aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/include/mach
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/include/mach')
-rw-r--r--arch/arm/mach-pxa/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-pxa/include/mach/dma.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/eseries-gpio.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/gumstix.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/h5000.h113
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h52
-rw-r--r--arch/arm/mach-pxa/include/mach/io.h6
-rw-r--r--arch/arm/mach-pxa/include/mach/littleton.h11
-rw-r--r--arch/arm/mach-pxa/include/mach/memory.h11
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa25x.h31
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa27x.h6
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa930.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/mioa701.h9
-rw-r--r--arch/arm/mach-pxa/include/mach/mtd-xip.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa-regs.h507
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h5
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa2xx-regs.h12
-rw-r--r--arch/arm/mach-pxa/include/mach/pxafb.h6
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-ac97.h99
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-lcd.h67
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-uart.h143
-rw-r--r--arch/arm/mach-pxa/include/mach/timex.h8
-rw-r--r--arch/arm/mach-pxa/include/mach/uncompress.h4
23 files changed, 536 insertions, 575 deletions
diff --git a/arch/arm/mach-pxa/include/mach/clkdev.h b/arch/arm/mach-pxa/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 955bfe60606..7804637a6df 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -30,10 +30,6 @@ typedef enum {
DMA_PRIO_LOW = 2
} pxa_dma_prio;
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK 1
-#endif
-
/*
* DMA registration
*/
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 4c90b131027..efbd2aa9ece 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -43,8 +43,10 @@
#define GPIO_E800_PCMCIA_PWR1 73
/* e7xx IrDA power control */
-#define GPIO_E7XX_IR_ON 38
+#define GPIO_E7XX_IR_OFF 38
/* ASIC related GPIOs */
#define GPIO_ESERIES_TMIO_IRQ 5
+#define GPIO_ESERIES_TMIO_PCLR 19
+#define GPIO_ESERIES_TMIO_SUSPEND 45
#define GPIO_E800_ANGELX_IRQ 8
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 42ee1956750..099f54a41de 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -94,3 +94,7 @@ has detected a cable insertion; driven low otherwise. */
#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN)
#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN)
#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN)
+
+/* for expansion boards that can't be programatically detected */
+extern int am200_init(void);
+
diff --git a/arch/arm/mach-pxa/include/mach/h5000.h b/arch/arm/mach-pxa/include/mach/h5000.h
new file mode 100644
index 00000000000..2a5ae380278
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/h5000.h
@@ -0,0 +1,113 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright(20)02 Hewlett-Packard Company.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks
+ */
+
+#ifndef __ASM_ARCH_H5000_H
+#define __ASM_ARCH_H5000_H
+
+#include <mach/mfp-pxa25x.h>
+
+/*
+ * CPU GPIOs
+ */
+
+#define H5000_GPIO_POWER_BUTTON (0)
+#define H5000_GPIO_RESET_BUTTON_N (1)
+#define H5000_GPIO_OPT_INT (2)
+#define H5000_GPIO_BACKUP_POWER (3)
+#define H5000_GPIO_ACTION_BUTTON (4)
+#define H5000_GPIO_COM_DCD_SOMETHING (5) /* what is this really ? */
+/* 6 not connected */
+#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
+/* 8 not connected */
+#define H5000_GPIO_RSO_N (9) /* reset output from max1702 which regulates 3.3 and 2.5 */
+#define H5000_GPIO_ASIC_INT_N (10) /* from companion asic */
+#define H5000_GPIO_BT_ENV_0 (11) /* to LMX9814, set to 1 according to regdump */
+/*(12) not connected */
+#define H5000_GPIO_BT_ENV_1 (13) /* to LMX9814, set to 1 according to regdump */
+#define H5000_GPIO_BT_WU (14) /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
+/*(15) is CS1# */
+/*(16) not connected */
+/*(17) not connected */
+/*(18) is pcmcia ready */
+/*(19) is dreq1 */
+/*(20) is dreq0 */
+#define H5000_GPIO_OE_RD_NWR (21) /* output enable on rd/nwr signal to companion asic */
+/*(22) is not connected */
+#define H5000_GPIO_OPT_SPI_CLK (23) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_CS_N (24) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DOUT (25) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DIN (26) /* to extension pack */
+/*(27) not connected */
+#define H5000_GPIO_I2S_BITCLK (28) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAOUT (29) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAIN (30) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_LRCLK (31) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_SYSCLK (32) /* connected to AC97 codec */
+/*(33) is CS5# */
+#define H5000_GPIO_COM_RXD (34) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_CTS (35) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DCD (36) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DSR (37) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RI (38) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_TXD (39) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DTR (40) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RTS (41) /* connected to cradle/cable connector */
+
+#define H5000_GPIO_BT_RXD (42) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_TXD (43) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_CTS (44) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_RTS (45) /* connected to BT (LMX9814) */
+
+#define H5000_GPIO_IRDA_RXD (46)
+#define H5000_GPIO_IRDA_TXD (47)
+
+#define H5000_GPIO_POE_N (48) /* used for pcmcia */
+#define H5000_GPIO_PWE_N (49) /* used for pcmcia */
+#define H5000_GPIO_PIOR_N (50) /* used for pcmcia */
+#define H5000_GPIO_PIOW_N (51) /* used for pcmcia */
+#define H5000_GPIO_PCE1_N (52) /* used for pcmcia */
+#define H5000_GPIO_PCE2_N (53) /* used for pcmcia */
+#define H5000_GPIO_PSKTSEL (54) /* used for pcmcia */
+#define H5000_GPIO_PREG_N (55) /* used for pcmcia */
+#define H5000_GPIO_PWAIT_N (56) /* used for pcmcia */
+#define H5000_GPIO_IOIS16_N (57) /* used for pcmcia */
+
+#define H5000_GPIO_IRDA_SD (58) /* to hsdl3002 sd */
+/*(59) not connected */
+#define H5000_GPIO_POWER_SD_N (60) /* controls power to SD */
+#define H5000_GPIO_POWER_RS232_N (61) /* inverted FORCEON to rs232 transceiver */
+#define H5000_GPIO_POWER_ACCEL_N (62) /* controls power to accel */
+/*(63) is not connected */
+#define H5000_GPIO_OPT_NVRAM (64) /* controls power to expansion pack */
+#define H5000_GPIO_CHG_EN (65) /* to sc801 en */
+#define H5000_GPIO_USB_PULLUP (66) /* USB d+ pullup via 1.5K resistor */
+#define H5000_GPIO_BT_2V8_N (67) /* 2.8V used by bluetooth */
+#define H5000_GPIO_EXT_CHG_RATE (68) /* enables external charging rate */
+/*(69) is not connected */
+#define H5000_GPIO_CIR_RESET (70) /* consumer IR reset */
+#define H5000_GPIO_POWER_LIGHT_SENSOR_N (71)
+#define H5000_GPIO_BT_M_RESET (72)
+#define H5000_GPIO_STD_CHG_RATE (73)
+#define H5000_GPIO_SD_WP_N (74)
+#define H5000_GPIO_MOTOR_ON_N (75) /* external pullup on this */
+#define H5000_GPIO_HEADPHONE_DETECT (76)
+#define H5000_GPIO_USB_CHG_RATE (77) /* select rate for charging via usb */
+/*(78) is CS2# */
+/*(79) is CS3# */
+/*(80) is CS4# */
+
+#endif /* __ASM_ARCH_H5000_H */
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index a582a6d9b92..16ab79547da 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -102,6 +102,9 @@
* PXA930 B0 0x69056835 0x5E643013
* PXA930 B1 0x69056837 0x7E643013
* PXA930 B2 0x69056838 0x8E643013
+ *
+ * PXA935 A0 0x56056931 0x1E653013
+ * PXA935 B0 0x56056936 0x6E653013
*/
#ifdef CONFIG_PXA25x
#define __cpu_is_pxa210(id) \
@@ -178,12 +181,22 @@
#define __cpu_is_pxa930(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x683; \
+ _id == 0x683; \
})
#else
#define __cpu_is_pxa930(id) (0)
#endif
+#ifdef CONFIG_CPU_PXA935
+#define __cpu_is_pxa935(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x693; \
+ })
+#else
+#define __cpu_is_pxa935(id) (0)
+#endif
+
#define cpu_is_pxa210() \
({ \
__cpu_is_pxa210(read_cpuid_id()); \
@@ -204,8 +217,6 @@
__cpu_is_pxa25x(read_cpuid_id()); \
})
-extern int cpu_is_pxa26x(void);
-
#define cpu_is_pxa27x() \
({ \
__cpu_is_pxa27x(read_cpuid_id()); \
@@ -232,6 +243,12 @@ extern int cpu_is_pxa26x(void);
__cpu_is_pxa930(id); \
})
+#define cpu_is_pxa935() \
+ ({ \
+ unsigned int id = read_cpuid(CPUID_ID); \
+ __cpu_is_pxa935(id); \
+ })
+
/*
* CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
@@ -249,6 +266,12 @@ extern int cpu_is_pxa26x(void);
_id == 0x3; \
})
+#define __cpu_is_pxa9xx(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x683 || _id == 0x693; \
+ })
+
#define cpu_is_pxa2xx() \
({ \
__cpu_is_pxa2xx(read_cpuid_id()); \
@@ -259,32 +282,25 @@ extern int cpu_is_pxa26x(void);
__cpu_is_pxa3xx(read_cpuid_id()); \
})
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
+#define cpu_is_pxa9xx() \
+ ({ \
+ __cpu_is_pxa9xx(read_cpuid_id()); \
+ })
/*
* return current memory and LCD clock frequency in units of 10kHz
*/
extern unsigned int get_memclk_frequency_10khz(void);
+/* return the clock tick rate of the OS timer */
+extern unsigned long get_clock_tick_rate(void);
#endif
#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
#define PCIBIOS_MIN_IO 0
#define PCIBIOS_MIN_MEM 0
#define pcibios_assign_all_busses() 1
+#define HAVE_ARCH_PCI_SET_DMA_MASK 1
#endif
+
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 600fd4f7660..262691fb97d 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,15 +6,13 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <mach/hardware.h>
-
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 5c4e320c143..6c9b21c5132 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,8 +1,13 @@
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
+#ifndef __ASM_ARCH_LITTLETON_H
+#define __ASM_ARCH_LITTLETON_H
+
+#include <mach/gpio.h>
#define LITTLETON_ETH_PHYS 0x30000000
#define LITTLETON_GPIO_LCD_CS (17)
-#endif /* __ASM_ARCH_ZYLONITE_H */
+#define EXT0_GPIO_BASE (NR_BUILTIN_GPIO)
+#define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x))
+
+#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 59aef89808d..f626730ee42 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -18,16 +18,6 @@
#define PHYS_OFFSET UL(0xa0000000)
/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
* The nodes are matched with the physical SDRAM banks as follows:
*
* node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff
@@ -47,6 +37,7 @@ void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
cmx2xx_pci_adjust_zones(node, size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
#endif
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 617cab2cc8d..a72869b73ee 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -158,4 +158,35 @@
#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO */
+#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF1)
+#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF1)
+#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF1)
+
+/* SDRAM */
+#define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
+#define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
+#define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
+#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+
+/* USB */
+#define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1)
+#define GPIO32_USB_VP MFP_CFG_IN(GPIO32, AF2)
+#define GPIO34_USB_VM MFP_CFG_IN(GPIO34, AF2)
+#define GPIO39_USB_VPO MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
+#define GPIO56_USB_VMO MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO57_USB_nOE MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
+
+/* ASSP */
+#define GPIO28_ASSP_BITCLK_IN MFP_CFG_IN(GPIO28, AF3)
+#define GPIO28_ASSP_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
+#define GPIO29_ASSP_RXD MFP_CFG_IN(GPIO29, AF3)
+#define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1)
+#define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#endif
+
#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 122bdbd5318..da4f85a4f99 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -11,6 +11,12 @@
#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
+/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
+ * bit is set, regardless of the GPIO configuration
+ */
+#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
+
/* GPIO */
#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index fabd9b4df82..fa73f56a137 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -421,6 +421,7 @@
#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+#define GPIO32_PWM0 MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
/* CIR */
#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
index 8483cb51183..02868447b0b 100644
--- a/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -10,12 +10,14 @@
(MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
/* Global GPIOs */
-#define GPIO9_CHARGE_nEN 9
+#define GPIO9_CHARGE_EN 9
#define GPIO18_POWEROFF 18
#define GPIO87_LCD_POWER 87
+#define GPIO96_AC_DETECT 96
+#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
/* USB */
-#define GPIO13_USB_DETECT 13
+#define GPIO13_nUSB_DETECT 13
#define GPIO22_USB_ENABLE 22
/* SDIO bits */
@@ -24,7 +26,10 @@
#define GPIO91_SDIO_EN 91
/* Bluetooth */
+#define GPIO14_BT_nACTIVITY 14
#define GPIO83_BT_ON 83
+#define GPIO77_BT_UNKNOWN1 77
+#define GPIO86_BT_MAYBE_nRESET 86
/* GPS */
#define GPIO23_GPS_UNKNOWN1 23
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 4d452fcb150..cfca8155be7 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,6 +15,7 @@
#ifndef __ARCH_PXA_MTD_XIP_H__
#define __ARCH_PXA_MTD_XIP_H__
+#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#define xip_irqpending() (ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 15295d96000..31d615aa772 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -13,6 +13,7 @@
#ifndef __PXA_REGS_H
#define __PXA_REGS_H
+#include <mach/hardware.h>
/*
* PXA Chip selects
@@ -123,298 +124,6 @@
#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART FFRBR
-#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
-#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
-#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
-#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
-#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
-#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
-#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
-#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
-#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
-#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
-#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
-#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART BTRBR
-#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
-#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
-#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
-#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
-#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
-#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
-#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
-#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
-#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
-#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
-#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
-#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART STRBR
-#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
-#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
-#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
-#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
-#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
-#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
-#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
-#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
-#define STMSR __REG(0x40700018) /* Reserved */
-#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
-#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
-#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART HWRBR
-#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
-#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
-#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
-#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
-#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
-#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
-#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
-#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
-#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
-#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
-#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
-#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
-#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
-#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
-#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE (1 << 7) /* DMA Requests Enable */
-#define IER_UUE (1 << 6) /* UART Unit Enable */
-#define IER_NRZE (1 << 5) /* NRZ coding Enable */
-#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
-#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
-#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
-#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
-#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
-#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
-#define IIR_TOD (1 << 3) /* Time Out Detected */
-#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
-#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
-#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
-
-#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
-#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
-#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
-#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
-#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1 (0)
-#define FCR_ITL_8 (FCR_ITL1)
-#define FCR_ITL_16 (FCR_ITL2)
-#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
-#define LCR_SB (1 << 6) /* Set Break */
-#define LCR_STKYP (1 << 5) /* Sticky Parity */
-#define LCR_EPS (1 << 4) /* Even Parity Select */
-#define LCR_PEN (1 << 3) /* Parity Enable */
-#define LCR_STB (1 << 2) /* Stop Bit */
-#define LCR_WLS1 (1 << 1) /* Word Length Select */
-#define LCR_WLS0 (1 << 0) /* Word Length Select */
-
-#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
-#define LSR_TEMT (1 << 6) /* Transmitter Empty */
-#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
-#define LSR_BI (1 << 4) /* Break Interrupt */
-#define LSR_FE (1 << 3) /* Framing Error */
-#define LSR_PE (1 << 2) /* Parity Error */
-#define LSR_OE (1 << 1) /* Overrun Error */
-#define LSR_DR (1 << 0) /* Data Ready */
-
-#define MCR_LOOP (1 << 4)
-#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
-#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
-#define MCR_RTS (1 << 1) /* Request to Send */
-#define MCR_DTR (1 << 0) /* Data Terminal Ready */
-
-#define MSR_DCD (1 << 7) /* Data Carrier Detect */
-#define MSR_RI (1 << 6) /* Ring Indicator */
-#define MSR_DSR (1 << 5) /* Data Set Ready */
-#define MSR_CTS (1 << 4) /* Clear To Send */
-#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
-#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
-#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
-#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
-#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
-#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
-#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
-#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
-
-
-/*
- * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
- */
-
-/*
- * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
- */
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR __REG(0x40500000) /* PCM Out Control Register */
-#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define PICR __REG(0x40500004) /* PCM In Control Register */
-#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MCCR __REG(0x40500008) /* Mic In Control Register */
-#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define GCR __REG(0x4050000C) /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
-#endif
-#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
-#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
-#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
-#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
-#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
-
-#define POSR __REG(0x40500010) /* PCM Out Status Register */
-#define POSR_FIFOE (1 << 4) /* FIFO error */
-#define POSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define PISR __REG(0x40500014) /* PCM In Status Register */
-#define PISR_FIFOE (1 << 4) /* FIFO error */
-#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MCSR __REG(0x40500018) /* Mic In Status Register */
-#define MCSR_FIFOE (1 << 4) /* FIFO error */
-#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define GSR __REG(0x4050001C) /* Global Status Register */
-#define GSR_CDONE (1 << 19) /* Command Done */
-#define GSR_SDONE (1 << 18) /* Status Done */
-#define GSR_RDCS (1 << 15) /* Read Completion Status */
-#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
-#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
-#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
-#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
-#define GSR_PCR (1 << 8) /* Primary Codec Ready */
-#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
-#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
-#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
-#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
-#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
-#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
-#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
-
-#define CAR __REG(0x40500020) /* CODEC Access Register */
-#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
-
-#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
-#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
-
-#define MOCR __REG(0x40500100) /* Modem Out Control Register */
-#define MOCR_FEIE (1 << 3) /* FIFO Error */
-#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MICR __REG(0x40500108) /* Modem In Control Register */
-#define MICR_FEIE (1 << 3) /* FIFO Error */
-#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
-
-#define MOSR __REG(0x40500110) /* Modem Out Status Register */
-#define MOSR_FIFOE (1 << 4) /* FIFO error */
-#define MOSR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MISR __REG(0x40500118) /* Modem In Status Register */
-#define MISR_FIFOE (1 << 4) /* FIFO error */
-#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR (1 << 2) /* FIFO Service Request */
-
-#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
-#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
-#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
-#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
-
-
-/*
- * Fast Infrared Communication Port
- */
-
-#define FICP __REG(0x40800000) /* Start of FICP area */
-#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
-#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
-#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
-#define ICDR __REG(0x4080000c) /* ICP Data Register */
-#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
-#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
-
-#define ICCR0_AME (1 << 7) /* Address match enable */
-#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
-#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
-#define ICCR0_RXE (1 << 4) /* Receive enable */
-#define ICCR0_TXE (1 << 3) /* Transmit enable */
-#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
-#define ICCR0_LBM (1 << 1) /* Loopback mode */
-#define ICCR0_ITR (1 << 0) /* IrDA transmission */
-
-#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
-#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
-#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
-#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
-#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
-#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
-
-#ifdef CONFIG_PXA27x
-#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
-#endif
-#define ICSR0_FRE (1 << 5) /* Framing error */
-#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
-#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
-#define ICSR0_RAB (1 << 2) /* Receiver abort */
-#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
-#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
-
-#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
-#define ICSR1_CRE (1 << 5) /* CRC error */
-#define ICSR1_EOF (1 << 4) /* End of frame */
-#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
-#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
-#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
-#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
-
-
/*
* Real Time Clock
*/
@@ -463,19 +172,6 @@
/*
- * Pulse Width Modulator
- */
-
-#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
-#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
-
-#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
-#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
-
-
-/*
* Interrupt Controller
*/
@@ -496,19 +192,6 @@
* General Purpose I/O
*/
-#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
-
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
@@ -558,10 +241,6 @@
#define GPIO_bit(x) (1 << ((x) & 0x1f))
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-/* Interrupt Controller */
-
#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
@@ -580,189 +259,5 @@
#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
-/*
- * Power Manager - see pxa2xx-regs.h
- */
-
-/*
- * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
- */
-
-/*
- * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
- */
-
-/*
- * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
- */
-
-#ifdef CONFIG_PXA27x
-
-/* Camera Interface */
-#define CICR0 __REG(0x50000000)
-#define CICR1 __REG(0x50000004)
-#define CICR2 __REG(0x50000008)
-#define CICR3 __REG(0x5000000C)
-#define CICR4 __REG(0x50000010)
-#define CISR __REG(0x50000014)
-#define CIFR __REG(0x50000018)
-#define CITOR __REG(0x5000001C)
-#define CIBR0 __REG(0x50000028)
-#define CIBR1 __REG(0x50000030)
-#define CIBR2 __REG(0x50000038)
-
-#define CICR0_DMAEN (1 << 31) /* DMA request enable */
-#define CICR0_PAR_EN (1 << 30) /* Parity enable */
-#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
-#define CICR0_ENB (1 << 28) /* Camera interface enable */
-#define CICR0_DIS (1 << 27) /* Camera interface disable */
-#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
-#define CICR0_TOM (1 << 9) /* Time-out mask */
-#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
-#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
-#define CICR0_EOLM (1 << 6) /* End-of-line mask */
-#define CICR0_PERRM (1 << 5) /* Parity-error mask */
-#define CICR0_QDM (1 << 4) /* Quick-disable mask */
-#define CICR0_CDM (1 << 3) /* Disable-done mask */
-#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
-#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
-#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
-
-#define CICR1_TBIT (1 << 31) /* Transparency bit */
-#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */
-#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
-#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
-#define CICR1_RGB_F (1 << 11) /* RGB format */
-#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
-#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
-#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
-#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
-#define CICR1_DW (0x7 << 0) /* Data width mask */
-
-#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
- wait count mask */
-#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
- wait count mask */
-#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
-#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
- wait count mask */
-#define CICR2_FSW (0x7 << 0) /* Frame stabilization
- wait count mask */
-
-#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
- wait count mask */
-#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
- wait count mask */
-#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
-#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
- wait count mask */
-#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
-
-#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
-#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
-#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
-#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
-#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
-#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
-#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
-#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
-
-#define CISR_FTO (1 << 15) /* FIFO time-out */
-#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
-#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
-#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
-#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
-#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
-#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
-#define CISR_EOL (1 << 8) /* End of line */
-#define CISR_PAR_ERR (1 << 7) /* Parity error */
-#define CISR_CQD (1 << 6) /* Camera interface quick disable */
-#define CISR_CDD (1 << 5) /* Camera interface disable done */
-#define CISR_SOF (1 << 4) /* Start of frame */
-#define CISR_EOF (1 << 3) /* End of frame */
-#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
-#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
-#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
-
-#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
-#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
-#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
-#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
-#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
-#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
-#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
-#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
-
-#define SRAM_SIZE 0x40000 /* 4x64K */
-
-#define SRAM_MEM_PHYS 0x5C000000
-
-#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */
-#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */
-
-#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */
-#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */
-#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */
-#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */
-
-#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */
-#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */
-#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */
-#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */
-
-#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */
-#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */
-#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */
-#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */
-
-#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */
-#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */
-#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */
-#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */
-
-#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */
-#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */
-#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */
-#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */
-
-#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */
-
-#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */
-#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */
-#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */
-
-#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */
-#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */
-#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */
-
-#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */
-#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */
-#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */
-
-#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */
-#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */
-#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */
-
-#endif
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE 0x1
-#define PWRMODE_STANDBY 0x2
-#define PWRMODE_SLEEP 0x3
-#define PWRMODE_DEEPSLEEP 0x7
#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index 6ef1dd09970..d83393e2527 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -365,4 +365,9 @@
#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN)
#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN)
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 806ecfea44b..77102d695cc 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -49,6 +49,11 @@
#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
+
#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
@@ -243,4 +248,11 @@
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE 0x1
+#define PWRMODE_STANDBY 0x2
+#define PWRMODE_SLEEP 0x3
+#define PWRMODE_DEEPSLEEP 0x7
+
#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index cbda4d35c42..6932720ba04 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -48,6 +48,7 @@
#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT)
#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
@@ -94,6 +95,10 @@ struct pxafb_mode_info {
* in pxa27x and pxa3xx, initialize them to the same value or
* the larger one will be used
* 3. same to {rd,wr}_pulse_width
+ *
+ * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
+ * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
+ * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
*/
unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
@@ -108,6 +113,7 @@ struct pxafb_mach_info {
unsigned int num_modes;
unsigned int lcd_conn;
+ unsigned long video_mem_size;
u_int fixed_modes:1,
cmap_inverse:1,
diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h
new file mode 100644
index 00000000000..e41b9d202b8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ac97.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR __REG(0x40500000) /* PCM Out Control Register */
+#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define PICR __REG(0x40500004) /* PCM In Control Register */
+#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MCCR __REG(0x40500008) /* Mic In Control Register */
+#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define GCR __REG(0x4050000C) /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
+#endif
+#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
+#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
+#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
+#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
+
+#define POSR __REG(0x40500010) /* PCM Out Status Register */
+#define POSR_FIFOE (1 << 4) /* FIFO error */
+#define POSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define PISR __REG(0x40500014) /* PCM In Status Register */
+#define PISR_FIFOE (1 << 4) /* FIFO error */
+#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MCSR __REG(0x40500018) /* Mic In Status Register */
+#define MCSR_FIFOE (1 << 4) /* FIFO error */
+#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define GSR __REG(0x4050001C) /* Global Status Register */
+#define GSR_CDONE (1 << 19) /* Command Done */
+#define GSR_SDONE (1 << 18) /* Status Done */
+#define GSR_RDCS (1 << 15) /* Read Completion Status */
+#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
+#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
+#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
+#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
+#define GSR_PCR (1 << 8) /* Primary Codec Ready */
+#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
+#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
+#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
+#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
+#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
+#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
+#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
+
+#define CAR __REG(0x40500020) /* CODEC Access Register */
+#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
+
+#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
+#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
+
+#define MOCR __REG(0x40500100) /* Modem Out Control Register */
+#define MOCR_FEIE (1 << 3) /* FIFO Error */
+#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MICR __REG(0x40500108) /* Modem In Control Register */
+#define MICR_FEIE (1 << 3) /* FIFO Error */
+#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MOSR __REG(0x40500110) /* Modem Out Status Register */
+#define MOSR_FIFOE (1 << 4) /* FIFO error */
+#define MOSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MISR __REG(0x40500118) /* Modem In Status Register */
+#define MISR_FIFOE (1 << 4) /* FIFO error */
+#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
+#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
+#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
+#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
index c689c4ea769..f82dcea792d 100644
--- a/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -12,27 +12,29 @@
#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */
#define LCCR4 (0x010) /* LCD Controller Control Register 4 */
#define LCCR5 (0x014) /* LCD Controller Control Register 5 */
-#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
-#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
-#define LCSR (0x038) /* LCD Controller Status Register */
+#define LCSR (0x038) /* LCD Controller Status Register 0 */
+#define LCSR1 (0x034) /* LCD Controller Status Register 1 */
#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */
#define TMEDRGBR (0x040) /* TMED RGB Seed Register */
#define TMEDCR (0x044) /* TMED Control Register */
+#define FBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
+#define FBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
+#define FBR2 (0x028) /* DMA Channel 2 Frame Branch Register */
+#define FBR3 (0x02C) /* DMA Channel 2 Frame Branch Register */
+#define FBR4 (0x030) /* DMA Channel 2 Frame Branch Register */
+#define FBR5 (0x110) /* DMA Channel 2 Frame Branch Register */
+#define FBR6 (0x114) /* DMA Channel 2 Frame Branch Register */
+
+#define OVL1C1 (0x050) /* Overlay 1 Control Register 1 */
+#define OVL1C2 (0x060) /* Overlay 1 Control Register 2 */
+#define OVL2C1 (0x070) /* Overlay 2 Control Register 1 */
+#define OVL2C2 (0x080) /* Overlay 2 Control Register 2 */
+
#define CMDCR (0x100) /* Command Control Register */
#define PRSR (0x104) /* Panel Read Status Register */
-#define LCCR3_1BPP (0 << 24)
-#define LCCR3_2BPP (1 << 24)
-#define LCCR3_4BPP (2 << 24)
-#define LCCR3_8BPP (3 << 24)
-#define LCCR3_16BPP (4 << 24)
-#define LCCR3_18BPP (5 << 24)
-#define LCCR3_18BPP_P (6 << 24)
-#define LCCR3_19BPP (7 << 24)
-#define LCCR3_19BPP_P (1 << 29)
-#define LCCR3_24BPP ((1 << 29) | (1 << 24))
-#define LCCR3_25BPP ((1 << 29) | (2 << 24))
+#define LCCR3_BPP(x) ((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
#define LCCR3_PDFOR_0 (0 << 30)
#define LCCR3_PDFOR_1 (1 << 30)
@@ -42,19 +44,16 @@
#define LCCR4_PAL_FOR_0 (0 << 15)
#define LCCR4_PAL_FOR_1 (1 << 15)
#define LCCR4_PAL_FOR_2 (2 << 15)
+#define LCCR4_PAL_FOR_3 (3 << 15)
#define LCCR4_PAL_FOR_MASK (3 << 15)
#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */
-#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */
-#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */
#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */
-#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */
-#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */
+#define FDADR2 (0x220) /* DMA Channel 2 Frame Descriptor Address Register */
+#define FDADR3 (0x230) /* DMA Channel 3 Frame Descriptor Address Register */
+#define FDADR4 (0x240) /* DMA Channel 4 Frame Descriptor Address Register */
+#define FDADR5 (0x250) /* DMA Channel 5 Frame Descriptor Address Register */
#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */
-#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
@@ -126,9 +125,6 @@
#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD)))
-#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP)))
-
#define LCCR3_ACB Fld (8, 8) /* AC Bias */
#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB)))
@@ -157,8 +153,22 @@
#define LCSR_RD_ST (1 << 11) /* read status */
#define LCSR_CMD_INT (1 << 12) /* command interrupt */
+#define LCSR1_IU(x) (1 << ((x) + 23)) /* Input FIFO underrun */
+#define LCSR1_BS(x) (1 << ((x) + 15)) /* Branch Status */
+#define LCSR1_EOF(x) (1 << ((x) + 7)) /* End of Frame Status */
+#define LCSR1_SOF(x) (1 << ((x) - 1)) /* Start of Frame Status */
+
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
+/* overlay control registers */
+#define OVLxC1_PPL(x) ((((x) - 1) & 0x3ff) << 0) /* Pixels Per Line */
+#define OVLxC1_LPO(x) ((((x) - 1) & 0x3ff) << 10) /* Number of Lines */
+#define OVLxC1_BPP(x) (((x) & 0xf) << 20) /* Bits Per Pixel */
+#define OVLxC1_OEN (1 << 31) /* Enable bit for Overlay */
+#define OVLxC2_XPOS(x) (((x) & 0x3ff) << 0) /* Horizontal Position */
+#define OVLxC2_YPOS(x) (((x) & 0x3ff) << 10) /* Vertical Position */
+#define OVL2C2_PFOR(x) (((x) & 0x7) << 20) /* Pixel Format */
+
/* smartpanel related */
#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */
#define PRSR_A0 (1 << 8) /* Read Data Source */
@@ -177,4 +187,11 @@
#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff))
+
+/* SMART_DELAY() is introduced for software controlled delay primitive which
+ * can be inserted between command sequences, unused command 0x6 is used here
+ * and delay ranges from 0ms ~ 255ms
+ */
+#define SMART_CMD_DELAY (0x6 << 9)
+#define SMART_DELAY(ms) (SMART_CMD_DELAY | ((ms) & 0xff))
#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/include/mach/regs-uart.h
new file mode 100644
index 00000000000..55aeb7fb72f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-uart.h
@@ -0,0 +1,143 @@
+#ifndef __ASM_ARCH_REGS_UART_H
+#define __ASM_ARCH_REGS_UART_H
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART FFRBR
+#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
+#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
+#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
+#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
+#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
+#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
+#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
+#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
+#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
+#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
+#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
+#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART BTRBR
+#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
+#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
+#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
+#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
+#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
+#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
+#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
+#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
+#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
+#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
+#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
+#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART STRBR
+#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
+#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
+#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
+#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
+#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
+#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
+#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
+#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
+#define STMSR __REG(0x40700018) /* Reserved */
+#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
+#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
+#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART HWRBR
+#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
+#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
+#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
+#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
+#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
+#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
+#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
+#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
+#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
+#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
+#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
+#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
+#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
+#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
+#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4)
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
+#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
+#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
+#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
+#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
+
+#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
index b05fc6683c4..af6760a50e1 100644
--- a/arch/arm/mach-pxa/include/mach/timex.h
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -10,6 +10,14 @@
* published by the Free Software Foundation.
*/
+/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
+ * those drivers to at least work, the definition is provided here.
+ *
+ * NOTE: this is no longer accurate when multiple processors and boards
+ * are selected, newer drivers should not depend on this any more. Use
+ * either the clocksource/clockevent or get this at run-time by calling
+ * get_clock_tick_rate() (as defined in generic.c).
+ */
#if defined(CONFIG_PXA25x)
/* PXA250/210 timer base */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 21e3e890af9..f4b029c0395 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,7 +10,7 @@
*/
#include <linux/serial_reg.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
#include <asm/mach-types.h>
#define __REG(x) ((volatile unsigned long *)x)
@@ -35,7 +35,7 @@ static inline void flush(void)
static inline void arch_decomp_setup(void)
{
- if (machine_is_littleton())
+ if (machine_is_littleton() || machine_is_intelmote2())
UART = STUART;
}