aboutsummaryrefslogtreecommitdiff
path: root/Documentation/DocBook/tulip-user.tmpl
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/DocBook/tulip-user.tmpl')
-rw-r--r--Documentation/DocBook/tulip-user.tmpl327
1 files changed, 0 insertions, 327 deletions
diff --git a/Documentation/DocBook/tulip-user.tmpl b/Documentation/DocBook/tulip-user.tmpl
deleted file mode 100644
index 6520d7a1b13..00000000000
--- a/Documentation/DocBook/tulip-user.tmpl
+++ /dev/null
@@ -1,327 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="TulipUserGuide">
- <bookinfo>
- <title>Tulip Driver User's Guide</title>
-
- <authorgroup>
- <author>
- <firstname>Jeff</firstname>
- <surname>Garzik</surname>
- <affiliation>
- <address>
- <email>jgarzik@pobox.com</email>
- </address>
- </affiliation>
- </author>
- </authorgroup>
-
- <copyright>
- <year>2001</year>
- <holder>Jeff Garzik</holder>
- </copyright>
-
- <legalnotice>
- <para>
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later
- version.
- </para>
-
- <para>
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
- </para>
-
- <para>
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- </para>
-
- <para>
- For more details see the file COPYING in the source
- distribution of Linux.
- </para>
- </legalnotice>
- </bookinfo>
-
- <toc></toc>
-
- <chapter id="intro">
- <title>Introduction</title>
-<para>
-The Tulip Ethernet Card Driver
-is maintained by Jeff Garzik (<email>jgarzik@pobox.com</email>).
-</para>
-
-<para>
-The Tulip driver was developed by Donald Becker and changed by
-Jeff Garzik, Takashi Manabe and a cast of thousands.
-</para>
-
-<para>
-For 2.4.x and later kernels, the Linux Tulip driver is available at
-<ulink url="http://sourceforge.net/projects/tulip/">http://sourceforge.net/projects/tulip/</ulink>
-</para>
-
-<para>
- This driver is for the Digital "Tulip" Ethernet adapter interface.
- It should work with most DEC 21*4*-based chips/ethercards, as well as
- with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and ASIX.
-</para>
-
-<para>
- The original author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation,
- 410 Severn Ave., Suite 210,
- Annapolis MD 21403
-</para>
-
-<para>
- Additional information on Donald Becker's tulip.c
- is available at <ulink url="http://www.scyld.com/network/tulip.html">http://www.scyld.com/network/tulip.html</ulink>
-</para>
-
- </chapter>
-
- <chapter id="drvr-compat">
- <title>Driver Compatibility</title>
-
-<para>
-This device driver is designed for the DECchip "Tulip", Digital's
-single-chip ethernet controllers for PCI (now owned by Intel).
-Supported members of the family
-are the 21040, 21041, 21140, 21140A, 21142, and 21143. Similar work-alike
-chips from Lite-On, Macronics, ASIX, Compex and other listed below are also
-supported.
-</para>
-
-<para>
-These chips are used on at least 140 unique PCI board designs. The great
-number of chips and board designs supported is the reason for the
-driver size and complexity. Almost of the increasing complexity is in the
-board configuration and media selection code. There is very little
-increasing in the operational critical path length.
-</para>
- </chapter>
-
- <chapter id="board-settings">
- <title>Board-specific Settings</title>
-
-<para>
-PCI bus devices are configured by the system at boot time, so no jumpers
-need to be set on the board. The system BIOS preferably should assign the
-PCI INTA signal to an otherwise unused system IRQ line.
-</para>
-
-<para>
-Some boards have EEPROMs tables with default media entry. The factory default
-is usually "autoselect". This should only be overridden when using
-transceiver connections without link beat e.g. 10base2 or AUI, or (rarely!)
-for forcing full-duplex when used with old link partners that do not do
-autonegotiation.
-</para>
- </chapter>
-
- <chapter id="driver-operation">
- <title>Driver Operation</title>
-
-<sect1><title>Ring buffers</title>
-
-<para>
-The Tulip can use either ring buffers or lists of Tx and Rx descriptors.
-This driver uses statically allocated rings of Rx and Tx descriptors, set at
-compile time by RX/TX_RING_SIZE. This version of the driver allocates skbuffs
-for the Rx ring buffers at open() time and passes the skb->data field to the
-Tulip as receive data buffers. When an incoming frame is less than
-RX_COPYBREAK bytes long, a fresh skbuff is allocated and the frame is
-copied to the new skbuff. When the incoming frame is larger, the skbuff is
-passed directly up the protocol stack and replaced by a newly allocated
-skbuff.
-</para>
-
-<para>
-The RX_COPYBREAK value is chosen to trade-off the memory wasted by
-using a full-sized skbuff for small frames vs. the copying costs of larger
-frames. For small frames the copying cost is negligible (esp. considering
-that we are pre-loading the cache with immediately useful header
-information). For large frames the copying cost is non-trivial, and the
-larger copy might flush the cache of useful data. A subtle aspect of this
-choice is that the Tulip only receives into longword aligned buffers, thus
-the IP header at offset 14 isn't longword aligned for further processing.
-Copied frames are put into the new skbuff at an offset of "+2", thus copying
-has the beneficial effect of aligning the IP header and preloading the
-cache.
-</para>
-
-</sect1>
-
-<sect1><title>Synchronization</title>
-<para>
-The driver runs as two independent, single-threaded flows of control. One
-is the send-packet routine, which enforces single-threaded use by the
-dev->tbusy flag. The other thread is the interrupt handler, which is single
-threaded by the hardware and other software.
-</para>
-
-<para>
-The send packet thread has partial control over the Tx ring and 'dev->tbusy'
-flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
-queue slot is empty, it clears the tbusy flag when finished otherwise it sets
-the 'tp->tx_full' flag.
-</para>
-
-<para>
-The interrupt handler has exclusive control over the Rx ring and records stats
-from the Tx ring. (The Tx-done interrupt can't be selectively turned off, so
-we can't avoid the interrupt overhead by having the Tx routine reap the Tx
-stats.) After reaping the stats, it marks the queue entry as empty by setting
-the 'base' to zero. Iff the 'tp->tx_full' flag is set, it clears both the
-tx_full and tbusy flags.
-</para>
-
-</sect1>
-
- </chapter>
-
- <chapter id="errata">
- <title>Errata</title>
-
-<para>
-The old DEC databooks were light on details.
-The 21040 databook claims that CSR13, CSR14, and CSR15 should each be the last
-register of the set CSR12-15 written. Hmmm, now how is that possible?
-</para>
-
-<para>
-The DEC SROM format is very badly designed not precisely defined, leading to
-part of the media selection junkheap below. Some boards do not have EEPROM
-media tables and need to be patched up. Worse, other boards use the DEC
-design kit media table when it isn't correct for their board.
-</para>
-
-<para>
-We cannot use MII interrupts because there is no defined GPIO pin to attach
-them. The MII transceiver status is polled using an kernel timer.
-</para>
- </chapter>
-
- <chapter id="changelog">
- <title>Driver Change History</title>
-
- <sect1><title>Version 0.9.14 (February 20, 2001)</title>
- <itemizedlist>
- <listitem><para>Fix PNIC problems (Manfred Spraul)</para></listitem>
- <listitem><para>Add new PCI id for Accton comet</para></listitem>
- <listitem><para>Support Davicom tulips</para></listitem>
- <listitem><para>Fix oops in eeprom parsing</para></listitem>
- <listitem><para>Enable workarounds for early PCI chipsets</para></listitem>
- <listitem><para>IA64, hppa csr0 support</para></listitem>
- <listitem><para>Support media types 5, 6</para></listitem>
- <listitem><para>Interpret a bit more of the 21142 SROM extended media type 3</para></listitem>
- <listitem><para>Add missing delay in eeprom reading</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.11 (November 3, 2000)</title>
- <itemizedlist>
- <listitem><para>Eliminate extra bus accesses when sharing interrupts (prumpf)</para></listitem>
- <listitem><para>Barrier following ownership descriptor bit flip (prumpf)</para></listitem>
- <listitem><para>Endianness fixes for >14 addresses in setup frames (prumpf)</para></listitem>
- <listitem><para>Report link beat to kernel/userspace via netif_carrier_*. (kuznet)</para></listitem>
- <listitem><para>Better spinlocking in set_rx_mode.</para></listitem>
- <listitem><para>Fix I/O resource request failure error messages (DaveM catch)</para></listitem>
- <listitem><para>Handle DMA allocation failure.</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.10 (September 6, 2000)</title>
- <itemizedlist>
- <listitem><para>Simple interrupt mitigation (via jamal)</para></listitem>
- <listitem><para>More PCI ids</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.9 (August 11, 2000)</title>
- <itemizedlist>
- <listitem><para>More PCI ids</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.8 (July 13, 2000)</title>
- <itemizedlist>
- <listitem><para>Correct signed/unsigned comparison for dummy frame index</para></listitem>
- <listitem><para>Remove outdated references to struct enet_statistics</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.7 (June 17, 2000)</title>
- <itemizedlist>
- <listitem><para>Timer cleanups (Andrew Morton)</para></listitem>
- <listitem><para>Alpha compile fix (somebody?)</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.6 (May 31, 2000)</title>
- <itemizedlist>
- <listitem><para>Revert 21143-related support flag patch</para></listitem>
- <listitem><para>Add HPPA/media-table debugging printk</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.5 (May 30, 2000)</title>
- <itemizedlist>
- <listitem><para>HPPA support (willy@puffingroup)</para></listitem>
- <listitem><para>CSR6 bits and tulip.h cleanup (Chris Smith)</para></listitem>
- <listitem><para>Improve debugging messages a bit</para></listitem>
- <listitem><para>Add delay after CSR13 write in t21142_start_nway</para></listitem>
- <listitem><para>Remove unused ETHER_STATS code</para></listitem>
- <listitem><para>Convert 'extern inline' to 'static inline' in tulip.h (Chris Smith)</para></listitem>
- <listitem><para>Update DS21143 support flags in tulip_chip_info[]</para></listitem>
- <listitem><para>Use spin_lock_irq, not _irqsave/restore, in tulip_start_xmit()</para></listitem>
- <listitem><para>Add locking to set_rx_mode()</para></listitem>
- <listitem><para>Fix race with chip setting DescOwned bit (Hal Murray)</para></listitem>
- <listitem><para>Request 100% of PIO and MMIO resource space assigned to card</para></listitem>
- <listitem><para>Remove error message from pci_enable_device failure</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.4.3 (April 14, 2000)</title>
- <itemizedlist>
- <listitem><para>mod_timer fix (Hal Murray)</para></listitem>
- <listitem><para>PNIC2 resuscitation (Chris Smith)</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.4.2 (March 21, 2000)</title>
- <itemizedlist>
- <listitem><para>Fix 21041 CSR7, CSR13/14/15 handling</para></listitem>
- <listitem><para>Merge some PCI ids from tulip 0.91x</para></listitem>
- <listitem><para>Merge some HAS_xxx flags and flag settings from tulip 0.91x</para></listitem>
- <listitem><para>asm/io.h fix (submitted by many) and cleanup</para></listitem>
- <listitem><para>s/HAS_NWAY143/HAS_NWAY/</para></listitem>
- <listitem><para>Cleanup 21041 mode reporting</para></listitem>
- <listitem><para>Small code cleanups</para></listitem>
- </itemizedlist>
- </sect1>
-
- <sect1><title>Version 0.9.4.1 (March 18, 2000)</title>
- <itemizedlist>
- <listitem><para>Finish PCI DMA conversion (davem)</para></listitem>
- <listitem><para>Do not netif_start_queue() at end of tulip_tx_timeout() (kuznet)</para></listitem>
- <listitem><para>PCI DMA fix (kuznet)</para></listitem>
- <listitem><para>eeprom.c code cleanup</para></listitem>
- <listitem><para>Remove Xircom Tulip crud</para></listitem>
- </itemizedlist>
- </sect1>
- </chapter>
-
-</book>