diff options
Diffstat (limited to 'arch/arm/mach-s3c2410')
31 files changed, 1768 insertions, 308 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index bbd138be6a7..df37594c30f 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,6 +2,13 @@ if ARCH_S3C2410 menu "S3C24XX Implementations" +config MACH_AML_M5900 + bool "AML M5900 Series" + select CPU_S3C2410 + help + Say Y here if you are using the American Microsystems M5900 Series + <http://www.amltd.com> + config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select CPU_S3C2440 @@ -126,6 +133,12 @@ config MACH_NEXCODER_2440 help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board +config MACH_VSTMS + bool "VMSTMS" + select CPU_S3C2412 + help + Say Y here if you are using an VSTMS board + endmenu config S3C2410_CLOCK @@ -133,10 +146,24 @@ config S3C2410_CLOCK help Clock code for the S3C2410, and similar processors +config S3C2410_PM + bool + depends on CONFIG_PM + help + Power Management code common to S3C2410 and better + +config CPU_S3C2410_DMA + bool + depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 + help + DMA device selection for S3C2410 and compatible CPUs + config CPU_S3C2410 bool depends on ARCH_S3C2410 select S3C2410_CLOCK + select S3C2410_PM help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -149,6 +176,13 @@ config CPU_S3C2412_ONLY !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412 default y if CPU_S3C2412 +config S3C2412_PM + bool + default y if PM + depends on CPU_S3C2412 + help + Internal config node to apply S3C2412 power management + config CPU_S3C2412 bool depends on ARCH_S3C2410 @@ -165,6 +199,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select S3C2410_CLOCK + select S3C2410_PM select CPU_S3C244X help Support for S3C2440 Samsung Mobile CPU based systems. @@ -173,6 +208,7 @@ config CPU_S3C2442 bool depends on ARCH_S3C2420 select S3C2410_CLOCK + select S3C2410_PM select CPU_S3C244X help Support for S3C2442 Samsung Mobile CPU based systems. @@ -256,7 +292,7 @@ config S3C2410_PM_CHECK_CHUNKSIZE config PM_SIMTEC bool - depends on PM && (ARCH_BAST || MACH_VR1000) + depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900) default y config S3C2410_LOWLEVEL_UART_PORT diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 0eadec91621..d66013365b6 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -9,6 +9,8 @@ obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o obj-m := obj-n := obj- := +obj-dma-y := +obj-dma-n := # DMA obj-$(CONFIG_S3C2410_DMA) += dma.o @@ -20,6 +22,10 @@ obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o + +obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o +obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o # Power Management support @@ -30,6 +36,9 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o +obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o + +obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o # # S3C244X support @@ -47,6 +56,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o +obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o # S3C2442 support @@ -57,8 +67,13 @@ obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +# merge in dma objects + +obj-y += $(obj-dma-y) + # machine specific support +obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o @@ -71,5 +86,6 @@ obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o +obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index def4441d244..440e9aa0211 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -18,10 +18,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Modifications: - * 08-Jan-2003 BJD Moved from central IRQ code - * 21-Aug-2005 BJD Fixed missing code and compile errors */ diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 1c3c6adae6c..9d4899eddf1 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -124,6 +124,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { /* a newer version of the s3c2412 */ + .idcode = 0x32412003, + .idmask = 0xffffffff, + .map_io = s3c2412_map_io, + .init_clocks = s3c2412_init_clocks, + .init_uarts = s3c2412_init_uarts, + .init = s3c2412_init, + .name = name_s3c2412, + }, { .idcode = 0x0, /* S3C2400 doesn't have an idcode */ .idmask = 0xffffffff, diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h index 726e2eaf879..14fb0bade71 100644 --- a/arch/arm/mach-s3c2410/devs.h +++ b/arch/arm/mach-s3c2410/devs.h @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 18-Aug-2004 BJD Created initial version - * 27-Aug-2004 BJD Added timers 0 through 3 - * 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index cc92a7b2db8..d264bbbd8be 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -1,35 +1,16 @@ -/* linux/arch/arm/mach-bast/dma.c +/* linux/arch/arm/mach-s3c2410/dma.c * - * (c) 2003-2005 Simtec Electronics + * (c) 2003-2005,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 DMA core * - * http://www.simtec.co.uk/products/EB2410ITX/ + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 27-Feb-2005 BJD Added kmem cache for dma descriptors - * 18-Nov-2004 BJD Removed error for loading onto stopped channel - * 10-Nov-2004 BJD Ensure all external symbols exported for modules - * 10-Nov-2004 BJD Use sys_device and sysdev_class for power management - * 08-Aug-2004 BJD Apply rmk's suggestions - * 21-Jul-2004 BJD Ported to linux 2.6 - * 12-Jul-2004 BJD Finished re-write and change of API - * 06-Jul-2004 BJD Rewrote dma code to try and cope with various problems - * 23-May-2003 BJD Created file - * 19-Aug-2003 BJD Cleanup, header fix, added URL - * - * This file is based on the Sangwook Lee/Samsung patches, re-written due - * to various ommisions from the code (such as flexible dma configuration) - * for use with the BAST system board. - * - * The re-write is pretty much complete, and should be good enough for any - * possible DMA function - */ +*/ #ifdef CONFIG_S3C2410_DMA_DEBUG @@ -55,10 +36,14 @@ #include <asm/mach/dma.h> #include <asm/arch/map.h> +#include "dma.h" + /* io map for dma */ static void __iomem *dma_base; static kmem_cache_t *dma_kmem; +struct s3c24xx_dma_selection dma_sel; + /* dma channel state information */ struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; @@ -79,7 +64,6 @@ dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); writel(val, dma_regaddr(chan, reg)); } - #endif #define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) @@ -151,12 +135,20 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) #define dbg_showchan(chan) do { } while(0) #endif /* CONFIG_S3C2410_DMA_DEBUG */ -#define check_channel(chan) \ - do { if ((chan) >= S3C2410_DMA_CHANNELS) { \ - printk(KERN_ERR "%s: invalid channel %d\n", __FUNCTION__, (chan)); \ - return -EINVAL; \ - } } while(0) +static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; +/* lookup_dma_channel + * + * change the dma channel number given into a real dma channel id +*/ + +static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) +{ + if (channel & DMACH_LOW_LEVEL) + return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; + else + return dma_chan_map[channel]; +} /* s3c2410_dma_stats_timeout * @@ -321,8 +313,10 @@ static inline void s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, enum s3c2410_dma_buffresult result) { +#if 0 pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", chan->callback_fn, buf, buf->id, buf->size, result); +#endif if (chan->callback_fn != NULL) { (chan->callback_fn)(chan, buf->id, buf->size, result); @@ -439,7 +433,6 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) return 0; } - /* s3c2410_dma_enqueue * * queue an given buffer for dma transfer. @@ -460,11 +453,12 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) int s3c2410_dma_enqueue(unsigned int channel, void *id, dma_addr_t data, int size) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); struct s3c2410_dma_buf *buf; unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int)data, size); @@ -562,8 +556,10 @@ s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) static inline void s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) { +#if 0 pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", chan->number, chan->load_state); +#endif switch (chan->load_state) { case S3C2410_DMALOAD_NONE: @@ -718,7 +714,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) if (chan->load_state == S3C2410_DMALOAD_NONE) { pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", chan->number, jiffies); - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_STOP); } } @@ -726,37 +723,34 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) return IRQ_HANDLED; } +static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); + /* s3c2410_request_dma * * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client, +int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *client, void *dev) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan; unsigned long flags; int err; pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", channel, client->name, dev); - check_channel(channel); - local_irq_save(flags); - dbg_showchan(chan); - - if (chan->in_use) { - if (client != chan->client) { - printk(KERN_ERR "dma%d: already in use\n", channel); - local_irq_restore(flags); - return -EBUSY; - } else { - printk(KERN_ERR "dma%d: client already has channel\n", channel); - } + chan = s3c2410_dma_map_channel(channel); + if (chan == NULL) { + local_irq_restore(flags); + return -EBUSY; } + dbg_showchan(chan); + chan->client = client; chan->in_use = 1; @@ -809,14 +803,14 @@ EXPORT_SYMBOL(s3c2410_dma_request); int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; local_irq_save(flags); - if (chan->client != client) { printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", channel, chan->client, client); @@ -837,8 +831,12 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) if (chan->irq_claimed) free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + if (!(channel & DMACH_LOW_LEVEL)) + dma_chan_map[channel] = NULL; + local_irq_restore(flags); return 0; @@ -848,8 +846,8 @@ EXPORT_SYMBOL(s3c2410_dma_free); static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) { - unsigned long tmp; unsigned long flags; + unsigned long tmp; pr_debug("%s:\n", __FUNCTION__); @@ -997,9 +995,10 @@ s3c2410_dma_started(struct s3c2410_dma_chan *chan) int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; switch (op) { case S3C2410_DMAOP_START: @@ -1046,12 +1045,19 @@ int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", __FUNCTION__, channel, xferunit, dcon); - check_channel(channel); + if (chan == NULL) + return -EINVAL; + + printk("Initial dcon is %08x\n", dcon); + + dcon |= chan->dcon & dma_sel.dcon_mask; + + printk("New dcon is %08x\n", dcon); switch (xferunit) { case 1: @@ -1086,9 +1092,10 @@ EXPORT_SYMBOL(s3c2410_dma_config); int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); @@ -1106,9 +1113,10 @@ EXPORT_SYMBOL(s3c2410_dma_setflags); int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1121,9 +1129,10 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn); int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1153,9 +1162,10 @@ int s3c2410_dma_devconfig(int channel, int hwcfg, unsigned long devaddr) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", __FUNCTION__, (int)source, hwcfg, devaddr); @@ -1200,9 +1210,10 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) { - struct s3c2410_dma_chan *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; if (src != NULL) *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); @@ -1252,7 +1263,7 @@ static int s3c2410_dma_resume(struct sys_device *dev) #define s3c2410_dma_resume NULL #endif /* CONFIG_PM */ -static struct sysdev_class dma_sysclass = { +struct sysdev_class dma_sysclass = { set_kset_name("s3c24xx-dma"), .suspend = s3c2410_dma_suspend, .resume = s3c2410_dma_resume, @@ -1265,7 +1276,6 @@ static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f) memset(p, 0, sizeof(struct s3c2410_dma_buf)); } - /* initialisation code */ static int __init s3c2410_init_dma(void) @@ -1274,7 +1284,7 @@ static int __init s3c2410_init_dma(void) int channel; int ret; - printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n"); + printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); dma_base = ioremap(S3C24XX_PA_DMA, 0x200); if (dma_base == NULL) { @@ -1282,6 +1292,8 @@ static int __init s3c2410_init_dma(void) return -ENOMEM; } + printk("Registering sysclass\n"); + ret = sysdev_class_register(&dma_sysclass); if (ret != 0) { printk(KERN_ERR "dma sysclass registration failed\n"); @@ -1335,4 +1347,95 @@ static int __init s3c2410_init_dma(void) return ret; } -__initcall(s3c2410_init_dma); +core_initcall(s3c2410_init_dma); + +static inline int is_channel_valid(unsigned int channel) +{ + return (channel & DMA_CH_VALID); +} + +/* s3c2410_dma_map_channel() + * + * turn the virtual channel number into a real, and un-used hardware + * channel. + * + * currently this code uses first-free channel from the specified harware + * map, not taking into account anything that the board setup code may + * have to say about the likely peripheral set to be in use. +*/ + +struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) +{ + struct s3c24xx_dma_map *ch_map; + struct s3c2410_dma_chan *dmach; + int ch; + + if (dma_sel.map == NULL || channel > dma_sel.map_size) + return NULL; + + ch_map = dma_sel.map + channel; + + for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) { + if (!is_channel_valid(ch_map->channels[ch])) + continue; + + if (s3c2410_chans[ch].in_use == 0) { + printk("mapped channel %d to %d\n", channel, ch); + break; + } + } + + if (ch >= S3C2410_DMA_CHANNELS) + return NULL; + + /* update our channel mapping */ + + dmach = &s3c2410_chans[ch]; + dma_chan_map[channel] = dmach; + + /* select the channel */ + + (dma_sel.select)(dmach, ch_map); + + return dmach; +} + +static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch) +{ + /* show the channel configuration */ + + printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name, + (is_channel_valid(map->channels[0]) ? '0' : '-'), + (is_channel_valid(map->channels[1]) ? '1' : '-'), + (is_channel_valid(map->channels[2]) ? '2' : '-'), + (is_channel_valid(map->channels[3]) ? '3' : '-')); +} + +static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) +{ + if (1) + s3c24xx_dma_show_ch(map, ch); + + return 0; +} + +int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) +{ + struct s3c24xx_dma_map *nmap; + size_t map_sz = sizeof(*nmap) * sel->map_size; + int ptr; + + nmap = kmalloc(map_sz, GFP_KERNEL); + if (nmap == NULL) + return -ENOMEM; + + memcpy(nmap, sel->map, map_sz); + memcpy(&dma_sel, sel, sizeof(*sel)); + + dma_sel.map = nmap; + + for (ptr = 0; ptr < sel->map_size; ptr++) + s3c24xx_dma_check_entry(nmap+ptr, ptr); + + return 0; +} diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h new file mode 100644 index 00000000000..0ebfe0aab80 --- /dev/null +++ b/arch/arm/mach-s3c2410/dma.h @@ -0,0 +1,45 @@ +/* arch/arm/mach-s3c2410/dma.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct sysdev_class dma_sysclass; +extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; + +#define DMA_CH_VALID (1<<31) + +struct s3c24xx_dma_addr { + unsigned long from; + unsigned long to; +}; + +/* struct s3c24xx_dma_map + * + * this holds the mapping information for the channel selected + * to be connected to the specified device +*/ + +struct s3c24xx_dma_map { + const char *name; + struct s3c24xx_dma_addr hw_addr; + + unsigned long channels[S3C2410_DMA_CHANNELS]; +}; + +struct s3c24xx_dma_selection { + struct s3c24xx_dma_map *map; + unsigned long map_size; + unsigned long dcon_mask; + + void (*select)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map); +}; + +extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index cd39e868458..db6393c9986 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -18,21 +18,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog - * 13-Sep-2004 BJD Implemented change of MISCCR - * 14-Sep-2004 BJD Added getpin call - * 14-Sep-2004 BJD Fixed bug in setpin() call - * 30-Sep-2004 BJD Fixed cfgpin() mask bug - * 01-Oct-2004 BJD Added getcfg() to get pin configuration - * 01-Oct-2004 BJD Fixed mask bug in pullup() call - * 01-Oct-2004 BJD Added getirq() to turn pin into irqno - * 04-Oct-2004 BJD Added irq filter controls for GPIO - * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code - * 13-Mar-2005 BJD Updates for __iomem - * 26-Oct-2005 BJD Added generic configuration types - * 15-Jan-2006 LCVR Added support for the S3C2400 - */ +*/ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index cd6139b3599..3e9f3462c61 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -181,17 +181,19 @@ s3c_irq_unmask(unsigned int irqno) } struct irqchip s3c_irq_level_chip = { - .ack = s3c_irq_maskack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .name = "s3c-level", + .ack = s3c_irq_maskack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake }; static struct irqchip s3c_irq_chip = { - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake + .name = "s3c", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake }; static void @@ -343,19 +345,21 @@ s3c_irqext_type(unsigned int irq, unsigned int type) } static struct irqchip s3c_irqext_chip = { - .mask = s3c_irqext_mask, - .unmask = s3c_irqext_unmask, - .ack = s3c_irqext_ack, - .set_type = s3c_irqext_type, - .set_wake = s3c_irqext_wake + .name = "s3c-ext", + .mask = s3c_irqext_mask, + .unmask = s3c_irqext_unmask, + .ack = s3c_irqext_ack, + .set_type = s3c_irqext_type, + .set_wake = s3c_irqext_wake }; static struct irqchip s3c_irq_eint0t4 = { - .ack = s3c_irq_ack, - .mask = s3c_irq_mask, - .unmask = s3c_irq_unmask, - .set_wake = s3c_irq_wake, - .set_type = s3c_irqext_type, + .name = "s3c-ext0", + .ack = s3c_irq_ack, + .mask = s3c_irq_mask, + .unmask = s3c_irq_unmask, + .set_wake = s3c_irq_wake, + .set_type = s3c_irqext_type, }; /* mask values for the parent registers for each of the interrupt types */ @@ -387,9 +391,10 @@ s3c_irq_uart0_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart0 = { - .mask = s3c_irq_uart0_mask, - .unmask = s3c_irq_uart0_unmask, - .ack = s3c_irq_uart0_ack, + .name = "s3c-uart0", + .mask = s3c_irq_uart0_mask, + .unmask = s3c_irq_uart0_unmask, + .ack = s3c_irq_uart0_ack, }; /* UART1 */ @@ -413,9 +418,10 @@ s3c_irq_uart1_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart1 = { - .mask = s3c_irq_uart1_mask, - .unmask = s3c_irq_uart1_unmask, - .ack = s3c_irq_uart1_ack, + .name = "s3c-uart1", + .mask = s3c_irq_uart1_mask, + .unmask = s3c_irq_uart1_unmask, + .ack = s3c_irq_uart1_ack, }; /* UART2 */ @@ -439,9 +445,10 @@ s3c_irq_uart2_ack(unsigned int irqno) } static struct irqchip s3c_irq_uart2 = { - .mask = s3c_irq_uart2_mask, - .unmask = s3c_irq_uart2_unmask, - .ack = s3c_irq_uart2_ack, + .name = "s3c-uart2", + .mask = s3c_irq_uart2_mask, + .unmask = s3c_irq_uart2_unmask, + .ack = s3c_irq_uart2_ack, }; /* ADC and Touchscreen */ @@ -465,9 +472,10 @@ s3c_irq_adc_ack(unsigned int irqno) } static struct irqchip s3c_irq_adc = { - .mask = s3c_irq_adc_mask, - .unmask = s3c_irq_adc_unmask, - .ack = s3c_irq_adc_ack, + .name = "s3c-adc", + .mask = s3c_irq_adc_mask, + .unmask = s3c_irq_adc_unmask, + .ack = s3c_irq_adc_ack, }; /* irq demux for adc */ @@ -569,23 +577,104 @@ s3c_irq_demux_uart2(unsigned int irq, } static void -s3c_irq_demux_extint(unsigned int irq, - struct irqdesc *desc, - struct pt_regs *regs) +s3c_irq_demux_extint8(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) { unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); eintpnd &= ~eintmsk; + eintpnd &= ~0xff; /* ignore lower irqs */ - if (eintpnd) { - irq = fls(eintpnd); - irq += (IRQ_EINT4 - (4 + 1)); + /* we may as well handle all the pending IRQs here */ + while (eintpnd) { + irq = __ffs(eintpnd); + eintpnd &= ~(1<<irq); + + irq += (IRQ_EINT4 - 4); desc_handle_irq(irq, irq_desc + irq, regs); } + +} + +static void +s3c_irq_demux_extint4t7(unsigned int irq, + struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); + unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); + + eintpnd &= ~eintmsk; + eintpnd &= 0xff; /* only lower irqs */ + + /* we may as well handle all the pending IRQs here */ + + while (eintpnd) { + irq = __ffs(eintpnd); + eintpnd &= ~(1<<irq); + + irq += (IRQ_EINT4 - 4); + + desc_handle_irq(irq, irq_desc + irq, regs); + } +} + +#ifdef CONFIG_PM + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S3C2410_INTMSK), + SAVE_ITEM(S3C2410_INTSUBMSK), +}; + +/* the extint values move between the s3c2410/s3c2440 and the s3c2412 + * so we use an array to hold them, and to calculate the address of + * the register at run-time +*/ + +static unsigned long save_extint[3]; +static unsigned long save_eintflt[4]; +static unsigned long save_eintmask; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); + + s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + save_eintmask = __raw_readl(S3C24XX_EINTMASK); + + return 0; } +int s3c24xx_irq_resume(struct sys_device *dev) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); + + s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + __raw_writel(save_eintmask, S3C24XX_EINTMASK); + + return 0; +} + +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif + /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system @@ -674,8 +763,8 @@ void __init s3c24xx_init_irq(void) /* setup the cascade irq handlers */ - set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint); - set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint); + set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); + set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c new file mode 100644 index 00000000000..ba5109af40b --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -0,0 +1,266 @@ +/*********************************************************************** + * + * linux/arch/arm/mach-s3c2410/mach-amlm5900.c + * + * Copyright (c) 2006 American Microsystems Limited + * David Anders <danders@amltd.com> + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * @History: + * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by + * Ben Dooks <ben@simtec.co.uk> + * + ***********************************************************************/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/proc_fs.h> + + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/arch/fb.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-gpio.h> + +#include "devs.h" +#include "cpu.h" + +#ifdef CONFIG_MTD_PARTITIONS + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> + +static struct resource amlm5900_nor_resource = { + .start = 0x00000000, + .end = 0x01000000 - 1, + .flags = IORESOURCE_MEM, +}; + + + +static struct mtd_partition amlm5900_mtd_partitions[] = { + { + .name = "System", + .size = 0x240000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "Kernel", + .size = 0x100000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "Ramdisk", + .size = 0x300000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "JFFS2", + .size = 0x9A0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "Settings", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data amlm5900_flash_data = { + .width = 2, + .parts = amlm5900_mtd_partitions, + .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions), +}; + +static struct platform_device amlm5900_device_nor = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &amlm5900_flash_data, + }, + .num_resources = 1, + .resource = &amlm5900_nor_resource, +}; +#endif + +static struct map_desc amlm5900_iodesc[] __initdata = { + { + .virtual = (u32)S3C24XX_VA_SPI, + .pfn = __phys_to_pfn(S3C2410_PA_SPI), + .length = SZ_1M, + .type = MT_DEVICE + } +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg amlm5900_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + + +static struct platform_device *amlm5900_devices[] __initdata = { +#ifdef CONFIG_FB_S3C2410 + &s3c_device_lcd, +#endif + &s3c_device_adc, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_usb, + &s3c_device_rtc, + &s3c_device_usbgadget, + &s3c_device_sdi, +#ifdef CONFIG_MTD_PARTITIONS + &amlm5900_device_nor, +#endif +}; + +static struct s3c24xx_board amlm5900_board __initdata = { + .devices = amlm5900_devices, + .devices_count = ARRAY_SIZE(amlm5900_devices) +}; + +void __init amlm5900_map_io(void) +{ + s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + s3c24xx_set_board(&amlm5900_board); +} + +#ifdef CONFIG_FB_S3C2410 +static struct s3c2410fb_mach_info __initdata amlm5900_lcd_info = { + .width = 160, + .height = 160, + +/* commented out until stn patch is submitted +* .type = S3C2410_LCDCON1_STN4, +*/ + .gpccon = 0xaaaaaaaa, + .gpccon_mask = 0xffffffff, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaaaaaaaa, + .gpdcon_mask = 0xffffffff, + .gpdup = 0x0000ffff, + .gpdup_mask = 0xffffffff, + + .xres = { + .min = 160, + .max = 160, + .defval = 160, + }, + + .yres = { + .min = 160, + .max = 160, + .defval = 160, + }, + + .bpp = { + .min = 4, + .max = 4, + .defval = 4, + }, + + .regs = { + .lcdcon1 = 0x00008225, + .lcdcon2 = 0x0027c000, + .lcdcon3 = 0x00182708, + .lcdcon4 = 0x00000002, + .lcdcon5 = 0x00000001, + } +}; +#endif + +static irqreturn_t +amlm5900_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} + +static void amlm5900_init_pm(void) +{ + int ret = 0; + + ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt, + IRQF_TRIGGER_RISING | IRQF_SHARED, + "amlm5900_wakeup", &amlm5900_wake_interrupt); + if (ret != 0) { + printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret); + } else { + enable_irq_wake(IRQ_EINT9); + /* configure the suspend/resume status pin */ + s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); + s3c2410_gpio_pullup(S3C2410_GPF2, 0); + } +} +static void __init amlm5900_init(void) +{ + amlm5900_init_pm(); +#ifdef CONFIG_FB_S3C2410 + s3c24xx_fb_set_platdata(&amlm5900_lcd_info); +#endif +} + +MACHINE_START(AML_M5900, "AML_M5900") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = amlm5900_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = amlm5900_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 60641d452db..e94cdcd9659 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -4,15 +4,9 @@ * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 02-May-2005 BJD Copied from mach-bast.c - * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index d661c6b7ff5..e2205ff1b0e 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -11,15 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Modifications: - * 01-Nov-2004 BJD Initial version - * 12-Nov-2004 BJD Updated for release - * 04-Jan-2005 BJD Fixes for pre-release - * 22-Feb-2005 BJD Updated for 2.6.11-rc5 relesa - * 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA - * 14-Mar-2005 BJD void __iomem fixes - * 20-Sep-2005 BJD Added static to non-exported items - * 26-Oct-2005 BJD Added framebuffer data */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c new file mode 100644 index 00000000000..ea554e7c006 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-vstms.c @@ -0,0 +1,168 @@ +/* linux/arch/arm/mach-s3c2410/mach-vstms.c + * + * (C) 2006 Thomas Gleixner <tglx@linutronix.de> + * + * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/hardware/iomd.h> +#include <asm/setup.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-lcd.h> + +#include <asm/arch/idle.h> +#include <asm/arch/fb.h> + +#include <asm/arch/nand.h> + +#include "s3c2410.h" +#include "s3c2412.h" +#include "clock.h" +#include "devs.h" +#include "cpu.h" + + +static struct map_desc vstms_iodesc[] __initdata = { +}; + +static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + } +}; + +static struct mtd_partition vstms_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = 0x7C000, + .offset = 0, + }, + [1] = { + .name = "UBoot Config", + .offset = 0x7C000, + .size = 0x4000, + }, + [2] = { + .name = "Kernel", + .offset = 0x80000, + .size = 0x200000, + }, + [3] = { + .name = "RFS", + .offset = 0x280000, + .size = 0x3d80000, + }, +}; + +static struct s3c2410_nand_set vstms_nand_sets[] = { + [0] = { + .name = "NAND", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(vstms_nand_part), + .partitions = vstms_nand_part, + }, +}; + +/* choose a set of timings which should suit most 512Mbit + * chips and beyond. +*/ + +static struct s3c2410_platform_nand vstms_nand_info = { + .tacls = 20, + .twrph0 = 60, + .twrph1 = 20, + .nr_sets = ARRAY_SIZE(vstms_nand_sets), + .sets = vstms_nand_sets, +}; + +static struct platform_device *vstms_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, + &s3c_device_rtc, + &s3c_device_nand, +}; + +static struct s3c24xx_board vstms_board __initdata = { + .devices = vstms_devices, + .devices_count = ARRAY_SIZE(vstms_devices) +}; + +static void __init vstms_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, + struct meminfo *mi) +{ + if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { + mi->nr_banks=1; + mi->bank[0].start = 0x30000000; + mi->bank[0].size = SZ_64M; + mi->bank[0].node = 0; + } +} + +static void __init vstms_map_io(void) +{ + s3c_device_nand.dev.platform_data = &vstms_nand_info; + + s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); + s3c24xx_set_board(&vstms_board); +} + +MACHINE_START(VSTMS, "VSTMS") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .fixup = vstms_fixup, + .init_irq = s3c24xx_init_irq, + .map_io = vstms_map_io, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c index 7b244566a43..42cd05e298f 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -49,7 +49,8 @@ static __init int pm_simtec_init(void) /* check which machine we are running on */ if (!machine_is_bast() && !machine_is_vr1000() && - !machine_is_anubis() && !machine_is_osiris()) + !machine_is_anubis() && !machine_is_osiris() && + !machine_is_aml_m5900()) return 0; printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index a589fe76d91..b49a0b3b72b 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -1,9 +1,9 @@ /* linux/arch/arm/mach-s3c2410/pm.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright (c) 2004,2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 Power Manager (Suspend-To-RAM) support + * S3C24XX Power Manager (Suspend-To-RAM) support * * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information * @@ -24,9 +24,6 @@ * Parts based on arch/arm/mach-pxa/pm.c * * Thanks to Dimitry Andric for debugging - * - * Modifications: - * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART */ #include <linux/init.h> @@ -38,6 +35,7 @@ #include <linux/ioport.h> #include <linux/delay.h> +#include <asm/cacheflush.h> #include <asm/hardware.h> #include <asm/io.h> @@ -55,14 +53,6 @@ unsigned long s3c_pm_flags; -/* cache functions from arch/arm/mm/proc-arm920.S */ - -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH -extern void arm920_flush_kern_cache_all(void); -#else -static void arm920_flush_kern_cache_all(void) { } -#endif - #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { @@ -92,19 +82,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_REFRESH), }; -/* this lot should be really saved by the IRQ code */ -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_EXTINT0), - SAVE_ITEM(S3C2410_EXTINT1), - SAVE_ITEM(S3C2410_EXTINT2), - SAVE_ITEM(S3C2410_EINFLT0), - SAVE_ITEM(S3C2410_EINFLT1), - SAVE_ITEM(S3C2410_EINFLT2), - SAVE_ITEM(S3C2410_EINFLT3), - SAVE_ITEM(S3C2410_EINTMASK), - SAVE_ITEM(S3C2410_INTMSK) -}; - static struct sleep_save gpio_save[] = { SAVE_ITEM(S3C2410_GPACON), SAVE_ITEM(S3C2410_GPADAT), @@ -165,7 +142,7 @@ static struct sleep_save uart_save[] = { extern void printascii(const char *); -static void pm_dbg(const char *fmt, ...) +void pm_dbg(const char *fmt, ...) { va_list va; char buff[256]; @@ -509,6 +486,9 @@ static void s3c2410_pm_configure_extint(void) } } +void (*pm_cpu_prep)(void); +void (*pm_cpu_sleep)(void); + #define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) /* s3c2410_pm_enter @@ -519,7 +499,6 @@ static void s3c2410_pm_configure_extint(void) static int s3c2410_pm_enter(suspend_state_t state) { unsigned long regs_save[16]; - unsigned long tmp; /* ensure the debug is initialised (if enabled) */ @@ -527,6 +506,11 @@ static int s3c2410_pm_enter(suspend_state_t state) DBG("s3c2410_pm_enter(%d)\n", state); + if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { + printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); + return -EINVAL; + } + if (state != PM_SUSPEND_MEM) { printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n"); return -EINVAL; @@ -554,17 +538,9 @@ static int s3c2410_pm_enter(suspend_state_t state) DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); - /* ensure at least GESTATUS3 has the resume address */ - - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - - DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); - /* save all necessary core registers not covered by the drivers */ s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); @@ -581,10 +557,16 @@ static int s3c2410_pm_enter(suspend_state_t state) /* ack any outstanding external interrupts before we go to sleep */ __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); + __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); + __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); + + /* call cpu specific preperation */ + + pm_cpu_prep(); /* flush cache back to ram */ - arm920_flush_kern_cache_all(); + flush_cache_all(); s3c2410_pm_check_store(); @@ -592,23 +574,23 @@ static int s3c2410_pm_enter(suspend_state_t state) __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ - s3c2410_cpu_suspend(regs_save); + /* s3c2410_cpu_save will also act as our return point from when + * we resume as it saves its own register state, so use the return + * code to differentiate return from save and return from sleep */ + + if (s3c2410_cpu_save(regs_save) == 0) { + flush_cache_all(); + pm_cpu_sleep(); + } /* restore the cpu state */ cpu_init(); - /* unset the return-from-sleep flag, to ensure reset */ - - tmp = __raw_readl(S3C2410_GSTATUS2); - tmp &= S3C2410_GSTATUS2_OFFRESET; - __raw_writel(tmp, S3C2410_GSTATUS2); - /* restore the system state */ s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); - s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); s3c2410_pm_debug_init(); diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h index 7a5e714c738..ffe197a119f 100644 --- a/arch/arm/mach-s3c2410/pm.h +++ b/arch/arm/mach-s3c2410/pm.h @@ -34,13 +34,19 @@ extern unsigned long s3c_irqwake_eintmask; extern unsigned long s3c_irqwake_intallow; extern unsigned long s3c_irqwake_eintallow; +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + /* Flags for PM Control */ extern unsigned long s3c_pm_flags; /* from sleep.S */ -extern void s3c2410_cpu_suspend(unsigned long *saveblk); +extern int s3c2410_cpu_save(unsigned long *saveblk); +extern void s3c2410_cpu_suspend(void); extern void s3c2410_cpu_resume(void); extern unsigned long s3c2410_sleep_save_phys; @@ -57,3 +63,11 @@ struct sleep_save { extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c new file mode 100644 index 00000000000..51e5098b32e --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-dma.c @@ -0,0 +1,158 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include "dma.h" + +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { + .select = s3c2410_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2410_dma_mappings, + .map_size = ARRAY_SIZE(s3c2410_dma_mappings), +}; + +static int s3c2410_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2410_dma_sel); +} + +static struct sysdev_driver s3c2410_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2410_dma_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); +} + +arch_initcall(s3c2410_dma_init); + +/* S3C2442 DMA contains the same selection table as the S3C2410 */ + +static struct sysdev_driver s3c2442_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2442_dma_init(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); +} + +arch_initcall(s3c2442_dma_init); + + diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c new file mode 100644 index 00000000000..c796c9c76e7 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-irq.c @@ -0,0 +1,48 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/ptrace.h> +#include <linux/sysdev.h> + +#include "cpu.h" +#include "pm.h" + +static int s3c2410_irq_add(struct sys_device *sysdev) +{ + return 0; +} + +static struct sysdev_driver s3c2410_irq_driver = { + .add = s3c2410_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, +}; + +static int s3c2410_irq_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); +} + +arch_initcall(s3c2410_irq_init); diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c new file mode 100644 index 00000000000..e51d7666951 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-pm.c @@ -0,0 +1,120 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/mach-types.h> + +#include <asm/arch/regs-gpio.h> + +#include "cpu.h" +#include "pm.h" + +#ifdef CONFIG_S3C2410_PM_DEBUG +extern void pm_dbg(const char *fmt, ...); +#define DBG(fmt...) pm_dbg(fmt) +#else +#define DBG(fmt...) printk(KERN_DEBUG fmt) +#endif + +static void s3c2410_pm_prepare(void) +{ + /* ensure at least GSTATUS3 has the resume address */ + + __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); + + DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); + + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 1); + +} + +int s3c2410_pm_resume(struct sys_device *dev) +{ + unsigned long tmp; + + /* unset the return-from-sleep flag, to ensure reset */ + + tmp = __raw_readl(S3C2410_GSTATUS2); + tmp &= S3C2410_GSTATUS2_OFFRESET; + __raw_writel(tmp, S3C2410_GSTATUS2); + + if ( machine_is_aml_m5900() ) + s3c2410_gpio_setpin(S3C2410_GPF2, 0); + + return 0; +} + +static int s3c2410_pm_add(struct sys_device *dev) +{ + pm_cpu_prep = s3c2410_pm_prepare; + pm_cpu_sleep = s3c2410_cpu_suspend; + + return 0; +} + +static struct sysdev_driver s3c2410_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +/* register ourselves */ + +static int __init s3c2410_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver); +} + +arch_initcall(s3c2410_pm_drvinit); + +static struct sysdev_driver s3c2440_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +static int __init s3c2440_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver); +} + +arch_initcall(s3c2440_pm_drvinit); + +static struct sysdev_driver s3c2442_pm_driver = { + .add = s3c2410_pm_add, + .resume = s3c2410_pm_resume, +}; + +static int __init s3c2442_pm_drvinit(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver); +} + +arch_initcall(s3c2442_pm_drvinit); diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S new file mode 100644 index 00000000000..9179a102458 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-sleep.S @@ -0,0 +1,68 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 Power Manager (Suspend-To-RAM) support + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/hardware.h> +#include <asm/arch/map.h> + +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-clock.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-serial.h> + + /* s3c2410_cpu_suspend + * + * put the cpu into sleep mode + */ + +ENTRY(s3c2410_cpu_suspend) + @@ prepare cpu to sleep + + ldr r4, =S3C2410_REFRESH + ldr r5, =S3C24XX_MISCCR + ldr r6, =S3C2410_CLKCON + ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) + ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) + ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + + orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command + orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals + orr r9, r9, #S3C2410_CLKCON_POWER @ power down command + + teq pc, #0 @ first as a trial-run to load cache + bl s3c2410_do_sleep + teq r0, r0 @ now do it for real + b s3c2410_do_sleep @ + + @@ align next bit of code to cache line + .align 8 +s3c2410_do_sleep: + streq r7, [ r4 ] @ SDRAM sleep command + streq r8, [ r5 ] @ SDRAM power-down config + streq r9, [ r6 ] @ CPU sleep +1: beq 1b + mov pc, r14 diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index a110cff9cf6..183e4033ce6 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -8,17 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 16-May-2003 BJD Created initial version - * 16-Aug-2003 BJD Fixed header files and copyright, added URL - * 05-Sep-2003 BJD Moved to kernel v2.6 - * 18-Jan-2004 BJD Added serial port configuration - * 21-Aug-2004 BJD Added new struct s3c2410_board handler - * 28-Sep-2004 BJD Updates for new serial port bits - * 04-Nov-2004 BJD Updated UART configuration process - * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate - * 13-Aug-2005 DA Removed UART from initial I/O mappings */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c new file mode 100644 index 00000000000..171f3706d36 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412-dma.c @@ -0,0 +1,160 @@ +/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2412 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include <asm/io.h> + +#include "dma.h" +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } + +static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), + }, + [DMACH_SDI] = { + .name = "sdi", + .channels = MAP(S3C2412_DMAREQSEL_SDI), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels = MAP(S3C2412_DMAREQSEL_UART0_0), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels = MAP(S3C2412_DMAREQSEL_UART1_0), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels = MAP(S3C2412_DMAREQSEL_UART2_0), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_UART0_SRC2] = { + .name = "uart0", + .channels = MAP(S3C2412_DMAREQSEL_UART0_1), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1_SRC2] = { + .name = "uart1", + .channels = MAP(S3C2412_DMAREQSEL_UART1_1), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2_SRC2] = { + .name = "uart2", + .channels = MAP(S3C2412_DMAREQSEL_UART2_1), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels = MAP(S3C2412_DMAREQSEL_TIMER), + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels = MAP(S3C2412_DMAREQSEL_I2SRX), + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels = MAP(S3C2412_DMAREQSEL_I2STX), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels = MAP(S3C2412_DMAREQSEL_USBEP1), + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels = MAP(S3C2412_DMAREQSEL_USBEP2), + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels = MAP(S3C2412_DMAREQSEL_USBEP3), + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels = MAP(S3C2412_DMAREQSEL_USBEP4), + }, +}; + +static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + writel(chan->regs + S3C2412_DMA_DMAREQSEL, + map->channels[0] | S3C2412_DMAREQSEL_HW); +} + +static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { + .select = s3c2412_dma_select, + .dcon_mask = 0, + .map = s3c2412_dma_mappings, + .map_size = ARRAY_SIZE(s3c2412_dma_mappings), +}; + +static int s3c2412_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2412_dma_sel); +} + +static struct sysdev_driver s3c2412_dma_driver = { + .add = s3c2412_dma_add, +}; + +static int __init s3c2412_dma_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver); +} + +arch_initcall(s3c2412_dma_init); diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c index c80ec93dfea..7f741547658 100644 --- a/arch/arm/mach-s3c2410/s3c2412-irq.c +++ b/arch/arm/mach-s3c2410/s3c2412-irq.c @@ -37,6 +37,7 @@ #include "cpu.h" #include "irq.h" +#include "pm.h" /* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by * having them turn up in both the INT* and the EINT* registers. Whilst @@ -120,6 +121,8 @@ static int s3c2412_irq_add(struct sys_device *sysdev) static struct sysdev_driver s3c2412_irq_driver = { .add = s3c2412_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; static int s3c2412_irq_init(void) diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2410/s3c2412-pm.c new file mode 100644 index 00000000000..19b63322d25 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412-pm.c @@ -0,0 +1,128 @@ +/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/arch/regs-power.h> +#include <asm/arch/regs-gpioj.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-dsc.h> + +#include "cpu.h" +#include "pm.h" + +#include "s3c2412.h" + +static void s3c2412_cpu_suspend(void) +{ + unsigned long tmp; + + /* set our standby method to sleep */ + + tmp = __raw_readl(S3C2412_PWRCFG); + tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP; + __raw_writel(tmp, S3C2412_PWRCFG); + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); + + /* we should never get past here */ + + panic("sleep resumed to originator?"); +} + +static void s3c2412_pm_prepare(void) +{ +} + +static int s3c2412_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s3c2412_pm_prepare; + pm_cpu_sleep = s3c2412_cpu_suspend; + + return 0; +} + +static struct sleep_save s3c2412_sleep[] = { + SAVE_ITEM(S3C2412_DSC0), + SAVE_ITEM(S3C2412_DSC1), + SAVE_ITEM(S3C2413_GPJDAT), + SAVE_ITEM(S3C2413_GPJCON), + SAVE_ITEM(S3C2413_GPJUP), + + /* save the PWRCFG to get back to original sleep method */ + + SAVE_ITEM(S3C2412_PWRCFG), + + /* save the sleep configuration anyway, just in case these + * get damaged during wakeup */ + + SAVE_ITEM(S3C2412_GPBSLPCON), + SAVE_ITEM(S3C2412_GPCSLPCON), + SAVE_ITEM(S3C2412_GPDSLPCON), + SAVE_ITEM(S3C2412_GPESLPCON), + SAVE_ITEM(S3C2412_GPFSLPCON), + SAVE_ITEM(S3C2412_GPGSLPCON), + SAVE_ITEM(S3C2412_GPHSLPCON), + SAVE_ITEM(S3C2413_GPJSLPCON), +}; + +static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) +{ + s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + return 0; +} + +static int s3c2412_pm_resume(struct sys_device *dev) +{ + unsigned long tmp; + + tmp = __raw_readl(S3C2412_PWRCFG); + tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; + tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; + __raw_writel(tmp, S3C2412_PWRCFG); + + s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + return 0; +} + +static struct sysdev_driver s3c2412_pm_driver = { + .add = s3c2412_pm_add, + .suspend = s3c2412_pm_suspend, + .resume = s3c2412_pm_resume, +}; + +static __init int s3c2412_pm_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver); +} + +arch_initcall(s3c2412_pm_init); diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c index 2d163f7600b..e76431c4146 100644 --- a/arch/arm/mach-s3c2410/s3c2412.c +++ b/arch/arm/mach-s3c2410/s3c2412.c @@ -8,17 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 16-May-2003 BJD Created initial version - * 16-Aug-2003 BJD Fixed header files and copyright, added URL - * 05-Sep-2003 BJD Moved to kernel v2.6 - * 18-Jan-2004 BJD Added serial port configuration - * 21-Aug-2004 BJD Added new struct s3c2410_board handler - * 28-Sep-2004 BJD Updates for new serial port bits - * 04-Nov-2004 BJD Updated UART configuration process - * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate - * 13-Aug-2005 DA Removed UART from initial I/O mappings */ #include <linux/kernel.h> @@ -56,6 +45,13 @@ #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; + +static inline void s3c2412_init_gpio2(void) +{ + s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; +} +#else +#define s3c2412_init_gpio2() do { } while(0) #endif /* Initial IO mappings */ @@ -76,6 +72,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) /* rename devices that are s3c2412/s3c2413 specific */ s3c_device_sdi.name = "s3c2412-sdi"; + s3c_device_lcd.name = "s3c2412-lcd"; s3c_device_nand.name = "s3c2412-nand"; } @@ -110,7 +107,7 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) { /* move base of IO */ - s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; + s3c2412_init_gpio2(); /* set our idle function */ @@ -161,48 +158,8 @@ void __init s3c2412_init_clocks(int xtal) * as a driver which may support both 2410 and 2440 may try and use it. */ -#ifdef CONFIG_PM -static struct sleep_save s3c2412_sleep[] = { - SAVE_ITEM(S3C2412_DSC0), - SAVE_ITEM(S3C2412_DSC1), - SAVE_ITEM(S3C2413_GPJDAT), - SAVE_ITEM(S3C2413_GPJCON), - SAVE_ITEM(S3C2413_GPJUP), - - /* save the sleep configuration anyway, just in case these - * get damaged during wakeup */ - - SAVE_ITEM(S3C2412_GPBSLPCON), - SAVE_ITEM(S3C2412_GPCSLPCON), - SAVE_ITEM(S3C2412_GPDSLPCON), - SAVE_ITEM(S3C2412_GPESLPCON), - SAVE_ITEM(S3C2412_GPFSLPCON), - SAVE_ITEM(S3C2412_GPGSLPCON), - SAVE_ITEM(S3C2412_GPHSLPCON), - SAVE_ITEM(S3C2413_GPJSLPCON), -}; - -static int s3c2412_suspend(struct sys_device *dev, pm_message_t state) -{ - s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -static int s3c2412_resume(struct sys_device *dev) -{ - s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; -} - -#else -#define s3c2412_suspend NULL -#define s3c2412_resume NULL -#endif - struct sysdev_class s3c2412_sysclass = { set_kset_name("s3c2412-core"), - .suspend = s3c2412_suspend, - .resume = s3c2412_resume }; static int __init s3c2412_core_init(void) diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c new file mode 100644 index 00000000000..11e109c84a1 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2440-dma.c @@ -0,0 +1,164 @@ +/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2440 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> +#include <asm/arch/dma.h> +#include "dma.h" + +#include "cpu.h" + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-ac97.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/regs-sdi.h> +#include <asm/arch/regs-iis.h> +#include <asm/arch/regs-spi.h> + +static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_PCM_IN] = { + .name = "pcm-in", + .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, + .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_PCM_OUT] = { + .name = "pcm-out", + .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, + .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_MIC_IN] = { + .name = "mic-in", + .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2440_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { + .select = s3c2440_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2440_dma_mappings, + .map_size = ARRAY_SIZE(s3c2440_dma_mappings), +}; + +static int s3c2440_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2440_dma_sel); +} + +static struct sysdev_driver s3c2440_dma_driver = { + .add = s3c2440_dma_add, +}; + +static int __init s3c2440_dma_init(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver); +} + +arch_initcall(s3c2440_dma_init); + diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2410/s3c2440-dsc.c index 16fa2a3b38f..c92ea66ba45 100644 --- a/arch/arm/mach-s3c2410/s3c2440-dsc.c +++ b/arch/arm/mach-s3c2410/s3c2440-dsc.c @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 29-Aug-2004 BJD Start of drive-strength control - * 09-Nov-2004 BJD Added symbol export - * 11-Jan-2005 BJD Include fix */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c index 1667ba1fa43..fc08febe2e5 100644 --- a/arch/arm/mach-s3c2410/s3c2440-irq.c +++ b/arch/arm/mach-s3c2410/s3c2440-irq.c @@ -119,7 +119,7 @@ static int s3c2440_irq_add(struct sys_device *sysdev) } static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c2440_irq_add, + .add = s3c2440_irq_add, }; static int s3c2440_irq_init(void) diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c index 44c5affa9b8..0d13546c350 100644 --- a/arch/arm/mach-s3c2410/s3c244x-irq.c +++ b/arch/arm/mach-s3c2410/s3c244x-irq.c @@ -120,7 +120,9 @@ static int s3c244x_irq_add(struct sys_device *sysdev) } static struct sysdev_driver s3c2440_irq_driver = { - .add = s3c244x_irq_add, + .add = s3c244x_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; static int s3c2440_irq_init(void) @@ -131,9 +133,12 @@ static int s3c2440_irq_init(void) arch_initcall(s3c2440_irq_init); static struct sysdev_driver s3c2442_irq_driver = { - .add = s3c244x_irq_add, + .add = s3c244x_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; + static int s3c2442_irq_init(void) { return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver); diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index a7561a79fc8..2018c2e1dcc 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -41,15 +41,25 @@ .text - /* s3c2410_cpu_suspend + /* s3c2410_cpu_save * - * put the cpu into sleep mode + * save enough of the CPU state to allow us to re-start + * pm.c code. as we store items like the sp/lr, we will + * end up returning from this function when the cpu resumes + * so the return value is set to mark this. + * + * This arangement means we avoid having to flush the cache + * from this code. * * entry: - * r0 = sleep save block + * r0 = pointer to save block + * + * exit: + * r0 = 0 => we stored everything + * 1 => resumed from sleep */ -ENTRY(s3c2410_cpu_suspend) +ENTRY(s3c2410_cpu_save) stmfd sp!, { r4 - r12, lr } @@ store co-processor registers @@ -62,44 +72,14 @@ ENTRY(s3c2410_cpu_suspend) stmia r0, { r4 - r13 } - @@ flush the caches to ensure everything is back out to - @@ SDRAM before the core powers down - -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - bl arm920_flush_kern_cache_all -#endif - - @@ prepare cpu to sleep - - ldr r4, =S3C2410_REFRESH - ldr r5, =S3C24XX_MISCCR - ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) - - orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command - orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals - orr r9, r9, #S3C2410_CLKCON_POWER @ power down command - - teq pc, #0 @ first as a trial-run to load cache - bl s3c2410_do_sleep - teq r0, r0 @ now do it for real - b s3c2410_do_sleep @ - - @@ align next bit of code to cache line - .align 8 -s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep -1: beq 1b - mov pc, r14 + mov r0, #0 + ldmfd sp, { r4 - r12, pc } @@ return to the caller, after having the MMU @@ turned on, this restores the last bits from the @@ stack resume_with_mmu: + mov r0, #1 ldmfd sp!, { r4 - r12, pc } .ltorg diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 6b22d8f0a00..c635efa7cd3 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -10,12 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 14-Sep-2004 BJD Created - * 18-Oct-2004 BJD Cleanups, and added code to report OC cleared - * 09-Aug-2005 BJD Renamed s3c2410_report_oc to s3c2410_usb_report_oc - * 09-Aug-2005 BJD Ports powered only if both are enabled */ #define DEBUG |