aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/common/sa1111.c2
-rw-r--r--arch/arm/configs/ezx_defconfig1614
-rw-r--r--arch/arm/mach-pxa/Kconfig219
-rw-r--r--arch/arm/mach-pxa/Makefile15
-rw-r--r--arch/arm/mach-pxa/clock.c30
-rw-r--r--arch/arm/mach-pxa/clock.h33
-rw-r--r--arch/arm/mach-pxa/cm-x270-pci.c27
-rw-r--r--arch/arm/mach-pxa/cm-x270-pci.h14
-rw-r--r--arch/arm/mach-pxa/cm-x270.c403
-rw-r--r--arch/arm/mach-pxa/corgi.c1
-rw-r--r--arch/arm/mach-pxa/devices.c61
-rw-r--r--arch/arm/mach-pxa/devices.h2
-rw-r--r--arch/arm/mach-pxa/e400_lcd.c56
-rw-r--r--arch/arm/mach-pxa/e740_lcd.c123
-rw-r--r--arch/arm/mach-pxa/e750_lcd.c109
-rw-r--r--arch/arm/mach-pxa/e800_lcd.c159
-rw-r--r--arch/arm/mach-pxa/em-x270.c371
-rw-r--r--arch/arm/mach-pxa/eseries.c15
-rw-r--r--arch/arm/mach-pxa/eseries_udc.c57
-rw-r--r--arch/arm/mach-pxa/ezx.c220
-rw-r--r--arch/arm/mach-pxa/littleton.c70
-rw-r--r--arch/arm/mach-pxa/lubbock.c19
-rw-r--r--arch/arm/mach-pxa/magician.c49
-rw-r--r--arch/arm/mach-pxa/mainstone.c18
-rw-r--r--arch/arm/mach-pxa/mfp-pxa2xx.c71
-rw-r--r--arch/arm/mach-pxa/palmtx.c416
-rw-r--r--arch/arm/mach-pxa/pcm027.c31
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c74
-rw-r--r--arch/arm/mach-pxa/poodle.c1
-rw-r--r--arch/arm/mach-pxa/pxa25x.c59
-rw-r--r--arch/arm/mach-pxa/pxa300.c19
-rw-r--r--arch/arm/mach-pxa/pxa320.c21
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c25
-rw-r--r--arch/arm/mach-pxa/pxa930.c190
-rw-r--r--arch/arm/mach-pxa/reset.c96
-rw-r--r--arch/arm/mach-pxa/saar.c84
-rw-r--r--arch/arm/mach-pxa/spitz.c10
-rw-r--r--arch/arm/mach-pxa/ssp.c13
-rw-r--r--arch/arm/mach-pxa/tavorevb.c84
-rw-r--r--arch/arm/mach-pxa/tosa-bt.c150
-rw-r--r--arch/arm/mach-pxa/tosa.c382
-rw-r--r--arch/arm/mach-pxa/trizeps4.c1
-rw-r--r--arch/arm/mach-pxa/zylonite.c103
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c46
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c6
-rw-r--r--arch/arm/mach-sa1100/clock.c2
-rw-r--r--arch/arm/mm/Makefile2
-rw-r--r--arch/arm/tools/mach-types10
48 files changed, 5078 insertions, 505 deletions
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index c8e8f0ea59e..0a8e1ff2af8 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
if (!sachip)
return -ENOMEM;
- sachip->clk = clk_get(me, "GPIO27_CLK");
+ sachip->clk = clk_get(me, "SA1111_CLK");
if (!sachip->clk) {
ret = PTR_ERR(sachip->clk);
goto err_free;
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
new file mode 100644
index 00000000000..2a84d557adc
--- /dev/null
+++ b/arch/arm/configs/ezx_defconfig
@@ -0,0 +1,1614 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc3
+# Mon Jul 7 17:52:21 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_PXA_EZX=y
+CONFIG_MACH_EZX_A780=y
+CONFIG_MACH_EZX_E680=y
+CONFIG_MACH_EZX_A1200=y
+CONFIG_MACH_EZX_A910=y
+CONFIG_MACH_EZX_E6=y
+CONFIG_MACH_EZX_E2=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_EZX_PCAP=y
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_PXA27x is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 914bb33dab9..e8ee7ec9ff6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,18 +16,24 @@ config CPU_PXA310
config CPU_PXA320
bool "PXA320 (codename Monahans-P)"
+config CPU_PXA930
+ bool "PXA930 (codename Tavor-P)"
+
endmenu
endif
-menu "Select target boards"
-
config ARCH_GUMSTIX
bool "Gumstix XScale boards"
help
Say Y here if you intend to run this kernel on a
Gumstix Full Function Minature Computer.
+config MACH_GUMSTIX_F
+ bool "Basix, Connex, ws-200ax, ws-400ax systems"
+ depends on ARCH_GUMSTIX
+ select PXA25x
+
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select PXA25x
@@ -58,6 +64,57 @@ config PXA_SHARPSL
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config MACH_POODLE
+ bool "Enable Sharp SL-5600 (Poodle) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select SHARP_LOCOMO
+ select PXA_SSP
+
+config MACH_CORGI
+ bool "Enable Sharp SL-C700 (Corgi) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+ bool "Enable Sharp SL-C750 (Shepherd) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+ bool "Enable Sharp SL-C760 (Husky) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_AKITA
+ bool "Enable Sharp SL-1000 (Akita) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
+ select MACH_SPITZ
+ select I2C
+ select I2C_PXA
+
+config MACH_SPITZ
+ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+ bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+ bool "Enable Sharp SL-6000x (Tosa) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
@@ -70,10 +127,19 @@ config MACH_E330
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
+config MACH_E350
+ bool "Toshiba e350"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e350 family PDA.
+
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
@@ -82,6 +148,7 @@ config MACH_E750
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
@@ -98,6 +165,7 @@ config MACH_E800
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
@@ -106,6 +174,10 @@ config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
select PXA27x
+config MACH_TRIZEPS4_CONXS
+ bool "ConXS Eval Board"
+ depends on MACH_TRIZEPS4
+
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
@@ -115,7 +187,7 @@ config MACH_COLIBRI
select PXA27x
config MACH_ZYLONITE
- bool "PXA3xx Development Platform"
+ bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
select HAVE_PWM
@@ -124,6 +196,16 @@ config MACH_LITTLETON
select PXA3xx
select PXA_SSP
+config MACH_TAVOREVB
+ bool "PXA930 Evaluation Board (aka TavorEVB)"
+ select PXA3xx
+ select PXA930
+
+config MACH_SAAR
+ bool "PXA930 Handheld Platform (aka SAAR)"
+ select PXA3xx
+ select PXA930
+
config MACH_ARMCORE
bool "CompuLab CM-X270 modules"
select PXA27x
@@ -131,7 +213,6 @@ config MACH_ARMCORE
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
- depends on ARCH_PXA
select PXA27x
select IWMMXT
@@ -139,18 +220,26 @@ config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
+ select PXA_SSP
-endmenu
+config ARCH_PXA_PALM
+ bool "PXA based Palm PDAs"
+ select HAVE_PWM
-choice
- prompt "Used baseboard"
- depends on MACH_PCM027
+config MACH_PALMTX
+ bool "Palm T|X"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm T|X
+ handheld computer.
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
-
-endchoice
+ depends on MACH_PCM027
choice
prompt "display on pcm990"
@@ -167,88 +256,45 @@ config PCM990_DISPLAY_NONE
endchoice
-if ARCH_GUMSTIX
-
-choice
- prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
- bool "Basix, Connex, ws-200ax, ws-400ax systems"
- select PXA25x
-
-endchoice
-
-endif
+config PXA_EZX
+ bool "Motorola EZX Platform"
+ select PXA27x
+ select IWMMXT
+ select HAVE_PWM
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+ bool "Motorola EZX A780"
+ default y
+ depends on PXA_EZX
-choice
- prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+ bool "Motorola EZX E680"
+ default y
+ depends on PXA_EZX
-config MACH_TRIZEPS4_CONXS
- bool "ConXS Eval Board"
+config MACH_EZX_A1200
+ bool "Motorola EZX A1200"
+ default y
+ depends on PXA_EZX
-config MACH_TRIZEPS4_ANY
- bool "another Board"
+config MACH_EZX_A910
+ bool "Motorola EZX A910"
+ default y
+ depends on PXA_EZX
-endchoice
+config MACH_EZX_E6
+ bool "Motorola EZX E6"
+ default y
+ depends on PXA_EZX
-endif
+config MACH_EZX_E2
+ bool "Motorola EZX E2"
+ default y
+ depends on PXA_EZX
endmenu
-config MACH_POODLE
- bool "Enable Sharp SL-5600 (Poodle) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select SHARP_LOCOMO
- select PXA_SSP
-
-config MACH_CORGI
- bool "Enable Sharp SL-C700 (Corgi) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
- bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
-
-config MACH_HUSKY
- bool "Enable Sharp SL-C760 (Husky) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
-
-config MACH_AKITA
- bool "Enable Sharp SL-1000 (Akita) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
- select MACH_SPITZ
- select I2C
- select I2C_PXA
-
-config MACH_SPITZ
- bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
- bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
-
-config MACH_TOSA
- bool "Enable Sharp SL-6000x (Tosa) Support"
- depends on PXA_SHARPSL
- select PXA25x
-
config PXA25x
bool
help
@@ -288,4 +334,13 @@ config PXA_PWM
default BACKLIGHT_PWM
help
Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+ tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+ depends on MACH_TOSA
+ select RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on tosa.
+
endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4..99ecbe7f850 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,7 +4,7 @@
# Common support (must be linked before board specific support)
obj-y += clock.o devices.o generic.o irq.o dma.o \
- time.o gpio.o
+ time.o gpio.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
+obj-$(CONFIG_CPU_PXA930) += pxa930.o
# Specific board support
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
@@ -36,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740) += e740_lcd.o
+obj-$(CONFIG_MACH_E750) += e750_lcd.o
+obj-$(CONFIG_MACH_E400) += e400_lcd.o
+obj-$(CONFIG_MACH_E800) += e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX) += palmtx.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
@@ -44,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
+obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
+obj-$(CONFIG_MACH_SAAR) += saar.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
+obj-$(CONFIG_PXA_EZX) += ezx.o
# Support for blinky lights
led-y := leds.o
@@ -59,3 +68,5 @@ obj-$(CONFIG_LEDS) += $(led-y)
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
endif
+
+obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index b4d04955dcb..630063ffa6f 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
EXPORT_SYMBOL(clk_get_rate);
-static void clk_gpio27_enable(struct clk *clk)
-{
- pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
- .enable = clk_gpio27_enable,
- .disable = clk_gpio27_disable,
-};
-
-
void clk_cken_enable(struct clk *clk)
{
CKEN |= 1 << clk->cken;
@@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
.disable = clk_cken_disable,
};
-static struct clk common_clks[] = {
- {
- .name = "GPIO27_CLK",
- .ops = &clk_gpio27_ops,
- .rate = 3686400,
- },
-};
-
void clks_register(struct clk *clks, size_t num)
{
int i;
@@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
list_add(&clks[i].node, &clocks);
mutex_unlock(&clocks_mutex);
}
-
-static int __init clk_init(void)
-{
- clks_register(common_clks, ARRAY_SIZE(common_clks));
- return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 83cbfaba485..1ec8f9178aa 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -47,9 +47,42 @@ struct clk {
.other = _other, \
}
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev) \
+ { \
+ .name = _name, \
+ .dev = _dev, \
+ .ops = _ops, \
+ .rate = _rate, \
+ .delay = _delay, \
+ }
+
extern const struct clkops clk_cken_ops;
void clk_cken_enable(struct clk *clk);
void clk_cken_disable(struct clk *clk);
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev) \
+ { \
+ .name = _name, \
+ .dev = _dev, \
+ .ops = &clk_pxa3xx_cken_ops, \
+ .rate = _rate, \
+ .cken = CKEN_##_cken, \
+ .delay = _delay, \
+ }
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev) \
+ { \
+ .name = _name, \
+ .dev = _dev, \
+ .ops = _ops, \
+ .cken = CKEN_##_cken, \
+ }
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
void clks_register(struct clk *clks, size_t num);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 319c9ff3ab9..bcf0cde6ccc 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
*
* Bits taken from various places.
*
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
/*
* Only first 64MB of memory can be accessed via PCI.
@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
unsigned int sz = SZ_64M >> PAGE_SHIFT;
if (machine_is_armcore()) {
- pr_info("Adjusting zones for CM-x270\n");
+ pr_info("Adjusting zones for CM-X270\n");
/*
* Only adjust if > 64M on current system
@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
- GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+ GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
it8152_irq_demux(irq, desc);
}
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
{
it8152_init_irq();
- pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
- set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
- set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
- cmx270_it8152_irq_demux);
+ cmx270_it8152_irq_gpio = irq_gpio;
+
+ set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+
+ set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
}
#ifdef CONFIG_PM
@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/*
Here comes the ugly part. The routing is baseboard specific,
- but defining a platform for each possible base of CM-x270 is
- unrealistic. Here we keep mapping for ATXBase and SB-x270.
+ but defining a platform for each possible base of CM-X270 is
+ unrealistic. Here we keep mapping for ATXBase and SB-X270.
*/
/* ATXBASE PCI slot */
if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a..48f532f4cb5 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
extern void __cmx270_pci_suspend(void);
extern void __cmx270_pci_resume(void);
#ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
#else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 01b9964acec..402e807eae5 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-pxa/cm-x270.c
*
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@@ -9,44 +9,156 @@
* published by the Free Software Foundation.
*/
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
#include <linux/platform_device.h>
-#include <linux/irq.h>
#include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
#include <video/mbxfb.h>
+#include <linux/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
#include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
#include <asm/hardware/it8152.h>
#include "generic.h"
#include "cm-x270-pci.h"
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE (0xe8000000)
+#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
+
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ (10)
+#define GPIO22_IT8152_IRQ (22)
+#define GPIO83_MMC_IRQ (83)
+#define GPIO95_GFXIRQ (95)
+
+#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER (105)
+
+static unsigned long cmx270_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_AC97_nRESET,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MCI controller */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_SSP2_SFRM,
+ GPIO87_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+ GPIO49_nPWE,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
+ GPIO53_GPIO, /* PC card reset */
+
+ /* NAND controls */
+ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+ GPIO89_GPIO, /* NAND Ready/Busy */
+
+ /* interrupts */
+ GPIO10_GPIO, /* DM9000 interrupt */
+ GPIO83_GPIO, /* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
[0] = {
.start = DM9000_PHYS_BASE,
.end = DM9000_PHYS_BASE + 4,
@@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
}
};
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
.name = "dm9000",
.id = 0,
- .num_resources = ARRAY_SIZE(cmx270_dm9k_resource),
- .resource = cmx270_dm9k_resource,
+ .num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
+ .resource = cmx270_dm9000_resource,
.dev = {
- .platform_data = &cmx270_dm9k_platdata,
+ .platform_data = &cmx270_dm9000_platdata,
}
};
-/* touchscreen controller */
+static void __init cmx270_init_dm9000(void)
+{
+ platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static struct platform_device cmx270_ts_device = {
.name = "ucb1400_ts",
.id = -1,
};
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+ platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource cmx270_v3020_resource[] = {
[0] = {
.start = RTC_PHYS_BASE,
@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
}
};
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+ platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+ [0] = {
+ .name = "cm-x270:red",
+ .default_trigger = "nand-disk",
+ .gpio = 93,
+ .active_low = 1,
+ },
+ [1] = {
+ .name = "cm-x270:green",
+ .default_trigger = "heartbeat",
+ .gpio = 94,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+ .num_leds = ARRAY_SIZE(cmx270_leds),
+ .leds = cmx270_leds,
+};
+
static struct platform_device cmx270_led_device = {
- .name = "cm-x270-led",
+ .name = "leds-gpio",
.id = -1,
+ .dev = {
+ .platform_data = &cmx270_gpio_led_pdata,
+ },
};
+static void __init cmx270_init_leds(void)
+{
+ platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
/* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
static u64 fb_dma_mask = ~(u64)0;
static struct resource cmx270_2700G_resource[] = {
/* frame buffer memory including ODFB and External SDRAM */
[0] = {
- .start = MARATHON_PHYS,
- .end = MARATHON_PHYS + 0x02000000,
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 0x01ffffff,
.flags = IORESOURCE_MEM,
},
/* Marathon registers */
[1] = {
- .start = MARATHON_PHYS + 0x03fe0000,
- .end = MARATHON_PHYS + 0x03ffffff,
+ .start = PXA_CS2_PHYS + 0x03fe0000,
+ .end = PXA_CS2_PHYS + 0x03ffffff,
.flags = IORESOURCE_MEM,
},
};
@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
.id = -1,
};
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
- .name = "pata_cm_x270",
- .id = -1,
- .dev = {
- .dma_mask = &ata_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
- &cmx270_device_dm9k,
- &cmx270_rtc_device,
- &cmx270_2700G,
- &cmx270_led_device,
- &cmx270_ts_device,
- &cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
- [0] = { /* IDE/general purpose space */
- .virtual = CMX270_IDE104_VIRT,
- .pfn = __phys_to_pfn(CMX270_IDE104_PHYS),
- .length = SZ_64M - SZ_8M,
- .type = MT_DEVICE
- },
- [1] = { /* PCI bridge */
- .virtual = CMX270_IT8152_VIRT,
- .pfn = __phys_to_pfn(CMX270_IT8152_PHYS),
- .length = SZ_64M,
- .type = MT_DEVICE
- },
-};
+static void __init cmx270_init_2700G(void)
+{
+ platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
/*
Display definitions
keep these for backwards compatibility, although symbolic names (as
@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
*/
__setup("monitor=", cmx270_set_display);
+static void __init cmx270_init_display(void)
+{
+ set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
/* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int cmx270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
.init = cmx270_ohci_init,
};
+static void __init cmx270_init_ohci(void)
+{
+ pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int cmx270_mci_init(struct device *dev,
irq_handler_t cmx270_detect_int,
void *data)
{
int err;
- /*
- * setup GPIO for PXA27x MMC controller
- */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
- /* SB-X270 uses GPIO105 as SD power enable */
- pxa_gpio_mode(105 | GPIO_OUT);
+ err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+ if (err) {
+ dev_warn(dev, "power gpio unavailable\n");
+ return err;
+ }
- /* card detect IRQ on GPIO 83 */
- pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+ gpio_direction_output(GPIO105_MMC_POWER, 0);
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err)
- printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
- " request MMC card detect IRQ\n");
+ if (err) {
+ gpio_free(GPIO105_MMC_POWER);
+ dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+ " request MMC card detect IRQ\n");
+ }
return err;
}
@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask) {
- printk(KERN_DEBUG "%s: on\n", __func__);
- GPCR(105) = GPIO_bit(105);
+ dev_dbg(dev, "power on\n");
+ gpio_set_value(GPIO105_MMC_POWER, 0);
} else {
- GPSR(105) = GPIO_bit(105);
- printk(KERN_DEBUG "%s: off\n", __func__);
+ gpio_set_value(GPIO105_MMC_POWER, 1);
+ dev_dbg(dev, "power off\n");
}
}
static void cmx270_mci_exit(struct device *dev, void *data)
{
free_irq(CMX270_MMC_IRQ, data);
+ gpio_free(GPIO105_MMC_POWER);
}
static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
.exit = cmx270_mci_exit,
};
+static void __init cmx270_init_mmc(void)
+{
+ pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
#ifdef CONFIG_PM
static unsigned long sleep_save_msc[10];
@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
static int __init cmx270_pm_init(void) { return 0; }
#endif
-static void __init cmx270_init(void)
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
{
- cmx270_pm_init();
-
- set_pxa_fb_info(cmx270_display);
-
- /* register CM-X270 platform devices */
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
- /* set MCI and OHCI platform parameters */
- pxa_set_mci_info(&cmx270_mci_platform_data);
- pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
- /* This enables the STUART */
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
+static void __init cmx270_init(void)
+{
+ cmx270_pm_init();
- /* This enables the BTUART */
- pxa_gpio_mode(GPIO42_BTRXD_MD);
- pxa_gpio_mode(GPIO43_BTTXD_MD);
- pxa_gpio_mode(GPIO44_BTCTS_MD);
- pxa_gpio_mode(GPIO45_BTRTS_MD);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+ cmx270_init_dm9000();
+ cmx270_init_rtc();
+ cmx270_init_display();
+ cmx270_init_mmc();
+ cmx270_init_ohci();
+ cmx270_init_ac97();
+ cmx270_init_touchscreen();
+ cmx270_init_leds();
+ cmx270_init_2700G();
}
static void __init cmx270_init_irq(void)
{
pxa27x_init_irq();
+ cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
- cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+ [0] = { /* PCI bridge */
+ .virtual = CMX270_IT8152_VIRT,
+ .pfn = __phys_to_pfn(PXA_CS4_PHYS),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
+};
- /* Setup interrupt for dm9000 */
- pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
- set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
- /* Setup interrupt for 2700G */
- pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
- set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+ it8152_base_address = CMX270_IT8152_VIRT;
}
-
+#else
static void __init cmx270_map_io(void)
{
pxa_map_io();
- iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
}
-
+#endif
MACHINE_START(ARMCORE, "Compulab CM-x270")
.boot_params = 0xa0000100,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b37671b7188..e58504edb14 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -465,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
else
GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+ pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data corgi_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a6f2390ce66..84489dc51d8 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -13,8 +13,10 @@
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa2xx_spi.h>
#include <asm/arch/camera.h>
#include <asm/arch/audio.h>
+#include <asm/arch/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
@@ -830,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
pxa_register_device(&pxa3xx_device_mci3, info);
}
+static struct resource pxa3xx_resources_nand[] = {
+ [0] = {
+ .start = 0x43100000,
+ .end = 0x43100053,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_NAND,
+ .end = IRQ_NAND,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for Data DMA */
+ .start = 97,
+ .end = 97,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for Command DMA */
+ .start = 99,
+ .end = 99,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+ .name = "pxa3xx-nand",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa3xx_nand_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_nand),
+ .resource = pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_nand, info);
+}
#endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+ struct platform_device *pd;
+
+ pd = platform_device_alloc("pxa2xx-spi", id);
+ if (pd == NULL) {
+ printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+ id);
+ return;
+ }
+
+ pd->dev.platform_data = info;
+ platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index b852eb18daa..887c738f591 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -31,4 +31,6 @@ extern struct platform_device pxa25x_device_pwm1;
extern struct platform_device pxa27x_device_pwm0;
extern struct platform_device pxa27x_device_pwm1;
+extern struct platform_device pxa3xx_device_nand;
+
void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
new file mode 100644
index 00000000000..16c02363062
--- /dev/null
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -0,0 +1,56 @@
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+ .pixclock = 140703,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 28,
+ .right_margin = 8,
+ .vsync_len = 3,
+ .upper_margin = 5,
+ .lower_margin = 6,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+ .modes = &e400_pxafb_mode_info,
+ .num_modes = 1,
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = 0,
+ .pxafb_backlight_power = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+ if (!machine_is_e400())
+ return -ENODEV;
+
+ set_pxa_fb_info(&e400_pxafb_mach_info);
+ return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
new file mode 100644
index 00000000000..26bd599af17
--- /dev/null
+++ b/arch/arm/mach-pxa/e740_lcd.c
@@ -0,0 +1,123 @@
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+ .lcd_format = 0x00008023,
+ .lcdd_cntl1 = 0x0f000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00ffff03,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 20,
+ .right_margin = 28,
+ .upper_margin = 9,
+ .lower_margin = 8,
+ .crtc_ss = 0x80140013,
+ .crtc_ls = 0x81150110,
+ .crtc_gs = 0x80050005,
+ .crtc_vpos_gs = 0x000a0009,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa906000a,
+ .crtc_gclk = 0x80050108,
+ .crtc_goe = 0x80050108,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+ .crtc_ps1_active = 0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+ .init_data1 = 0x21002103,
+ .gpio_dir1 = 0xffffdeff,
+ .gpio_oe1 = 0x03c00643,
+ .init_data2 = 0x003f003f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+ .modelist = &e740_lcd_mode,
+ .num_modes = 1,
+ .regs = &e740_lcd_regs,
+ .gpio = &e740_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e740_fb_resources),
+ .resource = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+ int ret;
+
+ if (!machine_is_e740())
+ return -ENODEV;
+
+ return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
new file mode 100644
index 00000000000..75edc3b5390
--- /dev/null
+++ b/arch/arm/mach-pxa/e750_lcd.c
@@ -0,0 +1,109 @@
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 21,
+ .right_margin = 22,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0x8014000d,
+ .crtc_gs = 0xc1000005,
+ .crtc_vpos_gs = 0x00020147,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x80cc0015,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x61060017,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+ .init_data1 = 0x01192f1b,
+ .gpio_dir1 = 0xd5ffdeff,
+ .gpio_oe1 = 0x000020bf,
+ .init_data2 = 0x010f010f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+ .modelist = &e750_lcd_mode,
+ .num_modes = 1,
+ .regs = &e750_lcd_regs,
+ .gpio = &e750_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e750_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e750_fb_resources),
+ .resource = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+ if (!machine_is_e750())
+ return -ENODEV;
+
+ return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
new file mode 100644
index 00000000000..e6aeab0ebc2
--- /dev/null
+++ b/arch/arm/mach-pxa/e800_lcd.c
@@ -0,0 +1,159 @@
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x02a00000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x000ff2a3,
+ .genlcd_cntl2 = 0x000002a3,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+ [0] = {
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 52,
+ .right_margin = 148,
+ .upper_margin = 2,
+ .lower_margin = 6,
+ .crtc_ss = 0x80350034,
+ .crtc_ls = 0x802b0026,
+ .crtc_gs = 0x80160016,
+ .crtc_vpos_gs = 0x00020003,
+ .crtc_rev = 0x0040001d,
+ .crtc_dclk = 0xe0000000,
+ .crtc_gclk = 0x82a50049,
+ .crtc_goe = 0x80ee001c,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 128,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 6,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ },
+ [1] = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 15,
+ .right_margin = 88,
+ .upper_margin = 0,
+ .lower_margin = 7,
+ .crtc_ss = 0xd010000f,
+ .crtc_ls = 0x80070003,
+ .crtc_gs = 0x80000000,
+ .crtc_vpos_gs = 0x01460147,
+ .crtc_rev = 0x00400003,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x814b0008,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 100,
+ .pixclk_divider = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+ .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+ .init_data1 = 0xc13fc019,
+ .gpio_dir1 = 0x3e40df7f,
+ .gpio_oe1 = 0x003c3000,
+ .init_data2 = 0x00000000,
+ .gpio_dir2 = 0x00000000,
+ .gpio_oe2 = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+ .ext_cntl = 0x09640011,
+ .sdram_mode_reg = 0x00600021,
+ .ext_timing_cntl = 0x10001545,
+ .io_cntl = 0x7ddd7333,
+ .size = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+ unsigned long tmp;
+
+ tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+ if (par->mode->xres == 480)
+ tmp |= 0x100;
+ else
+ tmp &= ~0x100;
+ w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+ .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+ .modelist = e800_lcd_mode,
+ .num_modes = 2,
+ .regs = &e800_lcd_regs,
+ .gpio = &e800_w100_gpio_info,
+ .mem = &e800_w100_mem_info,
+ .tg = &e800_tg_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e800_fb_resources),
+ .resource = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+ if (!machine_is_e800())
+ return -ENODEV;
+
+ return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1bf68074992..e5cc6ca63c7 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
/*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
*
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
-
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
-
#include <asm/mach/arch.h>
+#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <asm/arch/pxa27x_keypad.h>
#include "generic.h"
/* GPIO IRQ usage */
-#define EM_X270_MMC_PD (105)
-#define EM_X270_ETHIRQ IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ IRQ_GPIO(13)
+#define GPIO41_ETHIRQ (41)
+#define GPIO13_MMC_CD (13)
+#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS (11)
+#define GPIO56_NAND_RB (56)
+
+static unsigned long em_x270_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_AC97_nRESET,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MCI controller */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* QCI */
+ GPIO84_CIF_FV,
+ GPIO25_CIF_LV,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO81_CIF_DD_0,
+ GPIO55_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO50_CIF_DD_3,
+ GPIO52_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* Keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO96_KP_MKOUT_6,
+ GPIO22_KP_MKOUT_7,
+
+ /* SSP1 */
+ GPIO26_SSP1_RXD,
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO57_SSP1_TXD,
+
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_SSP2_SFRM,
+ GPIO89_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO49_nPWE,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* power controls */
+ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
+ GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
+
+ /* NAND controls */
+ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+
+ /* interrupts */
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO41_GPIO, /* DM9000 interrupt */
+};
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
[0] = {
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 3,
@@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
}
};
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
.name = "dm9000",
.id = 0,
- .num_resources = ARRAY_SIZE(em_x270_dm9k_resource),
- .resource = em_x270_dm9k_resource,
+ .num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
+ .resource = em_x270_dm9000_resource,
.dev = {
- .platform_data = &em_x270_dm9k_platdata,
+ .platform_data = &em_x270_dm9000_platdata,
}
};
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
- .name = "wm97xx-ts",
- .id = -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+ platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource em_x270_v3020_resource[] = {
[0] = {
.start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
}
};
-/* NAND flash */
-#define GPIO_NAND_CS (11)
-#define GPIO_NAND_RB (56)
+static void __init em_x270_init_rtc(void)
+{
+ platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static inline void nand_cs_on(void)
{
- GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+ gpio_set_value(GPIO11_NAND_CS, 0);
}
static void nand_cs_off(void)
{
dsb();
- GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+ gpio_set_value(GPIO11_NAND_CS, 1);
}
/* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
{
dsb();
- return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+ return gpio_get_value(GPIO56_NAND_RB);
}
static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
}
};
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
- &em_x270_dm9k,
- &em_x270_ts,
- &em_x270_rtc,
- &em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+ int err;
+ err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+ if (err) {
+ pr_warning("EM-X270: failed to request NAND CS gpio\n");
+ return;
+ }
+
+ gpio_direction_output(GPIO11_NAND_CS, 1);
+
+ err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+ if (err) {
+ pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+ gpio_free(GPIO11_NAND_CS);
+ return;
+ }
+
+ gpio_direction_input(GPIO56_NAND_RB);
+
+ platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
/* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.init = em_x270_ohci_init,
};
+static void __init em_x270_init_ohci(void)
+{
+ pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
{
- int err;
-
- /* setup GPIO for PXA27x MMC controller */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
- /* EM-X270 uses GPIO13 as SD power enable */
- pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
- err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
+ int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
__func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static void em_x270_mci_exit(struct device *dev, void *data)
{
- free_irq(EM_X270_MMC_IRQ, data);
+ int irq = gpio_to_irq(GPIO13_MMC_CD);
+ free_irq(irq, data);
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
.exit = em_x270_mci_exit,
};
+static void __init em_x270_init_mmc(void)
+{
+ pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
/* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info em_x270_lcd_mode = {
.pixclock = 50000,
.bpp = 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
static struct pxafb_mach_info em_x270_lcd = {
.modes = &em_x270_lcd_mode,
.num_modes = 1,
- .cmap_inverse = 0,
- .cmap_static = 0,
- .lccr0 = LCCR0_PAS,
- .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
};
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
{
- /* setup LCD */
set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
- /* register EM-X270 platform devices */
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+ KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+ KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+ KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
- /* set MCI and OHCI platform parameters */
- pxa_set_mci_info(&em_x270_mci_platform_data);
- pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+ /* code map for the matrix keys */
+ .matrix_key_rows = 3,
+ .matrix_key_cols = 3,
+ .matrix_key_map = em_x270_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+ pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
- /* setup STUART GPIOs */
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+ [0] = {
+ .desc = "sleep/wakeup",
+ .code = KEY_SUSPEND,
+ .type = EV_PWR,
+ .gpio = 1,
+ .wakeup = 1,
+ },
+};
- /* setup BTUART GPIOs */
- pxa_gpio_mode(GPIO42_BTRXD_MD);
- pxa_gpio_mode(GPIO43_BTTXD_MD);
- pxa_gpio_mode(GPIO44_BTCTS_MD);
- pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+ .buttons = gpio_keys_button,
+ .nbuttons = 1,
+};
- /* Setup interrupt for dm9000 */
- set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &em_x270_gpio_keys_data,
+ },
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+ platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+ em_x270_init_dm9000();
+ em_x270_init_rtc();
+ em_x270_init_nand();
+ em_x270_init_lcd();
+ em_x270_init_mmc();
+ em_x270_init_ohci();
+ em_x270_init_keypad();
+ em_x270_init_gpio_keys();
+ em_x270_init_ac97();
}
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93c876..c29b7b21c11 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -17,7 +17,7 @@
#include <asm/arch/hardware.h>
#include <asm/mach-types.h>
-#include <generic.h>
+#include "generic.h"
/* Only e800 has 128MB RAM */
static void __init eseries_fixup(struct machine_desc *desc,
@@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
MACHINE_END
#endif
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
#ifdef CONFIG_MACH_E740
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
new file mode 100644
index 00000000000..362847a1099
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -0,0 +1,57 @@
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/arch/udc.h>
+#include <asm/arch/eseries-gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+ .gpio_vbus = GPIO_E7XX_USB_DISC,
+ .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+ .gpio_vbus = GPIO_E800_USB_DISC,
+ .gpio_pullup = GPIO_E800_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+ if (machine_is_e330() || machine_is_e350() ||
+ machine_is_e740() || machine_is_e750() ||
+ machine_is_e400())
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+ else if (machine_is_e800())
+ pxa_set_udc_info(&e800_udc_mach_info);
+
+ return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 00000000000..0143eed6539
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ * ezx.c - Common code for the EZX platform.
+ *
+ * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/i2c.h>
+
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 1023,
+ .dft_brightness = 1023,
+ .pwm_period_ns = 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &ezx_backlight_data,
+ },
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+ .pixclock = 150000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 10,
+ .left_margin = 20,
+ .right_margin = 10,
+ .vsync_len = 2,
+ .upper_margin = 3,
+ .lower_margin = 2,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+ .modes = &mode_ezx_old,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+ .pixclock = 192308,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 32,
+ .depth = 18,
+ .hsync_len = 10,
+ .left_margin = 20,
+ .right_margin = 10,
+ .vsync_len = 2,
+ .upper_margin = 3,
+ .lower_margin = 2,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+ .modes = &mode_72r89803y01,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+ /* PWM backlight */
+ GPIO16_PWM0_OUT,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* For A780 support (connected with Neptune GSM chip) */
+ GPIO30_USB_P3_2, /* ICL_TXENB */
+ GPIO31_USB_P3_6, /* ICL_VPOUT */
+ GPIO90_USB_P3_5, /* ICL_VPIN */
+ GPIO91_USB_P3_1, /* ICL_XRXD */
+ GPIO56_USB_P3_4, /* ICL_VMOUT */
+ GPIO113_USB_P3_3, /* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa_set_i2c_info(NULL);
+ if (machine_is_ezx_a780() || machine_is_ezx_e680())
+ set_pxa_fb_info(&ezx_fb_info_1);
+ else
+ set_pxa_fb_info(&ezx_fb_info_2);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+ char **cmdline, struct meminfo *mi)
+{
+ /* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+ * 16MB one at 0xAC000000
+ */
+ mi->nr_banks = 2;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ mi->bank[0].size = (32*1024*1024);
+ mi->bank[1].start = 0xac000000;
+ mi->bank[1].node = 1;
+ mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = ezx_fixup,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb..dd759d03a9f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/smc91x.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -38,6 +39,7 @@
#include <asm/arch/pxafb.h>
#include <asm/arch/ssp.h>
#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
#include <asm/arch/littleton.h>
#include "generic.h"
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
.end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
}
};
+static struct smc91x_platdata littleton_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+ SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &littleton_smc91x_info,
+ },
};
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
/* use bit 30, 31 as the indicator of command parameter number */
#define CMD0(x) ((0x00000000) | ((x) << 9))
#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
}
#else
static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int littleton_matrix_key_map[] = {
/* KEY(row, col, key_code) */
KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
static inline void littleton_init_keypad(void) {}
#endif
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+ [0] = {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = 0x060000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [1] = {
+ .name = "Kernel",
+ .offset = 0x060000,
+ .size = 0x200000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [2] = {
+ .name = "Filesystem",
+ .offset = 0x0260000,
+ .size = 0x3000000, /* 48M - rootfs */
+ },
+ [3] = {
+ .name = "MassStorage",
+ .offset = 0x3260000,
+ .size = 0x3d40000,
+ },
+ [4] = {
+ .name = "BBT",
+ .offset = 0x6FA0000,
+ .size = 0x80000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* NOTE: we reserve some blocks at the end of the NAND flash for
+ * bad block management, and the max number of relocation blocks
+ * differs on different platforms. Please take care with it when
+ * defining the partition table.
+ */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+ .enable_arbiter = 1,
+ .parts = littleton_nand_partitions,
+ .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+ pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
static void __init littleton_init(void)
{
/* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
littleton_init_lcd();
littleton_init_keypad();
+ littleton_init_nand();
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a3fae413920..ac26423cd20 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -226,14 +227,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = {
.num_chipselect = 0,
};
-static struct platform_device pxa_ssp = {
- .name = "pxa2xx-spi",
- .id = 1,
- .dev = {
- .platform_data = &pxa_ssp_master_info,
- },
-};
-
static int lubbock_ads7846_pendown_state(void)
{
/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
@@ -292,11 +285,18 @@ static struct resource smc91x_resources[] = {
},
};
+static struct smc91x_platdata lubbock_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &lubbock_smc91x_info,
+ },
};
static struct resource flash_resources[] = {
@@ -367,7 +367,6 @@ static struct platform_device *devices[] __initdata = {
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
- &pxa_ssp,
};
static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -471,6 +470,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
} else if (mode & IR_FIRMODE) {
LUB_MISC_WR |= 1 << 4;
}
+ pxa2xx_transceiver_mode(dev, mode);
local_irq_restore(flags);
}
@@ -501,6 +501,7 @@ static void __init lubbock_init(void)
lubbock_flash_data[flashboot].name = "boot-rom";
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 01b2fa79021..c9d274f0048 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,17 +17,15 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mfd/htc-egpio.h>
#include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
-#include <asm/gpio.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -44,7 +42,7 @@
#include "devices.h"
#include "generic.h"
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
/* SDRAM and Static Memory I/O Signals */
GPIO20_nSDCS_2,
@@ -134,6 +132,7 @@ static unsigned long magician_pin_config[] = {
static void magician_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data magician_ficp_info = {
@@ -399,6 +398,7 @@ static struct platform_pwm_backlight_data backlight_data = {
static struct platform_device backlight = {
.name = "pwm-backlight",
+ .id = -1,
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &backlight_data,
@@ -511,6 +511,37 @@ static struct platform_device pasic3 = {
* External power
*/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+ if (ret)
+ goto err_cs_ac;
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+ if (ret)
+ goto err_cs_usb;
+ ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+ if (ret)
+ goto err_chg_en;
+ ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+ if (!ret)
+ ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+ if (ret)
+ goto err_nchg_en;
+
+ return 0;
+
+err_nchg_en:
+ gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+ gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+ gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+ return ret;
+}
+
static int magician_is_ac_online(void)
{
return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -527,14 +558,24 @@ static void magician_set_charge(int flags)
gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
}
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+ gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+ gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+ gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
static char *magician_supplicants[] = {
"ds2760-battery.0", "backup-battery"
};
static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
.is_ac_online = magician_is_ac_online,
.is_usb_online = magician_is_usb_online,
.set_charge = magician_set_charge,
+ .exit = power_supply_exit,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
};
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2e9e7c4da8..851ec2d9b69 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,6 +26,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
GPIO45_AC97_SYSCLK,
/* Keypad */
- GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
- GPIO94_KP_DKIN_1 | WAKEUP_ON_LEVEL_HIGH,
- GPIO95_KP_DKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO93_KP_DKIN_0,
+ GPIO94_KP_DKIN_1,
+ GPIO95_KP_DKIN_2,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
}
};
+static struct smc91x_platdata mainstone_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+ SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &mainstone_smc91x_info,
+ },
};
static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -455,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
} else if (mode & IR_FIRMODE) {
MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
}
+ pxa2xx_transceiver_mode(dev, mode);
if (mode & IR_OFF) {
MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
} else {
@@ -513,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
.init = mainstone_ohci_init,
};
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int mainstone_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index d1cdb4ecb0b..fd4545eab80 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -39,6 +39,28 @@ struct gpio_desc {
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+ unsigned mask = GPIO_bit(gpio);
+
+ /* low power state */
+ switch (lpm) {
+ case MFP_LPM_DRIVE_HIGH:
+ PGSR(gpio) |= mask;
+ break;
+ case MFP_LPM_DRIVE_LOW:
+ PGSR(gpio) &= ~mask;
+ break;
+ case MFP_LPM_INPUT:
+ break;
+ default:
+ pr_warning("%s: invalid low power state for GPIO%d\n",
+ __func__, gpio);
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int __mfp_config_gpio(unsigned gpio, unsigned long c)
{
unsigned long gafr, mask = GPIO_bit(gpio);
@@ -57,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
else
GPDR(gpio) &= ~mask;
- /* low power state */
- switch (c & MFP_LPM_STATE_MASK) {
- case MFP_LPM_DRIVE_HIGH:
- PGSR(gpio) |= mask;
- break;
- case MFP_LPM_DRIVE_LOW:
- PGSR(gpio) &= ~mask;
- break;
- case MFP_LPM_INPUT:
- break;
- default:
- pr_warning("%s: invalid low power state for GPIO%d\n",
- __func__, gpio);
+ if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
return -EINVAL;
- }
/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
* configurations of those pins not able to wakeup
@@ -91,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
return 0;
}
+static inline int __mfp_validate(int mfp)
+{
+ int gpio = mfp_to_gpio(mfp);
+
+ if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+ pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+ return -1;
+ }
+
+ return gpio;
+}
+
void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
{
unsigned long flags;
@@ -99,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
- gpio = mfp_to_gpio(MFP_PIN(*c));
-
- if (!gpio_desc[gpio].valid) {
- pr_warning("%s: GPIO%d is invalid pin\n",
- __func__, gpio);
+ gpio = __mfp_validate(MFP_PIN(*c));
+ if (gpio < 0)
continue;
- }
local_irq_save(flags);
@@ -116,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
}
}
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+ unsigned long flags;
+ int gpio;
+
+ gpio = __mfp_validate(mfp);
+ if (gpio < 0)
+ return;
+
+ local_irq_save(flags);
+ __mfp_config_lpm(gpio, lpm);
+ local_irq_restore(flags);
+}
+
int gpio_set_wake(unsigned int gpio, unsigned int on)
{
struct gpio_desc *d;
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 00000000000..408657a24f8
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,416 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Alex Osborne <ato@meshy.org>
+ * Cristiano P. <cristianop@users.sourceforge.net>
+ * Jan Herman <2hp@seznam.cz>
+ * Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/palmtx.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO13_GPIO,
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ return err;
+ }
+
+ err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+ if (err)
+ goto pwr_err;
+
+ err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto ro_err;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+ro_err:
+ gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+ free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+ return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+ gpio_free(GPIO_NR_PALMTX_SD_POWER);
+ free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmtx_mci_power,
+ .get_ro = palmtx_mci_get_ro,
+ .init = palmtx_mci_init,
+ .exit = palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmtx_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmtx_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+ .buttons = palmtx_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+
+ return 0;
+err2:
+ gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_BL_POWER);
+ gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMTX_MAX_INTENSITY,
+ .dft_brightness = PALMTX_MAX_INTENSITY,
+ .pwm_period_ns = PALMTX_PERIOD_NS,
+ .init = palmtx_backlight_init,
+ .notify = palmtx_backlight_notify,
+ .exit = palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmtx_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+ gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+ udelay(50);
+ gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .udc_command = palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err_cs_ac;
+
+ ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+ if (ret)
+ goto err_cs_usb;
+
+ return 0;
+
+err_cs_usb:
+ gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+ return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+ return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+ gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmtx_is_ac_online,
+ .is_usb_online = palmtx_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmtx_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+ .modes = palmtx_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmtx_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmtx_pxa_keys,
+#endif
+ &palmtx_backlight,
+ &power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+ .virtual = PALMTX_PCMCIA_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+ .length = PALMTX_PCMCIA_SIZE,
+ .type = MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+ set_pxa_fb_info(&palmtx_lcd_screen);
+ pxa_set_mci_info(&palmtx_mci_platform_data);
+ pxa_set_udc_info(&palmtx_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmtx_ficp_platform_data);
+ pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+ .phys_io = PALMTX_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = palmtx_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb0aee..377f3be8ce5 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,7 +24,9 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
#include <linux/leds.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/arch/hardware.h>
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+ .base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "max7301",
+ .platform_data = &max7301_info,
+ .max_speed_hz = 13000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+/*
+ * NOR flash
+ */
static struct physmap_flash_data pcm027_flash_data = {
.width = 4,
};
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
#ifdef CONFIG_MACH_PCM990_BASEBOARD
pcm990_baseboard_init();
#endif
+
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
static void __init pcm027_map_io(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 5d87c7c866e..30023b00e47 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -33,14 +33,30 @@
#include <asm/arch/camera.h>
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/audio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pcm990_baseboard.h>
#include <asm/arch/pxafb.h>
+#include <asm/arch/mfp-pxa27x.h>
#include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ /* USB */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ /* PWM0 */
+ GPIO16_PWM0_OUT,
+};
/*
* pcm990_lcd_power - control power supply to the LCD
@@ -277,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
{
int err;
- /*
- * enable GPIO for PXA27x MMC controller
- */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
"MMC card detect", data);
if (err)
@@ -333,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
*/
static int pcm990_ohci_init(struct device *dev)
{
- pxa_gpio_mode(PCM990_USB_OVERCURRENT);
- pxa_gpio_mode(PCM990_USB_PWR_EN);
/*
* disable USB port 2 and 3
* power sense is active low
@@ -361,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
* PXA27x Camera specific stuff
*/
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+ /* CIF */
+ GPIO98_CIF_DD_0,
+ GPIO105_CIF_DD_1,
+ GPIO104_CIF_DD_2,
+ GPIO103_CIF_DD_3,
+ GPIO95_CIF_DD_4,
+ GPIO94_CIF_DD_5,
+ GPIO93_CIF_DD_6,
+ GPIO108_CIF_DD_7,
+ GPIO107_CIF_DD_8,
+ GPIO106_CIF_DD_9,
+ GPIO42_CIF_MCLK,
+ GPIO45_CIF_PCLK,
+ GPIO43_CIF_FV,
+ GPIO44_CIF_LV,
+};
+
static int pcm990_pxacamera_init(struct device *dev)
{
- pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
- pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
- pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
- pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
- pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
- pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
- pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
- pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
- pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
- pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
- pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
- pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
- pxa_gpio_mode(GPIO43_CIF_FV_MD);
- pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
return 0;
}
@@ -449,8 +457,10 @@ static struct map_desc pcm990_io_desc[] __initdata = {
*/
void __init pcm990_baseboard_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
/* register CPLD access */
- iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+ iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
/* register CPLD's IRQ controller */
pcm990_init_irq();
@@ -458,7 +468,6 @@ void __init pcm990_baseboard_init(void)
#ifndef CONFIG_PCM990_DISPLAY_NONE
set_pxa_fb_info(&pcm990_fbinfo);
#endif
- pxa_gpio_mode(GPIO16_PWM0_MD);
platform_device_register(&pcm990_backlight_device);
/* MMC */
@@ -473,9 +482,8 @@ void __init pcm990_baseboard_init(void)
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
pxa_set_camera_info(&pcm990_pxacamera_platform_data);
- i2c_register_board_info(0, pcm990_i2c_devices,
- ARRAY_SIZE(pcm990_i2c_devices));
+ i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
#endif
- printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+ printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f81c10cafd4..39612cfa0b4 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -267,6 +267,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
} else {
GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
}
+ pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data poodle_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 4cd50e3005e..c5b845b935b 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -109,6 +109,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
.getrate = clk_pxa25x_lcd_getrate,
};
+static unsigned long gpio12_config_32k[] = {
+ GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+ GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+ pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+ pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+ .enable = clk_gpio12_enable,
+ .disable = clk_gpio12_disable,
+};
+
+static unsigned long gpio11_config_3m6[] = {
+ GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+ GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+ pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+ pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+ .enable = clk_gpio11_enable,
+ .disable = clk_gpio11_disable,
+};
+
/*
* 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
* 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -128,6 +174,8 @@ static struct clk pxa25x_clks[] = {
INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+ INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
+ INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
@@ -145,7 +193,10 @@ static struct clk pxa25x_clks[] = {
INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
};
-static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
+static struct clk pxa2xx_clk_aliases[] = {
+ INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
+ INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
+};
#ifdef CONFIG_PM
@@ -293,7 +344,7 @@ static int __init pxa25x_init(void)
int i, ret = 0;
/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
- if (cpu_is_pxa25x())
+ if (cpu_is_pxa255())
clks_register(&pxa25x_hwuart_clk, 1);
if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
@@ -317,10 +368,10 @@ static int __init pxa25x_init(void)
}
/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
- if (cpu_is_pxa25x())
+ if (cpu_is_pxa255())
ret = platform_device_register(&pxa_device_hwuart);
- clks_register(&gpio7_clk, 1);
+ clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d3877f21..da92e973388 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,10 +15,16 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/platform_device.h>
#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
#include <asm/arch/mfp-pxa300.h>
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
@@ -79,15 +85,26 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
MFP_ADDR_END,
};
+static struct clk common_clks[] = {
+ PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
+static struct clk pxa310_clks[] = {
+ PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
static int __init pxa300_init(void)
{
if (cpu_is_pxa300() || cpu_is_pxa310()) {
pxa3xx_init_mfp();
pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+ clks_register(ARRAY_AND_SIZE(common_clks));
}
- if (cpu_is_pxa310())
+ if (cpu_is_pxa310()) {
pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+ clks_register(ARRAY_AND_SIZE(pxa310_clks));
+ }
return 0;
}
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb8f8d..c557c23a1ef 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,11 +15,17 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/arch/mfp.h>
+#include <asm/arch/pxa3xx-regs.h>
#include <asm/arch/mfp-pxa320.h>
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
@@ -74,16 +80,17 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
MFP_ADDR_END,
};
-static void __init pxa320_init_mfp(void)
-{
- pxa3xx_init_mfp();
- pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
+static struct clk pxa320_clks[] = {
+ PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
static int __init pxa320_init(void)
{
- if (cpu_is_pxa320())
- pxa320_init_mfp();
+ if (cpu_is_pxa320()) {
+ pxa3xx_init_mfp();
+ pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+ clks_register(ARRAY_AND_SIZE(pxa320_clks));
+ }
return 0;
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 15685d2b8f8..f491025a0c8 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -144,7 +144,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
return hsio_clk;
}
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
{
unsigned long mask = 1ul << (clk->cken & 0x1f);
@@ -154,7 +154,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
CKENB |= mask;
}
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
{
unsigned long mask = 1ul << (clk->cken & 0x1f);
@@ -164,7 +164,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
CKENB &= ~mask;
}
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
.enable = clk_pxa3xx_cken_enable,
.disable = clk_pxa3xx_cken_disable,
};
@@ -196,24 +196,6 @@ static const struct clkops clk_pout_ops = {
.disable = clk_pout_disable,
};
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev) \
- { \
- .name = _name, \
- .dev = _dev, \
- .ops = &clk_pxa3xx_cken_ops, \
- .rate = _rate, \
- .cken = CKEN_##_cken, \
- .delay = _delay, \
- }
-
-#define PXA3xx_CK(_name, _cken, _ops, _dev) \
- { \
- .name = _name, \
- .dev = _dev, \
- .ops = _ops, \
- .cken = CKEN_##_cken, \
- }
-
static struct clk pxa3xx_clks[] = {
{
.name = "CLK_POUT",
@@ -244,7 +226,6 @@ static struct clk pxa3xx_clks[] = {
PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
- PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
};
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 00000000000..9503897d049
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR(GPIO0, 0x02e0),
+ MFP_ADDR(GPIO1, 0x02dc),
+ MFP_ADDR(GPIO2, 0x02e8),
+ MFP_ADDR(GPIO3, 0x02d8),
+ MFP_ADDR(GPIO4, 0x02e4),
+ MFP_ADDR(GPIO5, 0x02ec),
+ MFP_ADDR(GPIO6, 0x02f8),
+ MFP_ADDR(GPIO7, 0x02fc),
+ MFP_ADDR(GPIO8, 0x0300),
+ MFP_ADDR(GPIO9, 0x02d4),
+ MFP_ADDR(GPIO10, 0x02f4),
+ MFP_ADDR(GPIO11, 0x02f0),
+ MFP_ADDR(GPIO12, 0x0304),
+ MFP_ADDR(GPIO13, 0x0310),
+ MFP_ADDR(GPIO14, 0x0308),
+ MFP_ADDR(GPIO15, 0x030c),
+ MFP_ADDR(GPIO16, 0x04e8),
+ MFP_ADDR(GPIO17, 0x04f4),
+ MFP_ADDR(GPIO18, 0x04f8),
+ MFP_ADDR(GPIO19, 0x04fc),
+ MFP_ADDR(GPIO20, 0x0518),
+ MFP_ADDR(GPIO21, 0x051c),
+ MFP_ADDR(GPIO22, 0x04ec),
+ MFP_ADDR(GPIO23, 0x0500),
+ MFP_ADDR(GPIO24, 0x04f0),
+ MFP_ADDR(GPIO25, 0x0504),
+ MFP_ADDR(GPIO26, 0x0510),
+ MFP_ADDR(GPIO27, 0x0514),
+ MFP_ADDR(GPIO28, 0x0520),
+ MFP_ADDR(GPIO29, 0x0600),
+ MFP_ADDR(GPIO30, 0x0618),
+ MFP_ADDR(GPIO31, 0x0610),
+ MFP_ADDR(GPIO32, 0x060c),
+ MFP_ADDR(GPIO33, 0x061c),
+ MFP_ADDR(GPIO34, 0x0620),
+ MFP_ADDR(GPIO35, 0x0628),
+ MFP_ADDR(GPIO36, 0x062c),
+ MFP_ADDR(GPIO37, 0x0630),
+ MFP_ADDR(GPIO38, 0x0634),
+ MFP_ADDR(GPIO39, 0x0638),
+ MFP_ADDR(GPIO40, 0x063c),
+ MFP_ADDR(GPIO41, 0x0614),
+ MFP_ADDR(GPIO42, 0x0624),
+ MFP_ADDR(GPIO43, 0x0608),
+ MFP_ADDR(GPIO44, 0x0604),
+ MFP_ADDR(GPIO45, 0x050c),
+ MFP_ADDR(GPIO46, 0x0508),
+ MFP_ADDR(GPIO47, 0x02bc),
+ MFP_ADDR(GPIO48, 0x02b4),
+ MFP_ADDR(GPIO49, 0x02b8),
+ MFP_ADDR(GPIO50, 0x02c8),
+ MFP_ADDR(GPIO51, 0x02c0),
+ MFP_ADDR(GPIO52, 0x02c4),
+ MFP_ADDR(GPIO53, 0x02d0),
+ MFP_ADDR(GPIO54, 0x02cc),
+ MFP_ADDR(GPIO55, 0x029c),
+ MFP_ADDR(GPIO56, 0x02a0),
+ MFP_ADDR(GPIO57, 0x0294),
+ MFP_ADDR(GPIO58, 0x0298),
+ MFP_ADDR(GPIO59, 0x02a4),
+ MFP_ADDR(GPIO60, 0x02a8),
+ MFP_ADDR(GPIO61, 0x02b0),
+ MFP_ADDR(GPIO62, 0x02ac),
+ MFP_ADDR(GPIO63, 0x0640),
+ MFP_ADDR(GPIO64, 0x065c),
+ MFP_ADDR(GPIO65, 0x0648),
+ MFP_ADDR(GPIO66, 0x0644),
+ MFP_ADDR(GPIO67, 0x0674),
+ MFP_ADDR(GPIO68, 0x0658),
+ MFP_ADDR(GPIO69, 0x0654),
+ MFP_ADDR(GPIO70, 0x0660),
+ MFP_ADDR(GPIO71, 0x0668),
+ MFP_ADDR(GPIO72, 0x0664),
+ MFP_ADDR(GPIO73, 0x0650),
+ MFP_ADDR(GPIO74, 0x066c),
+ MFP_ADDR(GPIO75, 0x064c),
+ MFP_ADDR(GPIO76, 0x0670),
+ MFP_ADDR(GPIO77, 0x0678),
+ MFP_ADDR(GPIO78, 0x067c),
+ MFP_ADDR(GPIO79, 0x0694),
+ MFP_ADDR(GPIO80, 0x069c),
+ MFP_ADDR(GPIO81, 0x06a0),
+ MFP_ADDR(GPIO82, 0x06a4),
+ MFP_ADDR(GPIO83, 0x0698),
+ MFP_ADDR(GPIO84, 0x06bc),
+ MFP_ADDR(GPIO85, 0x06b4),
+ MFP_ADDR(GPIO86, 0x06b0),
+ MFP_ADDR(GPIO87, 0x06c0),
+ MFP_ADDR(GPIO88, 0x06c4),
+ MFP_ADDR(GPIO89, 0x06ac),
+ MFP_ADDR(GPIO90, 0x0680),
+ MFP_ADDR(GPIO91, 0x0684),
+ MFP_ADDR(GPIO92, 0x0688),
+ MFP_ADDR(GPIO93, 0x0690),
+ MFP_ADDR(GPIO94, 0x068c),
+ MFP_ADDR(GPIO95, 0x06a8),
+ MFP_ADDR(GPIO96, 0x06b8),
+ MFP_ADDR(GPIO97, 0x0410),
+ MFP_ADDR(GPIO98, 0x0418),
+ MFP_ADDR(GPIO99, 0x041c),
+ MFP_ADDR(GPIO100, 0x0414),
+ MFP_ADDR(GPIO101, 0x0408),
+ MFP_ADDR(GPIO102, 0x0324),
+ MFP_ADDR(GPIO103, 0x040c),
+ MFP_ADDR(GPIO104, 0x0400),
+ MFP_ADDR(GPIO105, 0x0328),
+ MFP_ADDR(GPIO106, 0x0404),
+
+ MFP_ADDR(nXCVREN, 0x0204),
+ MFP_ADDR(DF_CLE_nOE, 0x020c),
+ MFP_ADDR(DF_nADV1_ALE, 0x0218),
+ MFP_ADDR(DF_SCLK_E, 0x0214),
+ MFP_ADDR(DF_SCLK_S, 0x0210),
+ MFP_ADDR(nBE0, 0x021c),
+ MFP_ADDR(nBE1, 0x0220),
+ MFP_ADDR(DF_nADV2_ALE, 0x0224),
+ MFP_ADDR(DF_INT_RnB, 0x0228),
+ MFP_ADDR(DF_nCS0, 0x022c),
+ MFP_ADDR(DF_nCS1, 0x0230),
+ MFP_ADDR(nLUA, 0x0254),
+ MFP_ADDR(nLLA, 0x0258),
+ MFP_ADDR(DF_nWE, 0x0234),
+ MFP_ADDR(DF_nRE_nOE, 0x0238),
+ MFP_ADDR(DF_ADDR0, 0x024c),
+ MFP_ADDR(DF_ADDR1, 0x0250),
+ MFP_ADDR(DF_ADDR2, 0x025c),
+ MFP_ADDR(DF_ADDR3, 0x0260),
+ MFP_ADDR(DF_IO0, 0x023c),
+ MFP_ADDR(DF_IO1, 0x0240),
+ MFP_ADDR(DF_IO2, 0x0244),
+ MFP_ADDR(DF_IO3, 0x0248),
+ MFP_ADDR(DF_IO4, 0x0264),
+ MFP_ADDR(DF_IO5, 0x0268),
+ MFP_ADDR(DF_IO6, 0x026c),
+ MFP_ADDR(DF_IO7, 0x0270),
+ MFP_ADDR(DF_IO8, 0x0274),
+ MFP_ADDR(DF_IO9, 0x0278),
+ MFP_ADDR(DF_IO10, 0x027c),
+ MFP_ADDR(DF_IO11, 0x0280),
+ MFP_ADDR(DF_IO12, 0x0284),
+ MFP_ADDR(DF_IO13, 0x0288),
+ MFP_ADDR(DF_IO14, 0x028c),
+ MFP_ADDR(DF_IO15, 0x0290),
+
+ MFP_ADDR(GSIM_UIO, 0x0314),
+ MFP_ADDR(GSIM_UCLK, 0x0318),
+ MFP_ADDR(GSIM_UDET, 0x031c),
+ MFP_ADDR(GSIM_nURST, 0x0320),
+
+ MFP_ADDR(PMIC_INT, 0x06c8),
+
+ MFP_ADDR(RDY, 0x0200),
+
+ MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+ if (cpu_is_pxa930()) {
+ pxa3xx_init_mfp();
+ pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+ }
+
+ return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 00000000000..9d39dea57ce
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,96 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+ int rc;
+
+ rc = gpio_request(gpio, "reset generator");
+ if (rc) {
+ printk(KERN_ERR "Can't request reset_gpio\n");
+ goto out;
+ }
+
+ rc = gpio_direction_input(gpio);
+ if (rc) {
+ printk(KERN_ERR "Can't configure reset_gpio for input\n");
+ gpio_free(gpio);
+ goto out;
+ }
+
+out:
+ if (!rc)
+ reset_gpio = gpio;
+
+ return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+ BUG_ON(reset_gpio == -1);
+
+ /* drive it low */
+ gpio_direction_output(reset_gpio, 0);
+ mdelay(2);
+ /* rising edge or drive high */
+ gpio_set_value(reset_gpio, 1);
+ mdelay(2);
+ /* falling edge */
+ gpio_set_value(reset_gpio, 0);
+
+ /* give it some time */
+ mdelay(10);
+
+ WARN_ON(1);
+ /* fallback */
+ do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+ /* Initialize the watchdog and let it fire */
+ OWER = OWER_WME;
+ OSSR = OSSR_M3;
+ OSMR3 = OSCR + 368640; /* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+ if (cpu_is_pxa2xx())
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+ switch (mode) {
+ case 's':
+ /* Jump into ROM at address 0 */
+ cpu_reset(0);
+ break;
+ case 'h':
+ do_hw_reset();
+ break;
+ case 'g':
+ do_gpio_reset();
+ break;
+ }
+}
+
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 00000000000..d02bc6f8bb9
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/arm/mach-pxa/saar.c
+ *
+ * Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+ /* Ethernet */
+ DF_nCS1_nCS3,
+ GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS (0x14000000)
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (SAAR_ETH_PHYS + 0x300),
+ .end = (SAAR_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &saar_smc91x_info,
+ },
+};
+
+static void __init saar_init(void)
+{
+ /* initialize MFP configurations */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+ platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+ /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = saar_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd9b43..762249c03de 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -38,6 +38,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
@@ -450,6 +451,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode)
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
else
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+ pxa2xx_transceiver_mode(dev, mode);
}
#ifdef CONFIG_MACH_AKITA
@@ -459,6 +461,7 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
else
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+ pxa2xx_transceiver_mode(dev, mode);
}
#endif
@@ -529,11 +532,7 @@ static struct platform_device *devices[] __initdata = {
static void spitz_poweroff(void)
{
- pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
- GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
- mdelay(1000);
- arm_machine_restart('h');
+ arm_machine_restart('g');
}
static void spitz_restart(char mode)
@@ -547,6 +546,7 @@ static void spitz_restart(char mode)
static void __init common_init(void)
{
+ init_gpio_reset(SPITZ_GPIO_ON_RESET);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 0bb31982fb6..89f38683787 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
* IO-based SSP applications and allows easy port setup for DMA access.
*
* Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- * Revision history:
- * 22nd Aug 2003 Initial version.
- * 20th Dec 2004 Added ssp_config for changing port config without
- * closing the port.
- * 4th Aug 2005 Added option to disable irq handler registration and
- * cleaned up irq and clock detection.
*/
#include <linux/module.h>
@@ -285,7 +278,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
goto out_region;
dev->irq = ssp->irq;
} else
- dev->irq = 0;
+ dev->irq = NO_IRQ;
/* turn on SSP port clock */
clk_enable(ssp->clk);
@@ -306,7 +299,8 @@ void ssp_exit(struct ssp_dev *dev)
struct ssp_device *ssp = dev->ssp;
ssp_disable(dev);
- free_irq(dev->irq, dev);
+ if (dev->irq != NO_IRQ)
+ free_irq(dev->irq, dev);
clk_disable(ssp->clk);
ssp_free(ssp);
}
@@ -360,6 +354,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
dev_err(&pdev->dev, "failed to allocate memory");
return -ENOMEM;
}
+ ssp->pdev = pdev;
ssp->clk = clk_get(&pdev->dev, "SSPCLK");
if (IS_ERR(ssp->clk)) {
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 00000000000..ac283507e42
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ * Support for the Marvell PXA930 Evaluation Board
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+ /* Ethernet */
+ DF_nCS1_nCS3,
+ GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS (0x14000000)
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (TAVOREVB_ETH_PHYS + 0x300),
+ .end = (TAVOREVB_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &tavorevb_smc91x_info,
+ },
+};
+
+static void __init tavorevb_init(void)
+{
+ /* initialize MFP configurations */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+ platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+ /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 00000000000..7d8505466e5
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <asm/arch/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+ gpio_set_value(data->gpio_reset, 0);
+ gpio_set_value(data->gpio_pwr, 1);
+ gpio_set_value(data->gpio_reset, 1);
+ mdelay(20);
+ gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+ gpio_set_value(data->gpio_reset, 1);
+ mdelay(10);
+ gpio_set_value(data->gpio_pwr, 0);
+ gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+ pr_info("BT_RADIO going: %s\n",
+ state == RFKILL_STATE_ON ? "on" : "off");
+
+ if (state == RFKILL_STATE_ON) {
+ pr_info("TOSA_BT: going ON\n");
+ tosa_bt_on(data);
+ } else {
+ pr_info("TOSA_BT: going OFF\n");
+ tosa_bt_off(data);
+ }
+ return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+ int rc;
+ struct rfkill *rfk;
+
+ struct tosa_bt_data *data = dev->dev.platform_data;
+
+ rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+ if (rc)
+ goto err_reset;
+ rc = gpio_direction_output(data->gpio_reset, 0);
+ if (rc)
+ goto err_reset_dir;
+ rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+ if (rc)
+ goto err_pwr;
+ rc = gpio_direction_output(data->gpio_pwr, 0);
+ if (rc)
+ goto err_pwr_dir;
+
+ rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+ if (!rfk) {
+ rc = -ENOMEM;
+ goto err_rfk_alloc;
+ }
+
+ rfk->name = "tosa-bt";
+ rfk->toggle_radio = tosa_bt_toggle_radio;
+ rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+ rfk->led_trigger.name = "tosa-bt";
+#endif
+
+ rc = rfkill_register(rfk);
+ if (rc)
+ goto err_rfkill;
+
+ platform_set_drvdata(dev, rfk);
+
+ return 0;
+
+err_rfkill:
+ if (rfk)
+ rfkill_free(rfk);
+ rfk = NULL;
+err_rfk_alloc:
+ tosa_bt_off(data);
+err_pwr_dir:
+ gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+ gpio_free(data->gpio_reset);
+err_reset:
+ return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+ struct tosa_bt_data *data = dev->dev.platform_data;
+ struct rfkill *rfk = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ if (rfk)
+ rfkill_unregister(rfk);
+ rfk = NULL;
+
+ tosa_bt_off(data);
+
+ gpio_free(data->gpio_pwr);
+ gpio_free(data->gpio_reset);
+
+ return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+ .probe = tosa_bt_probe,
+ .remove = __devexit_p(tosa_bt_remove),
+
+ .driver = {
+ .name = "tosa-bt",
+ .owner = THIS_MODULE,
+ },
+};
+
+
+static int __init tosa_bt_init(void)
+{
+ return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+ platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f57991..fea17ce6b55 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,30 +18,31 @@
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
#include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
#include <linux/pm.h>
-#include <linux/delay.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
#include <asm/setup.h>
-#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/mfp-pxa25x.h>
#include <asm/arch/irda.h>
#include <asm/arch/i2c.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
+#include <asm/arch/tosa_bt.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
#include <asm/arch/tosa.h>
#include <asm/hardware/scoop.h>
@@ -86,7 +87,7 @@ static unsigned long tosa_pin_config[] = {
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
GPIO9_GPIO, /* Detect */
- // GPIO10 nSD_INT
+ GPIO10_GPIO, /* nSD_INT */
/* CF */
GPIO13_GPIO, /* CD_IRQ */
@@ -124,34 +125,34 @@ static unsigned long tosa_pin_config[] = {
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
- /* IrDA */
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-
/* Keybd */
- GPIO58_GPIO,
- GPIO59_GPIO,
- GPIO60_GPIO,
- GPIO61_GPIO,
- GPIO62_GPIO,
- GPIO63_GPIO,
- GPIO64_GPIO,
- GPIO65_GPIO,
- GPIO66_GPIO,
- GPIO67_GPIO,
- GPIO68_GPIO,
- GPIO69_GPIO,
- GPIO70_GPIO,
- GPIO71_GPIO,
- GPIO72_GPIO,
- GPIO73_GPIO,
- GPIO74_GPIO,
- GPIO75_GPIO,
+ GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
/* SPI */
GPIO81_SSP2_CLK_OUT,
GPIO82_SSP2_FRM_OUT,
GPIO83_SSP2_TXD,
+
+ /* IrDA is managed in other way */
+ GPIO46_GPIO,
+ GPIO47_GPIO,
};
/*
@@ -249,6 +250,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+ err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+ if (err) {
+ printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+ goto err_gpio_detect;
+ }
+ err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+ if (err)
+ goto err_gpio_detect_dir;
+
err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC/SD card detect", data);
@@ -257,7 +267,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
goto err_irq;
}
- err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+ err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
if (err) {
printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
goto err_gpio_wp;
@@ -266,7 +276,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
if (err)
goto err_gpio_wp_dir;
- err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+ err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
if (err) {
printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
goto err_gpio_pwr;
@@ -275,8 +285,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
if (err)
goto err_gpio_pwr_dir;
+ err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+ if (err) {
+ printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+ goto err_gpio_int;
+ }
+ err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+ if (err)
+ goto err_gpio_int_dir;
+
return 0;
+err_gpio_int_dir:
+ gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
err_gpio_pwr_dir:
gpio_free(TOSA_GPIO_PWR_ON);
err_gpio_pwr:
@@ -285,6 +307,9 @@ err_gpio_wp_dir:
err_gpio_wp:
free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
err_irq:
+err_gpio_detect_dir:
+ gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
return err;
}
@@ -306,9 +331,11 @@ static int tosa_mci_get_ro(struct device *dev)
static void tosa_mci_exit(struct device *dev, void *data)
{
+ gpio_free(TOSA_GPIO_nSD_INT);
gpio_free(TOSA_GPIO_PWR_ON);
gpio_free(TOSA_GPIO_SD_WP);
free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+ gpio_free(TOSA_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +349,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
/*
* Irda
*/
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF) {
+ gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+ pxa2xx_transceiver_mode(dev, mode);
+ gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+ } else {
+ pxa2xx_transceiver_mode(dev, mode);
+ gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+ }
+}
+
static int tosa_irda_startup(struct device *dev)
{
int ret;
+ ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+ if (ret)
+ goto err_tx;
+ ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+ if (ret)
+ goto err_tx_dir;
+
ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
if (ret)
- return ret;
+ goto err_pwr;
ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
if (ret)
- gpio_free(TOSA_GPIO_IR_POWERDWN);
+ goto err_pwr_dir;
- return ret;
- }
+ tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-static void tosa_irda_shutdown(struct device *dev)
-{
+ return 0;
+
+err_pwr_dir:
gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+ gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+ return ret;
}
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
{
- gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+ tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+ gpio_free(TOSA_GPIO_IR_POWERDWN);
+ gpio_free(TOSA_GPIO_IRDA_TX);
}
static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +408,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
};
/*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+ int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+ if (ret)
+ goto err_gpio_req;
+
+ ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+ if (ret)
+ goto err_gpio_in;
+
+ return 0;
+
+err_gpio_in:
+ gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+ return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+ gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+ return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+ "main-battery",
+ "backup-battery",
+ "jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+ .init = tosa_power_init,
+ .is_ac_online = tosa_power_ac_online,
+ .exit = tosa_power_exit,
+ .supplied_to = tosa_ac_supplied_to,
+ .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+ {
+ .name = "ac",
+ .start = gpio_to_irq(TOSA_GPIO_AC_IN),
+ .end = gpio_to_irq(TOSA_GPIO_AC_IN),
+ .flags = IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device tosa_power_device = {
+ .name = "pda-power",
+ .id = -1,
+ .dev.platform_data = &tosa_power_data,
+ .resource = tosa_power_resource,
+ .num_resources = ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
* Tosa Keyboard
*/
static struct platform_device tosakbd_device = {
@@ -439,7 +556,7 @@ static struct gpio_led tosa_gpio_leds[] = {
},
{
.name = "tosa:blue:bluetooth",
- .default_trigger = "none",
+ .default_trigger = "tosa-bt",
.gpio = TOSA_GPIO_BT_LED,
},
};
@@ -457,21 +574,184 @@ static struct platform_device tosaled_device = {
},
};
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+ [0] = {
+ .start = TOSA_LCDC_PHYS,
+ .end = TOSA_LCDC_PHYS + 0x3ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .start = TOSA_IRQ_GPIO_TC6393XB_INT,
+ .end = TOSA_IRQ_GPIO_TC6393XB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+ int rc;
+
+ rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+ if (rc)
+ goto err_req_pclr;
+ rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+ if (rc)
+ goto err_req_suspend;
+ rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+ if (rc)
+ goto err_req_l3v;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+ if (rc)
+ goto err_dir_l3v;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+ if (rc)
+ goto err_dir_suspend;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+ if (rc)
+ goto err_dir_pclr;
+
+ mdelay(1);
+
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+ mdelay(10);
+
+ gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+ return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+ gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+ gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+ gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+ return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+ gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+ gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+ gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+ return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+ mdelay(10);
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+ mdelay(10);
+
+ return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+ return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+ {
+ .name = "smf",
+ .offset = 0,
+ .size = 7 * 1024 * 1024,
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 28 * 1024 * 1024,
+ },
+ {
+ .name = "home",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+ .num_partitions = ARRAY_SIZE(tosa_nand_partition),
+ .partition = tosa_nand_partition,
+ .badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0x3300,
+ .scr_gpo_dsr =
+ TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+ .scr_gpo_doecr =
+ TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+ .irq_base = IRQ_BOARD_START,
+ .gpio_base = TOSA_TC6393XB_GPIO_BASE,
+
+ .enable = tosa_tc6393xb_enable,
+ .disable = tosa_tc6393xb_disable,
+ .suspend = tosa_tc6393xb_suspend,
+ .resume = tosa_tc6393xb_resume,
+
+ .nand_data = &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_tc6393xb_setup,
+ },
+ .num_resources = ARRAY_SIZE(tc6393xb_resources),
+ .resource = tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+ .gpio_pwr = TOSA_GPIO_BT_PWR_EN,
+ .gpio_reset = TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+ .name = "tosa-bt",
+ .id = -1,
+ .dev.platform_data = &tosa_bt_data,
+};
+
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
+ &tc6393xb_device,
+ &tosa_power_device,
&tosakbd_device,
&tosa_gpio_keys_device,
&tosaled_device,
+ &tosa_bt_device,
};
static void tosa_poweroff(void)
{
- gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
- gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
- mdelay(1000);
- arm_machine_restart('h');
+ arm_machine_restart('g');
}
static void tosa_restart(char mode)
@@ -485,10 +765,14 @@ static void tosa_restart(char mode)
static void __init tosa_init(void)
{
+ int dummy;
+
pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
+ init_gpio_reset(TOSA_GPIO_ON_RESET);
+
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;
@@ -497,6 +781,10 @@ static void __init tosa_init(void)
/* enable batt_fault */
PMCR = 0x01;
+ dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+ dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+ dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 61e24402308..dee7bf36f01 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -254,6 +254,7 @@ static void board_irda_mode(struct device *dev, int mode)
/* Fast mode */
trizeps_conxs_ircr |= ConXS_IRCR_MODE;
}
+ pxa2xx_transceiver_mode(dev, mode);
if (mode & IR_OFF) {
trizeps_conxs_ircr |= ConXS_IRCR_SD;
} else {
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 66b446ca273..8fca6d890b7 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -29,6 +30,7 @@
#include <asm/arch/zylonite.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
@@ -37,6 +39,8 @@
struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
int wm9713_irq;
@@ -56,13 +60,57 @@ static struct resource smc91x_resources[] = {
}
};
+static struct smc91x_platdata zylonite_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+ SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
+ .dev = {
+ .platform_data = &zylonite_smc91x_info,
+ },
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+ [0] = {
+ .name = "zylonite:yellow:1",
+ .default_trigger = "heartbeat",
+ },
+ [1] = {
+ .name = "zylonite:yellow:2",
+ .default_trigger = "default-on",
+ },
};
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+ .leds = zylonite_debug_leds,
+ .num_leds = ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &zylonite_debug_leds_info,
+ }
+};
+
+static void __init zylonite_init_leds(void)
+{
+ zylonite_debug_leds[0].gpio = gpio_debug_led1;
+ zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+ platform_device_register(&zylonite_device_leds);
+}
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct platform_pwm_backlight_data zylonite_backlight_data = {
.pwm_id = 3,
@@ -259,7 +307,7 @@ static void __init zylonite_init_mmc(void)
static inline void zylonite_init_mmc(void) {}
#endif
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int zylonite_matrix_key_map[] = {
/* KEY(row, col, key_code) */
KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
@@ -324,6 +372,57 @@ static void __init zylonite_init_keypad(void)
static inline void zylonite_init_keypad(void) {}
#endif
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+ [0] = {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = 0x060000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [1] = {
+ .name = "Kernel",
+ .offset = 0x060000,
+ .size = 0x200000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [2] = {
+ .name = "Filesystem",
+ .offset = 0x0260000,
+ .size = 0x3000000, /* 48M - rootfs */
+ },
+ [3] = {
+ .name = "MassStorage",
+ .offset = 0x3260000,
+ .size = 0x3d40000,
+ },
+ [4] = {
+ .name = "BBT",
+ .offset = 0x6FA0000,
+ .size = 0x80000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* NOTE: we reserve some blocks at the end of the NAND flash for
+ * bad block management, and the max number of relocation blocks
+ * differs on different platforms. Please take care with it when
+ * defining the partition table.
+ */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+ .enable_arbiter = 1,
+ .parts = zylonite_nand_partitions,
+ .nr_parts = ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+ pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
static void __init zylonite_init(void)
{
/* board-processor specific initialization */
@@ -342,6 +441,8 @@ static void __init zylonite_init(void)
zylonite_init_lcd();
zylonite_init_mmc();
zylonite_init_keypad();
+ zylonite_init_nand();
+ zylonite_init_leds();
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 6f7ae972b8d..b28d46e081d 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,9 +16,12 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
#include <asm/gpio.h>
#include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/i2c.h>
#include <asm/arch/zylonite.h>
#include "generic.h"
@@ -109,6 +112,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO12_MMC2_DAT3,
GPIO13_MMC2_CLK,
GPIO14_MMC2_CMD,
+
+ /* Standard I2C */
+ GPIO21_I2C_SCL,
+ GPIO22_I2C_SDA,
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -192,6 +199,39 @@ static void __init zylonite_detect_lcd_panel(void)
pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
}
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+ [0] = {
+ .gpio_base = 128,
+ },
+ [1] = {
+ .gpio_base = 144,
+ },
+};
+
+struct i2c_board_info zylonite_i2c_board_info[] = {
+ {
+ .type = "pca9539",
+ .addr = 0x74,
+ .platform_data = &gpio_exp[0],
+ .irq = IRQ_GPIO(18),
+ }, {
+ .type = "pca9539",
+ .addr = 0x75,
+ .platform_data = &gpio_exp[1],
+ .irq = IRQ_GPIO(19),
+ },
+};
+
+static void __init zylonite_init_i2c(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
void __init zylonite_pxa300_init(void)
{
if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -207,6 +247,8 @@ void __init zylonite_pxa300_init(void)
/* WM9713 IRQ */
wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+ zylonite_init_i2c();
}
if (cpu_is_pxa300()) {
@@ -222,4 +264,8 @@ void __init zylonite_pxa300_init(void)
zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
}
+
+ /* GPIOs for Debug LEDs */
+ gpio_debug_led1 = EXT_GPIO(25);
+ gpio_debug_led2 = EXT_GPIO(26);
}
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b4fc34919a..2b7fba7a292 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -116,6 +116,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO27_MMC2_DAT3,
GPIO28_MMC2_CLK,
GPIO29_MMC2_CMD,
+
+ /* Debug LEDs */
+ GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+ GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
};
#define NUM_LCD_DETECT_PINS 7
@@ -189,6 +193,8 @@ void __init zylonite_pxa320_init(void)
/* GPIO pin assignment */
gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9);
+ gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2);
+ gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2);
/* MMC card detect & write protect for controller 0 */
zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1);
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index fc97fe57ee6..b5809c51d13 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
}
static struct clk clk_gpio27 = {
- .name = "GPIO27_CLK",
+ .name = "SA1111_CLK",
.rate = 3686400,
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index f64b92557b1..2e27a8c8372 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -76,3 +76,5 @@ obj-$(CONFIG_CPU_V7) += proc-v7.o
obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
+
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0be5630ff56..8b8f564c3aa 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Jul 7 16:25:39 2008
+# Last update: Sun Jul 13 12:04:05 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1812,3 +1812,11 @@ jade MACH_JADE JADE 1821
ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822
gprisc4 MACH_GPRISC4 GPRISC4 1823
stamp9260 MACH_STAMP9260 STAMP9260 1824
+smdk6430 MACH_SMDK6430 SMDK6430 1825
+smdkc100 MACH_SMDKC100 SMDKC100 1826
+tavorevb MACH_TAVOREVB TAVOREVB 1827
+saar MACH_SAAR SAAR 1828
+deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829
+at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
+linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
+hit_b0 MACH_HIT_B0 HIT_B0 1832