aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci/serial.c')
-rw-r--r--arch/arm/mach-davinci/serial.c74
1 files changed, 10 insertions, 64 deletions
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 69507579652..c530c7333d0 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -33,6 +33,8 @@
#include <mach/serial.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
+#include <mach/common.h>
+
#include "clock.h"
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
@@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = DAVINCI_UART0_BASE,
- .irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .mapbase = DAVINCI_UART1_BASE,
- .irq = IRQ_UARTINT1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .mapbase = DAVINCI_UART2_BASE,
- .irq = IRQ_UARTINT2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0
- },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
unsigned int pwremu = 0;
@@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
UART_DM646X_SCR_TX_WATERMARK);
}
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
{
int i;
char name[16];
struct clk *uart_clk;
- struct device *dev = &serial_device.dev;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct device *dev = &soc_info->serial_dev->dev;
+ struct plat_serial8250_port *p = dev->platform_data;
/*
* Make sure the serial ports are muxed on at this point.
- * You have to mux them off in device drivers later on
- * if not needed.
+ * You have to mux them off in device drivers later on if not needed.
*/
- for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
- struct plat_serial8250_port *p = serial_platform_data + i;
-
- if (!(info->enabled_uarts & (1 << i))) {
- p->flags = 0;
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+ if (!(info->enabled_uarts & (1 << i)))
continue;
- }
-
- if (cpu_is_davinci_dm646x())
- p->iotype = UPIO_MEM32;
-
- if (cpu_is_davinci_dm355()) {
- if (i == 2) {
- p->mapbase = (unsigned long)DM355_UART2_BASE;
- p->irq = IRQ_DM355_UARTINT2;
- }
- }
sprintf(name, "uart%d", i);
uart_clk = clk_get(dev, name);
@@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info)
davinci_serial_reset(p);
}
}
-}
-static int __init davinci_init(void)
-{
- return platform_device_register(&serial_device);
+ return platform_device_register(soc_info->serial_dev);
}
-
-arch_initcall(davinci_init);