diff options
Diffstat (limited to 'arch/arm')
33 files changed, 3813 insertions, 405 deletions
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 67ea99ef652..dd3fbd6766e 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -33,10 +33,6 @@ __XScale_start: bic r0, r0, #0x1000 @ clear Icache mcr p15, 0, r0, c1, c0, 0 -#ifdef CONFIG_ARCH_COTULLA_IDP - mov r7, #MACH_TYPE_COTULLA_IDP -#endif - #ifdef CONFIG_ARCH_IXP2000 mov r1, #-1 mov r0, #0xd6000000 diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index eb06d0b2cb7..79fa71d990b 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) if (!sachip) return -ENOMEM; - sachip->clk = clk_get(me, "GPIO27_CLK"); + sachip->clk = clk_get(me, "SA1111_CLK"); if (!sachip->clk) { ret = PTR_ERR(sachip->clk); goto err_free; diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig new file mode 100644 index 00000000000..2a84d557adc --- /dev/null +++ b/arch/arm/configs/ezx_defconfig @@ -0,0 +1,1614 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc3 +# Mon Jul 7 17:52:21 2008 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +CONFIG_PXA_EZX=y +CONFIG_MACH_EZX_A780=y +CONFIG_MACH_EZX_E680=y +CONFIG_MACH_EZX_A1200=y +CONFIG_MACH_EZX_A910=y +CONFIG_MACH_EZX_E6=y +CONFIG_MACH_EZX_E2=y +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +CONFIG_PXA_PWM=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TC6393XB is not set +CONFIG_EZX_PCAP=y + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_PXA27x is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_SMARTPANEL is not set +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_AM200EPD is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_PWM=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# SPI devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_M66592 is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_MMC_SPI is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=m +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c index bd4ef53bc6b..8b8c9d38a76 100644 --- a/arch/arm/kernel/init_task.c +++ b/arch/arm/kernel/init_task.c @@ -13,7 +13,6 @@ #include <asm/pgtable.h> static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct mm_struct init_mm = INIT_MM(init_mm); diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 1de121fc55f..f44647738ee 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -16,16 +16,32 @@ #include <asm/mach/arch.h> #include <asm/arch/at91x40.h> #include <asm/arch/at91_st.h> +#include <asm/arch/timex.h> #include "generic.h" /* - * This is used in the gpio code, stub locally. + * Export the clock functions for the AT91X40. Some external code common + * to all AT91 family parts relys on this, like the gpio and serial support. */ int clk_enable(struct clk *clk) { return 0; } +void clk_disable(struct clk *clk) +{ +} + +unsigned long clk_get_rate(struct clk *clk) +{ + return AT91X40_MASTER_CLOCK; +} + +struct clk *clk_get(struct device *dev, const char *id) +{ + return NULL; +} + void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 92d79fb3931..62e653a3ea1 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev) lm_set_drvdata(dev, impd1); - printk("IM-PD1 found at 0x%08lx\n", dev->resource.start); + printk("IM-PD1 found at 0x%08lx\n", + (unsigned long)dev->resource.start); for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { impd1->vcos[i].owner = THIS_MODULE, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index d55fa4e9bb4..c07f497000c 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, v3_readb(V3_LB_ISTAT)); printk(KERN_DEBUG "%s", buf); - printascii(buf); #endif v3_writeb(V3_LB_ISTAT, 0); @@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid) unsigned long pc = instruction_pointer(regs); unsigned long instr = *(unsigned long *)pc; char buf[128]; + extern void printascii(const char *); sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index a0b16a7e8a0..a4d20127a60 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -24,7 +24,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> -#include <linux/spi/tsc2102.h> #include <linux/interrupt.h> #include <linux/apm-emulation.h> @@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery) #define palmte_get_power_status NULL #endif -static struct tsc2102_config palmte_tsc2102_config = { - .use_internal = 0, - .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP, - .temp_at25c = { 2200, 2615 }, - .apm_report = palmte_get_power_status, - .alsa_config = &palmte_alsa_config, -}; - static struct omap_board_config_kernel palmte_config[] __initdata = { { OMAP_TAG_USB, &palmte_usb_config }, { OMAP_TAG_MMC, &palmte_mmc_config }, @@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { .bus_num = 2, /* uWire (officially) */ .chip_select = 0, /* As opposed to 3 */ .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO), - .platform_data = &palmte_tsc2102_config, .max_speed_hz = 8000000, }, }; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 55e8d2f10dd..fdea1e7dc34 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -200,7 +200,6 @@ config MACH_ARMCORE config MACH_MAGICIAN bool "Enable HTC Magician Support" - depends on ARCH_PXA select PXA27x select IWMMXT @@ -210,6 +209,20 @@ config MACH_PCM027 select IWMMXT select PXA_SSP +config ARCH_PXA_PALM + bool "PXA based Palm PDAs" + select HAVE_PWM + +config MACH_PALMTX + bool "Palm T|X" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Palm T|X + handheld computer. + config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM @@ -231,6 +244,42 @@ config PCM990_DISPLAY_NONE endchoice +config PXA_EZX + bool "Motorola EZX Platform" + select PXA27x + select IWMMXT + select HAVE_PWM + +config MACH_EZX_A780 + bool "Motorola EZX A780" + default y + depends on PXA_EZX + +config MACH_EZX_E680 + bool "Motorola EZX E680" + default y + depends on PXA_EZX + +config MACH_EZX_A1200 + bool "Motorola EZX A1200" + default y + depends on PXA_EZX + +config MACH_EZX_A910 + bool "Motorola EZX A910" + default y + depends on PXA_EZX + +config MACH_EZX_E6 + bool "Motorola EZX E6" + default y + depends on PXA_EZX + +config MACH_EZX_E2 + bool "Motorola EZX E2" + default y + depends on PXA_EZX + endmenu config PXA25x @@ -272,4 +321,13 @@ config PXA_PWM default BACKLIGHT_PWM help Enable support for PXA2xx/PXA3xx PWM controllers + +config TOSA_BT + tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" + depends on MACH_TOSA + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on tosa. + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f2b77ef43f2..5220a5c3fe9 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -4,7 +4,7 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o dma.o \ - time.o gpio.o + time.o gpio.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o @@ -41,6 +41,7 @@ obj-$(CONFIG_MACH_E740) += e740_lcd.o obj-$(CONFIG_MACH_E750) += e750_lcd.o obj-$(CONFIG_MACH_E400) += e400_lcd.o obj-$(CONFIG_MACH_E800) += e800_lcd.o +obj-$(CONFIG_MACH_PALMTX) += palmtx.o ifeq ($(CONFIG_MACH_ZYLONITE),y) obj-y += zylonite.o @@ -50,6 +51,7 @@ endif obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o +obj-$(CONFIG_PXA_EZX) += ezx.o # Support for blinky lights led-y := leds.o @@ -63,3 +65,5 @@ obj-$(CONFIG_LEDS) += $(led-y) ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o endif + +obj-$(CONFIG_TOSA_BT) += tosa-bt.o diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index b4d04955dcb..630063ffa6f 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk) EXPORT_SYMBOL(clk_get_rate); -static void clk_gpio27_enable(struct clk *clk) -{ - pxa_gpio_mode(GPIO11_3_6MHz_MD); -} - -static void clk_gpio27_disable(struct clk *clk) -{ -} - -static const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, -}; - - void clk_cken_enable(struct clk *clk) { CKEN |= 1 << clk->cken; @@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = { .disable = clk_cken_disable, }; -static struct clk common_clks[] = { - { - .name = "GPIO27_CLK", - .ops = &clk_gpio27_ops, - .rate = 3686400, - }, -}; - void clks_register(struct clk *clks, size_t num) { int i; @@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num) list_add(&clks[i].node, &clocks); mutex_unlock(&clocks_mutex); } - -static int __init clk_init(void) -{ - clks_register(common_clks, ARRAY_SIZE(common_clks)); - return 0; -} -arch_initcall(clk_init); diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 83cbfaba485..32d0c074b35 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -47,6 +47,15 @@ struct clk { .other = _other, \ } +#define INIT_CLK(_name, _ops, _rate, _delay, _dev) \ + { \ + .name = _name, \ + .dev = _dev, \ + .ops = _ops, \ + .rate = _rate, \ + .delay = _delay, \ + } + extern const struct clkops clk_cken_ops; void clk_cken_enable(struct clk *clk); diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index 319c9ff3ab9..bcf0cde6ccc 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -5,7 +5,7 @@ * * Bits taken from various places. * - * Copyright (C) 2007 Compulab, Ltd. + * Copyright (C) 2007, 2008 Compulab, Ltd. * Mike Rapoport <mike@compulab.co.il> * * This program is free software; you can redistribute it and/or modify @@ -19,16 +19,16 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/mach/pci.h> -#include <asm/arch/cm-x270.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> #include <asm/mach-types.h> #include <asm/hardware/it8152.h> -unsigned long it8152_base_address = CMX270_IT8152_VIRT; +unsigned long it8152_base_address; +static int cmx270_it8152_irq_gpio; /* * Only first 64MB of memory can be accessed via PCI. @@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, unsigned int sz = SZ_64M >> PAGE_SHIFT; if (machine_is_armcore()) { - pr_info("Adjusting zones for CM-x270\n"); + pr_info("Adjusting zones for CM-X270\n"); /* * Only adjust if > 64M on current system @@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) { /* clear our parent irq */ - GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ); + GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio); it8152_irq_demux(irq, desc); } -void __cmx270_pci_init_irq(void) +void __cmx270_pci_init_irq(int irq_gpio) { it8152_init_irq(); - pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ)); - set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING); - set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ), - cmx270_it8152_irq_demux); + cmx270_it8152_irq_gpio = irq_gpio; + + set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING); + + set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); } #ifdef CONFIG_PM @@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* Here comes the ugly part. The routing is baseboard specific, - but defining a platform for each possible base of CM-x270 is - unrealistic. Here we keep mapping for ATXBase and SB-x270. + but defining a platform for each possible base of CM-X270 is + unrealistic. Here we keep mapping for ATXBase and SB-X270. */ /* ATXBASE PCI slot */ if (slot == 7) diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h index ffe37b66f9a..48f532f4cb5 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.h +++ b/arch/arm/mach-pxa/cm-x270-pci.h @@ -1,13 +1,13 @@ -extern void __cmx270_pci_init_irq(void); +extern void __cmx270_pci_init_irq(int irq_gpio); extern void __cmx270_pci_suspend(void); extern void __cmx270_pci_resume(void); #ifdef CONFIG_PCI -#define cmx270_pci_init_irq __cmx270_pci_init_irq -#define cmx270_pci_suspend __cmx270_pci_suspend -#define cmx270_pci_resume __cmx270_pci_resume +#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x) +#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x) +#define cmx270_pci_resume(x) __cmx270_pci_resume(x) #else -#define cmx270_pci_init_irq() do {} while (0) -#define cmx270_pci_suspend() do {} while (0) -#define cmx270_pci_resume() do {} while (0) +#define cmx270_pci_init_irq(x) do {} while (0) +#define cmx270_pci_suspend(x) do {} while (0) +#define cmx270_pci_resume(x) do {} while (0) #endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index b3c3fd72d04..402e807eae5 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-pxa/cm-x270.c * - * Copyright (C) 2007 CompuLab, Ltd. + * Copyright (C) 2007, 2008 CompuLab, Ltd. * Mike Rapoport <mike@compulab.co.il> * * This program is free software; you can redistribute it and/or modify @@ -9,44 +9,156 @@ * published by the Free Software Foundation. */ -#include <linux/types.h> -#include <linux/pm.h> -#include <linux/fb.h> #include <linux/platform_device.h> -#include <linux/irq.h> #include <linux/sysdev.h> -#include <linux/io.h> -#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio.h> #include <linux/dm9000.h> #include <linux/rtc-v3020.h> -#include <linux/serial_8250.h> - #include <video/mbxfb.h> +#include <linux/leds.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> -#include <asm/arch/pxa2xx-gpio.h> +#include <asm/arch/mfp-pxa27x.h> +#include <asm/arch/pxa-regs.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> #include <asm/arch/ohci.h> #include <asm/arch/mmc.h> #include <asm/arch/bitfield.h> -#include <asm/arch/cm-x270.h> #include <asm/hardware/it8152.h> #include "generic.h" #include "cm-x270-pci.h" +/* virtual addresses for statically mapped regions */ +#define CMX270_VIRT_BASE (0xe8000000) +#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) + #define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22)) #define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22)) -static struct resource cmx270_dm9k_resource[] = { +/* GPIO IRQ usage */ +#define GPIO10_ETHIRQ (10) +#define GPIO22_IT8152_IRQ (22) +#define GPIO83_MMC_IRQ (83) +#define GPIO95_GFXIRQ (95) + +#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ) +#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ) +#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ) +#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ) + +/* MMC power enable */ +#define GPIO105_MMC_POWER (105) + +static unsigned long cmx270_pin_config[] = { + /* AC'97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO98_AC97_SYSCLK, + GPIO113_AC97_nRESET, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* MCI controller */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* SSP1 */ + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, + + /* SSP2 */ + GPIO19_SSP2_SCLK, + GPIO14_SSP2_SFRM, + GPIO87_SSP2_TXD, + GPIO88_SSP2_RXD, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* SDRAM and local bus */ + GPIO15_nCS_1, + GPIO78_nCS_2, + GPIO79_nCS_3, + GPIO80_nCS_4, + GPIO33_nCS_5, + GPIO49_nPWE, + GPIO18_RDY, + + /* GPIO */ + GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, + GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */ + GPIO53_GPIO, /* PC card reset */ + + /* NAND controls */ + GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ + GPIO89_GPIO, /* NAND Ready/Busy */ + + /* interrupts */ + GPIO10_GPIO, /* DM9000 interrupt */ + GPIO83_GPIO, /* MMC card detect */ +}; + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource cmx270_dm9000_resource[] = { [0] = { .start = DM9000_PHYS_BASE, .end = DM9000_PHYS_BASE + 4, @@ -60,35 +172,49 @@ static struct resource cmx270_dm9k_resource[] = { [2] = { .start = CMX270_ETHIRQ, .end = CMX270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; -/* for the moment we limit ourselves to 32bit IO until some - * better IO routines can be written and tested - */ -static struct dm9000_plat_data cmx270_dm9k_platdata = { +static struct dm9000_plat_data cmx270_dm9000_platdata = { .flags = DM9000_PLATF_32BITONLY, }; -/* Ethernet device */ -static struct platform_device cmx270_device_dm9k = { +static struct platform_device cmx270_dm9000_device = { .name = "dm9000", .id = 0, - .num_resources = ARRAY_SIZE(cmx270_dm9k_resource), - .resource = cmx270_dm9k_resource, + .num_resources = ARRAY_SIZE(cmx270_dm9000_resource), + .resource = cmx270_dm9000_resource, .dev = { - .platform_data = &cmx270_dm9k_platdata, + .platform_data = &cmx270_dm9000_platdata, } }; -/* touchscreen controller */ +static void __init cmx270_init_dm9000(void) +{ + platform_device_register(&cmx270_dm9000_device); +} +#else +static inline void cmx270_init_dm9000(void) {} +#endif + +/* UCB1400 touchscreen controller */ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) static struct platform_device cmx270_ts_device = { .name = "ucb1400_ts", .id = -1, }; -/* RTC */ +static void __init cmx270_init_touchscreen(void) +{ + platform_device_register(&cmx270_ts_device); +} +#else +static inline void cmx270_init_touchscreen(void) {} +#endif + +/* V3020 RTC */ +#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) static struct resource cmx270_v3020_resource[] = { [0] = { .start = RTC_PHYS_BASE, @@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = { } }; -/* - * CM-X270 LEDs - */ +static void __init cmx270_init_rtc(void) +{ + platform_device_register(&cmx270_rtc_device); +} +#else +static inline void cmx270_init_rtc(void) {} +#endif + +/* CM-X270 LEDs */ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static struct gpio_led cmx270_leds[] = { + [0] = { + .name = "cm-x270:red", + .default_trigger = "nand-disk", + .gpio = 93, + .active_low = 1, + }, + [1] = { + .name = "cm-x270:green", + .default_trigger = "heartbeat", + .gpio = 94, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data cmx270_gpio_led_pdata = { + .num_leds = ARRAY_SIZE(cmx270_leds), + .leds = cmx270_leds, +}; + static struct platform_device cmx270_led_device = { - .name = "cm-x270-led", + .name = "leds-gpio", .id = -1, + .dev = { + .platform_data = &cmx270_gpio_led_pdata, + }, }; +static void __init cmx270_init_leds(void) +{ + platform_device_register(&cmx270_led_device); +} +#else +static inline void cmx270_init_leds(void) {} +#endif + /* 2700G graphics */ +#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE) static u64 fb_dma_mask = ~(u64)0; static struct resource cmx270_2700G_resource[] = { /* frame buffer memory including ODFB and External SDRAM */ [0] = { - .start = MARATHON_PHYS, - .end = MARATHON_PHYS + 0x02000000, + .start = PXA_CS2_PHYS, + .end = PXA_CS2_PHYS + 0x01ffffff, .flags = IORESOURCE_MEM, }, /* Marathon registers */ [1] = { - .start = MARATHON_PHYS + 0x03fe0000, - .end = MARATHON_PHYS + 0x03ffffff, + .start = PXA_CS2_PHYS + 0x03fe0000, + .end = PXA_CS2_PHYS + 0x03ffffff, .flags = IORESOURCE_MEM, }, }; @@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = { .id = -1, }; -static u64 ata_dma_mask = ~(u64)0; - -static struct platform_device cmx270_ata = { - .name = "pata_cm_x270", - .id = -1, - .dev = { - .dma_mask = &ata_dma_mask, - .coherent_dma_mask = 0xffffffff, - }, -}; - -/* platform devices */ -static struct platform_device *platform_devices[] __initdata = { - &cmx270_device_dm9k, - &cmx270_rtc_device, - &cmx270_2700G, - &cmx270_led_device, - &cmx270_ts_device, - &cmx270_ata, -}; - -/* Map PCI companion and IDE/General Purpose CS statically */ -static struct map_desc cmx270_io_desc[] __initdata = { - [0] = { /* IDE/general purpose space */ - .virtual = CMX270_IDE104_VIRT, - .pfn = __phys_to_pfn(CMX270_IDE104_PHYS), - .length = SZ_64M - SZ_8M, - .type = MT_DEVICE - }, - [1] = { /* PCI bridge */ - .virtual = CMX270_IT8152_VIRT, - .pfn = __phys_to_pfn(CMX270_IT8152_PHYS), - .length = SZ_64M, - .type = MT_DEVICE - }, -}; +static void __init cmx270_init_2700G(void) +{ + platform_device_register(&cmx270_2700G); +} +#else +static inline void cmx270_init_2700G(void) {} +#endif +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) /* Display definitions keep these for backwards compatibility, although symbolic names (as @@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str) */ __setup("monitor=", cmx270_set_display); +static void __init cmx270_init_display(void) +{ + set_pxa_fb_info(cmx270_display); +} +#else +static inline void cmx270_init_display(void) {} +#endif + /* PXA27x OHCI controller setup */ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int cmx270_ohci_init(struct device *dev) { /* Set the Power Control Polarity Low */ @@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = { .init = cmx270_ohci_init, }; +static void __init cmx270_init_ohci(void) +{ + pxa_set_ohci_info(&cmx270_ohci_platform_data); +} +#else +static inline void cmx270_init_ohci(void) {} +#endif +#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) static int cmx270_mci_init(struct device *dev, irq_handler_t cmx270_detect_int, void *data) { int err; - /* - * setup GPIO for PXA27x MMC controller - */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - - /* SB-X270 uses GPIO105 as SD power enable */ - pxa_gpio_mode(105 | GPIO_OUT); + err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power"); + if (err) { + dev_warn(dev, "power gpio unavailable\n"); + return err; + } - /* card detect IRQ on GPIO 83 */ - pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ)); + gpio_direction_output(GPIO105_MMC_POWER, 0); err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) - printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't" - " request MMC card detect IRQ\n"); + if (err) { + gpio_free(GPIO105_MMC_POWER); + dev_err(dev, "cmx270_mci_init: MMC/SD: can't" + " request MMC card detect IRQ\n"); + } return err; } @@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) struct pxamci_platform_data *p_d = dev->platform_data; if ((1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __func__); - GPCR(105) = GPIO_bit(105); + dev_dbg(dev, "power on\n"); + gpio_set_value(GPIO105_MMC_POWER, 0); } else { - GPSR(105) = GPIO_bit(105); - printk(KERN_DEBUG "%s: off\n", __func__); + gpio_set_value(GPIO105_MMC_POWER, 1); + dev_dbg(dev, "power off\n"); } } static void cmx270_mci_exit(struct device *dev, void *data) { free_irq(CMX270_MMC_IRQ, data); + gpio_free(GPIO105_MMC_POWER); } static struct pxamci_platform_data cmx270_mci_platform_data = { @@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = { .exit = cmx270_mci_exit, }; +static void __init cmx270_init_mmc(void) +{ + pxa_set_mci_info(&cmx270_mci_platform_data); +} +#else +static inline void cmx270_init_mmc(void) {} +#endif + #ifdef CONFIG_PM static unsigned long sleep_save_msc[10]; @@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void) static int __init cmx270_pm_init(void) { return 0; } #endif -static void __init cmx270_init(void) +#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) +static void __init cmx270_init_ac97(void) { - cmx270_pm_init(); - - set_pxa_fb_info(cmx270_display); - - /* register CM-X270 platform devices */ - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); pxa_set_ac97_info(NULL); +} +#else +static inline void cmx270_init_ac97(void) {} +#endif - /* set MCI and OHCI platform parameters */ - pxa_set_mci_info(&cmx270_mci_platform_data); - pxa_set_ohci_info(&cmx270_ohci_platform_data); - - /* This enables the STUART */ - pxa_gpio_mode(GPIO46_STRXD_MD); - pxa_gpio_mode(GPIO47_STTXD_MD); +static void __init cmx270_init(void) +{ + cmx270_pm_init(); - /* This enables the BTUART */ - pxa_gpio_mode(GPIO42_BTRXD_MD); - pxa_gpio_mode(GPIO43_BTTXD_MD); - pxa_gpio_mode(GPIO44_BTCTS_MD); - pxa_gpio_mode(GPIO45_BTRTS_MD); + pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config)); + + cmx270_init_dm9000(); + cmx270_init_rtc(); + cmx270_init_display(); + cmx270_init_mmc(); + cmx270_init_ohci(); + cmx270_init_ac97(); + cmx270_init_touchscreen(); + cmx270_init_leds(); + cmx270_init_2700G(); } static void __init cmx270_init_irq(void) { pxa27x_init_irq(); + cmx270_pci_init_irq(GPIO22_IT8152_IRQ); +} - cmx270_pci_init_irq(); +#ifdef CONFIG_PCI +/* Map PCI companion statically */ +static struct map_desc cmx270_io_desc[] __initdata = { + [0] = { /* PCI bridge */ + .virtual = CMX270_IT8152_VIRT, + .pfn = __phys_to_pfn(PXA_CS4_PHYS), + .length = SZ_64M, + .type = MT_DEVICE + }, +}; - /* Setup interrupt for dm9000 */ - pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ)); - set_irq_type(CMX270_ETHIRQ, IRQT_RISING); +static void __init cmx270_map_io(void) +{ + pxa_map_io(); + iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc)); - /* Setup interrupt for 2700G */ - pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ)); - set_irq_type(CMX270_GFXIRQ, IRQT_FALLING); + it8152_base_address = CMX270_IT8152_VIRT; } - +#else static void __init cmx270_map_io(void) { pxa_map_io(); - iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc)); } - +#endif MACHINE_START(ARMCORE, "Compulab CM-x270") .boot_params = 0xa0000100, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index e23865affc0..e5cc6ca63c7 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1,7 +1,7 @@ /* - * Support for CompuLab EM-x270 platform + * Support for CompuLab EM-X270 platform * - * Copyright (C) 2007 CompuLab, Ltd. + * Copyright (C) 2007, 2008 CompuLab, Ltd. * Author: Mike Rapoport <mike@compulab.co.il> * * This program is free software; you can redistribute it and/or modify @@ -14,31 +14,159 @@ #include <linux/dm9000.h> #include <linux/rtc-v3020.h> - #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/gpio.h> #include <asm/mach-types.h> - #include <asm/mach/arch.h> +#include <asm/arch/mfp-pxa27x.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/pxa27x-udc.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> #include <asm/arch/ohci.h> #include <asm/arch/mmc.h> -#include <asm/arch/bitfield.h> +#include <asm/arch/pxa27x_keypad.h> #include "generic.h" /* GPIO IRQ usage */ -#define EM_X270_MMC_PD (105) -#define EM_X270_ETHIRQ IRQ_GPIO(41) -#define EM_X270_MMC_IRQ IRQ_GPIO(13) +#define GPIO41_ETHIRQ (41) +#define GPIO13_MMC_CD (13) +#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD) + +/* NAND control GPIOs */ +#define GPIO11_NAND_CS (11) +#define GPIO56_NAND_RB (56) + +static unsigned long em_x270_pin_config[] = { + /* AC'97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO98_AC97_SYSCLK, + GPIO113_AC97_nRESET, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* MCI controller */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* QCI */ + GPIO84_CIF_FV, + GPIO25_CIF_LV, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO81_CIF_DD_0, + GPIO55_CIF_DD_1, + GPIO51_CIF_DD_2, + GPIO50_CIF_DD_3, + GPIO52_CIF_DD_4, + GPIO48_CIF_DD_5, + GPIO17_CIF_DD_6, + GPIO12_CIF_DD_7, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* Keypad */ + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, + GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, + GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, + GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + GPIO106_KP_MKOUT_3, + GPIO107_KP_MKOUT_4, + GPIO108_KP_MKOUT_5, + GPIO96_KP_MKOUT_6, + GPIO22_KP_MKOUT_7, + + /* SSP1 */ + GPIO26_SSP1_RXD, + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO57_SSP1_TXD, + + /* SSP2 */ + GPIO19_SSP2_SCLK, + GPIO14_SSP2_SFRM, + GPIO89_SSP2_TXD, + GPIO88_SSP2_RXD, + + /* SDRAM and local bus */ + GPIO15_nCS_1, + GPIO78_nCS_2, + GPIO79_nCS_3, + GPIO80_nCS_4, + GPIO49_nPWE, + GPIO18_RDY, + + /* GPIO */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + + /* power controls */ + GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ + GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ + + /* NAND controls */ + GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ + GPIO56_GPIO, /* NAND Ready/Busy */ + + /* interrupts */ + GPIO13_GPIO, /* MMC card detect */ + GPIO41_GPIO, /* DM9000 interrupt */ +}; -static struct resource em_x270_dm9k_resource[] = { +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource em_x270_dm9000_resource[] = { [0] = { .start = PXA_CS2_PHYS, .end = PXA_CS2_PHYS + 3, @@ -52,36 +180,34 @@ static struct resource em_x270_dm9k_resource[] = { [2] = { .start = EM_X270_ETHIRQ, .end = EM_X270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; -/* for the moment we limit ourselves to 32bit IO until some - * better IO routines can be written and tested - */ -static struct dm9000_plat_data em_x270_dm9k_platdata = { +static struct dm9000_plat_data em_x270_dm9000_platdata = { .flags = DM9000_PLATF_32BITONLY, }; -/* Ethernet device */ -static struct platform_device em_x270_dm9k = { +static struct platform_device em_x270_dm9000 = { .name = "dm9000", .id = 0, - .num_resources = ARRAY_SIZE(em_x270_dm9k_resource), - .resource = em_x270_dm9k_resource, + .num_resources = ARRAY_SIZE(em_x270_dm9000_resource), + .resource = em_x270_dm9000_resource, .dev = { - .platform_data = &em_x270_dm9k_platdata, + .platform_data = &em_x270_dm9000_platdata, } }; -/* WM9712 touchscreen controller. Hopefully the driver will make it to - * the mainstream sometime */ -static struct platform_device em_x270_ts = { - .name = "wm97xx-ts", - .id = -1, -}; +static void __init em_x270_init_dm9000(void) +{ + platform_device_register(&em_x270_dm9000); +} +#else +static inline void em_x270_init_dm9000(void) {} +#endif -/* RTC */ +/* V3020 RTC */ +#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) static struct resource em_x270_v3020_resource[] = { [0] = { .start = PXA_CS4_PHYS, @@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = { } }; -/* NAND flash */ -#define GPIO_NAND_CS (11) -#define GPIO_NAND_RB (56) +static void __init em_x270_init_rtc(void) +{ + platform_device_register(&em_x270_rtc); +} +#else +static inline void em_x270_init_rtc(void) {} +#endif +/* NAND flash */ +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) static inline void nand_cs_on(void) { - GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); + gpio_set_value(GPIO11_NAND_CS, 0); } static void nand_cs_off(void) { dsb(); - GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); + gpio_set_value(GPIO11_NAND_CS, 1); } /* hardware specific access to control-lines */ @@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd) { dsb(); - return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB); + return gpio_get_value(GPIO56_NAND_RB); } static struct mtd_partition em_x270_partition_info[] = { @@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = { } }; -/* platform devices */ -static struct platform_device *platform_devices[] __initdata = { - &em_x270_dm9k, - &em_x270_ts, - &em_x270_rtc, - &em_x270_nand, -}; +static void __init em_x270_init_nand(void) +{ + int err; + err = gpio_request(GPIO11_NAND_CS, "NAND CS"); + if (err) { + pr_warning("EM-X270: failed to request NAND CS gpio\n"); + return; + } + + gpio_direction_output(GPIO11_NAND_CS, 1); + + err = gpio_request(GPIO56_NAND_RB, "NAND R/B"); + if (err) { + pr_warning("EM-X270: failed to request NAND R/B gpio\n"); + gpio_free(GPIO11_NAND_CS); + return; + } + + gpio_direction_input(GPIO56_NAND_RB); + + platform_device_register(&em_x270_nand); +} +#else +static inline void em_x270_init_nand(void) {} +#endif /* PXA27x OHCI controller setup */ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int em_x270_ohci_init(struct device *dev) { /* Set the Power Control Polarity Low */ @@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = { .init = em_x270_ohci_init, }; +static void __init em_x270_init_ohci(void) +{ + pxa_set_ohci_info(&em_x270_ohci_platform_data); +} +#else +static inline void em_x270_init_ohci(void) {} +#endif +/* MCI controller setup */ +#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) static int em_x270_mci_init(struct device *dev, irq_handler_t em_x270_detect_int, void *data) { - int err; - - /* setup GPIO for PXA27x MMC controller */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - - /* EM-X270 uses GPIO13 as SD power enable */ - pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT); - - err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "MMC card detect", data); + int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "MMC card detect", data); if (err) { printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", __func__, err); @@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) static void em_x270_mci_exit(struct device *dev, void *data) { - free_irq(EM_X270_MMC_IRQ, data); + int irq = gpio_to_irq(GPIO13_MMC_CD); + free_irq(irq, data); } static struct pxamci_platform_data em_x270_mci_platform_data = { @@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = { .exit = em_x270_mci_exit, }; +static void __init em_x270_init_mmc(void) +{ + pxa_set_mci_info(&em_x270_mci_platform_data); +} +#else +static inline void em_x270_init_mmc(void) {} +#endif + /* LCD 480x640 */ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static struct pxafb_mode_info em_x270_lcd_mode = { .pixclock = 50000, .bpp = 16, @@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = { static struct pxafb_mach_info em_x270_lcd = { .modes = &em_x270_lcd_mode, .num_modes = 1, - .cmap_inverse = 0, - .cmap_static = 0, - .lccr0 = LCCR0_PAS, - .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff), + .lcd_conn = LCD_COLOR_TFT_16BPP, }; - -static void __init em_x270_init(void) +static void __init em_x270_init_lcd(void) { - /* setup LCD */ set_pxa_fb_info(&em_x270_lcd); +} +#else +static inline void em_x270_init_lcd(void) {} +#endif - /* register EM-X270 platform devices */ - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) +static void __init em_x270_init_ac97(void) +{ pxa_set_ac97_info(NULL); +} +#else +static inline void em_x270_init_ac97(void) {} +#endif + +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) +static unsigned int em_x270_matrix_keys[] = { + KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B), + KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT), + KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D), +}; - /* set MCI and OHCI platform parameters */ - pxa_set_mci_info(&em_x270_mci_platform_data); - pxa_set_ohci_info(&em_x270_ohci_platform_data); +struct pxa27x_keypad_platform_data em_x270_keypad_info = { + /* code map for the matrix keys */ + .matrix_key_rows = 3, + .matrix_key_cols = 3, + .matrix_key_map = em_x270_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys), +}; + +static void __init em_x270_init_keypad(void) +{ + pxa_set_keypad_info(&em_x270_keypad_info); +} +#else +static inline void em_x270_init_keypad(void) {} +#endif - /* setup STUART GPIOs */ - pxa_gpio_mode(GPIO46_STRXD_MD); - pxa_gpio_mode(GPIO47_STTXD_MD); +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button gpio_keys_button[] = { + [0] = { + .desc = "sleep/wakeup", + .code = KEY_SUSPEND, + .type = EV_PWR, + .gpio = 1, + .wakeup = 1, + }, +}; - /* setup BTUART GPIOs */ - pxa_gpio_mode(GPIO42_BTRXD_MD); - pxa_gpio_mode(GPIO43_BTTXD_MD); - pxa_gpio_mode(GPIO44_BTCTS_MD); - pxa_gpio_mode(GPIO45_BTRTS_MD); +static struct gpio_keys_platform_data em_x270_gpio_keys_data = { + .buttons = gpio_keys_button, + .nbuttons = 1, +}; - /* Setup interrupt for dm9000 */ - set_irq_type(EM_X270_ETHIRQ, IRQT_RISING); +static struct platform_device em_x270_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &em_x270_gpio_keys_data, + }, +}; + +static void __init em_x270_init_gpio_keys(void) +{ + platform_device_register(&em_x270_gpio_keys); +} +#else +static inline void em_x270_init_gpio_keys(void) {} +#endif + +static void __init em_x270_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); + + em_x270_init_dm9000(); + em_x270_init_rtc(); + em_x270_init_nand(); + em_x270_init_lcd(); + em_x270_init_mmc(); + em_x270_init_ohci(); + em_x270_init_keypad(); + em_x270_init_gpio_keys(); + em_x270_init_ac97(); } -MACHINE_START(EM_X270, "Compulab EM-x270") +MACHINE_START(EM_X270, "Compulab EM-X270") .boot_params = 0xa0000100, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c new file mode 100644 index 00000000000..0143eed6539 --- /dev/null +++ b/arch/arm/mach-pxa/ezx.c @@ -0,0 +1,220 @@ +/* + * ezx.c - Common code for the EZX platform. + * + * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>, + * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>, + * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/pwm_backlight.h> + +#include <asm/setup.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/ohci.h> +#include <asm/arch/i2c.h> + +#include <asm/arch/mfp-pxa27x.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include "devices.h" +#include "generic.h" + +static struct platform_pwm_backlight_data ezx_backlight_data = { + .pwm_id = 0, + .max_brightness = 1023, + .dft_brightness = 1023, + .pwm_period_ns = 78770, +}; + +static struct platform_device ezx_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &ezx_backlight_data, + }, +}; + +static struct pxafb_mode_info mode_ezx_old = { + .pixclock = 150000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 10, + .left_margin = 20, + .right_margin = 10, + .vsync_len = 2, + .upper_margin = 3, + .lower_margin = 2, + .sync = 0, +}; + +static struct pxafb_mach_info ezx_fb_info_1 = { + .modes = &mode_ezx_old, + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP, +}; + +static struct pxafb_mode_info mode_72r89803y01 = { + .pixclock = 192308, + .xres = 240, + .yres = 320, + .bpp = 32, + .depth = 18, + .hsync_len = 10, + .left_margin = 20, + .right_margin = 10, + .vsync_len = 2, + .upper_margin = 3, + .lower_margin = 2, + .sync = 0, +}; + +static struct pxafb_mach_info ezx_fb_info_2 = { + .modes = &mode_72r89803y01, + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_18BPP, +}; + +static struct platform_device *devices[] __initdata = { + &ezx_backlight_device, +}; + +static unsigned long ezx_pin_config[] __initdata = { + /* PWM backlight */ + GPIO16_PWM0_OUT, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* For A780 support (connected with Neptune GSM chip) */ + GPIO30_USB_P3_2, /* ICL_TXENB */ + GPIO31_USB_P3_6, /* ICL_VPOUT */ + GPIO90_USB_P3_5, /* ICL_VPIN */ + GPIO91_USB_P3_1, /* ICL_XRXD */ + GPIO56_USB_P3_4, /* ICL_VMOUT */ + GPIO113_USB_P3_3, /* /ICL_VMIN */ +}; + +static void __init ezx_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config)); + pxa_set_i2c_info(NULL); + if (machine_is_ezx_a780() || machine_is_ezx_e680()) + set_pxa_fb_info(&ezx_fb_info_1); + else + set_pxa_fb_info(&ezx_fb_info_2); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + /* We have two ram chips. First one with 32MB at 0xA0000000 and a second + * 16MB one at 0xAC000000 + */ + mi->nr_banks = 2; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (32*1024*1024); + mi->bank[1].start = 0xac000000; + mi->bank[1].node = 1; + mi->bank[1].size = (16*1024*1024); +} + +#ifdef CONFIG_MACH_EZX_A780 +MACHINE_START(EZX_A780, "Motorola EZX A780") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = ezx_fixup, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = &ezx_init, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EZX_E680 +MACHINE_START(EZX_E680, "Motorola EZX E680") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = ezx_fixup, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = &ezx_init, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EZX_A1200 +MACHINE_START(EZX_A1200, "Motorola EZX A1200") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = ezx_fixup, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = &ezx_init, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EZX_A910 +MACHINE_START(EZX_A910, "Motorola EZX A910") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = ezx_fixup, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = &ezx_init, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EZX_E6 +MACHINE_START(EZX_E6, "Motorola EZX E6") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = ezx_fixup, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = &ezx_init, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_EZX_E2 +MACHINE_START(EZX_E2, "Motorola EZX E2") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = ezx_fixup, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = &ezx_init, +MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 01b2fa79021..bad5821be41 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -17,17 +17,15 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/mfd/htc-egpio.h> #include <linux/mfd/htc-pasic3.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> -#include <asm/gpio.h> #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -44,7 +42,7 @@ #include "devices.h" #include "generic.h" -static unsigned long magician_pin_config[] = { +static unsigned long magician_pin_config[] __initdata = { /* SDRAM and Static Memory I/O Signals */ GPIO20_nSDCS_2, @@ -399,6 +397,7 @@ static struct platform_pwm_backlight_data backlight_data = { static struct platform_device backlight = { .name = "pwm-backlight", + .id = -1, .dev = { .parent = &pxa27x_device_pwm0.dev, .platform_data = &backlight_data, @@ -511,6 +510,37 @@ static struct platform_device pasic3 = { * External power */ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); + if (ret) + goto err_cs_ac; + ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB"); + if (ret) + goto err_cs_usb; + ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN"); + if (ret) + goto err_chg_en; + ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN"); + if (!ret) + ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0); + if (ret) + goto err_nchg_en; + + return 0; + +err_nchg_en: + gpio_free(EGPIO_MAGICIAN_CHARGE_EN); +err_chg_en: + gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); +err_cs_usb: + gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); +err_cs_ac: + return ret; +} + static int magician_is_ac_online(void) { return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); @@ -527,14 +557,24 @@ static void magician_set_charge(int flags) gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); } +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO30_MAGICIAN_nCHARGE_EN); + gpio_free(EGPIO_MAGICIAN_CHARGE_EN); + gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); + gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); +} + static char *magician_supplicants[] = { "ds2760-battery.0", "backup-battery" }; static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, .is_ac_online = magician_is_ac_online, .is_usb_online = magician_is_usb_online, .set_charge = magician_set_charge, + .exit = power_supply_exit, .supplied_to = magician_supplicants, .num_supplicants = ARRAY_SIZE(magician_supplicants), }; diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c new file mode 100644 index 00000000000..408657a24f8 --- /dev/null +++ b/arch/arm/mach-pxa/palmtx.c @@ -0,0 +1,416 @@ +/* + * Hardware definitions for PalmTX + * + * Author: Marek Vasut <marek.vasut@gmail.com> + * + * Based on work of: + * Alex Osborne <ato@meshy.org> + * Cristiano P. <cristianop@users.sourceforge.net> + * Jan Herman <2hp@seznam.cz> + * Michal Hrusecky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/audio.h> +#include <asm/arch/palmtx.h> +#include <asm/arch/mmc.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/mfp-pxa27x.h> +#include <asm/arch/irda.h> +#include <asm/arch/pxa27x_keypad.h> +#include <asm/arch/udc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmtx_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* IrDA */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* USB */ + GPIO13_GPIO, + + /* PCMCIA */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int, + void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + return err; + } + + err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER"); + if (err) + goto pwr_err; + + err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY"); + if (err) + goto ro_err; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +ro_err: + gpio_free(GPIO_NR_PALMTX_SD_POWER); +pwr_err: + free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data); + return err; +} + +static void palmtx_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMTX_SD_READONLY); + gpio_free(GPIO_NR_PALMTX_SD_POWER); + free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data); +} + +static void palmtx_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmtx_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY); +} + +static struct pxamci_platform_data palmtx_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmtx_mci_power, + .get_ro = palmtx_mci_get_ro, + .init = palmtx_mci_init, + .exit = palmtx_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int palmtx_matrix_keys[] = { + KEY(0, 0, KEY_POWER), + KEY(0, 1, KEY_F1), + KEY(0, 2, KEY_ENTER), + + KEY(1, 0, KEY_F2), + KEY(1, 1, KEY_F3), + KEY(1, 2, KEY_F4), + + KEY(2, 0, KEY_UP), + KEY(2, 2, KEY_DOWN), + + KEY(3, 0, KEY_RIGHT), + KEY(3, 2, KEY_LEFT), + +}; + +static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = { + .matrix_key_rows = 4, + .matrix_key_cols = 3, + .matrix_key_map = palmtx_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(palmtx_matrix_keys), + + .debounce_interval = 30, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmtx_pxa_buttons[] = { + {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, +}; + +static struct gpio_keys_platform_data palmtx_pxa_keys_data = { + .buttons = palmtx_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmtx_pxa_buttons), +}; + +static struct platform_device palmtx_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmtx_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmtx_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + + return 0; +err2: + gpio_free(GPIO_NR_PALMTX_BL_POWER); +err: + return ret; +} + +static int palmtx_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness); + return brightness; +} + +static void palmtx_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTX_BL_POWER); + gpio_free(GPIO_NR_PALMTX_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmtx_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMTX_MAX_INTENSITY, + .dft_brightness = PALMTX_MAX_INTENSITY, + .pwm_period_ns = PALMTX_PERIOD_NS, + .init = palmtx_backlight_init, + .notify = palmtx_backlight_notify, + .exit = palmtx_backlight_exit, +}; + +static struct platform_device palmtx_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palmtx_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static void palmtx_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmtx_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmtx_irda_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static void palmtx_udc_command(int cmd) +{ + gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd); + udelay(50); + gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd); +} + +static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { + .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, + .gpio_vbus_inverted = 1, + .udc_command = palmtx_udc_command, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err_cs_ac; + + ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB"); + if (ret) + goto err_cs_usb; + + return 0; + +err_cs_usb: + gpio_free(GPIO_NR_PALMTX_POWER_DETECT); +err_cs_ac: + return ret; +} + +static int palmtx_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT); +} + +static int palmtx_is_usb_online(void) +{ + return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTX_USB_DETECT_N); + gpio_free(GPIO_NR_PALMTX_POWER_DETECT); +} + +static char *palmtx_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmtx_is_ac_online, + .is_usb_online = palmtx_is_usb_online, + .exit = power_supply_exit, + .supplied_to = palmtx_supplicants, + .num_supplicants = ARRAY_SIZE(palmtx_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmtx_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmtx_lcd_screen = { + .modes = palmtx_lcd_modes, + .num_modes = ARRAY_SIZE(palmtx_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmtx_pxa_keys, +#endif + &palmtx_backlight, + &power_supply, +}; + +static struct map_desc palmtx_io_desc[] __initdata = { +{ + .virtual = PALMTX_PCMCIA_VIRT, + .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS), + .length = PALMTX_PCMCIA_SIZE, + .type = MT_DEVICE +}, +}; + +static void __init palmtx_map_io(void) +{ + pxa_map_io(); + iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc)); +} + +static void __init palmtx_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config)); + + set_pxa_fb_info(&palmtx_lcd_screen); + pxa_set_mci_info(&palmtx_mci_platform_data); + pxa_set_udc_info(&palmtx_udc_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmtx_ficp_platform_data); + pxa_set_keypad_info(&palmtx_keypad_platform_data); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMTX, "Palm T|X") + .phys_io = PALMTX_PHYS_IO_START, + .io_pg_offst = io_p2v(0x40000000), + .boot_params = 0xa0000100, + .map_io = palmtx_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = palmtx_init +MACHINE_END diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 5d87c7c866e..30023b00e47 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -33,14 +33,30 @@ #include <asm/arch/camera.h> #include <asm/mach/map.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/audio.h> #include <asm/arch/mmc.h> #include <asm/arch/ohci.h> #include <asm/arch/pcm990_baseboard.h> #include <asm/arch/pxafb.h> +#include <asm/arch/mfp-pxa27x.h> #include "devices.h" +#include "generic.h" + +static unsigned long pcm990_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + /* USB */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + /* PWM0 */ + GPIO16_PWM0_OUT, +}; /* * pcm990_lcd_power - control power supply to the LCD @@ -277,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, { int err; - /* - * enable GPIO for PXA27x MMC controller - */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED, "MMC card detect", data); if (err) @@ -333,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = { */ static int pcm990_ohci_init(struct device *dev) { - pxa_gpio_mode(PCM990_USB_OVERCURRENT); - pxa_gpio_mode(PCM990_USB_PWR_EN); /* * disable USB port 2 and 3 * power sense is active low @@ -361,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = { * PXA27x Camera specific stuff */ #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) +static unsigned long pcm990_camera_pin_config[] = { + /* CIF */ + GPIO98_CIF_DD_0, + GPIO105_CIF_DD_1, + GPIO104_CIF_DD_2, + GPIO103_CIF_DD_3, + GPIO95_CIF_DD_4, + GPIO94_CIF_DD_5, + GPIO93_CIF_DD_6, + GPIO108_CIF_DD_7, + GPIO107_CIF_DD_8, + GPIO106_CIF_DD_9, + GPIO42_CIF_MCLK, + GPIO45_CIF_PCLK, + GPIO43_CIF_FV, + GPIO44_CIF_LV, +}; + static int pcm990_pxacamera_init(struct device *dev) { - pxa_gpio_mode(GPIO98_CIF_DD_0_MD); - pxa_gpio_mode(GPIO105_CIF_DD_1_MD); - pxa_gpio_mode(GPIO104_CIF_DD_2_MD); - pxa_gpio_mode(GPIO103_CIF_DD_3_MD); - pxa_gpio_mode(GPIO95_CIF_DD_4_MD); - pxa_gpio_mode(GPIO94_CIF_DD_5_MD); - pxa_gpio_mode(GPIO93_CIF_DD_6_MD); - pxa_gpio_mode(GPIO108_CIF_DD_7_MD); - pxa_gpio_mode(GPIO107_CIF_DD_8_MD); - pxa_gpio_mode(GPIO106_CIF_DD_9_MD); - pxa_gpio_mode(GPIO42_CIF_MCLK_MD); - pxa_gpio_mode(GPIO45_CIF_PCLK_MD); - pxa_gpio_mode(GPIO43_CIF_FV_MD); - pxa_gpio_mode(GPIO44_CIF_LV_MD); - + pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config)); return 0; } @@ -449,8 +457,10 @@ static struct map_desc pcm990_io_desc[] __initdata = { */ void __init pcm990_baseboard_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config)); + /* register CPLD access */ - iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc)); + iotable_init(ARRAY_AND_SIZE(pcm990_io_desc)); /* register CPLD's IRQ controller */ pcm990_init_irq(); @@ -458,7 +468,6 @@ void __init pcm990_baseboard_init(void) #ifndef CONFIG_PCM990_DISPLAY_NONE set_pxa_fb_info(&pcm990_fbinfo); #endif - pxa_gpio_mode(GPIO16_PWM0_MD); platform_device_register(&pcm990_backlight_device); /* MMC */ @@ -473,9 +482,8 @@ void __init pcm990_baseboard_init(void) #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) pxa_set_camera_info(&pcm990_pxacamera_platform_data); - i2c_register_board_info(0, pcm990_i2c_devices, - ARRAY_SIZE(pcm990_i2c_devices)); + i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices)); #endif - printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n"); + printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n"); } diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 4cd50e3005e..c5b845b935b 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -109,6 +109,52 @@ static const struct clkops clk_pxa25x_lcd_ops = { .getrate = clk_pxa25x_lcd_getrate, }; +static unsigned long gpio12_config_32k[] = { + GPIO12_32KHz, +}; + +static unsigned long gpio12_config_gpio[] = { + GPIO12_GPIO, +}; + +static void clk_gpio12_enable(struct clk *clk) +{ + pxa2xx_mfp_config(gpio12_config_32k, 1); +} + +static void clk_gpio12_disable(struct clk *clk) +{ + pxa2xx_mfp_config(gpio12_config_gpio, 1); +} + +static const struct clkops clk_pxa25x_gpio12_ops = { + .enable = clk_gpio12_enable, + .disable = clk_gpio12_disable, +}; + +static unsigned long gpio11_config_3m6[] = { + GPIO11_3_6MHz, +}; + +static unsigned long gpio11_config_gpio[] = { + GPIO11_GPIO, +}; + +static void clk_gpio11_enable(struct clk *clk) +{ + pxa2xx_mfp_config(gpio11_config_3m6, 1); +} + +static void clk_gpio11_disable(struct clk *clk) +{ + pxa2xx_mfp_config(gpio11_config_gpio, 1); +} + +static const struct clkops clk_pxa25x_gpio11_ops = { + .enable = clk_gpio11_enable, + .disable = clk_gpio11_disable, +}; + /* * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz) * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz @@ -128,6 +174,8 @@ static struct clk pxa25x_clks[] = { INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL), INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev), + INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL), + INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL), INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), @@ -145,7 +193,10 @@ static struct clk pxa25x_clks[] = { INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), }; -static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL); +static struct clk pxa2xx_clk_aliases[] = { + INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL), + INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL), +}; #ifdef CONFIG_PM @@ -293,7 +344,7 @@ static int __init pxa25x_init(void) int i, ret = 0; /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ - if (cpu_is_pxa25x()) + if (cpu_is_pxa255()) clks_register(&pxa25x_hwuart_clk, 1); if (cpu_is_pxa21x() || cpu_is_pxa25x()) { @@ -317,10 +368,10 @@ static int __init pxa25x_init(void) } /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ - if (cpu_is_pxa25x()) + if (cpu_is_pxa255()) ret = platform_device_register(&pxa_device_hwuart); - clks_register(&gpio7_clk, 1); + clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases)); return ret; } diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c new file mode 100644 index 00000000000..9d39dea57ce --- /dev/null +++ b/arch/arm/mach-pxa/reset.c @@ -0,0 +1,96 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <asm/io.h> +#include <asm/proc-fns.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> + +static void do_hw_reset(void); + +static int reset_gpio = -1; + +int init_gpio_reset(int gpio) +{ + int rc; + + rc = gpio_request(gpio, "reset generator"); + if (rc) { + printk(KERN_ERR "Can't request reset_gpio\n"); + goto out; + } + + rc = gpio_direction_input(gpio); + if (rc) { + printk(KERN_ERR "Can't configure reset_gpio for input\n"); + gpio_free(gpio); + goto out; + } + +out: + if (!rc) + reset_gpio = gpio; + + return rc; +} + +/* + * Trigger GPIO reset. + * This covers various types of logic connecting gpio pin + * to RESET pins (nRESET or GPIO_RESET): + */ +static void do_gpio_reset(void) +{ + BUG_ON(reset_gpio == -1); + + /* drive it low */ + gpio_direction_output(reset_gpio, 0); + mdelay(2); + /* rising edge or drive high */ + gpio_set_value(reset_gpio, 1); + mdelay(2); + /* falling edge */ + gpio_set_value(reset_gpio, 0); + + /* give it some time */ + mdelay(10); + + WARN_ON(1); + /* fallback */ + do_hw_reset(); +} + +static void do_hw_reset(void) +{ + /* Initialize the watchdog and let it fire */ + OWER = OWER_WME; + OSSR = OSSR_M3; + OSMR3 = OSCR + 368640; /* ... in 100 ms */ +} + +void arch_reset(char mode) +{ + if (cpu_is_pxa2xx()) + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + switch (mode) { + case 's': + /* Jump into ROM at address 0 */ + cpu_reset(0); + break; + case 'h': + do_hw_reset(); + break; + case 'g': + do_gpio_reset(); + break; + } +} + diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index dace3820f1e..d58c3e906a9 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -530,11 +530,7 @@ static struct platform_device *devices[] __initdata = { static void spitz_poweroff(void) { - pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT); - GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET); - - mdelay(1000); - arm_machine_restart('h'); + arm_machine_restart('g'); } static void spitz_restart(char mode) @@ -548,6 +544,7 @@ static void spitz_restart(char mode) static void __init common_init(void) { + init_gpio_reset(SPITZ_GPIO_ON_RESET); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 00af7f2fed6..0bb31982fb6 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label) mutex_unlock(&ssp_lock); - if (ssp->port_id != port) + if (&ssp->node == &ssp_list) return NULL; return ssp; diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c new file mode 100644 index 00000000000..7d8505466e5 --- /dev/null +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -0,0 +1,150 @@ +/* + * Bluetooth built-in chip control + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/rfkill.h> + +#include <asm/arch/tosa_bt.h> + +static void tosa_bt_on(struct tosa_bt_data *data) +{ + gpio_set_value(data->gpio_reset, 0); + gpio_set_value(data->gpio_pwr, 1); + gpio_set_value(data->gpio_reset, 1); + mdelay(20); + gpio_set_value(data->gpio_reset, 0); +} + +static void tosa_bt_off(struct tosa_bt_data *data) +{ + gpio_set_value(data->gpio_reset, 1); + mdelay(10); + gpio_set_value(data->gpio_pwr, 0); + gpio_set_value(data->gpio_reset, 0); +} + +static int tosa_bt_toggle_radio(void *data, enum rfkill_state state) +{ + pr_info("BT_RADIO going: %s\n", + state == RFKILL_STATE_ON ? "on" : "off"); + + if (state == RFKILL_STATE_ON) { + pr_info("TOSA_BT: going ON\n"); + tosa_bt_on(data); + } else { + pr_info("TOSA_BT: going OFF\n"); + tosa_bt_off(data); + } + return 0; +} + +static int tosa_bt_probe(struct platform_device *dev) +{ + int rc; + struct rfkill *rfk; + + struct tosa_bt_data *data = dev->dev.platform_data; + + rc = gpio_request(data->gpio_reset, "Bluetooth reset"); + if (rc) + goto err_reset; + rc = gpio_direction_output(data->gpio_reset, 0); + if (rc) + goto err_reset_dir; + rc = gpio_request(data->gpio_pwr, "Bluetooth power"); + if (rc) + goto err_pwr; + rc = gpio_direction_output(data->gpio_pwr, 0); + if (rc) + goto err_pwr_dir; + + rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH); + if (!rfk) { + rc = -ENOMEM; + goto err_rfk_alloc; + } + + rfk->name = "tosa-bt"; + rfk->toggle_radio = tosa_bt_toggle_radio; + rfk->data = data; +#ifdef CONFIG_RFKILL_LEDS + rfk->led_trigger.name = "tosa-bt"; +#endif + + rc = rfkill_register(rfk); + if (rc) + goto err_rfkill; + + platform_set_drvdata(dev, rfk); + + return 0; + +err_rfkill: + if (rfk) + rfkill_free(rfk); + rfk = NULL; +err_rfk_alloc: + tosa_bt_off(data); +err_pwr_dir: + gpio_free(data->gpio_pwr); +err_pwr: +err_reset_dir: + gpio_free(data->gpio_reset); +err_reset: + return rc; +} + +static int __devexit tosa_bt_remove(struct platform_device *dev) +{ + struct tosa_bt_data *data = dev->dev.platform_data; + struct rfkill *rfk = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + + if (rfk) + rfkill_unregister(rfk); + rfk = NULL; + + tosa_bt_off(data); + + gpio_free(data->gpio_pwr); + gpio_free(data->gpio_reset); + + return 0; +} + +static struct platform_driver tosa_bt_driver = { + .probe = tosa_bt_probe, + .remove = __devexit_p(tosa_bt_remove), + + .driver = { + .name = "tosa-bt", + .owner = THIS_MODULE, + }, +}; + + +static int __init tosa_bt_init(void) +{ + return platform_driver_register(&tosa_bt_driver); +} + +static void __exit tosa_bt_exit(void) +{ + platform_driver_unregister(&tosa_bt_driver); +} + +module_init(tosa_bt_init); +module_exit(tosa_bt_exit); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index c2cbd66db81..2d49de572ba 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -18,30 +18,31 @@ #include <linux/major.h> #include <linux/fs.h> #include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/fb.h> #include <linux/mmc/host.h> +#include <linux/mfd/tc6393xb.h> +#include <linux/mfd/tmio.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> #include <linux/pm.h> -#include <linux/delay.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/pda_power.h> +#include <linux/rfkill.h> #include <asm/setup.h> -#include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> #include <asm/arch/mfp-pxa25x.h> #include <asm/arch/irda.h> #include <asm/arch/i2c.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> +#include <asm/arch/tosa_bt.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/arch/tosa.h> #include <asm/hardware/scoop.h> @@ -86,7 +87,7 @@ static unsigned long tosa_pin_config[] = { GPIO6_MMC_CLK, GPIO8_MMC_CS0, GPIO9_GPIO, /* Detect */ - // GPIO10 nSD_INT + GPIO10_GPIO, /* nSD_INT */ /* CF */ GPIO13_GPIO, /* CD_IRQ */ @@ -124,29 +125,25 @@ static unsigned long tosa_pin_config[] = { GPIO44_BTUART_CTS, GPIO45_BTUART_RTS, - /* IrDA */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - /* Keybd */ - GPIO58_GPIO, - GPIO59_GPIO, - GPIO60_GPIO, - GPIO61_GPIO, - GPIO62_GPIO, - GPIO63_GPIO, - GPIO64_GPIO, - GPIO65_GPIO, - GPIO66_GPIO, - GPIO67_GPIO, - GPIO68_GPIO, - GPIO69_GPIO, - GPIO70_GPIO, - GPIO71_GPIO, - GPIO72_GPIO, - GPIO73_GPIO, - GPIO74_GPIO, - GPIO75_GPIO, + GPIO58_GPIO | MFP_LPM_DRIVE_LOW, + GPIO59_GPIO | MFP_LPM_DRIVE_LOW, + GPIO60_GPIO | MFP_LPM_DRIVE_LOW, + GPIO61_GPIO | MFP_LPM_DRIVE_LOW, + GPIO62_GPIO | MFP_LPM_DRIVE_LOW, + GPIO63_GPIO | MFP_LPM_DRIVE_LOW, + GPIO64_GPIO | MFP_LPM_DRIVE_LOW, + GPIO65_GPIO | MFP_LPM_DRIVE_LOW, + GPIO66_GPIO | MFP_LPM_DRIVE_LOW, + GPIO67_GPIO | MFP_LPM_DRIVE_LOW, + GPIO68_GPIO | MFP_LPM_DRIVE_LOW, + GPIO69_GPIO | MFP_LPM_DRIVE_LOW, + GPIO70_GPIO | MFP_LPM_DRIVE_LOW, + GPIO71_GPIO | MFP_LPM_DRIVE_LOW, + GPIO72_GPIO | MFP_LPM_DRIVE_LOW, + GPIO73_GPIO | MFP_LPM_DRIVE_LOW, + GPIO74_GPIO | MFP_LPM_DRIVE_LOW, + GPIO75_GPIO | MFP_LPM_DRIVE_LOW, /* SPI */ GPIO81_SSP2_CLK_OUT, @@ -154,6 +151,17 @@ static unsigned long tosa_pin_config[] = { GPIO83_SSP2_TXD, }; +static unsigned long tosa_pin_irda_off[] = { + GPIO46_STUART_RXD, + GPIO47_GPIO | MFP_LPM_DRIVE_LOW, +}; + +static unsigned long tosa_pin_irda_on[] = { + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, +}; + + /* * SCOOP Device */ @@ -249,6 +257,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n"); + goto err_gpio_detect; + } + err = gpio_direction_input(TOSA_GPIO_nSD_DETECT); + if (err) + goto err_gpio_detect_dir; + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC/SD card detect", data); @@ -257,7 +274,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void goto err_irq; } - err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp"); + err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect"); if (err) { printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n"); goto err_gpio_wp; @@ -266,7 +283,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void if (err) goto err_gpio_wp_dir; - err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr"); + err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power"); if (err) { printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); goto err_gpio_pwr; @@ -275,8 +292,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void if (err) goto err_gpio_pwr_dir; + err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); + goto err_gpio_int; + } + err = gpio_direction_input(TOSA_GPIO_nSD_INT); + if (err) + goto err_gpio_int_dir; + return 0; +err_gpio_int_dir: + gpio_free(TOSA_GPIO_nSD_INT); +err_gpio_int: err_gpio_pwr_dir: gpio_free(TOSA_GPIO_PWR_ON); err_gpio_pwr: @@ -285,6 +314,9 @@ err_gpio_wp_dir: err_gpio_wp: free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); err_irq: +err_gpio_detect_dir: + gpio_free(TOSA_GPIO_nSD_DETECT); +err_gpio_detect: return err; } @@ -306,9 +338,11 @@ static int tosa_mci_get_ro(struct device *dev) static void tosa_mci_exit(struct device *dev, void *data) { + gpio_free(TOSA_GPIO_nSD_INT); gpio_free(TOSA_GPIO_PWR_ON); gpio_free(TOSA_GPIO_SD_WP); free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); + gpio_free(TOSA_GPIO_nSD_DETECT); } static struct pxamci_platform_data tosa_mci_platform_data = { @@ -322,29 +356,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = { /* * Irda */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0); + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off)); + gpio_direction_output(TOSA_GPIO_IRDA_TX, 0); + } else { + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_on)); + gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1); + } +} + static int tosa_irda_startup(struct device *dev) { int ret; + ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX"); + if (ret) + goto err_tx; + ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0); + if (ret) + goto err_tx_dir; + ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown"); if (ret) - return ret; + goto err_pwr; ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0); if (ret) - gpio_free(TOSA_GPIO_IR_POWERDWN); + goto err_pwr_dir; - return ret; - } + tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); -static void tosa_irda_shutdown(struct device *dev) -{ + return 0; + +err_pwr_dir: gpio_free(TOSA_GPIO_IR_POWERDWN); +err_pwr: +err_tx_dir: + gpio_free(TOSA_GPIO_IRDA_TX); +err_tx: + return ret; } -static void tosa_irda_transceiver_mode(struct device *dev, int mode) +static void tosa_irda_shutdown(struct device *dev) { - gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF)); + tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); + gpio_free(TOSA_GPIO_IR_POWERDWN); + gpio_free(TOSA_GPIO_IRDA_TX); } static struct pxaficp_platform_data tosa_ficp_platform_data = { @@ -355,6 +415,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = { }; /* + * Tosa AC IN + */ +static int tosa_power_init(struct device *dev) +{ + int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in"); + if (ret) + goto err_gpio_req; + + ret = gpio_direction_input(TOSA_GPIO_AC_IN); + if (ret) + goto err_gpio_in; + + return 0; + +err_gpio_in: + gpio_free(TOSA_GPIO_AC_IN); +err_gpio_req: + return ret; +} + +static void tosa_power_exit(struct device *dev) +{ + gpio_free(TOSA_GPIO_AC_IN); +} + +static int tosa_power_ac_online(void) +{ + return gpio_get_value(TOSA_GPIO_AC_IN) == 0; +} + +static char *tosa_ac_supplied_to[] = { + "main-battery", + "backup-battery", + "jacket-battery", +}; + +static struct pda_power_pdata tosa_power_data = { + .init = tosa_power_init, + .is_ac_online = tosa_power_ac_online, + .exit = tosa_power_exit, + .supplied_to = tosa_ac_supplied_to, + .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to), +}; + +static struct resource tosa_power_resource[] = { + { + .name = "ac", + .start = gpio_to_irq(TOSA_GPIO_AC_IN), + .end = gpio_to_irq(TOSA_GPIO_AC_IN), + .flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct platform_device tosa_power_device = { + .name = "pda-power", + .id = -1, + .dev.platform_data = &tosa_power_data, + .resource = tosa_power_resource, + .num_resources = ARRAY_SIZE(tosa_power_resource), +}; + +/* * Tosa Keyboard */ static struct platform_device tosakbd_device = { @@ -439,7 +563,7 @@ static struct gpio_led tosa_gpio_leds[] = { }, { .name = "tosa:blue:bluetooth", - .default_trigger = "none", + .default_trigger = "tosa-bt", .gpio = TOSA_GPIO_BT_LED, }, }; @@ -457,21 +581,184 @@ static struct platform_device tosaled_device = { }, }; +/* + * Toshiba Mobile IO Controller + */ +static struct resource tc6393xb_resources[] = { + [0] = { + .start = TOSA_LCDC_PHYS, + .end = TOSA_LCDC_PHYS + 0x3ffffff, + .flags = IORESOURCE_MEM, + }, + + [1] = { + .start = TOSA_IRQ_GPIO_TC6393XB_INT, + .end = TOSA_IRQ_GPIO_TC6393XB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + + +static int tosa_tc6393xb_enable(struct platform_device *dev) +{ + int rc; + + rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr"); + if (rc) + goto err_req_pclr; + rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend"); + if (rc) + goto err_req_suspend; + rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v"); + if (rc) + goto err_req_l3v; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0); + if (rc) + goto err_dir_l3v; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0); + if (rc) + goto err_dir_suspend; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0); + if (rc) + goto err_dir_pclr; + + mdelay(1); + + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1); + + mdelay(10); + + gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1); + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1); + + return 0; +err_dir_pclr: +err_dir_suspend: +err_dir_l3v: + gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); +err_req_l3v: + gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); +err_req_suspend: + gpio_free(TOSA_GPIO_TC6393XB_REST_IN); +err_req_pclr: + return rc; +} + +static int tosa_tc6393xb_disable(struct platform_device *dev) +{ + gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); + gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); + gpio_free(TOSA_GPIO_TC6393XB_REST_IN); + + return 0; +} + +static int tosa_tc6393xb_resume(struct platform_device *dev) +{ + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1); + mdelay(10); + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1); + mdelay(10); + + return 0; +} + +static int tosa_tc6393xb_suspend(struct platform_device *dev) +{ + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0); + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0); + return 0; +} + +static struct mtd_partition tosa_nand_partition[] = { + { + .name = "smf", + .offset = 0, + .size = 7 * 1024 * 1024, + }, + { + .name = "root", + .offset = MTDPART_OFS_APPEND, + .size = 28 * 1024 * 1024, + }, + { + .name = "home", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = { + .options = 0, + .offs = 4, + .len = 2, + .pattern = scan_ff_pattern +}; + +static struct tmio_nand_data tosa_tc6393xb_nand_config = { + .num_partitions = ARRAY_SIZE(tosa_nand_partition), + .partition = tosa_nand_partition, + .badblock_pattern = &tosa_tc6393xb_nand_bbt, +}; + +static struct tc6393xb_platform_data tosa_tc6393xb_setup = { + .scr_pll2cr = 0x0cc1, + .scr_gper = 0x3300, + .scr_gpo_dsr = + TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON), + .scr_gpo_doecr = + TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON), + + .irq_base = IRQ_BOARD_START, + .gpio_base = TOSA_TC6393XB_GPIO_BASE, + + .enable = tosa_tc6393xb_enable, + .disable = tosa_tc6393xb_disable, + .suspend = tosa_tc6393xb_suspend, + .resume = tosa_tc6393xb_resume, + + .nand_data = &tosa_tc6393xb_nand_config, +}; + + +static struct platform_device tc6393xb_device = { + .name = "tc6393xb", + .id = -1, + .dev = { + .platform_data = &tosa_tc6393xb_setup, + }, + .num_resources = ARRAY_SIZE(tc6393xb_resources), + .resource = tc6393xb_resources, +}; + +static struct tosa_bt_data tosa_bt_data = { + .gpio_pwr = TOSA_GPIO_BT_PWR_EN, + .gpio_reset = TOSA_GPIO_BT_RESET, +}; + +static struct platform_device tosa_bt_device = { + .name = "tosa-bt", + .id = -1, + .dev.platform_data = &tosa_bt_data, +}; + + static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, + &tc6393xb_device, + &tosa_power_device, &tosakbd_device, &tosa_gpio_keys_device, &tosaled_device, + &tosa_bt_device, }; static void tosa_poweroff(void) { - pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT); - GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET); - - mdelay(1000); - arm_machine_restart('h'); + arm_machine_restart('g'); } static void tosa_restart(char mode) @@ -485,10 +772,15 @@ static void tosa_restart(char mode) static void __init tosa_init(void) { + int dummy; + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off)); gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ + init_gpio_reset(TOSA_GPIO_ON_RESET); + pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; @@ -497,6 +789,10 @@ static void __init tosa_init(void) /* enable batt_fault */ PMCR = 0x01; + dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12); + dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); + dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); + pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 661a2358ac2..27f63d5d3a7 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = { [2] = { .start = IRQ_DM9000, .end = IRQ_DM9000, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index c56423373ff..4c4b5c4207c 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = { [2] = { .start = IRQ_VR1000_DM9000A, .end = IRQ_VR1000_DM9000A, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; @@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = { [2] = { .start = IRQ_VR1000_DM9000N, .end = IRQ_VR1000_DM9000N, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index fc97fe57ee6..b5809c51d13 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -103,7 +103,7 @@ static void clk_gpio27_disable(void) } static struct clk clk_gpio27 = { - .name = "GPIO27_CLK", + .name = "SA1111_CLK", .rate = 3686400, .enable = clk_gpio27_enable, .disable = clk_gpio27_disable, diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 6496eb645ce..2f772a3965c 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -225,26 +225,28 @@ static void __init collie_init(void) int ret = 0; /* cpu initialize */ - GAFR = ( GPIO_SSP_TXD | \ - GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \ - GPIO_32_768kHz ); - - GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \ - GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \ - GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \ - GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz ); - GPLR = GPIO_GPIO18; - - // PPC pin setting - PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \ - PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \ - PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM ); - - PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 ); - - GAFR |= GPIO_32_768kHz; - GPDR |= GPIO_32_768kHz; - TUCR = TUCR_32_768kHz; + GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | + GPIO_MCP_CLK | GPIO_32_768kHz; + + GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | + GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | + GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | + COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON | + COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz; + + PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | + PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | + PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; + + PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY | + COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC; + + PGSR = COLLIE_GPIO_nREMOCON_ON; + + PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4; + + PCFR = PCFR_OPDE; + platform_scoop_config = &collie_pcmcia_config; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 2946c193a7d..2db5580048d 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,6 +21,7 @@ #include <linux/clk.h> #include <linux/mutex.h> #include <linux/platform_device.h> +#include <linux/cpufreq.h> #include <asm/io.h> diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index f197bb3a236..2f01af5f64c 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size) /* rename any peripherals used differing from the s3c2410 */ + s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_i2c.name = "s3c2440-i2c"; s3c_device_nand.name = "s3c2440-nand"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 207a8b5a0c4..0be5630ff56 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Apr 19 11:23:38 2008 +# Last update: Mon Jul 7 16:25:39 2008 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -560,7 +560,6 @@ husky MACH_HUSKY HUSKY 543 boxer MACH_BOXER BOXER 544 shepherd MACH_SHEPHERD SHEPHERD 545 aml42800aa MACH_AML42800AA AML42800AA 546 -ml674001 MACH_MACH_TYPE_ML674001 MACH_TYPE_ML674001 547 lpc2294 MACH_LPC2294 LPC2294 548 switchgrass MACH_SWITCHGRASS SWITCHGRASS 549 ens_cmu MACH_ENS_CMU ENS_CMU 550 @@ -748,7 +747,6 @@ anubis MACH_ANUBIS ANUBIS 734 ite8152 MACH_ITE8152 ITE8152 735 lpc3xxx MACH_LPC3XXX LPC3XXX 736 puppeteer MACH_PUPPETEER PUPPETEER 737 -vt001 MACH_MACH_VADATECH MACH_VADATECH 738 e570 MACH_E570 E570 739 x50 MACH_X50 X50 740 recon MACH_RECON RECON 741 @@ -839,7 +837,7 @@ ccxp270 MACH_CCXP CCXP 825 omap_gsample MACH_OMAP_GSAMPLE OMAP_GSAMPLE 826 realview_eb MACH_REALVIEW_EB REALVIEW_EB 827 samoa MACH_SAMOA SAMOA 828 -t3xscale MACH_T3XSCALE T3XSCALE 829 +palmt3 MACH_PALMT3 PALMT3 829 i878 MACH_I878 I878 830 borzoi MACH_BORZOI BORZOI 831 gecko MACH_GECKO GECKO 832 @@ -895,7 +893,7 @@ mio8390 MACH_MIO8390 MIO8390 881 omi_board MACH_OMI_BOARD OMI_BOARD 882 mx21civ MACH_MX21CIV MX21CIV 883 mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884 -xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885 +palmtx MACH_PALMTX PALMTX 885 s3c2413 MACH_S3C2413 S3C2413 887 samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888 wg302v1 MACH_WG302V1 WG302V1 889 @@ -918,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905 apf9328 MACH_APF9328 APF9328 906 omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -xscale_treo650 MACH_XSCALE_PALMTREO650 XSCALE_PALMTREO650 909 +palmtreo650 MACH_PALMTREO650 PALMTREO650 909 acumen MACH_ACUMEN ACUMEN 910 xp100 MACH_XP100 XP100 911 fs2410 MACH_FS2410 FS2410 912 @@ -926,8 +924,8 @@ pxa270_cerf MACH_PXA270_CERF PXA270_CERF 913 sq2ftlpalm MACH_SQ2FTLPALM SQ2FTLPALM 914 bsemserver MACH_BSEMSERVER BSEMSERVER 915 netclient MACH_NETCLIENT NETCLIENT 916 -xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917 -xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918 +palmt5 MACH_PALMT5 PALMT5 917 +palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 mxc30030evb MACH_MXC30030EVB MXC30030EVB 920 rea_2d MACH_REA_2D REA_2D 921 @@ -1220,7 +1218,6 @@ empca400 MACH_EMPCA400 EMPCA400 1211 em7210 MACH_EM7210 EM7210 1212 htchermes MACH_HTCHERMES HTCHERMES 1213 eti_c1 MACH_ETI_C1 ETI_C1 1214 -mach_dep2410 MACH_MACH_DEP2410 MACH_DEP2410 1215 ac100 MACH_AC100 AC100 1216 sneetch MACH_SNEETCH SNEETCH 1217 studentmate MACH_STUDENTMATE STUDENTMATE 1218 @@ -1421,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417 cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 app3xx MACH_APP3XX APP3XX 1419 sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421 -xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422 -xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423 -xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424 +palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421 +palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422 +palmtreo750 MACH_PALMTREO750 PALMTREO750 1423 +palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424 ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 sarge MACH_SARGE SARGE 1426 a696 MACH_A696 A696 1427 @@ -1463,7 +1460,7 @@ artemis MACH_ARTEMIS ARTEMIS 1462 htctitan MACH_HTCTITAN HTCTITAN 1463 qranium MACH_QRANIUM QRANIUM 1464 adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465 -adx_medcom MACH_ADX_MEDINET ADX_MEDINET 1466 +adx_medcom MACH_ADX_MEDCOM ADX_MEDCOM 1466 bboard MACH_BBOARD BBOARD 1467 cambria MACH_CAMBRIA CAMBRIA 1468 mt7xxx MACH_MT7XXX MT7XXX 1469 @@ -1519,7 +1516,7 @@ wp188 MACH_WP188 WP188 1518 corsica MACH_CORSICA CORSICA 1519 bigeye MACH_BIGEYE BIGEYE 1520 tll5000 MACH_TLL5000 TLL5000 1522 -hni270 MACH_HNI_X270 HNI_X270 1523 +bebot MACH_BEBOT BEBOT 1523 qong MACH_QONG QONG 1524 tcompact MACH_TCOMPACT TCOMPACT 1525 puma5 MACH_PUMA5 PUMA5 1526 @@ -1636,7 +1633,6 @@ awlug4lcu MACH_AWLUG4LCU AWLUG4LCU 1637 palermoc MACH_PALERMOC PALERMOC 1638 omap_ldp MACH_OMAP_LDP OMAP_LDP 1639 ip500 MACH_IP500 IP500 1640 -mx35ads MACH_MACH_MX35ADS MACH_MX35ADS 1641 ase2 MACH_ASE2 ASE2 1642 mx35evb MACH_MX35EVB MX35EVB 1643 aml_m8050 MACH_AML_M8050 AML_M8050 1644 @@ -1647,7 +1643,7 @@ badger MACH_BADGER BADGER 1648 trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649 trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650 marlin MACH_MARLIN MARLIN 1651 -ts7800 MACH_TS7800 TS7800 1652 +ts78xx MACH_TS78XX TS78XX 1652 hpipaq214 MACH_HPIPAQ214 HPIPAQ214 1653 at572d940dcm MACH_AT572D940DCM AT572D940DCM 1654 ne1board MACH_NE1BOARD NE1BOARD 1655 @@ -1720,3 +1716,99 @@ htc_kaiser MACH_HTC_KAISER HTC_KAISER 1724 lg_ks20 MACH_LG_KS20 LG_KS20 1725 hhgps MACH_HHGPS HHGPS 1726 nokia_n810_wimax MACH_NOKIA_N810_WIMAX NOKIA_N810_WIMAX 1727 +insight MACH_INSIGHT INSIGHT 1728 +sapphire MACH_SAPPHIRE SAPPHIRE 1729 +csb637xo MACH_CSB637XO CSB637XO 1730 +evisiong MACH_EVISIONG EVISIONG 1731 +stmp37xx MACH_STMP37XX STMP37XX 1732 +stmp378x MACH_STMP38XX STMP38XX 1733 +tnt MACH_TNT TNT 1734 +tbxt MACH_TBXT TBXT 1735 +playmate MACH_PLAYMATE PLAYMATE 1736 +pns10 MACH_PNS10 PNS10 1737 +eznavi MACH_EZNAVI EZNAVI 1738 +ps4000 MACH_PS4000 PS4000 1739 +ezx_a780 MACH_EZX_A780 EZX_A780 1740 +ezx_e680 MACH_EZX_E680 EZX_E680 1741 +ezx_a1200 MACH_EZX_A1200 EZX_A1200 1742 +ezx_e6 MACH_EZX_E6 EZX_E6 1743 +ezx_e2 MACH_EZX_E2 EZX_E2 1744 +ezx_a910 MACH_EZX_A910 EZX_A910 1745 +cwmx31 MACH_CWMX31 CWMX31 1746 +sl2312 MACH_SL2312 SL2312 1747 +blenny MACH_BLENNY BLENNY 1748 +ds107 MACH_DS107 DS107 1749 +dsx07 MACH_DSX07 DSX07 1750 +picocom1 MACH_PICOCOM1 PICOCOM1 1751 +lynx_wolverine MACH_LYNX_WOLVERINE LYNX_WOLVERINE 1752 +ubisys_p9_sc19 MACH_UBISYS_P9_SC19 UBISYS_P9_SC19 1753 +kratos_low MACH_KRATOS_LOW KRATOS_LOW 1754 +m700 MACH_M700 M700 1755 +edmini_v2 MACH_EDMINI_V2 EDMINI_V2 1756 +zipit2 MACH_ZIPIT2 ZIPIT2 1757 +hslfemtocell MACH_HSLFEMTOCELL HSLFEMTOCELL 1758 +daintree_at91 MACH_DAINTREE_AT91 DAINTREE_AT91 1759 +sg560usb MACH_SG560USB SG560USB 1760 +omap3_pandora MACH_OMAP3_PANDORA OMAP3_PANDORA 1761 +usr8200 MACH_USR8200 USR8200 1762 +s1s65k MACH_S1S65K S1S65K 1763 +s2s65a MACH_S2S65A S2S65A 1764 +icore MACH_ICORE ICORE 1765 +mss2 MACH_MSS2 MSS2 1766 +belmont MACH_BELMONT BELMONT 1767 +asusp525 MACH_ASUSP525 ASUSP525 1768 +lb88rc8480 MACH_LB88RC8480 LB88RC8480 1769 +hipxa MACH_HIPXA HIPXA 1770 +mx25_3ds MACH_MX25_3DS MX25_3DS 1771 +m800 MACH_M800 M800 1772 +omap3530_lv_som MACH_OMAP3530_LV_SOM OMAP3530_LV_SOM 1773 +prima_evb MACH_PRIMA_EVB PRIMA_EVB 1774 +mx31bt1 MACH_MX31BT1 MX31BT1 1775 +atlas4_evb MACH_ATLAS4_EVB ATLAS4_EVB 1776 +mx31cicada MACH_MX31CICADA MX31CICADA 1777 +mi424wr MACH_MI424WR MI424WR 1778 +axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779 +at572d940deb MACH_AT572D940DEB AT572D940DEB 1780 +davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781 +ep9302 MACH_EP9302 EP9302 1782 +at572d940hfeb MACH_AT572D940HFEB AT572D940HFEB 1783 +cybook3 MACH_CYBOOK3 CYBOOK3 1784 +wdg002 MACH_WDG002 WDG002 1785 +sg560adsl MACH_SG560ADSL SG560ADSL 1786 +nextio_n2800_ica MACH_NEXTIO_N2800_ICA NEXTIO_N2800_ICA 1787 +marvell_newdb MACH_MARVELL_NEWDB MARVELL_NEWDB 1789 +vandihud MACH_VANDIHUD VANDIHUD 1790 +magx_e8 MACH_MAGX_E8 MAGX_E8 1791 +magx_z6 MACH_MAGX_Z6 MAGX_Z6 1792 +magx_v8 MACH_MAGX_V8 MAGX_V8 1793 +magx_u9 MACH_MAGX_U9 MAGX_U9 1794 +toughcf08 MACH_TOUGHCF08 TOUGHCF08 1795 +zw4400 MACH_ZW4400 ZW4400 1796 +marat91 MACH_MARAT91 MARAT91 1797 +overo MACH_OVERO OVERO 1798 +at2440evb MACH_AT2440EVB AT2440EVB 1799 +neocore926 MACH_NEOCORE926 NEOCORE926 1800 +wnr854t MACH_WNR854T WNR854T 1801 +imx27 MACH_IMX27 IMX27 1802 +moose_db MACH_MOOSE_DB MOOSE_DB 1803 +fab4 MACH_FAB4 FAB4 1804 +htcdiamond MACH_HTCDIAMOND HTCDIAMOND 1805 +fiona MACH_FIONA FIONA 1806 +mxc30030_x MACH_MXC30030_X MXC30030_X 1807 +bmp1000 MACH_BMP1000 BMP1000 1808 +logi9200 MACH_LOGI9200 LOGI9200 1809 +tqma31 MACH_TQMA31 TQMA31 1810 +ccw9p9215js MACH_CCW9P9215JS CCW9P9215JS 1811 +rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812 +sifmain MACH_SIFMAIN SIFMAIN 1813 +sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814 +cc9m2443js MACH_CC9M2443JS CC9M2443JS 1815 +xaria300 MACH_XARIA300 XARIA300 1816 +it9200 MACH_IT9200 IT9200 1817 +rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818 +kriss_sensor MACH_KRISS_SENSOR KRISS_SENSOR 1819 +pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820 +jade MACH_JADE JADE 1821 +ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822 +gprisc4 MACH_GPRISC4 GPRISC4 1823 +stamp9260 MACH_STAMP9260 STAMP9260 1824 |