diff options
Diffstat (limited to 'arch/arm')
91 files changed, 1511 insertions, 319 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 94003142082..7d5121260fd 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -121,7 +121,7 @@ endif machine-$(CONFIG_ARCH_OMAP3) := omap2 plat-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 - plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx + plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx diff --git a/arch/arm/include/asm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h deleted file mode 100644 index 480c873fa74..00000000000 --- a/arch/arm/include/asm/cnt32_to_63.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits - * - * Author: Nicolas Pitre - * Created: December 3, 2006 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#ifndef __INCLUDE_CNT32_TO_63_H__ -#define __INCLUDE_CNT32_TO_63_H__ - -#include <linux/compiler.h> -#include <asm/types.h> -#include <asm/byteorder.h> - -/* - * Prototype: u64 cnt32_to_63(u32 cnt) - * Many hardware clock counters are only 32 bits wide and therefore have - * a relatively short period making wrap-arounds rather frequent. This - * is a problem when implementing sched_clock() for example, where a 64-bit - * non-wrapping monotonic value is expected to be returned. - * - * To overcome that limitation, let's extend a 32-bit counter to 63 bits - * in a completely lock free fashion. Bits 0 to 31 of the clock are provided - * by the hardware while bits 32 to 62 are stored in memory. The top bit in - * memory is used to synchronize with the hardware clock half-period. When - * the top bit of both counters (hardware and in memory) differ then the - * memory is updated with a new value, incrementing it when the hardware - * counter wraps around. - * - * Because a word store in memory is atomic then the incremented value will - * always be in synch with the top bit indicating to any potential concurrent - * reader if the value in memory is up to date or not with regards to the - * needed increment. And any race in updating the value in memory is harmless - * as the same value would simply be stored more than once. - * - * The only restriction for the algorithm to work properly is that this - * code must be executed at least once per each half period of the 32-bit - * counter to properly update the state bit in memory. This is usually not a - * problem in practice, but if it is then a kernel timer could be scheduled - * to manage for this code to be executed often enough. - * - * Note that the top bit (bit 63) in the returned value should be considered - * as garbage. It is not cleared here because callers are likely to use a - * multiplier on the returned value which can get rid of the top bit - * implicitly by making the multiplier even, therefore saving on a runtime - * clear-bit instruction. Otherwise caller must remember to clear the top - * bit explicitly. - */ - -/* this is used only to give gcc a clue about good code generation */ -typedef union { - struct { -#if defined(__LITTLE_ENDIAN) - u32 lo, hi; -#elif defined(__BIG_ENDIAN) - u32 hi, lo; -#endif - }; - u64 val; -} cnt32_to_63_t; - -#define cnt32_to_63(cnt_lo) \ -({ \ - static volatile u32 __m_cnt_hi = 0; \ - cnt32_to_63_t __x; \ - __x.hi = __m_cnt_hi; \ - __x.lo = (cnt_lo); \ - if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ - __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ - __x.val; \ -}) - -#endif diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index aaffaecffcd..ba8ccfede96 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -111,8 +111,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo, case 'D': case 'k': case 'c': - kgdb_contthread = NULL; - /* * Try to read optional parameter, pc unchanged if no parm. * If this was a compiled breakpoint, we need to move diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 42b976e8a7e..58754f066d5 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -70,9 +70,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; - if (id < 0) - return; - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); if (enable) mdctl |= 0x00000003; /* Enable Module */ diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 18d14974583..f8a9a62959e 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -17,9 +17,9 @@ #include <linux/interrupt.h> #include <linux/clockchips.h> #include <linux/sched.h> +#include <linux/cnt32_to_63.h> #include <asm/div64.h> -#include <asm/cnt32_to_63.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> #include <mach/pxa-regs.h> diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 75738000272..9a37c87152b 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -38,7 +38,7 @@ #include <mach/bast-map.h> #include <mach/bast-irq.h> -#include <asm/plat-s3c24xx/irq.h> +#include <plat/irq.h> #if 0 #include <asm/debug-ll.h> diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index fef646c36b5..4e07943c1e2 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -37,13 +37,13 @@ #include <mach/hardware.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2410.h> +#include <plat/clock.h> +#include <plat/cpu.h> int s3c2410_clkcon_enable(struct clk *clk, int enable) { diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 8730797749e..7d914a470b6 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -20,10 +20,10 @@ #include <asm/dma.h> #include <mach/dma.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/dma.h> +#include <plat/cpu.h> +#include <plat/dma.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <asm/plat-s3c/regs-ac97.h> #include <mach/regs-mem.h> diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S index 682df23087a..4c29a89ad07 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) @@ -99,4 +99,4 @@ /* include the reset of the code which will do the work */ -#include <asm/plat-s3c/debug-macro.S> +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 64bf7e94a5b..23c470c2e5b 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H -#include <asm/plat-s3c/map.h> +#include <plat/map.h> #define S3C2410_ADDR(x) S3C_ADDR(x) diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h index 708e47459ff..ab39491beee 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -21,7 +21,7 @@ #undef S3C2410_GPIOREG #define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) -#include <asm/plat-s3c/uncompress.h> +#include <plat/uncompress.h> static inline int is_arm926(void) { diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index f5c5c53e1cc..92150399563 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -25,8 +25,8 @@ #include <linux/ioport.h> #include <linux/sysdev.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/cpu.h> +#include <plat/pm.h> static int s3c2410_irq_add(struct sys_device *sysdev) { diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 527f88a288e..d061fea0190 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -48,12 +48,12 @@ #include <asm/mach-types.h> #include <mach/fb.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-lcd.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/devs.h> +#include <plat/cpu.h> #ifdef CONFIG_MTD_PARTITIONS diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index e4368e6e7e6..8db9c700e3c 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -39,7 +39,7 @@ #include <asm/mach-types.h> //#include <asm/debug-ll.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> @@ -55,9 +55,9 @@ #include <linux/serial_8250.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> #include "usb-simtec.h" #include "nor-simtec.h" diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 85e710f2863..98716d0108e 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -30,7 +30,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-lcd.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> @@ -40,10 +40,10 @@ #include <mach/fb.h> #include <asm/plat-s3c24xx/udc.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pm.h> static struct map_desc h1940_iodesc[] __initdata = { [0] = { diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 3ece2d04934..82505517846 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -41,12 +41,12 @@ #include <asm/mach/map.h> #include <asm/plat-s3c/iic.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/s3c2410.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s3c2410.h> #include <asm/plat-s3c24xx/udc.h> static struct map_desc n30_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index c4dfe3eabe1..d8255cf87e4 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -29,13 +29,13 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2410.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> static struct map_desc otom11_iodesc[] __initdata = { /* Device area */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 97c13192315..661807e14e8 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -48,17 +48,17 @@ #include <mach/regs-gpio.h> #include <mach/leds-gpio.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/fb.h> #include <asm/plat-s3c/nand.h> #include <asm/plat-s3c24xx/udc.h> #include <mach/spi.h> #include <mach/spi-gpio.h> -#include <asm/plat-s3c24xx/common-smdk.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/common-smdk.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pm.h> static struct map_desc qt2410_iodesc[] __initdata = { { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index d49e58acb03..152527bb287 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -46,12 +46,12 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/devs.h> +#include <plat/cpu.h> -#include <asm/plat-s3c24xx/common-smdk.h> +#include <plat/common-smdk.h> static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index cc2e79fe4f9..309dcf4c870 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -44,9 +44,9 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/regs-serial.h> +#include <plat/devs.h> +#include <plat/cpu.h> #ifdef CONFIG_MTD_PARTITIONS diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index ed3acb05c85..941353af16d 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -40,13 +40,13 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/leds-gpio.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> #include "usb-simtec.h" #include "nor-simtec.h" diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 733f8a22777..a6970f61319 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -34,8 +34,8 @@ #include <mach/regs-gpio.h> #include <mach/h1940.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/cpu.h> +#include <plat/pm.h> #ifdef CONFIG_S3C2410_PM_DEBUG extern void pm_dbg(const char *fmt, ...); diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index b1e658c917a..ac79b536c4c 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -29,12 +29,12 @@ #include <asm/irq.h> #include <mach/regs-clock.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/clock.h> +#include <plat/s3c2410.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> /* Initial IO mappings */ diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index be37f221a17..dd5b6388a5a 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -32,7 +32,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-clock.h> #include <mach/regs-mem.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> /* s3c2410_cpu_suspend * diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index eb6fc0bfd47..6078f09b7df 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -35,7 +35,7 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/plat-s3c24xx/devs.h> +#include <plat/devs.h> #include "usb-simtec.h" /* control power and monitor over-current events on various Simtec diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 5fbaac6054f..96d9eb15424 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -37,13 +37,13 @@ #include <mach/hardware.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/s3c2412.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2412.h> +#include <plat/clock.h> +#include <plat/cpu.h> /* We currently have to assume that the system is running * from the XTPll input, and that all ***REFCLKs are being diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index dcfff6b8b95..ba0591e71f3 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -21,10 +21,10 @@ #include <asm/dma.h> #include <mach/dma.h> -#include <asm/plat-s3c24xx/dma.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/dma.h> +#include <plat/cpu.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <asm/plat-s3c/regs-ac97.h> #include <mach/regs-mem.h> diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index 41720f2c1fe..6000ca9d181 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -35,9 +35,9 @@ #include <mach/regs-gpio.h> #include <mach/regs-power.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/irq.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/cpu.h> +#include <plat/irq.h> +#include <plat/pm.h> #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) #define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index ad980a1690c..b08f18c8c47 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -30,7 +30,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <asm/plat-s3c/nand.h> #include <asm/plat-s3c/iic.h> @@ -48,10 +48,10 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pm.h> #include <asm/plat-s3c24xx/udc.h> static struct map_desc jive_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 8f8d9117b96..c719b5a740a 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -32,7 +32,7 @@ #include <asm/mach-types.h> //#include <asm/debug-ll.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> @@ -40,13 +40,13 @@ #include <asm/plat-s3c24xx/udc.h> #include <mach/fb.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/s3c2412.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2410.h> +#include <plat/s3c2412.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> -#include <asm/plat-s3c24xx/common-smdk.h> +#include <plat/common-smdk.h> static struct map_desc smdk2413_iodesc[] __initdata = { }; diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index bb9bf63b2e0..4cfa19ad9be 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -32,7 +32,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> @@ -41,11 +41,11 @@ #include <asm/plat-s3c/nand.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/s3c2412.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2410.h> +#include <plat/s3c2412.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> static struct map_desc vstms_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 9540ef752f7..217e9e4ed45 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -28,10 +28,10 @@ #include <mach/regs-gpio.h> #include <mach/regs-dsc.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/cpu.h> +#include <plat/pm.h> -#include <asm/plat-s3c24xx/s3c2412.h> +#include <plat/s3c2412.h> extern void s3c2412_sleep_enter(void); diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 42440fc5568..313759c3da6 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -34,7 +34,7 @@ #include <mach/idle.h> #include <mach/regs-clock.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> #include <mach/regs-gpioj.h> @@ -42,11 +42,11 @@ #include <asm/plat-s3c24xx/regs-spi.h> #include <mach/regs-s3c2412.h> -#include <asm/plat-s3c24xx/s3c2412.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/s3c2412.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/pm.h> #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index 40503a65bac..d1c29b2537c 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -41,8 +41,8 @@ #include <mach/regs-clock.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/cpu.h> /* S3C2440 extended clock support */ diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index cdd4e6e79ac..32303f6a832 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -20,10 +20,10 @@ #include <asm/dma.h> #include <mach/dma.h> -#include <asm/plat-s3c24xx/dma.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/dma.h> +#include <plat/cpu.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <asm/plat-s3c/regs-ac97.h> #include <mach/regs-mem.h> diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c index 4f7d06baf0d..55404427277 100644 --- a/arch/arm/mach-s3c2440/dsc.c +++ b/arch/arm/mach-s3c2440/dsc.c @@ -27,8 +27,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-dsc.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/s3c2440.h> +#include <plat/cpu.h> +#include <plat/s3c2440.h> int s3c2440_set_dsc(unsigned int pin, unsigned int value) { diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 33e3ede0a2b..63c5ab65727 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -34,9 +34,9 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> -#include <asm/plat-s3c24xx/irq.h> +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> /* WDT/AC97 */ diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 19eb0e5269a..e2beca47048 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -35,7 +35,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> @@ -48,9 +48,9 @@ #include <net/ax88796.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> #define COPYRIGHT ", (c) 2005 Simtec Electronics" diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index f0f0cc6afcf..66876c6f2f1 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -31,7 +31,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> @@ -42,9 +42,9 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> static struct map_desc at2440evb_iodesc[] __initdata = { /* Nothing here */ diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 49e828d1d4d..a546307fd53 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -36,13 +36,13 @@ //#include <asm/debug-ll.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/s3c2440.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2410.h> +#include <plat/s3c2440.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> static struct map_desc nexcoder_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 85144aa52c2..2361d606abc 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -33,7 +33,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> @@ -44,9 +44,9 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> /* onboard perihperal map */ diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index a4c690456d1..4d14c7cff89 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -37,7 +37,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> @@ -45,10 +45,10 @@ #include <asm/plat-s3c/nand.h> #include <mach/fb.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pm.h> static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 7ac60b869e7..fefeaaa4155 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -31,20 +31,20 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/idle.h> #include <mach/fb.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/s3c2440.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2410.h> +#include <plat/s3c2440.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> -#include <asm/plat-s3c24xx/common-smdk.h> +#include <plat/common-smdk.h> static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index c81cdb33071..ac1f7ea5f40 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -29,9 +29,9 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/plat-s3c24xx/s3c2440.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2440.h> +#include <plat/devs.h> +#include <plat/cpu.h> static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c index 18f2ce4d7b2..ea1aa1f5157 100644 --- a/arch/arm/mach-s3c2442/clock.c +++ b/arch/arm/mach-s3c2442/clock.c @@ -41,8 +41,8 @@ #include <mach/regs-clock.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/cpu.h> /* S3C2442 extended clock support */ diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c index fbf8264249d..4663bdc7fff 100644 --- a/arch/arm/mach-s3c2442/s3c2442.c +++ b/arch/arm/mach-s3c2442/s3c2442.c @@ -19,8 +19,8 @@ #include <linux/serial_core.h> #include <linux/sysdev.h> -#include <asm/plat-s3c24xx/s3c2442.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2442.h> +#include <plat/cpu.h> static struct sys_device s3c2442_sysdev = { .cls = &s3c2442_sysclass, diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 603b5ea1dea..2f60bf6b8d4 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -39,9 +39,9 @@ #include <mach/regs-s3c2443-clock.h> -#include <asm/plat-s3c24xx/s3c2443.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2443.h> +#include <plat/clock.h> +#include <plat/cpu.h> /* We currently have to assume that the system is running * from the XTPll input, and that all ***REFCLKs are being diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 5d9ee772659..f73ccb25ff9 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -21,10 +21,10 @@ #include <asm/dma.h> #include <mach/dma.h> -#include <asm/plat-s3c24xx/dma.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/dma.h> +#include <plat/cpu.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <asm/plat-s3c/regs-ac97.h> #include <mach/regs-mem.h> diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index e44341d7dfe..0e0d693f397 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -34,9 +34,9 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> -#include <asm/plat-s3c24xx/irq.h> +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index f0d119dc040..a7fe65f3dcc 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -31,20 +31,20 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/idle.h> #include <mach/fb.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/s3c2440.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2410.h> +#include <plat/s3c2440.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> -#include <asm/plat-s3c24xx/common-smdk.h> +#include <plat/common-smdk.h> static struct map_desc smdk2443_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index c973b68cc73..bbeddf9ddcb 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -32,9 +32,9 @@ #include <mach/regs-s3c2443-clock.h> #include <mach/reset.h> -#include <asm/plat-s3c24xx/s3c2443.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/s3c2443.h> +#include <plat/devs.h> +#include <plat/cpu.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index b9fae2a3985..c1fbd5b5f9c 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -18,9 +18,9 @@ #include <linux/ioport.h> #include <linux/sched.h> /* just for sched_clock() - funny that */ #include <linux/platform_device.h> +#include <linux/cnt32_to_63.h> #include <asm/div64.h> -#include <asm/cnt32_to_63.h> #include <mach/hardware.h> #include <asm/system.h> #include <asm/pgtable.h> diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h index bc120850d31..cc6b4bfcecf 100644 --- a/arch/arm/mach-sa1100/include/mach/jornada720.h +++ b/arch/arm/mach-sa1100/include/mach/jornada720.h @@ -1,10 +1,10 @@ /* * arch/arm/mach-sa1100/include/mach/jornada720.h * - * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728 + * SSP/MCU communication definitions for HP Jornada 710/720/728 * - * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> - * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu> + * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> + * Copyright 2000 John Ankcorn <jca@lcs.mit.edu> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,3 +25,8 @@ #define PWMOFF 0xDF #define TXDUMMY 0x11 #define ERRORCODE 0x00 + +extern void jornada_ssp_start(void); +extern void jornada_ssp_end(void); +extern int jornada_ssp_inout(u8 byte); +extern int jornada_ssp_byte(u8 byte); diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 06ea7abd917..28cf3696797 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -21,8 +21,8 @@ #include <linux/slab.h> #include <mach/hardware.h> -#include <asm/hardware/ssp.h> #include <mach/jornada720.h> +#include <asm/hardware/ssp.h> static DEFINE_SPINLOCK(jornada_ssp_lock); static unsigned long jornada_ssp_flags; @@ -109,12 +109,12 @@ EXPORT_SYMBOL(jornada_ssp_inout); * jornada_ssp_start - enable mcu * */ -int jornada_ssp_start() +void jornada_ssp_start(void) { spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags); GPCR = GPIO_GPIO25; udelay(50); - return 0; + return; }; EXPORT_SYMBOL(jornada_ssp_start); @@ -122,11 +122,11 @@ EXPORT_SYMBOL(jornada_ssp_start); * jornada_ssp_end - disable mcu and turn off lock * */ -int jornada_ssp_end() +void jornada_ssp_end(void) { GPSR = GPIO_GPIO25; spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags); - return 0; + return; }; EXPORT_SYMBOL(jornada_ssp_end); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 824121d52b8..1553d986dcb 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -29,8 +29,8 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> +#include <linux/cnt32_to_63.h> -#include <asm/cnt32_to_63.h> #include <asm/system.h> #include <mach/hardware.h> #include <asm/irq.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 25232b281e1..ed94dee326c 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -313,19 +313,6 @@ static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf) omap_cfg_reg(MMC_DAT3); } } -#if defined(CONFIG_ARCH_OMAP2420) - if (mmc_conf->mmc[0].internal_clock) { - /* - * Use internal loop-back in MMC/SDIO - * Module Input Clock selection - */ - if (cpu_is_omap24xx()) { - u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); /* not used in 243x */ - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - } - } -#endif } #ifdef CONFIG_ARCH_OMAP16XX diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile new file mode 100644 index 00000000000..f03d7b35ba3 --- /dev/null +++ b/arch/arm/plat-s3c/Makefile @@ -0,0 +1,3 @@ +# dummy makefile, currently just including asm/arm/plat-s3c/include/plat + +obj-n := dummy.o diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S new file mode 100644 index 00000000000..4aa7e2e6c00 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/debug-macro.S @@ -0,0 +1,75 @@ +/* linux/include/asm-arm/plat-s3c/debug-macro.S + * + * Copyright 2005, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/regs-serial.h> + +/* The S3C2440 implementations are used by default as they are the + * most widely re-used */ + + .macro fifo_level_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2440_UFSTAT_TXMASK + .endm + +#ifndef fifo_level +#define fifo_level fifo_level_s3c2410 +#endif + + .macro fifo_full_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2440_UFSTAT_TXFULL + .endm + +#ifndef fifo_full +#define fifo_full fifo_full_s3c2440 +#endif + + .macro senduart,rd,rx + strb \rd, [\rx, # S3C2410_UTXH ] + .endm + + .macro busyuart, rd, rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_full \rd, \rx + bne 1003b + b 1002f + +1001: + @ busy waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm + + .macro waituart,rd,rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_level \rd, \rx + teq \rd, #0 + bne 1003b + b 1002f +1001: + @ idle waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map.h new file mode 100644 index 00000000000..b84289d32a5 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/map.h @@ -0,0 +1,40 @@ +/* linux/include/asm-arm/plat-s3c/map.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - Memory map definitions (virtual addresses) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_H +#define __ASM_PLAT_MAP_H __FILE__ + +/* Fit all our registers in at 0xF4000000 upwards, trying to use as + * little of the VA space as possible so vmalloc and friends have a + * better chance of getting memory. + * + * we try to ensure stuff like the IRQ registers are available for + * an single MOVS instruction (ie, only 8 bits of set data) + */ + +#define S3C_ADDR_BASE (0xF4000000) + +#ifndef __ASSEMBLY__ +#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) +#else +#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) +#endif + +#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */ +#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */ +#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */ +#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */ +#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ +#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ + +#endif /* __ASM_PLAT_MAP_H */ diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-s3c/include/plat/regs-adc.h new file mode 100644 index 00000000000..4323cccc86c --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-adc.h @@ -0,0 +1,60 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-adc.h + * + * Copyright (c) 2004 Shannon Holland <holland@loser.net> + * + * This program is free software; yosu can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 ADC registers +*/ + +#ifndef __ASM_ARCH_REGS_ADC_H +#define __ASM_ARCH_REGS_ADC_H "regs-adc.h" + +#define S3C2410_ADCREG(x) (x) + +#define S3C2410_ADCCON S3C2410_ADCREG(0x00) +#define S3C2410_ADCTSC S3C2410_ADCREG(0x04) +#define S3C2410_ADCDLY S3C2410_ADCREG(0x08) +#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) +#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) + + +/* ADCCON Register Bits */ +#define S3C2410_ADCCON_ECFLG (1<<15) +#define S3C2410_ADCCON_PRSCEN (1<<14) +#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) +#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6) +#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3) +#define S3C2410_ADCCON_MUXMASK (0x7<<3) +#define S3C2410_ADCCON_STDBM (1<<2) +#define S3C2410_ADCCON_READ_START (1<<1) +#define S3C2410_ADCCON_ENABLE_START (1<<0) +#define S3C2410_ADCCON_STARTMASK (0x3<<0) + + +/* ADCTSC Register Bits */ +#define S3C2410_ADCTSC_YM_SEN (1<<7) +#define S3C2410_ADCTSC_YP_SEN (1<<6) +#define S3C2410_ADCTSC_XM_SEN (1<<5) +#define S3C2410_ADCTSC_XP_SEN (1<<4) +#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) +#define S3C2410_ADCTSC_AUTO_PST (1<<2) +#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0) + +/* ADCDAT0 Bits */ +#define S3C2410_ADCDAT0_UPDOWN (1<<15) +#define S3C2410_ADCDAT0_AUTO_PST (1<<14) +#define S3C2410_ADCDAT0_XY_PST (0x3<<12) +#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF) + +/* ADCDAT1 Bits */ +#define S3C2410_ADCDAT1_UPDOWN (1<<15) +#define S3C2410_ADCDAT1_AUTO_PST (1<<14) +#define S3C2410_ADCDAT1_XY_PST (0x3<<12) +#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF) + +#endif /* __ASM_ARCH_REGS_ADC_H */ + + diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h new file mode 100644 index 00000000000..a0daa647b92 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -0,0 +1,232 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-serial.h + * + * From linux/include/asm-arm/hardware/serial_s3c2410.h + * + * Internal header file for Samsung S3C2410 serial ports (UART0-2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk) + * + * Adapted from: + * + * Internal header file for MX1ADS serial ports (UART1 & 2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef __ASM_ARM_REGS_SERIAL_H +#define __ASM_ARM_REGS_SERIAL_H + +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) + +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + +#define S3C2410_URXH (0x24) +#define S3C2410_UTXH (0x20) +#define S3C2410_ULCON (0x00) +#define S3C2410_UCON (0x04) +#define S3C2410_UFCON (0x08) +#define S3C2410_UMCON (0x0C) +#define S3C2410_UBRDIV (0x28) +#define S3C2410_UTRSTAT (0x10) +#define S3C2410_UERSTAT (0x14) +#define S3C2410_UFSTAT (0x18) +#define S3C2410_UMSTAT (0x1C) + +#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) + +#define S3C2410_LCON_CS5 (0x0) +#define S3C2410_LCON_CS6 (0x1) +#define S3C2410_LCON_CS7 (0x2) +#define S3C2410_LCON_CS8 (0x3) +#define S3C2410_LCON_CSMASK (0x3) + +#define S3C2410_LCON_PNONE (0x0) +#define S3C2410_LCON_PEVEN (0x5 << 3) +#define S3C2410_LCON_PODD (0x4 << 3) +#define S3C2410_LCON_PMASK (0x7 << 3) + +#define S3C2410_LCON_STOPB (1<<2) +#define S3C2410_LCON_IRM (1<<6) + +#define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_PCLK (0<<10) +#define S3C2440_UCON_UCLK (1<<10) +#define S3C2440_UCON_PCLK2 (2<<10) +#define S3C2440_UCON_FCLK (3<<10) +#define S3C2443_UCON_EPLL (3<<10) + +#define S3C2440_UCON2_FCLK_EN (1<<15) +#define S3C2440_UCON0_DIVMASK (15 << 12) +#define S3C2440_UCON1_DIVMASK (15 << 12) +#define S3C2440_UCON2_DIVMASK (7 << 12) +#define S3C2440_UCON_DIVSHIFT (12) + +#define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_UCLK (1<<10) +#define S3C2412_UCON_USYSCLK (3<<10) +#define S3C2412_UCON_PCLK (0<<10) +#define S3C2412_UCON_PCLK2 (2<<10) + +#define S3C2410_UCON_UCLK (1<<10) +#define S3C2410_UCON_SBREAK (1<<4) + +#define S3C2410_UCON_TXILEVEL (1<<9) +#define S3C2410_UCON_RXILEVEL (1<<8) +#define S3C2410_UCON_TXIRQMODE (1<<2) +#define S3C2410_UCON_RXIRQMODE (1<<0) +#define S3C2410_UCON_RXFIFO_TOI (1<<7) +#define S3C2443_UCON_RXERR_IRQEN (1<<6) +#define S3C2443_UCON_LOOPBACK (1<<5) + +#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI) + +#define S3C2410_UFCON_FIFOMODE (1<<0) +#define S3C2410_UFCON_TXTRIG0 (0<<6) +#define S3C2410_UFCON_RXTRIG8 (1<<4) +#define S3C2410_UFCON_RXTRIG12 (2<<4) + +/* S3C2440 FIFO trigger levels */ +#define S3C2440_UFCON_RXTRIG1 (0<<4) +#define S3C2440_UFCON_RXTRIG8 (1<<4) +#define S3C2440_UFCON_RXTRIG16 (2<<4) +#define S3C2440_UFCON_RXTRIG32 (3<<4) + +#define S3C2440_UFCON_TXTRIG0 (0<<6) +#define S3C2440_UFCON_TXTRIG16 (1<<6) +#define S3C2440_UFCON_TXTRIG32 (2<<6) +#define S3C2440_UFCON_TXTRIG48 (3<<6) + +#define S3C2410_UFCON_RESETBOTH (3<<1) +#define S3C2410_UFCON_RESETTX (1<<2) +#define S3C2410_UFCON_RESETRX (1<<1) + +#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2410_UFCON_TXTRIG0 | \ + S3C2410_UFCON_RXTRIG8 ) + +#define S3C2410_UMCOM_AFC (1<<4) +#define S3C2410_UMCOM_RTS_LOW (1<<0) + +#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ +#define S3C2412_UMCON_AFC_56 (1<<5) +#define S3C2412_UMCON_AFC_48 (2<<5) +#define S3C2412_UMCON_AFC_40 (3<<5) +#define S3C2412_UMCON_AFC_32 (4<<5) +#define S3C2412_UMCON_AFC_24 (5<<5) +#define S3C2412_UMCON_AFC_16 (6<<5) +#define S3C2412_UMCON_AFC_8 (7<<5) + +#define S3C2410_UFSTAT_TXFULL (1<<9) +#define S3C2410_UFSTAT_RXFULL (1<<8) +#define S3C2410_UFSTAT_TXMASK (15<<4) +#define S3C2410_UFSTAT_TXSHIFT (4) +#define S3C2410_UFSTAT_RXMASK (15<<0) +#define S3C2410_UFSTAT_RXSHIFT (0) + +/* UFSTAT S3C2443 same as S3C2440 */ +#define S3C2440_UFSTAT_TXFULL (1<<14) +#define S3C2440_UFSTAT_RXFULL (1<<6) +#define S3C2440_UFSTAT_TXSHIFT (8) +#define S3C2440_UFSTAT_RXSHIFT (0) +#define S3C2440_UFSTAT_TXMASK (63<<8) +#define S3C2440_UFSTAT_RXMASK (63) + +#define S3C2410_UTRSTAT_TXE (1<<2) +#define S3C2410_UTRSTAT_TXFE (1<<1) +#define S3C2410_UTRSTAT_RXDR (1<<0) + +#define S3C2410_UERSTAT_OVERRUN (1<<0) +#define S3C2410_UERSTAT_FRAME (1<<2) +#define S3C2410_UERSTAT_BREAK (1<<3) +#define S3C2443_UERSTAT_PARITY (1<<1) + +#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ + S3C2410_UERSTAT_FRAME | \ + S3C2410_UERSTAT_BREAK) + +#define S3C2410_UMSTAT_CTS (1<<0) +#define S3C2410_UMSTAT_DeltaCTS (1<<2) + +#define S3C2443_DIVSLOT (0x2C) + +#ifndef __ASSEMBLY__ + +/* struct s3c24xx_uart_clksrc + * + * this structure defines a named clock source that can be used for the + * uart, so that the best clock can be selected for the requested baud + * rate. + * + * min_baud and max_baud define the range of baud-rates this clock is + * acceptable for, if they are both zero, it is assumed any baud rate that + * can be generated from this clock will be used. + * + * divisor gives the divisor from the clock to the one seen by the uart +*/ + +struct s3c24xx_uart_clksrc { + const char *name; + unsigned int divisor; + unsigned int min_baud; + unsigned int max_baud; +}; + +/* configuration structure for per-machine configurations for the + * serial port + * + * the pointer is setup by the machine specific initialisation from the + * arch/arm/mach-s3c2410/ directory. +*/ + +struct s3c2410_uartcfg { + unsigned char hwport; /* hardware port number */ + unsigned char unused; + unsigned short flags; + upf_t uart_flags; /* default uart flags */ + + unsigned long ucon; /* value of ucon for port */ + unsigned long ulcon; /* value of ulcon for port */ + unsigned long ufcon; /* value of ufcon for port */ + + struct s3c24xx_uart_clksrc *clocks; + unsigned int clocks_size; +}; + +/* s3c24xx_uart_devs + * + * this is exported from the core as we cannot use driver_register(), + * or platform_add_device() before the console_initcall() +*/ + +extern struct platform_device *s3c24xx_uart_devs[3]; + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARM_REGS_SERIAL_H */ + diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h new file mode 100644 index 00000000000..cc0eedd53e3 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-timer.h @@ -0,0 +1,115 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-timer.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Timer configuration +*/ + + +#ifndef __ASM_ARCH_REGS_TIMER_H +#define __ASM_ARCH_REGS_TIMER_H + +#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) +#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) + +#define S3C2410_TCFG0 S3C_TIMERREG(0x00) +#define S3C2410_TCFG1 S3C_TIMERREG(0x04) +#define S3C2410_TCON S3C_TIMERREG(0x08) + +#define S3C2410_TCFG_PRESCALER0_MASK (255<<0) +#define S3C2410_TCFG_PRESCALER1_MASK (255<<8) +#define S3C2410_TCFG_PRESCALER1_SHIFT (8) +#define S3C2410_TCFG_DEADZONE_MASK (255<<16) +#define S3C2410_TCFG_DEADZONE_SHIFT (16) + +#define S3C2410_TCFG1_MUX4_DIV2 (0<<16) +#define S3C2410_TCFG1_MUX4_DIV4 (1<<16) +#define S3C2410_TCFG1_MUX4_DIV8 (2<<16) +#define S3C2410_TCFG1_MUX4_DIV16 (3<<16) +#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16) +#define S3C2410_TCFG1_MUX4_MASK (15<<16) +#define S3C2410_TCFG1_MUX4_SHIFT (16) + +#define S3C2410_TCFG1_MUX3_DIV2 (0<<12) +#define S3C2410_TCFG1_MUX3_DIV4 (1<<12) +#define S3C2410_TCFG1_MUX3_DIV8 (2<<12) +#define S3C2410_TCFG1_MUX3_DIV16 (3<<12) +#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12) +#define S3C2410_TCFG1_MUX3_MASK (15<<12) + + +#define S3C2410_TCFG1_MUX2_DIV2 (0<<8) +#define S3C2410_TCFG1_MUX2_DIV4 (1<<8) +#define S3C2410_TCFG1_MUX2_DIV8 (2<<8) +#define S3C2410_TCFG1_MUX2_DIV16 (3<<8) +#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8) +#define S3C2410_TCFG1_MUX2_MASK (15<<8) + + +#define S3C2410_TCFG1_MUX1_DIV2 (0<<4) +#define S3C2410_TCFG1_MUX1_DIV4 (1<<4) +#define S3C2410_TCFG1_MUX1_DIV8 (2<<4) +#define S3C2410_TCFG1_MUX1_DIV16 (3<<4) +#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4) +#define S3C2410_TCFG1_MUX1_MASK (15<<4) + +#define S3C2410_TCFG1_MUX0_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX0_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX0_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX0_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) +#define S3C2410_TCFG1_MUX0_MASK (15<<0) + +#define S3C2410_TCFG1_MUX_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX_TCLK (4<<0) +#define S3C2410_TCFG1_MUX_MASK (15<<0) + +#define S3C2410_TCFG1_SHIFT(x) ((x) * 4) + +/* for each timer, we have an count buffer, an compare buffer and + * an observation buffer +*/ + +/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ + +#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) +#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) +#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) + +#define S3C2410_TCON_T4RELOAD (1<<22) +#define S3C2410_TCON_T4MANUALUPD (1<<21) +#define S3C2410_TCON_T4START (1<<20) + +#define S3C2410_TCON_T3RELOAD (1<<19) +#define S3C2410_TCON_T3INVERT (1<<18) +#define S3C2410_TCON_T3MANUALUPD (1<<17) +#define S3C2410_TCON_T3START (1<<16) + +#define S3C2410_TCON_T2RELOAD (1<<15) +#define S3C2410_TCON_T2INVERT (1<<14) +#define S3C2410_TCON_T2MANUALUPD (1<<13) +#define S3C2410_TCON_T2START (1<<12) + +#define S3C2410_TCON_T1RELOAD (1<<11) +#define S3C2410_TCON_T1INVERT (1<<10) +#define S3C2410_TCON_T1MANUALUPD (1<<9) +#define S3C2410_TCON_T1START (1<<8) + +#define S3C2410_TCON_T0DEADZONE (1<<4) +#define S3C2410_TCON_T0RELOAD (1<<3) +#define S3C2410_TCON_T0INVERT (1<<2) +#define S3C2410_TCON_T0MANUALUPD (1<<1) +#define S3C2410_TCON_T0START (1<<0) + +#endif /* __ASM_ARCH_REGS_TIMER_H */ + + + diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h new file mode 100644 index 00000000000..4df006b9cc1 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/uncompress.h @@ -0,0 +1,155 @@ +/* linux/include/asm-arm/plat-s3c/uncompress.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_UNCOMPRESS_H +#define __ASM_PLAT_UNCOMPRESS_H + +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ + +/* uart setup */ + +static unsigned int fifo_mask; +static unsigned int fifo_max; + +/* forward declerations */ + +static void arch_detect_cpu(void); + +/* defines for UART registers */ + +#include <plat/regs-serial.h> +#include <asm/plat-s3c/regs-watchdog.h> + +/* working in physical space... */ +#undef S3C2410_WDOGREG +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) + +static __inline__ void +uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int +uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + +/* we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... +*/ + +static void putc(int ch) +{ + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + level &= fifo_mask; + + if (level < fifo_max) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static inline void flush(void) +{ +} + +#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) + +/* CONFIG_S3C_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process +*/ + +#ifdef CONFIG_S3C_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +#ifdef CONFIG_S3C_BOOT_ERROR_RESET + +static void arch_decomp_error(const char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System resetting\n"); + + __raw_writel(0x4000, S3C2410_WTDAT); + __raw_writel(0x4000, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + + while(1); +} + +#define arch_error arch_decomp_error +#endif + +static void error(char *err); + +static void +arch_decomp_setup(void) +{ + /* we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_detect_cpu(); + arch_decomp_wdog_start(); +} + + +#endif /* __ASM_PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 400541359bf..a005ddbd9ef 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -47,8 +47,8 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/cpu.h> /* clock information */ diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index d528f460f6b..3098736c65d 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -40,9 +40,9 @@ #include <asm/plat-s3c/nand.h> -#include <asm/plat-s3c24xx/common-smdk.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/common-smdk.h> +#include <plat/devs.h> +#include <plat/pm.h> /* LED devices */ diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 9c607bbc934..22a329513c0 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -42,18 +42,18 @@ #include <mach/system-reset.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-serial.h> - -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/s3c2400.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/s3c2412.h> +#include <plat/regs-serial.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s3c2400.h> +#include <plat/s3c2410.h> +#include <plat/s3c2412.h> #include "s3c244x.h" -#include <asm/plat-s3c24xx/s3c2440.h> -#include <asm/plat-s3c24xx/s3c2442.h> -#include <asm/plat-s3c24xx/s3c2443.h> +#include <plat/s3c2440.h> +#include <plat/s3c2442.h> +#include <plat/s3c2443.h> struct cpu_table { unsigned long idcode; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 6b13b5455df..e93f8bf6d33 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -28,11 +28,11 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <asm/plat-s3c24xx/udc.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/devs.h> +#include <plat/cpu.h> #include <asm/plat-s3c24xx/regs-spi.h> /* Serial port registrations */ diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index d6344461a83..1baf941d193 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -36,7 +36,7 @@ #include <asm/mach/dma.h> #include <mach/map.h> -#include <asm/plat-s3c24xx/dma.h> +#include <plat/dma.h> /* io map for dma */ static void __iomem *dma_base; diff --git a/arch/arm/plat-s3c24xx/include/plat/clock.h b/arch/arm/plat-s3c24xx/include/plat/clock.h new file mode 100644 index 00000000000..235b753cd87 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/clock.h @@ -0,0 +1,64 @@ +/* linux/include/asm-arm/plat-s3c24xx/clock.h + * linux/arch/arm/mach-s3c2410/clock.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Written by Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct clk { + struct list_head list; + struct module *owner; + struct clk *parent; + const char *name; + int id; + int usage; + unsigned long rate; + unsigned long ctrlbit; + + int (*enable)(struct clk *, int enable); + int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*get_rate)(struct clk *c); + unsigned long (*round_rate)(struct clk *c, unsigned long rate); + int (*set_parent)(struct clk *c, struct clk *parent); +}; + +/* other clocks which may be registered by board support */ + +extern struct clk s3c24xx_dclk0; +extern struct clk s3c24xx_dclk1; +extern struct clk s3c24xx_clkout0; +extern struct clk s3c24xx_clkout1; +extern struct clk s3c24xx_uclk; + +extern struct clk clk_usb_bus; + +/* core clock support */ + +extern struct clk clk_f; +extern struct clk clk_h; +extern struct clk clk_p; +extern struct clk clk_mpll; +extern struct clk clk_upll; +extern struct clk clk_xtal; + +/* exports for arch/arm/mach-s3c2410 + * + * Please DO NOT use these outside of arch/arm/mach-s3c2410 +*/ + +extern struct mutex clocks_mutex; + +extern int s3c2410_clkcon_enable(struct clk *clk, int enable); + +extern int s3c24xx_register_clock(struct clk *clk); +extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); + +extern int s3c24xx_setup_clocks(unsigned long xtal, + unsigned long fclk, + unsigned long hclk, + unsigned long pclk); diff --git a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h b/arch/arm/plat-s3c24xx/include/plat/common-smdk.h new file mode 100644 index 00000000000..58d9094c935 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/common-smdk.h @@ -0,0 +1,15 @@ +/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Common code for SMDK2410 and SMDK2440 boards + * + * http://www.fluff.org/ben/smdk2440/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void smdk_machine_init(void); diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c24xx/include/plat/cpu.h new file mode 100644 index 00000000000..23e420e8bd5 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/cpu.h @@ -0,0 +1,54 @@ +/* linux/include/asm-arm/plat-s3c24xx/cpu.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for S3C24XX CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* todo - fix when rmk changes iodescs to use `void __iomem *` */ + +#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } + +#ifndef MHZ +#define MHZ (1000*1000) +#endif + +#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000) + +/* forward declaration */ +struct s3c24xx_uart_resources; +struct platform_device; +struct s3c2410_uartcfg; +struct map_desc; + +/* core initialisation functions */ + +extern void s3c24xx_init_irq(void); + +extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); + +extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c24xx_init_clocks(int xtal); + +extern void s3c24xx_init_uartdevs(char *name, + struct s3c24xx_uart_resources *res, + struct s3c2410_uartcfg *cfg, int no); + +/* timer for 2410/2440 */ + +struct sys_timer; +extern struct sys_timer s3c24xx_timer; + +/* system device classes */ + +extern struct sysdev_class s3c2410_sysclass; +extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2440_sysclass; +extern struct sysdev_class s3c2442_sysclass; +extern struct sysdev_class s3c2443_sysclass; diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c24xx/include/plat/devs.h new file mode 100644 index 00000000000..badaac9d64a --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/devs.h @@ -0,0 +1,49 @@ +/* linux/include/asm-arm/plat-s3c24xx/devs.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2410 standard platform devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ +#include <linux/platform_device.h> + +struct s3c24xx_uart_resources { + struct resource *resources; + unsigned long nr_resources; +}; + +extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; + +extern struct platform_device *s3c24xx_uart_devs[]; +extern struct platform_device *s3c24xx_uart_src[]; + +extern struct platform_device s3c_device_timer[]; + +extern struct platform_device s3c_device_usb; +extern struct platform_device s3c_device_lcd; +extern struct platform_device s3c_device_wdt; +extern struct platform_device s3c_device_i2c; +extern struct platform_device s3c_device_iis; +extern struct platform_device s3c_device_rtc; +extern struct platform_device s3c_device_adc; +extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hsmmc; + +extern struct platform_device s3c_device_spi0; +extern struct platform_device s3c_device_spi1; + +extern struct platform_device s3c_device_nand; + +extern struct platform_device s3c_device_usbgadget; + +/* s3c2440 specific devices */ + +#ifdef CONFIG_CPU_S3C2440 + +extern struct platform_device s3c_device_camif; + +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma.h new file mode 100644 index 00000000000..c78efe316fc --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/dma.h @@ -0,0 +1,82 @@ +/* linux/include/asm-arm/plat-s3c24xx/dma.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct sysdev_class dma_sysclass; +extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; + +#define DMA_CH_VALID (1<<31) +#define DMA_CH_NEVER (1<<30) + +struct s3c24xx_dma_addr { + unsigned long from; + unsigned long to; +}; + +/* struct s3c24xx_dma_map + * + * this holds the mapping information for the channel selected + * to be connected to the specified device +*/ + +struct s3c24xx_dma_map { + const char *name; + struct s3c24xx_dma_addr hw_addr; + + unsigned long channels[S3C2410_DMA_CHANNELS]; + unsigned long channels_rx[S3C2410_DMA_CHANNELS]; +}; + +struct s3c24xx_dma_selection { + struct s3c24xx_dma_map *map; + unsigned long map_size; + unsigned long dcon_mask; + + void (*select)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map); + + void (*direction)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map, + enum s3c2410_dmasrc dir); +}; + +extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); + +/* struct s3c24xx_dma_order_ch + * + * channel map for one of the `enum dma_ch` dma channels. the list + * entry contains a set of low-level channel numbers, orred with + * DMA_CH_VALID, which are checked in the order in the array. +*/ + +struct s3c24xx_dma_order_ch { + unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */ + unsigned int flags; /* flags */ +}; + +/* struct s3c24xx_dma_order + * + * information provided by either the core or the board to give the + * dma system a hint on how to allocate channels +*/ + +struct s3c24xx_dma_order { + struct s3c24xx_dma_order_ch channels[DMACH_MAX]; +}; + +extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map); + +/* DMA init code, called from the cpu support code */ + +extern int s3c2410_dma_init(void); + +extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq, + unsigned int stride); diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h new file mode 100644 index 00000000000..45746a99534 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/irq.h @@ -0,0 +1,109 @@ +/* linux/include/asm-arm/plat-s3c24xx/irq.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for S3C24XX CPU IRQ support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define irqdbf(x...) +#define irqdbf2(x...) + +#define EXTINT_OFF (IRQ_EINT4 - 4) + +/* these are exported for arch/arm/mach-* usage */ +extern struct irq_chip s3c_irq_level_chip; +extern struct irq_chip s3c_irq_chip; + +static inline void +s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, + int subcheck) +{ + unsigned long mask; + unsigned long submask; + + submask = __raw_readl(S3C2410_INTSUBMSK); + mask = __raw_readl(S3C2410_INTMSK); + + submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); + + /* check to see if we need to mask the parent IRQ */ + + if ((submask & subcheck) == subcheck) { + __raw_writel(mask | parentbit, S3C2410_INTMSK); + } + + /* write back masks */ + __raw_writel(submask, S3C2410_INTSUBMSK); + +} + +static inline void +s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) +{ + unsigned long mask; + unsigned long submask; + + submask = __raw_readl(S3C2410_INTSUBMSK); + mask = __raw_readl(S3C2410_INTMSK); + + submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); + mask &= ~parentbit; + + /* write back masks */ + __raw_writel(submask, S3C2410_INTSUBMSK); + __raw_writel(mask, S3C2410_INTMSK); +} + + +static inline void +s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) +{ + unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); + + s3c_irqsub_mask(irqno, parentmask, group); + + __raw_writel(bit, S3C2410_SUBSRCPND); + + /* only ack parent if we've got all the irqs (seems we must + * ack, all and hope that the irq system retriggers ok when + * the interrupt goes off again) + */ + + if (1) { + __raw_writel(parentmask, S3C2410_SRCPND); + __raw_writel(parentmask, S3C2410_INTPND); + } +} + +static inline void +s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) +{ + unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); + + __raw_writel(bit, S3C2410_SUBSRCPND); + + /* only ack parent if we've got all the irqs (seems we must + * ack, all and hope that the irq system retriggers ok when + * the interrupt goes off again) + */ + + if (1) { + __raw_writel(parentmask, S3C2410_SRCPND); + __raw_writel(parentmask, S3C2410_INTPND); + } +} + +/* exported for use in arch/arm/mach-s3c2410 */ + +#ifdef CONFIG_PM +extern int s3c_irq_wake(unsigned int irqno, unsigned int state); +#else +#define s3c_irq_wake NULL +#endif + +extern int s3c_irqext_type(unsigned int irq, unsigned int type); diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h new file mode 100644 index 00000000000..cc623667e48 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/pm.h @@ -0,0 +1,73 @@ +/* linux/include/asm-arm/plat-s3c24xx/pm.h + * + * Copyright (c) 2004 Simtec Electronics + * Written by Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* s3c2410_pm_init + * + * called from board at initialisation time to setup the power + * management +*/ + +#ifdef CONFIG_PM + +extern __init int s3c2410_pm_init(void); + +#else + +static inline int s3c2410_pm_init(void) +{ + return 0; +} +#endif + +/* configuration for the IRQ mask over sleep */ +extern unsigned long s3c_irqwake_intmask; +extern unsigned long s3c_irqwake_eintmask; + +/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ +extern unsigned long s3c_irqwake_intallow; +extern unsigned long s3c_irqwake_eintallow; + +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + +/* Flags for PM Control */ + +extern unsigned long s3c_pm_flags; + +/* from sleep.S */ + +extern int s3c2410_cpu_save(unsigned long *saveblk); +extern void s3c2410_cpu_suspend(void); +extern void s3c2410_cpu_resume(void); + +extern unsigned long s3c2410_sleep_save_phys; + +/* sleep save info */ + +struct sleep_save { + void __iomem *reg; + unsigned long val; +}; + +#define SAVE_ITEM(x) \ + { .reg = (x) } + +extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); +extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h new file mode 100644 index 00000000000..3a5a16821af --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h @@ -0,0 +1,31 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for S3C2400 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 09-Fev-2006 LCVR First version, based on s3c2410.h +*/ + +#ifdef CONFIG_CPU_S3C2400 + +extern int s3c2400_init(void); + +extern void s3c2400_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2400_init_clocks(int xtal); + +#else +#define s3c2400_init_clocks NULL +#define s3c2400_init_uarts NULL +#define s3c2400_map_io NULL +#define s3c2400_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h new file mode 100644 index 00000000000..3cd1ec677b3 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h @@ -0,0 +1,31 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2410 machine directory + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#ifdef CONFIG_CPU_S3C2410 + +extern int s3c2410_init(void); + +extern void s3c2410_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2410_init_clocks(int xtal); + +#else +#define s3c2410_init_clocks NULL +#define s3c2410_init_uarts NULL +#define s3c2410_map_io NULL +#define s3c2410_init NULL +#endif + +extern int s3c2410_baseclk_add(void); diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h new file mode 100644 index 00000000000..3ec97685e78 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h @@ -0,0 +1,29 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2412 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2412 + +extern int s3c2412_init(void); + +extern void s3c2412_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2412_init_clocks(int xtal); + +extern int s3c2412_baseclk_add(void); +#else +#define s3c2412_init_clocks NULL +#define s3c2412_init_uarts NULL +#define s3c2412_map_io NULL +#define s3c2412_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h new file mode 100644 index 00000000000..107853bf948 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h @@ -0,0 +1,17 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2440 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2440 +extern int s3c2440_init(void); +#else +#define s3c2440_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h new file mode 100644 index 00000000000..451a23a2092 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h @@ -0,0 +1,17 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2442 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2442 +extern int s3c2442_init(void); +#else +#define s3c2442_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h new file mode 100644 index 00000000000..11d83b5c84e --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h @@ -0,0 +1,32 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2443 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2443 + +struct s3c2410_uartcfg; + +extern int s3c2443_init(void); + +extern void s3c2443_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2443_init_clocks(int xtal); + +extern int s3c2443_baseclk_add(void); + +#else +#define s3c2443_init_clocks NULL +#define s3c2443_init_uarts NULL +#define s3c2443_map_io NULL +#define s3c2443_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 590fc5a3ab0..963f7a4f26f 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -65,9 +65,9 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> -#include <asm/plat-s3c24xx/irq.h> +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> /* wakeup irq control */ diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index 0a074d35890..21dfa74773d 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -33,7 +33,7 @@ #include <asm/mach-types.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/pm.h> #define COPYRIGHT ", (c) 2005 Simtec Electronics" diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index d3934b1119a..8efb57ad501 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -40,7 +40,7 @@ #include <asm/cacheflush.h> #include <mach/hardware.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> #include <mach/regs-mem.h> @@ -48,7 +48,7 @@ #include <asm/mach/time.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/pm.h> /* for external use */ diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c index 306cc9c6f9e..b8e854f1b1d 100644 --- a/arch/arm/plat-s3c24xx/pwm-clock.c +++ b/arch/arm/plat-s3c24xx/pwm-clock.c @@ -24,10 +24,10 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/cpu.h> -#include <asm/plat-s3c/regs-timer.h> +#include <plat/regs-timer.h> /* Each of the timers 0 through 5 go through the following * clock tree, with the inputs depending on the timers. diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index 7a92c938542..feb770f2e84 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -19,8 +19,8 @@ #include <linux/io.h> #include <linux/pwm.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c/regs-timer.h> +#include <plat/devs.h> +#include <plat/regs-timer.h> struct pwm_device { struct list_head list; diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c index 119647a5eaa..7c09773ff9f 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -41,8 +41,8 @@ #include <mach/regs-clock.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/cpu.h> static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) { diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c index 0601c5f3230..0902afd227c 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-irq.c +++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c @@ -34,9 +34,9 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> -#include <asm/plat-s3c24xx/irq.h> +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> /* camera irq */ diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 146863a69ae..c0344fac4a9 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -30,18 +30,18 @@ #include <asm/irq.h> #include <mach/regs-clock.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> -#include <asm/plat-s3c24xx/s3c2410.h> -#include <asm/plat-s3c24xx/s3c2440.h> +#include <plat/s3c2410.h> +#include <plat/s3c2440.h> #include "s3c244x.h" -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/devs.h> -#include <asm/plat-s3c24xx/cpu.h> -#include <asm/plat-s3c24xx/pm.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pm.h> static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 4981a08b6eb..76594b21280 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -32,7 +32,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-clock.h> #include <mach/regs-mem.h> -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not * reset the UART configuration, only enable if you really need this! diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c index 64bfa19ae95..c51916236ac 100644 --- a/arch/arm/plat-s3c24xx/time.c +++ b/arch/arm/plat-s3c24xx/time.c @@ -33,12 +33,12 @@ #include <asm/irq.h> #include <mach/map.h> -#include <asm/plat-s3c/regs-timer.h> +#include <plat/regs-timer.h> #include <mach/regs-irq.h> #include <asm/mach/time.h> -#include <asm/plat-s3c24xx/clock.h> -#include <asm/plat-s3c24xx/cpu.h> +#include <plat/clock.h> +#include <plat/cpu.h> static unsigned long timer_startval; static unsigned long timer_usec_ticks; |