diff options
Diffstat (limited to 'arch/arm/mach-pxa')
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 9 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/corgi.c | 48 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/corgi_lcd.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pm.c | 16 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/poodle.c | 32 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/spitz.c | 95 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/time.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/tosa.c | 306 |
9 files changed, 476 insertions, 40 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e5f69bb5ac..b380a438e68 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -27,7 +27,8 @@ config PXA_SHARPSL Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), - SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. + SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) + handheld computer. endchoice @@ -37,7 +38,7 @@ choice prompt "Select target Sharp Zaurus device range" config PXA_SHARPSL_25x - bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)" select PXA25x config PXA_SHARPSL_27x @@ -80,6 +81,10 @@ config MACH_BORZOI depends PXA_SHARPSL_27x select PXA_SHARP_Cxx00 +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends PXA_SHARPSL + config PXA25x bool help diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f609a0f232c..8bc72d07cea 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o +obj-$(CONFIG_MACH_TOSA) += tosa.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index eb5f6d744a4..100fb31b515 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -62,6 +62,37 @@ static struct scoop_config corgi_scoop_setup = { .io_out = CORGI_SCOOP_IO_OUT, }; +struct platform_device corgiscoop_device = { + .name = "sharp-scoop", + .id = -1, + .dev = { + .platform_data = &corgi_scoop_setup, + }, + .num_resources = ARRAY_SIZE(corgi_scoop_resources), + .resource = corgi_scoop_resources, +}; + +static void corgi_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { { .dev = &corgiscoop_device.dev, @@ -71,16 +102,14 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { }, }; -struct platform_device corgiscoop_device = { - .name = "sharp-scoop", - .id = -1, - .dev = { - .platform_data = &corgi_scoop_setup, - }, - .num_resources = ARRAY_SIZE(corgi_scoop_resources), - .resource = corgi_scoop_resources, +static struct scoop_pcmcia_config corgi_pcmcia_config = { + .devs = &corgi_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = corgi_pcmcia_init, }; +EXPORT_SYMBOL(corgiscoop_device); + /* * Corgi SSP Device @@ -294,8 +323,7 @@ static void __init corgi_init(void) pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); - scoop_num = 1; - scoop_devs = &corgi_pcmcia_scoop[0]; + platform_scoop_config = &corgi_pcmcia_config; platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 54162ba9541..698eb06545c 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/string.h> #include <asm/arch/akita.h> #include <asm/arch/corgi.h> #include <asm/arch/hardware.h> diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index ac4dd433616..f74b9af112d 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -12,6 +12,7 @@ */ #include <linux/config.h> #include <linux/init.h> +#include <linux/module.h> #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> @@ -19,6 +20,7 @@ #include <asm/hardware.h> #include <asm/memory.h> #include <asm/system.h> +#include <asm/arch/pm.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/lubbock.h> #include <asm/mach/time.h> @@ -72,7 +74,7 @@ enum { SLEEP_SAVE_START = 0, }; -static int pxa_pm_enter(suspend_state_t state) +int pxa_pm_enter(suspend_state_t state) { unsigned long sleep_save[SLEEP_SAVE_SIZE]; unsigned long checksum = 0; @@ -191,6 +193,8 @@ static int pxa_pm_enter(suspend_state_t state) return 0; } +EXPORT_SYMBOL_GPL(pxa_pm_enter); + unsigned long sleep_phys_sp(void *sp) { return virt_to_phys(sp); @@ -199,21 +203,25 @@ unsigned long sleep_phys_sp(void *sp) /* * Called after processes are frozen, but before we shut down devices. */ -static int pxa_pm_prepare(suspend_state_t state) +int pxa_pm_prepare(suspend_state_t state) { extern int pxa_cpu_pm_prepare(suspend_state_t state); return pxa_cpu_pm_prepare(state); } +EXPORT_SYMBOL_GPL(pxa_pm_prepare); + /* * Called after devices are re-setup, but before processes are thawed. */ -static int pxa_pm_finish(suspend_state_t state) +int pxa_pm_finish(suspend_state_t state) { return 0; } +EXPORT_SYMBOL_GPL(pxa_pm_finish); + /* * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. */ @@ -230,4 +238,4 @@ static int __init pxa_pm_init(void) return 0; } -late_initcall(pxa_pm_init); +device_initcall(pxa_pm_init); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index ad6a13f95a6..eef3de26ad3 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; +static void poodle_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { { .dev = &poodle_scoop_device.dev, @@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config poodle_pcmcia_config = { + .devs = &poodle_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = poodle_pcmcia_init, +}; + +EXPORT_SYMBOL(poodle_scoop_device); + /* LoCoMo device */ static struct resource locomo_resources[] = { @@ -268,8 +297,7 @@ static void __init poodle_init(void) pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); - scoop_num = 1; - scoop_devs = &poodle_pcmcia_scoop[0]; + platform_scoop_config = &poodle_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6c6878cd220..4e9a699ee42 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = { .resource = spitz_scoop2_resources, }; +#define SPITZ_PWR_SD 0x01 +#define SPITZ_PWR_CF 0x02 + +/* Power control is shared with between one of the CF slots and SD */ +static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) +{ + unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + + if (new_cpr & 0x0007) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) + mdelay(5); + if (device == SPITZ_PWR_CF) + cpr |= 0x0002; + if (device == SPITZ_PWR_SD) + cpr |= 0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + } else { + if (device == SPITZ_PWR_CF) + cpr &= ~0x0002; + if (device == SPITZ_PWR_SD) + cpr &= ~0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) { + mdelay(1); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } + } +} + +static void spitz_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2); + GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO85_nPCE_1_MD); + pxa_gpio_mode(GPIO54_nPCE_2_MD); + pxa_gpio_mode(GPIO104_pSKTSEL_MD); +} + +static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) +{ + /* Only need to override behaviour for slot 0 */ + if (nr == 0) + spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); + else + write_scoop_reg(scoop, SCOOP_CPR, cpr); +} + static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { { .dev = &spitzscoop_device.dev, @@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config spitz_pcmcia_config = { + .devs = &spitz_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = spitz_pcmcia_init, + .power_ctrl = spitz_pcmcia_pwr, +}; + +EXPORT_SYMBOL(spitzscoop_device); +EXPORT_SYMBOL(spitzscoop2_device); + /* * Spitz SSP Device @@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in return 0; } -/* Power control is shared with one of the CF slots so we have a mess */ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); - - if (( 1 << vdd) & p_d->ocr_mask) { - /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */ - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - mdelay(2); - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04); - } else { - /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */ - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04); - - if (!(cpr | 0x02)) { - mdelay(1); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - } - } + if (( 1 << vdd) & p_d->ocr_mask) + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); + else + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); } static int spitz_mci_get_ro(struct device *dev) @@ -351,8 +408,8 @@ static void __init common_init(void) static void __init spitz_init(void) { - scoop_num = 2; - scoop_devs = &spitz_pcmcia_scoop[0]; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; common_init(); diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 7dad3f1465e..b9b2057349e 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -132,11 +132,13 @@ static void __init pxa_timer_init(void) tv.tv_sec = pxa_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &pxa_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c new file mode 100644 index 00000000000..c312054dfb8 --- /dev/null +++ b/arch/arm/mach-pxa/tosa.c @@ -0,0 +1,306 @@ +/* + * Support for Sharp SL-C6000x PDAs + * Model: (Tosa) + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/mmc/host.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/arch/irda.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/irq.h> +#include <asm/arch/tosa.h> + +#include <asm/hardware/scoop.h> +#include <asm/mach/sharpsl_param.h> + +#include "generic.h" + + +/* + * SCOOP Device + */ +static struct resource tosa_scoop_resources[] = { + [0] = { + .start = TOSA_CF_PHYS, + .end = TOSA_CF_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_setup = { + .io_dir = TOSA_SCOOP_IO_DIR, + .io_out = TOSA_SCOOP_IO_OUT, + +}; + +struct platform_device tosascoop_device = { + .name = "sharp-scoop", + .id = 0, + .dev = { + .platform_data = &tosa_scoop_setup, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_resources), + .resource = tosa_scoop_resources, +}; + + +/* + * SCOOP Device Jacket + */ +static struct resource tosa_scoop_jc_resources[] = { + [0] = { + .start = TOSA_SCOOP_PHYS + 0x40, + .end = TOSA_SCOOP_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_jc_setup = { + .io_dir = TOSA_SCOOP_JC_IO_DIR, + .io_out = TOSA_SCOOP_JC_IO_OUT, +}; + +struct platform_device tosascoop_jc_device = { + .name = "sharp-scoop", + .id = 1, + .dev = { + .platform_data = &tosa_scoop_jc_setup, + .parent = &tosascoop_device.dev, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources), + .resource = tosa_scoop_jc_resources, +}; + +/* + * PCMCIA + */ +static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { +{ + .dev = &tosascoop_device.dev, + .irq = TOSA_IRQ_GPIO_CF_IRQ, + .cd_irq = TOSA_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +},{ + .dev = &tosascoop_jc_device.dev, + .irq = TOSA_IRQ_GPIO_JC_CF_IRQ, + .cd_irq = -1, +}, +}; + +static void tosa_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + +static struct scoop_pcmcia_config tosa_pcmcia_config = { + .devs = &tosa_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = tosa_pcmcia_init, +}; + +/* + * USB Device Controller + */ +static void tosa_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + } +} + +static int tosa_udc_is_connected(void) +{ + return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0); +} + + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + .udc_command = tosa_udc_command, + .udc_is_connected = tosa_udc_is_connected, +}; + +/* + * MMC/SD Device + */ +static struct pxamci_platform_data tosa_mci_platform_data; + +static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); + + tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT, + "MMC/SD card detect", data); + if (err) { + printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void tosa_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) { + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } else { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } +} + +static int tosa_mci_get_ro(struct device *dev) +{ + return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); +} + +static void tosa_mci_exit(struct device *dev, void *data) +{ + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data tosa_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = tosa_mci_init, + .get_ro = tosa_mci_get_ro, + .setpower = tosa_mci_setpower, + .exit = tosa_mci_exit, +}; + +/* + * Irda + */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); + pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); + } else { + pxa_gpio_mode(GPIO47_STTXD_MD); + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + } +} + +static struct pxaficp_platform_data tosa_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = tosa_irda_transceiver_mode, +}; + +/* + * Tosa Keyboard + */ +static struct platform_device tosakbd_device = { + .name = "tosa-keyboard", + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &tosascoop_device, + &tosascoop_jc_device, + &tosakbd_device, +}; + +static void __init tosa_init(void) +{ + pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); + + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x00000000; + PGSR1 = 0x00FF0002; + PGSR2 = 0x00014000; + PCFR |= PCFR_OPDE; + + /* enable batt_fault */ + PMCR = 0x01; + + pxa_set_mci_info(&tosa_mci_platform_data); + pxa_set_udc_info(&udc_info); + pxa_set_ficp_info(&tosa_ficp_platform_data); + platform_scoop_config = &tosa_pcmcia_config; + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init fixup_tosa(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + sharpsl_save_param(); + mi->nr_banks=1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); +} + +MACHINE_START(TOSA, "SHARP Tosa") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_tosa, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = tosa_init, + .timer = &pxa_timer, +MACHINE_END |