diff options
Diffstat (limited to 'arch/arm')
77 files changed, 1754 insertions, 931 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 130e6228b58..7779f2d1aca 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -175,10 +175,10 @@ else endif @touch $@ -archprepare: maketools include/asm-arm/.arch +archprepare: maketools .PHONY: maketools FORCE -maketools: include/linux/version.h FORCE +maketools: include/linux/version.h include/asm-arm/.arch FORCE $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h # Convert bzImage to zImage diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c index 7f6f5db0d06..465c54b6b12 100644 --- a/arch/arm/boot/compressed/ofw-shark.c +++ b/arch/arm/boot/compressed/ofw-shark.c @@ -256,5 +256,5 @@ asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer) temp[11]='\0'; mem_len = OF_getproplen(o,phandle, temp); OF_getprop(o,phandle, temp, buffer, mem_len); - (unsigned char) pointer[32] = ((unsigned char *) buffer)[mem_len-2]; + * ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2]; } diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index d7499071755..c02dc8116a1 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -68,6 +68,7 @@ static void gic_unmask_irq(unsigned int irq) writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4); } +#ifdef CONFIG_SMP static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu) { void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3); @@ -78,6 +79,7 @@ static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu val |= 1 << (cpu + shift); writel(val, reg); } +#endif static struct irqchip gic_chip = { .ack = gic_ack_irq, diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 2786f7c34b3..e8053d16829 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <asm/hardware.h> -#include <asm/mach-types.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/mach/irq.h> @@ -551,7 +550,7 @@ struct locomo_save_data { u16 LCM_SPIMD; }; -static int locomo_suspend(struct device *dev, u32 pm_message_t, u32 level) +static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) { struct locomo *lchip = dev_get_drvdata(dev); struct locomo_save_data *save; diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index f67ca01b498..30e6444f9aa 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:41:21 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:51:52 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -135,7 +135,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -179,6 +178,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -248,6 +309,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -334,72 +396,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -509,6 +507,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -635,7 +635,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -649,11 +649,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -679,30 +696,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -770,6 +772,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -812,8 +815,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index 5c6c928215d..678720fa2e2 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:01 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:01 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -180,6 +179,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -510,6 +508,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -636,7 +636,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -650,11 +650,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -680,30 +697,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -771,6 +773,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -813,8 +816,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 6dc40f6be0e..38c9a721d5c 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:08 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:10 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -180,6 +179,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -511,6 +509,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -651,11 +651,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -681,30 +698,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -772,6 +774,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -814,8 +817,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index d2bb0b7153f..261e2343903 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:20 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:23 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -180,6 +179,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -510,6 +508,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -636,7 +636,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -650,11 +650,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -680,30 +697,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -771,6 +773,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -813,8 +816,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 2d6f960e339..12ef23d1c01 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Thu Jul 7 16:49:13 2005 +# Linux kernel version: 2.6.13 +# Wed Sep 14 10:52:16 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -136,7 +136,6 @@ CONFIG_PCI_NAMES=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -180,6 +179,68 @@ CONFIG_BINFMT_ELF=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -249,6 +310,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP2000=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -335,72 +397,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set @@ -511,6 +509,8 @@ CONFIG_DLCI_MAX=8 # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set -# CONFIG_I2C_IXP2000 is not set +CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -651,11 +651,28 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_SENSOR=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -681,30 +698,15 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -772,6 +774,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -814,8 +817,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 94aafec5fb4..c279e41ed10 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:53:40 2005 +# Linux kernel version: 2.6.14-rc1-git5 +# Tue Sep 20 17:26:28 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,11 +15,13 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,10 +32,13 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -81,6 +85,7 @@ CONFIG_ARCH_IXP4XX=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -90,15 +95,16 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # # IXP4xx Platforms # -# CONFIG_ARCH_AVILA is not set +CONFIG_ARCH_AVILA=y CONFIG_ARCH_ADI_COYOTE=y CONFIG_ARCH_IXDP425=y -# CONFIG_MACH_IXDPG425 is not set -# CONFIG_MACH_IXDP465 is not set +CONFIG_MACH_IXDPG425=y +CONFIG_MACH_IXDP465=y CONFIG_ARCH_IXCDP1100=y CONFIG_ARCH_PRPMC1100=y CONFIG_ARCH_IXDP4XX=y -# CONFIG_MACH_GTWX5715 is not set +CONFIG_CPU_IXP46X=y +CONFIG_MACH_GTWX5715=y # # IXP4xx Options @@ -114,7 +120,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -127,9 +132,10 @@ CONFIG_DMABOUNCE=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -140,6 +146,15 @@ CONFIG_PCI_NAMES=y # Kernel Features # # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_ALIGNMENT_TRAP=y # @@ -175,6 +190,241 @@ CONFIG_PM=y CONFIG_APM=y # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_FWMARK=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +CONFIG_IP_VS=m +CONFIG_IP_VS_DEBUG=y +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +# CONFIG_IP_VS_PROTO_TCP is not set +# CONFIG_IP_VS_PROTO_UDP is not set +# CONFIG_IP_VS_PROTO_ESP is not set +# CONFIG_IP_VS_PROTO_AH is not set + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +# CONFIG_IP_VS_SED is not set +# CONFIG_IP_VS_NQ is not set + +# +# IPVS application helper +# +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +# CONFIG_IP_NF_TFTP is not set +# CONFIG_IP_NF_AMANDA is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +# CONFIG_IP_NF_MATCH_IPRANGE is not set +CONFIG_IP_NF_MATCH_MAC=m +# CONFIG_IP_NF_MATCH_PKTTYPE is not set +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_DSCP is not set +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +# CONFIG_IP_NF_MATCH_HELPER is not set +CONFIG_IP_NF_MATCH_STATE=m +# CONFIG_IP_NF_MATCH_CONNTRACK is not set +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_PHYSDEV is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +CONFIG_IP_NF_TARGET_MARK=m +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +# CONFIG_IP_NF_ARP_MANGLE is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +CONFIG_ATM=y +CONFIG_ATM_CLIP=y +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_X25=m +CONFIG_LAPB=m +# CONFIG_NET_DIVERT is not set +CONFIG_ECONET=m +CONFIG_ECONET_AUNUDP=y +CONFIG_ECONET_NATIVE=y +CONFIG_WAN_ROUTER=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_ATM is not set +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +# CONFIG_NET_SCH_NETEM is not set +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_QOS=y +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_NET_CLS_IND is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_POLICE=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -244,6 +494,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP4XX=y # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -283,7 +534,6 @@ CONFIG_MTD_NAND_IDS=m # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -297,7 +547,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -351,6 +600,7 @@ CONFIG_BLK_DEV_CMD64X=y CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y @@ -369,6 +619,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -379,6 +630,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -391,235 +643,13 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=m -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_FWMARK=y -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -# CONFIG_IP_VS_PROTO_TCP is not set -# CONFIG_IP_VS_PROTO_UDP is not set -# CONFIG_IP_VS_PROTO_ESP is not set -# CONFIG_IP_VS_PROTO_AH is not set - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -# CONFIG_IP_VS_SED is not set -# CONFIG_IP_VS_NQ is not set - -# -# IPVS application helper -# -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# IP: Netfilter Configuration +# Network device support # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -# CONFIG_IP_NF_MATCH_IPRANGE is not set -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -# CONFIG_IP_NF_MATCH_HELPER is not set -CONFIG_IP_NF_MATCH_STATE=m -# CONFIG_IP_NF_MATCH_CONNTRACK is not set -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_PHYSDEV is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -# CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_DSCP is not set -CONFIG_IP_NF_TARGET_MARK=m -# CONFIG_IP_NF_TARGET_CLASSIFY is not set -# CONFIG_IP_NF_RAW is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_ARP_MANGLE is not set - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -CONFIG_ATM=y -CONFIG_ATM_CLIP=y -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -CONFIG_X25=m -CONFIG_LAPB=m -# CONFIG_NET_DIVERT is not set -CONFIG_ECONET=m -CONFIG_ECONET_AUNUDP=y -CONFIG_ECONET_NATIVE=y -CONFIG_WAN_ROUTER=m - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -# CONFIG_NET_SCH_HFSC is not set -# CONFIG_NET_SCH_ATM is not set -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -# CONFIG_NET_SCH_NETEM is not set -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_CLS=y -# CONFIG_NET_CLS_BASIC is not set -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -627,6 +657,11 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -635,6 +670,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -671,13 +707,17 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -702,6 +742,7 @@ CONFIG_NET_RADIO=y CONFIG_HERMES=y # CONFIG_PLX_HERMES is not set # CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set CONFIG_PCI_HERMES=y # CONFIG_ATMEL is not set @@ -709,6 +750,7 @@ CONFIG_PCI_HERMES=y # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -758,6 +800,8 @@ CONFIG_ATM_TCP=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -795,7 +839,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -816,6 +859,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -882,12 +926,11 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_IOP3XX is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP4XX=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -901,14 +944,33 @@ CONFIG_I2C_IXP4XX=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -924,30 +986,26 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -994,6 +1052,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -1004,17 +1063,15 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1034,12 +1091,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1054,8 +1109,7 @@ CONFIG_RAMFS=y # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1072,12 +1126,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1086,6 +1142,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1124,6 +1181,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1158,6 +1216,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 949ec4427f2..2ad4aa2a153 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -131,7 +131,7 @@ __syscall_start: .long sys_wait4 /* 115 */ .long sys_swapoff .long sys_sysinfo - .long sys_ipc + .long sys_ipc_wrapper .long sys_fsync .long sys_sigreturn_wrapper /* 120 */ .long sys_clone_wrapper diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 7152bfbee58..93b5e8e5292 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -537,7 +537,7 @@ ENTRY(__switch_to) #ifdef CONFIG_CPU_MPCORE clrex #else - strex r3, r4, [ip] @ Clear exclusive monitor + strex r5, r4, [ip] @ Clear exclusive monitor #endif #endif #if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index db302c6e534..81d450ac3fa 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -273,6 +273,10 @@ sys_mbind_wrapper: str r5, [sp, #4] b sys_mbind +sys_ipc_wrapper: + str r5, [sp, #4] @ push sixth arg + b sys_ipc + /* * Note: off_4k (r5) is always units of 4K. If we can't do the requested * offset, we return EINVAL. diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c index 6c20c1188b6..1f6822dfae7 100644 --- a/arch/arm/kernel/io.c +++ b/arch/arm/kernel/io.c @@ -7,7 +7,7 @@ * Copy data from IO memory space to "real" memory space. * This needs to be optimized. */ -void _memcpy_fromio(void *to, void __iomem *from, size_t count) +void _memcpy_fromio(void *to, const volatile void __iomem *from, size_t count) { unsigned char *t = to; while (count) { @@ -22,7 +22,7 @@ void _memcpy_fromio(void *to, void __iomem *from, size_t count) * Copy data from "real" memory space to IO memory space. * This needs to be optimized. */ -void _memcpy_toio(void __iomem *to, const void *from, size_t count) +void _memcpy_toio(volatile void __iomem *to, const void *from, size_t count) { const unsigned char *f = from; while (count) { @@ -37,7 +37,7 @@ void _memcpy_toio(void __iomem *to, const void *from, size_t count) * "memset" on IO memory space. * This needs to be optimized. */ -void _memset_io(void __iomem *dst, int c, size_t count) +void _memset_io(volatile void __iomem *dst, int c, size_t count) { while (count) { count--; diff --git a/arch/arm/kernel/semaphore.c b/arch/arm/kernel/semaphore.c index ac423e3e224..4c31f292305 100644 --- a/arch/arm/kernel/semaphore.c +++ b/arch/arm/kernel/semaphore.c @@ -178,7 +178,7 @@ int __down_trylock(struct semaphore * sem) * registers (r0 to r3 and lr), but not ip, as we use it as a return * value in some cases.. */ -asm(" .section .sched.text,\"ax\" \n\ +asm(" .section .sched.text,\"ax\",%progbits \n\ .align 5 \n\ .globl __down_failed \n\ __down_failed: \n\ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4554c961251..e7d22dbcb69 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -624,6 +624,9 @@ void __attribute__((noreturn)) __bug(const char *file, int line, void *data) printk(" - extra data = %p", data); printk("\n"); *(int *)0 = 0; + + /* Avoid "noreturn function does return" */ + for (;;); } EXPORT_SYMBOL(__bug); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index ad2d66c93a5..08e58ecd44b 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,20 +23,20 @@ SECTIONS *(.init.text) _einittext = .; __proc_info_begin = .; - *(.proc.info) + *(.proc.info.init) __proc_info_end = .; __arch_info_begin = .; - *(.arch.info) + *(.arch.info.init) __arch_info_end = .; __tagtable_begin = .; - *(.taglist) + *(.taglist.init) __tagtable_end = .; . = ALIGN(16); __setup_start = .; *(.init.setup) __setup_end = .; __early_begin = .; - *(__early_param) + *(.early_param.init) __early_end = .; __initcall_start = .; *(.initcall1.init) diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index f83a59761e0..3d88da0c287 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -31,6 +31,8 @@ #include <asm/mach/arch.h> +#include <asm/memory.h> + #include "common.h" struct meminfo memmap = { diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c index e6399b06e4a..79236404aec 100644 --- a/arch/arm/mach-imx/leds-mx1ads.c +++ b/arch/arm/mach-imx/leds-mx1ads.c @@ -17,7 +17,6 @@ #include <asm/system.h> #include <asm/io.h> #include <asm/leds.h> -#include <asm/mach-types.h> #include "leds.h" /* diff --git a/arch/arm/mach-iop3xx/common.c b/arch/arm/mach-iop3xx/common.c index bda7394ec06..fdeeef489a7 100644 --- a/arch/arm/mach-iop3xx/common.c +++ b/arch/arm/mach-iop3xx/common.c @@ -27,7 +27,6 @@ unsigned long iop3xx_pcibios_min_mem = 0; /* * Default power-off for EP80219 */ -#include <asm/mach-types.h> static inline void ep80219_send_to_pic(__u8 c) { } diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c index 0039793b694..d67ac0e5d43 100644 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ b/arch/arm/mach-iop3xx/iop321-time.c @@ -23,7 +23,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> -#include <asm/mach-types.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c index 8eddfac7e2b..3c1f0ebbd63 100644 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ b/arch/arm/mach-iop3xx/iop331-time.c @@ -23,7 +23,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> -#include <asm/mach-types.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c index b01042f7de7..55992ab586b 100644 --- a/arch/arm/mach-iop3xx/iq31244-mm.c +++ b/arch/arm/mach-iop3xx/iq31244-mm.c @@ -21,7 +21,6 @@ #include <asm/page.h> #include <asm/mach/map.h> -#include <asm/mach-types.h> /* diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c index 1580c7ed2b9..bb3e9e5a9af 100644 --- a/arch/arm/mach-iop3xx/iq80321-mm.c +++ b/arch/arm/mach-iop3xx/iq80321-mm.c @@ -21,7 +21,6 @@ #include <asm/page.h> #include <asm/mach/map.h> -#include <asm/mach-types.h> /* diff --git a/arch/arm/mach-iop3xx/iq80331-mm.c b/arch/arm/mach-iop3xx/iq80331-mm.c index ee8c333e115..129eb49b067 100644 --- a/arch/arm/mach-iop3xx/iq80331-mm.c +++ b/arch/arm/mach-iop3xx/iq80331-mm.c @@ -21,7 +21,6 @@ #include <asm/page.h> #include <asm/mach/map.h> -#include <asm/mach-types.h> /* diff --git a/arch/arm/mach-iop3xx/iq80332-mm.c b/arch/arm/mach-iop3xx/iq80332-mm.c index 084afcdfb1e..2feaf7591f5 100644 --- a/arch/arm/mach-iop3xx/iq80332-mm.c +++ b/arch/arm/mach-iop3xx/iq80332-mm.c @@ -21,7 +21,6 @@ #include <asm/page.h> #include <asm/mach/map.h> -#include <asm/mach-types.h> /* diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 74bd2fd602d..f4d7f1f6ef8 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -30,7 +30,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/hardware.h> -#include <asm/mach-types.h> #include <asm/irq.h> #include <asm/system.h> #include <asm/tlbflush.h> @@ -168,7 +167,7 @@ static struct plat_serial8250_port ixp2000_serial_port[] = { static struct resource ixp2000_uart_resource = { .start = IXP2000_UART_PHYS_BASE, - .end = IXP2000_UART_PHYS_BASE + 0xffff, + .end = IXP2000_UART_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }; diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 0788fb2b5c1..522205acb31 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -28,7 +28,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/system.h> -#include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 52ad11328e9..36b6045213e 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -125,7 +125,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) } else if (type & IRQT_LOW) { int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP4XX_IRQ_LEVEL; - } + } else + return -EINVAL; ixp4xx_config_irq(irq, irq_type); @@ -142,6 +143,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) /* Set the new style */ *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); + + return 0; } static void ixp4xx_irq_mask(unsigned int irq) diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index ae1fa099d5f..0a41080d226 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -123,6 +123,7 @@ static void __init ixdp425_init(void) platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices)); } +#ifdef CONFIG_ARCH_IXDP425 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -134,7 +135,9 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif +#ifdef CONFIG_MACH_IXDP465 MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -146,7 +149,9 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif +#ifdef CONFIG_ARCH_PRPMC1100 MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .phys_ram = PHYS_OFFSET, @@ -158,6 +163,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .boot_params = 0x0100, .init_machine = ixdp425_init, MACHINE_END +#endif /* * Avila is functionally equivalent to IXDP425 except that it adds diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c index 2a7fee2a763..5fd8c9f97f9 100644 --- a/arch/arm/mach-l7200/core.c +++ b/arch/arm/mach-l7200/core.c @@ -12,7 +12,6 @@ #include <asm/page.h> #include <asm/mach/map.h> -#include <asm/arch/hardware.h> /* * IRQ base register diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 405a55f2287..3e5f69bb5ac 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -20,40 +20,66 @@ config ARCH_PXA_IDP select PXA25x config PXA_SHARPSL - bool "SHARP SL-5600 and SL-C7xx Models" - select PXA25x + bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP select SHARP_PARAM help Say Y here if you intend to run this kernel on a - Sharp SL-5600 (Poodle), Sharp SL-C700 (Corgi), - SL-C750 (Shepherd) or a Sharp SL-C760 (Husky) - handheld computer. + Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), + SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), + SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. endchoice +if PXA_SHARPSL + +choice + prompt "Select target Sharp Zaurus device range" + +config PXA_SHARPSL_25x + bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + select PXA25x + +config PXA_SHARPSL_27x + bool "Sharp PXA270 models (SL-Cxx00)" + select PXA27x + +endchoice + +endif + endmenu config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select SHARP_LOCOMO config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx +config MACH_SPITZ + bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + +config MACH_BORZOI + bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + config PXA25x bool help @@ -74,4 +100,9 @@ config PXA_SHARP_C7xx help Enable support for all Sharp C7xx models +config PXA_SHARP_Cxx00 + bool + help + Enable common support for Sharp Cxx00 models + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 33dae99ec2d..f609a0f232c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o # Support for blinky lights diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 07b5dd45356..be37586cb1b 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -41,6 +41,7 @@ #include <asm/hardware/scoop.h> #include "generic.h" +#include "sharpsl.h" /* @@ -94,14 +95,30 @@ struct platform_device corgissp_device = { .id = -1, }; +struct corgissp_machinfo corgi_ssp_machinfo = { + .port = 1, + .cs_lcdcon = CORGI_GPIO_LCDCON_CS, + .cs_ads7846 = CORGI_GPIO_ADS7846_CS, + .cs_max1111 = CORGI_GPIO_MAX1111_CS, + .clk_lcdcon = 76, + .clk_ads7846 = 2, + .clk_max1111 = 8, +}; + /* * Corgi Backlight Device */ +static struct corgibl_machinfo corgi_bl_machinfo = { + .max_intensity = 0x2f, + .set_bl_intensity = corgi_bl_set_intensity, +}; + static struct platform_device corgibl_device = { .name = "corgi-bl", .dev = { .parent = &corgifb_device.dev, + .platform_data = &corgi_bl_machinfo, }, .id = -1, }; @@ -119,12 +136,29 @@ static struct platform_device corgikbd_device = { /* * Corgi Touch Screen Device */ +static struct resource corgits_resources[] = { + [0] = { + .start = CORGI_IRQ_GPIO_TP_INT, + .end = CORGI_IRQ_GPIO_TP_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct corgits_machinfo corgi_ts_machinfo = { + .get_hsync_len = corgi_get_hsync_len, + .put_hsync = corgi_put_hsync, + .wait_hsync = corgi_wait_hsync, +}; + static struct platform_device corgits_device = { .name = "corgi-ts", .dev = { .parent = &corgissp_device.dev, + .platform_data = &corgi_ts_machinfo, }, .id = -1, + .num_resources = ARRAY_SIZE(corgits_resources), + .resource = corgits_resources, }; @@ -164,13 +198,10 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __FUNCTION__); + if (( 1 << vdd) & p_d->ocr_mask) GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - } else { - printk(KERN_DEBUG "%s: off\n", __FUNCTION__); + else GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - } } static int corgi_mci_get_ro(struct device *dev) @@ -225,7 +256,20 @@ static struct platform_device *devices[] __initdata = { static void __init corgi_init(void) { + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x0158C000; + PGSR1 = 0x00FF0080; + PGSR2 = 0x0001C004; + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR |= PCFR_OPDE; + + corgi_ssp_set_machinfo(&corgi_ssp_machinfo); + pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); @@ -248,42 +292,14 @@ static void __init fixup_corgi(struct machine_desc *desc, mi->bank[0].size = (64*1024*1024); } -static void __init corgi_init_irq(void) -{ - pxa_init_irq(); -} - -static struct map_desc corgi_io_desc[] __initdata = { -/* virtual physical length */ -/* { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */ -/* { 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/ /* SCOOP */ - { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ -}; - -static void __init corgi_map_io(void) -{ - pxa_map_io(); - iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc)); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x0158C000; - PGSR1 = 0x00FF0080; - PGSR2 = 0x0001C004; - /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ - PCFR |= PCFR_OPDE; -} - #ifdef CONFIG_MACH_CORGI MACHINE_START(CORGI, "SHARP Corgi") .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -295,8 +311,8 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -308,8 +324,8 @@ MACHINE_START(HUSKY, "SHARP Husky") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index deac29c0029..c02ef7c0f7e 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -1,10 +1,14 @@ /* * linux/drivers/video/w100fb.c * - * Corgi LCD Specific Code for ATI Imageon w100 (Wallaby) + * Corgi/Spitz LCD Specific Code * * Copyright (C) 2005 Richard Purdie * + * Connectivity: + * Corgi - LCD to ATI Imageon w100 (Wallaby) + * Spitz - LCD to PXA Framebuffer + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -14,9 +18,16 @@ #include <linux/delay.h> #include <linux/kernel.h> #include <linux/device.h> +#include <linux/module.h> +#include <asm/arch/akita.h> #include <asm/arch/corgi.h> +#include <asm/arch/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/sharpsl.h> +#include <asm/arch/spitz.h> +#include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> -#include <video/w100fb.h> +#include "generic.h" /* Register Addresses */ #define RESCTL_ADRS 0x00 @@ -134,10 +145,10 @@ static void lcdtg_set_common_voltage(u8 base_data, u8 data) } /* Set Phase Adjuct */ -static void lcdtg_set_phadadj(struct w100fb_par *par) +static void lcdtg_set_phadadj(int mode) { int adj; - switch(par->xres) { + switch(mode) { case 480: case 640: /* Setting for VGA */ @@ -161,7 +172,7 @@ static void lcdtg_set_phadadj(struct w100fb_par *par) static int lcd_inited; -static void lcdtg_hw_init(struct w100fb_par *par) +static void lcdtg_hw_init(int mode) { if (!lcd_inited) { int comadj; @@ -215,7 +226,7 @@ static void lcdtg_hw_init(struct w100fb_par *par) corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); /* Set Phase Adjuct */ - lcdtg_set_phadadj(par); + lcdtg_set_phadadj(mode); /* Initialize for Input Signals from ATI */ corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE @@ -224,10 +235,10 @@ static void lcdtg_hw_init(struct w100fb_par *par) lcd_inited=1; } else { - lcdtg_set_phadadj(par); + lcdtg_set_phadadj(mode); } - switch(par->xres) { + switch(mode) { case 480: case 640: /* Set Lcd Resolution (VGA) */ @@ -242,7 +253,7 @@ static void lcdtg_hw_init(struct w100fb_par *par) } } -static void lcdtg_suspend(struct w100fb_par *par) +static void lcdtg_suspend(void) { /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ mdelay(34); @@ -276,15 +287,30 @@ static void lcdtg_suspend(struct w100fb_par *par) lcd_inited = 0; } -static struct w100_tg_info corgi_lcdtg_info = { - .change=lcdtg_hw_init, - .suspend=lcdtg_suspend, - .resume=lcdtg_hw_init, -}; /* * Corgi w100 Frame Buffer Device */ +#ifdef CONFIG_PXA_SHARP_C7xx + +#include <video/w100fb.h> + +static void w100_lcdtg_suspend(struct w100fb_par *par) +{ + lcdtg_suspend(); +} + +static void w100_lcdtg_init(struct w100fb_par *par) +{ + lcdtg_hw_init(par->xres); +} + + +static struct w100_tg_info corgi_lcdtg_info = { + .change = w100_lcdtg_init, + .suspend = w100_lcdtg_suspend, + .resume = w100_lcdtg_init, +}; static struct w100_mem_info corgi_fb_mem = { .ext_cntl = 0x00040003, @@ -394,3 +420,145 @@ struct platform_device corgifb_device = { }, }; +#endif + + +/* + * Spitz PXA Frame Buffer Device + */ +#ifdef CONFIG_PXA_SHARP_Cxx00 + +#include <asm/arch/pxafb.h> + +void spitz_lcd_power(int on) +{ + if (on) + lcdtg_hw_init(480); + else + lcdtg_suspend(); +} + +#endif + + +/* + * Corgi/Spitz Touchscreen to LCD interface + */ +static unsigned long (*get_hsync_time)(struct device *dev); + +static void inline sharpsl_wait_sync(int gpio) +{ + while((GPLR(gpio) & GPIO_bit(gpio)) == 0); + while((GPLR(gpio) & GPIO_bit(gpio)) != 0); +} + +#ifdef CONFIG_PXA_SHARP_C7xx +unsigned long corgi_get_hsync_len(void) +{ + if (!get_hsync_time) + get_hsync_time = symbol_get(w100fb_get_hsynclen); + if (!get_hsync_time) + return 0; + + return get_hsync_time(&corgifb_device.dev); +} + +void corgi_put_hsync(void) +{ + if (get_hsync_time) + symbol_put(w100fb_get_hsynclen); +} + +void corgi_wait_hsync(void) +{ + sharpsl_wait_sync(CORGI_GPIO_HSYNC); +} +#endif + +#ifdef CONFIG_PXA_SHARP_Cxx00 +unsigned long spitz_get_hsync_len(void) +{ + if (!get_hsync_time) + get_hsync_time = symbol_get(pxafb_get_hsync_time); + if (!get_hsync_time) + return 0; + + return pxafb_get_hsync_time(&pxafb_device.dev); +} + +void spitz_put_hsync(void) +{ + if (get_hsync_time) + symbol_put(pxafb_get_hsync_time); +} + +void spitz_wait_hsync(void) +{ + sharpsl_wait_sync(SPITZ_GPIO_HSYNC); +} +#endif + +/* + * Corgi/Spitz Backlight Power + */ +#ifdef CONFIG_PXA_SHARP_C7xx +void corgi_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via SCOOP */ + if (intensity & 0x0020) + set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); + else + reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); +} +#endif + + +#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) +void spitz_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via SCOOP */ + if (intensity & 0x0020) + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); + else + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); + + if (intensity) + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); + else + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); +} +#endif + +#ifdef CONFIG_MACH_AKITA +void akita_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via IO-Expander */ + if (intensity & 0x0020) + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); + else + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); + + if (intensity) + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); + else + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); +} +#endif diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 366a9bde3d8..0ef42828705 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -1,7 +1,7 @@ /* * SSP control code for Sharp Corgi devices * - * Copyright (c) 2004 Richard Purdie + * Copyright (c) 2004-2005 Richard Purdie * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,14 +17,16 @@ #include <linux/delay.h> #include <linux/device.h> #include <asm/hardware.h> +#include <asm/mach-types.h> #include <asm/arch/ssp.h> -#include <asm/arch/corgi.h> #include <asm/arch/pxa-regs.h> +#include "sharpsl.h" static DEFINE_SPINLOCK(corgi_ssp_lock); static struct ssp_dev corgi_ssp_dev; static struct ssp_state corgi_ssp_state; +static struct corgissp_machinfo *ssp_machinfo; /* * There are three devices connected to the SSP interface: @@ -48,12 +50,12 @@ unsigned long corgi_ssp_ads7846_putget(ulong data) unsigned long ret,flag; spin_lock_irqsave(&corgi_ssp_lock, flag); - GPCR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); + GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); ssp_write_word(&corgi_ssp_dev,data); ret = ssp_read_word(&corgi_ssp_dev); - GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); spin_unlock_irqrestore(&corgi_ssp_lock, flag); return ret; @@ -66,12 +68,12 @@ unsigned long corgi_ssp_ads7846_putget(ulong data) void corgi_ssp_ads7846_lock(void) { spin_lock(&corgi_ssp_lock); - GPCR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); + GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); } void corgi_ssp_ads7846_unlock(void) { - GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); spin_unlock(&corgi_ssp_lock); } @@ -97,23 +99,27 @@ EXPORT_SYMBOL(corgi_ssp_ads7846_get); */ unsigned long corgi_ssp_dac_put(ulong data) { - unsigned long flag; + unsigned long flag, sscr1 = SSCR1_SPH; spin_lock_irqsave(&corgi_ssp_lock, flag); - GPCR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); + + if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) + sscr1 = 0; ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), SSCR1_SPH, 0, SSCR0_SerClkDiv(76)); + ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); ssp_enable(&corgi_ssp_dev); + GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); ssp_write_word(&corgi_ssp_dev,data); /* Read null data back from device to prevent SSP overflow */ ssp_read_word(&corgi_ssp_dev); + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(2)); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); ssp_enable(&corgi_ssp_dev); - GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); + spin_unlock_irqrestore(&corgi_ssp_lock, flag); return 0; @@ -141,9 +147,9 @@ int corgi_ssp_max1111_get(ulong data) int voltage,voltage1,voltage2; spin_lock_irqsave(&corgi_ssp_lock, flag); - GPCR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); + GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(8)); + ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); ssp_enable(&corgi_ssp_dev); udelay(1); @@ -161,9 +167,9 @@ int corgi_ssp_max1111_get(ulong data) voltage2=ssp_read_word(&corgi_ssp_dev); ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(2)); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); ssp_enable(&corgi_ssp_dev); - GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); spin_unlock_irqrestore(&corgi_ssp_lock, flag); if (voltage1 & 0xc0 || voltage2 & 0x3f) @@ -179,25 +185,31 @@ EXPORT_SYMBOL(corgi_ssp_max1111_get); /* * Support Routines */ -int __init corgi_ssp_probe(struct device *dev) + +void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) +{ + ssp_machinfo = machinfo; +} + +static int __init corgi_ssp_probe(struct device *dev) { int ret; /* Chip Select - Disable All */ - GPDR0 |= GPIO_bit(CORGI_GPIO_LCDCON_CS); /* output */ - GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); /* High - Disable LCD Control/Timing Gen */ - GPDR0 |= GPIO_bit(CORGI_GPIO_MAX1111_CS); /* output */ - GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); /* High - Disable MAX1111*/ - GPDR0 |= GPIO_bit(CORGI_GPIO_ADS7846_CS); /* output */ - GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); /* High - Disable ADS7846*/ + GPDR(ssp_machinfo->cs_lcdcon) |= GPIO_bit(ssp_machinfo->cs_lcdcon); /* output */ + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + GPDR(ssp_machinfo->cs_max1111) |= GPIO_bit(ssp_machinfo->cs_max1111); /* output */ + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846); /* output */ + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ret=ssp_init(&corgi_ssp_dev,1); + ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port); if (ret) printk(KERN_ERR "Unable to register SSP handler!\n"); else { ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(2)); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); ssp_enable(&corgi_ssp_dev); } @@ -222,9 +234,9 @@ static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level) static int corgi_ssp_resume(struct device *dev, u32 level) { if (level == RESUME_POWER_ON) { - GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); /* High - Disable LCD Control/Timing Gen */ - GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); /* High - Disable MAX1111*/ - GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); /* High - Disable ADS7846*/ + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); ssp_enable(&corgi_ssp_dev); } diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index a45aaa115a7..d0660a8c4b7 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -34,6 +34,7 @@ #include <asm/arch/udc.h> #include <asm/arch/pxafb.h> #include <asm/arch/mmc.h> +#include <asm/arch/i2c.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 923f6eb774c..1f38033921e 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -146,6 +146,11 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software }; +static struct platform_device lub_audio_device = { + .name = "pxa2xx-ac97", + .id = -1, +}; + static struct resource sa1111_resources[] = { [0] = { .start = 0x10000000, @@ -195,6 +200,7 @@ static struct platform_device smc91x_device = { static struct platform_device *devices[] __initdata = { &sa1111_device, + &lub_audio_device, &smc91x_device, }; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 47cfb8bb831..f2563881001 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -30,6 +30,8 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/irq.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> #include <asm/arch/poodle.h> #include <asm/arch/pxafb.h> @@ -93,6 +95,83 @@ static struct platform_device locomo_device = { .resource = locomo_resources, }; + +/* + * MMC/SD Device + * + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert/eject. + */ +static struct pxamci_platform_data poodle_mci_platform_data; + +static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN); + pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT); + + poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, SA_INTERRUPT, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(POODLE_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void poodle_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) + GPSR1 = GPIO_bit(POODLE_GPIO_SD_PWR); + else + GPCR1 = GPIO_bit(POODLE_GPIO_SD_PWR); +} + +static void poodle_mci_exit(struct device *dev, void *data) +{ + free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data poodle_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = poodle_mci_init, + .setpower = poodle_mci_setpower, + .exit = poodle_mci_exit, +}; + + +/* + * USB Device Controller + */ +static void poodle_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP); + break; + } +} + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + /* no connect GPIO; poodle can't tell connection status */ + .udc_command = poodle_udc_command, +}; + + /* PXAFB device */ static struct pxafb_mach_info poodle_fb_info __initdata = { .pixclock = 144700, @@ -126,6 +205,15 @@ static void __init poodle_init(void) { int ret = 0; + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x00008000; + PGSR1 = 0x003F0202; + PGSR2 = 0x0001C000; + PCFR |= PCFR_OPDE; + /* cpu initialize */ /* Pgsr Register */ PGSR0 = 0x0146dd80; @@ -155,6 +243,9 @@ static void __init poodle_init(void) GPSR2 = 0x00000000; set_pxa_fb_info(&poodle_fb_info); + pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT); + pxa_set_udc_info(&udc_info); + pxa_set_mci_info(&poodle_mci_platform_data); scoop_num = 1; scoop_devs = &poodle_pcmcia_scoop[0]; @@ -171,32 +262,12 @@ static void __init fixup_poodle(struct machine_desc *desc, sharpsl_save_param(); } -static struct map_desc poodle_io_desc[] __initdata = { - /* virtual physical length */ - { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ -}; - -static void __init poodle_map_io(void) -{ - pxa_map_io(); - iotable_init(poodle_io_desc, ARRAY_SIZE(poodle_io_desc)); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x00008000; - PGSR1 = 0x003F0202; - PGSR2 = 0x0001C000; - PCFR |= PCFR_OPDE; -} - MACHINE_START(POODLE, "SHARP Poodle") .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_poodle, - .map_io = poodle_map_io, + .map_io = pxa_map_io, .init_irq = pxa_init_irq, .timer = &pxa_timer, .init_machine = poodle_init, diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h new file mode 100644 index 00000000000..3977a77aacd --- /dev/null +++ b/arch/arm/mach-pxa/sharpsl.h @@ -0,0 +1,34 @@ +/* + * SharpSL SSP Driver + */ + +struct corgissp_machinfo { + int port; + int cs_lcdcon; + int cs_ads7846; + int cs_max1111; + int clk_lcdcon; + int clk_ads7846; + int clk_max1111; +}; + +void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo); + +/* + * SharpSL Backlight + */ + +void corgi_bl_set_intensity(int intensity); +void spitz_bl_set_intensity(int intensity); +void akita_bl_set_intensity(int intensity); + +/* + * SharpSL Touchscreen Driver + */ + +unsigned long corgi_get_hsync_len(void); +unsigned long spitz_get_hsync_len(void); +void corgi_put_hsync(void); +void spitz_put_hsync(void); +void corgi_wait_hsync(void); +void spitz_wait_hsync(void); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c new file mode 100644 index 00000000000..568afe3d6e1 --- /dev/null +++ b/arch/arm/mach-pxa/spitz.c @@ -0,0 +1,380 @@ +/* + * Support for Sharp SL-Cxx00 Series of PDAs + * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi) + * + * Copyright (c) 2005 Richard Purdie + * + * Based on Sharp's 2.4 kernel patches/lubbock.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/mmc/host.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/irq.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> +#include <asm/arch/ohci.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/akita.h> +#include <asm/arch/spitz.h> +#include <asm/arch/sharpsl.h> + +#include <asm/mach/sharpsl_param.h> +#include <asm/hardware/scoop.h> + +#include "generic.h" +#include "sharpsl.h" + +/* + * Spitz SCOOP Device #1 + */ +static struct resource spitz_scoop_resources[] = { + [0] = { + .start = 0x10800000, + .end = 0x10800fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config spitz_scoop_setup = { + .io_dir = SPITZ_SCP_IO_DIR, + .io_out = SPITZ_SCP_IO_OUT, + .suspend_clr = SPITZ_SCP_SUS_CLR, + .suspend_set = SPITZ_SCP_SUS_SET, +}; + +struct platform_device spitzscoop_device = { + .name = "sharp-scoop", + .id = 0, + .dev = { + .platform_data = &spitz_scoop_setup, + }, + .num_resources = ARRAY_SIZE(spitz_scoop_resources), + .resource = spitz_scoop_resources, +}; + +/* + * Spitz SCOOP Device #2 + */ +static struct resource spitz_scoop2_resources[] = { + [0] = { + .start = 0x08800040, + .end = 0x08800fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config spitz_scoop2_setup = { + .io_dir = SPITZ_SCP2_IO_DIR, + .io_out = SPITZ_SCP2_IO_OUT, + .suspend_clr = SPITZ_SCP2_SUS_CLR, + .suspend_set = SPITZ_SCP2_SUS_SET, +}; + +struct platform_device spitzscoop2_device = { + .name = "sharp-scoop", + .id = 1, + .dev = { + .platform_data = &spitz_scoop2_setup, + }, + .num_resources = ARRAY_SIZE(spitz_scoop2_resources), + .resource = spitz_scoop2_resources, +}; + +static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { +{ + .dev = &spitzscoop_device.dev, + .irq = SPITZ_IRQ_GPIO_CF_IRQ, + .cd_irq = SPITZ_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +},{ + .dev = &spitzscoop2_device.dev, + .irq = SPITZ_IRQ_GPIO_CF2_IRQ, + .cd_irq = -1, +}, +}; + + +/* + * Spitz SSP Device + * + * Set the parent as the scoop device because a lot of SSP devices + * also use scoop functions and this makes the power up/down order + * work correctly. + */ +struct platform_device spitzssp_device = { + .name = "corgi-ssp", + .dev = { + .parent = &spitzscoop_device.dev, + }, + .id = -1, +}; + +struct corgissp_machinfo spitz_ssp_machinfo = { + .port = 2, + .cs_lcdcon = SPITZ_GPIO_LCDCON_CS, + .cs_ads7846 = SPITZ_GPIO_ADS7846_CS, + .cs_max1111 = SPITZ_GPIO_MAX1111_CS, + .clk_lcdcon = 520, + .clk_ads7846 = 14, + .clk_max1111 = 56, +}; + + +/* + * Spitz Backlight Device + */ +static struct corgibl_machinfo spitz_bl_machinfo = { + .max_intensity = 0x2f, +}; + +static struct platform_device spitzbl_device = { + .name = "corgi-bl", + .dev = { + .platform_data = &spitz_bl_machinfo, + }, + .id = -1, +}; + + +/* + * Spitz Keyboard Device + */ +static struct platform_device spitzkbd_device = { + .name = "spitz-keyboard", + .id = -1, +}; + + +/* + * Spitz Touch Screen Device + */ +static struct resource spitzts_resources[] = { + [0] = { + .start = SPITZ_IRQ_GPIO_TP_INT, + .end = SPITZ_IRQ_GPIO_TP_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct corgits_machinfo spitz_ts_machinfo = { + .get_hsync_len = spitz_get_hsync_len, + .put_hsync = spitz_put_hsync, + .wait_hsync = spitz_wait_hsync, +}; + +static struct platform_device spitzts_device = { + .name = "corgi-ts", + .dev = { + .parent = &spitzssp_device.dev, + .platform_data = &spitz_ts_machinfo, + }, + .id = -1, + .num_resources = ARRAY_SIZE(spitzts_resources), + .resource = spitzts_resources, +}; + + +/* + * MMC/SD Device + * + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert/eject. + */ + +static struct pxamci_platform_data spitz_mci_platform_data; + +static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA27x MMC controller */ + pxa_gpio_mode(GPIO32_MMCCLK_MD); + pxa_gpio_mode(GPIO112_MMCCMD_MD); + pxa_gpio_mode(GPIO92_MMCDAT0_MD); + pxa_gpio_mode(GPIO109_MMCDAT1_MD); + pxa_gpio_mode(GPIO110_MMCDAT2_MD); + pxa_gpio_mode(GPIO111_MMCDAT3_MD); + pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN); + pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN); + + spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, SA_INTERRUPT, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(SPITZ_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +/* Power control is shared with one of the CF slots so we have a mess */ +static void spitz_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + + if (( 1 << vdd) & p_d->ocr_mask) { + /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */ + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + mdelay(2); + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04); + } else { + /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */ + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04); + + if (!(cpr | 0x02)) { + mdelay(1); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } + } +} + +static int spitz_mci_get_ro(struct device *dev) +{ + return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP); +} + +static void spitz_mci_exit(struct device *dev, void *data) +{ + free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data spitz_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = spitz_mci_init, + .get_ro = spitz_mci_get_ro, + .setpower = spitz_mci_setpower, + .exit = spitz_mci_exit, +}; + + +/* + * Spitz PXA Framebuffer + */ +static struct pxafb_mach_info spitz_pxafb_info __initdata = { + .pixclock = 19231, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 40, + .left_margin = 46, + .right_margin = 125, + .vsync_len = 3, + .upper_margin = 1, + .lower_margin = 0, + .sync = 0, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM, + .lccr3 = LCCR3_PixRsEdg | LCCR3_OutEnH, + .pxafb_lcd_power = spitz_lcd_power, +}; + + +static struct platform_device *devices[] __initdata = { + &spitzscoop_device, + &spitzssp_device, + &spitzkbd_device, + &spitzts_device, + &spitzbl_device, + &spitzbattery_device, +}; + +static void __init common_init(void) +{ + PMCR = 0x00; + + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x0158C000; + PGSR1 = 0x00FF0080; + PGSR2 = 0x0001C004; + + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR |= PCFR_OPDE; + + corgi_ssp_set_machinfo(&spitz_ssp_machinfo); + + pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_mci_info(&spitz_mci_platform_data); + pxafb_device.dev.parent = &spitzssp_device.dev; + set_pxa_fb_info(&spitz_pxafb_info); +} + +static void __init spitz_init(void) +{ + scoop_num = 2; + scoop_devs = &spitz_pcmcia_scoop[0]; + spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; + + common_init(); + + platform_device_register(&spitzscoop2_device); +} + +static void __init fixup_spitz(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + sharpsl_save_param(); + mi->nr_banks = 1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); +} + +#ifdef CONFIG_MACH_SPITZ +MACHINE_START(SPITZ, "SHARP Spitz") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_spitz, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = spitz_init, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_BORZOI +MACHINE_START(BORZOI, "SHARP Borzoi") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_spitz, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = spitz_init, + .timer = &pxa_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index f87aa0b669a..7c05f27fe1d 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -12,6 +12,7 @@ * * Modifications: * 02-May-2005 BJD Copied from mach-bast.c + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -232,7 +233,7 @@ static struct s3c24xx_board anubis_board __initdata = { .clocks_count = ARRAY_SIZE(anubis_clocks) }; -void __init anubis_map_io(void) +static void __init anubis_map_io(void) { /* initialise the clocks */ diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 1a3367da640..ed1f07d7252 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -31,6 +31,7 @@ * 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s * 25-Jul-2005 BJD Removed ASIX static mappings * 27-Jul-2005 BJD Ensure maximum frequency of i2c bus + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -428,7 +429,7 @@ static struct s3c24xx_board bast_board __initdata = { .clocks_count = ARRAY_SIZE(bast_clocks) }; -void __init bast_map_io(void) +static void __init bast_map_io(void) { /* initialise the clocks */ diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 6ff1889fbd2..fb3cb01266e 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -24,6 +24,7 @@ * 10-Jan-2005 BJD Removed include of s3c2410.h * 14-Jan-2005 BJD Added clock init * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -147,7 +148,7 @@ static struct s3c24xx_board h1940_board __initdata = { .devices_count = ARRAY_SIZE(h1940_devices) }; -void __init h1940_map_io(void) +static void __init h1940_map_io(void) { s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); s3c24xx_init_clocks(0); @@ -155,13 +156,13 @@ void __init h1940_map_io(void) s3c24xx_set_board(&h1940_board); } -void __init h1940_init_irq(void) +static void __init h1940_init_irq(void) { s3c24xx_init_irq(); } -void __init h1940_init(void) +static void __init h1940_init(void) { set_s3c2410fb_info(&h1940_lcdcfg); } diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 66bf5bb2b3d..5c0f2b091f9 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -97,7 +97,7 @@ static struct s3c24xx_board n30_board __initdata = { .devices_count = ARRAY_SIZE(n30_devices) }; -void __init n30_map_io(void) +static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); s3c24xx_init_clocks(0); @@ -105,14 +105,14 @@ void __init n30_map_io(void) s3c24xx_set_board(&n30_board); } -void __init n30_init_irq(void) +static void __init n30_init_irq(void) { s3c24xx_init_irq(); } /* GPB3 is the line that controls the pull-up for the USB D+ line */ -void __init n30_init(void) +static void __init n30_init(void) { s3c_device_i2c.dev.platform_data = &n30_i2ccfg; diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c index d24c242414c..c22f8216032 100644 --- a/arch/arm/mach-s3c2410/mach-nexcoder.c +++ b/arch/arm/mach-s3c2410/mach-nexcoder.c @@ -136,7 +136,7 @@ static void __init nexcoder_sensorboard_init(void) s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN } -void __init nexcoder_map_io(void) +static void __init nexcoder_map_io(void) { s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index d901ed492ff..ad1459e402e 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -105,7 +105,7 @@ static struct s3c24xx_board otom11_board __initdata = { }; -void __init otom11_map_io(void) +static void __init otom11_map_io(void) { s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index a73d61c1de4..22d9e070fd6 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -16,6 +16,7 @@ * 14-Jan-2005 BJD Added new clock init * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2005 BJD Fixed __iomem warnings + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -108,7 +109,7 @@ static struct s3c24xx_board rx3715_board __initdata = { .devices_count = ARRAY_SIZE(rx3715_devices) }; -void __init rx3715_map_io(void) +static void __init rx3715_map_io(void) { s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); @@ -116,7 +117,7 @@ void __init rx3715_map_io(void) s3c24xx_set_board(&rx3715_board); } -void __init rx3715_init_irq(void) +static void __init rx3715_init_irq(void) { s3c24xx_init_irq(); } diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 67e903a700d..2eda55a6b67 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -28,6 +28,7 @@ * Ben Dooks <ben@simtec.co.uk> * * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA + * 20-Sep-2005 BJD Added static to non-exported items * ***********************************************************************/ @@ -97,7 +98,7 @@ static struct s3c24xx_board smdk2410_board __initdata = { .devices_count = ARRAY_SIZE(smdk2410_devices) }; -void __init smdk2410_map_io(void) +static void __init smdk2410_map_io(void) { s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); s3c24xx_init_clocks(0); @@ -105,7 +106,7 @@ void __init smdk2410_map_io(void) s3c24xx_set_board(&smdk2410_board); } -void __init smdk2410_init_irq(void) +static void __init smdk2410_init_irq(void) { s3c24xx_init_irq(); } diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index 357522106f6..722ef46b630 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -18,6 +18,7 @@ * 22-Feb-2005 BJD Updated for 2.6.11-rc5 relesa * 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA * 14-Mar-2005 BJD void __iomem fixes + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -98,7 +99,7 @@ static struct s3c24xx_board smdk2440_board __initdata = { .devices_count = ARRAY_SIZE(smdk2440_devices) }; -void __init smdk2440_map_io(void) +static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); s3c24xx_init_clocks(16934400); @@ -106,7 +107,7 @@ void __init smdk2440_map_io(void) s3c24xx_set_board(&smdk2440_board); } -void __init smdk2440_machine_init(void) +static void __init smdk2440_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 8f9ab2893df..663a7f98fc0 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -28,6 +28,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2006 BJD void __iomem fixes * 22-Jun-2006 BJD Added DM9000 platform information + * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> @@ -347,7 +348,7 @@ static void vr1000_power_off(void) s3c2410_gpio_setpin(S3C2410_GPB9, 1); } -void __init vr1000_map_io(void) +static void __init vr1000_map_io(void) { /* initialise clock sources */ diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index f021fd82be5..5098b50158a 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -40,7 +40,6 @@ #include <asm/hardware.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/mach-types.h> #include "devs.h" #include "usb-simtec.h" diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 8cb69113a57..25d6a4e2753 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -111,12 +111,11 @@ static struct mtd_partition collie_partitions[] = { static void collie_set_vpp(int vpp) { - write_scoop_reg(SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN); - if (vpp) { - write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN); - } else { - write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN); - } + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN); + if (vpp) + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN); + else + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN); } static struct flash_platform_data collie_flash_data = { diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 279e3afa3c3..f085d68e568 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -39,3 +39,6 @@ extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops); struct irda_platform_data; void sa11x0_set_irda_data(struct irda_platform_data *irda); + +struct mcp_plat_data; +void sa11x0_set_mcp_data(struct mcp_plat_data *data); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 3c8862fde51..a30e0451df7 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/leds.h> -#include <asm/mach-types.h> #include <asm/hardware/amba.h> #include <asm/hardware/amba_clcd.h> #include <asm/hardware/arm_timer.h> @@ -52,8 +51,9 @@ * * Setup a VA for the Versatile Vectored Interrupt Controller. */ -#define VA_VIC_BASE IO_ADDRESS(VERSATILE_VIC_BASE) -#define VA_SIC_BASE IO_ADDRESS(VERSATILE_SIC_BASE) +#define __io_address(n) __io(IO_ADDRESS(n)) +#define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) +#define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) static void vic_mask_irq(unsigned int irq) { @@ -214,7 +214,7 @@ void __init versatile_map_io(void) iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); } -#define VERSATILE_REFCOUNTER (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) +#define VERSATILE_REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) /* * This is the Versatile sched_clock implementation. This has @@ -231,7 +231,7 @@ unsigned long long sched_clock(void) } -#define VERSATILE_FLASHCTRL (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET) +#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET) static int versatile_flash_init(void) { @@ -309,7 +309,7 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -#define VERSATILE_SYSMCI (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET) +#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET) unsigned int mmc_status(struct device *dev) { @@ -343,11 +343,11 @@ static const struct icst307_params versatile_oscvco_params = { static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco) { - unsigned long sys_lock = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET; + void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET; #if defined(CONFIG_ARCH_VERSATILE_PB) - unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET; + void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET; #elif defined(CONFIG_MACH_VERSATILE_AB) - unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET; + void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET; #endif u32 val; @@ -483,7 +483,7 @@ static struct clcd_panel epson_2_2_in = { */ static struct clcd_panel *versatile_clcd_panel(void) { - unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; + void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; struct clcd_panel *panel = &vga; u32 val; @@ -510,7 +510,7 @@ static struct clcd_panel *versatile_clcd_panel(void) */ static void versatile_clcd_disable(struct clcd_fb *fb) { - unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; + void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; u32 val; val = readl(sys_clcd); @@ -522,7 +522,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb) * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off */ if (fb->panel == &sanyo_2_5_in) { - unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL); + void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; ctrl = readl(versatile_ib2_ctrl); @@ -537,7 +537,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb) */ static void versatile_clcd_enable(struct clcd_fb *fb) { - unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; + void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; u32 val; val = readl(sys_clcd); @@ -571,7 +571,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on */ if (fb->panel == &sanyo_2_5_in) { - unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL); + void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; ctrl = readl(versatile_ib2_ctrl); @@ -720,7 +720,7 @@ static struct amba_device *amba_devs[] __initdata = { }; #ifdef CONFIG_LEDS -#define VA_LEDS_BASE (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) +#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) static void versatile_leds_event(led_event_t ledevt) { @@ -778,11 +778,11 @@ void __init versatile_init(void) /* * Where is the timer (VA)? */ -#define TIMER0_VA_BASE IO_ADDRESS(VERSATILE_TIMER0_1_BASE) -#define TIMER1_VA_BASE (IO_ADDRESS(VERSATILE_TIMER0_1_BASE) + 0x20) -#define TIMER2_VA_BASE IO_ADDRESS(VERSATILE_TIMER2_3_BASE) -#define TIMER3_VA_BASE (IO_ADDRESS(VERSATILE_TIMER2_3_BASE) + 0x20) -#define VA_IC_BASE IO_ADDRESS(VERSATILE_VIC_BASE) +#define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE) +#define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20) +#define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE) +#define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20) +#define VA_IC_BASE __io_address(VERSATILE_VIC_BASE) /* * How long is the timer interval? @@ -877,12 +877,12 @@ static void __init versatile_timer_init(void) * VERSATILE_REFCLK is 32KHz * VERSATILE_TIMCLK is 1MHz */ - val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE)); + val = readl(__io_address(VERSATILE_SCTL_BASE)); writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, - IO_ADDRESS(VERSATILE_SCTL_BASE)); + __io_address(VERSATILE_SCTL_BASE)); /* * Initialise to a known state (all timers off) diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index d1565e851f0..b80d57d5169 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/mach/pci.h> -#include <asm/mach-types.h> /* * these spaces are mapped using the following base registers: diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 8f76f3df7b4..dbd34603312 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -20,6 +20,11 @@ */ .align 5 ENTRY(v6_early_abort) +#ifdef CONFIG_CPU_MPCORE + clrex +#else + strex r0, r1, [sp] @ Clear the exclusive monitor +#endif mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR /* diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 85c10a71e7c..72966d90e95 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -18,6 +18,7 @@ #define HARVARD_CACHE #define CACHE_LINE_SIZE 32 #define D_CACHE_LINE_SIZE 32 +#define BTB_FLUSH_SIZE 8 /* * v6_flush_cache_all() @@ -98,7 +99,13 @@ ENTRY(v6_coherent_user_range) mcr p15, 0, r0, c7, c5, 1 @ invalidate I line #endif mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #CACHE_LINE_SIZE + add r0, r0, #BTB_FLUSH_SIZE + mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry + add r0, r0, #BTB_FLUSH_SIZE + mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry + add r0, r0, #BTB_FLUSH_SIZE + mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry + add r0, r0, #BTB_FLUSH_SIZE cmp r0, r1 blo 1b #ifdef HARVARD_CACHE diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 0b6c4db44e0..4a884baf3b9 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -233,7 +233,17 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (in_interrupt() || !mm) goto no_context; - down_read(&mm->mmap_sem); + /* + * As per x86, we may deadlock here. However, since the kernel only + * validly references user space from well defined areas of the code, + * we can bug out early if this is from code which shouldn't. + */ + if (!down_read_trylock(&mm->mmap_sem)) { + if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc)) + goto no_context; + down_read(&mm->mmap_sem); + } + fault = __do_page_fault(mm, addr, fsr, tsk); up_read(&mm->mmap_sem); diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index b0208c99257..c9a03981b78 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -17,6 +17,24 @@ #ifdef CONFIG_CPU_CACHE_VIPT +#define ALIAS_FLUSH_START 0xffff4000 + +#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) + +static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) +{ + unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); + + set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL)); + flush_tlb_kernel_page(to); + + asm( "mcrr p15, 0, %1, %0, c14\n" + " mcrr p15, 0, %1, %0, c5\n" + : + : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES) + : "cc"); +} + void flush_cache_mm(struct mm_struct *mm) { if (cache_is_vivt()) { @@ -67,24 +85,6 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig if (cache_is_vipt_aliasing()) flush_pfn_alias(pfn, user_addr); } - -#define ALIAS_FLUSH_START 0xffff4000 - -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - -static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) -{ - unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); - - set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL)); - flush_tlb_kernel_page(to); - - asm( "mcrr p15, 0, %1, %0, c14\n" - " mcrr p15, 0, %1, %0, c5\n" - : - : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES) - : "cc"); -} #else #define flush_pfn_alias(pfn,vaddr) do { } while (0) #endif diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 1d739d282a4..82ec954e45b 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -509,7 +509,7 @@ cpu_arm1020_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1020_proc_info,#object __arm1020_proc_info: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 9b725665b5c..7375fe930f7 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -491,7 +491,7 @@ cpu_arm1020e_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1020e_proc_info,#object __arm1020e_proc_info: diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 37b70fa21c7..6ca639094d6 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -473,7 +473,7 @@ cpu_arm1022_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1022_proc_info,#object __arm1022_proc_info: diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 931b690d1be..10317e4f55d 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -469,7 +469,7 @@ cpu_arm1026_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm1026_proc_info,#object __arm1026_proc_info: diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index d0f1bbb48f6..8e7e1e70ab0 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -332,7 +332,7 @@ cpu_arm710_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm6_proc_info, #object __arm6_proc_info: diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index c69c9de3239..a13e0184d34 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -222,7 +222,7 @@ cpu_arm720_name: * See linux/include/asm-arm/procinfo.h for a definition of this structure. */ - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm710_proc_info, #object __arm710_proc_info: diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 0f490a0fcb7..d1651389999 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -452,7 +452,7 @@ cpu_arm920_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm920_proc_info,#object __arm920_proc_info: diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 62bc34a139e..23b8ed97f4e 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -456,7 +456,7 @@ cpu_arm922_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm922_proc_info,#object __arm922_proc_info: diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index ee49aa2ca78..ee95c52db51 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -521,7 +521,7 @@ cpu_arm925_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm925_proc_info,#object __arm925_proc_info: diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index bb95cc9fed0..7d042dc20c4 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -471,7 +471,7 @@ cpu_arm926_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __arm926_proc_info,#object __arm926_proc_info: diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 34f7e7d3f41..bd330c4075a 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -249,7 +249,7 @@ cpu_sa110_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __sa110_proc_info,#object __sa110_proc_info: diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index ca14f80d5ab..91b89124c0d 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -280,7 +280,7 @@ cpu_sa1110_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __sa1100_proc_info,#object __sa1100_proc_info: diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index eb34823c9db..caf3b19b167 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -240,7 +240,7 @@ cpu_elf_name: .size cpu_elf_name, . - cpu_elf_name .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr /* * Match any ARMv6 processor core. diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index b88de270014..861b3594728 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -578,7 +578,7 @@ cpu_pxa270_name: .align - .section ".proc.info", #alloc, #execinstr + .section ".proc.info.init", #alloc, #execinstr .type __80200_proc_info,#object __80200_proc_info: diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 6cb20aea7f5..02bcc6c1cd1 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -25,7 +25,6 @@ #include <asm/mach/map.h> #include <asm/hardware/clock.h> #include <asm/io.h> -#include <asm/mach-types.h> #include <asm/setup.h> #include <asm/arch/board.h> diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 409aac2c4b9..fd894bb0010 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -21,7 +21,6 @@ #include <linux/err.h> #include <asm/hardware.h> -#include <asm/mach-types.h> #include <asm/io.h> #include <asm/system.h> diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 98f1c76f866..14a836d7ac2 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -33,7 +33,6 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/hardware.h> -#include <asm/mach-types.h> #include <asm/arch/mux.h> #include <asm/arch/usb.h> |