aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.c280
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.h3
2 files changed, 115 insertions, 168 deletions
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e7220..9756a878fd9 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <mach/control.h>
@@ -26,31 +26,9 @@
#include "mmc-twl4030.h"
-#if defined(CONFIG_TWL4030_CORE) && \
- (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
-#define LDO_CLR 0x00
-#define VSEL_S2_CLR 0x40
-
-#define VMMC1_DEV_GRP 0x27
-#define VMMC1_CLR 0x00
-#define VMMC1_315V 0x03
-#define VMMC1_300V 0x02
-#define VMMC1_285V 0x01
-#define VMMC1_185V 0x00
-#define VMMC1_DEDICATED 0x2A
-
-#define VMMC2_DEV_GRP 0x2B
-#define VMMC2_CLR 0x40
-#define VMMC2_315V 0x0c
-#define VMMC2_300V 0x0b
-#define VMMC2_285V 0x0a
-#define VMMC2_280V 0x09
-#define VMMC2_260V 0x08
-#define VMMC2_185V 0x06
-#define VMMC2_DEDICATED 0x2E
-
-#define VMMC_DEV_GRP_P1 0x20
+#if defined(CONFIG_REGULATOR) && \
+ (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
static struct twl_mmc_controller {
struct omap_mmc_platform_data *mmc;
- u8 twl_vmmc_dev_grp;
- u8 twl_mmc_dedicated;
- char name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
- {
- .twl_vmmc_dev_grp = VMMC1_DEV_GRP,
- .twl_mmc_dedicated = VMMC1_DEDICATED,
- },
- {
- .twl_vmmc_dev_grp = VMMC2_DEV_GRP,
- .twl_mmc_dedicated = VMMC2_DEDICATED,
- },
-};
+ /* Vcc == configured supply
+ * Vcc_alt == optional
+ * - MMC1, supply for DAT4..DAT7
+ * - MMC2/MMC2, external level shifter voltage supply, for
+ * chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+ */
+ struct regulator *vcc;
+ struct regulator *vcc_aux;
+ char name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
static int twl_mmc_card_detect(int irq)
{
@@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
int ret = 0;
int i;
- ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
- if (ret)
- goto done;
- ret = gpio_direction_input(mmc->slots[0].switch_pin);
- if (ret)
- goto err;
+ /* MMC/SD/SDIO doesn't require a card detect switch */
+ if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+ ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+ if (ret)
+ goto done;
+ ret = gpio_direction_input(mmc->slots[0].switch_pin);
+ if (ret)
+ goto err;
+ }
+ /* require at least main regulator */
for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
if (hsmmc[i].name == mmc->slots[0].name) {
+ struct regulator *reg;
+
hsmmc[i].mmc = mmc;
+
+ reg = regulator_get(dev, "vmmc");
+ if (IS_ERR(reg)) {
+ dev_dbg(dev, "vmmc regulator missing\n");
+ /* HACK: until fixed.c regulator is usable,
+ * we don't require a main regulator
+ * for MMC2 or MMC3
+ */
+ if (i != 0)
+ break;
+ ret = PTR_ERR(reg);
+ goto err;
+ }
+ hsmmc[i].vcc = reg;
+ mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+ /* allow an aux regulator */
+ reg = regulator_get(dev, "vmmc_aux");
+ hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+ /* UGLY HACK: workaround regulator framework bugs.
+ * When the bootloader leaves a supply active, it's
+ * initialized with zero usecount ... and we can't
+ * disable it without first enabling it. Until the
+ * framework is fixed, we need a workaround like this
+ * (which is safe for MMC, but not in general).
+ */
+ if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+ regulator_enable(hsmmc[i].vcc);
+ regulator_disable(hsmmc[i].vcc);
+ }
+ if (hsmmc[i].vcc_aux) {
+ if (regulator_is_enabled(reg) > 0) {
+ regulator_enable(reg);
+ regulator_disable(reg);
+ }
+ }
+
break;
}
}
@@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
#define twl_mmc_resume NULL
#endif
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR (MMC_VDD_165_195 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR (MMC_VDD_165_195 \
- |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
- int ret;
- u8 vmmc = 0, dev_grp_val;
-
- if (!vdd)
- goto doit;
-
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
- /* VMMC1: max 220 mA. And for 8-bit mode,
- * VSIM: max 50 mA
- */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC1_185V;
- /* and VSIM_180V */
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC1_285V;
- /* and VSIM_280V */
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC1_300V;
- /* and VSIM_300V */
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC1_315V;
- /* error if VSIM needed */
- break;
- default:
- return -EINVAL;
- }
- } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
- /* VMMC2: max 100 mA */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC2_185V;
- break;
- case MMC_VDD_25_26:
- case MMC_VDD_26_27:
- vmmc = VMMC2_260V;
- break;
- case MMC_VDD_27_28:
- vmmc = VMMC2_280V;
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC2_285V;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC2_300V;
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC2_315V;
- break;
- default:
- return -EINVAL;
- }
- } else {
- return -EINVAL;
- }
-
-doit:
- if (vdd)
- dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
- else
- dev_grp_val = LDO_CLR; /* Power down */
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- dev_grp_val, c->twl_vmmc_dev_grp);
- if (ret || !vdd)
- return ret;
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- vmmc, c->twl_mmc_dedicated);
-
- return ret;
-}
-
static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
@@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
- * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+ * card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
*
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
* is most naturally TWL VSIM; those pins also use PBIAS.
+ *
+ * FIXME handle VMMC1A as needed ...
*/
if (power_on) {
if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, 0);
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
return ret;
}
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
- int ret;
+ int ret = 0;
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /* If we don't see a Vcc regulator, assume it's a fixed
+ * voltage always-on regulator.
+ */
+ if (!c->vcc)
+ return 0;
+
/*
- * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+ * Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
* support cards using voltages other than VDDS (1.8V nominal). When a
* transceiver is used, DAT3..7 are muxed as transceiver control pins.
+ *
+ * In some cases this regulator won't support enable/disable;
+ * e.g. it's a fixed rail for a WLAN chip.
+ *
+ * In other cases vcc_aux switches interface power. Example, for
+ * eMMC cards it represents VccQ. Sometimes transceivers or SDIO
+ * chips/cards need an interface voltage rail too.
*/
if (power_on) {
+ /* only MMC2 supports a CLKIN */
if (mmc->slots[0].internal_clock) {
u32 reg;
@@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
+ /* enable interface voltage rail, if needed */
+ if (ret == 0 && c->vcc_aux) {
+ ret = regulator_enable(c->vcc_aux);
+ if (ret < 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
+ }
} else {
- ret = twl_mmc_set_voltage(c, 0);
+ if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+ ret = regulator_disable(c->vcc_aux);
+ if (ret == 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
}
return ret;
}
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
- /*
- * Assume MMC3 has self-powered device connected, for example on-board
- * chip with external power source.
- */
- return 0;
-}
-
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
+ mmc->init = twl_mmc_late_init;
- /* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+ /* note: twl4030 card detect GPIOs can disable VMMCx ... */
if (gpio_is_valid(c->gpio_cd)) {
- mmc->init = twl_mmc_late_init;
mmc->cleanup = twl_mmc_cleanup;
mmc->suspend = twl_mmc_suspend;
mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
} else
mmc->slots[0].gpio_wp = -EINVAL;
- /* NOTE: we assume OMAP's MMC1 and MMC2 use
- * the TWL4030's VMMC1 and VMMC2, respectively;
- * and that MMC3 device has it's own power source.
+ /* NOTE: MMC slots should have a Vcc regulator set up.
+ * This may be from a TWL4030-family chip, another
+ * controllable regulator, or a fixed supply.
+ *
+ * temporary HACK: ocr_mask instead of fixed supply
*/
+ mmc->slots[0].ocr_mask = c->ocr_mask;
switch (c->mmc) {
case 1:
+ /* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->slots[0].set_power = twl_mmc1_set_power;
- mmc->slots[0].ocr_mask = MMC1_OCR;
break;
case 2:
- mmc->slots[0].set_power = twl_mmc2_set_power;
- if (c->transceiver)
- mmc->slots[0].ocr_mask = MMC2_OCR;
- else
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
- break;
+ if (c->ext_clock)
+ c->transceiver = 1;
+ if (c->transceiver && c->wires > 4)
+ c->wires = 4;
+ /* FALLTHROUGH */
case 3:
- mmc->slots[0].set_power = twl_mmc3_set_power;
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+ /* off-chip level shifting, or none */
+ mmc->slots[0].set_power = twl_mmc23_set_power;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e862429..3807c45c9a6 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
+ int ocr_mask; /* temporary HACK */
};
-#if defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))