aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-s3c24xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-s3c24xx')
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig66
-rw-r--r--arch/arm/plat-s3c24xx/Makefile12
-rw-r--r--arch/arm/plat-s3c24xx/adc.c119
-rw-r--r--arch/arm/plat-s3c24xx/cpu-freq-debugfs.c199
-rw-r--r--arch/arm/plat-s3c24xx/cpu-freq.c716
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c12
-rw-r--r--arch/arm/plat-s3c24xx/devs.c81
-rw-r--r--arch/arm/plat-s3c24xx/dma.c6
-rw-r--r--arch/arm/plat-s3c24xx/gpio.c1
-rw-r--r--arch/arm/plat-s3c24xx/gpiolib.c13
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h287
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/fiq.h13
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/irq.h21
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/mci.h3
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2410.h2
-rw-r--r--arch/arm/plat-s3c24xx/irq.c86
-rw-r--r--arch/arm/plat-s3c24xx/pwm.c409
-rw-r--r--arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c64
-rw-r--r--arch/arm/plat-s3c24xx/s3c2410-iotiming.c477
-rw-r--r--arch/arm/plat-s3c24xx/s3c2412-iotiming.c285
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-cpufreq.c311
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c97
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c127
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c38
24 files changed, 2988 insertions, 457 deletions
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..9c7aca48964 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select S3C_DEVICE_NAND
help
Base platform code for any Samsung S3C24XX device
@@ -34,6 +35,40 @@ config CPU_S3C244X
help
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -105,8 +140,39 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
SPI GPIO configuration code for BUS 1 when connected to
GPG5, GPG6 and GPG7.
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+ bool
+ help
+ SPI GPIO configuration code for BUS 1 when connected to
+ GPD8, GPD9 and GPD10.
+
# common code for s3c24xx based machines, such as the SMDKs.
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select io timing code that is common to the s3c2410
+ and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ help
+ Intel node to select io timing code that is common to the s3c2412
+ and the s3c2443.
+
config MACH_SMDK
bool
help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..7780d2dd833 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,19 +20,28 @@ obj-y += gpiolib.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
+
# Architecture dependant builds
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
+obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
# device specific setup and/or initialisation
obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
@@ -41,6 +50,7 @@ obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o
# machine common support
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9..8c443153d05 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <linux/list.h>
#include <linux/err.h>
#include <linux/clk.h>
@@ -39,13 +40,17 @@
struct s3c_adc_client {
struct platform_device *pdev;
struct list_head pend;
+ wait_queue_head_t *wait;
unsigned int nr_samples;
+ int result;
unsigned char is_ts;
unsigned char channel;
+ unsigned int selected;
- void (*select_cb)(unsigned selected);
- void (*convert_cb)(unsigned val1, unsigned val2,
+ void (*select_cb)(struct s3c_adc_client *c, unsigned selected);
+ void (*convert_cb)(struct s3c_adc_client *c,
+ unsigned val1, unsigned val2,
unsigned *samples_left);
};
@@ -58,20 +63,31 @@ struct adc_device {
void __iomem *regs;
unsigned int prescale;
+ unsigned int delay;
int irq;
};
static struct adc_device *adc_dev;
+static struct work_struct resume_work;
+
static LIST_HEAD(adc_pending);
#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+#define AUTOPST (S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | S3C2410_ADCTSC_AUTO_PST | \
+ S3C2410_ADCTSC_XY_PST(0))
+
static inline void s3c_adc_convert(struct adc_device *adc)
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
+ if (adc->cur->is_ts)
+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+ adc->regs + S3C2410_ADCTSC);
+
con |= S3C2410_ADCCON_ENABLE_START;
writel(con, adc->regs + S3C2410_ADCCON);
}
@@ -81,7 +97,10 @@ static inline void s3c_adc_select(struct adc_device *adc,
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
- client->select_cb(1);
+ if (!client->selected) {
+ client->selected = 1;
+ client->select_cb(client, 1);
+ }
con &= ~S3C2410_ADCCON_MUXMASK;
con &= ~S3C2410_ADCCON_STDBM;
@@ -105,12 +124,9 @@ static void s3c_adc_try(struct adc_device *adc)
{
struct s3c_adc_client *next = adc->ts_pend;
- if (!next && !list_empty(&adc_pending)) {
+ if (!next && !list_empty(&adc_pending))
next = list_first_entry(&adc_pending,
struct s3c_adc_client, pend);
- list_del(&next->pend);
- } else
- adc->ts_pend = NULL;
if (next) {
adc_dbg(adc, "new client is %p\n", next);
@@ -153,25 +169,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
}
EXPORT_SYMBOL_GPL(s3c_adc_start);
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+ unsigned v, unsigned u, unsigned *left)
+{
+ client->result = v;
+ wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+ int ret;
+
+ client->convert_cb = s3c_convert_done;
+ client->wait = &wake;
+ client->result = -1;
+
+ ret = s3c_adc_start(client, ch, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+ if (client->result < 0) {
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ client->convert_cb = NULL;
+ return client->result;
+
+err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_read);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+ unsigned select)
{
}
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned int selected),
- void (*conv)(unsigned d0, unsigned d1,
+ void (*select)(struct s3c_adc_client *client,
+ unsigned int selected),
+ void (*conv)(struct s3c_adc_client *client,
+ unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts)
{
struct s3c_adc_client *client;
WARN_ON(!pdev);
- WARN_ON(!conv);
if (!select)
select = s3c_adc_default_select;
- if (!conv || !pdev)
+ if (!pdev)
return ERR_PTR(-EINVAL);
client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,18 +282,27 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
client->nr_samples--;
- (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+ if (client->convert_cb)
+ (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+ &client->nr_samples);
if (client->nr_samples > 0) {
/* fire another conversion for this */
-
- client->select_cb(1);
+ client->selected = 1;
+ client->select_cb(client, 1);
s3c_adc_convert(adc);
} else {
local_irq_save(flags);
- (client->select_cb)(0);
+ client->selected = 0;
+ if (!adc->cur->is_ts)
+ list_del(&adc->cur->pend);
+ else
+ adc->ts_pend = NULL;
adc->cur = NULL;
+ (client->select_cb)(client, 0);
+
s3c_adc_try(adc);
local_irq_restore(flags);
}
@@ -264,6 +325,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
adc->pdev = pdev;
adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+ adc->delay = 0x2710;
adc->irq = platform_get_irq(pdev, 1);
if (adc->irq <= 0) {
@@ -303,6 +365,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
+ writel(adc->delay, adc->regs + S3C2410_ADCDLY);
dev_info(dev, "attached adc driver\n");
@@ -346,18 +409,42 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
writel(con, adc->regs + S3C2410_ADCCON);
clk_disable(adc->clk);
+ disable_irq(IRQ_ADC);
+ if (!list_empty(&adc_pending) || adc->ts_pend)
+ dev_info(&pdev->dev, "We still have adc clients pending\n");
return 0;
}
+/* It seems this is not needed. This is under upstream review now. */
+static void adc_resume_work(struct work_struct *work)
+{
+ if (!adc_dev) /* Have no ADC here */
+ return;
+
+ if (!list_empty(&adc_pending) || adc_dev->ts_pend)
+ /* We still have adc clients pending */
+ s3c_adc_try(adc_dev);
+}
+
static int s3c_adc_resume(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
+ enable_irq(IRQ_ADC);
clk_enable(adc->clk);
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
+ writel(adc->delay, adc->regs + S3C2410_ADCDLY);
+
+ /* Schedule task if there are clients pending. */
+ if (!list_empty(&adc_pending) || adc_dev->ts_pend) {
+ INIT_WORK(&resume_work, adc_resume_work);
+ if (!schedule_work(&resume_work))
+ dev_err(&pdev->dev,
+ "Failed to schedule adc_resume work!\n");
+ }
return 0;
}
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 00000000000..a9276667c2f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+ seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+ f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+ struct s3c_cpufreq_config *cfg;
+ struct s3c_cpufreq_board *brd;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ brd = cfg->board;
+ if (!brd) {
+ seq_printf(seq, "no board definition set?\n");
+ return 0;
+ }
+
+ seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+ seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+ seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+ show_max(seq, &brd->max);
+
+
+ return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+ .open = fops_board_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+ struct s3c_cpufreq_config *cfg;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk);
+ seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n",
+ cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+ seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk);
+ seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+ seq_printf(seq, "\n");
+
+ show_max(seq, &cfg->max);
+
+ seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+ cfg->divs.h_divisor, cfg->divs.p_divisor,
+ cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+ seq_printf(seq, "\n");
+
+ seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+ return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+ .open = fops_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+ void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+ struct s3c_cpufreq_config *cfg;
+ struct s3c_iotimings *iot;
+ union s3c_iobank *iob;
+ int bank;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ show_bank = cfg->info->debug_io_show;
+ if (!show_bank) {
+ seq_printf(seq, "no code to show bank timing\n");
+ return 0;
+ }
+
+ iot = s3c_cpufreq_getiotimings();
+ if (!iot) {
+ seq_printf(seq, "no io timings registered\n");
+ return 0;
+ }
+
+ seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ iob = &iot->bank[bank];
+
+ seq_printf(seq, "bank %d: ", bank);
+
+ if (!iob->io_2410) {
+ seq_printf(seq, "nothing set\n");
+ continue;
+ }
+
+ show_bank(seq, cfg, iob);
+ }
+
+ return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+ .open = fops_io_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+ dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+ if (IS_ERR(dbgfs_root)) {
+ printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+ return PTR_ERR(dbgfs_root);
+ }
+
+ dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+ NULL, &fops_io);
+
+ dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+ NULL, &fops_info);
+
+ dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+ NULL, &fops_board);
+
+ return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 00000000000..4f1b789a117
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,716 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+ return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+ return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long fclk, pclk, hclk, armclk;
+
+ cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+ cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+ cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+ cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+ cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+ cfg->pll.frequency = fclk;
+
+ cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+ cfg->divs.h_divisor = fclk / hclk;
+ cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long pll = cfg->pll.frequency;
+
+ cfg->freq.fclk = pll;
+ cfg->freq.hclk = pll / cfg->divs.h_divisor;
+ cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+ /* convert hclk into 10ths of nanoseconds for io calcs */
+ cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+ int diff_cur = abs(target - c);
+ int diff_new = abs(target - n);
+
+ return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+ struct s3c_cpufreq_config *cfg)
+{
+ s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+ pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+ cfg->freq.hclk, cfg->divs.h_divisor,
+ cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+ if (cfg->info->set_iotiming)
+ (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+ if (cfg->info->calc_iotiming)
+ return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+ return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+ cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+ unsigned int freq)
+{
+ clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ struct cpufreq_frequency_table *pll)
+{
+ struct s3c_cpufreq_freqs freqs;
+ struct s3c_cpufreq_config cpu_new;
+ unsigned long flags;
+
+ cpu_new = cpu_cur; /* copy new from current */
+
+ s3c_cpufreq_show("cur", &cpu_cur);
+
+ /* TODO - check for DMA currently outstanding */
+
+ cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+ if (pll)
+ freqs.pll_changing = 1;
+
+ /* update our frequencies */
+
+ cpu_new.freq.armclk = target_freq;
+ cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+ if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+ printk(KERN_ERR "no divisors for %d\n", target_freq);
+ goto err_notpossible;
+ }
+
+ s3c_freq_dbg("%s: got divs\n", __func__);
+
+ s3c_cpufreq_calc(&cpu_new);
+
+ s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+ if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+ if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+ printk(KERN_ERR "%s: no IO timings\n", __func__);
+ goto err_notpossible;
+ }
+ }
+
+ s3c_cpufreq_show("new", &cpu_new);
+
+ /* setup our cpufreq parameters */
+
+ freqs.old = cpu_cur.freq;
+ freqs.new = cpu_new.freq;
+
+ freqs.freqs.cpu = 0;
+ freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+ freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+ /* update f/h/p clock settings before we issue the change
+ * notification, so that drivers do not need to do anything
+ * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+ s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+ s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+ s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+ s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+ /* start the frequency change */
+
+ if (policy)
+ cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+ /* If hclk is staying the same, then we do not need to
+ * re-write the IO or the refresh timings whilst we are changing
+ * speed. */
+
+ local_irq_save(flags);
+
+ /* is our memory clock slowing down? */
+ if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+ s3c_cpufreq_setrefresh(&cpu_new);
+ s3c_cpufreq_setio(&cpu_new);
+ }
+
+ if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+ /* not changing PLL, just set the divisors */
+
+ s3c_cpufreq_setdivs(&cpu_new);
+ } else {
+ if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+ /* slow the cpu down, then set divisors */
+
+ s3c_cpufreq_setfvco(&cpu_new);
+ s3c_cpufreq_setdivs(&cpu_new);
+ } else {
+ /* set the divisors, then speed up */
+
+ s3c_cpufreq_setdivs(&cpu_new);
+ s3c_cpufreq_setfvco(&cpu_new);
+ }
+ }
+
+ /* did our memory clock speed up */
+ if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+ s3c_cpufreq_setrefresh(&cpu_new);
+ s3c_cpufreq_setio(&cpu_new);
+ }
+
+ /* update our current settings */
+ cpu_cur = cpu_new;
+
+ local_irq_restore(flags);
+
+ /* notify everyone we've done this */
+ if (policy)
+ cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+ s3c_freq_dbg("%s: finished\n", __func__);
+ return 0;
+
+ err_notpossible:
+ printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_frequency_table *pll;
+ unsigned int index;
+
+ /* avoid repeated calls which cause a needless amout of duplicated
+ * logging output (and CPU time as the calculation process is
+ * done) */
+ if (target_freq == last_target)
+ return 0;
+
+ last_target = target_freq;
+
+ s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+ __func__, policy, target_freq, relation);
+
+ if (ftab) {
+ if (cpufreq_frequency_table_target(policy, ftab,
+ target_freq, relation,
+ &index)) {
+ s3c_freq_dbg("%s: table failed\n", __func__);
+ return -EINVAL;
+ }
+
+ s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+ target_freq, index, ftab[index].frequency);
+ target_freq = ftab[index].frequency;
+ }
+
+ target_freq *= 1000; /* convert target to Hz */
+
+ /* find the settings for our new frequency */
+
+ if (!pll_reg || cpu_cur.lock_pll) {
+ /* either we've not got any PLL values, or we've locked
+ * to the current one. */
+ pll = NULL;
+ } else {
+ struct cpufreq_policy tmp_policy;
+ int ret;
+
+ /* we keep the cpu pll table in Hz, to ensure we get an
+ * accurate value for the PLL output. */
+
+ tmp_policy.min = policy->min * 1000;
+ tmp_policy.max = policy->max * 1000;
+ tmp_policy.cpu = policy->cpu;
+
+ /* cpufreq_frequency_table_target uses a pointer to 'index'
+ * which is the number of the table entry, not the value of
+ * the table entry's index field. */
+
+ ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+ target_freq, relation,
+ &index);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: no PLL available\n", __func__);
+ goto err_notpossible;
+ }
+
+ pll = pll_reg + index;
+
+ s3c_freq_dbg("%s: target %u => %u\n",
+ __func__, target_freq, pll->frequency);
+
+ target_freq = pll->frequency;
+ }
+
+ return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+ printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+ return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, name);
+ if (IS_ERR(clk))
+ printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+ return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+ printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->cur = s3c_cpufreq_get(0);
+ policy->min = policy->cpuinfo.min_freq = 0;
+ policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /* feed the latency information from the cpu driver */
+ policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+ if (ftab)
+ cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+ return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+ _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+ _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+ clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+ clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+ clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+ clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+ if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+ IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+ printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+ return -ENOENT;
+ }
+
+ printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+ clk_get_rate(clk_fclk) / 1000,
+ clk_get_rate(clk_hclk) / 1000,
+ clk_get_rate(clk_pclk) / 1000,
+ clk_get_rate(clk_arm) / 1000);
+
+ return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+ suspend_pll.frequency = clk_get_rate(_clk_mpll);
+ suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+ suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+ return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+ last_target = ~0; /* invalidate last_target setting */
+
+ /* first, find out what speed we resumed at. */
+ s3c_cpufreq_resume_clocks();
+
+ /* whilst we will be called later on, we try and re-set the
+ * cpu frequencies as soon as possible so that we do not end
+ * up resuming devices and then immediatley having to re-set
+ * a number of settings once these devices have restarted.
+ *
+ * as a note, it is expected devices are not used until they
+ * have been un-suspended and at that time they should have
+ * used the updated clock settings.
+ */
+
+ ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = s3c_cpufreq_verify,
+ .target = s3c_cpufreq_target,
+ .get = s3c_cpufreq_get,
+ .init = s3c_cpufreq_init,
+ .suspend = s3c_cpufreq_suspend,
+ .resume = s3c_cpufreq_resume,
+ .name = "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+ if (!info || !info->name) {
+ printk(KERN_ERR "%s: failed to pass valid information\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+ info->name);
+
+ /* check our driver info has valid data */
+
+ BUG_ON(info->set_refresh == NULL);
+ BUG_ON(info->set_divs == NULL);
+ BUG_ON(info->calc_divs == NULL);
+
+ /* info->set_fvco is optional, depending on whether there
+ * is a need to set the clock code. */
+
+ cpu_cur.info = info;
+
+ /* Note, driver registering should probably update locktime */
+
+ return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+ struct s3c_cpufreq_board *ours;
+
+ if (!board) {
+ printk(KERN_INFO "%s: no board data\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Copy the board information so that each board can make this
+ * initdata. */
+
+ ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+ if (ours == NULL) {
+ printk(KERN_ERR "%s: no memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ *ours = *board;
+ cpu_cur.board = ours;
+
+ return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+ int ret;
+
+ if (!cpu_cur.info->get_iotiming) {
+ printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+ return -ENOENT;
+ }
+
+ printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+ ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+ if (ret)
+ printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+ return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+ struct s3c_freq *a, struct s3c_freq *b)
+{
+ dst->fclk = do_min(a->fclk, b->fclk);
+ dst->hclk = do_min(a->hclk, b->hclk);
+ dst->pclk = do_min(a->pclk, b->pclk);
+ dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+ u32 result;
+
+ result = freq * time_us;
+ result = DIV_ROUND_UP(result, 1000 * 1000);
+
+ return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+ unsigned int bits = cpu_cur.info->locktime_bits;
+ u32 rate = (u32)clk_get_rate(_clk_xtal);
+ u32 val;
+
+ if (bits == 0) {
+ WARN_ON(1);
+ return;
+ }
+
+ val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+ val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+ printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+ __raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+ int size, ret;
+
+ if (!cpu_cur.info->calc_freqtable)
+ return -EINVAL;
+
+ kfree(ftab);
+ ftab = NULL;
+
+ size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+ size++;
+
+ ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+ if (!ftab) {
+ printk(KERN_ERR "%s: no memory for tables\n", __func__);
+ return -ENOMEM;
+ }
+
+ ftab_size = size;
+
+ ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+ s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+ return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+ int ret = 0;
+
+ if (cpu_cur.info && cpu_cur.board) {
+ ret = s3c_cpufreq_initclks();
+ if (ret)
+ goto out;
+
+ /* get current settings */
+ s3c_cpufreq_getcur(&cpu_cur);
+ s3c_cpufreq_show("cur", &cpu_cur);
+
+ if (cpu_cur.board->auto_io) {
+ ret = s3c_cpufreq_auto_io();
+ if (ret) {
+ printk(KERN_ERR "%s: failed to get io timing\n",
+ __func__);
+ goto out;
+ }
+ }
+
+ if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+ printk(KERN_ERR "%s: no IO support registered\n",
+ __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (!cpu_cur.info->need_pll)
+ cpu_cur.lock_pll = 1;
+
+ s3c_cpufreq_update_loctkime();
+
+ s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+ &cpu_cur.info->max);
+
+ if (cpu_cur.info->calc_freqtable)
+ s3c_cpufreq_build_freq();
+
+ ret = cpufreq_register_driver(&s3c24xx_driver);
+ }
+
+ out:
+ return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+ unsigned int plls_no)
+{
+ struct cpufreq_frequency_table *vals;
+ unsigned int size;
+
+ size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+ vals = kmalloc(size, GFP_KERNEL);
+ if (vals) {
+ memcpy(vals, plls, size);
+ pll_reg = vals;
+
+ /* write a terminating entry, we don't store it in the
+ * table that is stored in the kernel */
+ vals += plls_no;
+ vals->frequency = CPUFREQ_TABLE_END;
+
+ printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+ } else
+ printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+ return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da1..4af9dd94879 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -61,6 +61,7 @@ static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
+static const char name_s3c2442b[] = "S3C2442B";
static const char name_s3c2443[] = "S3C2443";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
@@ -81,7 +82,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
- .init = s3c2410_init,
+ .init = s3c2410a_init,
.name = name_s3c2410a
},
{
@@ -112,6 +113,15 @@ static struct cpu_table cpu_ids[] __initdata = {
.name = name_s3c2442
},
{
+ .idcode = 0x32440aab,
+ .idmask = 0xffffffff,
+ .map_io = s3c244x_map_io,
+ .init_clocks = s3c244x_init_clocks,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2442_init,
+ .name = name_s3c2442b
+ },
+ {
.idcode = 0x32412001,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..9ef0e97d56e 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,8 +26,12 @@
#include <asm/mach/irq.h>
#include <mach/fb.h>
#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
+#include <mach/ts.h>
+
#include <plat/regs-serial.h>
#include <plat/udc.h>
@@ -180,24 +184,23 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
}
}
-/* NAND Controller */
+/* Touchscreen */
-static struct resource s3c_nand_resource[] = {
- [0] = {
- .start = S3C24XX_PA_NAND,
- .end = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
- .flags = IORESOURCE_MEM,
- }
+struct platform_device s3c_device_ts = {
+ .name = "s3c2410-ts",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
};
-struct platform_device s3c_device_nand = {
- .name = "s3c2410-nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_nand_resource),
- .resource = s3c_nand_resource,
-};
+static struct s3c2410_ts_mach_info s3c2410ts_info;
-EXPORT_SYMBOL(s3c_device_nand);
+void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+ memcpy(&s3c2410ts_info, hard_s3c2410ts_info,
+ sizeof(struct s3c2410_ts_mach_info));
+ s3c_device_ts.dev.platform_data = &s3c2410ts_info;
+}
+EXPORT_SYMBOL(set_s3c2410ts_info);
/* USB Device (Gadget)*/
@@ -348,7 +351,7 @@ struct platform_device s3c_device_adc = {
/* HWMON */
struct platform_device s3c_device_hwmon = {
- .name = "s3c24xx-hwmon",
+ .name = "s3c-hwmon",
.id = -1,
.dev.parent = &s3c_device_adc.dev,
};
@@ -473,4 +476,52 @@ struct platform_device s3c_device_camif = {
EXPORT_SYMBOL(s3c_device_camif);
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+ [0] = {
+ .start = S3C2440_PA_AC97,
+ .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3C244x_AC97,
+ .end = IRQ_S3C244x_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "PCM out",
+ .start = DMACH_PCM_OUT,
+ .end = DMACH_PCM_OUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .name = "PCM in",
+ .start = DMACH_PCM_IN,
+ .end = DMACH_PCM_IN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .name = "Mic in",
+ .start = DMACH_MIC_IN,
+ .end = DMACH_MIC_IN,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+ .name = "s3c-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ac97_resource),
+ .resource = s3c_ac97_resource,
+ .dev = {
+ .dma_mask = &s3c_device_ac97_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
#endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 196b1912365..f046f8c5108 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -208,14 +208,14 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
{
unsigned long reload;
- pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
- buf, (unsigned long)buf->data, buf->size);
-
if (buf == NULL) {
dmawarn("buffer is NULL\n");
return -EINVAL;
}
+ pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+ buf, (unsigned long)buf->data, buf->size);
+
/* check the state of the channel before we do anything */
if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 95df059b5a1..5467470badf 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -29,6 +29,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/gpio-fns.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961d326..c2dd900660b 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -26,6 +26,7 @@
#include <plat/pm.h>
#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
{
@@ -160,8 +161,16 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.label = "GPIOH",
.ngpio = 11,
},
- },
-};
+ }, {
+ .base = S3C2440_GPJCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2440_GPJ0,
+ .owner = THIS_MODULE,
+ .label = "GPIOJ",
+ .ngpio = 11,
+ },
+ },};
static __init int s3c24xx_gpiolib_init(void)
{
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 00000000000..c776120b99e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,287 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO (8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+ unsigned long bankcon;
+ unsigned int tacp;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh; /* nCS hold afrer nOE/nWE */
+ unsigned int tcah; /* Address hold after nCS */
+ unsigned char nwait_en; /* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+ unsigned int idcy;
+ unsigned int wstrd;
+ unsigned int wstwr;
+ unsigned int wstoen;
+ unsigned int wstwen;
+ unsigned int wstbrd;
+
+ /* register cache */
+ unsigned char smbidcyr;
+ unsigned char smbwstrd;
+ unsigned char smbwstwr;
+ unsigned char smbwstoen;
+ unsigned char smbwstwen;
+ unsigned char smbwstbrd;
+};
+
+union s3c_iobank {
+ struct s3c2410_iobank_timing *io_2410;
+ struct s3c2412_iobank_timing *io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+ union s3c_iobank bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+ struct s3c_pllval *vals;
+ int size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+ struct s3c_freq freq;
+ struct s3c_freq max;
+ struct cpufreq_frequency_table pll;
+ struct s3c_clkdivs divs;
+ struct s3c_cpufreq_info *info; /* for core, not drivers */
+ struct s3c_cpufreq_board *board;
+
+ unsigned int lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * any frequency changes. This is really only need by devices like the
+ * S3C2410 where there is no or limited divider between the PLL and the
+ * ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ * from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ * from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ * current frequency configuration. If the table passed in is NULL,
+ * then the return is the number of elements to be filled for allocation
+ * of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+ const char *name;
+ struct s3c_freq max;
+
+ unsigned int latency;
+
+ unsigned int locktime_m;
+ unsigned int locktime_u;
+ unsigned char locktime_bits;
+
+ unsigned int need_pll:1;
+
+ /* driver routines */
+
+ void (*resume_clocks)(void);
+
+ int (*get_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ void (*set_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *t,
+ size_t table_size);
+
+ void (*debug_io_show)(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+ void (*set_refresh)(struct s3c_cpufreq_config *cfg);
+ void (*set_fvco)(struct s3c_cpufreq_config *cfg);
+ void (*set_divs)(struct s3c_cpufreq_config *cfg);
+ int (*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+#ifdef CONFIG_S3C2410_IOTIMING
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+#else
+#define s3c2410_iotiming_calc NULL
+#define s3c2410_iotiming_get NULL
+#define s3c2410_iotiming_set NULL
+#endif /* CONFIG_S3C2410_IOTIMING */
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+ int index, size_t table_size,
+ unsigned int freq)
+{
+ if (index < 0)
+ return index;
+
+ if (table) {
+ if (index >= table_size)
+ return -ENOMEM;
+
+ s3c_freq_dbg("%s: { %d = %u kHz }\n",
+ __func__, index, freq);
+
+ table[index].index = index;
+ table[index].frequency = freq;
+ }
+
+ return index + 1;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 00000000000..8521b8372c5
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
index 69e1be8bec3..11a866466d8 100644
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -12,6 +12,7 @@
#include <linux/io.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
@@ -31,8 +32,15 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
{
unsigned long mask;
unsigned long submask;
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
submask = __raw_readl(S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
@@ -45,6 +53,9 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
/* write back masks */
__raw_writel(submask, S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
}
@@ -53,8 +64,15 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
{
unsigned long mask;
unsigned long submask;
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
submask = __raw_readl(S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
@@ -63,6 +81,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
/* write back masks */
__raw_writel(submask, S3C2410_INTSUBMSK);
__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
}
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 2d0852ac3b2..c2cef613968 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -2,8 +2,11 @@
#define _ARCH_MCI_H
struct s3c24xx_mci_pdata {
+ unsigned int no_wprotect : 1;
+ unsigned int no_detect : 1;
unsigned int wprotect_invert : 1;
unsigned int detect_invert : 1; /* set => detect active high. */
+ unsigned int use_dma : 1;
unsigned int gpio_detect;
unsigned int gpio_wprotect;
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e29759..82ab4aad1bb 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
#ifdef CONFIG_CPU_S3C2410
extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
extern void s3c2410_map_io(void);
@@ -26,6 +27,7 @@ extern void s3c2410_init_clocks(int xtal);
#define s3c2410_init_uarts NULL
#define s3c2410_map_io NULL
#define s3c2410_init NULL
+#define s3c2410a_init NULL
#endif
extern int s3c2410_baseclk_add(void);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad..14aa528d985 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -28,6 +28,8 @@
#include <asm/mach/irq.h>
#include <plat/regs-irqtype.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
@@ -37,12 +39,20 @@ static void
s3c_irq_mask(unsigned int irqno)
{
unsigned long mask;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
irqno -= IRQ_EINT0;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
mask |= 1UL << irqno;
__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
}
static inline void
@@ -59,9 +69,19 @@ s3c_irq_maskack(unsigned int irqno)
{
unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
unsigned long mask;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
+
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
__raw_writel(mask|bitval, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
__raw_writel(bitval, S3C2410_SRCPND);
__raw_writel(bitval, S3C2410_INTPND);
@@ -72,15 +92,25 @@ static void
s3c_irq_unmask(unsigned int irqno)
{
unsigned long mask;
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
irqdbf2("s3c_irq_unmask %d\n", irqno);
irqno -= IRQ_EINT0;
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
mask &= ~(1UL << irqno);
__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
}
struct irq_chip s3c_irq_level_chip = {
@@ -493,6 +523,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
}
}
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+ u32 intmod;
+ unsigned offs;
+
+ if (on) {
+ offs = irq - FIQ_START;
+ if (offs > 31)
+ return -EINVAL;
+
+ intmod = 1 << offs;
+ } else {
+ intmod = 0;
+ }
+
+ __raw_writel(intmod, S3C2410_INTMOD);
+ return 0;
+}
+#endif
+
+
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
@@ -505,6 +567,10 @@ void __init s3c24xx_init_irq(void)
int irqno;
int i;
+#ifdef CONFIG_FIQ
+ init_FIQ();
+#endif
+
irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
/* first, clear all interrupts pending... */
@@ -523,26 +589,26 @@ void __init s3c24xx_init_irq(void)
last = 0;
for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_INTPND);
+ pend = __raw_readl(S3C2410_SUBSRCPND);
if (pend == 0 || pend == last)
break;
- __raw_writel(pend, S3C2410_SRCPND);
- __raw_writel(pend, S3C2410_INTPND);
- printk("irq: clearing pending status %08x\n", (int)pend);
+ printk("irq: clearing subpending status %08x\n", (int)pend);
+ __raw_writel(pend, S3C2410_SUBSRCPND);
last = pend;
}
last = 0;
for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_SUBSRCPND);
+ pend = __raw_readl(S3C2410_INTPND);
if (pend == 0 || pend == last)
break;
- printk("irq: clearing subpending status %08x\n", (int)pend);
- __raw_writel(pend, S3C2410_SUBSRCPND);
+ __raw_writel(pend, S3C2410_SRCPND);
+ __raw_writel(pend, S3C2410_INTPND);
+ printk("irq: clearing pending status %08x\n", (int)pend);
last = pend;
}
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
deleted file mode 100644
index 82a6d4de02a..00000000000
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/* arch/arm/plat-s3c24xx/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C24XX PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-
-struct pwm_device {
- struct list_head list;
- struct platform_device *pdev;
-
- struct clk *clk_div;
- struct clk *clk;
- const char *label;
-
- unsigned int period_ns;
- unsigned int duty_ns;
-
- unsigned char tcon_base;
- unsigned char running;
- unsigned char use_count;
- unsigned char pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-/* Standard setup for a timer block. */
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq) \
- (struct resource [TIMER_RESOURCE_SIZE]) { \
- [0] = { \
- .start = _irq, \
- .end = _irq, \
- .flags = IORESOURCE_IRQ \
- } \
- }
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq) \
- .name = "s3c24xx-pwm", \
- .id = _tmr_no, \
- .num_resources = TIMER_RESOURCE_SIZE, \
- .resource = TIMER_RESOURCE(_tmr_no, _irq), \
-
-/* since we already have an static mapping for the timer, we do not
- * bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
- [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
- [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
- [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
- [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
- [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
- return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int found = 0;
-
- mutex_lock(&pwm_lock);
-
- list_for_each_entry(pwm, &pwm_list, list) {
- if (pwm->pwm_id == pwm_id) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- if (pwm->use_count == 0) {
- pwm->use_count = 1;
- pwm->label = label;
- } else
- pwm = ERR_PTR(-EBUSY);
- } else
- pwm = ERR_PTR(-ENOENT);
-
- mutex_unlock(&pwm_lock);
- return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
-
- if (pwm->use_count) {
- pwm->use_count--;
- pwm->label = NULL;
- } else
- printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
- mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
- unsigned long flags;
- unsigned long tcon;
-
- local_irq_save(flags);
-
- tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_start(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- local_irq_restore(flags);
-
- pwm->running = 1;
- return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- unsigned long flags;
- unsigned long tcon;
-
- local_irq_save(flags);
-
- tcon = __raw_readl(S3C2410_TCON);
- tcon &= ~pwm_tcon_start(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- local_irq_restore(flags);
-
- pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
- unsigned long tin_parent_rate;
- unsigned int div;
-
- tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
- pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
- for (div = 2; div <= 16; div *= 2) {
- if ((tin_parent_rate / (div << 16)) < freq)
- return tin_parent_rate / div;
- }
-
- return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- unsigned long tin_rate;
- unsigned long tin_ns;
- unsigned long period;
- unsigned long flags;
- unsigned long tcon;
- unsigned long tcnt;
- long tcmp;
-
- /* We currently avoid using 64bit arithmetic by using the
- * fact that anything faster than 1Hz is easily representable
- * by 32bits. */
-
- if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
- return -ERANGE;
-
- if (duty_ns > period_ns)
- return -EINVAL;
-
- if (period_ns == pwm->period_ns &&
- duty_ns == pwm->duty_ns)
- return 0;
-
- /* The TCMP and TCNT can be read without a lock, they're not
- * shared between the timers. */
-
- tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
- tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
- period = NS_IN_HZ / period_ns;
-
- pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
- duty_ns, period_ns, period);
-
- /* Check to see if we are changing the clock rate of the PWM */
-
- if (pwm->period_ns != period_ns) {
- if (pwm_is_tdiv(pwm)) {
- tin_rate = pwm_calc_tin(pwm, period);
- clk_set_rate(pwm->clk_div, tin_rate);
- } else
- tin_rate = clk_get_rate(pwm->clk);
-
- pwm->period_ns = period_ns;
-
- pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
- tin_ns = NS_IN_HZ / tin_rate;
- tcnt = period_ns / tin_ns;
- } else
- tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
- /* Note, counters count down */
-
- tcmp = duty_ns / tin_ns;
- tcmp = tcnt - tcmp;
- /* the pwm hw only checks the compare register after a decrement,
- so the pin never toggles if tcmp = tcnt */
- if (tcmp == tcnt)
- tcmp--;
-
- pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
- if (tcmp < 0)
- tcmp = 0;
-
- /* Update the PWM register block. */
-
- local_irq_save(flags);
-
- __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
- __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
- tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_manulupdate(pwm);
- tcon |= pwm_tcon_autoreload(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- tcon &= ~pwm_tcon_manulupdate(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
- pwm->duty_ns = -1;
- pwm->period_ns = -1;
-
- mutex_lock(&pwm_lock);
- list_add_tail(&pwm->list, &pwm_list);
- mutex_unlock(&pwm_lock);
-
- return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct pwm_device *pwm;
- unsigned long flags;
- unsigned long tcon;
- unsigned int id = pdev->id;
- int ret;
-
- if (id == 4) {
- dev_err(dev, "TIMER4 is currently not supported\n");
- return -ENXIO;
- }
-
- pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (pwm == NULL) {
- dev_err(dev, "failed to allocate pwm_device\n");
- return -ENOMEM;
- }
-
- pwm->pdev = pdev;
- pwm->pwm_id = id;
-
- /* calculate base of control bits in TCON */
- pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
- pwm->clk = clk_get(dev, "pwm-tin");
- if (IS_ERR(pwm->clk)) {
- dev_err(dev, "failed to get pwm tin clk\n");
- ret = PTR_ERR(pwm->clk);
- goto err_alloc;
- }
-
- pwm->clk_div = clk_get(dev, "pwm-tdiv");
- if (IS_ERR(pwm->clk_div)) {
- dev_err(dev, "failed to get pwm tdiv clk\n");
- ret = PTR_ERR(pwm->clk_div);
- goto err_clk_tin;
- }
-
- local_irq_save(flags);
-
- tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_invert(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- local_irq_restore(flags);
-
-
- ret = pwm_register(pwm);
- if (ret) {
- dev_err(dev, "failed to register pwm\n");
- goto err_clk_tdiv;
- }
-
- pwm_dbg(pwm, "config bits %02x\n",
- (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
- dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
- clk_get_rate(pwm->clk),
- clk_get_rate(pwm->clk_div),
- pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
- platform_set_drvdata(pdev, pwm);
- return 0;
-
- err_clk_tdiv:
- clk_put(pwm->clk_div);
-
- err_clk_tin:
- clk_put(pwm->clk);
-
- err_alloc:
- kfree(pwm);
- return ret;
-}
-
-static int s3c_pwm_remove(struct platform_device *pdev)
-{
- struct pwm_device *pwm = platform_get_drvdata(pdev);
-
- clk_put(pwm->clk_div);
- clk_put(pwm->clk);
- kfree(pwm);
-
- return 0;
-}
-
-static struct platform_driver s3c_pwm_driver = {
- .driver = {
- .name = "s3c24xx-pwm",
- .owner = THIS_MODULE,
- },
- .probe = s3c_pwm_probe,
- .remove = __devexit_p(s3c_pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
- int ret;
-
- clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
- clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
- if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
- printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
- return -EINVAL;
- }
-
- ret = platform_driver_register(&s3c_pwm_driver);
- if (ret)
- printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
- return ret;
-}
-
-arch_initcall(pwm_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 00000000000..43ea80190d8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+ unsigned long refval;
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh = (1 << 11) + 1 - refresh;
+
+ s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+ refval = __raw_readl(S3C2410_REFRESH);
+ refval &= ~((1 << 12) - 1);
+ refval |= refresh;
+ __raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+ __raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 00000000000..d0a3a145cd4
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,477 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = timings->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+ "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+ }
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+ return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+ return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+ if (cyc == 0)
+ return 0;
+
+ return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+ unsigned long *v, int shift)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+ __func__, cyc, hclk_tns, shift, div);
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+ case 1:
+ val = 1;
+ break;
+ case 2:
+ val = 2;
+ break;
+ case 3:
+ case 4:
+ val = 3;
+ break;
+ default:
+ return -1;
+ }
+
+ *v |= val << shift;
+ return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+ /* Currently no support for Tacp calculations. */
+ return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+ unsigned long hclk_tns, unsigned long *v)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+ __func__, cyc, nwait_en, hclk_tns, div);
+
+ /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+ if (nwait_en && div < 4)
+ div = 4;
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ val = div - 1;
+ break;
+
+ case 5:
+ case 6:
+ val = 4;
+ break;
+
+ case 7:
+ case 8:
+ val = 5;
+ break;
+
+ case 9:
+ case 10:
+ val = 6;
+ break;
+
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ val = 7;
+ break;
+
+ default:
+ return -1;
+ }
+
+ *v |= val << 8;
+ return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned long res;
+ int ret;
+
+ res = bt->bankcon;
+ res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+ /* tacp: 2,3,4,5 */
+ /* tcah: 0,1,2,4 */
+ /* tcoh: 0,1,2,4 */
+ /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+ /* tcos: 0,1,2,4 */
+ /* tacs: 0,1,2,4 */
+
+ ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+ ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+ ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+ ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+ if (ret)
+ return -EINVAL;
+
+ ret |= calc_tacp(bt->tacp, hclk, &res);
+ ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+ if (ret)
+ return -EINVAL;
+
+ bt->bankcon = res;
+ return 0;
+}
+
+static unsigned int tacc_tab[] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 3,
+ [3] = 4,
+ [4] = 6,
+ [5] = 9,
+ [6] = 10,
+ [7] = 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 7;
+ return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 3;
+ return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+
+ bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2410_iobank_timing *bt = iob->io_2410;
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh;
+ unsigned int tcah;
+
+ seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+ tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+ seq_printf(seq,
+ "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+
+ seq_printf(seq,
+ "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(tacs),
+ print_ns(tcos),
+ print_ns(tacc),
+ print_ns(tcoh),
+ print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+ bt = iot->bank[bank].io_2410;
+
+ if (!bt)
+ continue;
+
+ bt->bankcon = bankcon;
+
+ ret = s3c2410_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+
+ s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+ __func__, bank, bt->bankcon);
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ __raw_writel(bt->bankcon, bank_reg(bank));
+ }
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ unsigned long bwscon;
+ int bank;
+
+ bwscon = __raw_readl(S3C2410_BWSCON);
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+
+ if (!bank_is_io(bankcon))
+ continue;
+
+ s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+ __func__, bank, bankcon);
+
+ bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+ if (!bt) {
+ printk(KERN_ERR "%s: no memory for bank\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* find out in nWait is enabled for bank. */
+
+ if (bank != 0) {
+ unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank);
+ if (tmp & S3C2410_BWSCON_WS)
+ bt->nwait_en = 1;
+ }
+
+ timings->bank[bank].io_2410 = bt;
+ bt->bankcon = bankcon;
+
+ s3c2410_iotiming_getbank(cfg, bt);
+ }
+
+ s3c2410_print_timing("get", timings);
+ return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 00000000000..fd45e47facb
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,285 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ unsigned int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+ }
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+ return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+ unsigned int *err)
+{
+ unsigned int ret = to_div(hwtm, clk_tns);
+
+ if (ret > 0xf)
+ *err = -EINVAL;
+
+ return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt)
+{
+ unsigned int hclk = cfg->freq.hclk_tns;
+ int err = 0;
+
+ bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+ bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+ bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+ bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+ bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+ bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+ return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+ seq_printf(seq,
+ "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ ret = s3c2412_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ void __iomem *regs;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ regs = S3C2412_SSMC_BANK(bank);
+
+ __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+ __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+ __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+ __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+ __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+ __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+ }
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+ return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt,
+ unsigned int bank)
+{
+ unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */
+ void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+ bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+ bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+ bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+ bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+ bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+ if (bank < 2)
+ return true;
+
+ return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2412_iobank_timing *bt;
+ u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+ unsigned int bank;
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ if (!bank_is_io(bank, bankcfg))
+ continue;
+
+ bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+ if (!bt) {
+ printk(KERN_ERR "%s: no memory for bank\n", __func__);
+ return -ENOMEM;
+ }
+
+ timings->bank[bank].io_2412 = bt;
+ s3c2412_iotiming_getbank(cfg, bt, bank);
+ }
+
+ s3c2412_print_timing("get", timings);
+ return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ u32 refresh;
+
+ WARN_ON(board == NULL);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh &= ((1 << 16) - 1);
+
+ s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 00000000000..ae2e6c604f2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,311 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+ long diff = a - b;
+
+ return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned int hdiv, pdiv;
+ unsigned long hclk, fclk, armclk;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ armclk = cfg->freq.armclk;
+ hclk_max = cfg->max.hclk;
+
+ s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+ __func__, fclk, armclk, hclk_max);
+
+ if (armclk > fclk) {
+ printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+ armclk = fclk;
+ }
+
+ /* if we are in DVS, we need HCLK to be <= ARMCLK */
+ if (armclk < fclk && armclk < hclk_max)
+ hclk_max = armclk;
+
+ for (hdiv = 1; hdiv < 9; hdiv++) {
+ if (hdiv == 5 || hdiv == 7)
+ hdiv++;
+
+ hclk = (fclk / hdiv);
+ if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+ break;
+ }
+
+ s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+ if (hdiv > 8)
+ goto invalid;
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+ if ((hclk / pdiv) > cfg->max.pclk)
+ pdiv++;
+
+ s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+ if (pdiv > 2)
+ goto invalid;
+
+ pdiv *= hdiv;
+
+ /* calculate a valid armclk */
+
+ if (armclk < hclk)
+ armclk = hclk;
+
+ /* if we're running armclk lower than fclk, this really means
+ * that the system should go into dvs mode, which means that
+ * armclk is connected to hclk. */
+ if (armclk < fclk) {
+ cfg->divs.dvs = 1;
+ armclk = hclk;
+ } else
+ cfg->divs.dvs = 0;
+
+ cfg->freq.armclk = armclk;
+
+ /* store the result, and then return */
+
+ cfg->divs.h_divisor = hdiv;
+ cfg->divs.p_divisor = pdiv;
+
+ return 0;
+
+ invalid:
+ return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+ S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long clkdiv, camdiv;
+
+ s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+ cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+ clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+ camdiv &= ~CAMDIVN_HCLK_HALF;
+
+ switch (cfg->divs.h_divisor) {
+ case 1:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+ break;
+
+ case 2:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+ break;
+
+ case 6:
+ camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+ case 3:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+ break;
+
+ case 8:
+ camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+ case 4:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+ break;
+
+ default:
+ BUG(); /* we don't expect to get here. */
+ }
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+ /* todo - set pclk. */
+
+ /* Write the divisors first with hclk intentionally halved so that
+ * when we write clkdiv we will under-frequency instead of over. We
+ * then make a short delay and remove the hclk halving if necessary.
+ */
+
+ __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ ndelay(20);
+ __raw_writel(camdiv, S3C2440_CAMDIVN);
+
+ clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+ int *divs,
+ struct cpufreq_frequency_table *table,
+ size_t table_size)
+{
+ unsigned long freq;
+ int index = 0;
+ int div;
+
+ for (div = *divs; div > 0; div = *divs++) {
+ freq = fclk / div;
+
+ if (freq > max_hclk && div != 1)
+ continue;
+
+ freq /= 1000; /* table is in kHz */
+ index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+ if (index < 0)
+ break;
+ }
+
+ return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *table,
+ size_t table_size)
+{
+ int ret;
+
+ WARN_ON(cfg->info == NULL);
+ WARN_ON(cfg->board == NULL);
+
+ ret = run_freq_for(cfg->info->max.hclk,
+ cfg->info->max.fclk,
+ hclk_divs,
+ table, table_size);
+
+ s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+ return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+ .max = {
+ .fclk = 400000000,
+ .hclk = 133333333,
+ .pclk = 66666666,
+ },
+
+ .locktime_m = 300,
+ .locktime_u = 300,
+ .locktime_bits = 16,
+
+ .name = "s3c244x",
+ .calc_iotiming = s3c2410_iotiming_calc,
+ .set_iotiming = s3c2410_iotiming_set,
+ .get_iotiming = s3c2410_iotiming_get,
+ .set_fvco = s3c2410_set_fvco,
+
+ .set_refresh = s3c2410_cpufreq_setrefresh,
+ .set_divs = s3c2440_cpufreq_setdivs,
+ .calc_divs = s3c2440_cpufreq_calcdivs,
+ .calc_freqtable = s3c2440_cpufreq_calctable,
+
+ .resume_clocks = s3c244x_setup_clocks,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+ xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+ hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+ fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+ armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+ if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+ printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+ return -ENOENT;
+ }
+
+ return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+ .add = s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass,
+ &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+ .add = s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass,
+ &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 00000000000..ff9443b233a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+ { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
+ { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
+ { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */
+ { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */
+ { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */
+ { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */
+ { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */
+ { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */
+ { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */
+ { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */
+ { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */
+ { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */
+ { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */
+ { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */
+ { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */
+ { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */
+ { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */
+ { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */
+ { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */
+ { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */
+ { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */
+ { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */
+ { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */
+ { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */
+ { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */
+ { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */
+ { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 12000000) {
+ printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_12,
+ ARRAY_SIZE(s3c2440_plls_12));
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+ .add = s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+ .add = s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 00000000000..7679af13a94
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+ { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
+ { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
+ { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */
+ { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */
+ { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */
+ { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */
+ { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */
+ { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */
+ { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */
+ { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */
+ { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */
+ { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */
+ { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */
+ { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */
+ { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */
+ { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */
+ { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */
+ { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */
+ { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */
+ { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */
+ { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */
+ { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */
+ { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */
+ { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */
+ { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */
+ { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */
+ { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */
+ { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */
+ { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */
+ { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */
+ { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */
+ { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */
+ { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */
+ { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */
+ { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */
+ { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */
+ { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */
+ { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */
+ { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */
+ { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */
+ { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */
+ { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */
+ { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */
+ { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */
+ { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */
+ { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */
+ { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */
+ { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */
+ { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */
+ { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */
+ { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */
+ { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */
+ { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */
+ { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */
+ { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 169344000) {
+ printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_169344,
+ ARRAY_SIZE(s3c2440_plls_169344));
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+ .add = s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass,
+ &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+ .add = s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass,
+ &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 00000000000..89fcf5308cf
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+ int enable)
+{
+
+ printk(KERN_INFO "%s(%d)\n", __func__, enable);
+ if (enable) {
+ s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+ s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+ } else {
+ s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+ s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+ s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+ }
+}