= CKCTL_PERDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
 	.idlect_shift	= 2,
 };
 
 static struct clk arm_gpio_ck = {
 	.name		= "arm_gpio_ck",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
-	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 	.enable_bit	= EN_GPIOCK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct arm_idlect1_clk armxor_ck = {
 	.clk = {
 		.name		= "armxor_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_XORPCK,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 1,
 };
@@ -254,14 +232,12 @@ static struct arm_idlect1_clk armxor_ck = {
 static struct arm_idlect1_clk armtim_ck = {
 	.clk = {
 		.name		= "armtim_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_TIMCK,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 9,
 };
@@ -269,201 +245,166 @@ static struct arm_idlect1_clk armtim_ck = {
 static struct arm_idlect1_clk armwdt_ck = {
 	.clk = {
 		.name		= "armwdt_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_WDTCK,
 		.recalc		= &omap1_watchdog_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 0,
 };
 
 static struct clk arminth_ck16xx = {
 	.name		= "arminth_ck",
+	.ops		= &clkops_null,
 	.parent		= &arm_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	/* Note: On 16xx the frequency can be divided by 2 by programming
 	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
 	 *
 	 * 1510 version is in TC clocks.
 	 */
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk dsp_ck = {
 	.name		= "dsp_ck",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL,
-	.enable_reg	= (void __iomem *)ARM_CKCTL,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
 	.enable_bit	= EN_DSPCK,
 	.rate_offset	= CKCTL_DSPDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
 static struct clk dspmmu_ck = {
 	.name		= "dspmmu_ck",
+	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | ALWAYS_ENABLED,
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
 static struct clk dspper_ck = {
 	.name		= "dspper_ck",
+	.ops		= &clkops_dspck,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc_dsp_domain,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
 	.set_rate	= &omap1_clk_set_rate_dsp_domain,
-	.enable		= &omap1_clk_enable_dsp_domain,
-	.disable	= &omap1_clk_disable_dsp_domain,
 };
 
 static struct clk dspxor_ck = {
 	.name		= "dspxor_ck",
+	.ops		= &clkops_dspck,
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_dsp_domain,
-	.disable	= &omap1_clk_disable_dsp_domain,
 };
 
 static struct clk dsptim_ck = {
 	.name		= "dsptim_ck",
+	.ops		= &clkops_dspck,
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_dsp_domain,
-	.disable	= &omap1_clk_disable_dsp_domain,
 };
 
 /* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
 static struct arm_idlect1_clk tc_ck = {
 	.clk = {
 		.name		= "tc_ck",
+		.ops		= &clkops_null,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
-				  RATE_CKCTL | RATE_PROPAGATES |
-				  ALWAYS_ENABLED | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
 	.idlect_shift	= 6,
 };
 
 static struct clk arminth_ck1510 = {
 	.name		= "arminth_ck",
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	/* Note: On 1510 the frequency follows TC_CK
 	 *
 	 * 16xx version is in MPU clocks.
 	 */
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk tipb_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "tipb_ck",
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk l3_ocpi_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "l3_ocpi_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_OCPI_CK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk tc1_ck = {
 	.name		= "tc1_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_TC1_CK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk tc2_ck = {
 	.name		= "tc2_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_TC2_CK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk dma_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "dma_ck",
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk dma_lcdfree_ck = {
 	.name		= "dma_lcdfree_ck",
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct arm_idlect1_clk api_ck = {
 	.clk = {
 		.name		= "api_ck",
+		.ops		= &clkops_generic,
 		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_APICK,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 8,
 };
@@ -471,276 +412,238 @@ static struct arm_idlect1_clk api_ck = {
 static struct arm_idlect1_clk lb_ck = {
 	.clk = {
 		.name		= "lb_ck",
+		.ops		= &clkops_generic,
 		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-				  CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_LBCK,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 4,
 };
 
 static struct clk rhea1_ck = {
 	.name		= "rhea1_ck",
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk rhea2_ck = {
 	.name		= "rhea2_ck",
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk lcd_ck_16xx = {
 	.name		= "lcd_ck",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 	.enable_bit	= EN_LCDCK,
 	.rate_offset	= CKCTL_LCDDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
 static struct arm_idlect1_clk lcd_ck_1510 = {
 	.clk = {
 		.name		= "lcd_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-				  RATE_CKCTL | CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_LCDCK,
 		.rate_offset	= CKCTL_LCDDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
 	.idlect_shift	= 3,
 };
 
 static struct clk uart1_1510 = {
 	.name		= "uart1_ck",
+	.ops		= &clkops_null,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
-			  CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct uart_clk uart1_16xx = {
 	.clk	= {
 		.name		= "uart1_ck",
+		.ops		= &clkops_uart,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
-				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
+				  CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 29,
-		.enable		= &omap1_clk_enable_uart_functional,
-		.disable	= &omap1_clk_disable_uart_functional,
 	},
 	.sysc_addr	= 0xfffb0054,
 };
 
 static struct clk uart2_ck = {
 	.name		= "uart2_ck",
+	.ops		= &clkops_null,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
-			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk uart3_1510 = {
 	.name		= "uart3_ck",
+	.ops		= &clkops_null,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
-			  CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct uart_clk uart3_16xx = {
 	.clk	= {
 		.name		= "uart3_ck",
+		.ops		= &clkops_uart,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
-				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
+				  CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 31,
-		.enable		= &omap1_clk_enable_uart_functional,
-		.disable	= &omap1_clk_disable_uart_functional,
 	},
 	.sysc_addr	= 0xfffb9854,
 };
 
 static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	.name		= "usb_clko",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 6000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= (void __iomem *)ULPD_CLOCK_CTRL,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
 	.enable_bit	= USB_MCLK_EN_BIT,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk usb_hhc_ck1510 = {
 	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk usb_hhc_ck16xx = {
 	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
 	.enable_bit	= 8 /* UHOST_EN */,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk usb_dc_ck = {
 	.name		= "usb_dc_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
-	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 4,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk mclk_1510 = {
 	.name		= "mclk",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
- 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
- 	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
- 	.enable_bit	= 6,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 6,
 };
 
 static struct clk mclk_16xx = {
 	.name		= "mclk",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= (void __iomem *)COM_CLK_DIV_CTRL_SEL,
+	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
 	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
 	.round_rate	= &omap1_round_ext_clk_rate,
 	.init		= &omap1_init_ext_clk,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk bclk_1510 = {
 	.name		= "bclk",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk bclk_16xx = {
 	.name		= "bclk",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.flags		= CLOCK_IN_OMAP16XX,
-	.enable_reg	= (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
+	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
 	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
 	.round_rate	= &omap1_round_ext_clk_rate,
 	.init		= &omap1_init_ext_clk,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk mmc1_ck = {
 	.name		= "mmc_ck",
+	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
-			  CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 23,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk mmc2_ck = {
 	.name		= "mmc_ck",
 	.id		= 1,
+	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 20,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk virtual_ck_mpu = {
 	.name		= "mpu",
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+	.ops		= &clkops_null,
 	.parent		= &arm_ck, /* Is smarter alias for */
 	.recalc		= &followparent_recalc,
 	.set_rate	= &omap1_select_table_rate,
 	.round_rate	= &omap1_round_to_table_rate,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
@@ -748,78 +651,19 @@ remains active during MPU idle whenever this is enabled */
 static struct clk i2c_fck = {
 	.name		= "i2c_fck",
 	.id		= 1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
-			  ALWAYS_ENABLED,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armxor_ck.clk,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk i2c_ick = {
 	.name		= "i2c_ick",
 	.id		= 1,
-	.flags		= CLOCK_IN_OMAP16XX |
-			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
-			  ALWAYS_ENABLED,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armper_ck.clk,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
-};
-
-static struct clk * onchip_clks[] = {
-	/* non-ULPD clocks */
-	&ck_ref,
-	&ck_dpll1,
-	/* CK_GEN1 clocks */
-	&ck_dpll1out.clk,
-	&sossi_ck,
-	&arm_ck,
-	&armper_ck.clk,
-	&arm_gpio_ck,
-	&armxor_ck.clk,
-	&armtim_ck.clk,
-	&armwdt_ck.clk,
-	&arminth_ck1510,  &arminth_ck16xx,
-	/* CK_GEN2 clocks */
-	&dsp_ck,
-	&dspmmu_ck,
-	&dspper_ck,
-	&dspxor_ck,
-	&dsptim_ck,
-	/* CK_GEN3 clocks */
-	&tc_ck.clk,
-	&tipb_ck,
-	&l3_ocpi_ck,
-	&tc1_ck,
-	&tc2_ck,
-	&dma_ck,
-	&dma_lcdfree_ck,
-	&api_ck.clk,
-	&lb_ck.clk,
-	&rhea1_ck,
-	&rhea2_ck,
-	&lcd_ck_16xx,
-	&lcd_ck_1510.clk,
-	/* ULPD clocks */
-	&uart1_1510,
-	&uart1_16xx.clk,
-	&uart2_ck,
-	&uart3_1510,
-	&uart3_16xx.clk,
-	&usb_clko,
-	&usb_hhc_ck1510, &usb_hhc_ck16xx,
-	&usb_dc_ck,
-	&mclk_1510,  &mclk_16xx,
-	&bclk_1510,  &bclk_16xx,
-	&mmc1_ck,
-	&mmc2_ck,
-	/* Virtual clocks */
-	&virtual_ck_mpu,
-	&i2c_fck,
-	&i2c_ick,
 };
 
 #endif
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ba5d7c08dc1..bbbaeb0abcd 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -86,7 +86,7 @@ static struct resource mbox_resources[] = {
 };
 
 static struct platform_device mbox_device = {
-	.name		= "mailbox",
+	.name		= "omap1-mailbox",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(mbox_resources),
 	.resource	= mbox_resources,
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 89bb8756f45..4ef26faf083 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -38,6 +38,7 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
@@ -77,7 +78,7 @@ static u16 __init omap_get_jtag_id(void)
 	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
 	omap_id = omap_readl(OMAP32_ID_1);
 
-	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */
 	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
 		prod_id = 0;
 	else
@@ -178,6 +179,7 @@ void __init omap_check_revision(void)
 
 	switch (cpu_type) {
 	case 0x07:
+	case 0x08:
 		omap_revision |= 0x07;
 		break;
 	case 0x03:
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 4c3e582f3d3..3afe540149f 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -52,6 +52,22 @@ static struct map_desc omap730_io_desc[] __initdata = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct map_desc omap850_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP850_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP850_DSP_START),
+		.length		= OMAP850_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP850_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP850_DSPREG_START),
+		.length		= OMAP850_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
 	{
@@ -109,6 +125,13 @@ void __init omap1_map_common_io(void)
 		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
 	}
 #endif
+
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+	}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9ad5197075f..de03c844899 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -145,6 +145,14 @@ static struct omap_irq_bank omap730_irq_banks[] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct omap_irq_bank omap850_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
+	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
@@ -184,6 +192,12 @@ void __init omap_init_irq(void)
 		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		irq_banks = omap850_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+	}
+#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
@@ -214,9 +228,8 @@ void __init omap_init_irq(void)
 	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
 
 	/* Enable interrupts in global mask */
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx())
 		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
-	}
 
 	/* Install the interrupt handlers for each bank */
 	for (i = 0; i < irq_bank_count; i++) {
@@ -236,6 +249,8 @@ void __init omap_init_irq(void)
 
 	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
+	else if (cpu_is_omap850())
+		omap_unmask_irq(INT_850_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 59abbf331a9..0af4d6c85b4 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -1,7 +1,7 @@
 /*
  * Mailbox reservation modules for DSP
  *
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
  * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -27,7 +27,7 @@
 #define MAILBOX_DSP2ARM1_Flag		0x1c
 #define MAILBOX_DSP2ARM2_Flag		0x20
 
-unsigned long mbox_base;
+static void __iomem *mbox_base;
 
 struct omap_mbox1_fifo {
 	unsigned long cmd;
@@ -40,14 +40,14 @@ struct omap_mbox1_priv {
 	struct omap_mbox1_fifo rx_fifo;
 };
 
-static inline int mbox_read_reg(unsigned int reg)
+static inline int mbox_read_reg(size_t ofs)
 {
-	return __raw_readw(mbox_base + reg);
+	return __raw_readw(mbox_base + ofs);
 }
 
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
 {
-	__raw_writew(val, mbox_base + reg);
+	__raw_writew(val, mbox_base + ofs);
 }
 
 /* msg */
@@ -143,7 +143,7 @@ struct omap_mbox mbox_dsp_info = {
 };
 EXPORT_SYMBOL(mbox_dsp_info);
 
-static int __init omap1_mbox_probe(struct platform_device *pdev)
+static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	int ret = 0;
@@ -170,12 +170,10 @@ static int __init omap1_mbox_probe(struct platform_device *pdev)
 	}
 	mbox_dsp_info.irq = res->start;
 
-	ret = omap_mbox_register(&mbox_dsp_info);
-
-	return ret;
+	return omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 }
 
-static int omap1_mbox_remove(struct platform_device *pdev)
+static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 {
 	omap_mbox_unregister(&mbox_dsp_info);
 
@@ -184,9 +182,9 @@ static int omap1_mbox_remove(struct platform_device *pdev)
 
 static struct platform_driver omap1_mbox_driver = {
 	.probe	= omap1_mbox_probe,
-	.remove	= omap1_mbox_remove,
+	.remove	= __devexit_p(omap1_mbox_remove),
 	.driver	= {
-		.name	= "mailbox",
+		.name	= "omap1-mailbox",
 	},
 };
 
@@ -203,4 +201,7 @@ static void __exit omap1_mbox_exit(void)
 module_init(omap1_mbox_init);
 module_exit(omap1_mbox_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 575ba31295c..d040c3f1027 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -28,9 +28,9 @@
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
 
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
-#endif
+static int dsp_use;
+static struct clk *api_clk;
+static struct clk *dsp_clk;
 
 static void omap1_mcbsp_request(unsigned int id)
 {
@@ -39,20 +39,40 @@ static void omap1_mcbsp_request(unsigned int id)
 	 * are DSP public peripherals.
 	 */
 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
-		omap_dsp_request_mem();
-		/*
-		 * DSP external peripheral reset
-		 * FIXME: This should be moved to dsp code
-		 */
-		__raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
-				DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+		if (dsp_use++ == 0) {
+			api_clk = clk_get(NULL, "api_clk");
+			dsp_clk = clk_get(NULL, "dsp_clk");
+			if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
+				clk_enable(api_clk);
+				clk_enable(dsp_clk);
+
+				omap_dsp_request_mem();
+				/*
+				 * DSP external peripheral reset
+				 * FIXME: This should be moved to dsp code
+				 */
+				__raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
+						DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+			}
+		}
 	}
 }
 
 static void omap1_mcbsp_free(unsigned int id)
 {
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
-		omap_dsp_release_mem();
+	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+		if (--dsp_use == 0) {
+			omap_dsp_release_mem();
+			if (!IS_ERR(api_clk)) {
+				clk_disable(api_clk);
+				clk_put(api_clk);
+			}
+			if (!IS_ERR(dsp_clk)) {
+				clk_disable(dsp_clk);
+				clk_put(dsp_clk);
+			}
+		}
+	}
 }
 
 static struct omap_mcbsp_ops omap1_mcbsp_ops = {
@@ -94,8 +114,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP1RX,
 		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 3,
 	},
 	{
 		.phys_base	= OMAP1510_MCBSP2_BASE,
@@ -112,8 +130,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP3RX,
 		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 3,
 	},
 };
 #define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
@@ -131,8 +147,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP1RX,
 		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 3,
 	},
 	{
 		.phys_base	= OMAP1610_MCBSP2_BASE,
@@ -149,8 +163,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP3RX,
 		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 3,
 	},
 };
 #define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 062c905c2ba..721e0d9d8b1 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -58,6 +58,25 @@ MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
 #define OMAP730_PINS_SZ		0
 #endif	/* CONFIG_ARCH_OMAP730 */
 
+#ifdef CONFIG_ARCH_OMAP850
+struct pin_config __initdata_or_module omap850_pins[] = {
+MUX_CFG_850("E2_850_KBR0",        12,   21,    0,   20,   1, 0)
+MUX_CFG_850("J7_850_KBR1",        12,   25,    0,   24,   1, 0)
+MUX_CFG_850("E1_850_KBR2",        12,   29,    0,   28,   1, 0)
+MUX_CFG_850("F3_850_KBR3",        13,    1,    0,    0,   1, 0)
+MUX_CFG_850("D2_850_KBR4",        13,    5,    0,    4,   1, 0)
+MUX_CFG_850("C2_850_KBC0",        13,    9,    0,    8,   1, 0)
+MUX_CFG_850("D3_850_KBC1",        13,   13,    0,   12,   1, 0)
+MUX_CFG_850("E4_850_KBC2",        13,   17,    0,   16,   1, 0)
+MUX_CFG_850("F4_850_KBC3",        13,   21,    0,   20,   1, 0)
+MUX_CFG_850("E3_850_KBC4",        13,   25,    0,   24,   1, 0)
+
+MUX_CFG_850("AA17_850_USB_DM",     2,   21,    0,   20,   0, 0)
+MUX_CFG_850("W16_850_USB_PU_EN",   2,   25,    0,   24,   0, 0)
+MUX_CFG_850("W17_850_USB_VBUSI",   2,   29,    0,   28,   0, 0)
+};
+#endif
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config __initdata_or_module omap1xxx_pins[] = {
 /*
@@ -419,6 +438,11 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
 	}
+
+#ifdef CONFIG_ARCH_OMAP850
+	omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
+#endif
+
 #endif
 
 #ifdef CONFIG_OMAP_MUX_ERRORS
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0002084e065..842090b148f 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -121,6 +121,13 @@ void __init omap_serial_init(void)
 		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
 	}
 
+	if (cpu_is_omap850()) {
+		serial_platform_data[0].regshift = 0;
+		serial_platform_data[1].regshift = 0;
+		serial_platform_data[0].irq = INT_850_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+	}
+
 	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3754b79092a..64ab386a65c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -58,4 +58,12 @@ config MACH_OVERO
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
\ No newline at end of file
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_3430SDP
+	bool "OMAP 3430 SDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_NOKIA_RX51
+	bool "Nokia RX-51 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bbd12bc10fd..a2c3fcc27a2 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
 		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
 		clockdomain.o
 
@@ -14,6 +14,10 @@ obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
+# SMS/SDRC
+obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
+# obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
+
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-y					+= pm.o
@@ -38,4 +42,12 @@ obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
+					   mmc-twl4030.o
 
+obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
+					   board-rx51-peripherals.o \
+# Platform specific device init code
+ifeq ($(CONFIG_USB_MUSB_SOC),y)
+obj-y					+= usb-musb.o
+endif
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 83fa37211d7..22143651037 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -35,12 +35,16 @@
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/gpmc.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
+#define SDP2430_CS0_BASE	0x04000000
 #define	SDP2430_FLASH_CS	0
 #define	SDP2430_SMC91X_CS	5
 
+#define SDP2430_ETHR_GPIO_IRQ		149
+
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -102,8 +106,8 @@ static struct resource sdp2430_smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
@@ -170,13 +174,13 @@ static inline void __init sdp2430_init_smc91x(void)
 	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
 	udelay(100);
 
-	if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
+	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			OMAP24XX_ETHR_GPIO_IRQ);
+			SDP2430_ETHR_GPIO_IRQ);
 		gpmc_cs_free(eth_cs);
 		goto out;
 	}
-	gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
+	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
 
 out:
 	clk_disable(gpmc_fck);
@@ -185,7 +189,7 @@ out:
 
 static void __init omap_2430sdp_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	sdp2430_init_smc91x();
@@ -251,6 +255,7 @@ static void __init omap_2430sdp_init(void)
 	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
+	usb_musb_init();
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
new file mode 100644
index 00000000000..ed927497212
--- /dev/null
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -0,0 +1,542 @@
+/*
+ * linux/arch/arm/mach-omap2/board-3430sdp.c
+ *
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+
+#include <mach/control.h>
+#include <mach/keypad.h>
+
+#include "mmc-twl4030.h"
+
+#define CONFIG_DISABLE_HFCLK 1
+
+#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
+#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
+#define SDP3430_SMC91X_CS		3
+
+#define SDP3430_TS_GPIO_IRQ_SDPV1	3
+#define SDP3430_TS_GPIO_IRQ_SDPV2	2
+
+#define ENABLE_VAUX3_DEDICATED	0x03
+#define ENABLE_VAUX3_DEV_GRP	0x20
+
+#define TWL4030_MSECURE_GPIO 22
+
+static struct resource sdp3430_smc91x_resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device sdp3430_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),
+	.resource	= sdp3430_smc91x_resources,
+};
+
+static int sdp3430_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(0, 4, KEY_C),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(1, 4, KEY_G),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(2, 4, KEY_3),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P),
+	KEY(3, 4, KEY_Q),
+	KEY(4, 0, KEY_R),
+	KEY(4, 1, KEY_4),
+	KEY(4, 2, KEY_T),
+	KEY(4, 3, KEY_U),
+	KEY(4, 4, KEY_D),
+	KEY(5, 0, KEY_V),
+	KEY(5, 1, KEY_W),
+	KEY(5, 2, KEY_L),
+	KEY(5, 3, KEY_S),
+	KEY(5, 4, KEY_H),
+	0
+};
+
+static struct twl4030_keypad_data sdp3430_kp_data = {
+	.rows		= 5,
+	.cols		= 6,
+	.keymap		= sdp3430_keymap,
+	.keymapsize	= ARRAY_SIZE(sdp3430_keymap),
+	.rep		= 1,
+};
+
+static int ts_gpio;	/* Needed for ads7846_get_pendown_state */
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ts_gpio);
+
+	omap_set_gpio_debounce(ts_gpio, 1);
+	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
+	[0] = {
+		/*
+		 * TSC2046 operates at a max freqency of 2MHz, so
+		 * operate slightly below at 1.5MHz
+		 */
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &tsc2046_mcspi_config,
+		.irq			= 0,
+		.platform_data		= &tsc2046_config,
+	},
+};
+
+static struct platform_device sdp3430_lcd_device = {
+	.name		= "sdp2430_lcd",
+	.id		= -1,
+};
+
+static struct regulator_consumer_supply sdp3430_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &sdp3430_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply sdp3430_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &sdp3430_lcd_device.dev,
+};
+
+static struct platform_device *sdp3430_devices[] __initdata = {
+	&sdp3430_smc91x_device,
+	&sdp3430_lcd_device,
+};
+
+static inline void __init sdp3430_init_smc91x(void)
+{
+	int eth_cs;
+	unsigned long cs_mem_base;
+	int eth_gpio = 0;
+
+	eth_cs = SDP3430_SMC91X_CS;
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
+	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
+	udelay(100);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
+	else
+		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
+
+	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
+
+	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+			eth_gpio);
+		return;
+	}
+	gpio_direction_input(eth_gpio);
+}
+
+static void __init omap_3430sdp_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	sdp3430_init_smc91x();
+}
+
+static struct omap_uart_config sdp3430_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config sdp3430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp3430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp3430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
+};
+
+static int sdp3430_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
+8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
+5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
+4040,   3910,   3790,   3670,   3550
+};
+
+static struct twl4030_bci_platform_data sdp3430_bci_data = {
+	.battery_tmp_tbl	= sdp3430_batt_table,
+	.tblsize		= ARRAY_SIZE(sdp3430_batt_table),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		/* 8 bits (default) requires S6.3 == ON,
+		 * so the SIM card isn't used; else 4 bits.
+		 */
+		.wires		= 8,
+		.gpio_wp	= 4,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_wp	= 7,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply sdp3430_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
+static int sdp3430_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ),
+	 * gpio + 1 is "mmc1_cd" (input/IRQ)
+	 */
+	mmc[0].gpio_cd = gpio + 0;
+	mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	 */
+	sdp3430_vmmc1_supply.dev = mmc[0].dev;
+	sdp3430_vsim_supply.dev = mmc[0].dev;
+	sdp3430_vmmc2_supply.dev = mmc[1].dev;
+
+	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
+	gpio_request(gpio + 7, "sub_lcd_en_bkl");
+	gpio_direction_output(gpio + 7, 0);
+
+	/* gpio + 15 is "sub_lcd_nRST" (output) */
+	gpio_request(gpio + 15, "sub_lcd_nRST");
+	gpio_direction_output(gpio + 15, 0);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
+				| BIT(16) | BIT(17),
+	.setup		= sdp3430_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data sdp3430_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_madc_platform_data sdp3430_madc_data = {
+	.irq_line	= 1,
+};
+
+/*
+ * Apply all the fixed voltages since most versions of U-Boot
+ * don't bother with that initialization.
+ */
+
+/* VAUX1 for mainboard (irda and sub-lcd) */
+static struct regulator_init_data sdp3430_vaux1 = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VAUX2 for camera module */
+static struct regulator_init_data sdp3430_vaux2 = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VAUX3 for LCD board */
+static struct regulator_init_data sdp3430_vaux3 = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VAUX4 for OMAP VDD_CSI2 (camera) */
+static struct regulator_init_data sdp3430_vaux4 = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp3430_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data sdp3430_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data sdp3430_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data sdp3430_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data sdp3430_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vdvi_supply,
+};
+
+static struct twl4030_platform_data sdp3430_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.bci		= &sdp3430_bci_data,
+	.gpio		= &sdp3430_gpio_data,
+	.madc		= &sdp3430_madc_data,
+	.keypad		= &sdp3430_kp_data,
+	.usb		= &sdp3430_usb_data,
+
+	.vaux1		= &sdp3430_vaux1,
+	.vaux2		= &sdp3430_vaux2,
+	.vaux3		= &sdp3430_vaux3,
+	.vaux4		= &sdp3430_vaux4,
+	.vmmc1		= &sdp3430_vmmc1,
+	.vmmc2		= &sdp3430_vmmc2,
+	.vsim		= &sdp3430_vsim,
+	.vdac		= &sdp3430_vdac,
+	.vpll2		= &sdp3430_vpll2,
+};
+
+static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &sdp3430_twldata,
+	},
+};
+
+static int __init omap3430_i2c_init(void)
+{
+	/* i2c1 for PMIC only */
+	omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
+			ARRAY_SIZE(sdp3430_i2c_boardinfo));
+	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	/* i2c3 on display connector (for DVI, tfp410) */
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static void __init omap_3430sdp_init(void)
+{
+	omap3430_i2c_init();
+	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
+	omap_board_config = sdp3430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
+	else
+		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
+	sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+	spi_register_board_info(sdp3430_spi_board_info,
+				ARRAY_SIZE(sdp3430_spi_board_info));
+	ads7846_dev_init();
+	omap_serial_init();
+	usb_musb_init();
+}
+
+static void __init omap_3430sdp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
+	/* Maintainer: Syed Khasim - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_3430sdp_map_io,
+	.init_irq	= omap_3430sdp_init_irq,
+	.init_machine	= omap_3430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 0a7b24ba165..06dfba888b0 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -51,6 +51,7 @@
 
 #define APOLLON_FLASH_CS	0
 #define APOLLON_ETH_CS		1
+#define APOLLON_ETHR_GPIO_IRQ	74
 
 static struct mtd_partition apollon_partitions[] = {
 	{
@@ -249,7 +250,7 @@ out:
 
 static void __init omap_apollon_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	apollon_init_smc91x();
@@ -272,7 +273,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 
 static struct omap_board_config_kernel apollon_config[] = {
 	{ OMAP_TAG_UART,	&apollon_uart_config },
-	{ OMAP_TAG_USB,		&apollon_usb_config },
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
@@ -299,6 +299,7 @@ static void __init apollon_usb_init(void)
 	omap_cfg_reg(P21_242X_GPIO12);
 	gpio_request(12, "USB suspend");
 	gpio_direction_output(12, 0);
+	omap_usb_init(&apollon_usb_config);
 }
 
 static void __init omap_apollon_init(void)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3b34c20d1df..3492162a65c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,7 +33,7 @@
 
 static void __init omap_generic_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 5e9b14675b1..a0267a9ab46 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -47,6 +47,8 @@
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
 
+#define H4_ETHR_GPIO_IRQ		92
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -341,7 +343,7 @@ static inline void __init h4_init_debug(void)
 	udelay(100);
 
 	omap_cfg_reg(M15_24XX_GPIO92);
-	if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
 
 out:
@@ -363,7 +365,7 @@ static void __init h4_init_flash(void)
 
 static void __init omap_h4_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	h4_init_flash();
@@ -377,6 +379,39 @@ static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
+static struct omap_usb_config h4_usb_config __initdata = {
+#ifdef	CONFIG_MACH_OMAP2_H4_USB1
+	/* NOTE:  usb1 could also be used with 3 wire signaling */
+	.pins[1]	= 4,
+#endif
+
+#ifdef	CONFIG_MACH_OMAP_H4_OTG
+	/* S1.10 ON -- USB OTG port
+	 * usb0 switched to Mini-AB port and isp1301 transceiver;
+	 * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
+	 */
+	.otg		= 1,
+	.pins[0]	= 4,
+#ifdef	CONFIG_USB_GADGET_OMAP
+	/* use OTG cable, or standard A-to-MiniB */
+	.hmc_mode	= 0x14,	/* 0:dev/otg 1:host 2:disable */
+#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* use OTG cable, or NONSTANDARD (B-to-MiniB) */
+	.hmc_mode	= 0x11,	/* 0:host 1:host 2:disable */
+#endif	/* XX */
+
+#else
+	/* S1.10 OFF -- usb "download port"
+	 * usb0 switched to Mini-B port and isp1105 transceiver;
+	 * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
+	 */
+	.register_dev	= 1,
+	.pins[0]	= 3,
+/*	.hmc_mode	= 0x14,*/	/* 0:dev 1:host 2:disable */
+	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
+#endif
+};
+
 static struct omap_board_config_kernel h4_config[] = {
 	{ OMAP_TAG_UART,	&h4_uart_config },
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
@@ -428,6 +463,7 @@ static void __init omap_h4_init(void)
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
 	omap_board_config = h4_config;
 	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap_usb_init(&h4_usb_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f6a13451d1f..e096f776f99 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,31 +22,34 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ldp.h>
 #include <mach/mcspi.h>
 #include <mach/gpio.h>
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/gpmc.h>
 
-#include <asm/io.h>
 #include <asm/delay.h>
 #include <mach/control.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
-#define SDP3430_SMC91X_CS	3
+#define LDP_SMC911X_CS		1
+#define LDP_SMC911X_GPIO	152
+#define DEBUG_BASE		0x08000000
+#define LDP_ETHR_START		DEBUG_BASE
 
 static struct resource ldp_smc911x_resources[] = {
 	[0] = {
-		.start	= OMAP34XX_ETHR_START,
-		.end	= OMAP34XX_ETHR_START + SZ_4K,
+		.start	= LDP_ETHR_START,
+		.end	= LDP_ETHR_START + SZ_4K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -81,7 +84,7 @@ static inline void __init ldp_init_smc911x(void)
 	}
 
 	ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
-	ldp_smc911x_resources[0].end   = cs_mem_base + 0xf;
+	ldp_smc911x_resources[0].end   = cs_mem_base + 0xff;
 	udelay(100);
 
 	eth_gpio = LDP_SMC911X_GPIO;
@@ -98,7 +101,7 @@ static inline void __init ldp_init_smc911x(void)
 
 static void __init omap_ldp_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	ldp_init_smc911x();
@@ -162,6 +165,7 @@ static void __init omap_ldp_init(void)
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
+	usb_musb_init();
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 38c88fbe658..744740ae1b9 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,6 +41,7 @@
 #include <mach/gpmc.h>
 #include <mach/nand.h>
 #include <mach/mux.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -175,16 +176,15 @@ static int __init omap3_beagle_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
 			ARRAY_SIZE(beagle_i2c_boardinfo));
-#ifdef CONFIG_I2C2_OMAP_BEAGLE
-	omap_register_i2c_bus(2, 400, NULL, 0);
-#endif
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 100, NULL, 0);
 	return 0;
 }
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -314,6 +314,7 @@ static void __init omap3_beagle_init(void)
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);
 
+	usb_musb_init();
 	omap3beagle_flash_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b3196107afd..402f09c6cf1 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -34,6 +34,7 @@
 #include <mach/gpio.h>
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -53,6 +54,13 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 127,
 		.ext_clock	= 1,
+		.transceiver	= true,
+	},
+	{
+		.mmc		= 3,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
 	},
 	{}	/* Terminator */
 };
@@ -110,7 +118,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -193,6 +201,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	usb_musb_init();
 }
 
 static void __init omap3pandora_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 82b3dc557c9..b3f6e9d8180 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -37,20 +37,85 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-overo.h>
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/gpio.h>
 #include <mach/gpmc.h>
 #include <mach/hardware.h>
 #include <mach/nand.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
+#define OVERO_GPIO_BT_XGATE	15
+#define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_BT_NRESET	164
+#define OVERO_GPIO_USBH_CPEN	168
+#define OVERO_GPIO_USBH_NRESET	183
+
 #define NAND_BLOCK_SIZE SZ_128K
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
 
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#include <mach/mcspi.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OVERO_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	}
+};
+
+static void __init overo_ads7846_init(void)
+{
+	if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+	    (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) {
+		gpio_export(OVERO_GPIO_PENDOWN, 0);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
+		return;
+	}
+
+	spi_register_board_info(overo_spi_board_info,
+			ARRAY_SIZE(overo_spi_board_info));
+}
+
+#else
+static inline void __init overo_ads7846_init(void) { return; }
+#endif
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -174,7 +239,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -209,6 +274,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 		.wires		= 4,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
+		.transceiver	= true,
 	},
 	{}	/* Terminator */
 };
@@ -222,6 +288,8 @@ static void __init overo_init(void)
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	overo_flash_init();
+	usb_musb_init();
+	overo_ads7846_init();
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
new file mode 100644
index 00000000000..a7381729645
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -0,0 +1,419 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ *
+ * Copyright (C) 2008-2009 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+#include <mach/keypad.h>
+
+#include "mmc-twl4030.h"
+
+
+#define SMC91X_CS			1
+#define SMC91X_GPIO_IRQ			54
+#define SMC91X_GPIO_RESET		164
+#define SMC91X_GPIO_PWRDWN		86
+
+static struct resource rx51_smc91x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device rx51_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),
+	.resource	= rx51_smc91x_resources,
+};
+
+static int rx51_keymap[] = {
+	KEY(0, 0, KEY_Q),
+	KEY(0, 1, KEY_W),
+	KEY(0, 2, KEY_E),
+	KEY(0, 3, KEY_R),
+	KEY(0, 4, KEY_T),
+	KEY(0, 5, KEY_Y),
+	KEY(0, 6, KEY_U),
+	KEY(0, 7, KEY_I),
+	KEY(1, 0, KEY_O),
+	KEY(1, 1, KEY_D),
+	KEY(1, 2, KEY_DOT),
+	KEY(1, 3, KEY_V),
+	KEY(1, 4, KEY_DOWN),
+	KEY(2, 0, KEY_P),
+	KEY(2, 1, KEY_F),
+	KEY(2, 2, KEY_UP),
+	KEY(2, 3, KEY_B),
+	KEY(2, 4, KEY_RIGHT),
+	KEY(3, 0, KEY_COMMA),
+	KEY(3, 1, KEY_G),
+	KEY(3, 2, KEY_ENTER),
+	KEY(3, 3, KEY_N),
+	KEY(4, 0, KEY_BACKSPACE),
+	KEY(4, 1, KEY_H),
+	KEY(4, 3, KEY_M),
+	KEY(4, 4, KEY_LEFTCTRL),
+	KEY(5, 1, KEY_J),
+	KEY(5, 2, KEY_Z),
+	KEY(5, 3, KEY_SPACE),
+	KEY(5, 4, KEY_LEFTSHIFT),
+	KEY(6, 0, KEY_A),
+	KEY(6, 1, KEY_K),
+	KEY(6, 2, KEY_X),
+	KEY(6, 3, KEY_SPACE),
+	KEY(6, 4, KEY_FN),
+	KEY(7, 0, KEY_S),
+	KEY(7, 1, KEY_L),
+	KEY(7, 2, KEY_C),
+	KEY(7, 3, KEY_LEFT),
+	KEY(0xff, 0, KEY_F6),
+	KEY(0xff, 1, KEY_F7),
+	KEY(0xff, 2, KEY_F8),
+	KEY(0xff, 4, KEY_F9),
+	KEY(0xff, 5, KEY_F10),
+};
+
+static struct twl4030_keypad_data rx51_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap		= rx51_keymap,
+	.keymapsize	= ARRAY_SIZE(rx51_keymap),
+	.rep		= 1,
+};
+
+static struct platform_device *rx51_peripherals_devices[] = {
+	&rx51_smc91x_device,
+};
+
+/*
+ * Timings are taken from smsc-lan91c96-ms.pdf
+ */
+static int smc91x_init_gpmc(int cs)
+{
+	struct gpmc_timings t;
+	const int t2_r = 45;		/* t2 in Figure 12.10 */
+	const int t2_w = 30;		/* t2 in Figure 12.11 */
+	const int t3 = 15;		/* t3 in Figure 12.10 */
+	const int t5_r = 0;		/* t5 in Figure 12.10 */
+	const int t6_r = 45;		/* t6 in Figure 12.10 */
+	const int t6_w = 0;		/* t6 in Figure 12.11 */
+	const int t7_w = 15;		/* t7 in Figure 12.11 */
+	const int t15 = 12;		/* t15 in Figure 12.2 */
+	const int t20 = 185;		/* t20 in Figure 12.2 */
+
+	memset(&t, 0, sizeof(t));
+
+	t.cs_on = t15;
+	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
+	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
+	t.adv_on = t3;			/* Figure 12.10 */
+	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */
+	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */
+	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
+	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */
+	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
+	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */
+	t.rd_cycle = t20;		/* Figure 12.2 */
+	t.wr_cycle = t20;		/* Figure 12.4 */
+	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */
+	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */
+
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
+
+	return gpmc_cs_set_timings(cs, &t);
+}
+
+static void __init rx51_init_smc91x(void)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+	omap_cfg_reg(G25_34XX_GPIO86_OUT);
+	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
+	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
+
+	smc91x_init_gpmc(SMC91X_CS);
+
+	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
+		goto free1;
+
+	gpio_direction_input(SMC91X_GPIO_IRQ);
+	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
+
+	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
+	if (ret)
+		goto free2;
+	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
+
+	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
+	if (ret)
+		goto free3;
+	gpio_direction_output(SMC91X_GPIO_RESET, 0);
+	gpio_set_value(SMC91X_GPIO_RESET, 1);
+	msleep(100);
+	gpio_set_value(SMC91X_GPIO_RESET, 0);
+
+	return;
+
+free3:
+	gpio_free(SMC91X_GPIO_PWRDWN);
+free2:
+	gpio_free(SMC91X_GPIO_IRQ);
+free1:
+	gpmc_cs_free(SMC91X_CS);
+
+	printk(KERN_ERR "Could not initialize smc91x\n");
+}
+
+static struct twl4030_madc_platform_data rx51_madc_data = {
+	.irq_line		= 1,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.name		= "external",
+		.mmc		= 1,
+		.wires		= 4,
+		.cover_only	= true,
+		.gpio_cd	= 160,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.name		= "internal",
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply rx51_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply rx51_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply rx51_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+static struct regulator_init_data rx51_vaux1 = {
+	.constraints = {
+		.name			= "V28",
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data rx51_vaux2 = {
+	.constraints = {
+		.name			= "VCSI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VAUX3 - adds more power to VIO_18 rail */
+static struct regulator_init_data rx51_vaux3 = {
+	.constraints = {
+		.name			= "VCAM_DIG_18",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data rx51_vaux4 = {
+	.constraints = {
+		.name			= "VCAM_ANA_28",
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data rx51_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc1_supply,
+};
+
+static struct regulator_init_data rx51_vmmc2 = {
+	.constraints = {
+		.name			= "VMMC2_30",
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc2_supply,
+};
+
+static struct regulator_init_data rx51_vsim = {
+	.constraints = {
+		.name			= "VMMC2_IO_18",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vsim_supply,
+};
+
+static struct regulator_init_data rx51_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
+{
+	/* FIXME this gpio setup is just a placeholder for now */
+	gpio_request(gpio + 6, "backlight_pwm");
+	gpio_direction_output(gpio + 6, 0);
+	gpio_request(gpio + 7, "speaker_en");
+	gpio_direction_output(gpio + 7, 1);
+
+	/* set up MMC adapters, linking their regulators to them */
+	twl4030_mmc_init(mmc);
+	rx51_vmmc1_supply.dev = mmc[0].dev;
+	rx51_vmmc2_supply.dev = mmc[1].dev;
+	rx51_vsim_supply.dev = mmc[1].dev;
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data rx51_gpio_data = {
+	.gpio_base		= OMAP_MAX_GPIO_LINES,
+	.irq_base		= TWL4030_GPIO_IRQ_BASE,
+	.irq_end		= TWL4030_GPIO_IRQ_END,
+	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
+				| BIT(4) | BIT(5)
+				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
+				| BIT(12) | BIT(13) | BIT(14) | BIT(15)
+				| BIT(16) | BIT(17) ,
+	.setup			= rx51_twlgpio_setup,
+};
+
+static struct twl4030_platform_data rx51_twldata = {
+	.irq_base		= TWL4030_IRQ_BASE,
+	.irq_end		= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio			= &rx51_gpio_data,
+	.keypad			= &rx51_kp_data,
+	.madc			= &rx51_madc_data,
+
+	.vaux1			= &rx51_vaux1,
+	.vaux2			= &rx51_vaux2,
+	.vaux3			= &rx51_vaux3,
+	.vaux4			= &rx51_vaux4,
+	.vmmc1			= &rx51_vmmc1,
+	.vmmc2			= &rx51_vmmc2,
+	.vsim			= &rx51_vsim,
+	.vdac			= &rx51_vdac,
+};
+
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
+	{
+		I2C_BOARD_INFO("twl5030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &rx51_twldata,
+	},
+};
+
+static int __init rx51_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+	omap_register_i2c_bus(2, 100, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+
+void __init rx51_peripherals_init(void)
+{
+	platform_add_devices(rx51_peripherals_devices,
+				ARRAY_SIZE(rx51_peripherals_devices));
+	rx51_i2c_init();
+	rx51_init_smc91x();
+}
+
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
new file mode 100644
index 00000000000..3a0daac6c83
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51.c
+ *
+ * Copyright (C) 2007, 2008 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+#include <mach/usb.h>
+
+static struct omap_uart_config rx51_uart_config = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config rx51_lcd_config = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_fbmem_config rx51_fbmem0_config = {
+	.size = 752 * 1024,
+};
+
+static struct omap_fbmem_config rx51_fbmem1_config = {
+	.size = 752 * 1024,
+};
+
+static struct omap_fbmem_config rx51_fbmem2_config = {
+	.size = 752 * 1024,
+};
+
+static struct omap_board_config_kernel rx51_config[] = {
+	{ OMAP_TAG_UART,	&rx51_uart_config },
+	{ OMAP_TAG_FBMEM,	&rx51_fbmem0_config },
+	{ OMAP_TAG_FBMEM,	&rx51_fbmem1_config },
+	{ OMAP_TAG_FBMEM,	&rx51_fbmem2_config },
+	{ OMAP_TAG_LCD,		&rx51_lcd_config },
+};
+
+static void __init rx51_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+extern void __init rx51_peripherals_init(void);
+
+static void __init rx51_init(void)
+{
+	omap_board_config = rx51_config;
+	omap_board_config_size = ARRAY_SIZE(rx51_config);
+	omap_serial_init();
+	usb_musb_init();
+	rx51_peripherals_init();
+}
+
+static void __init rx51_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
+	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= rx51_map_io,
+	.init_irq	= rx51_init_irq,
+	.init_machine	= rx51_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ce4d46a4a83..4247a153441 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -26,11 +26,10 @@
 
 #include <mach/clock.h>
 #include <mach/clockdomain.h>
-#include <mach/sram.h>
 #include <mach/cpu.h>
 #include <asm/div64.h>
 
-#include "memory.h"
+#include <mach/sdrc.h>
 #include "sdrc.h"
 #include "clock.h"
 #include "prm.h"
@@ -46,7 +45,7 @@
 #define DPLL_MIN_DIVIDER		1
 
 /* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW		(1 << 0)
+#define DPLL_MULT_UNDERFLOW		-1
 
 /*
  * Scale factor to mitigate roundoff errors in DPLL rate rounding.
@@ -59,6 +58,16 @@
 #define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
 					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
 
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define DPLL_FINT_BAND1_MIN		750000
+#define DPLL_FINT_BAND1_MAX		2100000
+#define DPLL_FINT_BAND2_MIN		7500000
+#define DPLL_FINT_BAND2_MAX		21000000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW		-1
+#define DPLL_FINT_INVALID		-2
+
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
@@ -66,6 +75,74 @@ u8 cpu_mask;
  *-------------------------------------------------------------------------*/
 
 /**
+ * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
+ * @clk: struct clk *
+ *
+ * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
+ * don't take effect until the VALID_CONFIG bit is written, write the
+ * VALID_CONFIG bit and wait for the write to complete.  No return value.
+ */
+static void _omap2xxx_clk_commit(struct clk *clk)
+{
+	if (!cpu_is_omap24xx())
+		return;
+
+	if (!(clk->flags & DELAYED_APP))
+		return;
+
+	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
+		OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+	/* OCP barrier */
+	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+}
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk *clk, u8 n)
+{
+	struct dpll_data *dd;
+	long fint;
+	int ret = 0;
+
+	dd = clk->dpll_data;
+
+	/* DPLL divider must result in a valid jitter correction val */
+	fint = clk->parent->rate / (n + 1);
+	if (fint < DPLL_FINT_BAND1_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "lowering max_divider\n", n);
+		dd->max_divider = n;
+		ret = DPLL_FINT_UNDERFLOW;
+
+	} else if (fint > DPLL_FINT_BAND1_MAX &&
+		   fint < DPLL_FINT_BAND2_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure\n", n);
+		ret = DPLL_FINT_INVALID;
+
+	} else if (fint > DPLL_FINT_BAND2_MAX) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "boosting min_divider\n", n);
+		dd->min_divider = n;
+		ret = DPLL_FINT_INVALID;
+
+	}
+
+	return ret;
+}
+
+/**
  * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
  * @clk: OMAP clock struct ptr to use
  *
@@ -120,7 +197,7 @@ void omap2_init_clksel_parent(struct clk *clk)
 						 clk->name, clks->parent->name,
 						 ((clk->parent) ?
 						  clk->parent->name : "NULL"));
-					clk->parent = clks->parent;
+					clk_reparent(clk, clks->parent);
 				};
 				found = 1;
 			}
@@ -134,25 +211,52 @@ void omap2_init_clksel_parent(struct clk *clk)
 	return;
 }
 
-/* Returns the DPLL rate */
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values.  When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
 u32 omap2_get_dpll_rate(struct clk *clk)
 {
 	long long dpll_clk;
-	u32 dpll_mult, dpll_div, dpll;
+	u32 dpll_mult, dpll_div, v;
 	struct dpll_data *dd;
 
 	dd = clk->dpll_data;
-	/* REVISIT: What do we return on error? */
 	if (!dd)
 		return 0;
 
-	dpll = __raw_readl(dd->mult_div1_reg);
-	dpll_mult = dpll & dd->mult_mask;
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	}
+
+	v = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = v & dd->mult_mask;
 	dpll_mult >>= __ffs(dd->mult_mask);
-	dpll_div = dpll & dd->div1_mask;
+	dpll_div = v & dd->div1_mask;
 	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_clk = (long long)clk->parent->rate * dpll_mult;
+	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
 
 	return dpll_clk;
@@ -162,14 +266,11 @@ u32 omap2_get_dpll_rate(struct clk *clk)
  * Used for clocks that have the same value as the parent clock,
  * divided by some factor
  */
-void omap2_fixed_divisor_recalc(struct clk *clk)
+unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
 {
 	WARN_ON(!clk->fixed_div);
 
-	clk->rate = clk->parent->rate / clk->fixed_div;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
+	return clk->parent->rate / clk->fixed_div;
 }
 
 /**
@@ -190,11 +291,10 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
 	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
 	 * 34xx reverses this, just to keep us on our toes
 	 */
-	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
 		ena = mask;
-	} else if (cpu_mask & RATE_IN_343X) {
+	else if (cpu_mask & RATE_IN_343X)
 		ena = 0;
-	}
 
 	/* Wait for lock */
 	while (((__raw_readl(reg) & mask) != ena) &&
@@ -228,31 +328,12 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	 * it and pull it into struct clk itself somehow.
 	 */
 	reg = clk->enable_reg;
-	if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
-	    (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
-		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
-	else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
-		 (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
-		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
-	else
-		return;
 
-	/* REVISIT: What are the appropriate exclusions for 34XX? */
-	/* No check for DSS or cam clocks */
-	if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
-		if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
-		    clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
-		    clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
-			return;
-	}
-
-	/* REVISIT: What are the appropriate exclusions for 34XX? */
-	/* OMAP3: ignore DSS-mod clocks */
-	if (cpu_is_omap34xx() &&
-	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
-	     ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
-	     clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
-		return;
+	/*
+	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
+	 * it's just a matter of XORing the bits.
+	 */
+	other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
 
 	/* Check if both functional and interface clocks
 	 * are running. */
@@ -264,18 +345,9 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	omap2_wait_clock_ready(st_reg, bit, clk->name);
 }
 
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
- */
-int _omap2_clk_enable(struct clk *clk)
+static int omap2_dflt_clk_enable(struct clk *clk)
 {
-	u32 regval32;
-
-	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
-		return 0;
-
-	if (clk->enable)
-		return clk->enable(clk);
+	u32 v;
 
 	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
@@ -283,33 +355,38 @@ int _omap2_clk_enable(struct clk *clk)
 		return 0; /* REVISIT: -EINVAL */
 	}
 
-	regval32 = __raw_readl(clk->enable_reg);
+	v = __raw_readl(clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
-		regval32 &= ~(1 << clk->enable_bit);
+		v &= ~(1 << clk->enable_bit);
 	else
-		regval32 |= (1 << clk->enable_bit);
-	__raw_writel(regval32, clk->enable_reg);
-	wmb();
-
-	omap2_clk_wait_ready(clk);
+		v |= (1 << clk->enable_bit);
+	__raw_writel(v, clk->enable_reg);
+	v = __raw_readl(clk->enable_reg); /* OCP barrier */
 
 	return 0;
 }
 
-/* Disables clock without considering parent dependencies or use count */
-void _omap2_clk_disable(struct clk *clk)
+static int omap2_dflt_clk_enable_wait(struct clk *clk)
 {
-	u32 regval32;
-
-	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
-		return;
+	int ret;
 
-	if (clk->disable) {
-		clk->disable(clk);
-		return;
+	if (!clk->enable_reg) {
+		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		       clk->name);
+		return 0; /* REVISIT: -EINVAL */
 	}
 
-	if (clk->enable_reg == NULL) {
+	ret = omap2_dflt_clk_enable(clk);
+	if (ret == 0)
+		omap2_clk_wait_ready(clk);
+	return ret;
+}
+
+static void omap2_dflt_clk_disable(struct clk *clk)
+{
+	u32 v;
+
+	if (!clk->enable_reg) {
 		/*
 		 * 'Independent' here refers to a clock which is not
 		 * controlled by its parent.
@@ -319,20 +396,44 @@ void _omap2_clk_disable(struct clk *clk)
 		return;
 	}
 
-	regval32 = __raw_readl(clk->enable_reg);
+	v = __raw_readl(clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
-		regval32 |= (1 << clk->enable_bit);
+		v |= (1 << clk->enable_bit);
 	else
-		regval32 &= ~(1 << clk->enable_bit);
-	__raw_writel(regval32, clk->enable_reg);
-	wmb();
+		v &= ~(1 << clk->enable_bit);
+	__raw_writel(v, clk->enable_reg);
+	/* No OCP barrier needed here since it is a disable operation */
+}
+
+const struct clkops clkops_omap2_dflt_wait = {
+	.enable		= omap2_dflt_clk_enable_wait,
+	.disable	= omap2_dflt_clk_disable,
+};
+
+const struct clkops clkops_omap2_dflt = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+};
+
+/* Enables clock without considering parent dependencies or use count
+ * REVISIT: Maybe change this to use clk->enable like on omap1?
+ */
+static int _omap2_clk_enable(struct clk *clk)
+{
+	return clk->ops->enable(clk);
+}
+
+/* Disables clock without considering parent dependencies or use count */
+static void _omap2_clk_disable(struct clk *clk)
+{
+	clk->ops->disable(clk);
 }
 
 void omap2_clk_disable(struct clk *clk)
 {
 	if (clk->usecount > 0 && !(--clk->usecount)) {
 		_omap2_clk_disable(clk);
-		if (likely((u32)clk->parent))
+		if (clk->parent)
 			omap2_clk_disable(clk->parent);
 		if (clk->clkdm)
 			omap2_clkdm_clk_disable(clk->clkdm, clk);
@@ -345,30 +446,29 @@ int omap2_clk_enable(struct clk *clk)
 	int ret = 0;
 
 	if (clk->usecount++ == 0) {
-		if (likely((u32)clk->parent))
-			ret = omap2_clk_enable(clk->parent);
-
-		if (unlikely(ret != 0)) {
-			clk->usecount--;
-			return ret;
-		}
-
 		if (clk->clkdm)
 			omap2_clkdm_clk_enable(clk->clkdm, clk);
 
-		ret = _omap2_clk_enable(clk);
-
-		if (unlikely(ret != 0)) {
-			if (clk->clkdm)
-				omap2_clkdm_clk_disable(clk->clkdm, clk);
+		if (clk->parent) {
+			ret = omap2_clk_enable(clk->parent);
+			if (ret)
+				goto err;
+		}
 
-			if (clk->parent) {
+		ret = _omap2_clk_enable(clk);
+		if (ret) {
+			if (clk->parent)
 				omap2_clk_disable(clk->parent);
-				clk->usecount--;
-			}
+
+			goto err;
 		}
 	}
+	return ret;
 
+err:
+	if (clk->clkdm)
+		omap2_clkdm_clk_disable(clk->clkdm, clk);
+	clk->usecount--;
 	return ret;
 }
 
@@ -376,24 +476,22 @@ int omap2_clk_enable(struct clk *clk)
  * Used for clocks that are part of CLKSEL_xyz governed clocks.
  * REVISIT: Maybe change to use clk->enable() functions like on omap1?
  */
-void omap2_clksel_recalc(struct clk *clk)
+unsigned long omap2_clksel_recalc(struct clk *clk)
 {
+	unsigned long rate;
 	u32 div = 0;
 
 	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
 
 	div = omap2_clksel_get_divisor(clk);
 	if (div == 0)
-		return;
+		return clk->rate;
 
-	if (unlikely(clk->rate == clk->parent->rate / div))
-		return;
-	clk->rate = clk->parent->rate / div;
+	rate = clk->parent->rate / div;
 
-	pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
+	pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
 
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
+	return rate;
 }
 
 /**
@@ -405,8 +503,8 @@ void omap2_clksel_recalc(struct clk *clk)
  * the element associated with the supplied parent clock address.
  * Returns a pointer to the struct clksel on success or NULL on error.
  */
-const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
-						struct clk *src_clk)
+static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+						       struct clk *src_clk)
 {
 	const struct clksel *clks;
 
@@ -455,7 +553,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	*new_div = 1;
 
 	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (clks == NULL)
+	if (!clks)
 		return ~0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
@@ -514,7 +612,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
 /* Given a clock and a rate apply a clock specific rounding function */
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (clk->round_rate != NULL)
+	if (clk->round_rate)
 		return clk->round_rate(clk, rate);
 
 	if (clk->flags & RATE_FIXED)
@@ -540,7 +638,7 @@ u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
 	const struct clksel_rate *clkr;
 
 	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (clks == NULL)
+	if (!clks)
 		return 0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
@@ -576,7 +674,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 	WARN_ON(div == 0);
 
 	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (clks == NULL)
+	if (!clks)
 		return ~0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
@@ -595,23 +693,6 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 }
 
 /**
- * omap2_get_clksel - find clksel register addr & field mask for a clk
- * @clk: struct clk to use
- * @field_mask: ptr to u32 to store the register field mask
- *
- * Returns the address of the clksel register upon success or NULL on error.
- */
-void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
-{
-	if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL)))
-		return NULL;
-
-	*field_mask = clk->clksel_mask;
-
-	return clk->clksel_reg;
-}
-
-/**
  * omap2_clksel_get_divisor - get current divider applied to parent clock.
  * @clk: OMAP struct clk to use.
  *
@@ -619,49 +700,41 @@ void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
  */
 u32 omap2_clksel_get_divisor(struct clk *clk)
 {
-	u32 field_mask, field_val;
-	void __iomem *div_addr;
+	u32 v;
 
-	div_addr = omap2_get_clksel(clk, &field_mask);
-	if (div_addr == NULL)
+	if (!clk->clksel_mask)
 		return 0;
 
-	field_val = __raw_readl(div_addr) & field_mask;
-	field_val >>= __ffs(field_mask);
+	v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	v >>= __ffs(clk->clksel_mask);
 
-	return omap2_clksel_to_divisor(clk, field_val);
+	return omap2_clksel_to_divisor(clk, v);
 }
 
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 field_mask, field_val, reg_val, validrate, new_div = 0;
-	void __iomem *div_addr;
+	u32 v, field_val, validrate, new_div = 0;
 
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
+	if (!clk->clksel_mask)
 		return -EINVAL;
 
-	div_addr = omap2_get_clksel(clk, &field_mask);
-	if (div_addr == NULL)
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
 		return -EINVAL;
 
 	field_val = omap2_divisor_to_clksel(clk, new_div);
 	if (field_val == ~0)
 		return -EINVAL;
 
-	reg_val = __raw_readl(div_addr);
-	reg_val &= ~field_mask;
-	reg_val |= (field_val << __ffs(field_mask));
-	__raw_writel(reg_val, div_addr);
-	wmb();
+	v = __raw_readl(clk->clksel_reg);
+	v &= ~clk->clksel_mask;
+	v |= field_val << __ffs(clk->clksel_mask);
+	__raw_writel(v, clk->clksel_reg);
+	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
 
 	clk->rate = clk->parent->rate / new_div;
 
-	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
-		prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
-			OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
-		wmb();
-	}
+	_omap2xxx_clk_commit(clk);
 
 	return 0;
 }
@@ -680,31 +753,24 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
-	if (clk->set_rate != NULL)
+	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
 
-	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
-		propagate_rate(clk);
-
 	return ret;
 }
 
 /*
  * Converts encoded control register address into a full address
- * On error, *src_addr will be returned as 0.
+ * On error, the return value (parent_div) will be 0.
  */
-static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
-				      struct clk *src_clk, u32 *field_mask,
-				      struct clk *clk, u32 *parent_div)
+static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
+				       u32 *field_val)
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
 
-	*parent_div = 0;
-	*src_addr = NULL;
-
 	clks = omap2_get_clksel_by_parent(clk, src_clk);
-	if (clks == NULL)
+	if (!clks)
 		return 0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
@@ -722,47 +788,35 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
 	/* Should never happen.  Add a clksel mask to the struct clk. */
 	WARN_ON(clk->clksel_mask == 0);
 
-	*field_mask = clk->clksel_mask;
-	*src_addr = clk->clksel_reg;
-	*parent_div = clkr->div;
+	*field_val = clkr->val;
 
-	return clkr->val;
+	return clkr->div;
 }
 
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	void __iomem *src_addr;
-	u32 field_val, field_mask, reg_val, parent_div;
+	u32 field_val, v, parent_div;
 
-	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
+	if (clk->flags & CONFIG_PARTICIPANT)
 		return -EINVAL;
 
 	if (!clk->clksel)
 		return -EINVAL;
 
-	field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
-					       &field_mask, clk, &parent_div);
-	if (src_addr == NULL)
+	parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+	if (!parent_div)
 		return -EINVAL;
 
-	if (clk->usecount > 0)
-		omap2_clk_disable(clk);
-
 	/* Set new source value (previous dividers if any in effect) */
-	reg_val = __raw_readl(src_addr) & ~field_mask;
-	reg_val |= (field_val << __ffs(field_mask));
-	__raw_writel(reg_val, src_addr);
-	wmb();
-
-	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
-		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
-		wmb();
-	}
+	v = __raw_readl(clk->clksel_reg);
+	v &= ~clk->clksel_mask;
+	v |= field_val << __ffs(clk->clksel_mask);
+	__raw_writel(v, clk->clksel_reg);
+	v = __raw_readl(clk->clksel_reg);    /* OCP barrier */
 
-	clk->parent = new_parent;
+	_omap2xxx_clk_commit(clk);
 
-	if (clk->usecount > 0)
-		omap2_clk_enable(clk);
+	clk_reparent(clk, new_parent);
 
 	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
 	clk->rate = new_parent->rate;
@@ -773,9 +827,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
 		 clk->name, clk->parent->name, clk->rate);
 
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
-
 	return 0;
 }
 
@@ -805,7 +856,8 @@ int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
 	return 0;
 }
 
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+					    unsigned int m, unsigned int n)
 {
 	unsigned long long num;
 
@@ -838,7 +890,7 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
 			   unsigned long target_rate,
 			   unsigned long parent_rate)
 {
-	int flags = 0, carry = 0;
+	int r = 0, carry = 0;
 
 	/* Unscale m and round if necessary */
 	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
@@ -859,13 +911,13 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
 	if (*m < DPLL_MIN_MULTIPLIER) {
 		*m = DPLL_MIN_MULTIPLIER;
 		*new_rate = 0;
-		flags = DPLL_MULT_UNDERFLOW;
+		r = DPLL_MULT_UNDERFLOW;
 	}
 
 	if (*new_rate == 0)
 		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
 
-	return flags;
+	return r;
 }
 
 /**
@@ -889,54 +941,65 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	int m, n, r, e, scaled_max_m;
 	unsigned long scaled_rt_rp, new_rate;
 	int min_e = -1, min_e_m = -1, min_e_n = -1;
+	struct dpll_data *dd;
 
 	if (!clk || !clk->dpll_data)
 		return ~0;
 
+	dd = clk->dpll_data;
+
 	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
 		 "%ld\n", clk->name, target_rate);
 
-	scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
-	scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
 
-	clk->dpll_data->last_rounded_rate = 0;
+	dd->last_rounded_rate = 0;
 
-	for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+	for (n = dd->min_divider; n <= dd->max_divider; n++) {
+
+		/* Is the (input clk, divider) pair valid for the DPLL? */
+		r = _dpll_test_fint(clk, n);
+		if (r == DPLL_FINT_UNDERFLOW)
+			break;
+		else if (r == DPLL_FINT_INVALID)
+			continue;
 
 		/* Compute the scaled DPLL multiplier, based on the divider */
 		m = scaled_rt_rp * n;
 
 		/*
-		 * Since we're counting n down, a m overflow means we can
-		 * can immediately skip to the next n
+		 * Since we're counting n up, a m overflow means we
+		 * can bail out completely (since as n increases in
+		 * the next iteration, there's no way that m can
+		 * increase beyond the current m)
 		 */
 		if (m > scaled_max_m)
-			continue;
+			break;
 
 		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    clk->parent->rate);
+				    dd->clk_ref->rate);
+
+		/* m can't be set low enough for this n - try with a larger n */
+		if (r == DPLL_MULT_UNDERFLOW)
+			continue;
 
 		e = target_rate - new_rate;
 		pr_debug("clock: n = %d: m = %d: rate error is %d "
 			 "(new_rate = %ld)\n", n, m, e, new_rate);
 
 		if (min_e == -1 ||
-		    min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
 			min_e = e;
 			min_e_m = m;
 			min_e_n = n;
 
 			pr_debug("clock: found new least error %d\n", min_e);
-		}
 
-		/*
-		 * Since we're counting n down, a m underflow means we
-		 * can bail out completely (since as n decreases in
-		 * the next iteration, there's no way that m can
-		 * increase beyond the current m)
-		 */
-		if (r & DPLL_MULT_UNDERFLOW)
-			break;
+			/* We found good settings -- bail out now */
+			if (min_e <= dd->rate_tolerance)
+				break;
+		}
 	}
 
 	if (min_e < 0) {
@@ -944,17 +1007,17 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 		return ~0;
 	}
 
-	clk->dpll_data->last_rounded_m = min_e_m;
-	clk->dpll_data->last_rounded_n = min_e_n;
-	clk->dpll_data->last_rounded_rate =
-		_dpll_compute_new_rate(clk->parent->rate, min_e_m,  min_e_n);
+	dd->last_rounded_m = min_e_m;
+	dd->last_rounded_n = min_e_n;
+	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
+						       min_e_m,  min_e_n);
 
 	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
 		 min_e, min_e_m, min_e_n);
 	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
-		 clk->dpll_data->last_rounded_rate, target_rate);
+		 dd->last_rounded_rate, target_rate);
 
-	return clk->dpll_data->last_rounded_rate;
+	return dd->last_rounded_rate;
 }
 
 /*-------------------------------------------------------------------------
@@ -973,6 +1036,10 @@ void omap2_clk_disable_unused(struct clk *clk)
 		return;
 
 	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
-	_omap2_clk_disable(clk);
+	if (cpu_is_omap34xx()) {
+		omap2_clk_enable(clk);
+		omap2_clk_disable(clk);
+	} else
+		_omap2_clk_disable(clk);
 }
 #endif
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1fb330e0847..2679ddfa642 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,13 +21,28 @@
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
 
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
+#define CORE_CLK_SRC_32K		0x0
+#define CORE_CLK_SRC_DPLL		0x1
+#define CORE_CLK_SRC_DPLL_X2		0x2
+
+/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP2XXX_EN_DPLL_LPBYPASS		0x1
+#define OMAP2XXX_EN_DPLL_FRBYPASS		0x2
+#define OMAP2XXX_EN_DPLL_LOCKED			0x3
+
+/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP3XXX_EN_DPLL_LPBYPASS		0x5
+#define OMAP3XXX_EN_DPLL_FRBYPASS		0x6
+#define OMAP3XXX_EN_DPLL_LOCKED			0x7
+
 int omap2_clk_init(void);
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
-int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
 long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
@@ -36,7 +51,7 @@ void omap2_clk_disable_unused(struct clk *clk);
 #define omap2_clk_disable_unused	NULL
 #endif
 
-void omap2_clksel_recalc(struct clk *clk);
+unsigned long omap2_clksel_recalc(struct clk *clk);
 void omap2_init_clk_clkdm(struct clk *clk);
 void omap2_init_clksel_parent(struct clk *clk);
 u32 omap2_clksel_get_divisor(struct clk *clk);
@@ -44,13 +59,16 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 				u32 *new_div);
 u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
 u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
-void omap2_fixed_divisor_recalc(struct clk *clk);
+unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
 long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 void omap2_clk_prepare_for_reboot(void);
 
+extern const struct clkops clkops_omap2_dflt_wait;
+extern const struct clkops clkops_omap2_dflt;
+
 extern u8 cpu_mask;
 
 /* clksel_rate data common to 24xx/343x */
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index d382eb0184a..1e839c5a28c 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -31,15 +31,192 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
+#include <asm/clkdev.h>
 
-#include "memory.h"
+#include <mach/sdrc.h>
 #include "clock.h"
-#include "clock24xx.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "cm.h"
 #include "cm-regbits-24xx.h"
 
+static const struct clkops clkops_oscck;
+static const struct clkops clkops_fixed;
+
+#include "clock24xx.h"
+
+struct omap_clk {
+	u32		cpu;
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+#define CK_243X	(1 << 0)
+#define CK_242X	(1 << 1)
+
+static struct omap_clk omap24xx_clks[] = {
+	/* external root sources */
+	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X | CK_242X),
+	/* internal analog sources */
+	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X | CK_242X),
+	/* internal prcm root sources */
+	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
+	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
+	/* mpu domain clocks */
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X | CK_242X),
+	/* dsp domain clocks */
+	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
+	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
+	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
+	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
+	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+	/* GFX domain clocks */
+	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X | CK_242X),
+	/* Modem domain clocks */
+	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
+	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
+	/* DSS domain clocks */
+	CLK(NULL,	"dss_ick",	&dss_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	/* L3 domain clocks */
+	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X | CK_242X),
+	/* L4 domain clocks */
+	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X | CK_242X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X | CK_242X),
+	/* virtual meta-group clock */
+	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+	/* general l4 interface ck, multi-parent functional clk */
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X | CK_242X),
+	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X | CK_242X),
+	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
+	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X | CK_242X),
+	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X | CK_242X),
+	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
+	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X | CK_242X),
+	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
+	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
+	CLK(NULL,	"des_ick",	&des_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X | CK_242X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
+	CLK("mmci-omap-hs.1", "fck",	&mmchs2_fck,	CK_243X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
+	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
+	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "mmchsdb_fck", 	&mmchsdb2_fck,	CK_243X),
+};
+
 /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
 #define EN_APLL_STOPPED			0
 #define EN_APLL_LOCKED			3
@@ -59,19 +236,32 @@ static struct clk *sclk;
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
 
-/* This actually returns the rate of core_ck, not dpll_ck. */
-static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual).  This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
 {
-	long long dpll_clk;
-	u8 amult;
+	long long core_clk;
+	u32 v;
+
+	core_clk = omap2_get_dpll_rate(clk);
 
-	dpll_clk = omap2_get_dpll_rate(tclk);
+	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
 
-	amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	amult &= OMAP24XX_CORE_CLK_SRC_MASK;
-	dpll_clk *= amult;
+	if (v == CORE_CLK_SRC_32K)
+		core_clk = 32768;
+	else
+		core_clk *= v;
 
-	return dpll_clk;
+	return core_clk;
 }
 
 static int omap2_enable_osc_ck(struct clk *clk)
@@ -96,6 +286,11 @@ static void omap2_disable_osc_ck(struct clk *clk)
 		      OMAP24XX_PRCM_CLKSRC_CTRL);
 }
 
+static const struct clkops clkops_oscck = {
+	.enable		= &omap2_enable_osc_ck,
+	.disable	= &omap2_disable_osc_ck,
+};
+
 #ifdef OLD_CK
 /* Recalculate SYST_CLK */
 static void omap2_sys_clk_recalc(struct clk * clk)
@@ -149,11 +344,16 @@ static void omap2_clk_fixed_disable(struct clk *clk)
 	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
 }
 
+static const struct clkops clkops_fixed = {
+	.enable		= &omap2_clk_fixed_enable,
+	.disable	= &omap2_clk_fixed_disable,
+};
+
 /*
  * Uses the current prcm set to tell if a rate is valid.
  * You can go slower, but not faster within a given rate set.
  */
-long omap2_dpllcore_round_rate(unsigned long target_rate)
+static long omap2_dpllcore_round_rate(unsigned long target_rate)
 {
 	u32 high, low, core_clk_src;
 
@@ -182,11 +382,9 @@ long omap2_dpllcore_round_rate(unsigned long target_rate)
 
 }
 
-static void omap2_dpllcore_recalc(struct clk *clk)
+static unsigned long omap2_dpllcore_recalc(struct clk *clk)
 {
-	clk->rate = omap2_get_dpll_rate_24xx(clk);
-
-	propagate_rate(clk);
+	return omap2xxx_clk_get_core_rate(clk);
 }
 
 static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
@@ -195,22 +393,19 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	u32 bypass = 0;
 	struct prcm_config tmpset;
 	const struct dpll_data *dd;
-	unsigned long flags;
-	int ret = -EINVAL;
 
-	local_irq_save(flags);
-	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
 	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
 
 	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
 	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
 	} else if (rate != cur_rate) {
 		valid_rate = omap2_dpllcore_round_rate(rate);
 		if (valid_rate != rate)
-			goto dpll_exit;
+			return -EINVAL;
 
 		if (mult == 1)
 			low = curr_prcm_set->dpll_speed;
@@ -219,7 +414,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 
 		dd = clk->dpll_data;
 		if (!dd)
-			goto dpll_exit;
+			return -EINVAL;
 
 		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
@@ -245,22 +440,19 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
 			bypass = 1;
 
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
+		/* For omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
 
 		/* Force dll lock mode */
 		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
 			       bypass);
 
 		/* Errata: ret dll entry state */
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
 	}
-	omap2_dpllcore_recalc(&dpll_ck);
-	ret = 0;
 
-dpll_exit:
-	local_irq_restore(flags);
-	return(ret);
+	return 0;
 }
 
 /**
@@ -269,9 +461,9 @@ dpll_exit:
  *
  * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
  */
-static void omap2_table_mpu_recalc(struct clk *clk)
+static unsigned long omap2_table_mpu_recalc(struct clk *clk)
 {
-	clk->rate = curr_prcm_set->mpu_speed;
+	return curr_prcm_set->mpu_speed;
 }
 
 /*
@@ -337,12 +529,12 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	}
 
 	curr_prcm_set = prcm;
-	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
 
 	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
 	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
 	} else if (prcm->dpll_speed != cur_rate) {
 		local_irq_save(flags);
 
@@ -366,27 +558,67 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 		/* Major subsystem dividers */
 		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+				 CM_CLKSEL1);
+
 		if (cpu_is_omap2430())
 			cm_write_mod_reg(prcm->cm_clksel_mdm,
 					 OMAP2430_MDM_MOD, CM_CLKSEL);
 
-		/* x2 to enter init_mem */
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+		/* x2 to enter omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
 
 		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
 			       bypass);
 
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
 
 		local_irq_restore(flags);
 	}
-	omap2_dpllcore_recalc(&dpll_ck);
 
 	return 0;
 }
 
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ */
+static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	struct prcm_config *prcm;
+	int i = 0;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
+	if (i == 0) {
+		printk(KERN_WARNING "%s: failed to initialize frequency "
+		       "table\n", __func__);
+		return;
+	}
+
+	freq_table[i].index = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	*table = &freq_table[0];
+}
+#endif
+
 static struct clk_functions omap2_clk_functions = {
 	.clk_enable		= omap2_clk_enable,
 	.clk_disable		= omap2_clk_disable,
@@ -394,24 +626,27 @@ static struct clk_functions omap2_clk_functions = {
 	.clk_set_rate		= omap2_clk_set_rate,
 	.clk_set_parent		= omap2_clk_set_parent,
 	.clk_disable_unused	= omap2_clk_disable_unused,
+#ifdef	CONFIG_CPU_FREQ
+	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+#endif
 };
 
 static u32 omap2_get_apll_clkin(void)
 {
-	u32 aplls, sclk = 0;
+	u32 aplls, srate = 0;
 
 	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
 	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
 	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
 
 	if (aplls == APLLS_CLKIN_19_2MHZ)
-		sclk = 19200000;
+		srate = 19200000;
 	else if (aplls == APLLS_CLKIN_13MHZ)
-		sclk = 13000000;
+		srate = 13000000;
 	else if (aplls == APLLS_CLKIN_12MHZ)
-		sclk = 12000000;
+		srate = 12000000;
 
-	return sclk;
+	return srate;
 }
 
 static u32 omap2_get_sysclkdiv(void)
@@ -425,16 +660,14 @@ static u32 omap2_get_sysclkdiv(void)
 	return div;
 }
 
-static void omap2_osc_clk_recalc(struct clk *clk)
+static unsigned long omap2_osc_clk_recalc(struct clk *clk)
 {
-	clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
-	propagate_rate(clk);
+	return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
 }
 
-static void omap2_sys_clk_recalc(struct clk *clk)
+static unsigned long omap2_sys_clk_recalc(struct clk *clk)
 {
-	clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
-	propagate_rate(clk);
+	return clk->parent->rate / omap2_get_sysclkdiv();
 }
 
 /*
@@ -460,7 +693,7 @@ static int __init omap2_clk_arch_init(void)
 	if (!mpurate)
 		return -EINVAL;
 
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+	if (clk_set_rate(&virt_prcm_set, mpurate))
 		printk(KERN_ERR "Could not find matching MPU rate\n");
 
 	recalculate_root_clocks();
@@ -477,8 +710,8 @@ arch_initcall(omap2_clk_arch_init);
 int __init omap2_clk_init(void)
 {
 	struct prcm_config *prcm;
-	struct clk **clkp;
-	u32 clkrate;
+	struct omap_clk *c;
+	u32 clkrate, cpu_mask;
 
 	if (cpu_is_omap242x())
 		cpu_mask = RATE_IN_242X;
@@ -487,26 +720,28 @@ int __init omap2_clk_init(void)
 
 	clk_init(&omap2_clk_functions);
 
-	omap2_osc_clk_recalc(&osc_ck);
-	omap2_sys_clk_recalc(&sys_ck);
+	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+	propagate_rate(&osc_ck);
+	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
+	propagate_rate(&sys_ck);
 
-	for (clkp = onchip_24xx_clks;
-	     clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
-	     clkp++) {
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		clk_init_one(c->lk.clk);
 
-		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
-			clk_register(*clkp);
-			continue;
-		}
+	cpu_mask = 0;
+	if (cpu_is_omap2420())
+		cpu_mask |= CK_242X;
+	if (cpu_is_omap2430())
+		cpu_mask |= CK_243X;
 
-		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
-			clk_register(*clkp);
-			continue;
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		if (c->cpu & cpu_mask) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
 		}
-	}
 
 	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index ad6d98d177c..33c3e5b1432 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,17 +24,13 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
-static void omap2_table_mpu_recalc(struct clk *clk);
+static unsigned long omap2_table_mpu_recalc(struct clk *clk);
 static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_osc_clk_recalc(struct clk *clk);
-static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_dpllcore_recalc(struct clk *clk);
-static int omap2_clk_fixed_enable(struct clk *clk);
-static void omap2_clk_fixed_disable(struct clk *clk);
-static int omap2_enable_osc_ck(struct clk *clk);
-static void omap2_disable_osc_ck(struct clk *clk);
+static unsigned long omap2_sys_clk_recalc(struct clk *clk);
+static unsigned long omap2_osc_clk_recalc(struct clk *clk);
+static unsigned long omap2_sys_clk_recalc(struct clk *clk);
+static unsigned long omap2_dpllcore_recalc(struct clk *clk);
 static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 
 /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
@@ -623,41 +619,35 @@ static struct prcm_config rate_table[] = {
 /* Base external input clocks */
 static struct clk func_32k_ck = {
 	.name		= "func_32k_ck",
+	.ops		= &clkops_null,
 	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &propagate_rate,
 };
 
 /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
 static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
 	.name		= "osc_ck",
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.ops		= &clkops_oscck,
 	.clkdm_name	= "wkup_clkdm",
-	.enable		= &omap2_enable_osc_ck,
-	.disable	= &omap2_disable_osc_ck,
 	.recalc		= &omap2_osc_clk_recalc,
 };
 
 /* Without modem likely 12MHz, with modem likely 13MHz */
 static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
 	.name		= "sys_ck",		/* ~ ref_clk also */
+	.ops		= &clkops_null,
 	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_sys_clk_recalc,
 };
 
 static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.name		= "alt_ck",
+	.ops		= &clkops_null,
 	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &propagate_rate,
 };
 
 /*
@@ -673,7 +663,12 @@ static struct dpll_data dpll_dd = {
 	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
 	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+	.clk_bypass		= &sys_ck,
+	.clk_ref		= &sys_ck,
+	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
 	.max_multiplier		= 1024,
+	.min_divider		= 1,
 	.max_divider		= 16,
 	.rate_tolerance		= DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -684,10 +679,9 @@ static struct dpll_data dpll_dd = {
  */
 static struct clk dpll_ck = {
 	.name		= "dpll_ck",
+	.ops		= &clkops_null,
 	.parent		= &sys_ck,		/* Can be func_32k also */
 	.dpll_data	= &dpll_dd,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | ALWAYS_ENABLED,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_dpllcore_recalc,
 	.set_rate	= &omap2_reprogram_dpllcore,
@@ -695,30 +689,24 @@ static struct clk dpll_ck = {
 
 static struct clk apll96_ck = {
 	.name		= "apll96_ck",
+	.ops		= &clkops_fixed,
 	.parent		= &sys_ck,
 	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.flags		= RATE_FIXED | ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
-	.enable		= &omap2_clk_fixed_enable,
-	.disable	= &omap2_clk_fixed_disable,
-	.recalc		= &propagate_rate,
 };
 
 static struct clk apll54_ck = {
 	.name		= "apll54_ck",
+	.ops		= &clkops_fixed,
 	.parent		= &sys_ck,
 	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.flags		= RATE_FIXED | ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
-	.enable		= &omap2_clk_fixed_enable,
-	.disable	= &omap2_clk_fixed_disable,
-	.recalc		= &propagate_rate,
 };
 
 /*
@@ -745,9 +733,8 @@ static const struct clksel func_54m_clksel[] = {
 
 static struct clk func_54m_ck = {
 	.name		= "func_54m_ck",
+	.ops		= &clkops_null,
 	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -758,9 +745,8 @@ static struct clk func_54m_ck = {
 
 static struct clk core_ck = {
 	.name		= "core_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll_ck,		/* can also be 32k */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -785,9 +771,8 @@ static const struct clksel func_96m_clksel[] = {
 /* The parent of this clock is not selectable on 2420. */
 static struct clk func_96m_ck = {
 	.name		= "func_96m_ck",
+	.ops		= &clkops_null,
 	.parent		= &apll96_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -818,9 +803,8 @@ static const struct clksel func_48m_clksel[] = {
 
 static struct clk func_48m_ck = {
 	.name		= "func_48m_ck",
+	.ops		= &clkops_null,
 	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -833,10 +817,9 @@ static struct clk func_48m_ck = {
 
 static struct clk func_12m_ck = {
 	.name		= "func_12m_ck",
+	.ops		= &clkops_null,
 	.parent		= &func_48m_ck,
 	.fixed_div	= 4,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
@@ -844,8 +827,8 @@ static struct clk func_12m_ck = {
 /* Secure timer, only available in secure mode */
 static struct clk wdt1_osc_ck = {
 	.name		= "ck_wdt1_osc",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -887,9 +870,8 @@ static const struct clksel common_clkout_src_clksel[] = {
 
 static struct clk sys_clkout_src = {
 	.name		= "sys_clkout_src",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
@@ -918,9 +900,8 @@ static const struct clksel sys_clkout_clksel[] = {
 
 static struct clk sys_clkout = {
 	.name		= "sys_clkout",
+	.ops		= &clkops_null,
 	.parent		= &sys_clkout_src,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "wkup_clkdm",
 	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
@@ -933,8 +914,8 @@ static struct clk sys_clkout = {
 /* In 2430, new in 2420 ES2 */
 static struct clk sys_clkout2_src = {
 	.name		= "sys_clkout2_src",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
@@ -955,8 +936,8 @@ static const struct clksel sys_clkout2_clksel[] = {
 /* In 2430, new in 2420 ES2 */
 static struct clk sys_clkout2 = {
 	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
 	.parent		= &sys_clkout2_src,
-	.flags		= CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "wkup_clkdm",
 	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
@@ -968,8 +949,8 @@ static struct clk sys_clkout2 = {
 
 static struct clk emul_ck = {
 	.name		= "emul_ck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKEMUL_CTRL,
 	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
@@ -1003,10 +984,9 @@ static const struct clksel mpu_clksel[] = {
 
 static struct clk mpu_ck = {	/* Control cpu */
 	.name		= "mpu_ck",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "mpu_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
@@ -1046,9 +1026,9 @@ static const struct clksel dsp_fck_clksel[] = {
 
 static struct clk dsp_fck = {
 	.name		= "dsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "dsp_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
@@ -1076,9 +1056,9 @@ static const struct clksel dsp_irate_ick_clksel[] = {
 /* This clock does not exist as such in the TRM. */
 static struct clk dsp_irate_ick = {
 	.name		= "dsp_irate_ick",
+	.ops		= &clkops_null,
 	.parent		= &dsp_fck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
-				CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
 	.clksel		= dsp_irate_ick_clksel,
@@ -1090,8 +1070,9 @@ static struct clk dsp_irate_ick = {
 /* 2420 only */
 static struct clk dsp_ick = {
 	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dsp_irate_ick,
-	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
 };
@@ -1099,8 +1080,9 @@ static struct clk dsp_ick = {
 /* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
 static struct clk iva2_1_ick = {
 	.name		= "iva2_1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dsp_irate_ick,
-	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
 };
@@ -1112,9 +1094,9 @@ static struct clk iva2_1_ick = {
  */
 static struct clk iva1_ifck = {
 	.name		= "iva1_ifck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
-				RATE_PROPAGATES | DELAYED_APP,
+	.flags		= CONFIG_PARTICIPANT | DELAYED_APP,
 	.clkdm_name	= "iva1_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
@@ -1129,8 +1111,8 @@ static struct clk iva1_ifck = {
 /* IVA1 mpu/int/i/f clocks are /2 of parent */
 static struct clk iva1_mpu_int_ifck = {
 	.name		= "iva1_mpu_int_ifck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &iva1_ifck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "iva1_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
@@ -1175,10 +1157,9 @@ static const struct clksel core_l3_clksel[] = {
 
 static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
 	.name		= "core_l3_ck",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "core_l3_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
@@ -1204,9 +1185,9 @@ static const struct clksel usb_l4_ick_clksel[] = {
 /* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
 static struct clk usb_l4_ick = {	/* FS-USB interface clock */
 	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP | CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
@@ -1238,9 +1219,9 @@ static const struct clksel l4_clksel[] = {
 
 static struct clk l4_ck = {		/* used both as an ick and fck */
 	.name		= "l4_ck",
+	.ops		= &clkops_null,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "core_l4_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
@@ -1276,9 +1257,9 @@ static const struct clksel ssi_ssr_sst_fck_clksel[] = {
 
 static struct clk ssi_ssr_sst_fck = {
 	.name		= "ssi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
@@ -1290,6 +1271,20 @@ static struct clk ssi_ssr_sst_fck = {
 	.set_rate	= &omap2_clksel_set_rate
 };
 
+/*
+ * Presumably this is the same as SSI_ICLK.
+ * TRM contradicts itself on what clockdomain SSI_ICLK is in
+ */
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
 
 /*
  * GFX clock domain
@@ -1312,8 +1307,8 @@ static const struct clksel gfx_fck_clksel[] = {
 
 static struct clk gfx_3d_fck = {
 	.name		= "gfx_3d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
@@ -1327,8 +1322,8 @@ static struct clk gfx_3d_fck = {
 
 static struct clk gfx_2d_fck = {
 	.name		= "gfx_2d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
@@ -1342,8 +1337,8 @@ static struct clk gfx_2d_fck = {
 
 static struct clk gfx_ick = {
 	.name		= "gfx_ick",		/* From l3 */
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP_EN_GFX_SHIFT,
@@ -1372,8 +1367,9 @@ static const struct clksel mdm_ick_clksel[] = {
 
 static struct clk mdm_ick = {		/* used both as a ick and fck */
 	.name		= "mdm_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "mdm_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
@@ -1387,8 +1383,8 @@ static struct clk mdm_ick = {		/* used both as a ick and fck */
 
 static struct clk mdm_osc_ck = {
 	.name		= "mdm_osc_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "mdm_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
@@ -1432,8 +1428,8 @@ static const struct clksel dss1_fck_clksel[] = {
 
 static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
 	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
@@ -1442,9 +1438,9 @@ static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
 
 static struct clk dss1_fck = {
 	.name		= "dss1_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &core_ck,		/* Core or sys */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
@@ -1475,9 +1471,9 @@ static const struct clksel dss2_fck_clksel[] = {
 
 static struct clk dss2_fck = {		/* Alt clk used in power management */
 	.name		= "dss2_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
@@ -1490,8 +1486,8 @@ static struct clk dss2_fck = {		/* Alt clk used in power management */
 
 static struct clk dss_54m_fck = {	/* Alt clk used in power management */
 	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
@@ -1518,8 +1514,8 @@ static const struct clksel omap24xx_gpt_clksel[] = {
 
 static struct clk gpt1_ick = {
 	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
@@ -1528,8 +1524,8 @@ static struct clk gpt1_ick = {
 
 static struct clk gpt1_fck = {
 	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
@@ -1544,8 +1540,8 @@ static struct clk gpt1_fck = {
 
 static struct clk gpt2_ick = {
 	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
@@ -1554,8 +1550,8 @@ static struct clk gpt2_ick = {
 
 static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
@@ -1568,8 +1564,8 @@ static struct clk gpt2_fck = {
 
 static struct clk gpt3_ick = {
 	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
@@ -1578,8 +1574,8 @@ static struct clk gpt3_ick = {
 
 static struct clk gpt3_fck = {
 	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
@@ -1592,8 +1588,8 @@ static struct clk gpt3_fck = {
 
 static struct clk gpt4_ick = {
 	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
@@ -1602,8 +1598,8 @@ static struct clk gpt4_ick = {
 
 static struct clk gpt4_fck = {
 	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
@@ -1616,8 +1612,8 @@ static struct clk gpt4_fck = {
 
 static struct clk gpt5_ick = {
 	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
@@ -1626,8 +1622,8 @@ static struct clk gpt5_ick = {
 
 static struct clk gpt5_fck = {
 	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
@@ -1640,8 +1636,8 @@ static struct clk gpt5_fck = {
 
 static struct clk gpt6_ick = {
 	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
@@ -1650,8 +1646,8 @@ static struct clk gpt6_ick = {
 
 static struct clk gpt6_fck = {
 	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
@@ -1664,8 +1660,8 @@ static struct clk gpt6_fck = {
 
 static struct clk gpt7_ick = {
 	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1673,8 +1669,8 @@ static struct clk gpt7_ick = {
 
 static struct clk gpt7_fck = {
 	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
@@ -1687,8 +1683,8 @@ static struct clk gpt7_fck = {
 
 static struct clk gpt8_ick = {
 	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
@@ -1697,8 +1693,8 @@ static struct clk gpt8_ick = {
 
 static struct clk gpt8_fck = {
 	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
@@ -1711,8 +1707,8 @@ static struct clk gpt8_fck = {
 
 static struct clk gpt9_ick = {
 	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
@@ -1721,8 +1717,8 @@ static struct clk gpt9_ick = {
 
 static struct clk gpt9_fck = {
 	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
@@ -1735,8 +1731,8 @@ static struct clk gpt9_fck = {
 
 static struct clk gpt10_ick = {
 	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
@@ -1745,8 +1741,8 @@ static struct clk gpt10_ick = {
 
 static struct clk gpt10_fck = {
 	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
@@ -1759,8 +1755,8 @@ static struct clk gpt10_fck = {
 
 static struct clk gpt11_ick = {
 	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
@@ -1769,8 +1765,8 @@ static struct clk gpt11_ick = {
 
 static struct clk gpt11_fck = {
 	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
@@ -1783,8 +1779,8 @@ static struct clk gpt11_fck = {
 
 static struct clk gpt12_ick = {
 	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
@@ -1793,8 +1789,8 @@ static struct clk gpt12_ick = {
 
 static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
@@ -1807,9 +1803,9 @@ static struct clk gpt12_fck = {
 
 static struct clk mcbsp1_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
@@ -1818,9 +1814,9 @@ static struct clk mcbsp1_ick = {
 
 static struct clk mcbsp1_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
@@ -1829,9 +1825,9 @@ static struct clk mcbsp1_fck = {
 
 static struct clk mcbsp2_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
@@ -1840,9 +1836,9 @@ static struct clk mcbsp2_ick = {
 
 static struct clk mcbsp2_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
@@ -1851,9 +1847,9 @@ static struct clk mcbsp2_fck = {
 
 static struct clk mcbsp3_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
@@ -1862,9 +1858,9 @@ static struct clk mcbsp3_ick = {
 
 static struct clk mcbsp3_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
@@ -1873,9 +1869,9 @@ static struct clk mcbsp3_fck = {
 
 static struct clk mcbsp4_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
@@ -1884,9 +1880,9 @@ static struct clk mcbsp4_ick = {
 
 static struct clk mcbsp4_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
@@ -1895,9 +1891,9 @@ static struct clk mcbsp4_fck = {
 
 static struct clk mcbsp5_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
@@ -1906,9 +1902,9 @@ static struct clk mcbsp5_ick = {
 
 static struct clk mcbsp5_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
@@ -1917,10 +1913,10 @@ static struct clk mcbsp5_fck = {
 
 static struct clk mcspi1_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1928,9 +1924,9 @@ static struct clk mcspi1_ick = {
 
 static struct clk mcspi1_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
@@ -1939,9 +1935,9 @@ static struct clk mcspi1_fck = {
 
 static struct clk mcspi2_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
@@ -1950,9 +1946,9 @@ static struct clk mcspi2_ick = {
 
 static struct clk mcspi2_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
@@ -1961,9 +1957,9 @@ static struct clk mcspi2_fck = {
 
 static struct clk mcspi3_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
@@ -1972,9 +1968,9 @@ static struct clk mcspi3_ick = {
 
 static struct clk mcspi3_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
@@ -1983,8 +1979,8 @@ static struct clk mcspi3_fck = {
 
 static struct clk uart1_ick = {
 	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
@@ -1993,8 +1989,8 @@ static struct clk uart1_ick = {
 
 static struct clk uart1_fck = {
 	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
@@ -2003,8 +1999,8 @@ static struct clk uart1_fck = {
 
 static struct clk uart2_ick = {
 	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
@@ -2013,8 +2009,8 @@ static struct clk uart2_ick = {
 
 static struct clk uart2_fck = {
 	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
@@ -2023,8 +2019,8 @@ static struct clk uart2_fck = {
 
 static struct clk uart3_ick = {
 	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
@@ -2033,8 +2029,8 @@ static struct clk uart3_ick = {
 
 static struct clk uart3_fck = {
 	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
@@ -2043,8 +2039,8 @@ static struct clk uart3_fck = {
 
 static struct clk gpios_ick = {
 	.name		= "gpios_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
@@ -2053,8 +2049,8 @@ static struct clk gpios_ick = {
 
 static struct clk gpios_fck = {
 	.name		= "gpios_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
@@ -2063,8 +2059,8 @@ static struct clk gpios_fck = {
 
 static struct clk mpu_wdt_ick = {
 	.name		= "mpu_wdt_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
@@ -2073,8 +2069,8 @@ static struct clk mpu_wdt_ick = {
 
 static struct clk mpu_wdt_fck = {
 	.name		= "mpu_wdt_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
@@ -2083,9 +2079,9 @@ static struct clk mpu_wdt_fck = {
 
 static struct clk sync_32k_ick = {
 	.name		= "sync_32k_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
@@ -2094,8 +2090,8 @@ static struct clk sync_32k_ick = {
 
 static struct clk wdt1_ick = {
 	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
@@ -2104,9 +2100,9 @@ static struct clk wdt1_ick = {
 
 static struct clk omapctrl_ick = {
 	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
@@ -2115,8 +2111,8 @@ static struct clk omapctrl_ick = {
 
 static struct clk icr_ick = {
 	.name		= "icr_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
@@ -2125,8 +2121,8 @@ static struct clk icr_ick = {
 
 static struct clk cam_ick = {
 	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
@@ -2140,8 +2136,8 @@ static struct clk cam_ick = {
  */
 static struct clk cam_fck = {
 	.name		= "cam_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
@@ -2150,8 +2146,8 @@ static struct clk cam_fck = {
 
 static struct clk mailboxes_ick = {
 	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
@@ -2160,8 +2156,8 @@ static struct clk mailboxes_ick = {
 
 static struct clk wdt4_ick = {
 	.name		= "wdt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
@@ -2170,8 +2166,8 @@ static struct clk wdt4_ick = {
 
 static struct clk wdt4_fck = {
 	.name		= "wdt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
@@ -2180,8 +2176,8 @@ static struct clk wdt4_fck = {
 
 static struct clk wdt3_ick = {
 	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
@@ -2190,8 +2186,8 @@ static struct clk wdt3_ick = {
 
 static struct clk wdt3_fck = {
 	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
@@ -2200,8 +2196,8 @@ static struct clk wdt3_fck = {
 
 static struct clk mspro_ick = {
 	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
@@ -2210,8 +2206,8 @@ static struct clk mspro_ick = {
 
 static struct clk mspro_fck = {
 	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
@@ -2220,8 +2216,8 @@ static struct clk mspro_fck = {
 
 static struct clk mmc_ick = {
 	.name		= "mmc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
@@ -2230,8 +2226,8 @@ static struct clk mmc_ick = {
 
 static struct clk mmc_fck = {
 	.name		= "mmc_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
@@ -2240,8 +2236,8 @@ static struct clk mmc_fck = {
 
 static struct clk fac_ick = {
 	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
@@ -2250,8 +2246,8 @@ static struct clk fac_ick = {
 
 static struct clk fac_fck = {
 	.name		= "fac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
@@ -2260,8 +2256,8 @@ static struct clk fac_fck = {
 
 static struct clk eac_ick = {
 	.name		= "eac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
@@ -2270,8 +2266,8 @@ static struct clk eac_ick = {
 
 static struct clk eac_fck = {
 	.name		= "eac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
@@ -2280,8 +2276,8 @@ static struct clk eac_fck = {
 
 static struct clk hdq_ick = {
 	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
@@ -2290,8 +2286,8 @@ static struct clk hdq_ick = {
 
 static struct clk hdq_fck = {
 	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
@@ -2300,9 +2296,9 @@ static struct clk hdq_fck = {
 
 static struct clk i2c2_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
@@ -2311,9 +2307,9 @@ static struct clk i2c2_ick = {
 
 static struct clk i2c2_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
@@ -2322,9 +2318,9 @@ static struct clk i2c2_fck = {
 
 static struct clk i2chs2_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
@@ -2333,9 +2329,9 @@ static struct clk i2chs2_fck = {
 
 static struct clk i2c1_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
@@ -2344,9 +2340,9 @@ static struct clk i2c1_ick = {
 
 static struct clk i2c1_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
@@ -2355,9 +2351,9 @@ static struct clk i2c1_fck = {
 
 static struct clk i2chs1_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
@@ -2366,33 +2362,33 @@ static struct clk i2chs1_fck = {
 
 static struct clk gpmc_fck = {
 	.name		= "gpmc_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk sdma_fck = {
 	.name		= "sdma_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk sdma_ick = {
 	.name		= "sdma_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk vlynq_ick = {
 	.name		= "vlynq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
@@ -2426,8 +2422,9 @@ static const struct clksel vlynq_fck_clksel[] = {
 
 static struct clk vlynq_fck = {
 	.name		= "vlynq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
@@ -2442,8 +2439,9 @@ static struct clk vlynq_fck = {
 
 static struct clk sdrc_ick = {
 	.name		= "sdrc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
 	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
@@ -2452,8 +2450,8 @@ static struct clk sdrc_ick = {
 
 static struct clk des_ick = {
 	.name		= "des_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
@@ -2462,8 +2460,8 @@ static struct clk des_ick = {
 
 static struct clk sha_ick = {
 	.name		= "sha_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
@@ -2472,8 +2470,8 @@ static struct clk sha_ick = {
 
 static struct clk rng_ick = {
 	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
@@ -2482,8 +2480,8 @@ static struct clk rng_ick = {
 
 static struct clk aes_ick = {
 	.name		= "aes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
@@ -2492,8 +2490,8 @@ static struct clk aes_ick = {
 
 static struct clk pka_ick = {
 	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
@@ -2502,8 +2500,8 @@ static struct clk pka_ick = {
 
 static struct clk usb_fck = {
 	.name		= "usb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
@@ -2512,8 +2510,8 @@ static struct clk usb_fck = {
 
 static struct clk usbhs_ick = {
 	.name		= "usbhs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
@@ -2522,8 +2520,8 @@ static struct clk usbhs_ick = {
 
 static struct clk mmchs1_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
@@ -2532,8 +2530,8 @@ static struct clk mmchs1_ick = {
 
 static struct clk mmchs1_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
@@ -2542,9 +2540,9 @@ static struct clk mmchs1_fck = {
 
 static struct clk mmchs2_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
@@ -2553,9 +2551,9 @@ static struct clk mmchs2_ick = {
 
 static struct clk mmchs2_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2563,8 +2561,8 @@ static struct clk mmchs2_fck = {
 
 static struct clk gpio5_ick = {
 	.name		= "gpio5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
@@ -2573,8 +2571,8 @@ static struct clk gpio5_ick = {
 
 static struct clk gpio5_fck = {
 	.name		= "gpio5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
@@ -2583,8 +2581,8 @@ static struct clk gpio5_fck = {
 
 static struct clk mdm_intc_ick = {
 	.name		= "mdm_intc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
@@ -2593,8 +2591,8 @@ static struct clk mdm_intc_ick = {
 
 static struct clk mmchsdb1_fck = {
 	.name		= "mmchsdb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
@@ -2603,9 +2601,9 @@ static struct clk mmchsdb1_fck = {
 
 static struct clk mmchsdb2_fck = {
 	.name		= "mmchsdb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
@@ -2628,166 +2626,13 @@ static struct clk mmchsdb2_fck = {
  */
 static struct clk virt_prcm_set = {
 	.name		= "virt_prcm_set",
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+	.ops		= &clkops_null,
+	.flags		= DELAYED_APP,
 	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
 	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
 	.set_rate	= &omap2_select_table_rate,
 	.round_rate	= &omap2_round_to_table_rate,
 };
 
-static struct clk *onchip_24xx_clks[] __initdata = {
-	/* external root sources */
-	&func_32k_ck,
-	&osc_ck,
-	&sys_ck,
-	&alt_ck,
-	/* internal analog sources */
-	&dpll_ck,
-	&apll96_ck,
-	&apll54_ck,
-	/* internal prcm root sources */
-	&func_54m_ck,
-	&core_ck,
-	&func_96m_ck,
-	&func_48m_ck,
-	&func_12m_ck,
-	&wdt1_osc_ck,
-	&sys_clkout_src,
-	&sys_clkout,
-	&sys_clkout2_src,
-	&sys_clkout2,
-	&emul_ck,
-	/* mpu domain clocks */
-	&mpu_ck,
-	/* dsp domain clocks */
-	&dsp_fck,
-	&dsp_irate_ick,
-	&dsp_ick,		/* 242x */
-	&iva2_1_ick,		/* 243x */
-	&iva1_ifck,		/* 242x */
-	&iva1_mpu_int_ifck,	/* 242x */
-	/* GFX domain clocks */
-	&gfx_3d_fck,
-	&gfx_2d_fck,
-	&gfx_ick,
-	/* Modem domain clocks */
-	&mdm_ick,
-	&mdm_osc_ck,
-	/* DSS domain clocks */
-	&dss_ick,
-	&dss1_fck,
-	&dss2_fck,
-	&dss_54m_fck,
-	/* L3 domain clocks */
-	&core_l3_ck,
-	&ssi_ssr_sst_fck,
-	&usb_l4_ick,
-	/* L4 domain clocks */
-	&l4_ck,			/* used as both core_l4 and wu_l4 */
-	/* virtual meta-group clock */
-	&virt_prcm_set,
-	/* general l4 interface ck, multi-parent functional clk */
-	&gpt1_ick,
-	&gpt1_fck,
-	&gpt2_ick,
-	&gpt2_fck,
-	&gpt3_ick,
-	&gpt3_fck,
-	&gpt4_ick,
-	&gpt4_fck,
-	&gpt5_ick,
-	&gpt5_fck,
-	&gpt6_ick,
-	&gpt6_fck,
-	&gpt7_ick,
-	&gpt7_fck,
-	&gpt8_ick,
-	&gpt8_fck,
-	&gpt9_ick,
-	&gpt9_fck,
-	&gpt10_ick,
-	&gpt10_fck,
-	&gpt11_ick,
-	&gpt11_fck,
-	&gpt12_ick,
-	&gpt12_fck,
-	&mcbsp1_ick,
-	&mcbsp1_fck,
-	&mcbsp2_ick,
-	&mcbsp2_fck,
-	&mcbsp3_ick,
-	&mcbsp3_fck,
-	&mcbsp4_ick,
-	&mcbsp4_fck,
-	&mcbsp5_ick,
-	&mcbsp5_fck,
-	&mcspi1_ick,
-	&mcspi1_fck,
-	&mcspi2_ick,
-	&mcspi2_fck,
-	&mcspi3_ick,
-	&mcspi3_fck,
-	&uart1_ick,
-	&uart1_fck,
-	&uart2_ick,
-	&uart2_fck,
-	&uart3_ick,
-	&uart3_fck,
-	&gpios_ick,
-	&gpios_fck,
-	&mpu_wdt_ick,
-	&mpu_wdt_fck,
-	&sync_32k_ick,
-	&wdt1_ick,
-	&omapctrl_ick,
-	&icr_ick,
-	&cam_fck,
-	&cam_ick,
-	&mailboxes_ick,
-	&wdt4_ick,
-	&wdt4_fck,
-	&wdt3_ick,
-	&wdt3_fck,
-	&mspro_ick,
-	&mspro_fck,
-	&mmc_ick,
-	&mmc_fck,
-	&fac_ick,
-	&fac_fck,
-	&eac_ick,
-	&eac_fck,
-	&hdq_ick,
-	&hdq_fck,
-	&i2c1_ick,
-	&i2c1_fck,
-	&i2chs1_fck,
-	&i2c2_ick,
-	&i2c2_fck,
-	&i2chs2_fck,
-	&gpmc_fck,
-	&sdma_fck,
-	&sdma_ick,
-	&vlynq_ick,
-	&vlynq_fck,
-	&sdrc_ick,
-	&des_ick,
-	&sha_ick,
-	&rng_ick,
-	&aes_ick,
-	&pka_ick,
-	&usb_fck,
-	&usbhs_ick,
-	&mmchs1_ick,
-	&mmchs1_fck,
-	&mmchs2_ick,
-	&mmchs2_fck,
-	&gpio5_ick,
-	&gpio5_fck,
-	&mdm_intc_ick,
-	&mmchsdb1_fck,
-	&mmchsdb2_fck,
-};
-
 #endif
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 31bb7010bd4..0a14dca31e3 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -30,15 +30,251 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
+#include <asm/clkdev.h>
 
-#include "memory.h"
+#include <mach/sdrc.h>
 #include "clock.h"
-#include "clock34xx.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
+static const struct clkops clkops_noncore_dpll_ops;
+
+#include "clock34xx.h"
+
+struct omap_clk {
+	u32		cpu;
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+#define CK_343X		(1 << 0)
+#define CK_3430ES1	(1 << 1)
+#define CK_3430ES2	(1 << 2)
+
+static struct omap_clk omap34xx_clks[] = {
+	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_343X),
+	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_343X),
+	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_343X),
+	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
+	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
+	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_343X),
+	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
+	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_343X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_343X),
+	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_343X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_343X),
+	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_343X),
+	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
+	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
+	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_343X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_343X),
+	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
+	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
+	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
+	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
+	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
+	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
+	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
+	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
+	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
+	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
+	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
+	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
+	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
+	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
+	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
+	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
+	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
+	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
+	CLK(NULL,	"l4_ick",	&l4_ick,	CK_343X),
+	CLK(NULL,	"rm_ick",	&rm_ick,	CK_343X),
+	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
+	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
+	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
+	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
+	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
+	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
+	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2),
+	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_343X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
+	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_343X),
+	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
+	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
+	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_343X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_343X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
+	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
+	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
+	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
+	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick,	CK_343X),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
+	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
+	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
+	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
+	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
+	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
+	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
+	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
+	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_343X),
+	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_343X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
+	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
+	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_343X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_343X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_343X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_343X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_343X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick,	CK_343X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
+	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
+	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
+	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
+	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
+	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
+	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_343X),
+	CLK(NULL,	"dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
+	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
+	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
+	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
+	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
+	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
+	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
+	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
+	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_343X),
+	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
+	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
+	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_343X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
+	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
+	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_343X),
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_343X),
+	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_343X),
+	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_343X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_343X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_343X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_343X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_343X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_343X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_343X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_343X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_343X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_343X),
+	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
+	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_343X),
+	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_343X),
+	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_343X),
+	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_343X),
+	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_343X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_343X),
+	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_343X),
+	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_343X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_343X),
+	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_343X),
+	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_343X),
+	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_343X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_343X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_343X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_343X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_343X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_343X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_343X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_343X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_343X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_343X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
+	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_343X),
+	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
+	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
+	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
+	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_343X),
+	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_343X),
+	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
+	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
+	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
+	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_343X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_343X),
+	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_343X),
+};
+
 /* CM_AUTOIDLE_PLL*.AUTO_* bit values */
 #define DPLL_AUTOIDLE_DISABLE			0x0
 #define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
@@ -51,11 +287,9 @@
  *
  * Recalculate and propagate the DPLL rate.
  */
-static void omap3_dpll_recalc(struct clk *clk)
+static unsigned long omap3_dpll_recalc(struct clk *clk)
 {
-	clk->rate = omap2_get_dpll_rate(clk);
-
-	propagate_rate(clk);
+	return omap2_get_dpll_rate(clk);
 }
 
 /* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
@@ -78,14 +312,12 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	const struct dpll_data *dd;
 	int i = 0;
 	int ret = -EINVAL;
-	u32 idlest_mask;
 
 	dd = clk->dpll_data;
 
-	state <<= dd->idlest_bit;
-	idlest_mask = 1 << dd->idlest_bit;
+	state <<= __ffs(dd->idlest_mask);
 
-	while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
+	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
 	       i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
@@ -104,6 +336,42 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	return ret;
 }
 
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+	unsigned long fint;
+	u16 f = 0;
+
+	fint = clk->dpll_data->clk_ref->rate / (n + 1);
+
+	pr_debug("clock: fint is %lu\n", fint);
+
+	if (fint >= 750000 && fint <= 1000000)
+		f = 0x3;
+	else if (fint > 1000000 && fint <= 1250000)
+		f = 0x4;
+	else if (fint > 1250000 && fint <= 1500000)
+		f = 0x5;
+	else if (fint > 1500000 && fint <= 1750000)
+		f = 0x6;
+	else if (fint > 1750000 && fint <= 2100000)
+		f = 0x7;
+	else if (fint > 7500000 && fint <= 10000000)
+		f = 0xB;
+	else if (fint > 10000000 && fint <= 12500000)
+		f = 0xC;
+	else if (fint > 12500000 && fint <= 15000000)
+		f = 0xD;
+	else if (fint > 15000000 && fint <= 17500000)
+		f = 0xE;
+	else if (fint > 17500000 && fint <= 21000000)
+		f = 0xF;
+	else
+		pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+	return f;
+}
+
 /* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
 
 /*
@@ -128,25 +396,20 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 
 	ai = omap3_dpll_autoidle_read(clk);
 
+	omap3_dpll_deny_idle(clk);
+
 	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
 
-	if (ai) {
-		/*
-		 * If no downstream clocks are enabled, CM_IDLEST bit
-		 * may never become active, so don't wait for DPLL to lock.
-		 */
-		r = 0;
+	r = _omap3_wait_dpll_status(clk, 1);
+
+	if (ai)
 		omap3_dpll_allow_idle(clk);
-	} else {
-		r = _omap3_wait_dpll_status(clk, 1);
-		omap3_dpll_deny_idle(clk);
-	};
 
 	return r;
 }
 
 /*
- * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
  * @clk: pointer to a DPLL struct clk
  *
  * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
@@ -236,14 +499,25 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 static int omap3_noncore_dpll_enable(struct clk *clk)
 {
 	int r;
+	struct dpll_data *dd;
 
 	if (clk == &dpll3_ck)
 		return -EINVAL;
 
-	if (clk->parent->rate == clk_get_rate(clk))
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->rate == dd->clk_bypass->rate) {
+		WARN_ON(clk->parent != dd->clk_bypass);
 		r = _omap3_noncore_dpll_bypass(clk);
-	else
+	} else {
+		WARN_ON(clk->parent != dd->clk_ref);
 		r = _omap3_noncore_dpll_lock(clk);
+	}
+	/* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
+	if (!r)
+		clk->rate = omap2_get_dpll_rate(clk);
 
 	return r;
 }
@@ -270,6 +544,215 @@ static void omap3_noncore_dpll_disable(struct clk *clk)
 	_omap3_noncore_dpll_stop(clk);
 }
 
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock..  Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	/* Set jitter correction */
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->freqsel_mask;
+	v |= freqsel << __ffs(dd->freqsel_mask);
+	__raw_writel(v, dd->control_reg);
+
+	/* Set DPLL multiplier, divider */
+	v = __raw_readl(dd->mult_div1_reg);
+	v &= ~(dd->mult_mask | dd->div1_mask);
+	v |= m << __ffs(dd->mult_mask);
+	v |= (n - 1) << __ffs(dd->div1_mask);
+	__raw_writel(v, dd->mult_div1_reg);
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass.  Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *new_parent = NULL;
+	u16 freqsel;
+	struct dpll_data *dd;
+	int ret;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (rate == omap2_get_dpll_rate(clk))
+		return 0;
+
+	/*
+	 * Ensure both the bypass and ref clocks are enabled prior to
+	 * doing anything; we need the bypass clock running to reprogram
+	 * the DPLL.
+	 */
+	omap2_clk_enable(dd->clk_bypass);
+	omap2_clk_enable(dd->clk_ref);
+
+	if (dd->clk_bypass->rate == rate &&
+	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
+
+		ret = _omap3_noncore_dpll_bypass(clk);
+		if (!ret)
+			new_parent = dd->clk_bypass;
+	} else {
+		if (dd->last_rounded_rate != rate)
+			omap2_dpll_round_rate(clk, rate);
+
+		if (dd->last_rounded_rate == 0)
+			return -EINVAL;
+
+		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+		if (!freqsel)
+			WARN_ON(1);
+
+		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+			 clk->name, rate);
+
+		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+						 dd->last_rounded_n, freqsel);
+		if (!ret)
+			new_parent = dd->clk_ref;
+	}
+	if (!ret) {
+		/*
+		 * Switch the parent clock in the heirarchy, and make sure
+		 * that the new parent's usecount is correct.  Note: we
+		 * enable the new parent before disabling the old to avoid
+		 * any unnecessary hardware disable->enable transitions.
+		 */
+		if (clk->usecount) {
+			omap2_clk_enable(new_parent);
+			omap2_clk_disable(clk->parent);
+		}
+		clk_reparent(clk, new_parent);
+		clk->rate = rate;
+	}
+	omap2_clk_disable(dd->clk_ref);
+	omap2_clk_disable(dd->clk_bypass);
+
+	return 0;
+}
+
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
+	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+	 * on DPLL4.
+	 */
+	if (omap_rev() == OMAP3430_REV_ES1_0) {
+		printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+		       "silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+	return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
+
+/*
+ * CORE DPLL (DPLL3) rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate.  Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 new_div = 0;
+	unsigned long validrate, sdrcrate;
+	struct omap_sdrc_params *sp;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	if (clk != &dpll3_m2_ck)
+		return -EINVAL;
+
+	if (rate == clk->rate)
+		return 0;
+
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
+
+	sdrcrate = sdrc_ick.rate;
+	if (rate > clk->rate)
+		sdrcrate <<= ((rate / clk->rate) - 1);
+	else
+		sdrcrate >>= ((clk->rate / rate) - 1);
+
+	sp = omap2_sdrc_get_params(sdrcrate);
+	if (!sp)
+		return -EINVAL;
+
+	pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		validrate);
+	pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
+		sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+
+	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
+	WARN_ON(new_div != 1 && new_div != 2);
+
+	/* REVISIT: Add SDRC_MR changing to this code also */
+	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
+				  sp->actim_ctrlb, new_div);
+
+	return 0;
+}
+
+
+static const struct clkops clkops_noncore_dpll_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+};
+
+/* DPLL autoidle read/set code */
+
+
 /**
  * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
  * @clk: struct clk * of the DPLL to read
@@ -356,9 +839,10 @@ static void omap3_dpll_deny_idle(struct clk *clk)
  * Using parent clock DPLL data, look up DPLL state.  If locked, set our
  * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
  */
-static void omap3_clkoutx2_recalc(struct clk *clk)
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	unsigned long rate;
 	u32 v;
 	struct clk *pclk;
 
@@ -372,17 +856,15 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
 
 	dd = pclk->dpll_data;
 
-	WARN_ON(!dd->control_reg || !dd->enable_mask);
+	WARN_ON(!dd->enable_mask);
 
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
-	if (v != DPLL_LOCKED)
-		clk->rate = clk->parent->rate;
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		rate = clk->parent->rate;
 	else
-		clk->rate = clk->parent->rate * 2;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
+		rate = clk->parent->rate * 2;
+	return rate;
 }
 
 /* Common clock code */
@@ -432,7 +914,7 @@ static int __init omap2_clk_arch_init(void)
 
 	/* REVISIT: not yet ready for 343x */
 #if 0
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+	if (clk_set_rate(&virt_prcm_set, mpurate))
 		printk(KERN_ERR "Could not find matching MPU rate\n");
 #endif
 
@@ -450,26 +932,13 @@ arch_initcall(omap2_clk_arch_init);
 int __init omap2_clk_init(void)
 {
 	/* struct prcm_config *prcm; */
-	struct clk **clkp;
+	struct omap_clk *c;
 	/* u32 clkrate; */
 	u32 cpu_clkflg;
 
-	/* REVISIT: Ultimately this will be used for multiboot */
-#if 0
-	if (cpu_is_omap242x()) {
-		cpu_mask = RATE_IN_242X;
-		cpu_clkflg = CLOCK_IN_OMAP242X;
-		clkp = onchip_24xx_clks;
-	} else if (cpu_is_omap2430()) {
-		cpu_mask = RATE_IN_243X;
-		cpu_clkflg = CLOCK_IN_OMAP243X;
-		clkp = onchip_24xx_clks;
-	}
-#endif
 	if (cpu_is_omap34xx()) {
 		cpu_mask = RATE_IN_343X;
-		cpu_clkflg = CLOCK_IN_OMAP343X;
-		clkp = onchip_34xx_clks;
+		cpu_clkflg = CK_343X;
 
 		/*
 		 * Update this if there are further clock changes between ES2
@@ -477,23 +946,24 @@ int __init omap2_clk_init(void)
 		 */
 		if (omap_rev() == OMAP3430_REV_ES1_0) {
 			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
-			cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
+			cpu_clkflg |= CK_3430ES1;
 		} else {
 			cpu_mask |= RATE_IN_3430ES2;
-			cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
+			cpu_clkflg |= CK_3430ES2;
 		}
 	}
 
 	clk_init(&omap2_clk_functions);
 
-	for (clkp = onchip_34xx_clks;
-	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
-	     clkp++) {
-		if ((*clkp)->flags & cpu_clkflg) {
-			clk_register(*clkp);
-			omap2_init_clk_clkdm(*clkp);
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		clk_init_one(c->lk.clk);
+
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
 		}
-	}
 
 	/* REVISIT: Not yet ready for OMAP3 */
 #if 0
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index a826094d89b..70ec10deb65 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,13 +27,14 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
-static void omap3_dpll_recalc(struct clk *clk);
-static void omap3_clkoutx2_recalc(struct clk *clk);
+static unsigned long omap3_dpll_recalc(struct clk *clk);
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
 static void omap3_dpll_deny_idle(struct clk *clk);
 static u32 omap3_dpll_autoidle_read(struct clk *clk);
-static int omap3_noncore_dpll_enable(struct clk *clk);
-static void omap3_noncore_dpll_disable(struct clk *clk);
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
 
 /* Maximum DPLL multiplier, divider values for OMAP3 */
 #define OMAP3_MAX_DPLL_MULT		2048
@@ -47,6 +48,10 @@ static void omap3_noncore_dpll_disable(struct clk *clk);
  * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
  */
 
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
 /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
 #define DPLL_LOW_POWER_STOP		0x1
 #define DPLL_LOW_POWER_BYPASS		0x5
@@ -57,67 +62,59 @@ static void omap3_noncore_dpll_disable(struct clk *clk);
 /* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
 static struct clk omap_32k_fck = {
 	.name		= "omap_32k_fck",
+	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk secure_32k_fck = {
 	.name		= "secure_32k_fck",
+	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.flags		= RATE_FIXED,
 };
 
 /* Virtual source clocks for osc_sys_ck */
 static struct clk virt_12m_ck = {
 	.name		= "virt_12m_ck",
+	.ops		= &clkops_null,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_13m_ck = {
 	.name		= "virt_13m_ck",
+	.ops		= &clkops_null,
 	.rate		= 13000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_16_8m_ck = {
 	.name		= "virt_16_8m_ck",
+	.ops		= &clkops_null,
 	.rate		= 16800000,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_19_2m_ck = {
 	.name		= "virt_19_2m_ck",
+	.ops		= &clkops_null,
 	.rate		= 19200000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_26m_ck = {
 	.name		= "virt_26m_ck",
+	.ops		= &clkops_null,
 	.rate		= 26000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_38_4m_ck = {
 	.name		= "virt_38_4m_ck",
+	.ops		= &clkops_null,
 	.rate		= 38400000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.flags		= RATE_FIXED,
 };
 
 static const struct clksel_rate osc_sys_12m_rates[] = {
@@ -164,13 +161,13 @@ static const struct clksel osc_sys_clksel[] = {
 /* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
 static struct clk osc_sys_ck = {
 	.name		= "osc_sys_ck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP3430_PRM_CLKSEL,
 	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
 	.clksel		= osc_sys_clksel,
 	/* REVISIT: deal with autoextclkmode? */
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= RATE_FIXED,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -189,36 +186,34 @@ static const struct clksel sys_clksel[] = {
 /* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
 static struct clk sys_ck = {
 	.name		= "sys_ck",
+	.ops		= &clkops_null,
 	.parent		= &osc_sys_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
 	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
 	.clksel		= sys_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk sys_altclk = {
 	.name		= "sys_altclk",
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.ops		= &clkops_null,
 };
 
 /* Optional external clock input for some McBSPs */
 static struct clk mcbsp_clks = {
 	.name		= "mcbsp_clks",
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
-	.recalc		= &propagate_rate,
+	.ops		= &clkops_null,
 };
 
 /* PRM EXTERNAL CLOCK OUTPUT */
 
 static struct clk sys_clkout1 = {
 	.name		= "sys_clkout1",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &osc_sys_ck,
 	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
 	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -226,16 +221,6 @@ static struct clk sys_clkout1 = {
 
 /* CM CLOCKS */
 
-static const struct clksel_rate dpll_bypass_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dpll_locked_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
 static const struct clksel_rate div16_dpll_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
 	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
@@ -263,6 +248,9 @@ static struct dpll_data dpll1_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll1_fck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
@@ -272,18 +260,21 @@ static struct dpll_data dpll1_dd = {
 	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
 	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_bit	= OMAP3430_ST_MPU_CLK_SHIFT,
+	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll1_ck = {
 	.name		= "dpll1_ck",
+	.ops		= &clkops_null,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll1_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll1_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -293,9 +284,9 @@ static struct clk dpll1_ck = {
  */
 static struct clk dpll1_x2_ck = {
 	.name		= "dpll1_x2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll1_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll1_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -311,13 +302,13 @@ static const struct clksel div16_dpll1_x2m2_clksel[] = {
  */
 static struct clk dpll1_x2m2_ck = {
 	.name		= "dpll1_x2m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll1_x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
 	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll1_x2m2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll1_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -329,6 +320,9 @@ static struct dpll_data dpll2_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll2_fck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
 	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
@@ -339,20 +333,21 @@ static struct dpll_data dpll2_dd = {
 	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
 	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_bit	= OMAP3430_ST_IVA2_CLK_SHIFT,
+	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll2_ck = {
 	.name		= "dpll2_ck",
+	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll2_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
 	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll2_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -367,14 +362,14 @@ static const struct clksel div16_dpll2_m2x2_clksel[] = {
  */
 static struct clk dpll2_m2_ck = {
 	.name		= "dpll2_m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
 					  OMAP3430_CM_CLKSEL2_PLL),
 	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll2_m2x2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll2_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -387,6 +382,9 @@ static struct dpll_data dpll3_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
 	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
@@ -394,17 +392,21 @@ static struct dpll_data dpll3_dd = {
 	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
 	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
 	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll3_ck = {
 	.name		= "dpll3_ck",
+	.ops		= &clkops_null,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll3_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.round_rate	= &omap2_dpll_round_rate,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -414,9 +416,9 @@ static struct clk dpll3_ck = {
  */
 static struct clk dpll3_x2_ck = {
 	.name		= "dpll3_x2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -460,55 +462,34 @@ static const struct clksel div31_dpll3m2_clksel[] = {
 	{ .parent = NULL }
 };
 
-/*
- * DPLL3 output M2
- * REVISIT: This DPLL output divider must be changed in SRAM, so until
- * that code is ready, this should remain a 'read-only' clksel clock.
- */
+/* DPLL3 output M2 - primary control point for CORE speed */
 static struct clk dpll3_m2_ck = {
 	.name		= "dpll3_m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div31_dpll3m2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll3_clkdm",
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap3_core_dpll_m2_set_rate,
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static const struct clksel core_ck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk core_ck = {
 	.name		= "core_ck",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= core_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel dpll3_m2x2_ck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2_ck,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= dpll3_m2x2_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
-	.recalc		= &omap2_clksel_recalc,
+	.ops		= &clkops_null,
+	.parent		= &dpll3_x2_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &followparent_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
@@ -520,42 +501,34 @@ static const struct clksel div16_dpll3_clksel[] = {
 /* This virtual clock is the source for dpll3_m3x2_ck */
 static struct clk dpll3_m3_ck = {
 	.name		= "dpll3_m3_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
 	.clksel		= div16_dpll3_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll3_m3x2_ck = {
 	.name		= "dpll3_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll3_m3_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel emu_core_alwon_ck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk emu_core_alwon_ck = {
 	.name		= "emu_core_alwon_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_m3x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= emu_core_alwon_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
-	.recalc		= &omap2_clksel_recalc,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &followparent_recalc,
 };
 
 /* DPLL4 */
@@ -565,6 +538,9 @@ static struct dpll_data dpll4_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
 	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
 	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
@@ -574,20 +550,21 @@ static struct dpll_data dpll4_dd = {
 	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
 	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_bit	= OMAP3430_ST_PERIPH_CLK_SHIFT,
+	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll4_ck = {
 	.name		= "dpll4_ck",
+	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll4_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
 	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_dpll4_set_rate,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -598,9 +575,9 @@ static struct clk dpll4_ck = {
  */
 static struct clk dpll4_x2_ck = {
 	.name		= "dpll4_x2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -612,112 +589,101 @@ static const struct clksel div16_dpll4_clksel[] = {
 /* This virtual clock is the source for dpll4_m2x2_ck */
 static struct clk dpll4_m2_ck = {
 	.name		= "dpll4_m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
 	.clksel_mask	= OMAP3430_DIV_96M_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m2x2_ck = {
 	.name		= "dpll4_m2x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel omap_96m_alwon_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
+/*
+ * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
+ * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
+ * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
+ * CM_96K_(F)CLK.
+ */
 static struct clk omap_96m_alwon_fck = {
 	.name		= "omap_96m_alwon_fck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_m2x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= omap_96m_alwon_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				 PARENT_CONTROLS_CLOCK,
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
-static struct clk omap_96m_fck = {
-	.name		= "omap_96m_fck",
+static struct clk cm_96m_fck = {
+	.name		= "cm_96m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &followparent_recalc,
 };
 
-static const struct clksel cm_96m_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+static const struct clksel_rate omap_96m_dpll_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_96m_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_96m_fck_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
+	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
 	{ .parent = NULL }
 };
 
-static struct clk cm_96m_fck = {
-	.name		= "cm_96m_fck",
-	.parent		= &dpll4_m2x2_ck,
+static struct clk omap_96m_fck = {
+	.name		= "omap_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
 	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= cm_96m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
+	.clksel		= omap_96m_fck_clksel,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 /* This virtual clock is the source for dpll4_m3x2_ck */
 static struct clk dpll4_m3_ck = {
 	.name		= "dpll4_m3_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m3x2_ck = {
 	.name		= "dpll4_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m3_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel virt_omap_54m_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
-static struct clk virt_omap_54m_fck = {
-	.name		= "virt_omap_54m_fck",
-	.parent		= &dpll4_m3x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= virt_omap_54m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
 static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
 	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
 	{ .div = 0 }
@@ -729,23 +695,22 @@ static const struct clksel_rate omap_54m_alt_rates[] = {
 };
 
 static const struct clksel omap_54m_clksel[] = {
-	{ .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
 	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
 	{ .parent = NULL }
 };
 
 static struct clk omap_54m_fck = {
 	.name		= "omap_54m_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_54M,
+	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
 	.clksel		= omap_54m_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static const struct clksel_rate omap_48m_96md2_rates[] = {
+static const struct clksel_rate omap_48m_cm96m_rates[] = {
 	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
 	{ .div = 0 }
 };
@@ -756,106 +721,112 @@ static const struct clksel_rate omap_48m_alt_rates[] = {
 };
 
 static const struct clksel omap_48m_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates },
+	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
 	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
 	{ .parent = NULL }
 };
 
 static struct clk omap_48m_fck = {
 	.name		= "omap_48m_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_48M,
+	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
 	.clksel		= omap_48m_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk omap_12m_fck = {
 	.name		= "omap_12m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
 	.fixed_div	= 4,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
 
 /* This virstual clock is the source for dpll4_m4x2_ck */
 static struct clk dpll4_m4_ck = {
 	.name		= "dpll4_m4_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m4x2_ck = {
 	.name		= "dpll4_m4x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m4_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
 /* This virtual clock is the source for dpll4_m5x2_ck */
 static struct clk dpll4_m5_ck = {
 	.name		= "dpll4_m5_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m5x2_ck = {
 	.name		= "dpll4_m5x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m5_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
 /* This virtual clock is the source for dpll4_m6x2_ck */
 static struct clk dpll4_m6_ck = {
 	.name		= "dpll4_m6_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m6x2_ck = {
 	.name		= "dpll4_m6x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m6_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
 static struct clk emu_per_alwon_ck = {
 	.name		= "emu_per_alwon_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_m6x2_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -867,6 +838,9 @@ static struct dpll_data dpll5_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
 	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
 	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
 	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
@@ -876,20 +850,21 @@ static struct dpll_data dpll5_dd = {
 	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
 	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.idlest_bit	= OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
 
 static struct clk dpll5_ck = {
 	.name		= "dpll5_ck",
+	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll5_dd,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
 	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll5_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -900,31 +875,13 @@ static const struct clksel div16_dpll5_clksel[] = {
 
 static struct clk dpll5_m2_ck = {
 	.name		= "dpll5_m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll5_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
 	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
 	.clksel		= div16_dpll5_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel omap_120m_fck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_120m_fck = {
-	.name		= "omap_120m_fck",
-	.parent		= &dpll5_m2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.clksel_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
-	.clksel		= omap_120m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clkdm_name	= "dpll5_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -951,22 +908,23 @@ static const struct clksel_rate clkout2_src_54m_rates[] = {
 };
 
 static const struct clksel clkout2_src_clksel[] = {
-	{ .parent = &core_ck,		  .rates = clkout2_src_core_rates },
-	{ .parent = &sys_ck,		  .rates = clkout2_src_sys_rates },
-	{ .parent = &omap_96m_alwon_fck,  .rates = clkout2_src_96m_rates },
-	{ .parent = &omap_54m_fck,	  .rates = clkout2_src_54m_rates },
+	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
+	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
+	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
+	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
 	{ .parent = NULL }
 };
 
 static struct clk clkout2_src_ck = {
 	.name		= "clkout2_src_ck",
+	.ops		= &clkops_omap2_dflt,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
 	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
 	.clksel		= clkout2_src_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.clkdm_name	= "core_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -986,11 +944,11 @@ static const struct clksel sys_clkout2_clksel[] = {
 
 static struct clk sys_clkout2 = {
 	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
 	.clksel		= sys_clkout2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -998,16 +956,22 @@ static struct clk sys_clkout2 = {
 
 static struct clk corex2_fck = {
 	.name		= "corex2_fck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_m2x2_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &followparent_recalc,
 };
 
 /* DPLL power domain clock controls */
 
-static const struct clksel div2_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div2_rates },
+static const struct clksel_rate div4_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel div4_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div4_rates },
 	{ .parent = NULL }
 };
 
@@ -1017,39 +981,21 @@ static const struct clksel div2_core_clksel[] = {
  */
 static struct clk dpll1_fck = {
 	.name		= "dpll1_fck",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
-	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clksel		= div4_core_clksel,
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/*
- * MPU clksel:
- * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll1_fck'
- */
-static const struct clksel mpu_clksel[] = {
-	{ .parent = &dpll1_fck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk mpu_ck = {
 	.name		= "mpu_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll1_x2m2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.clksel		= mpu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
@@ -1066,13 +1012,12 @@ static const struct clksel arm_fck_clksel[] = {
 
 static struct clk arm_fck = {
 	.name		= "arm_fck",
+	.ops		= &clkops_null,
 	.parent		= &mpu_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= arm_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1084,63 +1029,48 @@ static struct clk arm_fck = {
  */
 static struct clk emu_mpu_alwon_ck = {
 	.name		= "emu_mpu_alwon_ck",
+	.ops		= &clkops_null,
 	.parent		= &mpu_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dpll2_fck = {
 	.name		= "dpll2_fck",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
-	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.clksel		= div4_core_clksel,
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/*
- * IVA2 clksel:
- * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll2_fck'
- */
-
-static const struct clksel iva2_clksel[] = {
-	{ .parent = &dpll2_fck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk iva2_ck = {
 	.name		= "iva2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll2_m2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
-					  OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
-	.clksel		= iva2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "iva2_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* Common interface clocks */
 
+static const struct clksel div2_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
 static struct clk l3_ick = {
 	.name		= "l3_ick",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
 	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1152,13 +1082,12 @@ static const struct clksel div2_l3_clksel[] = {
 
 static struct clk l4_ick = {
 	.name		= "l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
 	.clksel		= div2_l3_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 
@@ -1171,12 +1100,12 @@ static const struct clksel div2_l4_clksel[] = {
 
 static struct clk rm_ick = {
 	.name		= "rm_ick",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
 	.clksel		= div2_l4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1192,53 +1121,52 @@ static const struct clksel gfx_l3_clksel[] = {
 /* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
 static struct clk gfx_l3_ck = {
 	.name		= "gfx_l3_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gfx_l3_fck = {
 	.name		= "gfx_l3_fck",
+	.ops		= &clkops_null,
 	.parent		= &gfx_l3_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
 	.clksel		= gfx_l3_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gfx_l3_ick = {
 	.name		= "gfx_l3_ick",
+	.ops		= &clkops_null,
 	.parent		= &gfx_l3_ck,
-	.flags		= CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gfx_cg1_ck = {
 	.name		= "gfx_cg1_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gfx_cg2_ck = {
 	.name		= "gfx_cg2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1265,24 +1193,24 @@ static const struct clksel sgx_clksel[] = {
 
 static struct clk sgx_fck = {
 	.name		= "sgx_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
 	.clksel		= sgx_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "sgx_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk sgx_ick = {
 	.name		= "sgx_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
+	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
 	.clkdm_name	= "sgx_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1291,11 +1219,11 @@ static struct clk sgx_ick = {
 
 static struct clk d2d_26m_fck = {
 	.name		= "d2d_26m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "d2d_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1308,6 +1236,7 @@ static const struct clksel omap343x_gpt_clksel[] = {
 
 static struct clk gpt10_fck = {
 	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1315,13 +1244,13 @@ static struct clk gpt10_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gpt11_fck = {
 	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1329,35 +1258,34 @@ static struct clk gpt11_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk cpefuse_fck = {
 	.name		= "cpefuse_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk ts_fck = {
 	.name		= "ts_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
-	.parent		= &omap_120m_fck,
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll5_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1365,84 +1293,83 @@ static struct clk usbtll_fck = {
 
 static struct clk core_96m_fck = {
 	.name		= "core_96m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_96m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mmchs3_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mmchs2_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mspro_fck = {
 	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mmchs1_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk i2c3_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk i2c2_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk i2c1_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1469,6 +1396,7 @@ static const struct clksel mcbsp_15_clksel[] = {
 
 static struct clk mcbsp5_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1476,13 +1404,13 @@ static struct clk mcbsp5_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
 	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
 	.clksel		= mcbsp_15_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp1_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1490,7 +1418,6 @@ static struct clk mcbsp1_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
 	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
 	.clksel		= mcbsp_15_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1499,77 +1426,76 @@ static struct clk mcbsp1_fck = {
 
 static struct clk core_48m_fck = {
 	.name		= "core_48m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcspi4_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcspi3_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcspi2_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcspi1_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk uart2_fck = {
 	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk uart1_fck = {
 	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk fshostusb_fck = {
 	.name		= "fshostusb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1577,19 +1503,18 @@ static struct clk fshostusb_fck = {
 
 static struct clk core_12m_fck = {
 	.name		= "core_12m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_12m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk hdq_fck = {
 	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_12m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1612,22 +1537,22 @@ static const struct clksel ssi_ssr_clksel[] = {
 
 static struct clk ssi_ssr_fck = {
 	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap2_dflt,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
 	.clksel		= ssi_ssr_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk ssi_sst_fck = {
 	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
 	.parent		= &ssi_ssr_fck,
 	.fixed_div	= 2,
-	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
 
@@ -1641,39 +1566,39 @@ static struct clk ssi_sst_fck = {
  */
 static struct clk core_l3_ick = {
 	.name		= "core_l3_ick",
+	.ops		= &clkops_null,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk hsotgusb_ick = {
 	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk sdrc_ick = {
 	.name		= "sdrc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpmc_fck = {
 	.name		= "gpmc_fck",
+	.ops		= &clkops_null,
 	.parent		= &core_l3_ick,
-	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
-				ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT, /* huh? */
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1682,18 +1607,17 @@ static struct clk gpmc_fck = {
 
 static struct clk security_l3_ick = {
 	.name		= "security_l3_ick",
+	.ops		= &clkops_null,
 	.parent		= &l3_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk pka_ick = {
 	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1701,31 +1625,30 @@ static struct clk pka_ick = {
 
 static struct clk core_l4_ick = {
 	.name		= "core_l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk usbtll_ick = {
 	.name		= "usbtll_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mmchs3_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1733,250 +1656,251 @@ static struct clk mmchs3_ick = {
 /* Intersystem Communication Registers - chassis mode only */
 static struct clk icr_ick = {
 	.name		= "icr_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk aes2_ick = {
 	.name		= "aes2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk sha12_ick = {
 	.name		= "sha12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk des2_ick = {
 	.name		= "des2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mmchs2_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mmchs1_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mspro_ick = {
 	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk hdq_ick = {
 	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcspi4_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcspi3_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcspi2_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcspi1_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk i2c3_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk i2c2_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk i2c1_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk uart2_ick = {
 	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk uart1_ick = {
 	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt11_ick = {
 	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt10_ick = {
 	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcbsp5_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcbsp1_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk fac_ick = {
 	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mailboxes_ick = {
 	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk omapctrl_ick = {
 	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1984,19 +1908,18 @@ static struct clk omapctrl_ick = {
 
 static struct clk ssi_l4_ick = {
 	.name		= "ssi_l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk ssi_ick = {
 	.name		= "ssi_ick",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &ssi_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2011,6 +1934,7 @@ static const struct clksel usb_l4_clksel[] = {
 
 static struct clk usb_l4_ick = {
 	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -2018,7 +1942,6 @@ static struct clk usb_l4_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
 	.clksel		= usb_l4_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2028,98 +1951,87 @@ static struct clk usb_l4_ick = {
 
 static struct clk security_l4_ick2 = {
 	.name		= "security_l4_ick2",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk aes1_ick = {
 	.name		= "aes1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk rng_ick = {
 	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk sha11_ick = {
 	.name		= "sha11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk des1_ick = {
 	.name		= "des1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 /* DSS */
-static const struct clksel dss1_alwon_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk dss1_alwon_fck = {
 	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll4_m4x2_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= dss1_alwon_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_54m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dss_96m_fck = {
 	.name		= "dss_96m_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_96m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dss2_alwon_fck = {
 	.name		= "dss2_alwon_fck",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2127,45 +2039,46 @@ static struct clk dss2_alwon_fck = {
 static struct clk dss_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 /* CAM */
 
-static const struct clksel cam_mclk_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk cam_mclk = {
 	.name		= "cam_mclk",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m5x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= cam_mclk_clksel,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "cam_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk cam_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk csi2_96m_fck = {
+	.name		= "csi2_96m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
 	.clkdm_name	= "cam_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2174,22 +2087,22 @@ static struct clk cam_ick = {
 
 static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
-	.parent		= &omap_120m_fck,
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll5_m2_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2197,22 +2110,11 @@ static struct clk usbhost_48m_fck = {
 static struct clk usbhost_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "usbhost_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_sar_fck = {
-	.name		= "usbhost_sar_fck",
-	.parent		= &osc_sys_ck,
-	.init		= &omap2_init_clk_clkdm,
-	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
-	.enable_bit	= OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2237,7 +2139,7 @@ static const struct clksel_rate usim_120m_rates[] = {
 
 static const struct clksel usim_clksel[] = {
 	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
-	{ .parent = &omap_120m_fck,	.rates = usim_120m_rates },
+	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
 	{ .parent = &sys_ck,		.rates = div2_rates },
 	{ .parent = NULL },
 };
@@ -2245,63 +2147,63 @@ static const struct clksel usim_clksel[] = {
 /* 3430ES2 only */
 static struct clk usim_fck = {
 	.name		= "usim_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
 	.clksel		= usim_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 /* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
 static struct clk gpt1_fck = {
 	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk wkup_32k_fck = {
 	.name		= "wkup_32k_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio1_dbck = {
 	.name		= "gpio1_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk wdt2_fck = {
 	.name		= "wdt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk wkup_l4_ick = {
 	.name		= "wkup_l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &sys_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2310,50 +2212,50 @@ static struct clk wkup_l4_ick = {
 /* Never specifically named in the TRM, so we have to infer a likely name */
 static struct clk usim_ick = {
 	.name		= "usim_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk wdt2_ick = {
 	.name		= "wdt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk wdt1_ick = {
 	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio1_ick = {
 	.name		= "gpio1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk omap_32ksync_ick = {
 	.name		= "omap_32ksync_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2361,20 +2263,20 @@ static struct clk omap_32ksync_ick = {
 /* XXX This clock no longer exists in 3430 TRM rev F */
 static struct clk gpt12_ick = {
 	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt1_ick = {
 	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2385,406 +2287,404 @@ static struct clk gpt1_ick = {
 
 static struct clk per_96m_fck = {
 	.name		= "per_96m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk per_48m_fck = {
 	.name		= "per_48m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk uart3_fck = {
 	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gpt3_fck = {
 	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gpt4_fck = {
 	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gpt5_fck = {
 	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gpt6_fck = {
 	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gpt7_fck = {
 	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gpt8_fck = {
 	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gpt9_fck = {
 	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk per_32k_alwon_fck = {
 	.name		= "per_32k_alwon_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_32k_fck,
 	.clkdm_name	= "per_clkdm",
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio6_dbck = {
 	.name		= "gpio6_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio5_dbck = {
 	.name		= "gpio5_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio4_dbck = {
 	.name		= "gpio4_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio3_dbck = {
 	.name		= "gpio3_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio2_dbck = {
 	.name		= "gpio2_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk wdt3_fck = {
 	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk per_l4_ick = {
 	.name		= "per_l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio6_ick = {
 	.name		= "gpio6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio5_ick = {
 	.name		= "gpio5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio4_ick = {
 	.name		= "gpio4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio3_ick = {
 	.name		= "gpio3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio2_ick = {
 	.name		= "gpio2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk wdt3_ick = {
 	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk uart3_ick = {
 	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt9_ick = {
 	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt8_ick = {
 	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt7_ick = {
 	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt6_ick = {
 	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt5_ick = {
 	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt4_ick = {
 	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt3_ick = {
 	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt2_ick = {
 	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcbsp2_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcbsp3_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk mcbsp4_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,  .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
 	{ .parent = NULL }
 };
 
 static struct clk mcbsp2_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2792,13 +2692,13 @@ static struct clk mcbsp2_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
 	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp3_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2806,13 +2706,13 @@ static struct clk mcbsp3_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
 	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp4_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2820,7 +2720,6 @@ static struct clk mcbsp4_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
 	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2864,11 +2763,11 @@ static const struct clksel emu_src_clksel[] = {
  */
 static struct clk emu_src_ck = {
 	.name		= "emu_src_ck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2888,11 +2787,11 @@ static const struct clksel pclk_emu_clksel[] = {
 
 static struct clk pclk_fck = {
 	.name		= "pclk_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
 	.clksel		= pclk_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2911,11 +2810,11 @@ static const struct clksel pclkx2_emu_clksel[] = {
 
 static struct clk pclkx2_fck = {
 	.name		= "pclkx2_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
 	.clksel		= pclkx2_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2927,22 +2826,22 @@ static const struct clksel atclk_emu_clksel[] = {
 
 static struct clk atclk_fck = {
 	.name		= "atclk_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
 	.clksel		= atclk_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk traceclk_src_fck = {
 	.name		= "traceclk_src_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2961,11 +2860,11 @@ static const struct clksel traceclk_clksel[] = {
 
 static struct clk traceclk_fck = {
 	.name		= "traceclk_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
 	.clksel		= traceclk_clksel,
-	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2975,27 +2874,27 @@ static struct clk traceclk_fck = {
 /* SmartReflex fclk (VDD1) */
 static struct clk sr1_fck = {
 	.name		= "sr1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
 /* SmartReflex fclk (VDD2) */
 static struct clk sr2_fck = {
 	.name		= "sr2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk sr_l4_ick = {
 	.name		= "sr_l4_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -3005,231 +2904,16 @@ static struct clk sr_l4_ick = {
 /* XXX This clock no longer exists in 3430 TRM rev F */
 static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
+	.ops		= &clkops_null,
 	.parent		= &secure_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk wdt1_fck = {
 	.name		= "wdt1_fck",
+	.ops		= &clkops_null,
 	.parent		= &secure_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk *onchip_34xx_clks[] __initdata = {
-	&omap_32k_fck,
-	&virt_12m_ck,
-	&virt_13m_ck,
-	&virt_16_8m_ck,
-	&virt_19_2m_ck,
-	&virt_26m_ck,
-	&virt_38_4m_ck,
-	&osc_sys_ck,
-	&sys_ck,
-	&sys_altclk,
-	&mcbsp_clks,
-	&sys_clkout1,
-	&dpll1_ck,
-	&dpll1_x2_ck,
-	&dpll1_x2m2_ck,
-	&dpll2_ck,
-	&dpll2_m2_ck,
-	&dpll3_ck,
-	&core_ck,
-	&dpll3_x2_ck,
-	&dpll3_m2_ck,
-	&dpll3_m2x2_ck,
-	&dpll3_m3_ck,
-	&dpll3_m3x2_ck,
-	&emu_core_alwon_ck,
-	&dpll4_ck,
-	&dpll4_x2_ck,
-	&omap_96m_alwon_fck,
-	&omap_96m_fck,
-	&cm_96m_fck,
-	&virt_omap_54m_fck,
-	&omap_54m_fck,
-	&omap_48m_fck,
-	&omap_12m_fck,
-	&dpll4_m2_ck,
-	&dpll4_m2x2_ck,
-	&dpll4_m3_ck,
-	&dpll4_m3x2_ck,
-	&dpll4_m4_ck,
-	&dpll4_m4x2_ck,
-	&dpll4_m5_ck,
-	&dpll4_m5x2_ck,
-	&dpll4_m6_ck,
-	&dpll4_m6x2_ck,
-	&emu_per_alwon_ck,
-	&dpll5_ck,
-	&dpll5_m2_ck,
-	&omap_120m_fck,
-	&clkout2_src_ck,
-	&sys_clkout2,
-	&corex2_fck,
-	&dpll1_fck,
-	&mpu_ck,
-	&arm_fck,
-	&emu_mpu_alwon_ck,
-	&dpll2_fck,
-	&iva2_ck,
-	&l3_ick,
-	&l4_ick,
-	&rm_ick,
-	&gfx_l3_ck,
-	&gfx_l3_fck,
-	&gfx_l3_ick,
-	&gfx_cg1_ck,
-	&gfx_cg2_ck,
-	&sgx_fck,
-	&sgx_ick,
-	&d2d_26m_fck,
-	&gpt10_fck,
-	&gpt11_fck,
-	&cpefuse_fck,
-	&ts_fck,
-	&usbtll_fck,
-	&core_96m_fck,
-	&mmchs3_fck,
-	&mmchs2_fck,
-	&mspro_fck,
-	&mmchs1_fck,
-	&i2c3_fck,
-	&i2c2_fck,
-	&i2c1_fck,
-	&mcbsp5_fck,
-	&mcbsp1_fck,
-	&core_48m_fck,
-	&mcspi4_fck,
-	&mcspi3_fck,
-	&mcspi2_fck,
-	&mcspi1_fck,
-	&uart2_fck,
-	&uart1_fck,
-	&fshostusb_fck,
-	&core_12m_fck,
-	&hdq_fck,
-	&ssi_ssr_fck,
-	&ssi_sst_fck,
-	&core_l3_ick,
-	&hsotgusb_ick,
-	&sdrc_ick,
-	&gpmc_fck,
-	&security_l3_ick,
-	&pka_ick,
-	&core_l4_ick,
-	&usbtll_ick,
-	&mmchs3_ick,
-	&icr_ick,
-	&aes2_ick,
-	&sha12_ick,
-	&des2_ick,
-	&mmchs2_ick,
-	&mmchs1_ick,
-	&mspro_ick,
-	&hdq_ick,
-	&mcspi4_ick,
-	&mcspi3_ick,
-	&mcspi2_ick,
-	&mcspi1_ick,
-	&i2c3_ick,
-	&i2c2_ick,
-	&i2c1_ick,
-	&uart2_ick,
-	&uart1_ick,
-	&gpt11_ick,
-	&gpt10_ick,
-	&mcbsp5_ick,
-	&mcbsp1_ick,
-	&fac_ick,
-	&mailboxes_ick,
-	&omapctrl_ick,
-	&ssi_l4_ick,
-	&ssi_ick,
-	&usb_l4_ick,
-	&security_l4_ick2,
-	&aes1_ick,
-	&rng_ick,
-	&sha11_ick,
-	&des1_ick,
-	&dss1_alwon_fck,
-	&dss_tv_fck,
-	&dss_96m_fck,
-	&dss2_alwon_fck,
-	&dss_ick,
-	&cam_mclk,
-	&cam_ick,
-	&usbhost_120m_fck,
-	&usbhost_48m_fck,
-	&usbhost_ick,
-	&usbhost_sar_fck,
-	&usim_fck,
-	&gpt1_fck,
-	&wkup_32k_fck,
-	&gpio1_dbck,
-	&wdt2_fck,
-	&wkup_l4_ick,
-	&usim_ick,
-	&wdt2_ick,
-	&wdt1_ick,
-	&gpio1_ick,
-	&omap_32ksync_ick,
-	&gpt12_ick,
-	&gpt1_ick,
-	&per_96m_fck,
-	&per_48m_fck,
-	&uart3_fck,
-	&gpt2_fck,
-	&gpt3_fck,
-	&gpt4_fck,
-	&gpt5_fck,
-	&gpt6_fck,
-	&gpt7_fck,
-	&gpt8_fck,
-	&gpt9_fck,
-	&per_32k_alwon_fck,
-	&gpio6_dbck,
-	&gpio5_dbck,
-	&gpio4_dbck,
-	&gpio3_dbck,
-	&gpio2_dbck,
-	&wdt3_fck,
-	&per_l4_ick,
-	&gpio6_ick,
-	&gpio5_ick,
-	&gpio4_ick,
-	&gpio3_ick,
-	&gpio2_ick,
-	&wdt3_ick,
-	&uart3_ick,
-	&gpt9_ick,
-	&gpt8_ick,
-	&gpt7_ick,
-	&gpt6_ick,
-	&gpt5_ick,
-	&gpt4_ick,
-	&gpt3_ick,
-	&gpt2_ick,
-	&mcbsp2_ick,
-	&mcbsp3_ick,
-	&mcbsp4_ick,
-	&mcbsp2_fck,
-	&mcbsp3_fck,
-	&mcbsp4_fck,
-	&emu_src_ck,
-	&pclk_fck,
-	&pclkx2_fck,
-	&atclk_fck,
-	&traceclk_src_fck,
-	&traceclk_fck,
-	&sr1_fck,
-	&sr2_fck,
-	&sr_l4_ick,
-	&secure_32k_fck,
-	&gpt12_fck,
-	&wdt1_fck,
+	.recalc		= &followparent_recalc,
 };
 
 #endif
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 4c3ce9cfd94..0e7d501865b 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/limits.h>
+#include <linux/err.h>
 
 #include <linux/io.h>
 
@@ -71,16 +72,13 @@ static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
 	if (!omap_chip_is(autodep->omap_chip))
 		return;
 
-	pwrdm = pwrdm_lookup(autodep->pwrdm_name);
+	pwrdm = pwrdm_lookup(autodep->pwrdm.name);
 	if (!pwrdm) {
-		pr_debug("clockdomain: _autodep_lookup: powerdomain %s "
-			 "does not exist\n", autodep->pwrdm_name);
-		WARN_ON(1);
-		return;
+		pr_err("clockdomain: autodeps: powerdomain %s does not exist\n",
+			 autodep->pwrdm.name);
+		pwrdm = ERR_PTR(-ENOENT);
 	}
-	autodep->pwrdm = pwrdm;
-
-	return;
+	autodep->pwrdm.ptr = pwrdm;
 }
 
 /*
@@ -95,16 +93,19 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm)
 {
 	struct clkdm_pwrdm_autodep *autodep;
 
-	for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
-		if (!autodep->pwrdm)
+	for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
+		if (IS_ERR(autodep->pwrdm.ptr))
+			continue;
+
+		if (!omap_chip_is(autodep->omap_chip))
 			continue;
 
 		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
-			 "pwrdm %s\n", autodep->pwrdm_name,
-			 clkdm->pwrdm->name);
+			 "pwrdm %s\n", autodep->pwrdm.ptr->name,
+			 clkdm->pwrdm.ptr->name);
 
-		pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm);
-		pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm);
+		pwrdm_add_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+		pwrdm_add_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
 	}
 }
 
@@ -120,16 +121,19 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
 {
 	struct clkdm_pwrdm_autodep *autodep;
 
-	for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
-		if (!autodep->pwrdm)
+	for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
+		if (IS_ERR(autodep->pwrdm.ptr))
+			continue;
+
+		if (!omap_chip_is(autodep->omap_chip))
 			continue;
 
 		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
-			 "pwrdm %s\n", autodep->pwrdm_name,
-			 clkdm->pwrdm->name);
+			 "pwrdm %s\n", autodep->pwrdm.ptr->name,
+			 clkdm->pwrdm.ptr->name);
 
-		pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm);
-		pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm);
+		pwrdm_del_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+		pwrdm_del_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
 	}
 }
 
@@ -179,7 +183,7 @@ void clkdm_init(struct clockdomain **clkdms,
 
 	autodeps = init_autodeps;
 	if (autodeps)
-		for (autodep = autodeps; autodep->pwrdm_name; autodep++)
+		for (autodep = autodeps; autodep->pwrdm.ptr; autodep++)
 			_autodep_lookup(autodep);
 }
 
@@ -202,20 +206,20 @@ int clkdm_register(struct clockdomain *clkdm)
 	if (!omap_chip_is(clkdm->omap_chip))
 		return -EINVAL;
 
-	pwrdm = pwrdm_lookup(clkdm->pwrdm_name);
+	pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
 	if (!pwrdm) {
-		pr_debug("clockdomain: clkdm_register %s: powerdomain %s "
-			 "does not exist\n", clkdm->name, clkdm->pwrdm_name);
+		pr_err("clockdomain: %s: powerdomain %s does not exist\n",
+			clkdm->name, clkdm->pwrdm.name);
 		return -EINVAL;
 	}
-	clkdm->pwrdm = pwrdm;
+	clkdm->pwrdm.ptr = pwrdm;
 
 	mutex_lock(&clkdm_mutex);
 	/* Verify that the clockdomain is not already registered */
 	if (_clkdm_lookup(clkdm->name)) {
 		ret = -EEXIST;
 		goto cr_unlock;
-	};
+	}
 
 	list_add(&clkdm->node, &clkdm_list);
 
@@ -242,7 +246,7 @@ int clkdm_unregister(struct clockdomain *clkdm)
 	if (!clkdm)
 		return -EINVAL;
 
-	pwrdm_del_clkdm(clkdm->pwrdm, clkdm);
+	pwrdm_del_clkdm(clkdm->pwrdm.ptr, clkdm);
 
 	mutex_lock(&clkdm_mutex);
 	list_del(&clkdm->node);
@@ -327,7 +331,7 @@ struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
 	if (!clkdm)
 		return NULL;
 
-	return clkdm->pwrdm;
+	return clkdm->pwrdm.ptr;
 }
 
 
@@ -348,7 +352,7 @@ static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
 	if (!clkdm)
 		return -EINVAL;
 
-	v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+	v = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
 	v &= clkdm->clktrctrl_mask;
 	v >>= __ffs(clkdm->clktrctrl_mask);
 
@@ -380,7 +384,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
 	if (cpu_is_omap24xx()) {
 
 		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
-				    clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+				    clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
 
 	} else if (cpu_is_omap34xx()) {
 
@@ -388,7 +392,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
 			 __ffs(clkdm->clktrctrl_mask));
 
 		cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
-				    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+				    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
 
 	} else {
 		BUG();
@@ -422,7 +426,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
 	if (cpu_is_omap24xx()) {
 
 		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
-				      clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+				      clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
 
 	} else if (cpu_is_omap34xx()) {
 
@@ -430,7 +434,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
 			 __ffs(clkdm->clktrctrl_mask));
 
 		cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
-				    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+				    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
 
 	} else {
 		BUG();
@@ -478,7 +482,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 
 	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
 			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm->prcm_offs,
+			    clkdm->pwrdm.ptr->prcm_offs,
 			    CM_CLKSTCTRL);
 }
 
@@ -516,7 +520,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 
 	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
 			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+			    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
 
 	if (atomic_read(&clkdm->usecount) > 0)
 		_clkdm_del_autodeps(clkdm);
@@ -567,6 +571,8 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	else
 		omap2_clkdm_wakeup(clkdm);
 
+	pwrdm_wait_transition(clkdm->pwrdm.ptr);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index cd86dcc7b42..281d5da1918 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -14,12 +14,29 @@
 
 /*
  * OMAP2/3-common clockdomains
+ *
+ * Even though the 2420 has a single PRCM module from the
+ * interconnect's perspective, internally it does appear to have
+ * separate PRM and CM clockdomains.  The usual test case is
+ * sys_clkout/sys_clkout2.
  */
 
 /* This is an implicit clockdomain - it is never defined as such in TRM */
 static struct clockdomain wkup_clkdm = {
 	.name		= "wkup_clkdm",
-	.pwrdm_name	= "wkup_pwrdm",
+	.pwrdm		= { .name = "wkup_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain prm_clkdm = {
+	.name		= "prm_clkdm",
+	.pwrdm		= { .name = "wkup_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain cm_clkdm = {
+	.name		= "cm_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
 
@@ -31,7 +48,7 @@ static struct clockdomain wkup_clkdm = {
 
 static struct clockdomain mpu_2420_clkdm = {
 	.name		= "mpu_clkdm",
-	.pwrdm_name	= "mpu_pwrdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -39,7 +56,7 @@ static struct clockdomain mpu_2420_clkdm = {
 
 static struct clockdomain iva1_2420_clkdm = {
 	.name		= "iva1_clkdm",
-	.pwrdm_name	= "dsp_pwrdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -56,7 +73,7 @@ static struct clockdomain iva1_2420_clkdm = {
 
 static struct clockdomain mpu_2430_clkdm = {
 	.name		= "mpu_clkdm",
-	.pwrdm_name	= "mpu_pwrdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -64,7 +81,7 @@ static struct clockdomain mpu_2430_clkdm = {
 
 static struct clockdomain mdm_clkdm = {
 	.name		= "mdm_clkdm",
-	.pwrdm_name	= "mdm_pwrdm",
+	.pwrdm		= { .name = "mdm_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -81,7 +98,7 @@ static struct clockdomain mdm_clkdm = {
 
 static struct clockdomain dsp_clkdm = {
 	.name		= "dsp_clkdm",
-	.pwrdm_name	= "dsp_pwrdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -89,7 +106,7 @@ static struct clockdomain dsp_clkdm = {
 
 static struct clockdomain gfx_24xx_clkdm = {
 	.name		= "gfx_clkdm",
-	.pwrdm_name	= "gfx_pwrdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -97,7 +114,7 @@ static struct clockdomain gfx_24xx_clkdm = {
 
 static struct clockdomain core_l3_24xx_clkdm = {
 	.name		= "core_l3_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -105,7 +122,7 @@ static struct clockdomain core_l3_24xx_clkdm = {
 
 static struct clockdomain core_l4_24xx_clkdm = {
 	.name		= "core_l4_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -113,7 +130,7 @@ static struct clockdomain core_l4_24xx_clkdm = {
 
 static struct clockdomain dss_24xx_clkdm = {
 	.name		= "dss_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -130,7 +147,7 @@ static struct clockdomain dss_24xx_clkdm = {
 
 static struct clockdomain mpu_34xx_clkdm = {
 	.name		= "mpu_clkdm",
-	.pwrdm_name	= "mpu_pwrdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -138,7 +155,7 @@ static struct clockdomain mpu_34xx_clkdm = {
 
 static struct clockdomain neon_clkdm = {
 	.name		= "neon_clkdm",
-	.pwrdm_name	= "neon_pwrdm",
+	.pwrdm		= { .name = "neon_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -146,7 +163,7 @@ static struct clockdomain neon_clkdm = {
 
 static struct clockdomain iva2_clkdm = {
 	.name		= "iva2_clkdm",
-	.pwrdm_name	= "iva2_pwrdm",
+	.pwrdm		= { .name = "iva2_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -154,7 +171,7 @@ static struct clockdomain iva2_clkdm = {
 
 static struct clockdomain gfx_3430es1_clkdm = {
 	.name		= "gfx_clkdm",
-	.pwrdm_name	= "gfx_pwrdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
@@ -162,10 +179,10 @@ static struct clockdomain gfx_3430es1_clkdm = {
 
 static struct clockdomain sgx_clkdm = {
 	.name		= "sgx_clkdm",
-	.pwrdm_name	= "sgx_pwrdm",
+	.pwrdm		= { .name = "sgx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
 /*
@@ -177,7 +194,7 @@ static struct clockdomain sgx_clkdm = {
  */
 static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -185,7 +202,7 @@ static struct clockdomain d2d_clkdm = {
 
 static struct clockdomain core_l3_34xx_clkdm = {
 	.name		= "core_l3_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -193,7 +210,7 @@ static struct clockdomain core_l3_34xx_clkdm = {
 
 static struct clockdomain core_l4_34xx_clkdm = {
 	.name		= "core_l4_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -201,7 +218,7 @@ static struct clockdomain core_l4_34xx_clkdm = {
 
 static struct clockdomain dss_34xx_clkdm = {
 	.name		= "dss_clkdm",
-	.pwrdm_name	= "dss_pwrdm",
+	.pwrdm		= { .name = "dss_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -209,7 +226,7 @@ static struct clockdomain dss_34xx_clkdm = {
 
 static struct clockdomain cam_clkdm = {
 	.name		= "cam_clkdm",
-	.pwrdm_name	= "cam_pwrdm",
+	.pwrdm		= { .name = "cam_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -217,28 +234,62 @@ static struct clockdomain cam_clkdm = {
 
 static struct clockdomain usbhost_clkdm = {
 	.name		= "usbhost_clkdm",
-	.pwrdm_name	= "usbhost_pwrdm",
+	.pwrdm		= { .name = "usbhost_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
 static struct clockdomain per_clkdm = {
 	.name		= "per_clkdm",
-	.pwrdm_name	= "per_pwrdm",
+	.pwrdm		= { .name = "per_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
 static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
-	.pwrdm_name	= "emu_pwrdm",
-	.flags		= CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP,
+	.pwrdm		= { .name = "emu_pwrdm" },
+	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+static struct clockdomain dpll1_clkdm = {
+	.name		= "dpll1_clkdm",
+	.pwrdm		= { .name = "dpll1_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll2_clkdm = {
+	.name		= "dpll2_clkdm",
+	.pwrdm		= { .name = "dpll2_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll3_clkdm = {
+	.name		= "dpll3_clkdm",
+	.pwrdm		= { .name = "dpll3_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll4_clkdm = {
+	.name		= "dpll4_clkdm",
+	.pwrdm		= { .name = "dpll4_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll5_clkdm = {
+	.name		= "dpll5_clkdm",
+	.pwrdm		= { .name = "dpll5_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+};
+
 #endif   /* CONFIG_ARCH_OMAP34XX */
 
 /*
@@ -247,14 +298,16 @@ static struct clockdomain emu_clkdm = {
 
 static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
 	{
-		.pwrdm_name = "mpu_pwrdm",
+		.pwrdm	   = { .name = "mpu_pwrdm" },
 		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
 	},
 	{
-		.pwrdm_name = "iva2_pwrdm",
+		.pwrdm	   = { .name = "iva2_pwrdm" },
 		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
 	},
-	{ NULL }
+	{
+		.pwrdm	   = { .name = NULL },
+	}
 };
 
 /*
@@ -264,6 +317,8 @@ static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
 static struct clockdomain *clockdomains_omap[] = {
 
 	&wkup_clkdm,
+	&cm_clkdm,
+	&prm_clkdm,
 
 #ifdef CONFIG_ARCH_OMAP2420
 	&mpu_2420_clkdm,
@@ -297,6 +352,11 @@ static struct clockdomain *clockdomains_omap[] = {
 	&usbhost_clkdm,
 	&per_clkdm,
 	&emu_clkdm,
+	&dpll1_clkdm,
+	&dpll2_clkdm,
+	&dpll3_clkdm,
+	&dpll4_clkdm,
+	&dpll5_clkdm,
 #endif
 
 	NULL,
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 1098ecfab86..297a2fe634e 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -110,35 +110,56 @@
 #define OMAP24XX_EN_DES					(1 << 0)
 
 /* CM_IDLEST1_CORE specific bits */
-#define OMAP24XX_ST_MAILBOXES				(1 << 30)
-#define OMAP24XX_ST_WDT4				(1 << 29)
-#define OMAP2420_ST_WDT3				(1 << 28)
-#define OMAP24XX_ST_MSPRO				(1 << 27)
-#define OMAP24XX_ST_FAC					(1 << 25)
-#define OMAP2420_ST_EAC					(1 << 24)
-#define OMAP24XX_ST_HDQ					(1 << 23)
-#define OMAP24XX_ST_I2C2				(1 << 20)
-#define OMAP24XX_ST_I2C1				(1 << 19)
-#define OMAP24XX_ST_MCBSP2				(1 << 16)
-#define OMAP24XX_ST_MCBSP1				(1 << 15)
-#define OMAP24XX_ST_DSS					(1 << 0)
+#define OMAP24XX_ST_MAILBOXES_SHIFT			30
+#define OMAP24XX_ST_MAILBOXES_MASK			(1 << 30)
+#define OMAP24XX_ST_WDT4_SHIFT				29
+#define OMAP24XX_ST_WDT4_MASK				(1 << 29)
+#define OMAP2420_ST_WDT3_SHIFT				28
+#define OMAP2420_ST_WDT3_MASK				(1 << 28)
+#define OMAP24XX_ST_MSPRO_SHIFT				27
+#define OMAP24XX_ST_MSPRO_MASK				(1 << 27)
+#define OMAP24XX_ST_FAC_SHIFT				25
+#define OMAP24XX_ST_FAC_MASK				(1 << 25)
+#define OMAP2420_ST_EAC_SHIFT				24
+#define OMAP2420_ST_EAC_MASK				(1 << 24)
+#define OMAP24XX_ST_HDQ_SHIFT				23
+#define OMAP24XX_ST_HDQ_MASK				(1 << 23)
+#define OMAP2420_ST_I2C2_SHIFT				20
+#define OMAP2420_ST_I2C2_MASK				(1 << 20)
+#define OMAP2420_ST_I2C1_SHIFT				19
+#define OMAP2420_ST_I2C1_MASK				(1 << 19)
+#define OMAP24XX_ST_MCBSP2_SHIFT			16
+#define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)
+#define OMAP24XX_ST_MCBSP1_SHIFT			15
+#define OMAP24XX_ST_MCBSP1_MASK				(1 << 15)
+#define OMAP24XX_ST_DSS_SHIFT				0
+#define OMAP24XX_ST_DSS_MASK				(1 << 0)
 
 /* CM_IDLEST2_CORE */
-#define OMAP2430_ST_MCBSP5				(1 << 5)
-#define OMAP2430_ST_MCBSP4				(1 << 4)
-#define OMAP2430_ST_MCBSP3				(1 << 3)
-#define OMAP24XX_ST_SSI					(1 << 1)
+#define OMAP2430_ST_MCBSP5_SHIFT			5
+#define OMAP2430_ST_MCBSP5_MASK				(1 << 5)
+#define OMAP2430_ST_MCBSP4_SHIFT				4
+#define OMAP2430_ST_MCBSP4_MASK				(1 << 4)
+#define OMAP2430_ST_MCBSP3_SHIFT				3
+#define OMAP2430_ST_MCBSP3_MASK				(1 << 3)
+#define OMAP24XX_ST_SSI_SHIFT				1
+#define OMAP24XX_ST_SSI_MASK				(1 << 1)
 
 /* CM_IDLEST3_CORE */
 /* 2430 only */
-#define OMAP2430_ST_SDRC				(1 << 2)
+#define OMAP2430_ST_SDRC_MASK				(1 << 2)
 
 /* CM_IDLEST4_CORE */
-#define OMAP24XX_ST_PKA					(1 << 4)
-#define OMAP24XX_ST_AES					(1 << 3)
-#define OMAP24XX_ST_RNG					(1 << 2)
-#define OMAP24XX_ST_SHA					(1 << 1)
-#define OMAP24XX_ST_DES					(1 << 0)
+#define OMAP24XX_ST_PKA_SHIFT				4
+#define OMAP24XX_ST_PKA_MASK				(1 << 4)
+#define OMAP24XX_ST_AES_SHIFT				3
+#define OMAP24XX_ST_AES_MASK				(1 << 3)
+#define OMAP24XX_ST_RNG_SHIFT				2
+#define OMAP24XX_ST_RNG_MASK				(1 << 2)
+#define OMAP24XX_ST_SHA_SHIFT				1
+#define OMAP24XX_ST_SHA_MASK				(1 << 1)
+#define OMAP24XX_ST_DES_SHIFT				0
+#define OMAP24XX_ST_DES_MASK				(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
 #define OMAP24XX_AUTO_CAM				(1 << 31)
@@ -275,11 +296,16 @@
 #define OMAP24XX_EN_32KSYNC				(1 << 1)
 
 /* CM_IDLEST_WKUP specific bits */
-#define OMAP2430_ST_ICR					(1 << 6)
-#define OMAP24XX_ST_OMAPCTRL				(1 << 5)
-#define OMAP24XX_ST_WDT1				(1 << 4)
-#define OMAP24XX_ST_MPU_WDT				(1 << 3)
-#define OMAP24XX_ST_32KSYNC				(1 << 1)
+#define OMAP2430_ST_ICR_SHIFT				6
+#define OMAP2430_ST_ICR_MASK				(1 << 6)
+#define OMAP24XX_ST_OMAPCTRL_SHIFT			5
+#define OMAP24XX_ST_OMAPCTRL_MASK			(1 << 5)
+#define OMAP24XX_ST_WDT1_SHIFT				4
+#define OMAP24XX_ST_WDT1_MASK				(1 << 4)
+#define OMAP24XX_ST_MPU_WDT_SHIFT			3
+#define OMAP24XX_ST_MPU_WDT_MASK			(1 << 3)
+#define OMAP24XX_ST_32KSYNC_SHIFT			1
+#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
 
 /* CM_AUTOIDLE_WKUP */
 #define OMAP24XX_AUTO_OMAPCTRL				(1 << 5)
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 219f5c8d965..6f3f5a36aae 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -183,31 +183,58 @@
 #define OMAP3430ES2_EN_CPEFUSE_MASK			(1 << 0)
 
 /* CM_IDLEST1_CORE specific bits */
-#define OMAP3430_ST_ICR					(1 << 29)
-#define OMAP3430_ST_AES2				(1 << 28)
-#define OMAP3430_ST_SHA12				(1 << 27)
-#define OMAP3430_ST_DES2				(1 << 26)
-#define OMAP3430_ST_MSPRO				(1 << 23)
-#define OMAP3430_ST_HDQ					(1 << 22)
-#define OMAP3430ES1_ST_FAC				(1 << 8)
-#define OMAP3430ES1_ST_MAILBOXES			(1 << 7)
-#define OMAP3430_ST_OMAPCTRL				(1 << 6)
-#define OMAP3430_ST_SDMA				(1 << 2)
-#define OMAP3430_ST_SDRC				(1 << 1)
-#define OMAP3430_ST_SSI					(1 << 0)
+#define OMAP3430ES2_ST_MMC3_SHIFT			30
+#define OMAP3430ES2_ST_MMC3_MASK			(1 << 30)
+#define OMAP3430_ST_ICR_SHIFT				29
+#define OMAP3430_ST_ICR_MASK				(1 << 29)
+#define OMAP3430_ST_AES2_SHIFT				28
+#define OMAP3430_ST_AES2_MASK				(1 << 28)
+#define OMAP3430_ST_SHA12_SHIFT				27
+#define OMAP3430_ST_SHA12_MASK				(1 << 27)
+#define OMAP3430_ST_DES2_SHIFT				26
+#define OMAP3430_ST_DES2_MASK				(1 << 26)
+#define OMAP3430_ST_MSPRO_SHIFT				23
+#define OMAP3430_ST_MSPRO_MASK				(1 << 23)
+#define OMAP3430_ST_HDQ_SHIFT				22
+#define OMAP3430_ST_HDQ_MASK				(1 << 22)
+#define OMAP3430ES1_ST_FAC_SHIFT			8
+#define OMAP3430ES1_ST_FAC_MASK				(1 << 8)
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT			8
+#define OMAP3430ES2_ST_SSI_IDLE_MASK			(1 << 8)
+#define OMAP3430_ST_MAILBOXES_SHIFT			7
+#define OMAP3430_ST_MAILBOXES_MASK			(1 << 7)
+#define OMAP3430_ST_OMAPCTRL_SHIFT			6
+#define OMAP3430_ST_OMAPCTRL_MASK			(1 << 6)
+#define OMAP3430_ST_SDMA_SHIFT				2
+#define OMAP3430_ST_SDMA_MASK				(1 << 2)
+#define OMAP3430_ST_SDRC_SHIFT				1
+#define OMAP3430_ST_SDRC_MASK				(1 << 1)
+#define OMAP3430_ST_SSI_STDBY_SHIFT			0
+#define OMAP3430_ST_SSI_STDBY_MASK			(1 << 0)
 
 /* CM_IDLEST2_CORE */
-#define OMAP3430_ST_PKA					(1 << 4)
-#define OMAP3430_ST_AES1				(1 << 3)
-#define OMAP3430_ST_RNG					(1 << 2)
-#define OMAP3430_ST_SHA11				(1 << 1)
-#define OMAP3430_ST_DES1				(1 << 0)
+#define OMAP3430_ST_PKA_SHIFT				4
+#define OMAP3430_ST_PKA_MASK				(1 << 4)
+#define OMAP3430_ST_AES1_SHIFT				3
+#define OMAP3430_ST_AES1_MASK				(1 << 3)
+#define OMAP3430_ST_RNG_SHIFT				2
+#define OMAP3430_ST_RNG_MASK				(1 << 2)
+#define OMAP3430_ST_SHA11_SHIFT				1
+#define OMAP3430_ST_SHA11_MASK				(1 << 1)
+#define OMAP3430_ST_DES1_SHIFT				0
+#define OMAP3430_ST_DES1_MASK				(1 << 0)
 
 /* CM_IDLEST3_CORE */
 #define OMAP3430ES2_ST_USBTLL_SHIFT			2
 #define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
+#define OMAP3430ES2_ST_CPEFUSE_SHIFT			0
+#define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
+#define OMAP3430ES2_AUTO_MMC3				(1 << 30)
+#define OMAP3430ES2_AUTO_MMC3_SHIFT			30
+#define OMAP3430ES2_AUTO_ICR				(1 << 29)
+#define OMAP3430ES2_AUTO_ICR_SHIFT			29
 #define OMAP3430_AUTO_AES2				(1 << 28)
 #define OMAP3430_AUTO_AES2_SHIFT			28
 #define OMAP3430_AUTO_SHA12				(1 << 27)
@@ -276,6 +303,9 @@
 #define OMAP3430_AUTO_DES1_SHIFT			0
 
 /* CM_AUTOIDLE3_CORE */
+#define	OMAP3430ES2_AUTO_USBHOST			(1 << 0)
+#define	OMAP3430ES2_AUTO_USBHOST_SHIFT			0
+#define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
 
@@ -332,8 +362,12 @@
 #define OMAP3430ES1_CLKACTIVITY_GFX_MASK		(1 << 0)
 
 /* CM_FCLKEN_SGX */
-#define OMAP3430ES2_EN_SGX_SHIFT			1
-#define OMAP3430ES2_EN_SGX_MASK				(1 << 1)
+#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT		1
+#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK		(1 << 1)
+
+/* CM_ICLKEN_SGX */
+#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT		0
+#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK		(1 << 0)
 
 /* CM_CLKSEL_SGX */
 #define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
@@ -349,6 +383,7 @@
 
 /* CM_FCLKEN_WKUP specific bits */
 #define OMAP3430ES2_EN_USIMOCP_SHIFT			9
+#define OMAP3430ES2_EN_USIMOCP_MASK			(1 << 9)
 
 /* CM_ICLKEN_WKUP specific bits */
 #define OMAP3430_EN_WDT1				(1 << 4)
@@ -357,11 +392,18 @@
 #define OMAP3430_EN_32KSYNC_SHIFT			2
 
 /* CM_IDLEST_WKUP specific bits */
-#define OMAP3430_ST_WDT2				(1 << 5)
-#define OMAP3430_ST_WDT1				(1 << 4)
-#define OMAP3430_ST_32KSYNC				(1 << 2)
+#define OMAP3430ES2_ST_USIMOCP_SHIFT			9
+#define OMAP3430ES2_ST_USIMOCP_MASK			(1 << 9)
+#define OMAP3430_ST_WDT2_SHIFT				5
+#define OMAP3430_ST_WDT2_MASK				(1 << 5)
+#define OMAP3430_ST_WDT1_SHIFT				4
+#define OMAP3430_ST_WDT1_MASK				(1 << 4)
+#define OMAP3430_ST_32KSYNC_SHIFT			2
+#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
 
 /* CM_AUTOIDLE_WKUP */
+#define OMAP3430ES2_AUTO_USIMOCP				(1 << 9)
+#define OMAP3430ES2_AUTO_USIMOCP_SHIFT			9
 #define OMAP3430_AUTO_WDT2				(1 << 5)
 #define OMAP3430_AUTO_WDT2_SHIFT			5
 #define OMAP3430_AUTO_WDT1				(1 << 4)
@@ -426,6 +468,8 @@
 #define OMAP3430_ST_CORE_CLK_MASK			(1 << 0)
 
 /* CM_IDLEST2_CKGEN */
+#define OMAP3430ES2_ST_USIM_CLK_SHIFT			2
+#define OMAP3430ES2_ST_USIM_CLK_MASK			(1 << 2)
 #define OMAP3430ES2_ST_120M_CLK_SHIFT			1
 #define OMAP3430ES2_ST_120M_CLK_MASK			(1 << 1)
 #define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT		0
@@ -449,8 +493,12 @@
 #define OMAP3430_CORE_DPLL_MULT_MASK			(0x7ff << 16)
 #define OMAP3430_CORE_DPLL_DIV_SHIFT			8
 #define OMAP3430_CORE_DPLL_DIV_MASK			(0x7f << 8)
-#define OMAP3430_SOURCE_54M				(1 << 5)
-#define OMAP3430_SOURCE_48M				(1 << 3)
+#define OMAP3430_SOURCE_96M_SHIFT			6
+#define OMAP3430_SOURCE_96M_MASK			(1 << 6)
+#define OMAP3430_SOURCE_54M_SHIFT			5
+#define OMAP3430_SOURCE_54M_MASK			(1 << 5)
+#define OMAP3430_SOURCE_48M_SHIFT			3
+#define OMAP3430_SOURCE_48M_MASK			(1 << 3)
 
 /* CM_CLKSEL2_PLL */
 #define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
@@ -493,7 +541,12 @@
 #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
 
 /* CM_IDLEST_DSS */
-#define OMAP3430_ST_DSS					(1 << 0)
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT			1
+#define OMAP3430ES2_ST_DSS_IDLE_MASK			(1 << 1)
+#define OMAP3430ES2_ST_DSS_STDBY_SHIFT			0
+#define OMAP3430ES2_ST_DSS_STDBY_MASK			(1 << 0)
+#define OMAP3430ES1_ST_DSS_SHIFT			0
+#define OMAP3430ES1_ST_DSS_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_DSS */
 #define OMAP3430_AUTO_DSS				(1 << 0)
@@ -516,6 +569,8 @@
 #define OMAP3430_CLKACTIVITY_DSS_MASK			(1 << 0)
 
 /* CM_FCLKEN_CAM specific bits */
+#define OMAP3430_EN_CSI2				(1 << 1)
+#define OMAP3430_EN_CSI2_SHIFT				1
 
 /* CM_ICLKEN_CAM specific bits */
 
@@ -545,10 +600,14 @@
 /* CM_ICLKEN_PER specific bits */
 
 /* CM_IDLEST_PER */
-#define OMAP3430_ST_WDT3				(1 << 12)
-#define OMAP3430_ST_MCBSP4				(1 << 2)
-#define OMAP3430_ST_MCBSP3				(1 << 1)
-#define OMAP3430_ST_MCBSP2				(1 << 0)
+#define OMAP3430_ST_WDT3_SHIFT				12
+#define OMAP3430_ST_WDT3_MASK				(1 << 12)
+#define OMAP3430_ST_MCBSP4_SHIFT			2
+#define OMAP3430_ST_MCBSP4_MASK				(1 << 2)
+#define OMAP3430_ST_MCBSP3_SHIFT			1
+#define OMAP3430_ST_MCBSP3_MASK				(1 << 1)
+#define OMAP3430_ST_MCBSP2_SHIFT			0
+#define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_PER */
 #define OMAP3430_AUTO_GPIO6				(1 << 17)
@@ -676,6 +735,10 @@
 #define OMAP3430ES2_EN_USBHOST_MASK			(1 << 0)
 
 /* CM_IDLEST_USBHOST */
+#define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT		1
+#define OMAP3430ES2_ST_USBHOST_IDLE_MASK		(1 << 1)
+#define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT		0
+#define OMAP3430ES2_ST_USBHOST_STDBY_MASK		(1 << 0)
 
 /* CM_AUTOIDLE_USBHOST */
 #define OMAP3430ES2_AUTO_USBHOST_SHIFT			0
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index ce03fa75077..d6b4b2f8722 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -28,13 +28,121 @@
 #include <mach/eac.h>
 #include <mach/mmc.h>
 
-#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#define OMAP2_MBOX_BASE		IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
-static struct resource mbox_resources[] = {
+static struct resource cam_resources[] = {
 	{
-		.start		= OMAP2_MBOX_BASE,
-		.end		= OMAP2_MBOX_BASE + 0x11f,
+		.start		= OMAP24XX_CAMERA_BASE,
+		.end		= OMAP24XX_CAMERA_BASE + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_24XX_CAM_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device omap_cam_device = {
+	.name		= "omap24xxcam",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cam_resources),
+	.resource	= cam_resources,
+};
+
+static inline void omap_init_camera(void)
+{
+	platform_device_register(&omap_cam_device);
+}
+
+#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+
+static struct resource omap3isp_resources[] = {
+	{
+		.start		= OMAP3430_ISP_BASE,
+		.end		= OMAP3430_ISP_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CBUFF_BASE,
+		.end		= OMAP3430_ISP_CBUFF_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CCP2_BASE,
+		.end		= OMAP3430_ISP_CCP2_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CCDC_BASE,
+		.end		= OMAP3430_ISP_CCDC_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_HIST_BASE,
+		.end		= OMAP3430_ISP_HIST_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_H3A_BASE,
+		.end		= OMAP3430_ISP_H3A_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_PREV_BASE,
+		.end		= OMAP3430_ISP_PREV_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_RESZ_BASE,
+		.end		= OMAP3430_ISP_RESZ_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_SBL_BASE,
+		.end		= OMAP3430_ISP_SBL_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CSI2A_BASE,
+		.end		= OMAP3430_ISP_CSI2A_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CSI2PHY_BASE,
+		.end		= OMAP3430_ISP_CSI2PHY_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_34XX_CAM_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device omap3isp_device = {
+	.name		= "omap3isp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3isp_resources),
+	.resource	= omap3isp_resources,
+};
+
+static inline void omap_init_camera(void)
+{
+	platform_device_register(&omap3isp_device);
+}
+#else
+static inline void omap_init_camera(void)
+{
+}
+#endif
+
+#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
+
+#define MBOX_REG_SIZE	0x120
+
+static struct resource omap2_mbox_resources[] = {
+	{
+		.start		= OMAP24XX_MAILBOX_BASE,
+		.end		= OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -47,20 +155,40 @@ static struct resource mbox_resources[] = {
 	},
 };
 
+static struct resource omap3_mbox_resources[] = {
+	{
+		.start		= OMAP34XX_MAILBOX_BASE,
+		.end		= OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_24XX_MAIL_U0_MPU,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device mbox_device = {
-	.name		= "mailbox",
+	.name		= "omap2-mailbox",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mbox_resources),
-	.resource	= mbox_resources,
 };
 
 static inline void omap_init_mbox(void)
 {
+	if (cpu_is_omap2420()) {
+		mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources);
+		mbox_device.resource = omap2_mbox_resources;
+	} else if (cpu_is_omap3430()) {
+		mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources);
+		mbox_device.resource = omap3_mbox_resources;
+	} else {
+		pr_err("%s: platform not supported\n", __func__);
+		return;
+	}
 	platform_device_register(&mbox_device);
 }
 #else
 static inline void omap_init_mbox(void) { }
-#endif
+#endif /* CONFIG_OMAP_MBOX_FWK */
 
 #if defined(CONFIG_OMAP_STI)
 
@@ -348,11 +476,12 @@ static void __init omap_hsmmc_reset(void)
 		}
 
 		dummy_pdev.id = i;
-		iclk = clk_get(dev, "mmchs_ick");
+		dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
+		iclk = clk_get(dev, "ick");
 		if (iclk && clk_enable(iclk))
 			iclk = NULL;
 
-		fclk = clk_get(dev, "mmchs_fck");
+		fclk = clk_get(dev, "fck");
 		if (fclk && clk_enable(fclk))
 			fclk = NULL;
 
@@ -506,6 +635,7 @@ static int __init omap2_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_hsmmc_reset();
+	omap_init_camera();
 	omap_init_mbox();
 	omap_init_mcspi();
 	omap_hdq_init();
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index b52a02fc7cd..34b5914e0f8 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -217,8 +217,13 @@ void __init omap2_check_revision(void)
 		omap_chip.oc = CHIP_IS_OMAP3430;
 		if (omap_rev() == OMAP3430_REV_ES1_0)
 			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
-		else if (omap_rev() > OMAP3430_REV_ES1_0)
+		else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
+			 omap_rev() <= OMAP3430_REV_ES2_1)
 			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+		else if (omap_rev() == OMAP3430_REV_ES3_0)
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+		else if (omap_rev() == OMAP3430_REV_ES3_1)
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 	} else {
 		pr_err("Uninitialized omap_chip, please fix!\n");
 	}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5ea64f926ed..916fcd3a232 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -27,8 +27,8 @@
 #include <mach/mux.h>
 #include <mach/omapfb.h>
 #include <mach/sram.h>
-
-#include "memory.h"
+#include <mach/sdrc.h>
+#include <mach/gpmc.h>
 
 #include "clock.h"
 
@@ -195,12 +195,12 @@ void __init omap2_map_common_io(void)
 	omapfb_reserve_sdram();
 }
 
-void __init omap2_init_common_hw(void)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-	omap2_init_memory();
+	omap2_sdrc_init(sp);
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 32b7af3c610..fd5b8a5925c 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -1,9 +1,9 @@
 /*
- * Mailbox reservation modules for OMAP2
+ * Mailbox reservation modules for OMAP2/3
  *
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
  * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *        and  Paul Mundt <paul.mundt@nokia.com>
+ *        and  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,40 +18,22 @@
 #include <mach/mailbox.h>
 #include <mach/irqs.h>
 
-#define MAILBOX_REVISION		0x00
-#define MAILBOX_SYSCONFIG		0x10
-#define MAILBOX_SYSSTATUS		0x14
-#define MAILBOX_MESSAGE_0		0x40
-#define MAILBOX_MESSAGE_1		0x44
-#define MAILBOX_MESSAGE_2		0x48
-#define MAILBOX_MESSAGE_3		0x4c
-#define MAILBOX_MESSAGE_4		0x50
-#define MAILBOX_MESSAGE_5		0x54
-#define MAILBOX_FIFOSTATUS_0		0x80
-#define MAILBOX_FIFOSTATUS_1		0x84
-#define MAILBOX_FIFOSTATUS_2		0x88
-#define MAILBOX_FIFOSTATUS_3		0x8c
-#define MAILBOX_FIFOSTATUS_4		0x90
-#define MAILBOX_FIFOSTATUS_5		0x94
-#define MAILBOX_MSGSTATUS_0		0xc0
-#define MAILBOX_MSGSTATUS_1		0xc4
-#define MAILBOX_MSGSTATUS_2		0xc8
-#define MAILBOX_MSGSTATUS_3		0xcc
-#define MAILBOX_MSGSTATUS_4		0xd0
-#define MAILBOX_MSGSTATUS_5		0xd4
-#define MAILBOX_IRQSTATUS_0		0x100
-#define MAILBOX_IRQENABLE_0		0x104
-#define MAILBOX_IRQSTATUS_1		0x108
-#define MAILBOX_IRQENABLE_1		0x10c
-#define MAILBOX_IRQSTATUS_2		0x110
-#define MAILBOX_IRQENABLE_2		0x114
-#define MAILBOX_IRQSTATUS_3		0x118
-#define MAILBOX_IRQENABLE_3		0x11c
-
-static unsigned long mbox_base;
-
-#define MAILBOX_IRQ_NOTFULL(n)		(1 << (2 * (n) + 1))
-#define MAILBOX_IRQ_NEWMSG(n)		(1 << (2 * (n)))
+#define MAILBOX_REVISION		0x000
+#define MAILBOX_SYSCONFIG		0x010
+#define MAILBOX_SYSSTATUS		0x014
+#define MAILBOX_MESSAGE(m)		(0x040 + 4 * (m))
+#define MAILBOX_FIFOSTATUS(m)		(0x080 + 4 * (m))
+#define MAILBOX_MSGSTATUS(m)		(0x0c0 + 4 * (m))
+#define MAILBOX_IRQSTATUS(u)		(0x100 + 8 * (u))
+#define MAILBOX_IRQENABLE(u)		(0x104 + 8 * (u))
+
+#define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
+#define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
+
+#define MBOX_REG_SIZE			0x120
+#define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
+
+static void __iomem *mbox_base;
 
 struct omap_mbox2_fifo {
 	unsigned long msg;
@@ -66,6 +48,7 @@ struct omap_mbox2_priv {
 	unsigned long irqstatus;
 	u32 newmsg_bit;
 	u32 notfull_bit;
+	u32 ctx[MBOX_NR_REGS];
 };
 
 static struct clk *mbox_ick_handle;
@@ -73,14 +56,14 @@ static struct clk *mbox_ick_handle;
 static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 				  omap_mbox_type_t irq);
 
-static inline unsigned int mbox_read_reg(unsigned int reg)
+static inline unsigned int mbox_read_reg(size_t ofs)
 {
-	return __raw_readl(mbox_base + reg);
+	return __raw_readl(mbox_base + ofs);
 }
 
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
 {
-	__raw_writel(val, mbox_base + reg);
+	__raw_writel(val, mbox_base + ofs);
 }
 
 /* Mailbox H/W preparations */
@@ -95,6 +78,9 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 	}
 	clk_enable(mbox_ick_handle);
 
+	l = mbox_read_reg(MAILBOX_REVISION);
+	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
+
 	/* set smart-idle & autoidle */
 	l = mbox_read_reg(MAILBOX_SYSCONFIG);
 	l |= 0x00000011;
@@ -183,6 +169,32 @@ static int omap2_mbox_is_irq(struct omap_mbox *mbox,
 	return (enable & status & bit);
 }
 
+static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
+{
+	int i;
+	struct omap_mbox2_priv *p = mbox->priv;
+
+	for (i = 0; i < MBOX_NR_REGS; i++) {
+		p->ctx[i] = mbox_read_reg(i * sizeof(u32));
+
+		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
+			i, p->ctx[i]);
+	}
+}
+
+static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+	int i;
+	struct omap_mbox2_priv *p = mbox->priv;
+
+	for (i = 0; i < MBOX_NR_REGS; i++) {
+		mbox_write_reg(p->ctx[i], i * sizeof(u32));
+
+		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
+			i, p->ctx[i]);
+	}
+}
+
 static struct omap_mbox_ops omap2_mbox_ops = {
 	.type		= OMAP_MBOX_TYPE2,
 	.startup	= omap2_mbox_startup,
@@ -195,6 +207,8 @@ static struct omap_mbox_ops omap2_mbox_ops = {
 	.disable_irq	= omap2_mbox_disable_irq,
 	.ack_irq	= omap2_mbox_ack_irq,
 	.is_irq		= omap2_mbox_is_irq,
+	.save_ctx	= omap2_mbox_save_ctx,
+	.restore_ctx	= omap2_mbox_restore_ctx,
 };
 
 /*
@@ -209,15 +223,15 @@ static struct omap_mbox_ops omap2_mbox_ops = {
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE_0,
-		.fifo_stat	= MAILBOX_FIFOSTATUS_0,
+		.msg		= MAILBOX_MESSAGE(0),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(0),
 	},
 	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE_1,
-		.msg_stat	= MAILBOX_MSGSTATUS_1,
+		.msg		= MAILBOX_MESSAGE(1),
+		.msg_stat	= MAILBOX_MSGSTATUS(1),
 	},
-	.irqenable	= MAILBOX_IRQENABLE_0,
-	.irqstatus	= MAILBOX_IRQSTATUS_0,
+	.irqenable	= MAILBOX_IRQENABLE(0),
+	.irqstatus	= MAILBOX_IRQSTATUS(0),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
 };
@@ -229,18 +243,18 @@ struct omap_mbox mbox_dsp_info = {
 };
 EXPORT_SYMBOL(mbox_dsp_info);
 
-/* IVA */
+#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
 static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE_2,
-		.fifo_stat	= MAILBOX_FIFOSTATUS_2,
+		.msg		= MAILBOX_MESSAGE(2),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
 	},
 	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE_3,
-		.msg_stat	= MAILBOX_MSGSTATUS_3,
+		.msg		= MAILBOX_MESSAGE(3),
+		.msg_stat	= MAILBOX_MSGSTATUS(3),
 	},
-	.irqenable	= MAILBOX_IRQENABLE_3,
-	.irqstatus	= MAILBOX_IRQSTATUS_3,
+	.irqenable	= MAILBOX_IRQENABLE(3),
+	.irqstatus	= MAILBOX_IRQSTATUS(3),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
 };
@@ -250,17 +264,12 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-static int __init omap2_mbox_probe(struct platform_device *pdev)
+static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	int ret = 0;
-
-	if (pdev->num_resources != 3) {
-		dev_err(&pdev->dev, "invalid number of resources: %d\n",
-			pdev->num_resources);
-		return -ENODEV;
-	}
+	int ret;
 
 	/* MBOX base */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -268,42 +277,61 @@ static int __init omap2_mbox_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid mem resource\n");
 		return -ENODEV;
 	}
-	mbox_base = res->start;
+	mbox_base = ioremap(res->start, res->end - res->start);
+	if (!mbox_base)
+		return -ENOMEM;
 
-	/* DSP IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(!res)) {
+	/* DSP or IVA2 IRQ */
+	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
+	if (mbox_dsp_info.irq < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_dsp;
 	}
-	mbox_dsp_info.irq = res->start;
 
-	ret = omap_mbox_register(&mbox_dsp_info);
-
-	/* IVA IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid irq resource\n");
-		return -ENODEV;
+	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	if (ret)
+		goto err_dsp;
+
+#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
+	if (cpu_is_omap2420()) {
+		/* IVA IRQ */
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+		if (unlikely(!res)) {
+			dev_err(&pdev->dev, "invalid irq resource\n");
+			ret = -ENODEV;
+			goto err_iva1;
+		}
+		mbox_iva_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
+		if (ret)
+			goto err_iva1;
 	}
-	mbox_iva_info.irq = res->start;
-
-	ret = omap_mbox_register(&mbox_iva_info);
+#endif
+	return 0;
 
+err_iva1:
+	omap_mbox_unregister(&mbox_dsp_info);
+err_dsp:
+	iounmap(mbox_base);
 	return ret;
 }
 
-static int omap2_mbox_remove(struct platform_device *pdev)
+static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 {
+#if defined(CONFIG_ARCH_OMAP2420)
+	omap_mbox_unregister(&mbox_iva_info);
+#endif
 	omap_mbox_unregister(&mbox_dsp_info);
+	iounmap(mbox_base);
 	return 0;
 }
 
 static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
-	.remove = omap2_mbox_remove,
+	.remove = __devexit_p(omap2_mbox_remove),
 	.driver = {
-		.name = "mailbox",
+		.name = "omap2-mailbox",
 	},
 };
 
@@ -320,4 +348,7 @@ static void __exit omap2_mbox_exit(void)
 module_init(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
+MODULE_ALIAS("platform:omap2-mailbox");
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a9e631fc113..a5c0f0435cd 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -24,8 +24,6 @@
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
 
-const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
-
 static void omap2_mcbsp2_mux_setup(void)
 {
 	omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
@@ -57,8 +55,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -67,8 +63,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 };
 #define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -86,8 +80,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -96,8 +88,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP3_BASE,
@@ -106,8 +96,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP4_BASE,
@@ -116,8 +104,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP5_BASE,
@@ -126,8 +112,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 };
 #define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -145,8 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -155,8 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -165,8 +145,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -175,8 +153,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -185,8 +161,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
deleted file mode 100644
index bb3db80a7c4..00000000000
--- a/arch/arm/mach-omap2/memory.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/memory.h
- *
- * Interface for memory timing related functions for OMAP24XX
- *
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Copyright (C) 2005 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
-#define ARCH_ARM_MACH_OMAP2_MEMORY_H
-
-/* Memory timings */
-#define M_DDR		1
-#define M_LOCK_CTRL	(1 << 2)
-#define M_UNLOCK	0
-#define M_LOCK		1
-
-struct memory_timings {
-	u32 m_type;		/* ddr = 1, sdr = 0 */
-	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
-	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
-	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
-	u32 base_cs;		/* base chip select to use for calculations */
-};
-
-extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
-extern u32 omap2_memory_get_slow_dll_ctrl(void);
-extern u32 omap2_memory_get_fast_dll_ctrl(void);
-extern u32 omap2_memory_get_type(void);
-u32 omap2_dll_force_needed(void);
-u32 omap2_reprogram_sdrc(u32 level, u32 force);
-void __init omap2_init_memory(void);
-void __init gpmc_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 437f52073f6..dc40b3e7220 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
 #include <mach/control.h>
@@ -44,6 +45,7 @@
 #define VMMC2_315V		0x0c
 #define VMMC2_300V		0x0b
 #define VMMC2_285V		0x0a
+#define VMMC2_280V		0x09
 #define VMMC2_260V		0x08
 #define VMMC2_185V		0x06
 #define VMMC2_DEDICATED		0x2E
@@ -59,8 +61,8 @@ static struct twl_mmc_controller {
 	struct omap_mmc_platform_data	*mmc;
 	u8		twl_vmmc_dev_grp;
 	u8		twl_mmc_dedicated;
-	char		name[HSMMC_NAME_LEN];
-} hsmmc[] = {
+	char		name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC] = {
 	{
 		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
 		.twl_mmc_dedicated		= VMMC1_DEDICATED,
@@ -98,6 +100,14 @@ static int twl_mmc_get_ro(struct device *dev, int slot)
 	return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
 }
 
+static int twl_mmc_get_cover_state(struct device *dev, int slot)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	/* NOTE: assumes card detect signal is active-low */
+	return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+}
+
 /*
  * MMC Slot Initialization.
  */
@@ -166,66 +176,85 @@ static int twl_mmc_resume(struct device *dev, int slot)
 /*
  * Sets the MMC voltage in twl4030
  */
+
+#define MMC1_OCR	(MMC_VDD_165_195 \
+		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
+#define MMC2_OCR	(MMC_VDD_165_195 \
+		|MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
+		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
+
 static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
 {
 	int ret;
-	u8 vmmc, dev_grp_val;
-
-	switch (1 << vdd) {
-	case MMC_VDD_35_36:
-	case MMC_VDD_34_35:
-	case MMC_VDD_33_34:
-	case MMC_VDD_32_33:
-	case MMC_VDD_31_32:
-	case MMC_VDD_30_31:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
-			vmmc = VMMC1_315V;
-		else
-			vmmc = VMMC2_315V;
-		break;
-	case MMC_VDD_29_30:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
-			vmmc = VMMC1_315V;
-		else
-			vmmc = VMMC2_300V;
-		break;
-	case MMC_VDD_27_28:
-	case MMC_VDD_26_27:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
-			vmmc = VMMC1_285V;
-		else
-			vmmc = VMMC2_285V;
-		break;
-	case MMC_VDD_25_26:
-	case MMC_VDD_24_25:
-	case MMC_VDD_23_24:
-	case MMC_VDD_22_23:
-	case MMC_VDD_21_22:
-	case MMC_VDD_20_21:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
-			vmmc = VMMC1_285V;
-		else
-			vmmc = VMMC2_260V;
-		break;
-	case MMC_VDD_165_195:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+	u8 vmmc = 0, dev_grp_val;
+
+	if (!vdd)
+		goto doit;
+
+	if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
+		/* VMMC1:  max 220 mA.  And for 8-bit mode,
+		 * VSIM:  max 50 mA
+		 */
+		switch (1 << vdd) {
+		case MMC_VDD_165_195:
 			vmmc = VMMC1_185V;
-		else
+			/* and VSIM_180V */
+			break;
+		case MMC_VDD_28_29:
+			vmmc = VMMC1_285V;
+			/* and VSIM_280V */
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			vmmc = VMMC1_300V;
+			/* and VSIM_300V */
+			break;
+		case MMC_VDD_31_32:
+			vmmc = VMMC1_315V;
+			/* error if VSIM needed */
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
+		/* VMMC2:  max 100 mA */
+		switch (1 << vdd) {
+		case MMC_VDD_165_195:
 			vmmc = VMMC2_185V;
-		break;
-	default:
-		vmmc = 0;
-		break;
+			break;
+		case MMC_VDD_25_26:
+		case MMC_VDD_26_27:
+			vmmc = VMMC2_260V;
+			break;
+		case MMC_VDD_27_28:
+			vmmc = VMMC2_280V;
+			break;
+		case MMC_VDD_28_29:
+			vmmc = VMMC2_285V;
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			vmmc = VMMC2_300V;
+			break;
+		case MMC_VDD_31_32:
+			vmmc = VMMC2_315V;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
 	}
 
-	if (vmmc)
+doit:
+	if (vdd)
 		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
 	else
 		dev_grp_val = LDO_CLR;		/* Power down */
 
 	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
 					dev_grp_val, c->twl_vmmc_dev_grp);
-	if (ret)
+	if (ret || !vdd)
 		return ret;
 
 	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
@@ -242,6 +271,14 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 	struct twl_mmc_controller *c = &hsmmc[0];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/*
+	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+	 * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
+	 *
+	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 */
 	if (power_on) {
 		if (cpu_is_omap2430()) {
 			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
@@ -298,6 +335,12 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 	struct twl_mmc_controller *c = &hsmmc[1];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/*
+	 * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+	 * VDDS is used to power the pins, optionally with a transceiver to
+	 * support cards using voltages other than VDDS (1.8V nominal).  When a
+	 * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+	 */
 	if (power_on) {
 		if (mmc->slots[0].internal_clock) {
 			u32 reg;
@@ -314,6 +357,16 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 	return ret;
 }
 
+static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
+		int vdd)
+{
+	/*
+	 * Assume MMC3 has self-powered device connected, for example on-board
+	 * chip with external power source.
+	 */
+	return 0;
+}
+
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -349,13 +402,13 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			return;
 		}
 
-		sprintf(twl->name, "mmc%islot%i", c->mmc, 1);
+		if (c->name)
+			strncpy(twl->name, c->name, HSMMC_NAME_LEN);
+		else
+			snprintf(twl->name, ARRAY_SIZE(twl->name),
+				"mmc%islot%i", c->mmc, 1);
 		mmc->slots[0].name = twl->name;
 		mmc->nr_slots = 1;
-		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
-					MMC_VDD_26_27 | MMC_VDD_27_28 |
-					MMC_VDD_29_30 |
-					MMC_VDD_30_31 | MMC_VDD_31_32;
 		mmc->slots[0].wires = c->wires;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
@@ -369,7 +422,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 
 			mmc->slots[0].switch_pin = c->gpio_cd;
 			mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
-			mmc->slots[0].card_detect = twl_mmc_card_detect;
+			if (c->cover_only)
+				mmc->slots[0].get_cover_state = twl_mmc_get_cover_state;
+			else
+				mmc->slots[0].card_detect = twl_mmc_card_detect;
 		} else
 			mmc->slots[0].switch_pin = -EINVAL;
 
@@ -385,24 +441,43 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 
 		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
 		 * the TWL4030's VMMC1 and VMMC2, respectively;
-		 * and that OMAP's MMC3 isn't used.
+		 * and that MMC3 device has it's own power source.
 		 */
 
 		switch (c->mmc) {
 		case 1:
 			mmc->slots[0].set_power = twl_mmc1_set_power;
+			mmc->slots[0].ocr_mask = MMC1_OCR;
 			break;
 		case 2:
 			mmc->slots[0].set_power = twl_mmc2_set_power;
+			if (c->transceiver)
+				mmc->slots[0].ocr_mask = MMC2_OCR;
+			else
+				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+			break;
+		case 3:
+			mmc->slots[0].set_power = twl_mmc3_set_power;
+			mmc->slots[0].ocr_mask = MMC_VDD_165_195;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
+			kfree(mmc);
 			continue;
 		}
 		hsmmc_data[c->mmc - 1] = mmc;
 	}
 
 	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+
+	/* pass the device nodes back to board setup code */
+	for (c = controllers; c->mmc; c++) {
+		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+		if (!c->mmc || c->mmc > nr_hsmmc)
+			continue;
+		c->dev = mmc->dev;
+	}
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index e1c8076400c..ea59e862429 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -9,9 +9,13 @@
 struct twl4030_hsmmc_info {
 	u8	mmc;		/* controller 1/2/3 */
 	u8	wires;		/* 1/4/8 wires */
+	bool	transceiver;	/* MMC-2 option */
+	bool	ext_clock;	/* use external pin for input clock */
+	bool	cover_only;	/* No card detect - just cover switch */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
-	int	ext_clock:1;	/* use external pin for input clock */
+	char	*name;		/* or NULL for default */
+	struct device *dev;	/* returned: pointer to mmc adapter */
 };
 
 #if	defined(CONFIG_TWL4030_CORE) && \
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index dacb41f130c..026c4fc883a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -453,10 +453,37 @@ MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
 
 
 /* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
+ * (Always specify PIN_INPUT, except for names suffixed by "_OUT".)
  * No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
  */
+MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 };
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 55361c16c9d..ea8ceaed09c 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -103,7 +103,7 @@ static struct platform_suspend_ops omap_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
 {
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 1e151faebbd..691470ea4c6 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -171,13 +171,19 @@ static struct powerdomain *powerdomains_omap[] __initdata = {
 	&iva2_pwrdm,
 	&mpu_34xx_pwrdm,
 	&neon_pwrdm,
-	&core_34xx_pwrdm,
+	&core_34xx_pre_es3_1_pwrdm,
+	&core_34xx_es3_1_pwrdm,
 	&cam_pwrdm,
 	&dss_pwrdm,
 	&per_pwrdm,
 	&emu_pwrdm,
 	&sgx_pwrdm,
 	&usbhost_pwrdm,
+	&dpll1_pwrdm,
+	&dpll2_pwrdm,
+	&dpll3_pwrdm,
+	&dpll4_pwrdm,
+	&dpll5_pwrdm,
 #endif
 
 	NULL
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index f573f710839..4dcf94b800a 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -200,12 +200,33 @@ static struct powerdomain mpu_34xx_pwrdm = {
 };
 
 /* No wkdeps or sleepdeps for 34xx core apparently */
-static struct powerdomain core_34xx_pwrdm = {
+static struct powerdomain core_34xx_pre_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
+					   CHIP_IS_OMAP3430ES2 |
+					   CHIP_IS_OMAP3430ES3_0),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.dep_bit	  = OMAP3430_EN_CORE_SHIFT,
+	.banks		  = 2,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
+		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+	},
+};
+
+/* No wkdeps or sleepdeps for 34xx core apparently */
+static struct powerdomain core_34xx_es3_1_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = CORE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.dep_bit	  = OMAP3430_EN_CORE_SHIFT,
+	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
 	.banks		  = 2,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
@@ -236,14 +257,19 @@ static struct powerdomain dss_pwrdm = {
 	},
 };
 
+/*
+ * Although the 34XX TRM Rev K Table 4-371 notes that retention is a
+ * possible SGX powerstate, the SGX device itself does not support
+ * retention.
+ */
 static struct powerdomain sgx_pwrdm = {
 	.name		  = "sgx_pwrdm",
 	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 	.wkdep_srcs	  = gfx_sgx_wkdeps,
 	.sleepdep_srcs	  = cam_gfx_sleepdeps,
 	/* XXX This is accurate for 3430 SGX, but what about GFX? */
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
@@ -307,11 +333,12 @@ static struct powerdomain neon_pwrdm = {
 static struct powerdomain usbhost_pwrdm = {
 	.name		  = "usbhost_pwrdm",
 	.prcm_offs	  = OMAP3430ES2_USBHOST_MOD,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 	.wkdep_srcs	  = per_usbhost_wkdeps,
 	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
@@ -321,6 +348,37 @@ static struct powerdomain usbhost_pwrdm = {
 	},
 };
 
+static struct powerdomain dpll1_pwrdm = {
+	.name		= "dpll1_pwrdm",
+	.prcm_offs	= MPU_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll2_pwrdm = {
+	.name		= "dpll2_pwrdm",
+	.prcm_offs	= OMAP3430_IVA2_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll3_pwrdm = {
+	.name		= "dpll3_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll4_pwrdm = {
+	.name		= "dpll4_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll5_pwrdm = {
+	.name		= "dpll5_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+};
+
+
 #endif    /* CONFIG_ARCH_OMAP34XX */
 
 
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 4a32822ff3f..812d50ee495 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -113,33 +113,58 @@
 #define OMAP2430_EN_USBHS				(1 << 6)
 
 /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
-#define OMAP2420_ST_MMC					(1 << 26)
-#define OMAP24XX_ST_UART2				(1 << 22)
-#define OMAP24XX_ST_UART1				(1 << 21)
-#define OMAP24XX_ST_MCSPI2				(1 << 18)
-#define OMAP24XX_ST_MCSPI1				(1 << 17)
-#define OMAP24XX_ST_GPT12				(1 << 14)
-#define OMAP24XX_ST_GPT11				(1 << 13)
-#define OMAP24XX_ST_GPT10				(1 << 12)
-#define OMAP24XX_ST_GPT9				(1 << 11)
-#define OMAP24XX_ST_GPT8				(1 << 10)
-#define OMAP24XX_ST_GPT7				(1 << 9)
-#define OMAP24XX_ST_GPT6				(1 << 8)
-#define OMAP24XX_ST_GPT5				(1 << 7)
-#define OMAP24XX_ST_GPT4				(1 << 6)
-#define OMAP24XX_ST_GPT3				(1 << 5)
-#define OMAP24XX_ST_GPT2				(1 << 4)
-#define OMAP2420_ST_VLYNQ				(1 << 3)
+#define OMAP2420_ST_MMC_SHIFT				26
+#define OMAP2420_ST_MMC_MASK				(1 << 26)
+#define OMAP24XX_ST_UART2_SHIFT				22
+#define OMAP24XX_ST_UART2_MASK				(1 << 22)
+#define OMAP24XX_ST_UART1_SHIFT				21
+#define OMAP24XX_ST_UART1_MASK				(1 << 21)
+#define OMAP24XX_ST_MCSPI2_SHIFT			18
+#define OMAP24XX_ST_MCSPI2_MASK				(1 << 18)
+#define OMAP24XX_ST_MCSPI1_SHIFT			17
+#define OMAP24XX_ST_MCSPI1_MASK				(1 << 17)
+#define OMAP24XX_ST_GPT12_SHIFT				14
+#define OMAP24XX_ST_GPT12_MASK				(1 << 14)
+#define OMAP24XX_ST_GPT11_SHIFT				13
+#define OMAP24XX_ST_GPT11_MASK				(1 << 13)
+#define OMAP24XX_ST_GPT10_SHIFT				12
+#define OMAP24XX_ST_GPT10_MASK				(1 << 12)
+#define OMAP24XX_ST_GPT9_SHIFT				11
+#define OMAP24XX_ST_GPT9_MASK				(1 << 11)
+#define OMAP24XX_ST_GPT8_SHIFT				10
+#define OMAP24XX_ST_GPT8_MASK				(1 << 10)
+#define OMAP24XX_ST_GPT7_SHIFT				9
+#define OMAP24XX_ST_GPT7_MASK				(1 << 9)
+#define OMAP24XX_ST_GPT6_SHIFT				8
+#define OMAP24XX_ST_GPT6_MASK				(1 << 8)
+#define OMAP24XX_ST_GPT5_SHIFT				7
+#define OMAP24XX_ST_GPT5_MASK				(1 << 7)
+#define OMAP24XX_ST_GPT4_SHIFT				6
+#define OMAP24XX_ST_GPT4_MASK				(1 << 6)
+#define OMAP24XX_ST_GPT3_SHIFT				5
+#define OMAP24XX_ST_GPT3_MASK				(1 << 5)
+#define OMAP24XX_ST_GPT2_SHIFT				4
+#define OMAP24XX_ST_GPT2_MASK				(1 << 4)
+#define OMAP2420_ST_VLYNQ_SHIFT				3
+#define OMAP2420_ST_VLYNQ_MASK				(1 << 3)
 
 /* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
-#define OMAP2430_ST_MDM_INTC				(1 << 11)
-#define OMAP2430_ST_GPIO5				(1 << 10)
-#define OMAP2430_ST_MCSPI3				(1 << 9)
-#define OMAP2430_ST_MMCHS2				(1 << 8)
-#define OMAP2430_ST_MMCHS1				(1 << 7)
-#define OMAP2430_ST_USBHS				(1 << 6)
-#define OMAP24XX_ST_UART3				(1 << 2)
-#define OMAP24XX_ST_USB					(1 << 0)
+#define OMAP2430_ST_MDM_INTC_SHIFT			11
+#define OMAP2430_ST_MDM_INTC_MASK			(1 << 11)
+#define OMAP2430_ST_GPIO5_SHIFT				10
+#define OMAP2430_ST_GPIO5_MASK				(1 << 10)
+#define OMAP2430_ST_MCSPI3_SHIFT			9
+#define OMAP2430_ST_MCSPI3_MASK				(1 << 9)
+#define OMAP2430_ST_MMCHS2_SHIFT			8
+#define OMAP2430_ST_MMCHS2_MASK				(1 << 8)
+#define OMAP2430_ST_MMCHS1_SHIFT			7
+#define OMAP2430_ST_MMCHS1_MASK				(1 << 7)
+#define OMAP2430_ST_USBHS_SHIFT				6
+#define OMAP2430_ST_USBHS_MASK				(1 << 6)
+#define OMAP24XX_ST_UART3_SHIFT				2
+#define OMAP24XX_ST_UART3_MASK				(1 << 2)
+#define OMAP24XX_ST_USB_SHIFT				0
+#define OMAP24XX_ST_USB_MASK				(1 << 0)
 
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP24XX_EN_GPIOS_SHIFT				2
@@ -148,11 +173,13 @@
 #define OMAP24XX_EN_GPT1				(1 << 0)
 
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS				(1 << 2)
-#define OMAP24XX_ST_GPT1				(1 << 0)
+#define OMAP24XX_ST_GPIOS_SHIFT				(1 << 2)
+#define OMAP24XX_ST_GPIOS_MASK				2
+#define OMAP24XX_ST_GPT1_SHIFT				(1 << 0)
+#define OMAP24XX_ST_GPT1_MASK				0
 
 /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM					(1 << 0)
+#define OMAP2430_ST_MDM_SHIFT				(1 << 0)
 
 
 /* 3430 register bits shared between CM & PRM registers */
@@ -205,24 +232,46 @@
 #define OMAP3430_EN_HSOTGUSB_SHIFT				4
 
 /* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
-#define OMAP3430_ST_MMC2				(1 << 25)
-#define OMAP3430_ST_MMC1				(1 << 24)
-#define OMAP3430_ST_MCSPI4				(1 << 21)
-#define OMAP3430_ST_MCSPI3				(1 << 20)
-#define OMAP3430_ST_MCSPI2				(1 << 19)
-#define OMAP3430_ST_MCSPI1				(1 << 18)
-#define OMAP3430_ST_I2C3				(1 << 17)
-#define OMAP3430_ST_I2C2				(1 << 16)
-#define OMAP3430_ST_I2C1				(1 << 15)
-#define OMAP3430_ST_UART2				(1 << 14)
-#define OMAP3430_ST_UART1				(1 << 13)
-#define OMAP3430_ST_GPT11				(1 << 12)
-#define OMAP3430_ST_GPT10				(1 << 11)
-#define OMAP3430_ST_MCBSP5				(1 << 10)
-#define OMAP3430_ST_MCBSP1				(1 << 9)
-#define OMAP3430_ST_FSHOSTUSB				(1 << 5)
-#define OMAP3430_ST_HSOTGUSB				(1 << 4)
-#define OMAP3430_ST_D2D					(1 << 3)
+#define OMAP3430_ST_MMC2_SHIFT				25
+#define OMAP3430_ST_MMC2_MASK				(1 << 25)
+#define OMAP3430_ST_MMC1_SHIFT				24
+#define OMAP3430_ST_MMC1_MASK				(1 << 24)
+#define OMAP3430_ST_MCSPI4_SHIFT			21
+#define OMAP3430_ST_MCSPI4_MASK				(1 << 21)
+#define OMAP3430_ST_MCSPI3_SHIFT			20
+#define OMAP3430_ST_MCSPI3_MASK				(1 << 20)
+#define OMAP3430_ST_MCSPI2_SHIFT			19
+#define OMAP3430_ST_MCSPI2_MASK				(1 << 19)
+#define OMAP3430_ST_MCSPI1_SHIFT			18
+#define OMAP3430_ST_MCSPI1_MASK				(1 << 18)
+#define OMAP3430_ST_I2C3_SHIFT				17
+#define OMAP3430_ST_I2C3_MASK				(1 << 17)
+#define OMAP3430_ST_I2C2_SHIFT				16
+#define OMAP3430_ST_I2C2_MASK				(1 << 16)
+#define OMAP3430_ST_I2C1_SHIFT				15
+#define OMAP3430_ST_I2C1_MASK				(1 << 15)
+#define OMAP3430_ST_UART2_SHIFT				14
+#define OMAP3430_ST_UART2_MASK				(1 << 14)
+#define OMAP3430_ST_UART1_SHIFT				13
+#define OMAP3430_ST_UART1_MASK				(1 << 13)
+#define OMAP3430_ST_GPT11_SHIFT				12
+#define OMAP3430_ST_GPT11_MASK				(1 << 12)
+#define OMAP3430_ST_GPT10_SHIFT				11
+#define OMAP3430_ST_GPT10_MASK				(1 << 11)
+#define OMAP3430_ST_MCBSP5_SHIFT			10
+#define OMAP3430_ST_MCBSP5_MASK				(1 << 10)
+#define OMAP3430_ST_MCBSP1_SHIFT			9
+#define OMAP3430_ST_MCBSP1_MASK				(1 << 9)
+#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT			5
+#define OMAP3430ES1_ST_FSHOSTUSB_MASK			(1 << 5)
+#define OMAP3430ES1_ST_HSOTGUSB_SHIFT			4
+#define OMAP3430ES1_ST_HSOTGUSB_MASK			(1 << 4)
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT		5
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK		(1 << 5)
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT		4
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK		(1 << 4)
+#define OMAP3430_ST_D2D_SHIFT				3
+#define OMAP3430_ST_D2D_MASK				(1 << 3)
 
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP3430_EN_GPIO1				(1 << 3)
@@ -241,11 +290,16 @@
 #define OMAP3430_EN_GPT12_SHIFT				1
 
 /* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
-#define OMAP3430_ST_SR2					(1 << 7)
-#define OMAP3430_ST_SR1					(1 << 6)
-#define OMAP3430_ST_GPIO1				(1 << 3)
-#define OMAP3430_ST_GPT12				(1 << 1)
-#define OMAP3430_ST_GPT1				(1 << 0)
+#define OMAP3430_ST_SR2_SHIFT				7
+#define OMAP3430_ST_SR2_MASK				(1 << 7)
+#define OMAP3430_ST_SR1_SHIFT				6
+#define OMAP3430_ST_SR1_MASK				(1 << 6)
+#define OMAP3430_ST_GPIO1_SHIFT				3
+#define OMAP3430_ST_GPIO1_MASK				(1 << 3)
+#define OMAP3430_ST_GPT12_SHIFT				1
+#define OMAP3430_ST_GPT12_MASK				(1 << 1)
+#define OMAP3430_ST_GPT1_SHIFT				0
+#define OMAP3430_ST_GPT1_MASK				(1 << 0)
 
 /*
  * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
@@ -296,20 +350,34 @@
 #define OMAP3430_EN_MCBSP2_SHIFT			0
 
 /* CM_IDLEST_PER, PM_WKST_PER shared bits */
-#define OMAP3430_ST_GPIO6				(1 << 17)
-#define OMAP3430_ST_GPIO5				(1 << 16)
-#define OMAP3430_ST_GPIO4				(1 << 15)
-#define OMAP3430_ST_GPIO3				(1 << 14)
-#define OMAP3430_ST_GPIO2				(1 << 13)
-#define OMAP3430_ST_UART3				(1 << 11)
-#define OMAP3430_ST_GPT9				(1 << 10)
-#define OMAP3430_ST_GPT8				(1 << 9)
-#define OMAP3430_ST_GPT7				(1 << 8)
-#define OMAP3430_ST_GPT6				(1 << 7)
-#define OMAP3430_ST_GPT5				(1 << 6)
-#define OMAP3430_ST_GPT4				(1 << 5)
-#define OMAP3430_ST_GPT3				(1 << 4)
-#define OMAP3430_ST_GPT2				(1 << 3)
+#define OMAP3430_ST_GPIO6_SHIFT				17
+#define OMAP3430_ST_GPIO6_MASK				(1 << 17)
+#define OMAP3430_ST_GPIO5_SHIFT				16
+#define OMAP3430_ST_GPIO5_MASK				(1 << 16)
+#define OMAP3430_ST_GPIO4_SHIFT				15
+#define OMAP3430_ST_GPIO4_MASK				(1 << 15)
+#define OMAP3430_ST_GPIO3_SHIFT				14
+#define OMAP3430_ST_GPIO3_MASK				(1 << 14)
+#define OMAP3430_ST_GPIO2_SHIFT				13
+#define OMAP3430_ST_GPIO2_MASK				(1 << 13)
+#define OMAP3430_ST_UART3_SHIFT				11
+#define OMAP3430_ST_UART3_MASK				(1 << 11)
+#define OMAP3430_ST_GPT9_SHIFT				10
+#define OMAP3430_ST_GPT9_MASK				(1 << 10)
+#define OMAP3430_ST_GPT8_SHIFT				9
+#define OMAP3430_ST_GPT8_MASK				(1 << 9)
+#define OMAP3430_ST_GPT7_SHIFT				8
+#define OMAP3430_ST_GPT7_MASK				(1 << 8)
+#define OMAP3430_ST_GPT6_SHIFT				7
+#define OMAP3430_ST_GPT6_MASK				(1 << 7)
+#define OMAP3430_ST_GPT5_SHIFT				6
+#define OMAP3430_ST_GPT5_MASK				(1 << 6)
+#define OMAP3430_ST_GPT4_SHIFT				5
+#define OMAP3430_ST_GPT4_MASK				(1 << 5)
+#define OMAP3430_ST_GPT3_SHIFT				4
+#define OMAP3430_ST_GPT3_MASK				(1 << 4)
+#define OMAP3430_ST_GPT2_SHIFT				3
+#define OMAP3430_ST_GPT2_MASK				(1 << 3)
 
 /* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
 #define OMAP3430_EN_CORE_SHIFT				0
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 5b5ecfe6c99..c6a7940f428 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -366,6 +366,7 @@
 
 /* PM_WKEN_WKUP specific bits */
 #define OMAP3430_EN_IO					(1 << 8)
+#define OMAP3430_EN_GPIO1				(1 << 3)
 
 /* PM_MPUGRPSEL_WKUP specific bits */
 
@@ -452,6 +453,14 @@
 #define OMAP3430_CMDRA0_MASK				(0xff << 0)
 
 /* PRM_VC_CMD_VAL_0 specific bits */
+#define OMAP3430_VC_CMD_ON_SHIFT			24
+#define OMAP3430_VC_CMD_ON_MASK				(0xFF << 24)
+#define OMAP3430_VC_CMD_ONLP_SHIFT			16
+#define OMAP3430_VC_CMD_ONLP_MASK			(0xFF << 16)
+#define OMAP3430_VC_CMD_RET_SHIFT			8
+#define OMAP3430_VC_CMD_RET_MASK			(0xFF << 8)
+#define OMAP3430_VC_CMD_OFF_SHIFT			0
+#define OMAP3430_VC_CMD_OFF_MASK			(0xFF << 0)
 
 /* PRM_VC_CMD_VAL_1 specific bits */
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index e4dc4b17881..826d326b806 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -141,6 +141,19 @@
 #define PM_PWSTCTRL					0x00e0
 #define PM_PWSTST					0x00e4
 
+/* Omap2 specific registers */
+#define OMAP24XX_PM_WKEN2				0x00a4
+#define OMAP24XX_PM_WKST2				0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
+
+/* Omap3 specific registers */
+#define OMAP3430ES2_PM_WKEN3				0x00f0
+#define OMAP3430ES2_PM_WKST3				0x00b8
+
 #define OMAP3430_PM_MPUGRPSEL				0x00a4
 #define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
 
@@ -153,16 +166,6 @@
 #define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
 
 
-/* Architecture-specific registers */
-
-#define OMAP24XX_PM_WKEN2				0x00a4
-#define OMAP24XX_PM_WKST2				0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
-
 #ifndef __ASSEMBLER__
 
 /* Power/reset management domain register get/set */
@@ -228,7 +231,6 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 #define OMAP_RSTTIME1_SHIFT				0
 #define OMAP_RSTTIME1_MASK				(0xff << 0)
 
-
 /* PRM_RSTCTRL */
 /* Named RM_RSTCTRL_WKUP on the 24xx */
 /* 2420 calls RST_DPLL3 'RST_DPLL' */
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
new file mode 100644
index 00000000000..2a30060cb4b
--- /dev/null
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -0,0 +1,93 @@
+/*
+ * SMS/SDRC (SDRAM controller) common code for OMAP2/3
+ *
+ * Copyright (C) 2005, 2008 Texas Instruments Inc.
+ * Copyright (C) 2005, 2008 Nokia Corporation
+ *
+ * Tony Lindgren <tony@atomide.com>
+ * Paul Walmsley
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+
+#include "prm.h"
+
+#include <mach/sdrc.h>
+#include "sdrc.h"
+
+static struct omap_sdrc_params *sdrc_init_params;
+
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
+
+
+/**
+ * omap2_sdrc_get_params - return SDRC register values for a given clock rate
+ * @r: SDRC clock rate (in Hz)
+ *
+ * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
+ * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
+ * SDRC clock rate 'r'.  These parameters control various timing
+ * delays in the SDRAM controller that are expressed in terms of the
+ * number of SDRC clock cycles to wait; hence the clock rate
+ * dependency. Note that sdrc_init_params must be sorted rate
+ * descending.  Also assumes that both chip-selects use the same
+ * timing parameters.  Returns a struct omap_sdrc_params * upon
+ * success, or NULL upon failure.
+ */
+struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+{
+	struct omap_sdrc_params *sp;
+
+	sp = sdrc_init_params;
+
+	while (sp->rate != r)
+		sp++;
+
+	if (!sp->rate)
+		return NULL;
+
+	return sp;
+}
+
+
+void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+{
+	omap2_sdrc_base = omap2_globals->sdrc;
+	omap2_sms_base = omap2_globals->sms;
+}
+
+/* turn on smart idle modes for SDRAM scheduler and controller */
+void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+{
+	u32 l;
+
+	l = sms_read_reg(SMS_SYSCONFIG);
+	l &= ~(0x3 << 3);
+	l |= (0x2 << 3);
+	sms_write_reg(l, SMS_SYSCONFIG);
+
+	l = sdrc_read_reg(SDRC_SYSCONFIG);
+	l &= ~(0x3 << 3);
+	l |= (0x2 << 3);
+	sdrc_write_reg(l, SDRC_SYSCONFIG);
+
+	sdrc_init_params = sp;
+}
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 882c7022429..0afdad5ae9f 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -1,13 +1,14 @@
 /*
- * linux/arch/arm/mach-omap2/memory.c
+ * linux/arch/arm/mach-omap2/sdrc2xxx.c
  *
- * Memory timing related functions for OMAP24XX
+ * SDRAM timing related functions for OMAP2xxx
  *
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (C) 2005, 2008 Texas Instruments Inc.
+ * Copyright (C) 2005, 2008 Nokia Corporation
  *
- * Copyright (C) 2005 Nokia Corporation
  * Tony Lindgren <tony@atomide.com>
+ * Paul Walmsley
+ * Richard Woodruff <r-woodruff2@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -28,27 +29,31 @@
 #include <mach/sram.h>
 
 #include "prm.h"
-
-#include "memory.h"
+#include "clock.h"
+#include <mach/sdrc.h>
 #include "sdrc.h"
 
-void __iomem *omap2_sdrc_base;
-void __iomem *omap2_sms_base;
+/* Memory timing, DLL mode flags */
+#define M_DDR		1
+#define M_LOCK_CTRL	(1 << 2)
+#define M_UNLOCK	0
+#define M_LOCK		1
+
 
 static struct memory_timings mem_timings;
 static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
 
-u32 omap2_memory_get_slow_dll_ctrl(void)
+static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
 {
 	return mem_timings.slow_dll_ctrl;
 }
 
-u32 omap2_memory_get_fast_dll_ctrl(void)
+static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
 {
 	return mem_timings.fast_dll_ctrl;
 }
 
-u32 omap2_memory_get_type(void)
+static u32 omap2xxx_sdrc_get_type(void)
 {
 	return mem_timings.m_type;
 }
@@ -57,7 +62,7 @@ u32 omap2_memory_get_type(void)
  * Check the DLL lock state, and return tue if running in unlock mode.
  * This is needed to compensate for the shifted DLL value in unlock mode.
  */
-u32 omap2_dll_force_needed(void)
+u32 omap2xxx_sdrc_dll_is_unlocked(void)
 {
 	/* dlla and dllb are a set */
 	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
@@ -72,8 +77,10 @@ u32 omap2_dll_force_needed(void)
  * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
  * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
  * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
+ *
+ * Used by the clock framework during CORE DPLL changes
  */
-u32 omap2_reprogram_sdrc(u32 level, u32 force)
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 {
 	u32 dll_ctrl, m_type;
 	u32 prev = curr_perf_level;
@@ -82,15 +89,14 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
 	if ((curr_perf_level == level) && !force)
 		return prev;
 
-	if (level == CORE_CLK_SRC_DPLL) {
-		dll_ctrl = omap2_memory_get_slow_dll_ctrl();
-	} else if (level == CORE_CLK_SRC_DPLL_X2) {
-		dll_ctrl = omap2_memory_get_fast_dll_ctrl();
-	} else {
+	if (level == CORE_CLK_SRC_DPLL)
+		dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
+	else if (level == CORE_CLK_SRC_DPLL_X2)
+		dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
+	else
 		return prev;
-	}
 
-	m_type = omap2_memory_get_type();
+	m_type = omap2xxx_sdrc_get_type();
 
 	local_irq_save(flags);
 	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
@@ -101,23 +107,14 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
 	return prev;
 }
 
-#if !defined(CONFIG_ARCH_OMAP2)
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-				u32 base_cs, u32 force_unlock)
-{
-}
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-				      u32 mem_type)
-{
-}
-#endif
-
-void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
+/* Used by the clock framework during CORE DPLL changes */
+void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
 	u32 fast_dll = 0;
 
-	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+	/* DDR = 1, SDR = 0 */
+	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
 
 	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
 	 * In the case of 2422, its ok to use CS1 instead of CS0.
@@ -164,28 +161,3 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 	/* 90 degree phase for anything below 133Mhz + disable DLL filter */
 	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
 }
-
-void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
-{
-	omap2_sdrc_base = omap2_globals->sdrc;
-	omap2_sms_base = omap2_globals->sms;
-}
-
-/* turn on smart idle modes for SDRAM scheduler and controller */
-void __init omap2_init_memory(void)
-{
-	u32 l;
-
-	if (!cpu_is_omap2420())
-		return;
-
-	l = sms_read_reg(SMS_SYSCONFIG);
-	l &= ~(0x3 << 3);
-	l |= (0x2 << 3);
-	sms_write_reg(l, SMS_SYSCONFIG);
-
-	l = sdrc_read_reg(SDRC_SYSCONFIG);
-	l &= ~(0x3 << 3);
-	l |= (0x2 << 3);
-	sdrc_write_reg(l, SDRC_SYSCONFIG);
-}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
new file mode 100644
index 00000000000..fc74e913c41
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -0,0 +1,187 @@
+/*
+ * linux/arch/arm/mach-omap2/usb-musb.c
+ *
+ * This file will contain the board specific details for the
+ * MENTOR USB OTG controller on OMAP3430
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Vikram Pandita
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+#include <linux/usb/musb.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+
+static struct resource musb_resources[] = {
+	[0] = { /* start and end set dynamically */
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= INT_243X_HS_USB_MC,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= INT_243X_HS_USB_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static int clk_on;
+
+static int musb_set_clock(struct clk *clk, int state)
+{
+	if (state) {
+		if (clk_on > 0)
+			return -ENODEV;
+
+		clk_enable(clk);
+		clk_on = 1;
+	} else {
+		if (clk_on == 0)
+			return -ENODEV;
+
+		clk_disable(clk);
+		clk_on = 0;
+	}
+
+	return 0;
+}
+
+static struct musb_hdrc_eps_bits musb_eps[] = {
+	{	"ep1_tx", 10,	},
+	{	"ep1_rx", 10,	},
+	{	"ep2_tx", 9,	},
+	{	"ep2_rx", 9,	},
+	{	"ep3_tx", 3,	},
+	{	"ep3_rx", 3,	},
+	{	"ep4_tx", 3,	},
+	{	"ep4_rx", 3,	},
+	{	"ep5_tx", 3,	},
+	{	"ep5_rx", 3,	},
+	{	"ep6_tx", 3,	},
+	{	"ep6_rx", 3,	},
+	{	"ep7_tx", 3,	},
+	{	"ep7_rx", 3,	},
+	{	"ep8_tx", 2,	},
+	{	"ep8_rx", 2,	},
+	{	"ep9_tx", 2,	},
+	{	"ep9_rx", 2,	},
+	{	"ep10_tx", 2,	},
+	{	"ep10_rx", 2,	},
+	{	"ep11_tx", 2,	},
+	{	"ep11_rx", 2,	},
+	{	"ep12_tx", 2,	},
+	{	"ep12_rx", 2,	},
+	{	"ep13_tx", 2,	},
+	{	"ep13_rx", 2,	},
+	{	"ep14_tx", 2,	},
+	{	"ep14_rx", 2,	},
+	{	"ep15_tx", 2,	},
+	{	"ep15_rx", 2,	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 1,
+	.dyn_fifo	= 1,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 16,
+	.dma_channels	= 7,
+	.dma_req_chan	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
+	.ram_bits	= 12,
+	.eps_bits	= musb_eps,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#ifdef CONFIG_USB_MUSB_OTG
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	/* .clock is set dynamically */
+	.set_clock	= musb_set_clock,
+	.config		= &musb_config,
+
+	/* REVISIT charge pump on TWL4030 can supply up to
+	 * 100 mA ... but this value is board-specific, like
+	 * "mode", and should be passed to usb_musb_init().
+	 */
+	.power		= 50,			/* up to 100 mA */
+};
+
+static u64 musb_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+
+#ifdef CONFIG_NOP_USB_XCEIV
+static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device nop_xceiv_device = {
+	.name		= "nop_usb_xceiv",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &nop_xceiv_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= NULL,
+	},
+};
+#endif
+
+void __init usb_musb_init(void)
+{
+	if (cpu_is_omap243x())
+		musb_resources[0].start = OMAP243X_HS_BASE;
+	else
+		musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
+	musb_resources[0].end = musb_resources[0].start + SZ_8K - 1;
+
+	/*
+	 * REVISIT: This line can be removed once all the platforms using
+	 * musb_core.c have been converted to use use clkdev.
+	 */
+	musb_plat.clock = "ick";
+
+#ifdef CONFIG_NOP_USB_XCEIV
+	if (platform_device_register(&nop_xceiv_device) < 0) {
+		printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
+		return;
+	}
+#endif
+
+	if (platform_device_register(&musb_device) < 0) {
+		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+		return;
+	}
+}
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index f59a8d0e082..2c7035d8dcb 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -71,6 +71,7 @@ config MACH_WRT350N_V2
 
 config MACH_TS78XX
 	bool "Technologic Systems TS-78xx"
+	select PM
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-78xx platform.
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0a623379789..8a0e49d8425 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -431,6 +431,10 @@ void __init orion5x_uart1_init(void)
 /*****************************************************************************
  * XOR engine
  ****************************************************************************/
+struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+	.dram		= &orion5x_mbus_dram_info,
+};
+
 static struct resource orion5x_xor_shared_resources[] = {
 	{
 		.name	= "xor low",
@@ -448,6 +452,9 @@ static struct resource orion5x_xor_shared_resources[] = {
 static struct platform_device orion5x_xor_shared = {
 	.name		= MV_XOR_SHARED_NAME,
 	.id		= 0,
+	.dev		= {
+		.platform_data	= &orion5x_xor_shared_data,
+	},
 	.num_resources	= ARRAY_SIZE(orion5x_xor_shared_resources),
 	.resource	= orion5x_xor_shared_resources,
 };
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 0722d6510df..b31ca4cef36 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -76,7 +76,7 @@ static int __init dns323_dev_id(void)
 
 static int __init dns323_pci_init(void)
 {
-	/* The 5182 doesn't really use it's PCI bus, and initialising PCI
+	/* The 5182 doesn't really use its PCI bus, and initialising PCI
 	 * gets in the way of initialising the SATA controller.
 	 */
 	if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
@@ -418,7 +418,7 @@ static void __init dns323_init(void)
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	/* The 5182 has it's SATA controller on-chip, and needs it's own little
+	/* The 5182 has its SATA controller on-chip, and needs its own little
 	 * init routine.
 	 */
 	if (dns323_dev_id() == MV88F5182_DEV_ID)
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 08e43075789..9b8db1dcfa8 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -19,7 +19,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Enable and issue soft reset
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index e0c43b8beb7..c9bf6b81a80 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = {
 
 static void lsmini_power_off(void)
 {
-	arch_reset(0);
+	arch_reset(0, NULL);
 }
 
 
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
new file mode 100644
index 00000000000..0f9cdf45895
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -0,0 +1,35 @@
+#define FPGAID(_magic, _rev) ((_magic << 8) + _rev)
+
+/*
+ * get yer id's from http://ts78xx.digriz.org.uk/
+ * do *not* make up your own or 'borrow' any!
+ */
+enum fpga_ids {
+	/* Technologic Systems */
+	TS7800_REV_1	= FPGAID(0x00b480, 0x01),
+	TS7800_REV_2	= FPGAID(0x00b480, 0x02),
+	TS7800_REV_3	= FPGAID(0x00b480, 0x03),
+	TS7800_REV_4	= FPGAID(0x00b480, 0x04),
+	TS7800_REV_5	= FPGAID(0x00b480, 0x05),
+
+	/* Unaffordable & Expensive */
+	UAE_DUMMY	= FPGAID(0xffffff, 0x01),
+};
+
+struct fpga_device {
+	unsigned		present:1;
+	unsigned		init:1;
+};
+
+struct fpga_devices {
+	/* Technologic Systems */
+	struct fpga_device 	ts_rtc;
+	struct fpga_device 	ts_nand;
+};
+
+struct ts78xx_fpga_data {
+	unsigned int		id;
+	int			state;
+
+	struct fpga_devices	supports;
+};
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 1368e9fd1a0..9a6b397f972 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -10,17 +10,20 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sysfs.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/m48t86.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "ts78xx-fpga.h"
 
 /*****************************************************************************
  * TS-78xx Info
@@ -33,18 +36,11 @@
 #define TS78XX_FPGA_REGS_VIRT_BASE	0xff900000
 #define TS78XX_FPGA_REGS_SIZE		SZ_1M
 
-#define TS78XX_FPGA_REGS_SYSCON_ID	(TS78XX_FPGA_REGS_VIRT_BASE | 0x000)
-#define TS78XX_FPGA_REGS_SYSCON_LCDI	(TS78XX_FPGA_REGS_VIRT_BASE | 0x004)
-#define TS78XX_FPGA_REGS_SYSCON_LCDO	(TS78XX_FPGA_REGS_VIRT_BASE | 0x008)
-
-#define TS78XX_FPGA_REGS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
-#define TS78XX_FPGA_REGS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
-
-/*
- * 512kB NOR flash Device
- */
-#define TS78XX_NOR_BOOT_BASE		0xff800000
-#define TS78XX_NOR_BOOT_SIZE		SZ_512K
+static struct ts78xx_fpga_data ts78xx_fpga = {
+	.id		= 0,
+	.state		= 1,
+/*	.supports	= ... - populated by ts78xx_fpga_supports() */
+};
 
 /*****************************************************************************
  * I/O Address Mapping
@@ -65,73 +61,47 @@ void __init ts78xx_map_io(void)
 }
 
 /*****************************************************************************
- * 512kB NOR Boot Flash - the chip is a M25P40
+ * Ethernet
  ****************************************************************************/
-static struct mtd_partition ts78xx_nor_boot_flash_resources[] = {
-	{
-		.name		= "ts-bootrom",
-		.offset		= 0,
-		/* only the first 256kB is used */
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data ts78xx_nor_boot_flash_data = {
-	.width		= 1,
-	.parts		= ts78xx_nor_boot_flash_resources,
-	.nr_parts	= ARRAY_SIZE(ts78xx_nor_boot_flash_resources),
-};
-
-static struct resource ts78xx_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= TS78XX_NOR_BOOT_BASE,
-	.end		= TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device ts78xx_nor_boot_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ts78xx_nor_boot_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ts78xx_nor_boot_flash_resource,
+static struct mv643xx_eth_platform_data ts78xx_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
 /*****************************************************************************
- * Ethernet
+ * SATA
  ****************************************************************************/
-static struct mv643xx_eth_platform_data ts78xx_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+static struct mv_sata_platform_data ts78xx_sata_data = {
+	.n_ports	= 2,
 };
 
 /*****************************************************************************
  * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
  ****************************************************************************/
-#ifdef CONFIG_RTC_DRV_M48T86
-static unsigned char ts78xx_rtc_readbyte(unsigned long addr)
+#define TS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
+#define TS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+
+static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr)
 {
-	writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
-	return readb(TS78XX_FPGA_REGS_RTC_DATA);
+	writeb(addr, TS_RTC_CTRL);
+	return readb(TS_RTC_DATA);
 }
 
-static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr)
+static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr)
 {
-	writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
-	writeb(value, TS78XX_FPGA_REGS_RTC_DATA);
+	writeb(addr, TS_RTC_CTRL);
+	writeb(value, TS_RTC_DATA);
 }
 
-static struct m48t86_ops ts78xx_rtc_ops = {
-	.readbyte	= ts78xx_rtc_readbyte,
-	.writebyte	= ts78xx_rtc_writebyte,
+static struct m48t86_ops ts78xx_ts_rtc_ops = {
+	.readbyte	= ts78xx_ts_rtc_readbyte,
+	.writebyte	= ts78xx_ts_rtc_writebyte,
 };
 
-static struct platform_device ts78xx_rtc_device = {
+static struct platform_device ts78xx_ts_rtc_device = {
 	.name		= "rtc-m48t86",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &ts78xx_rtc_ops,
+		.platform_data	= &ts78xx_ts_rtc_ops,
 	},
 	.num_resources	= 0,
 };
@@ -146,59 +116,314 @@ static struct platform_device ts78xx_rtc_device = {
  * TODO: track down a guinea pig without an RTC to see if we can work out a
  * 		better RTC detection routine
  */
-static int __init ts78xx_rtc_init(void)
+static int ts78xx_ts_rtc_load(void)
 {
+	int rc;
 	unsigned char tmp_rtc0, tmp_rtc1;
 
-	tmp_rtc0 = ts78xx_rtc_readbyte(126);
-	tmp_rtc1 = ts78xx_rtc_readbyte(127);
-
-	ts78xx_rtc_writebyte(0x00, 126);
-	ts78xx_rtc_writebyte(0x55, 127);
-	if (ts78xx_rtc_readbyte(127) == 0x55) {
-		ts78xx_rtc_writebyte(0xaa, 127);
-		if (ts78xx_rtc_readbyte(127) == 0xaa
-				&& ts78xx_rtc_readbyte(126) == 0x00) {
-			ts78xx_rtc_writebyte(tmp_rtc0, 126);
-			ts78xx_rtc_writebyte(tmp_rtc1, 127);
-			platform_device_register(&ts78xx_rtc_device);
-			return 1;
+	tmp_rtc0 = ts78xx_ts_rtc_readbyte(126);
+	tmp_rtc1 = ts78xx_ts_rtc_readbyte(127);
+
+	ts78xx_ts_rtc_writebyte(0x00, 126);
+	ts78xx_ts_rtc_writebyte(0x55, 127);
+	if (ts78xx_ts_rtc_readbyte(127) == 0x55) {
+		ts78xx_ts_rtc_writebyte(0xaa, 127);
+		if (ts78xx_ts_rtc_readbyte(127) == 0xaa
+				&& ts78xx_ts_rtc_readbyte(126) == 0x00) {
+			ts78xx_ts_rtc_writebyte(tmp_rtc0, 126);
+			ts78xx_ts_rtc_writebyte(tmp_rtc1, 127);
+
+			if (ts78xx_fpga.supports.ts_rtc.init == 0) {
+				rc = platform_device_register(&ts78xx_ts_rtc_device);
+				if (!rc)
+					ts78xx_fpga.supports.ts_rtc.init = 1;
+			} else
+				rc = platform_device_add(&ts78xx_ts_rtc_device);
+
+			return rc;
 		}
 	}
 
-	return 0;
+	return -ENODEV;
 };
-#else
-static int __init ts78xx_rtc_init(void)
+
+static void ts78xx_ts_rtc_unload(void)
 {
-	return 0;
+	platform_device_del(&ts78xx_ts_rtc_device);
 }
-#endif
 
 /*****************************************************************************
- * SATA
+ * NAND Flash
  ****************************************************************************/
-static struct mv_sata_platform_data ts78xx_sata_data = {
-	.n_ports	= 2,
+#define TS_NAND_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x800)	/* VIRT */
+#define TS_NAND_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x804)	/* PHYS */
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 0
+ */
+static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+			unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		unsigned char bits;
+
+		bits = (ctrl & NAND_NCE) << 2;
+		bits |= ctrl & NAND_CLE;
+		bits |= (ctrl & NAND_ALE) >> 2;
+
+		writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL);
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
+{
+	return readb(TS_NAND_CTRL) & 0x20;
+}
+
+const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition ts78xx_ts_nand_parts[] = {
+	{
+		.name		= "mbr",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	}, {
+		.name		= "initrd",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	}, {
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	}
 };
 
+static struct platform_nand_data ts78xx_ts_nand_data = {
+	.chip	= {
+		.part_probe_types	= ts_nand_part_probes,
+		.partitions		= ts78xx_ts_nand_parts,
+		.nr_partitions		= ARRAY_SIZE(ts78xx_ts_nand_parts),
+		.chip_delay		= 15,
+		.options		= NAND_USE_FLASH_BBT,
+	},
+	.ctrl	= {
+		/*
+		 * The HW ECC offloading functions, used to give about a 9%
+		 * performance increase for 'dd if=/dev/mtdblockX' and 5% for
+		 * nanddump.  This all however was changed by git commit
+		 * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is
+		 * no performance advantage to be had so we no longer bother
+		 */
+		.cmd_ctrl		= ts78xx_ts_nand_cmd_ctrl,
+		.dev_ready		= ts78xx_ts_nand_dev_ready,
+	},
+};
+
+static struct resource ts78xx_ts_nand_resources = {
+	.start		= TS_NAND_DATA,
+	.end		= TS_NAND_DATA + 4,
+	.flags		= IORESOURCE_IO,
+};
+
+static struct platform_device ts78xx_ts_nand_device = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_ts_nand_data,
+	},
+	.resource	= &ts78xx_ts_nand_resources,
+	.num_resources	= 1,
+};
+
+static int ts78xx_ts_nand_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_nand.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_nand_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_nand.init = 1;
+	} else
+		rc = platform_device_add(&ts78xx_ts_nand_device);
+
+	return rc;
+};
+
+static void ts78xx_ts_nand_unload(void)
+{
+	platform_device_del(&ts78xx_ts_nand_device);
+}
+
 /*****************************************************************************
- * print some information regarding the board
+ * FPGA 'hotplug' support code
  ****************************************************************************/
-static void __init ts78xx_print_board_id(void)
+static void ts78xx_fpga_devices_zero_init(void)
 {
-	unsigned int board_info;
-
-	board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID);
-	printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ",
-				board_info & 0xff,
-				(board_info >> 8) & 0xffffff);
-	board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI);
-	printk("JP1=%d, JP2=%d\n",
-				(board_info >> 30) & 0x1,
-				(board_info >> 31) & 0x1);
+	ts78xx_fpga.supports.ts_rtc.init = 0;
+	ts78xx_fpga.supports.ts_nand.init = 0;
+}
+
+static void ts78xx_fpga_supports(void)
+{
+	/* TODO: put this 'table' into ts78xx-fpga.h */
+	switch (ts78xx_fpga.id) {
+	case TS7800_REV_1:
+	case TS7800_REV_2:
+	case TS7800_REV_3:
+	case TS7800_REV_4:
+	case TS7800_REV_5:
+		ts78xx_fpga.supports.ts_rtc.present = 1;
+		ts78xx_fpga.supports.ts_nand.present = 1;
+		break;
+	default:
+		ts78xx_fpga.supports.ts_rtc.present = 0;
+		ts78xx_fpga.supports.ts_nand.present = 0;
+	}
+}
+
+static int ts78xx_fpga_load_devices(void)
+{
+	int tmp, ret = 0;
+
+	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
+		tmp = ts78xx_ts_rtc_load();
+		if (tmp) {
+			printk(KERN_INFO "TS-78xx: RTC not registered\n");
+			ts78xx_fpga.supports.ts_rtc.present = 0;
+		}
+		ret |= tmp;
+	}
+	if (ts78xx_fpga.supports.ts_nand.present == 1) {
+		tmp = ts78xx_ts_nand_load();
+		if (tmp) {
+			printk(KERN_INFO "TS-78xx: NAND not registered\n");
+			ts78xx_fpga.supports.ts_nand.present = 0;
+		}
+		ret |= tmp;
+	}
+
+	return ret;
+}
+
+static int ts78xx_fpga_unload_devices(void)
+{
+	int ret = 0;
+
+	if (ts78xx_fpga.supports.ts_rtc.present == 1)
+		ts78xx_ts_rtc_unload();
+	if (ts78xx_fpga.supports.ts_nand.present == 1)
+		ts78xx_ts_nand_unload();
+
+	return ret;
+}
+
+static int ts78xx_fpga_load(void)
+{
+	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+	printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+			(ts78xx_fpga.id >> 8) & 0xffffff,
+			ts78xx_fpga.id & 0xff);
+
+	ts78xx_fpga_supports();
+
+	if (ts78xx_fpga_load_devices()) {
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	return 0;
 };
 
+static int ts78xx_fpga_unload(void)
+{
+	unsigned int fpga_id;
+
+	fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+	/*
+	 * There does not seem to be a feasible way to block access to the GPIO
+	 * pins from userspace (/dev/mem).  This if clause should hopefully warn
+	 * those foolish enough not to follow 'policy' :)
+	 *
+	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
+	 */
+	if (ts78xx_fpga.id != fpga_id) {
+		printk(KERN_ERR	"TS-78xx FPGA: magic/rev mismatch\n"
+			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
+			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
+			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	if (ts78xx_fpga_unload_devices()) {
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	return 0;
+};
+
+static ssize_t ts78xx_fpga_show(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+	if (ts78xx_fpga.state < 0)
+		return sprintf(buf, "borked\n");
+
+	return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline");
+}
+
+static ssize_t ts78xx_fpga_store(struct kobject *kobj,
+			struct kobj_attribute *attr, const char *buf, size_t n)
+{
+	int value, ret;
+
+	if (ts78xx_fpga.state < 0) {
+		printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+		return -EBUSY;
+	}
+
+	if (strncmp(buf, "online", sizeof("online") - 1) == 0)
+		value = 1;
+	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
+		value = 0;
+	else {
+		printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+		return -EINVAL;
+	}
+
+	if (ts78xx_fpga.state == value)
+		return n;
+
+	ret = (ts78xx_fpga.state == 0)
+		? ts78xx_fpga_load()
+		: ts78xx_fpga_unload();
+
+	if (!(ret < 0))
+		ts78xx_fpga.state = value;
+
+	return n;
+}
+
+static struct kobj_attribute ts78xx_fpga_attr =
+	__ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store);
+
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
@@ -223,30 +448,29 @@ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
 	{ 17, MPP_UART },
 	{ 18, MPP_UART },
 	{ 19, MPP_UART },
+	/*
+	 * MPP[20] PCI Clock Out 1
+	 * MPP[21] PCI Clock Out 0
+	 * MPP[22] Unused
+	 * MPP[23] Unused
+	 * MPP[24] Unused
+	 * MPP[25] Unused
+	 */
 	{ -1 },
 };
 
 static void __init ts78xx_init(void)
 {
+	int ret;
+
 	/*
 	 * Setup basic Orion functions. Need to be called early.
 	 */
 	orion5x_init();
 
-	ts78xx_print_board_id();
-
 	orion5x_mpp_conf(ts78xx_mpp_modes);
 
 	/*
-	 * MPP[20] PCI Clock Out 1
-	 * MPP[21] PCI Clock Out 0
-	 * MPP[22] Unused
-	 * MPP[23] Unused
-	 * MPP[24] Unused
-	 * MPP[25] Unused
-	 */
-
-	/*
 	 * Configure peripherals.
 	 */
 	orion5x_ehci0_init();
@@ -257,12 +481,12 @@ static void __init ts78xx_init(void)
 	orion5x_uart1_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
-				   TS78XX_NOR_BOOT_SIZE);
-	platform_device_register(&ts78xx_nor_boot_flash);
-
-	if (!ts78xx_rtc_init())
-		printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+	/* FPGA init */
+	ts78xx_fpga_devices_zero_init();
+	ret = ts78xx_fpga_load();
+	ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
+	if (ret)
+		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
 }
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index e12e7abfcbc..5dda2bb55f8 100644
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -30,7 +30,7 @@ static void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8eea7306f29..96a2006cb59 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -40,6 +40,9 @@ choice
 config GUMSTIX_AM200EPD
 	bool "Enable AM200EPD board support"
 
+config GUMSTIX_AM300EPD
+	bool "Enable AM300EPD board support"
+
 endchoice
 
 config MACH_INTELMOTE2
@@ -254,10 +257,24 @@ config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
 
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
+	select PXA27x
+
 config MACH_COLIBRI
-	bool "Toradex Colibri PX27x"
+	bool "Toradex Colibri PXA270"
 	select PXA27x
 
+config MACH_COLIBRI300
+	bool "Toradex Colibri PXA300/310"
+	select PXA3xx
+	select CPU_PXA300
+
+config MACH_COLIBRI320
+	bool "Toradex Colibri PXA320"
+	select PXA3xx
+	select CPU_PXA320
+
 config MACH_ZYLONITE
 	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
@@ -295,8 +312,15 @@ config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
 	select IWMMXT
+	select PXA_SSP
+	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+	select FB_W100
+
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
 	select PXA27x
@@ -319,6 +343,16 @@ config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
 
+config MACH_PALMT5
+	bool "Palm Tungsten|T5"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+	  handheld computer.
+
 config MACH_PALMTX
 	bool "Palm T|X"
 	default y
@@ -339,6 +373,16 @@ config MACH_PALMZ72
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
 
+config MACH_PALMLD
+	bool "Palm LifeDrive"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
@@ -359,6 +403,18 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
+
+config CSB726_CSB701
+	bool "Enable supprot for CSB701 baseboard"
+	depends on MACH_CSB726
+
 config PXA_EZX
 	bool "Motorola EZX Platform"
 	select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 7b28bb561d6..c80e1bac494 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,8 +3,8 @@
 #
 
 # Common support (must be linked before board specific support)
-obj-y				+= clock.o devices.o generic.o irq.o dma.o \
-				   time.o gpio.o reset.o
+obj-y				+= clock.o devices.o generic.o irq.o \
+				   time.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
 ifeq ($(CONFIG_CPU_FREQ),y)
@@ -28,13 +28,16 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
-obj-$(CONFIG_MACH_COLIBRI)	+= colibri.o
+obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
+obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
@@ -45,6 +48,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
 obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
@@ -53,7 +57,9 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
+obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
 obj-$(CONFIG_ARCH_VIPER)	+= viper.o
 
@@ -71,6 +77,8 @@ obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_CSB726)	+= csb726.o
+obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 77ee80e5e47..3499fada73a 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
+#include <mach/pxa25x.h>
 #include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
 #include <mach/pxafb.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
new file mode 100644
index 00000000000..4bd10a17332
--- /dev/null
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -0,0 +1,295 @@
+/*
+ * am300epd.c -- Platform device for AM300 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+
+#include <video/broadsheetfb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am300_device;
+static struct broadsheet_board am300_board;
+
+static unsigned long am300_pin_config[] __initdata = {
+	GPIO16_GPIO,
+	GPIO17_GPIO,
+	GPIO32_GPIO,
+	GPIO48_GPIO,
+	GPIO49_GPIO,
+	GPIO51_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+	GPIO76_GPIO,
+	GPIO77_GPIO,
+
+	/* this is the 16-bit hdb bus 58-73 */
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+};
+
+/* register offsets for gpio control */
+#define PWR_GPIO_PIN	16
+#define CFG_GPIO_PIN	17
+#define RDY_GPIO_PIN	32
+#define DC_GPIO_PIN	48
+#define RST_GPIO_PIN	49
+#define LED_GPIO_PIN	51
+#define RD_GPIO_PIN	74
+#define WR_GPIO_PIN	75
+#define CS_GPIO_PIN	76
+#define IRQ_GPIO_PIN	77
+
+/* hdb bus */
+#define DB0_GPIO_PIN	58
+#define DB15_GPIO_PIN	73
+
+static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
+			RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
+			IRQ_GPIO_PIN, LED_GPIO_PIN };
+static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
+				"CS", "IRQ", "LED" };
+
+static int am300_wait_event(struct broadsheetfb_par *par)
+{
+	/* todo: improve err recovery */
+	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
+	return 0;
+}
+
+static int am300_init_gpio_regs(struct broadsheetfb_par *par)
+{
+	int i;
+	int err;
+	char dbname[8];
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		err = gpio_request(gpios[i], gpio_names[i]);
+		if (err) {
+			dev_err(&am300_device->dev, "failed requesting "
+				"gpio %s, err=%d\n", gpio_names[i], err);
+			goto err_req_gpio;
+		}
+	}
+
+	/* we also need to take care of the hdb bus */
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
+		sprintf(dbname, "DB%d", i);
+		err = gpio_request(i, dbname);
+		if (err) {
+			dev_err(&am300_device->dev, "failed requesting "
+				"gpio %d, err=%d\n", i, err);
+			while (i >= DB0_GPIO_PIN)
+				gpio_free(i--);
+			i = ARRAY_SIZE(gpios) - 1;
+			goto err_req_gpio;
+		}
+	}
+
+	/* setup the outputs and init values */
+	gpio_direction_output(PWR_GPIO_PIN, 0);
+	gpio_direction_output(CFG_GPIO_PIN, 1);
+	gpio_direction_output(DC_GPIO_PIN, 0);
+	gpio_direction_output(RD_GPIO_PIN, 1);
+	gpio_direction_output(WR_GPIO_PIN, 1);
+	gpio_direction_output(CS_GPIO_PIN, 1);
+	gpio_direction_output(RST_GPIO_PIN, 0);
+
+	/* setup the inputs */
+	gpio_direction_input(RDY_GPIO_PIN);
+	gpio_direction_input(IRQ_GPIO_PIN);
+
+	/* start the hdb bus as an input */
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+		gpio_direction_output(i, 0);
+
+	/* go into command mode */
+	gpio_set_value(CFG_GPIO_PIN, 1);
+	gpio_set_value(RST_GPIO_PIN, 0);
+	msleep(10);
+	gpio_set_value(RST_GPIO_PIN, 1);
+	msleep(10);
+	am300_wait_event(par);
+
+	return 0;
+
+err_req_gpio:
+	while (i > 0)
+		gpio_free(gpios[i--]);
+
+	return err;
+}
+
+static int am300_init_board(struct broadsheetfb_par *par)
+{
+	return am300_init_gpio_regs(par);
+}
+
+static void am300_cleanup(struct broadsheetfb_par *par)
+{
+	int i;
+
+	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++)
+		gpio_free(gpios[i]);
+
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+		gpio_free(i);
+
+}
+
+static u16 am300_get_hdb(struct broadsheetfb_par *par)
+{
+	u16 res = 0;
+	int i;
+
+	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+		res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
+
+	return res;
+}
+
+static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
+{
+	int i;
+
+	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+		gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
+}
+
+
+static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
+				u8 state)
+{
+	switch (bit) {
+	case BS_CS:
+		gpio_set_value(CS_GPIO_PIN, state);
+		break;
+	case BS_DC:
+		gpio_set_value(DC_GPIO_PIN, state);
+		break;
+	case BS_WR:
+		gpio_set_value(WR_GPIO_PIN, state);
+		break;
+	}
+}
+
+static int am300_get_panel_type(void)
+{
+	return panel_type;
+}
+
+static irqreturn_t am300_handle_irq(int irq, void *dev_id)
+{
+	struct broadsheetfb_par *par = dev_id;
+
+	wake_up(&par->waitq);
+	return IRQ_HANDLED;
+}
+
+static int am300_setup_irq(struct fb_info *info)
+{
+	int ret;
+	struct broadsheetfb_par *par = info->par;
+
+	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+				IRQF_DISABLED|IRQF_TRIGGER_RISING,
+				"AM300", par);
+	if (ret)
+		dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
+
+	return ret;
+}
+
+static struct broadsheet_board am300_board = {
+	.owner			= THIS_MODULE,
+	.init			= am300_init_board,
+	.cleanup		= am300_cleanup,
+	.set_hdb		= am300_set_hdb,
+	.get_hdb		= am300_get_hdb,
+	.set_ctl		= am300_set_ctl,
+	.wait_for_rdy		= am300_wait_event,
+	.get_panel_type		= am300_get_panel_type,
+	.setup_irq		= am300_setup_irq,
+};
+
+int __init am300_init(void)
+{
+	int ret;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
+
+	/* request our platform independent driver */
+	request_module("broadsheetfb");
+
+	am300_device = platform_device_alloc("broadsheetfb", -1);
+	if (!am300_device)
+		return -ENOMEM;
+
+	/* the am300_board that will be seen by broadsheetfb is a copy */
+	platform_device_add_data(am300_device, &am300_board,
+					sizeof(am300_board));
+
+	ret = platform_device_add(am300_device);
+
+	if (ret) {
+		platform_device_put(am300_device);
+		return ret;
+	}
+
+	return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+MODULE_DESCRIPTION("board driver for am300 epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 40b77408451..db52d2c4791 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -87,7 +87,7 @@ void clks_register(struct clk_lookup *clks, size_t num)
 		clkdev_add(&clks[i]);
 }
 
-int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
 	struct device *dev)
 {
 	struct clk *r = clk_get(dev, id);
@@ -96,7 +96,7 @@ int clk_add_alias(char *alias, struct device *alias_dev, char *id,
 	if (!r)
 		return -ENODEV;
 
-	l = clkdev_alloc(r, alias, alias_dev ? dev_name(alias_dev) : NULL);
+	l = clkdev_alloc(r, alias, alias_dev_name);
 	clk_put(r);
 	if (!l)
 		return -ENODEV;
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 4e9c613c676..5599bceff73 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -69,6 +69,6 @@ extern void clk_pxa3xx_cken_disable(struct clk *);
 #endif
 
 void clks_register(struct clk_lookup *clks, size_t num);
-int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+int clk_add_alias(const char *alias, const char *alias_name, char *id,
 	struct device *dev);
 
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 83a4cdf0817..253fd76142d 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -22,10 +22,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/bitfield.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index df83b97f303..34576ba5f5f 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -17,7 +17,7 @@
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
 
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 3156b25f6e9..7873fa3d8fa 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -22,7 +22,6 @@
 #include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index d99fd9e4d88..117b5435f8d 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -22,8 +22,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 
@@ -96,7 +94,7 @@ static struct resource cmx270_dm9000_resource[] = {
 };
 
 static struct dm9000_plat_data cmx270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
+	.flags		= DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device cmx2xx_dm9000_device = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index ff0c577cd1a..a9f48b1cb54 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -28,9 +28,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/mfp-pxa300.h>
-
-#include <mach/hardware.h>
+#include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
@@ -162,7 +160,7 @@ static struct resource dm9000_resources[] = {
 };
 
 static struct dm9000_plat_data cm_x300_dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device dm9000_device = {
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri-pxa270.c
index e8473624427..01bcfaae75b 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -1,7 +1,7 @@
 /*
- *  linux/arch/arm/mach-pxa/colibri.c
+ *  linux/arch/arm/mach-pxa/colibri-pxa270.c
  *
- *  Support for Toradex PXA27x based Colibri module
+ *  Support for Toradex PXA270 based Colibri module
  *  Daniel Mack <daniel@caiaq.de>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -20,6 +20,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -28,20 +29,23 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
 #include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
 
-static unsigned long colibri_pin_config[] __initdata = {
+/*
+ * GPIO configuration
+ */
+static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
 	GPIO78_nCS_2,	/* Ethernet CS */
 	GPIO114_GPIO,	/* Ethernet IRQ */
 };
 
 /*
- * Flash
+ * NOR flash
  */
 static struct mtd_partition colibri_partitions[] = {
 	{
@@ -70,39 +74,40 @@ static struct physmap_flash_data colibri_flash_data[] = {
 	}
 };
 
-static struct resource flash_resource = {
+static struct resource colibri_pxa270_flash_resource = {
 	.start	= PXA_CS0_PHYS,
 	.end	= PXA_CS0_PHYS + SZ_32M - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
-static struct platform_device flash_device = {
+static struct platform_device colibri_pxa270_flash_device = {
 	.name	= "physmap-flash",
 	.id	= 0,
 	.dev 	= {
 		.platform_data = colibri_flash_data,
 	},
-	.resource = &flash_resource,
+	.resource = &colibri_pxa270_flash_resource,
 	.num_resources = 1,
 };
 
 /*
  * DM9000 Ethernet
  */
+#if defined(CONFIG_DM9000)
 static struct resource dm9000_resources[] = {
 	[0] = {
-		.start	= COLIBRI_ETH_PHYS,
-		.end	= COLIBRI_ETH_PHYS + 3,
+		.start	= COLIBRI_PXA270_ETH_PHYS,
+		.end	= COLIBRI_PXA270_ETH_PHYS + 3,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= COLIBRI_ETH_PHYS + 4,
-		.end	= COLIBRI_ETH_PHYS + 4 + 500,
+		.start	= COLIBRI_PXA270_ETH_PHYS + 4,
+		.end	= COLIBRI_PXA270_ETH_PHYS + 4 + 500,
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
-		.start	= COLIBRI_ETH_IRQ,
-		.end	= COLIBRI_ETH_IRQ,
+		.start	= COLIBRI_PXA270_ETH_IRQ,
+		.end	= COLIBRI_PXA270_ETH_IRQ,
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
@@ -113,25 +118,28 @@ static struct platform_device dm9000_device = {
 	.num_resources	= ARRAY_SIZE(dm9000_resources),
 	.resource	= dm9000_resources,
 };
+#endif /* CONFIG_DM9000 */
 
-static struct platform_device *colibri_devices[] __initdata = {
-	&flash_device,
+static struct platform_device *colibri_pxa270_devices[] __initdata = {
+	&colibri_pxa270_flash_device,
+#if defined(CONFIG_DM9000)
 	&dm9000_device,
+#endif
 };
 
-static void __init colibri_init(void)
+static void __init colibri_pxa270_init(void)
 {
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
-
-	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
 }
 
-MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
+MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
-	.init_machine	= colibri_init,
+	.init_machine	= colibri_pxa270_init,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
new file mode 100644
index 00000000000..169ab552c21
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -0,0 +1,190 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa300.c
+ *
+ *  Support for Toradex PXA300/310 based Colibri module
+ *
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <net/ax88796.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include <mach/pxa300.h>
+#include <mach/colibri.h>
+#include <mach/ohci.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+	.flags		= AXFLG_MAC_FROMDEV,
+	.wordlength	= 2
+};
+
+static struct resource colibri_asix_resource[] = {
+	[0] = {
+		.start = PXA3xx_CS2_PHYS,
+		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device asix_device = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
+	.resource	= colibri_asix_resource,
+	.dev		= {
+		.platform_data = &colibri_asix_platdata
+	}
+};
+
+static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
+	GPIO1_nCS2,			/* AX88796 chip select */
+	GPIO26_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
+};
+
+static void __init colibri_pxa300_init_eth(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
+	set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
+	platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa300_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+};
+
+static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
+	.port_mode	= PMM_GLOBAL_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+void __init colibri_pxa300_init_ohci(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
+	pxa_set_ohci_info(&colibri_pxa300_ohci_info);
+}
+#else
+static inline void colibri_pxa300_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
+	GPIO7_MMC1_CLK,
+	GPIO14_MMC1_CMD,
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO62_LCD_CS_N,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+	GPIO76_LCD_VSYNC,
+};
+
+static void __init colibri_pxa300_init_lcd(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
+}
+
+#else
+static inline void colibri_pxa300_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
+	GPIO24_AC97_SYSCLK,
+	GPIO23_AC97_nACRESET,
+	GPIO25_AC97_SDATA_IN_0,
+	GPIO27_AC97_SDATA_OUT,
+	GPIO28_AC97_SYNC,
+	GPIO29_AC97_BITCLK
+};
+
+static inline void __init colibri_pxa310_init_ac97(void)
+{
+	/* no AC97 codec on Colibri PXA300 */
+	if (!cpu_is_pxa310())
+		return;
+
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa310_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa300_init(void)
+{
+	colibri_pxa300_init_eth();
+	colibri_pxa300_init_ohci();
+	colibri_pxa300_init_lcd();
+	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
+	colibri_pxa310_init_ac97();
+	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
+				mfp_to_gpio(MFP_PIN_GPIO13));
+}
+
+MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.init_machine	= colibri_pxa300_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
new file mode 100644
index 00000000000..573a9a1dd52
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -0,0 +1,187 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa320.c
+ *
+ *  Support for Toradex PXA320/310 based Colibri module
+ *
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <net/ax88796.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/colibri.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
+
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+	.flags		= AXFLG_MAC_FROMDEV,
+	.wordlength	= 2
+};
+
+static struct resource colibri_asix_resource[] = {
+	[0] = {
+		.start = PXA3xx_CS2_PHYS,
+		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device asix_device = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
+	.resource	= colibri_asix_resource,
+	.dev		= {
+		.platform_data = &colibri_asix_platdata
+	}
+};
+
+static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
+	GPIO3_nCS2,			/* AX88796 chip select */
+	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
+};
+
+static void __init colibri_pxa320_init_eth(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
+	set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
+	platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa320_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
+	GPIO2_2_USBH_PEN,
+	GPIO3_2_USBH_PWR,
+};
+
+static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
+	.port_mode	= PMM_GLOBAL_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+void __init colibri_pxa320_init_ohci(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
+	pxa_set_ohci_info(&colibri_pxa320_ohci_info);
+}
+#else
+static inline void colibri_pxa320_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
+	GPIO6_2_LCD_LDD_0,
+	GPIO7_2_LCD_LDD_1,
+	GPIO8_2_LCD_LDD_2,
+	GPIO9_2_LCD_LDD_3,
+	GPIO10_2_LCD_LDD_4,
+	GPIO11_2_LCD_LDD_5,
+	GPIO12_2_LCD_LDD_6,
+	GPIO13_2_LCD_LDD_7,
+	GPIO63_LCD_LDD_8,
+	GPIO64_LCD_LDD_9,
+	GPIO65_LCD_LDD_10,
+	GPIO66_LCD_LDD_11,
+	GPIO67_LCD_LDD_12,
+	GPIO68_LCD_LDD_13,
+	GPIO69_LCD_LDD_14,
+	GPIO70_LCD_LDD_15,
+	GPIO71_LCD_LDD_16,
+	GPIO72_LCD_LDD_17,
+	GPIO73_LCD_CS_N,
+	GPIO74_LCD_VSYNC,
+	GPIO14_2_LCD_FCLK,
+	GPIO15_2_LCD_LCLK,
+	GPIO16_2_LCD_PCLK,
+	GPIO17_2_LCD_BIAS,
+};
+
+static void __init colibri_pxa320_init_lcd(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
+}
+#else
+static inline void colibri_pxa320_init_lcd(void) {}
+#endif
+
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
+	GPIO34_AC97_SYSCLK,
+	GPIO35_AC97_SDATA_IN_0,
+	GPIO37_AC97_SDATA_OUT,
+	GPIO38_AC97_SYNC,
+	GPIO39_AC97_BITCLK,
+	GPIO40_AC97_nACRESET
+};
+
+static inline void __init colibri_pxa320_init_ac97(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa320_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa320_init(void)
+{
+	colibri_pxa320_init_eth();
+	colibri_pxa320_init_ohci();
+	colibri_pxa320_init_lcd();
+	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
+	colibri_pxa320_init_ac97();
+	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
+				mfp_to_gpio(MFP_PIN_GPIO28));
+}
+
+MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.init_machine	= colibri_pxa320_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
new file mode 100644
index 00000000000..12d0afc54aa
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -0,0 +1,121 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa3xx.c
+ *
+ *  Common functions for all Toradex PXA3xx modules
+ *
+ *  Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int mmc_detect_pin;
+
+static int colibri_pxa3xx_mci_init(struct device *dev,
+				   irq_handler_t colibri_mmc_detect_int,
+				   void *data)
+{
+	int ret;
+
+	ret = gpio_request(mmc_detect_pin, "mmc card detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(mmc_detect_pin);
+	ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "MMC card detect", data);
+	if (ret) {
+		gpio_free(mmc_detect_pin);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
+{
+	free_irq(mmc_detect_pin, data);
+	gpio_free(gpio_to_irq(mmc_detect_pin));
+}
+
+static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init		= colibri_pxa3xx_mci_init,
+	.exit		= colibri_pxa3xx_mci_exit,
+};
+
+void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
+{
+	pxa3xx_mfp_config(pins, len);
+	mmc_detect_pin = detect_pin;
+	pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
+}
+#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static int lcd_bl_pin;
+
+/*
+ * LCD panel (Sharp LQ043T3DX02)
+ */
+static void colibri_lcd_backlight(int on)
+{
+	gpio_set_value(lcd_bl_pin, !!on);
+}
+
+static struct pxafb_mode_info sharp_lq43_mode = {
+	.pixclock	= 101936,
+	.xres		= 480,
+	.yres		= 272,
+	.bpp		= 32,
+	.depth		= 18,
+	.hsync_len      = 41,
+	.left_margin    = 2,
+	.right_margin   = 2,
+	.vsync_len      = 10,
+	.upper_margin   = 2,
+	.lower_margin   = 2,
+	.sync	   	= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lq43_info = {
+	.modes		= &sharp_lq43_mode,
+	.num_modes	= 1,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+	.pxafb_backlight_power = colibri_lcd_backlight,
+};
+
+void __init colibri_pxa3xx_init_lcd(int bl_pin)
+{
+	lcd_bl_pin = bl_pin;
+	gpio_request(bl_pin, "lcd backlight");
+	gpio_direction_output(bl_pin, 0);
+	set_pxa_fb_info(&sharp_lq43_info);
+}
+#endif
+
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a8d91b6c136..cdf21dd135b 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -41,9 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
@@ -637,16 +635,16 @@ static void corgi_poweroff(void)
 		/* Green LED off tells the bootloader to halt */
 		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
 
-	arm_machine_restart('h');
+	arm_machine_restart('h', NULL);
 }
 
-static void corgi_restart(char mode)
+static void corgi_restart(char mode, const char *cmd)
 {
 	if (!machine_is_corgi())
 		/* Green LED on tells the bootloader to reboot */
 		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
 
-	arm_machine_restart('h');
+	arm_machine_restart('h', cmd);
 }
 
 static void __init corgi_init(void)
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 411607bc1fc..d9b96319d49 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -22,7 +22,6 @@
 #include <linux/string.h>
 #include <mach/corgi.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e3525903281..7f04b3a761d 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -24,7 +24,6 @@
 
 #include <mach/sharpsl.h>
 #include <mach/corgi.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 8e2f2215c4b..a5ee70735e0 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -20,7 +20,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/ssp.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/regs-ssp.h>
 #include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 771dd4eac93..083a1d851d4 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -37,8 +37,6 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 968c8309ec3..67f34a8d8e6 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -15,8 +15,6 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa3xx-regs.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
new file mode 100644
index 00000000000..4a2a2952c37
--- /dev/null
+++ b/arch/arm/mach-pxa/csb701.c
@@ -0,0 +1,61 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+static struct gpio_keys_button csb701_buttons[] = {
+	{
+		.code	= 0x7,
+		.gpio	= 1,
+		.active_low = 1,
+		.desc	= "SW2",
+		.type	= EV_SW,
+		.wakeup = 1,
+	},
+};
+
+static struct gpio_keys_platform_data csb701_gpio_keys_data = {
+	.buttons = csb701_buttons,
+	.nbuttons = ARRAY_SIZE(csb701_buttons),
+};
+
+static struct gpio_led csb701_leds[] = {
+	{
+		.name	= "csb701:yellow:heartbeat",
+		.default_trigger = "heartbeat",
+		.gpio	= 11,
+		.active_low = 1,
+	},
+};
+
+static struct platform_device csb701_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev.platform_data = &csb701_gpio_keys_data,
+};
+
+static struct gpio_led_platform_data csb701_leds_gpio_data = {
+	.leds		= csb701_leds,
+	.num_leds	= ARRAY_SIZE(csb701_leds),
+};
+
+static struct platform_device csb701_leds_gpio = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev.platform_data = &csb701_leds_gpio_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&csb701_gpio_keys,
+	&csb701_leds_gpio,
+};
+
+static int __init csb701_init(void)
+{
+	return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+module_init(csb701_init);
+
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
new file mode 100644
index 00000000000..2b289f83a61
--- /dev/null
+++ b/arch/arm/mach-pxa/csb726.c
@@ -0,0 +1,318 @@
+/*
+ *  Support for Cogent CSB726
+ *
+ *  Copyright (c) 2008 Dmitry Eremin-Solenikov
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sm501.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/csb726.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
+ * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
+ * XXX: 21,
+ * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
+ * XXX: 33 CS_5 for LAN9215 on R1
+ */
+
+static unsigned long csb726_pin_config[] = {
+	GPIO78_nCS_2, /* EXP_CS */
+	GPIO79_nCS_3, /* SMSC9215 */
+	GPIO80_nCS_4, /* SM501 */
+
+	GPIO52_GPIO, /* #SMSC9251 int */
+	GPIO53_GPIO, /* SM501 int */
+
+	GPIO1_GPIO, /* GPIO0 */
+	GPIO11_GPIO, /* GPIO1 */
+	GPIO9_GPIO, /* GPIO2 */
+	GPIO10_GPIO, /* GPIO3 */
+	GPIO16_PWM0_OUT, /* or GPIO4 */
+	GPIO17_PWM1_OUT, /* or GPIO5 */
+	GPIO94_GPIO, /* GPIO6 */
+	GPIO95_GPIO, /* GPIO7 */
+	GPIO96_GPIO, /* GPIO8 */
+	GPIO97_GPIO, /* GPIO9 */
+	GPIO15_GPIO, /* EXP_IRQ */
+	GPIO18_RDY, /* EXP_WAIT */
+
+	GPIO0_GPIO, /* PWR_INT */
+	GPIO104_GPIO, /* PWR_OFF */
+
+	GPIO12_GPIO, /* touch irq */
+
+	GPIO13_SSP2_TXD,
+	GPIO14_SSP2_SFRM,
+	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
+	GPIO22_SSP2_SCLK,
+
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+	GPIO83_SSP3_SFRM,
+	GPIO84_SSP3_SCLK,
+
+	GPIO20_GPIO, /* SDIO int */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO100_GPIO, /* SD CD */
+	GPIO101_GPIO, /* SD WP */
+
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16, /* maybe unused */
+	GPIO85_nPCE_1,
+	GPIO98_GPIO, /* CF IRQ */
+	GPIO99_GPIO, /* CF CD */
+	GPIO103_GPIO, /* Reset */
+
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+
+static struct pxamci_platform_data csb726_mci_data;
+
+static int csb726_mci_init(struct device *dev,
+		irq_handler_t detect, void *data)
+{
+	int err;
+
+	csb726_mci_data.detect_delay = msecs_to_jiffies(500);
+
+	err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
+	if (err)
+		goto err_det_req;
+
+	err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
+	if (err)
+		goto err_det_dir;
+
+	err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
+	if (err)
+		goto err_ro_req;
+
+	err = gpio_direction_input(CSB726_GPIO_MMC_RO);
+	if (err)
+		goto err_ro_dir;
+
+	err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
+			IRQF_DISABLED, "MMC card detect", data);
+	if (err)
+		goto err_irq;
+
+	return 0;
+
+err_irq:
+err_ro_dir:
+	gpio_free(CSB726_GPIO_MMC_RO);
+err_ro_req:
+err_det_dir:
+	gpio_free(CSB726_GPIO_MMC_DETECT);
+err_det_req:
+	return err;
+}
+
+static int csb726_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(CSB726_GPIO_MMC_RO);
+}
+
+static void csb726_mci_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
+	gpio_free(CSB726_GPIO_MMC_RO);
+	gpio_free(CSB726_GPIO_MMC_DETECT);
+}
+
+static struct pxamci_platform_data csb726_mci = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init		= csb726_mci_init,
+	.get_ro		= csb726_mci_get_ro,
+	/* FIXME setpower */
+	.exit		= csb726_mci_exit,
+};
+
+static struct pxaohci_platform_data csb726_ohci_platform_data = {
+	.port_mode	= PMM_NPS_MODE,
+	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
+};
+
+static struct mtd_partition csb726_flash_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0,
+		.size		= CSB726_FLASH_uMON,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "root",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data csb726_flash_data = {
+	.width		= 2,
+	.parts		= csb726_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
+};
+
+static struct resource csb726_flash_resources[] = {
+	{
+		.start          = PXA_CS0_PHYS,
+		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
+		.flags          = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb726_flash = {
+	.name           = "physmap-flash",
+	.dev            = {
+		.platform_data  = &csb726_flash_data,
+	},
+	.resource       = csb726_flash_resources,
+	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
+};
+
+static struct resource csb726_sm501_resources[] = {
+	{
+		.start          = PXA_CS4_PHYS,
+		.end            = PXA_CS4_PHYS + SZ_8M - 1,
+		.flags          = IORESOURCE_MEM,
+		.name		= "sm501-localmem",
+	},
+	{
+		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
+		.end            = PXA_CS4_PHYS + SZ_64M - 1,
+		.flags          = IORESOURCE_MEM,
+		.name		= "sm501-regs",
+	},
+	{
+		.start		= CSB726_IRQ_SM501,
+		.end		= CSB726_IRQ_SM501,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct sm501_initdata csb726_sm501_initdata = {
+/*	.devices	= SM501_USE_USB_HOST, */
+	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
+};
+
+static struct sm501_platdata csb726_sm501_platdata = {
+	.init		= &csb726_sm501_initdata,
+};
+
+static struct platform_device csb726_sm501 = {
+	.name		= "sm501",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
+	.resource	= csb726_sm501_resources,
+	.dev		= {
+		.platform_data = &csb726_sm501_platdata,
+	},
+};
+
+static struct resource csb726_lan_resources[] = {
+	{
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= CSB726_IRQ_LAN,
+		.end	= CSB726_IRQ_LAN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device csb726_lan = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
+	.resource	= csb726_lan_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&csb726_flash,
+	&csb726_sm501,
+	&csb726_lan,
+};
+
+static void __init csb726_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
+/*	MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
+/*	MSC2 = 0x06697ff4; *//* none/SM501 */
+	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	pxa_set_mci_info(&csb726_mci);
+	pxa_set_ohci_info(&csb726_ohci_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(CSB726, "Cogent CSB726")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.init_machine   = csb726_init,
+	.timer          = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index e16f8e3d58d..d245e59c51b 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,7 +4,6 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 1bd7f740427..74d3f8987c5 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -20,9 +20,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index edcd9d5ce54..08003627213 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -21,9 +21,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/irqs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index 77bb8e2c48c..ed9c0c3f64a 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -22,9 +22,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/pxafb.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 6d48e00f4f0..54af7ed1397 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -24,9 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
@@ -189,7 +187,7 @@ static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
 	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", &e740_t7l66xb_device.dev,
+	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index be1ab8edb97..16ae72150b1 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -23,9 +23,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
@@ -190,7 +188,7 @@ static struct platform_device *devices[] __initdata = {
 static void __init e750_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev,
+	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index cc9b1293e86..74ab09812a7 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -23,9 +23,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irqs.h>
@@ -196,7 +194,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
-	clk_add_alias("CLK_CK3P6MI", &e800_tc6393xb_device.dev,
+	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f5ed8038ede..920dfb8d36d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -11,40 +11,63 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#include <media/soc_camera.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <mach/pxa27x_keypad.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
+#include "devices.h"
 
-/* GPIO IRQ usage */
-#define GPIO41_ETHIRQ		(41)
+/* EM-X270 specific GPIOs */
 #define GPIO13_MMC_CD		(13)
+#define GPIO95_MMC_WP		(95)
+#define GPIO56_NAND_RB		(56)
+
+/* eXeda specific GPIOs */
+#define GPIO114_MMC_CD		(114)
+#define GPIO20_NAND_RB		(20)
+#define GPIO38_SD_PWEN		(38)
+
+/* common  GPIOs */
+#define GPIO11_NAND_CS		(11)
+#define GPIO93_CAM_RESET	(93)
+#define GPIO41_ETHIRQ		(41)
 #define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
-#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
 
-/* NAND control GPIOs */
-#define GPIO11_NAND_CS	(11)
-#define GPIO56_NAND_RB	(56)
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
 
-static unsigned long em_x270_pin_config[] = {
+static unsigned long common_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
 	GPIO29_AC97_SDATA_IN_0,
@@ -150,21 +173,32 @@ static unsigned long em_x270_pin_config[] = {
 	GPIO18_RDY,
 
 	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* sleep/resume button */
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
 	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
 
 	/* NAND controls */
 	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-	GPIO56_GPIO,				/* NAND Ready/Busy */
 
 	/* interrupts */
-	GPIO13_GPIO,	/* MMC card detect */
 	GPIO41_GPIO,	/* DM9000 interrupt */
 };
 
+static unsigned long em_x270_pin_config[] = {
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO56_GPIO,	/* NAND Ready/Busy */
+	GPIO95_GPIO,	/* MMC Write protect */
+};
+
+static unsigned long exeda_pin_config[] = {
+	GPIO20_GPIO,				/* NAND Ready/Busy */
+	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
+	GPIO114_GPIO,				/* MMC card detect */
+};
+
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
@@ -185,7 +219,7 @@ static struct resource em_x270_dm9000_resource[] = {
 };
 
 static struct dm9000_plat_data em_x270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
+	.flags		= DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device em_x270_dm9000 = {
@@ -200,6 +234,7 @@ static struct platform_device em_x270_dm9000 = {
 
 static void __init em_x270_init_dm9000(void)
 {
+	em_x270_dm9000_platdata.flags |= dm9000_flags;
 	platform_device_register(&em_x270_dm9000);
 }
 #else
@@ -289,7 +324,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return gpio_get_value(GPIO56_NAND_RB);
+	return gpio_get_value(nand_rb);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -354,14 +389,14 @@ static void __init em_x270_init_nand(void)
 
 	gpio_direction_output(GPIO11_NAND_CS, 1);
 
-	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	err = gpio_request(nand_rb, "NAND R/B");
 	if (err) {
 		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
 		gpio_free(GPIO11_NAND_CS);
 		return;
 	}
 
-	gpio_direction_input(GPIO56_NAND_RB);
+	gpio_direction_input(nand_rb);
 
 	platform_device_register(&em_x270_nand);
 }
@@ -369,6 +404,61 @@ static void __init em_x270_init_nand(void)
 static inline void em_x270_init_nand(void) {}
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition em_x270_nor_parts[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00050000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Environment",
+		.offset =	0x00050000,
+		.size =		0x00010000,
+	}, {
+		.name =		"Reserved",
+		.offset =	0x00060000,
+		.size =		0x00050000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Splashscreen",
+		.offset =	0x000b0000,
+		.size =		0x00050000,
+	}
+};
+
+static struct physmap_flash_data em_x270_nor_data[] = {
+	[0] = {
+		.width = 2,
+		.parts = em_x270_nor_parts,
+		.nr_parts = ARRAY_SIZE(em_x270_nor_parts),
+	},
+};
+
+static struct resource em_x270_nor_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_1M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device em_x270_physmap_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &em_x270_nor_flash_resource,
+	.dev		= {
+		.platform_data	= &em_x270_nor_data,
+	},
+};
+
+static void __init em_x270_init_nor(void)
+{
+	platform_device_register(&em_x270_physmap_flash);
+}
+#else
+static inline void em_x270_init_nor(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
@@ -395,40 +485,93 @@ static inline void em_x270_init_ohci(void) {}
 
 /* MCI controller setup */
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
-			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+	int err;
+
+	em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+	if (IS_ERR(em_x270_sdio_ldo)) {
+		dev_err(dev, "can't request SDIO power supply: %ld\n",
+			PTR_ERR(em_x270_sdio_ldo));
+		return PTR_ERR(em_x270_sdio_ldo);
+	}
+
+	err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			      IRQF_TRIGGER_FALLING,
 			      "MMC card detect", data);
 	if (err) {
-		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
-		       __func__, err);
-		return err;
+		dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+		goto err_irq;
+	}
+
+	if (machine_is_em_x270()) {
+		err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+		if (err) {
+			dev_err(dev, "can't request MMC write protect: %d\n",
+				err);
+			goto err_gpio_wp;
+		}
+		gpio_direction_input(GPIO95_MMC_WP);
+	} else {
+		err = gpio_request(GPIO38_SD_PWEN, "sdio power");
+		if (err) {
+			dev_err(dev, "can't request MMC power control : %d\n",
+				err);
+			goto err_gpio_wp;
+		}
+		gpio_direction_output(GPIO38_SD_PWEN, 1);
 	}
 
 	return 0;
+
+err_gpio_wp:
+	free_irq(gpio_to_irq(mmc_cd), data);
+err_irq:
+	regulator_put(em_x270_sdio_ldo);
+
+	return err;
 }
 
 static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 {
-	/*
-	   FIXME: current hardware implementation does not allow to
-	   enable/disable MMC power. This will be fixed in next HW releases,
-	   and we'll need to add implmentation here.
-	*/
-	return;
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+		regulator_enable(em_x270_sdio_ldo);
+	} else {
+		regulator_disable(em_x270_sdio_ldo);
+	}
 }
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	int irq = gpio_to_irq(GPIO13_MMC_CD);
-	free_irq(irq, data);
+	free_irq(gpio_to_irq(mmc_cd), data);
+	regulator_put(em_x270_sdio_ldo);
+
+	if (machine_is_em_x270())
+		gpio_free(GPIO95_MMC_WP);
+	else
+		gpio_free(GPIO38_SD_PWEN);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO95_MMC_WP);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
+	.ocr_mask	= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+			  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+			  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+			  MMC_VDD_30_31|MMC_VDD_31_32,
 	.init 		= em_x270_mci_init,
 	.setpower 	= em_x270_mci_setpower,
 	.exit		= em_x270_mci_exit,
@@ -436,33 +579,53 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 
 static void __init em_x270_init_mmc(void)
 {
+	if (machine_is_em_x270())
+		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+
+	em_x270_mci_platform_data.detect_delay	= msecs_to_jiffies(250);
 	pxa_set_mci_info(&em_x270_mci_platform_data);
 }
 #else
 static inline void em_x270_init_mmc(void) {}
 #endif
 
-/* LCD 480x640 */
+/* LCD */
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info em_x270_lcd_mode = {
-	.pixclock	= 50000,
-	.bpp		= 16,
-	.xres		= 480,
-	.yres		= 640,
-	.hsync_len	= 8,
-	.vsync_len	= 2,
-	.left_margin	= 8,
-	.upper_margin	= 0,
-	.right_margin	= 24,
-	.lower_margin	= 4,
-	.cmap_greyscale	= 0,
+static struct pxafb_mode_info em_x270_lcd_modes[] = {
+	[0] = {
+		.pixclock	= 38250,
+		.bpp		= 16,
+		.xres		= 480,
+		.yres		= 640,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 24,
+		.lower_margin	= 4,
+		.sync		= 0,
+	},
+	[1] = {
+		.pixclock       = 153800,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 88,
+		.lower_margin	= 2,
+		.sync		= 0,
+	},
 };
 
 static struct pxafb_mach_info em_x270_lcd = {
-	.modes		= &em_x270_lcd_mode,
-	.num_modes	= 1,
+	.modes		= em_x270_lcd_modes,
+	.num_modes	= 2,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
+
 static void __init em_x270_init_lcd(void)
 {
 	set_pxa_fb_info(&em_x270_lcd);
@@ -471,6 +634,40 @@ static void __init em_x270_init_lcd(void)
 static inline void em_x270_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master em_x270_spi_info = {
+	.num_chipselect	= 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
+	.rx_threshold = 1,
+	.tx_threshold = 1,
+};
+
+static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info em_x270_spi_devices[] __initdata = {
+	{
+		.modalias = "tdo24m",
+		.max_speed_hz = 1000000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &em_x270_tdo24m_chip,
+		.platform_data = &em_x270_tdo24m_pdata,
+	},
+};
+
+static void __init em_x270_init_spi(void)
+{
+	pxa2xx_set_spi_info(1, &em_x270_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
+}
+#else
+static inline void em_x270_init_spi(void) {}
+#endif
+
 #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
 static void __init em_x270_init_ac97(void)
 {
@@ -481,23 +678,76 @@ static inline void em_x270_init_ac97(void) {}
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_matrix_keys[] = {
+static unsigned int em_x270_module_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
 	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
 	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
 };
 
-struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 3,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= em_x270_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+	.matrix_key_map		= em_x270_module_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
+static unsigned int em_x270_exeda_matrix_keys[] = {
+	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
+	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
+	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
+	KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
+
+	KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
+	KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
+	KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
+
+	KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
+	KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
+	KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
+	KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
+
+	KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
+	KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
+	KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
+	KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
+
+	KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
+	KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
+	KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
+
+	KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
+	KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
+	KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
+	KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
+
+	KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
+	KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
+	KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
+	KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
+
+	KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
+	KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
+	KEY(7, 4, 0), KEY(7, 5, 0),
+	KEY(7, 6, 0), KEY(7, 7, 0),
+};
+
+struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= em_x270_exeda_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_exeda_matrix_keys),
 };
 
 static void __init em_x270_init_keypad(void)
 {
-	pxa_set_keypad_info(&em_x270_keypad_info);
+	if (machine_is_em_x270())
+		pxa_set_keypad_info(&em_x270_module_keypad_info);
+	else
+		pxa_set_keypad_info(&em_x270_exeda_keypad_info);
 }
 #else
 static inline void em_x270_init_keypad(void) {}
@@ -535,19 +785,264 @@ static void __init em_x270_init_gpio_keys(void)
 static inline void em_x270_init_gpio_keys(void) {}
 #endif
 
-static void __init em_x270_init(void)
+/* Quick Capture Interface and sensor setup */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static struct regulator *em_x270_camera_ldo;
+
+static int em_x270_sensor_init(struct device *dev)
 {
+	int ret;
+
+	ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+	if (ret)
+		return ret;
+
+	gpio_direction_output(GPIO93_CAM_RESET, 0);
+
+	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
+	if (em_x270_camera_ldo == NULL) {
+		gpio_free(GPIO93_CAM_RESET);
+		return -ENODEV;
+	}
+
+	ret = regulator_enable(em_x270_camera_ldo);
+	if (ret) {
+		regulator_put(em_x270_camera_ldo);
+		gpio_free(GPIO93_CAM_RESET);
+		return ret;
+	}
+
+	gpio_set_value(GPIO93_CAM_RESET, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+	.init	= em_x270_sensor_init,
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 2600,
+};
+
+static int em_x270_sensor_power(struct device *dev, int on)
+{
+	int ret;
+	int is_on = regulator_is_enabled(em_x270_camera_ldo);
+
+	if (on == is_on)
+		return 0;
+
+	gpio_set_value(GPIO93_CAM_RESET, !on);
+
+	if (on)
+		ret = regulator_enable(em_x270_camera_ldo);
+	else
+		ret = regulator_disable(em_x270_camera_ldo);
+
+	if (ret)
+		return ret;
+
+	gpio_set_value(GPIO93_CAM_RESET, on);
+
+	return 0;
+}
+
+static struct soc_camera_link iclink = {
+	.bus_id	= 0,
+	.power = em_x270_sensor_power,
+};
+
+static struct i2c_board_info em_x270_i2c_cam_info[] = {
+	{
+		I2C_BOARD_INFO("mt9m111", 0x48),
+		.platform_data = &iclink,
+	},
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+	.fast_mode = 1,
+};
+
+static void  __init em_x270_init_camera(void)
+{
+	pxa_set_i2c_info(&em_x270_i2c_info);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
+	pxa_set_camera_info(&em_x270_camera_platform_data);
+}
+#else
+static inline void em_x270_init_camera(void) {}
+#endif
+
+/* DA9030 related initializations */
+#define REGULATOR_CONSUMER(_name, _dev, _supply)			       \
+	static struct regulator_consumer_supply _name##_consumers[] = {	\
+		{							\
+			.dev = _dev,					\
+			.supply = _supply,				\
+		},							\
+	}
+
+REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
+REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
+REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
+REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+
+#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
+	static struct regulator_init_data _ldo##_data = {		\
+		.constraints = {					\
+			.min_uV = _min_uV,				\
+			.max_uV = _max_uV,				\
+			.state_mem = {					\
+				.enabled = 0,				\
+			},						\
+			.valid_ops_mask = _ops_mask,			\
+		},							\
+		.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),	\
+		.consumer_supplies = _ldo##_consumers,			\
+	};
+
+REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo10, 2000000, 3200000,
+	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
+REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+
+struct led_info em_x270_led_info = {
+	.name = "em-x270:orange",
+	.default_trigger = "battery-charging-or-full",
+};
+
+struct power_supply_info em_x270_psy_info = {
+	.name = "LP555597P6H-FPS",
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.voltage_max_design = 4200000,
+	.voltage_min_design = 3000000,
+	.use_for_apm = 1,
+};
+
+static void em_x270_battery_low(void)
+{
+	apm_queue_event(APM_LOW_BATTERY);
+}
+
+static void em_x270_battery_critical(void)
+{
+	apm_queue_event(APM_CRITICAL_SUSPEND);
+}
+
+struct da9030_battery_info em_x270_batterty_info = {
+	.battery_info = &em_x270_psy_info,
+
+	.charge_milliamp = 1000,
+	.charge_millivolt = 4200,
+
+	.vbat_low = 3600,
+	.vbat_crit = 3400,
+	.vbat_charge_start = 4100,
+	.vbat_charge_stop = 4200,
+	.vbat_charge_restart = 4000,
+
+	.vcharge_min = 3200,
+	.vcharge_max = 5500,
+
+	.tbat_low = 197,
+	.tbat_high = 78,
+	.tbat_restart = 100,
+
+	.batmon_interval = 0,
+
+	.battery_low = em_x270_battery_low,
+	.battery_critical = em_x270_battery_critical,
+};
+
+#define DA9030_SUBDEV(_name, _id, _pdata)	\
+	{					\
+		.name = "da903x-" #_name,	\
+		.id = DA9030_ID_##_id,		\
+		.platform_data = _pdata,	\
+	}
+
+#define DA9030_LDO(num)	DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+	DA9030_LDO(3),
+	DA9030_LDO(5),
+	DA9030_LDO(10),
+	DA9030_LDO(12),
+	DA9030_LDO(19),
+
+	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
+	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
+	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
+};
+
+static struct da903x_platform_data em_x270_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
+	.subdevs = em_x270_da9030_subdevs,
+};
+
+static struct i2c_board_info em_x270_i2c_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_GPIO(0),
+	.platform_data = &em_x270_da9030_info,
+};
+
+static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init em_x270_init_da9030(void)
+{
+	pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
+	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
+}
+
+static void __init em_x270_module_init(void)
+{
+	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
+	mmc_cd = GPIO13_MMC_CD;
+	nand_rb = GPIO56_NAND_RB;
+	dm9000_flags = DM9000_PLATF_32BITONLY;
+}
+
+static void __init em_x270_exeda_init(void)
+{
+	pr_info("%s\n", __func__);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
+
+	mmc_cd = GPIO114_MMC_CD;
+	nand_rb = GPIO20_NAND_RB;
+	dm9000_flags = DM9000_PLATF_16BITONLY;
+}
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+	if (machine_is_em_x270())
+		em_x270_module_init();
+	else if (machine_is_exeda())
+		em_x270_exeda_init();
+	else
+		panic("Unsupported machine: %d\n", machine_arch_type);
+
+	em_x270_init_da9030();
 	em_x270_init_dm9000();
 	em_x270_init_rtc();
 	em_x270_init_nand();
+	em_x270_init_nor();
 	em_x270_init_lcd();
 	em_x270_init_mmc();
 	em_x270_init_ohci();
 	em_x270_init_keypad();
 	em_x270_init_gpio_keys();
 	em_x270_init_ac97();
+	em_x270_init_camera();
+	em_x270_init_spi();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
@@ -559,3 +1054,13 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
 MACHINE_END
+
+MACHINE_START(EXEDA, "Compulab eXeda")
+	.boot_params	= 0xa0000100,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= em_x270_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index dfce7d5b659..c60dadf847a 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,8 +20,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index df5f822f3b6..92ba16e1b6f 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -19,18 +19,16 @@
 #include <linux/input.h>
 
 #include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
 
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
 #include "devices.h"
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 0ccc91c92c4..3126a35aa00 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -26,8 +26,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/reset.h>
+#include <mach/gpio.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
@@ -127,3 +128,33 @@ void __init pxa_map_io(void)
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 	get_clk_frequency_khz(1);
 }
+
+/*
+ * Configure pins for GPIO or other functions
+ */
+int pxa_gpio_mode(int gpio_mode)
+{
+	unsigned long flags;
+	int gpio = gpio_mode & GPIO_MD_MASK_NR;
+	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
+	int gafr;
+
+	if (gpio > pxa_last_gpio)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	if (gpio_mode & GPIO_DFLT_LOW)
+		GPCR(gpio) = GPIO_bit(gpio);
+	else if (gpio_mode & GPIO_DFLT_HIGH)
+		GPSR(gpio) = GPIO_bit(gpio);
+	if (gpio_mode & GPIO_MD_MASK_DIR)
+		GPDR(gpio) |= GPIO_bit(gpio);
+	else
+		GPDR(gpio) &= ~GPIO_bit(gpio);
+	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
+	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
+	local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(pxa_gpio_mode);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index dc876a8e666..3465268ca71 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -9,20 +9,17 @@
  * published by the Free Software Foundation.
  */
 
-typedef int (*set_wake_t)(unsigned int, unsigned int);
-
 struct sys_timer;
 
 extern struct sys_timer pxa_timer;
-extern void __init pxa_init_irq(int irq_nr, set_wake_t fn);
-extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn);
+extern void __init pxa_init_irq(int irq_nr,
+				int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa_map_io(void);
 
 extern unsigned int get_clk_frequency_khz(int info);
-extern int pxa_last_gpio;
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
deleted file mode 100644
index 5fec1e479cb..00000000000
--- a/arch/arm/mach-pxa/gpio.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/gpio.c
- *
- *  Generic PXA GPIO handling
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <asm/gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-
-#include "generic.h"
-
-#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET	0x00
-#define GPDR_OFFSET	0x0C
-#define GPSR_OFFSET	0x18
-#define GPCR_OFFSET	0x24
-#define GRER_OFFSET	0x30
-#define GFER_OFFSET	0x3C
-#define GEDR_OFFSET	0x48
-
-struct pxa_gpio_chip {
-	struct gpio_chip chip;
-	void __iomem     *regbase;
-};
-
-int pxa_last_gpio;
-
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static int __gpio_is_inverted(unsigned gpio)
-{
-	return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-#define __gpio_is_inverted(gpio)	(0)
-#endif
-
-/*
- * Configure pins for GPIO or other functions
- */
-int pxa_gpio_mode(int gpio_mode)
-{
-	unsigned long flags;
-	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-	int gafr;
-
-	if (gpio > pxa_last_gpio)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	if (gpio_mode & GPIO_DFLT_LOW)
-		GPCR(gpio) = GPIO_bit(gpio);
-	else if (gpio_mode & GPIO_DFLT_HIGH)
-		GPSR(gpio) = GPIO_bit(gpio);
-	if (gpio_mode & GPIO_MD_MASK_DIR)
-		GPDR(gpio) |= GPIO_bit(gpio);
-	else
-		GPDR(gpio) &= ~GPIO_bit(gpio);
-	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-	local_irq_restore(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(pxa_gpio_mode);
-
-static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned long        flags;
-	u32                  mask = 1 << offset;
-	u32                  value;
-	struct pxa_gpio_chip *pxa;
-	void __iomem         *gpdr;
-
-	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-	gpdr = pxa->regbase + GPDR_OFFSET;
-	local_irq_save(flags);
-	value = __raw_readl(gpdr);
-	if (__gpio_is_inverted(chip->base + offset))
-		value |= mask;
-	else
-		value &= ~mask;
-	__raw_writel(value, gpdr);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static int pxa_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	unsigned long        flags;
-	u32                  mask = 1 << offset;
-	u32                  tmp;
-	struct pxa_gpio_chip *pxa;
-	void __iomem         *gpdr;
-
-	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-	__raw_writel(mask,
-			pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET));
-	gpdr = pxa->regbase + GPDR_OFFSET;
-	local_irq_save(flags);
-	tmp = __raw_readl(gpdr);
-	if (__gpio_is_inverted(chip->base + offset))
-		tmp &= ~mask;
-	else
-		tmp |= mask;
-	__raw_writel(tmp, gpdr);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-/*
- * Return GPIO level
- */
-static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	u32                  mask = 1 << offset;
-	struct pxa_gpio_chip *pxa;
-
-	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-	return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask;
-}
-
-/*
- * Set output GPIO level
- */
-static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	u32                  mask = 1 << offset;
-	struct pxa_gpio_chip *pxa;
-
-	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-
-	if (value)
-		__raw_writel(mask, pxa->regbase + GPSR_OFFSET);
-	else
-		__raw_writel(mask, pxa->regbase + GPCR_OFFSET);
-}
-
-#define GPIO_CHIP(_n)							\
-	[_n] = {							\
-		.regbase = GPIO##_n##_BASE,				\
-		.chip = {						\
-			.label		  = "gpio-" #_n,		\
-			.direction_input  = pxa_gpio_direction_input,	\
-			.direction_output = pxa_gpio_direction_output,	\
-			.get		  = pxa_gpio_get,		\
-			.set		  = pxa_gpio_set,		\
-			.base		  = (_n) * 32,			\
-			.ngpio		  = 32,				\
-		},							\
-	}
-
-static struct pxa_gpio_chip pxa_gpio_chip[] = {
-	GPIO_CHIP(0),
-	GPIO_CHIP(1),
-	GPIO_CHIP(2),
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-	GPIO_CHIP(3),
-#endif
-};
-
-/*
- * PXA GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-
-static unsigned long GPIO_IRQ_rising_edge[4];
-static unsigned long GPIO_IRQ_falling_edge[4];
-static unsigned long GPIO_IRQ_mask[4];
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static int __gpio_is_occupied(unsigned gpio)
-{
-	if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
-		int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
-		int dir = GPDR(gpio) & GPIO_bit(gpio);
-
-		if (__gpio_is_inverted(gpio))
-			return af != 1 || dir == 0;
-		else
-			return af != 0 || dir != 0;
-	}
-
-	return 0;
-}
-
-static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-	int gpio, idx;
-
-	gpio = IRQ_TO_GPIO(irq);
-	idx = gpio >> 5;
-
-	if (type == IRQ_TYPE_PROBE) {
-		/* Don't mess with enabled GPIOs using preconfigured edges or
-		 * GPIOs set to alternate function or to output during probe
-		 */
-		if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
-		    (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
-			return 0;
-
-		if (__gpio_is_occupied(gpio))
-			return 0;
-
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	if (__gpio_is_inverted(gpio))
-		GPDR(gpio) |= GPIO_bit(gpio);
-	else
-		GPDR(gpio) &= ~GPIO_bit(gpio);
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		__set_bit(gpio, GPIO_IRQ_rising_edge);
-	else
-		__clear_bit(gpio, GPIO_IRQ_rising_edge);
-
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		__set_bit(gpio, GPIO_IRQ_falling_edge);
-	else
-		__clear_bit(gpio, GPIO_IRQ_falling_edge);
-
-	GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
-	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
-
-	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
-		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
-		((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
-	return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged.  This is for GPIO 0 and 1.
- */
-
-static void pxa_ack_low_gpio(unsigned int irq)
-{
-	GEDR0 = (1 << (irq - IRQ_GPIO0));
-}
-
-static void pxa_mask_low_gpio(unsigned int irq)
-{
-	ICMR &= ~(1 << (irq - PXA_IRQ(0)));
-}
-
-static void pxa_unmask_low_gpio(unsigned int irq)
-{
-	ICMR |= 1 << (irq - PXA_IRQ(0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
-	.name		= "GPIO-l",
-	.ack		= pxa_ack_low_gpio,
-	.mask		= pxa_mask_low_gpio,
-	.unmask		= pxa_unmask_low_gpio,
-	.set_type	= pxa_gpio_irq_type,
-};
-
-/*
- * Demux handler for GPIO>=2 edge detect interrupts
- */
-
-#define GEDR_BITS	(sizeof(gedr) * BITS_PER_BYTE)
-
-static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int loop, bit, n;
-	unsigned long gedr[4];
-
-	do {
-		gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3;
-		gedr[1] = GEDR1 & GPIO_IRQ_mask[1];
-		gedr[2] = GEDR2 & GPIO_IRQ_mask[2];
-		gedr[3] = GEDR3 & GPIO_IRQ_mask[3];
-
-		GEDR0 = gedr[0]; GEDR1 = gedr[1];
-		GEDR2 = gedr[2]; GEDR3 = gedr[3];
-
-		loop = 0;
-		bit = find_first_bit(gedr, GEDR_BITS);
-		while (bit < GEDR_BITS) {
-			loop = 1;
-
-			n = PXA_GPIO_IRQ_BASE + bit;
-			generic_handle_irq(n);
-
-			bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
-		}
-	} while (loop);
-}
-
-static void pxa_ack_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	GEDR(gpio) = GPIO_bit(gpio);
-}
-
-static void pxa_mask_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	__clear_bit(gpio, GPIO_IRQ_mask);
-	GRER(gpio) &= ~GPIO_bit(gpio);
-	GFER(gpio) &= ~GPIO_bit(gpio);
-}
-
-static void pxa_unmask_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	int idx = gpio >> 5;
-	__set_bit(gpio, GPIO_IRQ_mask);
-	GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
-	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
-}
-
-static struct irq_chip pxa_muxed_gpio_chip = {
-	.name		= "GPIO",
-	.ack		= pxa_ack_muxed_gpio,
-	.mask		= pxa_mask_muxed_gpio,
-	.unmask		= pxa_unmask_muxed_gpio,
-	.set_type	= pxa_gpio_irq_type,
-};
-
-void __init pxa_init_gpio(int gpio_nr, set_wake_t fn)
-{
-	int irq, i, gpio;
-
-	pxa_last_gpio = gpio_nr - 1;
-
-	/* clear all GPIO edge detects */
-	for (i = 0; i < gpio_nr; i += 32) {
-		GFER(i) = 0;
-		GRER(i) = 0;
-		GEDR(i) = GEDR(i);
-	}
-
-	/* GPIO 0 and 1 must have their mask bit always set */
-	GPIO_IRQ_mask[0] = 3;
-
-	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
-		set_irq_chip(irq, &pxa_low_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) {
-		set_irq_chip(irq, &pxa_muxed_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* Install handler for GPIO>=2 edge detect interrupts */
-	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
-
-	pxa_low_gpio_chip.set_wake = fn;
-	pxa_muxed_gpio_chip.set_wake = fn;
-
-	/* add a GPIO chip for each register bank.
-	 * the last PXA25x register only contains 21 GPIOs
-	 */
-	for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) {
-		if (gpio + 32 > gpio_nr)
-			pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio;
-		gpiochip_add(&pxa_gpio_chip[i].chip);
-	}
-}
-
-#ifdef CONFIG_PM
-
-static unsigned long saved_gplr[4];
-static unsigned long saved_gpdr[4];
-static unsigned long saved_grer[4];
-static unsigned long saved_gfer[4];
-
-static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
-{
-	int i, gpio;
-
-	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
-		saved_gplr[i] = GPLR(gpio);
-		saved_gpdr[i] = GPDR(gpio);
-		saved_grer[i] = GRER(gpio);
-		saved_gfer[i] = GFER(gpio);
-
-		/* Clear GPIO transition detect bits */
-		GEDR(gpio) = GEDR(gpio);
-	}
-	return 0;
-}
-
-static int pxa_gpio_resume(struct sys_device *dev)
-{
-	int i, gpio;
-
-	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
-		/* restore level with set/clear */
-		GPSR(gpio) = saved_gplr[i];
-		GPCR(gpio) = ~saved_gplr[i];
-
-		GRER(gpio) = saved_grer[i];
-		GFER(gpio) = saved_gfer[i];
-		GPDR(gpio) = saved_gpdr[i];
-	}
-	return 0;
-}
-#else
-#define pxa_gpio_suspend	NULL
-#define pxa_gpio_resume		NULL
-#endif
-
-struct sysdev_class pxa_gpio_sysclass = {
-	.name		= "gpio",
-	.suspend	= pxa_gpio_suspend,
-	.resume		= pxa_gpio_resume,
-};
-
-static int __init pxa_gpio_init(void)
-{
-	return sysdev_class_register(&pxa_gpio_sysclass);
-}
-
-core_initcall(pxa_gpio_init);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index e296ce11658..ca9912ea78d 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -38,14 +38,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+
+#include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/gumstix.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-
 #include "generic.h"
 
 static struct resource flash_resource = {
@@ -191,6 +189,11 @@ int __attribute__((weak)) am200_init(void)
 	return 0;
 }
 
+int __attribute__((weak)) am300_init(void)
+{
+	return 0;
+}
+
 static void __init carrier_board_init(void)
 {
 	/*
@@ -198,6 +201,7 @@ static void __init carrier_board_init(void)
 	 * they cannot be detected programatically
 	 */
 	am200_init();
+	am300_init();
 }
 
 static void __init gumstix_init(void)
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index da6e4422c0f..6a197fb5c09 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -24,14 +24,15 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+
+#include <mach/pxa25x.h>
 #include <mach/h5000.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
 #include <mach/udc.h>
+
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
new file mode 100644
index 00000000000..cea99fe65b9
--- /dev/null
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -0,0 +1,166 @@
+/*
+ * linux/arch/arm/mach-pxa/himalaya.c
+ *
+ * Hardware definitions for the HTC Himalaya
+ *
+ * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
+ *
+ * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include "generic.h"
+
+/* ---------------------- Himalaya LCD definitions -------------------- */
+
+static struct w100_gen_regs himalaya_lcd_regs = {
+	.lcd_format =        0x00000003,
+	.lcdd_cntl1 =        0x00000000,
+	.lcdd_cntl2 =        0x0003ffff,
+	.genlcd_cntl1 =      0x00fff003,
+	.genlcd_cntl2 =      0x00000003,
+	.genlcd_cntl3 =      0x000102aa,
+};
+
+static struct w100_mode himalaya4_lcd_mode = {
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 0,
+	.right_margin 	= 31,
+	.upper_margin 	= 15,
+	.lower_margin 	= 0,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls	= 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0x81700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 80,
+	.pixclk_divider = 15,
+	.pixclk_divider_rotated = 15,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_mode himalaya6_lcd_mode = {
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 9,
+	.right_margin 	= 8,
+	.upper_margin 	= 5,
+	.lower_margin 	= 4,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls	= 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0xa1700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 95,
+	.pixclk_divider = 0xb,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs himalaya_w100_gpio_info = {
+	.init_data1 = 0xffff0000,	/* GPIO_DATA  */
+	.gpio_dir1  = 0x00000000,	/* GPIO_CNTL1 */
+	.gpio_oe1   = 0x003c0000,	/* GPIO_CNTL2 */
+	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
+	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
+	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info himalaya_fb_info = {
+	.num_modes  = 1,
+	.regs       = &himalaya_lcd_regs,
+	.gpio       = &himalaya_w100_gpio_info,
+	.xtal_freq = 16000000,
+};
+
+static struct resource himalaya_fb_resources[] = {
+	[0] = {
+		.start	= 0x08000000,
+		.end	= 0x08ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device himalaya_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &himalaya_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(himalaya_fb_resources),
+	.resource       = himalaya_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&himalaya_fb_device,
+};
+
+static void __init himalaya_lcd_init(void)
+{
+	int himalaya_boardid;
+
+	himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
+	printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
+		himalaya_boardid);
+
+	switch (himalaya_boardid) {
+	case 0x4:
+		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+	break;
+	case 0x6:
+		himalaya_fb_info.modelist = &himalaya6_lcd_mode;
+	break;
+	default:
+		printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
+			himalaya_boardid);
+		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+	}
+}
+
+static void __init himalaya_init(void)
+{
+	himalaya_lcd_init();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+MACHINE_START(HIMALAYA, "HTC Himalaya")
+	.phys_io = 0x40000000,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params = 0xa0000100,
+	.map_io = pxa_map_io,
+	.init_irq = pxa25x_init_irq,
+	.init_machine = himalaya_init,
+	.timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 013b15baa03..b6243b59d9b 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -31,8 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/idp.h>
 #include <mach/pxafb.h>
 #include <mach/bitfield.h>
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 364c5e27133..2121309b247 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -28,11 +28,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <mach/pxa27x.h>
 #include <mach/i2c.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/regs-ssp.h>
 #include <mach/udc.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 2ae373fb567..3f2a01d6a03 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -1,19 +1,31 @@
 #ifndef _COLIBRI_H_
 #define _COLIBRI_H_
+/*
+ * common settings for all modules
+ */
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
+#else
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern void colibri_pxa3xx_init_lcd(int bl_pin);
+#else
+static inline void colibri_pxa3xx_init_lcd(int) {}
+#endif
 
 /* physical memory regions */
-#define COLIBRI_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define COLIBRI_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-/* virtual memory regions */
-#define COLIBRI_DISK_VIRT	0xF0000000	/* Disk On Chip region */
+/* definitions for Colibri PXA270 */
 
-/* size of flash */
-#define COLIBRI_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		114
-#define COLIBRI_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+#define COLIBRI_PXA270_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define COLIBRI_PXA270_ETH_PHYS		(PXA_CS2_PHYS)  /* Ethernet */
+#define COLIBRI_PXA270_ETH_IRQ_GPIO	114
+#define COLIBRI_PXA270_ETH_IRQ		\
+	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
 
 #endif /* _COLIBRI_H_ */
+
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
new file mode 100644
index 00000000000..747ab1a71f2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -0,0 +1,26 @@
+/*
+ *  Support for Cogent CSB726
+ *
+ *  Copyright (c) 2008 Dmitry Baryshkov
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef CSB726_H
+#define CSB726_H
+
+#define CSB726_GPIO_IRQ_LAN	52
+#define CSB726_GPIO_IRQ_SM501	53
+#define CSB726_GPIO_MMC_DETECT	100
+#define CSB726_GPIO_MMC_RO	101
+
+#define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
+#define CSB726_FLASH_uMON	(8 * 1024 * 1024)
+
+#define CSB726_IRQ_LAN		gpio_to_irq(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501	gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 7804637a6df..5bd55894a48 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -12,35 +12,10 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
+#include <mach/hardware.h>
 
-void pxa_free_dma (int dma_ch);
+/* DMA Controller Registers Definitions */
+#define DMAC_REGS_VIRT	io_p2v(0x40000000)
 
+#include <plat/dma.h>
 #endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 2c538d8c362..b024a8b3743 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,42 +24,118 @@
 #ifndef __ASM_ARCH_PXA_GPIO_H
 #define __ASM_ARCH_PXA_GPIO_H
 
-#include <mach/pxa-regs.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
 #include <mach/hardware.h>
-
 #include <asm-generic/gpio.h>
 
+#define GPIO_REGS_VIRT	io_p2v(0x40E00000)
+
+#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0		GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1		GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2		GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3		GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0		GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1		GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2		GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3		GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0		GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1		GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2		GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3		GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0		GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1		GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2		GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3		GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0		GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1		GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2		GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3		GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0		GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1		GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2		GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3		GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0		GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1		GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2		GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3		GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L		GPIO_REG(0x0054)
+#define GAFR0_U		GPIO_REG(0x0058)
+#define GAFR1_L		GPIO_REG(0x005C)
+#define GAFR1_U		GPIO_REG(0x0060)
+#define GAFR2_L		GPIO_REG(0x0064)
+#define GAFR2_U		GPIO_REG(0x0068)
+#define GAFR3_L		GPIO_REG(0x006C)
+#define GAFR3_U		GPIO_REG(0x0070)
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#define GPLR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x)		GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
 
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
- */
 #define NR_BUILTIN_GPIO 128
 
-static inline int gpio_get_value(unsigned gpio)
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
+#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
 {
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
-		return GPLR(gpio) & GPIO_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
+	return cpu_is_pxa25x() && gpio > 85;
 }
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
 
-static inline void gpio_set_value(unsigned gpio, int value)
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
 {
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
-		if (value)
-			GPSR(gpio) = GPIO_bit(gpio);
+	if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+		int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+		int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+		if (__gpio_is_inverted(gpio))
+			return af != 1 || dir == 0;
 		else
-			GPCR(gpio) = GPIO_bit(gpio);
-	} else {
-		__gpio_set_value(gpio, value);
-	}
+			return af != 0 || dir != 0;
+	} else
+		return GPDR(gpio) & GPIO_bit(gpio);
 }
 
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
-#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
-
-
+#include <plat/gpio.h>
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 099f54a41de..06abd416060 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -97,4 +97,5 @@ has detected a cable insertion; driven low otherwise. */
 
 /* for expansion boards that can't be programatically detected */
 extern int am200_init(void);
+extern int am300_init(void);
 
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 4cb24154a5a..751b74811d0 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -25,7 +25,6 @@
 
 /* FPGA register virtual addresses */
 #define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
 #define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
 #define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
 #define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 38d68d99f58..82a399f3f9f 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -69,7 +69,7 @@
 #define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
 #define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
 #define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
+#define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
 
 /*
  * CPLD EGPIOs
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index a72869b73ee..b13dc0269a6 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -1,7 +1,6 @@
 #ifndef __ASM_ARCH_MFP_PXA25X_H
 #define __ASM_ARCH_MFP_PXA25X_H
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa2xx.h>
 
 /* GPIO */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index da4f85a4f99..6543c05f47e 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -8,7 +8,6 @@
  * specific controller, and this should work in most cases.
  */
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa2xx.h>
 
 /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index 3e9211591e2..658b28ed129 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_MFP_PXA2XX_H
 #define __ASM_ARCH_MFP_PXA2XX_H
 
-#include <mach/mfp.h>
+#include <plat/mfp.h>
 
 /*
  * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index bc1fb33a6e7..ae8441192ef 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -15,7 +15,6 @@
 #ifndef __ASM_ARCH_MFP_PXA300_H
 #define __ASM_ARCH_MFP_PXA300_H
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
@@ -41,6 +40,7 @@
 #endif
 
 /* Chip Select */
+#define GPIO1_nCS2		MFP_CFG(GPIO1,	AF1)
 #define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
 
 /* AC97 */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 67f8385ea54..07897e61d05 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -15,7 +15,6 @@
 #ifndef __ASM_ARCH_MFP_PXA320_H
 #define __ASM_ARCH_MFP_PXA320_H
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
@@ -38,6 +37,7 @@
 #define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
 
 /* Chip Select */
+#define GPIO3_nCS2		MFP_CFG(GPIO3, AF1)
 #define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
 
 /* AC97 */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
index 1f6b35c015d..d375195d982 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
@@ -1,68 +1,9 @@
 #ifndef __ASM_ARCH_MFP_PXA3XX_H
 #define __ASM_ARCH_MFP_PXA3XX_H
 
-#define MFPR_BASE	(0x40e10000)
-#define MFPR_SIZE	(PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL		(0x1 << 15)
-#define MFPR_PULLUP_EN		(0x1 << 14)
-#define MFPR_PULLDOWN_EN	(0x1 << 13)
-#define MFPR_SLEEP_SEL		(0x1 << 9)
-#define MFPR_SLEEP_OE_N		(0x1 << 7)
-#define MFPR_EDGE_CLEAR		(0x1 << 6)
-#define MFPR_EDGE_FALL_EN	(0x1 << 5)
-#define MFPR_EDGE_RISE_EN	(0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x)	((x) << 8)
-#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+#include <plat/mfp.h>
 
-#define MFPR_EDGE_NONE		(0)
-#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
- *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
- *
- * Input            0          X(0)        X(0)        X(0)       0
- * Drive 0          0          0           0           X(1)       0
- * Drive 1          0          1           X(1)        0	  0
- * Pull hi (1)      1          X(1)        1           0	  0
- * Pull lo (0)      1          X(0)        0           1	  0
- * Z (float)        1          X(0)        0           0	  0
- */
-#define MFPR_LPM_INPUT		(0)
-#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK		(0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior,  the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition       pull_sel  pullup_en  pulldown_en
- * MFPR_PULL_NONE       0         0        0
- * MFPR_PULL_LOW        1         0        1
- * MFPR_PULL_HIGH       1         1        0
- * MFPR_PULL_BOTH       1         1        1
- */
-#define MFPR_PULL_NONE		(0)
-#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_BASE	(0x40e10000)
 
 /* PXA3xx common MFP configurations - processor specific ones defined
  * in mfp-pxa300.h and mfp-pxa320.h
@@ -197,56 +138,21 @@
 #define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
 #define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
 
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by pxa3xx_mfp_init_addr()
- *
- * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
- * structure, which represents a range of MFP pins from "start" to
- * "end", with the offset begining at "offset", to define a single
- * pin, let "end" = -1
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR()   to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct pxa3xx_mfp_addr_map {
-	unsigned int	start;
-	unsigned int	end;
-	unsigned long	offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
-	{ MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
-	{ MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
-
-/*
- * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
- * to the MFPR register
- */
-unsigned long pxa3xx_mfp_read(int mfp);
-void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
-
-/*
- * pxa3xx_mfp_config - configure the MFPR registers
- *
- * used by board specific initialization code
- */
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
-
-/*
- * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
- * index and MFPR register offset
- *
- * used by processor specific code
+/* NOTE: usage of these two functions is not recommended,
+ * use pxa3xx_mfp_config() instead.
  */
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
-void __init pxa3xx_init_mfp(void);
+static inline unsigned long pxa3xx_mfp_read(int mfp)
+{
+	return mfp_read(mfp);
+}
+
+static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+	mfp_write(mfp, val);
+}
+
+static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
+{
+	mfp_config(mfp_cfg, num);
+}
 #endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index fa73f56a137..0d119d3b922 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_MFP_PXA9xx_H
 #define __ASM_ARCH_MFP_PXA9xx_H
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index cfca8155be7..297387ec361 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,8 +15,8 @@
 #ifndef __ARCH_PXA_MTD_XIP_H__
 #define __ARCH_PXA_MTD_XIP_H__
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
+#include <mach/regs-intc.h>
 
 #define xip_irqpending()	(ICIP & ICMR)
 
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
new file mode 100644
index 00000000000..7c295a48d78
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -0,0 +1,109 @@
+/*
+ * GPIOs and interrupts for Palm LifeDrive Handheld Computer
+ *
+ * Authors:	Alex Osborne <ato@meshy.org>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMLD_H_
+#define _INCLUDE_PALMLD_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMLD_GPIO_RESET	1
+#define GPIO_NR_PALMLD_POWER_DETECT	4
+#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N	10
+#define GPIO_NR_PALMLD_POWER_SWITCH	12
+#define GPIO_NR_PALMLD_EARPHONE_DETECT 	13
+#define GPIO_NR_PALMLD_LOCK_SWITCH	15
+
+/* SD/MMC */
+#define GPIO_NR_PALMLD_SD_DETECT_N	14
+#define GPIO_NR_PALMLD_SD_POWER		114
+#define GPIO_NR_PALMLD_SD_READONLY	116
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMLD_WM9712_IRQ	27
+
+/* IRDA */
+#define GPIO_NR_PALMLD_IR_DISABLE	108
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMLD_BL_POWER		19
+#define GPIO_NR_PALMLD_LCD_POWER	96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMLD_BORDER_SWITCH	21
+#define GPIO_NR_PALMLD_BORDER_SELECT	22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMLD_BT_POWER		17
+#define GPIO_NR_PALMLD_BT_RESET		83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMLD_PCMCIA_READY	38
+#define GPIO_NR_PALMLD_PCMCIA_POWER	36
+#define GPIO_NR_PALMLD_PCMCIA_RESET	81
+
+/* LEDs */
+#define GPIO_NR_PALMLD_LED_GREEN	52
+#define GPIO_NR_PALMLD_LED_AMBER	94
+
+/* IDE */
+#define GPIO_NR_PALMLD_IDE_IRQ		95
+#define GPIO_NR_PALMLD_IDE_RESET	98
+#define GPIO_NR_PALMLD_IDE_PWEN		115
+
+/* USB */
+#define GPIO_NR_PALMLD_USB_DETECT_N	3
+#define GPIO_NR_PALMLD_USB_READY	86
+#define GPIO_NR_PALMLD_USB_RESET	88
+#define GPIO_NR_PALMLD_USB_INT		106
+#define GPIO_NR_PALMLD_USB_POWER	118
+/* 20, 53 and 86 are usb related too */
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMLD_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ		IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+
+
+/** HERE ARE INIT VALUES **/
+
+/* IO mappings */
+#define PALMLD_USB_PHYS		PXA_CS2_PHYS
+#define PALMLD_USB_VIRT		0xf0000000
+#define PALMLD_USB_SIZE		0x00100000
+
+#define PALMLD_IDE_PHYS		0x20000000
+#define PALMLD_IDE_VIRT		0xf1000000
+#define PALMLD_IDE_SIZE		0x00100000
+
+#define PALMLD_PHYS_IO_START	0x40000000
+
+/* BATTERY */
+#define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
+#define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
+#define PALMLD_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMLD_MAX_LIFE_MINS		240	/* on-life in minutes */
+
+#define PALMLD_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMLD_MAX_INTENSITY		0xFE
+#define PALMLD_DEFAULT_INTENSITY	0x7E
+#define PALMLD_LIMIT_MASK		0x7F
+#define PALMLD_PRESCALER		0x3F
+#define PALMLD_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
new file mode 100644
index 00000000000..94db2881f04
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -0,0 +1,84 @@
+/*
+ * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
+ *
+ * Authors:	Ales Snuparek <snuparek@atlas.cz>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *		Justin Kendrick <twilightsentry@gmail.com>
+ *		RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMT5_H_
+#define _INCLUDE_PALMT5_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMT5_GPIO_RESET		1
+
+#define GPIO_NR_PALMT5_POWER_DETECT		90
+#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N		10
+#define GPIO_NR_PALMT5_EARPHONE_DETECT		107
+
+/* SD/MMC */
+#define GPIO_NR_PALMT5_SD_DETECT_N		14
+#define GPIO_NR_PALMT5_SD_POWER			114
+#define GPIO_NR_PALMT5_SD_READONLY		115
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMT5_WM9712_IRQ		27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMT5_IR_DISABLE		40
+
+/* USB */
+#define GPIO_NR_PALMT5_USB_DETECT_N		15
+#define GPIO_NR_PALMT5_USB_POWER		95
+#define GPIO_NR_PALMT5_USB_PULLUP		93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMT5_BL_POWER			84
+#define GPIO_NR_PALMT5_LCD_POWER		96
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMT5_BT_POWER			17
+#define GPIO_NR_PALMT5_BT_RESET			83
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMT5_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses  */
+#define PALMT5_PHYS_RAM_START	0xa0000000
+#define PALMT5_PHYS_IO_START	0x40000000
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME		21
+
+/* BATTERY */
+#define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMT5_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMT5_MAX_LIFE_MINS		360    /* on-life in minutes */
+
+#define PALMT5_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMT5_MAX_INTENSITY		0xFE
+#define PALMT5_DEFAULT_INTENSITY	0x7E
+#define PALMT5_LIMIT_MASK		0x7F
+#define PALMT5_PRESCALER		0x3F
+#define PALMT5_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 83342469aca..a6eeef8a075 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,3 +27,13 @@ extern void pxa27x_cpu_suspend(unsigned int);
 extern void pxa_cpu_resume(void);
 
 extern int pxa_pm_enter(suspend_state_t state);
+
+/* NOTE: this is for PM debugging on Lubbock,  it's really a big
+ * ugly, but let's keep the crap minimum here, instead of direct
+ * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
+ */
+#ifdef CONFIG_ARCH_LUBBOCK
+extern void lubbock_set_hexled(uint32_t value);
+#else
+#define lubbock_set_hexled(x)
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
deleted file mode 100644
index 31d615aa772..00000000000
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxa-regs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS	0x00000000
-#define PXA_CS1_PHYS	0x04000000
-#define PXA_CS2_PHYS	0x08000000
-#define PXA_CS3_PHYS	0x0C000000
-#define PXA_CS4_PHYS	0x10000000
-#define PXA_CS5_PHYS	0x14000000
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
-#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
-#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
-#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
-#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
-
-#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
-#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
-#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
-
-#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
-#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
-#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
-
-#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
-                	(0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
-#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
-                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
-                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
-#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
-#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
-#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
-
-#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
-#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
-#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
-#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
-
-
-
-/*
- * DMA Controller
- */
-#define DCSR(x)		__REG2(0x40000000, (x) << 2)
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-#endif
-
-#define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
-#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
-
-#define DRCMR(n)	(*(((n) < 64) ? \
-			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
-			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR(x)	__REG2(0x40000200, (x) << 4)
-#define DSADR(x)	__REG2(0x40000204, (x) << 4)
-#define DTADR(x)	__REG2(0x40000208, (x) << 4)
-#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		__REG(0x40900000)  /* RTC Count Register */
-#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
-#define RTSR		__REG(0x40900008)  /* RTC Status Register */
-#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
-#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
-#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0		__REG(0x40A00000)  /* */
-#define OSMR1		__REG(0x40A00004)  /* */
-#define OSMR2		__REG(0x40A00008)  /* */
-#define OSMR3		__REG(0x40A0000C)  /* */
-#define OSMR4		__REG(0x40A00080)  /* */
-#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
-#define OMCR4		__REG(0x40A000C0)  /* */
-#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
-#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
-#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
-#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
-#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
-#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
-
-#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
-
-#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
-#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
-#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
-#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
-#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
-#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
-#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
-#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
-#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
-
-#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-
-/*
- * General Purpose I/O
- */
-
-#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
-
-#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
-
-#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
-
-#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
-
-#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-
-#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-
-#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
-
-#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
-#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
-
-#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* More handy macros.  The argument is a literal GPIO number. */
-
-#define GPIO_bit(x)	(1 << ((x) & 0x1f))
-
-#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
-			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h
new file mode 100644
index 00000000000..508c3ba1f4d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA25x_H
+#define __MACH_PXA25x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
new file mode 100644
index 00000000000..6876e16c297
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -0,0 +1,19 @@
+#ifndef __MACH_PXA27x_H
+#define __MACH_PXA27x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+
+#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
+#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
+#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
+#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
+#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index d83393e2527..1209c44aa6f 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -3,6 +3,8 @@
 
 #warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
 
+#include <mach/gpio.h>
+
 /* GPIO alternate function assignments */
 
 #define GPIO1_RST		1	/* reset */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 77102d695cc..4fcddd9cab7 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -14,6 +14,19 @@
 #ifndef __PXA2XX_REGS_H
 #define __PXA2XX_REGS_H
 
+#include <mach/hardware.h>
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS	0x00000000
+#define PXA_CS1_PHYS	0x04000000
+#define PXA_CS2_PHYS	0x08000000
+#define PXA_CS3_PHYS	0x0C000000
+#define PXA_CS4_PHYS	0x10000000
+#define PXA_CS5_PHYS	0x14000000
+
 /*
  * Memory controller
  */
@@ -69,24 +82,6 @@
 #define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
 #define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
 
-
-#ifdef CONFIG_PXA27x
-
-#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
-#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
-#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
-#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
-#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
-
-#endif
-
-
 /*
  * Power Manager
  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h
new file mode 100644
index 00000000000..2f33076c9e4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa300.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA300_H
+#define __MACH_PXA300_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#endif /* __MACH_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h
new file mode 100644
index 00000000000..cab78e90327
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa320.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_PXA320_H
+#define __MACH_PXA320_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#endif /* __MACH_PXA320_H */
+
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index bcf3fb2c4b3..7d1a059b3d4 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -13,6 +13,17 @@
 #ifndef __ASM_ARCH_PXA3XX_REGS_H
 #define __ASM_ARCH_PXA3XX_REGS_H
 
+#include <mach/hardware.h>
+
+/*
+ * Static Chip Selects
+ */
+
+#define PXA300_CS0_PHYS		(0x00000000)	/* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS		(0x30000000)	/* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS		(0x10000000)
+#define PXA3xx_CS3_PHYS		(0x14000000)
+
 /*
  * Oscillator Configuration Register (OSCC)
  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h
new file mode 100644
index 00000000000..d45f76a9b54
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa930.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA930_H
+#define __MACH_PXA930_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
new file mode 100644
index 00000000000..ad23e74b762
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_INTC_H
+#define __ASM_MACH_REGS_INTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+#endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h
new file mode 100644
index 00000000000..a3e5f86ef67
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ost.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_MACH_REGS_OST_H
+#define __ASM_MACH_REGS_OST_H
+
+#include <mach/hardware.h>
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0		__REG(0x40A00000)  /* */
+#define OSMR1		__REG(0x40A00004)  /* */
+#define OSMR2		__REG(0x40A00008)  /* */
+#define OSMR3		__REG(0x40A0000C)  /* */
+#define OSMR4		__REG(0x40A00080)  /* */
+#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		__REG(0x40A000C0)  /* */
+#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+#endif /* __ASM_MACH_REGS_OST_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..f0e4a589bbe
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-rtc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		__REG(0x40900000)  /* RTC Count Register */
+#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR		__REG(0x40900008)  /* RTC Status Register */
+#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
index cf31986f6f0..8152be68388 100644
--- a/arch/arm/mach-pxa/include/mach/regs-ssp.h
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -37,7 +37,6 @@
 #if defined(CONFIG_PXA25x)
 #define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-
 #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index 0f381e69299..d1fce8b6d10 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -13,7 +13,6 @@
 #include <asm/proc-fns.h>
 #include "hardware.h"
 #include "pxa2xx-regs.h"
-#include "pxa-regs.h"
 
 static inline void arch_idle(void)
 {
@@ -21,4 +20,4 @@ static inline void arch_idle(void)
 }
 
 
-void arch_reset(char mode);
+void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index f4b029c0395..5706cea95d1 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -35,7 +35,8 @@ static inline void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
-	if (machine_is_littleton() || machine_is_intelmote2())
+	if (machine_is_littleton() || machine_is_intelmote2()
+			|| machine_is_csb726())
 		UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fa69c3a6a38..f6e0300e4f6 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -20,7 +20,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
+#include <mach/regs-intc.h>
 
 #include "generic.h"
 
@@ -51,6 +52,72 @@ static struct irq_chip pxa_internal_irq_chip = {
 	.unmask		= pxa_unmask_irq,
 };
 
+/*
+ * GPIO IRQs for GPIO 0 and 1
+ */
+static int pxa_set_low_gpio_type(unsigned int irq, unsigned int type)
+{
+	int gpio = irq - IRQ_GPIO0;
+
+	if (__gpio_is_occupied(gpio)) {
+		pr_err("%s failed: GPIO is configured\n", __func__);
+		return -EINVAL;
+	}
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		GRER0 |= GPIO_bit(gpio);
+	else
+		GRER0 &= ~GPIO_bit(gpio);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		GFER0 |= GPIO_bit(gpio);
+	else
+		GFER0 &= ~GPIO_bit(gpio);
+
+	return 0;
+}
+
+static void pxa_ack_low_gpio(unsigned int irq)
+{
+	GEDR0 = (1 << (irq - IRQ_GPIO0));
+}
+
+static void pxa_mask_low_gpio(unsigned int irq)
+{
+	ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+}
+
+static void pxa_unmask_low_gpio(unsigned int irq)
+{
+	ICMR |= 1 << (irq - PXA_IRQ(0));
+}
+
+static struct irq_chip pxa_low_gpio_chip = {
+	.name		= "GPIO-l",
+	.ack		= pxa_ack_low_gpio,
+	.mask		= pxa_mask_low_gpio,
+	.unmask		= pxa_unmask_low_gpio,
+	.set_type	= pxa_set_low_gpio_type,
+};
+
+static void __init pxa_init_low_gpio_irq(set_wake_t fn)
+{
+	int irq;
+
+	/* clear edge detection on GPIO 0 and 1 */
+	GFER0 &= ~0x3;
+	GRER0 &= ~0x3;
+	GEDR0 = 0x3;
+
+	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
+		set_irq_chip(irq, &pxa_low_gpio_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	pxa_low_gpio_chip.set_wake = fn;
+}
+
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
 	int irq;
@@ -72,6 +139,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 	}
 
 	pxa_internal_irq_chip.set_wake = fn;
+	pxa_init_low_gpio_irq(fn);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 18b20d46941..8b9c17142d5 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -18,7 +18,7 @@
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
 #include <mach/idp.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index 1a258029c33..e26d5efe196 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -16,7 +16,7 @@
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
 #include <mach/lubbock.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 95e06b84963..db4af5eee8b 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -16,7 +16,7 @@
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/mainstone.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 31da7f3c06f..e13f6a81c22 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -39,8 +39,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
 #include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index de3f67daaac..d64395f26a3 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -38,9 +38,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
+#include <mach/gpio.h>
 #include <mach/lpd270.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index bff704354c1..f04c8333dff 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -41,15 +41,15 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
+#include <mach/gpio.h>
 #include <mach/audio.h>
 #include <mach/lubbock.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
+#include <mach/pm.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -113,8 +113,14 @@ static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
+#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
 #define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
 
+void lubbock_set_hexled(uint32_t value)
+{
+	LUB_HEXLED = value;
+}
+
 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
 {
 	unsigned long flags;
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 21b821e1a60..d46b36746be 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,14 +25,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
 #include <mach/magician.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
 #include <mach/pxafb.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
@@ -66,6 +66,11 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO31_I2S_SYNC,
 	GPIO113_I2S_SYSCLK,
 
+	/* SSP 1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+
 	/* SSP 2 */
 	GPIO19_SSP2_SCLK,
 	GPIO14_SSP2_SFRM,
@@ -148,22 +153,31 @@ static struct pxaficp_platform_data magician_ficp_info = {
  * GPIO Keys
  */
 
+#define INIT_KEY(_code, _gpio, _desc)	\
+	{				\
+		.code   = KEY_##_code,	\
+		.gpio   = _gpio,	\
+		.desc   = _desc,	\
+		.type   = EV_KEY,	\
+		.wakeup = 1,		\
+	}
+
 static struct gpio_keys_button magician_button_table[] = {
-	{KEY_POWER,      GPIO0_MAGICIAN_KEY_POWER,      0, "Power button"},
-	{KEY_ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    0, "Hangup button"},
-	{KEY_F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  0, "Contacts button"},
-	{KEY_CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  0, "Calendar button"},
-	{KEY_CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    0, "Camera button"},
-	{KEY_UP,         GPIO93_MAGICIAN_KEY_UP,        0, "Up button"},
-	{KEY_DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      0, "Down button"},
-	{KEY_LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      0, "Left button"},
-	{KEY_RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     0, "Right button"},
-	{KEY_KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     0, "Action button"},
-	{KEY_RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    0, "Record button"},
-	{KEY_VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   0, "Volume up"},
-	{KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"},
-	{KEY_PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    0, "Phone button"},
-	{KEY_PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  0, "Headset button"},
+	INIT_KEY(POWER,      GPIO0_MAGICIAN_KEY_POWER,      "Power button"),
+	INIT_KEY(ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    "Hangup button"),
+	INIT_KEY(F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  "Contacts button"),
+	INIT_KEY(CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  "Calendar button"),
+	INIT_KEY(CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    "Camera button"),
+	INIT_KEY(UP,         GPIO93_MAGICIAN_KEY_UP,        "Up button"),
+	INIT_KEY(DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      "Down button"),
+	INIT_KEY(LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      "Left button"),
+	INIT_KEY(RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     "Right button"),
+	INIT_KEY(KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     "Action button"),
+	INIT_KEY(RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    "Record button"),
+	INIT_KEY(VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   "Volume up"),
+	INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
+	INIT_KEY(PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    "Phone button"),
+	INIT_KEY(PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  "Headset button"),
 };
 
 static struct gpio_keys_platform_data gpio_keys_data = {
@@ -189,7 +203,7 @@ static struct platform_device gpio_keys = {
 static struct resource egpio_resources[] = {
 	[0] = {
 		.start = PXA_CS3_PHYS,
-		.end   = PXA_CS3_PHYS + 0x20,
+		.end   = PXA_CS3_PHYS + 0x20 - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -420,7 +434,7 @@ static struct gpio_led gpio_leds[] = {
 	},
 	{
 		.name = "magician::phone_bl",
-		.default_trigger = "none",
+		.default_trigger = "backlight",
 		.gpio = GPIO103_MAGICIAN_LED_KP,
 	},
 };
@@ -468,8 +482,6 @@ static struct pasic3_led pasic3_leds[] = {
 	},
 };
 
-static struct platform_device pasic3;
-
 static struct pasic3_leds_machinfo pasic3_leds_info = {
 	.num_leds   = ARRAY_SIZE(pasic3_leds),
 	.power_gpio = EGPIO_MAGICIAN_LED_POWER,
@@ -511,6 +523,31 @@ static struct platform_device pasic3 = {
 };
 
 /*
+ * USB "Transceiver"
+ */
+
+static struct resource gpio_vbus_resource = {
+	.flags = IORESOURCE_IRQ,
+	.start = IRQ_MAGICIAN_VBUS,
+	.end   = IRQ_MAGICIAN_VBUS,
+};
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+	.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+	.gpio_vbus   = EGPIO_MAGICIAN_CABLE_STATE_USB,
+};
+
+static struct platform_device gpio_vbus = {
+	.name          = "gpio-vbus",
+	.id            = -1,
+	.num_resources = 1,
+	.resource      = &gpio_vbus_resource,
+	.dev = {
+		.platform_data = &gpio_vbus_info,
+	},
+};
+
+/*
  * External power
  */
 
@@ -586,15 +623,17 @@ static struct pda_power_pdata power_supply_info = {
 static struct resource power_supply_resources[] = {
 	[0] = {
 		.name  = "ac",
-		.flags = IORESOURCE_IRQ,
-		.start = IRQ_MAGICIAN_AC,
-		.end   = IRQ_MAGICIAN_AC,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = IRQ_MAGICIAN_VBUS,
+		.end   = IRQ_MAGICIAN_VBUS,
 	},
 	[1] = {
 		.name  = "usb",
-		.flags = IORESOURCE_IRQ,
-		.start = IRQ_MAGICIAN_AC,
-		.end   = IRQ_MAGICIAN_AC,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = IRQ_MAGICIAN_VBUS,
+		.end   = IRQ_MAGICIAN_VBUS,
 	},
 };
 
@@ -688,11 +727,9 @@ static void magician_set_vpp(struct map_info *map, int vpp)
 	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
 }
 
-#define PXA_CS_SIZE		0x04000000
-
 static struct resource strataflash_resource = {
 	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + PXA_CS_SIZE - 1,
+	.end   = PXA_CS0_PHYS + SZ_64M - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -720,6 +757,7 @@ static struct platform_device *devices[] __initdata = {
 	&egpio,
 	&backlight,
 	&pasic3,
+	&gpio_vbus,
 	&power_supply,
 	&strataflash,
 	&leds_gpio,
@@ -743,6 +781,7 @@ static void __init magician_init(void)
 		gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1);
 		pxa_set_ficp_info(&magician_ficp_info);
 	}
+	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 5f224968043..a6c8429e975 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -41,9 +41,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
+#include <mach/gpio.h>
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 33626de8cbf..7ffb91d64c3 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,15 +18,12 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa2xx.h>
 
 #include "generic.h"
 
-#define gpio_to_bank(gpio)	((gpio) >> 5)
-
 #define PGSR(x)		__REG2(0x40F00020, (x) << 2)
 #define __GAFR(u, x)	__REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
 #define GAFR_L(x)	__GAFR(0, x)
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index eb197a6e8e9..7a270eecd48 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -20,183 +20,9 @@
 #include <linux/sysdev.h>
 
 #include <mach/hardware.h>
-#include <mach/mfp.h>
 #include <mach/mfp-pxa3xx.h>
 #include <mach/pxa3xx-regs.h>
 
-/* mfp_spin_lock is used to ensure that MFP register configuration
- * (most likely a read-modify-write operation) is atomic, and that
- * mfp_table[] is consistent
- */
-static DEFINE_SPINLOCK(mfp_spin_lock);
-
-static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
-
-struct pxa3xx_mfp_pin {
-	unsigned long	config;		/* -1 for not configured */
-	unsigned long	mfpr_off;	/* MFPRxx Register offset */
-	unsigned long	mfpr_run;	/* Run-Mode Register Value */
-	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
-};
-
-static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
-
-/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
-static const unsigned long mfpr_lpm[] = {
-	MFPR_LPM_INPUT,
-	MFPR_LPM_DRIVE_LOW,
-	MFPR_LPM_DRIVE_HIGH,
-	MFPR_LPM_PULL_LOW,
-	MFPR_LPM_PULL_HIGH,
-	MFPR_LPM_FLOAT,
-};
-
-/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
-static const unsigned long mfpr_pull[] = {
-	MFPR_PULL_NONE,
-	MFPR_PULL_LOW,
-	MFPR_PULL_HIGH,
-	MFPR_PULL_BOTH,
-};
-
-/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-static const unsigned long mfpr_edge[] = {
-	MFPR_EDGE_NONE,
-	MFPR_EDGE_RISE,
-	MFPR_EDGE_FALL,
-	MFPR_EDGE_BOTH,
-};
-
-#define mfpr_readl(off)			\
-	__raw_readl(mfpr_mmio_base + (off))
-
-#define mfpr_writel(off, val)		\
-	__raw_writel(val, mfpr_mmio_base + (off))
-
-#define mfp_configured(p)	((p)->config != -1)
-
-/*
- * perform a read-back of any MFPR register to make sure the
- * previous writings are finished
- */
-#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + 0)
-
-static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
-{
-	if (mfp_configured(p))
-		mfpr_writel(p->mfpr_off, p->mfpr_run);
-}
-
-static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
-{
-	if (mfp_configured(p)) {
-		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
-		if (mfpr_clr != p->mfpr_run)
-			mfpr_writel(p->mfpr_off, mfpr_clr);
-		if (p->mfpr_lpm != mfpr_clr)
-			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
-	}
-}
-
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	for (i = 0; i < num; i++, mfp_cfgs++) {
-		unsigned long tmp, c = *mfp_cfgs;
-		struct pxa3xx_mfp_pin *p;
-		int pin, af, drv, lpm, edge, pull;
-
-		pin = MFP_PIN(c);
-		BUG_ON(pin >= MFP_PIN_MAX);
-		p = &mfp_table[pin];
-
-		af  = MFP_AF(c);
-		drv = MFP_DS(c);
-		lpm = MFP_LPM_STATE(c);
-		edge = MFP_LPM_EDGE(c);
-		pull = MFP_PULL(c);
-
-		/* run-mode pull settings will conflict with MFPR bits of
-		 * low power mode state,  calculate mfpr_run and mfpr_lpm
-		 * individually if pull != MFP_PULL_NONE
-		 */
-		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
-
-		if (likely(pull == MFP_PULL_NONE)) {
-			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_lpm = p->mfpr_run;
-		} else {
-			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_run = tmp | mfpr_pull[pull];
-		}
-
-		p->config = c; __mfp_config_run(p);
-	}
-
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-unsigned long pxa3xx_mfp_read(int mfp)
-{
-	unsigned long val, flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	val = mfpr_readl(mfp_table[mfp].mfpr_off);
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-
-	return val;
-}
-
-void pxa3xx_mfp_write(int mfp, unsigned long val)
-{
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	mfpr_writel(mfp_table[mfp].mfpr_off, val);
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
-{
-	struct pxa3xx_mfp_addr_map *p;
-	unsigned long offset, flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	for (p = map; p->start != MFP_PIN_INVALID; p++) {
-		offset = p->offset;
-		i = p->start;
-
-		do {
-			mfp_table[i].mfpr_off = offset;
-			mfp_table[i].mfpr_run = 0;
-			mfp_table[i].mfpr_lpm = 0;
-			offset += 4; i++;
-		} while ((i <= p->end) && (p->end != -1));
-	}
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_init_mfp(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
-		mfp_table[i].config = -1;
-}
-
 #ifdef CONFIG_PM
 /*
  * Configure the MFPs appropriately for suspend/resume.
@@ -207,23 +33,13 @@ void __init pxa3xx_init_mfp(void)
  */
 static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
-		struct pxa3xx_mfp_pin *p = &mfp_table[pin];
-		__mfp_config_lpm(p);
-	}
+	mfp_config_lpm();
 	return 0;
 }
 
 static int pxa3xx_mfp_resume(struct sys_device *d)
 {
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
-		struct pxa3xx_mfp_pin *p = &mfp_table[pin];
-		__mfp_config_run(p);
-	}
+	mfp_config_run();
 
 	/* clear RDH bit when MFP settings are restored
 	 *
@@ -231,7 +47,6 @@ static int pxa3xx_mfp_resume(struct sys_device *d)
 	 * preserve them here in case they will be referenced later
 	 */
 	ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
 	return 0;
 }
 #else
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2b427e015b6..97c93a7a285 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -36,13 +36,15 @@
 #include <linux/power_supply.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
+#include <mach/regs-rtc.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxafb.h>
-#include <mach/pxa2xx-regs.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
@@ -411,21 +413,6 @@ static void gsm_exit(void)
 /*
  * USB UDC
  */
-static void udc_power_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		gpio_set_value(GPIO22_USB_ENABLE, 0);
-		break;
-	case PXA2XX_UDC_CMD_CONNECT:
-		gpio_set_value(GPIO22_USB_ENABLE, 1);
-		break;
-	default:
-		printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
-		break;
-	}
-}
-
 static int is_usb_connected(void)
 {
 	return !gpio_get_value(GPIO13_nUSB_DETECT);
@@ -433,24 +420,15 @@ static int is_usb_connected(void)
 
 static struct pxa2xx_udc_mach_info mioa701_udc_info = {
 	.udc_is_connected = is_usb_connected,
-	.udc_command	  = udc_power_command,
+	.gpio_pullup	  = GPIO22_USB_ENABLE,
 };
 
-struct gpio_ress udc_gpios[] = {
-	MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
+struct gpio_vbus_mach_info gpio_vbus_data = {
+	.gpio_vbus = GPIO13_nUSB_DETECT,
+	.gpio_vbus_inverted = 1,
+	.gpio_pullup = -1,
 };
 
-static int __init udc_init(void)
-{
-	pxa_set_udc_info(&mioa701_udc_info);
-	return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
-}
-
-static void udc_exit(void)
-{
-	mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
-}
-
 /*
  * SDIO/MMC Card controller
  */
@@ -789,6 +767,7 @@ MIO_SIMPLE_DEV(pxa2xx_ac97,	  "pxa2xx-ac97",    NULL)
 MIO_PARENT_DEV(mio_wm9713_codec,  "wm9713-codec",   &pxa2xx_ac97.dev, NULL)
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
+MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
 
 static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
@@ -800,7 +779,8 @@ static struct platform_device *devices[] __initdata = {
 	&mioa701_sound,
 	&power_dev,
 	&strataflash,
-	&mioa701_board
+	&gpio_vbus,
+	&mioa701_board,
 };
 
 static void mioa701_machine_exit(void);
@@ -808,13 +788,13 @@ static void mioa701_machine_exit(void);
 static void mioa701_poweroff(void)
 {
 	mioa701_machine_exit();
-	arm_machine_restart('s');
+	arm_machine_restart('s', NULL);
 }
 
-static void mioa701_restart(char c)
+static void mioa701_restart(char c, const char *cmd)
 {
 	mioa701_machine_exit();
-	arm_machine_restart('s');
+	arm_machine_restart('s', cmd);
 }
 
 struct gpio_ress global_gpios[] = {
@@ -837,7 +817,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
-	udc_init();
+	pxa_set_udc_info(&mioa701_udc_info);
 	pm_power_off = mioa701_poweroff;
 	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -850,7 +830,6 @@ static void __init mioa701_machine_init(void)
 
 static void mioa701_machine_exit(void)
 {
-	udc_exit();
 	bootstrap_exit();
 	gsm_exit();
 }
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 8a73814126b..a65713ce019 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -19,10 +19,10 @@
 #include <linux/types.h>
 #include <linux/usb/isp116x.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+
+#include <mach/pxa25x.h>
 #include "generic.h"
 
 static void isp116x_pfm_delay(struct device *dev, int delay)
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
new file mode 100644
index 00000000000..8587477a9bb
--- /dev/null
+++ b/arch/arm/mach-pxa/palmld.c
@@ -0,0 +1,565 @@
+/*
+ * Hardware definitions for Palm LifeDrive
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Alex Osborne <ato@meshy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/palmld.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmld_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO116_GPIO,	/* SD r/o switch */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO108_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* GPIO KEYS */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO12_GPIO,	/* power switch */
+	GPIO15_GPIO,	/* lock switch */
+
+	/* LEDs */
+	GPIO52_GPIO,	/* green led */
+	GPIO94_GPIO,	/* orange led */
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO36_GPIO,	/* wifi power */
+	GPIO38_GPIO,	/* wifi ready */
+	GPIO81_GPIO,	/* wifi reset */
+
+	/* HDD */
+	GPIO95_GPIO,	/* HDD irq */
+	GPIO115_GPIO,	/* HDD power */
+
+	/* MISC */
+	GPIO13_GPIO,	/* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
+			palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		goto err2;
+	}
+
+	err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
+	if (err)
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
+	if (err)
+		goto err4;
+
+	err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
+	if (err)
+		goto err5;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+err4:
+	gpio_free(GPIO_NR_PALMLD_SD_POWER);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void palmld_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+	gpio_free(GPIO_NR_PALMLD_SD_POWER);
+	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+}
+
+static void palmld_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmld_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmld_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmld_mci_power,
+	.get_ro		= palmld_mci_get_ro,
+	.init 		= palmld_mci_init,
+	.exit		= palmld_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmld_matrix_keys[] = {
+	KEY(0, 1, KEY_F2),
+	KEY(0, 2, KEY_UP),
+
+	KEY(1, 0, KEY_F3),
+	KEY(1, 1, KEY_F4),
+	KEY(1, 2, KEY_RIGHT),
+
+	KEY(2, 0, KEY_F1),
+	KEY(2, 1, KEY_F5),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_F6),
+	KEY(3, 1, KEY_ENTER),
+	KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmld_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmld_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmld_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
+	{KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
+};
+
+static struct gpio_keys_platform_data palmld_pxa_keys_data = {
+	.buttons	= palmld_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmld_pxa_buttons),
+};
+
+static struct platform_device palmld_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmld_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmld_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_PALMLD_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmld_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmld_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMLD_BL_POWER);
+	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmld_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMLD_MAX_INTENSITY,
+	.dft_brightness	= PALMLD_MAX_INTENSITY,
+	.pwm_period_ns	= PALMLD_PERIOD_NS,
+	.init		= palmld_backlight_init,
+	.notify		= palmld_backlight_notify,
+	.exit		= palmld_backlight_exit,
+};
+
+static struct platform_device palmld_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmld_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmld_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmld_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+}
+
+static void palmld_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmld_ficp_platform_data = {
+	.startup		= palmld_irda_startup,
+	.shutdown		= palmld_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmld_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+struct gpio_led gpio_leds[] = {
+{
+	.name			= "palmld:green:led",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMLD_LED_GREEN,
+}, {
+	.name			= "palmld:amber:led",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMLD_LED_AMBER,
+},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmld_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	}
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
+	if (ret)
+		goto err3;
+
+	return 0;
+
+err3:
+	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+err2:
+	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int palmld_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static int palmld_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static char *palmld_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmld_is_ac_online,
+	.is_usb_online   = palmld_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmld_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmld_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMLD_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMLD_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmld_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmld_lcd_screen = {
+	.modes		= palmld_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmld_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmld_pxa_keys,
+#endif
+	&palmld_backlight,
+	&palmld_leds,
+	&power_supply,
+};
+
+static struct map_desc palmld_io_desc[] __initdata = {
+{
+	.virtual	= PALMLD_IDE_VIRT,
+	.pfn		= __phys_to_pfn(PALMLD_IDE_PHYS),
+	.length		= PALMLD_IDE_SIZE,
+	.type		= MT_DEVICE
+},
+{
+	.virtual	= PALMLD_USB_VIRT,
+	.pfn		= __phys_to_pfn(PALMLD_USB_PHYS),
+	.length		= PALMLD_USB_SIZE,
+	.type		= MT_DEVICE
+},
+};
+
+static void __init palmld_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
+}
+
+static void __init palmld_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+
+	set_pxa_fb_info(&palmld_lcd_screen);
+	pxa_set_mci_info(&palmld_mci_platform_data);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmld_ficp_platform_data);
+	pxa_set_keypad_info(&palmld_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMLD, "Palm LifeDrive")
+	.phys_io	= PALMLD_PHYS_IO_START,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= palmld_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmld_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
new file mode 100644
index 00000000000..9521c7b3349
--- /dev/null
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -0,0 +1,496 @@
+/*
+ * Hardware definitions for Palm Tungsten|T5
+ *
+ * Author:	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Ales Snuparek <snuparek@atlas.cz>
+ *		Justin Kendrick <twilightsentry@gmail.com>
+ *		RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/palmt5.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmt5_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO115_GPIO,	/* SD r/o switch */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO40_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* USB */
+	GPIO15_GPIO,	/* usb detect */
+	GPIO95_GPIO,	/* usb power */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* MISC */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO90_GPIO,	/* power detect */
+	GPIO107_GPIO,	/* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
+			palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		goto err2;
+	}
+
+	err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
+	if (err)
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
+	if (err)
+		goto err4;
+
+	err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
+	if (err)
+		goto err5;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+err4:
+	gpio_free(GPIO_NR_PALMT5_SD_POWER);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void palmt5_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+	gpio_free(GPIO_NR_PALMT5_SD_POWER);
+	free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
+	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+}
+
+static void palmt5_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmt5_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmt5_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmt5_mci_power,
+	.get_ro		= palmt5_mci_get_ro,
+	.init 		= palmt5_mci_init,
+	.exit		= palmt5_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmt5_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmt5_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmt5_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmt5_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
+	.buttons	= palmt5_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmt5_pxa_buttons),
+};
+
+static struct platform_device palmt5_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmt5_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmt5_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_PALMT5_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmt5_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmt5_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMT5_BL_POWER);
+	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmt5_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMT5_MAX_INTENSITY,
+	.dft_brightness	= PALMT5_MAX_INTENSITY,
+	.pwm_period_ns	= PALMT5_PERIOD_NS,
+	.init		= palmt5_backlight_init,
+	.notify		= palmt5_backlight_notify,
+	.exit		= palmt5_backlight_exit,
+};
+
+static struct platform_device palmt5_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmt5_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmt5_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmt5_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+}
+
+static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmt5_ficp_platform_data = {
+	.startup		= palmt5_irda_startup,
+	.shutdown		= palmt5_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmt5_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.gpio_pullup		= GPIO_NR_PALMT5_USB_POWER,
+	.gpio_pullup_inverted	= 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int palmt5_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static char *palmt5_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmt5_is_ac_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmt5_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmt5_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMT5_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMT5_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmt5_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmt5_lcd_screen = {
+	.modes		= palmt5_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmt5_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmt5_pxa_keys,
+#endif
+	&palmt5_backlight,
+	&power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmt5_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
+		gpio_free(GPIO_NR_PALMT5_USB_POWER);
+	}
+}
+
+static void __init palmt5_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+
+	set_pxa_fb_info(&palmt5_lcd_screen);
+	pxa_set_mci_info(&palmt5_mci_platform_data);
+	palmt5_udc_init();
+	pxa_set_udc_info(&palmt5_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmt5_ficp_platform_data);
+	pxa_set_keypad_info(&palmt5_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMT5, "Palm Tungsten|T5")
+	.phys_io	= PALMT5_PHYS_IO_START,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmt5_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index a9d94f5dbec..b490c092461 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -32,12 +32,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmtx.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 2f730da3bba..b88eb4dd2c8 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -33,13 +33,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmz72.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 36135a02fdc..6abfa2979c6 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,10 +29,7 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pcm027.h>
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 34841c72815..f46698e20c1 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -31,13 +31,12 @@
 #include <mach/i2c.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pcm990_baseboard.h>
 #include <mach/pxafb.h>
-#include <mach/mfp-pxa27x.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 164eb0bb632..884b174c8ea 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -14,15 +14,8 @@
 #include <linux/module.h>
 #include <linux/suspend.h>
 #include <linux/errno.h>
-#include <linux/time.h>
 
-#include <mach/hardware.h>
-#include <asm/memory.h>
-#include <asm/system.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
-#include <mach/lubbock.h>
-#include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
 static unsigned long *sleep_save;
@@ -57,9 +50,9 @@ int pxa_pm_enter(suspend_state_t state)
 
 		/* if invalid, display message and wait for a hardware reset */
 		if (checksum != sleep_save_checksum) {
-#ifdef CONFIG_ARCH_LUBBOCK
-			LUB_HEXLED = 0xbadbadc5;
-#endif
+
+			lubbock_set_hexled(0xbadbadc5);
+
 			while (1)
 				pxa_cpu_pm_fns->enter(state);
 		}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f9093beba75..036bbde4d22 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -36,9 +36,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/i2c.h>
@@ -503,12 +501,12 @@ static struct platform_device *devices[] __initdata = {
 
 static void poodle_poweroff(void)
 {
-	arm_machine_restart('h');
+	arm_machine_restart('h', NULL);
 }
 
-static void poodle_restart(char mode)
+static void poodle_restart(char mode, const char *cmd)
 {
-	arm_machine_restart('h');
+	arm_machine_restart('h', cmd);
 }
 
 static void __init poodle_init(void)
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index 3ca7ffc6904..fcdd374437a 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,6 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6c57522e246..77c2693cfee 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,9 +25,8 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/gpio.h>
+#include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
@@ -310,14 +309,14 @@ set_pwer:
 void __init pxa25x_init_irq(void)
 {
 	pxa_init_irq(32, pxa25x_set_wake);
-	pxa_init_gpio(85, pxa25x_set_wake);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
 }
 
 #ifdef CONFIG_CPU_PXA26x
 void __init pxa26x_init_irq(void)
 {
 	pxa_init_irq(32, pxa25x_set_wake);
-	pxa_init_gpio(90, pxa25x_set_wake);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
 }
 #endif
 
@@ -355,7 +354,7 @@ static int __init pxa25x_init(void)
 
 		clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
 
-		if ((ret = pxa_init_dma(16)))
+		if ((ret = pxa_init_dma(IRQ_DMA, 16)))
 			return ret;
 
 		pxa25x_init_pm();
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 411bec54fdc..a425ec71e65 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -21,9 +21,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/gpio.h>
+#include <mach/pxa27x.h>
 #include <mach/reset.h>
 #include <mach/ohci.h>
 #include <mach/pm.h>
@@ -332,7 +331,7 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on)
 void __init pxa27x_init_irq(void)
 {
 	pxa_init_irq(34, pxa27x_set_wake);
-	pxa_init_gpio(121, pxa27x_set_wake);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
 }
 
 /*
@@ -381,7 +380,7 @@ static int __init pxa27x_init(void)
 
 		clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
 
-		if ((ret = pxa_init_dma(32)))
+		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
 
 		pxa27x_init_pm();
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 73d04d81c75..2f3394f8591 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -16,7 +16,6 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
 #include <mach/mfp-pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 83fb609b6eb..4ba6d21f851 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -17,15 +17,13 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
 
 #include "generic.h"
 #include "devices.h"
 #include "clock.h"
 
-static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
 	MFP_ADDR_X(GPIO3,   GPIO26,  0x027c),
@@ -74,7 +72,7 @@ static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 };
 
 /* override pxa300 MFP register addresses */
-static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_X(GPIO30,  GPIO98,   0x0418),
 	MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
 
@@ -100,13 +98,13 @@ static struct clk_lookup pxa310_clkregs[] = {
 static int __init pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-		pxa3xx_init_mfp();
-		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+		mfp_init_base(io_p2v(MFPR_BASE));
+		mfp_init_addr(pxa300_mfp_addr_map);
 		clks_register(ARRAY_AND_SIZE(common_clkregs));
 	}
 
 	if (cpu_is_pxa310()) {
-		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+		mfp_init_addr(pxa310_mfp_addr_map);
 		clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
 	}
 
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 36f066196fa..8b3d97efada 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -17,16 +17,13 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
 
 #include "generic.h"
 #include "devices.h"
 #include "clock.h"
 
-static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
 	MFP_ADDR_X(GPIO5,  GPIO9,   0x028C),
@@ -89,8 +86,8 @@ static struct clk_lookup pxa320_clkregs[] = {
 static int __init pxa320_init(void)
 {
 	if (cpu_is_pxa320()) {
-		pxa3xx_init_mfp();
-		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+		mfp_init_base(io_p2v(MFPR_BASE));
+		mfp_init_addr(pxa320_mfp_addr_map);
 		clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
 	}
 
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 490893824e7..b02d4544dc9 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -23,6 +23,7 @@
 #include <linux/sysdev.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/reset.h>
 #include <mach/ohci.h>
@@ -538,7 +539,7 @@ void __init pxa3xx_init_irq(void)
 	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
 
 	pxa_init_irq(56, pxa3xx_set_wake);
-	pxa_init_gpio(128, NULL);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
 /*
@@ -594,7 +595,7 @@ static int __init pxa3xx_init(void)
 
 		clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
 
-		if ((ret = pxa_init_dma(32)))
+		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
 
 		pxa3xx_init_pm();
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 13e6bfdfff6..71131742fff 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -16,10 +16,9 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 
-#include <mach/hardware.h>
-#include <mach/mfp-pxa930.h>
+#include <mach/pxa930.h>
 
-static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR(GPIO0, 0x02e0),
 	MFP_ADDR(GPIO1, 0x02dc),
@@ -180,8 +179,8 @@ static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 static int __init pxa930_init(void)
 {
 	if (cpu_is_pxa930()) {
-		pxa3xx_init_mfp();
-		pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+		mfp_init_base(io_p2v(MFPR_BASE));
+		mfp_init_addr(pxa930_mfp_addr_map);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 00b2dc2a107..df29d45fb4e 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,7 +10,7 @@
 #include <linux/io.h>
 #include <asm/proc-fns.h>
 
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
 #include <mach/reset.h>
 
 unsigned int reset_status;
@@ -81,7 +81,7 @@ static void do_hw_reset(void)
 	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
 }
 
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
 {
 	clear_reset_status(RESET_STATUS_ALL);
 
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 5d02a732558..ff823999143 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -25,11 +25,9 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
 #include <mach/i2c.h>
-#include <mach/regs-lcd.h>
 #include <mach/pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index f0845c1b001..16b4ec67e3b 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -25,7 +25,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/sharpsl.h>
 #include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index a62c8375eb5..2ed95f369cf 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -15,7 +15,6 @@
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 6d447c9ce8a..7a0a430222c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -44,9 +44,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
 #include <mach/i2c.h>
@@ -703,10 +701,10 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	arm_machine_restart('g');
+	arm_machine_restart('g', NULL);
 }
 
-static void spitz_restart(char mode)
+static void spitz_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
 	if((MSC0 & 0xffff0000) == 0x7ff00000)
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 072e77cfe5a..2e4490562c9 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -24,7 +24,6 @@
 
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 6f42004db3e..965e38c6baf 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -33,7 +33,6 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/ssp.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index f3821cfda72..29f5f5c180b 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -13,7 +13,6 @@
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 
 		.text
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 58ef08a5224..b75353a2ec7 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -22,9 +22,8 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
 #include <mach/pxafb.h>
 #include <mach/pxa27x_keypad.h>
 
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 95656a72268..8eb3830fbb0 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,8 +22,7 @@
 #include <asm/div64.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
 
 /*
  * This is PXA's sched_clock implementation. This has a resolution
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 3332e5d0356..6e8ade6ae33 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -36,8 +36,8 @@
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+
+#include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
 #include <mach/i2c.h>
@@ -876,10 +876,10 @@ static struct platform_device *devices[] __initdata = {
 
 static void tosa_poweroff(void)
 {
-	arm_machine_restart('g');
+	arm_machine_restart('g', NULL);
 }
 
-static void tosa_restart(char mode)
+static void tosa_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
 	if((MSC0 & 0xffff0000) == 0x7ff00000)
@@ -919,7 +919,7 @@ static void __init tosa_init(void)
 	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
-	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index a72e3add743..f79c9cb70ae 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -39,10 +39,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 4b3120dbc04..0e65344e9f5 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -42,12 +42,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/bitfield.h>
+#include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
 #include <mach/i2c.h>
 #include <mach/viper.h>
 
@@ -956,7 +953,7 @@ static struct map_desc viper_io_desc[] __initdata = {
 	},
 	{
 		.virtual = VIPER_PC104IO_BASE,
-		.pfn     = __phys_to_pfn(_PCMCIA1IO),
+		.pfn     = __phys_to_pfn(0x30000000),
 		.length  = 0x00800000,
 		.type    = MT_DEVICE,
 	},
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 46538885a58..c1f73205d07 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -18,9 +18,9 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
 
-#include <asm/gpio.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
 #include <mach/i2c.h>
 #include <mach/zylonite.h>
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 28e4e623780..4e1c488c690 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
 #include <mach/zylonite.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index ad911854eb4..b6ec1062777 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -35,6 +35,7 @@ config MACH_REALVIEW_PB11MP
 	bool "Support RealView/PB11MPCore platform"
 	select CPU_V6
 	select ARM_GIC
+	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
 	  PB11MPCore is a platform with an on-board ARM11MPCore and has
@@ -51,6 +52,7 @@ config MACH_REALVIEW_PBA8
 	bool "Support RealView/PB-A8 platform"
 	select CPU_V7
 	select ARM_GIC
+	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
 	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index bd2aa4f1614..d6766685cfc 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,6 +29,7 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/smc911x.h>
+#include <linux/ata_platform.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
@@ -150,6 +151,44 @@ int realview_eth_register(const char *name, struct resource *res)
 	return platform_device_register(&realview_eth_device);
 }
 
+struct platform_device realview_usb_device = {
+	.name			= "isp1760",
+	.num_resources		= 2,
+};
+
+int realview_usb_register(struct resource *res)
+{
+	realview_usb_device.resource = res;
+	return platform_device_register(&realview_usb_device);
+}
+
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift		= 1,
+};
+
+static struct resource pata_resources[] = {
+	[0] = {
+		.start		= REALVIEW_CF_BASE,
+		.end		= REALVIEW_CF_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_CF_BASE + 0x100,
+		.end		= REALVIEW_CF_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device realview_cf_device = {
+	.name			= "pata_platform",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(pata_resources),
+	.resource		= pata_resources,
+	.dev			= {
+		.platform_data	= &pata_platform_data,
+	},
+};
+
 static struct resource realview_i2c_resource = {
 	.start		= REALVIEW_I2C_BASE,
 	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
@@ -158,11 +197,25 @@ static struct resource realview_i2c_resource = {
 
 struct platform_device realview_i2c_device = {
 	.name		= "versatile-i2c",
-	.id		= -1,
+	.id		= 0,
 	.num_resources	= 1,
 	.resource	= &realview_i2c_resource,
 };
 
+static struct i2c_board_info realview_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+		.type = "ds1338",
+	},
+};
+
+static int __init realview_i2c_init(void)
+{
+	return i2c_register_board_info(0, realview_i2c_board_info,
+				       ARRAY_SIZE(realview_i2c_board_info));
+}
+arch_initcall(realview_i2c_init);
+
 #define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 
 static unsigned int realview_mmc_status(struct device *dev)
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 44269b162d4..21c08637683 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -45,6 +45,7 @@ static struct amba_device name##_device = {			\
 }
 
 extern struct platform_device realview_flash_device;
+extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
 extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
@@ -62,5 +63,6 @@ extern void realview_leds_event(led_event_t ledevt);
 extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
+extern int realview_usb_register(struct resource *res);
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index c8bed8f58ba..307f97b16e5 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -45,8 +45,6 @@
 #define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
 #define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
 #define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBA8_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PBA8_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
 #define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_PBA8_FLASH0_BASE		0x40000000
 #define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 793a3a33271..c8f50835fed 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -204,6 +204,12 @@
 #define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
 
 /*
+ * CompactFlash
+ */
+#define REALVIEW_CF_BASE		0x18000000	/* CompactFlash */
+#define REALVIEW_CF_MEM_BASE		0x18003000	/* SMC for CompactFlash */
+
+/*
  * Disk on Chip
  */
 #define REALVIEW_DOC_BASE             0x2C000000
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index a2f61c78adb..1a15a441e02 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -34,7 +34,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
 	unsigned int val;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index bed39ed9761..c20fbef122b 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -264,6 +264,19 @@ static int eth_device_register(void)
 	return realview_eth_register(name, realview_eb_eth_resources);
 }
 
+static struct resource realview_eb_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_EB_USB_BASE,
+		.end		= REALVIEW_EB_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_EB_USB,
+		.end		= IRQ_EB_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -323,6 +336,8 @@ static void realview_eb11mp_fixup(void)
 	/* platform devices */
 	realview_eb_eth_resources[1].start	= IRQ_EB11MP_ETH;
 	realview_eb_eth_resources[1].end	= IRQ_EB11MP_ETH;
+	realview_eb_isp1761_resources[1].start	= IRQ_EB11MP_USB;
+	realview_eb_isp1761_resources[1].end	= IRQ_EB11MP_USB;
 }
 
 static void __init realview_eb_timer_init(void)
@@ -366,6 +381,7 @@ static void __init realview_eb_init(void)
 	realview_flash_register(&realview_eb_flash_resource, 1);
 	platform_device_register(&realview_i2c_device);
 	eth_device_register();
+	realview_usb_register(realview_eb_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 8f0683c2214..a64b84a7a3d 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -222,6 +222,19 @@ static struct resource realview_pb1176_smsc911x_resources[] = {
 	},
 };
 
+static struct resource realview_pb1176_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB1176_USB_BASE,
+		.end		= REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PB1176_USB,
+		.end		= IRQ_PB1176_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -260,6 +273,8 @@ static void __init realview_pb1176_init(void)
 
 	realview_flash_register(&realview_pb1176_flash_resource, 1);
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
+	platform_device_register(&realview_i2c_device);
+	realview_usb_register(realview_pb1176_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 3ebdb2dadd6..ea1e60eca35 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -230,31 +230,19 @@ static struct resource realview_pb11mp_smsc911x_resources[] = {
 	},
 };
 
-struct resource realview_pb11mp_cf_resources[] = {
+static struct resource realview_pb11mp_isp1761_resources[] = {
 	[0] = {
-		.start		= REALVIEW_PB11MP_CF_BASE,
-		.end		= REALVIEW_PB11MP_CF_BASE + SZ_4K - 1,
+		.start		= REALVIEW_PB11MP_USB_BASE,
+		.end		= REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= REALVIEW_PB11MP_CF_MEM_BASE,
-		.end		= REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start		= -1,		/* FIXME: Find correct irq */
-		.end		= -1,
+		.start		= IRQ_TC11MP_USB,
+		.end		= IRQ_TC11MP_USB,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
 
-struct platform_device realview_pb11mp_cf_device = {
-	.name		= "compactflash",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(realview_pb11mp_cf_resources),
-	.resource	= realview_pb11mp_cf_resources,
-};
-
 static void __init gic_init_irq(void)
 {
 	unsigned int pldctrl;
@@ -308,7 +296,8 @@ static void __init realview_pb11mp_init(void)
 				ARRAY_SIZE(realview_pb11mp_flash_resource));
 	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_pb11mp_cf_device);
+	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pb11mp_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 34c94435d2d..d6ac1eb8657 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -221,31 +221,19 @@ static struct resource realview_pba8_smsc911x_resources[] = {
 	},
 };
 
-struct resource realview_pba8_cf_resources[] = {
+static struct resource realview_pba8_isp1761_resources[] = {
 	[0] = {
-		.start		= REALVIEW_PBA8_CF_BASE,
-		.end		= REALVIEW_PBA8_CF_BASE + SZ_4K - 1,
+		.start		= REALVIEW_PBA8_USB_BASE,
+		.end		= REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= REALVIEW_PBA8_CF_MEM_BASE,
-		.end		= REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start		= -1,		/* FIXME: Find correct irq */
-		.end		= -1,
+		.start		= IRQ_PBA8_USB,
+		.end		= IRQ_PBA8_USB,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
 
-struct platform_device realview_pba8_cf_device = {
-	.name		= "compactflash",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(realview_pba8_cf_resources),
-	.resource	= realview_pba8_cf_resources,
-};
-
 static void __init gic_init_irq(void)
 {
 	/* ARM PB-A8 on-board GIC */
@@ -276,7 +264,8 @@ static void __init realview_pba8_init(void)
 				ARRAY_SIZE(realview_pba8_flash_resource));
 	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_pba8_cf_device);
+	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pba8_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 7958a30f893..c47d974d52b 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -26,6 +26,16 @@
 #include <asm/mach/dma.h>
 #include <asm/hardware/iomd.h>
 
+struct iomd_dma {
+	struct dma_struct	dma;
+	unsigned int		state;
+	unsigned long		base;		/* Controller base address */
+	int			irq;		/* Controller IRQ */
+	struct scatterlist	cur_sg;		/* Current controller buffer */
+	dma_addr_t		dma_addr;
+	unsigned int		dma_len;
+};
+
 #if 0
 typedef enum {
 	dma_size_8	= 1,
@@ -44,15 +54,15 @@ typedef enum {
 #define CR	(IOMD_IO0CR - IOMD_IO0CURA)
 #define ST	(IOMD_IO0ST - IOMD_IO0CURA)
 
-static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
+static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 {
 	unsigned long end, offset, flags = 0;
 
-	if (dma->sg) {
-		sg->dma_address = dma->sg->dma_address;
+	if (idma->dma.sg) {
+		sg->dma_address = idma->dma_addr;
 		offset = sg->dma_address & ~PAGE_MASK;
 
-		end = offset + dma->sg->length;
+		end = offset + idma->dma_len;
 
 		if (end > PAGE_SIZE)
 			end = PAGE_SIZE;
@@ -62,15 +72,17 @@ static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
 
 		sg->length = end - TRANSFER_SIZE;
 
-		dma->sg->length -= end - offset;
-		dma->sg->dma_address += end - offset;
+		idma->dma_len -= end - offset;
+		idma->dma_addr += end - offset;
 
-		if (dma->sg->length == 0) {
-			if (dma->sgcount > 1) {
-				dma->sg++;
-				dma->sgcount--;
+		if (idma->dma_len == 0) {
+			if (idma->dma.sgcount > 1) {
+				idma->dma.sg = sg_next(idma->dma.sg);
+				idma->dma_addr = idma->dma.sg->dma_address;
+				idma->dma_len = idma->dma.sg->length;
+				idma->dma.sgcount--;
 			} else {
-				dma->sg = NULL;
+				idma->dma.sg = NULL;
 				flags |= DMA_END_S;
 			}
 		}
@@ -85,8 +97,8 @@ static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
 
 static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
 {
-	dma_t *dma = (dma_t *)dev_id;
-	unsigned long base = dma->dma_base;
+	struct iomd_dma *idma = dev_id;
+	unsigned long base = idma->base;
 
 	do {
 		unsigned int status;
@@ -95,93 +107,99 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
 		if (!(status & DMA_ST_INT))
 			return IRQ_HANDLED;
 
-		if ((dma->state ^ status) & DMA_ST_AB)
-			iomd_get_next_sg(&dma->cur_sg, dma);
+		if ((idma->state ^ status) & DMA_ST_AB)
+			iomd_get_next_sg(&idma->cur_sg, idma);
 
 		switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
 		case DMA_ST_OFL:			/* OIA */
 		case DMA_ST_AB:				/* .IB */
-			iomd_writel(dma->cur_sg.dma_address, base + CURA);
-			iomd_writel(dma->cur_sg.length, base + ENDA);
-			dma->state = DMA_ST_AB;
+			iomd_writel(idma->cur_sg.dma_address, base + CURA);
+			iomd_writel(idma->cur_sg.length, base + ENDA);
+			idma->state = DMA_ST_AB;
 			break;
 
 		case DMA_ST_OFL | DMA_ST_AB:		/* OIB */
 		case 0:					/* .IA */
-			iomd_writel(dma->cur_sg.dma_address, base + CURB);
-			iomd_writel(dma->cur_sg.length, base + ENDB);
-			dma->state = 0;
+			iomd_writel(idma->cur_sg.dma_address, base + CURB);
+			iomd_writel(idma->cur_sg.length, base + ENDB);
+			idma->state = 0;
 			break;
 		}
 
 		if (status & DMA_ST_OFL &&
-		    dma->cur_sg.length == (DMA_END_S|DMA_END_L))
+		    idma->cur_sg.length == (DMA_END_S|DMA_END_L))
 			break;
 	} while (1);
 
-	dma->state = ~DMA_ST_AB;
+	idma->state = ~DMA_ST_AB;
 	disable_irq(irq);
 
 	return IRQ_HANDLED;
 }
 
-static int iomd_request_dma(dmach_t channel, dma_t *dma)
+static int iomd_request_dma(unsigned int chan, dma_t *dma)
 {
-	return request_irq(dma->dma_irq, iomd_dma_handle,
-			   IRQF_DISABLED, dma->device_id, dma);
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+	return request_irq(idma->irq, iomd_dma_handle,
+			   IRQF_DISABLED, idma->dma.device_id, idma);
 }
 
-static void iomd_free_dma(dmach_t channel, dma_t *dma)
+static void iomd_free_dma(unsigned int chan, dma_t *dma)
 {
-	free_irq(dma->dma_irq, dma);
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+	free_irq(idma->irq, idma);
 }
 
-static void iomd_enable_dma(dmach_t channel, dma_t *dma)
+static void iomd_enable_dma(unsigned int chan, dma_t *dma)
 {
-	unsigned long dma_base = dma->dma_base;
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+	unsigned long dma_base = idma->base;
 	unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
 
-	if (dma->invalid) {
-		dma->invalid = 0;
+	if (idma->dma.invalid) {
+		idma->dma.invalid = 0;
 
 		/*
 		 * Cope with ISA-style drivers which expect cache
 		 * coherence.
 		 */
-		if (!dma->sg) {
-			dma->sg = &dma->buf;
-			dma->sgcount = 1;
-			dma->buf.length = dma->count;
-			dma->buf.dma_address = dma_map_single(NULL,
-				dma->addr, dma->count,
-				dma->dma_mode == DMA_MODE_READ ?
+		if (!idma->dma.sg) {
+			idma->dma.sg = &idma->dma.buf;
+			idma->dma.sgcount = 1;
+			idma->dma.buf.length = idma->dma.count;
+			idma->dma.buf.dma_address = dma_map_single(NULL,
+				idma->dma.addr, idma->dma.count,
+				idma->dma.dma_mode == DMA_MODE_READ ?
 				DMA_FROM_DEVICE : DMA_TO_DEVICE);
 		}
 
 		iomd_writeb(DMA_CR_C, dma_base + CR);
-		dma->state = DMA_ST_AB;
+		idma->state = DMA_ST_AB;
 	}
-		
-	if (dma->dma_mode == DMA_MODE_READ)
+
+	if (idma->dma.dma_mode == DMA_MODE_READ)
 		ctrl |= DMA_CR_D;
 
 	iomd_writeb(ctrl, dma_base + CR);
-	enable_irq(dma->dma_irq);
+	enable_irq(idma->irq);
 }
 
-static void iomd_disable_dma(dmach_t channel, dma_t *dma)
+static void iomd_disable_dma(unsigned int chan, dma_t *dma)
 {
-	unsigned long dma_base = dma->dma_base;
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+	unsigned long dma_base = idma->base;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	if (dma->state != ~DMA_ST_AB)
-		disable_irq(dma->dma_irq);
+	if (idma->state != ~DMA_ST_AB)
+		disable_irq(idma->irq);
 	iomd_writeb(0, dma_base + CR);
 	local_irq_restore(flags);
 }
 
-static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle)
+static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
 {
 	int tcr, speed;
 
@@ -197,7 +215,7 @@ static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle)
 	tcr = iomd_readb(IOMD_DMATCR);
 	speed &= 3;
 
-	switch (channel) {
+	switch (chan) {
 	case DMA_0:
 		tcr = (tcr & ~0x03) | speed;
 		break;
@@ -236,16 +254,22 @@ static struct fiq_handler fh = {
 	.name	= "floppydma"
 };
 
-static void floppy_enable_dma(dmach_t channel, dma_t *dma)
+struct floppy_dma {
+	struct dma_struct	dma;
+	unsigned int		fiq;
+};
+
+static void floppy_enable_dma(unsigned int chan, dma_t *dma)
 {
+	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
 	void *fiqhandler_start;
 	unsigned int fiqhandler_length;
 	struct pt_regs regs;
 
-	if (dma->sg)
+	if (fdma->dma.sg)
 		BUG();
 
-	if (dma->dma_mode == DMA_MODE_READ) {
+	if (fdma->dma.dma_mode == DMA_MODE_READ) {
 		extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
 		fiqhandler_start = &floppy_fiqin_start;
 		fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
@@ -255,8 +279,8 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma)
 		fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
 	}
 
-	regs.ARM_r9  = dma->count;
-	regs.ARM_r10 = (unsigned long)dma->addr;
+	regs.ARM_r9  = fdma->dma.count;
+	regs.ARM_r10 = (unsigned long)fdma->dma.addr;
 	regs.ARM_fp  = (unsigned long)FLOPPYDMA_BASE;
 
 	if (claim_fiq(&fh)) {
@@ -266,16 +290,17 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma)
 
 	set_fiq_handler(fiqhandler_start, fiqhandler_length);
 	set_fiq_regs(&regs);
-	enable_fiq(dma->dma_irq);
+	enable_fiq(fdma->fiq);
 }
 
-static void floppy_disable_dma(dmach_t channel, dma_t *dma)
+static void floppy_disable_dma(unsigned int chan, dma_t *dma)
 {
-	disable_fiq(dma->dma_irq);
+	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
+	disable_fiq(fdma->fiq);
 	release_fiq(&fh);
 }
 
-static int floppy_get_residue(dmach_t channel, dma_t *dma)
+static int floppy_get_residue(unsigned int chan, dma_t *dma)
 {
 	struct pt_regs regs;
 	get_fiq_regs(&regs);
@@ -292,7 +317,7 @@ static struct dma_ops floppy_dma_ops = {
 /*
  * This is virtual DMA - we don't need anything here.
  */
-static void sound_enable_disable_dma(dmach_t channel, dma_t *dma)
+static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
 {
 }
 
@@ -302,8 +327,24 @@ static struct dma_ops sound_dma_ops = {
 	.disable	= sound_enable_disable_dma,
 };
 
-void __init arch_dma_init(dma_t *dma)
+static struct iomd_dma iomd_dma[6];
+
+static struct floppy_dma floppy_dma = {
+	.dma		= {
+		.d_ops	= &floppy_dma_ops,
+	},
+	.fiq		= FIQ_FLOPPYDATA,
+};
+
+static dma_t sound_dma = {
+	.d_ops		= &sound_dma_ops,
+};
+
+static int __init rpc_dma_init(void)
 {
+	unsigned int i;
+	int ret;
+
 	iomd_writeb(0, IOMD_IO0CR);
 	iomd_writeb(0, IOMD_IO1CR);
 	iomd_writeb(0, IOMD_IO2CR);
@@ -311,31 +352,39 @@ void __init arch_dma_init(dma_t *dma)
 
 	iomd_writeb(0xa0, IOMD_DMATCR);
 
-	dma[DMA_0].dma_base		= IOMD_IO0CURA;
-	dma[DMA_0].dma_irq		= IRQ_DMA0;
-	dma[DMA_0].d_ops		= &iomd_dma_ops;
-	dma[DMA_1].dma_base		= IOMD_IO1CURA;
-	dma[DMA_1].dma_irq		= IRQ_DMA1;
-	dma[DMA_1].d_ops		= &iomd_dma_ops;
-	dma[DMA_2].dma_base		= IOMD_IO2CURA;
-	dma[DMA_2].dma_irq		= IRQ_DMA2;
-	dma[DMA_2].d_ops		= &iomd_dma_ops;
-	dma[DMA_3].dma_base		= IOMD_IO3CURA;
-	dma[DMA_3].dma_irq		= IRQ_DMA3;
-	dma[DMA_3].d_ops		= &iomd_dma_ops;
-	dma[DMA_S0].dma_base		= IOMD_SD0CURA;
-	dma[DMA_S0].dma_irq		= IRQ_DMAS0;
-	dma[DMA_S0].d_ops		= &iomd_dma_ops;
-	dma[DMA_S1].dma_base		= IOMD_SD1CURA;
-	dma[DMA_S1].dma_irq		= IRQ_DMAS1;
-	dma[DMA_S1].d_ops		= &iomd_dma_ops;
-	dma[DMA_VIRTUAL_FLOPPY].dma_irq	= FIQ_FLOPPYDATA;
-	dma[DMA_VIRTUAL_FLOPPY].d_ops	= &floppy_dma_ops;
-	dma[DMA_VIRTUAL_SOUND].d_ops	= &sound_dma_ops;
-
 	/*
 	 * Setup DMA channels 2,3 to be for podules
 	 * and channels 0,1 for internal devices
 	 */
 	iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
+
+	iomd_dma[DMA_0].base	= IOMD_IO0CURA;
+	iomd_dma[DMA_0].irq	= IRQ_DMA0;
+	iomd_dma[DMA_1].base	= IOMD_IO1CURA;
+	iomd_dma[DMA_1].irq	= IRQ_DMA1;
+	iomd_dma[DMA_2].base	= IOMD_IO2CURA;
+	iomd_dma[DMA_2].irq	= IRQ_DMA2;
+	iomd_dma[DMA_3].base	= IOMD_IO3CURA;
+	iomd_dma[DMA_3].irq	= IRQ_DMA3;
+	iomd_dma[DMA_S0].base	= IOMD_SD0CURA;
+	iomd_dma[DMA_S0].irq	= IRQ_DMAS0;
+	iomd_dma[DMA_S1].base	= IOMD_SD1CURA;
+	iomd_dma[DMA_S1].irq	= IRQ_DMAS1;
+
+	for (i = DMA_0; i <= DMA_S1; i++) {
+		iomd_dma[i].dma.d_ops = &iomd_dma_ops;
+
+		ret = isa_dma_add(i, &iomd_dma[i].dma);
+		if (ret)
+			printk("IOMDDMA%u: unable to register: %d\n", i, ret);
+	}
+
+	ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
+	if (ret)
+		printk("IOMDFLOPPY: unable to register: %d\n", ret);
+	ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
+	if (ret)
+		printk("IOMDSOUND: unable to register: %d\n", ret);
+	return 0;
 }
+core_initcall(rpc_dma_init);
diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h
index bad72054858..67bfc6719c3 100644
--- a/arch/arm/mach-rpc/include/mach/isa-dma.h
+++ b/arch/arm/mach-rpc/include/mach/isa-dma.h
@@ -23,5 +23,7 @@
 
 #define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
 
+#define IOMD_DMA_BOUNDARY	(PAGE_SIZE - 1)
+
 #endif /* _ASM_ARCH_DMA_H */
 
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
index bd7268ba17e..45c7b935dc4 100644
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -16,7 +16,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	iomd_writeb(0, IOMD_ROMCR0);
 
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index 7613d0a384b..b8687f71c30 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -22,7 +22,7 @@
 extern void (*s3c24xx_reset_hook)(void);
 
 static void
-arch_reset(char mode)
+arch_reset(char mode, const char *cmd)
 {
 	struct clk *wdtclk;
 
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 652bbc403f0..090cfd969bc 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -16,7 +16,7 @@ static void arch_idle(void)
 	/* nothing here yet */
 }
 
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
 {
 	/* nothing here yet */
 }
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index f99d9013905..81ffff7ed49 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -71,19 +71,9 @@ config SA1100_H3600
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
 	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
-config SA1100_H3800
-	bool "Compaq iPAQ H3800"
-	help
-	  Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
-	  series handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
-
 config SA1100_H3XXX
 	bool
-	depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
+	depends on SA1100_H3100 || SA1100_H3600
 	default y
 
 config SA1100_BADGE4
@@ -157,15 +147,6 @@ config SA1100_SSP
 	  This isn't for audio support, but for attached sensors and
 	  other devices, eg for BadgePAD 4 sensor support.
 
-config H3600_SLEEVE
-	tristate "Compaq iPAQ Handheld sleeve support"
-	depends on SA1100_H3100 || SA1100_H3600
-	help
-	  Choose this option to enable support for extension packs (sleeves)
-	  for the Compaq iPAQ H3XXX series of handheld computers.  This option
-	  is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension
-	  packs.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2052eb88c96..bbf2ebcc306 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -145,7 +146,8 @@ static struct locomo_driver collie_uart_driver = {
 	.remove	= collie_uart_remove,
 };
 
-static int __init collie_uart_init(void) {
+static int __init collie_uart_init(void)
+{
 	return locomo_driver_register(&collie_uart_driver);
 }
 device_initcall(collie_uart_init);
@@ -195,18 +197,34 @@ static struct mtd_partition collie_partitions[] = {
 	}
 };
 
+static int collie_flash_init(void)
+{
+	int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
+	if (rc)
+		return rc;
+
+	rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
+	if (rc)
+		gpio_free(COLLIE_GPIO_VPEN);
+
+	return rc;
+}
+
 static void collie_set_vpp(int vpp)
 {
-	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
-	if (vpp)
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
-	else
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+	gpio_set_value(COLLIE_GPIO_VPEN, vpp);
+}
+
+static void collie_flash_exit(void)
+{
+	gpio_free(COLLIE_GPIO_VPEN);
 }
 
 static struct flash_platform_data collie_flash_data = {
 	.map_name	= "cfi_probe",
+	.init		= collie_flash_init,
 	.set_vpp	= collie_set_vpp,
+	.exit		= collie_flash_exit,
 	.parts		= collie_partitions,
 	.nr_parts	= ARRAY_SIZE(collie_partitions),
 };
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index b39307f26b5..444f266ecc0 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -58,6 +59,9 @@ static void collie_charger_init(void)
 		return;
 	}
 
+	gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
+	gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
+
 	ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
 			           COLLIE_TC35143_GPIO_BBAT_ON);
 	return;
@@ -73,17 +77,11 @@ static void collie_measure_temp(int on)
 
 static void collie_charge(int on)
 {
-	extern struct platform_device colliescoop_device;
-
 	/* Zaurus seems to contain LTC1731; it should know when to
 	 * stop charging itself, so setting charge on should be
 	 * relatively harmless (as long as it is not done too often).
 	 */
-	if (on) {
-		set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
-	} else {
-		reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
-	}
+	gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
 }
 
 static void collie_discharge(int on)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index af25a78d705..0eb2f159578 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -42,19 +42,12 @@
 #include <asm/mach/serial_sa1100.h>
 
 #include <mach/h3600.h>
-
-#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
 #include <mach/h3600_gpio.h>
-#endif
-
-#ifdef CONFIG_SA1100_H3800
-#include <mach/h3600_asic.h>
-#endif
 
 #include "generic.h"
 
-struct ipaq_model_ops ipaq_model_ops;
-EXPORT_SYMBOL(ipaq_model_ops);
+void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
+EXPORT_SYMBOL(assign_h3600_egpio);
 
 static struct mtd_partition h3xxx_partitions[] = {
 	{
@@ -63,41 +56,9 @@ static struct mtd_partition h3xxx_partitions[] = {
 		.offset		= 0,
 		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
 	}, {
-#ifdef CONFIG_MTD_2PARTS_IPAQ
-		.name		= "H3XXX root jffs2",
+		.name		= "H3XXX rootfs",
 		.size		= MTDPART_SIZ_FULL,
 		.offset		= 0x00040000,
-#else
-		.name		= "H3XXX kernel",
-		.size		= 0x00080000,
-		.offset		= 0x00040000,
-	}, {
-		.name		= "H3XXX params",
-		.size		= 0x00040000,
-		.offset		= 0x000C0000,
-	}, {
-#ifdef CONFIG_JFFS2_FS
-		.name		= "H3XXX root jffs2",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00100000,
-#else
-		.name		= "H3XXX initrd",
-		.size		= 0x00100000,
-		.offset		= 0x00100000,
-	}, {
-		.name		= "H3XXX root cramfs",
-		.size		= 0x00300000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "H3XXX usr cramfs",
-		.size		= 0x00800000,
-		.offset		= 0x00500000,
-	}, {
-		.name		= "H3XXX usr local",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00d00000,
-#endif
-#endif
 	}
 };
 
@@ -131,11 +92,7 @@ static int h3600_irda_set_power(struct device *dev, unsigned int state)
 
 static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
 {
-	if (speed < 4000000) {
-		clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
-	} else {
-		set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
-	}
+	assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
 }
 
 static struct irda_platform_data h3600_irda_data = {
@@ -266,12 +223,6 @@ static void __init h3xxx_map_io(void)
 	sa1100fb_lcd_power = h3xxx_lcd_power;
 }
 
-static __inline__ void do_blank(int setp)
-{
-	if (ipaq_model_ops.blank_callback)
-		ipaq_model_ops.blank_callback(1-setp);
-}
-
 /************************* H3100 *************************/
 
 #ifdef CONFIG_SA1100_H3100
@@ -289,7 +240,6 @@ static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
 	case IPAQ_EGPIO_LCD_POWER:
 		egpio |= EGPIO_H3600_LCD_ON;
 		gpio  |= GPIO_H3100_LCD_3V_ON;
-		do_blank(setp);
 		break;
 	case IPAQ_EGPIO_LCD_ENABLE:
 		break;
@@ -343,25 +293,6 @@ static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
 	}
 }
 
-static unsigned long h3100_read_egpio(void)
-{
-	return h3100_egpio;
-}
-
-static int h3100_pm_callback(int req)
-{
-	if (ipaq_model_ops.pm_callback_aux)
-		return ipaq_model_ops.pm_callback_aux(req);
-	return 0;
-}
-
-static struct ipaq_model_ops h3100_model_ops __initdata = {
-	.generic_name	= "3100",
-	.control	= h3100_control_egpio,
-	.read		= h3100_read_egpio,
-	.pm_callback	= h3100_pm_callback
-};
-
 #define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON	  \
 			  | GPIO_H3100_GPIO3	  \
 			  | GPIO_H3100_QMUTE	  \
@@ -387,7 +318,7 @@ static void __init h3100_map_io(void)
 	GAFR &= ~H3100_DIRECT_EGPIO;
 
 	H3100_EGPIO = h3100_egpio;
-	ipaq_model_ops = h3100_model_ops;
+	assign_h3600_egpio = h3100_control_egpio;
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
@@ -420,7 +351,6 @@ static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
 			 EGPIO_H3600_LCD_PCI |
 			 EGPIO_H3600_LCD_5V_ON |
 			 EGPIO_H3600_LVDD_ON;
-		do_blank(setp);
 		break;
 	case IPAQ_EGPIO_LCD_ENABLE:
 		break;
@@ -471,25 +401,6 @@ static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
 	}
 }
 
-static unsigned long h3600_read_egpio(void)
-{
-	return h3600_egpio;
-}
-
-static int h3600_pm_callback(int req)
-{
-	if (ipaq_model_ops.pm_callback_aux)
-		return ipaq_model_ops.pm_callback_aux(req);
-	return 0;
-}
-
-static struct ipaq_model_ops h3600_model_ops __initdata = {
-	.generic_name	= "3600",
-	.control	= h3600_control_egpio,
-	.read		= h3600_read_egpio,
-	.pm_callback	= h3600_pm_callback
-};
-
 static void __init h3600_map_io(void)
 {
 	h3xxx_map_io();
@@ -504,7 +415,7 @@ static void __init h3600_map_io(void)
 	       GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
 
 	H3600_EGPIO = h3600_egpio;	   /* Maintains across sleep? */
-	ipaq_model_ops = h3600_model_ops;
+	assign_h3600_egpio = h3600_control_egpio;
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
@@ -519,388 +430,3 @@ MACHINE_END
 
 #endif /* CONFIG_SA1100_H3600 */
 
-#ifdef CONFIG_SA1100_H3800
-
-#define SET_ASIC1(x) \
-   do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
-
-#define SET_ASIC2(x) \
-   do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
-
-#define CLEAR_ASIC1(x) \
-   do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
-
-#define CLEAR_ASIC2(x) \
-   do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
-
-
-/*
-  On screen enable, we get
-
-     h3800_video_power_on(1)
-     LCD controller starts
-     h3800_video_lcd_enable(1)
-
-  On screen disable, we get
-
-     h3800_video_lcd_enable(0)
-     LCD controller stops
-     h3800_video_power_on(0)
-*/
-
-
-static void h3800_video_power_on(int setp)
-{
-	if (setp) {
-		H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
-		msleep(30);
-		H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
-		msleep(5);
-		H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
-		msleep(50);
-		H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
-		msleep(5);
-	} else {
-		msleep(5);
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
-		msleep(50);
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
-		msleep(5);
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
-		msleep(100);
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
-	}
-}
-
-static void h3800_video_lcd_enable(int setp)
-{
-	if (setp) {
-		msleep(17);	// Wait one from before turning on
-		H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
-	} else {
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
-		msleep(30);	// Wait before turning off
-	}
-}
-
-
-static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		h3800_video_power_on(setp);
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		h3800_video_lcd_enable(setp);
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-	case IPAQ_EGPIO_AUDIO_ON:
-	case IPAQ_EGPIO_QMUTE:
-		printk("%s: error - should not be called\n", __func__);
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		SET_ASIC2(GPIO2_OPT_ON_NVRAM);
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		SET_ASIC2(GPIO2_OPT_ON);
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		SET_ASIC2(GPIO2_OPT_PCM_RESET);
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		SET_ASIC2(GPIO2_OPT_RESET);
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		CLEAR_ASIC1(GPIO1_IR_ON_N);
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		SET_ASIC1(GPIO1_RS232_ON);
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		H3800_ASIC2_FlashWP_VPP_ON = setp;
-		break;
-	}
-}
-
-static unsigned long h3800_read_egpio(void)
-{
-	return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
-}
-
-/* We need to fix ASIC2 GPIO over suspend/resume.  At the moment,
-   it doesn't appear that ASIC1 GPIO has the same problem */
-
-static int h3800_pm_callback(int req)
-{
-	static u16 asic1_data;
-	static u16 asic2_data;
-	int result = 0;
-
-	printk("%s %d\n", __func__, req);
-
-	switch (req) {
-	case PM_RESUME:
-		MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;  /* Set MSC2 correctly */
-
-		H3800_ASIC2_GPIOPIOD = asic2_data;
-		H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
-			| GPIO2_SD_DETECT
-			| GPIO2_EAR_IN_N
-			| GPIO2_USB_DETECT_N
-			| GPIO2_SD_CON_SLT;
-
-		H3800_ASIC1_GPIO_OUT = asic1_data;
-
-		if (ipaq_model_ops.pm_callback_aux)
-			result = ipaq_model_ops.pm_callback_aux(req);
-		break;
-
-	case PM_SUSPEND:
-		if (ipaq_model_ops.pm_callback_aux &&
-		     ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
-			return result;
-
-		asic1_data = H3800_ASIC1_GPIO_OUT;
-		asic2_data = H3800_ASIC2_GPIOPIOD;
-		break;
-	default:
-		printk("%s: unrecognized PM callback\n", __func__);
-		break;
-	}
-	return result;
-}
-
-static struct ipaq_model_ops h3800_model_ops __initdata = {
-	.generic_name	= "3800",
-	.control	= h3800_control_egpio,
-	.read		= h3800_read_egpio,
-	.pm_callback	= h3800_pm_callback
-};
-
-#define MAX_ASIC_ISR_LOOPS    20
-
-/* The order of these is important - see #include <mach/irqs.h> */
-static u32 kpio_irq_mask[] = {
-	KPIO_KEY_ALL,
-	KPIO_SPI_INT,
-	KPIO_OWM_INT,
-	KPIO_ADC_INT,
-	KPIO_UART_0_INT,
-	KPIO_UART_1_INT,
-	KPIO_TIMER_0_INT,
-	KPIO_TIMER_1_INT,
-	KPIO_TIMER_2_INT
-};
-
-static u32 gpio_irq_mask[] = {
-	GPIO2_PEN_IRQ,
-	GPIO2_SD_DETECT,
-	GPIO2_EAR_IN_N,
-	GPIO2_USB_DETECT_N,
-	GPIO2_SD_CON_SLT,
-};
-
-static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
-{
-	int i;
-
-	if (0) printk("%s: interrupt received\n", __func__);
-
-	desc->chip->ack(irq);
-
-	for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
-		u32 irq;
-		int j;
-
-		/* KPIO */
-		irq = H3800_ASIC2_KPIINTFLAG;
-		if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
-		for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
-			if (irq & kpio_irq_mask[j])
-				handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
-
-		/* GPIO2 */
-		irq = H3800_ASIC2_GPIINTFLAG;
-		if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
-		for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
-			if (irq & gpio_irq_mask[j])
-				handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
-	}
-
-	if (i >= MAX_ASIC_ISR_LOOPS)
-		printk("%s: interrupt processing overrun\n", __func__);
-
-	/* For level-based interrupts */
-	desc->chip->unmask(irq);
-
-}
-
-static struct irqaction h3800_irq = {
-	.name		= "h3800_asic",
-	.handler	= h3800_IRQ_demux,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-u32 kpio_int_shadow = 0;
-
-
-/* mask_ack <- IRQ is first serviced.
-       mask <- IRQ is disabled.
-     unmask <- IRQ is enabled
-
-     The INTCLR registers are poorly documented.  I believe that writing
-     a "1" to the register clears the specific interrupt, but the documentation
-     indicates writing a "0" clears the interrupt.  In any case, they shouldn't
-     be read (that's the INTFLAG register)
- */
-
-static void h3800_mask_ack_kpio_irq(unsigned int irq)
-{
-	u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
-	kpio_int_shadow &= ~mask;
-	H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-	H3800_ASIC2_KPIINTCLR  = mask;
-}
-
-static void h3800_mask_kpio_irq(unsigned int irq)
-{
-	u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
-	kpio_int_shadow &= ~mask;
-	H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_unmask_kpio_irq(unsigned int irq)
-{
-	u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
-	kpio_int_shadow |= mask;
-	H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_mask_ack_gpio_irq(unsigned int irq)
-{
-	u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
-	H3800_ASIC2_GPIINTSTAT &= ~mask;
-	H3800_ASIC2_GPIINTCLR	= mask;
-}
-
-static void h3800_mask_gpio_irq(unsigned int irq)
-{
-	u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
-	H3800_ASIC2_GPIINTSTAT &= ~mask;
-	}
-
-static void h3800_unmask_gpio_irq(unsigned int irq)
-{
-	u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
-	H3800_ASIC2_GPIINTSTAT |= mask;
-}
-
-static void __init h3800_init_irq(void)
-{
-	int i;
-
-	/* Initialize standard IRQs */
-	sa1100_init_irq();
-
-	/* Disable all IRQs and set up clock */
-	H3800_ASIC2_KPIINTSTAT	   =  0;     /* Disable all interrupts */
-	H3800_ASIC2_GPIINTSTAT	   =  0;
-
-	H3800_ASIC2_KPIINTCLR	   =  0;     /* Clear all KPIO interrupts */
-	H3800_ASIC2_GPIINTCLR	   =  0;     /* Clear all GPIO interrupts */
-
-//	H3800_ASIC2_KPIINTCLR	   =  0xffff;	  /* Clear all KPIO interrupts */
-//	H3800_ASIC2_GPIINTCLR	   =  0xffff;	  /* Clear all GPIO interrupts */
-
-	H3800_ASIC2_CLOCK_Enable       |= ASIC2_CLOCK_EX0;   /* 32 kHZ crystal on */
-	H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
-	H3800_ASIC2_INTR_ClockPrescale	= ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
-	H3800_ASIC2_INTR_TimerSet	= 1;
-
-#if 0
-	for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
-		int irq = i + H3800_KPIO_IRQ_START;
-		irq_desc[irq].valid    = 1;
-		irq_desc[irq].probe_ok = 1;
-		set_irq_chip(irq, &h3800_kpio_irqchip);
-	}
-
-	for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
-		int irq = i + H3800_GPIO_IRQ_START;
-		irq_desc[irq].valid    = 1;
-		irq_desc[irq].probe_ok = 1;
-		set_irq_chip(irq, &h3800_gpio_irqchip);
-	}
-#endif
-	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
-	set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
-}
-
-
-#define ASIC1_OUTPUTS	 0x7fff   /* First 15 bits are used */
-
-static void __init h3800_map_io(void)
-{
-	h3xxx_map_io();
-
-	/* Add wakeup on AC plug/unplug */
-	PWER  |= PWER_GPIO12;
-
-	/* Initialize h3800-specific values here */
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GAFR =	GPIO_H3800_CLK_OUT |
-		GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
-		GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
-	GPDR =	GPIO_H3800_CLK_OUT |
-		GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-		GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-		GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
-		GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
-	TUCR =	TUCR_3_6864MHz;   /* Seems to be used only for the Bluetooth UART */
-
-	/* Fix the memory bus */
-	MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
-
-	/* Set up ASIC #1 */
-	H3800_ASIC1_GPIO_DIR		= ASIC1_OUTPUTS;	    /* All outputs */
-	H3800_ASIC1_GPIO_MASK		= ASIC1_OUTPUTS;	    /* No interrupts */
-	H3800_ASIC1_GPIO_SLEEP_MASK	= ASIC1_OUTPUTS;
-	H3800_ASIC1_GPIO_SLEEP_DIR	= ASIC1_OUTPUTS;
-	H3800_ASIC1_GPIO_SLEEP_OUT	= GPIO1_EAR_ON_N;
-	H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
-	H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
-
-	H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
-				      | GPIO1_RS232_ON
-				      | GPIO1_EAR_ON_N;
-
-	/* Set up ASIC #2 */
-	H3800_ASIC2_GPIOPIOD	= GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
-	H3800_ASIC2_GPOBFSTAT	= GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
-
-	H3800_ASIC2_GPIODIR	= GPIO2_PEN_IRQ
-				      | GPIO2_SD_DETECT
-				      | GPIO2_EAR_IN_N
-				      | GPIO2_USB_DETECT_N
-				      | GPIO2_SD_CON_SLT;
-
-	/* TODO : Set sleep states & battery fault states */
-
-	/* Clear VPP Enable */
-	H3800_ASIC2_FlashWP_VPP_ON = 0;
-	ipaq_model_ops = h3800_model_ops;
-}
-
-MACHINE_START(H3800, "Compaq iPAQ H3800")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
-	.map_io		= h3800_map_io,
-	.init_irq	= h3800_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3800 */
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 69e962416e3..9efb569cdb6 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -14,21 +14,21 @@
 #define __ASM_ARCH_COLLIE_H
 
 
-#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
+#define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
+#define COLLIE_GPIO_CHARGE_ON	(COLLIE_SCOOP_GPIO_BASE + 0)
 #define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
 #define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
 #define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
 #define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
 #define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
 #define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
-#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
+#define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
 #define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
 
-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
-				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
 				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
-				COLLIE_SCP_CHARGE_ON )
+#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
 
 /* GPIOs for which the generic definition doesn't say much */
 
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 9cc47fddb33..2827faa4742 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -29,7 +29,7 @@ typedef int __bitwise pm_request_t;
 #define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
 
 /* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
 
 /* Physical memory regions corresponding to chip selects */
 #define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
@@ -93,76 +93,7 @@ enum ipaq_egpio_type {
 	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
 };
 
-struct ipaq_model_ops {
-	const char     *generic_name;
-	void	      (*control)(enum ipaq_egpio_type, int);
-	unsigned long (*read)(void);
-	void	      (*blank_callback)(int blank);
-	int	      (*pm_callback)(int req);	    /* Primary model callback */
-	int	      (*pm_callback_aux)(int req);  /* Secondary callback (used by HAL modules) */
-};
-
-extern struct ipaq_model_ops ipaq_model_ops;
-
-static __inline__ const char * h3600_generic_name(void)
-{
-	return ipaq_model_ops.generic_name;
-}
-
-static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,level);
-}
-
-static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,0);
-}
-
-static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,1);
-}
-
-static __inline__ unsigned long read_h3600_egpio(void)
-{
-	if (ipaq_model_ops.read)
-		return ipaq_model_ops.read();
-	return 0;
-}
-
-static __inline__ int  h3600_register_blank_callback(void (*f)(int))
-{
-	ipaq_model_ops.blank_callback = f;
-	return 0;
-}
-
-static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
-{
-	ipaq_model_ops.blank_callback = NULL;
-}
-
-
-static __inline__ int  h3600_register_pm_callback(int (*f)(int))
-{
-	ipaq_model_ops.pm_callback_aux = f;
-	return 0;
-}
-
-static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
-{
-	ipaq_model_ops.pm_callback_aux = NULL;
-}
-
-static __inline__ int h3600_power_management(int req)
-{
-	if (ipaq_model_ops.pm_callback)
-		return ipaq_model_ops.pm_callback(req);
-	return 0;
-}
+extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
 
 #endif /* ASSEMBLY */
 
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
index 62b0b787968..a36ca76d018 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -48,22 +48,11 @@
 #define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
 #define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
 
-/* H3800 specific pins */
-#define GPIO_H3800_AC_IN                GPIO_GPIO (12)
-#define GPIO_H3800_COM_DSR              GPIO_GPIO (13)
-#define GPIO_H3800_MMC_INT              GPIO_GPIO (18)
-#define GPIO_H3800_NOPT_IND             GPIO_GPIO (20)   /* Almost exactly the same as GPIO_H3600_OPT_DET */
-#define GPIO_H3800_OPT_BAT_FAULT        GPIO_GPIO (22)
-#define GPIO_H3800_CLK_OUT              GPIO_GPIO (27)
-
 /****************************************************/
 
 #define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
 #define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
 
-#define IRQ_GPIO_H3800_MMC_INT          IRQ_GPIO18
-#define IRQ_GPIO_H3800_NOPT_IND         IRQ_GPIO20 /* almost same as OPT_DET */
-
 /* H3100 / 3600 EGPIO pins */
 #define EGPIO_H3600_VPP_ON		(1 << 0)
 #define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
@@ -84,457 +73,5 @@
 #define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
 #define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
 
-/********************* H3800, ASIC #2 ********************/
-
-#define _H3800_ASIC2_Base            (H3600_EGPIO_VIRT)
-#define H3800_ASIC2_OFFSET(s,x,y)    \
-    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-#define H3800_ASIC2_NOFFSET(s,x,n,y) \
-    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-
-#define _H3800_ASIC2_GPIO_Base                 0x0000
-#define _H3800_ASIC2_GPIO_Direction            0x0000    /* R/W, 16 bits 1:input, 0:output */
-#define _H3800_ASIC2_GPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
-#define _H3800_ASIC2_GPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_GPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
-#define _H3800_ASIC2_GPIO_InterruptClear       0x0010    /* W,   12 bits */
-#define _H3800_ASIC2_GPIO_InterruptFlag        0x0010    /* R,   12 bits - reads int status */
-#define _H3800_ASIC2_GPIO_Data                 0x0014    /* R/W, 16 bits */
-#define _H3800_ASIC2_GPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_GPIO_InterruptEnable      0x001c    /* R/W, 12 bits 1:enable interrupt */
-#define _H3800_ASIC2_GPIO_Alternate            0x003c    /* R/W, 12+1 bits - set alternate functions */
-
-#define H3800_ASIC2_GPIO_Direction          H3800_ASIC2_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC2_GPIO_InterruptType      H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
-#define H3800_ASIC2_GPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
-#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
-#define H3800_ASIC2_GPIO_InterruptClear     H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
-#define H3800_ASIC2_GPIO_InterruptFlag      H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
-#define H3800_ASIC2_GPIO_Data               H3800_ASIC2_OFFSET( u16, GPIO, Data )
-#define H3800_ASIC2_GPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
-#define H3800_ASIC2_GPIO_InterruptEnable    H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
-#define H3800_ASIC2_GPIO_Alternate          H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
-
-#define GPIO_H3800_ASIC2_IN_Y1_N          (1 << 0)   /* Output: Touchscreen Y1 */
-#define GPIO_H3800_ASIC2_IN_X0            (1 << 1)   /* Output: Touchscreen X0 */
-#define GPIO_H3800_ASIC2_IN_Y0            (1 << 2)   /* Output: Touchscreen Y0 */
-#define GPIO_H3800_ASIC2_IN_X1_N          (1 << 3)   /* Output: Touchscreen X1 */
-#define GPIO_H3800_ASIC2_BT_RST           (1 << 4)   /* Output: Bluetooth reset */
-#define GPIO_H3800_ASIC2_PEN_IRQ          (1 << 5)   /* Input : Pen down        */
-#define GPIO_H3800_ASIC2_SD_DETECT        (1 << 6)   /* Input : SD detect */
-#define GPIO_H3800_ASIC2_EAR_IN_N         (1 << 7)   /* Input : Audio jack plug inserted */
-#define GPIO_H3800_ASIC2_OPT_PCM_RESET    (1 << 8)   /* Output: */
-#define GPIO_H3800_ASIC2_OPT_RESET        (1 << 9)   /* Output: */
-#define GPIO_H3800_ASIC2_USB_DETECT_N     (1 << 10)  /* Input : */
-#define GPIO_H3800_ASIC2_SD_CON_SLT       (1 << 11)  /* Input : */
-
-#define _H3800_ASIC2_KPIO_Base                 0x0200
-#define _H3800_ASIC2_KPIO_Direction            0x0000    /* R/W, 12 bits 1:input, 0:output */
-#define _H3800_ASIC2_KPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
-#define _H3800_ASIC2_KPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_KPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
-#define _H3800_ASIC2_KPIO_InterruptClear       0x0010    /* W,   20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_InterruptFlag        0x0010    /* R,   20 bits - 8 special - reads int status */
-#define _H3800_ASIC2_KPIO_Data                 0x0014    /* R/W, 16 bits */
-#define _H3800_ASIC2_KPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_KPIO_InterruptEnable      0x001c    /* R/W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_Alternate            0x003c    /* R/W, 6 bits */
-
-#define H3800_ASIC2_KPIO_Direction          H3800_ASIC2_OFFSET( u16, KPIO, Direction )
-#define H3800_ASIC2_KPIO_InterruptType      H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
-#define H3800_ASIC2_KPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
-#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
-#define H3800_ASIC2_KPIO_InterruptClear     H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
-#define H3800_ASIC2_KPIO_InterruptFlag      H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
-#define H3800_ASIC2_KPIO_Data               H3800_ASIC2_OFFSET( u16, KPIO, Data )
-#define H3800_ASIC2_KPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
-#define H3800_ASIC2_KPIO_InterruptEnable    H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
-#define H3800_ASIC2_KPIO_Alternate          H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
-
-#define H3800_ASIC2_KPIO_SPI_INT        ( 1 << 16 )
-#define H3800_ASIC2_KPIO_OWM_INT        ( 1 << 17 )
-#define H3800_ASIC2_KPIO_ADC_INT        ( 1 << 18 )
-#define H3800_ASIC2_KPIO_UART_0_INT     ( 1 << 19 )
-#define H3800_ASIC2_KPIO_UART_1_INT     ( 1 << 20 )
-#define H3800_ASIC2_KPIO_TIMER_0_INT    ( 1 << 21 )
-#define H3800_ASIC2_KPIO_TIMER_1_INT    ( 1 << 22 )
-#define H3800_ASIC2_KPIO_TIMER_2_INT    ( 1 << 23 )
-
-#define KPIO_H3800_ASIC2_RECORD_BTN_N     (1 << 0)   /* Record button */
-#define KPIO_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Keypad */
-#define KPIO_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* */
-#define KPIO_H3800_ASIC2_KEY_LEFT_N       (1 << 6)   /* */
-#define KPIO_H3800_ASIC2_KEY_RIGHT_N      (1 << 7)   /* */
-#define KPIO_H3800_ASIC2_KEY_AP1_N        (1 << 8)   /* Old "Calendar" */
-#define KPIO_H3800_ASIC2_KEY_AP2_N        (1 << 9)   /* Old "Schedule" */
-#define KPIO_H3800_ASIC2_KEY_AP3_N        (1 << 10)  /* Old "Q"        */
-#define KPIO_H3800_ASIC2_KEY_AP4_N        (1 << 11)  /* Old "Undo"     */
-
-/* Alternate KPIO functions (set by default) */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Action key */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* J1 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* J2 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* J3 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* J4 of keypad input */
-
-#define _H3800_ASIC2_SPI_Base                  0x0400
-#define _H3800_ASIC2_SPI_Control               0x0000    /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_Data                  0x0004    /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_ChipSelectDisabled    0x0008    /* W   8 bits */
-
-#define H3800_ASIC2_SPI_Control             H3800_ASIC2_OFFSET( u8, SPI, Control )
-#define H3800_ASIC2_SPI_Data                H3800_ASIC2_OFFSET( u8, SPI, Data )
-#define H3800_ASIC2_SPI_ChipSelectDisabled  H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
-
-#define _H3800_ASIC2_PWM_0_Base                0x0600
-#define _H3800_ASIC2_PWM_1_Base                0x0700
-#define _H3800_ASIC2_PWM_TimeBase              0x0000    /* R/W 6 bits */
-#define _H3800_ASIC2_PWM_PeriodTime            0x0004    /* R/W 12 bits */
-#define _H3800_ASIC2_PWM_DutyTime              0x0008    /* R/W 12 bits */
-
-#define H3800_ASIC2_PWM_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 0, TimeBase )
-#define H3800_ASIC2_PWM_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
-#define H3800_ASIC2_PWM_0_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
-
-#define H3800_ASIC2_PWM_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 1, TimeBase )
-#define H3800_ASIC2_PWM_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
-#define H3800_ASIC2_PWM_1_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
-
-#define H3800_ASIC2_PWM_TIMEBASE_MASK             0xf    /* Low 4 bits sets time base, max = 8 */
-#define H3800_ASIC2_PWM_TIMEBASE_ENABLE    ( 1 << 4 )    /* Enable clock */
-#define H3800_ASIC2_PWM_TIMEBASE_CLEAR     ( 1 << 5 )    /* Clear the PWM */
-
-#define _H3800_ASIC2_LED_0_Base                0x0800
-#define _H3800_ASIC2_LED_1_Base                0x0880
-#define _H3800_ASIC2_LED_2_Base                0x0900
-#define _H3800_ASIC2_LED_TimeBase              0x0000    /* R/W  7 bits */
-#define _H3800_ASIC2_LED_PeriodTime            0x0004    /* R/W 12 bits */
-#define _H3800_ASIC2_LED_DutyTime              0x0008    /* R/W 12 bits */
-#define _H3800_ASIC2_LED_AutoStopCount         0x000c    /* R/W 16 bits */
-
-#define H3800_ASIC2_LED_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 0, TimeBase )
-#define H3800_ASIC2_LED_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
-#define H3800_ASIC2_LED_0_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
-#define H3800_ASIC2_LED_0_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
-
-#define H3800_ASIC2_LED_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 1, TimeBase )
-#define H3800_ASIC2_LED_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
-#define H3800_ASIC2_LED_1_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
-#define H3800_ASIC2_LED_1_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
-
-#define H3800_ASIC2_LED_2_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 2, TimeBase )
-#define H3800_ASIC2_LED_2_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
-#define H3800_ASIC2_LED_2_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
-#define H3800_ASIC2_LED_2_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
-
-#define H3800_ASIC2_LED_TIMEBASE_MASK            0x0f    /* Low 4 bits sets time base, max = 13 */
-#define H3800_ASIC2_LED_TIMEBASE_BLINK     ( 1 << 4 )    /* Enable blinking */
-#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP  ( 1 << 5 )
-#define H3800_ASIC2_LED_TIMEBASE_ALWAYS    ( 1 << 6 )    /* Enable blink always */
-
-#define _H3800_ASIC2_UART_0_Base               0x0A00
-#define _H3800_ASIC2_UART_1_Base               0x0C00
-#define _H3800_ASIC2_UART_Receive              0x0000    /* R    8 bits */
-#define _H3800_ASIC2_UART_Transmit             0x0000    /*   W  8 bits */
-#define _H3800_ASIC2_UART_IntEnable            0x0004    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_IntVerify            0x0008    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_FIFOControl          0x000c    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_LineControl          0x0010    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_ModemStatus          0x0014    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_LineStatus           0x0018    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_ScratchPad           0x001c    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchL        0x0020    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchH        0x0024    /* R/W  8 bits */
-
-#define H3800_ASIC2_UART_0_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 0, Receive )
-#define H3800_ASIC2_UART_0_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 0, Transmit )
-#define H3800_ASIC2_UART_0_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntEnable )
-#define H3800_ASIC2_UART_0_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntVerify )
-#define H3800_ASIC2_UART_0_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, FIFOControl )
-#define H3800_ASIC2_UART_0_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, LineControl )
-#define H3800_ASIC2_UART_0_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 0, ModemStatus )
-#define H3800_ASIC2_UART_0_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 0, LineStatus )
-#define H3800_ASIC2_UART_0_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 0, ScratchPad )
-#define H3800_ASIC2_UART_0_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchL )
-#define H3800_ASIC2_UART_0_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchH )
-
-#define H3800_ASIC2_UART_1_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 1, Receive )
-#define H3800_ASIC2_UART_1_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 1, Transmit )
-#define H3800_ASIC2_UART_1_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntEnable )
-#define H3800_ASIC2_UART_1_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntVerify )
-#define H3800_ASIC2_UART_1_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, FIFOControl )
-#define H3800_ASIC2_UART_1_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, LineControl )
-#define H3800_ASIC2_UART_1_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 1, ModemStatus )
-#define H3800_ASIC2_UART_1_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 1, LineStatus )
-#define H3800_ASIC2_UART_1_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 1, ScratchPad )
-#define H3800_ASIC2_UART_1_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchL )
-#define H3800_ASIC2_UART_1_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchH )
-
-#define _H3800_ASIC2_TIMER_Base                0x0E00
-#define _H3800_ASIC2_TIMER_Command             0x0000    /* R/W  8 bits */
-
-#define H3800_ASIC2_TIMER_Command           H3800_ASIC2_OFFSET( u8, Timer, Command )
-
-#define H3800_ASIC2_TIMER_GAT_0            ( 1 << 0 )    /* Gate enable, counter 0 */
-#define H3800_ASIC2_TIMER_GAT_1            ( 1 << 1 )    /* Gate enable, counter 1 */
-#define H3800_ASIC2_TIMER_GAT_2            ( 1 << 2 )    /* Gate enable, counter 2 */
-#define H3800_ASIC2_TIMER_CLK_0            ( 1 << 3 )    /* Clock enable, counter 0 */
-#define H3800_ASIC2_TIMER_CLK_1            ( 1 << 4 )    /* Clock enable, counter 1 */
-#define H3800_ASIC2_TIMER_CLK_2            ( 1 << 5 )    /* Clock enable, counter 2 */
-#define H3800_ASIC2_TIMER_MODE_0           ( 1 << 6 )    /* Mode 0 enable, counter 0 */
-#define H3800_ASIC2_TIMER_MODE_1           ( 1 << 7 )    /* Mode 0 enable, counter 1 */
-
-#define _H3800_ASIC2_CLOCK_Base                0x1000
-#define _H3800_ASIC2_CLOCK_Enable              0x0000    /* R/W  18 bits */
-
-#define H3800_ASIC2_CLOCK_Enable            H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
-
-#define H3800_ASIC2_CLOCK_AUDIO_1              0x0001    /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_2              0x0002    /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_3              0x0004    /* Enable 5.6 MHz clock for 11 kHZ sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_4              0x0008    /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
-#define H3800_ASIC2_CLOCK_ADC              ( 1 << 4 )    /* 1.024 MHz clock to ADC */
-#define H3800_ASIC2_CLOCK_SPI              ( 1 << 5 )    /* 4.096 MHz clock to SPI */
-#define H3800_ASIC2_CLOCK_OWM              ( 1 << 6 )    /* 4.096 MHz clock to OWM */
-#define H3800_ASIC2_CLOCK_PWM              ( 1 << 7 )    /* 2.048 MHz clock to PWM */
-#define H3800_ASIC2_CLOCK_UART_1           ( 1 << 8 )    /* 24.576 MHz clock to UART1 (turn off bit 16) */
-#define H3800_ASIC2_CLOCK_UART_0           ( 1 << 9 )    /* 24.576 MHz clock to UART0 (turn off bit 17) */
-#define H3800_ASIC2_CLOCK_SD_1             ( 1 << 10 )   /* 16.934 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_2             ( 2 << 10 )   /* 24.576 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_3             ( 3 << 10 )   /* 33.869 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_4             ( 4 << 10 )   /* 49.152 MHz to SD */
-#define H3800_ASIC2_CLOCK_EX0              ( 1 << 13 )   /* Enable 32.768 kHz crystal */
-#define H3800_ASIC2_CLOCK_EX1              ( 1 << 14 )   /* Enable 24.576 MHz crystal */
-#define H3800_ASIC2_CLOCK_EX2              ( 1 << 15 )   /* Enable 33.869 MHz crystal */
-#define H3800_ASIC2_CLOCK_SLOW_UART_1      ( 1 << 16 )   /* Enable 3.686 MHz to UART1 (turn off bit 8) */
-#define H3800_ASIC2_CLOCK_SLOW_UART_0      ( 1 << 17 )   /* Enable 3.686 MHz to UART0 (turn off bit 9) */
-
-#define _H3800_ASIC2_ADC_Base                  0x1200
-#define _H3800_ASIC2_ADC_Multiplexer           0x0000    /* R/W 4 bits - low 3 bits set channel */
-#define _H3800_ASIC2_ADC_ControlStatus         0x0004    /* R/W 8 bits */
-#define _H3800_ASIC2_ADC_Data                  0x0008    /* R   10 bits */
-
-#define H3800_ASIC2_ADC_Multiplexer       H3800_ASIC2_OFFSET(  u8, ADC, Multiplexer )
-#define H3800_ASIC2_ADC_ControlStatus     H3800_ASIC2_OFFSET(  u8, ADC, ControlStatus )
-#define H3800_ASIC2_ADC_Data              H3800_ASIC2_OFFSET( u16, ADC, Data )
-
-#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK         0x07    /* Low 3 bits sets channel.  max = 4 */
-#define H3600_ASIC2_ADC_MUX_CLKEN          ( 1 << 3 )    /* Enable clock */
-
-#define H3600_ASIC2_ADC_CSR_ADPS_MASK            0x0f    /* Low 4 bits sets prescale, max = 8 */
-#define H3600_ASIC2_ADC_CSR_FREE_RUN       ( 1 << 4 )
-#define H3600_ASIC2_ADC_CSR_INT_ENABLE     ( 1 << 5 )
-#define H3600_ASIC2_ADC_CSR_START          ( 1 << 6 )    /* Set to start conversion.  Goes to 0 when done */
-#define H3600_ASIC2_ADC_CSR_ENABLE         ( 1 << 7 )    /* 1:power up ADC, 0:power down */
-
-
-#define _H3800_ASIC2_INTR_Base                 0x1600
-#define _H3800_ASIC2_INTR_MaskAndFlag          0x0000    /* R/(W) 8bits */
-#define _H3800_ASIC2_INTR_ClockPrescale        0x0004    /* R/(W) 5bits */
-#define _H3800_ASIC2_INTR_TimerSet             0x0008    /* R/(W) 8bits */
-
-#define H3800_ASIC2_INTR_MaskAndFlag      H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
-#define H3800_ASIC2_INTR_ClockPrescale    H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
-#define H3800_ASIC2_INTR_TimerSet         H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
-
-#define H3800_ASIC2_INTR_GLOBAL_MASK       ( 1 << 0 )    /* Global interrupt mask */
-#define H3800_ASIC2_INTR_POWER_ON_RESET    ( 1 << 1 )    /* 01: Power on reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_EXTERNAL_RESET    ( 2 << 1 )    /* 10: External reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_MASK_UART_0       ( 1 << 4 )
-#define H3800_ASIC2_INTR_MASK_UART_1       ( 1 << 5 )
-#define H3800_ASIC2_INTR_MASK_TIMER        ( 1 << 6 )
-#define H3800_ASIC2_INTR_MASK_OWM          ( 1 << 7 )
-
-#define H3800_ASIC2_INTR_CLOCK_PRESCALE          0x0f    /* 4 bits, max 14 */
-#define H3800_ASIC2_INTR_SET               ( 1 << 4 )    /* Time base enable */
-
-
-#define _H3800_ASIC2_OWM_Base                  0x1800
-#define _H3800_ASIC2_OWM_Command               0x0000    /* R/W 4 bits command register */
-#define _H3800_ASIC2_OWM_Data                  0x0004    /* R/W 8 bits, transmit / receive buffer */
-#define _H3800_ASIC2_OWM_Interrupt             0x0008    /* R/W Command register */
-#define _H3800_ASIC2_OWM_InterruptEnable       0x000c    /* R/W Command register */
-#define _H3800_ASIC2_OWM_ClockDivisor          0x0010    /* R/W 5 bits of divisor and pre-scale */
-
-#define H3800_ASIC2_OWM_Command            H3800_ASIC2_OFFSET( u8, OWM, Command )
-#define H3800_ASIC2_OWM_Data               H3800_ASIC2_OFFSET( u8, OWM, Data )
-#define H3800_ASIC2_OWM_Interrupt          H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
-#define H3800_ASIC2_OWM_InterruptEnable    H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
-#define H3800_ASIC2_OWM_ClockDivisor       H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
-
-#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 )    /* Set to force reset on 1-wire bus */
-#define H3800_ASIC2_OWM_CMD_SRA            ( 1 << 1 )    /* Set to switch to Search ROM accelerator mode */
-#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT      ( 1 << 2 )    /* Write only - forces bus low */
-#define H3800_ASIC2_OWM_CMD_DQ_INPUT       ( 1 << 3 )    /* Read only - reflects state of bus */
-
-#define H3800_ASIC2_OWM_INT_PD             ( 1 << 0 )    /* Presence detect */
-#define H3800_ASIC2_OWM_INT_PDR            ( 1 << 1 )    /* Presence detect result */
-#define H3800_ASIC2_OWM_INT_TBE            ( 1 << 2 )    /* Transmit buffer empty */
-#define H3800_ASIC2_OWM_INT_TEMT           ( 1 << 3 )    /* Transmit shift register empty */
-#define H3800_ASIC2_OWM_INT_RBF            ( 1 << 4 )    /* Receive buffer full */
-
-#define H3800_ASIC2_OWM_INTEN_EPD          ( 1 << 0 )    /* Enable receive buffer full interrupt */
-#define H3800_ASIC2_OWM_INTEN_IAS          ( 1 << 1 )    /* Enable transmit shift register empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETBE         ( 1 << 2 )    /* Enable transmit buffer empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETMT         ( 1 << 3 )    /* INTR active state */
-#define H3800_ASIC2_OWM_INTEN_ERBF         ( 1 << 4 )    /* Enable presence detect interrupt */
-
-#define _H3800_ASIC2_FlashCtl_Base             0x1A00
-
-/****************************************************/
-/* H3800, ASIC #1
- * This ASIC is accesed through ASIC #2, and
- * mapped into the 1c00 - 1f00 region
- */
-
-#define H3800_ASIC1_OFFSET(s,x,y)   \
-     (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
-
-#define _H3800_ASIC1_MMC_Base             0x1c00
-
-#define _H3800_ASIC1_MMC_StartStopClock     0x00    /* R/W 8bit                                  */
-#define _H3800_ASIC1_MMC_Status             0x02    /* R   See below, default 0x0040             */
-#define _H3800_ASIC1_MMC_ClockRate          0x04    /* R/W 8bit, low 3 bits are clock divisor    */
-#define _H3800_ASIC1_MMC_SPIRegister        0x08    /* R/W 8bit, see below                       */
-#define _H3800_ASIC1_MMC_CmdDataCont        0x0a    /* R/W 8bit, write to start MMC adapter      */
-#define _H3800_ASIC1_MMC_ResponseTimeout    0x0c    /* R/W 8bit, clocks before response timeout  */
-#define _H3800_ASIC1_MMC_ReadTimeout        0x0e    /* R/W 16bit, clocks before received data timeout */
-#define _H3800_ASIC1_MMC_BlockLength        0x10    /* R/W 10bit */
-#define _H3800_ASIC1_MMC_NumOfBlocks        0x12    /* R/W 16bit, in block mode, number of blocks  */
-#define _H3800_ASIC1_MMC_InterruptMask      0x1a    /* R/W 8bit */
-#define _H3800_ASIC1_MMC_CommandNumber      0x1c    /* R/W 6 bits */
-#define _H3800_ASIC1_MMC_ArgumentH          0x1e    /* R/W 16 bits  */
-#define _H3800_ASIC1_MMC_ArgumentL          0x20    /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ResFifo            0x22    /* R   8 x 16 bits - contains response FIFO */
-#define _H3800_ASIC1_MMC_BufferPartFull     0x28    /* R/W 8 bits */
-
-#define H3800_ASIC1_MMC_StartStopClock    H3800_ASIC1_OFFSET(  u8, MMC, StartStopClock )
-#define H3800_ASIC1_MMC_Status            H3800_ASIC1_OFFSET( u16, MMC, Status )
-#define H3800_ASIC1_MMC_ClockRate         H3800_ASIC1_OFFSET(  u8, MMC, ClockRate )
-#define H3800_ASIC1_MMC_SPIRegister       H3800_ASIC1_OFFSET(  u8, MMC, SPIRegister )
-#define H3800_ASIC1_MMC_CmdDataCont       H3800_ASIC1_OFFSET(  u8, MMC, CmdDataCont )
-#define H3800_ASIC1_MMC_ResponseTimeout   H3800_ASIC1_OFFSET(  u8, MMC, ResponseTimeout )
-#define H3800_ASIC1_MMC_ReadTimeout       H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
-#define H3800_ASIC1_MMC_BlockLength       H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
-#define H3800_ASIC1_MMC_NumOfBlocks       H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
-#define H3800_ASIC1_MMC_InterruptMask     H3800_ASIC1_OFFSET(  u8, MMC, InterruptMask )
-#define H3800_ASIC1_MMC_CommandNumber     H3800_ASIC1_OFFSET(  u8, MMC, CommandNumber )
-#define H3800_ASIC1_MMC_ArgumentH         H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
-#define H3800_ASIC1_MMC_ArgumentL         H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
-#define H3800_ASIC1_MMC_ResFifo           H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
-#define H3800_ASIC1_MMC_BufferPartFull    H3800_ASIC1_OFFSET(  u8, MMC, BufferPartFull )
-
-#define H3800_ASIC1_MMC_STOP_CLOCK                   (1 << 0)   /* Write to "StartStopClock" register */
-#define H3800_ASIC1_MMC_START_CLOCK                  (1 << 1)
-
-#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT          (1 << 0)
-#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT      (1 << 1)
-#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR       (1 << 2)
-#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR        (1 << 3)
-#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR        (1 << 4)  /* SPI data token error received */
-#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR    (1 << 5)
-#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY            (1 << 6)
-#define H3800_ASIC1_MMC_STATUS_FIFO_FULL             (1 << 7)
-#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE          (1 << 8)  /* MultiMediaCard clock stopped */
-#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE    (1 << 11) /* Write operation, indicates transfer finished */
-#define H3800_ASIC1_MMC_STATUS_END_PROGRAM           (1 << 12) /* End write and read operations */
-#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE  (1 << 13) /* End command response */
-
-#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE           (1 << 0)  /* Enables SPI mode */
-#define H3800_ASIC1_MMC_SPI_REG_CRC_ON               (1 << 1)  /* 1:turn on CRC    */
-#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE        (1 << 2)  /* 1:turn on SPI CS */
-#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK      0x38      /* Bits 3,4,5 are the SPI CS relative address */
-
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE  0x00
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1           0x01
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2           0x02
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3           0x03
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE         (1 << 2)  /* This command contains a data transfer */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE               (1 << 3)  /* This data transfer is a write */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE         (1 << 4)  /* This data transfer is in stream mode */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT            (1 << 5)  /* Busy signal expected after current cmd */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE          (1 << 6)  /* Enables the 80 bits for initializing card */
-
-#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE       (1 << 0)
-#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE             (1 << 1)
-#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE     (1 << 2)
-#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY             (1 << 3)
-
-#define H3800_ASIC1_MMC_BUFFER_PART_FULL                  (1 << 0)
-
-/********* GPIO **********/
-
-#define _H3800_ASIC1_GPIO_Base        0x1e00
-
-#define _H3800_ASIC1_GPIO_Mask          0x30    /* R/W 0:don't mask, 1:mask interrupt */
-#define _H3800_ASIC1_GPIO_Direction     0x32    /* R/W 0:input, 1:output              */
-#define _H3800_ASIC1_GPIO_Out           0x34    /* R/W 0:output low, 1:output high    */
-#define _H3800_ASIC1_GPIO_TriggerType   0x36    /* R/W 0:level, 1:edge                */
-#define _H3800_ASIC1_GPIO_EdgeTrigger   0x38    /* R/W 0:falling, 1:rising            */
-#define _H3800_ASIC1_GPIO_LevelTrigger  0x3A    /* R/W 0:low, 1:high level detect     */
-#define _H3800_ASIC1_GPIO_LevelStatus   0x3C    /* R/W 0:none, 1:detect               */
-#define _H3800_ASIC1_GPIO_EdgeStatus    0x3E    /* R/W 0:none, 1:detect               */
-#define _H3800_ASIC1_GPIO_State         0x40    /* R   See masks below  (default 0)         */
-#define _H3800_ASIC1_GPIO_Reset         0x42    /* R/W See masks below  (default 0x04)      */
-#define _H3800_ASIC1_GPIO_SleepMask     0x44    /* R/W 0:don't mask, 1:mask trigger in sleep mode  */
-#define _H3800_ASIC1_GPIO_SleepDir      0x46    /* R/W direction 0:input, 1:output in sleep mode    */
-#define _H3800_ASIC1_GPIO_SleepOut      0x48    /* R/W level 0:low, 1:high in sleep mode           */
-#define _H3800_ASIC1_GPIO_Status        0x4A    /* R   Pin status                                  */
-#define _H3800_ASIC1_GPIO_BattFaultDir  0x4C    /* R/W direction 0:input, 1:output in batt_fault   */
-#define _H3800_ASIC1_GPIO_BattFaultOut  0x4E    /* R/W level 0:low, 1:high in batt_fault           */
-
-#define H3800_ASIC1_GPIO_Mask         H3800_ASIC1_OFFSET( u16, GPIO, Mask )
-#define H3800_ASIC1_GPIO_Direction    H3800_ASIC1_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC1_GPIO_Out          H3800_ASIC1_OFFSET( u16, GPIO, Out )
-#define H3800_ASIC1_GPIO_TriggerType  H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
-#define H3800_ASIC1_GPIO_EdgeTrigger  H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
-#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
-#define H3800_ASIC1_GPIO_LevelStatus  H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
-#define H3800_ASIC1_GPIO_EdgeStatus   H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
-#define H3800_ASIC1_GPIO_State        H3800_ASIC1_OFFSET(  u8, GPIO, State )
-#define H3800_ASIC1_GPIO_Reset        H3800_ASIC1_OFFSET(  u8, GPIO, Reset )
-#define H3800_ASIC1_GPIO_SleepMask    H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
-#define H3800_ASIC1_GPIO_SleepDir     H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
-#define H3800_ASIC1_GPIO_SleepOut     H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
-#define H3800_ASIC1_GPIO_Status       H3800_ASIC1_OFFSET( u16, GPIO, Status )
-#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
-#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
-
-#define H3800_ASIC1_GPIO_STATE_MASK            (1 << 0)
-#define H3800_ASIC1_GPIO_STATE_DIRECTION       (1 << 1)
-#define H3800_ASIC1_GPIO_STATE_OUT             (1 << 2)
-#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE    (1 << 3)
-#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER    (1 << 4)
-#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER   (1 << 5)
-
-#define H3800_ASIC1_GPIO_RESET_SOFTWARE        (1 << 0)
-#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP      (1 << 1)
-#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON    (1 << 2)
-
-/* These are all outputs */
-#define GPIO_H3800_ASIC1_IR_ON_N          (1 << 0)   /* Apply power to the IR Module */
-#define GPIO_H3800_ASIC1_SD_PWR_ON        (1 << 1)   /* Secure Digital power on */
-#define GPIO_H3800_ASIC1_RS232_ON         (1 << 2)   /* Turn on power to the RS232 chip ? */
-#define GPIO_H3800_ASIC1_PULSE_GEN        (1 << 3)   /* Goes to speaker / earphone */
-#define GPIO_H3800_ASIC1_CH_TIMER         (1 << 4)   /* */
-#define GPIO_H3800_ASIC1_LCD_5V_ON        (1 << 5)   /* Enables LCD_5V */
-#define GPIO_H3800_ASIC1_LCD_ON           (1 << 6)   /* Enables LCD_3V */
-#define GPIO_H3800_ASIC1_LCD_PCI          (1 << 7)   /* Connects to PDWN on LCD controller */
-#define GPIO_H3800_ASIC1_VGH_ON           (1 << 8)   /* Drives VGH on the LCD (+9??) */
-#define GPIO_H3800_ASIC1_VGL_ON           (1 << 9)   /* Drivers VGL on the LCD (-6??) */
-#define GPIO_H3800_ASIC1_FL_PWR_ON        (1 << 10)  /* Frontlight power on */
-#define GPIO_H3800_ASIC1_BT_PWR_ON        (1 << 11)  /* Bluetooth power on */
-#define GPIO_H3800_ASIC1_SPK_ON           (1 << 12)  /* */
-#define GPIO_H3800_ASIC1_EAR_ON_N         (1 << 13)  /* */
-#define GPIO_H3800_ASIC1_AUD_PWR_ON       (1 << 14)  /* */
-
-/* Write enable for the flash */
-
-#define _H3800_ASIC1_FlashWP_Base         0x1F00
-#define _H3800_ASIC1_FlashWP_VPP_ON         0x00    /* R   1: write, 0: protect */
-#define H3800_ASIC1_FlashWP_VPP_ON       H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
 
 #endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 0cb36609b3a..ae81f80b0cf 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -153,8 +153,6 @@
  */
 #ifdef CONFIG_SA1111
 #define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS			(IRQ_BOARD_END)
 #elif defined(CONFIG_SHARP_LOCOMO)
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #else
@@ -175,23 +173,3 @@
 #define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
 #define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
 
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
-#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT    9
-
-#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT    5
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 63755ca5b1b..942b153e251 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -10,7 +10,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if (mode == 's') {
 		/* Jump into ROM at address 0 */
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 81848aa9642..fd776bb666c 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -226,12 +226,22 @@ static struct platform_device jornada_ssp_device = {
 	.id             = -1,
 };
 
+static struct platform_device jornada_kbd_device = {
+	.name		= "jornada720_kbd",
+	.id		= -1,
+};
+
+static struct platform_device jornada_ts_device = {
+	.name		= "jornada_ts",
+	.id		= -1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
-#ifdef CONFIG_SA1100_JORNADA720_SSP
 	&jornada_ssp_device,
-#endif
 	&s1d13xxxfb_device,
+	&jornada_kbd_device,
+	&jornada_ts_device,
 };
 
 static int __init jornada720_init(void)
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a23fd3d0163..358d875ace1 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -16,12 +16,28 @@
 #include <asm/leds.h>
 #include <asm/param.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#define IO_BASE                 0xe0000000
+#define IO_SIZE                 0x08000000
+#define IO_START                0x40000000
+#define ROMCARD_SIZE            0x08000000
+#define ROMCARD_START           0x10000000
+
+void arch_reset(char mode, const char *cmd)
+{
+        short temp;
+        local_irq_disable();
+        /* Reset the Machine via pc[3] of the sequoia chipset */
+        outw(0x09,0x24);
+        temp=inw(0x26);
+        temp = temp | (1<<3) | (1<<10);
+        outw(0x09,0x24);
+        outw(temp,0x26);
+}
+
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.iobase		= 0x3f8,
@@ -50,14 +66,38 @@ static struct platform_device serial_device = {
 	},
 };
 
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0x70,
+		.end	= 0x73,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= IRQ_ISA_RTC_ALARM,
+		.end	= IRQ_ISA_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= rtc_resources,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+};
+
 static int __init shark_init(void)
 {
 	int ret;
 
 	if (machine_is_shark())
+	{
+	        ret = platform_device_register(&rtc_device);
+		if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
 		ret = platform_device_register(&serial_device);
-
-	return ret;
+		if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
+	}
+	return 0;
 }
 
 arch_initcall(shark_init);
diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c
index 6774b8d5d13..10b5b8b3272 100644
--- a/arch/arm/mach-shark/dma.c
+++ b/arch/arm/mach-shark/dma.c
@@ -13,9 +13,11 @@
 #include <asm/dma.h>
 #include <asm/mach/dma.h>
 
-void __init arch_dma_init(dma_t *dma)
+static int __init shark_dma_init(void)
 {
 #ifdef CONFIG_ISA_DMA
-	isa_init_dma(dma);
+	isa_init_dma();
 #endif
+	return 0;
 }
+core_initcall(shark_dma_init);
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 0836cb78b29..f97a7626bd5 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -27,5 +27,3 @@
 		bne	1001b
 		.endm
 
-		.macro	waituart,rd,rx
-		.endm
diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h
new file mode 100644
index 00000000000..84a5bf6e5ba
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/framebuffer.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-shark/include/mach/framebuffer.h
+ *
+ * by Alexander Schulz
+ *
+ */
+
+#ifndef __ASM_ARCH_FRAMEBUFFER_H
+#define __ASM_ARCH_FRAMEBUFFER_H
+
+/* defines for the Framebuffer */
+#define FB_START		0x06000000
+#define FB_SIZE			0x01000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
index 01bf76099ce..94d84b27a0c 100644
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -10,35 +10,8 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE			0xe0000000
-
-#else
-
-#define IO_BASE			0
-
-#endif
-
-#define IO_SIZE			0x08000000
-#define IO_START		0x40000000
-#define ROMCARD_SIZE		0x08000000
-#define ROMCARD_START		0x10000000
-
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
 #define UNCACHEABLE_ADDR        0xdf010000
 
-#define SEQUOIA_LED_GREEN       (1<<6)
-#define SEQUOIA_LED_AMBER       (1<<5)
-#define SEQUOIA_LED_BACK        (1<<7)
-
 #define pcibios_assign_all_busses()     1
 
 #define PCIBIOS_MIN_IO          0x6000
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
index c5cee829fc8..9ccbcecc430 100644
--- a/arch/arm/mach-shark/include/mach/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -11,10 +11,10 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#define PCIO_BASE	0xe0000000
-#define IO_SPACE_LIMIT	0xffffffff
+#define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)		((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(addr)	(addr)
+#define __io(a)                 ((void __iomem *)(0xe0000000 + (a)))
+
+#define __mem_pci(addr) (addr)
 
 #endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
index 0586acd7cdd..c8e8a4e1f61 100644
--- a/arch/arm/mach-shark/include/mach/irqs.h
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -7,7 +7,7 @@
 #define NR_IRQS			16
 
 #define IRQ_ISA_KEYBOARD	 1
-#define RTC_IRQ			 8
+#define IRQ_ISA_RTC_ALARM	 8
 #define I8042_KBD_IRQ		 1
 #define I8042_AUX_IRQ		12
 #define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
index 864298ff392..96c43b8f8dd 100644
--- a/arch/arm/mach-shark/include/mach/isa-dma.h
+++ b/arch/arm/mach-shark/include/mach/isa-dma.h
@@ -6,10 +6,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev /  .properties
- * in OpenFirmware.
- */
 #define MAX_DMA_CHANNELS	8
 #define DMA_ISA_CASCADE         4
 
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index c5ab038925d..3053e5b7f16 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -23,6 +23,7 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig
 {
   if (node != 0) return;
   /* Only the first 4 MB (=1024 Pages) are usable for DMA */
+  /* See dev / -> .properties in OpenFirmware. */
   zone_size[1] = zone_size[0] - 1024;
   zone_size[0] = 1024;
   zhole_size[1] = zhole_size[0];
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index e45bd734a03..21c373b30bb 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,20 +6,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-
-static void arch_reset(char mode)
-{
-	short temp;
-	local_irq_disable();
-	/* Reset the Machine via pc[3] of the sequoia chipset */
-	outw(0x09,0x24);
-	temp=inw(0x26);
-	temp = temp | (1<<3) | (1<<10);
-	outw(0x09,0x24);
-	outw(temp,0x26);
-
-}
+/* Found in arch/mach-shark/core.c */
+extern void arch_reset(char mode, const char *cmd);
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
index 3725e163341..22ccab4c3c5 100644
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -11,7 +11,7 @@
 
 static inline void putc(int c)
 {
-	int t;
+	volatile int t;
 
 	SERIAL_BASE[0] = c;
 	t=0x10000;
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 8bd8d6bb4d9..c9e32de4adf 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -22,12 +22,16 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
 #define LED_STATE_ENABLED	1
 #define LED_STATE_CLAIMED	2
+
+#define SEQUOIA_LED_GREEN       (1<<6)
+#define SEQUOIA_LED_AMBER       (1<<5)
+#define SEQUOIA_LED_BACK        (1<<7)
+
 static char led_state;
 static short hw_led_state;
 static short saved_state;
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 1c43494f5c4..565776680d8 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -335,11 +335,25 @@ static struct resource versatile_i2c_resource = {
 
 static struct platform_device versatile_i2c_device = {
 	.name			= "versatile-i2c",
-	.id			= -1,
+	.id			= 0,
 	.num_resources		= 1,
 	.resource		= &versatile_i2c_resource,
 };
 
+static struct i2c_board_info versatile_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+		.type = "ds1338",
+	},
+};
+
+static int __init versatile_i2c_init(void)
+{
+	return i2c_register_board_info(0, versatile_i2c_board_info,
+				       ARRAY_SIZE(versatile_i2c_board_info));
+}
+arch_initcall(versatile_i2c_init);
+
 #define VERSATILE_SYSMCI	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 
 unsigned int mmc_status(struct device *dev)
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
index c59e6100c7e..8ffc12a7cb2 100644
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -34,7 +34,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	u32 val;
 
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 40ff40845df..de29ddcb945 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -43,35 +43,16 @@ extern void w90p910_init_io(struct map_desc *mach_desc, int size);
 extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
 extern void w90p910_init_clocks(int xtal);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
+extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
 
-#define W90X900_RES(name)				\
-struct resource w90x900_##name##_resource[] = {		\
-	[0] = {						\
-		.start = name##_PA,			\
-		.end   = name##_PA + 0x0ff,		\
-		.flags = IORESOURCE_MEM,		\
-	},						\
-	[1] = {						\
-		.start = IRQ_##name,			\
-		.end   = IRQ_##name,			\
-		.flags = IORESOURCE_IRQ,		\
-	}						\
-}
-
-#define W90X900_DEVICE(devname, regname, devid, platdevname)		\
-struct platform_device w90x900_##devname = {				\
-	.name		= platdevname,					\
-	.id		= devid,					\
-	.num_resources 	= ARRAY_SIZE(w90x900_##regname##_resource),	\
-	.resource 	= w90x900_##regname##_resource,			\
-}
-
-#define W90X900_UARTCFG(port, flag, uc, ulc, ufc)	\
-{							\
-		.hwport	= port,				\
-		.flags	= flag,				\
-		.ucon	= uc,				\
-		.ulcon	= ulc,				\
-		.ufcon	= ufc,				\
+#define W90X900_8250PORT(name)					\
+{								\
+	.membase	= name##_BA,				\
+	.mapbase	= name##_PA,				\
+	.irq		= IRQ_##name,				\
+	.uartclk	= 11313600,				\
+	.regshift	= 2,					\
+	.iotype		= UPIO_MEM,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
 }
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index 93753f92261..94064006685 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -21,7 +21,7 @@ static void arch_idle(void)
 {
 }
 
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 9ebc93f4853..726ff6798a5 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -22,6 +22,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,28 +33,67 @@
 #include <mach/map.h>
 
 #include "cpu.h"
+/*w90p910 evb norflash driver data */
 
-static struct map_desc w90p910_iodesc[] __initdata = {
+#define W90P910_FLASH_BASE	0xA0000000
+#define W90P910_FLASH_SIZE	0x400000
+
+static struct mtd_partition w90p910_flash_partitions[] = {
+	{
+		.name	=	"NOR Partition 1 for kernel (960K)",
+		.size	=	0xF0000,
+		.offset	=	0x10000,
+	},
+	{
+		.name	=	"NOR Partition 2 for image (1M)",
+		.size	=	0x100000,
+		.offset	=	0x100000,
+	},
+	{
+		.name	=	"NOR Partition 3 for user (2M)",
+		.size	=	0x200000,
+		.offset	=	0x00200000,
+	}
 };
 
-static struct w90x900_uartcfg w90p910_uartcfgs[] = {
-	W90X900_UARTCFG(0, 0, 0, 0, 0),
-	W90X900_UARTCFG(1, 0, 0, 0, 0),
-	W90X900_UARTCFG(2, 0, 0, 0, 0),
-	W90X900_UARTCFG(3, 0, 0, 0, 0),
-	W90X900_UARTCFG(4, 0, 0, 0, 0),
+static struct physmap_flash_data w90p910_flash_data = {
+	.width		=	2,
+	.parts		=	w90p910_flash_partitions,
+	.nr_parts	=	ARRAY_SIZE(w90p910_flash_partitions),
+};
+
+static struct resource w90p910_flash_resources[] = {
+	{
+		.start	=	W90P910_FLASH_BASE,
+		.end	=	W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
+		.flags	=	IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device w90p910_flash_device = {
+	.name		=	"physmap-flash",
+	.id		=	0,
+	.dev		= {
+				.platform_data = &w90p910_flash_data,
+			},
+	.resource	=	w90p910_flash_resources,
+	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
+};
+
+static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
 /*Here should be your evb resourse,such as LCD*/
 
 static struct platform_device *w90p910evb_dev[] __initdata = {
+	&w90p910_serial_device,
+	&w90p910_flash_device,
 };
 
 static void __init w90p910evb_map_io(void)
 {
 	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
 	w90p910_init_clocks(0);
-	w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs));
 }
 
 static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index aa783bc9431..2bcbaa681b9 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/serial_8250.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -36,12 +37,6 @@
 
 #include "cpu.h"
 
-/*W90P910 has five uarts*/
-
-#define MAX_UART_COUNT 5
-static int uart_count;
-static struct platform_device *uart_devs[MAX_UART_COUNT-1];
-
 /* Initial IO mappings */
 
 static struct map_desc w90p910_iodesc[] __initdata = {
@@ -53,48 +48,19 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 	/*IODESC_ENT(LCD),*/
 };
 
-/*Init the dev resource*/
-
-static W90X900_RES(UART0);
-static W90X900_RES(UART1);
-static W90X900_RES(UART2);
-static W90X900_RES(UART3);
-static W90X900_RES(UART4);
-static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart");
-static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart");
-static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart");
-static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart");
-static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart");
-
-static struct platform_device *uart_devices[] __initdata = {
-	&w90x900_uart0,
-	&w90x900_uart1,
-	&w90x900_uart2,
-	&w90x900_uart3,
-	&w90x900_uart4
-};
+/* Initial serial platform data */
 
-/*Init W90P910 uart device*/
+struct plat_serial8250_port w90p910_uart_data[] = {
+	W90X900_8250PORT(UART0),
+};
 
-void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no)
-{
-	struct platform_device *platdev;
-	int uart, uartdev;
-
-	/*By min() to judge count of uart be used indeed*/
-
-	uartdev = ARRAY_SIZE(uart_devices);
-	no = min(uartdev, no);
-
-	for (uart = 0; uart < no; uart++, cfg++) {
-		if (cfg->hwport != uart)
-			printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart);
-		platdev = uart_devices[cfg->hwport];
-		uart_devs[uart] = platdev;
-		platdev->dev.platform_data = cfg;
-	}
-	uart_count = uart;
-}
+struct platform_device w90p910_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= w90p910_uart_data,
+	},
+};
 
 /*Init W90P910 evb io*/
 
@@ -122,13 +88,6 @@ static int __init w90p910_init_cpu(void)
 
 static int __init w90x900_arch_init(void)
 {
-	int ret;
-
-	ret = w90p910_init_cpu();
-	if (ret != 0)
-		return ret;
-
-	return platform_add_devices(uart_devs, uart_count);
-
+	return w90p910_init_cpu();
 }
 arch_initcall(w90x900_arch_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d490f3773c0..a6230f7a24c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -340,6 +340,17 @@ config CPU_XSC3
 	select CPU_TLB_V4WBI if MMU
 	select IO_36
 
+# Marvell PJ1 (Mohawk)
+config CPU_MOHAWK
+	bool
+	select CPU_32v5
+	select CPU_ABRT_EV5T
+	select CPU_PABRT_NOIFAR
+	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
+	select CPU_TLB_V4WBI if MMU
+	select CPU_COPY_V4WB if MMU
+
 # Feroceon
 config CPU_FEROCEON
 	bool
@@ -569,7 +580,7 @@ comment "Processor Features"
 
 config ARM_THUMB
 	bool "Support Thumb user binaries"
-	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
+	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
 	default y
 	help
 	  Say Y if you want to include kernel support for running user space
@@ -653,7 +664,7 @@ config CPU_CACHE_ROUND_ROBIN
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7
+	depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 
@@ -704,7 +715,8 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
-	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || REALVIEW_EB_A9MP
+	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
 	default y
 	select OUTER_CACHE
 	help
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 480f78a3611..c264683538b 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MODULES)		+= proc-syms.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
 obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o
+obj-$(CONFIG_HIGHMEM)		+= highmem.o
 
 obj-$(CONFIG_CPU_ABRT_NOMMU)	+= abort-nommu.o
 obj-$(CONFIG_CPU_ABRT_EV4)	+= abort-ev4.o
@@ -70,6 +71,7 @@ obj-$(CONFIG_CPU_SA110)		+= proc-sa110.o
 obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= proc-xsc3.o
+obj-$(CONFIG_CPU_MOHAWK)	+= proc-mohawk.o
 obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroceon.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 80cd207cbae..d6dd83826f8 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -14,8 +14,12 @@
 
 #include <linux/init.h>
 #include <asm/cacheflush.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
 #include <plat/cache-feroceon-l2.h>
-
+#include "mm.h"
 
 /*
  * Low-level cache maintenance operations.
@@ -34,14 +38,36 @@
  * The range operations require two successive cp15 writes, in
  * between which we don't want to be preempted.
  */
+
+static inline unsigned long l2_start_va(unsigned long paddr)
+{
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * Let's do our own fixmap stuff in a minimal way here.
+	 * Because range ops can't be done on physical addresses,
+	 * we simply install a virtual mapping for it only for the
+	 * TLB lookup to occur, hence no need to flush the untouched
+	 * memory mapping.  This is protected with the disabling of
+	 * interrupts by the caller.
+	 */
+	unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
+	unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
+	local_flush_tlb_kernel_page(vaddr);
+	return vaddr + (paddr & ~PAGE_MASK);
+#else
+	return __phys_to_virt(paddr);
+#endif
+}
+
 static inline void l2_clean_pa(unsigned long addr)
 {
 	__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
 }
 
-static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
+static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
+	unsigned long va_start, va_end, flags;
 
 	/*
 	 * Make sure 'start' and 'end' reference the same page, as
@@ -51,17 +77,14 @@ static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
 	BUG_ON((start ^ end) >> PAGE_SHIFT);
 
 	raw_local_irq_save(flags);
+	va_start = l2_start_va(start);
+	va_end = va_start + (end - start);
 	__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
 		"mcr p15, 1, %1, c15, c9, 5"
-		: : "r" (start), "r" (end));
+		: : "r" (va_start), "r" (va_end));
 	raw_local_irq_restore(flags);
 }
 
-static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
-{
-	l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-}
-
 static inline void l2_clean_inv_pa(unsigned long addr)
 {
 	__asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
@@ -72,9 +95,9 @@ static inline void l2_inv_pa(unsigned long addr)
 	__asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
 }
 
-static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
+static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
+	unsigned long va_start, va_end, flags;
 
 	/*
 	 * Make sure 'start' and 'end' reference the same page, as
@@ -84,17 +107,14 @@ static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
 	BUG_ON((start ^ end) >> PAGE_SHIFT);
 
 	raw_local_irq_save(flags);
+	va_start = l2_start_va(start);
+	va_end = va_start + (end - start);
 	__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
 		"mcr p15, 1, %1, c15, c11, 5"
-		: : "r" (start), "r" (end));
+		: : "r" (va_start), "r" (va_end));
 	raw_local_irq_restore(flags);
 }
 
-static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
-{
-	l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-}
-
 
 /*
  * Linux primitives.
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 464de893a98..5d180cb0bd9 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -17,12 +17,14 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
 #include <asm/system.h>
 #include <asm/cputype.h>
 #include <asm/cacheflush.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include "mm.h"
 
 #define CR_L2	(1 << 26)
 
@@ -47,21 +49,11 @@ static inline void xsc3_l2_clean_mva(unsigned long addr)
 	__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
 }
 
-static inline void xsc3_l2_clean_pa(unsigned long addr)
-{
-	xsc3_l2_clean_mva(__phys_to_virt(addr));
-}
-
 static inline void xsc3_l2_inv_mva(unsigned long addr)
 {
 	__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
 }
 
-static inline void xsc3_l2_inv_pa(unsigned long addr)
-{
-	xsc3_l2_inv_mva(__phys_to_virt(addr));
-}
-
 static inline void xsc3_l2_inv_all(void)
 {
 	unsigned long l2ctype, set_way;
@@ -79,50 +71,103 @@ static inline void xsc3_l2_inv_all(void)
 	dsb();
 }
 
+#ifdef CONFIG_HIGHMEM
+#define l2_map_save_flags(x)		raw_local_save_flags(x)
+#define l2_map_restore_flags(x)		raw_local_irq_restore(x)
+#else
+#define l2_map_save_flags(x)		((x) = 0)
+#define l2_map_restore_flags(x)		((void)(x))
+#endif
+
+static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
+				      unsigned long flags)
+{
+#ifdef CONFIG_HIGHMEM
+	unsigned long va = prev_va & PAGE_MASK;
+	unsigned long pa_offset = pa << (32 - PAGE_SHIFT);
+	if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) {
+		/*
+		 * Switching to a new page.  Because cache ops are
+		 * using virtual addresses only, we must put a mapping
+		 * in place for it.  We also enable interrupts for a
+		 * short while and disable them again to protect this
+		 * mapping.
+		 */
+		unsigned long idx;
+		raw_local_irq_restore(flags);
+		idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
+		va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+		raw_local_irq_restore(flags | PSR_I_BIT);
+		set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
+		local_flush_tlb_kernel_page(va);
+	}
+	return va + (pa_offset >> (32 - PAGE_SHIFT));
+#else
+	return __phys_to_virt(pa);
+#endif
+}
+
 static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 {
+	unsigned long vaddr, flags;
+
 	if (start == 0 && end == -1ul) {
 		xsc3_l2_inv_all();
 		return;
 	}
 
+	vaddr = -1;  /* to force the first mapping */
+	l2_map_save_flags(flags);
+
 	/*
 	 * Clean and invalidate partial first cache line.
 	 */
 	if (start & (CACHE_LINE_SIZE - 1)) {
-		xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1));
-		xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
+		xsc3_l2_clean_mva(vaddr);
+		xsc3_l2_inv_mva(vaddr);
 		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
 	}
 
 	/*
-	 * Clean and invalidate partial last cache line.
+	 * Invalidate all full cache lines between 'start' and 'end'.
 	 */
-	if (start < end && (end & (CACHE_LINE_SIZE - 1))) {
-		xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
-		xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
-		end &= ~(CACHE_LINE_SIZE - 1);
+	while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
+		vaddr = l2_map_va(start, vaddr, flags);
+		xsc3_l2_inv_mva(vaddr);
+		start += CACHE_LINE_SIZE;
 	}
 
 	/*
-	 * Invalidate all full cache lines between 'start' and 'end'.
+	 * Clean and invalidate partial last cache line.
 	 */
-	while (start < end) {
-		xsc3_l2_inv_pa(start);
-		start += CACHE_LINE_SIZE;
+	if (start < end) {
+		vaddr = l2_map_va(start, vaddr, flags);
+		xsc3_l2_clean_mva(vaddr);
+		xsc3_l2_inv_mva(vaddr);
 	}
 
+	l2_map_restore_flags(flags);
+
 	dsb();
 }
 
 static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
 {
+	unsigned long vaddr, flags;
+
+	vaddr = -1;  /* to force the first mapping */
+	l2_map_save_flags(flags);
+
 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
-		xsc3_l2_clean_pa(start);
+		vaddr = l2_map_va(start, vaddr, flags);
+		xsc3_l2_clean_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}
 
+	l2_map_restore_flags(flags);
+
 	dsb();
 }
 
@@ -148,18 +193,26 @@ static inline void xsc3_l2_flush_all(void)
 
 static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
 {
+	unsigned long vaddr, flags;
+
 	if (start == 0 && end == -1ul) {
 		xsc3_l2_flush_all();
 		return;
 	}
 
+	vaddr = -1;  /* to force the first mapping */
+	l2_map_save_flags(flags);
+
 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
-		xsc3_l2_clean_pa(start);
-		xsc3_l2_inv_pa(start);
+		vaddr = l2_map_va(start, vaddr, flags);
+		xsc3_l2_clean_mva(vaddr);
+		xsc3_l2_inv_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}
 
+	l2_map_restore_flags(flags);
+
 	dsb();
 }
 
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index c3ba6a94da0..70997d5bee2 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 
-static void __attribute__((naked))
+static void __naked
 feroceon_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c
index 70ed96c8af8..de9c06854ad 100644
--- a/arch/arm/mm/copypage-v3.c
+++ b/arch/arm/mm/copypage-v3.c
@@ -15,7 +15,7 @@
  *
  * FIXME: do we need to handle cache stuff...
  */
-static void __attribute__((naked))
+static void __naked
 v3_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\n\
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 1601698b980..7370a7142b0 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	asm volatile(
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 3ec93dab765..9ab09841422 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -22,7 +22,7 @@
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __attribute__((naked))
+static void __naked
 v4wb_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 0f1188efae4..300efafd664 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -20,7 +20,7 @@
  * dirty data in the cache.  However, we do have to ensure that
  * subsequent reads are up to date.
  */
-static void __attribute__((naked))
+static void __naked
 v4wt_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index 39a994542ca..bc4525f5ab2 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -29,7 +29,7 @@
  * if we eventually end up using our copied page.
  *
  */
-static void __attribute__((naked))
+static void __naked
 xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index d18f2397ee2..76824d3e966 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
  * and merged as appropriate.
  */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	/*
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 310e479309e..510c179b0ac 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -19,6 +19,7 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/memory.h>
+#include <asm/highmem.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
@@ -490,29 +491,101 @@ core_initcall(consistent_init);
  */
 void dma_cache_maint(const void *start, size_t size, int direction)
 {
-	const void *end = start + size;
+	void (*inner_op)(const void *, const void *);
+	void (*outer_op)(unsigned long, unsigned long);
 
-	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
 
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
-		dmac_inv_range(start, end);
-		outer_inv_range(__pa(start), __pa(end));
+		inner_op = dmac_inv_range;
+		outer_op = outer_inv_range;
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
-		dmac_clean_range(start, end);
-		outer_clean_range(__pa(start), __pa(end));
+		inner_op = dmac_clean_range;
+		outer_op = outer_clean_range;
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		dmac_flush_range(start, end);
-		outer_flush_range(__pa(start), __pa(end));
+		inner_op = dmac_flush_range;
+		outer_op = outer_flush_range;
 		break;
 	default:
 		BUG();
 	}
+
+	inner_op(start, start + size);
+	outer_op(__pa(start), __pa(start) + size);
 }
 EXPORT_SYMBOL(dma_cache_maint);
 
+static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
+				       size_t size, int direction)
+{
+	void *vaddr;
+	unsigned long paddr;
+	void (*inner_op)(const void *, const void *);
+	void (*outer_op)(unsigned long, unsigned long);
+
+	switch (direction) {
+	case DMA_FROM_DEVICE:		/* invalidate only */
+		inner_op = dmac_inv_range;
+		outer_op = outer_inv_range;
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		inner_op = dmac_clean_range;
+		outer_op = outer_clean_range;
+		break;
+	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
+		inner_op = dmac_flush_range;
+		outer_op = outer_flush_range;
+		break;
+	default:
+		BUG();
+	}
+
+	if (!PageHighMem(page)) {
+		vaddr = page_address(page) + offset;
+		inner_op(vaddr, vaddr + size);
+	} else {
+		vaddr = kmap_high_get(page);
+		if (vaddr) {
+			vaddr += offset;
+			inner_op(vaddr, vaddr + size);
+			kunmap_high(page);
+		}
+	}
+
+	paddr = page_to_phys(page) + offset;
+	outer_op(paddr, paddr + size);
+}
+
+void dma_cache_maint_page(struct page *page, unsigned long offset,
+			  size_t size, int dir)
+{
+	/*
+	 * A single sg entry may refer to multiple physically contiguous
+	 * pages.  But we still need to process highmem pages individually.
+	 * If highmem is not configured then the bulk of this loop gets
+	 * optimized out.
+	 */
+	size_t left = size;
+	do {
+		size_t len = left;
+		if (PageHighMem(page) && len + offset > PAGE_SIZE) {
+			if (offset >= PAGE_SIZE) {
+				page += offset / PAGE_SIZE;
+				offset %= PAGE_SIZE;
+			}
+			len = PAGE_SIZE - offset;
+		}
+		dma_cache_maint_contiguous(page, offset, len, dir);
+		offset = 0;
+		page++;
+		left -= len;
+	} while (left);
+}
+EXPORT_SYMBOL(dma_cache_maint_page);
+
 /**
  * dma_map_sg - map a set of SG buffers for streaming mode DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
@@ -610,7 +683,8 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 			continue;
 
 		if (!arch_is_coherent())
-			dma_cache_maint(sg_virt(s), s->length, dir);
+			dma_cache_maint_page(sg_page(s), s->offset,
+					     s->length, dir);
 	}
 }
 EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 0fa9bf388f0..4e283481cee 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -192,7 +192,7 @@ void flush_dcache_page(struct page *page)
 	struct address_space *mapping = page_mapping(page);
 
 #ifndef CONFIG_SMP
-	if (mapping && !mapping_mapped(mapping))
+	if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
 		set_bit(PG_dcache_dirty, &page->flags);
 	else
 #endif
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
new file mode 100644
index 00000000000..a34954d9df7
--- /dev/null
+++ b/arch/arm/mm/highmem.c
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mm/highmem.c -- ARM highmem support
+ *
+ * Author:	Nicolas Pitre
+ * Created:	september 8, 2008
+ * Copyright:	Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include "mm.h"
+
+void *kmap(struct page *page)
+{
+	might_sleep();
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+EXPORT_SYMBOL(kmap);
+
+void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+EXPORT_SYMBOL(kunmap);
+
+void *kmap_atomic(struct page *page, enum km_type type)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	idx = type + KM_TYPE_NR * smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	/*
+	 * With debugging enabled, kunmap_atomic forces that entry to 0.
+	 * Make sure it was indeed properly unmapped.
+	 */
+	BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+#endif
+	set_pte_ext(TOP_PTE(vaddr), mk_pte(page, kmap_prot), 0);
+	/*
+	 * When debugging is off, kunmap_atomic leaves the previous mapping
+	 * in place, so this TLB flush ensures the TLB is updated with the
+	 * new mapping.
+	 */
+	local_flush_tlb_kernel_page(vaddr);
+
+	return (void *)vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
+
+	if (kvaddr >= (void *)FIXADDR_START) {
+		__cpuc_flush_dcache_page((void *)vaddr);
+#ifdef CONFIG_DEBUG_HIGHMEM
+		BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+		set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
+		local_flush_tlb_kernel_page(vaddr);
+#else
+		(void) idx;  /* to kill a warning */
+#endif
+	}
+	pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
+
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	pagefault_disable();
+
+	idx = type + KM_TYPE_NR * smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+#endif
+	set_pte_ext(TOP_PTE(vaddr), pfn_pte(pfn, kmap_prot), 0);
+	local_flush_tlb_kernel_page(vaddr);
+
+	return (void *)vaddr;
+}
+
+struct page *kmap_atomic_to_page(const void *ptr)
+{
+	unsigned long vaddr = (unsigned long)ptr;
+	pte_t *pte;
+
+	if (vaddr < FIXADDR_START)
+		return virt_to_page(ptr);
+
+	pte = TOP_PTE(vaddr);
+	return pte_page(*pte);
+}
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 34df4d9d03a..8277802ec85 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
+#include <linux/highmem.h>
 
 #include <asm/mach-types.h>
 #include <asm/sections.h>
@@ -382,7 +383,7 @@ void __init bootmem_init(void)
 	for_each_node(node)
 		bootmem_free_node(node, mi);
 
-	high_memory = __va(memend_pfn << PAGE_SHIFT);
+	high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
 
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any
@@ -485,7 +486,7 @@ void __init mem_init(void)
 	int i, node;
 
 #ifndef CONFIG_DISCONTIGMEM
-	max_mapnr   = virt_to_page(high_memory) - mem_map;
+	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
 #endif
 
 	/* this will put all unused low memory onto the freelists */
@@ -504,6 +505,19 @@ void __init mem_init(void)
 				    __phys_to_pfn(__pa(swapper_pg_dir)), NULL);
 #endif
 
+#ifdef CONFIG_HIGHMEM
+	/* set highmem page free */
+	for_each_online_node(node) {
+		for_each_nodebank (i, &meminfo, node) {
+			unsigned long start = bank_pfn_start(&meminfo.bank[i]);
+			unsigned long end = bank_pfn_end(&meminfo.bank[i]);
+			if (start >= max_low_pfn + PHYS_PFN_OFFSET)
+				totalhigh_pages += free_area(start, end, NULL);
+		}
+	}
+	totalram_pages += totalhigh_pages;
+#endif
+
 	/*
 	 * Since our memory may not be contiguous, calculate the
 	 * real number of pages we have in this system
@@ -521,9 +535,10 @@ void __init mem_init(void)
 	initsize = __init_end - __init_begin;
 
 	printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
-		"%dK data, %dK init)\n",
+		"%dK data, %dK init, %luK highmem)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-		codesize >> 10, datasize >> 10, initsize >> 10);
+		codesize >> 10, datasize >> 10, initsize >> 10,
+		(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
 
 	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
 		extern int sysctl_overcommit_memory;
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 95bbe112965..c4f6f05198e 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -1,7 +1,6 @@
-/* the upper-most page table pointer */
-
 #ifdef CONFIG_MMU
 
+/* the upper-most page table pointer */
 extern pmd_t *top_pmd;
 
 #define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 5358fcc7f61..f7457fea6de 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size > __pa(high_memory))
+	if (addr + size >= __pa(high_memory - 1))
 		return 0;
 
 	return 1;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index d4d082c5c2d..1585814f841 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -18,9 +18,11 @@
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
 #include <asm/sections.h>
+#include <asm/cachetype.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
 #include <asm/tlb.h>
+#include <asm/highmem.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -243,6 +245,10 @@ static struct mem_type mem_types[] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_NONCACHED] = {
+		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+		.domain    = DOMAIN_KERNEL,
+	},
 };
 
 const struct mem_type *get_mem_type(unsigned int type)
@@ -406,9 +412,28 @@ static void __init build_mem_type_table(void)
 		kern_pgprot |= L_PTE_SHARED;
 		vecs_pgprot |= L_PTE_SHARED;
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 #endif
 	}
 
+	/*
+	 * Non-cacheable Normal - intended for memory areas that must
+	 * not cause dirty cache line writebacks when used
+	 */
+	if (cpu_arch >= CPU_ARCH_ARMv6) {
+		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+			/* Non-cacheable Normal is XCB = 001 */
+			mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+				PMD_SECT_BUFFERED;
+		} else {
+			/* For both ARMv6 and non-TEX-remapping ARMv7 */
+			mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+				PMD_SECT_TEX(1);
+		}
+	} else {
+		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
+	}
+
 	for (i = 0; i < 16; i++) {
 		unsigned long v = pgprot_val(protection_map[i]);
 		protection_map[i] = __pgprot(v | user_pgprot);
@@ -677,6 +702,10 @@ static void __init sanity_check_meminfo(void)
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
+			} else if (cache_is_vipt_aliasing()) {
+				printk(KERN_CRIT "HIGHMEM is not yet supported "
+						 "with VIPT aliasing cache, "
+						 "ignoring high memory\n");
 			} else {
 				memmove(bank + 1, bank,
 					(meminfo.nr_banks - i) * sizeof(*bank));
@@ -895,6 +924,17 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	flush_cache_all();
 }
 
+static void __init kmap_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+	pmd_t *pmd = pmd_off_k(PKMAP_BASE);
+	pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
+	BUG_ON(!pmd_none(*pmd) || !pte);
+	__pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
+	pkmap_page_table = pte + PTRS_PER_PTE;
+#endif
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
@@ -908,6 +948,7 @@ void __init paging_init(struct machine_desc *mdesc)
 	prepare_page_table();
 	bootmem_init();
 	devicemaps_init(mdesc);
+	kmap_init();
 
 	top_pmd = pmd_off_k(0xffff0000);
 
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
new file mode 100644
index 00000000000..540f5078496
--- /dev/null
+++ b/arch/arm/mm/proc-mohawk.S
@@ -0,0 +1,416 @@
+/*
+ *  linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
+ *
+ *  PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
+ *
+ *  Heavily based on proc-arm926.S and proc-xsc3.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed.  If the
+ * area is larger than this, then we flush the whole cache.
+ */
+#define CACHE_DLIMIT	32768
+
+/*
+ * The cache line size of the L1 D cache.
+ */
+#define CACHE_DLINESIZE	32
+
+/*
+ * cpu_mohawk_proc_init()
+ */
+ENTRY(cpu_mohawk_proc_init)
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_proc_fin()
+ */
+ENTRY(cpu_mohawk_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	bl	mohawk_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1800			@ ...iz...........
+	bic	r0, r0, #0x0006			@ .............ca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_mohawk_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ *
+ * (same as arm926)
+ */
+	.align	5
+ENTRY(cpu_mohawk_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x0007			@ .............cam
+	bic	ip, ip, #0x1100			@ ...i...s........
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+/*
+ * cpu_mohawk_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+	.align	5
+ENTRY(cpu_mohawk_do_idle)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Clean and invalidate all cache entries in a particular
+ *	address space.
+ */
+ENTRY(mohawk_flush_user_cache_all)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(mohawk_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	mov	ip, #0
+__flush_whole_cache:
+	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcrne	p15, 0, ip, c7, c10, 0		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, flags)
+ *
+ *	Clean and invalidate a range of cache entries in the
+ *	specified address range.
+ *
+ *	- start	- start address (inclusive)
+ *	- end	- end address (exclusive)
+ *	- flags	- vm_flags describing address space
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_flush_user_cache_range)
+	mov	ip, #0
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #CACHE_DLIMIT
+	bgt	__flush_whole_cache
+1:	tst	r2, #VM_EXEC
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(mohawk_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_coherent_user_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(mohawk_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_inv_range)
+	tst	r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_clean_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(mohawk_dma_flush_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:
+	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+ENTRY(mohawk_cache_fns)
+	.long	mohawk_flush_kern_cache_all
+	.long	mohawk_flush_user_cache_all
+	.long	mohawk_flush_user_cache_range
+	.long	mohawk_coherent_kern_range
+	.long	mohawk_coherent_user_range
+	.long	mohawk_flush_kern_dcache_page
+	.long	mohawk_dma_inv_range
+	.long	mohawk_dma_clean_range
+	.long	mohawk_dma_flush_range
+
+ENTRY(cpu_mohawk_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	subs	r1, r1, #CACHE_DLINESIZE
+	bhi	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_mohawk_switch_mm)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	orr	r0, r0, #0x18			@ cache the page table in L2
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	5
+ENTRY(cpu_mohawk_set_pte_ext)
+	armv3_set_pte_ext
+	mov	r0, r0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+	__INIT
+
+	.type	__mohawk_setup, #function
+__mohawk_setup:
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs
+	orr	r4, r4, #0x18			@ cache the page table in L2
+	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
+
+	mov	r0, #0				@ don't allow CP access
+	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
+
+	adr	r5, mohawk_crval
+	ldmia	r5, {r5, r6}
+	mrc	p15, 0, r0, c1, c0		@ get control register
+	bic	r0, r0, r5
+	orr	r0, r0, r6
+	mov	pc, lr
+
+	.size	__mohawk_setup, . - __mohawk_setup
+
+	/*
+	 *  R
+	 * .RVI ZFRS BLDP WCAM
+	 * .011 1001 ..00 0101
+	 *
+	 */
+	.type	mohawk_crval, #object
+mohawk_crval:
+	crval	clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+	.type	mohawk_processor_functions, #object
+mohawk_processor_functions:
+	.word	v5t_early_abort
+	.word	pabort_noifar
+	.word	cpu_mohawk_proc_init
+	.word	cpu_mohawk_proc_fin
+	.word	cpu_mohawk_reset
+	.word	cpu_mohawk_do_idle
+	.word	cpu_mohawk_dcache_clean_area
+	.word	cpu_mohawk_switch_mm
+	.word	cpu_mohawk_set_pte_ext
+	.size	mohawk_processor_functions, . - mohawk_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv5te"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v5"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_mohawk_name, #object
+cpu_mohawk_name:
+	.asciz	"Marvell 88SV331x"
+	.size	cpu_mohawk_name, . - cpu_mohawk_name
+
+	.align
+
+	.section ".proc.info.init", #alloc, #execinstr
+
+	.type	__88sv331x_proc_info,#object
+__88sv331x_proc_info:
+	.long	0x56158000			@ Marvell 88SV331x (MOHAWK)
+	.long	0xfffff000
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__mohawk_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_mohawk_name
+	.long	mohawk_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	v4wb_user_fns
+	.long	mohawk_cache_fns
+	.size	__88sv331x_proc_info, . - __88sv331x_proc_info
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index cefc21c2eee..d805a52b503 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -18,15 +18,14 @@
 #include <linux/mm.h>
 #include <linux/uaccess.h>
 #include <asm/ptrace.h>
-
-#include "../kernel/stacktrace.h"
+#include <asm/stacktrace.h>
 
 static int report_trace(struct stackframe *frame, void *d)
 {
 	unsigned int *depth = d;
 
 	if (*depth) {
-		oprofile_add_trace(frame->lr);
+		oprofile_add_trace(frame->pc);
 		(*depth)--;
 	}
 
@@ -70,9 +69,12 @@ void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 	struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
 
 	if (!user_mode(regs)) {
-		unsigned long base = ((unsigned long)regs) & ~(THREAD_SIZE - 1);
-		walk_stackframe(regs->ARM_fp, base, base + THREAD_SIZE,
-				report_trace, &depth);
+		struct stackframe frame;
+		frame.fp = regs->ARM_fp;
+		frame.sp = regs->ARM_sp;
+		frame.lr = regs->ARM_lr;
+		frame.pc = regs->ARM_pc;
+		walk_stackframe(&frame, report_trace, &depth);
 		return;
 	}
 
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 9cc2b16fdf7..17d0e9906d5 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -3,7 +3,7 @@ if ARCH_MXC
 menu "Freescale MXC Implementations"
 
 choice
-	prompt "MXC/iMX Base Type"
+	prompt "Freescale CPU family:"
 	default ARCH_MX3
 
 config ARCH_MX1
@@ -15,12 +15,14 @@ config ARCH_MX1
 config ARCH_MX2
 	bool "MX2-based"
 	select CPU_ARM926T
+	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
+	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
@@ -43,4 +45,10 @@ config MXC_IRQ_PRIOR
 	  requirements for timing.
 	  Say N here, unless you have a specialized requirement.
 
+config MXC_PWM
+	tristate "Enable PWM driver"
+	depends on ARCH_MXC
+	help
+	  Enable support for the i.MX PWM controller(s).
+
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index db74a929179..564fd4ebf38 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,8 @@
 #
 
 # Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o
+obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_MXC_PWM)  += pwm.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 0a38f0b396e..92e13566cd4 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -48,6 +48,11 @@ static DEFINE_MUTEX(clocks_mutex);
  *-------------------------------------------------------------------------*/
 
 /*
+ * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
+ * MXC architectures have switched to using clkdev.
+ */
+#ifndef CONFIG_COMMON_CLKDEV
+/*
  * Retrieve a clock by name.
  *
  * Note that we first try to use device id on the bus
@@ -110,6 +115,7 @@ found:
 	return clk;
 }
 EXPORT_SYMBOL(clk_get);
+#endif
 
 static void __clk_disable(struct clk *clk)
 {
@@ -187,6 +193,7 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+#ifndef CONFIG_COMMON_CLKDEV
 /* Decrement the clock's module reference count */
 void clk_put(struct clk *clk)
 {
@@ -194,6 +201,7 @@ void clk_put(struct clk *clk)
 		module_put(clk->owner);
 }
 EXPORT_SYMBOL(clk_put);
+#endif
 
 /* Round the requested clock rate to the nearest supported
  * rate that is less than or equal to the requested rate.
@@ -257,6 +265,7 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
+#ifndef CONFIG_COMMON_CLKDEV
 /*
  * Add a new clock to the clock tree.
  */
@@ -327,4 +336,49 @@ static int __init mxc_setup_proc_entry(void)
 }
 
 late_initcall(mxc_setup_proc_entry);
+#endif /* CONFIG_PROC_FS */
+#endif
+
+/*
+ * Get the resulting clock rate from a PLL register value and the input
+ * frequency. PLLs with this register layout can at least be found on
+ * MX1, MX21, MX27 and MX31
+ *
+ *                  mfi + mfn / (mfd + 1)
+ *  f = 2 * f_ref * --------------------
+ *                        pd + 1
+ */
+unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
+{
+	long long ll;
+	int mfn_abs;
+	unsigned int mfi, mfn, mfd, pd;
+
+	mfi = (reg_val >> 10) & 0xf;
+	mfn = reg_val & 0x3ff;
+	mfd = (reg_val >> 16) & 0x3ff;
+	pd =  (reg_val >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	mfn_abs = mfn;
+
+#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
+	if (mfn >= 0x200) {
+		mfn |= 0xFFFFFE00;
+		mfn_abs = -mfn;
+	}
 #endif
+
+	freq *= 2;
+	freq /= pd + 1;
+
+	ll = (unsigned long long)freq * mfn_abs;
+
+	do_div(ll, mfd + 1);
+	if (mfn < 0)
+		ll = -ll;
+	ll = (freq * mfi) + ll;
+
+	return ll;
+}
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c
new file mode 100644
index 00000000000..386e0d52cf5
--- /dev/null
+++ b/arch/arm/plat-mxc/cpu.c
@@ -0,0 +1,11 @@
+
+#include <linux/module.h>
+
+unsigned int __mxc_cpu_type;
+EXPORT_SYMBOL(__mxc_cpu_type);
+
+void mxc_set_cpu_type(unsigned int type)
+{
+	__mxc_cpu_type = type;
+}
+
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index c66748267c4..56f2fb5cc45 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <mach/common.h>
 
 int __init mxc_register_device(struct platform_device *pdev, void *data)
 {
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 2905ec75875..e364a5ed10f 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -113,7 +113,7 @@ struct imx_dma_channel {
 	void (*err_handler) (int, void *, int errcode);
 	void (*prog_handler) (int, void *, struct scatterlist *);
 	void *data;
-	unsigned int  dma_mode;
+	unsigned int dma_mode;
 	struct scatterlist *sg;
 	unsigned int resbytes;
 	int dma_num;
@@ -802,7 +802,7 @@ static int __init imx_dma_init(void)
 	int ret = 0;
 	int i;
 
-	dma_clk = clk_get(NULL, "dma_clk");
+	dma_clk = clk_get(NULL, "dma");
 	clk_enable(dma_clk);
 
 	/* reset DMA module */
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index ccbd94adc66..c6483bad8a2 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -200,8 +200,8 @@ static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 static int mxc_gpio_direction_output(struct gpio_chip *chip,
 				     unsigned offset, int value)
 {
-	_set_gpio_direction(chip, offset, 1);
 	mxc_gpio_set(chip, offset, value);
+	_set_gpio_direction(chip, offset, 1);
 	return 0;
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 8f34a05afc8..1cac9d1135c 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -48,7 +48,8 @@
  * Base address of PBC controller, CS4
  */
 #define PBC_BASE_ADDRESS        0xEB000000
-#define PBC_REG_ADDR(offset)    (PBC_BASE_ADDRESS + (offset))
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
 
 /*
  * PBC Interupt name definitions
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 451d510d08c..318c72ada13 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
 #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
 
+#include <mach/hardware.h>
+
 /* Base address of PBC controller */
 #define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
 /* Offsets for the PBC Controller register */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
new file mode 100644
index 00000000000..f8aef1babb7
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31moboard_boards {
+	MX31NOBOARD	= 0,
+	MX31DEVBOARD	= 1,
+	MX31MARXBOT	= 2,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31moboard_devboard_init(void);
+extern void mx31moboard_marxbot_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
new file mode 100644
index 00000000000..4ff762dd45c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
+#define __ASM_ARCH_MXC_BOARD_QONG_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+/* NOR FLASH */
+#define QONG_NOR_SIZE		(128*1024*1024)
+
+#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/clkdev.h b/arch/arm/plat-mxc/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index d21f78e7881..43a82d0c534 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -26,9 +26,13 @@
 struct module;
 
 struct clk {
+#ifndef CONFIG_COMMON_CLKDEV
+	/* As soon as i.MX1 and i.MX31 switched to clkdev, this
+	 * block can go away */
 	struct list_head node;
 	struct module *owner;
 	const char *name;
+#endif
 	int id;
 	/* Source clock this clk depends on */
 	struct clk *parent;
@@ -63,5 +67,7 @@ struct clk {
 int clk_register(struct clk *clk);
 void clk_unregister(struct clk *clk);
 
+unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
+
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 6350287a59b..b2f9b72644d 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -12,12 +12,18 @@
 #define __ASM_ARCH_MXC_COMMON_H__
 
 struct platform_device;
+struct clk;
 
 extern void mxc_map_io(void);
 extern void mxc_init_irq(void);
-extern void mxc_timer_init(const char *clk_timer);
-extern int mxc_clocks_init(unsigned long fref);
+extern void mxc_timer_init(struct clk *timer_clk);
+extern int mx1_clocks_init(unsigned long fref);
+extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx27_clocks_init(unsigned long fref);
+extern int mx31_clocks_init(unsigned long fref);
+extern int mx35_clocks_init(void);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
+extern void mxc_set_cpu_type(unsigned int type);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 602768b427e..4f773148bc2 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -31,6 +31,9 @@
 #ifdef CONFIG_MACH_MX31_3DS
 #include <mach/board-mx31pdk.h>
 #endif
+#ifdef CONFIG_MACH_QONG
+#include <mach/board-qong.h>
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a612d8bb73c..42e4ee37ca1 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -23,10 +23,16 @@
 #include <asm/sizes.h>
 
 #ifdef CONFIG_ARCH_MX3
-# include <mach/mx31.h>
+#include <mach/mx3x.h>
+#include <mach/mx31.h>
+#include <mach/mx35.h>
 #endif
 
 #ifdef CONFIG_ARCH_MX2
+# include <mach/mx2x.h>
+# ifdef CONFIG_MACH_MX21
+#  include <mach/mx21.h>
+# endif
 # ifdef CONFIG_MACH_MX27
 #  include <mach/mx27.h>
 # endif
diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 870d0d93961..762a7b0430e 100644
--- a/arch/arm/mach-imx/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,6 +76,9 @@ struct imx_fb_platform_data {
 	u_char * fixed_screen_cpu;
 	dma_addr_t fixed_screen_dma;
 
+	int (*init)(struct platform_device*);
+	int (*exit)(struct platform_device*);
+
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
 };
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
deleted file mode 100644
index 95a383be628..00000000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef _MXC_GPIO_MX1_MX2_H
-#define _MXC_GPIO_MX1_MX2_H
-
-#include <linux/io.h>
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x)    (0x00 + ((x) << 8))
-#define MXC_OCR1(x)    (0x04 + ((x) << 8))
-#define MXC_OCR2(x)    (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x)      (0x1c + ((x) << 8))
-#define MXC_GIUS(x)    (0x20 + ((x) << 8))
-#define MXC_SSR(x)     (0x24 + ((x) << 8))
-#define MXC_ICR1(x)    (0x28 + ((x) << 8))
-#define MXC_ICR2(x)    (0x2c + ((x) << 8))
-#define MXC_IMR(x)     (0x30 + ((x) << 8))
-#define MXC_ISR(x)     (0x34 + ((x) << 8))
-#define MXC_GPR(x)     (0x38 + ((x) << 8))
-#define MXC_SWR(x)     (0x3c + ((x) << 8))
-#define MXC_PUEN(x)    (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX  3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX  5
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT   (1 << 8)
-#define GPIO_IN    (0 << 8)
-#define GPIO_PUEN  (1 << 9)
-
-#define GPIO_PF    (1 << 10)
-#define GPIO_AF    (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-/*-------------------------------------------------------------------------*/
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#ifdef CONFIG_ARCH_MX1
-#define PA0_AIN_SPI2_CLK     (GPIO_PORTA | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC  (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD    (GPIO_PORTA | GPIO_IN | 1)
-#define PA1_PF_TIN           (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0          (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
-#define PA3_PF_CSI_MCLK      (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0        (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1        (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2        (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3        (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4        (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5        (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6       (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7       (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC    (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC    (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK   (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_I2C_SCL      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS     (GPIO_PORTA | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0           (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4          (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5          (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16          (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17          (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18          (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19          (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20          (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21          (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22          (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23          (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK  (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO        (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1       (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9)
-#define PB9_AF_MS_PI1        (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2      (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10)
-#define PB10_AF_MS_SCLKI     (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3      (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO      (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK       (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0     (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS        (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS     (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK    (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT    (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
-#define PB17_AF_SSI_TXDAT    (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
-#define PB18_AF_SSI_TXFS     (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK    (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE     (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE      (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PFUSBD_RCV      (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND  (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP      (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM      (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO     (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO     (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
-#define PB29_PF_UART2_RTS    (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
-#define PB30_PF_UART2_TXD    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
-#define PB31_PF_UART2_RXD    (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
-#define PC3_PF_SSI_RXFS      (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK     (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT     (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
-#define PC6_PF_SSI_TXDAT     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
-#define PC7_PF_SSI_TXFS      (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK     (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_UART1_RTS    (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
-#define PC11_PF_UART1_TXD    (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_UART1_RXD    (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
-#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK    (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS      (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO    (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI    (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI    (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
-#define PC25_BIN_UART3_DSR   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
-#define PC26_AOUT_UART3_DTR  (GPIO_PORTC | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
-#define PC28_BIN_UART3_CTS   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
-#define PC29_AOUT_UART3_RTS  (GPIO_PORTC | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX    (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX   (GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
-#define PD7_PF_REV           (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR     (GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
-#define PD7_AIN_SPI2_SCLK    (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS           (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD     (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
-#define PD8_AIN_SPI2_SS      (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS            (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI      (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
-#define PD9_AOUT_SPI2_RXD    (GPIO_PORTD | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR      (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
-#define PD10_AF_UART2_DSR    (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
-#define PD10_AIN_SPI2_TXD    (GPIO_PORTD | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
-#define PD12_PF_ACD_OE       (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
-#define PD13_PF_LP_HSYNC     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
-#define PD14_PF_FLM_VSYNC    (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
-#define PD15_PF_LD0          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
-#define PD16_PF_LD1          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
-#define PD17_PF_LD2          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_LD3          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_PF_LD4          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
-#define PD20_PF_LD5          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
-#define PD21_PF_LD6          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
-#define PD22_PF_LD7          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
-#define PD23_PF_LD8          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
-#define PD24_PF_LD9          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
-#define PD25_PF_LD10         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
-#define PD26_PF_LD11         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
-#define PD27_PF_LD12         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
-#define PD28_PF_LD13         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
-#define PD29_PF_LD14         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
-#define PD30_PF_LD15         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
-#define PD31_PF_TMR2OUT      (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD    (GPIO_PORTD | GPIO_BIN | 31)
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-#define PA0_PF_USBH2_CLK	(GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR	(GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7	(GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT	(GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP	(GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
-#define PA6_PF_LD0		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
-#define PA7_PF_LD1		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
-#define PA8_PF_LD2		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
-#define PA9_PF_LD3		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
-#define PA10_PF_LD4		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
-#define PA11_PF_LD5		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
-#define PA12_PF_LD6		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
-#define PA13_PF_LD7		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
-#define PA14_PF_LD8		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
-#define PA15_PF_LD9		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_LD10		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_PF_LD11		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
-#define PA18_PF_LD12		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
-#define PA19_PF_LD13		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
-#define PA20_PF_LD14		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
-#define PA21_PF_LD15		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
-#define PA22_PF_LD16		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
-#define PA23_PF_LD17		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
-#define PA24_PF_REV		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
-#define PA25_PF_CLS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
-#define PA26_PF_PS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
-#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
-#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
-#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
-#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
-#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
-#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF |  4)
-#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF |  5)
-#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF |  6)
-#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF |  7)
-#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF |  8)
-#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF |  9)
-#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
-#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
-#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
-#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 11)
-#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
-#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
-#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
-#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 13)
-#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
-#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
-#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
-#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
-#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
-#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
-#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
-#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 19)
-#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
-#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
-#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
-#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 21)
-#define PB22_PF_USBH1_SUSP	(GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USB_PWR		(GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC_B	(GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBH1_RCV	(GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBH1_FS	(GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE_B	(GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM	(GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP	(GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM	(GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP	(GPIO_PORTB | GPIO_PF | 31)
-#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_PF | 26)
-#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
-#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
-#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 31)
-#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 5)
-#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 6)
-#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
-#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
-#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
-#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
-#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
-#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 16)
-#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 17)
-#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 18)
-#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 19)
-#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 20)
-#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 21)
-#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 22)
-#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 23)
-#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 24)
-#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 25)
-#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 26)
-#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 27)
-#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 28)
-#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 29)
-#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 30)
-#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 31)
-#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
-#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
-#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
-#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
-#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
-#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
-#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
-#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
-#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
-#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
-#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
-#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
-#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
-#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
-#define PD14_AOUT_FEC_CLR	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
-#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
-#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
-#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_AF_USBH2_DATA4	(GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3	(GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6	(GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0	(GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2	(GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1	(GPIO_PORTD | GPIO_AF | 24)
-#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 25)
-#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 26)
-#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
-#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 27)
-#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 28)
-#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 29)
-#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_IN | GPIO_PF  | 30)
-#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 31)
-#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
-#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
-#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
-#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
-#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
-#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
-#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
-#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 7)
-#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
-#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 9)
-#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
-#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 11)
-#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
-#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 13)
-#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
-#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
-#define PE16_AF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
-#define PE16_PF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
-#define PE18_PF_SDHC1_D0	(GPIO_PORTE | GPIO_PF | 18)
-#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_IN  | GPIO_AF | 18)
-#define PE19_PF_SDHC1_D1	(GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SDHC1_D2	(GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SDHC1_D3	(GPIO_PORTE | GPIO_PF | 21)
-#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
-#define PE22_PF_SDHC1_CMD	(GPIO_PORTE | GPIO_PF | 22)
-#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
-#define PE22_PF_SDHC1_CLK	(GPIO_PORTE | GPIO_PF | 23)
-#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
-#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
-#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
-#endif
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
-
-#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
new file mode 100644
index 00000000000..bf23305c19c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
@@ -0,0 +1,166 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX1_H
+#define _MXC_IOMUX_MX1_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/* FIXME: This list is not completed. The correct directions are
+* missing on some (many) pins
+*/
+
+
+/* Primary GPIO pin functions */
+
+#define PA0_AIN_SPI2_CLK        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC     (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD       (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN              (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK         (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0           (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1           (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2           (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3           (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4           (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5           (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6          (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7          (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC       (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC       (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK      (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4    (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5    (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6    (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7    (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0              (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4             (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5             (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16             (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0    (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17             (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1    (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18             (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2    (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19             (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3    (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20             (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0    (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21             (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1    (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22             (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2    (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23             (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK     (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO           (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1           (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2         (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI        (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3         (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO         (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK          (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0        (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS           (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS        (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK       (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT       (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS        (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK       (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE        (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE         (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV        (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND     (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP         (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM         (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO        (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO        (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS       (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD       (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS         (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK        (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT        (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS         (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK        (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS       (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD       (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD       (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY    (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK       (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS         (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO       (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI       (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI       (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX       (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV              (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR        (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK       (GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS              (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD        (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS         (GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS               (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI         (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR       (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE          (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT         (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD       (GPIO_PORTD | GPIO_BIN | 31)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
new file mode 100644
index 00000000000..63aaa972e27
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
@@ -0,0 +1,126 @@
+/*
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX21_H
+#define _MXC_IOMUX_MX21_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PB22_PF_USBH1_BYP       (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON        (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA       (GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL       (GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON        (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS        (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE        (GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM     (GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP     (GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM     (GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP     (GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS          (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD         (GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD         (GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK         (GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2         (GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1         (GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0         (GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE             (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0            (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1            (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2            (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3           (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4           (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5           (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6           (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7           (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES             (GPIO_PORTF | GPIO_PF | 16)
+
+/* Alternate GPIO pin functions */
+
+#define PA5_AF_BMI_CLK_CS       (GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0           (GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1           (GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2           (GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3           (GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4          (GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5          (GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6          (GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7          (GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8          (GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9          (GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10         (GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11         (GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12         (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13         (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14         (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15         (GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ    (GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE       (GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL     (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ        (GPIO_PORTA | GPIO_AF | 30)
+
+/* AIN GPIO pin functions */
+
+#define PC14_AIN_SYS_CLK        (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD          (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+
+/* BIN GPIO pin functions */
+
+#define PC14_BIN_SYS_CLK        (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+
+/* CIN GPIO pin functions */
+
+#define PB26_CIN_USBH1_RXDAT    (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+
+/* AOUT GPIO pin functions */
+
+#define PA29_AOUT_BMI_WAIT      (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT  (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD         (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY      (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT       (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
new file mode 100644
index 00000000000..5ac158b70f6
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
@@ -0,0 +1,207 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX27_H
+#define _MXC_IOMUX_MX27_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PA0_PF_USBH2_CLK        (GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR        (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7      (GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT        (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP        (GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP      (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV       (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA         (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL         (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PC25_AF_GPT5_TIN        (GPIO_PORTC | GPIO_AF | 25)
+#define PC27_AF_GPT4_TIN        (GPIO_PORTC | GPIO_AF | 27)
+#define PD0_PF_SD3_CMD          (GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK          (GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0        (GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1        (GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2        (GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3        (GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4        (GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5        (GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6        (GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7        (GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8       (GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9       (GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10      (GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11      (GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12      (GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13      (GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14      (GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK      (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7    (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE             (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE           (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW            (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16        (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST          (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2         (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1         (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2          (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1          (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON        (GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY        (GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT         (GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2          (GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1          (GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15      (GPIO_PORTF | GPIO_PF | 23)
+
+/* Alternate GPIO pin functions */
+
+#define PB4_AF_MSHC_DATA0       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS          (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK        (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO         (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT       (GPIO_PORTC | GPIO_AF | 24)
+#define PC26_AF_GPT4_TOUT       (GPIO_PORTC | GPIO_AF | 26)
+#define PD1_AF_ETMTRACE_PKT15   (GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14   (GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13   (GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12   (GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0           (GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1           (GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2           (GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3           (GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO         (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11  (GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10  (GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9   (GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8   (GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7   (GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6   (GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5   (GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0    (GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2    (GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11    (GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN    (GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY        (GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ        (GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET       (GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK       (GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ      (GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0         (GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1         (GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC   (GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2         (GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0         (GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1         (GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW        (GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR        (GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK    (GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4   (GPIO_PORTF | GPIO_AF | 23)
+
+/* AIN GPIO pin functions */
+
+#define PC14_AIN_SSI1_MCLK      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC         (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER      (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN      (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+
+/* BIN GPIO pin functions */
+
+#define PC14_BIN_SSI2_MCLK      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+
+/* CIN GPIO pin functions */
+
+#define PD2_CIN_SLCDC1_DAT0     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT  (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
+
+/* AOUT GPIO pin functions */
+
+#define PC14_AOUT_GPT6_TIN      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV     (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+
+#define PC17_BOUT_PC_IOIS16     (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1        (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY      (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+
+
+#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
new file mode 100644
index 00000000000..fb5ae638e79
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -0,0 +1,237 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX2x_H
+#define _MXC_IOMUX_MX2x_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PA5_PF_LSCLK            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST        (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD          (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0           (GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1           (GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2           (GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3           (GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD          (GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK          (GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK        (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK      (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR         (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC          (GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS        (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE        (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM      (GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP      (GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM      (GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP      (GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT            (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN             (GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2       (GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1       (GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0       (GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK      (GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO      (GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI      (GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO      (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS        (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO             (GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD       (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK            (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT       (GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0          (GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1          (GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2          (GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3          (GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD         (GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK         (GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB             (GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP             (GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE            (GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE             (GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE             (GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO            (GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4             (GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5             (GPIO_PORTF | GPIO_PF | 22)
+
+/* Alternate GPIO pin functions */
+
+#define PB26_AF_UART4_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0       (GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS       (GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS       (GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK      (GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4     (GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3     (GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6     (GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0     (GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2     (GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1     (GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7          (GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE           (GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO      (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS        (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+
+/* AIN GPIO pin functions */
+
+#define PA6_AIN_SLCDC1_DAT0     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK      (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT       (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+
+/* BIN GPIO pin functions */
+
+#define PE5_BIN_TOUT2           (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+
+/* CIN GPIO pin functions */
+
+#define PA14_CIN_SLCDC1_DAT0    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS      (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3           (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+
+/* AOUT GPIO pin functions */
+
+#define PB29_AOUT_UART4_RXD     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
+#define PC15_AOUT_WKGD          (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index c9198c0aea1..ab838cfe94f 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -92,7 +92,7 @@ enum iomux_gp_func {
 	MUX_EXTDMAREQ2_MBX_SEL		= 1 << 15,
 	MUX_TAMPER_DETECT_EN		= 1 << 16,
 	MUX_PGP_USB_4WIRE		= 1 << 17,
-	MUX_PGB_USB_COMMON		= 1 << 18,
+	MUX_PGP_USB_COMMON		= 1 << 18,
 	MUX_SDHC_MEMSTICK1		= 1 << 19,
 	MUX_SDHC_MEMSTICK2		= 1 << 20,
 	MUX_PGP_SPLL_BYP		= 1 << 21,
@@ -109,21 +109,44 @@ enum iomux_gp_func {
 };
 
 /*
- * This function enables/disables the general purpose function for a particular
- * signal.
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
  */
-void iomux_config_gpr(enum iomux_gp_func , bool);
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label);
 
 /*
- * set the mode for a IOMUX pin.
+ * releases a single pin:
+ * 	- make it available for a future use by another driver
+ * 	- frees the GPIO if the pin was configured as GPIO
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
  */
-int mxc_iomux_mode(unsigned int);
+void mxc_iomux_release_pin(const unsigned int pin);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
 
 /*
  * This function enables/disables the general purpose function for a particular
  * signal.
  */
-void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
+void mxc_iomux_set_gpr(enum iomux_gp_func, bool en);
+
+/*
+ * This function only configures the iomux hardware.
+ * It is called by the setup functions and should not be called directly anymore.
+ * It is here visible for backward compatibility
+ */
+int mxc_iomux_mode(unsigned int pin_mode);
 
 #define IOMUX_PADNUM_MASK	0x1ff
 #define IOMUX_GPIONUM_SHIFT	9
@@ -144,6 +167,11 @@ void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
 	MXC_GPIO_IRQ_START)
 
 /*
+ * The number of gpio devices among the pads
+ */
+#define GPIO_PORT_MAX 3
+
+/*
  * This enumeration is constructed based on the Section
  * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
  * value is constructed based on the rules described above.
@@ -480,6 +508,9 @@ enum iomux_pins {
 	MX31_PIN_CAPTURE	= IOMUX_PIN( 7,   327),
 };
 
+#define PIN_MAX 327
+#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */
+
 /*
  * Convenience values for use with mxc_iomux_mode()
  *
@@ -507,7 +538,9 @@ enum iomux_pins {
 #define MX31_PIN_CSPI1_SS1__SS1		IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI1_SS2__SS2		IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI2_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MOSI__SCL	IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI2_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MISO__SDA	IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI2_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI2_SS0__SS0		IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
@@ -525,6 +558,33 @@ enum iomux_pins {
 #define MX31_PIN_SD1_DATA0__SD1_DATA0	IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CLK__SD1_CLK	IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CMD__SD1_CMD	IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD0__LD0		IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD1__LD1		IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD2__LD2		IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD3__LD3		IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD4__LD4		IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD5__LD5		IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD6__LD6		IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD7__LD7		IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD8__LD8		IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD9__LD9		IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD10__LD10		IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD11__LD11		IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD12__LD12		IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD13__LD13		IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD14__LD14		IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD15__LD15		IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD16__LD16		IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD17__LD17		IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_VSYNC3__VSYNC3		IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_HSYNC__HSYNC		IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_FPSHIFT__FPSHIFT	IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DRDY0__DRDY0		IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_REV__D3_REV		IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CONTRAST__CONTRAST	IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
new file mode 100644
index 00000000000..171f8adc110
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -0,0 +1,127 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_H
+#define _MXC_IOMUX_H
+
+/*
+*  GPIO Module and I/O Multiplexer
+*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
+#define MXC_DDIR(x)    (0x00 + ((x) << 8))
+#define MXC_OCR1(x)    (0x04 + ((x) << 8))
+#define MXC_OCR2(x)    (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x)      (0x1c + ((x) << 8))
+#define MXC_GIUS(x)    (0x20 + ((x) << 8))
+#define MXC_SSR(x)     (0x24 + ((x) << 8))
+#define MXC_ICR1(x)    (0x28 + ((x) << 8))
+#define MXC_ICR2(x)    (0x2c + ((x) << 8))
+#define MXC_IMR(x)     (0x30 + ((x) << 8))
+#define MXC_ISR(x)     (0x34 + ((x) << 8))
+#define MXC_GPR(x)     (0x38 + ((x) << 8))
+#define MXC_SWR(x)     (0x3c + ((x) << 8))
+#define MXC_PUEN(x)    (0x40 + ((x) << 8))
+
+#ifdef CONFIG_ARCH_MX1
+# define GPIO_PORT_MAX  3
+#endif
+#ifdef CONFIG_ARCH_MX2
+# define GPIO_PORT_MAX  5
+#endif
+
+#ifndef GPIO_PORT_MAX
+# error "GPIO config port count unknown!"
+#endif
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT   (1 << 8)
+#define GPIO_IN    (0 << 8)
+#define GPIO_PUEN  (1 << 9)
+
+#define GPIO_PF    (1 << 10)
+#define GPIO_AF    (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
+
+
+#ifdef CONFIG_ARCH_MX1
+#include <mach/iomux-mx1.h>
+#endif
+#ifdef CONFIG_ARCH_MX2
+#include <mach/iomux-mx2x.h>
+#ifdef CONFIG_MACH_MX21
+#include <mach/iomux-mx21.h>
+#endif
+#ifdef CONFIG_MACH_MX27
+#include <mach/iomux-mx27.h>
+#endif
+#endif
+
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+
+
+extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+	const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 0b808399097..e0783e61958 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -14,7 +14,12 @@
 #if defined CONFIG_ARCH_MX1
 #define PHYS_OFFSET		UL(0x08000000)
 #elif defined CONFIG_ARCH_MX2
+#ifdef CONFIG_MACH_MX21
+#define PHYS_OFFSET		UL(0xC0000000)
+#endif
+#ifdef CONFIG_MACH_MX27
 #define PHYS_OFFSET		UL(0xA0000000)
+#endif
 #elif defined CONFIG_ARCH_MX3
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
new file mode 100644
index 00000000000..e8c4cf56c24
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
+ *
+ * This contains i.MX21-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX21_H__
+#define __ASM_ARCH_MXC_MX21_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR         0xC0000000
+#define CSD1_BASE_ADDR          0xC4000000
+
+#define CS0_BASE_ADDR           0xC8000000
+#define CS1_BASE_ADDR           0xCC000000
+#define CS2_BASE_ADDR           0xD0000000
+#define CS3_BASE_ADDR           0xD1000000
+#define CS4_BASE_ADDR           0xD2000000
+#define CS5_BASE_ADDR           0xDD000000
+#define PCMCIA_MEM_BASE_ADDR    0xD4000000
+
+/* NAND, SDRAM, WEIM etc controllers */
+#define X_MEMC_BASE_ADDR        0xDF000000
+#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
+#define X_MEMC_SIZE             SZ_256K
+
+#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x0000)
+#define EIM_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x1000)
+#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x2000)
+#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x3000)
+
+#define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
+
+/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
+#define ARCH_NR_GPIOS		(6*32 + 16)
+
+/* fixed interrupt numbers */
+#define MXC_INT_USBCTRL         58
+#define MXC_INT_USBCTRL         58
+#define MXC_INT_USBMNP          57
+#define MXC_INT_USBFUNC         56
+#define MXC_INT_USBHOST         55
+#define MXC_INT_USBDMA          54
+#define MXC_INT_USBWKUP         53
+#define MXC_INT_EMMADEC         50
+#define MXC_INT_EMMAENC         49
+#define MXC_INT_BMI             30
+#define MXC_INT_FIRI            9
+
+/* fixed DMA request numbers */
+#define DMA_REQ_BMI_RX          29
+#define DMA_REQ_BMI_TX          28
+#define DMA_REQ_FIRI_RX         4
+
+#endif /* __ASM_ARCH_MXC_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 0313be72055..6e93f2c0b7b 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -2,6 +2,10 @@
  * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  *
+ * This contains i.MX27-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
@@ -27,35 +31,6 @@
 /* IRAM */
 #define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
 
-/* Register offests */
-#define AIPI_BASE_ADDR          0x10000000
-#define AIPI_BASE_ADDR_VIRT     0xF4000000
-#define AIPI_SIZE               SZ_1M
-
-#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
-
-#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
 #define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
 #define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
 #define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
@@ -64,55 +39,24 @@
 #define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
 #define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
 #define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
-
-#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
 #define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
-#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
-/* for mx27*/
 #define OTG_BASE_ADDR           USBOTG_BASE_ADDR
 #define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
 #define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
-
 #define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
 #define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
 #define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
 #define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
 #define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
 
-#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
-
-/* ROMP and AVIC */
+/* ROM patch */
 #define ROMP_BASE_ADDR          0x10041000
 
-#define AVIC_BASE_ADDR          0x10040000
-
-#define SAHB1_BASE_ADDR         0x80000000
-#define SAHB1_BASE_ADDR_VIRT    0xF4100000
-#define SAHB1_SIZE              SZ_1M
-
-#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
 #define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
 
-/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR        0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_1M
-
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
-
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR		0xA0000000
-#define CSD1_BASE_ADDR		0xB0000000
+#define SDRAM_BASE_ADDR         0xA0000000
+#define CSD1_BASE_ADDR          0xB0000000
 
 #define CS0_BASE_ADDR           0xC0000000
 #define CS1_BASE_ADDR           0xC8000000
@@ -122,44 +66,20 @@
 #define CS5_BASE_ADDR           0xD6000000
 #define PCMCIA_MEM_BASE_ADDR    0xDC000000
 
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(void __iomem *) \
-	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
-		AIPI_IO_ADDRESS(x) : \
-	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
-		SAHB1_IO_ADDRESS(x) : \
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
-		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
-
-/* define the address mapping macros: in physical address order */
-#define AIPI_IO_ADDRESS(x)  \
-	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)	AIPI_IO_ADDRESS(x)
-
-#define SAHB1_IO_ADDRESS(x)  \
-	(((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
+#define X_MEMC_BASE_ADDR        0xD8000000
+#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
+#define X_MEMC_SIZE             SZ_1M
 
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
+#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
+#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
 
-/* fixed interrput numbers */
+/* fixed interrupt numbers */
 #define MXC_INT_CCM		63
 #define MXC_INT_IIM		62
-#define MXC_INT_LCDC		61
-#define MXC_INT_SLCDC		60
 #define MXC_INT_SAHARA		59
 #define MXC_INT_SCC_SCM		58
 #define MXC_INT_SCC_SMN		57
@@ -167,54 +87,12 @@
 #define MXC_INT_USB2		55
 #define MXC_INT_USB1		54
 #define MXC_INT_VPU		53
-#define MXC_INT_EMMAPP		52
-#define MXC_INT_EMMAPRP		51
 #define MXC_INT_FEC		50
 #define MXC_INT_UART5		49
 #define MXC_INT_UART6		48
-#define MXC_INT_DMACH15		47
-#define MXC_INT_DMACH14		46
-#define MXC_INT_DMACH13		45
-#define MXC_INT_DMACH12		44
-#define MXC_INT_DMACH11		43
-#define MXC_INT_DMACH10		42
-#define MXC_INT_DMACH9		41
-#define MXC_INT_DMACH8		40
-#define MXC_INT_DMACH7		39
-#define MXC_INT_DMACH6		38
-#define MXC_INT_DMACH5		37
-#define MXC_INT_DMACH4		36
-#define MXC_INT_DMACH3		35
-#define MXC_INT_DMACH2		34
-#define MXC_INT_DMACH1		33
-#define MXC_INT_DMACH0		32
-#define MXC_INT_CSI		31
 #define MXC_INT_ATA		30
-#define MXC_INT_NANDFC		29
-#define MXC_INT_PCMCIA		28
-#define MXC_INT_WDOG		27
-#define MXC_INT_GPT1		26
-#define MXC_INT_GPT2		25
-#define MXC_INT_GPT3		24
-#define MXC_INT_GPT		INT_GPT1
-#define MXC_INT_PWM		23
-#define MXC_INT_RTC		22
-#define MXC_INT_KPP		21
-#define MXC_INT_UART1		20
-#define MXC_INT_UART2		19
-#define MXC_INT_UART3		18
-#define MXC_INT_UART4		17
-#define MXC_INT_CSPI1		16
-#define MXC_INT_CSPI2		15
-#define MXC_INT_SSI1		14
-#define MXC_INT_SSI2		13
-#define MXC_INT_I2C		12
-#define MXC_INT_SDHC1		11
-#define MXC_INT_SDHC2		10
 #define MXC_INT_SDHC3		9
-#define MXC_INT_GPIO		8
 #define MXC_INT_SDHC		7
-#define MXC_INT_CSPI3		6
 #define MXC_INT_RTIC		5
 #define MXC_INT_GPT4		4
 #define MXC_INT_GPT5		3
@@ -228,36 +106,9 @@
 #define DMA_REQ_UART6_TX        34
 #define DMA_REQ_UART5_RX        33
 #define DMA_REQ_UART5_TX        32
-#define DMA_REQ_CSI_RX          31
-#define DMA_REQ_CSI_STAT        30
 #define DMA_REQ_ATA_RCV         29
 #define DMA_REQ_ATA_TX          28
-#define DMA_REQ_UART1_TX        27
-#define DMA_REQ_UART1_RX        26
-#define DMA_REQ_UART2_TX        25
-#define DMA_REQ_UART2_RX        24
-#define DMA_REQ_UART3_TX        23
-#define DMA_REQ_UART3_RX        22
-#define DMA_REQ_UART4_TX        21
-#define DMA_REQ_UART4_RX        20
-#define DMA_REQ_CSPI1_TX        19
-#define DMA_REQ_CSPI1_RX        18
-#define DMA_REQ_CSPI2_TX        17
-#define DMA_REQ_CSPI2_RX        16
-#define DMA_REQ_SSI1_TX1        15
-#define DMA_REQ_SSI1_RX1        14
-#define DMA_REQ_SSI1_TX0        13
-#define DMA_REQ_SSI1_RX0        12
-#define DMA_REQ_SSI2_TX1        11
-#define DMA_REQ_SSI2_RX1        10
-#define DMA_REQ_SSI2_TX0        9
-#define DMA_REQ_SSI2_RX0        8
-#define DMA_REQ_SDHC1           7
-#define DMA_REQ_SDHC2           6
 #define DMA_REQ_MSHC            4
-#define DMA_REQ_EXT             3
-#define DMA_REQ_CSPI3_TX        2
-#define DMA_REQ_CSPI3_RX        1
 
 /* silicon revisions specific to i.MX27 */
 #define CHIP_REV_1_0		0x00
@@ -267,25 +118,8 @@
 extern int mx27_revision(void);
 #endif
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* Mandatory defines used globally */
 
-/* this is an i.MX27 CPU */
-#define cpu_is_mx27()		(1)
-
 /* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
 #define ARCH_NR_GPIOS		(192 + 16)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
new file mode 100644
index 00000000000..fc40d3ab8c5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This contains hardware definitions that are common between i.MX21 and
+ * i.MX27.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX2x_H__
+#define __ASM_ARCH_MXC_MX2x_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* The following addresses are common between i.MX21 and i.MX27 */
+
+/* Register offests */
+#define AIPI_BASE_ADDR          0x10000000
+#define AIPI_BASE_ADDR_VIRT     0xF4000000
+#define AIPI_SIZE               SZ_1M
+
+#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
+#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
+#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
+#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
+#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
+#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
+#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
+#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
+#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
+#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
+#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
+#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
+#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
+#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
+#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
+#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
+#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
+#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
+#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
+#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
+#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
+#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
+#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
+#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
+#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
+#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
+#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
+#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
+#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
+#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
+#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
+#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
+
+#define AVIC_BASE_ADDR          0x10040000
+
+#define SAHB1_BASE_ADDR         0x80000000
+#define SAHB1_BASE_ADDR_VIRT    0xF4100000
+#define SAHB1_SIZE              SZ_1M
+
+#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
+
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(void __force __iomem *) \
+	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
+		AIPI_IO_ADDRESS(x) : \
+	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+		SAHB1_IO_ADDRESS(x) : \
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
+
+/* define the address mapping macros: in physical address order */
+#define AIPI_IO_ADDRESS(x)  \
+	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)	AIPI_IO_ADDRESS(x)
+
+#define SAHB1_IO_ADDRESS(x)  \
+	(((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* fixed interrupt numbers */
+#define MXC_INT_LCDC		61
+#define MXC_INT_SLCDC		60
+#define MXC_INT_EMMAPP		52
+#define MXC_INT_EMMAPRP		51
+#define MXC_INT_DMACH15		47
+#define MXC_INT_DMACH14		46
+#define MXC_INT_DMACH13		45
+#define MXC_INT_DMACH12		44
+#define MXC_INT_DMACH11		43
+#define MXC_INT_DMACH10		42
+#define MXC_INT_DMACH9		41
+#define MXC_INT_DMACH8		40
+#define MXC_INT_DMACH7		39
+#define MXC_INT_DMACH6		38
+#define MXC_INT_DMACH5		37
+#define MXC_INT_DMACH4		36
+#define MXC_INT_DMACH3		35
+#define MXC_INT_DMACH2		34
+#define MXC_INT_DMACH1		33
+#define MXC_INT_DMACH0		32
+#define MXC_INT_CSI		31
+#define MXC_INT_NANDFC		29
+#define MXC_INT_PCMCIA		28
+#define MXC_INT_WDOG		27
+#define MXC_INT_GPT1		26
+#define MXC_INT_GPT2		25
+#define MXC_INT_GPT3		24
+#define MXC_INT_GPT		INT_GPT1
+#define MXC_INT_PWM		23
+#define MXC_INT_RTC		22
+#define MXC_INT_KPP		21
+#define MXC_INT_UART1		20
+#define MXC_INT_UART2		19
+#define MXC_INT_UART3		18
+#define MXC_INT_UART4		17
+#define MXC_INT_CSPI1		16
+#define MXC_INT_CSPI2		15
+#define MXC_INT_SSI1		14
+#define MXC_INT_SSI2		13
+#define MXC_INT_I2C		12
+#define MXC_INT_SDHC1		11
+#define MXC_INT_SDHC2		10
+#define MXC_INT_GPIO		8
+#define MXC_INT_CSPI3		6
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x1C
+#define GPIO_GDIR	 	0x00
+#define GPIO_PSR	 	0x24
+#define GPIO_ICR1	 	0x28
+#define GPIO_ICR2	 	0x2C
+#define GPIO_IMR	 	0x30
+#define GPIO_ISR	 	0x34
+#define GPIO_INT_LOW_LEV	0x3
+#define GPIO_INT_HIGH_LEV	0x2
+#define GPIO_INT_RISE_EDGE 	0x0
+#define GPIO_INT_FALL_EDGE	0x1
+#define GPIO_INT_NONE		0x4
+
+/* fixed DMA request numbers */
+#define DMA_REQ_CSI_RX          31
+#define DMA_REQ_CSI_STAT        30
+#define DMA_REQ_UART1_TX        27
+#define DMA_REQ_UART1_RX        26
+#define DMA_REQ_UART2_TX        25
+#define DMA_REQ_UART2_RX        24
+#define DMA_REQ_UART3_TX        23
+#define DMA_REQ_UART3_RX        22
+#define DMA_REQ_UART4_TX        21
+#define DMA_REQ_UART4_RX        20
+#define DMA_REQ_CSPI1_TX        19
+#define DMA_REQ_CSPI1_RX        18
+#define DMA_REQ_CSPI2_TX        17
+#define DMA_REQ_CSPI2_RX        16
+#define DMA_REQ_SSI1_TX1        15
+#define DMA_REQ_SSI1_RX1        14
+#define DMA_REQ_SSI1_TX0        13
+#define DMA_REQ_SSI1_RX0        12
+#define DMA_REQ_SSI2_TX1        11
+#define DMA_REQ_SSI2_RX1        10
+#define DMA_REQ_SSI2_TX0        9
+#define DMA_REQ_SSI2_RX0        8
+#define DMA_REQ_SDHC1           7
+#define DMA_REQ_SDHC2           6
+#define DMA_REQ_EXT             3
+#define DMA_REQ_CSPI3_TX        2
+#define DMA_REQ_CSPI3_RX        1
+
+#endif /* __ASM_ARCH_MXC_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index de026654b00..0b06941b613 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,360 +1,45 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/*
- * MX31 memory map:
- *
- * Virt		Phys		Size	What
- * ---------------------------------------------------------------------------
- * F8000000	1FFC0000	16K	IRAM
- * F9000000	30000000	256M	L2CC
- * FC000000	43F00000	1M	AIPS 1
- * FC100000	50000000	1M	SPBA
- * FC200000	53F00000	1M	AIPS 2
- * FC500000	60000000	128M	ROMPATCH
- * FC400000	68000000	128M	AVIC
- *         	70000000	256M	IPU (MAX M2)
- *         	80000000	256M	CSD0 SDRAM/DDR
- *         	90000000	256M	CSD1 SDRAM/DDR
- *         	A0000000	128M	CS0 Flash
- *         	A8000000	128M	CS1 Flash
- *         	B0000000	32M	CS2
- *         	B2000000	32M	CS3
- * F4000000	B4000000	32M	CS4
- *         	B6000000	32M	CS5
- * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
- *         	C0000000	64M	PCMCIA/CF
- */
-
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
-/*
  * IRAM
  */
-#define IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
-#define IRAM_BASE_ADDR_VIRT	0xF8000000
-#define IRAM_SIZE		SZ_16K
-
-/*
- * L2CC
- */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2CC_BASE_ADDR_VIRT	0xF9000000
-#define L2CC_SIZE		SZ_1M
-
-/*
- * AIPS 1
- */
-#define AIPS1_BASE_ADDR		0x43F00000
-#define AIPS1_BASE_ADDR_VIRT	0xFC000000
-#define AIPS1_SIZE		SZ_1M
+#define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define MX31_IRAM_SIZE			SZ_16K
 
-#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
 #define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
 #define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
-#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
 #define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
 #define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
-#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
-
-/*
- * SPBA global module enabled #0
- */
-#define SPBA0_BASE_ADDR 	0x50000000
-#define SPBA0_BASE_ADDR_VIRT	0xFC100000
-#define SPBA0_SIZE		SZ_1M
 
 #define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
 #define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
 #define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
 #define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
-#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define MSHC2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
 
-/*
- * AIPS 2
- */
-#define AIPS2_BASE_ADDR		0x53F00000
-#define AIPS2_BASE_ADDR_VIRT	0xFC200000
-#define AIPS2_SIZE		SZ_1M
-#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
 #define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
 #define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
-#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
 #define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
 #define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
-#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
 #define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
-#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
-
-/*
- * ROMP and AVIC
- */
-#define ROMP_BASE_ADDR		0x60000000
-#define ROMP_BASE_ADDR_VIRT	0xFC500000
-#define ROMP_SIZE		SZ_1M
-
-#define AVIC_BASE_ADDR		0x68000000
-#define AVIC_BASE_ADDR_VIRT	0xFC400000
-#define AVIC_SIZE		SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR	0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
-#define X_MEMC_SIZE		SZ_64K
 
-#define NFC_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x0000)
-#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+#define MX31_NFC_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x0000)
 
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(void __iomem *) \
-	(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
-	((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
-	((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
-	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
-	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
-	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
-	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
-	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
-	0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-
-#define IRAM_IO_ADDRESS(x)  \
-	(((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
-
-#define L2CC_IO_ADDRESS(x)  \
-	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x)  \
-	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x)  \
-	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x)  \
-	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x)  \
-	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)  \
-	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/*
- * Interrupt numbers
- */
-#define MXC_INT_PEN_ADS7843	0
-#define MXC_INT_RESV1		1
-#define MXC_INT_CS8900A		2
-#define MXC_INT_I2C3		3
-#define MXC_INT_I2C2		4
 #define MXC_INT_MPEG4_ENCODER	5
-#define MXC_INT_RTIC		6
 #define MXC_INT_FIRI		7
-#define MXC_INT_MMC_SDHC2	8
+#define MX31_INT_MMC_SDHC2	8
 #define MXC_INT_MMC_SDHC1	9
-#define MXC_INT_I2C		10
-#define MXC_INT_SSI2		11
-#define MXC_INT_SSI1		12
-#define MXC_INT_CSPI2		13
-#define MXC_INT_CSPI1		14
-#define MXC_INT_ATA		15
+#define MX31_INT_SSI2		11
+#define MX31_INT_SSI1		12
 #define MXC_INT_MBX		16
 #define MXC_INT_CSPI3		17
-#define MXC_INT_UART3		18
-#define MXC_INT_IIM		19
 #define MXC_INT_SIM2		20
 #define MXC_INT_SIM1		21
-#define MXC_INT_RNGA		22
-#define MXC_INT_EVTMON		23
-#define MXC_INT_KPP		24
-#define MXC_INT_RTC		25
-#define MXC_INT_PWM		26
-#define MXC_INT_EPIT2		27
-#define MXC_INT_EPIT1		28
-#define MXC_INT_GPT		29
-#define MXC_INT_RESV30		30
-#define MXC_INT_RESV31		31
-#define MXC_INT_UART2		32
-#define MXC_INT_NANDFC		33
-#define MXC_INT_SDMA		34
+#define MXC_INT_CCM_DVFS	31
 #define MXC_INT_USB1		35
 #define MXC_INT_USB2		36
 #define MXC_INT_USB3		37
 #define MXC_INT_USB4		38
-#define MXC_INT_MSHC1		39
 #define MXC_INT_MSHC2		40
-#define MXC_INT_IPU_ERR		41
-#define MXC_INT_IPU_SYN		42
-#define MXC_INT_RESV43		43
-#define MXC_INT_RESV44		44
-#define MXC_INT_UART1		45
 #define MXC_INT_UART4		46
 #define MXC_INT_UART5		47
-#define MXC_INT_ECT		48
-#define MXC_INT_SCC_SCM		49
-#define MXC_INT_SCC_SMN		50
-#define MXC_INT_GPIO2		51
-#define MXC_INT_GPIO1		52
 #define MXC_INT_CCM		53
 #define MXC_INT_PCMCIA		54
-#define MXC_INT_WDOG		55
-#define MXC_INT_GPIO3		56
-#define MXC_INT_RESV57		57
-#define MXC_INT_EXT_POWER	58
-#define MXC_INT_EXT_TEMPER	59
-#define MXC_INT_EXT_SENSOR60	60
-#define MXC_INT_EXT_SENSOR61	61
-#define MXC_INT_EXT_WDOG	62
-#define MXC_INT_EXT_TV		63
-
-#define PROD_SIGNATURE		0x1	/* For MX31 */
-
-/* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_1_1		0x11
-#define CHIP_REV_1_2		0x12
-#define CHIP_REV_1_3		0x13
-#define CHIP_REV_2_0		0x20
-#define CHIP_REV_2_1		0x21
-#define CHIP_REV_2_2		0x22
-#define CHIP_REV_2_3		0x23
-#define CHIP_REV_3_0		0x30
-#define CHIP_REV_3_1		0x31
-#define CHIP_REV_3_2		0x32
-
-#define SYSTEM_REV_MIN		CHIP_REV_1_0
-#define SYSTEM_REV_NUM		3
-
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x00
-#define GPIO_GDIR	 	0x04
-#define GPIO_PSR	 	0x08
-#define GPIO_ICR1	 	0x0C
-#define GPIO_ICR2	 	0x10
-#define GPIO_IMR	 	0x14
-#define GPIO_ISR	 	0x18
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_FALL_EDGE	0x3
-#define GPIO_INT_NONE		0x4
-
-/* Mandatory defines used globally */
-
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS		96
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-/* this is a i.MX31 CPU */
-#define cpu_is_mx31()		(1)
-
-extern unsigned int system_rev;
-
-static inline int mx31_revision(void)
-{
-	return system_rev;
-}
-#endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
new file mode 100644
index 00000000000..6465fefb42e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -0,0 +1,29 @@
+/*
+ * IRAM
+ */
+#define MX35_IRAM_BASE_ADDR		0x10000000	/* internal ram */
+#define MX35_IRAM_SIZE		SZ_128K
+
+#define MXC_FEC_BASE_ADDR	0x50038000
+#define MX35_NFC_BASE_ADDR	0xBB000000
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_OWIRE		2
+#define MX35_INT_MMC_SDHC1	7
+#define MXC_INT_MMC_SDHC2	8
+#define MXC_INT_MMC_SDHC3	9
+#define MX35_INT_SSI1		11
+#define MX35_INT_SSI2		12
+#define MXC_INT_GPU2D		16
+#define MXC_INT_ASRC		17
+#define MXC_INT_USBHS		35
+#define MXC_INT_USBOTG		37
+#define MXC_INT_ESAI		40
+#define MXC_INT_CAN1		43
+#define MXC_INT_CAN2		44
+#define MXC_INT_MLB		46
+#define MXC_INT_SPDIF		47
+#define MXC_INT_FEC		57
+
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
index e391a76ca87..ac24c5c4bc8 100644
--- a/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ b/arch/arm/plat-mxc/include/mach/mx3fb.h
@@ -14,25 +14,25 @@
 #include <linux/fb.h>
 
 /* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH    0x80000000
-#define FB_SYNC_CLK_INVERT     0x40000000
-#define FB_SYNC_DATA_INVERT    0x20000000
-#define FB_SYNC_CLK_IDLE_EN    0x10000000
-#define FB_SYNC_SHARP_MODE     0x08000000
-#define FB_SYNC_SWAP_RGB       0x04000000
-#define FB_SYNC_CLK_SEL_EN     0x02000000
+#define FB_SYNC_OE_ACT_HIGH	0x80000000
+#define FB_SYNC_CLK_INVERT	0x40000000
+#define FB_SYNC_DATA_INVERT	0x20000000
+#define FB_SYNC_CLK_IDLE_EN	0x10000000
+#define FB_SYNC_SHARP_MODE	0x08000000
+#define FB_SYNC_SWAP_RGB	0x04000000
+#define FB_SYNC_CLK_SEL_EN	0x02000000
 
 /**
  * struct mx3fb_platform_data - mx3fb platform data
  *
- * @dma_dev:   pointer to the dma-device, used for dma-slave connection
- * @mode:      pointer to a platform-provided per mxc_register_fb() videomode
+ * @dma_dev:	pointer to the dma-device, used for dma-slave connection
+ * @mode:	pointer to a platform-provided per mxc_register_fb() videomode
  */
 struct mx3fb_platform_data {
-       struct device                   *dma_dev;
-       const char                      *name;
-       const struct fb_videomode       *mode;
-       int                             num_modes;
+	struct device			*dma_dev;
+	const char			*name;
+	const struct fb_videomode	*mode;
+	int				num_modes;
 };
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
new file mode 100644
index 00000000000..3878c6085d5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*
+ * MX31 memory map:
+ *
+ * Virt		Phys		Size	What
+ * ---------------------------------------------------------------------------
+ * FC000000	43F00000	1M	AIPS 1
+ * FC100000	50000000	1M	SPBA
+ * FC200000	53F00000	1M	AIPS 2
+ * FC500000	60000000	128M	ROMPATCH
+ * FC400000	68000000	128M	AVIC
+ *         	70000000	256M	IPU (MAX M2)
+ *         	80000000	256M	CSD0 SDRAM/DDR
+ *         	90000000	256M	CSD1 SDRAM/DDR
+ *         	A0000000	128M	CS0 Flash
+ *         	A8000000	128M	CS1 Flash
+ *         	B0000000	32M	CS2
+ *         	B2000000	32M	CS3
+ * F4000000	B4000000	32M	CS4
+ *         	B6000000	32M	CS5
+ * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
+ *         	C0000000	64M	PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR		0xA0000000
+#define CS1_BASE_ADDR		0xA8000000
+#define CS2_BASE_ADDR		0xB0000000
+#define CS3_BASE_ADDR		0xB2000000
+
+#define CS4_BASE_ADDR		0xB4000000
+#define CS4_BASE_ADDR_VIRT	0xF4000000
+#define CS4_SIZE		SZ_32M
+
+#define CS5_BASE_ADDR		0xB6000000
+#define PCMCIA_MEM_BASE_ADDR	0xBC000000
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR		0x30000000
+#define L2CC_SIZE		SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR		0x43F00000
+#define AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define AIPS1_SIZE		SZ_1M
+
+#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
+#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
+#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 	0x50000000
+#define SPBA0_BASE_ADDR_VIRT	0xFC100000
+#define SPBA0_SIZE		SZ_1M
+
+#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
+#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR		0x53F00000
+#define AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define AIPS2_SIZE		SZ_1M
+#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
+#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
+#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
+#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR		0x60000000
+#define ROMP_BASE_ADDR_VIRT	0xFC500000
+#define ROMP_SIZE		SZ_1M
+
+#define AVIC_BASE_ADDR		0x68000000
+#define AVIC_BASE_ADDR_VIRT	0xFC400000
+#define AVIC_SIZE		SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR	0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
+#define X_MEMC_SIZE		SZ_64K
+
+#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR	0x70000000
+#define CSD0_BASE_ADDR		0x80000000
+#define CSD1_BASE_ADDR		0x90000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(void __force __iomem *) \
+	(((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+	0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define L2CC_IO_ADDRESS(x)  \
+	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x)  \
+	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x)  \
+	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x)  \
+	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x)  \
+	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)  \
+	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_I2C3		3
+#define MXC_INT_I2C2		4
+#define MXC_INT_RTIC		6
+#define MXC_INT_I2C		10
+#define MXC_INT_CSPI2		13
+#define MXC_INT_CSPI1		14
+#define MXC_INT_ATA		15
+#define MXC_INT_UART3		18
+#define MXC_INT_IIM		19
+#define MXC_INT_RNGA		22
+#define MXC_INT_EVTMON		23
+#define MXC_INT_KPP		24
+#define MXC_INT_RTC		25
+#define MXC_INT_PWM		26
+#define MXC_INT_EPIT2		27
+#define MXC_INT_EPIT1		28
+#define MXC_INT_GPT		29
+#define MXC_INT_POWER_FAIL	30
+#define MXC_INT_UART2		32
+#define MXC_INT_NANDFC		33
+#define MXC_INT_SDMA		34
+#define MXC_INT_MSHC1		39
+#define MXC_INT_IPU_ERR		41
+#define MXC_INT_IPU_SYN		42
+#define MXC_INT_UART1		45
+#define MXC_INT_ECT		48
+#define MXC_INT_SCC_SCM		49
+#define MXC_INT_SCC_SMN		50
+#define MXC_INT_GPIO2		51
+#define MXC_INT_GPIO1		52
+#define MXC_INT_WDOG		55
+#define MXC_INT_GPIO3		56
+#define MXC_INT_EXT_POWER	58
+#define MXC_INT_EXT_TEMPER	59
+#define MXC_INT_EXT_SENSOR60	60
+#define MXC_INT_EXT_SENSOR61	61
+#define MXC_INT_EXT_WDOG	62
+#define MXC_INT_EXT_TV		63
+
+#define PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0		0x10
+#define CHIP_REV_1_1		0x11
+#define CHIP_REV_1_2		0x12
+#define CHIP_REV_1_3		0x13
+#define CHIP_REV_2_0		0x20
+#define CHIP_REV_2_1		0x21
+#define CHIP_REV_2_2		0x22
+#define CHIP_REV_2_3		0x23
+#define CHIP_REV_3_0		0x30
+#define CHIP_REV_3_1		0x31
+#define CHIP_REV_3_2		0x32
+
+#define SYSTEM_REV_MIN		CHIP_REV_1_0
+#define SYSTEM_REV_NUM		3
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x00
+#define GPIO_GDIR	 	0x04
+#define GPIO_PSR	 	0x08
+#define GPIO_ICR1	 	0x0C
+#define GPIO_ICR2	 	0x10
+#define GPIO_IMR	 	0x14
+#define GPIO_ISR	 	0x18
+#define GPIO_INT_LOW_LEV	0x0
+#define GPIO_INT_HIGH_LEV	0x1
+#define GPIO_INT_RISE_EDGE	0x2
+#define GPIO_INT_FALL_EDGE	0x3
+#define GPIO_INT_NONE		0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS		96
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+	return system_rev;
+}
+#endif
+
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index f6caab06213..5fa2a07f4ea 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -24,13 +24,74 @@
 #error "Do not include directly."
 #endif
 
-/* clean up all things that are not used */
-#ifndef CONFIG_ARCH_MX3
-# define cpu_is_mx31() (0)
+#define MXC_CPU_MX1		1
+#define MXC_CPU_MX21		21
+#define MXC_CPU_MX27		27
+#define MXC_CPU_MX31		31
+#define MXC_CPU_MX35		35
+
+#ifndef __ASSEMBLY__
+extern unsigned int __mxc_cpu_type;
+#endif
+
+#ifdef CONFIG_ARCH_MX1
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX1
+# endif
+# define cpu_is_mx1()		(mxc_cpu_type == MXC_CPU_MX1)
+#else
+# define cpu_is_mx1()		(0)
+#endif
+
+#ifdef CONFIG_MACH_MX21
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX21
+# endif
+# define cpu_is_mx21()		(mxc_cpu_type == MXC_CPU_MX21)
+#else
+# define cpu_is_mx21()		(0)
 #endif
 
-#ifndef CONFIG_MACH_MX27
-# define cpu_is_mx27() (0)
+#ifdef CONFIG_MACH_MX27
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX27
+# endif
+# define cpu_is_mx27()		(mxc_cpu_type == MXC_CPU_MX27)
+#else
+# define cpu_is_mx27()		(0)
+#endif
+
+#ifdef CONFIG_ARCH_MX31
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX31
+# endif
+# define cpu_is_mx31()		(mxc_cpu_type == MXC_CPU_MX31)
+#else
+# define cpu_is_mx31()		(0)
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX35
+# endif
+# define cpu_is_mx35()		(mxc_cpu_type == MXC_CPU_MX35)
+#else
+# define cpu_is_mx35()		(0)
 #endif
 
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
@@ -39,4 +100,7 @@
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
 #endif
 
+#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
+
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index bbfc37465fc..cd03ebaa49b 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -26,7 +26,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index df6f1839568..a37163ce280 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -32,7 +32,7 @@
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
 
 void mxc_gpio_mode(int gpio_mode)
 {
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
new file mode 100644
index 00000000000..9bffbc507cc
--- /dev/null
+++ b/arch/arm/plat-mxc/pwm.c
@@ -0,0 +1,300 @@
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
+#define PWM_VER_1
+
+#define PWMCR	0x00	/* PWM Control Register		*/
+#define PWMSR	0x04	/* PWM Sample Register		*/
+#define PWMPR	0x08	/* PWM Period Register		*/
+#define PWMCNR	0x0C	/* PWM Counter Register		*/
+
+#define PWMCR_HCTR		(1 << 18)		/* Halfword FIFO Data Swapping	*/
+#define PWMCR_BCTR		(1 << 17)		/* Byte FIFO Data Swapping	*/
+#define PWMCR_SWR		(1 << 16)		/* Software Reset		*/
+#define PWMCR_CLKSRC_PERCLK	(0 << 15)		/* PERCLK Clock Source		*/
+#define PWMCR_CLKSRC_CLK32	(1 << 15)		/* 32KHz Clock Source		*/
+#define PWMCR_PRESCALER(x)	(((x - 1) & 0x7F) << 8)	/* PRESCALER			*/
+#define PWMCR_IRQ		(1 << 7)		/* Interrupt Request		*/
+#define PWMCR_IRQEN		(1 << 6)		/* Interrupt Request Enable	*/
+#define PWMCR_FIFOAV		(1 << 5)		/* FIFO Available		*/
+#define PWMCR_EN		(1 << 4)		/* Enables/Disables the PWM	*/
+#define PWMCR_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
+#define PWMCR_DIV(x)		(((x) & 0x03) << 0)	/* Clock divider 2/4/8/16	*/
+
+#define MAX_DIV			(128 * 16)
+#endif
+
+#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
+#define PWM_VER_2
+
+#define PWMCR	0x00	/* PWM Control Register		*/
+#define PWMSR	0x04	/* PWM Status Register		*/
+#define PWMIR	0x08	/* PWM Interrupt Register	*/
+#define PWMSAR	0x0C	/* PWM Sample Register		*/
+#define PWMPR	0x10	/* PWM Period Register		*/
+#define PWMCNR	0x14	/* PWM Counter Register		*/
+
+#define PWMCR_EN		(1 << 0)		/* Enables/Disables the PWM	*/
+#define PWMCR_REPEAT(x)		(((x) & 0x03) << 1)	/* Sample Repeats		*/
+#define PWMCR_SWR		(1 << 3)		/* Software Reset		*/
+#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)/* PRESCALER			*/
+#define PWMCR_CLKSRC(x)		(((x) & 0x3) << 16)
+#define PWMCR_CLKSRC_OFF	(0 << 16)
+#define PWMCR_CLKSRC_IPG	(1 << 16)
+#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
+#define PWMCR_CLKSRC_CLK32	(3 << 16)
+#define PWMCR_POUTC
+#define PWMCR_HCTR		(1 << 20)		/* Halfword FIFO Data Swapping	*/
+#define PWMCR_BCTR		(1 << 21)		/* Byte FIFO Data Swapping	*/
+#define PWMCR_DBGEN		(1 << 22)		/* Debug Mode			*/
+#define PWMCR_WAITEN		(1 << 23)		/* Wait Mode			*/
+#define PWMCR_DOZEN		(1 << 24)		/* Doze Mode			*/
+#define PWMCR_STOPEN		(1 << 25)		/* Stop Mode			*/
+#define PWMCR_FWM(x)		(((x) & 0x3) << 26)	/* FIFO Water Mark		*/
+
+#define MAX_DIV 4096
+#endif
+
+#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
+#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
+#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
+
+struct pwm_device {
+	struct list_head	node;
+	struct platform_device *pdev;
+
+	const char	*label;
+	struct clk	*clk;
+
+	int		clk_enabled;
+	void __iomem	*mmio_base;
+
+	unsigned int	use_count;
+	unsigned int	pwm_id;
+};
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long long c;
+	unsigned long period_cycles, duty_cycles, prescale;
+
+	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	c = clk_get_rate(pwm->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	prescale = period_cycles / 0x10000 + 1;
+
+	period_cycles /= prescale;
+	c = (unsigned long long)period_cycles * duty_ns;
+	do_div(c, period_ns);
+	duty_cycles = c;
+
+#ifdef PWM_VER_2
+	writel(duty_cycles, pwm->mmio_base + PWMSAR);
+	writel(period_cycles, pwm->mmio_base + PWMPR);
+	writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
+			pwm->mmio_base + PWMCR);
+#elif defined PWM_VER_1
+#error PWM not yet working on MX1 / MX21
+#endif
+
+	return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	int rc = 0;
+
+	if (!pwm->clk_enabled) {
+		rc = clk_enable(pwm->clk);
+		if (!rc)
+			pwm->clk_enabled = 1;
+	}
+	return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	if (pwm->clk_enabled) {
+		clk_disable(pwm->clk);
+		pwm->clk_enabled = 0;
+	}
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, node) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count++;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		pr_warning("PWM device already freed\n");
+
+	mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static int __devinit mxc_pwm_probe(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+	int ret = 0;
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	pwm->clk = clk_get(&pdev->dev, "pwm");
+
+	if (IS_ERR(pwm->clk)) {
+		ret = PTR_ERR(pwm->clk);
+		goto err_free;
+	}
+
+	pwm->clk_enabled = 0;
+
+	pwm->use_count = 0;
+	pwm->pwm_id = pdev->id;
+	pwm->pdev = pdev;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	if (pwm->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->node, &pwm_list);
+	mutex_unlock(&pwm_lock);
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+err_free_mem:
+	release_mem_region(r->start, r->end - r->start + 1);
+err_free_clk:
+	clk_put(pwm->clk);
+err_free:
+	kfree(pwm);
+	return ret;
+}
+
+static int __devexit mxc_pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+
+	pwm = platform_get_drvdata(pdev);
+	if (pwm == NULL)
+		return -ENODEV;
+
+	mutex_lock(&pwm_lock);
+	list_del(&pwm->node);
+	mutex_unlock(&pwm_lock);
+
+	iounmap(pwm->mmio_base);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, r->end - r->start + 1);
+
+	clk_put(pwm->clk);
+
+	kfree(pwm);
+	return 0;
+}
+
+static struct platform_driver mxc_pwm_driver = {
+	.driver		= {
+		.name	= "mxc_pwm",
+	},
+	.probe		= mxc_pwm_probe,
+	.remove		= __devexit_p(mxc_pwm_remove),
+};
+
+static int __init mxc_pwm_init(void)
+{
+	return platform_driver_register(&mxc_pwm_driver);
+}
+arch_initcall(mxc_pwm_init);
+
+static void __exit mxc_pwm_exit(void)
+{
+	platform_driver_unregister(&mxc_pwm_driver);
+}
+module_exit(mxc_pwm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 758a1293bcf..ef1b3cd85bd 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -34,9 +34,6 @@
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
-/* clock source for the timer */
-static struct clk *timer_clk;
-
 /* clock source */
 
 static cycle_t mxc_get_cycles(void)
@@ -53,13 +50,11 @@ static struct clocksource clocksource_mxc = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static int __init mxc_clocksource_init(void)
+static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
-	unsigned int clock;
-
-	clock = clk_get_rate(timer_clk);
+	unsigned int c = clk_get_rate(timer_clk);
 
-	clocksource_mxc.mult = clocksource_hz2mult(clock,
+	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
 	clocksource_register(&clocksource_mxc);
 
@@ -177,13 +172,11 @@ static struct clock_event_device clockevent_mxc = {
 	.rating		= 200,
 };
 
-static int __init mxc_clockevent_init(void)
+static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
-	unsigned int clock;
-
-	clock = clk_get_rate(timer_clk);
+	unsigned int c = clk_get_rate(timer_clk);
 
-	clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
 	clockevent_mxc.max_delta_ns =
 			clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
@@ -197,14 +190,8 @@ static int __init mxc_clockevent_init(void)
 	return 0;
 }
 
-void __init mxc_timer_init(const char *clk_timer)
+void __init mxc_timer_init(struct clk *timer_clk)
 {
-	timer_clk = clk_get(NULL, clk_timer);
-	if (!timer_clk) {
-		printk(KERN_ERR"Cannot determine timer clock. Giving up.\n");
-		return;
-	}
-
 	clk_enable(timer_clk);
 
 	/*
@@ -219,10 +206,9 @@ void __init mxc_timer_init(const char *clk_timer)
 		     TIMER_BASE + MXC_TCTL);
 
 	/* init and register the timer to the framework */
-	mxc_clocksource_init();
-	mxc_clockevent_init();
+	mxc_clocksource_init(timer_clk);
+	mxc_clockevent_init(timer_clk);
 
 	/* Make irqs happen */
 	setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
 }
-
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 46d3b0b9ce6..9dd68fafb37 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -11,14 +11,17 @@ choice
 
 config ARCH_OMAP1
 	bool "TI OMAP1"
+	select COMMON_CLKDEV
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
 	select CPU_V6
+	select COMMON_CLKDEV
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
 	select CPU_V7
+	select COMMON_CLKDEV
 
 endchoice
 
@@ -104,6 +107,14 @@ config OMAP_MCBSP
 	  Say Y here if you want support for the OMAP Multichannel
 	  Buffered Serial Port.
 
+config OMAP_MBOX_FWK
+	tristate "Mailbox framework support"
+	depends on ARCH_OMAP
+	default n
+	help
+	  Say Y here if you want to use OMAP Mailbox framework support for
+	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index deaff58878a..04a100cfb8e 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
 
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index be6aab9c683..2e0614552ac 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,44 +36,6 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk * clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
@@ -114,22 +76,6 @@ out:
 }
 EXPORT_SYMBOL(clk_disable);
 
-int clk_get_usecount(struct clk *clk)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	if (clk == NULL || IS_ERR(clk))
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = clk->usecount;
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_usecount);
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	unsigned long flags;
@@ -146,13 +92,6 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-void clk_put(struct clk *clk)
-{
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
 /*-------------------------------------------------------------------------
  * Optional clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
@@ -185,6 +124,11 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_set_rate)
 		ret = arch_clock->clk_set_rate(clk, rate);
+	if (ret == 0) {
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
+		propagate_rate(clk);
+	}
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
@@ -200,8 +144,16 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return ret;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	if (arch_clock->clk_set_parent)
-		ret =  arch_clock->clk_set_parent(clk, parent);
+	if (clk->usecount == 0) {
+		if (arch_clock->clk_set_parent)
+			ret = arch_clock->clk_set_parent(clk, parent);
+		if (ret == 0) {
+			if (clk->recalc)
+				clk->rate = clk->recalc(clk);
+			propagate_rate(clk);
+		}
+	} else
+		ret = -EBUSY;
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
@@ -210,18 +162,7 @@ EXPORT_SYMBOL(clk_set_parent);
 
 struct clk *clk_get_parent(struct clk *clk)
 {
-	unsigned long flags;
-	struct clk * ret = NULL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (arch_clock->clk_get_parent)
-		ret = arch_clock->clk_get_parent(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
+	return clk->parent;
 }
 EXPORT_SYMBOL(clk_get_parent);
 
@@ -250,14 +191,20 @@ static int __init omap_clk_setup(char *str)
 __setup("mpurate=", omap_clk_setup);
 
 /* Used for clocks that always have same value as the parent clock */
-void followparent_recalc(struct clk *clk)
+unsigned long followparent_recalc(struct clk *clk)
 {
-	if (clk == NULL || IS_ERR(clk))
-		return;
+	return clk->parent->rate;
+}
 
-	clk->rate = clk->parent->rate;
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+	list_del_init(&child->sibling);
+	if (parent)
+		list_add(&child->sibling, &parent->children);
+	child->parent = parent;
+
+	/* now do the debugfs renaming to reattach the child
+	   to the proper parent */
 }
 
 /* Propagate rate to children */
@@ -265,17 +212,15 @@ void propagate_rate(struct clk * tclk)
 {
 	struct clk *clkp;
 
-	if (tclk == NULL || IS_ERR(tclk))
-		return;
-
-	list_for_each_entry(clkp, &clocks, node) {
-		if (likely(clkp->parent != tclk))
-			continue;
-		if (likely((u32)clkp->recalc))
-			clkp->recalc(clkp);
+	list_for_each_entry(clkp, &tclk->children, sibling) {
+		if (clkp->recalc)
+			clkp->rate = clkp->recalc(clkp);
+		propagate_rate(clkp);
 	}
 }
 
+static LIST_HEAD(root_clks);
+
 /**
  * recalculate_root_clocks - recalculate and propagate all root clocks
  *
@@ -287,18 +232,35 @@ void recalculate_root_clocks(void)
 {
 	struct clk *clkp;
 
-	list_for_each_entry(clkp, &clocks, node) {
-		if (unlikely(!clkp->parent) && likely((u32)clkp->recalc))
-			clkp->recalc(clkp);
+	list_for_each_entry(clkp, &root_clks, sibling) {
+		if (clkp->recalc)
+			clkp->rate = clkp->recalc(clkp);
+		propagate_rate(clkp);
 	}
 }
 
+void clk_init_one(struct clk *clk)
+{
+	INIT_LIST_HEAD(&clk->children);
+}
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
+	/*
+	 * trap out already registered clocks
+	 */
+	if (clk->node.next || clk->node.prev)
+		return 0;
+
 	mutex_lock(&clocks_mutex);
+	if (clk->parent)
+		list_add(&clk->sibling, &clk->parent->children);
+	else
+		list_add(&clk->sibling, &root_clks);
+
 	list_add(&clk->node, &clocks);
 	if (clk->init)
 		clk->init(clk);
@@ -314,39 +276,12 @@ void clk_unregister(struct clk *clk)
 		return;
 
 	mutex_lock(&clocks_mutex);
+	list_del(&clk->sibling);
 	list_del(&clk->node);
 	mutex_unlock(&clocks_mutex);
 }
 EXPORT_SYMBOL(clk_unregister);
 
-void clk_deny_idle(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (arch_clock->clk_deny_idle)
-		arch_clock->clk_deny_idle(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_deny_idle);
-
-void clk_allow_idle(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (arch_clock->clk_allow_idle)
-		arch_clock->clk_allow_idle(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_allow_idle);
-
 void clk_enable_init_clocks(void)
 {
 	struct clk *clkp;
@@ -358,6 +293,23 @@ void clk_enable_init_clocks(void)
 }
 EXPORT_SYMBOL(clk_enable_init_clocks);
 
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+	return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+	.enable		= clkll_enable_null,
+	.disable	= clkll_disable_null,
+};
+
 #ifdef CONFIG_CPU_FREQ
 void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 {
@@ -383,8 +335,10 @@ static int __init clk_disable_unused(void)
 	unsigned long flags;
 
 	list_for_each_entry(ck, &clocks, node) {
-		if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
-			ck->enable_reg == 0)
+		if (ck->ops == &clkops_null)
+			continue;
+
+		if (ck->usecount > 0 || ck->enable_reg == 0)
 			continue;
 
 		spin_lock_irqsave(&clockfw_lock, flags);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 0843b8882f9..d1797147732 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -200,20 +200,16 @@ static struct clocksource clocksource_32k = {
 };
 
 /*
- * Rounds down to nearest nsec.
- */
-unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
-	return cyc2ns(&clocksource_32k, ticks_32k);
-}
-
-/*
  * Returns current time from boot in nsecs. It's OK for this to wrap
  * around for now, as it's just a relative time stamp.
  */
 unsigned long long sched_clock(void)
 {
-	return omap_32k_ticks_to_nsecs(omap_32k_read());
+	unsigned long long ret;
+
+	ret = (unsigned long long)omap_32k_read();
+	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+	return ret;
 }
 
 static int __init omap_init_clocksource_32k(void)
@@ -249,7 +245,7 @@ static struct omap_globals *omap2_globals;
 static void __init __omap2_set_globals(void)
 {
 	omap2_set_globals_tap(omap2_globals);
-	omap2_set_globals_memory(omap2_globals);
+	omap2_set_globals_sdrc(omap2_globals);
 	omap2_set_globals_control(omap2_globals);
 	omap2_set_globals_prcm(omap2_globals);
 }
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index b2690242a39..843e8af6406 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -23,10 +23,13 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/clock.h>
 #include <asm/system.h>
 
 #define VERY_HI_RATE	900000000
 
+static struct cpufreq_frequency_table *freq_table;
+
 #ifdef CONFIG_ARCH_OMAP1
 #define MPU_CLK		"mpu"
 #else
@@ -39,6 +42,9 @@ static struct clk *mpu_clk;
 
 int omap_verify_speed(struct cpufreq_policy *policy)
 {
+	if (freq_table)
+		return cpufreq_frequency_table_verify(policy, freq_table);
+
 	if (policy->cpu)
 		return -EINVAL;
 
@@ -70,12 +76,26 @@ static int omap_target(struct cpufreq_policy *policy,
 	struct cpufreq_freqs freqs;
 	int ret = 0;
 
+	/* Ensure desired rate is within allowed range.  Some govenors
+	 * (ondemand) will just pass target_freq=0 to get the minimum. */
+	if (target_freq < policy->cpuinfo.min_freq)
+		target_freq = policy->cpuinfo.min_freq;
+	if (target_freq > policy->cpuinfo.max_freq)
+		target_freq = policy->cpuinfo.max_freq;
+
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
 	freqs.cpu = 0;
 
+	if (freqs.old == freqs.new)
+		return ret;
+
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	ret = clk_set_rate(mpu_clk, target_freq * 1000);
+#ifdef CONFIG_CPU_FREQ_DEBUG
+	printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n",
+	       freqs.old, freqs.new);
+#endif
+	ret = clk_set_rate(mpu_clk, freqs.new * 1000);
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	return ret;
@@ -83,16 +103,31 @@ static int omap_target(struct cpufreq_policy *policy,
 
 static int __init omap_cpu_init(struct cpufreq_policy *policy)
 {
+	int result = 0;
+
 	mpu_clk = clk_get(NULL, MPU_CLK);
 	if (IS_ERR(mpu_clk))
 		return PTR_ERR(mpu_clk);
 
 	if (policy->cpu != 0)
 		return -EINVAL;
+
 	policy->cur = policy->min = policy->max = omap_getspeed(0);
-	policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
-	policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+	clk_init_cpufreq_table(&freq_table);
+	if (freq_table) {
+		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+		if (!result)
+			cpufreq_frequency_table_get_attr(freq_table,
+							policy->cpu);
+	} else {
+		policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
+		policy->cpuinfo.max_freq = clk_round_rate(mpu_clk,
+							VERY_HI_RATE) / 1000;
+	}
+
+	/* FIXME: what's the actual transition time? */
+	policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
 
 	return 0;
 }
@@ -103,6 +138,11 @@ static int omap_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
+static struct freq_attr *omap_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
 static struct cpufreq_driver omap_driver = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= omap_verify_speed,
@@ -111,6 +151,7 @@ static struct cpufreq_driver omap_driver = {
 	.init		= omap_cpu_init,
 	.exit		= omap_cpu_exit,
 	.name		= "omap",
+	.attr		= omap_cpufreq_attr,
 };
 
 static int __init omap_cpufreq_init(void)
@@ -119,3 +160,11 @@ static int __init omap_cpufreq_init(void)
 }
 
 arch_initcall(omap_cpufreq_init);
+
+/*
+ * if ever we want to remove this, upon cleanup call:
+ *
+ * cpufreq_unregister_driver()
+ * cpufreq_frequency_table_put_attr()
+ */
+
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 208dbb121f4..87fb7ff4179 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -228,6 +228,9 @@ int __init omap_mmc_add(const char *name, int id, unsigned long base,
 	ret = platform_device_add(pdev);
 	if (ret)
 		goto fail;
+
+	/* return device handle to board setup code */
+	data->dev = &pdev->dev;
 	return 0;
 
 fail:
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 47ec77af4cc..21cc0142b97 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -123,6 +123,7 @@ static struct dma_link_info *dma_linked_lch;
 
 static int dma_lch_count;
 static int dma_chan_count;
+static int omap_dma_reserve_channels;
 
 static spinlock_t dma_chan_lock;
 static struct omap_dma_lch *dma_chan;
@@ -737,7 +738,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 		 * id.
 		 */
 		dma_write(dev_id | (1 << 10), CCR(free_ch));
-	} else if (cpu_is_omap730() || cpu_is_omap15xx()) {
+	} else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
 		dma_write(dev_id, CCR(free_ch));
 	}
 
@@ -1900,7 +1901,7 @@ static int omap2_dma_handle_ch(int ch)
 /* STATUS register count is from 1-32 while our is 0-31 */
 static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 {
-	u32 val;
+	u32 val, enable_reg;
 	int i;
 
 	val = dma_read(IRQSTATUS_L0);
@@ -1909,6 +1910,8 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 			printk(KERN_WARNING "Spurious DMA IRQ\n");
 		return IRQ_HANDLED;
 	}
+	enable_reg = dma_read(IRQENABLE_L0);
+	val &= enable_reg; /* Dispatch only relevant interrupts */
 	for (i = 0; i < dma_lch_count && val != 0; i++) {
 		if (val & 1)
 			omap2_dma_handle_ch(i);
@@ -2321,6 +2324,10 @@ static int __init omap_init_dma(void)
 		return -ENODEV;
 	}
 
+	if (cpu_class_is_omap2() && omap_dma_reserve_channels
+			&& (omap_dma_reserve_channels <= dma_lch_count))
+		dma_lch_count = omap_dma_reserve_channels;
+
 	dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
 				GFP_KERNEL);
 	if (!dma_chan)
@@ -2339,7 +2346,7 @@ static int __init omap_init_dma(void)
 		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
 		dma_chan_count = 9;
 		enable_1510_mode = 1;
-	} else if (cpu_is_omap16xx() || cpu_is_omap730()) {
+	} else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
 		printk(KERN_INFO "OMAP DMA hardware version %d\n",
 		       dma_read(HW_ID));
 		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
@@ -2371,7 +2378,7 @@ static int __init omap_init_dma(void)
 		u8 revision = dma_read(REVISION) & 0xff;
 		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
 		       revision >> 4, revision & 0xf);
-		dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+		dma_chan_count = dma_lch_count;
 	} else {
 		dma_chan_count = 0;
 		return 0;
@@ -2437,4 +2444,17 @@ static int __init omap_init_dma(void)
 
 arch_initcall(omap_init_dma);
 
+/*
+ * Reserve the omap SDMA channels using cmdline bootarg
+ * "omap_dma_reserve_ch=". The valid range is 1 to 32
+ */
+static int __init omap_dma_cmdline_reserve_ch(char *str)
+{
+	if (get_option(&str, &omap_dma_reserve_channels) != 1)
+		omap_dma_reserve_channels = 0;
+	return 1;
+}
+
+__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
+
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index e4f0ce04ba9..bfd47570cc9 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -33,6 +33,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <mach/hardware.h>
 #include <mach/dmtimer.h>
 #include <mach/irqs.h>
@@ -362,6 +363,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 
 	return timer;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_request);
 
 struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 {
@@ -385,6 +387,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 
 	return timer;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
 
 void omap_dm_timer_free(struct omap_dm_timer *timer)
 {
@@ -395,6 +398,7 @@ void omap_dm_timer_free(struct omap_dm_timer *timer)
 	WARN_ON(!timer->reserved);
 	timer->reserved = 0;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_free);
 
 void omap_dm_timer_enable(struct omap_dm_timer *timer)
 {
@@ -406,6 +410,7 @@ void omap_dm_timer_enable(struct omap_dm_timer *timer)
 
 	timer->enabled = 1;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
@@ -417,11 +422,13 @@ void omap_dm_timer_disable(struct omap_dm_timer *timer)
 
 	timer->enabled = 0;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
 int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
 {
 	return timer->irq;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
 
 #if defined(CONFIG_ARCH_OMAP1)
 
@@ -452,6 +459,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 
 	return inputmask;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
 #elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
 
@@ -459,6 +467,7 @@ struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
 	return timer->fclk;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
 
 __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 {
@@ -466,6 +475,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
 #endif
 
@@ -473,6 +483,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer)
 {
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
 
 void omap_dm_timer_start(struct omap_dm_timer *timer)
 {
@@ -484,6 +495,7 @@ void omap_dm_timer_start(struct omap_dm_timer *timer)
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	}
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_start);
 
 void omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
@@ -495,6 +507,7 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	}
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 
 #ifdef CONFIG_ARCH_OMAP1
 
@@ -507,6 +520,7 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	l |= source << n;
 	omap_writel(l, MOD_CONF_CTRL_1);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
 #else
 
@@ -523,6 +537,7 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	 * cause an abort. */
 	__delay(150000);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
 #endif
 
@@ -541,6 +556,7 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
 
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
 
 /* Optimized set_load which removes costly spin wait in timer_start */
 void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
@@ -560,6 +576,7 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
 
 void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
 			     unsigned int match)
@@ -574,6 +591,7 @@ void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
 
 void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
 			   int toggle, int trigger)
@@ -590,6 +608,7 @@ void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
 	l |= trigger << 10;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
 
 void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
 {
@@ -603,6 +622,7 @@ void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
 	}
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
 
 void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
 				  unsigned int value)
@@ -610,6 +630,7 @@ void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
 
 unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 {
@@ -619,11 +640,13 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 
 	return l;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
 
 void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 {
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
 
 unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 {
@@ -633,11 +656,13 @@ unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 
 	return l;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
 
 void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
 {
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
 
 int omap_dm_timers_active(void)
 {
@@ -658,6 +683,7 @@ int omap_dm_timers_active(void)
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 
 int __init omap_dm_timer_init(void)
 {
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index f856a90b264..d3fa41e3d8c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -81,6 +81,22 @@
 #define OMAP730_GPIO_INT_STATUS		0x14
 
 /*
+ * OMAP850 specific GPIO registers
+ */
+#define OMAP850_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO_DATA_INPUT		0x00
+#define OMAP850_GPIO_DATA_OUTPUT	0x04
+#define OMAP850_GPIO_DIR_CONTROL	0x08
+#define OMAP850_GPIO_INT_CONTROL	0x0c
+#define OMAP850_GPIO_INT_MASK		0x10
+#define OMAP850_GPIO_INT_STATUS		0x14
+
+/*
  * omap24xx specific GPIO registers
  */
 #define OMAP242X_GPIO1_BASE		IO_ADDRESS(0x48018000)
@@ -159,7 +175,8 @@ struct gpio_bank {
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
 #define METHOD_GPIO_730		3
-#define METHOD_GPIO_24XX	4
+#define METHOD_GPIO_850		4
+#define METHOD_GPIO_24XX	5
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
@@ -190,6 +207,19 @@ static struct gpio_bank gpio_bank_730[7] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct gpio_bank gpio_bank_850[7] = {
+	{ OMAP_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO4_BASE,  INT_850_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO5_BASE,  INT_850_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_850 },
+	{ OMAP850_GPIO6_BASE,  INT_850_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+};
+#endif
+
+
 #ifdef CONFIG_ARCH_OMAP24XX
 
 static struct gpio_bank gpio_bank_242x[4] = {
@@ -236,7 +266,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 			return &gpio_bank[0];
 		return &gpio_bank[1 + (gpio >> 4)];
 	}
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		if (OMAP_GPIO_IS_MPUIO(gpio))
 			return &gpio_bank[0];
 		return &gpio_bank[1 + (gpio >> 5)];
@@ -251,7 +281,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 
 static inline int get_gpio_index(int gpio)
 {
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		return gpio & 0x1f;
 	if (cpu_is_omap24xx())
 		return gpio & 0x1f;
@@ -273,7 +303,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if ((cpu_is_omap16xx()) && gpio < 64)
 		return 0;
-	if (cpu_is_omap730() && gpio < 192)
+	if (cpu_is_omap7xx() && gpio < 192)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
@@ -318,6 +348,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP730_GPIO_DIR_CONTROL;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
@@ -380,6 +415,16 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_OUTPUT;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
@@ -426,6 +471,11 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP730_GPIO_DATA_INPUT;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_INPUT;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
@@ -598,6 +648,18 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_CONTROL;
+		l = __raw_readl(reg);
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
@@ -678,6 +740,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP730_GPIO_INT_STATUS;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_STATUS;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
@@ -736,6 +803,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_MASK;
+		mask = 0xffffffff;
+		inv = 1;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
@@ -799,6 +873,16 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_MASK;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
@@ -983,6 +1067,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_730)
 		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (bank->method == METHOD_GPIO_850)
+		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
@@ -1372,6 +1460,13 @@ static int __init _omap_gpio_init(void)
 		gpio_bank = gpio_bank_730;
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		printk(KERN_INFO "OMAP850 GPIO hardware\n");
+		gpio_bank_count = 7;
+		gpio_bank = gpio_bank_850;
+	}
+#endif
 
 #ifdef CONFIG_ARCH_OMAP24XX
 	if (cpu_is_omap242x()) {
@@ -1420,7 +1515,7 @@ static int __init _omap_gpio_init(void)
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
 			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
-		if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) {
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
 			__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
 			__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
 
@@ -1743,6 +1838,9 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_DIR_CONTROL;
 		break;
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -1762,7 +1860,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 		if (bank_is_mpuio(bank))
 			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap730())
+		else if (cpu_class_is_omap2() || cpu_is_omap730() ||
+				cpu_is_omap850())
 			bankwidth = 32;
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 467531edefd..a303071d5e3 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -98,6 +98,8 @@ static const int omap34xx_pins[][2] = {
 static const int omap34xx_pins[][2] = {};
 #endif
 
+#define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
+
 static void __init omap_i2c_mux_pins(int bus)
 {
 	int scl, sda;
@@ -119,14 +121,9 @@ static void __init omap_i2c_mux_pins(int bus)
 	omap_cfg_reg(scl);
 }
 
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
+static int __init omap_i2c_nr_ports(void)
 {
-	int ports, err;
-	struct platform_device *pdev;
-	struct resource *res;
-	resource_size_t base, irq;
+	int ports = 0;
 
 	if (cpu_class_is_omap1())
 		ports = 1;
@@ -135,17 +132,16 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 	else if (cpu_is_omap34xx())
 		ports = 3;
 
-	BUG_ON(bus_id < 1 || bus_id > ports);
+	return ports;
+}
 
-	if (info) {
-		err = i2c_register_board_info(bus_id, info, len);
-		if (err)
-			return err;
-	}
+static int __init omap_i2c_add_bus(int bus_id)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+	resource_size_t base, irq;
 
 	pdev = &omap_i2c_devices[bus_id - 1];
-	*(u32 *)pdev->dev.platform_data = clkrate;
-
 	if (bus_id == 1) {
 		res = pdev->resource;
 		if (cpu_class_is_omap1()) {
@@ -163,3 +159,81 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 	omap_i2c_mux_pins(bus_id - 1);
 	return platform_device_register(pdev);
 }
+
+/**
+ * omap_i2c_bus_setup - Process command line options for the I2C bus speed
+ * @str: String of options
+ *
+ * This function allow to override the default I2C bus speed for given I2C
+ * bus with a command line option.
+ *
+ * Format: i2c_bus=bus_id,clkrate (in kHz)
+ *
+ * Returns 1 on success, 0 otherwise.
+ */
+static int __init omap_i2c_bus_setup(char *str)
+{
+	int ports;
+	int ints[3];
+
+	ports = omap_i2c_nr_ports();
+	get_options(str, 3, ints);
+	if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+		return 0;
+	i2c_rate[ints[1] - 1] = ints[2];
+	i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
+
+	return 1;
+}
+__setup("i2c_bus=", omap_i2c_bus_setup);
+
+/*
+ * Register busses defined in command line but that are not registered with
+ * omap_register_i2c_bus from board initialization code.
+ */
+static int __init omap_register_i2c_bus_cmdline(void)
+{
+	int i, err = 0;
+
+	for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
+		if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
+			i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
+			err = omap_i2c_add_bus(i + 1);
+			if (err)
+				goto out;
+		}
+
+out:
+	return err;
+}
+subsys_initcall(omap_register_i2c_bus_cmdline);
+
+/**
+ * omap_register_i2c_bus - register I2C bus with device descriptors
+ * @bus_id: bus id counting from number 1
+ * @clkrate: clock rate of the bus in kHz
+ * @info: pointer into I2C device descriptor table or NULL
+ * @len: number of descriptors in the table
+ *
+ * Returns 0 on success or an error code.
+ */
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+			  struct i2c_board_info const *info,
+			  unsigned len)
+{
+	int err;
+
+	BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+
+	if (info) {
+		err = i2c_register_board_info(bus_id, info, len);
+		if (err)
+			return err;
+	}
+
+	if (!i2c_rate[bus_id - 1])
+		i2c_rate[bus_id - 1] = clkrate;
+	i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
+
+	return omap_i2c_add_bus(bus_id);
+}
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
deleted file mode 100644
index 10d449ea7ed..00000000000
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-2430sdp.h
- *
- * Hardware definitions for TI OMAP2430 SDP board.
- *
- * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_2430SDP_H
-#define __ASM_ARCH_OMAP_2430SDP_H
-
-/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START		0x08000300
-#define OMAP24XX_ETHR_GPIO_IRQ		149
-#define SDP2430_CS0_BASE		0x04000000
-
-/* Function prototypes */
-extern void sdp2430_flash_init(void);
-extern void sdp2430_usb_init(void);
-
-#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
deleted file mode 100644
index 61bd5e8f09b..00000000000
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-apollon.h
- *
- * Hardware definitions for Samsung OMAP24XX Apollon board.
- *
- * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_APOLLON_H
-#define __ASM_ARCH_OMAP_APOLLON_H
-
-#include <mach/cpu.h>
-
-extern void apollon_mmc_init(void);
-
-static inline int apollon_plus(void)
-{
-	/* The apollon plus has IDCODE revision 5 */
-	return omap_rev() & 0xc0;
-}
-
-/* Placeholder for APOLLON specific defines */
-#define APOLLON_ETHR_GPIO_IRQ		74
-
-#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
deleted file mode 100644
index cb3c5ae1277..00000000000
--- a/arch/arm/plat-omap/include/mach/board-fsample.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <mach/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
deleted file mode 100644
index 7c3fa0f0a65..00000000000
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-h4.h
- *
- * Hardware definitions for TI OMAP2420 H4 board.
- *
- * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H4_H
-#define __ASM_ARCH_OMAP_H4_H
-
-/* MMC Prototypes */
-extern void h4_mmc_init(void);
-
-/* Placeholder for H4 specific defines */
-#define OMAP24XX_ETHR_GPIO_IRQ		92
-#endif /*  __ASM_ARCH_OMAP_H4_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
deleted file mode 100644
index 5ae3e79b9f9..00000000000
--- a/arch/arm/plat-omap/include/mach/board-innovator.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-innovator.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
-#define __ASM_ARCH_OMAP_INNOVATOR_H
-
-#if defined (CONFIG_ARCH_OMAP15XX)
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
-#endif
-
-#define OMAP1510P1_IMIF_PRI_VALUE		0x00
-#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
-#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
-
-#ifndef __ASSEMBLY__
-void fpga_write(unsigned char val, int reg);
-unsigned char fpga_read(int reg);
-#endif
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined (CONFIG_ARCH_OMAP16XX)
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START	0x04000300
-
-#endif /* CONFIG_ARCH_OMAP1610 */
-#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
deleted file mode 100644
index f2339966521..00000000000
--- a/arch/arm/plat-omap/include/mach/board-ldp.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-ldp.h
- *
- * Hardware definitions for TI OMAP3 LDP.
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_LDP_H
-#define __ASM_ARCH_OMAP_LDP_H
-
-extern void twl4030_bci_battery_init(void);
-
-#define TWL4030_IRQNUM		INT_34XX_SYS_NIRQ
-#define LDP_SMC911X_CS         1
-#define LDP_SMC911X_GPIO       152
-#define DEBUG_BASE             0x08000000
-#define OMAP34XX_ETHR_START    DEBUG_BASE
-#endif /* __ASM_ARCH_OMAP_LDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
deleted file mode 100644
index 2abbe001af8..00000000000
--- a/arch/arm/plat-omap/include/mach/board-nokia.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/board-nokia.h
- *
- *  Information structures for Nokia-specific board config data
- *
- *  Copyright (C) 2005	Nokia Corporation
- */
-
-#ifndef _OMAP_BOARD_NOKIA_H
-#define _OMAP_BOARD_NOKIA_H
-
-#include <linux/types.h>
-
-#define OMAP_TAG_NOKIA_BT	0x4e01
-#define OMAP_TAG_WLAN_CX3110X	0x4e02
-#define OMAP_TAG_CBUS		0x4e03
-#define OMAP_TAG_EM_ASIC_BB5	0x4e04
-
-
-#define BT_CHIP_CSR		1
-#define BT_CHIP_TI		2
-
-#define BT_SYSCLK_12		1
-#define BT_SYSCLK_38_4		2
-
-struct omap_bluetooth_config {
-	u8    chip_type;
-	u8    bt_wakeup_gpio;
-	u8    host_wakeup_gpio;
-	u8    reset_gpio;
-	u8    bt_uart;
-	u8    bd_addr[6];
-	u8    bt_sysclk;
-};
-
-struct omap_wlan_cx3110x_config {
-	u8  chip_type;
-	s16 power_gpio;
-	s16 irq_gpio;
-	s16 spi_cs_gpio;
-};
-
-struct omap_cbus_config {
-	s16 clk_gpio;
-	s16 dat_gpio;
-	s16 sel_gpio;
-};
-
-struct omap_em_asic_bb5_config {
-	s16 retu_irq_gpio;
-	s16 tahvo_irq_gpio;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h
deleted file mode 100644
index 3080d52d877..00000000000
--- a/arch/arm/plat-omap/include/mach/board-omap3beagle.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-omap3beagle.h
- *
- * Hardware definitions for TI OMAP3 BEAGLE.
- *
- * Initial creation by Syed Mohammed Khasim <khasim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP3_BEAGLE_H
-#define __ASM_ARCH_OMAP3_BEAGLE_H
-
-#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
deleted file mode 100644
index 3850cb1f220..00000000000
--- a/arch/arm/plat-omap/include/mach/board-osk.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-osk.h
- *
- * Hardware definitions for TI OMAP5912 OSK board.
- *
- * Written by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_OSK_H
-#define __ASM_ARCH_OMAP_OSK_H
-
-/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
-#define OMAP_OSK_ETHR_START		0x04800300
-
-/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
- * alternate pin configurations for hardware-controlled blinking.
- */
-#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
-#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
-#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
-#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
-#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
-#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
-
-#endif /*  __ASM_ARCH_OMAP_OSK_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h
deleted file mode 100644
index 7ecae66966d..00000000000
--- a/arch/arm/plat-omap/include/mach/board-overo.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * board-overo.h (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OVERO_H
-#define __ASM_ARCH_OVERO_H
-
-#define OVERO_GPIO_BT_XGATE	15
-#define OVERO_GPIO_W2W_NRESET	16
-#define OVERO_GPIO_BT_NRESET	164
-#define OVERO_GPIO_USBH_CPEN	168
-#define OVERO_GPIO_USBH_NRESET	183
-
-#endif /* ____ASM_ARCH_OVERO_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
deleted file mode 100644
index 6906cdebbcf..00000000000
--- a/arch/arm/plat-omap/include/mach/board-palmte.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten E device.
- *
- * Maintainters :	http://palmtelinux.sf.net
- *			palmtelinux-developpers@lists.sf.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTE_H
-#define __OMAP_BOARD_PALMTE_H
-
-#define PALMTE_USBDETECT_GPIO	0
-#define PALMTE_USB_OR_DC_GPIO	1
-#define PALMTE_TSC_GPIO		4
-#define PALMTE_PINTDAV_GPIO	6
-#define PALMTE_MMC_WP_GPIO	8
-#define PALMTE_MMC_POWER_GPIO	9
-#define PALMTE_HDQ_GPIO		11
-#define PALMTE_HEADPHONES_GPIO	14
-#define PALMTE_SPEAKER_GPIO	15
-#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
-
-#endif	/* __OMAP_BOARD_PALMTE_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
deleted file mode 100644
index e79f382b593..00000000000
--- a/arch/arm/plat-omap/include/mach/board-palmtt.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten|T device.
- *
- * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTT_H
-#define __OMAP_BOARD_PALMTT_H
-
-#define PALMTT_USBDETECT_GPIO	0
-#define PALMTT_CABLE_GPIO	1
-#define PALMTT_LED_GPIO		3
-#define PALMTT_PENIRQ_GPIO	6
-#define PALMTT_MMC_WP_GPIO	8
-#define PALMTT_HDQ_GPIO		11
-
-#endif	/* __OMAP_BOARD_PALMTT_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
deleted file mode 100644
index b1d7d579b31..00000000000
--- a/arch/arm/plat-omap/include/mach/board-palmz71.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmz71.h
- *
- * Hardware definitions for the Palm Zire71 device.
- *
- * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMZ71_H
-#define __OMAP_BOARD_PALMZ71_H
-
-#define PALMZ71_USBDETECT_GPIO	0
-#define PALMZ71_PENIRQ_GPIO	6
-#define PALMZ71_MMC_WP_GPIO	8
-#define PALMZ71_HDQ_GPIO 	11
-
-#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
-
-#endif	/* __OMAP_BOARD_PALMZ71_H */
diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
deleted file mode 100644
index c06c3d717d5..00000000000
--- a/arch/arm/plat-omap/include/mach/board-perseus2.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/board-perseus2.h
- *
- *  Copyright 2003 by Texas Instruments Incorporated
- *    OMAP730 / Perseus2 support by Jean Pihet
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
-#define __ASM_ARCH_OMAP_PERSEUS2_H
-
-#include <mach/fpga.h>
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE		D256M_1X16_4B
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
index ed6d346ee12..27916b210f5 100644
--- a/arch/arm/plat-omap/include/mach/board-voiceblue.h
+++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h
@@ -14,7 +14,6 @@
 extern void voiceblue_wdt_enable(void);
 extern void voiceblue_wdt_disable(void);
 extern void voiceblue_wdt_ping(void);
-extern void voiceblue_reset(void);
 
 #endif /*  __ASM_ARCH_VOICEBLUE_H */
 
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 9466772fc7c..50ea79a0efa 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -17,7 +17,6 @@
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB		0x4f04
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
 #define OMAP_TAG_UART		0x4f07
@@ -133,9 +132,6 @@ struct omap_version_config {
 	char version[12];
 };
 
-
-#include <mach/board-nokia.h>
-
 struct omap_board_config_entry {
 	u16 tag;
 	u16 len;
diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/mach/clkdev.h
new file mode 100644
index 00000000000..730c49d1ebd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clkdev.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 719298554ed..073a2c5569f 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -17,11 +17,16 @@ struct module;
 struct clk;
 struct clockdomain;
 
+struct clkops {
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+};
+
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
 struct clksel_rate {
-	u8			div;
 	u32			val;
+	u8			div;
 	u8			flags;
 };
 
@@ -34,24 +39,28 @@ struct dpll_data {
 	void __iomem		*mult_div1_reg;
 	u32			mult_mask;
 	u32			div1_mask;
+	struct clk		*clk_bypass;
+	struct clk		*clk_ref;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	unsigned int		rate_tolerance;
+	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
 	u8			last_rounded_n;
-	unsigned long		last_rounded_rate;
-	unsigned int		rate_tolerance;
-	u16			max_multiplier;
+	u8			min_divider;
 	u8			max_divider;
 	u32			max_tolerance;
+	u16			max_multiplier;
 #  if defined(CONFIG_ARCH_OMAP3)
 	u8			modes;
-	void __iomem		*control_reg;
-	u32			enable_mask;
+	void __iomem		*autoidle_reg;
+	void __iomem		*idlest_reg;
+	u32			autoidle_mask;
+	u32			freqsel_mask;
+	u32			idlest_mask;
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-	void __iomem		*autoidle_reg;
-	u32			autoidle_mask;
-	void __iomem		*idlest_reg;
-	u8			idlest_bit;
 #  endif
 };
 
@@ -59,21 +68,21 @@ struct dpll_data {
 
 struct clk {
 	struct list_head	node;
-	struct module		*owner;
+	const struct clkops	*ops;
 	const char		*name;
 	int			id;
 	struct clk		*parent;
+	struct list_head	children;
+	struct list_head	sibling;	/* node for children */
 	unsigned long		rate;
 	__u32			flags;
 	void __iomem		*enable_reg;
-	__u8			enable_bit;
-	__s8			usecount;
-	void			(*recalc)(struct clk *);
+	unsigned long		(*recalc)(struct clk *);
 	int			(*set_rate)(struct clk *, unsigned long);
 	long			(*round_rate)(struct clk *, unsigned long);
 	void			(*init)(struct clk *);
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
+	__u8			enable_bit;
+	__s8			usecount;
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	u8			fixed_div;
 	void __iomem		*clksel_reg;
@@ -99,7 +108,6 @@ struct clk_functions {
 	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
 	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
 	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	struct clk *	(*clk_get_parent)(struct clk *clk);
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
 	void		(*clk_disable_unused)(struct clk *clk);
@@ -110,42 +118,33 @@ struct clk_functions {
 
 extern unsigned int mpurate;
 
-extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_init_one(struct clk *clk);
 extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
 extern void clk_unregister(struct clk *clk);
 extern void propagate_rate(struct clk *clk);
 extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk * clk);
-extern void clk_allow_idle(struct clk *clk);
-extern void clk_deny_idle(struct clk *clk);
-extern int clk_get_usecount(struct clk *clk);
+extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
+#ifdef CONFIG_CPU_FREQ
+extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+#endif
+
+extern const struct clkops clkops_null;
 
 /* Clock flags */
-#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
+/* bit 0 is free */
 #define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
-#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
-#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
-#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
+/* bits 2-4 are free */
 #define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
-#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
 #define CLOCK_IDLE_CONTROL	(1 << 7)
 #define CLOCK_NO_IDLE_PARENT	(1 << 8)
 #define DELAYED_APP		(1 << 9)	/* Delay application of clock */
 #define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
 #define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
 #define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
-/* bits 13-20 are currently free */
-#define CLOCK_IN_OMAP310	(1 << 21)
-#define CLOCK_IN_OMAP730	(1 << 22)
-#define CLOCK_IN_OMAP1510	(1 << 23)
-#define CLOCK_IN_OMAP16XX	(1 << 24)
-#define CLOCK_IN_OMAP242X	(1 << 25)
-#define CLOCK_IN_OMAP243X	(1 << 26)
-#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
-#define PARENT_CONTROLS_CLOCK	(1 << 28)
-#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
-#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
+/* bits 13-31 are currently free */
 
 /* Clksel_rate flags */
 #define DEFAULT_RATE		(1 << 0)
@@ -157,9 +156,4 @@ extern void clk_enable_init_clocks(void);
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
 
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K		0
-#define CORE_CLK_SRC_DPLL		1
-#define CORE_CLK_SRC_DPLL_X2		2
-
 #endif
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
index 1f51f017378..b9d0dd2da89 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/mach/clockdomain.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/clockdomain.h
+ * arch/arm/plat-omap/include/mach/clockdomain.h
  *
  * OMAP2/3 clockdomain framework functions
  *
@@ -48,11 +48,13 @@
  */
 struct clkdm_pwrdm_autodep {
 
-	/* Name of the powerdomain to add a wkdep/sleepdep on */
-	const char *pwrdm_name;
+	union {
+		/* Name of the powerdomain to add a wkdep/sleepdep on */
+		const char *name;
 
-	/* Powerdomain pointer (looked up at clkdm_init() time) */
-	struct powerdomain *pwrdm;
+		/* Powerdomain pointer (looked up at clkdm_init() time) */
+		struct powerdomain *ptr;
+	} pwrdm;
 
 	/* OMAP chip types that this clockdomain dep is valid on */
 	const struct omap_chip_id omap_chip;
@@ -64,8 +66,13 @@ struct clockdomain {
 	/* Clockdomain name */
 	const char *name;
 
-	/* Powerdomain enclosing this clockdomain */
-	const char *pwrdm_name;
+	union {
+		/* Powerdomain enclosing this clockdomain */
+		const char *name;
+
+		/* Powerdomain pointer assigned at clkdm_register() */
+		struct powerdomain *ptr;
+	} pwrdm;
 
 	/* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
 	const u16 clktrctrl_mask;
@@ -79,9 +86,6 @@ struct clockdomain {
 	/* Usecount tracking */
 	atomic_t usecount;
 
-	/* Powerdomain pointer assigned at clkdm_register() */
-	struct powerdomain *pwrdm;
-
 	struct list_head node;
 
 };
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index ef70e2b0f05..0ecf36deb17 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -35,7 +35,7 @@ extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(void);
 extern void omap_serial_enable_clocks(int enable);
-#ifdef CONFIG_I2C_OMAP
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
 				 unsigned len);
@@ -65,7 +65,7 @@ void omap2_set_globals_343x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index a8e1178a946..98b14425236 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -56,6 +56,14 @@ unsigned int omap_rev(void);
 #  define OMAP_NAME omap730
 # endif
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP1
@@ -105,7 +113,7 @@ unsigned int omap_rev(void);
 /*
  * Macros to group OMAP into cpu classes.
  * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730
+ * cpu_is_omap7xx():	True for OMAP730, OMAP850
  * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
  * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
  * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
@@ -153,6 +161,10 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		is_omap7xx()
 # endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
 # if defined(CONFIG_ARCH_OMAP15XX)
 #  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		is_omap15xx()
@@ -166,6 +178,10 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		1
 # endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
 # if defined(CONFIG_ARCH_OMAP15XX)
 #  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		1
@@ -219,6 +235,7 @@ IS_OMAP_SUBCLASS(343x, 0x343)
  * These are only rarely needed.
  * cpu_is_omap330():	True for OMAP330
  * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap850():	True for OMAP850
  * cpu_is_omap1510():	True for OMAP1510
  * cpu_is_omap1610():	True for OMAP1610
  * cpu_is_omap1611():	True for OMAP1611
@@ -241,6 +258,7 @@ static inline int is_omap ##type (void)			\
 
 IS_OMAP_TYPE(310, 0x0310)
 IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(850, 0x0850)
 IS_OMAP_TYPE(1510, 0x1510)
 IS_OMAP_TYPE(1610, 0x1610)
 IS_OMAP_TYPE(1611, 0x1611)
@@ -255,6 +273,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
+#define cpu_is_omap850()		0
 #define cpu_is_omap1510()		0
 #define cpu_is_omap1610()		0
 #define cpu_is_omap5912()		0
@@ -272,12 +291,22 @@ IS_OMAP_TYPE(3430, 0x3430)
 #  undef  cpu_is_omap730
 #  define cpu_is_omap730()		is_omap730()
 # endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap850
+#  define cpu_is_omap850()		is_omap850()
+# endif
 #else
 # if defined(CONFIG_ARCH_OMAP730)
 #  undef  cpu_is_omap730
 #  define cpu_is_omap730()		1
 # endif
 #endif
+#else
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap850
+#  define cpu_is_omap850()		1
+# endif
+#endif
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -320,7 +349,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #endif
 
 /* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
+#define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
 
@@ -355,13 +384,27 @@ IS_OMAP_TYPE(3430, 0x3430)
  * use omap_chip_is().
  *
  */
-#define CHIP_IS_OMAP2420       (1 << 0)
-#define CHIP_IS_OMAP2430       (1 << 1)
-#define CHIP_IS_OMAP3430       (1 << 2)
-#define CHIP_IS_OMAP3430ES1    (1 << 3)
-#define CHIP_IS_OMAP3430ES2    (1 << 4)
+#define CHIP_IS_OMAP2420		(1 << 0)
+#define CHIP_IS_OMAP2430		(1 << 1)
+#define CHIP_IS_OMAP3430		(1 << 2)
+#define CHIP_IS_OMAP3430ES1		(1 << 3)
+#define CHIP_IS_OMAP3430ES2		(1 << 4)
+#define CHIP_IS_OMAP3430ES3_0		(1 << 5)
+#define CHIP_IS_OMAP3430ES3_1		(1 << 6)
+
+#define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+/*
+ * "GE" here represents "greater than or equal to" in terms of ES
+ * levels.  So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
+ * chips at ES2 and beyond, but not, for example, any OMAP lines after
+ * OMAP3.
+ */
+#define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
+					 CHIP_IS_OMAP3430ES3_0 | \
+					 CHIP_IS_OMAP3430ES3_1)
+#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1)
 
-#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
 int omap_chip_is(struct omap_chip_id oci);
 int omap_type(void);
@@ -378,5 +421,3 @@ int omap_type(void);
 void omap2_check_revision(void);
 
 #endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 8d9dfe31438..2b22a8799bc 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -31,7 +31,8 @@
 
 #define OMAP_MPUIO_BASE			0xfffb5000
 
-#ifdef CONFIG_ARCH_OMAP730
+#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
+
 #define OMAP_MPUIO_INPUT_LATCH		0x00
 #define OMAP_MPUIO_OUTPUT		0x02
 #define OMAP_MPUIO_IO_CNTL		0x04
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 45b678439bb..921b16532ff 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -103,6 +103,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern void gpmc_init(void);
+extern void __init gpmc_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 6589ddbb63b..3dc423ed3e8 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -286,78 +286,4 @@
 #include "omap24xx.h"
 #include "omap34xx.h"
 
-#ifndef __ASSEMBLER__
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#include "board-innovator.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H2
-#include "board-h2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#include "board-perseus2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_FSAMPLE
-#include "board-fsample.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H3
-#include "board-h3.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_2430SDP
-#include "board-2430sdp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP3_BEAGLE
-#include "board-omap3beagle.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_LDP
-#include "board-ldp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_APOLLON
-#include "board-apollon.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_OSK
-#include "board-osk.h"
-#endif
-
-#ifdef CONFIG_MACH_VOICEBLUE
-#include "board-voiceblue.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-#include "board-palmte.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMZ71
-#include "board-palmz71.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTT
-#include "board-palmtt.h"
-#endif
-
-#ifdef CONFIG_MACH_SX1
-#include "board-sx1.h"
-#endif
-
-#endif /* !__ASSEMBLER__ */
-
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index d92bf796448..0610d7e2b3d 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -185,11 +185,13 @@
 #define omap_writew(v,a)	__raw_writew(v, IO_ADDRESS(a))
 #define omap_writel(v,a)	__raw_writel(v, IO_ADDRESS(a))
 
+struct omap_sdrc_params;
+
 extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
 
 extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
 
 #define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
 #define __arch_iounmap(v)	omap_iounmap(v)
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index bed5274c910..7f57ee66f36 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -105,6 +105,29 @@
 #define INT_730_SPGIO_WR	29
 
 /*
+ * OMAP-850 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_850_IH2_FIQ		0
+#define INT_850_IH2_IRQ		1
+#define INT_850_USB_NON_ISO	2
+#define INT_850_USB_ISO		3
+#define INT_850_ICR		4
+#define INT_850_EAC		5
+#define INT_850_GPIO_BANK1	6
+#define INT_850_GPIO_BANK2	7
+#define INT_850_GPIO_BANK3	8
+#define INT_850_McBSP2TX	10
+#define INT_850_McBSP2RX	11
+#define INT_850_McBSP2RX_OVF	12
+#define INT_850_LCD_LINE	14
+#define INT_850_GSM_PROTECT	15
+#define INT_850_TIMER3		16
+#define INT_850_GPIO_BANK5	17
+#define INT_850_GPIO_BANK6	18
+#define INT_850_SPGIO_WR	29
+
+
+/*
  * IRQ numbers for interrupt handler 2
  *
  * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
@@ -237,6 +260,64 @@
 #define INT_730_DMA_CH15	(62 + IH2_BASE)
 #define INT_730_NAND		(63 + IH2_BASE)
 
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_850_HW_ERRORS	(0 + IH2_BASE)
+#define INT_850_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_850_CFCD		(2 + IH2_BASE)
+#define INT_850_CFIREQ		(3 + IH2_BASE)
+#define INT_850_I2C		(4 + IH2_BASE)
+#define INT_850_PCC		(5 + IH2_BASE)
+#define INT_850_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_850_SPI_100K_1	(7 + IH2_BASE)
+#define INT_850_SYREN_SPI	(8 + IH2_BASE)
+#define INT_850_VLYNQ		(9 + IH2_BASE)
+#define INT_850_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_850_McBSP1TX	(11 + IH2_BASE)
+#define INT_850_McBSP1RX	(12 + IH2_BASE)
+#define INT_850_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_850_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_850_MCSI		(16 + IH2_BASE)
+#define INT_850_uWireTX		(17 + IH2_BASE)
+#define INT_850_uWireRX		(18 + IH2_BASE)
+#define INT_850_SMC_CD		(19 + IH2_BASE)
+#define INT_850_SMC_IREQ	(20 + IH2_BASE)
+#define INT_850_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_850_TIMER32K	(22 + IH2_BASE)
+#define INT_850_MMC_SDIO	(23 + IH2_BASE)
+#define INT_850_UPLD		(24 + IH2_BASE)
+#define INT_850_USB_HHC_1	(27 + IH2_BASE)
+#define INT_850_USB_HHC_2	(28 + IH2_BASE)
+#define INT_850_USB_GENI	(29 + IH2_BASE)
+#define INT_850_USB_OTG		(30 + IH2_BASE)
+#define INT_850_CAMERA_IF	(31 + IH2_BASE)
+#define INT_850_RNG		(32 + IH2_BASE)
+#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_850_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_850_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_850_SHA1_MD5	(36 + IH2_BASE)
+#define INT_850_SPI_100K_2	(37 + IH2_BASE)
+#define INT_850_RNG_IDLE	(38 + IH2_BASE)
+#define INT_850_MPUIO		(39 + IH2_BASE)
+#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_850_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_850_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_850_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_850_DMA_CH6		(53 + IH2_BASE)
+#define INT_850_DMA_CH7		(54 + IH2_BASE)
+#define INT_850_DMA_CH8		(55 + IH2_BASE)
+#define INT_850_DMA_CH9		(56 + IH2_BASE)
+#define INT_850_DMA_CH10	(57 + IH2_BASE)
+#define INT_850_DMA_CH11	(58 + IH2_BASE)
+#define INT_850_DMA_CH12	(59 + IH2_BASE)
+#define INT_850_DMA_CH13	(60 + IH2_BASE)
+#define INT_850_DMA_CH14	(61 + IH2_BASE)
+#define INT_850_DMA_CH15	(62 + IH2_BASE)
+#define INT_850_NAND		(63 + IH2_BASE)
+
 #define INT_24XX_SYS_NIRQ	7
 #define INT_24XX_SDMA_IRQ0	12
 #define INT_24XX_SDMA_IRQ1	13
@@ -341,7 +422,7 @@
 
 #define	INT_34XX_BENCH_MPU_EMUL	3
 
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
 #define IH_GPIO_BASE		(128 + IH2_BASE)
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
index 7cbed9332e1..b7a6991814e 100644
--- a/arch/arm/plat-omap/include/mach/mailbox.h
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
@@ -33,6 +33,9 @@ struct omap_mbox_ops {
 	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	/* ctx */
+	void		(*save_ctx)(struct omap_mbox *mbox);
+	void		(*restore_ctx)(struct omap_mbox *mbox);
 };
 
 struct omap_mbox_queue {
@@ -53,7 +56,7 @@ struct omap_mbox {
 
 	mbox_msg_t		seq_snd, seq_rcv;
 
-	struct device		dev;
+	struct device		*dev;
 
 	struct omap_mbox	*next;
 	void			*priv;
@@ -67,7 +70,27 @@ void omap_mbox_init_seq(struct omap_mbox *);
 struct omap_mbox *omap_mbox_get(const char *);
 void omap_mbox_put(struct omap_mbox *);
 
-int omap_mbox_register(struct omap_mbox *);
+int omap_mbox_register(struct device *parent, struct omap_mbox *);
 int omap_mbox_unregister(struct omap_mbox *);
 
+static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
+{
+	if (!mbox->ops->save_ctx) {
+		dev_err(mbox->dev, "%s:\tno save\n", __func__);
+		return;
+	}
+
+	mbox->ops->save_ctx(mbox);
+}
+
+static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+	if (!mbox->ops->restore_ctx) {
+		dev_err(mbox->dev, "%s:\tno restore\n", __func__);
+		return;
+	}
+
+	mbox->ops->restore_ctx(mbox);
+}
+
 #endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 113c2466c86..bb154ea7676 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -344,8 +344,6 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
-	char const **clk_names;
-	int num_clks;
 };
 
 struct omap_mcbsp {
@@ -377,8 +375,8 @@ struct omap_mcbsp {
 	/* Protect the field .free, while checking if the mcbsp is in use */
 	spinlock_t lock;
 	struct omap_mcbsp_platform_data *pdata;
-	struct clk **clks;
-	int num_clks;
+	struct clk *iclk;
+	struct clk *fclk;
 };
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count;
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index d6b5ca6c7da..99ed564d927 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -61,9 +61,11 @@
 #define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
 #define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
 
-#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
-					(dma_addr_t)virt_to_lbus(page_address(page)) : \
-					(dma_addr_t)__virt_to_phys(page_address(page));})
+#define __arch_page_to_dma(dev, page)	\
+	({ dma_addr_t __dma = page_to_phys(page); \
+	   if (is_lbus_device(dev)) \
+		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+	   __dma; })
 
 #define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
 						lbus_to_virt(addr) : \
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 73a9e15031b..4435bd434e1 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -37,6 +37,8 @@
 #define OMAP_MMC_MAX_SLOTS	2
 
 struct omap_mmc_platform_data {
+	/* back-link to device */
+	struct device *dev;
 
 	/* number of slots per controller */
 	unsigned nr_slots:2;
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index f4362b8682c..85a62170576 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -61,6 +61,16 @@
 					.pull_bit = bit, \
 					.pull_val = status,
 
+#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
+					.mux_reg = OMAP850_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_850(reg, bit, status)	.pull_name = "OMAP850_IO_CONF_"#reg, \
+					.pull_reg = OMAP850_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #else
 
 #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
@@ -83,6 +93,15 @@
 					.pull_bit = bit, \
 					.pull_val = status,
 
+#define MUX_REG_850(reg, mode_offset, mode) \
+					.mux_reg = OMAP850_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_850(reg, bit, status)	.pull_reg = OMAP850_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #endif /* CONFIG_OMAP_MUX_DEBUG */
 
 #define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
@@ -98,7 +117,7 @@
 
 
 /*
- * OMAP730 has a slightly different config for the pin mux.
+ * OMAP730/850 has a slightly different config for the pin mux.
  * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
  *   not the FUNC_MUX_CTRL_x regs from hardware.h
  * - for pull-up/down, only has one enable bit which is is in the same register
@@ -114,6 +133,17 @@
 	PU_PD_REG(NA, 0)		\
 },
 
+#define MUX_CFG_850(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_850(mux_reg, mode_offset, mode)		\
+	PULL_REG_850(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+
 #define MUX_CFG_24XX(desc, reg_offset, mode,			\
 				pull_en, pull_mode, dbg)	\
 {								\
@@ -221,6 +251,26 @@ enum omap730_index {
 	W17_730_USB_VBUSI,
 };
 
+enum omap850_index {
+	/* OMAP 850 keyboard */
+	E2_850_KBR0,
+	J7_850_KBR1,
+	E1_850_KBR2,
+	F3_850_KBR3,
+	D2_850_KBR4,
+	C2_850_KBC0,
+	D3_850_KBC1,
+	E4_850_KBC2,
+	F4_850_KBC3,
+	E3_850_KBC4,
+
+	/* USB */
+	AA17_850_USB_DM,
+	W16_850_USB_PU_EN,
+	W17_850_USB_VBUSI,
+};
+
+
 enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,
@@ -788,7 +838,20 @@ enum omap34xx_index {
 	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
 	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
 	 */
+	AF26_34XX_GPIO0,
+	AF22_34XX_GPIO9,
 	AH8_34XX_GPIO29,
+	U8_34XX_GPIO54_OUT,
+	U8_34XX_GPIO54_DOWN,
+	L8_34XX_GPIO63,
+	G25_34XX_GPIO86_OUT,
+	AG4_34XX_GPIO134_OUT,
+	AE4_34XX_GPIO136_OUT,
+	AF6_34XX_GPIO140_UP,
+	AE6_34XX_GPIO141,
+	AF5_34XX_GPIO142,
+	AE5_34XX_GPIO143,
+	H19_34XX_GPIO164_OUT,
 	J25_34XX_GPIO170,
 };
 
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index 8e0479fff05..1b1c35d2169 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -49,6 +49,33 @@
 #define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
 
 #define OMAP34XX_IC_BASE	0x48200000
+
+#define OMAP3430_ISP_BASE		(L4_34XX_BASE + 0xBC000)
+#define OMAP3430_ISP_CBUFF_BASE		(OMAP3430_ISP_BASE + 0x0100)
+#define OMAP3430_ISP_CCP2_BASE		(OMAP3430_ISP_BASE + 0x0400)
+#define OMAP3430_ISP_CCDC_BASE		(OMAP3430_ISP_BASE + 0x0600)
+#define OMAP3430_ISP_HIST_BASE		(OMAP3430_ISP_BASE + 0x0A00)
+#define OMAP3430_ISP_H3A_BASE		(OMAP3430_ISP_BASE + 0x0C00)
+#define OMAP3430_ISP_PREV_BASE		(OMAP3430_ISP_BASE + 0x0E00)
+#define OMAP3430_ISP_RESZ_BASE		(OMAP3430_ISP_BASE + 0x1000)
+#define OMAP3430_ISP_SBL_BASE		(OMAP3430_ISP_BASE + 0x1200)
+#define OMAP3430_ISP_MMU_BASE		(OMAP3430_ISP_BASE + 0x1400)
+#define OMAP3430_ISP_CSI2A_BASE		(OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSI2PHY_BASE	(OMAP3430_ISP_BASE + 0x1970)
+
+#define OMAP3430_ISP_END		(OMAP3430_ISP_BASE         + 0x06F)
+#define OMAP3430_ISP_CBUFF_END		(OMAP3430_ISP_CBUFF_BASE   + 0x077)
+#define OMAP3430_ISP_CCP2_END		(OMAP3430_ISP_CCP2_BASE    + 0x1EF)
+#define OMAP3430_ISP_CCDC_END		(OMAP3430_ISP_CCDC_BASE    + 0x0A7)
+#define OMAP3430_ISP_HIST_END		(OMAP3430_ISP_HIST_BASE    + 0x047)
+#define OMAP3430_ISP_H3A_END		(OMAP3430_ISP_H3A_BASE     + 0x05F)
+#define OMAP3430_ISP_PREV_END		(OMAP3430_ISP_PREV_BASE    + 0x09F)
+#define OMAP3430_ISP_RESZ_END		(OMAP3430_ISP_RESZ_BASE    + 0x0AB)
+#define OMAP3430_ISP_SBL_END		(OMAP3430_ISP_SBL_BASE     + 0x0FB)
+#define OMAP3430_ISP_MMU_END		(OMAP3430_ISP_MMU_BASE     + 0x06F)
+#define OMAP3430_ISP_CSI2A_END		(OMAP3430_ISP_CSI2A_BASE   + 0x16F)
+#define OMAP3430_ISP_CSI2PHY_END	(OMAP3430_ISP_CSI2PHY_BASE + 0x007)
+
 #define OMAP34XX_IVA_INTC_BASE	0x40000000
 #define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
 #define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
@@ -61,6 +88,7 @@
 #define OMAP2_CM_BASE			OMAP3430_CM_BASE
 #define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
 #define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/mach/omap850.h
new file mode 100644
index 00000000000..c33f6798171
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap850.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap850.h
+ *
+ * Hardware definitions for TI OMAP850 processor.
+ *
+ * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP850_H
+#define __ASM_ARCH_OMAP850_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP850_DSP_BASE	0xE0000000
+#define OMAP850_DSP_SIZE	0x50000
+#define OMAP850_DSP_START	0xE0000000
+
+#define OMAP850_DSPREG_BASE	0xE1000000
+#define OMAP850_DSPREG_SIZE	SZ_128K
+#define OMAP850_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_CONFIG_BASE	0xfffe1000
+#define OMAP850_IO_CONF_0	0xfffe1070
+#define OMAP850_IO_CONF_1	0xfffe1074
+#define OMAP850_IO_CONF_2	0xfffe1078
+#define OMAP850_IO_CONF_3	0xfffe107c
+#define OMAP850_IO_CONF_4	0xfffe1080
+#define OMAP850_IO_CONF_5	0xfffe1084
+#define OMAP850_IO_CONF_6	0xfffe1088
+#define OMAP850_IO_CONF_7	0xfffe108c
+#define OMAP850_IO_CONF_8	0xfffe1090
+#define OMAP850_IO_CONF_9	0xfffe1094
+#define OMAP850_IO_CONF_10	0xfffe1098
+#define OMAP850_IO_CONF_11	0xfffe109c
+#define OMAP850_IO_CONF_12	0xfffe10a0
+#define OMAP850_IO_CONF_13	0xfffe10a4
+
+#define OMAP850_MODE_1		0xfffe1010
+#define OMAP850_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP850_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_FLASH_CFG_0	0xfffecc10
+#define OMAP850_FLASH_ACFG_0	0xfffecc50
+#define OMAP850_FLASH_CFG_1	0xfffecc14
+#define OMAP850_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_ICR_BASE	0xfffbb800
+#define OMAP850_DSP_M_CTL	0xfffbb804
+#define OMAP850_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP850_PCC_UPLD_CTRL		(OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP850_H */
+
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 2a9c27ad4c3..ce6ee792753 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -108,7 +108,7 @@
 	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX) && \
 	!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
+#warning "Power management for this processor not implemented yet"
 #endif
 
 #ifndef __ASSEMBLER__
@@ -118,18 +118,6 @@
 extern void prevent_idle_sleep(void);
 extern void allow_idle_sleep(void);
 
-/**
- * clk_deny_idle - Prevents the clock from being idled during MPU idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-/**
- * clk_allow_idle - Counters previous clk_deny_idle
- * @clk: clock signal handle
- */
-void clk_allow_idle(struct clk *clk);
-
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 2806a9c8e4d..69c9e675d8e 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -50,9 +50,9 @@
 
 /*
  * Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain is probably the worst case.
+ * CORE powerdomain on OMAP3 is the worst case
  */
-#define PWRDM_MAX_CLKDMS	3
+#define PWRDM_MAX_CLKDMS	4
 
 /* XXX A completely arbitrary number. What is reasonable here? */
 #define PWRDM_TRANSITION_BAILOUT 100000
@@ -145,6 +145,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
 
 int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
 int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_pwrst(struct powerdomain *pwrdm);
 int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
 int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
 
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 56eba0fd6f6..24ac3c71591 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -20,10 +20,11 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
-#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
-#define __ASM_ARM_ARCH_DPM_PRCM_H
+#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
+#define __ASM_ARM_ARCH_OMAP_PRCM_H
 
 u32 omap_prcm_get_reset_sources(void);
+void omap_prcm_arch_reset(char mode);
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index a98c6c3beb2..adc73522491 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -4,10 +4,12 @@
 /*
  * OMAP2/3 SDRC/SMS register definitions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
- * Written by Paul Walmsley
+ * Tony Lindgren
+ * Paul Walmsley
+ * Richard Woodruff
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -64,14 +66,62 @@
  * SMS register access
  */
 
-
-#define OMAP242X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+#define OMAP242X_SMS_REGADDR(reg)					\
+			(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)					\
+			(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)					\
+			(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
 #define SMS_SYSCONFIG		0x010
 /* REVISIT: fill in other SMS registers here */
 
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip.  These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files.  The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+	unsigned long rate;
+	u32 actim_ctrla;
+	u32 actim_ctrlb;
+	u32 rfr_ctrl;
+	u32 mr;
+};
+
+void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
+struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+
+#ifdef CONFIG_ARCH_OMAP2
+
+struct memory_timings {
+	u32 m_type;		/* ddr = 1, sdr = 0 */
+	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
+	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
+	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
+	u32 base_cs;		/* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+#endif  /* CONFIG_ARCH_OMAP2 */
+
+#endif  /* __ASSEMBLER__ */
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06923f26154..1060e345423 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -9,12 +9,14 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
+#include <mach/prcm.h>
+
 #ifndef CONFIG_MACH_VOICEBLUE
 #define voiceblue_reset()		do {} while (0)
+#else
+extern void voiceblue_reset(void);
 #endif
 
-extern void omap_prcm_arch_reset(char mode);
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
@@ -38,7 +40,7 @@ static inline void omap1_arch_reset(char mode)
 		omap_writew(1, ARM_RSTCT1);
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if (!cpu_class_is_omap2())
 		omap1_arch_reset(mode);
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index a56a610950c..69f0ceed500 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,8 +27,18 @@
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
 
+#ifdef CONFIG_USB_MUSB_SOC
+extern void usb_musb_init(void);
+#else
+static inline void usb_musb_init(void)
+{
+}
+#endif
+
 #endif
 
+void omap_usb_init(struct omap_usb_config *pdata);
+
 /*-------------------------------------------------------------------------*/
 
 /*
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index b52ce053e6f..0abfbaa5987 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -1,10 +1,9 @@
 /*
  * OMAP mailbox driver
  *
- * Copyright (C) 2006 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
  *
- * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
- *		Restructured by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -22,21 +21,98 @@
  *
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
-#include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
-#include <linux/blkdev.h>
-#include <linux/err.h>
 #include <linux/delay.h>
-#include <linux/io.h>
+
 #include <mach/mailbox.h>
-#include "mailbox.h"
+
+static int enable_seq_bit;
+module_param(enable_seq_bit, bool, 0);
+MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking.");
 
 static struct omap_mbox *mboxes;
 static DEFINE_RWLOCK(mboxes_lock);
 
+/*
+ * Mailbox sequence bit API
+ */
+
+/* seq_rcv should be initialized with any value other than
+ * 0 and 1 << 31, to allow either value for the first
+ * message.  */
+static inline void mbox_seq_init(struct omap_mbox *mbox)
+{
+	if (!enable_seq_bit)
+		return;
+
+	/* any value other than 0 and 1 << 31 */
+	mbox->seq_rcv = 0xffffffff;
+}
+
+static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
+{
+	if (!enable_seq_bit)
+		return;
+
+	/* add seq_snd to msg */
+	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
+	/* flip seq_snd */
+	mbox->seq_snd ^= 1 << 31;
+}
+
+static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+	mbox_msg_t seq;
+
+	if (!enable_seq_bit)
+		return 0;
+
+	seq = msg & (1 << 31);
+	if (seq == mbox->seq_rcv)
+		return -1;
+	mbox->seq_rcv = seq;
+	return 0;
+}
+
+/* Mailbox FIFO handle functions */
+static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
+{
+	return mbox->ops->fifo_read(mbox);
+}
+static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+	mbox->ops->fifo_write(mbox, msg);
+}
+static inline int mbox_fifo_empty(struct omap_mbox *mbox)
+{
+	return mbox->ops->fifo_empty(mbox);
+}
+static inline int mbox_fifo_full(struct omap_mbox *mbox)
+{
+	return mbox->ops->fifo_full(mbox);
+}
+
+/* Mailbox IRQ handle functions */
+static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+	mbox->ops->enable_irq(mbox, irq);
+}
+static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+	mbox->ops->disable_irq(mbox, irq);
+}
+static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+	if (mbox->ops->ack_irq)
+		mbox->ops->ack_irq(mbox, irq);
+}
+static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+	return mbox->ops->is_irq(mbox, irq);
+}
+
 /* Mailbox Sequence Bit function */
 void omap_mbox_init_seq(struct omap_mbox *mbox)
 {
@@ -136,7 +212,7 @@ static void mbox_rx_work(struct work_struct *work)
 	unsigned long flags;
 
 	if (mbox->rxq->callback == NULL) {
-		sysfs_notify(&mbox->dev.kobj, NULL, "mbox");
+		sysfs_notify(&mbox->dev->kobj, NULL, "mbox");
 		return;
 	}
 
@@ -204,7 +280,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 	/* no more messages in the fifo. clear IRQ source. */
 	ack_mbox_irq(mbox, IRQ_RX);
 	enable_mbox_irq(mbox, IRQ_RX);
-	nomem:
+nomem:
 	schedule_work(&mbox->rxq->work);
 }
 
@@ -286,7 +362,7 @@ static ssize_t mbox_show(struct class *class, char *buf)
 static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL);
 
 static struct class omap_mbox_class = {
-	.name = "omap_mbox",
+	.name = "omap-mailbox",
 };
 
 static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
@@ -333,21 +409,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 			return ret;
 	}
 
-	mbox->dev.class = &omap_mbox_class;
-	dev_set_name(&mbox->dev, "%s", mbox->name);
-	dev_set_drvdata(&mbox->dev, mbox);
-
-	ret = device_register(&mbox->dev);
-	if (unlikely(ret))
-		goto fail_device_reg;
-
-	ret = device_create_file(&mbox->dev, &dev_attr_mbox);
-	if (unlikely(ret)) {
-		printk(KERN_ERR
-			"device_create_file failed: %d\n", ret);
-		goto fail_create_mbox;
-	}
-
 	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED,
 				mbox->name, mbox);
 	if (unlikely(ret)) {
@@ -377,10 +438,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
  fail_alloc_txq:
 	free_irq(mbox->irq, mbox);
  fail_request_irq:
-	device_remove_file(&mbox->dev, &dev_attr_mbox);
- fail_create_mbox:
-	device_unregister(&mbox->dev);
- fail_device_reg:
 	if (unlikely(mbox->ops->shutdown))
 		mbox->ops->shutdown(mbox);
 
@@ -393,8 +450,6 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
 	mbox_queue_free(mbox->rxq);
 
 	free_irq(mbox->irq, mbox);
-	device_remove_file(&mbox->dev, &dev_attr_mbox);
-	class_unregister(&omap_mbox_class);
 
 	if (unlikely(mbox->ops->shutdown))
 		mbox->ops->shutdown(mbox);
@@ -440,7 +495,7 @@ void omap_mbox_put(struct omap_mbox *mbox)
 }
 EXPORT_SYMBOL(omap_mbox_put);
 
-int omap_mbox_register(struct omap_mbox *mbox)
+int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
 {
 	int ret = 0;
 	struct omap_mbox **tmp;
@@ -450,14 +505,31 @@ int omap_mbox_register(struct omap_mbox *mbox)
 	if (mbox->next)
 		return -EBUSY;
 
+	mbox->dev = device_create(&omap_mbox_class,
+				  parent, 0, mbox, "%s", mbox->name);
+	if (IS_ERR(mbox->dev))
+		return PTR_ERR(mbox->dev);
+
+	ret = device_create_file(mbox->dev, &dev_attr_mbox);
+	if (ret)
+		goto err_sysfs;
+
 	write_lock(&mboxes_lock);
 	tmp = find_mboxes(mbox->name);
-	if (*tmp)
+	if (*tmp) {
 		ret = -EBUSY;
-	else
-		*tmp = mbox;
+		write_unlock(&mboxes_lock);
+		goto err_find;
+	}
+	*tmp = mbox;
 	write_unlock(&mboxes_lock);
 
+	return 0;
+
+err_find:
+	device_remove_file(mbox->dev, &dev_attr_mbox);
+err_sysfs:
+	device_unregister(mbox->dev);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_register);
@@ -473,6 +545,8 @@ int omap_mbox_unregister(struct omap_mbox *mbox)
 			*tmp = mbox->next;
 			mbox->next = NULL;
 			write_unlock(&mboxes_lock);
+			device_remove_file(mbox->dev, &dev_attr_mbox);
+			device_unregister(mbox->dev);
 			return 0;
 		}
 		tmp = &(*tmp)->next;
@@ -501,4 +575,6 @@ static void __exit omap_mbox_class_exit(void)
 subsys_initcall(omap_mbox_class_init);
 module_exit(omap_mbox_class_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
+MODULE_AUTHOR("Toshihiro Kobayashi and Hiroshi DOYU");
diff --git a/arch/arm/plat-omap/mailbox.h b/arch/arm/plat-omap/mailbox.h
deleted file mode 100644
index 67c6740b8ad..00000000000
--- a/arch/arm/plat-omap/mailbox.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Mailbox internal functions
- *
- * Copyright (C) 2006 Nokia Corporation
- * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ARCH_ARM_PLAT_MAILBOX_H
-#define __ARCH_ARM_PLAT_MAILBOX_H
-
-/*
- * Mailbox sequence bit API
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#  define MBOX_USE_SEQ_BIT
-#elif defined(CONFIG_ARCH_OMAP2)
-#  define MBOX_USE_SEQ_BIT
-#endif
-
-#ifdef MBOX_USE_SEQ_BIT
-/* seq_rcv should be initialized with any value other than
- * 0 and 1 << 31, to allow either value for the first
- * message.  */
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-	/* any value other than 0 and 1 << 31 */
-	mbox->seq_rcv = 0xffffffff;
-}
-
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-	/* add seq_snd to msg */
-	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
-	/* flip seq_snd */
-	mbox->seq_snd ^= 1 << 31;
-}
-
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox_msg_t seq = msg & (1 << 31);
-	if (seq == mbox->seq_rcv)
-		return -1;
-	mbox->seq_rcv = seq;
-	return 0;
-}
-#else
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-}
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-}
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	return 0;
-}
-#endif
-
-/* Mailbox FIFO handle functions */
-static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_read(mbox);
-}
-static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox->ops->fifo_write(mbox, msg);
-}
-static inline int mbox_fifo_empty(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_empty(mbox);
-}
-static inline int mbox_fifo_full(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_full(mbox);
-}
-
-/* Mailbox IRQ handle functions */
-static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->enable_irq(mbox, irq);
-}
-static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->disable_irq(mbox, irq);
-}
-static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	if (mbox->ops->ack_irq)
-		mbox->ops->ack_irq(mbox, irq);
-}
-static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	return mbox->ops->is_irq(mbox, irq);
-}
-
-#endif				/* __ARCH_ARM_PLAT_MAILBOX_H */
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e5842e30e53..28b0a824b8c 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -214,7 +214,6 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 int omap_mcbsp_request(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
-	int i;
 	int err;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -223,23 +222,23 @@ int omap_mcbsp_request(unsigned int id)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
-		mcbsp->pdata->ops->request(id);
-
-	for (i = 0; i < mcbsp->num_clks; i++)
-		clk_enable(mcbsp->clks[i]);
-
 	spin_lock(&mcbsp->lock);
 	if (!mcbsp->free) {
 		dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
 			mcbsp->id);
 		spin_unlock(&mcbsp->lock);
-		return -1;
+		return -EBUSY;
 	}
 
 	mcbsp->free = 0;
 	spin_unlock(&mcbsp->lock);
 
+	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
+		mcbsp->pdata->ops->request(id);
+
+	clk_enable(mcbsp->iclk);
+	clk_enable(mcbsp->fclk);
+
 	/*
 	 * Make sure that transmitter, receiver and sample-rate generator are
 	 * not running before activating IRQs.
@@ -278,7 +277,6 @@ EXPORT_SYMBOL(omap_mcbsp_request);
 void omap_mcbsp_free(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
-	int i;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -289,8 +287,14 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);
 
-	for (i = mcbsp->num_clks - 1; i >= 0; i--)
-		clk_disable(mcbsp->clks[i]);
+	clk_disable(mcbsp->fclk);
+	clk_disable(mcbsp->iclk);
+
+	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
+		/* Free IRQs */
+		free_irq(mcbsp->rx_irq, (void *)mcbsp);
+		free_irq(mcbsp->tx_irq, (void *)mcbsp);
+	}
 
 	spin_lock(&mcbsp->lock);
 	if (mcbsp->free) {
@@ -302,12 +306,6 @@ void omap_mcbsp_free(unsigned int id)
 
 	mcbsp->free = 1;
 	spin_unlock(&mcbsp->lock);
-
-	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
-		/* Free IRQs */
-		free_irq(mcbsp->rx_irq, (void *)mcbsp);
-		free_irq(mcbsp->tx_irq, (void *)mcbsp);
-	}
 }
 EXPORT_SYMBOL(omap_mcbsp_free);
 
@@ -876,7 +874,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
 	struct omap_mcbsp *mcbsp;
 	int id = pdev->id - 1;
-	int i;
 	int ret = 0;
 
 	if (!pdata) {
@@ -899,7 +896,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 		ret = -ENOMEM;
 		goto exit;
 	}
-	mcbsp_ptr[id] = mcbsp;
 
 	spin_lock_init(&mcbsp->lock);
 	mcbsp->id = id + 1;
@@ -921,39 +917,32 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dma_rx_sync = pdata->dma_rx_sync;
 	mcbsp->dma_tx_sync = pdata->dma_tx_sync;
 
-	if (pdata->num_clks) {
-		mcbsp->num_clks = pdata->num_clks;
-		mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
-					GFP_KERNEL);
-		if (!mcbsp->clks) {
-			ret = -ENOMEM;
-			goto exit;
-		}
-		for (i = 0; i < mcbsp->num_clks; i++) {
-			mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
-			if (IS_ERR(mcbsp->clks[i])) {
-				dev_err(&pdev->dev,
-					"Invalid %s configuration for McBSP%d.\n",
-					pdata->clk_names[i], mcbsp->id);
-				ret = PTR_ERR(mcbsp->clks[i]);
-				goto err_clk;
-			}
-		}
+	mcbsp->iclk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(mcbsp->iclk)) {
+		ret = PTR_ERR(mcbsp->iclk);
+		dev_err(&pdev->dev, "unable to get ick: %d\n", ret);
+		goto err_iclk;
+	}
 
+	mcbsp->fclk = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(mcbsp->fclk)) {
+		ret = PTR_ERR(mcbsp->fclk);
+		dev_err(&pdev->dev, "unable to get fck: %d\n", ret);
+		goto err_fclk;
 	}
 
 	mcbsp->pdata = pdata;
 	mcbsp->dev = &pdev->dev;
+	mcbsp_ptr[id] = mcbsp;
 	platform_set_drvdata(pdev, mcbsp);
 	return 0;
 
-err_clk:
-	while (i--)
-		clk_put(mcbsp->clks[i]);
-	kfree(mcbsp->clks);
+err_fclk:
+	clk_put(mcbsp->iclk);
+err_iclk:
 	iounmap(mcbsp->io_base);
 err_ioremap:
-	mcbsp->free = 0;
+	kfree(mcbsp);
 exit:
 	return ret;
 }
@@ -961,7 +950,6 @@ exit:
 static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 {
 	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
-	int i;
 
 	platform_set_drvdata(pdev, NULL);
 	if (mcbsp) {
@@ -970,18 +958,15 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);
 
-		for (i = mcbsp->num_clks - 1; i >= 0; i--) {
-			clk_disable(mcbsp->clks[i]);
-			clk_put(mcbsp->clks[i]);
-		}
+		clk_disable(mcbsp->fclk);
+		clk_disable(mcbsp->iclk);
+		clk_put(mcbsp->fclk);
+		clk_put(mcbsp->iclk);
 
 		iounmap(mcbsp->io_base);
 
-		if (mcbsp->num_clks) {
-			kfree(mcbsp->clks);
-			mcbsp->clks = NULL;
-			mcbsp->num_clks = 0;
-		}
+		mcbsp->fclk = NULL;
+		mcbsp->iclk = NULL;
 		mcbsp->free = 0;
 		mcbsp->dev = NULL;
 	}
@@ -1002,4 +987,3 @@ int __init omap_mcbsp_init(void)
 	/* Register the McBSP driver */
 	return platform_driver_register(&omap_mcbsp_driver);
 }
-
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index be7bcaf2b83..fa5297d643d 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -148,7 +148,7 @@ void __init omap_detect_sram(void)
 		omap_sram_base = OMAP1_SRAM_VA;
 		omap_sram_start = OMAP1_SRAM_PA;
 
-		if (cpu_is_omap730())
+		if (cpu_is_omap7xx())
 			omap_sram_size = 0x32000;	/* 200K */
 		else if (cpu_is_omap15xx())
 			omap_sram_size = 0x30000;	/* 192K */
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index e278de6862a..509f2ed99e2 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -729,30 +729,13 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 
 /*-------------------------------------------------------------------------*/
 
-static struct omap_usb_config platform_data;
-
-static int __init
-omap_usb_init(void)
+void __init omap_usb_init(struct omap_usb_config *pdata)
 {
-	const struct omap_usb_config *config;
-
-	config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config);
-	if (config == NULL) {
-		printk(KERN_ERR "USB: No board-specific "
-				"platform config found\n");
-		return -ENODEV;
-	}
-	platform_data = *config;
-
 	if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
-		omap_otg_init(&platform_data);
+		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
-		omap_1510_usb_init(&platform_data);
-	else {
+		omap_1510_usb_init(pdata);
+	else
 		printk(KERN_ERR "USB: No init for your chip yet\n");
-		return -ENODEV;
-	}
-	return 0;
 }
 
-subsys_initcall(omap_usb_init);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 0d12c216476..32eb9e33beb 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -19,7 +19,8 @@
 
 static DEFINE_SPINLOCK(gpio_lock);
 static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
-static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
+static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
+static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
 
 static inline void __set_direction(unsigned pin, int input)
 {
@@ -53,7 +54,7 @@ int gpio_direction_input(unsigned pin)
 {
 	unsigned long flags;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
@@ -83,7 +84,7 @@ int gpio_direction_output(unsigned pin, int value)
 	unsigned long flags;
 	u32 u;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
@@ -161,7 +162,9 @@ int gpio_request(unsigned pin, const char *label)
 	unsigned long flags;
 	int ret;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+	if (pin >= GPIO_MAX ||
+	    !(test_bit(pin, gpio_valid_input) ||
+	      test_bit(pin, gpio_valid_output))) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
@@ -183,7 +186,9 @@ EXPORT_SYMBOL(gpio_request);
 
 void gpio_free(unsigned pin)
 {
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+	if (pin >= GPIO_MAX ||
+	    !(test_bit(pin, gpio_valid_input) ||
+	      test_bit(pin, gpio_valid_output))) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return;
 	}
@@ -208,12 +213,18 @@ void __init orion_gpio_set_unused(unsigned pin)
 	__set_direction(pin, 0);
 }
 
-void __init orion_gpio_set_valid(unsigned pin, int valid)
+void __init orion_gpio_set_valid(unsigned pin, int mode)
 {
-	if (valid)
-		__set_bit(pin, gpio_valid);
+	if (mode == 1)
+		mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
+	if (mode & GPIO_INPUT_OK)
+		__set_bit(pin, gpio_valid_input);
 	else
-		__clear_bit(pin, gpio_valid);
+		__clear_bit(pin, gpio_valid_input);
+	if (mode & GPIO_OUTPUT_OK)
+		__set_bit(pin, gpio_valid_output);
+	else
+		__clear_bit(pin, gpio_valid_output);
 }
 
 void orion_gpio_set_blink(unsigned pin, int blink)
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index ec743e82c87..33f6c6aec18 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -25,9 +25,13 @@ void gpio_set_value(unsigned pin, int value);
  * Orion-specific GPIO API extensions.
  */
 void orion_gpio_set_unused(unsigned pin);
-void orion_gpio_set_valid(unsigned pin, int valid);
 void orion_gpio_set_blink(unsigned pin, int blink);
 
+#define GPIO_BIDI_OK		(1 << 0)
+#define GPIO_INPUT_OK		(1 << 1)
+#define GPIO_OUTPUT_OK		(1 << 2)
+void orion_gpio_set_valid(unsigned pin, int mode);
+
 /*
  * GPIO interrupt handling.
  */
diff --git a/arch/arm/plat-orion/include/plat/mvsdio.h b/arch/arm/plat-orion/include/plat/mvsdio.h
new file mode 100644
index 00000000000..14ca8867600
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/mvsdio.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-orion/include/plat/mvsdio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVSDIO_H
+#define __MACH_MVSDIO_H
+
+#include <linux/mbus.h>
+
+struct mvsdio_platform_data {
+	struct mbus_dram_target_info *dram;
+	unsigned int clock;
+	int gpio_card_detect;
+	int gpio_write_protect;
+};
+
+#endif
diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig
new file mode 100644
index 00000000000..b158e98038e
--- /dev/null
+++ b/arch/arm/plat-pxa/Kconfig
@@ -0,0 +1,3 @@
+if PLAT_PXA
+
+endif
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
new file mode 100644
index 00000000000..4be37235f57
--- /dev/null
+++ b/arch/arm/plat-pxa/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for code common across different PXA processor families
+#
+
+obj-y	:= dma.o mfp.o
+
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 7de17fc5d54..70aeee407f7 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-pxa/dma.c
+ *  linux/arch/arm/plat-pxa/dma.c
  *
  *  PXA DMA registration and IRQ dispatching
  *
@@ -23,8 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/dma.h>
 
-#include <mach/pxa-regs.h>
-
 struct dma_channel {
 	char *name;
 	pxa_dma_prio prio;
@@ -36,8 +34,8 @@ static struct dma_channel *dma_channels;
 static int num_dma_channels;
 
 int pxa_request_dma (char *name, pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-		 	 void *data)
+			void (*irq_handler)(int, void *),
+			void *data)
 {
 	unsigned long flags;
 	int i, found = 0;
@@ -113,7 +111,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int __init pxa_init_dma(int num_ch)
+int __init pxa_init_dma(int irq, int num_ch)
 {
 	int i, ret;
 
@@ -131,7 +129,7 @@ int __init pxa_init_dma(int num_ch)
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
 	}
 
-	ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
 	if (ret) {
 		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
 		kfree(dma_channels);
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
new file mode 100644
index 00000000000..af819bf21b6
--- /dev/null
+++ b/arch/arm/plat-pxa/gpio.c
@@ -0,0 +1,337 @@
+/*
+ *  linux/arch/arm/plat-pxa/gpio.c
+ *
+ *  Generic PXA GPIO handling
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/bootmem.h>
+
+#include <mach/gpio.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem	*regbase;
+	char label[10];
+
+	unsigned long	irq_mask;
+	unsigned long	irq_edge_rise;
+	unsigned long	irq_edge_fall;
+
+#ifdef CONFIG_PM
+	unsigned long	saved_gplr;
+	unsigned long	saved_gpdr;
+	unsigned long	saved_grer;
+	unsigned long	saved_gfer;
+#endif
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c)			\
+	for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+{
+	return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t value, mask = 1 << offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	value = __raw_readl(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		value |= mask;
+	else
+		value &= ~mask;
+	__raw_writel(value, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t tmp, mask = 1 << offset;
+	unsigned long flags;
+
+	__raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	tmp = __raw_readl(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		tmp &= ~mask;
+	else
+		tmp |= mask;
+	__raw_writel(tmp, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	__raw_writel(1 << offset, gpio_chip_base(chip) +
+				(value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+	struct pxa_gpio_chip *chips;
+
+	/* this is early, we have to use bootmem allocator, and we really
+	 * want this to be allocated dynamically for different 'gpio_end'
+	 */
+	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+	if (chips == NULL) {
+		pr_err("%s: failed to allocate GPIO chips\n", __func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+		struct gpio_chip *c = &chips[i].chip;
+
+		sprintf(chips[i].label, "gpio-%d", i);
+		chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+
+		c->base  = gpio;
+		c->label = chips[i].label;
+
+		c->direction_input  = pxa_gpio_direction_input;
+		c->direction_output = pxa_gpio_direction_output;
+		c->get = pxa_gpio_get;
+		c->set = pxa_gpio_set;
+
+		/* number of GPIOs on last bank may be less than 32 */
+		c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+		gpiochip_add(c);
+	}
+	pxa_gpio_chips = chips;
+	return 0;
+}
+
+static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+	struct pxa_gpio_chip *c;
+	int gpio = irq_to_gpio(irq);
+	unsigned long gpdr, mask = GPIO_bit(gpio);
+
+	c = gpio_to_chip(gpio);
+
+	if (type == IRQ_TYPE_PROBE) {
+		/* Don't mess with enabled GPIOs using preconfigured edges or
+		 * GPIOs set to alternate function or to output during probe
+		 */
+		if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+			return 0;
+
+		if (__gpio_is_occupied(gpio))
+			return 0;
+
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
+	if (__gpio_is_inverted(gpio))
+		__raw_writel(gpdr | mask,  c->regbase + GPDR_OFFSET);
+	else
+		__raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		c->irq_edge_rise |= mask;
+	else
+		c->irq_edge_rise &= ~mask;
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		c->irq_edge_fall |= mask;
+	else
+		c->irq_edge_fall &= ~mask;
+
+	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+
+	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
+		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
+		((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+	return 0;
+}
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pxa_gpio_chip *c;
+	int loop, gpio, gpio_base, n;
+	unsigned long gedr;
+
+	do {
+		loop = 0;
+		for_each_gpio_chip(gpio, c) {
+			gpio_base = c->chip.base;
+
+			gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+			gedr = gedr & c->irq_mask;
+			__raw_writel(gedr, c->regbase + GEDR_OFFSET);
+
+			n = find_first_bit(&gedr, BITS_PER_LONG);
+			while (n < BITS_PER_LONG) {
+				loop = 1;
+
+				generic_handle_irq(gpio_to_irq(gpio_base + n));
+				n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+			}
+		}
+	} while (loop);
+}
+
+static void pxa_ack_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	uint32_t grer, gfer;
+
+	c->irq_mask &= ~GPIO_bit(gpio);
+
+	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+	__raw_writel(grer, c->regbase + GRER_OFFSET);
+	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static void pxa_unmask_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+	c->irq_mask |= GPIO_bit(gpio);
+	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+	.name		= "GPIO",
+	.ack		= pxa_ack_muxed_gpio,
+	.mask		= pxa_mask_muxed_gpio,
+	.unmask		= pxa_unmask_muxed_gpio,
+	.set_type	= pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+{
+	struct pxa_gpio_chip *c;
+	int gpio, irq;
+
+	pxa_last_gpio = end;
+
+	/* Initialize GPIO chips */
+	pxa_init_gpio_chip(end);
+
+	/* clear all GPIO edge detects */
+	for_each_gpio_chip(gpio, c) {
+		__raw_writel(0, c->regbase + GFER_OFFSET);
+		__raw_writel(0, c->regbase + GRER_OFFSET);
+		__raw_writel(~0,c->regbase + GEDR_OFFSET);
+	}
+
+	for (irq  = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+		set_irq_chip(irq, &pxa_muxed_gpio_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Install handler for GPIO>=2 edge detect interrupts */
+	set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler);
+	pxa_muxed_gpio_chip.set_wake = fn;
+}
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct pxa_gpio_chip *c;
+	int gpio;
+
+	for_each_gpio_chip(gpio, c) {
+		c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+		c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+		c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+		c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+
+		/* Clear GPIO transition detect bits */
+		__raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+	}
+	return 0;
+}
+
+static int pxa_gpio_resume(struct sys_device *dev)
+{
+	struct pxa_gpio_chip *c;
+	int gpio;
+
+	for_each_gpio_chip(gpio, c) {
+		/* restore level with set/clear */
+		__raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+		__raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+		__raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+		__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+		__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+	}
+	return 0;
+}
+#else
+#define pxa_gpio_suspend	NULL
+#define pxa_gpio_resume		NULL
+#endif
+
+struct sysdev_class pxa_gpio_sysclass = {
+	.name		= "gpio",
+	.suspend	= pxa_gpio_suspend,
+	.resume		= pxa_gpio_resume,
+};
+
+static int __init pxa_gpio_init(void)
+{
+	return sysdev_class_register(&pxa_gpio_sysclass);
+}
+
+core_initcall(pxa_gpio_init);
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
new file mode 100644
index 00000000000..a7b91dc0685
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/dma.h
@@ -0,0 +1,85 @@
+#ifndef __PLAT_DMA_H
+#define __PLAT_DMA_H
+
+#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
+
+#define DCSR(n)		DMAC_REG((n) << 2)
+#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
+#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
+#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
+#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
+#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
+#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
+#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
+				 (((n) & 0x3f) << 2))
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int irq, int num_ch);
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* __PLAT_DMA_H */
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
new file mode 100644
index 00000000000..44248cb926a
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/gpio.h
@@ -0,0 +1,62 @@
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
+ * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
+ * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
+ * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
+ *
+ * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
+ * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
+ * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
+ *
+ * NOTE:
+ *   BANK 3 is only available on PXA27x and later processors.
+ *   BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n)	(GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+		return GPLR(gpio) & GPIO_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+		if (value)
+			GPSR(gpio) = GPIO_bit(gpio);
+		else
+			GPCR(gpio) = GPIO_bit(gpio);
+	} else
+		__gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep		__gpio_cansleep
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
new file mode 100644
index 00000000000..64019464c8d
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -0,0 +1,399 @@
+/*
+ * arch/arm/plat-pxa/include/plat/mfp.h
+ *
+ *   Common Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_MFP_H
+#define __ASM_PLAT_MFP_H
+
+#define mfp_to_gpio(m)	((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+	MFP_PIN_DF_nCS0_SM_nCS2,
+	MFP_PIN_DF_nCS1_SM_nCS3,
+	MFP_PIN_SM_nCS0,
+	MFP_PIN_SM_nCS1,
+	MFP_PIN_DF_WEn,
+	MFP_PIN_DF_REn,
+	MFP_PIN_DF_CLE_SM_OEn,
+	MFP_PIN_DF_ALE_SM_WEn,
+	MFP_PIN_DF_RDY0,
+	MFP_PIN_DF_RDY1,
+
+	MFP_PIN_SM_SCLK,
+	MFP_PIN_SM_BE0,
+	MFP_PIN_SM_BE1,
+	MFP_PIN_SM_ADV,
+	MFP_PIN_SM_ADVMUX,
+	MFP_PIN_SM_RDY,
+
+	MFP_PIN_MMC1_DAT7,
+	MFP_PIN_MMC1_DAT6,
+	MFP_PIN_MMC1_DAT5,
+	MFP_PIN_MMC1_DAT4,
+	MFP_PIN_MMC1_DAT3,
+	MFP_PIN_MMC1_DAT2,
+	MFP_PIN_MMC1_DAT1,
+	MFP_PIN_MMC1_DAT0,
+	MFP_PIN_MMC1_CMD,
+	MFP_PIN_MMC1_CLK,
+	MFP_PIN_MMC1_CD,
+	MFP_PIN_MMC1_WP,
+
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 3mA (MFP_DS03X)
+ * 		  low power mode = default
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)		((x) & 0x3ff)
+
+#define MFP_AF0			(0x0 << 10)
+#define MFP_AF1			(0x1 << 10)
+#define MFP_AF2			(0x2 << 10)
+#define MFP_AF3			(0x3 << 10)
+#define MFP_AF4			(0x4 << 10)
+#define MFP_AF5			(0x5 << 10)
+#define MFP_AF6			(0x6 << 10)
+#define MFP_AF7			(0x7 << 10)
+#define MFP_AF_MASK		(0x7 << 10)
+#define MFP_AF(x)		(((x) >> 10) & 0x7)
+
+#define MFP_DS01X		(0x0 << 13)
+#define MFP_DS02X		(0x1 << 13)
+#define MFP_DS03X		(0x2 << 13)
+#define MFP_DS04X		(0x3 << 13)
+#define MFP_DS06X		(0x4 << 13)
+#define MFP_DS08X		(0x5 << 13)
+#define MFP_DS10X		(0x6 << 13)
+#define MFP_DS13X		(0x7 << 13)
+#define MFP_DS_MASK		(0x7 << 13)
+#define MFP_DS(x)		(((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT		(0x0 << 16)
+#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
+#define MFP_LPM_PULL_LOW	(0x3 << 16)
+#define MFP_LPM_PULL_HIGH	(0x4 << 16)
+#define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_INPUT		(0x6 << 16)
+#define MFP_LPM_STATE_MASK	(0x7 << 16)
+#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE	(0x0 << 19)
+#define MFP_LPM_EDGE_RISE	(0x1 << 19)
+#define MFP_LPM_EDGE_FALL	(0x2 << 19)
+#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
+#define MFP_LPM_EDGE_MASK	(0x3 << 19)
+#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE		(0x0 << 21)
+#define MFP_PULL_LOW		(0x1 << 21)
+#define MFP_PULL_HIGH		(0x2 << 21)
+#define MFP_PULL_BOTH		(0x3 << 21)
+#define MFP_PULL_MASK		(0x3 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by mfp_init()
+ *
+ * mfp_init_base() - accepts a virtual base for all MFPR registers and
+ * initialize the MFP table to a default state
+ *
+ * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
+ * represents a range of MFP pins from "start" to "end", with the offset
+ * begining at "offset", to define a single pin, let "end" = -1.
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct mfp_addr_map {
+	unsigned int	start;
+	unsigned int	end;
+	unsigned long	offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+	{ MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+	{ MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
+
+void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_addr(struct mfp_addr_map *map);
+
+/*
+ * mfp_{read, write}()	- for direct read/write access to the MFPR register
+ * mfp_config()		- for configuring a group of MFPR registers
+ * mfp_config_lpm()	- configuring all low power MFPR registers for suspend
+ * mfp_config_run()	- configuring all run time  MFPR registers after resume
+ */
+unsigned long mfp_read(int mfp);
+void mfp_write(int mfp, unsigned long mfpr_val);
+void mfp_config(unsigned long *mfp_cfgs, int num);
+void mfp_config_run(void);
+void mfp_config_lpm(void);
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+
+#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
new file mode 100644
index 00000000000..e716c622a17
--- /dev/null
+++ b/arch/arm/plat-pxa/mfp.c
@@ -0,0 +1,278 @@
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ *   Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <plat/mfp.h>
+
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+	unsigned long	config;		/* -1 for not configured */
+	unsigned long	mfpr_off;	/* MFPRxx Register offset */
+	unsigned long	mfpr_run;	/* Run-Mode Register Value */
+	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+	MFPR_LPM_INPUT,
+	MFPR_LPM_DRIVE_LOW,
+	MFPR_LPM_DRIVE_HIGH,
+	MFPR_LPM_PULL_LOW,
+	MFPR_LPM_PULL_HIGH,
+	MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+	MFPR_PULL_NONE,
+	MFPR_PULL_LOW,
+	MFPR_PULL_HIGH,
+	MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+	MFPR_EDGE_NONE,
+	MFPR_EDGE_RISE,
+	MFPR_EDGE_FALL,
+	MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off)			\
+	__raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val)		\
+	__raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p)	((p)->config != -1)
+
+/*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + 0)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+	if (mfp_configured(p))
+		mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+	if (mfp_configured(p)) {
+		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+		if (mfpr_clr != p->mfpr_run)
+			mfpr_writel(p->mfpr_off, mfpr_clr);
+		if (p->mfpr_lpm != mfpr_clr)
+			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+	}
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (i = 0; i < num; i++, mfp_cfgs++) {
+		unsigned long tmp, c = *mfp_cfgs;
+		struct mfp_pin *p;
+		int pin, af, drv, lpm, edge, pull;
+
+		pin = MFP_PIN(c);
+		BUG_ON(pin >= MFP_PIN_MAX);
+		p = &mfp_table[pin];
+
+		af  = MFP_AF(c);
+		drv = MFP_DS(c);
+		lpm = MFP_LPM_STATE(c);
+		edge = MFP_LPM_EDGE(c);
+		pull = MFP_PULL(c);
+
+		/* run-mode pull settings will conflict with MFPR bits of
+		 * low power mode state,  calculate mfpr_run and mfpr_lpm
+		 * individually if pull != MFP_PULL_NONE
+		 */
+		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+		if (likely(pull == MFP_PULL_NONE)) {
+			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_lpm = p->mfpr_run;
+		} else {
+			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_run = tmp | mfpr_pull[pull];
+		}
+
+		p->config = c; __mfp_config_run(p);
+	}
+
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+	unsigned long val, flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	val = mfpr_readl(mfp_table[mfp].mfpr_off);
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+	return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	mfpr_writel(mfp_table[mfp].mfpr_off, val);
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(unsigned long mfpr_base)
+{
+	int i;
+
+	/* initialize the table with default - unconfigured */
+	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+		mfp_table[i].config = -1;
+
+	mfpr_mmio_base = (void __iomem *)mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+	struct mfp_addr_map *p;
+	unsigned long offset, flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (p = map; p->start != MFP_PIN_INVALID; p++) {
+		offset = p->offset;
+		i = p->start;
+
+		do {
+			mfp_table[i].mfpr_off = offset;
+			mfp_table[i].mfpr_run = 0;
+			mfp_table[i].mfpr_lpm = 0;
+			offset += 4; i++;
+		} while ((i <= p->end) && (p->end != -1));
+	}
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_run(p);
+}
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index 6061de87f22..dc66a477f62 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -90,7 +90,10 @@ static inline void flush(void)
 {
 }
 
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+#define __raw_writel(d, ad)			\
+	do {							\
+		*((volatile unsigned int __force *)(ad)) = (d); \
+	} while (0)
 
 /* CONFIG_S3C_BOOT_WATCHDOG
  *
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 542062f8cbc..1932b7e0da1 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -182,7 +182,7 @@ static unsigned long s3c24xx_read_idcode_v4(void)
  * with the caches enabled. It seems at least the S3C2440 has a problem
  * resetting if there is bus activity interrupted by the reset.
  */
-static void s3c24xx_pm_restart(char mode)
+static void s3c24xx_pm_restart(char mode, const char *cmd)
 {
 	if (mode != 's') {
 		unsigned long flags;
@@ -191,12 +191,12 @@ static void s3c24xx_pm_restart(char mode)
 		__cpuc_flush_kern_all();
 		__cpuc_flush_user_all();
 
-		arch_reset(mode);
+		arch_reset(mode, cmd);
 		local_irq_restore(flags);
 	}
 
 	/* fallback, or unhandled */
-	arm_machine_restart(mode);
+	arm_machine_restart(mode, cmd);
 }
 
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index fd23c0e9e69..945e0d237a1 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sun Nov 30 16:39:36 2008
+# Last update: Mon Mar 23 20:09:01 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1811,7 +1811,7 @@ pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
 gprisc3			MACH_GPRISC3		GPRISC3			1823
-stamp9260		MACH_STAMP9260		STAMP9260		1824
+stamp9g20		MACH_STAMP9G20		STAMP9G20		1824
 smdk6430		MACH_SMDK6430		SMDK6430		1825
 smdkc100		MACH_SMDKC100		SMDKC100		1826
 tavorevb		MACH_TAVOREVB		TAVOREVB		1827
@@ -1993,4 +1993,142 @@ spark			MACH_SPARK		SPARK			2002
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htcvenus		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
+hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
+sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
+dack_sda_01		MACH_DACK_SDA_01	DACK_SDA_01		2010
+armbox			MACH_ARMBOX		ARMBOX			2011
+harris_rvp		MACH_HARRIS_RVP		HARRIS_RVP		2012
+ribaldo			MACH_RIBALDO		RIBALDO			2013
+agora			MACH_AGORA		AGORA			2014
+omap3_mini		MACH_OMAP3_MINI		OMAP3_MINI		2015
+a9sam6432_b		MACH_A9SAM6432_B	A9SAM6432_B		2016
+usg2410			MACH_USG2410		USG2410			2017
+pc72052_i10_revb	MACH_PC72052_I10_REVB	PC72052_I10_REVB	2018
+mx35_exm32		MACH_MX35_EXM32		MX35_EXM32		2019
+topas910		MACH_TOPAS910		TOPAS910		2020
+hyena			MACH_HYENA		HYENA			2021
+pospax			MACH_POSPAX		POSPAX			2022
+hdl_gx			MACH_HDL_GX		HDL_GX			2023
+ctera_4bay		MACH_CTERA_4BAY		CTERA_4BAY		2024
+ctera_plug_c		MACH_CTERA_PLUG_C	CTERA_PLUG_C		2025
+crwea_plug_i		MACH_CRWEA_PLUG_I	CRWEA_PLUG_I		2026
+egauge2			MACH_EGAUGE2		EGAUGE2			2027
+didj			MACH_DIDJ		DIDJ			2028
+m_s3c2443		MACH_MEISTER		MEISTER			2029
+htcblackstone		MACH_HTCBLACKSTONE	HTCBLACKSTONE		2030
+cpuat9g20		MACH_CPUAT9G20		CPUAT9G20		2031
+smdk6440		MACH_SMDK6440		SMDK6440		2032
+omap_35xx_mvp		MACH_OMAP_35XX_MVP	OMAP_35XX_MVP		2033
+ctera_plug_i		MACH_CTERA_PLUG_I	CTERA_PLUG_I		2034
+pvg610_100		MACH_PVG610		PVG610			2035
+hprw6815		MACH_HPRW6815		HPRW6815		2036
+omap3_oswald		MACH_OMAP3_OSWALD	OMAP3_OSWALD		2037
+nas4220b		MACH_NAS4220B		NAS4220B		2038
+htcraphael_cdma		MACH_HTCRAPHAEL_CDMA	HTCRAPHAEL_CDMA		2039
+htcdiamond_cdma		MACH_HTCDIAMOND_CDMA	HTCDIAMOND_CDMA		2040
+scaler			MACH_SCALER		SCALER			2041
+zylonite2		MACH_ZYLONITE2		ZYLONITE2		2042
+aspenite		MACH_ASPENITE		ASPENITE		2043
+teton			MACH_TETON		TETON			2044
+ttc_dkb			MACH_TTC_DKB		TTC_DKB			2045
+bishop2			MACH_BISHOP2		BISHOP2			2046
+ippv5			MACH_IPPV5		IPPV5			2047
+farm926			MACH_FARM926		FARM926			2048
+mmccpu			MACH_MMCCPU		MMCCPU			2049
+sgmsfl			MACH_SGMSFL		SGMSFL			2050
+tt8000			MACH_TT8000		TT8000			2051
+zrn4300lp		MACH_ZRN4300LP		ZRN4300LP		2052
+mptc			MACH_MPTC		MPTC			2053
+h6051			MACH_H6051		H6051			2054
+pvg610_101		MACH_PVG610_101		PVG610_101		2055
+stamp9261_pc_evb	MACH_STAMP9261_PC_EVB	STAMP9261_PC_EVB	2056
+pelco_odysseus		MACH_PELCO_ODYSSEUS	PELCO_ODYSSEUS		2057
+tny_a9260		MACH_TNY_A9260		TNY_A9260		2058
+tny_a9g20		MACH_TNY_A9G20		TNY_A9G20		2059
+aesop_mp2530f		MACH_AESOP_MP2530F	AESOP_MP2530F		2060
+dx900			MACH_DX900		DX900			2061
+cpodc2			MACH_CPODC2		CPODC2			2062
+tilt_8925		MACH_TILT_8925		TILT_8925		2063
+davinci_dm357_evm	MACH_DAVINCI_DM357_EVM	DAVINCI_DM357_EVM	2064
+swordfish		MACH_SWORDFISH		SWORDFISH		2065
+corvus			MACH_CORVUS		CORVUS			2066
+taurus			MACH_TAURUS		TAURUS			2067
+axm			MACH_AXM		AXM			2068
+axc			MACH_AXC		AXC			2069
+baby			MACH_BABY		BABY			2070
+mp200			MACH_MP200		MP200			2071
+pcm043			MACH_PCM043		PCM043			2072
+hanlin_v3c		MACH_HANLIN_V3C		HANLIN_V3C		2073
+kbk9g20			MACH_KBK9G20		KBK9G20			2074
+adsturbog5		MACH_ADSTURBOG5		ADSTURBOG5		2075
+avenger_lite1		MACH_AVENGER_LITE1	AVENGER_LITE1		2076
+suc82x			MACH_SUC		SUC			2077
+at91sam7s256		MACH_AT91SAM7S256	AT91SAM7S256		2078
+mendoza			MACH_MENDOZA		MENDOZA			2079
+kira			MACH_KIRA		KIRA			2080
+mx1hbm			MACH_MX1HBM		MX1HBM			2081
+quatro43xx		MACH_QUATRO43XX		QUATRO43XX		2082
+quatro4230		MACH_QUATRO4230		QUATRO4230		2083
+nsb400			MACH_NSB400		NSB400			2084
+drp255			MACH_DRP255		DRP255			2085
+thoth			MACH_THOTH		THOTH			2086
+firestone		MACH_FIRESTONE		FIRESTONE		2087
+asusp750		MACH_ASUSP750		ASUSP750		2088
+ctera_dl		MACH_CTERA_DL		CTERA_DL		2089
+socr			MACH_SOCR		SOCR			2090
+htcoxygen		MACH_HTCOXYGEN		HTCOXYGEN		2091
+heroc			MACH_HEROC		HEROC			2092
+zeno6800		MACH_ZENO6800		ZENO6800		2093
+sc2mcs			MACH_SC2MCS		SC2MCS			2094
+gene100			MACH_GENE100		GENE100			2095
+as353x			MACH_AS353X		AS353X			2096
+sheevaplug		MACH_SHEEVAPLUG		SHEEVAPLUG		2097
+at91sam9g20		MACH_AT91SAM9G20	AT91SAM9G20		2098
+mv88f6192gtw_fe		MACH_MV88F6192GTW_FE	MV88F6192GTW_FE		2099
+cc9200			MACH_CC9200		CC9200			2100
+sm9200			MACH_SM9200		SM9200			2101
+tp9200			MACH_TP9200		TP9200			2102
+snapperdv		MACH_SNAPPERDV		SNAPPERDV		2103
+avengers_lite		MACH_AVENGERS_LITE	AVENGERS_LITE		2104
+avengers_lite1		MACH_AVENGERS_LITE1	AVENGERS_LITE1		2105
+omap3axon		MACH_OMAP3AXON		OMAP3AXON		2106
+ma8xx			MACH_MA8XX		MA8XX			2107
+mp201ek			MACH_MP201EK		MP201EK			2108
+davinci_tux		MACH_DAVINCI_TUX	DAVINCI_TUX		2109
+mpa1600			MACH_MPA1600		MPA1600			2110
+pelco_troy		MACH_PELCO_TROY		PELCO_TROY		2111
+nsb667			MACH_NSB667		NSB667			2112
+rovers5_4mpix		MACH_ROVERS5_4MPIX	ROVERS5_4MPIX		2113
+twocom			MACH_TWOCOM		TWOCOM			2114
+ubisys_p9_rcu3r2	MACH_UBISYS_P9_RCU3R2	UBISYS_P9_RCU3R2	2115
+hero_espresso		MACH_HERO_ESPRESSO	HERO_ESPRESSO		2116
+afeusb			MACH_AFEUSB		AFEUSB			2117
+t830			MACH_T830		T830			2118
+spd8020_cc		MACH_SPD8020_CC		SPD8020_CC		2119
+om_3d7k			MACH_OM_3D7K		OM_3D7K			2120
+picocom2		MACH_PICOCOM2		PICOCOM2		2121
+uwg4mx27		MACH_UWG4MX27		UWG4MX27		2122
+uwg4mx31		MACH_UWG4MX31		UWG4MX31		2123
+cherry			MACH_CHERRY		CHERRY			2124
+mx51_babbage		MACH_MX51_BABBAGE	MX51_BABBAGE		2125
+s3c2440turkiye		MACH_S3C2440TURKIYE	S3C2440TURKIYE		2126
+tx37			MACH_TX37		TX37			2127
+sbc2800_9g20		MACH_SBC2800_9G20	SBC2800_9G20		2128
+benzglb			MACH_BENZGLB		BENZGLB			2129
+benztd			MACH_BENZTD		BENZTD			2130
+cartesio_plus		MACH_CARTESIO_PLUS	CARTESIO_PLUS		2131
+solrad_g20		MACH_SOLRAD_G20		SOLRAD_G20		2132
+mx27wallace		MACH_MX27WALLACE	MX27WALLACE		2133
+fmzwebmodul		MACH_FMZWEBMODUL	FMZWEBMODUL		2134
+rd78x00_masa		MACH_RD78X00_MASA	RD78X00_MASA		2135
+smallogger		MACH_SMALLOGGER		SMALLOGGER		2136
+ccw9p9215		MACH_CCW9P9215		CCW9P9215		2137
+dm355_leopard		MACH_DM355_LEOPARD	DM355_LEOPARD		2138
+ts219			MACH_TS219		TS219			2139
+tny_a9263		MACH_TNY_A9263		TNY_A9263		2140
+apollo			MACH_APOLLO		APOLLO			2141
+at91cap9stk		MACH_AT91CAP9STK	AT91CAP9STK		2142
+spc300			MACH_SPC300		SPC300			2143
+eko			MACH_EKO		EKO			2144
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 8de86e4fead..c8c98dd44ad 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -377,6 +377,4 @@ struct op {
 	u32 flags;
 };
 
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
 extern void vfp_save_state(void *location, u32 fpexc);
-#endif
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index c92a08bd6a8..a5a4e57763c 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -172,7 +172,6 @@ process_exception:
 					@ retry the faulted instruction
 ENDPROC(vfp_support_entry)
 
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
 ENTRY(vfp_save_state)
 	@ Save the current VFP state
 	@ r0 - save location
@@ -190,7 +189,6 @@ ENTRY(vfp_save_state)
 	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
 	mov	pc, lr
 ENDPROC(vfp_save_state)
-#endif
 
 last_VFP_context_address:
 	.word	last_VFP_context
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 9f476a1be2c..75457b30d81 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -377,6 +377,55 @@ static void vfp_pm_init(void)
 static inline void vfp_pm_init(void) { }
 #endif /* CONFIG_PM */
 
+/*
+ * Synchronise the hardware VFP state of a thread other than current with the
+ * saved one. This function is used by the ptrace mechanism.
+ */
+#ifdef CONFIG_SMP
+void vfp_sync_state(struct thread_info *thread)
+{
+	/*
+	 * On SMP systems, the VFP state is automatically saved at every
+	 * context switch. We mark the thread VFP state as belonging to a
+	 * non-existent CPU so that the saved one will be reloaded when
+	 * needed.
+	 */
+	thread->vfpstate.hard.cpu = NR_CPUS;
+}
+#else
+void vfp_sync_state(struct thread_info *thread)
+{
+	unsigned int cpu = get_cpu();
+	u32 fpexc = fmrx(FPEXC);
+
+	/*
+	 * If VFP is enabled, the previous state was already saved and
+	 * last_VFP_context updated.
+	 */
+	if (fpexc & FPEXC_EN)
+		goto out;
+
+	if (!last_VFP_context[cpu])
+		goto out;
+
+	/*
+	 * Save the last VFP state on this CPU.
+	 */
+	fmxr(FPEXC, fpexc | FPEXC_EN);
+	vfp_save_state(last_VFP_context[cpu], fpexc);
+	fmxr(FPEXC, fpexc);
+
+	/*
+	 * Set the context to NULL to force a reload the next time the thread
+	 * uses the VFP.
+	 */
+	last_VFP_context[cpu] = NULL;
+
+out:
+	put_cpu();
+}
+#endif
+
 #include <linux/smp.h>
 
 /*
@@ -427,6 +476,18 @@ static int __init vfp_init(void)
 		 * in place; report VFP support to userspace.
 		 */
 		elf_hwcap |= HWCAP_VFP;
+#ifdef CONFIG_VFPv3
+		if (VFP_arch >= 3) {
+			elf_hwcap |= HWCAP_VFPv3;
+
+			/*
+			 * Check for VFPv3 D16. CPUs in this configuration
+			 * only have 16 x 64bit registers.
+			 */
+			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
+				elf_hwcap |= HWCAP_VFPv3D16;
+		}
+#endif
 #ifdef CONFIG_NEON
 		/*
 		 * Check for the presence of the Advanced SIMD
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8f1f97d56e1..0c1f86e3e44 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1129,6 +1129,7 @@ endchoice
 
 config PM_WAKEUP_BY_GPIO
 	bool "Allow Wakeup from Standby by GPIO"
+	depends on PM && !BF54x
 
 config PM_WAKEUP_GPIO_NUMBER
 	int "GPIO number"
@@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP
 	default n
 	help
 	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+	  (all processors, except ADSP-BF549). This option sets
+	  the general-purpose wake-up enable (GPWE) control bit to enable
+	  wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+	  On ADSP-BF549 this option enables the the same functionality on the
+	  /MRXON pin also PH7.
+
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 5f981d9ca62..79e7e63ab70 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE
 config HAVE_ARCH_KGDB
 	def_bool y
 
-config KGDB_TESTCASE
-	tristate "KGDB: for test case in expect"
-	default n
-	help
-	  This is a kgdb test case for automated testing.
-
 config DEBUG_VERBOSE
 	bool "Verbose fault messages"
 	default y
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 4fdb9e04759..281f4b60e60 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan  9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -133,10 +133,15 @@ CONFIG_BF518=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
@@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
@@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 # CONFIG_DEBUG_HWERR is not set
@@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 833128b3972..a50050f1770 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 334c94b51c4..0a2a00d6388 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9d733436e30..eb027587a35 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 4fb4108d310..9e62b9f40eb 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
@@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index cb32f5624a1..dd6ad6be1c8 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 0f8697618aa..6bc2fb1b2a7 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
@@ -680,7 +680,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 042c7adfccf..69714fb3e60 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 3a20e281d23..017c6ea071b 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 865ed85a576..d880ef78677 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index efe9741b1f1..f410430b4e3 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
@@ -595,7 +595,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index eae83b5de92..7db93874c98 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_SCSI=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index fa580affc9d..a46529c6ade 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 
 #
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 606ecfdcc96..09c31418cc0 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm
 
+unifdef-y += bfin_sport.h
 unifdef-y += fixed_code.h
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index fe88a2c1921..65a651db5b0 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author:       Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
  *
- * Created:      Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BFIN_SPORT_H__
@@ -42,11 +21,10 @@
 #define NORM_FORMAT	0x0
 #define ALAW_FORMAT	0x2
 #define ULAW_FORMAT	0x3
-struct sport_register;
 
 /* Function driver which use sport must initialize the structure */
 struct sport_config {
-	/*TDM (multichannels), I2S or other mode */
+	/* TDM (multichannels), I2S or other mode */
 	unsigned int mode:3;
 
 	/* if TDM mode is selected, channels must be set */
@@ -72,12 +50,18 @@ struct sport_config {
 	int serial_clk;
 	int fsync_clk;
 
-	unsigned int data_format:2;	/*Normal, u-law or a-law */
+	unsigned int data_format:2;	/* Normal, u-law or a-law */
 
 	int word_len;		/* How length of the word in bits, 3-32 bits */
 	int dma_enabled;
 };
 
+/* Userspace interface */
+#define SPORT_IOC_MAGIC		'P'
+#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
 struct sport_register {
 	unsigned short tcr1;
 	unsigned short reserved0;
@@ -117,9 +101,6 @@ struct sport_register {
 	unsigned long mrcs3;
 };
 
-#define SPORT_IOC_MAGIC		'P'
-#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
-
 struct sport_dev {
 	struct cdev cdev;	/* Char device structure */
 
@@ -149,6 +130,8 @@ struct sport_dev {
 	struct sport_config config;
 };
 
+#endif
+
 #define SPORT_TCR1	0
 #define	SPORT_TCR2	1
 #define	SPORT_TCLKDIV	2
@@ -169,4 +152,4 @@ struct sport_dev {
 #define SPORT_MRCS2	22
 #define SPORT_MRCS3	23
 
-#endif				/*__BFIN_SPORT_H__*/
+#endif
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 76f53d8b9a0..343b56361ec 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.8-00"
+#define IPIPE_ARCH_STRING     "1.9-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    8
+#define IPIPE_MINOR_NUMBER    9
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -83,9 +83,9 @@ struct ipipe_sysinfo {
 				"%2 = CYCLES2\n"		\
 				"CC = %2 == %0\n"		\
 				"if ! CC jump 1b\n"		\
-				: "=r" (((unsigned long *)&t)[1]),	\
-				  "=r" (((unsigned long *)&t)[0]),	\
-				  "=r" (__cy2)				\
+				: "=d,a" (((unsigned long *)&t)[1]),	\
+				  "=d,a" (((unsigned long *)&t)[0]),	\
+				  "=d,a" (__cy2)				\
 				: /*no input*/ : "CC");			\
 	t;								\
 	})
@@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,
 
 #define __ipipe_disable_irq(irq)	(irq_desc[irq].chip->mask(irq))
 
-#define __ipipe_lock_root()					\
-	set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+	return 1;
+}
 
-#define __ipipe_unlock_root()					\
-	clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+	set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+	clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
 
 void __ipipe_enable_pipeline(void);
 
 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
 
-#define __ipipe_sync_pipeline(syncmask)					\
-	do {								\
-		struct ipipe_domain *ipd = ipipe_current_domain;	\
-		if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
-			__ipipe_sync_stage(syncmask);			\
-	} while (0)
+#define __ipipe_sync_pipeline  ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);
 
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
 
 int __ipipe_get_irq_priority(unsigned irq);
 
-int __ipipe_get_irqthread_priority(unsigned irq);
-
 void __ipipe_stall_root_raw(void);
 
 void __ipipe_unstall_root_raw(void);
 
 void __ipipe_serial_debug(const char *fmt, ...);
 
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
 DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
 extern unsigned long __ipipe_core_clock;
@@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 
 #define __ipipe_run_irqtail()  /* Must be a macro */			\
 	do {								\
-		asmlinkage void __ipipe_call_irqtail(void);		\
 		unsigned long __pending;				\
-		CSYNC();					\
+		CSYNC();						\
 		__pending = bfin_read_IPEND();				\
 		if (__pending & 0x8000) {				\
 			__pending &= ~0x8010;				\
 			if (__pending && (__pending & (__pending - 1)) == 0) \
-				__ipipe_call_irqtail();			\
+				__ipipe_call_irqtail(__ipipe_irq_tail_hook); \
 		}							\
 	} while (0)
 
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
 		if (ipd == ipipe_root_domain) {				\
-			/*						\
-			 * Note: the I-pipe implements a threaded interrupt model on \
-			 * this arch for Linux external IRQs. The interrupt handler we \
-			 * call here only wakes up the associated IRQ thread. \
-			 */						\
-			if (ipipe_virtual_irq_p(irq)) {			\
-				/* No irqtail here; virtual interrupts have no effect \
-				   on IPEND so there is no need for processing \
-				   deferral. */				\
-				local_irq_enable_nohead(ipd);		\
+			local_irq_enable_hw();				\
+			if (ipipe_virtual_irq_p(irq))			\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-				local_irq_disable_nohead(ipd);		\
-			} else						\
-				/*					\
-				 * No need to run the irqtail here either; \
-				 * we can't be preempted by hw IRQs, so	\
-				 * non-Linux IRQs cannot stack over the short \
-				 * thread wakeup code. Which in turn means \
-				 * that no irqtail condition could be pending \
-				 * for domains above Linux in the pipeline. \
-				 */					\
+			else						\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 			local_irq_enable_nohead(ipd);			\
@@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void);
 
 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
-#define IS_SYSIRQ(irq)		((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq)		((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR		IRQ_CORETMR
+#define IRQ_PRIOTMR		IRQ_CORETMR
+#else
 #define IRQ_SYSTMR		IRQ_TIMER0
 #define IRQ_PRIOTMR		CONFIG_IRQ_TIMER0
+#endif
 
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq)	CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq)	CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
-				 (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
-				 (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-				 -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
-				 (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
-				 (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-				 -1)
+#ifdef CONFIG_BF561
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TMRS8_DISABLE(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TMRS8_ENABLE(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TMRS8_STATUS(val)
 #define bfin_read_TIMER_STATUS()	bfin_read_TMRS8_STATUS()
 #elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
-				 (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
-				 (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
-				 (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-				 -1)
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TIMER_DISABLE0(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TIMER_ENABLE0(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TIMER_STATUS0(val)
 #define bfin_read_TIMER_STATUS(val)	bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
 #endif
 
 #define __ipipe_root_tick_p(regs)	((regs->ipend & 0x10) != 0)
@@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
 #endif /* !CONFIG_IPIPE */
 
+#define ipipe_update_tick_evtdev(evtdev)	do { } while (0)
+
 #endif	/* !__ASM_BLACKFIN_IPIPE_H */
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index cb1025aeabc..3e8acbd1a3b 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -1,5 +1,5 @@
 /*   -*- linux-c -*-
- *   include/asm-blackfin/_baseipipe.h
+ *   include/asm-blackfin/ipipe_base.h
  *
  *   Copyright (C) 2007 Philippe Gerum.
  *
@@ -27,8 +27,9 @@
 #define IPIPE_NR_XIRQS		NR_IRQS
 #define IPIPE_IRQ_ISHIFT	5	/* 2^5 for 32bits arch. */
 
-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG	1	/* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG	15
+#define IPIPE_SYNCDEFER_MASK	(1L << IPIPE_SYNCDEFER_MASK)
 
  /* Blackfin traps -- i.e. exception vector numbers */
 #define IPIPE_NR_FAULTS		52 /* We leave a gap after VEC_ILL_RES. */
@@ -48,11 +49,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
 static inline void __ipipe_stall_root(void)
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 3d977909ce7..7645e85a5f6 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags);
 #define raw_irqs_disabled_flags(flags)	(!irqs_enabled_from_flags_hw(flags))
 #define local_test_iflag_hw(x)		irqs_enabled_from_flags_hw(x)
 
-#define local_save_flags(x)						\
-	do {								\
-		(x) = __ipipe_test_root() ? \
+#define local_save_flags(x)					 \
+	do {							 \
+		(x) = __ipipe_test_root() ?			 \
 			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)
 
-#define local_irq_save(x)				\
-	do {						\
-		(x) = __ipipe_test_and_stall_root();	\
+#define local_irq_save(x)					 \
+	do {						 	 \
+		(x) = __ipipe_test_and_stall_root() ?		 \
+			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
+	} while (0)
+
+static inline void local_irq_restore(unsigned long x)
+{
+	barrier();
+	__ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable()			\
+	do {					\
+		__ipipe_stall_root();		\
+		barrier();			\
 	} while (0)
 
-#define local_irq_restore(x)	__ipipe_restore_root(x)
-#define local_irq_disable()	__ipipe_stall_root()
-#define local_irq_enable()	__ipipe_unstall_root()
+static inline void local_irq_enable(void)
+{
+	barrier();
+	__ipipe_unstall_root();
+}
+
 #define irqs_disabled()		__ipipe_test_root()
 
 #define local_save_flags_hw(x) \
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index e721ce55956..2920087516f 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE              4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_FREEZE              6       /* is freezing for suspend */
+#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 4a92a86824b..fd4d4328a0f 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -15,13 +15,15 @@ else
     obj-y += time.o
 endif
 
-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE)          += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 0e28f759573..d6c067782e6 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 
 	i_d = i_i = 0;
 
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 	/* Set up the zero page.  */
 	d_tbl[i_d].addr = 0;
 	d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+	i_tbl[i_i].addr = 0;
+	i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 339be5a3ae6..a5de8d45424 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -35,14 +35,8 @@
 #include <asm/atomic.h>
 #include <asm/io.h>
 
-static int create_irq_threads;
-
 DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
 asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 
 static void __ipipe_no_irqtail(void);
@@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void)
  */
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
 	struct ipipe_domain *this_domain, *next_domain;
 	struct list_head *head, *pos;
 	int m_ack, s = -1;
@@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 * interrupt.
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
 	this_domain = ipipe_current_domain;
 
 	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
@@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 		next_domain = list_entry(head, struct ipipe_domain, p_link);
 		if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
 			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
-				next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
-			if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-				s = __test_and_set_bit(IPIPE_STALL_FLAG,
-						       &ipipe_root_cpudom_var(status));
+				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+			if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+				s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 			__ipipe_dispatch_wired(next_domain, irq);
-				goto finalize;
-			return;
+			goto out;
 		}
 	}
 
 	/* Ack the interrupt. */
 
 	pos = head;
-
 	while (pos != &__ipipe_pipeline) {
 		next_domain = list_entry(pos, struct ipipe_domain, p_link);
-		/*
-		 * For each domain handling the incoming IRQ, mark it
-		 * as pending in its log.
-		 */
 		if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
-			/*
-			 * Domains that handle this IRQ are polled for
-			 * acknowledging it by decreasing priority
-			 * order. The interrupt must be made pending
-			 * _first_ in the domain's status flags before
-			 * the PIC is unlocked.
-			 */
 			__ipipe_set_irq_pending(next_domain, irq);
-
 			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
-				next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
 				m_ack = 1;
 			}
 		}
-
-		/*
-		 * If the domain does not want the IRQ to be passed
-		 * down the interrupt pipe, exit the loop now.
-		 */
 		if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
 			break;
-
 		pos = next_domain->p_link.next;
 	}
 
@@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 * immediately to the current domain if the interrupt has been
 	 * marked as 'sticky'. This search does not go beyond the
 	 * current domain in the pipeline. We also enforce the
-	 * additional root stage lock (blackfin-specific). */
+	 * additional root stage lock (blackfin-specific).
+	 */
+	if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+		s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 
-	if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-		s = __test_and_set_bit(IPIPE_STALL_FLAG,
-				       &ipipe_root_cpudom_var(status));
-finalize:
+	/*
+	 * If the interrupt preempted the head domain, then do not
+	 * even try to walk the pipeline, unless an interrupt is
+	 * pending for it.
+	 */
+	if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+	    ipipe_head_cpudom_var(irqpend_himask) == 0)
+		goto out;
 
 	__ipipe_walk_pipeline(head);
-
+out:
 	if (!s)
-		__clear_bit(IPIPE_STALL_FLAG,
-			    &ipipe_root_cpudom_var(status));
+		__clear_bit(IPIPE_STALL_FLAG, &p->status);
 }
 
 int __ipipe_check_root(void)
@@ -187,7 +166,7 @@ int __ipipe_check_root(void)
 
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int prio = desc->ic_prio;
 
 	desc->depth = 0;
@@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);
 
 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int prio = desc->ic_prio;
 
 	if (ipd != &ipipe_root &&
@@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 {
 	unsigned long flags;
 
-	/* We need to run the IRQ tail hook whenever we don't
+	/*
+	 * We need to run the IRQ tail hook whenever we don't
 	 * propagate a syscall to higher domains, because we know that
 	 * important operations might be pending there (e.g. Xenomai
-	 * deferred rescheduling). */
+	 * deferred rescheduling).
+	 */
 
-	if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+	if (regs->orig_p0 < NR_syscalls) {
 		void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
 		hook();
-		return 0;
+		if ((current->flags & PF_EVNOTIFY) == 0)
+			return 0;
 	}
 
 	/*
@@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq)
 {
 	unsigned long flags;
 
+#ifdef CONFIG_IPIPE_DEBUG
 	if (irq >= IPIPE_NR_IRQS ||
 	    (ipipe_virtual_irq_p(irq)
 	     && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
 		return -EINVAL;
+#endif
 
 	local_irq_save_hw(flags);
-
 	__ipipe_handle_irq(irq, NULL);
-
 	local_irq_restore_hw(flags);
 
 	return 1;
 }
 
-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
 {
-	struct irq_desc *desc = __desc;
-	unsigned irq = desc - irq_desc;
-	int thrprio = desc->thr_prio;
-	int thrmask = 1 << thrprio;
-	int cpu = smp_processor_id();
-	cpumask_t cpumask;
-
-	sigfillset(&current->blocked);
-	current->flags |= PF_NOFREEZE;
-	cpumask = cpumask_of_cpu(cpu);
-	set_cpus_allowed(current, cpumask);
-	ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
-
-	while (!kthread_should_stop()) {
-		local_irq_disable();
-		if (!(desc->status & IRQ_SCHEDULED)) {
-			set_current_state(TASK_INTERRUPTIBLE);
-resched:
-			local_irq_enable();
-			schedule();
-			local_irq_disable();
-		}
-		__set_current_state(TASK_RUNNING);
-		/*
-		 * If higher priority interrupt servers are ready to
-		 * run, reschedule immediately. We need this for the
-		 * GPIO demux IRQ handler to unmask the interrupt line
-		 * _last_, after all GPIO IRQs have run.
-		 */
-		if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
-			goto resched;
-		if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
-			per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
-		desc->status &= ~IRQ_SCHEDULED;
-		desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
-		local_irq_enable();
-	}
-	__set_current_state(TASK_RUNNING);
-	return 0;
-}
+	unsigned long flags;
 
-static void kick_irqd(unsigned irq, void *cookie)
-{
-	struct irq_desc *desc = irq_desc + irq;
-	int thrprio = desc->thr_prio;
-	int thrmask = 1 << thrprio;
-	int cpu = smp_processor_id();
-
-	if (!(desc->status & IRQ_SCHEDULED)) {
-		desc->status |= IRQ_SCHEDULED;
-		per_cpu(pending_irqthread_mask, cpu) |= thrmask;
-		++per_cpu(pending_irq_count[thrprio], cpu);
-		wake_up_process(desc->thread);
-	}
-}
+	BUG_ON(irqs_disabled());
 
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
-	if (desc->thread || !create_irq_threads)
-		return 0;
-
-	desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
-	if (desc->thread == NULL) {
-		printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
-		return -ENOMEM;
-	}
+	local_irq_save_hw(flags);
 
-	wake_up_process(desc->thread);
+	clear_thread_flag(TIF_IRQ_SYNC);
 
-	desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
-	ipipe_root_domain->irqs[irq].handler = &kick_irqd;
+	if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+		__ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
 
-	return 0;
+	local_irq_restore_hw(flags);
 }
 
-void __init ipipe_init_irq_threads(void)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	unsigned irq;
-	struct irq_desc *desc;
-
-	create_irq_threads = 1;
+	struct ipipe_domain *ipd = ipipe_current_domain;
 
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		desc = irq_desc + irq;
-		if (desc->action != NULL ||
-			(desc->status & IRQ_NOREQUEST) != 0)
-			ipipe_start_irq_thread(irq, desc);
+	if (ipd == ipipe_root_domain) {
+		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+			return;
 	}
+
+	__ipipe_sync_stage(syncmask);
 }
 
 EXPORT_SYMBOL(show_stack);
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 75724eee649..7fd12656484 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -144,11 +144,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 #endif
 	generic_handle_irq(irq);
 
-#ifndef CONFIG_IPIPE	/* Useless and bugous over the I-pipe: IRQs are threaded. */
-	/* If we're the only interrupt running (ignoring IRQ15 which is for
-	   syscalls), lower our priority to IRQ14 so that softirqs run at
-	   that level.  If there's another, lower-level interrupt, irq_exit
-	   will defer softirqs to that.  */
+#ifndef CONFIG_IPIPE
+	/*
+	 * If we're the only interrupt running (ignoring IRQ15 which
+	 * is for syscalls), lower our priority to IRQ14 so that
+	 * softirqs run at that level.  If there's another,
+	 * lower-level interrupt, irq_exit will defer softirqs to
+	 * that. If the interrupt pipeline is enabled, we are already
+	 * running at IRQ14 priority, so we don't need this code.
+	 */
 	CSYNC();
 	pending = bfin_read_IPEND() & ~0x8000;
 	other_ints = pending & (pending - 1);
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index 3dba9c17304..dbcf3e45cb0 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -20,6 +20,7 @@
 static char cmdline[256];
 static unsigned long len;
 
+#ifndef CONFIG_SMP
 static int num1 __attribute__((l1_data));
 
 void kgdb_l1_test(void) __attribute__((l1_text));
@@ -32,6 +33,8 @@ void kgdb_l1_test(void)
 	printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
 	return ;
 }
+#endif
+
 #if L2_LENGTH
 
 static int num2 __attribute__((l2));
@@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z)
 static int test_proc_output(char *buf)
 {
 	kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
 	kgdb_l1_test();
-	#if L2_LENGTH
+#endif
+#if L2_LENGTH
 	kgdb_l2_test();
-	#endif
+#endif
 
 	return 0;
 }
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 594e325b40e..d76618db50d 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -45,6 +45,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/dma.h>
 #include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
 #include <asm/mem_map.h>
 
 #define TEXT_OFFSET 0
@@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 			} else if (addr >= FIXED_CODE_START
 			    && addr + sizeof(tmp) <= FIXED_CODE_END) {
-				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+				copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
 
 			} else
@@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 			} else if (addr >= FIXED_CODE_START
 			    && addr + sizeof(data) <= FIXED_CODE_END) {
-				memcpy((void *)(addr), &data, sizeof(data));
+				copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
 
 			} else
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index e5c11623080..a58687bdee6 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p)
 			       CPU, bfin_revid());
 	}
 
+	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+		panic("You can't run on this processor due to 05000448\n");
+
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1141,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		icache_size = 0;
 
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
-		"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+		"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
 		icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
-		"wb"
+		"-wb"
 #elif defined CONFIG_BFIN_WT
-		"wt"
+		"-wt"
 #endif
 		"", 0);
 
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 172b4c58846..1bbacfbd4c5 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
 
 	write_seqlock(&xtime_lock);
 #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+	/*
+	 * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+	 * enabled.
+	 */
 	if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
 #endif
 		do_timer(1);
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 0e175342112..41f2eacfef2 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
 	.dev.platform_data = &bfin_mii_bus,
 };
-#endif
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 static struct dsa_platform_data ksz8893m_switch_data = {
@@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = {
 	.dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
+#endif
 
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
 	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 /* SPI SWITCH CHIP */
@@ -179,10 +180,11 @@ static struct bfin5xx_spi_chip spi_switch_info = {
 	.bits_per_word = 8,
 };
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
 	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	{
@@ -271,24 +274,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
@@ -630,11 +624,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 	&bfin_mii_bus,
 	&bfin_mac_device,
-#endif
-
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	&ksz8893m_switch_device,
 #endif
+#endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index e5b4bef0eda..c847bb10107 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf518/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - ????
+ *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -19,6 +19,8 @@
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
@@ -53,6 +55,12 @@
 #define ANOMALY_05000443 (1)
 /* Incorrect L1 Instruction Bank B Memory Map Location */
 #define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -65,15 +73,20 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index b50a63b975a..e21c1c3e4ec 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	 CH_UART0_TX,
 	 CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART0_CTS_PIN,
 	 CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	 CH_UART1_TX,
 	 CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART1_CTS_PIN,
 	 CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 856c097b531..48e69eecdba 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 83606fcdde2..7fe480e4ebe 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 035e8d83505..df6808d8a6e 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -167,12 +167,16 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 75722d6008b..e8c41fd842b 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	 CH_UART0_TX,
 	 CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART0_CTS_PIN,
 	 CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	 CH_UART1_TX,
 	 CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART1_CTS_PIN,
 	 CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 308c98dc5ab..8d8b3e7321e 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -38,9 +38,4 @@ config BFIN532_IP0X
 	help
 	  Core support for IP04/IP04 open hardware IP-PBX.
 
-config GENERIC_BF533_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 9afbe72b484..ff1e832f80d 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 015c18f85e7..0765872a8ad 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e7061c7e8c4..e8974878d8c 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
deleted file mode 100644
index 986eeec53b1..00000000000
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf533/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PROG_INTB,
-		.end = IRQ_PROG_INTB,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index e30b1b7d144..f19b63378b1 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /*
  * CPOL (Clock Polarity)
  *  0 - Active high SCK
@@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 2,
 		.bus_num = 1,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 	},
 #endif
 };
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 0d3a03429fb..1cf893e2e55 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -160,7 +160,7 @@
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@@ -278,9 +278,12 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index f3d9e495230..5f517f53b0f 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART_TX,
 	CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 42a57b0acb2..77c59da87e8 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR
 	help
 	  Board supply package for CSP Minotaur
 
-config GENERIC_BF537_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 7168cc14afd..68b98a7af6a 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf537/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 9cd8fb2a30d..41c75b9bfac 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
deleted file mode 100644
index da710fdc456..00000000000
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-	[0] = {
-		.start  = 0x203C0000,
-		.end    = 0x203C0000 + 0x000fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_PF7,
-		.end    = IRQ_PF7,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-	.is_isp1761 = 0,
-	.port1_disable = 0,
-	.bus_width_16 = 1,
-	.port1_otg = 0,
-	.analog_oc = 0,
-	.dack_polarity_high = 0,
-	.dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
-	.id             = 0,
-	.dev = {
-		.platform_data = &isp1760_priv,
-	},
-	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-	.resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
-	{
-		.start = 0x20310000, /* IO PORT */
-		.end = 0x20312000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20311000, /* Attribute Memory */
-		.end = 0x20311FFF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF4,
-		.end = IRQ_PF4,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	}, {
-		.start = 6, /* Card Detect PF6 */
-		.end = 6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-	.name = "bfin_cf_pcmcia",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-	.resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x203FB800 + 4,
-		.end	= 0x203FB800 + 5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_PF9,
-		.end	= IRQ_PF9,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-	},
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-	{
-		.start = 0x20360000,
-		.end = 0x20360000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20360004,
-		.end = 0x20360004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-	.sel15Kres = 1,
-	.clknotstop = 0,
-	.oc_enable = 0,
-	.int_act_high = 0,
-	.int_edge_triggered = 0,
-	.remote_wakeup_connected = 0,
-	.no_power_switching = 1,
-	.power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-	.name = "isp1362-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &isp1362_priv,
-	},
-	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-	.resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20300000,
-		.end = 0x20300000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00020000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = 0xe0000,
-		.offset = 0x20000
-	}, {
-		.name = "file system(spi)",
-		.size = 0x700000,
-		.offset = 0x00100000,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
-	.enable_dma = 1,         /* use dma transfer with this chip*/
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
-	{
-		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
-		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. */
-		.platform_data = NULL, /* No spi_driver specific config */
-		.controller_data = &spi_adc_chip_info,
-	},
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-	{
-		.modalias = "ad1836-spi",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-		.controller_data = &ad1836_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-	{
-		.modalias		= "ad7877",
-		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF6,
-		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select  = 1,
-		.controller_data = &spi_ad7877_chip_info,
-	},
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-	.name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device bfin_uart_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-	&bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-	&isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-	&dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-	&net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-	&bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	&bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-	&bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-	&i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-	&bfin_sport0_uart_device,
-	&bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
-	return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
-	random_ether_addr(addr);
-	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index db7d3a385e4..3c159819e55 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 590eb3a139b..4e1de1e53f8 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 3f4f203a06e..53ad10f3cd7 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 9cb39121d1c..1bfd80c26c9 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -110,7 +110,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
@@ -168,9 +168,12 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b3f87e1d16a..9e34700844a 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART1_CTS_PIN,
 	CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index e130b4f8a05..3a569982736 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf538/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -120,13 +120,17 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index 40503b6b89a..3c2811ebecd 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART1_CTS_PIN,
 	CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 23d03c52f4b..882e40ccf0d 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -91,8 +91,6 @@
 #define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
 /* USB DP/DM Data Pins May Lose State When Entering Hibernate */
 #define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
 #define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
 /* 16-Bit NAND FLASH Boot Mode Is Not Functional */
@@ -157,8 +155,22 @@
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -171,6 +183,8 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index e4cf35e7ab9..c05e79cba25 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -63,7 +63,7 @@
 #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
 
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
 # ifndef CONFIG_UART0_CTS_PIN
@@ -74,12 +74,12 @@
 #  define CONFIG_UART0_RTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
+# ifndef CONFIG_UART2_CTS_PIN
+#  define CONFIG_UART2_CTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
+# ifndef CONFIG_UART2_RTS_PIN
+#  define CONFIG_UART2_RTS_PIN -1
 # endif
 #endif
 
@@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -144,6 +144,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	0,
+	0,
+#endif
 	},
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
@@ -154,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART2_TX,
 	CH_UART2_RX,
 #endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART2_CTS_PIN,
 	CONFIG_UART2_RTS_PIN,
 #endif
@@ -168,6 +172,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART3_TX,
 	CH_UART3_RX,
 #endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	0,
+	0,
+#endif
 	},
 #endif
 };
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index 60299a71e09..f194625f682 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -123,8 +123,8 @@ Events         (highest priority)  EMU         0
 #define IRQ_MXVR_ERROR		BFIN_IRQ(51)	/* MXVR Status (Error) Interrupt */
 #define IRQ_MXVR_MSG		BFIN_IRQ(52)	/* MXVR Message Interrupt */
 #define IRQ_MXVR_PKT		BFIN_IRQ(53)	/* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
+#define IRQ_EPPI1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
 #define IRQ_UART3_ERROR		BFIN_IRQ(56)	/* UART3 Status (Error) Interrupt */
 #define IRQ_HOST_ERROR		BFIN_IRQ(57)	/* HOST Status (Error) Interrupt */
 #define IRQ_PIXC_ERROR		BFIN_IRQ(59)	/* PIXC Status (Error) Interrupt */
@@ -361,8 +361,8 @@ Events         (highest priority)  EMU         0
 #define IRQ_UART2_ERR 		IRQ_UART2_ERROR
 #define IRQ_CAN0_ERR  		IRQ_CAN0_ERROR
 #define IRQ_MXVR_ERR  		IRQ_MXVR_ERROR
-#define IRQ_EPP1_ERR  		IRQ_EPP1_ERROR
-#define IRQ_EPP2_ERR  		IRQ_EPP2_ERROR
+#define IRQ_EPPI1_ERR  		IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR  		IRQ_EPPI2_ERROR
 #define IRQ_UART3_ERR 		IRQ_UART3_ERROR
 #define IRQ_HOST_ERR  		IRQ_HOST_ERROR
 #define IRQ_PIXC_ERR  		IRQ_PIXC_ERROR
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
index e41a67b1fb5..e4bc6d7c5a6 100644
--- a/arch/blackfin/mach-bf561/boards/Kconfig
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -19,9 +19,4 @@ config BFIN561_BLUETECHNIX_CM
 	help
 	  CM-BF561 support for EVAL- and DEV-Board.
 
-config GENERIC_BF561_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 04add010b56..3a152559e95 100644
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf561/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF561_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
 obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6880d1ebfe6..f623c6b0719 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
deleted file mode 100644
index 0ba366a0e69..00000000000
--- a/arch/blackfin/mach-bf561/boards/generic_board.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf561/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.start = 0x2C010300,
-		.end = 0x2C010300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PROG_INTB,
-		.end = IRQ_PROG_INTB,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}, {
-		.start = IRQ_PF9,
-		.end = IRQ_PF9,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	return platform_add_devices(generic_board_devices,
-				    ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 1a9e1756282..d0b0b350644 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -224,7 +224,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
@@ -283,8 +283,11 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 043bfcf26c5..ca8c5f64520 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART_TX,
 	CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 98133b968f7..80d39b2f9db 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -62,3 +62,12 @@
 #if (CONFIG_BOOT_LOAD & 0x3)
 # error "The kernel load address must be 4 byte aligned"
 #endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 3c98dacbf28..aa0648c6a9f 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -66,11 +66,33 @@
 
 /* Invalidate all instruction cache lines assocoiated with this memory area */
 ENTRY(_blackfin_icache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+	P0 = R0;
+	IFLUSH[P0];
 	do_flush IFLUSH, , nop
 ENDPROC(_blackfin_icache_flush_range)
 
 /* Flush all cache lines assocoiated with this area of memory. */
 ENTRY(_blackfin_icache_dcache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+	P0 = R0;
+	IFLUSH[P0];
 	do_flush FLUSH, IFLUSH
 ENDPROC(_blackfin_icache_dcache_flush_range)
 
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 9dddb6f8cc8..35393651359 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -17,7 +17,7 @@
 #define SDGCTL_WIDTH (1 << 31)	/* SDRAM external data path width */
 #define PLL_CTL_VAL \
 	(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
-	 (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+	 (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
 
 __attribute__((l1_text))
 static void do_sync(void)
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 4da50bcd930..8009a512fb1 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -376,10 +376,22 @@ ENTRY(_do_hibernate)
 #endif
 
 #ifdef PINT0_ASSIGN
+	PM_SYS_PUSH(PINT0_MASK_SET)
+	PM_SYS_PUSH(PINT1_MASK_SET)
+	PM_SYS_PUSH(PINT2_MASK_SET)
+	PM_SYS_PUSH(PINT3_MASK_SET)
 	PM_SYS_PUSH(PINT0_ASSIGN)
 	PM_SYS_PUSH(PINT1_ASSIGN)
 	PM_SYS_PUSH(PINT2_ASSIGN)
 	PM_SYS_PUSH(PINT3_ASSIGN)
+	PM_SYS_PUSH(PINT0_INVERT_SET)
+	PM_SYS_PUSH(PINT1_INVERT_SET)
+	PM_SYS_PUSH(PINT2_INVERT_SET)
+	PM_SYS_PUSH(PINT3_INVERT_SET)
+	PM_SYS_PUSH(PINT0_EDGE_SET)
+	PM_SYS_PUSH(PINT1_EDGE_SET)
+	PM_SYS_PUSH(PINT2_EDGE_SET)
+	PM_SYS_PUSH(PINT3_EDGE_SET)
 #endif
 
 	PM_SYS_PUSH(EBIU_AMBCTL0)
@@ -714,10 +726,22 @@ ENTRY(_do_hibernate)
 	PM_SYS_POP(EBIU_AMBCTL0)
 
 #ifdef PINT0_ASSIGN
+	PM_SYS_POP(PINT3_EDGE_SET)
+	PM_SYS_POP(PINT2_EDGE_SET)
+	PM_SYS_POP(PINT1_EDGE_SET)
+	PM_SYS_POP(PINT0_EDGE_SET)
+	PM_SYS_POP(PINT3_INVERT_SET)
+	PM_SYS_POP(PINT2_INVERT_SET)
+	PM_SYS_POP(PINT1_INVERT_SET)
+	PM_SYS_POP(PINT0_INVERT_SET)
 	PM_SYS_POP(PINT3_ASSIGN)
 	PM_SYS_POP(PINT2_ASSIGN)
 	PM_SYS_POP(PINT1_ASSIGN)
 	PM_SYS_POP(PINT0_ASSIGN)
+	PM_SYS_POP(PINT3_MASK_SET)
+	PM_SYS_POP(PINT2_MASK_SET)
+	PM_SYS_POP(PINT1_MASK_SET)
+	PM_SYS_POP(PINT0_MASK_SET)
 #endif
 
 #ifdef SICA_IWR1
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 88de053bbe8..21e65a339a2 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -600,6 +600,19 @@ ENTRY(_system_call)
 	p2 = [p2];
 
 	[p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+	r0 = sp;
+	SP += -12;
+	call ___ipipe_syscall_root;
+	SP += 12;
+	cc = r0 == 1;
+	if cc jump .Lsyscall_really_exit;
+	cc = r0 == -1;
+	if cc jump .Lresume_userspace;
+	r3 = [sp + PT_R3];
+	r4 = [sp + PT_R4];
+	p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
 
 	/* Check the System Call */
 	r7 = __NR_syscall;
@@ -654,6 +667,17 @@ ENTRY(_system_call)
 	r7 =  r7 & r4;
 
 .Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+	cc = BITTST(r7, TIF_IRQ_SYNC);
+	if !cc jump .Lsyscall_no_irqsync;
+	[--sp] = reti;
+	r0 = [sp++];
+	SP += -12;
+	call ___ipipe_sync_root;
+	SP += 12;
+	jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
 	cc = BITTST(r7, TIF_NEED_RESCHED);
 	if !cc jump .Lsyscall_sigpending;
 
@@ -685,6 +709,10 @@ ENTRY(_system_call)
 .Lsyscall_really_exit:
 	r5 = [sp + PT_RESERVED];
 	rets = r5;
+#ifdef CONFIG_IPIPE
+	[--sp] = reti;
+	r5 = [sp++];
+#endif /* CONFIG_IPIPE */
 	rts;
 ENDPROC(_system_call)
 
@@ -771,6 +799,15 @@ _new_old_task:
 ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+	[--sp] = rets;
+	SP += -12;
+	call ___ipipe_check_root
+	SP += 12
+	rets = [sp++];
+	cc = r0 == 0;
+	if cc jump 4f;                /* not on behalf of Linux, get out */
+#endif /* CONFIG_IPIPE */
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);
 
@@ -827,6 +864,28 @@ ENTRY(_ret_from_exception)
 	rts;
 ENDPROC(_ret_from_exception)
 
+#ifdef CONFIG_IPIPE
+
+_sync_root_irqs:
+	[--sp] = reti;		/* Reenable interrupts */
+	r0 = [sp++];
+	jump.l ___ipipe_sync_root
+
+_resume_kernel_from_int:
+	r0.l = _sync_root_irqs
+	r0.h = _sync_root_irqs
+	[--sp] = rets;
+	[--sp] = ( r7:4, p5:3 );
+	SP += -12;
+	call ___ipipe_call_irqtail
+	SP += 12;
+	( r7:4, p5:3 ) = [sp++];
+	rets = [sp++];
+	rts
+#else
+#define _resume_kernel_from_int	 2f
+#endif
+
 ENTRY(_return_from_int)
 	/* If someone else already raised IRQ 15, do nothing.  */
 	csync;
@@ -848,7 +907,7 @@ ENTRY(_return_from_int)
 	r1 = r0 - r1;
 	r2 = r0 & r1;
 	cc = r2 == 0;
-	if !cc jump 2f;
+	if !cc jump _resume_kernel_from_int;
 
 	/* Lower the interrupt level to 15.  */
 	p0.l = lo(EVT15);
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 43c4eb9acb6..0069c2dd462 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -235,6 +235,7 @@ ENDPROC(_evt_system_call)
 
 #ifdef CONFIG_IPIPE
 ENTRY(___ipipe_call_irqtail)
+	p0 = r0;
 	r0.l = 1f;
 	r0.h = 1f;
 	reti = r0;
@@ -242,9 +243,6 @@ ENTRY(___ipipe_call_irqtail)
 1:
 	[--sp] = rets;
 	[--sp] = ( r7:4, p5:3 );
-	p0.l = ___ipipe_irq_tail_hook;
-	p0.h = ___ipipe_irq_tail_hook;
-	p0 = [p0];
 	sp += -12;
 	call (p0);
 	sp += 12;
@@ -259,7 +257,7 @@ ENTRY(___ipipe_call_irqtail)
 	p0.h = hi(EVT14);
 	[p0] = r0;
 	csync;
-	r0 = 0x401f;
+	r0 = 0x401f (z);
 	sti r0;
 	raise 14;
 	[--sp] = reti;          /* IRQs on. */
@@ -277,11 +275,7 @@ ENTRY(___ipipe_call_irqtail)
 	p0.h = _bfin_irq_flags;
 	r0 = [p0];
 	sti r0;
-#if 0 /* FIXME: this actually raises scheduling latencies */
-	/* Reenable interrupts */
-	[--sp] = reti;
-	r0 = [sp++];
-#endif
 	rts;
 ENDPROC(___ipipe_call_irqtail)
+
 #endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 202494568c6..a7d7b2dd405 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -161,11 +161,15 @@ static void bfin_core_unmask_irq(unsigned int irq)
 
 static void bfin_internal_mask_irq(unsigned int irq)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_BF53x
+	local_irq_save_hw(flags);
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
 			     ~(1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
+	local_irq_save_hw(flags);
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
@@ -175,15 +179,20 @@ static void bfin_internal_mask_irq(unsigned int irq)
 			     ~(1 << mask_bit));
 #endif
 #endif
+	local_irq_restore_hw(flags);
 }
 
 static void bfin_internal_unmask_irq(unsigned int irq)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_BF53x
+	local_irq_save_hw(flags);
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
 			     (1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
+	local_irq_save_hw(flags);
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
@@ -193,6 +202,7 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 			     (1 << mask_bit));
 #endif
 #endif
+	local_irq_restore_hw(flags);
 }
 
 #ifdef CONFIG_PM
@@ -390,7 +400,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
 static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
 {
 #ifdef CONFIG_IPIPE
-	_set_irq_handler(irq, handle_edge_irq);
+	_set_irq_handler(irq, handle_level_irq);
 #else
 	struct irq_desc *desc = irq_desc + irq;
 	/* May not call generic set_irq_handler() due to spinlock
@@ -1055,13 +1065,18 @@ int __init init_arch_irq(void)
 #endif
 		default:
 #ifdef CONFIG_IPIPE
-	/*
-	 * We want internal interrupt sources to be masked, because
-	 * ISRs may trigger interrupts recursively (e.g. DMA), but
-	 * interrupts are _not_ masked at CPU level. So let's handle
-	 * them as level interrupts.
-	 */
-			set_irq_handler(irq, handle_level_irq);
+			/*
+			 * We want internal interrupt sources to be
+			 * masked, because ISRs may trigger interrupts
+			 * recursively (e.g. DMA), but interrupts are
+			 * _not_ masked at CPU level. So let's handle
+			 * most of them as level interrupts, except
+			 * the timer interrupt which is special.
+			 */
+			if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+				set_irq_handler(irq, handle_simple_irq);
+			else
+				set_irq_handler(irq, handle_level_irq);
 #else /* !CONFIG_IPIPE */
 			set_irq_handler(irq, handle_simple_irq);
 #endif /* !CONFIG_IPIPE */
@@ -1123,9 +1138,8 @@ int __init init_arch_irq(void)
 
 #ifdef CONFIG_IPIPE
 	for (irq = 0; irq < NR_IRQS; irq++) {
-		struct irq_desc *desc = irq_desc + irq;
+		struct irq_desc *desc = irq_to_desc(irq);
 		desc->ic_prio = __ipipe_get_irq_priority(irq);
-		desc->thr_prio = __ipipe_get_irqthread_priority(irq);
 	}
 #endif /* CONFIG_IPIPE */
 
@@ -1208,76 +1222,21 @@ int __ipipe_get_irq_priority(unsigned irq)
 	return IVG15;
 }
 
-int __ipipe_get_irqthread_priority(unsigned irq)
-{
-	int ient, prio;
-	int demux_irq;
-
-	/* The returned priority value is rescaled to [0..IVG13+1]
-	 * with 0 being the lowest effective priority level. */
-
-	if (irq <= IRQ_CORETMR)
-		return IVG13 - irq + 1;
-
-	/* GPIO IRQs are given the priority of the demux
-	 * interrupt. */
-	if (IS_GPIOIRQ(irq)) {
-#if defined(CONFIG_BF54x)
-		u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
-		demux_irq = (bank == 0 ? IRQ_PINT0 :
-				bank == 1 ? IRQ_PINT1 :
-				bank == 2 ? IRQ_PINT2 :
-				IRQ_PINT3);
-#elif defined(CONFIG_BF561)
-		demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
-				irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
-				IRQ_PROG0_INTA);
-#elif defined(CONFIG_BF52x)
-		demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
-				irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
-				IRQ_PORTF_INTA);
-#else
-		demux_irq = irq;
-#endif
-		return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
-	}
-
-	/* The GPIO demux interrupt is given a lower priority
-	 * than the GPIO IRQs, so that its threaded handler
-	 * unmasks the interrupt line after the decoded IRQs
-	 * have been processed. */
-	prio = PRIO_GPIODEMUX(irq);
-	/* demux irq? */
-	if (prio != -1)
-		return IVG13 - prio;
-
-	for (ient = 0; ient < NR_PERI_INTS; ient++) {
-		struct ivgx *ivg = ivg_table + ient;
-		if (ivg->irqno == irq) {
-			for (prio = 0; prio <= IVG13-IVG7; prio++) {
-				if (ivg7_13[prio].ifirst <= ivg &&
-				    ivg7_13[prio].istop > ivg)
-					return IVG7 - prio;
-			}
-		}
-	}
-
-	return 0;
-}
-
 /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
 #ifdef CONFIG_DO_IRQ_L1
 __attribute__((l1_text))
 #endif
 asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+	struct ipipe_domain *this_domain = ipipe_current_domain;
 	struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
 	struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
-	int irq;
+	int irq, s;
 
 	if (likely(vec == EVT_IVTMR_P)) {
 		irq = IRQ_CORETMR;
-		goto handle_irq;
+		goto core_tick;
 	}
 
 	SSYNC();
@@ -1319,24 +1278,39 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 	irq = ivg->irqno;
 
 	if (irq == IRQ_SYSTMR) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#else
 		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
 		/* This is basically what we need from the register frame. */
 		__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
 		__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
-		if (!ipipe_root_domain_p)
-			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
-		else
+		if (this_domain != ipipe_root_domain)
 			__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+		else
+			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
 	}
 
-handle_irq:
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#endif
+	if (this_domain == ipipe_root_domain) {
+		s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+		barrier();
+	}
 
 	ipipe_trace_irq_entry(irq);
 	__ipipe_handle_irq(irq, regs);
-       ipipe_trace_irq_exit(irq);
+	ipipe_trace_irq_exit(irq);
 
-       if (ipipe_root_domain_p)
-		return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+	if (this_domain == ipipe_root_domain) {
+		set_thread_flag(TIF_IRQ_SYNC);
+		if (!s) {
+			__clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+			return !test_bit(IPIPE_STALL_FLAG, &p->status);
+		}
+	}
 
        return 0;
 }
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 77c99284709..93eab614607 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -158,10 +158,14 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 			kfree(msg);
 			break;
 		case BFIN_IPI_CALL_FUNC:
+			spin_unlock(&msg_queue->lock);
 			ipi_call_function(cpu, msg);
+			spin_lock(&msg_queue->lock);
 			break;
 		case BFIN_IPI_CPU_STOP:
+			spin_unlock(&msg_queue->lock);
 			ipi_cpu_stop(cpu);
+			spin_lock(&msg_queue->lock);
 			kfree(msg);
 			break;
 		default:
@@ -457,7 +461,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
 	smp_flush_data.start = start;
 	smp_flush_data.end = end;
 
-	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
 		printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index d0532b72bba..9c3629b9a68 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -104,7 +104,7 @@ void __init paging_init(void)
 	}
 }
 
-asmlinkage void init_pda(void)
+asmlinkage void __init init_pda(void)
 {
 	unsigned int cpu = raw_smp_processor_id();
 
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
index e626e50a938..060df4aa991 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -135,11 +135,10 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr,
 	if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
 		pci_addr = IS_PIC_SOFT(pcibus_info) ?
 				PHYS_TO_DMA(paddr) :
-		    		PHYS_TO_TIODMA(paddr) | dma_attributes;
+				PHYS_TO_TIODMA(paddr);
 	else
-		pci_addr = IS_PIC_SOFT(pcibus_info) ?
-				paddr :
-				paddr | dma_attributes;
+		pci_addr = paddr;
+	pci_addr |= dma_attributes;
 
 	/* Handle Bus mode */
 	if (IS_PCIX(pcibus_info))
diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h
index 40d1112a458..85c41b75aa7 100644
--- a/arch/m68k/include/asm/param.h
+++ b/arch/m68k/include/asm/param.h
@@ -1,5 +1,26 @@
+#ifndef _M68K_PARAM_H
+#define _M68K_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
 #ifdef __uClinux__
-#include "param_no.h"
+#define EXEC_PAGESIZE	4096
 #else
-#include "param_mm.h"
+#define EXEC_PAGESIZE	8192
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
 #endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _M68K_PARAM_H */
diff --git a/arch/m68k/include/asm/param_mm.h b/arch/m68k/include/asm/param_mm.h
deleted file mode 100644
index 536a2788835..00000000000
--- a/arch/m68k/include/asm/param_mm.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68K_PARAM_H
-#define _M68K_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	8192
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _M68K_PARAM_H */
diff --git a/arch/m68k/include/asm/param_no.h b/arch/m68k/include/asm/param_no.h
deleted file mode 100644
index 6044397adb6..00000000000
--- a/arch/m68k/include/asm/param_no.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68KNOMMU_PARAM_H
-#define _M68KNOMMU_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ
-#define	USER_HZ		HZ
-#define	CLOCKS_PER_SEC	(USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ	100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _M68KNOMMU_PARAM_H */
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index e83cd2f6610..8c9194b9854 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -1,5 +1,87 @@
-#ifdef __uClinux__
-#include "ptrace_no.h"
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1	   0
+#define PT_D2	   1
+#define PT_D3	   2
+#define PT_D4	   3
+#define PT_D5	   4
+#define PT_D6	   5
+#define PT_D7	   6
+#define PT_A0	   7
+#define PT_A1	   8
+#define PT_A2	   9
+#define PT_A3	   10
+#define PT_A4	   11
+#define PT_A5	   12
+#define PT_A6	   13
+#define PT_D0	   14
+#define PT_USP	   15
+#define PT_ORIG_D0 16
+#define PT_SR	   17
+#define PT_PC	   18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+#ifdef CONFIG_COLDFIRE
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+  unsigned short sr;
+  unsigned long  pc;
 #else
-#include "ptrace_mm.h"
+  unsigned short sr;
+  unsigned long  pc;
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
 #endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long  d6;
+	unsigned long  d7;
+	unsigned long  a3;
+	unsigned long  a4;
+	unsigned long  a5;
+	unsigned long  a6;
+	unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/ptrace_mm.h b/arch/m68k/include/asm/ptrace_mm.h
deleted file mode 100644
index 57e763d79bf..00000000000
--- a/arch/m68k/include/asm/ptrace_mm.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1	   0
-#define PT_D2	   1
-#define PT_D3	   2
-#define PT_D4	   3
-#define PT_D5	   4
-#define PT_D6	   5
-#define PT_D7	   6
-#define PT_A0	   7
-#define PT_A1	   8
-#define PT_A2	   9
-#define PT_A3	   10
-#define PT_A4	   11
-#define PT_A5	   12
-#define PT_A6	   13
-#define PT_D0	   14
-#define PT_USP	   15
-#define PT_ORIG_D0 16
-#define PT_SR	   17
-#define PT_PC	   18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-  long     d1;
-  long     d2;
-  long     d3;
-  long     d4;
-  long     d5;
-  long     a0;
-  long     a1;
-  long     a2;
-  long     d0;
-  long     orig_d0;
-  long     stkadj;
-  unsigned short sr;
-  unsigned long  pc;
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
-	unsigned long  d6;
-	unsigned long  d7;
-	unsigned long  a3;
-	unsigned long  a4;
-	unsigned long  a5;
-	unsigned long  a6;
-	unsigned long  retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/ptrace_no.h b/arch/m68k/include/asm/ptrace_no.h
deleted file mode 100644
index 8c9194b9854..00000000000
--- a/arch/m68k/include/asm/ptrace_no.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1	   0
-#define PT_D2	   1
-#define PT_D3	   2
-#define PT_D4	   3
-#define PT_D5	   4
-#define PT_D6	   5
-#define PT_D7	   6
-#define PT_A0	   7
-#define PT_A1	   8
-#define PT_A2	   9
-#define PT_A3	   10
-#define PT_A4	   11
-#define PT_A5	   12
-#define PT_A6	   13
-#define PT_D0	   14
-#define PT_USP	   15
-#define PT_ORIG_D0 16
-#define PT_SR	   17
-#define PT_PC	   18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-  long     d1;
-  long     d2;
-  long     d3;
-  long     d4;
-  long     d5;
-  long     a0;
-  long     a1;
-  long     a2;
-  long     d0;
-  long     orig_d0;
-  long     stkadj;
-#ifdef CONFIG_COLDFIRE
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-  unsigned short sr;
-  unsigned long  pc;
-#else
-  unsigned short sr;
-  unsigned long  pc;
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
-	unsigned long  d6;
-	unsigned long  d7;
-	unsigned long  a3;
-	unsigned long  a4;
-	unsigned long  a5;
-	unsigned long  a6;
-	unsigned long  retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
index 842f86f75cc..4dfb3952b37 100644
--- a/arch/m68k/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup.h
@@ -1,5 +1,376 @@
-#ifdef __uClinux__
-#include "setup_no.h"
+/*
+** asm/setup.h -- Definition of the Linux/m68k setup information
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+**   Added bi_atari part of the machine dependent union bi_un; for now it
+**   contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+**   Renamed to setup.h; added some useful macros to allow gcc some
+**   optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+**   Redesign of the boot information structure; moved boot information
+**   structure to bootinfo.h
+*/
+
+#ifndef _M68K_SETUP_H
+#define _M68K_SETUP_H
+
+
+
+    /*
+     *  Linux/m68k Architectures
+     */
+
+#define MACH_AMIGA    1
+#define MACH_ATARI    2
+#define MACH_MAC      3
+#define MACH_APOLLO   4
+#define MACH_SUN3     5
+#define MACH_MVME147  6
+#define MACH_MVME16x  7
+#define MACH_BVME6000 8
+#define MACH_HP300    9
+#define MACH_Q40     10
+#define MACH_SUN3X   11
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+
+#define CL_SIZE COMMAND_LINE_SIZE
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_machtype;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_AMIGA)
+#  define MACH_IS_AMIGA (0)
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
 #else
-#include "setup_mm.h"
+#  define MACH_AMIGA_ONLY
+#  define MACH_IS_AMIGA (1)
+#  define MACH_TYPE (MACH_AMIGA)
 #endif
+
+#if !defined(CONFIG_ATARI)
+#  define MACH_IS_ATARI (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
+#else
+#  define MACH_ATARI_ONLY
+#  define MACH_IS_ATARI (1)
+#  define MACH_TYPE (MACH_ATARI)
+#endif
+
+#if !defined(CONFIG_MAC)
+#  define MACH_IS_MAC (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
+	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)                 \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                        \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_MAC (m68k_machtype == MACH_MAC)
+#else
+#  define MACH_MAC_ONLY
+#  define MACH_IS_MAC (1)
+#  define MACH_TYPE (MACH_MAC)
+#endif
+
+#if defined(CONFIG_SUN3)
+#define MACH_IS_SUN3 (1)
+#define MACH_SUN3_ONLY (1)
+#define MACH_TYPE (MACH_SUN3)
+#else
+#define MACH_IS_SUN3 (0)
+#endif
+
+#if !defined (CONFIG_APOLLO)
+#  define MACH_IS_APOLLO (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)              \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
+#else
+#  define MACH_APOLLO_ONLY
+#  define MACH_IS_APOLLO (1)
+#  define MACH_TYPE (MACH_APOLLO)
+#endif
+
+#if !defined (CONFIG_MVME147)
+#  define MACH_IS_MVME147 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
+#  define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
+#else
+#  define MACH_MVME147_ONLY
+#  define MACH_IS_MVME147 (1)
+#  define MACH_TYPE (MACH_MVME147)
+#endif
+
+#if !defined (CONFIG_MVME16x)
+#  define MACH_IS_MVME16x (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
+#else
+#  define MACH_MVME16x_ONLY
+#  define MACH_IS_MVME16x (1)
+#  define MACH_TYPE (MACH_MVME16x)
+#endif
+
+#if !defined (CONFIG_BVME6000)
+#  define MACH_IS_BVME6000 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
+#else
+#  define MACH_BVME6000_ONLY
+#  define MACH_IS_BVME6000 (1)
+#  define MACH_TYPE (MACH_BVME6000)
+#endif
+
+#if !defined (CONFIG_HP300)
+#  define MACH_IS_HP300 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+	|| defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
+#else
+#  define MACH_HP300_ONLY
+#  define MACH_IS_HP300 (1)
+#  define MACH_TYPE (MACH_HP300)
+#endif
+
+#if !defined (CONFIG_Q40)
+#  define MACH_IS_Q40 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+	|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
+	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
+#else
+#  define MACH_Q40_ONLY
+#  define MACH_IS_Q40 (1)
+#  define MACH_TYPE (MACH_Q40)
+#endif
+
+#if !defined (CONFIG_SUN3X)
+#  define MACH_IS_SUN3X (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+	|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
+	|| defined(CONFIG_Q40) || defined(CONFIG_MVME147)
+#  define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
+#else
+#  define CONFIG_SUN3X_ONLY
+#  define MACH_IS_SUN3X (1)
+#  define MACH_TYPE (MACH_SUN3X)
+#endif
+
+#ifndef MACH_TYPE
+#  define MACH_TYPE (m68k_machtype)
+#endif
+
+#endif /* __KERNEL__ */
+
+
+    /*
+     *  CPU, FPU and MMU types
+     *
+     *  Note: we may rely on the following equalities:
+     *
+     *      CPU_68020 == MMU_68851
+     *      CPU_68030 == MMU_68030
+     *      CPU_68040 == FPU_68040 == MMU_68040
+     *      CPU_68060 == FPU_68060 == MMU_68060
+     */
+
+#define CPUB_68020     0
+#define CPUB_68030     1
+#define CPUB_68040     2
+#define CPUB_68060     3
+
+#define CPU_68020      (1<<CPUB_68020)
+#define CPU_68030      (1<<CPUB_68030)
+#define CPU_68040      (1<<CPUB_68040)
+#define CPU_68060      (1<<CPUB_68060)
+
+#define FPUB_68881     0
+#define FPUB_68882     1
+#define FPUB_68040     2                       /* Internal FPU */
+#define FPUB_68060     3                       /* Internal FPU */
+#define FPUB_SUNFPA    4                       /* Sun-3 FPA */
+
+#define FPU_68881      (1<<FPUB_68881)
+#define FPU_68882      (1<<FPUB_68882)
+#define FPU_68040      (1<<FPUB_68040)
+#define FPU_68060      (1<<FPUB_68060)
+#define FPU_SUNFPA     (1<<FPUB_SUNFPA)
+
+#define MMUB_68851     0
+#define MMUB_68030     1                       /* Internal MMU */
+#define MMUB_68040     2                       /* Internal MMU */
+#define MMUB_68060     3                       /* Internal MMU */
+#define MMUB_APOLLO    4                       /* Custom Apollo */
+#define MMUB_SUN3      5                       /* Custom Sun-3 */
+
+#define MMU_68851      (1<<MMUB_68851)
+#define MMU_68030      (1<<MMUB_68030)
+#define MMU_68040      (1<<MMUB_68040)
+#define MMU_68060      (1<<MMUB_68060)
+#define MMU_SUN3       (1<<MMUB_SUN3)
+#define MMU_APOLLO     (1<<MMUB_APOLLO)
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_cputype;
+extern unsigned long m68k_fputype;
+extern unsigned long m68k_mmutype;
+#ifdef CONFIG_VME
+extern unsigned long vme_brdtype;
+#endif
+
+    /*
+     *  m68k_is040or060 is != 0 for a '040 or higher;
+     *  used numbers are 4 for 68040 and 6 for 68060.
+     */
+
+extern int m68k_is040or060;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_M68020)
+#  define CPU_IS_020 (0)
+#  define MMU_IS_851 (0)
+#  define MMU_IS_SUN3 (0)
+#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#  define CPU_IS_020 (m68k_cputype & CPU_68020)
+#  define MMU_IS_851 (m68k_mmutype & MMU_68851)
+#  define MMU_IS_SUN3 (0)	/* Sun3 not supported with other CPU enabled */
+#else
+#  define CPU_M68020_ONLY
+#  define CPU_IS_020 (1)
+#ifdef MACH_SUN3_ONLY
+#  define MMU_IS_SUN3 (1)
+#  define MMU_IS_851 (0)
+#else
+#  define MMU_IS_SUN3 (0)
+#  define MMU_IS_851 (1)
+#endif
+#endif
+
+#if !defined(CONFIG_M68030)
+#  define CPU_IS_030 (0)
+#  define MMU_IS_030 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#  define CPU_IS_030 (m68k_cputype & CPU_68030)
+#  define MMU_IS_030 (m68k_mmutype & MMU_68030)
+#else
+#  define CPU_M68030_ONLY
+#  define CPU_IS_030 (1)
+#  define MMU_IS_030 (1)
+#endif
+
+#if !defined(CONFIG_M68040)
+#  define CPU_IS_040 (0)
+#  define MMU_IS_040 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
+#  define CPU_IS_040 (m68k_cputype & CPU_68040)
+#  define MMU_IS_040 (m68k_mmutype & MMU_68040)
+#else
+#  define CPU_M68040_ONLY
+#  define CPU_IS_040 (1)
+#  define MMU_IS_040 (1)
+#endif
+
+#if !defined(CONFIG_M68060)
+#  define CPU_IS_060 (0)
+#  define MMU_IS_060 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
+#  define CPU_IS_060 (m68k_cputype & CPU_68060)
+#  define MMU_IS_060 (m68k_mmutype & MMU_68060)
+#else
+#  define CPU_M68060_ONLY
+#  define CPU_IS_060 (1)
+#  define MMU_IS_060 (1)
+#endif
+
+#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
+#  define CPU_IS_020_OR_030 (0)
+#else
+#  define CPU_M68020_OR_M68030
+#  if defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#    define CPU_IS_020_OR_030 (!m68k_is040or060)
+#  else
+#    define CPU_M68020_OR_M68030_ONLY
+#    define CPU_IS_020_OR_030 (1)
+#  endif
+#endif
+
+#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
+#  define CPU_IS_040_OR_060 (0)
+#else
+#  define CPU_M68040_OR_M68060
+#  if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#    define CPU_IS_040_OR_060 (m68k_is040or060)
+#  else
+#    define CPU_M68040_OR_M68060_ONLY
+#    define CPU_IS_040_OR_060 (1)
+#  endif
+#endif
+
+#define CPU_TYPE (m68k_cputype)
+
+#ifdef CONFIG_M68KFPU_EMU
+#  ifdef CONFIG_M68KFPU_EMU_ONLY
+#    define FPU_IS_EMU (1)
+#  else
+#    define FPU_IS_EMU (!m68k_fputype)
+#  endif
+#else
+#  define FPU_IS_EMU (0)
+#endif
+
+
+    /*
+     *  Miscellaneous
+     */
+
+#define NUM_MEMINFO	4
+
+#ifndef __ASSEMBLY__
+struct mem_info {
+	unsigned long addr;		/* physical address of memory chunk */
+	unsigned long size;		/* length of memory chunk (in bytes) */
+};
+
+extern int m68k_num_memory;		/* # of memory blocks found (and used) */
+extern int m68k_realnum_memory;		/* real # of memory blocks found */
+extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/setup_mm.h b/arch/m68k/include/asm/setup_mm.h
deleted file mode 100644
index 4dfb3952b37..00000000000
--- a/arch/m68k/include/asm/setup_mm.h
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
-** asm/setup.h -- Definition of the Linux/m68k setup information
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 09/29/92 by Greg Harp
-**
-** 5/2/94 Roman Hodek:
-**   Added bi_atari part of the machine dependent union bi_un; for now it
-**   contains just a model field to distinguish between TT and Falcon.
-** 26/7/96 Roman Zippel:
-**   Renamed to setup.h; added some useful macros to allow gcc some
-**   optimizations if possible.
-** 5/10/96 Geert Uytterhoeven:
-**   Redesign of the boot information structure; moved boot information
-**   structure to bootinfo.h
-*/
-
-#ifndef _M68K_SETUP_H
-#define _M68K_SETUP_H
-
-
-
-    /*
-     *  Linux/m68k Architectures
-     */
-
-#define MACH_AMIGA    1
-#define MACH_ATARI    2
-#define MACH_MAC      3
-#define MACH_APOLLO   4
-#define MACH_SUN3     5
-#define MACH_MVME147  6
-#define MACH_MVME16x  7
-#define MACH_BVME6000 8
-#define MACH_HP300    9
-#define MACH_Q40     10
-#define MACH_SUN3X   11
-
-#define COMMAND_LINE_SIZE 256
-
-#ifdef __KERNEL__
-
-#define CL_SIZE COMMAND_LINE_SIZE
-
-#ifndef __ASSEMBLY__
-extern unsigned long m68k_machtype;
-#endif /* !__ASSEMBLY__ */
-
-#if !defined(CONFIG_AMIGA)
-#  define MACH_IS_AMIGA (0)
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
-	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
-#else
-#  define MACH_AMIGA_ONLY
-#  define MACH_IS_AMIGA (1)
-#  define MACH_TYPE (MACH_AMIGA)
-#endif
-
-#if !defined(CONFIG_ATARI)
-#  define MACH_IS_ATARI (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
-	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
-#else
-#  define MACH_ATARI_ONLY
-#  define MACH_IS_ATARI (1)
-#  define MACH_TYPE (MACH_ATARI)
-#endif
-
-#if !defined(CONFIG_MAC)
-#  define MACH_IS_MAC (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
-	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)                 \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                        \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_MAC (m68k_machtype == MACH_MAC)
-#else
-#  define MACH_MAC_ONLY
-#  define MACH_IS_MAC (1)
-#  define MACH_TYPE (MACH_MAC)
-#endif
-
-#if defined(CONFIG_SUN3)
-#define MACH_IS_SUN3 (1)
-#define MACH_SUN3_ONLY (1)
-#define MACH_TYPE (MACH_SUN3)
-#else
-#define MACH_IS_SUN3 (0)
-#endif
-
-#if !defined (CONFIG_APOLLO)
-#  define MACH_IS_APOLLO (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)              \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
-#else
-#  define MACH_APOLLO_ONLY
-#  define MACH_IS_APOLLO (1)
-#  define MACH_TYPE (MACH_APOLLO)
-#endif
-
-#if !defined (CONFIG_MVME147)
-#  define MACH_IS_MVME147 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
-#  define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
-#else
-#  define MACH_MVME147_ONLY
-#  define MACH_IS_MVME147 (1)
-#  define MACH_TYPE (MACH_MVME147)
-#endif
-
-#if !defined (CONFIG_MVME16x)
-#  define MACH_IS_MVME16x (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
-#else
-#  define MACH_MVME16x_ONLY
-#  define MACH_IS_MVME16x (1)
-#  define MACH_TYPE (MACH_MVME16x)
-#endif
-
-#if !defined (CONFIG_BVME6000)
-#  define MACH_IS_BVME6000 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
-	|| defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
-#else
-#  define MACH_BVME6000_ONLY
-#  define MACH_IS_BVME6000 (1)
-#  define MACH_TYPE (MACH_BVME6000)
-#endif
-
-#if !defined (CONFIG_HP300)
-#  define MACH_IS_HP300 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
-	|| defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
-#else
-#  define MACH_HP300_ONLY
-#  define MACH_IS_HP300 (1)
-#  define MACH_TYPE (MACH_HP300)
-#endif
-
-#if !defined (CONFIG_Q40)
-#  define MACH_IS_Q40 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
-	|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
-	|| defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-#  define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
-#else
-#  define MACH_Q40_ONLY
-#  define MACH_IS_Q40 (1)
-#  define MACH_TYPE (MACH_Q40)
-#endif
-
-#if !defined (CONFIG_SUN3X)
-#  define MACH_IS_SUN3X (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
-	|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
-	|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
-	|| defined(CONFIG_Q40) || defined(CONFIG_MVME147)
-#  define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
-#else
-#  define CONFIG_SUN3X_ONLY
-#  define MACH_IS_SUN3X (1)
-#  define MACH_TYPE (MACH_SUN3X)
-#endif
-
-#ifndef MACH_TYPE
-#  define MACH_TYPE (m68k_machtype)
-#endif
-
-#endif /* __KERNEL__ */
-
-
-    /*
-     *  CPU, FPU and MMU types
-     *
-     *  Note: we may rely on the following equalities:
-     *
-     *      CPU_68020 == MMU_68851
-     *      CPU_68030 == MMU_68030
-     *      CPU_68040 == FPU_68040 == MMU_68040
-     *      CPU_68060 == FPU_68060 == MMU_68060
-     */
-
-#define CPUB_68020     0
-#define CPUB_68030     1
-#define CPUB_68040     2
-#define CPUB_68060     3
-
-#define CPU_68020      (1<<CPUB_68020)
-#define CPU_68030      (1<<CPUB_68030)
-#define CPU_68040      (1<<CPUB_68040)
-#define CPU_68060      (1<<CPUB_68060)
-
-#define FPUB_68881     0
-#define FPUB_68882     1
-#define FPUB_68040     2                       /* Internal FPU */
-#define FPUB_68060     3                       /* Internal FPU */
-#define FPUB_SUNFPA    4                       /* Sun-3 FPA */
-
-#define FPU_68881      (1<<FPUB_68881)
-#define FPU_68882      (1<<FPUB_68882)
-#define FPU_68040      (1<<FPUB_68040)
-#define FPU_68060      (1<<FPUB_68060)
-#define FPU_SUNFPA     (1<<FPUB_SUNFPA)
-
-#define MMUB_68851     0
-#define MMUB_68030     1                       /* Internal MMU */
-#define MMUB_68040     2                       /* Internal MMU */
-#define MMUB_68060     3                       /* Internal MMU */
-#define MMUB_APOLLO    4                       /* Custom Apollo */
-#define MMUB_SUN3      5                       /* Custom Sun-3 */
-
-#define MMU_68851      (1<<MMUB_68851)
-#define MMU_68030      (1<<MMUB_68030)
-#define MMU_68040      (1<<MMUB_68040)
-#define MMU_68060      (1<<MMUB_68060)
-#define MMU_SUN3       (1<<MMUB_SUN3)
-#define MMU_APOLLO     (1<<MMUB_APOLLO)
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-extern unsigned long m68k_cputype;
-extern unsigned long m68k_fputype;
-extern unsigned long m68k_mmutype;
-#ifdef CONFIG_VME
-extern unsigned long vme_brdtype;
-#endif
-
-    /*
-     *  m68k_is040or060 is != 0 for a '040 or higher;
-     *  used numbers are 4 for 68040 and 6 for 68060.
-     */
-
-extern int m68k_is040or060;
-#endif /* !__ASSEMBLY__ */
-
-#if !defined(CONFIG_M68020)
-#  define CPU_IS_020 (0)
-#  define MMU_IS_851 (0)
-#  define MMU_IS_SUN3 (0)
-#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
-#  define CPU_IS_020 (m68k_cputype & CPU_68020)
-#  define MMU_IS_851 (m68k_mmutype & MMU_68851)
-#  define MMU_IS_SUN3 (0)	/* Sun3 not supported with other CPU enabled */
-#else
-#  define CPU_M68020_ONLY
-#  define CPU_IS_020 (1)
-#ifdef MACH_SUN3_ONLY
-#  define MMU_IS_SUN3 (1)
-#  define MMU_IS_851 (0)
-#else
-#  define MMU_IS_SUN3 (0)
-#  define MMU_IS_851 (1)
-#endif
-#endif
-
-#if !defined(CONFIG_M68030)
-#  define CPU_IS_030 (0)
-#  define MMU_IS_030 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
-#  define CPU_IS_030 (m68k_cputype & CPU_68030)
-#  define MMU_IS_030 (m68k_mmutype & MMU_68030)
-#else
-#  define CPU_M68030_ONLY
-#  define CPU_IS_030 (1)
-#  define MMU_IS_030 (1)
-#endif
-
-#if !defined(CONFIG_M68040)
-#  define CPU_IS_040 (0)
-#  define MMU_IS_040 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
-#  define CPU_IS_040 (m68k_cputype & CPU_68040)
-#  define MMU_IS_040 (m68k_mmutype & MMU_68040)
-#else
-#  define CPU_M68040_ONLY
-#  define CPU_IS_040 (1)
-#  define MMU_IS_040 (1)
-#endif
-
-#if !defined(CONFIG_M68060)
-#  define CPU_IS_060 (0)
-#  define MMU_IS_060 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
-#  define CPU_IS_060 (m68k_cputype & CPU_68060)
-#  define MMU_IS_060 (m68k_mmutype & MMU_68060)
-#else
-#  define CPU_M68060_ONLY
-#  define CPU_IS_060 (1)
-#  define MMU_IS_060 (1)
-#endif
-
-#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
-#  define CPU_IS_020_OR_030 (0)
-#else
-#  define CPU_M68020_OR_M68030
-#  if defined(CONFIG_M68040) || defined(CONFIG_M68060)
-#    define CPU_IS_020_OR_030 (!m68k_is040or060)
-#  else
-#    define CPU_M68020_OR_M68030_ONLY
-#    define CPU_IS_020_OR_030 (1)
-#  endif
-#endif
-
-#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
-#  define CPU_IS_040_OR_060 (0)
-#else
-#  define CPU_M68040_OR_M68060
-#  if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#    define CPU_IS_040_OR_060 (m68k_is040or060)
-#  else
-#    define CPU_M68040_OR_M68060_ONLY
-#    define CPU_IS_040_OR_060 (1)
-#  endif
-#endif
-
-#define CPU_TYPE (m68k_cputype)
-
-#ifdef CONFIG_M68KFPU_EMU
-#  ifdef CONFIG_M68KFPU_EMU_ONLY
-#    define FPU_IS_EMU (1)
-#  else
-#    define FPU_IS_EMU (!m68k_fputype)
-#  endif
-#else
-#  define FPU_IS_EMU (0)
-#endif
-
-
-    /*
-     *  Miscellaneous
-     */
-
-#define NUM_MEMINFO	4
-
-#ifndef __ASSEMBLY__
-struct mem_info {
-	unsigned long addr;		/* physical address of memory chunk */
-	unsigned long size;		/* length of memory chunk (in bytes) */
-};
-
-extern int m68k_num_memory;		/* # of memory blocks found (and used) */
-extern int m68k_realnum_memory;		/* real # of memory blocks found */
-extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/setup_no.h b/arch/m68k/include/asm/setup_no.h
deleted file mode 100644
index 45d286ce939..00000000000
--- a/arch/m68k/include/asm/setup_no.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifdef __KERNEL__
-
-#include <asm/setup_mm.h>
-
-/* We have a bigger command line buffer. */
-#undef COMMAND_LINE_SIZE
-
-#endif  /*  __KERNEL__  */
-
-#define COMMAND_LINE_SIZE	512
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
index bff6d40345a..523db2a51cf 100644
--- a/arch/m68k/include/asm/sigcontext.h
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -1,5 +1,24 @@
+#ifndef _ASM_M68k_SIGCONTEXT_H
+#define _ASM_M68k_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long  sc_mask;		/* old sigmask */
+	unsigned long  sc_usp;		/* old user stack pointer */
+	unsigned long  sc_d0;
+	unsigned long  sc_d1;
+	unsigned long  sc_a0;
+	unsigned long  sc_a1;
 #ifdef __uClinux__
-#include "sigcontext_no.h"
-#else
-#include "sigcontext_mm.h"
+	unsigned long  sc_a5;
+#endif
+	unsigned short sc_sr;
+	unsigned long  sc_pc;
+	unsigned short sc_formatvec;
+#ifndef __uClinux__
+	unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
+	unsigned long  sc_fpcntl[3];
+	unsigned char  sc_fpstate[216];
+#endif
+};
+
 #endif
diff --git a/arch/m68k/include/asm/sigcontext_mm.h b/arch/m68k/include/asm/sigcontext_mm.h
deleted file mode 100644
index 64fbe34cf26..00000000000
--- a/arch/m68k/include/asm/sigcontext_mm.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_M68k_SIGCONTEXT_H
-#define _ASM_M68k_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long  sc_mask;		/* old sigmask */
-	unsigned long  sc_usp;		/* old user stack pointer */
-	unsigned long  sc_d0;
-	unsigned long  sc_d1;
-	unsigned long  sc_a0;
-	unsigned long  sc_a1;
-	unsigned short sc_sr;
-	unsigned long  sc_pc;
-	unsigned short sc_formatvec;
-	unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
-	unsigned long  sc_fpcntl[3];
-	unsigned char  sc_fpstate[216];
-};
-
-#endif
diff --git a/arch/m68k/include/asm/sigcontext_no.h b/arch/m68k/include/asm/sigcontext_no.h
deleted file mode 100644
index 36c293fc133..00000000000
--- a/arch/m68k/include/asm/sigcontext_no.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
-#define _ASM_M68KNOMMU_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long  sc_mask; 	/* old sigmask */
-	unsigned long  sc_usp;		/* old user stack pointer */
-	unsigned long  sc_d0;
-	unsigned long  sc_d1;
-	unsigned long  sc_a0;
-	unsigned long  sc_a1;
-	unsigned long  sc_a5;
-	unsigned short sc_sr;
-	unsigned long  sc_pc;
-	unsigned short sc_formatvec;
-};
-
-#endif
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
index 61219d7affc..ca7dde8fd22 100644
--- a/arch/m68k/include/asm/siginfo.h
+++ b/arch/m68k/include/asm/siginfo.h
@@ -1,5 +1,97 @@
-#ifdef __uClinux__
-#include "siginfo_no.h"
+#ifndef _M68K_SIGINFO_H
+#define _M68K_SIGINFO_H
+
+#ifndef __uClinux__
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+#endif
+
+#include <asm-generic/siginfo.h>
+
+#ifndef __uClinux__
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			__kernel_pid_t _pid;	/* sender's pid */
+			__kernel_uid_t _uid;	/* backwards compatibility */
+			__kernel_uid32_t _uid32; /* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			__kernel_pid_t _pid;	/* sender's pid */
+			__kernel_uid_t _uid;	/* backwards compatibility */
+			sigval_t _sigval;
+			__kernel_uid32_t _uid32; /* sender's uid */
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			__kernel_pid_t _pid;	/* which child */
+			__kernel_uid_t _uid;	/* backwards compatibility */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+			__kernel_uid32_t _uid32; /* sender's uid */
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void *_addr; /* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+#define UID16_SIGINFO_COMPAT_NEEDED
+
+/*
+ * How these fields are to be accessed.
+ */
+#undef si_uid
+#ifdef __KERNEL__
+#define si_uid		_sifields._kill._uid32
+#define si_uid16	_sifields._kill._uid
 #else
-#include "siginfo_mm.h"
+#define si_uid		_sifields._kill._uid
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+#endif /* !__uClinux__ */
+
 #endif
diff --git a/arch/m68k/include/asm/siginfo_mm.h b/arch/m68k/include/asm/siginfo_mm.h
deleted file mode 100644
index 05a8d6d90b5..00000000000
--- a/arch/m68k/include/asm/siginfo_mm.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef _M68K_SIGINFO_H
-#define _M68K_SIGINFO_H
-
-#define HAVE_ARCH_SIGINFO_T
-#define HAVE_ARCH_COPY_SIGINFO
-
-#include <asm-generic/siginfo.h>
-
-typedef struct siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-
-	union {
-		int _pad[SI_PAD_SIZE];
-
-		/* kill() */
-		struct {
-			__kernel_pid_t _pid;	/* sender's pid */
-			__kernel_uid_t _uid;	/* backwards compatibility */
-			__kernel_uid32_t _uid32; /* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
-			sigval_t _sigval;	/* same as below */
-			int _sys_private;       /* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			__kernel_pid_t _pid;	/* sender's pid */
-			__kernel_uid_t _uid;	/* backwards compatibility */
-			sigval_t _sigval;
-			__kernel_uid32_t _uid32; /* sender's uid */
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			__kernel_pid_t _pid;	/* which child */
-			__kernel_uid_t _uid;	/* backwards compatibility */
-			int _status;		/* exit code */
-			clock_t _utime;
-			clock_t _stime;
-			__kernel_uid32_t _uid32; /* sender's uid */
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			void *_addr; /* faulting insn/memory ref. */
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-} siginfo_t;
-
-#define UID16_SIGINFO_COMPAT_NEEDED
-
-/*
- * How these fields are to be accessed.
- */
-#undef si_uid
-#ifdef __KERNEL__
-#define si_uid		_sifields._kill._uid32
-#define si_uid16	_sifields._kill._uid
-#else
-#define si_uid		_sifields._kill._uid
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/string.h>
-
-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-{
-	if (from->si_code < 0)
-		memcpy(to, from, sizeof(*to));
-	else
-		/* _sigchld is currently the largest know union member */
-		memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
-}
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/arch/m68k/include/asm/siginfo_no.h b/arch/m68k/include/asm/siginfo_no.h
deleted file mode 100644
index b18e5f4064a..00000000000
--- a/arch/m68k/include/asm/siginfo_no.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68KNOMMU_SIGINFO_H
-#define _M68KNOMMU_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
index 3c19988bd93..08788fdefde 100644
--- a/arch/m68k/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal.h
@@ -1,5 +1,213 @@
-#ifdef __uClinux__
-#include "signal_no.h"
+#ifndef _M68K_SIGNAL_H
+#define _M68K_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
 #else
-#include "signal_mm.h"
-#endif
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#ifndef __uClinux__
+#define __HAVE_ARCH_SIG_BITOPS
+
+static inline void sigaddset(sigset_t *set, int _sig)
+{
+	asm ("bfset %0{%1,#1}"
+		: "+od" (*set)
+		: "id" ((_sig - 1) ^ 31)
+		: "cc");
+}
+
+static inline void sigdelset(sigset_t *set, int _sig)
+{
+	asm ("bfclr %0{%1,#1}"
+		: "+od" (*set)
+		: "id" ((_sig - 1) ^ 31)
+		: "cc");
+}
+
+static inline int __const_sigismember(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int __gen_sigismember(sigset_t *set, int _sig)
+{
+	int ret;
+	asm ("bfextu %1{%2,#1},%0"
+		: "=d" (ret)
+		: "od" (*set), "id" ((_sig-1) ^ 31)
+		: "cc");
+	return ret;
+}
+
+#define sigismember(set,sig)			\
+	(__builtin_constant_p(sig) ?		\
+	 __const_sigismember(set,sig) :		\
+	 __gen_sigismember(set,sig))
+
+static inline int sigfindinword(unsigned long word)
+{
+	asm ("bfffo %1{#0,#0},%0"
+		: "=d" (word)
+		: "d" (word & -word)
+		: "cc");
+	return word ^ 31;
+}
+
+struct pt_regs;
+extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+
+#else
+
+#undef __HAVE_ARCH_SIG_BITOPS
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __uClinux__ */
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SIGNAL_H */
diff --git a/arch/m68k/include/asm/signal_mm.h b/arch/m68k/include/asm/signal_mm.h
deleted file mode 100644
index 3db8a81942f..00000000000
--- a/arch/m68k/include/asm/signal_mm.h
+++ /dev/null
@@ -1,206 +0,0 @@
-#ifndef _M68K_SIGNAL_H
-#define _M68K_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#define __HAVE_ARCH_SIG_BITOPS
-
-static inline void sigaddset(sigset_t *set, int _sig)
-{
-	asm ("bfset %0{%1,#1}"
-		: "+od" (*set)
-		: "id" ((_sig - 1) ^ 31)
-		: "cc");
-}
-
-static inline void sigdelset(sigset_t *set, int _sig)
-{
-	asm ("bfclr %0{%1,#1}"
-		: "+od" (*set)
-		: "id" ((_sig - 1) ^ 31)
-		: "cc");
-}
-
-static inline int __const_sigismember(sigset_t *set, int _sig)
-{
-	unsigned long sig = _sig - 1;
-	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
-}
-
-static inline int __gen_sigismember(sigset_t *set, int _sig)
-{
-	int ret;
-	asm ("bfextu %1{%2,#1},%0"
-		: "=d" (ret)
-		: "od" (*set), "id" ((_sig-1) ^ 31)
-		: "cc");
-	return ret;
-}
-
-#define sigismember(set,sig)			\
-	(__builtin_constant_p(sig) ?		\
-	 __const_sigismember(set,sig) :		\
-	 __gen_sigismember(set,sig))
-
-static inline int sigfindinword(unsigned long word)
-{
-	asm ("bfffo %1{#0,#0},%0"
-		: "=d" (word)
-		: "d" (word & -word)
-		: "cc");
-	return word ^ 31;
-}
-
-struct pt_regs;
-extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SIGNAL_H */
diff --git a/arch/m68k/include/asm/signal_no.h b/arch/m68k/include/asm/signal_no.h
deleted file mode 100644
index 216c08be54a..00000000000
--- a/arch/m68k/include/asm/signal_no.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef _M68KNOMMU_SIGNAL_H
-#define _M68KNOMMU_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_SIGNAL_H */
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
index 7d7dde1c73e..9e3054ea59e 100644
--- a/arch/m68k/include/asm/swab.h
+++ b/arch/m68k/include/asm/swab.h
@@ -1,5 +1,27 @@
-#ifdef __uClinux__
-#include "swab_no.h"
-#else
-#include "swab_mm.h"
+#ifndef _M68K_SWAB_H
+#define _M68K_SWAB_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#define __SWAB_64_THRU_32__
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+	__asm__("byterev %0" : "=d" (val) : "0" (val));
+	return val;
+}
+
+#define __arch_swab32 __arch_swab32
+#elif !defined(__uClinux__)
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+	__asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
+	return val;
+}
+#define __arch_swab32 __arch_swab32
 #endif
+
+#endif /* _M68K_SWAB_H */
diff --git a/arch/m68k/include/asm/swab_mm.h b/arch/m68k/include/asm/swab_mm.h
deleted file mode 100644
index 7221e306682..00000000000
--- a/arch/m68k/include/asm/swab_mm.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _M68K_SWAB_H
-#define _M68K_SWAB_H
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
-	__asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
-	return val;
-}
-#define __arch_swab32 __arch_swab32
-
-#endif /* _M68K_SWAB_H */
diff --git a/arch/m68k/include/asm/swab_no.h b/arch/m68k/include/asm/swab_no.h
deleted file mode 100644
index e582257db30..00000000000
--- a/arch/m68k/include/asm/swab_no.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _M68KNOMMU_SWAB_H
-#define _M68KNOMMU_SWAB_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __SWAB_64_THRU_32__
-#endif
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
-	asm(
-			"byterev %0"
-			: "=d" (val)
-			: "0" (val)
-	   );
-	return val;
-}
-
-#define __arch_swab32 __arch_swab32
-#endif
-
-#endif /* _M68KNOMMU_SWAB_H */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index df1d9d4cb1f..3c19027331f 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -1,5 +1,372 @@
-#ifdef __uClinux__
-#include "unistd_no.h"
-#else
-#include "unistd_mm.h"
-#endif
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+#define __NR_idle		/* 112 */ Obsolete
+#define __NR_vm86		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_getpagesize	166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_getdents64		220
+#define __NR_gettid		221
+#define __NR_tkill		222
+#define __NR_setxattr		223
+#define __NR_lsetxattr		224
+#define __NR_fsetxattr		225
+#define __NR_getxattr		226
+#define __NR_lgetxattr		227
+#define __NR_fgetxattr		228
+#define __NR_listxattr		229
+#define __NR_llistxattr		230
+#define __NR_flistxattr		231
+#define __NR_removexattr	232
+#define __NR_lremovexattr	233
+#define __NR_fremovexattr	234
+#define __NR_futex		235
+#define __NR_sendfile64		236
+#define __NR_mincore		237
+#define __NR_madvise		238
+#define __NR_fcntl64		239
+#define __NR_readahead		240
+#define __NR_io_setup		241
+#define __NR_io_destroy		242
+#define __NR_io_getevents	243
+#define __NR_io_submit		244
+#define __NR_io_cancel		245
+#define __NR_fadvise64		246
+#define __NR_exit_group		247
+#define __NR_lookup_dcookie	248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_remap_file_pages	252
+#define __NR_set_tid_address	253
+#define __NR_timer_create	254
+#define __NR_timer_settime	255
+#define __NR_timer_gettime	256
+#define __NR_timer_getoverrun	257
+#define __NR_timer_delete	258
+#define __NR_clock_settime	259
+#define __NR_clock_gettime	260
+#define __NR_clock_getres	261
+#define __NR_clock_nanosleep	262
+#define __NR_statfs64		263
+#define __NR_fstatfs64		264
+#define __NR_tgkill		265
+#define __NR_utimes		266
+#define __NR_fadvise64_64	267
+#define __NR_mbind		268
+#define __NR_get_mempolicy	269
+#define __NR_set_mempolicy	270
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_waitid		277
+#define __NR_vserver		278
+#define __NR_add_key		279
+#define __NR_request_key	280
+#define __NR_keyctl		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
+#define __NR_migrate_pages	287
+#define __NR_openat		288
+#define __NR_mkdirat		289
+#define __NR_mknodat		290
+#define __NR_fchownat		291
+#define __NR_futimesat		292
+#define __NR_fstatat64		293
+#define __NR_unlinkat		294
+#define __NR_renameat		295
+#define __NR_linkat		296
+#define __NR_symlinkat		297
+#define __NR_readlinkat		298
+#define __NR_fchmodat		299
+#define __NR_faccessat		300
+#define __NR_pselect6		301
+#define __NR_ppoll		302
+#define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
+#define __NR_move_pages		310
+#define __NR_sched_setaffinity	311
+#define __NR_sched_getaffinity	312
+#define __NR_kexec_load		313
+#define __NR_getcpu		314
+#define __NR_epoll_pwait	315
+#define __NR_utimensat		316
+#define __NR_signalfd		317
+#define __NR_timerfd_create	318
+#define __NR_eventfd		319
+#define __NR_fallocate		320
+#define __NR_timerfd_settime	321
+#define __NR_timerfd_gettime	322
+#define __NR_signalfd4		323
+#define __NR_eventfd2		324
+#define __NR_epoll_create1	325
+#define __NR_dup3		326
+#define __NR_pipe2		327
+#define __NR_inotify_init1	328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls		329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/include/asm/unistd_mm.h b/arch/m68k/include/asm/unistd_mm.h
deleted file mode 100644
index 3c19027331f..00000000000
--- a/arch/m68k/include/asm/unistd_mm.h
+++ /dev/null
@@ -1,372 +0,0 @@
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		/* 110 */ not supported
-#define __NR_vhangup		111
-#define __NR_idle		/* 112 */ Obsolete
-#define __NR_vm86		/* 113 */ not supported
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_getpagesize	166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_chown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_lchown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_getdents64		220
-#define __NR_gettid		221
-#define __NR_tkill		222
-#define __NR_setxattr		223
-#define __NR_lsetxattr		224
-#define __NR_fsetxattr		225
-#define __NR_getxattr		226
-#define __NR_lgetxattr		227
-#define __NR_fgetxattr		228
-#define __NR_listxattr		229
-#define __NR_llistxattr		230
-#define __NR_flistxattr		231
-#define __NR_removexattr	232
-#define __NR_lremovexattr	233
-#define __NR_fremovexattr	234
-#define __NR_futex		235
-#define __NR_sendfile64		236
-#define __NR_mincore		237
-#define __NR_madvise		238
-#define __NR_fcntl64		239
-#define __NR_readahead		240
-#define __NR_io_setup		241
-#define __NR_io_destroy		242
-#define __NR_io_getevents	243
-#define __NR_io_submit		244
-#define __NR_io_cancel		245
-#define __NR_fadvise64		246
-#define __NR_exit_group		247
-#define __NR_lookup_dcookie	248
-#define __NR_epoll_create	249
-#define __NR_epoll_ctl		250
-#define __NR_epoll_wait		251
-#define __NR_remap_file_pages	252
-#define __NR_set_tid_address	253
-#define __NR_timer_create	254
-#define __NR_timer_settime	255
-#define __NR_timer_gettime	256
-#define __NR_timer_getoverrun	257
-#define __NR_timer_delete	258
-#define __NR_clock_settime	259
-#define __NR_clock_gettime	260
-#define __NR_clock_getres	261
-#define __NR_clock_nanosleep	262
-#define __NR_statfs64		263
-#define __NR_fstatfs64		264
-#define __NR_tgkill		265
-#define __NR_utimes		266
-#define __NR_fadvise64_64	267
-#define __NR_mbind		268
-#define __NR_get_mempolicy	269
-#define __NR_set_mempolicy	270
-#define __NR_mq_open		271
-#define __NR_mq_unlink		272
-#define __NR_mq_timedsend	273
-#define __NR_mq_timedreceive	274
-#define __NR_mq_notify		275
-#define __NR_mq_getsetattr	276
-#define __NR_waitid		277
-#define __NR_vserver		278
-#define __NR_add_key		279
-#define __NR_request_key	280
-#define __NR_keyctl		281
-#define __NR_ioprio_set		282
-#define __NR_ioprio_get		283
-#define __NR_inotify_init	284
-#define __NR_inotify_add_watch	285
-#define __NR_inotify_rm_watch	286
-#define __NR_migrate_pages	287
-#define __NR_openat		288
-#define __NR_mkdirat		289
-#define __NR_mknodat		290
-#define __NR_fchownat		291
-#define __NR_futimesat		292
-#define __NR_fstatat64		293
-#define __NR_unlinkat		294
-#define __NR_renameat		295
-#define __NR_linkat		296
-#define __NR_symlinkat		297
-#define __NR_readlinkat		298
-#define __NR_fchmodat		299
-#define __NR_faccessat		300
-#define __NR_pselect6		301
-#define __NR_ppoll		302
-#define __NR_unshare		303
-#define __NR_set_robust_list	304
-#define __NR_get_robust_list	305
-#define __NR_splice		306
-#define __NR_sync_file_range	307
-#define __NR_tee		308
-#define __NR_vmsplice		309
-#define __NR_move_pages		310
-#define __NR_sched_setaffinity	311
-#define __NR_sched_getaffinity	312
-#define __NR_kexec_load		313
-#define __NR_getcpu		314
-#define __NR_epoll_pwait	315
-#define __NR_utimensat		316
-#define __NR_signalfd		317
-#define __NR_timerfd_create	318
-#define __NR_eventfd		319
-#define __NR_fallocate		320
-#define __NR_timerfd_settime	321
-#define __NR_timerfd_gettime	322
-#define __NR_signalfd4		323
-#define __NR_eventfd2		324
-#define __NR_epoll_create1	325
-#define __NR_dup3		326
-#define __NR_pipe2		327
-#define __NR_inotify_init1	328
-
-#ifdef __KERNEL__
-
-#define NR_syscalls		329
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/include/asm/unistd_no.h b/arch/m68k/include/asm/unistd_no.h
deleted file mode 100644
index b034a2f7b44..00000000000
--- a/arch/m68k/include/asm/unistd_no.h
+++ /dev/null
@@ -1,372 +0,0 @@
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		/* 110 */ not supported
-#define __NR_vhangup		111
-#define __NR_idle		/* 112 */ Obsolete
-#define __NR_vm86		/* 113 */ not supported
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_getpagesize	166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_chown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_lchown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_getdents64		220
-#define __NR_gettid		221
-#define __NR_tkill		222
-#define __NR_setxattr		223
-#define __NR_lsetxattr		224
-#define __NR_fsetxattr		225
-#define __NR_getxattr		226
-#define __NR_lgetxattr		227
-#define __NR_fgetxattr		228
-#define __NR_listxattr		229
-#define __NR_llistxattr		230
-#define __NR_flistxattr		231
-#define __NR_removexattr	232
-#define __NR_lremovexattr	233
-#define __NR_fremovexattr	234
-#define __NR_futex		235
-#define __NR_sendfile64		236
-#define __NR_mincore		237
-#define __NR_madvise		238
-#define __NR_fcntl64		239
-#define __NR_readahead		240
-#define __NR_io_setup		241
-#define __NR_io_destroy		242
-#define __NR_io_getevents	243
-#define __NR_io_submit		244
-#define __NR_io_cancel		245
-#define __NR_fadvise64		246
-#define __NR_exit_group		247
-#define __NR_lookup_dcookie	248
-#define __NR_epoll_create	249
-#define __NR_epoll_ctl		250
-#define __NR_epoll_wait		251
-#define __NR_remap_file_pages	252
-#define __NR_set_tid_address	253
-#define __NR_timer_create	254
-#define __NR_timer_settime	255
-#define __NR_timer_gettime	256
-#define __NR_timer_getoverrun	257
-#define __NR_timer_delete	258
-#define __NR_clock_settime	259
-#define __NR_clock_gettime	260
-#define __NR_clock_getres	261
-#define __NR_clock_nanosleep	262
-#define __NR_statfs64		263
-#define __NR_fstatfs64		264
-#define __NR_tgkill		265
-#define __NR_utimes		266
-#define __NR_fadvise64_64	267
-#define __NR_mbind		268
-#define __NR_get_mempolicy	269
-#define __NR_set_mempolicy	270
-#define __NR_mq_open		271
-#define __NR_mq_unlink		272
-#define __NR_mq_timedsend	273
-#define __NR_mq_timedreceive	274
-#define __NR_mq_notify		275
-#define __NR_mq_getsetattr	276
-#define __NR_waitid		277
-#define __NR_vserver		278
-#define __NR_add_key		279
-#define __NR_request_key	280
-#define __NR_keyctl		281
-#define __NR_ioprio_set		282
-#define __NR_ioprio_get		283
-#define __NR_inotify_init	284
-#define __NR_inotify_add_watch	285
-#define __NR_inotify_rm_watch	286
-#define __NR_migrate_pages	287
-#define __NR_openat		288
-#define __NR_mkdirat		289
-#define __NR_mknodat		290
-#define __NR_fchownat		291
-#define __NR_futimesat		292
-#define __NR_fstatat64		293
-#define __NR_unlinkat		294
-#define __NR_renameat		295
-#define __NR_linkat		296
-#define __NR_symlinkat		297
-#define __NR_readlinkat		298
-#define __NR_fchmodat		299
-#define __NR_faccessat		300
-#define __NR_pselect6		301
-#define __NR_ppoll		302
-#define __NR_unshare		303
-#define __NR_set_robust_list	304
-#define __NR_get_robust_list	305
-#define __NR_splice		306
-#define __NR_sync_file_range	307
-#define __NR_tee		308
-#define __NR_vmsplice		309
-#define __NR_move_pages		310
-#define __NR_sched_setaffinity	311
-#define __NR_sched_getaffinity	312
-#define __NR_kexec_load		313
-#define __NR_getcpu		314
-#define __NR_epoll_pwait	315
-#define __NR_utimensat		316
-#define __NR_signalfd		317
-#define __NR_timerfd_create	318
-#define __NR_eventfd		319
-#define __NR_fallocate		320
-#define __NR_timerfd_settime	321
-#define __NR_timerfd_gettime	322
-#define __NR_signalfd4		323
-#define __NR_eventfd2		324
-#define __NR_epoll_create1	325
-#define __NR_dup3		326
-#define __NR_pipe2		327
-#define __NR_inotify_init1	328
-
-#ifdef __KERNEL__
-
-#define NR_syscalls		329
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index d01a5d2b755..db902540bf2 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -17,6 +17,7 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
 
 /***************************************************************************/
 
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index dfdb5c2ed8e..44baeb225dc 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -24,7 +24,6 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 #include <linux/mtd/partitions.h>
@@ -33,233 +32,6 @@
 /***************************************************************************/
 
 void coldfire_reset(void);
-static void coldfire_qspi_cs_control(u8 cs, u8 command);
-
-/***************************************************************************/
-
-#if defined(CONFIG_SPI)
-
-#if defined(CONFIG_WILDFIRE)
-#define SPI_NUM_CHIPSELECTS 	0x02
-#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK		0x18
-
-#define FLASH_BLOCKSIZE		(1024*64)
-#define FLASH_NUMBLOCKS		16
-#define FLASH_TYPE		"m25p80"
-
-#define M25P80_CS		0
-#define MMC_CS			1
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-	/* sflash */
-	[0] = {
-		.name = "stm25p80",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-		.mask_flags = 0
-	}
-};
-
-#endif
-
-#elif defined(CONFIG_WILDFIREMOD)
-
-#define SPI_NUM_CHIPSELECTS	0x08
-#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK		0x78
-
-#define FLASH_BLOCKSIZE		(1024*64)
-#define FLASH_NUMBLOCKS		64
-#define FLASH_TYPE		"m25p32"
-/* Reserve 1M for the kernel parition */
-#define FLASH_KERNEL_SIZE   (1024 * 1024)
-
-#define M25P80_CS		5
-#define MMC_CS			6
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-	/* sflash */
-	[0] = {
-		.name = "kernel",
-		.offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-		.size = FLASH_KERNEL_SIZE,
-		.mask_flags = 0
-	},
-	[1] = {
-		.name = "image",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-		.mask_flags = 0
-	},
-	[2] = {
-		.name = "all",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-		.mask_flags = 0
-	}
-};
-#endif
-
-#else
-#define SPI_NUM_CHIPSELECTS 	0x04
-#define SPI_PAR_VAL		0x7F  /* Enable DIN, DOUT, CLK, CS0 - CS4 */
-#endif
-
-#ifdef MMC_CS
-static struct coldfire_spi_chip flash_chip_info = {
-	.mode = SPI_MODE_0,
-	.bits_per_word = 16,
-	.del_cs_to_clk = 17,
-	.del_after_trans = 1,
-	.void_write_data = 0
-};
-
-static struct coldfire_spi_chip mmc_chip_info = {
-	.mode = SPI_MODE_0,
-	.bits_per_word = 16,
-	.del_cs_to_clk = 17,
-	.del_after_trans = 1,
-	.void_write_data = 0xFFFF
-};
-#endif
-
-#ifdef M25P80_CS
-static struct flash_platform_data stm25p80_platform_data = {
-	.name = "ST M25P80 SPI Flash chip",
-#ifdef CONFIG_MTD_PARTITIONS
-	.parts = stm25p_partitions,
-	.nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
-#endif
-	.type = FLASH_TYPE
-};
-#endif
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#ifdef M25P80_CS
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 16000000,
-		.bus_num = 1,
-		.chip_select = M25P80_CS,
-		.platform_data = &stm25p80_platform_data,
-		.controller_data = &flash_chip_info
-	},
-#endif
-#ifdef MMC_CS
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 16000000,
-		.bus_num = 1,
-		.chip_select = MMC_CS,
-		.controller_data = &mmc_chip_info
-	}
-#endif
-};
-
-static struct coldfire_spi_master coldfire_master_info = {
-	.bus_num = 1,
-	.num_chipselect = SPI_NUM_CHIPSELECTS,
-	.irq_source = MCF5282_QSPI_IRQ_SOURCE,
-	.irq_vector = MCF5282_QSPI_IRQ_VECTOR,
-	.irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
-	.irq_lp = 0x2B,  /* Level 5 and Priority 3 */
-	.par_val = SPI_PAR_VAL,
-	.cs_control = coldfire_qspi_cs_control,
-};
-
-static struct resource coldfire_spi_resources[] = {
-	[0] = {
-		.name = "qspi-par",
-		.start = MCF5282_QSPI_PAR,
-		.end = MCF5282_QSPI_PAR,
-		.flags = IORESOURCE_MEM
-	},
-
-	[1] = {
-		.name = "qspi-module",
-		.start = MCF5282_QSPI_QMR,
-		.end = MCF5282_QSPI_QMR + 0x18,
-		.flags = IORESOURCE_MEM
-	},
-
-	[2] = {
-		.name = "qspi-int-level",
-		.start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-		.end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-		.flags = IORESOURCE_MEM
-	},
-
-	[3] = {
-		.name = "qspi-int-mask",
-		.start = MCF5282_INTC0 + MCFINTC_IMRL,
-		.end = MCF5282_INTC0 + MCFINTC_IMRL,
-		.flags = IORESOURCE_MEM
-	}
-};
-
-static struct platform_device coldfire_spi = {
-	.name = "spi_coldfire",
-	.id = -1,
-	.resource = coldfire_spi_resources,
-	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
-	.dev = {
-		.platform_data = &coldfire_master_info,
-	}
-};
-
-static void coldfire_qspi_cs_control(u8 cs, u8 command)
-{
-	u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
-
-#if defined(CONFIG_WILDFIRE)
-	u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
-#endif
-#if defined(CONFIG_WILDFIREMOD)
-	u8 cs_mask = (cs << 3) & SPI_CS_MASK;
-#endif
-
-	/*
-	 * Don't do anything if the chip select is not
-	 * one of the port qs pins.
-	 */
-	if (command & QSPI_CS_INIT) {
-#if defined(CONFIG_WILDFIRE)
-		MCF5282_GPIO_DDRQS  |= cs_bit;
-		MCF5282_GPIO_PQSPAR &= ~cs_bit;
-#endif
-
-#if defined(CONFIG_WILDFIREMOD)
-		MCF5282_GPIO_DDRQS  |= SPI_CS_MASK;
-		MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
-#endif
-	}
-
-	if (command & QSPI_CS_ASSERT) {
-		MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
-		MCF5282_GPIO_PORTQS |= cs_mask;
-	} else if (command & QSPI_CS_DROP) {
-		MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
-	}
-}
-
-static int __init spi_dev_init(void)
-{
-	int retval;
-
-	retval = platform_device_register(&coldfire_spi);
-	if (retval < 0)
-		return retval;
-
-	if (ARRAY_SIZE(spi_board_info))
-		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	return retval;
-}
-
-#endif /* CONFIG_SPI */
 
 /***************************************************************************/
 
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e61465a18c7..206cb7953b0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -238,8 +238,12 @@ config MIPS_SIM
 	  This option enables support for MIPS Technologies MIPSsim software
 	  emulator.
 
-config MACH_EMMA
-	bool "NEC EMMA series based machines"
+config NEC_MARKEINS
+	bool "NEC EMMA2RH Mark-eins board"
+	select SOC_EMMA2RH
+	select HW_HAS_PCI
+	help
+	  This enables support for the NEC Electronics Mark-eins boards.
 
 config MACH_VR41XX
 	bool "NEC VR4100 series based machines"
@@ -637,7 +641,6 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
-source "arch/mips/emma/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -895,6 +898,18 @@ config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
 
+config SOC_EMMA2RH
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_R5500
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+
 config SOC_PNX833X
 	bool
 	select CEVT_R4K
@@ -930,11 +945,6 @@ config SOC_PNX8550
 config SWAP_IO_SPACE
 	bool
 
-config EMMA2RH
-	bool
-	depends on MARKEINS
-	default y
-
 config SERIAL_RM9000
 	bool
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 21b00e95dae..22dab2e1434 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -416,7 +416,7 @@ load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
 #
 # Common NEC EMMAXXX
 #
-core-$(CONFIG_SOC_EMMA)		+= arch/mips/emma/common/
+core-$(CONFIG_SOC_EMMA2RH)	+= arch/mips/emma/common/
 cflags-$(CONFIG_SOC_EMMA2RH)	+= -I$(srctree)/arch/mips/include/asm/mach-emma2rh
 
 #
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index f2baea3039b..0208723adf2 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -512,7 +512,7 @@ CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
+CONFIG_MD_RAID456=y
 CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 9d5bd2a0af3..5380f1f582d 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:01:36 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar  4 23:07:16 2009
 #
 CONFIG_MIPS=y
 
@@ -18,8 +18,10 @@ CONFIG_MIPS=y
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
@@ -39,7 +41,11 @@ CONFIG_MIPS=y
 # CONFIG_SNI_RM is not set
 CONFIG_MACH_TX39XX=y
 # CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
 CONFIG_TOSHIBA_JMR3927=y
 CONFIG_SOC_TX3927=y
 # CONFIG_TOSHIBA_FPCIB0 is not set
@@ -54,12 +60,14 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_CEVT_TXX9=y
 CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
@@ -87,6 +95,7 @@ CONFIG_CPU_TX39XX=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -94,6 +103,7 @@ CONFIG_CPU_TX39XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_TX39XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -117,14 +127,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -159,6 +167,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
@@ -171,7 +188,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -188,26 +204,23 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -221,7 +234,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -231,12 +244,15 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
 CONFIG_MMU=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
@@ -245,15 +261,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -293,6 +306,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -302,14 +316,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -323,7 +332,89 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
@@ -336,6 +427,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -361,7 +453,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -383,6 +474,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -392,6 +486,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -399,6 +494,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -406,7 +504,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -415,9 +512,11 @@ CONFIG_TC35815=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -428,6 +527,10 @@ CONFIG_TC35815=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -440,27 +543,7 @@ CONFIG_TC35815=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -517,10 +600,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
@@ -528,6 +612,11 @@ CONFIG_HAVE_GPIO_LIB=y
 #
 
 #
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
 # SPI GPIO expanders:
 #
 # CONFIG_W1 is not set
@@ -542,6 +631,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_TXX9_WDT=y
 
 #
@@ -549,18 +639,21 @@ CONFIG_TXX9_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -591,16 +684,26 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -626,27 +729,34 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -676,28 +786,17 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
@@ -726,7 +825,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -734,15 +842,18 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/markeins_defconfig
index fea9bc9865a..bad8901f8f3 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -35,7 +35,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-CONFIG_MARKEINS=y
+CONFIG_NEC_MARKEINS=y
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -68,7 +68,7 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
-CONFIG_EMMA2RH=y
+CONFIG_SOC_EMMA2RH=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
@@ -574,9 +574,9 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x1e000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 83d5c58662c..1efe977497d 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:03:21 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar  4 23:08:06 2009
 #
 CONFIG_MIPS=y
 
@@ -18,8 +18,10 @@ CONFIG_MIPS=y
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
@@ -39,20 +41,28 @@ CONFIG_MIPS=y
 # CONFIG_SNI_RM is not set
 # CONFIG_MACH_TX39XX is not set
 CONFIG_MACH_TX49XX=y
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
 CONFIG_TOSHIBA_RBTX4927=y
 CONFIG_TOSHIBA_RBTX4938=y
+CONFIG_TOSHIBA_RBTX4939=y
 CONFIG_SOC_TX4927=y
 CONFIG_SOC_TX4938=y
+CONFIG_SOC_TX4939=y
+CONFIG_TXX9_7SEGLED=y
 # CONFIG_TOSHIBA_FPCIB0 is not set
 CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
 
 #
 # Multiplex Pin Select
 #
-CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y
 CONFIG_PCI_TX4927=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -64,14 +74,18 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
 CONFIG_CEVT_TXX9=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
@@ -100,6 +114,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_TX49XX=y
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -107,6 +122,7 @@ CONFIG_CPU_TX49XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_TX49XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
@@ -134,13 +150,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -176,6 +191,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -190,7 +214,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -207,30 +230,26 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -244,7 +263,8 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -254,12 +274,15 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_MMU=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
@@ -268,15 +291,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -318,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -327,14 +348,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -348,7 +364,90 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
@@ -365,9 +464,60 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_TX4938=y
+CONFIG_BLK_DEV_IDE_TX4939=y
+CONFIG_BLK_DEV_IDEDMA=y
 
 #
 # SCSI device support
@@ -390,7 +540,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -412,15 +561,19 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -429,6 +582,9 @@ CONFIG_NE2000=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -436,7 +592,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -445,9 +600,11 @@ CONFIG_TC35815=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -458,6 +615,10 @@ CONFIG_TC35815=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -502,6 +663,7 @@ CONFIG_SERIAL_TXX9_CONSOLE=y
 CONFIG_SERIAL_TXX9_STDSERIAL=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -517,17 +679,19 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Master Controller Drivers
 #
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_TXX9=y
 
 #
 # SPI Protocol Masters
 #
-CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
@@ -535,8 +699,14 @@ CONFIG_HAVE_GPIO_LIB=y
 #
 
 #
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
@@ -550,6 +720,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_TXX9_WDT=m
 
 #
@@ -557,18 +728,21 @@ CONFIG_TXX9_WDT=m
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -599,15 +773,27 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -628,35 +814,47 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 CONFIG_RTC_DRV_RS5C348=y
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_TX4939=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -687,30 +885,19 @@ CONFIG_GENERIC_ACL=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -740,7 +927,16 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -748,15 +944,18 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/emma/Kconfig b/arch/mips/emma/Kconfig
deleted file mode 100644
index 9669c72123c..00000000000
--- a/arch/mips/emma/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-choice
-	prompt "Machine type"
-	depends on MACH_EMMA
-	default NEC_MARKEINS
-
-config NEC_MARKEINS
-	bool "NEC EMMA2RH Mark-eins board"
-	select SOC_EMMA2RH
-	select HW_HAS_PCI
-	help
-	  This enables support for the NEC Electronics Mark-eins boards.
-
-endchoice
-
-config SOC_EMMA2RH
-	bool
-	select SOC_EMMA
-	select SYS_HAS_CPU_R5500
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-
-config SOC_EMMA
-	bool
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c
index 88e87f6b344..d5f47e4f0d1 100644
--- a/arch/mips/emma/markeins/platform.c
+++ b/arch/mips/emma/markeins/platform.c
@@ -141,13 +141,6 @@ static struct  platform_device serial_emma = {
 	},
 };
 
-static struct platform_device *devices[] = {
-	&i2c_emma_devices[0],
-	&i2c_emma_devices[1],
-	&i2c_emma_devices[2],
-	&serial_emma,
-};
-
 static struct mtd_partition markeins_parts[] = {
 	[0] = {
 		.name = "RootFS",
@@ -181,11 +174,39 @@ static struct mtd_partition markeins_parts[] = {
 	},
 };
 
+static struct physmap_flash_data markeins_flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(markeins_parts),
+	.parts		= markeins_parts
+};
+
+static struct resource markeins_flash_resource = {
+	.start		= 0x1e000000,
+	.end		= 0x02000000,
+	.flags		= IORESOURCE_MEM
+};
+
+static struct platform_device markeins_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+        	.platform_data  = &markeins_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &markeins_flash_resource,
+};
+
+static struct platform_device *devices[] = {
+	i2c_emma_devices,
+	i2c_emma_devices + 1,
+	i2c_emma_devices + 2,
+	&serial_emma,
+	&markeins_flash_device,
+};
+
 static int __init platform_devices_setup(void)
 {
-	physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
 	return platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 arch_initcall(platform_devices_setup);
-
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index ac5d541368e..6c5b40905dd 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -3,6 +3,8 @@
 /*
  * Architecture specific compatibility types
  */
+#include <linux/seccomp.h>
+#include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
@@ -218,4 +220,9 @@ struct compat_shmid64_ds {
 	compat_ulong_t	__unused2;
 };
 
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_32BIT);
+}
+
 #endif /* _ASM_COMPAT_H */
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index 43baed16a10..134e1fc8f4d 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -138,7 +138,8 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+      defined(CONFIG_CPU_R5500)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h
index 17850834ccb..a56594f360e 100644
--- a/arch/mips/include/asm/prefetch.h
+++ b/arch/mips/include/asm/prefetch.h
@@ -26,7 +26,7 @@
  * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
  * current versions due to erratum G105.
  *
- * VR7701 only implements the Load prefetch.
+ * VR5500 (including VR5701 and VR7701) only implement load prefetch.
  *
  * Finally MIPS32 and MIPS64 implement all of the following hints.
  */
diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h
index a6772e9507f..ae6306ebdca 100644
--- a/arch/mips/include/asm/seccomp.h
+++ b/arch/mips/include/asm/seccomp.h
@@ -15,8 +15,6 @@
  */
 #ifdef CONFIG_MIPS32_O32
 
-#define TIF_32BIT TIF_32BIT_REGS
-
 #define __NR_seccomp_read_32		4003
 #define __NR_seccomp_write_32		4004
 #define __NR_seccomp_exit_32		4001
@@ -24,8 +22,6 @@
 
 #elif defined(CONFIG_MIPS32_N32)
 
-#define TIF_32BIT _TIF_32BIT_ADDR
-
 #define __NR_seccomp_read_32		6000
 #define __NR_seccomp_write_32		6001
 #define __NR_seccomp_exit_32		6058
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 3f76de73c94..676aa2ae191 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -127,6 +127,12 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
+#ifdef CONFIG_MIPS32_O32
+#define TIF_32BIT TIF_32BIT_REGS
+#elif defined(CONFIG_MIPS32_N32)
+#define TIF_32BIT _TIF_32BIT_ADDR
+#endif /* CONFIG_MIPS32_O32 */
+
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index a7162a4484c..1bdbcad3bb7 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -149,6 +149,7 @@ void __init check_wait(void)
 	case CPU_R4650:
 	case CPU_R4700:
 	case CPU_R5000:
+	case CPU_R5500:
 	case CPU_NEVADA:
 	case CPU_4KC:
 	case CPU_4KEC:
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 2f8452b404c..1a86f84fa94 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -235,7 +235,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
 #else
 
 SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
-	u32, ptr, u32 fifth)
+	u32, ptr, u32, fifth)
 {
 	return -ENOSYS;
 }
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index 1417c649485..48060c635ac 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -172,8 +172,9 @@ static void __cpuinit set_prefetch_parameters(void)
 		 */
 		cache_line_size = cpu_dcache_line_size();
 		switch (current_cpu_type()) {
+		case CPU_R5500:
 		case CPU_TX49XX:
-			/* TX49 supports only Pref_Load */
+			/* These processors only support the Pref_Load. */
 			pref_bias_copy_load = 256;
 			break;
 
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 42942038d0f..f335cf6cdd7 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -318,6 +318,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_BCM4710:
 	case CPU_LOONGSON2:
 	case CPU_CAVIUM_OCTEON:
+	case CPU_R5500:
 		if (m4kc_tlbp_war())
 			uasm_i_nop(p);
 		tlbw(p);
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 9fc96e72716..bf34a28895f 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:00:07 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:55 2009
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -55,29 +73,38 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,6 +118,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -114,17 +142,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_HPUX is not set
 
 #
@@ -138,10 +168,6 @@ CONFIG_GSC_LASI=y
 # CONFIG_EISA is not set
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -156,16 +182,15 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -173,6 +198,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -203,25 +229,25 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -230,6 +256,7 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -240,28 +267,26 @@ CONFIG_LLC2=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -276,6 +301,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -298,11 +325,19 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
 # CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -342,14 +377,17 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_LASI700=y
 CONFIG_53C700_LE_ON_BE=y
 # CONFIG_SCSI_ZALON is not set
 CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -362,7 +400,6 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -377,6 +414,9 @@ CONFIG_LASI_82596=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
 CONFIG_NETDEV_1000=y
@@ -387,6 +427,11 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -401,7 +446,6 @@ CONFIG_PPPOE=m
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -423,7 +467,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -446,8 +489,8 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -474,9 +517,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -501,72 +546,76 @@ CONFIG_PDC_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -579,6 +628,14 @@ CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_STI=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -606,15 +663,8 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -630,10 +680,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
@@ -641,63 +688,82 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 # CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
 CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -707,7 +773,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
@@ -717,19 +783,18 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -759,16 +824,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -778,35 +840,34 @@ CONFIG_RAMFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
@@ -815,6 +876,7 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
@@ -827,10 +889,6 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -871,33 +929,28 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -909,10 +962,32 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_RODATA=y
 
 #
@@ -921,57 +996,113 @@ CONFIG_DEBUG_RODATA=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index ddacc72e38f..f12e4b8349d 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:12:44 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:56 2009
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -34,18 +34,30 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CPUSETS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -57,28 +69,40 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -93,6 +117,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -118,12 +143,12 @@ CONFIG_NODES_SHIFT=3
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM_MANUAL=y
@@ -131,11 +156,12 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_COMPAT=y
 CONFIG_NR_CPUS=8
 
@@ -145,14 +171,13 @@ CONFIG_NR_CPUS=8
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
@@ -187,16 +212,15 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -204,6 +228,8 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -234,7 +260,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -250,66 +275,72 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 # CONFIG_NETFILTER_XT_MATCH_MAC is not set
 # CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 # CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 # CONFIG_NETFILTER_XT_MATCH_STRING is not set
 # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
 # CONFIG_NETFILTER_XT_MATCH_TIME is not set
 # CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 # CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
@@ -318,33 +349,30 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 # CONFIG_IP6_NF_QUEUE is not set
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-# CONFIG_IP6_NF_MATCH_OWNER is not set
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 # CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
 # CONFIG_IP_DCCP_CCID3 is not set
 
@@ -356,6 +384,7 @@ CONFIG_IP_DCCP_CCID2=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -366,28 +395,26 @@ CONFIG_LLC2=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -402,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -421,14 +450,23 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -468,8 +506,10 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -478,16 +518,21 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
@@ -503,9 +548,11 @@ CONFIG_SCSI_QLOGIC_1280=m
 CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -514,10 +561,6 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=m
 CONFIG_FUSION_FC=m
@@ -529,20 +572,40 @@ CONFIG_FUSION_CTL=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
@@ -567,33 +630,38 @@ CONFIG_HP100=m
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -601,23 +669,31 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -625,6 +701,11 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
@@ -650,7 +731,6 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -669,7 +749,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -693,10 +772,13 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -721,17 +803,12 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-CONFIG_AGP=y
-CONFIG_AGP_PARISC=y
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -739,51 +816,66 @@ CONFIG_AGP_PARISC=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -792,50 +884,83 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
 # CONFIG_STI_CONSOLE is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
-#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -845,7 +970,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
@@ -855,19 +980,19 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -897,16 +1022,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -916,34 +1038,33 @@ CONFIG_RAMFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
@@ -952,6 +1073,7 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
@@ -964,10 +1086,6 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1008,33 +1126,28 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1046,10 +1159,33 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_RODATA is not set
 
 #
@@ -1058,56 +1194,112 @@ CONFIG_FORCED_INLINING=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 1bf22c9a461..98bb05ee6e8 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:16:46 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:57 2009
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -33,13 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -51,27 +67,34 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -85,6 +108,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -108,13 +132,15 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_HPUX is not set
 
 #
@@ -130,14 +156,14 @@ CONFIG_EISA_NAMES=y
 CONFIG_ISA=y
 CONFIG_PCI=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_GSC_DINO=y
 # CONFIG_PCI_LBA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # PA-RISC specific drivers
@@ -151,16 +177,15 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -205,36 +230,37 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -247,7 +273,9 @@ CONFIG_IPV6_SIT=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -275,10 +303,18 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=y
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -317,8 +353,10 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -330,12 +368,15 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -346,6 +387,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_NCR53C406A is not set
 CONFIG_SCSI_LASI700=y
 CONFIG_53C700_LE_ON_BE=y
@@ -360,7 +402,6 @@ CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
 CONFIG_SCSI_NCR53C8XX_SYNC=40
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
@@ -373,9 +414,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=40
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -383,26 +426,18 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -434,36 +469,49 @@ CONFIG_TULIP=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -471,6 +519,11 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PLIP is not set
@@ -503,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -526,11 +578,12 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -564,9 +617,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -598,75 +653,79 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -691,6 +750,7 @@ CONFIG_FB_STI=y
 # CONFIG_FB_ATY is not set
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -698,7 +758,16 @@ CONFIG_FB_STI=y
 # CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -718,15 +787,8 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -742,10 +804,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
@@ -753,10 +812,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 # CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -765,9 +821,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_DARLA20 is not set
@@ -792,6 +850,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -809,30 +868,23 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
 CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -840,36 +892,63 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -879,19 +958,18 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -917,35 +995,32 @@ CONFIG_JOLIET=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
@@ -962,10 +1037,6 @@ CONFIG_SMB_FS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1011,7 +1082,9 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1019,9 +1092,12 @@ CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1033,10 +1109,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_RODATA is not set
 
 #
@@ -1044,52 +1139,108 @@ CONFIG_FORCED_INLINING=y
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_PCBC is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index c6def3c1d20..0aa8014f758 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:24:00 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:58 2009
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -33,16 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -54,29 +67,39 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -90,6 +113,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -115,17 +139,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_HPUX is not set
 
 #
@@ -134,14 +160,13 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -158,16 +183,15 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -175,6 +199,8 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -204,7 +230,6 @@ CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -220,29 +245,34 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 CONFIG_NETFILTER_DEBUG=y
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
@@ -251,6 +281,7 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -260,28 +291,26 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -296,6 +325,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -316,59 +347,62 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_ONLYDISK=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 CONFIG_BLK_DEV_NS87415=y
@@ -380,10 +414,7 @@ CONFIG_BLK_DEV_SIIMAGE=m
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -422,8 +453,10 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -433,16 +466,20 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -458,9 +495,11 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_NSP32 is not set
 CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -475,13 +514,8 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=m
 # CONFIG_FUSION_FC is not set
@@ -493,20 +527,40 @@ CONFIG_FUSION_CTL=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
@@ -528,33 +582,38 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -562,23 +621,31 @@ CONFIG_E1000=m
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -586,6 +653,11 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -594,7 +666,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -612,7 +683,6 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -634,7 +704,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -652,6 +721,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -672,10 +742,13 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -699,72 +772,77 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -790,6 +868,7 @@ CONFIG_FB_STI=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -798,7 +877,16 @@ CONFIG_FB_STI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -818,15 +906,8 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -842,20 +923,16 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 CONFIG_SND_AD1889=y
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -864,10 +941,12 @@ CONFIG_SND_AD1889=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_DARLA20 is not set
@@ -892,6 +971,7 @@ CONFIG_SND_AD1889=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -909,47 +989,59 @@ CONFIG_SND_AD1889=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -958,12 +1050,20 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -971,32 +1071,37 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
 CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1004,15 +1109,10 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1021,7 +1121,7 @@ CONFIG_USB_MICROTEK=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 # CONFIG_USB_LCD is not set
@@ -1037,37 +1137,59 @@ CONFIG_USB_LEGOTOWER=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
+# OTG and related infrastructure
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1077,25 +1199,24 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1124,16 +1245,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1142,32 +1260,31 @@ CONFIG_RAMFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1181,10 +1298,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1225,33 +1338,28 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1263,10 +1371,33 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_RODATA=y
 
 #
@@ -1274,54 +1405,110 @@ CONFIG_DEBUG_RODATA=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig
index 448a757b06c..283a96c1b5e 100644
--- a/arch/parisc/configs/default_defconfig
+++ b/arch/parisc/configs/default_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 20:54:57 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:59 2009
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -55,29 +73,39 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -114,17 +143,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_HPUX is not set
 
 #
@@ -140,15 +171,14 @@ CONFIG_EISA_NAMES=y
 # CONFIG_ISA is not set
 CONFIG_PCI=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_GSC_DINO=y
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -183,16 +213,15 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -200,6 +229,8 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -245,8 +276,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -254,6 +287,7 @@ CONFIG_IPV6_SIT=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -264,28 +298,26 @@ CONFIG_LLC2=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -300,6 +332,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -330,63 +364,68 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_ONLYDISK=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 CONFIG_BLK_DEV_NS87415=y
@@ -398,10 +437,7 @@ CONFIG_BLK_DEV_NS87415=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -440,8 +476,10 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -452,11 +490,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -464,6 +505,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
 CONFIG_SCSI_LASI700=y
 CONFIG_53C700_LE_ON_BE=y
 # CONFIG_SCSI_STEX is not set
@@ -487,9 +529,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -505,32 +549,47 @@ CONFIG_BLK_DEV_DM=y
 # CONFIG_DM_ZERO is not set
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_LASI_82596=y
@@ -550,13 +609,15 @@ CONFIG_TULIP=y
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCMCIA_XIRTULIP is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -564,7 +625,7 @@ CONFIG_NET_PCI=y
 # CONFIG_AC3200 is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_E100 is not set
 # CONFIG_LNE390 is not set
 # CONFIG_FEALNX is not set
@@ -574,19 +635,24 @@ CONFIG_NET_PCI=y
 # CONFIG_ES3210 is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=y
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -594,23 +660,31 @@ CONFIG_ACENIC=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -618,6 +692,11 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -626,7 +705,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
@@ -654,7 +732,6 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -676,7 +753,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -699,11 +775,12 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_HIL=y
 # CONFIG_INPUT_JOYSTICK is not set
@@ -729,10 +806,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -759,21 +839,16 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -781,60 +856,70 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -860,6 +945,7 @@ CONFIG_FB_STI=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -868,7 +954,16 @@ CONFIG_FB_STI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -896,15 +991,8 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -920,11 +1008,9 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
@@ -932,10 +1018,8 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 # CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 CONFIG_SND_AD1889=y
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -944,10 +1028,12 @@ CONFIG_SND_AD1889=y
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_DARLA20 is not set
@@ -972,6 +1058,7 @@ CONFIG_SND_AD1889=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -989,58 +1076,67 @@ CONFIG_SND_AD1889=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
 CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1049,12 +1145,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1062,19 +1164,23 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1084,16 +1190,11 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1102,7 +1203,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1118,38 +1219,60 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
+# OTG and related infrastructure
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
-# CONFIG_AUXDISPLAY is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1159,21 +1282,20 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1202,16 +1324,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1221,33 +1340,32 @@ CONFIG_RAMFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
@@ -1256,6 +1374,7 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
@@ -1268,10 +1387,6 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1312,33 +1427,28 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1350,10 +1460,33 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_RODATA is not set
 
 #
@@ -1362,56 +1495,112 @@ CONFIG_FORCED_INLINING=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index bd9a4db3bd4..5cbe9f9e5d9 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -137,7 +137,6 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i
 			error = count - buf.count;
 	}
 
-out_putf:
 	fput(file);
 out:
 	return error;
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index ffb208840ec..89fb40005e3 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -79,6 +79,7 @@
 
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
+#include <asm/types.h>
 
 #include <asm/asmregs.h>
 
@@ -129,27 +130,27 @@
 
 	/* Shift Left - note the r and t can NOT be the same! */
 	.macro shl r, sa, t
-	dep,z	\r, 31-\sa, 32-\sa, \t
+	dep,z	\r, 31-(\sa), 32-(\sa), \t
 	.endm
 
 	/* The PA 2.0 shift left */
 	.macro shlw r, sa, t
-	depw,z	\r, 31-\sa, 32-\sa, \t
+	depw,z	\r, 31-(\sa), 32-(\sa), \t
 	.endm
 
 	/* And the PA 2.0W shift left */
 	.macro shld r, sa, t
-	depd,z	\r, 63-\sa, 64-\sa, \t
+	depd,z	\r, 63-(\sa), 64-(\sa), \t
 	.endm
 
 	/* Shift Right - note the r and t can NOT be the same! */
 	.macro shr r, sa, t
-	extru \r, 31-\sa, 32-\sa, \t
+	extru \r, 31-(\sa), 32-(\sa), \t
 	.endm
 
 	/* pa20w version of shift right */
 	.macro shrd r, sa, t
-	extrd,u \r, 63-\sa, 64-\sa, \t
+	extrd,u \r, 63-(\sa), 64-(\sa), \t
 	.endm
 
 	/* load 32-bit 'value' into 'reg' compensating for the ldil
diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h
index d3031d1f9d0..1f6d2ae7aba 100644
--- a/arch/parisc/include/asm/io.h
+++ b/arch/parisc/include/asm/io.h
@@ -174,15 +174,48 @@ static inline void __raw_writeq(unsigned long long b, volatile void __iomem *add
 	*(volatile unsigned long long __force *) addr = b;
 }
 
-/* readb can never be const, so use __fswab instead of le*_to_cpu */
-#define readb(addr) __raw_readb(addr)
-#define readw(addr) le16_to_cpu(__raw_readw(addr))
-#define readl(addr) le32_to_cpu(__raw_readl(addr))
-#define readq(addr) le64_to_cpu(__raw_readq(addr))
-#define writeb(b, addr) __raw_writeb(b, addr)
-#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr)
-#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr)
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+	return __raw_readb(addr);
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+	return le16_to_cpu(__raw_readw(addr));
+}
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+	return le32_to_cpu(__raw_readl(addr));
+}
+static inline unsigned long long readq(const volatile void __iomem *addr)
+{
+	return le64_to_cpu(__raw_readq(addr));
+}
+
+static inline void writeb(unsigned char b, volatile void __iomem *addr)
+{
+	__raw_writeb(b, addr);
+}
+static inline void writew(unsigned short w, volatile void __iomem *addr)
+{
+	__raw_writew(cpu_to_le16(w), addr);
+}
+static inline void writel(unsigned int l, volatile void __iomem *addr)
+{
+	__raw_writel(cpu_to_le32(l), addr);
+}
+static inline void writeq(unsigned long long q, volatile void __iomem *addr)
+{
+	__raw_writeq(cpu_to_le64(q), addr);
+}
+
+#define	readb	readb
+#define	readw	readw
+#define	readl	readl
+#define readq	readq
+#define writeb	writeb
+#define writew	writew
+#define writel	writel
+#define writeq	writeq
 
 #define readb_relaxed(addr) readb(addr)
 #define readw_relaxed(addr) readw(addr)
diff --git a/arch/parisc/include/asm/irq.h b/arch/parisc/include/asm/irq.h
index 399c81981ed..dfa26b67f91 100644
--- a/arch/parisc/include/asm/irq.h
+++ b/arch/parisc/include/asm/irq.h
@@ -49,7 +49,7 @@ extern unsigned long txn_alloc_addr(unsigned int);
 extern unsigned long txn_affinity_addr(unsigned int irq, int cpu);
 
 extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *);
-extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest);
+extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest);
 
 /* soft power switch support (power.c) */
 extern struct tasklet_struct power_tasklet;
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index 1c6dbb6f6e5..cd4c0b2a8e7 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -241,6 +241,7 @@ unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned lo
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
+struct pt_regs;
 int fixup_exception(struct pt_regs *regs);
 
 #endif /* __PARISC_UACCESS_H */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 5259d8c2067..837530ea32e 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -551,10 +551,7 @@ void flush_cache_range(struct vm_area_struct *vma,
 {
 	int sr3;
 
-	if (!vma->vm_mm->context) {
-		BUG();
-		return;
-	}
+	BUG_ON(!vma->vm_mm->context);
 
 	sr3 = mfsp(3);
 	if (vma->vm_mm->context == sr3) {
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index d1fa4edd2d8..0db9fdcb770 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -368,7 +368,7 @@
 	 * abstractions for the macros */
 	.macro		EXTR	reg1,start,length,reg2
 #ifdef CONFIG_64BIT
-	extrd,u		\reg1,32+\start,\length,\reg2
+	extrd,u		\reg1,32+(\start),\length,\reg2
 #else
 	extrw,u		\reg1,\start,\length,\reg2
 #endif
@@ -376,7 +376,7 @@
 
 	.macro		DEP	reg1,start,length,reg2
 #ifdef CONFIG_64BIT
-	depd		\reg1,32+\start,\length,\reg2
+	depd		\reg1,32+(\start),\length,\reg2
 #else
 	depw		\reg1,\start,\length,\reg2
 #endif
@@ -384,7 +384,7 @@
 
 	.macro		DEPI	val,start,length,reg
 #ifdef CONFIG_64BIT
-	depdi		\val,32+\start,\length,\reg
+	depdi		\val,32+(\start),\length,\reg
 #else
 	depwi		\val,\start,\length,\reg
 #endif
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index 03f26bd75bd..f6d241238a7 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -151,7 +151,7 @@ static void convert_to_wide(unsigned long *addr)
 }
 
 #ifdef CONFIG_64BIT
-void __init set_firmware_width_unlocked(void)
+void __cpuinit set_firmware_width_unlocked(void)
 {
 	int ret;
 
@@ -168,7 +168,7 @@ void __init set_firmware_width_unlocked(void)
  * This function must be called before any pdc_* function that uses the
  * convert_to_wide function.
  */
-void __init set_firmware_width(void)
+void __cpuinit set_firmware_width(void)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&pdc_lock, flags);
@@ -176,11 +176,11 @@ void __init set_firmware_width(void)
 	spin_unlock_irqrestore(&pdc_lock, flags);
 }
 #else
-void __init set_firmware_width_unlocked(void) {
+void __cpuinit set_firmware_width_unlocked(void) {
 	return;
 }
 
-void __init set_firmware_width(void) {
+void __cpuinit set_firmware_width(void) {
 	return;
 }
 #endif /*CONFIG_64BIT*/
@@ -302,7 +302,7 @@ int pdc_chassis_warn(unsigned long *warn)
 	return retval;
 }
 
-int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
+int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
 {
 	int ret;
 
@@ -323,7 +323,7 @@ int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
  * This PDC call returns the presence and status of all the coprocessors
  * attached to the processor.
  */
-int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
+int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
 {
 	int ret;
 	unsigned long flags;
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index ac2c822928c..29e70e16ede 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -112,7 +112,7 @@ void cpu_end_irq(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
+int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu_dest;
 
@@ -120,23 +120,25 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
 	if (CHECK_IRQ_PER_CPU(irq)) {
 		/* Bad linux design decision.  The mask has already
 		 * been set; we must reset it */
-		irq_desc[irq].affinity = CPU_MASK_ALL;
+		cpumask_setall(&irq_desc[irq].affinity);
 		return -EINVAL;
 	}
 
 	/* whatever mask they set, we just allow one CPU */
 	cpu_dest = first_cpu(*dest);
-	*dest = cpumask_of_cpu(cpu_dest);
 
-	return 0;
+	return cpu_dest;
 }
 
 static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 {
-	if (cpu_check_affinity(irq, dest))
+	int cpu_dest;
+
+	cpu_dest = cpu_check_affinity(irq, dest);
+	if (cpu_dest < 0)
 		return;
 
-	irq_desc[irq].affinity = *dest;
+	cpumask_copy(&irq_desc[irq].affinity, &cpumask_of_cpu(cpu_dest));
 }
 #endif
 
@@ -295,7 +297,7 @@ int txn_alloc_irq(unsigned int bits_wide)
 unsigned long txn_affinity_addr(unsigned int irq, int cpu)
 {
 #ifdef CONFIG_SMP
-	irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+	cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
 #endif
 
 	return per_cpu(cpu_data, cpu).txn_addr;
@@ -352,7 +354,7 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq = eirr_to_irq(eirr_val);
 
 #ifdef CONFIG_SMP
-	dest = irq_desc[irq].affinity;
+	cpumask_copy(&dest, &irq_desc[irq].affinity);
 	if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
 	    !cpu_isset(smp_processor_id(), dest)) {
 		int cpu = first_cpu(dest);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index df47895db82..7d927eac932 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -447,10 +447,7 @@ static void pa11_dma_free_consistent (struct device *dev, size_t size, void *vad
 
 static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE) {
-		printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
-		BUG();
-	}
+	BUG_ON(direction == DMA_NONE);
 
 	flush_kernel_dcache_range((unsigned long) addr, size);
 	return virt_to_phys(addr);
@@ -458,10 +455,7 @@ static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t siz
 
 static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE) {
-		printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
-		BUG();
-	}
+	BUG_ON(direction == DMA_NONE);
 
 	if (direction == DMA_TO_DEVICE)
 	    return;
@@ -480,8 +474,7 @@ static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist, int n
 {
 	int i;
 
-	if (direction == DMA_NONE)
-	    BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	for (i = 0; i < nents; i++, sglist++ ) {
 		unsigned long vaddr = sg_virt_addr(sglist);
@@ -496,8 +489,7 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in
 {
 	int i;
 
-	if (direction == DMA_NONE)
-	    BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	if (direction == DMA_TO_DEVICE)
 	    return;
@@ -511,16 +503,14 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in
 
 static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE)
-	    BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
 }
 
 static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
 {
-	if (direction == DMA_NONE)
-	    BUG();
+	BUG_ON(direction == DMA_NONE);
 
 	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
 }
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 7c155c254e7..9d704d9831d 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -304,10 +304,8 @@ static void __init setup_bootmem(void)
 	 */
 	max_low_pfn = max_pfn;
 
-	if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) {
-		printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n");
-		BUG();
-	}
+	/* bootmap sizing messed up? */
+	BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages);
 
 	/* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */
 
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index b6888384dd7..f5698f962e5 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -686,7 +686,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 15aab1ca638..1bf0a63614b 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -691,7 +691,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index aa5855a156d..15900dcf0bf 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:29 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar  6 00:07:38 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -71,6 +71,15 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -88,6 +97,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -153,11 +163,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -294,7 +299,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
 CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
@@ -508,8 +512,8 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -587,7 +591,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -617,13 +620,19 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -839,6 +848,7 @@ CONFIG_R8169=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -1037,8 +1047,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index b6eee7c93cd..ac14f5245d2 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc3
-# Wed Aug 20 08:16:53 2008
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 09:28:45 2009
 #
 CONFIG_PPC64=y
 
@@ -16,13 +16,14 @@ CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 # CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_64=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_64BIT=y
 CONFIG_WORD_SIZE=64
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -46,7 +47,7 @@ CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -74,10 +75,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -86,11 +96,13 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -99,37 +111,36 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
@@ -157,7 +167,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
@@ -183,18 +193,20 @@ CONFIG_PS3_STORAGE=y
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=y
 CONFIG_PS3_FLASH=y
-CONFIG_OPROFILE_PS3=y
+CONFIG_PS3_VRAM=m
 CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 # CONFIG_PPC_CELLEB is not set
+# CONFIG_PPC_CELL_QPACE is not set
 
 #
 # Cell Broadband Engine options
 #
 CONFIG_SPU_FS=y
 CONFIG_SPU_FS_64K_LS=y
+# CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
 # CONFIG_IPIC is not set
@@ -210,6 +222,7 @@ CONFIG_SPU_BASE=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -229,6 +242,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
@@ -251,7 +266,6 @@ CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
@@ -261,11 +275,14 @@ CONFIG_MEMORY_HOTPLUG_SPARSE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
@@ -299,6 +316,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -361,6 +379,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -371,6 +390,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -392,39 +412,37 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
 # CONFIG_BT_HCIBPA10X is not set
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 # CONFIG_WIRELESS_EXT_SYSFS is not set
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
 CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT="pid"
 # CONFIG_MAC80211_MESH is not set
 # CONFIG_MAC80211_LEDS is not set
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -450,6 +468,7 @@ CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -494,7 +513,6 @@ CONFIG_MTD_CFI_I2=y
 #
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_PS3VRAM=y
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
@@ -508,6 +526,11 @@ CONFIG_MTD_PS3VRAM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -528,8 +551,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65535
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -575,7 +603,17 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-# CONFIG_MD is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
@@ -591,6 +629,9 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_GELIC_NET=y
@@ -604,6 +645,7 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_RTL8187 is not set
@@ -615,13 +657,11 @@ CONFIG_WLAN_80211=y
 # CONFIG_B43LEGACY is not set
 CONFIG_ZD1211RW=m
 # CONFIG_ZD1211RW_DEBUG is not set
-CONFIG_RT2X00=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-# CONFIG_RT2500USB is not set
-CONFIG_RT73USB=m
-# CONFIG_RT2X00_DEBUG is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -634,6 +674,7 @@ CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 # CONFIG_USB_NET_CDCETHER is not set
 # CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
 # CONFIG_USB_NET_PLUSB is not set
@@ -664,7 +705,7 @@ CONFIG_SLHC=m
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -735,8 +776,10 @@ CONFIG_DEVKMEM=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -753,11 +796,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -767,6 +810,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -792,6 +836,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
@@ -817,6 +862,8 @@ CONFIG_FB_SYS_FOPS=y
 CONFIG_FB_PS3=y
 CONFIG_FB_PS3_DEFAULT_SIZE_M=9
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -841,6 +888,7 @@ CONFIG_FB_LOGO_EXTRA=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -849,6 +897,7 @@ CONFIG_SND_RAWMIDI=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -873,15 +922,40 @@ CONFIG_HIDRAW=y
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
 
 #
 # USB HID Boot Protocol drivers
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -898,7 +972,11 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -909,6 +987,7 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
@@ -918,6 +997,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # Enable Host or Gadget support to see Inventra options
@@ -929,20 +1009,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -950,7 +1030,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -971,6 +1050,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -988,7 +1068,12 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1014,12 +1099,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1028,6 +1116,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_PPC=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1035,26 +1124,35 @@ CONFIG_RTC_DRV_PPC=m
 CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -1087,16 +1185,14 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1106,6 +1202,7 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1126,6 +1223,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1190,9 +1288,9 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
@@ -1250,27 +1348,44 @@ CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
@@ -1282,16 +1397,26 @@ CONFIG_IRQSTACKS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1363,6 +1488,11 @@ CONFIG_CRYPTO_SALSA20=m
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 86512c8790d..94903465ea1 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:46 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar  6 00:09:08 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -71,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -144,11 +153,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -377,8 +381,8 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -452,7 +456,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -478,13 +481,19 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -677,6 +686,7 @@ CONFIG_R8169=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -818,8 +828,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1159,6 +1167,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_EXPORTFS=m
 
 #
 # Partition Types
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 4911104791c..21172badd70 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -241,9 +241,11 @@ extern const char *powerpc_base_platform;
 /* We need to mark all pages as being coherent if we're SMP or we have a
  * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
  * require it for PCI "streaming/prefetch" to work properly.
+ * This is also required by 52xx family.
  */
 #if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
-	|| defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
+	|| defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) \
+	|| defined(CONFIG_PPC_MPC52xx)
 #define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
 #else
 #define CPU_FTR_COMMON                  0
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index a1c4cfd25de..d794a637e42 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -511,8 +511,11 @@ InstructionTLBMiss:
 	and	r1,r1,r2		/* writable if _RW and _DIRTY */
 	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
 	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r1,r1,0xe14		/* clear out reserved bits and M */
+	ori	r1,r1,0xe04		/* clear out reserved bits */
 	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
+BEGIN_FTR_SECTION
+	rlwinm	r1,r1,0,~_PAGE_COHERENT	/* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	mtspr	SPRN_RPA,r1
 	mfspr	r3,SPRN_IMISS
 	tlbli	r3
@@ -585,8 +588,11 @@ DataLoadTLBMiss:
 	and	r1,r1,r2		/* writable if _RW and _DIRTY */
 	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
 	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r1,r1,0xe14		/* clear out reserved bits and M */
+	ori	r1,r1,0xe04		/* clear out reserved bits */
 	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
+BEGIN_FTR_SECTION
+	rlwinm	r1,r1,0,~_PAGE_COHERENT	/* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	mtspr	SPRN_RPA,r1
 	mfspr	r3,SPRN_DMISS
 	tlbld	r3
@@ -653,8 +659,11 @@ DataStoreTLBMiss:
 	stw	r3,0(r2)		/* update PTE (accessed/dirty bits) */
 	/* Convert linux-style PTE to low word of PPC-style PTE */
 	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	li	r1,0xe15		/* clear out reserved bits and M */
+	li	r1,0xe05		/* clear out reserved bits & PP lsb */
 	andc	r1,r3,r1		/* PP = user? 2: 0 */
+BEGIN_FTR_SECTION
+	rlwinm	r1,r1,0,~_PAGE_COHERENT	/* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	mtspr	SPRN_RPA,r1
 	mfspr	r3,SPRN_DMISS
 	tlbld	r3
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 2ca7be65c2d..244f997de79 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -12,7 +12,6 @@
 
 #include <linux/kernel.h>
 #include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
 #include <linux/of_platform.h>
 
 #include <asm/time.h>
@@ -22,39 +21,6 @@
 
 #include "mpc10x.h"
 
-static struct mtd_partition linkstation_physmap_partitions[] = {
-	{
-		.name   = "mtd_firmimg",
-		.offset = 0x000000,
-		.size   = 0x300000,
-	},
-	{
-		.name   = "mtd_bootcode",
-		.offset = 0x300000,
-		.size   = 0x070000,
-	},
-	{
-		.name   = "mtd_status",
-		.offset = 0x370000,
-		.size   = 0x010000,
-	},
-	{
-		.name   = "mtd_conf",
-		.offset = 0x380000,
-		.size   = 0x080000,
-	},
-	{
-		.name   = "mtd_allflash",
-		.offset = 0x000000,
-		.size   = 0x400000,
-	},
-	{
-		.name   = "mtd_data",
-		.offset = 0x310000,
-		.size   = 0x0f0000,
-	},
-};
-
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "simple-bus", },
@@ -99,10 +65,6 @@ static int __init linkstation_add_bridge(struct device_node *dev)
 static void __init linkstation_setup_arch(void)
 {
 	struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
-	physmap_set_partitions(linkstation_physmap_partitions,
-			       ARRAY_SIZE(linkstation_physmap_partitions));
-#endif
 
 	/* Lookup PCI host bridges */
 	for_each_compatible_node(np, "pci", "mpc10x-pci")
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 8864e488498..613070e9ddb 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
 #include <linux/of_platform.h>
 
 #include <asm/system.h>
@@ -26,32 +25,6 @@
 #include "mpc10x.h"
 
 
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition storcenter_physmap_partitions[] = {
-	{
-		.name   = "kernel",
-		.offset = 0x000000,
-		.size   = 0x170000,
-	},
-	{
-		.name   = "rootfs",
-		.offset = 0x170000,
-		.size   = 0x590000,
-	},
-	{
-		.name   = "uboot",
-		.offset = 0x700000,
-		.size   = 0x040000,
-	},
-	{
-		.name   = "config",
-		.offset = 0x740000,
-		.size   = 0x0c0000,
-	},
-};
-#endif
-
-
 static __initdata struct of_device_id storcenter_of_bus[] = {
 	{ .name = "soc", },
 	{},
@@ -96,11 +69,6 @@ static void __init storcenter_setup_arch(void)
 {
 	struct device_node *np;
 
-#ifdef CONFIG_MTD_PHYSMAP
-	physmap_set_partitions(storcenter_physmap_partitions,
-			       ARRAY_SIZE(storcenter_physmap_partitions));
-#endif
-
 	/* Lookup PCI host bridges */
 	for_each_compatible_node(np, "pci", "mpc10x-pci")
 		storcenter_add_bridge(np);
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 920cf7a454b..740ef56a155 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -128,6 +128,13 @@ config PS3_FLASH
 	  be disabled on the kernel command line using "ps3flash=off", to
 	  not allocate this fixed buffer.
 
+config PS3_VRAM
+	tristate "PS3 Video RAM Storage Driver"
+	depends on FB_PS3=y && BLOCK && m
+	help
+	  This driver allows you to use excess PS3 video RAM as volatile
+	  storage or system swap.
+
 config PS3_LPM
 	tristate "PS3 Logical Performance Monitor support"
 	depends on PPC_PS3
diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h
index 7839767d837..da01432e8f4 100644
--- a/arch/s390/include/asm/mman.h
+++ b/arch/s390/include/asm/mman.h
@@ -22,4 +22,9 @@
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
 
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__) && defined(CONFIG_64BIT)
+int s390_mmap_check(unsigned long addr, unsigned long len);
+#define arch_mmap_check(addr,len,flags)	s390_mmap_check(addr,len)
+#endif
+
 #endif /* __S390_MMAN_H__ */
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 066b99502e0..db4523fe38a 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -61,7 +61,7 @@ extern void print_cpu_info(struct cpuinfo_S390 *);
 extern int get_cpu_capability(unsigned int *);
 
 /*
- * User space process size: 2GB for 31 bit, 4TB for 64 bit.
+ * User space process size: 2GB for 31 bit, 4TB or 8PT for 64 bit.
  */
 #ifndef __s390x__
 
@@ -70,8 +70,7 @@ extern int get_cpu_capability(unsigned int *);
 
 #else /* __s390x__ */
 
-#define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk,TIF_31BIT) ? \
-					(1UL << 31) : (1UL << 53))
+#define TASK_SIZE_OF(tsk)	((tsk)->mm->context.asce_limit)
 #define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_31BIT) ? \
 					(1UL << 30) : (1UL << 41))
 #define TASK_SIZE		TASK_SIZE_OF(current)
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index c93eb50e1d0..c979c3b56ab 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -30,6 +30,8 @@ static inline void s390_init_cpu_topology(void)
 };
 #endif
 
+#define SD_MC_INIT SD_CPU_INIT
+
 #include <asm-generic/topology.h>
 
 #endif /* _ASM_S390_TOPOLOGY_H */
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 397d131a345..80641224a09 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -5,6 +5,8 @@
  *
  */
 
+#include <asm/asm-offsets.h>
+
 #ifndef CONFIG_64BIT
 .globl _mcount
 _mcount:
@@ -14,7 +16,7 @@ _mcount:
 	ahi	%r15,-96
 	l	%r3,100(%r15)
 	la	%r2,0(%r14)
-	st	%r1,0(%r15)
+	st	%r1,__SF_BACKCHAIN(%r15)
 	la	%r3,0(%r3)
 	bras	%r14,0f
 	.long	ftrace_trace_function
@@ -38,7 +40,7 @@ _mcount:
 	stg	%r14,112(%r15)
 	lgr	%r1,%r15
 	aghi	%r15,-160
-	stg	%r1,0(%r15)
+	stg	%r1,__SF_BACKCHAIN(%r15)
 	lgr	%r2,%r14
 	lg	%r3,168(%r15)
 	larl	%r14,ftrace_trace_function
diff --git a/arch/s390/lib/div64.c b/arch/s390/lib/div64.c
index a5f8300bf3e..d9e62c0b576 100644
--- a/arch/s390/lib/div64.c
+++ b/arch/s390/lib/div64.c
@@ -61,7 +61,7 @@ static uint32_t __div64_31(uint64_t *n, uint32_t base)
 		"	clr	%0,%3\n"
 		"	jl	0f\n"
 		"	slr	%0,%3\n"
-		"	alr	%1,%2\n"
+		"	ahi	%1,1\n"
 		"0:\n"
 		: "+d" (reg2), "+d" (reg3), "=d" (tmp)
 		: "d" (base), "2" (1UL) : "cc" );
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index d66215b0fde..b0b84c35b0a 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -119,8 +119,6 @@ retry:
 			goto fault;
 
 		pfn = pte_pfn(*pte);
-		if (!pfn_valid(pfn))
-			goto out;
 
 		offset = uaddr & (PAGE_SIZE - 1);
 		size = min(n - done, PAGE_SIZE - offset);
@@ -135,7 +133,6 @@ retry:
 		done += size;
 		uaddr += size;
 	} while (done < n);
-out:
 	spin_unlock(&mm->page_table_lock);
 	return n - done;
 fault:
@@ -163,9 +160,6 @@ retry:
 		goto fault;
 
 	pfn = pte_pfn(*pte);
-	if (!pfn_valid(pfn))
-		goto out;
-
 	ret = (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
 out:
 	return ret;
@@ -244,11 +238,6 @@ retry:
 			goto fault;
 
 		pfn = pte_pfn(*pte);
-		if (!pfn_valid(pfn)) {
-			done = -1;
-			goto out;
-		}
-
 		offset = uaddr & (PAGE_SIZE-1);
 		addr = (char *)(pfn << PAGE_SHIFT) + offset;
 		len = min(count - done, PAGE_SIZE - offset);
@@ -256,7 +245,6 @@ retry:
 		done += len_str;
 		uaddr += len_str;
 	} while ((len_str == len) && (done < count));
-out:
 	spin_unlock(&mm->page_table_lock);
 	return done + 1;
 fault:
@@ -325,12 +313,7 @@ retry:
 		}
 
 		pfn_from = pte_pfn(*pte_from);
-		if (!pfn_valid(pfn_from))
-			goto out;
 		pfn_to = pte_pfn(*pte_to);
-		if (!pfn_valid(pfn_to))
-			goto out;
-
 		offset_from = uaddr_from & (PAGE_SIZE-1);
 		offset_to = uaddr_from & (PAGE_SIZE-1);
 		offset_max = max(offset_from, offset_to);
@@ -342,7 +325,6 @@ retry:
 		uaddr_from += size;
 		uaddr_to += size;
 	} while (done < n);
-out:
 	spin_unlock(&mm->page_table_lock);
 	return n - done;
 fault:
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index 5932a824547..e008d236cc1 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -35,7 +35,7 @@
  * Leave an at least ~128 MB hole.
  */
 #define MIN_GAP (128*1024*1024)
-#define MAX_GAP (TASK_SIZE/6*5)
+#define MAX_GAP (STACK_TOP/6*5)
 
 static inline unsigned long mmap_base(void)
 {
@@ -46,7 +46,7 @@ static inline unsigned long mmap_base(void)
 	else if (gap > MAX_GAP)
 		gap = MAX_GAP;
 
-	return TASK_SIZE - (gap & PAGE_MASK);
+	return STACK_TOP - (gap & PAGE_MASK);
 }
 
 static inline int mmap_is_legacy(void)
@@ -89,42 +89,58 @@ EXPORT_SYMBOL_GPL(arch_pick_mmap_layout);
 
 #else
 
+int s390_mmap_check(unsigned long addr, unsigned long len)
+{
+	if (!test_thread_flag(TIF_31BIT) &&
+	    len >= TASK_SIZE && TASK_SIZE < (1UL << 53))
+		return crst_table_upgrade(current->mm, 1UL << 53);
+	return 0;
+}
+
 static unsigned long
 s390_get_unmapped_area(struct file *filp, unsigned long addr,
 		unsigned long len, unsigned long pgoff, unsigned long flags)
 {
 	struct mm_struct *mm = current->mm;
+	unsigned long area;
 	int rc;
 
-	addr = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
-	if (addr & ~PAGE_MASK)
-		return addr;
-	if (unlikely(mm->context.asce_limit < addr + len)) {
-		rc = crst_table_upgrade(mm, addr + len);
+	area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
+	if (!(area & ~PAGE_MASK))
+		return area;
+	if (area == -ENOMEM &&
+	    !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+		/* Upgrade the page table to 4 levels and retry. */
+		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
 			return (unsigned long) rc;
+		area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
 	}
-	return addr;
+	return area;
 }
 
 static unsigned long
-s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr,
 			  const unsigned long len, const unsigned long pgoff,
 			  const unsigned long flags)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long addr = addr0;
+	unsigned long area;
 	int rc;
 
-	addr = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
-	if (addr & ~PAGE_MASK)
-		return addr;
-	if (unlikely(mm->context.asce_limit < addr + len)) {
-		rc = crst_table_upgrade(mm, addr + len);
+	area = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
+	if (!(area & ~PAGE_MASK))
+		return area;
+	if (area == -ENOMEM &&
+	    !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+		/* Upgrade the page table to 4 levels and retry. */
+		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
 			return (unsigned long) rc;
+		area = arch_get_unmapped_area_topdown(filp, addr, len,
+						      pgoff, flags);
 	}
-	return addr;
+	return area;
 }
 /*
  * This function, called very early during the creation of a new
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 0767827540b..6b6ddc4ea02 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -117,6 +117,7 @@ repeat:
 		crst_table_init(table, entry);
 		pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
 		mm->pgd = (pgd_t *) table;
+		mm->task_size = mm->context.asce_limit;
 		table = NULL;
 	}
 	spin_unlock(&mm->page_table_lock);
@@ -154,6 +155,7 @@ void crst_table_downgrade(struct mm_struct *mm, unsigned long limit)
 			BUG();
 		}
 		mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
+		mm->task_size = mm->context.asce_limit;
 		crst_table_free(mm, (unsigned long *) pgd);
 	}
 	update_mm(mm, current);
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 72da416f616..15b6d450fbf 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
+#include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h
index 32a7efe76d0..26693703054 100644
--- a/arch/sparc/include/asm/pil.h
+++ b/arch/sparc/include/asm/pil.h
@@ -24,6 +24,7 @@
 #define PIL_DEVICE_IRQ		5
 #define PIL_SMP_CALL_FUNC_SNGL	6
 #define PIL_DEFERRED_PCR_WORK	7
+#define PIL_KGDB_CAPTURE	8
 #define PIL_NORMAL_MAX		14
 #define PIL_NMI			15
 
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index e289376198e..1c378d8e90c 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -323,17 +323,25 @@ static void sun4u_set_affinity(unsigned int virt_irq,
 	sun4u_irq_enable(virt_irq);
 }
 
+/* Don't do anything.  The desc->status check for IRQ_DISABLED in
+ * handler_irq() will skip the handler call and that will leave the
+ * interrupt in the sent state.  The next ->enable() call will hit the
+ * ICLR register to reset the state machine.
+ *
+ * This scheme is necessary, instead of clearing the Valid bit in the
+ * IMAP register, to handle the case of IMAP registers being shared by
+ * multiple INOs (and thus ICLR registers).  Since we use a different
+ * virtual IRQ for each shared IMAP instance, the generic code thinks
+ * there is only one user so it prematurely calls ->disable() on
+ * free_irq().
+ *
+ * We have to provide an explicit ->disable() method instead of using
+ * NULL to get the default.  The reason is that if the generic code
+ * sees that, it also hooks up a default ->shutdown method which
+ * invokes ->mask() which we do not want.  See irq_chip_set_defaults().
+ */
 static void sun4u_irq_disable(unsigned int virt_irq)
 {
-	struct irq_handler_data *data = get_irq_chip_data(virt_irq);
-
-	if (likely(data)) {
-		unsigned long imap = data->imap;
-		unsigned long tmp = upa_readq(imap);
-
-		tmp &= ~IMAP_VALID;
-		upa_writeq(tmp, imap);
-	}
 }
 
 static void sun4u_irq_eoi(unsigned int virt_irq)
@@ -746,7 +754,8 @@ void handler_irq(int irq, struct pt_regs *regs)
 
 		desc = irq_desc + virt_irq;
 
-		desc->handle_irq(virt_irq, desc);
+		if (!(desc->status & IRQ_DISABLED))
+			desc->handle_irq(virt_irq, desc);
 
 		bucket_pa = next_pa;
 	}
diff --git a/arch/sparc/kernel/kgdb_64.c b/arch/sparc/kernel/kgdb_64.c
index fefbe6dc51b..f5a0fd490b5 100644
--- a/arch/sparc/kernel/kgdb_64.c
+++ b/arch/sparc/kernel/kgdb_64.c
@@ -108,7 +108,7 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_SMP
-void smp_kgdb_capture_client(struct pt_regs *regs)
+void smp_kgdb_capture_client(int irq, struct pt_regs *regs)
 {
 	unsigned long flags;
 
diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c
index 64e6edf17b9..b775658a927 100644
--- a/arch/sparc/kernel/pci_common.c
+++ b/arch/sparc/kernel/pci_common.c
@@ -368,7 +368,7 @@ static void pci_register_iommu_region(struct pci_pbm_info *pbm)
 	const u32 *vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
 
 	if (vdma) {
-		struct resource *rp = kmalloc(sizeof(*rp), GFP_KERNEL);
+		struct resource *rp = kzalloc(sizeof(*rp), GFP_KERNEL);
 
 		if (!rp) {
 			prom_printf("Cannot allocate IOMMU resource.\n");
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index d9bdfb9d5c1..76d837fc47d 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -64,7 +64,12 @@ tl0_irq6:	TRAP_IRQ(smp_call_function_single_client, 6)
 tl0_irq6:	BTRAP(0x46)
 #endif
 tl0_irq7:	TRAP_IRQ(deferred_pcr_work_irq, 7)
-tl0_irq8:	BTRAP(0x48) BTRAP(0x49)
+#ifdef CONFIG_KGDB
+tl0_irq8:	TRAP_IRQ(smp_kgdb_capture_client, 8)
+#else
+tl0_irq8:	BTRAP(0x48)
+#endif
+tl0_irq9:	BTRAP(0x49)
 tl0_irq10:	BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
 tl0_irq14:	TRAP_IRQ(timer_interrupt, 14)
 tl0_irq15:	TRAP_NMI_IRQ(perfctr_irq, 15)
diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S
index 80c788ec7c3..b57a5942ba6 100644
--- a/arch/sparc/mm/ultra.S
+++ b/arch/sparc/mm/ultra.S
@@ -679,28 +679,8 @@ xcall_new_mmu_context_version:
 #ifdef CONFIG_KGDB
 	.globl		xcall_kgdb_capture
 xcall_kgdb_capture:
-661:	rdpr		%pstate, %g2
-	wrpr		%g2, PSTATE_IG | PSTATE_AG, %pstate
-	.section	.sun4v_2insn_patch, "ax"
-	.word		661b
-	nop
-	nop
-	.previous
-
-	rdpr		%pil, %g2
-	wrpr		%g0, PIL_NORMAL_MAX, %pil
-	sethi		%hi(109f), %g7
-	ba,pt		%xcc, etrap_irq
-109:	 or		%g7, %lo(109b), %g7
-#ifdef CONFIG_TRACE_IRQFLAGS
-	call		trace_hardirqs_off
-	 nop
-#endif
-	call		smp_kgdb_capture_client
-	 add		%sp, PTREGS_OFF, %o0
-	/* Has to be a non-v9 branch due to the large distance. */
-	ba		rtrap_xcall
-	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
+	wr		%g0, (1 << PIL_KGDB_CAPTURE), %set_softint
+	retry
 #endif
 
 #endif /* CONFIG_SMP */
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 15e8b7c4de1..8e3d69e4fcb 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -64,6 +64,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = poke_user(child, addr, data);
 		break;
 
+	case PTRACE_SYSEMU:
+	case PTRACE_SYSEMU_SINGLESTEP:
+		ret = -EIO;
+		break;
+
 	/* continue and stop at next (return from) syscall */
 	case PTRACE_SYSCALL:
 	/* restart after signal. */
diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
index 74f49bb9b12..89b48a116a8 100644
--- a/arch/um/os-Linux/user_syms.c
+++ b/arch/um/os-Linux/user_syms.c
@@ -14,7 +14,6 @@
 #undef memset
 
 extern size_t strlen(const char *);
-extern void *memcpy(void *, const void *, size_t);
 extern void *memmove(void *, const void *, size_t);
 extern void *memset(void *, int, size_t);
 extern int printf(const char *, ...);
@@ -24,7 +23,11 @@ extern int printf(const char *, ...);
 EXPORT_SYMBOL(strstr);
 #endif
 
+#ifndef __x86_64__
+extern void *memcpy(void *, const void *, size_t);
 EXPORT_SYMBOL(memcpy);
+#endif
+
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(printf);
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index ca5ffb2856b..edc90f23e70 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -37,8 +37,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...);
 
 #else /* !CONFIG_X86_32 */
 
-#define MAX_EFI_IO_PAGES	100
-
 extern u64 efi_call0(void *fp);
 extern u64 efi_call1(void *fp, u64 arg1);
 extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index 00a30ab9b1a..8be740977db 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -16,7 +16,6 @@
 #include <asm/apicdef.h>
 #include <asm/page.h>
 #include <asm/vsyscall.h>
-#include <asm/efi.h>
 
 /*
  * Here we define all the compile-time 'special' virtual
@@ -43,9 +42,6 @@ enum fixed_addresses {
 	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
-	FIX_EFI_IO_MAP_LAST_PAGE,
-	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
-				  + MAX_EFI_IO_PAGES - 1,
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 48f0004db8c..71c9e518398 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -172,7 +172,13 @@ static inline void __save_init_fpu(struct task_struct *tsk)
 
 #else  /* CONFIG_X86_32 */
 
-extern void finit(void);
+#ifdef CONFIG_MATH_EMULATION
+extern void finit_task(struct task_struct *tsk);
+#else
+static inline void finit_task(struct task_struct *tsk)
+{
+}
+#endif
 
 static inline void tolerant_fwait(void)
 {
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index b585e04cbc9..3178c3acd97 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -277,7 +277,6 @@ static struct cpufreq_driver p4clockmod_driver = {
 	.name		= "p4-clockmod",
 	.owner		= THIS_MODULE,
 	.attr		= p4clockmod_attr,
-	.hide_interface	= 1,
 };
 
 
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 169a120587b..87b67e3a765 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -729,7 +729,7 @@ struct pebs_tracer *ds_request_pebs(struct task_struct *task,
 
 	spin_unlock_irqrestore(&ds_lock, irq);
 
-	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
 	ds_resume_pebs(tracer);
 
 	return tracer;
@@ -1029,5 +1029,4 @@ void ds_copy_thread(struct task_struct *tsk, struct task_struct *father)
 
 void ds_exit_thread(struct task_struct *tsk)
 {
-	WARN_ON(tsk->thread.ds_ctx);
 }
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 1119d247fe1..eb1ef3b67dd 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -467,7 +467,7 @@ void __init efi_enter_virtual_mode(void)
 	efi_memory_desc_t *md;
 	efi_status_t status;
 	unsigned long size;
-	u64 end, systab, addr, npages;
+	u64 end, systab, addr, npages, end_pfn;
 	void *p, *va;
 
 	efi.systab = NULL;
@@ -479,7 +479,10 @@ void __init efi_enter_virtual_mode(void)
 		size = md->num_pages << EFI_PAGE_SHIFT;
 		end = md->phys_addr + size;
 
-		if (PFN_UP(end) <= max_low_pfn_mapped)
+		end_pfn = PFN_UP(end);
+		if (end_pfn <= max_low_pfn_mapped
+		    || (end_pfn > (1UL << (32 - PAGE_SHIFT))
+			&& end_pfn <= max_pfn_mapped))
 			va = __va(md->phys_addr);
 		else
 			va = efi_ioremap(md->phys_addr, size);
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 652c5287215..cb783b92c50 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -99,24 +99,11 @@ void __init efi_call_phys_epilog(void)
 
 void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
 {
-	static unsigned pages_mapped __initdata;
-	unsigned i, pages;
-	unsigned long offset;
+	unsigned long last_map_pfn;
 
-	pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr);
-	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PAGE_MASK;
-
-	if (pages_mapped + pages > MAX_EFI_IO_PAGES)
+	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
 		return NULL;
 
-	for (i = 0; i < pages; i++) {
-		__set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped,
-			     phys_addr, PAGE_KERNEL);
-		phys_addr += PAGE_SIZE;
-		pages_mapped++;
-	}
-
-	return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \
-					     (pages_mapped - pages)) + offset;
+	return (void __iomem *)__va(phys_addr);
 }
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index b0f61f0dcd0..f2f8540a7f3 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -136,7 +136,7 @@ int init_fpu(struct task_struct *tsk)
 #ifdef CONFIG_X86_32
 	if (!HAVE_HWFP) {
 		memset(tsk->thread.xstate, 0, xstate_size);
-		finit();
+		finit_task(tsk);
 		set_stopped_child_used_math(tsk);
 		return 0;
 	}
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index e948b28a5a9..4558dd3918c 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -193,6 +193,9 @@ static int __kprobes can_boost(kprobe_opcode_t *opcodes)
 	kprobe_opcode_t opcode;
 	kprobe_opcode_t *orig_opcodes = opcodes;
 
+	if (search_exception_tables(opcodes))
+		return 0;	/* Page fault may occur on this address. */
+
 retry:
 	if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
 		return 0;
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2b46eb41643..4526b3a75ed 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -217,6 +217,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell XPS710 */
+		.callback = set_bios_reboot,
+		.ident = "Dell XPS710",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c461f6d6907..6a8811a6932 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -770,6 +770,9 @@ void __init setup_arch(char **cmdline_p)
 
 	finish_e820_parsing();
 
+	if (efi_enabled)
+		efi_init();
+
 	dmi_scan_machine();
 
 	dmi_check_system(bad_bios_dmi_table);
@@ -789,8 +792,6 @@ void __init setup_arch(char **cmdline_p)
 	insert_resource(&iomem_resource, &data_resource);
 	insert_resource(&iomem_resource, &bss_resource);
 
-	if (efi_enabled)
-		efi_init();
 
 #ifdef CONFIG_X86_32
 	if (ppro_with_ram_bug()) {
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 599e5816863..d5cebb52d45 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -273,30 +273,43 @@ static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
  * use the TSC value at the transitions to calculate a pretty
  * good value for the TSC frequencty.
  */
-static inline int pit_expect_msb(unsigned char val)
+static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
 {
-	int count = 0;
+	int count;
+	u64 tsc = 0;
 
 	for (count = 0; count < 50000; count++) {
 		/* Ignore LSB */
 		inb(0x42);
 		if (inb(0x42) != val)
 			break;
+		tsc = get_cycles();
 	}
-	return count > 50;
+	*deltap = get_cycles() - tsc;
+	*tscp = tsc;
+
+	/*
+	 * We require _some_ success, but the quality control
+	 * will be based on the error terms on the TSC values.
+	 */
+	return count > 5;
 }
 
 /*
- * How many MSB values do we want to see? We aim for a
- * 15ms calibration, which assuming a 2us counter read
- * error should give us roughly 150 ppm precision for
- * the calibration.
+ * How many MSB values do we want to see? We aim for
+ * a maximum error rate of 500ppm (in practice the
+ * real error is much smaller), but refuse to spend
+ * more than 25ms on it.
  */
-#define QUICK_PIT_MS 15
-#define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
+#define MAX_QUICK_PIT_MS 25
+#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
 
 static unsigned long quick_pit_calibrate(void)
 {
+	int i;
+	u64 tsc, delta;
+	unsigned long d1, d2;
+
 	/* Set the Gate high, disable speaker */
 	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
 
@@ -315,45 +328,52 @@ static unsigned long quick_pit_calibrate(void)
 	outb(0xff, 0x42);
 	outb(0xff, 0x42);
 
-	if (pit_expect_msb(0xff)) {
-		int i;
-		u64 t1, t2, delta;
-		unsigned char expect = 0xfe;
-
-		t1 = get_cycles();
-		for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) {
-			if (!pit_expect_msb(expect))
-				goto failed;
+	/*
+	 * The PIT starts counting at the next edge, so we
+	 * need to delay for a microsecond. The easiest way
+	 * to do that is to just read back the 16-bit counter
+	 * once from the PIT.
+	 */
+	inb(0x42);
+	inb(0x42);
+
+	if (pit_expect_msb(0xff, &tsc, &d1)) {
+		for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
+			if (!pit_expect_msb(0xff-i, &delta, &d2))
+				break;
+
+			/*
+			 * Iterate until the error is less than 500 ppm
+			 */
+			delta -= tsc;
+			if (d1+d2 < delta >> 11)
+				goto success;
 		}
-		t2 = get_cycles();
-
-		/*
-		 * Make sure we can rely on the second TSC timestamp:
-		 */
-		if (!pit_expect_msb(expect))
-			goto failed;
-
-		/*
-		 * Ok, if we get here, then we've seen the
-		 * MSB of the PIT decrement QUICK_PIT_ITERATIONS
-		 * times, and each MSB had many hits, so we never
-		 * had any sudden jumps.
-		 *
-		 * As a result, we can depend on there not being
-		 * any odd delays anywhere, and the TSC reads are
-		 * reliable.
-		 *
-		 * kHz = ticks / time-in-seconds / 1000;
-		 * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000
-		 * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000)
-		 */
-		delta = (t2 - t1)*PIT_TICK_RATE;
-		do_div(delta, QUICK_PIT_ITERATIONS*256*1000);
-		printk("Fast TSC calibration using PIT\n");
-		return delta;
 	}
-failed:
+	printk("Fast TSC calibration failed\n");
 	return 0;
+
+success:
+	/*
+	 * Ok, if we get here, then we've seen the
+	 * MSB of the PIT decrement 'i' times, and the
+	 * error has shrunk to less than 500 ppm.
+	 *
+	 * As a result, we can depend on there not being
+	 * any odd delays anywhere, and the TSC reads are
+	 * reliable (within the error). We also adjust the
+	 * delta to the middle of the error bars, just
+	 * because it looks nicer.
+	 *
+	 * kHz = ticks / time-in-seconds / 1000;
+	 * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
+	 * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
+	 */
+	delta += (long)(d2 - d1)/2;
+	delta *= PIT_TICK_RATE;
+	do_div(delta, i*256*1000);
+	printk("Fast TSC calibration using PIT\n");
+	return delta;
 }
 
 /**
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 92f1c6f3e19..960a8d9c049 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -343,6 +343,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 		 * flush_tlb_user() for both user and kernel mappings unless
 		 * the Page Global Enable (PGE) feature bit is set. */
 		*dx |= 0x00002000;
+		/* We also lie, and say we're family id 5.  6 or greater
+		 * leads to a rdmsr in early_init_intel which we can't handle.
+		 * Family ID is returned as bits 8-12 in ax. */
+		*ax &= 0xFFFFF0FF;
+		*ax |= 0x00000500;
 		break;
 	case 0x80000000:
 		/* Futureproof this a little: if they ask how much extended
@@ -589,19 +594,21 @@ static void __init lguest_init_IRQ(void)
 		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
 		 * a straightforward 1 to 1 mapping, so force that here. */
 		__get_cpu_var(vector_irq)[vector] = i;
-		if (vector != SYSCALL_VECTOR) {
-			set_intr_gate(vector,
-				      interrupt[vector-FIRST_EXTERNAL_VECTOR]);
-			set_irq_chip_and_handler_name(i, &lguest_irq_controller,
-						      handle_level_irq,
-						      "level");
-		}
+		if (vector != SYSCALL_VECTOR)
+			set_intr_gate(vector, interrupt[i]);
 	}
 	/* This call is required to set up for 4k stacks, where we have
 	 * separate stacks for hard and soft interrupts. */
 	irq_ctx_init(smp_processor_id());
 }
 
+void lguest_setup_irq(unsigned int irq)
+{
+	irq_to_desc_alloc_cpu(irq, 0);
+	set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
+				      handle_level_irq, "level");
+}
+
 /*
  * Time.
  *
diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c
index 491e737ce54..aa098708877 100644
--- a/arch/x86/math-emu/fpu_aux.c
+++ b/arch/x86/math-emu/fpu_aux.c
@@ -30,20 +30,29 @@ static void fclex(void)
 }
 
 /* Needs to be externally visible */
-void finit(void)
+void finit_task(struct task_struct *tsk)
 {
-	control_word = 0x037f;
-	partial_status = 0;
-	top = 0;		/* We don't keep top in the status word internally. */
-	fpu_tag_word = 0xffff;
+	struct i387_soft_struct *soft = &tsk->thread.xstate->soft;
+	struct address *oaddr, *iaddr;
+	soft->cwd = 0x037f;
+	soft->swd = 0;
+	soft->ftop = 0;	/* We don't keep top in the status word internally. */
+	soft->twd = 0xffff;
 	/* The behaviour is different from that detailed in
 	   Section 15.1.6 of the Intel manual */
-	operand_address.offset = 0;
-	operand_address.selector = 0;
-	instruction_address.offset = 0;
-	instruction_address.selector = 0;
-	instruction_address.opcode = 0;
-	no_ip_update = 1;
+	oaddr = (struct address *)&soft->foo;
+	oaddr->offset = 0;
+	oaddr->selector = 0;
+	iaddr = (struct address *)&soft->fip;
+	iaddr->offset = 0;
+	iaddr->selector = 0;
+	iaddr->opcode = 0;
+	soft->no_update = 1;
+}
+
+void finit(void)
+{
+	finit_task(current);
 }
 
 /*
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 9f205030d9a..6a518dd08a3 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -451,23 +451,24 @@ static void rcu_free_kmmio_fault_pages(struct rcu_head *head)
 
 static void remove_kmmio_fault_pages(struct rcu_head *head)
 {
-	struct kmmio_delayed_release *dr = container_of(
-						head,
-						struct kmmio_delayed_release,
-						rcu);
+	struct kmmio_delayed_release *dr =
+		container_of(head, struct kmmio_delayed_release, rcu);
 	struct kmmio_fault_page *p = dr->release_list;
 	struct kmmio_fault_page **prevp = &dr->release_list;
 	unsigned long flags;
+
 	spin_lock_irqsave(&kmmio_lock, flags);
 	while (p) {
-		if (!p->count)
+		if (!p->count) {
 			list_del_rcu(&p->list);
-		else
+			prevp = &p->release_next;
+		} else {
 			*prevp = p->release_next;
-		prevp = &p->release_next;
+		}
 		p = p->release_next;
 	}
 	spin_unlock_irqrestore(&kmmio_lock, flags);
+
 	/* This is the real RCU destroy call. */
 	call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
 }
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7be47d1a97e..7233bd7e357 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -515,6 +515,17 @@ static int split_large_page(pte_t *kpte, unsigned long address)
 	 * primary protection behavior:
 	 */
 	__set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
+
+	/*
+	 * Intel Atom errata AAH41 workaround.
+	 *
+	 * The real fix should be in hw or in a microcode update, but
+	 * we also probabilistically try to reduce the window of having
+	 * a large TLB mixed with 4K TLBs while instruction fetches are
+	 * going on.
+	 */
+	__flush_tlb_all();
+
 	base = NULL;
 
 out_unlock:
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 6c873dceb17..98120083043 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -103,9 +103,6 @@ config MATH_EMULATION
 	help
 	Can we use information of configuration file?
 
-config HIGHMEM
-	bool "High memory support"
-
 endmenu
 
 menu "Platform options"
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 9606d2bd1dd..4ec1633c294 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -44,6 +44,8 @@
 #include <asm/setup.h>
 #include <asm/param.h>
 
+#include <platform/hardware.h>
+
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
 #endif
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index c7a021d9f69..c44f830b6c7 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/stringify.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 
 #include <asm/ptrace.h>
 #include <asm/timex.h>
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index 33f366be323..bdd860d93f7 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -14,6 +14,7 @@
 
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/hardirq.h>
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index efed8897bef..25d46c84eb0 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -140,16 +140,14 @@ static void rs_poll(unsigned long priv)
 }
 
 
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	char buf[2];
 
-	if (!tty)
-		return;
-
 	buf[0] = ch;
 	buf[1] = '\0';		/* Is this NULL necessary? */
 	__simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+	return 1;
 }
 
 static void rs_flush_chars(struct tty_struct *tty)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index a104593e70c..5a244f05360 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -39,14 +39,13 @@ void blk_recalc_rq_sectors(struct request *rq, int nsect)
 }
 
 static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
-					     struct bio *bio,
-					     unsigned int *seg_size_ptr)
+					     struct bio *bio)
 {
 	unsigned int phys_size;
 	struct bio_vec *bv, *bvprv = NULL;
 	int cluster, i, high, highprv = 1;
 	unsigned int seg_size, nr_phys_segs;
-	struct bio *fbio;
+	struct bio *fbio, *bbio;
 
 	if (!bio)
 		return 0;
@@ -87,26 +86,20 @@ new_segment:
 			seg_size = bv->bv_len;
 			highprv = high;
 		}
+		bbio = bio;
 	}
 
-	if (seg_size_ptr)
-		*seg_size_ptr = seg_size;
+	if (nr_phys_segs == 1 && seg_size > fbio->bi_seg_front_size)
+		fbio->bi_seg_front_size = seg_size;
+	if (seg_size > bbio->bi_seg_back_size)
+		bbio->bi_seg_back_size = seg_size;
 
 	return nr_phys_segs;
 }
 
 void blk_recalc_rq_segments(struct request *rq)
 {
-	unsigned int seg_size = 0, phys_segs;
-
-	phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size);
-
-	if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
-		rq->bio->bi_seg_front_size = seg_size;
-	if (seg_size > rq->biotail->bi_seg_back_size)
-		rq->biotail->bi_seg_back_size = seg_size;
-
-	rq->nr_phys_segments = phys_segs;
+	rq->nr_phys_segments = __blk_recalc_rq_segments(rq->q, rq->bio);
 }
 
 void blk_recount_segments(struct request_queue *q, struct bio *bio)
@@ -114,7 +107,7 @@ void blk_recount_segments(struct request_queue *q, struct bio *bio)
 	struct bio *nxt = bio->bi_next;
 
 	bio->bi_next = NULL;
-	bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL);
+	bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio);
 	bio->bi_next = nxt;
 	bio->bi_flags |= (1 << BIO_SEG_VALID);
 }
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 765fd1c56cd..bee64b73c91 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -758,8 +758,7 @@ static int __init acpi_bus_init(void)
 	acpi_status status = AE_OK;
 	extern acpi_status acpi_os_initialize1(void);
 
-
-	status = acpi_os_initialize1();
+	acpi_os_initialize1();
 
 	status =
 	    acpi_enable_subsystem(ACPI_NO_HARDWARE_INIT | ACPI_NO_ACPI_ENABLE);
@@ -769,12 +768,6 @@ static int __init acpi_bus_init(void)
 		goto error1;
 	}
 
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX
-		       "Unable to initialize ACPI OS objects\n");
-		goto error1;
-	}
-
 	/*
 	 * ACPI 2.0 requires the EC driver to be loaded and work before
 	 * the EC device is found in the namespace (i.e. before acpi_initialize_objects()
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index c5e292aab0e..3a0d8ef25c7 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -277,7 +277,7 @@ int acpi_get_node(acpi_handle *handle)
 	int pxm, node = -1;
 
 	pxm = acpi_get_pxm(handle);
-	if (pxm >= 0)
+	if (pxm >= 0 && pxm < MAX_PXM_DOMAINS)
 		node = acpi_map_pxm_to_node(pxm);
 
 	return node;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index b3193ec0a2e..1e35f342957 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1317,54 +1317,6 @@ acpi_os_validate_interface (char *interface)
 	return AE_SUPPORT;
 }
 
-#ifdef	CONFIG_X86
-
-struct aml_port_desc {
-	uint	start;
-	uint	end;
-	char*   name;
-	char	warned;
-};
-
-static struct aml_port_desc aml_invalid_port_list[] = {
-	{0x20, 0x21, "PIC0", 0},
-	{0xA0, 0xA1, "PIC1", 0},
-	{0x4D0, 0x4D1, "ELCR", 0}
-};
-
-/*
- * valid_aml_io_address()
- *
- * if valid, return true
- * else invalid, warn once, return false
- */
-static bool valid_aml_io_address(uint address, uint length)
-{
-	int i;
-	int entries = sizeof(aml_invalid_port_list) / sizeof(struct aml_port_desc);
-
-	for (i = 0; i < entries; ++i) {
-		if ((address >= aml_invalid_port_list[i].start &&
-			address <= aml_invalid_port_list[i].end) ||
-			(address + length >= aml_invalid_port_list[i].start &&
-			address  + length <= aml_invalid_port_list[i].end))
-		{
-			if (!aml_invalid_port_list[i].warned)
-			{
-				printk(KERN_ERR "ACPI: Denied BIOS AML access"
-					" to invalid port 0x%x+0x%x (%s)\n",
-					address, length,
-					aml_invalid_port_list[i].name);
-				aml_invalid_port_list[i].warned = 1;
-			}
-			return false;	/* invalid */
-		}
-	}
-	return true;	/* valid */
-}
-#else
-static inline bool valid_aml_io_address(uint address, uint length) { return true; }
-#endif
 /******************************************************************************
  *
  * FUNCTION:    acpi_os_validate_address
@@ -1394,8 +1346,6 @@ acpi_os_validate_address (
 
 	switch (space_id) {
 	case ACPI_ADR_SPACE_SYSTEM_IO:
-		if (!valid_aml_io_address(address, length))
-			return AE_AML_ILLEGAL_ADDRESS;
 	case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 		/* Only interference checks against SystemIO and SytemMemory
 		   are needed */
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 519266654f0..00456fccfa3 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -378,6 +378,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
 		},
 	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
+		},
+	},
+	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Toshiba Satellite L300",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"),
+		},
+	},
 	{},
 };
 #endif /* CONFIG_SUSPEND */
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a603bbf9b1b..66e012cd327 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -582,18 +582,18 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci },		/* MCP79 */
 	{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci },		/* MCP79 */
 	{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci },		/* MCP79 */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
+	{ PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci },		/* MCP89 */
 
 	/* SiS */
 	{ PCI_VDEVICE(SI, 0x1184), board_ahci },		/* SiS 966 */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 54961c0b2c7..ef8b30d577b 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1289,6 +1289,39 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
 	return map;
 }
 
+static bool piix_no_sidpr(struct ata_host *host)
+{
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+
+	/*
+	 * Samsung DB-P70 only has three ATA ports exposed and
+	 * curiously the unconnected first port reports link online
+	 * while not responding to SRST protocol causing excessive
+	 * detection delay.
+	 *
+	 * Unfortunately, the system doesn't carry enough DMI
+	 * information to identify the machine but does have subsystem
+	 * vendor and device set.  As it's unclear whether the
+	 * subsystem vendor/device is used only for this specific
+	 * board, the port can't be disabled solely with the
+	 * information; however, turning off SIDPR access works around
+	 * the problem.  Turn it off.
+	 *
+	 * This problem is reported in bnc#441240.
+	 *
+	 * https://bugzilla.novell.com/show_bug.cgi?id=441420
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+	    pdev->subsystem_device == 0xb049) {
+		dev_printk(KERN_WARNING, host->dev,
+			   "Samsung DB-P70 detected, disabling SIDPR\n");
+		return true;
+	}
+
+	return false;
+}
+
 static int __devinit piix_init_sidpr(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -1302,6 +1335,10 @@ static int __devinit piix_init_sidpr(struct ata_host *host)
 		if (hpriv->map[i] == IDE)
 			return 0;
 
+	/* is it blacklisted? */
+	if (piix_no_sidpr(host))
+		return 0;
+
 	if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
 		return 0;
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9fbf0595f3d..060bcd601f5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1322,14 +1322,16 @@ static u64 ata_id_n_sectors(const u16 *id)
 {
 	if (ata_id_has_lba(id)) {
 		if (ata_id_has_lba48(id))
-			return ata_id_u64(id, 100);
+			return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
 		else
-			return ata_id_u32(id, 60);
+			return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
 	} else {
 		if (ata_id_current_chs_valid(id))
-			return ata_id_u32(id, 57);
+			return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+			       id[ATA_ID_CUR_SECTORS];
 		else
-			return id[1] * id[3] * id[6];
+			return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+			       id[ATA_ID_SECTORS];
 	}
 }
 
@@ -4612,7 +4614,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
 	VPRINTK("unmapping %u sg elements\n", qc->n_elem);
 
 	if (qc->n_elem)
-		dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+		dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
 
 	qc->flags &= ~ATA_QCFLAG_DMAMAP;
 	qc->sg = NULL;
@@ -4727,7 +4729,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
 		return -1;
 
 	DPRINTK("%d sg elements mapped\n", n_elem);
-
+	qc->orig_n_elem = qc->n_elem;
 	qc->n_elem = n_elem;
 	qc->flags |= ATA_QCFLAG_DMAMAP;
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ce2ef047533..ea890911d4f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2423,11 +2423,14 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		}
 
 		/* prereset() might have cleared ATA_EH_RESET.  If so,
-		 * bang classes and return.
+		 * bang classes, thaw and return.
 		 */
 		if (reset && !(ehc->i.action & ATA_EH_RESET)) {
 			ata_for_each_dev(dev, link, ALL)
 				classes[dev->devno] = ATA_DEV_NONE;
+			if ((ap->pflags & ATA_PFLAG_FROZEN) &&
+			    ata_is_host_link(link))
+				ata_eh_thaw_port(ap);
 			rc = 0;
 			goto out;
 		}
@@ -2901,7 +2904,7 @@ static int atapi_eh_clear_ua(struct ata_device *dev)
 	int i;
 
 	for (i = 0; i < ATA_EH_UA_TRIES; i++) {
-		u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
+		u8 *sense_buffer = dev->link->ap->sector_buf;
 		u8 sense_key = 0;
 		unsigned int err_mask;
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 714cb046b59..f93dc029dfd 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2066,6 +2066,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
 	udelay(20);	/* FIXME: flush */
 	iowrite8(ap->ctl, ioaddr->ctl_addr);
+	ap->last_ctl = ap->ctl;
 
 	/* wait the port to become ready */
 	return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
@@ -2190,8 +2191,10 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
 	}
 
 	/* set up device control */
-	if (ap->ioaddr.ctl_addr)
+	if (ap->ioaddr.ctl_addr) {
 		iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+		ap->last_ctl = ap->ctl;
+	}
 }
 EXPORT_SYMBOL_GPL(ata_sff_postreset);
 
@@ -2534,6 +2537,7 @@ void ata_bus_reset(struct ata_port *ap)
 	if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
 		/* set up device control for ATA_FLAG_SATA_RESET */
 		iowrite8(ap->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = ap->ctl;
 	}
 
 	DPRINTK("EXIT\n");
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index cf9e9848f8b..d7bc925c524 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -45,8 +45,6 @@ static const struct portinfo pata_icside_portinfo_v6_2 = {
 	.stepping	= 6,
 };
 
-#define PATA_ICSIDE_MAX_SG	128
-
 struct pata_icside_state {
 	void __iomem *irq_port;
 	void __iomem *ioc_base;
@@ -57,7 +55,6 @@ struct pata_icside_state {
 		u8 disabled;
 		unsigned int speed[ATA_MAX_DEVICES];
 	} port[2];
-	struct scatterlist sg[PATA_ICSIDE_MAX_SG];
 };
 
 struct pata_icside_info {
@@ -222,9 +219,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct pata_icside_state *state = ap->host->private_data;
-	struct scatterlist *sg, *rsg = state->sg;
 	unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE;
-	unsigned int si;
 
 	/*
 	 * We are simplex; BUG if we try to fiddle with DMA
@@ -233,20 +228,12 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
 	BUG_ON(dma_channel_active(state->dma));
 
 	/*
-	 * Copy ATAs scattered sg list into a contiguous array of sg
-	 */
-	for_each_sg(qc->sg, sg, qc->n_elem, si) {
-		memcpy(rsg, sg, sizeof(*sg));
-		rsg++;
-	}
-
-	/*
 	 * Route the DMA signals to the correct interface
 	 */
 	writeb(state->port[ap->port_no].port_sel, state->ioc_base);
 
 	set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]);
-	set_dma_sg(state->dma, state->sg, rsg - state->sg);
+	set_dma_sg(state->dma, qc->sg, qc->n_elem);
 	set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
 
 	/* issue r/w command */
@@ -306,8 +293,8 @@ static int icside_dma_init(struct pata_icside_info *info)
 
 static struct scsi_host_template pata_icside_sht = {
 	ATA_BASE_SHT(DRV_NAME),
-	.sg_tablesize		= PATA_ICSIDE_MAX_SG,
-	.dma_boundary		= ~0, /* no dma boundaries */
+	.sg_tablesize		= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.dma_boundary		= IOMD_DMA_BOUNDARY,
 };
 
 static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7007edd2d45..74b1080d116 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2218,12 +2218,13 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 		else
 			handled = mv_host_intr(host, pending_irqs);
 	}
-	spin_unlock(&host->lock);
 
 	/* for MSI: unmask; interrupt cause bits will retrigger now */
 	if (using_msi)
 		writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
 
+	spin_unlock(&host->lock);
+
 	return IRQ_RETVAL(handled);
 }
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 55a8eed3f3a..f65b53785a8 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2523,7 +2523,7 @@ static void __exit nv_exit(void)
 module_init(nv_init);
 module_exit(nv_exit);
 module_param_named(adma, adma_enabled, bool, 0444);
-MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
 module_param_named(swncq, swncq_enabled, bool, 0444);
 MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
 
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 43fa90b837e..f8f578a71b2 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -303,7 +303,7 @@ int unregister_mem_sect_under_nodes(struct memory_block *mem_blk)
 	sect_start_pfn = section_nr_to_pfn(mem_blk->phys_index);
 	sect_end_pfn = sect_start_pfn + PAGES_PER_SECTION - 1;
 	for (pfn = sect_start_pfn; pfn <= sect_end_pfn; pfn++) {
-		unsigned int nid;
+		int nid;
 
 		nid = get_nid_for_pfn(pfn);
 		if (nid < 0)
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 204332b2957..87e120e0a79 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o
 obj-$(CONFIG_BLK_DEV_FD)	+= floppy.o
 obj-$(CONFIG_AMIGA_FLOPPY)	+= amiflop.o
 obj-$(CONFIG_PS3_DISK)		+= ps3disk.o
+obj-$(CONFIG_PS3_VRAM)		+= ps3vram.o
 obj-$(CONFIG_ATARI_FLOPPY)	+= ataflop.o
 obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= brd.o
diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
index cc250577d40..eeea477d960 100644
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -173,7 +173,7 @@ skbfree(struct sk_buff *skb)
 		return;
 	while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
 		msleep(Sms);
-	if (i <= 0) {
+	if (i < 0) {
 		printk(KERN_ERR
 			"aoe: %s holds ref: %s\n",
 			skb->dev ? skb->dev->name : "netif",
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b5a06111463..4f9b6d79201 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3606,11 +3606,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 		if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
 			return -ENODEV;
 
-		/* Some devices (notably the HP Smart Array 5i Controller)
-		   need a little pause here */
-		schedule_timeout_uninterruptible(30*HZ);
-
-		/* Now try to get the controller to respond to a no-op */
+		/* Now try to get the controller to respond to a no-op. Some
+		   devices (notably the HP Smart Array 5i Controller) need
+		   up to 30 seconds to respond. */
 		for (i=0; i<30; i++) {
 			if (cciss_noop(pdev) == 0)
 				break;
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edbaac6c057..bf034557767 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -392,8 +392,7 @@ lo_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 	struct loop_device *lo = p->lo;
 	struct page *page = buf->page;
 	sector_t IV;
-	size_t size;
-	int ret;
+	int size, ret;
 
 	ret = buf->ops->confirm(pipe, buf);
 	if (unlikely(ret))
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
new file mode 100644
index 00000000000..393ed6760d7
--- /dev/null
+++ b/drivers/block/ps3vram.c
@@ -0,0 +1,865 @@
+/*
+ * ps3vram - Use extra PS3 video ram as MTD block device.
+ *
+ * Copyright 2009 Sony Corporation
+ *
+ * Based on the MTD ps3vram driver, which is
+ * Copyright (c) 2007-2008 Jim Paris <jim@jtan.com>
+ * Added support RSX DMA Vivien Chappelier <vivien.chappelier@free.fr>
+ */
+
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+#include <asm/firmware.h>
+#include <asm/lv1call.h>
+#include <asm/ps3.h>
+
+
+#define DEVICE_NAME		"ps3vram"
+
+
+#define XDR_BUF_SIZE (2 * 1024 * 1024) /* XDR buffer (must be 1MiB aligned) */
+#define XDR_IOIF 0x0c000000
+
+#define FIFO_BASE XDR_IOIF
+#define FIFO_SIZE (64 * 1024)
+
+#define DMA_PAGE_SIZE (4 * 1024)
+
+#define CACHE_PAGE_SIZE (256 * 1024)
+#define CACHE_PAGE_COUNT ((XDR_BUF_SIZE - FIFO_SIZE) / CACHE_PAGE_SIZE)
+
+#define CACHE_OFFSET CACHE_PAGE_SIZE
+#define FIFO_OFFSET 0
+
+#define CTRL_PUT 0x10
+#define CTRL_GET 0x11
+#define CTRL_TOP 0x15
+
+#define UPLOAD_SUBCH	1
+#define DOWNLOAD_SUBCH	2
+
+#define NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN	0x0000030c
+#define NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY	0x00000104
+
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601
+
+#define CACHE_PAGE_PRESENT 1
+#define CACHE_PAGE_DIRTY   2
+
+struct ps3vram_tag {
+	unsigned int address;
+	unsigned int flags;
+};
+
+struct ps3vram_cache {
+	unsigned int page_count;
+	unsigned int page_size;
+	struct ps3vram_tag *tags;
+	unsigned int hit;
+	unsigned int miss;
+};
+
+struct ps3vram_priv {
+	struct request_queue *queue;
+	struct gendisk *gendisk;
+
+	u64 size;
+
+	u64 memory_handle;
+	u64 context_handle;
+	u32 *ctrl;
+	u32 *reports;
+	u8 __iomem *ddr_base;
+	u8 *xdr_buf;
+
+	u32 *fifo_base;
+	u32 *fifo_ptr;
+
+	struct ps3vram_cache cache;
+
+	/* Used to serialize cache/DMA operations */
+	struct mutex lock;
+};
+
+
+static int ps3vram_major;
+
+
+static struct block_device_operations ps3vram_fops = {
+	.owner		= THIS_MODULE,
+};
+
+
+#define DMA_NOTIFIER_HANDLE_BASE 0x66604200 /* first DMA notifier handle */
+#define DMA_NOTIFIER_OFFSET_BASE 0x1000     /* first DMA notifier offset */
+#define DMA_NOTIFIER_SIZE        0x40
+#define NOTIFIER 7	/* notifier used for completion report */
+
+static char *size = "256M";
+module_param(size, charp, 0);
+MODULE_PARM_DESC(size, "memory size");
+
+static u32 *ps3vram_get_notifier(u32 *reports, int notifier)
+{
+	return (void *)reports + DMA_NOTIFIER_OFFSET_BASE +
+	       DMA_NOTIFIER_SIZE * notifier;
+}
+
+static void ps3vram_notifier_reset(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
+	int i;
+
+	for (i = 0; i < 4; i++)
+		notify[i] = 0xffffffff;
+}
+
+static int ps3vram_notifier_wait(struct ps3_system_bus_device *dev,
+				 unsigned int timeout_ms)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
+	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+
+	do {
+		if (!notify[3])
+			return 0;
+		msleep(1);
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static void ps3vram_init_ring(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+
+	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
+	priv->ctrl[CTRL_GET] = FIFO_BASE + FIFO_OFFSET;
+}
+
+static int ps3vram_wait_ring(struct ps3_system_bus_device *dev,
+			     unsigned int timeout_ms)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+
+	do {
+		if (priv->ctrl[CTRL_PUT] == priv->ctrl[CTRL_GET])
+			return 0;
+		msleep(1);
+	} while (time_before(jiffies, timeout));
+
+	dev_warn(&dev->core, "FIFO timeout (%08x/%08x/%08x)\n",
+		 priv->ctrl[CTRL_PUT], priv->ctrl[CTRL_GET],
+		 priv->ctrl[CTRL_TOP]);
+
+	return -ETIMEDOUT;
+}
+
+static void ps3vram_out_ring(struct ps3vram_priv *priv, u32 data)
+{
+	*(priv->fifo_ptr)++ = data;
+}
+
+static void ps3vram_begin_ring(struct ps3vram_priv *priv, u32 chan, u32 tag,
+			       u32 size)
+{
+	ps3vram_out_ring(priv, (size << 18) | (chan << 13) | tag);
+}
+
+static void ps3vram_rewind_ring(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	int status;
+
+	ps3vram_out_ring(priv, 0x20000000 | (FIFO_BASE + FIFO_OFFSET));
+
+	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
+
+	/* asking the HV for a blit will kick the FIFO */
+	status = lv1_gpu_context_attribute(priv->context_handle,
+					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
+					   0, 0, 0);
+	if (status)
+		dev_err(&dev->core,
+			"%s: lv1_gpu_context_attribute failed %d\n", __func__,
+			status);
+
+	priv->fifo_ptr = priv->fifo_base;
+}
+
+static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	int status;
+
+	mutex_lock(&ps3_gpu_mutex);
+
+	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET +
+			       (priv->fifo_ptr - priv->fifo_base) * sizeof(u32);
+
+	/* asking the HV for a blit will kick the FIFO */
+	status = lv1_gpu_context_attribute(priv->context_handle,
+					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
+					   0, 0, 0);
+	if (status)
+		dev_err(&dev->core,
+			"%s: lv1_gpu_context_attribute failed %d\n", __func__,
+			status);
+
+	if ((priv->fifo_ptr - priv->fifo_base) * sizeof(u32) >
+	    FIFO_SIZE - 1024) {
+		dev_dbg(&dev->core, "FIFO full, rewinding\n");
+		ps3vram_wait_ring(dev, 200);
+		ps3vram_rewind_ring(dev);
+	}
+
+	mutex_unlock(&ps3_gpu_mutex);
+}
+
+static void ps3vram_bind(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+
+	ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0, 1);
+	ps3vram_out_ring(priv, 0x31337303);
+	ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x180, 3);
+	ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
+	ps3vram_out_ring(priv, 0xfeed0001);	/* DMA system RAM instance */
+	ps3vram_out_ring(priv, 0xfeed0000);     /* DMA video RAM instance */
+
+	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0, 1);
+	ps3vram_out_ring(priv, 0x3137c0de);
+	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x180, 3);
+	ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
+	ps3vram_out_ring(priv, 0xfeed0000);	/* DMA video RAM instance */
+	ps3vram_out_ring(priv, 0xfeed0001);	/* DMA system RAM instance */
+
+	ps3vram_fire_ring(dev);
+}
+
+static int ps3vram_upload(struct ps3_system_bus_device *dev,
+			  unsigned int src_offset, unsigned int dst_offset,
+			  int len, int count)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+
+	ps3vram_begin_ring(priv, UPLOAD_SUBCH,
+			   NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
+	ps3vram_out_ring(priv, XDR_IOIF + src_offset);
+	ps3vram_out_ring(priv, dst_offset);
+	ps3vram_out_ring(priv, len);
+	ps3vram_out_ring(priv, len);
+	ps3vram_out_ring(priv, len);
+	ps3vram_out_ring(priv, count);
+	ps3vram_out_ring(priv, (1 << 8) | 1);
+	ps3vram_out_ring(priv, 0);
+
+	ps3vram_notifier_reset(dev);
+	ps3vram_begin_ring(priv, UPLOAD_SUBCH,
+			   NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
+	ps3vram_out_ring(priv, 0);
+	ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x100, 1);
+	ps3vram_out_ring(priv, 0);
+	ps3vram_fire_ring(dev);
+	if (ps3vram_notifier_wait(dev, 200) < 0) {
+		dev_warn(&dev->core, "%s: Notifier timeout\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int ps3vram_download(struct ps3_system_bus_device *dev,
+			    unsigned int src_offset, unsigned int dst_offset,
+			    int len, int count)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+
+	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
+			   NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
+	ps3vram_out_ring(priv, src_offset);
+	ps3vram_out_ring(priv, XDR_IOIF + dst_offset);
+	ps3vram_out_ring(priv, len);
+	ps3vram_out_ring(priv, len);
+	ps3vram_out_ring(priv, len);
+	ps3vram_out_ring(priv, count);
+	ps3vram_out_ring(priv, (1 << 8) | 1);
+	ps3vram_out_ring(priv, 0);
+
+	ps3vram_notifier_reset(dev);
+	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
+			   NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
+	ps3vram_out_ring(priv, 0);
+	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x100, 1);
+	ps3vram_out_ring(priv, 0);
+	ps3vram_fire_ring(dev);
+	if (ps3vram_notifier_wait(dev, 200) < 0) {
+		dev_warn(&dev->core, "%s: Notifier timeout\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+static void ps3vram_cache_evict(struct ps3_system_bus_device *dev, int entry)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_cache *cache = &priv->cache;
+
+	if (!(cache->tags[entry].flags & CACHE_PAGE_DIRTY))
+		return;
+
+	dev_dbg(&dev->core, "Flushing %d: 0x%08x\n", entry,
+		cache->tags[entry].address);
+	if (ps3vram_upload(dev, CACHE_OFFSET + entry * cache->page_size,
+			   cache->tags[entry].address, DMA_PAGE_SIZE,
+			   cache->page_size / DMA_PAGE_SIZE) < 0) {
+		dev_err(&dev->core,
+			"Failed to upload from 0x%x to " "0x%x size 0x%x\n",
+			entry * cache->page_size, cache->tags[entry].address,
+			cache->page_size);
+	}
+	cache->tags[entry].flags &= ~CACHE_PAGE_DIRTY;
+}
+
+static void ps3vram_cache_load(struct ps3_system_bus_device *dev, int entry,
+			       unsigned int address)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_cache *cache = &priv->cache;
+
+	dev_dbg(&dev->core, "Fetching %d: 0x%08x\n", entry, address);
+	if (ps3vram_download(dev, address,
+			     CACHE_OFFSET + entry * cache->page_size,
+			     DMA_PAGE_SIZE,
+			     cache->page_size / DMA_PAGE_SIZE) < 0) {
+		dev_err(&dev->core,
+			"Failed to download from 0x%x to 0x%x size 0x%x\n",
+			address, entry * cache->page_size, cache->page_size);
+	}
+
+	cache->tags[entry].address = address;
+	cache->tags[entry].flags |= CACHE_PAGE_PRESENT;
+}
+
+
+static void ps3vram_cache_flush(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_cache *cache = &priv->cache;
+	int i;
+
+	dev_dbg(&dev->core, "FLUSH\n");
+	for (i = 0; i < cache->page_count; i++) {
+		ps3vram_cache_evict(dev, i);
+		cache->tags[i].flags = 0;
+	}
+}
+
+static unsigned int ps3vram_cache_match(struct ps3_system_bus_device *dev,
+					loff_t address)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_cache *cache = &priv->cache;
+	unsigned int base;
+	unsigned int offset;
+	int i;
+	static int counter;
+
+	offset = (unsigned int) (address & (cache->page_size - 1));
+	base = (unsigned int) (address - offset);
+
+	/* fully associative check */
+	for (i = 0; i < cache->page_count; i++) {
+		if ((cache->tags[i].flags & CACHE_PAGE_PRESENT) &&
+		    cache->tags[i].address == base) {
+			cache->hit++;
+			dev_dbg(&dev->core, "Found entry %d: 0x%08x\n", i,
+				cache->tags[i].address);
+			return i;
+		}
+	}
+
+	/* choose a random entry */
+	i = (jiffies + (counter++)) % cache->page_count;
+	dev_dbg(&dev->core, "Using entry %d\n", i);
+
+	ps3vram_cache_evict(dev, i);
+	ps3vram_cache_load(dev, i, base);
+
+	cache->miss++;
+	return i;
+}
+
+static int ps3vram_cache_init(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+
+	priv->cache.page_count = CACHE_PAGE_COUNT;
+	priv->cache.page_size = CACHE_PAGE_SIZE;
+	priv->cache.tags = kzalloc(sizeof(struct ps3vram_tag) *
+				   CACHE_PAGE_COUNT, GFP_KERNEL);
+	if (priv->cache.tags == NULL) {
+		dev_err(&dev->core, "Could not allocate cache tags\n");
+		return -ENOMEM;
+	}
+
+	dev_info(&dev->core, "Created ram cache: %d entries, %d KiB each\n",
+		CACHE_PAGE_COUNT, CACHE_PAGE_SIZE / 1024);
+
+	return 0;
+}
+
+static void ps3vram_cache_cleanup(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+
+	ps3vram_cache_flush(dev);
+	kfree(priv->cache.tags);
+}
+
+static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
+			size_t len, size_t *retlen, u_char *buf)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	unsigned int cached, count;
+
+	dev_dbg(&dev->core, "%s: from=0x%08x len=0x%zx\n", __func__,
+		(unsigned int)from, len);
+
+	if (from >= priv->size)
+		return -EIO;
+
+	if (len > priv->size - from)
+		len = priv->size - from;
+
+	/* Copy from vram to buf */
+	count = len;
+	while (count) {
+		unsigned int offset, avail;
+		unsigned int entry;
+
+		offset = (unsigned int) (from & (priv->cache.page_size - 1));
+		avail  = priv->cache.page_size - offset;
+
+		mutex_lock(&priv->lock);
+
+		entry = ps3vram_cache_match(dev, from);
+		cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
+
+		dev_dbg(&dev->core, "%s: from=%08x cached=%08x offset=%08x "
+			"avail=%08x count=%08x\n", __func__,
+			(unsigned int)from, cached, offset, avail, count);
+
+		if (avail > count)
+			avail = count;
+		memcpy(buf, priv->xdr_buf + cached, avail);
+
+		mutex_unlock(&priv->lock);
+
+		buf += avail;
+		count -= avail;
+		from += avail;
+	}
+
+	*retlen = len;
+	return 0;
+}
+
+static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
+			 size_t len, size_t *retlen, const u_char *buf)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	unsigned int cached, count;
+
+	if (to >= priv->size)
+		return -EIO;
+
+	if (len > priv->size - to)
+		len = priv->size - to;
+
+	/* Copy from buf to vram */
+	count = len;
+	while (count) {
+		unsigned int offset, avail;
+		unsigned int entry;
+
+		offset = (unsigned int) (to & (priv->cache.page_size - 1));
+		avail  = priv->cache.page_size - offset;
+
+		mutex_lock(&priv->lock);
+
+		entry = ps3vram_cache_match(dev, to);
+		cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
+
+		dev_dbg(&dev->core, "%s: to=%08x cached=%08x offset=%08x "
+			"avail=%08x count=%08x\n", __func__, (unsigned int)to,
+			cached, offset, avail, count);
+
+		if (avail > count)
+			avail = count;
+		memcpy(priv->xdr_buf + cached, buf, avail);
+
+		priv->cache.tags[entry].flags |= CACHE_PAGE_DIRTY;
+
+		mutex_unlock(&priv->lock);
+
+		buf += avail;
+		count -= avail;
+		to += avail;
+	}
+
+	*retlen = len;
+	return 0;
+}
+
+static int ps3vram_proc_show(struct seq_file *m, void *v)
+{
+	struct ps3vram_priv *priv = m->private;
+
+	seq_printf(m, "hit:%u\nmiss:%u\n", priv->cache.hit, priv->cache.miss);
+	return 0;
+}
+
+static int ps3vram_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ps3vram_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations ps3vram_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= ps3vram_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void __devinit ps3vram_proc_init(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct proc_dir_entry *pde;
+
+	pde = proc_create(DEVICE_NAME, 0444, NULL, &ps3vram_proc_fops);
+	if (!pde) {
+		dev_warn(&dev->core, "failed to create /proc entry\n");
+		return;
+	}
+
+	pde->owner = THIS_MODULE;
+	pde->data = priv;
+}
+
+static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
+{
+	struct ps3_system_bus_device *dev = q->queuedata;
+	int write = bio_data_dir(bio) == WRITE;
+	const char *op = write ? "write" : "read";
+	loff_t offset = bio->bi_sector << 9;
+	int error = 0;
+	struct bio_vec *bvec;
+	unsigned int i;
+
+	dev_dbg(&dev->core, "%s\n", __func__);
+
+	bio_for_each_segment(bvec, bio, i) {
+		/* PS3 is ppc64, so we don't handle highmem */
+		char *ptr = page_address(bvec->bv_page) + bvec->bv_offset;
+		size_t len = bvec->bv_len, retlen;
+
+		dev_dbg(&dev->core, "    %s %zu bytes at offset %llu\n", op,
+			len, offset);
+		if (write)
+			error = ps3vram_write(dev, offset, len, &retlen, ptr);
+		else
+			error = ps3vram_read(dev, offset, len, &retlen, ptr);
+
+		if (error) {
+			dev_err(&dev->core, "%s failed\n", op);
+			goto out;
+		}
+
+		if (retlen != len) {
+			dev_err(&dev->core, "Short %s\n", op);
+			goto out;
+		}
+
+		offset += len;
+	}
+
+	dev_dbg(&dev->core, "%s completed\n", op);
+
+out:
+	bio_endio(bio, error);
+	return 0;
+}
+
+static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv;
+	int error, status;
+	struct request_queue *queue;
+	struct gendisk *gendisk;
+	u64 ddr_lpar, ctrl_lpar, info_lpar, reports_lpar, ddr_size,
+	    reports_size;
+	char *rest;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		error = -ENOMEM;
+		goto fail;
+	}
+
+	mutex_init(&priv->lock);
+	dev->core.driver_data = priv;
+
+	priv = dev->core.driver_data;
+
+	/* Allocate XDR buffer (1MiB aligned) */
+	priv->xdr_buf = (void *)__get_free_pages(GFP_KERNEL,
+		get_order(XDR_BUF_SIZE));
+	if (priv->xdr_buf == NULL) {
+		dev_err(&dev->core, "Could not allocate XDR buffer\n");
+		error = -ENOMEM;
+		goto fail_free_priv;
+	}
+
+	/* Put FIFO at begginning of XDR buffer */
+	priv->fifo_base = (u32 *) (priv->xdr_buf + FIFO_OFFSET);
+	priv->fifo_ptr = priv->fifo_base;
+
+	/* XXX: Need to open GPU, in case ps3fb or snd_ps3 aren't loaded */
+	if (ps3_open_hv_device(dev)) {
+		dev_err(&dev->core, "ps3_open_hv_device failed\n");
+		error = -EAGAIN;
+		goto out_close_gpu;
+	}
+
+	/* Request memory */
+	status = -1;
+	ddr_size = ALIGN(memparse(size, &rest), 1024*1024);
+	if (!ddr_size) {
+		dev_err(&dev->core, "Specified size is too small\n");
+		error = -EINVAL;
+		goto out_close_gpu;
+	}
+
+	while (ddr_size > 0) {
+		status = lv1_gpu_memory_allocate(ddr_size, 0, 0, 0, 0,
+						 &priv->memory_handle,
+						 &ddr_lpar);
+		if (!status)
+			break;
+		ddr_size -= 1024*1024;
+	}
+	if (status) {
+		dev_err(&dev->core, "lv1_gpu_memory_allocate failed %d\n",
+			status);
+		error = -ENOMEM;
+		goto out_free_xdr_buf;
+	}
+
+	/* Request context */
+	status = lv1_gpu_context_allocate(priv->memory_handle, 0,
+					  &priv->context_handle, &ctrl_lpar,
+					  &info_lpar, &reports_lpar,
+					  &reports_size);
+	if (status) {
+		dev_err(&dev->core, "lv1_gpu_context_allocate failed %d\n",
+			status);
+		error = -ENOMEM;
+		goto out_free_memory;
+	}
+
+	/* Map XDR buffer to RSX */
+	status = lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
+				       ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
+				       XDR_BUF_SIZE, 0);
+	if (status) {
+		dev_err(&dev->core, "lv1_gpu_context_iomap failed %d\n",
+			status);
+		error = -ENOMEM;
+		goto out_free_context;
+	}
+
+	priv->ddr_base = ioremap_flags(ddr_lpar, ddr_size, _PAGE_NO_CACHE);
+
+	if (!priv->ddr_base) {
+		dev_err(&dev->core, "ioremap DDR failed\n");
+		error = -ENOMEM;
+		goto out_free_context;
+	}
+
+	priv->ctrl = ioremap(ctrl_lpar, 64 * 1024);
+	if (!priv->ctrl) {
+		dev_err(&dev->core, "ioremap CTRL failed\n");
+		error = -ENOMEM;
+		goto out_unmap_vram;
+	}
+
+	priv->reports = ioremap(reports_lpar, reports_size);
+	if (!priv->reports) {
+		dev_err(&dev->core, "ioremap REPORTS failed\n");
+		error = -ENOMEM;
+		goto out_unmap_ctrl;
+	}
+
+	mutex_lock(&ps3_gpu_mutex);
+	ps3vram_init_ring(dev);
+	mutex_unlock(&ps3_gpu_mutex);
+
+	priv->size = ddr_size;
+
+	ps3vram_bind(dev);
+
+	mutex_lock(&ps3_gpu_mutex);
+	error = ps3vram_wait_ring(dev, 100);
+	mutex_unlock(&ps3_gpu_mutex);
+	if (error < 0) {
+		dev_err(&dev->core, "Failed to initialize channels\n");
+		error = -ETIMEDOUT;
+		goto out_unmap_reports;
+	}
+
+	ps3vram_cache_init(dev);
+	ps3vram_proc_init(dev);
+
+	queue = blk_alloc_queue(GFP_KERNEL);
+	if (!queue) {
+		dev_err(&dev->core, "blk_alloc_queue failed\n");
+		error = -ENOMEM;
+		goto out_cache_cleanup;
+	}
+
+	priv->queue = queue;
+	queue->queuedata = dev;
+	blk_queue_make_request(queue, ps3vram_make_request);
+	blk_queue_max_phys_segments(queue, MAX_PHYS_SEGMENTS);
+	blk_queue_max_hw_segments(queue, MAX_HW_SEGMENTS);
+	blk_queue_max_segment_size(queue, MAX_SEGMENT_SIZE);
+	blk_queue_max_sectors(queue, SAFE_MAX_SECTORS);
+
+	gendisk = alloc_disk(1);
+	if (!gendisk) {
+		dev_err(&dev->core, "alloc_disk failed\n");
+		error = -ENOMEM;
+		goto fail_cleanup_queue;
+	}
+
+	priv->gendisk = gendisk;
+	gendisk->major = ps3vram_major;
+	gendisk->first_minor = 0;
+	gendisk->fops = &ps3vram_fops;
+	gendisk->queue = queue;
+	gendisk->private_data = dev;
+	gendisk->driverfs_dev = &dev->core;
+	strlcpy(gendisk->disk_name, DEVICE_NAME, sizeof(gendisk->disk_name));
+	set_capacity(gendisk, priv->size >> 9);
+
+	dev_info(&dev->core, "%s: Using %lu MiB of GPU memory\n",
+		 gendisk->disk_name, get_capacity(gendisk) >> 11);
+
+	add_disk(gendisk);
+	return 0;
+
+fail_cleanup_queue:
+	blk_cleanup_queue(queue);
+out_cache_cleanup:
+	remove_proc_entry(DEVICE_NAME, NULL);
+	ps3vram_cache_cleanup(dev);
+out_unmap_reports:
+	iounmap(priv->reports);
+out_unmap_ctrl:
+	iounmap(priv->ctrl);
+out_unmap_vram:
+	iounmap(priv->ddr_base);
+out_free_context:
+	lv1_gpu_context_free(priv->context_handle);
+out_free_memory:
+	lv1_gpu_memory_free(priv->memory_handle);
+out_close_gpu:
+	ps3_close_hv_device(dev);
+out_free_xdr_buf:
+	free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
+fail_free_priv:
+	kfree(priv);
+	dev->core.driver_data = NULL;
+fail:
+	return error;
+}
+
+static int ps3vram_remove(struct ps3_system_bus_device *dev)
+{
+	struct ps3vram_priv *priv = dev->core.driver_data;
+
+	del_gendisk(priv->gendisk);
+	put_disk(priv->gendisk);
+	blk_cleanup_queue(priv->queue);
+	remove_proc_entry(DEVICE_NAME, NULL);
+	ps3vram_cache_cleanup(dev);
+	iounmap(priv->reports);
+	iounmap(priv->ctrl);
+	iounmap(priv->ddr_base);
+	lv1_gpu_context_free(priv->context_handle);
+	lv1_gpu_memory_free(priv->memory_handle);
+	ps3_close_hv_device(dev);
+	free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
+	kfree(priv);
+	dev->core.driver_data = NULL;
+	return 0;
+}
+
+static struct ps3_system_bus_driver ps3vram = {
+	.match_id	= PS3_MATCH_ID_GPU,
+	.match_sub_id	= PS3_MATCH_SUB_ID_GPU_RAMDISK,
+	.core.name	= DEVICE_NAME,
+	.core.owner	= THIS_MODULE,
+	.probe		= ps3vram_probe,
+	.remove		= ps3vram_remove,
+	.shutdown	= ps3vram_remove,
+};
+
+
+static int __init ps3vram_init(void)
+{
+	int error;
+
+	if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+		return -ENODEV;
+
+	error = register_blkdev(0, DEVICE_NAME);
+	if (error <= 0) {
+		pr_err("%s: register_blkdev failed %d\n", DEVICE_NAME, error);
+		return error;
+	}
+	ps3vram_major = error;
+
+	pr_info("%s: registered block device major %d\n", DEVICE_NAME,
+		ps3vram_major);
+
+	error = ps3_system_bus_driver_register(&ps3vram);
+	if (error)
+		unregister_blkdev(ps3vram_major, DEVICE_NAME);
+
+	return error;
+}
+
+static void __exit ps3vram_exit(void)
+{
+	ps3_system_bus_driver_unregister(&ps3vram);
+	unregister_blkdev(ps3vram_major, DEVICE_NAME);
+}
+
+module_init(ps3vram_init);
+module_exit(ps3vram_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PS3 Video RAM Storage Driver");
+MODULE_AUTHOR("Sony Corporation");
+MODULE_ALIAS(PS3_MODULE_ALIAS_GPU_RAMDISK);
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b6c8ce25435..8f905089b72 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -977,6 +977,8 @@ static void backend_changed(struct xenbus_device *dev,
 		break;
 
 	case XenbusStateClosing:
+		if (info->gd == NULL)
+			xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
 		bd = bdget_disk(info->gd, 0);
 		if (bd == NULL)
 			xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 381d686fc1a..119be3442f2 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -489,6 +489,28 @@ static void ace_fsm_dostate(struct ace_device *ace)
 		ace->fsm_state, ace->id_req_count);
 #endif
 
+	/* Verify that there is actually a CF in the slot. If not, then
+	 * bail out back to the idle state and wake up all the waiters */
+	status = ace_in32(ace, ACE_STATUS);
+	if ((status & ACE_STATUS_CFDETECT) == 0) {
+		ace->fsm_state = ACE_FSM_STATE_IDLE;
+		ace->media_change = 1;
+		set_capacity(ace->gd, 0);
+		dev_info(ace->dev, "No CF in slot\n");
+
+		/* Drop all pending requests */
+		while ((req = elv_next_request(ace->queue)) != NULL)
+			end_request(req, 0);
+
+		/* Drop back to IDLE state and notify waiters */
+		ace->fsm_state = ACE_FSM_STATE_IDLE;
+		ace->id_result = -EIO;
+		while (ace->id_req_count) {
+			complete(&ace->id_completion);
+			ace->id_req_count--;
+		}
+	}
+
 	switch (ace->fsm_state) {
 	case ACE_FSM_STATE_IDLE:
 		/* See if there is anything to do */
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 52f4361eb6e..d765afda9c2 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -271,15 +271,15 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
 	nb_order = (nb_order >> 1) & 7;
 	pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
 	nb_aper = nb_base << 25;
-	if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
-		return 0;
-	}
 
 	/* Northbridge seems to contain crap. Try the AGP bridge. */
 
 	pci_read_config_word(agp, cap+0x14, &apsize);
-	if (apsize == 0xffff)
+	if (apsize == 0xffff) {
+		if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+			return 0;
 		return -1;
+	}
 
 	apsize &= 0xfff;
 	/* Some BIOS use weird encodings not in the AGPv3 table. */
@@ -301,6 +301,11 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
 		order = nb_order;
 	}
 
+	if (nb_order >= order) {
+		if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+			return 0;
+	}
+
 	dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
 		 aper, 32 << order);
 	if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index c7714185f83..4373adb2119 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -633,13 +633,15 @@ static void intel_i830_init_gtt_entries(void)
 			break;
 		}
 	}
-	if (gtt_entries > 0)
+	if (gtt_entries > 0) {
 		dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
 		       gtt_entries / KB(1), local ? "local" : "stolen");
-	else
+		gtt_entries /= KB(4);
+	} else {
 		dev_info(&agp_bridge->dev->dev,
 		       "no pre-allocated video memory detected\n");
-	gtt_entries /= KB(4);
+		gtt_entries = 0;
+	}
 
 	intel_private.gtt_entries = gtt_entries;
 }
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index db60539bf67..699e3422ad9 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -359,9 +359,16 @@ fail:
 	return error;
 }
 
-static struct device *next_device(struct klist_iter *i) {
-	struct klist_node * n = klist_next(i);
-	return n ? container_of(n, struct device, knode_parent) : NULL;
+static int
+find_quicksilver(struct device *dev, void *data)
+{
+	struct parisc_device **lba = data;
+	struct parisc_device *padev = to_parisc_device(dev);
+
+	if (IS_QUICKSILVER(padev))
+		*lba = padev;
+
+	return 0;
 }
 
 static int
@@ -372,8 +379,6 @@ parisc_agp_init(void)
 	int err = -1;
 	struct parisc_device *sba = NULL, *lba = NULL;
 	struct lba_device *lbadev = NULL;
-	struct device *dev = NULL;
-	struct klist_iter i;
 
 	if (!sba_list)
 		goto out;
@@ -386,13 +391,7 @@ parisc_agp_init(void)
 	}
 
 	/* Now search our Pluto for our precious AGP device... */
-	klist_iter_init(&sba->dev.klist_children, &i);
-	while ((dev = next_device(&i))) {
-		struct parisc_device *padev = to_parisc_device(dev);
-		if (IS_QUICKSILVER(padev))
-			lba = padev;
-	}
-	klist_iter_exit(&i);
+	device_for_each_child(&sba->dev, &lba, find_quicksilver);
 
 	if (!lba) {
 		printk(KERN_INFO DRVPFX "No AGP devices found.\n");
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 6e6eb445d37..c76bccf5354 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -1139,15 +1139,6 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
 	hvcsd->tty = tty;
 	tty->driver_data = hvcsd;
 
-	/*
-	 * Set this driver to low latency so that we actually have a chance at
-	 * catching a throttled TTY after we flip_buffer_push.  Otherwise the
-	 * flush_to_async may not execute until after the kernel_thread has
-	 * yielded and resumed the next flip_buffer_push resulting in data
-	 * loss.
-	 */
-	tty->low_latency = 1;
-
 	memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
 
 	/*
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index 406f8742a26..2989056a9e3 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -810,7 +810,6 @@ static int hvsi_open(struct tty_struct *tty, struct file *filp)
 	hp = &hvsi_ports[line];
 
 	tty->driver_data = hp;
-	tty->low_latency = 1; /* avoid throttle/tty_flip_buffer_push race */
 
 	mb();
 	if (hp->state == HVSI_FSP_DIED)
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index ba68a4671cb..538313f9e7a 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev)
 		return -EBUSY;
 
 	if (cpu_is_omap24xx()) {
-		rng_ick = clk_get(&pdev->dev, "rng_ick");
+		rng_ick = clk_get(&pdev->dev, "ick");
 		if (IS_ERR(rng_ick)) {
 			dev_err(&pdev->dev, "Could not get rng_ick\n");
 			ret = PTR_ERR(rng_ick);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b55cb67435b..d6daf3c507d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -754,11 +754,6 @@ static struct kobj_type ktype_cpufreq = {
 	.release	= cpufreq_sysfs_release,
 };
 
-static struct kobj_type ktype_empty_cpufreq = {
-	.sysfs_ops	= &sysfs_ops,
-	.release	= cpufreq_sysfs_release,
-};
-
 
 /**
  * cpufreq_add_dev - add a CPU device
@@ -892,36 +887,26 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
 
 	/* prepare interface data */
-	if (!cpufreq_driver->hide_interface) {
-		ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
-					   &sys_dev->kobj, "cpufreq");
+	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
+				   "cpufreq");
+	if (ret)
+		goto err_out_driver_exit;
+
+	/* set up files for this cpu device */
+	drv_attr = cpufreq_driver->attr;
+	while ((drv_attr) && (*drv_attr)) {
+		ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
 		if (ret)
 			goto err_out_driver_exit;
-
-		/* set up files for this cpu device */
-		drv_attr = cpufreq_driver->attr;
-		while ((drv_attr) && (*drv_attr)) {
-			ret = sysfs_create_file(&policy->kobj,
-						&((*drv_attr)->attr));
-			if (ret)
-				goto err_out_driver_exit;
-			drv_attr++;
-		}
-		if (cpufreq_driver->get) {
-			ret = sysfs_create_file(&policy->kobj,
-						&cpuinfo_cur_freq.attr);
-			if (ret)
-				goto err_out_driver_exit;
-		}
-		if (cpufreq_driver->target) {
-			ret = sysfs_create_file(&policy->kobj,
-						&scaling_cur_freq.attr);
-			if (ret)
-				goto err_out_driver_exit;
-		}
-	} else {
-		ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq,
-					   &sys_dev->kobj, "cpufreq");
+		drv_attr++;
+	}
+	if (cpufreq_driver->get) {
+		ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+		if (ret)
+			goto err_out_driver_exit;
+	}
+	if (cpufreq_driver->target) {
+		ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
 		if (ret)
 			goto err_out_driver_exit;
 	}
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index 33bd7534751..25b743abfb5 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dca/dca-sysfs.c b/drivers/dca/dca-sysfs.c
index bb538b9690e..ee916c9857e 100644
--- a/drivers/dca/dca-sysfs.c
+++ b/drivers/dca/dca-sysfs.c
@@ -1,3 +1,24 @@
+/*
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 732fa1ec36a..e190d8b3070 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -430,13 +430,15 @@ late_initcall(dmatest_init);
 static void __exit dmatest_exit(void)
 {
 	struct dmatest_chan *dtc, *_dtc;
+	struct dma_chan *chan;
 
 	list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
 		list_del(&dtc->node);
+		chan = dtc->chan;
 		dmatest_cleanup_channel(dtc);
 		pr_debug("dmatest: dropped channel %s\n",
-			 dma_chan_name(dtc->chan));
-		dma_release_channel(dtc->chan);
+			 dma_chan_name(chan));
+		dma_release_channel(chan);
 	}
 }
 module_exit(dmatest_exit);
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 70126a60623..86d6da47f55 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -158,7 +158,8 @@ static void dma_start(struct fsl_dma_chan *fsl_chan)
 
 static void dma_halt(struct fsl_dma_chan *fsl_chan)
 {
-	int i = 0;
+	int i;
+
 	DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
 		DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
 		32);
@@ -166,8 +167,11 @@ static void dma_halt(struct fsl_dma_chan *fsl_chan)
 		DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
 		| FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
 
-	while (!dma_is_idle(fsl_chan) && (i++ < 100))
+	for (i = 0; i < 100; i++) {
+		if (dma_is_idle(fsl_chan))
+			break;
 		udelay(10);
+	}
 	if (i >= 100 && !dma_is_idle(fsl_chan))
 		dev_err(fsl_chan->dev, "DMA halt timeout!\n");
 }
diff --git a/drivers/dma/ioat.c b/drivers/dma/ioat.c
index 4105d6575b6..ed83dd9df19 100644
--- a/drivers/dma/ioat.c
+++ b/drivers/dma/ioat.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c
index 6cf622da028..c012a1e1504 100644
--- a/drivers/dma/ioat_dca.c
+++ b/drivers/dma/ioat_dca.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -49,6 +49,23 @@
 
 #define DCA_TAG_MAP_MASK 0xDF
 
+/* expected tag map bytes for I/OAT ver.2 */
+#define DCA2_TAG_MAP_BYTE0 0x80
+#define DCA2_TAG_MAP_BYTE1 0x0
+#define DCA2_TAG_MAP_BYTE2 0x81
+#define DCA2_TAG_MAP_BYTE3 0x82
+#define DCA2_TAG_MAP_BYTE4 0x82
+
+/* verify if tag map matches expected values */
+static inline int dca2_tag_map_valid(u8 *tag_map)
+{
+	return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+		(tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+		(tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+		(tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+		(tag_map[4] == DCA2_TAG_MAP_BYTE4));
+}
+
 /*
  * "Legacy" DCA systems do not implement the DCA register set in the
  * I/OAT device.  Software needs direct support for their tag mappings.
@@ -452,6 +469,13 @@ struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase)
 			ioatdca->tag_map[i] = 0;
 	}
 
+	if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+		dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+			"disabling DCA\n");
+		free_dca_provider(dca);
+		return NULL;
+	}
+
 	err = register_dca_provider(dca, &pdev->dev);
 	if (err) {
 		free_dca_provider(dca);
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index b3759c4b653..5905cd36bcd 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2004 - 2007 Intel Corporation.
+ * Copyright(c) 2004 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -189,11 +189,13 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device)
 		ioat_chan->xfercap = xfercap;
 		ioat_chan->desccount = 0;
 		INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
-		if (ioat_chan->device->version != IOAT_VER_1_2) {
-			writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
-					| IOAT_DMA_DCA_ANY_CPU,
-				ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
-		}
+		if (ioat_chan->device->version == IOAT_VER_2_0)
+			writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
+			       IOAT_DMA_DCA_ANY_CPU,
+			       ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
+		else if (ioat_chan->device->version == IOAT_VER_3_0)
+			writel(IOAT_DMA_DCA_ANY_CPU,
+			       ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
 		spin_lock_init(&ioat_chan->cleanup_lock);
 		spin_lock_init(&ioat_chan->desc_lock);
 		INIT_LIST_HEAD(&ioat_chan->free_desc);
@@ -1169,9 +1171,8 @@ static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
 				 * up if the client is done with the descriptor
 				 */
 				if (async_tx_test_ack(&desc->async_tx)) {
-					list_del(&desc->node);
-					list_add_tail(&desc->node,
-						      &ioat_chan->free_desc);
+					list_move_tail(&desc->node,
+						       &ioat_chan->free_desc);
 				} else
 					desc->async_tx.cookie = 0;
 			} else {
@@ -1362,6 +1363,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 	dma_cookie_t cookie;
 	int err = 0;
 	struct completion cmp;
+	unsigned long tmo;
 
 	src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
 	if (!src)
@@ -1413,9 +1415,10 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 	}
 	device->common.device_issue_pending(dma_chan);
 
-	wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+	tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
 
-	if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+	if (tmo == 0 ||
+	    device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
 					!= DMA_SUCCESS) {
 		dev_err(&device->pdev->dev,
 			"Self-test copy timed out, disabling\n");
@@ -1657,6 +1660,13 @@ struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
 		" %d channels, device version 0x%02x, driver version %s\n",
 		device->common.chancnt, device->version, IOAT_DMA_VERSION);
 
+	if (!device->common.chancnt) {
+		dev_err(&device->pdev->dev,
+			"Intel(R) I/OAT DMA Engine problem found: "
+			"zero channels detected\n");
+		goto err_setup_interrupts;
+	}
+
 	err = ioat_dma_setup_interrupts(device);
 	if (err)
 		goto err_setup_interrupts;
@@ -1696,6 +1706,9 @@ void ioat_dma_remove(struct ioatdma_device *device)
 	struct dma_chan *chan, *_chan;
 	struct ioat_dma_chan *ioat_chan;
 
+	if (device->version != IOAT_VER_3_0)
+		cancel_delayed_work(&device->work);
+
 	ioat_dma_remove_interrupts(device);
 
 	dma_async_device_unregister(&device->common);
@@ -1707,10 +1720,6 @@ void ioat_dma_remove(struct ioatdma_device *device)
 	pci_release_regions(device->pdev);
 	pci_disable_device(device->pdev);
 
-	if (device->version != IOAT_VER_3_0) {
-		cancel_delayed_work(&device->work);
-	}
-
 	list_for_each_entry_safe(chan, _chan,
 				 &device->common.channels, device_node) {
 		ioat_chan = to_ioat_chan(chan);
diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h
index a3306d0e137..a52ff4bd460 100644
--- a/drivers/dma/ioatdma.h
+++ b/drivers/dma/ioatdma.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -29,7 +29,7 @@
 #include <linux/pci_ids.h>
 #include <net/tcp.h>
 
-#define IOAT_DMA_VERSION  "3.30"
+#define IOAT_DMA_VERSION  "3.64"
 
 enum ioat_interrupt {
 	none = 0,
@@ -135,12 +135,14 @@ static inline void ioat_set_tcp_copy_break(struct ioatdma_device *dev)
 	#ifdef CONFIG_NET_DMA
 	switch (dev->version) {
 	case IOAT_VER_1_2:
-	case IOAT_VER_3_0:
 		sysctl_tcp_dma_copybreak = 4096;
 		break;
 	case IOAT_VER_2_0:
 		sysctl_tcp_dma_copybreak = 2048;
 		break;
+	case IOAT_VER_3_0:
+		sysctl_tcp_dma_copybreak = 262144;
+		break;
 	}
 	#endif
 }
diff --git a/drivers/dma/ioatdma_hw.h b/drivers/dma/ioatdma_hw.h
index f1ae2c776f7..afa57eef86c 100644
--- a/drivers/dma/ioatdma_hw.h
+++ b/drivers/dma/ioatdma_hw.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/ioatdma_registers.h b/drivers/dma/ioatdma_registers.h
index 827cb503cac..49bc277424f 100644
--- a/drivers/dma/ioatdma_registers.h
+++ b/drivers/dma/ioatdma_registers.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 647374acba9..16adbe61cfb 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -928,19 +928,19 @@ iop_adma_xor_zero_sum_self_test(struct iop_adma_device *device)
 
 	for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
 		xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
-		if (!xor_srcs[src_idx])
-			while (src_idx--) {
+		if (!xor_srcs[src_idx]) {
+			while (src_idx--)
 				__free_page(xor_srcs[src_idx]);
-				return -ENOMEM;
-			}
+			return -ENOMEM;
+		}
 	}
 
 	dest = alloc_page(GFP_KERNEL);
-	if (!dest)
-		while (src_idx--) {
+	if (!dest) {
+		while (src_idx--)
 			__free_page(xor_srcs[src_idx]);
-			return -ENOMEM;
-		}
+		return -ENOMEM;
+	}
 
 	/* Fill in src buffers */
 	for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 1f154d08e98..da781d10789 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -729,7 +729,7 @@ static int ipu_init_channel_buffer(struct idmac_channel *ichan,
 
 	ichan->status = IPU_CHANNEL_READY;
 
-	spin_unlock_irqrestore(ipu->lock, flags);
+	spin_unlock_irqrestore(&ipu->lock, flags);
 
 	return 0;
 }
@@ -1649,7 +1649,7 @@ static int ipu_probe(struct platform_device *pdev)
 	}
 
 	/* Get IPU clock */
-	ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk");
+	ipu_data.ipu_clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(ipu_data.ipu_clk)) {
 		ret = PTR_ERR(ipu_data.ipu_clk);
 		goto err_clk_get;
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 5d5d5b31867..cb7f26fb9f1 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1019,19 +1019,19 @@ mv_xor_xor_self_test(struct mv_xor_device *device)
 
 	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
 		xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
-		if (!xor_srcs[src_idx])
-			while (src_idx--) {
+		if (!xor_srcs[src_idx]) {
+			while (src_idx--)
 				__free_page(xor_srcs[src_idx]);
-				return -ENOMEM;
-			}
+			return -ENOMEM;
+		}
 	}
 
 	dest = alloc_page(GFP_KERNEL);
-	if (!dest)
-		while (src_idx--) {
+	if (!dest) {
+		while (src_idx--)
 			__free_page(xor_srcs[src_idx]);
-			return -ENOMEM;
-		}
+		return -ENOMEM;
+	}
 
 	/* Fill in src buffers */
 	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 6dab63bdc4c..6d21b9e48b8 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1105,7 +1105,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 					 1024 * 1024,
 					 MTRR_TYPE_WRCOMB, 1);
 	if (dev_priv->mm.gtt_mtrr < 0) {
-		DRM_INFO("MTRR allocation failed\n.  Graphics "
+		DRM_INFO("MTRR allocation failed.  Graphics "
 			 "performance may suffer.\n");
 	}
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 17fa40858d2..d6cc9861e0a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -279,7 +279,6 @@ typedef struct drm_i915_private {
 	u8 saveAR_INDEX;
 	u8 saveAR[21];
 	u8 saveDACMASK;
-	u8 saveDACDATA[256*3]; /* 256 3-byte colors */
 	u8 saveCR[37];
 
 	struct {
@@ -457,6 +456,12 @@ struct drm_i915_gem_object {
 
 	/** for phy allocated objects */
 	struct drm_i915_gem_phys_object *phys_obj;
+
+	/**
+	 * Used for checking the object doesn't appear more than once
+	 * in an execbuffer object list.
+	 */
+	int in_execbuffer;
 };
 
 /**
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 85685bfd12d..37427e4016c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1476,7 +1476,7 @@ static void i915_write_fence_reg(struct drm_i915_fence_reg *reg)
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	int regnum = obj_priv->fence_reg;
 	int tile_width;
-	uint32_t val;
+	uint32_t fence_reg, val;
 	uint32_t pitch_val;
 
 	if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
@@ -1503,7 +1503,11 @@ static void i915_write_fence_reg(struct drm_i915_fence_reg *reg)
 	val |= pitch_val << I830_FENCE_PITCH_SHIFT;
 	val |= I830_FENCE_REG_VALID;
 
-	I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val);
+	if (regnum < 8)
+		fence_reg = FENCE_REG_830_0 + (regnum * 4);
+	else
+		fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4);
+	I915_WRITE(fence_reg, val);
 }
 
 static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
@@ -1557,7 +1561,8 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	struct drm_i915_fence_reg *reg = NULL;
-	int i, ret;
+	struct drm_i915_gem_object *old_obj_priv = NULL;
+	int i, ret, avail;
 
 	switch (obj_priv->tiling_mode) {
 	case I915_TILING_NONE:
@@ -1580,25 +1585,46 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write)
 	}
 
 	/* First try to find a free reg */
+try_again:
+	avail = 0;
 	for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
 		reg = &dev_priv->fence_regs[i];
 		if (!reg->obj)
 			break;
+
+		old_obj_priv = reg->obj->driver_private;
+		if (!old_obj_priv->pin_count)
+		    avail++;
 	}
 
 	/* None available, try to steal one or wait for a user to finish */
 	if (i == dev_priv->num_fence_regs) {
-		struct drm_i915_gem_object *old_obj_priv = NULL;
+		uint32_t seqno = dev_priv->mm.next_gem_seqno;
 		loff_t offset;
 
-try_again:
-		/* Could try to use LRU here instead... */
+		if (avail == 0)
+			return -ENOMEM;
+
 		for (i = dev_priv->fence_reg_start;
 		     i < dev_priv->num_fence_regs; i++) {
+			uint32_t this_seqno;
+
 			reg = &dev_priv->fence_regs[i];
 			old_obj_priv = reg->obj->driver_private;
-			if (!old_obj_priv->pin_count)
+
+			if (old_obj_priv->pin_count)
+				continue;
+
+			/* i915 uses fences for GPU access to tiled buffers */
+			if (IS_I965G(dev) || !old_obj_priv->active)
 				break;
+
+			/* find the seqno of the first available fence */
+			this_seqno = old_obj_priv->last_rendering_seqno;
+			if (this_seqno != 0 &&
+			    reg->obj->write_domain == 0 &&
+			    i915_seqno_passed(seqno, this_seqno))
+				seqno = this_seqno;
 		}
 
 		/*
@@ -1606,15 +1632,25 @@ try_again:
 		 * objects to finish before trying again.
 		 */
 		if (i == dev_priv->num_fence_regs) {
-			ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0);
-			if (ret) {
-				WARN(ret != -ERESTARTSYS,
-				     "switch to GTT domain failed: %d\n", ret);
-				return ret;
+			if (seqno == dev_priv->mm.next_gem_seqno) {
+				i915_gem_flush(dev,
+					       I915_GEM_GPU_DOMAINS,
+					       I915_GEM_GPU_DOMAINS);
+				seqno = i915_add_request(dev,
+							 I915_GEM_GPU_DOMAINS);
+				if (seqno == 0)
+					return -ENOMEM;
 			}
+
+			ret = i915_wait_request(dev, seqno);
+			if (ret)
+				return ret;
 			goto try_again;
 		}
 
+		BUG_ON(old_obj_priv->active ||
+		       (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
+
 		/*
 		 * Zap this virtual mapping so we can set up a fence again
 		 * for this object next time we need it.
@@ -1655,8 +1691,17 @@ i915_gem_clear_fence_reg(struct drm_gem_object *obj)
 
 	if (IS_I965G(dev))
 		I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
-	else
-		I915_WRITE(FENCE_REG_830_0 + (obj_priv->fence_reg * 4), 0);
+	else {
+		uint32_t fence_reg;
+
+		if (obj_priv->fence_reg < 8)
+			fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+		else
+			fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
+						       8) * 4;
+
+		I915_WRITE(fence_reg, 0);
+	}
 
 	dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
 	obj_priv->fence_reg = I915_FENCE_REG_NONE;
@@ -2469,6 +2514,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	struct drm_i915_gem_exec_object *exec_list = NULL;
 	struct drm_gem_object **object_list = NULL;
 	struct drm_gem_object *batch_obj;
+	struct drm_i915_gem_object *obj_priv;
 	int ret, i, pinned = 0;
 	uint64_t exec_offset;
 	uint32_t seqno, flush_domains;
@@ -2533,6 +2579,15 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 			ret = -EBADF;
 			goto err;
 		}
+
+		obj_priv = object_list[i]->driver_private;
+		if (obj_priv->in_execbuffer) {
+			DRM_ERROR("Object %p appears more than once in object list\n",
+				   object_list[i]);
+			ret = -EBADF;
+			goto err;
+		}
+		obj_priv->in_execbuffer = true;
 	}
 
 	/* Pin and relocate */
@@ -2674,8 +2729,13 @@ err:
 	for (i = 0; i < pinned; i++)
 		i915_gem_object_unpin(object_list[i]);
 
-	for (i = 0; i < args->buffer_count; i++)
+	for (i = 0; i < args->buffer_count; i++) {
+		if (object_list[i]) {
+			obj_priv = object_list[i]->driver_private;
+			obj_priv->in_execbuffer = false;
+		}
 		drm_gem_object_unreference(object_list[i]);
+	}
 
 	mutex_unlock(&dev->struct_mutex);
 
@@ -2712,17 +2772,24 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 		ret = i915_gem_object_bind_to_gtt(obj, alignment);
 		if (ret != 0) {
 			if (ret != -EBUSY && ret != -ERESTARTSYS)
-				DRM_ERROR("Failure to bind: %d", ret);
+				DRM_ERROR("Failure to bind: %d\n", ret);
+			return ret;
+		}
+	}
+	/*
+	 * Pre-965 chips need a fence register set up in order to
+	 * properly handle tiled surfaces.
+	 */
+	if (!IS_I965G(dev) &&
+	    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+	    obj_priv->tiling_mode != I915_TILING_NONE) {
+		ret = i915_gem_object_get_fence_reg(obj, true);
+		if (ret != 0) {
+			if (ret != -EBUSY && ret != -ERESTARTSYS)
+				DRM_ERROR("Failure to install fence: %d\n",
+					  ret);
 			return ret;
 		}
-		/*
-		 * Pre-965 chips need a fence register set up in order to
-		 * properly handle tiled surfaces.
-		 */
-		if (!IS_I965G(dev) &&
-		    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
-		    obj_priv->tiling_mode != I915_TILING_NONE)
-			i915_gem_object_get_fence_reg(obj, true);
 	}
 	obj_priv->pin_count++;
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9d6539a868b..90600d89941 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -184,6 +184,7 @@
  * Fence registers
  */
 #define FENCE_REG_830_0			0x2000
+#define FENCE_REG_945_8			0x3000
 #define   I830_FENCE_START_MASK		0x07f80000
 #define   I830_FENCE_TILING_Y_SHIFT	12
 #define   I830_FENCE_SIZE_BITS(size)	((ffs((size) >> 19) - 1) << 8)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5d84027ee8f..d669cc2b42c 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -119,11 +119,6 @@ static void i915_save_vga(struct drm_device *dev)
 
 	/* VGA color palette registers */
 	dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK);
-	/* DACCRX automatically increments during read */
-	I915_WRITE8(VGA_DACRX, 0);
-	/* Read 3 bytes of color data from each index */
-	for (i = 0; i < 256 * 3; i++)
-		dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA);
 
 	/* MSR bits */
 	dev_priv->saveMSR = I915_READ8(VGA_MSR_READ);
@@ -225,12 +220,6 @@ static void i915_restore_vga(struct drm_device *dev)
 
 	/* VGA color palette registers */
 	I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
-	/* DACCRX automatically increments during read */
-	I915_WRITE8(VGA_DACWX, 0);
-	/* Read 3 bytes of color data from each index */
-	for (i = 0; i < 256 * 3; i++)
-		I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]);
-
 }
 
 int i915_save_state(struct drm_device *dev)
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 4940e4d70c2..1f5b5d4c3c3 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -306,7 +306,7 @@ static int hiddev_open(struct inode *inode, struct file *file)
 	return 0;
 bail:
 	file->private_data = NULL;
-	kfree(list->hiddev);
+	kfree(list);
 	return res;
 }
 
@@ -323,7 +323,7 @@ static ssize_t hiddev_write(struct file * file, const char __user * buffer, size
  */
 static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t count, loff_t *ppos)
 {
-	DECLARE_WAITQUEUE(wait, current);
+	DEFINE_WAIT(wait);
 	struct hiddev_list *list = file->private_data;
 	int event_size;
 	int retval;
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b84bf066879..b4eea0292c1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -543,8 +543,8 @@ config SENSORS_LM90
 	help
 	  If you say yes here you get support for National Semiconductor LM90,
 	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
-	  MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
-	  MAX6681 sensor chips.
+	  MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+	  MAX6680, MAX6681 and MAX6692 sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index e52b38806d0..ad2b3431b72 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -760,8 +760,11 @@ static int abituguru3_read_increment_offset(struct abituguru3_data *data,
 
 	for (i = 0; i < offset_count; i++)
 		if ((x = abituguru3_read(data, bank, offset + i, count,
-				buf + i * count)) != count)
-			return i * count + (i && (x < 0)) ? 0 : x;
+				buf + i * count)) != count) {
+			if (x < 0)
+				return x;
+			return i * count + x;
+		}
 
 	return i * count;
 }
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 1692de36996..18a1ba88816 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -617,7 +617,7 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data,
 static int f75375_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
-	struct f75375_data *data = i2c_get_clientdata(client);
+	struct f75375_data *data;
 	struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
 	int err;
 
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 95a99c590da..9157247fed8 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -213,7 +213,7 @@ static inline u16 FAN16_TO_REG(long rpm)
 
 #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
 					((val)+500)/1000),-128,127))
-#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+#define TEMP_FROM_REG(val) ((val) * 1000)
 
 #define PWM_TO_REG(val)   ((val) >> 1)
 #define PWM_FROM_REG(val) (((val)&0x7f) << 1)
@@ -267,9 +267,9 @@ struct it87_data {
 	u8 has_fan;		/* Bitfield, fans enabled */
 	u16 fan[5];		/* Register values, possibly combined */
 	u16 fan_min[5];		/* Register values, possibly combined */
-	u8 temp[3];		/* Register value */
-	u8 temp_high[3];	/* Register value */
-	u8 temp_low[3];		/* Register value */
+	s8 temp[3];		/* Register value */
+	s8 temp_high[3];	/* Register value */
+	s8 temp_low[3];		/* Register value */
 	u8 sensor;		/* Register value */
 	u8 fan_div[3];		/* Register encoding, shifted right */
 	u8 vid;			/* Register encoding, combined */
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index cfc1ee90f5a..b251d8674b4 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -72,6 +72,7 @@ I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100,
 #define	LM85_COMPANY_SMSC		0x5c
 #define	LM85_VERSTEP_VMASK              0xf0
 #define	LM85_VERSTEP_GENERIC		0x60
+#define	LM85_VERSTEP_GENERIC2		0x70
 #define	LM85_VERSTEP_LM85C		0x60
 #define	LM85_VERSTEP_LM85B		0x62
 #define	LM85_VERSTEP_ADM1027		0x60
@@ -334,6 +335,7 @@ static struct lm85_data *lm85_update_device(struct device *dev);
 static const struct i2c_device_id lm85_id[] = {
 	{ "adm1027", adm1027 },
 	{ "adt7463", adt7463 },
+	{ "adt7468", adt7468 },
 	{ "lm85", any_chip },
 	{ "lm85b", lm85b },
 	{ "lm85c", lm85c },
@@ -408,7 +410,8 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
 	struct lm85_data *data = lm85_update_device(dev);
 	int vid;
 
-	if (data->type == adt7463 && (data->vid & 0x80)) {
+	if ((data->type == adt7463 || data->type == adt7468) &&
+	    (data->vid & 0x80)) {
 		/* 6-pin VID (VRM 10) */
 		vid = vid_from_reg(data->vid & 0x3f, data->vrm);
 	} else {
@@ -1153,7 +1156,8 @@ static int lm85_detect(struct i2c_client *client, int kind,
 			address, company, verstep);
 
 		/* All supported chips have the version in common */
-		if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC) {
+		if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+		    (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
 			dev_dbg(&adapter->dev, "Autodetection failed: "
 				"unsupported version\n");
 			return -ENODEV;
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 96a70186672..1aff7575799 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -32,10 +32,10 @@
  * supported by this driver. These chips lack the remote temperature
  * offset feature.
  *
- * This driver also supports the MAX6646, MAX6647 and MAX6649 chips
- * made by Maxim.  These are again similar to the LM86, but they use
- * unsigned temperature values and can report temperatures from 0 to
- * 145 degrees.
+ * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
+ * MAX6692 chips made by Maxim.  These are again similar to the LM86,
+ * but they use unsigned temperature values and can report temperatures
+ * from 0 to 145 degrees.
  *
  * This driver also supports the MAX6680 and MAX6681, two other sensor
  * chips made by Maxim. These are quite similar to the other Maxim
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 9aefb5e5864..86796488ef4 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -15,9 +15,9 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/hardware/ioc.h>
 #include <asm/system.h>
 
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index be8ee2cac8b..ece0125a1ee 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -193,22 +193,24 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 
 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 {
-	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
-		dev->iclk = clk_get(dev->dev, "i2c_ick");
-		if (IS_ERR(dev->iclk)) {
-			dev->iclk = NULL;
-			return -ENODEV;
-		}
+	int ret;
+
+	dev->iclk = clk_get(dev->dev, "ick");
+	if (IS_ERR(dev->iclk)) {
+		ret = PTR_ERR(dev->iclk);
+		dev->iclk = NULL;
+		return ret;
 	}
 
-	dev->fclk = clk_get(dev->dev, "i2c_fck");
+	dev->fclk = clk_get(dev->dev, "fck");
 	if (IS_ERR(dev->fclk)) {
+		ret = PTR_ERR(dev->fclk);
 		if (dev->iclk != NULL) {
 			clk_put(dev->iclk);
 			dev->iclk = NULL;
 		}
 		dev->fclk = NULL;
-		return -ENODEV;
+		return ret;
 	}
 
 	return 0;
@@ -218,18 +220,15 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 {
 	clk_put(dev->fclk);
 	dev->fclk = NULL;
-	if (dev->iclk != NULL) {
-		clk_put(dev->iclk);
-		dev->iclk = NULL;
-	}
+	clk_put(dev->iclk);
+	dev->iclk = NULL;
 }
 
 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 {
 	WARN_ON(!dev->idle);
 
-	if (dev->iclk != NULL)
-		clk_enable(dev->iclk);
+	clk_enable(dev->iclk);
 	clk_enable(dev->fclk);
 	dev->idle = 0;
 	if (dev->iestate)
@@ -254,8 +253,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 	}
 	dev->idle = 1;
 	clk_disable(dev->fclk);
-	if (dev->iclk != NULL)
-		clk_disable(dev->iclk);
+	clk_disable(dev->iclk);
 }
 
 static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -312,15 +310,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 
 	if (cpu_class_is_omap1()) {
-		struct clk *armxor_ck;
-
-		armxor_ck = clk_get(NULL, "armxor_ck");
-		if (IS_ERR(armxor_ck))
-			dev_warn(dev->dev, "Could not get armxor_ck\n");
-		else {
-			fclk_rate = clk_get_rate(armxor_ck);
-			clk_put(armxor_ck);
-		}
+		/*
+		 * The I2C functional clock is the armxor_ck, so there's
+		 * no need to get "armxor_ck" separately.  Now, if OMAP2420
+		 * always returns 12MHz for the functional clock, we can
+		 * do this bit unconditionally.
+		 */
+		fclk_rate = clk_get_rate(dev->fclk);
+
 		/* TRM for 5912 says the I2C clock must be prescaled to be
 		 * between 7 - 12 MHz. The XOR input clock is typically
 		 * 12, 13 or 19.2 MHz. So we should have code that produces:
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 4678babd3ce..fede619ba22 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -102,7 +102,13 @@ static int i2c_versatile_probe(struct platform_device *dev)
 	i2c->algo = i2c_versatile_algo;
 	i2c->algo.data = i2c;
 
-	ret = i2c_bit_add_bus(&i2c->adap);
+	if (dev->id >= 0) {
+		/* static bus numbering */
+		i2c->adap.nr = dev->id;
+		ret = i2c_bit_add_numbered_bus(&i2c->adap);
+	} else
+		/* dynamic bus numbering */
+		ret = i2c_bit_add_bus(&i2c->adap);
 	if (ret >= 0) {
 		platform_set_drvdata(dev, i2c);
 		return 0;
@@ -146,7 +152,7 @@ static void __exit i2c_versatile_exit(void)
 	platform_driver_unregister(&i2c_versatile_driver);
 }
 
-module_init(i2c_versatile_init);
+subsys_initcall(i2c_versatile_init);
 module_exit(i2c_versatile_exit);
 
 MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e072903b12f..5ea3bfad172 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -721,6 +721,11 @@ config BLK_DEV_IDE_TX4939
 	depends on SOC_TX4939
 	select BLK_DEV_IDEDMA_SFF
 
+config BLK_DEV_IDE_AT91
+	tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
+	depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+	select IDE_TIMINGS
+
 config IDE_ARM
 	tristate "ARM IDE support"
 	depends on ARM && (ARCH_RPC || ARCH_SHARK)
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index d0e3d7d5b46..1c326d94aa6 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -116,3 +116,4 @@ obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
 
 obj-$(CONFIG_BLK_DEV_IDE_TX4938)	+= tx4938ide.o
 obj-$(CONFIG_BLK_DEV_IDE_TX4939)	+= tx4939ide.o
+obj-$(CONFIG_BLK_DEV_IDE_AT91)		+= at91_ide.o
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
new file mode 100644
index 00000000000..1bb50f46388
--- /dev/null
+++ b/drivers/ide/at91_ide.c
@@ -0,0 +1,467 @@
+/*
+ * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
+ * with Compact Flash True IDE logic
+ *
+ * Copyright (c) 2008, 2009 Kelvatek Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ide.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9263_matrix.h>
+
+#define DRV_NAME "at91_ide"
+
+#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
+#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
+
+/*
+ * Access to IDE device is possible through EBI Static Memory Controller
+ * with Compact Flash logic. For details see EBI and SMC datasheet sections
+ * of any microcontroller from AT91SAM9 family.
+ *
+ * Within SMC chip select address space, lines A[23:21] distinguish Compact
+ * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
+ *   0x00c0000 - True IDE
+ *   0x00e0000 - Alternate True IDE (Alt Status Register)
+ *
+ * On True IDE mode Task File and Data Register are mapped at the same address.
+ * To distinguish access between these two different bus data width is used:
+ * 8Bit for Task File, 16Bit for Data I/O.
+ *
+ * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
+ * only inside IDE callback routines which are serialized by IDE layer,
+ * so no additional locking needed.
+ */
+
+#define TASK_FILE	0x00c00000
+#define ALT_MODE	0x00e00000
+#define REGS_SIZE	8
+
+#define enter_16bit(cs, mode) do {					\
+	mode = at91_sys_read(AT91_SMC_MODE(cs));			\
+	at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16);	\
+} while (0)
+
+#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
+
+static void set_smc_timings(const u8 chipselect, const u16 cycle,
+			    const u16 setup, const u16 pulse,
+			    const u16 data_float, int use_iordy)
+{
+	unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+			     AT91_SMC_BAT_SELECT;
+
+	/* disable or enable waiting for IORDY signal */
+	if (use_iordy)
+		mode |= AT91_SMC_EXNWMODE_READY;
+
+	/* add data float cycles if needed */
+	if (data_float)
+		mode |= AT91_SMC_TDF_(data_float);
+
+	at91_sys_write(AT91_SMC_MODE(chipselect), mode);
+
+	/* setup timings in SMC */
+	at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
+						   AT91_SMC_NCS_WRSETUP_(0) |
+						   AT91_SMC_NRDSETUP_(setup) |
+						   AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
+						   AT91_SMC_NCS_WRPULSE_(cycle) |
+						   AT91_SMC_NRDPULSE_(pulse) |
+						   AT91_SMC_NCS_RDPULSE_(cycle));
+	at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
+						   AT91_SMC_NRDCYCLE_(cycle));
+}
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+	u64 tmp = ns;
+
+	tmp *= mck_hz;
+	tmp += 1000*1000*1000 - 1; /* round up */
+	do_div(tmp, 1000*1000*1000);
+	return (unsigned int) tmp;
+}
+
+static void apply_timings(const u8 chipselect, const u8 pio,
+			  const struct ide_timing *timing, int use_iordy)
+{
+	unsigned int t0, t1, t2, t6z;
+	unsigned int cycle, setup, pulse, data_float;
+	unsigned int mck_hz;
+	struct clk *mck;
+
+	/* see table 22 of Compact Flash standard 4.1 for the meaning,
+	 * we do not stretch active (t2) time, so setup (t1) + hold time (th)
+	 * assure at least minimal recovery (t2i) time */
+	t0 = timing->cyc8b;
+	t1 = timing->setup;
+	t2 = timing->act8b;
+	t6z = (pio < 5) ? 30 : 20;
+
+	pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
+
+	mck = clk_get(NULL, "mck");
+	BUG_ON(IS_ERR(mck));
+	mck_hz = clk_get_rate(mck);
+	pdbg("mck_hz=%u\n", mck_hz);
+
+	cycle = calc_mck_cycles(t0, mck_hz);
+	setup = calc_mck_cycles(t1, mck_hz);
+	pulse = calc_mck_cycles(t2, mck_hz);
+	data_float = calc_mck_cycles(t6z, mck_hz);
+
+	pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
+	     cycle, setup, pulse, data_float);
+
+	set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
+}
+
+static void at91_ide_input_data(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	u8 chipselect = hwif->select_data;
+	unsigned long mode;
+
+	pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+	len++;
+
+	enter_16bit(chipselect, mode);
+	__ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2);
+	leave_16bit(chipselect, mode);
+}
+
+static void at91_ide_output_data(ide_drive_t *drive, struct request *rq,
+				 void *buf, unsigned int len)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	u8 chipselect = hwif->select_data;
+	unsigned long mode;
+
+	pdbg("cs %u buf %p len %d\n", chipselect,  buf, len);
+
+	enter_16bit(chipselect, mode);
+	__ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2);
+	leave_16bit(chipselect, mode);
+}
+
+static u8 ide_mm_inb(unsigned long port)
+{
+	return readb((void __iomem *) port);
+}
+
+static void ide_mm_outb(u8 value, unsigned long port)
+{
+	writeb(value, (void __iomem *) port);
+}
+
+static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+		u16 data = (tf->hob_data << 8) | tf->data;
+
+		at91_ide_output_data(drive, NULL, &data, 2);
+	}
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		ide_mm_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		ide_mm_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		ide_mm_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		ide_mm_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		ide_mm_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
+}
+
+static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data;
+
+		at91_ide_input_data(drive, NULL, &data, 2);
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = ide_mm_inb(io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = ide_mm_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = ide_mm_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = ide_mm_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = ide_mm_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = ide_mm_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature = ide_mm_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = ide_mm_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = ide_mm_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = ide_mm_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = ide_mm_inb(io_ports->lbah_addr);
+	}
+}
+
+static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	struct ide_timing *timing;
+	u8 chipselect = drive->hwif->select_data;
+	int use_iordy = 0;
+
+	pdbg("chipselect %u pio %u\n", chipselect, pio);
+
+	timing = ide_timing_find_mode(XFER_PIO_0 + pio);
+	BUG_ON(!timing);
+
+	if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
+	    !(ata_id_is_cfa(drive->id) && pio > 4))
+		use_iordy = 1;
+
+	apply_timings(chipselect, pio, timing, use_iordy);
+}
+
+static const struct ide_tp_ops at91_ide_tp_ops = {
+	.exec_command	= ide_exec_command,
+	.read_status	= ide_read_status,
+	.read_altstatus	= ide_read_altstatus,
+	.set_irq	= ide_set_irq,
+
+	.tf_load	= at91_ide_tf_load,
+	.tf_read	= at91_ide_tf_read,
+
+	.input_data	= at91_ide_input_data,
+	.output_data	= at91_ide_output_data,
+};
+
+static const struct ide_port_ops at91_ide_port_ops = {
+	.set_pio_mode	= at91_ide_set_pio_mode,
+};
+
+static const struct ide_port_info at91_ide_port_info __initdata = {
+	.port_ops	= &at91_ide_port_ops,
+	.tp_ops		= &at91_ide_tp_ops,
+	.host_flags 	= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
+			  IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
+	.pio_mask 	= ATA_PIO5,
+};
+
+/*
+ * If interrupt is delivered through GPIO, IRQ are triggered on falling
+ * and rising edge of signal. Whereas IDE device request interrupt on high
+ * level (rising edge in our case). This mean we have fake interrupts, so
+ * we need to check interrupt pin and exit instantly from ISR when line
+ * is on low level.
+ */
+
+irqreturn_t at91_irq_handler(int irq, void *dev_id)
+{
+	int ntries = 8;
+	int pin_val1, pin_val2;
+
+	/* additional deglitch, line can be noisy in badly designed PCB */
+	do {
+		pin_val1 = at91_get_gpio_value(irq);
+		pin_val2 = at91_get_gpio_value(irq);
+	} while (pin_val1 != pin_val2 && --ntries > 0);
+
+	if (pin_val1 == 0 || ntries <= 0)
+		return IRQ_HANDLED;
+
+	return ide_intr(irq, dev_id);
+}
+
+static int __init at91_ide_probe(struct platform_device *pdev)
+{
+	int ret;
+	hw_regs_t hw;
+	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_host *host;
+	struct resource *res;
+	unsigned long tf_base = 0, ctl_base = 0;
+	struct at91_cf_data *board = pdev->dev.platform_data;
+
+	if (!board)
+		return -ENODEV;
+
+	if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
+		perr("no device detected\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		perr("can't get memory resource\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
+				     REGS_SIZE, "ide") ||
+	    !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
+				     REGS_SIZE, "alt")) {
+		perr("memory resources in use\n");
+		return -EBUSY;
+	}
+
+	pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
+	     board->irq_pin, (unsigned long) res->start);
+
+	tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
+					       REGS_SIZE);
+	ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
+						REGS_SIZE);
+	if (!tf_base || !ctl_base) {
+		perr("can't map memory regions\n");
+		return -EBUSY;
+	}
+
+	memset(&hw, 0, sizeof(hw));
+
+	if (board->flags & AT91_IDE_SWAP_A0_A2) {
+		/* workaround for stupid hardware bug */
+		hw.io_ports.data_addr	= tf_base + 0;
+		hw.io_ports.error_addr	= tf_base + 4;
+		hw.io_ports.nsect_addr	= tf_base + 2;
+		hw.io_ports.lbal_addr	= tf_base + 6;
+		hw.io_ports.lbam_addr	= tf_base + 1;
+		hw.io_ports.lbah_addr	= tf_base + 5;
+		hw.io_ports.device_addr = tf_base + 3;
+		hw.io_ports.command_addr = tf_base + 7;
+		hw.io_ports.ctl_addr	= ctl_base + 3;
+	} else
+		ide_std_init_ports(&hw, tf_base, ctl_base + 6);
+
+	hw.irq = board->irq_pin;
+	hw.chipset = ide_generic;
+	hw.dev = &pdev->dev;
+
+	host = ide_host_alloc(&at91_ide_port_info, hws);
+	if (!host) {
+		perr("failed to allocate ide host\n");
+		return -ENOMEM;
+	}
+
+	/* setup Static Memory Controller - PIO 0 as default */
+	apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
+
+	/* with GPIO interrupt we have to do quirks in handler */
+	if (board->irq_pin >= PIN_BASE)
+		host->irq_handler = at91_irq_handler;
+
+	host->ports[0]->select_data = board->chipselect;
+
+	ret = ide_host_register(host, &at91_ide_port_info, hws);
+	if (ret) {
+		perr("failed to register ide host\n");
+		goto err_free_host;
+	}
+	platform_set_drvdata(pdev, host);
+	return 0;
+
+err_free_host:
+	ide_host_free(host);
+	return ret;
+}
+
+static int __exit at91_ide_remove(struct platform_device *pdev)
+{
+	struct ide_host *host = platform_get_drvdata(pdev);
+
+	ide_host_remove(host);
+	return 0;
+}
+
+static struct platform_driver at91_ide_driver = {
+	.driver	= {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.remove	= __exit_p(at91_ide_remove),
+};
+
+static int __init at91_ide_init(void)
+{
+	return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
+}
+
+static void __exit at91_ide_exit(void)
+{
+	platform_driver_unregister(&at91_ide_driver);
+}
+
+module_init(at91_ide_init);
+module_exit(at91_ide_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
+
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index e96c0126059..e9d042dba0e 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -140,6 +140,12 @@ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
 	rq->cmd_flags |= REQ_PREEMPT;
 	rq->buffer = (char *)pc;
 	rq->rq_disk = disk;
+
+	if (pc->req_xfer) {
+		rq->data = pc->buf;
+		rq->data_len = pc->req_xfer;
+	}
+
 	memcpy(rq->cmd, pc->c, 12);
 	if (drive->media == ide_tape)
 		rq->cmd[13] = REQ_IDETAPE_PC1;
@@ -159,6 +165,12 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->buffer = (char *)pc;
+
+	if (pc->req_xfer) {
+		rq->data = pc->buf;
+		rq->data_len = pc->req_xfer;
+	}
+
 	memcpy(rq->cmd, pc->c, 12);
 	if (drive->media == ide_tape)
 		rq->cmd[13] = REQ_IDETAPE_PC1;
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
index 1146f4204c6..1f86dcbd2b1 100644
--- a/drivers/ide/ide-disk_proc.c
+++ b/drivers/ide/ide-disk_proc.c
@@ -125,5 +125,5 @@ const struct ide_proc_devset ide_disk_settings[] = {
 	IDE_PROC_DEVSET(multcount,	0,    16),
 	IDE_PROC_DEVSET(nowerr,		0,     1),
 	IDE_PROC_DEVSET(wcache,		0,     1),
-	{ 0 },
+	{ NULL },
 };
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 72ebab0bc75..059c90bb5ad 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -128,6 +128,7 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
+	int i;
 
 	ide_map_sg(drive, rq);
 
@@ -136,8 +137,13 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
 	else
 		hwif->sg_dma_direction = DMA_TO_DEVICE;
 
-	return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
-			  hwif->sg_dma_direction);
+	i = dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction);
+	if (i) {
+		hwif->orig_sg_nents = hwif->sg_nents;
+		hwif->sg_nents = i;
+	}
+
+	return i;
 }
 EXPORT_SYMBOL_GPL(ide_build_sglist);
 
@@ -156,7 +162,7 @@ void ide_destroy_dmatable(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 
-	dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
+	dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->orig_sg_nents,
 		     hwif->sg_dma_direction);
 }
 EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 3eab1c6c9b3..317ec62c33d 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -327,8 +327,10 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
 		return ide_stopped;
 	}
 
-	ide_init_sg_cmd(drive, rq);
-	ide_map_sg(drive, rq);
+	if (blk_fs_request(rq) || pc->req_xfer) {
+		ide_init_sg_cmd(drive, rq);
+		ide_map_sg(drive, rq);
+	}
 
 	pc->sg = hwif->sg_table;
 	pc->sg_cnt = hwif->sg_nents;
diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c
index 3ec762cb60a..fcd4d8153df 100644
--- a/drivers/ide/ide-floppy_proc.c
+++ b/drivers/ide/ide-floppy_proc.c
@@ -29,5 +29,5 @@ const struct ide_proc_devset ide_floppy_settings[] = {
 	IDE_PROC_DEVSET(bios_head, 0,  255),
 	IDE_PROC_DEVSET(bios_sect, 0,   63),
 	IDE_PROC_DEVSET(ticks,	   0,  255),
-	{ 0 },
+	{ NULL },
 };
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 9ee51adf567..a9a6c208288 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -908,7 +908,7 @@ void ide_timer_expiry (unsigned long data)
 	ide_drive_t	*uninitialized_var(drive);
 	ide_handler_t	*handler;
 	unsigned long	flags;
-	unsigned long	wait = -1;
+	int		wait = -1;
 	int		plug_device = 0;
 
 	spin_lock_irqsave(&hwif->lock, flags);
@@ -1162,6 +1162,7 @@ out_early:
 
 	return irq_ret;
 }
+EXPORT_SYMBOL_GPL(ide_intr);
 
 /**
  *	ide_do_drive_cmd	-	issue IDE special command
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 753b92ebe0a..b1892bd95c6 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -315,6 +315,8 @@ void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf,
 	u8 io_32bit = drive->io_32bit;
 	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
 
+	len++;
+
 	if (io_32bit) {
 		unsigned long uninitialized_var(flags);
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index ce0818a993f..ee8e3e7cad5 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -950,6 +950,7 @@ static int ide_port_setup_devices(ide_hwif_t *hwif)
 static int init_irq (ide_hwif_t *hwif)
 {
 	struct ide_io_ports *io_ports = &hwif->io_ports;
+	irq_handler_t irq_handler;
 	int sa = 0;
 
 	mutex_lock(&ide_cfg_mtx);
@@ -959,6 +960,10 @@ static int init_irq (ide_hwif_t *hwif)
 	hwif->timer.function = &ide_timer_expiry;
 	hwif->timer.data = (unsigned long)hwif;
 
+	irq_handler = hwif->host->irq_handler;
+	if (irq_handler == NULL)
+		irq_handler = ide_intr;
+
 #if defined(__mc68000__)
 	sa = IRQF_SHARED;
 #endif /* __mc68000__ */
@@ -969,7 +974,7 @@ static int init_irq (ide_hwif_t *hwif)
 	if (io_ports->ctl_addr)
 		hwif->tp_ops->set_irq(hwif, 1);
 
-	if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif))
+	if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
 		goto out_up;
 
 	if (!hwif->rqsize) {
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 1d8978b3314..a7b9287ee0d 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -231,7 +231,7 @@ static const struct ide_proc_devset ide_generic_settings[] = {
 	IDE_PROC_DEVSET(pio_mode, 0, 255),
 	IDE_PROC_DEVSET(unmaskirq, 0, 1),
 	IDE_PROC_DEVSET(using_dma, 0, 1),
-	{ 0 },
+	{ NULL },
 };
 
 static void proc_ide_settings_warn(void)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index bb450a7608c..4e6181c7bbd 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2166,7 +2166,7 @@ static const struct ide_proc_devset idetape_settings[] = {
 	__IDE_PROC_DEVSET(speed,	0, 0xffff, NULL, NULL),
 	__IDE_PROC_DEVSET(tdsc,		IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
 					mulf_tdsc, divf_tdsc),
-	{ 0 },
+	{ NULL },
 };
 #endif
 
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index a01b4488208..4a65b96db2c 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -2490,12 +2490,14 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt)
 	int ret = 0;
 	struct nes_vnic *nesvnic;
 	struct nes_device *nesdev;
+	struct nes_ib_device *nesibdev;
 
 	nesvnic = to_nesvnic(nesqp->ibqp.device);
 	if (!nesvnic)
 		return -EINVAL;
 
 	nesdev = nesvnic->nesdev;
+	nesibdev = nesvnic->nesibdev;
 
 	nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n",
 			atomic_read(&nesvnic->netdev->refcnt));
@@ -2507,6 +2509,8 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt)
 	} else {
 		/* Need to free the Last Streaming Mode Message */
 		if (nesqp->ietf_frame) {
+			if (nesqp->lsmm_mr)
+				nesibdev->ibdev.dereg_mr(nesqp->lsmm_mr);
 			pci_free_consistent(nesdev->pcidev,
 					nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
 					nesqp->ietf_frame, nesqp->ietf_frame_pbase);
@@ -2543,6 +2547,12 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	u32 crc_value;
 	int ret;
 	int passive_state;
+	struct nes_ib_device *nesibdev;
+	struct ib_mr *ibmr = NULL;
+	struct ib_phys_buf ibphysbuf;
+	struct nes_pd *nespd;
+
+
 
 	ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
 	if (!ibqp)
@@ -2601,6 +2611,26 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	if (cm_id->remote_addr.sin_addr.s_addr !=
 			cm_id->local_addr.sin_addr.s_addr) {
 		u64temp = (unsigned long)nesqp;
+		nesibdev = nesvnic->nesibdev;
+		nespd = nesqp->nespd;
+		ibphysbuf.addr = nesqp->ietf_frame_pbase;
+		ibphysbuf.size = conn_param->private_data_len +
+					sizeof(struct ietf_mpa_frame);
+		ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd,
+						&ibphysbuf, 1,
+						IB_ACCESS_LOCAL_WRITE,
+						(u64 *)&nesqp->ietf_frame);
+		if (!ibmr) {
+			nes_debug(NES_DBG_CM, "Unable to register memory region"
+					"for lSMM for cm_node = %p \n",
+					cm_node);
+			return -ENOMEM;
+		}
+
+		ibmr->pd = &nespd->ibpd;
+		ibmr->device = nespd->ibpd.device;
+		nesqp->lsmm_mr = ibmr;
+
 		u64temp |= NES_SW_CONTEXT_ALIGN>>1;
 		set_wqe_64bit_value(wqe->wqe_words,
 			NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
@@ -2611,14 +2641,13 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
 			cpu_to_le32(conn_param->private_data_len +
 			sizeof(struct ietf_mpa_frame));
-		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
-			cpu_to_le32((u32)nesqp->ietf_frame_pbase);
-		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
-			cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
+		set_wqe_64bit_value(wqe->wqe_words,
+					NES_IWARP_SQ_WQE_FRAG0_LOW_IDX,
+					(u64)nesqp->ietf_frame);
 		wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
 			cpu_to_le32(conn_param->private_data_len +
 			sizeof(struct ietf_mpa_frame));
-		wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = ibmr->lkey;
 
 		nesqp->nesqp_context->ird_ord_sizes |=
 			cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 4fdb72454f9..d93a6562817 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1360,8 +1360,10 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd,
 					NES_QPCONTEXT_MISC_RQ_SIZE_SHIFT);
 			nesqp->nesqp_context->misc |= cpu_to_le32((u32)nesqp->hwqp.sq_encoded_size <<
 					NES_QPCONTEXT_MISC_SQ_SIZE_SHIFT);
+			if (!udata) {
 				nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_PRIV_EN);
 				nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_FAST_REGISTER_EN);
+			}
 			nesqp->nesqp_context->cqs = cpu_to_le32(nesqp->nesscq->hw_cq.cq_number +
 					((u32)nesqp->nesrcq->hw_cq.cq_number << 16));
 			u64temp = (u64)nesqp->hwqp.sq_pbase;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h
index 6c6b4da5184..ae0ca9bc83b 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.h
+++ b/drivers/infiniband/hw/nes/nes_verbs.h
@@ -134,6 +134,7 @@ struct nes_qp {
 	struct ietf_mpa_frame *ietf_frame;
 	dma_addr_t            ietf_frame_pbase;
 	wait_queue_head_t     state_waitq;
+	struct ib_mr          *lsmm_mr;
 	unsigned long         socket;
 	struct nes_hw_qp      hwqp;
 	struct work_struct    work;
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index abb04c82c62..634af6a8e6b 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -21,8 +21,6 @@
 #include <linux/slab.h>
 
 #include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include <asm/hardware/scoop.h>
 
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 9d1781a618e..13967422658 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -21,8 +21,6 @@
 #include <linux/slab.h>
 
 #include <mach/spitz.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 
 #define KB_ROWS			7
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 56c079ef501..272deddc8db 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -22,10 +22,10 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/hardware/iomd.h>
 
 MODULE_AUTHOR("Vojtech Pavlik, Russell King");
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 7f36edd34f8..ed045c99f84 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -33,10 +33,10 @@
 #include <linux/serio.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/hardware/iomd.h>
 #include <asm/system.h>
 
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 3fb51b54fe6..94a1919d439 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -21,7 +21,6 @@
 
 #include <mach/sharpsl.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 
 
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 18dd8aacbe8..831ddce1467 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -46,6 +46,9 @@ MODULE_PARM_DESC(cidmode, "Call-ID mode");
 /* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
 #define IF_WRITEBUF 264
 
+/* interrupt pipe message size according to ibid. ch. 2.2 */
+#define IP_MSGSIZE 3
+
 /* Values for the Gigaset 307x */
 #define USB_GIGA_VENDOR_ID      0x0681
 #define USB_3070_PRODUCT_ID     0x0001
@@ -110,7 +113,7 @@ struct bas_cardstate {
 	unsigned char		*rcvbuf;	/* AT reply receive buffer */
 
 	struct urb		*urb_int_in;	/* URB for interrupt pipe */
-	unsigned char		int_in_buf[3];
+	unsigned char		*int_in_buf;
 
 	spinlock_t		lock;		/* locks all following */
 	int			basstate;	/* bitmap (BS_*) */
@@ -657,7 +660,7 @@ static void read_int_callback(struct urb *urb)
 	}
 
 	/* drop incomplete packets even if the missing bytes wouldn't matter */
-	if (unlikely(urb->actual_length < 3)) {
+	if (unlikely(urb->actual_length < IP_MSGSIZE)) {
 		dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
 			 urb->actual_length);
 		goto resubmit;
@@ -2127,6 +2130,7 @@ static void gigaset_reinitbcshw(struct bc_state *bcs)
 static void gigaset_freecshw(struct cardstate *cs)
 {
 	/* timers, URBs and rcvbuf are disposed of in disconnect */
+	kfree(cs->hw.bas->int_in_buf);
 	kfree(cs->hw.bas);
 	cs->hw.bas = NULL;
 }
@@ -2140,6 +2144,12 @@ static int gigaset_initcshw(struct cardstate *cs)
 		pr_err("out of memory\n");
 		return 0;
 	}
+	ucs->int_in_buf = kmalloc(IP_MSGSIZE, GFP_KERNEL);
+	if (!ucs->int_in_buf) {
+		kfree(ucs);
+		pr_err("out of memory\n");
+		return 0;
+	}
 
 	ucs->urb_cmd_in = NULL;
 	ucs->urb_cmd_out = NULL;
@@ -2292,7 +2302,7 @@ static int gigaset_probe(struct usb_interface *interface,
 	usb_fill_int_urb(ucs->urb_int_in, udev,
 			 usb_rcvintpipe(udev,
 					(endpoint->bEndpointAddress) & 0x0f),
-			 ucs->int_in_buf, 3, read_int_callback, cs,
+			 ucs->int_in_buf, IP_MSGSIZE, read_int_callback, cs,
 			 endpoint->bInterval);
 	if ((rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL)) != 0) {
 		dev_err(cs->dev, "could not submit interrupt URB: %s\n",
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index b4d44e571d7..8132533d71f 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -212,6 +212,9 @@ static void lg_notify(struct virtqueue *vq)
 	hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0);
 }
 
+/* An extern declaration inside a C file is bad form.  Don't do it. */
+extern void lguest_setup_irq(unsigned int irq);
+
 /* This routine finds the first virtqueue described in the configuration of
  * this device and sets it up.
  *
@@ -266,6 +269,9 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 		goto unmap;
 	}
 
+	/* Make sure the interrupt is allocated. */
+	lguest_setup_irq(lvq->config.irq);
+
 	/* Tell the interrupt for this virtqueue to go to the virtio_ring
 	 * interrupt handler. */
 	/* FIXME: We used to have a flag for the Host to tell us we could use
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 35bda49796f..bfefd079a95 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -60,6 +60,7 @@ struct dm_crypt_io {
 };
 
 struct dm_crypt_request {
+	struct convert_context *ctx;
 	struct scatterlist sg_in;
 	struct scatterlist sg_out;
 };
@@ -335,6 +336,18 @@ static void crypt_convert_init(struct crypt_config *cc,
 	init_completion(&ctx->restart);
 }
 
+static struct dm_crypt_request *dmreq_of_req(struct crypt_config *cc,
+					     struct ablkcipher_request *req)
+{
+	return (struct dm_crypt_request *)((char *)req + cc->dmreq_start);
+}
+
+static struct ablkcipher_request *req_of_dmreq(struct crypt_config *cc,
+					       struct dm_crypt_request *dmreq)
+{
+	return (struct ablkcipher_request *)((char *)dmreq - cc->dmreq_start);
+}
+
 static int crypt_convert_block(struct crypt_config *cc,
 			       struct convert_context *ctx,
 			       struct ablkcipher_request *req)
@@ -345,10 +358,11 @@ static int crypt_convert_block(struct crypt_config *cc,
 	u8 *iv;
 	int r = 0;
 
-	dmreq = (struct dm_crypt_request *)((char *)req + cc->dmreq_start);
+	dmreq = dmreq_of_req(cc, req);
 	iv = (u8 *)ALIGN((unsigned long)(dmreq + 1),
 			 crypto_ablkcipher_alignmask(cc->tfm) + 1);
 
+	dmreq->ctx = ctx;
 	sg_init_table(&dmreq->sg_in, 1);
 	sg_set_page(&dmreq->sg_in, bv_in->bv_page, 1 << SECTOR_SHIFT,
 		    bv_in->bv_offset + ctx->offset_in);
@@ -395,8 +409,9 @@ static void crypt_alloc_req(struct crypt_config *cc,
 		cc->req = mempool_alloc(cc->req_pool, GFP_NOIO);
 	ablkcipher_request_set_tfm(cc->req, cc->tfm);
 	ablkcipher_request_set_callback(cc->req, CRYPTO_TFM_REQ_MAY_BACKLOG |
-					     CRYPTO_TFM_REQ_MAY_SLEEP,
-					     kcryptd_async_done, ctx);
+					CRYPTO_TFM_REQ_MAY_SLEEP,
+					kcryptd_async_done,
+					dmreq_of_req(cc, cc->req));
 }
 
 /*
@@ -553,19 +568,22 @@ static void crypt_inc_pending(struct dm_crypt_io *io)
 static void crypt_dec_pending(struct dm_crypt_io *io)
 {
 	struct crypt_config *cc = io->target->private;
+	struct bio *base_bio = io->base_bio;
+	struct dm_crypt_io *base_io = io->base_io;
+	int error = io->error;
 
 	if (!atomic_dec_and_test(&io->pending))
 		return;
 
-	if (likely(!io->base_io))
-		bio_endio(io->base_bio, io->error);
+	mempool_free(io, cc->io_pool);
+
+	if (likely(!base_io))
+		bio_endio(base_bio, error);
 	else {
-		if (io->error && !io->base_io->error)
-			io->base_io->error = io->error;
-		crypt_dec_pending(io->base_io);
+		if (error && !base_io->error)
+			base_io->error = error;
+		crypt_dec_pending(base_io);
 	}
-
-	mempool_free(io, cc->io_pool);
 }
 
 /*
@@ -821,7 +839,8 @@ static void kcryptd_crypt_read_convert(struct dm_crypt_io *io)
 static void kcryptd_async_done(struct crypto_async_request *async_req,
 			       int error)
 {
-	struct convert_context *ctx = async_req->data;
+	struct dm_crypt_request *dmreq = async_req->data;
+	struct convert_context *ctx = dmreq->ctx;
 	struct dm_crypt_io *io = container_of(ctx, struct dm_crypt_io, ctx);
 	struct crypt_config *cc = io->target->private;
 
@@ -830,7 +849,7 @@ static void kcryptd_async_done(struct crypto_async_request *async_req,
 		return;
 	}
 
-	mempool_free(ablkcipher_request_cast(async_req), cc->req_pool);
+	mempool_free(req_of_dmreq(cc, dmreq), cc->req_pool);
 
 	if (!atomic_dec_and_test(&ctx->pending))
 		return;
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index f14813be4ef..36e2b5e46a6 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -292,6 +292,8 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 					     (PAGE_SIZE >> SECTOR_SHIFT));
 		num_bvecs = 1 + min_t(int, bio_get_nr_vecs(where->bdev),
 				      num_bvecs);
+		if (unlikely(num_bvecs > BIO_MAX_PAGES))
+			num_bvecs = BIO_MAX_PAGES;
 		bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios);
 		bio->bi_sector = where->sector + (where->count - remaining);
 		bio->bi_bdev = where->bdev;
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 54d0588fc1f..f01096549a9 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -704,7 +704,8 @@ static int dev_rename(struct dm_ioctl *param, size_t param_size)
 	char *new_name = (char *) param + param->data_start;
 
 	if (new_name < param->data ||
-	    invalid_str(new_name, (void *) param + param_size)) {
+	    invalid_str(new_name, (void *) param + param_size) ||
+	    strlen(new_name) > DM_NAME_LEN - 1) {
 		DMWARN("Invalid new logical volume name supplied.");
 		return -EINVAL;
 	}
@@ -1063,7 +1064,7 @@ static int table_load(struct dm_ioctl *param, size_t param_size)
 
 	r = populate_table(t, param, param_size);
 	if (r) {
-		dm_table_put(t);
+		dm_table_destroy(t);
 		goto out;
 	}
 
@@ -1071,7 +1072,7 @@ static int table_load(struct dm_ioctl *param, size_t param_size)
 	hc = dm_get_mdptr(md);
 	if (!hc || hc->md != md) {
 		DMWARN("device has been removed from the dev hash table.");
-		dm_table_put(t);
+		dm_table_destroy(t);
 		up_write(&_hash_lock);
 		r = -ENXIO;
 		goto out;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 51ba1db4b3e..8d40f27cce8 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -525,9 +525,12 @@ static int __noflush_suspending(struct mapped_device *md)
 static void dec_pending(struct dm_io *io, int error)
 {
 	unsigned long flags;
+	int io_error;
+	struct bio *bio;
+	struct mapped_device *md = io->md;
 
 	/* Push-back supersedes any I/O errors */
-	if (error && !(io->error > 0 && __noflush_suspending(io->md)))
+	if (error && !(io->error > 0 && __noflush_suspending(md)))
 		io->error = error;
 
 	if (atomic_dec_and_test(&io->io_count)) {
@@ -537,24 +540,27 @@ static void dec_pending(struct dm_io *io, int error)
 			 * This must be handled before the sleeper on
 			 * suspend queue merges the pushback list.
 			 */
-			spin_lock_irqsave(&io->md->pushback_lock, flags);
-			if (__noflush_suspending(io->md))
-				bio_list_add(&io->md->pushback, io->bio);
+			spin_lock_irqsave(&md->pushback_lock, flags);
+			if (__noflush_suspending(md))
+				bio_list_add(&md->pushback, io->bio);
 			else
 				/* noflush suspend was interrupted. */
 				io->error = -EIO;
-			spin_unlock_irqrestore(&io->md->pushback_lock, flags);
+			spin_unlock_irqrestore(&md->pushback_lock, flags);
 		}
 
 		end_io_acct(io);
 
-		if (io->error != DM_ENDIO_REQUEUE) {
-			trace_block_bio_complete(io->md->queue, io->bio);
+		io_error = io->error;
+		bio = io->bio;
 
-			bio_endio(io->bio, io->error);
-		}
+		free_io(md, io);
+
+		if (io_error != DM_ENDIO_REQUEUE) {
+			trace_block_bio_complete(md->queue, bio);
 
-		free_io(io->md, io);
+			bio_endio(bio, io_error);
+		}
 	}
 }
 
@@ -562,6 +568,7 @@ static void clone_endio(struct bio *bio, int error)
 {
 	int r = 0;
 	struct dm_target_io *tio = bio->bi_private;
+	struct dm_io *io = tio->io;
 	struct mapped_device *md = tio->io->md;
 	dm_endio_fn endio = tio->ti->type->end_io;
 
@@ -585,15 +592,14 @@ static void clone_endio(struct bio *bio, int error)
 		}
 	}
 
-	dec_pending(tio->io, error);
-
 	/*
 	 * Store md for cleanup instead of tio which is about to get freed.
 	 */
 	bio->bi_private = md->bs;
 
-	bio_put(bio);
 	free_tio(md, tio);
+	bio_put(bio);
+	dec_pending(io, error);
 }
 
 static sector_t max_io_len(struct mapped_device *md,
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 03b4cd0a634..a307f87eb90 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -214,12 +214,7 @@ static inline mddev_t *mddev_get(mddev_t *mddev)
 	return mddev;
 }
 
-static void mddev_delayed_delete(struct work_struct *ws)
-{
-	mddev_t *mddev = container_of(ws, mddev_t, del_work);
-	kobject_del(&mddev->kobj);
-	kobject_put(&mddev->kobj);
-}
+static void mddev_delayed_delete(struct work_struct *ws);
 
 static void mddev_put(mddev_t *mddev)
 {
@@ -3542,6 +3537,21 @@ static struct kobj_type md_ktype = {
 
 int mdp_major = 0;
 
+static void mddev_delayed_delete(struct work_struct *ws)
+{
+	mddev_t *mddev = container_of(ws, mddev_t, del_work);
+
+	if (mddev->private == &md_redundancy_group) {
+		sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+		if (mddev->sysfs_action)
+			sysfs_put(mddev->sysfs_action);
+		mddev->sysfs_action = NULL;
+		mddev->private = NULL;
+	}
+	kobject_del(&mddev->kobj);
+	kobject_put(&mddev->kobj);
+}
+
 static int md_alloc(dev_t dev, char *name)
 {
 	static DEFINE_MUTEX(disks_mutex);
@@ -4033,13 +4043,9 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 			mddev->queue->merge_bvec_fn = NULL;
 			mddev->queue->unplug_fn = NULL;
 			mddev->queue->backing_dev_info.congested_fn = NULL;
-			if (mddev->pers->sync_request) {
-				sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
-				if (mddev->sysfs_action)
-					sysfs_put(mddev->sysfs_action);
-				mddev->sysfs_action = NULL;
-			}
 			module_put(mddev->pers->owner);
+			if (mddev->pers->sync_request)
+				mddev->private = &md_redundancy_group;
 			mddev->pers = NULL;
 			/* tell userspace to handle 'inactive' */
 			sysfs_notify_dirent(mddev->sysfs_state);
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 29e8f1546ab..fec1d77fa85 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1683,7 +1683,7 @@ static int dst_tune_frontend(struct dvb_frontend* fe,
 
 static int dst_get_tuning_algo(struct dvb_frontend *fe)
 {
-	return dst_algo;
+	return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW;
 }
 
 static int dst_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 84340778508..8dcb3fbf7ac 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1290,9 +1290,6 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 		dprintk("%s() Finalised property cache\n", __func__);
 		dtv_property_cache_submit(fe);
 
-		/* Request the search algorithm to search */
-		fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
-
 		r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND,
 			&fepriv->parameters);
 		break;
@@ -1717,6 +1714,10 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file,
 			fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000;
 
 		fepriv->state = FESTATE_RETUNE;
+
+		/* Request the search algorithm to search */
+		fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
+
 		dvb_frontend_wakeup(fe);
 		dvb_frontend_add_event(fe, 0);
 		fepriv->status = 0;
diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c
index a67d1775a43..2da55ec2039 100644
--- a/drivers/media/dvb/frontends/stb0899_algo.c
+++ b/drivers/media/dvb/frontends/stb0899_algo.c
@@ -156,7 +156,7 @@ static void stb0899_first_subrange(struct stb0899_state *state)
 	}
 
 	if (range > 0)
-		internal->sub_range = MIN(internal->srch_range, range);
+		internal->sub_range = min(internal->srch_range, range);
 	else
 		internal->sub_range = 0;
 
@@ -185,7 +185,7 @@ static enum stb0899_status stb0899_check_tmg(struct stb0899_state *state)
 	timing = stb0899_read_reg(state, STB0899_RTF);
 
 	if (lock >= 42) {
-		if ((lock > 48) && (ABS(timing) >= 110)) {
+		if ((lock > 48) && (abs(timing) >= 110)) {
 			internal->status = ANALOGCARRIER;
 			dprintk(state->verbose, FE_DEBUG, 1, "-->ANALOG Carrier !");
 		} else {
@@ -222,7 +222,7 @@ static enum stb0899_status stb0899_search_tmg(struct stb0899_state *state)
 		index++;
 		derot_freq += index * internal->direction * derot_step;	/* next derot zig zag position	*/
 
-		if (ABS(derot_freq) > derot_limit)
+		if (abs(derot_freq) > derot_limit)
 			next_loop--;
 
 		if (next_loop) {
@@ -298,7 +298,7 @@ static enum stb0899_status stb0899_search_carrier(struct stb0899_state *state)
 			last_derot_freq = derot_freq;
 			derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */
 
-			if(ABS(derot_freq) > derot_limit)
+			if(abs(derot_freq) > derot_limit)
 				next_loop--;
 
 			if (next_loop) {
@@ -400,7 +400,7 @@ static enum stb0899_status stb0899_search_data(struct stb0899_state *state)
 		if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) {
 
 			derot_freq += index * internal->direction * derot_step;	/* next zig zag derotator position */
-			if (ABS(derot_freq) > derot_limit)
+			if (abs(derot_freq) > derot_limit)
 				next_loop--;
 
 			if (next_loop) {
@@ -467,7 +467,7 @@ static void next_sub_range(struct stb0899_state *state)
 
 	if (internal->sub_dir > 0) {
 		old_sub_range = internal->sub_range;
-		internal->sub_range = MIN((internal->srch_range / 2) -
+		internal->sub_range = min((internal->srch_range / 2) -
 					  (internal->tuner_offst + internal->sub_range / 2),
 					   internal->sub_range);
 
@@ -771,7 +771,7 @@ static long Log2Int(int number)
 	int i;
 
 	i = 0;
-	while ((1 << i) <= ABS(number))
+	while ((1 << i) <= abs(number))
 		i++;
 
 	if (number == 0)
diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c
index 10613acf18f..a04c782fff8 100644
--- a/drivers/media/dvb/frontends/stb0899_drv.c
+++ b/drivers/media/dvb/frontends/stb0899_drv.c
@@ -794,7 +794,7 @@ static int stb0899_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t
 	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
 	old_state = reg;
 	/* set to burst mode	*/
-	STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x02);
+	STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x03);
 	STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x01);
 	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
 	switch (burst) {
diff --git a/drivers/media/dvb/frontends/stb0899_priv.h b/drivers/media/dvb/frontends/stb0899_priv.h
index 24619e3689d..82395b91281 100644
--- a/drivers/media/dvb/frontends/stb0899_priv.h
+++ b/drivers/media/dvb/frontends/stb0899_priv.h
@@ -59,10 +59,6 @@
 #define MAKEWORD32(a, b, c, d)			(((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
 #define MAKEWORD16(a, b)			(((a) << 8) | (b))
 
-#define MIN(x, y)				((x) <= (y) ? (x) : (y))
-#define MAX(x, y)				((x) >= (y) ? (x) : (y))
-#define ABS(x)					((x) >= 0 ? (x) : -(x))
-
 #define LSB(x)					((x & 0xff))
 #define MSB(y)					((y >> 8) & 0xff)
 
@@ -168,10 +164,10 @@ struct stb0899_internal {
 	u32			freq;			/* Demod internal Frequency		*/
 	u32			srate;			/* Demod internal Symbol rate		*/
 	enum stb0899_fec	fecrate;		/* Demod internal FEC rate		*/
-	u32			srch_range;		/* Demod internal Search Range		*/
-	u32			sub_range;		/* Demod current sub range (Hz)		*/
-	u32			tuner_step;		/* Tuner step (Hz)			*/
-	u32			tuner_offst;		/* Relative offset to carrier (Hz)	*/
+	s32			srch_range;		/* Demod internal Search Range		*/
+	s32			sub_range;		/* Demod current sub range (Hz)		*/
+	s32			tuner_step;		/* Tuner step (Hz)			*/
+	s32			tuner_offst;		/* Relative offset to carrier (Hz)	*/
 	u32			tuner_bw;		/* Current bandwidth of the tuner (Hz)	*/
 
 	s32			mclk;			/* Masterclock Divider factor (binary)	*/
diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
index ff39275ab49..1ed5a7db4c5 100644
--- a/drivers/media/dvb/frontends/stb6100.c
+++ b/drivers/media/dvb/frontends/stb6100.c
@@ -427,11 +427,11 @@ static int stb6100_init(struct dvb_frontend *fe)
 	status->refclock	= 27000000;	/* Hz	*/
 	status->iqsense		= 1;
 	status->bandwidth	= 36000;	/* kHz	*/
-	state->bandwidth	= status->bandwidth * 1000;	/* MHz	*/
+	state->bandwidth	= status->bandwidth * 1000;	/* Hz	*/
 	state->reference	= status->refclock / 1000;	/* kHz	*/
 
 	/* Set default bandwidth.	*/
-	return stb6100_set_bandwidth(fe, status->bandwidth);
+	return stb6100_set_bandwidth(fe, state->bandwidth);
 }
 
 static int stb6100_get_state(struct dvb_frontend *fe,
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
index 170720b0281..b150ed30669 100644
--- a/drivers/media/dvb/frontends/zl10353.c
+++ b/drivers/media/dvb/frontends/zl10353.c
@@ -590,7 +590,7 @@ static int zl10353_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
 	struct zl10353_state *state = fe->demodulator_priv;
 	u8 val = 0x0a;
 
-	if (state->config.no_tuner) {
+	if (state->config.disable_i2c_gate_ctrl) {
 		/* No tuner attached to the internal I2C bus */
 		/* If set enable I2C bridge, the main I2C bus stopped hardly */
 		return 0;
diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h
index fdbb88ff75f..2287bac4624 100644
--- a/drivers/media/dvb/frontends/zl10353.h
+++ b/drivers/media/dvb/frontends/zl10353.h
@@ -38,6 +38,9 @@ struct zl10353_config
 
 	/* set if parallel ts output is required */
 	int parallel_ts;
+
+	/* set if i2c_gate_ctrl disable is required */
+	u8 disable_i2c_gate_ctrl:1;
 };
 
 #if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index e564a61a72d..48892b5715d 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -102,7 +102,11 @@ int s5k4aa_probe(struct sd *sd)
 	}
 
 	/* Test some registers, but we don't know their exact meaning yet */
-	if (m5602_read_sensor(sd, 0x00, prod_id, sizeof(prod_id)))
+	if (m5602_read_sensor(sd, 0x00, prod_id, 2))
+		return -ENODEV;
+	if (m5602_read_sensor(sd, 0x02, prod_id+2, 2))
+		return -ENODEV;
+	if (m5602_read_sensor(sd, 0x04, prod_id+4, 2))
 		return -ENODEV;
 
 	if (memcmp(prod_id, expected_prod_id, sizeof(prod_id)))
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index 73eb656acfe..805faaea644 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -80,17 +80,17 @@ static int omap24xxcam_clock_get(struct omap24xxcam_device *cam)
 {
 	int rval = 0;
 
-	cam->fck = clk_get(cam->dev, "cam_fck");
+	cam->fck = clk_get(cam->dev, "fck");
 	if (IS_ERR(cam->fck)) {
-		dev_err(cam->dev, "can't get cam_fck");
+		dev_err(cam->dev, "can't get camera fck");
 		rval = PTR_ERR(cam->fck);
 		omap24xxcam_clock_put(cam);
 		return rval;
 	}
 
-	cam->ick = clk_get(cam->dev, "cam_ick");
+	cam->ick = clk_get(cam->dev, "ick");
 	if (IS_ERR(cam->ick)) {
-		dev_err(cam->dev, "can't get cam_ick");
+		dev_err(cam->dev, "can't get camera ick");
 		rval = PTR_ERR(cam->ick);
 		omap24xxcam_clock_put(cam);
 	}
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 07c334f25aa..0c4ce58c53d 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -35,7 +35,6 @@
 #include <linux/videodev2.h>
 
 #include <mach/dma.h>
-#include <mach/pxa-regs.h>
 #include <mach/camera.h>
 
 #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 0776ecf56d2..b5370b3e1a3 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -860,6 +860,7 @@ static struct zl10353_config behold_h6_config = {
 	.demod_address = 0x1e>>1,
 	.no_tuner      = 1,
 	.parallel_ts   = 1,
+	.disable_i2c_gate_ctrl = 1,
 };
 
 /* ==================================================================
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 5aeccb301ce..076ed5bf48b 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -54,7 +54,7 @@ MODULE_LICENSE("GPL");
 /* ---------------------------------------------------------------------- */
 /* our structs                                                            */
 
-#define MAXREGS 64
+#define MAXREGS 256
 
 struct CHIPSTATE;
 typedef int  (*getvalue)(int);
diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/video/zoran/Kconfig
index 4ea5fa71de8..8666e19f31a 100644
--- a/drivers/media/video/zoran/Kconfig
+++ b/drivers/media/video/zoran/Kconfig
@@ -68,6 +68,7 @@ config VIDEO_ZORAN_AVS6EYES
 	tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
 	depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1
 	select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
 	help
 	  Support for the AverMedia 6 Eyes video surveillance card.
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 84d5ea1ec17..b457a05b28d 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1383,6 +1383,11 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 			wm8350->power.rev_g_coeff = 1;
 			break;
 
+		case 1:
+			dev_info(wm8350->dev, "WM8351 Rev B\n");
+			wm8350->power.rev_g_coeff = 1;
+			break;
+
 		default:
 			dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
 			ret = -ENODEV;
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 9c50e6f1c23..34ce2703d29 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -248,12 +248,15 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
 
 	sg_init_one(&sg, data_buf, len);
 
-	/*
-	 * The spec states that CSR and CID accesses have a timeout
-	 * of 64 clock cycles.
-	 */
-	data.timeout_ns = 0;
-	data.timeout_clks = 64;
+	if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
+		/*
+		 * The spec states that CSR and CID accesses have a timeout
+		 * of 64 clock cycles.
+		 */
+		data.timeout_ns = 0;
+		data.timeout_clks = 64;
+	} else
+		mmc_set_data_timeout(&data, card);
 
 	mmc_wait_for_req(host, &mrq);
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2909bbc8ad0..a663429b3d5 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data)
 	mod_timer(&host->timer, jiffies + HZ);
 }
 
-static int mmci_probe(struct amba_device *dev, void *id)
+static int __devinit mmci_probe(struct amba_device *dev, void *id)
 {
 	struct mmc_platform_data *plat = dev->dev.platform_data;
 	struct mmci_host *host;
@@ -633,7 +633,7 @@ static int mmci_probe(struct amba_device *dev, void *id)
 	return ret;
 }
 
-static int mmci_remove(struct amba_device *dev)
+static int __devexit mmci_remove(struct amba_device *dev)
 {
 	struct mmc_host *mmc = amba_get_drvdata(dev);
 
@@ -730,7 +730,7 @@ static struct amba_driver mmci_driver = {
 		.name	= DRIVER_NAME,
 	},
 	.probe		= mmci_probe,
-	.remove		= mmci_remove,
+	.remove		= __devexit_p(mmci_remove),
 	.suspend	= mmci_suspend,
 	.resume		= mmci_resume,
 	.id_table	= mmci_ids,
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index dda0be4e25d..b4a615c55f2 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -42,7 +42,7 @@
 #define HAS_DMA
 #endif
 
-#define DRIVER_NAME "imx-mmc"
+#define DRIVER_NAME "mxc-mmc"
 
 #define MMC_REG_STR_STP_CLK		0x00
 #define MMC_REG_STATUS			0x04
@@ -707,7 +707,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 	host->res = r;
 	host->irq = irq;
 
-	host->clk = clk_get(&pdev->dev, "sdhc_clk");
+	host->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
 		goto out_iounmap;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 67d7b7fef08..5570849188c 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1460,18 +1460,12 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 	if (!host->virt_base)
 		goto err_ioremap;
 
-	if (cpu_is_omap24xx()) {
-		host->iclk = clk_get(&pdev->dev, "mmc_ick");
-		if (IS_ERR(host->iclk))
-			goto err_free_mmc_host;
-		clk_enable(host->iclk);
-	}
-
-	if (!cpu_is_omap24xx())
-		host->fclk = clk_get(&pdev->dev, "mmc_ck");
-	else
-		host->fclk = clk_get(&pdev->dev, "mmc_fck");
+	host->iclk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(host->iclk))
+		goto err_free_mmc_host;
+	clk_enable(host->iclk);
 
+	host->fclk = clk_get(&pdev->dev, "fck");
 	if (IS_ERR(host->fclk)) {
 		ret = PTR_ERR(host->fclk);
 		goto err_free_iclk;
@@ -1536,10 +1530,10 @@ static int mmc_omap_remove(struct platform_device *pdev)
 	if (host->pdata->cleanup)
 		host->pdata->cleanup(&pdev->dev);
 
-	if (host->iclk && !IS_ERR(host->iclk))
-		clk_put(host->iclk);
-	if (host->fclk && !IS_ERR(host->fclk))
-		clk_put(host->fclk);
+	mmc_omap_fclk_enable(host, 0);
+	clk_put(host->fclk);
+	clk_disable(host->iclk);
+	clk_put(host->iclk);
 
 	iounmap(host->virt_base);
 	release_mem_region(pdev->resource[0].start,
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index a631c81dce1..3916a5618e2 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -956,13 +956,13 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 
 	sema_init(&host->sem, 1);
 
-	host->iclk = clk_get(&pdev->dev, "mmchs_ick");
+	host->iclk = clk_get(&pdev->dev, "ick");
 	if (IS_ERR(host->iclk)) {
 		ret = PTR_ERR(host->iclk);
 		host->iclk = NULL;
 		goto err1;
 	}
-	host->fclk = clk_get(&pdev->dev, "mmchs_fck");
+	host->fclk = clk_get(&pdev->dev, "fck");
 	if (IS_ERR(host->fclk)) {
 		ret = PTR_ERR(host->fclk);
 		host->fclk = NULL;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 9702ad3774c..430095725f9 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -30,9 +30,8 @@
 
 #include <asm/sizes.h>
 
-#include <mach/dma.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 #include <mach/mmc.h>
 
 #include "pxamci.h"
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index f4a67c65d30..2db166b7096 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -793,8 +793,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
-		s3c2410_dma_config(host->dma, 4,
-			(S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
+		s3c2410_dma_config(host->dma, 4, 0);
 		s3c2410_dma_set_buffdone_fn(host->dma,
 					    s3cmci_dma_done_callback);
 		s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index bc33200535f..6fde0a2e356 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -120,13 +120,6 @@ config MTD_PHRAM
 	  doesn't have access to, memory beyond the mem=xxx limit, nvram,
 	  memory on the video card, etc...
 
-config MTD_PS3VRAM
-	tristate "PS3 video RAM"
-	depends on FB_PS3
-	help
-	  This driver allows you to use excess PS3 video RAM as volatile
-	  storage or system swap.
-
 config MTD_LART
 	tristate "28F160xx flash driver for LART"
 	depends on SA1100_LART
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index e51521df4e4..0993d5cf392 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,4 +16,3 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
-obj-$(CONFIG_MTD_PS3VRAM)	+= ps3vram.o
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index d44f741ae22..6d9f810565c 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -821,7 +821,8 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 					if (!(info->flags & IS_POW2PS))
 						return info;
 				}
-			}
+			} else
+				return info;
 		}
 	}
 
diff --git a/drivers/mtd/devices/ps3vram.c b/drivers/mtd/devices/ps3vram.c
deleted file mode 100644
index d21e9beb7ed..00000000000
--- a/drivers/mtd/devices/ps3vram.c
+++ /dev/null
@@ -1,768 +0,0 @@
-/**
- * ps3vram - Use extra PS3 video ram as MTD block device.
- *
- * Copyright (c) 2007-2008 Jim Paris <jim@jtan.com>
- * Added support RSX DMA Vivien Chappelier <vivien.chappelier@free.fr>
- */
-
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/slab.h>
-#include <linux/version.h>
-#include <linux/gfp.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-
-#include <asm/lv1call.h>
-#include <asm/ps3.h>
-
-#define DEVICE_NAME		"ps3vram"
-
-#define XDR_BUF_SIZE (2 * 1024 * 1024) /* XDR buffer (must be 1MiB aligned) */
-#define XDR_IOIF 0x0c000000
-
-#define FIFO_BASE XDR_IOIF
-#define FIFO_SIZE (64 * 1024)
-
-#define DMA_PAGE_SIZE (4 * 1024)
-
-#define CACHE_PAGE_SIZE (256 * 1024)
-#define CACHE_PAGE_COUNT ((XDR_BUF_SIZE - FIFO_SIZE) / CACHE_PAGE_SIZE)
-
-#define CACHE_OFFSET CACHE_PAGE_SIZE
-#define FIFO_OFFSET 0
-
-#define CTRL_PUT 0x10
-#define CTRL_GET 0x11
-#define CTRL_TOP 0x15
-
-#define UPLOAD_SUBCH	1
-#define DOWNLOAD_SUBCH	2
-
-#define NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN	0x0000030c
-#define NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY	0x00000104
-
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601
-
-struct mtd_info ps3vram_mtd;
-
-#define CACHE_PAGE_PRESENT 1
-#define CACHE_PAGE_DIRTY   2
-
-struct ps3vram_tag {
-	unsigned int address;
-	unsigned int flags;
-};
-
-struct ps3vram_cache {
-	unsigned int page_count;
-	unsigned int page_size;
-	struct ps3vram_tag *tags;
-};
-
-struct ps3vram_priv {
-	u64 memory_handle;
-	u64 context_handle;
-	u32 *ctrl;
-	u32 *reports;
-	u8 __iomem *ddr_base;
-	u8 *xdr_buf;
-
-	u32 *fifo_base;
-	u32 *fifo_ptr;
-
-	struct device *dev;
-	struct ps3vram_cache cache;
-
-	/* Used to serialize cache/DMA operations */
-	struct mutex lock;
-};
-
-#define DMA_NOTIFIER_HANDLE_BASE 0x66604200 /* first DMA notifier handle */
-#define DMA_NOTIFIER_OFFSET_BASE 0x1000     /* first DMA notifier offset */
-#define DMA_NOTIFIER_SIZE        0x40
-#define NOTIFIER 7	/* notifier used for completion report */
-
-/* A trailing '-' means to subtract off ps3fb_videomemory.size */
-char *size = "256M-";
-module_param(size, charp, 0);
-MODULE_PARM_DESC(size, "memory size");
-
-static u32 *ps3vram_get_notifier(u32 *reports, int notifier)
-{
-	return (void *) reports +
-		DMA_NOTIFIER_OFFSET_BASE +
-		DMA_NOTIFIER_SIZE * notifier;
-}
-
-static void ps3vram_notifier_reset(struct mtd_info *mtd)
-{
-	int i;
-
-	struct ps3vram_priv *priv = mtd->priv;
-	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
-	for (i = 0; i < 4; i++)
-		notify[i] = 0xffffffff;
-}
-
-static int ps3vram_notifier_wait(struct mtd_info *mtd, unsigned int timeout_ms)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
-	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
-
-	do {
-		if (!notify[3])
-			return 0;
-		msleep(1);
-	} while (time_before(jiffies, timeout));
-
-	return -ETIMEDOUT;
-}
-
-static void ps3vram_init_ring(struct mtd_info *mtd)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-
-	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
-	priv->ctrl[CTRL_GET] = FIFO_BASE + FIFO_OFFSET;
-}
-
-static int ps3vram_wait_ring(struct mtd_info *mtd, unsigned int timeout_ms)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
-
-	do {
-		if (priv->ctrl[CTRL_PUT] == priv->ctrl[CTRL_GET])
-			return 0;
-		msleep(1);
-	} while (time_before(jiffies, timeout));
-
-	dev_dbg(priv->dev, "%s:%d: FIFO timeout (%08x/%08x/%08x)\n", __func__,
-		__LINE__, priv->ctrl[CTRL_PUT], priv->ctrl[CTRL_GET],
-		priv->ctrl[CTRL_TOP]);
-
-	return -ETIMEDOUT;
-}
-
-static void ps3vram_out_ring(struct ps3vram_priv *priv, u32 data)
-{
-	*(priv->fifo_ptr)++ = data;
-}
-
-static void ps3vram_begin_ring(struct ps3vram_priv *priv, u32 chan,
-				      u32 tag, u32 size)
-{
-	ps3vram_out_ring(priv, (size << 18) | (chan << 13) | tag);
-}
-
-static void ps3vram_rewind_ring(struct mtd_info *mtd)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	u64 status;
-
-	ps3vram_out_ring(priv, 0x20000000 | (FIFO_BASE + FIFO_OFFSET));
-
-	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
-
-	/* asking the HV for a blit will kick the fifo */
-	status = lv1_gpu_context_attribute(priv->context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
-					   0, 0, 0, 0);
-	if (status)
-		dev_err(priv->dev, "%s:%d: lv1_gpu_context_attribute failed\n",
-			__func__, __LINE__);
-
-	priv->fifo_ptr = priv->fifo_base;
-}
-
-static void ps3vram_fire_ring(struct mtd_info *mtd)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	u64 status;
-
-	mutex_lock(&ps3_gpu_mutex);
-
-	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET +
-		(priv->fifo_ptr - priv->fifo_base) * sizeof(u32);
-
-	/* asking the HV for a blit will kick the fifo */
-	status = lv1_gpu_context_attribute(priv->context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
-					   0, 0, 0, 0);
-	if (status)
-		dev_err(priv->dev, "%s:%d: lv1_gpu_context_attribute failed\n",
-			__func__, __LINE__);
-
-	if ((priv->fifo_ptr - priv->fifo_base) * sizeof(u32) >
-		FIFO_SIZE - 1024) {
-		dev_dbg(priv->dev, "%s:%d: fifo full, rewinding\n", __func__,
-			__LINE__);
-		ps3vram_wait_ring(mtd, 200);
-		ps3vram_rewind_ring(mtd);
-	}
-
-	mutex_unlock(&ps3_gpu_mutex);
-}
-
-static void ps3vram_bind(struct mtd_info *mtd)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-
-	ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0, 1);
-	ps3vram_out_ring(priv, 0x31337303);
-	ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x180, 3);
-	ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
-	ps3vram_out_ring(priv, 0xfeed0001);	/* DMA system RAM instance */
-	ps3vram_out_ring(priv, 0xfeed0000);     /* DMA video RAM instance */
-
-	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0, 1);
-	ps3vram_out_ring(priv, 0x3137c0de);
-	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x180, 3);
-	ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
-	ps3vram_out_ring(priv, 0xfeed0000);	/* DMA video RAM instance */
-	ps3vram_out_ring(priv, 0xfeed0001);	/* DMA system RAM instance */
-
-	ps3vram_fire_ring(mtd);
-}
-
-static int ps3vram_upload(struct mtd_info *mtd, unsigned int src_offset,
-			  unsigned int dst_offset, int len, int count)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-
-	ps3vram_begin_ring(priv, UPLOAD_SUBCH,
-			   NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
-	ps3vram_out_ring(priv, XDR_IOIF + src_offset);
-	ps3vram_out_ring(priv, dst_offset);
-	ps3vram_out_ring(priv, len);
-	ps3vram_out_ring(priv, len);
-	ps3vram_out_ring(priv, len);
-	ps3vram_out_ring(priv, count);
-	ps3vram_out_ring(priv, (1 << 8) | 1);
-	ps3vram_out_ring(priv, 0);
-
-	ps3vram_notifier_reset(mtd);
-	ps3vram_begin_ring(priv, UPLOAD_SUBCH,
-			   NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
-	ps3vram_out_ring(priv, 0);
-	ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x100, 1);
-	ps3vram_out_ring(priv, 0);
-	ps3vram_fire_ring(mtd);
-	if (ps3vram_notifier_wait(mtd, 200) < 0) {
-		dev_dbg(priv->dev, "%s:%d: notifier timeout\n", __func__,
-			__LINE__);
-		return -1;
-	}
-
-	return 0;
-}
-
-static int ps3vram_download(struct mtd_info *mtd, unsigned int src_offset,
-			    unsigned int dst_offset, int len, int count)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-
-	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
-			   NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
-	ps3vram_out_ring(priv, src_offset);
-	ps3vram_out_ring(priv, XDR_IOIF + dst_offset);
-	ps3vram_out_ring(priv, len);
-	ps3vram_out_ring(priv, len);
-	ps3vram_out_ring(priv, len);
-	ps3vram_out_ring(priv, count);
-	ps3vram_out_ring(priv, (1 << 8) | 1);
-	ps3vram_out_ring(priv, 0);
-
-	ps3vram_notifier_reset(mtd);
-	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
-			   NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
-	ps3vram_out_ring(priv, 0);
-	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x100, 1);
-	ps3vram_out_ring(priv, 0);
-	ps3vram_fire_ring(mtd);
-	if (ps3vram_notifier_wait(mtd, 200) < 0) {
-		dev_dbg(priv->dev, "%s:%d: notifier timeout\n", __func__,
-			__LINE__);
-		return -1;
-	}
-
-	return 0;
-}
-
-static void ps3vram_cache_evict(struct mtd_info *mtd, int entry)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	struct ps3vram_cache *cache = &priv->cache;
-
-	if (cache->tags[entry].flags & CACHE_PAGE_DIRTY) {
-		dev_dbg(priv->dev, "%s:%d: flushing %d : 0x%08x\n", __func__,
-			__LINE__, entry, cache->tags[entry].address);
-		if (ps3vram_upload(mtd,
-				   CACHE_OFFSET + entry * cache->page_size,
-				   cache->tags[entry].address,
-				   DMA_PAGE_SIZE,
-				   cache->page_size / DMA_PAGE_SIZE) < 0) {
-			dev_dbg(priv->dev, "%s:%d: failed to upload from "
-				"0x%x to 0x%x size 0x%x\n", __func__, __LINE__,
-				entry * cache->page_size,
-				cache->tags[entry].address, cache->page_size);
-		}
-		cache->tags[entry].flags &= ~CACHE_PAGE_DIRTY;
-	}
-}
-
-static void ps3vram_cache_load(struct mtd_info *mtd, int entry,
-			       unsigned int address)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	struct ps3vram_cache *cache = &priv->cache;
-
-	dev_dbg(priv->dev, "%s:%d: fetching %d : 0x%08x\n", __func__, __LINE__,
-		entry, address);
-	if (ps3vram_download(mtd,
-			     address,
-			     CACHE_OFFSET + entry * cache->page_size,
-			     DMA_PAGE_SIZE,
-			     cache->page_size / DMA_PAGE_SIZE) < 0) {
-		dev_err(priv->dev, "%s:%d: failed to download from "
-			"0x%x to 0x%x size 0x%x\n", __func__, __LINE__, address,
-			entry * cache->page_size, cache->page_size);
-	}
-
-	cache->tags[entry].address = address;
-	cache->tags[entry].flags |= CACHE_PAGE_PRESENT;
-}
-
-
-static void ps3vram_cache_flush(struct mtd_info *mtd)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	struct ps3vram_cache *cache = &priv->cache;
-	int i;
-
-	dev_dbg(priv->dev, "%s:%d: FLUSH\n", __func__, __LINE__);
-	for (i = 0; i < cache->page_count; i++) {
-		ps3vram_cache_evict(mtd, i);
-		cache->tags[i].flags = 0;
-	}
-}
-
-static unsigned int ps3vram_cache_match(struct mtd_info *mtd, loff_t address)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	struct ps3vram_cache *cache = &priv->cache;
-	unsigned int base;
-	unsigned int offset;
-	int i;
-	static int counter;
-
-	offset = (unsigned int) (address & (cache->page_size - 1));
-	base = (unsigned int) (address - offset);
-
-	/* fully associative check */
-	for (i = 0; i < cache->page_count; i++) {
-		if ((cache->tags[i].flags & CACHE_PAGE_PRESENT) &&
-		    cache->tags[i].address == base) {
-			dev_dbg(priv->dev, "%s:%d: found entry %d : 0x%08x\n",
-				__func__, __LINE__, i, cache->tags[i].address);
-			return i;
-		}
-	}
-
-	/* choose a random entry */
-	i = (jiffies + (counter++)) % cache->page_count;
-	dev_dbg(priv->dev, "%s:%d: using entry %d\n", __func__, __LINE__, i);
-
-	ps3vram_cache_evict(mtd, i);
-	ps3vram_cache_load(mtd, i, base);
-
-	return i;
-}
-
-static int ps3vram_cache_init(struct mtd_info *mtd)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-
-	priv->cache.page_count = CACHE_PAGE_COUNT;
-	priv->cache.page_size = CACHE_PAGE_SIZE;
-	priv->cache.tags = kzalloc(sizeof(struct ps3vram_tag) *
-				   CACHE_PAGE_COUNT, GFP_KERNEL);
-	if (priv->cache.tags == NULL) {
-		dev_err(priv->dev, "%s:%d: could not allocate cache tags\n",
-			__func__, __LINE__);
-		return -ENOMEM;
-	}
-
-	dev_info(priv->dev, "created ram cache: %d entries, %d KiB each\n",
-		CACHE_PAGE_COUNT, CACHE_PAGE_SIZE / 1024);
-
-	return 0;
-}
-
-static void ps3vram_cache_cleanup(struct mtd_info *mtd)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-
-	ps3vram_cache_flush(mtd);
-	kfree(priv->cache.tags);
-}
-
-static int ps3vram_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-
-	if (instr->addr + instr->len > mtd->size)
-		return -EINVAL;
-
-	mutex_lock(&priv->lock);
-
-	ps3vram_cache_flush(mtd);
-
-	/* Set bytes to 0xFF */
-	memset_io(priv->ddr_base + instr->addr, 0xFF, instr->len);
-
-	mutex_unlock(&priv->lock);
-
-	instr->state = MTD_ERASE_DONE;
-	mtd_erase_callback(instr);
-
-	return 0;
-}
-
-static int ps3vram_read(struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	unsigned int cached, count;
-
-	dev_dbg(priv->dev, "%s:%d: from=0x%08x len=0x%zx\n", __func__, __LINE__,
-		(unsigned int)from, len);
-
-	if (from >= mtd->size)
-		return -EINVAL;
-
-	if (len > mtd->size - from)
-		len = mtd->size - from;
-
-	/* Copy from vram to buf */
-	count = len;
-	while (count) {
-		unsigned int offset, avail;
-		unsigned int entry;
-
-		offset = (unsigned int) (from & (priv->cache.page_size - 1));
-		avail  = priv->cache.page_size - offset;
-
-		mutex_lock(&priv->lock);
-
-		entry = ps3vram_cache_match(mtd, from);
-		cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
-
-		dev_dbg(priv->dev, "%s:%d: from=%08x cached=%08x offset=%08x "
-			"avail=%08x count=%08x\n", __func__, __LINE__,
-			(unsigned int)from, cached, offset, avail, count);
-
-		if (avail > count)
-			avail = count;
-		memcpy(buf, priv->xdr_buf + cached, avail);
-
-		mutex_unlock(&priv->lock);
-
-		buf += avail;
-		count -= avail;
-		from += avail;
-	}
-
-	*retlen = len;
-	return 0;
-}
-
-static int ps3vram_write(struct mtd_info *mtd, loff_t to, size_t len,
-			 size_t *retlen, const u_char *buf)
-{
-	struct ps3vram_priv *priv = mtd->priv;
-	unsigned int cached, count;
-
-	if (to >= mtd->size)
-		return -EINVAL;
-
-	if (len > mtd->size - to)
-		len = mtd->size - to;
-
-	/* Copy from buf to vram */
-	count = len;
-	while (count) {
-		unsigned int offset, avail;
-		unsigned int entry;
-
-		offset = (unsigned int) (to & (priv->cache.page_size - 1));
-		avail  = priv->cache.page_size - offset;
-
-		mutex_lock(&priv->lock);
-
-		entry = ps3vram_cache_match(mtd, to);
-		cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
-
-		dev_dbg(priv->dev, "%s:%d: to=%08x cached=%08x offset=%08x "
-			"avail=%08x count=%08x\n", __func__, __LINE__,
-			(unsigned int)to, cached, offset, avail, count);
-
-		if (avail > count)
-			avail = count;
-		memcpy(priv->xdr_buf + cached, buf, avail);
-
-		priv->cache.tags[entry].flags |= CACHE_PAGE_DIRTY;
-
-		mutex_unlock(&priv->lock);
-
-		buf += avail;
-		count -= avail;
-		to += avail;
-	}
-
-	*retlen = len;
-	return 0;
-}
-
-static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
-{
-	struct ps3vram_priv *priv;
-	int status;
-	u64 ddr_lpar;
-	u64 ctrl_lpar;
-	u64 info_lpar;
-	u64 reports_lpar;
-	u64 ddr_size;
-	u64 reports_size;
-	int ret = -ENOMEM;
-	char *rest;
-
-	ret = -EIO;
-	ps3vram_mtd.priv = kzalloc(sizeof(struct ps3vram_priv), GFP_KERNEL);
-	if (!ps3vram_mtd.priv)
-		goto out;
-	priv = ps3vram_mtd.priv;
-
-	mutex_init(&priv->lock);
-	priv->dev = &dev->core;
-
-	/* Allocate XDR buffer (1MiB aligned) */
-	priv->xdr_buf = (void *)__get_free_pages(GFP_KERNEL,
-		get_order(XDR_BUF_SIZE));
-	if (priv->xdr_buf == NULL) {
-		dev_dbg(&dev->core, "%s:%d: could not allocate XDR buffer\n",
-			__func__, __LINE__);
-		ret = -ENOMEM;
-		goto out_free_priv;
-	}
-
-	/* Put FIFO at begginning of XDR buffer */
-	priv->fifo_base = (u32 *) (priv->xdr_buf + FIFO_OFFSET);
-	priv->fifo_ptr = priv->fifo_base;
-
-	/* XXX: Need to open GPU, in case ps3fb or snd_ps3 aren't loaded */
-	if (ps3_open_hv_device(dev)) {
-		dev_err(&dev->core, "%s:%d: ps3_open_hv_device failed\n",
-			__func__, __LINE__);
-		ret = -EAGAIN;
-		goto out_close_gpu;
-	}
-
-	/* Request memory */
-	status = -1;
-	ddr_size = memparse(size, &rest);
-	if (*rest == '-')
-		ddr_size -= ps3fb_videomemory.size;
-	ddr_size = ALIGN(ddr_size, 1024*1024);
-	if (ddr_size <= 0) {
-		dev_err(&dev->core, "%s:%d: specified size is too small\n",
-			__func__, __LINE__);
-		ret = -EINVAL;
-		goto out_close_gpu;
-	}
-
-	while (ddr_size > 0) {
-		status = lv1_gpu_memory_allocate(ddr_size, 0, 0, 0, 0,
-						 &priv->memory_handle,
-						 &ddr_lpar);
-		if (!status)
-			break;
-		ddr_size -= 1024*1024;
-	}
-	if (status || ddr_size <= 0) {
-		dev_err(&dev->core, "%s:%d: lv1_gpu_memory_allocate failed\n",
-			__func__, __LINE__);
-		ret = -ENOMEM;
-		goto out_free_xdr_buf;
-	}
-
-	/* Request context */
-	status = lv1_gpu_context_allocate(priv->memory_handle,
-					  0,
-					  &priv->context_handle,
-					  &ctrl_lpar,
-					  &info_lpar,
-					  &reports_lpar,
-					  &reports_size);
-	if (status) {
-		dev_err(&dev->core, "%s:%d: lv1_gpu_context_allocate failed\n",
-			__func__, __LINE__);
-		ret = -ENOMEM;
-		goto out_free_memory;
-	}
-
-	/* Map XDR buffer to RSX */
-	status = lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
-				       ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
-				       XDR_BUF_SIZE, 0);
-	if (status) {
-		dev_err(&dev->core, "%s:%d: lv1_gpu_context_iomap failed\n",
-			__func__, __LINE__);
-		ret = -ENOMEM;
-		goto out_free_context;
-	}
-
-	priv->ddr_base = ioremap_flags(ddr_lpar, ddr_size, _PAGE_NO_CACHE);
-
-	if (!priv->ddr_base) {
-		dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
-			__LINE__);
-		ret = -ENOMEM;
-		goto out_free_context;
-	}
-
-	priv->ctrl = ioremap(ctrl_lpar, 64 * 1024);
-	if (!priv->ctrl) {
-		dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
-			__LINE__);
-		ret = -ENOMEM;
-		goto out_unmap_vram;
-	}
-
-	priv->reports = ioremap(reports_lpar, reports_size);
-	if (!priv->reports) {
-		dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
-			__LINE__);
-		ret = -ENOMEM;
-		goto out_unmap_ctrl;
-	}
-
-	mutex_lock(&ps3_gpu_mutex);
-	ps3vram_init_ring(&ps3vram_mtd);
-	mutex_unlock(&ps3_gpu_mutex);
-
-	ps3vram_mtd.name = "ps3vram";
-	ps3vram_mtd.size = ddr_size;
-	ps3vram_mtd.flags = MTD_CAP_RAM;
-	ps3vram_mtd.erase = ps3vram_erase;
-	ps3vram_mtd.point = NULL;
-	ps3vram_mtd.unpoint = NULL;
-	ps3vram_mtd.read = ps3vram_read;
-	ps3vram_mtd.write = ps3vram_write;
-	ps3vram_mtd.owner = THIS_MODULE;
-	ps3vram_mtd.type = MTD_RAM;
-	ps3vram_mtd.erasesize = CACHE_PAGE_SIZE;
-	ps3vram_mtd.writesize = 1;
-
-	ps3vram_bind(&ps3vram_mtd);
-
-	mutex_lock(&ps3_gpu_mutex);
-	ret = ps3vram_wait_ring(&ps3vram_mtd, 100);
-	mutex_unlock(&ps3_gpu_mutex);
-	if (ret < 0) {
-		dev_err(&dev->core, "%s:%d: failed to initialize channels\n",
-			__func__, __LINE__);
-		ret = -ETIMEDOUT;
-		goto out_unmap_reports;
-	}
-
-	ps3vram_cache_init(&ps3vram_mtd);
-
-	if (add_mtd_device(&ps3vram_mtd)) {
-		dev_err(&dev->core, "%s:%d: add_mtd_device failed\n",
-			__func__, __LINE__);
-		ret = -EAGAIN;
-		goto out_cache_cleanup;
-	}
-
-	dev_info(&dev->core, "reserved %u MiB of gpu memory\n",
-		(unsigned int)(ddr_size / 1024 / 1024));
-
-	return 0;
-
-out_cache_cleanup:
-	ps3vram_cache_cleanup(&ps3vram_mtd);
-out_unmap_reports:
-	iounmap(priv->reports);
-out_unmap_ctrl:
-	iounmap(priv->ctrl);
-out_unmap_vram:
-	iounmap(priv->ddr_base);
-out_free_context:
-	lv1_gpu_context_free(priv->context_handle);
-out_free_memory:
-	lv1_gpu_memory_free(priv->memory_handle);
-out_close_gpu:
-	ps3_close_hv_device(dev);
-out_free_xdr_buf:
-	free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
-out_free_priv:
-	kfree(ps3vram_mtd.priv);
-	ps3vram_mtd.priv = NULL;
-out:
-	return ret;
-}
-
-static int ps3vram_shutdown(struct ps3_system_bus_device *dev)
-{
-	struct ps3vram_priv *priv;
-
-	priv = ps3vram_mtd.priv;
-
-	del_mtd_device(&ps3vram_mtd);
-	ps3vram_cache_cleanup(&ps3vram_mtd);
-	iounmap(priv->reports);
-	iounmap(priv->ctrl);
-	iounmap(priv->ddr_base);
-	lv1_gpu_context_free(priv->context_handle);
-	lv1_gpu_memory_free(priv->memory_handle);
-	ps3_close_hv_device(dev);
-	free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
-	kfree(priv);
-	return 0;
-}
-
-static struct ps3_system_bus_driver ps3vram_driver = {
-	.match_id	= PS3_MATCH_ID_GPU,
-	.match_sub_id	= PS3_MATCH_SUB_ID_GPU_RAMDISK,
-	.core.name	= DEVICE_NAME,
-	.core.owner	= THIS_MODULE,
-	.probe		= ps3vram_probe,
-	.remove		= ps3vram_shutdown,
-	.shutdown	= ps3vram_shutdown,
-};
-
-static int __init ps3vram_init(void)
-{
-	return ps3_system_bus_driver_register(&ps3vram_driver);
-}
-
-static void __exit ps3vram_exit(void)
-{
-	ps3_system_bus_driver_unregister(&ps3vram_driver);
-}
-
-module_init(ps3vram_init);
-module_exit(ps3vram_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jim Paris <jim@jtan.com>");
-MODULE_DESCRIPTION("MTD driver for PS3 video RAM");
-MODULE_ALIAS(PS3_MODULE_ALIAS_GPU_RAMDISK);
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index d2ec262666c..c9681a339a5 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -31,6 +31,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
@@ -38,7 +39,6 @@
 
 #include <asm/mach/flash.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #ifdef CONFIG_ARCH_P720T
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 4b122e7ab4b..229718222db 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -46,16 +46,19 @@ static int physmap_flash_remove(struct platform_device *dev)
 
 	physmap_data = dev->dev.platform_data;
 
+	if (info->cmtd) {
 #ifdef CONFIG_MTD_PARTITIONS
-	if (info->nr_parts) {
-		del_mtd_partitions(info->cmtd);
-		kfree(info->parts);
-	} else if (physmap_data->nr_parts)
-		del_mtd_partitions(info->cmtd);
-	else
-		del_mtd_device(info->cmtd);
+		if (info->nr_parts || physmap_data->nr_parts)
+			del_mtd_partitions(info->cmtd);
+		else
+			del_mtd_device(info->cmtd);
 #else
-	del_mtd_device(info->cmtd);
+		del_mtd_device(info->cmtd);
+#endif
+	}
+#ifdef CONFIG_MTD_PARTITIONS
+	if (info->nr_parts)
+		kfree(info->parts);
 #endif
 
 #ifdef CONFIG_MTD_CONCAT
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 6f6a0f6dafd..8f57b6f40aa 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
+#include <linux/io.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
@@ -19,7 +20,6 @@
 #include <linux/mtd/concat.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/sizes.h>
 #include <asm/mach/flash.h>
 
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index fa129c09bca..10081e656a6 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -26,8 +26,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #define GPIO_NAND_CS	(11)
 #define GPIO_NAND_RB	(89)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 21fd4f1c480..bad048aca89 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -880,7 +880,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	this->read_buf = mxc_nand_read_buf;
 	this->verify_buf = mxc_nand_verify_buf;
 
-	host->clk = clk_get(&pdev->dev, "nfc_clk");
+	host->clk = clk_get(&pdev->dev, "nfc");
 	if (IS_ERR(host->clk))
 		goto eclk;
 
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index cc55cbc2b30..61b69cc4000 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,7 +22,6 @@
 #include <linux/irq.h>
 
 #include <mach/dma.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa3xx_nand.h>
 
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a2f185fd707..62d732a886f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1040,6 +1040,17 @@ config NI65
 	  To compile this driver as a module, choose M here. The module
 	  will be called ni65.
 
+config DNET
+	tristate "Dave ethernet support (DNET)"
+	depends on NET_ETHERNET && HAS_IOMEM
+	select PHYLIB
+	help
+	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
+	  Say Y to include support for the DNET chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dnet.
+
 source "drivers/net/tulip/Kconfig"
 
 config AT1700
@@ -2619,6 +2630,8 @@ config QLGE
 
 source "drivers/net/sfc/Kconfig"
 
+source "drivers/net/benet/Kconfig"
+
 endif # NETDEV_10000
 
 source "drivers/net/tokenring/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index aca8492db65..471baaff229 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_TEHUTI) += tehuti.o
 obj-$(CONFIG_ENIC) += enic/
 obj-$(CONFIG_JME) += jme.o
+obj-$(CONFIG_BE2NET) += benet/
 
 gianfar_driver-objs := gianfar.o \
 		gianfar_ethtool.o \
@@ -231,6 +232,7 @@ obj-$(CONFIG_ENC28J60) += enc28j60.o
 
 obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
 
+obj-$(CONFIG_DNET) += dnet.o
 obj-$(CONFIG_MACB) += macb.o
 
 obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index c2d012fcc29..4bc6901b381 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -27,9 +27,9 @@
 #include <linux/crc32.h>
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #define TX_BUFFERS 15
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 5fce1d5c1a1..9cc43476bfa 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -335,11 +335,20 @@ static int ixp4xx_mdio_register(void)
 	if (!(mdio_bus = mdiobus_alloc()))
 		return -ENOMEM;
 
-	/* All MII PHY accesses use NPE-B Ethernet registers */
-	spin_lock_init(&mdio_lock);
-	mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-	__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+	if (cpu_is_ixp43x()) {
+		/* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
+		if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
+			return -ENOSYS;
+		mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
+	} else {
+		/* All MII PHY accesses use NPE-B Ethernet registers */
+		if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
+			return -ENOSYS;
+		mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+	}
 
+	__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+	spin_lock_init(&mdio_lock);
 	mdio_bus->name = "IXP4xx MII Bus";
 	mdio_bus->read = &ixp4xx_mdio_read;
 	mdio_bus->write = &ixp4xx_mdio_write;
@@ -1250,9 +1259,6 @@ static struct platform_driver ixp4xx_eth_driver = {
 static int __init eth_init_module(void)
 {
 	int err;
-	if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
-		return -ENOSYS;
-
 	if ((err = ixp4xx_mdio_register()))
 		return err;
 	return platform_driver_register(&ixp4xx_eth_driver);
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 1cf2f949c0b..f3a12743489 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -560,7 +560,7 @@ ks8695_reset(struct ks8695_priv *ksp)
 		msleep(1);
 	}
 
-	if (reset_timeout == 0) {
+	if (reset_timeout < 0) {
 		dev_crit(ksp->dev,
 			 "Timeout waiting for DMA engines to reset\n");
 		/* And blithely carry on */
diff --git a/drivers/net/benet/Kconfig b/drivers/net/benet/Kconfig
new file mode 100644
index 00000000000..c6934f179c0
--- /dev/null
+++ b/drivers/net/benet/Kconfig
@@ -0,0 +1,7 @@
+config BE2NET
+	tristate "ServerEngines' 10Gbps NIC - BladeEngine 2"
+	depends on PCI && INET
+	select INET_LRO
+	help
+	This driver implements the NIC functionality for ServerEngines'
+	10Gbps network adapter - BladeEngine 2.
diff --git a/drivers/net/benet/Makefile b/drivers/net/benet/Makefile
new file mode 100644
index 00000000000..a60cd805113
--- /dev/null
+++ b/drivers/net/benet/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile to build the network driver for ServerEngine's BladeEngine.
+#
+
+obj-$(CONFIG_BE2NET) += be2net.o
+
+be2net-y :=  be_main.o be_cmds.o be_ethtool.o
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
new file mode 100644
index 00000000000..f327be57ca9
--- /dev/null
+++ b/drivers/net/benet/be.h
@@ -0,0 +1,328 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#ifndef BE_H
+#define BE_H
+
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+#include <linux/version.h>
+#include <linux/delay.h>
+#include <net/tcp.h>
+#include <net/ip.h>
+#include <net/ipv6.h>
+#include <linux/if_vlan.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/inet_lro.h>
+
+#include "be_hw.h"
+
+#define DRV_VER			"2.0.348"
+#define DRV_NAME		"be2net"
+#define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
+#define DRV_DESC		BE_NAME "Driver"
+
+/* Number of bytes of an RX frame that are copied to skb->data */
+#define BE_HDR_LEN 		64
+#define BE_MAX_JUMBO_FRAME_SIZE	9018
+#define BE_MIN_MTU		256
+
+#define BE_NUM_VLANS_SUPPORTED	64
+#define BE_MAX_EQD		96
+#define	BE_MAX_TX_FRAG_COUNT	30
+
+#define EVNT_Q_LEN		1024
+#define TX_Q_LEN		2048
+#define TX_CQ_LEN		1024
+#define RX_Q_LEN		1024	/* Does not support any other value */
+#define RX_CQ_LEN		1024
+#define MCC_Q_LEN		64	/* total size not to exceed 8 pages */
+#define MCC_CQ_LEN		256
+
+#define BE_NAPI_WEIGHT		64
+#define MAX_RX_POST 		BE_NAPI_WEIGHT /* Frags posted at a time */
+#define RX_FRAGS_REFILL_WM	(RX_Q_LEN - MAX_RX_POST)
+
+#define BE_MAX_LRO_DESCRIPTORS  16
+#define BE_MAX_FRAGS_PER_FRAME  16
+
+struct be_dma_mem {
+	void *va;
+	dma_addr_t dma;
+	u32 size;
+};
+
+struct be_queue_info {
+	struct be_dma_mem dma_mem;
+	u16 len;
+	u16 entry_size;	/* Size of an element in the queue */
+	u16 id;
+	u16 tail, head;
+	bool created;
+	atomic_t used;	/* Number of valid elements in the queue */
+};
+
+struct be_ctrl_info {
+	u8 __iomem *csr;
+	u8 __iomem *db;		/* Door Bell */
+	u8 __iomem *pcicfg;	/* PCI config space */
+	int pci_func;
+
+	/* Mbox used for cmd request/response */
+	spinlock_t cmd_lock;	/* For serializing cmds to BE card */
+	struct be_dma_mem mbox_mem;
+	/* Mbox mem is adjusted to align to 16 bytes. The allocated addr
+	 * is stored for freeing purpose */
+	struct be_dma_mem mbox_mem_alloced;
+};
+
+#include "be_cmds.h"
+
+struct be_drvr_stats {
+	u32 be_tx_reqs;		/* number of TX requests initiated */
+	u32 be_tx_stops;	/* number of times TX Q was stopped */
+	u32 be_fwd_reqs;	/* number of send reqs through forwarding i/f */
+	u32 be_tx_wrbs;		/* number of tx WRBs used */
+	u32 be_tx_events;	/* number of tx completion events  */
+	u32 be_tx_compl;	/* number of tx completion entries processed */
+	u64 be_tx_jiffies;
+	ulong be_tx_bytes;
+	ulong be_tx_bytes_prev;
+	u32 be_tx_rate;
+
+	u32 cache_barrier[16];
+
+	u32 be_ethrx_post_fail;/* number of ethrx buffer alloc failures */
+	u32 be_polls;		/* number of times NAPI called poll function */
+	u32 be_rx_events;	/* number of ucast rx completion events  */
+	u32 be_rx_compl;	/* number of rx completion entries processed */
+	u32 be_lro_hgram_data[8];	/* histogram of LRO data packets */
+	u32 be_lro_hgram_ack[8];	/* histogram of LRO ACKs */
+	u64 be_rx_jiffies;
+	ulong be_rx_bytes;
+	ulong be_rx_bytes_prev;
+	u32 be_rx_rate;
+	/* number of non ether type II frames dropped where
+	 * frame len > length field of Mac Hdr */
+	u32 be_802_3_dropped_frames;
+	/* number of non ether type II frames malformed where
+	 * in frame len < length field of Mac Hdr */
+	u32 be_802_3_malformed_frames;
+	u32 be_rxcp_err;	/* Num rx completion entries w/ err set. */
+	ulong rx_fps_jiffies;	/* jiffies at last FPS calc */
+	u32 be_rx_frags;
+	u32 be_prev_rx_frags;
+	u32 be_rx_fps;		/* Rx frags per second */
+};
+
+struct be_stats_obj {
+	struct be_drvr_stats drvr_stats;
+	struct net_device_stats net_stats;
+	struct be_dma_mem cmd;
+};
+
+struct be_eq_obj {
+	struct be_queue_info q;
+	char desc[32];
+
+	/* Adaptive interrupt coalescing (AIC) info */
+	bool enable_aic;
+	u16 min_eqd;		/* in usecs */
+	u16 max_eqd;		/* in usecs */
+	u16 cur_eqd;		/* in usecs */
+
+	struct napi_struct napi;
+};
+
+struct be_tx_obj {
+	struct be_queue_info q;
+	struct be_queue_info cq;
+	/* Remember the skbs that were transmitted */
+	struct sk_buff *sent_skb_list[TX_Q_LEN];
+};
+
+/* Struct to remember the pages posted for rx frags */
+struct be_rx_page_info {
+	struct page *page;
+	dma_addr_t bus;
+	u16 page_offset;
+	bool last_page_user;
+};
+
+struct be_rx_obj {
+	struct be_queue_info q;
+	struct be_queue_info cq;
+	struct be_rx_page_info page_info_tbl[RX_Q_LEN];
+	struct net_lro_mgr lro_mgr;
+	struct net_lro_desc lro_desc[BE_MAX_LRO_DESCRIPTORS];
+};
+
+#define BE_NUM_MSIX_VECTORS		2	/* 1 each for Tx and Rx */
+struct be_adapter {
+	struct pci_dev *pdev;
+	struct net_device *netdev;
+
+	/* Mbox, pci config, csr address information */
+	struct be_ctrl_info ctrl;
+
+	struct msix_entry msix_entries[BE_NUM_MSIX_VECTORS];
+	bool msix_enabled;
+	bool isr_registered;
+
+	/* TX Rings */
+	struct be_eq_obj tx_eq;
+	struct be_tx_obj tx_obj;
+
+	u32 cache_line_break[8];
+
+	/* Rx rings */
+	struct be_eq_obj rx_eq;
+	struct be_rx_obj rx_obj;
+	u32 big_page_size;	/* Compounded page size shared by rx wrbs */
+	bool rx_post_starved;	/* Zero rx frags have been posted to BE */
+
+	struct vlan_group *vlan_grp;
+	u16 num_vlans;
+	u8 vlan_tag[VLAN_GROUP_ARRAY_LEN];
+
+	struct be_stats_obj stats;
+	/* Work queue used to perform periodic tasks like getting statistics */
+	struct delayed_work work;
+
+	/* Ethtool knobs and info */
+	bool rx_csum; 		/* BE card must perform rx-checksumming */
+	u32 max_rx_coal;
+	char fw_ver[FW_VER_LEN];
+	u32 if_handle;		/* Used to configure filtering */
+	u32 pmac_id;		/* MAC addr handle used by BE card */
+
+	struct be_link_info link;
+	u32 port_num;
+};
+
+extern struct ethtool_ops be_ethtool_ops;
+
+#define drvr_stats(adapter)		(&adapter->stats.drvr_stats)
+
+#define BE_SET_NETDEV_OPS(netdev, ops)	(netdev->netdev_ops = ops)
+
+static inline u32 MODULO(u16 val, u16 limit)
+{
+	BUG_ON(limit & (limit - 1));
+	return val & (limit - 1);
+}
+
+static inline void index_adv(u16 *index, u16 val, u16 limit)
+{
+	*index = MODULO((*index + val), limit);
+}
+
+static inline void index_inc(u16 *index, u16 limit)
+{
+	*index = MODULO((*index + 1), limit);
+}
+
+#define PAGE_SHIFT_4K		12
+#define PAGE_SIZE_4K		(1 << PAGE_SHIFT_4K)
+
+/* Returns number of pages spanned by the data starting at the given addr */
+#define PAGES_4K_SPANNED(_address, size) 				\
+		((u32)((((size_t)(_address) & (PAGE_SIZE_4K - 1)) + 	\
+			(size) + (PAGE_SIZE_4K - 1)) >> PAGE_SHIFT_4K))
+
+/* Byte offset into the page corresponding to given address */
+#define OFFSET_IN_PAGE(addr)						\
+		 ((size_t)(addr) & (PAGE_SIZE_4K-1))
+
+/* Returns bit offset within a DWORD of a bitfield */
+#define AMAP_BIT_OFFSET(_struct, field)  				\
+		(((size_t)&(((_struct *)0)->field))%32)
+
+/* Returns the bit mask of the field that is NOT shifted into location. */
+static inline u32 amap_mask(u32 bitsize)
+{
+	return (bitsize == 32 ? 0xFFFFFFFF : (1 << bitsize) - 1);
+}
+
+static inline void
+amap_set(void *ptr, u32 dw_offset, u32 mask, u32 offset, u32 value)
+{
+	u32 *dw = (u32 *) ptr + dw_offset;
+	*dw &= ~(mask << offset);
+	*dw |= (mask & value) << offset;
+}
+
+#define AMAP_SET_BITS(_struct, field, ptr, val)				\
+		amap_set(ptr,						\
+			offsetof(_struct, field)/32,			\
+			amap_mask(sizeof(((_struct *)0)->field)),	\
+			AMAP_BIT_OFFSET(_struct, field),		\
+			val)
+
+static inline u32 amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
+{
+	u32 *dw = (u32 *) ptr;
+	return mask & (*(dw + dw_offset) >> offset);
+}
+
+#define AMAP_GET_BITS(_struct, field, ptr)				\
+		amap_get(ptr,						\
+			offsetof(_struct, field)/32,			\
+			amap_mask(sizeof(((_struct *)0)->field)),	\
+			AMAP_BIT_OFFSET(_struct, field))
+
+#define be_dws_cpu_to_le(wrb, len)	swap_dws(wrb, len)
+#define be_dws_le_to_cpu(wrb, len)	swap_dws(wrb, len)
+static inline void swap_dws(void *wrb, int len)
+{
+#ifdef __BIG_ENDIAN
+	u32 *dw = wrb;
+	BUG_ON(len % 4);
+	do {
+		*dw = cpu_to_le32(*dw);
+		dw++;
+		len -= 4;
+	} while (len);
+#endif				/* __BIG_ENDIAN */
+}
+
+static inline u8 is_tcp_pkt(struct sk_buff *skb)
+{
+	u8 val = 0;
+
+	if (ip_hdr(skb)->version == 4)
+		val = (ip_hdr(skb)->protocol == IPPROTO_TCP);
+	else if (ip_hdr(skb)->version == 6)
+		val = (ipv6_hdr(skb)->nexthdr == NEXTHDR_TCP);
+
+	return val;
+}
+
+static inline u8 is_udp_pkt(struct sk_buff *skb)
+{
+	u8 val = 0;
+
+	if (ip_hdr(skb)->version == 4)
+		val = (ip_hdr(skb)->protocol == IPPROTO_UDP);
+	else if (ip_hdr(skb)->version == 6)
+		val = (ipv6_hdr(skb)->nexthdr == NEXTHDR_UDP);
+
+	return val;
+}
+
+#endif				/* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
new file mode 100644
index 00000000000..d444aed962b
--- /dev/null
+++ b/drivers/net/benet/be_cmds.c
@@ -0,0 +1,861 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#include "be.h"
+
+static int be_mbox_db_ready_wait(void __iomem *db)
+{
+	int cnt = 0, wait = 5;
+	u32 ready;
+
+	do {
+		ready = ioread32(db) & MPU_MAILBOX_DB_RDY_MASK;
+		if (ready)
+			break;
+
+		if (cnt > 200000) {
+			printk(KERN_WARNING DRV_NAME
+				": mbox_db poll timed out\n");
+			return -1;
+		}
+
+		if (cnt > 50)
+			wait = 200;
+		cnt += wait;
+		udelay(wait);
+	} while (true);
+
+	return 0;
+}
+
+/*
+ * Insert the mailbox address into the doorbell in two steps
+ */
+static int be_mbox_db_ring(struct be_ctrl_info *ctrl)
+{
+	int status;
+	u16 compl_status, extd_status;
+	u32 val = 0;
+	void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
+	struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
+	struct be_mcc_mailbox *mbox = mbox_mem->va;
+	struct be_mcc_cq_entry *cqe = &mbox->cqe;
+
+	memset(cqe, 0, sizeof(*cqe));
+
+	val &= ~MPU_MAILBOX_DB_RDY_MASK;
+	val |= MPU_MAILBOX_DB_HI_MASK;
+	/* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
+	val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
+	iowrite32(val, db);
+
+	/* wait for ready to be set */
+	status = be_mbox_db_ready_wait(db);
+	if (status != 0)
+		return status;
+
+	val = 0;
+	val &= ~MPU_MAILBOX_DB_RDY_MASK;
+	val &= ~MPU_MAILBOX_DB_HI_MASK;
+	/* at bits 2 - 31 place mbox dma addr lsb bits 4 - 33 */
+	val |= (u32)(mbox_mem->dma >> 4) << 2;
+	iowrite32(val, db);
+
+	status = be_mbox_db_ready_wait(db);
+	if (status != 0)
+		return status;
+
+	/* compl entry has been made now */
+	be_dws_le_to_cpu(cqe, sizeof(*cqe));
+	if (!(cqe->flags & CQE_FLAGS_VALID_MASK)) {
+		printk(KERN_WARNING DRV_NAME ": ERROR invalid mbox compl\n");
+		return -1;
+	}
+
+	compl_status = (cqe->status >> CQE_STATUS_COMPL_SHIFT) &
+				CQE_STATUS_COMPL_MASK;
+	if (compl_status != MCC_STATUS_SUCCESS) {
+		extd_status = (cqe->status >> CQE_STATUS_EXTD_SHIFT) &
+				CQE_STATUS_EXTD_MASK;
+		printk(KERN_WARNING DRV_NAME
+			": ERROR in cmd compl. status(compl/extd)=%d/%d\n",
+			compl_status, extd_status);
+	}
+
+	return compl_status;
+}
+
+static int be_POST_stage_get(struct be_ctrl_info *ctrl, u16 *stage)
+{
+	u32 sem = ioread32(ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+
+	*stage = sem & EP_SEMAPHORE_POST_STAGE_MASK;
+	if ((sem >> EP_SEMAPHORE_POST_ERR_SHIFT) & EP_SEMAPHORE_POST_ERR_MASK)
+		return -1;
+	else
+		return 0;
+}
+
+static int be_POST_stage_poll(struct be_ctrl_info *ctrl, u16 poll_stage)
+{
+	u16 stage, cnt, error;
+	for (cnt = 0; cnt < 5000; cnt++) {
+		error = be_POST_stage_get(ctrl, &stage);
+		if (error)
+			return -1;
+
+		if (stage == poll_stage)
+			break;
+		udelay(1000);
+	}
+	if (stage != poll_stage)
+		return -1;
+	return 0;
+}
+
+
+int be_cmd_POST(struct be_ctrl_info *ctrl)
+{
+	u16 stage, error;
+
+	error = be_POST_stage_get(ctrl, &stage);
+	if (error)
+		goto err;
+
+	if (stage == POST_STAGE_ARMFW_RDY)
+		return 0;
+
+	if (stage != POST_STAGE_AWAITING_HOST_RDY)
+		goto err;
+
+	/* On awaiting host rdy, reset and again poll on awaiting host rdy */
+	iowrite32(POST_STAGE_BE_RESET, ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+	error = be_POST_stage_poll(ctrl, POST_STAGE_AWAITING_HOST_RDY);
+	if (error)
+		goto err;
+
+	/* Now kickoff POST and poll on armfw ready */
+	iowrite32(POST_STAGE_HOST_RDY, ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+	error = be_POST_stage_poll(ctrl, POST_STAGE_ARMFW_RDY);
+	if (error)
+		goto err;
+
+	return 0;
+err:
+	printk(KERN_WARNING DRV_NAME ": ERROR, stage=%d\n", stage);
+	return -1;
+}
+
+static inline void *embedded_payload(struct be_mcc_wrb *wrb)
+{
+	return wrb->payload.embedded_payload;
+}
+
+static inline struct be_sge *nonembedded_sgl(struct be_mcc_wrb *wrb)
+{
+	return &wrb->payload.sgl[0];
+}
+
+/* Don't touch the hdr after it's prepared */
+static void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
+				bool embedded, u8 sge_cnt)
+{
+	if (embedded)
+		wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
+	else
+		wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) <<
+				MCC_WRB_SGE_CNT_SHIFT;
+	wrb->payload_length = payload_len;
+	be_dws_cpu_to_le(wrb, 20);
+}
+
+/* Don't touch the hdr after it's prepared */
+static void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
+				u8 subsystem, u8 opcode, int cmd_len)
+{
+	req_hdr->opcode = opcode;
+	req_hdr->subsystem = subsystem;
+	req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+}
+
+static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
+			struct be_dma_mem *mem)
+{
+	int i, buf_pages = min(PAGES_4K_SPANNED(mem->va, mem->size), max_pages);
+	u64 dma = (u64)mem->dma;
+
+	for (i = 0; i < buf_pages; i++) {
+		pages[i].lo = cpu_to_le32(dma & 0xFFFFFFFF);
+		pages[i].hi = cpu_to_le32(upper_32_bits(dma));
+		dma += PAGE_SIZE_4K;
+	}
+}
+
+/* Converts interrupt delay in microseconds to multiplier value */
+static u32 eq_delay_to_mult(u32 usec_delay)
+{
+#define MAX_INTR_RATE			651042
+	const u32 round = 10;
+	u32 multiplier;
+
+	if (usec_delay == 0)
+		multiplier = 0;
+	else {
+		u32 interrupt_rate = 1000000 / usec_delay;
+		/* Max delay, corresponding to the lowest interrupt rate */
+		if (interrupt_rate == 0)
+			multiplier = 1023;
+		else {
+			multiplier = (MAX_INTR_RATE - interrupt_rate) * round;
+			multiplier /= interrupt_rate;
+			/* Round the multiplier to the closest value.*/
+			multiplier = (multiplier + round/2) / round;
+			multiplier = min(multiplier, (u32)1023);
+		}
+	}
+	return multiplier;
+}
+
+static inline struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem)
+{
+	return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+}
+
+int be_cmd_eq_create(struct be_ctrl_info *ctrl,
+		struct be_queue_info *eq, int eq_delay)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_eq_create *req = embedded_payload(wrb);
+	struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
+	struct be_dma_mem *q_mem = &eq->dma_mem;
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_EQ_CREATE, sizeof(*req));
+
+	req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+
+	AMAP_SET_BITS(struct amap_eq_context, func, req->context,
+			ctrl->pci_func);
+	AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
+	/* 4byte eqe*/
+	AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
+	AMAP_SET_BITS(struct amap_eq_context, count, req->context,
+			__ilog2_u32(eq->len/256));
+	AMAP_SET_BITS(struct amap_eq_context, delaymult, req->context,
+			eq_delay_to_mult(eq_delay));
+	be_dws_cpu_to_le(req->context, sizeof(req->context));
+
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		eq->id = le16_to_cpu(resp->eq_id);
+		eq->created = true;
+	}
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
+			u8 type, bool permanent, u32 if_handle)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_mac_query *req = embedded_payload(wrb);
+	struct be_cmd_resp_mac_query *resp = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_NTWK_MAC_QUERY, sizeof(*req));
+
+	req->type = type;
+	if (permanent) {
+		req->permanent = 1;
+	} else {
+		req->if_id = cpu_to_le16((u16)if_handle);
+		req->permanent = 0;
+	}
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status)
+		memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
+		u32 if_id, u32 *pmac_id)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_pmac_add *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_NTWK_PMAC_ADD, sizeof(*req));
+
+	req->if_id = cpu_to_le32(if_id);
+	memcpy(req->mac_address, mac_addr, ETH_ALEN);
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_pmac_add *resp = embedded_payload(wrb);
+		*pmac_id = le32_to_cpu(resp->pmac_id);
+	}
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_pmac_del *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_NTWK_PMAC_DEL, sizeof(*req));
+
+	req->if_id = cpu_to_le32(if_id);
+	req->pmac_id = cpu_to_le32(pmac_id);
+
+	status = be_mbox_db_ring(ctrl);
+	spin_unlock(&ctrl->cmd_lock);
+
+	return status;
+}
+
+int be_cmd_cq_create(struct be_ctrl_info *ctrl,
+		struct be_queue_info *cq, struct be_queue_info *eq,
+		bool sol_evts, bool no_delay, int coalesce_wm)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_cq_create *req = embedded_payload(wrb);
+	struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
+	struct be_dma_mem *q_mem = &cq->dma_mem;
+	void *ctxt = &req->context;
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_CQ_CREATE, sizeof(*req));
+
+	req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+
+	AMAP_SET_BITS(struct amap_cq_context, coalescwm, ctxt, coalesce_wm);
+	AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
+	AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
+			__ilog2_u32(cq->len/256));
+	AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
+	AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
+	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
+	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
+	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 0);
+	AMAP_SET_BITS(struct amap_cq_context, func, ctxt, ctrl->pci_func);
+	be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		cq->id = le16_to_cpu(resp->cq_id);
+		cq->created = true;
+	}
+	spin_unlock(&ctrl->cmd_lock);
+
+	return status;
+}
+
+int be_cmd_txq_create(struct be_ctrl_info *ctrl,
+			struct be_queue_info *txq,
+			struct be_queue_info *cq)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_eth_tx_create *req = embedded_payload(wrb);
+	struct be_dma_mem *q_mem = &txq->dma_mem;
+	void *ctxt = &req->context;
+	int status;
+	u32 len_encoded;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_TX_CREATE,
+		sizeof(*req));
+
+	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+	req->ulp_num = BE_ULP1_NUM;
+	req->type = BE_ETH_TX_RING_TYPE_STANDARD;
+
+	len_encoded = fls(txq->len); /* log2(len) + 1 */
+	if (len_encoded == 16)
+		len_encoded = 0;
+	AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt, len_encoded);
+	AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
+			ctrl->pci_func);
+	AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
+	AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
+
+	be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_eth_tx_create *resp = embedded_payload(wrb);
+		txq->id = le16_to_cpu(resp->cid);
+		txq->created = true;
+	}
+	spin_unlock(&ctrl->cmd_lock);
+
+	return status;
+}
+
+int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
+		struct be_queue_info *rxq, u16 cq_id, u16 frag_size,
+		u16 max_frame_size, u32 if_id, u32 rss)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_eth_rx_create *req = embedded_payload(wrb);
+	struct be_dma_mem *q_mem = &rxq->dma_mem;
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_RX_CREATE,
+		sizeof(*req));
+
+	req->cq_id = cpu_to_le16(cq_id);
+	req->frag_size = fls(frag_size) - 1;
+	req->num_pages = 2;
+	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+	req->interface_id = cpu_to_le32(if_id);
+	req->max_frame_size = cpu_to_le16(max_frame_size);
+	req->rss_queue = cpu_to_le32(rss);
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_eth_rx_create *resp = embedded_payload(wrb);
+		rxq->id = le16_to_cpu(resp->id);
+		rxq->created = true;
+	}
+	spin_unlock(&ctrl->cmd_lock);
+
+	return status;
+}
+
+/* Generic destroyer function for all types of queues */
+int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+		int queue_type)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_q_destroy *req = embedded_payload(wrb);
+	u8 subsys = 0, opcode = 0;
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+
+	memset(wrb, 0, sizeof(*wrb));
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	switch (queue_type) {
+	case QTYPE_EQ:
+		subsys = CMD_SUBSYSTEM_COMMON;
+		opcode = OPCODE_COMMON_EQ_DESTROY;
+		break;
+	case QTYPE_CQ:
+		subsys = CMD_SUBSYSTEM_COMMON;
+		opcode = OPCODE_COMMON_CQ_DESTROY;
+		break;
+	case QTYPE_TXQ:
+		subsys = CMD_SUBSYSTEM_ETH;
+		opcode = OPCODE_ETH_TX_DESTROY;
+		break;
+	case QTYPE_RXQ:
+		subsys = CMD_SUBSYSTEM_ETH;
+		opcode = OPCODE_ETH_RX_DESTROY;
+		break;
+	default:
+		printk(KERN_WARNING DRV_NAME ":bad Q type in Q destroy cmd\n");
+		status = -1;
+		goto err;
+	}
+	be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
+	req->id = cpu_to_le16(q->id);
+
+	status = be_mbox_db_ring(ctrl);
+err:
+	spin_unlock(&ctrl->cmd_lock);
+
+	return status;
+}
+
+/* Create an rx filtering policy configuration on an i/f */
+int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 flags, u8 *mac,
+		bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_if_create *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req));
+
+	req->capability_flags = cpu_to_le32(flags);
+	req->enable_flags = cpu_to_le32(flags);
+	if (!pmac_invalid)
+		memcpy(req->mac_addr, mac, ETH_ALEN);
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_if_create *resp = embedded_payload(wrb);
+		*if_handle = le32_to_cpu(resp->interface_id);
+		if (!pmac_invalid)
+			*pmac_id = le32_to_cpu(resp->pmac_id);
+	}
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 interface_id)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_if_destroy *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_NTWK_INTERFACE_DESTROY, sizeof(*req));
+
+	req->interface_id = cpu_to_le32(interface_id);
+	status = be_mbox_db_ring(ctrl);
+
+	spin_unlock(&ctrl->cmd_lock);
+
+	return status;
+}
+
+/* Get stats is a non embedded command: the request is not embedded inside
+ * WRB but is a separate dma memory block
+ */
+int be_cmd_get_stats(struct be_ctrl_info *ctrl, struct be_dma_mem *nonemb_cmd)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_get_stats *req = nonemb_cmd->va;
+	struct be_sge *sge = nonembedded_sgl(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	memset(req, 0, sizeof(*req));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+		OPCODE_ETH_GET_STATISTICS, sizeof(*req));
+	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+	sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(nonemb_cmd->size);
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_get_stats *resp = nonemb_cmd->va;
+		be_dws_le_to_cpu(&resp->hw_stats, sizeof(resp->hw_stats));
+	}
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
+			struct be_link_info *link)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_link_status *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_NTWK_LINK_STATUS_QUERY, sizeof(*req));
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
+		link->speed = resp->mac_speed;
+		link->duplex = resp->mac_duplex;
+		link->fault = resp->mac_fault;
+	} else {
+		link->speed = PHY_LINK_SPEED_ZERO;
+	}
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_get_fw_version *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_GET_FW_VERSION, sizeof(*req));
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_get_fw_version *resp = embedded_payload(wrb);
+		strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
+	}
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+/* set the EQ delay interval of an EQ to specified value */
+int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_modify_eq_delay *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_MODIFY_EQ_DELAY, sizeof(*req));
+
+	req->num_eq = cpu_to_le32(1);
+	req->delay[0].eq_id = cpu_to_le32(eq_id);
+	req->delay[0].phase = 0;
+	req->delay[0].delay_multiplier = cpu_to_le32(eqd);
+
+	status = be_mbox_db_ring(ctrl);
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id, u16 *vtag_array,
+			u32 num, bool untagged, bool promiscuous)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_vlan_config *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_NTWK_VLAN_CONFIG, sizeof(*req));
+
+	req->interface_id = if_id;
+	req->promiscuous = promiscuous;
+	req->untagged = untagged;
+	req->num_vlan = num;
+	if (!promiscuous) {
+		memcpy(req->normal_vlan, vtag_array,
+			req->num_vlan * sizeof(vtag_array[0]));
+	}
+
+	status = be_mbox_db_ring(ctrl);
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_promiscuous_config *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+		OPCODE_ETH_PROMISCUOUS, sizeof(*req));
+
+	if (port_num)
+		req->port1_promiscuous = en;
+	else
+		req->port0_promiscuous = en;
+
+	status = be_mbox_db_ring(ctrl);
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id, u8 *mac_table,
+			u32 num, bool promiscuous)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_mcast_mac_config *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_NTWK_MULTICAST_SET, sizeof(*req));
+
+	req->interface_id = if_id;
+	req->promiscuous = promiscuous;
+	if (!promiscuous) {
+		req->num_mac = cpu_to_le16(num);
+		if (num)
+			memcpy(req->mac, mac_table, ETH_ALEN * num);
+	}
+
+	status = be_mbox_db_ring(ctrl);
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_set_flow_control *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_SET_FLOW_CONTROL, sizeof(*req));
+
+	req->tx_flow_control = cpu_to_le16((u16)tx_fc);
+	req->rx_flow_control = cpu_to_le16((u16)rx_fc);
+
+	status = be_mbox_db_ring(ctrl);
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_get_flow_control(struct be_ctrl_info *ctrl, u32 *tx_fc, u32 *rx_fc)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_get_flow_control *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_GET_FLOW_CONTROL, sizeof(*req));
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_get_flow_control *resp =
+						embedded_payload(wrb);
+		*tx_fc = le16_to_cpu(resp->tx_flow_control);
+		*rx_fc = le16_to_cpu(resp->rx_flow_control);
+	}
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
+
+int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_cmd_req_query_fw_cfg *req = embedded_payload(wrb);
+	int status;
+
+	spin_lock(&ctrl->cmd_lock);
+
+	memset(wrb, 0, sizeof(*wrb));
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
+
+	status = be_mbox_db_ring(ctrl);
+	if (!status) {
+		struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb);
+		*port_num = le32_to_cpu(resp->phys_port);
+	}
+
+	spin_unlock(&ctrl->cmd_lock);
+	return status;
+}
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
new file mode 100644
index 00000000000..e499e2d5b8c
--- /dev/null
+++ b/drivers/net/benet/be_cmds.h
@@ -0,0 +1,688 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+/*
+ * The driver sends configuration and managements command requests to the
+ * firmware in the BE. These requests are communicated to the processor
+ * using Work Request Blocks (WRBs) submitted to the MCC-WRB ring or via one
+ * WRB inside a MAILBOX.
+ * The commands are serviced by the ARM processor in the BladeEngine's MPU.
+ */
+
+struct be_sge {
+	u32 pa_lo;
+	u32 pa_hi;
+	u32 len;
+};
+
+#define MCC_WRB_EMBEDDED_MASK	1 	/* bit 0 of dword 0*/
+#define MCC_WRB_SGE_CNT_SHIFT	3	/* bits 3 - 7 of dword 0 */
+#define MCC_WRB_SGE_CNT_MASK	0x1F	/* bits 3 - 7 of dword 0 */
+struct be_mcc_wrb {
+	u32 embedded;		/* dword 0 */
+	u32 payload_length;	/* dword 1 */
+	u32 tag0;		/* dword 2 */
+	u32 tag1;		/* dword 3 */
+	u32 rsvd;		/* dword 4 */
+	union {
+		u8 embedded_payload[236]; /* used by embedded cmds */
+		struct be_sge sgl[19];    /* used by non-embedded cmds */
+	} payload;
+};
+
+#define CQE_FLAGS_VALID_MASK 		(1 << 31)
+#define CQE_FLAGS_ASYNC_MASK 		(1 << 30)
+#define CQE_FLAGS_COMPLETED_MASK 	(1 << 28)
+#define CQE_FLAGS_CONSUMED_MASK 	(1 << 27)
+
+/* Completion Status */
+enum {
+	MCC_STATUS_SUCCESS = 0x0,
+/* The client does not have sufficient privileges to execute the command */
+	MCC_STATUS_INSUFFICIENT_PRIVILEGES = 0x1,
+/* A parameter in the command was invalid. */
+	MCC_STATUS_INVALID_PARAMETER = 0x2,
+/* There are insufficient chip resources to execute the command */
+	MCC_STATUS_INSUFFICIENT_RESOURCES = 0x3,
+/* The command is completing because the queue was getting flushed */
+	MCC_STATUS_QUEUE_FLUSHING = 0x4,
+/* The command is completing with a DMA error */
+	MCC_STATUS_DMA_FAILED = 0x5
+};
+
+#define CQE_STATUS_COMPL_MASK		0xFFFF
+#define CQE_STATUS_COMPL_SHIFT		0	/* bits 0 - 15 */
+#define CQE_STATUS_EXTD_MASK		0xFFFF
+#define CQE_STATUS_EXTD_SHIFT		0	/* bits 0 - 15 */
+
+struct be_mcc_cq_entry {
+	u32 status;		/* dword 0 */
+	u32 tag0;		/* dword 1 */
+	u32 tag1;		/* dword 2 */
+	u32 flags;		/* dword 3 */
+};
+
+struct be_mcc_mailbox {
+	struct be_mcc_wrb wrb;
+	struct be_mcc_cq_entry cqe;
+};
+
+#define CMD_SUBSYSTEM_COMMON	0x1
+#define CMD_SUBSYSTEM_ETH 	0x3
+
+#define OPCODE_COMMON_NTWK_MAC_QUERY			1
+#define OPCODE_COMMON_NTWK_MAC_SET			2
+#define OPCODE_COMMON_NTWK_MULTICAST_SET		3
+#define OPCODE_COMMON_NTWK_VLAN_CONFIG  		4
+#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY		5
+#define OPCODE_COMMON_CQ_CREATE				12
+#define OPCODE_COMMON_EQ_CREATE				13
+#define OPCODE_COMMON_MCC_CREATE        		21
+#define OPCODE_COMMON_NTWK_RX_FILTER    		34
+#define OPCODE_COMMON_GET_FW_VERSION			35
+#define OPCODE_COMMON_SET_FLOW_CONTROL			36
+#define OPCODE_COMMON_GET_FLOW_CONTROL			37
+#define OPCODE_COMMON_SET_FRAME_SIZE			39
+#define OPCODE_COMMON_MODIFY_EQ_DELAY			41
+#define OPCODE_COMMON_FIRMWARE_CONFIG			42
+#define OPCODE_COMMON_NTWK_INTERFACE_CREATE 		50
+#define OPCODE_COMMON_NTWK_INTERFACE_DESTROY 		51
+#define OPCODE_COMMON_CQ_DESTROY        		54
+#define OPCODE_COMMON_EQ_DESTROY        		55
+#define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG		58
+#define OPCODE_COMMON_NTWK_PMAC_ADD			59
+#define OPCODE_COMMON_NTWK_PMAC_DEL			60
+
+#define OPCODE_ETH_ACPI_CONFIG				2
+#define OPCODE_ETH_PROMISCUOUS				3
+#define OPCODE_ETH_GET_STATISTICS			4
+#define OPCODE_ETH_TX_CREATE				7
+#define OPCODE_ETH_RX_CREATE            		8
+#define OPCODE_ETH_TX_DESTROY           		9
+#define OPCODE_ETH_RX_DESTROY           		10
+
+struct be_cmd_req_hdr {
+	u8 opcode;		/* dword 0 */
+	u8 subsystem;		/* dword 0 */
+	u8 port_number;		/* dword 0 */
+	u8 domain;		/* dword 0 */
+	u32 timeout;		/* dword 1 */
+	u32 request_length;	/* dword 2 */
+	u32 rsvd;		/* dword 3 */
+};
+
+#define RESP_HDR_INFO_OPCODE_SHIFT	0	/* bits 0 - 7 */
+#define RESP_HDR_INFO_SUBSYS_SHIFT	8 	/* bits 8 - 15 */
+struct be_cmd_resp_hdr {
+	u32 info;		/* dword 0 */
+	u32 status;		/* dword 1 */
+	u32 response_length;	/* dword 2 */
+	u32 actual_resp_len;	/* dword 3 */
+};
+
+struct phys_addr {
+	u32 lo;
+	u32 hi;
+};
+
+/**************************
+ * BE Command definitions *
+ **************************/
+
+/* Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field */
+struct amap_eq_context {
+	u8 cidx[13];		/* dword 0*/
+	u8 rsvd0[3];		/* dword 0*/
+	u8 epidx[13];		/* dword 0*/
+	u8 valid;		/* dword 0*/
+	u8 rsvd1;		/* dword 0*/
+	u8 size;		/* dword 0*/
+	u8 pidx[13];		/* dword 1*/
+	u8 rsvd2[3];		/* dword 1*/
+	u8 pd[10];		/* dword 1*/
+	u8 count[3];		/* dword 1*/
+	u8 solevent;		/* dword 1*/
+	u8 stalled;		/* dword 1*/
+	u8 armed;		/* dword 1*/
+	u8 rsvd3[4];		/* dword 2*/
+	u8 func[8];		/* dword 2*/
+	u8 rsvd4;		/* dword 2*/
+	u8 delaymult[10];	/* dword 2*/
+	u8 rsvd5[2];		/* dword 2*/
+	u8 phase[2];		/* dword 2*/
+	u8 nodelay;		/* dword 2*/
+	u8 rsvd6[4];		/* dword 2*/
+	u8 rsvd7[32];		/* dword 3*/
+} __packed;
+
+struct be_cmd_req_eq_create {
+	struct be_cmd_req_hdr hdr;
+	u16 num_pages;		/* sword */
+	u16 rsvd0;		/* sword */
+	u8 context[sizeof(struct amap_eq_context) / 8];
+	struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_eq_create {
+	struct be_cmd_resp_hdr resp_hdr;
+	u16 eq_id;		/* sword */
+	u16 rsvd0;		/* sword */
+} __packed;
+
+/******************** Mac query ***************************/
+enum {
+	MAC_ADDRESS_TYPE_STORAGE = 0x0,
+	MAC_ADDRESS_TYPE_NETWORK = 0x1,
+	MAC_ADDRESS_TYPE_PD = 0x2,
+	MAC_ADDRESS_TYPE_MANAGEMENT = 0x3
+};
+
+struct mac_addr {
+	u16 size_of_struct;
+	u8 addr[ETH_ALEN];
+} __packed;
+
+struct be_cmd_req_mac_query {
+	struct be_cmd_req_hdr hdr;
+	u8 type;
+	u8 permanent;
+	u16 if_id;
+} __packed;
+
+struct be_cmd_resp_mac_query {
+	struct be_cmd_resp_hdr hdr;
+	struct mac_addr mac;
+};
+
+/******************** PMac Add ***************************/
+struct be_cmd_req_pmac_add {
+	struct be_cmd_req_hdr hdr;
+	u32 if_id;
+	u8 mac_address[ETH_ALEN];
+	u8 rsvd0[2];
+} __packed;
+
+struct be_cmd_resp_pmac_add {
+	struct be_cmd_resp_hdr hdr;
+	u32 pmac_id;
+};
+
+/******************** PMac Del ***************************/
+struct be_cmd_req_pmac_del {
+	struct be_cmd_req_hdr hdr;
+	u32 if_id;
+	u32 pmac_id;
+};
+
+/******************** Create CQ ***************************/
+/* Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field */
+struct amap_cq_context {
+	u8 cidx[11];		/* dword 0*/
+	u8 rsvd0;		/* dword 0*/
+	u8 coalescwm[2];	/* dword 0*/
+	u8 nodelay;		/* dword 0*/
+	u8 epidx[11];		/* dword 0*/
+	u8 rsvd1;		/* dword 0*/
+	u8 count[2];		/* dword 0*/
+	u8 valid;		/* dword 0*/
+	u8 solevent;		/* dword 0*/
+	u8 eventable;		/* dword 0*/
+	u8 pidx[11];		/* dword 1*/
+	u8 rsvd2;		/* dword 1*/
+	u8 pd[10];		/* dword 1*/
+	u8 eqid[8];		/* dword 1*/
+	u8 stalled;		/* dword 1*/
+	u8 armed;		/* dword 1*/
+	u8 rsvd3[4];		/* dword 2*/
+	u8 func[8];		/* dword 2*/
+	u8 rsvd4[20];		/* dword 2*/
+	u8 rsvd5[32];		/* dword 3*/
+} __packed;
+
+struct be_cmd_req_cq_create {
+	struct be_cmd_req_hdr hdr;
+	u16 num_pages;
+	u16 rsvd0;
+	u8 context[sizeof(struct amap_cq_context) / 8];
+	struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_cq_create {
+	struct be_cmd_resp_hdr hdr;
+	u16 cq_id;
+	u16 rsvd0;
+} __packed;
+
+/******************** Create TxQ ***************************/
+#define BE_ETH_TX_RING_TYPE_STANDARD    	2
+#define BE_ULP1_NUM				1
+
+/* Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field */
+struct amap_tx_context {
+	u8 rsvd0[16];		/* dword 0 */
+	u8 tx_ring_size[4];	/* dword 0 */
+	u8 rsvd1[26];		/* dword 0 */
+	u8 pci_func_id[8];	/* dword 1 */
+	u8 rsvd2[9];		/* dword 1 */
+	u8 ctx_valid;		/* dword 1 */
+	u8 cq_id_send[16];	/* dword 2 */
+	u8 rsvd3[16];		/* dword 2 */
+	u8 rsvd4[32];		/* dword 3 */
+	u8 rsvd5[32];		/* dword 4 */
+	u8 rsvd6[32];		/* dword 5 */
+	u8 rsvd7[32];		/* dword 6 */
+	u8 rsvd8[32];		/* dword 7 */
+	u8 rsvd9[32];		/* dword 8 */
+	u8 rsvd10[32];		/* dword 9 */
+	u8 rsvd11[32];		/* dword 10 */
+	u8 rsvd12[32];		/* dword 11 */
+	u8 rsvd13[32];		/* dword 12 */
+	u8 rsvd14[32];		/* dword 13 */
+	u8 rsvd15[32];		/* dword 14 */
+	u8 rsvd16[32];		/* dword 15 */
+} __packed;
+
+struct be_cmd_req_eth_tx_create {
+	struct be_cmd_req_hdr hdr;
+	u8 num_pages;
+	u8 ulp_num;
+	u8 type;
+	u8 bound_port;
+	u8 context[sizeof(struct amap_tx_context) / 8];
+	struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_eth_tx_create {
+	struct be_cmd_resp_hdr hdr;
+	u16 cid;
+	u16 rsvd0;
+} __packed;
+
+/******************** Create RxQ ***************************/
+struct be_cmd_req_eth_rx_create {
+	struct be_cmd_req_hdr hdr;
+	u16 cq_id;
+	u8 frag_size;
+	u8 num_pages;
+	struct phys_addr pages[2];
+	u32 interface_id;
+	u16 max_frame_size;
+	u16 rsvd0;
+	u32 rss_queue;
+} __packed;
+
+struct be_cmd_resp_eth_rx_create {
+	struct be_cmd_resp_hdr hdr;
+	u16 id;
+	u8 cpu_id;
+	u8 rsvd0;
+} __packed;
+
+/******************** Q Destroy  ***************************/
+/* Type of Queue to be destroyed */
+enum {
+	QTYPE_EQ = 1,
+	QTYPE_CQ,
+	QTYPE_TXQ,
+	QTYPE_RXQ
+};
+
+struct be_cmd_req_q_destroy {
+	struct be_cmd_req_hdr hdr;
+	u16 id;
+	u16 bypass_flush;	/* valid only for rx q destroy */
+} __packed;
+
+/************ I/f Create (it's actually I/f Config Create)**********/
+
+/* Capability flags for the i/f */
+enum be_if_flags {
+	BE_IF_FLAGS_RSS = 0x4,
+	BE_IF_FLAGS_PROMISCUOUS = 0x8,
+	BE_IF_FLAGS_BROADCAST = 0x10,
+	BE_IF_FLAGS_UNTAGGED = 0x20,
+	BE_IF_FLAGS_ULP = 0x40,
+	BE_IF_FLAGS_VLAN_PROMISCUOUS = 0x80,
+	BE_IF_FLAGS_VLAN = 0x100,
+	BE_IF_FLAGS_MCAST_PROMISCUOUS = 0x200,
+	BE_IF_FLAGS_PASS_L2_ERRORS = 0x400,
+	BE_IF_FLAGS_PASS_L3L4_ERRORS = 0x800
+};
+
+/* An RX interface is an object with one or more MAC addresses and
+ * filtering capabilities. */
+struct be_cmd_req_if_create {
+	struct be_cmd_req_hdr hdr;
+	u32 version;		/* ignore currntly */
+	u32 capability_flags;
+	u32 enable_flags;
+	u8 mac_addr[ETH_ALEN];
+	u8 rsvd0;
+	u8 pmac_invalid; /* if set, don't attach the mac addr to the i/f */
+	u32 vlan_tag;	 /* not used currently */
+} __packed;
+
+struct be_cmd_resp_if_create {
+	struct be_cmd_resp_hdr hdr;
+	u32 interface_id;
+	u32 pmac_id;
+};
+
+/****** I/f Destroy(it's actually I/f Config Destroy )**********/
+struct be_cmd_req_if_destroy {
+	struct be_cmd_req_hdr hdr;
+	u32 interface_id;
+};
+
+/*************** HW Stats Get **********************************/
+struct be_port_rxf_stats {
+	u32 rx_bytes_lsd;	/* dword 0*/
+	u32 rx_bytes_msd;	/* dword 1*/
+	u32 rx_total_frames;	/* dword 2*/
+	u32 rx_unicast_frames;	/* dword 3*/
+	u32 rx_multicast_frames;	/* dword 4*/
+	u32 rx_broadcast_frames;	/* dword 5*/
+	u32 rx_crc_errors;	/* dword 6*/
+	u32 rx_alignment_symbol_errors;	/* dword 7*/
+	u32 rx_pause_frames;	/* dword 8*/
+	u32 rx_control_frames;	/* dword 9*/
+	u32 rx_in_range_errors;	/* dword 10*/
+	u32 rx_out_range_errors;	/* dword 11*/
+	u32 rx_frame_too_long;	/* dword 12*/
+	u32 rx_address_match_errors;	/* dword 13*/
+	u32 rx_vlan_mismatch;	/* dword 14*/
+	u32 rx_dropped_too_small;	/* dword 15*/
+	u32 rx_dropped_too_short;	/* dword 16*/
+	u32 rx_dropped_header_too_small;	/* dword 17*/
+	u32 rx_dropped_tcp_length;	/* dword 18*/
+	u32 rx_dropped_runt;	/* dword 19*/
+	u32 rx_64_byte_packets;	/* dword 20*/
+	u32 rx_65_127_byte_packets;	/* dword 21*/
+	u32 rx_128_256_byte_packets;	/* dword 22*/
+	u32 rx_256_511_byte_packets;	/* dword 23*/
+	u32 rx_512_1023_byte_packets;	/* dword 24*/
+	u32 rx_1024_1518_byte_packets;	/* dword 25*/
+	u32 rx_1519_2047_byte_packets;	/* dword 26*/
+	u32 rx_2048_4095_byte_packets;	/* dword 27*/
+	u32 rx_4096_8191_byte_packets;	/* dword 28*/
+	u32 rx_8192_9216_byte_packets;	/* dword 29*/
+	u32 rx_ip_checksum_errs;	/* dword 30*/
+	u32 rx_tcp_checksum_errs;	/* dword 31*/
+	u32 rx_udp_checksum_errs;	/* dword 32*/
+	u32 rx_non_rss_packets;	/* dword 33*/
+	u32 rx_ipv4_packets;	/* dword 34*/
+	u32 rx_ipv6_packets;	/* dword 35*/
+	u32 rx_ipv4_bytes_lsd;	/* dword 36*/
+	u32 rx_ipv4_bytes_msd;	/* dword 37*/
+	u32 rx_ipv6_bytes_lsd;	/* dword 38*/
+	u32 rx_ipv6_bytes_msd;	/* dword 39*/
+	u32 rx_chute1_packets;	/* dword 40*/
+	u32 rx_chute2_packets;	/* dword 41*/
+	u32 rx_chute3_packets;	/* dword 42*/
+	u32 rx_management_packets;	/* dword 43*/
+	u32 rx_switched_unicast_packets;	/* dword 44*/
+	u32 rx_switched_multicast_packets;	/* dword 45*/
+	u32 rx_switched_broadcast_packets;	/* dword 46*/
+	u32 tx_bytes_lsd;	/* dword 47*/
+	u32 tx_bytes_msd;	/* dword 48*/
+	u32 tx_unicastframes;	/* dword 49*/
+	u32 tx_multicastframes;	/* dword 50*/
+	u32 tx_broadcastframes;	/* dword 51*/
+	u32 tx_pauseframes;	/* dword 52*/
+	u32 tx_controlframes;	/* dword 53*/
+	u32 tx_64_byte_packets;	/* dword 54*/
+	u32 tx_65_127_byte_packets;	/* dword 55*/
+	u32 tx_128_256_byte_packets;	/* dword 56*/
+	u32 tx_256_511_byte_packets;	/* dword 57*/
+	u32 tx_512_1023_byte_packets;	/* dword 58*/
+	u32 tx_1024_1518_byte_packets;	/* dword 59*/
+	u32 tx_1519_2047_byte_packets;	/* dword 60*/
+	u32 tx_2048_4095_byte_packets;	/* dword 61*/
+	u32 tx_4096_8191_byte_packets;	/* dword 62*/
+	u32 tx_8192_9216_byte_packets;	/* dword 63*/
+	u32 rx_fifo_overflow;	/* dword 64*/
+	u32 rx_input_fifo_overflow;	/* dword 65*/
+};
+
+struct be_rxf_stats {
+	struct be_port_rxf_stats port[2];
+	u32 rx_drops_no_pbuf;	/* dword 132*/
+	u32 rx_drops_no_txpb;	/* dword 133*/
+	u32 rx_drops_no_erx_descr;	/* dword 134*/
+	u32 rx_drops_no_tpre_descr;	/* dword 135*/
+	u32 management_rx_port_packets;	/* dword 136*/
+	u32 management_rx_port_bytes;	/* dword 137*/
+	u32 management_rx_port_pause_frames;	/* dword 138*/
+	u32 management_rx_port_errors;	/* dword 139*/
+	u32 management_tx_port_packets;	/* dword 140*/
+	u32 management_tx_port_bytes;	/* dword 141*/
+	u32 management_tx_port_pause;	/* dword 142*/
+	u32 management_rx_port_rxfifo_overflow;	/* dword 143*/
+	u32 rx_drops_too_many_frags;	/* dword 144*/
+	u32 rx_drops_invalid_ring;	/* dword 145*/
+	u32 forwarded_packets;	/* dword 146*/
+	u32 rx_drops_mtu;	/* dword 147*/
+	u32 rsvd0[15];
+};
+
+struct be_erx_stats {
+	u32 rx_drops_no_fragments[44];     /* dwordS 0 to 43*/
+	u32 debug_wdma_sent_hold;          /* dword 44*/
+	u32 debug_wdma_pbfree_sent_hold;   /* dword 45*/
+	u32 debug_wdma_zerobyte_pbfree_sent_hold; /* dword 46*/
+	u32 debug_pmem_pbuf_dealloc;       /* dword 47*/
+};
+
+struct be_hw_stats {
+	struct be_rxf_stats rxf;
+	u32 rsvd[48];
+	struct be_erx_stats erx;
+};
+
+struct be_cmd_req_get_stats {
+	struct be_cmd_req_hdr hdr;
+	u8 rsvd[sizeof(struct be_hw_stats)];
+};
+
+struct be_cmd_resp_get_stats {
+	struct be_cmd_resp_hdr hdr;
+	struct be_hw_stats hw_stats;
+};
+
+struct be_cmd_req_vlan_config {
+	struct be_cmd_req_hdr hdr;
+	u8 interface_id;
+	u8 promiscuous;
+	u8 untagged;
+	u8 num_vlan;
+	u16 normal_vlan[64];
+} __packed;
+
+struct be_cmd_req_promiscuous_config {
+	struct be_cmd_req_hdr hdr;
+	u8 port0_promiscuous;
+	u8 port1_promiscuous;
+	u16 rsvd0;
+} __packed;
+
+struct macaddr {
+	u8 byte[ETH_ALEN];
+};
+
+struct be_cmd_req_mcast_mac_config {
+	struct be_cmd_req_hdr hdr;
+	u16 num_mac;
+	u8 promiscuous;
+	u8 interface_id;
+	struct macaddr mac[32];
+} __packed;
+
+static inline struct be_hw_stats *
+hw_stats_from_cmd(struct be_cmd_resp_get_stats *cmd)
+{
+	return &cmd->hw_stats;
+}
+
+/******************** Link Status Query *******************/
+struct be_cmd_req_link_status {
+	struct be_cmd_req_hdr hdr;
+	u32 rsvd;
+};
+
+struct be_link_info {
+	u8 duplex;
+	u8 speed;
+	u8 fault;
+};
+
+enum {
+	PHY_LINK_DUPLEX_NONE = 0x0,
+	PHY_LINK_DUPLEX_HALF = 0x1,
+	PHY_LINK_DUPLEX_FULL = 0x2
+};
+
+enum {
+	PHY_LINK_SPEED_ZERO = 0x0, 	/* => No link */
+	PHY_LINK_SPEED_10MBPS = 0x1,
+	PHY_LINK_SPEED_100MBPS = 0x2,
+	PHY_LINK_SPEED_1GBPS = 0x3,
+	PHY_LINK_SPEED_10GBPS = 0x4
+};
+
+struct be_cmd_resp_link_status {
+	struct be_cmd_resp_hdr hdr;
+	u8 physical_port;
+	u8 mac_duplex;
+	u8 mac_speed;
+	u8 mac_fault;
+	u8 mgmt_mac_duplex;
+	u8 mgmt_mac_speed;
+	u16 rsvd0;
+} __packed;
+
+/******************** Get FW Version *******************/
+#define FW_VER_LEN			32
+struct be_cmd_req_get_fw_version {
+	struct be_cmd_req_hdr hdr;
+	u8 rsvd0[FW_VER_LEN];
+	u8 rsvd1[FW_VER_LEN];
+} __packed;
+
+struct be_cmd_resp_get_fw_version {
+	struct be_cmd_resp_hdr hdr;
+	u8 firmware_version_string[FW_VER_LEN];
+	u8 fw_on_flash_version_string[FW_VER_LEN];
+} __packed;
+
+/******************** Set Flow Contrl *******************/
+struct be_cmd_req_set_flow_control {
+	struct be_cmd_req_hdr hdr;
+	u16 tx_flow_control;
+	u16 rx_flow_control;
+} __packed;
+
+/******************** Get Flow Contrl *******************/
+struct be_cmd_req_get_flow_control {
+	struct be_cmd_req_hdr hdr;
+	u32 rsvd;
+};
+
+struct be_cmd_resp_get_flow_control {
+	struct be_cmd_resp_hdr hdr;
+	u16 tx_flow_control;
+	u16 rx_flow_control;
+} __packed;
+
+/******************** Modify EQ Delay *******************/
+struct be_cmd_req_modify_eq_delay {
+	struct be_cmd_req_hdr hdr;
+	u32 num_eq;
+	struct {
+		u32 eq_id;
+		u32 phase;
+		u32 delay_multiplier;
+	} delay[8];
+} __packed;
+
+struct be_cmd_resp_modify_eq_delay {
+	struct be_cmd_resp_hdr hdr;
+	u32 rsvd0;
+} __packed;
+
+/******************** Get FW Config *******************/
+struct be_cmd_req_query_fw_cfg {
+	struct be_cmd_req_hdr hdr;
+	u32 rsvd[30];
+};
+
+struct be_cmd_resp_query_fw_cfg {
+	struct be_cmd_resp_hdr hdr;
+	u32 be_config_number;
+	u32 asic_revision;
+	u32 phys_port;
+	u32 function_mode;
+	u32 rsvd[26];
+};
+
+extern int be_pci_fnum_get(struct be_ctrl_info *ctrl);
+extern int be_cmd_POST(struct be_ctrl_info *ctrl);
+extern int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
+			u8 type, bool permanent, u32 if_handle);
+extern int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
+			u32 if_id, u32 *pmac_id);
+extern int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id);
+extern int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 if_flags, u8 *mac,
+			bool pmac_invalid, u32 *if_handle, u32 *pmac_id);
+extern int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 if_handle);
+extern int be_cmd_eq_create(struct be_ctrl_info *ctrl,
+			struct be_queue_info *eq, int eq_delay);
+extern int be_cmd_cq_create(struct be_ctrl_info *ctrl,
+			struct be_queue_info *cq, struct be_queue_info *eq,
+			bool sol_evts, bool no_delay,
+			int num_cqe_dma_coalesce);
+extern int be_cmd_txq_create(struct be_ctrl_info *ctrl,
+			struct be_queue_info *txq,
+			struct be_queue_info *cq);
+extern int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
+			struct be_queue_info *rxq, u16 cq_id,
+			u16 frag_size, u16 max_frame_size, u32 if_id,
+			u32 rss);
+extern int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+			int type);
+extern int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
+			struct be_link_info *link);
+extern int be_cmd_reset(struct be_ctrl_info *ctrl);
+extern int be_cmd_get_stats(struct be_ctrl_info *ctrl,
+			struct be_dma_mem *nonemb_cmd);
+extern int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver);
+
+extern int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd);
+extern int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id,
+			u16 *vtag_array, u32 num, bool untagged,
+			bool promiscuous);
+extern int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl,
+			u8 port_num, bool en);
+extern int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id,
+			u8 *mac_table, u32 num, bool promiscuous);
+extern int be_cmd_set_flow_control(struct be_ctrl_info *ctrl,
+			u32 tx_fc, u32 rx_fc);
+extern int be_cmd_get_flow_control(struct be_ctrl_info *ctrl,
+			u32 *tx_fc, u32 *rx_fc);
+extern int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
new file mode 100644
index 00000000000..04f4b73fa8d
--- /dev/null
+++ b/drivers/net/benet/be_ethtool.c
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#include "be.h"
+#include <linux/ethtool.h>
+
+struct be_ethtool_stat {
+	char desc[ETH_GSTRING_LEN];
+	int type;
+	int size;
+	int offset;
+};
+
+enum {NETSTAT, PORTSTAT, MISCSTAT, DRVSTAT, ERXSTAT};
+#define FIELDINFO(_struct, field) FIELD_SIZEOF(_struct, field), \
+					offsetof(_struct, field)
+#define NETSTAT_INFO(field) 	#field, NETSTAT,\
+					FIELDINFO(struct net_device_stats,\
+						field)
+#define DRVSTAT_INFO(field) 	#field, DRVSTAT,\
+					FIELDINFO(struct be_drvr_stats, field)
+#define MISCSTAT_INFO(field) 	#field, MISCSTAT,\
+					FIELDINFO(struct be_rxf_stats, field)
+#define PORTSTAT_INFO(field) 	#field, PORTSTAT,\
+					FIELDINFO(struct be_port_rxf_stats, \
+						field)
+#define ERXSTAT_INFO(field) 	#field, ERXSTAT,\
+					FIELDINFO(struct be_erx_stats, field)
+
+static const struct be_ethtool_stat et_stats[] = {
+	{NETSTAT_INFO(rx_packets)},
+	{NETSTAT_INFO(tx_packets)},
+	{NETSTAT_INFO(rx_bytes)},
+	{NETSTAT_INFO(tx_bytes)},
+	{NETSTAT_INFO(rx_errors)},
+	{NETSTAT_INFO(tx_errors)},
+	{NETSTAT_INFO(rx_dropped)},
+	{NETSTAT_INFO(tx_dropped)},
+	{DRVSTAT_INFO(be_tx_reqs)},
+	{DRVSTAT_INFO(be_tx_stops)},
+	{DRVSTAT_INFO(be_fwd_reqs)},
+	{DRVSTAT_INFO(be_tx_wrbs)},
+	{DRVSTAT_INFO(be_polls)},
+	{DRVSTAT_INFO(be_tx_events)},
+	{DRVSTAT_INFO(be_rx_events)},
+	{DRVSTAT_INFO(be_tx_compl)},
+	{DRVSTAT_INFO(be_rx_compl)},
+	{DRVSTAT_INFO(be_ethrx_post_fail)},
+	{DRVSTAT_INFO(be_802_3_dropped_frames)},
+	{DRVSTAT_INFO(be_802_3_malformed_frames)},
+	{DRVSTAT_INFO(be_tx_rate)},
+	{DRVSTAT_INFO(be_rx_rate)},
+	{PORTSTAT_INFO(rx_unicast_frames)},
+	{PORTSTAT_INFO(rx_multicast_frames)},
+	{PORTSTAT_INFO(rx_broadcast_frames)},
+	{PORTSTAT_INFO(rx_crc_errors)},
+	{PORTSTAT_INFO(rx_alignment_symbol_errors)},
+	{PORTSTAT_INFO(rx_pause_frames)},
+	{PORTSTAT_INFO(rx_control_frames)},
+	{PORTSTAT_INFO(rx_in_range_errors)},
+	{PORTSTAT_INFO(rx_out_range_errors)},
+	{PORTSTAT_INFO(rx_frame_too_long)},
+	{PORTSTAT_INFO(rx_address_match_errors)},
+	{PORTSTAT_INFO(rx_vlan_mismatch)},
+	{PORTSTAT_INFO(rx_dropped_too_small)},
+	{PORTSTAT_INFO(rx_dropped_too_short)},
+	{PORTSTAT_INFO(rx_dropped_header_too_small)},
+	{PORTSTAT_INFO(rx_dropped_tcp_length)},
+	{PORTSTAT_INFO(rx_dropped_runt)},
+	{PORTSTAT_INFO(rx_fifo_overflow)},
+	{PORTSTAT_INFO(rx_input_fifo_overflow)},
+	{PORTSTAT_INFO(rx_ip_checksum_errs)},
+	{PORTSTAT_INFO(rx_tcp_checksum_errs)},
+	{PORTSTAT_INFO(rx_udp_checksum_errs)},
+	{PORTSTAT_INFO(rx_non_rss_packets)},
+	{PORTSTAT_INFO(rx_ipv4_packets)},
+	{PORTSTAT_INFO(rx_ipv6_packets)},
+	{PORTSTAT_INFO(tx_unicastframes)},
+	{PORTSTAT_INFO(tx_multicastframes)},
+	{PORTSTAT_INFO(tx_broadcastframes)},
+	{PORTSTAT_INFO(tx_pauseframes)},
+	{PORTSTAT_INFO(tx_controlframes)},
+	{MISCSTAT_INFO(rx_drops_no_pbuf)},
+	{MISCSTAT_INFO(rx_drops_no_txpb)},
+	{MISCSTAT_INFO(rx_drops_no_erx_descr)},
+	{MISCSTAT_INFO(rx_drops_no_tpre_descr)},
+	{MISCSTAT_INFO(rx_drops_too_many_frags)},
+	{MISCSTAT_INFO(rx_drops_invalid_ring)},
+	{MISCSTAT_INFO(forwarded_packets)},
+	{MISCSTAT_INFO(rx_drops_mtu)},
+	{ERXSTAT_INFO(rx_drops_no_fragments)},
+};
+#define ETHTOOL_STATS_NUM ARRAY_SIZE(et_stats)
+
+static void
+be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	strcpy(drvinfo->driver, DRV_NAME);
+	strcpy(drvinfo->version, DRV_VER);
+	strncpy(drvinfo->fw_version, adapter->fw_ver, FW_VER_LEN);
+	strcpy(drvinfo->bus_info, pci_name(adapter->pdev));
+	drvinfo->testinfo_len = 0;
+	drvinfo->regdump_len = 0;
+	drvinfo->eedump_len = 0;
+}
+
+static int
+be_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_eq_obj *rx_eq = &adapter->rx_eq;
+	struct be_eq_obj *tx_eq = &adapter->tx_eq;
+
+	coalesce->rx_max_coalesced_frames = adapter->max_rx_coal;
+
+	coalesce->rx_coalesce_usecs = rx_eq->cur_eqd;
+	coalesce->rx_coalesce_usecs_high = rx_eq->max_eqd;
+	coalesce->rx_coalesce_usecs_low = rx_eq->min_eqd;
+
+	coalesce->tx_coalesce_usecs = tx_eq->cur_eqd;
+	coalesce->tx_coalesce_usecs_high = tx_eq->max_eqd;
+	coalesce->tx_coalesce_usecs_low = tx_eq->min_eqd;
+
+	coalesce->use_adaptive_rx_coalesce = rx_eq->enable_aic;
+	coalesce->use_adaptive_tx_coalesce = tx_eq->enable_aic;
+
+	return 0;
+}
+
+/*
+ * This routine is used to set interrup coalescing delay *as well as*
+ * the number of pkts to coalesce for LRO.
+ */
+static int
+be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	struct be_eq_obj *rx_eq = &adapter->rx_eq;
+	struct be_eq_obj *tx_eq = &adapter->tx_eq;
+	u32 tx_max, tx_min, tx_cur;
+	u32 rx_max, rx_min, rx_cur;
+	int status = 0;
+
+	if (coalesce->use_adaptive_tx_coalesce == 1)
+		return -EINVAL;
+
+	adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
+	if (adapter->max_rx_coal > MAX_SKB_FRAGS)
+		adapter->max_rx_coal = MAX_SKB_FRAGS - 1;
+
+	/* if AIC is being turned on now, start with an EQD of 0 */
+	if (rx_eq->enable_aic == 0 &&
+		coalesce->use_adaptive_rx_coalesce == 1) {
+		rx_eq->cur_eqd = 0;
+	}
+	rx_eq->enable_aic = coalesce->use_adaptive_rx_coalesce;
+
+	rx_max = coalesce->rx_coalesce_usecs_high;
+	rx_min = coalesce->rx_coalesce_usecs_low;
+	rx_cur = coalesce->rx_coalesce_usecs;
+
+	tx_max = coalesce->tx_coalesce_usecs_high;
+	tx_min = coalesce->tx_coalesce_usecs_low;
+	tx_cur = coalesce->tx_coalesce_usecs;
+
+	if (tx_cur > BE_MAX_EQD)
+		tx_cur = BE_MAX_EQD;
+	if (tx_eq->cur_eqd != tx_cur) {
+		status = be_cmd_modify_eqd(ctrl, tx_eq->q.id, tx_cur);
+		if (!status)
+			tx_eq->cur_eqd = tx_cur;
+	}
+
+	if (rx_eq->enable_aic) {
+		if (rx_max > BE_MAX_EQD)
+			rx_max = BE_MAX_EQD;
+		if (rx_min > rx_max)
+			rx_min = rx_max;
+		rx_eq->max_eqd = rx_max;
+		rx_eq->min_eqd = rx_min;
+		if (rx_eq->cur_eqd > rx_max)
+			rx_eq->cur_eqd = rx_max;
+		if (rx_eq->cur_eqd < rx_min)
+			rx_eq->cur_eqd = rx_min;
+	} else {
+		if (rx_cur > BE_MAX_EQD)
+			rx_cur = BE_MAX_EQD;
+		if (rx_eq->cur_eqd != rx_cur) {
+			status = be_cmd_modify_eqd(ctrl, rx_eq->q.id, rx_cur);
+			if (!status)
+				rx_eq->cur_eqd = rx_cur;
+		}
+	}
+	return 0;
+}
+
+static u32 be_get_rx_csum(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	return adapter->rx_csum;
+}
+
+static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	if (data)
+		adapter->rx_csum = true;
+	else
+		adapter->rx_csum = false;
+
+	return 0;
+}
+
+static void
+be_get_ethtool_stats(struct net_device *netdev,
+		struct ethtool_stats *stats, uint64_t *data)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_drvr_stats *drvr_stats = &adapter->stats.drvr_stats;
+	struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats.cmd.va);
+	struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
+	struct be_port_rxf_stats *port_stats =
+			&rxf_stats->port[adapter->port_num];
+	struct net_device_stats *net_stats = &adapter->stats.net_stats;
+	struct be_erx_stats *erx_stats = &hw_stats->erx;
+	void *p = NULL;
+	int i;
+
+	for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
+		switch (et_stats[i].type) {
+		case NETSTAT:
+			p = net_stats;
+			break;
+		case DRVSTAT:
+			p = drvr_stats;
+			break;
+		case PORTSTAT:
+			p = port_stats;
+			break;
+		case MISCSTAT:
+			p = rxf_stats;
+			break;
+		case ERXSTAT: /* Currently only one ERX stat is provided */
+			p = (u32 *)erx_stats + adapter->rx_obj.q.id;
+			break;
+		}
+
+		p = (u8 *)p + et_stats[i].offset;
+		data[i] = (et_stats[i].size == sizeof(u64)) ?
+				*(u64 *)p: *(u32 *)p;
+	}
+
+	return;
+}
+
+static void
+be_get_stat_strings(struct net_device *netdev, uint32_t stringset,
+		uint8_t *data)
+{
+	int i;
+	switch (stringset) {
+	case ETH_SS_STATS:
+		for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
+			memcpy(data, et_stats[i].desc, ETH_GSTRING_LEN);
+			data += ETH_GSTRING_LEN;
+		}
+		break;
+	}
+}
+
+static int be_get_stats_count(struct net_device *netdev)
+{
+	return ETHTOOL_STATS_NUM;
+}
+
+static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+	ecmd->speed = SPEED_10000;
+	ecmd->duplex = DUPLEX_FULL;
+	ecmd->autoneg = AUTONEG_DISABLE;
+	return 0;
+}
+
+static void
+be_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	ring->rx_max_pending = adapter->rx_obj.q.len;
+	ring->tx_max_pending = adapter->tx_obj.q.len;
+
+	ring->rx_pending = atomic_read(&adapter->rx_obj.q.used);
+	ring->tx_pending = atomic_read(&adapter->tx_obj.q.used);
+}
+
+static void
+be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	be_cmd_get_flow_control(&adapter->ctrl, &ecmd->tx_pause,
+		&ecmd->rx_pause);
+	ecmd->autoneg = AUTONEG_ENABLE;
+}
+
+static int
+be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	int status;
+
+	if (ecmd->autoneg != AUTONEG_ENABLE)
+		return -EINVAL;
+
+	status = be_cmd_set_flow_control(&adapter->ctrl, ecmd->tx_pause,
+			ecmd->rx_pause);
+	if (!status)
+		dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
+
+	return status;
+}
+
+struct ethtool_ops be_ethtool_ops = {
+	.get_settings = be_get_settings,
+	.get_drvinfo = be_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+	.get_coalesce = be_get_coalesce,
+	.set_coalesce = be_set_coalesce,
+	.get_ringparam = be_get_ringparam,
+	.get_pauseparam = be_get_pauseparam,
+	.set_pauseparam = be_set_pauseparam,
+	.get_rx_csum = be_get_rx_csum,
+	.set_rx_csum = be_set_rx_csum,
+	.get_tx_csum = ethtool_op_get_tx_csum,
+	.set_tx_csum = ethtool_op_set_tx_csum,
+	.get_sg = ethtool_op_get_sg,
+	.set_sg = ethtool_op_set_sg,
+	.get_tso = ethtool_op_get_tso,
+	.set_tso = ethtool_op_set_tso,
+	.get_strings = be_get_stat_strings,
+	.get_stats_count = be_get_stats_count,
+	.get_ethtool_stats = be_get_ethtool_stats,
+};
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
new file mode 100644
index 00000000000..b132aa4893c
--- /dev/null
+++ b/drivers/net/benet/be_hw.h
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+/********* Mailbox door bell *************/
+/* Used for driver communication with the FW.
+ * The software must write this register twice to post any command. First,
+ * it writes the register with hi=1 and the upper bits of the physical address
+ * for the MAILBOX structure. Software must poll the ready bit until this
+ * is acknowledged. Then, sotware writes the register with hi=0 with the lower
+ * bits in the address. It must poll the ready bit until the command is
+ * complete. Upon completion, the MAILBOX will contain a valid completion
+ * queue entry.
+ */
+#define MPU_MAILBOX_DB_OFFSET	0x160
+#define MPU_MAILBOX_DB_RDY_MASK	0x1 	/* bit 0 */
+#define MPU_MAILBOX_DB_HI_MASK	0x2	/* bit 1 */
+
+#define MPU_EP_CONTROL 		0
+
+/********** MPU semphore ******************/
+#define MPU_EP_SEMAPHORE_OFFSET 	0xac
+#define EP_SEMAPHORE_POST_STAGE_MASK	0x0000FFFF
+#define EP_SEMAPHORE_POST_ERR_MASK	0x1
+#define EP_SEMAPHORE_POST_ERR_SHIFT	31
+/* MPU semphore POST stage values */
+#define POST_STAGE_AWAITING_HOST_RDY 	0x1 /* FW awaiting goahead from host */
+#define POST_STAGE_HOST_RDY 		0x2 /* Host has given go-ahed to FW */
+#define POST_STAGE_BE_RESET		0x3 /* Host wants to reset chip */
+#define POST_STAGE_ARMFW_RDY		0xc000	/* FW is done with POST */
+
+/********* Memory BAR register ************/
+#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 	0xfc
+/* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt
+ * Disable" may still globally block interrupts in addition to individual
+ * interrupt masks; a mechanism for the device driver to block all interrupts
+ * atomically without having to arbitrate for the PCI Interrupt Disable bit
+ * with the OS.
+ */
+#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK	(1 << 29) /* bit 29 */
+/* PCI physical function number */
+#define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK  	0x7 	/* bits 26 - 28 */
+#define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT	26
+
+/********* Event Q door bell *************/
+#define DB_EQ_OFFSET			DB_CQ_OFFSET
+#define DB_EQ_RING_ID_MASK		0x1FF	/* bits 0 - 8 */
+/* Clear the interrupt for this eq */
+#define DB_EQ_CLR_SHIFT			(9)	/* bit 9 */
+/* Must be 1 */
+#define DB_EQ_EVNT_SHIFT			(10)	/* bit 10 */
+/* Number of event entries processed */
+#define DB_EQ_NUM_POPPED_SHIFT		(16)	/* bits 16 - 28 */
+/* Rearm bit */
+#define DB_EQ_REARM_SHIFT		(29)	/* bit 29 */
+
+/********* Compl Q door bell *************/
+#define DB_CQ_OFFSET 			0x120
+#define DB_CQ_RING_ID_MASK		0x3FF	/* bits 0 - 9 */
+/* Number of event entries processed */
+#define DB_CQ_NUM_POPPED_SHIFT		(16) 	/* bits 16 - 28 */
+/* Rearm bit */
+#define DB_CQ_REARM_SHIFT		(29) 	/* bit 29 */
+
+/********** TX ULP door bell *************/
+#define DB_TXULP1_OFFSET		0x60
+#define DB_TXULP_RING_ID_MASK		0x7FF	/* bits 0 - 10 */
+/* Number of tx entries posted */
+#define DB_TXULP_NUM_POSTED_SHIFT	(16)	/* bits 16 - 29 */
+#define DB_TXULP_NUM_POSTED_MASK	0x3FFF	/* bits 16 - 29 */
+
+/********** RQ(erx) door bell ************/
+#define DB_RQ_OFFSET 			0x100
+#define DB_RQ_RING_ID_MASK		0x3FF	/* bits 0 - 9 */
+/* Number of rx frags posted */
+#define DB_RQ_NUM_POSTED_SHIFT		(24)	/* bits 24 - 31 */
+
+/*
+ * BE descriptors: host memory data structures whose formats
+ * are hardwired in BE silicon.
+ */
+/* Event Queue Descriptor */
+#define EQ_ENTRY_VALID_MASK 		0x1	/* bit 0 */
+#define EQ_ENTRY_RES_ID_MASK 		0xFFFF	/* bits 16 - 31 */
+#define EQ_ENTRY_RES_ID_SHIFT 		16
+struct be_eq_entry {
+	u32 evt;
+};
+
+/* TX Queue Descriptor */
+#define ETH_WRB_FRAG_LEN_MASK		0xFFFF
+struct be_eth_wrb {
+	u32 frag_pa_hi;		/* dword 0 */
+	u32 frag_pa_lo;		/* dword 1 */
+	u32 rsvd0;		/* dword 2 */
+	u32 frag_len;		/* dword 3: bits 0 - 15 */
+} __packed;
+
+/* Pseudo amap definition for eth_hdr_wrb in which each bit of the
+ * actual structure is defined as a byte : used to calculate
+ * offset/shift/mask of each field */
+struct amap_eth_hdr_wrb {
+	u8 rsvd0[32];		/* dword 0 */
+	u8 rsvd1[32];		/* dword 1 */
+	u8 complete;		/* dword 2 */
+	u8 event;
+	u8 crc;
+	u8 forward;
+	u8 ipsec;
+	u8 mgmt;
+	u8 ipcs;
+	u8 udpcs;
+	u8 tcpcs;
+	u8 lso;
+	u8 vlan;
+	u8 gso[2];
+	u8 num_wrb[5];
+	u8 lso_mss[14];
+	u8 len[16];		/* dword 3 */
+	u8 vlan_tag[16];
+} __packed;
+
+struct be_eth_hdr_wrb {
+	u32 dw[4];
+};
+
+/* TX Compl Queue Descriptor */
+
+/* Pseudo amap definition for eth_tx_compl in which each bit of the
+ * actual structure is defined as a byte: used to calculate
+ * offset/shift/mask of each field */
+struct amap_eth_tx_compl {
+	u8 wrb_index[16];	/* dword 0 */
+	u8 ct[2]; 		/* dword 0 */
+	u8 port[2];		/* dword 0 */
+	u8 rsvd0[8];		/* dword 0 */
+	u8 status[4];		/* dword 0 */
+	u8 user_bytes[16];	/* dword 1 */
+	u8 nwh_bytes[8];	/* dword 1 */
+	u8 lso;			/* dword 1 */
+	u8 cast_enc[2];		/* dword 1 */
+	u8 rsvd1[5];		/* dword 1 */
+	u8 rsvd2[32];		/* dword 2 */
+	u8 pkts[16];		/* dword 3 */
+	u8 ringid[11];		/* dword 3 */
+	u8 hash_val[4];		/* dword 3 */
+	u8 valid;		/* dword 3 */
+} __packed;
+
+struct be_eth_tx_compl {
+	u32 dw[4];
+};
+
+/* RX Queue Descriptor */
+struct be_eth_rx_d {
+	u32 fragpa_hi;
+	u32 fragpa_lo;
+};
+
+/* RX Compl Queue Descriptor */
+
+/* Pseudo amap definition for eth_rx_compl in which each bit of the
+ * actual structure is defined as a byte: used to calculate
+ * offset/shift/mask of each field */
+struct amap_eth_rx_compl {
+	u8 vlan_tag[16];	/* dword 0 */
+	u8 pktsize[14];		/* dword 0 */
+	u8 port;		/* dword 0 */
+	u8 ip_opt;		/* dword 0 */
+	u8 err;			/* dword 1 */
+	u8 rsshp;		/* dword 1 */
+	u8 ipf;			/* dword 1 */
+	u8 tcpf;		/* dword 1 */
+	u8 udpf;		/* dword 1 */
+	u8 ipcksm;		/* dword 1 */
+	u8 l4_cksm;		/* dword 1 */
+	u8 ip_version;		/* dword 1 */
+	u8 macdst[6];		/* dword 1 */
+	u8 vtp;			/* dword 1 */
+	u8 rsvd0;		/* dword 1 */
+	u8 fragndx[10];		/* dword 1 */
+	u8 ct[2];		/* dword 1 */
+	u8 sw;			/* dword 1 */
+	u8 numfrags[3];		/* dword 1 */
+	u8 rss_flush;		/* dword 2 */
+	u8 cast_enc[2];		/* dword 2 */
+	u8 qnq;			/* dword 2 */
+	u8 rss_bank;		/* dword 2 */
+	u8 rsvd1[23];		/* dword 2 */
+	u8 lro_pkt;		/* dword 2 */
+	u8 rsvd2[2];		/* dword 2 */
+	u8 valid;		/* dword 2 */
+	u8 rsshash[32];		/* dword 3 */
+} __packed;
+
+struct be_eth_rx_compl {
+	u32 dw[4];
+};
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
new file mode 100644
index 00000000000..0ecaffb70e5
--- /dev/null
+++ b/drivers/net/benet/be_main.c
@@ -0,0 +1,1911 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#include "be.h"
+
+MODULE_VERSION(DRV_VER);
+MODULE_DEVICE_TABLE(pci, be_dev_ids);
+MODULE_DESCRIPTION(DRV_DESC " " DRV_VER);
+MODULE_AUTHOR("ServerEngines Corporation");
+MODULE_LICENSE("GPL");
+
+static unsigned int rx_frag_size = 2048;
+module_param(rx_frag_size, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
+
+#define BE_VENDOR_ID 		0x19a2
+#define BE2_DEVICE_ID_1 	0x0211
+static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
+	{ PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, be_dev_ids);
+
+static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q)
+{
+	struct be_dma_mem *mem = &q->dma_mem;
+	if (mem->va)
+		pci_free_consistent(adapter->pdev, mem->size,
+			mem->va, mem->dma);
+}
+
+static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q,
+		u16 len, u16 entry_size)
+{
+	struct be_dma_mem *mem = &q->dma_mem;
+
+	memset(q, 0, sizeof(*q));
+	q->len = len;
+	q->entry_size = entry_size;
+	mem->size = len * entry_size;
+	mem->va = pci_alloc_consistent(adapter->pdev, mem->size, &mem->dma);
+	if (!mem->va)
+		return -1;
+	memset(mem->va, 0, mem->size);
+	return 0;
+}
+
+static inline void *queue_head_node(struct be_queue_info *q)
+{
+	return q->dma_mem.va + q->head * q->entry_size;
+}
+
+static inline void *queue_tail_node(struct be_queue_info *q)
+{
+	return q->dma_mem.va + q->tail * q->entry_size;
+}
+
+static inline void queue_head_inc(struct be_queue_info *q)
+{
+	index_inc(&q->head, q->len);
+}
+
+static inline void queue_tail_inc(struct be_queue_info *q)
+{
+	index_inc(&q->tail, q->len);
+}
+
+static void be_intr_set(struct be_ctrl_info *ctrl, bool enable)
+{
+	u8 __iomem *addr = ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
+	u32 reg = ioread32(addr);
+	u32 enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+	if (!enabled && enable) {
+		reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+	} else if (enabled && !enable) {
+		reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+	} else {
+		printk(KERN_WARNING DRV_NAME
+			": bad value in membar_int_ctrl reg=0x%x\n", reg);
+		return;
+	}
+	iowrite32(reg, addr);
+}
+
+static void be_rxq_notify(struct be_ctrl_info *ctrl, u16 qid, u16 posted)
+{
+	u32 val = 0;
+	val |= qid & DB_RQ_RING_ID_MASK;
+	val |= posted << DB_RQ_NUM_POSTED_SHIFT;
+	iowrite32(val, ctrl->db + DB_RQ_OFFSET);
+}
+
+static void be_txq_notify(struct be_ctrl_info *ctrl, u16 qid, u16 posted)
+{
+	u32 val = 0;
+	val |= qid & DB_TXULP_RING_ID_MASK;
+	val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT;
+	iowrite32(val, ctrl->db + DB_TXULP1_OFFSET);
+}
+
+static void be_eq_notify(struct be_ctrl_info *ctrl, u16 qid,
+		bool arm, bool clear_int, u16 num_popped)
+{
+	u32 val = 0;
+	val |= qid & DB_EQ_RING_ID_MASK;
+	if (arm)
+		val |= 1 << DB_EQ_REARM_SHIFT;
+	if (clear_int)
+		val |= 1 << DB_EQ_CLR_SHIFT;
+	val |= 1 << DB_EQ_EVNT_SHIFT;
+	val |= num_popped << DB_EQ_NUM_POPPED_SHIFT;
+	iowrite32(val, ctrl->db + DB_EQ_OFFSET);
+}
+
+static void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid,
+		bool arm, u16 num_popped)
+{
+	u32 val = 0;
+	val |= qid & DB_CQ_RING_ID_MASK;
+	if (arm)
+		val |= 1 << DB_CQ_REARM_SHIFT;
+	val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
+	iowrite32(val, ctrl->db + DB_CQ_OFFSET);
+}
+
+
+static int be_mac_addr_set(struct net_device *netdev, void *p)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+	int status = 0;
+
+	if (netif_running(netdev)) {
+		status = be_cmd_pmac_del(&adapter->ctrl, adapter->if_handle,
+				adapter->pmac_id);
+		if (status)
+			return status;
+
+		status = be_cmd_pmac_add(&adapter->ctrl, (u8 *)addr->sa_data,
+				adapter->if_handle, &adapter->pmac_id);
+	}
+
+	if (!status)
+		memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	return status;
+}
+
+static void netdev_stats_update(struct be_adapter *adapter)
+{
+	struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats.cmd.va);
+	struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
+	struct be_port_rxf_stats *port_stats =
+			&rxf_stats->port[adapter->port_num];
+	struct net_device_stats *dev_stats = &adapter->stats.net_stats;
+
+	dev_stats->rx_packets = port_stats->rx_total_frames;
+	dev_stats->tx_packets = port_stats->tx_unicastframes +
+		port_stats->tx_multicastframes + port_stats->tx_broadcastframes;
+	dev_stats->rx_bytes = (u64) port_stats->rx_bytes_msd << 32 |
+				(u64) port_stats->rx_bytes_lsd;
+	dev_stats->tx_bytes = (u64) port_stats->tx_bytes_msd << 32 |
+				(u64) port_stats->tx_bytes_lsd;
+
+	/* bad pkts received */
+	dev_stats->rx_errors = port_stats->rx_crc_errors +
+		port_stats->rx_alignment_symbol_errors +
+		port_stats->rx_in_range_errors +
+		port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
+
+	/*  packet transmit problems */
+	dev_stats->tx_errors = 0;
+
+	/*  no space in linux buffers */
+	dev_stats->rx_dropped = 0;
+
+	/* no space available in linux */
+	dev_stats->tx_dropped = 0;
+
+	dev_stats->multicast = port_stats->tx_multicastframes;
+	dev_stats->collisions = 0;
+
+	/* detailed rx errors */
+	dev_stats->rx_length_errors = port_stats->rx_in_range_errors +
+		port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
+	/* receive ring buffer overflow */
+	dev_stats->rx_over_errors = 0;
+	dev_stats->rx_crc_errors = port_stats->rx_crc_errors;
+
+	/* frame alignment errors */
+	dev_stats->rx_frame_errors = port_stats->rx_alignment_symbol_errors;
+	/* receiver fifo overrun */
+	/* drops_no_pbuf is no per i/f, it's per BE card */
+	dev_stats->rx_fifo_errors = port_stats->rx_fifo_overflow +
+					port_stats->rx_input_fifo_overflow +
+					rxf_stats->rx_drops_no_pbuf;
+	/* receiver missed packetd */
+	dev_stats->rx_missed_errors = 0;
+	/* detailed tx_errors */
+	dev_stats->tx_aborted_errors = 0;
+	dev_stats->tx_carrier_errors = 0;
+	dev_stats->tx_fifo_errors = 0;
+	dev_stats->tx_heartbeat_errors = 0;
+	dev_stats->tx_window_errors = 0;
+}
+
+static void be_link_status_update(struct be_adapter *adapter)
+{
+	struct be_link_info *prev = &adapter->link;
+	struct be_link_info now = { 0 };
+	struct net_device *netdev = adapter->netdev;
+
+	be_cmd_link_status_query(&adapter->ctrl, &now);
+
+	/* If link came up or went down */
+	if (now.speed != prev->speed && (now.speed == PHY_LINK_SPEED_ZERO ||
+			prev->speed == PHY_LINK_SPEED_ZERO)) {
+		if (now.speed == PHY_LINK_SPEED_ZERO) {
+			netif_stop_queue(netdev);
+			netif_carrier_off(netdev);
+			printk(KERN_INFO "%s: Link down\n", netdev->name);
+		} else {
+			netif_start_queue(netdev);
+			netif_carrier_on(netdev);
+			printk(KERN_INFO "%s: Link up\n", netdev->name);
+		}
+	}
+	*prev = now;
+}
+
+/* Update the EQ delay n BE based on the RX frags consumed / sec */
+static void be_rx_eqd_update(struct be_adapter *adapter)
+{
+	u32 eqd;
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	struct be_eq_obj *rx_eq = &adapter->rx_eq;
+	struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+
+	/* Update once a second */
+	if (((jiffies - stats->rx_fps_jiffies) < HZ) || rx_eq->enable_aic == 0)
+		return;
+
+	stats->be_rx_fps = (stats->be_rx_frags - stats->be_prev_rx_frags) /
+			((jiffies - stats->rx_fps_jiffies) / HZ);
+
+	stats->rx_fps_jiffies = jiffies;
+	stats->be_prev_rx_frags = stats->be_rx_frags;
+	eqd = stats->be_rx_fps / 110000;
+	eqd = eqd << 3;
+	if (eqd > rx_eq->max_eqd)
+		eqd = rx_eq->max_eqd;
+	if (eqd < rx_eq->min_eqd)
+		eqd = rx_eq->min_eqd;
+	if (eqd < 10)
+		eqd = 0;
+	if (eqd != rx_eq->cur_eqd)
+		be_cmd_modify_eqd(ctrl, rx_eq->q.id, eqd);
+
+	rx_eq->cur_eqd = eqd;
+}
+
+static struct net_device_stats *be_get_stats(struct net_device *dev)
+{
+	struct be_adapter *adapter = netdev_priv(dev);
+
+	return &adapter->stats.net_stats;
+}
+
+static void be_tx_stats_update(struct be_adapter *adapter,
+			u32 wrb_cnt, u32 copied, bool stopped)
+{
+	struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+	stats->be_tx_reqs++;
+	stats->be_tx_wrbs += wrb_cnt;
+	stats->be_tx_bytes += copied;
+	if (stopped)
+		stats->be_tx_stops++;
+
+	/* Update tx rate once in two seconds */
+	if ((jiffies - stats->be_tx_jiffies) > 2 * HZ) {
+		u32 r;
+		r = (stats->be_tx_bytes - stats->be_tx_bytes_prev) /
+			((u32) (jiffies - stats->be_tx_jiffies) / HZ);
+		r = (r / 1000000);			/* M bytes/s */
+		stats->be_tx_rate = (r * 8);	/* M bits/s */
+		stats->be_tx_jiffies = jiffies;
+		stats->be_tx_bytes_prev = stats->be_tx_bytes;
+	}
+}
+
+/* Determine number of WRB entries needed to xmit data in an skb */
+static u32 wrb_cnt_for_skb(struct sk_buff *skb, bool *dummy)
+{
+	int cnt = 0;
+	while (skb) {
+		if (skb->len > skb->data_len)
+			cnt++;
+		cnt += skb_shinfo(skb)->nr_frags;
+		skb = skb_shinfo(skb)->frag_list;
+	}
+	/* to account for hdr wrb */
+	cnt++;
+	if (cnt & 1) {
+		/* add a dummy to make it an even num */
+		cnt++;
+		*dummy = true;
+	} else
+		*dummy = false;
+	BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT);
+	return cnt;
+}
+
+static inline void wrb_fill(struct be_eth_wrb *wrb, u64 addr, int len)
+{
+	wrb->frag_pa_hi = upper_32_bits(addr);
+	wrb->frag_pa_lo = addr & 0xFFFFFFFF;
+	wrb->frag_len = len & ETH_WRB_FRAG_LEN_MASK;
+}
+
+static void wrb_fill_hdr(struct be_eth_hdr_wrb *hdr, struct sk_buff *skb,
+		bool vlan, u32 wrb_cnt, u32 len)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	AMAP_SET_BITS(struct amap_eth_hdr_wrb, crc, hdr, 1);
+
+	if (skb_shinfo(skb)->gso_segs > 1 && skb_shinfo(skb)->gso_size) {
+		AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso, hdr, 1);
+		AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso_mss,
+			hdr, skb_shinfo(skb)->gso_size);
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		if (is_tcp_pkt(skb))
+			AMAP_SET_BITS(struct amap_eth_hdr_wrb, tcpcs, hdr, 1);
+		else if (is_udp_pkt(skb))
+			AMAP_SET_BITS(struct amap_eth_hdr_wrb, udpcs, hdr, 1);
+	}
+
+	if (vlan && vlan_tx_tag_present(skb)) {
+		AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan, hdr, 1);
+		AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan_tag,
+			hdr, vlan_tx_tag_get(skb));
+	}
+
+	AMAP_SET_BITS(struct amap_eth_hdr_wrb, event, hdr, 1);
+	AMAP_SET_BITS(struct amap_eth_hdr_wrb, complete, hdr, 1);
+	AMAP_SET_BITS(struct amap_eth_hdr_wrb, num_wrb, hdr, wrb_cnt);
+	AMAP_SET_BITS(struct amap_eth_hdr_wrb, len, hdr, len);
+}
+
+
+static int make_tx_wrbs(struct be_adapter *adapter,
+		struct sk_buff *skb, u32 wrb_cnt, bool dummy_wrb)
+{
+	u64 busaddr;
+	u32 i, copied = 0;
+	struct pci_dev *pdev = adapter->pdev;
+	struct sk_buff *first_skb = skb;
+	struct be_queue_info *txq = &adapter->tx_obj.q;
+	struct be_eth_wrb *wrb;
+	struct be_eth_hdr_wrb *hdr;
+
+	atomic_add(wrb_cnt, &txq->used);
+	hdr = queue_head_node(txq);
+	queue_head_inc(txq);
+
+	while (skb) {
+		if (skb->len > skb->data_len) {
+			int len = skb->len - skb->data_len;
+			busaddr = pci_map_single(pdev, skb->data, len,
+					PCI_DMA_TODEVICE);
+			wrb = queue_head_node(txq);
+			wrb_fill(wrb, busaddr, len);
+			be_dws_cpu_to_le(wrb, sizeof(*wrb));
+			queue_head_inc(txq);
+			copied += len;
+		}
+
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+			struct skb_frag_struct *frag =
+				&skb_shinfo(skb)->frags[i];
+			busaddr = pci_map_page(pdev, frag->page,
+					frag->page_offset,
+					frag->size, PCI_DMA_TODEVICE);
+			wrb = queue_head_node(txq);
+			wrb_fill(wrb, busaddr, frag->size);
+			be_dws_cpu_to_le(wrb, sizeof(*wrb));
+			queue_head_inc(txq);
+			copied += frag->size;
+		}
+		skb = skb_shinfo(skb)->frag_list;
+	}
+
+	if (dummy_wrb) {
+		wrb = queue_head_node(txq);
+		wrb_fill(wrb, 0, 0);
+		be_dws_cpu_to_le(wrb, sizeof(*wrb));
+		queue_head_inc(txq);
+	}
+
+	wrb_fill_hdr(hdr, first_skb, adapter->vlan_grp ? true : false,
+		wrb_cnt, copied);
+	be_dws_cpu_to_le(hdr, sizeof(*hdr));
+
+	return copied;
+}
+
+static int be_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_tx_obj *tx_obj = &adapter->tx_obj;
+	struct be_queue_info *txq = &tx_obj->q;
+	u32 wrb_cnt = 0, copied = 0;
+	u32 start = txq->head;
+	bool dummy_wrb, stopped = false;
+
+	wrb_cnt = wrb_cnt_for_skb(skb, &dummy_wrb);
+
+	copied = make_tx_wrbs(adapter, skb, wrb_cnt, dummy_wrb);
+
+	/* record the sent skb in the sent_skb table */
+	BUG_ON(tx_obj->sent_skb_list[start]);
+	tx_obj->sent_skb_list[start] = skb;
+
+	/* Ensure that txq has space for the next skb; Else stop the queue
+	 * *BEFORE* ringing the tx doorbell, so that we serialze the
+	 * tx compls of the current transmit which'll wake up the queue
+	 */
+	if ((BE_MAX_TX_FRAG_COUNT + atomic_read(&txq->used)) >= txq->len) {
+		netif_stop_queue(netdev);
+		stopped = true;
+	}
+
+	be_txq_notify(&adapter->ctrl, txq->id, wrb_cnt);
+
+	netdev->trans_start = jiffies;
+
+	be_tx_stats_update(adapter, wrb_cnt, copied, stopped);
+	return NETDEV_TX_OK;
+}
+
+static int be_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	if (new_mtu < BE_MIN_MTU ||
+			new_mtu > BE_MAX_JUMBO_FRAME_SIZE) {
+		dev_info(&adapter->pdev->dev,
+			"MTU must be between %d and %d bytes\n",
+			BE_MIN_MTU, BE_MAX_JUMBO_FRAME_SIZE);
+		return -EINVAL;
+	}
+	dev_info(&adapter->pdev->dev, "MTU changed from %d to %d bytes\n",
+			netdev->mtu, new_mtu);
+	netdev->mtu = new_mtu;
+	return 0;
+}
+
+/*
+ * if there are BE_NUM_VLANS_SUPPORTED or lesser number of VLANS configured,
+ * program them in BE.  If more than BE_NUM_VLANS_SUPPORTED are configured,
+ * set the BE in promiscuous VLAN mode.
+ */
+static void be_vid_config(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	u16 vtag[BE_NUM_VLANS_SUPPORTED];
+	u16 ntags = 0, i;
+
+	if (adapter->num_vlans <= BE_NUM_VLANS_SUPPORTED)  {
+		/* Construct VLAN Table to give to HW */
+		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+			if (adapter->vlan_tag[i]) {
+				vtag[ntags] = cpu_to_le16(i);
+				ntags++;
+			}
+		}
+		be_cmd_vlan_config(&adapter->ctrl, adapter->if_handle,
+			vtag, ntags, 1, 0);
+	} else {
+		be_cmd_vlan_config(&adapter->ctrl, adapter->if_handle,
+			NULL, 0, 1, 1);
+	}
+}
+
+static void be_vlan_register(struct net_device *netdev, struct vlan_group *grp)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_eq_obj *rx_eq = &adapter->rx_eq;
+	struct be_eq_obj *tx_eq = &adapter->tx_eq;
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+
+	be_eq_notify(ctrl, rx_eq->q.id, false, false, 0);
+	be_eq_notify(ctrl, tx_eq->q.id, false, false, 0);
+	adapter->vlan_grp = grp;
+	be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
+	be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+}
+
+static void be_vlan_add_vid(struct net_device *netdev, u16 vid)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	adapter->num_vlans++;
+	adapter->vlan_tag[vid] = 1;
+
+	be_vid_config(netdev);
+}
+
+static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	adapter->num_vlans--;
+	adapter->vlan_tag[vid] = 0;
+
+	vlan_group_set_device(adapter->vlan_grp, vid, NULL);
+	be_vid_config(netdev);
+}
+
+static void be_set_multicast_filter(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct dev_mc_list *mc_ptr;
+	u8 mac_addr[32][ETH_ALEN];
+	int i = 0;
+
+	if (netdev->flags & IFF_ALLMULTI) {
+		/* set BE in Multicast promiscuous */
+		be_cmd_mcast_mac_set(&adapter->ctrl,
+					adapter->if_handle, NULL, 0, true);
+		return;
+	}
+
+	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+		memcpy(&mac_addr[i][0], mc_ptr->dmi_addr, ETH_ALEN);
+		if (++i >= 32) {
+			be_cmd_mcast_mac_set(&adapter->ctrl,
+				adapter->if_handle, &mac_addr[0][0], i, false);
+			i = 0;
+		}
+
+	}
+
+	if (i) {
+		/* reset the promiscuous mode also. */
+		be_cmd_mcast_mac_set(&adapter->ctrl,
+			adapter->if_handle, &mac_addr[0][0], i, false);
+	}
+}
+
+static void be_set_multicast_list(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	if (netdev->flags & IFF_PROMISC) {
+		be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 1);
+	} else {
+		be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 0);
+		be_set_multicast_filter(netdev);
+	}
+}
+
+static void be_rx_rate_update(struct be_adapter *adapter, u32 pktsize,
+			u16 numfrags)
+{
+	struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+	u32 rate;
+
+	stats->be_rx_compl++;
+	stats->be_rx_frags += numfrags;
+	stats->be_rx_bytes += pktsize;
+
+	/* Update the rate once in two seconds */
+	if ((jiffies - stats->be_rx_jiffies) < 2 * HZ)
+		return;
+
+	rate = (stats->be_rx_bytes - stats->be_rx_bytes_prev) /
+		((u32) (jiffies - stats->be_rx_jiffies) / HZ);
+	rate = (rate / 1000000);	/* MB/Sec */
+	stats->be_rx_rate = (rate * 8); 	/* Mega Bits/Sec */
+	stats->be_rx_jiffies = jiffies;
+	stats->be_rx_bytes_prev = stats->be_rx_bytes;
+}
+
+static struct be_rx_page_info *
+get_rx_page_info(struct be_adapter *adapter, u16 frag_idx)
+{
+	struct be_rx_page_info *rx_page_info;
+	struct be_queue_info *rxq = &adapter->rx_obj.q;
+
+	rx_page_info = &adapter->rx_obj.page_info_tbl[frag_idx];
+	BUG_ON(!rx_page_info->page);
+
+	if (rx_page_info->last_page_user)
+		pci_unmap_page(adapter->pdev, pci_unmap_addr(rx_page_info, bus),
+			adapter->big_page_size, PCI_DMA_FROMDEVICE);
+
+	atomic_dec(&rxq->used);
+	return rx_page_info;
+}
+
+/* Throwaway the data in the Rx completion */
+static void be_rx_compl_discard(struct be_adapter *adapter,
+			struct be_eth_rx_compl *rxcp)
+{
+	struct be_queue_info *rxq = &adapter->rx_obj.q;
+	struct be_rx_page_info *page_info;
+	u16 rxq_idx, i, num_rcvd;
+
+	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+
+	for (i = 0; i < num_rcvd; i++) {
+		page_info = get_rx_page_info(adapter, rxq_idx);
+		put_page(page_info->page);
+		memset(page_info, 0, sizeof(*page_info));
+		index_inc(&rxq_idx, rxq->len);
+	}
+}
+
+/*
+ * skb_fill_rx_data forms a complete skb for an ether frame
+ * indicated by rxcp.
+ */
+static void skb_fill_rx_data(struct be_adapter *adapter,
+			struct sk_buff *skb, struct be_eth_rx_compl *rxcp)
+{
+	struct be_queue_info *rxq = &adapter->rx_obj.q;
+	struct be_rx_page_info *page_info;
+	u16 rxq_idx, i, num_rcvd;
+	u32 pktsize, hdr_len, curr_frag_len;
+	u8 *start;
+
+	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+	pktsize = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
+	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+
+	page_info = get_rx_page_info(adapter, rxq_idx);
+
+	start = page_address(page_info->page) + page_info->page_offset;
+	prefetch(start);
+
+	/* Copy data in the first descriptor of this completion */
+	curr_frag_len = min(pktsize, rx_frag_size);
+
+	/* Copy the header portion into skb_data */
+	hdr_len = min((u32)BE_HDR_LEN, curr_frag_len);
+	memcpy(skb->data, start, hdr_len);
+	skb->len = curr_frag_len;
+	if (curr_frag_len <= BE_HDR_LEN) { /* tiny packet */
+		/* Complete packet has now been moved to data */
+		put_page(page_info->page);
+		skb->data_len = 0;
+		skb->tail += curr_frag_len;
+	} else {
+		skb_shinfo(skb)->nr_frags = 1;
+		skb_shinfo(skb)->frags[0].page = page_info->page;
+		skb_shinfo(skb)->frags[0].page_offset =
+					page_info->page_offset + hdr_len;
+		skb_shinfo(skb)->frags[0].size = curr_frag_len - hdr_len;
+		skb->data_len = curr_frag_len - hdr_len;
+		skb->tail += hdr_len;
+	}
+	memset(page_info, 0, sizeof(*page_info));
+
+	if (pktsize <= rx_frag_size) {
+		BUG_ON(num_rcvd != 1);
+		return;
+	}
+
+	/* More frags present for this completion */
+	pktsize -= curr_frag_len; /* account for above copied frag */
+	for (i = 1; i < num_rcvd; i++) {
+		index_inc(&rxq_idx, rxq->len);
+		page_info = get_rx_page_info(adapter, rxq_idx);
+
+		curr_frag_len = min(pktsize, rx_frag_size);
+
+		skb_shinfo(skb)->frags[i].page = page_info->page;
+		skb_shinfo(skb)->frags[i].page_offset = page_info->page_offset;
+		skb_shinfo(skb)->frags[i].size = curr_frag_len;
+		skb->len += curr_frag_len;
+		skb->data_len += curr_frag_len;
+		skb_shinfo(skb)->nr_frags++;
+		pktsize -= curr_frag_len;
+
+		memset(page_info, 0, sizeof(*page_info));
+	}
+
+	be_rx_rate_update(adapter, pktsize, num_rcvd);
+	return;
+}
+
+/* Process the RX completion indicated by rxcp when LRO is disabled */
+static void be_rx_compl_process(struct be_adapter *adapter,
+			struct be_eth_rx_compl *rxcp)
+{
+	struct sk_buff *skb;
+	u32 vtp, vid;
+	int l4_cksm;
+
+	l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
+	vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+
+	skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
+	if (!skb) {
+		if (net_ratelimit())
+			dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
+		be_rx_compl_discard(adapter, rxcp);
+		return;
+	}
+
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	skb_fill_rx_data(adapter, skb, rxcp);
+
+	if (l4_cksm && adapter->rx_csum)
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+	else
+		skb->ip_summed = CHECKSUM_NONE;
+
+	skb->truesize = skb->len + sizeof(struct sk_buff);
+	skb->protocol = eth_type_trans(skb, adapter->netdev);
+	skb->dev = adapter->netdev;
+
+	if (vtp) {
+		if (!adapter->vlan_grp || adapter->num_vlans == 0) {
+			kfree_skb(skb);
+			return;
+		}
+		vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
+		vid = be16_to_cpu(vid);
+		vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, vid);
+	} else {
+		netif_receive_skb(skb);
+	}
+
+	adapter->netdev->last_rx = jiffies;
+
+	return;
+}
+
+/* Process the RX completion indicated by rxcp when LRO is enabled */
+static void be_rx_compl_process_lro(struct be_adapter *adapter,
+			struct be_eth_rx_compl *rxcp)
+{
+	struct be_rx_page_info *page_info;
+	struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
+	struct be_queue_info *rxq = &adapter->rx_obj.q;
+	u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
+	u16 i, rxq_idx = 0, vid;
+
+	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+	pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
+	vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+
+	remaining = pkt_size;
+	for (i = 0; i < num_rcvd; i++) {
+		page_info = get_rx_page_info(adapter, rxq_idx);
+
+		curr_frag_len = min(remaining, rx_frag_size);
+
+		rx_frags[i].page = page_info->page;
+		rx_frags[i].page_offset = page_info->page_offset;
+		rx_frags[i].size = curr_frag_len;
+		remaining -= curr_frag_len;
+
+		index_inc(&rxq_idx, rxq->len);
+
+		memset(page_info, 0, sizeof(*page_info));
+	}
+
+	if (likely(!vlanf)) {
+		lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size,
+				pkt_size, NULL, 0);
+	} else {
+		vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
+		vid = be16_to_cpu(vid);
+
+		if (!adapter->vlan_grp || adapter->num_vlans == 0)
+			return;
+
+		lro_vlan_hwaccel_receive_frags(&adapter->rx_obj.lro_mgr,
+			rx_frags, pkt_size, pkt_size, adapter->vlan_grp,
+			vid, NULL, 0);
+	}
+
+	be_rx_rate_update(adapter, pkt_size, num_rcvd);
+	return;
+}
+
+static struct be_eth_rx_compl *be_rx_compl_get(struct be_adapter *adapter)
+{
+	struct be_eth_rx_compl *rxcp = queue_tail_node(&adapter->rx_obj.cq);
+
+	if (rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] == 0)
+		return NULL;
+
+	be_dws_le_to_cpu(rxcp, sizeof(*rxcp));
+
+	rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] = 0;
+
+	queue_tail_inc(&adapter->rx_obj.cq);
+	return rxcp;
+}
+
+static inline struct page *be_alloc_pages(u32 size)
+{
+	gfp_t alloc_flags = GFP_ATOMIC;
+	u32 order = get_order(size);
+	if (order > 0)
+		alloc_flags |= __GFP_COMP;
+	return  alloc_pages(alloc_flags, order);
+}
+
+/*
+ * Allocate a page, split it to fragments of size rx_frag_size and post as
+ * receive buffers to BE
+ */
+static void be_post_rx_frags(struct be_adapter *adapter)
+{
+	struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl;
+	struct be_rx_page_info *page_info = NULL;
+	struct be_queue_info *rxq = &adapter->rx_obj.q;
+	struct page *pagep = NULL;
+	struct be_eth_rx_d *rxd;
+	u64 page_dmaaddr = 0, frag_dmaaddr;
+	u32 posted, page_offset = 0;
+
+
+	page_info = &page_info_tbl[rxq->head];
+	for (posted = 0; posted < MAX_RX_POST && !page_info->page; posted++) {
+		if (!pagep) {
+			pagep = be_alloc_pages(adapter->big_page_size);
+			if (unlikely(!pagep)) {
+				drvr_stats(adapter)->be_ethrx_post_fail++;
+				break;
+			}
+			page_dmaaddr = pci_map_page(adapter->pdev, pagep, 0,
+						adapter->big_page_size,
+						PCI_DMA_FROMDEVICE);
+			page_info->page_offset = 0;
+		} else {
+			get_page(pagep);
+			page_info->page_offset = page_offset + rx_frag_size;
+		}
+		page_offset = page_info->page_offset;
+		page_info->page = pagep;
+		pci_unmap_addr_set(page_info, bus, page_dmaaddr);
+		frag_dmaaddr = page_dmaaddr + page_info->page_offset;
+
+		rxd = queue_head_node(rxq);
+		rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
+		rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
+		queue_head_inc(rxq);
+
+		/* Any space left in the current big page for another frag? */
+		if ((page_offset + rx_frag_size + rx_frag_size) >
+					adapter->big_page_size) {
+			pagep = NULL;
+			page_info->last_page_user = true;
+		}
+		page_info = &page_info_tbl[rxq->head];
+	}
+	if (pagep)
+		page_info->last_page_user = true;
+
+	if (posted) {
+		atomic_add(posted, &rxq->used);
+		be_rxq_notify(&adapter->ctrl, rxq->id, posted);
+	} else if (atomic_read(&rxq->used) == 0) {
+		/* Let be_worker replenish when memory is available */
+		adapter->rx_post_starved = true;
+	}
+
+	return;
+}
+
+static struct be_eth_tx_compl *
+be_tx_compl_get(struct be_adapter *adapter)
+{
+	struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
+	struct be_eth_tx_compl *txcp = queue_tail_node(tx_cq);
+
+	if (txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0)
+		return NULL;
+
+	be_dws_le_to_cpu(txcp, sizeof(*txcp));
+
+	txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0;
+
+	queue_tail_inc(tx_cq);
+	return txcp;
+}
+
+static void be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
+{
+	struct be_queue_info *txq = &adapter->tx_obj.q;
+	struct be_eth_wrb *wrb;
+	struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
+	struct sk_buff *sent_skb;
+	u64 busaddr;
+	u16 cur_index, num_wrbs = 0;
+
+	cur_index = txq->tail;
+	sent_skb = sent_skbs[cur_index];
+	BUG_ON(!sent_skb);
+	sent_skbs[cur_index] = NULL;
+
+	do {
+		cur_index = txq->tail;
+		wrb = queue_tail_node(txq);
+		be_dws_le_to_cpu(wrb, sizeof(*wrb));
+		busaddr = ((u64)wrb->frag_pa_hi << 32) | (u64)wrb->frag_pa_lo;
+		if (busaddr != 0) {
+			pci_unmap_single(adapter->pdev, busaddr,
+				wrb->frag_len, PCI_DMA_TODEVICE);
+		}
+		num_wrbs++;
+		queue_tail_inc(txq);
+	} while (cur_index != last_index);
+
+	atomic_sub(num_wrbs, &txq->used);
+
+	kfree_skb(sent_skb);
+}
+
+static void be_rx_q_clean(struct be_adapter *adapter)
+{
+	struct be_rx_page_info *page_info;
+	struct be_queue_info *rxq = &adapter->rx_obj.q;
+	struct be_queue_info *rx_cq = &adapter->rx_obj.cq;
+	struct be_eth_rx_compl *rxcp;
+	u16 tail;
+
+	/* First cleanup pending rx completions */
+	while ((rxcp = be_rx_compl_get(adapter)) != NULL) {
+		be_rx_compl_discard(adapter, rxcp);
+		be_cq_notify(&adapter->ctrl, rx_cq->id, true, 1);
+	}
+
+	/* Then free posted rx buffer that were not used */
+	tail = (rxq->head + rxq->len - atomic_read(&rxq->used)) % rxq->len;
+	for (; tail != rxq->head; index_inc(&tail, rxq->len)) {
+		page_info = get_rx_page_info(adapter, tail);
+		put_page(page_info->page);
+		memset(page_info, 0, sizeof(*page_info));
+	}
+	BUG_ON(atomic_read(&rxq->used));
+}
+
+static void be_tx_q_clean(struct be_adapter *adapter)
+{
+	struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
+	struct sk_buff *sent_skb;
+	struct be_queue_info *txq = &adapter->tx_obj.q;
+	u16 last_index;
+	bool dummy_wrb;
+
+	while (atomic_read(&txq->used)) {
+		sent_skb = sent_skbs[txq->tail];
+		last_index = txq->tail;
+		index_adv(&last_index,
+			wrb_cnt_for_skb(sent_skb, &dummy_wrb) - 1, txq->len);
+		be_tx_compl_process(adapter, last_index);
+	}
+}
+
+static void be_tx_queues_destroy(struct be_adapter *adapter)
+{
+	struct be_queue_info *q;
+
+	q = &adapter->tx_obj.q;
+	if (q->created)
+		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_TXQ);
+	be_queue_free(adapter, q);
+
+	q = &adapter->tx_obj.cq;
+	if (q->created)
+		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
+	be_queue_free(adapter, q);
+
+	/* No more tx completions can be rcvd now; clean up if there are
+	 * any pending completions or pending tx requests */
+	be_tx_q_clean(adapter);
+
+	q = &adapter->tx_eq.q;
+	if (q->created)
+		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
+	be_queue_free(adapter, q);
+}
+
+static int be_tx_queues_create(struct be_adapter *adapter)
+{
+	struct be_queue_info *eq, *q, *cq;
+
+	adapter->tx_eq.max_eqd = 0;
+	adapter->tx_eq.min_eqd = 0;
+	adapter->tx_eq.cur_eqd = 96;
+	adapter->tx_eq.enable_aic = false;
+	/* Alloc Tx Event queue */
+	eq = &adapter->tx_eq.q;
+	if (be_queue_alloc(adapter, eq, EVNT_Q_LEN, sizeof(struct be_eq_entry)))
+		return -1;
+
+	/* Ask BE to create Tx Event queue */
+	if (be_cmd_eq_create(&adapter->ctrl, eq, adapter->tx_eq.cur_eqd))
+		goto tx_eq_free;
+	/* Alloc TX eth compl queue */
+	cq = &adapter->tx_obj.cq;
+	if (be_queue_alloc(adapter, cq, TX_CQ_LEN,
+			sizeof(struct be_eth_tx_compl)))
+		goto tx_eq_destroy;
+
+	/* Ask BE to create Tx eth compl queue */
+	if (be_cmd_cq_create(&adapter->ctrl, cq, eq, false, false, 3))
+		goto tx_cq_free;
+
+	/* Alloc TX eth queue */
+	q = &adapter->tx_obj.q;
+	if (be_queue_alloc(adapter, q, TX_Q_LEN, sizeof(struct be_eth_wrb)))
+		goto tx_cq_destroy;
+
+	/* Ask BE to create Tx eth queue */
+	if (be_cmd_txq_create(&adapter->ctrl, q, cq))
+		goto tx_q_free;
+	return 0;
+
+tx_q_free:
+	be_queue_free(adapter, q);
+tx_cq_destroy:
+	be_cmd_q_destroy(&adapter->ctrl, cq, QTYPE_CQ);
+tx_cq_free:
+	be_queue_free(adapter, cq);
+tx_eq_destroy:
+	be_cmd_q_destroy(&adapter->ctrl, eq, QTYPE_EQ);
+tx_eq_free:
+	be_queue_free(adapter, eq);
+	return -1;
+}
+
+static void be_rx_queues_destroy(struct be_adapter *adapter)
+{
+	struct be_queue_info *q;
+
+	q = &adapter->rx_obj.q;
+	if (q->created) {
+		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_RXQ);
+		be_rx_q_clean(adapter);
+	}
+	be_queue_free(adapter, q);
+
+	q = &adapter->rx_obj.cq;
+	if (q->created)
+		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
+	be_queue_free(adapter, q);
+
+	q = &adapter->rx_eq.q;
+	if (q->created)
+		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
+	be_queue_free(adapter, q);
+}
+
+static int be_rx_queues_create(struct be_adapter *adapter)
+{
+	struct be_queue_info *eq, *q, *cq;
+	int rc;
+
+	adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
+	adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
+	adapter->rx_eq.max_eqd = BE_MAX_EQD;
+	adapter->rx_eq.min_eqd = 0;
+	adapter->rx_eq.cur_eqd = 0;
+	adapter->rx_eq.enable_aic = true;
+
+	/* Alloc Rx Event queue */
+	eq = &adapter->rx_eq.q;
+	rc = be_queue_alloc(adapter, eq, EVNT_Q_LEN,
+				sizeof(struct be_eq_entry));
+	if (rc)
+		return rc;
+
+	/* Ask BE to create Rx Event queue */
+	rc = be_cmd_eq_create(&adapter->ctrl, eq, adapter->rx_eq.cur_eqd);
+	if (rc)
+		goto rx_eq_free;
+
+	/* Alloc RX eth compl queue */
+	cq = &adapter->rx_obj.cq;
+	rc = be_queue_alloc(adapter, cq, RX_CQ_LEN,
+			sizeof(struct be_eth_rx_compl));
+	if (rc)
+		goto rx_eq_destroy;
+
+	/* Ask BE to create Rx eth compl queue */
+	rc = be_cmd_cq_create(&adapter->ctrl, cq, eq, false, false, 3);
+	if (rc)
+		goto rx_cq_free;
+
+	/* Alloc RX eth queue */
+	q = &adapter->rx_obj.q;
+	rc = be_queue_alloc(adapter, q, RX_Q_LEN, sizeof(struct be_eth_rx_d));
+	if (rc)
+		goto rx_cq_destroy;
+
+	/* Ask BE to create Rx eth queue */
+	rc = be_cmd_rxq_create(&adapter->ctrl, q, cq->id, rx_frag_size,
+		BE_MAX_JUMBO_FRAME_SIZE, adapter->if_handle, false);
+	if (rc)
+		goto rx_q_free;
+
+	return 0;
+rx_q_free:
+	be_queue_free(adapter, q);
+rx_cq_destroy:
+	be_cmd_q_destroy(&adapter->ctrl, cq, QTYPE_CQ);
+rx_cq_free:
+	be_queue_free(adapter, cq);
+rx_eq_destroy:
+	be_cmd_q_destroy(&adapter->ctrl, eq, QTYPE_EQ);
+rx_eq_free:
+	be_queue_free(adapter, eq);
+	return rc;
+}
+static bool event_get(struct be_eq_obj *eq_obj, u16 *rid)
+{
+	struct be_eq_entry *entry = queue_tail_node(&eq_obj->q);
+	u32 evt = entry->evt;
+
+	if (!evt)
+		return false;
+
+	evt = le32_to_cpu(evt);
+	*rid = (evt >> EQ_ENTRY_RES_ID_SHIFT) & EQ_ENTRY_RES_ID_MASK;
+	entry->evt = 0;
+	queue_tail_inc(&eq_obj->q);
+	return true;
+}
+
+static int event_handle(struct be_ctrl_info *ctrl,
+			struct be_eq_obj *eq_obj)
+{
+	u16 rid = 0, num = 0;
+
+	while (event_get(eq_obj, &rid))
+		num++;
+
+	/* We can see an interrupt and no event */
+	be_eq_notify(ctrl, eq_obj->q.id, true, true, num);
+	if (num)
+		napi_schedule(&eq_obj->napi);
+
+	return num;
+}
+
+static irqreturn_t be_intx(int irq, void *dev)
+{
+	struct be_adapter *adapter = dev;
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	int rx, tx;
+
+	tx = event_handle(ctrl, &adapter->tx_eq);
+	rx = event_handle(ctrl, &adapter->rx_eq);
+
+	if (rx || tx)
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
+}
+
+static irqreturn_t be_msix_rx(int irq, void *dev)
+{
+	struct be_adapter *adapter = dev;
+
+	event_handle(&adapter->ctrl, &adapter->rx_eq);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t be_msix_tx(int irq, void *dev)
+{
+	struct be_adapter *adapter = dev;
+
+	event_handle(&adapter->ctrl, &adapter->tx_eq);
+
+	return IRQ_HANDLED;
+}
+
+static inline bool do_lro(struct be_adapter *adapter,
+			struct be_eth_rx_compl *rxcp)
+{
+	int err = AMAP_GET_BITS(struct amap_eth_rx_compl, err, rxcp);
+	int tcp_frame = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
+
+	if (err)
+		drvr_stats(adapter)->be_rxcp_err++;
+
+	return (!tcp_frame || err || (adapter->max_rx_coal <= 1)) ?
+		false : true;
+}
+
+int be_poll_rx(struct napi_struct *napi, int budget)
+{
+	struct be_eq_obj *rx_eq = container_of(napi, struct be_eq_obj, napi);
+	struct be_adapter *adapter =
+		container_of(rx_eq, struct be_adapter, rx_eq);
+	struct be_queue_info *rx_cq = &adapter->rx_obj.cq;
+	struct be_eth_rx_compl *rxcp;
+	u32 work_done;
+
+	for (work_done = 0; work_done < budget; work_done++) {
+		rxcp = be_rx_compl_get(adapter);
+		if (!rxcp)
+			break;
+
+		if (do_lro(adapter, rxcp))
+			be_rx_compl_process_lro(adapter, rxcp);
+		else
+			be_rx_compl_process(adapter, rxcp);
+	}
+
+	lro_flush_all(&adapter->rx_obj.lro_mgr);
+
+	/* Refill the queue */
+	if (atomic_read(&adapter->rx_obj.q.used) < RX_FRAGS_REFILL_WM)
+		be_post_rx_frags(adapter);
+
+	/* All consumed */
+	if (work_done < budget) {
+		napi_complete(napi);
+		be_cq_notify(&adapter->ctrl, rx_cq->id, true, work_done);
+	} else {
+		/* More to be consumed; continue with interrupts disabled */
+		be_cq_notify(&adapter->ctrl, rx_cq->id, false, work_done);
+	}
+	return work_done;
+}
+
+/* For TX we don't honour budget; consume everything */
+int be_poll_tx(struct napi_struct *napi, int budget)
+{
+	struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
+	struct be_adapter *adapter =
+		container_of(tx_eq, struct be_adapter, tx_eq);
+	struct be_tx_obj *tx_obj = &adapter->tx_obj;
+	struct be_queue_info *tx_cq = &tx_obj->cq;
+	struct be_queue_info *txq = &tx_obj->q;
+	struct be_eth_tx_compl *txcp;
+	u32 num_cmpl = 0;
+	u16 end_idx;
+
+	while ((txcp = be_tx_compl_get(adapter))) {
+		end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
+					wrb_index, txcp);
+		be_tx_compl_process(adapter, end_idx);
+		num_cmpl++;
+	}
+
+	/* As Tx wrbs have been freed up, wake up netdev queue if
+	 * it was stopped due to lack of tx wrbs.
+	 */
+	if (netif_queue_stopped(adapter->netdev) &&
+			atomic_read(&txq->used) < txq->len / 2) {
+		netif_wake_queue(adapter->netdev);
+	}
+
+	napi_complete(napi);
+
+	be_cq_notify(&adapter->ctrl, tx_cq->id, true, num_cmpl);
+
+	drvr_stats(adapter)->be_tx_events++;
+	drvr_stats(adapter)->be_tx_compl += num_cmpl;
+
+	return 1;
+}
+
+static void be_worker(struct work_struct *work)
+{
+	struct be_adapter *adapter =
+		container_of(work, struct be_adapter, work.work);
+	int status;
+
+	/* Check link */
+	be_link_status_update(adapter);
+
+	/* Get Stats */
+	status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
+	if (!status)
+		netdev_stats_update(adapter);
+
+	/* Set EQ delay */
+	be_rx_eqd_update(adapter);
+
+	if (adapter->rx_post_starved) {
+		adapter->rx_post_starved = false;
+		be_post_rx_frags(adapter);
+	}
+
+	schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
+}
+
+static void be_msix_enable(struct be_adapter *adapter)
+{
+	int i, status;
+
+	for (i = 0; i < BE_NUM_MSIX_VECTORS; i++)
+		adapter->msix_entries[i].entry = i;
+
+	status = pci_enable_msix(adapter->pdev, adapter->msix_entries,
+		BE_NUM_MSIX_VECTORS);
+	if (status == 0)
+		adapter->msix_enabled = true;
+	return;
+}
+
+static inline int be_msix_vec_get(struct be_adapter *adapter, u32 eq_id)
+{
+	return adapter->msix_entries[eq_id -
+			8 * adapter->ctrl.pci_func].vector;
+}
+
+static int be_msix_register(struct be_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct be_eq_obj *tx_eq = &adapter->tx_eq;
+	struct be_eq_obj *rx_eq = &adapter->rx_eq;
+	int status, vec;
+
+	sprintf(tx_eq->desc, "%s-tx", netdev->name);
+	vec = be_msix_vec_get(adapter, tx_eq->q.id);
+	status = request_irq(vec, be_msix_tx, 0, tx_eq->desc, adapter);
+	if (status)
+		goto err;
+
+	sprintf(rx_eq->desc, "%s-rx", netdev->name);
+	vec = be_msix_vec_get(adapter, rx_eq->q.id);
+	status = request_irq(vec, be_msix_rx, 0, rx_eq->desc, adapter);
+	if (status) { /* Free TX IRQ */
+		vec = be_msix_vec_get(adapter, tx_eq->q.id);
+		free_irq(vec, adapter);
+		goto err;
+	}
+	return 0;
+err:
+	dev_warn(&adapter->pdev->dev,
+		"MSIX Request IRQ failed - err %d\n", status);
+	pci_disable_msix(adapter->pdev);
+	adapter->msix_enabled = false;
+	return status;
+}
+
+static int be_irq_register(struct be_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int status;
+
+	if (adapter->msix_enabled) {
+		status = be_msix_register(adapter);
+		if (status == 0)
+			goto done;
+	}
+
+	/* INTx */
+	netdev->irq = adapter->pdev->irq;
+	status = request_irq(netdev->irq, be_intx, IRQF_SHARED, netdev->name,
+			adapter);
+	if (status) {
+		dev_err(&adapter->pdev->dev,
+			"INTx request IRQ failed - err %d\n", status);
+		return status;
+	}
+done:
+	adapter->isr_registered = true;
+	return 0;
+}
+
+static void be_irq_unregister(struct be_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int vec;
+
+	if (!adapter->isr_registered)
+		return;
+
+	/* INTx */
+	if (!adapter->msix_enabled) {
+		free_irq(netdev->irq, adapter);
+		goto done;
+	}
+
+	/* MSIx */
+	vec = be_msix_vec_get(adapter, adapter->tx_eq.q.id);
+	free_irq(vec, adapter);
+	vec = be_msix_vec_get(adapter, adapter->rx_eq.q.id);
+	free_irq(vec, adapter);
+done:
+	adapter->isr_registered = false;
+	return;
+}
+
+static int be_open(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	struct be_eq_obj *rx_eq = &adapter->rx_eq;
+	struct be_eq_obj *tx_eq = &adapter->tx_eq;
+	u32 if_flags;
+	int status;
+
+	if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS |
+		BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED |
+		BE_IF_FLAGS_PASS_L3L4_ERRORS;
+	status = be_cmd_if_create(ctrl, if_flags, netdev->dev_addr,
+			false/* pmac_invalid */, &adapter->if_handle,
+			&adapter->pmac_id);
+	if (status != 0)
+		goto do_none;
+
+	be_vid_config(netdev);
+
+	status = be_cmd_set_flow_control(ctrl, true, true);
+	if (status != 0)
+		goto if_destroy;
+
+	status = be_tx_queues_create(adapter);
+	if (status != 0)
+		goto if_destroy;
+
+	status = be_rx_queues_create(adapter);
+	if (status != 0)
+		goto tx_qs_destroy;
+
+	/* First time posting */
+	be_post_rx_frags(adapter);
+
+	napi_enable(&rx_eq->napi);
+	napi_enable(&tx_eq->napi);
+
+	be_irq_register(adapter);
+
+	be_intr_set(ctrl, true);
+
+	/* The evt queues are created in the unarmed state; arm them */
+	be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
+	be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+
+	/* The compl queues are created in the unarmed state; arm them */
+	be_cq_notify(ctrl, adapter->rx_obj.cq.id, true, 0);
+	be_cq_notify(ctrl, adapter->tx_obj.cq.id, true, 0);
+
+	be_link_status_update(adapter);
+
+	schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
+	return 0;
+
+tx_qs_destroy:
+	be_tx_queues_destroy(adapter);
+if_destroy:
+	be_cmd_if_destroy(ctrl, adapter->if_handle);
+do_none:
+	return status;
+}
+
+static int be_close(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	struct be_eq_obj *rx_eq = &adapter->rx_eq;
+	struct be_eq_obj *tx_eq = &adapter->tx_eq;
+	int vec;
+
+	cancel_delayed_work(&adapter->work);
+
+	netif_stop_queue(netdev);
+	netif_carrier_off(netdev);
+	adapter->link.speed = PHY_LINK_SPEED_ZERO;
+
+	be_intr_set(ctrl, false);
+
+	if (adapter->msix_enabled) {
+		vec = be_msix_vec_get(adapter, tx_eq->q.id);
+		synchronize_irq(vec);
+		vec = be_msix_vec_get(adapter, rx_eq->q.id);
+		synchronize_irq(vec);
+	} else {
+		synchronize_irq(netdev->irq);
+	}
+	be_irq_unregister(adapter);
+
+	napi_disable(&rx_eq->napi);
+	napi_disable(&tx_eq->napi);
+
+	be_rx_queues_destroy(adapter);
+	be_tx_queues_destroy(adapter);
+
+	be_cmd_if_destroy(ctrl, adapter->if_handle);
+	return 0;
+}
+
+static int be_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
+				void **ip_hdr, void **tcpudp_hdr,
+				u64 *hdr_flags, void *priv)
+{
+	struct ethhdr *eh;
+	struct vlan_ethhdr *veh;
+	struct iphdr *iph;
+	u8 *va = page_address(frag->page) + frag->page_offset;
+	unsigned long ll_hlen;
+
+	prefetch(va);
+	eh = (struct ethhdr *)va;
+	*mac_hdr = eh;
+	ll_hlen = ETH_HLEN;
+	if (eh->h_proto != htons(ETH_P_IP)) {
+		if (eh->h_proto == htons(ETH_P_8021Q)) {
+			veh = (struct vlan_ethhdr *)va;
+			if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
+				return -1;
+
+			ll_hlen += VLAN_HLEN;
+		} else {
+			return -1;
+		}
+	}
+	*hdr_flags = LRO_IPV4;
+	iph = (struct iphdr *)(va + ll_hlen);
+	*ip_hdr = iph;
+	if (iph->protocol != IPPROTO_TCP)
+		return -1;
+	*hdr_flags |= LRO_TCP;
+	*tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
+
+	return 0;
+}
+
+static void be_lro_init(struct be_adapter *adapter, struct net_device *netdev)
+{
+	struct net_lro_mgr *lro_mgr;
+
+	lro_mgr = &adapter->rx_obj.lro_mgr;
+	lro_mgr->dev = netdev;
+	lro_mgr->features = LRO_F_NAPI;
+	lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
+	lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
+	lro_mgr->max_desc = BE_MAX_LRO_DESCRIPTORS;
+	lro_mgr->lro_arr = adapter->rx_obj.lro_desc;
+	lro_mgr->get_frag_header = be_get_frag_header;
+	lro_mgr->max_aggr = BE_MAX_FRAGS_PER_FRAME;
+}
+
+static struct net_device_ops be_netdev_ops = {
+	.ndo_open		= be_open,
+	.ndo_stop		= be_close,
+	.ndo_start_xmit		= be_xmit,
+	.ndo_get_stats		= be_get_stats,
+	.ndo_set_rx_mode	= be_set_multicast_list,
+	.ndo_set_mac_address	= be_mac_addr_set,
+	.ndo_change_mtu		= be_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_vlan_rx_register	= be_vlan_register,
+	.ndo_vlan_rx_add_vid	= be_vlan_add_vid,
+	.ndo_vlan_rx_kill_vid	= be_vlan_rem_vid,
+};
+
+static void be_netdev_init(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
+		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM |
+		NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+
+	netdev->flags |= IFF_MULTICAST;
+
+	BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
+
+	SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
+
+	be_lro_init(adapter, netdev);
+
+	netif_napi_add(netdev, &adapter->rx_eq.napi, be_poll_rx,
+		BE_NAPI_WEIGHT);
+	netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx,
+		BE_NAPI_WEIGHT);
+
+	netif_carrier_off(netdev);
+	netif_stop_queue(netdev);
+}
+
+static void be_unmap_pci_bars(struct be_adapter *adapter)
+{
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	if (ctrl->csr)
+		iounmap(ctrl->csr);
+	if (ctrl->db)
+		iounmap(ctrl->db);
+	if (ctrl->pcicfg)
+		iounmap(ctrl->pcicfg);
+}
+
+static int be_map_pci_bars(struct be_adapter *adapter)
+{
+	u8 __iomem *addr;
+
+	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2),
+			pci_resource_len(adapter->pdev, 2));
+	if (addr == NULL)
+		return -ENOMEM;
+	adapter->ctrl.csr = addr;
+
+	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 4),
+			128 * 1024);
+	if (addr == NULL)
+		goto pci_map_err;
+	adapter->ctrl.db = addr;
+
+	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1),
+			pci_resource_len(adapter->pdev, 1));
+	if (addr == NULL)
+		goto pci_map_err;
+	adapter->ctrl.pcicfg = addr;
+
+	return 0;
+pci_map_err:
+	be_unmap_pci_bars(adapter);
+	return -ENOMEM;
+}
+
+
+static void be_ctrl_cleanup(struct be_adapter *adapter)
+{
+	struct be_dma_mem *mem = &adapter->ctrl.mbox_mem_alloced;
+
+	be_unmap_pci_bars(adapter);
+
+	if (mem->va)
+		pci_free_consistent(adapter->pdev, mem->size,
+			mem->va, mem->dma);
+}
+
+/* Initialize the mbox required to send cmds to BE */
+static int be_ctrl_init(struct be_adapter *adapter)
+{
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	struct be_dma_mem *mbox_mem_alloc = &ctrl->mbox_mem_alloced;
+	struct be_dma_mem *mbox_mem_align = &ctrl->mbox_mem;
+	int status;
+	u32 val;
+
+	status = be_map_pci_bars(adapter);
+	if (status)
+		return status;
+
+	mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
+	mbox_mem_alloc->va = pci_alloc_consistent(adapter->pdev,
+				mbox_mem_alloc->size, &mbox_mem_alloc->dma);
+	if (!mbox_mem_alloc->va) {
+		be_unmap_pci_bars(adapter);
+		return -1;
+	}
+	mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
+	mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
+	mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
+	memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
+	spin_lock_init(&ctrl->cmd_lock);
+
+	val = ioread32(ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
+	ctrl->pci_func = (val >> MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT) &
+					MEMBAR_CTRL_INT_CTRL_PFUNC_MASK;
+	return 0;
+}
+
+static void be_stats_cleanup(struct be_adapter *adapter)
+{
+	struct be_stats_obj *stats = &adapter->stats;
+	struct be_dma_mem *cmd = &stats->cmd;
+
+	if (cmd->va)
+		pci_free_consistent(adapter->pdev, cmd->size,
+			cmd->va, cmd->dma);
+}
+
+static int be_stats_init(struct be_adapter *adapter)
+{
+	struct be_stats_obj *stats = &adapter->stats;
+	struct be_dma_mem *cmd = &stats->cmd;
+
+	cmd->size = sizeof(struct be_cmd_req_get_stats);
+	cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma);
+	if (cmd->va == NULL)
+		return -1;
+	return 0;
+}
+
+static void __devexit be_remove(struct pci_dev *pdev)
+{
+	struct be_adapter *adapter = pci_get_drvdata(pdev);
+	if (!adapter)
+		return;
+
+	unregister_netdev(adapter->netdev);
+
+	be_stats_cleanup(adapter);
+
+	be_ctrl_cleanup(adapter);
+
+	if (adapter->msix_enabled) {
+		pci_disable_msix(adapter->pdev);
+		adapter->msix_enabled = false;
+	}
+
+	pci_set_drvdata(pdev, NULL);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+
+	free_netdev(adapter->netdev);
+}
+
+static int be_hw_up(struct be_adapter *adapter)
+{
+	struct be_ctrl_info *ctrl = &adapter->ctrl;
+	int status;
+
+	status = be_cmd_POST(ctrl);
+	if (status)
+		return status;
+
+	status = be_cmd_get_fw_ver(ctrl, adapter->fw_ver);
+	if (status)
+		return status;
+
+	status = be_cmd_query_fw_cfg(ctrl, &adapter->port_num);
+	return status;
+}
+
+static int __devinit be_probe(struct pci_dev *pdev,
+			const struct pci_device_id *pdev_id)
+{
+	int status = 0;
+	struct be_adapter *adapter;
+	struct net_device *netdev;
+	struct be_ctrl_info *ctrl;
+	u8 mac[ETH_ALEN];
+
+	status = pci_enable_device(pdev);
+	if (status)
+		goto do_none;
+
+	status = pci_request_regions(pdev, DRV_NAME);
+	if (status)
+		goto disable_dev;
+	pci_set_master(pdev);
+
+	netdev = alloc_etherdev(sizeof(struct be_adapter));
+	if (netdev == NULL) {
+		status = -ENOMEM;
+		goto rel_reg;
+	}
+	adapter = netdev_priv(netdev);
+	adapter->pdev = pdev;
+	pci_set_drvdata(pdev, adapter);
+	adapter->netdev = netdev;
+
+	be_msix_enable(adapter);
+
+	status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+	if (!status) {
+		netdev->features |= NETIF_F_HIGHDMA;
+	} else {
+		status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (status) {
+			dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
+			goto free_netdev;
+		}
+	}
+
+	ctrl = &adapter->ctrl;
+	status = be_ctrl_init(adapter);
+	if (status)
+		goto free_netdev;
+
+	status = be_stats_init(adapter);
+	if (status)
+		goto ctrl_clean;
+
+	status = be_hw_up(adapter);
+	if (status)
+		goto stats_clean;
+
+	status = be_cmd_mac_addr_query(ctrl, mac, MAC_ADDRESS_TYPE_NETWORK,
+			true /* permanent */, 0);
+	if (status)
+		goto stats_clean;
+	memcpy(netdev->dev_addr, mac, ETH_ALEN);
+
+	INIT_DELAYED_WORK(&adapter->work, be_worker);
+	be_netdev_init(netdev);
+	SET_NETDEV_DEV(netdev, &adapter->pdev->dev);
+
+	status = register_netdev(netdev);
+	if (status != 0)
+		goto stats_clean;
+
+	dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num);
+	return 0;
+
+stats_clean:
+	be_stats_cleanup(adapter);
+ctrl_clean:
+	be_ctrl_cleanup(adapter);
+free_netdev:
+	free_netdev(adapter->netdev);
+rel_reg:
+	pci_release_regions(pdev);
+disable_dev:
+	pci_disable_device(pdev);
+do_none:
+	dev_warn(&pdev->dev, BE_NAME " initialization failed\n");
+	return status;
+}
+
+static int be_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct be_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev =  adapter->netdev;
+
+	netif_device_detach(netdev);
+	if (netif_running(netdev)) {
+		rtnl_lock();
+		be_close(netdev);
+		rtnl_unlock();
+	}
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+
+static int be_resume(struct pci_dev *pdev)
+{
+	int status = 0;
+	struct be_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev =  adapter->netdev;
+
+	netif_device_detach(netdev);
+
+	status = pci_enable_device(pdev);
+	if (status)
+		return status;
+
+	pci_set_power_state(pdev, 0);
+	pci_restore_state(pdev);
+
+	if (netif_running(netdev)) {
+		rtnl_lock();
+		be_open(netdev);
+		rtnl_unlock();
+	}
+	netif_device_attach(netdev);
+	return 0;
+}
+
+static struct pci_driver be_driver = {
+	.name = DRV_NAME,
+	.id_table = be_dev_ids,
+	.probe = be_probe,
+	.remove = be_remove,
+	.suspend = be_suspend,
+	.resume = be_resume
+};
+
+static int __init be_init_module(void)
+{
+	if (rx_frag_size != 8192 && rx_frag_size != 4096
+		&& rx_frag_size != 2048) {
+		printk(KERN_WARNING DRV_NAME
+			" : Module param rx_frag_size must be 2048/4096/8192."
+			" Using 2048\n");
+		rx_frag_size = 2048;
+	}
+	/* Ensure rx_frag_size is aligned to chache line */
+	if (SKB_DATA_ALIGN(rx_frag_size) != rx_frag_size) {
+		printk(KERN_WARNING DRV_NAME
+			" : Bad module param rx_frag_size. Using 2048\n");
+		rx_frag_size = 2048;
+	}
+
+	return pci_register_driver(&be_driver);
+}
+module_init(be_init_module);
+
+static void __exit be_exit_module(void)
+{
+	pci_unregister_driver(&be_driver);
+}
+module_exit(be_exit_module);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 6500b7c4739..6b6530ffdf1 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -57,8 +57,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.9.2"
-#define DRV_MODULE_RELDATE	"Feb 11, 2009"
+#define DRV_MODULE_VERSION	"1.9.3"
+#define DRV_MODULE_RELDATE	"March 17, 2009"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -5843,9 +5843,6 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
 	for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
 		msix_ent[i].entry = i;
 		msix_ent[i].vector = 0;
-
-		snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i);
-		bp->irq_tbl[i].handler = bnx2_msi_1shot;
 	}
 
 	rc = pci_enable_msix(bp->pdev, msix_ent, BNX2_MAX_MSIX_VEC);
@@ -5854,8 +5851,11 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
 
 	bp->irq_nvecs = msix_vecs;
 	bp->flags |= BNX2_FLAG_USING_MSIX | BNX2_FLAG_ONE_SHOT_MSI;
-	for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
+	for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
 		bp->irq_tbl[i].vector = msix_ent[i].vector;
+		snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i);
+		bp->irq_tbl[i].handler = bnx2_msi_1shot;
+	}
 }
 
 static void
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 15a5cf0f676..3cf2b92eef3 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -152,7 +152,7 @@ struct sw_rx_page {
 #define PAGES_PER_SGE			(1 << PAGES_PER_SGE_SHIFT)
 #define SGE_PAGE_SIZE			PAGE_SIZE
 #define SGE_PAGE_SHIFT			PAGE_SHIFT
-#define SGE_PAGE_ALIGN(addr)		PAGE_ALIGN(addr)
+#define SGE_PAGE_ALIGN(addr)		PAGE_ALIGN((typeof(PAGE_SIZE))addr)
 
 #define BCM_RX_ETH_PAYLOAD_ALIGN	64
 
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index a6c0b3abba2..3b0c2499ef1 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -150,7 +150,6 @@ static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
 
 static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
 {
-#ifdef USE_DMAE
 	int offset = 0;
 
 	if (bp->dmae_ready) {
@@ -164,9 +163,6 @@ static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
 				 addr + offset, len);
 	} else
 		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-#else
-	bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-#endif
 }
 
 static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index d3e7775a9cc..2e346a5e98c 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -57,7 +57,7 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION	"1.45.26"
+#define DRV_MODULE_VERSION	"1.45.27"
 #define DRV_MODULE_RELDATE	"2009/01/26"
 #define BNX2X_BC_VER		0x040200
 
@@ -4035,10 +4035,10 @@ static void bnx2x_zero_sb(struct bnx2x *bp, int sb_id)
 {
 	int port = BP_PORT(bp);
 
-	bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
+	bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
 			USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
 			sizeof(struct ustorm_status_block)/4);
-	bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
+	bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
 			CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
 			sizeof(struct cstorm_status_block)/4);
 }
@@ -4092,18 +4092,18 @@ static void bnx2x_zero_def_sb(struct bnx2x *bp)
 {
 	int func = BP_FUNC(bp);
 
-	bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
+	bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR +
+			TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+			sizeof(struct tstorm_def_status_block)/4);
+	bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
 			USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
 			sizeof(struct ustorm_def_status_block)/4);
-	bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
+	bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
 			CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
 			sizeof(struct cstorm_def_status_block)/4);
-	bnx2x_init_fill(bp, BAR_XSTRORM_INTMEM +
+	bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR +
 			XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
 			sizeof(struct xstorm_def_status_block)/4);
-	bnx2x_init_fill(bp, BAR_TSTRORM_INTMEM +
-			TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
-			sizeof(struct tstorm_def_status_block)/4);
 }
 
 static void bnx2x_init_def_sb(struct bnx2x *bp,
@@ -4518,7 +4518,8 @@ static void bnx2x_init_context(struct bnx2x *bp)
 				(USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA |
 				 USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_SGE_RING);
 			context->ustorm_st_context.common.sge_buff_size =
-					(u16)(BCM_PAGE_SIZE*PAGES_PER_SGE);
+				(u16)min((u32)SGE_PAGE_SIZE*PAGES_PER_SGE,
+					 (u32)0xffff);
 			context->ustorm_st_context.common.sge_page_base_hi =
 						U64_HI(fp->rx_sge_mapping);
 			context->ustorm_st_context.common.sge_page_base_lo =
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 9fb388388fb..3d76686dcec 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3537,11 +3537,26 @@ static int bond_slave_netdev_event(unsigned long event, struct net_device *slave
 		}
 		break;
 	case NETDEV_CHANGE:
-		/*
-		 * TODO: is this what we get if somebody
-		 * sets up a hierarchical bond, then rmmod's
-		 * one of the slave bonding devices?
-		 */
+		if (bond->params.mode == BOND_MODE_8023AD || bond_is_lb(bond)) {
+			struct slave *slave;
+
+			slave = bond_get_slave_by_dev(bond, slave_dev);
+			if (slave) {
+				u16 old_speed = slave->speed;
+				u16 old_duplex = slave->duplex;
+
+				bond_update_speed_duplex(slave);
+
+				if (bond_is_lb(bond))
+					break;
+
+				if (old_speed != slave->speed)
+					bond_3ad_adapter_speed_changed(slave);
+				if (old_duplex != slave->duplex)
+					bond_3ad_adapter_duplex_changed(slave);
+			}
+		}
+
 		break;
 	case NETDEV_DOWN:
 		/*
@@ -4113,7 +4128,7 @@ static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms)
 		const struct net_device_ops *slave_ops
 			= slave->dev->netdev_ops;
 		if (slave_ops->ndo_neigh_setup)
-			return slave_ops->ndo_neigh_setup(dev, parms);
+			return slave_ops->ndo_neigh_setup(slave->dev, parms);
 	}
 	return 0;
 }
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index bcf92917bbf..254ec62b5f5 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -930,13 +930,15 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
 	struct net_device *dev = dev_id;
 	board_info_t *db = netdev_priv(dev);
 	int int_status;
+	unsigned long flags;
 	u8 reg_save;
 
 	dm9000_dbg(db, 3, "entering %s\n", __func__);
 
 	/* A real interrupt coming */
 
-	spin_lock(&db->lock);
+	/* holders of db->lock must always block IRQs */
+	spin_lock_irqsave(&db->lock, flags);
 
 	/* Save previous register address */
 	reg_save = readb(db->io_addr);
@@ -972,7 +974,7 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
 	/* Restore previous register address */
 	writeb(reg_save, db->io_addr);
 
-	spin_unlock(&db->lock);
+	spin_unlock_irqrestore(&db->lock, flags);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/net/dnet.c b/drivers/net/dnet.c
new file mode 100644
index 00000000000..1b4063222a8
--- /dev/null
+++ b/drivers/net/dnet.c
@@ -0,0 +1,994 @@
+/*
+ * Dave DNET Ethernet Controller driver
+ *
+ * Copyright (C) 2008 Dave S.r.l. <www.dave.eu>
+ * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#include "dnet.h"
+
+#undef DEBUG
+
+/* function for reading internal MAC register */
+u16 dnet_readw_mac(struct dnet *bp, u16 reg)
+{
+	u16 data_read;
+
+	/* issue a read */
+	dnet_writel(bp, reg, MACREG_ADDR);
+
+	/* since a read/write op to the MAC is very slow,
+	 * we must wait before reading the data */
+	ndelay(500);
+
+	/* read data read from the MAC register */
+	data_read = dnet_readl(bp, MACREG_DATA);
+
+	/* all done */
+	return data_read;
+}
+
+/* function for writing internal MAC register */
+void dnet_writew_mac(struct dnet *bp, u16 reg, u16 val)
+{
+	/* load data to write */
+	dnet_writel(bp, val, MACREG_DATA);
+
+	/* issue a write */
+	dnet_writel(bp, reg | DNET_INTERNAL_WRITE, MACREG_ADDR);
+
+	/* since a read/write op to the MAC is very slow,
+	 * we must wait before exiting */
+	ndelay(500);
+}
+
+static void __dnet_set_hwaddr(struct dnet *bp)
+{
+	u16 tmp;
+
+	tmp = cpu_to_be16(*((u16 *) bp->dev->dev_addr));
+	dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_0_REG, tmp);
+	tmp = cpu_to_be16(*((u16 *) (bp->dev->dev_addr + 2)));
+	dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_1_REG, tmp);
+	tmp = cpu_to_be16(*((u16 *) (bp->dev->dev_addr + 4)));
+	dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_2_REG, tmp);
+}
+
+static void __devinit dnet_get_hwaddr(struct dnet *bp)
+{
+	u16 tmp;
+	u8 addr[6];
+
+	/*
+	 * from MAC docs:
+	 * "Note that the MAC address is stored in the registers in Hexadecimal
+	 * form. For example, to set the MAC Address to: AC-DE-48-00-00-80
+	 * would require writing 0xAC (octet 0) to address 0x0B (high byte of
+	 * Mac_addr[15:0]), 0xDE (octet 1) to address 0x0A (Low byte of
+	 * Mac_addr[15:0]), 0x48 (octet 2) to address 0x0D (high byte of
+	 * Mac_addr[15:0]), 0x00 (octet 3) to address 0x0C (Low byte of
+	 * Mac_addr[15:0]), 0x00 (octet 4) to address 0x0F (high byte of
+	 * Mac_addr[15:0]), and 0x80 (octet 5) to address * 0x0E (Low byte of
+	 * Mac_addr[15:0]).
+	 */
+	tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_0_REG);
+	*((u16 *) addr) = be16_to_cpu(tmp);
+	tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_1_REG);
+	*((u16 *) (addr + 2)) = be16_to_cpu(tmp);
+	tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_2_REG);
+	*((u16 *) (addr + 4)) = be16_to_cpu(tmp);
+
+	if (is_valid_ether_addr(addr))
+		memcpy(bp->dev->dev_addr, addr, sizeof(addr));
+}
+
+static int dnet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct dnet *bp = bus->priv;
+	u16 value;
+
+	while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+				& DNET_INTERNAL_GMII_MNG_CMD_FIN))
+		cpu_relax();
+
+	/* only 5 bits allowed for phy-addr and reg_offset */
+	mii_id &= 0x1f;
+	regnum &= 0x1f;
+
+	/* prepare reg_value for a read */
+	value = (mii_id << 8);
+	value |= regnum;
+
+	/* write control word */
+	dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG, value);
+
+	/* wait for end of transfer */
+	while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+				& DNET_INTERNAL_GMII_MNG_CMD_FIN))
+		cpu_relax();
+
+	value = dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_DAT_REG);
+
+	pr_debug("mdio_read %02x:%02x <- %04x\n", mii_id, regnum, value);
+
+	return value;
+}
+
+static int dnet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+			   u16 value)
+{
+	struct dnet *bp = bus->priv;
+	u16 tmp;
+
+	pr_debug("mdio_write %02x:%02x <- %04x\n", mii_id, regnum, value);
+
+	while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+				& DNET_INTERNAL_GMII_MNG_CMD_FIN))
+		cpu_relax();
+
+	/* prepare for a write operation */
+	tmp = (1 << 13);
+
+	/* only 5 bits allowed for phy-addr and reg_offset */
+	mii_id &= 0x1f;
+	regnum &= 0x1f;
+
+	/* only 16 bits on data */
+	value &= 0xffff;
+
+	/* prepare reg_value for a write */
+	tmp |= (mii_id << 8);
+	tmp |= regnum;
+
+	/* write data to write first */
+	dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_DAT_REG, value);
+
+	/* write control word */
+	dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG, tmp);
+
+	while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+				& DNET_INTERNAL_GMII_MNG_CMD_FIN))
+		cpu_relax();
+
+	return 0;
+}
+
+static int dnet_mdio_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+static void dnet_handle_link_change(struct net_device *dev)
+{
+	struct dnet *bp = netdev_priv(dev);
+	struct phy_device *phydev = bp->phy_dev;
+	unsigned long flags;
+	u32 mode_reg, ctl_reg;
+
+	int status_change = 0;
+
+	spin_lock_irqsave(&bp->lock, flags);
+
+	mode_reg = dnet_readw_mac(bp, DNET_INTERNAL_MODE_REG);
+	ctl_reg = dnet_readw_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG);
+
+	if (phydev->link) {
+		if (bp->duplex != phydev->duplex) {
+			if (phydev->duplex)
+				ctl_reg &=
+				    ~(DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP);
+			else
+				ctl_reg |=
+				    DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP;
+
+			bp->duplex = phydev->duplex;
+			status_change = 1;
+		}
+
+		if (bp->speed != phydev->speed) {
+			status_change = 1;
+			switch (phydev->speed) {
+			case 1000:
+				mode_reg |= DNET_INTERNAL_MODE_GBITEN;
+				break;
+			case 100:
+			case 10:
+				mode_reg &= ~DNET_INTERNAL_MODE_GBITEN;
+				break;
+			default:
+				printk(KERN_WARNING
+				       "%s: Ack!  Speed (%d) is not "
+				       "10/100/1000!\n", dev->name,
+				       phydev->speed);
+				break;
+			}
+			bp->speed = phydev->speed;
+		}
+	}
+
+	if (phydev->link != bp->link) {
+		if (phydev->link) {
+			mode_reg |=
+			    (DNET_INTERNAL_MODE_RXEN | DNET_INTERNAL_MODE_TXEN);
+		} else {
+			mode_reg &=
+			    ~(DNET_INTERNAL_MODE_RXEN |
+			      DNET_INTERNAL_MODE_TXEN);
+			bp->speed = 0;
+			bp->duplex = -1;
+		}
+		bp->link = phydev->link;
+
+		status_change = 1;
+	}
+
+	if (status_change) {
+		dnet_writew_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG, ctl_reg);
+		dnet_writew_mac(bp, DNET_INTERNAL_MODE_REG, mode_reg);
+	}
+
+	spin_unlock_irqrestore(&bp->lock, flags);
+
+	if (status_change) {
+		if (phydev->link)
+			printk(KERN_INFO "%s: link up (%d/%s)\n",
+			       dev->name, phydev->speed,
+			       DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+		else
+			printk(KERN_INFO "%s: link down\n", dev->name);
+	}
+}
+
+static int dnet_mii_probe(struct net_device *dev)
+{
+	struct dnet *bp = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	int phy_addr;
+
+	/* find the first phy */
+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+		if (bp->mii_bus->phy_map[phy_addr]) {
+			phydev = bp->mii_bus->phy_map[phy_addr];
+			break;
+		}
+	}
+
+	if (!phydev) {
+		printk(KERN_ERR "%s: no PHY found\n", dev->name);
+		return -ENODEV;
+	}
+
+	/* TODO : add pin_irq */
+
+	/* attach the mac to the phy */
+	if (bp->capabilities & DNET_HAS_RMII) {
+		phydev = phy_connect(dev, dev_name(&phydev->dev),
+				     &dnet_handle_link_change, 0,
+				     PHY_INTERFACE_MODE_RMII);
+	} else {
+		phydev = phy_connect(dev, dev_name(&phydev->dev),
+				     &dnet_handle_link_change, 0,
+				     PHY_INTERFACE_MODE_MII);
+	}
+
+	if (IS_ERR(phydev)) {
+		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		return PTR_ERR(phydev);
+	}
+
+	/* mask with MAC supported features */
+	if (bp->capabilities & DNET_HAS_GIGABIT)
+		phydev->supported &= PHY_GBIT_FEATURES;
+	else
+		phydev->supported &= PHY_BASIC_FEATURES;
+
+	phydev->supported |= SUPPORTED_Asym_Pause | SUPPORTED_Pause;
+
+	phydev->advertising = phydev->supported;
+
+	bp->link = 0;
+	bp->speed = 0;
+	bp->duplex = -1;
+	bp->phy_dev = phydev;
+
+	return 0;
+}
+
+static int dnet_mii_init(struct dnet *bp)
+{
+	int err, i;
+
+	bp->mii_bus = mdiobus_alloc();
+	if (bp->mii_bus == NULL)
+		return -ENOMEM;
+
+	bp->mii_bus->name = "dnet_mii_bus";
+	bp->mii_bus->read = &dnet_mdio_read;
+	bp->mii_bus->write = &dnet_mdio_write;
+	bp->mii_bus->reset = &dnet_mdio_reset;
+
+	snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+
+	bp->mii_bus->priv = bp;
+
+	bp->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!bp->mii_bus->irq) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		bp->mii_bus->irq[i] = PHY_POLL;
+
+	platform_set_drvdata(bp->dev, bp->mii_bus);
+
+	if (mdiobus_register(bp->mii_bus)) {
+		err = -ENXIO;
+		goto err_out_free_mdio_irq;
+	}
+
+	if (dnet_mii_probe(bp->dev) != 0) {
+		err = -ENXIO;
+		goto err_out_unregister_bus;
+	}
+
+	return 0;
+
+err_out_unregister_bus:
+	mdiobus_unregister(bp->mii_bus);
+err_out_free_mdio_irq:
+	kfree(bp->mii_bus->irq);
+err_out:
+	mdiobus_free(bp->mii_bus);
+	return err;
+}
+
+/* For Neptune board: LINK1000 as Link LED and TX as activity LED */
+int dnet_phy_marvell_fixup(struct phy_device *phydev)
+{
+	return phy_write(phydev, 0x18, 0x4148);
+}
+
+static void dnet_update_stats(struct dnet *bp)
+{
+	u32 __iomem *reg = bp->regs + DNET_RX_PKT_IGNR_CNT;
+	u32 *p = &bp->hw_stats.rx_pkt_ignr;
+	u32 *end = &bp->hw_stats.rx_byte + 1;
+
+	WARN_ON((unsigned long)(end - p - 1) !=
+		(DNET_RX_BYTE_CNT - DNET_RX_PKT_IGNR_CNT) / 4);
+
+	for (; p < end; p++, reg++)
+		*p += readl(reg);
+
+	reg = bp->regs + DNET_TX_UNICAST_CNT;
+	p = &bp->hw_stats.tx_unicast;
+	end = &bp->hw_stats.tx_byte + 1;
+
+	WARN_ON((unsigned long)(end - p - 1) !=
+		(DNET_TX_BYTE_CNT - DNET_TX_UNICAST_CNT) / 4);
+
+	for (; p < end; p++, reg++)
+		*p += readl(reg);
+}
+
+static int dnet_poll(struct napi_struct *napi, int budget)
+{
+	struct dnet *bp = container_of(napi, struct dnet, napi);
+	struct net_device *dev = bp->dev;
+	int npackets = 0;
+	unsigned int pkt_len;
+	struct sk_buff *skb;
+	unsigned int *data_ptr;
+	u32 int_enable;
+	u32 cmd_word;
+	int i;
+
+	while (npackets < budget) {
+		/*
+		 * break out of while loop if there are no more
+		 * packets waiting
+		 */
+		if (!(dnet_readl(bp, RX_FIFO_WCNT) >> 16)) {
+			napi_complete(napi);
+			int_enable = dnet_readl(bp, INTR_ENB);
+			int_enable |= DNET_INTR_SRC_RX_CMDFIFOAF;
+			dnet_writel(bp, int_enable, INTR_ENB);
+			return 0;
+		}
+
+		cmd_word = dnet_readl(bp, RX_LEN_FIFO);
+		pkt_len = cmd_word & 0xFFFF;
+
+		if (cmd_word & 0xDF180000)
+			printk(KERN_ERR "%s packet receive error %x\n",
+			       __func__, cmd_word);
+
+		skb = dev_alloc_skb(pkt_len + 5);
+		if (skb != NULL) {
+			/* Align IP on 16 byte boundaries */
+			skb_reserve(skb, 2);
+			/*
+			 * 'skb_put()' points to the start of sk_buff
+			 * data area.
+			 */
+			data_ptr = (unsigned int *)skb_put(skb, pkt_len);
+			for (i = 0; i < (pkt_len + 3) >> 2; i++)
+				*data_ptr++ = dnet_readl(bp, RX_DATA_FIFO);
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_receive_skb(skb);
+			npackets++;
+		} else
+			printk(KERN_NOTICE
+			       "%s: No memory to allocate a sk_buff of "
+			       "size %u.\n", dev->name, pkt_len);
+	}
+
+	budget -= npackets;
+
+	if (npackets < budget) {
+		/* We processed all packets available.  Tell NAPI it can
+		 * stop polling then re-enable rx interrupts */
+		napi_complete(napi);
+		int_enable = dnet_readl(bp, INTR_ENB);
+		int_enable |= DNET_INTR_SRC_RX_CMDFIFOAF;
+		dnet_writel(bp, int_enable, INTR_ENB);
+		return 0;
+	}
+
+	/* There are still packets waiting */
+	return 1;
+}
+
+static irqreturn_t dnet_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct dnet *bp = netdev_priv(dev);
+	u32 int_src, int_enable, int_current;
+	unsigned long flags;
+	unsigned int handled = 0;
+
+	spin_lock_irqsave(&bp->lock, flags);
+
+	/* read and clear the DNET irq (clear on read) */
+	int_src = dnet_readl(bp, INTR_SRC);
+	int_enable = dnet_readl(bp, INTR_ENB);
+	int_current = int_src & int_enable;
+
+	/* restart the queue if we had stopped it for TX fifo almost full */
+	if (int_current & DNET_INTR_SRC_TX_FIFOAE) {
+		int_enable = dnet_readl(bp, INTR_ENB);
+		int_enable &= ~DNET_INTR_ENB_TX_FIFOAE;
+		dnet_writel(bp, int_enable, INTR_ENB);
+		netif_wake_queue(dev);
+		handled = 1;
+	}
+
+	/* RX FIFO error checking */
+	if (int_current &
+	    (DNET_INTR_SRC_RX_CMDFIFOFF | DNET_INTR_SRC_RX_DATAFIFOFF)) {
+		printk(KERN_ERR "%s: RX fifo error %x, irq %x\n", __func__,
+		       dnet_readl(bp, RX_STATUS), int_current);
+		/* we can only flush the RX FIFOs */
+		dnet_writel(bp, DNET_SYS_CTL_RXFIFOFLUSH, SYS_CTL);
+		ndelay(500);
+		dnet_writel(bp, 0, SYS_CTL);
+		handled = 1;
+	}
+
+	/* TX FIFO error checking */
+	if (int_current &
+	    (DNET_INTR_SRC_TX_FIFOFULL | DNET_INTR_SRC_TX_DISCFRM)) {
+		printk(KERN_ERR "%s: TX fifo error %x, irq %x\n", __func__,
+		       dnet_readl(bp, TX_STATUS), int_current);
+		/* we can only flush the TX FIFOs */
+		dnet_writel(bp, DNET_SYS_CTL_TXFIFOFLUSH, SYS_CTL);
+		ndelay(500);
+		dnet_writel(bp, 0, SYS_CTL);
+		handled = 1;
+	}
+
+	if (int_current & DNET_INTR_SRC_RX_CMDFIFOAF) {
+		if (napi_schedule_prep(&bp->napi)) {
+			/*
+			 * There's no point taking any more interrupts
+			 * until we have processed the buffers
+			 */
+			/* Disable Rx interrupts and schedule NAPI poll */
+			int_enable = dnet_readl(bp, INTR_ENB);
+			int_enable &= ~DNET_INTR_SRC_RX_CMDFIFOAF;
+			dnet_writel(bp, int_enable, INTR_ENB);
+			__napi_schedule(&bp->napi);
+		}
+		handled = 1;
+	}
+
+	if (!handled)
+		pr_debug("%s: irq %x remains\n", __func__, int_current);
+
+	spin_unlock_irqrestore(&bp->lock, flags);
+
+	return IRQ_RETVAL(handled);
+}
+
+#ifdef DEBUG
+static inline void dnet_print_skb(struct sk_buff *skb)
+{
+	int k;
+	printk(KERN_DEBUG PFX "data:");
+	for (k = 0; k < skb->len; k++)
+		printk(" %02x", (unsigned int)skb->data[k]);
+	printk("\n");
+}
+#else
+#define dnet_print_skb(skb)	do {} while (0)
+#endif
+
+static int dnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+
+	struct dnet *bp = netdev_priv(dev);
+	u32 tx_status, irq_enable;
+	unsigned int len, i, tx_cmd, wrsz;
+	unsigned long flags;
+	unsigned int *bufp;
+
+	tx_status = dnet_readl(bp, TX_STATUS);
+
+	pr_debug("start_xmit: len %u head %p data %p\n",
+	       skb->len, skb->head, skb->data);
+	dnet_print_skb(skb);
+
+	/* frame size (words) */
+	len = (skb->len + 3) >> 2;
+
+	spin_lock_irqsave(&bp->lock, flags);
+
+	tx_status = dnet_readl(bp, TX_STATUS);
+
+	bufp = (unsigned int *)(((unsigned long) skb->data) & ~0x3UL);
+	wrsz = (u32) skb->len + 3;
+	wrsz += ((unsigned long) skb->data) & 0x3;
+	wrsz >>= 2;
+	tx_cmd = ((((unsigned long)(skb->data)) & 0x03) << 16) | (u32) skb->len;
+
+	/* check if there is enough room for the current frame */
+	if (wrsz < (DNET_FIFO_SIZE - dnet_readl(bp, TX_FIFO_WCNT))) {
+		for (i = 0; i < wrsz; i++)
+			dnet_writel(bp, *bufp++, TX_DATA_FIFO);
+
+		/*
+		 * inform MAC that a packet's written and ready to be
+		 * shipped out
+		 */
+		dnet_writel(bp, tx_cmd, TX_LEN_FIFO);
+	}
+
+	if (dnet_readl(bp, TX_FIFO_WCNT) > DNET_FIFO_TX_DATA_AF_TH) {
+		netif_stop_queue(dev);
+		tx_status = dnet_readl(bp, INTR_SRC);
+		irq_enable = dnet_readl(bp, INTR_ENB);
+		irq_enable |= DNET_INTR_ENB_TX_FIFOAE;
+		dnet_writel(bp, irq_enable, INTR_ENB);
+	}
+
+	/* free the buffer */
+	dev_kfree_skb(skb);
+
+	spin_unlock_irqrestore(&bp->lock, flags);
+
+	dev->trans_start = jiffies;
+
+	return 0;
+}
+
+static void dnet_reset_hw(struct dnet *bp)
+{
+	/* put ts_mac in IDLE state i.e. disable rx/tx */
+	dnet_writew_mac(bp, DNET_INTERNAL_MODE_REG, DNET_INTERNAL_MODE_FCEN);
+
+	/*
+	 * RX FIFO almost full threshold: only cmd FIFO almost full is
+	 * implemented for RX side
+	 */
+	dnet_writel(bp, DNET_FIFO_RX_CMD_AF_TH, RX_FIFO_TH);
+	/*
+	 * TX FIFO almost empty threshold: only data FIFO almost empty
+	 * is implemented for TX side
+	 */
+	dnet_writel(bp, DNET_FIFO_TX_DATA_AE_TH, TX_FIFO_TH);
+
+	/* flush rx/tx fifos */
+	dnet_writel(bp, DNET_SYS_CTL_RXFIFOFLUSH | DNET_SYS_CTL_TXFIFOFLUSH,
+			SYS_CTL);
+	msleep(1);
+	dnet_writel(bp, 0, SYS_CTL);
+}
+
+static void dnet_init_hw(struct dnet *bp)
+{
+	u32 config;
+
+	dnet_reset_hw(bp);
+	__dnet_set_hwaddr(bp);
+
+	config = dnet_readw_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG);
+
+	if (bp->dev->flags & IFF_PROMISC)
+		/* Copy All Frames */
+		config |= DNET_INTERNAL_RXTX_CONTROL_ENPROMISC;
+	if (!(bp->dev->flags & IFF_BROADCAST))
+		/* No BroadCast */
+		config |= DNET_INTERNAL_RXTX_CONTROL_RXMULTICAST;
+
+	config |= DNET_INTERNAL_RXTX_CONTROL_RXPAUSE |
+	    DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST |
+	    DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL |
+	    DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS;
+
+	dnet_writew_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG, config);
+
+	/* clear irq before enabling them */
+	config = dnet_readl(bp, INTR_SRC);
+
+	/* enable RX/TX interrupt, recv packet ready interrupt */
+	dnet_writel(bp, DNET_INTR_ENB_GLOBAL_ENABLE | DNET_INTR_ENB_RX_SUMMARY |
+			DNET_INTR_ENB_TX_SUMMARY | DNET_INTR_ENB_RX_FIFOERR |
+			DNET_INTR_ENB_RX_ERROR | DNET_INTR_ENB_RX_FIFOFULL |
+			DNET_INTR_ENB_TX_FIFOFULL | DNET_INTR_ENB_TX_DISCFRM |
+			DNET_INTR_ENB_RX_PKTRDY, INTR_ENB);
+}
+
+static int dnet_open(struct net_device *dev)
+{
+	struct dnet *bp = netdev_priv(dev);
+
+	/* if the phy is not yet register, retry later */
+	if (!bp->phy_dev)
+		return -EAGAIN;
+
+	if (!is_valid_ether_addr(dev->dev_addr))
+		return -EADDRNOTAVAIL;
+
+	napi_enable(&bp->napi);
+	dnet_init_hw(bp);
+
+	phy_start_aneg(bp->phy_dev);
+
+	/* schedule a link state check */
+	phy_start(bp->phy_dev);
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static int dnet_close(struct net_device *dev)
+{
+	struct dnet *bp = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	napi_disable(&bp->napi);
+
+	if (bp->phy_dev)
+		phy_stop(bp->phy_dev);
+
+	dnet_reset_hw(bp);
+	netif_carrier_off(dev);
+
+	return 0;
+}
+
+static inline void dnet_print_pretty_hwstats(struct dnet_stats *hwstat)
+{
+	pr_debug("%s\n", __func__);
+	pr_debug("----------------------------- RX statistics "
+		 "-------------------------------\n");
+	pr_debug("RX_PKT_IGNR_CNT %-8x\n", hwstat->rx_pkt_ignr);
+	pr_debug("RX_LEN_CHK_ERR_CNT %-8x\n", hwstat->rx_len_chk_err);
+	pr_debug("RX_LNG_FRM_CNT %-8x\n", hwstat->rx_lng_frm);
+	pr_debug("RX_SHRT_FRM_CNT %-8x\n", hwstat->rx_shrt_frm);
+	pr_debug("RX_IPG_VIOL_CNT %-8x\n", hwstat->rx_ipg_viol);
+	pr_debug("RX_CRC_ERR_CNT %-8x\n", hwstat->rx_crc_err);
+	pr_debug("RX_OK_PKT_CNT %-8x\n", hwstat->rx_ok_pkt);
+	pr_debug("RX_CTL_FRM_CNT %-8x\n", hwstat->rx_ctl_frm);
+	pr_debug("RX_PAUSE_FRM_CNT %-8x\n", hwstat->rx_pause_frm);
+	pr_debug("RX_MULTICAST_CNT %-8x\n", hwstat->rx_multicast);
+	pr_debug("RX_BROADCAST_CNT %-8x\n", hwstat->rx_broadcast);
+	pr_debug("RX_VLAN_TAG_CNT %-8x\n", hwstat->rx_vlan_tag);
+	pr_debug("RX_PRE_SHRINK_CNT %-8x\n", hwstat->rx_pre_shrink);
+	pr_debug("RX_DRIB_NIB_CNT %-8x\n", hwstat->rx_drib_nib);
+	pr_debug("RX_UNSUP_OPCD_CNT %-8x\n", hwstat->rx_unsup_opcd);
+	pr_debug("RX_BYTE_CNT %-8x\n", hwstat->rx_byte);
+	pr_debug("----------------------------- TX statistics "
+		 "-------------------------------\n");
+	pr_debug("TX_UNICAST_CNT %-8x\n", hwstat->tx_unicast);
+	pr_debug("TX_PAUSE_FRM_CNT %-8x\n", hwstat->tx_pause_frm);
+	pr_debug("TX_MULTICAST_CNT %-8x\n", hwstat->tx_multicast);
+	pr_debug("TX_BRDCAST_CNT %-8x\n", hwstat->tx_brdcast);
+	pr_debug("TX_VLAN_TAG_CNT %-8x\n", hwstat->tx_vlan_tag);
+	pr_debug("TX_BAD_FCS_CNT %-8x\n", hwstat->tx_bad_fcs);
+	pr_debug("TX_JUMBO_CNT %-8x\n", hwstat->tx_jumbo);
+	pr_debug("TX_BYTE_CNT %-8x\n", hwstat->tx_byte);
+}
+
+static struct net_device_stats *dnet_get_stats(struct net_device *dev)
+{
+
+	struct dnet *bp = netdev_priv(dev);
+	struct net_device_stats *nstat = &dev->stats;
+	struct dnet_stats *hwstat = &bp->hw_stats;
+
+	/* read stats from hardware */
+	dnet_update_stats(bp);
+
+	/* Convert HW stats into netdevice stats */
+	nstat->rx_errors = (hwstat->rx_len_chk_err +
+			    hwstat->rx_lng_frm + hwstat->rx_shrt_frm +
+			    /* ignore IGP violation error
+			    hwstat->rx_ipg_viol + */
+			    hwstat->rx_crc_err +
+			    hwstat->rx_pre_shrink +
+			    hwstat->rx_drib_nib + hwstat->rx_unsup_opcd);
+	nstat->tx_errors = hwstat->tx_bad_fcs;
+	nstat->rx_length_errors = (hwstat->rx_len_chk_err +
+				   hwstat->rx_lng_frm +
+				   hwstat->rx_shrt_frm + hwstat->rx_pre_shrink);
+	nstat->rx_crc_errors = hwstat->rx_crc_err;
+	nstat->rx_frame_errors = hwstat->rx_pre_shrink + hwstat->rx_drib_nib;
+	nstat->rx_packets = hwstat->rx_ok_pkt;
+	nstat->tx_packets = (hwstat->tx_unicast +
+			     hwstat->tx_multicast + hwstat->tx_brdcast);
+	nstat->rx_bytes = hwstat->rx_byte;
+	nstat->tx_bytes = hwstat->tx_byte;
+	nstat->multicast = hwstat->rx_multicast;
+	nstat->rx_missed_errors = hwstat->rx_pkt_ignr;
+
+	dnet_print_pretty_hwstats(hwstat);
+
+	return nstat;
+}
+
+static int dnet_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct dnet *bp = netdev_priv(dev);
+	struct phy_device *phydev = bp->phy_dev;
+
+	if (!phydev)
+		return -ENODEV;
+
+	return phy_ethtool_gset(phydev, cmd);
+}
+
+static int dnet_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct dnet *bp = netdev_priv(dev);
+	struct phy_device *phydev = bp->phy_dev;
+
+	if (!phydev)
+		return -ENODEV;
+
+	return phy_ethtool_sset(phydev, cmd);
+}
+
+static int dnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct dnet *bp = netdev_priv(dev);
+	struct phy_device *phydev = bp->phy_dev;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	if (!phydev)
+		return -ENODEV;
+
+	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
+}
+
+static void dnet_get_drvinfo(struct net_device *dev,
+			     struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, "0");
+}
+
+static const struct ethtool_ops dnet_ethtool_ops = {
+	.get_settings		= dnet_get_settings,
+	.set_settings		= dnet_set_settings,
+	.get_drvinfo		= dnet_get_drvinfo,
+	.get_link		= ethtool_op_get_link,
+};
+
+static const struct net_device_ops dnet_netdev_ops = {
+	.ndo_open		= dnet_open,
+	.ndo_stop		= dnet_close,
+	.ndo_get_stats		= dnet_get_stats,
+	.ndo_start_xmit		= dnet_start_xmit,
+	.ndo_do_ioctl		= dnet_ioctl,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
+static int __devinit dnet_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct net_device *dev;
+	struct dnet *bp;
+	struct phy_device *phydev;
+	int err = -ENXIO;
+	unsigned int mem_base, mem_size, irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no mmio resource defined\n");
+		goto err_out;
+	}
+	mem_base = res->start;
+	mem_size = resource_size(res);
+	irq = platform_get_irq(pdev, 0);
+
+	if (!request_mem_region(mem_base, mem_size, DRV_NAME)) {
+		dev_err(&pdev->dev, "no memory region available\n");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	err = -ENOMEM;
+	dev = alloc_etherdev(sizeof(*bp));
+	if (!dev) {
+		dev_err(&pdev->dev, "etherdev alloc failed, aborting.\n");
+		goto err_out;
+	}
+
+	/* TODO: Actually, we have some interesting features... */
+	dev->features |= 0;
+
+	bp = netdev_priv(dev);
+	bp->dev = dev;
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	spin_lock_init(&bp->lock);
+
+	bp->regs = ioremap(mem_base, mem_size);
+	if (!bp->regs) {
+		dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+		err = -ENOMEM;
+		goto err_out_free_dev;
+	}
+
+	dev->irq = irq;
+	err = request_irq(dev->irq, dnet_interrupt, 0, DRV_NAME, dev);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to request IRQ %d (error %d)\n",
+		       irq, err);
+		goto err_out_iounmap;
+	}
+
+	dev->netdev_ops = &dnet_netdev_ops;
+	netif_napi_add(dev, &bp->napi, dnet_poll, 64);
+	dev->ethtool_ops = &dnet_ethtool_ops;
+
+	dev->base_addr = (unsigned long)bp->regs;
+
+	bp->capabilities = dnet_readl(bp, VERCAPS) & DNET_CAPS_MASK;
+
+	dnet_get_hwaddr(bp);
+
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		/* choose a random ethernet address */
+		random_ether_addr(dev->dev_addr);
+		__dnet_set_hwaddr(bp);
+	}
+
+	err = register_netdev(dev);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
+		goto err_out_free_irq;
+	}
+
+	/* register the PHY board fixup (for Marvell 88E1111) */
+	err = phy_register_fixup_for_uid(0x01410cc0, 0xfffffff0,
+					 dnet_phy_marvell_fixup);
+	/* we can live without it, so just issue a warning */
+	if (err)
+		dev_warn(&pdev->dev, "Cannot register PHY board fixup.\n");
+
+	if (dnet_mii_init(bp) != 0)
+		goto err_out_unregister_netdev;
+
+	dev_info(&pdev->dev, "Dave DNET at 0x%p (0x%08x) irq %d %pM\n",
+	       bp->regs, mem_base, dev->irq, dev->dev_addr);
+	dev_info(&pdev->dev, "has %smdio, %sirq, %sgigabit, %sdma \n",
+	       (bp->capabilities & DNET_HAS_MDIO) ? "" : "no ",
+	       (bp->capabilities & DNET_HAS_IRQ) ? "" : "no ",
+	       (bp->capabilities & DNET_HAS_GIGABIT) ? "" : "no ",
+	       (bp->capabilities & DNET_HAS_DMA) ? "" : "no ");
+	phydev = bp->phy_dev;
+	dev_info(&pdev->dev, "attached PHY driver [%s] "
+	       "(mii_bus:phy_addr=%s, irq=%d)\n",
+	       phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+
+	return 0;
+
+err_out_unregister_netdev:
+	unregister_netdev(dev);
+err_out_free_irq:
+	free_irq(dev->irq, dev);
+err_out_iounmap:
+	iounmap(bp->regs);
+err_out_free_dev:
+	free_netdev(dev);
+err_out:
+	return err;
+}
+
+static int __devexit dnet_remove(struct platform_device *pdev)
+{
+
+	struct net_device *dev;
+	struct dnet *bp;
+
+	dev = platform_get_drvdata(pdev);
+
+	if (dev) {
+		bp = netdev_priv(dev);
+		if (bp->phy_dev)
+			phy_disconnect(bp->phy_dev);
+		mdiobus_unregister(bp->mii_bus);
+		kfree(bp->mii_bus->irq);
+		mdiobus_free(bp->mii_bus);
+		unregister_netdev(dev);
+		free_irq(dev->irq, dev);
+		iounmap(bp->regs);
+		free_netdev(dev);
+	}
+
+	return 0;
+}
+
+static struct platform_driver dnet_driver = {
+	.probe		= dnet_probe,
+	.remove		= __devexit_p(dnet_remove),
+	.driver		= {
+		.name		= "dnet",
+	},
+};
+
+static int __init dnet_init(void)
+{
+	return platform_driver_register(&dnet_driver);
+}
+
+static void __exit dnet_exit(void)
+{
+	platform_driver_unregister(&dnet_driver);
+}
+
+module_init(dnet_init);
+module_exit(dnet_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Dave DNET Ethernet driver");
+MODULE_AUTHOR("Ilya Yanok <yanok@emcraft.com>, "
+	      "Matteo Vit <matteo.vit@dave.eu>");
diff --git a/drivers/net/dnet.h b/drivers/net/dnet.h
new file mode 100644
index 00000000000..37f5b30fa78
--- /dev/null
+++ b/drivers/net/dnet.h
@@ -0,0 +1,225 @@
+/*
+ * Dave DNET Ethernet Controller driver
+ *
+ * Copyright (C) 2008 Dave S.r.l. <www.dave.eu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _DNET_H
+#define _DNET_H
+
+#define DRV_NAME		"dnet"
+#define DRV_VERSION		"0.9.1"
+#define PFX				DRV_NAME ": "
+
+/* Register access macros */
+#define dnet_writel(port, value, reg)	\
+	writel((value), (port)->regs + DNET_##reg)
+#define dnet_readl(port, reg)	readl((port)->regs + DNET_##reg)
+
+/* ALL DNET FIFO REGISTERS */
+#define DNET_RX_LEN_FIFO		0x000	/* RX_LEN_FIFO */
+#define DNET_RX_DATA_FIFO		0x004	/* RX_DATA_FIFO */
+#define DNET_TX_LEN_FIFO		0x008	/* TX_LEN_FIFO */
+#define DNET_TX_DATA_FIFO		0x00C	/* TX_DATA_FIFO */
+
+/* ALL DNET CONTROL/STATUS REGISTERS OFFSETS */
+#define DNET_VERCAPS			0x100	/* VERCAPS */
+#define DNET_INTR_SRC			0x104	/* INTR_SRC */
+#define DNET_INTR_ENB			0x108	/* INTR_ENB */
+#define DNET_RX_STATUS			0x10C	/* RX_STATUS */
+#define DNET_TX_STATUS			0x110	/* TX_STATUS */
+#define DNET_RX_FRAMES_CNT		0x114	/* RX_FRAMES_CNT */
+#define DNET_TX_FRAMES_CNT		0x118	/* TX_FRAMES_CNT */
+#define DNET_RX_FIFO_TH			0x11C	/* RX_FIFO_TH */
+#define DNET_TX_FIFO_TH			0x120	/* TX_FIFO_TH */
+#define DNET_SYS_CTL			0x124	/* SYS_CTL */
+#define DNET_PAUSE_TMR			0x128	/* PAUSE_TMR */
+#define DNET_RX_FIFO_WCNT		0x12C	/* RX_FIFO_WCNT */
+#define DNET_TX_FIFO_WCNT		0x130	/* TX_FIFO_WCNT */
+
+/* ALL DNET MAC REGISTERS */
+#define DNET_MACREG_DATA		0x200	/* Mac-Reg Data */
+#define DNET_MACREG_ADDR		0x204	/* Mac-Reg Addr  */
+
+/* ALL DNET RX STATISTICS COUNTERS  */
+#define DNET_RX_PKT_IGNR_CNT		0x300
+#define DNET_RX_LEN_CHK_ERR_CNT		0x304
+#define DNET_RX_LNG_FRM_CNT		0x308
+#define DNET_RX_SHRT_FRM_CNT		0x30C
+#define DNET_RX_IPG_VIOL_CNT		0x310
+#define DNET_RX_CRC_ERR_CNT		0x314
+#define DNET_RX_OK_PKT_CNT		0x318
+#define DNET_RX_CTL_FRM_CNT		0x31C
+#define DNET_RX_PAUSE_FRM_CNT		0x320
+#define DNET_RX_MULTICAST_CNT		0x324
+#define DNET_RX_BROADCAST_CNT		0x328
+#define DNET_RX_VLAN_TAG_CNT		0x32C
+#define DNET_RX_PRE_SHRINK_CNT		0x330
+#define DNET_RX_DRIB_NIB_CNT		0x334
+#define DNET_RX_UNSUP_OPCD_CNT		0x338
+#define DNET_RX_BYTE_CNT		0x33C
+
+/* DNET TX STATISTICS COUNTERS */
+#define DNET_TX_UNICAST_CNT		0x400
+#define DNET_TX_PAUSE_FRM_CNT		0x404
+#define DNET_TX_MULTICAST_CNT		0x408
+#define DNET_TX_BRDCAST_CNT		0x40C
+#define DNET_TX_VLAN_TAG_CNT		0x410
+#define DNET_TX_BAD_FCS_CNT		0x414
+#define DNET_TX_JUMBO_CNT		0x418
+#define DNET_TX_BYTE_CNT		0x41C
+
+/* SOME INTERNAL MAC-CORE REGISTER */
+#define DNET_INTERNAL_MODE_REG		0x0
+#define DNET_INTERNAL_RXTX_CONTROL_REG	0x2
+#define DNET_INTERNAL_MAX_PKT_SIZE_REG	0x4
+#define DNET_INTERNAL_IGP_REG		0x8
+#define DNET_INTERNAL_MAC_ADDR_0_REG	0xa
+#define DNET_INTERNAL_MAC_ADDR_1_REG	0xc
+#define DNET_INTERNAL_MAC_ADDR_2_REG	0xe
+#define DNET_INTERNAL_TX_RX_STS_REG	0x12
+#define DNET_INTERNAL_GMII_MNG_CTL_REG	0x14
+#define DNET_INTERNAL_GMII_MNG_DAT_REG	0x16
+
+#define DNET_INTERNAL_GMII_MNG_CMD_FIN	(1 << 14)
+
+#define DNET_INTERNAL_WRITE		(1 << 31)
+
+/* MAC-CORE REGISTER FIELDS */
+
+/* MAC-CORE MODE REGISTER FIELDS */
+#define DNET_INTERNAL_MODE_GBITEN			(1 << 0)
+#define DNET_INTERNAL_MODE_FCEN				(1 << 1)
+#define DNET_INTERNAL_MODE_RXEN				(1 << 2)
+#define DNET_INTERNAL_MODE_TXEN				(1 << 3)
+
+/* MAC-CORE RXTX CONTROL REGISTER FIELDS */
+#define DNET_INTERNAL_RXTX_CONTROL_RXSHORTFRAME		(1 << 8)
+#define DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST		(1 << 7)
+#define DNET_INTERNAL_RXTX_CONTROL_RXMULTICAST		(1 << 4)
+#define DNET_INTERNAL_RXTX_CONTROL_RXPAUSE		(1 << 3)
+#define DNET_INTERNAL_RXTX_CONTROL_DISTXFCS		(1 << 2)
+#define DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS		(1 << 1)
+#define DNET_INTERNAL_RXTX_CONTROL_ENPROMISC		(1 << 0)
+#define DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL		(1 << 6)
+#define DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP	(1 << 5)
+
+/* SYSTEM CONTROL REGISTER FIELDS */
+#define DNET_SYS_CTL_IGNORENEXTPKT			(1 << 0)
+#define DNET_SYS_CTL_SENDPAUSE				(1 << 2)
+#define DNET_SYS_CTL_RXFIFOFLUSH			(1 << 3)
+#define DNET_SYS_CTL_TXFIFOFLUSH			(1 << 4)
+
+/* TX STATUS REGISTER FIELDS */
+#define DNET_TX_STATUS_FIFO_ALMOST_EMPTY		(1 << 2)
+#define DNET_TX_STATUS_FIFO_ALMOST_FULL			(1 << 1)
+
+/* INTERRUPT SOURCE REGISTER FIELDS */
+#define DNET_INTR_SRC_TX_PKTSENT			(1 << 0)
+#define DNET_INTR_SRC_TX_FIFOAF				(1 << 1)
+#define DNET_INTR_SRC_TX_FIFOAE				(1 << 2)
+#define DNET_INTR_SRC_TX_DISCFRM			(1 << 3)
+#define DNET_INTR_SRC_TX_FIFOFULL			(1 << 4)
+#define DNET_INTR_SRC_RX_CMDFIFOAF			(1 << 8)
+#define DNET_INTR_SRC_RX_CMDFIFOFF			(1 << 9)
+#define DNET_INTR_SRC_RX_DATAFIFOFF			(1 << 10)
+#define DNET_INTR_SRC_TX_SUMMARY			(1 << 16)
+#define DNET_INTR_SRC_RX_SUMMARY			(1 << 17)
+#define DNET_INTR_SRC_PHY				(1 << 19)
+
+/* INTERRUPT ENABLE REGISTER FIELDS */
+#define DNET_INTR_ENB_TX_PKTSENT			(1 << 0)
+#define DNET_INTR_ENB_TX_FIFOAF				(1 << 1)
+#define DNET_INTR_ENB_TX_FIFOAE				(1 << 2)
+#define DNET_INTR_ENB_TX_DISCFRM			(1 << 3)
+#define DNET_INTR_ENB_TX_FIFOFULL			(1 << 4)
+#define DNET_INTR_ENB_RX_PKTRDY				(1 << 8)
+#define DNET_INTR_ENB_RX_FIFOAF				(1 << 9)
+#define DNET_INTR_ENB_RX_FIFOERR			(1 << 10)
+#define DNET_INTR_ENB_RX_ERROR				(1 << 11)
+#define DNET_INTR_ENB_RX_FIFOFULL			(1 << 12)
+#define DNET_INTR_ENB_RX_FIFOAE				(1 << 13)
+#define DNET_INTR_ENB_TX_SUMMARY			(1 << 16)
+#define DNET_INTR_ENB_RX_SUMMARY			(1 << 17)
+#define DNET_INTR_ENB_GLOBAL_ENABLE			(1 << 18)
+
+/* default values:
+ * almost empty = less than one full sized ethernet frame (no jumbo) inside
+ * the fifo almost full = can write less than one full sized ethernet frame
+ * (no jumbo) inside the fifo
+ */
+#define DNET_CFG_TX_FIFO_FULL_THRES	25
+#define DNET_CFG_RX_FIFO_FULL_THRES	20
+
+/*
+ * Capabilities. Used by the driver to know the capabilities that the ethernet
+ * controller inside the FPGA have.
+ */
+
+#define DNET_HAS_MDIO		(1 << 0)
+#define DNET_HAS_IRQ		(1 << 1)
+#define DNET_HAS_GIGABIT	(1 << 2)
+#define DNET_HAS_DMA		(1 << 3)
+
+#define DNET_HAS_MII		(1 << 4) /* or GMII */
+#define DNET_HAS_RMII		(1 << 5) /* or RGMII */
+
+#define DNET_CAPS_MASK		0xFFFF
+
+#define DNET_FIFO_SIZE		1024 /* 1K x 32 bit */
+#define DNET_FIFO_TX_DATA_AF_TH	(DNET_FIFO_SIZE - 384) /* 384 = 1536 / 4 */
+#define DNET_FIFO_TX_DATA_AE_TH	384
+
+#define DNET_FIFO_RX_CMD_AF_TH	(1 << 16) /* just one frame inside the FIFO */
+
+/*
+ * Hardware-collected statistics.
+ */
+struct dnet_stats {
+	u32 rx_pkt_ignr;
+	u32 rx_len_chk_err;
+	u32 rx_lng_frm;
+	u32 rx_shrt_frm;
+	u32 rx_ipg_viol;
+	u32 rx_crc_err;
+	u32 rx_ok_pkt;
+	u32 rx_ctl_frm;
+	u32 rx_pause_frm;
+	u32 rx_multicast;
+	u32 rx_broadcast;
+	u32 rx_vlan_tag;
+	u32 rx_pre_shrink;
+	u32 rx_drib_nib;
+	u32 rx_unsup_opcd;
+	u32 rx_byte;
+	u32 tx_unicast;
+	u32 tx_pause_frm;
+	u32 tx_multicast;
+	u32 tx_brdcast;
+	u32 tx_vlan_tag;
+	u32 tx_bad_fcs;
+	u32 tx_jumbo;
+	u32 tx_byte;
+};
+
+struct dnet {
+	void __iomem			*regs;
+	spinlock_t			lock;
+	struct platform_device		*pdev;
+	struct net_device		*dev;
+	struct dnet_stats		hw_stats;
+	unsigned int			capabilities; /* read from FPGA */
+	struct napi_struct		napi;
+
+	/* PHY stuff */
+	struct mii_bus			*mii_bus;
+	struct phy_device		*phy_dev;
+	unsigned int			link;
+	unsigned int			speed;
+	unsigned int			duplex;
+};
+
+#endif /* _DNET_H */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 87a706694fb..6fd7aa61736 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2594,6 +2594,9 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 		if (of_device_is_compatible(np, "ibm,emac-460ex") ||
 		    of_device_is_compatible(np, "ibm,emac-460gt"))
 			dev->features |= EMAC_FTR_460EX_PHY_CLK_FIX;
+		if (of_device_is_compatible(np, "ibm,emac-405ex") ||
+		    of_device_is_compatible(np, "ibm,emac-405exr"))
+			dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
 	} else if (of_device_is_compatible(np, "ibm,emac4")) {
 		dev->features |= EMAC_FTR_EMAC4;
 		if (of_device_is_compatible(np, "ibm,emac-440gx"))
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index a50db5398fa..9dd13ad12ce 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1023,11 +1023,10 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	struct net_device *netdev;
 	struct igb_adapter *adapter;
 	struct e1000_hw *hw;
-	struct pci_dev *us_dev;
 	const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
 	unsigned long mmio_start, mmio_len;
-	int i, err, pci_using_dac, pos;
-	u16 eeprom_data = 0, state = 0;
+	int i, err, pci_using_dac;
+	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = IGB_EEPROM_APME;
 	u32 part_num;
 	int bars, need_ioport;
@@ -1062,27 +1061,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		}
 	}
 
-	/* 82575 requires that the pci-e link partner disable the L0s state */
-	switch (pdev->device) {
-	case E1000_DEV_ID_82575EB_COPPER:
-	case E1000_DEV_ID_82575EB_FIBER_SERDES:
-	case E1000_DEV_ID_82575GB_QUAD_COPPER:
-		us_dev = pdev->bus->self;
-		pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
-		if (pos) {
-			pci_read_config_word(us_dev, pos + PCI_EXP_LNKCTL,
-			                     &state);
-			state &= ~PCIE_LINK_STATE_L0S;
-			pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
-			                      state);
-			dev_info(&pdev->dev,
-				 "Disabling ASPM L0s upstream switch port %s\n",
-				 pci_name(us_dev));
-		}
-	default:
-		break;
-	}
-
 	err = pci_request_selected_regions(pdev, bars, igb_driver_name);
 	if (err)
 		goto err_pci_reg;
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 31794c2363e..e775338b525 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -24,9 +24,8 @@
 
 #include <mach/dma.h>
 #include <mach/irda.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-uart.h>
+#include <mach/regs-ost.h>
 
 #define FICP		__REG(0x40800000)  /* Start of FICP area */
 #define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index d2f4d5f508b..5d364a96e35 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3973,6 +3973,7 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_stop		= ixgbe_close,
 	.ndo_start_xmit		= ixgbe_xmit_frame,
 	.ndo_get_stats		= ixgbe_get_stats,
+	.ndo_set_rx_mode        = ixgbe_set_rx_mode,
 	.ndo_set_multicast_list	= ixgbe_set_rx_mode,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ixgbe_set_mac,
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 08b34051c64..a6e1a35a13c 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -957,13 +957,14 @@ jme_process_receive(struct jme_adapter *jme, int limit)
 		goto out_inc;
 
 	i = atomic_read(&rxring->next_to_clean);
-	while (limit-- > 0) {
+	while (limit > 0) {
 		rxdesc = rxring->desc;
 		rxdesc += i;
 
 		if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
 		!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
 			goto out;
+		--limit;
 
 		desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
 
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 13f11f402a9..b0bc3bc18e9 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -2030,11 +2030,6 @@ static void port_start(struct mv643xx_eth_private *mp)
 	}
 
 	/*
-	 * Add configured unicast address to address filter table.
-	 */
-	mv643xx_eth_program_unicast_filter(mp->dev);
-
-	/*
 	 * Receive all unmatched unicast, TCP, UDP, BPDU and broadcast
 	 * frames to RX queue #0, and include the pseudo-header when
 	 * calculating receive checksums.
@@ -2047,6 +2042,11 @@ static void port_start(struct mv643xx_eth_private *mp)
 	wrlp(mp, PORT_CONFIG_EXT, 0x00000000);
 
 	/*
+	 * Add configured unicast addresses to address filter table.
+	 */
+	mv643xx_eth_program_unicast_filter(mp->dev);
+
+	/*
 	 * Enable the receive queues.
 	 */
 	for (i = 0; i < mp->rxq_count; i++) {
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index f4dd9acb687..1ff066b2281 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1595,7 +1595,6 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 }
 
 
-int netxen_is_flash_supported(struct netxen_adapter *adapter);
 int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
 int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
 extern void netxen_change_ringparam(struct netxen_adapter *adapter);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 821cff68b3f..7fea7708810 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -706,28 +706,6 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 	return rc;
 }
 
-int netxen_is_flash_supported(struct netxen_adapter *adapter)
-{
-	const int locs[] = { 0, 0x4, 0x100, 0x4000, 0x4128 };
-	int addr, val01, val02, i, j;
-
-	/* if the flash size less than 4Mb, make huge war cry and die */
-	for (j = 1; j < 4; j++) {
-		addr = j * NETXEN_NIC_WINDOW_MARGIN;
-		for (i = 0; i < ARRAY_SIZE(locs); i++) {
-			if (netxen_rom_fast_read(adapter, locs[i], &val01) == 0
-			    && netxen_rom_fast_read(adapter, (addr + locs[i]),
-						    &val02) == 0) {
-				if (val01 == val02)
-					return -1;
-			} else
-				return -1;
-		}
-	}
-
-	return 0;
-}
-
 static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
 				  int size, __le32 * buf)
 {
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 13087782ac4..c172b6e24a9 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -405,9 +405,6 @@ netxen_read_mac_addr(struct netxen_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 
-	if (netxen_is_flash_supported(adapter) != 0)
-		return -EIO;
-
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		if (netxen_p3_get_mac_addr(adapter, &mac_addr) != 0)
 			return -EIO;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index e5cb6b1f0eb..2404a838b1f 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1035,7 +1035,8 @@ static int el3_rx(struct net_device *dev, int worklimit)
 	DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 		  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
 	while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
-		   (--worklimit >= 0)) {
+			worklimit > 0) {
+		worklimit--;
 		if (rx_status & 0x4000) { /* Error, update stats. */
 			short error = rx_status & 0x3800;
 			dev->stats.rx_errors++;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 73ecc657999..1e01b8a6dbf 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -857,7 +857,8 @@ static int el3_rx(struct net_device *dev)
     DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 	  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
     while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
-	   (--worklimit >= 0)) {
+		    worklimit > 0) {
+	worklimit--;
 	if (rx_status & 0x4000) { /* Error, update stats. */
 	    short error = rx_status & 0x3800;
 	    dev->stats.rx_errors++;
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index e6fdce9206c..aff9c5fec73 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -927,6 +927,7 @@ struct ib_mac_iocb_rsp {
 	u8 flags1;
 #define IB_MAC_IOCB_RSP_OI	0x01	/* Overide intr delay */
 #define IB_MAC_IOCB_RSP_I	0x02	/* Disble Intr Generation */
+#define IB_MAC_CSUM_ERR_MASK 0x1c	/* A mask to use for csum errs */
 #define IB_MAC_IOCB_RSP_TE	0x04	/* Checksum error */
 #define IB_MAC_IOCB_RSP_NU	0x08	/* No checksum rcvd */
 #define IB_MAC_IOCB_RSP_IE	0x10	/* IPv4 checksum error */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 8ea72dc60f7..91191f761fb 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -1436,18 +1436,32 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
 		QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
 	}
-	if (ib_mac_rsp->flags1 & (IB_MAC_IOCB_RSP_IE | IB_MAC_IOCB_RSP_TE)) {
-		QPRINTK(qdev, RX_STATUS, ERR,
-			"Bad checksum for this %s packet.\n",
-			((ib_mac_rsp->
-			  flags2 & IB_MAC_IOCB_RSP_T) ? "TCP" : "UDP"));
-		skb->ip_summed = CHECKSUM_NONE;
-	} else if (qdev->rx_csum &&
-		   ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) ||
-		    ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
-		     !(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_NU)))) {
-		QPRINTK(qdev, RX_STATUS, DEBUG, "RX checksum done!\n");
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	skb->protocol = eth_type_trans(skb, ndev);
+	skb->ip_summed = CHECKSUM_NONE;
+
+	/* If rx checksum is on, and there are no
+	 * csum or frame errors.
+	 */
+	if (qdev->rx_csum &&
+		!(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) &&
+		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
+		/* TCP frame. */
+		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
+			QPRINTK(qdev, RX_STATUS, DEBUG,
+					"TCP checksum done!\n");
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
+				(ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
+		/* Unfragmented ipv4 UDP frame. */
+			struct iphdr *iph = (struct iphdr *) skb->data;
+			if (!(iph->frag_off &
+				cpu_to_be16(IP_MF|IP_OFFSET))) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				QPRINTK(qdev, RX_STATUS, DEBUG,
+						"TCP checksum done!\n");
+			}
+		}
 	}
 	qdev->stats.rx_packets++;
 	qdev->stats.rx_bytes += skb->len;
@@ -1927,6 +1941,9 @@ static int qlge_send(struct sk_buff *skb, struct net_device *ndev)
 
 	tx_ring = &qdev->tx_ring[tx_ring_idx];
 
+	if (skb_padto(skb, ETH_ZLEN))
+		return NETDEV_TX_OK;
+
 	if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
 		QPRINTK(qdev, TX_QUEUED, INFO,
 			"%s: shutting down tx queue %d du to lack of resources.\n",
@@ -2970,9 +2987,9 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 	mask = value << 16;
 	ql_write32(qdev, SYS, mask | value);
 
-	/* Set the default queue. */
-	value = NIC_RCV_CFG_DFQ;
-	mask = NIC_RCV_CFG_DFQ_MASK;
+	/* Set the default queue, and VLAN behavior. */
+	value = NIC_RCV_CFG_DFQ | NIC_RCV_CFG_RV;
+	mask = NIC_RCV_CFG_DFQ_MASK | (NIC_RCV_CFG_RV << 16);
 	ql_write32(qdev, NIC_RCV_CFG, (mask | value));
 
 	/* Set the MPI interrupt to enabled. */
@@ -3149,6 +3166,11 @@ static int ql_adapter_down(struct ql_adapter *qdev)
 
 	ql_tx_ring_clean(qdev);
 
+	/* Call netif_napi_del() from common point.
+	 */
+	for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
+		netif_napi_del(&qdev->rx_ring[i].napi);
+
 	spin_lock(&qdev->hw_lock);
 	status = ql_adapter_reset(qdev);
 	if (status)
@@ -3853,7 +3875,7 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *ndev = pci_get_drvdata(pdev);
 	struct ql_adapter *qdev = netdev_priv(ndev);
-	int err, i;
+	int err;
 
 	netif_device_detach(ndev);
 
@@ -3863,9 +3885,6 @@ static int qlge_suspend(struct pci_dev *pdev, pm_message_t state)
 			return err;
 	}
 
-	for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
-		netif_napi_del(&qdev->rx_ring[i].napi);
-
 	err = pci_save_state(pdev);
 	if (err)
 		return err;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b3473401c83..43fedb9eced 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -81,9 +81,9 @@ static const int multicast_filter_limit = 32;
 #define RTL8169_TX_TIMEOUT	(6*HZ)
 #define RTL8169_PHY_TIMEOUT	(10*HZ)
 
-#define RTL_EEPROM_SIG		0x8129
+#define RTL_EEPROM_SIG		cpu_to_le32(0x8129)
+#define RTL_EEPROM_SIG_MASK	cpu_to_le32(0xffff)
 #define RTL_EEPROM_SIG_ADDR	0x0000
-#define RTL_EEPROM_MAC_ADDR	0x0007
 
 /* write/read MMIO register */
 #define RTL_W8(reg, val8)	writeb ((val8), ioaddr + (reg))
@@ -293,11 +293,6 @@ enum rtl_register_content {
 	/* Cfg9346Bits */
 	Cfg9346_Lock	= 0x00,
 	Cfg9346_Unlock	= 0xc0,
-	Cfg9346_Program	= 0x80,		/* Programming mode */
-	Cfg9346_EECS	= 0x08,		/* Chip select */
-	Cfg9346_EESK	= 0x04,		/* Serial data clock */
-	Cfg9346_EEDI	= 0x02,		/* Data input */
-	Cfg9346_EEDO	= 0x01,		/* Data output */
 
 	/* rx_mode_bits */
 	AcceptErr	= 0x20,
@@ -310,7 +305,6 @@ enum rtl_register_content {
 	/* RxConfigBits */
 	RxCfgFIFOShift	= 13,
 	RxCfgDMAShift	=  8,
-	RxCfg9356SEL	=  6, 		/* EEPROM type: 0 = 9346, 1 = 9356 */
 
 	/* TxConfigBits */
 	TxInterFrameGapShift = 24,
@@ -1969,108 +1963,6 @@ static const struct net_device_ops rtl8169_netdev_ops = {
 
 };
 
-/* Delay between EEPROM clock transitions. Force out buffered PCI writes. */
-#define RTL_EEPROM_DELAY()	RTL_R8(Cfg9346)
-#define RTL_EEPROM_READ_CMD	6
-
-/* read 16bit word stored in EEPROM. EEPROM is addressed by words. */
-static u16 rtl_eeprom_read(void __iomem *ioaddr, int addr)
-{
-	u16 result = 0;
-	int cmd, cmd_len, i;
-
-	/* check for EEPROM address size (in bits) */
-	if (RTL_R32(RxConfig) & (1 << RxCfg9356SEL)) {
-		/* EEPROM is 93C56 */
-		cmd_len = 3 + 8; /* 3 bits for command id and 8 for address */
-		cmd = (RTL_EEPROM_READ_CMD << 8) | (addr & 0xff);
-	} else {
-		/* EEPROM is 93C46 */
-		cmd_len = 3 + 6; /* 3 bits for command id and 6 for address */
-		cmd = (RTL_EEPROM_READ_CMD << 6) | (addr & 0x3f);
-	}
-
-	/* enter programming mode */
-	RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
-	RTL_EEPROM_DELAY();
-
-	/* write command and requested address */
-	while (cmd_len--) {
-		u8 x = Cfg9346_Program | Cfg9346_EECS;
-
-		x |= (cmd & (1 << cmd_len)) ? Cfg9346_EEDI : 0;
-
-		/* write a bit */
-		RTL_W8(Cfg9346, x);
-		RTL_EEPROM_DELAY();
-
-		/* raise clock */
-		RTL_W8(Cfg9346, x | Cfg9346_EESK);
-		RTL_EEPROM_DELAY();
-	}
-
-	/* lower clock */
-	RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
-	RTL_EEPROM_DELAY();
-
-	/* read back 16bit value */
-	for (i = 16; i > 0; i--) {
-		/* raise clock */
-		RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS | Cfg9346_EESK);
-		RTL_EEPROM_DELAY();
-
-		result <<= 1;
-		result |= (RTL_R8(Cfg9346) & Cfg9346_EEDO) ? 1 : 0;
-
-		/* lower clock */
-		RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
-		RTL_EEPROM_DELAY();
-	}
-
-	RTL_W8(Cfg9346, Cfg9346_Program);
-	/* leave programming mode */
-	RTL_W8(Cfg9346, Cfg9346_Lock);
-
-	return result;
-}
-
-static void rtl_init_mac_address(struct rtl8169_private *tp,
-				 void __iomem *ioaddr)
-{
-	struct pci_dev *pdev = tp->pci_dev;
-	u16 x;
-	u8 mac[8];
-
-	/* read EEPROM signature */
-	x = rtl_eeprom_read(ioaddr, RTL_EEPROM_SIG_ADDR);
-
-	if (x != RTL_EEPROM_SIG) {
-		dev_info(&pdev->dev, "Missing EEPROM signature: %04x\n", x);
-		return;
-	}
-
-	/* read MAC address */
-	x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR);
-	mac[0] = x & 0xff;
-	mac[1] = x >> 8;
-	x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 1);
-	mac[2] = x & 0xff;
-	mac[3] = x >> 8;
-	x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 2);
-	mac[4] = x & 0xff;
-	mac[5] = x >> 8;
-
-	if (netif_msg_probe(tp)) {
-		DECLARE_MAC_BUF(buf);
-
-		dev_info(&pdev->dev, "MAC address found in EEPROM: %s\n",
-			 print_mac(buf, mac));
-	}
-
-	if (is_valid_ether_addr(mac))
-		rtl_rar_set(tp, mac);
-}
-
 static int __devinit
 rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -2249,8 +2141,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	tp->mmio_addr = ioaddr;
 
-	rtl_init_mac_address(tp, ioaddr);
-
 	/* Get MAC address */
 	for (i = 0; i < MAC_ADDR_LEN; i++)
 		dev->dev_addr[i] = RTL_R8(MAC0 + i);
@@ -3363,13 +3253,6 @@ static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		opts1 |= FirstFrag;
 	} else {
 		len = skb->len;
-
-		if (unlikely(len < ETH_ZLEN)) {
-			if (skb_padto(skb, ETH_ZLEN))
-				goto err_update_stats;
-			len = ETH_ZLEN;
-		}
-
 		opts1 |= FirstFrag | LastFrag;
 		tp->tx_skb[entry].skb = skb;
 	}
@@ -3407,7 +3290,6 @@ out:
 err_stop:
 	netif_stop_queue(dev);
 	ret = NETDEV_TX_BUSY;
-err_update_stats:
 	dev->stats.tx_dropped++;
 	goto out;
 }
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 7f8e514eb5e..7b1882765a0 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -687,6 +687,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 {
 	struct net_device *ndev = netdev;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
+	irqreturn_t ret = IRQ_NONE;
 	u32 ioaddr, boguscnt = RX_RING_SIZE;
 	u32 intr_status = 0;
 
@@ -696,7 +697,13 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	/* Get interrpt stat */
 	intr_status = ctrl_inl(ioaddr + EESR);
 	/* Clear interrupt */
-	ctrl_outl(intr_status, ioaddr + EESR);
+	if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
+			EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
+			TX_CHECK | EESR_ERR_CHECK)) {
+		ctrl_outl(intr_status, ioaddr + EESR);
+		ret = IRQ_HANDLED;
+	} else
+		goto other_irq;
 
 	if (intr_status & (EESR_FRC | /* Frame recv*/
 			EESR_RMAF | /* Multi cast address recv*/
@@ -723,9 +730,10 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 		       ndev->name, intr_status);
 	}
 
+other_irq:
 	spin_unlock(&mdp->lock);
 
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static void sh_eth_timer(unsigned long data)
@@ -844,7 +852,13 @@ static int sh_eth_open(struct net_device *ndev)
 	int ret = 0;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
-	ret = request_irq(ndev->irq, &sh_eth_interrupt, 0, ndev->name, ndev);
+	ret = request_irq(ndev->irq, &sh_eth_interrupt,
+#if defined(CONFIG_CPU_SUBTYPE_SH7763) || defined(CONFIG_CPU_SUBTYPE_SH7764)
+				IRQF_SHARED,
+#else
+				0,
+#endif
+				ndev->name, ndev);
 	if (ret) {
 		printk(KERN_ERR "Can not assign IRQ number to %s\n", CARDNAME);
 		return ret;
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 73bc7181cc1..1537e13e623 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -43,8 +43,8 @@
 
 #define SH7763_SKB_ALIGN 32
 /* Chip Base Address */
-# define SH_TSU_ADDR  0xFFE01800
-# define ARSTR 		  0xFFE01800
+# define SH_TSU_ADDR	0xFEE01800
+# define ARSTR			SH_TSU_ADDR
 
 /* Chip Registers */
 /* E-DMAC */
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 870b4c33f10..8140f7cb4d8 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -42,6 +42,16 @@
   #define SMC_USE_16BIT		0
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+#elif defined(CONFIG_ARCH_OMAP34XX)
+  #define SMC_USE_16BIT		0
+  #define SMC_USE_32BIT		1
+  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+  #define SMC_MEM_RESERVED	1
+#elif defined(CONFIG_ARCH_OMAP24XX)
+  #define SMC_USE_16BIT		0
+  #define SMC_USE_32BIT		1
+  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+  #define SMC_MEM_RESERVED	1
 #else
 /*
  * Default configuration
@@ -226,8 +236,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
  * Use a DMA for RX and TX packets.
  */
 #include <linux/dma-mapping.h>
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 
 static dma_addr_t rx_dmabuf, tx_dmabuf;
 static int rx_dmalen, tx_dmalen;
@@ -675,6 +684,7 @@ smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr,
 #define CHIP_9116	0x0116
 #define CHIP_9117	0x0117
 #define CHIP_9118	0x0118
+#define CHIP_9211	0x9211
 #define CHIP_9215	0x115A
 #define CHIP_9217	0x117A
 #define CHIP_9218	0x118A
@@ -689,6 +699,7 @@ static const struct chip_id chip_ids[] =  {
 	{ CHIP_9116, "LAN9116" },
 	{ CHIP_9117, "LAN9117" },
 	{ CHIP_9118, "LAN9118" },
+	{ CHIP_9211, "LAN9211" },
 	{ CHIP_9215, "LAN9215" },
 	{ CHIP_9217, "LAN9217" },
 	{ CHIP_9218, "LAN9218" },
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index c4ccd121bc9..1083e2c5dec 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -44,6 +44,7 @@
     defined(CONFIG_MACH_MAINSTONE) ||\
     defined(CONFIG_MACH_ZYLONITE) ||\
     defined(CONFIG_MACH_LITTLETON) ||\
+    defined(CONFIG_MACH_ZYLONITE2) ||\
     defined(CONFIG_ARCH_VIPER)
 
 #include <asm/mach-types.h>
@@ -494,8 +495,6 @@ struct smc_local {
  */
 #include <linux/dma-mapping.h>
 #include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 
 #ifdef SMC_insl
 #undef SMC_insl
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 9a78daec2fe..d1590ac55e4 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1225,6 +1225,10 @@ static int smsc911x_open(struct net_device *dev)
 	dev_info(&dev->dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
 		 (unsigned long)pdata->ioaddr, dev->irq);
 
+	/* Reset the last known duplex and carrier */
+	pdata->last_duplex = -1;
+	pdata->last_carrier = -1;
+
 	/* Bring the PHY up */
 	phy_start(pdata->phy_dev);
 
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 8d64b1da046..c9c7650826c 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1229,7 +1229,7 @@ static void gem_reset(struct gem *gp)
 			break;
 	} while (val & (GREG_SWRST_TXRST | GREG_SWRST_RXRST));
 
-	if (limit <= 0)
+	if (limit < 0)
 		printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
 
 	if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
@@ -2998,8 +2998,11 @@ static const struct net_device_ops gem_netdev_ops = {
 	.ndo_do_ioctl		= gem_ioctl,
 	.ndo_tx_timeout		= gem_tx_timeout,
 	.ndo_change_mtu		= gem_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address    = gem_set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller    = gem_poll_controller,
+#endif
 };
 
 static int __devinit gem_init_one(struct pci_dev *pdev,
@@ -3161,10 +3164,6 @@ static int __devinit gem_init_one(struct pci_dev *pdev,
 	dev->watchdog_timeo = 5 * HZ;
 	dev->irq = pdev->irq;
 	dev->dma = 0;
-	dev->set_mac_address = gem_set_mac_address;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = gem_poll_controller;
-#endif
 
 	/* Set that now, in case PM kicks in now */
 	pci_set_drvdata(pdev, dev);
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index d4fb4acdbeb..4e9bd380a5c 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2649,8 +2649,6 @@ static int __devinit happy_meal_sbus_probe_one(struct of_device *op, int is_qfe)
 	int err = -ENODEV;
 
 	sbus_dp = to_of_device(op->dev.parent)->node;
-	if (is_qfe)
-		sbus_dp = to_of_device(op->dev.parent->parent)->node;
 
 	/* We can match PCI devices too, do not accept those here. */
 	if (strcmp(sbus_dp->name, "sbus"))
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b080f9493d8..dabdf59f801 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1473,7 +1473,8 @@ static void tg3_phy_toggle_apd(struct tg3 *tp, bool enable)
 {
 	u32 reg;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		return;
 
 	reg = MII_TG3_MISC_SHDW_WREN |
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index 5f601773c26..e2150b3c83d 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -121,11 +121,6 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic
 		goto err_out_trdev;
 	}
 
-	ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
-			  dev->name, dev);
-	if (ret)
-		goto err_out_region;
-
 	dev->base_addr	= pci_ioaddr;
 	dev->irq 	= pci_irq_line;
 	dev->dma	= 0;
@@ -142,7 +137,7 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic
 	ret = tmsdev_init(dev, &pdev->dev);
 	if (ret) {
 		printk("%s: unable to get memory for dev->priv.\n", dev->name);
-		goto err_out_irq;
+		goto err_out_region;
 	}
 
 	tp = netdev_priv(dev);
@@ -157,6 +152,11 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic
 
 	tp->tmspriv = cardinfo;
 
+	ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (ret)
+		goto err_out_tmsdev;
+
 	dev->open = tms380tr_open;
 	dev->stop = tms380tr_close;
 	pci_set_drvdata(pdev, dev);
@@ -164,15 +164,15 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic
 
 	ret = register_netdev(dev);
 	if (ret)
-		goto err_out_tmsdev;
+		goto err_out_irq;
 	
 	return 0;
 
+err_out_irq:
+	free_irq(pdev->irq, dev);
 err_out_tmsdev:
 	pci_set_drvdata(pdev, NULL);
 	tmsdev_term(dev);
-err_out_irq:
-	free_irq(pdev->irq, dev);
 err_out_region:
 	release_region(pci_ioaddr, TMS_PCI_IO_EXTENT);
 err_out_trdev:
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index bee75fa87a9..2abb5d3becc 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -255,6 +255,7 @@ const char tulip_media_cap[32] =
 
 static void tulip_tx_timeout(struct net_device *dev);
 static void tulip_init_ring(struct net_device *dev);
+static void tulip_free_ring(struct net_device *dev);
 static int tulip_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static int tulip_open(struct net_device *dev);
 static int tulip_close(struct net_device *dev);
@@ -502,16 +503,21 @@ tulip_open(struct net_device *dev)
 {
 	int retval;
 
-	if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev)))
-		return retval;
-
 	tulip_init_ring (dev);
 
+	retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev);
+	if (retval)
+		goto free_ring;
+
 	tulip_up (dev);
 
 	netif_start_queue (dev);
 
 	return 0;
+
+free_ring:
+	tulip_free_ring (dev);
+	return retval;
 }
 
 
@@ -768,23 +774,11 @@ static void tulip_down (struct net_device *dev)
 	tulip_set_power_state (tp, 0, 1);
 }
 
-
-static int tulip_close (struct net_device *dev)
+static void tulip_free_ring (struct net_device *dev)
 {
 	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
 	int i;
 
-	netif_stop_queue (dev);
-
-	tulip_down (dev);
-
-	if (tulip_debug > 1)
-		printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
-			dev->name, ioread32 (ioaddr + CSR5));
-
-	free_irq (dev->irq, dev);
-
 	/* Free all the skbuffs in the Rx queue. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
 		struct sk_buff *skb = tp->rx_buffers[i].skb;
@@ -803,6 +797,7 @@ static int tulip_close (struct net_device *dev)
 			dev_kfree_skb (skb);
 		}
 	}
+
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		struct sk_buff *skb = tp->tx_buffers[i].skb;
 
@@ -814,6 +809,24 @@ static int tulip_close (struct net_device *dev)
 		tp->tx_buffers[i].skb = NULL;
 		tp->tx_buffers[i].mapping = 0;
 	}
+}
+
+static int tulip_close (struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+
+	netif_stop_queue (dev);
+
+	tulip_down (dev);
+
+	if (tulip_debug > 1)
+		printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
+			dev->name, ioread32 (ioaddr + CSR5));
+
+	free_irq (dev->irq, dev);
+
+	tulip_free_ring (dev);
 
 	return 0;
 }
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index e87986867ba..1f61e42c641 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1536,32 +1536,15 @@ static void adjust_link(struct net_device *dev)
 static int init_phy(struct net_device *dev)
 {
 	struct ucc_geth_private *priv = netdev_priv(dev);
-	struct device_node *np = priv->node;
-	struct device_node *phy, *mdio;
-	const phandle *ph;
-	char bus_name[MII_BUS_ID_SIZE];
-	const unsigned int *id;
+	struct ucc_geth_info *ug_info = priv->ug_info;
 	struct phy_device *phydev;
-	char phy_id[BUS_ID_SIZE];
 
 	priv->oldlink = 0;
 	priv->oldspeed = 0;
 	priv->oldduplex = -1;
 
-	ph = of_get_property(np, "phy-handle", NULL);
-	phy = of_find_node_by_phandle(*ph);
-	mdio = of_get_parent(phy);
-
-	id = of_get_property(phy, "reg", NULL);
-
-	of_node_put(phy);
-	of_node_put(mdio);
-
-	uec_mdio_bus_name(bus_name, mdio);
-	snprintf(phy_id, sizeof(phy_id), "%s:%02x",
-                                bus_name, *id);
-
-	phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
+	phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
+			     priv->phy_interface);
 
 	if (IS_ERR(phydev)) {
 		printk("%s: Could not attach to PHY\n", dev->name);
@@ -3629,10 +3612,12 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
 	fixed_link = of_get_property(np, "fixed-link", NULL);
 	if (fixed_link) {
-		snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "0");
-		ug_info->phy_address = fixed_link[0];
+		snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
+			 PHY_ID_FMT, "0", fixed_link[0]);
 		phy = NULL;
 	} else {
+		char bus_name[MII_BUS_ID_SIZE];
+
 		ph = of_get_property(np, "phy-handle", NULL);
 		phy = of_find_node_by_phandle(*ph);
 
@@ -3643,7 +3628,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		prop = of_get_property(phy, "reg", NULL);
 		if (prop == NULL)
 			return -1;
-		ug_info->phy_address = *prop;
 
 		/* Set the bus id */
 		mdio = of_get_parent(phy);
@@ -3657,7 +3641,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		if (err)
 			return -1;
 
-		snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x", res.start);
+		uec_mdio_bus_name(bus_name, mdio);
+		snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
+			"%s:%02x", bus_name, *prop);
 	}
 
 	/* get the phy interface type, or default to MII */
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 16cbe42ba43..611bdef2402 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1091,8 +1091,7 @@ struct ucc_geth_info {
 	u32 eventRegMask;
 	u16 pausePeriod;
 	u16 extensionField;
-	u8 phy_address;
-	char mdio_bus[MII_BUS_ID_SIZE];
+	char phy_bus_id[BUS_ID_SIZE];
 	u8 weightfactor[NUM_TX_QUEUES];
 	u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
 	u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 54635911305..0ada4edd56e 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -107,7 +107,7 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 static int uec_mdio_reset(struct mii_bus *bus)
 {
 	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
-	unsigned int timeout = PHY_INIT_TIMEOUT;
+	int timeout = PHY_INIT_TIMEOUT;
 
 	mutex_lock(&bus->mdio_lock);
 
@@ -123,7 +123,7 @@ static int uec_mdio_reset(struct mii_bus *bus)
 
 	mutex_unlock(&bus->mdio_lock);
 
-	if (timeout <= 0) {
+	if (timeout < 0) {
 		printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
 		return -EBUSY;
 	}
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 5b67bbf1987..81682c6defa 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -635,6 +635,10 @@ static const struct usb_device_id products[] = {
 	USB_DEVICE(0x0a47, 0x9601),	/* Hirose USB-100 */
 	.driver_info = (unsigned long)&dm9601_info,
 	 },
+	{
+	USB_DEVICE(0x0fe6, 0x8101),	/* DM9601 USB to Fast Ethernet Adapter */
+	.driver_info = (unsigned long)&dm9601_info,
+	 },
 	{},			// END
 };
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index c5691fdb707..fb53ef872df 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1838,17 +1838,19 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_
 {
 	struct sk_buff *skb = tdinfo->skb;
 	int i;
+	int pktlen;
 
 	/*
 	 *	Don't unmap the pre-allocated tx_bufs
 	 */
 	if (tdinfo->skb_dma) {
 
+		pktlen = (skb->len > ETH_ZLEN ? : ETH_ZLEN);
 		for (i = 0; i < tdinfo->nskb_dma; i++) {
 #ifdef VELOCITY_ZERO_COPY_SUPPORT
 			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], le16_to_cpu(td->tdesc1.len), PCI_DMA_TODEVICE);
 #else
-			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], skb->len, PCI_DMA_TODEVICE);
+			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
 #endif
 			tdinfo->skb_dma[i] = 0;
 		}
@@ -2080,17 +2082,14 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct tx_desc *td_ptr;
 	struct velocity_td_info *tdinfo;
 	unsigned long flags;
-	int pktlen = skb->len;
+	int pktlen;
 	__le16 len;
 	int index;
 
 
-
-	if (skb->len < ETH_ZLEN) {
-		if (skb_padto(skb, ETH_ZLEN))
-			goto out;
-		pktlen = ETH_ZLEN;
-	}
+	if (skb_padto(skb, ETH_ZLEN))
+		goto out;
+	pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
 
 	len = cpu_to_le16(pktlen);
 
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index c68808336c8..e67d16c2e5f 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -612,6 +612,7 @@ static struct ethtool_ops virtnet_ethtool_ops = {
 	.set_tx_csum = virtnet_set_tx_csum,
 	.set_sg = ethtool_op_set_sg,
 	.set_tso = ethtool_op_set_tso,
+	.get_link = ethtool_op_get_link,
 };
 
 #define MIN_MTU 68
@@ -739,6 +740,8 @@ static int virtnet_probe(struct virtio_device *vdev)
 		goto unregister;
 	}
 
+	netif_carrier_on(dev);
+
 	pr_debug("virtnet: registered device %s\n", dev->name);
 	return 0;
 
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h
index d2781350295..6650f609ece 100644
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -587,8 +587,8 @@ struct ath9k_country_entry {
 	u8 iso[3];
 };
 
-#define REG_WRITE(_ah, _reg, _val) iowrite32(_val, _ah->ah_sh + _reg)
-#define REG_READ(_ah, _reg) ioread32(_ah->ah_sh + _reg)
+#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
+#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
 
 #define SM(_v, _f)  (((_v) << _f##_S) & _f)
 #define MS(_v, _f)  (((_v) & _f) >> _f##_S)
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 4ca2aed236e..139566cbbf6 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -701,6 +701,7 @@ struct ath_softc {
 	struct ath_hal *sc_ah;
 	void __iomem *mem;
 	spinlock_t sc_resetlock;
+	spinlock_t sc_serial_rw;
 	struct mutex mutex;
 
 	u8 sc_curbssid[ETH_ALEN];
@@ -751,4 +752,36 @@ int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
 int ath_cabq_update(struct ath_softc *);
 
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+static inline void ath9k_iowrite32(struct ath_hal *ah, u32 reg_offset, u32 val)
+{
+	if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+		iowrite32(val, ah->ah_sc->mem + reg_offset);
+		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+	} else
+		iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+static inline unsigned int ath9k_ioread32(struct ath_hal *ah, u32 reg_offset)
+{
+	u32 val;
+	if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+		val = ioread32(ah->ah_sc->mem + reg_offset);
+		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+	} else
+		val = ioread32(ah->ah_sc->mem + reg_offset);
+	return val;
+}
+
 #endif /* CORE_H */
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index 34474edefc9..c38a00bbce6 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -437,6 +437,25 @@ static void ath9k_hw_set_defaults(struct ath_hal *ah)
 	}
 
 	ah->ah_config.intr_mitigation = 1;
+
+	/*
+	 * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+	 * _and_ if on non-uniprocessor systems (Multiprocessor/HT).
+	 * This means we use it for all AR5416 devices, and the few
+	 * minor PCI AR9280 devices out there.
+	 *
+	 * Serialization is required because these devices do not handle
+	 * well the case of two concurrent reads/writes due to the latency
+	 * involved. During one read/write another read/write can be issued
+	 * on another CPU while the previous read/write may still be working
+	 * on our hardware, if we hit this case the hardware poops in a loop.
+	 * We prevent this by serializing reads and writes.
+	 *
+	 * This issue is not present on PCI-Express devices or pre-AR5416
+	 * devices (legacy, 802.11abg).
+	 */
+	if (num_possible_cpus() > 1)
+		ah->ah_config.serialize_regmode = SER_REG_MODE_AUTO;
 }
 
 static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid,
@@ -668,7 +687,8 @@ static struct ath_hal *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 	}
 
 	if (ah->ah_config.serialize_regmode == SER_REG_MODE_AUTO) {
-		if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) {
+		if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI ||
+		    (AR_SREV_9280(ah) && !ah->ah_isPciExpress)) {
 			ah->ah_config.serialize_regmode =
 				SER_REG_MODE_ON;
 		} else {
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 0e80990d8e8..3c04044a60b 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1336,6 +1336,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 		printk(KERN_ERR "Unable to create debugfs files\n");
 
 	spin_lock_init(&sc->sc_resetlock);
+	spin_lock_init(&sc->sc_serial_rw);
 	mutex_init(&sc->mutex);
 	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
 	tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 36bafeb353c..129e2d330ab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3868,7 +3868,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	err = iwl_eeprom_check_version(priv);
 	if (err)
-		goto out_iounmap;
+		goto out_free_eeprom;
 
 	/* extract MAC Address */
 	iwl_eeprom_get_mac(priv, priv->mac_addr);
@@ -3945,6 +3945,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return 0;
 
  out_remove_sysfs:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
 	sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
  out_uninit_drv:
 	iwl_uninit_drv(priv);
@@ -3953,8 +3955,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
  out_iounmap:
 	pci_iounmap(pdev, priv->hw_base);
  out_pci_release_regions:
-	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
+	pci_release_regions(pdev);
  out_pci_disable_device:
 	pci_disable_device(pdev);
  out_ieee80211_free_hw:
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 93be74a1f13..57dd34e256d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -7911,7 +7911,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 				CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 	if (err < 0) {
 		IWL_DEBUG_INFO("Failed to init the card\n");
-		goto out_remove_sysfs;
+		goto out_iounmap;
 	}
 
 	/***********************
@@ -7921,7 +7921,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	err = iwl3945_eeprom_init(priv);
 	if (err) {
 		IWL_ERROR("Unable to init EEPROM\n");
-		goto out_remove_sysfs;
+		goto out_iounmap;
 	}
 	/* MAC Address location in EEPROM same for 3945/4965 */
 	get_eeprom_mac(priv, priv->mac_addr);
@@ -7975,7 +7975,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	err = iwl3945_init_channel_map(priv);
 	if (err) {
 		IWL_ERROR("initializing regulatory failed: %d\n", err);
-		goto out_release_irq;
+		goto out_unset_hw_setting;
 	}
 
 	err = iwl3945_init_geos(priv);
@@ -8045,25 +8045,22 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	return 0;
 
  out_remove_sysfs:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
 	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
  out_free_geos:
 	iwl3945_free_geos(priv);
  out_free_channel_map:
 	iwl3945_free_channel_map(priv);
-
-
- out_release_irq:
-	destroy_workqueue(priv->workqueue);
-	priv->workqueue = NULL;
+ out_unset_hw_setting:
 	iwl3945_unset_hw_setting(priv);
-
  out_iounmap:
 	pci_iounmap(pdev, priv->hw_base);
  out_pci_release_regions:
 	pci_release_regions(pdev);
  out_pci_disable_device:
-	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
  out_ieee80211_free_hw:
 	ieee80211_free_hw(priv->hw);
  out:
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 34561e6e816..f170106bf0a 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -710,10 +710,11 @@ static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev,
 					   __le32 req_id)
 {
 	struct p54_common *priv = dev->priv;
-	struct sk_buff *entry = priv->tx_queue.next;
+	struct sk_buff *entry;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
+	entry = priv->tx_queue.next;
 	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
 
@@ -732,7 +733,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct p54_common *priv = dev->priv;
 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 	struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
-	struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
+	struct sk_buff *entry;
 	u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
 	struct memrecord *range = NULL;
 	u32 freed = 0;
@@ -741,6 +742,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	int count, idx;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
+	entry = (struct sk_buff *) priv->tx_queue.next;
 	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
@@ -976,7 +978,7 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 			       struct p54_hdr *data, u32 len)
 {
 	struct p54_common *priv = dev->priv;
-	struct sk_buff *entry = priv->tx_queue.next;
+	struct sk_buff *entry;
 	struct sk_buff *target_skb = NULL;
 	struct ieee80211_tx_info *info;
 	struct memrecord *range;
@@ -1014,6 +1016,7 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 		}
 	}
 
+	entry = priv->tx_queue.next;
 	while (left--) {
 		u32 hole_size;
 		info = IEEE80211_SKB_CB(entry);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index af6b5847be5..3e2ac2bbb12 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1952,6 +1952,8 @@ static struct usb_device_id rt2500usb_device_table[] = {
 	{ USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* CNet */
+	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Conceptronic */
 	{ USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* D-LINK */
@@ -1976,14 +1978,20 @@ static struct usb_device_id rt2500usb_device_table[] = {
 	{ USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* Sagem */
+	{ USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Siemens */
 	{ USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* SMC */
 	{ USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Spairon */
 	{ USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* SURECOM */
+	{ USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Trust */
 	{ USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* VTech */
+	{ USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Zinwell */
 	{ USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ 0, }
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 96a8d69f879..cefee1b26cd 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2281,7 +2281,18 @@ static const struct rt2x00_ops rt73usb_ops = {
  */
 static struct usb_device_id rt73usb_device_table[] = {
 	/* AboCom */
+	{ USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* AL */
+	{ USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Amigo */
+	{ USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* AMIT  */
+	{ USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Askey */
 	{ USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* ASUS */
@@ -2294,7 +2305,9 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Billionton */
 	{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Buffalo */
+	{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
@@ -2308,6 +2321,11 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Edimax */
+	{ USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* EnGenius */
+	{ USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Gemtek */
 	{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Gigabyte */
@@ -2328,22 +2346,34 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Ralink */
+	{ USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Qcom */
 	{ USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Samsung */
+	{ USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Senao */
 	{ USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Sitecom */
-	{ USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Surecom */
 	{ USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Philips */
+	{ USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Planex */
 	{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Zcom */
+	{ USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* ZyXEL */
+	{ USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ 0, }
 };
 
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index a611ad85798..847057d682b 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -575,13 +575,17 @@ static int zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 	r = fill_ctrlset(mac, skb);
 	if (r)
-		return r;
+		goto fail;
 
 	info->rate_driver_data[0] = hw;
 
 	r = zd_usb_tx(&mac->chip.usb, skb);
 	if (r)
-		return r;
+		goto fail;
+	return 0;
+
+fail:
+	dev_kfree_skb(skb);
 	return 0;
 }
 
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index d539d9df88e..bb5a1c9597c 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -479,7 +479,7 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr)
 	res = &dino_dev->hba.lmmio_space;
 	res->flags = IORESOURCE_MEM;
 	size = scnprintf(name, sizeof(name), "Dino LMMIO (%s)", 
-			 bus->bridge->bus_id);
+			 dev_name(bus->bridge));
 	res->name = kmalloc(size+1, GFP_KERNEL);
 	if(res->name)
 		strcpy((char *)res->name, name);
@@ -493,7 +493,7 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr)
 		struct list_head *ln, *tmp_ln;
 
 		printk(KERN_ERR "Dino: cannot attach bus %s\n",
-		       bus->bridge->bus_id);
+		       dev_name(bus->bridge));
 		/* kill the bus, we can't do anything with it */
 		list_for_each_safe(ln, tmp_ln, &bus->devices) {
 			struct pci_dev *dev = pci_dev_b(ln);
@@ -587,7 +587,7 @@ dino_fixup_bus(struct pci_bus *bus)
 			bus->resource[i+1] = &res[i];
 		}
 
-	} else if(bus->self) {
+	} else if (bus->parent) {
 		int i;
 
 		pci_read_bridge_bases(bus);
@@ -611,12 +611,12 @@ dino_fixup_bus(struct pci_bus *bus)
 			}
 					
 			DBG("DEBUG %s assigning %d [0x%lx,0x%lx]\n",
-			    bus->self->dev.bus_id, i,
+			    dev_name(&bus->self->dev), i,
 			    bus->self->resource[i].start,
 			    bus->self->resource[i].end);
 			pci_assign_resource(bus->self, i);
 			DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
-			    bus->self->dev.bus_id, i,
+			    dev_name(&bus->self->dev), i,
 			    bus->self->resource[i].start,
 			    bus->self->resource[i].end);
 		}
@@ -1026,7 +1026,8 @@ static int __init dino_probe(struct parisc_device *dev)
 		dino_current_bus = bus->subordinate + 1;
 		pci_bus_assign_resources(bus);
 	} else {
-		printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", dev->dev.bus_id, dino_current_bus);
+		printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
+		       dev_name(&dev->dev), dino_current_bus);
 		/* increment the bus number in case of duplicates */
 		dino_current_bus++;
 	}
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index e76db9e4d50..d3363291769 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -186,29 +186,34 @@ void gsc_asic_assign_irq(struct gsc_asic *asic, int local_irq, int *irqp)
 	*irqp = irq;
 }
 
-static struct device *next_device(struct klist_iter *i)
+struct gsc_fixup_struct {
+	void (*choose_irq)(struct parisc_device *, void *);
+	void *ctrl;
+};
+
+static int gsc_fixup_irqs_callback(struct device *dev, void *data)
 {
-	struct klist_node * n = klist_next(i);
-	return n ? container_of(n, struct device, knode_parent) : NULL;
+	struct parisc_device *padev = to_parisc_device(dev);
+	struct gsc_fixup_struct *gf = data;
+
+	/* work-around for 715/64 and others which have parent
+	   at path [5] and children at path [5/0/x] */
+	if (padev->id.hw_type == HPHW_FAULTY)
+		gsc_fixup_irqs(padev, gf->ctrl, gf->choose_irq);
+	gf->choose_irq(padev, gf->ctrl);
+
+	return 0;
 }
 
 void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
 			void (*choose_irq)(struct parisc_device *, void *))
 {
-	struct device *dev;
-	struct klist_iter i;
-
-	klist_iter_init(&parent->dev.klist_children, &i);
-	while ((dev = next_device(&i))) {
-		struct parisc_device *padev = to_parisc_device(dev);
-
-		/* work-around for 715/64 and others which have parent 
-		   at path [5] and children at path [5/0/x] */
-		if (padev->id.hw_type == HPHW_FAULTY)
-			return gsc_fixup_irqs(padev, ctrl, choose_irq);
-		choose_irq(padev, ctrl);
-	}
-	klist_iter_exit(&i);
+	struct gsc_fixup_struct data = {
+		.choose_irq	= choose_irq,
+		.ctrl		= ctrl,
+	};
+
+	device_for_each_child(&parent->dev, &data, gsc_fixup_irqs_callback);
 }
 
 int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic)
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 0797659ee01..501aaf1f253 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -487,7 +487,7 @@ iosapic_xlate_pin(struct iosapic_info *isi, struct pci_dev *pcidev)
 	}
 
 	/* Check if pcidev behind a PPB */
-	if (NULL != pcidev->bus->self) {
+	if (pcidev->bus->parent) {
 		/* Convert pcidev INTR_PIN into something we
 		** can lookup in the IRT.
 		*/
@@ -523,10 +523,9 @@ iosapic_xlate_pin(struct iosapic_info *isi, struct pci_dev *pcidev)
 #endif /* PCI_BRIDGE_FUNCS */
 
 		/*
-		** Locate the host slot the PPB nearest the Host bus
-		** adapter.
-		*/
-		while (NULL != p->parent->self)
+		 * Locate the host slot of the PPB.
+		 */
+		while (p->parent->parent)
 			p = p->parent;
 
 		intr_slot = PCI_SLOT(p->self->devfn);
@@ -709,11 +708,14 @@ static void iosapic_set_affinity_irq(unsigned int irq,
 	struct vector_info *vi = iosapic_get_vector(irq);
 	u32 d0, d1, dummy_d0;
 	unsigned long flags;
+	int dest_cpu;
 
-	if (cpu_check_affinity(irq, dest))
+	dest_cpu = cpu_check_affinity(irq, dest);
+	if (dest_cpu < 0)
 		return;
 
-	vi->txn_addr = txn_affinity_addr(irq, cpumask_first(dest));
+	irq_desc[irq].affinity = cpumask_of_cpu(dest_cpu);
+	vi->txn_addr = txn_affinity_addr(irq, dest_cpu);
 
 	spin_lock_irqsave(&iosapic_lock, flags);
 	/* d1 contains the destination CPU, so only want to set that
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index d8233de8c75..59fbbf12836 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -644,7 +644,7 @@ lba_fixup_bus(struct pci_bus *bus)
 	** Properly Setup MMIO resources for this bus.
 	** pci_alloc_primary_bus() mangles this.
 	*/
-	if (bus->self) {
+	if (bus->parent) {
 		int i;
 		/* PCI-PCI Bridge */
 		pci_read_bridge_bases(bus);
@@ -802,7 +802,7 @@ lba_fixup_bus(struct pci_bus *bus)
 ** Can't fixup here anyway....garr...
 */
 	if (fbb_enable) {
-		if (bus->self) {
+		if (bus->parent) {
 			u8 control;
 			/* enable on PPB */
 			(void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control);
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index a70cf16ee1a..e5999c4cedc 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1206,30 +1206,48 @@ sba_alloc_pdir(unsigned int pdir_size)
 	return (void *) pdir_base;
 }
 
-static struct device *next_device(struct klist_iter *i)
+struct ibase_data_struct {
+	struct ioc *ioc;
+	int ioc_num;
+};
+
+static int setup_ibase_imask_callback(struct device *dev, void *data)
 {
-        struct klist_node * n = klist_next(i);
-        return n ? container_of(n, struct device, knode_parent) : NULL;
+	/* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+        extern void lba_set_iregs(struct parisc_device *, u32, u32);
+	struct parisc_device *lba = to_parisc_device(dev);
+	struct ibase_data_struct *ibd = data;
+	int rope_num = (lba->hpa.start >> 13) & 0xf;
+	if (rope_num >> 3 == ibd->ioc_num)
+		lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask);
+	return 0;
 }
 
 /* setup Mercury or Elroy IBASE/IMASK registers. */
 static void 
 setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
 {
-	/* lba_set_iregs() is in drivers/parisc/lba_pci.c */
-        extern void lba_set_iregs(struct parisc_device *, u32, u32);
-	struct device *dev;
-	struct klist_iter i;
-
-	klist_iter_init(&sba->dev.klist_children, &i);
-	while ((dev = next_device(&i))) {
-		struct parisc_device *lba = to_parisc_device(dev);
-		int rope_num = (lba->hpa.start >> 13) & 0xf;
-		if (rope_num >> 3 == ioc_num)
-			lba_set_iregs(lba, ioc->ibase, ioc->imask);
-	}
-	klist_iter_exit(&i);
+	struct ibase_data_struct ibase_data = {
+		.ioc		= ioc,
+		.ioc_num	= ioc_num,
+	};
+
+	device_for_each_child(&sba->dev, &ibase_data,
+			      setup_ibase_imask_callback);
+}
+
+#ifdef SBA_AGP_SUPPORT
+static int
+sba_ioc_find_quicksilver(struct device *dev, void *data)
+{
+	int *agp_found = data;
+	struct parisc_device *lba = to_parisc_device(dev);
+
+	if (IS_QUICKSILVER(lba))
+		*agp_found = 1;
+	return 0;
 }
+#endif
 
 static void
 sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
@@ -1332,9 +1350,6 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
 	WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
 
 #ifdef SBA_AGP_SUPPORT
-{
-	struct klist_iter i;
-	struct device *dev = NULL;
 
 	/*
 	** If an AGP device is present, only use half of the IOV space
@@ -1344,13 +1359,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
 	** We program the next pdir index after we stop w/ a key for
 	** the GART code to handshake on.
 	*/
-	klist_iter_init(&sba->dev.klist_children, &i);
-	while ((dev = next_device(&i))) {
-		struct parisc_device *lba = to_parisc_device(dev);
-		if (IS_QUICKSILVER(lba))
-			agp_found = 1;
-	}
-	klist_iter_exit(&i);
+	device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver);
 
 	if (agp_found && sba_reserve_agpgart) {
 		printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n",
@@ -1358,9 +1367,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
 		ioc->pdir_size /= 2;
 		ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE;
 	}
-}
 #endif /*SBA_AGP_SUPPORT*/
-
 }
 
 static void
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index eacfb13998b..9aa4fe100a0 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -143,7 +143,7 @@ config HOTPLUG_PCI_SHPC
 
 config HOTPLUG_PCI_RPA
 	tristate "RPA PCI Hotplug driver"
-	depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+	depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE
 	help
 	  Say Y here if you have a RPA system that supports PCI Hotplug.
 
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index d0c97368586..38257500738 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -133,6 +133,9 @@ static void set_downstream_devices_error_reporting(struct pci_dev *dev,
 						   bool enable)
 {
 	set_device_error_reporting(dev, &enable);
+
+	if (!dev->subordinate)
+		return;
 	pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
 }
 
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 248b4db9155..5ea566e20b3 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -103,6 +103,7 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev,
 static void pcie_portdrv_remove (struct pci_dev *dev)
 {
 	pcie_port_device_remove(dev);
+	pci_disable_device(dev);
 	kfree(pci_get_drvdata(dev));
 }
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f20d55368ed..92b9efe9bca 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -23,6 +23,7 @@
 #include <linux/acpi.h>
 #include <linux/kallsyms.h>
 #include <linux/dmi.h>
+#include <linux/pci-aspm.h>
 #include "pci.h"
 
 int isa_dma_bridge_buggy;
@@ -1749,6 +1750,30 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
 
+/*
+ * The 82575 and 82598 may experience data corruption issues when transitioning
+ * out of L0S.  To prevent this we need to disable L0S on the pci-e link
+ */
+static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
+{
+	dev_info(&dev->dev, "Disabling L0s\n");
+	pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
+
 static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
 {
 	/* rev 1 ncr53c810 chips don't set the class at all which means
@@ -2097,7 +2122,7 @@ static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
 
 		if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
 					 &flags) == 0) {
-			dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
+			dev_info(&dev->dev, "Disabling HT MSI Mapping\n");
 
 			pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
 					      flags & ~HT_MSI_FLAGS_ENABLE);
@@ -2141,6 +2166,10 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
 	int pos;
 	int found;
 
+	/* Enabling HT MSI mapping on this device breaks MCP51 */
+	if (dev->device == 0x270)
+		return;
+
 	/* check if there is HT MSI cap or enabled on this device */
 	found = ht_check_msi_mapping(dev);
 
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index bb9ddb9532e..16f84aab6ab 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -28,7 +28,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 
@@ -39,6 +38,44 @@
 #include "soc_common.h"
 #include "pxa2xx_base.h"
 
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)			/* PCMCIA [0..1]                   */ \
+			(0x20000000 + (Nb) * PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA(Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)			/* PCMCIA Attribute [0..1]         */ \
+			(_PCMCIA(Nb) + 2 * PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)			/* PCMCIA Memory [0..1]            */ \
+			(_PCMCIA(Nb) + 3 * PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA(0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO(0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr(0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem(0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA(1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO(1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr(1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem(1)	/* PCMCIA 1 Memory                 */
+
 
 #define MCXX_SETUP_MASK     (0x7f)
 #define MCXX_ASST_MASK      (0x1f)
@@ -183,23 +220,67 @@ static void pxa2xx_configure_sockets(struct device *dev)
 		MECR &= ~MECR_NOS;
 }
 
+static const char *skt_names[] = {
+	"PCMCIA socket 0",
+	"PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+	(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
 int __pxa2xx_drv_pcmcia_probe(struct device *dev)
 {
-	int ret;
+	int i, ret;
 	struct pcmcia_low_level *ops;
+	struct skt_dev_info *sinfo;
+	struct soc_pcmcia_socket *skt;
 
 	if (!dev || !dev->platform_data)
 		return -ENODEV;
 
 	ops = (struct pcmcia_low_level *)dev->platform_data;
 
+	sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
+	if (!sinfo)
+		return -ENOMEM;
+
+	sinfo->nskt = ops->nr;
+
+	/* Initialize processor specific parameters */
+	for (i = 0; i < ops->nr; i++) {
+		skt = &sinfo->skt[i];
+
+		skt->nr		= i;
+		skt->irq	= NO_IRQ;
+
+		skt->res_skt.start	= _PCMCIA(skt->nr);
+		skt->res_skt.end	= _PCMCIA(skt->nr) + PCMCIASp - 1;
+		skt->res_skt.name	= skt_names[skt->nr];
+		skt->res_skt.flags	= IORESOURCE_MEM;
+
+		skt->res_io.start	= _PCMCIAIO(skt->nr);
+		skt->res_io.end		= _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+		skt->res_io.name	= "io";
+		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
+
+		skt->res_mem.start	= _PCMCIAMem(skt->nr);
+		skt->res_mem.end	= _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+		skt->res_mem.name	= "memory";
+		skt->res_mem.flags	= IORESOURCE_MEM;
+
+		skt->res_attr.start	= _PCMCIAAttr(skt->nr);
+		skt->res_attr.end	= _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+		skt->res_attr.name	= "attribute";
+		skt->res_attr.flags	= IORESOURCE_MEM;
+	}
+
 	/* Provide our PXA2xx specific timing routines. */
 	ops->set_timing  = pxa2xx_pcmcia_set_timing;
 #ifdef CONFIG_CPU_FREQ
 	ops->frequency_change = pxa2xx_pcmcia_frequency_change;
 #endif
 
-	ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr);
+	ret = soc_common_drv_pcmcia_probe(dev, ops, sinfo);
 
 	if (!ret)
 		pxa2xx_configure_sockets(dev);
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 7c8bcb47662..4ed64d8e95e 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -16,7 +16,6 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index 6c3aac37712..a7b943d01e3 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,7 +16,6 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
index f663a011bf4..d09c0dc4a31 100644
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ b/drivers/pcmcia/pxa2xx_e740.c
@@ -16,8 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/eseries-gpio.h>
 
 #include <asm/irq.h>
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 37ec55df086..6cbb1b1f7cf 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -24,7 +24,6 @@
 #include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
 #include <mach/lubbock.h>
 
 #include "sa1111_generic.h"
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 877001db491..1138551ba8f 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -21,11 +21,10 @@
 
 #include <pcmcia/ss.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 #include <mach/mainstone.h>
 
 #include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
index 36c7a0b324d..e0e5cb339b4 100644
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -22,8 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 #include <mach/trizeps4.h>
 
 #include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index dd10481be7b..17871360fe9 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -26,7 +26,6 @@
 
 #include <asm/irq.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/viper.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 6de4e1b41d6..0cc3748f375 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -37,9 +37,9 @@ static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
   
 	/* Disable CF bus: */
-	clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
-	clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
-	set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
 }
 
 static void
@@ -79,10 +79,7 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_
 		return -1;
 	}
 
-	if (state->flags & SS_RESET)
-		set_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
-	else
-		clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
+	assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
 
 	/* Silently ignore Vpp, output enable, speaker enable. */
 
@@ -92,9 +89,9 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_
 static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 {
 	/* Enable CF bus: */
-	set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
-	set_h3600_egpio(IPAQ_EGPIO_OPT_ON);
-	clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1);
+	assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0);
 
 	msleep(10);
 
@@ -112,10 +109,10 @@ static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 	 * socket 0 then socket 1.
 	 */
 	if (skt->nr == 1) {
-		clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
-		clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
+		assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
+		assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
 		/* hmm, does this suck power? */
-		set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+		assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
 	}
 }
 
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 6924d0ea8d3..401052a21ce 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -11,12 +11,12 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <pcmcia/ss.h>
 
 #include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 
 #include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 7cb1273202c..e15d59f2d8a 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -36,9 +36,9 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 
@@ -163,9 +163,55 @@ sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf)
 	return p - buf;
 }
 
+static const char *skt_names[] = {
+	"PCMCIA socket 0",
+	"PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+	(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
 int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
 			    int first, int nr)
 {
+	struct skt_dev_info *sinfo;
+	struct soc_pcmcia_socket *skt;
+	int i;
+
+	sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
+	if (!sinfo)
+		return -ENOMEM;
+
+	sinfo->nskt = nr;
+
+	/* Initiliaze processor specific parameters */
+	for (i = 0; i < nr; i++) {
+		skt = &sinfo->skt[i];
+
+		skt->nr		= first + i;
+		skt->irq	= NO_IRQ;
+
+		skt->res_skt.start	= _PCMCIA(skt->nr);
+		skt->res_skt.end	= _PCMCIA(skt->nr) + PCMCIASp - 1;
+		skt->res_skt.name	= skt_names[skt->nr];
+		skt->res_skt.flags	= IORESOURCE_MEM;
+
+		skt->res_io.start	= _PCMCIAIO(skt->nr);
+		skt->res_io.end		= _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+		skt->res_io.name	= "io";
+		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
+
+		skt->res_mem.start	= _PCMCIAMem(skt->nr);
+		skt->res_mem.end	= _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+		skt->res_mem.name	= "memory";
+		skt->res_mem.flags	= IORESOURCE_MEM;
+
+		skt->res_attr.start	= _PCMCIAAttr(skt->nr);
+		skt->res_attr.end	= _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+		skt->res_attr.name	= "attribute";
+		skt->res_attr.flags	= IORESOURCE_MEM;
+	}
+
 	/*
 	 * set default MECR calculation if the board specific
 	 * code did not specify one...
@@ -180,7 +226,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
 	ops->frequency_change = sa1100_pcmcia_frequency_change;
 #endif
 
-	return soc_common_drv_pcmcia_probe(dev, ops, first, nr);
+	return soc_common_drv_pcmcia_probe(dev, ops, sinfo);
 }
 EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
 
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index f49ac666615..163cf98e238 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -49,11 +49,6 @@
 
 #include "soc_common.h"
 
-/* FIXME: platform dependent resource declaration has to move out of this file */
-#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
-#endif
-
 #ifdef CONFIG_PCMCIA_DEBUG
 
 static int pc_debug;
@@ -581,19 +576,6 @@ EXPORT_SYMBOL(soc_pcmcia_enable_irqs);
 LIST_HEAD(soc_pcmcia_sockets);
 static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
 
-static const char *skt_names[] = {
-	"PCMCIA socket 0",
-	"PCMCIA socket 1",
-};
-
-struct skt_dev_info {
-	int nskt;
-	struct soc_pcmcia_socket skt[0];
-};
-
-#define SKT_DEV_INFO_SIZE(n) \
-	(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
-
 #ifdef CONFIG_CPU_FREQ
 static int
 soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
@@ -637,26 +619,18 @@ static int soc_pcmcia_cpufreq_register(void) { return 0; }
 static void soc_pcmcia_cpufreq_unregister(void) {}
 #endif
 
-int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
+int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
+				struct skt_dev_info *sinfo)
 {
-	struct skt_dev_info *sinfo;
 	struct soc_pcmcia_socket *skt;
 	int ret, i;
 
 	mutex_lock(&soc_pcmcia_sockets_lock);
 
-	sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
-	if (!sinfo) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	sinfo->nskt = nr;
-
 	/*
 	 * Initialise the per-socket structure.
 	 */
-	for (i = 0; i < nr; i++) {
+	for (i = 0; i < sinfo->nskt; i++) {
 		skt = &sinfo->skt[i];
 
 		skt->socket.ops = &soc_common_pcmcia_operations;
@@ -668,43 +642,21 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 		skt->poll_timer.data = (unsigned long)skt;
 		skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD;
 
-		skt->nr		= first + i;
-		skt->irq	= NO_IRQ;
 		skt->dev	= dev;
 		skt->ops	= ops;
 
-		skt->res_skt.start	= _PCMCIA(skt->nr);
-		skt->res_skt.end	= _PCMCIA(skt->nr) + PCMCIASp - 1;
-		skt->res_skt.name	= skt_names[skt->nr];
-		skt->res_skt.flags	= IORESOURCE_MEM;
-
 		ret = request_resource(&iomem_resource, &skt->res_skt);
 		if (ret)
 			goto out_err_1;
 
-		skt->res_io.start	= _PCMCIAIO(skt->nr);
-		skt->res_io.end		= _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
-		skt->res_io.name	= "io";
-		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
-
 		ret = request_resource(&skt->res_skt, &skt->res_io);
 		if (ret)
 			goto out_err_2;
 
-		skt->res_mem.start	= _PCMCIAMem(skt->nr);
-		skt->res_mem.end	= _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
-		skt->res_mem.name	= "memory";
-		skt->res_mem.flags	= IORESOURCE_MEM;
-
 		ret = request_resource(&skt->res_skt, &skt->res_mem);
 		if (ret)
 			goto out_err_3;
 
-		skt->res_attr.start	= _PCMCIAAttr(skt->nr);
-		skt->res_attr.end	= _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
-		skt->res_attr.name	= "attribute";
-		skt->res_attr.flags	= IORESOURCE_MEM;
-
 		ret = request_resource(&skt->res_skt, &skt->res_attr);
 		if (ret)
 			goto out_err_4;
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 38c67375f36..290e143839e 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -58,6 +58,11 @@ struct soc_pcmcia_socket {
 	struct list_head	node;
 };
 
+struct skt_dev_info {
+	int nskt;
+	struct soc_pcmcia_socket skt[0];
+};
+
 struct pcmcia_state {
   unsigned detect: 1,
             ready: 1,
@@ -132,7 +137,7 @@ extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_
 
 extern struct list_head soc_pcmcia_sockets;
 
-extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
+extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, struct skt_dev_info *sinfo);
 extern int soc_common_drv_pcmcia_remove(struct device *dev);
 
 
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b3866ad5022..3608081bc3e 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -15,8 +15,7 @@ menuconfig X86_PLATFORM_DEVICES
 if X86_PLATFORM_DEVICES
 
 config ACER_WMI
-	tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Acer WMI Laptop Extras"
 	depends on ACPI
 	depends on LEDS_CLASS
 	depends on NEW_LEDS
@@ -39,9 +38,9 @@ config ASUS_LAPTOP
 	tristate "Asus Laptop Extras (EXPERIMENTAL)"
 	depends on ACPI
 	depends on EXPERIMENTAL && !ACPI_ASUS
-	depends on LEDS_CLASS
-	depends on NEW_LEDS
-	depends on BACKLIGHT_CLASS_DEVICE
+	select LEDS_CLASS
+	select NEW_LEDS
+	select BACKLIGHT_CLASS_DEVICE
 	depends on INPUT
 	---help---
 	  This is the new Linux driver for Asus laptops. It may also support some
@@ -185,11 +184,11 @@ config SONYPI_COMPAT
 config THINKPAD_ACPI
 	tristate "ThinkPad ACPI Laptop Extras"
 	depends on ACPI
+	depends on INPUT
 	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
 	select NVRAM
-	select INPUT
 	select NEW_LEDS
 	select LEDS_CLASS
 	select NET
@@ -315,9 +314,8 @@ config EEEPC_LAPTOP
 
 
 config ACPI_WMI
-	tristate "WMI (EXPERIMENTAL)"
+	tristate "WMI"
 	depends on ACPI
-	depends on EXPERIMENTAL
 	help
 	  This driver adds support for the ACPI-WMI (Windows Management
 	  Instrumentation) mapper device (PNP0C14) found on some systems.
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 94c9f911824..a6a42e8c060 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1026,7 +1026,7 @@ static void acer_rfkill_exit(void)
 	kfree(wireless_rfkill->data);
 	rfkill_unregister(wireless_rfkill);
 	if (has_cap(ACER_CAP_BLUETOOTH)) {
-		kfree(wireless_rfkill->data);
+		kfree(bluetooth_rfkill->data);
 		rfkill_unregister(bluetooth_rfkill);
 	}
 	return;
@@ -1297,7 +1297,7 @@ static int __init acer_wmi_init(void)
 
 	set_quirks();
 
-	if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
+	if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
 		interface->capability &= ~ACER_CAP_BRIGHTNESS;
 		printk(ACER_INFO "Brightness must be controlled by "
 		       "generic video driver\n");
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 56af6cf385b..eeafc6c0160 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -815,6 +815,7 @@ static int asus_setkeycode(struct input_dev *dev, int scancode, int keycode)
 static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
 {
 	static struct key_entry *key;
+	u16 count;
 
 	/* TODO Find a better way to handle events count. */
 	if (!hotk)
@@ -832,9 +833,11 @@ static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
 		lcd_blank(FB_BLANK_POWERDOWN);
 	}
 
+	count = hotk->event_count[event % 128]++;
+	acpi_bus_generate_proc_event(hotk->device, event, count);
 	acpi_bus_generate_netlink_event(hotk->device->pnp.device_class,
 					dev_name(&hotk->device->dev), event,
-					hotk->event_count[event % 128]++);
+					count);
 
 	if (hotk->inputdev) {
 		key = asus_get_entry_by_scancode(event);
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 786ed8661cb..6f54fd1757c 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -557,13 +557,17 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
 {
 	static struct key_entry *key;
+	u16 count;
+
 	if (!ehotk)
 		return;
 	if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
 		notify_brn();
+	count = ehotk->event_count[event % 128]++;
+	acpi_bus_generate_proc_event(ehotk->device, event, count);
 	acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
 					dev_name(&ehotk->device->dev), event,
-					ehotk->event_count[event % 128]++);
+					count);
 	if (ehotk->inputdev) {
 		key = eepc_get_entry_by_scancode(event);
 		if (key) {
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index bcbc05107ba..d2433204a40 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -7532,7 +7532,7 @@ MODULE_ALIAS(TPACPI_DRVR_SHORTNAME);
  * if it is not there yet.
  */
 #define IBM_BIOS_MODULE_ALIAS(__type) \
-	MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW")
+	MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*")
 
 /* Non-ancient thinkpads */
 MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
@@ -7541,9 +7541,9 @@ MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");
 /* Ancient thinkpad BIOSes have to be identified by
  * BIOS type or model number, and there are far less
  * BIOS types than model numbers... */
-IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]");
-IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]");
-IBM_BIOS_MODULE_ALIAS("K[U,X-Z]");
+IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
+IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
+IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
 
 MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
 MODULE_DESCRIPTION(TPACPI_DESC);
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 8a8b377712c..2f269e117b8 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -708,7 +708,7 @@ static int __init acpi_wmi_add(struct acpi_device *device)
 
 static int __init acpi_wmi_init(void)
 {
-	acpi_status result;
+	int result;
 
 	INIT_LIST_HEAD(&wmi_blocks.list);
 
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 1d768928e0b..a52d4a11652 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -180,10 +180,13 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 	di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
 	di->empty_uAh *= 1000; /* convert to µAh */
 
-	/* From Maxim Application Note 131: remaining capacity =
-	 * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
-	di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
-			    (di->full_active_uAh - di->empty_uAh);
+	if (di->full_active_uAh == di->empty_uAh)
+		di->rem_capacity = 0;
+	else
+		/* From Maxim Application Note 131: remaining capacity =
+		 * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+		di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+				    (di->full_active_uAh - di->empty_uAh);
 
 	if (di->rem_capacity < 0)
 		di->rem_capacity = 0;
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index 45f12dcd371..e0263d2005e 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -12,6 +12,7 @@
 #include <linux/bcd.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 
 
 #define RTC_TIME_REG_OFFS	0
@@ -119,6 +120,16 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	/* make sure it is actually functional */
+	if (rtc_time == 0x01000000) {
+		ssleep(1);
+		rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
+		if (rtc_time == 0x01000000) {
+			dev_err(&pdev->dev, "internal RTC not ticking\n");
+			return -ENODEV;
+		}
+	}
+
 	platform_set_drvdata(pdev, pdata);
 	pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
 					 &mv_rtc_ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index d26a5f82aab..4f247e4dd3f 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,7 +35,8 @@
 #include <asm/irq.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-rtc.h>
+#include <mach/regs-ost.h>
 #endif
 
 #define RTC_DEF_DIVIDER		32768 - 1
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index f08e169ba1b..7e30e5f6e03 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -129,7 +129,7 @@ static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status)
 	bp->waiting = 1;
 	add_wait_queue(&bp->wq, &wait);
 	while (limit-- > 0) {
-		unsigned long val;
+		long val;
 
 		val = wait_event_interruptible_timeout(
 				bp->wq,
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index a9a9893a5f9..e6d1fc8c54f 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -38,9 +38,6 @@
 #include <linux/string.h>
 #include <linux/genhd.h>
 #include <linux/blkdev.h>
-
-#define MAJOR_NR	JSFD_MAJOR
-
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 29dc735e1a2..124f660a038 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -51,6 +51,7 @@ MODULE_AUTHOR("Thomas K. Dyas (tdyas@noc.rutgers.edu) and Eddie C. Dost  (ecd@sk
 MODULE_DESCRIPTION("OPENPROM Configuration Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION("1.0");
+MODULE_ALIAS_MISCDEV(SUN_OPENPROM_MINOR);
 
 /* Private data kept by the driver for each descriptor. */
 typedef struct openprom_private_data
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 68a64123af8..8ee01b90733 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -390,7 +390,8 @@ static struct scsi_host_template cumanascsi2_template = {
 	.eh_abort_handler		= fas216_eh_abort,
 	.can_queue			= 1,
 	.this_id			= 7,
-	.sg_tablesize			= SG_ALL,
+	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.cmd_per_lun			= 1,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.proc_name			= "cumanascsi2",
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index bb2477b3fb0..d8435132f46 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -508,7 +508,8 @@ static struct scsi_host_template eesox_template = {
 	.eh_abort_handler		= fas216_eh_abort,
 	.can_queue			= 1,
 	.this_id			= 7,
-	.sg_tablesize			= SG_ALL,
+	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.cmd_per_lun			= 1,
 	.use_clustering			= DISABLE_CLUSTERING,
 	.proc_name			= "eesox",
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index d9a546d1917..e2297b4c1b9 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -302,7 +302,8 @@ static struct scsi_host_template powertecscsi_template = {
 
 	.can_queue			= 8,
 	.this_id			= 7,
-	.sg_tablesize			= SG_ALL,
+	.sg_tablesize			= SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.dma_boundary			= IOMD_DMA_BOUNDARY,
 	.cmd_per_lun			= 2,
 	.use_clustering			= ENABLE_CLUSTERING,
 	.proc_name			= "powertec",
diff --git a/drivers/scsi/fcoe/fc_transport_fcoe.c b/drivers/scsi/fcoe/fc_transport_fcoe.c
index bf7fe6fc082..8862758006c 100644
--- a/drivers/scsi/fcoe/fc_transport_fcoe.c
+++ b/drivers/scsi/fcoe/fc_transport_fcoe.c
@@ -33,19 +33,19 @@ static LIST_HEAD(fcoe_transports);
 static DEFINE_MUTEX(fcoe_transports_lock);
 
 /**
- * fcoe_transport_default - returns ptr to the default transport fcoe_sw
- **/
+ * fcoe_transport_default() - Returns ptr to the default transport fcoe_sw
+ */
 struct fcoe_transport *fcoe_transport_default(void)
 {
 	return &fcoe_sw_transport;
 }
 
 /**
- * fcoe_transport_to_pcidev - get the pci dev from a netdev
+ * fcoe_transport_to_pcidev() - get the pci dev from a netdev
  * @netdev: the netdev that pci dev will be retrived from
  *
  * Returns: NULL or the corrsponding pci_dev
- **/
+ */
 struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev)
 {
 	if (!netdev->dev.parent)
@@ -54,18 +54,17 @@ struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev)
 }
 
 /**
- * fcoe_transport_device_lookup - find out netdev is managed by the
- * transport
- * assign a transport to a device
+ * fcoe_transport_device_lookup() - Lookup a transport
  * @netdev: the netdev the transport to be attached to
  *
  * This will look for existing offload driver, if not found, it falls back to
  * the default sw hba (fcoe_sw) as its fcoe transport.
  *
  * Returns: 0 for success
- **/
-static struct fcoe_transport_internal *fcoe_transport_device_lookup(
-	struct fcoe_transport *t, struct net_device *netdev)
+ */
+static struct fcoe_transport_internal *
+fcoe_transport_device_lookup(struct fcoe_transport *t,
+			     struct net_device *netdev)
 {
 	struct fcoe_transport_internal *ti;
 
@@ -81,14 +80,14 @@ static struct fcoe_transport_internal *fcoe_transport_device_lookup(
 	return NULL;
 }
 /**
- * fcoe_transport_device_add - assign a transport to a device
+ * fcoe_transport_device_add() - Assign a transport to a device
  * @netdev: the netdev the transport to be attached to
  *
  * This will look for existing offload driver, if not found, it falls back to
  * the default sw hba (fcoe_sw) as its fcoe transport.
  *
  * Returns: 0 for success
- **/
+ */
 static int fcoe_transport_device_add(struct fcoe_transport *t,
 				     struct net_device *netdev)
 {
@@ -123,14 +122,14 @@ static int fcoe_transport_device_add(struct fcoe_transport *t,
 }
 
 /**
- * fcoe_transport_device_remove - remove a device from its transport
+ * fcoe_transport_device_remove() - Remove a device from its transport
  * @netdev: the netdev the transport to be attached to
  *
- * this removes the device from the transport so the given transport will
+ * This removes the device from the transport so the given transport will
  * not manage this device any more
  *
  * Returns: 0 for success
- **/
+ */
 static int fcoe_transport_device_remove(struct fcoe_transport *t,
 					struct net_device *netdev)
 {
@@ -155,13 +154,13 @@ static int fcoe_transport_device_remove(struct fcoe_transport *t,
 }
 
 /**
- * fcoe_transport_device_remove_all - remove all from transport devlist
+ * fcoe_transport_device_remove_all() - Remove all from transport devlist
  *
- * this removes the device from the transport so the given transport will
+ * This removes the device from the transport so the given transport will
  * not manage this device any more
  *
  * Returns: 0 for success
- **/
+ */
 static void fcoe_transport_device_remove_all(struct fcoe_transport *t)
 {
 	struct fcoe_transport_internal *ti, *tmp;
@@ -175,18 +174,18 @@ static void fcoe_transport_device_remove_all(struct fcoe_transport *t)
 }
 
 /**
- * fcoe_transport_match - use the bus device match function to match the hw
- * @t: the fcoe transport
- * @netdev:
+ * fcoe_transport_match() - Use the bus device match function to match the hw
+ * @t: The fcoe transport to check
+ * @netdev: The netdev to match against
  *
- * This function is used to check if the givne transport wants to manage the
+ * This function is used to check if the given transport wants to manage the
  * input netdev. if the transports implements the match function, it will be
  * called, o.w. we just compare the pci vendor and device id.
  *
  * Returns: true for match up
- **/
+ */
 static bool fcoe_transport_match(struct fcoe_transport *t,
-				struct net_device *netdev)
+				 struct net_device *netdev)
 {
 	/* match transport by vendor and device id */
 	struct pci_dev *pci;
@@ -210,17 +209,17 @@ static bool fcoe_transport_match(struct fcoe_transport *t,
 }
 
 /**
- * fcoe_transport_lookup - check if the transport is already registered
+ * fcoe_transport_lookup() - Check if the transport is already registered
  * @t: the transport to be looked up
  *
  * This compares the parent device (pci) vendor and device id
  *
  * Returns: NULL if not found
  *
- * TODO - return default sw transport if no other transport is found
- **/
-static struct fcoe_transport *fcoe_transport_lookup(
-	struct net_device *netdev)
+ * TODO: return default sw transport if no other transport is found
+ */
+static struct fcoe_transport *
+fcoe_transport_lookup(struct net_device *netdev)
 {
 	struct fcoe_transport *t;
 
@@ -239,11 +238,11 @@ static struct fcoe_transport *fcoe_transport_lookup(
 }
 
 /**
- * fcoe_transport_register - adds a fcoe transport to the fcoe transports list
+ * fcoe_transport_register() - Adds a fcoe transport to the fcoe transports list
  * @t: ptr to the fcoe transport to be added
  *
  * Returns: 0 for success
- **/
+ */
 int fcoe_transport_register(struct fcoe_transport *t)
 {
 	struct fcoe_transport *tt;
@@ -259,9 +258,6 @@ int fcoe_transport_register(struct fcoe_transport *t)
 	list_add_tail(&t->list, &fcoe_transports);
 	mutex_unlock(&fcoe_transports_lock);
 
-	mutex_init(&t->devlock);
-	INIT_LIST_HEAD(&t->devlist);
-
 	printk(KERN_DEBUG "fcoe_transport_register:%s\n", t->name);
 
 	return 0;
@@ -269,11 +265,11 @@ int fcoe_transport_register(struct fcoe_transport *t)
 EXPORT_SYMBOL_GPL(fcoe_transport_register);
 
 /**
- * fcoe_transport_unregister - remove the tranport fro the fcoe transports list
+ * fcoe_transport_unregister() - Remove the tranport fro the fcoe transports list
  * @t: ptr to the fcoe transport to be removed
  *
  * Returns: 0 for success
- **/
+ */
 int fcoe_transport_unregister(struct fcoe_transport *t)
 {
 	struct fcoe_transport *tt, *tmp;
@@ -294,8 +290,8 @@ int fcoe_transport_unregister(struct fcoe_transport *t)
 }
 EXPORT_SYMBOL_GPL(fcoe_transport_unregister);
 
-/*
- * fcoe_load_transport_driver - load an offload driver by alias name
+/**
+ * fcoe_load_transport_driver() - Load an offload driver by alias name
  * @netdev: the target net device
  *
  * Requests for an offload driver module as the fcoe transport, if fails, it
@@ -307,7 +303,7 @@ EXPORT_SYMBOL_GPL(fcoe_transport_unregister);
  * 	3. pure hw fcoe hba may not have netdev
  *
  * Returns: 0 for success
- **/
+ */
 int fcoe_load_transport_driver(struct net_device *netdev)
 {
 	struct pci_dev *pci;
@@ -335,14 +331,14 @@ int fcoe_load_transport_driver(struct net_device *netdev)
 EXPORT_SYMBOL_GPL(fcoe_load_transport_driver);
 
 /**
- * fcoe_transport_attach - load transport to fcoe
+ * fcoe_transport_attach() - Load transport to fcoe
  * @netdev: the netdev the transport to be attached to
  *
  * This will look for existing offload driver, if not found, it falls back to
  * the default sw hba (fcoe_sw) as its fcoe transport.
  *
  * Returns: 0 for success
- **/
+ */
 int fcoe_transport_attach(struct net_device *netdev)
 {
 	struct fcoe_transport *t;
@@ -373,11 +369,11 @@ int fcoe_transport_attach(struct net_device *netdev)
 EXPORT_SYMBOL_GPL(fcoe_transport_attach);
 
 /**
- * fcoe_transport_release - unload transport from fcoe
+ * fcoe_transport_release() - Unload transport from fcoe
  * @netdev: the net device on which fcoe is to be released
  *
  * Returns: 0 for success
- **/
+ */
 int fcoe_transport_release(struct net_device *netdev)
 {
 	struct fcoe_transport *t;
@@ -410,12 +406,12 @@ int fcoe_transport_release(struct net_device *netdev)
 EXPORT_SYMBOL_GPL(fcoe_transport_release);
 
 /**
- * fcoe_transport_init - initializes fcoe transport layer
+ * fcoe_transport_init() - Initializes fcoe transport layer
  *
  * This prepares for the fcoe transport layer
  *
  * Returns: none
- **/
+ */
 int __init fcoe_transport_init(void)
 {
 	INIT_LIST_HEAD(&fcoe_transports);
@@ -424,12 +420,13 @@ int __init fcoe_transport_init(void)
 }
 
 /**
- * fcoe_transport_exit - cleans up the fcoe transport layer
+ * fcoe_transport_exit() - Cleans up the fcoe transport layer
+ *
  * This cleans up the fcoe transport layer. removing any transport on the list,
  * note that the transport destroy func is not called here.
  *
  * Returns: none
- **/
+ */
 int __exit fcoe_transport_exit(void)
 {
 	struct fcoe_transport *t, *tmp;
diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c
index dc4cd5e2576..da210eba194 100644
--- a/drivers/scsi/fcoe/fcoe_sw.c
+++ b/drivers/scsi/fcoe/fcoe_sw.c
@@ -104,19 +104,19 @@ static struct scsi_host_template fcoe_sw_shost_template = {
 	.max_sectors = 0xffff,
 };
 
-/*
- * fcoe_sw_lport_config - sets up the fc_lport
+/**
+ * fcoe_sw_lport_config() - sets up the fc_lport
  * @lp: ptr to the fc_lport
  * @shost: ptr to the parent scsi host
  *
  * Returns: 0 for success
- *
  */
 static int fcoe_sw_lport_config(struct fc_lport *lp)
 {
 	int i = 0;
 
-	lp->link_status = 0;
+	lp->link_up = 0;
+	lp->qfull = 0;
 	lp->max_retry_count = 3;
 	lp->e_d_tov = 2 * 1000;	/* FC-FS default */
 	lp->r_a_tov = 2 * 2 * 1000;
@@ -136,16 +136,14 @@ static int fcoe_sw_lport_config(struct fc_lport *lp)
 	return 0;
 }
 
-/*
- * fcoe_sw_netdev_config - sets up fcoe_softc for lport and network
- * related properties
+/**
+ * fcoe_sw_netdev_config() - Set up netdev for SW FCoE
  * @lp : ptr to the fc_lport
  * @netdev : ptr to the associated netdevice struct
  *
  * Must be called after fcoe_sw_lport_config() as it will use lport mutex
  *
  * Returns : 0 for success
- *
  */
 static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 {
@@ -181,9 +179,8 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	if (fc_set_mfs(lp, mfs))
 		return -EINVAL;
 
-	lp->link_status = ~FC_PAUSE & ~FC_LINK_UP;
 	if (!fcoe_link_ok(lp))
-		lp->link_status |= FC_LINK_UP;
+		lp->link_up = 1;
 
 	/* offload features support */
 	if (fc->real_dev->features & NETIF_F_SG)
@@ -191,6 +188,7 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 
 
 	skb_queue_head_init(&fc->fcoe_pending_queue);
+	fc->fcoe_pending_queue_active = 0;
 
 	/* setup Source Mac Address */
 	memcpy(fc->ctl_src_addr, fc->real_dev->dev_addr,
@@ -224,16 +222,15 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	return 0;
 }
 
-/*
- * fcoe_sw_shost_config - sets up fc_lport->host
+/**
+ * fcoe_sw_shost_config() - Sets up fc_lport->host
  * @lp : ptr to the fc_lport
  * @shost : ptr to the associated scsi host
  * @dev : device associated to scsi host
  *
- * Must be called after fcoe_sw_lport_config) and fcoe_sw_netdev_config()
+ * Must be called after fcoe_sw_lport_config() and fcoe_sw_netdev_config()
  *
  * Returns : 0 for success
- *
  */
 static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
 				struct device *dev)
@@ -261,8 +258,8 @@ static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
 	return 0;
 }
 
-/*
- * fcoe_sw_em_config - allocates em for this lport
+/**
+ * fcoe_sw_em_config() - allocates em for this lport
  * @lp: the port that em is to allocated for
  *
  * Returns : 0 on success
@@ -279,8 +276,8 @@ static inline int fcoe_sw_em_config(struct fc_lport *lp)
 	return 0;
 }
 
-/*
- * fcoe_sw_destroy - FCoE software HBA tear-down function
+/**
+ * fcoe_sw_destroy() - FCoE software HBA tear-down function
  * @netdev: ptr to the associated net_device
  *
  * Returns: 0 if link is OK for use by FCoE.
@@ -301,7 +298,7 @@ static int fcoe_sw_destroy(struct net_device *netdev)
 	if (!lp)
 		return -ENODEV;
 
-	fc = fcoe_softc(lp);
+	fc = lport_priv(lp);
 
 	/* Logout of the fabric */
 	fc_fabric_logoff(lp);
@@ -353,8 +350,8 @@ static struct libfc_function_template fcoe_sw_libfc_fcn_templ = {
 	.frame_send = fcoe_xmit,
 };
 
-/*
- * fcoe_sw_create - this function creates the fcoe interface
+/**
+ * fcoe_sw_create() - this function creates the fcoe interface
  * @netdev: pointer the associated netdevice
  *
  * Creates fc_lport struct and scsi_host for lport, configures lport
@@ -440,8 +437,8 @@ out_host_put:
 	return rc;
 }
 
-/*
- * fcoe_sw_match - the fcoe sw transport match function
+/**
+ * fcoe_sw_match() - The FCoE SW transport match function
  *
  * Returns : false always
  */
@@ -461,8 +458,8 @@ struct fcoe_transport fcoe_sw_transport = {
 	.device = 0xffff,
 };
 
-/*
- * fcoe_sw_init - registers fcoe_sw_transport
+/**
+ * fcoe_sw_init() - Registers fcoe_sw_transport
  *
  * Returns : 0 on success
  */
@@ -471,17 +468,22 @@ int __init fcoe_sw_init(void)
 	/* attach to scsi transport */
 	scsi_transport_fcoe_sw =
 		fc_attach_transport(&fcoe_sw_transport_function);
+
 	if (!scsi_transport_fcoe_sw) {
 		printk(KERN_ERR "fcoe_sw_init:fc_attach_transport() failed\n");
 		return -ENODEV;
 	}
+
+	mutex_init(&fcoe_sw_transport.devlock);
+	INIT_LIST_HEAD(&fcoe_sw_transport.devlist);
+
 	/* register sw transport */
 	fcoe_transport_register(&fcoe_sw_transport);
 	return 0;
 }
 
-/*
- * fcoe_sw_exit - unregisters fcoe_sw_transport
+/**
+ * fcoe_sw_exit() - Unregisters fcoe_sw_transport
  *
  * Returns : 0 on success
  */
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index e419f486cdb..5548bf3bb58 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -49,6 +49,7 @@
 static int debug_fcoe;
 
 #define FCOE_MAX_QUEUE_DEPTH  256
+#define FCOE_LOW_QUEUE_DEPTH  32
 
 /* destination address mode */
 #define FCOE_GW_ADDR_MODE	    0x00
@@ -69,8 +70,6 @@ struct fcoe_percpu_s *fcoe_percpu[NR_CPUS];
 
 /* Function Prototyes */
 static int fcoe_check_wait_queue(struct fc_lport *);
-static void fcoe_insert_wait_queue_head(struct fc_lport *, struct sk_buff *);
-static void fcoe_insert_wait_queue(struct fc_lport *, struct sk_buff *);
 static void fcoe_recv_flogi(struct fcoe_softc *, struct fc_frame *, u8 *);
 #ifdef CONFIG_HOTPLUG_CPU
 static int fcoe_cpu_callback(struct notifier_block *, ulong, void *);
@@ -91,13 +90,13 @@ static struct notifier_block fcoe_cpu_notifier = {
 };
 
 /**
- * fcoe_create_percpu_data - creates the associated cpu data
+ * fcoe_create_percpu_data() - creates the associated cpu data
  * @cpu: index for the cpu where fcoe cpu data will be created
  *
  * create percpu stats block, from cpu add notifier
  *
  * Returns: none
- **/
+ */
 static void fcoe_create_percpu_data(int cpu)
 {
 	struct fc_lport *lp;
@@ -115,13 +114,13 @@ static void fcoe_create_percpu_data(int cpu)
 }
 
 /**
- * fcoe_destroy_percpu_data - destroys the associated cpu data
+ * fcoe_destroy_percpu_data() - destroys the associated cpu data
  * @cpu: index for the cpu where fcoe cpu data will destroyed
  *
  * destroy percpu stats block called by cpu add/remove notifier
  *
  * Retuns: none
- **/
+ */
 static void fcoe_destroy_percpu_data(int cpu)
 {
 	struct fc_lport *lp;
@@ -137,7 +136,7 @@ static void fcoe_destroy_percpu_data(int cpu)
 }
 
 /**
- * fcoe_cpu_callback - fcoe cpu hotplug event callback
+ * fcoe_cpu_callback() - fcoe cpu hotplug event callback
  * @nfb: callback data block
  * @action: event triggering the callback
  * @hcpu: index for the cpu of this event
@@ -145,7 +144,7 @@ static void fcoe_destroy_percpu_data(int cpu)
  * this creates or destroys per cpu data for fcoe
  *
  * Returns NOTIFY_OK always.
- **/
+ */
 static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action,
 			     void *hcpu)
 {
@@ -166,7 +165,7 @@ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action,
 #endif /* CONFIG_HOTPLUG_CPU */
 
 /**
- * fcoe_rcv - this is the fcoe receive function called by NET_RX_SOFTIRQ
+ * fcoe_rcv() - this is the fcoe receive function called by NET_RX_SOFTIRQ
  * @skb: the receive skb
  * @dev: associated net device
  * @ptype: context
@@ -175,7 +174,7 @@ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action,
  * this function will receive the packet and build fc frame and pass it up
  *
  * Returns: 0 for success
- **/
+ */
 int fcoe_rcv(struct sk_buff *skb, struct net_device *dev,
 	     struct packet_type *ptype, struct net_device *olddev)
 {
@@ -265,11 +264,11 @@ err2:
 EXPORT_SYMBOL_GPL(fcoe_rcv);
 
 /**
- * fcoe_start_io - pass to netdev to start xmit for fcoe
+ * fcoe_start_io() - pass to netdev to start xmit for fcoe
  * @skb: the skb to be xmitted
  *
  * Returns: 0 for success
- **/
+ */
 static inline int fcoe_start_io(struct sk_buff *skb)
 {
 	int rc;
@@ -283,12 +282,12 @@ static inline int fcoe_start_io(struct sk_buff *skb)
 }
 
 /**
- * fcoe_get_paged_crc_eof - in case we need alloc a page for crc_eof
+ * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
  * @skb: the skb to be xmitted
  * @tlen: total len
  *
  * Returns: 0 for success
- **/
+ */
 static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
 {
 	struct fcoe_percpu_s *fps;
@@ -326,13 +325,12 @@ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
 }
 
 /**
- * fcoe_fc_crc - calculates FC CRC in this fcoe skb
+ * fcoe_fc_crc() - calculates FC CRC in this fcoe skb
  * @fp: the fc_frame containg data to be checksummed
  *
  * This uses crc32() to calculate the crc for fc frame
  * Return   : 32 bit crc
- *
- **/
+ */
 u32 fcoe_fc_crc(struct fc_frame *fp)
 {
 	struct sk_buff *skb = fp_skb(fp);
@@ -363,13 +361,12 @@ u32 fcoe_fc_crc(struct fc_frame *fp)
 EXPORT_SYMBOL_GPL(fcoe_fc_crc);
 
 /**
- * fcoe_xmit - FCoE frame transmit function
+ * fcoe_xmit() - FCoE frame transmit function
  * @lp:	the associated local port
  * @fp: the fc_frame to be transmitted
  *
  * Return   : 0 for success
- *
- **/
+ */
 int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 {
 	int wlen, rc = 0;
@@ -389,7 +386,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 
 	WARN_ON((fr_len(fp) % sizeof(u32)) != 0);
 
-	fc = fcoe_softc(lp);
+	fc = lport_priv(lp);
 	/*
 	 * if it is a flogi then we need to learn gw-addr
 	 * and my own fcid
@@ -439,7 +436,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 	if (skb_is_nonlinear(skb)) {
 		skb_frag_t *frag;
 		if (fcoe_get_paged_crc_eof(skb, tlen)) {
-			kfree(skb);
+			kfree_skb(skb);
 			return -ENOMEM;
 		}
 		frag = &skb_shinfo(skb)->frags[skb_shinfo(skb)->nr_frags - 1];
@@ -502,21 +499,22 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 		rc = fcoe_start_io(skb);
 
 	if (rc) {
-		fcoe_insert_wait_queue(lp, skb);
+		spin_lock_bh(&fc->fcoe_pending_queue.lock);
+		__skb_queue_tail(&fc->fcoe_pending_queue, skb);
+		spin_unlock_bh(&fc->fcoe_pending_queue.lock);
 		if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
-			fc_pause(lp);
+			lp->qfull = 1;
 	}
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(fcoe_xmit);
 
-/*
- * fcoe_percpu_receive_thread - recv thread per cpu
+/**
+ * fcoe_percpu_receive_thread() - recv thread per cpu
  * @arg: ptr to the fcoe per cpu struct
  *
  * Return: 0 for success
- *
  */
 int fcoe_percpu_receive_thread(void *arg)
 {
@@ -533,7 +531,7 @@ int fcoe_percpu_receive_thread(void *arg)
 	struct fcoe_softc *fc;
 	struct fcoe_hdr *hp;
 
-	set_user_nice(current, 19);
+	set_user_nice(current, -20);
 
 	while (!kthread_should_stop()) {
 
@@ -658,7 +656,7 @@ int fcoe_percpu_receive_thread(void *arg)
 }
 
 /**
- * fcoe_recv_flogi - flogi receive function
+ * fcoe_recv_flogi() - flogi receive function
  * @fc: associated fcoe_softc
  * @fp: the recieved frame
  * @sa: the source address of this flogi
@@ -667,7 +665,7 @@ int fcoe_percpu_receive_thread(void *arg)
  * mac address for the initiator, eitehr OUI based or GW based.
  *
  * Returns: none
- **/
+ */
 static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa)
 {
 	struct fc_frame_header *fh;
@@ -715,32 +713,23 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa)
 }
 
 /**
- * fcoe_watchdog - fcoe timer callback
+ * fcoe_watchdog() - fcoe timer callback
  * @vp:
  *
- * This checks the pending queue length for fcoe and put fcoe to be paused state
+ * This checks the pending queue length for fcoe and set lport qfull
  * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the
  * fcoe_hostlist.
  *
  * Returns: 0 for success
- **/
+ */
 void fcoe_watchdog(ulong vp)
 {
-	struct fc_lport *lp;
 	struct fcoe_softc *fc;
-	int paused = 0;
 
 	read_lock(&fcoe_hostlist_lock);
 	list_for_each_entry(fc, &fcoe_hostlist, list) {
-		lp = fc->lp;
-		if (lp) {
-			if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
-				paused = 1;
-			if (fcoe_check_wait_queue(lp) <	 FCOE_MAX_QUEUE_DEPTH) {
-				if (paused)
-					fc_unpause(lp);
-			}
-		}
+		if (fc->lp)
+			fcoe_check_wait_queue(fc->lp);
 	}
 	read_unlock(&fcoe_hostlist_lock);
 
@@ -750,96 +739,64 @@ void fcoe_watchdog(ulong vp)
 
 
 /**
- * fcoe_check_wait_queue - put the skb into fcoe pending xmit queue
+ * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
  * @lp: the fc_port for this skb
  * @skb: the associated skb to be xmitted
  *
  * This empties the wait_queue, dequeue the head of the wait_queue queue
  * and calls fcoe_start_io() for each packet, if all skb have been
- * transmitted, return 0 if a error occurs, then restore wait_queue and
- * try again later.
+ * transmitted, return qlen or -1 if a error occurs, then restore
+ * wait_queue and  try again later.
  *
  * The wait_queue is used when the skb transmit fails. skb will go
  * in the wait_queue which will be emptied by the time function OR
  * by the next skb transmit.
  *
  * Returns: 0 for success
- **/
+ */
 static int fcoe_check_wait_queue(struct fc_lport *lp)
 {
-	int rc, unpause = 0;
-	int paused = 0;
+	struct fcoe_softc *fc = lport_priv(lp);
 	struct sk_buff *skb;
-	struct fcoe_softc *fc;
+	int rc = -1;
 
-	fc = fcoe_softc(lp);
 	spin_lock_bh(&fc->fcoe_pending_queue.lock);
+	if (fc->fcoe_pending_queue_active)
+		goto out;
+	fc->fcoe_pending_queue_active = 1;
 
-	/*
-	 * is this interface paused?
-	 */
-	if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
-		paused = 1;
-	if (fc->fcoe_pending_queue.qlen) {
-		while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) {
-			spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-			rc = fcoe_start_io(skb);
-			if (rc) {
-				fcoe_insert_wait_queue_head(lp, skb);
-				return rc;
-			}
-			spin_lock_bh(&fc->fcoe_pending_queue.lock);
-		}
-		if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH)
-			unpause = 1;
-	}
-	spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-	if ((unpause) && (paused))
-		fc_unpause(lp);
-	return fc->fcoe_pending_queue.qlen;
-}
-
-/**
- * fcoe_insert_wait_queue_head - puts skb to fcoe pending queue head
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
- *
- * Returns: none
- **/
-static void fcoe_insert_wait_queue_head(struct fc_lport *lp,
-					struct sk_buff *skb)
-{
-	struct fcoe_softc *fc;
+	while (fc->fcoe_pending_queue.qlen) {
+		/* keep qlen > 0 until fcoe_start_io succeeds */
+		fc->fcoe_pending_queue.qlen++;
+		skb = __skb_dequeue(&fc->fcoe_pending_queue);
 
-	fc = fcoe_softc(lp);
-	spin_lock_bh(&fc->fcoe_pending_queue.lock);
-	__skb_queue_head(&fc->fcoe_pending_queue, skb);
-	spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-}
+		spin_unlock_bh(&fc->fcoe_pending_queue.lock);
+		rc = fcoe_start_io(skb);
+		spin_lock_bh(&fc->fcoe_pending_queue.lock);
 
-/**
- * fcoe_insert_wait_queue - put the skb into fcoe pending queue tail
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
- *
- * Returns: none
- **/
-static void fcoe_insert_wait_queue(struct fc_lport *lp,
-				   struct sk_buff *skb)
-{
-	struct fcoe_softc *fc;
+		if (rc) {
+			__skb_queue_head(&fc->fcoe_pending_queue, skb);
+			/* undo temporary increment above */
+			fc->fcoe_pending_queue.qlen--;
+			break;
+		}
+		/* undo temporary increment above */
+		fc->fcoe_pending_queue.qlen--;
+	}
 
-	fc = fcoe_softc(lp);
-	spin_lock_bh(&fc->fcoe_pending_queue.lock);
-	__skb_queue_tail(&fc->fcoe_pending_queue, skb);
+	if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
+		lp->qfull = 0;
+	fc->fcoe_pending_queue_active = 0;
+	rc = fc->fcoe_pending_queue.qlen;
+out:
 	spin_unlock_bh(&fc->fcoe_pending_queue.lock);
+	return rc;
 }
 
 /**
- * fcoe_dev_setup - setup link change notification interface
- *
- **/
-static void fcoe_dev_setup(void)
+ * fcoe_dev_setup() - setup link change notification interface
+ */
+static void fcoe_dev_setup()
 {
 	/*
 	 * here setup a interface specific wd time to
@@ -849,15 +806,15 @@ static void fcoe_dev_setup(void)
 }
 
 /**
- * fcoe_dev_setup - cleanup link change notification interface
- **/
+ * fcoe_dev_setup() - cleanup link change notification interface
+ */
 static void fcoe_dev_cleanup(void)
 {
 	unregister_netdevice_notifier(&fcoe_notifier);
 }
 
 /**
- * fcoe_device_notification - netdev event notification callback
+ * fcoe_device_notification() - netdev event notification callback
  * @notifier: context of the notification
  * @event: type of event
  * @ptr: fixed array for output parsed ifname
@@ -865,7 +822,7 @@ static void fcoe_dev_cleanup(void)
  * This function is called by the ethernet driver in case of link change event
  *
  * Returns: 0 for success
- **/
+ */
 static int fcoe_device_notification(struct notifier_block *notifier,
 				    ulong event, void *ptr)
 {
@@ -873,7 +830,7 @@ static int fcoe_device_notification(struct notifier_block *notifier,
 	struct net_device *real_dev = ptr;
 	struct fcoe_softc *fc;
 	struct fcoe_dev_stats *stats;
-	u16 new_status;
+	u32 new_link_up;
 	u32 mfs;
 	int rc = NOTIFY_OK;
 
@@ -890,17 +847,15 @@ static int fcoe_device_notification(struct notifier_block *notifier,
 		goto out;
 	}
 
-	new_status = lp->link_status;
+	new_link_up = lp->link_up;
 	switch (event) {
 	case NETDEV_DOWN:
 	case NETDEV_GOING_DOWN:
-		new_status &= ~FC_LINK_UP;
+		new_link_up = 0;
 		break;
 	case NETDEV_UP:
 	case NETDEV_CHANGE:
-		new_status &= ~FC_LINK_UP;
-		if (!fcoe_link_ok(lp))
-			new_status |= FC_LINK_UP;
+		new_link_up = !fcoe_link_ok(lp);
 		break;
 	case NETDEV_CHANGEMTU:
 		mfs = fc->real_dev->mtu -
@@ -908,17 +863,15 @@ static int fcoe_device_notification(struct notifier_block *notifier,
 			 sizeof(struct fcoe_crc_eof));
 		if (mfs >= FC_MIN_MAX_FRAME)
 			fc_set_mfs(lp, mfs);
-		new_status &= ~FC_LINK_UP;
-		if (!fcoe_link_ok(lp))
-			new_status |= FC_LINK_UP;
+		new_link_up = !fcoe_link_ok(lp);
 		break;
 	case NETDEV_REGISTER:
 		break;
 	default:
 		FC_DBG("unknown event %ld call", event);
 	}
-	if (lp->link_status != new_status) {
-		if ((new_status & FC_LINK_UP) == FC_LINK_UP)
+	if (lp->link_up != new_link_up) {
+		if (new_link_up)
 			fc_linkup(lp);
 		else {
 			stats = lp->dev_stats[smp_processor_id()];
@@ -933,12 +886,12 @@ out:
 }
 
 /**
- * fcoe_if_to_netdev - parse a name buffer to get netdev
+ * fcoe_if_to_netdev() - parse a name buffer to get netdev
  * @ifname: fixed array for output parsed ifname
  * @buffer: incoming buffer to be copied
  *
  * Returns: NULL or ptr to netdeive
- **/
+ */
 static struct net_device *fcoe_if_to_netdev(const char *buffer)
 {
 	char *cp;
@@ -955,13 +908,13 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer)
 }
 
 /**
- * fcoe_netdev_to_module_owner - finds out the nic drive moddule of the netdev
+ * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
  * @netdev: the target netdev
  *
  * Returns: ptr to the struct module, NULL for failure
- **/
-static struct module *fcoe_netdev_to_module_owner(
-	const struct net_device *netdev)
+ */
+static struct module *
+fcoe_netdev_to_module_owner(const struct net_device *netdev)
 {
 	struct device *dev;
 
@@ -979,12 +932,14 @@ static struct module *fcoe_netdev_to_module_owner(
 }
 
 /**
- * fcoe_ethdrv_get - holds the nic driver module by  try_module_get() for
- * the corresponding netdev.
+ * fcoe_ethdrv_get() - Hold the Ethernet driver
  * @netdev: the target netdev
  *
+ * Holds the Ethernet driver module by try_module_get() for
+ * the corresponding netdev.
+ *
  * Returns: 0 for succsss
- **/
+ */
 static int fcoe_ethdrv_get(const struct net_device *netdev)
 {
 	struct module *owner;
@@ -999,12 +954,14 @@ static int fcoe_ethdrv_get(const struct net_device *netdev)
 }
 
 /**
- * fcoe_ethdrv_get - releases the nic driver module by module_put for
- * the corresponding netdev.
+ * fcoe_ethdrv_put() - Release the Ethernet driver
  * @netdev: the target netdev
  *
+ * Releases the Ethernet driver module by module_put for
+ * the corresponding netdev.
+ *
  * Returns: 0 for succsss
- **/
+ */
 static int fcoe_ethdrv_put(const struct net_device *netdev)
 {
 	struct module *owner;
@@ -1020,12 +977,12 @@ static int fcoe_ethdrv_put(const struct net_device *netdev)
 }
 
 /**
- * fcoe_destroy- handles the destroy from sysfs
+ * fcoe_destroy() - handles the destroy from sysfs
  * @buffer: expcted to be a eth if name
  * @kp: associated kernel param
  *
  * Returns: 0 for success
- **/
+ */
 static int fcoe_destroy(const char *buffer, struct kernel_param *kp)
 {
 	int rc;
@@ -1058,12 +1015,12 @@ out_nodev:
 }
 
 /**
- * fcoe_create - handles the create call from sysfs
+ * fcoe_create() - Handles the create call from sysfs
  * @buffer: expcted to be a eth if name
  * @kp: associated kernel param
  *
  * Returns: 0 for success
- **/
+ */
 static int fcoe_create(const char *buffer, struct kernel_param *kp)
 {
 	int rc;
@@ -1104,8 +1061,8 @@ module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR);
 __MODULE_PARM_TYPE(destroy, "string");
 MODULE_PARM_DESC(destroy, "Destroy fcoe port");
 
-/*
- * fcoe_link_ok - check if link is ok for the fc_lport
+/**
+ * fcoe_link_ok() - Check if link is ok for the fc_lport
  * @lp: ptr to the fc_lport
  *
  * Any permanently-disqualifying conditions have been previously checked.
@@ -1120,7 +1077,7 @@ MODULE_PARM_DESC(destroy, "Destroy fcoe port");
  */
 int fcoe_link_ok(struct fc_lport *lp)
 {
-	struct fcoe_softc *fc = fcoe_softc(lp);
+	struct fcoe_softc *fc = lport_priv(lp);
 	struct net_device *dev = fc->real_dev;
 	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
 	int rc = 0;
@@ -1149,9 +1106,8 @@ int fcoe_link_ok(struct fc_lport *lp)
 }
 EXPORT_SYMBOL_GPL(fcoe_link_ok);
 
-/*
- * fcoe_percpu_clean - frees skb of the corresponding lport from the per
- * cpu queue.
+/**
+ * fcoe_percpu_clean() - Clear the pending skbs for an lport
  * @lp: the fc_lport
  */
 void fcoe_percpu_clean(struct fc_lport *lp)
@@ -1185,11 +1141,11 @@ void fcoe_percpu_clean(struct fc_lport *lp)
 EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
 
 /**
- * fcoe_clean_pending_queue - dequeue skb and free it
+ * fcoe_clean_pending_queue() - Dequeue a skb and free it
  * @lp: the corresponding fc_lport
  *
  * Returns: none
- **/
+ */
 void fcoe_clean_pending_queue(struct fc_lport *lp)
 {
 	struct fcoe_softc  *fc = lport_priv(lp);
@@ -1206,21 +1162,21 @@ void fcoe_clean_pending_queue(struct fc_lport *lp)
 EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
 
 /**
- * libfc_host_alloc - allocate a Scsi_Host with room for the fc_lport
+ * libfc_host_alloc() - Allocate a Scsi_Host with room for the fc_lport
  * @sht: ptr to the scsi host templ
  * @priv_size: size of private data after fc_lport
  *
  * Returns: ptr to Scsi_Host
- * TODO - to libfc?
+ * TODO: to libfc?
  */
-static inline struct Scsi_Host *libfc_host_alloc(
-	struct scsi_host_template *sht, int priv_size)
+static inline struct Scsi_Host *
+libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
 {
 	return scsi_host_alloc(sht, sizeof(struct fc_lport) + priv_size);
 }
 
 /**
- * fcoe_host_alloc - allocate a Scsi_Host with room for the fcoe_softc
+ * fcoe_host_alloc() - Allocate a Scsi_Host with room for the fcoe_softc
  * @sht: ptr to the scsi host templ
  * @priv_size: size of private data after fc_lport
  *
@@ -1232,8 +1188,8 @@ struct Scsi_Host *fcoe_host_alloc(struct scsi_host_template *sht, int priv_size)
 }
 EXPORT_SYMBOL_GPL(fcoe_host_alloc);
 
-/*
- * fcoe_reset - resets the fcoe
+/**
+ * fcoe_reset() - Resets the fcoe
  * @shost: shost the reset is from
  *
  * Returns: always 0
@@ -1246,8 +1202,8 @@ int fcoe_reset(struct Scsi_Host *shost)
 }
 EXPORT_SYMBOL_GPL(fcoe_reset);
 
-/*
- * fcoe_wwn_from_mac - converts 48-bit IEEE MAC address to 64-bit FC WWN.
+/**
+ * fcoe_wwn_from_mac() - Converts 48-bit IEEE MAC address to 64-bit FC WWN.
  * @mac: mac address
  * @scheme: check port
  * @port: port indicator for converting
@@ -1286,14 +1242,15 @@ u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN],
 	return wwn;
 }
 EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac);
-/*
- * fcoe_hostlist_lookup_softc - find the corresponding lport by a given device
+
+/**
+ * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
  * @device: this is currently ptr to net_device
  *
  * Returns: NULL or the located fcoe_softc
  */
-static struct fcoe_softc *fcoe_hostlist_lookup_softc(
-	const struct net_device *dev)
+static struct fcoe_softc *
+fcoe_hostlist_lookup_softc(const struct net_device *dev)
 {
 	struct fcoe_softc *fc;
 
@@ -1308,8 +1265,8 @@ static struct fcoe_softc *fcoe_hostlist_lookup_softc(
 	return NULL;
 }
 
-/*
- * fcoe_hostlist_lookup - find the corresponding lport by netdev
+/**
+ * fcoe_hostlist_lookup() - Find the corresponding lport by netdev
  * @netdev: ptr to net_device
  *
  * Returns: 0 for success
@@ -1324,8 +1281,8 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev)
 }
 EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
 
-/*
- * fcoe_hostlist_add - add a lport to lports list
+/**
+ * fcoe_hostlist_add() - Add a lport to lports list
  * @lp: ptr to the fc_lport to badded
  *
  * Returns: 0 for success
@@ -1336,7 +1293,7 @@ int fcoe_hostlist_add(const struct fc_lport *lp)
 
 	fc = fcoe_hostlist_lookup_softc(fcoe_netdev(lp));
 	if (!fc) {
-		fc = fcoe_softc(lp);
+		fc = lport_priv(lp);
 		write_lock_bh(&fcoe_hostlist_lock);
 		list_add_tail(&fc->list, &fcoe_hostlist);
 		write_unlock_bh(&fcoe_hostlist_lock);
@@ -1345,8 +1302,8 @@ int fcoe_hostlist_add(const struct fc_lport *lp)
 }
 EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
 
-/*
- * fcoe_hostlist_remove - remove a lport from lports list
+/**
+ * fcoe_hostlist_remove() - remove a lport from lports list
  * @lp: ptr to the fc_lport to badded
  *
  * Returns: 0 for success
@@ -1366,12 +1323,12 @@ int fcoe_hostlist_remove(const struct fc_lport *lp)
 EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
 
 /**
- * fcoe_libfc_config - sets up libfc related properties for lport
+ * fcoe_libfc_config() - sets up libfc related properties for lport
  * @lp: ptr to the fc_lport
  * @tt: libfc function template
  *
  * Returns : 0 for success
- **/
+ */
 int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt)
 {
 	/* Set the function pointers set by the LLDD */
@@ -1389,14 +1346,14 @@ int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt)
 EXPORT_SYMBOL_GPL(fcoe_libfc_config);
 
 /**
- * fcoe_init - fcoe module loading initialization
+ * fcoe_init() - fcoe module loading initialization
  *
  * Initialization routine
  * 1. Will create fc transport software structure
  * 2. initialize the link list of port information structure
  *
  * Returns 0 on success, negative on failure
- **/
+ */
 static int __init fcoe_init(void)
 {
 	int cpu;
@@ -1433,7 +1390,6 @@ static int __init fcoe_init(void)
 			} else {
 				fcoe_percpu[cpu] = NULL;
 				kfree(p);
-
 			}
 		}
 	}
@@ -1443,11 +1399,9 @@ static int __init fcoe_init(void)
 	 */
 	fcoe_dev_setup();
 
-	init_timer(&fcoe_timer);
-	fcoe_timer.data = 0;
-	fcoe_timer.function = fcoe_watchdog;
-	fcoe_timer.expires = (jiffies + (10 * HZ));
-	add_timer(&fcoe_timer);
+	setup_timer(&fcoe_timer, fcoe_watchdog, 0);
+
+	mod_timer(&fcoe_timer, jiffies + (10 * HZ));
 
 	/* initiatlize the fcoe transport */
 	fcoe_transport_init();
@@ -1459,10 +1413,10 @@ static int __init fcoe_init(void)
 module_init(fcoe_init);
 
 /**
- * fcoe_exit - fcoe module unloading cleanup
+ * fcoe_exit() - fcoe module unloading cleanup
  *
  * Returns 0 on success, negative on failure
- **/
+ */
 static void __exit fcoe_exit(void)
 {
 	u32 idx;
@@ -1483,7 +1437,7 @@ static void __exit fcoe_exit(void)
 	 */
 	del_timer_sync(&fcoe_timer);
 
-	/* releases the assocaited fcoe transport for each lport */
+	/* releases the associated fcoe transport for each lport */
 	list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list)
 		fcoe_transport_release(fc->real_dev);
 
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index 4a4e6954ec7..f23c4ca9a2e 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -103,7 +103,7 @@ lasi700_probe(struct parisc_device *dev)
 
 	hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
 	if (!hostdata) {
-		dev_printk(KERN_ERR, dev, "Failed to allocate host data\n");
+		dev_printk(KERN_ERR, &dev->dev, "Failed to allocate host data\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index dd1564c9e04..e57556ea5b4 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -64,7 +64,7 @@ static void fc_disc_single(struct fc_disc *, struct fc_disc_port *);
 static void fc_disc_restart(struct fc_disc *);
 
 /**
- * fc_disc_lookup_rport - lookup a remote port by port_id
+ * fc_disc_lookup_rport() - lookup a remote port by port_id
  * @lport: Fibre Channel host port instance
  * @port_id: remote port port_id to match
  */
@@ -92,7 +92,7 @@ struct fc_rport *fc_disc_lookup_rport(const struct fc_lport *lport,
 }
 
 /**
- * fc_disc_stop_rports - delete all the remote ports associated with the lport
+ * fc_disc_stop_rports() - delete all the remote ports associated with the lport
  * @disc: The discovery job to stop rports on
  *
  * Locking Note: This function expects that the lport mutex is locked before
@@ -117,7 +117,7 @@ void fc_disc_stop_rports(struct fc_disc *disc)
 }
 
 /**
- * fc_disc_rport_callback - Event handler for rport events
+ * fc_disc_rport_callback() - Event handler for rport events
  * @lport: The lport which is receiving the event
  * @rport: The rport which the event has occured on
  * @event: The event that occured
@@ -151,7 +151,7 @@ static void fc_disc_rport_callback(struct fc_lport *lport,
 }
 
 /**
- * fc_disc_recv_rscn_req - Handle Registered State Change Notification (RSCN)
+ * fc_disc_recv_rscn_req() - Handle Registered State Change Notification (RSCN)
  * @sp: Current sequence of the RSCN exchange
  * @fp: RSCN Frame
  * @lport: Fibre Channel host port instance
@@ -246,7 +246,7 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp,
 			list_del(&dp->peers);
 			rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
 			if (rport) {
-				rdata = RPORT_TO_PRIV(rport);
+				rdata = rport->dd_data;
 				list_del(&rdata->peers);
 				lport->tt.rport_logoff(rport);
 			}
@@ -265,7 +265,7 @@ reject:
 }
 
 /**
- * fc_disc_recv_req - Handle incoming requests
+ * fc_disc_recv_req() - Handle incoming requests
  * @sp: Current sequence of the request exchange
  * @fp: The frame
  * @lport: The FC local port
@@ -294,7 +294,7 @@ static void fc_disc_recv_req(struct fc_seq *sp, struct fc_frame *fp,
 }
 
 /**
- * fc_disc_restart - Restart discovery
+ * fc_disc_restart() - Restart discovery
  * @lport: FC discovery context
  *
  * Locking Note: This function expects that the disc mutex
@@ -322,7 +322,7 @@ static void fc_disc_restart(struct fc_disc *disc)
 }
 
 /**
- * fc_disc_start - Fibre Channel Target discovery
+ * fc_disc_start() - Fibre Channel Target discovery
  * @lport: FC local port
  *
  * Returns non-zero if discovery cannot be started.
@@ -383,7 +383,7 @@ static struct fc_rport_operations fc_disc_rport_ops = {
 };
 
 /**
- * fc_disc_new_target - Handle new target found by discovery
+ * fc_disc_new_target() - Handle new target found by discovery
  * @lport: FC local port
  * @rport: The previous FC remote port (NULL if new remote port)
  * @ids: Identifiers for the new FC remote port
@@ -396,7 +396,7 @@ static int fc_disc_new_target(struct fc_disc *disc,
 			      struct fc_rport_identifiers *ids)
 {
 	struct fc_lport *lport = disc->lport;
-	struct fc_rport_libfc_priv *rp;
+	struct fc_rport_libfc_priv *rdata;
 	int error = 0;
 
 	if (rport && ids->port_name) {
@@ -430,15 +430,15 @@ static int fc_disc_new_target(struct fc_disc *disc,
 				dp.ids.port_name = ids->port_name;
 				dp.ids.node_name = ids->node_name;
 				dp.ids.roles = ids->roles;
-				rport = fc_rport_rogue_create(&dp);
+				rport = lport->tt.rport_create(&dp);
 			}
 			if (!rport)
 				error = -ENOMEM;
 		}
 		if (rport) {
-			rp = rport->dd_data;
-			rp->ops = &fc_disc_rport_ops;
-			rp->rp_state = RPORT_ST_INIT;
+			rdata = rport->dd_data;
+			rdata->ops = &fc_disc_rport_ops;
+			rdata->rp_state = RPORT_ST_INIT;
 			lport->tt.rport_login(rport);
 		}
 	}
@@ -446,20 +446,20 @@ static int fc_disc_new_target(struct fc_disc *disc,
 }
 
 /**
- * fc_disc_del_target - Delete a target
+ * fc_disc_del_target() - Delete a target
  * @disc: FC discovery context
  * @rport: The remote port to be removed
  */
 static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport)
 {
 	struct fc_lport *lport = disc->lport;
-	struct fc_rport_libfc_priv *rdata = RPORT_TO_PRIV(rport);
+	struct fc_rport_libfc_priv *rdata = rport->dd_data;
 	list_del(&rdata->peers);
 	lport->tt.rport_logoff(rport);
 }
 
 /**
- * fc_disc_done - Discovery has been completed
+ * fc_disc_done() - Discovery has been completed
  * @disc: FC discovery context
  */
 static void fc_disc_done(struct fc_disc *disc)
@@ -479,7 +479,7 @@ static void fc_disc_done(struct fc_disc *disc)
 }
 
 /**
- * fc_disc_error - Handle error on dNS request
+ * fc_disc_error() - Handle error on dNS request
  * @disc: FC discovery context
  * @fp: The frame pointer
  */
@@ -519,7 +519,7 @@ static void fc_disc_error(struct fc_disc *disc, struct fc_frame *fp)
 }
 
 /**
- * fc_disc_gpn_ft_req - Send Get Port Names by FC-4 type (GPN_FT) request
+ * fc_disc_gpn_ft_req() - Send Get Port Names by FC-4 type (GPN_FT) request
  * @lport: FC discovery context
  *
  * Locking Note: This function expects that the disc_mutex is locked
@@ -553,7 +553,7 @@ err:
 }
 
 /**
- * fc_disc_gpn_ft_parse - Parse the list of IDs and names resulting from a request
+ * fc_disc_gpn_ft_parse() - Parse the list of IDs and names resulting from a request
  * @lport: Fibre Channel host port instance
  * @buf: GPN_FT response buffer
  * @len: size of response buffer
@@ -617,7 +617,7 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len)
 
 		if ((dp.ids.port_id != fc_host_port_id(lport->host)) &&
 		    (dp.ids.port_name != lport->wwpn)) {
-			rport = fc_rport_rogue_create(&dp);
+			rport = lport->tt.rport_create(&dp);
 			if (rport) {
 				rdata = rport->dd_data;
 				rdata->ops = &fc_disc_rport_ops;
@@ -658,7 +658,10 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len)
 	return error;
 }
 
-/*
+/**
+ * fc_disc_timeout() - Retry handler for the disc component
+ * @work: Structure holding disc obj that needs retry discovery
+ *
  * Handle retry of memory allocation for remote ports.
  */
 static void fc_disc_timeout(struct work_struct *work)
@@ -673,7 +676,7 @@ static void fc_disc_timeout(struct work_struct *work)
 }
 
 /**
- * fc_disc_gpn_ft_resp - Handle a response frame from Get Port Names (GPN_FT)
+ * fc_disc_gpn_ft_resp() - Handle a response frame from Get Port Names (GPN_FT)
  * @sp: Current sequence of GPN_FT exchange
  * @fp: response frame
  * @lp_arg: Fibre Channel host port instance
@@ -712,9 +715,7 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
 			       fr_len(fp));
 		} else if (ntohs(cp->ct_cmd) == FC_FS_ACC) {
 
-			/*
-			 * Accepted.  Parse response.
-			 */
+			/* Accepted, parse the response. */
 			buf = cp + 1;
 			len -= sizeof(*cp);
 		} else if (ntohs(cp->ct_cmd) == FC_FS_RJT) {
@@ -746,7 +747,7 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
 }
 
 /**
- * fc_disc_single - Discover the directory information for a single target
+ * fc_disc_single() - Discover the directory information for a single target
  * @lport: FC local port
  * @dp: The port to rediscover
  *
@@ -769,7 +770,7 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp)
 	if (rport)
 		fc_disc_del_target(disc, rport);
 
-	new_rport = fc_rport_rogue_create(dp);
+	new_rport = lport->tt.rport_create(dp);
 	if (new_rport) {
 		rdata = new_rport->dd_data;
 		rdata->ops = &fc_disc_rport_ops;
@@ -782,7 +783,7 @@ out:
 }
 
 /**
- * fc_disc_stop - Stop discovery for a given lport
+ * fc_disc_stop() - Stop discovery for a given lport
  * @lport: The lport that discovery should stop for
  */
 void fc_disc_stop(struct fc_lport *lport)
@@ -796,7 +797,7 @@ void fc_disc_stop(struct fc_lport *lport)
 }
 
 /**
- * fc_disc_stop_final - Stop discovery for a given lport
+ * fc_disc_stop_final() - Stop discovery for a given lport
  * @lport: The lport that discovery should stop for
  *
  * This function will block until discovery has been
@@ -809,7 +810,7 @@ void fc_disc_stop_final(struct fc_lport *lport)
 }
 
 /**
- * fc_disc_init - Initialize the discovery block
+ * fc_disc_init() - Initialize the discovery block
  * @lport: FC local port
  */
 int fc_disc_init(struct fc_lport *lport)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 66db08a5f27..505825b6124 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -32,8 +32,6 @@
 #include <scsi/libfc.h>
 #include <scsi/fc_encode.h>
 
-#define	  FC_DEF_R_A_TOV      (10 * 1000) /* resource allocation timeout */
-
 /*
  * fc_exch_debug can be set in debugger or at compile time to get more logs.
  */
@@ -627,7 +625,6 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
 {
 	struct fc_exch *ep;
 	struct fc_frame_header *fh;
-	u16 rxid;
 
 	ep = mp->lp->tt.exch_get(mp->lp, fp);
 	if (ep) {
@@ -654,18 +651,6 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
 		if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0)
 			ep->esb_stat &= ~ESB_ST_SEQ_INIT;
 
-		/*
-		 * Set the responder ID in the frame header.
-		 * The old one should've been 0xffff.
-		 * If it isn't, don't assign one.
-		 * Incoming basic link service frames may specify
-		 * a referenced RX_ID.
-		 */
-		if (fh->fh_type != FC_TYPE_BLS) {
-			rxid = ntohs(fh->fh_rx_id);
-			WARN_ON(rxid != FC_XID_UNKNOWN);
-			fh->fh_rx_id = htons(ep->rxid);
-		}
 		fc_exch_hold(ep);	/* hold for caller */
 		spin_unlock_bh(&ep->ex_lock);	/* lock from exch_get */
 	}
@@ -677,8 +662,8 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
  * If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold
  * on the ep that should be released by the caller.
  */
-static enum fc_pf_rjt_reason
-fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp)
+static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_exch_mgr *mp,
+						 struct fc_frame *fp)
 {
 	struct fc_frame_header *fh = fc_frame_header_get(fp);
 	struct fc_exch *ep = NULL;
@@ -996,9 +981,9 @@ static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp)
  * Send BLS Reject.
  * This is for rejecting BA_ABTS only.
  */
-static void
-fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason,
-		    enum fc_ba_rjt_explan explan)
+static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp,
+				enum fc_ba_rjt_reason reason,
+				enum fc_ba_rjt_explan explan)
 {
 	struct fc_frame *fp;
 	struct fc_frame_header *rx_fh;
@@ -1096,7 +1081,7 @@ static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp)
 		ap->ba_high_seq_cnt = fh->fh_seq_cnt;
 		ap->ba_low_seq_cnt = htons(sp->cnt);
 	}
-	sp = fc_seq_start_next(sp);
+	sp = fc_seq_start_next_locked(sp);
 	spin_unlock_bh(&ep->ex_lock);
 	fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS);
 	fc_frame_free(rx_fp);
@@ -1480,10 +1465,11 @@ static void fc_exch_reset(struct fc_exch *ep)
  * If sid is non-zero, reset only exchanges we source from that FID.
  * If did is non-zero, reset only exchanges destined to that FID.
  */
-void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did)
+void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
 {
 	struct fc_exch *ep;
 	struct fc_exch *next;
+	struct fc_exch_mgr *mp = lp->emp;
 
 	spin_lock_bh(&mp->em_lock);
 restart:
@@ -1607,7 +1593,7 @@ static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg)
 	if (IS_ERR(fp)) {
 		int err = PTR_ERR(fp);
 
-		if (err == -FC_EX_CLOSED)
+		if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT)
 			goto cleanup;
 		FC_DBG("Cannot process RRQ, because of frame error %d\n", err);
 		return;
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 404e63ff46b..2a631d7dbce 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -161,7 +161,7 @@ static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lp, gfp_t gfp)
 }
 
 /**
- * fc_fcp_pkt_release - release hold on scsi_pkt packet
+ * fc_fcp_pkt_release() - release hold on scsi_pkt packet
  * @fsp:	fcp packet struct
  *
  * This is used by upper layer scsi driver.
@@ -183,8 +183,7 @@ static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
 }
 
 /**
- * fc_fcp_pkt_destory - release hold on scsi_pkt packet
- *
+ * fc_fcp_pkt_destory() - release hold on scsi_pkt packet
  * @seq:		exchange sequence
  * @fsp:	fcp packet struct
  *
@@ -199,7 +198,7 @@ static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
 }
 
 /**
- * fc_fcp_lock_pkt - lock a packet and get a ref to it.
+ * fc_fcp_lock_pkt() - lock a packet and get a ref to it.
  * @fsp:	fcp packet
  *
  * We should only return error if we return a command to scsi-ml before
@@ -291,9 +290,7 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 	buf = fc_frame_payload_get(fp, 0);
 
 	if (offset + len > fsp->data_len) {
-		/*
-		 * this should never happen
-		 */
+		/* this should never happen */
 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
 		    fc_frame_crc_check(fp))
 			goto crc_err;
@@ -387,8 +384,8 @@ crc_err:
 		fc_fcp_complete_locked(fsp);
 }
 
-/*
- * fc_fcp_send_data -  Send SCSI data to target.
+/**
+ * fc_fcp_send_data() -  Send SCSI data to target.
  * @fsp: ptr to fc_fcp_pkt
  * @sp: ptr to this sequence
  * @offset: starting offset for this data request
@@ -610,8 +607,8 @@ static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 	}
 }
 
-/*
- * fc_fcp_reduce_can_queue - drop can_queue
+/**
+ * fc_fcp_reduce_can_queue() - drop can_queue
  * @lp: lport to drop queueing for
  *
  * If we are getting memory allocation failures, then we may
@@ -642,9 +639,11 @@ done:
 	spin_unlock_irqrestore(lp->host->host_lock, flags);
 }
 
-/*
- * exch mgr calls this routine to process scsi
- * exchanges.
+/**
+ * fc_fcp_recv() - Reveive FCP frames
+ * @seq: The sequence the frame is on
+ * @fp: The FC frame
+ * @arg: The related FCP packet
  *
  * Return   : None
  * Context  : called from Soft IRQ context
@@ -832,7 +831,7 @@ err:
 }
 
 /**
- * fc_fcp_complete_locked - complete processing of a fcp packet
+ * fc_fcp_complete_locked() - complete processing of a fcp packet
  * @fsp:	fcp packet
  *
  * This function may sleep if a timer is pending. The packet lock must be
@@ -900,7 +899,7 @@ static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
 }
 
 /**
- * fc_fcp_cleanup_each_cmd - run fn on each active command
+ * fc_fcp_cleanup_each_cmd() - Cleanup active commads
  * @lp:		logical port
  * @id:		target id
  * @lun:	lun
@@ -952,7 +951,7 @@ static void fc_fcp_abort_io(struct fc_lport *lp)
 }
 
 /**
- * fc_fcp_pkt_send - send a fcp packet to the lower level.
+ * fc_fcp_pkt_send() - send a fcp packet to the lower level.
  * @lp:		fc lport
  * @fsp:	fc packet.
  *
@@ -1621,7 +1620,7 @@ out:
 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp)
 {
 	/* lock ? */
-	return (lp->state == LPORT_ST_READY) && (lp->link_status & FC_LINK_UP);
+	return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull;
 }
 
 /**
@@ -1727,7 +1726,7 @@ out:
 EXPORT_SYMBOL(fc_queuecommand);
 
 /**
- * fc_io_compl -  Handle responses for completed commands
+ * fc_io_compl() -  Handle responses for completed commands
  * @fsp:	scsi packet
  *
  * Translates a error to a Linux SCSI error.
@@ -1810,12 +1809,12 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp)
 		sc_cmd->result = DID_ERROR << 16;
 		break;
 	case FC_DATA_UNDRUN:
-		if (fsp->cdb_status == 0) {
+		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
 			/*
 			 * scsi status is good but transport level
-			 * underrun. for read it should be an error??
+			 * underrun.
 			 */
-			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
+			sc_cmd->result = DID_OK << 16;
 		} else {
 			/*
 			 * scsi got underrun, this is an error
@@ -1857,7 +1856,7 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp)
 }
 
 /**
- * fc_fcp_complete - complete processing of a fcp packet
+ * fc_fcp_complete() - complete processing of a fcp packet
  * @fsp:	fcp packet
  *
  * This function may sleep if a fsp timer is pending.
@@ -1874,9 +1873,10 @@ void fc_fcp_complete(struct fc_fcp_pkt *fsp)
 EXPORT_SYMBOL(fc_fcp_complete);
 
 /**
- * fc_eh_abort - Abort a command...from scsi host template
+ * fc_eh_abort() - Abort a command
  * @sc_cmd:	scsi command to abort
  *
+ * From scsi host template.
  * send ABTS to the target device  and wait for the response
  * sc_cmd is the pointer to the command to be aborted.
  */
@@ -1890,7 +1890,7 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd)
 	lp = shost_priv(sc_cmd->device->host);
 	if (lp->state != LPORT_ST_READY)
 		return rc;
-	else if (!(lp->link_status & FC_LINK_UP))
+	else if (!lp->link_up)
 		return rc;
 
 	spin_lock_irqsave(lp->host->host_lock, flags);
@@ -1920,7 +1920,7 @@ release_pkt:
 EXPORT_SYMBOL(fc_eh_abort);
 
 /**
- * fc_eh_device_reset: Reset a single LUN
+ * fc_eh_device_reset() Reset a single LUN
  * @sc_cmd:	scsi command
  *
  * Set from scsi host template to send tm cmd to the target and wait for the
@@ -1973,7 +1973,7 @@ out:
 EXPORT_SYMBOL(fc_eh_device_reset);
 
 /**
- * fc_eh_host_reset - The reset function will reset the ports on the host.
+ * fc_eh_host_reset() - The reset function will reset the ports on the host.
  * @sc_cmd:	scsi command
  */
 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
@@ -1999,7 +1999,7 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
 EXPORT_SYMBOL(fc_eh_host_reset);
 
 /**
- * fc_slave_alloc - configure queue depth
+ * fc_slave_alloc() - configure queue depth
  * @sdev:	scsi device
  *
  * Configures queue depth based on host's cmd_per_len. If not set
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 0b9bdb1fb80..2ae50a1188e 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -139,7 +139,7 @@ static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp)
 }
 
 /**
- * fc_lport_rport_callback - Event handler for rport events
+ * fc_lport_rport_callback() - Event handler for rport events
  * @lport: The lport which is receiving the event
  * @rport: The rport which the event has occured on
  * @event: The event that occured
@@ -195,7 +195,7 @@ static void fc_lport_rport_callback(struct fc_lport *lport,
 }
 
 /**
- * fc_lport_state - Return a string which represents the lport's state
+ * fc_lport_state() - Return a string which represents the lport's state
  * @lport: The lport whose state is to converted to a string
  */
 static const char *fc_lport_state(struct fc_lport *lport)
@@ -209,7 +209,7 @@ static const char *fc_lport_state(struct fc_lport *lport)
 }
 
 /**
- * fc_lport_ptp_setup - Create an rport for point-to-point mode
+ * fc_lport_ptp_setup() - Create an rport for point-to-point mode
  * @lport: The lport to attach the ptp rport to
  * @fid: The FID of the ptp rport
  * @remote_wwpn: The WWPN of the ptp rport
@@ -232,7 +232,7 @@ static void fc_lport_ptp_setup(struct fc_lport *lport,
 		lport->ptp_rp = NULL;
 	}
 
-	lport->ptp_rp = fc_rport_rogue_create(&dp);
+	lport->ptp_rp = lport->tt.rport_create(&dp);
 
 	lport->tt.rport_login(lport->ptp_rp);
 
@@ -250,7 +250,7 @@ void fc_get_host_port_state(struct Scsi_Host *shost)
 {
 	struct fc_lport *lp = shost_priv(shost);
 
-	if ((lp->link_status & FC_LINK_UP) == FC_LINK_UP)
+	if (lp->link_up)
 		fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
 	else
 		fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
@@ -351,7 +351,7 @@ static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type)
 }
 
 /**
- * fc_lport_recv_rlir_req - Handle received Registered Link Incident Report.
+ * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report.
  * @lport: Fibre Channel local port recieving the RLIR
  * @sp: current sequence in the RLIR exchange
  * @fp: RLIR request frame
@@ -370,7 +370,7 @@ static void fc_lport_recv_rlir_req(struct fc_seq *sp, struct fc_frame *fp,
 }
 
 /**
- * fc_lport_recv_echo_req - Handle received ECHO request
+ * fc_lport_recv_echo_req() - Handle received ECHO request
  * @lport: Fibre Channel local port recieving the ECHO
  * @sp: current sequence in the ECHO exchange
  * @fp: ECHO request frame
@@ -412,7 +412,7 @@ static void fc_lport_recv_echo_req(struct fc_seq *sp, struct fc_frame *in_fp,
 }
 
 /**
- * fc_lport_recv_echo_req - Handle received Request Node ID data request
+ * fc_lport_recv_echo_req() - Handle received Request Node ID data request
  * @lport: Fibre Channel local port recieving the RNID
  * @sp: current sequence in the RNID exchange
  * @fp: RNID request frame
@@ -479,7 +479,7 @@ static void fc_lport_recv_rnid_req(struct fc_seq *sp, struct fc_frame *in_fp,
 }
 
 /**
- * fc_lport_recv_adisc_req - Handle received Address Discovery Request
+ * fc_lport_recv_adisc_req() - Handle received Address Discovery Request
  * @lport: Fibre Channel local port recieving the ADISC
  * @sp: current sequence in the ADISC exchange
  * @fp: ADISC request frame
@@ -529,7 +529,7 @@ static void fc_lport_recv_adisc_req(struct fc_seq *sp, struct fc_frame *in_fp,
 }
 
 /**
- * fc_lport_recv_logo_req - Handle received fabric LOGO request
+ * fc_lport_recv_logo_req() - Handle received fabric LOGO request
  * @lport: Fibre Channel local port recieving the LOGO
  * @sp: current sequence in the LOGO exchange
  * @fp: LOGO request frame
@@ -546,7 +546,7 @@ static void fc_lport_recv_logo_req(struct fc_seq *sp, struct fc_frame *fp,
 }
 
 /**
- * fc_fabric_login - Start the lport state machine
+ * fc_fabric_login() - Start the lport state machine
  * @lport: The lport that should log into the fabric
  *
  * Locking Note: This function should not be called
@@ -568,7 +568,7 @@ int fc_fabric_login(struct fc_lport *lport)
 EXPORT_SYMBOL(fc_fabric_login);
 
 /**
- * fc_linkup - Handler for transport linkup events
+ * fc_linkup() - Handler for transport linkup events
  * @lport: The lport whose link is up
  */
 void fc_linkup(struct fc_lport *lport)
@@ -577,8 +577,8 @@ void fc_linkup(struct fc_lport *lport)
 		       fc_host_port_id(lport->host));
 
 	mutex_lock(&lport->lp_mutex);
-	if ((lport->link_status & FC_LINK_UP) != FC_LINK_UP) {
-		lport->link_status |= FC_LINK_UP;
+	if (!lport->link_up) {
+		lport->link_up = 1;
 
 		if (lport->state == LPORT_ST_RESET)
 			fc_lport_enter_flogi(lport);
@@ -588,7 +588,7 @@ void fc_linkup(struct fc_lport *lport)
 EXPORT_SYMBOL(fc_linkup);
 
 /**
- * fc_linkdown - Handler for transport linkdown events
+ * fc_linkdown() - Handler for transport linkdown events
  * @lport: The lport whose link is down
  */
 void fc_linkdown(struct fc_lport *lport)
@@ -597,8 +597,8 @@ void fc_linkdown(struct fc_lport *lport)
 	FC_DEBUG_LPORT("Link is down for port (%6x)\n",
 		       fc_host_port_id(lport->host));
 
-	if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) {
-		lport->link_status &= ~(FC_LINK_UP);
+	if (lport->link_up) {
+		lport->link_up = 0;
 		fc_lport_enter_reset(lport);
 		lport->tt.fcp_cleanup(lport);
 	}
@@ -607,48 +607,25 @@ void fc_linkdown(struct fc_lport *lport)
 EXPORT_SYMBOL(fc_linkdown);
 
 /**
- * fc_pause - Pause the flow of frames
- * @lport: The lport to be paused
- */
-void fc_pause(struct fc_lport *lport)
-{
-	mutex_lock(&lport->lp_mutex);
-	lport->link_status |= FC_PAUSE;
-	mutex_unlock(&lport->lp_mutex);
-}
-EXPORT_SYMBOL(fc_pause);
-
-/**
- * fc_unpause - Unpause the flow of frames
- * @lport: The lport to be unpaused
- */
-void fc_unpause(struct fc_lport *lport)
-{
-	mutex_lock(&lport->lp_mutex);
-	lport->link_status &= ~(FC_PAUSE);
-	mutex_unlock(&lport->lp_mutex);
-}
-EXPORT_SYMBOL(fc_unpause);
-
-/**
- * fc_fabric_logoff - Logout of the fabric
+ * fc_fabric_logoff() - Logout of the fabric
  * @lport:	      fc_lport pointer to logoff the fabric
  *
  * Return value:
  *	0 for success, -1 for failure
- **/
+ */
 int fc_fabric_logoff(struct fc_lport *lport)
 {
 	lport->tt.disc_stop_final(lport);
 	mutex_lock(&lport->lp_mutex);
 	fc_lport_enter_logo(lport);
 	mutex_unlock(&lport->lp_mutex);
+	cancel_delayed_work_sync(&lport->retry_work);
 	return 0;
 }
 EXPORT_SYMBOL(fc_fabric_logoff);
 
 /**
- * fc_lport_destroy - unregister a fc_lport
+ * fc_lport_destroy() - unregister a fc_lport
  * @lport:	      fc_lport pointer to unregister
  *
  * Return value:
@@ -658,26 +635,25 @@ EXPORT_SYMBOL(fc_fabric_logoff);
  * clean-up all the allocated memory
  * and free up other system resources.
  *
- **/
+ */
 int fc_lport_destroy(struct fc_lport *lport)
 {
 	lport->tt.frame_send = fc_frame_drop;
 	lport->tt.fcp_abort_io(lport);
-	lport->tt.exch_mgr_reset(lport->emp, 0, 0);
+	lport->tt.exch_mgr_reset(lport, 0, 0);
 	return 0;
 }
 EXPORT_SYMBOL(fc_lport_destroy);
 
 /**
- * fc_set_mfs - sets up the mfs for the corresponding fc_lport
+ * fc_set_mfs() - sets up the mfs for the corresponding fc_lport
  * @lport: fc_lport pointer to unregister
  * @mfs: the new mfs for fc_lport
  *
  * Set mfs for the given fc_lport to the new mfs.
  *
  * Return: 0 for success
- *
- **/
+ */
 int fc_set_mfs(struct fc_lport *lport, u32 mfs)
 {
 	unsigned int old_mfs;
@@ -706,7 +682,7 @@ int fc_set_mfs(struct fc_lport *lport, u32 mfs)
 EXPORT_SYMBOL(fc_set_mfs);
 
 /**
- * fc_lport_disc_callback - Callback for discovery events
+ * fc_lport_disc_callback() - Callback for discovery events
  * @lport: FC local port
  * @event: The discovery event
  */
@@ -731,7 +707,7 @@ void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event)
 }
 
 /**
- * fc_rport_enter_ready - Enter the ready state and start discovery
+ * fc_rport_enter_ready() - Enter the ready state and start discovery
  * @lport: Fibre Channel local port that is ready
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -748,7 +724,7 @@ static void fc_lport_enter_ready(struct fc_lport *lport)
 }
 
 /**
- * fc_lport_recv_flogi_req - Receive a FLOGI request
+ * fc_lport_recv_flogi_req() - Receive a FLOGI request
  * @sp_in: The sequence the FLOGI is on
  * @rx_fp: The frame the FLOGI is in
  * @lport: The lport that recieved the request
@@ -838,7 +814,7 @@ out:
 }
 
 /**
- * fc_lport_recv_req - The generic lport request handler
+ * fc_lport_recv_req() - The generic lport request handler
  * @lport: The lport that received the request
  * @sp: The sequence the request is on
  * @fp: The frame the request is in
@@ -934,7 +910,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp,
 }
 
 /**
- * fc_lport_reset - Reset an lport
+ * fc_lport_reset() - Reset an lport
  * @lport: The lport which should be reset
  *
  * Locking Note: This functions should not be called with the
@@ -942,6 +918,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp,
  */
 int fc_lport_reset(struct fc_lport *lport)
 {
+	cancel_delayed_work_sync(&lport->retry_work);
 	mutex_lock(&lport->lp_mutex);
 	fc_lport_enter_reset(lport);
 	mutex_unlock(&lport->lp_mutex);
@@ -950,7 +927,7 @@ int fc_lport_reset(struct fc_lport *lport)
 EXPORT_SYMBOL(fc_lport_reset);
 
 /**
- * fc_rport_enter_reset - Reset the local port
+ * fc_rport_enter_reset() - Reset the local port
  * @lport: Fibre Channel local port to be reset
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -973,16 +950,16 @@ static void fc_lport_enter_reset(struct fc_lport *lport)
 
 	lport->tt.disc_stop(lport);
 
-	lport->tt.exch_mgr_reset(lport->emp, 0, 0);
+	lport->tt.exch_mgr_reset(lport, 0, 0);
 	fc_host_fabric_name(lport->host) = 0;
 	fc_host_port_id(lport->host) = 0;
 
-	if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP)
+	if (lport->link_up)
 		fc_lport_enter_flogi(lport);
 }
 
 /**
- * fc_lport_error - Handler for any errors
+ * fc_lport_error() - Handler for any errors
  * @lport: The fc_lport object
  * @fp: The frame pointer
  *
@@ -1029,8 +1006,8 @@ static void fc_lport_error(struct fc_lport *lport, struct fc_frame *fp)
 }
 
 /**
- * fc_lport_rft_id_resp - Handle response to Register Fibre
- *			  Channel Types by ID (RPN_ID) request
+ * fc_lport_rft_id_resp() - Handle response to Register Fibre
+ *			    Channel Types by ID (RPN_ID) request
  * @sp: current sequence in RPN_ID exchange
  * @fp: response frame
  * @lp_arg: Fibre Channel host port instance
@@ -1053,17 +1030,17 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a RFT_ID response\n");
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	if (lport->state != LPORT_ST_RFT_ID) {
 		FC_DBG("Received a RFT_ID response, but in state %s\n",
 		       fc_lport_state(lport));
 		goto out;
 	}
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	fh = fc_frame_header_get(fp);
 	ct = fc_frame_payload_get(fp, sizeof(*ct));
 
@@ -1081,8 +1058,8 @@ err:
 }
 
 /**
- * fc_lport_rpn_id_resp - Handle response to Register Port
- *			  Name by ID (RPN_ID) request
+ * fc_lport_rpn_id_resp() - Handle response to Register Port
+ *			    Name by ID (RPN_ID) request
  * @sp: current sequence in RPN_ID exchange
  * @fp: response frame
  * @lp_arg: Fibre Channel host port instance
@@ -1105,17 +1082,17 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a RPN_ID response\n");
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	if (lport->state != LPORT_ST_RPN_ID) {
 		FC_DBG("Received a RPN_ID response, but in state %s\n",
 		       fc_lport_state(lport));
 		goto out;
 	}
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	fh = fc_frame_header_get(fp);
 	ct = fc_frame_payload_get(fp, sizeof(*ct));
 	if (fh && ct && fh->fh_type == FC_TYPE_CT &&
@@ -1133,7 +1110,7 @@ err:
 }
 
 /**
- * fc_lport_scr_resp - Handle response to State Change Register (SCR) request
+ * fc_lport_scr_resp() - Handle response to State Change Register (SCR) request
  * @sp: current sequence in SCR exchange
  * @fp: response frame
  * @lp_arg: Fibre Channel lport port instance that sent the registration request
@@ -1155,17 +1132,17 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a SCR response\n");
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	if (lport->state != LPORT_ST_SCR) {
 		FC_DBG("Received a SCR response, but in state %s\n",
 		       fc_lport_state(lport));
 		goto out;
 	}
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC)
 		fc_lport_enter_ready(lport);
@@ -1179,7 +1156,7 @@ err:
 }
 
 /**
- * fc_lport_enter_scr - Send a State Change Register (SCR) request
+ * fc_lport_enter_scr() - Send a State Change Register (SCR) request
  * @lport: Fibre Channel local port to register for state changes
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -1206,7 +1183,7 @@ static void fc_lport_enter_scr(struct fc_lport *lport)
 }
 
 /**
- * fc_lport_enter_rft_id - Register FC4-types with the name server
+ * fc_lport_enter_rft_id() - Register FC4-types with the name server
  * @lport: Fibre Channel local port to register
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -1248,7 +1225,7 @@ static void fc_lport_enter_rft_id(struct fc_lport *lport)
 }
 
 /**
- * fc_rport_enter_rft_id - Register port name with the name server
+ * fc_rport_enter_rft_id() - Register port name with the name server
  * @lport: Fibre Channel local port to register
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -1281,7 +1258,7 @@ static struct fc_rport_operations fc_lport_rport_ops = {
 };
 
 /**
- * fc_rport_enter_dns - Create a rport to the name server
+ * fc_rport_enter_dns() - Create a rport to the name server
  * @lport: Fibre Channel local port requesting a rport for the name server
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -1304,7 +1281,7 @@ static void fc_lport_enter_dns(struct fc_lport *lport)
 
 	fc_lport_state_enter(lport, LPORT_ST_DNS);
 
-	rport = fc_rport_rogue_create(&dp);
+	rport = lport->tt.rport_create(&dp);
 	if (!rport)
 		goto err;
 
@@ -1318,7 +1295,7 @@ err:
 }
 
 /**
- * fc_lport_timeout - Handler for the retry_work timer.
+ * fc_lport_timeout() - Handler for the retry_work timer.
  * @work: The work struct of the fc_lport
  */
 static void fc_lport_timeout(struct work_struct *work)
@@ -1359,7 +1336,7 @@ static void fc_lport_timeout(struct work_struct *work)
 }
 
 /**
- * fc_lport_logo_resp - Handle response to LOGO request
+ * fc_lport_logo_resp() - Handle response to LOGO request
  * @sp: current sequence in LOGO exchange
  * @fp: response frame
  * @lp_arg: Fibre Channel lport port instance that sent the LOGO request
@@ -1381,17 +1358,17 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a LOGO response\n");
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	if (lport->state != LPORT_ST_LOGO) {
 		FC_DBG("Received a LOGO response, but in state %s\n",
 		       fc_lport_state(lport));
 		goto out;
 	}
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC)
 		fc_lport_enter_reset(lport);
@@ -1405,7 +1382,7 @@ err:
 }
 
 /**
- * fc_rport_enter_logo - Logout of the fabric
+ * fc_rport_enter_logo() - Logout of the fabric
  * @lport: Fibre Channel local port to be logged out
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -1437,7 +1414,7 @@ static void fc_lport_enter_logo(struct fc_lport *lport)
 }
 
 /**
- * fc_lport_flogi_resp - Handle response to FLOGI request
+ * fc_lport_flogi_resp() - Handle response to FLOGI request
  * @sp: current sequence in FLOGI exchange
  * @fp: response frame
  * @lp_arg: Fibre Channel lport port instance that sent the FLOGI request
@@ -1465,17 +1442,17 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a FLOGI response\n");
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	if (lport->state != LPORT_ST_FLOGI) {
 		FC_DBG("Received a FLOGI response, but in state %s\n",
 		       fc_lport_state(lport));
 		goto out;
 	}
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	fh = fc_frame_header_get(fp);
 	did = ntoh24(fh->fh_d_id);
 	if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
@@ -1532,7 +1509,7 @@ err:
 }
 
 /**
- * fc_rport_enter_flogi - Send a FLOGI request to the fabric manager
+ * fc_rport_enter_flogi() - Send a FLOGI request to the fabric manager
  * @lport: Fibre Channel local port to be logged in to the fabric
  *
  * Locking Note: The lport lock is expected to be held before calling
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index e780d8caf70..dae65133a83 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -81,6 +81,7 @@ static void fc_rport_recv_logo_req(struct fc_rport *,
 				   struct fc_seq *, struct fc_frame *);
 static void fc_rport_timeout(struct work_struct *);
 static void fc_rport_error(struct fc_rport *, struct fc_frame *);
+static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *);
 static void fc_rport_work(struct work_struct *);
 
 static const char *fc_rport_state_names[] = {
@@ -145,7 +146,7 @@ struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *dp)
 }
 
 /**
- * fc_rport_state - return a string for the state the rport is in
+ * fc_rport_state() - return a string for the state the rport is in
  * @rport: The rport whose state we want to get a string for
  */
 static const char *fc_rport_state(struct fc_rport *rport)
@@ -160,7 +161,7 @@ static const char *fc_rport_state(struct fc_rport *rport)
 }
 
 /**
- * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds.
+ * fc_set_rport_loss_tmo() - Set the remote port loss timeout in seconds.
  * @rport: Pointer to Fibre Channel remote port structure
  * @timeout: timeout in seconds
  */
@@ -174,12 +175,12 @@ void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
 EXPORT_SYMBOL(fc_set_rport_loss_tmo);
 
 /**
- * fc_plogi_get_maxframe - Get max payload from the common service parameters
+ * fc_plogi_get_maxframe() - Get max payload from the common service parameters
  * @flp: FLOGI payload structure
  * @maxval: upper limit, may be less than what is in the service parameters
  */
-static unsigned int
-fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval)
+static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
+					  unsigned int maxval)
 {
 	unsigned int mfs;
 
@@ -197,7 +198,7 @@ fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval)
 }
 
 /**
- * fc_rport_state_enter - Change the rport's state
+ * fc_rport_state_enter() - Change the rport's state
  * @rport: The rport whose state should change
  * @new: The new state of the rport
  *
@@ -214,6 +215,7 @@ static void fc_rport_state_enter(struct fc_rport *rport,
 
 static void fc_rport_work(struct work_struct *work)
 {
+	u32 port_id;
 	struct fc_rport_libfc_priv *rdata =
 		container_of(work, struct fc_rport_libfc_priv, event_work);
 	enum fc_rport_event event;
@@ -279,14 +281,18 @@ static void fc_rport_work(struct work_struct *work)
 			rport_ops->event_callback(lport, rport, event);
 		if (trans_state == FC_PORTSTATE_ROGUE)
 			put_device(&rport->dev);
-		else
+		else {
+			port_id = rport->port_id;
 			fc_remote_port_delete(rport);
+			lport->tt.exch_mgr_reset(lport, 0, port_id);
+			lport->tt.exch_mgr_reset(lport, port_id, 0);
+		}
 	} else
 		mutex_unlock(&rdata->rp_mutex);
 }
 
 /**
- * fc_rport_login - Start the remote port login state machine
+ * fc_rport_login() - Start the remote port login state machine
  * @rport: Fibre Channel remote port
  *
  * Locking Note: Called without the rport lock held. This
@@ -309,7 +315,7 @@ int fc_rport_login(struct fc_rport *rport)
 }
 
 /**
- * fc_rport_logoff - Logoff and remove an rport
+ * fc_rport_logoff() - Logoff and remove an rport
  * @rport: Fibre Channel remote port to be removed
  *
  * Locking Note: Called without the rport lock held. This
@@ -347,7 +353,7 @@ int fc_rport_logoff(struct fc_rport *rport)
 }
 
 /**
- * fc_rport_enter_ready - The rport is ready
+ * fc_rport_enter_ready() - The rport is ready
  * @rport: Fibre Channel remote port that is ready
  *
  * Locking Note: The rport lock is expected to be held before calling
@@ -366,7 +372,7 @@ static void fc_rport_enter_ready(struct fc_rport *rport)
 }
 
 /**
- * fc_rport_timeout - Handler for the retry_work timer.
+ * fc_rport_timeout() - Handler for the retry_work timer.
  * @work: The work struct of the fc_rport_libfc_priv
  *
  * Locking Note: Called without the rport lock held. This
@@ -405,59 +411,75 @@ static void fc_rport_timeout(struct work_struct *work)
 }
 
 /**
- * fc_rport_error - Handler for any errors
+ * fc_rport_error() - Error handler, called once retries have been exhausted
  * @rport: The fc_rport object
  * @fp: The frame pointer
  *
- * If the error was caused by a resource allocation failure
- * then wait for half a second and retry, otherwise retry
- * immediately.
- *
  * Locking Note: The rport lock is expected to be held before
  * calling this routine
  */
 static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp)
 {
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
-	unsigned long delay = 0;
 
 	FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n",
 		       PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
 
-	if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
-		/*
-		 * Memory allocation failure, or the exchange timed out.
-		 *  Retry after delay
-		 */
-		if (rdata->retries < rdata->local_port->max_retry_count) {
-			rdata->retries++;
-			if (!fp)
-				delay = msecs_to_jiffies(500);
-			get_device(&rport->dev);
-			schedule_delayed_work(&rdata->retry_work, delay);
-		} else {
-			switch (rdata->rp_state) {
-			case RPORT_ST_PLOGI:
-			case RPORT_ST_PRLI:
-			case RPORT_ST_LOGO:
-				rdata->event = RPORT_EV_FAILED;
-				queue_work(rport_event_queue,
-					   &rdata->event_work);
-				break;
-			case RPORT_ST_RTV:
-				fc_rport_enter_ready(rport);
-				break;
-			case RPORT_ST_NONE:
-			case RPORT_ST_READY:
-			case RPORT_ST_INIT:
-				break;
-			}
-		}
+	switch (rdata->rp_state) {
+	case RPORT_ST_PLOGI:
+	case RPORT_ST_PRLI:
+	case RPORT_ST_LOGO:
+		rdata->event = RPORT_EV_FAILED;
+		queue_work(rport_event_queue,
+			   &rdata->event_work);
+		break;
+	case RPORT_ST_RTV:
+		fc_rport_enter_ready(rport);
+		break;
+	case RPORT_ST_NONE:
+	case RPORT_ST_READY:
+	case RPORT_ST_INIT:
+		break;
 	}
 }
 
 /**
- * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response
+ * fc_rport_error_retry() - Error handler when retries are desired
+ * @rport: The fc_rport object
+ * @fp: The frame pointer
+ *
+ * If the error was an exchange timeout retry immediately,
+ * otherwise wait for E_D_TOV.
+ *
+ * Locking Note: The rport lock is expected to be held before
+ * calling this routine
+ */
+static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp)
+{
+	struct fc_rport_libfc_priv *rdata = rport->dd_data;
+	unsigned long delay = FC_DEF_E_D_TOV;
+
+	/* make sure this isn't an FC_EX_CLOSED error, never retry those */
+	if (PTR_ERR(fp) == -FC_EX_CLOSED)
+		return fc_rport_error(rport, fp);
+
+	if (rdata->retries < rdata->local_port->max_retry_count) {
+		FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
+			       PTR_ERR(fp), fc_rport_state(rport));
+		rdata->retries++;
+		/* no additional delay on exchange timeouts */
+		if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
+			delay = 0;
+		get_device(&rport->dev);
+		schedule_delayed_work(&rdata->retry_work, delay);
+		return;
+	}
+
+	return fc_rport_error(rport, fp);
+}
+
+/**
+ * fc_rport_plogi_recv_resp() - Handle incoming ELS PLOGI response
  * @sp: current sequence in the PLOGI exchange
  * @fp: response frame
  * @rp_arg: Fibre Channel remote port
@@ -483,17 +505,17 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 	FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
 		       rport->port_id);
 
+	if (IS_ERR(fp)) {
+		fc_rport_error_retry(rport, fp);
+		goto err;
+	}
+
 	if (rdata->rp_state != RPORT_ST_PLOGI) {
 		FC_DBG("Received a PLOGI response, but in state %s\n",
 		       fc_rport_state(rport));
 		goto out;
 	}
 
-	if (IS_ERR(fp)) {
-		fc_rport_error(rport, fp);
-		goto err;
-	}
-
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC &&
 	    (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
@@ -522,7 +544,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 		else
 			fc_rport_enter_prli(rport);
 	} else
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 
 out:
 	fc_frame_free(fp);
@@ -532,7 +554,7 @@ err:
 }
 
 /**
- * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer
+ * fc_rport_enter_plogi() - Send Port Login (PLOGI) request to peer
  * @rport: Fibre Channel remote port to send PLOGI to
  *
  * Locking Note: The rport lock is expected to be held before calling
@@ -552,20 +574,20 @@ static void fc_rport_enter_plogi(struct fc_rport *rport)
 	rport->maxframe_size = FC_MIN_MAX_PAYLOAD;
 	fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
 	if (!fp) {
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 		return;
 	}
 	rdata->e_d_tov = lport->e_d_tov;
 
 	if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI,
 				  fc_rport_plogi_resp, rport, lport->e_d_tov))
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 	else
 		get_device(&rport->dev);
 }
 
 /**
- * fc_rport_prli_resp - Process Login (PRLI) response handler
+ * fc_rport_prli_resp() - Process Login (PRLI) response handler
  * @sp: current sequence in the PRLI exchange
  * @fp: response frame
  * @rp_arg: Fibre Channel remote port
@@ -592,17 +614,17 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 	FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
 		       rport->port_id);
 
+	if (IS_ERR(fp)) {
+		fc_rport_error_retry(rport, fp);
+		goto err;
+	}
+
 	if (rdata->rp_state != RPORT_ST_PRLI) {
 		FC_DBG("Received a PRLI response, but in state %s\n",
 		       fc_rport_state(rport));
 		goto out;
 	}
 
-	if (IS_ERR(fp)) {
-		fc_rport_error(rport, fp);
-		goto err;
-	}
-
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC) {
 		pp = fc_frame_payload_get(fp, sizeof(*pp));
@@ -635,7 +657,7 @@ err:
 }
 
 /**
- * fc_rport_logo_resp - Logout (LOGO) response handler
+ * fc_rport_logo_resp() - Logout (LOGO) response handler
  * @sp: current sequence in the LOGO exchange
  * @fp: response frame
  * @rp_arg: Fibre Channel remote port
@@ -657,7 +679,7 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 		       rport->port_id);
 
 	if (IS_ERR(fp)) {
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 		goto err;
 	}
 
@@ -684,7 +706,7 @@ err:
 }
 
 /**
- * fc_rport_enter_prli - Send Process Login (PRLI) request to peer
+ * fc_rport_enter_prli() - Send Process Login (PRLI) request to peer
  * @rport: Fibre Channel remote port to send PRLI to
  *
  * Locking Note: The rport lock is expected to be held before calling
@@ -707,19 +729,19 @@ static void fc_rport_enter_prli(struct fc_rport *rport)
 
 	fp = fc_frame_alloc(lport, sizeof(*pp));
 	if (!fp) {
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 		return;
 	}
 
 	if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI,
 				  fc_rport_prli_resp, rport, lport->e_d_tov))
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 	else
 		get_device(&rport->dev);
 }
 
 /**
- * fc_rport_els_rtv_resp - Request Timeout Value response handler
+ * fc_rport_els_rtv_resp() - Request Timeout Value response handler
  * @sp: current sequence in the RTV exchange
  * @fp: response frame
  * @rp_arg: Fibre Channel remote port
@@ -742,17 +764,17 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
 	FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
 		       rport->port_id);
 
+	if (IS_ERR(fp)) {
+		fc_rport_error(rport, fp);
+		goto err;
+	}
+
 	if (rdata->rp_state != RPORT_ST_RTV) {
 		FC_DBG("Received a RTV response, but in state %s\n",
 		       fc_rport_state(rport));
 		goto out;
 	}
 
-	if (IS_ERR(fp)) {
-		fc_rport_error(rport, fp);
-		goto err;
-	}
-
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC) {
 		struct fc_els_rtv_acc *rtv;
@@ -785,7 +807,7 @@ err:
 }
 
 /**
- * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer
+ * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request to peer
  * @rport: Fibre Channel remote port to send RTV to
  *
  * Locking Note: The rport lock is expected to be held before calling
@@ -804,19 +826,19 @@ static void fc_rport_enter_rtv(struct fc_rport *rport)
 
 	fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
 	if (!fp) {
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 		return;
 	}
 
 	if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV,
 				     fc_rport_rtv_resp, rport, lport->e_d_tov))
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 	else
 		get_device(&rport->dev);
 }
 
 /**
- * fc_rport_enter_logo - Send Logout (LOGO) request to peer
+ * fc_rport_enter_logo() - Send Logout (LOGO) request to peer
  * @rport: Fibre Channel remote port to send LOGO to
  *
  * Locking Note: The rport lock is expected to be held before calling
@@ -835,20 +857,20 @@ static void fc_rport_enter_logo(struct fc_rport *rport)
 
 	fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
 	if (!fp) {
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 		return;
 	}
 
 	if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO,
 				  fc_rport_logo_resp, rport, lport->e_d_tov))
-		fc_rport_error(rport, fp);
+		fc_rport_error_retry(rport, fp);
 	else
 		get_device(&rport->dev);
 }
 
 
 /**
- * fc_rport_recv_req - Receive a request from a rport
+ * fc_rport_recv_req() - Receive a request from a rport
  * @sp: current sequence in the PLOGI exchange
  * @fp: response frame
  * @rp_arg: Fibre Channel remote port
@@ -909,7 +931,7 @@ void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp,
 }
 
 /**
- * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request
+ * fc_rport_recv_plogi_req() - Handle incoming Port Login (PLOGI) request
  * @rport: Fibre Channel remote port that initiated PLOGI
  * @sp: current sequence in the PLOGI exchange
  * @fp: PLOGI request frame
@@ -1031,7 +1053,7 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport,
 }
 
 /**
- * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request
+ * fc_rport_recv_prli_req() - Handle incoming Process Login (PRLI) request
  * @rport: Fibre Channel remote port that initiated PRLI
  * @sp: current sequence in the PRLI exchange
  * @fp: PRLI request frame
@@ -1182,7 +1204,7 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport,
 }
 
 /**
- * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request
+ * fc_rport_recv_prlo_req() - Handle incoming Process Logout (PRLO) request
  * @rport: Fibre Channel remote port that initiated PRLO
  * @sp: current sequence in the PRLO exchange
  * @fp: PRLO request frame
@@ -1213,7 +1235,7 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp,
 }
 
 /**
- * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request
+ * fc_rport_recv_logo_req() - Handle incoming Logout (LOGO) request
  * @rport: Fibre Channel remote port that initiated LOGO
  * @sp: current sequence in the LOGO exchange
  * @fp: LOGO request frame
@@ -1249,6 +1271,9 @@ static void fc_rport_flush_queue(void)
 
 int fc_rport_init(struct fc_lport *lport)
 {
+	if (!lport->tt.rport_create)
+		lport->tt.rport_create = fc_rport_rogue_create;
+
 	if (!lport->tt.rport_login)
 		lport->tt.rport_login = fc_rport_login;
 
@@ -1285,7 +1310,7 @@ void fc_rport_terminate_io(struct fc_rport *rport)
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
 	struct fc_lport *lport = rdata->local_port;
 
-	lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id);
-	lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0);
+	lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
+	lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
 }
 EXPORT_SYMBOL(fc_rport_terminate_io);
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index f4c57227ec1..ee9d4015243 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -244,12 +244,6 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj,
 		if (ha->optrom_state != QLA_SWAITING)
 			break;
 
-		if (start & 0xfff) {
-			qla_printk(KERN_WARNING, ha,
-			    "Invalid start region 0x%x/0x%x.\n", start, size);
-			return -EINVAL;
-		}
-
 		ha->optrom_region_start = start;
 		ha->optrom_region_size = start + size > ha->optrom_size ?
 		    ha->optrom_size - start : size;
@@ -303,8 +297,7 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj,
 		else if (start == (ha->flt_region_boot * 4) ||
 		    start == (ha->flt_region_fw * 4))
 			valid = 1;
-		else if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) &&
-		    start == (ha->flt_region_vpd_nvram * 4))
+		else if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
 		    valid = 1;
 		if (!valid) {
 			qla_printk(KERN_WARNING, ha,
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 986501759ad..87f9abc7146 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1308,8 +1308,12 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 
 	DEBUG(printk("scsi(%ld): Issue init firmware.\n", vha->host_no));
 
-	if (ha->flags.npiv_supported)
+	if (ha->flags.npiv_supported) {
+		if (ha->operating_mode == LOOP)
+			ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1;
 		mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+	}
+
 
 	mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
 
@@ -2610,6 +2614,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
 	port_id_t	wrap, nxt_d_id;
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev);
+	struct scsi_qla_host *tvp;
 
 	rval = QLA_SUCCESS;
 
@@ -2709,7 +2714,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
 		/* Bypass virtual ports of the same host. */
 		found = 0;
 		if (ha->num_vhosts) {
-			list_for_each_entry(vp, &ha->vp_list, list) {
+			list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
 				if (new_fcport->d_id.b24 == vp->d_id.b24) {
 					found = 1;
 					break;
@@ -2832,6 +2837,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
 	uint16_t first_loop_id;
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *vp;
+	struct scsi_qla_host *tvp;
 
 	rval = QLA_SUCCESS;
 
@@ -2856,7 +2862,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
 		/* Check for loop ID being already in use. */
 		found = 0;
 		fcport = NULL;
-		list_for_each_entry(vp, &ha->vp_list, list) {
+		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
 			list_for_each_entry(fcport, &vp->vp_fcports, list) {
 				if (fcport->loop_id == dev->loop_id &&
 								fcport != dev) {
@@ -3291,6 +3297,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 	uint8_t        status = 0;
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *vp;
+	struct scsi_qla_host *tvp;
 	struct req_que *req = ha->req_q_map[0];
 
 	if (vha->flags.online) {
@@ -3306,7 +3313,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 		if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
 			atomic_set(&vha->loop_state, LOOP_DOWN);
 			qla2x00_mark_all_devices_lost(vha, 0);
-			list_for_each_entry(vp, &ha->vp_list, list)
+			list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
 			       qla2x00_mark_all_devices_lost(vp, 0);
 		} else {
 			if (!atomic_read(&vha->loop_down_timer))
@@ -3403,7 +3410,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 		DEBUG(printk(KERN_INFO
 				"qla2x00_abort_isp(%ld): succeeded.\n",
 				vha->host_no));
-		list_for_each_entry(vp, &ha->vp_list, list) {
+		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
 			if (vp->vp_idx)
 				qla2x00_vp_abort_isp(vp);
 		}
@@ -3428,7 +3435,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 static int
 qla2x00_restart_isp(scsi_qla_host_t *vha)
 {
-	uint8_t		status = 0;
+	int status = 0;
 	uint32_t wait_time;
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 4c7504cb399..4aab7acf752 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2685,6 +2685,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 	uint16_t stat = le16_to_cpu(rptid_entry->vp_idx);
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *vp;
+	scsi_qla_host_t *tvp;
 
 	if (rptid_entry->entry_status != 0)
 		return;
@@ -2710,7 +2711,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 		if (MSB(stat) == 1)
 			return;
 
-		list_for_each_entry(vp, &ha->vp_list, list)
+		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
 			if (vp_idx == vp->vp_idx)
 				break;
 		if (!vp)
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 3f23932210c..785c61279e6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -69,9 +69,10 @@ static scsi_qla_host_t *
 qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name)
 {
 	scsi_qla_host_t *vha;
+	struct scsi_qla_host *tvha;
 
 	/* Locate matching device in database. */
-	list_for_each_entry(vha, &ha->vp_list, list) {
+	list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
 		if (!memcmp(port_name, vha->port_name, WWN_SIZE))
 			return vha;
 	}
@@ -194,11 +195,11 @@ qla24xx_configure_vp(scsi_qla_host_t *vha)
 void
 qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
 {
-	scsi_qla_host_t *vha;
+	scsi_qla_host_t *vha, *tvha;
 	struct qla_hw_data *ha = rsp->hw;
 	int i = 0;
 
-	list_for_each_entry(vha, &ha->vp_list, list) {
+	list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
 		if (vha->vp_idx) {
 			switch (mb[0]) {
 			case MBA_LIP_OCCURRED:
@@ -300,6 +301,7 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha)
 	int ret;
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *vp;
+	struct scsi_qla_host *tvp;
 
 	if (vha->vp_idx)
 		return;
@@ -308,7 +310,7 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha)
 
 	clear_bit(VP_DPC_NEEDED, &vha->dpc_flags);
 
-	list_for_each_entry(vp, &ha->vp_list, list) {
+	list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
 		if (vp->vp_idx)
 			ret = qla2x00_do_dpc_vp(vp);
 	}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 2f5f72531e2..3ddfa889e94 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2222,10 +2222,6 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
 {
 	char	name[16];
 
-	ha->init_cb_size = sizeof(init_cb_t);
-	if (IS_QLA2XXX_MIDTYPE(ha))
-		ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
-
 	ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
 		&ha->init_cb_dma, GFP_KERNEL);
 	if (!ha->init_cb)
@@ -2568,7 +2564,7 @@ qla2x00_do_work(struct scsi_qla_host *vha)
 void qla2x00_relogin(struct scsi_qla_host *vha)
 {
 	fc_port_t       *fcport;
-	uint8_t         status;
+	int status;
 	uint16_t        next_loopid = 0;
 	struct qla_hw_data *ha = vha->hw;
 
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 79f7053da99..a772eab2f0e 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.00-k3"
+#define QLA2XXX_VERSION      "8.03.00-k4"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 55310dbc10a..4970ae4a62d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1167,23 +1167,19 @@ sd_spinup_disk(struct scsi_disk *sdkp)
 		/*
 		 * The device does not want the automatic start to be issued.
 		 */
-		if (sdkp->device->no_start_on_add) {
+		if (sdkp->device->no_start_on_add)
 			break;
-		}
-
-		/*
-		 * If manual intervention is required, or this is an
-		 * absent USB storage device, a spinup is meaningless.
-		 */
-		if (sense_valid &&
-		    sshdr.sense_key == NOT_READY &&
-		    sshdr.asc == 4 && sshdr.ascq == 3) {
-			break;		/* manual intervention required */
 
-		/*
-		 * Issue command to spin up drive when not ready
-		 */
-		} else if (sense_valid && sshdr.sense_key == NOT_READY) {
+		if (sense_valid && sshdr.sense_key == NOT_READY) {
+			if (sshdr.asc == 4 && sshdr.ascq == 3)
+				break;	/* manual intervention required */
+			if (sshdr.asc == 4 && sshdr.ascq == 0xb)
+				break;	/* standby */
+			if (sshdr.asc == 4 && sshdr.ascq == 0xc)
+				break;	/* unavailable */
+			/*
+			 * Issue command to spin up drive when not ready
+			 */
 			if (!spintime) {
 				sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
 				cmd[0] = START_STOP;
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index a8d61a62522..97f3158fa7b 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -137,7 +137,7 @@ zalon_probe(struct parisc_device *dev)
 		goto fail;
 
 	if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
-	  dev_printk(KERN_ERR, dev, "irq problem with %d, detaching\n ",
+	  dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
 		     dev->irq);
 		goto fail;
 	}
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index f31c6698419..cb6d85d7ff4 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -14,8 +14,8 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/dec21285.h>
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 7d7f576da20..9be11b0963f 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -628,7 +628,7 @@ config SERIAL_MPSC_CONSOLE
 
 config SERIAL_PXA
 	bool "PXA serial port support"
-	depends on ARM && ARCH_PXA
+	depends on ARCH_PXA || ARCH_MMP
 	select SERIAL_CORE
 	help
 	  If you have a machine based on an Intel XScale PXA2xx CPU you
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 459f3420a42..80e76426131 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -38,9 +38,9 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware/clps7111.h>
 
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index a50954612b6..9f460b175c5 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1129,7 +1129,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 	sport->timer.function = imx_timeout;
 	sport->timer.data     = (unsigned long)sport;
 
-	sport->clk = clk_get(&pdev->dev, "uart_clk");
+	sport->clk = clk_get(&pdev->dev, "uart");
 	if (IS_ERR(sport->clk)) {
 		ret = PTR_ERR(sport->clk);
 		goto unmap;
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f6e3b86bb0b..a48a8a13d87 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -43,13 +43,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/clk.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/regs-uart.h>
-
+#include <linux/io.h>
 
 struct uart_pxa_port {
 	struct uart_port        port;
@@ -491,7 +485,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * Ensure the port will be enabled.
 	 * This is required especially for serial console.
 	 */
-	up->ier |= IER_UUE;
+	up->ier |= UART_IER_UUE;
 
 	/*
 	 * Update the per-port timeout.
@@ -784,19 +778,15 @@ static int serial_pxa_probe(struct platform_device *dev)
 	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
-	/*
-	 * Is it worth keeping this?
-	 */
-	if (mmres->start == __PREG(FFUART))
-		sport->name = "FFUART";
-	else if (mmres->start == __PREG(BTUART))
-		sport->name = "BTUART";
-	else if (mmres->start == __PREG(STUART))
-		sport->name = "STUART";
-	else if (mmres->start == __PREG(HWUART))
-		sport->name = "HWUART";
-	else
+	switch (dev->id) {
+	case 0: sport->name = "FFUART"; break;
+	case 1: sport->name = "BTUART"; break;
+	case 2: sport->name = "STUART"; break;
+	case 3: sport->name = "HWUART"; break;
+	default:
 		sport->name = "???";
+		break;
+	}
 
 	sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
 	if (!sport->port.membase) {
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index b24a25ea6bc..94530f01521 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -36,8 +36,8 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/mach/serial_sa1100.h>
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 454a2712e62..b91ee1ae975 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -1021,13 +1021,13 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
 	spin_lock_init(&mcspi->lock);
 	INIT_LIST_HEAD(&mcspi->msg_queue);
 
-	mcspi->ick = clk_get(&pdev->dev, "mcspi_ick");
+	mcspi->ick = clk_get(&pdev->dev, "ick");
 	if (IS_ERR(mcspi->ick)) {
 		dev_dbg(&pdev->dev, "can't get mcspi_ick\n");
 		status = PTR_ERR(mcspi->ick);
 		goto err1a;
 	}
-	mcspi->fck = clk_get(&pdev->dev, "mcspi_fck");
+	mcspi->fck = clk_get(&pdev->dev, "fck");
 	if (IS_ERR(mcspi->fck)) {
 		dev_dbg(&pdev->dev, "can't get mcspi_fck\n");
 		status = PTR_ERR(mcspi->fck);
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index bab6ff061e9..394b616eafe 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -506,11 +506,12 @@ static int __init uwire_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(&pdev->dev, uwire);
 
-	uwire->ck = clk_get(&pdev->dev, "armxor_ck");
-	if (!uwire->ck || IS_ERR(uwire->ck)) {
-		dev_dbg(&pdev->dev, "no mpu_xor_clk ?\n");
+	uwire->ck = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(uwire->ck)) {
+		status = PTR_ERR(uwire->ck);
+		dev_dbg(&pdev->dev, "no functional clock?\n");
 		spi_master_put(master);
-		return -ENODEV;
+		return status;
 	}
 	clk_enable(uwire->ck);
 
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index d0fc4ca2f65..d22fac27219 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -34,8 +34,6 @@
 #include <asm/delay.h>
 
 #include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-ssp.h>
 #include <mach/ssp.h>
 #include <mach/pxa2xx_spi.h>
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index ce6badded47..211af86a6c5 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -73,8 +73,6 @@ source "drivers/staging/rt2860/Kconfig"
 
 source "drivers/staging/rt2870/Kconfig"
 
-source "drivers/staging/benet/Kconfig"
-
 source "drivers/staging/comedi/Kconfig"
 
 source "drivers/staging/asus_oled/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 9ddcc2bb336..47a56f5ffab 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_AGNX)		+= agnx/
 obj-$(CONFIG_OTUS)		+= otus/
 obj-$(CONFIG_RT2860)		+= rt2860/
 obj-$(CONFIG_RT2870)		+= rt2870/
-obj-$(CONFIG_BENET)		+= benet/
 obj-$(CONFIG_COMEDI)		+= comedi/
 obj-$(CONFIG_ASUS_OLED)		+= asus_oled/
 obj-$(CONFIG_PANEL)		+= panel/
diff --git a/drivers/staging/benet/Kconfig b/drivers/staging/benet/Kconfig
deleted file mode 100644
index f6806074f99..00000000000
--- a/drivers/staging/benet/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-config BENET
-	tristate "ServerEngines 10Gb NIC - BladeEngine"
-	depends on PCI && INET
-	select INET_LRO
-	help
-	  This driver implements the NIC functionality for ServerEngines
-	  10Gb network adapter BladeEngine (EC 3210).
diff --git a/drivers/staging/benet/MAINTAINERS b/drivers/staging/benet/MAINTAINERS
deleted file mode 100644
index d5ce340218b..00000000000
--- a/drivers/staging/benet/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SERVER ENGINES 10Gbe NIC - BLADE-ENGINE
-P:	Subbu Seetharaman
-M:	subbus@serverengines.com
-L:	netdev@vger.kernel.org
-W:	http://www.serverengines.com
-S:	Supported
diff --git a/drivers/staging/benet/Makefile b/drivers/staging/benet/Makefile
deleted file mode 100644
index 460b923b99b..00000000000
--- a/drivers/staging/benet/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile to build the network driver for ServerEngine's BladeEngine
-#
-obj-$(CONFIG_BENET) += benet.o
-
-benet-y :=  be_init.o \
-			be_int.o \
-			be_netif.o \
-			be_ethtool.o \
-			funcobj.o \
-			cq.o \
-			eq.o \
-			mpu.o \
-			eth.o
diff --git a/drivers/staging/benet/TODO b/drivers/staging/benet/TODO
deleted file mode 100644
index a51dfb59a62..00000000000
--- a/drivers/staging/benet/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-TODO:
-	- remove wrappers around common iowrite functions
-	- full netdev audit of common problems/issues
-
-Please send all patches and questions to Subbu Seetharaman
-<subbus@serverengines.com> and Greg Kroah-Hartman <greg@kroah.com>
diff --git a/drivers/staging/benet/asyncmesg.h b/drivers/staging/benet/asyncmesg.h
deleted file mode 100644
index d1e779adb84..00000000000
--- a/drivers/staging/benet/asyncmesg.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __asyncmesg_amap_h__
-#define __asyncmesg_amap_h__
-#include "fwcmd_common.h"
-
-/* --- ASYNC_EVENT_CODES --- */
-#define ASYNC_EVENT_CODE_LINK_STATE     (1)
-#define ASYNC_EVENT_CODE_ISCSI          (2)
-
-/* --- ASYNC_LINK_STATES --- */
-#define ASYNC_EVENT_LINK_DOWN           (0)	/* Link Down on a port */
-#define ASYNC_EVENT_LINK_UP             (1)	/* Link Up on a port */
-
-/*
- * The last 4 bytes of the async events have this common format.  It allows
- * the driver to distinguish [link]MCC_CQ_ENTRY[/link] structs from
- * asynchronous events.  Both arrive on the same completion queue.  This
- * structure also contains the common fields used to decode the async event.
- */
-struct BE_ASYNC_EVENT_TRAILER_AMAP {
-	u8 rsvd0[8];	/* DWORD 0 */
-	u8 event_code[8];	/* DWORD 0 */
-	u8 event_type[8];	/* DWORD 0 */
-	u8 rsvd1[6];	/* DWORD 0 */
-	u8 async_event;	/* DWORD 0 */
-	u8 valid;		/* DWORD 0 */
-} __packed;
-struct ASYNC_EVENT_TRAILER_AMAP {
-	u32 dw[1];
-};
-
-/*
- * Applicable in Initiator, Target and NIC modes.
- * A link state async event is seen by all device drivers as soon they
- * create an MCC ring. Thereafter, anytime the link status changes the
- * drivers will receive a link state async event. Notifications continue to
- * be sent until a driver destroys its MCC ring. A link down event is
- * reported when either port loses link. A link up event is reported
- * when either port regains link. When BE's failover mechanism is enabled, a
- * link down on the active port causes traffic to be diverted to the standby
- * port by the BE's ARM firmware (assuming the standby port has link). In
- * this case, the standy port assumes the active status. Note: when link is
- * restored on the failed port, traffic continues on the currently active
- * port. The ARM firmware does not attempt to 'fail back' traffic to
- * the restored port.
- */
-struct BE_ASYNC_EVENT_LINK_STATE_AMAP {
-	u8 port0_link_status[8];
-	u8 port1_link_status[8];
-	u8 active_port[8];
-	u8 rsvd0[8];	/* DWORD 0 */
-	u8 port0_duplex[8];
-	u8 port0_speed[8];
-	u8 port1_duplex[8];
-	u8 port1_speed[8];
-	u8 port0_fault[8];
-	u8 port1_fault[8];
-	u8 rsvd1[2][8];	/* DWORD 2 */
-	struct BE_ASYNC_EVENT_TRAILER_AMAP trailer;
-} __packed;
-struct ASYNC_EVENT_LINK_STATE_AMAP {
-	u32 dw[4];
-};
-#endif /* __asyncmesg_amap_h__ */
diff --git a/drivers/staging/benet/be_cm.h b/drivers/staging/benet/be_cm.h
deleted file mode 100644
index b7a1dfd20c3..00000000000
--- a/drivers/staging/benet/be_cm.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __be_cm_amap_h__
-#define __be_cm_amap_h__
-#include "be_common.h"
-#include "etx_context.h"
-#include "mpu_context.h"
-
-/*
- * --- CEV_WATERMARK_ENUM ---
- * CQ/EQ Watermark Encodings. Encoded as number of free entries in
- * Queue when Watermark is reached.
- */
-#define CEV_WMARK_0        (0)	/* Watermark when Queue full */
-#define CEV_WMARK_16       (1)	/* Watermark at 16 free entries */
-#define CEV_WMARK_32       (2)	/* Watermark at 32 free entries */
-#define CEV_WMARK_48       (3)	/* Watermark at 48 free entries */
-#define CEV_WMARK_64       (4)	/* Watermark at 64 free entries */
-#define CEV_WMARK_80       (5)	/* Watermark at 80 free entries */
-#define CEV_WMARK_96       (6)	/* Watermark at 96 free entries */
-#define CEV_WMARK_112      (7)	/* Watermark at 112 free entries */
-#define CEV_WMARK_128      (8)	/* Watermark at 128 free entries */
-#define CEV_WMARK_144      (9)	/* Watermark at 144 free entries */
-#define CEV_WMARK_160      (10)	/* Watermark at 160 free entries */
-#define CEV_WMARK_176      (11)	/* Watermark at 176 free entries */
-#define CEV_WMARK_192      (12)	/* Watermark at 192 free entries */
-#define CEV_WMARK_208      (13)	/* Watermark at 208 free entries */
-#define CEV_WMARK_224      (14)	/* Watermark at 224 free entries */
-#define CEV_WMARK_240      (15)	/* Watermark at 240 free entries */
-
-/*
- * --- CQ_CNT_ENUM ---
- * Completion Queue Count Encodings.
- */
-#define CEV_CQ_CNT_256                  (0)	/* CQ has 256 entries */
-#define CEV_CQ_CNT_512                  (1)	/* CQ has 512 entries */
-#define CEV_CQ_CNT_1024                 (2)	/* CQ has 1024 entries */
-
-/*
- * --- EQ_CNT_ENUM ---
- * Event Queue Count Encodings.
- */
-#define CEV_EQ_CNT_256     (0)	/* EQ has 256 entries (16-byte EQEs only) */
-#define CEV_EQ_CNT_512     (1)	/* EQ has 512 entries (16-byte EQEs only) */
-#define CEV_EQ_CNT_1024    (2)	/* EQ has 1024 entries (4-byte or */
-				/* 16-byte EQEs only) */
-#define CEV_EQ_CNT_2048    (3)	/* EQ has 2048 entries (4-byte or */
-				/* 16-byte EQEs only) */
-#define CEV_EQ_CNT_4096    (4)	/* EQ has 4096 entries (4-byte EQEs only) */
-
-/*
- * --- EQ_SIZE_ENUM ---
- * Event Queue Entry Size Encoding.
- */
-#define CEV_EQ_SIZE_4                   (0)	/* EQE is 4 bytes */
-#define CEV_EQ_SIZE_16                  (1)	/* EQE is 16 bytes */
-
-/*
- * Completion Queue Context Table Entry. Contains the state of a CQ.
- * Located in RAM within the CEV block.
- */
-struct BE_CQ_CONTEXT_AMAP {
-	u8 Cidx[11];	/* DWORD 0 */
-	u8 Watermark[4];	/* DWORD 0 */
-	u8 NoDelay;		/* DWORD 0 */
-	u8 EPIdx[11];	/* DWORD 0 */
-	u8 Count[2];	/* DWORD 0 */
-	u8 valid;		/* DWORD 0 */
-	u8 SolEvent;	/* DWORD 0 */
-	u8 Eventable;	/* DWORD 0 */
-	u8 Pidx[11];	/* DWORD 1 */
-	u8 PD[10];		/* DWORD 1 */
-	u8 EQID[7];		/* DWORD 1 */
-	u8 Func;		/* DWORD 1 */
-	u8 WME;		/* DWORD 1 */
-	u8 Stalled;		/* DWORD 1 */
-	u8 Armed;		/* DWORD 1 */
-} __packed;
-struct CQ_CONTEXT_AMAP {
-	u32 dw[2];
-};
-
-/*
- * Event Queue Context Table Entry. Contains the state of an EQ.
- * Located in RAM in the CEV block.
- */
-struct BE_EQ_CONTEXT_AMAP {
-	u8 Cidx[13];	/* DWORD 0 */
-	u8 rsvd0[2];	/* DWORD 0 */
-	u8 Func;		/* DWORD 0 */
-	u8 EPIdx[13];	/* DWORD 0 */
-	u8 valid;		/* DWORD 0 */
-	u8 rsvd1;		/* DWORD 0 */
-	u8 Size;		/* DWORD 0 */
-	u8 Pidx[13];	/* DWORD 1 */
-	u8 rsvd2[3];	/* DWORD 1 */
-	u8 PD[10];		/* DWORD 1 */
-	u8 Count[3];	/* DWORD 1 */
-	u8 SolEvent;	/* DWORD 1 */
-	u8 Stalled;		/* DWORD 1 */
-	u8 Armed;		/* DWORD 1 */
-	u8 Watermark[4];	/* DWORD 2 */
-	u8 WME;		/* DWORD 2 */
-	u8 rsvd3[3];	/* DWORD 2 */
-	u8 EventVect[6];	/* DWORD 2 */
-	u8 rsvd4[2];	/* DWORD 2 */
-	u8 Delay[8];	/* DWORD 2 */
-	u8 rsvd5[6];	/* DWORD 2 */
-	u8 TMR;		/* DWORD 2 */
-	u8 rsvd6;		/* DWORD 2 */
-	u8 rsvd7[32];	/* DWORD 3 */
-} __packed;
-struct EQ_CONTEXT_AMAP {
-	u32 dw[4];
-};
-
-#endif /* __be_cm_amap_h__ */
diff --git a/drivers/staging/benet/be_common.h b/drivers/staging/benet/be_common.h
deleted file mode 100644
index 7e63dc5e334..00000000000
--- a/drivers/staging/benet/be_common.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __be_common_amap_h__
-#define __be_common_amap_h__
-
-/* Physical Address. */
-struct BE_PHYS_ADDR_AMAP {
-	u8 lo[32];		/* DWORD 0 */
-	u8 hi[32];		/* DWORD 1 */
-} __packed;
-struct PHYS_ADDR_AMAP {
-	u32 dw[2];
-};
-
-/* Virtual Address. */
-struct BE_VIRT_ADDR_AMAP {
-	u8 lo[32];		/* DWORD 0 */
-	u8 hi[32];		/* DWORD 1 */
-} __packed;
-struct VIRT_ADDR_AMAP {
-	u32 dw[2];
-};
-
-/* Scatter gather element. */
-struct BE_SGE_AMAP {
-	u8 addr_hi[32];	/* DWORD 0 */
-	u8 addr_lo[32];	/* DWORD 1 */
-	u8 rsvd0[32];	/* DWORD 2 */
-	u8 len[16];		/* DWORD 3 */
-	u8 rsvd1[16];	/* DWORD 3 */
-} __packed;
-struct SGE_AMAP {
-	u32 dw[4];
-};
-
-#endif /* __be_common_amap_h__ */
diff --git a/drivers/staging/benet/be_ethtool.c b/drivers/staging/benet/be_ethtool.c
deleted file mode 100644
index 027af85707a..00000000000
--- a/drivers/staging/benet/be_ethtool.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * be_ethtool.c
- *
- * 	This file contains various functions that ethtool can use
- * 	to talk to the driver and the BE H/W.
- */
-
-#include "benet.h"
-
-#include <linux/ethtool.h>
-
-static const char benet_gstrings_stats[][ETH_GSTRING_LEN] = {
-/* net_device_stats */
-	"rx_packets",
-	"tx_packets",
-	"rx_bytes",
-	"tx_bytes",
-	"rx_errors",
-	"tx_errors",
-	"rx_dropped",
-	"tx_dropped",
-	"multicast",
-	"collisions",
-	"rx_length_errors",
-	"rx_over_errors",
-	"rx_crc_errors",
-	"rx_frame_errors",
-	"rx_fifo_errors",
-	"rx_missed_errors",
-	"tx_aborted_errors",
-	"tx_carrier_errors",
-	"tx_fifo_errors",
-	"tx_heartbeat_errors",
-	"tx_window_errors",
-	"rx_compressed",
-	"tc_compressed",
-/* BE driver Stats */
-	"bes_tx_reqs",
-	"bes_tx_fails",
-	"bes_fwd_reqs",
-	"bes_tx_wrbs",
-	"bes_interrupts",
-	"bes_events",
-	"bes_tx_events",
-	"bes_rx_events",
-	"bes_tx_compl",
-	"bes_rx_compl",
-	"bes_ethrx_post_fail",
-	"bes_802_3_dropped_frames",
-	"bes_802_3_malformed_frames",
-	"bes_rx_misc_pkts",
-	"bes_eth_tx_rate",
-	"bes_eth_rx_rate",
-	"Num Packets collected",
-	"Num Times Flushed",
-};
-
-#define NET_DEV_STATS_LEN \
-	(sizeof(struct net_device_stats)/sizeof(unsigned long))
-
-#define BENET_STATS_LEN  ARRAY_SIZE(benet_gstrings_stats)
-
-static void
-be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-
-	strncpy(drvinfo->driver, be_driver_name, 32);
-	strncpy(drvinfo->version, be_drvr_ver, 32);
-	strncpy(drvinfo->fw_version, be_fw_ver, 32);
-	strcpy(drvinfo->bus_info, pci_name(adapter->pdev));
-	drvinfo->testinfo_len = 0;
-	drvinfo->regdump_len = 0;
-	drvinfo->eedump_len = 0;
-}
-
-static int
-be_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-
-	coalesce->rx_max_coalesced_frames = adapter->max_rx_coal;
-
-	coalesce->rx_coalesce_usecs = adapter->cur_eqd;
-	coalesce->rx_coalesce_usecs_high = adapter->max_eqd;
-	coalesce->rx_coalesce_usecs_low = adapter->min_eqd;
-
-	coalesce->tx_coalesce_usecs = adapter->cur_eqd;
-	coalesce->tx_coalesce_usecs_high = adapter->max_eqd;
-	coalesce->tx_coalesce_usecs_low = adapter->min_eqd;
-
-	coalesce->use_adaptive_rx_coalesce = adapter->enable_aic;
-	coalesce->use_adaptive_tx_coalesce = adapter->enable_aic;
-
-	return 0;
-}
-
-/*
- * This routine is used to set interrup coalescing delay *as well as*
- * the number of pkts to coalesce for LRO.
- */
-static int
-be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-	struct be_eq_object *eq_objectp;
-	u32 max, min, cur;
-	int status;
-
-	adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
-	if (adapter->max_rx_coal >= BE_LRO_MAX_PKTS)
-		adapter->max_rx_coal = BE_LRO_MAX_PKTS;
-
-	if (adapter->enable_aic == 0 &&
-		coalesce->use_adaptive_rx_coalesce == 1) {
-		/* if AIC is being turned on now, start with an EQD of 0 */
-		adapter->cur_eqd = 0;
-	}
-	adapter->enable_aic = coalesce->use_adaptive_rx_coalesce;
-
-	/* round off to nearest multiple of 8 */
-	max = (((coalesce->rx_coalesce_usecs_high + 4) >> 3) << 3);
-	min = (((coalesce->rx_coalesce_usecs_low + 4) >> 3) << 3);
-	cur = (((coalesce->rx_coalesce_usecs + 4) >> 3) << 3);
-
-	if (adapter->enable_aic) {
-		/* accept low and high if AIC is enabled */
-		if (max > MAX_EQD)
-			max = MAX_EQD;
-		if (min > max)
-			min = max;
-		adapter->max_eqd = max;
-		adapter->min_eqd = min;
-		if (adapter->cur_eqd > max)
-			adapter->cur_eqd = max;
-		if (adapter->cur_eqd < min)
-			adapter->cur_eqd = min;
-	} else {
-		/* accept specified coalesce_usecs only if AIC is disabled */
-		if (cur > MAX_EQD)
-			cur = MAX_EQD;
-		eq_objectp = &pnob->event_q_obj;
-		status =
-		    be_eq_modify_delay(&pnob->fn_obj, 1, &eq_objectp, &cur,
-				       NULL, NULL, NULL);
-		if (status == BE_SUCCESS)
-			adapter->cur_eqd = cur;
-	}
-	return 0;
-}
-
-static u32 be_get_rx_csum(struct net_device *netdev)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-	return adapter->rx_csum;
-}
-
-static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-
-	if (data)
-		adapter->rx_csum = 1;
-	else
-		adapter->rx_csum = 0;
-
-	return 0;
-}
-
-static void
-be_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
-{
-	switch (stringset) {
-	case ETH_SS_STATS:
-		memcpy(data, *benet_gstrings_stats,
-		       sizeof(benet_gstrings_stats));
-		break;
-	}
-}
-
-static int be_get_stats_count(struct net_device *netdev)
-{
-	return BENET_STATS_LEN;
-}
-
-static void
-be_get_ethtool_stats(struct net_device *netdev,
-		     struct ethtool_stats *stats, uint64_t *data)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-	int i;
-
-	benet_get_stats(netdev);
-
-	for (i = 0; i <= NET_DEV_STATS_LEN; i++)
-		data[i] = ((unsigned long *)&adapter->benet_stats)[i];
-
-	data[i] = adapter->be_stat.bes_tx_reqs;
-	data[i++] = adapter->be_stat.bes_tx_fails;
-	data[i++] = adapter->be_stat.bes_fwd_reqs;
-	data[i++] = adapter->be_stat.bes_tx_wrbs;
-
-	data[i++] = adapter->be_stat.bes_ints;
-	data[i++] = adapter->be_stat.bes_events;
-	data[i++] = adapter->be_stat.bes_tx_events;
-	data[i++] = adapter->be_stat.bes_rx_events;
-	data[i++] = adapter->be_stat.bes_tx_compl;
-	data[i++] = adapter->be_stat.bes_rx_compl;
-	data[i++] = adapter->be_stat.bes_ethrx_post_fail;
-	data[i++] = adapter->be_stat.bes_802_3_dropped_frames;
-	data[i++] = adapter->be_stat.bes_802_3_malformed_frames;
-	data[i++] = adapter->be_stat.bes_rx_misc_pkts;
-	data[i++] = adapter->be_stat.bes_eth_tx_rate;
-	data[i++] = adapter->be_stat.bes_eth_rx_rate;
-	data[i++] = adapter->be_stat.bes_rx_coal;
-	data[i++] = adapter->be_stat.bes_rx_flush;
-
-}
-
-static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
-	ecmd->speed = SPEED_10000;
-	ecmd->duplex = DUPLEX_FULL;
-	ecmd->autoneg = AUTONEG_DISABLE;
-	return 0;
-}
-
-/* Get the Ring parameters from the pnob */
-static void
-be_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-
-	/* Pre Set Maxims */
-	ring->rx_max_pending = pnob->rx_q_len;
-	ring->rx_mini_max_pending = ring->rx_mini_max_pending;
-	ring->rx_jumbo_max_pending = ring->rx_jumbo_max_pending;
-	ring->tx_max_pending = pnob->tx_q_len;
-
-	/* Current hardware Settings                */
-	ring->rx_pending = atomic_read(&pnob->rx_q_posted);
-	ring->rx_mini_pending = ring->rx_mini_pending;
-	ring->rx_jumbo_pending = ring->rx_jumbo_pending;
-	ring->tx_pending = atomic_read(&pnob->tx_q_used);
-
-}
-
-static void
-be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	bool rxfc, txfc;
-	int status;
-
-	status = be_eth_get_flow_control(&pnob->fn_obj, &txfc, &rxfc);
-	if (status != BE_SUCCESS) {
-		dev_info(&netdev->dev, "Unable to get pause frame settings\n");
-		/* return defaults */
-		ecmd->rx_pause = 1;
-		ecmd->tx_pause = 0;
-		ecmd->autoneg = AUTONEG_ENABLE;
-		return;
-	}
-
-	if (txfc == true)
-		ecmd->tx_pause = 1;
-	else
-		ecmd->tx_pause = 0;
-
-	if (rxfc == true)
-		ecmd->rx_pause = 1;
-	else
-		ecmd->rx_pause = 0;
-
-	ecmd->autoneg = AUTONEG_ENABLE;
-}
-
-static int
-be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	bool txfc, rxfc;
-	int status;
-
-	if (ecmd->autoneg != AUTONEG_ENABLE)
-		return -EINVAL;
-
-	if (ecmd->tx_pause)
-		txfc = true;
-	else
-		txfc = false;
-
-	if (ecmd->rx_pause)
-		rxfc = true;
-	else
-		rxfc = false;
-
-	status = be_eth_set_flow_control(&pnob->fn_obj, txfc, rxfc);
-	if (status != BE_SUCCESS) {
-		dev_info(&netdev->dev, "Unable to set pause frame settings\n");
-		return -1;
-	}
-	return 0;
-}
-
-struct ethtool_ops be_ethtool_ops = {
-	.get_settings = be_get_settings,
-	.get_drvinfo = be_get_drvinfo,
-	.get_link = ethtool_op_get_link,
-	.get_coalesce = be_get_coalesce,
-	.set_coalesce = be_set_coalesce,
-	.get_ringparam = be_get_ringparam,
-	.get_pauseparam = be_get_pauseparam,
-	.set_pauseparam = be_set_pauseparam,
-	.get_rx_csum = be_get_rx_csum,
-	.set_rx_csum = be_set_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_csum,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = ethtool_op_set_tso,
-	.get_strings = be_get_strings,
-	.get_stats_count = be_get_stats_count,
-	.get_ethtool_stats = be_get_ethtool_stats,
-};
diff --git a/drivers/staging/benet/be_init.c b/drivers/staging/benet/be_init.c
deleted file mode 100644
index 12a026c3f9e..00000000000
--- a/drivers/staging/benet/be_init.c
+++ /dev/null
@@ -1,1382 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include <linux/etherdevice.h>
-#include "benet.h"
-
-#define  DRVR_VERSION  "1.0.728"
-
-static const struct pci_device_id be_device_id_table[] = {
-	{PCI_DEVICE(0x19a2, 0x0201)},
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, be_device_id_table);
-
-MODULE_VERSION(DRVR_VERSION);
-
-#define DRV_DESCRIPTION "ServerEngines BladeEngine Network Driver Version "
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION DRVR_VERSION);
-MODULE_AUTHOR("ServerEngines");
-MODULE_LICENSE("GPL");
-
-static unsigned int msix = 1;
-module_param(msix, uint, S_IRUGO);
-MODULE_PARM_DESC(msix, "Use MSI-x interrupts");
-
-static unsigned int rxbuf_size = 2048;	/* Default RX frag size */
-module_param(rxbuf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(rxbuf_size, "Size of buffers to hold Rx data");
-
-const char be_drvr_ver[] = DRVR_VERSION;
-char be_fw_ver[32];		/* F/W version filled in by be_probe */
-char be_driver_name[] = "benet";
-
-/*
- * Number of entries in each queue.
- */
-#define EVENT_Q_LEN		1024
-#define ETH_TXQ_LEN		2048
-#define ETH_TXCQ_LEN		1024
-#define ETH_RXQ_LEN		1024	/* Does not support any other value */
-#define ETH_UC_RXCQ_LEN		1024
-#define ETH_BC_RXCQ_LEN		256
-#define MCC_Q_LEN               64	/* total size not to exceed 8 pages */
-#define MCC_CQ_LEN              256
-
-/* Bit mask describing events of interest to be traced */
-unsigned int trace_level;
-
-static int
-init_pci_be_function(struct be_adapter *adapter, struct pci_dev *pdev)
-{
-	u64 pa;
-
-	/* CSR */
-	pa = pci_resource_start(pdev, 2);
-	adapter->csr_va = ioremap_nocache(pa, pci_resource_len(pdev, 2));
-	if (adapter->csr_va == NULL)
-		return -ENOMEM;
-
-	/* Door Bell */
-	pa = pci_resource_start(pdev, 4);
-	adapter->db_va = ioremap_nocache(pa, (128 * 1024));
-	if (adapter->db_va == NULL) {
-		iounmap(adapter->csr_va);
-		return -ENOMEM;
-	}
-
-	/* PCI */
-	pa = pci_resource_start(pdev, 1);
-	adapter->pci_va = ioremap_nocache(pa, pci_resource_len(pdev, 1));
-	if (adapter->pci_va == NULL) {
-		iounmap(adapter->csr_va);
-		iounmap(adapter->db_va);
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-/*
-   This function enables the interrupt corresponding to the Event
-   queue ID for the given NetObject
-*/
-void be_enable_eq_intr(struct be_net_object *pnob)
-{
-	struct CQ_DB_AMAP cqdb;
-	cqdb.dw[0] = 0;
-	AMAP_SET_BITS_PTR(CQ_DB, event, &cqdb, 1);
-	AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, 1);
-	AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, 0);
-	AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, pnob->event_q_id);
-	PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
-}
-
-/*
-   This function disables the interrupt corresponding to the Event
-   queue ID for the given NetObject
-*/
-void be_disable_eq_intr(struct be_net_object *pnob)
-{
-	struct CQ_DB_AMAP cqdb;
-	cqdb.dw[0] = 0;
-	AMAP_SET_BITS_PTR(CQ_DB, event, &cqdb, 1);
-	AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, 0);
-	AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, 0);
-	AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, pnob->event_q_id);
-	PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
-}
-
-/*
-    This function enables the interrupt from the  network function
-    of the BladeEngine. Use the function be_disable_eq_intr()
-    to enable the interrupt from the event queue of only one specific
-    NetObject
-*/
-void be_enable_intr(struct be_net_object *pnob)
-{
-	struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
-	u32 host_intr;
-
-	ctrl.dw[0] = PCICFG1_READ(&pnob->fn_obj, host_timer_int_ctrl);
-	host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
-							hostintr, ctrl.dw);
-	if (!host_intr) {
-		AMAP_SET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
-			hostintr, ctrl.dw, 1);
-		PCICFG1_WRITE(&pnob->fn_obj, host_timer_int_ctrl,
-			ctrl.dw[0]);
-	}
-}
-
-/*
-   This function disables the interrupt from the network function of
-   the BladeEngine.  Use the function be_disable_eq_intr() to
-   disable the interrupt from the event queue of only one specific NetObject
-*/
-void be_disable_intr(struct be_net_object *pnob)
-{
-
-	struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
-	u32 host_intr;
-	ctrl.dw[0] = PCICFG1_READ(&pnob->fn_obj, host_timer_int_ctrl);
-	host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
-							hostintr, ctrl.dw);
-	if (host_intr) {
-		AMAP_SET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR, hostintr,
-			ctrl.dw, 0);
-		PCICFG1_WRITE(&pnob->fn_obj, host_timer_int_ctrl,
-			ctrl.dw[0]);
-	}
-}
-
-static int be_enable_msix(struct be_adapter *adapter)
-{
-	int i, ret;
-
-	if (!msix)
-		return -1;
-
-	for (i = 0; i < BE_MAX_REQ_MSIX_VECTORS; i++)
-		adapter->msix_entries[i].entry = i;
-
-	ret = pci_enable_msix(adapter->pdev, adapter->msix_entries,
-		BE_MAX_REQ_MSIX_VECTORS);
-
-	if (ret == 0)
-		adapter->msix_enabled = 1;
-	return ret;
-}
-
-static int be_register_isr(struct be_adapter *adapter,
-		struct be_net_object *pnob)
-{
-	struct net_device *netdev = pnob->netdev;
-	int intx = 0, r;
-
-	netdev->irq = adapter->pdev->irq;
-	r = be_enable_msix(adapter);
-
-	if (r == 0) {
-		r = request_irq(adapter->msix_entries[0].vector,
-				be_int, IRQF_SHARED, netdev->name, netdev);
-		if (r) {
-			printk(KERN_WARNING
-				"MSIX Request IRQ failed - Errno %d\n", r);
-			intx = 1;
-			pci_disable_msix(adapter->pdev);
-			adapter->msix_enabled = 0;
-		}
-	} else {
-		intx = 1;
-	}
-
-	if (intx) {
-		r = request_irq(netdev->irq, be_int, IRQF_SHARED,
-				netdev->name, netdev);
-		if (r) {
-			printk(KERN_WARNING
-				"INTx Request IRQ failed - Errno %d\n", r);
-			return -1;
-		}
-	}
-	adapter->isr_registered = 1;
-	return 0;
-}
-
-static void be_unregister_isr(struct be_adapter *adapter)
-{
-	struct net_device *netdev = adapter->netdevp;
-	if (adapter->isr_registered) {
-		if (adapter->msix_enabled) {
-			free_irq(adapter->msix_entries[0].vector, netdev);
-			pci_disable_msix(adapter->pdev);
-			adapter->msix_enabled = 0;
-		} else {
-			free_irq(netdev->irq, netdev);
-		}
-		adapter->isr_registered = 0;
-	}
-}
-
-/*
-    This function processes the Flush Completions that are issued by the
-    ARM F/W, when a Recv Ring is destroyed.  A flush completion is
-    identified when a Rx COmpl descriptor has the tcpcksum and udpcksum
-    set and the pktsize is 32.  These completions are received on the
-    Rx Completion Queue.
-*/
-static u32 be_process_rx_flush_cmpl(struct be_net_object *pnob)
-{
-	struct ETH_RX_COMPL_AMAP *rxcp;
-	unsigned int i = 0;
-	while ((rxcp = be_get_rx_cmpl(pnob)) != NULL) {
-		be_notify_cmpl(pnob, 1, pnob->rx_cq_id, 1);
-		i++;
-	}
-	return i;
-}
-
-static void be_tx_q_clean(struct be_net_object *pnob)
-{
-	while (atomic_read(&pnob->tx_q_used))
-		process_one_tx_compl(pnob, tx_compl_lastwrb_idx_get(pnob));
-}
-
-static void be_rx_q_clean(struct be_net_object *pnob)
-{
-	if (pnob->rx_ctxt) {
-		int i;
-		struct be_rx_page_info *rx_page_info;
-		for (i = 0; i < pnob->rx_q_len; i++) {
-			rx_page_info = &(pnob->rx_page_info[i]);
-			if (!pnob->rx_pg_shared || rx_page_info->page_offset) {
-				pci_unmap_page(pnob->adapter->pdev,
-				       pci_unmap_addr(rx_page_info, bus),
-					       pnob->rx_buf_size,
-					       PCI_DMA_FROMDEVICE);
-			}
-			if (rx_page_info->page)
-				put_page(rx_page_info->page);
-			memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-		}
-		pnob->rx_pg_info_hd = 0;
-	}
-}
-
-static void be_destroy_netobj(struct be_net_object *pnob)
-{
-	int status;
-
-	if (pnob->tx_q_created) {
-		status = be_eth_sq_destroy(&pnob->tx_q_obj);
-		pnob->tx_q_created = 0;
-	}
-
-	if (pnob->rx_q_created) {
-		status = be_eth_rq_destroy(&pnob->rx_q_obj);
-		if (status != 0) {
-			status = be_eth_rq_destroy_options(&pnob->rx_q_obj, 0,
-						      NULL, NULL);
-			BUG_ON(status);
-		}
-		pnob->rx_q_created = 0;
-	}
-
-	be_process_rx_flush_cmpl(pnob);
-
-	if (pnob->tx_cq_created) {
-		status = be_cq_destroy(&pnob->tx_cq_obj);
-		pnob->tx_cq_created = 0;
-	}
-
-	if (pnob->rx_cq_created) {
-		status = be_cq_destroy(&pnob->rx_cq_obj);
-		pnob->rx_cq_created = 0;
-	}
-
-	if (pnob->mcc_q_created) {
-		status = be_mcc_ring_destroy(&pnob->mcc_q_obj);
-		pnob->mcc_q_created = 0;
-	}
-	if (pnob->mcc_cq_created) {
-		status = be_cq_destroy(&pnob->mcc_cq_obj);
-		pnob->mcc_cq_created = 0;
-	}
-
-	if (pnob->event_q_created) {
-		status = be_eq_destroy(&pnob->event_q_obj);
-		pnob->event_q_created = 0;
-	}
-	be_function_cleanup(&pnob->fn_obj);
-}
-
-/*
- * free all resources associated with a pnob
- * Called at the time of module cleanup as well a any error during
- * module init.  Some resources may be partially allocated in a NetObj.
- */
-static void netobject_cleanup(struct be_adapter *adapter,
-			struct be_net_object *pnob)
-{
-	struct net_device *netdev = adapter->netdevp;
-
-	if (netif_running(netdev)) {
-		netif_stop_queue(netdev);
-		be_wait_nic_tx_cmplx_cmpl(pnob);
-		be_disable_eq_intr(pnob);
-	}
-
-	be_unregister_isr(adapter);
-
-	if (adapter->tasklet_started) {
-		tasklet_kill(&(adapter->sts_handler));
-		adapter->tasklet_started = 0;
-	}
-	if (pnob->fn_obj_created)
-		be_disable_intr(pnob);
-
-	if (adapter->dev_state != BE_DEV_STATE_NONE)
-		unregister_netdev(netdev);
-
-	if (pnob->fn_obj_created)
-		be_destroy_netobj(pnob);
-
-	adapter->net_obj = NULL;
-	adapter->netdevp = NULL;
-
-	be_rx_q_clean(pnob);
-	if (pnob->rx_ctxt) {
-		kfree(pnob->rx_page_info);
-		kfree(pnob->rx_ctxt);
-	}
-
-	be_tx_q_clean(pnob);
-	kfree(pnob->tx_ctxt);
-
-	if (pnob->mcc_q)
-		pci_free_consistent(adapter->pdev, pnob->mcc_q_size,
-			pnob->mcc_q, pnob->mcc_q_bus);
-
-	if (pnob->mcc_wrb_ctxt)
-		free_pages((unsigned long)pnob->mcc_wrb_ctxt,
-			   get_order(pnob->mcc_wrb_ctxt_size));
-
-	if (pnob->mcc_cq)
-		pci_free_consistent(adapter->pdev, pnob->mcc_cq_size,
-			pnob->mcc_cq, pnob->mcc_cq_bus);
-
-	if (pnob->event_q)
-		pci_free_consistent(adapter->pdev, pnob->event_q_size,
-			pnob->event_q, pnob->event_q_bus);
-
-	if (pnob->tx_cq)
-		pci_free_consistent(adapter->pdev, pnob->tx_cq_size,
-			pnob->tx_cq, pnob->tx_cq_bus);
-
-	if (pnob->tx_q)
-		pci_free_consistent(adapter->pdev, pnob->tx_q_size,
-			pnob->tx_q, pnob->tx_q_bus);
-
-	if (pnob->rx_q)
-		pci_free_consistent(adapter->pdev, pnob->rx_q_size,
-			pnob->rx_q, pnob->rx_q_bus);
-
-	if (pnob->rx_cq)
-		pci_free_consistent(adapter->pdev, pnob->rx_cq_size,
-			pnob->rx_cq, pnob->rx_cq_bus);
-
-
-	if (pnob->mb_ptr)
-		pci_free_consistent(adapter->pdev, pnob->mb_size, pnob->mb_ptr,
-			pnob->mb_bus);
-
-	free_netdev(netdev);
-}
-
-
-static int be_nob_ring_alloc(struct be_adapter *adapter,
-	struct be_net_object *pnob)
-{
-	u32 size;
-
-	/* Mail box rd; mailbox pointer needs to be 16 byte aligned */
-	pnob->mb_size = sizeof(struct MCC_MAILBOX_AMAP) + 16;
-	pnob->mb_ptr = pci_alloc_consistent(adapter->pdev, pnob->mb_size,
-				&pnob->mb_bus);
-	if (!pnob->mb_bus)
-		return -1;
-	memset(pnob->mb_ptr, 0, pnob->mb_size);
-	pnob->mb_rd.va = PTR_ALIGN(pnob->mb_ptr, 16);
-	pnob->mb_rd.pa = PTR_ALIGN(pnob->mb_bus, 16);
-	pnob->mb_rd.length = sizeof(struct MCC_MAILBOX_AMAP);
-	/*
-	 * Event queue
-	 */
-	pnob->event_q_len = EVENT_Q_LEN;
-	pnob->event_q_size = pnob->event_q_len * sizeof(struct EQ_ENTRY_AMAP);
-	pnob->event_q = pci_alloc_consistent(adapter->pdev, pnob->event_q_size,
-				&pnob->event_q_bus);
-	if (!pnob->event_q_bus)
-		return -1;
-	memset(pnob->event_q, 0, pnob->event_q_size);
-	/*
-	 * Eth TX queue
-	 */
-	pnob->tx_q_len = ETH_TXQ_LEN;
-	pnob->tx_q_port = 0;
-	pnob->tx_q_size =  pnob->tx_q_len * sizeof(struct ETH_WRB_AMAP);
-	pnob->tx_q = pci_alloc_consistent(adapter->pdev, pnob->tx_q_size,
-				&pnob->tx_q_bus);
-	if (!pnob->tx_q_bus)
-		return -1;
-	memset(pnob->tx_q, 0, pnob->tx_q_size);
-	/*
-	 * Eth TX Compl queue
-	 */
-	pnob->txcq_len = ETH_TXCQ_LEN;
-	pnob->tx_cq_size = pnob->txcq_len * sizeof(struct ETH_TX_COMPL_AMAP);
-	pnob->tx_cq = pci_alloc_consistent(adapter->pdev, pnob->tx_cq_size,
-				&pnob->tx_cq_bus);
-	if (!pnob->tx_cq_bus)
-		return -1;
-	memset(pnob->tx_cq, 0, pnob->tx_cq_size);
-	/*
-	 * Eth RX queue
-	 */
-	pnob->rx_q_len = ETH_RXQ_LEN;
-	pnob->rx_q_size =  pnob->rx_q_len * sizeof(struct ETH_RX_D_AMAP);
-	pnob->rx_q = pci_alloc_consistent(adapter->pdev, pnob->rx_q_size,
-				&pnob->rx_q_bus);
-	if (!pnob->rx_q_bus)
-		return -1;
-	memset(pnob->rx_q, 0, pnob->rx_q_size);
-	/*
-	 * Eth Unicast RX Compl queue
-	 */
-	pnob->rx_cq_len = ETH_UC_RXCQ_LEN;
-	pnob->rx_cq_size =  pnob->rx_cq_len *
-			sizeof(struct ETH_RX_COMPL_AMAP);
-	pnob->rx_cq = pci_alloc_consistent(adapter->pdev, pnob->rx_cq_size,
-				&pnob->rx_cq_bus);
-	if (!pnob->rx_cq_bus)
-		return -1;
-	memset(pnob->rx_cq, 0, pnob->rx_cq_size);
-
-	/* TX resources */
-	size = pnob->tx_q_len * sizeof(void **);
-	pnob->tx_ctxt = kzalloc(size, GFP_KERNEL);
-	if (pnob->tx_ctxt == NULL)
-		return -1;
-
-	/* RX resources */
-	size = pnob->rx_q_len * sizeof(void *);
-	pnob->rx_ctxt = kzalloc(size, GFP_KERNEL);
-	if (pnob->rx_ctxt == NULL)
-		return -1;
-
-	size = (pnob->rx_q_len * sizeof(struct be_rx_page_info));
-	pnob->rx_page_info = kzalloc(size, GFP_KERNEL);
-	if (pnob->rx_page_info == NULL)
-		return -1;
-
-	adapter->eth_statsp = kzalloc(sizeof(struct FWCMD_ETH_GET_STATISTICS),
-				GFP_KERNEL);
-	if (adapter->eth_statsp == NULL)
-		return -1;
-	pnob->rx_buf_size = rxbuf_size;
-	return 0;
-}
-
-/*
-    This function initializes the be_net_object for subsequent
-    network operations.
-
-    Before calling this function, the driver  must have allocated
-    space for the NetObject structure, initialized the structure,
-    allocated DMAable memory for all the network queues that form
-    part of the NetObject and populated the start address (virtual)
-    and number of entries allocated for each queue in the NetObject structure.
-
-    The driver must also have allocated memory to hold the
-    mailbox structure (MCC_MAILBOX) and post the physical address,
-    virtual addresses and the size of the mailbox memory in the
-    NetObj.mb_rd.  This structure is used by BECLIB for
-    initial communication with the embedded MCC processor. BECLIB
-    uses the mailbox until MCC rings are created for  more  efficient
-    communication with the MCC processor.
-
-    If the driver wants to create multiple network interface for more
-    than one protection domain, it can call be_create_netobj()
-    multiple times  once for each protection domain.  A Maximum of
-    32 protection domains are supported.
-
-*/
-static int
-be_create_netobj(struct be_net_object *pnob, u8 __iomem *csr_va,
-	u8 __iomem *db_va, u8 __iomem *pci_va)
-{
-	int status = 0;
-	bool  eventable = false, tx_no_delay = false, rx_no_delay = false;
-	struct be_eq_object *eq_objectp = NULL;
-	struct be_function_object *pfob = &pnob->fn_obj;
-	struct ring_desc rd;
-	u32 set_rxbuf_size;
-	u32 tx_cmpl_wm = CEV_WMARK_96;	/* 0xffffffff to disable */
-	u32 rx_cmpl_wm = CEV_WMARK_160;	/* 0xffffffff to disable */
-	u32 eq_delay = 0; /* delay in 8usec units. 0xffffffff to disable */
-
-	memset(&rd, 0, sizeof(struct ring_desc));
-
-	status = be_function_object_create(csr_va, db_va, pci_va,
-			BE_FUNCTION_TYPE_NETWORK, &pnob->mb_rd, pfob);
-	if (status != BE_SUCCESS)
-		return status;
-	pnob->fn_obj_created = true;
-
-	if (tx_cmpl_wm == 0xffffffff)
-		tx_no_delay = true;
-	if (rx_cmpl_wm == 0xffffffff)
-		rx_no_delay = true;
-	/*
-	 * now create the necessary rings
-	 * Event Queue first.
-	 */
-	if (pnob->event_q_len) {
-		rd.va = pnob->event_q;
-		rd.pa = pnob->event_q_bus;
-		rd.length = pnob->event_q_size;
-
-		status = be_eq_create(pfob, &rd, 4, pnob->event_q_len,
-				(u32) -1,	/* CEV_WMARK_* or -1 */
-				eq_delay,	/* in 8us units, or -1 */
-				&pnob->event_q_obj);
-		if (status != BE_SUCCESS)
-			goto error_ret;
-		pnob->event_q_id = pnob->event_q_obj.eq_id;
-		pnob->event_q_created = 1;
-		eventable = true;
-		eq_objectp = &pnob->event_q_obj;
-	}
-	/*
-	 * Now Eth Tx Compl. queue.
-	 */
-	if (pnob->txcq_len) {
-		rd.va = pnob->tx_cq;
-		rd.pa = pnob->tx_cq_bus;
-		rd.length = pnob->tx_cq_size;
-
-		status = be_cq_create(pfob, &rd,
-			pnob->txcq_len * sizeof(struct ETH_TX_COMPL_AMAP),
-			false,	/* solicted events,  */
-			tx_no_delay,	/* nodelay  */
-			tx_cmpl_wm,	/* Watermark encodings */
-			eq_objectp, &pnob->tx_cq_obj);
-		if (status != BE_SUCCESS)
-			goto error_ret;
-
-		pnob->tx_cq_id = pnob->tx_cq_obj.cq_id;
-		pnob->tx_cq_created = 1;
-	}
-	/*
-	 * Eth Tx queue
-	 */
-	if (pnob->tx_q_len) {
-		struct be_eth_sq_parameters ex_params = { 0 };
-		u32 type;
-
-		if (pnob->tx_q_port) {
-			/* TXQ to be bound to a specific port */
-			type = BE_ETH_TX_RING_TYPE_BOUND;
-			ex_params.port = pnob->tx_q_port - 1;
-		} else
-			type = BE_ETH_TX_RING_TYPE_STANDARD;
-
-		rd.va = pnob->tx_q;
-		rd.pa = pnob->tx_q_bus;
-		rd.length = pnob->tx_q_size;
-
-		status = be_eth_sq_create_ex(pfob, &rd,
-				pnob->tx_q_len * sizeof(struct ETH_WRB_AMAP),
-				type, 2, &pnob->tx_cq_obj,
-				&ex_params, &pnob->tx_q_obj);
-
-		if (status != BE_SUCCESS)
-			goto error_ret;
-
-		pnob->tx_q_id = pnob->tx_q_obj.bid;
-		pnob->tx_q_created = 1;
-	}
-	/*
-	 * Now Eth Rx compl. queue.  Always needed.
-	 */
-	rd.va = pnob->rx_cq;
-	rd.pa = pnob->rx_cq_bus;
-	rd.length = pnob->rx_cq_size;
-
-	status = be_cq_create(pfob, &rd,
-			pnob->rx_cq_len * sizeof(struct ETH_RX_COMPL_AMAP),
-			false,	/* solicted events,  */
-			rx_no_delay,	/* nodelay  */
-			rx_cmpl_wm,	/* Watermark encodings */
-			eq_objectp, &pnob->rx_cq_obj);
-	if (status != BE_SUCCESS)
-		goto error_ret;
-
-	pnob->rx_cq_id = pnob->rx_cq_obj.cq_id;
-	pnob->rx_cq_created = 1;
-
-	status = be_eth_rq_set_frag_size(pfob, pnob->rx_buf_size,
-			(u32 *) &set_rxbuf_size);
-	if (status != BE_SUCCESS) {
-		be_eth_rq_get_frag_size(pfob, (u32 *) &pnob->rx_buf_size);
-		if ((pnob->rx_buf_size != 2048) && (pnob->rx_buf_size != 4096)
-		    && (pnob->rx_buf_size != 8192))
-			goto error_ret;
-	} else {
-		if (pnob->rx_buf_size != set_rxbuf_size)
-			pnob->rx_buf_size = set_rxbuf_size;
-	}
-	/*
-	 * Eth RX queue. be_eth_rq_create() always assumes 2 pages size
-	 */
-	rd.va = pnob->rx_q;
-	rd.pa = pnob->rx_q_bus;
-	rd.length = pnob->rx_q_size;
-
-	status = be_eth_rq_create(pfob, &rd, &pnob->rx_cq_obj,
-			     &pnob->rx_cq_obj, &pnob->rx_q_obj);
-
-	if (status != BE_SUCCESS)
-		goto error_ret;
-
-	pnob->rx_q_id = pnob->rx_q_obj.rid;
-	pnob->rx_q_created = 1;
-
-	return BE_SUCCESS;	/* All required queues created. */
-
-error_ret:
-	be_destroy_netobj(pnob);
-	return status;
-}
-
-static int be_nob_ring_init(struct be_adapter *adapter,
-				struct be_net_object *pnob)
-{
-	int status;
-
-	pnob->event_q_tl = 0;
-
-	pnob->tx_q_hd = 0;
-	pnob->tx_q_tl = 0;
-
-	pnob->tx_cq_tl = 0;
-
-	pnob->rx_cq_tl = 0;
-
-	memset(pnob->event_q, 0, pnob->event_q_size);
-	memset(pnob->tx_cq, 0, pnob->tx_cq_size);
-	memset(pnob->tx_ctxt, 0, pnob->tx_q_len * sizeof(void **));
-	memset(pnob->rx_ctxt, 0, pnob->rx_q_len * sizeof(void *));
-	pnob->rx_pg_info_hd = 0;
-	pnob->rx_q_hd = 0;
-	atomic_set(&pnob->rx_q_posted, 0);
-
-	status = be_create_netobj(pnob, adapter->csr_va, adapter->db_va,
-				adapter->pci_va);
-	if (status != BE_SUCCESS)
-		return -1;
-
-	be_post_eth_rx_buffs(pnob);
-	return 0;
-}
-
-/* This function handles async callback for link status */
-static void
-be_link_status_async_callback(void *context, u32 event_code, void *event)
-{
-	struct ASYNC_EVENT_LINK_STATE_AMAP *link_status = event;
-	struct be_adapter *adapter = context;
-	bool link_enable = false;
-	struct be_net_object *pnob;
-	struct ASYNC_EVENT_TRAILER_AMAP *async_trailer;
-	struct net_device *netdev;
-	u32 async_event_code, async_event_type, active_port;
-	u32 port0_link_status, port1_link_status, port0_duplex, port1_duplex;
-	u32 port0_speed, port1_speed;
-
-	if (event_code != ASYNC_EVENT_CODE_LINK_STATE) {
-		/* Not our event to handle */
-		return;
-	}
-	async_trailer = (struct ASYNC_EVENT_TRAILER_AMAP *)
-	    ((u8 *) event + sizeof(struct MCC_CQ_ENTRY_AMAP) -
-	     sizeof(struct ASYNC_EVENT_TRAILER_AMAP));
-
-	async_event_code = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER, event_code,
-					     async_trailer);
-	BUG_ON(async_event_code != ASYNC_EVENT_CODE_LINK_STATE);
-
-	pnob = adapter->net_obj;
-	netdev = pnob->netdev;
-
-	/* Determine if this event is a switch VLD or a physical link event */
-	async_event_type = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER, event_type,
-					     async_trailer);
-	active_port = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
-					active_port, link_status);
-	port0_link_status = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
-					      port0_link_status, link_status);
-	port1_link_status = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
-					      port1_link_status, link_status);
-	port0_duplex = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
-					 port0_duplex, link_status);
-	port1_duplex = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
-					 port1_duplex, link_status);
-	port0_speed = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
-					port0_speed, link_status);
-	port1_speed = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
-					port1_speed, link_status);
-	if (async_event_type == NTWK_LINK_TYPE_VIRTUAL) {
-		adapter->be_stat.bes_link_change_virtual++;
-		if (adapter->be_link_sts->active_port != active_port) {
-			dev_notice(&netdev->dev,
-			       "Active port changed due to VLD on switch\n");
-		} else {
-			dev_notice(&netdev->dev, "Link status update\n");
-		}
-
-	} else {
-		adapter->be_stat.bes_link_change_physical++;
-		if (adapter->be_link_sts->active_port != active_port) {
-			dev_notice(&netdev->dev,
-			       "Active port changed due to port link"
-			       " status change\n");
-		} else {
-			dev_notice(&netdev->dev, "Link status update\n");
-		}
-	}
-
-	memset(adapter->be_link_sts, 0, sizeof(adapter->be_link_sts));
-
-	if ((port0_link_status == ASYNC_EVENT_LINK_UP) ||
-	    (port1_link_status == ASYNC_EVENT_LINK_UP)) {
-		if ((adapter->port0_link_sts == BE_PORT_LINK_DOWN) &&
-		    (adapter->port1_link_sts == BE_PORT_LINK_DOWN)) {
-			/* Earlier both the ports are down So link is up */
-			link_enable = true;
-		}
-
-		if (port0_link_status == ASYNC_EVENT_LINK_UP) {
-			adapter->port0_link_sts = BE_PORT_LINK_UP;
-			adapter->be_link_sts->mac0_duplex = port0_duplex;
-			adapter->be_link_sts->mac0_speed = port0_speed;
-			if (active_port == NTWK_PORT_A)
-				adapter->be_link_sts->active_port = 0;
-		} else
-			adapter->port0_link_sts = BE_PORT_LINK_DOWN;
-
-		if (port1_link_status == ASYNC_EVENT_LINK_UP) {
-			adapter->port1_link_sts = BE_PORT_LINK_UP;
-			adapter->be_link_sts->mac1_duplex = port1_duplex;
-			adapter->be_link_sts->mac1_speed = port1_speed;
-			if (active_port == NTWK_PORT_B)
-				adapter->be_link_sts->active_port = 1;
-		} else
-			adapter->port1_link_sts = BE_PORT_LINK_DOWN;
-
-		printk(KERN_INFO "Link Properties for %s:\n", netdev->name);
-		dev_info(&netdev->dev, "Link Properties:\n");
-		be_print_link_info(adapter->be_link_sts);
-
-		if (!link_enable)
-			return;
-		/*
-		 * Both ports were down previously, but atleast one of
-		 * them has come up if this netdevice's carrier is not up,
-		 * then indicate to stack
-		 */
-		if (!netif_carrier_ok(netdev)) {
-			netif_start_queue(netdev);
-			netif_carrier_on(netdev);
-		}
-		return;
-	}
-
-	/* Now both the ports are down. Tell the stack about it */
-	dev_info(&netdev->dev, "Both ports are down\n");
-	adapter->port0_link_sts = BE_PORT_LINK_DOWN;
-	adapter->port1_link_sts = BE_PORT_LINK_DOWN;
-	if (netif_carrier_ok(netdev)) {
-		netif_carrier_off(netdev);
-		netif_stop_queue(netdev);
-	}
-	return;
-}
-
-static int be_mcc_create(struct be_adapter *adapter)
-{
-	struct be_net_object *pnob;
-
-	pnob = adapter->net_obj;
-	/*
-	 * Create the MCC ring so that all further communication with
-	 * MCC can go thru the ring. we do this at the end since
-	 * we do not want to be dealing with interrupts until the
-	 * initialization is complete.
-	 */
-	pnob->mcc_q_len = MCC_Q_LEN;
-	pnob->mcc_q_size = pnob->mcc_q_len * sizeof(struct MCC_WRB_AMAP);
-	pnob->mcc_q =  pci_alloc_consistent(adapter->pdev, pnob->mcc_q_size,
-				&pnob->mcc_q_bus);
-	if (!pnob->mcc_q_bus)
-		return -1;
-	/*
-	 * space for MCC WRB context
-	 */
-	pnob->mcc_wrb_ctxtLen = MCC_Q_LEN;
-	pnob->mcc_wrb_ctxt_size =  pnob->mcc_wrb_ctxtLen *
-		sizeof(struct be_mcc_wrb_context);
-	pnob->mcc_wrb_ctxt = (void *)__get_free_pages(GFP_KERNEL,
-		get_order(pnob->mcc_wrb_ctxt_size));
-	if (pnob->mcc_wrb_ctxt == NULL)
-		return -1;
-	/*
-	 * Space for MCC compl. ring
-	 */
-	pnob->mcc_cq_len = MCC_CQ_LEN;
-	pnob->mcc_cq_size = pnob->mcc_cq_len * sizeof(struct MCC_CQ_ENTRY_AMAP);
-	pnob->mcc_cq = pci_alloc_consistent(adapter->pdev, pnob->mcc_cq_size,
-				&pnob->mcc_cq_bus);
-	if (!pnob->mcc_cq_bus)
-		return -1;
-	return 0;
-}
-
-/*
-    This function creates the MCC request and completion ring required
-    for communicating with the ARM processor.  The caller must have
-    allocated required amount of memory for the MCC ring and MCC
-    completion ring and posted the virtual address and number of
-    entries in the corresponding members (mcc_q and mcc_cq) in the
-    NetObject struture.
-
-    When this call is completed, all further communication with
-    ARM will switch from mailbox to this ring.
-
-    pnob	- Pointer to the NetObject structure. This NetObject should
-		  have been created using a previous call to be_create_netobj()
-*/
-int be_create_mcc_rings(struct be_net_object *pnob)
-{
-	int status = 0;
-	struct ring_desc rd;
-	struct be_function_object *pfob = &pnob->fn_obj;
-
-	memset(&rd, 0, sizeof(struct ring_desc));
-	if (pnob->mcc_cq_len) {
-		rd.va = pnob->mcc_cq;
-		rd.pa = pnob->mcc_cq_bus;
-		rd.length = pnob->mcc_cq_size;
-
-		status = be_cq_create(pfob, &rd,
-			pnob->mcc_cq_len * sizeof(struct MCC_CQ_ENTRY_AMAP),
-			false,	/* solicted events,  */
-			true,	/* nodelay  */
-			0,	/* 0 Watermark since Nodelay is true */
-			&pnob->event_q_obj,
-			&pnob->mcc_cq_obj);
-
-		if (status != BE_SUCCESS)
-			return status;
-
-		pnob->mcc_cq_id = pnob->mcc_cq_obj.cq_id;
-		pnob->mcc_cq_created = 1;
-	}
-	if (pnob->mcc_q_len) {
-		rd.va = pnob->mcc_q;
-		rd.pa = pnob->mcc_q_bus;
-		rd.length = pnob->mcc_q_size;
-
-		status = be_mcc_ring_create(pfob, &rd,
-				pnob->mcc_q_len * sizeof(struct MCC_WRB_AMAP),
-				pnob->mcc_wrb_ctxt, pnob->mcc_wrb_ctxtLen,
-				&pnob->mcc_cq_obj, &pnob->mcc_q_obj);
-
-		if (status != BE_SUCCESS)
-			return status;
-
-		pnob->mcc_q_created = 1;
-	}
-	return BE_SUCCESS;
-}
-
-static int be_mcc_init(struct be_adapter *adapter)
-{
-	u32 r;
-	struct be_net_object *pnob;
-
-	pnob = adapter->net_obj;
-	memset(pnob->mcc_q, 0, pnob->mcc_q_size);
-	pnob->mcc_q_hd = 0;
-
-	memset(pnob->mcc_wrb_ctxt, 0, pnob->mcc_wrb_ctxt_size);
-
-	memset(pnob->mcc_cq, 0, pnob->mcc_cq_size);
-	pnob->mcc_cq_tl = 0;
-
-	r = be_create_mcc_rings(adapter->net_obj);
-	if (r != BE_SUCCESS)
-		return -1;
-
-	return 0;
-}
-
-static void be_remove(struct pci_dev *pdev)
-{
-	struct be_net_object *pnob;
-	struct be_adapter *adapter;
-
-	adapter = pci_get_drvdata(pdev);
-	if (!adapter)
-		return;
-
-	pci_set_drvdata(pdev, NULL);
-	pnob = (struct be_net_object *)adapter->net_obj;
-
-	flush_scheduled_work();
-
-	if (pnob) {
-		/* Unregister async callback function for link status updates */
-		if (pnob->mcc_q_created)
-			be_mcc_add_async_event_callback(&pnob->mcc_q_obj,
-								NULL, NULL);
-		netobject_cleanup(adapter, pnob);
-	}
-
-	if (adapter->csr_va)
-		iounmap(adapter->csr_va);
-	if (adapter->db_va)
-		iounmap(adapter->db_va);
-	if (adapter->pci_va)
-		iounmap(adapter->pci_va);
-
-	pci_release_regions(adapter->pdev);
-	pci_disable_device(adapter->pdev);
-
-	kfree(adapter->be_link_sts);
-	kfree(adapter->eth_statsp);
-
-	if (adapter->timer_ctxt.get_stats_timer.function)
-		del_timer_sync(&adapter->timer_ctxt.get_stats_timer);
-	kfree(adapter);
-}
-
-/*
- * This function is called by the PCI sub-system when it finds a PCI
- * device with dev/vendor IDs that match with one of our devices.
- * All of the driver initialization is done in this function.
- */
-static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
-{
-	int status = 0;
-	struct be_adapter *adapter;
-	struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD get_fwv;
-	struct be_net_object *pnob;
-	struct net_device *netdev;
-
-	status = pci_enable_device(pdev);
-	if (status)
-		goto error;
-
-	status = pci_request_regions(pdev, be_driver_name);
-	if (status)
-		goto error_pci_req;
-
-	pci_set_master(pdev);
-	adapter = kzalloc(sizeof(struct be_adapter), GFP_KERNEL);
-	if (adapter == NULL) {
-		status = -ENOMEM;
-		goto error_adapter;
-	}
-	adapter->dev_state = BE_DEV_STATE_NONE;
-	adapter->pdev = pdev;
-	pci_set_drvdata(pdev, adapter);
-
-	adapter->enable_aic = 1;
-	adapter->max_eqd = MAX_EQD;
-	adapter->min_eqd = 0;
-	adapter->cur_eqd = 0;
-
-	status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
-	if (!status) {
-		adapter->dma_64bit_cap = true;
-	} else {
-		adapter->dma_64bit_cap = false;
-		status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-		if (status != 0) {
-			printk(KERN_ERR "Could not set PCI DMA Mask\n");
-			goto cleanup;
-		}
-	}
-
-	status = init_pci_be_function(adapter, pdev);
-	if (status != 0) {
-		printk(KERN_ERR "Failed to map PCI BARS\n");
-		status = -ENOMEM;
-		goto cleanup;
-	}
-
-	be_trace_set_level(DL_ALWAYS | DL_ERR);
-
-	adapter->be_link_sts = kmalloc(sizeof(struct BE_LINK_STATUS),
-					GFP_KERNEL);
-	if (adapter->be_link_sts == NULL) {
-		printk(KERN_ERR "Memory allocation for link status "
-		       "buffer failed\n");
-		goto cleanup;
-	}
-	spin_lock_init(&adapter->txq_lock);
-
-	netdev = alloc_etherdev(sizeof(struct be_net_object));
-	if (netdev == NULL) {
-		status = -ENOMEM;
-		goto cleanup;
-	}
-	pnob = netdev_priv(netdev);
-	adapter->net_obj = pnob;
-	adapter->netdevp = netdev;
-	pnob->adapter = adapter;
-	pnob->netdev = netdev;
-
-	status = be_nob_ring_alloc(adapter, pnob);
-	if (status != 0)
-		goto cleanup;
-
-	status = be_nob_ring_init(adapter, pnob);
-	if (status != 0)
-		goto cleanup;
-
-	be_rxf_mac_address_read_write(&pnob->fn_obj, false, false, false,
-		false, false, netdev->dev_addr, NULL, NULL);
-
-	netdev->init = &benet_init;
-	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
-
-	SET_NETDEV_DEV(netdev, &(adapter->pdev->dev));
-
-	netif_napi_add(netdev, &pnob->napi, be_poll, 64);
-
-	/* if the rx_frag size if 2K, one page is shared as two RX frags */
-	pnob->rx_pg_shared =
-		(pnob->rx_buf_size <= PAGE_SIZE / 2) ? true : false;
-	if (pnob->rx_buf_size != rxbuf_size) {
-		printk(KERN_WARNING
-		       "Could not set Rx buffer size to %d. Using %d\n",
-				       rxbuf_size, pnob->rx_buf_size);
-		rxbuf_size = pnob->rx_buf_size;
-	}
-
-	tasklet_init(&(adapter->sts_handler), be_process_intr,
-		     (unsigned long)adapter);
-	adapter->tasklet_started = 1;
-	spin_lock_init(&(adapter->int_lock));
-
-	status = be_register_isr(adapter, pnob);
-	if (status != 0)
-		goto cleanup;
-
-	adapter->rx_csum = 1;
-	adapter->max_rx_coal = BE_LRO_MAX_PKTS;
-
-	memset(&get_fwv, 0,
-	       sizeof(struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD));
-	printk(KERN_INFO "BladeEngine Driver version:%s. "
-	       "Copyright ServerEngines, Corporation 2005 - 2008\n",
-			       be_drvr_ver);
-	status = be_function_get_fw_version(&pnob->fn_obj, &get_fwv, NULL,
-					    NULL);
-	if (status == BE_SUCCESS) {
-		strncpy(be_fw_ver, get_fwv.firmware_version_string, 32);
-		printk(KERN_INFO "BladeEngine Firmware Version:%s\n",
-		       get_fwv.firmware_version_string);
-	} else {
-		printk(KERN_WARNING "Unable to get BE Firmware Version\n");
-	}
-
-	sema_init(&adapter->get_eth_stat_sem, 0);
-	init_timer(&adapter->timer_ctxt.get_stats_timer);
-	atomic_set(&adapter->timer_ctxt.get_stat_flag, 0);
-	adapter->timer_ctxt.get_stats_timer.function =
-	    &be_get_stats_timer_handler;
-
-	status = be_mcc_create(adapter);
-	if (status < 0)
-		goto cleanup;
-	status = be_mcc_init(adapter);
-	if (status < 0)
-		goto cleanup;
-
-
-	status = be_mcc_add_async_event_callback(&adapter->net_obj->mcc_q_obj,
-			 be_link_status_async_callback, (void *)adapter);
-	if (status != BE_SUCCESS) {
-		printk(KERN_WARNING "add_async_event_callback failed");
-		printk(KERN_WARNING
-		       "Link status changes may not be reflected\n");
-	}
-
-	status = register_netdev(netdev);
-	if (status != 0)
-		goto cleanup;
-	be_update_link_status(adapter);
-	adapter->dev_state = BE_DEV_STATE_INIT;
-	return 0;
-
-cleanup:
-	be_remove(pdev);
-	return status;
-error_adapter:
-	pci_release_regions(pdev);
-error_pci_req:
-	pci_disable_device(pdev);
-error:
-	printk(KERN_ERR "BladeEngine initalization failed\n");
-	return status;
-}
-
-/*
- * Get the current link status and print the status on console
- */
-void be_update_link_status(struct be_adapter *adapter)
-{
-	int status;
-	struct be_net_object *pnob = adapter->net_obj;
-
-	status = be_rxf_link_status(&pnob->fn_obj, adapter->be_link_sts, NULL,
-			NULL, NULL);
-	if (status == BE_SUCCESS) {
-		if (adapter->be_link_sts->mac0_speed &&
-		    adapter->be_link_sts->mac0_duplex)
-			adapter->port0_link_sts = BE_PORT_LINK_UP;
-		else
-			adapter->port0_link_sts = BE_PORT_LINK_DOWN;
-
-		if (adapter->be_link_sts->mac1_speed &&
-		    adapter->be_link_sts->mac1_duplex)
-			adapter->port1_link_sts = BE_PORT_LINK_UP;
-		else
-			adapter->port1_link_sts = BE_PORT_LINK_DOWN;
-
-		dev_info(&pnob->netdev->dev, "Link Properties:\n");
-		be_print_link_info(adapter->be_link_sts);
-		return;
-	}
-	dev_info(&pnob->netdev->dev, "Could not get link status\n");
-	return;
-}
-
-
-#ifdef CONFIG_PM
-static void
-be_pm_cleanup(struct be_adapter *adapter,
-	      struct be_net_object *pnob, struct net_device *netdev)
-{
-	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
-
-	be_wait_nic_tx_cmplx_cmpl(pnob);
-	be_disable_eq_intr(pnob);
-
-	if (adapter->tasklet_started) {
-		tasklet_kill(&adapter->sts_handler);
-		adapter->tasklet_started = 0;
-	}
-
-	be_unregister_isr(adapter);
-	be_disable_intr(pnob);
-
-	be_tx_q_clean(pnob);
-	be_rx_q_clean(pnob);
-
-	be_destroy_netobj(pnob);
-}
-
-static int be_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct be_adapter *adapter = pci_get_drvdata(pdev);
-	struct net_device *netdev =  adapter->netdevp;
-	struct be_net_object *pnob = netdev_priv(netdev);
-
-	adapter->dev_pm_state = adapter->dev_state;
-	adapter->dev_state = BE_DEV_STATE_SUSPEND;
-
-	netif_device_detach(netdev);
-	if (netif_running(netdev))
-		be_pm_cleanup(adapter, pnob, netdev);
-
-	pci_enable_wake(pdev, 3, 1);
-	pci_enable_wake(pdev, 4, 1);	/* D3 Cold = 4 */
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	return 0;
-}
-
-static void be_up(struct be_adapter *adapter)
-{
-	struct be_net_object *pnob = adapter->net_obj;
-
-	if (pnob->num_vlans != 0)
-		be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
-			pnob->vlan_tag, NULL, NULL, NULL);
-
-}
-
-static int be_resume(struct pci_dev *pdev)
-{
-	int status = 0;
-	struct be_adapter *adapter = pci_get_drvdata(pdev);
-	struct net_device *netdev =  adapter->netdevp;
-	struct be_net_object *pnob = netdev_priv(netdev);
-
-	netif_device_detach(netdev);
-
-	status = pci_enable_device(pdev);
-	if (status)
-		return status;
-
-	pci_set_power_state(pdev, 0);
-	pci_restore_state(pdev);
-	pci_enable_wake(pdev, 3, 0);
-	pci_enable_wake(pdev, 4, 0);	/* 4 is D3 cold */
-
-	netif_carrier_on(netdev);
-	netif_start_queue(netdev);
-
-	if (netif_running(netdev)) {
-		be_rxf_mac_address_read_write(&pnob->fn_obj, false, false,
-			false, true, false, netdev->dev_addr, NULL, NULL);
-
-		status = be_nob_ring_init(adapter, pnob);
-		if (status < 0)
-			return status;
-
-		tasklet_init(&(adapter->sts_handler), be_process_intr,
-			     (unsigned long)adapter);
-		adapter->tasklet_started = 1;
-
-		if (be_register_isr(adapter, pnob) != 0) {
-			printk(KERN_ERR "be_register_isr failed\n");
-			return status;
-		}
-
-
-		status = be_mcc_init(adapter);
-		if (status < 0) {
-			printk(KERN_ERR "be_mcc_init failed\n");
-			return status;
-		}
-		be_update_link_status(adapter);
-		/*
-		 * Register async call back function to handle link
-		 * status updates
-		 */
-		status = be_mcc_add_async_event_callback(
-				&adapter->net_obj->mcc_q_obj,
-				be_link_status_async_callback, (void *)adapter);
-		if (status != BE_SUCCESS) {
-			printk(KERN_WARNING "add_async_event_callback failed");
-			printk(KERN_WARNING
-			       "Link status changes may not be reflected\n");
-		}
-		be_enable_intr(pnob);
-		be_enable_eq_intr(pnob);
-		be_up(adapter);
-	}
-	netif_device_attach(netdev);
-	adapter->dev_state = adapter->dev_pm_state;
-	return 0;
-
-}
-
-#endif
-
-/* Wait until no more pending transmits  */
-void be_wait_nic_tx_cmplx_cmpl(struct be_net_object *pnob)
-{
-	int i;
-
-	/* Wait for 20us * 50000 (= 1s) and no more */
-	i = 0;
-	while ((pnob->tx_q_tl != pnob->tx_q_hd) && (i < 50000)) {
-		++i;
-		udelay(20);
-	}
-
-	/* Check for no more pending transmits */
-	if (i >= 50000) {
-		printk(KERN_WARNING
-		       "Did not receive completions for all TX requests\n");
-	}
-}
-
-static struct pci_driver be_driver = {
-	.name = be_driver_name,
-	.id_table = be_device_id_table,
-	.probe = be_probe,
-#ifdef CONFIG_PM
-	.suspend = be_suspend,
-	.resume = be_resume,
-#endif
-	.remove = be_remove
-};
-
-/*
- * Module init entry point. Registers our our device and return.
- * Our probe will be called if the device is found.
- */
-static int __init be_init_module(void)
-{
-	int ret;
-
-	if (rxbuf_size != 8192 && rxbuf_size != 4096 && rxbuf_size != 2048) {
-		printk(KERN_WARNING
-		       "Unsupported receive buffer size (%d) requested\n",
-		       rxbuf_size);
-		printk(KERN_WARNING
-		       "Must be 2048, 4096 or 8192. Defaulting to 2048\n");
-		rxbuf_size = 2048;
-	}
-
-	ret = pci_register_driver(&be_driver);
-
-	return ret;
-}
-
-module_init(be_init_module);
-
-/*
- * be_exit_module - Driver Exit Cleanup Routine
- */
-static void __exit be_exit_module(void)
-{
-	pci_unregister_driver(&be_driver);
-}
-
-module_exit(be_exit_module);
diff --git a/drivers/staging/benet/be_int.c b/drivers/staging/benet/be_int.c
deleted file mode 100644
index cba95d09a8b..00000000000
--- a/drivers/staging/benet/be_int.c
+++ /dev/null
@@ -1,863 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include <linux/if_vlan.h>
-#include <linux/inet_lro.h>
-
-#include "benet.h"
-
-/* number of bytes of RX frame that are copied to skb->data */
-#define BE_HDR_LEN 64
-
-#define NETIF_RX(skb) netif_receive_skb(skb)
-#define VLAN_ACCEL_RX(skb, pnob, vt) \
-		vlan_hwaccel_rx(skb, pnob->vlan_grp, vt)
-
-/*
-    This function notifies BladeEngine of the number of completion
-    entries processed from the specified completion queue by writing
-    the number of popped entries to the door bell.
-
-    pnob	- Pointer to the NetObject structure
-    n		- Number of completion entries processed
-    cq_id	- Queue ID of the completion queue for which notification
-			is being done.
-    re_arm	- 1  - rearm the completion ring to generate an event.
-		- 0  - dont rearm the completion ring to generate an event
-*/
-void be_notify_cmpl(struct be_net_object *pnob, int n, int cq_id, int re_arm)
-{
-	struct CQ_DB_AMAP cqdb;
-
-	cqdb.dw[0] = 0;
-	AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, cq_id);
-	AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, re_arm);
-	AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, n);
-	PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
-}
-
-/*
- * adds additional receive frags indicated by BE starting from given
- * frag index (fi) to specified skb's frag list
- */
-static void
-add_skb_frags(struct be_net_object *pnob, struct sk_buff *skb,
-	      u32 nresid, u32 fi)
-{
-	struct be_adapter *adapter = pnob->adapter;
-	u32 sk_frag_idx, n;
-	struct be_rx_page_info *rx_page_info;
-	u32 frag_sz = pnob->rx_buf_size;
-
-	sk_frag_idx = skb_shinfo(skb)->nr_frags;
-	while (nresid) {
-		index_inc(&fi, pnob->rx_q_len);
-
-		rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
-		pnob->rx_ctxt[fi] = NULL;
-		if ((rx_page_info->page_offset) ||
-		    (pnob->rx_pg_shared == false)) {
-			pci_unmap_page(adapter->pdev,
-				       pci_unmap_addr(rx_page_info, bus),
-				       frag_sz, PCI_DMA_FROMDEVICE);
-		}
-
-		n = min(nresid, frag_sz);
-		skb_shinfo(skb)->frags[sk_frag_idx].page = rx_page_info->page;
-		skb_shinfo(skb)->frags[sk_frag_idx].page_offset
-		    = rx_page_info->page_offset;
-		skb_shinfo(skb)->frags[sk_frag_idx].size = n;
-
-		sk_frag_idx++;
-		skb->len += n;
-		skb->data_len += n;
-		skb_shinfo(skb)->nr_frags++;
-		nresid -= n;
-
-		memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-		atomic_dec(&pnob->rx_q_posted);
-	}
-}
-
-/*
- * This function processes incoming nic packets over various Rx queues.
- * This function takes the adapter, the current Rx status descriptor
- * entry and the Rx completion queue ID as argument.
- */
-static inline int process_nic_rx_completion(struct be_net_object *pnob,
-					    struct ETH_RX_COMPL_AMAP *rxcp)
-{
-	struct be_adapter *adapter = pnob->adapter;
-	struct sk_buff *skb;
-	int udpcksm, tcpcksm;
-	int n;
-	u32 nresid, fi;
-	u32 frag_sz = pnob->rx_buf_size;
-	u8 *va;
-	struct be_rx_page_info *rx_page_info;
-	u32 numfrags, vtp, vtm, vlan_tag, pktsize;
-
-	fi = AMAP_GET_BITS_PTR(ETH_RX_COMPL, fragndx, rxcp);
-	BUG_ON(fi >= (int)pnob->rx_q_len);
-	BUG_ON(fi < 0);
-
-	rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
-	BUG_ON(!rx_page_info->page);
-	pnob->rx_ctxt[fi] = NULL;
-
-	/*
-	 * If one page is used per fragment or if this is the second half of
-	 *  of the page, unmap the page here
-	 */
-	if ((rx_page_info->page_offset) || (pnob->rx_pg_shared == false)) {
-		pci_unmap_page(adapter->pdev,
-			       pci_unmap_addr(rx_page_info, bus), frag_sz,
-			       PCI_DMA_FROMDEVICE);
-	}
-
-	atomic_dec(&pnob->rx_q_posted);
-	udpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, udpcksm, rxcp);
-	tcpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, tcpcksm, rxcp);
-	pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
-	/*
-	 * get rid of RX flush completions first.
-	 */
-	if ((tcpcksm) && (udpcksm) && (pktsize == 32)) {
-		put_page(rx_page_info->page);
-		memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-		return 0;
-	}
-	skb = netdev_alloc_skb(pnob->netdev, BE_HDR_LEN + NET_IP_ALIGN);
-	if (skb == NULL) {
-		dev_info(&pnob->netdev->dev, "alloc_skb() failed\n");
-		put_page(rx_page_info->page);
-		memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-		goto free_frags;
-	}
-	skb_reserve(skb, NET_IP_ALIGN);
-
-	skb->dev = pnob->netdev;
-
-	n = min(pktsize, frag_sz);
-
-	va = page_address(rx_page_info->page) + rx_page_info->page_offset;
-	prefetch(va);
-
-	skb->len = n;
-	skb->data_len = n;
-	if (n <= BE_HDR_LEN) {
-		memcpy(skb->data, va, n);
-		put_page(rx_page_info->page);
-		skb->data_len -= n;
-		skb->tail += n;
-	} else {
-
-		/* Setup the SKB with page buffer information */
-		skb_shinfo(skb)->frags[0].page = rx_page_info->page;
-		skb_shinfo(skb)->nr_frags++;
-
-		/* Copy the header into the skb_data */
-		memcpy(skb->data, va, BE_HDR_LEN);
-		skb_shinfo(skb)->frags[0].page_offset =
-		    rx_page_info->page_offset + BE_HDR_LEN;
-		skb_shinfo(skb)->frags[0].size = n - BE_HDR_LEN;
-		skb->data_len -= BE_HDR_LEN;
-		skb->tail += BE_HDR_LEN;
-	}
-	memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-	nresid = pktsize - n;
-
-	skb->protocol = eth_type_trans(skb, pnob->netdev);
-
-	if ((tcpcksm || udpcksm) && adapter->rx_csum)
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-	else
-		skb->ip_summed = CHECKSUM_NONE;
-	/*
-	 * if we have more bytes left, the frame has been
-	 * given to us in multiple fragments.  This happens
-	 * with Jumbo frames. Add the remaining fragments to
-	 * skb->frags[] array.
-	 */
-	if (nresid)
-		add_skb_frags(pnob, skb, nresid, fi);
-
-	/* update the the true size of the skb. */
-	skb->truesize = skb->len + sizeof(struct sk_buff);
-
-	/*
-	 * If a 802.3 frame or 802.2 LLC frame
-	 * (i.e) contains length field in MAC Hdr
-	 * and frame len is greater than 64 bytes
-	 */
-	if (((skb->protocol == ntohs(ETH_P_802_2)) ||
-	     (skb->protocol == ntohs(ETH_P_802_3)))
-	    && (pktsize > BE_HDR_LEN)) {
-		/*
-		 * If the length given in Mac Hdr is less than frame size
-		 * Erraneous frame, Drop it
-		 */
-		if ((ntohs(*(u16 *) (va + 12)) + ETH_HLEN) < pktsize) {
-			/* Increment Non Ether type II frames dropped */
-			adapter->be_stat.bes_802_3_dropped_frames++;
-
-			kfree_skb(skb);
-			return 0;
-		}
-		/*
-		 * else if the length given in Mac Hdr is greater than
-		 * frame size, should not be seeing this sort of frames
-		 * dump the pkt and pass to stack
-		 */
-		else if ((ntohs(*(u16 *) (va + 12)) + ETH_HLEN) > pktsize) {
-			/* Increment Non Ether type II frames malformed */
-			adapter->be_stat.bes_802_3_malformed_frames++;
-		}
-	}
-
-	vtp = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtp, rxcp);
-	vtm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtm, rxcp);
-	if (vtp && vtm) {
-		/* Vlan tag present in pkt and BE found
-		 * that the tag matched an entry in VLAN table
-		 */
-		if (!pnob->vlan_grp || pnob->num_vlans == 0) {
-			/* But we have no VLANs configured.
-			 * This should never happen.  Drop the packet.
-			 */
-			dev_info(&pnob->netdev->dev,
-			       "BladeEngine: Unexpected vlan tagged packet\n");
-			kfree_skb(skb);
-			return 0;
-		}
-		/* pass the VLAN packet to stack */
-		vlan_tag = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vlan_tag, rxcp);
-		VLAN_ACCEL_RX(skb, pnob, be16_to_cpu(vlan_tag));
-
-	} else {
-		NETIF_RX(skb);
-	}
-	return 0;
-
-free_frags:
-	/* free all frags associated with the current rxcp */
-	numfrags = AMAP_GET_BITS_PTR(ETH_RX_COMPL, numfrags, rxcp);
-	while (numfrags-- > 1) {
-		index_inc(&fi, pnob->rx_q_len);
-
-		rx_page_info = (struct be_rx_page_info *)
-		    pnob->rx_ctxt[fi];
-		pnob->rx_ctxt[fi] = (void *)NULL;
-		if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
-			pci_unmap_page(adapter->pdev,
-				       pci_unmap_addr(rx_page_info, bus),
-				       frag_sz, PCI_DMA_FROMDEVICE);
-		}
-
-		put_page(rx_page_info->page);
-		memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-		atomic_dec(&pnob->rx_q_posted);
-	}
-	return -ENOMEM;
-}
-
-static void process_nic_rx_completion_lro(struct be_net_object *pnob,
-					  struct ETH_RX_COMPL_AMAP *rxcp)
-{
-	struct be_adapter *adapter = pnob->adapter;
-	struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
-	unsigned int udpcksm, tcpcksm;
-	u32 numfrags, vlanf, vtm, vlan_tag, nresid;
-	u16 vlant;
-	unsigned int fi, idx, n;
-	struct be_rx_page_info *rx_page_info;
-	u32 frag_sz = pnob->rx_buf_size, pktsize;
-	bool rx_coal = (adapter->max_rx_coal <= 1) ? 0 : 1;
-	u8 err, *va;
-	__wsum csum = 0;
-
-	if (AMAP_GET_BITS_PTR(ETH_RX_COMPL, ipsec, rxcp)) {
-		/*  Drop the pkt and move to the next completion.  */
-		adapter->be_stat.bes_rx_misc_pkts++;
-		return;
-	}
-	err = AMAP_GET_BITS_PTR(ETH_RX_COMPL, err, rxcp);
-	if (err || !rx_coal) {
-		/* We won't coalesce Rx pkts if the err bit set.
-		 * take the path of normal completion processing */
-		process_nic_rx_completion(pnob, rxcp);
-		return;
-	}
-
-	fi = AMAP_GET_BITS_PTR(ETH_RX_COMPL, fragndx, rxcp);
-	BUG_ON(fi >= (int)pnob->rx_q_len);
-	BUG_ON(fi < 0);
-	rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
-	BUG_ON(!rx_page_info->page);
-	pnob->rx_ctxt[fi] = (void *)NULL;
-	/*  If one page is used per fragment or if this is the
-	 * second half of the page, unmap the page here
-	 */
-	if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
-		pci_unmap_page(adapter->pdev,
-			       pci_unmap_addr(rx_page_info, bus),
-			       frag_sz, PCI_DMA_FROMDEVICE);
-	}
-
-	numfrags = AMAP_GET_BITS_PTR(ETH_RX_COMPL, numfrags, rxcp);
-	udpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, udpcksm, rxcp);
-	tcpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, tcpcksm, rxcp);
-	vlan_tag = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vlan_tag, rxcp);
-	vlant = be16_to_cpu(vlan_tag);
-	vlanf = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtp, rxcp);
-	vtm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtm, rxcp);
-	pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
-
-	atomic_dec(&pnob->rx_q_posted);
-
-	if (tcpcksm && udpcksm && pktsize == 32) {
-		/* flush completion entries */
-		put_page(rx_page_info->page);
-		memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-		return;
-	}
-	/* Only one of udpcksum and tcpcksum can be set */
-	BUG_ON(udpcksm && tcpcksm);
-
-	/* jumbo frames could come in multiple fragments */
-	BUG_ON(numfrags != ((pktsize + (frag_sz - 1)) / frag_sz));
-	n = min(pktsize, frag_sz);
-	nresid = pktsize - n;	/* will be useful for jumbo pkts */
-	idx = 0;
-
-	va = page_address(rx_page_info->page) + rx_page_info->page_offset;
-	prefetch(va);
-	rx_frags[idx].page = rx_page_info->page;
-	rx_frags[idx].page_offset = (rx_page_info->page_offset);
-	rx_frags[idx].size = n;
-	memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-
-	/* If we got multiple fragments, we have more data. */
-	while (nresid) {
-		idx++;
-		index_inc(&fi, pnob->rx_q_len);
-
-		rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
-		pnob->rx_ctxt[fi] = (void *)NULL;
-		if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
-			pci_unmap_page(adapter->pdev,
-				       pci_unmap_addr(rx_page_info, bus),
-				       frag_sz, PCI_DMA_FROMDEVICE);
-		}
-
-		n = min(nresid, frag_sz);
-		rx_frags[idx].page = rx_page_info->page;
-		rx_frags[idx].page_offset = (rx_page_info->page_offset);
-		rx_frags[idx].size = n;
-
-		nresid -= n;
-		memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-		atomic_dec(&pnob->rx_q_posted);
-	}
-
-	if (likely(!(vlanf && vtm))) {
-		lro_receive_frags(&pnob->lro_mgr, rx_frags,
-				  pktsize, pktsize,
-				  (void *)(unsigned long)csum, csum);
-	} else {
-		/* Vlan tag present in pkt and BE found
-		 * that the tag matched an entry in VLAN table
-		 */
-		if (unlikely(!pnob->vlan_grp || pnob->num_vlans == 0)) {
-			/* But we have no VLANs configured.
-			 * This should never happen.  Drop the packet.
-			 */
-			dev_info(&pnob->netdev->dev,
-			       "BladeEngine: Unexpected vlan tagged packet\n");
-			return;
-		}
-		/* pass the VLAN packet to stack */
-		lro_vlan_hwaccel_receive_frags(&pnob->lro_mgr,
-					       rx_frags, pktsize, pktsize,
-					       pnob->vlan_grp, vlant,
-					       (void *)(unsigned long)csum,
-					       csum);
-	}
-
-	adapter->be_stat.bes_rx_coal++;
-}
-
-struct ETH_RX_COMPL_AMAP *be_get_rx_cmpl(struct be_net_object *pnob)
-{
-	struct ETH_RX_COMPL_AMAP *rxcp = &pnob->rx_cq[pnob->rx_cq_tl];
-	u32 valid, ct;
-
-	valid = AMAP_GET_BITS_PTR(ETH_RX_COMPL, valid, rxcp);
-	if (valid == 0)
-		return NULL;
-
-	ct = AMAP_GET_BITS_PTR(ETH_RX_COMPL, ct, rxcp);
-	if (ct != 0) {
-		/* Invalid chute #. treat as error */
-		AMAP_SET_BITS_PTR(ETH_RX_COMPL, err, rxcp, 1);
-	}
-
-	be_adv_rxcq_tl(pnob);
-	AMAP_SET_BITS_PTR(ETH_RX_COMPL, valid, rxcp, 0);
-	return rxcp;
-}
-
-static void update_rx_rate(struct be_adapter *adapter)
-{
-	/* update the rate once in two seconds */
-	if ((jiffies - adapter->eth_rx_jiffies) > 2 * (HZ)) {
-		u32 r;
-		r = adapter->eth_rx_bytes /
-		    ((jiffies - adapter->eth_rx_jiffies) / (HZ));
-		r = (r / 1000000);	/* MB/Sec */
-
-		/* Mega Bits/Sec */
-		adapter->be_stat.bes_eth_rx_rate = (r * 8);
-		adapter->eth_rx_jiffies = jiffies;
-		adapter->eth_rx_bytes = 0;
-	}
-}
-
-static int process_rx_completions(struct be_net_object *pnob, int max_work)
-{
-	struct be_adapter *adapter = pnob->adapter;
-	struct ETH_RX_COMPL_AMAP *rxcp;
-	u32 nc = 0;
-	unsigned int pktsize;
-
-	while (max_work && (rxcp = be_get_rx_cmpl(pnob))) {
-		prefetch(rxcp);
-		pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
-		process_nic_rx_completion_lro(pnob, rxcp);
-		adapter->eth_rx_bytes += pktsize;
-		update_rx_rate(adapter);
-		nc++;
-		max_work--;
-		adapter->be_stat.bes_rx_compl++;
-	}
-	if (likely(adapter->max_rx_coal > 1)) {
-		adapter->be_stat.bes_rx_flush++;
-		lro_flush_all(&pnob->lro_mgr);
-	}
-
-	/* Refill the queue */
-	if (atomic_read(&pnob->rx_q_posted) < 900)
-		be_post_eth_rx_buffs(pnob);
-
-	return nc;
-}
-
-static struct ETH_TX_COMPL_AMAP *be_get_tx_cmpl(struct be_net_object *pnob)
-{
-	struct ETH_TX_COMPL_AMAP *txcp = &pnob->tx_cq[pnob->tx_cq_tl];
-	u32 valid;
-
-	valid = AMAP_GET_BITS_PTR(ETH_TX_COMPL, valid, txcp);
-	if (valid == 0)
-		return NULL;
-
-	AMAP_SET_BITS_PTR(ETH_TX_COMPL, valid, txcp, 0);
-	be_adv_txcq_tl(pnob);
-	return txcp;
-
-}
-
-void process_one_tx_compl(struct be_net_object *pnob, u32 end_idx)
-{
-	struct be_adapter *adapter = pnob->adapter;
-	int cur_index, tx_wrbs_completed = 0;
-	struct sk_buff *skb;
-	u64 busaddr, pa, pa_lo, pa_hi;
-	struct ETH_WRB_AMAP *wrb;
-	u32 frag_len, last_index, j;
-
-	last_index = tx_compl_lastwrb_idx_get(pnob);
-	BUG_ON(last_index != end_idx);
-	pnob->tx_ctxt[pnob->tx_q_tl] = NULL;
-	do {
-		cur_index = pnob->tx_q_tl;
-		wrb = &pnob->tx_q[cur_index];
-		pa_hi = AMAP_GET_BITS_PTR(ETH_WRB, frag_pa_hi, wrb);
-		pa_lo = AMAP_GET_BITS_PTR(ETH_WRB, frag_pa_lo, wrb);
-		frag_len = AMAP_GET_BITS_PTR(ETH_WRB, frag_len, wrb);
-		busaddr = (pa_hi << 32) | pa_lo;
-		if (busaddr != 0) {
-			pa = le64_to_cpu(busaddr);
-			pci_unmap_single(adapter->pdev, pa,
-					 frag_len, PCI_DMA_TODEVICE);
-		}
-		if (cur_index == last_index) {
-			skb = (struct sk_buff *)pnob->tx_ctxt[cur_index];
-			BUG_ON(!skb);
-			for (j = 0; j < skb_shinfo(skb)->nr_frags; j++) {
-				struct skb_frag_struct *frag;
-				frag = &skb_shinfo(skb)->frags[j];
-				pci_unmap_page(adapter->pdev,
-					       (ulong) frag->page, frag->size,
-					       PCI_DMA_TODEVICE);
-			}
-			kfree_skb(skb);
-			pnob->tx_ctxt[cur_index] = NULL;
-		} else {
-			BUG_ON(pnob->tx_ctxt[cur_index]);
-		}
-		tx_wrbs_completed++;
-		be_adv_txq_tl(pnob);
-	} while (cur_index != last_index);
-	atomic_sub(tx_wrbs_completed, &pnob->tx_q_used);
-}
-
-/* there is no need to take an SMP lock here since currently
- * we have only one instance of the tasklet that does completion
- * processing.
- */
-static void process_nic_tx_completions(struct be_net_object *pnob)
-{
-	struct be_adapter *adapter = pnob->adapter;
-	struct ETH_TX_COMPL_AMAP *txcp;
-	struct net_device *netdev = pnob->netdev;
-	u32 end_idx, num_processed = 0;
-
-	adapter->be_stat.bes_tx_events++;
-
-	while ((txcp = be_get_tx_cmpl(pnob))) {
-		end_idx = AMAP_GET_BITS_PTR(ETH_TX_COMPL, wrb_index, txcp);
-		process_one_tx_compl(pnob, end_idx);
-		num_processed++;
-		adapter->be_stat.bes_tx_compl++;
-	}
-	be_notify_cmpl(pnob, num_processed, pnob->tx_cq_id, 1);
-	/*
-	 * We got Tx completions and have usable WRBs.
-	 * If the netdev's queue has been stopped
-	 * because we had run out of WRBs, wake it now.
-	 */
-	spin_lock(&adapter->txq_lock);
-	if (netif_queue_stopped(netdev)
-	    && atomic_read(&pnob->tx_q_used) < pnob->tx_q_len / 2) {
-		netif_wake_queue(netdev);
-	}
-	spin_unlock(&adapter->txq_lock);
-}
-
-static u32 post_rx_buffs(struct be_net_object *pnob, struct list_head *rxbl)
-{
-	u32 nposted = 0;
-	struct ETH_RX_D_AMAP *rxd = NULL;
-	struct be_recv_buffer *rxbp;
-	void **rx_ctxp;
-	struct RQ_DB_AMAP rqdb;
-
-	rx_ctxp = pnob->rx_ctxt;
-
-	while (!list_empty(rxbl) &&
-	       (rx_ctxp[pnob->rx_q_hd] == NULL) && nposted < 255) {
-
-		rxbp = list_first_entry(rxbl, struct be_recv_buffer, rxb_list);
-		list_del(&rxbp->rxb_list);
-		rxd = pnob->rx_q + pnob->rx_q_hd;
-		AMAP_SET_BITS_PTR(ETH_RX_D, fragpa_lo, rxd, rxbp->rxb_pa_lo);
-		AMAP_SET_BITS_PTR(ETH_RX_D, fragpa_hi, rxd, rxbp->rxb_pa_hi);
-
-		rx_ctxp[pnob->rx_q_hd] = rxbp->rxb_ctxt;
-		be_adv_rxq_hd(pnob);
-		nposted++;
-	}
-
-	if (nposted) {
-		/* Now press the door bell to notify BladeEngine. */
-		rqdb.dw[0] = 0;
-		AMAP_SET_BITS_PTR(RQ_DB, numPosted, &rqdb, nposted);
-		AMAP_SET_BITS_PTR(RQ_DB, rq, &rqdb, pnob->rx_q_id);
-		PD_WRITE(&pnob->fn_obj, erx_rq_db, rqdb.dw[0]);
-	}
-	atomic_add(nposted, &pnob->rx_q_posted);
-	return nposted;
-}
-
-void be_post_eth_rx_buffs(struct be_net_object *pnob)
-{
-	struct be_adapter *adapter = pnob->adapter;
-	u32 num_bufs, r;
-	u64 busaddr = 0, tmp_pa;
-	u32 max_bufs, pg_hd;
-	u32 frag_size;
-	struct be_recv_buffer *rxbp;
-	struct list_head rxbl;
-	struct be_rx_page_info *rx_page_info;
-	struct page *page = NULL;
-	u32 page_order = 0;
-	gfp_t alloc_flags = GFP_ATOMIC;
-
-	BUG_ON(!adapter);
-
-	max_bufs = 64;		/* should be even # <= 255. */
-
-	frag_size = pnob->rx_buf_size;
-	page_order = get_order(frag_size);
-
-	if (frag_size == 8192)
-		alloc_flags |= (gfp_t) __GFP_COMP;
-	/*
-	 * Form a linked list of RECV_BUFFFER structure to be be posted.
-	 * We will post even number of buffer so that pages can be
-	 * shared.
-	 */
-	INIT_LIST_HEAD(&rxbl);
-
-	for (num_bufs = 0; num_bufs < max_bufs &&
-		!pnob->rx_page_info[pnob->rx_pg_info_hd].page; ++num_bufs) {
-
-		rxbp = &pnob->eth_rx_bufs[num_bufs];
-		pg_hd = pnob->rx_pg_info_hd;
-		rx_page_info = &pnob->rx_page_info[pg_hd];
-
-		if (!page) {
-			page = alloc_pages(alloc_flags, page_order);
-			if (unlikely(page == NULL)) {
-				adapter->be_stat.bes_ethrx_post_fail++;
-				pnob->rxbuf_post_fail++;
-				break;
-			}
-			pnob->rxbuf_post_fail = 0;
-			busaddr = pci_map_page(adapter->pdev, page, 0,
-					       frag_size, PCI_DMA_FROMDEVICE);
-			rx_page_info->page_offset = 0;
-			rx_page_info->page = page;
-			/*
-			 * If we are sharing a page among two skbs,
-			 * alloc a new one on the next iteration
-			 */
-			if (pnob->rx_pg_shared == false)
-				page = NULL;
-		} else {
-			get_page(page);
-			rx_page_info->page_offset += frag_size;
-			rx_page_info->page = page;
-			/*
-			 * We are finished with the alloced page,
-			 * Alloc a new one on the next iteration
-			 */
-			page = NULL;
-		}
-		rxbp->rxb_ctxt = (void *)rx_page_info;
-		index_inc(&pnob->rx_pg_info_hd, pnob->rx_q_len);
-
-		pci_unmap_addr_set(rx_page_info, bus, busaddr);
-		tmp_pa = busaddr + rx_page_info->page_offset;
-		rxbp->rxb_pa_lo = (tmp_pa & 0xFFFFFFFF);
-		rxbp->rxb_pa_hi = (tmp_pa >> 32);
-		rxbp->rxb_len = frag_size;
-		list_add_tail(&rxbp->rxb_list, &rxbl);
-	}			/* End of for */
-
-	r = post_rx_buffs(pnob, &rxbl);
-	BUG_ON(r != num_bufs);
-	return;
-}
-
-/*
- * Interrupt service for network function.  We just schedule the
- * tasklet which does all completion processing.
- */
-irqreturn_t be_int(int irq, void *dev)
-{
-	struct net_device *netdev = dev;
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-	u32 isr;
-
-	isr = CSR_READ(&pnob->fn_obj, cev.isr1);
-	if (unlikely(!isr))
-		return IRQ_NONE;
-
-	spin_lock(&adapter->int_lock);
-	adapter->isr |= isr;
-	spin_unlock(&adapter->int_lock);
-
-	adapter->be_stat.bes_ints++;
-
-	tasklet_schedule(&adapter->sts_handler);
-	return IRQ_HANDLED;
-}
-
-/*
- * Poll function called by NAPI with a work budget.
- * We process as many UC. BC and MC receive completions
- * as the budget allows and return the actual number of
- * RX ststutses processed.
- */
-int be_poll(struct napi_struct *napi, int budget)
-{
-	struct be_net_object *pnob =
-			container_of(napi, struct be_net_object, napi);
-	u32 work_done;
-
-	pnob->adapter->be_stat.bes_polls++;
-	work_done = process_rx_completions(pnob, budget);
-	BUG_ON(work_done > budget);
-
-	/* All consumed */
-	if (work_done < budget) {
-		netif_rx_complete(napi);
-		/* enable intr */
-		be_notify_cmpl(pnob, work_done, pnob->rx_cq_id, 1);
-	} else {
-		/* More to be consumed; continue with interrupts disabled */
-		be_notify_cmpl(pnob, work_done, pnob->rx_cq_id, 0);
-	}
-	return work_done;
-}
-
-static struct EQ_ENTRY_AMAP *get_event(struct be_net_object *pnob)
-{
-	struct EQ_ENTRY_AMAP *eqp = &(pnob->event_q[pnob->event_q_tl]);
-	if (!AMAP_GET_BITS_PTR(EQ_ENTRY, Valid, eqp))
-		return NULL;
-	be_adv_eq_tl(pnob);
-	return eqp;
-}
-
-/*
- * Processes all valid events in the event ring associated with given
- * NetObject.  Also, notifies BE the number of events processed.
- */
-static inline u32 process_events(struct be_net_object *pnob)
-{
-	struct be_adapter *adapter = pnob->adapter;
-	struct EQ_ENTRY_AMAP *eqp;
-	u32 rid, num_events = 0;
-	struct net_device *netdev = pnob->netdev;
-
-	while ((eqp = get_event(pnob)) != NULL) {
-		adapter->be_stat.bes_events++;
-		rid = AMAP_GET_BITS_PTR(EQ_ENTRY, ResourceID, eqp);
-		if (rid == pnob->rx_cq_id) {
-			adapter->be_stat.bes_rx_events++;
-			netif_rx_schedule(&pnob->napi);
-		} else if (rid == pnob->tx_cq_id) {
-			process_nic_tx_completions(pnob);
-		} else if (rid == pnob->mcc_cq_id) {
-			be_mcc_process_cq(&pnob->mcc_q_obj, 1);
-		} else {
-			dev_info(&netdev->dev,
-					"Invalid EQ ResourceID %d\n", rid);
-		}
-		AMAP_SET_BITS_PTR(EQ_ENTRY, Valid, eqp, 0);
-		AMAP_SET_BITS_PTR(EQ_ENTRY, ResourceID, eqp, 0);
-		num_events++;
-	}
-	return num_events;
-}
-
-static void update_eqd(struct be_adapter *adapter, struct be_net_object *pnob)
-{
-	int status;
-	struct be_eq_object *eq_objectp;
-
-	/* update once a second */
-	if ((jiffies - adapter->ips_jiffies) > 1 * (HZ)) {
-		/* One second elapsed since last update  */
-		u32 r, new_eqd = -1;
-		r = adapter->be_stat.bes_ints - adapter->be_stat.bes_prev_ints;
-		r = r / ((jiffies - adapter->ips_jiffies) / (HZ));
-		adapter->be_stat.bes_ips = r;
-		adapter->ips_jiffies = jiffies;
-		adapter->be_stat.bes_prev_ints = adapter->be_stat.bes_ints;
-		if (r > IPS_HI_WM && adapter->cur_eqd < adapter->max_eqd)
-			new_eqd = (adapter->cur_eqd + 8);
-		if (r < IPS_LO_WM && adapter->cur_eqd > adapter->min_eqd)
-			new_eqd = (adapter->cur_eqd - 8);
-		if (adapter->enable_aic && new_eqd != -1) {
-			eq_objectp = &pnob->event_q_obj;
-			status = be_eq_modify_delay(&pnob->fn_obj, 1,
-						    &eq_objectp, &new_eqd, NULL,
-						    NULL, NULL);
-			if (status == BE_SUCCESS)
-				adapter->cur_eqd = new_eqd;
-		}
-	}
-}
-
-/*
-    This function notifies BladeEngine of how many events were processed
-    from the event queue by ringing the corresponding door bell and
-    optionally re-arms the event queue.
-    n		- number of events processed
-    re_arm	- 1 - re-arm the EQ, 0 - do not re-arm the EQ
-
-*/
-static void be_notify_event(struct be_net_object *pnob, int n, int re_arm)
-{
-	struct CQ_DB_AMAP eqdb;
-	eqdb.dw[0] = 0;
-
-	AMAP_SET_BITS_PTR(CQ_DB, qid, &eqdb, pnob->event_q_id);
-	AMAP_SET_BITS_PTR(CQ_DB, rearm, &eqdb, re_arm);
-	AMAP_SET_BITS_PTR(CQ_DB, event, &eqdb, 1);
-	AMAP_SET_BITS_PTR(CQ_DB, num_popped, &eqdb, n);
-	/*
-	 * Under some situations we see an interrupt and no valid
-	 * EQ entry.  To keep going, we need to ring the DB even if
-	 * numPOsted is 0.
-	 */
-	PD_WRITE(&pnob->fn_obj, cq_db, eqdb.dw[0]);
-	return;
-}
-
-/*
- * Called from the tasklet scheduled by ISR.  All real interrupt processing
- * is done here.
- */
-void be_process_intr(unsigned long context)
-{
-	struct be_adapter *adapter = (struct be_adapter *)context;
-	struct be_net_object *pnob = adapter->net_obj;
-	u32 isr, n;
-	ulong flags = 0;
-
-	isr = adapter->isr;
-
-	/*
-	 * we create only one NIC event queue in Linux. Event is
-	 * expected only in the first event queue
-	 */
-	BUG_ON(isr & 0xfffffffe);
-	if ((isr & 1) == 0)
-		return;		/* not our interrupt */
-	n = process_events(pnob);
-	/*
-	 * Clear the event bit. adapter->isr is  set by
-	 * hard interrupt.  Prevent race with lock.
-	 */
-	spin_lock_irqsave(&adapter->int_lock, flags);
-	adapter->isr &= ~1;
-	spin_unlock_irqrestore(&adapter->int_lock, flags);
-	be_notify_event(pnob, n, 1);
-	/*
-	 * If previous allocation attempts had failed and
-	 * BE has used up all posted buffers, post RX buffers here
-	 */
-	if (pnob->rxbuf_post_fail && atomic_read(&pnob->rx_q_posted) == 0)
-		be_post_eth_rx_buffs(pnob);
-	update_eqd(adapter, pnob);
-	return;
-}
diff --git a/drivers/staging/benet/be_netif.c b/drivers/staging/benet/be_netif.c
deleted file mode 100644
index 2b8daf63dc7..00000000000
--- a/drivers/staging/benet/be_netif.c
+++ /dev/null
@@ -1,705 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * be_netif.c
- *
- * This file contains various entry points of drivers seen by tcp/ip stack.
- */
-
-#include <linux/if_vlan.h>
-#include <linux/in.h>
-#include "benet.h"
-#include <linux/ip.h>
-#include <linux/inet_lro.h>
-
-/* Strings to print Link properties */
-static const char *link_speed[] = {
-	"Invalid link Speed Value",
-	"10 Mbps",
-	"100 Mbps",
-	"1 Gbps",
-	"10 Gbps"
-};
-
-static const char *link_duplex[] = {
-	"Invalid Duplex Value",
-	"Half Duplex",
-	"Full Duplex"
-};
-
-static const char *link_state[] = {
-	"",
-	"(active)"
-};
-
-void be_print_link_info(struct BE_LINK_STATUS *lnk_status)
-{
-	u16 si, di, ai;
-
-	/* Port 0 */
-	if (lnk_status->mac0_speed && lnk_status->mac0_duplex) {
-		/* Port is up and running */
-		si = (lnk_status->mac0_speed < 5) ? lnk_status->mac0_speed : 0;
-		di = (lnk_status->mac0_duplex < 3) ?
-		    lnk_status->mac0_duplex : 0;
-		ai = (lnk_status->active_port == 0) ? 1 : 0;
-		printk(KERN_INFO "PortNo. 0: Speed - %s %s %s\n",
-		       link_speed[si], link_duplex[di], link_state[ai]);
-	} else
-		printk(KERN_INFO "PortNo. 0: Down\n");
-
-	/* Port 1 */
-	if (lnk_status->mac1_speed && lnk_status->mac1_duplex) {
-		/* Port is up and running */
-		si = (lnk_status->mac1_speed < 5) ? lnk_status->mac1_speed : 0;
-		di = (lnk_status->mac1_duplex < 3) ?
-		    lnk_status->mac1_duplex : 0;
-		ai = (lnk_status->active_port == 0) ? 1 : 0;
-		printk(KERN_INFO "PortNo. 1: Speed - %s %s %s\n",
-		       link_speed[si], link_duplex[di], link_state[ai]);
-	} else
-		printk(KERN_INFO "PortNo. 1: Down\n");
-
-	return;
-}
-
-static int
-be_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
-		   void **ip_hdr, void **tcpudp_hdr,
-		   u64 *hdr_flags, void *priv)
-{
-	struct ethhdr *eh;
-	struct vlan_ethhdr *veh;
-	struct iphdr *iph;
-	u8 *va = page_address(frag->page) + frag->page_offset;
-	unsigned long ll_hlen;
-
-	/* find the mac header, abort if not IPv4 */
-
-	prefetch(va);
-	eh = (struct ethhdr *)va;
-	*mac_hdr = eh;
-	ll_hlen = ETH_HLEN;
-	if (eh->h_proto != htons(ETH_P_IP)) {
-		if (eh->h_proto == htons(ETH_P_8021Q)) {
-			veh = (struct vlan_ethhdr *)va;
-			if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
-				return -1;
-
-			ll_hlen += VLAN_HLEN;
-
-		} else {
-			return -1;
-		}
-	}
-	*hdr_flags = LRO_IPV4;
-
-	iph = (struct iphdr *)(va + ll_hlen);
-	*ip_hdr = iph;
-	if (iph->protocol != IPPROTO_TCP)
-		return -1;
-	*hdr_flags |= LRO_TCP;
-	*tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
-
-	return 0;
-}
-
-static int benet_open(struct net_device *netdev)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-	struct net_lro_mgr *lro_mgr;
-
-	if (adapter->dev_state < BE_DEV_STATE_INIT)
-		return -EAGAIN;
-
-	lro_mgr = &pnob->lro_mgr;
-	lro_mgr->dev = netdev;
-
-	lro_mgr->features = LRO_F_NAPI;
-	lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
-	lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
-	lro_mgr->max_desc = BE_MAX_LRO_DESCRIPTORS;
-	lro_mgr->lro_arr = pnob->lro_desc;
-	lro_mgr->get_frag_header = be_get_frag_header;
-	lro_mgr->max_aggr = adapter->max_rx_coal;
-	lro_mgr->frag_align_pad = 2;
-	if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
-		lro_mgr->max_aggr = MAX_SKB_FRAGS;
-
-	adapter->max_rx_coal = BE_LRO_MAX_PKTS;
-
-	be_update_link_status(adapter);
-
-	/*
-	 * Set carrier on only if Physical Link up
-	 * Either of the port link status up signifies this
-	 */
-	if ((adapter->port0_link_sts == BE_PORT_LINK_UP) ||
-	    (adapter->port1_link_sts == BE_PORT_LINK_UP)) {
-		netif_start_queue(netdev);
-		netif_carrier_on(netdev);
-	}
-
-	adapter->dev_state = BE_DEV_STATE_OPEN;
-	napi_enable(&pnob->napi);
-	be_enable_intr(pnob);
-	be_enable_eq_intr(pnob);
-	/*
-	 * RX completion queue may be in dis-armed state. Arm it.
-	 */
-	be_notify_cmpl(pnob, 0, pnob->rx_cq_id, 1);
-
-	return 0;
-}
-
-static int benet_close(struct net_device *netdev)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-
-	netif_stop_queue(netdev);
-	synchronize_irq(netdev->irq);
-
-	be_wait_nic_tx_cmplx_cmpl(pnob);
-	adapter->dev_state = BE_DEV_STATE_INIT;
-	netif_carrier_off(netdev);
-
-	adapter->port0_link_sts = BE_PORT_LINK_DOWN;
-	adapter->port1_link_sts = BE_PORT_LINK_DOWN;
-	be_disable_intr(pnob);
-	be_disable_eq_intr(pnob);
-	napi_disable(&pnob->napi);
-
-	return 0;
-}
-
-/*
- * Setting a Mac Address for BE
- * Takes netdev and a void pointer as arguments.
- * The pointer holds the new addres to be used.
- */
-static int benet_set_mac_addr(struct net_device *netdev, void *p)
-{
-	struct sockaddr *addr = p;
-	struct be_net_object *pnob = netdev_priv(netdev);
-
-	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-	be_rxf_mac_address_read_write(&pnob->fn_obj, 0, 0, false, true, false,
-				netdev->dev_addr, NULL, NULL);
-	/*
-	 * Since we are doing Active-Passive failover, both
-	 * ports should have matching MAC addresses everytime.
-	 */
-	be_rxf_mac_address_read_write(&pnob->fn_obj, 1, 0, false, true, false,
-				      netdev->dev_addr, NULL, NULL);
-
-	return 0;
-}
-
-void be_get_stats_timer_handler(unsigned long context)
-{
-	struct be_timer_ctxt *ctxt = (struct be_timer_ctxt *)context;
-
-	if (atomic_read(&ctxt->get_stat_flag)) {
-		atomic_dec(&ctxt->get_stat_flag);
-		up((void *)ctxt->get_stat_sem_addr);
-	}
-	del_timer(&ctxt->get_stats_timer);
-	return;
-}
-
-void be_get_stat_cb(void *context, int status,
-		    struct MCC_WRB_AMAP *optional_wrb)
-{
-	struct be_timer_ctxt *ctxt = (struct be_timer_ctxt *)context;
-	/*
-	 * just up the semaphore if the get_stat_flag
-	 * reads 1. so that the waiter can continue.
-	 * If it is 0, then it was handled by the timer handler.
-	 */
-	del_timer(&ctxt->get_stats_timer);
-	if (atomic_read(&ctxt->get_stat_flag)) {
-		atomic_dec(&ctxt->get_stat_flag);
-		up((void *)ctxt->get_stat_sem_addr);
-	}
-}
-
-struct net_device_stats *benet_get_stats(struct net_device *dev)
-{
-	struct be_net_object *pnob = netdev_priv(dev);
-	struct be_adapter *adapter = pnob->adapter;
-	u64 pa;
-	struct be_timer_ctxt *ctxt = &adapter->timer_ctxt;
-
-	if (adapter->dev_state != BE_DEV_STATE_OPEN) {
-		/* Return previously read stats */
-		return &(adapter->benet_stats);
-	}
-	/* Get Physical Addr */
-	pa = pci_map_single(adapter->pdev, adapter->eth_statsp,
-			    sizeof(struct FWCMD_ETH_GET_STATISTICS),
-			    PCI_DMA_FROMDEVICE);
-	ctxt->get_stat_sem_addr = (unsigned long)&adapter->get_eth_stat_sem;
-	atomic_inc(&ctxt->get_stat_flag);
-
-	be_rxf_query_eth_statistics(&pnob->fn_obj, adapter->eth_statsp,
-				    cpu_to_le64(pa), be_get_stat_cb, ctxt,
-				    NULL);
-
-	ctxt->get_stats_timer.data = (unsigned long)ctxt;
-	mod_timer(&ctxt->get_stats_timer, (jiffies + (HZ * 2)));
-	down((void *)ctxt->get_stat_sem_addr);	/* callback will unblock us */
-
-	/* Adding port0 and port1 stats. */
-	adapter->benet_stats.rx_packets =
-	    adapter->eth_statsp->params.response.p0recvdtotalframes +
-	    adapter->eth_statsp->params.response.p1recvdtotalframes;
-	adapter->benet_stats.tx_packets =
-	    adapter->eth_statsp->params.response.p0xmitunicastframes +
-	    adapter->eth_statsp->params.response.p1xmitunicastframes;
-	adapter->benet_stats.tx_bytes =
-	    adapter->eth_statsp->params.response.p0xmitbyteslsd +
-	    adapter->eth_statsp->params.response.p1xmitbyteslsd;
-	adapter->benet_stats.rx_errors =
-	    adapter->eth_statsp->params.response.p0crcerrors +
-	    adapter->eth_statsp->params.response.p1crcerrors;
-	adapter->benet_stats.rx_errors +=
-	    adapter->eth_statsp->params.response.p0alignmentsymerrs +
-	    adapter->eth_statsp->params.response.p1alignmentsymerrs;
-	adapter->benet_stats.rx_errors +=
-	    adapter->eth_statsp->params.response.p0inrangelenerrors +
-	    adapter->eth_statsp->params.response.p1inrangelenerrors;
-	adapter->benet_stats.rx_bytes =
-	    adapter->eth_statsp->params.response.p0recvdtotalbytesLSD +
-	    adapter->eth_statsp->params.response.p1recvdtotalbytesLSD;
-	adapter->benet_stats.rx_crc_errors =
-	    adapter->eth_statsp->params.response.p0crcerrors +
-	    adapter->eth_statsp->params.response.p1crcerrors;
-
-	adapter->benet_stats.tx_packets +=
-	    adapter->eth_statsp->params.response.p0xmitmulticastframes +
-	    adapter->eth_statsp->params.response.p1xmitmulticastframes;
-	adapter->benet_stats.tx_packets +=
-	    adapter->eth_statsp->params.response.p0xmitbroadcastframes +
-	    adapter->eth_statsp->params.response.p1xmitbroadcastframes;
-	adapter->benet_stats.tx_errors = 0;
-
-	adapter->benet_stats.multicast =
-	    adapter->eth_statsp->params.response.p0xmitmulticastframes +
-	    adapter->eth_statsp->params.response.p1xmitmulticastframes;
-
-	adapter->benet_stats.rx_fifo_errors =
-	    adapter->eth_statsp->params.response.p0rxfifooverflowdropped +
-	    adapter->eth_statsp->params.response.p1rxfifooverflowdropped;
-	adapter->benet_stats.rx_frame_errors =
-	    adapter->eth_statsp->params.response.p0alignmentsymerrs +
-	    adapter->eth_statsp->params.response.p1alignmentsymerrs;
-	adapter->benet_stats.rx_length_errors =
-	    adapter->eth_statsp->params.response.p0inrangelenerrors +
-	    adapter->eth_statsp->params.response.p1inrangelenerrors;
-	adapter->benet_stats.rx_length_errors +=
-	    adapter->eth_statsp->params.response.p0outrangeerrors +
-	    adapter->eth_statsp->params.response.p1outrangeerrors;
-	adapter->benet_stats.rx_length_errors +=
-	    adapter->eth_statsp->params.response.p0frametoolongerrors +
-	    adapter->eth_statsp->params.response.p1frametoolongerrors;
-
-	pci_unmap_single(adapter->pdev, (ulong) adapter->eth_statsp,
-			 sizeof(struct FWCMD_ETH_GET_STATISTICS),
-			 PCI_DMA_FROMDEVICE);
-	return &(adapter->benet_stats);
-
-}
-
-static void be_start_tx(struct be_net_object *pnob, u32 nposted)
-{
-#define CSR_ETH_MAX_SQPOSTS 255
-	struct SQ_DB_AMAP sqdb;
-
-	sqdb.dw[0] = 0;
-
-	AMAP_SET_BITS_PTR(SQ_DB, cid, &sqdb, pnob->tx_q_id);
-	while (nposted) {
-		if (nposted > CSR_ETH_MAX_SQPOSTS) {
-			AMAP_SET_BITS_PTR(SQ_DB, numPosted, &sqdb,
-					  CSR_ETH_MAX_SQPOSTS);
-			nposted -= CSR_ETH_MAX_SQPOSTS;
-		} else {
-			AMAP_SET_BITS_PTR(SQ_DB, numPosted, &sqdb, nposted);
-			nposted = 0;
-		}
-		PD_WRITE(&pnob->fn_obj, etx_sq_db, sqdb.dw[0]);
-	}
-
-	return;
-}
-
-static void update_tx_rate(struct be_adapter *adapter)
-{
-	/* update the rate once in two seconds */
-	if ((jiffies - adapter->eth_tx_jiffies) > 2 * (HZ)) {
-		u32 r;
-		r = adapter->eth_tx_bytes /
-		    ((jiffies - adapter->eth_tx_jiffies) / (HZ));
-		r = (r / 1000000);	/* M bytes/s */
-		adapter->be_stat.bes_eth_tx_rate = (r * 8); /* M bits/s */
-		adapter->eth_tx_jiffies = jiffies;
-		adapter->eth_tx_bytes = 0;
-	}
-}
-
-static int wrb_cnt_in_skb(struct sk_buff *skb)
-{
-	int cnt = 0;
-	while (skb) {
-		if (skb->len > skb->data_len)
-			cnt++;
-		cnt += skb_shinfo(skb)->nr_frags;
-		skb = skb_shinfo(skb)->frag_list;
-	}
-	BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT);
-	return cnt;
-}
-
-static void wrb_fill(struct ETH_WRB_AMAP *wrb, u64 addr, int len)
-{
-	AMAP_SET_BITS_PTR(ETH_WRB, frag_pa_hi, wrb, addr >> 32);
-	AMAP_SET_BITS_PTR(ETH_WRB, frag_pa_lo, wrb, addr & 0xFFFFFFFF);
-	AMAP_SET_BITS_PTR(ETH_WRB, frag_len, wrb, len);
-}
-
-static void wrb_fill_extra(struct ETH_WRB_AMAP *wrb, struct sk_buff *skb,
-			   struct be_net_object *pnob)
-{
-	wrb->dw[2] = 0;
-	wrb->dw[3] = 0;
-	AMAP_SET_BITS_PTR(ETH_WRB, crc, wrb, 1);
-	if (skb_shinfo(skb)->gso_segs > 1 && skb_shinfo(skb)->gso_size) {
-		AMAP_SET_BITS_PTR(ETH_WRB, lso, wrb, 1);
-		AMAP_SET_BITS_PTR(ETH_WRB, lso_mss, wrb,
-				  skb_shinfo(skb)->gso_size);
-	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		u8 proto = ((struct iphdr *)ip_hdr(skb))->protocol;
-		if (proto == IPPROTO_TCP)
-			AMAP_SET_BITS_PTR(ETH_WRB, tcpcs, wrb, 1);
-		else if (proto == IPPROTO_UDP)
-			AMAP_SET_BITS_PTR(ETH_WRB, udpcs, wrb, 1);
-	}
-	if (pnob->vlan_grp && vlan_tx_tag_present(skb)) {
-		AMAP_SET_BITS_PTR(ETH_WRB, vlan, wrb, 1);
-		AMAP_SET_BITS_PTR(ETH_WRB, vlan_tag, wrb, vlan_tx_tag_get(skb));
-	}
-}
-
-static inline void wrb_copy_extra(struct ETH_WRB_AMAP *to,
-				  struct ETH_WRB_AMAP *from)
-{
-
-	to->dw[2] = from->dw[2];
-	to->dw[3] = from->dw[3];
-}
-
-/* Returns the actual count of wrbs used including a possible dummy */
-static int copy_skb_to_txq(struct be_net_object *pnob, struct sk_buff *skb,
-			   u32 wrb_cnt, u32 *copied)
-{
-	u64 busaddr;
-	struct ETH_WRB_AMAP *wrb = NULL, *first = NULL;
-	u32 i;
-	bool dummy = true;
-	struct pci_dev *pdev = pnob->adapter->pdev;
-
-	if (wrb_cnt & 1)
-		wrb_cnt++;
-	else
-		dummy = false;
-
-	atomic_add(wrb_cnt, &pnob->tx_q_used);
-
-	while (skb) {
-		if (skb->len > skb->data_len) {
-			int len = skb->len - skb->data_len;
-			busaddr = pci_map_single(pdev, skb->data, len,
-						 PCI_DMA_TODEVICE);
-			busaddr = cpu_to_le64(busaddr);
-			wrb = &pnob->tx_q[pnob->tx_q_hd];
-			if (first == NULL) {
-				wrb_fill_extra(wrb, skb, pnob);
-				first = wrb;
-			} else {
-				wrb_copy_extra(wrb, first);
-			}
-			wrb_fill(wrb, busaddr, len);
-			be_adv_txq_hd(pnob);
-			*copied += len;
-		}
-
-		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-			struct skb_frag_struct *frag =
-			    &skb_shinfo(skb)->frags[i];
-			busaddr = pci_map_page(pdev, frag->page,
-					       frag->page_offset, frag->size,
-					       PCI_DMA_TODEVICE);
-			busaddr = cpu_to_le64(busaddr);
-			wrb = &pnob->tx_q[pnob->tx_q_hd];
-			if (first == NULL) {
-				wrb_fill_extra(wrb, skb, pnob);
-				first = wrb;
-			} else {
-				wrb_copy_extra(wrb, first);
-			}
-			wrb_fill(wrb, busaddr, frag->size);
-			be_adv_txq_hd(pnob);
-			*copied += frag->size;
-		}
-		skb = skb_shinfo(skb)->frag_list;
-	}
-
-	if (dummy) {
-		wrb = &pnob->tx_q[pnob->tx_q_hd];
-		BUG_ON(first == NULL);
-		wrb_copy_extra(wrb, first);
-		wrb_fill(wrb, 0, 0);
-		be_adv_txq_hd(pnob);
-	}
-	AMAP_SET_BITS_PTR(ETH_WRB, complete, wrb, 1);
-	AMAP_SET_BITS_PTR(ETH_WRB, last, wrb, 1);
-	return wrb_cnt;
-}
-
-/* For each skb transmitted, tx_ctxt stores the num of wrbs in the
- * start index and skb pointer in the end index
- */
-static inline void be_tx_wrb_info_remember(struct be_net_object *pnob,
-					   struct sk_buff *skb, int wrb_cnt,
-					   u32 start)
-{
-	*(u32 *) (&pnob->tx_ctxt[start]) = wrb_cnt;
-	index_adv(&start, wrb_cnt - 1, pnob->tx_q_len);
-	pnob->tx_ctxt[start] = skb;
-}
-
-static int benet_xmit(struct sk_buff *skb, struct net_device *netdev)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-	u32 wrb_cnt, copied = 0;
-	u32 start = pnob->tx_q_hd;
-
-	adapter->be_stat.bes_tx_reqs++;
-
-	wrb_cnt = wrb_cnt_in_skb(skb);
-	spin_lock_bh(&adapter->txq_lock);
-	if ((pnob->tx_q_len - 2 - atomic_read(&pnob->tx_q_used)) <= wrb_cnt) {
-		netif_stop_queue(pnob->netdev);
-		spin_unlock_bh(&adapter->txq_lock);
-		adapter->be_stat.bes_tx_fails++;
-		return NETDEV_TX_BUSY;
-	}
-	spin_unlock_bh(&adapter->txq_lock);
-
-	wrb_cnt = copy_skb_to_txq(pnob, skb, wrb_cnt, &copied);
-	be_tx_wrb_info_remember(pnob, skb, wrb_cnt, start);
-
-	be_start_tx(pnob, wrb_cnt);
-
-	adapter->eth_tx_bytes += copied;
-	adapter->be_stat.bes_tx_wrbs += wrb_cnt;
-	update_tx_rate(adapter);
-	netdev->trans_start = jiffies;
-
-	return NETDEV_TX_OK;
-}
-
-/*
- * This is the driver entry point to change the mtu of the device
- * Returns 0 for success and errno for failure.
- */
-static int benet_change_mtu(struct net_device *netdev, int new_mtu)
-{
-	/*
-	 * BE supports jumbo frame size upto 9000 bytes including the link layer
-	 * header. Considering the different variants of frame formats possible
-	 * like VLAN, SNAP/LLC, the maximum possible value for MTU is 8974 bytes
-	 */
-
-	if (new_mtu < (ETH_ZLEN + ETH_FCS_LEN) || (new_mtu > BE_MAX_MTU)) {
-		dev_info(&netdev->dev, "Invalid MTU requested. "
-			       "Must be between %d and %d bytes\n",
-				       (ETH_ZLEN + ETH_FCS_LEN), BE_MAX_MTU);
-		return -EINVAL;
-	}
-	dev_info(&netdev->dev, "MTU changed from %d to %d\n",
-						netdev->mtu, new_mtu);
-	netdev->mtu = new_mtu;
-	return 0;
-}
-
-/*
- * This is the driver entry point to register a vlan with the device
- */
-static void benet_vlan_register(struct net_device *netdev,
-				struct vlan_group *grp)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-
-	be_disable_eq_intr(pnob);
-	pnob->vlan_grp = grp;
-	pnob->num_vlans = 0;
-	be_enable_eq_intr(pnob);
-}
-
-/*
- * This is the driver entry point to add a vlan vlan_id
- * with the device netdev
- */
-static void benet_vlan_add_vid(struct net_device *netdev, u16 vlan_id)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-
-	if (pnob->num_vlans == (BE_NUM_VLAN_SUPPORTED - 1)) {
-		/* no  way to return an error */
-		dev_info(&netdev->dev,
-		       "BladeEngine: Cannot configure more than %d Vlans\n",
-			       BE_NUM_VLAN_SUPPORTED);
-		return;
-	}
-	/* The new vlan tag will be in the slot indicated by num_vlans. */
-	pnob->vlan_tag[pnob->num_vlans++] = vlan_id;
-	be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
-			   pnob->vlan_tag, NULL, NULL, NULL);
-}
-
-/*
- * This is the driver entry point to remove a vlan vlan_id
- * with the device netdev
- */
-static void benet_vlan_rem_vid(struct net_device *netdev, u16 vlan_id)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-
-	u32 i, value;
-
-	/*
-	 * In Blade Engine, we support 32 vlan tag filters across both ports.
-	 * To program a vlan tag, the RXF_RTPR_CSR register is used.
-	 * Each 32-bit value of RXF_RTDR_CSR can address 2 vlan tag entries.
-	 * The Vlan table is of depth 16. thus we support 32 tags.
-	 */
-
-	value = vlan_id | VLAN_VALID_BIT;
-	for (i = 0; i < BE_NUM_VLAN_SUPPORTED; i++) {
-		if (pnob->vlan_tag[i] == vlan_id)
-			break;
-	}
-
-	if (i == BE_NUM_VLAN_SUPPORTED)
-		return;
-	/* Now compact the vlan tag array by removing hole created. */
-	while ((i + 1) < BE_NUM_VLAN_SUPPORTED) {
-		pnob->vlan_tag[i] = pnob->vlan_tag[i + 1];
-		i++;
-	}
-	if ((i + 1) == BE_NUM_VLAN_SUPPORTED)
-		pnob->vlan_tag[i] = (u16) 0x0;
-	pnob->num_vlans--;
-	be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
-			   pnob->vlan_tag, NULL, NULL, NULL);
-}
-
-/*
- * This function is called to program multicast
- * address in the multicast filter of the ASIC.
- */
-static void be_set_multicast_filter(struct net_device *netdev)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct dev_mc_list *mc_ptr;
-	u8 mac_addr[32][ETH_ALEN];
-	int i;
-
-	if (netdev->flags & IFF_ALLMULTI) {
-		/* set BE in Multicast promiscuous */
-		be_rxf_multicast_config(&pnob->fn_obj, true, 0, NULL, NULL,
-					NULL, NULL);
-		return;
-	}
-
-	for (mc_ptr = netdev->mc_list, i = 0; mc_ptr;
-	     mc_ptr = mc_ptr->next, i++) {
-		memcpy(&mac_addr[i][0], mc_ptr->dmi_addr, ETH_ALEN);
-	}
-
-	/* reset the promiscuous mode also. */
-	be_rxf_multicast_config(&pnob->fn_obj, false, i,
-				&mac_addr[0][0], NULL, NULL, NULL);
-}
-
-/*
- * This is the driver entry point to set multicast list
- * with the device netdev. This function will be used to
- * set promiscuous mode or multicast promiscuous mode
- * or multicast mode....
- */
-static void benet_set_multicast_list(struct net_device *netdev)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-
-	if (netdev->flags & IFF_PROMISC) {
-		be_rxf_promiscuous(&pnob->fn_obj, 1, 1, NULL, NULL, NULL);
-	} else {
-		be_rxf_promiscuous(&pnob->fn_obj, 0, 0, NULL, NULL, NULL);
-		be_set_multicast_filter(netdev);
-	}
-}
-
-int benet_init(struct net_device *netdev)
-{
-	struct be_net_object *pnob = netdev_priv(netdev);
-	struct be_adapter *adapter = pnob->adapter;
-
-	ether_setup(netdev);
-
-	netdev->open = &benet_open;
-	netdev->stop = &benet_close;
-	netdev->hard_start_xmit = &benet_xmit;
-
-	netdev->get_stats = &benet_get_stats;
-
-	netdev->set_multicast_list = &benet_set_multicast_list;
-
-	netdev->change_mtu = &benet_change_mtu;
-	netdev->set_mac_address = &benet_set_mac_addr;
-
-	netdev->vlan_rx_register = benet_vlan_register;
-	netdev->vlan_rx_add_vid = benet_vlan_add_vid;
-	netdev->vlan_rx_kill_vid = benet_vlan_rem_vid;
-
-	netdev->features =
-	    NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
-	    NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM;
-
-	netdev->flags |= IFF_MULTICAST;
-
-	/* If device is DAC Capable, set the HIGHDMA flag for netdevice. */
-	if (adapter->dma_64bit_cap)
-		netdev->features |= NETIF_F_HIGHDMA;
-
-	SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
-	return 0;
-}
diff --git a/drivers/staging/benet/benet.h b/drivers/staging/benet/benet.h
deleted file mode 100644
index 09a1f081772..00000000000
--- a/drivers/staging/benet/benet.h
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#ifndef _BENET_H_
-#define _BENET_H_
-
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/inet_lro.h>
-#include "hwlib.h"
-
-#define _SA_MODULE_NAME "net-driver"
-
-#define VLAN_VALID_BIT		0x8000
-#define BE_NUM_VLAN_SUPPORTED	32
-#define BE_PORT_LINK_DOWN       0000
-#define BE_PORT_LINK_UP         0001
-#define	BE_MAX_TX_FRAG_COUNT		(30)
-
-/* Flag bits for send operation */
-#define IPCS            (1 << 0)	/* Enable IP checksum offload */
-#define UDPCS           (1 << 1)	/* Enable UDP checksum offload */
-#define TCPCS           (1 << 2)	/* Enable TCP checksum offload */
-#define LSO             (1 << 3)	/* Enable Large Segment  offload */
-#define ETHVLAN         (1 << 4)	/* Enable VLAN insert */
-#define ETHEVENT        (1 << 5)	/* Generate  event on completion */
-#define ETHCOMPLETE     (1 << 6)	/* Generate completion when done */
-#define IPSEC           (1 << 7)	/* Enable IPSEC */
-#define FORWARD         (1 << 8)	/* Send the packet in forwarding path */
-#define FIN             (1 << 9)	/* Issue FIN segment */
-
-#define BE_MAX_MTU	8974
-
-#define BE_MAX_LRO_DESCRIPTORS			8
-#define BE_LRO_MAX_PKTS				64
-#define BE_MAX_FRAGS_PER_FRAME			6
-
-extern const char be_drvr_ver[];
-extern char be_fw_ver[];
-extern char be_driver_name[];
-
-extern struct ethtool_ops be_ethtool_ops;
-
-#define BE_DEV_STATE_NONE 0
-#define BE_DEV_STATE_INIT 1
-#define BE_DEV_STATE_OPEN 2
-#define BE_DEV_STATE_SUSPEND 3
-
-/* This structure is used to describe physical fragments to use
- * for DMAing data from NIC.
- */
-struct be_recv_buffer {
-	struct list_head rxb_list;	/* for maintaining a linked list */
-	void *rxb_va;		/* buffer virtual address */
-	u32 rxb_pa_lo;		/* low part of physical address */
-	u32 rxb_pa_hi;		/* high part of physical address */
-	u32 rxb_len;		/* length of recv buffer */
-	void *rxb_ctxt;		/* context for OSM driver to use */
-};
-
-/*
- * fragment list to describe scattered data.
- */
-struct be_tx_frag_list {
-	u32 txb_len;		/* Size of this fragment */
-	u32 txb_pa_lo;		/* Lower 32 bits of 64 bit physical addr */
-	u32 txb_pa_hi;		/* Higher 32 bits of 64 bit physical addr */
-};
-
-struct be_rx_page_info {
-	struct page *page;
-	dma_addr_t bus;
-	u16 page_offset;
-};
-
-/*
- *  This structure is the main tracking structure for a NIC interface.
- */
-struct be_net_object {
-	/* MCC Ring - used to send fwcmds to embedded ARM processor */
-	struct MCC_WRB_AMAP *mcc_q;	/* VA of the start of the ring */
-	u32 mcc_q_len;			/* # of WRB entries in this ring */
-	u32 mcc_q_size;
-	u32 mcc_q_hd;			/* MCC ring head */
-	u8 mcc_q_created;		/* flag to help cleanup */
-	struct be_mcc_object mcc_q_obj;	/* BECLIB's MCC ring Object */
-	dma_addr_t mcc_q_bus;		/* DMA'ble bus address */
-
-	/* MCC Completion Ring - FW responses to fwcmds sent from MCC ring */
-	struct MCC_CQ_ENTRY_AMAP *mcc_cq; /* VA of the start of the ring */
-	u32 mcc_cq_len;			/* # of compl. entries in this ring */
-	u32 mcc_cq_size;
-	u32 mcc_cq_tl;			/* compl. ring tail */
-	u8 mcc_cq_created;		/* flag to help cleanup */
-	struct be_cq_object mcc_cq_obj;	/* BECLIB's MCC compl. ring object */
-	u32 mcc_cq_id;			/* MCC ring ID */
-	dma_addr_t mcc_cq_bus;		/* DMA'ble bus address */
-
-	struct ring_desc mb_rd;		/* RD for MCC_MAIL_BOX */
-	void *mb_ptr;			/* mailbox ptr to be freed  */
-	dma_addr_t mb_bus;		/* DMA'ble bus address */
-	u32 mb_size;
-
-	/* BEClib uses an array of context objects to track outstanding
-	 * requests to the MCC.  We need allocate the same number of
-	 * conext entries as the number of entries in the MCC WRB ring
-	 */
-	u32 mcc_wrb_ctxt_size;
-	void *mcc_wrb_ctxt;		/* pointer to the context area */
-	u32 mcc_wrb_ctxtLen;		/* Number of entries in the context */
-	/*
-	 * NIC send request ring - used for xmitting raw ether frames.
-	 */
-	struct ETH_WRB_AMAP *tx_q;	/* VA of the start of the ring */
-	u32 tx_q_len;			/* # if entries in the send ring */
-	u32 tx_q_size;
-	u32 tx_q_hd;			/* Head index. Next req. goes here */
-	u32 tx_q_tl;			/* Tail indx. oldest outstanding req. */
-	u8 tx_q_created;		/* flag to help cleanup */
-	struct be_ethsq_object tx_q_obj;/* BECLIB's send Q handle */
-	dma_addr_t tx_q_bus;		/* DMA'ble bus address */
-	u32 tx_q_id;			/* send queue ring ID */
-	u32 tx_q_port;			/* 0 no binding, 1 port A,  2 port B */
-	atomic_t tx_q_used;		/* # of WRBs used */
-	/* ptr to an array in which we store context info for each send req. */
-	void **tx_ctxt;
-	/*
-	 * NIC Send compl. ring - completion status for all NIC frames xmitted.
-	 */
-	struct ETH_TX_COMPL_AMAP *tx_cq;/* VA of start of the ring */
-	u32 txcq_len;			/* # of entries in the ring */
-	u32 tx_cq_size;
-	/*
-	 * index into compl ring where the host expects next completion entry
-	 */
-	u32 tx_cq_tl;
-	u32 tx_cq_id;			/* completion queue id */
-	u8 tx_cq_created;		/* flag to help cleanup */
-	struct be_cq_object tx_cq_obj;
-	dma_addr_t tx_cq_bus;		/* DMA'ble bus address */
-	/*
-	 * Event Queue - all completion entries post events here.
-	 */
-	struct EQ_ENTRY_AMAP *event_q;	/* VA of start of event queue */
-	u32 event_q_len;		/* # of entries */
-	u32 event_q_size;
-	u32 event_q_tl;			/* Tail of the event queue */
-	u32 event_q_id;			/* Event queue ID */
-	u8 event_q_created;		/* flag to help cleanup */
-	struct be_eq_object event_q_obj; /* Queue handle */
-	dma_addr_t event_q_bus;		/* DMA'ble bus address */
-	/*
-	 * NIC receive queue - Data buffers to be used for receiving unicast,
-	 * broadcast and multi-cast frames  are posted here.
-	 */
-	struct ETH_RX_D_AMAP *rx_q;	/* VA of start of the queue */
-	u32 rx_q_len;			/* # of entries */
-	u32 rx_q_size;
-	u32 rx_q_hd;			/* Head of the queue */
-	atomic_t rx_q_posted;		/* number of posted buffers */
-	u32 rx_q_id;			/* queue ID */
-	u8 rx_q_created;		/* flag to help cleanup */
-	struct be_ethrq_object rx_q_obj;	/* NIC RX queue handle */
-	dma_addr_t rx_q_bus;		/* DMA'ble bus address */
-	/*
-	 * Pointer to an array of opaque context object for use by OSM driver
-	 */
-	void **rx_ctxt;
-	/*
-	 * NIC unicast RX completion queue - all unicast ether frame completion
-	 * statuses from BE come here.
-	 */
-	struct ETH_RX_COMPL_AMAP *rx_cq;	/* VA of start of the queue */
-	u32 rx_cq_len;		/* # of entries */
-	u32 rx_cq_size;
-	u32 rx_cq_tl;			/* Tail of the queue */
-	u32 rx_cq_id;			/* queue ID */
-	u8 rx_cq_created;		/* flag to help cleanup */
-	struct be_cq_object rx_cq_obj;	/* queue handle */
-	dma_addr_t rx_cq_bus;		/* DMA'ble bus address */
-	struct be_function_object fn_obj;	/* function object   */
-	bool	fn_obj_created;
-	u32 rx_buf_size;		/* Size of the RX buffers */
-
-	struct net_device *netdev;
-	struct be_recv_buffer eth_rx_bufs[256];	/* to pass Rx buffer
-							   addresses */
-	struct be_adapter *adapter;	/* Pointer to OSM adapter */
-	u32 devno;		/* OSM, network dev no. */
-	u32 use_port;		/* Current active port */
-	struct be_rx_page_info *rx_page_info;	/* Array of Rx buf pages */
-	u32 rx_pg_info_hd;	/* Head of queue */
-	int rxbuf_post_fail;	/* RxBuff posting fail count */
-	bool rx_pg_shared;	/* Is an allocsted page shared as two frags ? */
-	struct vlan_group *vlan_grp;
-	u32 num_vlans;		/* Number of vlans in BE's filter */
-	u16 vlan_tag[BE_NUM_VLAN_SUPPORTED]; /* vlans currently configured */
-	struct napi_struct napi;
-	struct net_lro_mgr lro_mgr;
-	struct net_lro_desc lro_desc[BE_MAX_LRO_DESCRIPTORS];
-};
-
-#define NET_FH(np)       (&(np)->fn_obj)
-
-/*
- * BE driver statistics.
- */
-struct be_drvr_stat {
-	u32 bes_tx_reqs;	/* number of TX requests initiated */
-	u32 bes_tx_fails;	/* number of TX requests that failed */
-	u32 bes_fwd_reqs;	/* number of send reqs through forwarding i/f */
-	u32 bes_tx_wrbs;	/* number of tx WRBs used */
-
-	u32 bes_ints;		/* number of interrupts */
-	u32 bes_polls;		/* number of times NAPI called poll function */
-	u32 bes_events;		/* total evet entries processed */
-	u32 bes_tx_events;	/* number of tx completion events  */
-	u32 bes_rx_events;	/* number of ucast rx completion events  */
-	u32 bes_tx_compl;	/* number of tx completion entries processed */
-	u32 bes_rx_compl;	/* number of rx completion entries
-				   processed */
-	u32 bes_ethrx_post_fail;	/* number of ethrx buffer alloc
-					   failures */
-	/*
-	 * number of non ether type II frames dropped where
-	 * frame len > length field of Mac Hdr
-	 */
-	u32 bes_802_3_dropped_frames;
-	/*
-	 * number of non ether type II frames malformed where
-	 * in frame len < length field of Mac Hdr
-	 */
-	u32 bes_802_3_malformed_frames;
-	u32 bes_ips;		/*  interrupts / sec */
-	u32 bes_prev_ints;	/* bes_ints at last IPS calculation  */
-	u16 bes_eth_tx_rate;	/*  ETH TX rate - Mb/sec */
-	u16 bes_eth_rx_rate;	/*  ETH RX rate - Mb/sec */
-	u32 bes_rx_coal;	/* Num pkts coalasced */
-	u32 bes_rx_flush;	/* Num times coalasced */
-	u32 bes_link_change_physical;	/*Num of times physical link changed */
-	u32 bes_link_change_virtual;	/*Num of times virtual link changed */
-	u32 bes_rx_misc_pkts;	/* Misc pkts received */
-};
-
-/* Maximum interrupt delay (in microseconds) allowed */
-#define MAX_EQD				120
-
-/*
- * timer to prevent system shutdown hang for ever if h/w stops responding
- */
-struct be_timer_ctxt {
-	atomic_t get_stat_flag;
-	struct timer_list get_stats_timer;
-	unsigned long get_stat_sem_addr;
-} ;
-
-/* This structure is the main BladeEngine driver context.  */
-struct be_adapter {
-	struct net_device *netdevp;
-	struct be_drvr_stat be_stat;
-	struct net_device_stats benet_stats;
-
-	/* PCI BAR mapped addresses */
-	u8 __iomem *csr_va;	/* CSR */
-	u8 __iomem *db_va;	/* Door  Bell  */
-	u8 __iomem *pci_va;	/* PCI Config */
-
-	struct tasklet_struct sts_handler;
-	struct timer_list cq_timer;
-	spinlock_t int_lock;	/* to protect the isr field in adapter */
-
-	struct FWCMD_ETH_GET_STATISTICS *eth_statsp;
-	/*
-	 * This will enable the use of ethtool to enable or disable
-	 * Checksum on Rx pkts to be obeyed or disobeyed.
-	 * If this is true = 1, then whatever is the checksum on the
-	 * Received pkt as per BE, it will be given to the stack.
-	 * Else the stack will re calculate it.
-	 */
-	bool rx_csum;
-	/*
-	 * This will enable the use of ethtool to enable or disable
-	 * Coalese on Rx pkts to be obeyed or disobeyed.
-	 * If this is grater than 0 and less than 16 then coalascing
-	 * is enabled else it is disabled
-	 */
-	u32 max_rx_coal;
-	struct pci_dev *pdev;	/* Pointer to OS's PCI dvice */
-
-	spinlock_t txq_lock;	/* to stop/wake queue based on tx_q_used */
-
-	u32 isr;		/* copy of Intr status reg. */
-
-	u32 port0_link_sts;	/* Port 0 link status */
-	u32 port1_link_sts;	/* port 1 list status */
-	struct BE_LINK_STATUS *be_link_sts;
-
-	/* pointer to the first netobject of this adapter */
-	struct be_net_object *net_obj;
-
-	/*  Flags to indicate what to clean up */
-	bool tasklet_started;
-	bool isr_registered;
-	/*
-	 * adaptive interrupt coalescing (AIC) related
-	 */
-	bool enable_aic;	/* 1 if AIC is enabled */
-	u16 min_eqd;		/* minimum EQ delay in usec */
-	u16 max_eqd;		/* minimum EQ delay in usec */
-	u16 cur_eqd;		/* current EQ delay in usec */
-	/*
-	 * book keeping for interrupt / sec and TX/RX rate calculation
-	 */
-	ulong ips_jiffies;	/* jiffies at last IPS calc */
-	u32 eth_tx_bytes;
-	ulong eth_tx_jiffies;
-	u32 eth_rx_bytes;
-	ulong eth_rx_jiffies;
-
-	struct semaphore get_eth_stat_sem;
-
-	/* timer ctxt to prevent shutdown hanging due to un-responsive BE */
-	struct be_timer_ctxt timer_ctxt;
-
-#define BE_MAX_MSIX_VECTORS             32
-#define BE_MAX_REQ_MSIX_VECTORS         1 /* only one EQ in Linux driver */
-	struct msix_entry msix_entries[BE_MAX_MSIX_VECTORS];
-	bool msix_enabled;
-	bool dma_64bit_cap;	/* the Device DAC capable  or not */
-	u8 dev_state;	/* The current state of the device */
-	u8 dev_pm_state; /* The State of device before going to suspend */
-};
-
-/*
- * Every second we look at the ints/sec and adjust eq_delay
- * between adapter->min_eqd and adapter->max_eqd to keep the ints/sec between
- * IPS_HI_WM and IPS_LO_WM.
- */
-#define IPS_HI_WM	18000
-#define IPS_LO_WM	8000
-
-
-static inline void index_adv(u32 *index, u32 val,  u32 limit)
-{
-	BUG_ON(limit & (limit-1));
-	*index = (*index + val) & (limit - 1);
-}
-
-static inline void index_inc(u32 *index, u32 limit)
-{
-	BUG_ON(limit & (limit-1));
-	*index = (*index + 1) & (limit - 1);
-}
-
-static inline void be_adv_eq_tl(struct be_net_object *pnob)
-{
-	index_inc(&pnob->event_q_tl, pnob->event_q_len);
-}
-
-static inline void be_adv_txq_hd(struct be_net_object *pnob)
-{
-	index_inc(&pnob->tx_q_hd, pnob->tx_q_len);
-}
-
-static inline void be_adv_txq_tl(struct be_net_object *pnob)
-{
-	index_inc(&pnob->tx_q_tl, pnob->tx_q_len);
-}
-
-static inline void be_adv_txcq_tl(struct be_net_object *pnob)
-{
-	index_inc(&pnob->tx_cq_tl, pnob->txcq_len);
-}
-
-static inline void be_adv_rxq_hd(struct be_net_object *pnob)
-{
-	index_inc(&pnob->rx_q_hd, pnob->rx_q_len);
-}
-
-static inline void be_adv_rxcq_tl(struct be_net_object *pnob)
-{
-	index_inc(&pnob->rx_cq_tl, pnob->rx_cq_len);
-}
-
-static inline u32 tx_compl_lastwrb_idx_get(struct be_net_object *pnob)
-{
-	return (pnob->tx_q_tl + *(u32 *)&pnob->tx_ctxt[pnob->tx_q_tl] - 1)
-		    & (pnob->tx_q_len - 1);
-}
-
-int benet_init(struct net_device *);
-int be_ethtool_ioctl(struct net_device *, struct ifreq *);
-struct net_device_stats *benet_get_stats(struct net_device *);
-void be_process_intr(unsigned long context);
-irqreturn_t be_int(int irq, void *dev);
-void be_post_eth_rx_buffs(struct be_net_object *);
-void be_get_stat_cb(void *, int, struct MCC_WRB_AMAP *);
-void be_get_stats_timer_handler(unsigned long);
-void be_wait_nic_tx_cmplx_cmpl(struct be_net_object *);
-void be_print_link_info(struct BE_LINK_STATUS *);
-void be_update_link_status(struct be_adapter *);
-void be_init_procfs(struct be_adapter *);
-void be_cleanup_procfs(struct be_adapter *);
-int be_poll(struct napi_struct *, int);
-struct ETH_RX_COMPL_AMAP *be_get_rx_cmpl(struct be_net_object *);
-void be_notify_cmpl(struct be_net_object *, int, int, int);
-void be_enable_intr(struct be_net_object *);
-void be_enable_eq_intr(struct be_net_object *);
-void be_disable_intr(struct be_net_object *);
-void be_disable_eq_intr(struct be_net_object *);
-int be_set_uc_mac_adr(struct be_net_object *, u8, u8, u8,
-		    u8 *, mcc_wrb_cqe_callback, void *);
-int be_get_flow_ctl(struct be_function_object *pFnObj, bool *, bool *);
-void process_one_tx_compl(struct be_net_object *pnob, u32 end_idx);
-
-#endif /* _BENET_H_ */
diff --git a/drivers/staging/benet/bestatus.h b/drivers/staging/benet/bestatus.h
deleted file mode 100644
index 59c7a4b6222..00000000000
--- a/drivers/staging/benet/bestatus.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#ifndef _BESTATUS_H_
-#define _BESTATUS_H_
-
-#define BE_SUCCESS                      (0x00000000L)
-/*
- * MessageId: BE_PENDING
- *  The BladeEngine Driver call succeeded, and pended operation.
- */
-#define BE_PENDING                       (0x20070001L)
-#define BE_STATUS_PENDING                (BE_PENDING)
-/*
- * MessageId: BE_NOT_OK
- *  An error occurred.
- */
-#define BE_NOT_OK                        (0xE0070002L)
-/*
- * MessageId: BE_STATUS_SYSTEM_RESOURCES
- *  Insufficient host system resources exist to complete the API.
- */
-#define BE_STATUS_SYSTEM_RESOURCES       (0xE0070003L)
-/*
- * MessageId: BE_STATUS_CHIP_RESOURCES
- *  Insufficient chip resources exist to complete the API.
- */
-#define BE_STATUS_CHIP_RESOURCES         (0xE0070004L)
-/*
- * MessageId: BE_STATUS_NO_RESOURCE
- *  Insufficient resources to complete request.
- */
-#define BE_STATUS_NO_RESOURCE            (0xE0070005L)
-/*
- * MessageId: BE_STATUS_BUSY
- *  Resource is currently busy.
- */
-#define BE_STATUS_BUSY                   (0xE0070006L)
-/*
- * MessageId: BE_STATUS_INVALID_PARAMETER
- *  Invalid Parameter in request.
- */
-#define BE_STATUS_INVALID_PARAMETER      (0xE0000007L)
-/*
- * MessageId: BE_STATUS_NOT_SUPPORTED
- *  Requested operation is not supported.
- */
-#define BE_STATUS_NOT_SUPPORTED          (0xE000000DL)
-
-/*
- * ***************************************************************************
- *                     E T H E R N E T   S T A T U S
- * ***************************************************************************
- */
-
-/*
- * MessageId: BE_ETH_TX_ERROR
- *  The Ethernet device driver failed to transmit a packet.
- */
-#define BE_ETH_TX_ERROR                  (0xE0070101L)
-
-/*
- * ***************************************************************************
- *                     S H A R E D   S T A T U S
- * ***************************************************************************
- */
-
-/*
- * MessageId: BE_STATUS_VBD_INVALID_VERSION
- *  The device driver is not compatible with this version of the VBD.
- */
-#define BE_STATUS_INVALID_VERSION    (0xE0070402L)
-/*
- * MessageId: BE_STATUS_DOMAIN_DENIED
- *  The operation failed to complete due to insufficient access
- *  rights for the requesting domain.
- */
-#define BE_STATUS_DOMAIN_DENIED          (0xE0070403L)
-/*
- * MessageId: BE_STATUS_TCP_NOT_STARTED
- *  The embedded TCP/IP stack has not been started.
- */
-#define BE_STATUS_TCP_NOT_STARTED        (0xE0070409L)
-/*
- * MessageId: BE_STATUS_NO_MCC_WRB
- *  No free MCC WRB are available for posting the request.
- */
-#define BE_STATUS_NO_MCC_WRB                 (0xE0070414L)
-
-#endif /* _BESTATUS_ */
diff --git a/drivers/staging/benet/cev.h b/drivers/staging/benet/cev.h
deleted file mode 100644
index 30996920a54..00000000000
--- a/drivers/staging/benet/cev.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __cev_amap_h__
-#define __cev_amap_h__
-#include "ep.h"
-
-/*
- * Host Interrupt Status Register 0. The first of four application
- * interrupt status registers. This register contains the interrupts
- * for Event Queues EQ0 through EQ31.
- */
-struct BE_CEV_ISR0_CSR_AMAP {
-	u8 interrupt0;	/* DWORD 0 */
-	u8 interrupt1;	/* DWORD 0 */
-	u8 interrupt2;	/* DWORD 0 */
-	u8 interrupt3;	/* DWORD 0 */
-	u8 interrupt4;	/* DWORD 0 */
-	u8 interrupt5;	/* DWORD 0 */
-	u8 interrupt6;	/* DWORD 0 */
-	u8 interrupt7;	/* DWORD 0 */
-	u8 interrupt8;	/* DWORD 0 */
-	u8 interrupt9;	/* DWORD 0 */
-	u8 interrupt10;	/* DWORD 0 */
-	u8 interrupt11;	/* DWORD 0 */
-	u8 interrupt12;	/* DWORD 0 */
-	u8 interrupt13;	/* DWORD 0 */
-	u8 interrupt14;	/* DWORD 0 */
-	u8 interrupt15;	/* DWORD 0 */
-	u8 interrupt16;	/* DWORD 0 */
-	u8 interrupt17;	/* DWORD 0 */
-	u8 interrupt18;	/* DWORD 0 */
-	u8 interrupt19;	/* DWORD 0 */
-	u8 interrupt20;	/* DWORD 0 */
-	u8 interrupt21;	/* DWORD 0 */
-	u8 interrupt22;	/* DWORD 0 */
-	u8 interrupt23;	/* DWORD 0 */
-	u8 interrupt24;	/* DWORD 0 */
-	u8 interrupt25;	/* DWORD 0 */
-	u8 interrupt26;	/* DWORD 0 */
-	u8 interrupt27;	/* DWORD 0 */
-	u8 interrupt28;	/* DWORD 0 */
-	u8 interrupt29;	/* DWORD 0 */
-	u8 interrupt30;	/* DWORD 0 */
-	u8 interrupt31;	/* DWORD 0 */
-} __packed;
-struct CEV_ISR0_CSR_AMAP {
-	u32 dw[1];
-};
-
-/*
- * Host Interrupt Status Register 1. The second of four application
- * interrupt status registers. This register contains the interrupts
- * for Event Queues EQ32 through EQ63.
- */
-struct BE_CEV_ISR1_CSR_AMAP {
-	u8 interrupt32;	/* DWORD 0 */
-	u8 interrupt33;	/* DWORD 0 */
-	u8 interrupt34;	/* DWORD 0 */
-	u8 interrupt35;	/* DWORD 0 */
-	u8 interrupt36;	/* DWORD 0 */
-	u8 interrupt37;	/* DWORD 0 */
-	u8 interrupt38;	/* DWORD 0 */
-	u8 interrupt39;	/* DWORD 0 */
-	u8 interrupt40;	/* DWORD 0 */
-	u8 interrupt41;	/* DWORD 0 */
-	u8 interrupt42;	/* DWORD 0 */
-	u8 interrupt43;	/* DWORD 0 */
-	u8 interrupt44;	/* DWORD 0 */
-	u8 interrupt45;	/* DWORD 0 */
-	u8 interrupt46;	/* DWORD 0 */
-	u8 interrupt47;	/* DWORD 0 */
-	u8 interrupt48;	/* DWORD 0 */
-	u8 interrupt49;	/* DWORD 0 */
-	u8 interrupt50;	/* DWORD 0 */
-	u8 interrupt51;	/* DWORD 0 */
-	u8 interrupt52;	/* DWORD 0 */
-	u8 interrupt53;	/* DWORD 0 */
-	u8 interrupt54;	/* DWORD 0 */
-	u8 interrupt55;	/* DWORD 0 */
-	u8 interrupt56;	/* DWORD 0 */
-	u8 interrupt57;	/* DWORD 0 */
-	u8 interrupt58;	/* DWORD 0 */
-	u8 interrupt59;	/* DWORD 0 */
-	u8 interrupt60;	/* DWORD 0 */
-	u8 interrupt61;	/* DWORD 0 */
-	u8 interrupt62;	/* DWORD 0 */
-	u8 interrupt63;	/* DWORD 0 */
-} __packed;
-struct CEV_ISR1_CSR_AMAP {
-	u32 dw[1];
-};
-/*
- * Host Interrupt Status Register 2. The third of four application
- * interrupt status registers. This register contains the interrupts
- * for Event Queues EQ64 through EQ95.
- */
-struct BE_CEV_ISR2_CSR_AMAP {
-	u8 interrupt64;	/* DWORD 0 */
-	u8 interrupt65;	/* DWORD 0 */
-	u8 interrupt66;	/* DWORD 0 */
-	u8 interrupt67;	/* DWORD 0 */
-	u8 interrupt68;	/* DWORD 0 */
-	u8 interrupt69;	/* DWORD 0 */
-	u8 interrupt70;	/* DWORD 0 */
-	u8 interrupt71;	/* DWORD 0 */
-	u8 interrupt72;	/* DWORD 0 */
-	u8 interrupt73;	/* DWORD 0 */
-	u8 interrupt74;	/* DWORD 0 */
-	u8 interrupt75;	/* DWORD 0 */
-	u8 interrupt76;	/* DWORD 0 */
-	u8 interrupt77;	/* DWORD 0 */
-	u8 interrupt78;	/* DWORD 0 */
-	u8 interrupt79;	/* DWORD 0 */
-	u8 interrupt80;	/* DWORD 0 */
-	u8 interrupt81;	/* DWORD 0 */
-	u8 interrupt82;	/* DWORD 0 */
-	u8 interrupt83;	/* DWORD 0 */
-	u8 interrupt84;	/* DWORD 0 */
-	u8 interrupt85;	/* DWORD 0 */
-	u8 interrupt86;	/* DWORD 0 */
-	u8 interrupt87;	/* DWORD 0 */
-	u8 interrupt88;	/* DWORD 0 */
-	u8 interrupt89;	/* DWORD 0 */
-	u8 interrupt90;	/* DWORD 0 */
-	u8 interrupt91;	/* DWORD 0 */
-	u8 interrupt92;	/* DWORD 0 */
-	u8 interrupt93;	/* DWORD 0 */
-	u8 interrupt94;	/* DWORD 0 */
-	u8 interrupt95;	/* DWORD 0 */
-} __packed;
-struct CEV_ISR2_CSR_AMAP {
-	u32 dw[1];
-};
-
-/*
- * Host Interrupt Status Register 3. The fourth of four application
- * interrupt status registers. This register contains the interrupts
- * for Event Queues EQ96 through EQ127.
- */
-struct BE_CEV_ISR3_CSR_AMAP {
-	u8 interrupt96;	/* DWORD 0 */
-	u8 interrupt97;	/* DWORD 0 */
-	u8 interrupt98;	/* DWORD 0 */
-	u8 interrupt99;	/* DWORD 0 */
-	u8 interrupt100;	/* DWORD 0 */
-	u8 interrupt101;	/* DWORD 0 */
-	u8 interrupt102;	/* DWORD 0 */
-	u8 interrupt103;	/* DWORD 0 */
-	u8 interrupt104;	/* DWORD 0 */
-	u8 interrupt105;	/* DWORD 0 */
-	u8 interrupt106;	/* DWORD 0 */
-	u8 interrupt107;	/* DWORD 0 */
-	u8 interrupt108;	/* DWORD 0 */
-	u8 interrupt109;	/* DWORD 0 */
-	u8 interrupt110;	/* DWORD 0 */
-	u8 interrupt111;	/* DWORD 0 */
-	u8 interrupt112;	/* DWORD 0 */
-	u8 interrupt113;	/* DWORD 0 */
-	u8 interrupt114;	/* DWORD 0 */
-	u8 interrupt115;	/* DWORD 0 */
-	u8 interrupt116;	/* DWORD 0 */
-	u8 interrupt117;	/* DWORD 0 */
-	u8 interrupt118;	/* DWORD 0 */
-	u8 interrupt119;	/* DWORD 0 */
-	u8 interrupt120;	/* DWORD 0 */
-	u8 interrupt121;	/* DWORD 0 */
-	u8 interrupt122;	/* DWORD 0 */
-	u8 interrupt123;	/* DWORD 0 */
-	u8 interrupt124;	/* DWORD 0 */
-	u8 interrupt125;	/* DWORD 0 */
-	u8 interrupt126;	/* DWORD 0 */
-	u8 interrupt127;	/* DWORD 0 */
-} __packed;
-struct CEV_ISR3_CSR_AMAP {
-	u32 dw[1];
-};
-
-/*  Completions and Events block Registers.  */
-struct BE_CEV_CSRMAP_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[32];	/* DWORD 1 */
-	u8 rsvd2[32];	/* DWORD 2 */
-	u8 rsvd3[32];	/* DWORD 3 */
-	struct BE_CEV_ISR0_CSR_AMAP isr0;
-	struct BE_CEV_ISR1_CSR_AMAP isr1;
-	struct BE_CEV_ISR2_CSR_AMAP isr2;
-	struct BE_CEV_ISR3_CSR_AMAP isr3;
-	u8 rsvd4[32];	/* DWORD 8 */
-	u8 rsvd5[32];	/* DWORD 9 */
-	u8 rsvd6[32];	/* DWORD 10 */
-	u8 rsvd7[32];	/* DWORD 11 */
-	u8 rsvd8[32];	/* DWORD 12 */
-	u8 rsvd9[32];	/* DWORD 13 */
-	u8 rsvd10[32];	/* DWORD 14 */
-	u8 rsvd11[32];	/* DWORD 15 */
-	u8 rsvd12[32];	/* DWORD 16 */
-	u8 rsvd13[32];	/* DWORD 17 */
-	u8 rsvd14[32];	/* DWORD 18 */
-	u8 rsvd15[32];	/* DWORD 19 */
-	u8 rsvd16[32];	/* DWORD 20 */
-	u8 rsvd17[32];	/* DWORD 21 */
-	u8 rsvd18[32];	/* DWORD 22 */
-	u8 rsvd19[32];	/* DWORD 23 */
-	u8 rsvd20[32];	/* DWORD 24 */
-	u8 rsvd21[32];	/* DWORD 25 */
-	u8 rsvd22[32];	/* DWORD 26 */
-	u8 rsvd23[32];	/* DWORD 27 */
-	u8 rsvd24[32];	/* DWORD 28 */
-	u8 rsvd25[32];	/* DWORD 29 */
-	u8 rsvd26[32];	/* DWORD 30 */
-	u8 rsvd27[32];	/* DWORD 31 */
-	u8 rsvd28[32];	/* DWORD 32 */
-	u8 rsvd29[32];	/* DWORD 33 */
-	u8 rsvd30[192];	/* DWORD 34 */
-	u8 rsvd31[192];	/* DWORD 40 */
-	u8 rsvd32[160];	/* DWORD 46 */
-	u8 rsvd33[160];	/* DWORD 51 */
-	u8 rsvd34[160];	/* DWORD 56 */
-	u8 rsvd35[96];	/* DWORD 61 */
-	u8 rsvd36[192][32];	/* DWORD 64 */
-} __packed;
-struct CEV_CSRMAP_AMAP {
-	u32 dw[256];
-};
-
-#endif /* __cev_amap_h__ */
diff --git a/drivers/staging/benet/cq.c b/drivers/staging/benet/cq.c
deleted file mode 100644
index 65045864543..00000000000
--- a/drivers/staging/benet/cq.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include "hwlib.h"
-#include "bestatus.h"
-
-/*
- * Completion Queue Objects
- */
-/*
- *============================================================================
- *                  P U B L I C  R O U T I N E S
- *============================================================================
- */
-
-/*
-    This routine creates a completion queue based on the client completion
-    queue configuration information.
-
-
-    FunctionObject      - Handle to a function object
-    CqBaseVa            - Base VA for a the CQ ring
-    NumEntries          - CEV_CQ_CNT_* values
-    solEventEnable      - 0 = All CQEs can generate Events if CQ is eventable
-			1 = only CQEs with solicited bit set are eventable
-    eventable           - Eventable CQ, generates interrupts.
-    nodelay             - 1 = Force interrupt, relevent if CQ eventable.
-			Interrupt is asserted immediately after EQE
-			write is confirmed, regardless of EQ Timer
-			or watermark settings.
-    wme                 - Enable watermark based coalescing
-    wmThresh            - High watermark(CQ fullness at which event
-			or interrupt should be asserted).  These are the
-			CEV_WATERMARK encoded values.
-    EqObject            - EQ Handle to assign to this CQ
-    ppCqObject          - Internal CQ Handle returned.
-
-    Returns BE_SUCCESS if successfull, otherwise a useful error code is
-	returned.
-
-    IRQL < DISPATCH_LEVEL
-
-*/
-int be_cq_create(struct be_function_object *pfob,
-	struct ring_desc *rd, u32 length, bool solicited_eventable,
-	bool no_delay, u32 wm_thresh,
-	struct be_eq_object *eq_object, struct be_cq_object *cq_object)
-{
-	int status = BE_SUCCESS;
-	u32 num_entries_encoding;
-	u32 num_entries = length / sizeof(struct MCC_CQ_ENTRY_AMAP);
-	struct FWCMD_COMMON_CQ_CREATE *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	u32 n;
-	unsigned long irql;
-
-	ASSERT(rd);
-	ASSERT(cq_object);
-	ASSERT(length % sizeof(struct MCC_CQ_ENTRY_AMAP) == 0);
-
-	switch (num_entries) {
-	case 256:
-		num_entries_encoding = CEV_CQ_CNT_256;
-		break;
-	case 512:
-		num_entries_encoding = CEV_CQ_CNT_512;
-		break;
-	case 1024:
-		num_entries_encoding = CEV_CQ_CNT_1024;
-		break;
-	default:
-		ASSERT(0);
-		return BE_STATUS_INVALID_PARAMETER;
-	}
-
-	/*
-	 * All cq entries all the same size.  Use iSCSI version
-	 * as a test for the proper rd length.
-	 */
-	memset(cq_object, 0, sizeof(*cq_object));
-
-	atomic_set(&cq_object->ref_count, 0);
-	cq_object->parent_function = pfob;
-	cq_object->eq_object = eq_object;
-	cq_object->num_entries = num_entries;
-	/* save for MCC cq processing */
-	cq_object->va = rd->va;
-
-	/* map into UT. */
-	length = num_entries * sizeof(struct MCC_CQ_ENTRY_AMAP);
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		ASSERT(wrb);
-		TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto Error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_CQ_CREATE);
-
-	fwcmd->params.request.num_pages = PAGES_SPANNED(OFFSET_IN_PAGE(rd->va),
-									length);
-
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, valid, &fwcmd->params.request.context, 1);
-	n = pfob->pci_function_number;
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, Func, &fwcmd->params.request.context, n);
-
-	n = (eq_object != NULL);
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, Eventable,
-				&fwcmd->params.request.context, n);
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, Armed, &fwcmd->params.request.context, 1);
-
-	n = eq_object ? eq_object->eq_id : 0;
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, EQID, &fwcmd->params.request.context, n);
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, Count,
-			&fwcmd->params.request.context, num_entries_encoding);
-
-	n = 0; /* Protection Domain is always 0 in  Linux  driver */
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, PD, &fwcmd->params.request.context, n);
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, NoDelay,
-				&fwcmd->params.request.context, no_delay);
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, SolEvent,
-			&fwcmd->params.request.context, solicited_eventable);
-
-	n = (wm_thresh != 0xFFFFFFFF);
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, WME, &fwcmd->params.request.context, n);
-
-	n = (n ? wm_thresh : 0);
-	AMAP_SET_BITS_PTR(CQ_CONTEXT, Watermark,
-				&fwcmd->params.request.context, n);
-	/* Create a page list for the FWCMD. */
-	be_rd_to_pa_list(rd, fwcmd->params.request.pages,
-			  ARRAY_SIZE(fwcmd->params.request.pages));
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-			NULL, NULL, fwcmd, NULL);
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "MCC to create CQ failed.");
-		goto Error;
-	}
-	/* Remember the CQ id. */
-	cq_object->cq_id = fwcmd->params.response.cq_id;
-
-	/* insert this cq into eq_object reference */
-	if (eq_object) {
-		atomic_inc(&eq_object->ref_count);
-		list_add_tail(&cq_object->cqlist_for_eq,
-					&eq_object->cq_list_head);
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-
-    Deferences the given object. Once the object's reference count drops to
-    zero, the object is destroyed and all resources that are held by this object
-    are released.  The on-chip context is also destroyed along with the queue
-    ID, and any mappings made into the UT.
-
-    cq_object            - CQ handle returned from cq_object_create.
-
-    returns the current reference count on the object
-
-    IRQL: IRQL < DISPATCH_LEVEL
-*/
-int be_cq_destroy(struct be_cq_object *cq_object)
-{
-	int status = 0;
-
-	/* Nothing should reference this CQ at this point. */
-	ASSERT(atomic_read(&cq_object->ref_count) == 0);
-
-	/* Send fwcmd to destroy the CQ. */
-	status = be_function_ring_destroy(cq_object->parent_function,
-		     cq_object->cq_id, FWCMD_RING_TYPE_CQ,
-					NULL, NULL, NULL, NULL);
-	ASSERT(status == 0);
-
-	/* Remove reference if this is an eventable CQ. */
-	if (cq_object->eq_object) {
-		atomic_dec(&cq_object->eq_object->ref_count);
-		list_del(&cq_object->cqlist_for_eq);
-	}
-	return BE_SUCCESS;
-}
-
diff --git a/drivers/staging/benet/descriptors.h b/drivers/staging/benet/descriptors.h
deleted file mode 100644
index 8da438c407d..00000000000
--- a/drivers/staging/benet/descriptors.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __descriptors_amap_h__
-#define __descriptors_amap_h__
-
-/*
- * --- IPC_NODE_ID_ENUM ---
- * IPC processor id values
- */
-#define TPOST_NODE_ID                   (0)	/* TPOST ID */
-#define TPRE_NODE_ID                    (1)	/* TPRE ID */
-#define TXULP0_NODE_ID                  (2)	/* TXULP0 ID */
-#define TXULP1_NODE_ID                  (3)	/* TXULP1 ID */
-#define TXULP2_NODE_ID                  (4)	/* TXULP2 ID */
-#define RXULP0_NODE_ID                  (5)	/* RXULP0 ID */
-#define RXULP1_NODE_ID                  (6)	/* RXULP1 ID */
-#define RXULP2_NODE_ID                  (7)	/* RXULP2 ID */
-#define MPU_NODE_ID                     (15)	/* MPU ID */
-
-/*
- * --- MAC_ID_ENUM ---
- * Meaning of the mac_id field in rxpp_eth_d
- */
-#define PORT0_HOST_MAC0    (0)  /* PD 0, Port 0, host networking, MAC 0. */
-#define PORT0_HOST_MAC1    (1)	/* PD 0, Port 0, host networking, MAC 1. */
-#define PORT0_STORAGE_MAC0 (2)	/* PD 0, Port 0, host storage, MAC 0. */
-#define PORT0_STORAGE_MAC1 (3)	/* PD 0, Port 0, host storage, MAC 1. */
-#define PORT1_HOST_MAC0    (4)	/* PD 0, Port 1 host networking, MAC 0. */
-#define PORT1_HOST_MAC1    (5)	/* PD 0, Port 1 host networking, MAC 1. */
-#define PORT1_STORAGE_MAC0 (6)	/* PD 0, Port 1 host storage, MAC 0. */
-#define PORT1_STORAGE_MAC1 (7)	/* PD 0, Port 1 host storage, MAC 1. */
-#define FIRST_VM_MAC       (8)	/* PD 1 MAC. Protection domains have IDs */
-				/* from 0x8-0x26, one per PD. */
-#define LAST_VM_MAC        (38)	/* PD 31 MAC. */
-#define MGMT_MAC           (39)	/* Management port MAC. */
-#define MARBLE_MAC0        (59)	/* Used for flushing function 0 receive */
-				  /*
-				   * queues before re-using a torn-down
-				   * receive ring. the DA =
-				   * 00-00-00-00-00-00, and the MSB of the
-				   * SA = 00
-				   */
-#define MARBLE_MAC1        (60)	/* Used for flushing function 1 receive */
-				  /*
-				   * queues before re-using a torn-down
-				   * receive ring. the DA =
-				   * 00-00-00-00-00-00, and the MSB of the
-				   * SA != 00
-				   */
-#define NULL_MAC           (61)	/* Promiscuous mode, indicates no match */
-#define MCAST_MAC          (62)	/* Multicast match. */
-#define BCAST_MATCH        (63)	/* Broadcast match. */
-
-#endif /* __descriptors_amap_h__ */
diff --git a/drivers/staging/benet/doorbells.h b/drivers/staging/benet/doorbells.h
deleted file mode 100644
index 550cc4d5d6f..00000000000
--- a/drivers/staging/benet/doorbells.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __doorbells_amap_h__
-#define __doorbells_amap_h__
-
-/* The TX/RDMA send queue doorbell. */
-struct BE_SQ_DB_AMAP {
-	u8 cid[11];		/* DWORD 0 */
-	u8 rsvd0[5];	/* DWORD 0 */
-	u8 numPosted[14];	/* DWORD 0 */
-	u8 rsvd1[2];	/* DWORD 0 */
-} __packed;
-struct SQ_DB_AMAP {
-	u32 dw[1];
-};
-
-/* The receive queue doorbell. */
-struct BE_RQ_DB_AMAP {
-	u8 rq[10];		/* DWORD 0 */
-	u8 rsvd0[13];	/* DWORD 0 */
-	u8 Invalidate;	/* DWORD 0 */
-	u8 numPosted[8];	/* DWORD 0 */
-} __packed;
-struct RQ_DB_AMAP {
-	u32 dw[1];
-};
-
-/*
- * The CQ/EQ doorbell. Software MUST set reserved fields in this
- * descriptor to zero, otherwise (CEV) hardware will not execute the
- * doorbell (flagging a bad_db_qid error instead).
- */
-struct BE_CQ_DB_AMAP {
-	u8 qid[10];		/* DWORD 0 */
-	u8 rsvd0[4];	/* DWORD 0 */
-	u8 rearm;		/* DWORD 0 */
-	u8 event;		/* DWORD 0 */
-	u8 num_popped[13];	/* DWORD 0 */
-	u8 rsvd1[3];	/* DWORD 0 */
-} __packed;
-struct CQ_DB_AMAP {
-	u32 dw[1];
-};
-
-struct BE_TPM_RQ_DB_AMAP {
-	u8 qid[10];		/* DWORD 0 */
-	u8 rsvd0[6];	/* DWORD 0 */
-	u8 numPosted[11];	/* DWORD 0 */
-	u8 mss_cnt[5];	/* DWORD 0 */
-} __packed;
-struct TPM_RQ_DB_AMAP {
-	u32 dw[1];
-};
-
-/*
- * Post WRB Queue Doorbell Register used by the host Storage stack
- * to notify the controller of a posted Work Request Block
- */
-struct BE_WRB_POST_DB_AMAP {
-	u8 wrb_cid[10];	/* DWORD 0 */
-	u8 rsvd0[6];	/* DWORD 0 */
-	u8 wrb_index[8];	/* DWORD 0 */
-	u8 numberPosted[8];	/* DWORD 0 */
-} __packed;
-struct WRB_POST_DB_AMAP {
-	u32 dw[1];
-};
-
-/*
- * Update Default PDU Queue Doorbell Register used to communicate
- * to the controller that the driver has stopped processing the queue
- * and where in the queue it stopped, this is
- * a CQ Entry Type. Used by storage driver.
- */
-struct BE_DEFAULT_PDU_DB_AMAP {
-	u8 qid[10];		/* DWORD 0 */
-	u8 rsvd0[4];	/* DWORD 0 */
-	u8 rearm;		/* DWORD 0 */
-	u8 event;		/* DWORD 0 */
-	u8 cqproc[14];	/* DWORD 0 */
-	u8 rsvd1[2];	/* DWORD 0 */
-} __packed;
-struct DEFAULT_PDU_DB_AMAP {
-	u32 dw[1];
-};
-
-/* Management Command and Controller default fragment ring */
-struct BE_MCC_DB_AMAP {
-	u8 rid[11];		/* DWORD 0 */
-	u8 rsvd0[5];	/* DWORD 0 */
-	u8 numPosted[14];	/* DWORD 0 */
-	u8 rsvd1[2];	/* DWORD 0 */
-} __packed;
-struct MCC_DB_AMAP {
-	u32 dw[1];
-};
-
-/*
- * Used for bootstrapping the Host interface. This register is
- * used for driver communication with the MPU when no MCC Rings exist.
- * The software must write this register twice to post any MCC
- * command. First, it writes the register with hi=1 and the upper bits of
- * the  physical address for the MCC_MAILBOX structure.  Software must poll
- * the ready bit until this is acknowledged.  Then, sotware writes the
- * register with hi=0 with the lower bits in the address.  It must
- * poll the ready bit until the MCC command is complete.  Upon completion,
- * the MCC_MAILBOX will contain a valid completion queue  entry.
- */
-struct BE_MPU_MAILBOX_DB_AMAP {
-	u8 ready;		/* DWORD 0 */
-	u8 hi;		/* DWORD 0 */
-	u8 address[30];	/* DWORD 0 */
-} __packed;
-struct MPU_MAILBOX_DB_AMAP {
-	u32 dw[1];
-};
-
-/*
- *  This is the protection domain doorbell register map. Note that
- *  while this map shows doorbells for all Blade Engine supported
- *  protocols, not all of these may be valid in a given function or
- *  protection domain. It is the responsibility of the application
- *  accessing the doorbells to know which are valid. Each doorbell
- *  occupies 32 bytes of space, but unless otherwise specified,
- *  only the first 4 bytes should be written.  There are 32 instances
- *  of these doorbells for the host and 31 virtual machines respectively.
- *  The host and VMs will only map the doorbell pages belonging to its
- *  protection domain. It will not be able to touch the doorbells for
- *  another VM. The doorbells are the only registers directly accessible
- *  by a virtual machine. Similarly, there are 511 additional
- *  doorbells for RDMA protection domains. PD 0 for RDMA shares
- *  the same physical protection domain doorbell page as ETH/iSCSI.
- *
- */
-struct BE_PROTECTION_DOMAIN_DBMAP_AMAP {
-	u8 rsvd0[512];	/* DWORD 0 */
-	struct BE_SQ_DB_AMAP rdma_sq_db;
-	u8 rsvd1[7][32];	/* DWORD 17 */
-	struct BE_WRB_POST_DB_AMAP iscsi_wrb_post_db;
-	u8 rsvd2[7][32];	/* DWORD 25 */
-	struct BE_SQ_DB_AMAP etx_sq_db;
-	u8 rsvd3[7][32];	/* DWORD 33 */
-	struct BE_RQ_DB_AMAP rdma_rq_db;
-	u8 rsvd4[7][32];	/* DWORD 41 */
-	struct BE_DEFAULT_PDU_DB_AMAP iscsi_default_pdu_db;
-	u8 rsvd5[7][32];	/* DWORD 49 */
-	struct BE_TPM_RQ_DB_AMAP tpm_rq_db;
-	u8 rsvd6[7][32];	/* DWORD 57 */
-	struct BE_RQ_DB_AMAP erx_rq_db;
-	u8 rsvd7[7][32];	/* DWORD 65 */
-	struct BE_CQ_DB_AMAP cq_db;
-	u8 rsvd8[7][32];	/* DWORD 73 */
-	struct BE_MCC_DB_AMAP mpu_mcc_db;
-	u8 rsvd9[7][32];	/* DWORD 81 */
-	struct BE_MPU_MAILBOX_DB_AMAP mcc_bootstrap_db;
-	u8 rsvd10[935][32];	/* DWORD 89 */
-} __packed;
-struct PROTECTION_DOMAIN_DBMAP_AMAP {
-	u32 dw[1024];
-};
-
-#endif /* __doorbells_amap_h__ */
diff --git a/drivers/staging/benet/ep.h b/drivers/staging/benet/ep.h
deleted file mode 100644
index 72fcf64a9ff..00000000000
--- a/drivers/staging/benet/ep.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __ep_amap_h__
-#define __ep_amap_h__
-
-/* General Control and Status Register. */
-struct BE_EP_CONTROL_CSR_AMAP {
-	u8 m0_RxPbuf;	/* DWORD 0 */
-	u8 m1_RxPbuf;	/* DWORD 0 */
-	u8 m2_RxPbuf;	/* DWORD 0 */
-	u8 ff_en;		/* DWORD 0 */
-	u8 rsvd0[27];	/* DWORD 0 */
-	u8 CPU_reset;	/* DWORD 0 */
-} __packed;
-struct EP_CONTROL_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Semaphore Register. */
-struct BE_EP_SEMAPHORE_CSR_AMAP {
-	u8 value[32];	/* DWORD 0 */
-} __packed;
-struct EP_SEMAPHORE_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Embedded Processor Specific Registers. */
-struct BE_EP_CSRMAP_AMAP {
-	struct BE_EP_CONTROL_CSR_AMAP ep_control;
-	u8 rsvd0[32];	/* DWORD 1 */
-	u8 rsvd1[32];	/* DWORD 2 */
-	u8 rsvd2[32];	/* DWORD 3 */
-	u8 rsvd3[32];	/* DWORD 4 */
-	u8 rsvd4[32];	/* DWORD 5 */
-	u8 rsvd5[8][128];	/* DWORD 6 */
-	u8 rsvd6[32];	/* DWORD 38 */
-	u8 rsvd7[32];	/* DWORD 39 */
-	u8 rsvd8[32];	/* DWORD 40 */
-	u8 rsvd9[32];	/* DWORD 41 */
-	u8 rsvd10[32];	/* DWORD 42 */
-	struct BE_EP_SEMAPHORE_CSR_AMAP ep_semaphore;
-	u8 rsvd11[32];	/* DWORD 44 */
-	u8 rsvd12[19][32];	/* DWORD 45 */
-} __packed;
-struct EP_CSRMAP_AMAP {
-	u32 dw[64];
-};
-
-#endif /* __ep_amap_h__ */
diff --git a/drivers/staging/benet/eq.c b/drivers/staging/benet/eq.c
deleted file mode 100644
index db92ccd8fed..00000000000
--- a/drivers/staging/benet/eq.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include "hwlib.h"
-#include "bestatus.h"
-/*
-    This routine creates an event queue based on the client completion
-    queue configuration information.
-
-    FunctionObject      - Handle to a function object
-    EqBaseVa            - Base VA for a the EQ ring
-    SizeEncoding        - The encoded size for the EQ entries. This value is
-			either CEV_EQ_SIZE_4 or CEV_EQ_SIZE_16
-    NumEntries          - CEV_CQ_CNT_* values.
-    Watermark           - Enables watermark based coalescing.  This parameter
-			must be of the type CEV_WMARK_* if watermarks
-			are enabled.  If watermarks to to be disabled
-			this value should be-1.
-    TimerDelay          - If a timer delay is enabled this value should be the
-			time of the delay in 8 microsecond units.  If
-			delays are not used this parameter should be
-			set to -1.
-    ppEqObject          - Internal EQ Handle returned.
-
-    Returns BE_SUCCESS if successfull,, otherwise a useful error code
-	is returned.
-
-    IRQL < DISPATCH_LEVEL
-*/
-int
-be_eq_create(struct be_function_object *pfob,
-		struct ring_desc *rd, u32 eqe_size, u32 num_entries,
-		u32 watermark,	/* CEV_WMARK_* or -1 */
-		u32 timer_delay,	/* in 8us units, or -1 */
-		struct be_eq_object *eq_object)
-{
-	int status = BE_SUCCESS;
-	u32 num_entries_encoding, eqe_size_encoding, length;
-	struct FWCMD_COMMON_EQ_CREATE *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	u32 n;
-	unsigned long irql;
-
-	ASSERT(rd);
-	ASSERT(eq_object);
-
-	switch (num_entries) {
-	case 256:
-		num_entries_encoding = CEV_EQ_CNT_256;
-		break;
-	case 512:
-		num_entries_encoding = CEV_EQ_CNT_512;
-		break;
-	case 1024:
-		num_entries_encoding = CEV_EQ_CNT_1024;
-		break;
-	case 2048:
-		num_entries_encoding = CEV_EQ_CNT_2048;
-		break;
-	case 4096:
-		num_entries_encoding = CEV_EQ_CNT_4096;
-		break;
-	default:
-		ASSERT(0);
-		return BE_STATUS_INVALID_PARAMETER;
-	}
-
-	switch (eqe_size) {
-	case 4:
-		eqe_size_encoding = CEV_EQ_SIZE_4;
-		break;
-	case 16:
-		eqe_size_encoding = CEV_EQ_SIZE_16;
-		break;
-	default:
-		ASSERT(0);
-		return BE_STATUS_INVALID_PARAMETER;
-	}
-
-	if ((eqe_size == 4 && num_entries < 1024) ||
-	    (eqe_size == 16 && num_entries == 4096)) {
-		TRACE(DL_ERR, "Bad EQ size. eqe_size:%d num_entries:%d",
-		      eqe_size, num_entries);
-		ASSERT(0);
-		return BE_STATUS_INVALID_PARAMETER;
-	}
-
-	memset(eq_object, 0, sizeof(*eq_object));
-
-	atomic_set(&eq_object->ref_count, 0);
-	eq_object->parent_function = pfob;
-	eq_object->eq_id = 0xFFFFFFFF;
-
-	INIT_LIST_HEAD(&eq_object->cq_list_head);
-
-	length = num_entries * eqe_size;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		ASSERT(wrb);
-		TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto Error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_EQ_CREATE);
-
-	fwcmd->params.request.num_pages = PAGES_SPANNED(OFFSET_IN_PAGE(rd->va),
-									length);
-	n = pfob->pci_function_number;
-	AMAP_SET_BITS_PTR(EQ_CONTEXT, Func, &fwcmd->params.request.context, n);
-
-	AMAP_SET_BITS_PTR(EQ_CONTEXT, valid, &fwcmd->params.request.context, 1);
-
-	AMAP_SET_BITS_PTR(EQ_CONTEXT, Size,
-			&fwcmd->params.request.context, eqe_size_encoding);
-
-	n = 0; /* Protection Domain is always 0 in  Linux  driver */
-	AMAP_SET_BITS_PTR(EQ_CONTEXT, PD, &fwcmd->params.request.context, n);
-
-	/* Let the caller ARM the EQ with the doorbell. */
-	AMAP_SET_BITS_PTR(EQ_CONTEXT, Armed, &fwcmd->params.request.context, 0);
-
-	AMAP_SET_BITS_PTR(EQ_CONTEXT, Count, &fwcmd->params.request.context,
-					num_entries_encoding);
-
-	n = pfob->pci_function_number * 32;
-	AMAP_SET_BITS_PTR(EQ_CONTEXT, EventVect,
-				&fwcmd->params.request.context, n);
-	if (watermark != -1) {
-		AMAP_SET_BITS_PTR(EQ_CONTEXT, WME,
-				&fwcmd->params.request.context, 1);
-		AMAP_SET_BITS_PTR(EQ_CONTEXT, Watermark,
-				&fwcmd->params.request.context, watermark);
-		ASSERT(watermark <= CEV_WMARK_240);
-	} else
-		AMAP_SET_BITS_PTR(EQ_CONTEXT, WME,
-					&fwcmd->params.request.context, 0);
-	if (timer_delay != -1) {
-		AMAP_SET_BITS_PTR(EQ_CONTEXT, TMR,
-					&fwcmd->params.request.context, 1);
-
-		ASSERT(timer_delay <= 250);	/* max value according to EAS */
-		timer_delay = min(timer_delay, (u32)250);
-
-		AMAP_SET_BITS_PTR(EQ_CONTEXT, Delay,
-				&fwcmd->params.request.context, timer_delay);
-	} else {
-		AMAP_SET_BITS_PTR(EQ_CONTEXT, TMR,
-				&fwcmd->params.request.context, 0);
-	}
-	/* Create a page list for the FWCMD. */
-	be_rd_to_pa_list(rd, fwcmd->params.request.pages,
-			  ARRAY_SIZE(fwcmd->params.request.pages));
-
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-					NULL, NULL, fwcmd, NULL);
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "MCC to create EQ failed.");
-		goto Error;
-	}
-	/* Get the EQ id.  The MPU allocates the IDs. */
-	eq_object->eq_id = fwcmd->params.response.eq_id;
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    Deferences the given object. Once the object's reference count drops to
-    zero, the object is destroyed and all resources that are held by this
-    object are released.  The on-chip context is also destroyed along with
-    the queue ID, and any mappings made into the UT.
-
-    eq_object            - EQ handle returned from eq_object_create.
-
-    Returns BE_SUCCESS if successfull, otherwise a useful error code
-	is returned.
-
-    IRQL: IRQL < DISPATCH_LEVEL
-*/
-int be_eq_destroy(struct be_eq_object *eq_object)
-{
-	int status = 0;
-
-	ASSERT(atomic_read(&eq_object->ref_count) == 0);
-	/* no CQs should reference this EQ now */
-	ASSERT(list_empty(&eq_object->cq_list_head));
-
-	/* Send fwcmd to destroy the EQ. */
-	status = be_function_ring_destroy(eq_object->parent_function,
-			     eq_object->eq_id, FWCMD_RING_TYPE_EQ,
-					NULL, NULL, NULL, NULL);
-	ASSERT(status == 0);
-
-	return BE_SUCCESS;
-}
-/*
- *---------------------------------------------------------------------------
- * Function: be_eq_modify_delay
- *   Changes the EQ delay for a group of EQs.
- * num_eq             - The number of EQs in the eq_array to adjust.
- * 			This also is the number of delay values in
- * 			the eq_delay_array.
- * eq_array           - Array of struct be_eq_object pointers to adjust.
- * eq_delay_array     - Array of "num_eq" timer delays in units
- * 			of microseconds. The be_eq_query_delay_range
- * 			fwcmd returns the resolution and range of
- *                      legal EQ delays.
- * cb           -
- * cb_context   -
- * q_ctxt             - Optional. Pointer to a previously allocated
- * 			struct. If the MCC WRB ring is full, this
- * 			structure is used to queue the operation. It
- *                      will be posted to the MCC ring when space
- *                      becomes available. All queued commands will
- *                      be posted to the ring in the order they are
- *                      received. It is always valid to pass a pointer to
- *                      a generic be_generic_q_cntxt. However,
- *                      the specific context structs
- *                      are generally smaller than the generic struct.
- * return pend_status - BE_SUCCESS (0) on success.
- * 			BE_PENDING (postive value) if the FWCMD
- *                      completion is pending. Negative error code on failure.
- *-------------------------------------------------------------------------
- */
-int
-be_eq_modify_delay(struct be_function_object *pfob,
-		   u32 num_eq, struct be_eq_object **eq_array,
-		   u32 *eq_delay_array, mcc_wrb_cqe_callback cb,
-		   void *cb_context, struct be_eq_modify_delay_q_ctxt *q_ctxt)
-{
-	struct FWCMD_COMMON_MODIFY_EQ_DELAY *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	struct be_generic_q_ctxt *gen_ctxt = NULL;
-	u32 i;
-	unsigned long irql;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		if (q_ctxt && cb) {
-			wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
-			gen_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
-			gen_ctxt->context.bytes = sizeof(*q_ctxt);
-		} else {
-			status = BE_STATUS_NO_MCC_WRB;
-			goto Error;
-		}
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_MODIFY_EQ_DELAY);
-
-	ASSERT(num_eq > 0);
-	ASSERT(num_eq <= ARRAY_SIZE(fwcmd->params.request.delay));
-	fwcmd->params.request.num_eq = num_eq;
-	for (i = 0; i < num_eq; i++) {
-		fwcmd->params.request.delay[i].eq_id = eq_array[i]->eq_id;
-		fwcmd->params.request.delay[i].delay_in_microseconds =
-		    eq_delay_array[i];
-	}
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, gen_ctxt,
-			cb, cb_context, NULL, NULL, fwcmd, NULL);
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
diff --git a/drivers/staging/benet/eth.c b/drivers/staging/benet/eth.c
deleted file mode 100644
index f641b6260d0..00000000000
--- a/drivers/staging/benet/eth.c
+++ /dev/null
@@ -1,1273 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include <linux/if_ether.h>
-#include "hwlib.h"
-#include "bestatus.h"
-
-/*
- *---------------------------------------------------------
- * Function: be_eth_sq_create_ex
- *   Creates an ethernet send ring - extended version with
- *   additional parameters.
- * pfob -
- * rd             - ring address
- * length_in_bytes -
- * type            - The type of ring to create.
- * ulp             - The requested ULP number for the ring.
- * 		     This should be zero based, i.e. 0,1,2. This must
- * 		     be valid NIC ULP based on the firmware config.
- *                   All doorbells for this ring must be sent to
- *                   this ULP. The first network ring allocated for
- *                   each ULP are higher performance than subsequent rings.
- * cq_object       - cq object for completions
- * ex_parameters   - Additional parameters (that may increase in
- * 		     future revisions). These parameters are only used
- * 		     for certain ring types -- see
- *                   struct be_eth_sq_parameters for details.
- * eth_sq          -
- * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
- *---------------------------------------------------------
- */
-int
-be_eth_sq_create_ex(struct be_function_object *pfob, struct ring_desc *rd,
-		u32 length, u32 type, u32 ulp, struct be_cq_object *cq_object,
-		struct be_eth_sq_parameters *ex_parameters,
-		struct be_ethsq_object *eth_sq)
-{
-	struct FWCMD_COMMON_ETH_TX_CREATE *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	u32 n;
-	unsigned long irql;
-
-	ASSERT(rd);
-	ASSERT(eth_sq);
-	ASSERT(ex_parameters);
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	memset(eth_sq, 0, sizeof(*eth_sq));
-
-	eth_sq->parent_function = pfob;
-	eth_sq->bid = 0xFFFFFFFF;
-	eth_sq->cq_object = cq_object;
-
-	/* Translate hwlib interface to arm interface. */
-	switch (type) {
-	case BE_ETH_TX_RING_TYPE_FORWARDING:
-		type = ETH_TX_RING_TYPE_FORWARDING;
-		break;
-	case BE_ETH_TX_RING_TYPE_STANDARD:
-		type = ETH_TX_RING_TYPE_STANDARD;
-		break;
-	case BE_ETH_TX_RING_TYPE_BOUND:
-		ASSERT(ex_parameters->port < 2);
-		type = ETH_TX_RING_TYPE_BOUND;
-		break;
-	default:
-		TRACE(DL_ERR, "Invalid eth tx ring type:%d", type);
-		return BE_NOT_OK;
-		break;
-	}
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		ASSERT(wrb);
-		TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto Error;
-	}
-	/* NIC must be supported by the current config. */
-	ASSERT(pfob->fw_config.nic_ulp_mask);
-
-	/*
-	 * The ulp parameter must select a valid NIC ULP
-	 * for the current config.
-	 */
-	ASSERT((1 << ulp) & pfob->fw_config.nic_ulp_mask);
-
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_ETH_TX_CREATE);
-	fwcmd->header.request.port_number = ex_parameters->port;
-
-	AMAP_SET_BITS_PTR(ETX_CONTEXT, pd_id,
-				&fwcmd->params.request.context, 0);
-
-	n = be_ring_length_to_encoding(length, sizeof(struct ETH_WRB_AMAP));
-	AMAP_SET_BITS_PTR(ETX_CONTEXT, tx_ring_size,
-					&fwcmd->params.request.context, n);
-
-	AMAP_SET_BITS_PTR(ETX_CONTEXT, cq_id_send,
-			&fwcmd->params.request.context, cq_object->cq_id);
-
-	n = pfob->pci_function_number;
-	AMAP_SET_BITS_PTR(ETX_CONTEXT, func, &fwcmd->params.request.context, n);
-
-	fwcmd->params.request.type = type;
-	fwcmd->params.request.ulp_num  = (1 << ulp);
-	fwcmd->params.request.num_pages = DIV_ROUND_UP(length, PAGE_SIZE);
-	ASSERT(PAGES_SPANNED(rd->va, rd->length) >=
-				fwcmd->params.request.num_pages);
-
-	/* Create a page list for the FWCMD. */
-	be_rd_to_pa_list(rd, fwcmd->params.request.pages,
-			  ARRAY_SIZE(fwcmd->params.request.pages));
-
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-					NULL, NULL, fwcmd, NULL);
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "MCC to create etx queue failed.");
-		goto Error;
-	}
-	/* save the butler ID */
-	eth_sq->bid = fwcmd->params.response.cid;
-
-	/* add a reference to the corresponding CQ */
-	atomic_inc(&cq_object->ref_count);
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-
-/*
-    This routine destroys an ethernet send queue
-
-    EthSq - EthSq Handle returned from EthSqCreate
-
-    This function always return BE_SUCCESS.
-
-    This function frees memory allocated by EthSqCreate for the EthSq Object.
-
-*/
-int be_eth_sq_destroy(struct be_ethsq_object *eth_sq)
-{
-	int status = 0;
-
-	/* Send fwcmd to destroy the queue. */
-	status = be_function_ring_destroy(eth_sq->parent_function, eth_sq->bid,
-		     FWCMD_RING_TYPE_ETH_TX, NULL, NULL, NULL, NULL);
-	ASSERT(status == 0);
-
-	/* Derefence any associated CQs. */
-	atomic_dec(&eth_sq->cq_object->ref_count);
-	return status;
-}
-/*
-    This routine attempts to set the transmit flow control parameters.
-
-    FunctionObject      - Handle to a function object
-
-    txfc_enable         - transmit flow control enable - true for
-			  enable, false for disable
-
-    rxfc_enable         - receive flow control enable - true for
-				enable, false for disable
-
-    Returns BE_SUCCESS if successfull, otherwise a useful int error
-    code is returned.
-
-    IRQL: < DISPATCH_LEVEL
-
-    This function always fails in non-privileged machine context.
-*/
-int
-be_eth_set_flow_control(struct be_function_object *pfob,
-			bool txfc_enable, bool rxfc_enable)
-{
-	struct FWCMD_COMMON_SET_FLOW_CONTROL *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_FLOW_CONTROL);
-
-	fwcmd->params.request.rx_flow_control = rxfc_enable;
-	fwcmd->params.request.tx_flow_control = txfc_enable;
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-					NULL, NULL, fwcmd, NULL);
-
-	if (status != 0) {
-		TRACE(DL_ERR, "set flow control fwcmd failed.");
-		goto error;
-	}
-
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    This routine attempts to get the transmit flow control parameters.
-
-    pfob      - Handle to a function object
-
-    txfc_enable         - transmit flow control enable - true for
-			enable, false for disable
-
-    rxfc_enable         - receive flow control enable - true for enable,
-			false for disable
-
-    Returns BE_SUCCESS if successfull, otherwise a useful int error code
-			is returned.
-
-    IRQL: < DISPATCH_LEVEL
-
-    This function always fails in non-privileged machine context.
-*/
-int
-be_eth_get_flow_control(struct be_function_object *pfob,
-			bool *txfc_enable, bool *rxfc_enable)
-{
-	struct FWCMD_COMMON_GET_FLOW_CONTROL *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_FLOW_CONTROL);
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-						NULL, NULL, fwcmd, NULL);
-
-	if (status != 0) {
-		TRACE(DL_ERR, "get flow control fwcmd failed.");
-		goto error;
-	}
-
-	*txfc_enable = fwcmd->params.response.tx_flow_control;
-	*rxfc_enable = fwcmd->params.response.rx_flow_control;
-
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
- *---------------------------------------------------------
- * Function: be_eth_set_qos
- *   This function sets the ethernet transmit Quality of Service (QoS)
- *   characteristics of BladeEngine for the domain. All ethernet
- *   transmit rings of the domain will evenly share the bandwidth.
- *   The exeception to sharing is the host primary (super) ethernet
- *   transmit ring as well as the host ethernet forwarding ring
- *   for missed offload data.
- * pfob -
- * max_bps         - the maximum bits per second in units of
- * 			10 Mbps (valid 0-100)
- * max_pps         - the maximum packets per second in units
- * 			of 1 Kpps (0 indicates no limit)
- * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
- *---------------------------------------------------------
- */
-int
-be_eth_set_qos(struct be_function_object *pfob, u32 max_bps, u32 max_pps)
-{
-	struct FWCMD_COMMON_SET_QOS *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_QOS);
-
-	/* Set fields in fwcmd */
-	fwcmd->params.request.max_bits_per_second_NIC = max_bps;
-	fwcmd->params.request.max_packets_per_second_NIC = max_pps;
-	fwcmd->params.request.valid_flags = QOS_BITS_NIC | QOS_PKTS_NIC;
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-					NULL, NULL, fwcmd, NULL);
-
-	if (status != 0)
-		TRACE(DL_ERR, "network set qos fwcmd failed.");
-
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
- *---------------------------------------------------------
- * Function: be_eth_get_qos
- *   This function retrieves the ethernet transmit Quality of Service (QoS)
- *   characteristics for the domain.
- * max_bps         - the maximum bits per second in units of
- * 			10 Mbps (valid 0-100)
- * max_pps         - the maximum packets per second in units of
- * 			1 Kpps (0 indicates no limit)
- * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
- *---------------------------------------------------------
- */
-int
-be_eth_get_qos(struct be_function_object *pfob, u32 *max_bps, u32 *max_pps)
-{
-	struct FWCMD_COMMON_GET_QOS *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_QOS);
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-					NULL, NULL, fwcmd, NULL);
-
-	if (status != 0) {
-		TRACE(DL_ERR, "network get qos fwcmd failed.");
-		goto error;
-	}
-
-	*max_bps = fwcmd->params.response.max_bits_per_second_NIC;
-	*max_pps = fwcmd->params.response.max_packets_per_second_NIC;
-
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
- *---------------------------------------------------------
- * Function: be_eth_set_frame_size
- *   This function sets the ethernet maximum frame size. The previous
- *   values are returned.
- * pfob -
- * tx_frame_size   - maximum transmit frame size in bytes
- * rx_frame_size   - maximum receive frame size in bytes
- * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
- *---------------------------------------------------------
- */
-int
-be_eth_set_frame_size(struct be_function_object *pfob,
-		      u32 *tx_frame_size, u32 *rx_frame_size)
-{
-	struct FWCMD_COMMON_SET_FRAME_SIZE *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_FRAME_SIZE);
-	fwcmd->params.request.max_tx_frame_size = *tx_frame_size;
-	fwcmd->params.request.max_rx_frame_size = *rx_frame_size;
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-						NULL, NULL, fwcmd, NULL);
-
-	if (status != 0) {
-		TRACE(DL_ERR, "network set frame size fwcmd failed.");
-		goto error;
-	}
-
-	*tx_frame_size = fwcmd->params.response.chip_max_tx_frame_size;
-	*rx_frame_size = fwcmd->params.response.chip_max_rx_frame_size;
-
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-
-/*
-    This routine creates a Ethernet receive ring.
-
-    pfob      - handle to a function object
-    rq_base_va            - base VA for the default receive ring. this must be
-			exactly 8K in length and continguous physical memory.
-    cq_object            - handle to a previously created CQ to be associated
-			with the RQ.
-    pp_eth_rq             - pointer to an opqaue handle where an eth
-			receive object is returned.
-    Returns BE_SUCCESS if successfull, , otherwise a useful
-    int error code is returned.
-
-    IRQL: < DISPATCH_LEVEL
-    this function allocates a struct be_ethrq_object *object.
-    there must be no more than 1 of these per function object, unless the
-    function object supports RSS (is networking and on the host).
-    the rq_base_va must point to a buffer of exactly 8K.
-    the erx::host_cqid (or host_stor_cqid) register and erx::ring_page registers
-    will be updated as appropriate on return
-*/
-int
-be_eth_rq_create(struct be_function_object *pfob,
-			struct ring_desc *rd, struct be_cq_object *cq_object,
-			struct be_cq_object *bcmc_cq_object,
-			struct be_ethrq_object *eth_rq)
-{
-	int status = 0;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	struct FWCMD_COMMON_ETH_RX_CREATE *fwcmd = NULL;
-	unsigned long irql;
-
-	/* MPU will set the  */
-	ASSERT(rd);
-	ASSERT(eth_rq);
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	eth_rq->parent_function = pfob;
-	eth_rq->cq_object = cq_object;
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto Error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_ETH_RX_CREATE);
-
-	fwcmd->params.request.num_pages = 2;	/* required length */
-	fwcmd->params.request.cq_id = cq_object->cq_id;
-
-	if (bcmc_cq_object)
-		fwcmd->params.request.bcmc_cq_id = bcmc_cq_object->cq_id;
-	else
-		fwcmd->params.request.bcmc_cq_id = 0xFFFF;
-
-	/* Create a page list for the FWCMD. */
-	be_rd_to_pa_list(rd, fwcmd->params.request.pages,
-			  ARRAY_SIZE(fwcmd->params.request.pages));
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-						NULL, NULL, fwcmd, NULL);
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "fwcmd to map eth rxq frags failed.");
-		goto Error;
-	}
-	/* Save the ring ID for cleanup. */
-	eth_rq->rid = fwcmd->params.response.id;
-
-	atomic_inc(&cq_object->ref_count);
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    This routine destroys an Ethernet receive queue
-
-    eth_rq - ethernet receive queue handle returned from eth_rq_create
-
-    Returns BE_SUCCESS on success and an appropriate int on failure.
-
-    This function frees resourcs allocated by EthRqCreate.
-    The erx::host_cqid (or host_stor_cqid) register and erx::ring_page
-    registers will be updated as appropriate on return
-    IRQL: < DISPATCH_LEVEL
-*/
-
-static void be_eth_rq_destroy_internal_cb(void *context, int status,
-					 struct MCC_WRB_AMAP *wrb)
-{
-	struct be_ethrq_object *eth_rq = (struct be_ethrq_object *) context;
-
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "Destroy eth rq failed in internal callback.\n");
-	} else {
-		/* Dereference any CQs associated with this queue. */
-		atomic_dec(&eth_rq->cq_object->ref_count);
-	}
-
-	return;
-}
-
-int be_eth_rq_destroy(struct be_ethrq_object *eth_rq)
-{
-	int status = BE_SUCCESS;
-
-	/* Send fwcmd to destroy the RQ. */
-	status = be_function_ring_destroy(eth_rq->parent_function,
-			eth_rq->rid, FWCMD_RING_TYPE_ETH_RX, NULL, NULL,
-			be_eth_rq_destroy_internal_cb, eth_rq);
-
-	return status;
-}
-
-/*
- *---------------------------------------------------------------------------
- * Function: be_eth_rq_destroy_options
- *   Destroys an ethernet receive ring with finer granularity options
- *   than the standard be_eth_rq_destroy() API function.
- * eth_rq           -
- * flush            - Set to 1 to flush the ring, set to 0 to bypass the flush
- * cb               - Callback function on completion
- * cb_context       - Callback context
- * return status    - BE_SUCCESS (0) on success. Negative error code on failure.
- *----------------------------------------------------------------------------
- */
-int
-be_eth_rq_destroy_options(struct be_ethrq_object *eth_rq, bool flush,
-		mcc_wrb_cqe_callback cb, void *cb_context)
-{
-	struct FWCMD_COMMON_RING_DESTROY *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = BE_SUCCESS;
-	struct be_function_object *pfob = NULL;
-	unsigned long irql;
-
-	pfob = eth_rq->parent_function;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	TRACE(DL_INFO, "Destroy eth_rq ring id:%d, flush:%d", eth_rq->rid,
-	      flush);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		ASSERT(wrb);
-		TRACE(DL_ERR, "No free MCC WRBs in destroy eth_rq ring.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto Error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_RING_DESTROY);
-
-	fwcmd->params.request.id = eth_rq->rid;
-	fwcmd->params.request.ring_type = FWCMD_RING_TYPE_ETH_RX;
-	fwcmd->params.request.bypass_flush = ((0 == flush) ? 1 : 0);
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb, cb_context,
-			be_eth_rq_destroy_internal_cb, eth_rq, fwcmd, NULL);
-
-	if (status != BE_SUCCESS && status != BE_PENDING) {
-		TRACE(DL_ERR, "eth_rq ring destroy failed. id:%d, flush:%d",
-		      eth_rq->rid, flush);
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    This routine queries the frag size for erx.
-
-    pfob      - handle to a function object
-
-    frag_size_bytes       - erx frag size in bytes that is/was set.
-
-    Returns BE_SUCCESS if successfull, otherwise a useful int error
-    code is returned.
-
-    IRQL: < DISPATCH_LEVEL
-
-*/
-int
-be_eth_rq_get_frag_size(struct be_function_object *pfob, u32 *frag_size_bytes)
-{
-	struct FWCMD_ETH_GET_RX_FRAG_SIZE *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-
-	ASSERT(frag_size_bytes);
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		return BE_STATUS_NO_MCC_WRB;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_GET_RX_FRAG_SIZE);
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-				NULL, NULL, fwcmd, NULL);
-
-	if (status != 0) {
-		TRACE(DL_ERR, "get frag size fwcmd failed.");
-		goto error;
-	}
-
-	*frag_size_bytes = 1 << fwcmd->params.response.actual_fragsize_log2;
-
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    This routine attempts to set the frag size for erx.  If the frag size is
-    already set, the attempt fails and the current frag size is returned.
-
-    pfob      - Handle to a function object
-
-    frag_size       - Erx frag size in bytes that is/was set.
-
-    current_frag_size_bytes    - Pointer to location where currrent frag
-				 is to be rturned
-
-    Returns BE_SUCCESS if successfull, otherwise a useful int error
-    code is returned.
-
-    IRQL: < DISPATCH_LEVEL
-
-    This function always fails in non-privileged machine context.
-*/
-int
-be_eth_rq_set_frag_size(struct be_function_object *pfob,
-			u32 frag_size, u32 *frag_size_bytes)
-{
-	struct FWCMD_ETH_SET_RX_FRAG_SIZE *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-
-	ASSERT(frag_size_bytes);
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_SET_RX_FRAG_SIZE);
-
-	ASSERT(frag_size >= 128 && frag_size <= 16 * 1024);
-
-	/* This is the log2 of the fragsize.  This is not the exact
-	 * ERX encoding. */
-	fwcmd->params.request.new_fragsize_log2 = __ilog2_u32(frag_size);
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-				NULL, NULL, fwcmd, NULL);
-
-	if (status != 0) {
-		TRACE(DL_ERR, "set frag size fwcmd failed.");
-		goto error;
-	}
-
-	*frag_size_bytes = 1 << fwcmd->params.response.actual_fragsize_log2;
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-
-/*
-    This routine gets or sets a mac address for a domain
-    given the port and mac.
-
-    FunctionObject  - Function object handle.
-    port1           - Set to TRUE if this function will set/get the Port 1
-			address.  Only the host may set this to TRUE.
-    mac1            - Set to TRUE if this function will set/get the
-			MAC 1 address.  Only the host may set this to TRUE.
-    write           - Set to TRUE if this function should write the mac address.
-    mac_address      - Buffer of the mac address to read or write.
-
-    Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
-
-    IRQL: < DISPATCH_LEVEL
-*/
-int be_rxf_mac_address_read_write(struct be_function_object *pfob,
-		bool port1,	/* VM must always set to false */
-		bool mac1,	/* VM must always set to false */
-		bool mgmt, bool write,
-		bool permanent, u8 *mac_address,
-		mcc_wrb_cqe_callback cb,	/* optional */
-		void *cb_context)	/* optional */
-{
-	int status = BE_SUCCESS;
-	union {
-		struct FWCMD_COMMON_NTWK_MAC_QUERY *query;
-		struct FWCMD_COMMON_NTWK_MAC_SET *set;
-	} fwcmd = {NULL};
-	struct MCC_WRB_AMAP *wrb = NULL;
-	u32 type = 0;
-	unsigned long irql;
-	struct be_mcc_wrb_response_copy rc;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	ASSERT(mac_address);
-
-	ASSERT(port1 == false);
-	ASSERT(mac1 == false);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto Error;
-	}
-
-	if (mgmt) {
-		type = MAC_ADDRESS_TYPE_MANAGEMENT;
-	} else {
-		if (pfob->type == BE_FUNCTION_TYPE_NETWORK)
-			type = MAC_ADDRESS_TYPE_NETWORK;
-		else
-			type = MAC_ADDRESS_TYPE_STORAGE;
-	}
-
-	if (write) {
-		/* Prepares an embedded fwcmd, including
-		 * request/response sizes.
-		 */
-		fwcmd.set = BE_PREPARE_EMBEDDED_FWCMD(pfob,
-					       wrb, COMMON_NTWK_MAC_SET);
-
-		fwcmd.set->params.request.invalidate = 0;
-		fwcmd.set->params.request.mac1 = (mac1 ? 1 : 0);
-		fwcmd.set->params.request.port = (port1 ? 1 : 0);
-		fwcmd.set->params.request.type = type;
-
-		/* Copy the mac address to set. */
-		fwcmd.set->params.request.mac.SizeOfStructure =
-			    sizeof(fwcmd.set->params.request.mac);
-		memcpy(fwcmd.set->params.request.mac.MACAddress,
-			mac_address, ETH_ALEN);
-
-		/* Post the f/w command */
-		status = be_function_post_mcc_wrb(pfob, wrb, NULL,
-				cb, cb_context, NULL, NULL, fwcmd.set, NULL);
-
-	} else {
-
-		/*
-		 * Prepares an embedded fwcmd, including
-		 * request/response sizes.
-		 */
-		fwcmd.query = BE_PREPARE_EMBEDDED_FWCMD(pfob,
-					       wrb, COMMON_NTWK_MAC_QUERY);
-
-		fwcmd.query->params.request.mac1 = (mac1 ? 1 : 0);
-		fwcmd.query->params.request.port = (port1 ? 1 : 0);
-		fwcmd.query->params.request.type = type;
-		fwcmd.query->params.request.permanent = permanent;
-
-		rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_MAC_QUERY,
-						params.response.mac.MACAddress);
-		rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_MAC_QUERY,
-						params.response.mac.MACAddress);
-		rc.va = mac_address;
-		/* Post the f/w command (with a copy for the response) */
-		status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb,
-				cb_context, NULL, NULL, fwcmd.query, &rc);
-	}
-
-	if (status < 0) {
-		TRACE(DL_ERR, "mac set/query failed.");
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    This routine writes data to context memory.
-
-    pfob  - Function object handle.
-    mac_table     - Set to the 128-bit multicast address hash table.
-
-    Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
-
-    IRQL: < DISPATCH_LEVEL
-*/
-
-int be_rxf_multicast_config(struct be_function_object *pfob,
-		bool promiscuous, u32 num, u8 *mac_table,
-		mcc_wrb_cqe_callback cb,	/* optional */
-		void *cb_context,
-		struct be_multicast_q_ctxt *q_ctxt)
-{
-	int status = BE_SUCCESS;
-	struct FWCMD_COMMON_NTWK_MULTICAST_SET *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	struct be_generic_q_ctxt *generic_ctxt = NULL;
-	unsigned long irql;
-
-	ASSERT(num <= ARRAY_SIZE(fwcmd->params.request.mac));
-
-	if (num > ARRAY_SIZE(fwcmd->params.request.mac)) {
-		TRACE(DL_ERR, "Too many multicast addresses. BE supports %d.",
-		      (int) ARRAY_SIZE(fwcmd->params.request.mac));
-		return BE_NOT_OK;
-	}
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		if (q_ctxt && cb) {
-			wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
-			generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
-			generic_ctxt->context.bytes = sizeof(*q_ctxt);
-		} else {
-			status = BE_STATUS_NO_MCC_WRB;
-			goto Error;
-		}
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_MULTICAST_SET);
-
-	fwcmd->params.request.promiscuous = promiscuous;
-	if (!promiscuous) {
-		fwcmd->params.request.num_mac = num;
-		if (num > 0) {
-			ASSERT(mac_table);
-			memcpy(fwcmd->params.request.mac,
-						mac_table, ETH_ALEN * num);
-		}
-	}
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
-			cb, cb_context, NULL, NULL, fwcmd, NULL);
-	if (status < 0) {
-		TRACE(DL_ERR, "multicast fwcmd failed.");
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    This routine adds or removes a vlan tag from the rxf table.
-
-    FunctionObject  - Function object handle.
-    VLanTag         - VLan tag to add or remove.
-    Add             - Set to TRUE if this will add a vlan tag
-
-    Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
-
-    IRQL: < DISPATCH_LEVEL
-*/
-int be_rxf_vlan_config(struct be_function_object *pfob,
-		bool promiscuous, u32 num, u16 *vlan_tag_array,
-		mcc_wrb_cqe_callback cb,	/* optional */
-		void *cb_context,
-		struct be_vlan_q_ctxt *q_ctxt)	/* optional */
-{
-	int status = BE_SUCCESS;
-	struct FWCMD_COMMON_NTWK_VLAN_CONFIG *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	struct be_generic_q_ctxt *generic_ctxt = NULL;
-	unsigned long irql;
-
-	if (num > ARRAY_SIZE(fwcmd->params.request.vlan_tag)) {
-		TRACE(DL_ERR, "Too many VLAN tags.");
-		return BE_NOT_OK;
-	}
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		if (q_ctxt && cb) {
-			wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
-			generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
-			generic_ctxt->context.bytes = sizeof(*q_ctxt);
-		} else {
-			status = BE_STATUS_NO_MCC_WRB;
-			goto Error;
-		}
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_VLAN_CONFIG);
-
-	fwcmd->params.request.promiscuous = promiscuous;
-	if (!promiscuous) {
-		fwcmd->params.request.num_vlan = num;
-
-		if (num > 0) {
-			ASSERT(vlan_tag_array);
-			memcpy(fwcmd->params.request.vlan_tag, vlan_tag_array,
-				  num * sizeof(vlan_tag_array[0]));
-		}
-	}
-
-	/* Post the commadn */
-	status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
-			cb, cb_context, NULL, NULL, fwcmd, NULL);
-	if (status < 0) {
-		TRACE(DL_ERR, "vlan fwcmd failed.");
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-
-int be_rxf_link_status(struct be_function_object *pfob,
-		struct BE_LINK_STATUS *link_status,
-		mcc_wrb_cqe_callback cb,
-		void *cb_context,
-		struct be_link_status_q_ctxt *q_ctxt)
-{
-	struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	struct be_generic_q_ctxt *generic_ctxt = NULL;
-	unsigned long irql;
-	struct be_mcc_wrb_response_copy rc;
-
-	ASSERT(link_status);
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-
-	if (!wrb) {
-		if (q_ctxt && cb) {
-			wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
-			generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
-			generic_ctxt->context.bytes = sizeof(*q_ctxt);
-		} else {
-			status = BE_STATUS_NO_MCC_WRB;
-			goto Error;
-		}
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb,
-					       COMMON_NTWK_LINK_STATUS_QUERY);
-
-	rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY,
-					params.response);
-	rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY,
-					params.response);
-	rc.va = link_status;
-	/* Post or queue the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
-			cb, cb_context, NULL, NULL, fwcmd, &rc);
-
-	if (status < 0) {
-		TRACE(DL_ERR, "link status fwcmd failed.");
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-int
-be_rxf_query_eth_statistics(struct be_function_object *pfob,
-		    struct FWCMD_ETH_GET_STATISTICS *va_for_fwcmd,
-		    u64 pa_for_fwcmd, mcc_wrb_cqe_callback cb,
-		    void *cb_context,
-		    struct be_nonembedded_q_ctxt *q_ctxt)
-{
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	struct be_generic_q_ctxt *generic_ctxt = NULL;
-	unsigned long irql;
-
-	ASSERT(va_for_fwcmd);
-	ASSERT(pa_for_fwcmd);
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-
-	if (!wrb) {
-		if (q_ctxt && cb) {
-			wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
-			generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
-			generic_ctxt->context.bytes = sizeof(*q_ctxt);
-		} else {
-			status = BE_STATUS_NO_MCC_WRB;
-			goto Error;
-		}
-	}
-
-	TRACE(DL_INFO, "Query eth stats. fwcmd va:%p pa:0x%08x_%08x",
-	      va_for_fwcmd, upper_32_bits(pa_for_fwcmd), (u32)pa_for_fwcmd);
-
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	va_for_fwcmd = BE_PREPARE_NONEMBEDDED_FWCMD(pfob, wrb,
-			  va_for_fwcmd, pa_for_fwcmd, ETH_GET_STATISTICS);
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
-		cb, cb_context, NULL, NULL, va_for_fwcmd, NULL);
-	if (status < 0) {
-		TRACE(DL_ERR, "eth stats fwcmd failed.");
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-int
-be_rxf_promiscuous(struct be_function_object *pfob,
-		   bool enable_port0, bool enable_port1,
-		   mcc_wrb_cqe_callback cb, void *cb_context,
-		   struct be_promiscuous_q_ctxt *q_ctxt)
-{
-	struct FWCMD_ETH_PROMISCUOUS *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	struct be_generic_q_ctxt *generic_ctxt = NULL;
-	unsigned long irql;
-
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-
-	if (!wrb) {
-		if (q_ctxt && cb) {
-			wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
-			generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
-			generic_ctxt->context.bytes = sizeof(*q_ctxt);
-		} else {
-			status = BE_STATUS_NO_MCC_WRB;
-			goto Error;
-		}
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_PROMISCUOUS);
-
-	fwcmd->params.request.port0_promiscuous = enable_port0;
-	fwcmd->params.request.port1_promiscuous = enable_port1;
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
-			cb, cb_context, NULL, NULL, fwcmd, NULL);
-
-	if (status < 0) {
-		TRACE(DL_ERR, "promiscuous fwcmd failed.");
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-
-/*
- *-------------------------------------------------------------------------
- * Function: be_rxf_filter_config
- *   Configures BladeEngine ethernet receive filter settings.
- * pfob    -
- * settings           - Pointer to the requested filter settings.
- * 			The response from BladeEngine will be placed back
- * 			in this structure.
- * cb                 - optional
- * cb_context         - optional
- * q_ctxt             - Optional. Pointer to a previously allocated struct.
- * 			If the MCC WRB ring is full, this structure is
- * 			used to queue the operation. It will be posted
- * 			to the MCC ring when space becomes available. All
- *                      queued commands will be posted to the ring in
- *                      the order they are received. It is always valid
- *                      to pass a pointer to a generic
- *                      be_generic_q_ctxt. However, the specific
- *                      context structs are generally smaller than
- *                      the generic struct.
- * return pend_status - BE_SUCCESS (0) on success.
- * 			BE_PENDING (postive value) if the FWCMD
- *                      completion is pending. Negative error code on failure.
- *---------------------------------------------------------------------------
- */
-int
-be_rxf_filter_config(struct be_function_object *pfob,
-		     struct NTWK_RX_FILTER_SETTINGS *settings,
-		     mcc_wrb_cqe_callback cb, void *cb_context,
-		     struct be_rxf_filter_q_ctxt *q_ctxt)
-{
-	struct FWCMD_COMMON_NTWK_RX_FILTER *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	struct be_generic_q_ctxt *generic_ctxt = NULL;
-	unsigned long irql;
-	struct be_mcc_wrb_response_copy rc;
-
-	ASSERT(settings);
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-
-	if (!wrb) {
-		if (q_ctxt && cb) {
-			wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
-			generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
-			generic_ctxt->context.bytes = sizeof(*q_ctxt);
-		} else {
-			status = BE_STATUS_NO_MCC_WRB;
-			goto Error;
-		}
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_RX_FILTER);
-	memcpy(&fwcmd->params.request, settings, sizeof(*settings));
-
-	rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_RX_FILTER,
-					params.response);
-	rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_RX_FILTER,
-					params.response);
-	rc.va = settings;
-	/* Post or queue the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
-			cb, cb_context, NULL, NULL, fwcmd, &rc);
-
-	if (status < 0) {
-		TRACE(DL_ERR, "RXF/ERX filter config fwcmd failed.");
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
diff --git a/drivers/staging/benet/etx_context.h b/drivers/staging/benet/etx_context.h
deleted file mode 100644
index 554fbe5d127..00000000000
--- a/drivers/staging/benet/etx_context.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __etx_context_amap_h__
-#define __etx_context_amap_h__
-
-/* ETX ring  context structure. */
-struct BE_ETX_CONTEXT_AMAP {
-	u8 tx_cidx[11];	/* DWORD 0 */
-	u8 rsvd0[5];	/* DWORD 0 */
-	u8 rsvd1[16];	/* DWORD 0 */
-	u8 tx_pidx[11];	/* DWORD 1 */
-	u8 rsvd2;		/* DWORD 1 */
-	u8 tx_ring_size[4];	/* DWORD 1 */
-	u8 pd_id[5];	/* DWORD 1 */
-	u8 pd_id_not_valid;	/* DWORD 1 */
-	u8 cq_id_send[10];	/* DWORD 1 */
-	u8 rsvd3[32];	/* DWORD 2 */
-	u8 rsvd4[32];	/* DWORD 3 */
-	u8 cur_bytes[32];	/* DWORD 4 */
-	u8 max_bytes[32];	/* DWORD 5 */
-	u8 time_stamp[32];	/* DWORD 6 */
-	u8 rsvd5[11];	/* DWORD 7 */
-	u8 func;		/* DWORD 7 */
-	u8 rsvd6[20];	/* DWORD 7 */
-	u8 cur_txd_count[32];	/* DWORD 8 */
-	u8 max_txd_count[32];	/* DWORD 9 */
-	u8 rsvd7[32];	/* DWORD 10 */
-	u8 rsvd8[32];	/* DWORD 11 */
-	u8 rsvd9[32];	/* DWORD 12 */
-	u8 rsvd10[32];	/* DWORD 13 */
-	u8 rsvd11[32];	/* DWORD 14 */
-	u8 rsvd12[32];	/* DWORD 15 */
-} __packed;
-struct ETX_CONTEXT_AMAP {
-	u32 dw[16];
-};
-
-#endif /* __etx_context_amap_h__ */
diff --git a/drivers/staging/benet/funcobj.c b/drivers/staging/benet/funcobj.c
deleted file mode 100644
index 0f57eb58dae..00000000000
--- a/drivers/staging/benet/funcobj.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include "hwlib.h"
-#include "bestatus.h"
-
-
-int
-be_function_internal_query_firmware_config(struct be_function_object *pfob,
-				   struct BE_FIRMWARE_CONFIG *config)
-{
-	struct FWCMD_COMMON_FIRMWARE_CONFIG *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-	struct be_mcc_wrb_response_copy rc;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_FIRMWARE_CONFIG);
-
-	rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_FIRMWARE_CONFIG,
-					params.response);
-	rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_FIRMWARE_CONFIG,
-					params.response);
-	rc.va = config;
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL,
-					NULL, NULL, NULL, fwcmd, &rc);
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    This allocates and initializes a function object based on the information
-    provided by upper layer drivers.
-
-    Returns BE_SUCCESS on success and an appropriate int on failure.
-
-    A function object represents a single BladeEngine (logical) PCI function.
-    That is a function object either represents
-    the networking side of BladeEngine or the iSCSI side of BladeEngine.
-
-    This routine will also detect and create an appropriate PD object for the
-    PCI function as needed.
-*/
-int
-be_function_object_create(u8 __iomem *csr_va, u8 __iomem *db_va,
-		u8 __iomem *pci_va, u32 function_type,
-		struct ring_desc *mailbox, struct be_function_object *pfob)
-{
-	int status;
-
-	ASSERT(pfob);	/* not a magic assert */
-	ASSERT(function_type <= 2);
-
-	TRACE(DL_INFO, "Create function object. type:%s object:0x%p",
-	      (function_type == BE_FUNCTION_TYPE_ISCSI ? "iSCSI" :
-	       (function_type == BE_FUNCTION_TYPE_NETWORK ? "Network" :
-		"Arm")), pfob);
-
-	memset(pfob, 0, sizeof(*pfob));
-
-	pfob->type = function_type;
-	pfob->csr_va = csr_va;
-	pfob->db_va = db_va;
-	pfob->pci_va = pci_va;
-
-	spin_lock_init(&pfob->cq_lock);
-	spin_lock_init(&pfob->post_lock);
-	spin_lock_init(&pfob->mcc_context_lock);
-
-
-	pfob->pci_function_number = 1;
-
-
-	pfob->emulate = false;
-	TRACE(DL_NOTE, "Non-emulation mode");
-	status = be_drive_POST(pfob);
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "BladeEngine POST failed.");
-		goto error;
-	}
-
-	/* Initialize the mailbox */
-	status = be_mpu_init_mailbox(pfob, mailbox);
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "Failed to initialize mailbox.");
-		goto error;
-	}
-	/*
-	 * Cache the firmware config for ASSERTs in hwclib and later
-	 * driver queries.
-	 */
-	status = be_function_internal_query_firmware_config(pfob,
-					       &pfob->fw_config);
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "Failed to query firmware config.");
-		goto error;
-	}
-
-error:
-	if (status != BE_SUCCESS) {
-		/* No cleanup necessary */
-		TRACE(DL_ERR, "Failed to create function.");
-		memset(pfob, 0, sizeof(*pfob));
-	}
-	return status;
-}
-
-/*
-    This routine drops the reference count on a given function object. Once
-    the reference count falls to zero, the function object is destroyed and all
-    resources held are freed.
-
-    FunctionObject      - The function object to drop the reference to.
-*/
-int be_function_object_destroy(struct be_function_object *pfob)
-{
-	TRACE(DL_INFO, "Destroy pfob. Object:0x%p",
-	      pfob);
-
-
-	ASSERT(pfob->mcc == NULL);
-
-	return BE_SUCCESS;
-}
-
-int be_function_cleanup(struct be_function_object *pfob)
-{
-	int status = 0;
-	u32 isr;
-	u32 host_intr;
-	struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
-
-
-	if (pfob->type == BE_FUNCTION_TYPE_NETWORK) {
-		status = be_rxf_multicast_config(pfob, false, 0,
-						NULL, NULL, NULL, NULL);
-		ASSERT(status == BE_SUCCESS);
-	}
-	/* VLAN */
-	status = be_rxf_vlan_config(pfob, false, 0, NULL, NULL, NULL, NULL);
-	ASSERT(status == BE_SUCCESS);
-	/*
-	 * MCC Queue -- Switches to mailbox mode.  May want to destroy
-	 * all but the MCC CQ before this call if polling CQ is much better
-	 * performance than polling mailbox register.
-	 */
-	if (pfob->mcc)
-		status = be_mcc_ring_destroy(pfob->mcc);
-	/*
-	 * If interrupts are disabled, clear any CEV interrupt assertions that
-	 * fired after we stopped processing EQs.
-	 */
-	ctrl.dw[0] = PCICFG1_READ(pfob, host_timer_int_ctrl);
-	host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
-							hostintr, ctrl.dw);
-	if (!host_intr)
-		if (pfob->type == BE_FUNCTION_TYPE_NETWORK)
-			isr = CSR_READ(pfob, cev.isr1);
-		else
-			isr = CSR_READ(pfob, cev.isr0);
-	else
-		/* This should never happen... */
-		TRACE(DL_ERR, "function_cleanup called with interrupt enabled");
-	/* Function object destroy */
-	status = be_function_object_destroy(pfob);
-	ASSERT(status == BE_SUCCESS);
-
-	return status;
-}
-
-
-void *
-be_function_prepare_embedded_fwcmd(struct be_function_object *pfob,
-	struct MCC_WRB_AMAP *wrb, u32 payld_len, u32 request_length,
-	u32 response_length, u32 opcode, u32 subsystem)
-{
-	struct FWCMD_REQUEST_HEADER *header = NULL;
-	u32 n;
-
-	ASSERT(wrb);
-
-	n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
-	AMAP_SET_BITS_PTR(MCC_WRB, embedded, wrb, 1);
-	AMAP_SET_BITS_PTR(MCC_WRB, payload_length, wrb, min(payld_len, n));
-	header = (struct FWCMD_REQUEST_HEADER *)((u8 *)wrb + n);
-
-	header->timeout = 0;
-	header->domain = 0;
-	header->request_length = max(request_length, response_length);
-	header->opcode = opcode;
-	header->subsystem = subsystem;
-
-	return header;
-}
-
-void *
-be_function_prepare_nonembedded_fwcmd(struct be_function_object *pfob,
-	struct MCC_WRB_AMAP *wrb,
-	void *fwcmd_va, u64 fwcmd_pa,
-	u32 payld_len,
-	u32 request_length,
-	u32 response_length,
-	u32 opcode, u32 subsystem)
-{
-	struct FWCMD_REQUEST_HEADER *header = NULL;
-	u32 n;
-	struct MCC_WRB_PAYLOAD_AMAP *plp;
-
-	ASSERT(wrb);
-	ASSERT(fwcmd_va);
-
-	header = (struct FWCMD_REQUEST_HEADER *) fwcmd_va;
-
-	AMAP_SET_BITS_PTR(MCC_WRB, embedded, wrb, 0);
-	AMAP_SET_BITS_PTR(MCC_WRB, payload_length, wrb, payld_len);
-
-	/*
-	 * Assume one fragment. The caller may override the SGL by
-	 * rewriting the 0th length and adding more entries.  They
-	 * will also need to update the sge_count.
-	 */
-	AMAP_SET_BITS_PTR(MCC_WRB, sge_count, wrb, 1);
-
-	n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
-	plp = (struct MCC_WRB_PAYLOAD_AMAP *)((u8 *)wrb + n);
-	AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].length, plp, payld_len);
-	AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].pa_lo, plp, (u32)fwcmd_pa);
-	AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].pa_hi, plp,
-					upper_32_bits(fwcmd_pa));
-
-	header->timeout = 0;
-	header->domain = 0;
-	header->request_length = max(request_length, response_length);
-	header->opcode = opcode;
-	header->subsystem = subsystem;
-
-	return header;
-}
-
-struct MCC_WRB_AMAP *
-be_function_peek_mcc_wrb(struct be_function_object *pfob)
-{
-	struct MCC_WRB_AMAP *wrb = NULL;
-	u32 offset;
-
-	if (pfob->mcc)
-		wrb = _be_mpu_peek_ring_wrb(pfob->mcc, false);
-	else {
-		offset = offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8;
-		wrb = (struct MCC_WRB_AMAP *) ((u8 *) pfob->mailbox.va +
-				offset);
-	}
-
-	if (wrb)
-		memset(wrb, 0, sizeof(struct MCC_WRB_AMAP));
-
-	return wrb;
-}
-
-#if defined(BE_DEBUG)
-void be_function_debug_print_wrb(struct be_function_object *pfob,
-		struct MCC_WRB_AMAP *wrb, void *optional_fwcmd_va,
-		struct be_mcc_wrb_context *wrb_context)
-{
-
-	struct FWCMD_REQUEST_HEADER *header = NULL;
-	u8 embedded;
-	u32 n;
-
-	embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, wrb);
-
-	if (embedded) {
-		n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
-		header = (struct FWCMD_REQUEST_HEADER *)((u8 *)wrb + n);
-	} else {
-		header = (struct FWCMD_REQUEST_HEADER *) optional_fwcmd_va;
-	}
-
-	/* Save the completed count before posting for a debug assert. */
-
-	if (header) {
-		wrb_context->opcode = header->opcode;
-		wrb_context->subsystem = header->subsystem;
-
-	} else {
-		wrb_context->opcode = 0;
-		wrb_context->subsystem = 0;
-	}
-}
-#else
-#define be_function_debug_print_wrb(a_, b_, c_, d_)
-#endif
-
-int
-be_function_post_mcc_wrb(struct be_function_object *pfob,
-		struct MCC_WRB_AMAP *wrb,
-		struct be_generic_q_ctxt *q_ctxt,
-		mcc_wrb_cqe_callback cb, void *cb_context,
-		mcc_wrb_cqe_callback internal_cb,
-		void *internal_cb_context, void *optional_fwcmd_va,
-		struct be_mcc_wrb_response_copy *rc)
-{
-	int status;
-	struct be_mcc_wrb_context *wrb_context = NULL;
-	u64 *p;
-
-	if (q_ctxt) {
-		/* Initialize context.         */
-		q_ctxt->context.internal_cb = internal_cb;
-		q_ctxt->context.internal_cb_context = internal_cb_context;
-		q_ctxt->context.cb = cb;
-		q_ctxt->context.cb_context = cb_context;
-		if (rc) {
-			q_ctxt->context.copy.length = rc->length;
-			q_ctxt->context.copy.fwcmd_offset = rc->fwcmd_offset;
-			q_ctxt->context.copy.va = rc->va;
-		} else
-			q_ctxt->context.copy.length = 0;
-
-		q_ctxt->context.optional_fwcmd_va = optional_fwcmd_va;
-
-		/* Queue this request */
-		status = be_function_queue_mcc_wrb(pfob, q_ctxt);
-
-		goto Error;
-	}
-	/*
-	 * Allocate a WRB context struct to hold the callback pointers,
-	 * status, etc.  This is required if commands complete out of order.
-	 */
-	wrb_context = _be_mcc_allocate_wrb_context(pfob);
-	if (!wrb_context) {
-		TRACE(DL_WARN, "Failed to allocate MCC WRB context.");
-		status = BE_STATUS_SYSTEM_RESOURCES;
-		goto Error;
-	}
-	/* Initialize context. */
-	memset(wrb_context, 0, sizeof(*wrb_context));
-	wrb_context->internal_cb = internal_cb;
-	wrb_context->internal_cb_context = internal_cb_context;
-	wrb_context->cb = cb;
-	wrb_context->cb_context = cb_context;
-	if (rc) {
-		wrb_context->copy.length = rc->length;
-		wrb_context->copy.fwcmd_offset = rc->fwcmd_offset;
-		wrb_context->copy.va = rc->va;
-	} else
-		wrb_context->copy.length = 0;
-	wrb_context->wrb = wrb;
-
-	/*
-	 * Copy the context pointer into the WRB opaque tag field.
-	 * Verify assumption of 64-bit tag with a compile time assert.
-	 */
-	p = (u64 *) ((u8 *)wrb + offsetof(struct BE_MCC_WRB_AMAP, tag)/8);
-	*p = (u64)(size_t)wrb_context;
-
-	/* Print info about this FWCMD for debug builds. */
-	be_function_debug_print_wrb(pfob, wrb, optional_fwcmd_va, wrb_context);
-
-	/*
-	 * issue the WRB to the MPU as appropriate
-	 */
-	if (pfob->mcc) {
-		/*
-		 * we're in WRB mode, pass to the mcc layer
-		 */
-		status = _be_mpu_post_wrb_ring(pfob->mcc, wrb, wrb_context);
-	} else {
-		/*
-		 * we're in mailbox mode
-		 */
-		status = _be_mpu_post_wrb_mailbox(pfob, wrb, wrb_context);
-
-		/* mailbox mode always completes synchronously */
-		ASSERT(status != BE_STATUS_PENDING);
-	}
-
-Error:
-
-	return status;
-}
-
-int
-be_function_ring_destroy(struct be_function_object *pfob,
-		u32 id, u32 ring_type, mcc_wrb_cqe_callback cb,
-		void *cb_context, mcc_wrb_cqe_callback internal_cb,
-		void *internal_cb_context)
-{
-
-	struct FWCMD_COMMON_RING_DESTROY *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	int status = 0;
-	unsigned long irql;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	TRACE(DL_INFO, "Destroy ring id:%d type:%d", id, ring_type);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		ASSERT(wrb);
-		TRACE(DL_ERR, "No free MCC WRBs in destroy ring.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto Error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_RING_DESTROY);
-
-	fwcmd->params.request.id = id;
-	fwcmd->params.request.ring_type = ring_type;
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb, cb_context,
-				internal_cb, internal_cb_context, fwcmd, NULL);
-	if (status != BE_SUCCESS && status != BE_PENDING) {
-		TRACE(DL_ERR, "Ring destroy fwcmd failed. id:%d ring_type:%d",
-			id, ring_type);
-		goto Error;
-	}
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-void
-be_rd_to_pa_list(struct ring_desc *rd, struct PHYS_ADDR *pa_list, u32 max_num)
-{
-	u32 num_pages = PAGES_SPANNED(rd->va, rd->length);
-	u32 i = 0;
-	u64 pa = rd->pa;
-	__le64 lepa;
-
-	ASSERT(pa_list);
-	ASSERT(pa);
-
-	for (i = 0; i < min(num_pages, max_num); i++) {
-		lepa = cpu_to_le64(pa);
-		pa_list[i].lo = (u32)lepa;
-		pa_list[i].hi = upper_32_bits(lepa);
-		pa += PAGE_SIZE;
-	}
-}
-
-
-
-/*-----------------------------------------------------------------------------
- * Function: be_function_get_fw_version
- *   Retrieves the firmware version on the adpater. If the callback is
- *   NULL this call executes synchronously. If the callback is not NULL,
- *   the returned status will be BE_PENDING if the command was issued
- *   successfully.
- * pfob    -
- * fwv         - Pointer to response buffer if callback is NULL.
- * cb           - Callback function invoked when the FWCMD completes.
- * cb_context   - Passed to the callback function.
- * return pend_status - BE_SUCCESS (0) on success.
- * 			BE_PENDING (postive value) if the FWCMD
- *                      completion is pending. Negative error code on failure.
- *---------------------------------------------------------------------------
- */
-int
-be_function_get_fw_version(struct be_function_object *pfob,
-		struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD *fwv,
-		mcc_wrb_cqe_callback cb, void *cb_context)
-{
-	int status = BE_SUCCESS;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	struct FWCMD_COMMON_GET_FW_VERSION *fwcmd = NULL;
-	unsigned long irql;
-	struct be_mcc_wrb_response_copy rc;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		TRACE(DL_ERR, "MCC wrb peek failed.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto Error;
-	}
-
-	if (!cb && !fwv) {
-		TRACE(DL_ERR, "callback and response buffer NULL!");
-		status = BE_NOT_OK;
-		goto Error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_FW_VERSION);
-
-	rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_GET_FW_VERSION,
-					params.response);
-	rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_GET_FW_VERSION,
-					params.response);
-	rc.va = fwv;
-
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb,
-				cb_context, NULL, NULL, fwcmd, &rc);
-
-Error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-int
-be_function_queue_mcc_wrb(struct be_function_object *pfob,
-			  struct be_generic_q_ctxt *q_ctxt)
-{
-	int status;
-
-	ASSERT(q_ctxt);
-
-	/*
-	 * issue the WRB to the MPU as appropriate
-	 */
-	if (pfob->mcc) {
-
-		/* We're in ring mode.  Queue this item. */
-		pfob->mcc->backlog_length++;
-		list_add_tail(&q_ctxt->context.list, &pfob->mcc->backlog);
-		status = BE_PENDING;
-	} else {
-		status = BE_NOT_OK;
-	}
-	return status;
-}
-
diff --git a/drivers/staging/benet/fwcmd_common.h b/drivers/staging/benet/fwcmd_common.h
deleted file mode 100644
index 406e0d6fa98..00000000000
--- a/drivers/staging/benet/fwcmd_common.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_common_amap_h__
-#define __fwcmd_common_amap_h__
-#include "host_struct.h"
-
-/* --- PHY_LINK_DUPLEX_ENUM --- */
-#define PHY_LINK_DUPLEX_NONE            (0)
-#define PHY_LINK_DUPLEX_HALF            (1)
-#define PHY_LINK_DUPLEX_FULL            (2)
-
-/* --- PHY_LINK_SPEED_ENUM --- */
-#define PHY_LINK_SPEED_ZERO             (0)	/* No link. */
-#define PHY_LINK_SPEED_10MBPS           (1)	/* 10 Mbps */
-#define PHY_LINK_SPEED_100MBPS          (2)	/* 100 Mbps */
-#define PHY_LINK_SPEED_1GBPS            (3)	/* 1 Gbps */
-#define PHY_LINK_SPEED_10GBPS           (4)	/* 10 Gbps */
-
-/* --- PHY_LINK_FAULT_ENUM --- */
-#define PHY_LINK_FAULT_NONE             (0)	/* No fault status
-							available or detected */
-#define PHY_LINK_FAULT_LOCAL            (1)	/* Local fault detected */
-#define PHY_LINK_FAULT_REMOTE           (2)	/* Remote fault detected */
-
-/* --- BE_ULP_MASK --- */
-#define BE_ULP0_MASK                    (1)
-#define BE_ULP1_MASK                    (2)
-#define BE_ULP2_MASK                    (4)
-
-/* --- NTWK_ACTIVE_PORT --- */
-#define NTWK_PORT_A                     (0)	/* Port A is currently active */
-#define NTWK_PORT_B                     (1)	/* Port B is currently active */
-#define NTWK_NO_ACTIVE_PORT             (15)	/* Both ports have lost link */
-
-/* --- NTWK_LINK_TYPE --- */
-#define NTWK_LINK_TYPE_PHYSICAL         (0)	/* link up/down event
-						   applies to BladeEngine's
-						   Physical Ports
-						   */
-#define NTWK_LINK_TYPE_VIRTUAL          (1)	/* Virtual link up/down event
-						   reported by BladeExchange.
-						   This applies only when the
-						   VLD feature is enabled
-						   */
-
-/*
- * --- FWCMD_MAC_TYPE_ENUM ---
- * This enum defines the types of MAC addresses in the RXF MAC Address Table.
- */
-#define MAC_ADDRESS_TYPE_STORAGE        (0)	/* Storage MAC Address */
-#define MAC_ADDRESS_TYPE_NETWORK        (1)	/* Network MAC Address */
-#define MAC_ADDRESS_TYPE_PD             (2)	/* Protection Domain MAC Addr */
-#define MAC_ADDRESS_TYPE_MANAGEMENT     (3)	/* Managment MAC Address */
-
-
-/* --- FWCMD_RING_TYPE_ENUM --- */
-#define FWCMD_RING_TYPE_ETH_RX          (1)	/* Ring created with */
-					/* FWCMD_COMMON_ETH_RX_CREATE. */
-#define FWCMD_RING_TYPE_ETH_TX          (2)	/* Ring created with */
-					/* FWCMD_COMMON_ETH_TX_CREATE. */
-#define FWCMD_RING_TYPE_ISCSI_WRBQ      (3)	/* Ring created with */
-					/* FWCMD_COMMON_ISCSI_WRBQ_CREATE. */
-#define FWCMD_RING_TYPE_ISCSI_DEFQ      (4)	/* Ring created with */
-					/* FWCMD_COMMON_ISCSI_DEFQ_CREATE. */
-#define FWCMD_RING_TYPE_TPM_WRBQ        (5)	/* Ring created with */
-					/* FWCMD_COMMON_TPM_WRBQ_CREATE. */
-#define FWCMD_RING_TYPE_TPM_DEFQ        (6)	/* Ring created with */
-					/* FWCMD_COMMONTPM_TDEFQ_CREATE. */
-#define FWCMD_RING_TYPE_TPM_RQ          (7)	/* Ring created with */
-					/* FWCMD_COMMON_TPM_RQ_CREATE. */
-#define FWCMD_RING_TYPE_MCC             (8)	/* Ring created with */
-					/* FWCMD_COMMON_MCC_CREATE. */
-#define FWCMD_RING_TYPE_CQ              (9)	/* Ring created with */
-					/* FWCMD_COMMON_CQ_CREATE. */
-#define FWCMD_RING_TYPE_EQ              (10)	/* Ring created with */
-					/* FWCMD_COMMON_EQ_CREATE. */
-#define FWCMD_RING_TYPE_QP              (11)	/* Ring created with */
-					/* FWCMD_RDMA_QP_CREATE. */
-
-
-/* --- ETH_TX_RING_TYPE_ENUM --- */
-#define ETH_TX_RING_TYPE_FORWARDING     (1)	/* Ethernet ring for
-						   forwarding packets */
-#define ETH_TX_RING_TYPE_STANDARD       (2)	/* Ethernet ring for sending
-						   network packets. */
-#define ETH_TX_RING_TYPE_BOUND          (3)	/* Ethernet ring bound to the
-						   port specified in the command
-						   header.port_number field.
-						   Rings of this type are
-						   NOT subject to the
-						   failover logic implemented
-						   in the BladeEngine.
-						   */
-
-/* --- FWCMD_COMMON_QOS_TYPE_ENUM --- */
-#define QOS_BITS_NIC                    (1)	/* max_bits_per_second_NIC */
-						  /* field is valid.  */
-#define QOS_PKTS_NIC                    (2)	/* max_packets_per_second_NIC */
-						  /* field is valid.  */
-#define QOS_IOPS_ISCSI                  (4)	/* max_ios_per_second_iSCSI */
-						  /*field is valid.  */
-#define QOS_VLAN_TAG                    (8)	/* domain_VLAN_tag field
-						   is valid. */
-#define QOS_FABRIC_ID                   (16)	/* fabric_domain_ID field
-						   is valid. */
-#define QOS_OEM_PARAMS                  (32)	/* qos_params_oem field
-						   is valid. */
-#define QOS_TPUT_ISCSI                  (64)	/* max_bytes_per_second_iSCSI
-						   field  is valid.  */
-
-
-/*
- * --- FAILOVER_CONFIG_ENUM ---
- * Failover configuration setting used in FWCMD_COMMON_FORCE_FAILOVER
- */
-#define FAILOVER_CONFIG_NO_CHANGE       (0)	/* No change to automatic */
-						  /* port failover setting. */
-#define FAILOVER_CONFIG_ON              (1)	/* Automatic port failover
-						   on link down  is enabled. */
-#define FAILOVER_CONFIG_OFF             (2)	/* Automatic port failover
-						   on link down is disabled. */
-
-/*
- * --- FAILOVER_PORT_ENUM ---
- * Failover port setting used in FWCMD_COMMON_FORCE_FAILOVER
- */
-#define FAILOVER_PORT_A                 (0)	/* Selects port A. */
-#define FAILOVER_PORT_B                 (1)	/* Selects port B. */
-#define FAILOVER_PORT_NONE              (15)	/* No port change requested. */
-
-
-/*
- * --- MGMT_FLASHROM_OPCODE ---
- * Flash ROM operation code
- */
-#define MGMT_FLASHROM_OPCODE_FLASH      (1)	/* Commit downloaded data
-						   to Flash ROM */
-#define MGMT_FLASHROM_OPCODE_SAVE       (2)	/* Save downloaded data to
-						   ARM's DDR - do not flash */
-#define MGMT_FLASHROM_OPCODE_CLEAR      (3)	/* Erase specified component
-						   from FlashROM */
-#define MGMT_FLASHROM_OPCODE_REPORT     (4)	/* Read specified component
-						   from Flash ROM */
-#define MGMT_FLASHROM_OPCODE_IMAGE_INFO (5)	/* Returns size of a
-						   component */
-
-/*
- * --- MGMT_FLASHROM_OPTYPE ---
- * Flash ROM operation type
- */
-#define MGMT_FLASHROM_OPTYPE_CODE_FIRMWARE (0)	/* Includes ARM firmware,
-						   IPSec (optional) and EP
-						   firmware  */
-#define MGMT_FLASHROM_OPTYPE_CODE_REDBOOT (1)
-#define MGMT_FLASHROM_OPTYPE_CODE_BIOS  (2)
-#define MGMT_FLASHROM_OPTYPE_CODE_PXE_BIOS (3)
-#define MGMT_FLASHROM_OPTYPE_CODE_CTRLS (4)
-#define MGMT_FLASHROM_OPTYPE_CFG_IPSEC  (5)
-#define MGMT_FLASHROM_OPTYPE_CFG_INI    (6)
-#define MGMT_FLASHROM_OPTYPE_ROM_OFFSET_SPECIFIED (7)
-
-/*
- * --- FLASHROM_TYPE ---
- * Flash ROM manufacturers supported in the f/w
- */
-#define INTEL                           (0)
-#define SPANSION                        (1)
-#define MICRON                          (2)
-
-/* --- DDR_CAS_TYPE --- */
-#define CAS_3                           (0)
-#define CAS_4                           (1)
-#define CAS_5                           (2)
-
-/* --- DDR_SIZE_TYPE --- */
-#define SIZE_256MB                      (0)
-#define SIZE_512MB                      (1)
-
-/* --- DDR_MODE_TYPE --- */
-#define DDR_NO_ECC                      (0)
-#define DDR_ECC                         (1)
-
-/* --- INTERFACE_10GB_TYPE --- */
-#define CX4_TYPE                        (0)
-#define XFP_TYPE                        (1)
-
-/* --- BE_CHIP_MAX_MTU --- */
-#define CHIP_MAX_MTU                    (9000)
-
-/* --- XAUI_STATE_ENUM --- */
-#define XAUI_STATE_ENABLE               (0)	/* This MUST be the default
-						   value for all requests
-						   which set/change
-						   equalization parameter.  */
-#define XAUI_STATE_DISABLE              (255)	/* The XAUI for both ports
-						   may be disabled for EMI
-						   tests. There is no
-						   provision for turning off
-						   individual ports.
-						   */
-/* --- BE_ASIC_REVISION --- */
-#define BE_ASIC_REV_A0                  (1)
-#define BE_ASIC_REV_A1                  (2)
-
-#endif /* __fwcmd_common_amap_h__ */
diff --git a/drivers/staging/benet/fwcmd_common_bmap.h b/drivers/staging/benet/fwcmd_common_bmap.h
deleted file mode 100644
index a007cf27650..00000000000
--- a/drivers/staging/benet/fwcmd_common_bmap.h
+++ /dev/null
@@ -1,717 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_common_bmap_h__
-#define __fwcmd_common_bmap_h__
-#include "fwcmd_types_bmap.h"
-#include "fwcmd_hdr_bmap.h"
-
-#if defined(__BIG_ENDIAN)
-   /* Physical Address. */
-struct PHYS_ADDR {
-	union {
-		struct {
-			u32 lo;	/* DWORD 0 */
-			u32 hi;	/* DWORD 1 */
-		} __packed;	/* unnamed struct */
-		u32 dw[2];	/* dword union */
-	};			/* unnamed union */
-} __packed ;
-
-
-#else
-   /* Physical Address. */
-struct PHYS_ADDR {
-	union {
-		struct {
-			u32 lo;	/* DWORD 0 */
-			u32 hi;	/* DWORD 1 */
-		} __packed;	/* unnamed struct */
-		u32 dw[2];	/* dword union */
-	};			/* unnamed union */
-} __packed ;
-
-struct BE_LINK_STATUS {
-	u8 mac0_duplex;
-	u8 mac0_speed;
-	u8 mac1_duplex;
-	u8 mac1_speed;
-	u8 mgmt_mac_duplex;
-	u8 mgmt_mac_speed;
-	u8 active_port;
-	u8 rsvd0;
-	u8 mac0_fault;
-	u8 mac1_fault;
-	u16 rsvd1;
-} __packed;
-#endif
-
-struct FWCMD_COMMON_ANON_170_REQUEST {
-	u32 rsvd0;
-} __packed;
-
-union LINK_STATUS_QUERY_PARAMS {
-	struct BE_LINK_STATUS response;
-	struct FWCMD_COMMON_ANON_170_REQUEST request;
-} __packed;
-
-/*
- *  Queries the the link status for all ports.  The valid values below
- *  DO NOT indicate that  a particular duplex or speed is supported by
- *  BladeEngine. These enumerations simply  list all possible duplexes
- *  and speeds for any port. Consult BladeEngine product  documentation
- *  for the supported parameters.
- */
-struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY {
-	union FWCMD_HEADER header;
-	union LINK_STATUS_QUERY_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_171_REQUEST {
-	u8 type;
-	u8 port;
-	u8 mac1;
-	u8 permanent;
-} __packed;
-
-struct FWCMD_COMMON_ANON_172_RESPONSE {
-	struct MAC_ADDRESS_FORMAT mac;
-} __packed;
-
-union NTWK_MAC_QUERY_PARAMS {
-	struct FWCMD_COMMON_ANON_171_REQUEST request;
-	struct FWCMD_COMMON_ANON_172_RESPONSE response;
-} __packed;
-
-/* Queries one MAC address.  */
-struct FWCMD_COMMON_NTWK_MAC_QUERY {
-	union FWCMD_HEADER header;
-	union NTWK_MAC_QUERY_PARAMS params;
-} __packed;
-
-struct MAC_SET_PARAMS_IN {
-	u8 type;
-	u8 port;
-	u8 mac1;
-	u8 invalidate;
-	struct MAC_ADDRESS_FORMAT mac;
-} __packed;
-
-struct MAC_SET_PARAMS_OUT {
-	u32 rsvd0;
-} __packed;
-
-union MAC_SET_PARAMS {
-	struct MAC_SET_PARAMS_IN request;
-	struct MAC_SET_PARAMS_OUT response;
-} __packed;
-
-/* Sets a MAC address.  */
-struct FWCMD_COMMON_NTWK_MAC_SET {
-	union FWCMD_HEADER header;
-	union MAC_SET_PARAMS params;
-} __packed;
-
-/* MAC address list. */
-struct NTWK_MULTICAST_MAC_LIST {
-	u8 byte[6];
-} __packed;
-
-struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD {
-	u16 num_mac;
-	u8 promiscuous;
-	u8 rsvd0;
-	struct NTWK_MULTICAST_MAC_LIST mac[32];
-} __packed;
-
-struct FWCMD_COMMON_ANON_174_RESPONSE {
-	u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_173_PARAMS {
-	struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD request;
-	struct FWCMD_COMMON_ANON_174_RESPONSE response;
-} __packed;
-
-/*
- *  Sets multicast address hash. The MPU will merge the MAC address lists
- *  from all clients,  including the networking and storage functions.
- *  This command may fail if the final merged  list of MAC addresses exceeds
- *  32 entries.
- */
-struct FWCMD_COMMON_NTWK_MULTICAST_SET {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_173_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD {
-	u16 num_vlan;
-	u8 promiscuous;
-	u8 rsvd0;
-	u16 vlan_tag[32];
-} __packed;
-
-struct FWCMD_COMMON_ANON_176_RESPONSE {
-	u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_175_PARAMS {
-	struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD request;
-	struct FWCMD_COMMON_ANON_176_RESPONSE response;
-} __packed;
-
-/*
- *  Sets VLAN tag filter. The MPU will merge the VLAN tag list from all
- *  clients, including  the networking and storage functions. This command
- *  may fail if the final vlan_tag array  (from all functions) is longer
- *  than 32 entries.
- */
-struct FWCMD_COMMON_NTWK_VLAN_CONFIG {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_175_PARAMS params;
-} __packed;
-
-struct RING_DESTROY_REQUEST {
-	u16 ring_type;
-	u16 id;
-	u8 bypass_flush;
-	u8 rsvd0;
-	u16 rsvd1;
-} __packed;
-
-struct FWCMD_COMMON_ANON_190_RESPONSE {
-	u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_189_PARAMS {
-	struct RING_DESTROY_REQUEST request;
-	struct FWCMD_COMMON_ANON_190_RESPONSE response;
-} __packed;
-/*
- *  Command for destroying any ring. The connection(s) using the ring should
- *  be quiesced  before destroying the ring.
- */
-struct FWCMD_COMMON_RING_DESTROY {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_189_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_192_REQUEST {
-	u16 num_pages;
-	u16 rsvd0;
-	struct CQ_CONTEXT_AMAP context;
-	struct PHYS_ADDR pages[4];
-} __packed ;
-
-struct FWCMD_COMMON_ANON_193_RESPONSE {
-	u16 cq_id;
-} __packed ;
-
-union FWCMD_COMMON_ANON_191_PARAMS {
-	struct FWCMD_COMMON_ANON_192_REQUEST request;
-	struct FWCMD_COMMON_ANON_193_RESPONSE response;
-} __packed ;
-
-/*
- *  Command for creating a completion queue. A Completion Queue must span
- *  at least 1 page and  at most 4 pages. Each completion queue entry
- *  is 16 bytes regardless of CQ entry format.  Thus the ring must be
- *  at least 256 entries deep (corresponding to 1 page) and can be at
- *   most 1024 entries deep (corresponding to 4 pages). The number of
- *  pages posted must  contain the CQ ring size as encoded in the context.
- *
- */
-struct FWCMD_COMMON_CQ_CREATE {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_191_PARAMS params;
-} __packed ;
-
-struct FWCMD_COMMON_ANON_198_REQUEST {
-	u16 num_pages;
-	u16 rsvd0;
-	struct EQ_CONTEXT_AMAP context;
-	struct PHYS_ADDR pages[8];
-} __packed ;
-
-struct FWCMD_COMMON_ANON_199_RESPONSE {
-	u16 eq_id;
-} __packed ;
-
-union FWCMD_COMMON_ANON_197_PARAMS {
-	struct FWCMD_COMMON_ANON_198_REQUEST request;
-	struct FWCMD_COMMON_ANON_199_RESPONSE response;
-} __packed ;
-
-/*
- *  Command for creating a event queue. An Event Queue must span at least
- *  1 page and at most  8 pages. The number of pages posted must contain
- *  the EQ ring. The ring is defined by  the size of the EQ entries (encoded
- *  in the context) and the number of EQ entries (also  encoded in the
- *  context).
- */
-struct FWCMD_COMMON_EQ_CREATE {
-	union  FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_197_PARAMS params;
-} __packed ;
-
-struct FWCMD_COMMON_ANON_201_REQUEST {
-	u16 cq_id;
-	u16 bcmc_cq_id;
-	u16 num_pages;
-	u16 rsvd0;
-	struct PHYS_ADDR pages[2];
-} __packed;
-
-struct FWCMD_COMMON_ANON_202_RESPONSE {
-	u16 id;
-} __packed;
-
-union FWCMD_COMMON_ANON_200_PARAMS {
-	struct FWCMD_COMMON_ANON_201_REQUEST request;
-	struct FWCMD_COMMON_ANON_202_RESPONSE response;
-} __packed;
-
-/*
- *  Command for creating Ethernet receive ring.  An ERX ring contains ETH_RX_D
- *  entries (8  bytes each). An ERX ring must be 1024 entries deep
- *  (corresponding to 2 pages).
- */
-struct FWCMD_COMMON_ETH_RX_CREATE {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_200_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_204_REQUEST {
-	u16 num_pages;
-	u8 ulp_num;
-	u8 type;
-	struct ETX_CONTEXT_AMAP context;
-	struct PHYS_ADDR pages[8];
-} __packed ;
-
-struct FWCMD_COMMON_ANON_205_RESPONSE {
-	u16 cid;
-	u8 ulp_num;
-	u8 rsvd0;
-} __packed ;
-
-union FWCMD_COMMON_ANON_203_PARAMS {
-	struct FWCMD_COMMON_ANON_204_REQUEST request;
-	struct FWCMD_COMMON_ANON_205_RESPONSE response;
-} __packed ;
-
-/*
- *  Command for creating an Ethernet transmit ring.  An ETX ring contains
- *  ETH_WRB entries (16  bytes each). An ETX ring must be at least 256
- *  entries deep (corresponding to 1 page)  and at most 2k entries deep
- *  (corresponding to 8 pages).
- */
-struct FWCMD_COMMON_ETH_TX_CREATE {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_203_PARAMS params;
-} __packed ;
-
-struct FWCMD_COMMON_ANON_222_REQUEST {
-	u16 num_pages;
-	u16 rsvd0;
-	struct MCC_RING_CONTEXT_AMAP context;
-	struct PHYS_ADDR pages[8];
-} __packed ;
-
-struct FWCMD_COMMON_ANON_223_RESPONSE {
-	u16 id;
-} __packed ;
-
-union FWCMD_COMMON_ANON_221_PARAMS {
-	struct FWCMD_COMMON_ANON_222_REQUEST request;
-	struct FWCMD_COMMON_ANON_223_RESPONSE response;
-} __packed ;
-
-/*
- *  Command for creating the MCC ring. An MCC ring must be at least 16
- *  entries deep  (corresponding to 1 page) and at most 128 entries deep
- *  (corresponding to 8 pages).
- */
-struct FWCMD_COMMON_MCC_CREATE {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_221_PARAMS params;
-} __packed ;
-
-struct GET_QOS_IN {
-	u32 qos_params_rsvd;
-} __packed;
-
-struct GET_QOS_OUT {
-	u32 max_bits_per_second_NIC;
-	u32 max_packets_per_second_NIC;
-	u32 max_ios_per_second_iSCSI;
-	u32 max_bytes_per_second_iSCSI;
-	u16 domain_VLAN_tag;
-	u16 fabric_domain_ID;
-	u32 qos_params_oem[4];
-} __packed;
-
-union GET_QOS_PARAMS {
-	struct GET_QOS_IN request;
-	struct GET_QOS_OUT response;
-} __packed;
-
-/* QOS/Bandwidth settings per domain. Applicable only in VMs.  */
-struct FWCMD_COMMON_GET_QOS {
-	union FWCMD_HEADER header;
-	union GET_QOS_PARAMS params;
-} __packed;
-
-struct SET_QOS_IN {
-	u32 valid_flags;
-	u32 max_bits_per_second_NIC;
-	u32 max_packets_per_second_NIC;
-	u32 max_ios_per_second_iSCSI;
-	u32 max_bytes_per_second_iSCSI;
-	u16 domain_VLAN_tag;
-	u16 fabric_domain_ID;
-	u32 qos_params_oem[4];
-} __packed;
-
-struct SET_QOS_OUT {
-	u32 qos_params_rsvd;
-} __packed;
-
-union SET_QOS_PARAMS {
-	struct SET_QOS_IN request;
-	struct SET_QOS_OUT response;
-} __packed;
-
-/* QOS/Bandwidth settings per domain. Applicable only in VMs.  */
-struct FWCMD_COMMON_SET_QOS {
-	union FWCMD_HEADER header;
-	union SET_QOS_PARAMS params;
-} __packed;
-
-struct SET_FRAME_SIZE_IN {
-	u32 max_tx_frame_size;
-	u32 max_rx_frame_size;
-} __packed;
-
-struct SET_FRAME_SIZE_OUT {
-	u32 chip_max_tx_frame_size;
-	u32 chip_max_rx_frame_size;
-} __packed;
-
-union SET_FRAME_SIZE_PARAMS {
-	struct SET_FRAME_SIZE_IN request;
-	struct SET_FRAME_SIZE_OUT response;
-} __packed;
-
-/* Set frame size command. Only host domain may issue this command.  */
-struct FWCMD_COMMON_SET_FRAME_SIZE {
-	union FWCMD_HEADER header;
-	union SET_FRAME_SIZE_PARAMS params;
-} __packed;
-
-struct FORCE_FAILOVER_IN {
-	u32 move_to_port;
-	u32 failover_config;
-} __packed;
-
-struct FWCMD_COMMON_ANON_231_RESPONSE {
-	u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_230_PARAMS {
-	struct FORCE_FAILOVER_IN request;
-	struct FWCMD_COMMON_ANON_231_RESPONSE response;
-} __packed;
-
-/*
- *  Use this command to control failover in BladeEngine. It may be used
- *  to failback to a  restored port or to forcibly move traffic from
- *  one port to another. It may also be used  to enable or disable the
- *  automatic failover feature. This command can only be issued by  domain
- *  0.
- */
-struct FWCMD_COMMON_FORCE_FAILOVER {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_230_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_240_REQUEST {
-	u64 context;
-} __packed;
-
-struct FWCMD_COMMON_ANON_241_RESPONSE {
-	u64 context;
-} __packed;
-
-union FWCMD_COMMON_ANON_239_PARAMS {
-	struct FWCMD_COMMON_ANON_240_REQUEST request;
-	struct FWCMD_COMMON_ANON_241_RESPONSE response;
-} __packed;
-
-/*
- *  This command can be used by clients as a no-operation request. Typical
- *  uses for drivers  are as a heartbeat mechanism, or deferred processing
- *  catalyst. The ARM will always  complete this command with a good completion.
- *  The 64-bit parameter is not touched by the  ARM processor.
- */
-struct FWCMD_COMMON_NOP {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_239_PARAMS params;
-} __packed;
-
-struct NTWK_RX_FILTER_SETTINGS {
-	u8 promiscuous;
-	u8 ip_cksum;
-	u8 tcp_cksum;
-	u8 udp_cksum;
-	u8 pass_err;
-	u8 pass_ckerr;
-	u8 strip_crc;
-	u8 mcast_en;
-	u8 bcast_en;
-	u8 mcast_promiscuous_en;
-	u8 unicast_en;
-	u8 vlan_promiscuous;
-} __packed;
-
-union FWCMD_COMMON_ANON_242_PARAMS {
-	struct NTWK_RX_FILTER_SETTINGS request;
-	struct NTWK_RX_FILTER_SETTINGS response;
-} __packed;
-
-/*
- *  This command is used to modify the ethernet receive filter configuration.
- *  Only domain 0  network function drivers may issue this command. The
- *  applied configuration is returned in  the response payload. Note:
- *  Some receive packet filter settings are global on  BladeEngine and
- *  can affect both the storage and network function clients that the
- *   BladeEngine hardware and firmware serve. Additionaly, depending
- *  on the revision of  BladeEngine, some ethernet receive filter settings
- *  are dependent on others. If a  dependency exists between settings
- *  for the BladeEngine revision, and the command request  settings do
- *  not meet the dependency requirement, the invalid settings will not
- *  be  applied despite the comand succeeding. For example: a driver may
- *  request to enable  broadcast packets, but not enable multicast packets.
- *  On early revisions of BladeEngine,  there may be no distinction between
- *  broadcast and multicast filters, so broadcast could  not be enabled
- *  without enabling multicast. In this scenario, the comand would still
- *   succeed, but the response payload would indicate the previously
- *  configured broadcast  and multicast setting.
- */
-struct FWCMD_COMMON_NTWK_RX_FILTER {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_242_PARAMS params;
-} __packed;
-
-
-struct FWCMD_COMMON_ANON_244_REQUEST {
-	u32 rsvd0;
-} __packed;
-
-struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD {
-	u8 firmware_version_string[32];
-	u8 fw_on_flash_version_string[32];
-} __packed;
-
-union FWCMD_COMMON_ANON_243_PARAMS {
-	struct FWCMD_COMMON_ANON_244_REQUEST request;
-	struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD response;
-} __packed;
-
-/* This comand retrieves the firmware version.  */
-struct FWCMD_COMMON_GET_FW_VERSION {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_243_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_246_REQUEST {
-	u16 tx_flow_control;
-	u16 rx_flow_control;
-} __packed;
-
-struct FWCMD_COMMON_ANON_247_RESPONSE {
-	u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_245_PARAMS {
-	struct FWCMD_COMMON_ANON_246_REQUEST request;
-	struct FWCMD_COMMON_ANON_247_RESPONSE response;
-} __packed;
-
-/*
- *  This comand is used to program BladeEngine flow control behavior.
- *  Only the host  networking driver is allowed to use this comand.
- */
-struct FWCMD_COMMON_SET_FLOW_CONTROL {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_245_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_249_REQUEST {
-	u32 rsvd0;
-} __packed;
-
-struct FWCMD_COMMON_ANON_250_RESPONSE {
-	u16 tx_flow_control;
-	u16 rx_flow_control;
-} __packed;
-
-union FWCMD_COMMON_ANON_248_PARAMS {
-	struct FWCMD_COMMON_ANON_249_REQUEST request;
-	struct FWCMD_COMMON_ANON_250_RESPONSE response;
-} __packed;
-
-/* This comand is used to read BladeEngine flow control settings.  */
-struct FWCMD_COMMON_GET_FLOW_CONTROL {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_248_PARAMS params;
-} __packed;
-
-struct EQ_DELAY_PARAMS {
-	u32 eq_id;
-	u32 delay_in_microseconds;
-} __packed;
-
-struct FWCMD_COMMON_ANON_257_REQUEST {
-	u32 num_eq;
-	u32 rsvd0;
-	struct EQ_DELAY_PARAMS delay[16];
-} __packed;
-
-struct FWCMD_COMMON_ANON_258_RESPONSE {
-	u32 delay_resolution_in_microseconds;
-	u32 delay_max_in_microseconds;
-} __packed;
-
-union MODIFY_EQ_DELAY_PARAMS {
-	struct FWCMD_COMMON_ANON_257_REQUEST request;
-	struct FWCMD_COMMON_ANON_258_RESPONSE response;
-} __packed;
-
-/* This comand changes the EQ delay for a given set of EQs.  */
-struct FWCMD_COMMON_MODIFY_EQ_DELAY {
-	union FWCMD_HEADER header;
-	union MODIFY_EQ_DELAY_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_260_REQUEST {
-	u32 rsvd0;
-} __packed;
-
-struct BE_FIRMWARE_CONFIG {
-	u16 be_config_number;
-	u16 asic_revision;
-	u32 nic_ulp_mask;
-	u32 tulp_mask;
-	u32 iscsi_ulp_mask;
-	u32 rdma_ulp_mask;
-	u32 rsvd0[4];
-	u32 eth_tx_id_start;
-	u32 eth_tx_id_count;
-	u32 eth_rx_id_start;
-	u32 eth_rx_id_count;
-	u32 tpm_wrbq_id_start;
-	u32 tpm_wrbq_id_count;
-	u32 tpm_defq_id_start;
-	u32 tpm_defq_id_count;
-	u32 iscsi_wrbq_id_start;
-	u32 iscsi_wrbq_id_count;
-	u32 iscsi_defq_id_start;
-	u32 iscsi_defq_id_count;
-	u32 rdma_qp_id_start;
-	u32 rdma_qp_id_count;
-	u32 rsvd1[8];
-} __packed;
-
-union FWCMD_COMMON_ANON_259_PARAMS {
-	struct FWCMD_COMMON_ANON_260_REQUEST request;
-	struct BE_FIRMWARE_CONFIG response;
-} __packed;
-
-/*
- *  This comand queries the current firmware configuration parameters.
- *   The static  configuration type is defined by be_config_number. This
- *  differentiates different  BladeEngine builds, such as iSCSI Initiator
- *  versus iSCSI Target.  For a given static  configuration, the Upper
- *  Layer Protocol (ULP) processors may be reconfigured to support  different
- *  protocols. Each ULP processor supports one or more protocols. The
- *  masks  indicate which processors are configured for each protocol.
- *   For a given static  configuration, the number of TCP connections
- *  supported for each protocol may vary. The  *_id_start and *_id_count
- *  variables define a linear range of IDs that are available for  each
- *  supported protocol. The *_id_count may be used by the driver to allocate
- *  the  appropriate number of connection resources. The *_id_start may
- *  be used to map the  arbitrary range of IDs to a zero-based range
- *  of indices.
- */
-struct FWCMD_COMMON_FIRMWARE_CONFIG {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_259_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS {
-	u32 emph_lev_sel_port0;
-	u32 emph_lev_sel_port1;
-	u8 xaui_vo_sel;
-	u8 xaui_state;
-	u16 rsvd0;
-	u32 xaui_eq_vector;
-} __packed;
-
-struct FWCMD_COMMON_ANON_262_REQUEST {
-	u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_261_PARAMS {
-	struct FWCMD_COMMON_ANON_262_REQUEST request;
-	struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS response;
-} __packed;
-
-/*
- *  This comand can be used to read XAUI equalization parameters. The
- *  ARM firmware applies  default equalization parameters during initialization.
- *  These parameters may be  customer-specific when derived from the
- *  SEEPROM. See SEEPROM_DATA for equalization  specific fields.
- */
-struct FWCMD_COMMON_GET_PORT_EQUALIZATION {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_261_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_264_RESPONSE {
-	u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_263_PARAMS {
-	struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS request;
-	struct FWCMD_COMMON_ANON_264_RESPONSE response;
-} __packed;
-
-/*
- *  This comand can be used to set XAUI equalization parameters. The ARM
- *  firmware applies  default equalization parameters during initialization.
- *  These parameters may be  customer-specific when derived from the
- *  SEEPROM. See SEEPROM_DATA for equalization  specific fields.
- */
-struct FWCMD_COMMON_SET_PORT_EQUALIZATION {
-	union FWCMD_HEADER header;
-	union FWCMD_COMMON_ANON_263_PARAMS params;
-} __packed;
-
-#endif /* __fwcmd_common_bmap_h__ */
diff --git a/drivers/staging/benet/fwcmd_eth_bmap.h b/drivers/staging/benet/fwcmd_eth_bmap.h
deleted file mode 100644
index 234b179eace..00000000000
--- a/drivers/staging/benet/fwcmd_eth_bmap.h
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_eth_bmap_h__
-#define __fwcmd_eth_bmap_h__
-#include "fwcmd_hdr_bmap.h"
-#include "fwcmd_types_bmap.h"
-
-struct MIB_ETH_STATISTICS_PARAMS_IN {
-	u32 rsvd0;
-} __packed;
-
-struct BE_RXF_STATS {
-	u32 p0recvdtotalbytesLSD;	/* DWORD 0 */
-	u32 p0recvdtotalbytesMSD;	/* DWORD 1 */
-	u32 p0recvdtotalframes;	/* DWORD 2 */
-	u32 p0recvdunicastframes;	/* DWORD 3 */
-	u32 p0recvdmulticastframes;	/* DWORD 4 */
-	u32 p0recvdbroadcastframes;	/* DWORD 5 */
-	u32 p0crcerrors;	/* DWORD 6 */
-	u32 p0alignmentsymerrs;	/* DWORD 7 */
-	u32 p0pauseframesrecvd;	/* DWORD 8 */
-	u32 p0controlframesrecvd;	/* DWORD 9 */
-	u32 p0inrangelenerrors;	/* DWORD 10 */
-	u32 p0outrangeerrors;	/* DWORD 11 */
-	u32 p0frametoolongerrors;	/* DWORD 12 */
-	u32 p0droppedaddressmatch;	/* DWORD 13 */
-	u32 p0droppedvlanmismatch;	/* DWORD 14 */
-	u32 p0ipdroppedtoosmall;	/* DWORD 15 */
-	u32 p0ipdroppedtooshort;	/* DWORD 16 */
-	u32 p0ipdroppedhdrtoosmall;	/* DWORD 17 */
-	u32 p0tcpdroppedlen;	/* DWORD 18 */
-	u32 p0droppedrunt;	/* DWORD 19 */
-	u32 p0recvd64;		/* DWORD 20 */
-	u32 p0recvd65_127;	/* DWORD 21 */
-	u32 p0recvd128_256;	/* DWORD 22 */
-	u32 p0recvd256_511;	/* DWORD 23 */
-	u32 p0recvd512_1023;	/* DWORD 24 */
-	u32 p0recvd1518_1522;	/* DWORD 25 */
-	u32 p0recvd1522_2047;	/* DWORD 26 */
-	u32 p0recvd2048_4095;	/* DWORD 27 */
-	u32 p0recvd4096_8191;	/* DWORD 28 */
-	u32 p0recvd8192_9216;	/* DWORD 29 */
-	u32 p0rcvdipcksmerrs;	/* DWORD 30 */
-	u32 p0recvdtcpcksmerrs;	/* DWORD 31 */
-	u32 p0recvdudpcksmerrs;	/* DWORD 32 */
-	u32 p0recvdnonrsspackets;	/* DWORD 33 */
-	u32 p0recvdippackets;	/* DWORD 34 */
-	u32 p0recvdchute1packets;	/* DWORD 35 */
-	u32 p0recvdchute2packets;	/* DWORD 36 */
-	u32 p0recvdchute3packets;	/* DWORD 37 */
-	u32 p0recvdipsecpackets;	/* DWORD 38 */
-	u32 p0recvdmanagementpackets;	/* DWORD 39 */
-	u32 p0xmitbyteslsd;	/* DWORD 40 */
-	u32 p0xmitbytesmsd;	/* DWORD 41 */
-	u32 p0xmitunicastframes;	/* DWORD 42 */
-	u32 p0xmitmulticastframes;	/* DWORD 43 */
-	u32 p0xmitbroadcastframes;	/* DWORD 44 */
-	u32 p0xmitpauseframes;	/* DWORD 45 */
-	u32 p0xmitcontrolframes;	/* DWORD 46 */
-	u32 p0xmit64;		/* DWORD 47 */
-	u32 p0xmit65_127;	/* DWORD 48 */
-	u32 p0xmit128_256;	/* DWORD 49 */
-	u32 p0xmit256_511;	/* DWORD 50 */
-	u32 p0xmit512_1023;	/* DWORD 51 */
-	u32 p0xmit1518_1522;	/* DWORD 52 */
-	u32 p0xmit1522_2047;	/* DWORD 53 */
-	u32 p0xmit2048_4095;	/* DWORD 54 */
-	u32 p0xmit4096_8191;	/* DWORD 55 */
-	u32 p0xmit8192_9216;	/* DWORD 56 */
-	u32 p0rxfifooverflowdropped;	/* DWORD 57 */
-	u32 p0ipseclookupfaileddropped;	/* DWORD 58 */
-	u32 p1recvdtotalbytesLSD;	/* DWORD 59 */
-	u32 p1recvdtotalbytesMSD;	/* DWORD 60 */
-	u32 p1recvdtotalframes;	/* DWORD 61 */
-	u32 p1recvdunicastframes;	/* DWORD 62 */
-	u32 p1recvdmulticastframes;	/* DWORD 63 */
-	u32 p1recvdbroadcastframes;	/* DWORD 64 */
-	u32 p1crcerrors;	/* DWORD 65 */
-	u32 p1alignmentsymerrs;	/* DWORD 66 */
-	u32 p1pauseframesrecvd;	/* DWORD 67 */
-	u32 p1controlframesrecvd;	/* DWORD 68 */
-	u32 p1inrangelenerrors;	/* DWORD 69 */
-	u32 p1outrangeerrors;	/* DWORD 70 */
-	u32 p1frametoolongerrors;	/* DWORD 71 */
-	u32 p1droppedaddressmatch;	/* DWORD 72 */
-	u32 p1droppedvlanmismatch;	/* DWORD 73 */
-	u32 p1ipdroppedtoosmall;	/* DWORD 74 */
-	u32 p1ipdroppedtooshort;	/* DWORD 75 */
-	u32 p1ipdroppedhdrtoosmall;	/* DWORD 76 */
-	u32 p1tcpdroppedlen;	/* DWORD 77 */
-	u32 p1droppedrunt;	/* DWORD 78 */
-	u32 p1recvd64;		/* DWORD 79 */
-	u32 p1recvd65_127;	/* DWORD 80 */
-	u32 p1recvd128_256;	/* DWORD 81 */
-	u32 p1recvd256_511;	/* DWORD 82 */
-	u32 p1recvd512_1023;	/* DWORD 83 */
-	u32 p1recvd1518_1522;	/* DWORD 84 */
-	u32 p1recvd1522_2047;	/* DWORD 85 */
-	u32 p1recvd2048_4095;	/* DWORD 86 */
-	u32 p1recvd4096_8191;	/* DWORD 87 */
-	u32 p1recvd8192_9216;	/* DWORD 88 */
-	u32 p1rcvdipcksmerrs;	/* DWORD 89 */
-	u32 p1recvdtcpcksmerrs;	/* DWORD 90 */
-	u32 p1recvdudpcksmerrs;	/* DWORD 91 */
-	u32 p1recvdnonrsspackets;	/* DWORD 92 */
-	u32 p1recvdippackets;	/* DWORD 93 */
-	u32 p1recvdchute1packets;	/* DWORD 94 */
-	u32 p1recvdchute2packets;	/* DWORD 95 */
-	u32 p1recvdchute3packets;	/* DWORD 96 */
-	u32 p1recvdipsecpackets;	/* DWORD 97 */
-	u32 p1recvdmanagementpackets;	/* DWORD 98 */
-	u32 p1xmitbyteslsd;	/* DWORD 99 */
-	u32 p1xmitbytesmsd;	/* DWORD 100 */
-	u32 p1xmitunicastframes;	/* DWORD 101 */
-	u32 p1xmitmulticastframes;	/* DWORD 102 */
-	u32 p1xmitbroadcastframes;	/* DWORD 103 */
-	u32 p1xmitpauseframes;	/* DWORD 104 */
-	u32 p1xmitcontrolframes;	/* DWORD 105 */
-	u32 p1xmit64;		/* DWORD 106 */
-	u32 p1xmit65_127;	/* DWORD 107 */
-	u32 p1xmit128_256;	/* DWORD 108 */
-	u32 p1xmit256_511;	/* DWORD 109 */
-	u32 p1xmit512_1023;	/* DWORD 110 */
-	u32 p1xmit1518_1522;	/* DWORD 111 */
-	u32 p1xmit1522_2047;	/* DWORD 112 */
-	u32 p1xmit2048_4095;	/* DWORD 113 */
-	u32 p1xmit4096_8191;	/* DWORD 114 */
-	u32 p1xmit8192_9216;	/* DWORD 115 */
-	u32 p1rxfifooverflowdropped;	/* DWORD 116 */
-	u32 p1ipseclookupfaileddropped;	/* DWORD 117 */
-	u32 pxdroppednopbuf;	/* DWORD 118 */
-	u32 pxdroppednotxpb;	/* DWORD 119 */
-	u32 pxdroppednoipsecbuf;	/* DWORD 120 */
-	u32 pxdroppednoerxdescr;	/* DWORD 121 */
-	u32 pxdroppednotpredescr;	/* DWORD 122 */
-	u32 pxrecvdmanagementportpackets;	/* DWORD 123 */
-	u32 pxrecvdmanagementportbytes;	/* DWORD 124 */
-	u32 pxrecvdmanagementportpauseframes;	/* DWORD 125 */
-	u32 pxrecvdmanagementporterrors;	/* DWORD 126 */
-	u32 pxxmitmanagementportpackets;	/* DWORD 127 */
-	u32 pxxmitmanagementportbytes;	/* DWORD 128 */
-	u32 pxxmitmanagementportpause;	/* DWORD 129 */
-	u32 pxxmitmanagementportrxfifooverflow;	/* DWORD 130 */
-	u32 pxrecvdipsecipcksmerrs;	/* DWORD 131 */
-	u32 pxrecvdtcpsecipcksmerrs;	/* DWORD 132 */
-	u32 pxrecvdudpsecipcksmerrs;	/* DWORD 133 */
-	u32 pxipsecrunt;	/* DWORD 134 */
-	u32 pxipsecaddressmismatchdropped;	/* DWORD 135 */
-	u32 pxipsecrxfifooverflowdropped;	/* DWORD 136 */
-	u32 pxipsecframestoolong;	/* DWORD 137 */
-	u32 pxipsectotalipframes;	/* DWORD 138 */
-	u32 pxipseciptoosmall;	/* DWORD 139 */
-	u32 pxipseciptooshort;	/* DWORD 140 */
-	u32 pxipseciphdrtoosmall;	/* DWORD 141 */
-	u32 pxipsectcphdrbad;	/* DWORD 142 */
-	u32 pxrecvdipsecchute1;	/* DWORD 143 */
-	u32 pxrecvdipsecchute2;	/* DWORD 144 */
-	u32 pxrecvdipsecchute3;	/* DWORD 145 */
-	u32 pxdropped7frags;	/* DWORD 146 */
-	u32 pxdroppedfrags;	/* DWORD 147 */
-	u32 pxdroppedinvalidfragring;	/* DWORD 148 */
-	u32 pxnumforwardedpackets;	/* DWORD 149 */
-} __packed;
-
-union MIB_ETH_STATISTICS_PARAMS {
-	struct MIB_ETH_STATISTICS_PARAMS_IN request;
-	struct BE_RXF_STATS response;
-} __packed;
-
-/*
- *  Query ethernet statistics. All domains may issue this command. The
- *  host domain drivers  may optionally reset internal statistic counters
- *  with a query.
- */
-struct FWCMD_ETH_GET_STATISTICS {
-	union FWCMD_HEADER header;
-	union MIB_ETH_STATISTICS_PARAMS params;
-} __packed;
-
-
-struct FWCMD_ETH_ANON_175_REQUEST {
-	u8 port0_promiscuous;
-	u8 port1_promiscuous;
-	u16 rsvd0;
-} __packed;
-
-struct FWCMD_ETH_ANON_176_RESPONSE {
-	u32 rsvd0;
-} __packed;
-
-union FWCMD_ETH_ANON_174_PARAMS {
-	struct FWCMD_ETH_ANON_175_REQUEST request;
-	struct FWCMD_ETH_ANON_176_RESPONSE response;
-} __packed;
-
-/* Enables/Disables promiscuous ethernet receive mode.  */
-struct FWCMD_ETH_PROMISCUOUS {
-	union FWCMD_HEADER header;
-	union FWCMD_ETH_ANON_174_PARAMS params;
-} __packed;
-
-struct FWCMD_ETH_ANON_178_REQUEST {
-	u32 new_fragsize_log2;
-} __packed;
-
-struct FWCMD_ETH_ANON_179_RESPONSE {
-	u32 actual_fragsize_log2;
-} __packed;
-
-union FWCMD_ETH_ANON_177_PARAMS {
-	struct FWCMD_ETH_ANON_178_REQUEST request;
-	struct FWCMD_ETH_ANON_179_RESPONSE response;
-} __packed;
-
-/*
- *  Sets the Ethernet RX fragment size. Only host (domain 0) networking
- *  drivers may issue  this command.  This call will fail for non-host
- *  protection domains. In this situation the  MCC CQ status will indicate
- *  a failure due to insufficient priviledges. The response  should be
- *  ignored, and the driver should use the FWCMD_ETH_GET_FRAG_SIZE to
- *  query the  existing ethernet receive fragment size. It must use this
- *  fragment size for all  fragments in the ethernet receive ring.  If
- *  the command succeeds, the driver must use the  frag size indicated
- *  in the command response since the requested frag size may not be  applied
- *  until the next reboot. When the requested fragsize matches the response
- *   fragsize, this indicates the request was applied immediately.
- */
-struct FWCMD_ETH_SET_RX_FRAG_SIZE {
-	union FWCMD_HEADER header;
-	union FWCMD_ETH_ANON_177_PARAMS params;
-} __packed;
-
-struct FWCMD_ETH_ANON_181_REQUEST {
-	u32 rsvd0;
-} __packed;
-
-struct FWCMD_ETH_ANON_182_RESPONSE {
-	u32 actual_fragsize_log2;
-} __packed;
-
-union FWCMD_ETH_ANON_180_PARAMS {
-	struct FWCMD_ETH_ANON_181_REQUEST request;
-	struct FWCMD_ETH_ANON_182_RESPONSE response;
-} __packed;
-
-/*
- *  Queries the Ethernet RX fragment size. All domains may issue this
- *  command.  The driver  should call this command to determine the minimum
- *  required fragment size for the ethernet  RX ring buffers. Drivers
- *  may choose to use a larger size for each fragment buffer, but  BladeEngine
- *  will use up to the configured minimum required fragsize in each ethernet
- *   receive fragment buffer. For example, if the ethernet receive fragment
- *  size is  configured to 4kB, and a driver uses 8kB fragments, a 6kB
- *  ethernet packet received by  BladeEngine will be split accross two
- *  of the driver's receive framgents (4kB in one  fragment buffer, and
- *  2kB in the subsequent fragment buffer).
- */
-struct FWCMD_ETH_GET_RX_FRAG_SIZE {
-	union FWCMD_HEADER header;
-	union FWCMD_ETH_ANON_180_PARAMS params;
-} __packed;
-
-#endif /* __fwcmd_eth_bmap_h__ */
diff --git a/drivers/staging/benet/fwcmd_hdr_bmap.h b/drivers/staging/benet/fwcmd_hdr_bmap.h
deleted file mode 100644
index 28b45328fe7..00000000000
--- a/drivers/staging/benet/fwcmd_hdr_bmap.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_hdr_bmap_h__
-#define __fwcmd_hdr_bmap_h__
-
-struct FWCMD_REQUEST_HEADER {
-	u8 opcode;
-	u8 subsystem;
-	u8 port_number;
-	u8 domain;
-	u32 timeout;
-	u32 request_length;
-	u32 rsvd0;
-} __packed;
-
-struct FWCMD_RESPONSE_HEADER {
-	u8 opcode;
-	u8 subsystem;
-	u8 rsvd0;
-	u8 domain;
-	u8 status;
-	u8 additional_status;
-	u16 rsvd1;
-	u32 response_length;
-	u32 actual_response_length;
-} __packed;
-
-/*
- *  The firmware/driver overwrites the input FWCMD_REQUEST_HEADER with
- *  the output  FWCMD_RESPONSE_HEADER.
- */
-union FWCMD_HEADER {
-	struct FWCMD_REQUEST_HEADER request;
-	struct FWCMD_RESPONSE_HEADER response;
-} __packed;
-
-#endif /* __fwcmd_hdr_bmap_h__ */
diff --git a/drivers/staging/benet/fwcmd_mcc.h b/drivers/staging/benet/fwcmd_mcc.h
deleted file mode 100644
index 9eeca878c1f..00000000000
--- a/drivers/staging/benet/fwcmd_mcc.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_mcc_amap_h__
-#define __fwcmd_mcc_amap_h__
-#include "fwcmd_opcodes.h"
-/*
- * Where applicable, a WRB, may contain a list of Scatter-gather elements.
- * Each element supports a 64 bit address and a 32bit length field.
- */
-struct BE_MCC_SGE_AMAP {
-	u8 pa_lo[32];	/* DWORD 0 */
-	u8 pa_hi[32];	/* DWORD 1 */
-	u8 length[32];	/* DWORD 2 */
-} __packed;
-struct MCC_SGE_AMAP {
-	u32 dw[3];
-};
-/*
- * The design of an MCC_SGE allows up to 19 elements to be embedded
- * in a WRB, supporting 64KB data transfers (assuming a 4KB page size).
- */
-struct BE_MCC_WRB_PAYLOAD_AMAP {
-	union {
-		struct BE_MCC_SGE_AMAP sgl[19];
-		u8 embedded[59][32];	/* DWORD 0 */
-	};
-} __packed;
-struct MCC_WRB_PAYLOAD_AMAP {
-	u32 dw[59];
-};
-
-/*
- * This is the structure of the MCC Command WRB for commands
- * sent to the Management Processing Unit (MPU). See section
- * for usage in embedded and non-embedded modes.
- */
-struct BE_MCC_WRB_AMAP {
-	u8 embedded;	/* DWORD 0 */
-	u8 rsvd0[2];	/* DWORD 0 */
-	u8 sge_count[5];	/* DWORD 0 */
-	u8 rsvd1[16];	/* DWORD 0 */
-	u8 special[8];	/* DWORD 0 */
-	u8 payload_length[32];	/* DWORD 1 */
-	u8 tag[2][32];	/* DWORD 2 */
-	u8 rsvd2[32];	/* DWORD 4 */
-	struct BE_MCC_WRB_PAYLOAD_AMAP payload;
-} __packed;
-struct MCC_WRB_AMAP {
-	u32 dw[64];
-};
-
-/*  This is the structure of the MCC Completion queue entry  */
-struct BE_MCC_CQ_ENTRY_AMAP {
-	u8 completion_status[16];	/* DWORD 0 */
-	u8 extended_status[16];	/* DWORD 0 */
-	u8 mcc_tag[2][32];	/* DWORD 1 */
-	u8 rsvd0[27];	/* DWORD 3 */
-	u8 consumed;	/* DWORD 3 */
-	u8 completed;	/* DWORD 3 */
-	u8 hpi_buffer_completion;	/* DWORD 3 */
-	u8 async_event;	/* DWORD 3 */
-	u8 valid;		/* DWORD 3 */
-} __packed;
-struct MCC_CQ_ENTRY_AMAP {
-	u32 dw[4];
-};
-
-/* Mailbox structures used by the MPU during bootstrap */
-struct BE_MCC_MAILBOX_AMAP {
-	struct BE_MCC_WRB_AMAP wrb;
-	struct BE_MCC_CQ_ENTRY_AMAP cq;
-} __packed;
-struct MCC_MAILBOX_AMAP {
-	u32 dw[68];
-};
-
-#endif /* __fwcmd_mcc_amap_h__ */
diff --git a/drivers/staging/benet/fwcmd_opcodes.h b/drivers/staging/benet/fwcmd_opcodes.h
deleted file mode 100644
index 23d569386b4..00000000000
--- a/drivers/staging/benet/fwcmd_opcodes.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_opcodes_amap_h__
-#define __fwcmd_opcodes_amap_h__
-
-/*
- * --- FWCMD_SUBSYSTEMS ---
- * The commands are grouped into the following subsystems. The subsystem
- * code along with the opcode uniquely identify a particular fwcmd.
- */
-#define FWCMD_SUBSYSTEM_RSVD  (0)	/* This subsystem is reserved. It is */
-						  /* never used. */
-#define FWCMD_SUBSYSTEM_COMMON (1)	/* CMDs in this group are common to
-					* all subsystems. See
-					* COMMON_SUBSYSTEM_OPCODES for opcodes
-					* and Common Host Configuration CMDs
-					* for the FWCMD descriptions.
-					*/
-#define FWCMD_SUBSYSTEM_COMMON_ISCSI    (2) /* CMDs in this group are */
-					/*
-					* common to Initiator and Target. See
-					* COMMON_ISCSI_SUBSYSTEM_OPCODES and
-					* Common iSCSI Initiator and Target
-					* CMDs for the command descriptions.
-					*/
-#define FWCMD_SUBSYSTEM_ETH             (3)	/* This subsystem is used to
-						execute  Ethernet commands.  */
-
-#define FWCMD_SUBSYSTEM_TPM             (4)	/* This subsystem is used
-						 to execute TPM  commands.  */
-#define FWCMD_SUBSYSTEM_PXE_UNDI        (5)	/* This subsystem is used
-						* to execute PXE
-						* and UNDI specific commands.
-						*/
-
-#define FWCMD_SUBSYSTEM_ISCSI_INI       (6)	/* This subsystem is used to
-						execute ISCSI Initiator
-						specific commands.
-						*/
-#define FWCMD_SUBSYSTEM_ISCSI_TGT       (7)	/* This subsystem is used
-						to execute iSCSI Target
-						specific commands.between
-						PTL and ARM firmware.
-						*/
-#define FWCMD_SUBSYSTEM_MILI_PTL        (8)	/* This subsystem is used to
-						execute iSCSI Target specific
-						commands.between MILI
-						and PTL.  */
-#define FWCMD_SUBSYSTEM_MILI_TMD        (9)	/* This subsystem is used to
-						execute iSCSI Target specific
-						commands between MILI
-						and TMD.  */
-#define FWCMD_SUBSYSTEM_PROXY           (11)	/* This subsystem is used
-						to execute proxied commands
-						within the host at the
-						explicit request of a
-						non priviledged domain.
-						This 'subsystem' is entirely
-						virtual from the controller
-						and firmware perspective as
-						it is implemented in host
-						drivers.
-						*/
-
-/*
- * --- COMMON_SUBSYSTEM_OPCODES ---
- * These opcodes are common to both networking and storage PCI
- * functions. They are used to reserve resources and configure
- * BladeEngine. These opcodes all use the FWCMD_SUBSYSTEM_COMMON
- * subsystem code.
- */
-#define OPCODE_COMMON_NTWK_MAC_QUERY    (1)
-#define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1)
-#define SUBSYSTEM_COMMON_NTWK_MAC_SET   (1)
-#define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1)
-#define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1)
-#define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1)
-#define SUBSYSTEM_COMMON_READ_FLASHROM  (1)
-#define SUBSYSTEM_COMMON_WRITE_FLASHROM (1)
-#define SUBSYSTEM_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (1)
-#define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1)
-#define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1)
-#define SUBSYSTEM_COMMON_RING_DESTROY   (1)
-#define SUBSYSTEM_COMMON_CQ_CREATE      (1)
-#define SUBSYSTEM_COMMON_EQ_CREATE      (1)
-#define SUBSYSTEM_COMMON_ETH_RX_CREATE  (1)
-#define SUBSYSTEM_COMMON_ETH_TX_CREATE  (1)
-#define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1)
-#define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1)
-#define SUBSYSTEM_COMMON_MCC_CREATE     (1)
-#define SUBSYSTEM_COMMON_JELL_CONFIG    (1)
-#define SUBSYSTEM_COMMON_FORCE_FAILOVER (1)
-#define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1)
-#define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1)
-#define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1)
-#define SUBSYSTEM_COMMON_GET_QOS        (1)
-#define SUBSYSTEM_COMMON_SET_QOS        (1)
-#define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1)
-#define SUBSYSTEM_COMMON_SEEPROM_READ   (1)
-#define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1)
-#define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1)
-#define SUBSYSTEM_COMMON_NOP            (1)
-#define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1)
-#define SUBSYSTEM_COMMON_GET_FW_VERSION (1)
-#define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1)
-#define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1)
-#define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1)
-#define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1)
-#define SUBSYSTEM_COMMON_GET_FAT        (1)
-#define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1)
-#define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1)
-#define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1)
-#define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1)
-#define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1)
-#define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1)
-#define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1)
-#define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1)
-#define SUBSYSTEM_COMMON_RED_CONFIG     (1)
-#define OPCODE_COMMON_NTWK_MAC_SET      (2)
-#define OPCODE_COMMON_NTWK_MULTICAST_SET (3)
-#define OPCODE_COMMON_NTWK_VLAN_CONFIG  (4)
-#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5)
-#define OPCODE_COMMON_READ_FLASHROM     (6)
-#define OPCODE_COMMON_WRITE_FLASHROM    (7)
-#define OPCODE_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (8)
-#define OPCODE_COMMON_ADD_PAGE_TABLES   (9)
-#define OPCODE_COMMON_REMOVE_PAGE_TABLES (10)
-#define OPCODE_COMMON_RING_DESTROY      (11)
-#define OPCODE_COMMON_CQ_CREATE         (12)
-#define OPCODE_COMMON_EQ_CREATE         (13)
-#define OPCODE_COMMON_ETH_RX_CREATE     (14)
-#define OPCODE_COMMON_ETH_TX_CREATE     (15)
-#define OPCODE_COMMON_NET_RESERVED0     (16)	/* Reserved */
-#define OPCODE_COMMON_NET_RESERVED1     (17)	/* Reserved */
-#define OPCODE_COMMON_NET_RESERVED2     (18)	/* Reserved */
-#define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19)
-#define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20)
-#define OPCODE_COMMON_MCC_CREATE        (21)
-#define OPCODE_COMMON_JELL_CONFIG       (22)
-#define OPCODE_COMMON_FORCE_FAILOVER    (23)
-#define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24)
-#define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25)
-#define OPCODE_COMMON_POST_ZERO_BUFFER  (26)
-#define OPCODE_COMMON_GET_QOS           (27)
-#define OPCODE_COMMON_SET_QOS           (28)
-#define OPCODE_COMMON_TCP_GET_STATISTICS (29)
-#define OPCODE_COMMON_SEEPROM_READ      (30)
-#define OPCODE_COMMON_TCP_STATE_QUERY   (31)
-#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32)
-#define OPCODE_COMMON_NOP               (33)
-#define OPCODE_COMMON_NTWK_RX_FILTER    (34)
-#define OPCODE_COMMON_GET_FW_VERSION    (35)
-#define OPCODE_COMMON_SET_FLOW_CONTROL  (36)
-#define OPCODE_COMMON_GET_FLOW_CONTROL  (37)
-#define OPCODE_COMMON_SET_TCP_PARAMETERS (38)
-#define OPCODE_COMMON_SET_FRAME_SIZE    (39)
-#define OPCODE_COMMON_GET_FAT           (40)
-#define OPCODE_COMMON_MODIFY_EQ_DELAY   (41)
-#define OPCODE_COMMON_FIRMWARE_CONFIG   (42)
-#define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43)
-#define OPCODE_COMMON_GET_DOMAIN_CONFIG (44)
-#define OPCODE_COMMON_SET_VLD_CONFIG    (45)
-#define OPCODE_COMMON_GET_VLD_CONFIG    (46)
-#define OPCODE_COMMON_GET_PORT_EQUALIZATION (47)
-#define OPCODE_COMMON_SET_PORT_EQUALIZATION (48)
-#define OPCODE_COMMON_RED_CONFIG        (49)
-
-
-
-/*
- * --- ETH_SUBSYSTEM_OPCODES ---
- * These opcodes are used for configuring the Ethernet interfaces. These
- * opcodes all use the FWCMD_SUBSYSTEM_ETH subsystem code.
- */
-#define OPCODE_ETH_RSS_CONFIG           (1)
-#define OPCODE_ETH_ACPI_CONFIG          (2)
-#define SUBSYSTEM_ETH_RSS_CONFIG        (3)
-#define SUBSYSTEM_ETH_ACPI_CONFIG       (3)
-#define OPCODE_ETH_PROMISCUOUS          (3)
-#define SUBSYSTEM_ETH_PROMISCUOUS       (3)
-#define SUBSYSTEM_ETH_GET_STATISTICS    (3)
-#define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE  (3)
-#define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE  (3)
-#define OPCODE_ETH_GET_STATISTICS       (4)
-#define OPCODE_ETH_GET_RX_FRAG_SIZE     (5)
-#define OPCODE_ETH_SET_RX_FRAG_SIZE     (6)
-
-
-
-
-
-/*
- * --- MCC_STATUS_CODE ---
- * These are the global status codes used by all subsystems
- */
-#define MCC_STATUS_SUCCESS              (0)	/* Indicates a successful
-						completion of  the command */
-#define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1)	/* The client does not have
-						sufficient privileges to
-						execute the command */
-#define MCC_STATUS_INVALID_PARAMETER    (2)	/* A parameter in the command
-						was invalid. The extended
-						status contains the index
-						of the parameter */
-#define MCC_STATUS_INSUFFICIENT_RESOURCES (3)	/* There are insufficient
-						chip resources to execute
-						the command */
-#define MCC_STATUS_QUEUE_FLUSHING       (4)	/* The command is completing
-						because the queue was
-						getting flushed */
-#define MCC_STATUS_DMA_FAILED           (5)	/* The command is completing
-						with a DMA error */
-
-/*
- * --- MGMT_ERROR_CODES ---
- * Error Codes returned in the status field of the FWCMD response header
- */
-#define MGMT_STATUS_SUCCESS             (0)	/* The FWCMD completed
-						without errors */
-#define MGMT_STATUS_FAILED              (1)	/* Error status in the Status
-						field of  the
-						struct FWCMD_RESPONSE_HEADER */
-#define MGMT_STATUS_ILLEGAL_REQUEST     (2)	/* Invalid FWCMD opcode */
-#define MGMT_STATUS_ILLEGAL_FIELD       (3)	/* Invalid parameter in
-						the FWCMD  payload */
-
-#endif /* __fwcmd_opcodes_amap_h__ */
diff --git a/drivers/staging/benet/fwcmd_types_bmap.h b/drivers/staging/benet/fwcmd_types_bmap.h
deleted file mode 100644
index 92217aff3a1..00000000000
--- a/drivers/staging/benet/fwcmd_types_bmap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_types_bmap_h__
-#define __fwcmd_types_bmap_h__
-
-/* MAC address format  */
-struct MAC_ADDRESS_FORMAT {
-	u16 SizeOfStructure;
-	u8 MACAddress[6];
-} __packed;
-
-#endif /* __fwcmd_types_bmap_h__ */
diff --git a/drivers/staging/benet/host_struct.h b/drivers/staging/benet/host_struct.h
deleted file mode 100644
index 3de6722b980..00000000000
--- a/drivers/staging/benet/host_struct.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __host_struct_amap_h__
-#define __host_struct_amap_h__
-#include "be_cm.h"
-#include "be_common.h"
-#include "descriptors.h"
-
-/* --- EQ_COMPLETION_MAJOR_CODE_ENUM --- */
-#define EQ_MAJOR_CODE_COMPLETION        (0)	/* Completion event on a */
-						  /* qcompletion ueue. */
-#define EQ_MAJOR_CODE_ETH               (1)	/* Affiliated Ethernet Event. */
-#define EQ_MAJOR_CODE_RESERVED          (2)	/* Reserved */
-#define EQ_MAJOR_CODE_RDMA              (3)	/* Affiliated RDMA Event. */
-#define EQ_MAJOR_CODE_ISCSI             (4)	/* Affiliated ISCSI Event */
-#define EQ_MAJOR_CODE_UNAFFILIATED      (5)	/* Unaffiliated Event */
-
-/* --- EQ_COMPLETION_MINOR_CODE_ENUM --- */
-#define EQ_MINOR_CODE_COMPLETION        (0)	/* Completion event on a */
-						  /* completion queue. */
-#define EQ_MINOR_CODE_OTHER             (1)	/* Other Event (TBD). */
-
-/* Queue Entry Definition for all 4 byte event queue types. */
-struct BE_EQ_ENTRY_AMAP {
-	u8 Valid;		/* DWORD 0 */
-	u8 MajorCode[3];	/* DWORD 0 */
-	u8 MinorCode[12];	/* DWORD 0 */
-	u8 ResourceID[16];	/* DWORD 0 */
-} __packed;
-struct EQ_ENTRY_AMAP {
-	u32 dw[1];
-};
-
-/*
- * --- ETH_EVENT_CODE ---
- * These codes are returned by the MPU when one of these events has occurred,
- * and the event is configured to report to an Event Queue when an event
- * is detected.
- */
-#define ETH_EQ_LINK_STATUS              (0)	/* Link status change event */
-						  /* detected. */
-#define ETH_EQ_WATERMARK                (1)	/* watermark event detected. */
-#define ETH_EQ_MAGIC_PKT                (2)	/* magic pkt event detected. */
-#define ETH_EQ_ACPI_PKT0                (3)	/* ACPI interesting packet */
-						  /* detected. */
-#define ETH_EQ_ACPI_PKT1                (3)	/* ACPI interesting packet */
-						  /* detected. */
-#define ETH_EQ_ACPI_PKT2                (3)	/* ACPI interesting packet */
-						  /* detected. */
-#define ETH_EQ_ACPI_PKT3                (3)	/* ACPI interesting packet */
-						  /* detected. */
-
-/*
- * --- ETH_TX_COMPL_STATUS_ENUM ---
- * Status codes contained in Ethernet TX completion descriptors.
- */
-#define ETH_COMP_VALID                  (0)
-#define ETH_COMP_ERROR                  (1)
-#define ETH_COMP_INVALID                (15)
-
-/*
- * --- ETH_TX_COMPL_PORT_ENUM ---
- * Port indicator contained in Ethernet TX completion descriptors.
- */
-#define ETH_COMP_PORT0                  (0)
-#define ETH_COMP_PORT1                  (1)
-#define ETH_COMP_MGMT                   (2)
-
-/*
- * --- ETH_TX_COMPL_CT_ENUM ---
- * Completion type indicator contained in Ethernet TX completion descriptors.
- */
-#define ETH_COMP_ETH                    (0)
-
-/*
- * Work request block that the driver issues to the chip for
- * Ethernet transmissions. All control fields must be valid in each WRB for
- * a message. The controller, as specified by the flags, optionally writes
- * an entry to the Completion Ring and generate an event.
- */
-struct BE_ETH_WRB_AMAP {
-	u8 frag_pa_hi[32];	/* DWORD 0 */
-	u8 frag_pa_lo[32];	/* DWORD 1 */
-	u8 complete;	/* DWORD 2 */
-	u8 event;		/* DWORD 2 */
-	u8 crc;		/* DWORD 2 */
-	u8 forward;		/* DWORD 2 */
-	u8 ipsec;		/* DWORD 2 */
-	u8 mgmt;		/* DWORD 2 */
-	u8 ipcs;		/* DWORD 2 */
-	u8 udpcs;		/* DWORD 2 */
-	u8 tcpcs;		/* DWORD 2 */
-	u8 lso;		/* DWORD 2 */
-	u8 last;		/* DWORD 2 */
-	u8 vlan;		/* DWORD 2 */
-	u8 dbg[3];		/* DWORD 2 */
-	u8 hash_val[3];	/* DWORD 2 */
-	u8 lso_mss[14];	/* DWORD 2 */
-	u8 frag_len[16];	/* DWORD 3 */
-	u8 vlan_tag[16];	/* DWORD 3 */
-} __packed;
-struct ETH_WRB_AMAP {
-	u32 dw[4];
-};
-
-/* This is an Ethernet transmit completion descriptor */
-struct BE_ETH_TX_COMPL_AMAP {
-	u8 user_bytes[16];	/* DWORD 0 */
-	u8 nwh_bytes[8];	/* DWORD 0 */
-	u8 lso;		/* DWORD 0 */
-	u8 rsvd0[7];	/* DWORD 0 */
-	u8 wrb_index[16];	/* DWORD 1 */
-	u8 ct[2];		/* DWORD 1 */
-	u8 port[2];		/* DWORD 1 */
-	u8 rsvd1[8];	/* DWORD 1 */
-	u8 status[4];	/* DWORD 1 */
-	u8 rsvd2[16];	/* DWORD 2 */
-	u8 ringid[11];	/* DWORD 2 */
-	u8 hash_val[4];	/* DWORD 2 */
-	u8 valid;		/* DWORD 2 */
-	u8 rsvd3[32];	/* DWORD 3 */
-} __packed;
-struct ETH_TX_COMPL_AMAP {
-	u32 dw[4];
-};
-
-/* Ethernet Receive Buffer descriptor */
-struct BE_ETH_RX_D_AMAP {
-	u8 fragpa_hi[32];	/* DWORD 0 */
-	u8 fragpa_lo[32];	/* DWORD 1 */
-} __packed;
-struct ETH_RX_D_AMAP {
-	u32 dw[2];
-};
-
-/* This is an Ethernet Receive Completion Descriptor */
-struct BE_ETH_RX_COMPL_AMAP {
-	u8 vlan_tag[16];	/* DWORD 0 */
-	u8 pktsize[14];	/* DWORD 0 */
-	u8 port;		/* DWORD 0 */
-	u8 rsvd0;		/* DWORD 0 */
-	u8 err;		/* DWORD 1 */
-	u8 rsshp;		/* DWORD 1 */
-	u8 ipf;		/* DWORD 1 */
-	u8 tcpf;		/* DWORD 1 */
-	u8 udpf;		/* DWORD 1 */
-	u8 ipcksm;		/* DWORD 1 */
-	u8 tcpcksm;		/* DWORD 1 */
-	u8 udpcksm;		/* DWORD 1 */
-	u8 macdst[6];	/* DWORD 1 */
-	u8 vtp;		/* DWORD 1 */
-	u8 vtm;		/* DWORD 1 */
-	u8 fragndx[10];	/* DWORD 1 */
-	u8 ct[2];		/* DWORD 1 */
-	u8 ipsec;		/* DWORD 1 */
-	u8 numfrags[3];	/* DWORD 1 */
-	u8 rsvd1[31];	/* DWORD 2 */
-	u8 valid;		/* DWORD 2 */
-	u8 rsshash[32];	/* DWORD 3 */
-} __packed;
-struct ETH_RX_COMPL_AMAP {
-	u32 dw[4];
-};
-
-#endif /* __host_struct_amap_h__ */
diff --git a/drivers/staging/benet/hwlib.h b/drivers/staging/benet/hwlib.h
deleted file mode 100644
index afedf4dc590..00000000000
--- a/drivers/staging/benet/hwlib.h
+++ /dev/null
@@ -1,830 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#ifndef __hwlib_h__
-#define __hwlib_h__
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-#include "regmap.h"		/* srcgen array map output */
-
-#include "asyncmesg.h"
-#include "fwcmd_opcodes.h"
-#include "post_codes.h"
-#include "fwcmd_mcc.h"
-
-#include "fwcmd_types_bmap.h"
-#include "fwcmd_common_bmap.h"
-#include "fwcmd_eth_bmap.h"
-#include "bestatus.h"
-/*
- *
- * Macros for reading/writing a protection domain or CSR registers
- * in BladeEngine.
- */
-#define PD_READ(fo, field)	ioread32((fo)->db_va + \
-		offsetof(struct BE_PROTECTION_DOMAIN_DBMAP_AMAP, field)/8)
-
-#define PD_WRITE(fo, field, val) iowrite32(val, (fo)->db_va + \
-		offsetof(struct BE_PROTECTION_DOMAIN_DBMAP_AMAP, field)/8)
-
-#define CSR_READ(fo, field)	ioread32((fo)->csr_va + \
-		offsetof(struct BE_BLADE_ENGINE_CSRMAP_AMAP, field)/8)
-
-#define CSR_WRITE(fo, field, val)	iowrite32(val, (fo)->csr_va + \
-		offsetof(struct BE_BLADE_ENGINE_CSRMAP_AMAP, field)/8)
-
-#define PCICFG0_READ(fo, field)	ioread32((fo)->pci_va + \
-		offsetof(struct BE_PCICFG0_CSRMAP_AMAP, field)/8)
-
-#define PCICFG0_WRITE(fo, field, val)	iowrite32(val, (fo)->pci_va + \
-		offsetof(struct BE_PCICFG0_CSRMAP_AMAP, field)/8)
-
-#define PCICFG1_READ(fo, field)	ioread32((fo)->pci_va + \
-		offsetof(struct BE_PCICFG1_CSRMAP_AMAP, field)/8)
-
-#define PCICFG1_WRITE(fo, field, val)	iowrite32(val, (fo)->pci_va + \
-		offsetof(struct BE_PCICFG1_CSRMAP_AMAP, field)/8)
-
-#ifdef BE_DEBUG
-#define ASSERT(c)       BUG_ON(!(c));
-#else
-#define ASSERT(c)
-#endif
-
-/* debug levels */
-enum BE_DEBUG_LEVELS {
-	DL_ALWAYS = 0,		/* cannot be masked */
-	DL_ERR = 0x1,		/* errors that should never happen */
-	DL_WARN = 0x2,		/* something questionable.
-				   recoverable errors */
-	DL_NOTE = 0x4,		/* infrequent, important debug info */
-	DL_INFO = 0x8,		/* debug information */
-	DL_VERBOSE = 0x10,	/* detailed info, such as buffer traces */
-	BE_DL_MIN_VALUE = 0x1,	/* this is the min value used */
-	BE_DL_MAX_VALUE = 0x80	/* this is the higheset value used */
-} ;
-
-extern unsigned int trace_level;
-
-#define TRACE(lm, fmt, args...)  {				\
-		if (trace_level & lm) {				\
-			printk(KERN_NOTICE "BE: %s:%d \n" fmt,	\
-			__FILE__ , __LINE__ , ## args);		\
-		}						\
-	}
-
-static inline unsigned int be_trace_set_level(unsigned int level)
-{
-	unsigned int old_level = trace_level;
-	trace_level = level;
-	return old_level;
-}
-
-#define be_trace_get_level() 	trace_level
-/*
- * Returns number of pages spanned by the size of data
- * starting at the given address.
- */
-#define PAGES_SPANNED(_address, _size) \
-   ((u32)((((size_t)(_address) & (PAGE_SIZE - 1)) + \
-		(_size) + (PAGE_SIZE - 1)) >> PAGE_SHIFT))
-/* Byte offset into the page corresponding to given address */
-#define OFFSET_IN_PAGE(_addr_) ((size_t)(_addr_) & (PAGE_SIZE-1))
-
-/*
- * circular subtract.
- * Returns a - b assuming a circular number system, where a and b are
- * in range (0, maxValue-1). If a==b, zero is returned so the
- * highest value possible with this subtraction is maxValue-1.
- */
-static inline u32 be_subc(u32 a, u32 b, u32 max)
-{
-	ASSERT(a <= max && b <= max);
-	ASSERT(max > 0);
-	return a >= b ? (a - b) : (max - b + a);
-}
-
-static inline u32 be_addc(u32 a, u32 b, u32 max)
-{
-	ASSERT(a < max);
-	ASSERT(max > 0);
-	return (max - a > b) ? (a + b) : (b + a - max);
-}
-
-/* descriptor for a physically contiguous memory used for ring */
-struct ring_desc {
-	u32 length;	/* length in bytes */
-	void *va; 	/* virtual address */
-	u64 pa;		/* bus address */
-} ;
-
-/*
- * This structure stores information about a ring shared between hardware
- * and software.  Each ring is allocated by the driver in the uncached
- * extension and mapped into BladeEngine's unified table.
- */
-struct mp_ring {
-	u32 pages;		/* queue size in pages */
-	u32 id;			/* queue id assigned by beklib */
-	u32 num;		/* number of elements in queue */
-	u32 cidx;		/* consumer index */
-	u32 pidx;		/* producer index -- not used by most rings */
-	u32 itemSize;		/* size in bytes of one object */
-
-	void *va;		/* The virtual address of the ring.
-				   This should be last to allow 32 & 64
-				   bit debugger extensions to work. */
-} ;
-
-/*-----------  amap bit filed get / set macros and functions -----*/
-/*
- * Structures defined in the map header files (under fw/amap/) with names
- * in the format BE_<name>_AMAP are pseudo structures with members
- * of type u8. These structures are templates that are used in
- * conjuntion with the structures with names in the format
- * <name>_AMAP to calculate the bit masks and bit offsets to get or set
- * bit fields in structures. The structures <name>_AMAP are arrays
- * of 32 bits words and have the correct size.  The following macros
- * provide convenient ways to get and set the various members
- * in the structures without using strucctures with bit fields.
- * Always use the macros AMAP_GET_BITS_PTR and AMAP_SET_BITS_PTR
- * macros to extract and set various members.
- */
-
-/*
- * Returns the a bit mask for the register that is NOT shifted into location.
- * That means return values always look like: 0x1, 0xFF, 0x7FF, etc...
- */
-static inline u32 amap_mask(u32 bit_size)
-{
-	return bit_size == 32 ? 0xFFFFFFFF : (1 << bit_size) - 1;
-}
-
-#define AMAP_BIT_MASK(_struct_, field)       \
-	amap_mask(AMAP_BIT_SIZE(_struct_, field))
-
-/*
- * non-optimized set bits function. First clears the bits and then assigns them.
- * This does not require knowledge of the particular DWORD you are setting.
- * e.g. AMAP_SET_BITS_PTR (struct, field1, &contextMemory, 123);
- */
-static inline void
-amap_set(void *ptr, u32 dw_offset, u32 mask, u32 offset, u32 value)
-{
-	u32 *dw = (u32 *)ptr;
-	*(dw + dw_offset) &= ~(mask << offset);
-	*(dw + dw_offset) |= (mask & value) << offset;
-}
-
-#define AMAP_SET_BITS_PTR(_struct_, field, _structPtr_, val)	\
-	amap_set(_structPtr_, AMAP_WORD_OFFSET(_struct_, field),\
-		AMAP_BIT_MASK(_struct_, field),			\
-		AMAP_BIT_OFFSET(_struct_, field), val)
-/*
- * Non-optimized routine that gets the bits without knowing the correct DWORD.
- * e.g. fieldValue = AMAP_GET_BITS_PTR (struct, field1, &contextMemory);
- */
-static inline u32
-amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
-{
-	u32 *dw = (u32 *)ptr;
-	return mask & (*(dw + dw_offset) >> offset);
-}
-#define AMAP_GET_BITS_PTR(_struct_, field, _structPtr_)			\
-	amap_get(_structPtr_, AMAP_WORD_OFFSET(_struct_, field),	\
-		AMAP_BIT_MASK(_struct_, field),				\
-		AMAP_BIT_OFFSET(_struct_, field))
-
-/* Returns 0-31 representing bit offset within a DWORD of a bitfield. */
-#define AMAP_BIT_OFFSET(_struct_, field)                  \
-	(offsetof(struct BE_ ## _struct_ ## _AMAP, field) % 32)
-
-/* Returns 0-n representing DWORD offset of bitfield within the structure. */
-#define AMAP_WORD_OFFSET(_struct_, field)  \
-		  (offsetof(struct BE_ ## _struct_ ## _AMAP, field)/32)
-
-/* Returns size of bitfield in bits. */
-#define AMAP_BIT_SIZE(_struct_, field) \
-		sizeof(((struct BE_ ## _struct_ ## _AMAP*)0)->field)
-
-struct be_mcc_wrb_response_copy {
-	u16 length;		/* bytes in response */
-	u16 fwcmd_offset;	/* offset within the wrb of the response */
-	void *va;		/* user's va to copy response into */
-
-} ;
-typedef void (*mcc_wrb_cqe_callback) (void *context, int status,
-				struct MCC_WRB_AMAP *optional_wrb);
-struct be_mcc_wrb_context {
-
-	mcc_wrb_cqe_callback internal_cb;	/* Function to call on
-						completion */
-	void *internal_cb_context;	/* Parameter to pass
-						   to completion function */
-
-	mcc_wrb_cqe_callback cb;	/* Function to call on completion */
-	void *cb_context;	/* Parameter to pass to completion function */
-
-	int *users_final_status;	/* pointer to a local
-						variable for synchronous
-						commands */
-	struct MCC_WRB_AMAP *wrb;	/* pointer to original wrb for embedded
-						commands only */
-	struct list_head next;	/* links context structs together in
-				   free list */
-
-	struct be_mcc_wrb_response_copy copy;	/* Optional parameters to copy
-					   embedded response to user's va */
-
-#if defined(BE_DEBUG)
-	u16 subsystem, opcode;	/* Track this FWCMD for debug builds. */
-	struct MCC_WRB_AMAP *ring_wrb;
-	u32 consumed_count;
-#endif
-} ;
-
-/*
-    Represents a function object for network or storage.  This
-    is used to manage per-function resources like MCC CQs, etc.
-*/
-struct be_function_object {
-
-	u32 magic;		/*!< magic for detecting memory corruption. */
-
-	/* PCI BAR mapped addresses */
-	u8 __iomem *csr_va;	/* CSR */
-	u8 __iomem *db_va;	/* Door Bell */
-	u8 __iomem *pci_va;	/* PCI config space */
-	u32 emulate;		/* if set, MPU is not available.
-				  Emulate everything.     */
-	u32 pend_queue_driving;	/* if set, drive the queued WRBs
-				   after releasing the WRB lock */
-
-	spinlock_t post_lock;	/* lock for verifying one thread posting wrbs */
-	spinlock_t cq_lock;	/* lock for verifying one thread
-				   processing cq */
-	spinlock_t mcc_context_lock;	/* lock for protecting mcc
-					   context free list */
-	unsigned long post_irq;
-	unsigned long cq_irq;
-
-	u32 type;
-	u32 pci_function_number;
-
-	struct be_mcc_object *mcc;	/* mcc rings. */
-
-	struct {
-		struct MCC_MAILBOX_AMAP *va;	/* VA to the mailbox */
-		u64 pa;	/* PA to the mailbox */
-		u32 length;	/* byte length of mailbox */
-
-		/* One default context struct used for posting at
-		 * least one MCC_WRB
-		 */
-		struct be_mcc_wrb_context default_context;
-		bool default_context_allocated;
-	} mailbox;
-
-	struct {
-
-		/* Wake on lans configured. */
-		u32 wol_bitmask;	/* bits 0,1,2,3 are set if
-					   corresponding index is enabled */
-	} config;
-
-
-	struct BE_FIRMWARE_CONFIG fw_config;
-} ;
-
-/*
-      Represents an Event Queue
-*/
-struct be_eq_object {
-	u32 magic;
-	atomic_t ref_count;
-
-	struct be_function_object *parent_function;
-
-	struct list_head eq_list;
-	struct list_head cq_list_head;
-
-	u32 eq_id;
-	void *cb_context;
-
-} ;
-
-/*
-    Manages a completion queue
-*/
-struct be_cq_object {
-	u32 magic;
-	atomic_t ref_count;
-
-	struct be_function_object *parent_function;
-	struct be_eq_object *eq_object;
-
-	struct list_head cq_list;
-	struct list_head cqlist_for_eq;
-
-	void *va;
-	u32 num_entries;
-
-	void *cb_context;
-
-	u32 cq_id;
-
-} ;
-
-/*
-    Manages an ethernet send queue
-*/
-struct be_ethsq_object {
-	u32 magic;
-
-	struct list_head list;
-
-	struct be_function_object *parent_function;
-	struct be_cq_object *cq_object;
-	u32 bid;
-
-} ;
-
-/*
-@brief
-    Manages an ethernet receive queue
-*/
-struct be_ethrq_object {
-	u32 magic;
-	struct list_head list;
-	struct be_function_object *parent_function;
-	u32 rid;
-	struct be_cq_object *cq_object;
-	struct be_cq_object *rss_cq_object[4];
-
-} ;
-
-/*
-    Manages an MCC
-*/
-typedef void (*mcc_async_event_callback) (void *context, u32 event_code,
-				void *event);
-struct be_mcc_object {
-	u32 magic;
-
-	struct be_function_object *parent_function;
-	struct list_head mcc_list;
-
-	struct be_cq_object *cq_object;
-
-	/* Async event callback for MCC CQ. */
-	mcc_async_event_callback async_cb;
-	void *async_context;
-
-	struct {
-		struct be_mcc_wrb_context *base;
-		u32 num;
-		struct list_head list_head;
-	} wrb_context;
-
-	struct {
-		struct ring_desc *rd;
-		struct mp_ring ring;
-	} sq;
-
-	struct {
-		struct mp_ring ring;
-	} cq;
-
-	u32 processing;		/* flag indicating that one thread
-				   is processing CQ */
-	u32 rearm;		/* doorbell rearm setting to make
-				   sure the active processing thread */
-	/* rearms the CQ if any of the threads requested it. */
-
-	struct list_head backlog;
-	u32 backlog_length;
-	u32 driving_backlog;
-	u32 consumed_index;
-
-} ;
-
-
-/* Queue context header -- the required software information for
- * queueing a WRB.
- */
-struct be_queue_driver_context {
-	mcc_wrb_cqe_callback internal_cb;	/* Function to call on
-						   completion */
-	void *internal_cb_context;	/* Parameter to pass
-						   to completion function */
-
-	mcc_wrb_cqe_callback cb;	/* Function to call on completion */
-	void *cb_context;	/* Parameter to pass to completion function */
-
-	struct be_mcc_wrb_response_copy copy;	/* Optional parameters to copy
-					   embedded response to user's va */
-	void *optional_fwcmd_va;
-	struct list_head list;
-	u32 bytes;
-} ;
-
-/*
- * Common MCC WRB header that all commands require.
- */
-struct be_mcc_wrb_header {
-	u8 rsvd[offsetof(struct BE_MCC_WRB_AMAP, payload)/8];
-} ;
-
-/*
- * All non embedded commands supported by hwlib functions only allow
- * 1 SGE.  This queue context handles them all.
- */
-struct be_nonembedded_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct MCC_SGE_AMAP sge[1];
-} ;
-
-/*
- * ------------------------------------------------------------------------
- *  This section contains the specific queue struct for each command.
- *  The user could always provide a be_generic_q_ctxt but this is a
- *  rather large struct.  By using the specific struct, memory consumption
- *  can be reduced.
- * ------------------------------------------------------------------------
- */
-
-struct be_link_status_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY fwcmd;
-} ;
-
-struct be_multicast_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct FWCMD_COMMON_NTWK_MULTICAST_SET fwcmd;
-} ;
-
-
-struct be_vlan_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct FWCMD_COMMON_NTWK_VLAN_CONFIG fwcmd;
-} ;
-
-struct be_promiscuous_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct FWCMD_ETH_PROMISCUOUS fwcmd;
-} ;
-
-struct be_force_failover_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct FWCMD_COMMON_FORCE_FAILOVER fwcmd;
-} ;
-
-
-struct be_rxf_filter_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct FWCMD_COMMON_NTWK_RX_FILTER fwcmd;
-} ;
-
-struct be_eq_modify_delay_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct FWCMD_COMMON_MODIFY_EQ_DELAY fwcmd;
-} ;
-
-/*
- * The generic context is the largest size that would be required.
- * It is the software context plus an entire WRB.
- */
-struct be_generic_q_ctxt {
-	struct be_queue_driver_context context;
-	struct be_mcc_wrb_header wrb_header;
-	struct MCC_WRB_PAYLOAD_AMAP payload;
-} ;
-
-/*
- * Types for the BE_QUEUE_CONTEXT object.
- */
-#define BE_QUEUE_INVALID	(0)
-#define BE_QUEUE_LINK_STATUS	(0xA006)
-#define BE_QUEUE_ETH_STATS	(0xA007)
-#define BE_QUEUE_TPM_STATS	(0xA008)
-#define BE_QUEUE_TCP_STATS	(0xA009)
-#define BE_QUEUE_MULTICAST	(0xA00A)
-#define BE_QUEUE_VLAN		(0xA00B)
-#define BE_QUEUE_RSS		(0xA00C)
-#define BE_QUEUE_FORCE_FAILOVER	(0xA00D)
-#define BE_QUEUE_PROMISCUOUS	(0xA00E)
-#define BE_QUEUE_WAKE_ON_LAN	(0xA00F)
-#define BE_QUEUE_NOP		(0xA010)
-
-/* --- BE_FUNCTION_ENUM --- */
-#define BE_FUNCTION_TYPE_ISCSI          (0)
-#define BE_FUNCTION_TYPE_NETWORK        (1)
-#define BE_FUNCTION_TYPE_ARM            (2)
-
-/* --- BE_ETH_TX_RING_TYPE_ENUM --- */
-#define BE_ETH_TX_RING_TYPE_FORWARDING  (1) 	/* Ether ring for forwarding */
-#define BE_ETH_TX_RING_TYPE_STANDARD    (2)	/* Ether ring for sending */
-						/* network packets. */
-#define BE_ETH_TX_RING_TYPE_BOUND       (3)	/* Ethernet ring for sending */
-						/* network packets, bound */
-						/* to a physical port. */
-/*
- * ----------------------------------------------------------------------
- *   API MACROS
- * ----------------------------------------------------------------------
- */
-#define BE_FWCMD_NAME(_short_name_)     struct FWCMD_##_short_name_
-#define BE_OPCODE_NAME(_short_name_)    OPCODE_##_short_name_
-#define BE_SUBSYSTEM_NAME(_short_name_) SUBSYSTEM_##_short_name_
-
-
-#define BE_PREPARE_EMBEDDED_FWCMD(_pfob_, _wrb_, _short_name_)	\
-	((BE_FWCMD_NAME(_short_name_) *)				\
-	be_function_prepare_embedded_fwcmd(_pfob_, _wrb_,	\
-		sizeof(BE_FWCMD_NAME(_short_name_)),		\
-		FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.request), \
-		FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.response), \
-		BE_OPCODE_NAME(_short_name_),				\
-		BE_SUBSYSTEM_NAME(_short_name_)));
-
-#define BE_PREPARE_NONEMBEDDED_FWCMD(_pfob_, _wrb_, _iva_, _ipa_, _short_name_)\
-	((BE_FWCMD_NAME(_short_name_) *)				\
-	be_function_prepare_nonembedded_fwcmd(_pfob_, _wrb_, (_iva_), (_ipa_), \
-		sizeof(BE_FWCMD_NAME(_short_name_)),		\
-		FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.request), \
-		FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.response), \
-		BE_OPCODE_NAME(_short_name_),				\
-		BE_SUBSYSTEM_NAME(_short_name_)));
-
-int be_function_object_create(u8 __iomem *csr_va, u8 __iomem *db_va,
-	u8 __iomem *pci_va, u32 function_type, struct ring_desc *mailbox_rd,
-	  struct be_function_object *pfob);
-
-int be_function_object_destroy(struct be_function_object *pfob);
-int be_function_cleanup(struct be_function_object *pfob);
-
-
-int be_function_get_fw_version(struct be_function_object *pfob,
-	struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD *fw_version,
-	mcc_wrb_cqe_callback cb, void *cb_context);
-
-
-int be_eq_modify_delay(struct be_function_object *pfob,
-		   u32 num_eq, struct be_eq_object **eq_array,
-		   u32 *eq_delay_array, mcc_wrb_cqe_callback cb,
-		   void *cb_context,
-		   struct be_eq_modify_delay_q_ctxt *q_ctxt);
-
-
-
-int be_eq_create(struct be_function_object *pfob,
-	     struct ring_desc *rd, u32 eqe_size, u32 num_entries,
-	     u32 watermark, u32 timer_delay, struct be_eq_object *eq_object);
-
-int be_eq_destroy(struct be_eq_object *eq);
-
-int be_cq_create(struct be_function_object *pfob,
-	struct ring_desc *rd, u32 length,
-	bool solicited_eventable, bool no_delay,
-	u32 wm_thresh, struct be_eq_object *eq_object,
-	struct be_cq_object *cq_object);
-
-int be_cq_destroy(struct be_cq_object *cq);
-
-int be_mcc_ring_create(struct be_function_object *pfob,
-		   struct ring_desc *rd, u32 length,
-		   struct be_mcc_wrb_context *context_array,
-		   u32 num_context_entries,
-		   struct be_cq_object *cq, struct be_mcc_object *mcc);
-int be_mcc_ring_destroy(struct be_mcc_object *mcc_object);
-
-int be_mcc_process_cq(struct be_mcc_object *mcc_object, bool rearm);
-
-int be_mcc_add_async_event_callback(struct be_mcc_object *mcc_object,
-		mcc_async_event_callback cb, void *cb_context);
-
-int be_pci_soft_reset(struct be_function_object *pfob);
-
-
-int be_drive_POST(struct be_function_object *pfob);
-
-
-int be_eth_sq_create(struct be_function_object *pfob,
-		struct ring_desc *rd, u32 length_in_bytes,
-		u32 type, u32 ulp, struct be_cq_object *cq_object,
-		struct be_ethsq_object *eth_sq);
-
-struct be_eth_sq_parameters {
-	u32 port;
-	u32 rsvd0[2];
-} ;
-
-int be_eth_sq_create_ex(struct be_function_object *pfob,
-		    struct ring_desc *rd, u32 length_in_bytes,
-		    u32 type, u32 ulp, struct be_cq_object *cq_object,
-		    struct be_eth_sq_parameters *ex_parameters,
-		    struct be_ethsq_object *eth_sq);
-int be_eth_sq_destroy(struct be_ethsq_object *eth_sq);
-
-int be_eth_set_flow_control(struct be_function_object *pfob,
-			bool txfc_enable, bool rxfc_enable);
-
-int be_eth_get_flow_control(struct be_function_object *pfob,
-			bool *txfc_enable, bool *rxfc_enable);
-int be_eth_set_qos(struct be_function_object *pfob, u32 max_bps, u32 max_pps);
-
-int be_eth_get_qos(struct be_function_object *pfob, u32 *max_bps, u32 *max_pps);
-
-int be_eth_set_frame_size(struct be_function_object *pfob,
-		      u32 *tx_frame_size, u32 *rx_frame_size);
-
-int be_eth_rq_create(struct be_function_object *pfob,
-		 struct ring_desc *rd, struct be_cq_object *cq_object,
-		 struct be_cq_object *bcmc_cq_object,
-		 struct be_ethrq_object *eth_rq);
-
-int be_eth_rq_destroy(struct be_ethrq_object *eth_rq);
-
-int be_eth_rq_destroy_options(struct be_ethrq_object *eth_rq, bool flush,
-		mcc_wrb_cqe_callback cb, void *cb_context);
-int be_eth_rq_set_frag_size(struct be_function_object *pfob,
-		u32 new_frag_size_bytes, u32 *actual_frag_size_bytes);
-int be_eth_rq_get_frag_size(struct be_function_object *pfob,
-						u32 *frag_size_bytes);
-
-void *be_function_prepare_embedded_fwcmd(struct be_function_object *pfob,
-		   struct MCC_WRB_AMAP *wrb,
-		   u32 payload_length, u32 request_length,
-		   u32 response_length, u32 opcode, u32 subsystem);
-void *be_function_prepare_nonembedded_fwcmd(struct be_function_object *pfob,
-	struct MCC_WRB_AMAP *wrb, void *fwcmd_header_va, u64 fwcmd_header_pa,
-	u32 payload_length, u32 request_length, u32 response_length,
-	u32 opcode, u32 subsystem);
-
-
-struct MCC_WRB_AMAP *
-be_function_peek_mcc_wrb(struct be_function_object *pfob);
-
-int be_rxf_mac_address_read_write(struct be_function_object *pfob,
-	      bool port1, bool mac1, bool mgmt,
-	      bool write, bool permanent, u8 *mac_address,
-	      mcc_wrb_cqe_callback cb,
-	      void *cb_context);
-
-int be_rxf_multicast_config(struct be_function_object *pfob,
-			bool promiscuous, u32 num, u8 *mac_table,
-			mcc_wrb_cqe_callback cb,
-			void *cb_context,
-			struct be_multicast_q_ctxt *q_ctxt);
-
-int be_rxf_vlan_config(struct be_function_object *pfob,
-	   bool promiscuous, u32 num, u16 *vlan_tag_array,
-	   mcc_wrb_cqe_callback cb, void *cb_context,
-	   struct be_vlan_q_ctxt *q_ctxt);
-
-
-int be_rxf_link_status(struct be_function_object *pfob,
-		   struct BE_LINK_STATUS *link_status,
-		   mcc_wrb_cqe_callback cb,
-		   void *cb_context,
-		   struct be_link_status_q_ctxt *q_ctxt);
-
-
-int be_rxf_query_eth_statistics(struct be_function_object *pfob,
-		struct FWCMD_ETH_GET_STATISTICS *va_for_fwcmd,
-		u64 pa_for_fwcmd, mcc_wrb_cqe_callback cb,
-		void *cb_context,
-		struct be_nonembedded_q_ctxt *q_ctxt);
-
-int be_rxf_promiscuous(struct be_function_object *pfob,
-		   bool enable_port0, bool enable_port1,
-		   mcc_wrb_cqe_callback cb, void *cb_context,
-		   struct be_promiscuous_q_ctxt *q_ctxt);
-
-
-int be_rxf_filter_config(struct be_function_object *pfob,
-		     struct NTWK_RX_FILTER_SETTINGS *settings,
-		     mcc_wrb_cqe_callback cb,
-		     void *cb_context,
-		     struct be_rxf_filter_q_ctxt *q_ctxt);
-
-/*
- * ------------------------------------------------------
- *  internal functions used by hwlib
- * ------------------------------------------------------
- */
-
-
-int be_function_ring_destroy(struct be_function_object *pfob,
-		       u32 id, u32 ring_type, mcc_wrb_cqe_callback cb,
-		       void *cb_context,
-		       mcc_wrb_cqe_callback internal_cb,
-		       void *internal_callback_context);
-
-int be_function_post_mcc_wrb(struct be_function_object *pfob,
-		struct MCC_WRB_AMAP *wrb,
-		struct be_generic_q_ctxt *q_ctxt,
-		mcc_wrb_cqe_callback cb, void *cb_context,
-		mcc_wrb_cqe_callback internal_cb,
-		void *internal_cb_context, void *optional_fwcmd_va,
-		struct be_mcc_wrb_response_copy *response_copy);
-
-int be_function_queue_mcc_wrb(struct be_function_object *pfob,
-			  struct be_generic_q_ctxt *q_ctxt);
-
-/*
- * ------------------------------------------------------
- *  MCC QUEUE
- * ------------------------------------------------------
- */
-
-int be_mpu_init_mailbox(struct be_function_object *pfob, struct ring_desc *rd);
-
-
-struct MCC_WRB_AMAP *
-_be_mpu_peek_ring_wrb(struct be_mcc_object *mcc, bool driving_queue);
-
-struct be_mcc_wrb_context *
-_be_mcc_allocate_wrb_context(struct be_function_object *pfob);
-
-void _be_mcc_free_wrb_context(struct be_function_object *pfob,
-			 struct be_mcc_wrb_context *context);
-
-int _be_mpu_post_wrb_mailbox(struct be_function_object *pfob,
-	 struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context);
-
-int _be_mpu_post_wrb_ring(struct be_mcc_object *mcc,
-	struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context);
-
-void be_drive_mcc_wrb_queue(struct be_mcc_object *mcc);
-
-
-/*
- * ------------------------------------------------------
- *  Ring Sizes
- * ------------------------------------------------------
- */
-static inline u32 be_ring_encoding_to_length(u32 encoding, u32 object_size)
-{
-
-	ASSERT(encoding != 1);	/* 1 is rsvd */
-	ASSERT(encoding < 16);
-	ASSERT(object_size > 0);
-
-	if (encoding == 0)	/* 32k deep */
-		encoding = 16;
-
-	return (1 << (encoding - 1)) * object_size;
-}
-
-static inline
-u32 be_ring_length_to_encoding(u32 length_in_bytes, u32 object_size)
-{
-
-	u32 count, encoding;
-
-	ASSERT(object_size > 0);
-	ASSERT(length_in_bytes % object_size == 0);
-
-	count = length_in_bytes / object_size;
-
-	ASSERT(count > 1);
-	ASSERT(count <= 32 * 1024);
-	ASSERT(length_in_bytes <= 8 * PAGE_SIZE); /* max ring size in UT */
-
-	encoding = __ilog2_u32(count) + 1;
-
-	if (encoding == 16)
-		encoding = 0;	/* 32k deep */
-
-	return encoding;
-}
-
-void be_rd_to_pa_list(struct ring_desc *rd, struct PHYS_ADDR *pa_list,
-						u32 max_num);
-#endif /* __hwlib_h__ */
diff --git a/drivers/staging/benet/mpu.c b/drivers/staging/benet/mpu.c
deleted file mode 100644
index 269cc11d305..00000000000
--- a/drivers/staging/benet/mpu.c
+++ /dev/null
@@ -1,1364 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include <linux/delay.h>
-#include "hwlib.h"
-#include "bestatus.h"
-
-static
-inline void mp_ring_create(struct mp_ring *ring, u32 num, u32 size, void *va)
-{
-	ASSERT(ring);
-	memset(ring, 0, sizeof(struct mp_ring));
-	ring->num = num;
-	ring->pages = DIV_ROUND_UP(num * size, PAGE_SIZE);
-	ring->itemSize = size;
-	ring->va = va;
-}
-
-/*
- * -----------------------------------------------------------------------
- * Interface for 2 index rings. i.e. consumer/producer rings
- * --------------------------------------------------------------------------
- */
-
-/* Returns number items pending on ring. */
-static inline u32 mp_ring_num_pending(struct mp_ring *ring)
-{
-	ASSERT(ring);
-	if (ring->num == 0)
-		return 0;
-	return be_subc(ring->pidx, ring->cidx, ring->num);
-}
-
-/* Returns number items free on ring. */
-static inline u32 mp_ring_num_empty(struct mp_ring *ring)
-{
-	ASSERT(ring);
-	return ring->num - 1 - mp_ring_num_pending(ring);
-}
-
-/* Consume 1 item */
-static inline void mp_ring_consume(struct mp_ring *ring)
-{
-	ASSERT(ring);
-	ASSERT(ring->pidx != ring->cidx);
-
-	ring->cidx = be_addc(ring->cidx, 1, ring->num);
-}
-
-/* Produce 1 item */
-static inline void mp_ring_produce(struct mp_ring *ring)
-{
-	ASSERT(ring);
-	ring->pidx = be_addc(ring->pidx, 1, ring->num);
-}
-
-/* Consume count items */
-static inline void mp_ring_consume_multiple(struct mp_ring *ring, u32 count)
-{
-	ASSERT(ring);
-	ASSERT(mp_ring_num_pending(ring) >= count);
-	ring->cidx = be_addc(ring->cidx, count, ring->num);
-}
-
-static inline void *mp_ring_item(struct mp_ring *ring, u32 index)
-{
-	ASSERT(ring);
-	ASSERT(index < ring->num);
-	ASSERT(ring->itemSize > 0);
-	return (u8 *) ring->va + index * ring->itemSize;
-}
-
-/* Ptr to produce item */
-static inline void *mp_ring_producer_ptr(struct mp_ring *ring)
-{
-	ASSERT(ring);
-	return mp_ring_item(ring, ring->pidx);
-}
-
-/*
- * Returns a pointer to the current location in the ring.
- * This is used for rings with 1 index.
- */
-static inline void *mp_ring_current(struct mp_ring *ring)
-{
-	ASSERT(ring);
-	ASSERT(ring->pidx == 0);	/* not used */
-
-	return mp_ring_item(ring, ring->cidx);
-}
-
-/*
- * Increment index for rings with only 1 index.
- * This is used for rings with 1 index.
- */
-static inline void *mp_ring_next(struct mp_ring *ring)
-{
-	ASSERT(ring);
-	ASSERT(ring->num > 0);
-	ASSERT(ring->pidx == 0);	/* not used */
-
-	ring->cidx = be_addc(ring->cidx, 1, ring->num);
-	return mp_ring_current(ring);
-}
-
-/*
-    This routine waits for a previously posted mailbox WRB to be completed.
-    Specifically it waits for the mailbox to say that it's ready to accept
-    more data by setting the LSB of the mailbox pd register to 1.
-
-    pcontroller      - The function object to post this data to
-
-    IRQL < DISPATCH_LEVEL
-*/
-static void be_mcc_mailbox_wait(struct be_function_object *pfob)
-{
-	struct MPU_MAILBOX_DB_AMAP mailbox_db;
-	u32 i = 0;
-	u32 ready;
-
-	if (pfob->emulate) {
-		/* No waiting for mailbox in emulated mode. */
-		return;
-	}
-
-	mailbox_db.dw[0] = PD_READ(pfob, mcc_bootstrap_db);
-	ready = AMAP_GET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db);
-
-	while (ready == false) {
-		if ((++i & 0x3FFFF) == 0) {
-			TRACE(DL_WARN, "Waiting for mailbox ready - %dk polls",
-								i / 1000);
-		}
-		udelay(1);
-		mailbox_db.dw[0] = PD_READ(pfob, mcc_bootstrap_db);
-		ready = AMAP_GET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db);
-	}
-}
-
-/*
-    This routine tells the MCC mailbox that there is data to processed
-    in the mailbox. It does this by setting the physical address for the
-    mailbox location and clearing the LSB.  This routine returns immediately
-    and does not wait for the WRB to be processed.
-
-    pcontroller      - The function object to post this data to
-
-    IRQL < DISPATCH_LEVEL
-
-*/
-static void be_mcc_mailbox_notify(struct be_function_object *pfob)
-{
-	struct MPU_MAILBOX_DB_AMAP mailbox_db;
-	u32 pa;
-
-	ASSERT(pfob->mailbox.pa);
-	ASSERT(pfob->mailbox.va);
-
-	/* If emulated, do not ring the mailbox */
-	if (pfob->emulate) {
-		TRACE(DL_WARN, "MPU disabled. Skipping mailbox notify.");
-		return;
-	}
-
-	/* form the higher bits in the address */
-	mailbox_db.dw[0] = 0;	/* init */
-	AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, hi, &mailbox_db, 1);
-	AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db, 0);
-
-	/* bits 34 to 63 */
-	pa = (u32) (pfob->mailbox.pa >> 34);
-	AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, address, &mailbox_db, pa);
-
-	/* Wait for the MPU to be ready */
-	be_mcc_mailbox_wait(pfob);
-
-	/* Ring doorbell 1st time */
-	PD_WRITE(pfob, mcc_bootstrap_db, mailbox_db.dw[0]);
-
-	/* Wait for 1st write to be acknowledged. */
-	be_mcc_mailbox_wait(pfob);
-
-	/* lower bits 30 bits from 4th bit (bits 4 to 33)*/
-	pa = (u32) (pfob->mailbox.pa >> 4) & 0x3FFFFFFF;
-
-	AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, hi, &mailbox_db, 0);
-	AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db, 0);
-	AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, address, &mailbox_db, pa);
-
-	/* Ring doorbell 2nd time */
-	PD_WRITE(pfob, mcc_bootstrap_db, mailbox_db.dw[0]);
-}
-
-/*
-    This routine tells the MCC mailbox that there is data to processed
-    in the mailbox. It does this by setting the physical address for the
-    mailbox location and clearing the LSB.  This routine spins until the
-    MPU writes a 1 into the LSB indicating that the data has been received
-    and is ready to be processed.
-
-    pcontroller      - The function object to post this data to
-
-    IRQL < DISPATCH_LEVEL
-*/
-static void
-be_mcc_mailbox_notify_and_wait(struct be_function_object *pfob)
-{
-	/*
-	 * Notify it
-	 */
-	be_mcc_mailbox_notify(pfob);
-	/*
-	 * Now wait for completion of WRB
-	 */
-	be_mcc_mailbox_wait(pfob);
-}
-
-void
-be_mcc_process_cqe(struct be_function_object *pfob,
-				struct MCC_CQ_ENTRY_AMAP *cqe)
-{
-	struct be_mcc_wrb_context *wrb_context = NULL;
-	u32 offset, status;
-	u8 *p;
-
-	ASSERT(cqe);
-	/*
-	 * A command completed.  Commands complete out-of-order.
-	 * Determine which command completed from the TAG.
-	 */
-	offset = offsetof(struct BE_MCC_CQ_ENTRY_AMAP, mcc_tag)/8;
-	p = (u8 *) cqe + offset;
-	wrb_context = (struct be_mcc_wrb_context *)(void *)(size_t)(*(u64 *)p);
-	ASSERT(wrb_context);
-
-	/*
-	 * Perform a response copy if requested.
-	 * Only copy data if the FWCMD is successful.
-	 */
-	status = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, completion_status, cqe);
-	if (status == MGMT_STATUS_SUCCESS && wrb_context->copy.length > 0) {
-		ASSERT(wrb_context->wrb);
-		ASSERT(wrb_context->copy.va);
-		p = (u8 *)wrb_context->wrb +
-				offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
-		memcpy(wrb_context->copy.va,
-			  (u8 *)p + wrb_context->copy.fwcmd_offset,
-			  wrb_context->copy.length);
-	}
-
-	if (status)
-		status = BE_NOT_OK;
-	/* internal callback */
-	if (wrb_context->internal_cb) {
-		wrb_context->internal_cb(wrb_context->internal_cb_context,
-						status, wrb_context->wrb);
-	}
-
-	/* callback */
-	if (wrb_context->cb) {
-		wrb_context->cb(wrb_context->cb_context,
-					      status, wrb_context->wrb);
-	}
-	/* Free the context structure */
-	_be_mcc_free_wrb_context(pfob, wrb_context);
-}
-
-void be_drive_mcc_wrb_queue(struct be_mcc_object *mcc)
-{
-	struct be_function_object *pfob = NULL;
-	int status = BE_PENDING;
-	struct be_generic_q_ctxt *q_ctxt;
-	struct MCC_WRB_AMAP *wrb;
-	struct MCC_WRB_AMAP *queue_wrb;
-	u32 length, payload_length, sge_count, embedded;
-	unsigned long irql;
-
-	BUILD_BUG_ON((sizeof(struct be_generic_q_ctxt) <
-			  sizeof(struct be_queue_driver_context) +
-					sizeof(struct MCC_WRB_AMAP)));
-	pfob = mcc->parent_function;
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	if (mcc->driving_backlog) {
-		spin_unlock_irqrestore(&pfob->post_lock, irql);
-		if (pfob->pend_queue_driving && pfob->mcc) {
-			pfob->pend_queue_driving = 0;
-			be_drive_mcc_wrb_queue(pfob->mcc);
-		}
-		return;
-	}
-	/* Acquire the flag to limit 1 thread to redrive posts. */
-	mcc->driving_backlog = 1;
-
-	while (!list_empty(&mcc->backlog)) {
-		wrb = _be_mpu_peek_ring_wrb(mcc, true);	/* Driving the queue */
-		if (!wrb)
-			break;	/* No space in the ring yet. */
-		/* Get the next queued entry to process. */
-		q_ctxt = list_first_entry(&mcc->backlog,
-				struct be_generic_q_ctxt, context.list);
-		list_del(&q_ctxt->context.list);
-		pfob->mcc->backlog_length--;
-		/*
-		 * Compute the required length of the WRB.
-		 * Since the queue element may be smaller than
-		 * the complete WRB, copy only the required number of bytes.
-		 */
-		queue_wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
-		embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, queue_wrb);
-		if (embedded) {
-			payload_length = AMAP_GET_BITS_PTR(MCC_WRB,
-						payload_length, queue_wrb);
-			length = sizeof(struct be_mcc_wrb_header) +
-								payload_length;
-		} else {
-			sge_count = AMAP_GET_BITS_PTR(MCC_WRB, sge_count,
-								queue_wrb);
-			ASSERT(sge_count == 1); /* only 1 frag. */
-			length = sizeof(struct be_mcc_wrb_header) +
-			    sge_count * sizeof(struct MCC_SGE_AMAP);
-		}
-
-		/*
-		 * Truncate the length based on the size of the
-		 * queue element.  Some elements that have output parameters
-		 * can be smaller than the payload_length field would
-		 * indicate.  We really only need to copy the request
-		 * parameters, not the response.
-		 */
-		length = min(length, (u32) (q_ctxt->context.bytes -
-			offsetof(struct be_generic_q_ctxt, wrb_header)));
-
-		/* Copy the queue element WRB into the ring. */
-		memcpy(wrb, &q_ctxt->wrb_header, length);
-
-		/* Post the wrb.  This should not fail assuming we have
-		 * enough context structs. */
-		status = be_function_post_mcc_wrb(pfob, wrb, NULL,
-			   q_ctxt->context.cb, q_ctxt->context.cb_context,
-			   q_ctxt->context.internal_cb,
-			   q_ctxt->context.internal_cb_context,
-			   q_ctxt->context.optional_fwcmd_va,
-			   &q_ctxt->context.copy);
-
-		if (status == BE_SUCCESS) {
-			/*
-			 * Synchronous completion. Since it was queued,
-			 * we will invoke the callback.
-			 * To the user, this is an asynchronous request.
-			 */
-			spin_unlock_irqrestore(&pfob->post_lock, irql);
-			if (pfob->pend_queue_driving && pfob->mcc) {
-				pfob->pend_queue_driving = 0;
-				be_drive_mcc_wrb_queue(pfob->mcc);
-			}
-
-			ASSERT(q_ctxt->context.cb);
-
-			q_ctxt->context.cb(
-				q_ctxt->context.cb_context,
-						BE_SUCCESS, NULL);
-
-			spin_lock_irqsave(&pfob->post_lock, irql);
-
-		} else if (status != BE_PENDING) {
-			/*
-			 * Another resource failed.  Should never happen
-			 * if we have sufficient MCC_WRB_CONTEXT structs.
-			 * Return to head of the queue.
-			 */
-			TRACE(DL_WARN, "Failed to post a queued WRB. 0x%x",
-			      status);
-			list_add(&q_ctxt->context.list, &mcc->backlog);
-			pfob->mcc->backlog_length++;
-			break;
-		}
-	}
-
-	/* Free the flag to limit 1 thread to redrive posts. */
-	mcc->driving_backlog = 0;
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-}
-
-/* This function asserts that the WRB was consumed in order. */
-#ifdef BE_DEBUG
-u32 be_mcc_wrb_consumed_in_order(struct be_mcc_object *mcc,
-					struct MCC_CQ_ENTRY_AMAP *cqe)
-{
-	struct be_mcc_wrb_context *wrb_context = NULL;
-	u32 wrb_index;
-	u32 wrb_consumed_in_order;
-	u32 offset;
-	u8 *p;
-
-	ASSERT(cqe);
-	/*
-	 * A command completed.  Commands complete out-of-order.
-	 * Determine which command completed from the TAG.
-	 */
-	offset = offsetof(struct BE_MCC_CQ_ENTRY_AMAP, mcc_tag)/8;
-	p = (u8 *) cqe + offset;
-	wrb_context = (struct be_mcc_wrb_context *)(void *)(size_t)(*(u64 *)p);
-
-	ASSERT(wrb_context);
-
-	wrb_index = (u32) (((u64)(size_t)wrb_context->ring_wrb -
-		(u64)(size_t)mcc->sq.ring.va) / sizeof(struct MCC_WRB_AMAP));
-
-	ASSERT(wrb_index < mcc->sq.ring.num);
-
-	wrb_consumed_in_order = (u32) (wrb_index == mcc->consumed_index);
-	mcc->consumed_index = be_addc(mcc->consumed_index, 1, mcc->sq.ring.num);
-	return wrb_consumed_in_order;
-}
-#endif
-
-int be_mcc_process_cq(struct be_mcc_object *mcc, bool rearm)
-{
-	struct be_function_object *pfob = NULL;
-	struct MCC_CQ_ENTRY_AMAP *cqe;
-	struct CQ_DB_AMAP db;
-	struct mp_ring *cq_ring = &mcc->cq.ring;
-	struct mp_ring *mp_ring = &mcc->sq.ring;
-	u32 num_processed = 0;
-	u32 consumed = 0, valid, completed, cqe_consumed, async_event;
-
-	pfob = mcc->parent_function;
-
-	spin_lock_irqsave(&pfob->cq_lock, pfob->cq_irq);
-
-	/*
-	 * Verify that only one thread is processing the CQ at once.
-	 * We cannot hold the lock while processing the CQ due to
-	 * the callbacks into the OS.  Therefore, this flag is used
-	 * to control it.  If any of the threads want to
-	 * rearm the CQ, we need to honor that.
-	 */
-	if (mcc->processing != 0) {
-		mcc->rearm = mcc->rearm || rearm;
-		goto Error;
-	} else {
-		mcc->processing = 1;	/* lock processing for this thread. */
-		mcc->rearm = rearm;	/* set our rearm setting */
-	}
-
-	spin_unlock_irqrestore(&pfob->cq_lock, pfob->cq_irq);
-
-	cqe = mp_ring_current(cq_ring);
-	valid = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe);
-	while (valid) {
-
-		if (num_processed >= 8) {
-			/* coalesce doorbells, but free space in cq
-			 * ring while processing. */
-			db.dw[0] = 0;	/* clear */
-			AMAP_SET_BITS_PTR(CQ_DB, qid, &db, cq_ring->id);
-			AMAP_SET_BITS_PTR(CQ_DB, rearm, &db, false);
-			AMAP_SET_BITS_PTR(CQ_DB, event, &db, false);
-			AMAP_SET_BITS_PTR(CQ_DB, num_popped, &db,
-							num_processed);
-			num_processed = 0;
-
-			PD_WRITE(pfob, cq_db, db.dw[0]);
-		}
-
-		async_event = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, async_event, cqe);
-		if (async_event) {
-			/* This is an asynchronous event. */
-			struct ASYNC_EVENT_TRAILER_AMAP *async_trailer =
-			    (struct ASYNC_EVENT_TRAILER_AMAP *)
-			    ((u8 *) cqe + sizeof(struct MCC_CQ_ENTRY_AMAP) -
-			     sizeof(struct ASYNC_EVENT_TRAILER_AMAP));
-			u32 event_code;
-			async_event = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
-						async_event, async_trailer);
-			ASSERT(async_event == 1);
-
-
-			valid = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
-						valid, async_trailer);
-			ASSERT(valid == 1);
-
-			/* Call the async event handler if it is installed. */
-			if (mcc->async_cb) {
-				event_code =
-					AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
-						event_code, async_trailer);
-				mcc->async_cb(mcc->async_context,
-					    (u32) event_code, (void *) cqe);
-			}
-
-		} else {
-			/* This is a completion entry. */
-
-			/* No vm forwarding in this driver. */
-
-			cqe_consumed = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY,
-						consumed, cqe);
-			if (cqe_consumed) {
-				/*
-				 * A command on the MCC ring was consumed.
-				 * Update the consumer index.
-				 * These occur in order.
-				 */
-				ASSERT(be_mcc_wrb_consumed_in_order(mcc, cqe));
-				consumed++;
-			}
-
-			completed = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY,
-					completed, cqe);
-			if (completed) {
-				/* A command completed.  Use tag to
-				 * determine which command.  */
-				be_mcc_process_cqe(pfob, cqe);
-			}
-		}
-
-		/* Reset the CQE */
-		AMAP_SET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe, false);
-		num_processed++;
-
-		/* Update our tracking for the CQ ring. */
-		cqe = mp_ring_next(cq_ring);
-		valid = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe);
-	}
-
-	TRACE(DL_INFO, "num_processed:0x%x, and consumed:0x%x",
-	      num_processed, consumed);
-	/*
-	 * Grab the CQ lock to synchronize the "rearm" setting for
-	 * the doorbell, and for clearing the "processing" flag.
-	 */
-	spin_lock_irqsave(&pfob->cq_lock, pfob->cq_irq);
-
-	/*
-	 * Rearm the cq.  This is done based on the global mcc->rearm
-	 * flag which combines the rearm parameter from the current
-	 * call to process_cq and any other threads
-	 * that tried to process the CQ while this one was active.
-	 * This handles the situation where a sync. fwcmd was processing
-	 * the CQ while the interrupt/dpc tries to process it.
-	 * The sync process gets to continue -- but it is now
-	 * responsible for the rearming.
-	 */
-	if (num_processed > 0 || mcc->rearm == true) {
-		db.dw[0] = 0;	/* clear */
-		AMAP_SET_BITS_PTR(CQ_DB, qid, &db, cq_ring->id);
-		AMAP_SET_BITS_PTR(CQ_DB, rearm, &db, mcc->rearm);
-		AMAP_SET_BITS_PTR(CQ_DB, event, &db, false);
-		AMAP_SET_BITS_PTR(CQ_DB, num_popped, &db, num_processed);
-
-		PD_WRITE(pfob, cq_db, db.dw[0]);
-	}
-	/*
-	 * Update the consumer index after ringing the CQ doorbell.
-	 * We don't want another thread to post more WRBs before we
-	 * have CQ space available.
-	 */
-	mp_ring_consume_multiple(mp_ring, consumed);
-
-	/* Clear the processing flag. */
-	mcc->processing = 0;
-
-Error:
-	spin_unlock_irqrestore(&pfob->cq_lock, pfob->cq_irq);
-	/*
-	 * Use the local variable to detect if the current thread
-	 * holds the WRB post lock.  If rearm is false, this is
-	 * either a synchronous command, or the upper layer driver is polling
-	 * from a thread.  We do not drive the queue from that
-	 * context since the driver may hold the
-	 * wrb post lock already.
-	 */
-	if (rearm)
-		be_drive_mcc_wrb_queue(mcc);
-	else
-		pfob->pend_queue_driving = 1;
-
-	return BE_SUCCESS;
-}
-
-/*
- *============================================================================
- *                  P U B L I C  R O U T I N E S
- *============================================================================
- */
-
-/*
-    This routine creates an MCC object.  This object contains an MCC send queue
-    and a CQ private to the MCC.
-
-    pcontroller      - Handle to a function object
-
-    EqObject            - EQ object that will be used to dispatch this MCC
-
-    ppMccObject         - Pointer to an internal Mcc Object returned.
-
-    Returns BE_SUCCESS if successfull,, otherwise a useful error code
-	is returned.
-
-    IRQL < DISPATCH_LEVEL
-
-*/
-int
-be_mcc_ring_create(struct be_function_object *pfob,
-		   struct ring_desc *rd, u32 length,
-		   struct be_mcc_wrb_context *context_array,
-		   u32 num_context_entries,
-		   struct be_cq_object *cq, struct be_mcc_object *mcc)
-{
-	int status = 0;
-
-	struct FWCMD_COMMON_MCC_CREATE *fwcmd = NULL;
-	struct MCC_WRB_AMAP *wrb = NULL;
-	u32 num_entries_encoded, n, i;
-	void *va = NULL;
-	unsigned long irql;
-
-	if (length < sizeof(struct MCC_WRB_AMAP) * 2) {
-		TRACE(DL_ERR, "Invalid MCC ring length:%d", length);
-		return BE_NOT_OK;
-	}
-	/*
-	 * Reduce the actual ring size to be less than the number
-	 * of context entries.  This ensures that we run out of
-	 * ring WRBs first so the queuing works correctly.  We never
-	 * queue based on context structs.
-	 */
-	if (num_context_entries + 1 <
-			length / sizeof(struct MCC_WRB_AMAP) - 1) {
-
-		u32 max_length =
-		    (num_context_entries + 2) * sizeof(struct MCC_WRB_AMAP);
-
-		if (is_power_of_2(max_length))
-			length = __roundup_pow_of_two(max_length+1) / 2;
-		else
-			length = __roundup_pow_of_two(max_length) / 2;
-
-		ASSERT(length <= max_length);
-
-		TRACE(DL_WARN,
-			"MCC ring length reduced based on context entries."
-			" length:%d wrbs:%d context_entries:%d", length,
-			(int) (length / sizeof(struct MCC_WRB_AMAP)),
-			num_context_entries);
-	}
-
-	spin_lock_irqsave(&pfob->post_lock, irql);
-
-	num_entries_encoded =
-	    be_ring_length_to_encoding(length, sizeof(struct MCC_WRB_AMAP));
-
-	/* Init MCC object. */
-	memset(mcc, 0, sizeof(*mcc));
-	mcc->parent_function = pfob;
-	mcc->cq_object = cq;
-
-	INIT_LIST_HEAD(&mcc->backlog);
-
-	wrb = be_function_peek_mcc_wrb(pfob);
-	if (!wrb) {
-		ASSERT(wrb);
-		TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
-		status = BE_STATUS_NO_MCC_WRB;
-		goto error;
-	}
-	/* Prepares an embedded fwcmd, including request/response sizes. */
-	fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_MCC_CREATE);
-
-	fwcmd->params.request.num_pages = DIV_ROUND_UP(length, PAGE_SIZE);
-	/*
-	 * Program MCC ring context
-	 */
-	AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, pdid,
-			&fwcmd->params.request.context, 0);
-	AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, invalid,
-			&fwcmd->params.request.context, false);
-	AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, ring_size,
-			&fwcmd->params.request.context, num_entries_encoded);
-
-	n = cq->cq_id;
-	AMAP_SET_BITS_PTR(MCC_RING_CONTEXT,
-				cq_id, &fwcmd->params.request.context, n);
-	be_rd_to_pa_list(rd, fwcmd->params.request.pages,
-				ARRAY_SIZE(fwcmd->params.request.pages));
-	/* Post the f/w command */
-	status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
-						NULL, NULL, fwcmd, NULL);
-	if (status != BE_SUCCESS) {
-		TRACE(DL_ERR, "MCC to create CQ failed.");
-		goto error;
-	}
-	/*
-	 * Create a linked list of context structures
-	 */
-	mcc->wrb_context.base = context_array;
-	mcc->wrb_context.num = num_context_entries;
-	INIT_LIST_HEAD(&mcc->wrb_context.list_head);
-	memset(context_array, 0,
-		    sizeof(struct be_mcc_wrb_context) * num_context_entries);
-	for (i = 0; i < mcc->wrb_context.num; i++) {
-		list_add_tail(&context_array[i].next,
-					&mcc->wrb_context.list_head);
-	}
-
-	/*
-	 *
-	 * Create an mcc_ring for tracking WRB hw ring
-	 */
-	va = rd->va;
-	ASSERT(va);
-	mp_ring_create(&mcc->sq.ring, length / sizeof(struct MCC_WRB_AMAP),
-				sizeof(struct MCC_WRB_AMAP), va);
-	mcc->sq.ring.id = fwcmd->params.response.id;
-	/*
-	 * Init a mcc_ring for tracking the MCC CQ.
-	 */
-	ASSERT(cq->va);
-	mp_ring_create(&mcc->cq.ring, cq->num_entries,
-		       sizeof(struct MCC_CQ_ENTRY_AMAP), cq->va);
-	mcc->cq.ring.id = cq->cq_id;
-
-	/* Force zeroing of CQ. */
-	memset(cq->va, 0, cq->num_entries * sizeof(struct MCC_CQ_ENTRY_AMAP));
-
-	/* Initialize debug index. */
-	mcc->consumed_index = 0;
-
-	atomic_inc(&cq->ref_count);
-	pfob->mcc = mcc;
-
-	TRACE(DL_INFO, "MCC ring created. id:%d bytes:%d cq_id:%d cq_entries:%d"
-	      " num_context:%d", mcc->sq.ring.id, length,
-	      cq->cq_id, cq->num_entries, num_context_entries);
-
-error:
-	spin_unlock_irqrestore(&pfob->post_lock, irql);
-	if (pfob->pend_queue_driving && pfob->mcc) {
-		pfob->pend_queue_driving = 0;
-		be_drive_mcc_wrb_queue(pfob->mcc);
-	}
-	return status;
-}
-
-/*
-    This routine destroys an MCC send queue
-
-    MccObject         - Internal Mcc Object to be destroyed.
-
-    Returns BE_SUCCESS if successfull, otherwise an error code is returned.
-
-    IRQL < DISPATCH_LEVEL
-
-    The caller of this routine must ensure that no other WRB may be posted
-    until this routine returns.
-
-*/
-int be_mcc_ring_destroy(struct be_mcc_object *mcc)
-{
-	int status = 0;
-	struct be_function_object *pfob = mcc->parent_function;
-
-
-	ASSERT(mcc->processing == 0);
-
-	/*
-	 * Remove the ring from the function object.
-	 * This transitions back to mailbox mode.
-	 */
-	pfob->mcc = NULL;
-
-	/* Send fwcmd to destroy the queue.  (Using the mailbox.) */
-	status = be_function_ring_destroy(mcc->parent_function, mcc->sq.ring.id,
-			     FWCMD_RING_TYPE_MCC, NULL, NULL, NULL, NULL);
-	ASSERT(status == 0);
-
-	/* Release the SQ reference to the CQ */
-	atomic_dec(&mcc->cq_object->ref_count);
-
-	return status;
-}
-
-static void
-mcc_wrb_sync_cb(void *context, int staus, struct MCC_WRB_AMAP *wrb)
-{
-	struct be_mcc_wrb_context *wrb_context =
-				(struct be_mcc_wrb_context *) context;
-	ASSERT(wrb_context);
-	*wrb_context->users_final_status = staus;
-}
-
-/*
-    This routine posts a command to the MCC send queue
-
-    mcc       - Internal Mcc Object to be destroyed.
-
-    wrb             - wrb to post.
-
-    Returns BE_SUCCESS if successfull, otherwise an error code is returned.
-
-    IRQL < DISPATCH_LEVEL if CompletionCallback is not NULL
-    IRQL <=DISPATCH_LEVEL if CompletionCallback is  NULL
-
-    If this routine is called with CompletionCallback != NULL the
-    call is considered to be asynchronous and will return as soon
-    as the WRB is posted to the MCC with BE_PENDING.
-
-    If CompletionCallback is NULL, then this routine will not return until
-    a completion for this MCC command has been processed.
-    If called at DISPATCH_LEVEL the CompletionCallback must be NULL.
-
-    This routine should only be called if the MPU has been boostraped past
-    mailbox mode.
-
-
-*/
-int
-_be_mpu_post_wrb_ring(struct be_mcc_object *mcc, struct MCC_WRB_AMAP *wrb,
-				struct be_mcc_wrb_context *wrb_context)
-{
-
-	struct MCC_WRB_AMAP *ring_wrb = NULL;
-	int status = BE_PENDING;
-	int final_status = BE_PENDING;
-	mcc_wrb_cqe_callback cb = NULL;
-	struct MCC_DB_AMAP mcc_db;
-	u32 embedded;
-
-	ASSERT(mp_ring_num_empty(&mcc->sq.ring) > 0);
-	/*
-	 * Input wrb is most likely the next wrb in the ring, since the client
-	 * can peek at the address.
-	 */
-	ring_wrb = mp_ring_producer_ptr(&mcc->sq.ring);
-	if (wrb != ring_wrb) {
-		/* If not equal, copy it into the ring. */
-		memcpy(ring_wrb, wrb, sizeof(struct MCC_WRB_AMAP));
-	}
-#ifdef BE_DEBUG
-	wrb_context->ring_wrb = ring_wrb;
-#endif
-	embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, ring_wrb);
-	if (embedded) {
-		/* embedded commands will have the response within the WRB. */
-		wrb_context->wrb = ring_wrb;
-	} else {
-		/*
-		 * non-embedded commands will not have the response
-		 * within the WRB, and they may complete out-of-order.
-		 * The WRB will not be valid to inspect
-		 * during the completion.
-		 */
-		wrb_context->wrb = NULL;
-	}
-	cb = wrb_context->cb;
-
-	if (cb == NULL) {
-		/* Assign our internal callback if this is a
-		 * synchronous call. */
-		wrb_context->cb = mcc_wrb_sync_cb;
-		wrb_context->cb_context = wrb_context;
-		wrb_context->users_final_status = &final_status;
-	}
-	/* Increment producer index */
-
-	mcc_db.dw[0] = 0;		/* initialize */
-	AMAP_SET_BITS_PTR(MCC_DB, rid, &mcc_db, mcc->sq.ring.id);
-	AMAP_SET_BITS_PTR(MCC_DB, numPosted, &mcc_db, 1);
-
-	mp_ring_produce(&mcc->sq.ring);
-	PD_WRITE(mcc->parent_function, mpu_mcc_db, mcc_db.dw[0]);
-	TRACE(DL_INFO, "pidx: %x and cidx: %x.", mcc->sq.ring.pidx,
-	      mcc->sq.ring.cidx);
-
-	if (cb == NULL) {
-		int polls = 0;	/* At >= 1 us per poll   */
-		/* Wait until this command completes, polling the CQ. */
-		do {
-			TRACE(DL_INFO, "FWCMD submitted in the poll mode.");
-			/* Do not rearm CQ in this context. */
-			be_mcc_process_cq(mcc, false);
-
-			if (final_status == BE_PENDING) {
-				if ((++polls & 0x7FFFF) == 0) {
-					TRACE(DL_WARN,
-					      "Warning : polling MCC CQ for %d"
-					      "ms.", polls / 1000);
-				}
-
-				udelay(1);
-			}
-
-			/* final_status changed when the command completes */
-		} while (final_status == BE_PENDING);
-
-		status = final_status;
-	}
-
-	return status;
-}
-
-struct MCC_WRB_AMAP *
-_be_mpu_peek_ring_wrb(struct be_mcc_object *mcc, bool driving_queue)
-{
-	/* If we have queued items, do not allow a post to bypass the queue. */
-	if (!driving_queue && !list_empty(&mcc->backlog))
-		return NULL;
-
-	if (mp_ring_num_empty(&mcc->sq.ring) <= 0)
-		return NULL;
-	return (struct MCC_WRB_AMAP *) mp_ring_producer_ptr(&mcc->sq.ring);
-}
-
-int
-be_mpu_init_mailbox(struct be_function_object *pfob, struct ring_desc *mailbox)
-{
-	ASSERT(mailbox);
-	pfob->mailbox.va = mailbox->va;
-	pfob->mailbox.pa =  cpu_to_le64(mailbox->pa);
-	pfob->mailbox.length = mailbox->length;
-
-	ASSERT(((u32)(size_t)pfob->mailbox.va & 0xf) == 0);
-	ASSERT(((u32)(size_t)pfob->mailbox.pa & 0xf) == 0);
-	/*
-	 * Issue the WRB to set MPU endianness
-	 */
-	{
-		u64 *endian_check = (u64 *) (pfob->mailbox.va +
-				offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8);
-		*endian_check = 0xFF1234FFFF5678FFULL;
-	}
-
-	be_mcc_mailbox_notify_and_wait(pfob);
-
-	return BE_SUCCESS;
-}
-
-
-/*
-    This routine posts a command to the MCC mailbox.
-
-    FuncObj         - Function Object to post the WRB on behalf of.
-    wrb             - wrb to post.
-    CompletionCallback  - Address of a callback routine to invoke once the WRB
-				is completed.
-    CompletionCallbackContext - Opaque context to be passed during the call to
-				the CompletionCallback.
-    Returns BE_SUCCESS if successfull, otherwise an error code is returned.
-
-    IRQL <=DISPATCH_LEVEL if CompletionCallback is  NULL
-
-    This routine will block until a completion for this MCC command has been
-    processed. If called at DISPATCH_LEVEL the CompletionCallback must be NULL.
-
-    This routine should only be called if the MPU has not been boostraped past
-    mailbox mode.
-*/
-int
-_be_mpu_post_wrb_mailbox(struct be_function_object *pfob,
-	 struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context)
-{
-	struct MCC_MAILBOX_AMAP *mailbox = NULL;
-	struct MCC_WRB_AMAP *mb_wrb;
-	struct MCC_CQ_ENTRY_AMAP *mb_cq;
-	u32 offset, status;
-
-	ASSERT(pfob->mcc == NULL);
-	mailbox = pfob->mailbox.va;
-	ASSERT(mailbox);
-
-	offset = offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8;
-	mb_wrb = (struct MCC_WRB_AMAP *) (u8 *)mailbox + offset;
-	if (mb_wrb != wrb) {
-		memset(mailbox, 0, sizeof(*mailbox));
-		memcpy(mb_wrb, wrb, sizeof(struct MCC_WRB_AMAP));
-	}
-	/* The callback can inspect the final WRB to get output parameters. */
-	wrb_context->wrb = mb_wrb;
-
-	be_mcc_mailbox_notify_and_wait(pfob);
-
-	/* A command completed.  Use tag to determine which command. */
-	offset = offsetof(struct BE_MCC_MAILBOX_AMAP, cq)/8;
-	mb_cq = (struct MCC_CQ_ENTRY_AMAP *) ((u8 *)mailbox + offset);
-	be_mcc_process_cqe(pfob, mb_cq);
-
-	status = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, completion_status, mb_cq);
-	if (status)
-		status = BE_NOT_OK;
-	return status;
-}
-
-struct be_mcc_wrb_context *
-_be_mcc_allocate_wrb_context(struct be_function_object *pfob)
-{
-	struct be_mcc_wrb_context *context = NULL;
-	unsigned long irq;
-
-	spin_lock_irqsave(&pfob->mcc_context_lock, irq);
-
-	if (!pfob->mailbox.default_context_allocated) {
-		/* Use the single default context that we
-		 * always have allocated. */
-		pfob->mailbox.default_context_allocated = true;
-		context = &pfob->mailbox.default_context;
-	} else if (pfob->mcc) {
-		/* Get a context from the free list. If any are available. */
-		if (!list_empty(&pfob->mcc->wrb_context.list_head)) {
-			context = list_first_entry(
-				&pfob->mcc->wrb_context.list_head,
-					 struct be_mcc_wrb_context, next);
-		}
-	}
-
-	spin_unlock_irqrestore(&pfob->mcc_context_lock, irq);
-
-	return context;
-}
-
-void
-_be_mcc_free_wrb_context(struct be_function_object *pfob,
-			 struct be_mcc_wrb_context *context)
-{
-	unsigned long irq;
-
-	ASSERT(context);
-	/*
-	 * Zero during free to try and catch any bugs where the context
-	 * is accessed after a free.
-	 */
-	memset(context, 0, sizeof(context));
-
-	spin_lock_irqsave(&pfob->mcc_context_lock, irq);
-
-	if (context == &pfob->mailbox.default_context) {
-		/* Free the default context. */
-		ASSERT(pfob->mailbox.default_context_allocated);
-		pfob->mailbox.default_context_allocated = false;
-	} else {
-		/* Add to free list. */
-		ASSERT(pfob->mcc);
-		list_add_tail(&context->next,
-				&pfob->mcc->wrb_context.list_head);
-	}
-
-	spin_unlock_irqrestore(&pfob->mcc_context_lock, irq);
-}
-
-int
-be_mcc_add_async_event_callback(struct be_mcc_object *mcc_object,
-		mcc_async_event_callback cb, void *cb_context)
-{
-	/* Lock against anyone trying to change the callback/context pointers
-	 * while being used. */
-	spin_lock_irqsave(&mcc_object->parent_function->cq_lock,
-		mcc_object->parent_function->cq_irq);
-
-	/* Assign the async callback. */
-	mcc_object->async_context = cb_context;
-	mcc_object->async_cb = cb;
-
-	spin_unlock_irqrestore(&mcc_object->parent_function->cq_lock,
-					mcc_object->parent_function->cq_irq);
-
-	return BE_SUCCESS;
-}
-
-#define MPU_EP_CONTROL 0
-#define MPU_EP_SEMAPHORE 0xac
-
-/*
- *-------------------------------------------------------------------
- * Function: be_wait_for_POST_complete
- *   Waits until the BladeEngine POST completes (either in error or success).
- * pfob -
- * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
- *-------------------------------------------------------------------
- */
-static int be_wait_for_POST_complete(struct be_function_object *pfob)
-{
-	struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
-	int s;
-	u32 post_error, post_stage;
-
-	const u32 us_per_loop = 1000;	/* 1000us */
-	const u32 print_frequency_loops = 1000000 / us_per_loop;
-	const u32 max_loops = 60 * print_frequency_loops;
-	u32 loops = 0;
-
-	/*
-	 * Wait for arm fw indicating it is done or a fatal error happened.
-	 * Note: POST can take some time to complete depending on configuration
-	 * settings (consider ARM attempts to acquire an IP address
-	 * over DHCP!!!).
-	 *
-	 */
-	do {
-		status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
-		post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
-						error, &status);
-		post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
-						stage, &status);
-		if (0 == (loops % print_frequency_loops)) {
-			/* Print current status */
-			TRACE(DL_INFO, "POST status = 0x%x (stage = 0x%x)",
-				status.dw[0], post_stage);
-		}
-		udelay(us_per_loop);
-	} while ((post_error != 1) &&
-		 (post_stage != POST_STAGE_ARMFW_READY) &&
-		 (++loops < max_loops));
-
-	if (post_error == 1) {
-		TRACE(DL_ERR, "POST error! Status = 0x%x (stage = 0x%x)",
-		      status.dw[0], post_stage);
-		s = BE_NOT_OK;
-	} else if (post_stage != POST_STAGE_ARMFW_READY) {
-		TRACE(DL_ERR, "POST time-out! Status = 0x%x (stage = 0x%x)",
-		      status.dw[0], post_stage);
-		s = BE_NOT_OK;
-	} else {
-		s = BE_SUCCESS;
-	}
-	return s;
-}
-
-/*
- *-------------------------------------------------------------------
- * Function: be_kickoff_and_wait_for_POST
- *   Interacts with the BladeEngine management processor to initiate POST, and
- *   subsequently waits until POST completes (either in error or success).
- *   The caller must acquire the reset semaphore before initiating POST
- *   to prevent multiple drivers interacting with the management processor.
- *   Once POST is complete the caller must release the reset semaphore.
- *   Callers who only want to wait for POST complete may call
- *   be_wait_for_POST_complete.
- * pfob -
- * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
- *-------------------------------------------------------------------
- */
-static int
-be_kickoff_and_wait_for_POST(struct be_function_object *pfob)
-{
-	struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
-	int s;
-
-	const u32 us_per_loop = 1000;	/* 1000us */
-	const u32 print_frequency_loops = 1000000 / us_per_loop;
-	const u32 max_loops = 5 * print_frequency_loops;
-	u32 loops = 0;
-	u32 post_error, post_stage;
-
-	/* Wait for arm fw awaiting host ready or a fatal error happened. */
-	TRACE(DL_INFO, "Wait for BladeEngine ready to POST");
-	do {
-		status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
-		post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
-						error, &status);
-		post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
-						stage, &status);
-		if (0 == (loops % print_frequency_loops)) {
-			/* Print current status */
-			TRACE(DL_INFO, "POST status = 0x%x (stage = 0x%x)",
-			      status.dw[0], post_stage);
-		}
-		udelay(us_per_loop);
-	} while ((post_error != 1) &&
-		 (post_stage < POST_STAGE_AWAITING_HOST_RDY) &&
-		 (++loops < max_loops));
-
-	if (post_error == 1) {
-		TRACE(DL_ERR, "Pre-POST error! Status = 0x%x (stage = 0x%x)",
-		      status.dw[0], post_stage);
-		s = BE_NOT_OK;
-	} else if (post_stage == POST_STAGE_AWAITING_HOST_RDY) {
-		iowrite32(POST_STAGE_HOST_RDY, pfob->csr_va + MPU_EP_SEMAPHORE);
-
-		/* Wait for POST to complete */
-		s = be_wait_for_POST_complete(pfob);
-	} else {
-		/*
-		 * Either a timeout waiting for host ready signal or POST has
-		 * moved ahead without requiring a host ready signal.
-		 * Might as well give POST a chance to complete
-		 * (or timeout again).
-		 */
-		s = be_wait_for_POST_complete(pfob);
-	}
-	return s;
-}
-
-/*
- *-------------------------------------------------------------------
- * Function: be_pci_soft_reset
- *   This function is called to issue a BladeEngine soft reset.
- *   Callers should acquire the soft reset semaphore before calling this
- *   function. Additionaly, callers should ensure they cannot be pre-empted
- *   while the routine executes. Upon completion of this routine, callers
- *   should release the reset semaphore. This routine implicitly waits
- *   for BladeEngine POST to complete.
- * pfob -
- * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
- *-------------------------------------------------------------------
- */
-int be_pci_soft_reset(struct be_function_object *pfob)
-{
-	struct PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
-	struct PCICFG_ONLINE0_CSR_AMAP pciOnline0;
-	struct PCICFG_ONLINE1_CSR_AMAP pciOnline1;
-	struct EP_CONTROL_CSR_AMAP epControlCsr;
-	int status = BE_SUCCESS;
-	u32 i, soft_reset_bit;
-
-	TRACE(DL_NOTE, "PCI reset...");
-
-	/* Issue soft reset #1 to get BladeEngine into a known state. */
-	soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
-	AMAP_SET_BITS_PTR(PCICFG_SOFT_RESET_CSR, softreset, soft_reset.dw, 1);
-	PCICFG0_WRITE(pfob, host_timer_int_ctrl, soft_reset.dw[0]);
-	/*
-	 * wait til soft reset is deasserted - hardware
-	 * deasserts after some time.
-	 */
-	i = 0;
-	do {
-		udelay(50);
-		soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
-		soft_reset_bit = AMAP_GET_BITS_PTR(PCICFG_SOFT_RESET_CSR,
-					softreset, soft_reset.dw);
-	} while (soft_reset_bit  && (i++ < 1024));
-	if (soft_reset_bit != 0) {
-		TRACE(DL_ERR, "Soft-reset #1 did not deassert as expected.");
-		status = BE_NOT_OK;
-		goto Error_label;
-	}
-	/* Mask everything  */
-	PCICFG0_WRITE(pfob, ue_status_low_mask, 0xFFFFFFFF);
-	PCICFG0_WRITE(pfob, ue_status_hi_mask, 0xFFFFFFFF);
-	/*
-	 * Set everything offline except MPU IRAM (it is offline with
-	 * the soft-reset, but soft-reset does not reset the PCICFG registers!)
-	 */
-	pciOnline0.dw[0] = 0;
-	pciOnline1.dw[0] = 0;
-	AMAP_SET_BITS_PTR(PCICFG_ONLINE1_CSR, mpu_iram_online,
-				pciOnline1.dw, 1);
-	PCICFG0_WRITE(pfob, online0, pciOnline0.dw[0]);
-	PCICFG0_WRITE(pfob, online1, pciOnline1.dw[0]);
-
-	udelay(20000);
-
-	/* Issue soft reset #2. */
-	AMAP_SET_BITS_PTR(PCICFG_SOFT_RESET_CSR, softreset, soft_reset.dw, 1);
-	PCICFG0_WRITE(pfob, host_timer_int_ctrl, soft_reset.dw[0]);
-	/*
-	 * wait til soft reset is deasserted - hardware
-	 * deasserts after some time.
-	 */
-	i = 0;
-	do {
-		udelay(50);
-		soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
-		soft_reset_bit = AMAP_GET_BITS_PTR(PCICFG_SOFT_RESET_CSR,
-					softreset, soft_reset.dw);
-	} while (soft_reset_bit  && (i++ < 1024));
-	if (soft_reset_bit != 0) {
-		TRACE(DL_ERR, "Soft-reset #1 did not deassert as expected.");
-		status = BE_NOT_OK;
-		goto Error_label;
-	}
-
-
-	udelay(20000);
-
-	/* Take MPU out of reset. */
-
-	epControlCsr.dw[0] = ioread32(pfob->csr_va + MPU_EP_CONTROL);
-	AMAP_SET_BITS_PTR(EP_CONTROL_CSR, CPU_reset, &epControlCsr, 0);
-	iowrite32((u32)epControlCsr.dw[0], pfob->csr_va + MPU_EP_CONTROL);
-
-	/* Kickoff BE POST and wait for completion */
-	status = be_kickoff_and_wait_for_POST(pfob);
-
-Error_label:
-	return status;
-}
-
-
-/*
- *-------------------------------------------------------------------
- * Function: be_pci_reset_required
- *   This private function is called to detect if a host entity is
- *   required to issue a PCI soft reset and subsequently drive
- *   BladeEngine POST. Scenarios where this is required:
- *   1) BIOS-less configuration
- *   2) Hot-swap/plug/power-on
- * pfob -
- * return   true if a reset is required, false otherwise
- *-------------------------------------------------------------------
- */
-static bool be_pci_reset_required(struct be_function_object *pfob)
-{
-	struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
-	bool do_reset = false;
-	u32 post_error, post_stage;
-
-	/*
-	 * Read the POST status register
-	 */
-	status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
-	post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT, error,
-								&status);
-	post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT, stage,
-								&status);
-	if (post_stage <= POST_STAGE_AWAITING_HOST_RDY) {
-		/*
-		 * If BladeEngine is waiting for host ready indication,
-		 * we want to do a PCI reset.
-		 */
-		do_reset = true;
-	}
-
-	return do_reset;
-}
-
-/*
- *-------------------------------------------------------------------
- * Function: be_drive_POST
- *   This function is called to drive BladeEngine POST. The
- *   caller should ensure they cannot be pre-empted while this routine executes.
- * pfob -
- * return status   - BE_SUCCESS (0) on success. Negative error code on failure.
- *-------------------------------------------------------------------
- */
-int be_drive_POST(struct be_function_object *pfob)
-{
-	int status;
-
-	if (false != be_pci_reset_required(pfob)) {
-		/* PCI reset is needed (implicitly starts and waits for POST) */
-		status = be_pci_soft_reset(pfob);
-	} else {
-		/* No PCI reset is needed, start POST */
-		status = be_kickoff_and_wait_for_POST(pfob);
-	}
-
-	return status;
-}
diff --git a/drivers/staging/benet/mpu.h b/drivers/staging/benet/mpu.h
deleted file mode 100644
index 41f3f87516e..00000000000
--- a/drivers/staging/benet/mpu.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __mpu_amap_h__
-#define __mpu_amap_h__
-#include "ep.h"
-
-/* Provide control parameters for the Managment Processor Unit. */
-struct BE_MPU_CSRMAP_AMAP {
-	struct BE_EP_CSRMAP_AMAP ep;
-	u8 rsvd0[128];	/* DWORD 64 */
-	u8 rsvd1[32];	/* DWORD 68 */
-	u8 rsvd2[192];	/* DWORD 69 */
-	u8 rsvd3[192];	/* DWORD 75 */
-	u8 rsvd4[32];	/* DWORD 81 */
-	u8 rsvd5[32];	/* DWORD 82 */
-	u8 rsvd6[32];	/* DWORD 83 */
-	u8 rsvd7[32];	/* DWORD 84 */
-	u8 rsvd8[32];	/* DWORD 85 */
-	u8 rsvd9[32];	/* DWORD 86 */
-	u8 rsvd10[32];	/* DWORD 87 */
-	u8 rsvd11[32];	/* DWORD 88 */
-	u8 rsvd12[32];	/* DWORD 89 */
-	u8 rsvd13[32];	/* DWORD 90 */
-	u8 rsvd14[32];	/* DWORD 91 */
-	u8 rsvd15[32];	/* DWORD 92 */
-	u8 rsvd16[32];	/* DWORD 93 */
-	u8 rsvd17[32];	/* DWORD 94 */
-	u8 rsvd18[32];	/* DWORD 95 */
-	u8 rsvd19[32];	/* DWORD 96 */
-	u8 rsvd20[32];	/* DWORD 97 */
-	u8 rsvd21[32];	/* DWORD 98 */
-	u8 rsvd22[32];	/* DWORD 99 */
-	u8 rsvd23[32];	/* DWORD 100 */
-	u8 rsvd24[32];	/* DWORD 101 */
-	u8 rsvd25[32];	/* DWORD 102 */
-	u8 rsvd26[32];	/* DWORD 103 */
-	u8 rsvd27[32];	/* DWORD 104 */
-	u8 rsvd28[96];	/* DWORD 105 */
-	u8 rsvd29[32];	/* DWORD 108 */
-	u8 rsvd30[32];	/* DWORD 109 */
-	u8 rsvd31[32];	/* DWORD 110 */
-	u8 rsvd32[32];	/* DWORD 111 */
-	u8 rsvd33[32];	/* DWORD 112 */
-	u8 rsvd34[96];	/* DWORD 113 */
-	u8 rsvd35[32];	/* DWORD 116 */
-	u8 rsvd36[32];	/* DWORD 117 */
-	u8 rsvd37[32];	/* DWORD 118 */
-	u8 rsvd38[32];	/* DWORD 119 */
-	u8 rsvd39[32];	/* DWORD 120 */
-	u8 rsvd40[32];	/* DWORD 121 */
-	u8 rsvd41[134][32];	/* DWORD 122 */
-} __packed;
-struct MPU_CSRMAP_AMAP {
-	u32 dw[256];
-};
-
-#endif /* __mpu_amap_h__ */
diff --git a/drivers/staging/benet/mpu_context.h b/drivers/staging/benet/mpu_context.h
deleted file mode 100644
index 8ce90f9c46c..00000000000
--- a/drivers/staging/benet/mpu_context.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __mpu_context_amap_h__
-#define __mpu_context_amap_h__
-
-/*
- * Management command and control ring context. The MPUs BTLR_CTRL1 CSR
- * controls the writeback behavior of the producer and consumer index values.
- */
-struct BE_MCC_RING_CONTEXT_AMAP {
-	u8 con_index[16];	/* DWORD 0 */
-	u8 ring_size[4];	/* DWORD 0 */
-	u8 cq_id[11];	/* DWORD 0 */
-	u8 rsvd0;		/* DWORD 0 */
-	u8 prod_index[16];	/* DWORD 1 */
-	u8 pdid[15];	/* DWORD 1 */
-	u8 invalid;		/* DWORD 1 */
-	u8 cmd_pending_current[7];	/* DWORD 2 */
-	u8 rsvd1[25];	/* DWORD 2 */
-	u8 hpi_port_cq_id[11];	/* DWORD 3 */
-	u8 rsvd2[5];	/* DWORD 3 */
-	u8 cmd_pending_max[7];	/* DWORD 3 */
-	u8 rsvd3[9];	/* DWORD 3 */
-} __packed;
-struct MCC_RING_CONTEXT_AMAP {
-	u32 dw[4];
-};
-
-#endif /* __mpu_context_amap_h__ */
diff --git a/drivers/staging/benet/pcicfg.h b/drivers/staging/benet/pcicfg.h
deleted file mode 100644
index 7c15684adf4..00000000000
--- a/drivers/staging/benet/pcicfg.h
+++ /dev/null
@@ -1,825 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __pcicfg_amap_h__
-#define __pcicfg_amap_h__
-
-/* Vendor and Device ID Register. */
-struct BE_PCICFG_ID_CSR_AMAP {
-	u8 vendorid[16];	/* DWORD 0 */
-	u8 deviceid[16];	/* DWORD 0 */
-} __packed;
-struct PCICFG_ID_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* IO Bar Register. */
-struct BE_PCICFG_IOBAR_CSR_AMAP {
-	u8 iospace;		/* DWORD 0 */
-	u8 rsvd0[7];	/* DWORD 0 */
-	u8 iobar[24];	/* DWORD 0 */
-} __packed;
-struct PCICFG_IOBAR_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Memory BAR 0 Register. */
-struct BE_PCICFG_MEMBAR0_CSR_AMAP {
-	u8 memspace;	/* DWORD 0 */
-	u8 type[2];		/* DWORD 0 */
-	u8 pf;		/* DWORD 0 */
-	u8 rsvd0[10];	/* DWORD 0 */
-	u8 membar0[18];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR0_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Memory BAR 1 - Low Address Register. */
-struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP {
-	u8 memspace;	/* DWORD 0 */
-	u8 type[2];		/* DWORD 0 */
-	u8 pf;		/* DWORD 0 */
-	u8 rsvd0[13];	/* DWORD 0 */
-	u8 membar1lo[15];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR1_LO_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Memory BAR 1 - High Address Register. */
-struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP {
-	u8 membar1hi[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR1_HI_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Memory BAR 2 - Low Address Register. */
-struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP {
-	u8 memspace;	/* DWORD 0 */
-	u8 type[2];		/* DWORD 0 */
-	u8 pf;		/* DWORD 0 */
-	u8 rsvd0[17];	/* DWORD 0 */
-	u8 membar2lo[11];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR2_LO_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Memory BAR 2 - High Address Register. */
-struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP {
-	u8 membar2hi[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR2_HI_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Subsystem Vendor and ID (Function 0) Register. */
-struct BE_PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP {
-	u8 subsys_vendor_id[16];	/* DWORD 0 */
-	u8 subsys_id[16];	/* DWORD 0 */
-} __packed;
-struct PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Subsystem Vendor and ID (Function 1) Register. */
-struct BE_PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP {
-	u8 subsys_vendor_id[16];	/* DWORD 0 */
-	u8 subsys_id[16];	/* DWORD 0 */
-} __packed;
-struct PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Semaphore Register. */
-struct BE_PCICFG_SEMAPHORE_CSR_AMAP {
-	u8 locked;		/* DWORD 0 */
-	u8 rsvd0[31];	/* DWORD 0 */
-} __packed;
-struct PCICFG_SEMAPHORE_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Soft Reset Register. */
-struct BE_PCICFG_SOFT_RESET_CSR_AMAP {
-	u8 rsvd0[7];	/* DWORD 0 */
-	u8 softreset;	/* DWORD 0 */
-	u8 rsvd1[16];	/* DWORD 0 */
-	u8 nec_ll_rcvdetect_i[8];	/* DWORD 0 */
-} __packed;
-struct PCICFG_SOFT_RESET_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Unrecoverable Error Status (Low) Register. Each bit corresponds to
- * an internal Unrecoverable Error.  These are set by hardware and may be
- * cleared by writing a one to the respective bit(s) to be cleared.  Any
- * bit being set that is also unmasked will result in Unrecoverable Error
- * interrupt notification to the host CPU and/or Server Management chip
- * and the transitioning of BladeEngine to an Offline state.
- */
-struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP {
-	u8 cev_ue_status;	/* DWORD 0 */
-	u8 ctx_ue_status;	/* DWORD 0 */
-	u8 dbuf_ue_status;	/* DWORD 0 */
-	u8 erx_ue_status;	/* DWORD 0 */
-	u8 host_ue_status;	/* DWORD 0 */
-	u8 mpu_ue_status;	/* DWORD 0 */
-	u8 ndma_ue_status;	/* DWORD 0 */
-	u8 ptc_ue_status;	/* DWORD 0 */
-	u8 rdma_ue_status;	/* DWORD 0 */
-	u8 rxf_ue_status;	/* DWORD 0 */
-	u8 rxips_ue_status;	/* DWORD 0 */
-	u8 rxulp0_ue_status;	/* DWORD 0 */
-	u8 rxulp1_ue_status;	/* DWORD 0 */
-	u8 rxulp2_ue_status;	/* DWORD 0 */
-	u8 tim_ue_status;	/* DWORD 0 */
-	u8 tpost_ue_status;	/* DWORD 0 */
-	u8 tpre_ue_status;	/* DWORD 0 */
-	u8 txips_ue_status;	/* DWORD 0 */
-	u8 txulp0_ue_status;	/* DWORD 0 */
-	u8 txulp1_ue_status;	/* DWORD 0 */
-	u8 uc_ue_status;	/* DWORD 0 */
-	u8 wdma_ue_status;	/* DWORD 0 */
-	u8 txulp2_ue_status;	/* DWORD 0 */
-	u8 host1_ue_status;	/* DWORD 0 */
-	u8 p0_ob_link_ue_status;	/* DWORD 0 */
-	u8 p1_ob_link_ue_status;	/* DWORD 0 */
-	u8 host_gpio_ue_status;	/* DWORD 0 */
-	u8 mbox_netw_ue_status;	/* DWORD 0 */
-	u8 mbox_stor_ue_status;	/* DWORD 0 */
-	u8 axgmac0_ue_status;	/* DWORD 0 */
-	u8 axgmac1_ue_status;	/* DWORD 0 */
-	u8 mpu_intpend_ue_status;	/* DWORD 0 */
-} __packed;
-struct PCICFG_UE_STATUS_LOW_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Unrecoverable Error Status (High) Register. Each bit corresponds to
- * an internal Unrecoverable Error.  These are set by hardware and may be
- * cleared by writing a one to the respective bit(s) to be cleared.  Any
- * bit being set that is also unmasked will result in Unrecoverable Error
- * interrupt notification to the host CPU and/or Server Management chip;
- * and the transitioning of BladeEngine to an Offline state.
- */
-struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP {
-	u8 jtag_ue_status;	/* DWORD 0 */
-	u8 lpcmemhost_ue_status;	/* DWORD 0 */
-	u8 mgmt_mac_ue_status;	/* DWORD 0 */
-	u8 mpu_iram_ue_status;	/* DWORD 0 */
-	u8 pcs0online_ue_status;	/* DWORD 0 */
-	u8 pcs1online_ue_status;	/* DWORD 0 */
-	u8 pctl0_ue_status;	/* DWORD 0 */
-	u8 pctl1_ue_status;	/* DWORD 0 */
-	u8 pmem_ue_status;	/* DWORD 0 */
-	u8 rr_ue_status;	/* DWORD 0 */
-	u8 rxpp_ue_status;	/* DWORD 0 */
-	u8 txpb_ue_status;	/* DWORD 0 */
-	u8 txp_ue_status;	/* DWORD 0 */
-	u8 xaui_ue_status;	/* DWORD 0 */
-	u8 arm_ue_status;	/* DWORD 0 */
-	u8 ipc_ue_status;	/* DWORD 0 */
-	u8 rsvd0[16];	/* DWORD 0 */
-} __packed;
-struct PCICFG_UE_STATUS_HI_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Unrecoverable Error Mask (Low) Register. Each bit, when set to one,
- * will mask the associated Unrecoverable  Error status bit from notification
- * of Unrecoverable Error to the host CPU and/or Server Managment chip and the
- * transitioning of all BladeEngine units to an Offline state.
- */
-struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP {
-	u8 cev_ue_mask;	/* DWORD 0 */
-	u8 ctx_ue_mask;	/* DWORD 0 */
-	u8 dbuf_ue_mask;	/* DWORD 0 */
-	u8 erx_ue_mask;	/* DWORD 0 */
-	u8 host_ue_mask;	/* DWORD 0 */
-	u8 mpu_ue_mask;	/* DWORD 0 */
-	u8 ndma_ue_mask;	/* DWORD 0 */
-	u8 ptc_ue_mask;	/* DWORD 0 */
-	u8 rdma_ue_mask;	/* DWORD 0 */
-	u8 rxf_ue_mask;	/* DWORD 0 */
-	u8 rxips_ue_mask;	/* DWORD 0 */
-	u8 rxulp0_ue_mask;	/* DWORD 0 */
-	u8 rxulp1_ue_mask;	/* DWORD 0 */
-	u8 rxulp2_ue_mask;	/* DWORD 0 */
-	u8 tim_ue_mask;	/* DWORD 0 */
-	u8 tpost_ue_mask;	/* DWORD 0 */
-	u8 tpre_ue_mask;	/* DWORD 0 */
-	u8 txips_ue_mask;	/* DWORD 0 */
-	u8 txulp0_ue_mask;	/* DWORD 0 */
-	u8 txulp1_ue_mask;	/* DWORD 0 */
-	u8 uc_ue_mask;	/* DWORD 0 */
-	u8 wdma_ue_mask;	/* DWORD 0 */
-	u8 txulp2_ue_mask;	/* DWORD 0 */
-	u8 host1_ue_mask;	/* DWORD 0 */
-	u8 p0_ob_link_ue_mask;	/* DWORD 0 */
-	u8 p1_ob_link_ue_mask;	/* DWORD 0 */
-	u8 host_gpio_ue_mask;	/* DWORD 0 */
-	u8 mbox_netw_ue_mask;	/* DWORD 0 */
-	u8 mbox_stor_ue_mask;	/* DWORD 0 */
-	u8 axgmac0_ue_mask;	/* DWORD 0 */
-	u8 axgmac1_ue_mask;	/* DWORD 0 */
-	u8 mpu_intpend_ue_mask;	/* DWORD 0 */
-} __packed;
-struct PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Unrecoverable Error Mask (High) Register. Each bit, when set to one,
- * will mask the associated Unrecoverable Error status bit from notification
- * of Unrecoverable Error to the host CPU and/or Server Managment chip and the
- * transitioning of all BladeEngine units to an Offline state.
- */
-struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP {
-	u8 jtag_ue_mask;	/* DWORD 0 */
-	u8 lpcmemhost_ue_mask;	/* DWORD 0 */
-	u8 mgmt_mac_ue_mask;	/* DWORD 0 */
-	u8 mpu_iram_ue_mask;	/* DWORD 0 */
-	u8 pcs0online_ue_mask;	/* DWORD 0 */
-	u8 pcs1online_ue_mask;	/* DWORD 0 */
-	u8 pctl0_ue_mask;	/* DWORD 0 */
-	u8 pctl1_ue_mask;	/* DWORD 0 */
-	u8 pmem_ue_mask;	/* DWORD 0 */
-	u8 rr_ue_mask;	/* DWORD 0 */
-	u8 rxpp_ue_mask;	/* DWORD 0 */
-	u8 txpb_ue_mask;	/* DWORD 0 */
-	u8 txp_ue_mask;	/* DWORD 0 */
-	u8 xaui_ue_mask;	/* DWORD 0 */
-	u8 arm_ue_mask;	/* DWORD 0 */
-	u8 ipc_ue_mask;	/* DWORD 0 */
-	u8 rsvd0[16];	/* DWORD 0 */
-} __packed;
-struct PCICFG_UE_STATUS_HI_MASK_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Online Control Register 0. This register controls various units within
- * BladeEngine being in an Online or Offline state.
- */
-struct BE_PCICFG_ONLINE0_CSR_AMAP {
-	u8 cev_online;	/* DWORD 0 */
-	u8 ctx_online;	/* DWORD 0 */
-	u8 dbuf_online;	/* DWORD 0 */
-	u8 erx_online;	/* DWORD 0 */
-	u8 host_online;	/* DWORD 0 */
-	u8 mpu_online;	/* DWORD 0 */
-	u8 ndma_online;	/* DWORD 0 */
-	u8 ptc_online;	/* DWORD 0 */
-	u8 rdma_online;	/* DWORD 0 */
-	u8 rxf_online;	/* DWORD 0 */
-	u8 rxips_online;	/* DWORD 0 */
-	u8 rxulp0_online;	/* DWORD 0 */
-	u8 rxulp1_online;	/* DWORD 0 */
-	u8 rxulp2_online;	/* DWORD 0 */
-	u8 tim_online;	/* DWORD 0 */
-	u8 tpost_online;	/* DWORD 0 */
-	u8 tpre_online;	/* DWORD 0 */
-	u8 txips_online;	/* DWORD 0 */
-	u8 txulp0_online;	/* DWORD 0 */
-	u8 txulp1_online;	/* DWORD 0 */
-	u8 uc_online;	/* DWORD 0 */
-	u8 wdma_online;	/* DWORD 0 */
-	u8 txulp2_online;	/* DWORD 0 */
-	u8 host1_online;	/* DWORD 0 */
-	u8 p0_ob_link_online;	/* DWORD 0 */
-	u8 p1_ob_link_online;	/* DWORD 0 */
-	u8 host_gpio_online;	/* DWORD 0 */
-	u8 mbox_netw_online;	/* DWORD 0 */
-	u8 mbox_stor_online;	/* DWORD 0 */
-	u8 axgmac0_online;	/* DWORD 0 */
-	u8 axgmac1_online;	/* DWORD 0 */
-	u8 mpu_intpend_online;	/* DWORD 0 */
-} __packed;
-struct PCICFG_ONLINE0_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Online Control Register 1. This register controls various units within
- * BladeEngine being in an Online or Offline state.
- */
-struct BE_PCICFG_ONLINE1_CSR_AMAP {
-	u8 jtag_online;	/* DWORD 0 */
-	u8 lpcmemhost_online;	/* DWORD 0 */
-	u8 mgmt_mac_online;	/* DWORD 0 */
-	u8 mpu_iram_online;	/* DWORD 0 */
-	u8 pcs0online_online;	/* DWORD 0 */
-	u8 pcs1online_online;	/* DWORD 0 */
-	u8 pctl0_online;	/* DWORD 0 */
-	u8 pctl1_online;	/* DWORD 0 */
-	u8 pmem_online;	/* DWORD 0 */
-	u8 rr_online;	/* DWORD 0 */
-	u8 rxpp_online;	/* DWORD 0 */
-	u8 txpb_online;	/* DWORD 0 */
-	u8 txp_online;	/* DWORD 0 */
-	u8 xaui_online;	/* DWORD 0 */
-	u8 arm_online;	/* DWORD 0 */
-	u8 ipc_online;	/* DWORD 0 */
-	u8 rsvd0[16];	/* DWORD 0 */
-} __packed;
-struct PCICFG_ONLINE1_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Host Timer Register. */
-struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP {
-	u8 hosttimer[24];	/* DWORD 0 */
-	u8 hostintr;	/* DWORD 0 */
-	u8 rsvd0[7];	/* DWORD 0 */
-} __packed;
-struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* Scratchpad Register (for software use). */
-struct BE_PCICFG_SCRATCHPAD_CSR_AMAP {
-	u8 scratchpad[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_SCRATCHPAD_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express Capabilities Register. */
-struct BE_PCICFG_PCIE_CAP_CSR_AMAP {
-	u8 capid[8];	/* DWORD 0 */
-	u8 nextcap[8];	/* DWORD 0 */
-	u8 capver[4];	/* DWORD 0 */
-	u8 devport[4];	/* DWORD 0 */
-	u8 rsvd0[6];	/* DWORD 0 */
-	u8 rsvd1[2];	/* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_CAP_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express Device Capabilities Register. */
-struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP {
-	u8 payload[3];	/* DWORD 0 */
-	u8 rsvd0[3];	/* DWORD 0 */
-	u8 lo_lat[3];	/* DWORD 0 */
-	u8 l1_lat[3];	/* DWORD 0 */
-	u8 rsvd1[3];	/* DWORD 0 */
-	u8 rsvd2[3];	/* DWORD 0 */
-	u8 pwr_value[8];	/* DWORD 0 */
-	u8 pwr_scale[2];	/* DWORD 0 */
-	u8 rsvd3[4];	/* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_DEVCAP_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express Device Control/Status Registers. */
-struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP {
-	u8 CorrErrReportEn;	/* DWORD 0 */
-	u8 NonFatalErrReportEn;	/* DWORD 0 */
-	u8 FatalErrReportEn;	/* DWORD 0 */
-	u8 UnsuppReqReportEn;	/* DWORD 0 */
-	u8 EnableRelaxOrder;	/* DWORD 0 */
-	u8 Max_Payload_Size[3];	/* DWORD 0 */
-	u8 ExtendTagFieldEnable;	/* DWORD 0 */
-	u8 PhantomFnEnable;	/* DWORD 0 */
-	u8 AuxPwrPMEnable;	/* DWORD 0 */
-	u8 EnableNoSnoop;	/* DWORD 0 */
-	u8 Max_Read_Req_Size[3];	/* DWORD 0 */
-	u8 rsvd0;		/* DWORD 0 */
-	u8 CorrErrDetect;	/* DWORD 0 */
-	u8 NonFatalErrDetect;	/* DWORD 0 */
-	u8 FatalErrDetect;	/* DWORD 0 */
-	u8 UnsuppReqDetect;	/* DWORD 0 */
-	u8 AuxPwrDetect;	/* DWORD 0 */
-	u8 TransPending;	/* DWORD 0 */
-	u8 rsvd1[10];	/* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express Link Capabilities Register. */
-struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP {
-	u8 MaxLinkSpeed[4];	/* DWORD 0 */
-	u8 MaxLinkWidth[6];	/* DWORD 0 */
-	u8 ASPMSupport[2];	/* DWORD 0 */
-	u8 L0sExitLat[3];	/* DWORD 0 */
-	u8 L1ExitLat[3];	/* DWORD 0 */
-	u8 rsvd0[6];	/* DWORD 0 */
-	u8 PortNum[8];	/* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_LINK_CAP_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express Link Status Register. */
-struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP {
-	u8 ASPMCtl[2];	/* DWORD 0 */
-	u8 rsvd0;		/* DWORD 0 */
-	u8 ReadCmplBndry;	/* DWORD 0 */
-	u8 LinkDisable;	/* DWORD 0 */
-	u8 RetrainLink;	/* DWORD 0 */
-	u8 CommonClkConfig;	/* DWORD 0 */
-	u8 ExtendSync;	/* DWORD 0 */
-	u8 rsvd1[8];	/* DWORD 0 */
-	u8 LinkSpeed[4];	/* DWORD 0 */
-	u8 NegLinkWidth[6];	/* DWORD 0 */
-	u8 LinkTrainErr;	/* DWORD 0 */
-	u8 LinkTrain;	/* DWORD 0 */
-	u8 SlotClkConfig;	/* DWORD 0 */
-	u8 rsvd2[3];	/* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_LINK_STATUS_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express MSI Configuration Register. */
-struct BE_PCICFG_MSI_CSR_AMAP {
-	u8 capid[8];	/* DWORD 0 */
-	u8 nextptr[8];	/* DWORD 0 */
-	u8 tablesize[11];	/* DWORD 0 */
-	u8 rsvd0[3];	/* DWORD 0 */
-	u8 funcmask;	/* DWORD 0 */
-	u8 en;		/* DWORD 0 */
-} __packed;
-struct PCICFG_MSI_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* MSI-X Table Offset Register. */
-struct BE_PCICFG_MSIX_TABLE_CSR_AMAP {
-	u8 tablebir[3];	/* DWORD 0 */
-	u8 offset[29];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_TABLE_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* MSI-X PBA Offset Register. */
-struct BE_PCICFG_MSIX_PBA_CSR_AMAP {
-	u8 pbabir[3];	/* DWORD 0 */
-	u8 offset[29];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_PBA_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express MSI-X Message Vector Control Register. */
-struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP {
-	u8 vector_control;	/* DWORD 0 */
-	u8 rsvd0[31];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express MSI-X Message Data Register. */
-struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP {
-	u8 data[16];	/* DWORD 0 */
-	u8 rsvd0[16];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_MSG_DATA_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express MSI-X Message Address Register - High Part. */
-struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP {
-	u8 addr[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP {
-	u32 dw[1];
-};
-
-/* PCI Express MSI-X Message Address Register - Low Part. */
-struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP {
-	u8 rsvd0[2];	/* DWORD 0 */
-	u8 addr[30];	/* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP {
-	u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_18_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_18_RSVD_AMAP {
-	u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_19_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_19_RSVD_AMAP {
-	u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_20_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[25][32];	/* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_20_RSVD_AMAP {
-	u32 dw[26];
-};
-
-struct BE_PCICFG_ANON_21_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[1919][32];	/* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_21_RSVD_AMAP {
-	u32 dw[1920];
-};
-
-struct BE_PCICFG_ANON_22_MESSAGE_AMAP {
-	struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP vec_ctrl;
-	struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP msg_data;
-	struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP addr_hi;
-	struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP addr_low;
-} __packed;
-struct PCICFG_ANON_22_MESSAGE_AMAP {
-	u32 dw[4];
-};
-
-struct BE_PCICFG_ANON_23_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[895][32];	/* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_23_RSVD_AMAP {
-	u32 dw[896];
-};
-
-/* These PCI Configuration Space registers are for the Storage  Function of
- * BladeEngine (Function 0). In the memory map of the registers below their
- * table,
- */
-struct BE_PCICFG0_CSRMAP_AMAP {
-	struct BE_PCICFG_ID_CSR_AMAP id;
-	u8 rsvd0[32];	/* DWORD 1 */
-	u8 rsvd1[32];	/* DWORD 2 */
-	u8 rsvd2[32];	/* DWORD 3 */
-	struct BE_PCICFG_IOBAR_CSR_AMAP iobar;
-	struct BE_PCICFG_MEMBAR0_CSR_AMAP membar0;
-	struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP membar1_lo;
-	struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP membar1_hi;
-	struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP membar2_lo;
-	struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP membar2_hi;
-	u8 rsvd3[32];	/* DWORD 10 */
-	struct BE_PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP subsystem_id;
-	u8 rsvd4[32];	/* DWORD 12 */
-	u8 rsvd5[32];	/* DWORD 13 */
-	u8 rsvd6[32];	/* DWORD 14 */
-	u8 rsvd7[32];	/* DWORD 15 */
-	struct BE_PCICFG_SEMAPHORE_CSR_AMAP semaphore[4];
-	struct BE_PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
-	u8 rsvd8[32];	/* DWORD 21 */
-	struct BE_PCICFG_SCRATCHPAD_CSR_AMAP scratchpad;
-	u8 rsvd9[32];	/* DWORD 23 */
-	u8 rsvd10[32];	/* DWORD 24 */
-	u8 rsvd11[32];	/* DWORD 25 */
-	u8 rsvd12[32];	/* DWORD 26 */
-	u8 rsvd13[32];	/* DWORD 27 */
-	u8 rsvd14[2][32];	/* DWORD 28 */
-	u8 rsvd15[32];	/* DWORD 30 */
-	u8 rsvd16[32];	/* DWORD 31 */
-	u8 rsvd17[8][32];	/* DWORD 32 */
-	struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP ue_status_low;
-	struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP ue_status_hi;
-	struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP ue_status_low_mask;
-	struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP ue_status_hi_mask;
-	struct BE_PCICFG_ONLINE0_CSR_AMAP online0;
-	struct BE_PCICFG_ONLINE1_CSR_AMAP online1;
-	u8 rsvd18[32];	/* DWORD 46 */
-	u8 rsvd19[32];	/* DWORD 47 */
-	u8 rsvd20[32];	/* DWORD 48 */
-	u8 rsvd21[32];	/* DWORD 49 */
-	struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP host_timer_int_ctrl;
-	u8 rsvd22[32];	/* DWORD 51 */
-	struct BE_PCICFG_PCIE_CAP_CSR_AMAP pcie_cap;
-	struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP pcie_devcap;
-	struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP pcie_control_status;
-	struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP pcie_link_cap;
-	struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP pcie_link_status;
-	struct BE_PCICFG_MSI_CSR_AMAP msi;
-	struct BE_PCICFG_MSIX_TABLE_CSR_AMAP msix_table_offset;
-	struct BE_PCICFG_MSIX_PBA_CSR_AMAP msix_pba_offset;
-	u8 rsvd23[32];	/* DWORD 60 */
-	u8 rsvd24[32];	/* DWORD 61 */
-	u8 rsvd25[32];	/* DWORD 62 */
-	u8 rsvd26[32];	/* DWORD 63 */
-	u8 rsvd27[32];	/* DWORD 64 */
-	u8 rsvd28[32];	/* DWORD 65 */
-	u8 rsvd29[32];	/* DWORD 66 */
-	u8 rsvd30[32];	/* DWORD 67 */
-	u8 rsvd31[32];	/* DWORD 68 */
-	u8 rsvd32[32];	/* DWORD 69 */
-	u8 rsvd33[32];	/* DWORD 70 */
-	u8 rsvd34[32];	/* DWORD 71 */
-	u8 rsvd35[32];	/* DWORD 72 */
-	u8 rsvd36[32];	/* DWORD 73 */
-	u8 rsvd37[32];	/* DWORD 74 */
-	u8 rsvd38[32];	/* DWORD 75 */
-	u8 rsvd39[32];	/* DWORD 76 */
-	u8 rsvd40[32];	/* DWORD 77 */
-	u8 rsvd41[32];	/* DWORD 78 */
-	u8 rsvd42[32];	/* DWORD 79 */
-	u8 rsvd43[32];	/* DWORD 80 */
-	u8 rsvd44[32];	/* DWORD 81 */
-	u8 rsvd45[32];	/* DWORD 82 */
-	u8 rsvd46[32];	/* DWORD 83 */
-	u8 rsvd47[32];	/* DWORD 84 */
-	u8 rsvd48[32];	/* DWORD 85 */
-	u8 rsvd49[32];	/* DWORD 86 */
-	u8 rsvd50[32];	/* DWORD 87 */
-	u8 rsvd51[32];	/* DWORD 88 */
-	u8 rsvd52[32];	/* DWORD 89 */
-	u8 rsvd53[32];	/* DWORD 90 */
-	u8 rsvd54[32];	/* DWORD 91 */
-	u8 rsvd55[32];	/* DWORD 92 */
-	u8 rsvd56[832];	/* DWORD 93 */
-	u8 rsvd57[32];	/* DWORD 119 */
-	u8 rsvd58[32];	/* DWORD 120 */
-	u8 rsvd59[32];	/* DWORD 121 */
-	u8 rsvd60[32];	/* DWORD 122 */
-	u8 rsvd61[32];	/* DWORD 123 */
-	u8 rsvd62[32];	/* DWORD 124 */
-	u8 rsvd63[32];	/* DWORD 125 */
-	u8 rsvd64[32];	/* DWORD 126 */
-	u8 rsvd65[32];	/* DWORD 127 */
-	u8 rsvd66[61440];	/* DWORD 128 */
-	struct BE_PCICFG_ANON_22_MESSAGE_AMAP message[32];
-	u8 rsvd67[28672];	/* DWORD 2176 */
-	u8 rsvd68[32];	/* DWORD 3072 */
-	u8 rsvd69[1023][32];	/* DWORD 3073 */
-} __packed;
-struct PCICFG0_CSRMAP_AMAP {
-	u32 dw[4096];
-};
-
-struct BE_PCICFG_ANON_24_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_24_RSVD_AMAP {
-	u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_25_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_25_RSVD_AMAP {
-	u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_26_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_26_RSVD_AMAP {
-	u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_27_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[32];	/* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_27_RSVD_AMAP {
-	u32 dw[2];
-};
-
-struct BE_PCICFG_ANON_28_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[3][32];	/* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_28_RSVD_AMAP {
-	u32 dw[4];
-};
-
-struct BE_PCICFG_ANON_29_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[36][32];	/* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_29_RSVD_AMAP {
-	u32 dw[37];
-};
-
-struct BE_PCICFG_ANON_30_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[1930][32];	/* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_30_RSVD_AMAP {
-	u32 dw[1931];
-};
-
-struct BE_PCICFG_ANON_31_MESSAGE_AMAP {
-	struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP vec_ctrl;
-	struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP msg_data;
-	struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP addr_hi;
-	struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP addr_low;
-} __packed;
-struct PCICFG_ANON_31_MESSAGE_AMAP {
-	u32 dw[4];
-};
-
-struct BE_PCICFG_ANON_32_RSVD_AMAP {
-	u8 rsvd0[32];	/* DWORD 0 */
-	u8 rsvd1[895][32];	/* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_32_RSVD_AMAP {
-	u32 dw[896];
-};
-
-/* This PCI configuration space register map is for the  Networking Function of
- * BladeEngine (Function 1).
- */
-struct BE_PCICFG1_CSRMAP_AMAP {
-	struct BE_PCICFG_ID_CSR_AMAP id;
-	u8 rsvd0[32];	/* DWORD 1 */
-	u8 rsvd1[32];	/* DWORD 2 */
-	u8 rsvd2[32];	/* DWORD 3 */
-	struct BE_PCICFG_IOBAR_CSR_AMAP iobar;
-	struct BE_PCICFG_MEMBAR0_CSR_AMAP membar0;
-	struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP membar1_lo;
-	struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP membar1_hi;
-	struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP membar2_lo;
-	struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP membar2_hi;
-	u8 rsvd3[32];	/* DWORD 10 */
-	struct BE_PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP subsystem_id;
-	u8 rsvd4[32];	/* DWORD 12 */
-	u8 rsvd5[32];	/* DWORD 13 */
-	u8 rsvd6[32];	/* DWORD 14 */
-	u8 rsvd7[32];	/* DWORD 15 */
-	struct BE_PCICFG_SEMAPHORE_CSR_AMAP semaphore[4];
-	struct BE_PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
-	u8 rsvd8[32];	/* DWORD 21 */
-	struct BE_PCICFG_SCRATCHPAD_CSR_AMAP scratchpad;
-	u8 rsvd9[32];	/* DWORD 23 */
-	u8 rsvd10[32];	/* DWORD 24 */
-	u8 rsvd11[32];	/* DWORD 25 */
-	u8 rsvd12[32];	/* DWORD 26 */
-	u8 rsvd13[32];	/* DWORD 27 */
-	u8 rsvd14[2][32];	/* DWORD 28 */
-	u8 rsvd15[32];	/* DWORD 30 */
-	u8 rsvd16[32];	/* DWORD 31 */
-	u8 rsvd17[8][32];	/* DWORD 32 */
-	struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP ue_status_low;
-	struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP ue_status_hi;
-	struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP ue_status_low_mask;
-	struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP ue_status_hi_mask;
-	struct BE_PCICFG_ONLINE0_CSR_AMAP online0;
-	struct BE_PCICFG_ONLINE1_CSR_AMAP online1;
-	u8 rsvd18[32];	/* DWORD 46 */
-	u8 rsvd19[32];	/* DWORD 47 */
-	u8 rsvd20[32];	/* DWORD 48 */
-	u8 rsvd21[32];	/* DWORD 49 */
-	struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP host_timer_int_ctrl;
-	u8 rsvd22[32];	/* DWORD 51 */
-	struct BE_PCICFG_PCIE_CAP_CSR_AMAP pcie_cap;
-	struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP pcie_devcap;
-	struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP pcie_control_status;
-	struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP pcie_link_cap;
-	struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP pcie_link_status;
-	struct BE_PCICFG_MSI_CSR_AMAP msi;
-	struct BE_PCICFG_MSIX_TABLE_CSR_AMAP msix_table_offset;
-	struct BE_PCICFG_MSIX_PBA_CSR_AMAP msix_pba_offset;
-	u8 rsvd23[64];	/* DWORD 60 */
-	u8 rsvd24[32];	/* DWORD 62 */
-	u8 rsvd25[32];	/* DWORD 63 */
-	u8 rsvd26[32];	/* DWORD 64 */
-	u8 rsvd27[32];	/* DWORD 65 */
-	u8 rsvd28[32];	/* DWORD 66 */
-	u8 rsvd29[32];	/* DWORD 67 */
-	u8 rsvd30[32];	/* DWORD 68 */
-	u8 rsvd31[32];	/* DWORD 69 */
-	u8 rsvd32[32];	/* DWORD 70 */
-	u8 rsvd33[32];	/* DWORD 71 */
-	u8 rsvd34[32];	/* DWORD 72 */
-	u8 rsvd35[32];	/* DWORD 73 */
-	u8 rsvd36[32];	/* DWORD 74 */
-	u8 rsvd37[128];	/* DWORD 75 */
-	u8 rsvd38[32];	/* DWORD 79 */
-	u8 rsvd39[1184];	/* DWORD 80 */
-	u8 rsvd40[61792];	/* DWORD 117 */
-	struct BE_PCICFG_ANON_31_MESSAGE_AMAP message[32];
-	u8 rsvd41[28672];	/* DWORD 2176 */
-	u8 rsvd42[32];	/* DWORD 3072 */
-	u8 rsvd43[1023][32];	/* DWORD 3073 */
-} __packed;
-struct PCICFG1_CSRMAP_AMAP {
-	u32 dw[4096];
-};
-
-#endif /* __pcicfg_amap_h__ */
diff --git a/drivers/staging/benet/post_codes.h b/drivers/staging/benet/post_codes.h
deleted file mode 100644
index 6d1621f5f5f..00000000000
--- a/drivers/staging/benet/post_codes.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __post_codes_amap_h__
-#define __post_codes_amap_h__
-
-/* --- MGMT_HBA_POST_STAGE_ENUM --- */
-#define POST_STAGE_POWER_ON_RESET   (0)	/* State after a cold or warm boot. */
-#define POST_STAGE_AWAITING_HOST_RDY (1)	/* ARM boot code awaiting a
-						go-ahed from  the host. */
-#define POST_STAGE_HOST_RDY (2)	/* Host has given go-ahed to ARM. */
-#define POST_STAGE_BE_RESET (3)	/* Host wants to reset chip, this is a  chip
-						workaround  */
-#define POST_STAGE_SEEPROM_CS_START (256)	/* SEEPROM checksum
-						test start. */
-#define POST_STAGE_SEEPROM_CS_DONE  (257)	/* SEEPROM checksum test
-							done. */
-#define POST_STAGE_DDR_CONFIG_START (512)	/* DDR configuration start. */
-#define POST_STAGE_DDR_CONFIG_DONE  (513)	/* DDR configuration done. */
-#define POST_STAGE_DDR_CALIBRATE_START  (768)	/* DDR calibration start. */
-#define POST_STAGE_DDR_CALIBRATE_DONE   (769)	/* DDR calibration done. */
-#define POST_STAGE_DDR_TEST_START   (1024)	/* DDR memory test start. */
-#define POST_STAGE_DDR_TEST_DONE    (1025)	/* DDR memory test done. */
-#define POST_STAGE_REDBOOT_INIT_START   (1536)	/* Redboot starts execution. */
-#define POST_STAGE_REDBOOT_INIT_DONE (1537)	/* Redboot done execution. */
-#define POST_STAGE_FW_IMAGE_LOAD_START (1792)	/* Firmware image load to
-							DDR start. */
-#define POST_STAGE_FW_IMAGE_LOAD_DONE   (1793)	/* Firmware image load
-							to DDR done. */
-#define POST_STAGE_ARMFW_START          (2048)	/* ARMfw runtime code
-						starts execution. */
-#define POST_STAGE_DHCP_QUERY_START     (2304)	/* DHCP server query start. */
-#define POST_STAGE_DHCP_QUERY_DONE      (2305)	/* DHCP server query done. */
-#define POST_STAGE_BOOT_TARGET_DISCOVERY_START (2560)	/* Boot Target
-						Discovery Start. */
-#define POST_STAGE_BOOT_TARGET_DISCOVERY_DONE (2561)	/* Boot Target
-						Discovery Done. */
-#define POST_STAGE_RC_OPTION_SET        (2816)	/* Remote configuration
-						option is set in  SEEPROM  */
-#define POST_STAGE_SWITCH_LINK          (2817)	/* Wait for link up on switch */
-#define POST_STAGE_SEND_ICDS_MESSAGE    (2818)	/* Send the ICDS message
-						to switch */
-#define POST_STAGE_PERFROM_TFTP         (2819)	/* Download xml using TFTP */
-#define POST_STAGE_PARSE_XML            (2820)	/* Parse XML file */
-#define POST_STAGE_DOWNLOAD_IMAGE       (2821)	/* Download IMAGE from
-						TFTP server */
-#define POST_STAGE_FLASH_IMAGE          (2822)	/* Flash the IMAGE */
-#define POST_STAGE_RC_DONE              (2823)	/* Remote configuration
-						complete */
-#define POST_STAGE_REBOOT_SYSTEM        (2824)	/* Upgrade IMAGE done,
-						reboot required */
-#define POST_STAGE_MAC_ADDRESS          (3072)	/* MAC Address Check */
-#define POST_STAGE_ARMFW_READY          (49152)	/* ARMfw is done with POST
-						and ready. */
-#define POST_STAGE_ARMFW_UE             (61440)	/* ARMfw has asserted an
-						unrecoverable error. The
-						lower 3 hex digits of the
-						stage code identify the
-						unique error code.
-						*/
-
-/* This structure defines the format of the MPU semaphore
- * register when used for POST.
- */
-struct BE_MGMT_HBA_POST_STATUS_STRUCT_AMAP {
-	u8 stage[16];	/* DWORD 0 */
-	u8 rsvd0[10];	/* DWORD 0 */
-	u8 iscsi_driver_loaded;	/* DWORD 0 */
-	u8 option_rom_installed;	/* DWORD 0 */
-	u8 iscsi_ip_conflict;	/* DWORD 0 */
-	u8 iscsi_no_ip;	/* DWORD 0 */
-	u8 backup_fw;	/* DWORD 0 */
-	u8 error;		/* DWORD 0 */
-} __packed;
-struct MGMT_HBA_POST_STATUS_STRUCT_AMAP {
-	u32 dw[1];
-};
-
-/* --- MGMT_HBA_POST_DUMMY_BITS_ENUM --- */
-#define POST_BIT_ISCSI_LOADED           (26)
-#define POST_BIT_OPTROM_INST            (27)
-#define POST_BIT_BAD_IP_ADDR            (28)
-#define POST_BIT_NO_IP_ADDR             (29)
-#define POST_BIT_BACKUP_FW              (30)
-#define POST_BIT_ERROR                  (31)
-
-/* --- MGMT_HBA_POST_DUMMY_VALUES_ENUM --- */
-#define POST_ISCSI_DRIVER_LOADED        (67108864)
-#define POST_OPTROM_INSTALLED           (134217728)
-#define POST_ISCSI_IP_ADDRESS_CONFLICT  (268435456)
-#define POST_ISCSI_NO_IP_ADDRESS        (536870912)
-#define POST_BACKUP_FW_LOADED           (1073741824)
-#define POST_FATAL_ERROR                (2147483648)
-
-#endif /* __post_codes_amap_h__ */
diff --git a/drivers/staging/benet/regmap.h b/drivers/staging/benet/regmap.h
deleted file mode 100644
index e816ba210e8..00000000000
--- a/drivers/staging/benet/regmap.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.  The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __regmap_amap_h__
-#define __regmap_amap_h__
-#include "pcicfg.h"
-#include "ep.h"
-#include "cev.h"
-#include "mpu.h"
-#include "doorbells.h"
-
-/*
- * This is the control and status register map for BladeEngine, showing
- * the relative size and offset of each sub-module. The CSR registers
- * are identical for the network and storage PCI functions. The
- * CSR map is shown below, followed by details of each block,
- * in sub-sections.  The sub-sections begin with a description
- * of CSRs that are instantiated in multiple blocks.
- */
-struct BE_BLADE_ENGINE_CSRMAP_AMAP {
-	struct BE_MPU_CSRMAP_AMAP mpu;
-	u8 rsvd0[8192];	/* DWORD 256 */
-	u8 rsvd1[8192];	/* DWORD 512 */
-	struct BE_CEV_CSRMAP_AMAP cev;
-	u8 rsvd2[8192];	/* DWORD 1024 */
-	u8 rsvd3[8192];	/* DWORD 1280 */
-	u8 rsvd4[8192];	/* DWORD 1536 */
-	u8 rsvd5[8192];	/* DWORD 1792 */
-	u8 rsvd6[8192];	/* DWORD 2048 */
-	u8 rsvd7[8192];	/* DWORD 2304 */
-	u8 rsvd8[8192];	/* DWORD 2560 */
-	u8 rsvd9[8192];	/* DWORD 2816 */
-	u8 rsvd10[8192];	/* DWORD 3072 */
-	u8 rsvd11[8192];	/* DWORD 3328 */
-	u8 rsvd12[8192];	/* DWORD 3584 */
-	u8 rsvd13[8192];	/* DWORD 3840 */
-	u8 rsvd14[8192];	/* DWORD 4096 */
-	u8 rsvd15[8192];	/* DWORD 4352 */
-	u8 rsvd16[8192];	/* DWORD 4608 */
-	u8 rsvd17[8192];	/* DWORD 4864 */
-	u8 rsvd18[8192];	/* DWORD 5120 */
-	u8 rsvd19[8192];	/* DWORD 5376 */
-	u8 rsvd20[8192];	/* DWORD 5632 */
-	u8 rsvd21[8192];	/* DWORD 5888 */
-	u8 rsvd22[8192];	/* DWORD 6144 */
-	u8 rsvd23[17152][32];	/* DWORD 6400 */
-} __packed;
-struct BLADE_ENGINE_CSRMAP_AMAP {
-	u32 dw[23552];
-};
-
-#endif /* __regmap_amap_h__ */
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 5ed4ae07bac..6789089e246 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -485,7 +485,7 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
 			usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n",
 				wbuflen, rbuflen);
 		ret = -ENOMEM;
-		goto fail;
+		goto err;
 	}
 
 	mutex_lock(&instance->cm_serialize);
@@ -565,6 +565,7 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
 	dbg("cm %#x", cm);
 fail:
 	mutex_unlock(&instance->cm_serialize);
+err:
 	return ret;
 }
 
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 0f5c05f6f9d..c40a9b284cc 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -50,6 +50,7 @@
 
 static struct usb_device_id usbtmc_devices[] = {
 	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
+	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), },
 	{ 0, } /* terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, usbtmc_devices);
@@ -106,12 +107,13 @@ static int usbtmc_open(struct inode *inode, struct file *filp)
 {
 	struct usb_interface *intf;
 	struct usbtmc_device_data *data;
-	int retval = -ENODEV;
+	int retval = 0;
 
 	intf = usb_find_interface(&usbtmc_driver, iminor(inode));
 	if (!intf) {
 		printk(KERN_ERR KBUILD_MODNAME
 		       ": can not find device for minor %d", iminor(inode));
+		retval = -ENODEV;
 		goto exit;
 	}
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 7513bb083c1..6585f527e38 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -359,11 +359,6 @@ static void destroy_async(struct dev_state *ps, struct list_head *list)
 		spin_lock_irqsave(&ps->lock, flags);
 	}
 	spin_unlock_irqrestore(&ps->lock, flags);
-	as = async_getcompleted(ps);
-	while (as) {
-		free_async(as);
-		as = async_getcompleted(ps);
-	}
 }
 
 static void destroy_async_on_interface(struct dev_state *ps,
@@ -643,6 +638,7 @@ static int usbdev_release(struct inode *inode, struct file *file)
 	struct dev_state *ps = file->private_data;
 	struct usb_device *dev = ps->dev;
 	unsigned int ifnum;
+	struct async *as;
 
 	usb_lock_device(dev);
 
@@ -661,6 +657,12 @@ static int usbdev_release(struct inode *inode, struct file *file)
 	usb_unlock_device(dev);
 	usb_put_dev(dev);
 	put_pid(ps->disc_pid);
+
+	as = async_getcompleted(ps);
+	while (as) {
+		free_async(as);
+		as = async_getcompleted(ps);
+	}
 	kfree(ps);
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 3712b925b31..ecc9b66c03c 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1095,7 +1095,8 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	prev->qh_next = qh->qh_next;
 	wmb ();
 
-	if (unlikely (ehci_to_hcd(ehci)->state == HC_STATE_HALT)) {
+	/* If the controller isn't running, we don't have to wait for it */
+	if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) {
 		/* if (unlikely (qh->reclaim != 0))
 		 *	this will recurse, probably not much
 		 */
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 07bcb931021..1d0b49e3f19 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1536,7 +1536,7 @@ itd_link_urb (
 					struct ehci_itd, itd_list);
 			list_move_tail (&itd->itd_list, &stream->td_list);
 			itd->stream = iso_stream_get (stream);
-			itd->urb = usb_get_urb (urb);
+			itd->urb = urb;
 			itd_init (ehci, stream, itd);
 		}
 
@@ -1645,7 +1645,7 @@ itd_complete (
 	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
-	if (unlikely (list_empty (&stream->td_list))) {
+	if (unlikely(list_is_singular(&stream->td_list))) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
 				-= stream->bandwidth;
 		ehci_vdbg (ehci,
@@ -1656,7 +1656,6 @@ itd_complete (
 	iso_stream_put (ehci, stream);
 
 done:
-	usb_put_urb(urb);
 	itd->urb = NULL;
 	if (ehci->clock_frame != itd->frame || itd->index[7] != -1) {
 		/* OK to recycle this ITD now. */
@@ -1949,7 +1948,7 @@ sitd_link_urb (
 				struct ehci_sitd, sitd_list);
 		list_move_tail (&sitd->sitd_list, &stream->td_list);
 		sitd->stream = iso_stream_get (stream);
-		sitd->urb = usb_get_urb (urb);
+		sitd->urb = urb;
 
 		sitd_patch(ehci, stream, sitd, sched, packet);
 		sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size,
@@ -2034,7 +2033,7 @@ sitd_complete (
 	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
-	if (list_empty (&stream->td_list)) {
+	if (list_is_singular(&stream->td_list)) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
 				-= stream->bandwidth;
 		ehci_vdbg (ehci,
@@ -2045,7 +2044,6 @@ sitd_complete (
 	iso_stream_put (ehci, stream);
 	/* OK to recycle this SITD now that its completion callback ran. */
 done:
-	usb_put_urb(urb);
 	sitd->urb = NULL;
 	sitd->stream = NULL;
 	list_move(&sitd->sitd_list, &stream->free_list);
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index fb3055f084b..7cf74f8c2db 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -28,8 +28,6 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-
 static struct clk *usb_host_clock;
 
 static void ep93xx_start_hc(struct device *dev)
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index 878c77ca086..972f20b3406 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -499,6 +499,7 @@ static int mdc800_usb_probe (struct usb_interface *intf,
 	retval = usb_register_dev(intf, &mdc800_class);
 	if (retval) {
 		dev_err(&intf->dev, "Not able to get a minor for this device.\n");
+		mutex_unlock(&mdc800->io_lock);
 		return -ENODEV;
 	}
 
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 7b6922e08ed..20352654201 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -376,7 +376,7 @@ static int adu_release(struct inode *inode, struct file *file)
 	if (dev->open_count <= 0) {
 		dbg(1," %s : device not opened", __func__);
 		retval = -ENODEV;
-		goto exit;
+		goto unlock;
 	}
 
 	adu_release_internal(dev);
@@ -385,9 +385,9 @@ static int adu_release(struct inode *inode, struct file *file)
 		if (!dev->open_count)	/* ... and we're the last user */
 			adu_delete(dev);
 	}
-
-exit:
+unlock:
 	mutex_unlock(&adutux_mutex);
+exit:
 	dbg(2," %s : leave, return value %d", __func__, retval);
 	return retval;
 }
diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c
index 63dff9ba73c..f26ea8dc157 100644
--- a/drivers/usb/misc/vstusb.c
+++ b/drivers/usb/misc/vstusb.c
@@ -401,6 +401,7 @@ static ssize_t vstusb_write(struct file *file, const char __user *buffer,
 	}
 
 	if (copy_from_user(buf, buffer, count)) {
+		mutex_unlock(&vstdev->lock);
 		dev_err(&dev->dev, "%s: can't copy_from_user\n", __func__);
 		retval = -EFAULT;
 		goto exit;
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 027f4b7dde8..9b4082b58c5 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -79,6 +79,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
 	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f92f4d77337..ae84c326a54 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -663,6 +663,11 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
 	{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
+	{ USB_DEVICE(ATMEL_VID, STK541_PID) },
+	{ USB_DEVICE(DE_VID, STB_PID) },
+	{ USB_DEVICE(DE_VID, WHT_PID) },
+	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index e300c840f8c..daaf63db0b5 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -893,6 +893,26 @@
 #define DIEBOLD_BCS_SE923_PID	0xfb99
 
 /*
+ * Atmel STK541
+ */
+#define ATMEL_VID		0x03eb /* Vendor ID */
+#define STK541_PID		0x2109 /* Zigbee Controller */
+
+/*
+ * Dresden Elektronic Sensor Terminal Board
+ */
+#define DE_VID			0x1cf1 /* Vendor ID */
+#define STB_PID			0x0001 /* Sensor Terminal Board */
+#define WHT_PID			0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID 		0x0456
+#define ADI_GNICE_PID 		0xF000
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index b7c132bded7..61ebddc4849 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -89,6 +89,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define OPTION_PRODUCT_ETNA_MODEM_GT		0x7041
 #define OPTION_PRODUCT_ETNA_MODEM_EX		0x7061
 #define OPTION_PRODUCT_ETNA_KOI_MODEM		0x7100
+#define OPTION_PRODUCT_GTM380_MODEM		0x7201
 
 #define HUAWEI_VENDOR_ID			0x12D1
 #define HUAWEI_PRODUCT_E600			0x1001
@@ -197,6 +198,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 /* OVATION PRODUCTS */
 #define NOVATELWIRELESS_PRODUCT_MC727		0x4100
 #define NOVATELWIRELESS_PRODUCT_MC950D		0x4400
+#define NOVATELWIRELESS_PRODUCT_U727		0x5010
 
 /* FUTURE NOVATEL PRODUCTS */
 #define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED	0X6000
@@ -288,15 +290,11 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
+#define ZTE_PRODUCT_MF622			0x0001
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 
-/* Ericsson products */
-#define ERICSSON_VENDOR_ID			0x0bdb
-#define ERICSSON_PRODUCT_F3507G_1		0x1900
-#define ERICSSON_PRODUCT_F3507G_2		0x1902
-
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
 
@@ -325,6 +323,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTM380_MODEM) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
@@ -415,6 +414,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
@@ -442,7 +442,6 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) },	/* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) },	/* Dell Wireless HSDPA 5520 */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) },	/* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
-	{ USB_DEVICE(DELL_VENDOR_ID, 0x8147) },					/* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) },	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) },	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, 	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
@@ -510,11 +509,10 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
-	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) },
-	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
 	{ } /* Terminating entry */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6f59c8e510e..cfde74a6faa 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -226,7 +226,7 @@ UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0610,
 		US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
-UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
+UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
 		"Nokia",
 		"Nokia 6233",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -951,7 +951,9 @@ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 		US_FL_FIX_CAPACITY ),
 
 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
-UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
+/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
+ * Thomas Bartosik <tbartdev@gmx-topmail.de> */
+UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
 		"Prolific Technology Inc.",
 		"Mass Storage Device",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -1390,6 +1392,16 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0 ),
 
+/* Reported by Jan Dumon <j.dumon@option.com>
+ * This device (wrongly) has a vendor-specific device descriptor.
+ * The entry is needed so usb-storage can bind to it's mass-storage
+ * interface as an interface driver */
+UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
+		"Option",
+		"GI 0431 SD-Card",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		0 ),
+
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
 		"Seagate",
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 238a96aee3a..613a5fc490d 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -921,8 +921,10 @@ static void wa_urb_enqueue_b(struct wa_xfer *xfer)
 	result = -ENODEV;
 	/* FIXME: segmentation broken -- kills DWA */
 	mutex_lock(&wusbhc->mutex);		/* get a WUSB dev */
-	if (urb->dev == NULL)
+	if (urb->dev == NULL) {
+		mutex_unlock(&wusbhc->mutex);
 		goto error_dev_gone;
+	}
 	wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
 	if (wusb_dev == NULL) {
 		mutex_unlock(&wusbhc->mutex);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index fb19803060c..41c27a44bd8 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@ config FB_SA1100
 
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
-	depends on FB && ARM && ARCH_IMX
+	depends on FB && (ARCH_IMX || ARCH_MX2)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -2120,16 +2120,30 @@ config FB_PRE_INIT_FB
 	  the bootloader.
 
 config FB_MX3
-       tristate "MX3 Framebuffer support"
-       depends on FB && MX3_IPU
-       select FB_CFB_FILLRECT
-       select FB_CFB_COPYAREA
-       select FB_CFB_IMAGEBLIT
-       default y
-       help
-         This is a framebuffer device for the i.MX31 LCD Controller. So
-         far only synchronous displays are supported. If you plan to use
-         an LCD display with your i.MX31 system, say Y here.
+	tristate "MX3 Framebuffer support"
+	depends on FB && MX3_IPU
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	default y
+	help
+	  This is a framebuffer device for the i.MX31 LCD Controller. So
+	  far only synchronous displays are supported. If you plan to use
+	  an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  This driver implements support for the E-Ink Broadsheet
+	  controller. The release name for this device was Epson S1D13521
+	  and could also have been called by other names when coupled with
+	  a bridge adapter.
 
 source "drivers/video/omap/Kconfig"
 
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 2a998ca6181..bb265eca7d5 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
 obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
 obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
 obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET)       += broadsheetfb.o
 obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
 obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
 obj-$(CONFIG_FB_IMX)              += imxfb.o
@@ -132,7 +133,7 @@ obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_MX3)              += mx3fb.o
+obj-$(CONFIG_FB_MX3)		  += mx3fb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 61c3d3f40fd..6995fe1e86d 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -28,9 +28,9 @@
 #include <linux/fb.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 2181ce4d7eb..35e8eb02b9e 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1853,13 +1853,14 @@ static void aty128_bl_exit(struct backlight_device *bd)
  *  Initialisation
  */
 
-#ifdef CONFIG_PPC_PMAC
+#ifdef CONFIG_PPC_PMAC__disabled
 static void aty128_early_resume(void *data)
 {
         struct aty128fb_par *par = data;
 
 	if (try_acquire_console_sem())
 		return;
+	pci_restore_state(par->pdev);
 	aty128_do_resume(par->pdev);
 	release_console_sem();
 }
@@ -1907,7 +1908,14 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i
 		/* Indicate sleep capability */
 		if (par->chip_gen == rage_M3) {
 			pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+       * others we now rely on the PCI core restoring the config space for us, which
+       * isn't the case with that hack, and that code path causes various things to
+       * be called with interrupts off while they shouldn't. I'm leaving the code in
+       * as it can be useful for debugging purposes
+       */
 			pmac_set_early_video_resume(aty128_early_resume, par);
+#endif
 		}
 
 		/* Find default mode */
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index ca5f0dc2854..c6d7cc76516 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2507,6 +2507,25 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
 
 #endif /* CONFIG_PPC_OF */
 
+static void radeonfb_whack_power_state(struct radeonfb_info *rinfo, pci_power_t state)
+{
+	u16 pwr_cmd;
+
+	for (;;) {
+		pci_read_config_word(rinfo->pdev,
+				     rinfo->pm_reg+PCI_PM_CTRL,
+				     &pwr_cmd);
+		if (pwr_cmd & 2)
+			break;
+		pwr_cmd = (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2;
+		pci_write_config_word(rinfo->pdev,
+				      rinfo->pm_reg+PCI_PM_CTRL,
+				      pwr_cmd);
+		msleep(500);
+	}
+	rinfo->pdev->current_state = state;
+}
+
 static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 {
 	u32 tmp;
@@ -2558,6 +2577,11 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 		/* Switch PCI power management to D2. */
 		pci_disable_device(rinfo->pdev);
 		pci_save_state(rinfo->pdev);
+		/* The chip seems to need us to whack the PM register
+		 * repeatedly until it sticks. We do that -prior- to
+		 * calling pci_set_power_state()
+		 */
+		radeonfb_whack_power_state(rinfo, PCI_D2);
 		pci_set_power_state(rinfo->pdev, PCI_D2);
 	} else {
 		printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
@@ -2762,12 +2786,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 	return rc;
 }
 
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_OF__disabled
 static void radeonfb_early_resume(void *data)
 {
         struct radeonfb_info *rinfo = data;
 
 	rinfo->no_schedule = 1;
+	pci_restore_state(rinfo->pdev);
 	radeonfb_pci_resume(rinfo->pdev);
 	rinfo->no_schedule = 0;
 }
@@ -2834,7 +2859,14 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlis
 		 */
 		if (rinfo->pm_mode != radeon_pm_none) {
 			pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+       * others we now rely on the PCI core restoring the config space for us, which
+       * isn't the case with that hack, and that code path causes various things to
+       * be called with interrupts off while they shouldn't. I'm leaving the code in
+       * as it can be useful for debugging purposes
+       */
 			pmac_set_early_video_resume(radeonfb_early_resume, rinfo);
+#endif
 		}
 
 #if 0
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
new file mode 100644
index 00000000000..509cb92e873
--- /dev/null
+++ b/drivers/video/broadsheetfb.c
@@ -0,0 +1,568 @@
+/*
+ * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ *
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+
+#include <video/broadsheetfb.h>
+
+/* Display specific information */
+#define DPY_W 800
+#define DPY_H 600
+
+static struct fb_fix_screeninfo broadsheetfb_fix __devinitdata = {
+	.id =		"broadsheetfb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_STATIC_PSEUDOCOLOR,
+	.xpanstep =	0,
+	.ypanstep =	0,
+	.ywrapstep =	0,
+	.line_length =	DPY_W,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo broadsheetfb_var __devinitdata = {
+	.xres		= DPY_W,
+	.yres		= DPY_H,
+	.xres_virtual	= DPY_W,
+	.yres_virtual	= DPY_H,
+	.bits_per_pixel	= 8,
+	.grayscale	= 1,
+	.red =		{ 0, 4, 0 },
+	.green =	{ 0, 4, 0 },
+	.blue =		{ 0, 4, 0 },
+	.transp =	{ 0, 0, 0 },
+};
+
+/* main broadsheetfb functions */
+static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data)
+{
+	par->board->set_ctl(par, BS_WR, 0);
+	par->board->set_hdb(par, data);
+	par->board->set_ctl(par, BS_WR, 1);
+}
+
+static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data)
+{
+	par->board->set_ctl(par, BS_DC, 0);
+	broadsheet_issue_data(par, data);
+}
+
+static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+{
+	par->board->wait_for_rdy(par);
+
+	par->board->set_ctl(par, BS_CS, 0);
+	broadsheet_issue_cmd(par, data);
+	par->board->set_ctl(par, BS_DC, 1);
+	par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+					int argc, u16 *argv)
+{
+	int i;
+
+	par->board->wait_for_rdy(par);
+
+	par->board->set_ctl(par, BS_CS, 0);
+	broadsheet_issue_cmd(par, cmd);
+	par->board->set_ctl(par, BS_DC, 1);
+
+	for (i = 0; i < argc; i++)
+		broadsheet_issue_data(par, argv[i]);
+	par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+					u16 *data)
+{
+	int i;
+	u16 tmp;
+
+	par->board->set_ctl(par, BS_CS, 0);
+	par->board->set_ctl(par, BS_DC, 1);
+
+	for (i = 0; i < size; i++) {
+		par->board->set_ctl(par, BS_WR, 0);
+		tmp = (data[i] & 0x0F) << 4;
+		tmp |= (data[i] & 0x0F00) << 4;
+		par->board->set_hdb(par, tmp);
+		par->board->set_ctl(par, BS_WR, 1);
+	}
+
+	par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+{
+	u16 res;
+	/* wait for ready to go hi. (lo is busy) */
+	par->board->wait_for_rdy(par);
+
+	/* cs lo, dc lo for cmd, we lo for each data, db as usual */
+	par->board->set_ctl(par, BS_DC, 1);
+	par->board->set_ctl(par, BS_CS, 0);
+	par->board->set_ctl(par, BS_WR, 0);
+
+	res = par->board->get_hdb(par);
+
+	/* strobe wr */
+	par->board->set_ctl(par, BS_WR, 1);
+	par->board->set_ctl(par, BS_CS, 1);
+
+	return res;
+}
+
+static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+					u16 data)
+{
+	/* wait for ready to go hi. (lo is busy) */
+	par->board->wait_for_rdy(par);
+
+	/* cs lo, dc lo for cmd, we lo for each data, db as usual */
+	par->board->set_ctl(par, BS_CS, 0);
+
+	broadsheet_issue_cmd(par, BS_CMD_WR_REG);
+
+	par->board->set_ctl(par, BS_DC, 1);
+
+	broadsheet_issue_data(par, reg);
+	broadsheet_issue_data(par, data);
+
+	par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
+{
+	broadsheet_send_command(par, reg);
+	msleep(100);
+	return broadsheet_get_data(par);
+}
+
+static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
+{
+	u16 args[5];
+
+	args[0] = DPY_W;
+	args[1] = DPY_H;
+	args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */
+	args[3] = 2; /* gdrv cfg */
+	args[4] = (4 | (1 << 7)); /* lut index format */
+	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+	/* did the controller really set it? */
+	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+	args[0] = 4; /* fsync len */
+	args[1] = (10 << 8) | 4; /* fend/fbegin len */
+	args[2] = 10; /* line sync len */
+	args[3] = (100 << 8) | 4; /* line end/begin len */
+	args[4] = 6; /* pixel clock cfg */
+	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
+
+	/* setup waveform */
+	args[0] = 0x886;
+	args[1] = 0;
+	broadsheet_send_cmdargs(par, BS_CMD_RD_WFM_INFO, 2, args);
+
+	broadsheet_send_command(par, BS_CMD_UPD_GDRV_CLR);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	broadsheet_write_reg(par, 0x330, 0x84);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	args[0] = (0x3 << 4);
+	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+	args[0] = 0x154;
+	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+	broadsheet_burst_write(par, DPY_W*DPY_H/2,
+				(u16 *) par->info->screen_base);
+
+	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+	args[0] = 0x4300;
+	broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+	par->board->wait_for_rdy(par);
+}
+
+static void __devinit broadsheet_init(struct broadsheetfb_par *par)
+{
+	broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
+	/* the controller needs a second */
+	msleep(1000);
+	broadsheet_init_display(par);
+}
+
+static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
+						u16 y1, u16 y2)
+{
+	u16 args[5];
+	unsigned char *buf = (unsigned char *)par->info->screen_base;
+
+	/* y1 must be a multiple of 4 so drop the lower bits */
+	y1 &= 0xFFFC;
+	/* y2 must be a multiple of 4 , but - 1 so up the lower bits */
+	y2 |= 0x0003;
+
+	args[0] = 0x3 << 4;
+	args[1] = 0;
+	args[2] = y1;
+	args[3] = cpu_to_le16(par->info->var.xres);
+	args[4] = y2;
+	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG_AREA, 5, args);
+
+	args[0] = 0x154;
+	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+	buf += y1 * par->info->var.xres;
+	broadsheet_burst_write(par, ((1 + y2 - y1) * par->info->var.xres)/2,
+				(u16 *) buf);
+
+	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+	args[0] = 0x4300;
+	broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+	par->board->wait_for_rdy(par);
+
+}
+
+static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
+{
+	u16 args[5];
+
+	args[0] = 0x3 << 4;
+	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+	args[0] = 0x154;
+	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+	broadsheet_burst_write(par, DPY_W*DPY_H/2,
+				(u16 *) par->info->screen_base);
+
+	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+	args[0] = 0x4300;
+	broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+	par->board->wait_for_rdy(par);
+
+}
+
+/* this is called back from the deferred io workqueue */
+static void broadsheetfb_dpy_deferred_io(struct fb_info *info,
+				struct list_head *pagelist)
+{
+	u16 y1 = 0, h = 0;
+	int prev_index = -1;
+	struct page *cur;
+	struct fb_deferred_io *fbdefio = info->fbdefio;
+	int h_inc;
+	u16 yres = info->var.yres;
+	u16 xres = info->var.xres;
+
+	/* height increment is fixed per page */
+	h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
+
+	/* walk the written page list and swizzle the data */
+	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+		if (prev_index < 0) {
+			/* just starting so assign first page */
+			y1 = (cur->index << PAGE_SHIFT) / xres;
+			h = h_inc;
+		} else if ((prev_index + 1) == cur->index) {
+			/* this page is consecutive so increase our height */
+			h += h_inc;
+		} else {
+			/* page not consecutive, issue previous update first */
+			broadsheetfb_dpy_update_pages(info->par, y1, y1 + h);
+			/* start over with our non consecutive page */
+			y1 = (cur->index << PAGE_SHIFT) / xres;
+			h = h_inc;
+		}
+		prev_index = cur->index;
+	}
+
+	/* if we still have any pages to update we do so now */
+	if (h >= yres) {
+		/* its a full screen update, just do it */
+		broadsheetfb_dpy_update(info->par);
+	} else {
+		broadsheetfb_dpy_update_pages(info->par, y1,
+						min((u16) (y1 + h), yres));
+	}
+}
+
+static void broadsheetfb_fillrect(struct fb_info *info,
+				   const struct fb_fillrect *rect)
+{
+	struct broadsheetfb_par *par = info->par;
+
+	sys_fillrect(info, rect);
+
+	broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_copyarea(struct fb_info *info,
+				   const struct fb_copyarea *area)
+{
+	struct broadsheetfb_par *par = info->par;
+
+	sys_copyarea(info, area);
+
+	broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_imageblit(struct fb_info *info,
+				const struct fb_image *image)
+{
+	struct broadsheetfb_par *par = info->par;
+
+	sys_imageblit(info, image);
+
+	broadsheetfb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t broadsheetfb_write(struct fb_info *info, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	struct broadsheetfb_par *par = info->par;
+	unsigned long p = *ppos;
+	void *dst;
+	int err = 0;
+	unsigned long total_size;
+
+	if (info->state != FBINFO_STATE_RUNNING)
+		return -EPERM;
+
+	total_size = info->fix.smem_len;
+
+	if (p > total_size)
+		return -EFBIG;
+
+	if (count > total_size) {
+		err = -EFBIG;
+		count = total_size;
+	}
+
+	if (count + p > total_size) {
+		if (!err)
+			err = -ENOSPC;
+
+		count = total_size - p;
+	}
+
+	dst = (void *)(info->screen_base + p);
+
+	if (copy_from_user(dst, buf, count))
+		err = -EFAULT;
+
+	if  (!err)
+		*ppos += count;
+
+	broadsheetfb_dpy_update(par);
+
+	return (err) ? err : count;
+}
+
+static struct fb_ops broadsheetfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_read        = fb_sys_read,
+	.fb_write	= broadsheetfb_write,
+	.fb_fillrect	= broadsheetfb_fillrect,
+	.fb_copyarea	= broadsheetfb_copyarea,
+	.fb_imageblit	= broadsheetfb_imageblit,
+};
+
+static struct fb_deferred_io broadsheetfb_defio = {
+	.delay		= HZ/4,
+	.deferred_io	= broadsheetfb_dpy_deferred_io,
+};
+
+static int __devinit broadsheetfb_probe(struct platform_device *dev)
+{
+	struct fb_info *info;
+	struct broadsheet_board *board;
+	int retval = -ENOMEM;
+	int videomemorysize;
+	unsigned char *videomemory;
+	struct broadsheetfb_par *par;
+	int i;
+
+	/* pick up board specific routines */
+	board = dev->dev.platform_data;
+	if (!board)
+		return -EINVAL;
+
+	/* try to count device specific driver, if can't, platform recalls */
+	if (!try_module_get(board->owner))
+		return -ENODEV;
+
+	info = framebuffer_alloc(sizeof(struct broadsheetfb_par), &dev->dev);
+	if (!info)
+		goto err;
+
+	videomemorysize = (DPY_W*DPY_H);
+	videomemory = vmalloc(videomemorysize);
+	if (!videomemory)
+		goto err_fb_rel;
+
+	memset(videomemory, 0, videomemorysize);
+
+	info->screen_base = (char *)videomemory;
+	info->fbops = &broadsheetfb_ops;
+
+	info->var = broadsheetfb_var;
+	info->fix = broadsheetfb_fix;
+	info->fix.smem_len = videomemorysize;
+	par = info->par;
+	par->info = info;
+	par->board = board;
+	par->write_reg = broadsheet_write_reg;
+	par->read_reg = broadsheet_read_reg;
+	init_waitqueue_head(&par->waitq);
+
+	info->flags = FBINFO_FLAG_DEFAULT;
+
+	info->fbdefio = &broadsheetfb_defio;
+	fb_deferred_io_init(info);
+
+	retval = fb_alloc_cmap(&info->cmap, 16, 0);
+	if (retval < 0) {
+		dev_err(&dev->dev, "Failed to allocate colormap\n");
+		goto err_vfree;
+	}
+
+	/* set cmap */
+	for (i = 0; i < 16; i++)
+		info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/32;
+	memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*16);
+	memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*16);
+
+	retval = par->board->setup_irq(info);
+	if (retval < 0)
+		goto err_cmap;
+
+	/* this inits the dpy */
+	retval = board->init(par);
+	if (retval < 0)
+		goto err_free_irq;
+
+	broadsheet_init(par);
+
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err_free_irq;
+	platform_set_drvdata(dev, info);
+
+	printk(KERN_INFO
+	       "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
+	       info->node, videomemorysize >> 10);
+
+
+	return 0;
+
+err_free_irq:
+	board->cleanup(par);
+err_cmap:
+	fb_dealloc_cmap(&info->cmap);
+err_vfree:
+	vfree(videomemory);
+err_fb_rel:
+	framebuffer_release(info);
+err:
+	module_put(board->owner);
+	return retval;
+
+}
+
+static int __devexit broadsheetfb_remove(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	if (info) {
+		struct broadsheetfb_par *par = info->par;
+		unregister_framebuffer(info);
+		fb_deferred_io_cleanup(info);
+		par->board->cleanup(par);
+		fb_dealloc_cmap(&info->cmap);
+		vfree((void *)info->screen_base);
+		module_put(par->board->owner);
+		framebuffer_release(info);
+	}
+	return 0;
+}
+
+static struct platform_driver broadsheetfb_driver = {
+	.probe	= broadsheetfb_probe,
+	.remove = broadsheetfb_remove,
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "broadsheetfb",
+	},
+};
+
+static int __init broadsheetfb_init(void)
+{
+	return platform_driver_register(&broadsheetfb_driver);
+}
+
+static void __exit broadsheetfb_exit(void)
+{
+	platform_driver_unregister(&broadsheetfb_driver);
+}
+
+module_init(broadsheetfb_init);
+module_exit(broadsheetfb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Broadsheet controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 7a9e42e3a9a..83c5cefc266 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -46,8 +46,8 @@
 #include <linux/fb.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 
@@ -1425,7 +1425,7 @@ static void cyberpro_common_resume(struct cfb_info *cfb)
 
 #ifdef CONFIG_ARCH_SHARK
 
-#include <mach/hardware.h>
+#include <mach/framebuffer.h>
 
 static int __devinit cyberpro_vl_probe(void)
 {
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index a24e680d2b9..2e940199fc8 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -993,6 +993,7 @@ static int i810_check_params(struct fb_var_screeninfo *var,
 	struct i810fb_par *par = info->par;
 	int line_length, vidmem, mode_valid = 0, retval = 0;
 	u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
+
 	/*
 	 *  Memory limit
 	 */
@@ -1002,12 +1003,12 @@ static int i810_check_params(struct fb_var_screeninfo *var,
 	if (vidmem > par->fb.size) {
 		vyres = par->fb.size/line_length;
 		if (vyres < var->yres) {
-			vyres = yres;
+			vyres = info->var.yres;
 			vxres = par->fb.size/vyres;
 			vxres /= var->bits_per_pixel >> 3;
 			line_length = get_line_length(par, vxres, 
 						      var->bits_per_pixel);
-			vidmem = line_length * yres;
+			vidmem = line_length * info->var.yres;
 			if (vxres < var->xres) {
 				printk("i810fb: required video memory, "
 				       "%d bytes, for %dx%d-%d (virtual) "
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index d58c68cd456..bd1cb75cd14 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -14,7 +14,6 @@
  *	linux-arm-kernel@lists.arm.linux.org.uk
  */
 
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -44,7 +43,12 @@
 
 #define LCDC_SIZE	0x04
 #define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
+
+#ifdef CONFIG_ARCH_MX1
 #define SIZE_YMAX(y)	((y) & 0x1ff)
+#else
+#define SIZE_YMAX(y)	((y) & 0x3ff)
+#endif
 
 #define LCDC_VPW	0x08
 #define VPW_VPW(x)	((x) & 0x3ff)
@@ -54,7 +58,12 @@
 #define CPOS_CC0	(1<<30)
 #define CPOS_OP		(1<<28)
 #define CPOS_CXP(x)	(((x) & 3ff) << 16)
+
+#ifdef CONFIG_ARCH_MX1
 #define CPOS_CYP(y)	((y) & 0x1ff)
+#else
+#define CPOS_CYP(y)	((y) & 0x3ff)
+#endif
 
 #define LCDC_LCWHB	0x10
 #define LCWHB_BK_EN	(1<<31)
@@ -63,9 +72,16 @@
 #define LCWHB_BD(x)	((x) & 0xff)
 
 #define LCDC_LCHCC	0x14
+
+#ifdef CONFIG_ARCH_MX1
 #define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
 #define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
 #define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+#else
+#define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x3f)
+#endif
 
 #define LCDC_PCR	0x18
 
@@ -92,7 +108,13 @@
 /* bit fields in imxfb.h */
 
 #define LCDC_RMCR	0x34
+
+#ifdef CONFIG_ARCH_MX1
 #define RMCR_LCDC_EN	(1<<1)
+#else
+#define RMCR_LCDC_EN	0
+#endif
+
 #define RMCR_SELF_REF	(1<<0)
 
 #define LCDC_LCDICR	0x38
@@ -159,6 +181,17 @@ struct imxfb_info {
 #define MIN_XRES	64
 #define MIN_YRES	64
 
+/* Actually this really is 18bit support, the lowest 2 bits of each colour
+ * are unused in hardware. We claim to have 24bit support to make software
+ * like X work, which does not support 18bit.
+ */
+static struct imxfb_rgb def_rgb_18 = {
+	.red	= {.offset = 16, .length = 8,},
+	.green	= {.offset = 8, .length = 8,},
+	.blue	= {.offset = 0, .length = 8,},
+	.transp = {.offset = 0, .length = 0,},
+};
+
 static struct imxfb_rgb def_rgb_16_tft = {
 	.red	= {.offset = 11, .length = 5,},
 	.green	= {.offset = 5, .length = 6,},
@@ -286,6 +319,9 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 
 	pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
 	switch (var->bits_per_pixel) {
+	case 32:
+		rgb = &def_rgb_18;
+		break;
 	case 16:
 	default:
 		if (readl(fbi->regs + LCDC_PCR) & PCR_TFT)
@@ -327,9 +363,7 @@ static int imxfb_set_par(struct fb_info *info)
 	struct imxfb_info *fbi = info->par;
 	struct fb_var_screeninfo *var = &info->var;
 
-	pr_debug("set_par\n");
-
-	if (var->bits_per_pixel == 16)
+	if (var->bits_per_pixel == 16 || var->bits_per_pixel == 32)
 		info->fix.visual = FB_VISUAL_TRUECOLOR;
 	else if (!fbi->cmap_static)
 		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
@@ -354,10 +388,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
 	pr_debug("Enabling LCD controller\n");
 
-	/* initialize LCDC */
-	writel(readl(fbi->regs + LCDC_RMCR) & ~RMCR_LCDC_EN,
-		fbi->regs + LCDC_RMCR);	/* just to be safe... */
-
 	writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
 
 	/* physical screen start address	    */
@@ -465,9 +495,9 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			info->fix.id, var->lower_margin);
 #endif
 
-	writel(HCR_H_WIDTH(var->hsync_len) |
-		HCR_H_WAIT_1(var->right_margin) |
-		HCR_H_WAIT_2(var->left_margin),
+	writel(HCR_H_WIDTH(var->hsync_len - 1) |
+		HCR_H_WAIT_1(var->right_margin - 1) |
+		HCR_H_WAIT_2(var->left_margin - 3),
 		fbi->regs + LCDC_HCR);
 
 	writel(VCR_V_WIDTH(var->vsync_len) |
@@ -650,6 +680,12 @@ static int __init imxfb_probe(struct platform_device *pdev)
 		info->fix.smem_start = fbi->screen_dma;
 	}
 
+	if (pdata->init) {
+		ret = pdata->init(fbi->pdev);
+		if (ret)
+			goto failed_platform_init;
+	}
+
 	/*
 	 * This makes sure that our colour bitfield
 	 * descriptors are correctly initialised.
@@ -674,6 +710,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
 failed_register:
 	fb_dealloc_cmap(&info->cmap);
 failed_cmap:
+	if (pdata->exit)
+		pdata->exit(fbi->pdev);
+failed_platform_init:
 	if (!pdata->fixed_screen_cpu)
 		dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
 			fbi->map_dma);
@@ -691,6 +730,7 @@ failed_init:
 
 static int __devexit imxfb_remove(struct platform_device *pdev)
 {
+	struct imx_fb_platform_data *pdata;
 	struct fb_info *info = platform_get_drvdata(pdev);
 	struct imxfb_info *fbi = info->par;
 	struct resource *res;
@@ -701,6 +741,10 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	unregister_framebuffer(info);
 
+	pdata = pdev->dev.platform_data;
+	if (pdata->exit)
+		pdata->exit(fbi->pdev);
+
 	fb_dealloc_cmap(&info->cmap);
 	kfree(info->pseudo_palette);
 	framebuffer_release(info);
diff --git a/drivers/video/logo/logo_linux_clut224.ppm b/drivers/video/logo/logo_linux_clut224.ppm
index 3c14e43b82f..de93ff3fc1a 100644
--- a/drivers/video/logo/logo_linux_clut224.ppm
+++ b/drivers/video/logo/logo_linux_clut224.ppm
@@ -1,1604 +1,2828 @@
 P3
-# Standard 224-color Linux logo
-80 80
+145 113
 255
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6   6   6   6  10  10  10  10  10  10
- 10  10  10   6   6   6   6   6   6   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   6   6   6  10  10  10  14  14  14
- 22  22  22  26  26  26  30  30  30  34  34  34
- 30  30  30  30  30  30  26  26  26  18  18  18
- 14  14  14  10  10  10   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6  14  14  14  26  26  26  42  42  42
- 54  54  54  66  66  66  78  78  78  78  78  78
- 78  78  78  74  74  74  66  66  66  54  54  54
- 42  42  42  26  26  26  18  18  18  10  10  10
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   1   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 22  22  22  42  42  42  66  66  66  86  86  86
- 66  66  66  38  38  38  38  38  38  22  22  22
- 26  26  26  34  34  34  54  54  54  66  66  66
- 86  86  86  70  70  70  46  46  46  26  26  26
- 14  14  14   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   1   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  10  10  10  26  26  26
- 50  50  50  82  82  82  58  58  58   6   6   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  6   6   6  54  54  54  86  86  86  66  66  66
- 38  38  38  18  18  18   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   6   6   6  22  22  22  50  50  50
- 78  78  78  34  34  34   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   6   6   6  70  70  70
- 78  78  78  46  46  46  22  22  22   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   1   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6  18  18  18  42  42  42  82  82  82
- 26  26  26   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  14  14  14
- 46  46  46  34  34  34   6   6   6   2   2   6
- 42  42  42  78  78  78  42  42  42  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   1   0   0   0   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 10  10  10  30  30  30  66  66  66  58  58  58
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  26  26  26
- 86  86  86 101 101 101  46  46  46  10  10  10
-  2   2   6  58  58  58  70  70  70  34  34  34
- 10  10  10   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   1   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 14  14  14  42  42  42  86  86  86  10  10  10
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  30  30  30
- 94  94  94  94  94  94  58  58  58  26  26  26
-  2   2   6   6   6   6  78  78  78  54  54  54
- 22  22  22   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 22  22  22  62  62  62  62  62  62   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  26  26  26
- 54  54  54  38  38  38  18  18  18  10  10  10
-  2   2   6   2   2   6  34  34  34  82  82  82
- 38  38  38  14  14  14   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 30  30  30  78  78  78  30  30  30   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  10  10  10
- 10  10  10   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  78  78  78
- 50  50  50  18  18  18   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   1   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 38  38  38  86  86  86  14  14  14   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  54  54  54
- 66  66  66  26  26  26   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 42  42  42  82  82  82   2   2   6   2   2   6
-  2   2   6   6   6   6  10  10  10   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   6   6   6
- 14  14  14  10  10  10   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  18  18  18
- 82  82  82  34  34  34  10  10  10   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   1   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 46  46  46  86  86  86   2   2   6   2   2   6
-  6   6   6   6   6   6  22  22  22  34  34  34
-  6   6   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6  18  18  18  34  34  34
- 10  10  10  50  50  50  22  22  22   2   2   6
-  2   2   6   2   2   6   2   2   6  10  10  10
- 86  86  86  42  42  42  14  14  14   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   1   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 46  46  46  86  86  86   2   2   6   2   2   6
- 38  38  38 116 116 116  94  94  94  22  22  22
- 22  22  22   2   2   6   2   2   6   2   2   6
- 14  14  14  86  86  86 138 138 138 162 162 162
-154 154 154  38  38  38  26  26  26   6   6   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 86  86  86  46  46  46  14  14  14   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 46  46  46  86  86  86   2   2   6  14  14  14
-134 134 134 198 198 198 195 195 195 116 116 116
- 10  10  10   2   2   6   2   2   6   6   6   6
-101  98  89 187 187 187 210 210 210 218 218 218
-214 214 214 134 134 134  14  14  14   6   6   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 86  86  86  50  50  50  18  18  18   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   1   0   0   0
-  0   0   1   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 46  46  46  86  86  86   2   2   6  54  54  54
-218 218 218 195 195 195 226 226 226 246 246 246
- 58  58  58   2   2   6   2   2   6  30  30  30
-210 210 210 253 253 253 174 174 174 123 123 123
-221 221 221 234 234 234  74  74  74   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 70  70  70  58  58  58  22  22  22   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 46  46  46  82  82  82   2   2   6 106 106 106
-170 170 170  26  26  26  86  86  86 226 226 226
-123 123 123  10  10  10  14  14  14  46  46  46
-231 231 231 190 190 190   6   6   6  70  70  70
- 90  90  90 238 238 238 158 158 158   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 70  70  70  58  58  58  22  22  22   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   1   0   0   0
-  0   0   1   0   0   1   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 42  42  42  86  86  86   6   6   6 116 116 116
-106 106 106   6   6   6  70  70  70 149 149 149
-128 128 128  18  18  18  38  38  38  54  54  54
-221 221 221 106 106 106   2   2   6  14  14  14
- 46  46  46 190 190 190 198 198 198   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 74  74  74  62  62  62  22  22  22   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   1   0   0   0
-  0   0   1   0   0   0   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 42  42  42  94  94  94  14  14  14 101 101 101
-128 128 128   2   2   6  18  18  18 116 116 116
-118  98  46 121  92   8 121  92   8  98  78  10
-162 162 162 106 106 106   2   2   6   2   2   6
-  2   2   6 195 195 195 195 195 195   6   6   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 74  74  74  62  62  62  22  22  22   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   1   0   0   1
-  0   0   1   0   0   0   0   0   1   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 38  38  38  90  90  90  14  14  14  58  58  58
-210 210 210  26  26  26  54  38   6 154 114  10
-226 170  11 236 186  11 225 175  15 184 144  12
-215 174  15 175 146  61  37  26   9   2   2   6
- 70  70  70 246 246 246 138 138 138   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 70  70  70  66  66  66  26  26  26   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 38  38  38  86  86  86  14  14  14  10  10  10
-195 195 195 188 164 115 192 133   9 225 175  15
-239 182  13 234 190  10 232 195  16 232 200  30
-245 207  45 241 208  19 232 195  16 184 144  12
-218 194 134 211 206 186  42  42  42   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 50  50  50  74  74  74  30  30  30   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 34  34  34  86  86  86  14  14  14   2   2   6
-121  87  25 192 133   9 219 162  10 239 182  13
-236 186  11 232 195  16 241 208  19 244 214  54
-246 218  60 246 218  38 246 215  20 241 208  19
-241 208  19 226 184  13 121  87  25   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 50  50  50  82  82  82  34  34  34  10  10  10
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 34  34  34  82  82  82  30  30  30  61  42   6
-180 123   7 206 145  10 230 174  11 239 182  13
-234 190  10 238 202  15 241 208  19 246 218  74
-246 218  38 246 215  20 246 215  20 246 215  20
-226 184  13 215 174  15 184 144  12   6   6   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 26  26  26  94  94  94  42  42  42  14  14  14
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 30  30  30  78  78  78  50  50  50 104  69   6
-192 133   9 216 158  10 236 178  12 236 186  11
-232 195  16 241 208  19 244 214  54 245 215  43
-246 215  20 246 215  20 241 208  19 198 155  10
-200 144  11 216 158  10 156 118  10   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  6   6   6  90  90  90  54  54  54  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 30  30  30  78  78  78  46  46  46  22  22  22
-137  92   6 210 162  10 239 182  13 238 190  10
-238 202  15 241 208  19 246 215  20 246 215  20
-241 208  19 203 166  17 185 133  11 210 150  10
-216 158  10 210 150  10 102  78  10   2   2   6
-  6   6   6  54  54  54  14  14  14   2   2   6
-  2   2   6  62  62  62  74  74  74  30  30  30
- 10  10  10   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 34  34  34  78  78  78  50  50  50   6   6   6
- 94  70  30 139 102  15 190 146  13 226 184  13
-232 200  30 232 195  16 215 174  15 190 146  13
-168 122  10 192 133   9 210 150  10 213 154  11
-202 150  34 182 157 106 101  98  89   2   2   6
-  2   2   6  78  78  78 116 116 116  58  58  58
-  2   2   6  22  22  22  90  90  90  46  46  46
- 18  18  18   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 38  38  38  86  86  86  50  50  50   6   6   6
-128 128 128 174 154 114 156 107  11 168 122  10
-198 155  10 184 144  12 197 138  11 200 144  11
-206 145  10 206 145  10 197 138  11 188 164 115
-195 195 195 198 198 198 174 174 174  14  14  14
-  2   2   6  22  22  22 116 116 116 116 116 116
- 22  22  22   2   2   6  74  74  74  70  70  70
- 30  30  30  10  10  10   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  18  18  18
- 50  50  50 101 101 101  26  26  26  10  10  10
-138 138 138 190 190 190 174 154 114 156 107  11
-197 138  11 200 144  11 197 138  11 192 133   9
-180 123   7 190 142  34 190 178 144 187 187 187
-202 202 202 221 221 221 214 214 214  66  66  66
-  2   2   6   2   2   6  50  50  50  62  62  62
-  6   6   6   2   2   6  10  10  10  90  90  90
- 50  50  50  18  18  18   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  10  10  10  34  34  34
- 74  74  74  74  74  74   2   2   6   6   6   6
-144 144 144 198 198 198 190 190 190 178 166 146
-154 121  60 156 107  11 156 107  11 168 124  44
-174 154 114 187 187 187 190 190 190 210 210 210
-246 246 246 253 253 253 253 253 253 182 182 182
-  6   6   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  62  62  62
- 74  74  74  34  34  34  14  14  14   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  10  10  10  22  22  22  54  54  54
- 94  94  94  18  18  18   2   2   6  46  46  46
-234 234 234 221 221 221 190 190 190 190 190 190
-190 190 190 187 187 187 187 187 187 190 190 190
-190 190 190 195 195 195 214 214 214 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
- 82  82  82   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  14  14  14
- 86  86  86  54  54  54  22  22  22   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6  18  18  18  46  46  46  90  90  90
- 46  46  46  18  18  18   6   6   6 182 182 182
-253 253 253 246 246 246 206 206 206 190 190 190
-190 190 190 190 190 190 190 190 190 190 190 190
-206 206 206 231 231 231 250 250 250 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-202 202 202  14  14  14   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 42  42  42  86  86  86  42  42  42  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 14  14  14  38  38  38  74  74  74  66  66  66
-  2   2   6   6   6   6  90  90  90 250 250 250
-253 253 253 253 253 253 238 238 238 198 198 198
-190 190 190 190 190 190 195 195 195 221 221 221
-246 246 246 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253  82  82  82   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6  78  78  78  70  70  70  34  34  34
- 14  14  14   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 34  34  34  66  66  66  78  78  78   6   6   6
-  2   2   6  18  18  18 218 218 218 253 253 253
-253 253 253 253 253 253 253 253 253 246 246 246
-226 226 226 231 231 231 246 246 246 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 178 178 178   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6  18  18  18  90  90  90  62  62  62
- 30  30  30  10  10  10   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  10  10  10  26  26  26
- 58  58  58  90  90  90  18  18  18   2   2   6
-  2   2   6 110 110 110 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-250 250 250 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 231 231 231  18  18  18   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6  18  18  18  94  94  94
- 54  54  54  26  26  26  10  10  10   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   6   6   6  22  22  22  50  50  50
- 90  90  90  26  26  26   2   2   6   2   2   6
- 14  14  14 195 195 195 250 250 250 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-250 250 250 242 242 242  54  54  54   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6  38  38  38
- 86  86  86  50  50  50  22  22  22   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6  14  14  14  38  38  38  82  82  82
- 34  34  34   2   2   6   2   2   6   2   2   6
- 42  42  42 195 195 195 246 246 246 253 253 253
-253 253 253 253 253 253 253 253 253 250 250 250
-242 242 242 242 242 242 250 250 250 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 250 250 250 246 246 246 238 238 238
-226 226 226 231 231 231 101 101 101   6   6   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
- 38  38  38  82  82  82  42  42  42  14  14  14
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 10  10  10  26  26  26  62  62  62  66  66  66
-  2   2   6   2   2   6   2   2   6   6   6   6
- 70  70  70 170 170 170 206 206 206 234 234 234
-246 246 246 250 250 250 250 250 250 238 238 238
-226 226 226 231 231 231 238 238 238 250 250 250
-250 250 250 250 250 250 246 246 246 231 231 231
-214 214 214 206 206 206 202 202 202 202 202 202
-198 198 198 202 202 202 182 182 182  18  18  18
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6  62  62  62  66  66  66  30  30  30
- 10  10  10   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 14  14  14  42  42  42  82  82  82  18  18  18
-  2   2   6   2   2   6   2   2   6  10  10  10
- 94  94  94 182 182 182 218 218 218 242 242 242
-250 250 250 253 253 253 253 253 253 250 250 250
-234 234 234 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 246 246 246
-238 238 238 226 226 226 210 210 210 202 202 202
-195 195 195 195 195 195 210 210 210 158 158 158
-  6   6   6  14  14  14  50  50  50  14  14  14
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   6   6   6  86  86  86  46  46  46
- 18  18  18   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 22  22  22  54  54  54  70  70  70   2   2   6
-  2   2   6  10  10  10   2   2   6  22  22  22
-166 166 166 231 231 231 250 250 250 253 253 253
-253 253 253 253 253 253 253 253 253 250 250 250
-242 242 242 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 246 246 246
-231 231 231 206 206 206 198 198 198 226 226 226
- 94  94  94   2   2   6   6   6   6  38  38  38
- 30  30  30   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6  62  62  62  66  66  66
- 26  26  26  10  10  10   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 30  30  30  74  74  74  50  50  50   2   2   6
- 26  26  26  26  26  26   2   2   6 106 106 106
-238 238 238 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 246 246 246 218 218 218 202 202 202
-210 210 210  14  14  14   2   2   6   2   2   6
- 30  30  30  22  22  22   2   2   6   2   2   6
-  2   2   6   2   2   6  18  18  18  86  86  86
- 42  42  42  14  14  14   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 42  42  42  90  90  90  22  22  22   2   2   6
- 42  42  42   2   2   6  18  18  18 218 218 218
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 250 250 250 221 221 221
-218 218 218 101 101 101   2   2   6  14  14  14
- 18  18  18  38  38  38  10  10  10   2   2   6
-  2   2   6   2   2   6   2   2   6  78  78  78
- 58  58  58  22  22  22   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  18  18  18
- 54  54  54  82  82  82   2   2   6  26  26  26
- 22  22  22   2   2   6 123 123 123 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 250 250 250
-238 238 238 198 198 198   6   6   6  38  38  38
- 58  58  58  26  26  26  38  38  38   2   2   6
-  2   2   6   2   2   6   2   2   6  46  46  46
- 78  78  78  30  30  30  10  10  10   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  10  10  10  30  30  30
- 74  74  74  58  58  58   2   2   6  42  42  42
-  2   2   6  22  22  22 231 231 231 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 250 250 250
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 246 246 246  46  46  46  38  38  38
- 42  42  42  14  14  14  38  38  38  14  14  14
-  2   2   6   2   2   6   2   2   6   6   6   6
- 86  86  86  46  46  46  14  14  14   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   6   6   6  14  14  14  42  42  42
- 90  90  90  18  18  18  18  18  18  26  26  26
-  2   2   6 116 116 116 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 250 250 250 238 238 238
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253  94  94  94   6   6   6
-  2   2   6   2   2   6  10  10  10  34  34  34
-  2   2   6   2   2   6   2   2   6   2   2   6
- 74  74  74  58  58  58  22  22  22   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  10  10  10  26  26  26  66  66  66
- 82  82  82   2   2   6  38  38  38   6   6   6
- 14  14  14 210 210 210 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 246 246 246 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 144 144 144   2   2   6
-  2   2   6   2   2   6   2   2   6  46  46  46
-  2   2   6   2   2   6   2   2   6   2   2   6
- 42  42  42  74  74  74  30  30  30  10  10  10
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6  14  14  14  42  42  42  90  90  90
- 26  26  26   6   6   6  42  42  42   2   2   6
- 74  74  74 250 250 250 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 242 242 242 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 182 182 182   2   2   6
-  2   2   6   2   2   6   2   2   6  46  46  46
-  2   2   6   2   2   6   2   2   6   2   2   6
- 10  10  10  86  86  86  38  38  38  10  10  10
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 10  10  10  26  26  26  66  66  66  82  82  82
-  2   2   6  22  22  22  18  18  18   2   2   6
-149 149 149 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 206 206 206   2   2   6
-  2   2   6   2   2   6   2   2   6  38  38  38
-  2   2   6   2   2   6   2   2   6   2   2   6
-  6   6   6  86  86  86  46  46  46  14  14  14
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 18  18  18  46  46  46  86  86  86  18  18  18
-  2   2   6  34  34  34  10  10  10   6   6   6
-210 210 210 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 221 221 221   6   6   6
-  2   2   6   2   2   6   6   6   6  30  30  30
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6  82  82  82  54  54  54  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 26  26  26  66  66  66  62  62  62   2   2   6
-  2   2   6  38  38  38  10  10  10  26  26  26
-238 238 238 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 238 238 238
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231   6   6   6
-  2   2   6   2   2   6  10  10  10  30  30  30
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6  66  66  66  58  58  58  22  22  22
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 38  38  38  78  78  78   6   6   6   2   2   6
-  2   2   6  46  46  46  14  14  14  42  42  42
-246 246 246 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234  10  10  10
-  2   2   6   2   2   6  22  22  22  14  14  14
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6  66  66  66  62  62  62  22  22  22
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  18  18  18
- 50  50  50  74  74  74   2   2   6   2   2   6
- 14  14  14  70  70  70  34  34  34  62  62  62
-250 250 250 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 246 246 246
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234  14  14  14
-  2   2   6   2   2   6  30  30  30   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6  66  66  66  62  62  62  22  22  22
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  18  18  18
- 54  54  54  62  62  62   2   2   6   2   2   6
-  2   2   6  30  30  30  46  46  46  70  70  70
-250 250 250 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 246 246 246
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 226 226 226  10  10  10
-  2   2   6   6   6   6  30  30  30   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6  66  66  66  58  58  58  22  22  22
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  22  22  22
- 58  58  58  62  62  62   2   2   6   2   2   6
-  2   2   6   2   2   6  30  30  30  78  78  78
-250 250 250 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 246 246 246
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 206 206 206   2   2   6
- 22  22  22  34  34  34  18  14   6  22  22  22
- 26  26  26  18  18  18   6   6   6   2   2   6
-  2   2   6  82  82  82  54  54  54  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  26  26  26
- 62  62  62 106 106 106  74  54  14 185 133  11
-210 162  10 121  92   8   6   6   6  62  62  62
-238 238 238 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 246 246 246
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 158 158 158  18  18  18
- 14  14  14   2   2   6   2   2   6   2   2   6
-  6   6   6  18  18  18  66  66  66  38  38  38
-  6   6   6  94  94  94  50  50  50  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 10  10  10  10  10  10  18  18  18  38  38  38
- 78  78  78 142 134 106 216 158  10 242 186  14
-246 190  14 246 190  14 156 118  10  10  10  10
- 90  90  90 238 238 238 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 250 250 250
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 246 230 190
-238 204  91 238 204  91 181 142  44  37  26   9
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6  38  38  38  46  46  46
- 26  26  26 106 106 106  54  54  54  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   6   6   6  14  14  14  22  22  22
- 30  30  30  38  38  38  50  50  50  70  70  70
-106 106 106 190 142  34 226 170  11 242 186  14
-246 190  14 246 190  14 246 190  14 154 114  10
-  6   6   6  74  74  74 226 226 226 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 250 250 250
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 228 184  62
-241 196  14 241 208  19 232 195  16  38  30  10
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   6   6   6  30  30  30  26  26  26
-203 166  17 154 142  90  66  66  66  26  26  26
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6  18  18  18  38  38  38  58  58  58
- 78  78  78  86  86  86 101 101 101 123 123 123
-175 146  61 210 150  10 234 174  13 246 186  14
-246 190  14 246 190  14 246 190  14 238 190  10
-102  78  10   2   2   6  46  46  46 198 198 198
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 224 178  62
-242 186  14 241 196  14 210 166  10  22  18   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   6   6   6 121  92   8
-238 202  15 232 195  16  82  82  82  34  34  34
- 10  10  10   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 14  14  14  38  38  38  70  70  70 154 122  46
-190 142  34 200 144  11 197 138  11 197 138  11
-213 154  11 226 170  11 242 186  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-225 175  15  46  32   6   2   2   6  22  22  22
-158 158 158 250 250 250 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 250 250 250 242 242 242 224 178  62
-239 182  13 236 186  11 213 154  11  46  32   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6  61  42   6 225 175  15
-238 190  10 236 186  11 112 100  78  42  42  42
- 14  14  14   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 22  22  22  54  54  54 154 122  46 213 154  11
-226 170  11 230 174  11 226 170  11 226 170  11
-236 178  12 242 186  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-241 196  14 184 144  12  10  10  10   2   2   6
-  6   6   6 116 116 116 242 242 242 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 231 231 231 198 198 198 214 170  54
-236 178  12 236 178  12 210 150  10 137  92   6
- 18  14   6   2   2   6   2   2   6   2   2   6
-  6   6   6  70  47   6 200 144  11 236 178  12
-239 182  13 239 182  13 124 112  88  58  58  58
- 22  22  22   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 30  30  30  70  70  70 180 133  36 226 170  11
-239 182  13 242 186  14 242 186  14 246 186  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 232 195  16  98  70   6   2   2   6
-  2   2   6   2   2   6  66  66  66 221 221 221
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 206 206 206 198 198 198 214 166  58
-230 174  11 230 174  11 216 158  10 192 133   9
-163 110   8 116  81   8 102  78  10 116  81   8
-167 114   7 197 138  11 226 170  11 239 182  13
-242 186  14 242 186  14 162 146  94  78  78  78
- 34  34  34  14  14  14   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 30  30  30  78  78  78 190 142  34 226 170  11
-239 182  13 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 241 196  14 203 166  17  22  18   6
-  2   2   6   2   2   6   2   2   6  38  38  38
-218 218 218 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-250 250 250 206 206 206 198 198 198 202 162  69
-226 170  11 236 178  12 224 166  10 210 150  10
-200 144  11 197 138  11 192 133   9 197 138  11
-210 150  10 226 170  11 242 186  14 246 190  14
-246 190  14 246 186  14 225 175  15 124 112  88
- 62  62  62  30  30  30  14  14  14   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 30  30  30  78  78  78 174 135  50 224 166  10
-239 182  13 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 241 196  14 139 102  15
-  2   2   6   2   2   6   2   2   6   2   2   6
- 78  78  78 250 250 250 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-250 250 250 214 214 214 198 198 198 190 150  46
-219 162  10 236 178  12 234 174  13 224 166  10
-216 158  10 213 154  11 213 154  11 216 158  10
-226 170  11 239 182  13 246 190  14 246 190  14
-246 190  14 246 190  14 242 186  14 206 162  42
-101 101 101  58  58  58  30  30  30  14  14  14
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 30  30  30  74  74  74 174 135  50 216 158  10
-236 178  12 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 241 196  14 226 184  13
- 61  42   6   2   2   6   2   2   6   2   2   6
- 22  22  22 238 238 238 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 226 226 226 187 187 187 180 133  36
-216 158  10 236 178  12 239 182  13 236 178  12
-230 174  11 226 170  11 226 170  11 230 174  11
-236 178  12 242 186  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 186  14 239 182  13
-206 162  42 106 106 106  66  66  66  34  34  34
- 14  14  14   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 26  26  26  70  70  70 163 133  67 213 154  11
-236 178  12 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 241 196  14
-190 146  13  18  14   6   2   2   6   2   2   6
- 46  46  46 246 246 246 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 221 221 221  86  86  86 156 107  11
-216 158  10 236 178  12 242 186  14 246 186  14
-242 186  14 239 182  13 239 182  13 242 186  14
-242 186  14 246 186  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-242 186  14 225 175  15 142 122  72  66  66  66
- 30  30  30  10  10  10   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 26  26  26  70  70  70 163 133  67 210 150  10
-236 178  12 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-232 195  16 121  92   8  34  34  34 106 106 106
-221 221 221 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-242 242 242  82  82  82  18  14   6 163 110   8
-216 158  10 236 178  12 242 186  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 242 186  14 163 133  67
- 46  46  46  18  18  18   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  10  10  10
- 30  30  30  78  78  78 163 133  67 210 150  10
-236 178  12 246 186  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-241 196  14 215 174  15 190 178 144 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 218 218 218
- 58  58  58   2   2   6  22  18   6 167 114   7
-216 158  10 236 178  12 246 186  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 186  14 242 186  14 190 150  46
- 54  54  54  22  22  22   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 38  38  38  86  86  86 180 133  36 213 154  11
-236 178  12 246 186  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 232 195  16 190 146  13 214 214 214
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 250 250 250 170 170 170  26  26  26
-  2   2   6   2   2   6  37  26   9 163 110   8
-219 162  10 239 182  13 246 186  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 186  14 236 178  12 224 166  10 142 122  72
- 46  46  46  18  18  18   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  18  18  18
- 50  50  50 109 106  95 192 133   9 224 166  10
-242 186  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-242 186  14 226 184  13 210 162  10 142 110  46
-226 226 226 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-198 198 198  66  66  66   2   2   6   2   2   6
-  2   2   6   2   2   6  50  34   6 156 107  11
-219 162  10 239 182  13 246 186  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 242 186  14
-234 174  13 213 154  11 154 122  46  66  66  66
- 30  30  30  10  10  10   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  22  22  22
- 58  58  58 154 121  60 206 145  10 234 174  13
-242 186  14 246 186  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 186  14 236 178  12 210 162  10 163 110   8
- 61  42   6 138 138 138 218 218 218 250 250 250
-253 253 253 253 253 253 253 253 253 250 250 250
-242 242 242 210 210 210 144 144 144  66  66  66
-  6   6   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6  61  42   6 163 110   8
-216 158  10 236 178  12 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 239 182  13 230 174  11 216 158  10
-190 142  34 124 112  88  70  70  70  38  38  38
- 18  18  18   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  22  22  22
- 62  62  62 168 124  44 206 145  10 224 166  10
-236 178  12 239 182  13 242 186  14 242 186  14
-246 186  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 236 178  12 216 158  10 175 118   6
- 80  54   7   2   2   6   6   6   6  30  30  30
- 54  54  54  62  62  62  50  50  50  38  38  38
- 14  14  14   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   6   6   6  80  54   7 167 114   7
-213 154  11 236 178  12 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 190  14 242 186  14 239 182  13 239 182  13
-230 174  11 210 150  10 174 135  50 124 112  88
- 82  82  82  54  54  54  34  34  34  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  18  18  18
- 50  50  50 158 118  36 192 133   9 200 144  11
-216 158  10 219 162  10 224 166  10 226 170  11
-230 174  11 236 178  12 239 182  13 239 182  13
-242 186  14 246 186  14 246 190  14 246 190  14
-246 190  14 246 190  14 246 190  14 246 190  14
-246 186  14 230 174  11 210 150  10 163 110   8
-104  69   6  10  10  10   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   6   6   6  91  60   6 167 114   7
-206 145  10 230 174  11 242 186  14 246 190  14
-246 190  14 246 190  14 246 186  14 242 186  14
-239 182  13 230 174  11 224 166  10 213 154  11
-180 133  36 124 112  88  86  86  86  58  58  58
- 38  38  38  22  22  22  10  10  10   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  14  14  14
- 34  34  34  70  70  70 138 110  50 158 118  36
-167 114   7 180 123   7 192 133   9 197 138  11
-200 144  11 206 145  10 213 154  11 219 162  10
-224 166  10 230 174  11 239 182  13 242 186  14
-246 186  14 246 186  14 246 186  14 246 186  14
-239 182  13 216 158  10 185 133  11 152  99   6
-104  69   6  18  14   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   2   2   6   2   2   6   2   2   6
-  2   2   6   6   6   6  80  54   7 152  99   6
-192 133   9 219 162  10 236 178  12 239 182  13
-246 186  14 242 186  14 239 182  13 236 178  12
-224 166  10 206 145  10 192 133   9 154 121  60
- 94  94  94  62  62  62  42  42  42  22  22  22
- 14  14  14   6   6   6   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 18  18  18  34  34  34  58  58  58  78  78  78
-101  98  89 124 112  88 142 110  46 156 107  11
-163 110   8 167 114   7 175 118   6 180 123   7
-185 133  11 197 138  11 210 150  10 219 162  10
-226 170  11 236 178  12 236 178  12 234 174  13
-219 162  10 197 138  11 163 110   8 130  83   6
- 91  60   6  10  10  10   2   2   6   2   2   6
- 18  18  18  38  38  38  38  38  38  38  38  38
- 38  38  38  38  38  38  38  38  38  38  38  38
- 38  38  38  38  38  38  26  26  26   2   2   6
-  2   2   6   6   6   6  70  47   6 137  92   6
-175 118   6 200 144  11 219 162  10 230 174  11
-234 174  13 230 174  11 219 162  10 210 150  10
-192 133   9 163 110   8 124 112  88  82  82  82
- 50  50  50  30  30  30  14  14  14   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6  14  14  14  22  22  22  34  34  34
- 42  42  42  58  58  58  74  74  74  86  86  86
-101  98  89 122 102  70 130  98  46 121  87  25
-137  92   6 152  99   6 163 110   8 180 123   7
-185 133  11 197 138  11 206 145  10 200 144  11
-180 123   7 156 107  11 130  83   6 104  69   6
- 50  34   6  54  54  54 110 110 110 101  98  89
- 86  86  86  82  82  82  78  78  78  78  78  78
- 78  78  78  78  78  78  78  78  78  78  78  78
- 78  78  78  82  82  82  86  86  86  94  94  94
-106 106 106 101 101 101  86  66  34 124  80   6
-156 107  11 180 123   7 192 133   9 200 144  11
-206 145  10 200 144  11 192 133   9 175 118   6
-139 102  15 109 106  95  70  70  70  42  42  42
- 22  22  22  10  10  10   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   6   6   6  10  10  10
- 14  14  14  22  22  22  30  30  30  38  38  38
- 50  50  50  62  62  62  74  74  74  90  90  90
-101  98  89 112 100  78 121  87  25 124  80   6
-137  92   6 152  99   6 152  99   6 152  99   6
-138  86   6 124  80   6  98  70   6  86  66  30
-101  98  89  82  82  82  58  58  58  46  46  46
- 38  38  38  34  34  34  34  34  34  34  34  34
- 34  34  34  34  34  34  34  34  34  34  34  34
- 34  34  34  34  34  34  38  38  38  42  42  42
- 54  54  54  82  82  82  94  86  76  91  60   6
-134  86   6 156 107  11 167 114   7 175 118   6
-175 118   6 167 114   7 152  99   6 121  87  25
-101  98  89  62  62  62  34  34  34  18  18  18
-  6   6   6   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   6   6   6   6   6   6  10  10  10
- 18  18  18  22  22  22  30  30  30  42  42  42
- 50  50  50  66  66  66  86  86  86 101  98  89
-106  86  58  98  70   6 104  69   6 104  69   6
-104  69   6  91  60   6  82  62  34  90  90  90
- 62  62  62  38  38  38  22  22  22  14  14  14
- 10  10  10  10  10  10  10  10  10  10  10  10
- 10  10  10  10  10  10   6   6   6  10  10  10
- 10  10  10  10  10  10  10  10  10  14  14  14
- 22  22  22  42  42  42  70  70  70  89  81  66
- 80  54   7 104  69   6 124  80   6 137  92   6
-134  86   6 116  81   8 100  82  52  86  86  86
- 58  58  58  30  30  30  14  14  14   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   6   6   6  10  10  10  14  14  14
- 18  18  18  26  26  26  38  38  38  54  54  54
- 70  70  70  86  86  86  94  86  76  89  81  66
- 89  81  66  86  86  86  74  74  74  50  50  50
- 30  30  30  14  14  14   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6  18  18  18  34  34  34  58  58  58
- 82  82  82  89  81  66  89  81  66  89  81  66
- 94  86  66  94  86  76  74  74  74  50  50  50
- 26  26  26  14  14  14   6   6   6   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  6   6   6   6   6   6  14  14  14  18  18  18
- 30  30  30  38  38  38  46  46  46  54  54  54
- 50  50  50  42  42  42  30  30  30  18  18  18
- 10  10  10   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   6   6   6  14  14  14  26  26  26
- 38  38  38  50  50  50  58  58  58  58  58  58
- 54  54  54  42  42  42  30  30  30  18  18  18
- 10  10  10   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
-  6   6   6  10  10  10  14  14  14  18  18  18
- 18  18  18  14  14  14  10  10  10   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   6   6   6
- 14  14  14  18  18  18  22  22  22  22  22  22
- 18  18  18  14  14  14  10  10  10   6   6   6
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  3 4 4  6 7 7
+8 10 10  8 10 10  6 8 8  6 7 7  3 4 4  2 2 2
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  4 5 5  17 18 17
+27 29 28  35 37 36  40 43 41  43 45 43  40 43 41  37 39 37
+32 34 33  27 30 29  23 25 24  17 21 21  15 18 18  12 15 15
+11 13 13  8 10 10  6 7 7  3 4 4  1 1 1  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  13 13 13  32 34 33  49 51 48  60 60 56  58 59 55
+55 57 54  55 56 53  49 51 48  43 45 43  39 40 39  33 37 35
+28 31 30  23 27 26  20 23 23  17 20 20  14 17 17  13 16 16
+11 14 14  10 13 13  10 12 12  9 11 11  8 10 10  6 7 7
+2 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  6 7 7  12 15 15
+12 15 15  8 9 9  2 3 3  0 0 0  1 1 1  25 27 26
+55 56 53  68 70 65  65 66 61  65 66 61  63 64 60  63 64 60
+58 59 55  51 52 50  47 48 46  41 42 42  35 37 36  30 32 31
+26 28 27  20 24 24  18 22 22  16 19 19  14 17 17  13 16 16
+12 15 15  11 14 14  10 13 13  10 12 12  9 11 11  8 10 10
+8 9 9  6 8 8  3 3 3  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  6 7 7  20 24 24  23 27 26
+23 27 26  18 22 22  11 13 13  23 24 24  61 63 57  72 73 67
+72 73 67  68 70 65  68 70 65  68 70 65  63 64 60  58 59 55
+55 56 53  47 48 46  41 42 42  35 37 36  30 32 31  26 28 27
+20 24 24  18 22 22  16 20 20  15 19 19  14 17 17  13 16 16
+12 15 15  12 15 15  11 14 14  10 13 13  10 12 12  9 11 11
+8 10 10  8 9 9  7 9 9  6 7 7  1 2 2  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  1 1 1  4 5 5  5 6 5  4 5 5
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  15 19 19  40 41 39  53 55 47
+33 36 34  27 30 29  51 52 50  72 73 67  72 73 67  72 73 67
+72 73 67  68 70 65  68 70 65  63 64 60  58 59 55  51 52 50
+47 48 46  40 43 41  33 37 35  30 32 31  26 28 27  20 24 24
+18 22 22  17 21 21  16 19 19  14 18 18  14 17 17  13 17 17
+13 16 16  12 15 15  12 15 15  11 14 14  10 13 13  10 12 12
+9 11 11  8 10 10  8 9 9  7 9 9  6 8 8  3 4 4
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+2 2 2  6 8 8  10 12 12  10 12 12  10 12 12  10 12 12
+6 8 8  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  20 23 23  71 71 57  131 127 93
+115 113 82  63 64 60  72 73 67  72 73 67  72 73 67  72 73 67
+68 70 65  65 66 61  61 63 57  55 57 54  49 51 48  43 45 43
+39 40 39  33 36 34  28 31 30  23 27 26  20 24 24  20 23 23
+17 21 21  16 20 20  15 19 19  15 18 18  14 18 18  14 17 17
+13 17 17  13 16 16  12 15 15  12 15 15  11 14 14  10 13 13
+10 12 12  9 11 11  8 10 10  7 9 9  7 9 9  6 8 8
+4 5 5  0 0 0  0 0 0  0 0 0  1 1 1  6 7 7
+10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
+10 12 12  3 4 4  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  18 22 22  71 71 57  144 139 99
+84 83 72  68 70 65  72 73 67  72 73 67  68 70 65  65 66 61
+63 64 60  55 57 54  51 52 50  47 48 46  40 43 41  35 37 36
+30 32 31  27 29 28  23 27 26  20 24 24  18 22 22  17 21 21
+16 20 20  15 19 19  15 19 19  15 19 19  15 18 18  14 18 18
+14 17 17  13 17 17  13 16 16  12 15 15  12 15 15  11 14 14
+10 13 13  9 12 12  9 11 11  8 10 10  7 9 9  6 8 8
+6 8 8  3 4 4  0 0 0  2 2 2  8 10 10  10 12 12
+10 12 12  10 12 12  11 13 13  36 38 35  61 61 53  48 49 45
+10 12 12  7 9 9  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  15 19 19  61 61 53  84 83 72
+68 70 65  72 73 67  68 70 65  68 70 65  63 64 60  58 59 55
+51 52 50  47 48 46  41 42 42  37 39 37  32 35 33  28 31 30
+23 27 26  20 24 24  20 23 23  18 22 22  17 21 21  17 21 21
+17 21 21  17 21 21  17 20 20  16 20 20  16 20 20  16 19 19
+15 18 18  14 18 18  13 17 17  13 16 16  12 15 15  12 15 15
+11 14 14  10 13 13  9 12 12  9 11 11  8 10 10  7 9 9
+6 8 8  6 8 8  5 6 5  9 11 11  10 12 12  10 12 12
+19 20 18  82 81 62  149 145 103  160 154 106  142 137 94  96 95 69
+10 12 12  10 12 12  1 1 1  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  10 12 12  44 46 43  68 70 65
+72 73 67  68 70 65  68 70 65  63 64 60  55 57 54  49 51 48
+43 45 43  39 40 39  33 37 35  30 32 31  26 28 27  23 27 26
+20 24 24  18 22 22  18 22 22  18 22 22  18 22 22  20 23 23
+20 24 24  23 25 24  23 25 24  22 24 23  20 23 23  18 22 22
+17 20 20  15 19 19  15 18 18  14 17 17  13 16 16  12 15 15
+11 14 14  11 13 13  10 12 12  9 11 11  8 10 10  8 9 9
+7 9 9  7 9 9  10 12 12  10 12 12  10 12 12  71 71 57
+164 159 111  186 182 128  186 182 128  171 165 117  151 147 98  96 95 69
+10 12 12  10 12 12  3 3 3  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  8 10 10  63 64 60  68 70 65
+72 73 67  68 70 65  63 64 60  55 57 54  47 48 46  40 43 41
+33 37 35  30 32 31  27 29 28  23 27 26  20 24 24  20 23 23
+18 22 22  18 22 22  20 23 22  21 25 23  23 27 26  27 29 28
+28 31 30  31 33 31  31 33 31  31 33 31  28 31 30  26 28 27
+23 25 24  20 23 22  16 20 20  15 18 18  14 17 17  13 16 16
+12 15 15  11 14 14  10 13 13  10 12 12  9 11 11  8 10 10
+10 12 12  10 13 13  10 12 12  12 14 14  96 95 69  165 161 109
+186 182 128  192 187 134  192 187 134  176 171 126  160 154 106  103 101 77
+10 12 12  10 12 12  5 6 5  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  35 37 36  68 70 65  72 73 67
+68 70 65  65 66 61  58 59 55  49 51 48  40 43 41  33 37 35
+28 31 30  23 27 26  20 24 24  20 23 23  18 22 22  18 22 22
+18 22 22  20 23 23  23 27 26  27 30 29  32 35 33  37 39 37
+40 43 41  44 46 43  46 47 43  44 46 43  40 43 41  36 38 35
+31 33 31  27 29 28  22 24 23  17 21 21  15 18 18  14 17 17
+13 16 16  12 15 15  11 14 14  11 14 14  11 13 13  13 16 16
+13 16 16  11 14 14  10 12 12  79 78 62  142 137 94  164 159 111
+178 174 128  192 187 134  192 187 134  176 171 126  160 154 106  96 95 69
+10 12 12  10 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  55 57 54  68 70 65  72 73 67
+68 70 65  63 64 60  55 56 53  43 45 43  35 37 36  28 31 30
+23 27 26  20 24 24  18 22 22  17 21 21  17 21 21  17 21 21
+20 24 24  25 27 26  31 33 31  38 39 37  46 47 43  53 55 47
+61 61 53  66 65 55  66 65 55  66 65 55  61 61 53  53 55 47
+46 47 43  37 39 37  30 33 30  24 26 24  17 21 21  15 18 18
+13 17 17  12 15 15  12 15 15  13 16 16  14 18 18  14 18 18
+14 17 17  12 15 15  30 31 28  118 116 76  134 131 96  160 154 106
+174 170 121  178 174 128  178 174 128  171 165 117  151 147 98  96 95 69
+10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  63 64 60  68 70 65  68 70 65
+65 66 61  58 59 55  49 51 48  39 40 39  30 32 31  23 27 26
+20 24 24  18 22 22  17 21 21  16 20 20  17 21 21  20 23 23
+25 27 26  32 35 33  43 44 41  53 55 47  66 65 55  75 75 61
+82 81 62  84 83 72  87 86 72  87 86 72  82 81 62  75 75 61
+66 65 55  53 55 47  40 41 39  31 33 31  23 25 24  17 20 20
+14 18 18  13 16 16  12 15 15  12 15 15  13 17 17  14 18 18
+14 18 18  13 16 16  46 47 43  96 95 69  125 122 87  142 137 94
+160 154 106  165 161 109  164 159 111  155 149 109  142 137 94  75 75 61
+10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  60 60 56  68 70 65  68 70 65
+63 64 60  55 57 54  46 47 45  35 37 36  27 30 29  23 25 24
+18 22 22  17 21 21  16 20 20  17 21 21  18 22 22  23 27 26
+31 33 31  43 44 41  55 56 53  71 71 57  84 83 72  92 91 72
+103 101 77  92 91 72  82 81 62  82 81 62  87 86 72  92 91 72
+84 83 72  71 71 57  55 56 53  43 44 41  30 33 30  22 24 23
+16 19 19  14 17 17  12 15 15  12 15 15  13 16 16  14 18 18
+14 18 18  14 17 17  43 44 41  82 81 62  118 116 76  125 122 87
+142 137 94  144 139 99  144 139 99  134 131 96  118 116 76  53 55 47
+10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  47 48 46  63 64 60  63 64 60
+55 57 54  49 51 48  40 43 41  32 34 33  26 28 27  20 24 24
+18 22 22  16 20 20  16 20 20  17 21 21  20 24 24  28 31 30
+40 41 39  53 55 47  75 75 61  90 89 73  87 86 72  48 49 45
+14 14 13  2 2 2  1 2 2  1 1 1  1 1 1  2 2 2
+19 20 18  43 44 41  66 65 55  53 55 47  38 39 37  26 28 27
+18 22 22  14 18 18  13 16 16  12 15 15  12 15 15  13 17 17
+14 18 18  14 18 18  30 31 28  66 65 55  96 95 69  103 101 77
+118 116 76  118 116 76  118 116 76  118 116 76  103 101 77  36 38 35
+10 12 12  10 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  28 31 30  55 57 54  51 52 50
+49 51 48  41 42 42  35 37 36  28 31 30  23 27 26  20 23 23
+17 21 21  16 20 20  16 20 20  18 22 22  23 27 26  33 36 34
+48 49 45  71 71 57  82 81 62  43 44 41  8 9 9  6 7 7
+6 7 7  6 7 7  6 7 7  5 6 5  4 5 5  3 4 4
+2 3 3  1 2 2  4 5 4  36 38 35  48 49 45  32 35 33
+21 25 23  16 19 19  13 17 17  12 15 15  12 15 15  13 16 16
+14 18 18  14 18 18  16 18 16  36 38 35  61 61 53  82 81 62
+96 95 69  96 95 69  96 95 69  96 95 69  79 78 62  19 20 18
+10 12 12  10 12 12  4 5 5  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  13 13 13  46 47 45  43 45 43
+40 43 41  35 37 36  30 32 31  23 27 26  20 24 24  18 22 22
+17 21 21  16 20 20  17 21 21  20 23 23  27 30 29  40 41 39
+61 61 53  53 55 47  16 17 16  9 11 11  10 12 12  10 12 12
+10 12 12  10 12 12  10 12 12  9 11 11  8 10 10  8 9 9
+6 8 8  5 6 5  4 5 5  2 3 3  19 20 18  38 39 37
+26 28 27  17 21 21  14 17 17  13 16 16  12 15 15  12 15 15
+13 17 17  14 18 18  12 15 15  13 12 7  30 31 28  46 47 43
+53 55 47  66 65 55  66 65 55  53 55 47  36 38 35  10 12 12
+10 12 12  10 12 12  2 3 3  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  1 1 1  33 37 35  35 37 36
+32 35 33  28 31 30  23 27 26  20 24 24  18 22 22  17 21 21
+16 20 20  16 20 20  17 21 21  21 25 23  31 33 31  44 46 43
+31 33 31  11 13 13  12 14 14  12 15 15  13 16 16  14 17 17
+14 17 17  14 17 17  14 17 17  13 16 16  12 15 15  12 14 14
+11 13 13  9 11 11  8 10 10  6 8 8  4 5 5  17 18 17
+30 33 30  20 23 22  15 18 18  13 16 16  12 15 15  12 14 14
+13 16 16  14 17 17  14 18 18  11 12 11  7 7 5  16 17 12
+21 22 20  30 31 28  25 27 25  21 22 20  14 14 13  10 12 12
+10 12 12  9 11 11  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  18 22 22  27 30 29
+27 29 28  40 41 39  53 55 47  53 55 47  53 55 47  46 47 43
+25 27 25  16 20 20  17 21 21  23 25 24  31 33 31  20 20 20
+12 15 15  14 17 17  15 19 19  16 20 20  17 21 21  18 22 22
+18 22 22  18 22 22  18 22 22  17 21 21  17 21 21  16 19 19
+15 18 18  13 16 16  12 15 15  10 12 12  8 10 10  6 8 8
+21 22 21  22 24 23  15 19 19  13 17 17  13 16 16  12 15 15
+12 15 15  13 17 17  14 18 18  14 18 18  13 15 14  10 9 6
+7 7 5  7 7 5  7 7 5  9 11 11  10 12 12  10 12 12
+10 12 12  6 7 7  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  16 17 12  82 81 62
+118 116 76  118 116 76  161 156 96  161 156 96  161 156 96  118 116 76
+118 116 76  96 95 69  53 55 47  22 24 23  14 17 17  13 16 16
+15 19 19  17 21 21  18 22 22  20 24 24  20 24 24  23 27 26
+23 27 26  23 27 26  23 27 26  23 27 26  23 27 26  20 24 24
+20 23 23  17 21 21  16 19 19  14 17 17  12 15 15  10 12 12
+9 11 11  20 23 22  16 19 19  14 17 17  13 16 16  12 15 15
+11 14 14  13 16 16  14 17 17  14 18 18  14 17 17  12 15 15
+10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
+9 11 11  1 1 1  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  53 55 47  161 156 96
+161 156 96  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  161 156 96  118 116 76  96 95 69  21 22 20  16 19 19
+18 22 22  20 24 24  23 27 26  23 27 26  26 28 27  27 30 29
+27 30 29  18 22 22  12 14 14  8 10 10  9 11 11  17 21 21
+23 27 26  23 27 26  20 24 24  18 22 22  16 20 20  14 17 17
+12 14 14  14 17 17  16 20 20  14 17 17  13 17 17  13 16 16
+12 15 15  12 15 15  13 17 17  14 18 18  14 17 17  13 16 16
+11 13 13  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
+4 5 5  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  13 12 7  118 116 76  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  161 156 96  118 116 76  30 31 28
+20 24 24  23 27 26  27 30 29  28 31 30  30 32 31  23 27 26
+16 19 19  17 21 21  12 15 15  9 11 11  10 12 12  9 11 11
+20 24 24  28 31 30  26 28 27  23 27 26  20 24 24  17 21 21
+15 19 19  13 16 16  16 19 19  14 18 18  14 17 17  13 16 16
+12 15 15  11 14 14  13 16 16  14 17 17  14 18 18  14 17 17
+12 15 15  10 12 12  10 12 12  10 12 12  10 12 12  8 9 9
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  82 81 62  161 156 96  230 229 82
+230 229 82  233 233 100  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  118 116 76
+27 29 28  27 30 29  30 32 31  30 32 31  23 27 26  20 24 24
+26 28 27  17 21 21  6 7 7  72 73 67  145 141 105  15 15 15
+14 17 17  33 37 35  30 32 31  28 31 30  26 28 27  23 27 26
+20 23 23  16 20 20  15 19 19  14 18 18  14 17 17  13 16 16
+12 15 15  11 14 14  12 15 15  13 17 17  14 18 18  14 17 17
+13 16 16  11 13 13  10 12 12  10 12 12  9 11 11  1 1 1
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  16 17 12  161 156 96  230 229 82  230 229 82
+243 242 120  235 234 117  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
+82 81 62  28 31 30  28 31 30  27 30 29  28 31 30  30 32 31
+33 37 35  13 16 16  3 3 3  105 104 92  210 208 158  12 14 14
+17 21 21  33 37 35  33 37 35  32 35 33  30 32 31  27 30 29
+23 27 26  20 23 23  17 20 20  15 18 18  14 18 18  13 17 17
+13 16 16  12 15 15  11 14 14  13 16 16  14 17 17  14 18 18
+13 17 17  12 15 15  10 12 12  10 12 12  3 4 4  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  96 95 69  230 229 82  230 229 82  244 244 132
+241 241 143  243 242 120  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+161 156 96  46 47 43  32 35 33  33 37 35  33 37 35  33 37 35
+40 43 41  23 27 26  1 1 1  2 2 2  24 26 24  14 17 17
+23 27 26  33 37 35  33 37 35  33 37 35  33 37 35  30 32 31
+27 30 29  23 27 26  20 23 23  15 18 18  14 18 18  14 17 17
+13 16 16  12 15 15  11 14 14  12 15 15  13 17 17  14 17 17
+14 17 17  13 16 16  11 13 13  6 8 8  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  16 17 12  161 156 96  230 229 82  235 234 117  239 239 170
+239 239 170  236 236 101  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  118 116 76  33 37 35  33 37 35  37 39 37  37 39 37
+43 45 43  49 51 48  20 24 24  8 10 10  17 20 20  35 37 36
+33 37 35  40 43 41  37 39 37  35 37 36  33 37 35  33 37 35
+30 32 31  27 30 29  23 27 26  15 19 19  14 18 18  14 17 17
+13 17 17  13 16 16  12 15 15  11 14 14  13 16 16  14 17 17
+14 17 17  13 17 17  11 14 14  4 5 5  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  96 95 69  230 229 82  230 229 82  239 239 170  251 251 187
+241 241 143  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  161 156 96  36 38 35  33 37 35  33 37 35  33 37 35
+37 39 37  47 48 46  55 57 54  55 57 54  49 51 48  43 45 43
+43 45 43  43 45 43  40 43 41  40 43 41  37 39 37  33 37 35
+33 37 35  28 31 30  26 28 27  16 20 20  15 18 18  14 18 18
+14 17 17  13 16 16  12 15 15  11 14 14  12 15 15  13 17 17
+14 17 17  14 17 17  8 10 10  5 7 7  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+16 17 12  230 229 82  230 229 82  243 242 120  251 251 187  251 251 187
+246 246 123  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  66 65 55  30 32 31  32 35 33  33 37 35
+33 37 35  37 39 37  40 43 41  47 48 46  49 51 48  51 52 50
+55 57 54  55 57 54  51 52 50  47 48 46  43 45 43  39 40 39
+33 37 35  30 32 31  26 28 27  17 21 21  15 19 19  14 18 18
+14 17 17  13 16 16  12 15 15  12 14 14  11 14 14  13 16 16
+14 17 17  12 15 15  7 9 9  6 8 8  1 1 1  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+96 95 69  230 229 82  230 229 82  239 239 170  251 251 187  239 239 170
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  96 95 69  27 30 29  28 31 30  30 32 31
+33 37 35  40 43 41  46 47 45  55 57 54  63 64 60  72 73 67
+72 73 67  72 73 67  72 73 67  65 66 61  55 57 54  47 48 46
+39 40 39  32 35 33  27 30 29  17 21 21  15 19 19  15 18 18
+14 18 18  13 17 17  13 16 16  12 15 15  11 14 14  12 14 14
+13 16 16  9 11 11  7 9 9  9 11 11  66 65 55  115 113 82
+21 22 20  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  13 12 7
+230 229 82  230 229 82  236 236 101  251 251 187  251 251 187  246 246 123
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  118 116 76  23 27 26  26 28 27  32 35 33
+51 52 50  90 89 73  110 109 94  145 141 105  168 163 120  177 172 135
+177 172 135  188 184 146  188 184 146  181 176 137  194 191 148  188 184 146
+184 179 149  188 184 146  188 184 146  156 151 111  177 172 135  181 176 137
+177 172 135  168 163 120  168 163 120  158 153 112  156 151 111  158 153 112
+156 151 111  158 153 112  177 172 135  188 184 146  188 184 146  194 189 146
+36 38 35  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  82 81 62
+230 229 82  230 229 82  244 244 132  251 251 187  244 244 132  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  82 81 62
+96 95 69  230 229 82  181 178 103  110 109 94  156 151 111  188 184 146
+188 184 146  197 193 154  188 184 146  184 181 136  188 184 146  168 163 120
+168 163 120  178 174 128  156 151 111  158 153 112  174 170 121  156 151 111
+156 151 111  158 153 112  156 151 111  168 163 120  178 174 128  181 176 137
+176 171 126  178 174 128  184 181 136  176 171 126  178 174 128  184 181 136
+176 171 126  178 174 128  184 181 136  164 159 111  155 149 109  96 95 69
+1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  2 2 1  161 156 96
+230 229 82  230 229 82  244 244 132  244 244 132  236 236 101  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  46 47 43  82 81 62
+158 153 112  197 193 154  194 189 146  184 181 136  188 184 146  168 163 120
+156 151 111  137 133 100  131 127 93  137 133 100  137 133 100  158 153 112
+121 119 87  137 133 100  156 151 111  145 141 105  99 98 80  84 83 72
+63 64 60  52 53 49  40 43 41  33 36 34  36 38 35  36 38 35
+38 39 37  43 44 41  43 44 41  46 47 43  48 49 45  48 49 45
+46 47 43  36 38 35  30 31 28  19 20 18  6 7 7  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  36 38 35  230 229 82
+230 229 82  230 229 82  246 246 123  236 236 101  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  53 55 47  121 119 87
+176 171 126  171 165 117  161 156 96  82 81 62  53 55 47  33 37 35
+39 40 39  63 64 60  99 98 80  121 119 87  137 133 100  177 172 135
+176 171 126  184 181 136  131 127 93  131 127 93  110 109 94  84 83 72
+51 52 50  39 40 39  27 29 28  18 22 22  16 19 19  15 19 19
+15 19 19  14 18 18  14 17 17  13 16 16  12 15 15  11 14 14
+10 13 13  9 12 12  9 11 11  8 9 9  7 9 9  1 1 1
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  118 116 76  230 229 82
+230 229 82  230 229 82  236 236 101  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  96 95 69  71 71 57
+36 38 35  118 116 76  118 116 76  12 15 15  15 18 18  20 24 24
+33 37 35  55 56 53  84 83 72  110 109 94  145 141 105  110 109 94
+168 163 120  121 119 87  156 151 111  131 127 93  87 86 72  61 63 57
+47 48 46  28 31 30  18 22 22  15 19 19  15 18 18  15 19 19
+15 19 19  14 18 18  14 17 17  13 17 17  13 16 16  12 15 15
+11 13 13  10 12 12  9 11 11  8 10 10  7 9 9  3 3 3
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  1 1 0  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
+161 156 96  230 229 82  118 116 76  11 14 14  14 17 17  18 22 22
+27 30 29  40 43 41  60 60 56  84 83 72  105 104 92  110 109 94
+110 109 94  110 109 94  99 98 80  90 89 73  68 70 65  47 48 46
+32 34 33  23 25 24  20 23 23  17 21 21  15 19 19  14 17 17
+15 19 19  15 18 18  14 18 18  13 17 17  13 16 16  12 15 15
+11 14 14  10 12 12  9 11 11  8 10 10  7 9 9  4 5 5
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  16 17 12  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  161 156 96  118 116 76  11 13 13  13 16 16  15 19 19
+20 24 24  30 32 31  40 43 41  51 52 50  63 64 60  72 73 67
+65 66 61  65 66 61  65 66 61  55 57 54  46 47 45  33 37 35
+27 29 28  20 24 24  17 21 21  16 20 20  16 20 20  15 19 19
+15 19 19  15 19 19  14 18 18  14 17 17  13 16 16  12 15 15
+11 14 14  10 13 13  9 12 12  8 10 10  7 9 9  6 7 7
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  53 55 47  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+161 156 96  118 116 76  53 55 47  10 13 13  12 15 15  14 17 17
+17 20 20  20 24 24  27 29 28  32 34 33  37 39 37  40 43 41
+43 45 43  41 42 42  35 37 36  30 32 31  28 31 30  23 27 26
+20 23 23  17 21 21  16 20 20  16 20 20  16 20 20  16 19 19
+15 19 19  15 19 19  14 18 18  14 17 17  13 16 16  12 15 15
+11 14 14  10 13 13  9 12 12  9 11 11  8 10 10  10 12 12
+1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  82 81 62  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  161 156 96
+118 116 76  82 81 62  13 14 12  10 13 13  12 15 15  13 17 17
+15 19 19  16 20 20  20 23 23  20 24 24  23 27 26  26 28 27
+26 28 27  26 28 27  23 27 26  18 22 22  20 23 23  17 21 21
+17 21 21  16 20 20  16 20 20  16 20 20  16 20 20  16 19 19
+15 19 19  15 19 19  15 18 18  14 17 17  13 17 17  13 16 16
+12 15 15  12 14 14  12 14 14  12 14 14  12 14 14  23 24 24
+6 8 8  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  118 116 76  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  161 156 96  161 156 96  118 116 76
+71 71 57  13 14 12  9 12 12  10 13 13  12 15 15  13 17 17
+15 18 18  15 19 19  16 20 20  17 21 21  17 21 21  18 22 22
+18 22 22  18 22 22  17 21 21  16 19 19  15 18 18  14 18 18
+16 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+15 19 19  15 19 19  15 18 18  14 18 18  16 20 20  23 25 24
+17 21 21  25 27 26  47 48 46  47 48 46  51 52 50  72 73 67
+33 36 34  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  118 116 76  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  161 156 96  118 116 76  118 116 76  46 47 43
+9 11 11  9 11 11  10 12 12  11 13 13  12 15 15  14 17 17
+15 18 18  15 19 19  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+15 19 19  16 20 20  20 24 24  55 56 53  32 34 33  84 83 72
+90 89 73  110 109 94  110 109 94  105 104 92  110 109 94  110 109 94
+72 73 67  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  96 95 69  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  161 156 96  118 116 76  82 81 62  16 17 12  9 11 11
+9 11 11  9 12 12  10 13 13  12 14 14  13 16 16  14 18 18
+15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 19 19  33 36 34  99 98 80  156 151 111  145 141 105  184 179 149
+168 163 120  184 179 149  177 172 135  156 151 111  145 141 105  110 109 94
+90 89 73  2 2 2  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  71 71 57  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
+230 229 82  161 156 96  230 229 82  230 229 82  230 229 82  161 156 96
+118 116 76  82 81 62  30 31 28  9 11 11  9 11 11  9 11 11
+10 12 12  10 13 13  11 14 14  13 16 16  14 17 17  15 18 18
+15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+18 22 22  58 59 55  137 133 100  197 193 154  214 212 158  210 208 158
+197 193 154  184 179 149  184 179 149  137 133 100  110 109 94  99 98 80
+84 83 72  10 10 9  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  16 17 12  230 229 82  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
+161 156 96  161 156 96  161 156 96  161 156 96  118 116 76  71 71 57
+21 22 20  12 14 14  11 13 13  10 12 12  10 12 12  10 13 13
+11 13 13  12 15 15  13 16 16  14 17 17  14 18 18  15 19 19
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  17 21 21
+23 27 26  84 83 72  184 179 149  251 251 187  210 208 158  184 179 149
+184 179 149  156 151 111  110 109 94  84 83 72  63 64 60  51 52 50
+18 22 22  6 8 8  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  118 116 76  230 229 82
+230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  161 156 96
+161 156 96  161 156 96  118 116 76  53 55 47  20 23 22  16 19 19
+13 16 16  12 15 15  12 14 14  11 14 14  11 14 14  11 14 14
+12 15 15  13 16 16  14 17 17  15 19 19  16 20 20  17 21 21
+23 27 26  18 22 22  20 24 24  23 27 26  30 32 31  17 21 21
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+23 27 26  33 37 35  137 133 100  156 151 111  158 153 112  105 104 92
+105 104 92  68 70 65  39 40 39  18 22 22  12 14 14  12 15 15
+9 11 11  4 5 5  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  16 17 12  230 229 82
+230 229 82  230 229 82  230 229 82  161 156 96  118 116 76  118 116 76
+118 116 76  66 65 55  43 45 43  32 34 33  25 27 26  20 23 22
+17 20 20  15 18 18  14 17 17  15 18 18  13 16 16  14 17 17
+14 18 18  16 20 20  32 34 33  55 57 54  58 59 55  72 73 67
+105 104 92  55 57 54  65 66 61  63 64 60  40 43 41  33 37 35
+41 42 42  20 24 24  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+17 21 21  26 28 27  30 32 31  35 37 36  68 70 65  39 40 39
+23 27 26  15 18 18  13 16 16  11 14 14  9 12 12  8 10 10
+7 9 9  6 7 7  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  36 38 35
+230 229 82  230 229 82  230 229 82  96 95 69  30 31 28  49 51 48
+90 89 73  68 70 65  55 57 54  47 48 46  47 48 46  43 45 43
+32 34 33  43 45 43  43 45 43  23 27 26  25 27 26  40 43 41
+40 43 41  90 89 73  110 109 94  145 141 105  156 151 111  156 151 111
+184 179 149  184 179 149  177 172 135  184 179 149  137 133 100  84 83 72
+105 104 92  63 64 60  49 51 48  47 48 46  28 31 30  18 22 22
+16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  15 19 19  15 19 19  15 19 19  18 22 22  15 19 19
+13 16 16  12 15 15  11 14 14  10 13 13  9 12 12  9 11 11
+8 10 10  6 8 8  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+30 31 28  230 229 82  71 71 57  2 2 1  0 0 0  58 59 55
+105 104 92  84 83 72  65 66 61  84 83 72  110 109 94  110 109 94
+145 141 105  105 104 92  110 109 94  110 109 94  84 83 72  110 109 94
+158 153 112  197 193 154  197 193 154  239 239 170  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  197 193 154
+197 193 154  184 179 149  145 141 105  137 133 100  105 104 92  47 48 46
+20 23 23  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 19 19  15 19 19  15 19 19  14 18 18  14 17 17
+13 17 17  13 16 16  12 14 14  12 14 14  13 13 13  13 13 13
+13 13 13  12 12 12  10 10 9  6 7 7  2 2 2  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  1 1 0  0 0 0  0 0 0  65 66 61
+105 104 92  84 83 72  84 83 72  110 109 94  184 179 149  210 208 158
+210 208 158  210 208 158  214 212 158  197 193 154  214 212 158  210 208 158
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  251 251 187  239 239 170  251 251 187  184 179 149  84 83 72
+26 28 27  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  15 19 19  15 19 19  15 18 18  14 18 18
+13 17 17  13 16 16  15 15 15  14 14 13  14 14 13  14 14 13
+13 13 13  13 13 13  12 12 12  12 12 12  12 12 12  3 4 4
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  72 73 67
+105 104 92  99 98 80  84 83 72  99 98 80  177 172 135  197 193 154
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  214 212 158  197 193 154  99 98 80
+23 27 26  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  15 19 19  15 19 19  15 18 18  14 18 18
+14 17 17  16 16 16  16 16 16  16 16 16  15 15 15  14 14 13
+14 14 13  13 13 13  13 13 13  12 12 12  12 12 12  12 12 12
+3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  84 83 72
+110 109 94  99 98 80  72 73 67  63 64 60  99 98 80  177 172 135
+184 179 149  210 208 158  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  210 208 158  184 179 149  177 172 135  110 109 94  33 37 35
+17 21 21  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+16 20 20  16 20 20  15 19 19  15 19 19  15 19 19  14 18 18
+15 18 18  18 19 18  18 19 18  17 17 17  16 16 16  15 15 15
+14 14 13  13 13 13  13 13 13  12 12 12  12 12 12  12 12 12
+10 10 9  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  2 2 2  105 104 92
+108 107 93  99 98 80  72 73 67  63 64 60  51 52 50  87 86 72
+105 104 92  110 109 94  108 107 93  156 151 111  184 179 149  184 179 149
+197 193 154  197 193 154  197 193 154  184 179 149  184 179 149  177 172 135
+197 193 154  156 151 111  177 172 135  184 179 149  168 163 120  137 133 100
+145 141 105  110 109 94  99 98 80  47 48 46  55 57 54  15 19 19
+16 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
+17 20 20  17 21 21  16 20 20  16 19 19  15 19 19  16 19 19
+20 20 20  21 22 21  20 20 20  19 20 19  18 19 18  16 16 16
+15 15 15  14 14 13  13 13 13  13 13 13  12 12 12  12 12 12
+12 12 12  4 5 5  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  58 59 55  110 109 94
+105 104 92  90 89 73  72 73 67  55 57 54  43 45 43  39 40 39
+43 45 43  46 47 45  43 45 43  68 70 65  65 66 61  63 64 60
+108 107 93  72 73 67  105 104 92  90 89 73  72 73 67  40 43 41
+72 73 67  68 70 65  68 70 65  58 59 55  63 64 60  49 51 48
+43 45 43  33 36 34  27 30 29  20 24 24  16 20 20  15 19 19
+15 19 19  15 19 19  15 19 19  16 19 19  16 20 20  16 20 20
+17 21 21  20 24 24  20 23 22  17 21 21  17 20 20  20 20 20
+21 22 21  21 22 21  21 22 21  21 22 21  20 20 20  18 19 18
+16 16 16  15 15 15  13 13 13  13 13 13  12 12 12  12 12 12
+12 12 12  10 10 9  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  21 22 21  110 109 94  110 109 94
+105 104 92  84 83 72  68 70 65  51 52 50  41 42 42  33 37 35
+28 31 30  23 27 26  20 23 23  18 22 22  17 20 20  25 27 26
+26 28 27  27 30 29  25 27 26  20 23 23  23 27 26  30 32 31
+20 24 24  17 21 21  18 22 22  15 19 19  26 28 27  20 23 23
+14 18 18  15 19 19  15 18 18  15 19 19  15 19 19  15 19 19
+15 19 19  15 19 19  15 19 19  15 19 19  15 19 19  16 19 19
+16 20 20  22 24 23  24 26 24  22 24 23  20 23 22  22 24 23
+24 26 24  24 26 24  23 24 24  22 24 23  21 22 21  19 20 19
+17 17 17  15 15 15  14 14 13  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  2 2 2  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  2 2 2  99 98 80  110 109 94  108 107 93
+105 104 92  84 83 72  63 64 60  49 51 48  39 40 39  32 34 33
+27 30 29  23 25 24  20 23 23  17 20 20  15 19 19  14 18 18
+14 17 17  13 17 17  13 17 17  13 17 17  13 17 17  13 17 17
+14 17 17  14 17 17  14 17 17  14 17 17  14 17 17  14 17 17
+14 18 18  14 18 18  14 18 18  14 18 18  15 18 18  15 19 19
+15 19 19  15 19 19  15 19 19  15 19 19  15 19 19  15 19 19
+15 19 19  17 21 21  27 29 28  26 28 27  25 27 26  25 27 26
+27 29 28  27 29 28  26 28 27  24 26 24  21 22 21  20 20 20
+18 19 18  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  4 5 5  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  51 52 50  110 109 94  110 109 94  105 104 92
+90 89 73  72 73 67  55 57 54  43 45 43  35 37 36  30 32 31
+26 28 27  20 24 24  17 21 21  16 19 19  15 18 18  14 17 17
+13 16 16  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
+13 16 16  13 16 16  13 16 16  13 17 17  13 17 17  14 17 17
+14 17 17  14 17 17  14 17 17  14 18 18  14 18 18  14 18 18
+15 18 18  15 18 18  15 19 19  15 19 19  15 19 19  15 19 19
+15 19 19  15 19 19  27 29 28  32 34 33  28 31 30  27 29 28
+30 32 31  30 32 31  30 31 28  26 28 27  23 24 24  21 22 21
+19 20 19  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  3 3 3  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  10 10 9  108 107 93  110 109 94  108 107 93  99 98 80
+84 83 72  63 64 60  49 51 48  40 43 41  33 36 34  27 30 29
+23 27 26  18 22 22  17 20 20  15 18 18  14 17 17  13 16 16
+13 16 16  13 16 16  12 15 15  12 15 15  12 15 15  12 15 15
+13 16 16  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
+13 17 17  13 17 17  14 17 17  14 17 17  14 17 17  14 18 18
+14 18 18  14 18 18  15 18 18  15 18 18  15 19 19  15 19 19
+15 19 19  15 19 19  17 21 21  33 36 34  32 34 33  31 33 31
+33 36 34  33 36 34  31 33 31  27 29 28  25 27 26  21 22 21
+19 20 19  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  63 64 60  137 133 100  43 45 43  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  68 70 65  110 109 94  110 109 94  105 104 92  84 83 72
+68 70 65  55 57 54  43 45 43  35 37 36  30 32 31  26 28 27
+20 24 24  17 21 21  16 19 19  14 17 17  13 16 16  12 15 15
+12 15 15  12 15 15  12 15 15  12 15 15  12 15 15  12 15 15
+12 15 15  12 15 15  12 15 15  12 15 15  12 15 15  13 16 16
+13 16 16  13 16 16  13 16 16  13 17 17  13 17 17  14 17 17
+14 17 17  14 17 17  14 18 18  14 18 18  14 18 18  15 18 18
+15 19 19  15 19 19  15 19 19  20 24 24  32 34 33  35 37 36
+37 39 37  35 37 36  33 36 34  30 32 31  26 28 27  22 24 23
+20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+1 1 1  99 98 80  184 179 149  184 179 149  68 70 65  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+15 15 15  110 109 94  110 109 94  108 107 93  99 98 80  72 73 67
+61 63 57  49 51 48  39 40 39  33 36 34  27 30 29  23 25 24
+18 22 22  16 19 19  14 17 17  13 16 16  12 15 15  12 15 15
+11 14 14  11 14 14  11 14 14  11 14 14  11 14 14  11 14 14
+11 14 14  11 14 14  12 14 14  12 15 15  12 15 15  12 15 15
+12 15 15  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
+13 17 17  14 17 17  14 17 17  14 17 17  14 18 18  14 18 18
+14 18 18  15 18 18  15 19 19  15 19 19  30 32 31  38 39 37
+39 40 39  39 40 39  35 37 36  31 33 31  27 29 28  22 24 23
+20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 3 3
+110 109 94  197 193 154  210 208 158  184 179 149  68 70 65  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+68 70 65  110 109 94  110 109 94  105 104 92  84 83 72  65 66 61
+51 52 50  43 45 43  35 37 36  30 32 31  25 27 26  20 23 23
+17 20 20  15 18 18  13 16 16  12 15 15  12 15 15  11 14 14
+11 14 14  11 14 14  11 13 13  11 13 13  11 13 13  11 13 13
+11 14 14  11 14 14  11 14 14  11 14 14  11 14 14  11 14 14
+12 15 15  12 15 15  12 15 15  12 15 15  13 16 16  13 16 16
+13 16 16  13 16 16  13 17 17  13 17 17  14 17 17  14 17 17
+14 18 18  14 18 18  14 18 18  16 19 19  37 39 37  41 42 42
+41 42 42  41 42 42  38 39 37  32 34 33  27 29 28  23 24 24
+21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  11 11 11  137 133 100
+197 193 154  251 251 187  239 239 170  184 179 149  31 33 31  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  12 12 12
+110 109 94  110 109 94  105 104 92  90 89 73  72 73 67  58 59 55
+46 47 45  37 39 37  31 33 31  26 28 27  20 24 24  17 21 21
+15 18 18  13 16 16  12 15 15  12 14 14  11 13 13  11 13 13
+10 13 13  10 13 13  10 13 13  10 13 13  10 13 13  10 13 13
+10 13 13  10 13 13  11 13 13  11 13 13  11 14 14  11 14 14
+11 14 14  11 14 14  12 14 14  12 15 15  12 15 15  12 15 15
+13 16 16  13 16 16  13 16 16  13 16 16  13 17 17  13 17 17
+14 17 17  14 17 17  14 18 18  23 27 26  41 42 42  41 42 42
+43 45 43  41 42 42  39 40 39  33 36 34  27 29 28  23 24 24
+21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  27 29 28  168 163 120  210 208 158
+251 251 187  251 251 187  210 208 158  137 133 100  1 1 1  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  60 60 56
+110 109 94  105 104 92  105 104 92  84 83 72  65 66 61  51 52 50
+40 43 41  33 36 34  27 30 29  23 25 24  18 22 22  16 19 19
+14 17 17  12 15 15  11 14 14  11 14 14  10 13 13  10 13 13
+10 13 13  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
+10 12 12  10 12 12  10 13 13  10 13 13  10 13 13  11 13 13
+11 13 13  11 14 14  11 14 14  11 14 14  11 14 14  12 15 15
+12 15 15  12 15 15  12 15 15  13 16 16  13 16 16  13 16 16
+13 17 17  13 17 17  14 17 17  32 34 33  43 45 43  43 45 43
+43 45 43  43 45 43  39 40 39  33 36 34  27 29 28  23 24 24
+21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  1 1 1  68 70 65  184 179 149  210 208 158  251 251 187
+251 251 187  214 212 158  184 179 149  37 39 37  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  6 7 7  105 104 92
+105 104 92  105 104 92  99 98 80  72 73 67  58 59 55  46 47 45
+35 37 36  30 32 31  25 27 26  20 23 23  16 19 19  14 17 17
+12 15 15  12 14 14  11 13 13  10 13 13  10 12 12  10 12 12
+10 12 12  10 12 12  9 12 12  9 12 12  9 12 12  9 12 12
+10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 13 13
+10 13 13  10 13 13  11 13 13  11 13 13  11 14 14  11 14 14
+11 14 14  12 15 15  12 15 15  12 15 15  12 15 15  13 16 16
+13 16 16  13 16 16  17 20 20  41 42 42  46 47 45  46 47 45
+46 47 45  43 45 43  40 41 39  33 36 34  27 29 28  23 24 24
+20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  4 5 5  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+15 15 15  110 109 94  197 193 154  214 212 158  251 251 187  251 251 187
+239 239 170  184 179 149  84 83 72  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  47 48 46  105 104 92
+105 104 92  99 98 80  84 83 72  68 70 65  51 52 50  40 43 41
+32 34 33  27 29 28  22 24 23  17 21 21  15 18 18  13 16 16
+12 15 15  11 13 13  10 13 13  10 12 12  9 12 12  9 12 12
+9 12 12  9 12 12  9 11 11  9 11 11  9 11 11  9 11 11
+9 12 12  9 12 12  9 12 12  9 12 12  10 12 12  10 12 12
+10 12 12  10 12 12  10 13 13  10 13 13  10 13 13  11 13 13
+11 14 14  11 14 14  11 14 14  12 14 14  12 15 15  12 15 15
+12 15 15  13 16 16  28 31 30  43 45 43  47 48 46  47 48 46
+47 48 46  43 45 43  40 41 39  33 36 34  27 29 28  22 24 23
+20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  3 4 4  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  60 60 56
+177 172 135  197 193 154  251 251 187  251 251 187  251 251 187  251 251 187
+184 179 149  110 109 94  3 4 4  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  1 1 1  99 98 80  105 104 92
+99 98 80  87 86 72  84 83 72  63 64 60  46 47 45  35 37 36
+30 32 31  25 27 26  18 22 22  16 19 19  14 17 17  12 15 15
+11 14 14  10 13 13  9 12 12  9 12 12  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 11 11  9 12 12  9 12 12
+9 12 12  10 12 12  10 12 12  10 12 12  10 13 13  10 13 13
+10 13 13  11 13 13  11 14 14  11 14 14  11 14 14  12 15 15
+12 15 15  14 17 17  41 42 42  47 48 46  49 51 48  51 52 50
+47 48 46  43 45 43  40 41 39  33 36 34  27 29 28  22 24 23
+19 20 19  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  2 2 2  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  23 24 24  137 133 100  184 179 149
+210 208 158  251 251 187  251 251 187  251 251 187  251 251 187  184 179 149
+110 109 94  13 13 13  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  30 32 31  105 104 92  99 98 80
+84 83 72  84 83 72  72 73 67  55 57 54  41 42 42  32 34 33
+27 29 28  20 24 24  17 20 20  14 17 17  13 16 16  12 14 14
+10 13 13  10 12 12  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 12 12  9 12 12  10 12 12  10 12 12  10 12 12
+10 13 13  10 13 13  10 13 13  11 13 13  11 14 14  11 14 14
+11 14 14  27 29 28  55 56 53  72 73 67  51 52 50  51 52 50
+49 51 48  43 45 43  39 40 39  32 34 33  26 28 27  21 22 21
+19 20 19  16 16 16  18 19 17  13 13 13  12 12 12  12 12 12
+12 12 12  12 12 12  1 1 1  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  8 8 7  84 83 72  184 179 149  197 193 154  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  184 179 149  145 141 105
+19 20 19  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  14 14 13  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  72 73 67  105 104 92  84 83 72
+72 73 67  84 83 72  68 70 65  49 51 48  39 40 39  30 32 31
+25 27 26  18 22 22  15 18 18  13 16 16  12 15 15  11 13 13
+10 12 12  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 12 12  9 12 12  9 12 12
+10 12 12  10 12 12  10 12 12  10 13 13  10 13 13  11 13 13
+13 16 16  41 42 42  99 98 80  158 153 112  65 66 61  51 52 50
+49 51 48  43 45 43  39 40 39  31 33 31  25 27 26  21 22 21
+21 22 21  68 70 65  55 56 53  13 13 13  12 12 12  12 12 12
+12 12 12  11 11 11  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 3 3
+63 64 60  158 153 112  184 179 149  210 208 158  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  184 179 149  137 133 100  27 29 28
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+21 22 21  110 109 94  5 6 5  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  13 13 13  105 104 92  90 89 73  72 73 67
+68 70 65  84 83 72  63 64 60  46 47 45  35 37 36  27 29 28
+22 24 23  17 20 20  14 17 17  12 15 15  11 14 14  10 12 12
+10 12 12  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 12 12  9 12 12  10 12 12  10 12 12  10 13 13  10 13 13
+30 32 31  47 48 46  177 172 135  210 208 158  137 133 100  55 56 53
+49 51 48  43 45 43  38 39 37  31 33 31  25 27 26  22 24 23
+110 109 94  184 179 149  63 64 60  13 13 13  12 12 12  12 12 12
+12 12 12  8 9 9  0 0 0  1 1 1  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  21 22 21  105 104 92
+184 179 149  210 208 158  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  251 251 187  184 179 149  145 141 105  23 24 24  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+68 70 65  184 179 149  105 104 92  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  51 52 50  99 98 80  84 83 72  63 64 60
+68 70 65  72 73 67  55 57 54  41 42 42  32 34 33  25 27 26
+20 23 23  16 19 19  13 16 16  12 14 14  10 13 13  10 12 12
+9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 12 12  9 12 12  10 12 12  17 20 20
+46 47 45  72 73 67  210 208 158  251 251 187  210 208 158  63 64 60
+49 51 48  43 45 43  37 39 37  30 32 31  24 26 24  105 104 92
+210 208 158  197 193 154  47 48 46  13 13 13  12 12 12  12 12 12
+12 12 12  6 7 7  33 36 34  48 49 45  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  8 8 7  23 24 24  55 56 53  110 109 94
+210 208 158  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  184 179 149  110 109 94  20 20 20  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+110 109 94  251 251 187  210 208 158  47 48 46  0 0 0  0 0 0
+0 0 0  1 1 1  90 89 73  90 89 73  72 73 67  55 56 53
+72 73 67  68 70 65  51 52 50  37 39 37  28 31 30  23 25 24
+17 21 21  15 18 18  12 15 15  11 14 14  10 13 13  9 12 12
+9 11 11  9 11 11  9 11 11  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  9 12 12  13 16 16  41 42 42
+49 51 48  110 109 94  251 251 187  251 251 187  251 251 187  105 104 92
+49 51 48  43 45 43  35 37 36  30 31 28  47 48 46  197 193 154
+251 251 187  197 193 154  31 33 31  12 12 12  12 12 12  12 12 12
+12 12 12  51 52 50  184 179 149  72 73 67  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 2 2
+11 11 11  21 22 21  30 32 31  40 41 39  60 60 56  145 141 105
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
+184 179 149  110 109 94  13 13 13  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  4 5 4  61 61 53  48 49 45  3 4 3
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+156 151 111  251 251 187  251 251 187  184 179 149  11 11 11  0 0 0
+0 0 0  26 28 27  99 98 80  84 83 72  60 60 56  43 45 43
+72 73 67  65 66 61  49 51 48  35 37 36  27 29 28  20 24 24
+17 20 20  14 17 17  12 15 15  11 13 13  10 12 12  9 11 11
+9 11 11  9 11 11  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  9 11 11  9 11 11
+9 11 11  9 11 11  9 11 11  11 13 13  37 39 37  47 48 46
+51 52 50  184 179 149  251 251 187  251 251 187  251 251 187  145 141 105
+47 48 46  41 42 42  35 37 36  27 29 28  137 133 100  251 251 187
+251 251 187  197 193 154  19 20 19  12 12 12  12 12 12  12 12 12
+27 29 28  184 179 149  214 212 158  63 64 60  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  1 1 1  6 7 7  16 16 16  24 26 24
+30 32 31  38 39 37  47 48 46  55 57 54  68 70 65  110 109 94
+197 193 154  251 251 187  251 251 187  251 251 187  210 208 158  184 179 149
+105 104 92  8 8 7  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  65 66 61  184 179 149  156 151 111
+30 32 31  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+168 163 120  251 251 187  251 251 187  251 251 187  110 109 94  0 0 0
+0 0 0  60 60 56  84 83 72  68 70 65  51 52 50  38 39 37
+84 83 72  63 64 60  43 45 43  33 36 34  25 27 26  20 23 22
+15 18 18  13 16 16  12 14 14  10 13 13  9 12 12  9 11 11
+9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+9 11 11  9 11 11  10 12 12  33 36 34  46 47 45  51 52 50
+72 73 67  210 208 158  251 251 187  251 251 187  251 251 187  177 172 135
+47 48 46  41 42 42  35 37 36  37 39 37  184 179 149  251 251 187
+251 251 187  197 193 154  13 13 13  12 12 12  12 12 12  12 12 12
+110 109 94  251 251 187  251 251 187  37 39 37  0 0 0  0 0 0
+0 0 0  21 22 20  2 2 1  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+4 5 5  12 12 12  21 22 21  25 27 26  30 32 31  38 39 37
+46 47 45  55 56 53  60 60 56  65 66 61  68 70 65  105 104 92
+110 109 94  197 193 154  210 208 158  197 193 154  184 179 149  84 83 72
+2 2 2  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  13 13 13  184 179 149  251 251 187
+197 193 154  43 44 41  0 0 0  0 0 0  0 0 0  0 0 0
+145 141 105  251 251 187  251 251 187  251 251 187  214 212 158  43 45 43
+2 2 2  84 83 72  72 73 67  58 59 55  41 42 42  38 39 37
+72 73 67  58 59 55  41 42 42  31 33 31  25 27 26  18 22 22
+14 17 17  12 15 15  12 14 14  10 12 12  9 12 12  9 11 11
+9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  9 12 12  31 33 31  43 45 43  49 51 48  55 56 53
+110 109 94  251 251 187  251 251 187  251 251 187  251 251 187  168 163 120
+47 48 46  41 42 42  33 36 34  63 64 60  197 193 154  251 251 187
+251 251 187  184 179 149  13 13 13  12 12 12  12 12 12  16 16 16
+197 193 154  251 251 187  239 239 170  20 20 20  0 0 0  2 2 1
+108 107 93  110 109 94  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  1 1 1  4 5 5  11 11 11  18 19 18
+22 24 23  26 28 27  32 34 33  39 40 39  46 47 45  51 52 50
+55 57 54  60 60 56  63 64 60  63 64 60  63 64 60  58 59 55
+63 64 60  99 98 80  145 141 105  137 133 100  43 45 43  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  3 4 3  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  110 109 94  251 251 187
+251 251 187  184 179 149  25 27 26  0 0 0  0 0 0  0 0 0
+99 98 80  251 251 187  251 251 187  251 251 187  251 251 187  156 151 111
+25 27 26  84 83 72  65 66 61  47 48 46  32 34 33  39 40 39
+72 73 67  55 57 54  40 41 39  30 32 31  23 25 24  18 22 22
+14 17 17  12 15 15  11 13 13  10 12 12  9 11 11  9 11 11
+9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+9 11 11  28 31 30  41 42 42  47 48 46  55 56 53  58 59 55
+137 133 100  251 251 187  251 251 187  251 251 187  210 208 158  137 133 100
+47 48 46  40 41 39  32 34 33  75 75 61  184 179 149  239 239 170
+251 251 187  177 172 135  13 13 13  12 12 12  12 12 12  43 44 41
+197 193 154  251 251 187  210 208 158  10 10 9  0 0 0  84 83 72
+251 251 187  84 83 72  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
+6 7 7  11 11 11  17 17 17  20 20 20  23 24 24  27 29 28
+32 34 33  38 39 37  43 45 43  47 48 46  51 52 50  55 56 53
+58 59 55  58 59 55  55 57 54  55 56 53  47 48 46  41 42 42
+35 37 36  31 33 31  47 48 46  14 14 13  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  66 65 55  99 98 80  20 20 20
+0 0 0  0 0 0  0 0 0  0 0 0  43 45 43  214 212 158
+251 251 187  251 251 187  145 141 105  3 3 3  0 0 0  0 0 0
+48 49 45  184 179 149  239 239 170  251 251 187  239 239 170  177 172 135
+84 83 72  72 73 67  55 56 53  39 40 39  26 28 27  39 40 39
+68 70 65  51 52 50  39 40 39  28 31 30  22 24 23  17 20 20
+14 17 17  12 14 14  10 13 13  9 11 11  9 11 11  9 11 11
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+27 29 28  40 41 39  46 47 45  51 52 50  55 57 54  63 64 60
+131 127 93  197 193 154  210 208 158  197 193 154  168 163 120  96 95 69
+47 48 46  40 41 39  32 34 33  71 71 57  145 141 105  184 179 149
+184 179 149  131 127 93  13 13 13  12 12 12  12 12 12  48 49 45
+168 163 120  184 179 149  156 151 111  6 7 7  14 14 13  177 172 135
+239 239 170  40 41 39  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  3 3 3  6 7 7  11 11 11  16 16 16
+18 19 18  21 22 21  23 24 24  27 29 28  32 34 33  37 39 37
+41 42 42  43 45 43  47 48 46  51 52 50  51 52 50  51 52 50
+51 52 50  49 51 48  46 47 45  40 41 39  32 34 33  25 27 26
+20 20 20  14 14 13  2 2 2  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  33 36 34  197 193 154  184 179 149
+41 42 42  0 0 0  0 0 0  0 0 0  3 3 3  184 179 149
+251 251 187  251 251 187  184 179 149  48 49 45  0 0 0  0 0 0
+16 17 12  121 119 87  177 172 135  194 189 146  188 184 146  145 141 105
+82 81 62  63 64 60  46 47 45  31 33 31  21 22 21  35 37 36
+68 70 65  51 52 50  37 39 37  27 30 29  22 24 23  17 20 20
+13 16 16  12 14 14  10 13 13  9 11 11  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  25 27 26
+38 39 37  43 45 43  51 52 50  55 56 53  60 60 56  63 64 60
+92 91 72  158 153 112  176 171 126  171 165 117  149 143 98  82 81 62
+44 46 43  38 39 37  30 32 31  71 71 57  131 127 93  160 154 106
+149 143 98  82 81 62  13 13 13  12 12 12  12 12 12  46 47 43
+121 119 87  134 131 96  96 95 69  7 7 6  38 39 37  131 127 93
+145 141 105  12 13 12  0 0 0  1 1 1  3 3 3  6 7 7
+10 10 9  12 12 12  14 14 13  16 16 16  18 19 18  21 22 21
+22 24 23  26 28 27  30 31 28  33 36 34  37 39 37  40 41 39
+41 42 42  43 45 43  46 47 45  46 47 45  46 47 45  43 45 43
+41 42 42  37 39 37  31 33 31  26 28 27  21 22 21  16 16 16
+6 7 7  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  177 172 135  251 251 187
+197 193 154  27 29 28  0 0 0  0 0 0  0 0 0  110 109 94
+239 239 170  239 239 170  184 179 149  87 86 72  2 2 1  0 0 0
+1 1 1  82 81 62  142 137 94  165 161 109  165 161 109  131 127 93
+75 75 61  55 56 53  37 39 37  25 27 26  19 20 19  32 34 33
+65 66 61  49 51 48  35 37 36  27 29 28  20 23 23  16 19 19
+13 16 16  13 13 13  10 12 12  9 11 11  8 10 10  8 10 10
+8 9 9  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  22 24 23  35 37 36
+41 42 42  47 48 46  55 56 53  58 59 55  63 64 60  65 66 61
+71 71 57  131 127 93  160 154 106  160 154 106  142 137 94  82 81 62
+46 47 43  40 41 39  33 36 34  66 65 55  125 122 87  149 143 98
+142 137 94  82 81 62  17 17 17  18 19 17  14 14 13  46 47 43
+118 116 76  125 122 87  96 95 69  16 17 12  71 71 57  103 101 77
+82 81 62  11 11 11  11 11 11  13 13 13  14 14 13  14 14 13
+15 15 15  16 16 16  17 17 17  19 20 19  21 22 21  23 24 24
+26 28 27  27 29 28  31 33 31  33 36 34  35 37 36  38 39 37
+39 40 39  39 40 39  38 39 37  37 39 37  35 37 36  31 33 31
+27 29 28  24 26 24  21 22 21  17 17 17  12 12 12  2 2 2
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  68 70 65  251 251 187
+251 251 187  156 151 111  2 2 1  0 0 0  0 0 0  43 44 41
+177 172 135  184 179 149  158 153 112  103 101 77  19 20 18  0 0 0
+0 0 0  46 47 43  131 127 93  160 154 106  160 154 106  131 127 93
+71 71 57  43 45 43  30 32 31  21 22 21  16 16 16  26 28 27
+63 64 60  47 48 46  35 37 36  26 28 27  20 23 23  16 19 19
+13 16 16  13 13 13  10 12 12  9 11 11  8 10 10  8 10 10
+7 9 9  7 9 9  8 9 9  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  20 20 20  33 36 34  40 41 39
+46 47 45  51 52 50  55 57 54  60 60 56  63 64 60  65 66 61
+66 65 55  118 116 76  151 147 98  165 161 109  151 147 98  121 119 87
+96 95 69  96 95 69  96 95 69  103 101 77  142 137 94  151 147 98
+142 137 94  103 101 77  82 81 62  82 81 62  82 81 62  96 95 69
+131 127 93  142 137 94  103 101 77  46 47 43  96 95 69  118 116 76
+71 71 57  14 14 13  14 14 13  15 15 15  15 15 15  16 16 16
+16 16 16  17 17 17  18 19 18  20 20 20  21 22 21  23 24 24
+25 27 26  27 29 28  30 31 28  30 32 31  31 33 31  31 33 31
+31 33 31  31 33 31  30 31 28  27 29 28  25 27 26  22 24 23
+20 20 20  16 16 16  13 13 13  6 7 7  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+58 59 55  68 70 65  8 8 7  0 0 0  10 10 9  210 208 158
+251 251 187  184 179 149  38 39 37  0 0 0  0 0 0  8 8 7
+103 101 77  149 143 98  149 143 98  118 116 76  40 41 39  25 27 25
+53 55 47  82 81 62  144 139 99  165 161 109  165 161 109  142 137 94
+71 71 57  35 37 36  24 26 24  18 19 18  15 15 15  22 24 23
+63 64 60  46 47 45  33 36 34  26 28 27  20 23 22  17 18 17
+12 15 15  11 13 13  10 12 12  9 11 11  8 10 10  8 10 10
+7 9 9  7 9 9  7 9 9  7 9 9  8 9 9  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  16 16 16  30 31 28  35 37 36  41 42 42
+47 48 46  55 56 53  58 59 55  63 64 60  65 66 61  65 66 61
+61 61 53  103 101 77  151 147 98  171 165 117  171 165 117  168 163 120
+158 153 112  158 153 112  155 149 109  151 147 98  151 147 98  160 154 106
+151 147 98  149 143 98  142 137 94  149 143 98  149 143 98  149 143 98
+155 149 109  151 147 98  131 127 93  103 101 77  125 122 87  118 116 76
+71 71 57  16 16 16  16 16 16  16 16 16  17 17 17  17 17 17
+17 17 17  17 17 17  18 19 18  19 20 19  20 20 20  21 22 21
+23 24 24  24 26 24  25 27 26  26 28 27  26 28 27  26 28 27
+25 27 26  24 26 24  22 24 23  21 22 21  19 20 19  16 16 16
+14 14 13  8 8 7  1 1 1  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+20 20 20  184 179 149  168 163 120  21 22 21  0 0 0  105 104 92
+177 172 135  145 141 105  71 71 57  0 0 0  0 0 0  0 0 0
+66 65 55  131 127 93  151 147 98  142 137 94  118 116 76  121 119 87
+145 141 105  158 153 112  176 171 126  178 174 128  176 171 126  149 145 103
+96 95 69  31 33 31  21 22 21  16 16 16  14 14 13  18 19 18
+60 60 56  46 47 45  33 36 34  25 27 26  21 22 21  15 18 18
+12 15 15  11 13 13  9 11 11  8 10 10  8 10 10  8 9 9
+7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  8 9 9
+8 9 9  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  10 12 12  26 28 27  31 33 31  38 39 37  43 45 43
+51 52 50  55 56 53  60 60 56  63 64 60  65 66 61  68 70 65
+63 64 60  96 95 69  158 153 112  178 174 128  188 184 146  194 189 146
+194 189 146  188 184 146  184 181 136  176 171 126  171 165 117  173 167 111
+173 167 111  165 161 109  171 165 117  174 170 121  176 171 126  178 174 128
+178 174 128  174 170 121  160 154 106  149 143 98  149 143 98  125 122 87
+71 71 57  16 16 16  16 16 16  17 17 17  17 17 17  17 17 17
+17 17 17  17 17 17  17 17 17  18 19 18  19 20 19  20 20 20
+21 22 21  21 22 21  21 22 21  22 24 23  21 22 21  21 22 21
+21 22 21  19 20 19  18 19 18  16 16 16  14 14 13  11 11 11
+3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  105 104 92  197 193 154  110 109 94  9 9 8  36 38 35
+121 119 87  131 127 93  96 95 69  18 19 17  30 31 28  66 65 55
+96 95 69  142 137 94  160 154 106  160 154 106  160 154 106  168 163 120
+184 181 136  194 191 148  197 193 154  197 193 154  194 189 146  168 163 120
+125 122 87  46 47 43  18 19 18  15 15 15  13 13 13  14 14 13
+55 57 54  43 45 43  32 34 33  25 27 26  18 22 22  17 17 17
+12 14 14  10 12 12  9 11 11  8 10 10  8 9 9  7 9 9
+6 8 8  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
+7 9 9  8 9 9  8 9 9  8 10 10  8 10 10  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  32 34 33  41 42 42  35 37 36  39 40 39  37 39 37
+35 37 36  55 57 54  60 60 56  63 64 60  65 66 61  65 66 61
+61 63 57  115 113 82  168 163 120  194 191 148  204 201 155  210 208 158
+210 208 158  210 208 158  197 193 154  194 189 146  186 182 128  176 171 126
+174 170 121  176 171 126  186 182 128  190 186 136  194 191 148  197 193 154
+197 193 154  188 184 146  181 176 137  174 170 121  165 161 109  142 137 94
+82 81 62  24 26 24  16 16 16  16 16 16  16 16 16  16 16 16
+17 17 17  17 17 17  17 17 17  17 17 17  18 19 18  19 20 19
+19 20 19  19 20 19  20 20 20  19 20 19  19 20 19  18 19 18
+17 17 17  15 15 15  13 13 13  12 12 12  6 7 7  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  17 18 17  137 133 100  115 113 82  53 55 47  19 20 18
+103 101 77  144 139 99  137 133 100  115 113 82  137 133 100  156 151 111
+158 153 112  164 159 111  171 165 117  174 170 121  178 174 128  194 189 146
+204 201 155  214 212 158  214 212 158  214 212 158  210 208 158  188 184 146
+158 153 112  87 86 72  17 17 17  13 13 13  13 13 13  15 15 15
+55 56 53  43 45 43  32 34 33  24 26 24  17 20 20  16 16 16
+12 14 14  10 12 12  8 10 10  8 10 10  7 9 9  6 8 8
+6 8 8  6 8 8  6 8 8  7 9 9  7 9 9  7 9 9
+7 9 9  7 9 9  7 9 9  7 9 9  8 9 9  8 10 10
+8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
+8 10 10  110 109 94  84 83 72  49 51 48  26 28 27  8 10 10
+8 9 9  51 52 50  58 59 55  63 64 60  63 64 60  63 64 60
+66 65 55  134 131 96  181 176 137  210 208 158  214 212 158  239 239 170
+239 239 170  224 223 159  210 208 158  204 201 155  194 189 146  186 182 128
+186 182 128  184 181 136  194 189 146  204 201 155  210 208 158  210 208 158
+210 208 158  210 208 158  197 193 154  190 186 136  176 171 126  155 149 109
+118 116 76  36 38 35  15 15 15  16 16 16  16 16 16  16 16 16
+16 16 16  16 16 16  16 16 16  16 16 16  16 16 16  17 17 17
+17 17 17  17 17 17  17 17 17  16 16 16  16 16 16  15 15 15
+13 13 13  12 12 12  8 8 7  2 2 2  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  53 55 47  103 101 77  96 95 69  53 55 47
+103 101 77  158 153 112  177 172 135  184 179 149  188 184 146  197 193 154
+194 189 146  190 186 136  184 181 136  184 181 136  194 189 146  210 208 158
+214 212 158  239 239 170  251 251 187  251 251 187  224 223 159  204 201 155
+177 172 135  121 119 87  30 31 28  13 13 13  12 12 12  39 40 39
+60 60 56  43 45 43  32 34 33  23 25 24  18 19 18  13 16 16
+13 13 13  9 11 11  8 10 10  8 9 9  6 8 8  6 8 8
+6 8 8  6 8 8  6 8 8  6 8 8  6 8 8  7 9 9
+7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
+7 9 9  8 9 9  8 9 9  8 10 10  8 10 10  8 10 10
+14 17 17  197 193 154  158 153 112  55 57 54  7 9 9  7 9 9
+8 10 10  51 52 50  58 59 55  60 60 56  63 64 60  63 64 60
+71 71 57  155 149 109  194 191 148  214 212 158  251 251 187  251 251 187
+251 251 187  251 251 187  239 239 170  210 208 158  197 193 154  190 186 136
+190 186 136  194 189 146  204 201 155  210 208 158  224 223 159  239 239 170
+239 239 170  224 223 159  210 208 158  204 201 155  190 186 136  164 159 111
+125 122 87  40 41 39  15 15 15  15 15 15  15 15 15  15 15 15
+16 16 16  16 16 16  16 16 16  16 16 16  16 16 16  16 16 16
+16 16 16  16 16 16  15 15 15  14 14 13  13 13 13  12 12 12
+8 9 9  3 3 3  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  21 22 20  96 95 69  125 122 87  121 119 87
+144 139 99  177 172 135  197 193 154  210 208 158  214 212 158  214 212 158
+210 208 158  204 201 155  194 191 148  194 189 146  204 201 155  214 212 158
+239 239 170  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
+188 184 146  145 141 105  53 55 47  12 12 12  15 15 15  63 64 60
+63 64 60  41 42 42  31 33 31  23 24 24  17 18 17  12 15 15
+11 13 13  9 11 11  8 9 9  7 9 9  6 8 8  6 8 8
+6 7 7  6 7 7  6 8 8  6 8 8  6 8 8  6 8 8
+6 8 8  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
+7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  8 8 7
+43 45 43  251 251 187  156 151 111  8 10 10  7 9 9  7 9 9
+21 22 21  51 52 50  55 56 53  55 57 54  58 59 55  58 59 55
+75 75 61  158 153 112  197 193 154  224 223 159  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  214 212 158  204 201 155  194 189 146
+190 186 136  197 193 154  210 208 158  224 223 159  251 251 187  251 251 187
+251 251 187  251 251 187  239 239 170  210 208 158  197 193 154  176 171 126
+125 122 87  36 38 35  14 14 13  14 14 13  15 15 15  15 15 15
+15 15 15  15 15 15  15 15 15  15 15 15  15 15 15  15 15 15
+15 15 15  14 14 13  13 13 13  12 12 12  10 10 9  3 4 4
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  7 7 5  71 71 57  131 127 93  158 153 112
+177 172 135  197 193 154  214 212 158  239 239 170  251 251 187  251 251 187
+238 237 168  210 208 158  204 201 155  197 193 154  204 201 155  214 212 158
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
+197 193 154  156 151 111  66 65 55  12 12 12  37 39 37  58 59 55
+58 59 55  41 42 42  31 33 31  22 24 23  17 17 17  12 14 14
+10 12 12  8 10 10  6 8 8  6 8 8  6 7 7  6 7 7
+6 7 7  5 7 7  6 7 7  6 7 7  6 8 8  6 8 8
+6 8 8  6 8 8  6 8 8  7 9 9  7 9 9  7 9 9
+7 9 9  6 8 8  6 8 8  6 8 8  6 8 8  6 8 8
+61 63 57  197 193 154  16 19 19  6 8 8  6 8 8  8 9 9
+41 42 42  47 48 46  51 52 50  51 52 50  55 56 53  55 56 53
+71 71 57  158 153 112  197 193 154  224 223 159  251 251 187  251 251 187
+251 251 187  251 251 187  239 239 170  214 212 158  204 201 155  194 189 146
+190 186 136  197 193 154  210 208 158  239 239 170  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  224 223 159  204 201 155  177 172 135
+121 119 87  30 31 28  13 13 13  14 14 13  14 14 13  14 14 13
+14 14 13  14 14 13  15 15 15  15 15 15  14 14 13  13 13 13
+12 12 12  12 12 12  10 10 9  4 5 5  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  48 49 45  131 127 93  174 170 121
+194 189 146  210 208 158  239 239 170  251 251 187  251 251 187  251 251 187
+251 251 187  214 212 158  204 201 155  197 193 154  204 201 155  210 208 158
+239 239 170  251 251 187  251 251 187  251 251 187  239 239 170  214 212 158
+194 191 148  156 151 111  71 71 57  19 20 19  51 52 50  51 52 50
+51 52 50  41 42 42  30 32 31  21 22 21  17 17 17  13 13 13
+9 11 11  8 9 9  6 8 8  6 7 7  6 7 7  5 7 7
+5 6 5  5 6 5  5 7 7  5 7 7  6 7 7  6 7 7
+6 8 8  6 8 8  6 8 8  6 7 7  6 7 7  6 7 7
+6 7 7  6 8 8  6 8 8  6 8 8  6 8 8  6 8 8
+55 56 53  43 45 43  6 8 8  6 8 8  6 8 8  47 48 46
+60 60 56  47 48 46  46 47 45  47 48 46  38 39 37  10 12 12
+66 65 55  145 141 105  197 193 154  214 212 158  251 251 187  251 251 187
+251 251 187  251 251 187  224 223 159  210 208 158  194 191 148  184 181 136
+184 181 136  194 189 146  204 201 155  224 223 159  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  181 176 137
+115 113 82  21 22 20  13 13 13  13 13 13  13 13 13  13 13 13
+14 14 13  13 13 13  13 13 13  13 13 13  12 12 12  11 11 11
+10 10 9  6 7 7  1 1 1  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  2 2 1  66 65 55  144 139 99  178 174 128
+204 201 155  214 212 158  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  214 212 158  204 201 155  194 191 148  197 193 154  204 201 155
+214 212 158  239 239 170  239 239 170  239 239 170  214 212 158  210 208 158
+184 181 136  149 145 103  66 65 55  41 42 42  47 48 46  46 47 45
+43 45 43  39 40 39  28 31 30  21 22 21  16 16 16  10 12 12
+8 10 10  6 8 8  6 7 7  6 7 7  5 6 5  5 6 5
+5 6 5  5 6 5  5 6 5  5 6 5  5 7 7  5 7 7
+6 7 7  6 7 7  6 7 7  5 7 7  5 7 7  5 7 7
+5 7 7  6 7 7  6 7 7  6 7 7  6 7 7  6 8 8
+6 8 8  6 8 8  6 7 7  6 7 7  46 47 45  156 151 111
+105 104 92  58 59 55  43 45 43  32 34 33  6 8 8  6 8 8
+49 51 48  125 122 87  181 176 137  204 201 155  214 212 158  239 239 170
+239 239 170  214 212 158  210 208 158  197 193 154  181 176 137  176 171 126
+176 171 126  184 181 136  197 193 154  210 208 158  239 239 170  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  177 172 135
+99 98 80  13 13 13  12 12 12  12 12 12  13 13 13  12 12 12
+12 12 12  12 12 12  11 11 11  11 11 11  8 9 9  4 5 5
+1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  1 1 0  61 61 53  142 137 94  181 176 137
+204 201 155  224 223 159  251 251 187  251 251 187  251 251 187  251 251 187
+251 251 187  214 212 158  197 193 154  190 186 136  184 181 136  188 184 146
+197 193 154  204 201 155  210 208 158  210 208 158  204 201 155  194 189 146
+176 171 126  134 131 96  66 65 55  43 45 43  41 42 42  39 40 39
+35 37 36  33 36 34  27 29 28  20 20 20  15 15 15  9 11 11
+8 9 9  6 7 7  5 6 5  5 6 5  4 5 5  4 5 5
+4 5 5  4 5 5  4 5 5  4 5 5  5 6 5  4 5 5
+4 5 5  5 6 5  4 5 5  5 6 5  5 6 5  5 6 5
+5 7 7  5 7 7  5 7 7  5 7 7  5 7 7  5 7 7
+6 7 7  6 7 7  6 7 7  28 31 30  184 179 149  184 179 149
+145 141 105  84 83 72  27 29 28  5 7 7  5 6 5  16 16 16
+43 44 41  96 95 69  158 153 112  188 184 146  204 201 155  210 208 158
+204 201 155  197 193 154  184 179 149  177 172 135  168 163 120  164 159 111
+164 159 111  174 170 121  184 181 136  197 193 154  214 212 158  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  177 172 135
+71 71 57  11 11 11  12 12 12  11 11 11  11 11 11  11 11 11
+10 10 9  10 10 9  8 8 7  3 4 4  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  31 33 31  121 119 87  176 171 126
+197 193 154  214 212 158  251 251 187  251 251 187  251 251 187  251 251 187
+239 239 170  210 208 158  194 189 146  178 174 128  174 170 121  176 171 126
+177 172 135  181 176 137  184 179 149  184 179 149  181 176 137  178 174 128
+158 153 112  121 119 87  53 55 47  37 39 37  33 36 34  30 32 31
+27 29 28  25 27 26  24 26 24  19 20 19  13 13 13  8 10 10
+6 8 8  6 7 7  5 6 5  4 5 5  4 5 5  4 5 5
+4 5 5  4 5 5  4 5 5  3 4 4  3 4 4  4 5 5
+4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
+5 6 5  5 6 5  5 6 5  5 6 5  5 6 5  5 6 5
+5 6 5  5 6 5  12 14 14  145 141 105  184 179 149  177 172 135
+90 89 73  21 22 21  5 6 5  5 6 5  4 5 5  37 39 37
+38 39 37  61 61 53  134 131 96  168 163 120  184 181 136  188 184 146
+184 179 149  177 172 135  168 163 120  164 159 111  155 149 109  151 147 98
+151 147 98  164 159 111  176 171 126  184 179 149  210 208 158  239 239 170
+251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  158 153 112
+46 47 43  10 10 9  10 10 9  10 10 9  8 9 9  8 9 9
+6 7 7  3 3 3  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  13 12 7  82 81 62  158 153 112
+188 184 146  210 208 158  239 239 170  251 251 187  251 251 187  251 251 187
+224 223 159  204 201 155  184 181 136  171 165 117  164 159 111  160 154 106
+158 153 112  164 159 111  168 163 120  168 163 120  168 163 120  164 159 111
+142 137 94  96 95 69  43 44 41  27 29 28  26 28 27  23 24 24
+21 22 21  18 19 18  17 17 17  18 19 18  13 13 13  8 8 7
+6 7 7  5 6 5  4 5 5  3 4 4  3 4 4  3 4 4
+3 4 4  3 4 4  3 3 3  3 3 3  3 4 4  3 4 4
+3 4 4  3 4 4  4 5 5  4 5 5  4 5 5  4 5 5
+4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
+4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
+4 5 5  4 5 5  4 5 5  4 5 5  31 33 31  65 66 61
+37 39 37  38 39 37  96 95 69  144 139 99  168 163 120  174 170 121
+168 163 120  164 159 111  155 149 109  149 145 103  149 143 98  142 137 94
+149 143 98  151 147 98  164 159 111  177 172 135  197 193 154  210 208 158
+251 251 187  251 251 187  251 251 187  239 239 170  197 193 154  137 133 100
+24 26 24  8 9 9  8 9 9  8 8 7  6 7 7  2 2 2
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  46 47 43  125 122 87
+176 171 126  197 193 154  210 208 158  239 239 170  251 251 187  239 239 170
+214 212 158  197 193 154  181 176 137  164 159 111  151 147 98  149 143 98
+149 143 98  149 143 98  149 145 103  155 149 109  160 154 106  149 143 98
+118 116 76  82 81 62  30 31 28  21 22 21  19 20 19  17 17 17
+14 14 13  12 12 12  10 10 9  12 12 12  10 12 12  6 8 8
+4 5 5  3 4 4  3 4 4  3 4 4  3 3 3  3 3 3
+3 3 3  3 3 3  3 3 3  3 3 3  2 3 3  2 3 3
+3 4 4  3 4 4  3 4 4  3 4 4  3 4 4  4 5 5
+4 5 5  3 4 4  3 4 4  3 4 4  3 4 4  3 4 4
+4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
+4 5 5  3 4 4  3 4 4  23 24 24  110 109 94  72 73 67
+39 40 39  22 24 23  46 47 43  103 101 77  142 137 94  155 149 109
+160 154 106  155 149 109  149 143 98  142 137 94  142 137 94  142 137 94
+142 137 94  149 143 98  155 149 109  176 171 126  184 179 149  210 208 158
+239 239 170  251 251 187  251 251 187  214 212 158  184 179 149  105 104 92
+10 10 9  6 7 7  3 4 4  1 1 1  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  12 12 9  82 81 62
+149 145 103  181 176 137  197 193 154  210 208 158  214 212 158  214 212 158
+210 208 158  197 193 154  177 172 135  158 153 112  149 143 98  142 137 94
+142 137 94  142 137 94  149 143 98  151 147 98  151 147 98  131 127 93
+103 101 77  71 71 57  22 24 23  15 15 15  13 13 13  11 11 11
+8 9 9  6 7 7  6 7 7  4 5 5  8 9 9  6 7 7
+4 5 5  3 3 3  3 3 3  3 3 3  3 3 3  2 2 2
+2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 3 3
+2 3 3  2 3 3  2 3 3  3 4 4  3 4 4  3 4 4
+3 4 4  3 4 4  3 3 3  3 4 4  3 4 4  3 4 4
+3 4 4  3 4 4  3 4 4  3 4 4  3 4 4  3 4 4
+3 4 4  3 4 4  21 22 21  145 141 105  145 141 105  72 73 67
+17 18 17  3 4 4  21 22 20  66 65 55  118 116 76  142 137 94
+149 143 98  151 147 98  149 143 98  142 137 94  142 137 94  142 137 94
+142 137 94  149 143 98  155 149 109  168 163 120  184 179 149  210 208 158
+239 239 170  251 251 187  251 251 187  210 208 158  177 172 135  71 71 57
+3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  36 38 35
+115 113 82  158 153 112  181 176 137  197 193 154  204 201 155  210 208 158
+204 201 155  188 184 146  177 172 135  164 159 111  149 145 103  142 137 94
+142 137 94  142 137 94  149 143 98  151 147 98  149 143 98  125 122 87
+96 95 69  61 61 53  16 17 12  8 9 9  8 8 7  6 7 7
+4 5 5  3 4 4  3 3 3  3 3 3  3 3 3  5 6 5
+3 4 4  2 3 3  2 2 2  2 2 2  2 2 2  2 2 2
+2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  1 2 2
+2 2 2  2 2 2  2 3 3  2 3 3  2 3 3  2 3 3
+3 3 3  3 3 3  3 3 3  3 3 3  3 3 3  3 3 3
+3 3 3  2 3 3  2 3 3  3 4 4  3 4 4  3 4 4
+3 4 4  3 4 4  3 4 4  8 9 9  8 8 7  3 3 3
+3 3 3  3 3 3  9 9 8  36 38 35  82 81 62  118 116 76
+142 137 94  151 147 98  151 147 98  151 147 98  149 143 98  149 143 98
+149 143 98  151 147 98  160 154 106  176 171 126  188 184 146  210 208 158
+239 239 170  251 251 187  239 239 170  210 208 158  156 151 111  31 33 31
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  7 7 5
+66 65 55  125 122 87  158 153 112  181 176 137  194 189 146  197 193 154
+197 193 154  184 179 149  177 172 135  168 163 120  156 151 111  151 147 98
+151 147 98  151 147 98  151 147 98  161 156 96  149 143 98  118 116 76
+82 81 62  53 55 47  12 12 9  4 5 5  3 4 4  3 3 3
+3 3 3  3 3 3  2 2 2  2 2 2  1 1 1  1 2 2
+3 3 3  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+1 1 1  1 1 1  1 1 1  1 1 1  1 2 2  1 2 2
+1 2 2  1 2 2  1 2 2  2 2 2  2 2 2  2 3 3
+2 3 3  2 3 3  2 3 3  2 3 3  2 2 2  2 2 2
+2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  2 3 3
+2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  3 3 3
+3 3 3  3 3 3  72 73 67  61 61 53  53 55 47  96 95 69
+131 127 93  151 147 98  161 156 96  161 156 96  151 147 98  151 147 98
+161 156 96  160 154 106  164 159 111  177 172 135  197 193 154  210 208 158
+239 239 170  251 251 187  224 223 159  197 193 154  131 127 93  9 9 8
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+24 26 24  82 81 62  131 127 93  164 159 111  178 174 128  188 184 146
+188 184 146  188 184 146  181 176 137  176 171 126  168 163 120  164 159 111
+160 154 106  160 154 106  160 154 106  160 154 106  151 147 98  125 122 87
+82 81 62  61 61 53  12 12 9  3 3 3  3 3 3  2 2 2
+2 2 2  1 1 1  1 1 1  1 1 1  0 0 0  0 0 0
+0 0 0  2 2 2  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 2 2  1 2 2  1 2 2  1 2 2
+1 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  2 3 3
+2 3 3  30 32 31  72 73 67  31 33 31  36 38 35  82 81 62
+118 116 76  149 143 98  161 156 96  161 156 96  161 156 96  160 154 106
+165 161 109  165 161 109  176 171 126  188 184 146  204 201 155  214 212 158
+239 239 170  239 239 170  214 212 158  184 179 149  82 81 62  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+2 2 2  43 44 41  96 95 69  131 127 93  160 154 106  176 171 126
+184 181 136  184 181 136  184 181 136  181 176 137  178 174 128  174 170 121
+171 165 117  173 167 111  173 167 111  173 167 111  160 154 106  131 127 93
+96 95 69  66 65 55  16 17 12  2 2 2  1 1 1  1 1 1
+1 1 1  1 1 1  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  2 2 2
+2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+2 2 2  2 2 2  2 2 2  10 9 6  30 31 28  71 71 57
+118 116 76  149 143 98  165 161 109  165 161 109  165 161 109  173 167 111
+173 167 111  176 171 126  184 181 136  197 193 154  210 208 158  224 223 159
+251 251 187  239 239 170  210 208 158  168 163 120  40 41 39  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  13 12 7  61 61 53  96 95 69  131 127 93  160 154 106
+176 171 126  184 181 136  184 181 136  188 184 146  184 181 136  184 181 136
+184 181 136  186 182 128  186 182 128  178 174 128  174 170 121  149 145 103
+118 116 76  82 81 62  21 22 20  1 1 1  1 1 1  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 2 2
+1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  2 2 2
+2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
+2 2 2  2 2 2  2 2 2  3 3 3  30 31 28  66 65 55
+118 116 76  149 143 98  165 161 109  173 167 111  173 167 111  174 170 121
+186 182 128  190 186 136  197 193 154  210 208 158  224 223 159  251 251 187
+251 251 187  239 239 170  197 193 154  137 133 100  12 12 9  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  30 31 28  71 71 57  103 101 77  134 131 96
+164 159 111  176 171 126  184 181 136  188 184 146  194 189 146  197 193 154
+197 193 154  197 193 154  194 191 148  194 189 146  190 186 136  176 171 126
+145 141 105  103 101 77  40 41 39  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 2 2  1 2 2
+1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  1 2 2
+1 2 2  1 2 2  1 2 2  1 2 2  30 31 28  71 71 57
+118 116 76  160 154 106  173 167 111  178 174 128  186 182 128  190 186 136
+194 191 148  204 201 155  210 208 158  224 223 159  251 251 187  251 251 187
+251 251 187  214 212 158  184 179 149  84 83 72  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  5 5 3  43 44 41  82 81 62  103 101 77
+142 137 94  165 161 109  178 174 128  190 186 136  197 193 154  204 201 155
+210 208 158  210 208 158  210 208 158  210 208 158  210 208 158  197 193 154
+177 172 135  145 141 105  79 78 62  5 4 3  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 2 2  1 2 2  30 31 28  82 81 62
+142 137 94  165 161 109  178 174 128  190 186 136  194 191 148  204 201 155
+210 208 158  214 212 158  239 239 170  251 251 187  251 251 187  251 251 187
+251 251 187  210 208 158  168 163 120  36 38 35  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  16 17 12  53 55 47  82 81 62
+118 116 76  151 147 98  171 165 117  184 181 136  194 191 148  210 208 158
+214 212 158  224 223 159  239 239 170  239 239 170  224 223 159  214 212 158
+197 193 154  176 171 126  115 113 82  24 26 24  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  40 41 39  103 101 77
+151 147 98  176 171 126  190 186 136  197 193 154  210 208 158  214 212 158
+239 239 170  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+239 239 170  197 193 154  110 109 94  3 4 3  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  30 31 28  66 65 55
+96 95 69  125 122 87  160 154 106  178 174 128  194 189 146  204 201 155
+214 212 158  239 239 170  251 251 187  251 251 187  251 251 187  239 239 170
+210 208 158  188 184 146  149 145 103  61 61 53  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  61 61 53  131 127 93
+164 159 111  184 181 136  197 193 154  210 208 158  224 223 159  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
+210 208 158  168 163 120  43 44 41  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  4 3 2  36 38 35
+71 71 57  96 95 69  142 137 94  165 161 109  184 181 136  197 193 154
+210 208 158  239 239 170  251 251 187  251 251 187  251 251 187  251 251 187
+214 212 158  197 193 154  168 163 120  103 101 77  7 7 5  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+1 1 1  0 0 0  0 0 0  0 0 0  82 81 62  142 137 94
+174 170 121  194 189 146  210 208 158  224 223 159  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  224 223 159
+184 179 149  99 98 80  3 3 3  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  7 7 5
+43 44 41  82 81 62  118 116 76  142 137 94  171 165 117  190 186 136
+204 201 155  224 223 159  251 251 187  251 251 187  251 251 187  251 251 187
+214 212 158  197 193 154  174 170 121  125 122 87  30 31 28  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
+1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  3 4 3  82 81 62  149 143 98
+176 171 126  194 191 148  210 208 158  239 239 170  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  251 251 187  239 239 170  204 201 155
+145 141 105  30 31 28  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+10 9 6  46 47 43  82 81 62  118 116 76  149 143 98  174 170 121
+194 189 146  210 208 158  224 223 159  251 251 187  251 251 187  224 223 159
+210 208 158  194 191 148  174 170 121  134 131 96  53 55 47  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  7 7 5  96 95 69  149 143 98
+176 171 126  194 191 148  210 208 158  239 239 170  251 251 187  251 251 187
+251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  177 172 135
+75 75 61  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  10 9 6  46 47 43  82 81 62  118 116 76  149 143 98
+176 171 126  194 191 148  210 208 158  214 212 158  214 212 158  210 208 158
+197 193 154  184 181 136  164 159 111  131 127 93  53 55 47  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  7 7 5  96 95 69  149 143 98
+174 170 121  194 189 146  204 201 155  214 212 158  239 239 170  251 251 187
+251 251 187  251 251 187  239 239 170  210 208 158  184 179 149  110 109 94
+12 12 9  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  10 9 6  43 44 41  82 81 62  115 113 82
+144 139 99  168 163 120  188 184 146  197 193 154  197 193 154  194 189 146
+184 181 136  174 170 121  151 147 98  118 116 76  36 38 35  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  4 3 2  82 81 62  142 137 94
+171 165 117  186 182 128  194 191 148  210 208 158  214 212 158  224 223 159
+239 239 170  224 223 159  210 208 158  184 179 149  137 133 100  36 38 35
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  7 7 5  36 38 35  71 71 57
+103 101 77  131 127 93  155 149 109  168 163 120  168 163 120  168 163 120
+164 159 111  149 143 98  125 122 87  82 81 62  13 12 7  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  61 61 53  125 122 87
+160 154 106  174 170 121  184 181 136  194 189 146  204 201 155  210 208 158
+210 208 158  204 201 155  184 179 149  145 141 105  61 61 53  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  3 3 2  30 31 28
+61 61 53  82 81 62  103 101 77  121 119 87  125 122 87  125 122 87
+118 116 76  103 101 77  79 78 62  24 26 24  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  25 27 25  96 95 69
+142 137 94  160 154 106  171 165 117  178 174 128  184 181 136  184 181 136
+181 176 137  177 172 135  145 141 105  75 75 61  5 5 3  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+16 17 12  40 41 39  61 61 53  71 71 57  71 71 57  71 71 57
+66 65 55  43 44 41  12 12 9  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  46 47 43
+96 95 69  125 122 87  142 137 94  149 145 103  155 149 109  155 149 109
+145 141 105  121 119 87  66 65 55  7 7 5  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  1 1 1  16 17 12  24 26 24  25 27 25  19 20 18
+7 7 5  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 2 1
+25 27 25  61 61 53  82 81 62  96 95 69  96 95 69  82 81 62
+61 61 53  25 27 25  2 2 1  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  5 6 5  13 12 7  10 9 6  3 4 3
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0
diff --git a/drivers/video/logo/logo_linux_vga16.ppm b/drivers/video/logo/logo_linux_vga16.ppm
index 1850c15e6fe..12ac3a5454c 100644
--- a/drivers/video/logo/logo_linux_vga16.ppm
+++ b/drivers/video/logo/logo_linux_vga16.ppm
@@ -1,1604 +1,2739 @@
 P3
-# Standard 16-color Linux logo
-80 80
+142 114
 255
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85  85  85  85  85  85  85  85  85  85
- 85  85  85  85  85  85  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85  85  85  85
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
- 85  85  85  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85 170 170 170   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-170 170 170 170 170 170  85  85  85   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0  85  85  85 170 170 170   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170 170 170 170 170 170
-170 170 170   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
- 85  85  85 170 170 170 170 170 170 170 170 170
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0  85  85  85
-170 170 170 170 170 170 255 255 255 255 255 255
-  0   0   0   0   0   0   0   0   0   0   0   0
-170 170 170 255 255 255 170 170 170 170 170 170
-255 255 255 170 170 170   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0  85  85  85
-170 170 170   0   0   0   0   0   0 255 255 255
- 85  85  85   0   0   0   0   0   0   0   0   0
-255 255 255 170 170 170   0   0   0  85  85  85
-170 170 170 255 255 255 170 170 170   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0  85  85  85
- 85  85  85   0   0   0   0   0   0 170 170 170
- 85  85  85   0   0   0   0   0   0   0   0   0
-255 255 255  85  85  85   0   0   0   0   0   0
- 85  85  85 255 255 255 170 170 170   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0  85  85  85
-170 170 170   0   0   0   0   0   0 170 170 170
- 85  85  85  85  85  85  85  85  85  85  85  85
-255 255 255  85  85  85   0   0   0   0   0   0
- 85  85  85 255 255 255 170 170 170   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-255 255 255   0   0   0   0   0   0 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0   0   0   0   0   0   0
- 85  85  85 255 255 255   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-170 170 170 170 170 170 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170 170 170 170 170 170   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85  85  85  85   0   0   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 170  85   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85  85  85  85   0   0   0
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 170  85   0
-170  85   0 170  85   0  85  85  85   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85  85  85  85   0   0   0
- 85  85  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0  85  85  85   0   0   0
-  0   0   0  85  85  85 170 170 170  85  85  85
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85  85  85  85   0   0   0
- 85  85  85 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170 170 170 170 170 170 170 170 170   0   0   0
-  0   0   0   0   0   0 170 170 170 170 170 170
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
- 85  85  85 170 170 170 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170  85  85  85
-  0   0   0   0   0   0  85  85  85  85  85  85
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
- 85  85  85 170 170 170 170 170 170 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0  85  85  85
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0 170 170 170
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0  85  85  85 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0  85  85  85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0  85  85  85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0  85  85  85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
- 85  85  85 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-170 170 170 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170  85  85  85
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
-  0   0   0   0   0   0   0   0   0  85  85  85
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
- 85  85  85   0   0   0   0   0   0  85  85  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170  85  85  85   0   0   0   0   0   0
-  0   0   0  85  85  85  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0  85  85  85
-  0   0   0   0   0   0  85  85  85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170   0   0   0  85  85  85
- 85  85  85   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0  85  85  85
-  0   0   0  85  85  85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170   0   0   0  85  85  85
- 85  85  85   0   0   0  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0  85  85  85
-  0   0   0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0  85  85  85   0   0   0
-  0   0   0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0  85  85  85   0   0   0
- 85  85  85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0  85  85  85   0   0   0   0   0   0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0  85  85  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0  85  85  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85  85  85  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255   0   0   0
- 85  85  85  85  85  85  85  85  85  85  85  85
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85   0   0   0 170  85   0
-255 255  85 170  85   0   0   0   0   0   0   0
- 85  85  85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0  85  85  85  85  85  85   0   0   0
-  0   0   0  85  85  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0   0   0   0
-  0   0   0  85  85  85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255  85 170  85   0 255 255  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85  85  85  85
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-  0   0   0   0   0   0  85  85  85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255  85
-170  85   0 255 255  85 170  85   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-170  85   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0   0   0   0   0   0   0  85  85  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170  85   0
-255 255  85 170  85   0 255 255  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0 170  85   0
-255 255  85 170  85   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85   0   0   0   0   0   0   0   0   0
- 85  85  85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255  85
-170  85   0 255 255  85 170  85   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0 255 255  85
-170  85   0 255 255  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85   0   0   0   0   0   0
-  0   0   0  85  85  85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 255 255  85 170  85   0
-255 255  85 170  85   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85   0   0   0
-  0   0   0   0   0   0  85  85  85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0   0   0   0   0   0   0   0   0   0
-  0   0   0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85   0   0   0   0   0   0   0   0   0
- 85  85  85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170  85  85  85 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85  85  85  85  85  85  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170  85  85  85  85  85  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
- 85  85  85   0   0   0   0   0   0 170  85   0
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170  85  85  85
-  0   0   0   0   0   0   0   0   0 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170  85  85  85  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0 170  85   0
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 170  85   0
-170  85   0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170  85  85  85
- 85  85  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-170  85   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85 170  85   0
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 170  85   0 170  85   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 170  85   0
-170  85   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-170  85   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-170  85   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0  85  85  85 170  85   0
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 170  85   0 170  85   0 170  85   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 170  85   0
-170  85   0   0   0   0   0   0   0   0   0   0
- 85  85  85  85  85  85  85  85  85  85  85  85
- 85  85  85  85  85  85  85  85  85  85  85  85
- 85  85  85  85  85  85  85  85  85   0   0   0
-  0   0   0   0   0   0   0   0   0 170  85   0
-170  85   0 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 255 255  85 170  85   0
-170  85   0 170  85   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0 255 255  85 170  85   0
-255 255  85 170  85   0 170  85   0 170  85   0
- 85  85  85  85  85  85  85  85  85  85  85  85
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0  85  85  85
- 85  85  85  85  85  85  85  85  85 170  85   0
-170  85   0 170  85   0 170  85   0 255 255  85
-170  85   0 255 255  85 170  85   0 170  85   0
-170  85   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0 170  85   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-170  85   0 170  85   0 170  85   0 170  85   0
-170  85   0 170  85   0 170  85   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
-  0   0   0   0   0   0   0   0   0   0   0   0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  170 170 170  170 85 0  170 170 170  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+255 255 85  170 170 170  170 170 170  170 85 0  85 255 85  170 85 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  170 85 0
+170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  170 85 0  170 170 170
+170 170 170  170 85 0  170 170 170  170 170 170  170 85 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 255 85
+255 85 85  85 255 85  170 170 170  170 85 0  170 170 170  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  85 85 85
+170 170 170  170 85 0  170 170 170  85 85 85  170 85 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  85 85 85  170 85 0
+85 85 85  85 85 85  170 85 0  85 255 85  85 85 85  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  170 85 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 170 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+170 85 0  85 255 85  170 85 0  170 85 0  170 85 0  85 255 85
+170 85 0  170 85 0  0 170 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 170 0  170 85 0
+255 255 85  170 85 0  255 255 85  255 255 85  255 255 85  170 85 0
+255 255 85  85 255 85  170 85 0  170 85 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
+85 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
+255 255 85  170 85 0  255 255 85  85 255 85  170 85 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  170 85 0
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
+255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  85 255 85
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
+255 255 85  255 255 85  170 85 0  255 255 85  85 255 85  255 255 85
+255 255 85  170 85 0  255 255 85  170 85 0  255 255 85  170 85 0
+170 85 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  170 85 0  255 255 85  85 255 85  255 255 85
+170 170 170  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  255 255 85
+85 255 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  170 85 0  255 255 85  255 255 85  255 255 85
+255 255 255  255 255 85  255 255 85  170 85 0  255 255 85  170 85 0
+255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  255 255 85
+170 85 0  170 85 0  0 170 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  170 85 0  85 255 85  255 255 85  170 170 170  255 255 255
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  170 85 0  255 255 85  85 255 85  255 255 85
+255 255 85  85 255 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  255 255 85  255 255 85  255 255 85  255 255 255  255 255 85
+255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  85 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
+255 255 85  170 85 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+170 85 0  170 85 0  255 255 85  255 255 85  255 255 255  170 170 170
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+170 85 0  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
+255 255 85  85 255 85  170 85 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+255 255 85  85 255 85  255 255 85  170 170 170  255 255 255  255 255 85
+255 255 85  255 255 85  170 85 0  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  85 255 85  170 85 0
+255 255 85  170 85 0  170 85 0  0 0 0  85 85 85  0 0 0
+85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
+85 255 85  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 170 0
+170 85 0  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  85 255 85  255 255 85  170 85 0  170 85 0
+170 85 0  85 255 85  255 255 85  85 85 85  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  85 255 85  170 170 170  170 170 170
+85 85 85  170 170 170  170 170 170  170 85 0  170 170 170  170 170 170
+85 255 85  170 170 170  170 85 0  170 170 170  85 255 85  255 85 85
+85 255 85  170 170 170  255 255 85  85 85 85  255 255 85  170 170 170
+85 255 85  170 170 170  255 255 85  170 170 170  170 170 170  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 255  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
+255 255 85  255 255 85  255 255 85  170 85 0  0 170 0  85 85 85
+170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  85 255 85
+255 85 85  85 255 85  85 85 85  255 85 85  85 85 85  170 170 170
+170 85 0  170 170 170  85 85 85  85 255 85  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+170 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
+170 85 0  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  170 85 0  255 255 85  85 85 85  85 85 85
+255 255 85  170 170 170  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  85 85 85  170 170 170  170 85 0  170 170 170
+170 170 170  255 255 85  170 170 170  85 85 85  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  170 85 0  170 85 0  0 170 0
+0 0 0  170 85 0  170 85 0  0 170 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  85 85 85  170 170 170  85 85 85
+170 170 170  85 85 85  85 85 85  170 170 170  170 85 0  85 85 85
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  255 255 85  170 85 0
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
+255 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
+170 85 0  255 255 85  85 255 85  255 255 85  255 255 85  170 85 0
+170 85 0  255 255 85  170 85 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  255 255 85  255 255 85
+255 255 85  255 255 85  170 85 0  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
+85 255 85  170 85 0  0 170 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 170 0  170 85 0  255 255 85
+85 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+170 85 0  255 255 85  85 255 85  255 255 85  255 255 85  170 85 0
+85 255 85  170 85 0  170 85 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  170 85 0  255 255 85  85 255 85  255 255 85  170 85 0
+255 255 85  255 255 85  170 85 0  255 255 85  170 85 0  85 255 85
+170 85 0  170 85 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  170 85 0
+255 255 85  170 85 0  255 255 85  170 85 0  255 255 85  85 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  170 85 0  255 255 85  85 255 85  170 85 0  170 85 0
+0 170 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  255 255 85  170 85 0  255 255 85  170 85 0  85 255 85
+255 255 85  85 255 85  170 85 0  170 85 0  85 255 85  170 85 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  85 255 85
+255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  255 255 85
+255 255 85  170 85 0  255 255 85  85 255 85  255 255 85  255 255 85
+170 85 0  170 85 0  85 255 85  170 85 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  85 85 85
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  255 255 85
+170 85 0  255 255 85  255 255 85  170 85 0  255 255 85  170 85 0
+255 255 85  85 255 85  170 85 0  255 255 85  170 85 0  85 255 85
+170 85 0  170 85 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  170 170 170  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  85 85 85  85 85 85  85 85 85
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  85 255 85
+170 85 0  255 255 85  170 85 0  85 255 85  170 85 0  170 85 0
+0 170 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  170 170 170  170 170 170  255 255 255  170 170 170
+170 170 170  170 170 170  85 85 85  85 85 85  85 85 85  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 255 85  255 255 85
+170 85 0  255 255 85  255 255 85  170 85 0  85 255 85  170 85 0
+255 255 85  170 85 0  0 170 0  170 85 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  170 170 170  170 170 170  170 170 170  85 85 85
+85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
+255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  170 85 0
+0 170 0  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+255 255 85  255 255 85  170 85 0  0 170 0  85 85 85  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  85 85 85
+170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  170 85 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+170 170 170  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
+255 255 255  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
+170 170 170  170 170 170  170 170 170  85 85 85  85 85 85  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  170 170 170
+255 255 255  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
+255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+255 255 255  255 255 255  170 170 170  255 255 255  170 170 170  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  170 170 170
+255 255 255  170 170 170  255 255 255  255 255 255  255 255 255  255 255 255
+255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
+255 255 255  255 255 255  170 170 170  255 255 255  255 255 255  255 255 255
+255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  170 170 170
+170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
+255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  170 170 170
+170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+170 170 170  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  85 85 85
+85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  170 170 170  85 85 85
+85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  170 170 170  85 85 85  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  170 170 170  170 170 170
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  170 170 170  85 85 85  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  255 255 255  170 170 170
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  170 170 170
+170 170 170  255 255 255  170 170 170  170 170 170
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
+255 255 255  255 255 255  170 170 170  170 170 170
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  170 170 170  170 170 170  255 255 255
+255 255 255  170 170 170  170 170 170  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+170 170 170  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  170 170 170  255 255 255  255 255 255  255 255 255
+170 170 170  170 170 170  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+170 170 170  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
+170 170 170  170 170 170  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
+170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+170 170 170  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  170 170 170  170 170 170  170 170 170
+255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  170 170 170  255 255 255  255 255 255  255 255 255
+255 255 255  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  170 170 170  255 255 255  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
+255 255 255  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  170 170 170  255 255 255  170 170 170  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+255 255 255  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  255 255 255  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  255 255 255  255 255 255  255 255 255  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  170 170 170
+255 255 255  170 170 170  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  170 170 170
+170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
+170 170 170  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+170 170 170  255 255 255  255 255 255  170 170 170  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  255 255 255
+255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
+170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  170 170 170  170 170 170
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+170 170 170  255 255 255  255 255 255  255 255 255  85 85 85  0 0 0
+0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
+0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  255 255 255
+255 255 255  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  255 255 255  255 255 255  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  255 255 255
+170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  255 255 255  255 255 255  255 255 255  255 255 255  0 0 0
+0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  255 255 255
+255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+170 170 170  255 255 255  170 170 170  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  170 170 170  85 85 85  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
+0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  255 255 255
+170 170 170  170 170 170  0 0 0  0 0 0  0 0 0  85 85 85
+170 170 170  255 255 255  255 255 255  0 0 0  0 0 0  85 85 85
+255 255 255  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 255
+255 255 255  255 255 255  170 170 170  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  255 255 255  170 170 170  170 170 170  170 170 170
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  170 170 170  255 255 255  170 170 170  170 170 170  85 85 85
+85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  170 170 170
+170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
+170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  170 170 170
+170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  170 170 170
+255 255 255  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  170 170 170  170 170 170  255 255 85  85 85 85
+85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+85 85 85  170 170 170  170 170 170  170 170 170  170 85 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  170 85 0
+170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+170 85 0  170 170 170  85 85 85  0 0 0  85 85 85  85 85 85
+170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  255 255 255
+170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+255 255 255  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  170 85 0  170 170 170  170 170 170  85 85 85
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  170 85 0  85 255 85  170 85 0  170 170 170  85 85 85
+85 85 85  0 0 0  0 0 0  85 85 85  170 85 0  85 255 85
+170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+85 85 85  85 85 85  170 85 0  0 0 0  85 85 85  85 85 85
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 255
+255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+170 170 170  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  170 170 170  170 85 0  170 170 170  170 85 0
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  255 85 85  170 170 170  85 255 85  170 85 0
+85 85 85  85 85 85  170 85 0  85 85 85  170 170 170  85 85 85
+170 170 170  170 85 0  85 85 85  85 85 85  85 85 85  85 85 85
+170 85 0  85 255 85  85 85 85  85 85 85  85 85 85  170 85 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  170 170 170
+255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 85 0  170 170 170  170 85 0  85 85 85  0 0 0
+85 85 85  85 85 85  85 255 85  170 170 170  170 170 170  170 85 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  85 255 85  255 85 85  170 170 170  170 170 170
+170 170 170  85 255 85  170 170 170  170 85 0  170 170 170  170 85 0
+170 170 170  85 85 85  85 255 85  170 85 0  170 170 170  170 85 0
+170 170 170  170 170 170  170 85 0  85 85 85  85 85 85  85 255 85
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  170 170 170  170 170 170  0 0 0  0 0 0  85 85 85
+170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  255 255 85  85 85 85  85 85 85  85 85 85
+85 255 85  255 85 85  170 170 170  170 85 0  170 170 170  85 255 85
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  170 85 0  170 170 170  170 170 170  255 255 85
+170 170 170  255 85 85  170 170 170  170 170 170  255 255 85  170 170 170
+85 255 85  170 170 170  255 85 85  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  170 85 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  170 170 170  85 85 85  0 0 0  85 85 85
+85 85 85  170 85 0  85 85 85  0 0 0  85 85 85  85 85 85
+85 85 85  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
+170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 85 85
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  170 170 170  255 255 85  170 170 170  170 170 170
+170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 85 0
+170 170 170  255 255 85  170 170 170  255 255 85  170 170 170  255 255 85
+170 170 170  255 255 85  170 170 170  170 170 170  85 255 85  170 85 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  170 170 170  85 85 85  85 85 85  0 0 0
+85 85 85  85 85 85  170 170 170  85 85 85  170 170 170  170 85 0
+170 170 170  85 255 85  170 170 170  170 85 0  170 170 170  170 170 170
+255 255 85  170 170 170  170 170 170  255 255 255  255 255 85  170 170 170
+255 255 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  255 255 255
+170 170 170  255 255 255  255 255 85  170 170 170  255 255 85  170 170 170
+255 255 85  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  255 85 85  170 170 170  170 170 170
+85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  170 85 0  85 85 85
+85 85 85  255 255 85  170 170 170  170 170 170  170 170 170  170 170 170
+255 255 85  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
+170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
+170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 255 85  170 170 170  255 255 85  255 255 255  255 255 255
+255 255 255  170 170 170  255 255 255  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  255 255 85  170 170 170  255 255 85  255 255 255
+255 255 85  255 255 255  255 255 85  170 170 170  170 170 170  170 85 0
+170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
+170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  255 255 85
+255 255 255  255 255 255  255 255 85  255 255 255  255 255 255  170 170 170
+255 255 85  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  170 170 170  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  170 170 170  170 170 170  170 170 170  255 255 255  170 170 170
+255 255 255  255 255 255  255 255 255  170 170 170  170 170 170  255 255 85
+170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
+255 255 255  255 255 255  170 170 170  255 255 85  170 170 170  255 255 85
+85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  170 170 170
+255 255 85  170 170 170  170 170 170  255 255 255  255 255 255  255 255 255
+170 170 170  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
+255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  255 255 255
+170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
+85 85 85  170 85 0  255 255 255  170 170 170  255 255 255  255 255 255
+255 255 85  255 255 255  170 170 170  255 255 85  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  255 255 85  255 255 255  255 255 255
+170 170 170  255 255 255  255 255 255  170 170 170  170 170 170  170 170 170
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 255 85  170 170 170
+170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
+255 255 255  255 255 255  255 255 85  170 170 170  170 170 170  255 255 255
+170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  255 255 85
+170 170 170  170 85 0  85 85 85  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  170 170 170  170 170 170  255 255 85  170 170 170  255 255 255
+255 255 255  170 170 170  255 255 255  170 170 170  170 170 170  255 255 85
+170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
+255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  255 255 85
+85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  170 170 170
+170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+255 255 85  255 255 255  170 170 170  255 255 255  170 170 170  170 170 170
+170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  85 85 85
+0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+85 85 85  85 85 85  170 170 170  170 170 170  255 255 255  170 170 170
+255 255 255  170 170 170  255 255 85  170 170 170  170 170 170  170 170 170
+255 85 85  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
+170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  170 170 170
+255 255 85  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
+255 255 85  255 255 255  170 170 170  255 255 85  170 170 170  170 170 170
+170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 255 85
+170 170 170  170 85 0  85 85 85  0 0 0  85 85 85  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
+170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  170 170 170  255 255 85  170 170 170  170 170 170
+255 255 85  170 170 170  170 170 170  170 170 170  170 170 170  255 85 85
+85 255 85  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+255 255 255  255 255 255  255 255 255  255 255 85  170 170 170  170 170 170
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 85
+170 170 170  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
+255 255 255  170 170 170  170 170 170  170 170 170  170 170 170  255 85 85
+170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
+170 170 170  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
+85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  170 170 170  170 170 170  170 170 170
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  170 85 0  170 170 170  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  85 255 85
+255 85 85  170 170 170  255 255 85  170 170 170  170 170 170  255 255 255
+255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  170 170 170
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+170 170 170  255 255 85  170 170 170  255 255 85  255 255 255  255 255 255
+170 170 170  170 170 170  255 255 85  170 170 170  255 85 85  85 255 85
+170 170 170  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
+170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  85 85 85  85 85 85  85 85 85  170 170 170  255 255 85
+170 170 170  170 85 0  170 170 170  170 170 170  170 85 0  85 85 85
+170 170 170  170 85 0  85 85 85  170 170 170  170 170 170  170 170 170
+170 170 170  255 255 255  255 255 255  255 255 85  170 170 170  170 170 170
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
+170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+255 255 255  170 170 170  170 170 170  170 85 0  170 170 170  85 85 85
+170 170 170  170 170 170  170 85 0  170 170 170  170 85 0  85 85 85
+85 255 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 85 85  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
+170 85 0  170 170 170  85 255 85  170 85 0  170 170 170  85 85 85
+170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  255 255 255
+255 255 85  255 255 255  170 170 170  170 170 170  170 170 170  170 85 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
+170 170 170  255 255 85  170 170 170  170 170 170  85 255 85  170 170 170
+170 85 0  170 85 0  170 170 170  85 255 85  85 85 85  170 170 170
+170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  170 170 170  85 85 85
+0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  85 85 85
+170 170 170  170 85 0  170 170 170  85 85 85  170 170 170  170 85 0
+170 170 170  85 255 85  170 85 0  170 170 170  170 170 170  170 170 170
+255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+170 85 0  170 170 170  255 255 85  170 170 170  255 255 255  170 170 170
+170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  170 85 0
+170 170 170  85 255 85  170 85 0  170 170 170  170 85 0  85 85 85
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+85 255 85  170 170 170  170 85 0  170 170 170  170 85 0  85 255 85
+170 170 170  170 85 0  170 170 170  170 170 170  170 170 170  255 255 85
+170 170 170  255 255 255  170 170 170  170 170 170  170 170 170  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 85 0  85 85 85  170 170 170  255 255 85  170 170 170
+170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 85 0
+170 170 170  85 85 85  170 170 170  170 85 0  170 170 170  85 85 85
+170 85 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  170 85 0
+85 85 85  255 85 85  85 255 85  170 85 0  170 170 170  170 170 170
+170 85 0  170 170 170  85 85 85  255 255 85  170 170 170  170 170 170
+255 255 255  170 170 170  255 255 255  255 255 85  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  170 170 170  170 85 0  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  255 255 85  85 85 85  170 170 170
+85 255 85  255 85 85  170 170 170  85 255 85  255 85 85  85 255 85
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
+85 85 85  85 255 85  255 85 85  170 170 170  85 255 85  170 85 0
+170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 255 255
+170 170 170  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  170 170 170  85 85 85  255 255 85
+170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  255 255 85
+85 85 85  255 255 85  170 170 170  170 85 0  170 170 170  85 85 85
+170 85 0  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+170 170 170  170 85 0  170 170 170  170 85 0  170 170 170  170 170 170
+170 85 0  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+255 255 85  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
+170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  255 255 85  170 170 170  170 85 0
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+170 85 0  85 255 85  170 170 170  170 170 170  255 255 85  170 170 170
+255 255 85  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
+255 255 255  170 170 170  255 255 85  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  170 85 0
+170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
+170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 170 170
+170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  170 85 0  170 170 170  170 85 0  170 170 170  170 170 170
+170 170 170  255 255 85  170 170 170  255 255 85  170 170 170  255 255 255
+170 170 170  255 255 255  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
+170 85 0  170 170 170  170 85 0  255 255 85  170 170 170  170 170 170
+170 170 170  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
+255 255 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
+170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
+170 170 170  170 170 170  170 170 170  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 170 0  85 85 85
+170 85 0  85 255 85  170 170 170  170 170 170  170 170 170  255 255 85
+255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+170 170 170  255 255 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+170 85 0  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
+170 170 170  255 255 255  170 170 170  255 255 255  170 170 170  255 255 255
+255 255 255  255 255 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
+170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  255 255 255
+170 170 170  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 255 85
+170 170 170  255 255 85  170 170 170  255 255 85  255 255 255  255 255 255
+255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
+170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  85 85 85  170 85 0  170 170 170  170 170 170
+255 255 85  170 170 170  255 255 255  255 255 85  255 255 255  255 255 255
+170 170 170  255 255 85  170 170 170  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
+170 170 170  170 170 170  170 170 170  255 255 255  170 170 170  255 255 255
+170 170 170  255 255 255  170 170 170  255 255 255  255 255 85  255 255 255
+170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  170 85 0  85 85 85  170 170 170  170 170 170  170 170 170
+170 170 170  255 255 255  170 170 170  255 255 255  255 255 255  170 170 170
+255 255 85  170 170 170  170 170 170  170 85 0  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+255 255 85  170 170 170  255 255 85  170 170 170  255 255 255  255 255 255
+255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
+170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  85 85 85  170 85 0  170 170 170
+255 255 85  170 170 170  255 255 85  255 255 255  170 170 170  255 255 255
+170 170 170  170 170 170  170 170 170  170 170 170  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
+170 85 0  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
+255 255 255  255 255 255  170 170 170  255 255 255  255 255 85  170 170 170
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
+170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+255 255 85  170 170 170  170 85 0  85 255 85  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
+170 170 170  170 170 170  255 255 85  170 170 170  255 255 255  255 255 255
+255 255 85  255 255 255  170 170 170  255 255 255  170 170 170  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
+170 170 170  170 170 170  170 170 170  170 85 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+255 255 85  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
+255 255 255  170 170 170  255 255 85  170 170 170  85 85 85  85 85 85
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  170 170 170
+170 85 0  170 170 170  170 85 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
+170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  170 170 170
+170 170 170  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+85 85 85  85 85 85  85 85 85  170 85 0  85 85 85  170 85 0
+85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  170 85 0
+85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  255 255 85
+170 170 170  170 170 170  170 85 0  85 85 85  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
+85 85 85  85 255 85  170 85 0  170 170 170  170 85 0  170 170 170
+85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
+85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
+0 0 0  0 0 0  0 0 0  0 0 0
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 8a75d05f433..fa1a512ce03 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -34,240 +34,240 @@
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
-#define MX3FB_NAME             "mx3_sdc_fb"
+#define MX3FB_NAME		"mx3_sdc_fb"
 
-#define MX3FB_REG_OFFSET       0xB4
+#define MX3FB_REG_OFFSET	0xB4
 
 /* SDC Registers */
-#define SDC_COM_CONF           (0xB4 - MX3FB_REG_OFFSET)
-#define SDC_GW_CTRL            (0xB8 - MX3FB_REG_OFFSET)
-#define SDC_FG_POS             (0xBC - MX3FB_REG_OFFSET)
-#define SDC_BG_POS             (0xC0 - MX3FB_REG_OFFSET)
-#define SDC_CUR_POS            (0xC4 - MX3FB_REG_OFFSET)
-#define SDC_PWM_CTRL           (0xC8 - MX3FB_REG_OFFSET)
-#define SDC_CUR_MAP            (0xCC - MX3FB_REG_OFFSET)
-#define SDC_HOR_CONF           (0xD0 - MX3FB_REG_OFFSET)
-#define SDC_VER_CONF           (0xD4 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_1       (0xD8 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_2       (0xDC - MX3FB_REG_OFFSET)
+#define SDC_COM_CONF		(0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL		(0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS		(0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS		(0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS		(0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL		(0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP		(0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF		(0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF		(0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1	(0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2	(0xDC - MX3FB_REG_OFFSET)
 
 /* Register bits */
-#define SDC_COM_TFT_COLOR      0x00000001UL
-#define SDC_COM_FG_EN          0x00000010UL
-#define SDC_COM_GWSEL          0x00000020UL
-#define SDC_COM_GLB_A          0x00000040UL
-#define SDC_COM_KEY_COLOR_G    0x00000080UL
-#define SDC_COM_BG_EN          0x00000200UL
-#define SDC_COM_SHARP          0x00001000UL
+#define SDC_COM_TFT_COLOR	0x00000001UL
+#define SDC_COM_FG_EN		0x00000010UL
+#define SDC_COM_GWSEL		0x00000020UL
+#define SDC_COM_GLB_A		0x00000040UL
+#define SDC_COM_KEY_COLOR_G	0x00000080UL
+#define SDC_COM_BG_EN		0x00000200UL
+#define SDC_COM_SHARP		0x00001000UL
 
-#define SDC_V_SYNC_WIDTH_L     0x00000001UL
+#define SDC_V_SYNC_WIDTH_L	0x00000001UL
 
 /* Display Interface registers */
-#define DI_DISP_IF_CONF                (0x0124 - MX3FB_REG_OFFSET)
-#define DI_DISP_SIG_POL                (0x0128 - MX3FB_REG_OFFSET)
-#define DI_SER_DISP1_CONF      (0x012C - MX3FB_REG_OFFSET)
-#define DI_SER_DISP2_CONF      (0x0130 - MX3FB_REG_OFFSET)
-#define DI_HSP_CLK_PER         (0x0134 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_1   (0x0138 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_2   (0x013C - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_3   (0x0140 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_1   (0x0144 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_2   (0x0148 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_3   (0x014C - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_1   (0x0150 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_2   (0x0154 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_3   (0x0158 - MX3FB_REG_OFFSET)
-#define DI_DISP3_TIME_CONF     (0x015C - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB0_MAP       (0x0160 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB1_MAP       (0x0164 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB2_MAP       (0x0168 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB0_MAP       (0x016C - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB1_MAP       (0x0170 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB2_MAP       (0x0174 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB0_MAP       (0x0178 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB1_MAP       (0x017C - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB2_MAP       (0x0180 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB0_MAP       (0x0184 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB1_MAP       (0x0188 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB2_MAP       (0x018C - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB0_MAP       (0x0190 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB1_MAP       (0x0194 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB2_MAP       (0x0198 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB0_MAP       (0x019C - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB1_MAP       (0x01A0 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB2_MAP       (0x01A4 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B0_MAP                (0x01A8 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B1_MAP                (0x01AC - MX3FB_REG_OFFSET)
-#define DI_DISP3_B2_MAP                (0x01B0 - MX3FB_REG_OFFSET)
-#define DI_DISP_ACC_CC         (0x01B4 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_CONF       (0x01B8 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_DATA       (0x01BC - MX3FB_REG_OFFSET)
+#define DI_DISP_IF_CONF		(0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL		(0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF	(0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF	(0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER		(0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1	(0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2	(0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3	(0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1	(0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2	(0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3	(0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1	(0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2	(0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3	(0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF	(0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP	(0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP	(0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP	(0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP	(0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP	(0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP	(0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP	(0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP	(0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP	(0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP	(0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP	(0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP	(0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP	(0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP	(0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP	(0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP	(0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP	(0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP	(0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP		(0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP		(0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP		(0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC		(0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF	(0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA	(0x01BC - MX3FB_REG_OFFSET)
 
 /* DI_DISP_SIG_POL bits */
-#define DI_D3_VSYNC_POL_SHIFT          28
-#define DI_D3_HSYNC_POL_SHIFT          27
-#define DI_D3_DRDY_SHARP_POL_SHIFT     26
-#define DI_D3_CLK_POL_SHIFT            25
-#define DI_D3_DATA_POL_SHIFT           24
+#define DI_D3_VSYNC_POL_SHIFT		28
+#define DI_D3_HSYNC_POL_SHIFT		27
+#define DI_D3_DRDY_SHARP_POL_SHIFT	26
+#define DI_D3_CLK_POL_SHIFT		25
+#define DI_D3_DATA_POL_SHIFT		24
 
 /* DI_DISP_IF_CONF bits */
-#define DI_D3_CLK_IDLE_SHIFT           26
-#define DI_D3_CLK_SEL_SHIFT            25
-#define DI_D3_DATAMSK_SHIFT            24
+#define DI_D3_CLK_IDLE_SHIFT		26
+#define DI_D3_CLK_SEL_SHIFT		25
+#define DI_D3_DATAMSK_SHIFT		24
 
 enum ipu_panel {
-       IPU_PANEL_SHARP_TFT,
-       IPU_PANEL_TFT,
+	IPU_PANEL_SHARP_TFT,
+	IPU_PANEL_TFT,
 };
 
 struct ipu_di_signal_cfg {
-       unsigned datamask_en:1;
-       unsigned clksel_en:1;
-       unsigned clkidle_en:1;
-       unsigned data_pol:1;    /* true = inverted */
-       unsigned clk_pol:1;     /* true = rising edge */
-       unsigned enable_pol:1;
-       unsigned Hsync_pol:1;   /* true = active high */
-       unsigned Vsync_pol:1;
+	unsigned datamask_en:1;
+	unsigned clksel_en:1;
+	unsigned clkidle_en:1;
+	unsigned data_pol:1;	/* true = inverted */
+	unsigned clk_pol:1;	/* true = rising edge */
+	unsigned enable_pol:1;
+	unsigned Hsync_pol:1;	/* true = active high */
+	unsigned Vsync_pol:1;
 };
 
 static const struct fb_videomode mx3fb_modedb[] = {
-       {
-               /* 240x320 @ 60 Hz */
-               .name           = "Sharp-QVGA",
-               .refresh        = 60,
-               .xres           = 240,
-               .yres           = 320,
-               .pixclock       = 185925,
-               .left_margin    = 9,
-               .right_margin   = 16,
-               .upper_margin   = 7,
-               .lower_margin   = 9,
-               .hsync_len      = 1,
-               .vsync_len      = 1,
-               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
-                                 FB_SYNC_CLK_IDLE_EN,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* 240x33 @ 60 Hz */
-               .name           = "Sharp-CLI",
-               .refresh        = 60,
-               .xres           = 240,
-               .yres           = 33,
-               .pixclock       = 185925,
-               .left_margin    = 9,
-               .right_margin   = 16,
-               .upper_margin   = 7,
-               .lower_margin   = 9 + 287,
-               .hsync_len      = 1,
-               .vsync_len      = 1,
-               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
-                                 FB_SYNC_CLK_IDLE_EN,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* 640x480 @ 60 Hz */
-               .name           = "NEC-VGA",
-               .refresh        = 60,
-               .xres           = 640,
-               .yres           = 480,
-               .pixclock       = 38255,
-               .left_margin    = 144,
-               .right_margin   = 0,
-               .upper_margin   = 34,
-               .lower_margin   = 40,
-               .hsync_len      = 1,
-               .vsync_len      = 1,
-               .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* NTSC TV output */
-               .name           = "TV-NTSC",
-               .refresh        = 60,
-               .xres           = 640,
-               .yres           = 480,
-               .pixclock       = 37538,
-               .left_margin    = 38,
-               .right_margin   = 858 - 640 - 38 - 3,
-               .upper_margin   = 36,
-               .lower_margin   = 518 - 480 - 36 - 1,
-               .hsync_len      = 3,
-               .vsync_len      = 1,
-               .sync           = 0,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* PAL TV output */
-               .name           = "TV-PAL",
-               .refresh        = 50,
-               .xres           = 640,
-               .yres           = 480,
-               .pixclock       = 37538,
-               .left_margin    = 38,
-               .right_margin   = 960 - 640 - 38 - 32,
-               .upper_margin   = 32,
-               .lower_margin   = 555 - 480 - 32 - 3,
-               .hsync_len      = 32,
-               .vsync_len      = 3,
-               .sync           = 0,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* TV output VGA mode, 640x480 @ 65 Hz */
-               .name           = "TV-VGA",
-               .refresh        = 60,
-               .xres           = 640,
-               .yres           = 480,
-               .pixclock       = 40574,
-               .left_margin    = 35,
-               .right_margin   = 45,
-               .upper_margin   = 9,
-               .lower_margin   = 1,
-               .hsync_len      = 46,
-               .vsync_len      = 5,
-               .sync           = 0,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       },
+	{
+		/* 240x320 @ 60 Hz */
+		.name		= "Sharp-QVGA",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+				  FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+				  FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x33 @ 60 Hz */
+		.name		= "Sharp-CLI",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 33,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9 + 287,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+				  FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+				  FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 640x480 @ 60 Hz */
+		.name		= "NEC-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 34,
+		.lower_margin	= 40,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* NTSC TV output */
+		.name		= "TV-NTSC",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 37538,
+		.left_margin	= 38,
+		.right_margin	= 858 - 640 - 38 - 3,
+		.upper_margin	= 36,
+		.lower_margin	= 518 - 480 - 36 - 1,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* PAL TV output */
+		.name		= "TV-PAL",
+		.refresh	= 50,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 37538,
+		.left_margin	= 38,
+		.right_margin	= 960 - 640 - 38 - 32,
+		.upper_margin	= 32,
+		.lower_margin	= 555 - 480 - 32 - 3,
+		.hsync_len	= 32,
+		.vsync_len	= 3,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* TV output VGA mode, 640x480 @ 65 Hz */
+		.name		= "TV-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 40574,
+		.left_margin	= 35,
+		.right_margin	= 45,
+		.upper_margin	= 9,
+		.lower_margin	= 1,
+		.hsync_len	= 46,
+		.vsync_len	= 5,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
 };
 
 struct mx3fb_data {
-       struct fb_info          *fbi;
-       int                     backlight_level;
-       void __iomem            *reg_base;
-       spinlock_t              lock;
-       struct device           *dev;
-
-       uint32_t                h_start_width;
-       uint32_t                v_start_width;
+	struct fb_info		*fbi;
+	int			backlight_level;
+	void __iomem		*reg_base;
+	spinlock_t		lock;
+	struct device		*dev;
+
+	uint32_t		h_start_width;
+	uint32_t		v_start_width;
 };
 
 struct dma_chan_request {
-       struct mx3fb_data       *mx3fb;
-       enum ipu_channel        id;
+	struct mx3fb_data	*mx3fb;
+	enum ipu_channel	id;
 };
 
 /* MX3 specific framebuffer information. */
 struct mx3fb_info {
-       int                             blank;
-       enum ipu_channel                ipu_ch;
-       uint32_t                        cur_ipu_buf;
+	int				blank;
+	enum ipu_channel		ipu_ch;
+	uint32_t			cur_ipu_buf;
 
-       u32                             pseudo_palette[16];
+	u32				pseudo_palette[16];
 
-       struct completion               flip_cmpl;
-       struct mutex                    mutex;  /* Protects fb-ops */
-       struct mx3fb_data               *mx3fb;
-       struct idmac_channel            *idmac_channel;
-       struct dma_async_tx_descriptor  *txd;
-       dma_cookie_t                    cookie;
-       struct scatterlist              sg[2];
+	struct completion		flip_cmpl;
+	struct mutex			mutex;	/* Protects fb-ops */
+	struct mx3fb_data		*mx3fb;
+	struct idmac_channel		*idmac_channel;
+	struct dma_async_tx_descriptor	*txd;
+	dma_cookie_t			cookie;
+	struct scatterlist		sg[2];
 
-       u32                             sync;   /* preserve var->sync flags */
+	u32				sync;	/* preserve var->sync flags */
 };
 
 static void mx3fb_dma_done(void *);
@@ -278,389 +278,389 @@ static unsigned long default_bpp = 16;
 
 static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
 {
-       return __raw_readl(mx3fb->reg_base + reg);
+	return __raw_readl(mx3fb->reg_base + reg);
 }
 
 static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
 {
-       __raw_writel(value, mx3fb->reg_base + reg);
+	__raw_writel(value, mx3fb->reg_base + reg);
 }
 
 static const uint32_t di_mappings[] = {
-       0x1600AAAA, 0x00E05555, 0x00070000, 3,  /* RGB888 */
-       0x0005000F, 0x000B000F, 0x0011000F, 1,  /* RGB666 */
-       0x0011000F, 0x000B000F, 0x0005000F, 1,  /* BGR666 */
-       0x0004003F, 0x000A000F, 0x000F003F, 1   /* RGB565 */
+	0x1600AAAA, 0x00E05555, 0x00070000, 3,	/* RGB888 */
+	0x0005000F, 0x000B000F, 0x0011000F, 1,	/* RGB666 */
+	0x0011000F, 0x000B000F, 0x0005000F, 1,	/* BGR666 */
+	0x0004003F, 0x000A000F, 0x000F003F, 1	/* RGB565 */
 };
 
 static void sdc_fb_init(struct mx3fb_info *fbi)
 {
-       struct mx3fb_data *mx3fb = fbi->mx3fb;
-       uint32_t reg;
+	struct mx3fb_data *mx3fb = fbi->mx3fb;
+	uint32_t reg;
 
-       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+	reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
 
-       mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+	mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
 }
 
 /* Returns enabled flag before uninit */
 static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
 {
-       struct mx3fb_data *mx3fb = fbi->mx3fb;
-       uint32_t reg;
+	struct mx3fb_data *mx3fb = fbi->mx3fb;
+	uint32_t reg;
 
-       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+	reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
 
-       mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+	mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
 
-       return reg & SDC_COM_BG_EN;
+	return reg & SDC_COM_BG_EN;
 }
 
 static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
 {
-       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
-       struct dma_chan *dma_chan = &ichan->dma_chan;
-       unsigned long flags;
-       dma_cookie_t cookie;
-
-       dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
-               to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
-
-       /* This enables the channel */
-       if (mx3_fbi->cookie < 0) {
-               mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
-                     &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
-               if (!mx3_fbi->txd) {
-                       dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
-                               dma_chan->chan_id);
-                       return;
-               }
-
-               mx3_fbi->txd->callback_param    = mx3_fbi->txd;
-               mx3_fbi->txd->callback          = mx3fb_dma_done;
-
-               cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
-               dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
-                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
-       } else {
-               if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
-                       dev_err(mx3fb->dev, "Cannot enable channel %d\n",
-                               dma_chan->chan_id);
-                       return;
-               }
-
-               /* Just re-activate the same buffer */
-               dma_async_issue_pending(dma_chan);
-               cookie = mx3_fbi->cookie;
-               dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
-                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
-       }
-
-       if (cookie >= 0) {
-               spin_lock_irqsave(&mx3fb->lock, flags);
-               sdc_fb_init(mx3_fbi);
-               mx3_fbi->cookie = cookie;
-               spin_unlock_irqrestore(&mx3fb->lock, flags);
-       }
-
-       /*
-        * Attention! Without this msleep the channel keeps generating
-        * interrupts. Next sdc_set_brightness() is going to be called
-        * from mx3fb_blank().
-        */
-       msleep(2);
+	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+	struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+	struct dma_chan *dma_chan = &ichan->dma_chan;
+	unsigned long flags;
+	dma_cookie_t cookie;
+
+	dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+		to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+
+	/* This enables the channel */
+	if (mx3_fbi->cookie < 0) {
+		mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+		      &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+		if (!mx3_fbi->txd) {
+			dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+				dma_chan->chan_id);
+			return;
+		}
+
+		mx3_fbi->txd->callback_param	= mx3_fbi->txd;
+		mx3_fbi->txd->callback		= mx3fb_dma_done;
+
+		cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+		dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+		       mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+	} else {
+		if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+			dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+				dma_chan->chan_id);
+			return;
+		}
+
+		/* Just re-activate the same buffer */
+		dma_async_issue_pending(dma_chan);
+		cookie = mx3_fbi->cookie;
+		dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+		       mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+	}
+
+	if (cookie >= 0) {
+		spin_lock_irqsave(&mx3fb->lock, flags);
+		sdc_fb_init(mx3_fbi);
+		mx3_fbi->cookie = cookie;
+		spin_unlock_irqrestore(&mx3fb->lock, flags);
+	}
+
+	/*
+	 * Attention! Without this msleep the channel keeps generating
+	 * interrupts. Next sdc_set_brightness() is going to be called
+	 * from mx3fb_blank().
+	 */
+	msleep(2);
 }
 
 static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
 {
-       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-       uint32_t enabled;
-       unsigned long flags;
+	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+	uint32_t enabled;
+	unsigned long flags;
 
-       spin_lock_irqsave(&mx3fb->lock, flags);
+	spin_lock_irqsave(&mx3fb->lock, flags);
 
-       enabled = sdc_fb_uninit(mx3_fbi);
+	enabled = sdc_fb_uninit(mx3_fbi);
 
-       spin_unlock_irqrestore(&mx3fb->lock, flags);
+	spin_unlock_irqrestore(&mx3fb->lock, flags);
 
-       mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
-       mx3_fbi->txd = NULL;
-       mx3_fbi->cookie = -EINVAL;
+	mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+	mx3_fbi->txd = NULL;
+	mx3_fbi->cookie = -EINVAL;
 }
 
 /**
  * sdc_set_window_pos() - set window position of the respective plane.
- * @mx3fb:     mx3fb context.
- * @channel:   IPU DMAC channel ID.
- * @x_pos:     X coordinate relative to the top left corner to place window at.
- * @y_pos:     Y coordinate relative to the top left corner to place window at.
- * @return:    0 on success or negative error code on failure.
+ * @mx3fb:	mx3fb context.
+ * @channel:	IPU DMAC channel ID.
+ * @x_pos:	X coordinate relative to the top left corner to place window at.
+ * @y_pos:	Y coordinate relative to the top left corner to place window at.
+ * @return:	0 on success or negative error code on failure.
  */
 static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
-                             int16_t x_pos, int16_t y_pos)
+			      int16_t x_pos, int16_t y_pos)
 {
-       x_pos += mx3fb->h_start_width;
-       y_pos += mx3fb->v_start_width;
+	x_pos += mx3fb->h_start_width;
+	y_pos += mx3fb->v_start_width;
 
-       if (channel != IDMAC_SDC_0)
-               return -EINVAL;
+	if (channel != IDMAC_SDC_0)
+		return -EINVAL;
 
-       mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
-       return 0;
+	mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+	return 0;
 }
 
 /**
  * sdc_init_panel() - initialize a synchronous LCD panel.
- * @mx3fb:             mx3fb context.
- * @panel:             panel type.
- * @pixel_clk:         desired pixel clock frequency in Hz.
- * @width:             width of panel in pixels.
- * @height:            height of panel in pixels.
- * @pixel_fmt:         pixel format of buffer as FOURCC ASCII code.
- * @h_start_width:     number of pixel clocks between the HSYNC signal pulse
- *                     and the start of valid data.
- * @h_sync_width:      width of the HSYNC signal in units of pixel clocks.
- * @h_end_width:       number of pixel clocks between the end of valid data
- *                     and the HSYNC signal for next line.
- * @v_start_width:     number of lines between the VSYNC signal pulse and the
- *                     start of valid data.
- * @v_sync_width:      width of the VSYNC signal in units of lines
- * @v_end_width:       number of lines between the end of valid data and the
- *                     VSYNC signal for next frame.
- * @sig:               bitfield of signal polarities for LCD interface.
- * @return:            0 on success or negative error code on failure.
+ * @mx3fb:		mx3fb context.
+ * @panel:		panel type.
+ * @pixel_clk:		desired pixel clock frequency in Hz.
+ * @width:		width of panel in pixels.
+ * @height:		height of panel in pixels.
+ * @pixel_fmt:		pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width:	number of pixel clocks between the HSYNC signal pulse
+ *			and the start of valid data.
+ * @h_sync_width:	width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width:	number of pixel clocks between the end of valid data
+ *			and the HSYNC signal for next line.
+ * @v_start_width:	number of lines between the VSYNC signal pulse and the
+ *			start of valid data.
+ * @v_sync_width:	width of the VSYNC signal in units of lines
+ * @v_end_width:	number of lines between the end of valid data and the
+ *			VSYNC signal for next frame.
+ * @sig:		bitfield of signal polarities for LCD interface.
+ * @return:		0 on success or negative error code on failure.
  */
 static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
-                         uint32_t pixel_clk,
-                         uint16_t width, uint16_t height,
-                         enum pixel_fmt pixel_fmt,
-                         uint16_t h_start_width, uint16_t h_sync_width,
-                         uint16_t h_end_width, uint16_t v_start_width,
-                         uint16_t v_sync_width, uint16_t v_end_width,
-                         struct ipu_di_signal_cfg sig)
+			  uint32_t pixel_clk,
+			  uint16_t width, uint16_t height,
+			  enum pixel_fmt pixel_fmt,
+			  uint16_t h_start_width, uint16_t h_sync_width,
+			  uint16_t h_end_width, uint16_t v_start_width,
+			  uint16_t v_sync_width, uint16_t v_end_width,
+			  struct ipu_di_signal_cfg sig)
 {
-       unsigned long lock_flags;
-       uint32_t reg;
-       uint32_t old_conf;
-       uint32_t div;
-       struct clk *ipu_clk;
+	unsigned long lock_flags;
+	uint32_t reg;
+	uint32_t old_conf;
+	uint32_t div;
+	struct clk *ipu_clk;
 
-       dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+	dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
 
-       if (v_sync_width == 0 || h_sync_width == 0)
-               return -EINVAL;
+	if (v_sync_width == 0 || h_sync_width == 0)
+		return -EINVAL;
 
-       /* Init panel size and blanking periods */
-       reg = ((uint32_t) (h_sync_width - 1) << 26) |
-               ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
-       mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+	/* Init panel size and blanking periods */
+	reg = ((uint32_t) (h_sync_width - 1) << 26) |
+		((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+	mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
 
 #ifdef DEBUG
-       printk(KERN_CONT " hor_conf %x,", reg);
+	printk(KERN_CONT " hor_conf %x,", reg);
 #endif
 
-       reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
-           ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
-       mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+	reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+	    ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+	mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
 
 #ifdef DEBUG
-       printk(KERN_CONT " ver_conf %x\n", reg);
+	printk(KERN_CONT " ver_conf %x\n", reg);
 #endif
 
-       mx3fb->h_start_width = h_start_width;
-       mx3fb->v_start_width = v_start_width;
-
-       switch (panel) {
-       case IPU_PANEL_SHARP_TFT:
-               mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
-               mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
-               mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
-               break;
-       case IPU_PANEL_TFT:
-               mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
-               break;
-       default:
-               return -EINVAL;
-       }
-
-       /* Init clocking */
-
-       /*
-        * Calculate divider: fractional part is 4 bits so simply multiple by
-        * 24 to get fractional part, as long as we stay under ~250MHz and on
-        * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
-        */
-       dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
-
-       ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
-       div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
-       clk_put(ipu_clk);
-
-       if (div < 0x40) {       /* Divider less than 4 */
-               dev_dbg(mx3fb->dev,
-                       "InitPanel() - Pixel clock divider less than 4\n");
-               div = 0x40;
-       }
-
-       spin_lock_irqsave(&mx3fb->lock, lock_flags);
-
-       /*
-        * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
-        * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
-        * debug. DISP3_IF_CLK_UP_WR is 0
-        */
-       mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
-
-       /* DI settings */
-       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
-       old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
-           sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
-           sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
-       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
-
-       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
-       old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
-           sig.clk_pol << DI_D3_CLK_POL_SHIFT |
-           sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
-           sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
-           sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
-       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
-
-       switch (pixel_fmt) {
-       case IPU_PIX_FMT_RGB24:
-               mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
-               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
-                            ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
-               break;
-       case IPU_PIX_FMT_RGB666:
-               mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
-               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
-                            ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
-               break;
-       case IPU_PIX_FMT_BGR666:
-               mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
-               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
-                            ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
-               break;
-       default:
-               mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
-               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
-                            ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
-               break;
-       }
-
-       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
-
-       dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
-               mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
-       dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
-               mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
-       dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
-               mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
-
-       return 0;
+	mx3fb->h_start_width = h_start_width;
+	mx3fb->v_start_width = v_start_width;
+
+	switch (panel) {
+	case IPU_PANEL_SHARP_TFT:
+		mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+		mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+		mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+		break;
+	case IPU_PANEL_TFT:
+		mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Init clocking */
+
+	/*
+	 * Calculate divider: fractional part is 4 bits so simply multiple by
+	 * 2^4 to get fractional part, as long as we stay under ~250MHz and on
+	 * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+	 */
+	dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+
+	ipu_clk = clk_get(mx3fb->dev, NULL);
+	div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+	clk_put(ipu_clk);
+
+	if (div < 0x40) {	/* Divider less than 4 */
+		dev_dbg(mx3fb->dev,
+			"InitPanel() - Pixel clock divider less than 4\n");
+		div = 0x40;
+	}
+
+	spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+	/*
+	 * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+	 * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+	 * debug. DISP3_IF_CLK_UP_WR is 0
+	 */
+	mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+
+	/* DI settings */
+	old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+	old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+	    sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+	    sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+	mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+
+	old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+	old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+	    sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+	    sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+	    sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+	    sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+	mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+
+	switch (pixel_fmt) {
+	case IPU_PIX_FMT_RGB24:
+		mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+		mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+		mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+		mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+			     ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+		break;
+	case IPU_PIX_FMT_RGB666:
+		mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+		mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+		mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+		mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+			     ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+		break;
+	case IPU_PIX_FMT_BGR666:
+		mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+		mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+		mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+		mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+			     ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+		break;
+	default:
+		mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+		mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+		mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+		mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+			     ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+		break;
+	}
+
+	spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+	dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+		mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+	dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+		mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+	dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+		mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+
+	return 0;
 }
 
 /**
  * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
- * @mx3fb:     mx3fb context.
- * @channel:   IPU DMAC channel ID.
- * @enable:    boolean to enable or disable color keyl.
- * @color_key: 24-bit RGB color to use as transparent color key.
- * @return:    0 on success or negative error code on failure.
+ * @mx3fb:	mx3fb context.
+ * @channel:	IPU DMAC channel ID.
+ * @enable:	boolean to enable or disable color keyl.
+ * @color_key:	24-bit RGB color to use as transparent color key.
+ * @return:	0 on success or negative error code on failure.
  */
 static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
-                            bool enable, uint32_t color_key)
+			     bool enable, uint32_t color_key)
 {
-       uint32_t reg, sdc_conf;
-       unsigned long lock_flags;
+	uint32_t reg, sdc_conf;
+	unsigned long lock_flags;
 
-       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+	spin_lock_irqsave(&mx3fb->lock, lock_flags);
 
-       sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-       if (channel == IDMAC_SDC_0)
-               sdc_conf &= ~SDC_COM_GWSEL;
-       else
-               sdc_conf |= SDC_COM_GWSEL;
+	sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+	if (channel == IDMAC_SDC_0)
+		sdc_conf &= ~SDC_COM_GWSEL;
+	else
+		sdc_conf |= SDC_COM_GWSEL;
 
-       if (enable) {
-               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
-               mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
-                            SDC_GW_CTRL);
+	if (enable) {
+		reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+		mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+			     SDC_GW_CTRL);
 
-               sdc_conf |= SDC_COM_KEY_COLOR_G;
-       } else {
-               sdc_conf &= ~SDC_COM_KEY_COLOR_G;
-       }
-       mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+		sdc_conf |= SDC_COM_KEY_COLOR_G;
+	} else {
+		sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+	}
+	mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
 
-       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+	spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
 
-       return 0;
+	return 0;
 }
 
 /**
  * sdc_set_global_alpha() - set global alpha blending modes.
- * @mx3fb:     mx3fb context.
- * @enable:    boolean to enable or disable global alpha blending. If disabled,
- *             per pixel blending is used.
- * @alpha:     global alpha value.
- * @return:    0 on success or negative error code on failure.
+ * @mx3fb:	mx3fb context.
+ * @enable:	boolean to enable or disable global alpha blending. If disabled,
+ *		per pixel blending is used.
+ * @alpha:	global alpha value.
+ * @return:	0 on success or negative error code on failure.
  */
 static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
 {
-       uint32_t reg;
-       unsigned long lock_flags;
+	uint32_t reg;
+	unsigned long lock_flags;
 
-       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+	spin_lock_irqsave(&mx3fb->lock, lock_flags);
 
-       if (enable) {
-               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
-               mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+	if (enable) {
+		reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+		mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
 
-               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-               mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
-       } else {
-               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-               mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
-       }
+		reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+		mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+	} else {
+		reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+		mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+	}
 
-       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+	spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
 
-       return 0;
+	return 0;
 }
 
 static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
 {
-       /* This might be board-specific */
-       mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
-       return;
+	/* This might be board-specific */
+	mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+	return;
 }
 
 static uint32_t bpp_to_pixfmt(int bpp)
 {
-       uint32_t pixfmt = 0;
-       switch (bpp) {
-       case 24:
-               pixfmt = IPU_PIX_FMT_BGR24;
-               break;
-       case 32:
-               pixfmt = IPU_PIX_FMT_BGR32;
-               break;
-       case 16:
-               pixfmt = IPU_PIX_FMT_RGB565;
-               break;
-       }
-       return pixfmt;
+	uint32_t pixfmt = 0;
+	switch (bpp) {
+	case 24:
+		pixfmt = IPU_PIX_FMT_BGR24;
+		break;
+	case 32:
+		pixfmt = IPU_PIX_FMT_BGR32;
+		break;
+	case 16:
+		pixfmt = IPU_PIX_FMT_RGB565;
+		break;
+	}
+	return pixfmt;
 }
 
 static int mx3fb_blank(int blank, struct fb_info *fbi);
@@ -669,300 +669,300 @@ static int mx3fb_unmap_video_memory(struct fb_info *fbi);
 
 /**
  * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
- * @info:      framebuffer information pointer
- * @return:    0 on success or negative error code on failure.
+ * @info:	framebuffer information pointer
+ * @return:	0 on success or negative error code on failure.
  */
 static int mx3fb_set_fix(struct fb_info *fbi)
 {
-       struct fb_fix_screeninfo *fix = &fbi->fix;
-       struct fb_var_screeninfo *var = &fbi->var;
+	struct fb_fix_screeninfo *fix = &fbi->fix;
+	struct fb_var_screeninfo *var = &fbi->var;
 
-       strncpy(fix->id, "DISP3 BG", 8);
+	strncpy(fix->id, "DISP3 BG", 8);
 
-       fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+	fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
 
-       fix->type = FB_TYPE_PACKED_PIXELS;
-       fix->accel = FB_ACCEL_NONE;
-       fix->visual = FB_VISUAL_TRUECOLOR;
-       fix->xpanstep = 1;
-       fix->ypanstep = 1;
+	fix->type = FB_TYPE_PACKED_PIXELS;
+	fix->accel = FB_ACCEL_NONE;
+	fix->visual = FB_VISUAL_TRUECOLOR;
+	fix->xpanstep = 1;
+	fix->ypanstep = 1;
 
-       return 0;
+	return 0;
 }
 
 static void mx3fb_dma_done(void *arg)
 {
-       struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
-       struct dma_chan *chan = tx_desc->txd.chan;
-       struct idmac_channel *ichannel = to_idmac_chan(chan);
-       struct mx3fb_data *mx3fb = ichannel->client;
-       struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+	struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+	struct dma_chan *chan = tx_desc->txd.chan;
+	struct idmac_channel *ichannel = to_idmac_chan(chan);
+	struct mx3fb_data *mx3fb = ichannel->client;
+	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
 
-       dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+	dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
 
-       /* We only need one interrupt, it will be re-enabled as needed */
-       disable_irq(ichannel->eof_irq);
+	/* We only need one interrupt, it will be re-enabled as needed */
+	disable_irq(ichannel->eof_irq);
 
-       complete(&mx3_fbi->flip_cmpl);
+	complete(&mx3_fbi->flip_cmpl);
 }
 
 /**
  * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi:       framebuffer information pointer.
- * @return:    0 on success or negative error code on failure.
+ * @fbi:	framebuffer information pointer.
+ * @return:	0 on success or negative error code on failure.
  */
 static int mx3fb_set_par(struct fb_info *fbi)
 {
-       u32 mem_len;
-       struct ipu_di_signal_cfg sig_cfg;
-       enum ipu_panel mode = IPU_PANEL_TFT;
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
-       struct idmac_video_param *video = &ichan->params.video;
-       struct scatterlist *sg = mx3_fbi->sg;
-       size_t screen_size;
-
-       dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
-
-       mutex_lock(&mx3_fbi->mutex);
-
-       /* Total cleanup */
-       if (mx3_fbi->txd)
-               sdc_disable_channel(mx3_fbi);
-
-       mx3fb_set_fix(fbi);
-
-       mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
-       if (mem_len > fbi->fix.smem_len) {
-               if (fbi->fix.smem_start)
-                       mx3fb_unmap_video_memory(fbi);
-
-               fbi->fix.smem_len = mem_len;
-               if (mx3fb_map_video_memory(fbi) < 0) {
-                       mutex_unlock(&mx3_fbi->mutex);
-                       return -ENOMEM;
-               }
-       }
-
-       screen_size = fbi->fix.line_length * fbi->var.yres;
-
-       sg_init_table(&sg[0], 1);
-       sg_init_table(&sg[1], 1);
-
-       sg_dma_address(&sg[0])  = fbi->fix.smem_start;
-       sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
-                   fbi->fix.smem_len,
-                   offset_in_page(fbi->screen_base));
-
-       if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
-               memset(&sig_cfg, 0, sizeof(sig_cfg));
-               if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
-                       sig_cfg.Hsync_pol = true;
-               if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
-                       sig_cfg.Vsync_pol = true;
-               if (fbi->var.sync & FB_SYNC_CLK_INVERT)
-                       sig_cfg.clk_pol = true;
-               if (fbi->var.sync & FB_SYNC_DATA_INVERT)
-                       sig_cfg.data_pol = true;
-               if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
-                       sig_cfg.enable_pol = true;
-               if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
-                       sig_cfg.clkidle_en = true;
-               if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
-                       sig_cfg.clksel_en = true;
-               if (fbi->var.sync & FB_SYNC_SHARP_MODE)
-                       mode = IPU_PANEL_SHARP_TFT;
-
-               dev_dbg(fbi->device, "pixclock = %ul Hz\n",
-                       (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
-
-               if (sdc_init_panel(mx3fb, mode,
-                                  (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
-                                  fbi->var.xres, fbi->var.yres,
-                                  (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
-                                  IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
-                                  fbi->var.left_margin,
-                                  fbi->var.hsync_len,
-                                  fbi->var.right_margin +
-                                  fbi->var.hsync_len,
-                                  fbi->var.upper_margin,
-                                  fbi->var.vsync_len,
-                                  fbi->var.lower_margin +
-                                  fbi->var.vsync_len, sig_cfg) != 0) {
-                       mutex_unlock(&mx3_fbi->mutex);
-                       dev_err(fbi->device,
-                               "mx3fb: Error initializing panel.\n");
-                       return -EINVAL;
-               }
-       }
-
-       sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
-
-       mx3_fbi->cur_ipu_buf    = 0;
-
-       video->out_pixel_fmt    = bpp_to_pixfmt(fbi->var.bits_per_pixel);
-       video->out_width        = fbi->var.xres;
-       video->out_height       = fbi->var.yres;
-       video->out_stride       = fbi->var.xres_virtual;
-
-       if (mx3_fbi->blank == FB_BLANK_UNBLANK)
-               sdc_enable_channel(mx3_fbi);
-
-       mutex_unlock(&mx3_fbi->mutex);
-
-       return 0;
+	u32 mem_len;
+	struct ipu_di_signal_cfg sig_cfg;
+	enum ipu_panel mode = IPU_PANEL_TFT;
+	struct mx3fb_info *mx3_fbi = fbi->par;
+	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+	struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+	struct idmac_video_param *video = &ichan->params.video;
+	struct scatterlist *sg = mx3_fbi->sg;
+	size_t screen_size;
+
+	dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+	mutex_lock(&mx3_fbi->mutex);
+
+	/* Total cleanup */
+	if (mx3_fbi->txd)
+		sdc_disable_channel(mx3_fbi);
+
+	mx3fb_set_fix(fbi);
+
+	mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+	if (mem_len > fbi->fix.smem_len) {
+		if (fbi->fix.smem_start)
+			mx3fb_unmap_video_memory(fbi);
+
+		fbi->fix.smem_len = mem_len;
+		if (mx3fb_map_video_memory(fbi) < 0) {
+			mutex_unlock(&mx3_fbi->mutex);
+			return -ENOMEM;
+		}
+	}
+
+	screen_size = fbi->fix.line_length * fbi->var.yres;
+
+	sg_init_table(&sg[0], 1);
+	sg_init_table(&sg[1], 1);
+
+	sg_dma_address(&sg[0])	= fbi->fix.smem_start;
+	sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+		    fbi->fix.smem_len,
+		    offset_in_page(fbi->screen_base));
+
+	if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+		memset(&sig_cfg, 0, sizeof(sig_cfg));
+		if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+			sig_cfg.Hsync_pol = true;
+		if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+			sig_cfg.Vsync_pol = true;
+		if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+			sig_cfg.clk_pol = true;
+		if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+			sig_cfg.data_pol = true;
+		if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+			sig_cfg.enable_pol = true;
+		if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+			sig_cfg.clkidle_en = true;
+		if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+			sig_cfg.clksel_en = true;
+		if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+			mode = IPU_PANEL_SHARP_TFT;
+
+		dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+			(u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+		if (sdc_init_panel(mx3fb, mode,
+				   (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+				   fbi->var.xres, fbi->var.yres,
+				   (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+				   IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+				   fbi->var.left_margin,
+				   fbi->var.hsync_len,
+				   fbi->var.right_margin +
+				   fbi->var.hsync_len,
+				   fbi->var.upper_margin,
+				   fbi->var.vsync_len,
+				   fbi->var.lower_margin +
+				   fbi->var.vsync_len, sig_cfg) != 0) {
+			mutex_unlock(&mx3_fbi->mutex);
+			dev_err(fbi->device,
+				"mx3fb: Error initializing panel.\n");
+			return -EINVAL;
+		}
+	}
+
+	sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+
+	mx3_fbi->cur_ipu_buf	= 0;
+
+	video->out_pixel_fmt	= bpp_to_pixfmt(fbi->var.bits_per_pixel);
+	video->out_width	= fbi->var.xres;
+	video->out_height	= fbi->var.yres;
+	video->out_stride	= fbi->var.xres_virtual;
+
+	if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+		sdc_enable_channel(mx3_fbi);
+
+	mutex_unlock(&mx3_fbi->mutex);
+
+	return 0;
 }
 
 /**
  * mx3fb_check_var() - check and adjust framebuffer variable parameters.
- * @var:       framebuffer variable parameters
- * @fbi:       framebuffer information pointer
+ * @var:	framebuffer variable parameters
+ * @fbi:	framebuffer information pointer
  */
 static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
 {
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       u32 vtotal;
-       u32 htotal;
-
-       dev_dbg(fbi->device, "%s\n", __func__);
-
-       if (var->xres_virtual < var->xres)
-               var->xres_virtual = var->xres;
-       if (var->yres_virtual < var->yres)
-               var->yres_virtual = var->yres;
-
-       if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
-           (var->bits_per_pixel != 16))
-               var->bits_per_pixel = default_bpp;
-
-       switch (var->bits_per_pixel) {
-       case 16:
-               var->red.length = 5;
-               var->red.offset = 11;
-               var->red.msb_right = 0;
-
-               var->green.length = 6;
-               var->green.offset = 5;
-               var->green.msb_right = 0;
-
-               var->blue.length = 5;
-               var->blue.offset = 0;
-               var->blue.msb_right = 0;
-
-               var->transp.length = 0;
-               var->transp.offset = 0;
-               var->transp.msb_right = 0;
-               break;
-       case 24:
-               var->red.length = 8;
-               var->red.offset = 16;
-               var->red.msb_right = 0;
-
-               var->green.length = 8;
-               var->green.offset = 8;
-               var->green.msb_right = 0;
-
-               var->blue.length = 8;
-               var->blue.offset = 0;
-               var->blue.msb_right = 0;
-
-               var->transp.length = 0;
-               var->transp.offset = 0;
-               var->transp.msb_right = 0;
-               break;
-       case 32:
-               var->red.length = 8;
-               var->red.offset = 16;
-               var->red.msb_right = 0;
-
-               var->green.length = 8;
-               var->green.offset = 8;
-               var->green.msb_right = 0;
-
-               var->blue.length = 8;
-               var->blue.offset = 0;
-               var->blue.msb_right = 0;
-
-               var->transp.length = 8;
-               var->transp.offset = 24;
-               var->transp.msb_right = 0;
-               break;
-       }
-
-       if (var->pixclock < 1000) {
-               htotal = var->xres + var->right_margin + var->hsync_len +
-                   var->left_margin;
-               vtotal = var->yres + var->lower_margin + var->vsync_len +
-                   var->upper_margin;
-               var->pixclock = (vtotal * htotal * 6UL) / 100UL;
-               var->pixclock = KHZ2PICOS(var->pixclock);
-               dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
-                       var->pixclock);
-       }
-
-       var->height = -1;
-       var->width = -1;
-       var->grayscale = 0;
-
-       /* Preserve sync flags */
-       var->sync |= mx3_fbi->sync;
-       mx3_fbi->sync |= var->sync;
-
-       return 0;
+	struct mx3fb_info *mx3_fbi = fbi->par;
+	u32 vtotal;
+	u32 htotal;
+
+	dev_dbg(fbi->device, "%s\n", __func__);
+
+	if (var->xres_virtual < var->xres)
+		var->xres_virtual = var->xres;
+	if (var->yres_virtual < var->yres)
+		var->yres_virtual = var->yres;
+
+	if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+	    (var->bits_per_pixel != 16))
+		var->bits_per_pixel = default_bpp;
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		var->red.length = 5;
+		var->red.offset = 11;
+		var->red.msb_right = 0;
+
+		var->green.length = 6;
+		var->green.offset = 5;
+		var->green.msb_right = 0;
+
+		var->blue.length = 5;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		var->transp.msb_right = 0;
+		break;
+	case 24:
+		var->red.length = 8;
+		var->red.offset = 16;
+		var->red.msb_right = 0;
+
+		var->green.length = 8;
+		var->green.offset = 8;
+		var->green.msb_right = 0;
+
+		var->blue.length = 8;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		var->transp.msb_right = 0;
+		break;
+	case 32:
+		var->red.length = 8;
+		var->red.offset = 16;
+		var->red.msb_right = 0;
+
+		var->green.length = 8;
+		var->green.offset = 8;
+		var->green.msb_right = 0;
+
+		var->blue.length = 8;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
+		var->transp.length = 8;
+		var->transp.offset = 24;
+		var->transp.msb_right = 0;
+		break;
+	}
+
+	if (var->pixclock < 1000) {
+		htotal = var->xres + var->right_margin + var->hsync_len +
+		    var->left_margin;
+		vtotal = var->yres + var->lower_margin + var->vsync_len +
+		    var->upper_margin;
+		var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+		var->pixclock = KHZ2PICOS(var->pixclock);
+		dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+			var->pixclock);
+	}
+
+	var->height = -1;
+	var->width = -1;
+	var->grayscale = 0;
+
+	/* Preserve sync flags */
+	var->sync |= mx3_fbi->sync;
+	mx3_fbi->sync |= var->sync;
+
+	return 0;
 }
 
 static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
 {
-       chan &= 0xffff;
-       chan >>= 16 - bf->length;
-       return chan << bf->offset;
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
 }
 
 static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
-                          unsigned int green, unsigned int blue,
-                          unsigned int trans, struct fb_info *fbi)
+			   unsigned int green, unsigned int blue,
+			   unsigned int trans, struct fb_info *fbi)
 {
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       u32 val;
-       int ret = 1;
-
-       dev_dbg(fbi->device, "%s\n", __func__);
-
-       mutex_lock(&mx3_fbi->mutex);
-       /*
-        * If greyscale is true, then we convert the RGB value
-        * to greyscale no matter what visual we are using.
-        */
-       if (fbi->var.grayscale)
-               red = green = blue = (19595 * red + 38470 * green +
-                                     7471 * blue) >> 16;
-       switch (fbi->fix.visual) {
-       case FB_VISUAL_TRUECOLOR:
-               /*
-                * 16-bit True Colour.  We encode the RGB value
-                * according to the RGB bitfield information.
-                */
-               if (regno < 16) {
-                       u32 *pal = fbi->pseudo_palette;
-
-                       val = chan_to_field(red, &fbi->var.red);
-                       val |= chan_to_field(green, &fbi->var.green);
-                       val |= chan_to_field(blue, &fbi->var.blue);
-
-                       pal[regno] = val;
-
-                       ret = 0;
-               }
-               break;
-
-       case FB_VISUAL_STATIC_PSEUDOCOLOR:
-       case FB_VISUAL_PSEUDOCOLOR:
-               break;
-       }
-       mutex_unlock(&mx3_fbi->mutex);
-
-       return ret;
+	struct mx3fb_info *mx3_fbi = fbi->par;
+	u32 val;
+	int ret = 1;
+
+	dev_dbg(fbi->device, "%s\n", __func__);
+
+	mutex_lock(&mx3_fbi->mutex);
+	/*
+	 * If greyscale is true, then we convert the RGB value
+	 * to greyscale no matter what visual we are using.
+	 */
+	if (fbi->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green +
+				      7471 * blue) >> 16;
+	switch (fbi->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/*
+		 * 16-bit True Colour.  We encode the RGB value
+		 * according to the RGB bitfield information.
+		 */
+		if (regno < 16) {
+			u32 *pal = fbi->pseudo_palette;
+
+			val = chan_to_field(red, &fbi->var.red);
+			val |= chan_to_field(green, &fbi->var.green);
+			val |= chan_to_field(blue, &fbi->var.blue);
+
+			pal[regno] = val;
+
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_STATIC_PSEUDOCOLOR:
+	case FB_VISUAL_PSEUDOCOLOR:
+		break;
+	}
+	mutex_unlock(&mx3_fbi->mutex);
+
+	return ret;
 }
 
 /**
@@ -970,152 +970,152 @@ static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
  */
 static int mx3fb_blank(int blank, struct fb_info *fbi)
 {
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-
-       dev_dbg(fbi->device, "%s\n", __func__);
-
-       dev_dbg(fbi->device, "blank = %d\n", blank);
-
-       if (mx3_fbi->blank == blank)
-               return 0;
-
-       mutex_lock(&mx3_fbi->mutex);
-       mx3_fbi->blank = blank;
-
-       switch (blank) {
-       case FB_BLANK_POWERDOWN:
-       case FB_BLANK_VSYNC_SUSPEND:
-       case FB_BLANK_HSYNC_SUSPEND:
-       case FB_BLANK_NORMAL:
-               sdc_disable_channel(mx3_fbi);
-               sdc_set_brightness(mx3fb, 0);
-               break;
-       case FB_BLANK_UNBLANK:
-               sdc_enable_channel(mx3_fbi);
-               sdc_set_brightness(mx3fb, mx3fb->backlight_level);
-               break;
-       }
-       mutex_unlock(&mx3_fbi->mutex);
-
-       return 0;
+	struct mx3fb_info *mx3_fbi = fbi->par;
+	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+
+	dev_dbg(fbi->device, "%s\n", __func__);
+
+	dev_dbg(fbi->device, "blank = %d\n", blank);
+
+	if (mx3_fbi->blank == blank)
+		return 0;
+
+	mutex_lock(&mx3_fbi->mutex);
+	mx3_fbi->blank = blank;
+
+	switch (blank) {
+	case FB_BLANK_POWERDOWN:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_NORMAL:
+		sdc_disable_channel(mx3_fbi);
+		sdc_set_brightness(mx3fb, 0);
+		break;
+	case FB_BLANK_UNBLANK:
+		sdc_enable_channel(mx3_fbi);
+		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+		break;
+	}
+	mutex_unlock(&mx3_fbi->mutex);
+
+	return 0;
 }
 
 /**
  * mx3fb_pan_display() - pan or wrap the display
- * @var:       variable screen buffer information.
- * @info:      framebuffer information pointer.
+ * @var:	variable screen buffer information.
+ * @info:	framebuffer information pointer.
  *
  * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
  */
 static int mx3fb_pan_display(struct fb_var_screeninfo *var,
-                            struct fb_info *fbi)
+			     struct fb_info *fbi)
 {
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       u32 y_bottom;
-       unsigned long base;
-       off_t offset;
-       dma_cookie_t cookie;
-       struct scatterlist *sg = mx3_fbi->sg;
-       struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
-       struct dma_async_tx_descriptor *txd;
-       int ret;
-
-       dev_dbg(fbi->device, "%s [%c]\n", __func__,
-               list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
-
-       if (var->xoffset > 0) {
-               dev_dbg(fbi->device, "x panning not supported\n");
-               return -EINVAL;
-       }
-
-       if (fbi->var.xoffset == var->xoffset &&
-           fbi->var.yoffset == var->yoffset)
-               return 0;       /* No change, do nothing */
-
-       y_bottom = var->yoffset;
-
-       if (!(var->vmode & FB_VMODE_YWRAP))
-               y_bottom += var->yres;
-
-       if (y_bottom > fbi->var.yres_virtual)
-               return -EINVAL;
-
-       mutex_lock(&mx3_fbi->mutex);
-
-       offset = (var->yoffset * var->xres_virtual + var->xoffset) *
-               (var->bits_per_pixel / 8);
-       base = fbi->fix.smem_start + offset;
-
-       dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
-               mx3_fbi->cur_ipu_buf, base);
-
-       /*
-        * We enable the End of Frame interrupt, which will free a tx-descriptor,
-        * which we will need for the next device_prep_slave_sg(). The
-        * IRQ-handler will disable the IRQ again.
-        */
-       init_completion(&mx3_fbi->flip_cmpl);
-       enable_irq(mx3_fbi->idmac_channel->eof_irq);
-
-       ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
-       if (ret <= 0) {
-               mutex_unlock(&mx3_fbi->mutex);
-               dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
-                        "user interrupt" : "timeout");
-               return ret ? : -ETIMEDOUT;
-       }
-
-       mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
-
-       sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
-       sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
-                   virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
-                   offset_in_page(fbi->screen_base + offset));
-
-       txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
-               mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
-       if (!txd) {
-               dev_err(fbi->device,
-                       "Error preparing a DMA transaction descriptor.\n");
-               mutex_unlock(&mx3_fbi->mutex);
-               return -EIO;
-       }
-
-       txd->callback_param     = txd;
-       txd->callback           = mx3fb_dma_done;
-
-       /*
-        * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
-        * should switch to another buffer
-        */
-       cookie = txd->tx_submit(txd);
-       dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
-       if (cookie < 0) {
-               dev_err(fbi->device,
-                       "Error updating SDC buf %d to address=0x%08lX\n",
-                       mx3_fbi->cur_ipu_buf, base);
-               mutex_unlock(&mx3_fbi->mutex);
-               return -EIO;
-       }
-
-       if (mx3_fbi->txd)
-               async_tx_ack(mx3_fbi->txd);
-       mx3_fbi->txd = txd;
-
-       fbi->var.xoffset = var->xoffset;
-       fbi->var.yoffset = var->yoffset;
-
-       if (var->vmode & FB_VMODE_YWRAP)
-               fbi->var.vmode |= FB_VMODE_YWRAP;
-       else
-               fbi->var.vmode &= ~FB_VMODE_YWRAP;
-
-       mutex_unlock(&mx3_fbi->mutex);
-
-       dev_dbg(fbi->device, "Update complete\n");
-
-       return 0;
+	struct mx3fb_info *mx3_fbi = fbi->par;
+	u32 y_bottom;
+	unsigned long base;
+	off_t offset;
+	dma_cookie_t cookie;
+	struct scatterlist *sg = mx3_fbi->sg;
+	struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+	struct dma_async_tx_descriptor *txd;
+	int ret;
+
+	dev_dbg(fbi->device, "%s [%c]\n", __func__,
+		list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+
+	if (var->xoffset > 0) {
+		dev_dbg(fbi->device, "x panning not supported\n");
+		return -EINVAL;
+	}
+
+	if (fbi->var.xoffset == var->xoffset &&
+	    fbi->var.yoffset == var->yoffset)
+		return 0;	/* No change, do nothing */
+
+	y_bottom = var->yoffset;
+
+	if (!(var->vmode & FB_VMODE_YWRAP))
+		y_bottom += var->yres;
+
+	if (y_bottom > fbi->var.yres_virtual)
+		return -EINVAL;
+
+	mutex_lock(&mx3_fbi->mutex);
+
+	offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+		(var->bits_per_pixel / 8);
+	base = fbi->fix.smem_start + offset;
+
+	dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+		mx3_fbi->cur_ipu_buf, base);
+
+	/*
+	 * We enable the End of Frame interrupt, which will free a tx-descriptor,
+	 * which we will need for the next device_prep_slave_sg(). The
+	 * IRQ-handler will disable the IRQ again.
+	 */
+	init_completion(&mx3_fbi->flip_cmpl);
+	enable_irq(mx3_fbi->idmac_channel->eof_irq);
+
+	ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+	if (ret <= 0) {
+		mutex_unlock(&mx3_fbi->mutex);
+		dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+			 "user interrupt" : "timeout");
+		return ret ? : -ETIMEDOUT;
+	}
+
+	mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+
+	sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+	sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+		    virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+		    offset_in_page(fbi->screen_base + offset));
+
+	txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+		mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+	if (!txd) {
+		dev_err(fbi->device,
+			"Error preparing a DMA transaction descriptor.\n");
+		mutex_unlock(&mx3_fbi->mutex);
+		return -EIO;
+	}
+
+	txd->callback_param	= txd;
+	txd->callback		= mx3fb_dma_done;
+
+	/*
+	 * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+	 * should switch to another buffer
+	 */
+	cookie = txd->tx_submit(txd);
+	dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+	if (cookie < 0) {
+		dev_err(fbi->device,
+			"Error updating SDC buf %d to address=0x%08lX\n",
+			mx3_fbi->cur_ipu_buf, base);
+		mutex_unlock(&mx3_fbi->mutex);
+		return -EIO;
+	}
+
+	if (mx3_fbi->txd)
+		async_tx_ack(mx3_fbi->txd);
+	mx3_fbi->txd = txd;
+
+	fbi->var.xoffset = var->xoffset;
+	fbi->var.yoffset = var->yoffset;
+
+	if (var->vmode & FB_VMODE_YWRAP)
+		fbi->var.vmode |= FB_VMODE_YWRAP;
+	else
+		fbi->var.vmode &= ~FB_VMODE_YWRAP;
+
+	mutex_unlock(&mx3_fbi->mutex);
+
+	dev_dbg(fbi->device, "Update complete\n");
+
+	return 0;
 }
 
 /*
@@ -1124,15 +1124,15 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
  * blitting, rectangle filling, copy regions and cursor definition.
  */
 static struct fb_ops mx3fb_ops = {
-       .owner = THIS_MODULE,
-       .fb_set_par = mx3fb_set_par,
-       .fb_check_var = mx3fb_check_var,
-       .fb_setcolreg = mx3fb_setcolreg,
-       .fb_pan_display = mx3fb_pan_display,
-       .fb_fillrect = cfb_fillrect,
-       .fb_copyarea = cfb_copyarea,
-       .fb_imageblit = cfb_imageblit,
-       .fb_blank = mx3fb_blank,
+	.owner = THIS_MODULE,
+	.fb_set_par = mx3fb_set_par,
+	.fb_check_var = mx3fb_check_var,
+	.fb_setcolreg = mx3fb_setcolreg,
+	.fb_pan_display = mx3fb_pan_display,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_blank = mx3fb_blank,
 };
 
 #ifdef CONFIG_PM
@@ -1146,19 +1146,19 @@ static struct fb_ops mx3fb_ops = {
  */
 static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
 {
-       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
-       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+	struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+	struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
 
-       acquire_console_sem();
-       fb_set_suspend(drv_data->fbi, 1);
-       release_console_sem();
+	acquire_console_sem();
+	fb_set_suspend(drv_data->fbi, 1);
+	release_console_sem();
 
-       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
-               sdc_disable_channel(mx3_fbi);
-               sdc_set_brightness(mx3fb, 0);
+	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+		sdc_disable_channel(mx3_fbi);
+		sdc_set_brightness(mx3fb, 0);
 
-       }
-       return 0;
+	}
+	return 0;
 }
 
 /*
@@ -1166,19 +1166,19 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
  */
 static int mx3fb_resume(struct platform_device *pdev)
 {
-       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
-       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+	struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+	struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
 
-       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
-               sdc_enable_channel(mx3_fbi);
-               sdc_set_brightness(mx3fb, drv_data->backlight_level);
-       }
+	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+		sdc_enable_channel(mx3_fbi);
+		sdc_set_brightness(mx3fb, drv_data->backlight_level);
+	}
 
-       acquire_console_sem();
-       fb_set_suspend(drv_data->fbi, 0);
-       release_console_sem();
+	acquire_console_sem();
+	fb_set_suspend(drv_data->fbi, 0);
+	release_console_sem();
 
-       return 0;
+	return 0;
 }
 #else
 #define mx3fb_suspend   NULL
@@ -1191,8 +1191,8 @@ static int mx3fb_resume(struct platform_device *pdev)
 
 /**
  * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
- * @fbi:       framebuffer information pointer
- * @return:    Error code indicating success or failure
+ * @fbi:	framebuffer information pointer
+ * @return:	Error code indicating success or failure
  *
  * This buffer is remapped into a non-cached, non-buffered, memory region to
  * allow palette and pixel writes to occur without flushing the cache. Once this
@@ -1201,349 +1201,349 @@ static int mx3fb_resume(struct platform_device *pdev)
  */
 static int mx3fb_map_video_memory(struct fb_info *fbi)
 {
-       int retval = 0;
-       dma_addr_t addr;
+	int retval = 0;
+	dma_addr_t addr;
 
-       fbi->screen_base = dma_alloc_writecombine(fbi->device,
-                                                 fbi->fix.smem_len,
-                                                 &addr, GFP_DMA);
+	fbi->screen_base = dma_alloc_writecombine(fbi->device,
+						  fbi->fix.smem_len,
+						  &addr, GFP_DMA);
 
-       if (!fbi->screen_base) {
-               dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
-                       fbi->fix.smem_len);
-               retval = -EBUSY;
-               goto err0;
-       }
+	if (!fbi->screen_base) {
+		dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+			fbi->fix.smem_len);
+		retval = -EBUSY;
+		goto err0;
+	}
 
-       fbi->fix.smem_start = addr;
+	fbi->fix.smem_start = addr;
 
-       dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
-               (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+	dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+		(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
 
-       fbi->screen_size = fbi->fix.smem_len;
+	fbi->screen_size = fbi->fix.smem_len;
 
-       /* Clear the screen */
-       memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+	/* Clear the screen */
+	memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
 
-       return 0;
+	return 0;
 
 err0:
-       fbi->fix.smem_len = 0;
-       fbi->fix.smem_start = 0;
-       fbi->screen_base = NULL;
-       return retval;
+	fbi->fix.smem_len = 0;
+	fbi->fix.smem_start = 0;
+	fbi->screen_base = NULL;
+	return retval;
 }
 
 /**
  * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
- * @fbi:       framebuffer information pointer
- * @return:    error code indicating success or failure
+ * @fbi:	framebuffer information pointer
+ * @return:	error code indicating success or failure
  */
 static int mx3fb_unmap_video_memory(struct fb_info *fbi)
 {
-       dma_free_writecombine(fbi->device, fbi->fix.smem_len,
-                             fbi->screen_base, fbi->fix.smem_start);
+	dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+			      fbi->screen_base, fbi->fix.smem_start);
 
-       fbi->screen_base = 0;
-       fbi->fix.smem_start = 0;
-       fbi->fix.smem_len = 0;
-       return 0;
+	fbi->screen_base = 0;
+	fbi->fix.smem_start = 0;
+	fbi->fix.smem_len = 0;
+	return 0;
 }
 
 /**
  * mx3fb_init_fbinfo() - initialize framebuffer information object.
- * @return:    initialized framebuffer structure.
+ * @return:	initialized framebuffer structure.
  */
 static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
 {
-       struct fb_info *fbi;
-       struct mx3fb_info *mx3fbi;
-       int ret;
+	struct fb_info *fbi;
+	struct mx3fb_info *mx3fbi;
+	int ret;
 
-       /* Allocate sufficient memory for the fb structure */
-       fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
-       if (!fbi)
-               return NULL;
+	/* Allocate sufficient memory for the fb structure */
+	fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+	if (!fbi)
+		return NULL;
 
-       mx3fbi                  = fbi->par;
-       mx3fbi->cookie          = -EINVAL;
-       mx3fbi->cur_ipu_buf     = 0;
+	mx3fbi			= fbi->par;
+	mx3fbi->cookie		= -EINVAL;
+	mx3fbi->cur_ipu_buf	= 0;
 
-       fbi->var.activate       = FB_ACTIVATE_NOW;
+	fbi->var.activate	= FB_ACTIVATE_NOW;
 
-       fbi->fbops              = ops;
-       fbi->flags              = FBINFO_FLAG_DEFAULT;
-       fbi->pseudo_palette     = mx3fbi->pseudo_palette;
+	fbi->fbops		= ops;
+	fbi->flags		= FBINFO_FLAG_DEFAULT;
+	fbi->pseudo_palette	= mx3fbi->pseudo_palette;
 
-       mutex_init(&mx3fbi->mutex);
+	mutex_init(&mx3fbi->mutex);
 
-       /* Allocate colormap */
-       ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
-       if (ret < 0) {
-               framebuffer_release(fbi);
-               return NULL;
-       }
+	/* Allocate colormap */
+	ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+	if (ret < 0) {
+		framebuffer_release(fbi);
+		return NULL;
+	}
 
-       return fbi;
+	return fbi;
 }
 
 static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 {
-       struct device *dev = mx3fb->dev;
-       struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
-       const char *name = mx3fb_pdata->name;
-       unsigned int irq;
-       struct fb_info *fbi;
-       struct mx3fb_info *mx3fbi;
-       const struct fb_videomode *mode;
-       int ret, num_modes;
+	struct device *dev = mx3fb->dev;
+	struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+	const char *name = mx3fb_pdata->name;
+	unsigned int irq;
+	struct fb_info *fbi;
+	struct mx3fb_info *mx3fbi;
+	const struct fb_videomode *mode;
+	int ret, num_modes;
 
-       ichan->client = mx3fb;
-       irq = ichan->eof_irq;
+	ichan->client = mx3fb;
+	irq = ichan->eof_irq;
 
-       if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
-               return -EINVAL;
+	if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+		return -EINVAL;
 
-       fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
-       if (!fbi)
-               return -ENOMEM;
+	fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+	if (!fbi)
+		return -ENOMEM;
 
-       if (!fb_mode)
-               fb_mode = name;
+	if (!fb_mode)
+		fb_mode = name;
 
-       if (!fb_mode) {
-               ret = -EINVAL;
-               goto emode;
-       }
+	if (!fb_mode) {
+		ret = -EINVAL;
+		goto emode;
+	}
 
-       if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
-               mode = mx3fb_pdata->mode;
-               num_modes = mx3fb_pdata->num_modes;
-       } else {
-               mode = mx3fb_modedb;
-               num_modes = ARRAY_SIZE(mx3fb_modedb);
-       }
+	if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+		mode = mx3fb_pdata->mode;
+		num_modes = mx3fb_pdata->num_modes;
+	} else {
+		mode = mx3fb_modedb;
+		num_modes = ARRAY_SIZE(mx3fb_modedb);
+	}
 
-       if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
-                         num_modes, NULL, default_bpp)) {
-               ret = -EBUSY;
-               goto emode;
-       }
+	if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+			  num_modes, NULL, default_bpp)) {
+		ret = -EBUSY;
+		goto emode;
+	}
 
-       fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+	fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
 
-       /* Default Y virtual size is 2x panel size */
-       fbi->var.yres_virtual = fbi->var.yres * 2;
+	/* Default Y virtual size is 2x panel size */
+	fbi->var.yres_virtual = fbi->var.yres * 2;
 
-       mx3fb->fbi = fbi;
+	mx3fb->fbi = fbi;
 
-       /* set Display Interface clock period */
-       mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
-       /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+	/* set Display Interface clock period */
+	mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+	/* Might need to trigger HSP clock change - see 44.3.3.8.5 */
 
-       sdc_set_brightness(mx3fb, 255);
-       sdc_set_global_alpha(mx3fb, true, 0xFF);
-       sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+	sdc_set_brightness(mx3fb, 255);
+	sdc_set_global_alpha(mx3fb, true, 0xFF);
+	sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
 
-       mx3fbi                  = fbi->par;
-       mx3fbi->idmac_channel   = ichan;
-       mx3fbi->ipu_ch          = ichan->dma_chan.chan_id;
-       mx3fbi->mx3fb           = mx3fb;
-       mx3fbi->blank           = FB_BLANK_NORMAL;
+	mx3fbi			= fbi->par;
+	mx3fbi->idmac_channel	= ichan;
+	mx3fbi->ipu_ch		= ichan->dma_chan.chan_id;
+	mx3fbi->mx3fb		= mx3fb;
+	mx3fbi->blank		= FB_BLANK_NORMAL;
 
-       init_completion(&mx3fbi->flip_cmpl);
-       disable_irq(ichan->eof_irq);
-       dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
-       ret = mx3fb_set_par(fbi);
-       if (ret < 0)
-               goto esetpar;
+	init_completion(&mx3fbi->flip_cmpl);
+	disable_irq(ichan->eof_irq);
+	dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+	ret = mx3fb_set_par(fbi);
+	if (ret < 0)
+		goto esetpar;
 
-       mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+	mx3fb_blank(FB_BLANK_UNBLANK, fbi);
 
-       dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+	dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
 
-       ret = register_framebuffer(fbi);
-       if (ret < 0)
-               goto erfb;
+	ret = register_framebuffer(fbi);
+	if (ret < 0)
+		goto erfb;
 
-       return 0;
+	return 0;
 
 erfb:
 esetpar:
 emode:
-       fb_dealloc_cmap(&fbi->cmap);
-       framebuffer_release(fbi);
+	fb_dealloc_cmap(&fbi->cmap);
+	framebuffer_release(fbi);
 
-       return ret;
+	return ret;
 }
 
 static bool chan_filter(struct dma_chan *chan, void *arg)
 {
-       struct dma_chan_request *rq = arg;
-       struct device *dev;
-       struct mx3fb_platform_data *mx3fb_pdata;
+	struct dma_chan_request *rq = arg;
+	struct device *dev;
+	struct mx3fb_platform_data *mx3fb_pdata;
 
-       if (!rq)
-               return false;
+	if (!rq)
+		return false;
 
-       dev = rq->mx3fb->dev;
-       mx3fb_pdata = dev->platform_data;
+	dev = rq->mx3fb->dev;
+	mx3fb_pdata = dev->platform_data;
 
-       return rq->id == chan->chan_id &&
-               mx3fb_pdata->dma_dev == chan->device->dev;
+	return rq->id == chan->chan_id &&
+		mx3fb_pdata->dma_dev == chan->device->dev;
 }
 
 static void release_fbi(struct fb_info *fbi)
 {
-       mx3fb_unmap_video_memory(fbi);
+	mx3fb_unmap_video_memory(fbi);
 
-       fb_dealloc_cmap(&fbi->cmap);
+	fb_dealloc_cmap(&fbi->cmap);
 
-       unregister_framebuffer(fbi);
-       framebuffer_release(fbi);
+	unregister_framebuffer(fbi);
+	framebuffer_release(fbi);
 }
 
 static int mx3fb_probe(struct platform_device *pdev)
 {
-       struct device *dev = &pdev->dev;
-       int ret;
-       struct resource *sdc_reg;
-       struct mx3fb_data *mx3fb;
-       dma_cap_mask_t mask;
-       struct dma_chan *chan;
-       struct dma_chan_request rq;
-
-       /*
-        * Display Interface (DI) and Synchronous Display Controller (SDC)
-        * registers
-        */
-       sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!sdc_reg)
-               return -EINVAL;
-
-       mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
-       if (!mx3fb)
-               return -ENOMEM;
-
-       spin_lock_init(&mx3fb->lock);
-
-       mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
-       if (!mx3fb->reg_base) {
-               ret = -ENOMEM;
-               goto eremap;
-       }
-
-       pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
-                mx3fb->reg_base);
-
-       /* IDMAC interface */
-       dmaengine_get();
-
-       mx3fb->dev = dev;
-       platform_set_drvdata(pdev, mx3fb);
-
-       rq.mx3fb = mx3fb;
-
-       dma_cap_zero(mask);
-       dma_cap_set(DMA_SLAVE, mask);
-       dma_cap_set(DMA_PRIVATE, mask);
-       rq.id = IDMAC_SDC_0;
-       chan = dma_request_channel(mask, chan_filter, &rq);
-       if (!chan) {
-               ret = -EBUSY;
-               goto ersdc0;
-       }
-
-       ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
-       if (ret < 0)
-               goto eisdc0;
-
-       mx3fb->backlight_level = 255;
-
-       return 0;
+	struct device *dev = &pdev->dev;
+	int ret;
+	struct resource *sdc_reg;
+	struct mx3fb_data *mx3fb;
+	dma_cap_mask_t mask;
+	struct dma_chan *chan;
+	struct dma_chan_request rq;
+
+	/*
+	 * Display Interface (DI) and Synchronous Display Controller (SDC)
+	 * registers
+	 */
+	sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!sdc_reg)
+		return -EINVAL;
+
+	mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+	if (!mx3fb)
+		return -ENOMEM;
+
+	spin_lock_init(&mx3fb->lock);
+
+	mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+	if (!mx3fb->reg_base) {
+		ret = -ENOMEM;
+		goto eremap;
+	}
+
+	pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+		 mx3fb->reg_base);
+
+	/* IDMAC interface */
+	dmaengine_get();
+
+	mx3fb->dev = dev;
+	platform_set_drvdata(pdev, mx3fb);
+
+	rq.mx3fb = mx3fb;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_cap_set(DMA_PRIVATE, mask);
+	rq.id = IDMAC_SDC_0;
+	chan = dma_request_channel(mask, chan_filter, &rq);
+	if (!chan) {
+		ret = -EBUSY;
+		goto ersdc0;
+	}
+
+	ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+	if (ret < 0)
+		goto eisdc0;
+
+	mx3fb->backlight_level = 255;
+
+	return 0;
 
 eisdc0:
-       dma_release_channel(chan);
+	dma_release_channel(chan);
 ersdc0:
-       dmaengine_put();
-       iounmap(mx3fb->reg_base);
+	dmaengine_put();
+	iounmap(mx3fb->reg_base);
 eremap:
-       kfree(mx3fb);
-       dev_err(dev, "mx3fb: failed to register fb\n");
-       return ret;
+	kfree(mx3fb);
+	dev_err(dev, "mx3fb: failed to register fb\n");
+	return ret;
 }
 
 static int mx3fb_remove(struct platform_device *dev)
 {
-       struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
-       struct fb_info *fbi = mx3fb->fbi;
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       struct dma_chan *chan;
+	struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+	struct fb_info *fbi = mx3fb->fbi;
+	struct mx3fb_info *mx3_fbi = fbi->par;
+	struct dma_chan *chan;
 
-       chan = &mx3_fbi->idmac_channel->dma_chan;
-       release_fbi(fbi);
+	chan = &mx3_fbi->idmac_channel->dma_chan;
+	release_fbi(fbi);
 
-       dma_release_channel(chan);
-       dmaengine_put();
+	dma_release_channel(chan);
+	dmaengine_put();
 
-       iounmap(mx3fb->reg_base);
-       kfree(mx3fb);
-       return 0;
+	iounmap(mx3fb->reg_base);
+	kfree(mx3fb);
+	return 0;
 }
 
 static struct platform_driver mx3fb_driver = {
-       .driver = {
-                  .name = MX3FB_NAME,
-       },
-       .probe = mx3fb_probe,
-       .remove = mx3fb_remove,
-       .suspend = mx3fb_suspend,
-       .resume = mx3fb_resume,
+	.driver = {
+		   .name = MX3FB_NAME,
+	},
+	.probe = mx3fb_probe,
+	.remove = mx3fb_remove,
+	.suspend = mx3fb_suspend,
+	.resume = mx3fb_resume,
 };
 
 /*
  * Parse user specified options (`video=mx3fb:')
  * example:
- *     video=mx3fb:bpp=16
+ * 	video=mx3fb:bpp=16
  */
 static int mx3fb_setup(void)
 {
 #ifndef MODULE
-       char *opt, *options = NULL;
-
-       if (fb_get_options("mx3fb", &options))
-               return -ENODEV;
-
-       if (!options || !*options)
-               return 0;
-
-       while ((opt = strsep(&options, ",")) != NULL) {
-               if (!*opt)
-                       continue;
-               if (!strncmp(opt, "bpp=", 4))
-                       default_bpp = simple_strtoul(opt + 4, NULL, 0);
-               else
-                       fb_mode = opt;
-       }
+	char *opt, *options = NULL;
+
+	if (fb_get_options("mx3fb", &options))
+		return -ENODEV;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((opt = strsep(&options, ",")) != NULL) {
+		if (!*opt)
+			continue;
+		if (!strncmp(opt, "bpp=", 4))
+			default_bpp = simple_strtoul(opt + 4, NULL, 0);
+		else
+			fb_mode = opt;
+	}
 #endif
 
-       return 0;
+	return 0;
 }
 
 static int __init mx3fb_init(void)
 {
-       int ret = mx3fb_setup();
+	int ret = mx3fb_setup();
 
-       if (ret < 0)
-               return ret;
+	if (ret < 0)
+		return ret;
 
-       ret = platform_driver_register(&mx3fb_driver);
-       return ret;
+	ret = platform_driver_register(&mx3fb_driver);
+	return ret;
 }
 
 static void __exit mx3fb_exit(void)
 {
-       platform_driver_unregister(&mx3fb_driver);
+	platform_driver_unregister(&mx3fb_driver);
 }
 
 module_init(mx3fb_init);
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 2552b9f325e..84f63205c46 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -59,7 +59,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <mach/pxa-regs.h>
 #include <mach/bitfield.h>
 #include <mach/pxafb.h>
 
@@ -883,10 +882,21 @@ static void __devinit init_pxafb_overlay(struct pxafb_info *fbi,
 	init_completion(&ofb->branch_done);
 }
 
+static inline int pxafb_overlay_supported(void)
+{
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx())
+		return 1;
+
+	return 0;
+}
+
 static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
 {
 	int i, ret;
 
+	if (!pxafb_overlay_supported())
+		return 0;
+
 	for (i = 0; i < 2; i++) {
 		init_pxafb_overlay(fbi, &fbi->overlay[i], i);
 		ret = register_framebuffer(&fbi->overlay[i].fb);
@@ -909,6 +919,9 @@ static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
 {
 	int i;
 
+	if (!pxafb_overlay_supported())
+		return;
+
 	for (i = 0; i < 2; i++)
 		unregister_framebuffer(&fbi->overlay[i].fb);
 }
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 79cf0b1976a..b0b4513ba53 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1017,6 +1017,10 @@ static int s3c2410fb_resume(struct platform_device *dev)
 
 	s3c2410fb_init_registers(fbinfo);
 
+	/* re-activate our display after resume */
+	s3c2410fb_activate_var(fbinfo);
+	s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);
+
 	return 0;
 }
 
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 076f946fa0f..fad58cf9ef7 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -176,9 +176,9 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/mach-types.h>
 #include <mach/assabet.h>
 #include <mach/shannon.h>
@@ -251,22 +251,6 @@ static struct sa1100fb_mach_info pal_info __initdata = {
 #endif
 #endif
 
-#ifdef CONFIG_SA1100_H3800
-static struct sa1100fb_mach_info h3800_info __initdata = {
-	.pixclock	= 174757, 	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 3,		.vsync_len	= 3,
-	.left_margin	= 12,		.upper_margin	= 10,
-	.right_margin	= 17,		.lower_margin	= 1,
-
-	.cmap_static	= 1,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
 #ifdef CONFIG_SA1100_H3600
 static struct sa1100fb_mach_info h3600_info __initdata = {
 	.pixclock	= 174757, 	.bpp		= 16,
@@ -432,11 +416,6 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
 		fbi->rgb[RGB_16] = &h3600_rgb_16;
 	}
 #endif
-#ifdef CONFIG_SA1100_H3800
-	if (machine_is_h3800()) {
-		inf = &h3800_info;
-	}
-#endif
 #ifdef CONFIG_SA1100_COLLIE
 	if (machine_is_collie()) {
 		inf = &collie_info;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 0e2b8fd24df..2c5d069e5f0 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -446,7 +446,6 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 {
 	struct sh_mobile_lcdc_chan *ch;
 	struct sh_mobile_lcdc_board_cfg	*board_cfg;
-	unsigned long tmp;
 	int k;
 
 	/* tell the board code to disable the panel */
@@ -456,9 +455,8 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 		if (board_cfg->display_off)
 			board_cfg->display_off(board_cfg->board_data);
 
-		/* cleanup deferred io if SYS bus */
-		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
-		if (ch->ldmt1r_value & (1 << 12) && tmp) {
+		/* cleanup deferred io if enabled */
+		if (ch->info.fbdefio) {
 			fb_deferred_io_cleanup(&ch->info);
 			ch->info.fbdefio = NULL;
 		}
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index b9d74d0b353..65244c02551 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -116,7 +116,7 @@ static int __init mxc_w1_probe(struct platform_device *pdev)
 	if (!mdev)
 		return -ENOMEM;
 
-	mdev->clk = clk_get(&pdev->dev, "owire_clk");
+	mdev->clk = clk_get(&pdev->dev, "owire");
 	if (!mdev->clk) {
 		err = -ENODEV;
 		goto failed_clk;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index c973889110c..a7e3b706b9d 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -590,8 +590,8 @@ static int __init omap_hdq_probe(struct platform_device *pdev)
 	}
 
 	/* get interface & functional clock objects */
-	hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick");
-	hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck");
+	hdq_data->hdq_ick = clk_get(&pdev->dev, "ick");
+	hdq_data->hdq_fck = clk_get(&pdev->dev, "fck");
 
 	if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) {
 		dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n");
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 9e1138a75e8..a411702413d 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -39,7 +39,7 @@ static u8 w1_gpio_read_bit(void *data)
 {
 	struct w1_gpio_platform_data *pdata = data;
 
-	return gpio_get_value(pdata->pin);
+	return gpio_get_value(pdata->pin) ? 1 : 0;
 }
 
 static int __init w1_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index f0c2b7a1a17..734d9806a87 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -269,7 +269,7 @@ static int __devinit gef_wdt_probe(struct of_device *dev,
 	bus_clk = 133; /* in MHz */
 
 	freq = fsl_get_sys_freq();
-	if (freq > 0)
+	if (freq != -1)
 		bus_clk = freq;
 
 	/* Map devices registers into memory */
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 0b798fdaa37..74c92d38411 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -21,6 +21,7 @@
 #include <linux/watchdog.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <mach/timex.h>
 #include <mach/regs-timer.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 2f2ce7429f5..aa5ad6e33f0 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -60,9 +60,8 @@ struct omap_wdt_dev {
 	void __iomem    *base;          /* physical */
 	struct device   *dev;
 	int             omap_wdt_users;
-	struct clk      *armwdt_ck;
-	struct clk      *mpu_wdt_ick;
-	struct clk      *mpu_wdt_fck;
+	struct clk      *ick;
+	struct clk      *fck;
 	struct resource *mem;
 	struct miscdevice omap_wdt_miscdev;
 };
@@ -146,13 +145,8 @@ static int omap_wdt_open(struct inode *inode, struct file *file)
 	if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users)))
 		return -EBUSY;
 
-	if (cpu_is_omap16xx())
-		clk_enable(wdev->armwdt_ck);	/* Enable the clock */
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		clk_enable(wdev->mpu_wdt_ick);    /* Enable the interface clock */
-		clk_enable(wdev->mpu_wdt_fck);    /* Enable the functional clock */
-	}
+	clk_enable(wdev->ick);    /* Enable the interface clock */
+	clk_enable(wdev->fck);    /* Enable the functional clock */
 
 	/* initialize prescaler */
 	while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
@@ -181,13 +175,8 @@ static int omap_wdt_release(struct inode *inode, struct file *file)
 
 	omap_wdt_disable(wdev);
 
-	if (cpu_is_omap16xx())
-		clk_disable(wdev->armwdt_ck);	/* Disable the clock */
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		clk_disable(wdev->mpu_wdt_ick);	/* Disable the clock */
-		clk_disable(wdev->mpu_wdt_fck);	/* Disable the clock */
-	}
+	clk_disable(wdev->ick);
+	clk_disable(wdev->fck);
 #else
 	printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n");
 #endif
@@ -303,44 +292,19 @@ static int __init omap_wdt_probe(struct platform_device *pdev)
 	wdev->omap_wdt_users = 0;
 	wdev->mem = mem;
 
-	if (cpu_is_omap16xx()) {
-		wdev->armwdt_ck = clk_get(&pdev->dev, "armwdt_ck");
-		if (IS_ERR(wdev->armwdt_ck)) {
-			ret = PTR_ERR(wdev->armwdt_ck);
-			wdev->armwdt_ck = NULL;
-			goto err_clk;
-		}
+	wdev->ick = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(wdev->ick)) {
+		ret = PTR_ERR(wdev->ick);
+		wdev->ick = NULL;
+		goto err_clk;
 	}
-
-	if (cpu_is_omap24xx()) {
-		wdev->mpu_wdt_ick = clk_get(&pdev->dev, "mpu_wdt_ick");
-		if (IS_ERR(wdev->mpu_wdt_ick)) {
-			ret = PTR_ERR(wdev->mpu_wdt_ick);
-			wdev->mpu_wdt_ick = NULL;
-			goto err_clk;
-		}
-		wdev->mpu_wdt_fck = clk_get(&pdev->dev, "mpu_wdt_fck");
-		if (IS_ERR(wdev->mpu_wdt_fck)) {
-			ret = PTR_ERR(wdev->mpu_wdt_fck);
-			wdev->mpu_wdt_fck = NULL;
-			goto err_clk;
-		}
+	wdev->fck = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(wdev->fck)) {
+		ret = PTR_ERR(wdev->fck);
+		wdev->fck = NULL;
+		goto err_clk;
 	}
 
-	if (cpu_is_omap34xx()) {
-		wdev->mpu_wdt_ick = clk_get(&pdev->dev, "wdt2_ick");
-		if (IS_ERR(wdev->mpu_wdt_ick)) {
-			ret = PTR_ERR(wdev->mpu_wdt_ick);
-			wdev->mpu_wdt_ick = NULL;
-			goto err_clk;
-		}
-		wdev->mpu_wdt_fck = clk_get(&pdev->dev, "wdt2_fck");
-		if (IS_ERR(wdev->mpu_wdt_fck)) {
-			ret = PTR_ERR(wdev->mpu_wdt_fck);
-			wdev->mpu_wdt_fck = NULL;
-			goto err_clk;
-		}
-	}
 	wdev->base = ioremap(res->start, res->end - res->start + 1);
 	if (!wdev->base) {
 		ret = -ENOMEM;
@@ -380,12 +344,10 @@ err_ioremap:
 	wdev->base = NULL;
 
 err_clk:
-	if (wdev->armwdt_ck)
-		clk_put(wdev->armwdt_ck);
-	if (wdev->mpu_wdt_ick)
-		clk_put(wdev->mpu_wdt_ick);
-	if (wdev->mpu_wdt_fck)
-		clk_put(wdev->mpu_wdt_fck);
+	if (wdev->ick)
+		clk_put(wdev->ick);
+	if (wdev->fck)
+		clk_put(wdev->fck);
 	kfree(wdev);
 
 err_kzalloc:
@@ -417,20 +379,8 @@ static int omap_wdt_remove(struct platform_device *pdev)
 	release_mem_region(res->start, res->end - res->start + 1);
 	platform_set_drvdata(pdev, NULL);
 
-	if (wdev->armwdt_ck) {
-		clk_put(wdev->armwdt_ck);
-		wdev->armwdt_ck = NULL;
-	}
-
-	if (wdev->mpu_wdt_ick) {
-		clk_put(wdev->mpu_wdt_ick);
-		wdev->mpu_wdt_ick = NULL;
-	}
-
-	if (wdev->mpu_wdt_fck) {
-		clk_put(wdev->mpu_wdt_fck);
-		wdev->mpu_wdt_fck = NULL;
-	}
+	clk_put(wdev->ick);
+	clk_put(wdev->fck);
 	iounmap(wdev->base);
 
 	kfree(wdev);
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c
index 14a339f58b6..b64ae1a1783 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion5x_wdt.c
@@ -29,6 +29,7 @@
 #define  WDT_EN			0x0010
 #define WDT_VAL			(TIMER_VIRT_BASE + 0x0024)
 
+#define ORION5X_TCLK		166666667
 #define WDT_MAX_DURATION	(0xffffffff / ORION5X_TCLK)
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index 57027f4653c..f3553fa40b1 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -34,104 +34,89 @@
 #include <asm/time.h>
 #include <asm/mach-rc32434/integ.h>
 
-#define MAX_TIMEOUT			20
-#define RC32434_WDT_INTERVAL		(15 * HZ)
-
-#define VERSION "0.2"
+#define VERSION "0.4"
 
 static struct {
-	struct completion stop;
-	int running;
-	struct timer_list timer;
-	int queue;
-	int default_ticks;
 	unsigned long inuse;
 } rc32434_wdt_device;
 
 static struct integ __iomem *wdt_reg;
-static int ticks = 100 * HZ;
 
 static int expect_close;
-static int timeout;
+
+/* Board internal clock speed in Hz,
+ * the watchdog timer ticks at. */
+extern unsigned int idt_cpu_freq;
+
+/* translate wtcompare value to seconds and vice versa */
+#define WTCOMP2SEC(x)	(x / idt_cpu_freq)
+#define SEC2WTCOMP(x)	(x * idt_cpu_freq)
+
+/* Use a default timeout of 20s. This should be
+ * safe for CPU clock speeds up to 400MHz, as
+ * ((2 ^ 32) - 1) / (400MHz / 2) = 21s.  */
+#define WATCHDOG_TIMEOUT 20
+
+static int timeout = WATCHDOG_TIMEOUT;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+/* apply or and nand masks to data read from addr and write back */
+#define SET_BITS(addr, or, nand) \
+	writel((readl(&addr) | or) & ~nand, &addr)
 
 static void rc32434_wdt_start(void)
 {
-	u32 val;
-
-	if (!rc32434_wdt_device.inuse) {
-		writel(0, &wdt_reg->wtcount);
+	u32 or, nand;
 
-		val = RC32434_ERR_WRE;
-		writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+	/* zero the counter before enabling */
+	writel(0, &wdt_reg->wtcount);
 
-		val = RC32434_WTC_EN;
-		writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
-	}
-	rc32434_wdt_device.running++;
-}
+	/* don't generate a non-maskable interrupt,
+	 * do a warm reset instead */
+	nand = 1 << RC32434_ERR_WNE;
+	or = 1 << RC32434_ERR_WRE;
 
-static void rc32434_wdt_stop(void)
-{
-	u32 val;
+	/* reset the ERRCS timeout bit in case it's set */
+	nand |= 1 << RC32434_ERR_WTO;
 
-	if (rc32434_wdt_device.running) {
+	SET_BITS(wdt_reg->errcs, or, nand);
 
-		val = ~RC32434_WTC_EN;
-		writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+	/* reset WTC timeout bit and enable WDT */
+	nand = 1 << RC32434_WTC_TO;
+	or = 1 << RC32434_WTC_EN;
 
-		val = ~RC32434_ERR_WRE;
-		writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
+	SET_BITS(wdt_reg->wtc, or, nand);
+}
 
-		rc32434_wdt_device.running = 0;
-	}
+static void rc32434_wdt_stop(void)
+{
+	/* Disable WDT */
+	SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
 }
 
-static void rc32434_wdt_set(int new_timeout)
+static int rc32434_wdt_set(int new_timeout)
 {
-	u32 cmp = new_timeout * HZ;
-	u32 state, val;
+	int max_to = WTCOMP2SEC((u32)-1);
 
+	if (new_timeout < 0 || new_timeout > max_to) {
+		printk(KERN_ERR KBUILD_MODNAME
+			": timeout value must be between 0 and %d",
+			max_to);
+		return -EINVAL;
+	}
 	timeout = new_timeout;
-	/*
-	 * store and disable WTC
-	 */
-	state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
-	val = ~RC32434_WTC_EN;
-	writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
-
-	writel(0, &wdt_reg->wtcount);
-	writel(cmp, &wdt_reg->wtcompare);
-
-	/*
-	 * restore WTC
-	 */
-
-	writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
-}
+	writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
 
-static void rc32434_wdt_reset(void)
-{
-	ticks = rc32434_wdt_device.default_ticks;
+	return 0;
 }
 
-static void rc32434_wdt_update(unsigned long unused)
+static void rc32434_wdt_ping(void)
 {
-	if (rc32434_wdt_device.running)
-		ticks--;
-
 	writel(0, &wdt_reg->wtcount);
-
-	if (rc32434_wdt_device.queue && ticks)
-		mod_timer(&rc32434_wdt_device.timer,
-			jiffies + RC32434_WDT_INTERVAL);
-	else
-		complete(&rc32434_wdt_device.stop);
 }
 
 static int rc32434_wdt_open(struct inode *inode, struct file *file)
@@ -142,19 +127,23 @@ static int rc32434_wdt_open(struct inode *inode, struct file *file)
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
+	rc32434_wdt_start();
+	rc32434_wdt_ping();
+
 	return nonseekable_open(inode, file);
 }
 
 static int rc32434_wdt_release(struct inode *inode, struct file *file)
 {
-	if (expect_close && nowayout == 0) {
+	if (expect_close == 42) {
 		rc32434_wdt_stop();
 		printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
 		module_put(THIS_MODULE);
-	} else
+	} else {
 		printk(KERN_CRIT KBUILD_MODNAME
 			": device closed unexpectedly. WDT will not stop !\n");
-
+		rc32434_wdt_ping();
+	}
 	clear_bit(0, &rc32434_wdt_device.inuse);
 	return 0;
 }
@@ -174,10 +163,10 @@ static ssize_t rc32434_wdt_write(struct file *file, const char *data,
 				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
-					expect_close = 1;
+					expect_close = 42;
 			}
 		}
-		rc32434_wdt_update(0);
+		rc32434_wdt_ping();
 		return len;
 	}
 	return 0;
@@ -197,11 +186,11 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 	};
 	switch (cmd) {
 	case WDIOC_KEEPALIVE:
-		rc32434_wdt_reset();
+		rc32434_wdt_ping();
 		break;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		value = readl(&wdt_reg->wtcount);
+		value = 0;
 		if (copy_to_user(argp, &value, sizeof(int)))
 			return -EFAULT;
 		break;
@@ -218,6 +207,7 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 			break;
 		case WDIOS_DISABLECARD:
 			rc32434_wdt_stop();
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -225,11 +215,9 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 	case WDIOC_SETTIMEOUT:
 		if (copy_from_user(&new_timeout, argp, sizeof(int)))
 			return -EFAULT;
-		if (new_timeout < 1)
+		if (rc32434_wdt_set(new_timeout))
 			return -EINVAL;
-		if (new_timeout > MAX_TIMEOUT)
-			return -EINVAL;
-		rc32434_wdt_set(new_timeout);
+		/* Fall through */
 	case WDIOC_GETTIMEOUT:
 		return copy_to_user(argp, &timeout, sizeof(int));
 	default:
@@ -254,15 +242,15 @@ static struct miscdevice rc32434_wdt_miscdev = {
 	.fops	= &rc32434_wdt_fops,
 };
 
-static char banner[] = KERN_INFO KBUILD_MODNAME
+static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME
 		": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
 
-static int rc32434_wdt_probe(struct platform_device *pdev)
+static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct resource *r;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
 	if (!r) {
 		printk(KERN_ERR KBUILD_MODNAME
 			"failed to retrieve resources\n");
@@ -277,24 +265,12 @@ static int rc32434_wdt_probe(struct platform_device *pdev)
 	}
 
 	ret = misc_register(&rc32434_wdt_miscdev);
-
 	if (ret < 0) {
 		printk(KERN_ERR KBUILD_MODNAME
 			"failed to register watchdog device\n");
 		goto unmap;
 	}
 
-	init_completion(&rc32434_wdt_device.stop);
-	rc32434_wdt_device.queue = 0;
-
-	clear_bit(0, &rc32434_wdt_device.inuse);
-
-	setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
-
-	rc32434_wdt_device.default_ticks = ticks;
-
-	rc32434_wdt_start();
-
 	printk(banner, timeout);
 
 	return 0;
@@ -304,23 +280,17 @@ unmap:
 	return ret;
 }
 
-static int rc32434_wdt_remove(struct platform_device *pdev)
+static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
 {
-	if (rc32434_wdt_device.queue) {
-		rc32434_wdt_device.queue = 0;
-		wait_for_completion(&rc32434_wdt_device.stop);
-	}
 	misc_deregister(&rc32434_wdt_miscdev);
-
 	iounmap(wdt_reg);
-
 	return 0;
 }
 
 static struct platform_driver rc32434_wdt = {
 	.probe	= rc32434_wdt_probe,
-	.remove = rc32434_wdt_remove,
-	.driver = {
+	.remove	= __devexit_p(rc32434_wdt_remove),
+	.driver	= {
 		.name = "rc32434_wdt",
 	}
 };
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index e19b4579471..4b84f296d30 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -30,7 +30,7 @@
 #include <linux/timex.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
 #endif
 
 #include <mach/reset.h>
diff --git a/fs/aio.c b/fs/aio.c
index 8fa77e23394..76da1253795 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -443,7 +443,7 @@ static struct kiocb *__aio_get_req(struct kioctx *ctx)
 	req->private = NULL;
 	req->ki_iovec = NULL;
 	INIT_LIST_HEAD(&req->ki_run_list);
-	req->ki_eventfd = ERR_PTR(-EINVAL);
+	req->ki_eventfd = NULL;
 
 	/* Check if the completion queue has enough free space to
 	 * accept an event from this io.
@@ -485,8 +485,6 @@ static inline void really_put_req(struct kioctx *ctx, struct kiocb *req)
 {
 	assert_spin_locked(&ctx->ctx_lock);
 
-	if (!IS_ERR(req->ki_eventfd))
-		fput(req->ki_eventfd);
 	if (req->ki_dtor)
 		req->ki_dtor(req);
 	if (req->ki_iovec != &req->ki_inline_vec)
@@ -508,8 +506,11 @@ static void aio_fput_routine(struct work_struct *data)
 		list_del(&req->ki_list);
 		spin_unlock_irq(&fput_lock);
 
-		/* Complete the fput */
-		__fput(req->ki_filp);
+		/* Complete the fput(s) */
+		if (req->ki_filp != NULL)
+			__fput(req->ki_filp);
+		if (req->ki_eventfd != NULL)
+			__fput(req->ki_eventfd);
 
 		/* Link the iocb into the context's free list */
 		spin_lock_irq(&ctx->ctx_lock);
@@ -527,12 +528,14 @@ static void aio_fput_routine(struct work_struct *data)
  */
 static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 {
+	int schedule_putreq = 0;
+
 	dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
 		req, atomic_long_read(&req->ki_filp->f_count));
 
 	assert_spin_locked(&ctx->ctx_lock);
 
-	req->ki_users --;
+	req->ki_users--;
 	BUG_ON(req->ki_users < 0);
 	if (likely(req->ki_users))
 		return 0;
@@ -540,10 +543,23 @@ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 	req->ki_cancel = NULL;
 	req->ki_retry = NULL;
 
-	/* Must be done under the lock to serialise against cancellation.
-	 * Call this aio_fput as it duplicates fput via the fput_work.
+	/*
+	 * Try to optimize the aio and eventfd file* puts, by avoiding to
+	 * schedule work in case it is not __fput() time. In normal cases,
+	 * we would not be holding the last reference to the file*, so
+	 * this function will be executed w/out any aio kthread wakeup.
 	 */
-	if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
+	if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count)))
+		schedule_putreq++;
+	else
+		req->ki_filp = NULL;
+	if (req->ki_eventfd != NULL) {
+		if (unlikely(atomic_long_dec_and_test(&req->ki_eventfd->f_count)))
+			schedule_putreq++;
+		else
+			req->ki_eventfd = NULL;
+	}
+	if (unlikely(schedule_putreq)) {
 		get_ioctx(ctx);
 		spin_lock(&fput_lock);
 		list_add(&req->ki_list, &fput_head);
@@ -571,7 +587,7 @@ int aio_put_req(struct kiocb *req)
 static struct kioctx *lookup_ioctx(unsigned long ctx_id)
 {
 	struct mm_struct *mm = current->mm;
-	struct kioctx *ctx = NULL;
+	struct kioctx *ctx, *ret = NULL;
 	struct hlist_node *n;
 
 	rcu_read_lock();
@@ -579,12 +595,13 @@ static struct kioctx *lookup_ioctx(unsigned long ctx_id)
 	hlist_for_each_entry_rcu(ctx, n, &mm->ioctx_list, list) {
 		if (ctx->user_id == ctx_id && !ctx->dead) {
 			get_ioctx(ctx);
+			ret = ctx;
 			break;
 		}
 	}
 
 	rcu_read_unlock();
-	return ctx;
+	return ret;
 }
 
 /*
@@ -1009,7 +1026,7 @@ int aio_complete(struct kiocb *iocb, long res, long res2)
 	 * eventfd. The eventfd_signal() function is safe to be called
 	 * from IRQ context.
 	 */
-	if (!IS_ERR(iocb->ki_eventfd))
+	if (iocb->ki_eventfd != NULL)
 		eventfd_signal(iocb->ki_eventfd, 1);
 
 put_rq:
@@ -1608,6 +1625,7 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
 		req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd);
 		if (IS_ERR(req->ki_eventfd)) {
 			ret = PTR_ERR(req->ki_eventfd);
+			req->ki_eventfd = NULL;
 			goto out_put_req;
 		}
 	}
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 549b0144da1..fe2b1aa2464 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -685,19 +685,20 @@ EXPORT_SYMBOL(bio_integrity_split);
  * bio_integrity_clone - Callback for cloning bios with integrity metadata
  * @bio:	New bio
  * @bio_src:	Original bio
+ * @gfp_mask:	Memory allocation mask
  * @bs:		bio_set to allocate bip from
  *
  * Description:	Called to allocate a bip when cloning a bio
  */
 int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
-			struct bio_set *bs)
+			gfp_t gfp_mask, struct bio_set *bs)
 {
 	struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
 	struct bio_integrity_payload *bip;
 
 	BUG_ON(bip_src == NULL);
 
-	bip = bio_integrity_alloc_bioset(bio, GFP_NOIO, bip_src->bip_vcnt, bs);
+	bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs);
 
 	if (bip == NULL)
 		return -EIO;
diff --git a/fs/bio.c b/fs/bio.c
index 124b95c4d58..d4f06327c81 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -463,10 +463,12 @@ struct bio *bio_clone(struct bio *bio, gfp_t gfp_mask)
 	if (bio_integrity(bio)) {
 		int ret;
 
-		ret = bio_integrity_clone(b, bio, fs_bio_set);
+		ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set);
 
-		if (ret < 0)
+		if (ret < 0) {
+			bio_put(b);
 			return NULL;
+		}
 	}
 
 	return b;
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 42491d728e9..37f31b5529a 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -277,7 +277,7 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
 	if (*cow_ret == buf)
 		unlock_orig = 1;
 
-	WARN_ON(!btrfs_tree_locked(buf));
+	btrfs_assert_tree_locked(buf);
 
 	if (parent)
 		parent_start = parent->start;
@@ -2365,7 +2365,7 @@ static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
 	if (slot >= btrfs_header_nritems(upper) - 1)
 		return 1;
 
-	WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+	btrfs_assert_tree_locked(path->nodes[1]);
 
 	right = read_node_slot(root, upper, slot + 1);
 	btrfs_tree_lock(right);
@@ -2562,7 +2562,7 @@ static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
 	if (right_nritems == 0)
 		return 1;
 
-	WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+	btrfs_assert_tree_locked(path->nodes[1]);
 
 	left = read_node_slot(root, path->nodes[1], slot - 1);
 	btrfs_tree_lock(left);
@@ -4101,7 +4101,7 @@ int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path)
 
 		next = read_node_slot(root, c, slot);
 		if (!path->skip_locking) {
-			WARN_ON(!btrfs_tree_locked(c));
+			btrfs_assert_tree_locked(c);
 			btrfs_tree_lock(next);
 			btrfs_set_lock_blocking(next);
 		}
@@ -4126,7 +4126,7 @@ int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path)
 			reada_for_search(root, path, level, slot, 0);
 		next = read_node_slot(root, next, 0);
 		if (!path->skip_locking) {
-			WARN_ON(!btrfs_tree_locked(path->nodes[level]));
+			btrfs_assert_tree_locked(path->nodes[level]);
 			btrfs_tree_lock(next);
 			btrfs_set_lock_blocking(next);
 		}
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 82491ba8fa4..5e1d4e30e9d 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -784,7 +784,14 @@ struct btrfs_fs_info {
 	struct list_head dirty_cowonly_roots;
 
 	struct btrfs_fs_devices *fs_devices;
+
+	/*
+	 * the space_info list is almost entirely read only.  It only changes
+	 * when we add a new raid type to the FS, and that happens
+	 * very rarely.  RCU is used to protect it.
+	 */
 	struct list_head space_info;
+
 	spinlock_t delalloc_lock;
 	spinlock_t new_trans_lock;
 	u64 delalloc_bytes;
@@ -1797,6 +1804,8 @@ int btrfs_cleanup_reloc_trees(struct btrfs_root *root);
 int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
 u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
 void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
+void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
+
 int btrfs_check_metadata_free_space(struct btrfs_root *root);
 int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
 				u64 bytes);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index adda739a021..3e18175248e 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -857,7 +857,7 @@ int clean_tree_block(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 	struct inode *btree_inode = root->fs_info->btree_inode;
 	if (btrfs_header_generation(buf) ==
 	    root->fs_info->running_transaction->transid) {
-		WARN_ON(!btrfs_tree_locked(buf));
+		btrfs_assert_tree_locked(buf);
 
 		/* ugh, clear_extent_buffer_dirty can be expensive */
 		btrfs_set_lock_blocking(buf);
@@ -2361,7 +2361,7 @@ void btrfs_mark_buffer_dirty(struct extent_buffer *buf)
 
 	btrfs_set_lock_blocking(buf);
 
-	WARN_ON(!btrfs_tree_locked(buf));
+	btrfs_assert_tree_locked(buf);
 	if (transid != root->fs_info->generation) {
 		printk(KERN_CRIT "btrfs transid mismatch buffer %llu, "
 		       "found %llu running %llu\n",
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 6b5966aacf4..fefe83ad205 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -20,6 +20,7 @@
 #include <linux/writeback.h>
 #include <linux/blkdev.h>
 #include <linux/sort.h>
+#include <linux/rcupdate.h>
 #include "compat.h"
 #include "hash.h"
 #include "crc32c.h"
@@ -330,13 +331,33 @@ static struct btrfs_space_info *__find_space_info(struct btrfs_fs_info *info,
 {
 	struct list_head *head = &info->space_info;
 	struct btrfs_space_info *found;
-	list_for_each_entry(found, head, list) {
-		if (found->flags == flags)
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(found, head, list) {
+		if (found->flags == flags) {
+			rcu_read_unlock();
 			return found;
+		}
 	}
+	rcu_read_unlock();
 	return NULL;
 }
 
+/*
+ * after adding space to the filesystem, we need to clear the full flags
+ * on all the space infos.
+ */
+void btrfs_clear_space_info_full(struct btrfs_fs_info *info)
+{
+	struct list_head *head = &info->space_info;
+	struct btrfs_space_info *found;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(found, head, list)
+		found->full = 0;
+	rcu_read_unlock();
+}
+
 static u64 div_factor(u64 num, int factor)
 {
 	if (factor == 10)
@@ -1903,7 +1924,6 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags,
 	if (!found)
 		return -ENOMEM;
 
-	list_add(&found->list, &info->space_info);
 	INIT_LIST_HEAD(&found->block_groups);
 	init_rwsem(&found->groups_sem);
 	spin_lock_init(&found->lock);
@@ -1917,6 +1937,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags,
 	found->full = 0;
 	found->force_alloc = 0;
 	*space_info = found;
+	list_add_rcu(&found->list, &info->space_info);
 	return 0;
 }
 
@@ -4418,13 +4439,13 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
-	BUG_ON(!btrfs_tree_locked(parent));
+	btrfs_assert_tree_locked(parent);
 	parent_level = btrfs_header_level(parent);
 	extent_buffer_get(parent);
 	path->nodes[parent_level] = parent;
 	path->slots[parent_level] = btrfs_header_nritems(parent);
 
-	BUG_ON(!btrfs_tree_locked(node));
+	btrfs_assert_tree_locked(node);
 	level = btrfs_header_level(node);
 	extent_buffer_get(node);
 	path->nodes[level] = node;
@@ -6320,6 +6341,7 @@ out:
 int btrfs_free_block_groups(struct btrfs_fs_info *info)
 {
 	struct btrfs_block_group_cache *block_group;
+	struct btrfs_space_info *space_info;
 	struct rb_node *n;
 
 	spin_lock(&info->block_group_cache_lock);
@@ -6341,6 +6363,23 @@ int btrfs_free_block_groups(struct btrfs_fs_info *info)
 		spin_lock(&info->block_group_cache_lock);
 	}
 	spin_unlock(&info->block_group_cache_lock);
+
+	/* now that all the block groups are freed, go through and
+	 * free all the space_info structs.  This is only called during
+	 * the final stages of unmount, and so we know nobody is
+	 * using them.  We call synchronize_rcu() once before we start,
+	 * just to be on the safe side.
+	 */
+	synchronize_rcu();
+
+	while(!list_empty(&info->space_info)) {
+		space_info = list_entry(info->space_info.next,
+					struct btrfs_space_info,
+					list);
+
+		list_del(&space_info->list);
+		kfree(space_info);
+	}
 	return 0;
 }
 
diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c
index 85506c4a3af..47b0a88c12a 100644
--- a/fs/btrfs/locking.c
+++ b/fs/btrfs/locking.c
@@ -220,8 +220,8 @@ int btrfs_tree_unlock(struct extent_buffer *eb)
 	return 0;
 }
 
-int btrfs_tree_locked(struct extent_buffer *eb)
+void btrfs_assert_tree_locked(struct extent_buffer *eb)
 {
-	return test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags) ||
-			spin_is_locked(&eb->lock);
+	if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+		assert_spin_locked(&eb->lock);
 }
diff --git a/fs/btrfs/locking.h b/fs/btrfs/locking.h
index 6bb0afbff92..6c4ce457168 100644
--- a/fs/btrfs/locking.h
+++ b/fs/btrfs/locking.h
@@ -21,11 +21,11 @@
 
 int btrfs_tree_lock(struct extent_buffer *eb);
 int btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_tree_locked(struct extent_buffer *eb);
 
 int btrfs_try_tree_lock(struct extent_buffer *eb);
 int btrfs_try_spin_lock(struct extent_buffer *eb);
 
 void btrfs_set_lock_blocking(struct extent_buffer *eb);
 void btrfs_clear_lock_blocking(struct extent_buffer *eb);
+void btrfs_assert_tree_locked(struct extent_buffer *eb);
 #endif
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 1316139bf9e..dd06e18e5aa 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1374,6 +1374,12 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path)
 		ret = btrfs_add_device(trans, root, device);
 	}
 
+	/*
+	 * we've got more storage, clear any full flags on the space
+	 * infos
+	 */
+	btrfs_clear_space_info_full(root->fs_info);
+
 	unlock_chunks(root);
 	btrfs_commit_transaction(trans, root);
 
@@ -1459,6 +1465,8 @@ static int __btrfs_grow_device(struct btrfs_trans_handle *trans,
 	device->fs_devices->total_rw_bytes += diff;
 
 	device->total_bytes = new_size;
+	btrfs_clear_space_info_full(device->dev_root->fs_info);
+
 	return btrfs_update_device(trans, device);
 }
 
diff --git a/fs/buffer.c b/fs/buffer.c
index 9f697419ed8..891e1c78e4f 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -760,15 +760,9 @@ EXPORT_SYMBOL(mark_buffer_dirty_inode);
  * If warn is true, then emit a warning if the page is not uptodate and has
  * not been truncated.
  */
-static int __set_page_dirty(struct page *page,
+static void __set_page_dirty(struct page *page,
 		struct address_space *mapping, int warn)
 {
-	if (unlikely(!mapping))
-		return !TestSetPageDirty(page);
-
-	if (TestSetPageDirty(page))
-		return 0;
-
 	spin_lock_irq(&mapping->tree_lock);
 	if (page->mapping) {	/* Race with truncate? */
 		WARN_ON_ONCE(warn && !PageUptodate(page));
@@ -785,8 +779,6 @@ static int __set_page_dirty(struct page *page,
 	}
 	spin_unlock_irq(&mapping->tree_lock);
 	__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
-
-	return 1;
 }
 
 /*
@@ -816,6 +808,7 @@ static int __set_page_dirty(struct page *page,
  */
 int __set_page_dirty_buffers(struct page *page)
 {
+	int newly_dirty;
 	struct address_space *mapping = page_mapping(page);
 
 	if (unlikely(!mapping))
@@ -831,9 +824,12 @@ int __set_page_dirty_buffers(struct page *page)
 			bh = bh->b_this_page;
 		} while (bh != head);
 	}
+	newly_dirty = !TestSetPageDirty(page);
 	spin_unlock(&mapping->private_lock);
 
-	return __set_page_dirty(page, mapping, 1);
+	if (newly_dirty)
+		__set_page_dirty(page, mapping, 1);
+	return newly_dirty;
 }
 EXPORT_SYMBOL(__set_page_dirty_buffers);
 
@@ -1262,8 +1258,11 @@ void mark_buffer_dirty(struct buffer_head *bh)
 			return;
 	}
 
-	if (!test_set_buffer_dirty(bh))
-		__set_page_dirty(bh->b_page, page_mapping(bh->b_page), 0);
+	if (!test_set_buffer_dirty(bh)) {
+		struct page *page = bh->b_page;
+		if (!TestSetPageDirty(page))
+			__set_page_dirty(page, page_mapping(page), 0);
+	}
 }
 
 /*
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 5f3231b9633..bff4052b05e 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -198,9 +198,6 @@ static int mknod_ptmx(struct super_block *sb)
 
 	fsi->ptmx_dentry = dentry;
 	rc = 0;
-
-	printk(KERN_DEBUG "Created ptmx node in devpts ino %lu\n",
-			inode->i_ino);
 out:
 	mutex_unlock(&root->d_inode->i_mutex);
 	return rc;
@@ -369,8 +366,6 @@ static int new_pts_mount(struct file_system_type *fs_type, int flags,
 	struct pts_fs_info *fsi;
 	struct pts_mount_opts *opts;
 
-	printk(KERN_NOTICE "devpts: newinstance mount\n");
-
 	err = get_sb_nodev(fs_type, flags, data, devpts_fill_super, mnt);
 	if (err)
 		return err;
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index f6caeb1d110..8b65f289ee0 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -946,6 +946,8 @@ static int ecryptfs_copy_mount_wide_sigs_to_inode_sigs(
 	list_for_each_entry(global_auth_tok,
 			    &mount_crypt_stat->global_auth_tok_list,
 			    mount_crypt_stat_list) {
+		if (global_auth_tok->flags & ECRYPTFS_AUTH_TOK_FNEK)
+			continue;
 		rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig);
 		if (rc) {
 			printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
@@ -1322,14 +1324,13 @@ static int ecryptfs_write_headers_virt(char *page_virt, size_t max,
 }
 
 static int
-ecryptfs_write_metadata_to_contents(struct ecryptfs_crypt_stat *crypt_stat,
-				    struct dentry *ecryptfs_dentry,
-				    char *virt)
+ecryptfs_write_metadata_to_contents(struct dentry *ecryptfs_dentry,
+				    char *virt, size_t virt_len)
 {
 	int rc;
 
 	rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
-				  0, crypt_stat->num_header_bytes_at_front);
+				  0, virt_len);
 	if (rc)
 		printk(KERN_ERR "%s: Error attempting to write header "
 		       "information to lower file; rc = [%d]\n", __func__,
@@ -1339,7 +1340,6 @@ ecryptfs_write_metadata_to_contents(struct ecryptfs_crypt_stat *crypt_stat,
 
 static int
 ecryptfs_write_metadata_to_xattr(struct dentry *ecryptfs_dentry,
-				 struct ecryptfs_crypt_stat *crypt_stat,
 				 char *page_virt, size_t size)
 {
 	int rc;
@@ -1349,6 +1349,17 @@ ecryptfs_write_metadata_to_xattr(struct dentry *ecryptfs_dentry,
 	return rc;
 }
 
+static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask,
+					       unsigned int order)
+{
+	struct page *page;
+
+	page = alloc_pages(gfp_mask | __GFP_ZERO, order);
+	if (page)
+		return (unsigned long) page_address(page);
+	return 0;
+}
+
 /**
  * ecryptfs_write_metadata
  * @ecryptfs_dentry: The eCryptfs dentry
@@ -1365,7 +1376,9 @@ int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry)
 {
 	struct ecryptfs_crypt_stat *crypt_stat =
 		&ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+	unsigned int order;
 	char *virt;
+	size_t virt_len;
 	size_t size = 0;
 	int rc = 0;
 
@@ -1381,33 +1394,35 @@ int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry)
 		rc = -EINVAL;
 		goto out;
 	}
+	virt_len = crypt_stat->num_header_bytes_at_front;
+	order = get_order(virt_len);
 	/* Released in this function */
-	virt = (char *)get_zeroed_page(GFP_KERNEL);
+	virt = (char *)ecryptfs_get_zeroed_pages(GFP_KERNEL, order);
 	if (!virt) {
 		printk(KERN_ERR "%s: Out of memory\n", __func__);
 		rc = -ENOMEM;
 		goto out;
 	}
-	rc = ecryptfs_write_headers_virt(virt, PAGE_CACHE_SIZE, &size,
-					 crypt_stat, ecryptfs_dentry);
+	rc = ecryptfs_write_headers_virt(virt, virt_len, &size, crypt_stat,
+					 ecryptfs_dentry);
 	if (unlikely(rc)) {
 		printk(KERN_ERR "%s: Error whilst writing headers; rc = [%d]\n",
 		       __func__, rc);
 		goto out_free;
 	}
 	if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
-		rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry,
-						      crypt_stat, virt, size);
+		rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry, virt,
+						      size);
 	else
-		rc = ecryptfs_write_metadata_to_contents(crypt_stat,
-							 ecryptfs_dentry, virt);
+		rc = ecryptfs_write_metadata_to_contents(ecryptfs_dentry, virt,
+							 virt_len);
 	if (rc) {
 		printk(KERN_ERR "%s: Error writing metadata out to lower file; "
 		       "rc = [%d]\n", __func__, rc);
 		goto out_free;
 	}
 out_free:
-	free_page((unsigned long)virt);
+	free_pages((unsigned long)virt, order);
 out:
 	return rc;
 }
@@ -2206,17 +2221,19 @@ int ecryptfs_decode_and_decrypt_filename(char **plaintext_name,
 					 struct dentry *ecryptfs_dir_dentry,
 					 const char *name, size_t name_size)
 {
+	struct ecryptfs_mount_crypt_stat *mount_crypt_stat =
+		&ecryptfs_superblock_to_private(
+			ecryptfs_dir_dentry->d_sb)->mount_crypt_stat;
 	char *decoded_name;
 	size_t decoded_name_size;
 	size_t packet_size;
 	int rc = 0;
 
-	if ((name_size > ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE)
+	if ((mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
+	    && !(mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
+	    && (name_size > ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE)
 	    && (strncmp(name, ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX,
 			ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE) == 0)) {
-		struct ecryptfs_mount_crypt_stat *mount_crypt_stat =
-			&ecryptfs_superblock_to_private(
-				ecryptfs_dir_dentry->d_sb)->mount_crypt_stat;
 		const char *orig_name = name;
 		size_t orig_name_size = name_size;
 
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index c11fc95714a..ac749d4d644 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -328,6 +328,7 @@ struct ecryptfs_dentry_info {
  */
 struct ecryptfs_global_auth_tok {
 #define ECRYPTFS_AUTH_TOK_INVALID 0x00000001
+#define ECRYPTFS_AUTH_TOK_FNEK    0x00000002
 	u32 flags;
 	struct list_head mount_crypt_stat_list;
 	struct key *global_auth_tok_key;
@@ -619,7 +620,6 @@ int ecryptfs_interpose(struct dentry *hidden_dentry,
 		       u32 flags);
 int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 					struct dentry *lower_dentry,
-					struct ecryptfs_crypt_stat *crypt_stat,
 					struct inode *ecryptfs_dir_inode,
 					struct nameidata *ecryptfs_nd);
 int ecryptfs_decode_and_decrypt_filename(char **decrypted_name,
@@ -696,7 +696,7 @@ ecryptfs_write_header_metadata(char *virt,
 int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig);
 int
 ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
-			   char *sig);
+			   char *sig, u32 global_auth_tok_flags);
 int ecryptfs_get_global_auth_tok_for_sig(
 	struct ecryptfs_global_auth_tok **global_auth_tok,
 	struct ecryptfs_mount_crypt_stat *mount_crypt_stat, char *sig);
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 5697899a168..55b3145b807 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -246,7 +246,6 @@ out:
  */
 int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 					struct dentry *lower_dentry,
-					struct ecryptfs_crypt_stat *crypt_stat,
 					struct inode *ecryptfs_dir_inode,
 					struct nameidata *ecryptfs_nd)
 {
@@ -254,6 +253,7 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 	struct vfsmount *lower_mnt;
 	struct inode *lower_inode;
 	struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
+	struct ecryptfs_crypt_stat *crypt_stat;
 	char *page_virt = NULL;
 	u64 file_size;
 	int rc = 0;
@@ -314,6 +314,11 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 			goto out_free_kmem;
 		}
 	}
+	crypt_stat = &ecryptfs_inode_to_private(
+					ecryptfs_dentry->d_inode)->crypt_stat;
+	/* TODO: lock for crypt_stat comparison */
+	if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED))
+			ecryptfs_set_default_sizes(crypt_stat);
 	rc = ecryptfs_read_and_validate_header_region(page_virt,
 						      ecryptfs_dentry->d_inode);
 	if (rc) {
@@ -362,9 +367,7 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 {
 	char *encrypted_and_encoded_name = NULL;
 	size_t encrypted_and_encoded_name_size;
-	struct ecryptfs_crypt_stat *crypt_stat = NULL;
 	struct ecryptfs_mount_crypt_stat *mount_crypt_stat = NULL;
-	struct ecryptfs_inode_info *inode_info;
 	struct dentry *lower_dir_dentry, *lower_dentry;
 	int rc = 0;
 
@@ -388,26 +391,15 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 	}
 	if (lower_dentry->d_inode)
 		goto lookup_and_interpose;
-	inode_info =  ecryptfs_inode_to_private(ecryptfs_dentry->d_inode);
-	if (inode_info) {
-		crypt_stat = &inode_info->crypt_stat;
-		/* TODO: lock for crypt_stat comparison */
-		if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED))
-			ecryptfs_set_default_sizes(crypt_stat);
-	}
-	if (crypt_stat)
-		mount_crypt_stat = crypt_stat->mount_crypt_stat;
-	else
-		mount_crypt_stat = &ecryptfs_superblock_to_private(
-			ecryptfs_dentry->d_sb)->mount_crypt_stat;
-	if (!(crypt_stat && (crypt_stat->flags & ECRYPTFS_ENCRYPT_FILENAMES))
-	    && !(mount_crypt_stat && (mount_crypt_stat->flags
-				     & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)))
+	mount_crypt_stat = &ecryptfs_superblock_to_private(
+				ecryptfs_dentry->d_sb)->mount_crypt_stat;
+	if (!(mount_crypt_stat
+	    && (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)))
 		goto lookup_and_interpose;
 	dput(lower_dentry);
 	rc = ecryptfs_encrypt_and_encode_filename(
 		&encrypted_and_encoded_name, &encrypted_and_encoded_name_size,
-		crypt_stat, mount_crypt_stat, ecryptfs_dentry->d_name.name,
+		NULL, mount_crypt_stat, ecryptfs_dentry->d_name.name,
 		ecryptfs_dentry->d_name.len);
 	if (rc) {
 		printk(KERN_ERR "%s: Error attempting to encrypt and encode "
@@ -426,7 +418,7 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 	}
 lookup_and_interpose:
 	rc = ecryptfs_lookup_and_interpose_lower(ecryptfs_dentry, lower_dentry,
-						 crypt_stat, ecryptfs_dir_inode,
+						 ecryptfs_dir_inode,
 						 ecryptfs_nd);
 	goto out;
 out_d_drop:
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index ff539420cc6..e4a6223c314 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -2375,7 +2375,7 @@ struct kmem_cache *ecryptfs_global_auth_tok_cache;
 
 int
 ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
-			     char *sig)
+			     char *sig, u32 global_auth_tok_flags)
 {
 	struct ecryptfs_global_auth_tok *new_auth_tok;
 	int rc = 0;
@@ -2389,6 +2389,7 @@ ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
 		goto out;
 	}
 	memcpy(new_auth_tok->sig, sig, ECRYPTFS_SIG_SIZE_HEX);
+	new_auth_tok->flags = global_auth_tok_flags;
 	new_auth_tok->sig[ECRYPTFS_SIG_SIZE_HEX] = '\0';
 	mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
 	list_add(&new_auth_tok->mount_crypt_stat_list,
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 789cf2e1be1..aed56c25539 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -319,7 +319,7 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options)
 		case ecryptfs_opt_ecryptfs_sig:
 			sig_src = args[0].from;
 			rc = ecryptfs_add_global_auth_tok(mount_crypt_stat,
-							  sig_src);
+							  sig_src, 0);
 			if (rc) {
 				printk(KERN_ERR "Error attempting to register "
 				       "global sig; rc = [%d]\n", rc);
@@ -370,7 +370,8 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options)
 				ECRYPTFS_SIG_SIZE_HEX] = '\0';
 			rc = ecryptfs_add_global_auth_tok(
 				mount_crypt_stat,
-				mount_crypt_stat->global_default_fnek_sig);
+				mount_crypt_stat->global_default_fnek_sig,
+				ECRYPTFS_AUTH_TOK_FNEK);
 			if (rc) {
 				printk(KERN_ERR "Error attempting to register "
 				       "global fnek sig [%s]; rc = [%d]\n",
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e2eab196875..e0aa4fe4f59 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1122,7 +1122,8 @@ ext4_ext_search_right(struct inode *inode, struct ext4_ext_path *path,
 	struct ext4_extent_idx *ix;
 	struct ext4_extent *ex;
 	ext4_fsblk_t block;
-	int depth, ee_len;
+	int depth;	/* Note, NOT eh_depth; depth from top of tree */
+	int ee_len;
 
 	BUG_ON(path == NULL);
 	depth = path->p_depth;
@@ -1179,7 +1180,8 @@ got_index:
 		if (bh == NULL)
 			return -EIO;
 		eh = ext_block_hdr(bh);
-		if (ext4_ext_check_header(inode, eh, depth)) {
+		/* subtract from p_depth to get proper eh_depth */
+		if (ext4_ext_check_header(inode, eh, path->p_depth - depth)) {
 			put_bh(bh);
 			return -EIO;
 		}
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index f18a919be70..2d2b3585ee9 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -188,7 +188,7 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)
 	struct ext4_group_desc *gdp;
 	struct ext4_super_block *es;
 	struct ext4_sb_info *sbi;
-	int fatal = 0, err, count;
+	int fatal = 0, err, count, cleared;
 	ext4_group_t flex_group;
 
 	if (atomic_read(&inode->i_count) > 1) {
@@ -248,8 +248,10 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)
 		goto error_return;
 
 	/* Ok, now we can actually update the inode bitmaps.. */
-	if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group),
-					bit, bitmap_bh->b_data))
+	spin_lock(sb_bgl_lock(sbi, block_group));
+	cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
+	spin_unlock(sb_bgl_lock(sbi, block_group));
+	if (!cleared)
 		ext4_error(sb, "ext4_free_inode",
 			   "bit already cleared for inode %lu", ino);
 	else {
@@ -696,6 +698,7 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode)
 	struct inode *ret;
 	ext4_group_t i;
 	int free = 0;
+	static int once = 1;
 	ext4_group_t flex_group;
 
 	/* Cannot create files in a deleted directory */
@@ -717,7 +720,8 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode)
 		ret2 = find_group_flex(sb, dir, &group);
 		if (ret2 == -1) {
 			ret2 = find_group_other(sb, dir, &group);
-			if (ret2 == 0 && printk_ratelimit())
+			if (ret2 == 0 && once)
+				once = 0;
 				printk(KERN_NOTICE "ext4: find_group_flex "
 				       "failed, fallback succeeded dir %lu\n",
 				       dir->i_ino);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 4415beeb0b6..9f61e62f435 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1447,7 +1447,7 @@ static void ext4_mb_measure_extent(struct ext4_allocation_context *ac,
 	struct ext4_free_extent *gex = &ac->ac_g_ex;
 
 	BUG_ON(ex->fe_len <= 0);
-	BUG_ON(ex->fe_len >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+	BUG_ON(ex->fe_len > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
 	BUG_ON(ex->fe_start >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
 	BUG_ON(ac->ac_status != AC_STATUS_CONTINUE);
 
@@ -3292,7 +3292,7 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
 	}
 	BUG_ON(start + size <= ac->ac_o_ex.fe_logical &&
 			start > ac->ac_o_ex.fe_logical);
-	BUG_ON(size <= 0 || size >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+	BUG_ON(size <= 0 || size > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
 
 	/* now prepare goal request */
 
@@ -3589,6 +3589,7 @@ static void ext4_mb_put_pa(struct ext4_allocation_context *ac,
 			struct super_block *sb, struct ext4_prealloc_space *pa)
 {
 	ext4_group_t grp;
+	ext4_fsblk_t grp_blk;
 
 	if (!atomic_dec_and_test(&pa->pa_count) || pa->pa_free != 0)
 		return;
@@ -3603,8 +3604,12 @@ static void ext4_mb_put_pa(struct ext4_allocation_context *ac,
 	pa->pa_deleted = 1;
 	spin_unlock(&pa->pa_lock);
 
-	/* -1 is to protect from crossing allocation group */
-	ext4_get_group_no_and_offset(sb, pa->pa_pstart - 1, &grp, NULL);
+	grp_blk = pa->pa_pstart;
+	/* If linear, pa_pstart may be in the next group when pa is used up */
+	if (pa->pa_linear)
+		grp_blk--;
+
+	ext4_get_group_no_and_offset(sb, grp_blk, &grp, NULL);
 
 	/*
 	 * possible race:
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 6b74d09adbe..de0004fe6e0 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -202,9 +202,9 @@ static sector_t _fat_bmap(struct address_space *mapping, sector_t block)
 	sector_t blocknr;
 
 	/* fat_get_cluster() assumes the requested blocknr isn't truncated. */
-	mutex_lock(&mapping->host->i_mutex);
+	down_read(&mapping->host->i_alloc_sem);
 	blocknr = generic_block_bmap(mapping, block, fat_get_block);
-	mutex_unlock(&mapping->host->i_mutex);
+	up_read(&mapping->host->i_alloc_sem);
 
 	return blocknr;
 }
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index e5eaa62fd17..e3fe9918faa 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -274,6 +274,7 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
 	int ret;
 
 	BUG_ON(inode->i_state & I_SYNC);
+	WARN_ON(inode->i_state & I_NEW);
 
 	/* Set I_SYNC, reset I_DIRTY */
 	dirty = inode->i_state & I_DIRTY;
@@ -298,6 +299,7 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
 	}
 
 	spin_lock(&inode_lock);
+	WARN_ON(inode->i_state & I_NEW);
 	inode->i_state &= ~I_SYNC;
 	if (!(inode->i_state & I_FREEING)) {
 		if (!(inode->i_state & I_DIRTY) &&
@@ -470,6 +472,11 @@ void generic_sync_sb_inodes(struct super_block *sb,
 			break;
 		}
 
+		if (inode->i_state & I_NEW) {
+			requeue_io(inode);
+			continue;
+		}
+
 		if (wbc->nonblocking && bdi_write_congested(bdi)) {
 			wbc->encountered_congestion = 1;
 			if (!sb_is_blkdev_sb(sb))
@@ -531,7 +538,7 @@ void generic_sync_sb_inodes(struct super_block *sb,
 		list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
 			struct address_space *mapping;
 
-			if (inode->i_state & (I_FREEING|I_WILL_FREE))
+			if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
 				continue;
 			mapping = inode->i_mapping;
 			if (mapping->nrpages == 0)
diff --git a/fs/inode.c b/fs/inode.c
index 913ab2d9a5d..826fb0b9d1c 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -359,6 +359,7 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose)
 		invalidate_inode_buffers(inode);
 		if (!atomic_read(&inode->i_count)) {
 			list_move(&inode->i_list, dispose);
+			WARN_ON(inode->i_state & I_NEW);
 			inode->i_state |= I_FREEING;
 			count++;
 			continue;
@@ -460,6 +461,7 @@ static void prune_icache(int nr_to_scan)
 				continue;
 		}
 		list_move(&inode->i_list, &freeable);
+		WARN_ON(inode->i_state & I_NEW);
 		inode->i_state |= I_FREEING;
 		nr_pruned++;
 	}
@@ -656,6 +658,7 @@ void unlock_new_inode(struct inode *inode)
 	 * just created it (so there can be no old holders
 	 * that haven't tested I_LOCK).
 	 */
+	WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW));
 	inode->i_state &= ~(I_LOCK|I_NEW);
 	wake_up_inode(inode);
 }
@@ -1145,6 +1148,7 @@ void generic_delete_inode(struct inode *inode)
 
 	list_del_init(&inode->i_list);
 	list_del_init(&inode->i_sb_list);
+	WARN_ON(inode->i_state & I_NEW);
 	inode->i_state |= I_FREEING;
 	inodes_stat.nr_inodes--;
 	spin_unlock(&inode_lock);
@@ -1186,16 +1190,19 @@ static void generic_forget_inode(struct inode *inode)
 			spin_unlock(&inode_lock);
 			return;
 		}
+		WARN_ON(inode->i_state & I_NEW);
 		inode->i_state |= I_WILL_FREE;
 		spin_unlock(&inode_lock);
 		write_inode_now(inode, 1);
 		spin_lock(&inode_lock);
+		WARN_ON(inode->i_state & I_NEW);
 		inode->i_state &= ~I_WILL_FREE;
 		inodes_stat.nr_unused--;
 		hlist_del_init(&inode->i_hash);
 	}
 	list_del_init(&inode->i_list);
 	list_del_init(&inode->i_sb_list);
+	WARN_ON(inode->i_state & I_NEW);
 	inode->i_state |= I_FREEING;
 	inodes_stat.nr_inodes--;
 	spin_unlock(&inode_lock);
diff --git a/fs/lockd/clntlock.c b/fs/lockd/clntlock.c
index 1f3b0fc0d35..aedc47a264c 100644
--- a/fs/lockd/clntlock.c
+++ b/fs/lockd/clntlock.c
@@ -139,6 +139,55 @@ int nlmclnt_block(struct nlm_wait *block, struct nlm_rqst *req, long timeout)
 	return 0;
 }
 
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+static const struct in6_addr *nlmclnt_map_v4addr(const struct sockaddr *sap,
+						 struct in6_addr *addr_mapped)
+{
+	const struct sockaddr_in *sin = (const struct sockaddr_in *)sap;
+
+	switch (sap->sa_family) {
+	case AF_INET6:
+		return &((const struct sockaddr_in6 *)sap)->sin6_addr;
+	case AF_INET:
+		ipv6_addr_set_v4mapped(sin->sin_addr.s_addr, addr_mapped);
+		return addr_mapped;
+	}
+
+	return NULL;
+}
+
+/*
+ * If lockd is using a PF_INET6 listener, all incoming requests appear
+ * to come from AF_INET6 remotes.  The address of AF_INET remotes are
+ * mapped to AF_INET6 automatically by the network layer.  In case the
+ * user passed an AF_INET server address at mount time, ensure both
+ * addresses are AF_INET6 before comparing them.
+ */
+static int nlmclnt_cmp_addr(const struct nlm_host *host,
+			    const struct sockaddr *sap)
+{
+	const struct in6_addr *addr1;
+	const struct in6_addr *addr2;
+	struct in6_addr addr1_mapped;
+	struct in6_addr addr2_mapped;
+
+	addr1 = nlmclnt_map_v4addr(nlm_addr(host), &addr1_mapped);
+	if (likely(addr1 != NULL)) {
+		addr2 = nlmclnt_map_v4addr(sap, &addr2_mapped);
+		if (likely(addr2 != NULL))
+			return ipv6_addr_equal(addr1, addr2);
+	}
+
+	return 0;
+}
+#else	/* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+static int nlmclnt_cmp_addr(const struct nlm_host *host,
+			    const struct sockaddr *sap)
+{
+	return nlm_cmp_addr(nlm_addr(host), sap);
+}
+#endif	/* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+
 /*
  * The server lockd has called us back to tell us the lock was granted
  */
@@ -166,7 +215,7 @@ __be32 nlmclnt_grant(const struct sockaddr *addr, const struct nlm_lock *lock)
 		 */
 		if (fl_blocked->fl_u.nfs_fl.owner->pid != lock->svid)
 			continue;
-		if (!nlm_cmp_addr(nlm_addr(block->b_host), addr))
+		if (!nlmclnt_cmp_addr(block->b_host, addr))
 			continue;
 		if (nfs_compare_fh(NFS_FH(fl_blocked->fl_file->f_path.dentry->d_inode) ,fh) != 0)
 			continue;
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index d1d1eb84679..618865b3128 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
  *
- *  Copyright (C) 1996  Gertjan van Wingerde    (gertjan@cs.vu.nl)
+ *  Copyright (C) 1996  Gertjan van Wingerde
  *	Minix V2 fs support.
  *
  *  Modified for 680x0 by Andreas Schwab
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 9b728f3565a..574158ae239 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -255,6 +255,32 @@ static int nfs_sockaddr_match_ipaddr(const struct sockaddr *sa1,
 	}
 	return 0;
 }
+
+/*
+ * Test if two ip6 socket addresses refer to the same socket by
+ * comparing relevant fields. The padding bytes specifically, are not
+ * compared. sin6_flowinfo is not compared because it only affects QoS
+ * and sin6_scope_id is only compared if the address is "link local"
+ * because "link local" addresses need only be unique to a specific
+ * link. Conversely, ordinary unicast addresses might have different
+ * sin6_scope_id.
+ *
+ * The caller should ensure both socket addresses are AF_INET6.
+ */
+static int nfs_sockaddr_cmp_ip6(const struct sockaddr *sa1,
+				const struct sockaddr *sa2)
+{
+	const struct sockaddr_in6 *saddr1 = (const struct sockaddr_in6 *)sa1;
+	const struct sockaddr_in6 *saddr2 = (const struct sockaddr_in6 *)sa2;
+
+	if (!ipv6_addr_equal(&saddr1->sin6_addr,
+			     &saddr1->sin6_addr))
+		return 0;
+	if (ipv6_addr_scope(&saddr1->sin6_addr) == IPV6_ADDR_SCOPE_LINKLOCAL &&
+	    saddr1->sin6_scope_id != saddr2->sin6_scope_id)
+		return 0;
+	return saddr1->sin6_port == saddr2->sin6_port;
+}
 #else
 static int nfs_sockaddr_match_ipaddr4(const struct sockaddr_in *sa1,
 				 const struct sockaddr_in *sa2)
@@ -270,9 +296,52 @@ static int nfs_sockaddr_match_ipaddr(const struct sockaddr *sa1,
 	return nfs_sockaddr_match_ipaddr4((const struct sockaddr_in *)sa1,
 			(const struct sockaddr_in *)sa2);
 }
+
+static int nfs_sockaddr_cmp_ip6(const struct sockaddr * sa1,
+				const struct sockaddr * sa2)
+{
+	return 0;
+}
 #endif
 
 /*
+ * Test if two ip4 socket addresses refer to the same socket, by
+ * comparing relevant fields. The padding bytes specifically, are
+ * not compared.
+ *
+ * The caller should ensure both socket addresses are AF_INET.
+ */
+static int nfs_sockaddr_cmp_ip4(const struct sockaddr *sa1,
+				const struct sockaddr *sa2)
+{
+	const struct sockaddr_in *saddr1 = (const struct sockaddr_in *)sa1;
+	const struct sockaddr_in *saddr2 = (const struct sockaddr_in *)sa2;
+
+	if (saddr1->sin_addr.s_addr != saddr2->sin_addr.s_addr)
+		return 0;
+	return saddr1->sin_port == saddr2->sin_port;
+}
+
+/*
+ * Test if two socket addresses represent the same actual socket,
+ * by comparing (only) relevant fields.
+ */
+static int nfs_sockaddr_cmp(const struct sockaddr *sa1,
+			    const struct sockaddr *sa2)
+{
+	if (sa1->sa_family != sa2->sa_family)
+		return 0;
+
+	switch (sa1->sa_family) {
+	case AF_INET:
+		return nfs_sockaddr_cmp_ip4(sa1, sa2);
+	case AF_INET6:
+		return nfs_sockaddr_cmp_ip6(sa1, sa2);
+	}
+	return 0;
+}
+
+/*
  * Find a client by IP address and protocol version
  * - returns NULL if no such client
  */
@@ -344,8 +413,10 @@ struct nfs_client *nfs_find_client_next(struct nfs_client *clp)
 static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *data)
 {
 	struct nfs_client *clp;
+	const struct sockaddr *sap = data->addr;
 
 	list_for_each_entry(clp, &nfs_client_list, cl_share_link) {
+	        const struct sockaddr *clap = (struct sockaddr *)&clp->cl_addr;
 		/* Don't match clients that failed to initialise properly */
 		if (clp->cl_cons_state < 0)
 			continue;
@@ -358,7 +429,7 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat
 			continue;
 
 		/* Match the full socket address */
-		if (memcmp(&clp->cl_addr, data->addr, sizeof(clp->cl_addr)) != 0)
+		if (!nfs_sockaddr_cmp(sap, clap))
 			continue;
 
 		atomic_inc(&clp->cl_count);
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index e35c8199f82..672368f865c 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1892,8 +1892,14 @@ static int nfs_do_access(struct inode *inode, struct rpc_cred *cred, int mask)
 	cache.cred = cred;
 	cache.jiffies = jiffies;
 	status = NFS_PROTO(inode)->access(inode, &cache);
-	if (status != 0)
+	if (status != 0) {
+		if (status == -ESTALE) {
+			nfs_zap_caches(inode);
+			if (!S_ISDIR(inode->i_mode))
+				set_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
+		}
 		return status;
+	}
 	nfs_access_add_cache(inode, &cache);
 out:
 	if ((mask & ~cache.mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index cef62557c87..6bbf0e6daad 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -292,7 +292,7 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
 {
 	struct nfs_server *server = NFS_SERVER(inode);
 	struct nfs_fattr fattr;
-	struct page *pages[NFSACL_MAXPAGES] = { };
+	struct page *pages[NFSACL_MAXPAGES];
 	struct nfs3_setaclargs args = {
 		.inode = inode,
 		.mask = NFS_ACL,
@@ -303,7 +303,7 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
 		.rpc_argp	= &args,
 		.rpc_resp	= &fattr,
 	};
-	int status, count;
+	int status;
 
 	status = -EOPNOTSUPP;
 	if (!nfs_server_capable(inode, NFS_CAP_ACLS))
@@ -319,6 +319,20 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
 	if (S_ISDIR(inode->i_mode)) {
 		args.mask |= NFS_DFACL;
 		args.acl_default = dfacl;
+		args.len = nfsacl_size(acl, dfacl);
+	} else
+		args.len = nfsacl_size(acl, NULL);
+
+	if (args.len > NFS_ACL_INLINE_BUFSIZE) {
+		unsigned int npages = 1 + ((args.len - 1) >> PAGE_SHIFT);
+
+		status = -ENOMEM;
+		do {
+			args.pages[args.npages] = alloc_page(GFP_KERNEL);
+			if (args.pages[args.npages] == NULL)
+				goto out_freepages;
+			args.npages++;
+		} while (args.npages < npages);
 	}
 
 	dprintk("NFS call setacl\n");
@@ -329,10 +343,6 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
 	nfs_zap_acl_cache(inode);
 	dprintk("NFS reply setacl: %d\n", status);
 
-	/* pages may have been allocated at the xdr layer. */
-	for (count = 0; count < NFSACL_MAXPAGES && args.pages[count]; count++)
-		__free_page(args.pages[count]);
-
 	switch (status) {
 		case 0:
 			status = nfs_refresh_inode(inode, &fattr);
@@ -346,6 +356,11 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
 		case -ENOTSUPP:
 			status = -EOPNOTSUPP;
 	}
+out_freepages:
+	while (args.npages != 0) {
+		args.npages--;
+		__free_page(args.pages[args.npages]);
+	}
 out:
 	return status;
 }
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index 11cdddec143..6cdeacffde4 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -82,8 +82,10 @@
 #define NFS3_commitres_sz	(1+NFS3_wcc_data_sz+2)
 
 #define ACL3_getaclargs_sz	(NFS3_fh_sz+1)
-#define ACL3_setaclargs_sz	(NFS3_fh_sz+1+2*(2+5*3))
-#define ACL3_getaclres_sz	(1+NFS3_post_op_attr_sz+1+2*(2+5*3))
+#define ACL3_setaclargs_sz	(NFS3_fh_sz+1+ \
+				XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE))
+#define ACL3_getaclres_sz	(1+NFS3_post_op_attr_sz+1+ \
+				XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE))
 #define ACL3_setaclres_sz	(1+NFS3_post_op_attr_sz)
 
 /*
@@ -703,28 +705,18 @@ nfs3_xdr_setaclargs(struct rpc_rqst *req, __be32 *p,
                    struct nfs3_setaclargs *args)
 {
 	struct xdr_buf *buf = &req->rq_snd_buf;
-	unsigned int base, len_in_head, len = nfsacl_size(
-		(args->mask & NFS_ACL)   ? args->acl_access  : NULL,
-		(args->mask & NFS_DFACL) ? args->acl_default : NULL);
-	int count, err;
+	unsigned int base;
+	int err;
 
 	p = xdr_encode_fhandle(p, NFS_FH(args->inode));
 	*p++ = htonl(args->mask);
-	base = (char *)p - (char *)buf->head->iov_base;
-	/* put as much of the acls into head as possible. */
-	len_in_head = min_t(unsigned int, buf->head->iov_len - base, len);
-	len -= len_in_head;
-	req->rq_slen = xdr_adjust_iovec(req->rq_svec, p + (len_in_head >> 2));
-
-	for (count = 0; (count << PAGE_SHIFT) < len; count++) {
-		args->pages[count] = alloc_page(GFP_KERNEL);
-		if (!args->pages[count]) {
-			while (count)
-				__free_page(args->pages[--count]);
-			return -ENOMEM;
-		}
-	}
-	xdr_encode_pages(buf, args->pages, 0, len);
+	req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
+	base = req->rq_slen;
+
+	if (args->npages != 0)
+		xdr_encode_pages(buf, args->pages, 0, args->len);
+	else
+		req->rq_slen += args->len;
 
 	err = nfsacl_encode(buf, base, args->inode,
 			    (args->mask & NFS_ACL) ?
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 30befc39b3c..2a2a0a7143a 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -21,7 +21,9 @@
 #define NFSDBG_FACILITY		NFSDBG_VFS
 
 /*
- * Check if fs_root is valid
+ * Convert the NFSv4 pathname components into a standard posix path.
+ *
+ * Note that the resulting string will be placed at the end of the buffer
  */
 static inline char *nfs4_pathname_string(const struct nfs4_pathname *pathname,
 					 char *buffer, ssize_t buflen)
@@ -99,21 +101,20 @@ static struct vfsmount *try_location(struct nfs_clone_mount *mountdata,
 {
 	struct vfsmount *mnt = ERR_PTR(-ENOENT);
 	char *mnt_path;
-	int page2len;
+	unsigned int maxbuflen;
 	unsigned int s;
 
 	mnt_path = nfs4_pathname_string(&location->rootpath, page2, PAGE_SIZE);
 	if (IS_ERR(mnt_path))
 		return mnt;
 	mountdata->mnt_path = mnt_path;
-	page2 += strlen(mnt_path) + 1;
-	page2len = PAGE_SIZE - strlen(mnt_path) - 1;
+	maxbuflen = mnt_path - 1 - page2;
 
 	for (s = 0; s < location->nservers; s++) {
 		const struct nfs4_string *buf = &location->servers[s];
 		struct sockaddr_storage addr;
 
-		if (buf->len <= 0 || buf->len >= PAGE_SIZE)
+		if (buf->len <= 0 || buf->len >= maxbuflen)
 			continue;
 
 		mountdata->addr = (struct sockaddr *)&addr;
@@ -126,8 +127,8 @@ static struct vfsmount *try_location(struct nfs_clone_mount *mountdata,
 			continue;
 		nfs_set_port(mountdata->addr, NFS_PORT);
 
-		strncpy(page2, buf->data, page2len);
-		page2[page2len] = '\0';
+		memcpy(page2, buf->data, buf->len);
+		page2[buf->len] = '\0';
 		mountdata->hostname = page2;
 
 		snprintf(page, PAGE_SIZE, "%s:%s",
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index f65953be39c..9250067943d 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2596,6 +2596,7 @@ static nfsd4_enc nfsd4_enc_ops[] = {
 	[OP_LOOKUPP]		= (nfsd4_enc)nfsd4_encode_noop,
 	[OP_NVERIFY]		= (nfsd4_enc)nfsd4_encode_noop,
 	[OP_OPEN]		= (nfsd4_enc)nfsd4_encode_open,
+	[OP_OPENATTR]		= (nfsd4_enc)nfsd4_encode_noop,
 	[OP_OPEN_CONFIRM]	= (nfsd4_enc)nfsd4_encode_open_confirm,
 	[OP_OPEN_DOWNGRADE]	= (nfsd4_enc)nfsd4_encode_open_downgrade,
 	[OP_PUTFH]		= (nfsd4_enc)nfsd4_encode_noop,
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 3a9e5deed74..19e3a96aa02 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -176,7 +176,8 @@ static int ocfs2_dinode_insert_check(struct inode *inode,
 
 	BUG_ON(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL);
 	mlog_bug_on_msg(!ocfs2_sparse_alloc(osb) &&
-			(OCFS2_I(inode)->ip_clusters != rec->e_cpos),
+			(OCFS2_I(inode)->ip_clusters !=
+			 le32_to_cpu(rec->e_cpos)),
 			"Device %s, asking for sparse allocation: inode %llu, "
 			"cpos %u, clusters %u\n",
 			osb->dev_str,
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index a067a6cffb0..8e1709a679b 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -227,7 +227,7 @@ int ocfs2_read_inline_data(struct inode *inode, struct page *page,
 	size = i_size_read(inode);
 
 	if (size > PAGE_CACHE_SIZE ||
-	    size > ocfs2_max_inline_data(inode->i_sb)) {
+	    size > ocfs2_max_inline_data_with_xattr(inode->i_sb, di)) {
 		ocfs2_error(inode->i_sb,
 			    "Inode %llu has with inline data has bad size: %Lu",
 			    (unsigned long long)OCFS2_I(inode)->ip_blkno,
@@ -1555,6 +1555,7 @@ static int ocfs2_try_to_write_inline_data(struct address_space *mapping,
 	int ret, written = 0;
 	loff_t end = pos + len;
 	struct ocfs2_inode_info *oi = OCFS2_I(inode);
+	struct ocfs2_dinode *di = NULL;
 
 	mlog(0, "Inode %llu, write of %u bytes at off %llu. features: 0x%x\n",
 	     (unsigned long long)oi->ip_blkno, len, (unsigned long long)pos,
@@ -1587,7 +1588,9 @@ static int ocfs2_try_to_write_inline_data(struct address_space *mapping,
 	/*
 	 * Check whether the write can fit.
 	 */
-	if (mmap_page || end > ocfs2_max_inline_data(inode->i_sb))
+	di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
+	if (mmap_page ||
+	    end > ocfs2_max_inline_data_with_xattr(inode->i_sb, di))
 		return 0;
 
 do_inline_write:
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 084aba86c3b..4b11762f249 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -532,7 +532,8 @@ static int ocfs2_mknod_locked(struct ocfs2_super *osb,
 
 		fe->i_dyn_features = cpu_to_le16(feat | OCFS2_INLINE_DATA_FL);
 
-		fe->id2.i_data.id_count = cpu_to_le16(ocfs2_max_inline_data(osb->sb));
+		fe->id2.i_data.id_count = cpu_to_le16(
+				ocfs2_max_inline_data_with_xattr(osb->sb, fe));
 	} else {
 		fel = &fe->id2.i_list;
 		fel->l_tree_depth = 0;
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index c7ae45aaa36..2332ef740f4 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -1070,12 +1070,6 @@ static inline int ocfs2_fast_symlink_chars(struct super_block *sb)
 		 offsetof(struct ocfs2_dinode, id2.i_symlink);
 }
 
-static inline int ocfs2_max_inline_data(struct super_block *sb)
-{
-	return sb->s_blocksize -
-		offsetof(struct ocfs2_dinode, id2.i_data.id_data);
-}
-
 static inline int ocfs2_max_inline_data_with_xattr(struct super_block *sb,
 						   struct ocfs2_dinode *di)
 {
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 4ddd788add6..2563df89fc2 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -547,8 +547,12 @@ int ocfs2_calc_xattr_init(struct inode *dir,
 	 * when blocksize = 512, may reserve one more cluser for
 	 * xattr bucket, otherwise reserve one metadata block
 	 * for them is ok.
+	 * If this is a new directory with inline data,
+	 * we choose to reserve the entire inline area for
+	 * directory contents and force an external xattr block.
 	 */
 	if (dir->i_sb->s_blocksize == OCFS2_MIN_BLOCKSIZE ||
+	    (S_ISDIR(mode) && ocfs2_supports_inline_data(osb)) ||
 	    (s_size + a_size) > OCFS2_XATTR_FREE_IN_IBODY) {
 		ret = ocfs2_reserve_new_metadata_blocks(osb, 1, xattr_ac);
 		if (ret) {
@@ -4791,19 +4795,33 @@ static int ocfs2_xattr_bucket_set_value_outside(struct inode *inode,
 						char *val,
 						int value_len)
 {
-	int offset;
+	int ret, offset, block_off;
 	struct ocfs2_xattr_value_root *xv;
 	struct ocfs2_xattr_entry *xe = xs->here;
+	struct ocfs2_xattr_header *xh = bucket_xh(xs->bucket);
+	void *base;
 
 	BUG_ON(!xs->base || !xe || ocfs2_xattr_is_local(xe));
 
-	offset = le16_to_cpu(xe->xe_name_offset) +
-		 OCFS2_XATTR_SIZE(xe->xe_name_len);
+	ret = ocfs2_xattr_bucket_get_name_value(inode, xh,
+						xe - xh->xh_entries,
+						&block_off,
+						&offset);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
 
-	xv = (struct ocfs2_xattr_value_root *)(xs->base + offset);
+	base = bucket_block(xs->bucket, block_off);
+	xv = (struct ocfs2_xattr_value_root *)(base + offset +
+		 OCFS2_XATTR_SIZE(xe->xe_name_len));
 
-	return __ocfs2_xattr_set_value_outside(inode, handle,
-					       xv, val, value_len);
+	ret = __ocfs2_xattr_set_value_outside(inode, handle,
+					      xv, val, value_len);
+	if (ret)
+		mlog_errno(ret);
+out:
+	return ret;
 }
 
 static int ocfs2_rm_xattr_cluster(struct inode *inode,
diff --git a/fs/pipe.c b/fs/pipe.c
index 3a48ba5179d..14f502b89cf 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -699,12 +699,12 @@ pipe_rdwr_fasync(int fd, struct file *filp, int on)
 	int retval;
 
 	mutex_lock(&inode->i_mutex);
-
 	retval = fasync_helper(fd, filp, on, &pipe->fasync_readers);
-
-	if (retval >= 0)
+	if (retval >= 0) {
 		retval = fasync_helper(fd, filp, on, &pipe->fasync_writers);
-
+		if (retval < 0) /* this can happen only if on == T */
+			fasync_helper(-1, filp, 0, &pipe->fasync_readers);
+	}
 	mutex_unlock(&inode->i_mutex);
 
 	if (retval < 0)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 0c9de19a163..beaa0ce3b82 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -3066,7 +3066,6 @@ static int proc_task_readdir(struct file * filp, void * dirent, filldir_t filldi
 	int retval = -ENOENT;
 	ino_t ino;
 	int tid;
-	unsigned long pos = filp->f_pos;  /* avoiding "long long" filp->f_pos */
 	struct pid_namespace *ns;
 
 	task = get_proc_task(inode);
@@ -3083,18 +3082,18 @@ static int proc_task_readdir(struct file * filp, void * dirent, filldir_t filldi
 		goto out_no_task;
 	retval = 0;
 
-	switch (pos) {
+	switch ((unsigned long)filp->f_pos) {
 	case 0:
 		ino = inode->i_ino;
-		if (filldir(dirent, ".", 1, pos, ino, DT_DIR) < 0)
+		if (filldir(dirent, ".", 1, filp->f_pos, ino, DT_DIR) < 0)
 			goto out;
-		pos++;
+		filp->f_pos++;
 		/* fall through */
 	case 1:
 		ino = parent_ino(dentry);
-		if (filldir(dirent, "..", 2, pos, ino, DT_DIR) < 0)
+		if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) < 0)
 			goto out;
-		pos++;
+		filp->f_pos++;
 		/* fall through */
 	}
 
@@ -3104,9 +3103,9 @@ static int proc_task_readdir(struct file * filp, void * dirent, filldir_t filldi
 	ns = filp->f_dentry->d_sb->s_fs_info;
 	tid = (int)filp->f_version;
 	filp->f_version = 0;
-	for (task = first_tid(leader, tid, pos - 2, ns);
+	for (task = first_tid(leader, tid, filp->f_pos - 2, ns);
 	     task;
-	     task = next_tid(task), pos++) {
+	     task = next_tid(task), filp->f_pos++) {
 		tid = task_pid_nr_ns(task, ns);
 		if (proc_task_fill_cache(filp, dirent, filldir, task, tid) < 0) {
 			/* returning this tgid failed, save it as the first
@@ -3117,7 +3116,6 @@ static int proc_task_readdir(struct file * filp, void * dirent, filldir_t filldi
 		}
 	}
 out:
-	filp->f_pos = pos;
 	put_task_struct(leader);
 out_no_task:
 	return retval;
diff --git a/fs/proc/page.c b/fs/proc/page.c
index 2d1345112a4..e9983837d08 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -80,7 +80,7 @@ static const struct file_operations proc_kpagecount_operations = {
 #define KPF_RECLAIM    9
 #define KPF_BUDDY     10
 
-#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
+#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
 
 static ssize_t kpageflags_read(struct file *file, char __user *buf,
 			     size_t count, loff_t *ppos)
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index b9b567a2837..5d7c7ececa6 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -114,6 +114,9 @@ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
 		if (!pagevec_add(&lru_pvec, page))
 			__pagevec_lru_add_file(&lru_pvec);
 
+		/* prevent the page from being discarded on memory pressure */
+		SetPageDirty(page);
+
 		unlock_page(page);
 	}
 
@@ -126,6 +129,7 @@ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
 	return -EFBIG;
 
  add_error:
+	pagevec_lru_add_file(&lru_pvec);
 	page_cache_release(pages + loop);
 	for (loop++; loop < npages; loop++)
 		__free_page(pages + loop);
diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c
index c837dfc2b3c..2a796031034 100644
--- a/fs/squashfs/block.c
+++ b/fs/squashfs/block.c
@@ -80,7 +80,7 @@ static struct buffer_head *get_block_length(struct super_block *sb,
  * generated a larger block - this does occasionally happen with zlib).
  */
 int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
-			int length, u64 *next_index, int srclength)
+			int length, u64 *next_index, int srclength, int pages)
 {
 	struct squashfs_sb_info *msblk = sb->s_fs_info;
 	struct buffer_head **bh;
@@ -184,7 +184,7 @@ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
 				offset = 0;
 			}
 
-			if (msblk->stream.avail_out == 0) {
+			if (msblk->stream.avail_out == 0 && page < pages) {
 				msblk->stream.next_out = buffer[page++];
 				msblk->stream.avail_out = PAGE_CACHE_SIZE;
 			}
@@ -201,25 +201,20 @@ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
 				zlib_init = 1;
 			}
 
-			zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH);
+			zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
 
 			if (msblk->stream.avail_in == 0 && k < b)
 				put_bh(bh[k++]);
 		} while (zlib_err == Z_OK);
 
 		if (zlib_err != Z_STREAM_END) {
-			ERROR("zlib_inflate returned unexpected result"
-				" 0x%x, srclength %d, avail_in %d,"
-				" avail_out %d\n", zlib_err, srclength,
-				msblk->stream.avail_in,
-				msblk->stream.avail_out);
+			ERROR("zlib_inflate error, data probably corrupt\n");
 			goto release_mutex;
 		}
 
 		zlib_err = zlib_inflateEnd(&msblk->stream);
 		if (zlib_err != Z_OK) {
-			ERROR("zlib_inflateEnd returned unexpected result 0x%x,"
-				" srclength %d\n", zlib_err, srclength);
+			ERROR("zlib_inflate error, data probably corrupt\n");
 			goto release_mutex;
 		}
 		length = msblk->stream.total_out;
@@ -268,7 +263,8 @@ block_release:
 		put_bh(bh[k]);
 
 read_failure:
-	ERROR("sb_bread failed reading block 0x%llx\n", cur_index);
+	ERROR("squashfs_read_data failed to read block 0x%llx\n",
+					(unsigned long long) index);
 	kfree(bh);
 	return -EIO;
 }
diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index f29eda16d25..1c4739e33af 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -119,7 +119,7 @@ struct squashfs_cache_entry *squashfs_cache_get(struct super_block *sb,
 
 			entry->length = squashfs_read_data(sb, entry->data,
 				block, length, &entry->next_index,
-				cache->block_size);
+				cache->block_size, cache->pages);
 
 			spin_lock(&cache->lock);
 
@@ -406,7 +406,7 @@ int squashfs_read_table(struct super_block *sb, void *buffer, u64 block,
 	for (i = 0; i < pages; i++, buffer += PAGE_CACHE_SIZE)
 		data[i] = buffer;
 	res = squashfs_read_data(sb, data, block, length |
-		SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length);
+		SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length, pages);
 	kfree(data);
 	return res;
 }
diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c
index 7a63398bb85..9101dbde39e 100644
--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -133,7 +133,8 @@ int squashfs_read_inode(struct inode *inode, long long ino)
 	type = le16_to_cpu(sqshb_ino->inode_type);
 	switch (type) {
 	case SQUASHFS_REG_TYPE: {
-		unsigned int frag_offset, frag_size, frag;
+		unsigned int frag_offset, frag;
+		int frag_size;
 		u64 frag_blk;
 		struct squashfs_reg_inode *sqsh_ino = &squashfs_ino.reg;
 
@@ -175,7 +176,8 @@ int squashfs_read_inode(struct inode *inode, long long ino)
 		break;
 	}
 	case SQUASHFS_LREG_TYPE: {
-		unsigned int frag_offset, frag_size, frag;
+		unsigned int frag_offset, frag;
+		int frag_size;
 		u64 frag_blk;
 		struct squashfs_lreg_inode *sqsh_ino = &squashfs_ino.lreg;
 
diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h
index 6b2515d027d..0e9feb6adf7 100644
--- a/fs/squashfs/squashfs.h
+++ b/fs/squashfs/squashfs.h
@@ -34,7 +34,7 @@ static inline struct squashfs_inode_info *squashfs_i(struct inode *inode)
 
 /* block.c */
 extern int squashfs_read_data(struct super_block *, void **, u64, int, u64 *,
-				int);
+				int, int);
 
 /* cache.c */
 extern struct squashfs_cache *squashfs_cache_init(char *, int, int);
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 071df5b5b49..681ec0d8379 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -389,7 +389,7 @@ static int __init init_squashfs_fs(void)
 		return err;
 	}
 
-	printk(KERN_INFO "squashfs: version 4.0 (2009/01/03) "
+	printk(KERN_INFO "squashfs: version 4.0 (2009/01/31) "
 		"Phillip Lougher\n");
 
 	return 0;
diff --git a/fs/super.c b/fs/super.c
index 8349ed6b141..6ce501447ad 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -371,8 +371,10 @@ retry:
 				continue;
 			if (!grab_super(old))
 				goto retry;
-			if (s)
+			if (s) {
+				up_write(&s->s_umount);
 				destroy_super(s);
+			}
 			return old;
 		}
 	}
@@ -387,6 +389,7 @@ retry:
 	err = set(s, data);
 	if (err) {
 		spin_unlock(&sb_lock);
+		up_write(&s->s_umount);
 		destroy_super(s);
 		return ERR_PTR(err);
 	}
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index e65212dfb60..261a1c2f22d 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -41,7 +41,7 @@
  * Stefan Reinauer <stepan@home.culture.mipt.ru>
  *
  * Module usage counts added on 96/04/29 by
- * Gertjan van Wingerde <gertjan@cs.vu.nl>
+ * Gertjan van Wingerde <gwingerde@gmail.com>
  *
  * Clean swab support on 19970406 by
  * Francois-Rene Rideau <fare@tunes.org>
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index cb329edc925..aa1016bb913 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -34,6 +34,12 @@
 #include <linux/backing-dev.h>
 #include <linux/freezer.h>
 
+#include "xfs_sb.h"
+#include "xfs_inum.h"
+#include "xfs_ag.h"
+#include "xfs_dmapi.h"
+#include "xfs_mount.h"
+
 static kmem_zone_t *xfs_buf_zone;
 STATIC int xfsbufd(void *);
 STATIC int xfsbufd_wakeup(int, gfp_t);
@@ -1435,10 +1441,12 @@ xfs_unregister_buftarg(
 
 void
 xfs_free_buftarg(
-	xfs_buftarg_t		*btp)
+	struct xfs_mount	*mp,
+	struct xfs_buftarg	*btp)
 {
 	xfs_flush_buftarg(btp, 1);
-	xfs_blkdev_issue_flush(btp);
+	if (mp->m_flags & XFS_MOUNT_BARRIER)
+		xfs_blkdev_issue_flush(btp);
 	xfs_free_bufhash(btp);
 	iput(btp->bt_mapping->host);
 
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 288ae7c4c80..9b4d666ad31 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -413,7 +413,7 @@ static inline int XFS_bwrite(xfs_buf_t *bp)
  *	Handling of buftargs.
  */
 extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int);
-extern void xfs_free_buftarg(xfs_buftarg_t *);
+extern void xfs_free_buftarg(struct xfs_mount *, struct xfs_buftarg *);
 extern void xfs_wait_buftarg(xfs_buftarg_t *);
 extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int);
 extern int xfs_flush_buftarg(xfs_buftarg_t *, int);
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index c71e226da7f..32ae5028e96 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -734,15 +734,15 @@ xfs_close_devices(
 {
 	if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
 		struct block_device *logdev = mp->m_logdev_targp->bt_bdev;
-		xfs_free_buftarg(mp->m_logdev_targp);
+		xfs_free_buftarg(mp, mp->m_logdev_targp);
 		xfs_blkdev_put(logdev);
 	}
 	if (mp->m_rtdev_targp) {
 		struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev;
-		xfs_free_buftarg(mp->m_rtdev_targp);
+		xfs_free_buftarg(mp, mp->m_rtdev_targp);
 		xfs_blkdev_put(rtdev);
 	}
-	xfs_free_buftarg(mp->m_ddev_targp);
+	xfs_free_buftarg(mp, mp->m_ddev_targp);
 }
 
 /*
@@ -811,9 +811,9 @@ xfs_open_devices(
 
  out_free_rtdev_targ:
 	if (mp->m_rtdev_targp)
-		xfs_free_buftarg(mp->m_rtdev_targp);
+		xfs_free_buftarg(mp, mp->m_rtdev_targp);
  out_free_ddev_targ:
-	xfs_free_buftarg(mp->m_ddev_targp);
+	xfs_free_buftarg(mp, mp->m_ddev_targp);
  out_close_rtdev:
 	if (rtdev)
 		xfs_blkdev_put(rtdev);
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index e2fb6210d4c..478e587087f 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -246,9 +246,6 @@ xfs_iget_cache_miss(
 		goto out_destroy;
 	}
 
-	if (lock_flags)
-		xfs_ilock(ip, lock_flags);
-
 	/*
 	 * Preload the radix tree so we can insert safely under the
 	 * write spinlock. Note that we cannot sleep inside the preload
@@ -256,7 +253,16 @@ xfs_iget_cache_miss(
 	 */
 	if (radix_tree_preload(GFP_KERNEL)) {
 		error = EAGAIN;
-		goto out_unlock;
+		goto out_destroy;
+	}
+
+	/*
+	 * Because the inode hasn't been added to the radix-tree yet it can't
+	 * be found by another thread, so we can do the non-sleeping lock here.
+	 */
+	if (lock_flags) {
+		if (!xfs_ilock_nowait(ip, lock_flags))
+			BUG();
 	}
 
 	mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
@@ -284,7 +290,6 @@ xfs_iget_cache_miss(
 out_preload_end:
 	write_unlock(&pag->pag_ici_lock);
 	radix_tree_preload_end();
-out_unlock:
 	if (lock_flags)
 		xfs_iunlock(ip, lock_flags);
 out_destroy:
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index b1047de2fff..61af610d79b 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1455,10 +1455,19 @@ xlog_recover_add_to_trans(
 	item = item->ri_prev;
 
 	if (item->ri_total == 0) {		/* first region to be added */
-		item->ri_total	= in_f->ilf_size;
-		ASSERT(item->ri_total <= XLOG_MAX_REGIONS_IN_ITEM);
-		item->ri_buf = kmem_zalloc((item->ri_total *
-					    sizeof(xfs_log_iovec_t)), KM_SLEEP);
+		if (in_f->ilf_size == 0 ||
+		    in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) {
+			xlog_warn(
+	"XFS: bad number of regions (%d) in inode log format",
+				  in_f->ilf_size);
+			ASSERT(0);
+			return XFS_ERROR(EIO);
+		}
+
+		item->ri_total = in_f->ilf_size;
+		item->ri_buf =
+			kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t),
+				    KM_SLEEP);
 	}
 	ASSERT(item->ri_total > item->ri_cnt);
 	/* Description region is ri_buf[0] */
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index ff8d27af478..a11cc9d3259 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -69,8 +69,8 @@ struct detailed_pixel_timing {
 	u8 hborder;
 	u8 vborder;
 	u8 unknown0:1;
-	u8 vsync_positive:1;
 	u8 hsync_positive:1;
+	u8 vsync_positive:1;
 	u8 separate_sync:2;
 	u8 stereo:1;
 	u8 unknown6:1;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 08a86d5cdf1..9a061accd8b 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -89,6 +89,8 @@ enum {
 	ATA_ID_DLF		= 128,
 	ATA_ID_CSFO		= 129,
 	ATA_ID_CFA_POWER	= 160,
+	ATA_ID_CFA_KEY_MGMT	= 162,
+	ATA_ID_CFA_MODES	= 163,
 	ATA_ID_ROT_SPEED	= 217,
 	ATA_ID_PIO4		= (1 << 1),
 
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 1b16108a541..d8bd43bfdcf 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -531,7 +531,7 @@ extern void bio_integrity_endio(struct bio *, int);
 extern void bio_integrity_advance(struct bio *, unsigned int);
 extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
 extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
-extern int bio_integrity_clone(struct bio *, struct bio *, struct bio_set *);
+extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
 extern int bioset_integrity_create(struct bio_set *, int);
 extern void bioset_integrity_free(struct bio_set *);
 extern void bio_integrity_init_slab(void);
@@ -542,7 +542,7 @@ extern void bio_integrity_init_slab(void);
 #define bioset_integrity_create(a, b)	(0)
 #define bio_integrity_prep(a)		(0)
 #define bio_integrity_enabled(a)	(0)
-#define bio_integrity_clone(a, b, c)	(0)
+#define bio_integrity_clone(a, b, c,d )	(0)
 #define bioset_integrity_free(a)	do { } while (0)
 #define bio_integrity_free(a, b)	do { } while (0)
 #define bio_integrity_endio(a, b)	do { } while (0)
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 1b987255613..4864a43b2b4 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -393,8 +393,10 @@ struct cpu_vfs_cap_data {
 # define CAP_FULL_SET     ((kernel_cap_t){{ ~0, ~0 }})
 # define CAP_INIT_EFF_SET ((kernel_cap_t){{ ~CAP_TO_MASK(CAP_SETPCAP), ~0 }})
 # define CAP_FS_SET       ((kernel_cap_t){{ CAP_FS_MASK_B0, CAP_FS_MASK_B1 } })
-# define CAP_NFSD_SET     ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \
-					CAP_FS_MASK_B1 } })
+# define CAP_NFSD_SET     ((kernel_cap_t){{ CAP_FS_MASK_B0 \
+					    | CAP_TO_MASK(CAP_SYS_RESOURCE) \
+					    | CAP_TO_MASK(CAP_MKNOD), \
+					    CAP_FS_MASK_B1 } })
 
 #endif /* _KERNEL_CAPABILITY_U32S != 2 */
 
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 1514d534dee..a3ed7cb8ca3 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -52,7 +52,15 @@
 #define __deprecated			__attribute__((deprecated))
 #define __packed			__attribute__((packed))
 #define __weak				__attribute__((weak))
-#define __naked				__attribute__((naked))
+
+/*
+ * it doesn't make sense on ARM (currently the only user of __naked) to trace
+ * naked functions because then mcount is called without stack and frame pointer
+ * being set up and there is no chance to restore the lr register to the value
+ * before mcount was called.
+ */
+#define __naked				__attribute__((naked)) notrace
+
 #define __noreturn			__attribute__((noreturn))
 
 /*
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 384b38d3e8e..161042746af 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -234,7 +234,6 @@ struct cpufreq_driver {
 	int	(*suspend)	(struct cpufreq_policy *policy, pm_message_t pmsg);
 	int	(*resume)	(struct cpufreq_policy *policy);
 	struct freq_attr	**attr;
-	bool			hide_interface;
 };
 
 /* flags */
diff --git a/include/linux/dca.h b/include/linux/dca.h
index b00a753eda5..9c20c7e87d0 100644
--- a/include/linux/dca.h
+++ b/include/linux/dca.h
@@ -1,3 +1,23 @@
+/*
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
 #ifndef DCA_H
 #define DCA_H
 /* DCA Provider API */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index f0413845f20..1956c8d46d3 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -97,7 +97,6 @@ typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t;
 
 /**
  * struct dma_chan_percpu - the per-CPU part of struct dma_chan
- * @refcount: local_t used for open-coded "bigref" counting
  * @memcpy_count: transaction counter
  * @bytes_transferred: byte counter
  */
@@ -114,9 +113,6 @@ struct dma_chan_percpu {
  * @cookie: last cookie value returned to client
  * @chan_id: channel ID for sysfs
  * @dev: class device for sysfs
- * @refcount: kref, used in "bigref" slow-mode
- * @slow_ref: indicates that the DMA channel is free
- * @rcu: the DMA channel's RCU head
  * @device_node: used to add this to the device chan list
  * @local: per-cpu pointer to a struct dma_chan_percpu
  * @client-count: how many clients are using this channel
@@ -213,8 +209,6 @@ struct dma_async_tx_descriptor {
  * @global_node: list_head for global dma_device_list
  * @cap_mask: one or more dma_capability flags
  * @max_xor: maximum number of xor sources, 0 if no capability
- * @refcount: reference count
- * @done: IO completion struct
  * @dev_id: unique device ID
  * @dev: struct device reference for dma mapping api
  * @device_alloc_chan_resources: allocate resources and return the
@@ -227,6 +221,7 @@ struct dma_async_tx_descriptor {
  * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
  * @device_prep_slave_sg: prepares a slave dma operation
  * @device_terminate_all: terminate all pending operations
+ * @device_is_tx_complete: poll for transaction completion
  * @device_issue_pending: push pending transactions to hardware
  */
 struct dma_device {
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index c37e9241fae..ed21bd3dbd2 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h
@@ -511,7 +511,6 @@ struct hd_driveid {
 	unsigned short	words69_70[2];	/* reserved words 69-70
 					 * future command overlap and queuing
 					 */
-	/* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
 	unsigned short	words71_74[4];	/* reserved words 71-74
 					 * for IDENTIFY PACKET DEVICE command
 					 */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index fe235b65207..25087aead65 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -797,6 +797,7 @@ typedef struct hwif_s {
 	struct scatterlist *sg_table;
 	int sg_max_nents;		/* Maximum number of entries in it */
 	int sg_nents;			/* Current number of entries in it */
+	int orig_sg_nents;
 	int sg_dma_direction;		/* dma transfer direction */
 
 	/* data phase of the active command (currently only valid for PIO/DMA) */
@@ -866,6 +867,7 @@ struct ide_host {
 	unsigned int	n_ports;
 	struct device	*dev[2];
 	unsigned int	(*init_chipset)(struct pci_dev *);
+	irq_handler_t	irq_handler;
 	unsigned long	host_flags;
 	void		*host_priv;
 	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5d87bc09a1f..dc18b87ed72 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -275,7 +275,7 @@ enum {
 	 * advised to wait only for the following duration before
 	 * doing SRST.
 	 */
-	ATA_TMOUT_PMP_SRST_WAIT	= 1000,
+	ATA_TMOUT_PMP_SRST_WAIT	= 5000,
 
 	/* ATA bus states */
 	BUS_UNKNOWN		= 0,
@@ -530,6 +530,7 @@ struct ata_queued_cmd {
 	unsigned long		flags;		/* ATA_QCFLAG_xxx */
 	unsigned int		tag;
 	unsigned int		n_elem;
+	unsigned int		orig_n_elem;
 
 	int			dma_dir;
 
@@ -750,7 +751,8 @@ struct ata_port {
 	acpi_handle		acpi_handle;
 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
 #endif
-	u8			sector_buf[ATA_SECT_SIZE]; /* owned by EH */
+	/* owned by EH */
+	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
 };
 
 /* The following initializer overrides a method to NULL whether one of
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index aa6fe7026de..51855dfd8ad 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -346,6 +346,7 @@ static inline int __nlm_cmp_addr4(const struct sockaddr *sap1,
 	return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr;
 }
 
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
 				  const struct sockaddr *sap2)
 {
@@ -353,6 +354,13 @@ static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
 	const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2;
 	return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr);
 }
+#else	/* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
+				  const struct sockaddr *sap2)
+{
+	return 0;
+}
+#endif	/* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
 
 /*
  * Compare two host addresses
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 92915e81443..d84feb7bdbf 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -276,4 +276,7 @@ struct mm_struct {
 #endif
 };
 
+/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */
+#define mm_cpumask(mm) (&(mm)->cpu_vm_mask)
+
 #endif /* _LINUX_MM_TYPES_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index ec54785d34f..659366734f3 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1079,6 +1079,7 @@ extern void		synchronize_net(void);
 extern int 		register_netdevice_notifier(struct notifier_block *nb);
 extern int		unregister_netdevice_notifier(struct notifier_block *nb);
 extern int		init_dummy_netdev(struct net_device *dev);
+extern void		netdev_resync_ops(struct net_device *dev);
 
 extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
 extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index a550b528319..2e5f00066af 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -406,6 +406,8 @@ struct nfs3_setaclargs {
 	int			mask;
 	struct posix_acl *	acl_access;
 	struct posix_acl *	acl_default;
+	size_t			len;
+	unsigned int		npages;
 	struct page **		pages;
 };
 
diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h
index 54487a99beb..43011b69297 100644
--- a/include/linux/nfsacl.h
+++ b/include/linux/nfsacl.h
@@ -37,6 +37,9 @@
 #define NFSACL_MAXPAGES		((2*(8+12*NFS_ACL_MAX_ENTRIES) + PAGE_SIZE-1) \
 				 >> PAGE_SHIFT)
 
+#define NFS_ACL_MAX_ENTRIES_INLINE	(5)
+#define NFS_ACL_INLINE_BUFSIZE	((2*(2+3*NFS_ACL_MAX_ENTRIES_INLINE)) << 2)
+
 static inline unsigned int
 nfsacl_size(struct posix_acl *acl_access, struct posix_acl *acl_default)
 {
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8c216e057c9..011db2f4c94 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1419,6 +1419,9 @@ struct task_struct {
 #endif
 };
 
+/* Future-safe accessor for struct task_struct's cpus_allowed. */
+#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed)
+
 /*
  * Priority of a process goes from 0..MAX_PRIO-1, valid RT
  * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 1bcb357a01a..e0417e4d3f1 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -212,7 +212,7 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_FUJITSU	0x35
 #define SERIO_ZHENHUA	0x36
 #define SERIO_INEXIO	0x37
-#define SERIO_TOUCHIT213	0x37
+#define SERIO_TOUCHIT213	0x38
 #define SERIO_W8001	0x39
 
 #endif
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 6fc13d905c5..ded434b032a 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -109,11 +109,6 @@ extern struct list_head net_namespace_list;
 #ifdef CONFIG_NET_NS
 extern void __put_net(struct net *net);
 
-static inline int net_alive(struct net *net)
-{
-	return net && atomic_read(&net->count);
-}
-
 static inline struct net *get_net(struct net *net)
 {
 	atomic_inc(&net->count);
@@ -145,11 +140,6 @@ int net_eq(const struct net *net1, const struct net *net2)
 }
 #else
 
-static inline int net_alive(struct net *net)
-{
-	return 1;
-}
-
 static inline struct net *get_net(struct net *net)
 {
 	return net;
@@ -234,6 +224,23 @@ struct pernet_operations {
 	void (*exit)(struct net *net);
 };
 
+/*
+ * Use these carefully.  If you implement a network device and it
+ * needs per network namespace operations use device pernet operations,
+ * otherwise use pernet subsys operations.
+ *
+ * This is critically important.  Most of the network code cleanup
+ * runs with the assumption that dev_remove_pack has been called so no
+ * new packets will arrive during and after the cleanup functions have
+ * been called.  dev_remove_pack is not per namespace so instead the
+ * guarantee of no more packets arriving in a network namespace is
+ * provided by ensuring that all network devices and all sockets have
+ * left the network namespace before the cleanup methods are called.
+ *
+ * For the longest time the ipv4 icmp code was registered as a pernet
+ * device which caused kernel oops, and panics during network
+ * namespace cleanup.   So please don't get this wrong.
+ */
 extern int register_pernet_subsys(struct pernet_operations *);
 extern void unregister_pernet_subsys(struct pernet_operations *);
 extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h
index c25068e3851..5a449b44ba3 100644
--- a/include/net/netfilter/nf_conntrack_core.h
+++ b/include/net/netfilter/nf_conntrack_core.h
@@ -62,7 +62,8 @@ static inline int nf_conntrack_confirm(struct sk_buff *skb)
 	if (ct && ct != &nf_conntrack_untracked) {
 		if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
 			ret = __nf_conntrack_confirm(skb);
-		nf_ct_deliver_cached_events(ct);
+		if (likely(ret == NF_ACCEPT))
+			nf_ct_deliver_cached_events(ct);
 	}
 	return ret;
 }
diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h
index 57aaa8f0d61..f271d9cc0fc 100644
--- a/include/scsi/fc/fc_fcoe.h
+++ b/include/scsi/fc/fc_fcoe.h
@@ -31,10 +31,6 @@
 #define	ETH_P_FCOE	0x8906		/* FCOE ether type */
 #endif
 
-#ifndef ETH_P_8021Q
-#define	ETH_P_8021Q	0x8100
-#endif
-
 /*
  * FC_FCOE_OUI hasn't been standardized yet.   XXX TBD.
  */
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
index 3e4801d2bdb..1b7af3a64c7 100644
--- a/include/scsi/fc/fc_fs.h
+++ b/include/scsi/fc/fc_fs.h
@@ -337,4 +337,9 @@ enum fc_pf_rjt_reason {
 	FC_RJT_VENDOR =		0xff,	/* vendor specific reject */
 };
 
+/* default timeout values */
+
+#define FC_DEF_E_D_TOV	2000UL
+#define FC_DEF_R_A_TOV	10000UL
+
 #endif /* _FC_FS_H_ */
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 9f2876397dd..a2e126b86e3 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -68,9 +68,6 @@
 /*
  * FC HBA status
  */
-#define FC_PAUSE		    (1 << 1)
-#define FC_LINK_UP		    (1 << 0)
-
 enum fc_lport_state {
 	LPORT_ST_NONE = 0,
 	LPORT_ST_FLOGI,
@@ -339,31 +336,17 @@ struct fc_exch {
 
 struct libfc_function_template {
 
-	/**
-	 * Mandatory Fields
-	 *
-	 * These handlers must be implemented by the LLD.
-	 */
-
 	/*
 	 * Interface to send a FC frame
-	 */
-	int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp);
-
-	/**
-	 * Optional Fields
 	 *
-	 * The LLD may choose to implement any of the following handlers.
-	 * If LLD doesn't specify hander and leaves its pointer NULL then
-	 * the default libfc function will be used for that handler.
-	 */
-
-	/**
-	 * ELS/CT interfaces
+	 * STATUS: REQUIRED
 	 */
+	int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp);
 
 	/*
-	 * elsct_send - sends ELS/CT frame
+	 * Interface to send ELS/CT frames
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	struct fc_seq *(*elsct_send)(struct fc_lport *lport,
 				     struct fc_rport *rport,
@@ -373,9 +356,6 @@ struct libfc_function_template {
 					     struct fc_frame *fp,
 					     void *arg),
 				     void *arg, u32 timer_msec);
-	/**
-	 * Exhance Manager interfaces
-	 */
 
 	/*
 	 * Send the FC frame payload using a new exchange and sequence.
@@ -407,6 +387,8 @@ struct libfc_function_template {
 	 * timer_msec argument is specified. The timer is canceled when
 	 * it fires or when the exchange is done. The exchange timeout handler
 	 * is registered by EM layer.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	struct fc_seq *(*exch_seq_send)(struct fc_lport *lp,
 					struct fc_frame *fp,
@@ -418,14 +400,18 @@ struct libfc_function_template {
 					void *arg, unsigned int timer_msec);
 
 	/*
-	 * send a frame using existing sequence and exchange.
+	 * Send a frame using an existing sequence and exchange.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp,
 			struct fc_frame *fp);
 
 	/*
-	 * Send ELS response using mainly infomation
-	 * in exchange and sequence in EM layer.
+	 * Send an ELS response using infomation from a previous
+	 * exchange and sequence.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd,
 				 struct fc_seq_els_data *els_data);
@@ -437,6 +423,8 @@ struct libfc_function_template {
 	 * A timer_msec can be specified for abort timeout, if non-zero
 	 * timer_msec value is specified then exchange resp handler
 	 * will be called with timeout error if no response to abort.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	int (*seq_exch_abort)(const struct fc_seq *req_sp,
 			      unsigned int timer_msec);
@@ -444,6 +432,8 @@ struct libfc_function_template {
 	/*
 	 * Indicate that an exchange/sequence tuple is complete and the memory
 	 * allocated for the related objects may be freed.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*exch_done)(struct fc_seq *sp);
 
@@ -451,6 +441,8 @@ struct libfc_function_template {
 	 * Assigns a EM and a free XID for an new exchange and then
 	 * allocates a new exchange and sequence pair.
 	 * The fp can be used to determine free XID.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp);
 
@@ -458,12 +450,16 @@ struct libfc_function_template {
 	 * Release previously assigned XID by exch_get API.
 	 * The LLD may implement this if XID is assigned by LLD
 	 * in exch_get().
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp,
 			 u16 ex_id);
 
 	/*
 	 * Start a new sequence on the same exchange/sequence tuple.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	struct fc_seq *(*seq_start_next)(struct fc_seq *sp);
 
@@ -471,26 +467,38 @@ struct libfc_function_template {
 	 * Reset an exchange manager, completing all sequences and exchanges.
 	 * If s_id is non-zero, reset only exchanges originating from that FID.
 	 * If d_id is non-zero, reset only exchanges sending to that FID.
+	 *
+	 * STATUS: OPTIONAL
 	 */
-	void (*exch_mgr_reset)(struct fc_exch_mgr *,
+	void (*exch_mgr_reset)(struct fc_lport *,
 			       u32 s_id, u32 d_id);
 
-	void (*rport_flush_queue)(void);
-	/**
-	 * Local Port interfaces
+	/*
+	 * Flush the rport work queue. Generally used before shutdown.
+	 *
+	 * STATUS: OPTIONAL
 	 */
+	void (*rport_flush_queue)(void);
 
 	/*
-	 * Receive a frame to a local port.
+	 * Receive a frame for a local port.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp,
 			   struct fc_frame *fp);
 
+	/*
+	 * Reset the local port.
+	 *
+	 * STATUS: OPTIONAL
+	 */
 	int (*lport_reset)(struct fc_lport *);
 
-	/**
-	 * Remote Port interfaces
+	/*
+	 * Create a remote port
 	 */
+	struct fc_rport *(*rport_create)(struct fc_disc_port *);
 
 	/*
 	 * Initiates the RP state machine. It is called from the LP module.
@@ -500,26 +508,33 @@ struct libfc_function_template {
 	 * - PLOGI
 	 * - PRLI
 	 * - RTV
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	int (*rport_login)(struct fc_rport *rport);
 
 	/*
 	 * Logoff, and remove the rport from the transport if
 	 * it had been added. This will send a LOGO to the target.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	int (*rport_logoff)(struct fc_rport *rport);
 
 	/*
 	 * Recieve a request from a remote port.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*rport_recv_req)(struct fc_seq *, struct fc_frame *,
 			       struct fc_rport *);
 
-	struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32);
-
-	/**
-	 * FCP interfaces
+	/*
+	 * lookup an rport by it's port ID.
+	 *
+	 * STATUS: OPTIONAL
 	 */
+	struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32);
 
 	/*
 	 * Send a fcp cmd from fsp pkt.
@@ -527,30 +542,38 @@ struct libfc_function_template {
 	 *
 	 * The resp handler is called when FCP_RSP received.
 	 *
+	 * STATUS: OPTIONAL
 	 */
 	int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
 			    void (*resp)(struct fc_seq *, struct fc_frame *fp,
 					 void *arg));
 
 	/*
-	 * Used at least durring linkdown and reset
+	 * Cleanup the FCP layer, used durring link down and reset
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*fcp_cleanup)(struct fc_lport *lp);
 
 	/*
 	 * Abort all I/O on a local port
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*fcp_abort_io)(struct fc_lport *lp);
 
-	/**
-	 * Discovery interfaces
+	/*
+	 * Receive a request for the discovery layer.
+	 *
+	 * STATUS: OPTIONAL
 	 */
-
 	void (*disc_recv_req)(struct fc_seq *,
 			      struct fc_frame *, struct fc_lport *);
 
 	/*
 	 * Start discovery for a local port.
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*disc_start)(void (*disc_callback)(struct fc_lport *,
 						 enum fc_disc_event),
@@ -559,6 +582,8 @@ struct libfc_function_template {
 	/*
 	 * Stop discovery for a given lport. This will remove
 	 * all discovered rports
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*disc_stop) (struct fc_lport *);
 
@@ -566,6 +591,8 @@ struct libfc_function_template {
 	 * Stop discovery for a given lport. This will block
 	 * until all discovered rports are deleted from the
 	 * FC transport class
+	 *
+	 * STATUS: OPTIONAL
 	 */
 	void (*disc_stop_final) (struct fc_lport *);
 };
@@ -603,7 +630,8 @@ struct fc_lport {
 
 	/* Operational Information */
 	struct libfc_function_template tt;
-	u16			link_status;
+	u8			link_up;
+	u8			qfull;
 	enum fc_lport_state	state;
 	unsigned long		boot_time;
 
@@ -637,7 +665,7 @@ struct fc_lport {
 	struct delayed_work	disc_work;
 };
 
-/**
+/*
  * FC_LPORT HELPER FUNCTIONS
  *****************************/
 static inline void *lport_priv(const struct fc_lport *lp)
@@ -669,7 +697,7 @@ static inline void fc_lport_state_enter(struct fc_lport *lp,
 }
 
 
-/**
+/*
  * LOCAL PORT LAYER
  *****************************/
 int fc_lport_init(struct fc_lport *lp);
@@ -704,12 +732,6 @@ void fc_linkup(struct fc_lport *);
 void fc_linkdown(struct fc_lport *);
 
 /*
- * Pause and unpause traffic.
- */
-void fc_pause(struct fc_lport *);
-void fc_unpause(struct fc_lport *);
-
-/*
  * Configure the local port.
  */
 int fc_lport_config(struct fc_lport *);
@@ -725,19 +747,19 @@ int fc_lport_reset(struct fc_lport *);
 int fc_set_mfs(struct fc_lport *lp, u32 mfs);
 
 
-/**
+/*
  * REMOTE PORT LAYER
  *****************************/
 int fc_rport_init(struct fc_lport *lp);
 void fc_rport_terminate_io(struct fc_rport *rp);
 
-/**
+/*
  * DISCOVERY LAYER
  *****************************/
 int fc_disc_init(struct fc_lport *lp);
 
 
-/**
+/*
  * SCSI LAYER
  *****************************/
 /*
@@ -798,7 +820,7 @@ int fc_change_queue_type(struct scsi_device *sdev, int tag_type);
  */
 void fc_fcp_destroy(struct fc_lport *);
 
-/**
+/*
  * ELS/CT interface
  *****************************/
 /*
@@ -807,7 +829,7 @@ void fc_fcp_destroy(struct fc_lport *);
 int fc_elsct_init(struct fc_lport *lp);
 
 
-/**
+/*
  * EXCHANGE MANAGER LAYER
  *****************************/
 /*
@@ -916,7 +938,7 @@ struct fc_seq *fc_seq_start_next(struct fc_seq *sp);
  * If s_id is non-zero, reset only exchanges originating from that FID.
  * If d_id is non-zero, reset only exchanges sending to that FID.
  */
-void fc_exch_mgr_reset(struct fc_exch_mgr *, u32 s_id, u32 d_id);
+void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
 
 /*
  * Functions for fc_functions_template
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 89fdbb9a6a1..941818f29f5 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -46,6 +46,7 @@ struct fcoe_softc {
 	struct net_device *phys_dev;		/* device with ethtool_ops */
 	struct packet_type  fcoe_packet_type;
 	struct sk_buff_head fcoe_pending_queue;
+	u8	fcoe_pending_queue_active;
 
 	u8 dest_addr[ETH_ALEN];
 	u8 ctl_src_addr[ETH_ALEN];
@@ -58,16 +59,10 @@ struct fcoe_softc {
 	u8 address_mode;
 };
 
-static inline struct fcoe_softc *fcoe_softc(
-	const struct fc_lport *lp)
-{
-	return (struct fcoe_softc *)lport_priv(lp);
-}
-
 static inline struct net_device *fcoe_netdev(
 	const struct fc_lport *lp)
 {
-	return fcoe_softc(lp)->real_dev;
+	return ((struct fcoe_softc *)lport_priv(lp))->real_dev;
 }
 
 static inline struct fcoe_hdr *skb_fcoe_header(const struct sk_buff *skb)
diff --git a/include/video/broadsheetfb.h b/include/video/broadsheetfb.h
new file mode 100644
index 00000000000..a758534c027
--- /dev/null
+++ b/include/video/broadsheetfb.h
@@ -0,0 +1,59 @@
+/*
+ * broadsheetfb.h - definitions for the broadsheet framebuffer driver
+ *
+ * Copyright (C) 2008 by Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#ifndef _LINUX_BROADSHEETFB_H_
+#define _LINUX_BROADSHEETFB_H_
+
+/* Broadsheet command defines */
+#define BS_CMD_INIT_SYS_RUN	0x06
+#define BS_CMD_INIT_DSPE_CFG	0x09
+#define BS_CMD_INIT_DSPE_TMG	0x0A
+#define BS_CMD_INIT_ROTMODE	0x0B
+#define BS_CMD_RD_REG		0x10
+#define BS_CMD_WR_REG		0x11
+#define BS_CMD_LD_IMG		0x20
+#define BS_CMD_LD_IMG_AREA	0x22
+#define BS_CMD_LD_IMG_END	0x23
+#define BS_CMD_WAIT_DSPE_TRG	0x28
+#define BS_CMD_WAIT_DSPE_FREND	0x29
+#define BS_CMD_RD_WFM_INFO	0x30
+#define BS_CMD_UPD_INIT		0x32
+#define BS_CMD_UPD_FULL		0x33
+#define BS_CMD_UPD_GDRV_CLR	0x37
+
+/* Broadsheet pin interface specific defines */
+#define BS_CS	0x01
+#define BS_DC 	0x02
+#define BS_WR 	0x03
+
+/* struct used by broadsheet. board specific stuff comes from *board */
+struct broadsheetfb_par {
+	struct fb_info *info;
+	struct broadsheet_board *board;
+	void (*write_reg)(struct broadsheetfb_par *, u16 reg, u16 val);
+	u16 (*read_reg)(struct broadsheetfb_par *, u16 reg);
+	wait_queue_head_t waitq;
+};
+
+/* board specific routines */
+struct broadsheet_board {
+	struct module *owner;
+	int (*init)(struct broadsheetfb_par *);
+	int (*wait_for_rdy)(struct broadsheetfb_par *);
+	void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
+	void (*set_hdb)(struct broadsheetfb_par *, u16);
+	u16 (*get_hdb)(struct broadsheetfb_par *);
+	void (*cleanup)(struct broadsheetfb_par *);
+	int (*get_panel_type)(void);
+	int (*setup_irq)(struct fb_info *);
+};
+
+#endif
diff --git a/init/Kconfig b/init/Kconfig
index f068071fcc5..6a5c5fed66c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -675,6 +675,9 @@ config CC_OPTIMIZE_FOR_SIZE
 config SYSCTL
 	bool
 
+config ANON_INODES
+	bool
+
 menuconfig EMBEDDED
 	bool "Configure standard kernel features (for small systems)"
 	help
@@ -780,18 +783,6 @@ config PCSPKR_PLATFORM
           This option allows to disable the internal PC-Speaker
           support, saving some memory.
 
-config COMPAT_BRK
-	bool "Disable heap randomization"
-	default y
-	help
-	  Randomizing heap placement makes heap exploits harder, but it
-	  also breaks ancient binaries (including anything libc5 based).
-	  This option changes the bootup default to heap randomization
-	  disabled, and can be overriden runtime by setting
-	  /proc/sys/kernel/randomize_va_space to 2.
-
-	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
-
 config BASE_FULL
 	default y
 	bool "Enable full-sized data structures for core" if EMBEDDED
@@ -809,9 +800,6 @@ config FUTEX
 	  support for "fast userspace mutexes".  The resulting kernel may not
 	  run glibc-based applications correctly.
 
-config ANON_INODES
-	bool
-
 config EPOLL
 	bool "Enable eventpoll support" if EMBEDDED
 	default y
@@ -897,6 +885,18 @@ config SLUB_DEBUG
 	  SLUB sysfs support. /sys/slab will not exist and there will be
 	  no support for cache validation etc.
 
+config COMPAT_BRK
+	bool "Disable heap randomization"
+	default y
+	help
+	  Randomizing heap placement makes heap exploits harder, but it
+	  also breaks ancient binaries (including anything libc5 based).
+	  This option changes the bootup default to heap randomization
+	  disabled, and can be overriden runtime by setting
+	  /proc/sys/kernel/randomize_va_space to 2.
+
+	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
 choice
 	prompt "Choose SLAB allocator"
 	default SLUB
diff --git a/kernel/fork.c b/kernel/fork.c
index a66fbde2071..4854c2c4a82 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1179,10 +1179,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 #endif
 	clear_all_latency_tracing(p);
 
-	/* Our parent execution domain becomes current domain
-	   These must match for thread signalling to apply */
-	p->parent_exec_id = p->self_exec_id;
-
 	/* ok, now we should be set up.. */
 	p->exit_signal = (clone_flags & CLONE_THREAD) ? -1 : (clone_flags & CSIGNAL);
 	p->pdeath_signal = 0;
@@ -1220,10 +1216,13 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 		set_task_cpu(p, smp_processor_id());
 
 	/* CLONE_PARENT re-uses the old parent */
-	if (clone_flags & (CLONE_PARENT|CLONE_THREAD))
+	if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
 		p->real_parent = current->real_parent;
-	else
+		p->parent_exec_id = current->parent_exec_id;
+	} else {
 		p->real_parent = current;
+		p->parent_exec_id = current->self_exec_id;
+	}
 
 	spin_lock(&current->sighand->siglock);
 
diff --git a/kernel/module.c b/kernel/module.c
index ba22484a987..1196f5d1170 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2015,14 +2015,6 @@ static noinline struct module *load_module(void __user *umod,
 	if (err < 0)
 		goto free_mod;
 
-#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
-	mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t),
-				      mod->name);
-	if (!mod->refptr) {
-		err = -ENOMEM;
-		goto free_mod;
-	}
-#endif
 	if (pcpuindex) {
 		/* We have a special allocation for this section. */
 		percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
@@ -2030,7 +2022,7 @@ static noinline struct module *load_module(void __user *umod,
 					 mod->name);
 		if (!percpu) {
 			err = -ENOMEM;
-			goto free_percpu;
+			goto free_mod;
 		}
 		sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
 		mod->percpu = percpu;
@@ -2082,6 +2074,14 @@ static noinline struct module *load_module(void __user *umod,
 	/* Module has been moved. */
 	mod = (void *)sechdrs[modindex].sh_addr;
 
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+	mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t),
+				      mod->name);
+	if (!mod->refptr) {
+		err = -ENOMEM;
+		goto free_init;
+	}
+#endif
 	/* Now we've moved module, initialize linked lists, etc. */
 	module_unload_init(mod);
 
@@ -2288,15 +2288,17 @@ static noinline struct module *load_module(void __user *umod,
 	ftrace_release(mod->module_core, mod->core_size);
  free_unload:
 	module_unload_free(mod);
+ free_init:
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+	percpu_modfree(mod->refptr);
+#endif
 	module_free(mod, mod->module_init);
  free_core:
 	module_free(mod, mod->module_core);
+	/* mod will be freed with core. Don't access it beyond this line! */
  free_percpu:
 	if (percpu)
 		percpu_modfree(percpu);
-#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
-	percpu_modfree(mod->refptr);
-#endif
  free_mod:
 	kfree(args);
  free_hdr:
diff --git a/kernel/signal.c b/kernel/signal.c
index 2a74fe87c0d..1c8814481a1 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1575,7 +1575,15 @@ static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 	read_lock(&tasklist_lock);
 	if (may_ptrace_stop()) {
 		do_notify_parent_cldstop(current, CLD_TRAPPED);
+		/*
+		 * Don't want to allow preemption here, because
+		 * sys_ptrace() needs this task to be inactive.
+		 *
+		 * XXX: implement read_unlock_no_resched().
+		 */
+		preempt_disable();
 		read_unlock(&tasklist_lock);
+		preempt_enable_no_resched();
 		schedule();
 	} else {
 		/*
diff --git a/kernel/softirq.c b/kernel/softirq.c
index bdbe9de9cd8..9041ea7948f 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -626,6 +626,7 @@ static int ksoftirqd(void * __bind_cpu)
 			preempt_enable_no_resched();
 			cond_resched();
 			preempt_disable();
+			rcu_qsctr_inc((long)__bind_cpu);
 		}
 		preempt_enable();
 		set_current_state(TASK_INTERRUPTIBLE);
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 43f891b05a4..00d59d048ed 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -122,8 +122,10 @@ void acct_update_integrals(struct task_struct *tsk)
 	if (likely(tsk->mm)) {
 		cputime_t time, dtime;
 		struct timeval value;
+		unsigned long flags;
 		u64 delta;
 
+		local_irq_save(flags);
 		time = tsk->stime + tsk->utime;
 		dtime = cputime_sub(time, tsk->acct_timexpd);
 		jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
@@ -131,10 +133,12 @@ void acct_update_integrals(struct task_struct *tsk)
 		delta = delta * USEC_PER_SEC + value.tv_usec;
 
 		if (delta == 0)
-			return;
+			goto out;
 		tsk->acct_timexpd = time;
 		tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
 		tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
+	out:
+		local_irq_restore(flags);
 	}
 }
 
diff --git a/kernel/user.c b/kernel/user.c
index 6a9b696128c..fbb300e6191 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -286,14 +286,12 @@ int __init uids_sysfs_init(void)
 /* work function to remove sysfs directory for a user and free up
  * corresponding structures.
  */
-static void remove_user_sysfs_dir(struct work_struct *w)
+static void cleanup_user_struct(struct work_struct *w)
 {
 	struct user_struct *up = container_of(w, struct user_struct, work);
 	unsigned long flags;
 	int remove_user = 0;
 
-	if (up->user_ns != &init_user_ns)
-		return;
 	/* Make uid_hash_remove() + sysfs_remove_file() + kobject_del()
 	 * atomic.
 	 */
@@ -312,9 +310,11 @@ static void remove_user_sysfs_dir(struct work_struct *w)
 	if (!remove_user)
 		goto done;
 
-	kobject_uevent(&up->kobj, KOBJ_REMOVE);
-	kobject_del(&up->kobj);
-	kobject_put(&up->kobj);
+	if (up->user_ns == &init_user_ns) {
+		kobject_uevent(&up->kobj, KOBJ_REMOVE);
+		kobject_del(&up->kobj);
+		kobject_put(&up->kobj);
+	}
 
 	sched_destroy_user(up);
 	key_put(up->uid_keyring);
@@ -335,7 +335,7 @@ static void free_user(struct user_struct *up, unsigned long flags)
 	atomic_inc(&up->__count);
 	spin_unlock_irqrestore(&uidhash_lock, flags);
 
-	INIT_WORK(&up->work, remove_user_sysfs_dir);
+	INIT_WORK(&up->work, cleanup_user_struct);
 	schedule_work(&up->work);
 }
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 1bcf9cd4baa..c536b37a11c 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -402,7 +402,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !X86 && !MIPS && !PPC
+	select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
 	select KALLSYMS
 	select KALLSYMS_ALL
 
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 1338469ac84..35a1f7ff414 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -948,15 +948,15 @@ done:
  */
 int bitmap_find_free_region(unsigned long *bitmap, int bits, int order)
 {
-	int pos;		/* scans bitmap by regions of size order */
+	int pos, end;		/* scans bitmap by regions of size order */
 
-	for (pos = 0; pos < bits; pos += (1 << order))
-		if (__reg_op(bitmap, pos, order, REG_OP_ISFREE))
-			break;
-	if (pos == bits)
-		return -ENOMEM;
-	__reg_op(bitmap, pos, order, REG_OP_ALLOC);
-	return pos;
+	for (pos = 0 ; (end = pos + (1 << order)) <= bits; pos = end) {
+		if (!__reg_op(bitmap, pos, order, REG_OP_ISFREE))
+			continue;
+		__reg_op(bitmap, pos, order, REG_OP_ALLOC);
+		return pos;
+	}
+	return -ENOMEM;
 }
 EXPORT_SYMBOL(bitmap_find_free_region);
 
diff --git a/lib/idr.c b/lib/idr.c
index c11c5765cde..dab4bca86f5 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -449,6 +449,7 @@ void idr_remove_all(struct idr *idp)
 
 	n = idp->layers * IDR_BITS;
 	p = idp->top;
+	rcu_assign_pointer(idp->top, NULL);
 	max = 1 << n;
 
 	id = 0;
@@ -467,7 +468,6 @@ void idr_remove_all(struct idr *idp)
 			p = *--paa;
 		}
 	}
-	rcu_assign_pointer(idp->top, NULL);
 	idp->layers = 0;
 }
 EXPORT_SYMBOL(idr_remove_all);
diff --git a/mm/highmem.c b/mm/highmem.c
index b36b83b920f..910198037bf 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -67,6 +67,25 @@ pte_t * pkmap_page_table;
 
 static DECLARE_WAIT_QUEUE_HEAD(pkmap_map_wait);
 
+/*
+ * Most architectures have no use for kmap_high_get(), so let's abstract
+ * the disabling of IRQ out of the locking in that case to save on a
+ * potential useless overhead.
+ */
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
+#define lock_kmap()             spin_lock_irq(&kmap_lock)
+#define unlock_kmap()           spin_unlock_irq(&kmap_lock)
+#define lock_kmap_any(flags)    spin_lock_irqsave(&kmap_lock, flags)
+#define unlock_kmap_any(flags)  spin_unlock_irqrestore(&kmap_lock, flags)
+#else
+#define lock_kmap()             spin_lock(&kmap_lock)
+#define unlock_kmap()           spin_unlock(&kmap_lock)
+#define lock_kmap_any(flags)    \
+		do { spin_lock(&kmap_lock); (void)(flags); } while (0)
+#define unlock_kmap_any(flags)  \
+		do { spin_unlock(&kmap_lock); (void)(flags); } while (0)
+#endif
+
 static void flush_all_zero_pkmaps(void)
 {
 	int i;
@@ -113,9 +132,9 @@ static void flush_all_zero_pkmaps(void)
  */
 void kmap_flush_unused(void)
 {
-	spin_lock(&kmap_lock);
+	lock_kmap();
 	flush_all_zero_pkmaps();
-	spin_unlock(&kmap_lock);
+	unlock_kmap();
 }
 
 static inline unsigned long map_new_virtual(struct page *page)
@@ -145,10 +164,10 @@ start:
 
 			__set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&pkmap_map_wait, &wait);
-			spin_unlock(&kmap_lock);
+			unlock_kmap();
 			schedule();
 			remove_wait_queue(&pkmap_map_wait, &wait);
-			spin_lock(&kmap_lock);
+			lock_kmap();
 
 			/* Somebody else might have mapped it while we slept */
 			if (page_address(page))
@@ -184,29 +203,59 @@ void *kmap_high(struct page *page)
 	 * For highmem pages, we can't trust "virtual" until
 	 * after we have the lock.
 	 */
-	spin_lock(&kmap_lock);
+	lock_kmap();
 	vaddr = (unsigned long)page_address(page);
 	if (!vaddr)
 		vaddr = map_new_virtual(page);
 	pkmap_count[PKMAP_NR(vaddr)]++;
 	BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 2);
-	spin_unlock(&kmap_lock);
+	unlock_kmap();
 	return (void*) vaddr;
 }
 
 EXPORT_SYMBOL(kmap_high);
 
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
+/**
+ * kmap_high_get - pin a highmem page into memory
+ * @page: &struct page to pin
+ *
+ * Returns the page's current virtual memory address, or NULL if no mapping
+ * exists.  When and only when a non null address is returned then a
+ * matching call to kunmap_high() is necessary.
+ *
+ * This can be called from any context.
+ */
+void *kmap_high_get(struct page *page)
+{
+	unsigned long vaddr, flags;
+
+	lock_kmap_any(flags);
+	vaddr = (unsigned long)page_address(page);
+	if (vaddr) {
+		BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 1);
+		pkmap_count[PKMAP_NR(vaddr)]++;
+	}
+	unlock_kmap_any(flags);
+	return (void*) vaddr;
+}
+#endif
+
 /**
  * kunmap_high - map a highmem page into memory
  * @page: &struct page to unmap
+ *
+ * If ARCH_NEEDS_KMAP_HIGH_GET is not defined then this may be called
+ * only from user context.
  */
 void kunmap_high(struct page *page)
 {
 	unsigned long vaddr;
 	unsigned long nr;
+	unsigned long flags;
 	int need_wakeup;
 
-	spin_lock(&kmap_lock);
+	lock_kmap_any(flags);
 	vaddr = (unsigned long)page_address(page);
 	BUG_ON(!vaddr);
 	nr = PKMAP_NR(vaddr);
@@ -232,7 +281,7 @@ void kunmap_high(struct page *page)
 		 */
 		need_wakeup = waitqueue_active(&pkmap_map_wait);
 	}
-	spin_unlock(&kmap_lock);
+	unlock_kmap_any(flags);
 
 	/* do wake-up, if needed, race-free outside of the spin lock */
 	if (need_wakeup)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 6177e3bcd66..56ddf41149e 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1262,7 +1262,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
 	 * Move the pages to the [file or anon] inactive list.
 	 */
 	pagevec_init(&pvec, 1);
-	pgmoved = 0;
 	lru = LRU_BASE + file * LRU_FILE;
 
 	spin_lock_irq(&zone->lru_lock);
@@ -1274,6 +1273,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
 	 */
 	reclaim_stat->recent_rotated[!!file] += pgmoved;
 
+	pgmoved = 0;
 	while (!list_empty(&l_inactive)) {
 		page = lru_to_page(&l_inactive);
 		prefetchw_prev_lru_page(page, &l_inactive, flags);
@@ -1469,7 +1469,7 @@ static void shrink_zone(int priority, struct zone *zone,
 		int file = is_file_lru(l);
 		int scan;
 
-		scan = zone_page_state(zone, NR_LRU_BASE + l);
+		scan = zone_nr_pages(zone, sc, l);
 		if (priority) {
 			scan >>= priority;
 			scan = (scan * percent[file]) / 100;
diff --git a/net/802/tr.c b/net/802/tr.c
index 158150fee46..f47ae289d83 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -668,3 +668,5 @@ module_init(rif_init);
 
 EXPORT_SYMBOL(tr_type_trans);
 EXPORT_SYMBOL(alloc_trdev);
+
+MODULE_LICENSE("GPL");
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 4a19acd3a32..1b34135cf99 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -553,7 +553,7 @@ static int vlan_dev_neigh_setup(struct net_device *dev, struct neigh_parms *pa)
 	int err = 0;
 
 	if (netif_device_present(real_dev) && ops->ndo_neigh_setup)
-		err = ops->ndo_neigh_setup(dev, pa);
+		err = ops->ndo_neigh_setup(real_dev, pa);
 
 	return err;
 }
@@ -639,6 +639,7 @@ static int vlan_dev_init(struct net_device *dev)
 		dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
 		dev->netdev_ops         = &vlan_netdev_ops;
 	}
+	netdev_resync_ops(dev);
 
 	if (is_vlan_dev(real_dev))
 		subclass = 1;
diff --git a/net/core/dev.c b/net/core/dev.c
index 72b0d26fd46..e3fe5c70560 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2267,12 +2267,6 @@ int netif_receive_skb(struct sk_buff *skb)
 
 	rcu_read_lock();
 
-	/* Don't receive packets in an exiting network namespace */
-	if (!net_alive(dev_net(skb->dev))) {
-		kfree_skb(skb);
-		goto out;
-	}
-
 #ifdef CONFIG_NET_CLS_ACT
 	if (skb->tc_verd & TC_NCLS) {
 		skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
@@ -2594,9 +2588,9 @@ static int process_backlog(struct napi_struct *napi, int quota)
 		local_irq_disable();
 		skb = __skb_dequeue(&queue->input_pkt_queue);
 		if (!skb) {
-			__napi_complete(napi);
 			local_irq_enable();
-			break;
+			napi_complete(napi);
+			goto out;
 		}
 		local_irq_enable();
 
@@ -2605,6 +2599,7 @@ static int process_backlog(struct napi_struct *napi, int quota)
 
 	napi_gro_flush(napi);
 
+out:
 	return work;
 }
 
@@ -2677,7 +2672,7 @@ void netif_napi_del(struct napi_struct *napi)
 	struct sk_buff *skb, *next;
 
 	list_del_init(&napi->dev_list);
-	kfree(napi->skb);
+	kfree_skb(napi->skb);
 
 	for (skb = napi->gro_list; skb; skb = next) {
 		next = skb->next;
@@ -4288,6 +4283,39 @@ unsigned long netdev_fix_features(unsigned long features, const char *name)
 }
 EXPORT_SYMBOL(netdev_fix_features);
 
+/* Some devices need to (re-)set their netdev_ops inside
+ * ->init() or similar.  If that happens, we have to setup
+ * the compat pointers again.
+ */
+void netdev_resync_ops(struct net_device *dev)
+{
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	dev->init = ops->ndo_init;
+	dev->uninit = ops->ndo_uninit;
+	dev->open = ops->ndo_open;
+	dev->change_rx_flags = ops->ndo_change_rx_flags;
+	dev->set_rx_mode = ops->ndo_set_rx_mode;
+	dev->set_multicast_list = ops->ndo_set_multicast_list;
+	dev->set_mac_address = ops->ndo_set_mac_address;
+	dev->validate_addr = ops->ndo_validate_addr;
+	dev->do_ioctl = ops->ndo_do_ioctl;
+	dev->set_config = ops->ndo_set_config;
+	dev->change_mtu = ops->ndo_change_mtu;
+	dev->neigh_setup = ops->ndo_neigh_setup;
+	dev->tx_timeout = ops->ndo_tx_timeout;
+	dev->get_stats = ops->ndo_get_stats;
+	dev->vlan_rx_register = ops->ndo_vlan_rx_register;
+	dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
+	dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = ops->ndo_poll_controller;
+#endif
+#endif
+}
+EXPORT_SYMBOL(netdev_resync_ops);
+
 /**
  *	register_netdevice	- register a network device
  *	@dev: device to register
@@ -4332,27 +4360,7 @@ int register_netdevice(struct net_device *dev)
 	 * This is temporary until all network devices are converted.
 	 */
 	if (dev->netdev_ops) {
-		const struct net_device_ops *ops = dev->netdev_ops;
-
-		dev->init = ops->ndo_init;
-		dev->uninit = ops->ndo_uninit;
-		dev->open = ops->ndo_open;
-		dev->change_rx_flags = ops->ndo_change_rx_flags;
-		dev->set_rx_mode = ops->ndo_set_rx_mode;
-		dev->set_multicast_list = ops->ndo_set_multicast_list;
-		dev->set_mac_address = ops->ndo_set_mac_address;
-		dev->validate_addr = ops->ndo_validate_addr;
-		dev->do_ioctl = ops->ndo_do_ioctl;
-		dev->set_config = ops->ndo_set_config;
-		dev->change_mtu = ops->ndo_change_mtu;
-		dev->tx_timeout = ops->ndo_tx_timeout;
-		dev->get_stats = ops->ndo_get_stats;
-		dev->vlan_rx_register = ops->ndo_vlan_rx_register;
-		dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
-		dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-		dev->poll_controller = ops->ndo_poll_controller;
-#endif
+		netdev_resync_ops(dev);
 	} else {
 		char drivername[64];
 		pr_info("%s (%s): not using net_device_ops yet\n",
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 6ac29a46e23..484f58750eb 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -77,7 +77,9 @@ static ssize_t netdev_store(struct device *dev, struct device_attribute *attr,
 	if (endp == buf)
 		goto err;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return -ERESTARTSYS;
+
 	if (dev_isalive(net)) {
 		if ((ret = (*set)(net, new)) == 0)
 			ret = len;
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 2adb1a7d361..e3bebd36f05 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -157,9 +157,6 @@ static void cleanup_net(struct work_struct *work)
 	struct pernet_operations *ops;
 	struct net *net;
 
-	/* Be very certain incoming network packets will not find us */
-	rcu_barrier();
-
 	net = container_of(work, struct net, work);
 
 	mutex_lock(&net_mutex);
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 705b33b184a..fc562d29cc4 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -1205,7 +1205,7 @@ static struct pernet_operations __net_initdata icmp_sk_ops = {
 
 int __init icmp_init(void)
 {
-	return register_pernet_device(&icmp_sk_ops);
+	return register_pernet_subsys(&icmp_sk_ops);
 }
 
 EXPORT_SYMBOL(icmp_err_convert);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 6659ac000ee..7985346653b 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -463,6 +463,7 @@ err:
 static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 			 struct net_device *dev)
 {
+	struct net *net = container_of(qp->q.net, struct net, ipv4.frags);
 	struct iphdr *iph;
 	struct sk_buff *fp, *head = qp->q.fragments;
 	int len;
@@ -548,7 +549,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 	iph = ip_hdr(head);
 	iph->frag_off = 0;
 	iph->tot_len = htons(len);
-	IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_REASMOKS);
+	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMOKS);
 	qp->q.fragments = NULL;
 	return 0;
 
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 19d7b429a26..cf74c416831 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2443,7 +2443,7 @@ static struct pernet_operations __net_initdata tcp_sk_ops = {
 void __init tcp_v4_init(void)
 {
 	inet_hashinfo_init(&tcp_hashinfo);
-	if (register_pernet_device(&tcp_sk_ops))
+	if (register_pernet_subsys(&tcp_sk_ops))
 		panic("Failed to create the TCP control socket.\n");
 }
 
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index f9afb452249..1220e2c7831 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -493,15 +493,17 @@ static void addrconf_forward_change(struct net *net, __s32 newf)
 	read_unlock(&dev_base_lock);
 }
 
-static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
+static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 {
 	struct net *net;
 
 	net = (struct net *)table->extra2;
 	if (p == &net->ipv6.devconf_dflt->forwarding)
-		return;
+		return 0;
+
+	if (!rtnl_trylock())
+		return -ERESTARTSYS;
 
-	rtnl_lock();
 	if (p == &net->ipv6.devconf_all->forwarding) {
 		__s32 newf = net->ipv6.devconf_all->forwarding;
 		net->ipv6.devconf_dflt->forwarding = newf;
@@ -512,6 +514,7 @@ static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 
 	if (*p)
 		rt6_purge_dflt_routers(net);
+	return 1;
 }
 #endif
 
@@ -2608,9 +2611,6 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 
 	ASSERT_RTNL();
 
-	if ((dev->flags & IFF_LOOPBACK) && how == 1)
-		how = 0;
-
 	rt6_ifdown(net, dev);
 	neigh_ifdown(&nd_tbl, dev);
 
@@ -3983,7 +3983,7 @@ int addrconf_sysctl_forward(ctl_table *ctl, int write, struct file * filp,
 	ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
 
 	if (write)
-		addrconf_fixup_forwarding(ctl, valp, val);
+		ret = addrconf_fixup_forwarding(ctl, valp, val);
 	return ret;
 }
 
@@ -4019,8 +4019,7 @@ static int addrconf_sysctl_forward_strategy(ctl_table *table,
 	}
 
 	*valp = new;
-	addrconf_fixup_forwarding(table, valp, val);
-	return 1;
+	return addrconf_fixup_forwarding(table, valp, val);
 }
 
 static struct addrconf_sysctl_table
@@ -4446,25 +4445,6 @@ int unregister_inet6addr_notifier(struct notifier_block *nb)
 
 EXPORT_SYMBOL(unregister_inet6addr_notifier);
 
-static void addrconf_net_exit(struct net *net)
-{
-	struct net_device *dev;
-
-	rtnl_lock();
-	/* clean dev list */
-	for_each_netdev(net, dev) {
-		if (__in6_dev_get(dev) == NULL)
-			continue;
-		addrconf_ifdown(dev, 1);
-	}
-	addrconf_ifdown(net->loopback_dev, 2);
-	rtnl_unlock();
-}
-
-static struct pernet_operations addrconf_net_ops = {
-	.exit = addrconf_net_exit,
-};
-
 /*
  *	Init / cleanup code
  */
@@ -4506,10 +4486,6 @@ int __init addrconf_init(void)
 	if (err)
 		goto errlo;
 
-	err = register_pernet_device(&addrconf_net_ops);
-	if (err)
-		return err;
-
 	register_netdevice_notifier(&ipv6_dev_notf);
 
 	addrconf_verify(0);
@@ -4539,15 +4515,22 @@ errlo:
 void addrconf_cleanup(void)
 {
 	struct inet6_ifaddr *ifa;
+	struct net_device *dev;
 	int i;
 
 	unregister_netdevice_notifier(&ipv6_dev_notf);
-	unregister_pernet_device(&addrconf_net_ops);
-
 	unregister_pernet_subsys(&addrconf_ops);
 
 	rtnl_lock();
 
+	/* clean dev list */
+	for_each_netdev(&init_net, dev) {
+		if (__in6_dev_get(dev) == NULL)
+			continue;
+		addrconf_ifdown(dev, 1);
+	}
+	addrconf_ifdown(init_net.loopback_dev, 2);
+
 	/*
 	 *	Check hash table.
 	 */
@@ -4568,6 +4551,4 @@ void addrconf_cleanup(void)
 
 	del_timer(&addr_chk_timer);
 	rtnl_unlock();
-
-	unregister_pernet_subsys(&addrconf_net_ops);
 }
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index c802bc1658a..9c8309ed35c 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -72,6 +72,10 @@ MODULE_LICENSE("GPL");
 static struct list_head inetsw6[SOCK_MAX];
 static DEFINE_SPINLOCK(inetsw6_lock);
 
+static int disable_ipv6 = 0;
+module_param_named(disable, disable_ipv6, int, 0);
+MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+
 static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
 {
 	const int offset = sk->sk_prot->obj_size - sizeof(struct ipv6_pinfo);
@@ -991,10 +995,21 @@ static int __init inet6_init(void)
 {
 	struct sk_buff *dummy_skb;
 	struct list_head *r;
-	int err;
+	int err = 0;
 
 	BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb));
 
+	/* Register the socket-side information for inet6_create.  */
+	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
+		INIT_LIST_HEAD(r);
+
+	if (disable_ipv6) {
+		printk(KERN_INFO
+		       "IPv6: Loaded, but administratively disabled, "
+		       "reboot required to enable\n");
+		goto out;
+	}
+
 	err = proto_register(&tcpv6_prot, 1);
 	if (err)
 		goto out;
@@ -1012,10 +1027,6 @@ static int __init inet6_init(void)
 		goto out_unregister_udplite_proto;
 
 
-	/* Register the socket-side information for inet6_create.  */
-	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
-		INIT_LIST_HEAD(r);
-
 	/* We MUST register RAW sockets before we create the ICMP6,
 	 * IGMP6, or NDISC control sockets.
 	 */
@@ -1181,6 +1192,9 @@ module_init(inet6_init);
 
 static void __exit inet6_exit(void)
 {
+	if (disable_ipv6)
+		return;
+
 	/* First of all disallow new sockets creation. */
 	sock_unregister(PF_INET6);
 	/* Disallow any further netlink messages */
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index ed4d79a9e4a..058a5e4a60c 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -528,14 +528,14 @@ find_prev_fhdr(struct sk_buff *skb, u8 *prevhdrp, int *prevhoff, int *fhoff)
 		if (!ipv6_ext_hdr(nexthdr)) {
 			return -1;
 		}
-		if (len < (int)sizeof(struct ipv6_opt_hdr)) {
-			pr_debug("too short\n");
-			return -1;
-		}
 		if (nexthdr == NEXTHDR_NONE) {
 			pr_debug("next header is none\n");
 			return -1;
 		}
+		if (len < (int)sizeof(struct ipv6_opt_hdr)) {
+			pr_debug("too short\n");
+			return -1;
+		}
 		if (skb_copy_bits(skb, start, &hdr, sizeof(hdr)))
 			BUG();
 		if (nexthdr == NEXTHDR_AUTH)
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 3c575118fca..e9ac7a12f59 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -452,6 +452,7 @@ err:
 static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 			  struct net_device *dev)
 {
+	struct net *net = container_of(fq->q.net, struct net, ipv6.frags);
 	struct sk_buff *fp, *head = fq->q.fragments;
 	int    payload_len;
 	unsigned int nhoff;
@@ -551,8 +552,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 					  head->csum);
 
 	rcu_read_lock();
-	IP6_INC_STATS_BH(dev_net(dev),
-			 __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
+	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
 	rcu_read_unlock();
 	fq->q.fragments = NULL;
 	return 1;
@@ -566,8 +566,7 @@ out_oom:
 		printk(KERN_DEBUG "ip6_frag_reasm: no memory for reassembly\n");
 out_fail:
 	rcu_read_lock();
-	IP6_INC_STATS_BH(dev_net(dev),
-			 __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
+	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
 	rcu_read_unlock();
 	return -1;
 }
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index d3467e563f0..5cee2bcbcec 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -188,9 +188,9 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct net *net,
 	}
 
 	nt = netdev_priv(dev);
-	ipip6_tunnel_init(dev);
 
 	nt->parms = *parms;
+	ipip6_tunnel_init(dev);
 
 	if (parms->i_flags & SIT_ISATAP)
 		dev->priv_flags |= IFF_ISATAP;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 94de5033f0b..37e3d5ef7e3 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -752,6 +752,8 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
 		skb_copy_queue_mapping(frag, first);
 
 		frag->do_not_encrypt = first->do_not_encrypt;
+		frag->dev = first->dev;
+		frag->iif = first->iif;
 
 		pos += copylen;
 		left -= copylen;
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 90ce9ddb945..f4935e344b6 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -726,7 +726,7 @@ nf_conntrack_in(struct net *net, u_int8_t pf, unsigned int hooknum,
 	NF_CT_ASSERT(skb->nfct);
 
 	ret = l4proto->packet(ct, skb, dataoff, ctinfo, pf, hooknum);
-	if (ret < 0) {
+	if (ret <= 0) {
 		/* Invalid: inverse of the return code tells
 		 * the netfilter core what to do */
 		pr_debug("nf_conntrack_in: Can't track with proto module\n");
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index cb78aa00399..ed6d873ad38 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1780,6 +1780,7 @@ ctnetlink_create_expect(struct nlattr *cda[], u_int8_t u3, u32 pid, int report)
 		goto out;
 	}
 
+	exp->class = 0;
 	exp->expectfn = NULL;
 	exp->flags = 0;
 	exp->master = ct;
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index a1edb9c1ade..f3fd154d1dd 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -859,7 +859,7 @@ static int tcp_packet(struct nf_conn *ct,
 			 */
 			if (nf_ct_kill(ct))
 				return -NF_REPEAT;
-			return -NF_DROP;
+			return NF_DROP;
 		}
 		/* Fall through */
 	case TCP_CONNTRACK_IGNORE:
@@ -892,7 +892,7 @@ static int tcp_packet(struct nf_conn *ct,
 				nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 					  "nf_ct_tcp: killing out of sync session ");
 			nf_ct_kill(ct);
-			return -NF_DROP;
+			return NF_DROP;
 		}
 		ct->proto.tcp.last_index = index;
 		ct->proto.tcp.last_dir = dir;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 9eb895c7a2a..3ae3cb81656 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1084,6 +1084,13 @@ out:
 	return 0;
 }
 
+/**
+ * netlink_set_err - report error to broadcast listeners
+ * @ssk: the kernel netlink socket, as returned by netlink_kernel_create()
+ * @pid: the PID of a process that we want to skip (if any)
+ * @groups: the broadcast group that will notice the error
+ * @code: error code, must be negative (as usual in kernelspace)
+ */
 void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
 {
 	struct netlink_set_err_data info;
@@ -1093,7 +1100,8 @@ void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
 	info.exclude_sk = ssk;
 	info.pid = pid;
 	info.group = group;
-	info.code = code;
+	/* sk->sk_err wants a positive error value */
+	info.code = -code;
 
 	read_lock(&nl_table_lock);
 
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index 5c72a116b1a..f8f047b6124 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -183,13 +183,6 @@ override:
 		if (R_tab == NULL)
 			goto failure;
 
-		if (!est && (ret == ACT_P_CREATED ||
-			     !gen_estimator_active(&police->tcf_bstats,
-						   &police->tcf_rate_est))) {
-			err = -EINVAL;
-			goto failure;
-		}
-
 		if (parm->peakrate.rate) {
 			P_tab = qdisc_get_rtab(&parm->peakrate,
 					       tb[TCA_POLICE_PEAKRATE]);
@@ -205,6 +198,12 @@ override:
 					    &police->tcf_lock, est);
 		if (err)
 			goto failure_unlock;
+	} else if (tb[TCA_POLICE_AVRATE] &&
+		   (ret == ACT_P_CREATED ||
+		    !gen_estimator_active(&police->tcf_bstats,
+					  &police->tcf_rate_est))) {
+		err = -EINVAL;
+		goto failure_unlock;
 	}
 
 	/* No failure allowed after this point */
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index 4c8d9f45ce0..905fda582b9 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -111,7 +111,8 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 		if (sctp_addip_enable) {
 			auth_chunks->chunks[0] = SCTP_CID_ASCONF;
 			auth_chunks->chunks[1] = SCTP_CID_ASCONF_ACK;
-			auth_chunks->param_hdr.length += htons(2);
+			auth_chunks->param_hdr.length =
+					htons(sizeof(sctp_paramhdr_t) + 2);
 		}
 	}
 
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index b78e3be6901..c4986d0f741 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -717,15 +717,20 @@ static int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev,
 static int sctp_ctl_sock_init(void)
 {
 	int err;
-	sa_family_t family;
+	sa_family_t family = PF_INET;
 
 	if (sctp_get_pf_specific(PF_INET6))
 		family = PF_INET6;
-	else
-		family = PF_INET;
 
 	err = inet_ctl_sock_create(&sctp_ctl_sock, family,
 				   SOCK_SEQPACKET, IPPROTO_SCTP, &init_net);
+
+	/* If IPv6 socket could not be created, try the IPv4 socket */
+	if (err < 0 && family == PF_INET6)
+		err = inet_ctl_sock_create(&sctp_ctl_sock, AF_INET,
+					   SOCK_SEQPACKET, IPPROTO_SCTP,
+					   &init_net);
+
 	if (err < 0) {
 		printk(KERN_ERR
 		       "SCTP: Failed to create the SCTP control socket.\n");
@@ -1322,9 +1327,8 @@ SCTP_STATIC __init int sctp_init(void)
 out:
 	return status;
 err_v6_add_protocol:
-	sctp_v6_del_protocol();
-err_add_protocol:
 	sctp_v4_del_protocol();
+err_add_protocol:
 	inet_ctl_sock_destroy(sctp_ctl_sock);
 err_ctl_sock_init:
 	sctp_v6_protosw_exit();
@@ -1335,7 +1339,6 @@ err_protosw_init:
 	sctp_v4_pf_exit();
 	sctp_v6_pf_exit();
 	sctp_sysctl_unregister();
-	list_del(&sctp_af_inet.list);
 	free_pages((unsigned long)sctp_port_hashtable,
 		   get_order(sctp_port_hashsize *
 			     sizeof(struct sctp_bind_hashbucket)));
@@ -1383,7 +1386,6 @@ SCTP_STATIC __exit void sctp_exit(void)
 	sctp_v4_pf_exit();
 
 	sctp_sysctl_unregister();
-	list_del(&sctp_af_inet.list);
 
 	free_pages((unsigned long)sctp_assoc_hashtable,
 		   get_order(sctp_assoc_hashsize *
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index e1d6076b4f5..b5495aecab6 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -787,36 +787,48 @@ static void sctp_cmd_process_operr(sctp_cmd_seq_t *cmds,
 				   struct sctp_association *asoc,
 				   struct sctp_chunk *chunk)
 {
-	struct sctp_operr_chunk *operr_chunk;
 	struct sctp_errhdr *err_hdr;
+	struct sctp_ulpevent *ev;
 
-	operr_chunk = (struct sctp_operr_chunk *)chunk->chunk_hdr;
-	err_hdr = &operr_chunk->err_hdr;
+	while (chunk->chunk_end > chunk->skb->data) {
+		err_hdr = (struct sctp_errhdr *)(chunk->skb->data);
 
-	switch (err_hdr->cause) {
-	case SCTP_ERROR_UNKNOWN_CHUNK:
-	{
-		struct sctp_chunkhdr *unk_chunk_hdr;
+		ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
+						     GFP_ATOMIC);
+		if (!ev)
+			return;
 
-		unk_chunk_hdr = (struct sctp_chunkhdr *)err_hdr->variable;
-		switch (unk_chunk_hdr->type) {
-		/* ADDIP 4.1 A9) If the peer responds to an ASCONF with an
-		 * ERROR chunk reporting that it did not recognized the ASCONF
-		 * chunk type, the sender of the ASCONF MUST NOT send any
-		 * further ASCONF chunks and MUST stop its T-4 timer.
-		 */
-		case SCTP_CID_ASCONF:
-			asoc->peer.asconf_capable = 0;
-			sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
+		sctp_ulpq_tail_event(&asoc->ulpq, ev);
+
+		switch (err_hdr->cause) {
+		case SCTP_ERROR_UNKNOWN_CHUNK:
+		{
+			sctp_chunkhdr_t *unk_chunk_hdr;
+
+			unk_chunk_hdr = (sctp_chunkhdr_t *)err_hdr->variable;
+			switch (unk_chunk_hdr->type) {
+			/* ADDIP 4.1 A9) If the peer responds to an ASCONF with
+			 * an ERROR chunk reporting that it did not recognized
+			 * the ASCONF chunk type, the sender of the ASCONF MUST
+			 * NOT send any further ASCONF chunks and MUST stop its
+			 * T-4 timer.
+			 */
+			case SCTP_CID_ASCONF:
+				if (asoc->peer.asconf_capable == 0)
+					break;
+
+				asoc->peer.asconf_capable = 0;
+				sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
 					SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+				break;
+			default:
+				break;
+			}
 			break;
+		}
 		default:
 			break;
 		}
-		break;
-	}
-	default:
-		break;
 	}
 }
 
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 3a0cd075914..f88dfded0e3 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -3163,7 +3163,6 @@ sctp_disposition_t sctp_sf_operr_notify(const struct sctp_endpoint *ep,
 					sctp_cmd_seq_t *commands)
 {
 	struct sctp_chunk *chunk = arg;
-	struct sctp_ulpevent *ev;
 
 	if (!sctp_vtag_verify(chunk, asoc))
 		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -3173,21 +3172,10 @@ sctp_disposition_t sctp_sf_operr_notify(const struct sctp_endpoint *ep,
 		return sctp_sf_violation_chunklen(ep, asoc, type, arg,
 						  commands);
 
-	while (chunk->chunk_end > chunk->skb->data) {
-		ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
-						     GFP_ATOMIC);
-		if (!ev)
-			goto nomem;
+	sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
+			SCTP_CHUNK(chunk));
 
-		sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP,
-				SCTP_ULPEVENT(ev));
-		sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
-				SCTP_CHUNK(chunk));
-	}
 	return SCTP_DISPOSITION_CONSUME;
-
-nomem:
-	return SCTP_DISPOSITION_NOMEM;
 }
 
 /*
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 385f427beda..ff50a054686 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -293,11 +293,6 @@ static void rpc_make_runnable(struct rpc_task *task)
 	rpc_clear_queued(task);
 	if (rpc_test_and_set_running(task))
 		return;
-	/* We might have raced */
-	if (RPC_IS_QUEUED(task)) {
-		rpc_clear_running(task);
-		return;
-	}
 	if (RPC_IS_ASYNC(task)) {
 		int status;
 
@@ -607,7 +602,9 @@ void rpc_release_calldata(const struct rpc_call_ops *ops, void *calldata)
  */
 static void __rpc_execute(struct rpc_task *task)
 {
-	int		status = 0;
+	struct rpc_wait_queue *queue;
+	int task_is_async = RPC_IS_ASYNC(task);
+	int status = 0;
 
 	dprintk("RPC: %5u __rpc_execute flags=0x%x\n",
 			task->tk_pid, task->tk_flags);
@@ -647,15 +644,25 @@ static void __rpc_execute(struct rpc_task *task)
 		 */
 		if (!RPC_IS_QUEUED(task))
 			continue;
-		rpc_clear_running(task);
-		if (RPC_IS_ASYNC(task)) {
-			/* Careful! we may have raced... */
-			if (RPC_IS_QUEUED(task))
-				return;
-			if (rpc_test_and_set_running(task))
-				return;
+		/*
+		 * The queue->lock protects against races with
+		 * rpc_make_runnable().
+		 *
+		 * Note that once we clear RPC_TASK_RUNNING on an asynchronous
+		 * rpc_task, rpc_make_runnable() can assign it to a
+		 * different workqueue. We therefore cannot assume that the
+		 * rpc_task pointer may still be dereferenced.
+		 */
+		queue = task->tk_waitqueue;
+		spin_lock_bh(&queue->lock);
+		if (!RPC_IS_QUEUED(task)) {
+			spin_unlock_bh(&queue->lock);
 			continue;
 		}
+		rpc_clear_running(task);
+		spin_unlock_bh(&queue->lock);
+		if (task_is_async)
+			return;
 
 		/* sync task: sleep here */
 		dprintk("RPC: %5u sync task going to sleep\n", task->tk_pid);
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 29e401bb612..62098d101a1 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -663,7 +663,7 @@ void xprt_connect(struct rpc_task *task)
 			xprt, (xprt_connected(xprt) ? "is" : "is not"));
 
 	if (!xprt_bound(xprt)) {
-		task->tk_status = -EIO;
+		task->tk_status = -EAGAIN;
 		return;
 	}
 	if (!xprt_lock_write(xprt, task))
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 5cbb404c4cd..29c71e645b2 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -467,7 +467,7 @@ static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen,
 	int err, sent = 0;
 
 	if (unlikely(!sock))
-		return -ENOTCONN;
+		return -ENOTSOCK;
 
 	clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
 	if (base != 0) {
@@ -577,6 +577,8 @@ static int xs_udp_send_request(struct rpc_task *task)
 				req->rq_svec->iov_base,
 				req->rq_svec->iov_len);
 
+	if (!xprt_bound(xprt))
+		return -ENOTCONN;
 	status = xs_sendpages(transport->sock,
 			      xs_addr(xprt),
 			      xprt->addrlen, xdr,
@@ -594,6 +596,10 @@ static int xs_udp_send_request(struct rpc_task *task)
 	}
 
 	switch (status) {
+	case -ENOTSOCK:
+		status = -ENOTCONN;
+		/* Should we call xs_close() here? */
+		break;
 	case -EAGAIN:
 		xs_nospace(task);
 		break;
@@ -693,6 +699,10 @@ static int xs_tcp_send_request(struct rpc_task *task)
 	}
 
 	switch (status) {
+	case -ENOTSOCK:
+		status = -ENOTCONN;
+		/* Should we call xs_close() here? */
+		break;
 	case -EAGAIN:
 		xs_nospace(task);
 		break;
@@ -1523,7 +1533,7 @@ static void xs_udp_connect_worker4(struct work_struct *work)
 	struct socket *sock = transport->sock;
 	int err, status = -EIO;
 
-	if (xprt->shutdown || !xprt_bound(xprt))
+	if (xprt->shutdown)
 		goto out;
 
 	/* Start by resetting any existing state */
@@ -1564,7 +1574,7 @@ static void xs_udp_connect_worker6(struct work_struct *work)
 	struct socket *sock = transport->sock;
 	int err, status = -EIO;
 
-	if (xprt->shutdown || !xprt_bound(xprt))
+	if (xprt->shutdown)
 		goto out;
 
 	/* Start by resetting any existing state */
@@ -1648,6 +1658,9 @@ static int xs_tcp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock)
 		write_unlock_bh(&sk->sk_callback_lock);
 	}
 
+	if (!xprt_bound(xprt))
+		return -ENOTCONN;
+
 	/* Tell the socket layer to start connecting... */
 	xprt->stat.connect_count++;
 	xprt->stat.connect_start = jiffies;
@@ -1668,7 +1681,7 @@ static void xs_tcp_connect_worker4(struct work_struct *work)
 	struct socket *sock = transport->sock;
 	int err, status = -EIO;
 
-	if (xprt->shutdown || !xprt_bound(xprt))
+	if (xprt->shutdown)
 		goto out;
 
 	if (!sock) {
@@ -1728,7 +1741,7 @@ static void xs_tcp_connect_worker6(struct work_struct *work)
 	struct socket *sock = transport->sock;
 	int err, status = -EIO;
 
-	if (xprt->shutdown || !xprt_bound(xprt))
+	if (xprt->shutdown)
 		goto out;
 
 	if (!sock) {
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index e28e2b8fa43..092ae6faccc 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -102,3 +102,13 @@ config LIB80211_CRYPT_CCMP
 
 config LIB80211_CRYPT_TKIP
 	tristate
+
+config LIB80211_DEBUG
+	bool "lib80211 debugging messages"
+	depends on LIB80211
+	default n
+	---help---
+	  You can enable this if you want verbose debugging messages
+	  from lib80211.
+
+	  If unsure, say N.
diff --git a/net/wireless/lib80211_crypt_ccmp.c b/net/wireless/lib80211_crypt_ccmp.c
index db428194c16..2301dc1edc4 100644
--- a/net/wireless/lib80211_crypt_ccmp.c
+++ b/net/wireless/lib80211_crypt_ccmp.c
@@ -337,6 +337,7 @@ static int lib80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	pos += 8;
 
 	if (ccmp_replay_check(pn, key->rx_pn)) {
+#ifdef CONFIG_LIB80211_DEBUG
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "CCMP: replay detected: STA=%pM "
 				 "previous PN %02x%02x%02x%02x%02x%02x "
@@ -346,6 +347,7 @@ static int lib80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 				 key->rx_pn[3], key->rx_pn[4], key->rx_pn[5],
 				 pn[0], pn[1], pn[2], pn[3], pn[4], pn[5]);
 		}
+#endif
 		key->dot11RSNAStatsCCMPReplays++;
 		return -4;
 	}
diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c
index 7e8e22bfed9..c36287399d7 100644
--- a/net/wireless/lib80211_crypt_tkip.c
+++ b/net/wireless/lib80211_crypt_tkip.c
@@ -465,12 +465,14 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	pos += 8;
 
 	if (tkip_replay_check(iv32, iv16, tkey->rx_iv32, tkey->rx_iv16)) {
+#ifdef CONFIG_LIB80211_DEBUG
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "TKIP: replay detected: STA=%pM"
 			       " previous TSC %08x%04x received TSC "
 			       "%08x%04x\n", hdr->addr2,
 			       tkey->rx_iv32, tkey->rx_iv16, iv32, iv16);
 		}
+#endif
 		tkey->dot11RSNAStatsTKIPReplays++;
 		return -4;
 	}
@@ -505,10 +507,12 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 			 * it needs to be recalculated for the next packet. */
 			tkey->rx_phase1_done = 0;
 		}
+#ifdef CONFIG_LIB80211_DEBUG
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "TKIP: ICV error detected: STA="
 			       "%pM\n", hdr->addr2);
 		}
+#endif
 		tkey->dot11RSNAStatsTKIPICVErrors++;
 		return -5;
 	}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1e728fff474..31b807af323 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1908,6 +1908,11 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
 	if (err)
 		return err;
 
+	if (!drv->ops->get_mesh_params) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
 	/* Get the mesh params */
 	rtnl_lock();
 	err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
@@ -2017,6 +2022,11 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		return err;
 
+	if (!drv->ops->set_mesh_params) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
 	/* This makes sure that there aren't more than 32 mesh config
 	 * parameters (otherwise our bitfield scheme would not work.) */
 	BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
@@ -2061,6 +2071,7 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
 	err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
 	rtnl_unlock();
 
+ out:
 	/* cleanup */
 	cfg80211_put_dev(drv);
 	dev_put(dev);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 85c9034c59b..bd0a16c3de5 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -380,7 +380,8 @@ static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule)
 
 	freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
 
-	if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff)
+	if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
+			freq_range->max_bandwidth_khz > freq_diff)
 		return false;
 
 	return true;
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index e25ff62ab2a..62a5425cc6a 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -748,12 +748,51 @@ static void xfrm_hash_grow_check(struct net *net, int have_hash_collision)
 		schedule_work(&net->xfrm.state_hash_work);
 }
 
+static void xfrm_state_look_at(struct xfrm_policy *pol, struct xfrm_state *x,
+			       struct flowi *fl, unsigned short family,
+			       xfrm_address_t *daddr, xfrm_address_t *saddr,
+			       struct xfrm_state **best, int *acq_in_progress,
+			       int *error)
+{
+	/* Resolution logic:
+	 * 1. There is a valid state with matching selector. Done.
+	 * 2. Valid state with inappropriate selector. Skip.
+	 *
+	 * Entering area of "sysdeps".
+	 *
+	 * 3. If state is not valid, selector is temporary, it selects
+	 *    only session which triggered previous resolution. Key
+	 *    manager will do something to install a state with proper
+	 *    selector.
+	 */
+	if (x->km.state == XFRM_STATE_VALID) {
+		if ((x->sel.family &&
+		     !xfrm_selector_match(&x->sel, fl, x->sel.family)) ||
+		    !security_xfrm_state_pol_flow_match(x, pol, fl))
+			return;
+
+		if (!*best ||
+		    (*best)->km.dying > x->km.dying ||
+		    ((*best)->km.dying == x->km.dying &&
+		     (*best)->curlft.add_time < x->curlft.add_time))
+			*best = x;
+	} else if (x->km.state == XFRM_STATE_ACQ) {
+		*acq_in_progress = 1;
+	} else if (x->km.state == XFRM_STATE_ERROR ||
+		   x->km.state == XFRM_STATE_EXPIRED) {
+		if (xfrm_selector_match(&x->sel, fl, x->sel.family) &&
+		    security_xfrm_state_pol_flow_match(x, pol, fl))
+			*error = -ESRCH;
+	}
+}
+
 struct xfrm_state *
 xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 		struct flowi *fl, struct xfrm_tmpl *tmpl,
 		struct xfrm_policy *pol, int *err,
 		unsigned short family)
 {
+	static xfrm_address_t saddr_wildcard = { };
 	struct net *net = xp_net(pol);
 	unsigned int h;
 	struct hlist_node *entry;
@@ -773,40 +812,27 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 		    xfrm_state_addr_check(x, daddr, saddr, family) &&
 		    tmpl->mode == x->props.mode &&
 		    tmpl->id.proto == x->id.proto &&
-		    (tmpl->id.spi == x->id.spi || !tmpl->id.spi)) {
-			/* Resolution logic:
-			   1. There is a valid state with matching selector.
-			      Done.
-			   2. Valid state with inappropriate selector. Skip.
-
-			   Entering area of "sysdeps".
-
-			   3. If state is not valid, selector is temporary,
-			      it selects only session which triggered
-			      previous resolution. Key manager will do
-			      something to install a state with proper
-			      selector.
-			 */
-			if (x->km.state == XFRM_STATE_VALID) {
-				if ((x->sel.family && !xfrm_selector_match(&x->sel, fl, x->sel.family)) ||
-				    !security_xfrm_state_pol_flow_match(x, pol, fl))
-					continue;
-				if (!best ||
-				    best->km.dying > x->km.dying ||
-				    (best->km.dying == x->km.dying &&
-				     best->curlft.add_time < x->curlft.add_time))
-					best = x;
-			} else if (x->km.state == XFRM_STATE_ACQ) {
-				acquire_in_progress = 1;
-			} else if (x->km.state == XFRM_STATE_ERROR ||
-				   x->km.state == XFRM_STATE_EXPIRED) {
-				if (xfrm_selector_match(&x->sel, fl, x->sel.family) &&
-				    security_xfrm_state_pol_flow_match(x, pol, fl))
-					error = -ESRCH;
-			}
-		}
+		    (tmpl->id.spi == x->id.spi || !tmpl->id.spi))
+			xfrm_state_look_at(pol, x, fl, family, daddr, saddr,
+					   &best, &acquire_in_progress, &error);
+	}
+	if (best)
+		goto found;
+
+	h = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family);
+	hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h, bydst) {
+		if (x->props.family == family &&
+		    x->props.reqid == tmpl->reqid &&
+		    !(x->props.flags & XFRM_STATE_WILDRECV) &&
+		    xfrm_state_addr_check(x, daddr, saddr, family) &&
+		    tmpl->mode == x->props.mode &&
+		    tmpl->id.proto == x->id.proto &&
+		    (tmpl->id.spi == x->id.spi || !tmpl->id.spi))
+			xfrm_state_look_at(pol, x, fl, family, daddr, saddr,
+					   &best, &acquire_in_progress, &error);
 	}
 
+found:
 	x = best;
 	if (!x && !error && !acquire_in_progress) {
 		if (tmpl->id.spi &&
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 3e1057f885c..d190092c3b6 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -11,6 +11,7 @@
 #include <time.h>
 #include <unistd.h>
 #include <sys/stat.h>
+#include <sys/time.h>
 
 #define LKC_DIRECT_LINK
 #include "lkc.h"
@@ -464,9 +465,22 @@ int main(int ac, char **av)
 			input_mode = set_yes;
 			break;
 		case 'r':
+		{
+			struct timeval now;
+			unsigned int seed;
+
+			/*
+			 * Use microseconds derived seed,
+			 * compensate for systems where it may be zero
+			 */
+			gettimeofday(&now, NULL);
+
+			seed = (unsigned int)((now.tv_sec + 1) * (now.tv_usec + 1));
+			srand(seed);
+
 			input_mode = set_random;
-			srand(time(NULL));
 			break;
+		}
 		case 'h':
 			printf(_("See README for usage info\n"));
 			exit(0);
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index 830d9eae11f..273d73888f9 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -843,7 +843,7 @@ void conf_set_all_new_symbols(enum conf_def_mode mode)
 			default:
 				continue;
 			}
-			if (!sym_is_choice(sym) || mode != def_random)
+			if (!(sym_is_choice(sym) && mode == def_random))
 				sym->flags |= SYMBOL_DEF_USER;
 			break;
 		default:
@@ -856,28 +856,49 @@ void conf_set_all_new_symbols(enum conf_def_mode mode)
 
 	if (mode != def_random)
 		return;
-
+	/*
+	 * We have different type of choice blocks.
+	 * If curr.tri equal to mod then we can select several
+	 * choice symbols in one block.
+	 * In this case we do nothing.
+	 * If curr.tri equal yes then only one symbol can be
+	 * selected in a choice block and we set it to yes,
+	 * and the rest to no.
+	 */
 	for_all_symbols(i, csym) {
 		if (sym_has_value(csym) || !sym_is_choice(csym))
 			continue;
 
 		sym_calc_value(csym);
+
+		if (csym->curr.tri != yes)
+			continue;
+
 		prop = sym_get_choice_prop(csym);
-		def = -1;
-		while (1) {
-			cnt = 0;
-			expr_list_for_each_sym(prop->expr, e, sym) {
-				if (sym->visible == no)
-					continue;
-				if (def == cnt++) {
-					csym->def[S_DEF_USER].val = sym;
-					break;
-				}
+
+		/* count entries in choice block */
+		cnt = 0;
+		expr_list_for_each_sym(prop->expr, e, sym)
+			cnt++;
+
+		/*
+		 * find a random value and set it to yes,
+		 * set the rest to no so we have only one set
+		 */
+		def = (rand() % cnt);
+
+		cnt = 0;
+		expr_list_for_each_sym(prop->expr, e, sym) {
+			if (def == cnt++) {
+				sym->def[S_DEF_USER].tri = yes;
+				csym->def[S_DEF_USER].val = sym;
+			}
+			else {
+				sym->def[S_DEF_USER].tri = no;
 			}
-			if (def >= 0 || cnt < 2)
-				break;
-			def = (rand() % cnt) + 1;
 		}
 		csym->flags |= SYMBOL_DEF_USER;
+		/* clear VALID to get value calculated */
+		csym->flags &= ~(SYMBOL_VALID);
 	}
 }
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 8c6b7b09606..fa4a0a17b7e 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -35,9 +35,10 @@ $(objtree)/kernel.spec: $(MKSPEC) $(srctree)/Makefile
 rpm-pkg rpm: $(objtree)/kernel.spec FORCE
 	$(MAKE) clean
 	$(PREV) ln -sf $(srctree) $(KERNELPATH)
+	$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
 	$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
 	$(PREV) rm $(KERNELPATH)
-
+	rm -f $(objtree)/.scmversion
 	set -e; \
 	$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
 	set -e; \
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index ee448cdc6a2..3d93f8c8125 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -96,7 +96,7 @@ echo "%endif"
 
 echo ""
 echo "%clean"
-echo '#echo -rf $RPM_BUILD_ROOT'
+echo 'rm -rf $RPM_BUILD_ROOT'
 echo ""
 echo "%files"
 echo '%defattr (-, root, root)'
diff --git a/scripts/unifdef.c b/scripts/unifdef.c
index 552025e72ac..05a31a6c7e1 100644
--- a/scripts/unifdef.c
+++ b/scripts/unifdef.c
@@ -206,7 +206,7 @@ static void             done(void);
 static void             error(const char *);
 static int              findsym(const char *);
 static void             flushline(bool);
-static Linetype         getline(void);
+static Linetype         get_line(void);
 static Linetype         ifeval(const char **);
 static void             ignoreoff(void);
 static void             ignoreon(void);
@@ -512,7 +512,7 @@ process(void)
 
 	for (;;) {
 		linenum++;
-		lineval = getline();
+		lineval = get_line();
 		trans_table[ifstate[depth]][lineval]();
 		debug("process %s -> %s depth %d",
 		    linetype_name[lineval],
@@ -526,7 +526,7 @@ process(void)
  * help from skipcomment().
  */
 static Linetype
-getline(void)
+get_line(void)
 {
 	const char *cp;
 	int cursym;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0278bc08304..e7ded1326b0 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1498,58 +1498,31 @@ static int smack_socket_post_create(struct socket *sock, int family,
  * looks for host based access restrictions
  *
  * This version will only be appropriate for really small
- * sets of single label hosts. Because of the masking
- * it cannot shortcut out on the first match. There are
- * numerious ways to address the problem, but none of them
- * have been applied here.
+ * sets of single label hosts.
  *
  * Returns the label of the far end or NULL if it's not special.
  */
 static char *smack_host_label(struct sockaddr_in *sip)
 {
 	struct smk_netlbladdr *snp;
-	char *bestlabel = NULL;
 	struct in_addr *siap = &sip->sin_addr;
-	struct in_addr *liap;
-	struct in_addr *miap;
-	struct in_addr bestmask;
 
 	if (siap->s_addr == 0)
 		return NULL;
 
-	bestmask.s_addr = 0;
-
 	for (snp = smack_netlbladdrs; snp != NULL; snp = snp->smk_next) {
-		liap = &snp->smk_host.sin_addr;
-		miap = &snp->smk_mask;
-		/*
-		 * If the addresses match after applying the list entry mask
-		 * the entry matches the address. If it doesn't move along to
-		 * the next entry.
-		 */
-		if ((liap->s_addr & miap->s_addr) !=
-		    (siap->s_addr & miap->s_addr))
-			continue;
 		/*
-		 * If the list entry mask identifies a single address
-		 * it can't get any more specific.
+		 * we break after finding the first match because
+		 * the list is sorted from longest to shortest mask
+		 * so we have found the most specific match
 		 */
-		if (miap->s_addr == 0xffffffff)
+		if ((&snp->smk_host.sin_addr)->s_addr  ==
+			(siap->s_addr & (&snp->smk_mask)->s_addr)) {
 			return snp->smk_label;
-		/*
-		 * If the list entry mask is less specific than the best
-		 * already found this entry is uninteresting.
-		 */
-		if ((miap->s_addr | bestmask.s_addr) == bestmask.s_addr)
-			continue;
-		/*
-		 * This is better than any entry found so far.
-		 */
-		bestmask.s_addr = miap->s_addr;
-		bestlabel = snp->smk_label;
+		}
 	}
 
-	return bestlabel;
+	return NULL;
 }
 
 /**
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 8e42800878f..51f0efc50da 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -650,10 +650,6 @@ static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos)
 
 	return skp;
 }
-/*
-#define BEMASK	0x80000000
-*/
-#define BEMASK	0x00000001
 #define BEBITS	(sizeof(__be32) * 8)
 
 /*
@@ -663,12 +659,10 @@ static int netlbladdr_seq_show(struct seq_file *s, void *v)
 {
 	struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v;
 	unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr;
-	__be32 bebits;
-	int maskn = 0;
+	int maskn;
+	u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr);
 
-	for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1)
-		if ((skp->smk_mask.s_addr & bebits) == 0)
-			break;
+	for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++);
 
 	seq_printf(s, "%u.%u.%u.%u/%d %s\n",
 		hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label);
@@ -702,6 +696,42 @@ static int smk_open_netlbladdr(struct inode *inode, struct file *file)
 }
 
 /**
+ * smk_netlbladdr_insert
+ * @new : netlabel to insert
+ *
+ * This helper insert netlabel in the smack_netlbladdrs list
+ * sorted by netmask length (longest to smallest)
+ */
+static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
+{
+	struct smk_netlbladdr *m;
+
+	if (smack_netlbladdrs == NULL) {
+		smack_netlbladdrs = new;
+		return;
+	}
+
+	/* the comparison '>' is a bit hacky, but works */
+	if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) {
+		new->smk_next = smack_netlbladdrs;
+		smack_netlbladdrs = new;
+		return;
+	}
+	for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) {
+		if (m->smk_next == NULL) {
+			m->smk_next = new;
+			return;
+		}
+		if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) {
+			new->smk_next = m->smk_next;
+			m->smk_next = new;
+			return;
+		}
+	}
+}
+
+
+/**
  * smk_write_netlbladdr - write() for /smack/netlabel
  * @filp: file pointer, not actually used
  * @buf: where to get the data from
@@ -724,8 +754,9 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf,
 	struct netlbl_audit audit_info;
 	struct in_addr mask;
 	unsigned int m;
-	__be32 bebits = BEMASK;
+	u32 mask_bits = (1<<31);
 	__be32 nsa;
+	u32 temp_mask;
 
 	/*
 	 * Must have privilege.
@@ -761,10 +792,13 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf,
 	if (sp == NULL)
 		return -EINVAL;
 
-	for (mask.s_addr = 0; m > 0; m--) {
-		mask.s_addr |= bebits;
-		bebits <<= 1;
+	for (temp_mask = 0; m > 0; m--) {
+		temp_mask |= mask_bits;
+		mask_bits >>= 1;
 	}
+	mask.s_addr = cpu_to_be32(temp_mask);
+
+	newname.sin_addr.s_addr &= mask.s_addr;
 	/*
 	 * Only allow one writer at a time. Writes should be
 	 * quite rare and small in any case.
@@ -772,6 +806,7 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf,
 	mutex_lock(&smk_netlbladdr_lock);
 
 	nsa = newname.sin_addr.s_addr;
+	/* try to find if the prefix is already in the list */
 	for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next)
 		if (skp->smk_host.sin_addr.s_addr == nsa &&
 		    skp->smk_mask.s_addr == mask.s_addr)
@@ -787,9 +822,8 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf,
 			rc = 0;
 			skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr;
 			skp->smk_mask.s_addr = mask.s_addr;
-			skp->smk_next = smack_netlbladdrs;
 			skp->smk_label = sp;
-			smack_netlbladdrs = skp;
+			smk_netlbladdr_insert(skp);
 		}
 	} else {
 		rc = netlbl_cfg_unlbl_static_del(&init_net, NULL,
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 35afd0c33be..718d06640dd 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -21,7 +21,6 @@
 #include <sound/pxa2xx-lib.h>
 
 #include <asm/irq.h>
-#include <mach/hardware.h>
 #include <mach/regs-ac97.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/audio.h>
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 85cf591d4e1..ccec48fc8e3 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -20,8 +20,6 @@
 #include <sound/initval.h>
 #include <sound/pxa2xx-lib.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-ac97.h>
 #include <mach/audio.h>
 
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index 75a0d746fb6..108b643229b 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -12,8 +12,7 @@
 #include <sound/pcm_params.h>
 #include <sound/pxa2xx-lib.h>
 
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 
 #include "pxa2xx-pcm.h"
 
diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c
index 4690b8b5681..e570649184e 100644
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -692,6 +692,9 @@ static int snd_mixer_oss_put_volume1(struct snd_mixer_oss_file *fmixer,
 		snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_PVOLUME], left, right);
 		if (slot->present & SNDRV_MIXER_OSS_PRESENT_CVOLUME)
 			snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_CVOLUME], left, right);
+	} else if (slot->present & SNDRV_MIXER_OSS_PRESENT_CVOLUME) {
+		snd_mixer_oss_put_volume1_vol(fmixer, pslot,
+			slot->numid[SNDRV_MIXER_OSS_ITEM_CVOLUME], left, right);
 	} else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GVOLUME) {
 		snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_GVOLUME], left, right);
 	} else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GLOBAL) {
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 0a1798eafb0..699d2890535 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2872,7 +2872,7 @@ static void snd_pcm_oss_proc_write(struct snd_info_entry *entry,
 			setup = kmalloc(sizeof(*setup), GFP_KERNEL);
 			if (! setup) {
 				buffer->error = -ENOMEM;
-				mutex_lock(&pstr->oss.setup_mutex);
+				mutex_unlock(&pstr->oss.setup_mutex);
 				return;
 			}
 			if (pstr->oss.setup_list == NULL)
@@ -2886,7 +2886,7 @@ static void snd_pcm_oss_proc_write(struct snd_info_entry *entry,
 			if (! template.task_name) {
 				kfree(setup);
 				buffer->error = -ENOMEM;
-				mutex_lock(&pstr->oss.setup_mutex);
+				mutex_unlock(&pstr->oss.setup_mutex);
 				return;
 			}
 		}
diff --git a/sound/core/sgbuf.c b/sound/core/sgbuf.c
index d4564edd61d..4e7ec2b4987 100644
--- a/sound/core/sgbuf.c
+++ b/sound/core/sgbuf.c
@@ -38,6 +38,10 @@ int snd_free_sgbuf_pages(struct snd_dma_buffer *dmab)
 	if (! sgbuf)
 		return -EINVAL;
 
+	if (dmab->area)
+		vunmap(dmab->area);
+	dmab->area = NULL;
+
 	tmpb.dev.type = SNDRV_DMA_TYPE_DEV;
 	tmpb.dev.dev = sgbuf->dev;
 	for (i = 0; i < sgbuf->pages; i++) {
@@ -48,9 +52,6 @@ int snd_free_sgbuf_pages(struct snd_dma_buffer *dmab)
 		tmpb.bytes = (sgbuf->table[i].addr & ~PAGE_MASK) << PAGE_SHIFT;
 		snd_dma_free_pages(&tmpb);
 	}
-	if (dmab->area)
-		vunmap(dmab->area);
-	dmab->area = NULL;
 
 	kfree(sgbuf->table);
 	kfree(sgbuf->page_table);
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 58c972b2af0..b848d100186 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -550,21 +550,27 @@ static int __devinit snd_opl3sa2_mixer(struct snd_card *card)
 #ifdef CONFIG_PM
 static int snd_opl3sa2_suspend(struct snd_card *card, pm_message_t state)
 {
-	struct snd_opl3sa2 *chip = card->private_data;
+	if (card) {
+		struct snd_opl3sa2 *chip = card->private_data;
 
-	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
-	chip->wss->suspend(chip->wss);
-	/* power down */
-	snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D3);
+		snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+		chip->wss->suspend(chip->wss);
+		/* power down */
+		snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D3);
+	}
 
 	return 0;
 }
 
 static int snd_opl3sa2_resume(struct snd_card *card)
 {
-	struct snd_opl3sa2 *chip = card->private_data;
+	struct snd_opl3sa2 *chip;
 	int i;
 
+	if (!card)
+		return 0;
+
+	chip = card->private_data;
 	/* power up */
 	snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D0);
 
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 5e909e0da04..f3b5723c285 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2059,26 +2059,31 @@ static int __devinit check_position_fix(struct azx *chip, int fix)
 {
 	const struct snd_pci_quirk *q;
 
-	/* Check VIA HD Audio Controller exist */
-	if (chip->pci->vendor == PCI_VENDOR_ID_VIA &&
-	    chip->pci->device == VIA_HDAC_DEVICE_ID) {
+	switch (fix) {
+	case POS_FIX_LPIB:
+	case POS_FIX_POSBUF:
+		return fix;
+	}
+
+	/* Check VIA/ATI HD Audio Controller exist */
+	switch (chip->driver_type) {
+	case AZX_DRIVER_VIA:
+	case AZX_DRIVER_ATI:
 		chip->via_dmapos_patch = 1;
 		/* Use link position directly, avoid any transfer problem. */
 		return POS_FIX_LPIB;
 	}
 	chip->via_dmapos_patch = 0;
 
-	if (fix == POS_FIX_AUTO) {
-		q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
-		if (q) {
-			printk(KERN_INFO
-				    "hda_intel: position_fix set to %d "
-				    "for device %04x:%04x\n",
-				    q->value, q->subvendor, q->subdevice);
-			return q->value;
-		}
+	q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
+	if (q) {
+		printk(KERN_INFO
+		       "hda_intel: position_fix set to %d "
+		       "for device %04x:%04x\n",
+		       q->value, q->subvendor, q->subdevice);
+		return q->value;
 	}
-	return fix;
+	return POS_FIX_AUTO;
 }
 
 /*
@@ -2210,9 +2215,17 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	gcap = azx_readw(chip, GCAP);
 	snd_printdd("chipset global capabilities = 0x%x\n", gcap);
 
+	/* ATI chips seems buggy about 64bit DMA addresses */
+	if (chip->driver_type == AZX_DRIVER_ATI)
+		gcap &= ~0x01;
+
 	/* allow 64bit DMA address if supported by H/W */
 	if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK))
 		pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+	else {
+		pci_set_dma_mask(pci, DMA_32BIT_MASK);
+		pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+	}
 
 	/* read number of streams from GCAP register instead of using
 	 * hardcoded value
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 3bc427645da..6094344fb22 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1207,7 +1207,7 @@ static const char *slave_vols[] = {
 	"LFE Playback Volume",
 	"Side Playback Volume",
 	"Headphone Playback Volume",
-	"Headphone Playback Volume",
+	"Headphone2 Playback Volume",
 	"Speaker Playback Volume",
 	"External Speaker Playback Volume",
 	"Speaker2 Playback Volume",
@@ -1221,7 +1221,7 @@ static const char *slave_sws[] = {
 	"LFE Playback Switch",
 	"Side Playback Switch",
 	"Headphone Playback Switch",
-	"Headphone Playback Switch",
+	"Headphone2 Playback Switch",
 	"Speaker Playback Switch",
 	"External Speaker Playback Switch",
 	"Speaker2 Playback Switch",
@@ -3516,6 +3516,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
 	if (! spec->autocfg.line_outs)
 		return 0; /* can't find valid pin config */
 
+#if 0 /* FIXME: temporarily disabled */
 	/* If we have no real line-out pin and multiple hp-outs, HPs should
 	 * be set up as multi-channel outputs.
 	 */
@@ -3535,6 +3536,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
 		spec->autocfg.line_out_type = AUTO_PIN_HP_OUT;
 		spec->autocfg.hp_outs = 0;
 	}
+#endif /* FIXME: temporarily disabled */
 	if (spec->autocfg.mono_out_pin) {
 		int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
 			(AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index f23a73577c2..bb162507fe6 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -607,6 +607,7 @@ static int snd_mixart_hw_params(struct snd_pcm_substream *subs,
 	/* set the format to the board */
 	err = mixart_set_format(stream, format);
 	if(err < 0) {
+		mutex_unlock(&mgr->setup_mutex);
 		return err;
 	}
 
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 1ba25a55952..ec930667fef 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -25,8 +25,6 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/corgi.h>
 #include <mach/audio.h>
 
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 2e3386dfa0f..ac294c797b7 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -21,8 +21,6 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index fe4a729ea64..949be9c2a01 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -29,8 +29,6 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/audio.h>
 
 #include "../codecs/wm9712.h"
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 6e9827189ff..cad2c4c0ac9 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -26,8 +26,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/locomo.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/poodle.h>
 #include <mach/audio.h>
 
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 73cb6b4c2f2..1dfdf66fb1f 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -29,7 +29,7 @@
 #include <sound/pxa2xx-lib.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 #include <mach/regs-ssp.h>
 #include <mach/audio.h>
 #include <mach/ssp.h>
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 812c2b4d3e0..a4a655f7e30 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -20,8 +20,8 @@
 #include <sound/pxa2xx-lib.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-ac97.h>
+#include <mach/dma.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-ac97.h"
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 517991fb109..223de890259 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -24,7 +24,7 @@
 #include <sound/pxa2xx-lib.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/audio.h>
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index a3b9e6bdf97..de8778fa872 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -26,8 +26,6 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/spitz.h>
 #include "../codecs/wm8750.h"
 #include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index c77194f74c9..050223d04e5 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -30,8 +30,6 @@
 
 #include <asm/mach-types.h>
 #include <mach/tosa.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/audio.h>
 
 #include "../codecs/wm9712.h"