diff options
Diffstat (limited to 'arch/arm')
154 files changed, 8213 insertions, 1113 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a71fd941ade..a89e4734b8f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2 output to the second serial port on these devices. Saying N will cause the debug messages to appear on the first serial port. -config DEBUG_S3C_PORT - depends on DEBUG_LL && PLAT_S3C - bool "Kernel low-level debugging messages via S3C UART" - help - Say Y here if you want debug print routines to go to one of the - S3C internal UARTs. The chosen UART must have been configured - before it is used. - config DEBUG_S3C_UART depends on PLAT_S3C int "S3C UART to use for low-level debug" diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 9e6e512f011..17153b54613 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -29,7 +29,6 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); -#include <linux/compiler.h> #include <mach/uncompress.h> #ifdef CONFIG_DEBUG_ICEDCC diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index f37afd9422f..aae5bc01acc 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/string.h> #include <linux/mutex.h> +#include <linux/clk.h> #include <asm/clkdev.h> #include <mach/clkdev.h> diff --git a/arch/arm/configs/gta01_defconfig b/arch/arm/configs/gta01_defconfig new file mode 100644 index 00000000000..415ca4959e2 --- /dev/null +++ b/arch/arm/configs/gta01_defconfig @@ -0,0 +1,2948 @@ +# CONFIG_6PACK is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_9P_FS is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_ACENIC is not set +# CONFIG_ACORN_PARTITION is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADM6996_PHY is not set +# CONFIG_ADM8211 is not set +# CONFIG_AEABI is not set +# CONFIG_AFFS_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_AF_RXRPC is not set +CONFIG_AIO=y +# CONFIG_AIRO is not set +# CONFIG_AIRO_CS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_ALTERA_PCIE_CHDMA is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ANDROID is not set +CONFIG_ANON_INODES=y +# CONFIG_APM_EMULATION is not set +# CONFIG_APPLICOM is not set +# CONFIG_AR8216_PHY is not set +# CONFIG_AR9170_USB is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BAST is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_H1940 is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_REALVIEW is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_RPC is not set +CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_S3C2440 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_SMDK2410 is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCNET is not set +CONFIG_ARM=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_UNWIND is not set +# CONFIG_ARPD is not set +# CONFIG_ARTHUR is not set +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_ASUS_OLED is not set +# CONFIG_AT24 is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_ATA is not set +# CONFIG_ATALK is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_ATA_ACPI is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_ATA_SFF=y +# CONFIG_ATH5K is not set +# CONFIG_ATH9K is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1C is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL2 is not set +# CONFIG_ATM is not set +# CONFIG_ATMEL is not set +# CONFIG_ATM_AMBASSADOR is not set +# CONFIG_ATM_BR2684 is not set +CONFIG_ATM_BR2684_IPFILTER=y +# CONFIG_ATM_CLIP is not set +CONFIG_ATM_CLIP_NO_ICMP=y +# CONFIG_ATM_DRIVERS is not set +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_FIRESTREAM is not set +# CONFIG_ATM_FORE200E is not set +# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_HE is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_LANE is not set +# CONFIG_ATM_MPOA is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_SOLOS is not set +# CONFIG_ATM_TCP is not set +# CONFIG_ATM_ZATM is not set +# CONFIG_AUDIT is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_AX25 is not set +# CONFIG_AX25_DAMA_SLAVE is not set +# CONFIG_AX88796 is not set +# CONFIG_B3DFG is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_B44 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_PWM=y +# CONFIG_BACKTRACE_SELF_TEST is not set +CONFIG_BASE_FULL=y +CONFIG_BASE_SMALL=0 +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BATTERY_BQ27000_HDQ is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BAYCOM_EPP is not set +# CONFIG_BAYCOM_PAR is not set +# CONFIG_BAYCOM_SER_FDX is not set +# CONFIG_BAYCOM_SER_HDX is not set +# CONFIG_BCM43XX is not set +CONFIG_BCM43XX_DEBUG=y +CONFIG_BCM43XX_DMA=y +CONFIG_BCM43XX_DMA_AND_PIO_MODE=y +# CONFIG_BCM43XX_DMA_MODE is not set +CONFIG_BCM43XX_PIO=y +# CONFIG_BCM43XX_PIO_MODE is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_BINARY_PRINTF is not set +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_BITREVERSE=y +# CONFIG_BLINK is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_CS5536 is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_DELKIN is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_HD_ONLY is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_IDEACPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_BLK_DEV_IDEPNP is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_QD65XX is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_RZ1000 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_SD is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_UMC8672 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_XIP is not set +CONFIG_BLOCK=y +# CONFIG_BNX2 is not set +# CONFIG_BONDING is not set +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_BPQETHER is not set +CONFIG_BRIDGE=y +# CONFIG_BRIDGE_EBT_802_3 is not set +# CONFIG_BRIDGE_EBT_AMONG is not set +# CONFIG_BRIDGE_EBT_ARP is not set +# CONFIG_BRIDGE_EBT_ARPREPLY is not set +# CONFIG_BRIDGE_EBT_BROUTE is not set +# CONFIG_BRIDGE_EBT_DNAT is not set +# CONFIG_BRIDGE_EBT_IP is not set +# CONFIG_BRIDGE_EBT_IP6 is not set +# CONFIG_BRIDGE_EBT_LIMIT is not set +# CONFIG_BRIDGE_EBT_LOG is not set +# CONFIG_BRIDGE_EBT_MARK is not set +# CONFIG_BRIDGE_EBT_MARK_T is not set +# CONFIG_BRIDGE_EBT_NFLOG is not set +# CONFIG_BRIDGE_EBT_PKTTYPE is not set +# CONFIG_BRIDGE_EBT_REDIRECT is not set +# CONFIG_BRIDGE_EBT_SNAT is not set +# CONFIG_BRIDGE_EBT_STP is not set +# CONFIG_BRIDGE_EBT_T_FILTER is not set +# CONFIG_BRIDGE_EBT_T_NAT is not set +# CONFIG_BRIDGE_EBT_ULOG is not set +# CONFIG_BRIDGE_EBT_VLAN is not set +CONFIG_BRIDGE_NETFILTER=y +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_BROADCOM_PHY is not set +CONFIG_BROKEN_ON_SMP=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_BT is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_BT_BNEP is not set +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_CMTP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_HIDP is not set +# CONFIG_BT_L2CAP is not set +# CONFIG_BT_RFCOMM is not set +CONFIG_BT_RFCOMM_TTY=y +# CONFIG_BT_SCO is not set +CONFIG_BUG=y +# CONFIG_C2PORT is not set +# CONFIG_CAN is not set +# CONFIG_CAPI_AVM is not set +# CONFIG_CAPI_EICON is not set +# CONFIG_CAPI_TRACE is not set +CONFIG_CARDBUS=y +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_CASSINI is not set +# CONFIG_CB710_CORE is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_CFG80211 is not set +# CONFIG_CGROUPS is not set +CONFIG_CHARGER_PCF50606=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +CONFIG_CLASSIC_RCU=y +CONFIG_CLS_U32_MARK=y +CONFIG_CLS_U32_PERF=y +CONFIG_CMDLINE="unused -- bootloader passes ATAG list" +# CONFIG_CNIC is not set +# CONFIG_CODA_FS is not set +# CONFIG_COMEDI is not set +CONFIG_COMPAT_BRK=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_CONFIGFS_FS is not set +# CONFIG_CONNECTOR is not set +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_CONSTRUCTORS=y +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_CPU_32=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_LLSERIAL_S3C2410=y +CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_S3C2410=y +CONFIG_CPU_S3C2410_DMA=y +CONFIG_CPU_TLB_V4WBI=y +# CONFIG_CRAMFS is not set +CONFIG_CRC16=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_CRC_CCITT=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC_T10DIF=y +CONFIG_CROSSCOMPILE=y +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_AEAD is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_BLKCIPHER is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CRC32C_INTEL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCBC is not set +CONFIG_CRYPTO_PCOMP=y +# CONFIG_CRYPTO_PRNG is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_RNG is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set +# CONFIG_CRYPTO_TWOFISH_COMMON is not set +CONFIG_CRYPTO_UNLZMA=y +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_XTS is not set +CONFIG_CRYPTO_ZLIB=y +# CONFIG_CUSE is not set +# CONFIG_DAB is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DCB is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_GPIO is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_OBJECTS is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +CONFIG_DEBUG_S3C_UART=2 +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DECNET is not set +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_LZMA=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_BIC is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_CUBIC is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_HTCP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_DEFAULT_NOOP is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="westwood" +# CONFIG_DEFAULT_VEGAS is not set +CONFIG_DEFAULT_WESTWOOD=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DEVKMEM is not set +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_DGRS is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DL2K is not set +# CONFIG_DLM is not set +# CONFIG_DMADEVICES is not set +# CONFIG_DMASCC is not set +# CONFIG_DMATEST is not set +# CONFIG_DMA_ENGINE is not set +# CONFIG_DNET is not set +# CONFIG_DNOTIFY is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_DRM is not set +# CONFIG_DS1682 is not set +# CONFIG_DST is not set +# CONFIG_DTLK is not set +# CONFIG_DUMMY is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_ECHO is not set +# CONFIG_ECONET is not set +# CONFIG_EEPRO100 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_EFS_FS is not set +CONFIG_ELF_CORE=y +CONFIG_EMBEDDED=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_EPIC100 is not set +CONFIG_EPOLL=y +# CONFIG_EQUALIZER is not set +# CONFIG_ET131X is not set +# CONFIG_ETHOC is not set +CONFIG_EVENTFD=y +# CONFIG_EVENT_TRACER is not set +CONFIG_EXPERIMENTAL=y +# CONFIG_EXPORTFS is not set +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_EXTRA_FIRMWARE="" +CONFIG_EXTRA_TARGETS="" +# CONFIG_EZX_PCAP is not set +# CONFIG_FAIR_GROUP_SCHED is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_FAT_FS=y +# CONFIG_FAULT_INJECTION is not set +CONFIG_FB=y +# CONFIG_FB_3DFX is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_EARLYSUSPEND is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_GOLDFISH is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_PS3 is not set +# CONFIG_FB_PXA is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_S3 is not set +CONFIG_FB_S3C2410=y +# CONFIG_FB_S3C2410_DEBUG is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_TMIO is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FCOE is not set +# CONFIG_FDDI is not set +# CONFIG_FEALNX is not set +CONFIG_FIB_RULES=y +CONFIG_FILE_LOCKING=y +# CONFIG_FIREWIRE is not set +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FIXED_PHY is not set +CONFIG_FLATMEM=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_FONTS=y +# CONFIG_FONT_10x18 is not set +CONFIG_FONT_6x11=y +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FRAME_POINTER=y +CONFIG_FRAME_WARN=1024 +CONFIG_FREEZER=y +# CONFIG_FSCACHE is not set +# CONFIG_FSNOTIFY is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FTL is not set +# CONFIG_FTRACE is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_FUSE_FS is not set +# CONFIG_FUSION is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set +# CONFIG_FUSION_SPI is not set +CONFIG_FUTEX=y +CONFIG_FW_LOADER=y +CONFIG_GACT_PROB=y +# CONFIG_GAMEPORT is not set +# CONFIG_GCOV_KERNEL is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_TIME=y +# CONFIG_GFS2_FS is not set +CONFIG_GPIOLIB=y +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_DEVICE is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_SYSFS=y +# CONFIG_GPIO_XILINX is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_HAMACHI is not set +# CONFIG_HAMRADIO is not set +# CONFIG_HAPPYMEAL is not set +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAVE_AOUT=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PWM=y +# CONFIG_HDLC is not set +# CONFIG_HDLC_CISCO is not set +# CONFIG_HDLC_FR is not set +# CONFIG_HDLC_PPP is not set +# CONFIG_HDLC_RAW is not set +# CONFIG_HDLC_RAW_ETH is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_HECI is not set +# CONFIG_HERMES is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HID=y +# CONFIG_HIDRAW is not set +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +# CONFIG_HID_BRIGHT is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_COMPAT is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HID_DELL is not set +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_EZKEY=y +# CONFIG_HID_FF is not set +CONFIG_HID_GREENASIA=y +CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_KYE=y +CONFIG_HID_LOGITECH=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +# CONFIG_HID_PID is not set +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_ZEROPLUS=y +# CONFIG_HIGHMEM is not set +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_HIPPI is not set +# CONFIG_HOSTAP is not set +# CONFIG_HOSTAP_CS is not set +# CONFIG_HOSTAP_PCI is not set +# CONFIG_HOSTAP_PLX is not set +CONFIG_HOTPLUG=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HP100 is not set +# CONFIG_HPFS_FS is not set +# CONFIG_HP_ILO is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_HVC_UDBG is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set +CONFIG_HW_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HZ=200 +CONFIG_HZ_100=y +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_48 is not set +CONFIG_I2C=y +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCA is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_HELPER_AUTO is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_IBM_IIC is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_PROSAVAGE is not set +CONFIG_I2C_S3C2410=y +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2O is not set +# CONFIG_I82092 is not set +# CONFIG_I82365 is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_ICS932S401 is not set +# CONFIG_IDE is not set +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_IDE_GD is not set +CONFIG_IDE_MAX_HWIFS=4 +# CONFIG_IDE_PHISON is not set +CONFIG_IDE_PROC_FS=y +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_IEEE1394 is not set +# CONFIG_IEEE1394_DV1394 is not set +# CONFIG_IEEE1394_ETH1394 is not set +# CONFIG_IEEE1394_OHCI1394 is not set +# CONFIG_IEEE1394_PCILYNX is not set +# CONFIG_IEEE1394_RAWIO is not set +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_VIDEO1394 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_CRYPT_WEP is not set +# CONFIG_IEEE80211_DEBUG is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_IEEE802154 is not set +# CONFIG_IFB is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_IKCONFIG is not set +# CONFIG_IKCONFIG_PROC is not set +# CONFIG_IMAGE_CMDLINE_HACK is not set +# CONFIG_IMQ is not set +# CONFIG_IMQ_BEHAVIOR_AA is not set +# CONFIG_IMQ_BEHAVIOR_AB is not set +# CONFIG_IMQ_BEHAVIOR_BA is not set +# CONFIG_IMQ_BEHAVIOR_BB is not set +CONFIG_IMQ_NUM_DEVS=2 +CONFIG_INET=y +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET_AH is not set +CONFIG_INET_DIAG=y +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INFINIBAND is not set +# CONFIG_INFTL is not set +# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set +# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +CONFIG_INITRAMFS_COMPRESSION_NONE=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_INOTIFY=y +# CONFIG_INOTIFY_USER is not set +CONFIG_INPUT=y +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_MIMIO is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 +CONFIG_INPUT_PCF50606_PMU=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INSTRUMENTATION is not set +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_NOOP=y +# CONFIG_IP1000 is not set +# CONFIG_IP175C_PHY is not set +# CONFIG_IP6_NF_FILTER is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_MANGLE is not set +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_LIMIT is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_OWNER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_TARGET_IMQ is not set +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_TARGET_ROUTE is not set +# CONFIG_IPC_NS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_IPSEC_NAT_TRAVERSAL=y +# CONFIG_IPV6 is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_ROUTE_INFO is not set +# CONFIG_IPV6_SIT is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2100_DEBUG is not set +CONFIG_IPW2100_MONITOR=y +# CONFIG_IPW2200 is not set +# CONFIG_IPW2200_DEBUG is not set +CONFIG_IPW2200_MONITOR=y +# CONFIG_IPW2200_PROMISCUOUS is not set +# CONFIG_IPW2200_QOS is not set +# CONFIG_IPW2200_RADIOTAP is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_IPX is not set +CONFIG_IP_ADVANCED_ROUTER=y +# CONFIG_IP_DCCP is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_MULTIPLE_TABLES=y +# CONFIG_IP_NF_AMANDA is not set +# CONFIG_IP_NF_ARPFILTER is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_ARP_MANGLE is not set +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_ACCT=y +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +# CONFIG_IP_NF_FILTER is not set +# CONFIG_IP_NF_FTP is not set +# CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_IRC is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_MATCH_IPP2P is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_SET is not set +# CONFIG_IP_NF_MATCH_TIME is not set +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_NAT=y +# CONFIG_IP_NF_NAT_AMANDA is not set +# CONFIG_IP_NF_NAT_FTP is not set +# CONFIG_IP_NF_NAT_H323 is not set +# CONFIG_IP_NF_NAT_IRC is not set +CONFIG_IP_NF_NAT_NEEDED=y +# CONFIG_IP_NF_NAT_PPTP is not set +# CONFIG_IP_NF_NAT_SIP is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +# CONFIG_IP_NF_NAT_TFTP is not set +# CONFIG_IP_NF_NETBIOS_NS is not set +# CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_SET is not set +CONFIG_IP_NF_SET_HASHSIZE=1024 +# CONFIG_IP_NF_SET_IPHASH is not set +# CONFIG_IP_NF_SET_IPMAP is not set +# CONFIG_IP_NF_SET_IPPORTHASH is not set +# CONFIG_IP_NF_SET_IPTREE is not set +# CONFIG_IP_NF_SET_IPTREEMAP is not set +# CONFIG_IP_NF_SET_MACIPMAP is not set +CONFIG_IP_NF_SET_MAX=256 +# CONFIG_IP_NF_SET_NETHASH is not set +# CONFIG_IP_NF_SET_PORTMAP is not set +# CONFIG_IP_NF_SIP is not set +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_IMQ is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_MASQUERADE is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_ROUTE is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_TARGET_SET is not set +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_TFTP is not set +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_ROUTE_FWMARK=y +# CONFIG_IP_ROUTE_MULTIPATH is not set +CONFIG_IP_ROUTE_MULTIPATH_CACHED=y +# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set +# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set +# CONFIG_IP_ROUTE_MULTIPATH_RR is not set +# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +# CONFIG_IP_SCTP is not set +# CONFIG_IP_VS is not set +# CONFIG_IRDA is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISDN is not set +# CONFIG_ISDN_CAPI is not set +# CONFIG_ISDN_CAPI_CAPI20 is not set +# CONFIG_ISDN_CAPI_CAPIFS is not set +CONFIG_ISDN_CAPI_CAPIFS_BOOL=y +CONFIG_ISDN_CAPI_MIDDLEWARE=y +# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set +# CONFIG_ISDN_I4L is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISO9660_FS is not set +# CONFIG_IWL3945 is not set +# CONFIG_IWLAGN is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IXGB is not set +CONFIG_JBD=y +# CONFIG_JBD2_DEBUG is not set +# CONFIG_JBD_DEBUG is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS_FS is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_FS is not set +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_STATISTICS is not set +# CONFIG_JME is not set +CONFIG_JOLIET=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_KARMA_PARTITION is not set +# CONFIG_KEXEC is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYS is not set +# CONFIG_KGDB is not set +# CONFIG_KMEMCHECK is not set +# CONFIG_KMEMTRACE is not set +CONFIG_KMOD=y +# CONFIG_KPROBES is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_LANMEDIA is not set +# CONFIG_LAPB is not set +# CONFIG_LASAT is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_LBD is not set +# CONFIG_LBDAF is not set +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_JBT6K74=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_LEDS_ALIX is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_DAC124S085 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_PCA955X is not set +CONFIG_LEDS_PWM=y +# CONFIG_LEDS_S3C24XX is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +# CONFIG_LEDS_TRIGGER_MORSE is not set +CONFIG_LEDS_TRIGGER_NETDEV=y +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_LIB80211 is not set +# CONFIG_LIB80211_CRYPT_CCMP is not set +# CONFIG_LIB80211_CRYPT_TKIP is not set +# CONFIG_LIB80211_CRYPT_WEP is not set +# CONFIG_LIB80211_DEBUG is not set +# CONFIG_LIBCRC32C is not set +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_LIBERTAS_USB is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_LIBIPW_DEBUG is not set +# CONFIG_LINE6_USB is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_LOCKD is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_LOCKD_V4=y +CONFIG_LOCK_KERNEL=y +# CONFIG_LOCK_STAT is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGITECH_FF is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOG_BUF_SHIFT=18 +# CONFIG_LSF is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_MAC80211 is not set +CONFIG_MAC80211_DEFAULT_PS=y +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_MACH_AML_M5900 is not set +# CONFIG_MACH_ANUBIS is not set +# CONFIG_MACH_AT2440EVB is not set +# CONFIG_MACH_JIVE is not set +# CONFIG_MACH_MINI2440 is not set +# CONFIG_MACH_N30 is not set +CONFIG_MACH_NEO1973_GTA01=y +# CONFIG_MACH_NEO1973_GTA02 is not set +# CONFIG_MACH_NEXCODER_2440 is not set +# CONFIG_MACH_OSIRIS is not set +# CONFIG_MACH_OTOM is not set +# CONFIG_MACH_QT2410 is not set +# CONFIG_MACH_RX3715 is not set +# CONFIG_MACH_SMDK2412 is not set +# CONFIG_MACH_SMDK2413 is not set +# CONFIG_MACH_SMDK2443 is not set +# CONFIG_MACH_TCT_HAMMER is not set +# CONFIG_MACH_VR1000 is not set +# CONFIG_MACH_VSTMS is not set +# CONFIG_MACVLAN is not set +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_MARKEINS is not set +# CONFIG_MARKERS is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_MD is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_ME4000 is not set +# CONFIG_MEDIA_ATTACH is not set +# CONFIG_MEDIA_SUPPORT is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_MEILHAUS is not set +# CONFIG_MEMSTICK is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_MFD_CORE is not set +CONFIG_MFD_PCF50606=y +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MG_DISK is not set +# CONFIG_MIGRATION is not set +CONFIG_MII=y +# CONFIG_MINIX_FS is not set +# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_MINI_FO=y +# CONFIG_MISC_DEVICES is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_MISDN is not set +# CONFIG_MISDN_HFCPCI is not set +# CONFIG_MISDN_HFCUSB is not set +# CONFIG_MKISS is not set +CONFIG_MMC=y +# CONFIG_MMC_ARMMMCI is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_S3C=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SDRICOH_CS is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MMC_TEST is not set +# CONFIG_MMC_UNSAFE_RESUME is not set +# CONFIG_MMC_VIA_SDMMC is not set +CONFIG_MMU=y +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MSDOS_FS is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_MTD=y +CONFIG_MTD_ABSENT=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_AR7_PARTS is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_CONCAT=y +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_JEDECPROBE is not set +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_M25P80 is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_MYLOADER_PARTS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_S3C2410=y +# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set +# CONFIG_MTD_NAND_S3C2410_DEBUG is not set +CONFIG_MTD_NAND_S3C2410_HWECC=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +CONFIG_MTD_ROM=y +CONFIG_MTD_ROOTFS_ROOT_DEV=y +CONFIG_MTD_ROOTFS_SPLIT=y +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_UBI is not set +# CONFIG_MVSWITCH_PHY is not set +# CONFIG_MWAVE is not set +# CONFIG_MWL8K is not set +# CONFIG_MYRI10GE is not set +CONFIG_NAMESPACES=y +# CONFIG_NATIONAL_PHY is not set +# CONFIG_NCP_FS is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_NEC_MARKEINS is not set +CONFIG_NET=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETDEBUG is not set +CONFIG_NETDEVICES=y +CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_NETFILTER=y +CONFIG_NETFILTER_ADVANCED=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_TPROXY is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set +# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_IMQ is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NETROM is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NET_9P is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_ACT_SKBEDIT=y +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_BASIC=y +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_CLS_FW is not set +CONFIG_NET_CLS_IND=y +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_DSA is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_NBYTE is not set +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_TEXT is not set +# CONFIG_NET_EMATCH_U32 is not set +CONFIG_NET_ESTIMATOR=y +# CONFIG_NET_ETHERNET is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPGRE_BROADCAST=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_KEY is not set +# CONFIG_NET_KEY_MIGRATE is not set +# CONFIG_NET_NS is not set +CONFIG_NET_PCI=y +# CONFIG_NET_PCMCIA is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_NET_RADIO=y +# CONFIG_NET_SB1000 is not set +CONFIG_NET_SCHED=y +# CONFIG_NET_SCH_ATM is not set +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_CLK_CPU is not set +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_DRR is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_ESFQ is not set +CONFIG_NET_SCH_ESFQ_NFCT=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_INGRESS is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_TULIP is not set +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_NET_WIRELESS=y +CONFIG_NET_WIRELESS_RTNETLINK=y +# CONFIG_NEW_GPIO is not set +CONFIG_NEW_LEDS=y +# CONFIG_NFSD is not set +CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V2_ACL is not set +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +# CONFIG_NFS_ACL_SUPPORT is not set +CONFIG_NFS_COMMON=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFS_FS is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +# CONFIG_NFTL is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_ENABLED=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IPV4 is not set +# CONFIG_NF_CONNTRACK_IPV6 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_NF_CONNTRACK_RTSP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_ACCT is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_GRE is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_NF_NAT is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_FTP is not set +# CONFIG_NF_NAT_H323 is not set +# CONFIG_NF_NAT_IRC is not set +CONFIG_NF_NAT_NEEDED=y +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_PROTO_GRE is not set +# CONFIG_NF_NAT_RTSP is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NL80211=y +CONFIG_NLATTR=y +CONFIG_NLS=y +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_NOZOMI is not set +# CONFIG_NO_HZ is not set +CONFIG_NO_IOPORT=y +# CONFIG_NS83820 is not set +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_OCF_BENCH is not set +# CONFIG_OCF_EP80579 is not set +# CONFIG_OCF_HIFN is not set +# CONFIG_OCF_HIFNHIPP is not set +# CONFIG_OCF_IXP4XX is not set +# CONFIG_OCF_OCF is not set +# CONFIG_OCF_OCFNULL is not set +# CONFIG_OCF_SAFE is not set +# CONFIG_OCF_TALITOS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_P54_COMMON is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PAGE_POISONING is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PANTHERLORD_FF is not set +# CONFIG_PARPORT is not set +# CONFIG_PARPORT_PC is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_ISAPNP is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_WINBOND_VLB is not set +# CONFIG_PC300TOO is not set +# CONFIG_PCCARD is not set +CONFIG_PCF50606_ADC=y +# CONFIG_PCF50606_GPO is not set +CONFIG_PCF50606_WATCHDOG=y +# CONFIG_PCF8575 is not set +# CONFIG_PCI is not set +# CONFIG_PCI200SYN is not set +# CONFIG_PCIEASPM is not set +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_PCI_ATMEL is not set +# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_MSI is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCMCIA is not set +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_ATMEL is not set +# CONFIG_PCMCIA_DEBUG is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_HERMES is not set +# CONFIG_PCMCIA_IOCTL is not set +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PCMCIA_NETWAVE is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_PCMCIA_SPECTRUM is not set +# CONFIG_PCMCIA_SYM53C500 is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PCNET32 is not set +# CONFIG_PD6729 is not set +# CONFIG_PDA_POWER is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_PHANTOM is not set +# CONFIG_PHONE is not set +# CONFIG_PHONET is not set +# CONFIG_PHYLIB is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +# CONFIG_PID_NS is not set +# CONFIG_PLAN9AUTH is not set +CONFIG_PLAT_S3C=y +CONFIG_PLAT_S3C24XX=y +CONFIG_PLIST=y +# CONFIG_PLX_HERMES is not set +CONFIG_PM=y +# CONFIG_PMIC_DA903X is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +# CONFIG_POHMELFS is not set +# CONFIG_POSIX_MQUEUE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PPC4xx_GPIO=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_PPP is not set +# CONFIG_PPPOATM is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_FILTER=y +# CONFIG_PPP_MPPE is not set +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPS is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_PRINTK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_PRISM54 is not set +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROFILING is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_QEMU is not set +# CONFIG_QLA3XXX is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_QUOTA is not set +# CONFIG_R3964 is not set +# CONFIG_R6040 is not set +# CONFIG_R8169 is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_RAID_ATTRS is not set +CONFIG_RAMFS=y +# CONFIG_RAW_DRIVER is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RDC_17F3101X is not set +CONFIG_RD_BZIP2=y +CONFIG_RD_GZIP=y +CONFIG_RD_LZMA=y +# CONFIG_REALTEK_PHY is not set +# CONFIG_REDWOOD is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_PCF50606=y +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_RELAY is not set +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_RFD_FTL is not set +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +CONFIG_RFKILL_LEDS=y +# CONFIG_ROMFS_FS is not set +# CONFIG_ROSE is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_RT2860 is not set +# CONFIG_RT2870 is not set +# CONFIG_RT2X00 is not set +# CONFIG_RT3070 is not set +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DEBUG is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +CONFIG_RTC_DRV_PCF50606=y +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_RTC7301 is not set +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_S3C is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_LIB=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_RTL8187SE is not set +# CONFIG_RTL8192SU is not set +# CONFIG_RTL8306_PHY is not set +CONFIG_RT_MUTEXES=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_S2IO is not set +CONFIG_S3C2410_CLOCK=y +CONFIG_S3C2410_DMA=y +# CONFIG_S3C2410_DMA_DEBUG is not set +CONFIG_S3C2410_GPIO=y +CONFIG_S3C2410_PM=y +# CONFIG_S3C2410_PM_CHECK is not set +# CONFIG_S3C2410_PM_DEBUG is not set +CONFIG_S3C2410_WATCHDOG=y +CONFIG_S3C24XX_ADC=y +CONFIG_S3C24XX_GPIO_EXTRA=0 +CONFIG_S3C24XX_PWM=y +CONFIG_S3C_BOOT_ERROR_RESET=y +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +# CONFIG_S3C_BOOT_WATCHDOG is not set +CONFIG_S3C_DEV_USB_HOST=y +CONFIG_S3C_DMA=y +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +# CONFIG_SAMPLES is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PMP is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SC92031 is not set +# CONFIG_SCC is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_SCHED_BFS is not set +CONFIG_SCHED_CFS=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHED_TRACER is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_ESP_CORE is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_MPT2SAS is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_SCSI_PAS16 is not set +CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +# CONFIG_SCSI_SEAGATE is not set +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_ULTRASTOR is not set +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SDIO_UART is not set +# CONFIG_SECCOMP is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_APPLESMC is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_CORETEMP is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCHMD is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_HDAPS is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_K8TEMP is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +CONFIG_SERIAL_S3C2410=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_SAMSUNG_UARTS=3 +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIO=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_SHAPER is not set +CONFIG_SHMEM=y +CONFIG_SIGNALFD=y +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_SIS190 is not set +# CONFIG_SIS900 is not set +# CONFIG_SK98LIN is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SKY2_DEBUG is not set +CONFIG_SLAB=y +CONFIG_SLABINFO=y +# CONFIG_SLHC is not set +# CONFIG_SLICOSS is not set +# CONFIG_SLIP is not set +# CONFIG_SLOB is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_SMARTJOYPLUS_FF is not set +# CONFIG_SMB_FS is not set +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMC911X is not set +# CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SMSC_PHY is not set +CONFIG_SND=y +# CONFIG_SND_AC97_POWER_SAVE is not set +# CONFIG_SND_AD1816A is not set +# CONFIG_SND_AD1848 is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ADLIB is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ALS100 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT2320 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMI8330 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4231 is not set +# CONFIG_SND_CS4232 is not set +# CONFIG_SND_CS4236 is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_DT019X is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1688 is not set +# CONFIG_SND_ES18XX is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_ES968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_GUSCLASSIC is not set +# CONFIG_SND_GUSEXTREME is not set +# CONFIG_SND_GUSMAX is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_HWDEP is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_INTERWAVE is not set +# CONFIG_SND_INTERWAVE_STB is not set +# CONFIG_SND_ISA is not set +CONFIG_SND_JACK=y +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_MIRO is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_OPL3SA2 is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_OPTI92X_AD1848 is not set +# CONFIG_SND_OPTI92X_CS4231 is not set +# CONFIG_SND_OPTI93X is not set +CONFIG_SND_OSSEMUL=y +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_PCI is not set +CONFIG_SND_PCM=y +# CONFIG_SND_PCMCIA is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_PDAUDIOCF is not set +# CONFIG_SND_RAWMIDI is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_RTCTIMER is not set +CONFIG_SND_S3C24XX_SOC=y +CONFIG_SND_S3C24XX_SOC_I2S=y +# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set +CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=y +# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set +# CONFIG_SND_SB16 is not set +# CONFIG_SND_SB8 is not set +# CONFIG_SND_SBAWE is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_SGALAXY is not set +CONFIG_SND_SOC=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_WM8753=y +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_SSCAPE is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_TIMER=y +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_US122L is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_WAVEFRONT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SNI_RM is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_SONYPI is not set +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_SPARSEMEM_MANUAL is not set +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPI=y +# CONFIG_SPI_AT25 is not set +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_GPIO=y +# CONFIG_SPI_GPIO_OLD is not set +CONFIG_SPI_MASTER=y +# CONFIG_SPI_ORION is not set +# CONFIG_SPI_S3C24XX is not set +# CONFIG_SPI_S3C24XX_GPIO is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_SQUASHFS is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_SQUASHFS_SUPPORT_LZMA=y +CONFIG_SQUASHFS_SUPPORT_ZLIB=y +# CONFIG_SQUASHFS_VMALLOC is not set +# CONFIG_SSB is not set +# CONFIG_SSB_BLOCKIO is not set +# CONFIG_SSB_DEBUG is not set +# CONFIG_SSB_PCMCIAHOST is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSFDC is not set +CONFIG_STACKTRACE_SUPPORT=y +# CONFIG_STACK_TRACER is not set +# CONFIG_STAGING is not set +# CONFIG_STAGING_EXCLUDE_BUILD is not set +CONFIG_STANDALONE=y +CONFIG_STDBINUTILS=y +# CONFIG_STE10XP is not set +CONFIG_STP=y +# CONFIG_STRIP is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_SUNDANCE is not set +# CONFIG_SUNGEM is not set +# CONFIG_SUNRPC is not set +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_GSS is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SWAP=y +# CONFIG_SWCONFIG is not set +# CONFIG_SYNCLINK_CS is not set +CONFIG_SYN_COOKIES=y +CONFIG_SYSCTL=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_SYSFS=y +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_SYSV_FS is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_TASKSTATS is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TCIC is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CUBIC is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_VENO is not set +CONFIG_TCP_CONG_WESTWOOD=y +# CONFIG_TCP_CONG_YEAH is not set +CONFIG_TCP_MD5SIG=y +CONFIG_TEXTSEARCH=y +# CONFIG_TEXTSEARCH_BM is not set +# CONFIG_TEXTSEARCH_FSM is not set +# CONFIG_TEXTSEARCH_KMP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_TIGON3 is not set +CONFIG_TIMERFD=y +# CONFIG_TIMER_STATS is not set +# CONFIG_TINY_SHMEM is not set +# CONFIG_TIPC is not set +# CONFIG_TLAN is not set +# CONFIG_TMD_HERMES is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_FILTER is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TR is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_TRANZPORT is not set +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_TUN is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_TUNER_TEA5761 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_UACCESS_WITH_MEMCPY is not set +# CONFIG_UDF_FS is not set +CONFIG_UDF_NLS=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_UFS_FS is not set +CONFIG_UID16=y +# CONFIG_UIO is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_UNEVICTABLE_LRU is not set +# CONFIG_UNION_MOUNT is not set +CONFIG_UNIX=y +CONFIG_UNIX98_PTYS=y +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_USB=y +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AIPTEK is not set +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_ATM is not set +# CONFIG_USB_ATMEL is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_BELKIN=y +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_CPC is not set +# CONFIG_USB_CXACRU is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_ET61X251 is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_EZUSB=y +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_FTDI_ELAN is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +CONFIG_USB_GADGET_S3C2410=y +# CONFIG_USB_GADGET_S3C_HSOTG is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_VBUS_DRAW=500 +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_GSPCA is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +CONFIG_USB_GSPCA_SN9C20X_EVDEV=y +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_G_SERIAL is not set +CONFIG_USB_HID=y +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_KBD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_KC2190 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_M5602 is not set +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_NET_AX8817X is not set +# CONFIG_USB_NET_CDCETHER is not set +# CONFIG_USB_NET_CDC_EEM is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PCI is not set +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_HCD_PPC_SOC is not set +# CONFIG_USB_OHCI_HCD_SSB is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_PWC_INPUT_EVDEV is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_S2255 is not set +CONFIG_USB_S3C2410=y +# CONFIG_USB_S3C2410_DEBUG is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SERIAL is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_DEBUG is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_GARMIN is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_SAFE is not set +CONFIG_USB_SERIAL_SAFE_PADDED=y +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_SPEEDTOUCH is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_STORAGE is not set +CONFIG_USB_STORAGE_ALAUDA=y +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_STORAGE_DATAFAB=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_STORAGE_KARMA=y +# CONFIG_USB_STORAGE_ONETOUCH is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +# CONFIG_USB_STORAGE_SIERRA is not set +CONFIG_USB_STORAGE_USBAT=y +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_STV680 is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_TEST is not set +# CONFIG_USB_TMC is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_UEAGLEATM is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_VST is not set +# CONFIG_USB_W9968CF is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set +# CONFIG_USB_XHCI_HCD is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_XUSBATM is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USER_NS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_UTS_NS is not set +# CONFIG_UWB is not set +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VETH is not set +CONFIG_VFAT_FS=y +# CONFIG_VGASTATE is not set +# CONFIG_VGA_CONSOLE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_CAPTURE_DRIVERS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_CX2341X is not set +# CONFIG_VIDEO_CX25840 is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_DPC is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_GO7007 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_MEDIA is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_MXB is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_SAA6588 is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA7111 is not set +# CONFIG_VIDEO_SAA7114 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_SAA7191 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_VIDEO_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_VIDEO_V4L2 is not set +# CONFIG_VIDEO_V4L2_COMMON is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_VP27SMPX is not set +# CONFIG_VIDEO_VPX3220 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_ZORAN is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_VIRTUALIZATION is not set +CONFIG_VIRT_TO_BUS=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_VMSPLIT_1G is not set +# CONFIG_VMSPLIT_2G is not set +CONFIG_VMSPLIT_3G=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_VT=y +# CONFIG_VT6655 is not set +CONFIG_VT_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VXFS_FS is not set +# CONFIG_W1 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_GPIO is not set +# CONFIG_W1_MASTER_MATROX is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_WAN is not set +# CONFIG_WANXL is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +# CONFIG_WDTPCI is not set +# CONFIG_WIMAX is not set +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WLAN_80211 is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_WR_PPMC is not set +# CONFIG_X25 is not set +CONFIG_XFRM=y +# CONFIG_XFRM_IPCOMP is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_USER is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_XFS_FS is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XIP_KERNEL is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_YAM is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_YENTA is not set +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +# CONFIG_YENTA_TI is not set +# CONFIG_YENTA_TOSHIBA is not set +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +# CONFIG_ZD1211RW is not set +# CONFIG_ZD1211RW_DEBUG is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_ZISOFS=y +# CONFIG_ZISOFS_FS is not set +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 8e74c66f239..605a8462f17 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -1,109 +1,246 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Sun Aug 14 19:26:59 2005 +# Linux kernel version: 2.6.30-rc8 +# Wed Jun 3 13:52:33 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y +CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set -# CONFIG_IKCONFIG is not set +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # -# Loadable module support +# IO Schedulers # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # System Type # -# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Atmel AT91 System-on-Chip +# CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # -# AT91RM9200 Implementations +# AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_CSB337 is not set # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set CONFIG_MACH_KB9200=y +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_YL9200 is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_ZBOOT_ROM=y -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y # -# Device Drivers +# Networking options # +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # -# Generic Driver Options +# Network testing # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -CONFIG_DEBUG_DRIVER=y +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # -# Memory Technology Devices (MTD) +# Device Drivers # -# CONFIG_MTD is not set # -# Parallel port support +# Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set # -# IO Schedulers +# EEPROM support # -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set - -# -# ISDN subsystem -# +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# IPMI +# Memory mapped GPIO expanders: # -# CONFIG_IPMI_HANDLER is not set # -# Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_AT91RM9200_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver +# PCI GPIO expanders: # -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# SPI GPIO expanders: # -# CONFIG_AT91_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# I2C support +# Watchdog Device Drivers # -# CONFIG_I2C is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Misc devices +# Sonics Silicon Backplane # +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set # -# USB HID Boot Protocol drivers +# also be needed; see USB_STORAGE Help for more info # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # +# CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices +# USB port drivers # -# CONFIG_USB_DABUSB is not set +# CONFIG_USB_SERIAL is not set # -# Video4Linux support is needed for USB Multimedia device support +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB Network Adapters +# OTG and related infrastructure # -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# USB port drivers +# MMC/SD/SDIO Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Serial Converter support +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_SERIAL is not set +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# USB Miscellaneous drivers +# RTC interfaces # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# USB DSL modem support +# SPI RTC drivers # # -# USB Gadget Support +# Platform RTC drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# MMC/SD Card support +# on-CPU RTC drivers # -# CONFIG_MMC is not set +CONFIG_RTC_DRV_AT91RM9200=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # -# XFS support +# Caches # -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set +# CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 0a1abb978d7..af74cc2de8b 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -629,7 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set +CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index 083516cd0d7..75263a83741 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -1,15 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc1 -# Wed Apr 8 10:18:06 2009 +# Linux kernel version: 2.6.31-rc4 +# Fri Jul 24 16:08:06 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -85,7 +84,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -99,6 +103,12 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,13 +148,14 @@ CONFIG_FREEZER=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -153,25 +164,25 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations @@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MACH_MX27_3DS=y +CONFIG_MACH_MX27LITE=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y @@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_COMMON_CLKDEV=y # @@ -238,7 +250,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y # CONFIG_MTD_ONENAND is not set # @@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set CONFIG_FEC=y # CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set @@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set @@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -719,6 +770,7 @@ CONFIG_W1=y # # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set # @@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=y - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_RADIO_ADAPTERS is not set -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1168,6 +1266,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 20ada526f6d..a4f9a2a8149 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,15 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc1 -# Wed Apr 8 11:06:37 2009 +# Linux kernel version: 2.6.31-rc4 +# Tue Jul 28 14:11:34 2009 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -86,7 +85,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -136,13 +145,14 @@ CONFIG_FREEZER=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -151,25 +161,25 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations @@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_MX2 is not set CONFIG_ARCH_MX3=y CONFIG_ARCH_MX31=y +CONFIG_ARCH_MX35=y # # MX3 platforms: @@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y CONFIG_MACH_MX31ADS=y CONFIG_MACH_MX31ADS_WM1133_EV1=y CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y CONFIG_MACH_MX31LITE=y CONFIG_MACH_MX31_3DS=y CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_MX31LILLY=y CONFIG_MACH_QONG=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_MX35_3DS=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y +CONFIG_ARCH_HAS_RNGA=y +CONFIG_ARCH_MXC_IOMUX_V3=y # # Processor Type @@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_L2X0=y +# CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y # @@ -242,7 +261,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y # CONFIG_MTD_ONENAND is not set # @@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -528,7 +576,7 @@ CONFIG_MII=y # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set CONFIG_SMSC911X=y -# CONFIG_DNET is not set +CONFIG_DNET=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -537,8 +585,10 @@ CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_CS89x0=y -CONFIG_CS89x0_NONISA_IRQ=y +# CONFIG_CS89x0 is not set +# CONFIG_KS8842 is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set @@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -669,6 +719,7 @@ CONFIG_W1=y # # CONFIG_W1_MASTER_DS2482 is not set CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set # @@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set @@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y CONFIG_MFD_WM8352_CONFIG_MODE_0=y CONFIG_MFD_WM8350_I2C=y # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# +# CONFIG_AB3100_CORE is not set +CONFIG_MEDIA_SUPPORT=y # # Multimedia core support @@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y CONFIG_SOC_CAMERA_MT9V022=y CONFIG_SOC_CAMERA_TW9910=y # CONFIG_SOC_CAMERA_PLATFORM is not set -# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_SOC_CAMERA_OV772X=y +CONFIG_MX3_VIDEO=y CONFIG_VIDEO_MX3=y +# CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -847,8 +900,11 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set CONFIG_REGULATOR_WM8350=y +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_ARM_UNWIND=y @@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_LZO=y # # Random Number Generation @@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1119,6 +1170,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index 28be17fbc15..d5ff4776cd0 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set -CONFIG_TWL4030_USB=y +# CONFIG_TWL4030_USB is not set # CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index eb2cb31825c..f238df66efd 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0" +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TWL4030_USB=y -CONFIG_MMC=m +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2d58b8fe59b..b49810461e4 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y +CONFIG_MACH_MINI2440=y # # S3C2442 Machines @@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 2e8fa50e9a0..32860609e05 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 07dfb98df4f..9d32faef05f 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_S3C_PORT is not set CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 2d827e12114..7d61ae6e75d 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Mon Jun 1 09:18:22 2009 +# Linux kernel version: 2.6.31-rc3 +# Thu Jul 16 23:36:10 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -68,7 +66,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -81,8 +78,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_AIO is not set + +# +# Performance Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -94,6 +96,10 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -106,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,9 +144,9 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -216,8 +222,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y # @@ -243,7 +249,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -258,17 +263,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072" +CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -359,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -497,6 +504,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -533,12 +541,14 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_STU300=y # # External I2C/SMBus adapter drivers @@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +CONFIG_SPI_PL022=y # # SPI Protocol Masters @@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_COH901327_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +CONFIG_AB3100_CORE=y +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -760,6 +761,11 @@ CONFIG_SND_JACK=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set @@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_DEBUG=y # CONFIG_MMC_UNSAFE_RESUME is not set # @@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -887,7 +894,10 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -900,16 +910,19 @@ CONFIG_REGULATOR=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set # # Caches @@ -1033,6 +1046,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1063,18 +1077,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 9e07fe50702..9ed2377fe8e 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) #else /* ARM_ARCH_6 */ -#include <asm/system.h> - #ifdef CONFIG_SMP #error SMP not supported on pre-ARMv6 CPUs #endif diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h index 2242ce22ec6..7ade2b8445d 100644 --- a/arch/arm/include/asm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -29,8 +29,9 @@ struct fiq_handler { extern int claim_fiq(struct fiq_handler *f); extern void release_fiq(struct fiq_handler *f); extern void set_fiq_handler(void *start, unsigned int length); -extern void set_fiq_regs(struct pt_regs *regs); -extern void get_fiq_regs(struct pt_regs *regs); +extern void set_fiq_c_handler(void (*handler)(void)); +extern void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs); +extern void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs); extern void enable_fiq(int fiq); extern void disable_fiq(int fiq); diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index be962c1349c..9c746af1bf6 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -12,7 +12,7 @@ /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1cd2d6416bd..c433c6c7311 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -285,15 +285,6 @@ extern struct page *empty_zero_page; #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) #define pte_special(pte) (0) -/* - * The following only works if pte_present() is not true. - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 2) -#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 30 - #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -384,16 +375,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* Encode and decode a swap entry. +/* + * Encode and decode a swap entry. Swap entries are stored in the Linux + * page tables as follows: * - * We support up to 32GB of swap on 4k machines + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <--------------- offset --------------------> <--- type --> 0 0 + * + * This gives us up to 127 swap files and 32GB per swap file. Note that + * the offset field is always non-zero. */ -#define __swp_type(x) (((x).val >> 2) & 0x7f) -#define __swp_offset(x) ((x).val >> 9) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __SWP_TYPE_SHIFT 2 +#define __SWP_TYPE_BITS 7 +#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) +#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) + +#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) +#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) + #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) +/* + * It is an error for the kernel to have more swap files than we can + * encode in the PTEs. This ensures that we know when MAX_SWAPFILES + * is increased beyond what we presently support. + */ +#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) + +/* + * Encode and decode a file entry. File entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <------------------------ offset -------------------------> 1 0 + */ +#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 2) +#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) + +#define PTE_FILE_MAX_BITS 30 + /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee1304f22f9..5ccce0a9b03 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -201,7 +201,8 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { unsigned long start; unsigned long size; - int node; + unsigned short node; + unsigned short highmem; }; struct meminfo { diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 4f8848260ee..73394e50cbc 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -73,7 +73,7 @@ struct thread_info { .task = &tsk, \ .exec_domain = &default_exec_domain, \ .flags = 0, \ - .preempt_count = 1, \ + .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 321c83e43a1..f41a6f57cd1 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) -#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) +#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 366e5097a41..8c3de1a350b 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -148,7 +148,7 @@ trace: sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc mov pc, r2 - mov lr, r1 @ restore lr + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} #endif /* CONFIG_DYNAMIC_FTRACE */ diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 6ff7919613d..c07691ef4c0 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -8,6 +8,8 @@ * * FIQ support re-written by Russell King to be more generic * + * FIQ handler in C supoprt written by Andy Green <andy@openmoko.com> + * * We now properly support a method by which the FIQ handlers can * be stacked onto the vector. We still do not support sharing * the FIQ vector itself. @@ -124,6 +126,83 @@ void __naked get_fiq_regs(struct pt_regs *regs) : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); } +/* -------- FIQ handler in C --------- + * + * Major Caveats for using this + * --------------------------- + * * + * * 1) it CANNOT touch any vmalloc()'d memory, only memory + * that was kmalloc()'d. Static allocations in the monolithic kernel + * are kmalloc()'d so they are okay. You can touch memory-mapped IO, but + * the pointer for it has to have been stored in kmalloc'd memory. The + * reason for this is simple: every now and then Linux turns off interrupts + * and reorders the paging tables. If a FIQ happens during this time, the + * virtual memory space can be partly or entirely disordered or missing. + * + * 2) Because vmalloc() is used when a module is inserted, THIS FIQ + * ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module. But the way + * it is set up, you can all to enable and disable it from your module + * and intercommunicate with it through struct fiq_ipc + * fiq_ipc which you can define in + * asm/archfiq_ipc_type.h. The reason is the same as above, a + * FIQ could happen while even the ISR is not present in virtual memory + * space due to pagetables being changed at the time. + * + * 3) You can't call any Linux API code except simple macros + * - understand that FIQ can come in at any time, no matter what + * state of undress the kernel may privately be in, thinking it + * locked the door by turning off interrupts... FIQ is an + * unstoppable monster force (which is its value) + * - they are not vmalloc()'d memory safe + * - they might do crazy stuff like sleep: FIQ pisses fire and + * is not interested in 'sleep' that the weak seem to need + * - calling APIs from FIQ can re-enter un-renterable things + * - summary: you cannot interoperate with linux APIs directly in the FIQ ISR + * + * If you follow these rules, it is fantastic, an extremely powerful, solid, + * genuine hard realtime feature. + */ + +static void (*current_fiq_c_isr)(void); +#define FIQ_C_ISR_STACK_SIZE 256 + +static void __attribute__((naked)) __jump_to_isr(void) +{ + asm __volatile__ ("mov pc, r8"); +} + + +static void __attribute__((naked)) __actual_isr(void) +{ + asm __volatile__ ( + "stmdb sp!, {r0-r12, lr};" + "mov fp, sp;" + ); + + current_fiq_c_isr(); + + asm __volatile__ ( + "ldmia sp!, {r0-r12, lr};" + "subs pc, lr, #4;" + ); +} + +void set_fiq_c_handler(void (*isr)(void)) +{ + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + regs.ARM_r8 = (unsigned long) __actual_isr; + regs.ARM_sp = 0xffff001c + FIQ_C_ISR_STACK_SIZE; + + set_fiq_handler(__jump_to_isr, 4); + + current_fiq_c_isr = isr; + + set_fiq_regs(®s); +} +/* -------- FIQ handler in C ---------*/ + int claim_fiq(struct fiq_handler *f) { int ret = 0; diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 096f600dc8d..b7c3490eaa2 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -98,17 +98,6 @@ unlock: return 0; } -/* Handle bad interrupts */ -static struct irq_desc bad_irq_desc = { - .handle_irq = handle_bad_irq, - .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), -}; - -#ifdef CONFIG_CPUMASK_OFFSTACK -/* We are not allocating bad_irq_desc.affinity or .pending_mask */ -#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK." -#endif - /* * do_IRQ handles all hardware IRQ's. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) * Some hardware gives randomly wrong interrupts. Rather * than crashing, do something sensible. */ - if (irq >= NR_IRQS) - handle_bad_irq(irq, &bad_irq_desc); - else + if (unlikely(irq >= NR_IRQS)) { + if (printk_ratelimit()) + printk(KERN_WARNING "Bad IRQ%u\n", irq); + ack_bad_irq(irq); + } else { generic_handle_irq(irq); + } /* AT91 specific workaround */ irq_finish(irq); @@ -165,10 +157,6 @@ void __init init_IRQ(void) for (irq = 0; irq < NR_IRQS; irq++) irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; -#ifdef CONFIG_SMP - cpumask_setall(bad_irq_desc.affinity); - bad_irq_desc.node = smp_processor_id(); -#endif init_arch_irq(); } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 93bb4247b7e..f6bc5d44278 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -133,7 +133,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act, } #ifdef CONFIG_CRUNCH -static int preserve_crunch_context(struct crunch_sigframe *frame) +static int preserve_crunch_context(struct crunch_sigframe __user *frame) { char kbuf[sizeof(*frame) + 8]; struct crunch_sigframe *kframe; @@ -146,7 +146,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame) return __copy_to_user(frame, kframe, sizeof(*frame)); } -static int restore_crunch_context(struct crunch_sigframe *frame) +static int restore_crunch_context(struct crunch_sigframe __user *frame) { char kbuf[sizeof(*frame) + 8]; struct crunch_sigframe *kframe; diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 4340bf3d2c8..69371028a20 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -6,6 +6,7 @@ #include <asm-generic/vmlinux.lds.h> #include <asm/thread_info.h> #include <asm/memory.h> +#include <asm/page.h> OUTPUT_ARCH(arm) ENTRY(stext) @@ -63,7 +64,7 @@ SECTIONS usr/built-in.o(.init.ramfs) __initramfs_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __per_cpu_load = .; __per_cpu_start = .; *(.data.percpu.page_aligned) @@ -73,7 +74,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif } @@ -118,7 +119,7 @@ SECTIONS *(.got) /* Global offset table */ } - RODATA + RO_DATA(PAGE_SIZE) _etext = .; /* End of text and rodata section */ @@ -158,17 +159,17 @@ SECTIONS *(.data.init_task) #ifdef CONFIG_XIP_KERNEL - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_begin = .; *(.data.nosave) - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_end = .; /* diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index cc270beadd5..a55398ed121 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -24,6 +24,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/at73c213.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <linux/clk.h> #include <mach/hardware.h> @@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = { } }; + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { + .gpio = AT91_PIN_PA30, + .code = BTN_3, + .desc = "Button 3", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA31, + .code = BTN_4, + .desc = "Button 4", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ + at91_set_deglitch(AT91_PIN_PA30, 1); + at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ + at91_set_deglitch(AT91_PIN_PA31, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + static struct i2c_board_info __initdata ek_i2c_devices[] = { { I2C_BOARD_INFO("24c512", 0x50), @@ -245,6 +297,8 @@ static void __init ek_board_init(void) at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* Push Buttons */ + ek_add_device_buttons(); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */ diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 35e12a49d1a..f6b5672cabd 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = { static void at91_lcdc_power_control(int on) { if (on) - at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ + at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */ else - at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ + at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */ } /* Driver datas */ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .lcdcon_is_backlight = true, .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN, .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2, .default_monspecs = &at91fb_default_monspecs, .atmel_lcdfb_power_control = at91_lcdc_power_control, .guard_time = 1, + .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, }; #else diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h new file mode 100644 index 00000000000..187cb58345c --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at_hdmac.h @@ -0,0 +1,102 @@ +/* + * Header file for the Atmel AHB DMA Controller driver + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT_HDMAC_H +#define AT_HDMAC_H + +#include <linux/dmaengine.h> + +/** + * struct at_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @cap_mask: dma_capability flags supported by the platform + */ +struct at_dma_platform_data { + unsigned int nr_channels; + dma_cap_mask_t cap_mask; +}; + +/** + * enum at_dma_slave_width - DMA slave register access width. + * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses + * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses + * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses + */ +enum at_dma_slave_width { + AT_DMA_SLAVE_WIDTH_8BIT = 0, + AT_DMA_SLAVE_WIDTH_16BIT, + AT_DMA_SLAVE_WIDTH_32BIT, +}; + +/** + * struct at_dma_slave - Controller-specific information about a slave + * @dma_dev: required DMA master device + * @tx_reg: physical address of data register used for + * memory-to-peripheral transfers + * @rx_reg: physical address of data register used for + * peripheral-to-memory transfers + * @reg_width: peripheral register width + * @cfg: Platform-specific initializer for the CFG register + * @ctrla: Platform-specific initializer for the CTRLA register + */ +struct at_dma_slave { + struct device *dma_dev; + dma_addr_t tx_reg; + dma_addr_t rx_reg; + enum at_dma_slave_width reg_width; + u32 cfg; + u32 ctrla; +}; + + +/* Platform-configurable bits in CFG */ +#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ +#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ +#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ +#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ +#define ATC_SRC_H2SEL_SW (0x0 << 9) +#define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ +#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ +#define ATC_DST_H2SEL_SW (0x0 << 13) +#define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_SOD (0x1 << 16) /* Stop On Done */ +#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ +#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ +#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ +#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) +#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) +#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ +#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ +#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) +#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) +#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) + +/* Platform-configurable bits in CTRLA */ +#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */ +#define ATC_SCSIZE_1 (0x0 << 16) +#define ATC_SCSIZE_4 (0x1 << 16) +#define ATC_SCSIZE_8 (0x2 << 16) +#define ATC_SCSIZE_16 (0x3 << 16) +#define ATC_SCSIZE_32 (0x4 << 16) +#define ATC_SCSIZE_64 (0x5 << 16) +#define ATC_SCSIZE_128 (0x6 << 16) +#define ATC_SCSIZE_256 (0x7 << 16) +#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */ +#define ATC_DCSIZE_1 (0x0 << 20) +#define ATC_DCSIZE_4 (0x1 << 20) +#define ATC_DCSIZE_8 (0x2 << 20) +#define ATC_DCSIZE_16 (0x3 << 20) +#define ATC_DCSIZE_32 (0x4 << 20) +#define ATC_DCSIZE_64 (0x5 << 20) +#define ATC_DCSIZE_128 (0x6 << 20) +#define ATC_DCSIZE_256 (0x7 << 20) + +#endif /* AT_HDMAC_H */ diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 5ac2f565d86..d6ab64ccd49 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -37,7 +37,6 @@ #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> -#include <mach/common.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 28c9008df4f..84ad5d161a8 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -36,7 +36,6 @@ #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> -#include <mach/common.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index d9d40450bdc..56c8cd01de9 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -45,7 +45,6 @@ #include <mach/nand.h> #include <mach/mmc.h> #include <mach/emac.h> -#include <mach/common.h> #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e17de635262..8657e72debc 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -47,7 +47,6 @@ #include <mach/i2c.h> #include <mach/mmc.h> #include <mach/emac.h> -#include <mach/common.h> #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 748a8e48541..7acdfd8ac07 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -52,7 +52,6 @@ #include <mach/serial.h> #include <mach/psc.h> #include <mach/mux.h> -#include <mach/common.h> #define SFFSDR_PHY_MASK (0x2) #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c index a2df5bb7dff..dbcac9c40a2 100644 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -33,6 +33,7 @@ #include <linux/err.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/io.h> #include <mach/dma.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 34ddec081c4..411734422c1 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -41,9 +41,6 @@ #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 -#define TS72XX_NOR_PHYS_BASE 0x60000000 -#define TS72XX_NOR2_PHYS_BASE 0x62000000 - #define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000 #define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000 #define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000 diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 7ee024d3482..aaf1371412a 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void) } } +/************************************************************************* + * NOR flash (TS-7200 only) + *************************************************************************/ static struct physmap_flash_data ts72xx_flash_data = { - .width = 1, + .width = 2, }; static struct resource ts72xx_flash_resource = { - .start = TS72XX_NOR_PHYS_BASE, - .end = TS72XX_NOR_PHYS_BASE + SZ_16M - 1, + .start = EP93XX_CS6_PHYS_BASE, + .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, .flags = IORESOURCE_MEM, }; @@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = { .resource = &ts72xx_flash_resource, }; +static void __init ts72xx_register_flash(void) +{ + if (board_is_ts7200()) + platform_device_register(&ts72xx_flash); +} + static unsigned char ts72xx_rtc_readbyte(unsigned long addr) { __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); @@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = { static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); - if (board_is_ts7200()) - platform_device_register(&ts72xx_flash); + ts72xx_register_flash(); platform_device_register(&ts72xx_rtc_device); ep93xx_register_eth(&ts72xx_eth_data, 1); diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index ce63048d45e..8a947d42a6f 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -17,7 +17,7 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0xffff0000 +#define IO_SPACE_LIMIT 0x0000ffff extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e021a80c2ca..bc74278ed31 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -289,7 +289,7 @@ #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 ) #define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 ) #define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 ) diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 01aa213c0a6..ec1a64f263d 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -206,6 +206,15 @@ static void __init qnap_ts219_init(void) } +static int __init ts219_pci_init(void) +{ + if (machine_is_ts219()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(ts219_pci_init); + MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h index 1d640d075b7..e0f911d9e02 100644 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ b/arch/arm/mach-ks8695/include/mach/hardware.h @@ -17,6 +17,11 @@ #include <asm/sizes.h> /* + * Clocks are derived from MCLK, which is 25Mhz + */ +#define KS8695_CLOCK_RATE 25000000 + +/* * Physical RAM address. */ #define KS8695_SDRAM_PA 0x00000000 diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h index 4682e350369..10f716371bd 100644 --- a/arch/arm/mach-ks8695/include/mach/timex.h +++ b/arch/arm/mach-ks8695/include/mach/timex.h @@ -14,7 +14,8 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -/* timers are derived from MCLK, which is 25MHz */ -#define CLOCK_TICK_RATE 25000000 +#include <mach/hardware.h> + +#define CLOCK_TICK_RATE KS8695_CLOCK_RATE #endif diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index f5ebcc0fcab..78499667eb7 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs static void __init ks8695_pci_preinit(void) { + /* make software reset to avoid freeze if PCI bus was messed up */ + __raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS); + /* stage 1 initialization, subid, subdevice = 0x0001 */ __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID); diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 17a21a291e2..851f2458bf6 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -36,6 +36,14 @@ config MACH_PCM037 Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM037_EET + bool "Support pcm037 EET board extensions" + depends on MACH_PCM037 + help + Add support for PCM037 EET baseboard extensions. If you are using the + OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel + command-line parameter. + config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 0322696bd11..6b9775471be 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o +obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ mx31moboard-marxbot.o diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index 541181090b3..ee331fd6b1b 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -31,6 +31,8 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -46,8 +48,10 @@ #include <mach/mmc.h> #include <mach/ipu.h> #include <mach/mx3fb.h> +#include <mach/mxc_nand.h> #include "devices.h" +#include "crm_regs.h" static int armadillo5x0_pins[] = { /* UART1 */ @@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = { MX31_PIN_FPSHIFT__FPSHIFT, MX31_PIN_DRDY0__DRDY0, IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ +}; +/* + * NAND Flash + */ +static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = { + .width = 1, + .hw_ecc = 1, +}; + +/* + * MTD NOR Flash + */ +static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { + { + .name = "nor.bootloader", + .offset = 0x00000000, + .size = 4*32*1024, + }, { + .name = "nor.kernel", + .offset = MTDPART_OFS_APPEND, + .size = 16*128*1024, + }, { + .name = "nor.userland", + .offset = MTDPART_OFS_APPEND, + .size = 110*128*1024, + }, { + .name = "nor.config", + .offset = MTDPART_OFS_APPEND, + .size = 1*128*1024, + }, +}; + +static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { + .width = 2, + .parts = armadillo5x0_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), +}; + +static struct resource armadillo5x0_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = CS0_BASE_ADDR, + .end = CS0_BASE_ADDR + SZ_64M - 1, +}; + +static struct platform_device armadillo5x0_nor_flash = { + .name = "physmap-flash", + .id = -1, + .num_resources = 1, + .resource = &armadillo5x0_nor_flash_resource, }; /* @@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void) /* Register FB */ mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); + + /* Register NOR Flash */ + mxc_register_device(&armadillo5x0_nor_flash, + &armadillo5x0_nor_flash_pdata); + + /* Register NAND Flash */ + mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata); + + /* set NAND page size to 2k if not configured via boot mode pins */ + __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); } static void __init armadillo5x0_timer_init(void) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index d927eddcad4..9e87e08fb12 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/gpio.h> -#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/common.h> diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 4704405165a..b48581e7ded 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -63,7 +63,7 @@ static struct imxuart_platform_data uart_pdata = { static int devboard_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 641c3d6153a..901fb0166c0 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -67,7 +67,7 @@ static unsigned int marxbot_pins[] = { static int marxbot_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index a17f2e41160..2a2da4739ec 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -94,7 +94,7 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = { static int moboard_sdhc1_get_ro(struct device *dev) { - return gpio_get_value(SDHC1_WP); + return !gpio_get_value(SDHC1_WP); } static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c6f61a1f06c..840cfda341d 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -18,7 +18,7 @@ #include <linux/types.h> #include <linux/init.h> - +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/mtd/plat-ram.h> @@ -33,29 +33,67 @@ #include <linux/irq.h> #include <linux/fsl_devices.h> -#include <mach/hardware.h> +#include <media/soc_camera.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <mach/board-pcm037.h> #include <mach/common.h> +#include <mach/hardware.h> +#include <mach/i2c.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> -#include <mach/board-pcm037.h> +#include <mach/mmc.h> +#include <mach/mx3_camera.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> -#include <mach/mmc.h> -#ifdef CONFIG_I2C_IMX -#include <mach/i2c.h> -#endif #include "devices.h" +#include "pcm037.h" + +static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; + +static int __init pcm037_variant_setup(char *str) +{ + if (!strcmp("eet", str)) + pcm037_instance = PCM037_EET; + else if (strcmp("pcm970", str)) + pr_warning("Unknown pcm037 baseboard variant %s\n", str); + + return 1; +} + +/* Supported values: "pcm970" (default) and "eet" */ +__setup("pcm037_variant=", pcm037_variant_setup); + +enum pcm037_board_variant pcm037_variant(void) +{ + return pcm037_instance; +} + +/* UART1 with RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_handshake_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; + +/* UART1 without RTS/CTS handshake signals */ +static unsigned int pcm037_uart1_pins[] = { + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, +}; static unsigned int pcm037_pins[] = { /* I2C */ MX31_PIN_CSPI2_MOSI__SCL, MX31_PIN_CSPI2_MISO__SDA, + MX31_PIN_CSPI2_SS2__I2C3_SDA, + MX31_PIN_CSPI2_SCLK__I2C3_SCL, /* SDHC1 */ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, @@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CSPI1_SS0__SS0, MX31_PIN_CSPI1_SS1__SS1, MX31_PIN_CSPI1_SS2__SS2, - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, /* UART2 */ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, @@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = { MX31_PIN_D3_SPL__D3_SPL, MX31_PIN_D3_CLS__D3_CLS, MX31_PIN_LCS0__GPI03_23, + /* CSI */ + IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), + MX31_PIN_CSI_D6__CSI_D6, + MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, + MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, + MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, + MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, + MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, + MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, + MX31_PIN_CSI_VSYNC__CSI_VSYNC, }; static struct physmap_flash_data pcm037_flash_data = { @@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { .hw_ecc = 1, }; -#ifdef CONFIG_I2C_IMX static struct imxi2c_platform_data pcm037_i2c_1_data = { .bitrate = 100000, }; +static struct imxi2c_platform_data pcm037_i2c_2_data = { + .bitrate = 20000, +}; + static struct at24_platform_data board_eeprom = { .byte_len = 4096, .page_size = 32, .flags = AT24_FLAG_ADDR16, }; +static int pcm037_camera_power(struct device *dev, int on) +{ + /* disable or enable the camera in X7 or X8 PCM970 connector */ + gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on); + return 0; +} + +static struct i2c_board_info pcm037_i2c_2_devices[] = { + { + I2C_BOARD_INFO("mt9t031", 0x5d), + }, +}; + +static struct soc_camera_link iclink = { + .bus_id = 0, /* Must match with the camera ID */ + .power = pcm037_camera_power, + .board_info = &pcm037_i2c_2_devices[0], + .i2c_adapter_id = 2, + .module_name = "mt9t031", +}; + static struct i2c_board_info pcm037_i2c_devices[] = { - { + { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { @@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = { .type = "pcf8563", } }; -#endif + +static struct platform_device pcm037_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink, + }, +}; /* Not connected by default */ #ifdef PCM970_SDHC_RW_SWITCH @@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pcm970_sdhc1_exit, }; +struct mx3_camera_pdata camera_pdata = { + .dma_dev = &mx3_ipu.dev, + .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, + .mclk_10khz = 2000, +}; + +static int __init pcm037_camera_alloc_dma(const size_t buf_size) +{ + dma_addr_t dma_handle; + void *buf; + int dma; + + if (buf_size < 2 * 1024 * 1024) + return -EINVAL; + + buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_err("%s: cannot allocate camera buffer-memory\n", __func__); + return -ENOMEM; + } + + memset(buf, 0, buf_size); + + dma = dma_declare_coherent_memory(&mx3_camera.dev, + dma_handle, dma_handle, buf_size, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + /* The way we call dma_declare_coherent_memory only a malloc can fail */ + return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; +} + static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, + &pcm037_camera, }; static struct ipu_platform_data mx3_ipu_data = { @@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = { .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, + }, { + /* 240x320 @ 60 Hz */ + .name = "CMEL-OLED", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, }, }; @@ -397,6 +525,14 @@ static void __init mxc_board_init(void) mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), "pcm037"); + if (pcm037_variant() == PCM037_EET) + mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, + ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); + else + mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins, + ARRAY_SIZE(pcm037_uart1_handshake_pins), + "pcm037_uart1"); + platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); @@ -415,18 +551,30 @@ static void __init mxc_board_init(void) } -#ifdef CONFIG_I2C_IMX + /* I2C adapters and devices */ i2c_register_board_info(1, pcm037_i2c_devices, ARRAY_SIZE(pcm037_i2c_devices)); mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data); -#endif + mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data); + mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); if (!gpio_usbotg_hs_activate()) mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + + /* CSI */ + /* Camera power: default - off */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); + if (!ret) + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); + else + iclink.power = NULL; + + if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) + mxc_register_device(&mx3_camera, &camera_pdata); } static void __init pcm037_timer_init(void) @@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .init_machine = mxc_board_init, .timer = &pcm037_timer, MACHINE_END - diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h new file mode 100644 index 00000000000..d6929721a5f --- /dev/null +++ b/arch/arm/mach-mx3/pcm037.h @@ -0,0 +1,11 @@ +#ifndef __PCM037_H__ +#define __PCM037_H__ + +enum pcm037_board_variant { + PCM037_PCM970, + PCM037_EET, +}; + +extern enum pcm037_board_variant pcm037_variant(void); + +#endif diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c new file mode 100644 index 00000000000..8d386000fc4 --- /dev/null +++ b/arch/arm/mach-mx3/pcm037_eet.c @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <mach/common.h> +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +#include <mach/spi.h> +#endif +#include <mach/iomux-mx3.h> + +#include <asm/mach-types.h> + +#include "pcm037.h" +#include "devices.h" + +static unsigned int pcm037_eet_pins[] = { + /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ + IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), + /* GPIO keys */ + IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */ + IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */ + IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */ + IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */ + IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */ + IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */ + IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */ + IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */ + IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */ + IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */ + IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */ + IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */ + IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */ + + /* LEDs */ + IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */ + IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */ + IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */ + IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */ +}; + +/* SPI */ +static struct spi_board_info pcm037_spi_dev[] = { + { + .modalias = "dac124s085", + .max_speed_hz = 400000, + .bus_num = 0, + .chip_select = 0, /* Index in pcm037_spi1_cs[] */ + .mode = SPI_CPHA, + }, +}; + +/* Platform Data for MXC CSPI */ +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; + +struct spi_imx_master pcm037_spi1_master = { + .chipselect = pcm037_spi1_cs, + .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), +}; +#endif + +/* GPIO-keys input device */ +static struct gpio_keys_button pcm037_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_L, + .gpio = 0, + .desc = "Wheel Manual", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_A, + .gpio = 1, + .desc = "Wheel AF", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_V, + .gpio = 2, + .desc = "Wheel View", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_M, + .gpio = 3, + .desc = "Wheel Menu", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_UP, + .gpio = 32, + .desc = "Nav Pad Up", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_RIGHT, + .gpio = 33, + .desc = "Nav Pad Right", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_DOWN, + .gpio = 34, + .desc = "Nav Pad Down", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_LEFT, + .gpio = 35, + .desc = "Nav Pad Left", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_ENTER, + .gpio = 38, + .desc = "Nav Pad Ok", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = KEY_O, + .gpio = 39, + .desc = "Wheel Off", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_FORWARD, + .gpio = 50, + .desc = "Focus Forward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_BACK, + .gpio = 51, + .desc = "Focus Backward", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_MIDDLE, + .gpio = 52, + .desc = "Release Half", + .wakeup = 0, + }, { + .type = EV_KEY, + .code = BTN_EXTRA, + .gpio = 53, + .desc = "Release Full", + .wakeup = 0, + }, +}; + +static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = { + .buttons = pcm037_gpio_keys, + .nbuttons = ARRAY_SIZE(pcm037_gpio_keys), + .rep = 0, /* No auto-repeat */ +}; + +static struct platform_device pcm037_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &pcm037_gpio_keys_platform_data, + }, +}; + +static int eet_init_devices(void) +{ + if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET) + return 0; + + mxc_iomux_setup_multiple_pins(pcm037_eet_pins, + ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet"); + + /* SPI */ + spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master); +#endif + + platform_device_register(&pcm037_gpio_keys_device); + + return 0; +} + +late_initcall(eet_init_devices); diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e70fc7c66bb..ed2a48a9ce7 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -36,7 +36,6 @@ #include <mach/hwa742.h> #include <mach/lcd_mipid.h> #include <mach/mmc.h> -#include <mach/usb.h> #include <mach/clock.h> #define ADS7846_PENDOWN_GPIO 15 @@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot) static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, .dma_mask = 0xffffffff, + .max_freq = 12000000, .slots[0] = { .set_power = nokia770_mmc_set_power, .get_cover_state = nokia770_mmc_get_cover_state, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 0af4d6c85b4..6810b4aeb02 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>); +MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index a2d7814896b..505d98cfe50 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/cpu.h> #include <mach/mcbsp.h> diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 9c3fdcdf76c..8ec2a132904 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -141,7 +141,7 @@ static inline void board_smc91x_init(void) static void __init omap_2430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 496a90e4ea7..ac262cd7450 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -169,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = { static void __init omap_3430sdp_init_irq(void) { - omap2_init_common_hw(hyb18m512160af6_sdrc_params); + omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 57e477bd89c..b0c7402248f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -59,7 +59,7 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); #endif diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 06dfba888b0..dcfc20d0389 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -250,7 +250,7 @@ out: static void __init omap_apollon_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); apollon_init_smc91x(); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3492162a65c..fd00aa03690 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init omap_generic_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index e7d017cdc43..7b1d61d5bb2 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -270,7 +270,7 @@ static void __init h4_init_flash(void) static void __init omap_h4_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d8bc0a7dcb8..ea383f88cb1 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -270,7 +270,7 @@ static inline void __init ldp_init_smsc911x(void) static void __init omap_ldp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); ldp_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 991ac9c3803..e00ba128cec 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -408,6 +409,10 @@ static void __init omap3_beagle_init(void) usb_musb_init(); omap3beagle_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index d3cc145814d..c4b144647dc 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -25,6 +25,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> +#include <linux/usb/otg.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -279,7 +280,7 @@ struct spi_board_info omap3evm_spi_board_info[] = { static void __init omap3_evm_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); omap3evm_init_smc911x(); @@ -307,6 +308,10 @@ static void __init omap3_evm_init(void) ARRAY_SIZE(omap3evm_spi_board_info)); omap_serial_init(); +#ifdef CONFIG_NOP_USB_XCEIV + /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ + usb_nop_xceiv_register(); +#endif usb_musb_init(); ads7846_dev_init(); } diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index e32aa23ce96..864ee3d021f 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,6 +40,7 @@ #include <mach/mcspi.h> #include <mach/usb.h> #include <mach/keypad.h> +#include <mach/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -310,7 +311,8 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -397,6 +399,10 @@ static void __init omap3pandora_init(void) omap3pandora_ads7846_init(); pandora_keys_gpio_init(); usb_musb_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528fbfb..6bce23004aa 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,6 +44,7 @@ #include <mach/gpmc.h> #include <mach/hardware.h> #include <mach/nand.h> +#include <mach/mux.h> #include <mach/usb.h> #include "sdram-micron-mt46h32m32lf-6.h" @@ -51,6 +52,7 @@ #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_PENDOWN 114 #define OVERO_GPIO_BT_NRESET 164 #define OVERO_GPIO_USBH_CPEN 168 #define OVERO_GPIO_USBH_NRESET 183 @@ -146,7 +148,7 @@ static struct platform_device overo_smsc911x_device = { .name = "smsc911x", .id = -1, .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = &overo_smsc911x_resources, + .resource = overo_smsc911x_resources, .dev = { .platform_data = &overo_smsc911x_config, }, @@ -360,7 +362,8 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } @@ -395,6 +398,10 @@ static void __init overo_init(void) overo_ads7846_init(); overo_init_smsc911x(); + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); + if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index da93b86234e..56d931a425f 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, }; +static struct twl4030_usb_data rx51_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data rx51_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = { .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, .madc = &rx51_madc_data, + .usb = &rx51_usb_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, @@ -362,6 +367,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .gpio_irq = 65, .parts = onenand_partitions, .nr_parts = ARRAY_SIZE(onenand_partitions), + .flags = ONENAND_SYNC_READWRITE, }; static void __init board_onenand_init(void) diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 374ff63c3eb..1c9e07fe826 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -61,7 +61,7 @@ static struct omap_board_config_kernel rx51_config[] = { static void __init rx51_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } @@ -75,6 +75,10 @@ static void __init rx51_init(void) omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index bcc0f7632de..427b7b8b123 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -25,7 +25,7 @@ static void __init omap_zoom2_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index b0665f161c0..456e2ad5f62 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -27,6 +27,7 @@ #include <mach/clock.h> #include <mach/clockdomain.h> #include <mach/cpu.h> +#include <mach/prcm.h> #include <asm/div64.h> #include <mach/sdrc.h> @@ -38,8 +39,6 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -#define MAX_CLOCK_ENABLE_WAIT 100000 - /* DPLL rate rounding: minimum DPLL multiplier, divider values */ #define DPLL_MIN_MULTIPLIER 1 #define DPLL_MIN_DIVIDER 1 @@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk) } /** - * omap2_wait_clock_ready - wait for clock to enable - * @reg: physical address of clock IDLEST register - * @mask: value to mask against to determine if the clock is active - * @name: name of the clock (for printk) + * omap2_clk_dflt_find_companion - find companion clock to @clk + * @clk: struct clk * to find the companion clock of + * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in + * @other_bit: u8 ** to return the companion clock bit shift in + * + * Note: We don't need special code here for INVERT_ENABLE for the + * time being since INVERT_ENABLE only applies to clocks enabled by + * CM_CLKEN_PLL * - * Returns 1 if the clock enabled in time, or 0 if it failed to enable - * in roughly MAX_CLOCK_ENABLE_WAIT microseconds. + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's + * just a matter of XORing the bits. + * + * Some clocks don't have companion clocks. For example, modules with + * only an interface clock (such as MAILBOXES) don't have a companion + * clock. Right now, this code relies on the hardware exporting a bit + * in the correct companion register that indicates that the + * nonexistent 'companion clock' is active. Future patches will + * associate this type of code with per-module data structures to + * avoid this issue, and remove the casts. No return value. */ -int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit) { - int i = 0; - int ena = 0; + u32 r; /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes + * it's just a matter of XORing the bits. */ - if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) - ena = mask; - else if (cpu_mask & RATE_IN_343X) - ena = 0; - - /* Wait for lock */ - while (((__raw_readl(reg) & mask) != ena) && - (i++ < MAX_CLOCK_ENABLE_WAIT)) { - udelay(1); - } - - if (i <= MAX_CLOCK_ENABLE_WAIT) - pr_debug("Clock %s stable after %d loops\n", name, i); - else - printk(KERN_ERR "Clock %s didn't enable in %d tries\n", - name, MAX_CLOCK_ENABLE_WAIT); - - - return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0; -}; + r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); + *other_reg = (__force void __iomem *)r; + *other_bit = clk->enable_bit; +} -/* - * Note: We don't need special code here for INVERT_ENABLE - * for the time being since INVERT_ENABLE only applies to clocks enabled by - * CM_CLKEN_PLL +/** + * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk + * @clk: struct clk * to find IDLEST info for + * @idlest_reg: void __iomem ** to return the CM_IDLEST va in + * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in + * + * Return the CM_IDLEST register address and bit shift corresponding + * to the module that "owns" this clock. This default code assumes + * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that + * the IDLEST register address ID corresponds to the CM_*CLKEN + * register address ID (e.g., that CM_FCLKEN2 corresponds to + * CM_IDLEST2). This is not true for all modules. No return value. */ -static void omap2_clk_wait_ready(struct clk *clk) +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit) { - void __iomem *reg, *other_reg, *st_reg; - u32 bit; + u32 r; - /* - * REVISIT: This code is pretty ugly. It would be nice to generalize - * it and pull it into struct clk itself somehow. - */ - reg = clk->enable_reg; + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = clk->enable_bit; +} - /* - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes - * it's just a matter of XORing the bits. - */ - other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN)); +/** + * omap2_module_wait_ready - wait for an OMAP module to leave IDLE + * @clk: struct clk * belonging to the module + * + * If the necessary clocks for the OMAP hardware IP block that + * corresponds to clock @clk are enabled, then wait for the module to + * indicate readiness (i.e., to leave IDLE). This code does not + * belong in the clock code and will be moved in the medium term to + * module-dependent code. No return value. + */ +static void omap2_module_wait_ready(struct clk *clk) +{ + void __iomem *companion_reg, *idlest_reg; + u8 other_bit, idlest_bit; + + /* Not all modules have multiple clocks that their IDLEST depends on */ + if (clk->ops->find_companion) { + clk->ops->find_companion(clk, &companion_reg, &other_bit); + if (!(__raw_readl(companion_reg) & (1 << other_bit))) + return; + } - /* Check if both functional and interface clocks - * are running. */ - bit = 1 << clk->enable_bit; - if (!(__raw_readl(other_reg) & bit)) - return; - st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */ + clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit); - omap2_wait_clock_ready(st_reg, bit, clk->name); + omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name); } -static int omap2_dflt_clk_enable(struct clk *clk) +int omap2_dflt_clk_enable(struct clk *clk) { u32 v; if (unlikely(clk->enable_reg == NULL)) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + pr_err("clock.c: Enable for %s without enable code\n", clk->name); return 0; /* REVISIT: -EINVAL */ } @@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk) __raw_writel(v, clk->enable_reg); v = __raw_readl(clk->enable_reg); /* OCP barrier */ - return 0; -} + if (clk->ops->find_idlest) + omap2_module_wait_ready(clk); -static int omap2_dflt_clk_enable_wait(struct clk *clk) -{ - int ret; - - if (!clk->enable_reg) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); - return 0; /* REVISIT: -EINVAL */ - } - - ret = omap2_dflt_clk_enable(clk); - if (ret == 0) - omap2_clk_wait_ready(clk); - return ret; + return 0; } -static void omap2_dflt_clk_disable(struct clk *clk) +void omap2_dflt_clk_disable(struct clk *clk) { u32 v; @@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk) } const struct clkops clkops_omap2_dflt_wait = { - .enable = omap2_dflt_clk_enable_wait, + .enable = omap2_dflt_clk_enable, .disable = omap2_dflt_clk_disable, + .find_companion = omap2_clk_dflt_find_companion, + .find_idlest = omap2_clk_dflt_find_idlest, }; const struct clkops clkops_omap2_dflt = { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2679ddfa642..9ae7540f8af 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); +int omap2_dflt_clk_enable(struct clk *clk); +void omap2_dflt_clk_disable(struct clk *clk); +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit); +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit); extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 44de0271fc2..bc5d3ac6661 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -30,6 +30,7 @@ #include <mach/clock.h> #include <mach/sram.h> +#include <mach/prcm.h> #include <asm/div64.h> #include <asm/clkdev.h> @@ -43,6 +44,18 @@ static const struct clkops clkops_oscck; static const struct clkops clkops_fixed; +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +/* 2430 I2CHS has non-standard IDLEST register */ +static const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock24xx.h" struct omap_clk { @@ -240,6 +253,26 @@ static void __iomem *prcm_clksrc_ctrl; *-------------------------------------------------------------------------*/ /** + * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the + * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function + * passes back the correct CM_IDLEST register address for I2CHS + * modules. No return value. + */ +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); + *idlest_bit = clk->enable_bit; +} + + +/** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") * @@ -325,8 +358,8 @@ static int omap2_clk_fixed_enable(struct clk *clk) else if (clk == &apll54_ck) cval = OMAP24XX_ST_54M_APLL; - omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, - clk->name); + omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, + clk->name); /* * REVISIT: Should we return an error code if omap2_wait_clock_ready() diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 458f00cdcbe..d19cf7a7d8d 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -2337,7 +2337,7 @@ static struct clk i2c2_fck = { static struct clk i2chs2_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 2, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", @@ -2370,7 +2370,7 @@ static struct clk i2c1_fck = { static struct clk i2chs1_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 1, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 045da923e75..cd7819cc0c9 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -2,7 +2,7 @@ * OMAP3-specific clock framework functions * * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley * Testing and integration fixes by Jouni Högander @@ -41,6 +41,37 @@ static const struct clkops clkops_noncore_dpll_ops; +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +static const struct clkops clkops_omap3430es2_ssi_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_hsotgusb_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_dss_usbhost_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock34xx.h" struct omap_clk { @@ -157,10 +188,13 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), @@ -193,18 +227,21 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), - CLK(NULL, "ssi_ick", &ssi_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapfb", "ick", &dss_ick, CK_343X), + CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), @@ -301,6 +338,73 @@ static struct omap_clk omap34xx_clks[] = { #define SDRC_MPURATE_LOOPS 96 /** + * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift + * from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * Some OMAP modules on OMAP3 ES2+ chips have both initiator and + * target IDLEST bits. For our purposes, we are concerned with the + * target IDLEST bits, which exist at a different bit position than + * the *CLKEN bit position for these modules (DSS and USBHOST) (The + * default find_idlest code assumes that they are at the same + * position.) No return value. + */ +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + /* USBHOST_IDLE has same shift */ + *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different + * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; +} + +/** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk * @@ -725,7 +829,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) u32 unlock_dll = 0; u32 c; unsigned long validrate, sdrcrate, mpurate; - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sdrc_cs0; + struct omap_sdrc_params *sdrc_cs1; + int ret; if (!clk || !rate) return -EINVAL; @@ -743,8 +849,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) else sdrcrate >>= ((clk->rate / rate) >> 1); - sp = omap2_sdrc_get_params(sdrcrate); - if (!sp) + ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); + if (ret) return -EINVAL; if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { @@ -765,12 +871,29 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, validrate); - pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); - - omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div, unlock_dll, c, - sp->mr, rate > clk->rate); + pr_debug("clock: SDRC CS0 timing params used:" + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); + if (sdrc_cs1) + pr_debug("clock: SDRC CS1 timing params used: " + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + + if (sdrc_cs1) + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + else + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + 0, 0, 0, 0); return 0; } diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index e433aec4efd..57cc2725b92 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1568,7 +1568,7 @@ static const struct clksel ssi_ssr_clksel[] = { { .parent = NULL } }; -static struct clk ssi_ssr_fck = { +static struct clk ssi_ssr_fck_3430es1 = { .name = "ssi_ssr_fck", .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, @@ -1581,10 +1581,31 @@ static struct clk ssi_ssr_fck = { .recalc = &omap2_clksel_recalc, }; -static struct clk ssi_sst_fck = { +static struct clk ssi_ssr_fck_3430es2 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap3430es2_ssi_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck_3430es1 = { .name = "ssi_sst_fck", .ops = &clkops_null, - .parent = &ssi_ssr_fck, + .parent = &ssi_ssr_fck_3430es1, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +static struct clk ssi_sst_fck_3430es2 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es2, .fixed_div = 2, .recalc = &omap2_fixed_divisor_recalc, }; @@ -1606,9 +1627,19 @@ static struct clk core_l3_ick = { .recalc = &followparent_recalc, }; -static struct clk hsotgusb_ick = { +static struct clk hsotgusb_ick_3430es1 = { .name = "hsotgusb_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es2 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap3430es2_hsotgusb_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, @@ -1947,7 +1978,7 @@ static struct clk ssi_l4_ick = { .recalc = &followparent_recalc, }; -static struct clk ssi_ick = { +static struct clk ssi_ick_3430es1 = { .name = "ssi_ick", .ops = &clkops_omap2_dflt, .parent = &ssi_l4_ick, @@ -1957,6 +1988,16 @@ static struct clk ssi_ick = { .recalc = &followparent_recalc, }; +static struct clk ssi_ick_3430es2 = { + .name = "ssi_ick", + .ops = &clkops_omap3430es2_ssi_wait, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + /* REVISIT: Technically the TRM claims that this is CORE_CLK based, * but l4_ick makes more sense to me */ @@ -2024,7 +2065,7 @@ static struct clk des1_ick = { }; /* DSS */ -static struct clk dss1_alwon_fck = { +static struct clk dss1_alwon_fck_3430es1 = { .name = "dss1_alwon_fck", .ops = &clkops_omap2_dflt, .parent = &dpll4_m4x2_ck, @@ -2034,6 +2075,16 @@ static struct clk dss1_alwon_fck = { .recalc = &followparent_recalc, }; +static struct clk dss1_alwon_fck_3430es2 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk dss_tv_fck = { .name = "dss_tv_fck", .ops = &clkops_omap2_dflt, @@ -2067,7 +2118,7 @@ static struct clk dss2_alwon_fck = { .recalc = &followparent_recalc, }; -static struct clk dss_ick = { +static struct clk dss_ick_3430es1 = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", .ops = &clkops_omap2_dflt, @@ -2079,6 +2130,18 @@ static struct clk dss_ick = { .recalc = &followparent_recalc, }; +static struct clk dss_ick_3430es2 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + /* CAM */ static struct clk cam_mclk = { @@ -2118,7 +2181,7 @@ static struct clk csi2_96m_fck = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll5_m2_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2129,7 +2192,7 @@ static struct clk usbhost_120m_fck = { static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2141,7 +2204,7 @@ static struct clk usbhost_48m_fck = { static struct clk usbhost_ick = { /* Handles both L3 and L4 clocks */ .name = "usbhost_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 1d3c93bf86d..f3c91a1ca39 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -29,9 +29,9 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 2fd22f9c5f0..54fec53a48e 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = { static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) { struct gpmc_timings t; + u32 reg; + int err; const int t_cer = 15; const int t_avdp = 12; @@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - return gpmc_cs_set_timings(cs, &t); + err = gpmc_cs_set_timings(cs, &t); + if (err) + return err; + + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + + return 0; } static void set_onenand_cfg(void __iomem *onenand_base, int latency, @@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } else if (cfg->flags & ONENAND_SYNC_READWRITE) { sync_read = 1; sync_write = 1; - } + } else + return omap2_onenand_set_async_mode(cs, onenand_base); if (!freq) { /* Very first call freq is not known */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 458990e20c6..a98201cc265 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci) } EXPORT_SYMBOL(omap_chip_is); +int omap_type(void) +{ + u32 val = 0; + + if (cpu_is_omap24xx()) + val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + else if (cpu_is_omap34xx()) + val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); + else { + pr_err("Cannot detect omap type!\n"); + goto out; + } + + val &= OMAP2_DEVICETYPE_MASK; + val >>= 8; + +out: + return val; +} +EXPORT_SYMBOL(omap_type); + + /*----------------------------------------------------------------------------*/ #define OMAP_TAP_IDCODE 0x0204 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3a86b0f6603..e9b9bcb19b4 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -276,14 +276,15 @@ static int __init _omap2_init_reprogram_sdrc(void) return v; } -void __init omap2_init_common_hw(struct omap_sdrc_params *sp) +void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { omap2_mux_init(); #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); - omap2_sdrc_init(sp); + omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); #endif gpmc_init(); diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index fd5b8a5925c..6f71f3730c9 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) return -ENOMEM; /* DSP or IVA2 IRQ */ - mbox_dsp_info.irq = platform_get_irq(pdev, 0); - if (mbox_dsp_info.irq < 0) { + ret = platform_get_irq(pdev, 0); + if (ret < 0) { dev_err(&pdev->dev, "invalid irq resource\n"); - ret = -ENODEV; goto err_dsp; } + mbox_dsp_info.irq = ret; ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); if (ret) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a5c0f0435cd..99b6e154631 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -19,7 +19,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/cpu.h> #include <mach/mcbsp.h> diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 9756a878fd9..3c04c2f1b23 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev) if (i != 0) break; ret = PTR_ERR(reg); + hsmmc[i].vcc = NULL; goto err; } hsmmc[i].vcc = reg; @@ -165,8 +166,13 @@ done: static void twl_mmc_cleanup(struct device *dev) { struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; gpio_free(mmc->slots[0].switch_pin); + for(i = 0; i < ARRAY_SIZE(hsmmc); i++) { + regulator_put(hsmmc[i].vcc); + regulator_put(hsmmc[i].vcc_aux); + } } #ifdef CONFIG_PM @@ -263,8 +269,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd) { int ret = 0; - struct twl_mmc_controller *c = &hsmmc[1]; + struct twl_mmc_controller *c = NULL; struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; + + for (i = 1; i < ARRAY_SIZE(hsmmc); i++) { + if (mmc == hsmmc[i].mmc) { + c = &hsmmc[i]; + break; + } + } + + if (c == NULL) + return -ENODEV; /* If we don't see a Vcc regulator, assume it's a fixed * voltage always-on regulator. diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 026c4fc883a..43d6b92b65f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,6 +486,12 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) + +/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ +MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) }; #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index f7b3baf7667..21201cd4117 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,9 +11,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -extern int omap2_pm_init(void); -extern int omap3_pm_init(void); - #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index db1025562fb..528dbdc26e2 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void) WKUP_MOD, PM_WKEN); } -int __init omap2_pm_init(void) +static int __init omap2_pm_init(void) { u32 l; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 841d4c5ed8b..488d595d8e4 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -39,7 +39,9 @@ struct power_state { struct powerdomain *pwrdm; u32 next_state; +#ifdef CONFIG_SUSPEND u32 saved_state; +#endif struct list_head node; }; @@ -293,6 +295,9 @@ out: local_irq_enable(); } +#ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state; + static int omap3_pm_prepare(void) { disable_hlt(); @@ -321,7 +326,6 @@ static int omap3_pm_suspend(void) restore: /* Restore next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) { - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { printk(KERN_INFO "Powerdomain (%s) didn't enter " @@ -329,6 +333,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); @@ -339,11 +344,11 @@ restore: return ret; } -static int omap3_pm_enter(suspend_state_t state) +static int omap3_pm_enter(suspend_state_t unused) { int ret = 0; - switch (state) { + switch (suspend_state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: ret = omap3_pm_suspend(); @@ -360,12 +365,30 @@ static void omap3_pm_finish(void) enable_hlt(); } +/* Hooks to enable / disable UART interrupts during suspend */ +static int omap3_pm_begin(suspend_state_t state) +{ + suspend_state = state; + omap_uart_enable_irqs(0); + return 0; +} + +static void omap3_pm_end(void) +{ + suspend_state = PM_SUSPEND_ON; + omap_uart_enable_irqs(1); + return; +} + static struct platform_suspend_ops omap_pm_ops = { + .begin = omap3_pm_begin, + .end = omap3_pm_end, .prepare = omap3_pm_prepare, .enter = omap3_pm_enter, .finish = omap3_pm_finish, .valid = suspend_valid_only_mem, }; +#endif /* CONFIG_SUSPEND */ /** @@ -613,6 +636,24 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap3_iva_idle(); omap3_d2d_idle(); } @@ -652,7 +693,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm) return 0; } -int __init omap3_pm_init(void) +static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; int ret; @@ -692,7 +733,9 @@ int __init omap3_pm_init(void) _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, omap34xx_cpu_suspend_sz); +#ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); +#endif /* CONFIG_SUSPEND */ pm_idle = omap3_pm_idle; diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index f945156d558..ced555a4cd1 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/delay.h> #include <mach/common.h> #include <mach/prcm.h> @@ -28,6 +29,8 @@ static void __iomem *prm_base; static void __iomem *cm_base; +#define MAX_MODULE_ENABLE_WAIT 100000 + u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ @@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) } EXPORT_SYMBOL(cm_rmw_mod_reg_bits); +/** + * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness + * @reg: physical address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @name: name of the clock (for printk) + * + * Returns 1 if the module indicated readiness in time, or 0 if it + * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. + */ +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name) +{ + int i = 0; + int ena = 0; + + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + */ + if (cpu_is_omap24xx()) + ena = mask; + else if (cpu_is_omap34xx()) + ena = 0; + else + BUG(); + + /* Wait for lock */ + while (((__raw_readl(reg) & mask) != ena) && + (i++ < MAX_MODULE_ENABLE_WAIT)) + udelay(1); + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("cm: Module associated with clock %s ready after %d " + "loops\n", name, i); + else + pr_err("cm: Module associated with clock %s didn't enable in " + "%d tries\n", name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +}; + void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { prm_base = omap2_globals->prm; diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2045441e838..9e3bd4fa781 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -32,7 +32,7 @@ #include <mach/sdrc.h> #include "sdrc.h" -static struct omap_sdrc_params *sdrc_init_params; +static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; @@ -45,33 +45,49 @@ void __iomem *omap2_sms_base; /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate * @r: SDRC clock rate (in Hz) + * @sdrc_cs0: chip select 0 ram timings ** + * @sdrc_cs1: chip select 1 ram timings ** * * Return pre-calculated values for the SDRC_ACTIM_CTRLA, - * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given - * SDRC clock rate 'r'. These parameters control various timing - * delays in the SDRAM controller that are expressed in terms of the - * number of SDRC clock cycles to wait; hence the clock rate - * dependency. Note that sdrc_init_params must be sorted rate - * descending. Also assumes that both chip-selects use the same - * timing parameters. Returns a struct omap_sdrc_params * upon - * success, or NULL upon failure. + * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01] + * structs,for a given SDRC clock rate 'r'. + * These parameters control various timing delays in the SDRAM controller + * that are expressed in terms of the number of SDRC clock cycles to + * wait; hence the clock rate dependency. + * + * Supports 2 different timing parameters for both chip selects. + * + * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending. + * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size + * as sdrc_init_params_cs_0. + * + * Fills in the struct omap_sdrc_params * for each chip select. + * Returns 0 upon success or -1 upon failure. */ -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1) { - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sp0, *sp1; - if (!sdrc_init_params) - return NULL; + if (!sdrc_init_params_cs0) + return -1; - sp = sdrc_init_params; + sp0 = sdrc_init_params_cs0; + sp1 = sdrc_init_params_cs1; - while (sp->rate && sp->rate != r) - sp++; + while (sp0->rate && sp0->rate != r) { + sp0++; + if (sdrc_init_params_cs1) + sp1++; + } - if (!sp->rate) - return NULL; + if (!sp0->rate) + return -1; - return sp; + *sdrc_cs0 = sp0; + *sdrc_cs1 = sp1; + return 0; } @@ -83,13 +99,15 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) /** * omap2_sdrc_init - initialize SMS, SDRC devices on boot - * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params + * Support for 2 chip selects timings * * Turn on smart idle modes for SDRAM scheduler and controller. * Program a known-good configuration for the SDRC to deal with buggy * bootloaders. */ -void __init omap2_sdrc_init(struct omap_sdrc_params *sp) +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { u32 l; @@ -103,11 +121,15 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) l |= (0x2 << 3); sdrc_write_reg(l, SDRC_SYSCONFIG); - sdrc_init_params = sp; + sdrc_init_params_cs0 = sdrc_cs0; + sdrc_init_params_cs1 = sdrc_cs1; /* XXX Enable SRFRONIDLEREQ here also? */ + /* + * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA + * can cause random memory corruption + */ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | - (1 << SDRC_POWER_PWDENA_SHIFT) | (1 << SDRC_POWER_PAGEPOLICY_SHIFT); sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b094c15bfe4..a7421a50410 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -54,6 +54,7 @@ struct omap_uart_state { struct plat_serial8250_port *p; struct list_head node; + struct platform_device pdev; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) int context_valid; @@ -68,10 +69,9 @@ struct omap_uart_state { #endif }; -static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; static LIST_HEAD(uart_list); -static struct plat_serial8250_port serial_platform_data[] = { +static struct plat_serial8250_port serial_platform_data0[] = { { .membase = IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, @@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data1[] = { + { .membase = IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, @@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data2[] = { + { .membase = IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, @@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) clk_disable(uart->fck); } +static void omap_uart_enable_wakeup(struct omap_uart_state *uart) +{ + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + +static void omap_uart_disable_wakeup(struct omap_uart_state *uart) +{ + /* Clear wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v &= ~uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are cleared */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v &= ~OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, int enable) { @@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { + if (device_may_wakeup(&uart->pdev.dev)) + omap_uart_enable_wakeup(uart); + else + omap_uart_disable_wakeup(uart); + if (!uart->clocked) return; @@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num) /* Check for normal UART wakeup */ if (__raw_readl(uart->wk_st) & uart->wk_mask) omap_uart_block_sleep(uart); - return; } } @@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) return IRQ_NONE; } -static u32 sleep_timeout = DEFAULT_TIMEOUT; - static void omap_uart_idle_init(struct omap_uart_state *uart) { - u32 v; struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; - uart->timeout = sleep_timeout; + uart->timeout = DEFAULT_TIMEOUT; setup_timer(&uart->timer, omap_uart_idle_timer, (unsigned long) uart); mod_timer(&uart->timer, jiffies + uart->timeout); @@ -413,76 +460,101 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - /* Set wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - v = __raw_readl(uart->wk_en); - v |= uart->wk_mask; - __raw_writel(v, uart->wk_en); - } - - /* Ensure IOPAD wake-enables are set */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 v; - - v = omap_ctrl_readw(uart->padconf); - v |= OMAP3_PADCONF_WAKEUPENABLE0; - omap_ctrl_writew(v, uart->padconf); - } - p->flags |= UPF_SHARE_IRQ; ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, "serial idle", (void *)uart); WARN_ON(ret); } -static ssize_t sleep_timeout_show(struct kobject *kobj, - struct kobj_attribute *attr, +void omap_uart_enable_irqs(int enable) +{ + int ret; + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (enable) + ret = request_irq(uart->p->irq, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); + else + free_irq(uart->p->irq, (void *)uart); + } +} + +static ssize_t sleep_timeout_show(struct device *dev, + struct device_attribute *attr, char *buf) { - return sprintf(buf, "%u\n", sleep_timeout / HZ); + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); + + return sprintf(buf, "%u\n", uart->timeout / HZ); } -static ssize_t sleep_timeout_store(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) { - struct omap_uart_state *uart; + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); unsigned int value; if (sscanf(buf, "%u", &value) != 1) { printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); return -EINVAL; } - sleep_timeout = value * HZ; - list_for_each_entry(uart, &uart_list, node) { - uart->timeout = sleep_timeout; - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - else - /* A zero value means disable timeout feature */ - omap_uart_block_sleep(uart); - } + + uart->timeout = value * HZ; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + return n; } -static struct kobj_attribute sleep_timeout_attr = - __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); - +DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); +#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { + { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data0, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data1, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = serial_platform_data2, + }, + }, }, }; void __init omap_serial_init(void) { - int i, err; + int i; const struct omap_uart_config *info; char name[16]; @@ -496,14 +568,12 @@ void __init omap_serial_init(void) if (info == NULL) return; - if (cpu_is_omap44xx()) { - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) - serial_platform_data[i].irq += 32; - } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; struct omap_uart_state *uart = &omap_uart[i]; + struct platform_device *pdev = &uart->pdev; + struct device *dev = &pdev->dev; + struct plat_serial8250_port *p = dev->platform_data; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -531,20 +601,21 @@ void __init omap_serial_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add(&uart->node, &uart_list); + list_add_tail(&uart->node, &uart_list); + + if (cpu_is_omap44xx()) + p->irq += 32; omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); - } - - err = platform_device_register(&serial_device); - -#ifdef CONFIG_PM - if (!err) - err = sysfs_create_file(&serial_device.dev.kobj, - &sleep_timeout_attr.attr); -#endif + if (WARN_ON(platform_device_register(pdev))) + continue; + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); + } + } } - diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index f41f8d96ddb..82aa4a3d160 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -36,7 +36,7 @@ .text -/* r4 parameters */ +/* r1 parameters */ #define SDRC_NO_UNLOCK_DLL 0x0 #define SDRC_UNLOCK_DLL 0x1 @@ -58,7 +58,6 @@ /* SDRC_POWER bit settings */ #define SRFRONIDLEREQ_MASK 0x40 -#define PWDENA_MASK 0x4 /* CM_IDLEST1_CORE bit settings */ #define ST_SDRC_MASK 0x2 @@ -71,41 +70,72 @@ /* * omap3_sram_configure_core_dpll - change DPLL3 M2 divider - * r0 = new SDRC_RFR_CTRL register contents - * r1 = new SDRC_ACTIM_CTRLA register contents - * r2 = new SDRC_ACTIM_CTRLB register contents - * r3 = new M2 divider setting (only 1 and 2 supported right now) - * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for + * + * Params passed in registers: + * r0 = new M2 divider setting (only 1 and 2 supported right now) + * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for * SDRC rates < 83MHz - * r5 = number of MPU cycles to wait for SDRC to stabilize after + * r2 = number of MPU cycles to wait for SDRC to stabilize after * reprogramming the SDRC when switching to a slower MPU speed - * r6 = new SDRC_MR_0 register value - * r7 = increasing SDRC rate? (1 = yes, 0 = no) + * r3 = increasing SDRC rate? (1 = yes, 0 = no) + * + * Params passed via the stack. The needed params will be copied in SRAM + * before use by the code in SRAM (SDRAM is not accessible during SDRC + * reconfiguration): + * new SDRC_RFR_CTRL_0 register contents + * new SDRC_ACTIM_CTRL_A_0 register contents + * new SDRC_ACTIM_CTRL_B_0 register contents + * new SDRC_MR_0 register value + * new SDRC_RFR_CTRL_1 register contents + * new SDRC_ACTIM_CTRL_A_1 register contents + * new SDRC_ACTIM_CTRL_B_1 register contents + * new SDRC_MR_1 register value * + * If the param SDRC_RFR_CTRL_1 is 0, the parameters + * are not programmed into the SDRC CS1 registers */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack - ldr r4, [sp, #52] @ pull extra args off the stack - ldr r5, [sp, #56] @ load extra args from the stack - ldr r6, [sp, #60] @ load extra args from the stack - ldr r7, [sp, #64] @ load extra args from the stack + + @ pull the extra args off the stack + @ and store them in SRAM + ldr r4, [sp, #52] + str r4, omap_sdrc_rfr_ctrl_0_val + ldr r4, [sp, #56] + str r4, omap_sdrc_actim_ctrl_a_0_val + ldr r4, [sp, #60] + str r4, omap_sdrc_actim_ctrl_b_0_val + ldr r4, [sp, #64] + str r4, omap_sdrc_mr_0_val + ldr r4, [sp, #68] + str r4, omap_sdrc_rfr_ctrl_1_val + cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_params @ do not use cs1 params + ldr r4, [sp, #72] + str r4, omap_sdrc_actim_ctrl_a_1_val + ldr r4, [sp, #76] + str r4, omap_sdrc_actim_ctrl_b_1_val + ldr r4, [sp, #80] + str r4, omap_sdrc_mr_1_val +skip_cs1_params: dsb @ flush buffered writes to interconnect - cmp r7, #1 @ if increasing SDRC clk rate, + + cmp r3, #1 @ if increasing SDRC clk rate, bleq configure_sdrc @ program the SDRC regs early (for RFR) - cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state + cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state bleq unlock_dll blne lock_dll bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC bl configure_core_dpll @ change the DPLL3 M2 divider + mov r12, r2 + bl wait_clk_stable @ wait for SDRC to stabilize bl enable_sdrc @ take SDRC out of idle - cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change + cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock blne wait_dll_lock - cmp r7, #1 @ if increasing SDRC clk rate, + cmp r3, #1 @ if increasing SDRC clk rate, beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now - mov r12, r5 - bl wait_clk_stable @ wait for SDRC to stabilize return_to_sdram: isb @ prevent speculative exec past here mov r0, #0 @ return value @@ -113,7 +143,7 @@ return_to_sdram: unlock_dll: ldr r11, omap3_sdrc_dlla_ctrl ldr r12, [r11] - and r12, r12, #FIXEDDELAY_MASK + bic r12, r12, #FIXEDDELAY_MASK orr r12, r12, #FIXEDDELAY_DEFAULT orr r12, r12, #DLLIDLE_MASK str r12, [r11] @ (no OCP barrier needed) @@ -129,7 +159,6 @@ sdram_in_selfrefresh: ldr r12, [r11] @ read the contents of SDRC_POWER mov r9, r12 @ keep a copy of SDRC_POWER bits orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle - bic r12, r12, #PWDENA_MASK @ clear PWDENA str r12, [r11] @ write back to SDRC_POWER register ldr r12, [r11] @ posted-write barrier for SDRC idle_sdrc: @@ -149,7 +178,7 @@ configure_core_dpll: ldr r12, [r11] ldr r10, core_m2_mask_val @ modify m2 for core dpll and r12, r12, r10 - orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT + orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT str r12, [r11] ldr r12, [r11] @ posted-write barrier for CM bx lr @@ -187,15 +216,34 @@ wait_dll_unlock: bne wait_dll_unlock bx lr configure_sdrc: - ldr r11, omap3_sdrc_rfr_ctrl - str r0, [r11] - ldr r11, omap3_sdrc_actim_ctrla - str r1, [r11] - ldr r11, omap3_sdrc_actim_ctrlb - str r2, [r11] + ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM + ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM + str r12, [r11] @ store + ldr r12, omap_sdrc_actim_ctrl_a_0_val + ldr r11, omap3_sdrc_actim_ctrl_a_0 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_0_val + ldr r11, omap3_sdrc_actim_ctrl_b_0 + str r12, [r11] + ldr r12, omap_sdrc_mr_0_val ldr r11, omap3_sdrc_mr_0 - str r6, [r11] - ldr r6, [r11] @ posted-write barrier for SDRC + str r12, [r11] + ldr r12, omap_sdrc_rfr_ctrl_1_val + cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_prog @ do not program cs1 params + ldr r11, omap3_sdrc_rfr_ctrl_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_a_1_val + ldr r11, omap3_sdrc_actim_ctrl_a_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_1_val + ldr r11, omap3_sdrc_actim_ctrl_b_1 + str r12, [r11] + ldr r12, omap_sdrc_mr_1_val + ldr r11, omap3_sdrc_mr_1 + str r12, [r11] +skip_cs1_prog: + ldr r12, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: @@ -206,14 +254,40 @@ omap3_cm_idlest1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) omap3_cm_iclken1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) -omap3_sdrc_rfr_ctrl: + +omap3_sdrc_rfr_ctrl_0: .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) -omap3_sdrc_actim_ctrla: +omap3_sdrc_rfr_ctrl_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1) +omap3_sdrc_actim_ctrl_a_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) -omap3_sdrc_actim_ctrlb: +omap3_sdrc_actim_ctrl_a_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1) +omap3_sdrc_actim_ctrl_b_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_actim_ctrl_b_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1) omap3_sdrc_mr_0: .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) +omap3_sdrc_mr_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1) +omap_sdrc_rfr_ctrl_0_val: + .word 0xDEADBEEF +omap_sdrc_rfr_ctrl_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_1_val: + .word 0xDEADBEEF +omap_sdrc_mr_0_val: + .word 0xDEADBEEF +omap_sdrc_mr_1_val: + .word 0xDEADBEEF + omap3_sdrc_dlla_status: .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) omap3_sdrc_dlla_ctrl: @@ -223,3 +297,4 @@ core_m2_mask_val: ENTRY(omap3_sram_configure_core_dpll_sz) .word . - omap3_sram_configure_core_dpll + diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index d85296dc896..739e59e8025 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -155,20 +155,6 @@ static struct platform_device musb_device = { .resource = musb_resources, }; -#ifdef CONFIG_NOP_USB_XCEIV -static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32); - -static struct platform_device nop_xceiv_device = { - .name = "nop_usb_xceiv", - .id = -1, - .dev = { - .dma_mask = &nop_xceiv_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = NULL, - }, -}; -#endif - void __init usb_musb_init(void) { if (cpu_is_omap243x()) @@ -183,13 +169,6 @@ void __init usb_musb_init(void) */ musb_plat.clock = "ick"; -#ifdef CONFIG_NOP_USB_XCEIV - if (platform_device_register(&nop_xceiv_device) < 0) { - printk(KERN_ERR "Unable to register NOP-XCEIV device\n"); - return; - } -#endif - if (platform_device_register(&musb_device) < 0) { printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); return; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 63b10d9bb1d..9cd09465a0e 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1141,12 +1141,16 @@ struct power_supply_info em_x270_psy_info = { static void em_x270_battery_low(void) { +#if defined(CONFIG_APM_EMULATION) apm_queue_event(APM_LOW_BATTERY); +#endif } static void em_x270_battery_critical(void) { +#if defined(CONFIG_APM_EMULATION) apm_queue_event(APM_CRITICAL_SUSPEND); +#endif } struct da9030_battery_info em_x270_batterty_info = { diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index ae8441192ef..7139e0dc26d 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -567,9 +567,9 @@ #define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) #define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) -#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) -#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) -#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) +#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, AF0, DS01X) +#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, AF0, DS01X) +#define ULPI_STP MFP_CFG_DRV(ULPI_STP, AF0, DS01X) #endif /* CONFIG_CPU_PXA310 */ #endif /* __ASM_ARCH_MFP_PXA300_H */ diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index ed70f281dd0..169fcc18154 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -128,6 +128,10 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO38_GPIO, /* wifi ready */ GPIO81_GPIO, /* wifi reset */ + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* HDD */ GPIO98_GPIO, /* HDD reset */ GPIO115_GPIO, /* HDD power */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index aae64a12a73..33f726ff55e 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -111,6 +111,10 @@ static unsigned long palmt5_pin_config[] __initdata = { /* PWM */ GPIO16_PWM0_OUT, + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* MISC */ GPIO10_GPIO, /* hotsync button */ GPIO90_GPIO, /* power detect */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 6c15d84bde5..83d02087958 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -127,6 +127,10 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO76_LCD_PCLK, GPIO77_LCD_BIAS, + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + /* MISC. */ GPIO10_GPIO, /* hotsync button */ GPIO12_GPIO, /* power detect */ diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 6f678d93bf4..09b7b1a10ca 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ - INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c index a06f19edebb..753ec4df17b 100644 --- a/arch/arm/mach-pxa/treo680.c +++ b/arch/arm/mach-pxa/treo680.c @@ -409,7 +409,7 @@ err1: static void treo680_irda_shutdown(struct device *dev) { - gpio_free(GPIO_NR_TREO680_AMP_EN); + gpio_free(GPIO_NR_TREO680_IR_EN); } static struct pxaficp_platform_data treo680_ficp_info = { diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index cefd1c0a854..84095440a87 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -197,10 +197,12 @@ static void __init zylonite_detect_lcd_panel(void) for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { id = id << 1; gpio = mfp_to_gpio(lcd_detect_pins[i]); + gpio_request(gpio, "LCD_ID_PINS"); gpio_direction_input(gpio); if (gpio_get_value(gpio)) id = id | 0x1; + gpio_free(gpio); } /* lcd id, flush out bit 1 */ diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index cc5a2283360..60d08f23f5e 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -176,10 +176,12 @@ static void __init zylonite_detect_lcd_panel(void) for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { id = id << 1; gpio = mfp_to_gpio(lcd_detect_pins[i]); + gpio_request(gpio, "LCD_ID_PINS"); gpio_direction_input(gpio); if (gpio_get_value(gpio)) id = id | 0x1; + gpio_free(gpio); } /* lcd id, flush out bit 1 */ diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 9ea9c05093c..facbd49eec6 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = { static struct i2c_board_info realview_i2c_board_info[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), - .type = "ds1338", + I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 41bb65d5b91..d336ac42289 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -139,4 +139,23 @@ config MACH_QT2410 help Say Y here if you are using the Armzone QT2410 +config MACH_NEO1973_GTA01 + bool "FIC Neo1973 GSM Phone (GTA01 Hardware)" + select CPU_S3C2410 + select MACH_NEO1973 + select S3C_DEV_USB_HOST + select MFD_PCF50606 + select INPUT_PCF50606_PMU + select PCF50606_ADC + select PCF50606_GPIO + select RTC_DRV_PCF50606 + select REGULATOR_PCF50606 + select CHARGER_PCF50606 + select PCF50606_WATCHDOG + select POWER_SUPPLY + select BATTERY_GTA01 + select S3C24XX_ADC + help + Say Y here if you are using the FIC Neo1973 GSM Phone + endmenu diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index fca02f82711..ed3939d2cf7 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o # machine additions obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o +obj-$(CONFIG_MACH_NEO1973_GTA01) += mach-gta01.o diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h index 8fe192081d3..f8b879a7973 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h @@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) return NULL; chip = &s3c24xx_gpios[pin/32]; - return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL; + return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL; } #endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/gta01.h b/arch/arm/mach-s3c2410/include/mach/gta01.h new file mode 100644 index 00000000000..673a1161105 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/gta01.h @@ -0,0 +1,67 @@ +#ifndef _GTA01_H +#define _GTA01_H + +#include <mach/regs-gpio.h> +#include <mach/irqs.h> + +/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ +#define GTA01v3_SYSTEM_REV 0x00000130 +#define GTA01v4_SYSTEM_REV 0x00000140 +#define GTA01Bv2_SYSTEM_REV 0x00000220 +#define GTA01Bv3_SYSTEM_REV 0x00000230 +#define GTA01Bv4_SYSTEM_REV 0x00000240 + +/* !!!!!!!!!!! */ +#define S3C_SYSTEM_REV_ATAG GTA01Bv2_SYSTEM_REV + +/* Backlight */ + +/* Definitions common to all revisions */ +#define GTA01_GPIO_BACKLIGHT S3C2410_GPB(0) +#define GTA01_GPIO_GPS_PWRON S3C2410_GPB(1) +#define GTA01_GPIO_MODEM_RST S3C2410_GPB(6) +#define GTA01_GPIO_MODEM_ON S3C2410_GPB(7) +#define GTA01_GPIO_LCD_RESET S3C2410_GPC(6) +#define GTA01_GPIO_PMU_IRQ S3C2410_GPG(8) +#define GTA01_GPIO_JACK_INSERT S3C2410_GPF(4) +#define GTA01_GPIO_nSD_DETECT S3C2410_GPF(5) +#define GTA01_GPIO_AUX_KEY S3C2410_GPF(6) +#define GTA01_GPIO_HOLD_KEY S3C2410_GPF(7) + +#define GTA01_IRQ_MODEM IRQ_EINT1 +#define GTA01_IRQ_JACK_INSERT IRQ_EINT4 +#define GTA01_IRQ_nSD_DETECT IRQ_EINT5 +#define GTA01_IRQ_AUX_KEY IRQ_EINT6 + +/* GTA01v3 */ +#define GTA01v3_GPIO_nGSM_EN S3C2410_GPG(9) + +/* GTA01v4 */ +#define GTA01_GPIO_MODEM_DNLOAD S3C2410_GPG(0) + +/* GTA01Bv2 */ +#define GTA01Bv2_GPIO_nGSM_EN S3C2410_GPF(2) +#define GTA01Bv2_GPIO_VIBRATOR_ON S3C2410_GPB(10) +#define GTA01Bv2_IRQ_PCF50606 IRQ_EINT16 + +/* GTA01Bv3 */ +#define GTA01_GPIO_GPS_EN_3V3 S3C2410_GPG(9) + +#define GTA01_GPIO_SDMMC_ON S3C2410_GPB(2) +#define GTA01_GPIO_BT_EN S3C2410_GPB(5) +#define GTA01_GPIO_USB_PULLUP S3C2410_GPB(9) + +#define GTA01_GPIO_GPS_EN_2V8 S3C2410_GPG(9) +#define GTA01_GPIO_GPS_EN_3V S3C2410_GPG(10) +#define GTA01_GPIO_GPS_RESET S3C2410_GPC(0) + +/* GTA01Bv4 */ +#define GTA01Bv4_GPIO_nNAND_WP S3C2410_GPA(16) +#define GTA01Bv4_GPIO_VIBRATOR_ON S3C2410_GPB(3) +#define GTA01Bv4_GPIO_PMU_IRQ S3C2410_GPG(1) + +#define GTA01Bv4_IRQ_PCF50606 IRQ_EINT9 + +extern struct pcf50606 *gta01_pcf; + +#endif /* _GTA01_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 2a2384ffa7b..b6d2c2adbcf 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -153,9 +153,9 @@ #define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) #ifdef CONFIG_CPU_S3C2443 -#define NR_IRQS (IRQ_S3C2443_AC97+1) +#define S3C2410_NR_INTERNAL_IRQS (IRQ_S3C2443_AC97+1) #else -#define NR_IRQS (IRQ_S3C2440_AC97+1) +#define S3C2410_NR_INTERNAL_IRQS (IRQ_S3C2440_AC97+1) #endif /* compatibility define. */ @@ -167,4 +167,22 @@ /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ #define FIQ_START IRQ_EINT0 +/* Board specific IRQs + * If your board needs a extra set of IRQ numbers add it to the list here. + * Make sure that the numbers are kept in descending, so if multiple boards are + * selected the maximum will be used and there are enough IRQ numbers available + * for each board. + */ + +#if defined(CONFIG_MACH_NEO1973_GTA02) +#define S3C2410_NR_BOARD_IRQS 9 +#else +#define S3C2410_NR_BOARD_IRQS 0 +#endif + +#define S3C2410_BOARD_IRQ_START S3C2410_NR_INTERNAL_IRQS +#define S3C2410_BOARD_IRQ_END (S3C2410_BOARD_IRQ_START + S3C2410_NR_BOARD_IRQS) + +#define NR_IRQS S3C2410_BOARD_IRQ_END + #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h new file mode 100644 index 00000000000..ac0c727d155 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/ts.h @@ -0,0 +1,35 @@ +/* arch/arm/mach-s3c2410/include/mach/ts.h + * + * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Changelog: + * 24-Mar-2005 RTP Created file + * 03-Aug-2005 RTP Renamed to ts.h + */ + +#ifndef __ASM_ARM_TS_H +#define __ASM_ARM_TS_H + +#include <linux/input/touchscreen/ts_filter.h> + +struct s3c2410_ts_mach_info { + /* Touchscreen delay. */ + int delay; + /* Prescaler value. */ + int presc; + /* + * Null-terminated array of pointers to filter APIs and configurations + * we want to use. In the same order they will be applied. + */ + const struct ts_filter_chain_configuration *filter_config; +}; + +void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info); + +#endif /* __ASM_ARM_TS_H */ diff --git a/arch/arm/mach-s3c2410/mach-gta01.c b/arch/arm/mach-s3c2410/mach-gta01.c new file mode 100644 index 00000000000..e9b73a1ce7d --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-gta01.c @@ -0,0 +1,973 @@ +/* + * linux/arch/arm/mach-s3c2410/mach-gta01.c + * + * S3C2410 Machine Support for the FIC Neo1973 GTA01 + * + * Copyright (C) 2006-2007 by Openmoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/serial_core.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/host.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <linux/mmc/host.h> + +#include <linux/mfd/pcf50606/core.h> +#include <linux/mfd/pcf50606/pmic.h> +#include <linux/mfd/pcf50606/mbc.h> +#include <linux/mfd/pcf50606/adc.h> + +#include <linux/regulator/machine.h> +#include <linux/regulator/consumer.h> + + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/io.h> +#include <asm/mach-types.h> + +#include <mach/regs-gpio.h> +#include <mach/gpio-fns.h> +#include <mach/fb.h> + +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> + +#include <mach/gta01.h> + +#include <plat/regs-serial.h> +#include <plat/nand.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/udc.h> +#include <plat/iic.h> +#include <plat/mci.h> +#include <plat/usb-control.h> +/*#include <mach/neo1973-pm-gsm.h>*/ + +#include <linux/jbt6k74.h> + +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/pwm_backlight.h> +#include <linux/leds_pwm.h> + +#include <linux/gpio.h> + +#include <mach/ts.h> +#include <linux/input/touchscreen/ts_filter_chain.h> +#ifdef CONFIG_TOUCHSCREEN_FILTER +#include <linux/input/touchscreen/ts_filter_linear.h> +#include <linux/input/touchscreen/ts_filter_mean.h> +#include <linux/input/touchscreen/ts_filter_median.h> +#include <linux/input/touchscreen/ts_filter_group.h> +#endif + +static void gta01_pmu_attach_child_devices(struct pcf50606 *pcf); + +static struct map_desc gta01_iodesc[] __initdata = { + { + .virtual = 0xe0000000, + .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000), + .length = SZ_1M, + .type = MT_DEVICE + }, +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE +/* UFCON for the gta01 sets the FIFO trigger level at 4, not 8 */ +#define UFCON_GTA01_PORT0 S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg gta01_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON_GTA01_PORT0, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +/* TODO */ +static void gta01_pmu_event_callback(struct pcf50606 *pcf, int irq) +{ + /*TODO : Handle ACD here */ +} +#if 0 +/* FIXME : Goes away when ACD is handled above */ +static int pmu_callback(struct device *dev, unsigned int feature, + enum pmu_event event) +{ + switch (feature) { + case PCF50606_FEAT_ACD: + switch (event) { + case PMU_EVT_INSERT: + pcf50606_charge_fast(pcf50606_global, 1); + break; + case PMU_EVT_REMOVE: + pcf50606_charge_fast(pcf50606_global, 0); + break; + default: + break; + } + break; + default: + break; + } + + return 0; +} +#endif +struct pcf50606 *gta01_pcf; + +static struct platform_device gta01_pm_gsm_dev = { + .name = "neo1973-pm-gsm", +}; + +static struct platform_device gta01_pm_bt_dev = { + .name = "neo1973-pm-bt", +}; +static struct platform_device gta01_pm_gps_dev = { + .name = "neo1973-pm-gps", +}; + +static struct regulator_consumer_supply ioreg_consumers[] = { + { + .dev = >a01_pm_gps_dev.dev, + .supply = "GPS_2V8", + }, +}; + +static struct regulator_consumer_supply d1reg_consumers[] = { + { + .dev = >a01_pm_gps_dev.dev, + .supply = "GPS_3V", + }, + { + .dev = >a01_pm_bt_dev.dev, + .supply = "BT_3V1", + }, +}; + +static struct regulator_consumer_supply dcd_consumers[] = { + { + .dev = >a01_pm_gps_dev.dev, + .supply = "GPS_3V3", + }, + { + .dev = >a01_pm_gps_dev.dev, + .supply = "GPS_1V5", + }, +}; + +static struct regulator_consumer_supply d2reg_consumers[] = { + { + .dev = >a01_pm_gps_dev.dev, + .supply = "GPS_2V5", + }, + { + .dev = &s3c_device_sdi.dev, + .supply = "SD_3V3", + }, +}; + +#if 0 +/* This will come with 2.6.32. Don't forget to uncomment it then. */ +static struct regulator_consumer_supply lpreg_consumers[] = { + REGULATOR_SUPPLY("VDC", "jbt6k74"), + REGULATOR_SUPPLY("VDDIO", "jbt6k74"), +}; +#else +static struct regulator_consumer_supply lpreg_consumers[] = { + { .supply = "VDC", }, + { .supply = "VDDIO", }, +}; +#endif + +#if 0 + +static int gta01_bat_get_charging_status(void) +{ + struct pcf50606 *pcf = gta01_pcf; + u8 mbcc1, chgmod; + + mbcc1 = pcf50606_reg_read(pcf, PCF50606_REG_MBCC1); + chgmod = mbcc1 & PCF50606_MBCC1_CHGMOD_MASK; + + if (chgmod == PCF50606_MBCC1_CHGMOD_IDLE) + return 0; + else + return 1; +} + +static int gta01_bat_get_voltage(void) +{ + struct pcf50606 *pcf = gta01_pcf; + u16 adc, mv = 0; + + adc = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_BATVOLT_RES); + mv = (adc * 6000) / 1024; + + return mv * 1000; +} + +static int gta01_bat_get_current(void) +{ + struct pcf50606 *pcf = gta01_pcf; + u16 adc_battvolt, adc_adcin1; + s32 res; + + adc_battvolt = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_BATVOLT_SUBTR); + adc_adcin1 = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_ADCIN1_SUBTR); + res = (adc_battvolt - adc_adcin1) * 2400; + + /*rsense is 220 milli */ + return (res * 1000) / (220 * 1024) * 1000; +} + +static struct gta01_bat_platform_data gta01_bat_pdata = { + .get_charging_status = gta01_bat_get_charging_status, + .get_voltage = gta01_bat_get_voltage, + .get_current = gta01_bat_get_current, +}; + +static struct platform_device gta01_bat = { + .name = "gta01_battery", + .id = -1, + .dev = { + .platform_data = >a01_bat_pdata, + } +}; +#endif + +static void __devinit gta01_pcf_probe_done(struct pcf50606 *pcf) +{ + gta01_pcf = pcf; + + gta01_pmu_attach_child_devices(pcf); +} + +static int gps_registered_regulators = 0; + +static void gta01_pmu_regulator_registered(struct pcf50606 *pcf, int id) +{ + switch(id) { + case PCF50606_REGULATOR_D1REG: + platform_device_register(>a01_pm_bt_dev); + gps_registered_regulators++; + break; + case PCF50606_REGULATOR_D2REG: + gps_registered_regulators++; + break; + case PCF50606_REGULATOR_IOREG: + case PCF50606_REGULATOR_DCD: + gps_registered_regulators++; + break; + } + + /* All GPS related regulators registered ? */ + if (gps_registered_regulators == 4) + platform_device_register(>a01_pm_gps_dev); +} + +static struct pcf50606_platform_data gta01_pcf_pdata = { + .resumers = { + [0] = PCF50606_INT1_ALARM | + PCF50606_INT1_ONKEYF | + PCF50606_INT1_EXTONR, + [1] = PCF50606_INT2_CHGWD10S | + PCF50606_INT2_CHGPROT | + PCF50606_INT2_CHGERR, + [2] = PCF50606_INT3_LOWBAT | + PCF50606_INT3_HIGHTMP | + PCF50606_INT3_ACDINS, + }, + .mbc_event_callback = gta01_pmu_event_callback, + .reg_init_data = { + /* BT, GPS */ + [PCF50606_REGULATOR_D1REG] = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(d1reg_consumers), + .consumer_supplies = d1reg_consumers, + }, + /* GPS */ + [PCF50606_REGULATOR_D2REG] = { + .constraints = { + .min_uV = 1650000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(d2reg_consumers), + .consumer_supplies = d2reg_consumers, + + }, + /* RTC/Standby */ + [PCF50606_REGULATOR_D3REG] = { + .constraints = { + .min_uV = 1800000, + .max_uV = 2100000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, + .num_consumer_supplies = 0, + }, + /* GPS */ + [PCF50606_REGULATOR_DCD] = { + .constraints = { + .min_uV = 1500000, + .max_uV = 1500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(dcd_consumers), + .consumer_supplies = dcd_consumers, + }, + + /* S3C2410 Memory and IO, Vibrator, RAM, NAND, AMP, SD Card */ + [PCF50606_REGULATOR_DCDE] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, + .num_consumer_supplies = 0, + }, + /* SoC */ + [PCF50606_REGULATOR_DCUD] = { + .constraints = { + .min_uV = 2100000, + .max_uV = 2100000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, + .num_consumer_supplies = 0, + }, + /* Codec, GPS */ + [PCF50606_REGULATOR_IOREG] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(ioreg_consumers), + .consumer_supplies = ioreg_consumers, + + }, + /* LCM */ + [PCF50606_REGULATOR_LPREG] = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(lpreg_consumers), + .consumer_supplies = lpreg_consumers, + }, + }, + .probe_done = gta01_pcf_probe_done, + .regulator_registered = gta01_pmu_regulator_registered, +}; + +static void mangle_pmu_pdata_by_system_rev(void) +{ + struct regulator_init_data *reg_init_data; + + reg_init_data = gta01_pcf_pdata.reg_init_data; + + switch (S3C_SYSTEM_REV_ATAG) { + case GTA01Bv4_SYSTEM_REV: + /* FIXME : gta01_pcf_pdata.used_features |= PCF50606_FEAT_ACD; */ + break; + case GTA01Bv3_SYSTEM_REV: + case GTA01Bv2_SYSTEM_REV: + reg_init_data[PCF50606_REGULATOR_D3REG].constraints.state_mem.enabled = 1; + break; + default: + break; + } +} + +static void gta01_power_off(void) +{ + pcf50606_reg_write(gta01_pcf, PCF50606_REG_OOCC1, + PCF50606_OOCC1_GOSTDBY); +} + +/* LCD driver info */ + +/* Configuration for 480x640 toppoly TD028TTEC1. + * Do not mark this as __initdata or it will break! */ +static struct s3c2410fb_display gta01_displays[] = { + { + .type = S3C2410_LCDCON1_TFT, + .width = 43, + .height = 58, + .xres = 480, + .yres = 640, + .bpp = 16, + + .pixclock = 40000, /* HCLK/4 */ + .left_margin = 104, + .right_margin = 8, + .hsync_len = 8, + .upper_margin = 2, + .lower_margin = 16, + .vsync_len = 2, + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + { + .type = S3C2410_LCDCON1_TFT, + .width = 43, + .height = 58, + .xres = 480, + .yres = 640, + .bpp = 32, + + .pixclock = 40000, /* HCLK/4 */ + .left_margin = 104, + .right_margin = 8, + .hsync_len = 8, + .upper_margin = 2, + .lower_margin = 16, + .vsync_len = 2, + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + { + .type = S3C2410_LCDCON1_TFT, + .width = 43, + .height = 58, + .xres = 240, + .yres = 320, + .bpp = 16, + + .pixclock = 40000, /* HCLK/4 */ + .left_margin = 104, + .right_margin = 8, + .hsync_len = 8, + .upper_margin = 2, + .lower_margin = 16, + .vsync_len = 2, + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, +}; + +static struct s3c2410fb_mach_info gta01_lcd_cfg __initdata = { + .displays = gta01_displays, + .num_displays = ARRAY_SIZE(gta01_displays), + .default_display = 0, + + .lpcsel = ((0xCE6) & ~7) | 1<<4, +}; + +static struct s3c2410_nand_set gta01_nand_sets[] = { + [0] = { + .name = "neo1973-nand", + .nr_chips = 1, +/* .flags = S3C2410_NAND_BBT,*/ + }, +}; + +static struct s3c2410_platform_nand gta01_nand_info = { + .tacls = 20, + .twrph0 = 60, + .twrph1 = 20, + .nr_sets = ARRAY_SIZE(gta01_nand_sets), + .sets = gta01_nand_sets, +}; + +/* MMC */ + +static void gta01_mmc_set_power(unsigned char power_mode, unsigned short vdd) +{ + printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u)\n", + power_mode, vdd); + + switch (power_mode) { + case MMC_POWER_OFF: + gpio_set_value(GTA01_GPIO_SDMMC_ON, 1); + break; + case MMC_POWER_UP: + gpio_set_value(GTA01_GPIO_SDMMC_ON, 0); + break; + } +} + +static struct s3c24xx_mci_pdata gta01_mmc_cfg = { + .gpio_detect = GTA01_GPIO_nSD_DETECT, + .set_power = >a01_mmc_set_power, + .ocr_avail = MMC_VDD_32_33, +}; + +/* UDC */ + +static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd) +{ + printk("udc command: %d\n", cmd); + switch (cmd) { + case S3C2410_UDC_P_ENABLE: + gpio_set_value(GTA01_GPIO_USB_PULLUP, 1); + break; + case S3C2410_UDC_P_DISABLE: + gpio_set_value(GTA01_GPIO_USB_PULLUP, 0); + break; + default: + break; + } +} + +/* use a work queue, since I2C API inherently schedules + * and we get called in hardirq context from UDC driver */ + +struct vbus_draw { + struct work_struct work; + int ma; +}; +static struct vbus_draw gta01_udc_vbus_drawer; + +static void __gta01_udc_vbus_draw(struct work_struct *work) +{ + /* + * This is a fix to work around boot-time ordering problems if the + * s3c2410_udc is initialized before the pcf50606 driver has defined + * pcf50606_global + */ + if (!gta01_pcf) + return; +#if 0 + if (gta01_udc_vbus_drawer.ma >= 500) { + /* enable fast charge */ + printk(KERN_DEBUG "udc: enabling fast charge\n"); + pcf50606_charge_fast(gta01_pcf, 1); + } else { + /* disable fast charge */ + printk(KERN_DEBUG "udc: disabling fast charge\n"); + pcf50606_charge_fast(gta01_pcf, 0); + } +#endif +} + +static void gta01_udc_vbus_draw(unsigned int ma) +{ + gta01_udc_vbus_drawer.ma = ma; + schedule_work(>a01_udc_vbus_drawer.work); +} + +static struct s3c2410_udc_mach_info gta01_udc_cfg = { + .vbus_draw = gta01_udc_vbus_draw, + .udc_command = gta01_udc_command, +}; + +/* Touchscreen configuration. */ + + +#ifdef CONFIG_TOUCHSCREEN_FILTER +const static struct ts_filter_group_configuration gta01_ts_group = { + .length = 12, + .close_enough = 10, + .threshold = 6, /* At least half of the points in a group. */ + .attempts = 10, +}; + +const static struct ts_filter_median_configuration gta01_ts_median = { + .extent = 20, + .decimation_below = 3, + .decimation_threshold = 8 * 3, + .decimation_above = 4, +}; + +const static struct ts_filter_mean_configuration gta01_ts_mean = { + .length = 4, +}; + +const static struct ts_filter_linear_configuration gta01_ts_linear = { + .constants = {1, 0, 0, 0, 1, 0, 1}, /* Don't modify coords. */ + .coord0 = 0, + .coord1 = 1, +}; +#endif + +const static struct ts_filter_chain_configuration gta01_filter_configuration[] = +{ +#ifdef CONFIG_TOUCHSCREEN_FILTER + {&ts_filter_group_api, >a01_ts_group.config}, + {&ts_filter_median_api, >a01_ts_median.config}, + {&ts_filter_mean_api, >a01_ts_mean.config}, + {&ts_filter_linear_api, >a01_ts_linear.config}, +#endif + {NULL, NULL}, +}; + +const static struct s3c2410_ts_mach_info gta01_ts_cfg = { + .delay = 10000, + .presc = 0xff, /* slow as we can go */ + .filter_config = gta01_filter_configuration, +}; + +/* SPI / Display */ + +const struct jbt6k74_platform_data gta01_jbt6k74_pdata = { + .gpio_reset = GTA01_GPIO_LCD_RESET, +}; + +static struct spi_board_info gta01_spi_board_info[] = { + { + .modalias = "jbt6k74", + .platform_data = >a01_jbt6k74_pdata, + .controller_data = (void*)S3C2410_GPG(3), + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 1, + }, +}; + +static struct spi_gpio_platform_data spigpio_platform_data = { + .sck = S3C2410_GPG(7), + .mosi = S3C2410_GPG(6), + .miso = S3C2410_GPG(5), + .num_chipselect = 1, +}; + +static struct platform_device gta01_lcm_spigpio_device = { + .name = "spi_gpio", + .id = 1, + .dev = { + .platform_data = &spigpio_platform_data, + }, +}; + +/* Backlight */ + +static struct platform_pwm_backlight_data gta01_bl_pdata = { + .max_brightness = 0xff, + .dft_brightness = 0xff, + .pwm_period_ns = 5000000, /* TODO: Tweak this */ + .pwm_id = 0, +}; + +static struct platform_device gta01_bl_device = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .platform_data = >a01_bl_pdata, + .parent = &s3c_device_timer[0].dev, + }, +}; + +/* Vibrator */ +static struct led_pwm gta01_vibrator = { + .name = "gta01::vibrator", + .max_brightness = 0xff, + .pwm_period_ns = 500000, /* TODO: Tweak this */ + .pwm_id = 3, +}; + +static struct led_pwm_platform_data gta01_vibrator_pdata = { + .num_leds = 1, + .leds = >a01_vibrator, +}; + +static struct platform_device gta01_vibrator_device_bv4 = { + .name = "leds_pwm", + .id = -1, + .dev = { + .platform_data = >a01_vibrator_pdata, + .parent = &s3c_device_timer[3].dev, + } +}; + +static struct gpio_led gta01_vibrator_bv2 = { + .name = "gta01::vibrator", + .gpio = GTA01Bv2_GPIO_VIBRATOR_ON, + .default_state = LEDS_GPIO_DEFSTATE_OFF, +}; + +static struct gpio_led_platform_data gta01_vibrator_pdata_bv2 = { + .num_leds = 1, + .leds = >a01_vibrator_bv2, +}; + +static struct platform_device gta01_vibrator_device_bv2 = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = >a01_vibrator_pdata_bv2, + } +}; + +static struct platform_device *gta01_vibrator_device = >a01_vibrator_device_bv4; +/* Buttons */ + +static struct gpio_keys_button gta01_buttons[] = { + { + .gpio = GTA01_GPIO_AUX_KEY, + .code = KEY_PHONE, + .desc = "Aux", + .type = EV_KEY, + .debounce_interval = 100, + }, + { + .gpio = GTA01_GPIO_HOLD_KEY, + .code = KEY_PAUSE, + .desc = "Hold", + .type = EV_KEY, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data gta01_buttons_pdata = { + .buttons = gta01_buttons, + .nbuttons = ARRAY_SIZE(gta01_buttons), +}; + +static struct platform_device gta01_buttons_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = >a01_buttons_pdata, + }, +}; + +/* USB */ + +static struct s3c2410_hcd_info gta01_usb_info = { + .port[0] = { + .flags = S3C_HCDFLG_USED, + }, + .port[1] = { + .flags = 0, + }, +}; + +static struct platform_device *gta01_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_sdi, + &s3c_device_usbgadget, + &s3c_device_nand, + &s3c_device_adc, + &s3c_device_ts, + &s3c_device_timer[0], + &s3c_device_timer[3], + >a01_bl_device, + >a01_buttons_device, + >a01_pm_gsm_dev, +}; + +static struct platform_device *gta01_pmu_child_devices[] __devinitdata = { + >a01_lcm_spigpio_device, +}; + +static void __devinit gta01_pmu_attach_child_devices(struct pcf50606 *pcf) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(gta01_pmu_child_devices); ++i) + gta01_pmu_child_devices[i]->dev.parent = pcf->dev; + + platform_add_devices(gta01_pmu_child_devices, + ARRAY_SIZE(gta01_pmu_child_devices)); +} +static void __init gta01_map_io(void) +{ + s3c24xx_init_io(gta01_iodesc, ARRAY_SIZE(gta01_iodesc)); + s3c24xx_init_clocks(12*1000*1000); + s3c24xx_init_uarts(gta01_uartcfgs, ARRAY_SIZE(gta01_uartcfgs)); +} + +static irqreturn_t gta01_modem_irq(int irq, void *param) +{ + printk(KERN_DEBUG "GSM wakeup interrupt (IRQ %d)\n", irq); +/* gta_gsm_interrupts++;*/ + return IRQ_HANDLED; +} + +static struct i2c_board_info gta01_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("pcf50606", 0x08), + .irq = GTA01Bv4_IRQ_PCF50606, + .platform_data = >a01_pcf_pdata, + }, + { + I2C_BOARD_INFO("lm4857", 0x7c), + }, + { + I2C_BOARD_INFO("wm8753", 0x1a), + }, +}; + +static int __init gta01_init_gpio(void) +{ + int ret; + + ret = gpio_request(GTA01_GPIO_USB_PULLUP, "udc pullup"); + + ret = gpio_direction_output(GTA01_GPIO_USB_PULLUP, 0); + + ret = gpio_request(GTA01_GPIO_SDMMC_ON, "SD/MMC power"); + + ret = gpio_direction_output(GTA01_GPIO_SDMMC_ON, 1); + + s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPB0_TOUT0); + if (S3C_SYSTEM_REV_ATAG == GTA01Bv4_SYSTEM_REV) + s3c2410_gpio_cfgpin(GTA01Bv4_GPIO_VIBRATOR_ON, S3C2410_GPB3_TOUT3); + + return ret; +} + +static void __init gta01_machine_init(void) +{ + int rc; + + gta01_init_gpio(); + + if (S3C_SYSTEM_REV_ATAG != GTA01Bv4_SYSTEM_REV) { + gta01_vibrator_device = >a01_vibrator_device_bv2; + gta01_i2c_devs[0].irq = GTA01Bv2_IRQ_PCF50606; + } + + s3c_device_usb.dev.platform_data = >a01_usb_info; + s3c_device_nand.dev.platform_data = >a01_nand_info; + s3c_device_sdi.dev.platform_data = >a01_mmc_cfg; + + s3c24xx_fb_set_platdata(>a01_lcd_cfg); + + INIT_WORK(>a01_udc_vbus_drawer.work, __gta01_udc_vbus_draw); + s3c24xx_udc_set_platdata(>a01_udc_cfg); + s3c_i2c0_set_platdata(NULL); + + set_s3c2410ts_info(>a01_ts_cfg); + +#if 0 + switch (S3C_SYSTEM_REV_ATAG) { + case GTA01v3_SYSTEM_REV: + case GTA01v4_SYSTEM_REV: + /* just use the default (GTA01_IRQ_PCF50606) */ + break; + case GTA01Bv2_SYSTEM_REV: + case GTA01Bv3_SYSTEM_REV: + /* just use the default (GTA01_IRQ_PCF50606) */ + gta01_led_resources[0].start = + gta01_led_resources[0].end = GTA01Bv2_GPIO_VIBRATOR_ON; + break; + case GTA01Bv4_SYSTEM_REV: + gta01_i2c_devs[0].irq = GTA01Bv4_IRQ_PCF50606; + gta01_led_resources[0].start = + gta01_led_resources[0].end = GTA01Bv4_GPIO_VIBRATOR_ON; + break; + } +#endif + mangle_pmu_pdata_by_system_rev(); + + i2c_register_board_info(0, gta01_i2c_devs, ARRAY_SIZE(gta01_i2c_devs)); + spi_register_board_info(gta01_spi_board_info, + ARRAY_SIZE(gta01_spi_board_info)); + + platform_add_devices(gta01_devices, ARRAY_SIZE(gta01_devices)); +/* platform_add_devices(gta01_vibrator_device, 1);*/ + + s3c_pm_init(); + + set_irq_type(GTA01_IRQ_MODEM, IRQ_TYPE_EDGE_RISING); + rc = request_irq(GTA01_IRQ_MODEM, gta01_modem_irq, IRQF_DISABLED, + "modem", NULL); + enable_irq_wake(GTA01_IRQ_MODEM); + + printk(KERN_DEBUG "Enabled GSM wakeup IRQ %d (rc=%d)\n", + GTA01_IRQ_MODEM, rc); + + pm_power_off = >a01_power_off; +} + +MACHINE_START(NEO1973_GTA01, "GTA01") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = gta01_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = gta01_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 6a5bc3021bd..ec71a696578 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -48,8 +48,6 @@ #include <plat/mci.h> #include <plat/udc.h> -#include <plat/regs-serial.h> - #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> @@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { .nr_chips = 1, .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), .partitions = mini2440_default_nand_part, + .flash_bbt = 1, /* we use u-boot to create a BBT */ }, }; diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index e23b581aa0e..0fb385bd9cd 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = { */ .name = "neo1973-nand", .nr_chips = 1, - .use_bbt = 1, - .force_soft_ecc = 1, + .flash_bbt = 1, }, }; diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5cd04d6751b..111f7ea32b3 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/timer.h> #include <linux/io.h> +#include <linux/seq_file.h> #include <asm/clkdev.h> #include <mach/hardware.h> @@ -702,6 +703,7 @@ static struct clk amba_clk = { .rate = 52000000, /* this varies! */ .hw_ctrld = true, .reset = false, + .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), }; /* @@ -720,6 +722,7 @@ static struct clk cpu_clk = { .set_rate = clk_set_rate_cpuclk, .get_rate = clk_get_rate_cpuclk, .round_rate = clk_round_rate_cpuclk, + .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), }; static struct clk nandif_clk = { @@ -732,6 +735,7 @@ static struct clk nandif_clk = { .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), }; static struct clk semi_clk = { @@ -744,6 +748,7 @@ static struct clk semi_clk = { .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -758,6 +763,7 @@ static struct clk isp_clk = { .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), }; static struct clk cds_clk = { @@ -771,6 +777,7 @@ static struct clk cds_clk = { .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), }; #endif @@ -785,6 +792,7 @@ static struct clk dma_clk = { .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), }; static struct clk aaif_clk = { @@ -798,6 +806,7 @@ static struct clk aaif_clk = { .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), }; static struct clk apex_clk = { @@ -811,6 +820,7 @@ static struct clk apex_clk = { .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), }; static struct clk video_enc_clk = { @@ -825,6 +835,7 @@ static struct clk video_enc_clk = { .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), }; static struct clk xgam_clk = { @@ -839,6 +850,7 @@ static struct clk xgam_clk = { .get_rate = clk_get_rate_xgamclk, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), }; /* This clock is used to activate the video encoder */ @@ -854,6 +866,7 @@ static struct clk ahb_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), }; @@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), }; static struct clk intcon_clk = { @@ -882,6 +896,8 @@ static struct clk intcon_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, /* INTCON can be reset but not clock-gated */ + .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), + }; static struct clk mspro_clk = { @@ -895,6 +911,7 @@ static struct clk mspro_clk = { .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), }; static struct clk emif_clk = { @@ -909,6 +926,7 @@ static struct clk emif_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_emif_clk, + .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), }; @@ -926,6 +944,7 @@ static struct clk fast_clk = { .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), }; static struct clk mmcsd_clk = { @@ -942,6 +961,7 @@ static struct clk mmcsd_clk = { .round_rate = clk_round_rate_mclk, .disable = syscon_clk_disable, .enable = syscon_clk_enable, + .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), }; static struct clk i2s0_clk = { @@ -956,6 +976,7 @@ static struct clk i2s0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), }; static struct clk i2s1_clk = { @@ -970,6 +991,7 @@ static struct clk i2s1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), }; static struct clk i2c0_clk = { @@ -984,6 +1006,7 @@ static struct clk i2c0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), }; static struct clk i2c1_clk = { @@ -998,6 +1021,7 @@ static struct clk i2c1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), }; static struct clk spi_clk = { @@ -1012,6 +1036,7 @@ static struct clk spi_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1026,6 +1051,7 @@ static struct clk uart1_clk = { .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), }; #endif @@ -1044,6 +1070,7 @@ static struct clk slow_clk = { .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), }; /* TODO: implement SYSCON clock? */ @@ -1055,6 +1082,7 @@ static struct clk wdog_clk = { .rate = 32768, .reset = false, /* This is always on, cannot be enabled/disabled or reset */ + .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), }; /* This one is hardwired to PLL13 */ @@ -1069,6 +1097,7 @@ static struct clk uart_clk = { .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock), }; static struct clk keypad_clk = { @@ -1082,6 +1111,7 @@ static struct clk keypad_clk = { .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), }; static struct clk gpio_clk = { @@ -1095,6 +1125,7 @@ static struct clk gpio_clk = { .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), }; static struct clk rtc_clk = { @@ -1106,6 +1137,7 @@ static struct clk rtc_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, /* This clock is always on, cannot be enabled/disabled */ + .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), }; static struct clk bustr_clk = { @@ -1119,6 +1151,7 @@ static struct clk bustr_clk = { .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), }; static struct clk evhist_clk = { @@ -1132,6 +1165,7 @@ static struct clk evhist_clk = { .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), }; static struct clk timer_clk = { @@ -1145,6 +1179,7 @@ static struct clk timer_clk = { .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), }; static struct clk app_timer_clk = { @@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = { .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1172,6 +1208,7 @@ static struct clk ppm_clk = { .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), }; #endif @@ -1187,53 +1224,53 @@ static struct clk ppm_clk = { */ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("nandif", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), #endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("aaif", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("msl", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), /* AHB bridge clocks */ - DEF_LOOKUP("ahb", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), + DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), /* * The .0 and .1 identifiers on these comes from the platform device * .id field and are assigned when the platform devices are registered. */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stddci2c.0", &i2c0_clk), - DEF_LOOKUP("stddci2c.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stu300.0", &i2c0_clk), + DEF_LOOKUP("stu300.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), + DEF_LOOKUP("uart1", &uart1_clk), #endif /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart_clk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("coh901327_wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("coh901461-keypad", &keypad_clk), DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc0", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), + DEF_LOOKUP("rtc-coh901331", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), + DEF_LOOKUP("ppm", &ppm_clk), #endif }; @@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = { .release = single_release, }; -static void init_clk_read_procfs(void) +static int __init init_clk_read_debugfs(void) { /* Expose a simple debugfs interface to view all clocks */ (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, &u300_clocks_operations); -} -#else -static inline void init_clk_read_procfs(void) -{ + NULL, NULL, + &u300_clocks_operations); + return 0; } +/* + * This needs to come in after the core_initcall() for the + * overall clocks, because debugfs is not available until + * the subsystems come up. + */ +module_init(init_clk_read_debugfs); #endif static int __init u300_clock_init(void) @@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void) clk_register(); - init_clk_read_procfs(); - /* * Some of these may be on when we boot the system so make sure they * are turned OFF. diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 89b3ccf35e1..2e9b8ccd8ec 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -455,8 +455,8 @@ void __init u300_init_irq(void) for (i = 0; i < NR_IRQS; i++) set_bit(i, (unsigned long *) &mask[0]); u300_enable_intcon_clock(); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0); + vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); } @@ -510,7 +510,7 @@ static struct db_chip db_chips[] __initdata = { } }; -static void u300_init_check_chip(void) +static void __init u300_init_check_chip(void) { u16 val; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 69214fc8bd1..31093af7d05 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = { static struct i2c_board_info versatile_i2c_board_info[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1), - .type = "ds1338", + I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8277802ec85..3a7279c1ce5 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -120,6 +120,32 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } +static void __init find_node_limits(int node, struct meminfo *mi, + unsigned long *min, unsigned long *max_low, unsigned long *max_high) +{ + int i; + + *min = -1UL; + *max_low = *max_high = 0; + + for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; + unsigned long start, end; + + start = bank_pfn_start(bank); + end = bank_pfn_end(bank); + + if (*min > start) + *min = start; + if (*max_high < end) + *max_high = end; + if (bank->highmem) + continue; + if (*max_low < end) + *max_low = end; + } +} + /* * FIXME: We really want to avoid allocating the bootmap bitmap * over the top of the initrd. Hopefully, this is located towards @@ -210,41 +236,25 @@ static inline void map_memory_bank(struct membank *bank) #endif } -static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) +static void __init bootmem_init_node(int node, struct meminfo *mi, + unsigned long start_pfn, unsigned long end_pfn) { - unsigned long start_pfn, end_pfn, boot_pfn; + unsigned long boot_pfn; unsigned int boot_pages; pg_data_t *pgdat; int i; - start_pfn = -1UL; - end_pfn = 0; - /* - * Calculate the pfn range, and map the memory banks for this node. + * Map the memory banks for this node. */ for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - unsigned long start, end; - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (start_pfn > start) - start_pfn = start; - if (end_pfn < end) - end_pfn = end; - - map_memory_bank(bank); + if (!bank->highmem) + map_memory_bank(bank); } /* - * If there is no memory in this node, ignore it. - */ - if (end_pfn == 0) - return end_pfn; - - /* * Allocate the bootmem bitmap page. */ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); @@ -260,7 +270,8 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); + if (!bank->highmem) + free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); } @@ -269,8 +280,6 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) */ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); - - return end_pfn; } static void __init bootmem_reserve_initrd(int node) @@ -297,33 +306,39 @@ static void __init bootmem_reserve_initrd(int node) static void __init bootmem_free_node(int node, struct meminfo *mi) { unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long start_pfn, end_pfn; - pg_data_t *pgdat = NODE_DATA(node); + unsigned long min, max_low, max_high; int i; - start_pfn = pgdat->bdata->node_min_pfn; - end_pfn = pgdat->bdata->node_low_pfn; + find_node_limits(node, mi, &min, &max_low, &max_high); /* * initialise the zones within this node. */ memset(zone_size, 0, sizeof(zone_size)); - memset(zhole_size, 0, sizeof(zhole_size)); /* * The size of this node has already been determined. If we need * to do anything fancy with the allocation of this memory to the * zones, now is the time to do it. */ - zone_size[0] = end_pfn - start_pfn; + zone_size[0] = max_low - min; +#ifdef CONFIG_HIGHMEM + zone_size[ZONE_HIGHMEM] = max_high - max_low; +#endif /* * For each bank in this node, calculate the size of the holes. * holes = node_size - sum(bank_sizes_in_node) */ - zhole_size[0] = zone_size[0]; - for_each_nodebank(i, mi, node) - zhole_size[0] -= bank_pfn_size(&mi->bank[i]); + memcpy(zhole_size, zone_size, sizeof(zhole_size)); + for_each_nodebank(i, mi, node) { + int idx = 0; +#ifdef CONFIG_HIGHMEM + if (mi->bank[i].highmem) + idx = ZONE_HIGHMEM; +#endif + zhole_size[idx] -= bank_pfn_size(&mi->bank[i]); + } /* * Adjust the sizes according to any special requirements for @@ -331,13 +346,13 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) */ arch_adjust_zones(node, zone_size, zhole_size); - free_area_init_node(node, zone_size, start_pfn, zhole_size); + free_area_init_node(node, zone_size, min, zhole_size); } void __init bootmem_init(void) { struct meminfo *mi = &meminfo; - unsigned long memend_pfn = 0; + unsigned long min, max_low, max_high; int node, initrd_node; /* @@ -345,11 +360,29 @@ void __init bootmem_init(void) */ initrd_node = check_initrd(mi); + max_low = max_high = 0; + /* * Run through each node initialising the bootmem allocator. */ for_each_node(node) { - unsigned long end_pfn = bootmem_init_node(node, mi); + unsigned long node_low, node_high; + + find_node_limits(node, mi, &min, &node_low, &node_high); + + if (node_low > max_low) + max_low = node_low; + if (node_high > max_high) + max_high = node_high; + + /* + * If there is no memory in this node, ignore it. + * (We can't have nodes which have no lowmem) + */ + if (node_low == 0) + continue; + + bootmem_init_node(node, mi, min, node_low); /* * Reserve any special node zero regions. @@ -362,12 +395,6 @@ void __init bootmem_init(void) */ if (node == initrd_node) bootmem_reserve_initrd(node); - - /* - * Remember the highest memory PFN. - */ - if (end_pfn > memend_pfn) - memend_pfn = end_pfn; } /* @@ -383,7 +410,7 @@ void __init bootmem_init(void) for_each_node(node) bootmem_free_node(node, mi); - high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1; + high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any @@ -393,7 +420,8 @@ void __init bootmem_init(void) * Note: max_low_pfn and max_pfn reflect the number of _pages_ in * the system, not the maximum PFN. */ - max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; + max_low_pfn = max_low - PHYS_PFN_OFFSET; + max_pfn = max_high - PHYS_PFN_OFFSET; } static inline int free_area(unsigned long pfn, unsigned long end, char *s) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4722582b17b..4426ee67cec 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -687,13 +687,19 @@ __early_param("vmalloc=", early_vmalloc); static void __init sanity_check_meminfo(void) { - int i, j; + int i, j, highmem = 0; for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM + if (__va(bank->start) > VMALLOC_MIN || + __va(bank->start) < (void *)PAGE_OFFSET) + highmem = 1; + + bank->highmem = highmem; + /* * Split those memory banks which are partially overlapping * the vmalloc area greatly simplifying things later. @@ -714,6 +720,7 @@ static void __init sanity_check_meminfo(void) i++; bank[1].size -= VMALLOC_MIN - __va(bank->start); bank[1].start = __pa(VMALLOC_MIN - 1) + 1; + bank[1].highmem = highmem = 1; j++; } bank->size = VMALLOC_MIN - __va(bank->start); diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 195e48edd8c..ac5c80062b7 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); +EXPORT_SYMBOL(__cpuc_flush_dcache_page); EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ #else EXPORT_SYMBOL(cpu_cache); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 27f8d1b2bc6..2eb182f7387 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -602,6 +602,8 @@ enum iomux_pins { #define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) #define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 843e8af6406..1868c0d8f9b 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy, /* Ensure desired rate is within allowed range. Some govenors * (ondemand) will just pass target_freq=0 to get the minimum. */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; + if (target_freq < policy->min) + target_freq = policy->min; + if (target_freq > policy->max) + target_freq = policy->max; freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index def14ec265b..e3ac94f0900 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -946,7 +946,9 @@ void omap_start_dma(int lch) cur_lch = next_lch; } while (next_lch != -1); - } else if (cpu_class_is_omap2()) { + } else if (cpu_is_omap242x() || + (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) { + /* Errata: Need to write lch even if not using chaining */ dma_write(lch, CLNK_CTRL(lch)); } @@ -2457,6 +2459,19 @@ static int __init omap_init_dma(void) setup_irq(irq, &omap24xx_dma_irq); } + /* Enable smartidle idlemodes and autoidle */ + if (cpu_is_omap34xx()) { + u32 v = dma_read(OCP_SYSCONFIG); + v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK | + DMA_SYSCONFIG_SIDLEMODE_MASK | + DMA_SYSCONFIG_AUTOIDLE); + v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_AUTOIDLE); + dma_write(v , OCP_SYSCONFIG); + } + + /* FIXME: Update LCD DMA to work on 24xx */ if (cpu_class_is_omap1()) { r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7fd89ba8d3b..9298bc0ab17 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) __raw_writel(l, reg); } -static int __omap_get_gpio_datain(int gpio) +static int _get_gpio_datain(struct gpio_bank *bank, int gpio) { - struct gpio_bank *bank; void __iomem *reg; if (check_gpio(gpio) < 0) return -EINVAL; - bank = get_gpio_bank(gpio); reg = bank->base; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 @@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio) & (1 << get_gpio_index(gpio))) != 0; } +static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAOUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP730 + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_OUTPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAOUT; + break; +#endif + default: + return -EINVAL; + } + + return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; +} + #define MOD_REG_BIT(reg, bit_mask, set) \ do { \ int l = __raw_readl(base + reg); \ @@ -1189,6 +1234,7 @@ static void gpio_mask_irq(unsigned int irq) struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 0); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } static void gpio_unmask_irq(unsigned int irq) @@ -1196,6 +1242,11 @@ static void gpio_unmask_irq(unsigned int irq) unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); unsigned int irq_mask = 1 << get_gpio_index(gpio); + struct irq_desc *desc = irq_to_desc(irq); + u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; + + if (trigger) + _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); /* For level-triggered GPIOs, the clearing must be done after * the HW source is cleared, thus after the handler has run */ @@ -1350,9 +1401,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset) return 0; } +static int gpio_is_input(struct gpio_bank *bank, int mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL; + break; + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; + } + return __raw_readl(reg) & mask; +} + static int gpio_get(struct gpio_chip *chip, unsigned offset) { - return __omap_get_gpio_datain(chip->base + offset); + struct gpio_bank *bank; + void __iomem *reg; + int gpio; + u32 mask; + + gpio = chip->base + offset; + bank = get_gpio_bank(gpio); + reg = bank->base; + mask = 1 << get_gpio_index(gpio); + + if (gpio_is_input(bank, mask)) + return _get_gpio_datain(bank, gpio); + else + return _get_gpio_dataout(bank, gpio); } static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) @@ -1585,6 +1676,7 @@ static int __init _omap_gpio_init(void) __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG); + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN); /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); @@ -1885,34 +1977,6 @@ arch_initcall(omap_gpio_sysinit); #include <linux/debugfs.h> #include <linux/seq_file.h> -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - } - return __raw_readl(reg) & mask; -} - - static int dbg_gpio_show(struct seq_file *s, void *unused) { unsigned i, j, gpio; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index f9f65e1ba3f..4b8b0d65cbf 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -20,6 +20,8 @@ struct clockdomain; struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, u8 *); + void (*find_companion)(struct clk *, void __iomem **, u8 *); }; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index fc60c4ebcc2..11e73d9e892 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -30,6 +30,17 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + struct omap_chip_id { u8 oc; u8 type; @@ -367,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ cpu_is_omap44xx()) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) - /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 #define OMAP2420_REV_ES1_0 0x24200024 @@ -424,17 +432,4 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); -int omap_type(void); - -/* - * Macro to detect device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - void omap2_check_revision(void); - -#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h index 8c1eae88737..7b939cc0196 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -389,6 +389,21 @@ #define DMA_THREAD_FIFO_25 (0x02 << 14) #define DMA_THREAD_FIFO_50 (0x03 << 14) +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + /* Chaining modes*/ #ifndef CONFIG_ARCH_OMAP1 #define OMAP_DMA_STATIC_CHAIN 0x1 diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 3b281472056..21fb0efdda8 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -201,7 +201,7 @@ #define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) #ifdef __ASSEMBLER__ -#define IOMEM(x) x +#define IOMEM(x) (x) #else #define IOMEM(x) ((void __force __iomem *)(x)) @@ -228,7 +228,8 @@ extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(struct omap_sdrc_params *sp); +extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); #define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) #define __arch_iounmap(v) omap_iounmap(v) diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 85a62170576..80281c458ba 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -853,6 +853,10 @@ enum omap34xx_index { AE5_34XX_GPIO143, H19_34XX_GPIO164_OUT, J25_34XX_GPIO170, + + /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ + H16_34XX_SDRC_CKE0, + H17_34XX_SDRC_CKE1, }; struct omap_mux_cfg { diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h index 24ac3c71591..cda2a70397b 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/mach/prcm.h @@ -25,6 +25,7 @@ u32 omap_prcm_get_reset_sources(void); void omap_prcm_arch_reset(char mode); +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); #endif diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index adc73522491..0be18e4ff18 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -30,6 +30,10 @@ #define SDRC_ACTIM_CTRL_A_0 0x09c #define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MR_1 0x0B4 +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 /* * These values represent the number of memory clock cycles between @@ -102,8 +106,11 @@ struct omap_sdrc_params { u32 mr; }; -void __init omap2_sdrc_init(struct omap_sdrc_params *sp); -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r); +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); #ifdef CONFIG_ARCH_OMAP2 diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 13abd02d152..def0529c75e 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); extern void omap_uart_prepare_idle(int num); extern void omap_uart_resume_idle(int num); +extern void omap_uart_enable_irqs(int enable); #endif #endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index 4d53cc59d7a..8974e3fc269 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,11 +21,12 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -59,12 +60,12 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4cf449fa2cb..4a030139901 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); - + iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 65006df3f1b..5eae7876979 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -44,9 +44,9 @@ #define OMAP2_SRAM_VA 0xe3000000 #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 -#define OMAP3_SRAM_VA 0xd7000000 +#define OMAP3_SRAM_VA 0xe3000000 #define OMAP3_SRAM_PUB_PA 0x40208000 -#define OMAP3_SRAM_PUB_VA 0xd7008000 +#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ #define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ @@ -133,7 +133,12 @@ void __init omap_detect_sram(void) if (cpu_is_omap34xx()) { omap_sram_base = OMAP3_SRAM_PUB_VA; omap_sram_start = OMAP3_SRAM_PUB_PA; - omap_sram_size = 0x8000; /* 32K */ + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + } else { + omap_sram_size = 0x8000; /* 32K */ + } } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; @@ -368,20 +373,26 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, - u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc); -u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc) +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) { BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, - sdrc_actim_ctrla, - sdrc_actim_ctrlb, m2, - unlock_dll, f, sdrc_mr, inc); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 9646a94ed3d..07c430fdc9e 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -11,6 +11,8 @@ #ifndef __PLAT_GPIO_H #define __PLAT_GPIO_H +#include <linux/init.h> + /* * GENERIC_GPIO primitives. */ diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index abc79d44aca..98548c6903a 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -16,7 +16,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> -#include <linux/bootmem.h> +#include <linux/slab.h> #include <mach/gpio.h> @@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end) int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; struct pxa_gpio_chip *chips; - /* this is early, we have to use bootmem allocator, and we really - * want this to be allocated dynamically for different 'gpio_end' - */ - chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip)); + chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL); if (chips == NULL) { pr_err("%s: failed to allocate GPIO chips\n", __func__); return -ENOMEM; } - memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); - for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 935c7558469..bae4b955edf 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -166,6 +166,11 @@ config S3C_DMA help Internal configuration for S3C DMA core +config S3C_PWM + bool + help + PWM timer code for the S3C2410, and similar processors + # device definitions to compile in config S3C_DEV_HSMMC diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 74bb7cb5da4..4d8e4a35d34 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -34,7 +34,8 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o +obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-$(CONFIG_S3C_PWM) += pwm.o diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index b5b9c4d46e9..41773808040 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; @@ -50,6 +51,8 @@ extern struct platform_device s3c_device_nand; extern struct platform_device s3c_device_usbgadget; extern struct platform_device s3c_device_usb_hsotg; +extern struct platform_device s3c_device_ts; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index 18f958801e6..723ab032059 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -47,6 +47,7 @@ struct s3c2410_platform_nand { int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ unsigned int ignore_unset_ecc:1; + unsigned int software_ecc:1; /* force software ecc at runtime */ int nr_sets; struct s3c2410_nand_set *sets; diff --git a/arch/arm/plat-s3c/include/plat/pwm.h b/arch/arm/plat-s3c/include/plat/pwm.h new file mode 100644 index 00000000000..6a41b0ad840 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/pwm.h @@ -0,0 +1,45 @@ +#ifndef __S3C2410_PWM_H +#define __S3C2410_PWM_H + +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +#include <mach/io.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <plat/regs-timer.h> + +enum pwm_timer { + PWM0, + PWM1, + PWM2, + PWM3, + PWM4 +}; + +struct s3c2410_pwm { + enum pwm_timer timerid; + struct clk *pclk; + unsigned long pclk_rate; + unsigned long prescaler; + unsigned long divider; + unsigned long counter; + unsigned long comparer; +}; + +struct s3c24xx_pwm_platform_data{ + /* callback to attach platform children (to enforce suspend / resume + * ordering */ + void (*attach_child_devices)(struct device *parent_device); +}; + +int s3c2410_pwm_init(struct s3c2410_pwm *s3c2410_pwm); +int s3c2410_pwm_enable(struct s3c2410_pwm *s3c2410_pwm); +int s3c2410_pwm_disable(struct s3c2410_pwm *s3c2410_pwm); +int s3c2410_pwm_start(struct s3c2410_pwm *s3c2410_pwm); +int s3c2410_pwm_stop(struct s3c2410_pwm *s3c2410_pwm); +int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *s3c2410_pwm); +int s3c2410_pwm_dumpregs(void); + +#endif /* __S3C2410_PWM_H */ diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c new file mode 100644 index 00000000000..250bd2bc9b8 --- /dev/null +++ b/arch/arm/plat-s3c/pwm.c @@ -0,0 +1,288 @@ +/* + * arch/arm/plat-s3c/pwm.c + * + * Copyright (c) by Javi Roman <javiroman@kernel-labs.org> + * for the Openmoko Project. + * + * S3C2410A SoC PWM support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <mach/hardware.h> +#include <plat/regs-timer.h> +#include <plat/pwm.h> +#include <asm/io.h> + +#ifdef CONFIG_PM + static unsigned long standby_reg_tcon; + static unsigned long standby_reg_tcfg0; + static unsigned long standby_reg_tcfg1; +#endif + +int s3c2410_pwm_disable(struct s3c2410_pwm *pwm) +{ + unsigned long tcon; + + /* stop timer */ + tcon = __raw_readl(S3C2410_TCON); + tcon &= 0xffffff00; + __raw_writel(tcon, S3C2410_TCON); + + clk_disable(pwm->pclk); + clk_put(pwm->pclk); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c2410_pwm_disable); + +int s3c2410_pwm_init(struct s3c2410_pwm *pwm) +{ + pwm->pclk = clk_get(NULL, "timers"); + if (IS_ERR(pwm->pclk)) + return PTR_ERR(pwm->pclk); + + clk_enable(pwm->pclk); + pwm->pclk_rate = clk_get_rate(pwm->pclk); + return 0; +} +EXPORT_SYMBOL_GPL(s3c2410_pwm_init); + +int s3c2410_pwm_enable(struct s3c2410_pwm *pwm) +{ + unsigned long tcfg0, tcfg1, tcnt, tcmp; + + /* control registers bits */ + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg0 = __raw_readl(S3C2410_TCFG0); + + /* divider & scaler slection */ + switch (pwm->timerid) { + case PWM0: + tcfg1 &= ~S3C2410_TCFG1_MUX0_MASK; + tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; + break; + case PWM1: + tcfg1 &= ~S3C2410_TCFG1_MUX1_MASK; + tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; + break; + case PWM2: + tcfg1 &= ~S3C2410_TCFG1_MUX2_MASK; + tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; + break; + case PWM3: + tcfg1 &= ~S3C2410_TCFG1_MUX3_MASK; + tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; + break; + case PWM4: + /* timer four is not capable of doing PWM */ + break; + default: + clk_disable(pwm->pclk); + clk_put(pwm->pclk); + return -1; + } + + /* divider & scaler values */ + tcfg1 |= pwm->divider; + __raw_writel(tcfg1, S3C2410_TCFG1); + + switch (pwm->timerid) { + case PWM0: + case PWM1: + tcfg0 |= pwm->prescaler; + __raw_writel(tcfg0, S3C2410_TCFG0); + break; + default: + if ((tcfg0 | pwm->prescaler) != tcfg0) { + printk(KERN_WARNING "not changing prescaler of PWM %u," + " since it's shared with timer4 (clock tick)\n", + pwm->timerid); + } + break; + } + + /* timer count and compare buffer initial values */ + tcnt = pwm->counter; + tcmp = pwm->comparer; + + __raw_writel(tcnt, S3C2410_TCNTB(pwm->timerid)); + __raw_writel(tcmp, S3C2410_TCMPB(pwm->timerid)); + + /* ensure timer is stopped */ + s3c2410_pwm_stop(pwm); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c2410_pwm_enable); + +int s3c2410_pwm_start(struct s3c2410_pwm *pwm) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (pwm->timerid) { + case PWM0: + tcon |= S3C2410_TCON_T0START; + tcon &= ~S3C2410_TCON_T0MANUALUPD; + break; + case PWM1: + tcon |= S3C2410_TCON_T1START; + tcon &= ~S3C2410_TCON_T1MANUALUPD; + break; + case PWM2: + tcon |= S3C2410_TCON_T2START; + tcon &= ~S3C2410_TCON_T2MANUALUPD; + break; + case PWM3: + tcon |= S3C2410_TCON_T3START; + tcon &= ~S3C2410_TCON_T3MANUALUPD; + break; + case PWM4: + /* timer four is not capable of doing PWM */ + default: + return -ENODEV; + } + + __raw_writel(tcon, S3C2410_TCON); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c2410_pwm_start); + +int s3c2410_pwm_stop(struct s3c2410_pwm *pwm) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (pwm->timerid) { + case PWM0: + tcon &= ~0x00000000; + tcon |= S3C2410_TCON_T0RELOAD; + tcon |= S3C2410_TCON_T0MANUALUPD; + break; + case PWM1: + tcon &= ~0x00000080; + tcon |= S3C2410_TCON_T1RELOAD; + tcon |= S3C2410_TCON_T1MANUALUPD; + break; + case PWM2: + tcon &= ~0x00000800; + tcon |= S3C2410_TCON_T2RELOAD; + tcon |= S3C2410_TCON_T2MANUALUPD; + break; + case PWM3: + tcon &= ~0x00008000; + tcon |= S3C2410_TCON_T3RELOAD; + tcon |= S3C2410_TCON_T3MANUALUPD; + break; + case PWM4: + /* timer four is not capable of doing PWM */ + default: + return -ENODEV; + } + + __raw_writel(tcon, S3C2410_TCON); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c2410_pwm_stop); + +int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *pwm) +{ + __raw_writel(reg_value, S3C2410_TCMPB(pwm->timerid)); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c2410_pwm_duty_cycle); + +int s3c2410_pwm_dumpregs(void) +{ + printk(KERN_INFO "TCON: %08lx, TCFG0: %08lx, TCFG1: %08lx\n", + (unsigned long) __raw_readl(S3C2410_TCON), + (unsigned long) __raw_readl(S3C2410_TCFG0), + (unsigned long) __raw_readl(S3C2410_TCFG1)); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c2410_pwm_dumpregs); + +static int __init s3c24xx_pwm_probe(struct platform_device *pdev) +{ + struct s3c24xx_pwm_platform_data *pdata = pdev->dev.platform_data; + + dev_info(&pdev->dev, "s3c24xx_pwm is registered \n"); + + /* if platform was interested, give him a chance to register + * platform devices that switch power with us as the parent + * at registration time -- ensures suspend / resume ordering + */ + if (pdata) + if (pdata->attach_child_devices) + (pdata->attach_child_devices)(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c24xx_pwm_suspend(struct platform_device *pdev, pm_message_t state) +{ + /* PWM config should be kept in suspending */ + standby_reg_tcon = __raw_readl(S3C2410_TCON); + standby_reg_tcfg0 = __raw_readl(S3C2410_TCFG0); + standby_reg_tcfg1 = __raw_readl(S3C2410_TCFG1); + + return 0; +} + +static int s3c24xx_pwm_resume(struct platform_device *pdev) +{ + __raw_writel(standby_reg_tcon, S3C2410_TCON); + __raw_writel(standby_reg_tcfg0, S3C2410_TCFG0); + __raw_writel(standby_reg_tcfg1, S3C2410_TCFG1); + + return 0; +} +#else +#define s3c24xx_pwm_suspend NULL +#define s3c24xx_pwm_resume NULL +#endif + +static struct platform_driver s3c24xx_pwm_driver = { + .driver = { + .name = "s3c24xx_pwm", + .owner = THIS_MODULE, + }, + .probe = s3c24xx_pwm_probe, + .suspend = s3c24xx_pwm_suspend, + .resume = s3c24xx_pwm_resume, +}; + +static int __init s3c24xx_pwm_init(void) +{ + return platform_driver_register(&s3c24xx_pwm_driver); +} + +static void __exit s3c24xx_pwm_exit(void) +{ +} + +MODULE_AUTHOR("Javi Roman <javiroman@kernel-labs.org>"); +MODULE_LICENSE("GPL"); + +module_init(s3c24xx_pwm_init); +module_exit(s3c24xx_pwm_exit); diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 636cb12711d..579a165c282 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o -obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_S3C24XX_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index ee1baf11ad9..9cff2320e11 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -43,6 +43,7 @@ struct s3c_adc_client { unsigned int nr_samples; unsigned char is_ts; unsigned char channel; + unsigned int selected; void (*select_cb)(unsigned selected); void (*convert_cb)(unsigned val1, unsigned val2, @@ -58,20 +59,31 @@ struct adc_device { void __iomem *regs; unsigned int prescale; + unsigned int delay; int irq; }; static struct adc_device *adc_dev; +static struct work_struct resume_work; + static LIST_HEAD(adc_pending); #define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg) +#define AUTOPST (S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | \ + S3C2410_ADCTSC_XP_SEN | S3C2410_ADCTSC_AUTO_PST | \ + S3C2410_ADCTSC_XY_PST(0)) + static inline void s3c_adc_convert(struct adc_device *adc) { unsigned con = readl(adc->regs + S3C2410_ADCCON); + if (adc->cur->is_ts) + writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, + adc->regs + S3C2410_ADCTSC); + con |= S3C2410_ADCCON_ENABLE_START; writel(con, adc->regs + S3C2410_ADCCON); } @@ -81,7 +93,10 @@ static inline void s3c_adc_select(struct adc_device *adc, { unsigned con = readl(adc->regs + S3C2410_ADCCON); - client->select_cb(1); + if (!client->selected) { + client->selected = 1; + client->select_cb(1); + } con &= ~S3C2410_ADCCON_MUXMASK; con &= ~S3C2410_ADCCON_STDBM; @@ -105,12 +120,9 @@ static void s3c_adc_try(struct adc_device *adc) { struct s3c_adc_client *next = adc->ts_pend; - if (!next && !list_empty(&adc_pending)) { + if (!next && !list_empty(&adc_pending)) next = list_first_entry(&adc_pending, struct s3c_adc_client, pend); - list_del(&next->pend); - } else - adc->ts_pend = NULL; if (next) { adc_dbg(adc, "new client is %p\n", next); @@ -234,14 +246,20 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) if (client->nr_samples > 0) { /* fire another conversion for this */ - + client->selected = 1; client->select_cb(1); s3c_adc_convert(adc); } else { local_irq_save(flags); - (client->select_cb)(0); + client->selected = 0; + if (!adc->cur->is_ts) + list_del(&adc->cur->pend); + else + adc->ts_pend = NULL; adc->cur = NULL; + (client->select_cb)(0); + s3c_adc_try(adc); local_irq_restore(flags); } @@ -264,6 +282,7 @@ static int s3c_adc_probe(struct platform_device *pdev) adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); + adc->delay = 0x2710; adc->irq = platform_get_irq(pdev, 1); if (adc->irq <= 0) { @@ -303,6 +322,7 @@ static int s3c_adc_probe(struct platform_device *pdev) writel(adc->prescale | S3C2410_ADCCON_PRSCEN, adc->regs + S3C2410_ADCCON); + writel(adc->delay, adc->regs + S3C2410_ADCDLY); dev_info(dev, "attached adc driver\n"); @@ -346,18 +366,42 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) writel(con, adc->regs + S3C2410_ADCCON); clk_disable(adc->clk); + disable_irq(IRQ_ADC); + if (!list_empty(&adc_pending) || adc->ts_pend) + dev_info(&pdev->dev, "We still have adc clients pending\n"); return 0; } +/* It seems this is not needed. This is under upstream review now. */ +static void adc_resume_work(struct work_struct *work) +{ + if (!adc_dev) /* Have no ADC here */ + return; + + if (!list_empty(&adc_pending) || adc_dev->ts_pend) + /* We still have adc clients pending */ + s3c_adc_try(adc_dev); +} + static int s3c_adc_resume(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); + enable_irq(IRQ_ADC); clk_enable(adc->clk); writel(adc->prescale | S3C2410_ADCCON_PRSCEN, adc->regs + S3C2410_ADCCON); + writel(adc->delay, adc->regs + S3C2410_ADCDLY); + + /* Schedule task if there are clients pending. */ + if (!list_empty(&adc_pending) || adc_dev->ts_pend) { + INIT_WORK(&resume_work, adc_resume_work); + if (!schedule_work(&resume_work)) + dev_err(&pdev->dev, + "Failed to schedule adc_resume work!\n"); + } return 0; } diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index 5b75a797b5a..0afb217a775 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -129,7 +129,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) /* calculate the MISCCR setting for the clock */ - if (parent == &clk_xtal) + if (parent == &clk_mpll) source = S3C2410_MISCCR_CLK0_MPLL; else if (parent == &clk_upll) source = S3C2410_MISCCR_CLK0_UPLL; diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 1932b7e0da1..ed4c19fa196 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -61,6 +61,7 @@ static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; +static const char name_s3c2442b[] = "S3C2442B"; static const char name_s3c2443[] = "S3C2443"; static const char name_s3c2410a[] = "S3C2410A"; static const char name_s3c2440a[] = "S3C2440A"; @@ -112,6 +113,15 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s3c2442 }, { + .idcode = 0x32440aab, + .idmask = 0xffffffff, + .map_io = s3c244x_map_io, + .init_clocks = s3c244x_init_clocks, + .init_uarts = s3c244x_init_uarts, + .init = s3c2442_init, + .name = name_s3c2442b + }, + { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 4eb378c89a3..a89286b4a12 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -28,6 +28,8 @@ #include <mach/hardware.h> #include <asm/irq.h> +#include <mach/ts.h> + #include <plat/regs-serial.h> #include <plat/udc.h> @@ -199,6 +201,24 @@ struct platform_device s3c_device_nand = { EXPORT_SYMBOL(s3c_device_nand); +/* Touchscreen */ + +struct platform_device s3c_device_ts = { + .name = "s3c2410-ts", + .id = -1, + .dev.parent = &s3c_device_adc.dev, +}; + +static struct s3c2410_ts_mach_info s3c2410ts_info; + +void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info) +{ + memcpy(&s3c2410ts_info, hard_s3c2410ts_info, + sizeof(struct s3c2410_ts_mach_info)); + s3c_device_ts.dev.platform_data = &s3c2410ts_info; +} +EXPORT_SYMBOL(set_s3c2410ts_info); + /* USB Device (Gadget)*/ static struct resource s3c_usbgadget_resource[] = { diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h index 69e1be8bec3..11a866466d8 100644 --- a/arch/arm/plat-s3c24xx/include/plat/irq.h +++ b/arch/arm/plat-s3c24xx/include/plat/irq.h @@ -12,6 +12,7 @@ #include <linux/io.h> +#include <mach/irqs.h> #include <mach/hardware.h> #include <mach/regs-irq.h> #include <mach/regs-gpio.h> @@ -31,8 +32,15 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, { unsigned long mask; unsigned long submask; +#ifdef CONFIG_S3C2440_C_FIQ + unsigned long flags; +#endif submask = __raw_readl(S3C2410_INTSUBMSK); +#ifdef CONFIG_S3C2440_C_FIQ + local_save_flags(flags); + local_fiq_disable(); +#endif mask = __raw_readl(S3C2410_INTMSK); submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); @@ -45,6 +53,9 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); +#ifdef CONFIG_S3C2440_C_FIQ + local_irq_restore(flags); +#endif } @@ -53,8 +64,15 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) { unsigned long mask; unsigned long submask; +#ifdef CONFIG_S3C2440_C_FIQ + unsigned long flags; +#endif submask = __raw_readl(S3C2410_INTSUBMSK); +#ifdef CONFIG_S3C2440_C_FIQ + local_save_flags(flags); + local_fiq_disable(); +#endif mask = __raw_readl(S3C2410_INTMSK); submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); @@ -63,6 +81,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); __raw_writel(mask, S3C2410_INTMSK); +#ifdef CONFIG_S3C2440_C_FIQ + local_irq_restore(flags); +#endif } diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 958737775ad..4b21ac9d693 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -28,6 +28,8 @@ #include <asm/mach/irq.h> #include <plat/regs-irqtype.h> +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> #include <plat/cpu.h> #include <plat/pm.h> @@ -37,12 +39,20 @@ static void s3c_irq_mask(unsigned int irqno) { unsigned long mask; - +#ifdef CONFIG_S3C2440_C_FIQ + unsigned long flags; +#endif irqno -= IRQ_EINT0; - +#ifdef CONFIG_S3C2440_C_FIQ + local_save_flags(flags); + local_fiq_disable(); +#endif mask = __raw_readl(S3C2410_INTMSK); mask |= 1UL << irqno; __raw_writel(mask, S3C2410_INTMSK); +#ifdef CONFIG_S3C2440_C_FIQ + local_irq_restore(flags); +#endif } static inline void @@ -59,9 +69,19 @@ s3c_irq_maskack(unsigned int irqno) { unsigned long bitval = 1UL << (irqno - IRQ_EINT0); unsigned long mask; - +#ifdef CONFIG_S3C2440_C_FIQ + unsigned long flags; +#endif + +#ifdef CONFIG_S3C2440_C_FIQ + local_save_flags(flags); + local_fiq_disable(); +#endif mask = __raw_readl(S3C2410_INTMSK); __raw_writel(mask|bitval, S3C2410_INTMSK); +#ifdef CONFIG_S3C2440_C_FIQ + local_irq_restore(flags); +#endif __raw_writel(bitval, S3C2410_SRCPND); __raw_writel(bitval, S3C2410_INTPND); @@ -72,15 +92,25 @@ static void s3c_irq_unmask(unsigned int irqno) { unsigned long mask; +#ifdef CONFIG_S3C2440_C_FIQ + unsigned long flags; +#endif if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23) irqdbf2("s3c_irq_unmask %d\n", irqno); irqno -= IRQ_EINT0; +#ifdef CONFIG_S3C2440_C_FIQ + local_save_flags(flags); + local_fiq_disable(); +#endif mask = __raw_readl(S3C2410_INTMSK); mask &= ~(1UL << irqno); __raw_writel(mask, S3C2410_INTMSK); +#ifdef CONFIG_S3C2440_C_FIQ + local_irq_restore(flags); +#endif } struct irq_chip s3c_irq_level_chip = { @@ -523,26 +553,26 @@ void __init s3c24xx_init_irq(void) last = 0; for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_INTPND); + pend = __raw_readl(S3C2410_SUBSRCPND); if (pend == 0 || pend == last) break; - __raw_writel(pend, S3C2410_SRCPND); - __raw_writel(pend, S3C2410_INTPND); - printk("irq: clearing pending status %08x\n", (int)pend); + printk("irq: clearing subpending status %08x\n", (int)pend); + __raw_writel(pend, S3C2410_SUBSRCPND); last = pend; } last = 0; for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_SUBSRCPND); + pend = __raw_readl(S3C2410_INTPND); if (pend == 0 || pend == last) break; - printk("irq: clearing subpending status %08x\n", (int)pend); - __raw_writel(pend, S3C2410_SUBSRCPND); + __raw_writel(pend, S3C2410_SRCPND); + __raw_writel(pend, S3C2410_INTPND); + printk("irq: clearing pending status %08x\n", (int)pend); last = pend; } diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c new file mode 100644 index 00000000000..d41cccd6a25 --- /dev/null +++ b/arch/arm/plat-s3c24xx/pwm-clock.c @@ -0,0 +1,437 @@ +/* linux/arch/arm/plat-s3c24xx/pwm-clock.c + * + * Copyright (c) 2007 Simtec Electronics + * Copyright (c) 2007, 2008 Ben Dooks + * Ben Dooks <ben-linux@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> + +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> + +#include <asm/plat-s3c/regs-timer.h> + +/* Each of the timers 0 through 5 go through the following + * clock tree, with the inputs depending on the timers. + * + * pclk ---- [ prescaler 0 ] -+---> timer 0 + * +---> timer 1 + * + * pclk ---- [ prescaler 1 ] -+---> timer 2 + * +---> timer 3 + * \---> timer 4 + * + * Which are fed into the timers as so: + * + * prescaled 0 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 0 + * tclk 0 ------------------------------/ + * + * prescaled 0 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 1 + * tclk 0 ------------------------------/ + * + * + * prescaled 1 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 2 + * tclk 1 ------------------------------/ + * + * prescaled 1 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 3 + * tclk 1 ------------------------------/ + * + * prescaled 1 ---- [ div 2,4,8, 16 ] --\ + * [mux] -> timer 4 + * tclk 1 ------------------------------/ + * + * Since the mux and the divider are tied together in the + * same register space, it is impossible to set the parent + * and the rate at the same time. To avoid this, we add an + * intermediate 'prescaled-and-divided' clock to select + * as the parent for the timer input clock called tdiv. + * + * prescaled clk --> pwm-tdiv ---\ + * [ mux ] --> timer X + * tclk -------------------------/ +*/ + +static unsigned long clk_pwm_scaler_getrate(struct clk *clk) +{ + unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0); + + if (clk->id == 1) { + tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK; + tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT; + } else { + tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK; + } + + return clk_get_rate(clk->parent) / (tcfg0 + 1); +} + +/* TODO - add set rate calls. */ + +static struct clk clk_timer_scaler[] = { + [0] = { + .name = "pwm-scaler0", + .id = -1, + .get_rate = clk_pwm_scaler_getrate, + }, + [1] = { + .name = "pwm-scaler1", + .id = -1, + .get_rate = clk_pwm_scaler_getrate, + }, +}; + +static struct clk clk_timer_tclk[] = { + [0] = { + .name = "pwm-tclk0", + .id = -1, + }, + [1] = { + .name = "pwm-tclk1", + .id = -1, + }, +}; + +struct pwm_tdiv_clk { + struct clk clk; + unsigned int divisor; +}; + +static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk) +{ + return container_of(clk, struct pwm_tdiv_clk, clk); +} + +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << (1 + tcfg1); +} + +static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned int divisor; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + if (tcfg1 == S3C2410_TCFG1_MUX_TCLK) + divisor = to_tdiv(clk)->divisor; + else + divisor = tcfg_to_divisor(tcfg1); + + return clk_get_rate(clk->parent) / divisor; +} + +static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate; + unsigned long divisor; + + parent_rate = clk_get_rate(clk->parent); + divisor = parent_rate / rate; + + if (divisor <= 2) + divisor = 2; + else if (divisor <= 4) + divisor = 4; + else if (divisor <= 8) + divisor = 8; + else + divisor = 16; + + return parent_rate / divisor; +} + +static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk) +{ + unsigned long bits; + + switch (divclk->divisor) { + case 2: + bits = S3C2410_TCFG1_MUX_DIV2; + break; + case 4: + bits = S3C2410_TCFG1_MUX_DIV4; + break; + case 8: + bits = S3C2410_TCFG1_MUX_DIV8; + break; + case 16: + default: + bits = S3C2410_TCFG1_MUX_DIV16; + break; + } + + return bits; +} + +static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned long bits = clk_pwm_tdiv_bits(divclk); + unsigned long flags; + unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id); + + local_irq_save(flags); + + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); + tcfg1 |= bits << shift; + __raw_writel(tcfg1, S3C2410_TCFG1); + + local_irq_restore(flags); +} + +static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) +{ + struct pwm_tdiv_clk *divclk = to_tdiv(clk); + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long divisor; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + rate = clk_round_rate(clk, rate); + divisor = parent_rate / rate; + + if (divisor > 16) + return -EINVAL; + + divclk->divisor = divisor; + + /* Update the current MUX settings if we are currently + * selected as the clock source for this clock. */ + + if (tcfg1 != S3C2410_TCFG1_MUX_TCLK) + clk_pwm_tdiv_update(divclk); + + return 0; +} + +static struct pwm_tdiv_clk clk_timer_tdiv[] = { + [0] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[0], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + }, + }, + [1] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[0], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + } + }, + [2] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[1], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + }, + }, + [3] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[1], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + }, + }, + [4] = { + .clk = { + .name = "pwm-tdiv", + .parent = &clk_timer_scaler[1], + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, + }, + }, +}; + +static int __init clk_pwm_tdiv_register(unsigned int id) +{ + struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id]; + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + + tcfg1 >>= S3C2410_TCFG1_SHIFT(id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + divclk->clk.id = id; + divclk->divisor = tcfg_to_divisor(tcfg1); + + return s3c24xx_register_clock(&divclk->clk); +} + +static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id) +{ + return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0]; +} + +static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id) +{ + return &clk_timer_tdiv[id].clk; +} + +static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned int id = clk->id; + unsigned long tcfg1; + unsigned long flags; + unsigned long bits; + unsigned long shift = S3C2410_TCFG1_SHIFT(id); + + if (parent == s3c24xx_pwmclk_tclk(id)) + bits = S3C2410_TCFG1_MUX_TCLK << shift; + else if (parent == s3c24xx_pwmclk_tdiv(id)) + bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; + else + return -EINVAL; + + clk->parent = parent; + + local_irq_save(flags); + + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); + __raw_writel(tcfg1 | bits, S3C2410_TCFG1); + + local_irq_restore(flags); + + return 0; +} + +static struct clk clk_tin[] = { + [0] = { + .name = "pwm-tin", + .id = 0, + .set_parent = clk_pwm_tin_set_parent, + }, + [1] = { + .name = "pwm-tin", + .id = 1, + .set_parent = clk_pwm_tin_set_parent, + }, + [2] = { + .name = "pwm-tin", + .id = 2, + .set_parent = clk_pwm_tin_set_parent, + }, + [3] = { + .name = "pwm-tin", + .id = 3, + .set_parent = clk_pwm_tin_set_parent, + }, + [4] = { + .name = "pwm-tin", + .id = 4, + .set_parent = clk_pwm_tin_set_parent, + }, +}; + +static __init int clk_pwm_tin_register(struct clk *pwm) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned int id = pwm->id; + + struct clk *parent; + int ret; + + ret = s3c24xx_register_clock(pwm); + if (ret < 0) + return ret; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + if (tcfg1 == S3C2410_TCFG1_MUX_TCLK) + parent = s3c24xx_pwmclk_tclk(id); + else + parent = s3c24xx_pwmclk_tdiv(id); + + return clk_set_parent(pwm, parent); +} + +static __init int s3c24xx_pwmclk_init(void) +{ + struct clk *clk_timers; + unsigned int clk; + int ret; + + clk_timers = clk_get(NULL, "timers"); + if (IS_ERR(clk_timers)) { + printk(KERN_ERR "%s: no parent clock\n", __func__); + return -EINVAL; + } + + for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) { + clk_timer_scaler[clk].parent = clk_timers; + ret = s3c24xx_register_clock(&clk_timer_scaler[clk]); + if (ret < 0) { + printk(KERN_ERR "error adding pwm scaler%d clock\n", clk); + goto err; + } + } + + for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) { + ret = s3c24xx_register_clock(&clk_timer_tclk[clk]); + if (ret < 0) { + printk(KERN_ERR "error adding pww tclk%d\n", clk); + goto err; + } + } + + for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) { + ret = clk_pwm_tdiv_register(clk); + if (ret < 0) { + printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk); + goto err; + } + } + + for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) { + ret = clk_pwm_tin_register(&clk_tin[clk]); + if (ret < 0) { + printk(KERN_ERR "error adding pwm%d tin clock\n", clk); + goto err; + } + } + + return 0; + + err: + return ret; +} + +arch_initcall(s3c24xx_pwmclk_init); diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index 0120b760315..82a6d4de02a 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -246,6 +246,10 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) tcmp = duty_ns / tin_ns; tcmp = tcnt - tcmp; + /* the pwm hw only checks the compare register after a decrement, + so the pin never toggles if tcmp = tcnt */ + if (tcmp == tcnt) + tcmp--; pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 9edf7894eed..da7a61728c1 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -12,8 +12,7 @@ */ #include <linux/kernel.h> - -#include <mach/hardware.h> +#include <linux/gpio.h> #include <mach/spi.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index f34d0fc69ad..86b9edc6741 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -12,8 +12,7 @@ */ #include <linux/kernel.h> - -#include <mach/hardware.h> +#include <linux/gpio.h> #include <mach/spi.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c index 07a6516a4f3..47632fc7eb6 100644 --- a/arch/arm/plat-s3c64xx/pm.c +++ b/arch/arm/plat-s3c64xx/pm.c @@ -117,8 +117,6 @@ void s3c_pm_save_core(void) * this. */ -#include <plat/regs-gpio.h> - static void s3c64xx_cpu_suspend(void) { unsigned long tmp; diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 1debc1f9f98..febac1950d8 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, u32 div; if (parent < rate) - return rate; + return parent; div = (parent / rate) - 1; if (div > armclk_mask) @@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) div = clk_get_rate(clk->parent) / rate; val = __raw_readl(S3C_CLK_DIV0); - val &= armclk_mask; + val &= ~armclk_mask; val |= (div - 1); __raw_writel(val, S3C_CLK_DIV0); diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c index d4120038220..6d6b1a468ed 100644 --- a/arch/arm/plat-stmp3xxx/pinmux.c +++ b/arch/arm/plat-stmp3xxx/pinmux.c @@ -22,7 +22,6 @@ #include <linux/sysdev.h> #include <linux/string.h> #include <linux/bitops.h> -#include <linux/sysdev.h> #include <linux/irq.h> #include <mach/hardware.h> |