diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/plat-s3c/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/gpio.c | 11 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/gpio-core.h | 30 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/pm-gpio.c | 380 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/gpiolib.c | 8 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/pm.c | 213 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/gpiolib.c | 10 | ||||
| -rw-r--r-- | arch/arm/plat-s3c64xx/pm.c | 11 |
8 files changed, 438 insertions, 226 deletions
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index aa995a49e56..bfc8f537db1 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -21,6 +21,7 @@ obj-y += gpio-config.o # PM support obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += pm-gpio.o obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o # devices diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c index d71dd6d9ce5..260fdc6ad68 100644 --- a/arch/arm/plat-s3c/gpio.c +++ b/arch/arm/plat-s3c/gpio.c @@ -16,7 +16,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <plat/gpio-core.h> +#include <mach/gpio-core.h> #ifdef CONFIG_S3C_GPIO_TRACK struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; @@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) if (!gc->get) gc->get = s3c_gpiolib_get; +#ifdef CONFIG_PM + if (chip->pm != NULL) { + if (!chip->pm->save || !chip->pm->resume) + printk(KERN_ERR "gpio: %s has missing PM functions\n", + gc->label); + } else + printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); +#endif + /* gpiochip_add() prints own failure message on error. */ ret = gpiochip_add(gc); if (ret >= 0) diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h index 2fc60a580ac..32af612767a 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-core.h +++ b/arch/arm/plat-s3c/include/plat/gpio-core.h @@ -20,6 +20,18 @@ * specific code. */ +struct s3c_gpio_chip; + +/** + * struct s3c_gpio_pm - power management (suspend/resume) information + * @save: Routine to save the state of the GPIO block + * @resume: Routine to resume the GPIO block. + */ +struct s3c_gpio_pm { + void (*save)(struct s3c_gpio_chip *chip); + void (*resume)(struct s3c_gpio_chip *chip); +}; + struct s3c_gpio_cfg; /** @@ -27,6 +39,7 @@ struct s3c_gpio_cfg; * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @config: special function and pull-resistor control information. + * @pm_save: Save information for suspend/resume support. * * This wrapper provides the necessary information for the Samsung * specific gpios being registered with gpiolib. @@ -34,7 +47,11 @@ struct s3c_gpio_cfg; struct s3c_gpio_chip { struct gpio_chip chip; struct s3c_gpio_cfg *config; + struct s3c_gpio_pm *pm; void __iomem *base; +#ifdef CONFIG_PM + u32 pm_save[4]; +#endif }; static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) @@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } #endif + +#ifdef CONFIG_PM +extern struct s3c_gpio_pm s3c_gpio_pm_1bit; +extern struct s3c_gpio_pm s3c_gpio_pm_2bit; +extern struct s3c_gpio_pm s3c_gpio_pm_4bit; +#define __gpio_pm(x) x +#else +#define s3c_gpio_pm_1bit NULL +#define s3c_gpio_pm_2bit NULL +#define s3c_gpio_pm_4bit NULL +#define __gpio_pm(x) NULL + +#endif /* CONFIG_PM */ diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c new file mode 100644 index 00000000000..cfd326a8b69 --- /dev/null +++ b/arch/arm/plat-s3c/pm-gpio.c @@ -0,0 +1,380 @@ + +/* linux/arch/arm/plat-s3c/pm-gpio.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO PM code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/sysdev.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/gpio-core.h> +#include <plat/pm.h> + +/* PM GPIO helpers */ + +#define OFFS_CON (0x00) +#define OFFS_DAT (0x04) +#define OFFS_UP (0x08) + +static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); +} + +static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon = __raw_readl(base + OFFS_CON); + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpcon = chip->pm_save[0]; + u32 gps_gpdat = chip->pm_save[1]; + u32 gpcon; + + /* GPACON only has one bit per control / data and no PULLUPs. + * GPACON[x] = 0 => Output, 1 => SFN */ + + /* first set all SFN bits to SFN */ + + gpcon = old_gpcon | gps_gpcon; + __raw_writel(gpcon, base + OFFS_CON); + + /* now set all the other bits */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + + S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_1bit = { + .save = s3c_gpio_pm_1bit_save, + .resume = s3c_gpio_pm_1bit_resume, +}; + +static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); + chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP); +} + +/* Test whether the given masked+shifted bits of an GPIO configuration + * are one of the SFN (special function) modes. */ + +static inline int is_sfn(unsigned long con) +{ + return con >= 2; +} + +/* Test if the given masked+shifted GPIO configuration is an input */ + +static inline int is_in(unsigned long con) +{ + return con == 0; +} + +/* Test if the given masked+shifted GPIO configuration is an output */ + +static inline int is_out(unsigned long con) +{ + return con == 1; +} + +/** + * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank + * @chip: The chip information to resume. + * + * Restore one of the GPIO banks that was saved during suspend. This is + * not as simple as once thought, due to the possibility of glitches + * from the order that the CON and DAT registers are set in. + * + * The three states the pin can be are {IN,OUT,SFN} which gives us 9 + * combinations of changes to check. Three of these, if the pin stays + * in the same configuration can be discounted. This leaves us with + * the following: + * + * { IN => OUT } Change DAT first + * { IN => SFN } Change CON first + * { OUT => SFN } Change CON first, so new data will not glitch + * { OUT => IN } Change CON first, so new data will not glitch + * { SFN => IN } Change CON first + * { SFN => OUT } Change DAT first, so new data will not glitch [1] + * + * We do not currently deal with the UP registers as these control + * weak resistors, so a small delay in change should not need to bring + * these into the calculations. + * + * [1] this assumes that writing to a pin DAT whilst in SFN will set the + * state for when it is next output. + */ +static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon = __raw_readl(base + OFFS_CON); + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpcon = chip->pm_save[0]; + u32 gps_gpdat = chip->pm_save[1]; + u32 gpcon, old, new, mask; + u32 change_mask = 0x0; + int nr; + + /* restore GPIO pull-up settings */ + __raw_writel(chip->pm_save[2], base + OFFS_UP); + + /* Create a change_mask of all the items that need to have + * their CON value changed before their DAT value, so that + * we minimise the work between the two settings. + */ + + for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) { + old = (old_gpcon & mask) >> nr; + new = (gps_gpcon & mask) >> nr; + + /* If there is no change, then skip */ + + if (old == new) + continue; + + /* If both are special function, then skip */ + + if (is_sfn(old) && is_sfn(new)) + continue; + + /* Change is IN => OUT, do not change now */ + + if (is_in(old) && is_out(new)) + continue; + + /* Change is SFN => OUT, do not change now */ + + if (is_sfn(old) && is_out(new)) + continue; + + /* We should now be at the case of IN=>SFN, + * OUT=>SFN, OUT=>IN, SFN=>IN. */ + + change_mask |= mask; + } + + + /* Write the new CON settings */ + + gpcon = old_gpcon & ~change_mask; + gpcon |= gps_gpcon & change_mask; + + __raw_writel(gpcon, base + OFFS_CON); + + /* Now change any items that require DAT,CON */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + + S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_2bit = { + .save = s3c_gpio_pm_2bit_save, + .resume = s3c_gpio_pm_2bit_resume, +}; + +#ifdef CONFIG_ARCH_S3C64XX +static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT); + chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP); + + if (chip->chip.ngpio > 8) + chip->pm_save[0] = __raw_readl(chip->base - 4); +} + +static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) +{ + u32 old, new, mask; + u32 change_mask = 0x0; + int nr; + + for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) { + old = (old_gpcon & mask) >> nr; + new = (gps_gpcon & mask) >> nr; + + /* If there is no change, then skip */ + + if (old == new) + continue; + + /* If both are special function, then skip */ + + if (is_sfn(old) && is_sfn(new)) + continue; + + /* Change is IN => OUT, do not change now */ + + if (is_in(old) && is_out(new)) + continue; + + /* Change is SFN => OUT, do not change now */ + + if (is_sfn(old) && is_out(new)) + continue; + + /* We should now be at the case of IN=>SFN, + * OUT=>SFN, OUT=>IN, SFN=>IN. */ + + change_mask |= mask; + } + + return change_mask; +} + +static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) +{ + void __iomem *con = chip->base + (index * 4); + u32 old_gpcon = __raw_readl(con); + u32 gps_gpcon = chip->pm_save[index + 1]; + u32 gpcon, mask; + + mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); + + gpcon = old_gpcon & ~mask; + gpcon |= gps_gpcon & mask; + + __raw_writel(gpcon, con); +} + +static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon[2]; + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpdat = chip->pm_save[2]; + + /* First, modify the CON settings */ + + old_gpcon[0] = 0; + old_gpcon[1] = __raw_readl(base + OFFS_CON); + + s3c_gpio_pm_4bit_con(chip, 0); + if (chip->chip.ngpio > 8) { + old_gpcon[0] = __raw_readl(base - 4); + s3c_gpio_pm_4bit_con(chip, -1); + } + + /* Now change the configurations that require DAT,CON */ + + __raw_writel(chip->pm_save[2], base + OFFS_DAT); + __raw_writel(chip->pm_save[1], base + OFFS_CON); + if (chip->chip.ngpio > 8) + __raw_writel(chip->pm_save[0], base - 4); + + __raw_writel(chip->pm_save[2], base + OFFS_DAT); + __raw_writel(chip->pm_save[3], base + OFFS_UP); + + if (chip->chip.ngpio > 8) { + S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon[0], old_gpcon[1], + __raw_readl(base - 4), + __raw_readl(base + OFFS_CON), + old_gpdat, gps_gpdat); + } else + S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon[1], + __raw_readl(base + OFFS_CON), + old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_4bit = { + .save = s3c_gpio_pm_4bit_save, + .resume = s3c_gpio_pm_4bit_resume, +}; +#endif /* CONFIG_ARCH_S3C64XX */ + +/** + * s3c_pm_save_gpio() - save gpio chip data for suspend + * @ourchip: The chip for suspend. + */ +static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) +{ + struct s3c_gpio_pm *pm = ourchip->pm; + + if (pm == NULL || pm->save == NULL) + S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); + else + pm->save(ourchip); +} + +/** + * s3c_pm_save_gpios() - Save the state of the GPIO banks. + * + * For all the GPIO banks, save the state of each one ready for going + * into a suspend mode. + */ +void s3c_pm_save_gpios(void) +{ + struct s3c_gpio_chip *ourchip; + unsigned int gpio_nr; + + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + ourchip = s3c_gpiolib_getchip(gpio_nr); + if (!ourchip) + continue; + + s3c_pm_save_gpio(ourchip); + + S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n", + ourchip->chip.label, + ourchip->pm_save[0], + ourchip->pm_save[1], + ourchip->pm_save[2], + ourchip->pm_save[3]); + + gpio_nr += ourchip->chip.ngpio; + gpio_nr += CONFIG_S3C_GPIO_SPACE; + } +} + +/** + * s3c_pm_resume_gpio() - restore gpio chip data after suspend + * @ourchip: The suspended chip. + */ +static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) +{ + struct s3c_gpio_pm *pm = ourchip->pm; + + if (pm == NULL || pm->resume == NULL) + S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); + else + pm->resume(ourchip); +} + +void s3c_pm_restore_gpios(void) +{ + struct s3c_gpio_chip *ourchip; + unsigned int gpio_nr; + + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + ourchip = s3c_gpiolib_getchip(gpio_nr); + if (!ourchip) + continue; + + s3c_pm_resume_gpio(ourchip); + + gpio_nr += ourchip->chip.ngpio; + gpio_nr += CONFIG_S3C_GPIO_SPACE; + } +} diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 5c0491bf738..4bac12dc073 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -22,6 +22,7 @@ #include <mach/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <plat/pm.h> #include <mach/regs-gpio.h> @@ -78,6 +79,7 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPA0), + .pm = __gpio_pm(&s3c_gpio_pm_1bit), .chip = { .base = S3C2410_GPA0, .owner = THIS_MODULE, @@ -89,6 +91,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, [1] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPB0), + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPB0, .owner = THIS_MODULE, @@ -98,6 +101,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, [2] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPC0), + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPC0, .owner = THIS_MODULE, @@ -107,6 +111,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, [3] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPD0), + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPD0, .owner = THIS_MODULE, @@ -116,6 +121,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, [4] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPE0), + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPE0, .label = "GPIOE", @@ -125,6 +131,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, [5] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPF0), + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPF0, .owner = THIS_MODULE, @@ -135,6 +142,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, [6] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPG0), + .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPG0, .owner = THIS_MODULE, diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 062a29339a9..5135c40a1b9 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -75,43 +75,10 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_CLKSLOW), }; -static struct gpio_sleep { - void __iomem *base; - unsigned int gpcon; - unsigned int gpdat; - unsigned int gpup; -} gpio_save[] = { - [0] = { - .base = S3C2410_GPACON, - }, - [1] = { - .base = S3C2410_GPBCON, - }, - [2] = { - .base = S3C2410_GPCCON, - }, - [3] = { - .base = S3C2410_GPDCON, - }, - [4] = { - .base = S3C2410_GPECON, - }, - [5] = { - .base = S3C2410_GPFCON, - }, - [6] = { - .base = S3C2410_GPGCON, - }, - [7] = { - .base = S3C2410_GPHCON, - }, -}; - static struct sleep_save misc_save[] = { SAVE_ITEM(S3C2410_DCLKCON), }; - /* s3c_pm_check_resume_pin * * check to see if the pin is configured correctly for sleep mode, and @@ -165,186 +132,6 @@ void s3c_pm_configure_extint(void) } } -/* offsets for CON/DAT/UP registers */ - -#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON) -#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON) -#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON) - -/* s3c_pm_save_gpios() - * - * Save the state of the GPIOs - */ - -void s3c_pm_save_gpios(void) -{ - struct gpio_sleep *gps = gpio_save; - unsigned int gpio; - - for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { - void __iomem *base = gps->base; - - gps->gpcon = __raw_readl(base + OFFS_CON); - gps->gpdat = __raw_readl(base + OFFS_DAT); - - if (gpio > 0) - gps->gpup = __raw_readl(base + OFFS_UP); - - } -} - -/* Test whether the given masked+shifted bits of an GPIO configuration - * are one of the SFN (special function) modes. */ - -static inline int is_sfn(unsigned long con) -{ - return (con == 2 || con == 3); -} - -/* Test if the given masked+shifted GPIO configuration is an input */ - -static inline int is_in(unsigned long con) -{ - return con == 0; -} - -/* Test if the given masked+shifted GPIO configuration is an output */ - -static inline int is_out(unsigned long con) -{ - return con == 1; -} - -/** - * s3c2410_pm_restore_gpio() - restore the given GPIO bank - * @index: The number of the GPIO bank being resumed. - * @gps: The sleep confgiuration for the bank. - * - * Restore one of the GPIO banks that was saved during suspend. This is - * not as simple as once thought, due to the possibility of glitches - * from the order that the CON and DAT registers are set in. - * - * The three states the pin can be are {IN,OUT,SFN} which gives us 9 - * combinations of changes to check. Three of these, if the pin stays - * in the same configuration can be discounted. This leaves us with - * the following: - * - * { IN => OUT } Change DAT first - * { IN => SFN } Change CON first - * { OUT => SFN } Change CON first, so new data will not glitch - * { OUT => IN } Change CON first, so new data will not glitch - * { SFN => IN } Change CON first - * { SFN => OUT } Change DAT first, so new data will not glitch [1] - * - * We do not currently deal with the UP registers as these control - * weak resistors, so a small delay in change should not need to bring - * these into the calculations. - * - * [1] this assumes that writing to a pin DAT whilst in SFN will set the - * state for when it is next output. - */ - -static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) -{ - void __iomem *base = gps->base; - unsigned long gps_gpcon = gps->gpcon; - unsigned long gps_gpdat = gps->gpdat; - unsigned long old_gpcon; - unsigned long old_gpdat; - unsigned long old_gpup = 0x0; - unsigned long gpcon; - int nr; - - old_gpcon = __raw_readl(base + OFFS_CON); - old_gpdat = __raw_readl(base + OFFS_DAT); - - if (base == S3C2410_GPACON) { - /* GPACON only has one bit per control / data and no PULLUPs. - * GPACON[x] = 0 => Output, 1 => SFN */ - - /* first set all SFN bits to SFN */ - - gpcon = old_gpcon | gps->gpcon; - __raw_writel(gpcon, base + OFFS_CON); - - /* now set all the other bits */ - - __raw_writel(gps_gpdat, base + OFFS_DAT); - __raw_writel(gps_gpcon, base + OFFS_CON); - } else { - unsigned long old, new, mask; - unsigned long change_mask = 0x0; - - old_gpup = __raw_readl(base + OFFS_UP); - - /* Create a change_mask of all the items that need to have - * their CON value changed before their DAT value, so that - * we minimise the work between the two settings. - */ - - for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) { - old = (old_gpcon & mask) >> nr; - new = (gps_gpcon & mask) >> nr; - - /* If there is no change, then skip */ - - if (old == new) - continue; - - /* If both are special function, then skip */ - - if (is_sfn(old) && is_sfn(new)) - continue; - - /* Change is IN => OUT, do not change now */ - - if (is_in(old) && is_out(new)) - continue; - - /* Change is SFN => OUT, do not change now */ - - if (is_sfn(old) && is_out(new)) - continue; - - /* We should now be at the case of IN=>SFN, - * OUT=>SFN, OUT=>IN, SFN=>IN. */ - - change_mask |= mask; - } - - /* Write the new CON settings */ - - gpcon = old_gpcon & ~change_mask; - gpcon |= gps_gpcon & change_mask; - - __raw_writel(gpcon, base + OFFS_CON); - - /* Now change any items that require DAT,CON */ - - __raw_writel(gps_gpdat, base + OFFS_DAT); - __raw_writel(gps_gpcon, base + OFFS_CON); - __raw_writel(gps->gpup, base + OFFS_UP); - } - - S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", - index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); -} - - -/** s3c2410_pm_restore_gpios() - * - * Restore the state of the GPIOs - */ - -void s3c_pm_restore_gpios(void) -{ - struct gpio_sleep *gps = gpio_save; - int gpio; - - for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { - s3c2410_pm_restore_gpio(gpio, gps); - } -} void s3c_pm_restore_core(void) { diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index ee9188add8f..ccb82e85496 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip) { chip->chip.direction_input = s3c64xx_gpiolib_4bit_input; chip->chip.direction_output = s3c64xx_gpiolib_4bit_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); } static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) { chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input; chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) +{ + chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); } static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, @@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void) s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), s3c64xx_gpiolib_add_4bit2); - s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL); + s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), + s3c64xx_gpiolib_add_2bit); return 0; } diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c index 98190aa364a..07a6516a4f3 100644 --- a/arch/arm/plat-s3c64xx/pm.c +++ b/arch/arm/plat-s3c64xx/pm.c @@ -96,17 +96,6 @@ void s3c_pm_configure_extint(void) __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK); } -void s3c_pm_save_gpios(void) -{ - /* currently, unless the bootloader does something really stupid - * the gpio blocks should be maintained over their sleep. - */ -} - -void s3c_pm_restore_gpios(void) -{ -} - void s3c_pm_restore_core(void) { __raw_writel(0, S3C64XX_EINT_MASK); |