aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/aoe/todo.txt2
-rw-r--r--Documentation/block/biodoc.txt2
-rw-r--r--Documentation/cciss.txt2
-rw-r--r--Documentation/cputopology.txt2
-rw-r--r--Documentation/devices.txt4
-rw-r--r--Documentation/fb/sstfb.txt10
-rw-r--r--Documentation/filesystems/dlmfs.txt2
-rw-r--r--Documentation/filesystems/ntfs.txt2
-rw-r--r--Documentation/filesystems/sysfs.txt2
-rw-r--r--Documentation/hrtimers.txt2
-rw-r--r--Documentation/input/atarikbd.txt2
-rw-r--r--Documentation/input/cs461x.txt2
-rw-r--r--Documentation/input/ff.txt2
-rw-r--r--Documentation/input/input.txt2
-rw-r--r--Documentation/kobject.txt2
-rw-r--r--Documentation/md.txt6
-rw-r--r--Documentation/networking/NAPI_HOWTO.txt2
-rw-r--r--Documentation/networking/gen_stats.txt4
-rw-r--r--Documentation/networking/pktgen.txt2
-rw-r--r--Documentation/networking/wan-router.txt2
-rw-r--r--Documentation/nfsroot.txt2
-rw-r--r--Documentation/power/pci.txt2
-rw-r--r--Documentation/powerpc/booting-without-of.txt2
-rw-r--r--Documentation/rocket.txt4
-rw-r--r--Documentation/s390/Debugging390.txt27
-rw-r--r--Documentation/s390/cds.txt2
-rw-r--r--Documentation/s390/s390dbf.txt2
-rw-r--r--Documentation/scsi/ncr53c8xx.txt6
-rw-r--r--Documentation/scsi/scsi_eh.txt2
-rw-r--r--Documentation/scsi/tmscsim.txt2
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt4
-rw-r--r--Documentation/sound/alsa/Audiophile-Usb.txt2
-rw-r--r--Documentation/sound/alsa/MIXART.txt2
-rw-r--r--Documentation/sound/alsa/Procfile.txt2
-rw-r--r--Documentation/usb/error-codes.txt2
-rw-r--r--Documentation/usb/mtouchusb.txt2
-rw-r--r--Documentation/video4linux/meye.txt2
-rw-r--r--Documentation/video4linux/zr36120.txt4
38 files changed, 63 insertions, 64 deletions
diff --git a/Documentation/aoe/todo.txt b/Documentation/aoe/todo.txt
index 7fee1e1165b..c09dfad4aed 100644
--- a/Documentation/aoe/todo.txt
+++ b/Documentation/aoe/todo.txt
@@ -7,7 +7,7 @@ not been observed, but it would be nice to eliminate any potential for
deadlock under memory pressure.
Because ATA over Ethernet is not fragmented by the kernel's IP code,
-the destructore member of the struct sk_buff is available to the aoe
+the destructor member of the struct sk_buff is available to the aoe
driver. By using a mempool for allocating all but the first few
sk_buffs, and by registering a destructor, we should be able to
efficiently allocate sk_buffs without introducing any potential for
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index f989a9e839b..3646a0aaea8 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -1203,6 +1203,6 @@ temporarily map a bio into the virtual address space.
and Linus' comments - Jan 2001)
9.2 Discussions about kiobuf and bh design on lkml between sct, linus, alan
et al - Feb-March 2001 (many of the initial thoughts that led to bio were
-brought up in this discusion thread)
+brought up in this discussion thread)
9.3 Discussions on mempool on lkml - Dec 2001.
diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt
index 45a738b8150..f74affe5c82 100644
--- a/Documentation/cciss.txt
+++ b/Documentation/cciss.txt
@@ -80,7 +80,7 @@ the /proc filesystem entry which the "block" side of the driver creates as
the SCSI core may not yet be initialized (because the driver is a block
driver) and attempting to register it with the SCSI core in such a case
would cause a hang. This is best done via an initialization script
-(typically in /etc/init.d, but could vary depending on distibution).
+(typically in /etc/init.d, but could vary depending on distribution).
For example:
for x in /proc/driver/cciss/cciss[0-9]*
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt
index 2b28e9ec4e3..b61cb956402 100644
--- a/Documentation/cputopology.txt
+++ b/Documentation/cputopology.txt
@@ -26,7 +26,7 @@ The type of **_id is int.
The type of siblings is cpumask_t.
To be consistent on all architectures, the 4 attributes should have
-deafult values if their values are unavailable. Below is the rule.
+default values if their values are unavailable. Below is the rule.
1) physical_package_id: If cpu has no physical package id, -1 is the
default value.
2) core_id: If cpu doesn't support multi-core, its core id is 0.
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index addc67b1d77..682e1e7018f 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -3205,7 +3205,7 @@ for a session; this includes virtual consoles, serial ports, and
pseudoterminals (PTYs).
All terminal devices share a common set of capabilities known as line
-diciplines; these include the common terminal line dicipline as well
+disciplines; these include the common terminal line discipline as well
as SLIP and PPP modes.
All terminal devices are named similarly; this section explains the
@@ -3285,7 +3285,7 @@ port TTY, for which no alternate device would exist.
Pseudoterminals (PTYs)
Pseudoterminals, or PTYs, are used to create login sessions or provide
-other capabilities requiring a TTY line dicipline (including SLIP or
+other capabilities requiring a TTY line discipline (including SLIP or
PPP capability) to arbitrary data-generation processes. Each PTY has
a master side, named /dev/pty[p-za-e][0-9a-f], and a slave side, named
/dev/tty[p-za-e][0-9a-f]. The kernel arbitrates the use of PTYs by
diff --git a/Documentation/fb/sstfb.txt b/Documentation/fb/sstfb.txt
index f21bec8c0a2..c7088c6d5df 100644
--- a/Documentation/fb/sstfb.txt
+++ b/Documentation/fb/sstfb.txt
@@ -48,12 +48,12 @@ Module Usage
Module insertion:
# insmod sstfb.o
- you should see some strange output frome the board:
+ you should see some strange output from the board:
a big blue square, a green and a red small squares and a vertical
- white rectangle. why ? the function's name is self explanatory :
+ white rectangle. why? the function's name is self-explanatory:
"sstfb_test()"...
(if you don't have a second monitor, you'll have to plug your monitor
- directely to the 2D videocard to see what you're typing)
+ directly to the 2D videocard to see what you're typing)
# con2fb /dev/fbx /dev/ttyx
bind a tty to the new frame buffer. if you already have a frame
buffer driver, the voodoo fb will likely be /dev/fb1. if not,
@@ -95,11 +95,11 @@ inverse=1 inverse Supposed to enable inverse console.
clipping=1 clipping Enable or disable clipping.
clipping=0 noclipping With clipping enabled, all offscreen
- reads and writes are disgarded.
+ reads and writes are discarded.
Default: enable clipping.
gfxclk=x gfxclk:x Force graphic clock frequency (in MHz).
- Be carefull with this option, it may be
+ Be careful with this option, it may be
DANGEROUS.
Default: auto
50Mhz for Voodoo 1,
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt
index 9afab845a90..c50bbb2d52b 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.txt
@@ -68,7 +68,7 @@ request for an already acquired lock will not generate another DLM
call. Userspace programs are assumed to handle their own local
locking.
-Two levels of locks are supported - Shared Read, and Exlcusive.
+Two levels of locks are supported - Shared Read, and Exclusive.
Also supported is a Trylock operation.
For information on the libo2dlm interface, please see o2dlm.h,
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index 638cbd3d2b0..9175f44c9c6 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -390,7 +390,7 @@ stripes with parity, i.e. raid level 5, should not work, too.
You have to use the "persistent-superblock 0" option for each raid-disk in the
NTFS volume/stripe you are configuring in /etc/raidtab as the persistent
-superblock used by the MD driver would damange the NTFS volume.
+superblock used by the MD driver would damage the NTFS volume.
Windows by default uses a stripe chunk size of 64k, so you probably want the
"chunk-size 64k" option for each raid-disk, too.
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 89b1d196ca8..4b5ca26e504 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -238,7 +238,7 @@ Top Level Directory Layout
The sysfs directory arrangement exposes the relationship of kernel
data structures.
-The top level sysfs diretory looks like:
+The top level sysfs directory looks like:
block/
bus/
diff --git a/Documentation/hrtimers.txt b/Documentation/hrtimers.txt
index 7620ff735fa..acad3a9b16c 100644
--- a/Documentation/hrtimers.txt
+++ b/Documentation/hrtimers.txt
@@ -10,7 +10,7 @@ back and forth trying to integrate high-resolution and high-precision
features into the existing timer framework, and after testing various
such high-resolution timer implementations in practice, we came to the
conclusion that the timer wheel code is fundamentally not suitable for
-such an approach. We initially didnt believe this ('there must be a way
+such an approach. We initially didn't believe this ('there must be a way
to solve this'), and spent a considerable effort trying to integrate
things into the timer wheel, but we failed. In hindsight, there are
several reasons why such integration is hard/impossible:
diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/atarikbd.txt
index c8f99a0a907..3feb9f2f368 100644
--- a/Documentation/input/atarikbd.txt
+++ b/Documentation/input/atarikbd.txt
@@ -30,7 +30,7 @@ is obtained by ORing 0x80 with the make code.
The special codes 0xF6 through 0xFF are reserved for use as follows:
0xF6 status report
0xF7 absolute mouse position record
- 0xF8-0xFB relative mouse position records(lsbs determind by
+ 0xF8-0xFB relative mouse position records (lsbs determined by
mouse button states)
0xFC time-of-day
0xFD joystick report (both sticks)
diff --git a/Documentation/input/cs461x.txt b/Documentation/input/cs461x.txt
index 6181747a14d..afe0d6543e0 100644
--- a/Documentation/input/cs461x.txt
+++ b/Documentation/input/cs461x.txt
@@ -27,7 +27,7 @@ This driver have the basic support for PCI devices only; there is no
ISA or PnP ISA cards supported. AFAIK the ns558 have support for Crystal
ISA and PnP ISA series.
-The driver works witn ALSA drivers simultaneously. For exmple, the xracer
+The driver works with ALSA drivers simultaneously. For example, the xracer
uses joystick as input device and PCM device as sound output in one time.
There are no sound or input collisions detected. The source code have
comments about them; but I've found the joystick can be initialized
diff --git a/Documentation/input/ff.txt b/Documentation/input/ff.txt
index c53b1c11aa4..085eb15b45b 100644
--- a/Documentation/input/ff.txt
+++ b/Documentation/input/ff.txt
@@ -38,7 +38,7 @@ joystick.txt for details.
There is an utility called fftest that will allow you to test the driver.
% fftest /dev/input/eventXX
-3. Instructions to the developper
+3. Instructions to the developer
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All interactions are done using the event API. That is, you can use ioctl()
and write() on /dev/input/eventXX.
diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt
index ac22f636e4c..a8aa848f865 100644
--- a/Documentation/input/input.txt
+++ b/Documentation/input/input.txt
@@ -154,7 +154,7 @@ about it.
3.2 Event handlers
~~~~~~~~~~~~~~~~~~
- Event handlers distrubite the events from the devices to userland and
+ Event handlers distribute the events from the devices to userland and
kernel, as needed.
3.2.1 keybdev
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index 949f7b5a205..e44855513b3 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -51,7 +51,7 @@ more complex object types. It provides a set of basic fields that
almost all complex data types share. kobjects are intended to be
embedded in larger data structures and replace fields they duplicate.
-1.2 Defintion
+1.2 Definition
struct kobject {
char name[KOBJ_NAME_LEN];
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 13aa401aed6..154b4ff9bb3 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -62,7 +62,7 @@ be reconstructed (due to no parity).
For this reason, md will normally refuse to start such an array. This
requires the sysadmin to take action to explicitly start the array
-desipite possible corruption. This is normally done with
+despite possible corruption. This is normally done with
mdadm --assemble --force ....
This option is not really available if the array has the root
@@ -214,8 +214,8 @@ All md devices contain:
safe_mode_delay
When an md array has seen no write requests for a certain period
of time, it will be marked as 'clean'. When another write
- request arrive, the array is marked as 'dirty' before the write
- commenses. This is known as 'safe_mode'.
+ request arrives, the array is marked as 'dirty' before the write
+ commences. This is known as 'safe_mode'.
The 'certain period' is controlled by this file which stores the
period as a number of seconds. The default is 200msec (0.200).
Writing a value of 0 disables safemode.
diff --git a/Documentation/networking/NAPI_HOWTO.txt b/Documentation/networking/NAPI_HOWTO.txt
index 54376e8249c..93af3e87c65 100644
--- a/Documentation/networking/NAPI_HOWTO.txt
+++ b/Documentation/networking/NAPI_HOWTO.txt
@@ -35,7 +35,7 @@ Legend:
packets out of the rx ring. Note from this that the lower the
load the more we could clean up the rxring
"Ndone" == is the converse of "Done". Note again, that the higher
-the load the more times we couldnt clean up the rxring.
+the load the more times we couldn't clean up the rxring.
Observe that:
when the NIC receives 890Kpackets/sec only 17 rx interrupts are generated.
diff --git a/Documentation/networking/gen_stats.txt b/Documentation/networking/gen_stats.txt
index c3297f79c13..ae54c828f4d 100644
--- a/Documentation/networking/gen_stats.txt
+++ b/Documentation/networking/gen_stats.txt
@@ -103,8 +103,8 @@ In the kernel when setting up:
else
failed
-From now on, everytime you dump my_rate_est_stats it will contain
-uptodate info.
+From now on, every time you dump my_rate_est_stats it will contain
+up-to-date info.
Once you are done, call gen_kill_estimator(my_basicstats,
my_rate_est_stats) Make sure that my_basicstats and my_rate_est_stats
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index c2f859f7f2f..287b6227f1e 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -147,7 +147,7 @@ Examples:
Example scripts
===============
-A collection of small tutorial scripts for pktgen is in expamples dir.
+A collection of small tutorial scripts for pktgen is in examples dir.
pktgen.conf-1-1 # 1 CPU 1 dev
pktgen.conf-1-2 # 1 CPU 2 dev
diff --git a/Documentation/networking/wan-router.txt b/Documentation/networking/wan-router.txt
index c96897aa08b..3e549fc90f9 100644
--- a/Documentation/networking/wan-router.txt
+++ b/Documentation/networking/wan-router.txt
@@ -570,7 +570,7 @@ bata1-2.2.1 Feb 09 2001
Option to COMPILE WANPIPE modules against the currently
running kernel, thus no need for manual kernel and module
- re-compilatin.
+ re-compilation.
o Updates and Bug Fixes to wancfg utility.
diff --git a/Documentation/nfsroot.txt b/Documentation/nfsroot.txt
index 3cc953cb288..719f9a9d60c 100644
--- a/Documentation/nfsroot.txt
+++ b/Documentation/nfsroot.txt
@@ -11,7 +11,7 @@ Updated 2006 by Horms <horms@verge.net.au>
In order to use a diskless system, such as an X-terminal or printer server
for example, it is necessary for the root filesystem to be present on a
non-disk device. This may be an initramfs (see Documentation/filesystems/
-ramfs-rootfs-initramfs.txt), a ramdisk (see Documenation/initrd.txt) or a
+ramfs-rootfs-initramfs.txt), a ramdisk (see Documentation/initrd.txt) or a
filesystem mounted via NFS. The following text describes on how to use NFS
for the root filesystem. For the rest of this text 'client' means the
diskless system, and 'server' means the NFS server.
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt
index 73fc87e5dc3..24edf25b3bb 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.txt
@@ -326,7 +326,7 @@ A reference implementation
This is a typical implementation. Drivers can slightly change the order
of the operations in the implementation, ignore some operations or add
-more deriver specific operations in it, but drivers should do something like
+more driver specific operations in it, but drivers should do something like
this on the whole.
5. Resources
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index e80e03637a6..bfcd95dd3c3 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -335,7 +335,7 @@ struct boot_param_header {
"compact" format for the tree itself that is however not backward
compatible. You should always generate a structure of the highest
version defined at the time of your implementation. Currently
- that is version 16, unless you explicitely aim at being backward
+ that is version 16, unless you explicitly aim at being backward
compatible.
- last_comp_version
diff --git a/Documentation/rocket.txt b/Documentation/rocket.txt
index a1067800445..2d11ad6e525 100644
--- a/Documentation/rocket.txt
+++ b/Documentation/rocket.txt
@@ -107,7 +107,7 @@ second, third, and fourth Rocketport cards (if present) are set via
software control. The DIP switch settings for the I/O address must be
set to the value of the first Rocketport cards.
-In order to destinguish each of the card from the others, each card
+In order to distinguish each of the card from the others, each card
must have a unique board ID set on the dip switches. The first
Rocketport board must be set with the DIP switches corresponding to
the first board, the second board must be set with the DIP switches
@@ -120,7 +120,7 @@ conflict with any other cards in the system, including other
RocketPort cards. Below, you will find a list of commonly used I/O
address ranges which may be in use by other devices in your system.
On a Linux system, "cat /proc/ioports" will also be helpful in
-identifying what I/O addresses are being used by devics on your
+identifying what I/O addresses are being used by devices on your
system.
Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index a6555dbfa08..ffb74a1656e 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -8,8 +8,8 @@
Overview of Document:
=====================
This document is intended to give an good overview of how to debug
-Linux for s/390 & z/Architecture it isn't intended as a complete reference & not a
-tutorial on the fundamentals of C & assembly, it dosen't go into
+Linux for s/390 & z/Architecture. It isn't intended as a complete reference & not a
+tutorial on the fundamentals of C & assembly. It doesn't go into
390 IO in any detail. It is intended to complement the documents in the
reference section below & any other worthwhile references you get.
@@ -354,7 +354,7 @@ static inline struct task_struct * get_current(void)
}
i.e. just anding the current kernel stack pointer with the mask -8192.
-Thankfully because Linux dosen't have support for nested IO interrupts
+Thankfully because Linux doesn't have support for nested IO interrupts
& our devices have large buffers can survive interrupts being shut for
short amounts of time we don't need a separate stack for interrupts.
@@ -394,7 +394,7 @@ i.e they aren't in registers & they aren't static.
back-chain:
This is a pointer to the stack pointer before entering a
framed functions ( see frameless function ) prologue got by
-deferencing the address of the current stack pointer,
+dereferencing the address of the current stack pointer,
i.e. got by accessing the 32 bit value at the stack pointers
current location.
@@ -724,7 +724,7 @@ This is useful for debugging because
1) You can double check whether the files you expect to be included are the ones
that are being included ( e.g. double check that you aren't going to the i386 asm directory ).
2) Check that macro definitions aren't clashing with typedefs,
-3) Check that definitons aren't being used before they are being included.
+3) Check that definitions aren't being used before they are being included.
4) Helps put the line emitting the error under the microscope if it contains macros.
For convenience the Linux kernel's makefile will do preprocessing automatically for you
@@ -840,12 +840,11 @@ using the strip command to make it a more reasonable size to boot it.
A source/assembly mixed dump of the kernel can be done with the line
objdump --source vmlinux > vmlinux.lst
-Also if the file isn't compiled -g this will output as much debugging information
-as it can ( e.g. function names ), however, this is very slow as it spends lots
-of time searching for debugging info, the following self explanitory line should be used
-instead if the code isn't compiled -g.
+Also, if the file isn't compiled -g, this will output as much debugging information
+as it can (e.g. function names). This is very slow as it spends lots
+of time searching for debugging info. The following self explanatory line should be used
+instead if the code isn't compiled -g, as it is much faster:
objdump --disassemble-all --syms vmlinux > vmlinux.lst
-as it is much faster
As hard drive space is valuble most of us use the following approach.
1) Look at the emitted psw on the console to find the crash address in the kernel.
@@ -1674,8 +1673,8 @@ channel is idle & the second for device end ( secondary status ) sometimes you g
concurrently, you check how the IO went on by issuing a TEST SUBCHANNEL at each interrupt,
from which you receive an Interruption response block (IRB). If you get channel & device end
status in the IRB without channel checks etc. your IO probably went okay. If you didn't you
-probably need a doctorto examine the IRB & extended status word etc.
-If an error occurs more sophistocated control units have a facitity known as
+probably need a doctor to examine the IRB & extended status word etc.
+If an error occurs, more sophistocated control units have a facitity known as
concurrent sense this means that if an error occurs Extended sense information will
be presented in the Extended status word in the IRB if not you have to issue a
subsequent SENSE CCW command after the test subchannel.
@@ -1916,7 +1915,7 @@ Assembly
--------
info registers: displays registers other than floating point.
info all-registers: displays floating points as well.
-disassemble: dissassembles
+disassemble: disassembles
e.g.
disassemble without parameters will disassemble the current function
disassemble $pc $pc+10
@@ -1935,7 +1934,7 @@ undisplay : undo's display's
info breakpoints: shows all current breakpoints
-info stack: shows stack back trace ( if this dosent work too well, I'll show you the
+info stack: shows stack back trace ( if this doesn't work too well, I'll show you the
stacktrace by hand below ).
info locals: displays local variables.
diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt
index 079d8868ae8..3746b6d7b4b 100644
--- a/Documentation/s390/cds.txt
+++ b/Documentation/s390/cds.txt
@@ -433,7 +433,7 @@ puts the CPU into I/O disabled state by preserving the current PSW flags.
The device driver is allowed to issue the next ccw_device_start() call from
within its interrupt handler already. It is not required to schedule a
-bottom-half, unless an non deterministicly long running error recovery procedure
+bottom-half, unless an non deterministically long running error recovery procedure
or similar needs to be scheduled. During I/O processing the Linux/390 generic
I/O device driver support has already obtained the IRQ lock, i.e. the handler
must not try to obtain it again when calling ccw_device_start() or we end in a
diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt
index e321a8ed2a2..5ff6fe551b9 100644
--- a/Documentation/s390/s390dbf.txt
+++ b/Documentation/s390/s390dbf.txt
@@ -468,7 +468,7 @@ The hex_ascii view shows the data field in hex and ascii representation
The raw view returns a bytestream as the debug areas are stored in memory.
The sprintf view formats the debug entries in the same way as the sprintf
-function would do. The sprintf event/expection functions write to the
+function would do. The sprintf event/exception functions write to the
debug entry a pointer to the format string (size = sizeof(long))
and for each vararg a long value. So e.g. for a debug entry with a format
string plus two varargs one would need to allocate a (3 * sizeof(long))
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index fb9281ae8fa..e80a02cffb2 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -96,10 +96,10 @@ The original driver has been written for 386bsd and FreeBSD by:
It is now available as a bundle of 2 drivers:
- ncr53c8xx generic driver that supports all the SYM53C8XX family including
- the ealiest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and
+ the earliest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and
the new 895A (1 channel LVD SCSI controller).
- sym53c8xx enhanced driver (a.k.a. 896 drivers) that drops support of oldest
- chips in order to gain advantage of new features, as LOAD/STORE intructions
+ chips in order to gain advantage of new features, as LOAD/STORE instructions
available since the 810A and hardware phase mismatch available with the
896 and the 895A.
@@ -207,7 +207,7 @@ The 896 and the 895A allows handling of the phase mismatch context from
SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor
until the C code has saved the context of the transfer).
Implementing this without using LOAD/STORE instructions would be painfull
-and I did'nt even want to try it.
+and I didn't even want to try it.
The 896 chip supports 64 bit PCI transactions and addressing, while the
895A supports 32 bit PCI transactions and 64 bit addressing.
diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt
index ce767b90bb0..8d6253f9cb3 100644
--- a/Documentation/scsi/scsi_eh.txt
+++ b/Documentation/scsi/scsi_eh.txt
@@ -160,7 +160,7 @@ ways.
- Fine-grained EH callbacks
LLDD can implement fine-grained EH callbacks and let SCSI
midlayer drive error handling and call appropriate callbacks.
- This will be dicussed further in [2-1].
+ This will be discussed further in [2-1].
- eh_strategy_handler() callback
This is one big callback which should perform whole error
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index 2bf3cfa3a06..8b2168aa4fc 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -381,7 +381,7 @@ Please see http://www.garloff.de/kurt/linux/dc390/problems.html
replaced by the dev index of your scanner). You may try to reset your SCSI
bus afterwards (echo "RESET" >/proc/scsi/tmscsim/?).
The problem seems to be solved as of 2.0d18, thanks to Andreas Rick.
-* If there is a valid partition table, the driver will use it for determing
+* If there is a valid partition table, the driver will use it for determining
the mapping. If there's none, a reasonable mapping (Symbios-like) will be
assumed. Other operating systems may not like this mapping, though
it's consistent with the BIOS' behaviour. Old DC390 drivers ignored the
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 958ccf3aa2e..4fbf8d5d4e7 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1263,8 +1263,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Note: on some notebooks the buffer address cannot be detected
automatically, or causes hang-up during initialization.
- In such a case, specify the buffer top address explicity via
- buffer_top option.
+ In such a case, specify the buffer top address explicitly via
+ the buffer_top option.
For example,
Sony F250: buffer_top=0x25a800
Sony F270: buffer_top=0x272800
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index b535c2a198f..e40cce83327 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -126,7 +126,7 @@ Here is a list of supported device_setup values for this device:
- Alsa driver default mode
- maintains backward compatibility with setups that do not use this
parameter by not introducing any change
- - results sometimes in corrupted sound as decribed earlier
+ - results sometimes in corrupted sound as described earlier
* device_setup=0x01
- 16bits 48kHz mode with Di disabled
- Ai,Ao,Do can be used at the same time
diff --git a/Documentation/sound/alsa/MIXART.txt b/Documentation/sound/alsa/MIXART.txt
index 0db6ca7db28..9fa5bbdbac8 100644
--- a/Documentation/sound/alsa/MIXART.txt
+++ b/Documentation/sound/alsa/MIXART.txt
@@ -97,4 +97,4 @@ COPYRIGHT
=========
Copyright (c) 2003 Digigram SA <alsa@digigram.com>
-Distributalbe under GPL.
+Distributable under GPL.
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 1fe48846d78..b1386168f6a 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -71,7 +71,7 @@ The status of MIDI I/O is found in midi* files. It shows the device
name and the received/transmitted bytes through the MIDI device.
When the card is equipped with AC97 codecs, there are codec97#*
-subdirectories (desribed later).
+subdirectories (described later).
When the OSS mixer emulation is enabled (and the module is loaded),
oss_mixer file appears here, too. This shows the current mapping of
diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index 39c68f8c4e6..67114419309 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -126,7 +126,7 @@ one or more packets could finish before an error stops further endpoint I/O.
urb->transfer_flags.
-ENODEV Device was removed. Often preceded by a burst of
- other errors, since the hub driver does't detect
+ other errors, since the hub driver doesn't detect
device removal events immediately.
-EXDEV ISO transfer only partially completed
diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
index cd806bfc8b8..433208871fb 100644
--- a/Documentation/usb/mtouchusb.txt
+++ b/Documentation/usb/mtouchusb.txt
@@ -63,7 +63,7 @@ TODO:
Implement a control urb again to handle requests to and from the device
such as calibration, etc once/if it becomes available.
-DISCLAMER:
+DISCLAIMER:
I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support
this driver! If you want touch drivers only supported within X, please go to:
diff --git a/Documentation/video4linux/meye.txt b/Documentation/video4linux/meye.txt
index 2137da97552..ecb34160e61 100644
--- a/Documentation/video4linux/meye.txt
+++ b/Documentation/video4linux/meye.txt
@@ -29,7 +29,7 @@ driver (PCI vendor/device is 0x136b/0xff01)
The third one, present in recent (more or less last year) Picturebooks
(C1M* models), is not supported. The manufacturer has given the specs
-to the developers under a NDA (which allows the develoment of a GPL
+to the developers under a NDA (which allows the development of a GPL
driver however), but things are not moving very fast (see
http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011).
diff --git a/Documentation/video4linux/zr36120.txt b/Documentation/video4linux/zr36120.txt
index ac6d92d0194..1a1c2d03a5c 100644
--- a/Documentation/video4linux/zr36120.txt
+++ b/Documentation/video4linux/zr36120.txt
@@ -118,9 +118,9 @@ card is not there, please try if any other card gives some
response, and mail me if you got a working tvcard addition.
PS. <TVCard editors behold!)
- Dont forget to set video_input to the number of inputs
+ Don't forget to set video_input to the number of inputs
you defined in the video_mux part of the tvcard definition.
- Its a common error to add a channel but not incrementing
+ It's a common error to add a channel but not incrementing
video_input and getting angry with me/v4l/linux/linus :(
You are now ready to test the framegrabber with your favorite