aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2440
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2440')
-rw-r--r--arch/arm/mach-s3c2440/Kconfig71
-rw-r--r--arch/arm/mach-s3c2440/Makefile23
-rw-r--r--arch/arm/mach-s3c2440/clock.c170
-rw-r--r--arch/arm/mach-s3c2440/dma.c210
-rw-r--r--arch/arm/mach-s3c2440/dsc.c54
-rw-r--r--arch/arm/mach-s3c2440/irq.c130
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c325
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c158
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c303
-rw-r--r--arch/arm/mach-s3c2440/mach-rx3715.c243
-rw-r--r--arch/arm/mach-s3c2440/mach-smdk2440.c207
-rw-r--r--arch/arm/mach-s3c2440/s3c2440.c52
12 files changed, 1946 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
new file mode 100644
index 00000000000..e3bfda098c0
--- /dev/null
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -0,0 +1,71 @@
+# arch/arm/mach-s3c2440/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2440
+ bool
+ depends on ARCH_S3C2410
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ select S3C2410_GPIO
+ select S3C2440_DMA if S3C2410_DMA
+ select CPU_S3C244X
+ help
+ Support for S3C2440 Samsung Mobile CPU based systems.
+
+config S3C2440_DMA
+ bool
+ depends on ARCH_S3C2410 && CPU_S3C24405B
+ help
+ Support for S3C2440 specific DMA code5A
+
+
+menu "S3C2440 Machines"
+
+config MACH_ANUBIS
+ bool "Simtec Electronics ANUBIS"
+ select CPU_S3C2440
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the Simtec Electronics ANUBIS
+ development system
+
+config MACH_OSIRIS
+ bool "Simtec IM2440D20 (OSIRIS) module"
+ select CPU_S3C2440
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the Simtec IM2440D20 module, also
+ known as the Osiris.
+
+config MACH_RX3715
+ bool "HP iPAQ rx3715"
+ select CPU_S3C2440
+ select PM_H1940 if PM
+ help
+ Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+ bool "SMDK2440"
+ select CPU_S3C2440
+ select MACH_SMDK
+ help
+ Say Y here if you are using the SMDK2440.
+
+config MACH_NEXCODER_2440
+ bool "NexVision NEXCODER 2440 Light Board"
+ select CPU_S3C2440
+ help
+ Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config SMDK2440_CPU2440
+ bool "SMDK2440 with S3C2440 CPU module"
+ depends on ARCH_S3C2440
+ default y if ARCH_S3C2440
+ select CPU_S3C2440
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
new file mode 100644
index 00000000000..c81ed6248dc
--- /dev/null
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -0,0 +1,23 @@
+# arch/arm/mach-s3c2440/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2440) += irq.o
+obj-$(CONFIG_CPU_S3C2440) += clock.o
+obj-$(CONFIG_S3C2440_DMA) += dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
+obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
+obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
new file mode 100644
index 00000000000..79e2ea4adaf
--- /dev/null
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -0,0 +1,170 @@
+/* linux/arch/arm/mach-s3c2440/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* S3C2440 extended clock support */
+
+static unsigned long s3c2440_camif_upll_round(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ /* note, we remove the +/- 1 calculations for the divisor */
+
+ div = (parent_rate / rate) / 2;
+
+ if (div < 1)
+ div = 1;
+ else if (div > 16)
+ div = 16;
+
+ return parent_rate / (div * 2);
+}
+
+static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+
+ rate = s3c2440_camif_upll_round(clk, rate);
+
+ camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
+
+ if (rate != parent_rate) {
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= (((parent_rate / rate) / 2) - 1);
+ }
+
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+/* Extra S3C2440 clocks */
+
+static struct clk s3c2440_clk_cam = {
+ .name = "camif",
+ .id = -1,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2440_clk_cam_upll = {
+ .name = "camif-upll",
+ .id = -1,
+ .set_rate = s3c2440_camif_upll_setrate,
+ .round_rate = s3c2440_camif_upll_round,
+};
+
+static struct clk s3c2440_clk_ac97 = {
+ .name = "ac97",
+ .id = -1,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2440_CLKCON_CAMERA,
+};
+
+static int s3c2440_clk_add(struct sys_device *sysdev)
+{
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+ unsigned long clkdivn;
+ struct clk *clock_h;
+ struct clk *clock_p;
+ struct clk *clock_upll;
+
+ printk("S3C2440: Clock Support, DVS %s\n",
+ (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+ clock_p = clk_get(NULL, "pclk");
+ clock_h = clk_get(NULL, "hclk");
+ clock_upll = clk_get(NULL, "upll");
+
+ if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
+ return -EINVAL;
+ }
+
+ /* check rate of UPLL, and if it is near 96MHz, then change
+ * to using half the UPLL rate for the system */
+
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
+
+ mutex_lock(&clocks_mutex);
+
+ clkdivn = __raw_readl(S3C2410_CLKDIVN);
+ clkdivn |= S3C2440_CLKDIVN_UCLK;
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+ mutex_unlock(&clocks_mutex);
+ }
+
+ s3c2440_clk_cam.parent = clock_h;
+ s3c2440_clk_ac97.parent = clock_p;
+ s3c2440_clk_cam_upll.parent = clock_upll;
+
+ s3c24xx_register_clock(&s3c2440_clk_ac97);
+ s3c24xx_register_clock(&s3c2440_clk_cam);
+ s3c24xx_register_clock(&s3c2440_clk_cam_upll);
+
+ clk_disable(&s3c2440_clk_ac97);
+ clk_disable(&s3c2440_clk_cam);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_clk_driver = {
+ .add = s3c2440_clk_add,
+};
+
+static __init int s3c24xx_clk_driver(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+}
+
+arch_initcall(s3c24xx_clk_driver);
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
new file mode 100644
index 00000000000..cd035a3ec87
--- /dev/null
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -0,0 +1,210 @@
+/* linux/arch/arm/mach-s3c2440/dma.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+ .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_PCM_IN] = {
+ .name = "pcm-in",
+ .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
+ .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
+ .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+ },
+ [DMACH_PCM_OUT] = {
+ .name = "pcm-out",
+ .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
+ .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
+ .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+ },
+ [DMACH_MIC_IN] = {
+ .name = "mic-in",
+ .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
+ .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
+ .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
+ },
+ [DMACH_USB_EP1] = {
+ .name = "usb-ep1",
+ .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP2] = {
+ .name = "usb-ep2",
+ .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP3] = {
+ .name = "usb-ep3",
+ .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP4] = {
+ .name = "usb-ep4",
+ .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+ },
+};
+
+static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
+{
+ chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
+ .select = s3c2440_dma_select,
+ .dcon_mask = 7 << 24,
+ .map = s3c2440_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2440_dma_mappings),
+};
+
+static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
+ .channels = {
+ [DMACH_SDI] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ [2] = 1 | DMA_CH_VALID,
+ [3] = 0 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_IN] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_OUT] = {
+ .list = {
+ [0] = 2 | DMA_CH_VALID,
+ [1] = 1 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_PCM_IN] = {
+ .list = {
+ [0] = 2 | DMA_CH_VALID,
+ [1] = 1 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_PCM_OUT] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 3 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_MIC_IN] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ },
+};
+
+static int s3c2440_dma_add(struct sys_device *sysdev)
+{
+ s3c2410_dma_init();
+ s3c24xx_dma_order_set(&s3c2440_dma_order);
+ return s3c24xx_dma_init_map(&s3c2440_dma_sel);
+}
+
+static struct sysdev_driver s3c2440_dma_driver = {
+ .add = s3c2440_dma_add,
+};
+
+static int __init s3c2440_dma_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver);
+}
+
+arch_initcall(s3c2440_dma_init);
+
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
new file mode 100644
index 00000000000..2995ff5681b
--- /dev/null
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s3c2440/dsc.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 Drive Strength Control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-dsc.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+
+int s3c2440_set_dsc(unsigned int pin, unsigned int value)
+{
+ void __iomem *base;
+ unsigned long val;
+ unsigned long flags;
+ unsigned long mask;
+
+ base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
+ mask = 3 << S3C2440_DSC_GETSHIFT(pin);
+
+ local_irq_save(flags);
+
+ val = __raw_readl(base);
+ val &= ~mask;
+ val |= value & mask;
+ __raw_writel(val, base);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
new file mode 100644
index 00000000000..1069d13d8c5
--- /dev/null
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2440/irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+ struct irq_desc *mydesc;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= 13;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ mydesc = irq_desc + IRQ_S3C2440_WDT;
+ desc_handle_irq(IRQ_S3C2440_WDT, mydesc);
+ }
+ if (subsrc & 2) {
+ mydesc = irq_desc + IRQ_S3C2440_AC97;
+ desc_handle_irq(IRQ_S3C2440_AC97, mydesc);
+ }
+ }
+}
+
+
+#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
+}
+
+static struct irq_chip s3c_irq_wdtac97 = {
+ .mask = s3c_irq_wdtac97_mask,
+ .unmask = s3c_irq_wdtac97_unmask,
+ .ack = s3c_irq_wdtac97_ack,
+};
+
+static int s3c2440_irq_add(struct sys_device *sysdev)
+{
+ unsigned int irqno;
+
+ printk("S3C2440: IRQ Support\n");
+
+ /* add new chained handler for wdt, ac7 */
+
+ set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
+ set_irq_handler(IRQ_WDT, handle_level_irq);
+ set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+ for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+ set_irq_chip(irqno, &s3c_irq_wdtac97);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_irq_driver = {
+ .add = s3c2440_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+}
+
+arch_initcall(s3c2440_irq_init);
+
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
new file mode 100644
index 00000000000..3f0288eb1ed
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -0,0 +1,325 @@
+/* linux/arch/arm/mach-s3c2440/mach-anubis.c
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/anubis-map.h>
+#include <asm/arch/anubis-irq.h>
+#include <asm/arch/anubis-cpld.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+ /* ISA IO areas */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(0x0),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(0x0),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ },
+
+ /* we could possibly compress the next set down into a set of smaller tables
+ * pagetables, but that would mean using an L2 section, and it still means
+ * we cannot actually feed the same register to an LDR due to 16K spacing
+ */
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)ANUBIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)ANUBIS_VA_CTRL2,
+ .pfn = __phys_to_pfn(ANUBIS_PA_CTRL2),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
+ [0] = {
+ .name = "uclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+ [1] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ }
+};
+
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = anubis_serial_clocks,
+ .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+ },
+ [1] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = anubis_serial_clocks,
+ .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+ },
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition anubis_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set anubis_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part,
+ },
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(ANUBIS_VA_CTRL1);
+ tmp &= ~ANUBIS_CTRL1_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+ __raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand anubis_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(anubis_nand_sets),
+ .sets = anubis_nand_sets,
+ .select_chip = anubis_nand_select,
+};
+
+/* IDE channels */
+
+static struct resource anubis_ide0_resource[] = {
+ {
+ .start = S3C2410_CS3,
+ .end = S3C2410_CS3 + (8*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = S3C2410_CS3 + (1<<26),
+ .end = S3C2410_CS3 + (1<<26) + (8*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_IDE0,
+ .end = IRQ_IDE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device anubis_device_ide0 = {
+ .name = "simtec-ide",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(anubis_ide0_resource),
+ .resource = anubis_ide0_resource,
+};
+
+static struct resource anubis_ide1_resource[] = {
+ {
+ .start = S3C2410_CS4,
+ .end = S3C2410_CS4 + (8*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = S3C2410_CS4 + (1<<26),
+ .end = S3C2410_CS4 + (1<<26) + (8*32) - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_IDE0,
+ .end = IRQ_IDE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct platform_device anubis_device_ide1 = {
+ .name = "simtec-ide",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(anubis_ide1_resource),
+ .resource = anubis_ide1_resource,
+};
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &anubis_device_ide0,
+ &anubis_device_ide1,
+};
+
+static struct clk *anubis_clocks[] = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+static struct s3c24xx_board anubis_board __initdata = {
+ .devices = anubis_devices,
+ .devices_count = ARRAY_SIZE(anubis_devices),
+ .clocks = anubis_clocks,
+ .clocks_count = ARRAY_SIZE(anubis_clocks),
+};
+
+static void __init anubis_map_io(void)
+{
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = NULL;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = NULL;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c_device_nand.dev.platform_data = &anubis_nand_info;
+
+ s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ s3c24xx_set_board(&anubis_board);
+
+ /* ensure that the GPIO is setup */
+ s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = anubis_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
new file mode 100644
index 00000000000..6d551d88330
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -0,0 +1,158 @@
+/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
+ *
+ * Copyright (c) 2004 Nex Vision
+ * Guillaume GOURAT <guillaume.gourat@nexvision.tv>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 15-10-2004 GG Created initial version
+ * 12-03-2005 BJD Updated for release
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/setup.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-serial.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc nexcoder_iodesc[] __initdata = {
+ /* nothing here yet */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* NOR Flash on NexVision NexCoder 2440 board */
+
+static struct resource nexcoder_nor_resource[] = {
+ [0] = {
+ .start = S3C2410_CS0,
+ .end = S3C2410_CS0 + (8*1024*1024) - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct map_info nexcoder_nor_map = {
+ .bankwidth = 2,
+};
+
+static struct platform_device nexcoder_device_nor = {
+ .name = "mtd-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nexcoder_nor_resource),
+ .resource = nexcoder_nor_resource,
+ .dev =
+ {
+ .platform_data = &nexcoder_nor_map,
+ }
+};
+
+/* Standard Nexcoder devices */
+
+static struct platform_device *nexcoder_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &s3c_device_camif,
+ &s3c_device_spi0,
+ &s3c_device_spi1,
+ &nexcoder_device_nor,
+};
+
+static struct s3c24xx_board nexcoder_board __initdata = {
+ .devices = nexcoder_devices,
+ .devices_count = ARRAY_SIZE(nexcoder_devices),
+};
+
+
+static void __init nexcoder_sensorboard_init(void)
+{
+ // Initialize SCCB bus
+ s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
+ s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
+ s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
+ s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+
+ // Power up the sensor board
+ s3c2410_gpio_setpin(S3C2410_GPF1, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+}
+
+static void __init nexcoder_map_io(void)
+{
+ s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+ s3c24xx_set_board(&nexcoder_board);
+ nexcoder_sensorboard_init();
+}
+
+
+MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
+ /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = nexcoder_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
new file mode 100644
index 00000000000..2ed8e51f20c
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -0,0 +1,303 @@
+/* linux/arch/arm/mach-s3c2440/mach-osiris.c
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/osiris-map.h>
+#include <asm/arch/osiris-cpld.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* onboard perihpheral map */
+
+static struct map_desc osiris_iodesc[] __initdata = {
+ /* ISA IO areas (may be over-written later) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)OSIRIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL2,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
+ [0] = {
+ .name = "uclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+ [1] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ }
+};
+
+static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = osiris_serial_clocks,
+ .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = osiris_serial_clocks,
+ .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = osiris_serial_clocks,
+ .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ }
+};
+
+/* NAND Flash on Osiris board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition osiris_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set osiris_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+};
+
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(OSIRIS_VA_CTRL1);
+ tmp &= ~OSIRIS_CTRL1_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("osiris_nand: ctrl1 now %02x\n", tmp);
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand osiris_nand_info = {
+ .tacls = 25,
+ .twrph0 = 60,
+ .twrph1 = 60,
+ .nr_sets = ARRAY_SIZE(osiris_nand_sets),
+ .sets = osiris_nand_sets,
+ .select_chip = osiris_nand_select,
+};
+
+/* PCMCIA control and configuration */
+
+static struct resource osiris_pcmcia_resource[] = {
+ [0] = {
+ .start = 0x0f000000,
+ .end = 0x0f100000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x0c000000,
+ .end = 0x0c100000,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device osiris_pcmcia = {
+ .name = "osiris-pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
+ .resource = osiris_pcmcia_resource,
+};
+
+/* Standard Osiris devices */
+
+static struct platform_device *osiris_devices[] __initdata = {
+ &s3c_device_i2c,
+ &s3c_device_nand,
+ &osiris_pcmcia,
+};
+
+static struct clk *osiris_clocks[] = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+static struct s3c24xx_board osiris_board __initdata = {
+ .devices = osiris_devices,
+ .devices_count = ARRAY_SIZE(osiris_devices),
+ .clocks = osiris_clocks,
+ .clocks_count = ARRAY_SIZE(osiris_clocks),
+};
+
+static void __init osiris_map_io(void)
+{
+ unsigned long flags;
+
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = NULL;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = NULL;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c_device_nand.dev.platform_data = &osiris_nand_info;
+
+ s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ s3c24xx_set_board(&osiris_board);
+
+ /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+
+ local_irq_save(flags);
+ __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+ local_irq_restore(flags);
+
+ /* write-protect line to the NAND */
+ s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = osiris_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
new file mode 100644
index 00000000000..480ccde63fb
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -0,0 +1,243 @@
+/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.handhelds.org/projects/rx3715.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/h1940.h>
+#include <asm/arch/nand.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+static struct map_desc rx3715_iodesc[] __initdata = {
+ /* dump ISA space somewhere unused */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS3),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+
+static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = {
+ [0] = {
+ .name = "fclk",
+ .divisor = 0,
+ .min_baud = 0,
+ .max_baud = 0,
+ }
+};
+
+static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clocks = rx3715_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x00,
+ .clocks = rx3715_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .uart_flags = UPF_CONS_FLOW,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ .clocks = rx3715_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ }
+};
+
+/* framebuffer lcd controller information */
+
+static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = {
+ .regs = {
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \
+ S3C2410_LCDCON1_TFT | \
+ S3C2410_LCDCON1_CLKVAL(0x0C),
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(5) | \
+ S3C2410_LCDCON2_LINEVAL(319) | \
+ S3C2410_LCDCON2_VFPD(6) | \
+ S3C2410_LCDCON2_VSPW(2),
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(35) | \
+ S3C2410_LCDCON3_HOZVAL(239) | \
+ S3C2410_LCDCON3_HFPD(35),
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | \
+ S3C2410_LCDCON4_HSPW(7),
+
+ .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = 0xf82,
+
+ .gpccon = 0xaa955699,
+ .gpccon_mask = 0xffc003cc,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+
+ .gpdcon = 0xaa95aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+
+ .fixed_syncs = 1,
+ .width = 240,
+ .height = 320,
+
+ .xres = {
+ .min = 240,
+ .max = 240,
+ .defval = 240,
+ },
+
+ .yres = {
+ .max = 320,
+ .min = 320,
+ .defval = 320,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+static struct mtd_partition rx3715_nand_part[] = {
+ [0] = {
+ .name = "Whole Flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct s3c2410_nand_set rx3715_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx3715_nand_part),
+ .partitions = rx3715_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand rx3715_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx3715_nand_sets),
+ .sets = rx3715_nand_sets,
+};
+
+static struct platform_device *rx3715_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_iis,
+ &s3c_device_nand,
+};
+
+static struct s3c24xx_board rx3715_board __initdata = {
+ .devices = rx3715_devices,
+ .devices_count = ARRAY_SIZE(rx3715_devices)
+};
+
+static void __init rx3715_map_io(void)
+{
+ s3c_device_nand.dev.platform_data = &rx3715_nand_info;
+
+ s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
+ s3c24xx_init_clocks(16934000);
+ s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+ s3c24xx_set_board(&rx3715_board);
+}
+
+static void __init rx3715_init_irq(void)
+{
+ s3c24xx_init_irq();
+}
+
+static void __init rx3715_init_machine(void)
+{
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+ s3c2410_pm_init();
+
+ s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
+}
+
+
+MACHINE_START(RX3715, "IPAQ-RX3715")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = rx3715_map_io,
+ .init_irq = rx3715_init_irq,
+ .init_machine = rx3715_init_machine,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
new file mode 100644
index 00000000000..c17eb5b1f6b
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -0,0 +1,207 @@
+/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
+ *
+ * Copyright (c) 2004,2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+
+static struct map_desc smdk2440_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x04),
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(7) |
+ S3C2410_LCDCON2_LINEVAL(319) |
+ S3C2410_LCDCON2_VFPD(6) |
+ S3C2410_LCDCON2_VSPW(3),
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(19) |
+ S3C2410_LCDCON3_HOZVAL(239) |
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+ .type = S3C2410_LCDCON1_TFT16BPP,
+
+ .width = 240,
+ .height = 320,
+
+ .xres = {
+ .min = 240,
+ .max = 240,
+ .defval = 240,
+ },
+
+ .yres = {
+ .min = 320,
+ .max = 320,
+ .defval = 320,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+static struct platform_device *smdk2440_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_iis,
+};
+
+static struct s3c24xx_board smdk2440_board __initdata = {
+ .devices = smdk2440_devices,
+ .devices_count = ARRAY_SIZE(smdk2440_devices)
+};
+
+static void __init smdk2440_map_io(void)
+{
+ s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
+ s3c24xx_init_clocks(16934400);
+ s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+ s3c24xx_set_board(&smdk2440_board);
+}
+
+static void __init smdk2440_machine_init(void)
+{
+ s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
+
+ smdk_machine_init();
+}
+
+MACHINE_START(S3C2440, "SMDK2440")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2440_map_io,
+ .init_machine = smdk2440_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
new file mode 100644
index 00000000000..90e1da61fbc
--- /dev/null
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-s3c2440/s3c2440.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct sys_device s3c2440_sysdev = {
+ .cls = &s3c2440_sysclass,
+};
+
+int __init s3c2440_init(void)
+{
+ printk("S3C2440: Initialising architecture\n");
+
+ /* change irq for watchdog */
+
+ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
+
+ /* register our system device for everything else */
+
+ return sysdev_register(&s3c2440_sysdev);
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 09:34:54 +0000