diff options
Diffstat (limited to 'arch/arm')
64 files changed, 2117 insertions, 868 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bf397a9f8ac..ee8a9ad7bbd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -67,10 +67,6 @@ config GENERIC_BUST_SPINLOCK config GENERIC_ISA_DMA bool -config GENERIC_IOMAP - bool - default y - config FIQ bool @@ -202,6 +198,11 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x +config ARCH_AAEC2000 + bool "Agilent AAEC-2000 based" + help + This enables support for systems based on the Agilent AAEC-2000 + endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -234,6 +235,8 @@ source "arch/arm/mach-h720x/Kconfig" source "arch/arm/mach-versatile/Kconfig" +source "arch/arm/mach-aaec2000/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -277,7 +280,7 @@ config ISA_DMA_API default y config PCI - bool "PCI support" if ARCH_INTEGRATOR_AP + bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -497,7 +500,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB) + depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) default y config CPU_FREQ_SA1110 @@ -689,7 +692,9 @@ source "drivers/block/Kconfig" source "drivers/acorn/block/Kconfig" -if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE +if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ + || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE source "drivers/ide/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2277e3d179c..8330495e244 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -97,6 +97,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_H720X) := h720x + machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 665bd2c2074..d3fe2533907 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -47,3 +47,10 @@ __XScale_start: orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) #endif +#ifdef CONFIG_ARCH_IXP2000 + mov r1, #-1 + mov r0, #0xd6000000 + str r1, [r0, #0x14] + str r1, [r0, #0x18] +#endif + diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c index a0507f8c33f..c6beb751f2a 100644 --- a/arch/arm/common/amba.c +++ b/arch/arm/common/amba.c @@ -169,7 +169,7 @@ static void amba_device_release(struct device *dev) } #define amba_attr(name,fmt,arg...) \ -static ssize_t show_##name(struct device *_dev, char *buf) \ +static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf) \ { \ struct amba_device *dev = to_amba_device(_dev); \ return sprintf(buf, fmt, arg); \ diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5797b1b100a..9d63a01214e 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -30,6 +30,8 @@ #include <linux/dmapool.h> #include <linux/list.h> +#include <asm/cacheflush.h> + #undef DEBUG #undef STATS @@ -302,12 +304,24 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, DO_STATS ( device_info->bounce_count++ ); - if ((dir == DMA_FROM_DEVICE) || - (dir == DMA_BIDIRECTIONAL)) { + if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { + unsigned long ptr; + dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", __func__, buf->safe, buf->ptr, size); memcpy(buf->ptr, buf->safe, size); + + /* + * DMA buffers must have the same cache properties + * as if they were really used for DMA - which means + * data must be written back to RAM. Note that + * we don't use dmac_flush_range() here for the + * bidirectional case because we know the cache + * lines will be coherent with the data written. + */ + ptr = (unsigned long)buf->ptr; + dmac_clean_range(ptr, ptr + size); } free_safe_buffer(device_info, buf); } diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index c2c557a224c..c94864c5b1a 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -22,7 +22,7 @@ * them early in the boot process, then pass them to the appropriate drivers. * Not all devices use all paramaters but the format is common to all. */ -#ifdef ARCH_SA1100 +#ifdef CONFIG_ARCH_SA1100 #define PARAM_BASE 0xe8ffc000 #else #define PARAM_BASE 0xa0000a00 diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 2b4059d2f8e..5d92af975d8 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sat Mar 26 21:32:26 2005 +# Linux kernel version: 2.6.12-rc6-git3 +# Thu Jun 9 19:00:50 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -34,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -122,6 +124,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9 # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -131,6 +134,7 @@ CONFIG_ISA=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y # CONFIG_LEDS is not set @@ -152,12 +156,14 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -294,7 +300,6 @@ CONFIG_PARPORT_NOT_PC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set @@ -428,7 +433,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -526,6 +530,7 @@ CONFIG_IRDA_ULTRA=y # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set CONFIG_SA1100_FIR=y +# CONFIG_VIA_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m # CONFIG_BT_SCO is not set @@ -618,7 +623,6 @@ CONFIG_NET_WIRELESS=y # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -687,7 +691,6 @@ CONFIG_RTC=m # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -736,6 +739,7 @@ CONFIG_I2C_ELEKTOR=m # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -747,6 +751,7 @@ CONFIG_I2C_ELEKTOR=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -871,7 +876,6 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set @@ -954,9 +958,11 @@ CONFIG_USB_USS720=m # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -985,6 +991,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index e8f9fccffe8..06fae4b6277 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index b4e297dd54b..b9de07de80f 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:02:26 2005 +# Linux kernel version: 2.6.12-rc4 +# Thu Jun 9 01:59:03 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -33,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -120,6 +123,7 @@ CONFIG_CPU_MINICACHE=y # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -138,6 +142,7 @@ CONFIG_PCMCIA_SA1100=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y # CONFIG_LEDS is not set @@ -159,12 +164,13 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -298,7 +304,6 @@ CONFIG_MTD_SA1100=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m @@ -379,7 +384,6 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -476,6 +480,7 @@ CONFIG_IRCOMM=m # CONFIG_SMC_IRCC_FIR is not set # CONFIG_ALI_FIR is not set CONFIG_SA1100_FIR=m +# CONFIG_VIA_FIR is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set @@ -647,7 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -676,9 +680,11 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index 6987c8c5ddb..fb41a36a5a6 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Mon Mar 28 00:22:34 2005 +# Linux kernel version: 2.6.12-rc6-git3 +# Thu Jun 9 20:58:58 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -34,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y CONFIG_CPU_CACHE_V4WB=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -119,6 +121,7 @@ CONFIG_CPU_MINICACHE=y # Bus support # CONFIG_ISA=y +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -128,6 +131,7 @@ CONFIG_ISA=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_DISCONTIGMEM=y CONFIG_LEDS=y @@ -151,12 +155,14 @@ CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_SA1100=y # # Floating point emulation @@ -280,7 +286,6 @@ CONFIG_MTD_CFI_UTIL=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set @@ -338,7 +343,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -484,7 +488,6 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -533,7 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index 4fd663ecbe3..810a450a55d 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 6f51c98084a..72e1b940e97 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index 7be3521f91f..1592e45f027 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index cd84a20f30f..f1afe3d09ec 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 4a2af55e134..3e1b0327e4d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -6,7 +6,7 @@ AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR) # Object file lists. -obj-y := arch.o compat.o dma.o entry-armv.o entry-common.o irq.o \ +obj-y := compat.o dma.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \ time.o traps.o diff --git a/arch/arm/kernel/arch.c b/arch/arm/kernel/arch.c deleted file mode 100644 index 4e02fbeb10a..00000000000 --- a/arch/arm/kernel/arch.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/arm/kernel/arch.c - * - * Architecture specific fixups. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/types.h> - -#include <asm/elf.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/mach/arch.h> - -unsigned int vram_size; - -#ifdef CONFIG_ARCH_ACORN - -unsigned int memc_ctrl_reg; -unsigned int number_mfm_drives; - -static int __init parse_tag_acorn(const struct tag *tag) -{ - memc_ctrl_reg = tag->u.acorn.memc_control_reg; - number_mfm_drives = tag->u.acorn.adfsdrives; - - switch (tag->u.acorn.vram_pages) { - case 512: - vram_size += PAGE_SIZE * 256; - case 256: - vram_size += PAGE_SIZE * 256; - default: - break; - } -#if 0 - if (vram_size) { - desc->video_start = 0x02000000; - desc->video_end = 0x02000000 + vram_size; - } -#endif - return 0; -} - -__tagtable(ATAG_ACORN, parse_tag_acorn); - -#endif diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 3dc15b131f5..6540db69133 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -866,19 +866,19 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) return ec; } -static ssize_t ecard_show_irq(struct device *dev, char *buf) +static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->irq); } -static ssize_t ecard_show_dma(struct device *dev, char *buf) +static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->dma); } -static ssize_t ecard_show_resources(struct device *dev, char *buf) +static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); char *str = buf; @@ -893,19 +893,19 @@ static ssize_t ecard_show_resources(struct device *dev, char *buf) return str - buf; } -static ssize_t ecard_show_vendor(struct device *dev, char *buf) +static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.manufacturer); } -static ssize_t ecard_show_device(struct device *dev, char *buf) +static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.product); } -static ssize_t ecard_show_type(struct device *dev, char *buf) +static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC"); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 4eb36155dc9..39a6c1b0b9a 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -24,48 +24,91 @@ #include "entry-header.S" /* + * Interrupt handling. Preserves r7, r8, r9 + */ + .macro irq_handler +1: get_irqnr_and_base r0, r6, r5, lr + movne r1, sp + @ + @ routine called with r0 = irq number, r1 = struct pt_regs * + @ + adrne lr, 1b + bne asm_do_IRQ + +#ifdef CONFIG_SMP + /* + * XXX + * + * this macro assumes that irqstat (r6) and base (r5) are + * preserved from get_irqnr_and_base above + */ + test_for_ipi r0, r6, r5, lr + movne r0, sp + adrne lr, 1b + bne do_IPI +#endif + + .endm + +/* * Invalid mode handlers */ - .macro inv_entry, sym, reason - sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go - stmia sp, {r0 - lr} @ Save XXX r0 - lr - ldr r4, .LC\sym + .macro inv_entry, reason + sub sp, sp, #S_FRAME_SIZE + stmib sp, {r1 - lr} mov r1, #\reason .endm __pabt_invalid: - inv_entry abt, BAD_PREFETCH - b 1f + inv_entry BAD_PREFETCH + b common_invalid __dabt_invalid: - inv_entry abt, BAD_DATA - b 1f + inv_entry BAD_DATA + b common_invalid __irq_invalid: - inv_entry irq, BAD_IRQ - b 1f + inv_entry BAD_IRQ + b common_invalid __und_invalid: - inv_entry und, BAD_UNDEFINSTR + inv_entry BAD_UNDEFINSTR + + @ + @ XXX fall through to common_invalid + @ + +@ +@ common_invalid - generic code for failed exception (re-entrant version of handlers) +@ +common_invalid: + zero_fp + + ldmia r0, {r4 - r6} + add r0, sp, #S_PC @ here for interlock avoidance + mov r7, #-1 @ "" "" "" "" + str r4, [sp] @ save preserved r0 + stmia r0, {r5 - r7} @ lr_<exception>, + @ cpsr_<exception>, "old_r0" -1: zero_fp - ldmia r4, {r5 - r7} @ Get XXX pc, cpsr, old_r0 - add r4, sp, #S_PC - stmia r4, {r5 - r7} @ Save XXX pc, cpsr, old_r0 mov r0, sp - and r2, r6, #31 @ int mode + and r2, r6, #0x1f b bad_mode /* * SVC mode handlers */ - .macro svc_entry, sym + .macro svc_entry sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ save r0 - r12 - ldr r2, .LC\sym - add r0, sp, #S_FRAME_SIZE - ldmia r2, {r2 - r4} @ get pc, cpsr - add r5, sp, #S_SP + stmib sp, {r1 - r12} + + ldmia r0, {r1 - r3} + add r5, sp, #S_SP @ here for interlock avoidance + mov r4, #-1 @ "" "" "" "" + add r0, sp, #S_FRAME_SIZE @ "" "" "" "" + str r1, [sp] @ save the "real" r0 copied + @ from the exception stack + mov r1, lr @ @@ -82,7 +125,7 @@ __und_invalid: .align 5 __dabt_svc: - svc_entry abt + svc_entry @ @ get ready to re-enable interrupts if appropriate @@ -129,28 +172,24 @@ __dabt_svc: .align 5 __irq_svc: - svc_entry irq + svc_entry + #ifdef CONFIG_PREEMPT - get_thread_info r8 - ldr r9, [r8, #TI_PREEMPT] @ get preempt count - add r7, r9, #1 @ increment it - str r7, [r8, #TI_PREEMPT] + get_thread_info tsk + ldr r8, [tsk, #TI_PREEMPT] @ get preempt count + add r7, r8, #1 @ increment it + str r7, [tsk, #TI_PREEMPT] #endif -1: get_irqnr_and_base r0, r6, r5, lr - movne r1, sp - @ - @ routine called with r0 = irq number, r1 = struct pt_regs * - @ - adrne lr, 1b - bne asm_do_IRQ + + irq_handler #ifdef CONFIG_PREEMPT - ldr r0, [r8, #TI_FLAGS] @ get flags + ldr r0, [tsk, #TI_FLAGS] @ get flags tst r0, #_TIF_NEED_RESCHED blne svc_preempt preempt_return: - ldr r0, [r8, #TI_PREEMPT] @ read preempt value + ldr r0, [tsk, #TI_PREEMPT] @ read preempt value + str r8, [tsk, #TI_PREEMPT] @ restore preempt count teq r0, r7 - str r9, [r8, #TI_PREEMPT] @ restore preempt count strne r0, [r0, -r0] @ bug() #endif ldr r0, [sp, #S_PSR] @ irqs are already disabled @@ -161,7 +200,7 @@ preempt_return: #ifdef CONFIG_PREEMPT svc_preempt: - teq r9, #0 @ was preempt count = 0 + teq r8, #0 @ was preempt count = 0 ldreq r6, .LCirq_stat movne pc, lr @ no ldr r0, [r6, #4] @ local_irq_count @@ -169,9 +208,9 @@ svc_preempt: adds r0, r0, r1 movne pc, lr mov r7, #0 @ preempt_schedule_irq - str r7, [r8, #TI_PREEMPT] @ expects preempt_count == 0 + str r7, [tsk, #TI_PREEMPT] @ expects preempt_count == 0 1: bl preempt_schedule_irq @ irq en/disable is done inside - ldr r0, [r8, #TI_FLAGS] @ get new tasks TI_FLAGS + ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS tst r0, #_TIF_NEED_RESCHED beq preempt_return @ go again b 1b @@ -179,7 +218,7 @@ svc_preempt: .align 5 __und_svc: - svc_entry und + svc_entry @ @ call emulation code, which returns using r9 if it has emulated @@ -209,7 +248,7 @@ __und_svc: .align 5 __pabt_svc: - svc_entry abt + svc_entry @ @ re-enable interrupts if appropriate @@ -242,12 +281,8 @@ __pabt_svc: ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr .align 5 -.LCirq: - .word __temp_irq -.LCund: - .word __temp_und -.LCabt: - .word __temp_abt +.LCcralign: + .word cr_alignment #ifdef MULTI_ABORT .LCprocfns: .word processor @@ -262,14 +297,18 @@ __pabt_svc: /* * User mode handlers */ - .macro usr_entry, sym - sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go - stmia sp, {r0 - r12} @ save r0 - r12 - ldr r7, .LC\sym - add r5, sp, #S_PC - ldmia r7, {r2 - r4} @ Get USR pc, cpsr - -#if __LINUX_ARM_ARCH__ < 6 + .macro usr_entry + sub sp, sp, #S_FRAME_SIZE + stmib sp, {r1 - r12} + + ldmia r0, {r1 - r3} + add r0, sp, #S_PC @ here for interlock avoidance + mov r4, #-1 @ "" "" "" "" + + str r1, [sp] @ save the "real" r0 copied + @ from the exception stack + +#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) @ make sure our user space atomic helper is aborted cmp r2, #VIRT_OFFSET bichs r3, r3, #PSR_Z_BIT @@ -284,13 +323,13 @@ __pabt_svc: @ @ Also, separately save sp_usr and lr_usr @ - stmia r5, {r2 - r4} - stmdb r5, {sp, lr}^ + stmia r0, {r2 - r4} + stmdb r0, {sp, lr}^ @ @ Enable the alignment trap while in kernel mode @ - alignment_trap r7, r0, __temp_\sym + alignment_trap r0 @ @ Clear FP to mark the first stack frame @@ -300,7 +339,7 @@ __pabt_svc: .align 5 __dabt_usr: - usr_entry abt + usr_entry @ @ Call the processor-specific abort handler: @@ -329,30 +368,23 @@ __dabt_usr: .align 5 __irq_usr: - usr_entry irq + usr_entry + get_thread_info tsk #ifdef CONFIG_PREEMPT - get_thread_info r8 - ldr r9, [r8, #TI_PREEMPT] @ get preempt count - add r7, r9, #1 @ increment it - str r7, [r8, #TI_PREEMPT] + ldr r8, [tsk, #TI_PREEMPT] @ get preempt count + add r7, r8, #1 @ increment it + str r7, [tsk, #TI_PREEMPT] #endif -1: get_irqnr_and_base r0, r6, r5, lr - movne r1, sp - adrne lr, 1b - @ - @ routine called with r0 = irq number, r1 = struct pt_regs * - @ - bne asm_do_IRQ + + irq_handler #ifdef CONFIG_PREEMPT - ldr r0, [r8, #TI_PREEMPT] + ldr r0, [tsk, #TI_PREEMPT] + str r8, [tsk, #TI_PREEMPT] teq r0, r7 - str r9, [r8, #TI_PREEMPT] strne r0, [r0, -r0] - mov tsk, r8 -#else - get_thread_info tsk #endif + mov why, #0 b ret_to_user @@ -360,7 +392,7 @@ __irq_usr: .align 5 __und_usr: - usr_entry und + usr_entry tst r3, #PSR_T_BIT @ Thumb mode? bne fpundefinstr @ ignore FP @@ -476,7 +508,7 @@ fpundefinstr: .align 5 __pabt_usr: - usr_entry abt + usr_entry enable_irq @ Enable interrupts mov r0, r2 @ address (pc) @@ -616,11 +648,17 @@ __kuser_helper_start: __kuser_cmpxchg: @ 0xffff0fc0 -#if __LINUX_ARM_ARCH__ < 6 +#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) -#ifdef CONFIG_SMP /* sanity check */ -#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?" -#endif + /* + * Poor you. No fast solution possible... + * The kernel itself must perform the operation. + * A special ghost syscall is used for that (see traps.c). + */ + swi #0x9ffff0 + mov pc, lr + +#elif __LINUX_ARM_ARCH__ < 6 /* * Theory of operation: @@ -735,29 +773,41 @@ __kuser_helper_end: * * Common stub entry macro: * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC + * + * SP points to a minimal amount of processor-private memory, the address + * of which is copied into r0 for the mode specific abort handler. */ - .macro vector_stub, name, sym, correction=0 + .macro vector_stub, name, correction=0 .align 5 vector_\name: - ldr r13, .LCs\sym .if \correction sub lr, lr, #\correction .endif - str lr, [r13] @ save lr_IRQ + + @ + @ Save r0, lr_<exception> (parent PC) and spsr_<exception> + @ (parent CPSR) + @ + stmia sp, {r0, lr} @ save r0, lr mrs lr, spsr - str lr, [r13, #4] @ save spsr_IRQ + str lr, [sp, #8] @ save spsr + @ - @ now branch to the relevant MODE handling routine + @ Prepare for SVC32 mode. IRQs remain disabled. @ - mrs r13, cpsr - bic r13, r13, #MODE_MASK - orr r13, r13, #SVC_MODE - msr spsr_cxsf, r13 @ switch to SVC_32 mode + mrs r0, cpsr + bic r0, r0, #MODE_MASK + orr r0, r0, #SVC_MODE + msr spsr_cxsf, r0 - and lr, lr, #15 + @ + @ the branch table must immediately follow this code + @ + mov r0, sp + and lr, lr, #0x0f ldr lr, [pc, lr, lsl #2] - movs pc, lr @ Changes mode and branches + movs pc, lr @ branch to handler in SVC mode .endm .globl __stubs_start @@ -765,7 +815,7 @@ __stubs_start: /* * Interrupt dispatcher */ - vector_stub irq, irq, 4 + vector_stub irq, 4 .long __irq_usr @ 0 (USR_26 / USR_32) .long __irq_invalid @ 1 (FIQ_26 / FIQ_32) @@ -788,7 +838,7 @@ __stubs_start: * Data abort dispatcher * Enter in ABT mode, spsr = USR CPSR, lr = USR PC */ - vector_stub dabt, abt, 8 + vector_stub dabt, 8 .long __dabt_usr @ 0 (USR_26 / USR_32) .long __dabt_invalid @ 1 (FIQ_26 / FIQ_32) @@ -811,7 +861,7 @@ __stubs_start: * Prefetch abort dispatcher * Enter in ABT mode, spsr = USR CPSR, lr = USR PC */ - vector_stub pabt, abt, 4 + vector_stub pabt, 4 .long __pabt_usr @ 0 (USR_26 / USR_32) .long __pabt_invalid @ 1 (FIQ_26 / FIQ_32) @@ -834,7 +884,7 @@ __stubs_start: * Undef instr entry dispatcher * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC */ - vector_stub und, und + vector_stub und .long __und_usr @ 0 (USR_26 / USR_32) .long __und_invalid @ 1 (FIQ_26 / FIQ_32) @@ -888,13 +938,6 @@ vector_addrexcptn: .LCvswi: .word vector_swi -.LCsirq: - .word __temp_irq -.LCsund: - .word __temp_und -.LCsabt: - .word __temp_abt - .globl __stubs_end __stubs_end: @@ -916,23 +959,6 @@ __vectors_end: .data -/* - * Do not reorder these, and do not insert extra data between... - */ - -__temp_irq: - .word 0 @ saved lr_irq - .word 0 @ saved spsr_irq - .word -1 @ old_r0 -__temp_und: - .word 0 @ Saved lr_und - .word 0 @ Saved spsr_und - .word -1 @ old_r0 -__temp_abt: - .word 0 @ Saved lr_abt - .word 0 @ Saved spsr_abt - .word -1 @ old_r0 - .globl cr_alignment .globl cr_no_alignment cr_alignment: diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index a3d40a0e2b0..afef2127396 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -59,11 +59,10 @@ mov \rd, \rd, lsl #13 .endm - .macro alignment_trap, rbase, rtemp, sym + .macro alignment_trap, rtemp #ifdef CONFIG_ALIGNMENT_TRAP -#define OFF_CR_ALIGNMENT(x) cr_alignment - x - - ldr \rtemp, [\rbase, #OFF_CR_ALIGNMENT(\sym)] + ldr \rtemp, .LCcralign + ldr \rtemp, [\rtemp] mcr p15, 0, \rtemp, c1, c0 #endif .endm diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4733877296d..bd4823c7464 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -2,6 +2,8 @@ * linux/arch/arm/kernel/head.S * * Copyright (C) 1994-2002 Russell King + * Copyright (c) 2003 ARM Limited + * All Rights Reserved * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -165,6 +167,48 @@ __mmap_switched: stmia r6, {r0, r4} @ Save control register values b start_kernel +#if defined(CONFIG_SMP) + .type secondary_startup, #function +ENTRY(secondary_startup) + /* + * Common entry point for secondary CPUs. + * + * Ensure that we're in SVC mode, and IRQs are disabled. Lookup + * the processor type - there is no need to check the machine type + * as it has already been validated by the primary processor. + */ + msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC + bl __lookup_processor_type + movs r10, r5 @ invalid processor? + moveq r0, #'p' @ yes, error 'p' + beq __error + + /* + * Use the page tables supplied from __cpu_up. + */ + adr r4, __secondary_data + ldmia r4, {r5, r6, r13} @ address to jump to after + sub r4, r4, r5 @ mmu has been enabled + ldr r4, [r6, r4] @ get secondary_data.pgdir + adr lr, __enable_mmu @ return address + add pc, r10, #12 @ initialise processor + @ (return control reg) + + /* + * r6 = &secondary_data + */ +ENTRY(__secondary_switched) + ldr sp, [r6, #4] @ get secondary_data.stack + mov fp, #0 + b secondary_start_kernel + + .type __secondary_data, %object +__secondary_data: + .long . + .long secondary_data + .long __secondary_switched +#endif /* defined(CONFIG_SMP) */ + /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c2a7da3ac0f..9fed5fa194d 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -92,6 +92,14 @@ struct cpu_user_fns cpu_user; struct cpu_cache_fns cpu_cache; #endif +struct stack { + u32 irq[3]; + u32 abt[3]; + u32 und[3]; +} ____cacheline_aligned; + +static struct stack stacks[NR_CPUS]; + char elf_platform[ELF_PLATFORM_SIZE]; EXPORT_SYMBOL(elf_platform); @@ -307,8 +315,6 @@ static void __init setup_processor(void) cpu_name, processor_id, (int)processor_id & 15, proc_arch[cpu_architecture()]); - dump_cpu_info(smp_processor_id()); - sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS); sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); elf_hwcap = list->elf_hwcap; @@ -316,6 +322,46 @@ static void __init setup_processor(void) cpu_proc_init(); } +/* + * cpu_init - initialise one CPU. + * + * cpu_init dumps the cache information, initialises SMP specific + * information, and sets up the per-CPU stacks. + */ +void cpu_init(void) +{ + unsigned int cpu = smp_processor_id(); + struct stack *stk = &stacks[cpu]; + + if (cpu >= NR_CPUS) { + printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu); + BUG(); + } + + dump_cpu_info(cpu); + + /* + * setup stacks for re-entrant exception handlers + */ + __asm__ ( + "msr cpsr_c, %1\n\t" + "add sp, %0, %2\n\t" + "msr cpsr_c, %3\n\t" + "add sp, %0, %4\n\t" + "msr cpsr_c, %5\n\t" + "add sp, %0, %6\n\t" + "msr cpsr_c, %7" + : + : "r" (stk), + "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE), + "I" (offsetof(struct stack, irq[0])), + "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE), + "I" (offsetof(struct stack, abt[0])), + "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE), + "I" (offsetof(struct stack, und[0])), + "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)); +} + static struct machine_desc * __init setup_machine(unsigned int nr) { struct machine_desc *list; @@ -715,6 +761,8 @@ void __init setup_arch(char **cmdline_p) paging_init(&meminfo, mdesc); request_standard_resources(&meminfo, mdesc); + cpu_init(); + /* * Set up various architecture-specific pointers */ diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index ecc8c333240..34892758f09 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -24,6 +24,9 @@ #include <asm/atomic.h> #include <asm/cacheflush.h> #include <asm/cpu.h> +#include <asm/mmu_context.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> #include <asm/processor.h> #include <asm/tlbflush.h> #include <asm/ptrace.h> @@ -37,6 +40,13 @@ cpumask_t cpu_present_mask; cpumask_t cpu_online_map; /* + * as from 2.5, kernels no longer have an init_tasks structure + * so we need some other way of telling a new secondary core + * where to place its SVC stack + */ +struct secondary_data secondary_data; + +/* * structures for inter-processor calls * - A collection of single bit ipi messages. */ @@ -71,6 +81,8 @@ static DEFINE_SPINLOCK(smp_call_function_lock); int __init __cpu_up(unsigned int cpu) { struct task_struct *idle; + pgd_t *pgd; + pmd_t *pmd; int ret; /* @@ -84,11 +96,57 @@ int __init __cpu_up(unsigned int cpu) } /* + * Allocate initial page tables to allow the new CPU to + * enable the MMU safely. This essentially means a set + * of our "standard" page tables, with the addition of + * a 1:1 mapping for the physical address of the kernel. + */ + pgd = pgd_alloc(&init_mm); + pmd = pmd_offset(pgd, PHYS_OFFSET); + *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) | + PMD_TYPE_SECT | PMD_SECT_AP_WRITE); + + /* + * We need to tell the secondary core where to find + * its stack and the page tables. + */ + secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8; + secondary_data.pgdir = virt_to_phys(pgd); + wmb(); + + /* * Now bring the CPU into our world. */ ret = boot_secondary(cpu, idle); + if (ret == 0) { + unsigned long timeout; + + /* + * CPU was successfully started, wait for it + * to come online or time out. + */ + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) { + if (cpu_online(cpu)) + break; + + udelay(10); + barrier(); + } + + if (!cpu_online(cpu)) + ret = -EIO; + } + + secondary_data.stack = 0; + secondary_data.pgdir = 0; + + *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0); + pgd_free(pgd); + if (ret) { - printk(KERN_CRIT "cpu_up: processor %d failed to boot\n", cpu); + printk(KERN_CRIT "CPU%u: processor failed to boot\n", cpu); + /* * FIXME: We need to clean up the new idle thread. --rmk */ @@ -98,6 +156,56 @@ int __init __cpu_up(unsigned int cpu) } /* + * This is the secondary CPU boot entry. We're using this CPUs + * idle thread stack, but a set of temporary page tables. + */ +asmlinkage void __init secondary_start_kernel(void) +{ + struct mm_struct *mm = &init_mm; + unsigned int cpu = smp_processor_id(); + + printk("CPU%u: Booted secondary processor\n", cpu); + + /* + * All kernel threads share the same mm context; grab a + * reference and switch to it. + */ + atomic_inc(&mm->mm_users); + atomic_inc(&mm->mm_count); + current->active_mm = mm; + cpu_set(cpu, mm->cpu_vm_mask); + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + + cpu_init(); + + /* + * Give the platform a chance to do its own initialisation. + */ + platform_secondary_init(cpu); + + /* + * Enable local interrupts. + */ + local_irq_enable(); + local_fiq_enable(); + + calibrate_delay(); + + smp_store_cpu_info(cpu); + + /* + * OK, now it's safe to let the boot CPU continue + */ + cpu_set(cpu, cpu_online_map); + + /* + * OK, it's off to the idle thread for us + */ + cpu_idle(); +} + +/* * Called by both boot and secondaries to move global data into * per-processor storage. */ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 14df16b983f..45d2a032d89 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -464,6 +464,55 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) #endif return 0; +#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG + /* + * Atomically store r1 in *r2 if *r2 is equal to r0 for user space. + * Return zero in r0 if *MEM was changed or non-zero if no exchange + * happened. Also set the user C flag accordingly. + * If access permissions have to be fixed up then non-zero is + * returned and the operation has to be re-attempted. + * + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ + case 0xfff0: + { + extern void do_DataAbort(unsigned long addr, unsigned int fsr, + struct pt_regs *regs); + unsigned long val; + unsigned long addr = regs->ARM_r2; + struct mm_struct *mm = current->mm; + pgd_t *pgd; pmd_t *pmd; pte_t *pte; + + regs->ARM_cpsr &= ~PSR_C_BIT; + spin_lock(&mm->page_table_lock); + pgd = pgd_offset(mm, addr); + if (!pgd_present(*pgd)) + goto bad_access; + pmd = pmd_offset(pgd, addr); + if (!pmd_present(*pmd)) + goto bad_access; + pte = pte_offset_map(pmd, addr); + if (!pte_present(*pte) || !pte_write(*pte)) + goto bad_access; + val = *(unsigned long *)addr; + val -= regs->ARM_r0; + if (val == 0) { + *(unsigned long *)addr = regs->ARM_r1; + regs->ARM_cpsr |= PSR_C_BIT; + } + spin_unlock(&mm->page_table_lock); + return val; + + bad_access: + spin_unlock(&mm->page_table_lock); + /* simulate a read access fault */ + do_DataAbort(addr, 15 + (1 << 11), regs); + return -1; + } +#endif + default: /* Calls 9f00xx..9f07ff are defined to return -ENOSYS if not implemented, rather than raising SIGILL. This diff --git a/arch/arm/lib/ashldi3.c b/arch/arm/lib/ashldi3.c index 130f5a83966..b62875cfd8f 100644 --- a/arch/arm/lib/ashldi3.c +++ b/arch/arm/lib/ashldi3.c @@ -31,31 +31,26 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__ashldi3 (DItype u, word_type b) +s64 __ashldi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - w.s.low = 0; - w.s.high = (USItype)uu.s.low << -bm; - } - else - { - USItype carries = (USItype)uu.s.low >> bm; - w.s.low = (USItype)uu.s.low << b; - w.s.high = ((USItype)uu.s.high << b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + w.s.low = 0; + w.s.high = (u32) uu.s.low << -bm; + } else { + u32 carries = (u32) uu.s.low >> bm; + w.s.low = (u32) uu.s.low << b; + w.s.high = ((u32) uu.s.high << b) | carries; + } + + return w.ll; } - diff --git a/arch/arm/lib/ashrdi3.c b/arch/arm/lib/ashrdi3.c index 71625d218f8..9a8600a7543 100644 --- a/arch/arm/lib/ashrdi3.c +++ b/arch/arm/lib/ashrdi3.c @@ -31,31 +31,27 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__ashrdi3 (DItype u, word_type b) +s64 __ashrdi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - /* w.s.high = 1..1 or 0..0 */ - w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1); - w.s.low = uu.s.high >> -bm; - } - else - { - USItype carries = (USItype)uu.s.high << bm; - w.s.high = uu.s.high >> b; - w.s.low = ((USItype)uu.s.low >> b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + /* w.s.high = 1..1 or 0..0 */ + w.s.high = uu.s.high >> (sizeof(s32) * BITS_PER_UNIT - 1); + w.s.low = uu.s.high >> -bm; + } else { + u32 carries = (u32) uu.s.high << bm; + w.s.high = uu.s.high >> b; + w.s.low = ((u32) uu.s.low >> b) | carries; + } + + return w.ll; } diff --git a/arch/arm/lib/gcclib.h b/arch/arm/lib/gcclib.h index 65314a3d9e2..8b6dcc656de 100644 --- a/arch/arm/lib/gcclib.h +++ b/arch/arm/lib/gcclib.h @@ -1,25 +1,22 @@ /* gcclib.h -- definitions for various functions 'borrowed' from gcc-2.95.3 */ /* I Molton 29/07/01 */ -#define BITS_PER_UNIT 8 -#define SI_TYPE_SIZE (sizeof (SItype) * BITS_PER_UNIT) +#include <linux/types.h> -typedef unsigned int UQItype __attribute__ ((mode (QI))); -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); -typedef unsigned int UDItype __attribute__ ((mode (DI))); +#define BITS_PER_UNIT 8 +#define SI_TYPE_SIZE (sizeof(s32) * BITS_PER_UNIT) #ifdef __ARMEB__ - struct DIstruct {SItype high, low;}; +struct DIstruct { + s32 high, low; +}; #else - struct DIstruct {SItype low, high;}; +struct DIstruct { + s32 low, high; +}; #endif -typedef union -{ - struct DIstruct s; - DItype ll; +typedef union { + struct DIstruct s; + s64 ll; } DIunion; - diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index 6d1d7c27806..5e240e452af 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -87,9 +87,9 @@ ENTRY(__raw_writesw) subs r2, r2, #2 orr ip, ip, r3, push_hbyte1 strh ip, [r0] - bpl 2b + bpl 1b -3: tst r2, #1 -2: movne ip, r3, lsr #8 + tst r2, #1 +3: movne ip, r3, lsr #8 strneh ip, [r0] mov pc, lr diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h index 179eea4edc3..90ae647e4d7 100644 --- a/arch/arm/lib/longlong.h +++ b/arch/arm/lib/longlong.h @@ -26,18 +26,18 @@ #define __BITS4 (SI_TYPE_SIZE / 4) #define __ll_B (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((USItype) (t) % __ll_B) -#define __ll_highpart(t) ((USItype) (t) / __ll_B) +#define __ll_lowpart(t) ((u32) (t) % __ll_B) +#define __ll_highpart(t) ((u32) (t) / __ll_B) /* Define auxiliary asm macros. 1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) - multiplies two USItype integers MULTIPLER and MULTIPLICAND, - and generates a two-part USItype product in HIGH_PROD and + multiplies two u32 integers MULTIPLER and MULTIPLICAND, + and generates a two-part u32 product in HIGH_PROD and LOW_PROD. - 2) __umulsidi3(a,b) multiplies two USItype integers A and B, - and returns a UDItype product. This is just a variant of umul_ppmm. + 2) __umulsidi3(a,b) multiplies two u32 integers A and B, + and returns a u64 product. This is just a variant of umul_ppmm. 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, denominator) divides a two-word unsigned integer, composed by the @@ -77,23 +77,23 @@ #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("adds %1, %4, %5 \n\ adc %0, %2, %3" \ - : "=r" ((USItype) (sh)), \ - "=&r" ((USItype) (sl)) \ - : "%r" ((USItype) (ah)), \ - "rI" ((USItype) (bh)), \ - "%r" ((USItype) (al)), \ - "rI" ((USItype) (bl))) + : "=r" ((u32) (sh)), \ + "=&r" ((u32) (sl)) \ + : "%r" ((u32) (ah)), \ + "rI" ((u32) (bh)), \ + "%r" ((u32) (al)), \ + "rI" ((u32) (bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("subs %1, %4, %5 \n\ sbc %0, %2, %3" \ - : "=r" ((USItype) (sh)), \ - "=&r" ((USItype) (sl)) \ - : "r" ((USItype) (ah)), \ - "rI" ((USItype) (bh)), \ - "r" ((USItype) (al)), \ - "rI" ((USItype) (bl))) + : "=r" ((u32) (sh)), \ + "=&r" ((u32) (sl)) \ + : "r" ((u32) (ah)), \ + "rI" ((u32) (bh)), \ + "r" ((u32) (al)), \ + "rI" ((u32) (bl))) #define umul_ppmm(xh, xl, a, b) \ -{register USItype __t0, __t1, __t2; \ +{register u32 __t0, __t1, __t2; \ __asm__ ("%@ Inlined umul_ppmm \n\ mov %2, %5, lsr #16 \n\ mov %0, %6, lsr #16 \n\ @@ -107,14 +107,14 @@ addcs %0, %0, #65536 \n\ adds %1, %1, %3, lsl #16 \n\ adc %0, %0, %3, lsr #16" \ - : "=&r" ((USItype) (xh)), \ - "=r" ((USItype) (xl)), \ + : "=&r" ((u32) (xh)), \ + "=r" ((u32) (xl)), \ "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((USItype) (a)), \ - "r" ((USItype) (b)));} + : "r" ((u32) (a)), \ + "r" ((u32) (b)));} #define UMUL_TIME 20 #define UDIV_TIME 100 -#endif /* __arm__ */ +#endif /* __arm__ */ #define __umulsidi3(u, v) \ ({DIunion __w; \ @@ -123,14 +123,14 @@ #define __udiv_qrnnd_c(q, r, n1, n0, d) \ do { \ - USItype __d1, __d0, __q1, __q0; \ - USItype __r1, __r0, __m; \ + u32 __d1, __d0, __q1, __q0; \ + u32 __r1, __r0, __m; \ __d1 = __ll_highpart (d); \ __d0 = __ll_lowpart (d); \ \ __r1 = (n1) % __d1; \ __q1 = (n1) / __d1; \ - __m = (USItype) __q1 * __d0; \ + __m = (u32) __q1 * __d0; \ __r1 = __r1 * __ll_B | __ll_highpart (n0); \ if (__r1 < __m) \ { \ @@ -143,7 +143,7 @@ \ __r0 = __r1 % __d1; \ __q0 = __r1 / __d1; \ - __m = (USItype) __q0 * __d0; \ + __m = (u32) __q0 * __d0; \ __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ if (__r0 < __m) \ { \ @@ -154,7 +154,7 @@ } \ __r0 -= __m; \ \ - (q) = (USItype) __q1 * __ll_B | __q0; \ + (q) = (u32) __q1 * __ll_B | __q0; \ (r) = __r0; \ } while (0) @@ -163,14 +163,14 @@ #define count_leading_zeros(count, x) \ do { \ - USItype __xr = (x); \ - USItype __a; \ + u32 __xr = (x); \ + u32 __a; \ \ if (SI_TYPE_SIZE <= 32) \ { \ - __a = __xr < ((USItype)1<<2*__BITS4) \ - ? (__xr < ((USItype)1<<__BITS4) ? 0 : __BITS4) \ - : (__xr < ((USItype)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ + __a = __xr < ((u32)1<<2*__BITS4) \ + ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4) \ + : (__xr < ((u32)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ } \ else \ { \ diff --git a/arch/arm/lib/lshrdi3.c b/arch/arm/lib/lshrdi3.c index b666f1bad45..3681f49d2b6 100644 --- a/arch/arm/lib/lshrdi3.c +++ b/arch/arm/lib/lshrdi3.c @@ -31,31 +31,26 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__lshrdi3 (DItype u, word_type b) +s64 __lshrdi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - w.s.high = 0; - w.s.low = (USItype)uu.s.high >> -bm; - } - else - { - USItype carries = (USItype)uu.s.high << bm; - w.s.high = (USItype)uu.s.high >> b; - w.s.low = ((USItype)uu.s.low >> b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + w.s.high = 0; + w.s.low = (u32) uu.s.high >> -bm; + } else { + u32 carries = (u32) uu.s.high << bm; + w.s.high = (u32) uu.s.high >> b; + w.s.low = ((u32) uu.s.low >> b) | carries; + } + + return w.ll; } - diff --git a/arch/arm/lib/muldi3.c b/arch/arm/lib/muldi3.c index 44d611b1cfd..0a3b93313f1 100644 --- a/arch/arm/lib/muldi3.c +++ b/arch/arm/lib/muldi3.c @@ -32,7 +32,7 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" #define umul_ppmm(xh, xl, a, b) \ -{register USItype __t0, __t1, __t2; \ +{register u32 __t0, __t1, __t2; \ __asm__ ("%@ Inlined umul_ppmm \n\ mov %2, %5, lsr #16 \n\ mov %0, %6, lsr #16 \n\ @@ -46,32 +46,27 @@ Boston, MA 02111-1307, USA. */ addcs %0, %0, #65536 \n\ adds %1, %1, %3, lsl #16 \n\ adc %0, %0, %3, lsr #16" \ - : "=&r" ((USItype) (xh)), \ - "=r" ((USItype) (xl)), \ + : "=&r" ((u32) (xh)), \ + "=r" ((u32) (xl)), \ "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((USItype) (a)), \ - "r" ((USItype) (b)));} - + : "r" ((u32) (a)), \ + "r" ((u32) (b)));} #define __umulsidi3(u, v) \ ({DIunion __w; \ umul_ppmm (__w.s.high, __w.s.low, u, v); \ __w.ll; }) - -DItype -__muldi3 (DItype u, DItype v) +s64 __muldi3(s64 u, s64 v) { - DIunion w; - DIunion uu, vv; + DIunion w; + DIunion uu, vv; - uu.ll = u, - vv.ll = v; + uu.ll = u, vv.ll = v; - w.ll = __umulsidi3 (uu.s.low, vv.s.low); - w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high - + (USItype) uu.s.high * (USItype) vv.s.low); + w.ll = __umulsidi3(uu.s.low, vv.s.low); + w.s.high += ((u32) uu.s.low * (u32) vv.s.high + + (u32) uu.s.high * (u32) vv.s.low); - return w.ll; + return w.ll; } - diff --git a/arch/arm/lib/ucmpdi2.c b/arch/arm/lib/ucmpdi2.c index 6c6ae63efa0..57f3f2df385 100644 --- a/arch/arm/lib/ucmpdi2.c +++ b/arch/arm/lib/ucmpdi2.c @@ -31,21 +31,19 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -word_type -__ucmpdi2 (DItype a, DItype b) +int __ucmpdi2(s64 a, s64 b) { - DIunion au, bu; - - au.ll = a, bu.ll = b; - - if ((USItype) au.s.high < (USItype) bu.s.high) - return 0; - else if ((USItype) au.s.high > (USItype) bu.s.high) - return 2; - if ((USItype) au.s.low < (USItype) bu.s.low) - return 0; - else if ((USItype) au.s.low > (USItype) bu.s.low) - return 2; - return 1; + DIunion au, bu; + + au.ll = a, bu.ll = b; + + if ((u32) au.s.high < (u32) bu.s.high) + return 0; + else if ((u32) au.s.high > (u32) bu.s.high) + return 2; + if ((u32) au.s.low < (u32) bu.s.low) + return 0; + else if ((u32) au.s.low > (u32) bu.s.low) + return 2; + return 1; } - diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c index d25195f673f..e343be4c664 100644 --- a/arch/arm/lib/udivdi3.c +++ b/arch/arm/lib/udivdi3.c @@ -32,211 +32,191 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" #include "longlong.h" -static const UQItype __clz_tab[] = -{ - 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5, - 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, +static const u8 __clz_tab[] = { + 0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 6, 6, 6, 6, 6, 6, 6, 6, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, + 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8, 8, 8, 8, 8, 8, 8, }; -UDItype -__udivmoddi4 (UDItype n, UDItype d, UDItype *rp) +u64 __udivmoddi4(u64 n, u64 d, u64 * rp) { - DIunion ww; - DIunion nn, dd; - DIunion rr; - USItype d0, d1, n0, n1, n2; - USItype q0, q1; - USItype b, bm; - - nn.ll = n; - dd.ll = d; - - d0 = dd.s.low; - d1 = dd.s.high; - n0 = nn.s.low; - n1 = nn.s.high; - - if (d1 == 0) - { - if (d0 > n1) - { - /* 0q = nn / 0D */ - - count_leading_zeros (bm, d0); - - if (bm != 0) - { - /* Normalize, i.e. make the most significant bit of the - denominator set. */ - - d0 = d0 << bm; - n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm)); - n0 = n0 << bm; - } - - udiv_qrnnd (q0, n0, n1, n0, d0); - q1 = 0; - - /* Remainder in n0 >> bm. */ - } - else - { - /* qq = NN / 0d */ - - if (d0 == 0) - d0 = 1 / d0; /* Divide intentionally by zero. */ - - count_leading_zeros (bm, d0); - - if (bm == 0) - { - /* From (n1 >= d0) /\ (the most significant bit of d0 is set), - conclude (the most significant bit of n1 is set) /\ (the - leading quotient digit q1 = 1). - - This special case is necessary, not an optimization. - (Shifts counts of SI_TYPE_SIZE are undefined.) */ - - n1 -= d0; - q1 = 1; - } - else - { - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd (q1, n1, n2, n1, d0); - } - - /* n1 != d0... */ - - udiv_qrnnd (q0, n0, n1, n0, d0); - - /* Remainder in n0 >> bm. */ - } - - if (rp != 0) - { - rr.s.low = n0 >> bm; - rr.s.high = 0; - *rp = rr.ll; - } - } - else - { - if (d1 > n1) - { - /* 00 = nn / DD */ - - q0 = 0; - q1 = 0; - - /* Remainder in n1n0. */ - if (rp != 0) - { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } - else - { - /* 0q = NN / dd */ - - count_leading_zeros (bm, d1); - if (bm == 0) - { - /* From (n1 >= d1) /\ (the most significant bit of d1 is set), - conclude (the most significant bit of n1 is set) /\ (the - quotient digit q0 = 0 or 1). - - This special case is necessary, not an optimization. */ - - /* The condition on the next line takes advantage of that - n1 >= d1 (true due to program flow). */ - if (n1 > d1 || n0 >= d0) - { - q0 = 1; - sub_ddmmss (n1, n0, n1, n0, d1, d0); - } - else - q0 = 0; - - q1 = 0; - - if (rp != 0) - { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } - else - { - USItype m1, m0; - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d1 = (d1 << bm) | (d0 >> b); - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd (q0, n1, n2, n1, d1); - umul_ppmm (m1, m0, q0, d0); - - if (m1 > n1 || (m1 == n1 && m0 > n0)) - { - q0--; - sub_ddmmss (m1, m0, m1, m0, d1, d0); - } - - q1 = 0; - - /* Remainder in (n1n0 - m1m0) >> bm. */ - if (rp != 0) - { - sub_ddmmss (n1, n0, n1, n0, m1, m0); - rr.s.low = (n1 << b) | (n0 >> bm); - rr.s.high = n1 >> bm; - *rp = rr.ll; - } - } - } - } - - ww.s.low = q0; - ww.s.high = q1; - return ww.ll; + DIunion ww; + DIunion nn, dd; + DIunion rr; + u32 d0, d1, n0, n1, n2; + u32 q0, q1; + u32 b, bm; + + nn.ll = n; + dd.ll = d; + + d0 = dd.s.low; + d1 = dd.s.high; + n0 = nn.s.low; + n1 = nn.s.high; + + if (d1 == 0) { + if (d0 > n1) { + /* 0q = nn / 0D */ + + count_leading_zeros(bm, d0); + + if (bm != 0) { + /* Normalize, i.e. make the most significant bit of the + denominator set. */ + + d0 = d0 << bm; + n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm)); + n0 = n0 << bm; + } + + udiv_qrnnd(q0, n0, n1, n0, d0); + q1 = 0; + + /* Remainder in n0 >> bm. */ + } else { + /* qq = NN / 0d */ + + if (d0 == 0) + d0 = 1 / d0; /* Divide intentionally by zero. */ + + count_leading_zeros(bm, d0); + + if (bm == 0) { + /* From (n1 >= d0) /\ (the most significant bit of d0 is set), + conclude (the most significant bit of n1 is set) /\ (the + leading quotient digit q1 = 1). + + This special case is necessary, not an optimization. + (Shifts counts of SI_TYPE_SIZE are undefined.) */ + + n1 -= d0; + q1 = 1; + } else { + /* Normalize. */ + + b = SI_TYPE_SIZE - bm; + + d0 = d0 << bm; + n2 = n1 >> b; + n1 = (n1 << bm) | (n0 >> b); + n0 = n0 << bm; + + udiv_qrnnd(q1, n1, n2, n1, d0); + } + + /* n1 != d0... */ + + udiv_qrnnd(q0, n0, n1, n0, d0); + + /* Remainder in n0 >> bm. */ + } + + if (rp != 0) { + rr.s.low = n0 >> bm; + rr.s.high = 0; + *rp = rr.ll; + } + } else { + if (d1 > n1) { + /* 00 = nn / DD */ + + q0 = 0; + q1 = 0; + + /* Remainder in n1n0. */ + if (rp != 0) { + rr.s.low = n0; + rr.s.high = n1; + *rp = rr.ll; + } + } else { + /* 0q = NN / dd */ + + count_leading_zeros(bm, d1); + if (bm == 0) { + /* From (n1 >= d1) /\ (the most significant bit of d1 is set), + conclude (the most significant bit of n1 is set) /\ (the + quotient digit q0 = 0 or 1). + + This special case is necessary, not an optimization. */ + + /* The condition on the next line takes advantage of that + n1 >= d1 (true due to program flow). */ + if (n1 > d1 || n0 >= d0) { + q0 = 1; + sub_ddmmss(n1, n0, n1, n0, d1, d0); + } else + q0 = 0; + + q1 = 0; + + if (rp != 0) { + rr.s.low = n0; + rr.s.high = n1; + *rp = rr.ll; + } + } else { + u32 m1, m0; + /* Normalize. */ + + b = SI_TYPE_SIZE - bm; + + d1 = (d1 << bm) | (d0 >> b); + d0 = d0 << bm; + n2 = n1 >> b; + n1 = (n1 << bm) | (n0 >> b); + n0 = n0 << bm; + + udiv_qrnnd(q0, n1, n2, n1, d1); + umul_ppmm(m1, m0, q0, d0); + + if (m1 > n1 || (m1 == n1 && m0 > n0)) { + q0--; + sub_ddmmss(m1, m0, m1, m0, d1, d0); + } + + q1 = 0; + + /* Remainder in (n1n0 - m1m0) >> bm. */ + if (rp != 0) { + sub_ddmmss(n1, n0, n1, n0, m1, m0); + rr.s.low = (n1 << b) | (n0 >> bm); + rr.s.high = n1 >> bm; + *rp = rr.ll; + } + } + } + } + + ww.s.low = q0; + ww.s.high = q1; + return ww.ll; } -UDItype -__udivdi3 (UDItype n, UDItype d) +u64 __udivdi3(u64 n, u64 d) { - return __udivmoddi4 (n, d, (UDItype *) 0); + return __udivmoddi4(n, d, (u64 *) 0); } -UDItype -__umoddi3 (UDItype u, UDItype v) +u64 __umoddi3(u64 u, u64 v) { - UDItype w; + u64 w; - (void) __udivmoddi4 (u ,v, &w); + (void)__udivmoddi4(u, v, &w); - return w; + return w; } - diff --git a/arch/arm/mach-aaec2000/Kconfig b/arch/arm/mach-aaec2000/Kconfig new file mode 100644 index 00000000000..5e4bef93754 --- /dev/null +++ b/arch/arm/mach-aaec2000/Kconfig @@ -0,0 +1,11 @@ +if ARCH_AAEC2000 + +menu "Agilent AAEC-2000 Implementations" + +config MACH_AAED2000 + bool "Agilent AAED-2000 Development Platform" + select CPU_ARM920T + +endmenu + +endif diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile new file mode 100644 index 00000000000..20ec83896c3 --- /dev/null +++ b/arch/arm/mach-aaec2000/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the linux kernel. +# + +# Common support (must be linked before board specific support) +obj-y += core.o + +# Specific board support +obj-$(CONFIG_MACH_AAED2000) += aaed2000.o diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c new file mode 100644 index 00000000000..5417ca3f462 --- /dev/null +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -0,0 +1,48 @@ +/* + * linux/arch/arm/mach-aaec2000/aaed2000.c + * + * Support for the Agilent AAED-2000 Development Platform. + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/major.h> +#include <linux/interrupt.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "core.h" + +static void __init aaed2000_init_irq(void) +{ + aaec2000_init_irq(); +} + +static void __init aaed2000_map_io(void) +{ + aaec2000_map_io(); +} + +MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") + MAINTAINER("Nicolas Bellido Y Ortega") + BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE) + MAPIO(aaed2000_map_io) + INITIRQ(aaed2000_init_irq) + .timer = &aaec2000_timer, +MACHINE_END diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c new file mode 100644 index 00000000000..fc145b3768f --- /dev/null +++ b/arch/arm/mach-aaec2000/core.c @@ -0,0 +1,157 @@ +/* + * linux/arch/arm/mach-aaec2000/core.c + * + * Code common to all AAEC-2000 machines + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/signal.h> + +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +/* + * Common I/O mapping: + * + * Static virtual address mappings are as follow: + * + * 0xf8000000-0xf8001ffff: Devices connected to APB bus + * 0xf8002000-0xf8003ffff: Devices connected to AHB bus + * + * Below 0xe8000000 is reserved for vm allocation. + * + * The machine specific code must provide the extra mapping beside the + * default mapping provided here. + */ +static struct map_desc standard_io_desc[] __initdata = { + /* virtual physical length type */ + { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE }, + { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE } +}; + +void __init aaec2000_map_io(void) +{ + iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); +} + +/* + * Interrupt handling routines + */ +static void aaec2000_int_ack(unsigned int irq) +{ + IRQ_INTSR = 1 << irq; +} + +static void aaec2000_int_mask(unsigned int irq) +{ + IRQ_INTENC |= (1 << irq); +} + +static void aaec2000_int_unmask(unsigned int irq) +{ + IRQ_INTENS |= (1 << irq); +} + +static struct irqchip aaec2000_irq_chip = { + .ack = aaec2000_int_ack, + .mask = aaec2000_int_mask, + .unmask = aaec2000_int_unmask, +}; + +void __init aaec2000_init_irq(void) +{ + unsigned int i; + + for (i = 0; i < NR_IRQS; i++) { + set_irq_handler(i, do_level_IRQ); + set_irq_chip(i, &aaec2000_irq_chip); + set_irq_flags(i, IRQF_VALID); + } + + /* Disable all interrupts */ + IRQ_INTENC = 0xffffffff; + + /* Clear any pending interrupts */ + IRQ_INTSR = IRQ_INTSR; +} + +/* + * Time keeping + */ +/* IRQs are disabled before entering here from do_gettimeofday() */ +static unsigned long aaec2000_gettimeoffset(void) +{ + unsigned long ticks_to_match, elapsed, usec; + + /* Get ticks before next timer match */ + ticks_to_match = TIMER1_LOAD - TIMER1_VAL; + + /* We need elapsed ticks since last match */ + elapsed = LATCH - ticks_to_match; + + /* Now, convert them to usec */ + usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; + + return usec; +} + +/* We enter here with IRQs enabled */ +static irqreturn_t +aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* TODO: Check timer accuracy */ + write_seqlock(&xtime_lock); + + timer_tick(regs); + TIMER1_CLEAR = 1; + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction aaec2000_timer_irq = { + .name = "AAEC-2000 Timer Tick", + .flags = SA_INTERRUPT, + .handler = aaec2000_timer_interrupt +}; + +static void __init aaec2000_timer_init(void) +{ + /* Disable timer 1 */ + TIMER1_CTRL = 0; + + /* We have somehow to generate a 100Hz clock. + * We then use the 508KHz timer in periodic mode. + */ + TIMER1_LOAD = LATCH; + TIMER1_CLEAR = 1; /* Clear interrupt */ + + setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq); + + TIMER1_CTRL = TIMER_CTRL_ENABLE | + TIMER_CTRL_PERIODIC | + TIMER_CTRL_CLKSEL_508K; +} + +struct sys_timer aaec2000_timer = { + .init = aaec2000_timer_init, + .offset = aaec2000_gettimeoffset, +}; + diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h new file mode 100644 index 00000000000..91893d848c1 --- /dev/null +++ b/arch/arm/mach-aaec2000/core.h @@ -0,0 +1,16 @@ +/* + * linux/arch/arm/mach-aaec2000/core.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +struct sys_timer; + +extern struct sys_timer aaec2000_timer; +extern void __init aaec2000_map_io(void); +extern void __init aaec2000_init_irq(void); diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 158daaf9e3b..ebb255bdce8 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_PCI) += pci_v3.o pci.o obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index bd17b515431..bd1e5e3c9d3 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -14,6 +14,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/smp.h> #include <asm/hardware.h> #include <asm/irq.h> @@ -221,7 +222,23 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ timer1->TimerClear = 1; - timer_tick(regs); + /* + * the clock tick routines are only processed on the + * primary CPU + */ + if (hard_smp_processor_id() == 0) { + timer_tick(regs); +#ifdef CONFIG_SMP + smp_send_timer(); +#endif + } + +#ifdef CONFIG_SMP + /* + * this is the ARM equivalent of the APIC timer interrupt + */ + update_process_times(user_mode(regs)); +#endif /* CONFIG_SMP */ write_sequnlock(&xtime_lock); diff --git a/arch/arm/mach-integrator/headsmp.S b/arch/arm/mach-integrator/headsmp.S new file mode 100644 index 00000000000..ceaa88e30d7 --- /dev/null +++ b/arch/arm/mach-integrator/headsmp.S @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-integrator/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Integrator specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(integrator_secondary_startup) + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + ldr r6, [r6, r4] +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long phys_pen_release diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 3b948e8c275..e0a01eef099 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = { { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE }, { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE }, { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE }, }; diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index d2c0ab21150..f1436e683b4 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -22,6 +22,8 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/smp.h> +#include <linux/spinlock.h> #include <asm/hardware.h> #include <asm/io.h> @@ -85,4 +87,4 @@ static int __init leds_init(void) return 0; } -__initcall(leds_init); +core_initcall(leds_init); diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c new file mode 100644 index 00000000000..ead15dfcb53 --- /dev/null +++ b/arch/arm/mach-integrator/platsmp.c @@ -0,0 +1,192 @@ +/* + * linux/arch/arm/mach-cintegrator/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/mm.h> + +#include <asm/atomic.h> +#include <asm/delay.h> +#include <asm/mmu_context.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> +#include <asm/smp.h> + +extern void integrator_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __initdata pen_release = -1; +unsigned long __initdata phys_pen_release = 0; + +static DEFINE_SPINLOCK(boot_lock); + +void __init platform_secondary_init(unsigned int cpu) +{ + /* + * the primary core may have used a "cross call" soft interrupt + * to get this processor out of WFI in the BootMonitor - make + * sure that we are no longer being sent this soft interrupt + */ + smp_cross_call_done(cpumask_of_cpu(cpu)); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + secondary_scan_irqs(); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __init boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu; + + /* + * XXX + * + * This is a later addition to the booting protocol: the + * bootMonitor now puts secondary cores into WFI, so + * poke_milo() no longer gets the cores moving; we need + * to send a soft interrupt to wake the secondary core. + * Use smp_cross_call() for this, since there's little + * point duplicating the code here + */ + smp_cross_call(cpumask_of_cpu(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init poke_milo(void) +{ + extern void secondary_startup(void); + + /* nobody is to be released from the pen yet */ + pen_release = -1; + + phys_pen_release = virt_to_phys(&pen_release); + + /* + * write the address of secondary startup into the system-wide + * flags register, then clear the bottom two bits, which is what + * BootMonitor is waiting for + */ +#if 1 +#define CINTEGRATOR_HDR_FLAGSS_OFFSET 0x30 + __raw_writel(virt_to_phys(integrator_secondary_startup), + (IO_ADDRESS(INTEGRATOR_HDR_BASE) + + CINTEGRATOR_HDR_FLAGSS_OFFSET)); +#define CINTEGRATOR_HDR_FLAGSC_OFFSET 0x34 + __raw_writel(3, + (IO_ADDRESS(INTEGRATOR_HDR_BASE) + + CINTEGRATOR_HDR_FLAGSC_OFFSET)); +#endif + + mb(); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "Integrator/CP: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "Integrator/CP: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + /* + * start with some more config for the Boot CPU, now that + * the world is a bit more alive (which was not the case + * when smp_prepare_boot_cpu() was called) + */ + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present mask - this tells us which CPUs should + * be present. + */ + for (i = 0; i < max_cpus; i++) { + cpu_set(i, cpu_present_mask); + } + + /* + * Do we need any more CPUs? If so, then let them know where + * to start. Note that, on modern versions of MILO, the "poke" + * doesn't actually do anything until each individual core is + * sent a soft interrupt to get it out of WFI + */ + if (max_cpus > 1) + poke_milo(); +} diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 4f3c3d5c781..fc0555596d6 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -162,12 +162,13 @@ void __init ixp2000_map_io(void) static unsigned ticks_per_jiffy; static unsigned ticks_per_usec; static unsigned next_jiffy_time; +static volatile unsigned long *missing_jiffy_timer_csr; unsigned long ixp2000_gettimeoffset (void) { unsigned long offset; - offset = next_jiffy_time - *IXP2000_T4_CSR; + offset = next_jiffy_time - *missing_jiffy_timer_csr; return offset / ticks_per_usec; } @@ -179,7 +180,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* clear timer 1 */ ixp2000_reg_write(IXP2000_T1_CLR, 1); - while ((next_jiffy_time - *IXP2000_T4_CSR) > ticks_per_jiffy) { + while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; } @@ -197,20 +198,37 @@ static struct irqaction ixp2000_timer_irq = { void __init ixp2000_init_time(unsigned long tick_rate) { - ixp2000_reg_write(IXP2000_T1_CLR, 0); - ixp2000_reg_write(IXP2000_T4_CLR, 0); - ticks_per_jiffy = (tick_rate + HZ/2) / HZ; ticks_per_usec = tick_rate / 1000000; + /* + * We use timer 1 as our timer interrupt. + */ + ixp2000_reg_write(IXP2000_T1_CLR, 0); ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); /* - * We use T4 as a monotonic counter to track missed jiffies + * We use a second timer as a monotonic counter for tracking + * missed jiffies. The IXP2000 has four timers, but if we're + * on an A-step IXP2800, timer 2 and 3 don't work, so on those + * chips we use timer 4. Timer 4 is the only timer that can + * be used for the watchdog, so we use timer 2 if we're on a + * non-buggy chip. */ - ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { + printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n"); + + ixp2000_reg_write(IXP2000_T4_CLR, 0); + ixp2000_reg_write(IXP2000_T4_CLD, -1); + ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T4_CSR; + } else { + ixp2000_reg_write(IXP2000_T2_CLR, 0); + ixp2000_reg_write(IXP2000_T2_CLD, -1); + ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T2_CSR; + } next_jiffy_time = 0xffffffff; /* register for interrupt */ diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index dd012d6e2f5..f2c9e0d2b24 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/sysdev.h> #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> @@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int lubbock_irq_resume(struct sys_device *dev) +{ + LUB_IRQ_MASK_EN = lubbock_irq_enabled; + return 0; +} + +static struct sysdev_class lubbock_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = lubbock_irq_resume, +}; + +static struct sys_device lubbock_irq_device = { + .cls = &lubbock_irq_sysclass, +}; + +static int __init lubbock_irq_device_init(void) +{ + int ret = sysdev_class_register(&lubbock_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lubbock_irq_device); + return ret; +} + +device_initcall(lubbock_irq_device_init); + +#endif + static int lubbock_udc_is_connected(void) { return (LUB_MISC_RD & (1 << 9)) == 0; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 3f952237ae3..9896afca751 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/device.h> +#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = { .unmask = mainstone_unmask_irq, }; - static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { @@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void) set_irq_type(IRQ_GPIO(0), IRQT_FALLING); } +#ifdef CONFIG_PM + +static int mainstone_irq_resume(struct sys_device *dev) +{ + MST_INTMSKENA = mainstone_irq_enabled; + return 0; +} + +static struct sysdev_class mainstone_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = mainstone_irq_resume, +}; + +static struct sys_device mainstone_irq_device = { + .cls = &mainstone_irq_sysclass, +}; + +static int __init mainstone_irq_device_init(void) +{ + int ret = sysdev_class_register(&mainstone_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&mainstone_irq_device); + return ret; +} + +device_initcall(mainstone_irq_device_init); + +#endif + static struct resource smc91x_resources[] = { [0] = { @@ -304,6 +333,15 @@ static void __init mainstone_map_io(void) PWER = 0xC0000002; PRER = 0x00000002; PFER = 0x00000002; + /* for use I SRAM as framebuffer. */ + PSLR |= 0xF04; + PCFR = 0x66; + /* For Keypad wakeup. */ + KPC &=~KPC_ASACT; + KPC |=KPC_AS; + PKWR = 0x000FD000; + /* Need read PKWR back after set it. */ + PKWR; } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 82a4bf34c25..ac4dd433616 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -29,9 +29,6 @@ */ #undef DEBUG -extern void pxa_cpu_suspend(void); -extern void pxa_cpu_resume(void); - #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] @@ -63,6 +60,12 @@ enum { SLEEP_SAVE_START = 0, SLEEP_SAVE_ICMR, SLEEP_SAVE_CKEN, +#ifdef CONFIG_PXA27x + SLEEP_SAVE_MDREFR, + SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, + SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, +#endif + SLEEP_SAVE_CKSUM, SLEEP_SAVE_SIZE @@ -75,9 +78,7 @@ static int pxa_pm_enter(suspend_state_t state) unsigned long checksum = 0; struct timespec delta, rtc; int i; - - if (state != PM_SUSPEND_MEM) - return -EINVAL; + extern void pxa_cpu_pm_enter(suspend_state_t state); #ifdef CONFIG_IWMMXT /* force any iWMMXt context to ram **/ @@ -100,16 +101,17 @@ static int pxa_pm_enter(suspend_state_t state) SAVE(GAFR2_L); SAVE(GAFR2_U); #ifdef CONFIG_PXA27x + SAVE(MDREFR); SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3); SAVE(GAFR3_L); SAVE(GAFR3_U); + SAVE(PWER); SAVE(PCFR); SAVE(PRER); + SAVE(PFER); SAVE(PKWR); #endif SAVE(ICMR); ICMR = 0; SAVE(CKEN); - CKEN = 0; - SAVE(PSTR); /* Note: wake up source are set up in each machine specific files */ @@ -123,16 +125,15 @@ static int pxa_pm_enter(suspend_state_t state) /* Clear sleep reset status */ RCSR = RCSR_SMR; - /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); - /* before sleeping, calculate and save a checksum */ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) checksum += sleep_save[i]; sleep_save[SLEEP_SAVE_CKSUM] = checksum; /* *** go zzz *** */ - pxa_cpu_suspend(); + pxa_cpu_pm_enter(state); + + cpu_init(); /* after sleeping, validate the checksum */ checksum = 0; @@ -145,7 +146,7 @@ static int pxa_pm_enter(suspend_state_t state) LUB_HEXLED = 0xbadbadc5; #endif while (1) - pxa_cpu_suspend(); + pxa_cpu_pm_enter(state); } /* ensure not to come back here if it wasn't intended */ @@ -162,8 +163,11 @@ static int pxa_pm_enter(suspend_state_t state) RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); #ifdef CONFIG_PXA27x + RESTORE(MDREFR); RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3); RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); + RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); + RESTORE(PFER); RESTORE(PKWR); #endif PSSR = PSSR_RDH | PSSR_PH; @@ -197,7 +201,9 @@ unsigned long sleep_phys_sp(void *sp) */ static int pxa_pm_prepare(suspend_state_t state) { - return 0; + extern int pxa_cpu_pm_prepare(suspend_state_t state); + + return pxa_cpu_pm_prepare(state); } /* diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index e887b7175ef..7869c3b4e62 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,7 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -102,3 +103,35 @@ unsigned int get_lcdclk_frequency_10khz(void) } EXPORT_SYMBOL(get_lcdclk_frequency_10khz); + +#ifdef CONFIG_PM + +int pxa_cpu_pm_prepare(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + break; + default: + return -EINVAL; + } + + return 0; +} + +void pxa_cpu_pm_enter(suspend_state_t state) +{ + extern void pxa_cpu_suspend(unsigned int); + extern void pxa_cpu_resume(void); + + CKEN = 0; + + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + pxa_cpu_suspend(3); + break; + } +} + +#endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7e863afefb5..893964fb965 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -120,6 +120,42 @@ EXPORT_SYMBOL(get_clk_frequency_khz); EXPORT_SYMBOL(get_memclk_frequency_10khz); EXPORT_SYMBOL(get_lcdclk_frequency_10khz); +#ifdef CONFIG_PM + +int pxa_cpu_pm_prepare(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + return 0; + default: + return -EINVAL; + } +} + +void pxa_cpu_pm_enter(suspend_state_t state) +{ + extern void pxa_cpu_standby(void); + extern void pxa_cpu_suspend(unsigned int); + extern void pxa_cpu_resume(void); + + CKEN = CKEN22_MEMC | CKEN9_OSTIMER; + + /* ensure voltage-change sequencer not initiated, which hangs */ + PCFR &= ~PCFR_FVC; + + /* Clear edge-detect status register. */ + PEDR = 0xDF12FE1B; + + switch (state) { + case PM_SUSPEND_MEM: + /* set resume return address */ + PSPR = virt_to_phys(pxa_cpu_resume); + pxa_cpu_suspend(3); + break; + } +} + +#endif /* * device registration specific to PXA27x. diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index bc229fab86d..c7c28890d40 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -785,6 +785,10 @@ int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client) chan->client = NULL; chan->in_use = 0; + if (chan->irq_claimed) + free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + local_irq_restore(flags); return 0; diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 50cde576dad..6923316b3d0 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -150,7 +150,7 @@ config SA1100_SSP config H3600_SLEEVE tristate "Compaq iPAQ Handheld sleeve support" - depends on SA1100_H3600 + depends on SA1100_H3100 || SA1100_H3600 help Choose this option to enable support for extension packs (sleeves) for the Compaq iPAQ H3XXX series of handheld computers. This option diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 379ea5e3950..59c7964cfe1 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -88,6 +88,8 @@ static int sa11x0_pm_enter(suspend_state_t state) /* go zzz */ sa1100_cpu_suspend(); + cpu_init(); + /* * Ensure not to come back here if it wasn't intended */ diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 5d608837757..ba81e70ed81 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -5,3 +5,4 @@ obj-y := core.o clock.o obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 554e1bd30d6..6a7cbea5e09 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -196,11 +196,15 @@ static struct map_desc versatile_io_desc[] __initdata = { #ifdef CONFIG_DEBUG_LL { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE }, #endif -#ifdef FIXME - { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE }, - { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE }, - { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_512K, MT_DEVICE }, - { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE }, +#ifdef CONFIG_PCI + { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE }, + { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE }, + { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE }, +#if 0 + { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE }, + { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE }, + { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE }, +#endif #endif }; @@ -543,7 +547,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) val |= SYS_CLCD_MODE_5551; break; case 6: - val |= SYS_CLCD_MODE_565_BLSB; + val |= SYS_CLCD_MODE_565_RLSB; break; case 8: val |= SYS_CLCD_MODE_888; diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c new file mode 100644 index 00000000000..d1565e851f0 --- /dev/null +++ b/arch/arm/mach-versatile/pci.c @@ -0,0 +1,360 @@ +/* + * linux/arch/arm/mach-versatile/pci.c + * + * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved. + * You can redistribute and/or modify this software under the terms of version 2 + * of the GNU General Public License as published by the Free Software Foundation. + * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software. + * + * ARM Versatile PCI driver. + * + * 14/04/2005 Initial version, colin.king@philips.com + * + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/init.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +/* + * these spaces are mapped using the following base registers: + * + * Usage Local Bus Memory Base/Map registers used + * + * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0, non prefetch + * Mem 60000000 - 6FFFFFFF LB_BASE1/LB_MAP1, prefetch + * IO 44000000 - 4FFFFFFF LB_BASE2/LB_MAP2, IO + * Cfg 42000000 - 42FFFFFF PCI config + * + */ +#define SYS_PCICTL IO_ADDRESS(VERSATILE_SYS_PCICTL) +#define PCI_IMAP0 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0) +#define PCI_IMAP1 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4) +#define PCI_IMAP2 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8) +#define PCI_SMAP0 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10) +#define PCI_SMAP1 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14) +#define PCI_SMAP2 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18) +#define PCI_SELFID IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc) + +#define DEVICE_ID_OFFSET 0x00 +#define CSR_OFFSET 0x04 +#define CLASS_ID_OFFSET 0x08 + +#define VP_PCI_DEVICE_ID 0x030010ee +#define VP_PCI_CLASS_ID 0x0b400000 + +static unsigned long pci_slot_ignore = 0; + +static int __init versatile_pci_slot_ignore(char *str) +{ + int retval; + int slot; + + while ((retval = get_option(&str,&slot))) { + if ((slot < 0) || (slot > 31)) { + printk("Illegal slot value: %d\n",slot); + } else { + pci_slot_ignore |= (1 << slot); + } + } + return 1; +} + +__setup("pci_slot_ignore=", versatile_pci_slot_ignore); + + +static unsigned long __pci_addr(struct pci_bus *bus, + unsigned int devfn, int offset) +{ + unsigned int busnr = bus->number; + + /* + * Trap out illegal values + */ + if (offset > 255) + BUG(); + if (busnr > 255) + BUG(); + if (devfn > 255) + BUG(); + + return (VERSATILE_PCI_CFG_VIRT_BASE | (busnr << 16) | + (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset); +} + +static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + unsigned long addr = __pci_addr(bus, devfn, where); + u32 v; + int slot = PCI_SLOT(devfn); + + if (pci_slot_ignore & (1 << slot)) { + /* Ignore this slot */ + switch (size) { + case 1: + v = 0xff; + break; + case 2: + v = 0xffff; + break; + default: + v = 0xffffffff; + } + } else { + switch (size) { + case 1: + addr &= ~3; + v = __raw_readb(addr); + break; + + case 2: + v = __raw_readl(addr & ~3); + if (addr & 2) v >>= 16; + v &= 0xffff; + break; + + default: + addr &= ~3; + v = __raw_readl(addr); + break; + } + } + + *val = v; + return PCIBIOS_SUCCESSFUL; +} + +static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + unsigned long addr = __pci_addr(bus, devfn, where); + int slot = PCI_SLOT(devfn); + + if (pci_slot_ignore & (1 << slot)) { + return PCIBIOS_SUCCESSFUL; + } + + switch (size) { + case 1: + __raw_writeb((u8)val, addr); + break; + + case 2: + __raw_writew((u16)val, addr); + break; + + case 4: + __raw_writel(val, addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_versatile_ops = { + .read = versatile_read_config, + .write = versatile_write_config, +}; + +static struct resource io_mem = { + .name = "PCI I/O space", + .start = VERSATILE_PCI_MEM_BASE0, + .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, + .flags = IORESOURCE_IO, +}; + +static struct resource non_mem = { + .name = "PCI non-prefetchable", + .start = VERSATILE_PCI_MEM_BASE1, + .end = VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1, + .flags = IORESOURCE_MEM, +}; + +static struct resource pre_mem = { + .name = "PCI prefetchable", + .start = VERSATILE_PCI_MEM_BASE2, + .end = VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1, + .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, +}; + +static int __init pci_versatile_setup_resources(struct resource **resource) +{ + int ret = 0; + + ret = request_resource(&iomem_resource, &io_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate I/O " + "memory region (%d)\n", ret); + goto out; + } + ret = request_resource(&iomem_resource, &non_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate non-prefetchable " + "memory region (%d)\n", ret); + goto release_io_mem; + } + ret = request_resource(&iomem_resource, &pre_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate prefetchable " + "memory region (%d)\n", ret); + goto release_non_mem; + } + + /* + * bus->resource[0] is the IO resource for this bus + * bus->resource[1] is the mem resource for this bus + * bus->resource[2] is the prefetch mem resource for this bus + */ + resource[0] = &io_mem; + resource[1] = &non_mem; + resource[2] = &pre_mem; + + goto out; + + release_non_mem: + release_resource(&non_mem); + release_io_mem: + release_resource(&io_mem); + out: + return ret; +} + +int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + int i; + int myslot = -1; + unsigned long val; + + if (nr == 0) { + sys->mem_offset = 0; + ret = pci_versatile_setup_resources(sys->resource); + if (ret < 0) { + printk("pci_versatile_setup: resources... oops?\n"); + goto out; + } + } else { + printk("pci_versatile_setup: resources... nr == 0??\n"); + goto out; + } + + __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0); + __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1); + __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2); + + __raw_writel(1, SYS_PCICTL); + + val = __raw_readl(SYS_PCICTL); + if (!(val & 1)) { + printk("Not plugged into PCI backplane!\n"); + ret = -EIO; + goto out; + } + + /* + * We need to discover the PCI core first to configure itself + * before the main PCI probing is performed + */ + for (i=0; i<32; i++) { + if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && + (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { + myslot = i; + + __raw_writel(myslot, PCI_SELFID); + val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); + val |= (1<<2); + __raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); + break; + } + } + + if (myslot == -1) { + printk("Cannot find PCI core!\n"); + ret = -EIO; + } else { + printk("PCI core found (slot %d)\n",myslot); + /* Do not to map Versatile FPGA PCI device + into memory space as we are short of + mappable memory */ + pci_slot_ignore |= (1 << myslot); + ret = 1; + } + + out: + return ret; +} + + +struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); +} + +/* + * V3_LB_BASE? - local bus address + * V3_LB_MAP? - pci bus address + */ +void __init pci_versatile_preinit(void) +{ +} + +void __init pci_versatile_postinit(void) +{ +} + + +/* + * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. + */ +static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + int devslot = PCI_SLOT(dev->devfn); + + /* slot, pin, irq + 24 1 27 + 25 1 28 untested + 26 1 29 + 27 1 30 untested + */ + + irq = 27 + ((slot + pin + 2) % 3); /* Fudged */ + + printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); + + return irq; +} + +static struct hw_pci versatile_pci __initdata = { + .swizzle = NULL, + .map_irq = versatile_map_irq, + .nr_controllers = 1, + .setup = pci_versatile_setup, + .scan = pci_versatile_scan_bus, + .preinit = pci_versatile_preinit, + .postinit = pci_versatile_postinit, +}; + +static int __init versatile_pci_init(void) +{ + pci_common_init(&versatile_pci); + return 0; +} + +subsys_initcall(versatile_pci_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 48bac7da8c7..95606b4a3ba 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -62,7 +62,7 @@ config CPU_ARM720T # ARM920T config CPU_ARM920T bool "Support ARM920T processor" if !ARCH_S3C2410 - depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX + depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 default y if ARCH_S3C2410 select CPU_32v4 select CPU_ABRT_EV4T @@ -228,7 +228,6 @@ config CPU_SA1100 select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_TLB_V4WB - select CPU_MINICACHE # XScale config CPU_XSCALE @@ -239,7 +238,6 @@ config CPU_XSCALE select CPU_ABRT_EV5T select CPU_CACHE_VIVT select CPU_TLB_V4WBI - select CPU_MINICACHE # ARMv6 config CPU_V6 @@ -345,11 +343,6 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool -config CPU_MINICACHE - bool - help - Processor has a minicache. - comment "Processor Features" config ARM_THUMB @@ -429,3 +422,11 @@ config HAS_TLS_REG assume directly accessing that register and always obtain the expected value only on ARMv7 and above. +config NEEDS_SYSCALL_FOR_CMPXCHG + bool + default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) + help + SMP on a pre-ARMv6 processor? Well OK then. + Forget about fast user space cmpxchg support. + It is just not possible. + diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index ccf316c11e0..59f47d4c2df 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -31,8 +31,6 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o -obj-$(CONFIG_CPU_MINICACHE) += minicache.o - obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index a8c00236bd3..27d041574ea 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -30,8 +30,6 @@ static DEFINE_SPINLOCK(v6_lock); -#define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) - /* * Copy the user page. No aliasing to deal with so we can just * attack the kernel's existing mapping of these pages. @@ -55,7 +53,7 @@ void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr) */ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr) { - unsigned int offset = DCACHE_COLOUR(vaddr); + unsigned int offset = CACHE_COLOUR(vaddr); unsigned long from, to; /* @@ -95,7 +93,7 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd */ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) { - unsigned int offset = DCACHE_COLOUR(vaddr); + unsigned int offset = CACHE_COLOUR(vaddr); unsigned long to = to_address + (offset << PAGE_SHIFT); /* diff --git a/arch/arm/mm/copypage-xscale.S b/arch/arm/mm/copypage-xscale.S deleted file mode 100644 index bb277316ef5..00000000000 --- a/arch/arm/mm/copypage-xscale.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * linux/arch/arm/lib/copypage-xscale.S - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/constants.h> - -/* - * General note: - * We don't really want write-allocate cache behaviour for these functions - * since that will just eat through 8K of the cache. - */ - - .text - .align 5 -/* - * XScale optimised copy_user_page - * r0 = destination - * r1 = source - * r2 = virtual user address of ultimate destination page - * - * The source page may have some clean entries in the cache already, but we - * can safely ignore them - break_cow() will flush them out of the cache - * if we eventually end up using our copied page. - * - * What we could do is use the mini-cache to buffer reads from the source - * page. We rely on the mini-cache being smaller than one page, so we'll - * cycle through the complete cache anyway. - */ -ENTRY(xscale_mc_copy_user_page) - stmfd sp!, {r4, r5, lr} - mov r5, r0 - mov r0, r1 - bl map_page_minicache - mov r1, r5 - mov lr, #PAGE_SZ/64-1 - - /* - * Strangely enough, best performance is achieved - * when prefetching destination as well. (NP) - */ - pld [r0, #0] - pld [r0, #32] - pld [r1, #0] - pld [r1, #32] - -1: pld [r0, #64] - pld [r0, #96] - pld [r1, #64] - pld [r1, #96] - -2: ldrd r2, [r0], #8 - ldrd r4, [r0], #8 - mov ip, r1 - strd r2, [r1], #8 - ldrd r2, [r0], #8 - strd r4, [r1], #8 - ldrd r4, [r0], #8 - strd r2, [r1], #8 - strd r4, [r1], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - ldrd r2, [r0], #8 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - ldrd r4, [r0], #8 - mov ip, r1 - strd r2, [r1], #8 - ldrd r2, [r0], #8 - strd r4, [r1], #8 - ldrd r4, [r0], #8 - strd r2, [r1], #8 - strd r4, [r1], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - subs lr, lr, #1 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - bgt 1b - beq 2b - - ldmfd sp!, {r4, r5, pc} - - .align 5 -/* - * XScale optimised clear_user_page - * r0 = destination - * r1 = virtual user address of ultimate destination page - */ -ENTRY(xscale_mc_clear_user_page) - mov r1, #PAGE_SZ/32 - mov r2, #0 - mov r3, #0 -1: mov ip, r0 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - mcr p15, 0, ip, c7, c10, 1 @ clean D line - subs r1, r1, #1 - mcr p15, 0, ip, c7, c6, 1 @ invalidate D line - bne 1b - mov pc, lr - - __INITDATA - - .type xscale_mc_user_fns, #object -ENTRY(xscale_mc_user_fns) - .long xscale_mc_clear_user_page - .long xscale_mc_copy_user_page - .size xscale_mc_user_fns, . - xscale_mc_user_fns diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c new file mode 100644 index 00000000000..42a6ee255ce --- /dev/null +++ b/arch/arm/mm/copypage-xscale.c @@ -0,0 +1,131 @@ +/* + * linux/arch/arm/lib/copypage-xscale.S + * + * Copyright (C) 1995-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This handles the mini data cache, as found on SA11x0 and XScale + * processors. When we copy a user page page, we map it in such a way + * that accesses to this page will not touch the main data cache, but + * will be cached in the mini data cache. This prevents us thrashing + * the main data cache on page faults. + */ +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> + +/* + * 0xffff8000 to 0xffffffff is reserved for any ARM architecture + * specific hacks for copying pages efficiently. + */ +#define COPYPAGE_MINICACHE 0xffff8000 + +#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ + L_PTE_CACHEABLE) + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static DEFINE_SPINLOCK(minicache_lock); + +/* + * XScale mini-dcache optimised copy_user_page + * + * We flush the destination cache lines just before we write the data into the + * corresponding address. Since the Dcache is read-allocate, this removes the + * Dcache aliasing issue. The writes will be forwarded to the write buffer, + * and merged as appropriate. + */ +static void __attribute__((naked)) +mc_copy_user_page(void *from, void *to) +{ + /* + * Strangely enough, best performance is achieved + * when prefetching destination as well. (NP) + */ + asm volatile( + "stmfd sp!, {r4, r5, lr} \n\ + mov lr, %2 \n\ + pld [r0, #0] \n\ + pld [r0, #32] \n\ + pld [r1, #0] \n\ + pld [r1, #32] \n\ +1: pld [r0, #64] \n\ + pld [r0, #96] \n\ + pld [r1, #64] \n\ + pld [r1, #96] \n\ +2: ldrd r2, [r0], #8 \n\ + ldrd r4, [r0], #8 \n\ + mov ip, r1 \n\ + strd r2, [r1], #8 \n\ + ldrd r2, [r0], #8 \n\ + strd r4, [r1], #8 \n\ + ldrd r4, [r0], #8 \n\ + strd r2, [r1], #8 \n\ + strd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + ldrd r2, [r0], #8 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + ldrd r4, [r0], #8 \n\ + mov ip, r1 \n\ + strd r2, [r1], #8 \n\ + ldrd r2, [r0], #8 \n\ + strd r4, [r1], #8 \n\ + ldrd r4, [r0], #8 \n\ + strd r2, [r1], #8 \n\ + strd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + subs lr, lr, #1 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + bgt 1b \n\ + beq 2b \n\ + ldmfd sp!, {r4, r5, pc} " + : + : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1)); +} + +void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) +{ + spin_lock(&minicache_lock); + + set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot)); + flush_tlb_kernel_page(COPYPAGE_MINICACHE); + + mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); + + spin_unlock(&minicache_lock); +} + +/* + * XScale optimised clear_user_page + */ +void __attribute__((naked)) +xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr) +{ + asm volatile( + "mov r1, %0 \n\ + mov r2, #0 \n\ + mov r3, #0 \n\ +1: mov ip, r0 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + strd r2, [r0], #8 \n\ + mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ + subs r1, r1, #1 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ + bne 1b \n\ + mov pc, lr" + : + : "I" (PAGE_SIZE / 32)); +} + +struct cpu_user_fns xscale_mc_user_fns __initdata = { + .cpu_clear_user_page = xscale_mc_clear_user_page, + .cpu_copy_user_page = xscale_mc_copy_user_page, +}; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 01967ddeef5..be4ab3d73c9 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -77,9 +77,8 @@ no_pmd: } static void -make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, int dirty) +make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) { - struct address_space *mapping = page_mapping(page); struct mm_struct *mm = vma->vm_mm; struct vm_area_struct *mpnt; struct prio_tree_iter iter; @@ -87,9 +86,6 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, pgoff_t pgoff; int aliases = 0; - if (!mapping) - return; - pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT); /* @@ -115,9 +111,11 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, if (aliases) adjust_pte(vma, addr); else - flush_cache_page(vma, addr, page_to_pfn(page)); + flush_cache_page(vma, addr, pfn); } +void __flush_dcache_page(struct address_space *mapping, struct page *page); + /* * Take care of architecture specific things when placing a new PTE into * a page table, or changing an existing PTE. Basically, there are two @@ -134,29 +132,22 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte) { unsigned long pfn = pte_pfn(pte); + struct address_space *mapping; struct page *page; if (!pfn_valid(pfn)) return; + page = pfn_to_page(pfn); - if (page_mapping(page)) { + mapping = page_mapping(page); + if (mapping) { int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); - if (dirty) { - /* - * This is our first userspace mapping of this page. - * Ensure that the physical page is coherent with - * the kernel mapping. - * - * FIXME: only need to do this on VIVT and aliasing - * VIPT cache architectures. We can do that - * by choosing whether to set this bit... - */ - __cpuc_flush_dcache_page(page_address(page)); - } + if (dirty) + __flush_dcache_page(mapping, page); if (cache_is_vivt()) - make_coherent(vma, addr, page, dirty); + make_coherent(mapping, vma, addr, pfn); } } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 4085ed983e4..191788fb18d 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -37,13 +37,8 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) #define flush_pfn_alias(pfn,vaddr) do { } while (0) #endif -static void __flush_dcache_page(struct address_space *mapping, struct page *page) +void __flush_dcache_page(struct address_space *mapping, struct page *page) { - struct mm_struct *mm = current->active_mm; - struct vm_area_struct *mpnt; - struct prio_tree_iter iter; - pgoff_t pgoff; - /* * Writeback any data associated with the kernel mapping of this * page. This ensures that data in the physical page is mutually @@ -52,24 +47,21 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page __cpuc_flush_dcache_page(page_address(page)); /* - * If there's no mapping pointer here, then this page isn't - * visible to userspace yet, so there are no cache lines - * associated with any other aliases. - */ - if (!mapping) - return; - - /* - * This is a page cache page. If we have a VIPT cache, we - * only need to do one flush - which would be at the relevant + * If this is a page cache page, and we have an aliasing VIPT cache, + * we only need to do one flush - which would be at the relevant * userspace colour, which is congruent with page->index. */ - if (cache_is_vipt()) { - if (cache_is_vipt_aliasing()) - flush_pfn_alias(page_to_pfn(page), - page->index << PAGE_CACHE_SHIFT); - return; - } + if (mapping && cache_is_vipt_aliasing()) + flush_pfn_alias(page_to_pfn(page), + page->index << PAGE_CACHE_SHIFT); +} + +static void __flush_dcache_aliases(struct address_space *mapping, struct page *page) +{ + struct mm_struct *mm = current->active_mm; + struct vm_area_struct *mpnt; + struct prio_tree_iter iter; + pgoff_t pgoff; /* * There are possible user space mappings of this page: @@ -116,12 +108,12 @@ void flush_dcache_page(struct page *page) { struct address_space *mapping = page_mapping(page); - if (cache_is_vipt_nonaliasing()) - return; - if (mapping && !mapping_mapped(mapping)) set_bit(PG_dcache_dirty, &page->flags); - else + else { __flush_dcache_page(mapping, page); + if (mapping && cache_is_vivt()) + __flush_dcache_aliases(mapping, page); + } } EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 00bb8fd37a5..7110e54182b 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -170,3 +170,50 @@ void __iounmap(void __iomem *addr) vfree((void *) (PAGE_MASK & (unsigned long) addr)); } EXPORT_SYMBOL(__iounmap); + +#ifdef __io +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return __io(port); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ +} +EXPORT_SYMBOL(ioport_unmap); +#endif + +#ifdef CONFIG_PCI +#include <linux/pci.h> +#include <linux/ioport.h> + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len || !start) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + return ioremap_nocache(start, len); + } + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + if ((unsigned long)addr >= VMALLOC_START && + (unsigned long)addr < VMALLOC_END) + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); +#endif diff --git a/arch/arm/mm/minicache.c b/arch/arm/mm/minicache.c deleted file mode 100644 index dedf2ab01b2..00000000000 --- a/arch/arm/mm/minicache.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/arch/arm/mm/minicache.c - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This handles the mini data cache, as found on SA11x0 and XScale - * processors. When we copy a user page page, we map it in such a way - * that accesses to this page will not touch the main data cache, but - * will be cached in the mini data cache. This prevents us thrashing - * the main data cache on page faults. - */ -#include <linux/init.h> -#include <linux/mm.h> - -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/tlbflush.h> - -/* - * 0xffff8000 to 0xffffffff is reserved for any ARM architecture - * specific hacks for copying pages efficiently. - */ -#define minicache_address (0xffff8000) -#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \ - L_PTE_CACHEABLE) - -static pte_t *minicache_pte; - -/* - * Note that this is intended to be called only from the copy_user_page - * asm code; anything else will require special locking to prevent the - * mini-cache space being re-used. (Note: probably preempt unsafe). - * - * We rely on the fact that the minicache is 2K, and we'll be pushing - * 4K of data through it, so we don't actually have to specifically - * flush the minicache when we change the mapping. - * - * Note also: assert(PAGE_OFFSET <= virt < high_memory). - * Unsafe: preempt, kmap. - */ -unsigned long map_page_minicache(unsigned long virt) -{ - set_pte(minicache_pte, pfn_pte(__pa(virt) >> PAGE_SHIFT, minicache_pgprot)); - flush_tlb_kernel_page(minicache_address); - - return minicache_address; -} - -static int __init minicache_init(void) -{ - pgd_t *pgd; - pmd_t *pmd; - - spin_lock(&init_mm.page_table_lock); - - pgd = pgd_offset_k(minicache_address); - pmd = pmd_alloc(&init_mm, pgd, minicache_address); - if (!pmd) - BUG(); - minicache_pte = pte_alloc_kernel(&init_mm, pmd, minicache_address); - if (!minicache_pte) - BUG(); - - spin_unlock(&init_mm.page_table_lock); - - return 0; -} - -core_initcall(minicache_init); |