diff options
Diffstat (limited to 'arch/arm/mach-pxa')
| -rw-r--r-- | arch/arm/mach-pxa/corgi_lcd.c | 290 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/corgi_ssp.c | 276 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/corgi.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/spitz.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/sharpsl_pm.c | 17 |
5 files changed, 2 insertions, 583 deletions
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c deleted file mode 100644 index 311baf149b0..00000000000 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/corgi_lcd.c - * - * Corgi/Spitz LCD Specific Code - * - * Copyright (C) 2005 Richard Purdie - * - * Connectivity: - * Corgi - LCD to ATI Imageon w100 (Wallaby) - * Spitz - LCD to PXA Framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/string.h> -#include <mach/akita.h> -#include <mach/corgi.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/sharpsl.h> -#include <mach/spitz.h> -#include <asm/hardware/scoop.h> -#include <asm/mach/sharpsl_param.h> -#include "generic.h" - -/* Register Addresses */ -#define RESCTL_ADRS 0x00 -#define PHACTRL_ADRS 0x01 -#define DUTYCTRL_ADRS 0x02 -#define POWERREG0_ADRS 0x03 -#define POWERREG1_ADRS 0x04 -#define GPOR3_ADRS 0x05 -#define PICTRL_ADRS 0x06 -#define POLCTRL_ADRS 0x07 - -/* Register Bit Definitions */ -#define RESCTL_QVGA 0x01 -#define RESCTL_VGA 0x00 - -#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ -#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ -#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ - -#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ -#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ -#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ - -#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ -#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ -#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ -#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ -#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ - -#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ -#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ -#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ - -#define PICTRL_INIT_STATE 0x01 -#define PICTRL_INIOFF 0x02 -#define PICTRL_POWER_DOWN 0x04 -#define PICTRL_COM_SIGNAL_OFF 0x08 -#define PICTRL_DAC_SIGNAL_OFF 0x10 - -#define POLCTRL_SYNC_POL_FALL 0x01 -#define POLCTRL_EN_POL_FALL 0x02 -#define POLCTRL_DATA_POL_FALL 0x04 -#define POLCTRL_SYNC_ACT_H 0x08 -#define POLCTRL_EN_ACT_L 0x10 - -#define POLCTRL_SYNC_POL_RISE 0x00 -#define POLCTRL_EN_POL_RISE 0x00 -#define POLCTRL_DATA_POL_RISE 0x00 -#define POLCTRL_SYNC_ACT_L 0x00 -#define POLCTRL_EN_ACT_H 0x00 - -#define PHACTRL_PHASE_MANUAL 0x01 -#define DEFAULT_PHAD_QVGA (9) -#define DEFAULT_COMADJ (125) - -/* - * This is only a psuedo I2C interface. We can't use the standard kernel - * routines as the interface is write only. We just assume the data is acked... - */ -static void lcdtg_ssp_i2c_send(u8 data) -{ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); - udelay(10); -} - -static void lcdtg_i2c_send_bit(u8 data) -{ - lcdtg_ssp_i2c_send(data); - lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(data); -} - -static void lcdtg_i2c_send_start(u8 base) -{ - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base); -} - -static void lcdtg_i2c_send_stop(u8 base) -{ - lcdtg_ssp_i2c_send(base); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); -} - -static void lcdtg_i2c_send_byte(u8 base, u8 data) -{ - int i; - for (i = 0; i < 8; i++) { - if (data & 0x80) - lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); - else - lcdtg_i2c_send_bit(base); - data <<= 1; - } -} - -static void lcdtg_i2c_wait_ack(u8 base) -{ - lcdtg_i2c_send_bit(base); -} - -static void lcdtg_set_common_voltage(u8 base_data, u8 data) -{ - /* Set Common Voltage to M62332FP via I2C */ - lcdtg_i2c_send_start(base_data); - lcdtg_i2c_send_byte(base_data, 0x9c); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, 0x00); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, data); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_stop(base_data); -} - -/* Set Phase Adjust */ -static void lcdtg_set_phadadj(int mode) -{ - int adj; - switch(mode) { - case 480: - case 640: - /* Setting for VGA */ - adj = sharpsl_param.phadadj; - if (adj < 0) { - adj = PHACTRL_PHASE_MANUAL; - } else { - adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; - } - break; - case 240: - case 320: - default: - /* Setting for QVGA */ - adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; - break; - } - - corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); -} - -static int lcd_inited; - -void corgi_lcdtg_hw_init(int mode) -{ - if (!lcd_inited) { - int comadj; - - /* Initialize Internal Logic & Port */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE - | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); - - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - /* VDD(+8V), SVSS(-4V) ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - mdelay(3); - - /* DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* INIB = H, INI = L */ - /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); - - /* Set Common Voltage */ - comadj = sharpsl_param.comadj; - if (comadj < 0) - comadj = DEFAULT_COMADJ; - lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); - - /* VCC5 ON, DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | - POWER0_COM_OFF | POWER0_VCC5_ON); - - /* GVSS(-8V) ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - mdelay(2); - - /* COM SIGNAL ON (PICTL[3] = L) */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); - - /* COM ON, DAC ON, VCC5_ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_ON | POWER0_VCC5_ON); - - /* VW ON, GVSS ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* Signals output enable */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); - - /* Set Phase Adjust */ - lcdtg_set_phadadj(mode); - - /* Initialize for Input Signals from ATI */ - corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE - | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); - udelay(1000); - - lcd_inited=1; - } else { - lcdtg_set_phadadj(mode); - } - - switch(mode) { - case 480: - case 640: - /* Set Lcd Resolution (VGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); - break; - case 240: - case 320: - default: - /* Set Lcd Resolution (QVGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); - break; - } -} - -void corgi_lcdtg_suspend(void) -{ - /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ - mdelay(34); - - /* (1)VW OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* (2)COM OFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); - - /* (3)Set Common Voltage Bias 0V */ - lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); - - /* (4)GVSS OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - - /* (5)VCC5 OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (6)Set PDWN, INIOFF, DACOFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | - PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); - - /* (7)DAC OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (8)VDD OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - lcd_inited = 0; -} - diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c deleted file mode 100644 index 8e2f2215c4b..00000000000 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * SSP control code for Sharp Corgi devices - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <mach/ssp.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> -#include <mach/regs-ssp.h> -#include "sharpsl.h" - -static DEFINE_SPINLOCK(corgi_ssp_lock); -static struct ssp_dev corgi_ssp_dev; -static struct ssp_state corgi_ssp_state; -static struct corgissp_machinfo *ssp_machinfo; - -/* - * There are three devices connected to the SSP interface: - * 1. A touchscreen controller (TI ADS7846 compatible) - * 2. An LCD controller (with some Backlight functionality) - * 3. A battery monitoring IC (Maxim MAX1111) - * - * Each device uses a different speed/mode of communication. - * - * The touchscreen is very sensitive and the most frequently used - * so the port is left configured for this. - * - * Devices are selected using Chip Selects on GPIOs. - */ - -/* - * ADS7846 Routines - */ -unsigned long corgi_ssp_ads7846_putget(ulong data) -{ - unsigned long flag; - u32 ret = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, &ret); - - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return ret; -} - -/* - * NOTE: These functions should always be called in interrupt context - * and use the _lock and _unlock functions. They are very time sensitive. - */ -void corgi_ssp_ads7846_lock(void) -{ - spin_lock(&corgi_ssp_lock); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); -} - -void corgi_ssp_ads7846_unlock(void) -{ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock(&corgi_ssp_lock); -} - -void corgi_ssp_ads7846_put(ulong data) -{ - ssp_write_word(&corgi_ssp_dev,data); -} - -unsigned long corgi_ssp_ads7846_get(void) -{ - u32 ret = 0; - ssp_read_word(&corgi_ssp_dev, &ret); - return ret; -} - -EXPORT_SYMBOL(corgi_ssp_ads7846_putget); -EXPORT_SYMBOL(corgi_ssp_ads7846_lock); -EXPORT_SYMBOL(corgi_ssp_ads7846_unlock); -EXPORT_SYMBOL(corgi_ssp_ads7846_put); -EXPORT_SYMBOL(corgi_ssp_ads7846_get); - - -/* - * LCD/Backlight Routines - */ -unsigned long corgi_ssp_dac_put(ulong data) -{ - unsigned long flag, sscr1 = SSCR1_SPH; - u32 tmp; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - - if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) - sscr1 = 0; - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); - ssp_enable(&corgi_ssp_dev); - - if (ssp_machinfo->cs_lcdcon >= 0) - GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - ssp_write_word(&corgi_ssp_dev,data); - /* Read null data back from device to prevent SSP overflow */ - ssp_read_word(&corgi_ssp_dev, &tmp); - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return 0; -} - -void corgi_ssp_lcdtg_send(u8 adrs, u8 data) -{ - corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f)); -} - -void corgi_ssp_blduty_set(int duty) -{ - corgi_ssp_lcdtg_send(0x02,duty); -} - -EXPORT_SYMBOL(corgi_ssp_lcdtg_send); -EXPORT_SYMBOL(corgi_ssp_blduty_set); - -/* - * Max1111 Routines - */ -int corgi_ssp_max1111_get(ulong data) -{ - unsigned long flag; - long voltage = 0, voltage1 = 0, voltage2 = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_max1111 >= 0) - GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); - ssp_enable(&corgi_ssp_dev); - - udelay(1); - - /* TB1/RB1 */ - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */ - - /* TB12/RB2 */ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); - - /* TB13/RB3*/ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - if (voltage1 & 0xc0 || voltage2 & 0x3f) - voltage = -1; - else - voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03); - - return voltage; -} - -EXPORT_SYMBOL(corgi_ssp_max1111_get); - -/* - * Support Routines - */ - -void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) -{ - ssp_machinfo = machinfo; -} - -static int __init corgi_ssp_probe(struct platform_device *dev) -{ - int ret; - - /* Chip Select - Disable All */ - if (ssp_machinfo->cs_lcdcon >= 0) - pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_max1111 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_ads7846 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); - - ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); - - if (ret) - printk(KERN_ERR "Unable to register SSP handler!\n"); - else { - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - } - - return ret; -} - -static int corgi_ssp_remove(struct platform_device *dev) -{ - ssp_exit(&corgi_ssp_dev); - return 0; -} - -static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) -{ - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - - return 0; -} - -static int corgi_ssp_resume(struct platform_device *dev) -{ - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - - return 0; -} - -static struct platform_driver corgissp_driver = { - .probe = corgi_ssp_probe, - .remove = corgi_ssp_remove, - .suspend = corgi_ssp_suspend, - .resume = corgi_ssp_resume, - .driver = { - .name = "corgi-ssp", - }, -}; - -int __init corgi_ssp_init(void) -{ - return platform_driver_register(&corgissp_driver); -} - -arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index bf856503baf..7f4de3df5af 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -103,7 +103,6 @@ * Shared data structures */ extern struct platform_device corgiscoop_device; -extern struct platform_device corgissp_device; #endif /* __ASM_ARCH_CORGI_H */ diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index bd14365f7ed..d2fc22df0d7 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -154,5 +154,4 @@ */ extern struct platform_device spitzscoop_device; extern struct platform_device spitzscoop2_device; -extern struct platform_device spitzssp_device; extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 9427d808839..15c2f1a8623 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -116,33 +116,20 @@ struct battery_thresh spitz_battery_levels_noac[] = { { 0, 0}, }; -/* MAX1111 Commands */ -#define MAXCTRL_PD0 1u << 0 -#define MAXCTRL_PD1 1u << 1 -#define MAXCTRL_SGL 1u << 2 -#define MAXCTRL_UNI 1u << 3 -#define MAXCTRL_SEL_SH 4 -#define MAXCTRL_STR 1u << 7 - /* * Read MAX1111 ADC */ +extern int max1111_read_channel(int); + int sharpsl_pm_pxa_read_max1111(int channel) { if (machine_is_tosa()) // Ugly, better move this function into another module return 0; -#ifdef CONFIG_SENSORS_MAX1111 - extern int max1111_read_channel(int); - /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ return max1111_read_channel(channel >> 1); -#else - return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 - | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); -#endif } void sharpsl_pm_pxa_init(void) |