aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-ixp4xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ixp4xx')
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig16
-rw-r--r--arch/arm/mach-ixp4xx/Makefile4
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-pci.c63
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-setup.c108
-rw-r--r--arch/arm/mach-ixp4xx/gtwx5715-pci.c8
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c96
-rw-r--r--arch/arm/mach-ixp4xx/wg302v2-pci.c63
-rw-r--r--arch/arm/mach-ixp4xx/wg302v2-setup.c109
8 files changed, 461 insertions, 6 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 060909870b5..61b2dfcb89d 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -41,6 +41,22 @@ config ARCH_ADI_COYOTE
Engineering Coyote Gateway Reference Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
+config MACH_GATEWAY7001
+ bool "Gateway 7001"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Gateway's
+ 7001 Access Point. For more information on this platform,
+ see http://openwrt.org
+
+config MACH_WG302V2
+ bool "Netgear WG302 v2 / WAG302 v2"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Netgear's
+ WG302 v2 or WAG302 v2 Access Points. For more information
+ on this platform, see http://openwrt.org
+
config ARCH_IXDP425
bool "IXDP425"
help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 3b87c47e06c..77e00ade558 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -13,6 +13,8 @@ obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
+obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
obj-y += common.o
@@ -24,5 +26,7 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
new file mode 100644
index 00000000000..6abf568322d
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -0,0 +1,63 @@
+/*
+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
+ *
+ * PCI setup routines for Gateway 7001
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ * Copyright (C) 2002 Jungo Software Technologies.
+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/pci.h>
+
+void __init gateway7001_pci_preinit(void)
+{
+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot == 1)
+ return IRQ_IXP4XX_GPIO11;
+ else if (slot == 2)
+ return IRQ_IXP4XX_GPIO10;
+ else return -1;
+}
+
+struct hw_pci gateway7001_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = gateway7001_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = gateway7001_map_irq,
+};
+
+int __init gateway7001_pci_init(void)
+{
+ if (machine_is_gateway7001())
+ pci_common_init(&gateway7001_pci);
+ return 0;
+}
+
+subsys_initcall(gateway7001_pci_init);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
new file mode 100644
index 00000000000..37876832e14
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-ixp4xx/gateway7001-setup.c
+ *
+ * Board setup for the Gateway 7001 board
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data gateway7001_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource gateway7001_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device gateway7001_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &gateway7001_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &gateway7001_flash_resource,
+};
+
+static struct resource gateway7001_uart_resource = {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port gateway7001_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device gateway7001_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = gateway7001_uart_data,
+ },
+ .num_resources = 1,
+ .resource = &gateway7001_uart_resource,
+};
+
+static struct platform_device *gateway7001_devices[] __initdata = {
+ &gateway7001_flash,
+ &gateway7001_uart
+};
+
+static void __init gateway7001_init(void)
+{
+ ixp4xx_sys_init();
+
+ gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
+}
+
+#ifdef CONFIG_MACH_GATEWAY7001
+MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = gateway7001_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index a66484b63d3..0d5a4245582 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -25,17 +25,13 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/irq.h>
+
#include <asm/mach-types.h>
#include <asm/hardware.h>
-#include <asm/irq.h>
#include <asm/arch/gtwx5715.h>
#include <asm/mach/pci.h>
-extern void ixp4xx_pci_preinit(void);
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
-
/*
* The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
* Slot 0 isn't actually populated with a card connector but
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index ec4f07950ec..d5008d8fc9a 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -15,6 +15,10 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -24,6 +28,7 @@
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <asm/delay.h>
static struct flash_platform_data ixdp425_flash_data = {
.map_name = "cfi_probe",
@@ -44,6 +49,77 @@ static struct platform_device ixdp425_flash = {
.resource = &ixdp425_flash_resource,
};
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition ixdp425_partitions[] = {
+ {
+ .name = "ixp400 NAND FS 0",
+ .offset = 0,
+ .size = SZ_8M
+ }, {
+ .name = "ixp400 NAND FS 1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+#endif
+
+static void
+ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ int offset = (int)this->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_NCE) {
+ gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW);
+ udelay(5);
+ } else
+ gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH);
+
+ offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
+ offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
+ this->priv = (void *)offset;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W + offset);
+}
+
+static struct platform_nand_data ixdp425_flash_nand_data = {
+ .chip = {
+ .chip_delay = 30,
+ .options = NAND_NO_AUTOINCR,
+#ifdef CONFIG_MTD_PARTITIONS
+ .part_probe_types = part_probes,
+ .partitions = ixdp425_partitions,
+ .nr_partitions = ARRAY_SIZE(ixdp425_partitions),
+#endif
+ },
+ .ctrl = {
+ .cmd_ctrl = ixdp425_flash_nand_cmd_ctrl
+ }
+};
+
+static struct resource ixdp425_flash_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ixdp425_flash_nand = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &ixdp425_flash_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &ixdp425_flash_nand_resource,
+};
+#endif /* CONFIG_MTD_NAND_PLATFORM */
+
static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
.sda_pin = IXDP425_SDA_PIN,
.scl_pin = IXDP425_SCL_PIN,
@@ -104,6 +180,10 @@ static struct platform_device ixdp425_uart = {
static struct platform_device *ixdp425_devices[] __initdata = {
&ixdp425_i2c_controller,
&ixdp425_flash,
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+ &ixdp425_flash_nand,
+#endif
&ixdp425_uart
};
@@ -115,6 +195,22 @@ static void __init ixdp425_init(void)
ixdp425_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+ ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
+ ixdp425_flash_nand_resource.end = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
+
+ gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT);
+
+ /* Configure expansion bus for NAND Flash */
+ *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
+ IXP4XX_EXP_BUS_STROBE_T(1) | /* extend by 1 clock */
+ IXP4XX_EXP_BUS_CYCLES(0) | /* Intel cycles */
+ IXP4XX_EXP_BUS_SIZE(0) | /* 512bytes addr space*/
+ IXP4XX_EXP_BUS_WR_EN |
+ IXP4XX_EXP_BUS_BYTE_EN; /* 8 bit data bus */
+#endif
+
if (cpu_is_ixp43x()) {
ixdp425_uart.num_resources = 1;
ixdp425_uart_data[1].flags = 0;
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
new file mode 100644
index 00000000000..6588f2c758e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -0,0 +1,63 @@
+/*
+ * arch/arch/mach-ixp4xx/wg302v2-pci.c
+ *
+ * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ * Copyright (C) 2002 Jungo Software Technologies.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/pci.h>
+
+void __init wg302v2_pci_preinit(void)
+{
+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot == 1)
+ return IRQ_IXP4XX_GPIO8;
+ else if (slot == 2)
+ return IRQ_IXP4XX_GPIO9;
+ else return -1;
+}
+
+struct hw_pci wg302v2_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = wg302v2_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = wg302v2_map_irq,
+};
+
+int __init wg302v2_pci_init(void)
+{
+ if (machine_is_wg302v2())
+ pci_common_init(&wg302v2_pci);
+ return 0;
+}
+
+subsys_initcall(wg302v2_pci_init);
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
new file mode 100644
index 00000000000..f7e09ad804e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-ixp4xx/wg302-setup.c
+ *
+ * Board setup for the Netgear WG302 v2 and WAG302 v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <kaloz@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data wg302v2_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource wg302v2_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device wg302v2_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &wg302v2_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &wg302v2_flash_resource,
+};
+
+static struct resource wg302v2_uart_resource = {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port wg302v2_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device wg302v2_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = wg302v2_uart_data,
+ },
+ .num_resources = 1,
+ .resource = &wg302v2_uart_resource,
+};
+
+static struct platform_device *wg302v2_devices[] __initdata = {
+ &wg302v2_flash,
+ &wg302v2_uart,
+};
+
+static void __init wg302v2_init(void)
+{
+ ixp4xx_sys_init();
+
+ wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
+}
+
+#ifdef CONFIG_MACH_WG302V2
+MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = wg302v2_init,
+MACHINE_END
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-13 21:18:35 +0000