diff options
Diffstat (limited to 'arch/arm/mach-pxa/spitz.c')
| -rw-r--r-- | arch/arm/mach-pxa/spitz.c | 144 |
1 files changed, 125 insertions, 19 deletions
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6c6878cd220..2df1b56615b 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = { .resource = spitz_scoop2_resources, }; +#define SPITZ_PWR_SD 0x01 +#define SPITZ_PWR_CF 0x02 + +/* Power control is shared with between one of the CF slots and SD */ +static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) +{ + unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + + if (new_cpr & 0x0007) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) + mdelay(5); + if (device == SPITZ_PWR_CF) + cpr |= 0x0002; + if (device == SPITZ_PWR_SD) + cpr |= 0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + } else { + if (device == SPITZ_PWR_CF) + cpr &= ~0x0002; + if (device == SPITZ_PWR_SD) + cpr &= ~0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) { + mdelay(1); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } + } +} + +static void spitz_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2); + GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO85_nPCE_1_MD); + pxa_gpio_mode(GPIO54_nPCE_2_MD); + pxa_gpio_mode(GPIO104_pSKTSEL_MD); +} + +static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) +{ + /* Only need to override behaviour for slot 0 */ + if (nr == 0) + spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); + else + write_scoop_reg(scoop, SCOOP_CPR, cpr); +} + static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { { .dev = &spitzscoop_device.dev, @@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config spitz_pcmcia_config = { + .devs = &spitz_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = spitz_pcmcia_init, + .power_ctrl = spitz_pcmcia_pwr, +}; + +EXPORT_SYMBOL(spitzscoop_device); +EXPORT_SYMBOL(spitzscoop2_device); + /* * Spitz SSP Device @@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in return 0; } -/* Power control is shared with one of the CF slots so we have a mess */ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); - - if (( 1 << vdd) & p_d->ocr_mask) { - /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */ - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - mdelay(2); - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04); - } else { - /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */ - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04); - - if (!(cpr | 0x02)) { - mdelay(1); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - } - } + if (( 1 << vdd) & p_d->ocr_mask) + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); + else + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); } static int spitz_mci_get_ro(struct device *dev) @@ -288,6 +345,16 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode) reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); } +#ifdef CONFIG_MACH_AKITA +static void akita_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); + else + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); +} +#endif + static struct pxaficp_platform_data spitz_ficp_platform_data = { .transceiver_cap = IR_SIRMODE | IR_OFF, .transceiver_mode = spitz_irda_transceiver_mode, @@ -351,8 +418,8 @@ static void __init common_init(void) static void __init spitz_init(void) { - scoop_num = 2; - scoop_devs = &spitz_pcmcia_scoop[0]; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; common_init(); @@ -360,6 +427,32 @@ static void __init spitz_init(void) platform_device_register(&spitzscoop2_device); } +#ifdef CONFIG_MACH_AKITA +/* + * Akita IO Expander + */ +struct platform_device akitaioexp_device = { + .name = "akita-ioexp", + .id = -1, +}; + +static void __init akita_init(void) +{ + spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; + + /* We just pretend the second element of the array doesn't exist */ + spitz_pcmcia_config.num_devs = 1; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity; + + platform_device_register(&akitaioexp_device); + + spitzscoop_device.dev.parent = &akitaioexp_device.dev; + common_init(); +} +#endif + + static void __init fixup_spitz(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { @@ -395,3 +488,16 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .timer = &pxa_timer, MACHINE_END #endif + +#ifdef CONFIG_MACH_AKITA +MACHINE_START(AKITA, "SHARP Akita") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_spitz, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = akita_init, + .timer = &pxa_timer, +MACHINE_END +#endif |