diff options
Diffstat (limited to 'arch/arm')
81 files changed, 1162 insertions, 647 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5959e36c3b4..32ba00bd0a2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -10,9 +10,9 @@ config ARM default y help The ARM series is a line of low-power-consumption RISC chip designs - licensed by ARM ltd and targeted at embedded applications and + licensed by ARM Ltd and targeted at embedded applications and handhelds such as the Compaq IPAQ. ARM-based PCs are no longer - manufactured, but legacy ARM-based PC hardware remains popular in + manufactured, but legacy ARM-based PC hardware remains popular in Europe. There is an ARM Linux project with a web page at <http://www.arm.linux.org.uk/>. @@ -69,57 +69,77 @@ config GENERIC_ISA_DMA config FIQ bool +config ARCH_MTD_XIP + bool + source "init/Kconfig" menu "System Type" choice prompt "ARM system type" - default ARCH_RPC + default ARCH_VERSATILE config ARCH_CLPS7500 bool "Cirrus-CL-PS7500FE" select TIMER_ACORN select ISA + help + Support for the Cirrus Logic PS7500FE system-on-a-chip. config ARCH_CLPS711X bool "CLPS711x/EP721x-based" + help + Support for Cirrus Logic 711x/721x based boards. config ARCH_CO285 bool "Co-EBSA285" select FOOTBRIDGE select FOOTBRIDGE_ADDIN + help + Support for Intel's EBSA285 companion chip. config ARCH_EBSA110 bool "EBSA-110" select ISA help This is an evaluation board for the StrongARM processor available - from Digital. It has limited hardware on-board, including an onboard + from Digital. It has limited hardware on-board, including an Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE + help + Support for systems based on the DC21285 companion chip + ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. config ARCH_INTEGRATOR bool "Integrator" select ARM_AMBA select ICST525 + help + Support for ARM's Integrator platform. config ARCH_IOP3XX bool "IOP3xx-based" select PCI + help + Support for Intel's IOP3XX (XScale) family of processors. config ARCH_IXP4XX bool "IXP4xx-based" select DMABOUNCE select PCI + help + Support for Intel's IXP4XX (XScale) family of processors. config ARCH_IXP2000 bool "IXP2400/2800-based" select PCI + help + Support for Intel's IXP2400/2800 (XScale) family of processors. config ARCH_L7200 bool "LinkUp-L7200" @@ -136,6 +156,9 @@ config ARCH_L7200 config ARCH_PXA bool "PXA2xx-based" + select ARCH_MTD_XIP + help + Support for Intel's PXA2XX processor line. config ARCH_RPC bool "RiscPC" @@ -152,19 +175,25 @@ config ARCH_SA1100 bool "SA1100-based" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_MTD_XIP + help + Support for StrongARM 11x0 based boards. config ARCH_S3C2410 bool "Samsung S3C2410" help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or - the Samsung SMDK2410 development board (and derviatives). + the Samsung SMDK2410 development board (and derivatives). config ARCH_SHARK bool "Shark" select ISA select ISA_DMA select PCI + help + Support for the StrongARM based Digital DNARD machine, also known + as "Shark" (<http://www.shark-linux.de/shark.html>). config ARCH_LH7A40X bool "Sharp LH7A40X" @@ -176,6 +205,8 @@ config ARCH_LH7A40X config ARCH_OMAP bool "TI OMAP" + help + Support for TI's OMAP platform (OMAP1 and OMAP2). config ARCH_VERSATILE bool "Versatile" @@ -194,6 +225,8 @@ config ARCH_REALVIEW config ARCH_IMX bool "IMX" + help + Support for Motorola's i.MX family of processors (MX1, MXL). config ARCH_H720X bool "Hynix-HMS720x-based" @@ -210,8 +243,8 @@ config ARCH_AAEC2000 config ARCH_AT91RM9200 bool "AT91RM9200" help - Say Y here if you intend to run this kernel on an AT91RM9200-based - board. + Say Y here if you intend to run this kernel on an Atmel + AT91RM9200-based board. endchoice @@ -417,8 +450,8 @@ config AEABI To use this you need GCC version 4.0.0 or later. config OABI_COMPAT - bool "Allow old ABI binaries to run with this kernel" - depends on AEABI + bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" + depends on AEABI && EXPERIMENTAL default y help This option preserves the old syscall interface along with the @@ -766,6 +799,8 @@ source "drivers/i2c/Kconfig" source "drivers/spi/Kconfig" +source "drivers/w1/Kconfig" + source "drivers/hwmon/Kconfig" #source "drivers/l3/Kconfig" diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index 48b1e19b131..e851d86c212 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -128,19 +128,27 @@ EXPORT_SYMBOL(rtc_tm_to_time); /* * Calculate the next alarm time given the requested alarm time mask * and the current time. - * - * FIXME: for now, we just copy the alarm time because we're lazy (and - * is therefore buggy - setting a 10am alarm at 8pm will not result in - * the alarm triggering.) */ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm) { + unsigned long next_time; + unsigned long now_time; + next->tm_year = now->tm_year; next->tm_mon = now->tm_mon; next->tm_mday = now->tm_mday; next->tm_hour = alrm->tm_hour; next->tm_min = alrm->tm_min; next->tm_sec = alrm->tm_sec; + + rtc_tm_to_time(now, &now_time); + rtc_tm_to_time(next, &next_time); + + if (next_time < now_time) { + /* Advance one day */ + next_time += 60 * 60 * 24; + rtc_time_to_tm(next_time, next); + } } static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm) diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 5cdd13acf8f..1fe73d19888 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 20838ccf1da..b7d934cdb1b 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig index 6886001b536..4a8564f386a 100644 --- a/arch/arm/configs/bast_defconfig +++ b/arch/arm/configs/bast_defconfig @@ -14,8 +14,7 @@ CONFIG_GENERIC_IOMAP=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y +CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y # @@ -360,7 +359,6 @@ CONFIG_BLK_DEV_IDE_BAST=y # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support @@ -781,7 +779,6 @@ CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 15468a0cf70..c9aa878e610 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -13,8 +13,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y +CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -308,9 +307,7 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set CONFIG_MTD_OBSOLETE_CHIPS=y -# CONFIG_MTD_AMDSTD is not set CONFIG_MTD_SHARP=y -# CONFIG_MTD_JEDEC is not set # # Mapping drivers for chip access @@ -396,7 +393,6 @@ CONFIG_ATA_OVER_ETH=m # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support @@ -741,7 +737,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_SYSFS=y CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 885a3184830..94bd9932a40 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 95a96a5462a..1519124c550 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index 9592e3925c7..5fdaf3ce9d5 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -171,7 +171,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index d9d6bb86a6f..c67fc449a11 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 2dc9d499c7d..60d66e82c51 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index ea8f4b478fa..f54f3dcc5b3 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware ixdp2x01_clock=50000000" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 33f31080a98..6695b07cf1b 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,11 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc1 -# Sun Nov 13 17:41:24 2005 +# Linux kernel version: 2.6.16-rc2 +# Mon Feb 6 11:17:23 2006 # CONFIG_ARM=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -13,8 +12,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y +CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -29,27 +27,31 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -103,6 +105,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set # # S3C24XX Implementations @@ -161,7 +164,6 @@ CONFIG_CPU_TLB_V4WBI=y # Bus support # CONFIG_ISA=y -CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -173,6 +175,7 @@ CONFIG_ISA_DMA_API=y # # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -215,6 +218,8 @@ CONFIG_BINFMT_AOUT=y # Power management options # CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set CONFIG_APM=y # @@ -260,6 +265,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -277,7 +287,6 @@ CONFIG_TCP_CONG_BIC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -301,6 +310,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -413,8 +427,6 @@ CONFIG_PARPORT_1284=y # # Block devices # -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -473,7 +485,6 @@ CONFIG_BLK_DEV_IDE_BAST=y # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support @@ -504,7 +515,6 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y @@ -609,11 +619,11 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set -# CONFIG_ESPSERIAL is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set @@ -627,6 +637,7 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y @@ -689,6 +700,7 @@ CONFIG_S3C2410_RTC=y # # TPM devices # +# CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # @@ -733,6 +745,12 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Hardware Monitoring support # CONFIG_HWMON=y @@ -865,6 +883,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y CONFIG_INOTIFY=y @@ -896,10 +915,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -968,6 +987,7 @@ CONFIG_SOLARIS_X86_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1023,12 +1043,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1037,6 +1058,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 0abbce8c70b..b324dcac1c5 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -57,7 +57,9 @@ int main(void) DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); - DEFINE(TI_IWMMXT_STATE, (offsetof(struct thread_info, fpstate)+4)&~7); +#ifdef CONFIG_IWMMXT + DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt)); +#endif BLANK(); DEFINE(S_R0, offsetof(struct pt_regs, ARM_r0)); DEFINE(S_R1, offsetof(struct pt_regs, ARM_r1)); diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 75e6f9a9471..3173924a9b6 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -7,337 +7,334 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * This file is included twice in entry-common.S + * This file is included thrice in entry-common.S */ -#ifndef NR_syscalls -#define NR_syscalls 328 -#else - -100: -/* 0 */ .long sys_restart_syscall - .long sys_exit - .long sys_fork_wrapper - .long sys_read - .long sys_write -/* 5 */ .long sys_open - .long sys_close - .long sys_ni_syscall /* was sys_waitpid */ - .long sys_creat - .long sys_link -/* 10 */ .long sys_unlink - .long sys_execve_wrapper - .long sys_chdir - .long OBSOLETE(sys_time) /* used by libc4 */ - .long sys_mknod -/* 15 */ .long sys_chmod - .long sys_lchown16 - .long sys_ni_syscall /* was sys_break */ - .long sys_ni_syscall /* was sys_stat */ - .long sys_lseek -/* 20 */ .long sys_getpid - .long sys_mount - .long OBSOLETE(sys_oldumount) /* used by libc4 */ - .long sys_setuid16 - .long sys_getuid16 -/* 25 */ .long OBSOLETE(sys_stime) - .long sys_ptrace - .long OBSOLETE(sys_alarm) /* used by libc4 */ - .long sys_ni_syscall /* was sys_fstat */ - .long sys_pause -/* 30 */ .long OBSOLETE(sys_utime) /* used by libc4 */ - .long sys_ni_syscall /* was sys_stty */ - .long sys_ni_syscall /* was sys_getty */ - .long sys_access - .long sys_nice -/* 35 */ .long sys_ni_syscall /* was sys_ftime */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir -/* 40 */ .long sys_rmdir - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* was sys_prof */ -/* 45 */ .long sys_brk - .long sys_setgid16 - .long sys_getgid16 - .long sys_ni_syscall /* was sys_signal */ - .long sys_geteuid16 -/* 50 */ .long sys_getegid16 - .long sys_acct - .long sys_umount - .long sys_ni_syscall /* was sys_lock */ - .long sys_ioctl -/* 55 */ .long sys_fcntl - .long sys_ni_syscall /* was sys_mpx */ - .long sys_setpgid - .long sys_ni_syscall /* was sys_ulimit */ - .long sys_ni_syscall /* was sys_olduname */ -/* 60 */ .long sys_umask - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid -/* 65 */ .long sys_getpgrp - .long sys_setsid - .long sys_sigaction - .long sys_ni_syscall /* was sys_sgetmask */ - .long sys_ni_syscall /* was sys_ssetmask */ -/* 70 */ .long sys_setreuid16 - .long sys_setregid16 - .long sys_sigsuspend_wrapper - .long sys_sigpending - .long sys_sethostname -/* 75 */ .long sys_setrlimit - .long OBSOLETE(sys_old_getrlimit) /* used by libc4 */ - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday -/* 80 */ .long sys_getgroups16 - .long sys_setgroups16 - .long OBSOLETE(old_select) /* used by libc4 */ - .long sys_symlink - .long sys_ni_syscall /* was sys_lstat */ -/* 85 */ .long sys_readlink - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long OBSOLETE(old_readdir) /* used by libc4 */ -/* 90 */ .long OBSOLETE(old_mmap) /* used by libc4 */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod -/* 95 */ .long sys_fchown16 - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* was sys_profil */ - .long sys_statfs -/* 100 */ .long sys_fstatfs - .long sys_ni_syscall - .long OBSOLETE(sys_socketcall) - .long sys_syslog - .long sys_setitimer -/* 105 */ .long sys_getitimer - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_ni_syscall /* was sys_uname */ -/* 110 */ .long sys_ni_syscall /* was sys_iopl */ - .long sys_vhangup - .long sys_ni_syscall - .long OBSOLETE(sys_syscall) /* call a syscall */ - .long sys_wait4 -/* 115 */ .long sys_swapoff - .long sys_sysinfo - .long OBSOLETE(ABI(sys_ipc, sys_oabi_ipc)) - .long sys_fsync - .long sys_sigreturn_wrapper -/* 120 */ .long sys_clone_wrapper - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall - .long sys_adjtimex -/* 125 */ .long sys_mprotect - .long sys_sigprocmask - .long sys_ni_syscall /* was sys_create_module */ - .long sys_init_module - .long sys_delete_module -/* 130 */ .long sys_ni_syscall /* was sys_get_kernel_syms */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush -/* 135 */ .long sys_sysfs - .long sys_personality - .long sys_ni_syscall /* .long _sys_afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 -/* 140 */ .long sys_llseek - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync -/* 145 */ .long sys_readv - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl -/* 150 */ .long sys_mlock - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam -/* 155 */ .long sys_sched_getparam - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max -/* 160 */ .long sys_sched_get_priority_min - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_arm_mremap - .long sys_setresuid16 -/* 165 */ .long sys_getresuid16 - .long sys_ni_syscall - .long sys_ni_syscall /* was sys_query_module */ - .long sys_poll - .long sys_nfsservctl -/* 170 */ .long sys_setresgid16 - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn_wrapper - .long sys_rt_sigaction -/* 175 */ .long sys_rt_sigprocmask - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend_wrapper -/* 180 */ .long ABI(sys_pread64, sys_oabi_pread64) - .long ABI(sys_pwrite64, sys_oabi_pwrite64) - .long sys_chown16 - .long sys_getcwd - .long sys_capget -/* 185 */ .long sys_capset - .long sys_sigaltstack_wrapper - .long sys_sendfile - .long sys_ni_syscall - .long sys_ni_syscall -/* 190 */ .long sys_vfork_wrapper - .long sys_getrlimit - .long sys_mmap2 - .long ABI(sys_truncate64, sys_oabi_truncate64) - .long ABI(sys_ftruncate64, sys_oabi_ftruncate64) -/* 195 */ .long ABI(sys_stat64, sys_oabi_stat64) - .long ABI(sys_lstat64, sys_oabi_lstat64) - .long ABI(sys_fstat64, sys_oabi_fstat64) - .long sys_lchown - .long sys_getuid -/* 200 */ .long sys_getgid - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid -/* 205 */ .long sys_getgroups - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid -/* 210 */ .long sys_setresgid - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid -/* 215 */ .long sys_setfsuid - .long sys_setfsgid - .long sys_getdents64 - .long sys_pivot_root - .long sys_mincore -/* 220 */ .long sys_madvise - .long ABI(sys_fcntl64, sys_oabi_fcntl64) - .long sys_ni_syscall /* TUX */ - .long sys_ni_syscall - .long sys_gettid -/* 225 */ .long ABI(sys_readahead, sys_oabi_readahead) - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr - .long sys_getxattr -/* 230 */ .long sys_lgetxattr - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr - .long sys_flistxattr -/* 235 */ .long sys_removexattr - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_tkill - .long sys_sendfile64 -/* 240 */ .long sys_futex - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_io_setup - .long sys_io_destroy -/* 245 */ .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel - .long sys_exit_group - .long sys_lookup_dcookie -/* 250 */ .long sys_epoll_create - .long ABI(sys_epoll_ctl, sys_oabi_epoll_ctl) - .long ABI(sys_epoll_wait, sys_oabi_epoll_wait) - .long sys_remap_file_pages - .long sys_ni_syscall /* sys_set_thread_area */ -/* 255 */ .long sys_ni_syscall /* sys_get_thread_area */ - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime - .long sys_timer_gettime -/* 260 */ .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime - .long sys_clock_getres -/* 265 */ .long sys_clock_nanosleep - .long sys_statfs64_wrapper - .long sys_fstatfs64_wrapper - .long sys_tgkill - .long sys_utimes -/* 270 */ .long sys_arm_fadvise64_64 - .long sys_pciconfig_iobase - .long sys_pciconfig_read - .long sys_pciconfig_write - .long sys_mq_open -/* 275 */ .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive - .long sys_mq_notify - .long sys_mq_getsetattr -/* 280 */ .long sys_waitid - .long sys_socket - .long sys_bind - .long sys_connect - .long sys_listen -/* 285 */ .long sys_accept - .long sys_getsockname - .long sys_getpeername - .long sys_socketpair - .long sys_send -/* 290 */ .long sys_sendto - .long sys_recv - .long sys_recvfrom - .long sys_shutdown - .long sys_setsockopt -/* 295 */ .long sys_getsockopt - .long sys_sendmsg - .long sys_recvmsg - .long ABI(sys_semop, sys_oabi_semop) - .long sys_semget -/* 300 */ .long sys_semctl - .long sys_msgsnd - .long sys_msgrcv - .long sys_msgget - .long sys_msgctl -/* 305 */ .long sys_shmat - .long sys_shmdt - .long sys_shmget - .long sys_shmctl - .long sys_add_key -/* 310 */ .long sys_request_key - .long sys_keyctl - .long ABI(sys_semtimedop, sys_oabi_semtimedop) -/* vserver */ .long sys_ni_syscall - .long sys_ioprio_set -/* 315 */ .long sys_ioprio_get - .long sys_inotify_init - .long sys_inotify_add_watch - .long sys_inotify_rm_watch - .long sys_mbind -/* 320 */ .long sys_get_mempolicy - .long sys_set_mempolicy - - .rept NR_syscalls - (. - 100b) / 4 - .long sys_ni_syscall - .endr +/* 0 */ CALL(sys_restart_syscall) + CALL(sys_exit) + CALL(sys_fork_wrapper) + CALL(sys_read) + CALL(sys_write) +/* 5 */ CALL(sys_open) + CALL(sys_close) + CALL(sys_ni_syscall) /* was sys_waitpid */ + CALL(sys_creat) + CALL(sys_link) +/* 10 */ CALL(sys_unlink) + CALL(sys_execve_wrapper) + CALL(sys_chdir) + CALL(OBSOLETE(sys_time)) /* used by libc4 */ + CALL(sys_mknod) +/* 15 */ CALL(sys_chmod) + CALL(sys_lchown16) + CALL(sys_ni_syscall) /* was sys_break */ + CALL(sys_ni_syscall) /* was sys_stat */ + CALL(sys_lseek) +/* 20 */ CALL(sys_getpid) + CALL(sys_mount) + CALL(OBSOLETE(sys_oldumount)) /* used by libc4 */ + CALL(sys_setuid16) + CALL(sys_getuid16) +/* 25 */ CALL(OBSOLETE(sys_stime)) + CALL(sys_ptrace) + CALL(OBSOLETE(sys_alarm)) /* used by libc4 */ + CALL(sys_ni_syscall) /* was sys_fstat */ + CALL(sys_pause) +/* 30 */ CALL(OBSOLETE(sys_utime)) /* used by libc4 */ + CALL(sys_ni_syscall) /* was sys_stty */ + CALL(sys_ni_syscall) /* was sys_getty */ + CALL(sys_access) + CALL(sys_nice) +/* 35 */ CALL(sys_ni_syscall) /* was sys_ftime */ + CALL(sys_sync) + CALL(sys_kill) + CALL(sys_rename) + CALL(sys_mkdir) +/* 40 */ CALL(sys_rmdir) + CALL(sys_dup) + CALL(sys_pipe) + CALL(sys_times) + CALL(sys_ni_syscall) /* was sys_prof */ +/* 45 */ CALL(sys_brk) + CALL(sys_setgid16) + CALL(sys_getgid16) + CALL(sys_ni_syscall) /* was sys_signal */ + CALL(sys_geteuid16) +/* 50 */ CALL(sys_getegid16) + CALL(sys_acct) + CALL(sys_umount) + CALL(sys_ni_syscall) /* was sys_lock */ + CALL(sys_ioctl) +/* 55 */ CALL(sys_fcntl) + CALL(sys_ni_syscall) /* was sys_mpx */ + CALL(sys_setpgid) + CALL(sys_ni_syscall) /* was sys_ulimit */ + CALL(sys_ni_syscall) /* was sys_olduname */ +/* 60 */ CALL(sys_umask) + CALL(sys_chroot) + CALL(sys_ustat) + CALL(sys_dup2) + CALL(sys_getppid) +/* 65 */ CALL(sys_getpgrp) + CALL(sys_setsid) + CALL(sys_sigaction) + CALL(sys_ni_syscall) /* was sys_sgetmask */ + CALL(sys_ni_syscall) /* was sys_ssetmask */ +/* 70 */ CALL(sys_setreuid16) + CALL(sys_setregid16) + CALL(sys_sigsuspend_wrapper) + CALL(sys_sigpending) + CALL(sys_sethostname) +/* 75 */ CALL(sys_setrlimit) + CALL(OBSOLETE(sys_old_getrlimit)) /* used by libc4 */ + CALL(sys_getrusage) + CALL(sys_gettimeofday) + CALL(sys_settimeofday) +/* 80 */ CALL(sys_getgroups16) + CALL(sys_setgroups16) + CALL(OBSOLETE(old_select)) /* used by libc4 */ + CALL(sys_symlink) + CALL(sys_ni_syscall) /* was sys_lstat */ +/* 85 */ CALL(sys_readlink) + CALL(sys_uselib) + CALL(sys_swapon) + CALL(sys_reboot) + CALL(OBSOLETE(old_readdir)) /* used by libc4 */ +/* 90 */ CALL(OBSOLETE(old_mmap)) /* used by libc4 */ + CALL(sys_munmap) + CALL(sys_truncate) + CALL(sys_ftruncate) + CALL(sys_fchmod) +/* 95 */ CALL(sys_fchown16) + CALL(sys_getpriority) + CALL(sys_setpriority) + CALL(sys_ni_syscall) /* was sys_profil */ + CALL(sys_statfs) +/* 100 */ CALL(sys_fstatfs) + CALL(sys_ni_syscall) + CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall))) + CALL(sys_syslog) + CALL(sys_setitimer) +/* 105 */ CALL(sys_getitimer) + CALL(sys_newstat) + CALL(sys_newlstat) + CALL(sys_newfstat) + CALL(sys_ni_syscall) /* was sys_uname */ +/* 110 */ CALL(sys_ni_syscall) /* was sys_iopl */ + CALL(sys_vhangup) + CALL(sys_ni_syscall) + CALL(OBSOLETE(sys_syscall)) /* call a syscall */ + CALL(sys_wait4) +/* 115 */ CALL(sys_swapoff) + CALL(sys_sysinfo) + CALL(OBSOLETE(ABI(sys_ipc, sys_oabi_ipc))) + CALL(sys_fsync) + CALL(sys_sigreturn_wrapper) +/* 120 */ CALL(sys_clone_wrapper) + CALL(sys_setdomainname) + CALL(sys_newuname) + CALL(sys_ni_syscall) + CALL(sys_adjtimex) +/* 125 */ CALL(sys_mprotect) + CALL(sys_sigprocmask) + CALL(sys_ni_syscall) /* was sys_create_module */ + CALL(sys_init_module) + CALL(sys_delete_module) +/* 130 */ CALL(sys_ni_syscall) /* was sys_get_kernel_syms */ + CALL(sys_quotactl) + CALL(sys_getpgid) + CALL(sys_fchdir) + CALL(sys_bdflush) +/* 135 */ CALL(sys_sysfs) + CALL(sys_personality) + CALL(sys_ni_syscall) /* CALL(_sys_afs_syscall) */ + CALL(sys_setfsuid16) + CALL(sys_setfsgid16) +/* 140 */ CALL(sys_llseek) + CALL(sys_getdents) + CALL(sys_select) + CALL(sys_flock) + CALL(sys_msync) +/* 145 */ CALL(sys_readv) + CALL(sys_writev) + CALL(sys_getsid) + CALL(sys_fdatasync) + CALL(sys_sysctl) +/* 150 */ CALL(sys_mlock) + CALL(sys_munlock) + CALL(sys_mlockall) + CALL(sys_munlockall) + CALL(sys_sched_setparam) +/* 155 */ CALL(sys_sched_getparam) + CALL(sys_sched_setscheduler) + CALL(sys_sched_getscheduler) + CALL(sys_sched_yield) + CALL(sys_sched_get_priority_max) +/* 160 */ CALL(sys_sched_get_priority_min) + CALL(sys_sched_rr_get_interval) + CALL(sys_nanosleep) + CALL(sys_arm_mremap) + CALL(sys_setresuid16) +/* 165 */ CALL(sys_getresuid16) + CALL(sys_ni_syscall) + CALL(sys_ni_syscall) /* was sys_query_module */ + CALL(sys_poll) + CALL(sys_nfsservctl) +/* 170 */ CALL(sys_setresgid16) + CALL(sys_getresgid16) + CALL(sys_prctl) + CALL(sys_rt_sigreturn_wrapper) + CALL(sys_rt_sigaction) +/* 175 */ CALL(sys_rt_sigprocmask) + CALL(sys_rt_sigpending) + CALL(sys_rt_sigtimedwait) + CALL(sys_rt_sigqueueinfo) + CALL(sys_rt_sigsuspend_wrapper) +/* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64)) + CALL(ABI(sys_pwrite64, sys_oabi_pwrite64)) + CALL(sys_chown16) + CALL(sys_getcwd) + CALL(sys_capget) +/* 185 */ CALL(sys_capset) + CALL(sys_sigaltstack_wrapper) + CALL(sys_sendfile) + CALL(sys_ni_syscall) + CALL(sys_ni_syscall) +/* 190 */ CALL(sys_vfork_wrapper) + CALL(sys_getrlimit) + CALL(sys_mmap2) + CALL(ABI(sys_truncate64, sys_oabi_truncate64)) + CALL(ABI(sys_ftruncate64, sys_oabi_ftruncate64)) +/* 195 */ CALL(ABI(sys_stat64, sys_oabi_stat64)) + CALL(ABI(sys_lstat64, sys_oabi_lstat64)) + CALL(ABI(sys_fstat64, sys_oabi_fstat64)) + CALL(sys_lchown) + CALL(sys_getuid) +/* 200 */ CALL(sys_getgid) + CALL(sys_geteuid) + CALL(sys_getegid) + CALL(sys_setreuid) + CALL(sys_setregid) +/* 205 */ CALL(sys_getgroups) + CALL(sys_setgroups) + CALL(sys_fchown) + CALL(sys_setresuid) + CALL(sys_getresuid) +/* 210 */ CALL(sys_setresgid) + CALL(sys_getresgid) + CALL(sys_chown) + CALL(sys_setuid) + CALL(sys_setgid) +/* 215 */ CALL(sys_setfsuid) + CALL(sys_setfsgid) + CALL(sys_getdents64) + CALL(sys_pivot_root) + CALL(sys_mincore) +/* 220 */ CALL(sys_madvise) + CALL(ABI(sys_fcntl64, sys_oabi_fcntl64)) + CALL(sys_ni_syscall) /* TUX */ + CALL(sys_ni_syscall) + CALL(sys_gettid) +/* 225 */ CALL(ABI(sys_readahead, sys_oabi_readahead)) + CALL(sys_setxattr) + CALL(sys_lsetxattr) + CALL(sys_fsetxattr) + CALL(sys_getxattr) +/* 230 */ CALL(sys_lgetxattr) + CALL(sys_fgetxattr) + CALL(sys_listxattr) + CALL(sys_llistxattr) + CALL(sys_flistxattr) +/* 235 */ CALL(sys_removexattr) + CALL(sys_lremovexattr) + CALL(sys_fremovexattr) + CALL(sys_tkill) + CALL(sys_sendfile64) +/* 240 */ CALL(sys_futex) + CALL(sys_sched_setaffinity) + CALL(sys_sched_getaffinity) + CALL(sys_io_setup) + CALL(sys_io_destroy) +/* 245 */ CALL(sys_io_getevents) + CALL(sys_io_submit) + CALL(sys_io_cancel) + CALL(sys_exit_group) + CALL(sys_lookup_dcookie) +/* 250 */ CALL(sys_epoll_create) + CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl)) + CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait)) + CALL(sys_remap_file_pages) + CALL(sys_ni_syscall) /* sys_set_thread_area */ +/* 255 */ CALL(sys_ni_syscall) /* sys_get_thread_area */ + CALL(sys_set_tid_address) + CALL(sys_timer_create) + CALL(sys_timer_settime) + CALL(sys_timer_gettime) +/* 260 */ CALL(sys_timer_getoverrun) + CALL(sys_timer_delete) + CALL(sys_clock_settime) + CALL(sys_clock_gettime) + CALL(sys_clock_getres) +/* 265 */ CALL(sys_clock_nanosleep) + CALL(sys_statfs64_wrapper) + CALL(sys_fstatfs64_wrapper) + CALL(sys_tgkill) + CALL(sys_utimes) +/* 270 */ CALL(sys_arm_fadvise64_64) + CALL(sys_pciconfig_iobase) + CALL(sys_pciconfig_read) + CALL(sys_pciconfig_write) + CALL(sys_mq_open) +/* 275 */ CALL(sys_mq_unlink) + CALL(sys_mq_timedsend) + CALL(sys_mq_timedreceive) + CALL(sys_mq_notify) + CALL(sys_mq_getsetattr) +/* 280 */ CALL(sys_waitid) + CALL(sys_socket) + CALL(ABI(sys_bind, sys_oabi_bind)) + CALL(ABI(sys_connect, sys_oabi_connect)) + CALL(sys_listen) +/* 285 */ CALL(sys_accept) + CALL(sys_getsockname) + CALL(sys_getpeername) + CALL(sys_socketpair) + CALL(sys_send) +/* 290 */ CALL(ABI(sys_sendto, sys_oabi_sendto)) + CALL(sys_recv) + CALL(sys_recvfrom) + CALL(sys_shutdown) + CALL(sys_setsockopt) +/* 295 */ CALL(sys_getsockopt) + CALL(ABI(sys_sendmsg, sys_oabi_sendmsg)) + CALL(sys_recvmsg) + CALL(ABI(sys_semop, sys_oabi_semop)) + CALL(sys_semget) +/* 300 */ CALL(sys_semctl) + CALL(sys_msgsnd) + CALL(sys_msgrcv) + CALL(sys_msgget) + CALL(sys_msgctl) +/* 305 */ CALL(sys_shmat) + CALL(sys_shmdt) + CALL(sys_shmget) + CALL(sys_shmctl) + CALL(sys_add_key) +/* 310 */ CALL(sys_request_key) + CALL(sys_keyctl) + CALL(ABI(sys_semtimedop, sys_oabi_semtimedop)) +/* vserver */ CALL(sys_ni_syscall) + CALL(sys_ioprio_set) +/* 315 */ CALL(sys_ioprio_get) + CALL(sys_inotify_init) + CALL(sys_inotify_add_watch) + CALL(sys_inotify_rm_watch) + CALL(sys_mbind) +/* 320 */ CALL(sys_get_mempolicy) + CALL(sys_set_mempolicy) +#ifndef syscalls_counted +.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls +#define syscalls_counted #endif +.rept syscalls_padding + CALL(sys_ni_syscall) +.endr diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d401d908c46..ec48d70c6d8 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -333,10 +333,14 @@ __pabt_svc: @ from the exception stack #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#ifndef CONFIG_MMU +#warning "NPTL on non MMU needs fixing" +#else @ make sure our user space atomic helper is aborted cmp r2, #TASK_SIZE bichs r3, r3, #PSR_Z_BIT #endif +#endif @ @ We are now ready to fill in the remaining blanks on the stack: @@ -562,7 +566,7 @@ ENTRY(__switch_to) ldr r6, [r2, #TI_CPU_DOMAIN]! #endif #if __LINUX_ARM_ARCH__ >= 6 -#ifdef CONFIG_CPU_MPCORE +#ifdef CONFIG_CPU_32v6K clrex #else strex r5, r4, [ip] @ Clear exclusive monitor @@ -705,7 +709,12 @@ __kuser_memory_barrier: @ 0xffff0fa0 * The C flag is also set if *ptr was changed to allow for assembly * optimization in the calling code. * - * Note: this routine already includes memory barriers as needed. + * Notes: + * + * - This routine already includes memory barriers as needed. + * + * - A failure might be transient, i.e. it is possible, although unlikely, + * that "failure" be returned even if *ptr == oldval. * * For example, a user space atomic_add implementation could look like this: * @@ -756,12 +765,18 @@ __kuser_cmpxchg: @ 0xffff0fc0 * exception happening just after the str instruction which would * clear the Z flag although the exchange was done. */ +#ifdef CONFIG_MMU teq ip, ip @ set Z flag ldr ip, [r2] @ load current val add r3, r2, #1 @ prepare store ptr teqeq ip, r0 @ compare with oldval if still allowed streq r1, [r3, #-1]! @ store newval if still allowed subs r0, r2, r3 @ if r2 == r3 the str occured +#else +#warning "NPTL on non MMU needs fixing" + mov r0, #-1 + adds r0, r0, #0 +#endif mov pc, lr #else diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 2b92ce85f97..dbcb11a31f7 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -87,7 +87,11 @@ ENTRY(ret_from_fork) b ret_slow_syscall + .equ NR_syscalls,0 +#define CALL(x) .equ NR_syscalls,NR_syscalls+1 #include "calls.S" +#undef CALL +#define CALL(x) .long x /*============================================================================= * SWI handler diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 7b6256bb590..bc9e2f8ae32 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -610,15 +610,12 @@ static int ptrace_setfpregs(struct task_struct *tsk, void __user *ufp) static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp) { struct thread_info *thread = task_thread_info(tsk); - void *ptr = &thread->fpstate; if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT)) return -ENODATA; iwmmxt_task_disable(thread); /* force it to ram */ - /* The iWMMXt state is stored doubleword-aligned. */ - if (((long) ptr) & 4) - ptr += 4; - return copy_to_user(ufp, ptr, 0x98) ? -EFAULT : 0; + return copy_to_user(ufp, &thread->fpstate.iwmmxt, IWMMXT_SIZE) + ? -EFAULT : 0; } /* @@ -627,15 +624,12 @@ static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp) static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp) { struct thread_info *thread = task_thread_info(tsk); - void *ptr = &thread->fpstate; if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT)) return -EACCES; iwmmxt_task_release(thread); /* force a reload */ - /* The iWMMXt state is stored doubleword-aligned. */ - if (((long) ptr) & 4) - ptr += 4; - return copy_from_user(ptr, ufp, 0x98) ? -EFAULT : 0; + return copy_from_user(&thead->fpstate.iwmmxt, ufp, IWMMXT_SIZE) + ? -EFAULT : 0; } #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c45d10d07bd..68273b4dc88 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -23,6 +23,7 @@ #include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/interrupt.h> +#include <linux/smp.h> #include <asm/cpu.h> #include <asm/elf.h> @@ -771,6 +772,10 @@ void __init setup_arch(char **cmdline_p) paging_init(&meminfo, mdesc); request_standard_resources(&meminfo, mdesc); +#ifdef CONFIG_SMP + smp_init_cpus(); +#endif + cpu_init(); /* diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 7338948bd7d..02aa300c463 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -338,7 +338,6 @@ void __init smp_prepare_boot_cpu(void) per_cpu(cpu_data, cpu).idle = current; - cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); cpu_set(cpu, cpu_online_map); } diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index eafa8e5284a..8e2f9bc3368 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -59,6 +59,17 @@ * struct sembuf loses its padding with EABI. Since arrays of them are * used they have to be copyed to remove the padding. Compatibility wrappers * provided below. + * + * sys_bind: + * sys_connect: + * sys_sendmsg: + * sys_sendto: + * sys_socketcall: + * + * struct sockaddr_un loses its padding with EABI. Since the size of the + * structure is used as a validation test in unix_mkname(), we need to + * change the length argument to 110 whenever it is 112. Compatibility + * wrappers provided below. */ #include <linux/syscalls.h> @@ -67,6 +78,8 @@ #include <linux/fcntl.h> #include <linux/eventpoll.h> #include <linux/sem.h> +#include <linux/socket.h> +#include <linux/net.h> #include <asm/ipc.h> #include <asm/uaccess.h> @@ -337,3 +350,91 @@ asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third, return sys_ipc(call, first, second, third, ptr, fifth); } } + +asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_bind(fd, addr, addrlen); +} + +asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_connect(fd, addr, addrlen); +} + +asmlinkage long sys_oabi_sendto(int fd, void __user *buff, + size_t len, unsigned flags, + struct sockaddr __user *addr, + int addrlen) +{ + sa_family_t sa_family; + if (addrlen == 112 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + addrlen = 110; + return sys_sendto(fd, buff, len, flags, addr, addrlen); +} + +asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned flags) +{ + struct sockaddr __user *addr; + int msg_namelen; + sa_family_t sa_family; + if (msg && + get_user(msg_namelen, &msg->msg_namelen) == 0 && + msg_namelen == 112 && + get_user(addr, &msg->msg_name) == 0 && + get_user(sa_family, &addr->sa_family) == 0 && + sa_family == AF_UNIX) + { + /* + * HACK ALERT: there is a limit to how much backward bending + * we should do for what is actually a transitional + * compatibility layer. This already has known flaws with + * a few ioctls that we don't intend to fix. Therefore + * consider this blatent hack as another one... and take care + * to run for cover. In most cases it will "just work fine". + * If it doesn't, well, tough. + */ + put_user(110, &msg->msg_namelen); + } + return sys_sendmsg(fd, msg, flags); +} + +asmlinkage long sys_oabi_socketcall(int call, unsigned long __user *args) +{ + unsigned long r = -EFAULT, a[6]; + + switch (call) { + case SYS_BIND: + if (copy_from_user(a, args, 3 * sizeof(long)) == 0) + r = sys_oabi_bind(a[0], (struct sockaddr __user *)a[1], a[2]); + break; + case SYS_CONNECT: + if (copy_from_user(a, args, 3 * sizeof(long)) == 0) + r = sys_oabi_connect(a[0], (struct sockaddr __user *)a[1], a[2]); + break; + case SYS_SENDTO: + if (copy_from_user(a, args, 6 * sizeof(long)) == 0) + r = sys_oabi_sendto(a[0], (void __user *)a[1], a[2], a[3], + (struct sockaddr __user *)a[4], a[5]); + break; + case SYS_SENDMSG: + if (copy_from_user(a, args, 3 * sizeof(long)) == 0) + r = sys_oabi_sendmsg(a[0], (struct msghdr __user *)a[1], a[2]); + break; + default: + r = sys_socketcall(call, args); + } + + return r; +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index d7d932c0286..d6bd435a685 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -422,12 +422,14 @@ static int timer_dyn_tick_disable(void) void timer_dyn_reprogram(void) { struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + unsigned long next, seq; - if (dyn_tick) { - write_seqlock(&xtime_lock); - if (dyn_tick->state & DYN_TICK_ENABLED) + if (dyn_tick && (dyn_tick->state & DYN_TICK_ENABLED)) { + next = next_timer_interrupt(); + do { + seq = read_seqbegin(&xtime_lock); dyn_tick->reprogram(next_timer_interrupt() - jiffies); - write_sequnlock(&xtime_lock); + } while (read_seqretry(&xtime_lock, seq)); } } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 10235b01582..03924bcc612 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -19,6 +19,7 @@ #include <linux/personality.h> #include <linux/ptrace.h> #include <linux/kallsyms.h> +#include <linux/delay.h> #include <linux/init.h> #include <asm/atomic.h> @@ -231,6 +232,13 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) __die(str, err, thread, regs); bust_spinlocks(0); spin_unlock_irq(&die_lock); + + if (panic_on_oops) { + printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); + ssleep(5); + panic("Fatal exception"); + } + do_exit(SIGSEGV); } diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S index 72d594184b8..d89c6061579 100644 --- a/arch/arm/lib/muldi3.S +++ b/arch/arm/lib/muldi3.S @@ -29,8 +29,8 @@ ENTRY(__aeabi_lmul) mul xh, yl, xh mla xh, xl, yh, xh - mov ip, xl, asr #16 - mov yh, yl, asr #16 + mov ip, xl, lsr #16 + mov yh, yl, lsr #16 bic xl, xl, ip, lsl #16 bic yl, yl, yh, lsl #16 mla xh, yh, ip, xh diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 8df3e524565..57eedd5beaf 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -100,8 +100,10 @@ void __init at91_add_device_udc(struct at91_udc_data *data) at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); } - if (data->pullup_pin) + if (data->pullup_pin) { at91_set_gpio_output(data->pullup_pin, 0); + at91_set_multi_drive(data->pullup_pin, 1); + } udc_data = *data; platform_device_register(&at91rm9200_udc_device); diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 2fd2ef583e4..0e396feec46 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -159,6 +159,23 @@ int __init_or_module at91_set_deglitch(unsigned pin, int is_on) } EXPORT_SYMBOL(at91_set_deglitch); +/* + * enable/disable the multi-driver; This is only valid for output and + * allows the output pin to run as an open collector output. + */ +int __init_or_module at91_set_multi_drive(unsigned pin, int is_on) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); + return 0; +} +EXPORT_SYMBOL(at91_set_multi_drive); + /*--------------------------------------------------------------------------*/ @@ -257,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs gpio = &irq_desc[pin]; while (isr) { - if (isr & 1) - gpio->handle(pin, gpio, regs); + if (isr & 1) { + if (unlikely(gpio->disable_depth)) { + /* + * The core ARM interrupt handler lazily disables IRQs so + * another IRQ must be generated before it actually gets + * here to be disabled on the GPIO controller. + */ + gpio_irq_mask(pin); + } + else + gpio->handle(pin, gpio, regs); + } pin++; gpio++; isr >>= 1; diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0793dcf54f2..0e2b641268a 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -24,6 +24,8 @@ config ARCH_CEIVA config ARCH_CLEP7312 bool "CLEP7312" + help + Boards based on the Cirrus Logic 7212/7312 chips. config ARCH_EDB7211 bool "EDB7211" diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index dc31e3fd6c5..8ab1b040288 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <linux/interrupt.h> #include "generic.h" -#include <asm/serial.h> static struct resource cs89x0_resources[] = { [0] = { diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 31820170f30..a0724f2b24c 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -469,7 +469,9 @@ static void cp_clcd_enable(struct clcd_fb *fb) if (fb->fb.var.bits_per_pixel <= 8) val = CM_CTRL_LCDMUXSEL_VGA_8421BPP; else if (fb->fb.var.bits_per_pixel <= 16) - val = CM_CTRL_LCDMUXSEL_VGA_16BPP; + val = CM_CTRL_LCDMUXSEL_VGA_16BPP + | CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1 + | CM_CTRL_STATIC1 | CM_CTRL_STATIC2; else val = 0; /* no idea for this, don't trust the docs */ diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c index ea10bd8c972..1bc8534ef0c 100644 --- a/arch/arm/mach-integrator/platsmp.c +++ b/arch/arm/mach-integrator/platsmp.c @@ -140,6 +140,18 @@ static void __init poke_milo(void) mb(); } +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + cpu_set(i, cpu_possible_map); +} + void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); @@ -176,14 +188,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus) max_cpus = ncores; /* - * Initialise the possible/present maps. - * cpu_possible_map describes the set of CPUs which may be present - * cpu_present_map describes the set of CPUs populated + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. */ - for (i = 0; i < max_cpus; i++) { - cpu_set(i, cpu_possible_map); + for (i = 0; i < max_cpus; i++) cpu_set(i, cpu_present_map); - } /* * Do we need any more CPUs? If so, then let them know where diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c index e4f4c52d93d..0ebbcb20c6a 100644 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ b/arch/arm/mach-iop3xx/iop321-setup.c @@ -13,7 +13,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/config.h> -#include <linux/init.h> #include <linux/major.h> #include <linux/fs.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index 63585485123..2d6abe5be14 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -12,7 +12,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/config.h> -#include <linux/init.h> #include <linux/major.h> #include <linux/fs.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 9e5a13bb39d..52fac89e95b 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -106,6 +106,7 @@ static void __init enp2611_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } static inline int enp2611_pci_valid_device(struct pci_bus *bus, diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 7c782403042..09101271298 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -68,6 +68,7 @@ void __init ixdp2400_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys) diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 10f06606d46..150519fb38e 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -212,6 +212,7 @@ void __init ixdp2x01_pci_preinit(void) { ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000); ixp2000_pci_preinit(); + pcibios_setup("firmware"); } #define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) @@ -299,7 +300,9 @@ struct hw_pci ixdp2x01_pci __initdata = { int __init ixdp2x01_pci_init(void) { - pci_common_init(&ixdp2x01_pci); + if (machine_is_ixdp2401() || machine_is_ixdp2801()) + pci_common_init(&ixdp2x01_pci); + return 0; } diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index daadc78e271..5bf50a2a737 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -8,11 +8,9 @@ menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" -# This entry is placed on top because otherwise it would have -# been shown as a submenu. config MACH_NSLU2 bool - prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) + prompt "Linksys NSLU2" help Say 'Y' here if you want your kernel to support Linksys's NSLU2 NAS device. For more information on this platform, diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 4bdc9d4526c..fbadf3021b9 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -111,24 +111,30 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) if (line < 0) return -EINVAL; - if (type & IRQT_BOTHEDGE) { + switch (type){ + case IRQT_BOTHEDGE: int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; irq_type = IXP4XX_IRQ_EDGE; - } else if (type & IRQT_RISING) { + break; + case IRQT_RISING: int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; irq_type = IXP4XX_IRQ_EDGE; - } else if (type & IRQT_FALLING) { + break; + case IRQT_FALLING: int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; irq_type = IXP4XX_IRQ_EDGE; - } else if (type & IRQT_HIGH) { + break; + case IRQT_HIGH: int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; irq_type = IXP4XX_IRQ_LEVEL; - } else if (type & IRQT_LOW) { + break; + case IRQT_LOW: int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP4XX_IRQ_LEVEL; - } else + break; + default: return -EINVAL; - + } ixp4xx_config_irq(irq, irq_type); if (line >= 8) { /* pins 8-15 */ diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c index 2bec69bfa71..99d333d7ebd 100644 --- a/arch/arm/mach-ixp4xx/nas100d-power.c +++ b/arch/arm/mach-ixp4xx/nas100d-power.c @@ -56,6 +56,9 @@ static int __init nas100d_power_init(void) static void __exit nas100d_power_exit(void) { + if (!(machine_is_nas100d())) + return; + free_irq(NAS100D_RB_IRQ, NULL); } diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 856d56f3b2a..a3b4c6ac570 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -113,6 +113,9 @@ static void __init nas100d_init(void) { ixp4xx_sys_init(); + /* gpio 14 and 15 are _not_ clocks */ + *IXP4XX_GPIO_GPCLKR = 0; + nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c index b0ad9e901f6..d80c362bc53 100644 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -77,6 +77,9 @@ static int __init nslu2_power_init(void) static void __exit nslu2_power_exit(void) { + if (!(machine_is_nslu2())) + return; + free_irq(NSLU2_RB_IRQ, NULL); free_irq(NSLU2_PB_IRQ, NULL); } diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index da9340a5343..55411f21d83 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -27,8 +27,6 @@ static struct flash_platform_data nslu2_flash_data = { }; static struct resource nslu2_flash_resource = { - .start = NSLU2_FLASH_BASE, - .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, .flags = IORESOURCE_MEM, }; @@ -52,6 +50,12 @@ static struct platform_device nslu2_i2c_controller = { .num_resources = 0, }; +static struct platform_device nslu2_beeper = { + .name = "ixp4xx-beeper", + .id = NSLU2_GPIO_BUZZ, + .num_resources = 0, +}; + static struct resource nslu2_uart_resources[] = { { .start = IXP4XX_UART1_BASE_PHYS, @@ -99,6 +103,7 @@ static struct platform_device *nslu2_devices[] __initdata = { &nslu2_i2c_controller, &nslu2_flash, &nslu2_uart, + &nslu2_beeper, }; static void nslu2_power_off(void) @@ -116,6 +121,10 @@ static void __init nslu2_init(void) { ixp4xx_sys_init(); + nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + nslu2_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + pm_power_off = nslu2_power_off; platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index bdc20b51b07..a177e78b2b8 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -30,6 +30,7 @@ static void __init omap_generic_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); } @@ -104,7 +105,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9533c36a92d..89f0cc74a51 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -128,6 +128,7 @@ static void __init h2_init_smc91x(void) static void __init h2_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); h2_init_smc91x(); @@ -194,7 +195,7 @@ static void __init h2_init(void) static void __init h2_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index d665efc1c34..d9f38626599 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -203,6 +203,7 @@ static void __init h3_init_smc91x(void) void h3_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); h3_init_smc91x(); @@ -210,7 +211,7 @@ void h3_init_irq(void) static void __init h3_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 652f37c7f90..a04e4332915 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -181,6 +181,7 @@ static void __init innovator_init_smc91x(void) void innovator_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); #ifdef CONFIG_ARCH_OMAP15XX @@ -285,7 +286,7 @@ static void __init innovator_init(void) static void __init innovator_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index 58f783930d4..60d5f8a3339 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -65,6 +65,7 @@ static struct omap_board_config_kernel netstar_config[] = { static void __init netstar_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); } @@ -108,7 +109,7 @@ static void __init netstar_init(void) static void __init netstar_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e5d126e8f27..543fa136106 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -169,6 +169,7 @@ static void __init osk_init_cf(void) static void __init osk_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); osk_init_smc91x(); @@ -269,7 +270,7 @@ static void __init osk_init(void) static void __init osk_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 67fada20762..e488f723677 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -34,6 +34,7 @@ static void __init omap_generic_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); } @@ -72,7 +73,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 88708a0c52a..3913a3cc0ce 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -144,6 +144,7 @@ static void __init perseus2_init_smc91x(void) void omap_perseus2_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); perseus2_init_smc91x(); @@ -160,7 +161,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = { static void __init omap_perseus2_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); iotable_init(omap_perseus2_io_desc, ARRAY_SIZE(omap_perseus2_io_desc)); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 959b4b847c8..bfd5fdd1a87 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -162,6 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = { static void __init voiceblue_init_irq(void) { + omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); } @@ -206,7 +207,7 @@ static void __init voiceblue_init(void) static void __init voiceblue_map_io(void) { - omap_map_common_io(); + omap1_map_common_io(); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index a7a19f75b9e..82d556be79c 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <asm/tlb.h> #include <asm/mach/map.h> #include <asm/io.h> #include <asm/arch/mux.h> @@ -83,15 +84,24 @@ static struct map_desc omap16xx_io_desc[] __initdata = { }; #endif -static int initialized = 0; - -static void __init _omap_map_io(void) +/* + * Maps common IO regions for omap1. This should only get called from + * board specific init. + */ +void __init omap1_map_common_io(void) { - initialized = 1; - - /* We have to initialize the IO space mapping before we can run - * cpu_is_omapxxx() macros. */ iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); + + /* Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* We want to check CPU revision early for cpu_is_omapxxxx() macros. + * IO space mapping must be initialized before we can do that. + */ omap_check_revision(); #ifdef CONFIG_ARCH_OMAP730 @@ -111,7 +121,14 @@ static void __init _omap_map_io(void) #endif omap_sram_init(); +} +/* + * Common low-level hardware init for omap1. This should only get called from + * board specific init. + */ +void __init omap1_init_common_hw() +{ /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -121,16 +138,7 @@ static void __init _omap_map_io(void) /* Must init clocks early to assure that timer interrupt works */ omap1_clk_init(); -} -/* - * This should only get called from board specific init - */ -void __init omap_map_common_io(void) -{ - if (!initialized) { - _omap_map_io(); - omap1_mux_init(); - } + omap1_mux_init(); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index b937123e5c6..eaecbf422d8 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,6 +33,7 @@ static void __init omap_generic_init_irq(void) { + omap2_init_common_hw(); omap_init_irq(); } @@ -64,7 +65,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io(); + omap2_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index c3c35d40378..a300d634d8a 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -136,6 +136,7 @@ static inline void __init h4_init_smc91x(void) static void __init omap_h4_init_irq(void) { + omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); h4_init_smc91x(); @@ -181,7 +182,7 @@ static void __init omap_h4_init(void) static void __init omap_h4_map_io(void) { - omap_map_common_io(); + omap2_map_common_io(); } MACHINE_START(OMAP_H4, "OMAP2420 H4 board") diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index b41b1efaa2c..3baa70819f2 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -44,7 +44,7 @@ unsigned int get_clk_frequency_khz( int info) /* Read clkcfg register: it has turbo, b, half-turbo (and f) */ asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) ); - t = clkcfg & (1 << 1); + t = clkcfg & (1 << 0); ht = clkcfg & (1 << 2); b = clkcfg & (1 << 3); diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 4a222f59f2c..4303d988c4b 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -182,7 +182,7 @@ static const struct icst307_params realview_oscvco_params = { static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) { void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET; + void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; u32 val; val = readl(sys_osc) & ~0x7ffff; diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a8fbd76d8be..b8484e15dac 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -143,6 +143,18 @@ static void __init poke_milo(void) mb(); } +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + cpu_set(i, cpu_possible_map); +} + void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); @@ -179,14 +191,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus) local_timer_setup(cpu); /* - * Initialise the possible/present maps. - * cpu_possible_map describes the set of CPUs which may be present - * cpu_present_map describes the set of CPUs populated + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. */ - for (i = 0; i < max_cpus; i++) { - cpu_set(i, cpu_possible_map); + for (i = 0; i < max_cpus; i++) cpu_set(i, cpu_present_map); - } /* * Do we need any more CPUs? If so, then let them know where diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index b4f1e051c76..1217bf00309 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -10,9 +10,13 @@ obj-m := obj-n := obj- := +# S3C2400 support files +obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o + # S3C2410 support files obj-$(CONFIG_CPU_S3C2410) += s3c2410.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o obj-$(CONFIG_S3C2410_DMA) += dma.o # Power Management support @@ -25,6 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o +obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o # bast extras diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index af2f3d52b61..08489efdaf0 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -40,7 +40,6 @@ #include <linux/mutex.h> #include <asm/hardware.h> -#include <asm/atomic.h> #include <asm/irq.h> #include <asm/io.h> @@ -59,22 +58,18 @@ static DEFINE_MUTEX(clocks_mutex); void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable) { unsigned long clkcon; - unsigned long flags; - - local_irq_save(flags); clkcon = __raw_readl(S3C2410_CLKCON); - clkcon &= ~clocks; if (enable) clkcon |= clocks; + else + clkcon &= ~clocks; /* ensure none of the special function bits set */ clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); __raw_writel(clkcon, S3C2410_CLKCON); - - local_irq_restore(flags); } /* enable and disable calls for use with the clk struct */ @@ -138,16 +133,32 @@ void clk_put(struct clk *clk) int clk_enable(struct clk *clk) { - if (IS_ERR(clk)) + if (IS_ERR(clk) || clk == NULL) return -EINVAL; - return (clk->enable)(clk, 1); + clk_enable(clk->parent); + + mutex_lock(&clocks_mutex); + + if ((clk->usage++) == 0) + (clk->enable)(clk, 1); + + mutex_unlock(&clocks_mutex); + return 0; } void clk_disable(struct clk *clk) { - if (!IS_ERR(clk)) + if (IS_ERR(clk) || clk == NULL) + return; + + mutex_lock(&clocks_mutex); + + if ((--clk->usage) == 0) (clk->enable)(clk, 0); + + mutex_unlock(&clocks_mutex); + clk_disable(clk->parent); } @@ -361,6 +372,14 @@ int s3c24xx_register_clock(struct clk *clk) if (clk->enable == NULL) clk->enable = clk_null_enable; + /* if this is a standard clock, set the usage state */ + + if (clk->ctrlbit) { + unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + + clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0; + } + /* add to the list of available clocks */ mutex_lock(&clocks_mutex); @@ -402,6 +421,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, * the LCD clock if it is not needed. */ + mutex_lock(&clocks_mutex); + s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0); s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0); s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0); @@ -409,6 +430,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0); s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0); + mutex_unlock(&clocks_mutex); + /* assume uart clocks are correctly setup */ /* register our clocks */ diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index 177d5c8decf..eb5c95d1e7f 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -16,6 +16,7 @@ struct clk { struct clk *parent; const char *name; int id; + int usage; unsigned long rate; unsigned long ctrlbit; int (*enable)(struct clk *, int enable); diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 687fe371369..00a379334b6 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -40,6 +40,7 @@ #include "cpu.h" #include "clock.h" +#include "s3c2400.h" #include "s3c2410.h" #include "s3c2440.h" @@ -55,6 +56,7 @@ struct cpu_table { /* table of supported CPUs */ +static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2410a[] = "S3C2410A"; @@ -96,7 +98,16 @@ static struct cpu_table cpu_ids[] __initdata = { .init_uarts = s3c2440_init_uarts, .init = s3c2440_init, .name = name_s3c2440a - } + }, + { + .idcode = 0x0, /* S3C2400 doesn't have an idcode */ + .idmask = 0xffffffff, + .map_io = s3c2400_map_io, + .init_clocks = s3c2400_init_clocks, + .init_uarts = s3c2400_init_uarts, + .init = s3c2400_init, + .name = name_s3c2400 + }, }; /* minimal IO mapping */ @@ -148,12 +159,15 @@ static struct cpu_table *cpu; void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode; + unsigned long idcode = 0x0; /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); +#ifndef CONFIG_CPU_S3C2400 idcode = __raw_readl(S3C2410_GSTATUS1); +#endif + cpu = s3c_lookup_cpu(idcode); if (cpu == NULL) { diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h index 9cbe5eef492..fc1067783f6 100644 --- a/arch/arm/mach-s3c2410/cpu.h +++ b/arch/arm/mach-s3c2410/cpu.h @@ -17,11 +17,12 @@ * 14-Jan-2005 BJD Added s3c24xx_init_clocks() call * 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT * 14-Mar-2005 BJD Updated for __iomem + * 15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro */ /* todo - fix when rmk changes iodescs to use `void __iomem *` */ -#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } +#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ #define MHZ (1000*1000) diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index f58406e6ef5..0a47d38789a 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. * * Modifications: + * 15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices * 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} * 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv * 29-Aug-2004 BJD Added timers 0 through 3 @@ -46,8 +47,8 @@ struct platform_device *s3c24xx_uart_devs[3]; static struct resource s3c_usb_resource[] = { [0] = { - .start = S3C2410_PA_USBHOST, - .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1, + .start = S3C24XX_PA_USBHOST, + .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -76,8 +77,8 @@ EXPORT_SYMBOL(s3c_device_usb); static struct resource s3c_lcd_resource[] = { [0] = { - .start = S3C2410_PA_LCD, - .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1, + .start = S3C24XX_PA_LCD, + .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -139,8 +140,8 @@ EXPORT_SYMBOL(s3c_device_nand); static struct resource s3c_usbgadget_resource[] = { [0] = { - .start = S3C2410_PA_USBDEV, - .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1, + .start = S3C24XX_PA_USBDEV, + .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -164,8 +165,8 @@ EXPORT_SYMBOL(s3c_device_usbgadget); static struct resource s3c_wdt_resource[] = { [0] = { - .start = S3C2410_PA_WATCHDOG, - .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1, + .start = S3C24XX_PA_WATCHDOG, + .end = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -189,8 +190,8 @@ EXPORT_SYMBOL(s3c_device_wdt); static struct resource s3c_i2c_resource[] = { [0] = { - .start = S3C2410_PA_IIC, - .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1, + .start = S3C24XX_PA_IIC, + .end = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -214,8 +215,8 @@ EXPORT_SYMBOL(s3c_device_i2c); static struct resource s3c_iis_resource[] = { [0] = { - .start = S3C2410_PA_IIS, - .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1, + .start = S3C24XX_PA_IIS, + .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1, .flags = IORESOURCE_MEM, } }; @@ -239,8 +240,8 @@ EXPORT_SYMBOL(s3c_device_iis); static struct resource s3c_rtc_resource[] = { [0] = { - .start = S3C2410_PA_RTC, - .end = S3C2410_PA_RTC + 0xff, + .start = S3C24XX_PA_RTC, + .end = S3C24XX_PA_RTC + 0xff, .flags = IORESOURCE_MEM, }, [1] = { @@ -268,12 +269,17 @@ EXPORT_SYMBOL(s3c_device_rtc); static struct resource s3c_adc_resource[] = { [0] = { - .start = S3C2410_PA_ADC, - .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1, + .start = S3C24XX_PA_ADC, + .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_ADC, .end = IRQ_ADC, .flags = IORESOURCE_IRQ, } @@ -316,8 +322,8 @@ EXPORT_SYMBOL(s3c_device_sdi); static struct resource s3c_spi0_resource[] = { [0] = { - .start = S3C2410_PA_SPI, - .end = S3C2410_PA_SPI + 0x1f, + .start = S3C24XX_PA_SPI, + .end = S3C24XX_PA_SPI + 0x1f, .flags = IORESOURCE_MEM, }, [1] = { @@ -341,8 +347,8 @@ EXPORT_SYMBOL(s3c_device_spi0); static struct resource s3c_spi1_resource[] = { [0] = { - .start = S3C2410_PA_SPI + 0x20, - .end = S3C2410_PA_SPI + 0x20 + 0x1f, + .start = S3C24XX_PA_SPI + 0x20, + .end = S3C24XX_PA_SPI + 0x20 + 0x1f, .flags = IORESOURCE_MEM, }, [1] = { @@ -366,8 +372,8 @@ EXPORT_SYMBOL(s3c_device_spi1); static struct resource s3c_timer0_resource[] = { [0] = { - .start = S3C2410_PA_TIMER + 0x0C, - .end = S3C2410_PA_TIMER + 0x0C + 0xB, + .start = S3C24XX_PA_TIMER + 0x0C, + .end = S3C24XX_PA_TIMER + 0x0C + 0xB, .flags = IORESOURCE_MEM, }, [1] = { @@ -391,8 +397,8 @@ EXPORT_SYMBOL(s3c_device_timer0); static struct resource s3c_timer1_resource[] = { [0] = { - .start = S3C2410_PA_TIMER + 0x18, - .end = S3C2410_PA_TIMER + 0x23, + .start = S3C24XX_PA_TIMER + 0x18, + .end = S3C24XX_PA_TIMER + 0x23, .flags = IORESOURCE_MEM, }, [1] = { @@ -416,8 +422,8 @@ EXPORT_SYMBOL(s3c_device_timer1); static struct resource s3c_timer2_resource[] = { [0] = { - .start = S3C2410_PA_TIMER + 0x24, - .end = S3C2410_PA_TIMER + 0x2F, + .start = S3C24XX_PA_TIMER + 0x24, + .end = S3C24XX_PA_TIMER + 0x2F, .flags = IORESOURCE_MEM, }, [1] = { @@ -441,8 +447,8 @@ EXPORT_SYMBOL(s3c_device_timer2); static struct resource s3c_timer3_resource[] = { [0] = { - .start = S3C2410_PA_TIMER + 0x30, - .end = S3C2410_PA_TIMER + 0x3B, + .start = S3C24XX_PA_TIMER + 0x30, + .end = S3C24XX_PA_TIMER + 0x3B, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 65feaf20d23..4dbd8e758ea 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -1152,7 +1152,7 @@ static int __init s3c2410_init_dma(void) printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n"); - dma_base = ioremap(S3C2410_PA_DMA, 0x200); + dma_base = ioremap(S3C24XX_PA_DMA, 0x200); if (dma_base == NULL) { printk(KERN_ERR "dma failed to remap register block\n"); return -ENOMEM; diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index 23ea3d5fa09..cd39e868458 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -31,6 +31,7 @@ * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code * 13-Mar-2005 BJD Updates for __iomem * 26-Oct-2005 BJD Added generic configuration types + * 15-Jan-2006 LCVR Added support for the S3C2400 */ @@ -48,7 +49,7 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long mask; unsigned long con; unsigned long flags; @@ -95,7 +96,7 @@ EXPORT_SYMBOL(s3c2410_gpio_cfgpin); unsigned int s3c2410_gpio_getcfg(unsigned int pin) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long mask; if (pin < S3C2410_GPIO_BANKB) { @@ -111,7 +112,7 @@ EXPORT_SYMBOL(s3c2410_gpio_getcfg); void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long offs = S3C2410_GPIO_OFFSET(pin); unsigned long flags; unsigned long up; @@ -133,7 +134,7 @@ EXPORT_SYMBOL(s3c2410_gpio_pullup); void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long offs = S3C2410_GPIO_OFFSET(pin); unsigned long flags; unsigned long dat; @@ -152,7 +153,7 @@ EXPORT_SYMBOL(s3c2410_gpio_setpin); unsigned int s3c2410_gpio_getpin(unsigned int pin) { - void __iomem *base = S3C2410_GPIO_BASE(pin); + void __iomem *base = S3C24XX_GPIO_BASE(pin); unsigned long offs = S3C2410_GPIO_OFFSET(pin); return __raw_readl(base + 0x04) & (1<< offs); @@ -166,70 +167,13 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) unsigned long misccr; local_irq_save(flags); - misccr = __raw_readl(S3C2410_MISCCR); + misccr = __raw_readl(S3C24XX_MISCCR); misccr &= ~clear; misccr ^= change; - __raw_writel(misccr, S3C2410_MISCCR); + __raw_writel(misccr, S3C24XX_MISCCR); local_irq_restore(flags); return misccr; } EXPORT_SYMBOL(s3c2410_modify_misccr); - -int s3c2410_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23) - return -1; /* not valid interrupts */ - - if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) - return -1; /* not valid pin */ - - if (pin < S3C2410_GPF4) - return (pin - S3C2410_GPF0) + IRQ_EINT0; - - if (pin < S3C2410_GPG0) - return (pin - S3C2410_GPF4) + IRQ_EINT4; - - return (pin - S3C2410_GPG0) + IRQ_EINT8; -} - -EXPORT_SYMBOL(s3c2410_gpio_getirq); - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C2410_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) - return -1; - - config &= 0xff; - - pin -= S3C2410_GPG8_EINT16; - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C2410_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C2410_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 1c316f14ed9..646a3a5d33a 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -46,10 +46,11 @@ #include <asm/irq.h> #include <asm/mach-types.h> -//#include <asm/debug-ll.h> + #include <asm/arch/regs-serial.h> #include <asm/arch/regs-lcd.h> +#include <asm/arch/h1940-latch.h> #include <asm/arch/fb.h> #include <linux/serial_core.h> @@ -59,7 +60,12 @@ #include "cpu.h" static struct map_desc h1940_iodesc[] __initdata = { - /* nothing here yet */ + [0] = { + .virtual = (unsigned long)H1940_LATCH, + .pfn = __phys_to_pfn(H1940_PA_LATCH), + .length = SZ_16K, + .type = MT_DEVICE + }, }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK @@ -92,6 +98,25 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = { } }; +/* Board control latch control */ + +static unsigned int latch_state = H1940_LATCH_DEFAULT; + +void h1940_latch_control(unsigned int clear, unsigned int set) +{ + unsigned long flags; + + local_irq_save(flags); + + latch_state &= ~clear; + latch_state |= set; + + __raw_writel(latch_state, H1940_LATCH); + + local_irq_restore(flags); +} + +EXPORT_SYMBOL_GPL(h1940_latch_control); /** diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2410/s3c2400-gpio.c new file mode 100644 index 00000000000..5127f39fa9b --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2400-gpio.c @@ -0,0 +1,45 @@ +/* linux/arch/arm/mach-s3c2410/gpio.c + * + * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org> + * + * S3C2400 GPIO support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Changelog + * 15-Jan-2006 LCVR Splitted from gpio.c, adding support for the S3C2400 + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/arch/regs-gpio.h> + +int s3c2400_gpio_getirq(unsigned int pin) +{ + if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7) + return -1; /* not valid interrupts */ + + return (pin - S3C2410_GPE0) + IRQ_EINT0; +} + +EXPORT_SYMBOL(s3c2400_gpio_getirq); diff --git a/arch/arm/mach-s3c2410/s3c2400.h b/arch/arm/mach-s3c2410/s3c2400.h new file mode 100644 index 00000000000..8b2394e1ed4 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2400.h @@ -0,0 +1,31 @@ +/* arch/arm/mach-s3c2410/s3c2400.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for S3C2400 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 09-Fev-2006 LCVR First version, based on s3c2410.h +*/ + +#ifdef CONFIG_CPU_S3C2400 + +extern int s3c2400_init(void); + +extern void s3c2400_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2400_init_clocks(int xtal); + +#else +#define s3c2400_init_clocks NULL +#define s3c2400_init_uarts NULL +#define s3c2400_map_io NULL +#define s3c2400_init NULL +#endif diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c new file mode 100644 index 00000000000..d5e1caea1d2 --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2410-gpio.c @@ -0,0 +1,93 @@ +/* linux/arch/arm/mach-s3c2410/gpio.c + * + * Copyright (c) 2004-2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 GPIO support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Changelog + * 15-Jan-2006 LCVR Splitted from gpio.c + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/arch/regs-gpio.h> + +int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config) +{ + void __iomem *reg = S3C2410_EINFLT0; + unsigned long flags; + unsigned long val; + + if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) + return -1; + + config &= 0xff; + + pin -= S3C2410_GPG8_EINT16; + reg += pin & ~3; + + local_irq_save(flags); + + /* update filter width and clock source */ + + val = __raw_readl(reg); + val &= ~(0xff << ((pin & 3) * 8)); + val |= config << ((pin & 3) * 8); + __raw_writel(val, reg); + + /* update filter enable */ + + val = __raw_readl(S3C2410_EXTINT2); + val &= ~(1 << ((pin * 4) + 3)); + val |= on << ((pin * 4) + 3); + __raw_writel(val, S3C2410_EXTINT2); + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(s3c2410_gpio_irqfilter); + +int s3c2410_gpio_getirq(unsigned int pin) +{ + if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23) + return -1; /* not valid interrupts */ + + if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) + return -1; /* not valid pin */ + + if (pin < S3C2410_GPF4) + return (pin - S3C2410_GPF0) + IRQ_EINT0; + + if (pin < S3C2410_GPG0) + return (pin - S3C2410_GPF4) + IRQ_EINT4; + + return (pin - S3C2410_GPG0) + IRQ_EINT8; +} + +EXPORT_SYMBOL(s3c2410_gpio_getirq); diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index 61768dac7fe..832fb86a03b 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -72,7 +72,7 @@ ENTRY(s3c2410_cpu_suspend) @@ prepare cpu to sleep ldr r4, =S3C2410_REFRESH - ldr r5, =S3C2410_MISCCR + ldr r5, =S3C24XX_MISCCR ldr r6, =S3C2410_CLKCON ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) @@ -133,12 +133,12 @@ ENTRY(s3c2410_cpu_resume) @@ load UART to allow us to print the two characters for @@ resume debug - mov r2, #S3C2410_PA_UART & 0xff000000 - orr r2, r2, #S3C2410_PA_UART & 0xff000 + mov r2, #S3C24XX_PA_UART & 0xff000000 + orr r2, r2, #S3C24XX_PA_UART & 0xff000 #if 0 /* SMDK2440 LED set */ - mov r14, #S3C2410_PA_GPIO + mov r14, #S3C24XX_PA_GPIO ldr r12, [ r14, #0x54 ] bic r12, r12, #3<<4 orr r12, r12, #1<<7 diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index b80d57d5169..722fbabc9cf 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -240,6 +240,14 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) int i; int myslot = -1; unsigned long val; + void __iomem *local_pci_cfg_base; + + val = __raw_readl(SYS_PCICTL); + if (!(val & 1)) { + printk("Not plugged into PCI backplane!\n"); + ret = -EIO; + goto out; + } if (nr == 0) { sys->mem_offset = 0; @@ -253,48 +261,45 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) goto out; } - __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0); - __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1); - __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2); - - __raw_writel(1, SYS_PCICTL); - - val = __raw_readl(SYS_PCICTL); - if (!(val & 1)) { - printk("Not plugged into PCI backplane!\n"); - ret = -EIO; - goto out; - } - /* * We need to discover the PCI core first to configure itself * before the main PCI probing is performed */ - for (i=0; i<32; i++) { + for (i=0; i<32; i++) if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { myslot = i; - - __raw_writel(myslot, PCI_SELFID); - val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); - val |= (1<<2); - __raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); break; } - } if (myslot == -1) { printk("Cannot find PCI core!\n"); ret = -EIO; - } else { - printk("PCI core found (slot %d)\n",myslot); - /* Do not to map Versatile FPGA PCI device - into memory space as we are short of - mappable memory */ - pci_slot_ignore |= (1 << myslot); - ret = 1; + goto out; } + printk("PCI core found (slot %d)\n",myslot); + + __raw_writel(myslot, PCI_SELFID); + local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11); + + val = __raw_readl(local_pci_cfg_base + CSR_OFFSET); + val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; + __raw_writel(val, local_pci_cfg_base + CSR_OFFSET); + + /* + * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM + */ + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0); + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1); + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2); + + /* + * Do not to map Versatile FPGA PCI device into memory space + */ + pci_slot_ignore |= (1 << myslot); + ret = 1; + out: return ret; } @@ -305,18 +310,18 @@ struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); } -/* - * V3_LB_BASE? - local bus address - * V3_LB_MAP? - pci bus address - */ void __init pci_versatile_preinit(void) { -} + __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0); + __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1); + __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2); -void __init pci_versatile_postinit(void) -{ -} + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0); + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1); + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2); + __raw_writel(1, SYS_PCICTL); +} /* * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. @@ -326,16 +331,15 @@ static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) int irq; int devslot = PCI_SLOT(dev->devfn); - /* slot, pin, irq - 24 1 27 - 25 1 28 untested - 26 1 29 - 27 1 30 untested - */ - - irq = 27 + ((slot + pin + 2) % 3); /* Fudged */ + /* slot, pin, irq + * 24 1 27 + * 25 1 28 + * 26 1 29 + * 27 1 30 + */ + irq = 27 + ((slot + pin - 1) & 3); - printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); + printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); return irq; } @@ -347,7 +351,6 @@ static struct hw_pci versatile_pci __initdata = { .setup = pci_versatile_setup, .scan = pci_versatile_scan_bus, .preinit = pci_versatile_preinit, - .postinit = pci_versatile_postinit, }; static int __init versatile_pci_init(void) diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index dbd34603312..8a7f65ba14b 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -20,7 +20,7 @@ */ .align 5 ENTRY(v6_early_abort) -#ifdef CONFIG_CPU_MPCORE +#ifdef CONFIG_CPU_32v6K clrex #else strex r0, r1, [sp] @ Clear the exclusive monitor diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 72966d90e95..2c6c2a7c05a 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -92,25 +92,20 @@ ENTRY(v6_coherent_kern_range) * - the Icache does not read data from the write buffer */ ENTRY(v6_coherent_user_range) - bic r0, r0, #CACHE_LINE_SIZE - 1 -1: + #ifdef HARVARD_CACHE - mcr p15, 0, r0, c7, c10, 1 @ clean D line - mcr p15, 0, r0, c7, c5, 1 @ invalidate I line -#endif - mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #BTB_FLUSH_SIZE - mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #BTB_FLUSH_SIZE - mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #BTB_FLUSH_SIZE - mcr p15, 0, r0, c7, c5, 7 @ invalidate BTB entry - add r0, r0, #BTB_FLUSH_SIZE + bic r0, r0, #CACHE_LINE_SIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D line + add r0, r0, #CACHE_LINE_SIZE cmp r0, r1 blo 1b -#ifdef HARVARD_CACHE +#endif mov r0, #0 +#ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif mov pc, lr diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 330695b6b19..b103e56806b 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -24,14 +24,16 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) { unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT); + const int zero = 0; set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL)); flush_tlb_kernel_page(to); asm( "mcrr p15, 0, %1, %0, c14\n" - " mcrr p15, 0, %1, %0, c5\n" + " mcr p15, 0, %2, c7, c10, 4\n" + " mcr p15, 0, %2, c7, c5, 0\n" : - : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES) + : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); } diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index de3ce1eec2e..da9b3597411 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -142,7 +142,7 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, return NULL; addr = (unsigned long)area->addr; if (remap_area_pages(addr, pfn, size, flags)) { - vfree(addr); + vfree((void *)addr); return NULL; } return (void __iomem *) (offset + (char *)addr); diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index d0245a31d4d..ef8d30a185a 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -343,6 +343,12 @@ static struct mem_types mem_types[] __initdata = { PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE | PMD_SECT_TEX(1), .domain = DOMAIN_IO, + }, + [MT_NONSHARED_DEVICE] = { + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_NONSHARED_DEV | + PMD_SECT_AP_WRITE, + .domain = DOMAIN_IO, } }; diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 861b3594728..2d3823ec315 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -241,7 +241,15 @@ ENTRY(xscale_flush_user_cache_range) * it also trashes the mini I-cache used by JTAG debuggers. */ ENTRY(xscale_coherent_kern_range) - /* FALLTHROUGH */ + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr /* * coherent_user_range(start, end) @@ -252,18 +260,16 @@ ENTRY(xscale_coherent_kern_range) * * - start - virtual start address * - end - virtual end address - * - * Note: single I-cache line invalidation isn't used here since - * it also trashes the mini I-cache used by JTAG debuggers. */ ENTRY(xscale_coherent_user_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c5, 1 @ Invalidate I cache entry add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer mov pc, lr diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 6f76b89ef46..fd6adde3909 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -80,6 +80,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b + mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier mov pc, lr .section ".text.init", #alloc, #execinstr diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 1415930ceee..6f8bc1f0e6a 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -137,8 +137,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) if (spec) { init_MUTEX(&op_arm_sem); - if (spec->init() < 0) - return -ENODEV; + ret = spec->init(); + if (ret < 0) + return ret; op_arm_model = spec; init_driverfs(); diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index 1a24e2c1071..093efd786f2 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -38,7 +38,6 @@ #include <linux/pm.h> #include <linux/sched.h> #include <linux/proc_fs.h> -#include <linux/pm.h> #include <linux/interrupt.h> #include <asm/io.h> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 792f6637583..ee82763b02b 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <asm/mach/map.h> +#include <asm/tlb.h> #include <asm/io.h> #include <asm/cacheflush.h> @@ -96,6 +97,14 @@ void __init omap_map_sram(void) omap_sram_io_desc[0].length); /* + * Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but since we're called from map_io(), we + * must do it here. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index d0f9bb5e902..8ab5300dcb9 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Jan 9 12:56:42 2006 +# Last update: Mon Feb 20 10:18:02 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -904,7 +904,7 @@ wg302v2 MACH_WG302V2 WG302V2 890 eb42x MACH_EB42X EB42X 891 iq331es MACH_IQ331ES IQ331ES 892 cosydsp MACH_COSYDSP COSYDSP 893 -uplat7d MACH_UPLAT7D UPLAT7D 894 +uplat7d_proto MACH_UPLAT7D UPLAT7D 894 ptdavinci MACH_PTDAVINCI PTDAVINCI 895 mbus MACH_MBUS MBUS 896 nadia2vb MACH_NADIA2VB NADIA2VB 897 @@ -938,3 +938,34 @@ auckland MACH_AUCKLAND AUCKLAND 924 ak3220m MACH_AK3320M AK3320M 925 duramax MACH_DURAMAX DURAMAX 926 n35 MACH_N35 N35 927 +pronghorn MACH_PRONGHORN PRONGHORN 928 +fundy MACH_FUNDY FUNDY 929 +logicpd_pxa270 MACH_LOGICPD_PXA270 LOGICPD_PXA270 930 +cpu777 MACH_CPU777 CPU777 931 +simicon9201 MACH_SIMICON9201 SIMICON9201 932 +leap2_hpm MACH_LEAP2_HPM LEAP2_HPM 933 +cm922txa10 MACH_CM922TXA10 CM922TXA10 934 +sandgate MACH_PXA PXA 935 +sandgate2 MACH_SANDGATE2 SANDGATE2 936 +sandgate2g MACH_SANDGATE2G SANDGATE2G 937 +sandgate2p MACH_SANDGATE2P SANDGATE2P 938 +fred_jack MACH_FRED_JACK FRED_JACK 939 +ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940 +nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941 +netdcu8 MACH_NETDCU8 NETDCU8 942 +ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943 +ng_fvx538 MACH_NG_FVX538 NG_FVX538 944 +ng_fvs338 MACH_NG_FVS338 NG_FVS338 945 +pnx4103 MACH_PNX4103 PNX4103 946 +hesdb MACH_HESDB HESDB 947 +xsilo MACH_XSILO XSILO 948 +espresso MACH_ESPRESSO ESPRESSO 949 +emlc MACH_EMLC EMLC 950 +sisteron MACH_SISTERON SISTERON 951 +rx1950 MACH_RX1950 RX1950 952 +tsc_venus MACH_TSC_VENUS TSC_VENUS 953 +ds101j MACH_DS101J DS101J 954 +mxc300_30ads MACH_MXC30030ADS MXC30030ADS 955 +fujitsu_wimaxsoc MACH_FUJITSU_WIMAXSOC FUJITSU_WIMAXSOC 956 +dualpcmodem MACH_DUALPCMODEM DUALPCMODEM 957 +gesbc9312 MACH_GESBC9312 GESBC9312 958 |