aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/clock.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/clock.h')
-rw-r--r--arch/arm/mach-omap2/clock.h2103
1 files changed, 2103 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
new file mode 100644
index 00000000000..4aeab5591bd
--- /dev/null
+++ b/arch/arm/mach-omap2/clock.h
@@ -0,0 +1,2103 @@
+/*
+ * linux/arch/arm/mach-omap24xx/clock.h
+ *
+ * Copyright (C) 2005 Texas Instruments Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Created for OMAP2.
+ *
+ * Copyright (C) 2004 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
+
+static void omap2_sys_clk_recalc(struct clk * clk);
+static void omap2_clksel_recalc(struct clk * clk);
+static void omap2_followparent_recalc(struct clk * clk);
+static void omap2_propagate_rate(struct clk * clk);
+static void omap2_mpu_recalc(struct clk * clk);
+static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
+static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
+static void omap2_clk_unuse(struct clk *clk);
+static void omap2_sys_clk_recalc(struct clk * clk);
+static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val);
+static u32 omap2_clksel_get_divisor(struct clk *clk);
+
+
+#define RATE_IN_242X (1 << 0)
+#define RATE_IN_243X (1 << 1)
+
+/* Memory timings */
+#define M_DDR 1
+#define M_LOCK_CTRL (1 << 2)
+#define M_UNLOCK 0
+#define M_LOCK 1
+
+struct memory_timings {
+ u32 m_type; /* ddr = 1, sdr = 0 */
+ u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
+ u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
+ u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
+ u32 base_cs; /* base chip select to use for calculations */
+};
+
+/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ */
+struct prcm_config {
+ unsigned long xtal_speed; /* crystal rate */
+ unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
+ unsigned long mpu_speed; /* speed of MPU */
+ unsigned long cm_clksel_mpu; /* mpu divider */
+ unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
+ unsigned long cm_clksel_gfx; /* gfx dividers */
+ unsigned long cm_clksel1_core; /* major subsystem dividers */
+ unsigned long cm_clksel1_pll; /* m,n */
+ unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
+ unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
+ unsigned long base_sdrc_rfr; /* base refresh timing for a set */
+ unsigned char flags;
+};
+
+/* Mask for clksel which support parent settign in set_rate */
+#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
+ CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
+
+/* Mask for clksel regs which support rate operations */
+#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
+ CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
+ CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
+ CM_SYSCLKOUT_SEL1)
+
+/*
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ */
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1 (0x10 << 8)
+#define RX_CLKSEL_DSS2 (0x0 << 13)
+#define RX_CLKSEL_SSI (0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3 (4 << 0)
+#define R1_CLKSEL_L4 (2 << 5)
+#define R1_CLKSEL_USB (4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+ RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+ R1_CLKSEL_L4 | R1_CLKSEL_L3
+#define R1_CLKSEL_MPU (2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP (2 << 0)
+#define R1_CLKSEL_DSP_IF (2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
+#define R1_CLKSEL_GFX (2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM (4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3 (6 << 0)
+#define R2_CLKSEL_L4 (2 << 5)
+#define R2_CLKSEL_USB (2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+ RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+ R2_CLKSEL_L4 | R2_CLKSEL_L3
+#define R2_CLKSEL_MPU (2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP (2 << 0)
+#define R2_CLKSEL_DSP_IF (3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
+#define R2_CLKSEL_GFX (2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM (6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3 (1 << 0)
+#define RB_CLKSEL_L4 (1 << 5)
+#define RB_CLKSEL_USB (1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+ RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+ RB_CLKSEL_L4 | RB_CLKSEL_L3
+#define RB_CLKSEL_MPU (1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP (1 << 0)
+#define RB_CLKSEL_DSP_IF (1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
+#define RB_CLKSEL_GFX (1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM (1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ (0x12 << 15)
+#define RXX_CLKSEL_SSI (0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
+#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
+#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+ RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+ RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+ RIII_CLKSEL_L3
+#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
+#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
+#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+ RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+ RIII_CLKSEL_DSP
+#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
+#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
+#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \
+ RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+ RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+ RII_CLKSEL_L4 | RII_CLKSEL_L3
+#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
+#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
+#define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */
+#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \
+ RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+ RII_CLKSEL_DSP
+#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3 (1 << 0)
+#define RVII_CLKSEL_L4 (1 << 5)
+#define RVII_CLKSEL_DSS1 (1 << 8)
+#define RVII_CLKSEL_DSS2 (0 << 13)
+#define RVII_CLKSEL_VLYNQ (1 << 15)
+#define RVII_CLKSEL_SSI (1 << 20)
+#define RVII_CLKSEL_USB (1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+ RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
+ RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
+
+#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP (1 << 0)
+#define RVII_CLKSEL_DSP_IF (1 << 5)
+#define RVII_SYNC_DSP (0 << 7)
+#define RVII_CLKSEL_IVA (1 << 8)
+#define RVII_SYNC_IVA (0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
+ RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
+
+#define RVII_CLKSEL_GFX (1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC (0 << 3)
+#define MX_54M_SRC (0 << 5)
+#define MX_APLLS_CLIKIN_12 (3 << 23)
+#define MX_APLLS_CLIKIN_13 (2 << 23)
+#define MX_APLLS_CLIKIN_19_2 (0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #2 (ratio1) baseport-target
+ * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12 (133 << 12)
+#define M5A_DPLL_DIV_12 (5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
+ M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12
+#define M5A_DPLL_MULT_13 (266 << 12)
+#define M5A_DPLL_DIV_13 (12 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
+ M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13
+#define M5A_DPLL_MULT_19 (180 << 12)
+#define M5A_DPLL_DIV_19 (12 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
+ M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+ MX_APLLS_CLIKIN_19_2
+/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12 (50 << 12)
+#define M5B_DPLL_DIV_12 (2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
+ M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12
+#define M5B_DPLL_MULT_13 (200 << 12)
+#define M5B_DPLL_DIV_13 (12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
+ M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13
+#define M5B_DPLL_MULT_19 (125 << 12)
+#define M5B_DPLL_DIV_19 (31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
+ M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+ MX_APLLS_CLIKIN_19_2
+/*
+ * #4 (ratio2)
+ * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12 (55 << 12)
+#define M3_DPLL_DIV_12 (1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
+ M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12
+#define M3_DPLL_MULT_13 (330 << 12)
+#define M3_DPLL_DIV_13 (12 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
+ M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13
+#define M3_DPLL_MULT_19 (275 << 12)
+#define M3_DPLL_DIV_19 (15 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
+ M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+ MX_APLLS_CLIKIN_19_2
+/* boot (boot) */
+#define MB_DPLL_MULT (1 << 12)
+#define MB_DPLL_DIV (0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+ MB_DPLL_MULT | MX_APLLS_CLIKIN_12
+
+#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+ MB_DPLL_MULT | MX_APLLS_CLIKIN_13
+
+#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+ MB_DPLL_MULT | MX_APLLS_CLIKIN_19
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12 (50 << 12)
+#define MII_DPLL_DIV_12 (1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
+ MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12
+#define MII_DPLL_MULT_13 (300 << 12)
+#define MII_DPLL_DIV_13 (12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
+ MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12 (133 << 12)
+#define MIII_DPLL_DIV_12 (5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
+ MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
+ MX_APLLS_CLIKIN_12
+#define MIII_DPLL_MULT_13 (266 << 12)
+#define MIII_DPLL_DIV_13 (12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
+ MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
+ MX_APLLS_CLIKIN_13
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
+
+/*
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the oppisite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
+#define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
+#define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
+#define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
+
+/* MPU speed defines */
+#define S12M 12000000
+#define S13M 13000000
+#define S19M 19200000
+#define S26M 26000000
+#define S100M 100000000
+#define S133M 133000000
+#define S150M 150000000
+#define S165M 165000000
+#define S200M 200000000
+#define S266M 266000000
+#define S300M 300000000
+#define S330M 330000000
+#define S400M 400000000
+#define S532M 532000000
+#define S600M 600000000
+#define S660M 660000000
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defiend the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used. Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set. The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+static struct prcm_config rate_table[] = {
+ /* PRCM II - FAST */
+ {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
+ RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+ RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+ RATE_IN_242X},
+
+ {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
+ RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+ RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+ RATE_IN_242X},
+
+ /* PRCM III - FAST */
+ {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
+ RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+ RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+ RATE_IN_242X},
+
+ {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
+ RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+ RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+ RATE_IN_242X},
+
+ /* PRCM II - SLOW */
+ {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
+ RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+ RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+ RATE_IN_242X},
+
+ {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
+ RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+ RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
+ RATE_IN_242X},
+
+ /* PRCM III - SLOW */
+ {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
+ RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+ RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+ RATE_IN_242X},
+
+ {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
+ RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+ RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
+ RATE_IN_242X},
+
+ /* PRCM-VII (boot-bypass) */
+ {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
+ RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+ RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_242X},
+
+ /* PRCM-VII (boot-bypass) */
+ {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
+ RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+ RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_242X},
+
+ /* PRCM #3 - ratio2 (ES2) - FAST */
+ {S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
+ R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+ R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+ V24XX_SDRC_RFR_CTRL_110MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5a - ratio1 - FAST */
+ {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ V24XX_SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5b - ratio1 - FAST */
+ {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ V24XX_SDRC_RFR_CTRL_100MHz,
+ RATE_IN_243X},
+
+ /* PRCM #3 - ratio2 (ES2) - SLOW */
+ {S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
+ R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+ R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+ V24XX_SDRC_RFR_CTRL_110MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5a - ratio1 - SLOW */
+ {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ V24XX_SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5b - ratio1 - SLOW*/
+ {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ V24XX_SDRC_RFR_CTRL_100MHz,
+ RATE_IN_243X},
+
+ /* PRCM-boot/bypass */
+ {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
+ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+ RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+ V24XX_SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_243X},
+
+ /* PRCM-boot/bypass */
+ {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
+ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+ RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+ V24XX_SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_243X},
+
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
+
+/*-------------------------------------------------------------------------
+ * 24xx clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent. In many
+ * cases the parent is selectable. The get/set parent calls will also
+ * switch sources.
+ *
+ * Many some clocks say always_enabled, but they can be auto idled for
+ * power savings. They will always be available upon clock request.
+ *
+ * Several sources are given initial rates which may be wrong, this will
+ * be fixed up in the init func.
+ *
+ * Things are broadly separated below by clock domains. It is
+ * noteworthy that most periferals have dependencies on multiple clock
+ * domains. Many get their interface clocks from the L4 domain, but get
+ * functional clocks from fixed sources or other core domain derived
+ * clocks.
+ *-------------------------------------------------------------------------*/
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+ .name = "func_32k_ck",
+ .rate = 32000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | ALWAYS_ENABLED,
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
+ .name = "osc_ck",
+ .rate = 26000000, /* fixed up in clock init */
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+};
+
+/* With out modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
+ .name = "sys_ck", /* ~ ref_clk also */
+ .parent = &osc_ck,
+ .rate = 13000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ .rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */
+ .recalc = &omap2_sys_clk_recalc,
+};
+
+static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
+ .name = "alt_ck",
+ .rate = 54000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ .recalc = &omap2_propagate_rate,
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+static struct clk dpll_ck = {
+ .name = "dpll_ck",
+ .parent = &sys_ck, /* Can be func_32k also */
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk apll96_ck = {
+ .name = "apll96_ck",
+ .parent = &sys_ck,
+ .rate = 96000000,
+ .flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X |
+ RATE_FIXED | RATE_PROPAGATES,
+ .enable_reg = (void __iomem *)&CM_CLKEN_PLL,
+ .enable_bit = 0x2,
+ .recalc = &omap2_propagate_rate,
+};
+
+static struct clk apll54_ck = {
+ .name = "apll54_ck",
+ .parent = &sys_ck,
+ .rate = 54000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | RATE_PROPAGATES,
+ .enable_reg = (void __iomem *)&CM_CLKEN_PLL,
+ .enable_bit = 0x6,
+ .recalc = &omap2_propagate_rate,
+};
+
+/*
+ * PRCM digital base sources
+ */
+static struct clk func_54m_ck = {
+ .name = "func_54m_ck",
+ .parent = &apll54_ck, /* can also be alt_clk */
+ .rate = 54000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
+ .src_offset = 5,
+ .enable_reg = (void __iomem *)&CM_CLKEN_PLL,
+ .enable_bit = 0xff,
+ .recalc = &omap2_propagate_rate,
+};
+
+static struct clk core_ck = {
+ .name = "core_ck",
+ .parent = &dpll_ck, /* can also be 32k */
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ ALWAYS_ENABLED | RATE_PROPAGATES,
+ .recalc = &omap2_propagate_rate,
+};
+
+static struct clk sleep_ck = { /* sys_clk or 32k */
+ .name = "sleep_ck",
+ .parent = &func_32k_ck,
+ .rate = 32000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .recalc = &omap2_propagate_rate,
+};
+
+static struct clk func_96m_ck = {
+ .name = "func_96m_ck",
+ .parent = &apll96_ck,
+ .rate = 96000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | RATE_PROPAGATES,
+ .enable_reg = (void __iomem *)&CM_CLKEN_PLL,
+ .enable_bit = 0xff,
+ .recalc = &omap2_propagate_rate,
+};
+
+static struct clk func_48m_ck = {
+ .name = "func_48m_ck",
+ .parent = &apll96_ck, /* 96M or Alt */
+ .rate = 48000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
+ .src_offset = 3,
+ .enable_reg = (void __iomem *)&CM_CLKEN_PLL,
+ .enable_bit = 0xff,
+ .recalc = &omap2_propagate_rate,
+};
+
+static struct clk func_12m_ck = {
+ .name = "func_12m_ck",
+ .parent = &func_48m_ck,
+ .rate = 12000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | RATE_PROPAGATES,
+ .recalc = &omap2_propagate_rate,
+ .enable_reg = (void __iomem *)&CM_CLKEN_PLL,
+ .enable_bit = 0xff,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+ .name = "ck_wdt1_osc",
+ .parent = &osc_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk sys_clkout = {
+ .name = "sys_clkout",
+ .parent = &func_54m_ck,
+ .rate = 54000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
+ .src_offset = 0,
+ .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL,
+ .enable_bit = 7,
+ .rate_offset = 3,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2 = {
+ .name = "sys_clkout2",
+ .parent = &func_54m_ck,
+ .rate = 54000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
+ .src_offset = 8,
+ .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL,
+ .enable_bit = 15,
+ .rate_offset = 11,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/*
+ * MPU clock domain
+ * Clocks:
+ * MPU_FCLK, MPU_ICLK
+ * INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static struct clk mpu_ck = { /* Control cpu */
+ .name = "mpu_ck",
+ .parent = &core_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL |
+ ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP |
+ CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .rate_offset = 0, /* bits 0-4 */
+ .recalc = &omap2_clksel_recalc,
+};
+
+/*
+ * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
+ * Clocks:
+ * 2430: IVA2.1_FCLK, IVA2.1_ICLK
+ * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
+ */
+static struct clk iva2_1_fck = {
+ .name = "iva2_1_fck",
+ .parent = &core_ck,
+ .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
+ DELAYED_APP | RATE_PROPAGATES |
+ CONFIG_PARTICIPANT,
+ .rate_offset = 0,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_DSP,
+ .enable_bit = 0,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk iva2_1_ick = {
+ .name = "iva2_1_ick",
+ .parent = &iva2_1_fck,
+ .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
+ DELAYED_APP | CONFIG_PARTICIPANT,
+ .rate_offset = 5,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/*
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static struct clk dsp_fck = {
+ .name = "dsp_fck",
+ .parent = &core_ck,
+ .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
+ DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .rate_offset = 0,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_DSP,
+ .enable_bit = 0,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk dsp_ick = {
+ .name = "dsp_ick", /* apparently ipi and isp */
+ .parent = &dsp_fck,
+ .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
+ DELAYED_APP | CONFIG_PARTICIPANT,
+ .rate_offset = 5,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_DSP,
+ .enable_bit = 1, /* for ipi */
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk iva1_ifck = {
+ .name = "iva1_ifck",
+ .parent = &core_ck,
+ .flags = CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL |
+ CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
+ .rate_offset= 8,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_DSP,
+ .enable_bit = 10,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/* IVA1 mpu/int/i/f clocks are /2 of parent */
+static struct clk iva1_mpu_int_ifck = {
+ .name = "iva1_mpu_int_ifck",
+ .parent = &iva1_ifck,
+ .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_DSP,
+ .enable_bit = 8,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ * CAM, HS-USB.
+ * F-CLOCK
+ * SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */
+ .name = "core_l3_ck",
+ .parent = &core_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
+ DELAYED_APP | CONFIG_PARTICIPANT |
+ RATE_PROPAGATES,
+ .rate_offset = 0,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk usb_l4_ick = { /* FS-USB interface clock */
+ .name = "usb_l4_ick",
+ .parent = &core_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP |
+ CONFIG_PARTICIPANT,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 0,
+ .rate_offset = 25,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static struct clk ssi_ssr_sst_fck = {
+ .name = "ssi_fck",
+ .parent = &core_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, /* bit 1 */
+ .enable_bit = 1,
+ .rate_offset = 20,
+ .recalc = &omap2_clksel_recalc,
+};
+
+/*
+ * GFX clock domain
+ * Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+static struct clk gfx_3d_fck = {
+ .name = "gfx_3d_fck",
+ .parent = &core_l3_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL | CM_GFX_SEL1,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_GFX,
+ .enable_bit = 2,
+ .rate_offset= 0,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk gfx_2d_fck = {
+ .name = "gfx_2d_fck",
+ .parent = &core_l3_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL | CM_GFX_SEL1,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_GFX,
+ .enable_bit = 1,
+ .rate_offset= 0,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk gfx_ick = {
+ .name = "gfx_ick", /* From l3 */
+ .parent = &core_l3_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_GFX, /* bit 0 */
+ .enable_bit = 0,
+ .recalc = &omap2_followparent_recalc,
+};
+
+/*
+ * Modem clock domain (2430)
+ * CLOCKS:
+ * MDM_OSC_CLK
+ * MDM_ICLK
+ */
+static struct clk mdm_ick = { /* used both as a ick and fck */
+ .name = "mdm_ick",
+ .parent = &core_ck,
+ .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 |
+ DELAYED_APP | CONFIG_PARTICIPANT,
+ .rate_offset = 0,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_MDM,
+ .enable_bit = 0,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk mdm_osc_ck = {
+ .name = "mdm_osc_ck",
+ .rate = 26000000,
+ .parent = &osc_ck,
+ .flags = CLOCK_IN_OMAP243X | RATE_FIXED,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_MDM,
+ .enable_bit = 1,
+ .recalc = &omap2_followparent_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks. Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static struct clk l4_ck = { /* used both as an ick and fck */
+ .name = "l4_ck",
+ .parent = &core_l3_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
+ DELAYED_APP | RATE_PROPAGATES,
+ .rate_offset = 5,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk ssi_l4_ick = {
+ .name = "ssi_l4_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, /* bit 1 */
+ .enable_bit = 1,
+ .recalc = &omap2_followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */
+ .name = "dss_ick",
+ .parent = &l4_ck, /* really both l3 and l4 */
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 0,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+ .name = "dss1_fck",
+ .parent = &core_ck, /* Core or sys */
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 0,
+ .rate_offset = 8,
+ .src_offset = 8,
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk dss2_fck = { /* Alt clk used in power management */
+ .name = "dss2_fck",
+ .parent = &sys_ck, /* fixed at sys_ck or 48MHz */
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 1,
+ .src_offset = 13,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk dss_54m_fck = { /* Alt clk used in power management */
+ .name = "dss_54m_fck", /* 54m tv clk */
+ .parent = &func_54m_ck,
+ .rate = 54000000,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ RATE_FIXED | RATE_PROPAGATES,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 2,
+ .recalc = &omap2_propagate_rate,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static struct clk gpt1_ick = {
+ .name = "gpt1_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, /* Bit4 */
+ .enable_bit = 0,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+ .name = "gpt1_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_WKUP_SEL1,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP,
+ .enable_bit = 0,
+ .src_offset = 0,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+ .name = "gpt2_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit4 */
+ .enable_bit = 0,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+ .name = "gpt2_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 4,
+ .src_offset = 2,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+ .name = "gpt3_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit5 */
+ .enable_bit = 5,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+ .name = "gpt3_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 5,
+ .src_offset = 4,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+ .name = "gpt4_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit6 */
+ .enable_bit = 6,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+ .name = "gpt4_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 6,
+ .src_offset = 6,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+ .name = "gpt5_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit7 */
+ .enable_bit = 7,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+ .name = "gpt5_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 7,
+ .src_offset = 8,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+ .name = "gpt6_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_bit = 8,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit8 */
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+ .name = "gpt6_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 8,
+ .src_offset = 10,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+ .name = "gpt7_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit9 */
+ .enable_bit = 9,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+ .name = "gpt7_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 9,
+ .src_offset = 12,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+ .name = "gpt8_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit10 */
+ .enable_bit = 10,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+ .name = "gpt8_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 10,
+ .src_offset = 14,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+ .name = "gpt9_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 11,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+ .name = "gpt9_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 11,
+ .src_offset = 16,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+ .name = "gpt10_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 12,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+ .name = "gpt10_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 12,
+ .src_offset = 18,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+ .name = "gpt11_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 13,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+ .name = "gpt11_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 13,
+ .src_offset = 20,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt12_ick = {
+ .name = "gpt12_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit14 */
+ .enable_bit = 14,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+ .name = "gpt12_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ CM_CORE_SEL2,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 14,
+ .src_offset = 22,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+ .name = "mcbsp1_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_bit = 15,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit16 */
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+ .name = "mcbsp1_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_bit = 15,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+ .name = "mcbsp2_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_bit = 16,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+ .name = "mcbsp2_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_bit = 16,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+ .name = "mcbsp3_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 3,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+ .name = "mcbsp3_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 3,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+ .name = "mcbsp4_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 4,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+ .name = "mcbsp4_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 4,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+ .name = "mcbsp5_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 5,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcbsp5_fck = {
+ .name = "mcbsp5_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 5,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+ .name = "mcspi1_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 17,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+ .name = "mcspi1_fck",
+ .parent = &func_48m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 17,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+ .name = "mcspi2_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 18,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+ .name = "mcspi2_fck",
+ .parent = &func_48m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 18,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+ .name = "mcspi3_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 9,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+ .name = "mcspi3_fck",
+ .parent = &func_48m_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 9,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+ .name = "uart1_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 21,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+ .name = "uart1_fck",
+ .parent = &func_48m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 21,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+ .name = "uart2_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 22,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+ .name = "uart2_fck",
+ .parent = &func_48m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 22,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+ .name = "uart3_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 2,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+ .name = "uart3_fck",
+ .parent = &func_48m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 2,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+ .name = "gpios_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
+ .enable_bit = 2,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+ .name = "gpios_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP,
+ .enable_bit = 2,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+ .name = "mpu_wdt_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
+ .enable_bit = 3,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+ .name = "mpu_wdt_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP,
+ .enable_bit = 3,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+ .name = "sync_32k_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
+ .enable_bit = 1,
+ .recalc = &omap2_followparent_recalc,
+};
+static struct clk wdt1_ick = {
+ .name = "wdt1_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
+ .enable_bit = 4,
+ .recalc = &omap2_followparent_recalc,
+};
+static struct clk omapctrl_ick = {
+ .name = "omapctrl_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
+ .enable_bit = 5,
+ .recalc = &omap2_followparent_recalc,
+};
+static struct clk icr_ick = {
+ .name = "icr_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
+ .enable_bit = 6,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk cam_ick = {
+ .name = "cam_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 31,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk cam_fck = {
+ .name = "cam_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 31,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+ .name = "mailboxes_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 30,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+ .name = "wdt4_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 29,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+ .name = "wdt4_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 29,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+ .name = "wdt3_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 28,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+ .name = "wdt3_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 28,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+ .name = "mspro_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 27,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+ .name = "mspro_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 27,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mmc_ick = {
+ .name = "mmc_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 26,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mmc_fck = {
+ .name = "mmc_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 26,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk fac_ick = {
+ .name = "fac_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 25,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk fac_fck = {
+ .name = "fac_fck",
+ .parent = &func_12m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 25,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk eac_ick = {
+ .name = "eac_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 24,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk eac_fck = {
+ .name = "eac_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 24,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+ .name = "hdq_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 23,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+ .name = "hdq_fck",
+ .parent = &func_12m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 23,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+ .name = "i2c2_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 20,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+ .name = "i2c2_fck",
+ .parent = &func_12m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 20,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk i2chs2_fck = {
+ .name = "i2chs2_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 20,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+ .name = "i2c1_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 19,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+ .name = "i2c1_fck",
+ .parent = &func_12m_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 19,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk i2chs1_fck = {
+ .name = "i2chs1_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 19,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk vlynq_ick = {
+ .name = "vlynq_ick",
+ .parent = &core_l3_ck,
+ .flags = CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
+ .enable_bit = 3,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk vlynq_fck = {
+ .name = "vlynq_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
+ .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
+ .enable_bit = 3,
+ .src_offset = 15,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+ .name = "sdrc_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN3_CORE,
+ .enable_bit = 2,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk des_ick = {
+ .name = "des_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
+ .enable_bit = 0,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk sha_ick = {
+ .name = "sha_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
+ .enable_bit = 1,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk rng_ick = {
+ .name = "rng_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
+ .enable_bit = 2,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk aes_ick = {
+ .name = "aes_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
+ .enable_bit = 3,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk pka_ick = {
+ .name = "pka_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
+ .enable_bit = 4,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk usb_fck = {
+ .name = "usb_fck",
+ .parent = &func_48m_ck,
+ .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 0,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk usbhs_ick = {
+ .name = "usbhs_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 6,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+ .name = "mmchs1_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 7,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+ .name = "mmchs1_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 7,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+ .name = "mmchs2_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 8,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+ .name = "mmchs2_fck",
+ .parent = &func_96m_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 8,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+ .name = "gpio5_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 10,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+ .name = "gpio5_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 10,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mdm_intc_ick = {
+ .name = "mdm_intc_ick",
+ .parent = &l4_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
+ .enable_bit = 11,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mmchsdb1_fck = {
+ .name = "mmchsdb1_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 16,
+ .recalc = &omap2_followparent_recalc,
+};
+
+static struct clk mmchsdb2_fck = {
+ .name = "mmchsdb2_fck",
+ .parent = &func_32k_ck,
+ .flags = CLOCK_IN_OMAP243X,
+ .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
+ .enable_bit = 17,
+ .recalc = &omap2_followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+ .name = "virt_prcm_set",
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+ .parent = &mpu_ck, /* Indexed by mpu speed, no parent */
+ .recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */
+ .set_rate = &omap2_select_table_rate,
+ .round_rate = &omap2_round_to_table_rate,
+};
+
+static struct clk *onchip_clks[] = {
+ /* external root sources */
+ &func_32k_ck,
+ &osc_ck,
+ &sys_ck,
+ &alt_ck,
+ /* internal analog sources */
+ &dpll_ck,
+ &apll96_ck,
+ &apll54_ck,
+ /* internal prcm root sources */
+ &func_54m_ck,
+ &core_ck,
+ &sleep_ck,
+ &func_96m_ck,
+ &func_48m_ck,
+ &func_12m_ck,
+ &wdt1_osc_ck,
+ &sys_clkout,
+ &sys_clkout2,
+ /* mpu domain clocks */
+ &mpu_ck,
+ /* dsp domain clocks */
+ &iva2_1_fck, /* 2430 */
+ &iva2_1_ick,
+ &dsp_ick, /* 2420 */
+ &dsp_fck,
+ &iva1_ifck,
+ &iva1_mpu_int_ifck,
+ /* GFX domain clocks */
+ &gfx_3d_fck,
+ &gfx_2d_fck,
+ &gfx_ick,
+ /* Modem domain clocks */
+ &mdm_ick,
+ &mdm_osc_ck,
+ /* DSS domain clocks */
+ &dss_ick,
+ &dss1_fck,
+ &dss2_fck,
+ &dss_54m_fck,
+ /* L3 domain clocks */
+ &core_l3_ck,
+ &ssi_ssr_sst_fck,
+ &usb_l4_ick,
+ /* L4 domain clocks */
+ &l4_ck, /* used as both core_l4 and wu_l4 */
+ &ssi_l4_ick,
+ /* virtual meta-group clock */
+ &virt_prcm_set,
+ /* general l4 interface ck, multi-parent functional clk */
+ &gpt1_ick,
+ &gpt1_fck,
+ &gpt2_ick,
+ &gpt2_fck,
+ &gpt3_ick,
+ &gpt3_fck,
+ &gpt4_ick,
+ &gpt4_fck,
+ &gpt5_ick,
+ &gpt5_fck,
+ &gpt6_ick,
+ &gpt6_fck,
+ &gpt7_ick,
+ &gpt7_fck,
+ &gpt8_ick,
+ &gpt8_fck,
+ &gpt9_ick,
+ &gpt9_fck,
+ &gpt10_ick,
+ &gpt10_fck,
+ &gpt11_ick,
+ &gpt11_fck,
+ &gpt12_ick,
+ &gpt12_fck,
+ &mcbsp1_ick,
+ &mcbsp1_fck,
+ &mcbsp2_ick,
+ &mcbsp2_fck,
+ &mcbsp3_ick,
+ &mcbsp3_fck,
+ &mcbsp4_ick,
+ &mcbsp4_fck,
+ &mcbsp5_ick,
+ &mcbsp5_fck,
+ &mcspi1_ick,
+ &mcspi1_fck,
+ &mcspi2_ick,
+ &mcspi2_fck,
+ &mcspi3_ick,
+ &mcspi3_fck,
+ &uart1_ick,
+ &uart1_fck,
+ &uart2_ick,
+ &uart2_fck,
+ &uart3_ick,
+ &uart3_fck,
+ &gpios_ick,
+ &gpios_fck,
+ &mpu_wdt_ick,
+ &mpu_wdt_fck,
+ &sync_32k_ick,
+ &wdt1_ick,
+ &omapctrl_ick,
+ &icr_ick,
+ &cam_fck,
+ &cam_ick,
+ &mailboxes_ick,
+ &wdt4_ick,
+ &wdt4_fck,
+ &wdt3_ick,
+ &wdt3_fck,
+ &mspro_ick,
+ &mspro_fck,
+ &mmc_ick,
+ &mmc_fck,
+ &fac_ick,
+ &fac_fck,
+ &eac_ick,
+ &eac_fck,
+ &hdq_ick,
+ &hdq_fck,
+ &i2c1_ick,
+ &i2c1_fck,
+ &i2chs1_fck,
+ &i2c2_ick,
+ &i2c2_fck,
+ &i2chs2_fck,
+ &vlynq_ick,
+ &vlynq_fck,
+ &sdrc_ick,
+ &des_ick,
+ &sha_ick,
+ &rng_ick,
+ &aes_ick,
+ &pka_ick,
+ &usb_fck,
+ &usbhs_ick,
+ &mmchs1_ick,
+ &mmchs1_fck,
+ &mmchs2_ick,
+ &mmchs2_fck,
+ &gpio5_ick,
+ &gpio5_fck,
+ &mdm_intc_ick,
+ &mmchsdb1_fck,
+ &mmchsdb2_fck,
+};
+
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 00:25:39 +0000