aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/s390/CommonIO11
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt62
-rw-r--r--Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl62
3 files changed, 98 insertions, 37 deletions
diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO
index bf0baa19ec2..339207d11d9 100644
--- a/Documentation/s390/CommonIO
+++ b/Documentation/s390/CommonIO
@@ -70,13 +70,19 @@ Command line parameters
Note: While already known devices can be added to the list of devices to be
ignored, there will be no effect on then. However, if such a device
- disappears and then reappears, it will then be ignored.
+ disappears and then reappears, it will then be ignored. To make
+ known devices go away, you need the "purge" command (see below).
For example,
"echo add 0.0.a000-0.0.accc, 0.0.af00-0.0.afff > /proc/cio_ignore"
will add 0.0.a000-0.0.accc and 0.0.af00-0.0.afff to the list of ignored
devices.
+ You can remove already known but now ignored devices via
+ "echo purge > /proc/cio_ignore"
+ All devices ignored but still registered and not online (= not in use)
+ will be deregistered and thus removed from the system.
+
The devices can be specified either by bus id (0.x.abcd) or, for 2.4 backward
compatibility, by the device number in hexadecimal (0xabcd or abcd). Device
numbers given as 0xabcd will be interpreted as 0.0.abcd.
@@ -98,8 +104,7 @@ debugfs entries
handling).
- /sys/kernel/debug/s390dbf/cio_msg/sprintf
- Various debug messages from the common I/O-layer, including messages
- printed when cio_msg=yes.
+ Various debug messages from the common I/O-layer.
- /sys/kernel/debug/s390dbf/cio_trace/hex_ascii
Logs the calling of functions in the common I/O-layer and, if applicable,
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index b117e42a616..e0e54a27fc1 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -746,8 +746,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-hda-intel
--------------------
- Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
- ATI SB450, SB600, RS600,
+ Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
+ PCH, SCH),
+ ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
+ RV630, RV635, RV670, RV770,
VIA VT8251/VT8237A,
SIS966, ULI M5461
@@ -807,6 +809,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ALC260
hp HP machines
hp-3013 HP machines (3013-variant)
+ hp-dc7600 HP DC7600
fujitsu Fujitsu S7020
acer Acer TravelMate
will Will laptops (PB V7900)
@@ -828,8 +831,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
hippo Hippo (ATI) with jack detection, Sony UX-90s
hippo_1 Hippo (Benq) with jack detection
sony-assamd Sony ASSAMD
+ toshiba-s06 Toshiba S06
+ toshiba-rx1 Toshiba RX1
ultra Samsung Q1 Ultra Vista model
lenovo-3000 Lenovo 3000 y410
+ nec NEC Versa S9100
basic fixed pin assignment w/o SPDIF
auto auto-config reading BIOS (default)
@@ -838,6 +844,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
3stack 3-stack model
toshiba Toshiba A205
acer Acer laptops
+ acer-aspire Acer Aspire One
dell Dell OEM laptops (Vostro 1200)
zepto Zepto laptops
test for testing/debugging purpose, almost all controls can
@@ -847,6 +854,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ALC269
basic Basic preset
+ quanta Quanta FL1
+ eeepc-p703 ASUS Eeepc P703 P900A
+ eeepc-p901 ASUS Eeepc P901 S101
ALC662/663
3stack-dig 3-stack (2-channel) with SPDIF
@@ -856,10 +866,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
lenovo-101e Lenovo laptop
eeepc-p701 ASUS Eeepc P701
eeepc-ep20 ASUS Eeepc EP20
+ ecs ECS/Foxconn mobo
m51va ASUS M51VA
g71v ASUS G71V
h13 ASUS H13
g50v ASUS G50V
+ asus-mode1 ASUS
+ asus-mode2 ASUS
+ asus-mode3 ASUS
+ asus-mode4 ASUS
+ asus-mode5 ASUS
+ asus-mode6 ASUS
auto auto-config reading BIOS (default)
ALC882/885
@@ -891,12 +908,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
lenovo-101e Lenovo 101E
lenovo-nb0763 Lenovo NB0763
lenovo-ms7195-dig Lenovo MS7195
+ lenovo-sky Lenovo Sky
haier-w66 Haier W66
3stack-hp HP machines with 3stack (Lucknow, Samba boards)
6stack-dell Dell machines with 6stack (Inspiron 530)
mitac Mitac 8252D
clevo-m720 Clevo M720 laptop series
fujitsu-pi2515 Fujitsu AMILO Pi2515
+ 3stack-6ch-intel Intel DG33* boards
auto auto-config reading BIOS (default)
ALC861/660
@@ -929,7 +948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
allout 5-jack in back, 2-jack in front, SPDIF out
auto auto-config reading BIOS (default)
- AD1882
+ AD1882 / AD1882A
3stack 3-stack mode (default)
6stack 6-stack mode
@@ -1079,7 +1098,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
register value without FIFO size correction as the current
DMA pointer. position_fix=2 will make the driver to use
the position buffer instead of reading SD_LPIB register.
- (Usually SD_LPLIB register is more accurate than the
+ (Usually SD_LPIB register is more accurate than the
position buffer.)
NB: If you get many "azx_get_response timeout" messages at
@@ -1166,6 +1185,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* Event Electronics, EZ8
* Digigram VX442
* Lionstracs, Mediastaton
+ * Terrasoniq TS 88
model - Use the given board model, one of the following:
delta1010, dio2496, delta66, delta44, audiophile, delta410,
@@ -1200,7 +1220,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* TerraTec Phase 22
* TerraTec Phase 28
* AudioTrak Prodigy 7.1
- * AudioTrak Prodigy 7.1LT
+ * AudioTrak Prodigy 7.1 LT
+ * AudioTrak Prodigy 7.1 XT
+ * AudioTrak Prodigy 7.1 HIFI
+ * AudioTrak Prodigy 7.1 HD2
* AudioTrak Prodigy 192
* Pontis MS300
* Albatron K8X800 Pro II
@@ -1211,12 +1234,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* Shuttle SN25P
* Onkyo SE-90PCI
* Onkyo SE-200PCI
+ * ESI Juli@
+ * Hercules Fortissimo IV
+ * EGO-SYS WaveTerminal 192M
model - Use the given board model, one of the following:
revo51, revo71, amp2000, prodigy71, prodigy71lt,
- prodigy192, aureon51, aureon71, universe, ap192,
- k8x800, phase22, phase28, ms300, av710, se200pci,
- se90pci
+ prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
+ juli, aureon51, aureon71, universe, ap192, k8x800,
+ phase22, phase28, ms300, av710, se200pci, se90pci,
+ fortissimo4, sn25p, WT192M
This module supports multiple cards and autoprobe.
@@ -1255,7 +1282,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for AC'97 motherboards from Intel and compatibles.
* Intel i810/810E, i815, i820, i830, i84x, MX440
- ICH5, ICH6, ICH7, ESB2
+ ICH5, ICH6, ICH7, 6300ESB, ESB2
* SiS 7012 (SiS 735)
* NVidia NForce, NForce2, NForce3, MCP04, CK804
CK8, CK8S, MCP501
@@ -1951,6 +1978,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* CHIC True Sound 4Dwave
* Shark Predator4D-PCI
* Jaton SonicWave 4D
+ * SiS SI7018 PCI Audio
+ * Hoontech SoundTrack Digital 4DWave NX
pcm_channels - max channels (voices) reserved for PCM
wavetable_size - max wavetable size in kB (4-?kb)
@@ -1966,12 +1995,25 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
vid - Vendor ID for the device (optional)
pid - Product ID for the device (optional)
+ nrpacks - Max. number of packets per URB (default: 8)
+ async_unlink - Use async unlink mode (default: yes)
device_setup - Device specific magic number (optional)
- Influence depends on the device
- Default: 0x0000
+ ignore_ctl_error - Ignore any USB-controller regarding mixer
+ interface (default: no)
This module supports multiple devices, autoprobe and hotplugging.
+ NB: nrpacks parameter can be modified dynamically via sysfs.
+ Don't put the value over 20. Changing via sysfs has no sanity
+ check.
+ NB: async_unlink=0 would cause Oops. It remains just for
+ debugging purpose (if any).
+ NB: ignore_ctl_error=1 may help when you get an error at accessing
+ the mixer element such as URB error -22. This happens on some
+ buggy USB device or the controller.
+
Module snd-usb-caiaq
--------------------
@@ -2078,7 +2120,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
-------------------
Module for sound cards based on the Asus AV100/AV200 chips,
- i.e., Xonar D1, DX, D2 and D2X.
+ i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
This module supports autoprobe and multiple cards.
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index e13c4e67029..b54cb5048df 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -6135,44 +6135,58 @@ struct _snd_pcm_runtime {
</para>
</section>
- <section id="useful-functions-snd-assert">
- <title><function>snd_assert()</function></title>
+ <section id="useful-functions-snd-bug">
+ <title><function>snd_BUG()</function></title>
<para>
- <function>snd_assert()</function> macro is similar with the
- normal <function>assert()</function> macro. For example,
+ It shows the <computeroutput>BUG?</computeroutput> message and
+ stack trace as well as <function>snd_BUG_ON</function> at the point.
+ It's useful to show that a fatal error happens there.
+ </para>
+ <para>
+ When no debug flag is set, this macro is ignored.
+ </para>
+ </section>
+
+ <section id="useful-functions-snd-bug-on">
+ <title><function>snd_BUG_ON()</function></title>
+ <para>
+ <function>snd_BUG_ON()</function> macro is similar with
+ <function>WARN_ON()</function> macro. For example,
<informalexample>
<programlisting>
<![CDATA[
- snd_assert(pointer != NULL, return -EINVAL);
+ snd_BUG_ON(!pointer);
]]>
</programlisting>
</informalexample>
- </para>
- <para>
- The first argument is the expression to evaluate, and the
- second argument is the action if it fails. When
- <constant>CONFIG_SND_DEBUG</constant>, is set, it will show an
- error message such as <computeroutput>BUG? (xxx)</computeroutput>
- together with stack trace.
- </para>
- <para>
- When no debug flag is set, this macro is ignored.
- </para>
- </section>
+ or it can be used as the condition,
+ <informalexample>
+ <programlisting>
+<![CDATA[
+ if (snd_BUG_ON(non_zero_is_bug))
+ return -EINVAL;
+]]>
+ </programlisting>
+ </informalexample>
- <section id="useful-functions-snd-bug">
- <title><function>snd_BUG()</function></title>
- <para>
- It shows the <computeroutput>BUG?</computeroutput> message and
- stack trace as well as <function>snd_assert</function> at the point.
- It's useful to show that a fatal error happens there.
</para>
+
<para>
- When no debug flag is set, this macro is ignored.
+ The macro takes an conditional expression to evaluate.
+ When <constant>CONFIG_SND_DEBUG</constant>, is set, the
+ expression is actually evaluated. If it's non-zero, it shows
+ the warning message such as
+ <computeroutput>BUG? (xxx)</computeroutput>
+ normally followed by stack trace. It returns the evaluated
+ value.
+ When no <constant>CONFIG_SND_DEBUG</constant> is set, this
+ macro always returns zero.
</para>
+
</section>
+
</chapter>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 00:19:35 +0000