aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mm/proc-xscale.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mm/proc-xscale.S')
-rw-r--r--arch/arm/mm/proc-xscale.S136
1 files changed, 0 insertions, 136 deletions
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 2d977b4eeea..b88de270014 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -370,142 +370,6 @@ ENTRY(cpu_xscale_dcache_clean_area)
bhi 1b
mov pc, lr
-/* ================================ CACHE LOCKING============================
- *
- * The XScale MicroArchitecture implements support for locking entries into
- * the data and instruction cache. The following functions implement the core
- * low level instructions needed to accomplish the locking. The developer's
- * manual states that the code that performs the locking must be in non-cached
- * memory. To accomplish this, the code in xscale-cache-lock.c copies the
- * following functions from the cache into a non-cached memory region that
- * is allocated through consistent_alloc().
- *
- */
- .align 5
-/*
- * xscale_icache_lock
- *
- * r0: starting address to lock
- * r1: end address to lock
- */
-ENTRY(xscale_icache_lock)
-
-iLockLoop:
- bic r0, r0, #CACHELINESIZE - 1
- mcr p15, 0, r0, c9, c1, 0 @ lock into cache
- cmp r0, r1 @ are we done?
- add r0, r0, #CACHELINESIZE @ advance to next cache line
- bls iLockLoop
- mov pc, lr
-
-/*
- * xscale_icache_unlock
- */
-ENTRY(xscale_icache_unlock)
- mcr p15, 0, r0, c9, c1, 1 @ Unlock icache
- mov pc, lr
-
-/*
- * xscale_dcache_lock
- *
- * r0: starting address to lock
- * r1: end address to lock
- */
-ENTRY(xscale_dcache_lock)
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
- mov r2, #1
- mcr p15, 0, r2, c9, c2, 0 @ Put dcache in lock mode
- cpwait ip @ Wait for completion
-
- mrs r2, cpsr
- orr r3, r2, #PSR_F_BIT | PSR_I_BIT
-dLockLoop:
- msr cpsr_c, r3
- mcr p15, 0, r0, c7, c10, 1 @ Write back line if it is dirty
- mcr p15, 0, r0, c7, c6, 1 @ Flush/invalidate line
- msr cpsr_c, r2
- ldr ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from
- @ location [r0]. Post-increment
- @ r3 to next cache line
- cmp r0, r1 @ Are we done?
- bls dLockLoop
-
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
- mov r2, #0
- mcr p15, 0, r2, c9, c2, 0 @ Get out of lock mode
- cpwait_ret lr, ip
-
-/*
- * xscale_dcache_unlock
- */
-ENTRY(xscale_dcache_unlock)
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
- mcr p15, 0, ip, c9, c2, 1 @ Unlock cache
- mov pc, lr
-
-/*
- * Needed to determine the length of the code that needs to be copied.
- */
- .align 5
-ENTRY(xscale_cache_dummy)
- mov pc, lr
-
-/* ================================ TLB LOCKING==============================
- *
- * The XScale MicroArchitecture implements support for locking entries into
- * the Instruction and Data TLBs. The following functions provide the
- * low level support for supporting these under Linux. xscale-lock.c
- * implements some higher level management code. Most of the following
- * is taken straight out of the Developer's Manual.
- */
-
-/*
- * Lock I-TLB entry
- *
- * r0: Virtual address to translate and lock
- */
- .align 5
-ENTRY(xscale_itlb_lock)
- mrs r2, cpsr
- orr r3, r2, #PSR_F_BIT | PSR_I_BIT
- msr cpsr_c, r3 @ Disable interrupts
- mcr p15, 0, r0, c8, c5, 1 @ Invalidate I-TLB entry
- mcr p15, 0, r0, c10, c4, 0 @ Translate and lock
- msr cpsr_c, r2 @ Restore interrupts
- cpwait_ret lr, ip
-
-/*
- * Lock D-TLB entry
- *
- * r0: Virtual address to translate and lock
- */
- .align 5
-ENTRY(xscale_dtlb_lock)
- mrs r2, cpsr
- orr r3, r2, #PSR_F_BIT | PSR_I_BIT
- msr cpsr_c, r3 @ Disable interrupts
- mcr p15, 0, r0, c8, c6, 1 @ Invalidate D-TLB entry
- mcr p15, 0, r0, c10, c8, 0 @ Translate and lock
- msr cpsr_c, r2 @ Restore interrupts
- cpwait_ret lr, ip
-
-/*
- * Unlock all I-TLB entries
- */
- .align 5
-ENTRY(xscale_itlb_unlock)
- mcr p15, 0, ip, c10, c4, 1 @ Unlock I-TLB
- mcr p15, 0, ip, c8, c5, 0 @ Invalidate I-TLB
- cpwait_ret lr, ip
-
-/*
- * Unlock all D-TLB entries
- */
-ENTRY(xscale_dtlb_unlock)
- mcr p15, 0, ip, c10, c8, 1 @ Unlock D-TBL
- mcr p15, 0, ip, c8, c6, 0 @ Invalidate D-TLB
- cpwait_ret lr, ip
-
/* =============================== PageTable ============================== */
#define PTE_CACHE_WRITE_ALLOCATE 0