diff options
Diffstat (limited to 'arch/arm')
128 files changed, 5010 insertions, 1463 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 62152ae3475..7d0818797c8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -760,6 +760,7 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-dove/Kconfig" +source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c64xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2ddc323b1c6..8c0d08fbd99 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -179,9 +179,9 @@ plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa -plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c -plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c -plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c +plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung +plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung +plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx ifeq ($(CONFIG_ARCH_EBSA110),y) diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h index 1535540edc8..3fd889200e9 100644 --- a/arch/arm/mach-s3c2400/include/mach/map.h +++ b/arch/arm/mach-s3c2400/include/mach/map.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2400/include/mach/map.h * - * Copyright 2003,2007 Simtec Electronics + * Copyright 2003-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 3d4e9da3fa5..dd1fcc7e670 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -81,6 +81,14 @@ config ARCH_H1940 help Say Y here if you are using the HP IPAQ H1940 +config H1940BT + tristate "Control the state of H1940 bluetooth chip" + depends on ARCH_H1940 + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on h1940. + config PM_H1940 bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 2ab5ba4b266..0d468e96e83 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o # Machine support obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_ARCH_H1940) += mach-h1940.o h1940-bluetooth.o +obj-$(CONFIG_ARCH_H1940) += mach-h1940.o +obj-$(CONFIG_H1940BT) += h1940-bluetooth.o obj-$(CONFIG_PM_H1940) += pm-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 9a37c87152b..217b102866d 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/bast-irq.c * - * Copyright (c) 2003,2005 Simtec Electronics + * Copyright 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -141,7 +141,7 @@ static __init int bast_irq_init(void) unsigned int i; if (machine_is_bast()) { - printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n"); + printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n"); /* zap all the IRQs */ diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index 9d1186877d0..75189df995a 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/cpu-freq.c * - * Copyright (c) 2006,2008 Simtec Electronics + * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 5aabf117cbb..b7d1f8d27bc 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -17,6 +17,7 @@ #include <linux/ctype.h> #include <linux/leds.h> #include <linux/gpio.h> +#include <linux/rfkill.h> #include <mach/regs-gpio.h> #include <mach/hardware.h> @@ -24,21 +25,10 @@ #define DRV_NAME "h1940-bt" -#ifdef CONFIG_LEDS_H1940 -DEFINE_LED_TRIGGER(bt_led_trigger); -#endif - -static int state; - /* Bluetooth control */ static void h1940bt_enable(int on) { if (on) { -#ifdef CONFIG_LEDS_H1940 - /* flashing Blue */ - led_trigger_event(bt_led_trigger, LED_HALF); -#endif - /* Power on the chip */ h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); /* Reset the chip */ @@ -46,48 +36,31 @@ static void h1940bt_enable(int on) s3c2410_gpio_setpin(S3C2410_GPH(1), 1); mdelay(10); s3c2410_gpio_setpin(S3C2410_GPH(1), 0); - - state = 1; } else { -#ifdef CONFIG_LEDS_H1940 - led_trigger_event(bt_led_trigger, 0); -#endif - s3c2410_gpio_setpin(S3C2410_GPH(1), 1); mdelay(10); s3c2410_gpio_setpin(S3C2410_GPH(1), 0); mdelay(10); h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); - - state = 0; } } -static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf) +static int h1940bt_set_block(void *data, bool blocked) { - return snprintf(buf, PAGE_SIZE, "%d\n", state); + h1940bt_enable(!blocked); + return 0; } -static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - int new_state; - char *endp; - - new_state = simple_strtoul(buf, &endp, 0); - if (*endp && !isspace(*endp)) - return -EINVAL; - - h1940bt_enable(new_state); - - return count; -} -static DEVICE_ATTR(enable, 0644, - h1940bt_show, - h1940bt_store); +static const struct rfkill_ops h1940bt_rfkill_ops = { + .set_block = h1940bt_set_block, +}; static int __init h1940bt_probe(struct platform_device *pdev) { + struct rfkill *rfk; + int ret = 0; + /* Configures BT serial port GPIOs */ s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); s3c2410_gpio_pullup(S3C2410_GPH(0), 1); @@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev) s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); s3c2410_gpio_pullup(S3C2410_GPH(3), 1); -#ifdef CONFIG_LEDS_H1940 - led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger); -#endif - /* disable BT by default */ - h1940bt_enable(0); + rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, + &h1940bt_rfkill_ops, NULL); + if (!rfk) { + ret = -ENOMEM; + goto err_rfk_alloc; + } + + rfkill_set_led_trigger_name(rfk, "h1940-bluetooth"); + + ret = rfkill_register(rfk); + if (ret) + goto err_rfkill; + + platform_set_drvdata(pdev, rfk); + + return 0; - return device_create_file(&pdev->dev, &dev_attr_enable); +err_rfkill: + rfkill_destroy(rfk); +err_rfk_alloc: + return ret; } static int h1940bt_remove(struct platform_device *pdev) { -#ifdef CONFIG_LEDS_H1940 - led_trigger_unregister_simple(bt_led_trigger); -#endif + struct rfkill *rfk = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (rfk) { + rfkill_unregister(rfk); + rfkill_destroy(rfk); + } + rfk = NULL; + + h1940bt_enable(0); + return 0; } diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h index 20493b04836..bee2a7a932a 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h +++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/bast-cpld.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * BAST - CPLD control constants diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h index 501c202b53c..cac428c42e7 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h +++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/bast-irq.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Machine BAST - IRQ Number definitions diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h index c2c5baf0734..6e7dc9d0cf0 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-map.h +++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/bast-map.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Machine BAST - Memory map definitions diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h index 61684cb8ce5..4c38b39b741 100644 --- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h +++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/bast-pmu.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * Vincent Sanders <vince@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index 92e2687009e..08ac5f96c01 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/dma.h * - * Copyright (C) 2003,2004,2006 Simtec Electronics + * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Samsung S3C24XX DMA support diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index 801dff13858..035a493952d 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h * - * Copyright (c) 2003,2009 Simtec Electronics + * Copyright (c) 2003-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 - hardware diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h index 639eff523d4..17380f84842 100644 --- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h +++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/osiris-map.h * - * (c) 2005 Simtec Electronics + * Copyright 2005 Simtec Electronics * http://www.simtec.co.uk/products/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h index 2a5d90e957f..9a0d169be13 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h @@ -1,7 +1,7 @@ /* arch/arm/mach-s3c2410/include/mach/regs-clock.h * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ + * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index f6e8eec879c..ebc85c6dadb 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -1,7 +1,7 @@ /* arch/arm/mach-s3c2410/include/mach/regs-gpio.h * - * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ + * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h index 2d36353f57d..4932b87bdf3 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-power.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h @@ -1,7 +1,7 @@ /* arch/arm/mach-s3c2410/include/mach/regs-power.h * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ + * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h index c9432103750..72f756c5e50 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -1,7 +1,6 @@ - /* arch/arm/mach-s3c2410/include/mach/uncompress.h * - * Copyright (c) 2003, 2007 Simtec Electronics + * Copyright (c) 2003-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h index f53f85b4ad8..47add133b8e 100644 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h +++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Machine VR1000 - IRQ Number definitions diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 647c9adb018..4c79ac8a6c3 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/mach-bast.c * - * Copyright (c) 2003-2005,2008 Simtec Electronics + * Copyright 2003-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -61,11 +61,12 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> +#include <plat/audio-simtec.h> #include "usb-simtec.h" #include "nor-simtec.h" -#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" +#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" /* macros for virtual address mods for the io space entries */ #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) @@ -247,7 +248,7 @@ static int chip0_map[] = { 1 }; static int chip1_map[] = { 2 }; static int chip2_map[] = { 3 }; -static struct mtd_partition bast_default_nand_part[] = { +static struct mtd_partition __initdata bast_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -273,7 +274,7 @@ static struct mtd_partition bast_default_nand_part[] = { * socket. */ -static struct s3c2410_nand_set bast_nand_sets[] = { +static struct s3c2410_nand_set __initdata bast_nand_sets[] = { [0] = { .name = "SmartMedia", .nr_chips = 1, @@ -323,7 +324,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot) __raw_writeb(tmp, BAST_VA_CTRL2); } -static struct s3c2410_platform_nand bast_nand_info = { +static struct s3c2410_platform_nand __initdata bast_nand_info = { .tacls = 30, .twrph0 = 60, .twrph1 = 60, @@ -608,6 +609,11 @@ static struct s3c_cpufreq_board __initdata bast_cpufreq = { .need_io = 1, }; +static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { + .have_mic = 1, + .have_lout = 1, +}; + static void __init bast_map_io(void) { /* initialise the clocks */ @@ -625,7 +631,6 @@ static void __init bast_map_io(void) s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_device_nand.dev.platform_data = &bast_nand_info; s3c_device_hwmon.dev.platform_data = &bast_hwmon_info; s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); @@ -639,6 +644,7 @@ static void __init bast_init(void) sysdev_register(&bast_pm_sysdev); s3c_i2c0_set_platdata(&bast_i2c_info); + s3c_nand_set_platdata(&bast_nand_info); s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); @@ -647,6 +653,7 @@ static void __init bast_init(void) usb_simtec_init(); nor_simtec_init(); + simtec_audio_add(NULL, true, &bast_audio); s3c_cpufreq_setboard(&bast_cpufreq); } diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index d9cd5ddecf4..49053254c98 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -21,6 +21,11 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio.h> +#include <linux/pwm_backlight.h> +#include <video/platform_lcd.h> + +#include <linux/mmc/host.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,9 +37,12 @@ #include <plat/regs-serial.h> #include <mach/regs-lcd.h> -#include <mach/regs-gpio.h> #include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <mach/gpio-fns.h> +#include <mach/gpio-nrs.h> + #include <mach/h1940.h> #include <mach/h1940-latch.h> #include <mach/fb.h> @@ -46,6 +54,7 @@ #include <plat/cpu.h> #include <plat/pll.h> #include <plat/pm.h> +#include <plat/mci.h> static struct map_desc h1940_iodesc[] __initdata = { [0] = { @@ -171,16 +180,90 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = { .gpdup_mask= 0xffffffff, }; -static struct platform_device s3c_device_leds = { +static struct platform_device h1940_device_leds = { .name = "h1940-leds", .id = -1, }; -static struct platform_device s3c_device_bluetooth = { +static struct platform_device h1940_device_bluetooth = { .name = "h1940-bt", .id = -1, }; +static struct s3c24xx_mci_pdata h1940_mmc_cfg = { + .gpio_detect = S3C2410_GPF(5), + .gpio_wprotect = S3C2410_GPH(8), + .set_power = NULL, + .ocr_avail = MMC_VDD_32_33, +}; + +static int h1940_backlight_init(struct device *dev) +{ + gpio_request(S3C2410_GPB(0), "Backlight"); + + s3c2410_gpio_setpin(S3C2410_GPB(0), 0); + s3c2410_gpio_pullup(S3C2410_GPB(0), 0); + s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + + return 0; +} + +static void h1940_backlight_exit(struct device *dev) +{ + s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/); +} + +static struct platform_pwm_backlight_data backlight_data = { + .pwm_id = 0, + .max_brightness = 100, + .dft_brightness = 50, + /* tcnt = 0x31 */ + .pwm_period_ns = 36296, + .init = h1940_backlight_init, + .exit = h1940_backlight_exit, +}; + +static struct platform_device h1940_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &backlight_data, + }, + .id = -1, +}; + +static void h1940_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + int value; + + if (!power) { + /* set to 3ec */ + s3c2410_gpio_setpin(S3C2410_GPC(0), 0); + /* wait for 3ac */ + do { + value = s3c2410_gpio_getpin(S3C2410_GPC(6)); + } while (value); + /* set to 38c */ + s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + } else { + /* Set to 3ac */ + s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + /* Set to 3ad */ + s3c2410_gpio_setpin(S3C2410_GPC(0), 1); + } +} + +static struct plat_lcd_data h1940_lcd_power_data = { + .set_power = h1940_lcd_power_set, +}; + +static struct platform_device h1940_lcd_powerdev = { + .name = "platform-lcd", + .dev.parent = &s3c_device_lcd.dev, + .dev.platform_data = &h1940_lcd_power_data, +}; + static struct platform_device *h1940_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, @@ -188,8 +271,13 @@ static struct platform_device *h1940_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, - &s3c_device_leds, - &s3c_device_bluetooth, + &h1940_device_leds, + &h1940_device_bluetooth, + &s3c_device_sdi, + &s3c_device_rtc, + &s3c_device_timer[0], + &h1940_backlight, + &h1940_lcd_powerdev, }; static void __init h1940_map_io(void) @@ -219,6 +307,8 @@ static void __init h1940_init(void) s3c24xx_udc_set_platdata(&h1940_udc_cfg); s3c_i2c0_set_platdata(NULL); + s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg; + /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -231,6 +321,11 @@ static void __init h1940_init(void) | (0x03 << S3C24XX_PLLCON_SDIVSHIFT); writel(tmp, S3C2410_UPLLCON); + gpio_request(S3C2410_GPC(0), "LCD power"); + gpio_request(S3C2410_GPC(5), "LCD power"); + gpio_request(S3C2410_GPC(6), "LCD power"); + + platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 0f6ed61af41..0405712c226 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -338,7 +338,7 @@ static struct platform_device *n35_devices[] __initdata = { &n35_button_device, }; -static struct s3c2410_platform_i2c n30_i2ccfg = { +static struct s3c2410_platform_i2c __initdata n30_i2ccfg = { .flags = 0, .slave_addr = 0x10, .frequency = 10*1000, @@ -500,8 +500,8 @@ static void __init n30_init_irq(void) static void __init n30_init(void) { s3c24xx_fb_set_platdata(&n30_fb_info); - s3c_device_i2c0.dev.platform_data = &n30_i2ccfg; s3c24xx_udc_set_platdata(&n30_udc_cfg); + s3c_i2c0_set_platdata(&n30_i2ccfg); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 2cc9849eb44..ab092bcda39 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -258,7 +258,7 @@ static struct platform_device *qt2410_devices[] __initdata = { &qt2410_led, }; -static struct mtd_partition qt2410_nand_part[] = { +static struct mtd_partition __initdata qt2410_nand_part[] = { [0] = { .name = "U-Boot", .size = 0x30000, @@ -286,7 +286,7 @@ static struct mtd_partition qt2410_nand_part[] = { }, }; -static struct s3c2410_nand_set qt2410_nand_sets[] = { +static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = { [0] = { .name = "NAND", .nr_chips = 1, @@ -299,7 +299,7 @@ static struct s3c2410_nand_set qt2410_nand_sets[] = { * chips and beyond. */ -static struct s3c2410_platform_nand qt2410_nand_info = { +static struct s3c2410_platform_nand __initdata qt2410_nand_info = { .tacls = 20, .twrph0 = 60, .twrph1 = 20, @@ -331,7 +331,7 @@ static void __init qt2410_map_io(void) static void __init qt2410_machine_init(void) { - s3c_device_nand.dev.platform_data = &qt2410_nand_info; + s3c_nand_set_platdata(&qt2410_nand_info); switch (tft_type) { case 'p': /* production */ diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 1628cc773a2..0d61fb57717 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/mach-vr1000.c * - * Copyright (c) 2003-2005,2008 Simtec Electronics + * Copyright (c) 2003-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Machine support for Thorcom VR1000 board. Designed for Thorcom by @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> +#include <plat/audio-simtec.h> #include "usb-simtec.h" #include "nor-simtec.h" @@ -393,6 +394,7 @@ static void __init vr1000_init(void) ARRAY_SIZE(vr1000_i2c_devs)); nor_simtec_init(); + simtec_audio_add(NULL, true, NULL); } MACHINE_START(VR1000, "Thorcom-VR1000") diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c index f178c2fd9d8..8338865e11c 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c2410/pll.c @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/pll.c * - * Copyright (c) 2006,2007 Simtec Electronics + * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * Vincent Sanders <vince@arm.linux.org.uk> diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 50e25fc5f8a..6b9d0d83a6f 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/usb-simtec.c * - * Copyright (c) 2004,2005 Simtec Electronics + * Copyright 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -108,7 +108,7 @@ int usb_simtec_init(void) { int ret; - printk("USB Power Control, (c) 2004 Simtec Electronics\n"); + printk("USB Power Control, Copyright 2004 Simtec Electronics\n"); ret = gpio_request(S3C2410_GPB(4), "USB power control"); if (ret < 0) { diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 8df506eac90..c9fa3fca486 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -96,7 +96,7 @@ static struct s3c2410_uartcfg jive_uartcfgs[] = { * 0x017d0000-0x02bd0000 : cramfs B * 0x02bd0000-0x03fd0000 : yaffs */ -static struct mtd_partition jive_imageA_nand_part[] = { +static struct mtd_partition __initdata jive_imageA_nand_part[] = { #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER /* Don't allow access to the bootloader from linux */ @@ -154,7 +154,7 @@ static struct mtd_partition jive_imageA_nand_part[] = { }, }; -static struct mtd_partition jive_imageB_nand_part[] = { +static struct mtd_partition __initdata jive_imageB_nand_part[] = { #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER /* Don't allow access to the bootloader from linux */ @@ -213,7 +213,7 @@ static struct mtd_partition jive_imageB_nand_part[] = { }, }; -static struct s3c2410_nand_set jive_nand_sets[] = { +static struct s3c2410_nand_set __initdata jive_nand_sets[] = { [0] = { .name = "flash", .nr_chips = 1, @@ -222,7 +222,7 @@ static struct s3c2410_nand_set jive_nand_sets[] = { }, }; -static struct s3c2410_platform_nand jive_nand_info = { +static struct s3c2410_platform_nand __initdata jive_nand_info = { /* set taken from osiris nand timings, possibly still conservative */ .tacls = 30, .twrph0 = 55, @@ -631,7 +631,8 @@ static void __init jive_machine_init(void) s3c_pm_init(); - s3c_device_nand.dev.platform_data = &jive_nand_info; + /** TODO - check that this is after the cmdline option! */ + s3c_nand_set_platdata(&jive_nand_info); /* initialise the spi */ diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 11e8ad49fc7..a6ba591b26b 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -76,7 +76,7 @@ static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = { } }; -static struct mtd_partition vstms_nand_part[] = { +static struct mtd_partition __initdata vstms_nand_part[] = { [0] = { .name = "Boot Agent", .size = 0x7C000, @@ -99,7 +99,7 @@ static struct mtd_partition vstms_nand_part[] = { }, }; -static struct s3c2410_nand_set vstms_nand_sets[] = { +static struct s3c2410_nand_set __initdata vstms_nand_sets[] = { [0] = { .name = "NAND", .nr_chips = 1, @@ -112,7 +112,7 @@ static struct s3c2410_nand_set vstms_nand_sets[] = { * chips and beyond. */ -static struct s3c2410_platform_nand vstms_nand_info = { +static struct s3c2410_platform_nand __initdata vstms_nand_info = { .tacls = 20, .twrph0 = 60, .twrph1 = 20, @@ -143,8 +143,6 @@ static void __init vstms_fixup(struct machine_desc *desc, static void __init vstms_map_io(void) { - s3c_device_nand.dev.platform_data = &vstms_nand_info; - s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); @@ -153,6 +151,8 @@ static void __init vstms_map_io(void) static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&vstms_nand_info); + platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); } diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index a8b69d77571..cf10e14b7b4 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -53,6 +53,19 @@ config MACH_OSIRIS Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. +config MACH_OSIRIS_DVS + tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" + depends on MACH_OSIRIS + select TPS65010 + help + Say Y/M here if you want to have dynamic voltage scaling support + on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. + + The DVS driver alters the voltage supplied to the ARM core + depending on the frequency it is running at. The driver itself + does not do any of the frequency alteration, which is left up + to the cpufreq driver. + config MACH_RX3715 bool "HP iPAQ rx3715" select CPU_S3C2440 diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index bfadcf684a2..5f322453188 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -23,3 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o + +# extra machine support + +obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 63c5ab65727..0c049b95c37 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 68f3870991b..62a4c3eba97 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/mach-anubis.c * - * Copyright (c) 2003-2005,2008 Simtec Electronics + * Copyright 2003-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * @@ -53,8 +53,9 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/audio-simtec.h> -#define COPYRIGHT ", (c) 2005 Simtec Electronics" +#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" static struct map_desc anubis_iodesc[] __initdata = { /* ISA IO areas */ @@ -138,7 +139,7 @@ static int external_map[] = { 2 }; static int chip0_map[] = { 0 }; static int chip1_map[] = { 1 }; -static struct mtd_partition anubis_default_nand_part[] = { +static struct mtd_partition __initdata anubis_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -161,7 +162,7 @@ static struct mtd_partition anubis_default_nand_part[] = { } }; -static struct mtd_partition anubis_default_nand_part_large[] = { +static struct mtd_partition __initdata anubis_default_nand_part_large[] = { [0] = { .name = "Boot Agent", .size = SZ_128K, @@ -191,7 +192,7 @@ static struct mtd_partition anubis_default_nand_part_large[] = { * socket. */ -static struct s3c2410_nand_set anubis_nand_sets[] = { +static struct s3c2410_nand_set __initdata anubis_nand_sets[] = { [1] = { .name = "External", .nr_chips = 1, @@ -233,7 +234,7 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) __raw_writeb(tmp, ANUBIS_VA_CTRL1); } -static struct s3c2410_platform_nand anubis_nand_info = { +static struct s3c2410_platform_nand __initdata anubis_nand_info = { .tacls = 25, .twrph0 = 55, .twrph1 = 40, @@ -437,6 +438,17 @@ static struct i2c_board_info anubis_i2c_devs[] __initdata = { } }; +/* Audio setup */ +static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { + .have_mic = 1, + .have_lout = 1, + .output_cdclk = 1, + .use_mpllin = 1, + .amp_gpio = S3C2410_GPB(2), + .amp_gain[0] = S3C2410_GPD(10), + .amp_gain[1] = S3C2410_GPD(11), +}; + static void __init anubis_map_io(void) { /* initialise the clocks */ @@ -454,8 +466,6 @@ static void __init anubis_map_io(void) s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - s3c_device_nand.dev.platform_data = &anubis_nand_info; - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); @@ -476,6 +486,9 @@ static void __init anubis_map_io(void) static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&anubis_nand_info); + simtec_audio_add(NULL, false, &anubis_audio); + platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); i2c_register_board_info(0, anubis_i2c_devs, diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index dfc7010935d..aa69290e04c 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -96,7 +96,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { /* NAND Flash on AT2440EVB board */ -static struct mtd_partition at2440evb_default_nand_part[] = { +static struct mtd_partition __initdata at2440evb_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_256K, @@ -114,7 +114,7 @@ static struct mtd_partition at2440evb_default_nand_part[] = { }, }; -static struct s3c2410_nand_set at2440evb_nand_sets[] = { +static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = { [0] = { .name = "nand", .nr_chips = 1, @@ -123,7 +123,7 @@ static struct s3c2410_nand_set at2440evb_nand_sets[] = { }, }; -static struct s3c2410_platform_nand at2440evb_nand_info = { +static struct s3c2410_platform_nand __initdata at2440evb_nand_info = { .tacls = 25, .twrph0 = 55, .twrph1 = 40, @@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { - s3c_device_nand.dev.platform_data = &at2440evb_nand_info; - s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata; s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); @@ -228,6 +226,7 @@ static void __init at2440evb_map_io(void) static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); + s3c_nand_set_platdata(&at2440evb_nand_info); s3c_i2c0_set_platdata(NULL); platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 1c3382fefdd..547d4fc9913 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -532,7 +532,6 @@ static void __init mini2440_map_io(void) s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); - s3c_device_nand.dev.platform_data = &mini2440_nand_info; s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg; } @@ -677,8 +676,11 @@ static void __init mini2440_init(void) printk("\n"); s3c24xx_fb_set_platdata(&mini2440_fb_info); } + s3c24xx_udc_set_platdata(&mini2440_udc_cfg); + s3c_nand_set_platdata(&mini2440_nand_info); s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, mini2440_i2c_devs, ARRAY_SIZE(mini2440_i2c_devs)); diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c new file mode 100644 index 00000000000..ad2792dfbee --- /dev/null +++ b/arch/arm/mach-s3c2440/mach-osiris-dvs.c @@ -0,0 +1,194 @@ +/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c + * + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * Simtec Osiris Dynamic Voltage Scaling support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/cpufreq.h> +#include <linux/gpio.h> + +#include <linux/i2c/tps65010.h> + +#include <plat/cpu-freq.h> + +#define OSIRIS_GPIO_DVS S3C2410_GPB(5) + +static bool dvs_en; + +static void osiris_dvs_tps_setdvs(bool on) +{ + unsigned vregs1 = 0, vdcdc2 = 0; + + if (!on) { + vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF; + vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */ + } + + dvs_en = on; + vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V; + vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE; + + tps65010_config_vregs1(vregs1); + tps65010_config_vdcdc2(vdcdc2); +} + +static bool is_dvs(struct s3c_freq *f) +{ + /* at the moment, we assume ARMCLK = HCLK => DVS */ + return f->armclk == f->hclk; +} + +/* keep track of current state */ +static bool cur_dvs = false; + +static int osiris_dvs_notify(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *cf = data; + struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf); + bool old_dvs = is_dvs(&freqs->old); + bool new_dvs = is_dvs(&freqs->new); + int ret = 0; + + if (!dvs_en) + return 0; + + printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__, + freqs->old.armclk, freqs->old.hclk, + freqs->new.armclk, freqs->new.hclk); + + switch (val) { + case CPUFREQ_PRECHANGE: + if (old_dvs & !new_dvs || + cur_dvs & !new_dvs) { + pr_debug("%s: exiting dvs\n", __func__); + cur_dvs = false; + gpio_set_value(OSIRIS_GPIO_DVS, 1); + } + break; + case CPUFREQ_POSTCHANGE: + if (!old_dvs & new_dvs || + !cur_dvs & new_dvs) { + pr_debug("entering dvs\n"); + cur_dvs = true; + gpio_set_value(OSIRIS_GPIO_DVS, 0); + } + break; + } + + return ret; +} + +static struct notifier_block osiris_dvs_nb = { + .notifier_call = osiris_dvs_notify, +}; + +static int __devinit osiris_dvs_probe(struct platform_device *pdev) +{ + int ret; + + dev_info(&pdev->dev, "initialising\n"); + + ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs"); + if (ret) { + dev_err(&pdev->dev, "cannot claim gpio\n"); + goto err_nogpio; + } + + /* start with dvs disabled */ + gpio_direction_output(OSIRIS_GPIO_DVS, 1); + + ret = cpufreq_register_notifier(&osiris_dvs_nb, + CPUFREQ_TRANSITION_NOTIFIER); + if (ret) { + dev_err(&pdev->dev, "failed to register with cpufreq\n"); + goto err_nofreq; + } + + osiris_dvs_tps_setdvs(true); + + return 0; + +err_nofreq: + gpio_free(OSIRIS_GPIO_DVS); + +err_nogpio: + return ret; +} + +static int __devexit osiris_dvs_remove(struct platform_device *pdev) +{ + dev_info(&pdev->dev, "exiting\n"); + + /* disable any current dvs */ + gpio_set_value(OSIRIS_GPIO_DVS, 1); + osiris_dvs_tps_setdvs(false); + + cpufreq_unregister_notifier(&osiris_dvs_nb, + CPUFREQ_TRANSITION_NOTIFIER); + + gpio_free(OSIRIS_GPIO_DVS); + + return 0; +} + +/* the CONFIG_PM block is so small, it isn't worth actaully compiling it + * out if the configuration isn't set. */ + +static int osiris_dvs_suspend(struct device *dev) +{ + gpio_set_value(OSIRIS_GPIO_DVS, 1); + osiris_dvs_tps_setdvs(false); + cur_dvs = false; + + return 0; +} + +static int osiris_dvs_resume(struct device *dev) +{ + osiris_dvs_tps_setdvs(true); + return 0; +} + +static const struct dev_pm_ops osiris_dvs_pm = { + .suspend = osiris_dvs_suspend, + .resume = osiris_dvs_resume, +}; + +static struct platform_driver osiris_dvs_driver = { + .probe = osiris_dvs_probe, + .remove = __devexit_p(osiris_dvs_remove), + .driver = { + .name = "osiris-dvs", + .owner = THIS_MODULE, + .pm = &osiris_dvs_pm, + }, +}; + +static int __init osiris_dvs_init(void) +{ + return platform_driver_register(&osiris_dvs_driver); +} + +static void __exit osiris_dvs_exit(void) +{ + platform_driver_unregister(&osiris_dvs_driver); +} + +module_init(osiris_dvs_init); +module_exit(osiris_dvs_exit); + +MODULE_DESCRIPTION("Simtec OSIRIS DVS support"); +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:osiris-dvs"); diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 2105a41281a..015dfb2a80d 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/mach-osiris.c * - * Copyright (c) 2005,2008 Simtec Electronics + * Copyright (c) 2005-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * @@ -23,6 +23,8 @@ #include <linux/i2c.h> #include <linux/io.h> +#include <linux/i2c/tps65010.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -148,7 +150,7 @@ static int external_map[] = { 2 }; static int chip0_map[] = { 0 }; static int chip1_map[] = { 1 }; -static struct mtd_partition osiris_default_nand_part[] = { +static struct mtd_partition __initdata osiris_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -171,7 +173,7 @@ static struct mtd_partition osiris_default_nand_part[] = { } }; -static struct mtd_partition osiris_default_nand_part_large[] = { +static struct mtd_partition __initdata osiris_default_nand_part_large[] = { [0] = { .name = "Boot Agent", .size = SZ_128K, @@ -201,7 +203,7 @@ static struct mtd_partition osiris_default_nand_part_large[] = { * socket. */ -static struct s3c2410_nand_set osiris_nand_sets[] = { +static struct s3c2410_nand_set __initdata osiris_nand_sets[] = { [1] = { .name = "External", .nr_chips = 1, @@ -243,7 +245,7 @@ static void osiris_nand_select(struct s3c2410_nand_set *set, int slot) __raw_writeb(tmp, OSIRIS_VA_CTRL0); } -static struct s3c2410_platform_nand osiris_nand_info = { +static struct s3c2410_platform_nand __initdata osiris_nand_info = { .tacls = 25, .twrph0 = 60, .twrph1 = 60, @@ -326,12 +328,44 @@ static struct sys_device osiris_pm_sysdev = { .cls = &osiris_pm_sysclass, }; +/* Link for DVS driver to TPS65011 */ + +static void osiris_tps_release(struct device *dev) +{ + /* static device, do not need to release anything */ +} + +static struct platform_device osiris_tps_device = { + .name = "osiris-dvs", + .id = -1, + .dev.release = osiris_tps_release, +}; + +static int osiris_tps_setup(struct i2c_client *client, void *context) +{ + osiris_tps_device.dev.parent = &client->dev; + return platform_device_register(&osiris_tps_device); +} + +static int osiris_tps_remove(struct i2c_client *client, void *context) +{ + platform_device_unregister(&osiris_tps_device); + return 0; +} + +static struct tps65010_board osiris_tps_board = { + .base = -1, /* GPIO can go anywhere at the moment */ + .setup = osiris_tps_setup, + .teardown = osiris_tps_remove, +}; + /* I2C devices fitted. */ static struct i2c_board_info osiris_i2c_devs[] __initdata = { { I2C_BOARD_INFO("tps65011", 0x48), .irq = IRQ_EINT20, + .platform_data = &osiris_tps_board, }, }; @@ -377,8 +411,6 @@ static void __init osiris_map_io(void) s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - s3c_device_nand.dev.platform_data = &osiris_nand_info; - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); @@ -408,6 +440,7 @@ static void __init osiris_init(void) sysdev_register(&osiris_pm_sysdev); s3c_i2c0_set_platdata(NULL); + s3c_nand_set_platdata(&osiris_nand_info); s3c_cpufreq_setboard(&osiris_cpufreq); diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index bc8d8d1ebd1..a952a13afb1 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/mach-rx3715.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.handhelds.org/projects/rx3715.html @@ -149,7 +149,7 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = { .gpdup_mask = 0xffffffff, }; -static struct mtd_partition rx3715_nand_part[] = { +static struct mtd_partition __initdata rx3715_nand_part[] = { [0] = { .name = "Whole Flash", .offset = 0, @@ -158,7 +158,7 @@ static struct mtd_partition rx3715_nand_part[] = { } }; -static struct s3c2410_nand_set rx3715_nand_sets[] = { +static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = { [0] = { .name = "Internal", .nr_chips = 1, @@ -167,7 +167,7 @@ static struct s3c2410_nand_set rx3715_nand_sets[] = { }, }; -static struct s3c2410_platform_nand rx3715_nand_info = { +static struct s3c2410_platform_nand __initdata rx3715_nand_info = { .tacls = 25, .twrph0 = 50, .twrph1 = 15, @@ -186,8 +186,6 @@ static struct platform_device *rx3715_devices[] __initdata = { static void __init rx3715_map_io(void) { - s3c_device_nand.dev.platform_data = &rx3715_nand_info; - s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); @@ -205,6 +203,7 @@ static void __init rx3715_init_machine(void) #endif s3c_pm_init(); + s3c_nand_set_platdata(&rx3715_nand_info); s3c24xx_fb_set_platdata(&rx3715_fb_info); platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); } diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index db6eafbd4d9..ec13e748ccc 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2440/mach-smdk2440.c * - * Copyright (c) 2004,2005 Simtec Electronics + * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.fluff.org/ben/smdk2440/ diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index 0fb385bd9cd..f76d6ff4aeb 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -423,7 +423,7 @@ static struct i2c_board_info gta02_i2c_devs[] __initdata = { }, }; -static struct s3c2410_nand_set gta02_nand_sets[] = { +static struct s3c2410_nand_set __initdata gta02_nand_sets[] = { [0] = { /* * This name is also hard-coded in the boot loaders, so @@ -442,7 +442,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = { * data sheet (K5D2G13ACM-D075 MCP Memory). */ -static struct s3c2410_platform_nand gta02_nand_info = { +static struct s3c2410_platform_nand __initdata gta02_nand_info = { .tacls = 0, .twrph0 = 25, .twrph1 = 15, @@ -621,9 +621,9 @@ static void __init gta02_machine_init(void) #endif s3c_device_usb.dev.platform_data = >a02_usb_info; - s3c_device_nand.dev.platform_data = >a02_nand_info; s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c_nand_set_platdata(>a02_nand_info); s3c_i2c0_set_platdata(NULL); i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h index 79e4d93ea2b..d88c8b24fe3 100644 --- a/arch/arm/mach-s3c24a0/include/mach/map.h +++ b/arch/arm/mach-s3c24a0/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c24a0/include/mach/map.h * - * Copyright 2003,2007 Simtec Electronics + * Copyright 2003-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h index af2abd756c3..be0af518b48 100644 --- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ + * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index fc8b223bad4..f3b48f841d8 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -64,6 +64,9 @@ #define S3C64XX_PA_USBHOST (0x74300000) +#define S3C64XX_PA_USB_HSPHY (0x7C100000) +#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) + /* place VICs close together */ #define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) #define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) @@ -79,5 +82,6 @@ #define S3C_PA_FB S3C64XX_PA_FB #define S3C_PA_USBHOST S3C64XX_PA_USBHOST #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG +#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY #endif /* __ASM_ARCH_6400_MAP_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h index 47019795ce0..f56611526c6 100644 --- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h +++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h @@ -1,195 +1,30 @@ -/* arch/arm/mach-s3c6400/include/mach/regs-fb.h - * +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - new-style framebuffer register definitions + * Copyright 2009 Samsung Electronics Co. * - * This is the register set for the new style framebuffer interface - * found from the S3C2443 onwards and specifically the S3C64XX series - * S3C6400 and S3C6410. + * Pawel Osciak <p.osciak@samsung.com> + * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk> * - * The file contains the cpu specific items which change between whichever - * architecture is selected. See <plat/regs-fb.h> for the core definitions - * that are the same. + * Framebuffer register definitions for Samsung S3C64xx. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/* include the core definitions here, in case we really do need to - * override them at a later date. -*/ - -#include <plat/regs-fb.h> - -#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */ -#define VIDCON1_FSTATUS_EVEN (1 << 15) - -/* Video timing controls */ -#define VIDTCON0 (0x10) -#define VIDTCON1 (0x14) -#define VIDTCON2 (0x18) - -/* Window position controls */ - -#define WINCON(_win) (0x20 + ((_win) * 4)) - -/* OSD1 and OSD4 do not have register D */ - -#define VIDOSD_A(_win) (0x40 + ((_win) * 16)) -#define VIDOSD_B(_win) (0x44 + ((_win) * 16)) -#define VIDOSD_C(_win) (0x48 + ((_win) * 16)) -#define VIDOSD_D(_win) (0x4C + ((_win) * 16)) - -/* Video buffer addresses */ - -#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) -#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) -#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) -#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) -#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) - -#define VIDINTCON0 (0x130) - -#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4)) - -/* WINCONx */ - -#define WINCONx_CSCWIDTH_MASK (0x3 << 26) -#define WINCONx_CSCWIDTH_SHIFT (26) -#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) -#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) - -#define WINCONx_ENLOCAL (1 << 22) -#define WINCONx_BUFSTATUS (1 << 21) -#define WINCONx_BUFSEL (1 << 20) -#define WINCONx_BUFAUTOEN (1 << 19) -#define WINCONx_YCbCr (1 << 13) - -#define WINCON1_LOCALSEL_CAMIF (1 << 23) - -#define WINCON2_LOCALSEL_CAMIF (1 << 23) -#define WINCON2_BLD_PIX (1 << 6) - -#define WINCON2_ALPHA_SEL (1 << 1) -#define WINCON2_BPPMODE_MASK (0xf << 2) -#define WINCON2_BPPMODE_SHIFT (2) -#define WINCON2_BPPMODE_1BPP (0x0 << 2) -#define WINCON2_BPPMODE_2BPP (0x1 << 2) -#define WINCON2_BPPMODE_4BPP (0x2 << 2) -#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2) -#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2) -#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2) -#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2) -#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2) -#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2) -#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2) -#define WINCON2_BPPMODE_24BPP_888 (0xb << 2) -#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2) -#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2) -#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2) - -#define WINCON3_BLD_PIX (1 << 6) - -#define WINCON3_ALPHA_SEL (1 << 1) -#define WINCON3_BPPMODE_MASK (0xf << 2) -#define WINCON3_BPPMODE_SHIFT (2) -#define WINCON3_BPPMODE_1BPP (0x0 << 2) -#define WINCON3_BPPMODE_2BPP (0x1 << 2) -#define WINCON3_BPPMODE_4BPP (0x2 << 2) -#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2) -#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2) -#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2) -#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2) -#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2) -#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2) -#define WINCON3_BPPMODE_24BPP_888 (0xb << 2) -#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2) -#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2) -#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2) - -#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) -#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) -#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) - -#define DITHMODE (0x170) -#define WINxMAP(_win) (0x180 + ((_win) * 4)) - - -#define DITHMODE_R_POS_MASK (0x3 << 5) -#define DITHMODE_R_POS_SHIFT (5) -#define DITHMODE_R_POS_8BIT (0x0 << 5) -#define DITHMODE_R_POS_6BIT (0x1 << 5) -#define DITHMODE_R_POS_5BIT (0x2 << 5) - -#define DITHMODE_G_POS_MASK (0x3 << 3) -#define DITHMODE_G_POS_SHIFT (3) -#define DITHMODE_G_POS_8BIT (0x0 << 3) -#define DITHMODE_G_POS_6BIT (0x1 << 3) -#define DITHMODE_G_POS_5BIT (0x2 << 3) - -#define DITHMODE_B_POS_MASK (0x3 << 1) -#define DITHMODE_B_POS_SHIFT (1) -#define DITHMODE_B_POS_8BIT (0x0 << 1) -#define DITHMODE_B_POS_6BIT (0x1 << 1) -#define DITHMODE_B_POS_5BIT (0x2 << 1) +#ifndef __ASM_ARCH_MACH_REGS_FB_H +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ -#define DITHMODE_DITH_EN (1 << 0) - -#define WPALCON (0x1A0) - -#define WPALCON_W4PAL_16BPP_A555 (1 << 8) -#define WPALCON_W3PAL_16BPP_A555 (1 << 7) -#define WPALCON_W2PAL_16BPP_A555 (1 << 6) +#include <plat/regs-fb-v4.h> /* Palette registers */ - #define WIN2_PAL(_entry) (0x300 + ((_entry) * 2)) #define WIN3_PAL(_entry) (0x320 + ((_entry) * 2)) #define WIN4_PAL(_entry) (0x340 + ((_entry) * 2)) #define WIN0_PAL(_entry) (0x400 + ((_entry) * 4)) #define WIN1_PAL(_entry) (0x800 + ((_entry) * 4)) -/* system specific implementation code for palette sizes, and other - * information that changes depending on which architecture is being - * compiled. -*/ - -/* return true if window _win has OSD register D */ -#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0) - -static inline unsigned int s3c_fb_win_pal_size(unsigned int win) -{ - if (win < 2) - return 256; - if (win < 4) - return 16; - if (win == 4) - return 4; - - BUG(); /* shouldn't get here */ -} - -static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp) -{ - /* all windows can do 1/2 bpp */ - - if ((bpp == 25 || bpp == 19) && win == 0) - return 0; /* win 0 does not have 19 or 25bpp modes */ - - if (bpp == 4 && win == 4) - return 0; - - if (bpp == 8 && (win >= 3)) - return 0; /* win 3/4 cannot do 8bpp in any mode */ - - return 1; -} - static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) { switch (window) { @@ -203,57 +38,4 @@ static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) BUG(); } -static inline int s3c_fb_pal_is16(unsigned int window) -{ - return window > 1; -} - -struct s3c_fb_palette { - struct fb_bitfield r; - struct fb_bitfield g; - struct fb_bitfield b; - struct fb_bitfield a; -}; - -static inline void s3c_fb_init_palette(unsigned int window, - struct s3c_fb_palette *palette) -{ - if (window < 2) { - /* Windows 0/1 are 8/8/8 or A/8/8/8 */ - palette->r.offset = 16; - palette->r.length = 8; - palette->g.offset = 8; - palette->g.length = 8; - palette->b.offset = 0; - palette->b.length = 8; - } else { - /* currently we assume RGB 5/6/5 */ - palette->r.offset = 11; - palette->r.length = 5; - palette->g.offset = 5; - palette->g.length = 6; - palette->b.offset = 0; - palette->b.length = 5; - } -} - -/* Notes on per-window bpp settings - * - * Value Win0 Win1 Win2 Win3 Win 4 - * 0000 1(P) 1(P) 1(P) 1(P) 1(P) - * 0001 2(P) 2(P) 2(P) 2(P) 2(P) - * 0010 4(P) 4(P) 4(P) 4(P) -none- - * 0011 8(P) 8(P) -none- -none- -none- - * 0100 -none- 8(A232) 8(A232) -none- -none- - * 0101 16(565) 16(565) 16(565) 16(565) 16(565) - * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) - * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) - * 1000 18(666) 18(666) 18(666) 18(666) 18(666) - * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) - * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) - * 1011 24(888) 24(888) 24(888) 24(888) 24(888) - * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) - * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) - * 1110 -none- -none- -none- -none- -none- - * 1111 -none- -none- -none- -none- -none- -*/ +#endif /* __ASM_ARCH_MACH_REGS_FB_H */ diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c index b42bdd0f213..d876ee50367 100644 --- a/arch/arm/mach-s3c6400/s3c6400.c +++ b/arch/arm/mach-s3c6400/s3c6400.c @@ -45,6 +45,7 @@ void __init s3c6400_map_io(void) s3c6400_default_sdhci0(); s3c6400_default_sdhci1(); + s3c6400_default_sdhci2(); /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c index 9b67c663d9d..522c0869195 100644 --- a/arch/arm/mach-s3c6410/cpu.c +++ b/arch/arm/mach-s3c6410/cpu.c @@ -58,6 +58,7 @@ void __init s3c6410_map_io(void) /* initialise device information early */ s3c6410_default_sdhci0(); s3c6410_default_sdhci1(); + s3c6410_default_sdhci2(); /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c index c5741056193..cdd4b537855 100644 --- a/arch/arm/mach-s3c6410/mach-hmt.c +++ b/arch/arm/mach-s3c6410/mach-hmt.c @@ -250,7 +250,7 @@ static void __init hmt_machine_init(void) { s3c_i2c0_set_platdata(NULL); s3c_fb_set_platdata(&hmt_lcd_pdata); - s3c_device_nand.dev.platform_data = &hmt_nand_info; + s3c_nand_set_platdata(&hmt_nand_info); gpio_request(S3C64XX_GPC(7), "usb power"); gpio_direction_output(S3C64XX_GPC(7), 0); diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 9f1a2146262..480d297c1de 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/smsc911x.h> +#include <linux/regulator/fixed.h> #ifdef CONFIG_SMDK6410_WM1190_EV1 #include <linux/mfd/wm8350/core.h> @@ -184,6 +185,43 @@ static struct platform_device smdk6410_smsc911x = { }, }; +#ifdef CONFIG_REGULATOR +static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = { + { + /* WM8580 */ + .supply = "PVDD", + .dev_name = "0-001b", + }, + { + /* WM8580 */ + .supply = "AVDD", + .dev_name = "0-001b", + }, +}; + +static struct regulator_init_data smdk6410_b_pwr_5v_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers), + .consumer_supplies = smdk6410_b_pwr_5v_consumers, +}; + +static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { + .supply_name = "B_PWR_5V", + .microvolts = 5000000, + .init_data = &smdk6410_b_pwr_5v_data, +}; + +static struct platform_device smdk6410_b_pwr_5v = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &smdk6410_b_pwr_5v_pdata, + }, +}; +#endif + static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -198,6 +236,10 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_usb, &s3c_device_usb_hsotg, + +#ifdef CONFIG_REGULATOR + &smdk6410_b_pwr_5v, +#endif &smdk6410_lcd_powerdev, &smdk6410_smsc911x, @@ -232,6 +274,14 @@ static struct regulator_init_data wm8350_dcdc3_data = { }; /* USB, EXT, PCM, ADC/DAC, USB, MMC */ +static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { + { + /* WM8580 */ + .supply = "DVDD", + .dev_name = "0-001b", + }, +}; + static struct regulator_init_data wm8350_dcdc4_data = { .constraints = { .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV", @@ -239,6 +289,8 @@ static struct regulator_init_data wm8350_dcdc4_data = { .max_uV = 3000000, .always_on = 1, }, + .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers), + .consumer_supplies = wm8350_dcdc4_consumers, }; /* ARM core */ diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index b1a4ba50441..0dd2b8c6eab 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -14,9 +14,23 @@ config CPU_S5PC100 help Enable S5PC100 CPU support +config S5PC100_SETUP_SDHCI + bool + select S5PC1XX_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PC100 based SDHCI systems + config MACH_SMDKC100 bool "SMDKC100" select CPU_S5PC100 + select S3C_DEV_FB + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S5PC1XX_SETUP_I2C0 select S5PC1XX_SETUP_I2C1 + select S5PC1XX_SETUP_FB_24BPP + select S5PC100_SETUP_SDHCI help Machine support for the Samsung SMDKC100 diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index afc89b381d7..809ff10f768 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -13,5 +13,9 @@ obj- := obj-$(CONFIG_CPU_S5PC100) += cpu.o +# Helper and device support + +obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o + # machine support obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index 0e718890da3..d79e7574a85 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -22,6 +22,8 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <asm/proc-fns.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -32,6 +34,7 @@ #include <plat/cpu-freq.h> #include <plat/regs-serial.h> +#include <plat/regs-power.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -45,6 +48,23 @@ static struct map_desc s5pc100_iodesc[] __initdata = { }; +static void s5pc100_idle(void) +{ + unsigned long tmp; + + tmp = __raw_readl(S5PC100_PWR_CFG); + tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE; + tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK; + tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE; + __raw_writel(tmp, S5PC100_PWR_CFG); + + tmp = __raw_readl(S5PC100_OTHERS); + tmp |= S5PC100_PMU_INT_DISABLE; + __raw_writel(tmp, S5PC100_OTHERS); + + cpu_do_idle(); +} + /* s5pc100_map_io * * register the standard cpu IO areas @@ -55,6 +75,13 @@ void __init s5pc100_map_io(void) iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); /* initialise device information early */ + s5pc100_default_sdhci0(); + s5pc100_default_sdhci1(); + s5pc100_default_sdhci2(); + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); } void __init s5pc100_init_clocks(int xtal) @@ -93,5 +120,7 @@ int __init s5pc100_init(void) { printk(KERN_DEBUG "S5PC100: Initialising architecture\n"); + s5pc1xx_idle = s5pc100_idle; + return sysdev_register(&s5pc100_sysdev); } diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index c74fc93d7d1..2c4cbe8ee6b 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -18,40 +18,45 @@ #define gpio_to_irq __gpio_to_irq /* GPIO bank sizes */ -#define S5PC1XX_GPIO_A0_NR (8) -#define S5PC1XX_GPIO_A1_NR (5) -#define S5PC1XX_GPIO_B_NR (8) -#define S5PC1XX_GPIO_C_NR (5) -#define S5PC1XX_GPIO_D_NR (7) -#define S5PC1XX_GPIO_E0_NR (8) -#define S5PC1XX_GPIO_E1_NR (6) -#define S5PC1XX_GPIO_F0_NR (8) -#define S5PC1XX_GPIO_F1_NR (8) -#define S5PC1XX_GPIO_F2_NR (8) -#define S5PC1XX_GPIO_F3_NR (4) -#define S5PC1XX_GPIO_G0_NR (8) -#define S5PC1XX_GPIO_G1_NR (3) -#define S5PC1XX_GPIO_G2_NR (7) -#define S5PC1XX_GPIO_G3_NR (7) -#define S5PC1XX_GPIO_H0_NR (8) -#define S5PC1XX_GPIO_H1_NR (8) -#define S5PC1XX_GPIO_H2_NR (8) -#define S5PC1XX_GPIO_H3_NR (8) -#define S5PC1XX_GPIO_I_NR (8) -#define S5PC1XX_GPIO_J0_NR (8) -#define S5PC1XX_GPIO_J1_NR (5) -#define S5PC1XX_GPIO_J2_NR (8) -#define S5PC1XX_GPIO_J3_NR (8) -#define S5PC1XX_GPIO_J4_NR (4) -#define S5PC1XX_GPIO_K0_NR (8) -#define S5PC1XX_GPIO_K1_NR (6) -#define S5PC1XX_GPIO_K2_NR (8) -#define S5PC1XX_GPIO_K3_NR (8) -#define S5PC1XX_GPIO_MP00_NR (8) -#define S5PC1XX_GPIO_MP01_NR (8) -#define S5PC1XX_GPIO_MP02_NR (8) -#define S5PC1XX_GPIO_MP03_NR (8) -#define S5PC1XX_GPIO_MP04_NR (5) +#define S5PC100_GPIO_A0_NR (8) +#define S5PC100_GPIO_A1_NR (5) +#define S5PC100_GPIO_B_NR (8) +#define S5PC100_GPIO_C_NR (5) +#define S5PC100_GPIO_D_NR (7) +#define S5PC100_GPIO_E0_NR (8) +#define S5PC100_GPIO_E1_NR (6) +#define S5PC100_GPIO_F0_NR (8) +#define S5PC100_GPIO_F1_NR (8) +#define S5PC100_GPIO_F2_NR (8) +#define S5PC100_GPIO_F3_NR (4) +#define S5PC100_GPIO_G0_NR (8) +#define S5PC100_GPIO_G1_NR (3) +#define S5PC100_GPIO_G2_NR (7) +#define S5PC100_GPIO_G3_NR (7) +#define S5PC100_GPIO_H0_NR (8) +#define S5PC100_GPIO_H1_NR (8) +#define S5PC100_GPIO_H2_NR (8) +#define S5PC100_GPIO_H3_NR (8) +#define S5PC100_GPIO_I_NR (8) +#define S5PC100_GPIO_J0_NR (8) +#define S5PC100_GPIO_J1_NR (5) +#define S5PC100_GPIO_J2_NR (8) +#define S5PC100_GPIO_J3_NR (8) +#define S5PC100_GPIO_J4_NR (4) +#define S5PC100_GPIO_K0_NR (8) +#define S5PC100_GPIO_K1_NR (6) +#define S5PC100_GPIO_K2_NR (8) +#define S5PC100_GPIO_K3_NR (8) +#define S5PC100_GPIO_L0_NR (8) +#define S5PC100_GPIO_L1_NR (8) +#define S5PC100_GPIO_L2_NR (8) +#define S5PC100_GPIO_L3_NR (8) +#define S5PC100_GPIO_L4_NR (8) +#define S5PC100_GPIO_MP00_NR (8) +#define S5PC100_GPIO_MP01_NR (8) +#define S5PC100_GPIO_MP02_NR (8) +#define S5PC100_GPIO_MP03_NR (8) +#define S5PC100_GPIO_MP04_NR (5) /* GPIO bank numbes */ @@ -64,83 +69,94 @@ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) enum s3c_gpio_number { - S5PC1XX_GPIO_A0_START = 0, - S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0), - S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1), - S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B), - S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C), - S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D), - S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0), - S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1), - S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0), - S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1), - S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2), - S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3), - S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0), - S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1), - S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2), - S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3), - S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0), - S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1), - S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2), - S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3), - S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I), - S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0), - S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1), - S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2), - S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3), - S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4), - S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0), - S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1), - S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2), - S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3), - S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00), - S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01), - S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02), - S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03), + S5PC100_GPIO_A0_START = 0, + S5PC100_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0), + S5PC100_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1), + S5PC100_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B), + S5PC100_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C), + S5PC100_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D), + S5PC100_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0), + S5PC100_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1), + S5PC100_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0), + S5PC100_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1), + S5PC100_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2), + S5PC100_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3), + S5PC100_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0), + S5PC100_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1), + S5PC100_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2), + S5PC100_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3), + S5PC100_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0), + S5PC100_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1), + S5PC100_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2), + S5PC100_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3), + S5PC100_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I), + S5PC100_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0), + S5PC100_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1), + S5PC100_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2), + S5PC100_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3), + S5PC100_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4), + S5PC100_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0), + S5PC100_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1), + S5PC100_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2), + S5PC100_GPIO_L0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3), + S5PC100_GPIO_L1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0), + S5PC100_GPIO_L2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1), + S5PC100_GPIO_L3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2), + S5PC100_GPIO_L4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3), + S5PC100_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4), + S5PC100_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00), + S5PC100_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01), + S5PC100_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02), + S5PC100_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03), + S5PC100_GPIO_END = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04), }; -/* S5PC1XX GPIO number definitions. */ -#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr)) -#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr)) -#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr)) -#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr)) -#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr)) -#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr)) -#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr)) -#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr)) -#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr)) -#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr)) -#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr)) -#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr)) -#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr)) -#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr)) -#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr)) -#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr)) -#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr)) -#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr)) -#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr)) -#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr)) -#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr)) -#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr)) -#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr)) -#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr)) -#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr)) -#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr)) -#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr)) -#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr)) -#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr)) -#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr)) -#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr)) -#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr)) -#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr)) -#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr)) +/* S5PC100 GPIO number definitions. */ +#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr)) +#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr)) +#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr)) +#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr)) +#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr)) +#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr)) +#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr)) +#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr)) +#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr)) +#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr)) +#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr)) +#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr)) +#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr)) +#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr)) +#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr)) +#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr)) +#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr)) +#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr)) +#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr)) +#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr)) +#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr)) +#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr)) +#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr)) +#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr)) +#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr)) +#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr)) +#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr)) +#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr)) +#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr)) +#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr)) +#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr)) +#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr)) +#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr)) +#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr)) +#define S5PC100_MP00(_nr) (S5PC100_GPIO_MP00_START + (_nr)) +#define S5PC100_MP01(_nr) (S5PC100_GPIO_MP01_START + (_nr)) +#define S5PC100_MP02(_nr) (S5PC100_GPIO_MP02_START + (_nr)) +#define S5PC100_MP03(_nr) (S5PC100_GPIO_MP03_START + (_nr)) +#define S5PC100_MP04(_nr) (S5PC100_GPIO_MP04_START + (_nr)) +#define S5PC100_MP05(_nr) (S5PC100_GPIO_MP05_START + (_nr)) -/* the end of the S5PC1XX specific gpios */ -#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1) -#define S3C_GPIO_END S5PC1XX_GPIO_END +/* It used the end of the S5PC1XX gpios */ +#define S3C_GPIO_END S5PC100_GPIO_END /* define the number of gpios we need to the one after the MP04() range */ -#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1) +#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index 622720dba28..b53fa48a52c 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -11,4 +11,9 @@ #include <plat/irqs.h> +/* LCD */ +#define IRQ_LCD_FIFO IRQ_LCD0 +#define IRQ_LCD_VSYNC IRQ_LCD1 +#define IRQ_LCD_SYSTEM IRQ_LCD2 + #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 9e9f39130b2..4681ebe8bef 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -17,6 +17,19 @@ #include <plat/map-base.h> +/* + * map-base.h has already defined virtual memory address + * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s) + * S3C_VA_SYS S3C_ADDR(0x00100000) system control + * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used) + * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block + * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog + * S3C_VA_UART S3C_ADDR(0x01000000) UART + * + * S5PC100 specific virtual memory address can be defined here + * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO + * + */ /* Chip ID */ #define S5PC100_PA_CHIPID (0xE0000000) @@ -24,13 +37,20 @@ #define S5PC1XX_VA_CHIPID S3C_VA_SYS /* System */ -#define S5PC100_PA_SYS (0xE0100000) -#define S5PC100_PA_CLK (S5PC100_PA_SYS + 0x0) -#define S5PC100_PA_PWR (S5PC100_PA_SYS + 0x8000) +#define S5PC100_PA_CLK (0xE0100000) +#define S5PC100_PA_CLK_OTHER (0xE0200000) +#define S5PC100_PA_PWR (0xE0108000) #define S5PC1XX_PA_CLK S5PC100_PA_CLK #define S5PC1XX_PA_PWR S5PC100_PA_PWR +#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER #define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000) #define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000) +#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000) + +/* GPIO */ +#define S5PC100_PA_GPIO (0xE0300000) +#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO +#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) /* Interrupt */ #define S5PC100_PA_VIC (0xE4000000) @@ -40,23 +60,64 @@ #define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) +/* DMA */ +#define S5PC100_PA_MDMA (0xE8100000) +#define S5PC100_PA_PDMA0 (0xE9000000) +#define S5PC100_PA_PDMA1 (0xE9200000) + /* Timer */ #define S5PC100_PA_TIMER (0xEA000000) #define S5PC1XX_PA_TIMER S5PC100_PA_TIMER #define S5PC1XX_VA_TIMER S3C_VA_TIMER +/* RTC */ +#define S5PC100_PA_RTC (0xEA300000) + /* UART */ #define S5PC100_PA_UART (0xEC000000) #define S5PC1XX_PA_UART S5PC100_PA_UART #define S5PC1XX_VA_UART S3C_VA_UART -/* IIC */ -#define S5PC100_PA_IIC (0xEC100000) +/* I2C */ +#define S5PC100_PA_I2C (0xEC100000) +#define S5PC100_PA_I2C1 (0xEC200000) + +/* USB HS OTG */ +#define S5PC100_PA_USB_HSOTG (0xED200000) +#define S5PC100_PA_USB_HSPHY (0xED300000) + +/* SD/MMC */ +#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) +#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0) +#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1) +#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2) + +/* LCD */ +#define S5PC100_PA_FB (0xEE000000) + +/* Multimedia */ +#define S5PC100_PA_G2D (0xEE800000) +#define S5PC100_PA_JPEG (0xEE500000) +#define S5PC100_PA_ROTATOR (0xEE100000) +#define S5PC100_PA_G3D (0xEF000000) + +/* I2S */ +#define S5PC100_PA_I2S0 (0xF2000000) +#define S5PC100_PA_I2S1 (0xF2100000) +#define S5PC100_PA_I2S2 (0xF2200000) + +/* KEYPAD */ +#define S5PC100_PA_KEYPAD (0xF3100000) + +/* ADC & TouchScreen */ +#define S5PC100_PA_TSADC (0xF3000000) /* ETC */ #define S5PC100_PA_SDRAM (0x20000000) +#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM /* compatibility defines. */ +#define S3C_PA_RTC S5PC100_PA_RTC #define S3C_PA_UART S5PC100_PA_UART #define S3C_PA_UART0 (S5PC100_PA_UART + 0x0) #define S3C_PA_UART1 (S5PC100_PA_UART + 0x400) @@ -67,9 +128,23 @@ #define S3C_VA_UART2 (S3C_VA_UART + 0x800) #define S3C_VA_UART3 (S3C_VA_UART + 0xC00) #define S3C_UART_OFFSET 0x400 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define S3C_PA_FB S5PC100_PA_FB +#define S3C_PA_G2D S5PC100_PA_G2D +#define S3C_PA_G3D S5PC100_PA_G3D +#define S3C_PA_JPEG S5PC100_PA_JPEG +#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR #define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0) #define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) #define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000) -#define S3C_PA_IIC S5PC100_PA_IIC +#define S3C_PA_IIC S5PC100_PA_I2C +#define S3C_PA_IIC1 S5PC100_PA_I2C1 +#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG +#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY +#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0 +#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1 +#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2 +#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD +#define S3C_PA_TSADC S5PC100_PA_TSADC #endif /* __ASM_ARCH_C100_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h new file mode 100644 index 00000000000..1732cd28c76 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h @@ -0,0 +1,139 @@ +/* arch/arm/mach-s5pc100/include/mach/regs-fb.h + * + * Copyright 2009 Samsung Electronics Co. + * Pawel Osciak <p.osciak@samsung.com> + * + * Framebuffer register definitions for Samsung S5PC100. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_FB_H +#define __ASM_ARCH_REGS_FB_H __FILE__ + +#include <plat/regs-fb-v4.h> + +/* VP1 interface timing control */ +#define VP1CON0 (0x118) +#define VP1_RATECON_EN (1 << 31) +#define VP1_CLKRATE_MASK (0xff) + +#define VP1CON1 (0x11c) +#define VP1_VTREGCON_EN (1 << 31) +#define VP1_VBPD_MASK (0xfff) +#define VP1_VBPD_SHIFT (16) + + +#define WPALCON_H (0x19c) +#define WPALCON_L (0x1a0) + +/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but + * different for WPAL2-4 + */ +/* In WPALCON_L (aka WPALCON) */ +#define WPALCON_W1PAL_32BPP_A888 (0x7 << 3) +#define WPALCON_W0PAL_32BPP_A888 (0x7 << 0) + +/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H, + * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]). + */ +#define WPALCON_L_WxPAL_L_MASK (0x1) +#define WPALCON_L_W2PAL_L_SHIFT (6) +#define WPALCON_L_W3PAL_L_SHIFT (7) +#define WPALCON_L_W4PAL_L_SHIFT (8) + +#define WPALCON_L_WxPAL_H_MASK (0x3) +#define WPALCON_H_W2PAL_H_SHIFT (9) +#define WPALCON_H_W3PAL_H_SHIFT (13) +#define WPALCON_H_W4PAL_H_SHIFT (17) + +/* Per-window alpha value registers */ +/* For window 0 8-bit alpha values are in VIDW0ALPHAx, + * for windows 1-4 alpha values consist of two parts, the 4 low bits are + * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC, + * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0]) + */ +#define VIDWxALPHA0(_win) (0x200 + (_win * 8)) +#define VIDWxALPHA1(_win) (0x204 + (_win * 8)) + +/* Only for window 0 in VIDW0ALPHAx. */ +#define VIDW0ALPHAx_R(_x) ((_x) << 16) +#define VIDW0ALPHAx_R_MASK (0xff << 16) +#define VIDW0ALPHAx_R_SHIFT (16) +#define VIDW0ALPHAx_G(_x) ((_x) << 8) +#define VIDW0ALPHAx_G_MASK (0xff << 8) +#define VIDW0ALPHAx_G_SHIFT (8) +#define VIDW0ALPHAx_B(_x) ((_x) << 0) +#define VIDW0ALPHAx_B_MASK (0xff << 0) +#define VIDW0ALPHAx_B_SHIFT (0) + +/* Low 4 bits of alpha0-1 for windows 1-4 */ +#define VIDW14ALPHAx_R_L(_x) ((_x) << 16) +#define VIDW14ALPHAx_R_L_MASK (0xf << 16) +#define VIDW14ALPHAx_R_L_SHIFT (16) +#define VIDW14ALPHAx_G_L(_x) ((_x) << 8) +#define VIDW14ALPHAx_G_L_MASK (0xf << 8) +#define VIDW14ALPHAx_G_L_SHIFT (8) +#define VIDW14ALPHAx_B_L(_x) ((_x) << 0) +#define VIDW14ALPHAx_B_L_MASK (0xf << 0) +#define VIDW14ALPHAx_B_L_SHIFT (0) + + +/* Per-window blending equation control registers */ +#define BLENDEQx(_win) (0x244 + ((_win) * 4)) +#define BLENDEQ1 (0x244) +#define BLENDEQ2 (0x248) +#define BLENDEQ3 (0x24c) +#define BLENDEQ4 (0x250) + +#define BLENDEQx_Q_FUNC(_x) ((_x) << 18) +#define BLENDEQx_Q_FUNC_MASK (0xf << 18) +#define BLENDEQx_P_FUNC(_x) ((_x) << 12) +#define BLENDEQx_P_FUNC_MASK (0xf << 12) +#define BLENDEQx_B_FUNC(_x) ((_x) << 6) +#define BLENDEQx_B_FUNC_MASK (0xf << 6) +#define BLENDEQx_A_FUNC(_x) ((_x) << 0) +#define BLENDEQx_A_FUNC_MASK (0xf << 0) + +#define BLENDCON (0x260) +#define BLENDCON_8BIT_ALPHA (1 << 0) + +/* Per-window palette base addresses (start of palette memory). + * Each window palette area consists of 256 32-bit entries. + * START is the first address (entry 0th), END is the address of 255th entry. + */ +#define WIN0_PAL_BASE (0x2400) +#define WIN0_PAL_END (0x27fc) +#define WIN1_PAL_BASE (0x2800) +#define WIN1_PAL_END (0x2bfc) +#define WIN2_PAL_BASE (0x2c00) +#define WIN2_PAL_END (0x2ffc) +#define WIN3_PAL_BASE (0x3000) +#define WIN3_PAL_END (0x33fc) +#define WIN4_PAL_BASE (0x3400) +#define WIN4_PAL_END (0x37fc) + +#define WIN0_PAL(_entry) (WIN0_PAL_BASE + ((_entry) * 4)) +#define WIN1_PAL(_entry) (WIN1_PAL_BASE + ((_entry) * 4)) +#define WIN2_PAL(_entry) (WIN2_PAL_BASE + ((_entry) * 4)) +#define WIN3_PAL(_entry) (WIN3_PAL_BASE + ((_entry) * 4)) +#define WIN4_PAL(_entry) (WIN4_PAL_BASE + ((_entry) * 4)) + +static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) +{ + switch (window) { + case 0: return WIN0_PAL(reg); + case 1: return WIN1_PAL(reg); + case 2: return WIN2_PAL(reg); + case 3: return WIN3_PAL(reg); + case 4: return WIN4_PAL(reg); + } + + BUG(); +} + + +#endif /* __ASM_ARCH_REGS_FB_H */ + diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h index e3901437547..f0d31a2a598 100644 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ b/arch/arm/mach-s5pc100/include/mach/system.h @@ -11,14 +11,21 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H __FILE__ +#include <linux/io.h> +#include <mach/map.h> +#include <plat/regs-clock.h> + +void (*s5pc1xx_idle)(void); + static void arch_idle(void) { - /* nothing here yet */ + if (s5pc1xx_idle) + s5pc1xx_idle(); } static void arch_reset(char mode, const char *cmd) { - /* nothing here yet */ + __raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET); + return; } - #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 214093cd763..ae3c52cd0eb 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -27,16 +27,22 @@ #include <asm/mach/map.h> #include <mach/map.h> +#include <mach/regs-fb.h> +#include <video/platform_lcd.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-gpio.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/s5pc100.h> +#include <plat/fb.h> +#include <plat/iic.h> #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) @@ -73,9 +79,78 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { }, }; +/* I2C0 */ +static struct i2c_board_info i2c_devs0[] __initdata = { +}; + +/* I2C1 */ +static struct i2c_board_info i2c_devs1[] __initdata = { +}; + +/* LCD power controller */ +static void smdkc100_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + /* backlight */ + gpio_direction_output(S5PC100_GPD(0), power); + + if (power) { + /* module reset */ + gpio_direction_output(S5PC100_GPH0(6), 1); + mdelay(100); + gpio_direction_output(S5PC100_GPH0(6), 0); + mdelay(10); + gpio_direction_output(S5PC100_GPH0(6), 1); + mdelay(10); + } +} + +static struct plat_lcd_data smdkc100_lcd_power_data = { + .set_power = smdkc100_lcd_power_set, +}; + +static struct platform_device smdkc100_lcd_powerdev = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &smdkc100_lcd_power_data, +}; + +/* Frame Buffer */ +static struct s3c_fb_pd_win smdkc100_fb_win0 = { + /* this is to ensure we use win0 */ + .win_mode = { + .refresh = 70, + .pixclock = (8+13+3+800)*(7+5+1+480), + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = { + .win[0] = &smdkc100_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = s5pc100_fb_gpio_setup_24bpp, +}; + static struct map_desc smdkc100_iodesc[] = {}; static struct platform_device *smdkc100_devices[] __initdata = { + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_fb, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &smdkc100_lcd_powerdev, }; static void __init smdkc100_map_io(void) @@ -87,12 +162,24 @@ static void __init smdkc100_map_io(void) static void __init smdkc100_machine_init(void) { + /* I2C */ + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + + s3c_fb_set_platdata(&smdkc100_lcd_pdata); + + /* LCD init */ + gpio_request(S5PC100_GPD(0), "GPD"); + gpio_request(S5PC100_GPH0(6), "GPH0"); + smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0); platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); } MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .phys_io = S5PC1XX_PA_UART & 0xfff00000, + .phys_io = S5PC100_PA_UART & 0xfff00000, .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc, .boot_params = S5PC100_PA_SDRAM + 0x100, diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c new file mode 100644 index 00000000000..4385986a3da --- /dev/null +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s5pc100/setup-sdhci.c + * + * Copyright 2008 Samsung Electronics + * + * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * Based on mach-s3c6410/setup-sdhci.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include <plat/regs-sdhci.h> +#include <plat/sdhci.h> + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *s5pc100_hsmmc_clksrcs[4] = { + [0] = "hsmmc", + [1] = "hsmmc", + /* [2] = "mmc_bus", not yet succesfuuly used yet */ + /* [3] = "48m", - note not succesfully used yet */ +}; + + +void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + /* don't need to alter anything acording to card-type */ + + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 8931c5f0e46..e139a72c214 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -159,6 +159,12 @@ config S3C_GPIO_CFG_S3C64XX Internal configuration to enable S3C64XX style GPIO configuration functions. +config S5P_GPIO_CFG_S5PC1XX + bool + help + Internal configuration to enable S5PC1XX style GPIO configuration + functions. + # DMA config S3C_DMA @@ -178,6 +184,11 @@ config S3C_DEV_HSMMC1 help Compile in platform device definitions for HSMMC channel 1 +config S3C_DEV_HSMMC2 + bool + help + Compile in platform device definitions for HSMMC channel 2 + config S3C_DEV_I2C1 bool help diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 3c09109e9e8..50444da9842 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o +obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c index 4d01ef1a25d..619cfa82dca 100644 --- a/arch/arm/plat-s3c/clock.c +++ b/arch/arm/plat-s3c/clock.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/clock.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C24XX Core clock control support @@ -337,7 +337,7 @@ int s3c24xx_register_clocks(struct clk **clks, int nr_clks) int __init s3c24xx_register_baseclocks(unsigned long xtal) { - printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); + printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n"); clk_xtal.rate = xtal; diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-s3c/dev-hsmmc2.c new file mode 100644 index 00000000000..824580bc0e0 --- /dev/null +++ b/arch/arm/plat-s3c/dev-hsmmc2.c @@ -0,0 +1,69 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc2.c + * + * Copyright (c) 2009 Samsung Electronics + * Copyright (c) 2009 Maurus Cuelenaere + * + * Based on arch/arm/plat-s3c/dev-hsmmc1.c + * original file Copyright (c) 2008 Simtec Electronics + * + * S3C series device definition for hsmmc device 2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc2_resource[] = { + [0] = { + .start = S3C_PA_HSMMC2, + .end = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC2, + .end = IRQ_HSMMC2, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc2 = { + .name = "s3c-sdhci", + .id = 2, + .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource), + .resource = s3c_hsmmc2_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc2_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc2_def_platdata, + }, +}; + +void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c index 428372868fb..4c761529b94 100644 --- a/arch/arm/plat-s3c/dev-i2c0.c +++ b/arch/arm/plat-s3c/dev-i2c0.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c/dev-i2c0.c * - * Copyright 2008,2009 Simtec Electronics + * Copyright 2008-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c index 8349c462788..d44f7911050 100644 --- a/arch/arm/plat-s3c/dev-i2c1.c +++ b/arch/arm/plat-s3c/dev-i2c1.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c/dev-i2c1.c * - * Copyright 2008,2009 Simtec Electronics + * Copyright 2008-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c index 4e532373243..e771e77dcd5 100644 --- a/arch/arm/plat-s3c/dev-nand.c +++ b/arch/arm/plat-s3c/dev-nand.c @@ -9,8 +9,12 @@ #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + #include <mach/map.h> #include <plat/devs.h> +#include <plat/nand.h> static struct resource s3c_nand_resource[] = { [0] = { @@ -28,3 +32,96 @@ struct platform_device s3c_device_nand = { }; EXPORT_SYMBOL(s3c_device_nand); + +/** + * s3c_nand_copy_set() - copy nand set data + * @set: The new structure, directly copied from the old. + * + * Copy all the fields from the NAND set field from what is probably __initdata + * to new kernel memory. The code returns 0 if the copy happened correctly or + * an error code for the calling function to display. + * + * Note, we currently do not try and look to see if we've already copied the + * data in a previous set. + */ +static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set) +{ + void *ptr; + int size; + + size = sizeof(struct mtd_partition) * set->nr_partitions; + if (size) { + ptr = kmemdup(set->partitions, size, GFP_KERNEL); + set->partitions = ptr; + + if (!ptr) + return -ENOMEM; + } + + size = sizeof(int) * set->nr_chips; + if (size) { + ptr = kmemdup(set->nr_map, size, GFP_KERNEL); + set->nr_map = ptr; + + if (!ptr) + return -ENOMEM; + } + + if (set->ecc_layout) { + ptr = kmemdup(set->ecc_layout, + sizeof(struct nand_ecclayout), GFP_KERNEL); + set->ecc_layout = ptr; + + if (!ptr) + return -ENOMEM; + } + + return 0; +} + +void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) +{ + struct s3c2410_platform_nand *npd; + int size; + int ret; + + /* note, if we get a failure in allocation, we simply drop out of the + * function. If there is so little memory available at initialisation + * time then there is little chance the system is going to run. + */ + + npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL); + if (!npd) { + printk(KERN_ERR "%s: failed copying platform data\n", __func__); + return; + } + + /* now see if we need to copy any of the nand set data */ + + size = sizeof(struct s3c2410_nand_set) * npd->nr_sets; + if (size) { + struct s3c2410_nand_set *from = npd->sets; + struct s3c2410_nand_set *to; + int i; + + to = kmemdup(from, size, GFP_KERNEL); + npd->sets = to; /* set, even if we failed */ + + if (!to) { + printk(KERN_ERR "%s: no memory for sets\n", __func__); + return; + } + + for (i = 0; i < npd->nr_sets; i++) { + ret = s3c_nand_copy_set(to); + if (!ret) { + printk(KERN_ERR "%s: failed to copy set %d\n", + __func__, i); + return; + } + to++; + } + } +} + +EXPORT_SYMBOL_GPL(s3c_nand_set_platdata); diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c index c9db75c06af..a995850cd9d 100644 --- a/arch/arm/plat-s3c/dma.c +++ b/arch/arm/plat-s3c/dma.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c/dma.c * - * Copyright (c) 2003-2005,2006,2009 Simtec Electronics + * Copyright (c) 2003-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h index 0f440b9168d..53a93656d5d 100644 --- a/arch/arm/plat-s3c/include/plat/audio-simtec.h +++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h @@ -33,5 +33,5 @@ struct s3c24xx_audio_simtec_pdata { void (*startup)(void); }; -extern int simtec_audio_add(const char *codec_name, +extern int simtec_audio_add(const char *codec_name, bool has_lr_routing, struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h index 7b982b7f28c..94eb06a2ea5 100644 --- a/arch/arm/plat-s3c/include/plat/cpu-freq.h +++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c/include/plat/cpu-freq.h * - * Copyright (c) 2006,2007 Simtec Electronics + * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h index fbc3d498e02..d1131ca11e9 100644 --- a/arch/arm/plat-s3c/include/plat/cpu.h +++ b/arch/arm/plat-s3c/include/plat/cpu.h @@ -12,6 +12,9 @@ /* todo - fix when rmk changes iodescs to use `void __iomem *` */ +#ifndef __SAMSUNG_PLAT_CPU_H +#define __SAMSUNG_PLAT_CPU_H + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ @@ -73,3 +76,6 @@ extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; +extern void (*s5pc1xx_idle)(void); + +#endif diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h index 34dba98f08e..e429d10be3a 100644 --- a/arch/arm/plat-s3c/include/plat/dma.h +++ b/arch/arm/plat-s3c/include/plat/dma.h @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c/include/plat/dma.h * - * Copyright (C) 2003,2004,2006 Simtec Electronics + * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Samsung S3C DMA support diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h index 214ff561b0d..f8db87930f8 100644 --- a/arch/arm/plat-s3c/include/plat/fb.h +++ b/arch/arm/plat-s3c/include/plat/fb.h @@ -70,4 +70,11 @@ extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); */ extern void s3c64xx_fb_gpio_setup_24bpp(void); +/** + * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s5pc100_fb_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h index 67450f11574..3083df00dee 100644 --- a/arch/arm/plat-s3c/include/plat/iic.h +++ b/arch/arm/plat-s3c/include/plat/iic.h @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c/include/plat/iic.h * - * Copyright 2004,2009 Simtec Electronics + * Copyright 2004-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C - I2C Controller platform_device info diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index 18f958801e6..06598597841 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -55,3 +55,11 @@ struct s3c2410_platform_nand { int chip); }; +/** + * s3c_nand_set_platdata() - register NAND platform data. + * @nand: The NAND platform data to register with s3c_device_nand. + * + * This function copies the given NAND platform data, @nand and registers + * it with the s3c_device_nand. This allows @nand to be __initdata. +*/ +extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h new file mode 100644 index 00000000000..a60ed0d06c9 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h @@ -0,0 +1,235 @@ +/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - new-style framebuffer register definitions + * + * This is the register set for the new style framebuffer interface + * found from the S3C2443 onwards and specifically the S3C64XX series + * S3C6400 and S3C6410. + * + * The file contains the cpu specific items which change between whichever + * architecture is selected. See <plat/regs-fb.h> for the core definitions + * that are the same. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* include the core definitions here, in case we really do need to + * override them at a later date. +*/ + +#include <plat/regs-fb.h> + +#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */ +#define VIDCON1_FSTATUS_EVEN (1 << 15) + +/* Video timing controls */ +#define VIDTCON0 (0x10) +#define VIDTCON1 (0x14) +#define VIDTCON2 (0x18) + +/* Window position controls */ + +#define WINCON(_win) (0x20 + ((_win) * 4)) + +/* OSD1 and OSD4 do not have register D */ + +#define VIDOSD_A(_win) (0x40 + ((_win) * 16)) +#define VIDOSD_B(_win) (0x44 + ((_win) * 16)) +#define VIDOSD_C(_win) (0x48 + ((_win) * 16)) +#define VIDOSD_D(_win) (0x4C + ((_win) * 16)) + + +#define VIDINTCON0 (0x130) + +#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4)) + +/* WINCONx */ + +#define WINCONx_CSCWIDTH_MASK (0x3 << 26) +#define WINCONx_CSCWIDTH_SHIFT (26) +#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) +#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) + +#define WINCONx_ENLOCAL (1 << 22) +#define WINCONx_BUFSTATUS (1 << 21) +#define WINCONx_BUFSEL (1 << 20) +#define WINCONx_BUFAUTOEN (1 << 19) +#define WINCONx_YCbCr (1 << 13) + +#define WINCON1_LOCALSEL_CAMIF (1 << 23) + +#define WINCON2_LOCALSEL_CAMIF (1 << 23) +#define WINCON2_BLD_PIX (1 << 6) + +#define WINCON2_ALPHA_SEL (1 << 1) +#define WINCON2_BPPMODE_MASK (0xf << 2) +#define WINCON2_BPPMODE_SHIFT (2) +#define WINCON2_BPPMODE_1BPP (0x0 << 2) +#define WINCON2_BPPMODE_2BPP (0x1 << 2) +#define WINCON2_BPPMODE_4BPP (0x2 << 2) +#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON2_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2) + +#define WINCON3_BLD_PIX (1 << 6) + +#define WINCON3_ALPHA_SEL (1 << 1) +#define WINCON3_BPPMODE_MASK (0xf << 2) +#define WINCON3_BPPMODE_SHIFT (2) +#define WINCON3_BPPMODE_1BPP (0x0 << 2) +#define WINCON3_BPPMODE_2BPP (0x1 << 2) +#define WINCON3_BPPMODE_4BPP (0x2 << 2) +#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON3_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2) + +#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) + +#define DITHMODE (0x170) +#define WINxMAP(_win) (0x180 + ((_win) * 4)) + + +#define DITHMODE_R_POS_MASK (0x3 << 5) +#define DITHMODE_R_POS_SHIFT (5) +#define DITHMODE_R_POS_8BIT (0x0 << 5) +#define DITHMODE_R_POS_6BIT (0x1 << 5) +#define DITHMODE_R_POS_5BIT (0x2 << 5) + +#define DITHMODE_G_POS_MASK (0x3 << 3) +#define DITHMODE_G_POS_SHIFT (3) +#define DITHMODE_G_POS_8BIT (0x0 << 3) +#define DITHMODE_G_POS_6BIT (0x1 << 3) +#define DITHMODE_G_POS_5BIT (0x2 << 3) + +#define DITHMODE_B_POS_MASK (0x3 << 1) +#define DITHMODE_B_POS_SHIFT (1) +#define DITHMODE_B_POS_8BIT (0x0 << 1) +#define DITHMODE_B_POS_6BIT (0x1 << 1) +#define DITHMODE_B_POS_5BIT (0x2 << 1) + +#define DITHMODE_DITH_EN (1 << 0) + +#define WPALCON (0x1A0) + +/* Palette control */ +/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L), + * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */ +#define WPALCON_W4PAL_16BPP_A555 (1 << 8) +#define WPALCON_W3PAL_16BPP_A555 (1 << 7) +#define WPALCON_W2PAL_16BPP_A555 (1 << 6) + + +/* system specific implementation code for palette sizes, and other + * information that changes depending on which architecture is being + * compiled. +*/ + +/* return true if window _win has OSD register D */ +#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0) + +static inline unsigned int s3c_fb_win_pal_size(unsigned int win) +{ + if (win < 2) + return 256; + if (win < 4) + return 16; + if (win == 4) + return 4; + + BUG(); /* shouldn't get here */ +} + +static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp) +{ + /* all windows can do 1/2 bpp */ + + if ((bpp == 25 || bpp == 19) && win == 0) + return 0; /* win 0 does not have 19 or 25bpp modes */ + + if (bpp == 4 && win == 4) + return 0; + + if (bpp == 8 && (win >= 3)) + return 0; /* win 3/4 cannot do 8bpp in any mode */ + + return 1; +} + +static inline int s3c_fb_pal_is16(unsigned int window) +{ + return window > 1; +} + +struct s3c_fb_palette { + struct fb_bitfield r; + struct fb_bitfield g; + struct fb_bitfield b; + struct fb_bitfield a; +}; + +static inline void s3c_fb_init_palette(unsigned int window, + struct s3c_fb_palette *palette) +{ + if (window < 2) { + /* Windows 0/1 are 8/8/8 or A/8/8/8 */ + palette->r.offset = 16; + palette->r.length = 8; + palette->g.offset = 8; + palette->g.length = 8; + palette->b.offset = 0; + palette->b.length = 8; + } else { + /* currently we assume RGB 5/6/5 */ + palette->r.offset = 11; + palette->r.length = 5; + palette->g.offset = 5; + palette->g.length = 6; + palette->b.offset = 0; + palette->b.length = 5; + } +} + +/* Notes on per-window bpp settings + * + * Value Win0 Win1 Win2 Win3 Win 4 + * 0000 1(P) 1(P) 1(P) 1(P) 1(P) + * 0001 2(P) 2(P) 2(P) 2(P) 2(P) + * 0010 4(P) 4(P) 4(P) 4(P) -none- + * 0011 8(P) 8(P) -none- -none- -none- + * 0100 -none- 8(A232) 8(A232) -none- -none- + * 0101 16(565) 16(565) 16(565) 16(565) 16(565) + * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) + * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) + * 1000 18(666) 18(666) 18(666) 18(666) 18(666) + * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) + * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) + * 1011 24(888) 24(888) 24(888) 24(888) 24(888) + * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) + * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) + * 1110 -none- -none- -none- -none- -none- + * 1111 -none- -none- -none- -none- -none- +*/ diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h index b2caa4bca27..238efea7b9e 100644 --- a/arch/arm/plat-s3c/include/plat/regs-nand.h +++ b/arch/arm/plat-s3c/include/plat/regs-nand.h @@ -1,7 +1,7 @@ /* arch/arm/mach-s3c2410/include/mach/regs-nand.h * - * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ + * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h index 66af75a5cdd..85d8904e7f2 100644 --- a/arch/arm/plat-s3c/include/plat/regs-serial.h +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -6,7 +6,7 @@ * * Copyright (C) 2002 Shane Nay (shane@minirl.com) * - * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk) + * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) * * Adapted from: * diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h index f615308ccdf..53198673b6b 100644 --- a/arch/arm/plat-s3c/include/plat/sdhci.h +++ b/arch/arm/plat-s3c/include/plat/sdhci.h @@ -57,6 +57,7 @@ struct s3c_sdhci_platdata { */ extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); /* Default platform data, exported so that per-cpu initialisation can * set the correct one when there are more than one cpu type selected. @@ -64,11 +65,16 @@ extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; /* Helper function availablity */ extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); /* S3C6400 SDHCI setup */ @@ -103,6 +109,17 @@ static inline void s3c6400_default_sdhci1(void) static inline void s3c6400_default_sdhci1(void) { } #endif /* CONFIG_S3C_DEV_HSMMC1 */ +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s3c6400_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +} +#else +static inline void s3c6400_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + #else static inline void s3c6400_default_sdhci0(void) { } static inline void s3c6400_default_sdhci1(void) { } @@ -140,9 +157,70 @@ static inline void s3c6410_default_sdhci1(void) static inline void s3c6410_default_sdhci1(void) { } #endif /* CONFIG_S3C_DEV_HSMMC1 */ +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s3c6410_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; +} +#else +static inline void s3c6410_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + #else static inline void s3c6410_default_sdhci0(void) { } static inline void s3c6410_default_sdhci1(void) { } #endif /* CONFIG_S3C6410_SETUP_SDHCI */ +/* S5PC100 SDHCI setup */ + +#ifdef CONFIG_S5PC100_SETUP_SDHCI +extern char *s5pc100_hsmmc_clksrcs[4]; + +extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +#ifdef CONFIG_S3C_DEV_HSMMC +static inline void s5pc100_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s5pc100_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s5pc100_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + + +#else +static inline void s5pc100_default_sdhci0(void) { } +static inline void s5pc100_default_sdhci1(void) { } +static inline void s5pc100_default_sdhci2(void) { } +#endif /* CONFIG_S5PC100_SETUP_SDHCI */ + #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c index 39f2555564d..8eb1f439861 100644 --- a/arch/arm/plat-s3c/pm-check.c +++ b/arch/arm/plat-s3c/pm-check.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/pm-check.c * originally in linux/arch/arm/plat-s3c24xx/pm.c * - * Copyright (c) 2004,2006,2008 Simtec Electronics + * Copyright (c) 2004-2008 Simtec Electronics * http://armlinux.simtec.co.uk * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index 8d97db2c7a0..767470601e5 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/pm.c * * Copyright 2008 Openmoko, Inc. - * Copyright 2004,2006,2008 Simtec Electronics + * Copyright 2004-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 9c7aca48964..20fbf936bb9 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -178,4 +178,11 @@ config MACH_SMDK help Common machine code for SMDK2410 and SMDK2440 +config S3C24XX_SIMTEC_AUDIO + bool + depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) + default y + help + Add audio devices for common Simtec S3C24XX boards + endif diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 7780d2dd833..5dee8c12e8b 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -55,3 +55,4 @@ obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o # machine common support obj-$(CONFIG_MACH_SMDK) += common-smdk.o +obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index 0afb217a775..ac061a1bcb3 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/clock-dclk.c * - * Copyright (c) 2004,2008 Simtec Electronics + * Copyright (c) 2004-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index aa119863c5c..9e0e20ad2e4 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -198,7 +198,7 @@ void __init smdk_machine_init(void) if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; - s3c_device_nand.dev.platform_data = &smdk_nand_info; + s3c_nand_set_platdata(&smdk_nand_info); platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index 4f1b789a117..2d42efb9f4e 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/cpu-freq.c * - * Copyright (c) 2006,2007,2008 Simtec Electronics + * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index f046f8c5108..f65192d5b1d 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/dma.c * - * Copyright (c) 2003-2005,2006 Simtec Electronics + * Copyright 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2410 DMA core @@ -1310,7 +1310,7 @@ int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq, int channel; int ret; - printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); + printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n"); dma_channels = channels; diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index c776120b99e..33d421d78ba 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c/include/plat/cpu-freq.h * - * Copyright (c) 2006,2007,2009 Simtec Electronics + * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index c2cef613968..36aaa10fad0 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h @@ -1,6 +1,31 @@ #ifndef _ARCH_MCI_H #define _ARCH_MCI_H +/** + * struct s3c24xx_mci_pdata - sd/mmc controller platform data + * @no_wprotect: Set this to indicate there is no write-protect switch. + * @no_detect: Set this if there is no detect switch. + * @wprotect_invert: Invert the default sense of the write protect switch. + * @detect_invert: Invert the default sense of the write protect switch. + * @use_dma: Set to allow the use of DMA. + * @gpio_detect: GPIO number for the card detect line. + * @gpio_wprotect: GPIO number for the write protect line. + * @ocr_avail: The mask of the available power states, non-zero to use. + * @set_power: Callback to control the power mode. + * + * The @gpio_detect is used for card detection when @no_wprotect is unset, + * and the default sense is that 0 returned from gpio_get_value() means + * that a card is inserted. If @detect_invert is set, then the value from + * gpio_get_value() is inverted, which makes 1 mean card inserted. + * + * The driver will use @gpio_wprotect to signal whether the card is write + * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() + * means the card is read/write, and 1 means read-only. The @wprotect_invert + * will invert the value returned from gpio_get_value(). + * + * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set + * to a non-zero value, otherwise the default of 3.2-3.4V is used. + */ struct s3c24xx_mci_pdata { unsigned int no_wprotect : 1; unsigned int no_detect : 1; diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h index 3bc0a216df9..1b0f4c36d38 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h @@ -1,6 +1,6 @@ /* arch/arm/mach-s3c2410/include/mach/dma.h * - * Copyright (C) 2003,2004,2006 Simtec Electronics + * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Samsung S3C24XX DMA support diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c index b7acf1a8ecd..ea8dea3339a 100644 --- a/arch/arm/plat-s3c24xx/irq-pm.c +++ b/arch/arm/plat-s3c24xx/irq-pm.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/irq-om.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index d02f5f02045..ef0f521437d 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index da0d3217d3e..663b280d65d 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/pm-simtec.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://armlinux.simtec.co.uk/ @@ -35,7 +35,7 @@ #include <plat/pm.h> -#define COPYRIGHT ", (c) 2005 Simtec Electronics" +#define COPYRIGHT ", Copyright 2005 Simtec Electronics" /* pm_simtec_init * diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 56e5253ca02..3620dd29909 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/pm.c * - * Copyright (c) 2004,2006 Simtec Electronics + * Copyright (c) 2004-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C24XX Power Manager (Suspend-To-RAM) support diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c index d0a3a145cd4..963fb0b4379 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c * - * Copyright (c) 2006,2008,2009 Simtec Electronics + * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c index fd45e47facb..24993dce10b 100644 --- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c * - * Copyright (c) 2006,2008 Simtec Electronics + * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c index ae2e6c604f2..976002fb1b8 100644 --- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c +++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c * - * Copyright (c) 2006,2008,2009 Simtec Electronics + * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * Vincent Sanders <vince@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c index ff9443b233a..49f65032f2c 100644 --- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c +++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c @@ -1,6 +1,6 @@ /* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c * - * Copyright (c) 2006,2007 Simtec Electronics + * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * Vincent Sanders <vince@arm.linux.org.uk> diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c index dde41f171af..79371091aa3 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c * - * Copyright (c) 2004-2005,2008 Simtec Electronics + * Copyright (c) 2004-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c index 0902afd227c..a75c0c2431e 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-irq.c +++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003-2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c new file mode 100644 index 00000000000..6bc832e0d8e --- /dev/null +++ b/arch/arm/plat-s3c24xx/simtec-audio.c @@ -0,0 +1,77 @@ +/* linux/arch/arm/plat-s3c24xx/simtec-audio.c + * + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * Audio setup for various Simtec S3C24XX implementations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/io.h> + +#include <mach/bast-map.h> +#include <mach/bast-irq.h> +#include <mach/bast-cpld.h> + +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +#include <plat/audio-simtec.h> +#include <plat/devs.h> + +/* platform ops for audio */ + +static void simtec_audio_startup_lrroute(void) +{ + unsigned int tmp; + unsigned long flags; + + local_irq_save(flags); + + tmp = __raw_readb(BAST_VA_CTRL1); + tmp &= ~BAST_CPLD_CTRL1_LRMASK; + tmp |= BAST_CPLD_CTRL1_LRCDAC; + __raw_writeb(tmp, BAST_VA_CTRL1); + + local_irq_restore(flags); +} + +static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata; +static char our_name[32]; + +static struct platform_device simtec_audio_dev = { + .name = our_name, + .id = -1, + .dev = { + .parent = &s3c_device_iis.dev, + .platform_data = &simtec_audio_platdata, + }, +}; + +int __init simtec_audio_add(const char *name, bool has_lr_routing, + struct s3c24xx_audio_simtec_pdata *spd) +{ + if (!name) + name = "tlv320aic23"; + + snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name); + + /* copy platform data so the source can be __initdata */ + if (spd) + simtec_audio_platdata = *spd; + + if (has_lr_routing) + simtec_audio_platdata.startup = simtec_audio_startup_lrroute; + + platform_device_register(&s3c_device_iis); + platform_device_register(&simtec_audio_dev); + return 0; +} diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c index b1fdd83940a..49796d2db86 100644 --- a/arch/arm/plat-s3c64xx/cpu.c +++ b/arch/arm/plat-s3c64xx/cpu.c @@ -107,6 +107,11 @@ static struct map_desc s3c_iodesc[] __initdata = { .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY), + .length = SZ_1K, + .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c index e6e0843215d..74c0e8347de 100644 --- a/arch/arm/plat-s3c64xx/cpufreq.c +++ b/arch/arm/plat-s3c64xx/cpufreq.c @@ -19,6 +19,7 @@ static struct clk *armclk; static struct regulator *vddarm; +static unsigned long regulator_latency; #ifdef CONFIG_CPU_S3C6410 struct s3c64xx_dvfs { @@ -27,11 +28,10 @@ struct s3c64xx_dvfs { }; static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { - [0] = { 1000000, 1000000 }, - [1] = { 1000000, 1050000 }, - [2] = { 1050000, 1100000 }, - [3] = { 1050000, 1150000 }, - [4] = { 1250000, 1350000 }, + [0] = { 1000000, 1150000 }, + [1] = { 1050000, 1150000 }, + [2] = { 1100000, 1150000 }, + [3] = { 1200000, 1350000 }, }; static struct cpufreq_frequency_table s3c64xx_freq_table[] = { @@ -41,9 +41,9 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = { { 1, 266000 }, { 2, 333000 }, { 2, 400000 }, - { 3, 532000 }, - { 3, 533000 }, - { 4, 667000 }, + { 2, 532000 }, + { 2, 533000 }, + { 3, 667000 }, { 0, CPUFREQ_TABLE_END }, }; #endif @@ -141,7 +141,7 @@ err: } #ifdef CONFIG_REGULATOR -static void __init s3c64xx_cpufreq_constrain_voltages(void) +static void __init s3c64xx_cpufreq_config_regulator(void) { int count, v, i, found; struct cpufreq_frequency_table *freq; @@ -150,11 +150,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void) count = regulator_count_voltages(vddarm); if (count < 0) { pr_err("cpufreq: Unable to check supported voltages\n"); - return; } freq = s3c64xx_freq_table; - while (freq->frequency != CPUFREQ_TABLE_END) { + while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) { if (freq->frequency == CPUFREQ_ENTRY_INVALID) continue; @@ -175,6 +174,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void) freq++; } + + /* Guess based on having to do an I2C/SPI write; in future we + * will be able to query the regulator performance here. */ + regulator_latency = 1 * 1000 * 1000; } #endif @@ -206,7 +209,7 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) pr_err("cpufreq: Only frequency scaling available\n"); vddarm = NULL; } else { - s3c64xx_cpufreq_constrain_voltages(); + s3c64xx_cpufreq_config_regulator(); } #endif @@ -217,8 +220,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) /* Check for frequencies we can generate */ r = clk_round_rate(armclk, freq->frequency * 1000); r /= 1000; - if (r != freq->frequency) + if (r != freq->frequency) { + pr_debug("cpufreq: %dkHz unsupported by clock\n", + freq->frequency); freq->frequency = CPUFREQ_ENTRY_INVALID; + } /* If we have no regulator then assume startup * frequency is the maximum we can support. */ @@ -230,9 +236,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) policy->cur = clk_get_rate(armclk) / 1000; - /* Pick a conservative guess in ns: we'll need ~1 I2C/SPI - * write plus clock reprogramming. */ - policy->cpuinfo.transition_latency = 2 * 1000 * 1000; + /* Datasheet says PLL stabalisation time (if we were to use + * the PLLs, which we don't currently) is ~300us worst case, + * but add some fudge. + */ + policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency; ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table); if (ret != 0) { diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index 92859290ea3..77856045727 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -213,6 +213,11 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { .get_pull = s3c_gpio_getpull_updown, }; +int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin) +{ + return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; +} + static struct s3c_gpio_chip gpio_4bit[] = { { .base = S3C64XX_GPA_BASE, @@ -269,10 +274,16 @@ static struct s3c_gpio_chip gpio_4bit[] = { .base = S3C64XX_GPM(0), .ngpio = S3C64XX_GPIO_M_NR, .label = "GPM", + .to_irq = s3c64xx_gpio2int_gpm, }, }, }; +int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin) +{ + return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; +} + static struct s3c_gpio_chip gpio_4bit2[] = { { .base = S3C64XX_GPH_BASE + 0x4, @@ -297,6 +308,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = { .base = S3C64XX_GPL(0), .ngpio = S3C64XX_GPIO_L_NR, .label = "GPL", + .to_irq = s3c64xx_gpio2int_gpl, }, }, }; diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h index c47daf7e272..e22b49f4f98 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h @@ -36,18 +36,18 @@ #define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) #define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) -#define S3C64XX_GPC4_I2S0_V40_DO (0x05 << 16) +#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) #define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) #define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) #define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) -#define S3C64XX_GPC5_I2S1_V40_DO (0x05 << 20) +#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) #define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) #define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) #define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) #define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) -#define S3C64XX_GPC7_I2S2_V40_DO (0x05 << 28) +#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) #define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index f81b7b818ba..ebdf183a091 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -65,7 +65,7 @@ static void s3c_irq_eint_maskack(unsigned int irq) static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) { int offs = eint_offset(irq); - int pin; + int pin, pin_val; int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -109,7 +109,10 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) return -1; } - shift = (offs / 2) * 4; + if (offs <= 15) + shift = (offs / 2) * 4; + else + shift = ((offs - 16) / 2) * 4; mask = 0x7 << shift; ctrl = __raw_readl(reg); @@ -119,12 +122,18 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) /* set the GPIO pin appropriately */ - if (offs < 23) + if (offs < 16) { pin = S3C64XX_GPN(offs); - else + pin_val = S3C_GPIO_SFN(2); + } else if (offs < 23) { + pin = S3C64XX_GPL(offs + 8 - 16); + pin_val = S3C_GPIO_SFN(3); + } else { pin = S3C64XX_GPM(offs - 23); + pin_val = S3C_GPIO_SFN(3); + } - s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(pin, pin_val); return 0; } diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c index 5417123b0ac..a58c0cc7ba5 100644 --- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c +++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c @@ -53,3 +53,23 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3)); } + +void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S3C64XX_GPH(6 + width); + + /* Set all the necessary GPH pins to special-function 1 */ + for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Set all the necessary GPC pins to special-function 1 */ + for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig index a8a711c3c06..1608e62b0c9 100644 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -15,6 +15,9 @@ config PLAT_S5PC1XX select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK select S3C_GPIO_PULL_UPDOWN + select S3C_GPIO_CFG_S3C24XX + select S3C_GPIO_CFG_S3C64XX + select S5P_GPIO_CFG_S5PC1XX help Base platform code for any Samsung S5PC1XX device @@ -34,7 +37,12 @@ config CPU_S5PC100_CLOCK # platform specific device setup -config S5PC100_SETUP_I2C0 +config S5PC1XX_SETUP_FB_24BPP + bool + help + Common setup code for S5PC1XX with an 24bpp RGB display helper. + +config S5PC1XX_SETUP_I2C0 bool default y help @@ -43,8 +51,14 @@ config S5PC100_SETUP_I2C0 Note, currently since i2c0 is always compiled, this setup helper is always compiled with it. -config S5PC100_SETUP_I2C1 +config S5PC1XX_SETUP_I2C1 bool help Common setup code for i2c bus 1. + +config S5PC1XX_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + endif diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile index f1ecb2c37ee..278f2680608 100644 --- a/arch/arm/plat-s5pc1xx/Makefile +++ b/arch/arm/plat-s5pc1xx/Makefile @@ -13,7 +13,9 @@ obj- := obj-y += dev-uart.o obj-y += cpu.o -obj-y += irq.o +obj-y += irq.o irq-gpio.o irq-eint.o +obj-y += clock.o +obj-y += gpiolib.o # CPU support @@ -22,5 +24,8 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o # Device setup -obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o -obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o +obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o +obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c new file mode 100644 index 00000000000..26c21d84979 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/clock.c @@ -0,0 +1,728 @@ +/* linux/arch/arm/plat-s5pc1xx/clock.c + * + * Copyright 2009 Samsung Electronics Co. + * + * S5PC1XX Base clock support + * + * Based on plat-s3c64xx/clock.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/regs-clock.h> +#include <plat/devs.h> +#include <plat/clock.h> + +struct clk clk_27m = { + .name = "clk_27m", + .id = -1, + .rate = 27000000, +}; + +static int clk_48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5PC100_CLKSRC1); + if (enable) + val |= S5PC100_CLKSRC1_CLK48M_MASK; + else + val &= ~S5PC100_CLKSRC1_CLK48M_MASK; + + __raw_writel(val, S5PC100_CLKSRC1); + local_irq_restore(flags); + + return 0; +} + +struct clk clk_48m = { + .name = "clk_48m", + .id = -1, + .rate = 48000000, + .enable = clk_48m_ctrl, +}; + +struct clk clk_54m = { + .name = "clk_54m", + .id = -1, + .rate = 54000000, +}; + +static int clk_default_setrate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} + +static int clk_dummy_enable(struct clk *clk, int enable) +{ + return 0; +} + +struct clk clk_hd0 = { + .name = "hclkd0", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, + .enable = clk_dummy_enable, +}; + +struct clk clk_pd0 = { + .name = "pclkd0", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, + .enable = clk_dummy_enable, +}; + +static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + u32 con; + + con = __raw_readl(reg); + if (enable) + con |= ctrlbit; + else + con &= ~ctrlbit; + __raw_writel(con, reg); + + return 0; +} + +static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable); +} + +static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable); +} + +static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable); +} + +static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable); +} + +static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable); +} + +static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable); +} + +static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable); +} + +static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable); +} + +static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable); +} + +static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable); +} + +int s5pc100_sclk0_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable); +} + +int s5pc100_sclk1_ctrl(struct clk *clk, int enable) +{ + return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable); +} + +static struct clk s5pc100_init_clocks_disable[] = { + { + .name = "dsi", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_DSI, + }, { + .name = "csi", + .id = -1, + .parent = &clk_h, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_CSI, + }, { + .name = "ccan", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_CCAN0, + }, { + .name = "ccan", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_CCAN1, + }, { + .name = "keypad", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, + }, { + .name = "hclkd2", + .id = -1, + .parent = NULL, + .enable = s5pc100_clk_d20_ctrl, + .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2, + }, { + .name = "iis-d2", + .id = -1, + .parent = NULL, + .enable = s5pc100_clk_d20_ctrl, + .ctrlbit = S5PC100_CLKGATE_D20_I2SD2, + }, +}; + +static struct clk s5pc100_init_clocks[] = { + /* System1 (D0_0) devices */ + { + .name = "intc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_INTC, + }, { + .name = "tzic", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_TZIC, + }, { + .name = "cf-ata", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_CFCON, + }, { + .name = "mdma", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_MDMA, + }, { + .name = "g2d", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_G2D, + }, { + .name = "secss", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_SECSS, + }, { + .name = "cssys", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d00_ctrl, + .ctrlbit = S5PC100_CLKGATE_D00_CSSYS, + }, + + /* Memory (D0_1) devices */ + { + .name = "dmc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_DMC, + }, { + .name = "sromc", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_SROMC, + }, { + .name = "onenand", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_ONENAND, + }, { + .name = "nand", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_NFCON, + }, { + .name = "intmem", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_INTMEM, + }, { + .name = "ebi", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d01_ctrl, + .ctrlbit = S5PC100_CLKGATE_D01_EBI, + }, + + /* System2 (D0_2) devices */ + { + .name = "seckey", + .id = -1, + .parent = &clk_pd0, + .enable = s5pc100_clk_d02_ctrl, + .ctrlbit = S5PC100_CLKGATE_D02_SECKEY, + }, { + .name = "sdm", + .id = -1, + .parent = &clk_hd0, + .enable = s5pc100_clk_d02_ctrl, + .ctrlbit = S5PC100_CLKGATE_D02_SDM, + }, + + /* File (D1_0) devices */ + { + .name = "pdma", + .id = 0, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_PDMA0, + }, { + .name = "pdma", + .id = 1, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_PDMA1, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_USBHOST, + }, { + .name = "otg", + .id = -1, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_USBOTG, + }, { + .name = "modem", + .id = -1, + .parent = &clk_h, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_48m, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0, + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_48m, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1, + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_48m, + .enable = s5pc100_clk_d10_ctrl, + .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2, + }, + + /* Multimedia1 (D1_1) devices */ + { + .name = "lcd", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_LCD, + }, { + .name = "rotator", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR, + }, { + .name = "fimc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC0, + }, { + .name = "fimc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC1, + }, { + .name = "fimc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_FIMC2, + }, { + .name = "jpeg", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_JPEG, + }, { + .name = "g3d", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d11_ctrl, + .ctrlbit = S5PC100_CLKGATE_D11_G3D, + }, + + /* Multimedia2 (D1_2) devices */ + { + .name = "tv", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_TV, + }, { + .name = "vp", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_VP, + }, { + .name = "mixer", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_MIXER, + }, { + .name = "hdmi", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_HDMI, + }, { + .name = "mfc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d12_ctrl, + .ctrlbit = S5PC100_CLKGATE_D12_MFC, + }, + + /* System (D1_3) devices */ + { + .name = "chipid", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_CHIPID, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_GPIO, + }, { + .name = "apc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_APC, + }, { + .name = "iec", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_IEC, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_PWM, + }, { + .name = "systimer", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_WDT, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d13_ctrl, + .ctrlbit = S5PC100_CLKGATE_D13_RTC, + }, + + /* Connectivity (D1_4) devices */ + { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_UART3, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_IIC, + }, { + .name = "hdmi-i2c", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI1, + }, { + .name = "spi", + .id = 2, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_SPI2, + }, { + .name = "irda", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_IRDA, + }, { + .name = "hsitx", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HSITX, + }, { + .name = "hsirx", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d14_ctrl, + .ctrlbit = S5PC100_CLKGATE_D14_HSIRX, + }, + + /* Audio (D1_5) devices */ + { + .name = "iis", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS0, + }, { + .name = "iis", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS1, + }, { + .name = "iis", + .id = 2, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_IIS2, + }, { + .name = "ac97", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_AC97, + }, { + .name = "pcm", + .id = 0, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_PCM0, + }, { + .name = "pcm", + .id = 1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_PCM1, + }, { + .name = "spdif", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_SPDIF, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_TSADC, + }, { + .name = "cg", + .id = -1, + .parent = &clk_p, + .enable = s5pc100_clk_d15_ctrl, + .ctrlbit = S5PC100_CLKGATE_D15_CG, + }, + + /* Audio (D2_0) devices: all disabled */ + + /* Special Clocks 0 */ + { + .name = "sclk_hpm", + .id = -1, + .parent = NULL, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM, + }, { + .name = "sclk_onenand", + .id = -1, + .parent = NULL, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND, + }, { + .name = "spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48, + }, { + .name = "spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48, + }, { + .name = "spi_48", + .id = 2, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48, + }, { + .name = "mmc_48", + .id = 0, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48, + }, { + .name = "mmc_48", + .id = 1, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48, + }, { + .name = "mmc_48", + .id = 2, + .parent = &clk_48m, + .enable = s5pc100_sclk0_ctrl, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48, + }, + /* Special Clocks 1 */ +}; + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_epll, + &clk_27m, + &clk_48m, + &clk_54m, +}; + +void __init s5pc1xx_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + int size; + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + clkp = s5pc100_init_clocks; + size = ARRAY_SIZE(s5pc100_init_clocks); + + for (ptr = 0; ptr < size; ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + clkp = s5pc100_init_clocks_disable; + size = ARRAY_SIZE(s5pc100_init_clocks_disable); + + for (ptr = 0; ptr < size; ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c index 715a7330794..02baeaa2a12 100644 --- a/arch/arm/plat-s5pc1xx/cpu.c +++ b/arch/arm/plat-s5pc1xx/cpu.c @@ -55,6 +55,16 @@ static struct cpu_table cpu_ids[] __initdata = { static struct map_desc s5pc1xx_iodesc[] __initdata = { { + .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER, + .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC1XX_VA_GPIO, + .pfn = __phys_to_pfn(S5PC100_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5PC1XX_VA_CHIPID, .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID), .length = SZ_16, diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c new file mode 100644 index 00000000000..bba675df9c7 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/gpio-config.c @@ -0,0 +1,62 @@ +/* linux/arch/arm/plat-s5pc1xx/gpio-config.c + * + * Copyright 2009 Samsung Electronics + * + * S5PC1XX GPIO Configuration. + * + * Based on plat-s3c64xx/gpio-config.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/gpio-core.h> +#include <plat/gpio-cfg-s5pc1xx.h> + +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + void __iomem *reg; + int shift = off * 2; + u32 drvstr; + + if (!chip) + return -EINVAL; + + reg = chip->base + 0x0C; + + drvstr = __raw_readl(reg); + drvstr = 0xffff & (0x3 << shift); + drvstr = drvstr >> shift; + + return (__force s5p_gpio_drvstr_t)drvstr; +} +EXPORT_SYMBOL(s5p_gpio_get_drvstr); + +int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off, + s5p_gpio_drvstr_t drvstr) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + void __iomem *reg; + int shift = off * 2; + u32 tmp; + + if (!chip) + return -EINVAL; + + reg = chip->base + 0x0C; + + tmp = __raw_readl(reg); + tmp |= drvstr << shift; + + __raw_writel(tmp, reg); + + return 0; +} +EXPORT_SYMBOL(s5p_gpio_set_drvstr); diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c new file mode 100644 index 00000000000..facb410e7a7 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/gpiolib.c @@ -0,0 +1,503 @@ +/* + * arch/arm/plat-s5pc1xx/gpiolib.c + * + * Copyright 2009 Samsung Electronics Co + * Kyungmin Park <kyungmin.park@samsung.com> + * + * S5PC1XX - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> +#include <mach/gpio-core.h> + +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/regs-gpio.h> + +/* S5PC100 GPIO bank summary: + * + * Bank GPIOs Style INT Type + * A0 8 4Bit GPIO_INT0 + * A1 5 4Bit GPIO_INT1 + * B 8 4Bit GPIO_INT2 + * C 5 4Bit GPIO_INT3 + * D 7 4Bit GPIO_INT4 + * E0 8 4Bit GPIO_INT5 + * E1 6 4Bit GPIO_INT6 + * F0 8 4Bit GPIO_INT7 + * F1 8 4Bit GPIO_INT8 + * F2 8 4Bit GPIO_INT9 + * F3 4 4Bit GPIO_INT10 + * G0 8 4Bit GPIO_INT11 + * G1 3 4Bit GPIO_INT12 + * G2 7 4Bit GPIO_INT13 + * G3 7 4Bit GPIO_INT14 + * H0 8 4Bit WKUP_INT + * H1 8 4Bit WKUP_INT + * H2 8 4Bit WKUP_INT + * H3 8 4Bit WKUP_INT + * I 8 4Bit GPIO_INT15 + * J0 8 4Bit GPIO_INT16 + * J1 5 4Bit GPIO_INT17 + * J2 8 4Bit GPIO_INT18 + * J3 8 4Bit GPIO_INT19 + * J4 4 4Bit GPIO_INT20 + * K0 8 4Bit None + * K1 6 4Bit None + * K2 8 4Bit None + * K3 8 4Bit None + * L0 8 4Bit None + * L1 8 4Bit None + * L2 8 4Bit None + * L3 8 4Bit None + */ + +#define OFF_GPCON (0x00) +#define OFF_GPDAT (0x04) + +#define con_4bit_shift(__off) ((__off) * 4) + +#if 1 +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +/* The s5pc1xx_gpiolib routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. + */ + +static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + OFF_GPCON); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + OFF_GPCON); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int s5pc1xx_gpiolib_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + OFF_GPCON); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + OFF_GPDAT); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + OFF_GPDAT); + __raw_writel(con, base + OFF_GPCON); + __raw_writel(dat, base + OFF_GPDAT); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + return S3C_IRQ_GPIO(chip->base + offset); +} + +static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) +{ + int base; + + base = chip->base - S5PC100_GPH0(0); + if (base == 0) + return IRQ_EINT(offset); + base = chip->base - S5PC100_GPH1(0); + if (base == 0) + return IRQ_EINT(8 + offset); + base = chip->base - S5PC100_GPH2(0); + if (base == 0) + return IRQ_EINT(16 + offset); + base = chip->base - S5PC100_GPH3(0); + if (base == 0) + return IRQ_EINT(24 + offset); + return -EINVAL; +} + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_eint = { + .cfg_eint = 0xf, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_chip s5pc100_gpio_chips[] = { + { + .base = S5PC100_GPA0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPA0(0), + .ngpio = S5PC100_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .base = S5PC100_GPA1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPA1(0), + .ngpio = S5PC100_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .base = S5PC100_GPB_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPB(0), + .ngpio = S5PC100_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5PC100_GPC_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPC(0), + .ngpio = S5PC100_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5PC100_GPD_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPD(0), + .ngpio = S5PC100_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5PC100_GPE0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPE0(0), + .ngpio = S5PC100_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .base = S5PC100_GPE1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPE1(0), + .ngpio = S5PC100_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .base = S5PC100_GPF0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF0(0), + .ngpio = S5PC100_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .base = S5PC100_GPF1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF1(0), + .ngpio = S5PC100_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .base = S5PC100_GPF2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF2(0), + .ngpio = S5PC100_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .base = S5PC100_GPF3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF3(0), + .ngpio = S5PC100_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .base = S5PC100_GPG0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG0(0), + .ngpio = S5PC100_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .base = S5PC100_GPG1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG1(0), + .ngpio = S5PC100_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .base = S5PC100_GPG2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG2(0), + .ngpio = S5PC100_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .base = S5PC100_GPG3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG3(0), + .ngpio = S5PC100_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .base = S5PC100_GPH0_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH0(0), + .ngpio = S5PC100_GPIO_H0_NR, + .label = "GPH0", + }, + }, { + .base = S5PC100_GPH1_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH1(0), + .ngpio = S5PC100_GPIO_H1_NR, + .label = "GPH1", + }, + }, { + .base = S5PC100_GPH2_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH2(0), + .ngpio = S5PC100_GPIO_H2_NR, + .label = "GPH2", + }, + }, { + .base = S5PC100_GPH3_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH3(0), + .ngpio = S5PC100_GPIO_H3_NR, + .label = "GPH3", + }, + }, { + .base = S5PC100_GPI_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPI(0), + .ngpio = S5PC100_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5PC100_GPJ0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ0(0), + .ngpio = S5PC100_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .base = S5PC100_GPJ1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ1(0), + .ngpio = S5PC100_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .base = S5PC100_GPJ2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ2(0), + .ngpio = S5PC100_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .base = S5PC100_GPJ3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ3(0), + .ngpio = S5PC100_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .base = S5PC100_GPJ4_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ4(0), + .ngpio = S5PC100_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .base = S5PC100_GPK0_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK0(0), + .ngpio = S5PC100_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .base = S5PC100_GPK1_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK1(0), + .ngpio = S5PC100_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .base = S5PC100_GPK2_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK2(0), + .ngpio = S5PC100_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .base = S5PC100_GPK3_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK3(0), + .ngpio = S5PC100_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .base = S5PC100_GPL0_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL0(0), + .ngpio = S5PC100_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .base = S5PC100_GPL1_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL1(0), + .ngpio = S5PC100_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .base = S5PC100_GPL2_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL2(0), + .ngpio = S5PC100_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .base = S5PC100_GPL3_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL3(0), + .ngpio = S5PC100_GPIO_L3_NR, + .label = "GPL3", + }, + }, { + .base = S5PC100_GPL4_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL4(0), + .ngpio = S5PC100_GPIO_L4_NR, + .label = "GPL4", + }, + }, +}; + +/* FIXME move from irq-gpio.c */ +extern struct irq_chip s5pc1xx_gpioint; +extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); + +static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = s5pc1xx_gpiolib_input; + chip->chip.direction_output = s5pc1xx_gpiolib_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); + + /* Interrupt */ + if (chip->config == &gpio_cfg) { + int i, irq; + + chip->chip.to_irq = s5pc1xx_gpiolib_to_irq; + + for (i = 0; i < chip->chip.ngpio; i++) { + irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i; + set_irq_chip(irq, &s5pc1xx_gpioint); + set_irq_data(irq, &chip->chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + } else if (chip->config == &gpio_cfg_eint) + chip->chip.to_irq = s5pc1xx_gpiolib_to_eint; +} + +static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips, + int nr_chips, + void (*fn)(struct s3c_gpio_chip *)) +{ + for (; nr_chips > 0; nr_chips--, chips++) { + if (fn) + (fn)(chips); + s3c_gpiolib_add(chips); + } +} + +static __init int s5pc1xx_gpiolib_init(void) +{ + struct s3c_gpio_chip *chips; + int nr_chips; + + chips = s5pc100_gpio_chips; + nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); + + s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link); + /* Interrupt */ + set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler); + + return 0; +} +core_initcall(s5pc1xx_gpiolib_init); diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h new file mode 100644 index 00000000000..72ad59f61ef --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h @@ -0,0 +1,32 @@ +/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h + * + * Copyright 2009 Samsung Electronic + * + * S5PC1XX Platform - GPIO pin configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This file contains the necessary definitions to get the basic gpio + * pin configuration done such as setting a pin to input or output or + * changing the pull-{up,down} configurations. + */ + +#ifndef __GPIO_CFG_S5PC1XX_H +#define __GPIO_CFG_S5PC1XX_H __FILE__ + +typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; + +#define S5P_GPIO_DRVSTR_LV1 0x00 +#define S5P_GPIO_DRVSTR_LV2 0x01 +#define S5P_GPIO_DRVSTR_LV3 0x10 +#define S5P_GPIO_DRVSTR_LV4 0x11 + +extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off); + +extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off, + s5p_gpio_drvstr_t drvstr); + +#endif /* __GPIO_CFG_S5PC1XX_H */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h new file mode 100644 index 00000000000..33ad267e847 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h @@ -0,0 +1,44 @@ +/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h + * + * Copyright 2009 Samsung Electronics Co. + * + * External Interrupt (GPH0 ~ GPH3) control register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0) +#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4) +#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8) +#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC) +#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4)) + +#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80) +#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84) +#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88) +#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C) +#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90) +#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94) +#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98) +#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C) +#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4)) + +#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100) +#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104) +#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108) +#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C) +#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4)) + +#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140) +#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144) +#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148) +#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C) +#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4)) + +#define S5PC1XX_WKUP_INT_LOWLEV (0x00) +#define S5PC1XX_WKUP_INT_HILEV (0x01) +#define S5PC1XX_WKUP_INT_FALLEDGE (0x02) +#define S5PC1XX_WKUP_INT_RISEEDGE (0x03) +#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04) diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h index f07d8c3b25d..ef8736366f0 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h +++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h @@ -171,12 +171,21 @@ #define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30) #define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31) +/* External interrupt */ #define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1) -#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) -#define IRQ_EINT(x) S3C_EINT(x) +#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16)) +#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x)) +#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0)) -#define NR_IRQS (IRQ_EINT(31)+1) +/* GPIO interrupt */ +#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) +#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) + +/* + * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs + */ +#define NR_IRQS (S3C_IRQ_GPIO(320) + 1) #endif /* __ASM_PLAT_S5PC1XX_IRQS_H */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h index 75c8390cb82..c5cc86e92d6 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h @@ -13,68 +13,69 @@ #ifndef __PLAT_REGS_CLOCK_H #define __PLAT_REGS_CLOCK_H __FILE__ -#define S5PC1XX_CLKREG(x) (S5PC1XX_VA_CLK + (x)) - -#define S5PC1XX_APLL_LOCK S5PC1XX_CLKREG(0x00) -#define S5PC1XX_MPLL_LOCK S5PC1XX_CLKREG(0x04) -#define S5PC1XX_EPLL_LOCK S5PC1XX_CLKREG(0x08) -#define S5PC100_HPLL_LOCK S5PC1XX_CLKREG(0x0C) - -#define S5PC1XX_APLL_CON S5PC1XX_CLKREG(0x100) -#define S5PC1XX_MPLL_CON S5PC1XX_CLKREG(0x104) -#define S5PC1XX_EPLL_CON S5PC1XX_CLKREG(0x108) -#define S5PC100_HPLL_CON S5PC1XX_CLKREG(0x10C) - -#define S5PC1XX_CLK_SRC0 S5PC1XX_CLKREG(0x200) -#define S5PC1XX_CLK_SRC1 S5PC1XX_CLKREG(0x204) -#define S5PC1XX_CLK_SRC2 S5PC1XX_CLKREG(0x208) -#define S5PC1XX_CLK_SRC3 S5PC1XX_CLKREG(0x20C) - -#define S5PC1XX_CLK_DIV0 S5PC1XX_CLKREG(0x300) -#define S5PC1XX_CLK_DIV1 S5PC1XX_CLKREG(0x304) -#define S5PC1XX_CLK_DIV2 S5PC1XX_CLKREG(0x308) -#define S5PC1XX_CLK_DIV3 S5PC1XX_CLKREG(0x30C) -#define S5PC1XX_CLK_DIV4 S5PC1XX_CLKREG(0x310) - -#define S5PC100_CLK_OUT S5PC1XX_CLKREG(0x400) - -#define S5PC100_CLKGATE_D00 S5PC1XX_CLKREG(0x500) -#define S5PC100_CLKGATE_D01 S5PC1XX_CLKREG(0x504) -#define S5PC100_CLKGATE_D02 S5PC1XX_CLKREG(0x508) - -#define S5PC100_CLKGATE_D10 S5PC1XX_CLKREG(0x520) -#define S5PC100_CLKGATE_D11 S5PC1XX_CLKREG(0x524) -#define S5PC100_CLKGATE_D12 S5PC1XX_CLKREG(0x528) -#define S5PC100_CLKGATE_D13 S5PC1XX_CLKREG(0x52C) -#define S5PC100_CLKGATE_D14 S5PC1XX_CLKREG(0x530) -#define S5PC100_CLKGATE_D15 S5PC1XX_CLKREG(0x534) - -#define S5PC100_CLKGATE_D20 S5PC1XX_CLKREG(0x540) - -#define S5PC100_SCLKGATE0 S5PC1XX_CLKREG(0x560) -#define S5PC100_SCLKGATE1 S5PC1XX_CLKREG(0x564) - -#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200) - -#define S5PC1XX_EPLL_EN (1<<31) -#define S5PC1XX_EPLL_MASK 0xffffffff -#define S5PC1XX_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) +#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x)) +#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x)) + +/* s5pc100 register for clock */ +#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00) +#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04) +#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08) +#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C) + +#define S5PC100_APLL_CON S5PC100_CLKREG(0x100) +#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104) +#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108) +#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C) + +#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200) +#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204) +#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208) +#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C) + +#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300) +#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304) +#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308) +#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C) +#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310) + +#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400) + +#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500) +#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504) +#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508) + +#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520) +#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524) +#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528) +#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C) +#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530) +#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534) + +#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540) + +#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560) +#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564) + +/* EPLL_CON */ +#define S5PC100_EPLL_EN (1<<31) +#define S5PC100_EPLL_MASK 0xffffffff +#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) /* CLKSRC0 */ -#define S5PC1XX_CLKSRC0_APLL_MASK (0x1<<0) -#define S5PC1XX_CLKSRC0_APLL_SHIFT (0) -#define S5PC1XX_CLKSRC0_MPLL_MASK (0x1<<4) -#define S5PC1XX_CLKSRC0_MPLL_SHIFT (4) -#define S5PC1XX_CLKSRC0_EPLL_MASK (0x1<<8) -#define S5PC1XX_CLKSRC0_EPLL_SHIFT (8) +#define S5PC100_CLKSRC0_APLL_MASK (0x1<<0) +#define S5PC100_CLKSRC0_APLL_SHIFT (0) +#define S5PC100_CLKSRC0_MPLL_MASK (0x1<<4) +#define S5PC100_CLKSRC0_MPLL_SHIFT (4) +#define S5PC100_CLKSRC0_EPLL_MASK (0x1<<8) +#define S5PC100_CLKSRC0_EPLL_SHIFT (8) #define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12) #define S5PC100_CLKSRC0_HPLL_SHIFT (12) #define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16) #define S5PC100_CLKSRC0_AMMUX_SHIFT (16) #define S5PC100_CLKSRC0_HREF_MASK (0x1<<20) #define S5PC100_CLKSRC0_HREF_SHIFT (20) -#define S5PC1XX_CLKSRC0_ONENAND_MASK (0x1<<24) -#define S5PC1XX_CLKSRC0_ONENAND_SHIFT (24) +#define S5PC100_CLKSRC0_ONENAND_MASK (0x1<<24) +#define S5PC100_CLKSRC0_ONENAND_SHIFT (24) /* CLKSRC1 */ @@ -127,10 +128,9 @@ #define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24) #define S5PC100_CLKSRC3_SPDIF_SHIFT (24) - /* CLKDIV0 */ -#define S5PC1XX_CLKDIV0_APLL_MASK (0x1<<0) -#define S5PC1XX_CLKDIV0_APLL_SHIFT (0) +#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0) +#define S5PC100_CLKDIV0_APLL_SHIFT (0) #define S5PC100_CLKDIV0_ARM_MASK (0x7<<4) #define S5PC100_CLKDIV0_ARM_SHIFT (4) #define S5PC100_CLKDIV0_D0_MASK (0x7<<8) @@ -141,8 +141,8 @@ #define S5PC100_CLKDIV0_SECSS_SHIFT (16) /* CLKDIV1 */ -#define S5PC100_CLKDIV1_AM_MASK (0x7<<0) -#define S5PC100_CLKDIV1_AM_SHIFT (0) +#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0) +#define S5PC100_CLKDIV1_APLL2_SHIFT (0) #define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4) #define S5PC100_CLKDIV1_MPLL_SHIFT (4) #define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8) @@ -202,7 +202,6 @@ #define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20) #define S5PC100_CLKDIV4_AUDIO2_SHIFT (20) - /* HCLKD0/PCLKD0 Clock Gate 0 Registers */ #define S5PC100_CLKGATE_D00_INTC (1<<0) #define S5PC100_CLKGATE_D00_TZIC (1<<1) @@ -295,8 +294,8 @@ #define S5PC100_CLKGATE_D20_I2SD2 (1<<1) /* Special Clock Gate 0 Registers */ -#define S5PC1XX_CLKGATE_SCLK0_HPM (1<<0) -#define S5PC1XX_CLKGATE_SCLK0_PWI (1<<1) +#define S5PC100_CLKGATE_SCLK0_HPM (1<<0) +#define S5PC100_CLKGATE_SCLK0_PWI (1<<1) #define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2) #define S5PC100_CLKGATE_SCLK0_UART (1<<3) #define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4) @@ -329,89 +328,28 @@ #define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11) #define S5PC100_CLKGATE_SCLK1_CAM (1<<12) -/* register for power management */ -#define S5PC100_PWR_CFG S5PC1XX_CLKREG(0x8000) -#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_CLKREG(0x8004) -#define S5PC100_NORMAL_CFG S5PC1XX_CLKREG(0x8010) -#define S5PC100_STOP_CFG S5PC1XX_CLKREG(0x8014) -#define S5PC100_SLEEP_CFG S5PC1XX_CLKREG(0x8018) -#define S5PC100_STOP_MEM_CFG S5PC1XX_CLKREG(0x801C) -#define S5PC100_OSC_FREQ S5PC1XX_CLKREG(0x8100) -#define S5PC100_OSC_STABLE S5PC1XX_CLKREG(0x8104) -#define S5PC100_PWR_STABLE S5PC1XX_CLKREG(0x8108) -#define S5PC100_MTC_STABLE S5PC1XX_CLKREG(0x8110) -#define S5PC100_CLAMP_STABLE S5PC1XX_CLKREG(0x8114) -#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200) -#define S5PC100_RST_STAT S5PC1XX_CLKREG(0x8300) -#define S5PC100_WAKEUP_STAT S5PC1XX_CLKREG(0x8304) -#define S5PC100_BLK_PWR_STAT S5PC1XX_CLKREG(0x8308) -#define S5PC100_INFORM0 S5PC1XX_CLKREG(0x8400) -#define S5PC100_INFORM1 S5PC1XX_CLKREG(0x8404) -#define S5PC100_INFORM2 S5PC1XX_CLKREG(0x8408) -#define S5PC100_INFORM3 S5PC1XX_CLKREG(0x840C) -#define S5PC100_INFORM4 S5PC1XX_CLKREG(0x8410) -#define S5PC100_INFORM5 S5PC1XX_CLKREG(0x8414) -#define S5PC100_INFORM6 S5PC1XX_CLKREG(0x8418) -#define S5PC100_INFORM7 S5PC1XX_CLKREG(0x841C) -#define S5PC100_DCGIDX_MAP0 S5PC1XX_CLKREG(0x8500) -#define S5PC100_DCGIDX_MAP1 S5PC1XX_CLKREG(0x8504) -#define S5PC100_DCGIDX_MAP2 S5PC1XX_CLKREG(0x8508) -#define S5PC100_DCGPERF_MAP0 S5PC1XX_CLKREG(0x850C) -#define S5PC100_DCGPERF_MAP1 S5PC1XX_CLKREG(0x8510) -#define S5PC100_DVCIDX_MAP S5PC1XX_CLKREG(0x8514) -#define S5PC100_FREQ_CPU S5PC1XX_CLKREG(0x8518) -#define S5PC100_FREQ_DPM S5PC1XX_CLKREG(0x851C) -#define S5PC100_DVSEMCLK_EN S5PC1XX_CLKREG(0x8520) -#define S5PC100_APLL_CON_L8 S5PC1XX_CLKREG(0x8600) -#define S5PC100_APLL_CON_L7 S5PC1XX_CLKREG(0x8604) -#define S5PC100_APLL_CON_L6 S5PC1XX_CLKREG(0x8608) -#define S5PC100_APLL_CON_L5 S5PC1XX_CLKREG(0x860C) -#define S5PC100_APLL_CON_L4 S5PC1XX_CLKREG(0x8610) -#define S5PC100_APLL_CON_L3 S5PC1XX_CLKREG(0x8614) -#define S5PC100_APLL_CON_L2 S5PC1XX_CLKREG(0x8618) -#define S5PC100_APLL_CON_L1 S5PC1XX_CLKREG(0x861C) -#define S5PC100_IEM_CONTROL S5PC1XX_CLKREG(0x8620) -#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_CLKREG(0x8700) -#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_CLKREG(0x8704) -#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_CLKREG(0x8708) -#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_CLKREG(0x870C) -#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_CLKREG(0x8710) -#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_CLKREG(0x8714) -#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_CLKREG(0x8718) -#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_CLKREG(0x871C) -#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_CLKREG(0x8724) - -#define S5PC100_SWRESET S5PC1XX_CLKREG(0x100000) -#define S5PC100_OND_SWRESET S5PC1XX_CLKREG(0x100008) -#define S5PC100_GEN_CTRL S5PC1XX_CLKREG(0x100100) -#define S5PC100_GEN_STATUS S5PC1XX_CLKREG(0x100104) -#define S5PC100_MEM_SYS_CFG S5PC1XX_CLKREG(0x100200) -#define S5PC100_CAM_MUX_SEL S5PC1XX_CLKREG(0x100300) -#define S5PC100_MIXER_OUT_SEL S5PC1XX_CLKREG(0x100304) -#define S5PC100_LPMP_MODE_SEL S5PC1XX_CLKREG(0x100308) -#define S5PC100_MIPI_PHY_CON0 S5PC1XX_CLKREG(0x100400) -#define S5PC100_MIPI_PHY_CON1 S5PC1XX_CLKREG(0x100414) -#define S5PC100_HDMI_PHY_CON0 S5PC1XX_CLKREG(0x100420) - -#define S5PC100_CFG_WFI_CLEAN (~(3<<5)) -#define S5PC100_CFG_WFI_IDLE (1<<5) -#define S5PC100_CFG_WFI_STOP (2<<5) -#define S5PC100_CFG_WFI_SLEEP (3<<5) - +#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000) +#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008) +#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100) +#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104) +#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200) +#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300) +#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304) +#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308) +#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400) +#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414) +#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420) + +#define S5PC100_SWRESET_RESETVAL 0xc100 #define S5PC100_OTHER_SYS_INT 24 #define S5PC100_OTHER_STA_TYPE 23 #define STA_TYPE_EXPON 0 #define STA_TYPE_SFR 1 -#define S5PC100_PWR_STA_EXP_SCALE 0 -#define S5PC100_PWR_STA_CNT 4 - -#define S5PC100_PWR_STABLE_COUNT 85500 - #define S5PC100_SLEEP_CFG_OSC_EN 0 /* OTHERS Resgister */ -#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16) +#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16) #define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28) /* MIPI D-PHY Control Register 0 */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h new file mode 100644 index 00000000000..43c7bc8bf78 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min <bhmin@samsung.com> + * + * S5PC1XX - GPIO register definitions + */ + +#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H +#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +/* S5PC100 */ +#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO +#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000) +#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020) +#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040) +#define S5PC100_GPC_BASE (S5PC100_GPIO_BASE + 0x0060) +#define S5PC100_GPD_BASE (S5PC100_GPIO_BASE + 0x0080) +#define S5PC100_GPE0_BASE (S5PC100_GPIO_BASE + 0x00A0) +#define S5PC100_GPE1_BASE (S5PC100_GPIO_BASE + 0x00C0) +#define S5PC100_GPF0_BASE (S5PC100_GPIO_BASE + 0x00E0) +#define S5PC100_GPF1_BASE (S5PC100_GPIO_BASE + 0x0100) +#define S5PC100_GPF2_BASE (S5PC100_GPIO_BASE + 0x0120) +#define S5PC100_GPF3_BASE (S5PC100_GPIO_BASE + 0x0140) +#define S5PC100_GPG0_BASE (S5PC100_GPIO_BASE + 0x0160) +#define S5PC100_GPG1_BASE (S5PC100_GPIO_BASE + 0x0180) +#define S5PC100_GPG2_BASE (S5PC100_GPIO_BASE + 0x01A0) +#define S5PC100_GPG3_BASE (S5PC100_GPIO_BASE + 0x01C0) +#define S5PC100_GPH0_BASE (S5PC100_GPIO_BASE + 0x0C00) +#define S5PC100_GPH1_BASE (S5PC100_GPIO_BASE + 0x0C20) +#define S5PC100_GPH2_BASE (S5PC100_GPIO_BASE + 0x0C40) +#define S5PC100_GPH3_BASE (S5PC100_GPIO_BASE + 0x0C60) +#define S5PC100_GPI_BASE (S5PC100_GPIO_BASE + 0x01E0) +#define S5PC100_GPJ0_BASE (S5PC100_GPIO_BASE + 0x0200) +#define S5PC100_GPJ1_BASE (S5PC100_GPIO_BASE + 0x0220) +#define S5PC100_GPJ2_BASE (S5PC100_GPIO_BASE + 0x0240) +#define S5PC100_GPJ3_BASE (S5PC100_GPIO_BASE + 0x0260) +#define S5PC100_GPJ4_BASE (S5PC100_GPIO_BASE + 0x0280) +#define S5PC100_GPK0_BASE (S5PC100_GPIO_BASE + 0x02A0) +#define S5PC100_GPK1_BASE (S5PC100_GPIO_BASE + 0x02C0) +#define S5PC100_GPK2_BASE (S5PC100_GPIO_BASE + 0x02E0) +#define S5PC100_GPK3_BASE (S5PC100_GPIO_BASE + 0x0300) +#define S5PC100_GPL0_BASE (S5PC100_GPIO_BASE + 0x0320) +#define S5PC100_GPL1_BASE (S5PC100_GPIO_BASE + 0x0340) +#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360) +#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380) +#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0) +#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00) + +#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68) +#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80) + +/* PDNEN */ +#define S5PC100_PDNEN_CFG_PDNEN (1 << 1) +#define S5PC100_PDNEN_CFG_AUTO (0 << 1) +#define S5PC100_PDNEN_POWERDOWN (1 << 0) +#define S5PC100_PDNEN_NORMAL (0 << 0) + +/* Common part */ +/* External interrupt base is same at both s5pc100 and s5pc110 */ +#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE) + +#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) +#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4)) + +#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */ + diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h new file mode 100644 index 00000000000..02ffa491b53 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h @@ -0,0 +1,84 @@ +/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h + * + * Copyright 2009 Samsung Electronics Co. + * Jongse Won <jongse.won@samsung.com> + * + * S5PC1XX clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_REGS_PWR +#define __ASM_ARM_REGS_PWR __FILE__ + +#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x)) + +/* s5pc100 (0xE0108000) register for power management */ +#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0) +#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4) +#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10) +#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14) +#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18) +#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C) +#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100) +#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104) +#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108) +#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110) +#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114) +#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200) +#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300) +#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304) +#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308) +#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400) +#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404) +#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408) +#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C) +#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410) +#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414) +#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418) +#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C) +#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500) +#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504) +#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508) +#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C) +#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510) +#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514) +#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518) +#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C) +#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520) +#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600) +#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604) +#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608) +#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C) +#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610) +#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614) +#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618) +#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C) +#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620) +#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700) +#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704) +#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708) +#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C) +#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710) +#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714) +#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718) +#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C) +#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724) + +/* PWR_CFG */ +#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31) +#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5) +#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5) +#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5) +#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5) +#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5) + +/* SLEEP_CFG */ +#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0) + +/* OTHERS */ +#define S5PC100_PMU_INT_DISABLE (1 << 24) + +#endif /* __ASM_ARM_REGS_PWR */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h index 45e27513166..2531f34a56f 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h +++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h @@ -35,10 +35,9 @@ extern struct clk clk_hpll; extern struct clk clk_hd0; extern struct clk clk_pd0; extern struct clk clk_54m; -extern struct clk clk_dout_mpll2; extern void s5pc1xx_register_clocks(void); -extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable); -extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable); +extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable); +extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable); /* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */ extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[]; diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c new file mode 100644 index 00000000000..373122f57d5 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/irq-eint.c @@ -0,0 +1,281 @@ +/* + * linux/arch/arm/plat-s5pc1xx/irq-eint.c + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min <bhmin@samsung.com> + * Kyungin Park <kyungmin.park@samsung.com> + * + * Based on plat-s3c64xx/irq-eint.c + * + * S5PC1XX - Interrupt handling for IRQ_EINT(x) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/pm.h> +#include <linux/gpio.h> + +#include <asm/hardware/vic.h> + +#include <mach/map.h> + +#include <plat/gpio-cfg.h> +#include <plat/gpio-ext.h> +#include <plat/pm.h> +#include <plat/regs-gpio.h> +#include <plat/regs-irqtype.h> + +/* + * bank is a group of external interrupt + * bank0 means EINT0 ... EINT7 + * bank1 means EINT8 ... EINT15 + * bank2 means EINT16 ... EINT23 + * bank3 means EINT24 ... EINT31 + */ + +static inline int s3c_get_eint(unsigned int irq) +{ + int real; + + if (irq < IRQ_EINT16_31) + real = (irq - IRQ_EINT0); + else + real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0; + + return real; +} + +static inline int s3c_get_bank(unsigned int irq) +{ + return s3c_get_eint(irq) >> 3; +} + +static inline int s3c_eint_to_bit(unsigned int irq) +{ + int real, bit; + + real = s3c_get_eint(irq); + bit = 1 << (real & (8 - 1)); + + return bit; +} + +static inline void s3c_irq_eint_mask(unsigned int irq) +{ + u32 mask; + u32 bank = s3c_get_bank(irq); + + mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank)); + mask |= s3c_eint_to_bit(irq); + __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank)); +} + +static void s3c_irq_eint_unmask(unsigned int irq) +{ + u32 mask; + u32 bank = s3c_get_bank(irq); + + mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank)); + mask &= ~(s3c_eint_to_bit(irq)); + __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank)); +} + +static inline void s3c_irq_eint_ack(unsigned int irq) +{ + u32 bank = s3c_get_bank(irq); + + __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank)); +} + +static void s3c_irq_eint_maskack(unsigned int irq) +{ + /* compiler should in-line these */ + s3c_irq_eint_mask(irq); + s3c_irq_eint_ack(irq); +} + +static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) +{ + u32 bank = s3c_get_bank(irq); + int real = s3c_get_eint(irq); + int gpio, shift, sfn; + u32 ctrl, con = 0; + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No edge setting!\n"); + break; + + case IRQ_TYPE_EDGE_RISING: + con = S5PC1XX_WKUP_INT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + con = S5PC1XX_WKUP_INT_FALLEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + con = S5PC1XX_WKUP_INT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + con = S5PC1XX_WKUP_INT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + con = S5PC1XX_WKUP_INT_HILEV; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + gpio = real & (8 - 1); + shift = gpio << 2; + + ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank)); + ctrl &= ~(0x7 << shift); + ctrl |= con << shift; + __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank)); + + switch (real) { + case 0 ... 7: + gpio = S5PC100_GPH0(gpio); + break; + case 8 ... 15: + gpio = S5PC100_GPH1(gpio); + break; + case 16 ... 23: + gpio = S5PC100_GPH2(gpio); + break; + case 24 ... 31: + gpio = S5PC100_GPH3(gpio); + break; + default: + return -EINVAL; + } + + sfn = S3C_GPIO_SFN(0x2); + s3c_gpio_cfgpin(gpio, sfn); + + return 0; +} + +static struct irq_chip s3c_irq_eint = { + .name = "EINT", + .mask = s3c_irq_eint_mask, + .unmask = s3c_irq_eint_unmask, + .mask_ack = s3c_irq_eint_maskack, + .ack = s3c_irq_eint_ack, + .set_type = s3c_irq_eint_set_type, + .set_wake = s3c_irqext_wake, +}; + +/* s3c_irq_demux_eint + * + * This function demuxes the IRQ from external interrupts, + * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into + * the specific handlers s3c_irq_demux_eintX_Y. + */ +static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) +{ + u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3))); + u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3))); + unsigned int irq; + + status &= ~mask; + status &= (1 << (end - start + 1)) - 1; + + for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { + if (status & 1) + generic_handle_irq(irq); + + status >>= 1; + } +} + +static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(16, 23); + s3c_irq_demux_eint(24, 31); +} + +/* + * Handle EINT0 ... EINT15 at VIC directly + */ +static void s3c_irq_vic_eint_mask(unsigned int irq) +{ + void __iomem *base = get_irq_chip_data(irq); + unsigned int real; + + s3c_irq_eint_mask(irq); + real = s3c_get_eint(irq); + writel(1 << real, base + VIC_INT_ENABLE_CLEAR); +} + +static void s3c_irq_vic_eint_unmask(unsigned int irq) +{ + void __iomem *base = get_irq_chip_data(irq); + unsigned int real; + + s3c_irq_eint_unmask(irq); + real = s3c_get_eint(irq); + writel(1 << real, base + VIC_INT_ENABLE); +} + +static inline void s3c_irq_vic_eint_ack(unsigned int irq) +{ + u32 bit; + u32 bank = s3c_get_bank(irq); + + bit = s3c_eint_to_bit(irq); + __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank)); +} + +static void s3c_irq_vic_eint_maskack(unsigned int irq) +{ + /* compiler should in-line these */ + s3c_irq_vic_eint_mask(irq); + s3c_irq_vic_eint_ack(irq); +} + +static struct irq_chip s3c_irq_vic_eint = { + .name = "EINT", + .mask = s3c_irq_vic_eint_mask, + .unmask = s3c_irq_vic_eint_unmask, + .mask_ack = s3c_irq_vic_eint_maskack, + .ack = s3c_irq_vic_eint_ack, + .set_type = s3c_irq_eint_set_type, + .set_wake = s3c_irqext_wake, +}; + +static int __init s5pc1xx_init_irq_eint(void) +{ + int irq; + + for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) { + set_irq_chip(irq, &s3c_irq_vic_eint); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { + set_irq_chip(irq, &s3c_irq_eint); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31); + + return 0; +} + +arch_initcall(s5pc1xx_init_irq_eint); diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c new file mode 100644 index 00000000000..fecca7a679b --- /dev/null +++ b/arch/arm/plat-s5pc1xx/irq-gpio.c @@ -0,0 +1,266 @@ +/* + * arch/arm/plat-s5pc1xx/irq-gpio.c + * + * Copyright (C) 2009 Samsung Electronics + * + * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> +#include <plat/gpio-cfg.h> + +#define S5PC1XX_GPIOREG(x) (S5PC1XX_VA_GPIO + (x)) + +#define CON_OFFSET 0x700 +#define MASK_OFFSET 0x900 +#define PEND_OFFSET 0xA00 +#define CON_OFFSET_2 0xE00 +#define MASK_OFFSET_2 0xF00 +#define PEND_OFFSET_2 0xF40 + +#define GPIOINT_LEVEL_LOW 0x0 +#define GPIOINT_LEVEL_HIGH 0x1 +#define GPIOINT_EDGE_FALLING 0x2 +#define GPIOINT_EDGE_RISING 0x3 +#define GPIOINT_EDGE_BOTH 0x4 + +static int group_to_con_offset(int group) +{ + return group << 2; +} + +static int group_to_mask_offset(int group) +{ + return group << 2; +} + +static int group_to_pend_offset(int group) +{ + return group << 2; +} + +static int s5pc1xx_get_start(unsigned int group) +{ + switch (group) { + case 0: return S5PC100_GPIO_A0_START; + case 1: return S5PC100_GPIO_A1_START; + case 2: return S5PC100_GPIO_B_START; + case 3: return S5PC100_GPIO_C_START; + case 4: return S5PC100_GPIO_D_START; + case 5: return S5PC100_GPIO_E0_START; + case 6: return S5PC100_GPIO_E1_START; + case 7: return S5PC100_GPIO_F0_START; + case 8: return S5PC100_GPIO_F1_START; + case 9: return S5PC100_GPIO_F2_START; + case 10: return S5PC100_GPIO_F3_START; + case 11: return S5PC100_GPIO_G0_START; + case 12: return S5PC100_GPIO_G1_START; + case 13: return S5PC100_GPIO_G2_START; + case 14: return S5PC100_GPIO_G3_START; + case 15: return S5PC100_GPIO_I_START; + case 16: return S5PC100_GPIO_J0_START; + case 17: return S5PC100_GPIO_J1_START; + case 18: return S5PC100_GPIO_J2_START; + case 19: return S5PC100_GPIO_J3_START; + case 20: return S5PC100_GPIO_J4_START; + default: + BUG(); + } + + return -EINVAL; +} + +static int s5pc1xx_get_group(unsigned int irq) +{ + irq -= S3C_IRQ_GPIO(0); + + switch (irq) { + case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1: + return 0; + case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1: + return 1; + case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1: + return 2; + case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1: + return 3; + case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1: + return 4; + case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1: + return 5; + case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1: + return 6; + case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1: + return 7; + case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1: + return 8; + case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1: + return 9; + case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1: + return 10; + case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1: + return 11; + case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1: + return 12; + case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1: + return 13; + case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1: + return 14; + case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1: + return 15; + case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1: + return 16; + case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1: + return 17; + case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1: + return 18; + case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1: + return 19; + case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1: + return 20; + default: + BUG(); + } + + return -EINVAL; +} + +static int s5pc1xx_get_offset(unsigned int irq) +{ + struct gpio_chip *chip = get_irq_data(irq); + return irq - S3C_IRQ_GPIO(chip->base); +} + +static void s5pc1xx_gpioint_ack(unsigned int irq) +{ + int group, offset, pend_offset; + unsigned int value; + + group = s5pc1xx_get_group(irq); + offset = s5pc1xx_get_offset(irq); + pend_offset = group_to_pend_offset(group); + + value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + value |= 1 << offset; + __raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); +} + +static void s5pc1xx_gpioint_mask(unsigned int irq) +{ + int group, offset, mask_offset; + unsigned int value; + + group = s5pc1xx_get_group(irq); + offset = s5pc1xx_get_offset(irq); + mask_offset = group_to_mask_offset(group); + + value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + value |= 1 << offset; + __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); +} + +static void s5pc1xx_gpioint_unmask(unsigned int irq) +{ + int group, offset, mask_offset; + unsigned int value; + + group = s5pc1xx_get_group(irq); + offset = s5pc1xx_get_offset(irq); + mask_offset = group_to_mask_offset(group); + + value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + value &= ~(1 << offset); + __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); +} + +static void s5pc1xx_gpioint_mask_ack(unsigned int irq) +{ + s5pc1xx_gpioint_mask(irq); + s5pc1xx_gpioint_ack(irq); +} + +static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type) +{ + int group, offset, con_offset; + unsigned int value; + + group = s5pc1xx_get_group(irq); + offset = s5pc1xx_get_offset(irq); + con_offset = group_to_con_offset(group); + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No irq type\n"); + return -EINVAL; + case IRQ_TYPE_EDGE_RISING: + type = GPIOINT_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + type = GPIOINT_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + type = GPIOINT_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + type = GPIOINT_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + type = GPIOINT_LEVEL_LOW; + break; + default: + BUG(); + } + + + value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset); + value &= ~(0xf << (offset * 0x4)); + value |= (type << (offset * 0x4)); + __raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset); + + return 0; +} + +struct irq_chip s5pc1xx_gpioint = { + .name = "GPIO", + .ack = s5pc1xx_gpioint_ack, + .mask = s5pc1xx_gpioint_mask, + .mask_ack = s5pc1xx_gpioint_mask_ack, + .unmask = s5pc1xx_gpioint_unmask, + .set_type = s5pc1xx_gpioint_set_type, +}; + +void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) +{ + int group, offset, pend_offset, mask_offset; + int real_irq, group_end; + unsigned int pend, mask; + + group_end = 21; + + for (group = 0; group < group_end; group++) { + pend_offset = group_to_pend_offset(group); + pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + if (!pend) + continue; + + mask_offset = group_to_mask_offset(group); + mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + pend &= ~mask; + + for (offset = 0; offset < 8; offset++) { + if (pend & (1 << offset)) { + real_irq = s5pc1xx_get_start(group) + offset; + generic_handle_irq(S3C_IRQ_GPIO(real_irq)); + } + } + } +} diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c index 80d6dd942cb..e44fd04ef33 100644 --- a/arch/arm/plat-s5pc1xx/irq.c +++ b/arch/arm/plat-s5pc1xx/irq.c @@ -79,7 +79,7 @@ static void s3c_irq_timer_ack(unsigned int irq) { u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - reg &= 0x1f; + reg &= 0x1f; /* mask out pending interrupts */ reg |= (1 << 5) << (irq - IRQ_TIMER0); __raw_writel(reg, S3C64XX_TINT_CSTAT); } diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c index 6b24035172f..b436d44510c 100644 --- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c +++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c @@ -49,6 +49,7 @@ static struct clk clk_ext_xtal_mux = { #define clk_fin_hpll clk_ext_xtal_mux #define clk_fout_mpll clk_mpll +#define clk_vclk_54m clk_54m struct clk_sources { unsigned int nr_sources; @@ -67,746 +68,327 @@ struct clksrc_clk { void __iomem *reg_source; }; -static int clk_default_setrate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 1; -} - -struct clk clk_27m = { - .name = "clk_27m", +/* APLL */ +static struct clk clk_fout_apll = { + .name = "fout_apll", .id = -1, .rate = 27000000, }; -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; +static struct clk *clk_src_apll_list[] = { + [0] = &clk_fin_apll, + [1] = &clk_fout_apll, +}; + +static struct clk_sources clk_src_apll = { + .sources = clk_src_apll_list, + .nr_sources = ARRAY_SIZE(clk_src_apll_list), +}; - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .shift = S5PC100_CLKSRC0_APLL_SHIFT, + .mask = S5PC100_CLKSRC0_APLL_MASK, + .sources = &clk_src_apll, + .reg_source = S5PC100_CLKSRC0, +}; - val = __raw_readl(S5PC1XX_CLK_SRC1); - if (enable) - val |= S5PC100_CLKSRC1_CLK48M_MASK; - else - val &= ~S5PC100_CLKSRC1_CLK48M_MASK; +static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; - __raw_writel(val, S5PC1XX_CLK_SRC1); - local_irq_restore(flags); + ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK; + ratio >>= S5PC100_CLKDIV0_APLL_SHIFT; - return 0; + return rate / (ratio + 1); } -struct clk clk_48m = { - .name = "clk_48m", +static struct clk clk_dout_apll = { + .name = "dout_apll", .id = -1, - .rate = 48000000, - .enable = clk_48m_ctrl, + .parent = &clk_mout_apll.clk, + .get_rate = s5pc100_clk_dout_apll_get_rate, }; -struct clk clk_54m = { - .name = "clk_54m", - .id = -1, - .rate = 54000000, -}; - -struct clk clk_hpll = { - .name = "hpll", - .id = -1, -}; +static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; -struct clk clk_hd0 = { - .name = "hclkd0", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .set_rate = clk_default_setrate, -}; + ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK; + ratio >>= S5PC100_CLKDIV0_ARM_SHIFT; -struct clk clk_pd0 = { - .name = "pclkd0", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .set_rate = clk_default_setrate, -}; + return rate / (ratio + 1); +} -static int s5pc1xx_clk_gate(void __iomem *reg, - struct clk *clk, - int enable) +static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk, + unsigned long rate) { - unsigned int ctrlbit = clk->ctrlbit; - u32 con; + unsigned long parent = clk_get_rate(clk->parent); + u32 div; - con = __raw_readl(reg); + if (parent < rate) + return rate; - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; + div = (parent / rate) - 1; + if (div > S5PC100_CLKDIV0_ARM_MASK) + div = S5PC100_CLKDIV0_ARM_MASK; - __raw_writel(con, reg); - return 0; + return parent / (div + 1); } -static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable) +static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate) { - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable); -} + unsigned long parent = clk_get_rate(clk->parent); + u32 div; + u32 val; -static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable); -} + if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1)) + return -EINVAL; -static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable); -} + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; -static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable); -} + val = __raw_readl(S5PC100_CLKDIV0); + val &= S5PC100_CLKDIV0_ARM_MASK; + val |= (div - 1); + __raw_writel(val, S5PC100_CLKDIV0); -static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable); + return 0; } -static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable); -} +static struct clk clk_arm = { + .name = "armclk", + .id = -1, + .parent = &clk_dout_apll, + .get_rate = s5pc100_clk_arm_get_rate, + .set_rate = s5pc100_clk_arm_set_rate, + .round_rate = s5pc100_clk_arm_round_rate, +}; -static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable) +static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk) { - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable); -} + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; -static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable); -} + ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK; + ratio >>= S5PC100_CLKDIV0_D0_SHIFT; -static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable); + return rate / (ratio + 1); } -static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable); -} +static struct clk clk_dout_d0_bus = { + .name = "dout_d0_bus", + .id = -1, + .parent = &clk_arm, + .get_rate = s5pc100_clk_dout_d0_bus_get_rate, +}; -int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable) +static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk) { - return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable); + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; + + ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK; + ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT; + + return rate / (ratio + 1); } -int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable) +static struct clk clk_dout_pclkd0 = { + .name = "dout_pclkd0", + .id = -1, + .parent = &clk_dout_d0_bus, + .get_rate = s5pc100_clk_dout_pclkd0_get_rate, +}; + +static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk) { - return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable); + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; + + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK; + ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT; + + return rate / (ratio + 1); } -static struct clk init_clocks_disable[] = { - { - .name = "dsi", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_DSI, - }, { - .name = "csi", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_CSI, - }, { - .name = "ccan0", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_CCAN0, - }, { - .name = "ccan1", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_CCAN1, - }, { - .name = "keypad", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, - }, { - .name = "hclkd2", - .id = -1, - .parent = NULL, - .enable = s5pc1xx_clk_d20_ctrl, - .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2, - }, { - .name = "iis-d2", - .id = -1, - .parent = NULL, - .enable = s5pc1xx_clk_d20_ctrl, - .ctrlbit = S5PC100_CLKGATE_D20_I2SD2, - }, { - .name = "otg", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_USBOTG, - }, +static struct clk clk_dout_apll2 = { + .name = "dout_apll2", + .id = -1, + .parent = &clk_mout_apll.clk, + .get_rate = s5pc100_clk_dout_apll2_get_rate, }; -static struct clk init_clocks[] = { - /* System1 (D0_0) devices */ - { - .name = "intc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_INTC, - }, { - .name = "tzic", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_TZIC, - }, { - .name = "cf-ata", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_CFCON, - }, { - .name = "mdma", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_MDMA, - }, { - .name = "g2d", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_G2D, - }, { - .name = "secss", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_SECSS, - }, { - .name = "cssys", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_CSSYS, - }, +/* MPLL */ +static struct clk *clk_src_mpll_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_fout_mpll, +}; - /* Memory (D0_1) devices */ - { - .name = "dmc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_DMC, - }, { - .name = "sromc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_SROMC, - }, { - .name = "onenand", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_ONENAND, - }, { - .name = "nand", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_NFCON, - }, { - .name = "intmem", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_INTMEM, - }, { - .name = "ebi", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_EBI, - }, +static struct clk_sources clk_src_mpll = { + .sources = clk_src_mpll_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_list), +}; - /* System2 (D0_2) devices */ - { - .name = "seckey", - .id = -1, - .parent = &clk_pd0, - .enable = s5pc1xx_clk_d02_ctrl, - .ctrlbit = S5PC100_CLKGATE_D02_SECKEY, - }, { - .name = "sdm", +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", .id = -1, - .parent = &clk_hd0, - .enable = s5pc1xx_clk_d02_ctrl, - .ctrlbit = S5PC100_CLKGATE_D02_SDM, }, + .shift = S5PC100_CLKSRC0_MPLL_SHIFT, + .mask = S5PC100_CLKSRC0_MPLL_MASK, + .sources = &clk_src_mpll, + .reg_source = S5PC100_CLKSRC0, +}; - /* File (D1_0) devices */ - { - .name = "pdma0", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_PDMA0, - }, { - .name = "pdma1", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_PDMA1, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_USBHOST, - }, { - .name = "modem", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_h, - .enable = s5pc1xx_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2, - }, +static struct clk *clkset_am_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_dout_apll2, +}; - /* Multimedia1 (D1_1) devices */ - { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_LCD, - }, { - .name = "rotator", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR, - }, { - .name = "fimc", - .id = 0, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC0, - }, { - .name = "fimc", - .id = 1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC1, - }, { - .name = "fimc", - .id = 2, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC2, - }, { - .name = "jpeg", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_JPEG, - }, { - .name = "g3d", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_G3D, - }, +static struct clk_sources clk_src_am = { + .sources = clkset_am_list, + .nr_sources = ARRAY_SIZE(clkset_am_list), +}; - /* Multimedia2 (D1_2) devices */ - { - .name = "tv", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_TV, - }, { - .name = "vp", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_VP, - }, { - .name = "mixer", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_MIXER, - }, { - .name = "hdmi", - .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_HDMI, - }, { - .name = "mfc", +static struct clksrc_clk clk_mout_am = { + .clk = { + .name = "mout_am", .id = -1, - .parent = &clk_h, - .enable = s5pc1xx_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_MFC, }, + .shift = S5PC100_CLKSRC0_AMMUX_SHIFT, + .mask = S5PC100_CLKSRC0_AMMUX_MASK, + .sources = &clk_src_am, + .reg_source = S5PC100_CLKSRC0, +}; - /* System (D1_3) devices */ - { - .name = "chipid", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_CHIPID, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_GPIO, - }, { - .name = "apc", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_APC, - }, { - .name = "iec", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_IEC, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_PWM, - }, { - .name = "systimer", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_WDT, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_RTC, - }, +static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; - /* Connectivity (D1_4) devices */ - { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART3, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_IIC, - }, { - .name = "hdmi-i2c", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC, - }, { - .name = "spi", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI1, - }, { - .name = "spi", - .id = 2, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI2, - }, { - .name = "irda", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_IRDA, - }, { - .name = "hsitx", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HSITX, - }, { - .name = "hsirx", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HSIRX, - }, + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - /* Audio (D1_5) devices */ - { - .name = "iis", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS0, - }, { - .name = "iis", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS1, - }, { - .name = "iis", - .id = 2, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS2, - }, { - .name = "ac97", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_AC97, - }, { - .name = "pcm", - .id = 0, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_PCM0, - }, { - .name = "pcm", - .id = 1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_PCM1, - }, { - .name = "spdif", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_SPDIF, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_TSADC, - }, { - .name = "keyif", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, - }, { - .name = "cg", - .id = -1, - .parent = &clk_p, - .enable = s5pc1xx_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_CG, - }, + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK; + ratio >>= S5PC100_CLKDIV1_D1_SHIFT; - /* Audio (D2_0) devices: all disabled */ + return rate / (ratio + 1); +} - /* Special Clocks 1 */ - { - .name = "sclk_hpm", - .id = -1, - .parent = NULL, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC1XX_CLKGATE_SCLK0_HPM, - }, { - .name = "sclk_onenand", - .id = -1, - .parent = NULL, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND, - }, { - .name = "sclk_spi_48", - .id = 0, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48, - }, { - .name = "sclk_spi_48", - .id = 1, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48, - }, { - .name = "sclk_spi_48", - .id = 2, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48, - }, { - .name = "sclk_mmc_48", - .id = 0, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48, - }, { - .name = "sclk_mmc_48", - .id = 1, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48, - }, { - .name = "sclk_mmc_48", - .id = 2, - .parent = &clk_48m, - .enable = s5pc1xx_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48, - }, +static struct clk clk_dout_d1_bus = { + .name = "dout_d1_bus", + .id = -1, + .parent = &clk_mout_am.clk, + .get_rate = s5pc100_clk_dout_d1_bus_get_rate, +}; - /* Special Clocks 2 */ - { - .name = "sclk_tv_54", - .id = -1, - .parent = &clk_54m, - .enable = s5pc1xx_sclk1_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK1_TV54, - }, { - .name = "sclk_vdac_54", - .id = -1, - .parent = &clk_54m, - .enable = s5pc1xx_sclk1_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK1_VDAC54, - }, { - .name = "sclk_spdif", +static struct clk *clkset_onenand_list[] = { + [0] = &clk_dout_d0_bus, + [1] = &clk_dout_d1_bus, +}; + +static struct clk_sources clk_src_onenand = { + .sources = clkset_onenand_list, + .nr_sources = ARRAY_SIZE(clkset_onenand_list), +}; + +static struct clksrc_clk clk_mout_onenand = { + .clk = { + .name = "mout_onenand", .id = -1, - .parent = NULL, - .enable = s5pc1xx_sclk1_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK1_SPDIF, }, + .shift = S5PC100_CLKSRC0_ONENAND_SHIFT, + .mask = S5PC100_CLKSRC0_ONENAND_MASK, + .sources = &clk_src_onenand, + .reg_source = S5PC100_CLKSRC0, }; -void __init s5pc1xx_register_clocks(void) +static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk) { - struct clk *clkp; - int ret; - int ptr; + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK; + ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT; - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } + return rate / (ratio + 1); +} - (clkp->enable)(clkp, 0); - } +static struct clk clk_dout_pclkd1 = { + .name = "dout_pclkd1", + .id = -1, + .parent = &clk_dout_d1_bus, + .get_rate = s5pc100_clk_dout_pclkd1_get_rate, +}; + +static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; + + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK; + ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT; - s3c_pwmclk_init(); + return rate / (ratio + 1); } -static struct clk clk_fout_apll = { - .name = "fout_apll", + +static struct clk clk_dout_mpll2 = { + .name = "dout_mpll2", .id = -1, + .parent = &clk_mout_am.clk, + .get_rate = s5pc100_clk_dout_mpll2_get_rate, }; -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; +static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; -static struct clk_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK; + ratio >>= S5PC100_CLKDIV1_CAM_SHIFT; + + return rate / (ratio + 1); +} + +static struct clk clk_dout_cam = { + .name = "dout_cam", + .id = -1, + .parent = &clk_dout_mpll2, + .get_rate = s5pc100_clk_dout_cam_get_rate, }; -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .shift = S5PC1XX_CLKSRC0_APLL_SHIFT, - .mask = S5PC1XX_CLKSRC0_APLL_MASK, - .sources = &clk_src_apll, - .reg_source = S5PC1XX_CLK_SRC0, +static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned int ratio; + + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK; + ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT; + + return rate / (ratio + 1); +} + +static struct clk clk_dout_mpll = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_am.clk, + .get_rate = s5pc100_clk_dout_mpll_get_rate, }; +/* EPLL */ static struct clk clk_fout_epll = { .name = "fout_epll", .id = -1, @@ -827,91 +409,57 @@ static struct clksrc_clk clk_mout_epll = { .name = "mout_epll", .id = -1, }, - .shift = S5PC1XX_CLKSRC0_EPLL_SHIFT, - .mask = S5PC1XX_CLKSRC0_EPLL_MASK, + .shift = S5PC100_CLKSRC0_EPLL_SHIFT, + .mask = S5PC100_CLKSRC0_EPLL_MASK, .sources = &clk_src_epll, - .reg_source = S5PC1XX_CLK_SRC0, + .reg_source = S5PC100_CLKSRC0, }; -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clk_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .shift = S5PC1XX_CLKSRC0_MPLL_SHIFT, - .mask = S5PC1XX_CLKSRC0_MPLL_MASK, - .sources = &clk_src_mpll, - .reg_source = S5PC1XX_CLK_SRC0, -}; - -static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK; - rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1; - - return rate; -} - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", +/* HPLL */ +static struct clk clk_fout_hpll = { + .name = "fout_hpll", .id = -1, - .parent = &clk_mout_mpll.clk, - .get_rate = s5pc1xx_clk_doutmpll_get_rate, }; -static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK; - rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1; - - return rate; -} - -struct clk clk_dout_mpll2 = { - .name = "dout_mpll2", - .id = -1, - .parent = &clk_mout_mpll.clk, - .get_rate = s5pc1xx_clk_doutmpll2_get_rate, +static struct clk *clk_src_hpll_list[] = { + [0] = &clk_27m, + [1] = &clk_fout_hpll, }; -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - NULL +static struct clk_sources clk_src_hpll = { + .sources = clk_src_hpll_list, + .nr_sources = ARRAY_SIZE(clk_src_hpll_list), }; -static struct clk_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), +static struct clksrc_clk clk_mout_hpll = { + .clk = { + .name = "mout_hpll", + .id = -1, + }, + .shift = S5PC100_CLKSRC0_HPLL_SHIFT, + .mask = S5PC100_CLKSRC0_HPLL_MASK, + .sources = &clk_src_hpll, + .reg_source = S5PC100_CLKSRC0, }; +/* Peripherals */ +/* + * The peripheral clocks are all controlled via clocksource followed + * by an optional divider and gate stage. We currently roll this into + * one clock which hides the intermediate clock from the mux. + * + * Note, the JPEG clock can only be an even divider... + * + * The scaler and LCD clocks depend on the S5PC100 version, and also + * have a common parent divisor so are not included here. + */ + static inline struct clksrc_clk *to_clksrc(struct clk *clk) { return container_of(clk, struct clksrc_clk, clk); } -static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk) +static unsigned long s5pc100_getrate_clksrc(struct clk *clk) { struct clksrc_clk *sclk = to_clksrc(clk); unsigned long rate = clk_get_rate(clk->parent); @@ -925,7 +473,7 @@ static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk) return rate; } -static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate) +static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate) { struct clksrc_clk *sclk = to_clksrc(clk); void __iomem *reg = sclk->reg_divider; @@ -938,14 +486,14 @@ static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate) return -EINVAL; val = __raw_readl(reg); - val &= ~(0xf << sclk->shift); - val |= (div - 1) << sclk->shift; + val &= ~(0xf << sclk->divider_shift); + val |= (div - 1) << sclk->divider_shift; __raw_writel(val, reg); return 0; } -static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent) +static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent) { struct clksrc_clk *sclk = to_clksrc(clk); struct clk_sources *srcs = sclk->sources; @@ -970,7 +518,7 @@ static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent) return -EINVAL; } -static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk, +static unsigned long s5pc100_roundrate_clksrc(struct clk *clk, unsigned long rate) { unsigned long parent_rate = clk_get_rate(clk->parent); @@ -992,35 +540,466 @@ static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk, return rate; } +static struct clk *clkset_spi_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll2, + &clk_fin_epll, + &clk_mout_hpll.clk, +}; + +static struct clk_sources clkset_spi = { + .sources = clkset_spi_list, + .nr_sources = ARRAY_SIZE(clkset_spi_list), +}; + +static struct clksrc_clk clk_spi0 = { + .clk = { + .name = "spi_bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_SPI0_SHIFT, + .mask = S5PC100_CLKSRC1_SPI0_MASK, + .sources = &clkset_spi, + .divider_shift = S5PC100_CLKDIV2_SPI0_SHIFT, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, +}; + +static struct clksrc_clk clk_spi1 = { + .clk = { + .name = "spi_bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_SPI1_SHIFT, + .mask = S5PC100_CLKSRC1_SPI1_MASK, + .sources = &clkset_spi, + .divider_shift = S5PC100_CLKDIV2_SPI1_SHIFT, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, +}; + +static struct clksrc_clk clk_spi2 = { + .clk = { + .name = "spi_bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_SPI2_SHIFT, + .mask = S5PC100_CLKSRC1_SPI2_MASK, + .sources = &clkset_spi, + .divider_shift = S5PC100_CLKDIV2_SPI2_SHIFT, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, +}; + +static struct clk_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + static struct clksrc_clk clk_uart_uclk1 = { .clk = { .name = "uclk1", .id = -1, .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, - .enable = s5pc1xx_sclk0_ctrl, - .set_parent = s5pc1xx_setparent_clksrc, - .get_rate = s5pc1xx_getrate_clksrc, - .set_rate = s5pc1xx_setrate_clksrc, - .round_rate = s5pc1xx_roundrate_clksrc, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, }, .shift = S5PC100_CLKSRC1_UART_SHIFT, .mask = S5PC100_CLKSRC1_UART_MASK, .sources = &clkset_uart, .divider_shift = S5PC100_CLKDIV2_UART_SHIFT, - .reg_divider = S5PC1XX_CLK_DIV2, - .reg_source = S5PC1XX_CLK_SRC1, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, +}; + +static struct clk clk_iis_cd0 = { + .name = "iis_cdclk0", + .id = -1, +}; + +static struct clk clk_iis_cd1 = { + .name = "iis_cdclk1", + .id = -1, +}; + +static struct clk clk_iis_cd2 = { + .name = "iis_cdclk2", + .id = -1, +}; + +static struct clk clk_pcm_cd0 = { + .name = "pcm_cdclk0", + .id = -1, +}; + +static struct clk clk_pcm_cd1 = { + .name = "pcm_cdclk1", + .id = -1, +}; + +static struct clk *clkset_audio0_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_iis_cd0, + &clk_pcm_cd0, + &clk_mout_hpll.clk, +}; + +static struct clk_sources clkset_audio0 = { + .sources = clkset_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_audio0_list), +}; + +static struct clksrc_clk clk_audio0 = { + .clk = { + .name = "audio-bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC3_AUDIO0_SHIFT, + .mask = S5PC100_CLKSRC3_AUDIO0_MASK, + .sources = &clkset_audio0, + .divider_shift = S5PC100_CLKDIV4_AUDIO0_SHIFT, + .reg_divider = S5PC100_CLKDIV4, + .reg_source = S5PC100_CLKSRC3, +}; + +static struct clk *clkset_audio1_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_iis_cd1, + &clk_pcm_cd1, + &clk_mout_hpll.clk, +}; + +static struct clk_sources clkset_audio1 = { + .sources = clkset_audio1_list, + .nr_sources = ARRAY_SIZE(clkset_audio1_list), +}; + +static struct clksrc_clk clk_audio1 = { + .clk = { + .name = "audio-bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC3_AUDIO1_SHIFT, + .mask = S5PC100_CLKSRC3_AUDIO1_MASK, + .sources = &clkset_audio1, + .divider_shift = S5PC100_CLKDIV4_AUDIO1_SHIFT, + .reg_divider = S5PC100_CLKDIV4, + .reg_source = S5PC100_CLKSRC3, +}; + +static struct clk *clkset_audio2_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_iis_cd2, + &clk_mout_hpll.clk, +}; + +static struct clk_sources clkset_audio2 = { + .sources = clkset_audio2_list, + .nr_sources = ARRAY_SIZE(clkset_audio2_list), +}; + +static struct clksrc_clk clk_audio2 = { + .clk = { + .name = "audio-bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC3_AUDIO2_SHIFT, + .mask = S5PC100_CLKSRC3_AUDIO2_MASK, + .sources = &clkset_audio2, + .divider_shift = S5PC100_CLKDIV4_AUDIO2_SHIFT, + .reg_divider = S5PC100_CLKDIV4, + .reg_source = S5PC100_CLKSRC3, +}; + +static struct clk *clkset_spdif_list[] = { + &clk_audio0.clk, + &clk_audio1.clk, + &clk_audio2.clk, +}; + +static struct clk_sources clkset_spdif = { + .sources = clkset_spdif_list, + .nr_sources = ARRAY_SIZE(clkset_spdif_list), +}; + +static struct clksrc_clk clk_spdif = { + .clk = { + .name = "spdif", + .id = -1, + }, + .shift = S5PC100_CLKSRC3_SPDIF_SHIFT, + .mask = S5PC100_CLKSRC3_SPDIF_MASK, + .sources = &clkset_spdif, + .reg_source = S5PC100_CLKSRC3, +}; + +static struct clk *clkset_lcd_fimc_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_mout_hpll.clk, + &clk_vclk_54m, +}; + +static struct clk_sources clkset_lcd_fimc = { + .sources = clkset_lcd_fimc_list, + .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list), +}; + +static struct clksrc_clk clk_lcd = { + .clk = { + .name = "lcd", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_LCD_SHIFT, + .mask = S5PC100_CLKSRC2_LCD_MASK, + .sources = &clkset_lcd_fimc, + .divider_shift = S5PC100_CLKDIV3_LCD_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_fimc0 = { + .clk = { + .name = "fimc", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_FIMC0_SHIFT, + .mask = S5PC100_CLKSRC2_FIMC0_MASK, + .sources = &clkset_lcd_fimc, + .divider_shift = S5PC100_CLKDIV3_FIMC0_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_fimc1 = { + .clk = { + .name = "fimc", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_FIMC1_SHIFT, + .mask = S5PC100_CLKSRC2_FIMC1_MASK, + .sources = &clkset_lcd_fimc, + .divider_shift = S5PC100_CLKDIV3_FIMC1_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_fimc2 = { + .clk = { + .name = "fimc", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2, + .enable = s5pc100_sclk1_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_FIMC2_SHIFT, + .mask = S5PC100_CLKSRC2_FIMC2_MASK, + .sources = &clkset_lcd_fimc, + .divider_shift = S5PC100_CLKDIV3_FIMC2_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clk *clkset_mmc_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_mout_hpll.clk , +}; + +static struct clk_sources clkset_mmc = { + .sources = clkset_mmc_list, + .nr_sources = ARRAY_SIZE(clkset_mmc_list), +}; + +static struct clksrc_clk clk_mmc0 = { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_MMC0_SHIFT, + .mask = S5PC100_CLKSRC2_MMC0_MASK, + .sources = &clkset_mmc, + .divider_shift = S5PC100_CLKDIV3_MMC0_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_mmc1 = { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_MMC1_SHIFT, + .mask = S5PC100_CLKSRC2_MMC1_MASK, + .sources = &clkset_mmc, + .divider_shift = S5PC100_CLKDIV3_MMC1_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + +static struct clksrc_clk clk_mmc2 = { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC2_MMC2_SHIFT, + .mask = S5PC100_CLKSRC2_MMC2_MASK, + .sources = &clkset_mmc, + .divider_shift = S5PC100_CLKDIV3_MMC2_SHIFT, + .reg_divider = S5PC100_CLKDIV3, + .reg_source = S5PC100_CLKSRC2, +}; + + +static struct clk *clkset_usbhost_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_mout_hpll.clk, + &clk_48m, +}; + +static struct clk_sources clkset_usbhost = { + .sources = clkset_usbhost_list, + .nr_sources = ARRAY_SIZE(clkset_usbhost_list), +}; + +static struct clksrc_clk clk_usbhost = { + .clk = { + .name = "usbhost", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST, + .enable = s5pc100_sclk0_ctrl, + .set_parent = s5pc100_setparent_clksrc, + .get_rate = s5pc100_getrate_clksrc, + .set_rate = s5pc100_setrate_clksrc, + .round_rate = s5pc100_roundrate_clksrc, + }, + .shift = S5PC100_CLKSRC1_UHOST_SHIFT, + .mask = S5PC100_CLKSRC1_UHOST_MASK, + .sources = &clkset_usbhost, + .divider_shift = S5PC100_CLKDIV2_UHOST_SHIFT, + .reg_divider = S5PC100_CLKDIV2, + .reg_source = S5PC100_CLKSRC1, }; /* Clock initialisation code */ static struct clksrc_clk *init_parents[] = { &clk_mout_apll, - &clk_mout_epll, &clk_mout_mpll, + &clk_mout_am, + &clk_mout_onenand, + &clk_mout_epll, + &clk_mout_hpll, + &clk_spi0, + &clk_spi1, + &clk_spi2, &clk_uart_uclk1, + &clk_audio0, + &clk_audio1, + &clk_audio2, + &clk_spdif, + &clk_lcd, + &clk_fimc0, + &clk_fimc1, + &clk_fimc2, + &clk_mmc0, + &clk_mmc1, + &clk_mmc2, + &clk_usbhost, }; -static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk) +static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk) { struct clk_sources *srcs = clk->sources; u32 clksrc = __raw_readl(clk->reg_source); @@ -1036,9 +1015,9 @@ static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk) clk->clk.parent = srcs->sources[clksrc]; - printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", - clk->clk.name, clk->clk.parent->name, clksrc, - clk_get_rate(&clk->clk)); + printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n", + clk->clk.name, clk->clk.parent->name, clksrc, + print_mhz(clk_get_rate(&clk->clk))); } #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) @@ -1052,20 +1031,16 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) unsigned long hclk; unsigned long pclkd0; unsigned long pclk; - unsigned long apll; - unsigned long mpll; - unsigned long hpll; - unsigned long epll; + unsigned long apll, mpll, epll, hpll; unsigned int ptr; u32 clkdiv0, clkdiv1; printk(KERN_DEBUG "%s: registering clocks\n", __func__); - clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0); - clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1); + clkdiv0 = __raw_readl(S5PC100_CLKDIV0); + clkdiv1 = __raw_readl(S5PC100_CLKDIV1); - printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", - __func__, clkdiv0, clkdiv1); + printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1); xtal_clk = clk_get(NULL, "xtal"); BUG_ON(IS_ERR(xtal_clk)); @@ -1075,48 +1050,81 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON)); - mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON)); - epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON)); + apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON)); + mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON)); + epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON)); hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON)); - printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n", - apll, mpll, epll, hpll); + printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz" + ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n", + print_mhz(apll), print_mhz(mpll), + print_mhz(epll), print_mhz(hpll)); - armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL); + armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL); armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM); hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0); pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0); hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1); pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1); - printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n", - armclk, hclkd0, pclkd0, hclk, pclk); + printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz," + " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz," + " PCLK=%ld.%03ld MHz\n", + print_mhz(armclk), print_mhz(hclkd0), + print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk)); clk_fout_apll.rate = apll; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; + clk_fout_hpll.rate = hpll; clk_h.rate = hclk; clk_p.rate = pclk; + clk_f.rate = armclk; for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s5pc1xx_set_clksrc(init_parents[ptr]); + s5pc100_set_clksrc(init_parents[ptr]); } static struct clk *clks[] __initdata = { &clk_ext_xtal_mux, - &clk_mout_epll.clk, - &clk_fout_epll, + &clk_mout_apll.clk, + &clk_dout_apll, + &clk_dout_d0_bus, + &clk_dout_pclkd0, + &clk_dout_apll2, &clk_mout_mpll.clk, + &clk_mout_am.clk, + &clk_dout_d1_bus, + &clk_mout_onenand.clk, + &clk_dout_pclkd1, + &clk_dout_mpll2, + &clk_dout_cam, &clk_dout_mpll, + &clk_mout_epll.clk, + &clk_fout_epll, + &clk_iis_cd0, + &clk_iis_cd1, + &clk_iis_cd2, + &clk_pcm_cd0, + &clk_pcm_cd1, + &clk_spi0.clk, + &clk_spi1.clk, + &clk_spi2.clk, &clk_uart_uclk1.clk, - &clk_ext, - &clk_epll, - &clk_27m, - &clk_48m, - &clk_54m, + &clk_audio0.clk, + &clk_audio1.clk, + &clk_audio2.clk, + &clk_spdif.clk, + &clk_lcd.clk, + &clk_fimc0.clk, + &clk_fimc1.clk, + &clk_fimc2.clk, + &clk_mmc0.clk, + &clk_mmc1.clk, + &clk_mmc2.clk, + &clk_usbhost.clk, + &clk_arm, }; void __init s5pc100_register_clocks(void) @@ -1133,7 +1141,4 @@ void __init s5pc100_register_clocks(void) clkp->name, ret); } } - - clk_mpll.parent = &clk_mout_mpll.clk; - clk_epll.parent = &clk_mout_epll.clk; } diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c new file mode 100644 index 00000000000..1a63768a9a2 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c + * + * Copyright 2009 Samsung Electronics + * + * Base S5PC1XX setup information for 24bpp LCD framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fb.h> +#include <linux/gpio.h> + +#include <mach/regs-fb.h> +#include <mach/map.h> +#include <plat/fb.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-s5pc1xx.h> + +#define DISR_OFFSET 0x7008 + +void s5pc100_fb_gpio_setup_24bpp(void) +{ + unsigned int gpio = 0; + + for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c index 3d00c025fff..5e4a7c3a231 100644 --- a/arch/arm/plat-s5pc1xx/setup-i2c0.c +++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <linux/gpio.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - /* Pin configuration would be needed */ + s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c index c8f3ca42f51..a0a8b4ae6ad 100644 --- a/arch/arm/plat-s5pc1xx/setup-i2c1.c +++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <linux/gpio.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - /* Pin configuration would be needed */ + s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c new file mode 100644 index 00000000000..185c8941e64 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c + * + * Copyright 2009 Samsung Eletronics + * + * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <plat/gpio-cfg.h> +#include <plat/regs-sdhci.h> + +void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + unsigned int num; + + num = width; + /* In case of 8 width, we should decrease the 2 */ + if (width == 8) + num = width - 2; + + end = S5PC100_GPG0(2 + num); + + /* Set all the necessary GPG0/GPG1 pins to special-function 0 */ + for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + if (width == 8) { + for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + } + + s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2)); +} + +void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S5PC100_GPG2(2 + width); + + /* Set all the necessary GPG2 pins to special-function 2 */ + for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2)); +} + +void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S5PC100_GPG3(2 + width); + + /* Set all the necessary GPG3 pins to special-function 2 */ + for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2)); +} diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig new file mode 100644 index 00000000000..486a0d6301e --- /dev/null +++ b/arch/arm/plat-samsung/Kconfig @@ -0,0 +1,17 @@ +# arch/arm/plat-samsung/Kconfig +# +# Copyright 2009 Simtec Electronics +# +# Licensed under GPLv2 + +config PLAT_SAMSUNG + bool + depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX + default y + help + Base platform code for all Samsung SoC based systems + +if PLAT_SAMSUNG + + +endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile new file mode 100644 index 00000000000..4478b9f7dc3 --- /dev/null +++ b/arch/arm/plat-samsung/Makefile @@ -0,0 +1,11 @@ +# arch/arm/plat-s3c64xx/Makefile +# +# Copyright 2009 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := dummy.o +obj- := + |