diff options
Diffstat (limited to 'arch/arm/mach-davinci/devices.c')
| -rw-r--r-- | arch/arm/mach-davinci/devices.c | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index a31370b93dd..c85091c25d1 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -23,8 +23,14 @@ #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/mux.h> +#include <mach/edma.h> +#include <mach/mmc.h> +#include <mach/time.h> #define DAVINCI_I2C_BASE 0x01C21000 +#define DAVINCI_MMCSD0_BASE 0x01E10000 +#define DM355_MMCSD0_BASE 0x01E11000 +#define DM355_MMCSD1_BASE 0x01E00000 static struct resource i2c_resources[] = { { @@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) (void) platform_device_register(&davinci_i2c_device); } +#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) + +static u64 mmcsd0_dma_mask = DMA_32BIT_MASK; + +static struct resource mmcsd0_resources[] = { + { + /* different on dm355 */ + .start = DAVINCI_MMCSD0_BASE, + .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_MMCINT, + .flags = IORESOURCE_IRQ, + }, { + /* different on dm355 */ + .start = IRQ_SDIOINT, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = DAVINCI_DMA_MMCRXEVT, + .flags = IORESOURCE_DMA, + }, { + .start = DAVINCI_DMA_MMCTXEVT, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd0_device = { + .name = "davinci_mmc", + .id = 0, + .dev = { + .dma_mask = &mmcsd0_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(mmcsd0_resources), + .resource = mmcsd0_resources, +}; + +static u64 mmcsd1_dma_mask = DMA_32BIT_MASK; + +static struct resource mmcsd1_resources[] = { + { + .start = DM355_MMCSD1_BASE, + .end = DM355_MMCSD1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_DM355_MMCINT1, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_DM355_SDIOINT1, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = 30, /* rx */ + .flags = IORESOURCE_DMA, + }, { + .start = 31, /* tx */ + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd1_device = { + .name = "davinci_mmc", + .id = 1, + .dev = { + .dma_mask = &mmcsd1_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(mmcsd1_resources), + .resource = mmcsd1_resources, +}; + + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ + struct platform_device *pdev = NULL; + + if (WARN_ON(cpu_is_davinci_dm646x())) + return; + + /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too; + * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused. + * + * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are + * not handled right here ... + */ + switch (module) { + case 1: + if (!cpu_is_davinci_dm355()) + break; + + /* REVISIT we may not need all these pins if e.g. this + * is a hard-wired SDIO device... + */ + davinci_cfg_reg(DM355_SD1_CMD); + davinci_cfg_reg(DM355_SD1_CLK); + davinci_cfg_reg(DM355_SD1_DATA0); + davinci_cfg_reg(DM355_SD1_DATA1); + davinci_cfg_reg(DM355_SD1_DATA2); + davinci_cfg_reg(DM355_SD1_DATA3); + + pdev = &davinci_mmcsd1_device; + break; + case 0: + if (cpu_is_davinci_dm355()) { + mmcsd0_resources[0].start = DM355_MMCSD0_BASE; + mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0; + + /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */ + davinci_cfg_reg(DM355_MMCSD0); + + /* enable RX EDMA */ + davinci_cfg_reg(DM355_EVT26_MMC0_RX); + } + + else if (cpu_is_davinci_dm644x()) { + /* REVISIT: should this be in board-init code? */ + void __iomem *base = + IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + + /* Power-on 3.3V IO cells */ + __raw_writel(0, base + DM64XX_VDD3P3V_PWDN); + /*Set up the pull regiter for MMC */ + davinci_cfg_reg(DM644X_MSTK); + } + + pdev = &davinci_mmcsd0_device; + break; + } + + if (WARN_ON(!pdev)) + return; + + pdev->dev.platform_data = config; + platform_device_register(pdev); +} + +#else + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ +} + +#endif + +/*-------------------------------------------------------------------------*/ + +static struct resource wdt_resources[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device davinci_wdt_device = { + .name = "watchdog", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void davinci_init_wdt(void) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + wdt_resources[0].start = (resource_size_t)soc_info->wdt_base; + wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1; + + platform_device_register(&davinci_wdt_device); +} + +/*-------------------------------------------------------------------------*/ + +struct davinci_timer_instance davinci_timer_instance[2] = { + { + .base = IO_ADDRESS(DAVINCI_TIMER0_BASE), + .bottom_irq = IRQ_TINT0_TINT12, + .top_irq = IRQ_TINT0_TINT34, + }, + { + .base = IO_ADDRESS(DAVINCI_TIMER1_BASE), + .bottom_irq = IRQ_TINT1_TINT12, + .top_irq = IRQ_TINT1_TINT34, + }, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init davinci_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + davinci_init_wdt(); + + return 0; +} +arch_initcall(davinci_init_devices); + |