diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/DMA-mapping.txt | 2 | ||||
| -rw-r--r-- | Documentation/HOWTO | 3 | ||||
| -rw-r--r-- | Documentation/SubmitChecklist | 2 | ||||
| -rw-r--r-- | Documentation/cpu-freq/index.txt | 10 | ||||
| -rw-r--r-- | Documentation/hwmon/adt7473 | 18 | ||||
| -rw-r--r-- | Documentation/hwmon/sysfs-interface | 12 | ||||
| -rw-r--r-- | Documentation/ioctl/cdrom.txt | 4 | ||||
| -rw-r--r-- | Documentation/sysctl/kernel.txt | 7 | ||||
| -rw-r--r-- | Documentation/usb/anchors.txt | 12 | ||||
| -rw-r--r-- | Documentation/video4linux/CARDLIST.em28xx | 2 | ||||
| -rw-r--r-- | Documentation/video4linux/gspca.txt | 1 |
11 files changed, 46 insertions, 27 deletions
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index b463ecd0c7c..c74fec8c235 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -740,7 +740,7 @@ failure can be determined by: dma_addr_t dma_handle; dma_handle = pci_map_single(pdev, addr, size, direction); - if (pci_dma_mapping_error(dma_handle)) { + if (pci_dma_mapping_error(pdev, dma_handle)) { /* * reduce current DMA mapping usage, * delay and try again later or diff --git a/Documentation/HOWTO b/Documentation/HOWTO index c2371c5a98f..48a3955f05f 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -77,7 +77,8 @@ documentation files are also added which explain how to use the feature. When a kernel change causes the interface that the kernel exposes to userspace to change, it is recommended that you send the information or a patch to the manual pages explaining the change to the manual pages -maintainer at mtk.manpages@gmail.com. +maintainer at mtk.manpages@gmail.com, and CC the list +linux-api@vger.kernel.org. Here is a list of files that are in the kernel source tree that are required reading: diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist index da10e071424..21f0795af20 100644 --- a/Documentation/SubmitChecklist +++ b/Documentation/SubmitChecklist @@ -67,6 +67,8 @@ kernel patches. 19: All new userspace interfaces are documented in Documentation/ABI/. See Documentation/ABI/README for more information. + Patches that change userspace interfaces should be CCed to + linux-api@vger.kernel.org. 20: Check that it all passes `make headers_check'. diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt index ffdb5323df3..3d0b915035b 100644 --- a/Documentation/cpu-freq/index.txt +++ b/Documentation/cpu-freq/index.txt @@ -35,11 +35,9 @@ Mailing List ------------ There is a CPU frequency changing CVS commit and general list where you can report bugs, problems or submit patches. To post a message, -send an email to cpufreq@lists.linux.org.uk, to subscribe go to -http://lists.linux.org.uk/mailman/listinfo/cpufreq. Previous post to the -mailing list are available to subscribers at -http://lists.linux.org.uk/mailman/private/cpufreq/. - +send an email to cpufreq@vger.kernel.org, to subscribe go to +http://vger.kernel.org/vger-lists.html#cpufreq and follow the +instructions there. Links ----- @@ -50,7 +48,7 @@ how to access the CVS repository: * http://cvs.arm.linux.org.uk/ the CPUFreq Mailing list: -* http://lists.linux.org.uk/mailman/listinfo/cpufreq +* http://vger.kernel.org/vger-lists.html#cpufreq Clock and voltage scaling for the SA-1100: * http://www.lartmaker.nl/projects/scaling diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 index 2126de34c71..1cbf671822e 100644 --- a/Documentation/hwmon/adt7473 +++ b/Documentation/hwmon/adt7473 @@ -14,14 +14,14 @@ Description This driver implements support for the Analog Devices ADT7473 chip family. -The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 +The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0 specification. Using an analog to digital converter it measures three (3) -temperatures and two (2) voltages. It has three (3) 16-bit counters for +temperatures and two (2) voltages. It has four (4) 16-bit counters for measuring fan speed. There are three (3) PWM outputs that can be used to control fan speed. A sophisticated control system for the PWM outputs is designed into the -LM85 that allows fan speed to be adjusted automatically based on any of the +ADT7473 that allows fan speed to be adjusted automatically based on any of the three temperature sensors. Each PWM output is individually adjustable and programmable. Once configured, the ADT7473 will adjust the PWM outputs in response to the measured temperatures without further host intervention. @@ -46,14 +46,6 @@ from the raw value to get the temperature value. The Analog Devices datasheet is very detailed and describes a procedure for determining an optimal configuration for the automatic PWM control. -Hardware Configurations ------------------------ - -The ADT7473 chips have an optional SMBALERT output that can be used to -signal the chipset in case a limit is exceeded or the temperature sensors -fail. Individual sensor interrupts can be masked so they won't trigger -SMBALERT. The SMBALERT output if configured replaces the PWM2 function. - Configuration Notes ------------------- @@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following: * PWM Control -* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and -* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - point1: Set the pwm speed at a lower temperature bound. point2: Set the pwm speed at a higher temperature bound. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2d845730d4e..6dbfd5efd99 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -329,6 +329,10 @@ power[1-*]_average Average power use Unit: microWatt RO +power[1-*]_average_interval Power use averaging interval + Unit: milliseconds + RW + power[1-*]_average_highest Historical average maximum power use Unit: microWatt RO @@ -354,6 +358,14 @@ power[1-*]_reset_history Reset input_highest, input_lowest, WO ********** +* Energy * +********** + +energy[1-*]_input Cumulative energy use + Unit: microJoule + RO + +********** * Alarms * ********** diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt index 62d4af44ec4..59df81c8da2 100644 --- a/Documentation/ioctl/cdrom.txt +++ b/Documentation/ioctl/cdrom.txt @@ -271,14 +271,14 @@ CDROMCLOSETRAY pendant of CDROMEJECT usage: - ioctl(fd, CDROMEJECT, 0); + ioctl(fd, CDROMCLOSETRAY, 0); inputs: none outputs: none error returns: - ENOSYS cd drive not capable of ejecting + ENOSYS cd drive not capable of closing the tray EBUSY other processes are accessing drive, or door is locked notes: diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 276a7e63782..e1ff0d920a5 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -351,9 +351,10 @@ kernel. This value defaults to SHMMAX. softlockup_thresh: -This value can be used to lower the softlockup tolerance -threshold. The default threshold is 10s. If a cpu is locked up -for 10s, the kernel complains. Valid values are 1-60s. +This value can be used to lower the softlockup tolerance threshold. The +default threshold is 60 seconds. If a cpu is locked up for 60 seconds, +the kernel complains. Valid values are 1-60 seconds. Setting this +tunable to zero will disable the softlockup detection altogether. ============================================================== diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt index 7304bcf5a30..5e6b64c20d2 100644 --- a/Documentation/usb/anchors.txt +++ b/Documentation/usb/anchors.txt @@ -42,9 +42,21 @@ This function kills all URBs associated with an anchor. The URBs are called in the reverse temporal order they were submitted. This way no data can be reordered. +usb_unlink_anchored_urbs() +-------------------------- + +This function unlinks all URBs associated with an anchor. The URBs +are processed in the reverse temporal order they were submitted. +This is similar to usb_kill_anchored_urbs(), but it will not sleep. +Therefore no guarantee is made that the URBs have been unlinked when +the call returns. They may be unlinked later but will be unlinked in +finite time. + usb_wait_anchor_empty_timeout() ------------------------------- This function waits for all URBs associated with an anchor to finish or a timeout, whichever comes first. Its return value will tell you whether the timeout was reached. + + diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 89c7f32abf9..53449cb99b1 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -46,7 +46,7 @@ 45 -> Pinnacle PCTV DVB-T (em2870) 46 -> Compro, VideoMate U3 (em2870) [185b:2870] 47 -> KWorld DVB-T 305U (em2880) [eb1a:e305] - 48 -> KWorld DVB-T 310U (em2880) + 48 -> KWorld DVB-T 310U (em2880) [eb1a:e310] 49 -> MSI DigiVox A/D (em2880) [eb1a:e310] 50 -> MSI DigiVox A/D II (em2880) [eb1a:e320] 51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c] diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 0f03900c48f..9a3e4d797fa 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -190,6 +190,7 @@ pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x pac7311 093a:2624 PAC7302 pac7311 093a:2626 Labtec 2200 +pac7311 093a:262a Webcam 300k zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 |