diff options
Diffstat (limited to 'Documentation/powerpc/booting-without-of.txt')
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 108 |
1 files changed, 101 insertions, 7 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 1d2a772506c..b68684d39f9 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -57,7 +57,11 @@ Table of Contents n) 4xx/Axon EMAC ethernet nodes o) Xilinx IP cores p) Freescale Synchronous Serial Interface - q) USB EHCI controllers + q) USB EHCI controllers + r) Freescale Display Interface Unit + s) Freescale on board FPGA + t) Freescael MSI interrupt controller + u) Freescale General-purpose Timers Module VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -1360,14 +1364,11 @@ platforms are moved over to use the flattened-device-tree model. pic@40000 { linux,phandle = <40000>; - clock-frequency = <0>; interrupt-controller; #address-cells = <0>; reg = <40000 40000>; - built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; - big-endian; }; @@ -1735,6 +1736,33 @@ platforms are moved over to use the flattened-device-tree model. ...... }; + Note that "par_io" nodes are obsolete, and should not be used for + the new device trees. Instead, each Par I/O bank should be represented + via its own gpio-controller node: + + Required properties: + - #gpio-cells : should be "2". + - compatible : should be "fsl,<chip>-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank". + - reg : offset to the register set and its length. + - gpio-controller : node to identify gpio controllers. + + Example: + qe_pio_a: gpio-controller@1400 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1400 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; vi) Pin configuration nodes @@ -2870,6 +2898,75 @@ platforms are moved over to use the flattened-device-tree model. reg = <0xe8000000 32>; }; + t) Freescale MSI interrupt controller + + Reguired properities: + - compatible : compatible list, contains 2 entries, + first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, + etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on + the parent type. + - reg : should contain the address and the length of the shared message + interrupt register set. + - msi-available-ranges: use <start count> style section to define which + msi interrupt can be used in the 256 msi interrupts. This property is + optional, without this, all the 256 MSI interrupts can be used. + - interrupts : each one of the interrupts here is one entry per 32 MSIs, + and routed to the host interrupt controller. the interrupts should + be set as edge sensitive. + - interrupt-parent: the phandle for the interrupt controller + that services interrupts for this device. for 83xx cpu, the interrupts + are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed + to MPIC. + + Example + msi@41600 { + compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + u) Freescale General-purpose Timers Module + + Required properties: + - compatible : should be + "fsl,<chip>-gtm", "fsl,gtm" for SOC GTMs + "fsl,<chip>-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs + "fsl,<chip>-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs + - reg : should contain gtm registers location and length (0x40). + - interrupts : should contain four interrupts. + - interrupt-parent : interrupt source phandle. + - clock-frequency : specifies the frequency driving the timer. + + Example: + + timer@500 { + compatible = "fsl,mpc8360-gtm", "fsl,gtm"; + reg = <0x500 0x40>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + /* filled by u-boot */ + clock-frequency = <0>; + }; + + timer@440 { + compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* filled by u-boot */ + clock-frequency = <0>; + }; + VII - Marvell Discovery mv64[345]6x System Controller chips =========================================================== @@ -3622,14 +3719,11 @@ not necessary as they are usually the same as the root node. pic@40000 { linux,phandle = <40000>; - clock-frequency = <0>; interrupt-controller; #address-cells = <0>; reg = <40000 40000>; - built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; - big-endian; }; i2c@3000 { |