aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/compressed/head-xscale.S4
-rw-r--r--arch/arm/common/dmabounce.c3
-rw-r--r--arch/arm/common/locomo.c66
-rw-r--r--arch/arm/kernel/armksyms.c2
-rw-r--r--arch/arm/kernel/arthur.c2
-rw-r--r--arch/arm/kernel/init_task.c1
-rw-r--r--arch/arm/kernel/sys_arm.c17
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c4
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c21
-rw-r--r--arch/arm/mach-at91/at91x40.c18
-rw-r--r--arch/arm/mach-ep93xx/core.c2
-rw-r--r--arch/arm/mach-integrator/impd1.c3
-rw-r--r--arch/arm/mach-integrator/pci_v3.c2
-rw-r--r--arch/arm/mach-ns9xxx/irq.c22
-rw-r--r--arch/arm/mach-omap1/board-palmte.c12
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c2
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c1
-rw-r--r--arch/arm/mach-omap2/board-apollon.c1
-rw-r--r--arch/arm/mach-omap2/board-generic.c1
-rw-r--r--arch/arm/mach-omap2/board-h4.c1
-rw-r--r--arch/arm/mach-omap2/clock.c4
-rw-r--r--arch/arm/mach-omap2/clock34xx.h21
-rw-r--r--arch/arm/mach-omap2/cm-regbits-34xx.h1
-rw-r--r--arch/arm/mach-omap2/gpmc.c2
-rw-r--r--arch/arm/mach-omap2/mailbox.c25
-rw-r--r--arch/arm/mach-omap2/prm.h2
-rw-r--r--arch/arm/mach-orion5x/addr-map.c66
-rw-r--r--arch/arm/mach-orion5x/common.c11
-rw-r--r--arch/arm/mach-orion5x/common.h1
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c2
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c2
-rw-r--r--arch/arm/mach-pxa/Makefile12
-rw-r--r--arch/arm/mach-pxa/cm-x270.c2
-rw-r--r--arch/arm/mach-pxa/colibri.c3
-rw-r--r--arch/arm/mach-pxa/corgi.c4
-rw-r--r--arch/arm/mach-pxa/cpu-pxa.c310
-rw-r--r--arch/arm/mach-pxa/em-x270.c2
-rw-r--r--arch/arm/mach-pxa/lubbock.c2
-rw-r--r--arch/arm/mach-pxa/pm.c10
-rw-r--r--arch/arm/mach-pxa/poodle.c2
-rw-r--r--arch/arm/mach-pxa/pxa25x.c11
-rw-r--r--arch/arm/mach-pxa/pxa27x.c11
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c7
-rw-r--r--arch/arm/mach-pxa/spitz.c2
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c3
-rw-r--r--arch/arm/mach-pxa/ssp.c2
-rw-r--r--arch/arm/mach-pxa/tosa.c6
-rw-r--r--arch/arm/mach-realview/platsmp.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c4
-rw-r--r--arch/arm/mach-sa1100/collie.c42
-rw-r--r--arch/arm/mach-sa1100/pm.c8
-rw-r--r--arch/arm/mm/proc-arm925.S2
-rw-r--r--arch/arm/mm/proc-arm926.S2
-rw-r--r--arch/arm/mm/proc-arm940.S2
-rw-r--r--arch/arm/mm/proc-arm946.S2
-rw-r--r--arch/arm/plat-omap/clock.c11
-rw-r--r--arch/arm/plat-omap/dma.c4
-rw-r--r--arch/arm/plat-omap/mailbox.c1
-rw-r--r--arch/arm/plat-s3c24xx/clock.c4
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x.c1
61 files changed, 437 insertions, 361 deletions
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 67ea99ef652..dd3fbd6766e 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -33,10 +33,6 @@ __XScale_start:
bic r0, r0, #0x1000 @ clear Icache
mcr p15, 0, r0, c1, c0, 0
-#ifdef CONFIG_ARCH_COTULLA_IDP
- mov r7, #MACH_TYPE_COTULLA_IDP
-#endif
-
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 52fc6a88328..2744673314b 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -650,7 +650,8 @@ EXPORT_SYMBOL(dma_map_sg);
EXPORT_SYMBOL(dma_unmap_sg);
EXPORT_SYMBOL(dma_sync_single_for_cpu);
EXPORT_SYMBOL(dma_sync_single_for_device);
-EXPORT_SYMBOL(dma_sync_sg);
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+EXPORT_SYMBOL(dma_sync_sg_for_device);
EXPORT_SYMBOL(dmabounce_register_dev);
EXPORT_SYMBOL(dmabounce_unregister_dev);
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index ae21755872e..d973c986f72 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -321,11 +321,42 @@ static void locomo_gpio_unmask_irq(unsigned int irq)
locomo_writel(r, mapbase + LOCOMO_GIE);
}
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+
+static int locomo_gpio_type(unsigned int irq, unsigned int type)
+{
+ unsigned int mask;
+ void __iomem *mapbase = get_irq_chip_data(irq);
+
+ mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
+
+ if (type == IRQT_PROBE) {
+ if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+ return 0;
+ type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+ }
+
+ if (type & __IRQT_RISEDGE)
+ GPIO_IRQ_rising_edge |= mask;
+ else
+ GPIO_IRQ_rising_edge &= ~mask;
+ if (type & __IRQT_FALEDGE)
+ GPIO_IRQ_falling_edge |= mask;
+ else
+ GPIO_IRQ_falling_edge &= ~mask;
+ locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
+ locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
+
+ return 0;
+}
+
static struct irq_chip locomo_gpio_chip = {
- .name = "LOCOMO-gpio",
- .ack = locomo_gpio_ack_irq,
- .mask = locomo_gpio_mask_irq,
- .unmask = locomo_gpio_unmask_irq,
+ .name = "LOCOMO-gpio",
+ .ack = locomo_gpio_ack_irq,
+ .mask = locomo_gpio_mask_irq,
+ .unmask = locomo_gpio_unmask_irq,
+ .set_type = locomo_gpio_type,
};
static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
@@ -450,22 +481,18 @@ static void locomo_setup_irq(struct locomo *lchip)
set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
- set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
- set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
- set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
- set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
@@ -488,7 +515,7 @@ static void locomo_setup_irq(struct locomo *lchip)
set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
- for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
+ for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
set_irq_chip(irq, &locomo_spi_chip);
set_irq_chip_data(irq, irqbase);
set_irq_handler(irq, handle_edge_irq);
@@ -574,20 +601,20 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPO);
- save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPICT); /* SPI */
+ save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPE);
save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
locomo_writel(0x00, lchip->base + LOCOMO_ASD);
- save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPIMD); /* SPI */
- locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
+ save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */
+ locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
locomo_writel(0x00, lchip->base + LOCOMO_DAC);
locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
- if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
+ if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */
else
/* 18MHz already enabled, so no wait */
@@ -616,10 +643,10 @@ static int locomo_resume(struct platform_device *dev)
spin_lock_irqsave(&lchip->lock, flags);
locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
- locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
+ locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
- locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
+ locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
locomo_writel(0x00, lchip->base + LOCOMO_C32K);
locomo_writel(0x90, lchip->base + LOCOMO_TADC);
@@ -688,9 +715,9 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
/* GPIO */
locomo_writel(0, lchip->base + LOCOMO_GPO);
- locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
, lchip->base + LOCOMO_GPE);
- locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
, lchip->base + LOCOMO_GPD);
locomo_writel(0, lchip->base + LOCOMO_GIE);
@@ -833,7 +860,10 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
spin_lock_irqsave(&lchip->lock, flags);
r = locomo_readl(lchip->base + LOCOMO_GPD);
- r &= ~bits;
+ if (dir)
+ r |= bits;
+ else
+ r &= ~bits;
locomo_writel(r, lchip->base + LOCOMO_GPD);
r = locomo_readl(lchip->base + LOCOMO_GPE);
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index f73d62e8ab6..688b7b1ee41 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -179,3 +179,5 @@ EXPORT_SYMBOL(_find_next_zero_bit_be);
EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
+
+EXPORT_SYMBOL(copy_page);
diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c
index 0ee2e981963..321c5291d05 100644
--- a/arch/arm/kernel/arthur.c
+++ b/arch/arm/kernel/arthur.c
@@ -90,3 +90,5 @@ static void __exit arthur_exit(void)
module_init(arthur_init);
module_exit(arthur_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index bd4ef53bc6b..8b8c9d38a76 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -13,7 +13,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 9bd1870d980..0128687ba0f 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -34,23 +34,6 @@ extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
unsigned long new_len, unsigned long flags,
unsigned long new_addr);
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user *fildes)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(fildes, fd, 2*sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
/* common code for old and new mmaps */
inline long do_mmap2(
unsigned long addr, unsigned long len,
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 6b9e423ec47..247e8e7cebe 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -544,10 +544,10 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
struct resource *fb_res = &lcdc_resources[2];
size_t fb_len = fb_res->end - fb_res->start + 1;
- fb = ioremap_writecombine(fb_res->start, fb_len);
+ fb = ioremap(fb_res->start, fb_len);
if (fb) {
memset(fb, 0, fb_len);
- iounmap(fb, fb_len);
+ iounmap(fb);
}
}
lcdc_data = *data;
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index b21f3339326..9945cd25d0a 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -332,13 +332,6 @@ static struct resource lcdc_resources[] = {
.end = AT91SAM9RL_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
-#if defined(CONFIG_FB_INTSRAM)
- [2] = {
- .start = AT91SAM9RL_SRAM_BASE,
- .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-#endif
};
static struct platform_device at91_lcdc_device = {
@@ -381,20 +374,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
-#ifdef CONFIG_FB_INTSRAM
- {
- void __iomem *fb;
- struct resource *fb_res = &lcdc_resources[2];
- size_t fb_len = fb_res->end - fb_res->start + 1;
-
- fb = ioremap_writecombine(fb_res->start, fb_len);
- if (fb) {
- memset(fb, 0, fb_len);
- iounmap(fb, fb_len);
- }
- }
-#endif
-
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
}
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 1de121fc55f..f44647738ee 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -16,16 +16,32 @@
#include <asm/mach/arch.h>
#include <asm/arch/at91x40.h>
#include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
#include "generic.h"
/*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
*/
int clk_enable(struct clk *clk)
{
return 0;
}
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+
void __init at91x40_initialize(unsigned long main_clock)
{
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8bc18724054..1d7bca6aa44 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -280,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
const int port = gpio >> 3;
const int port_mask = 1 << (gpio & 7);
- gpio_direction_output(gpio, gpio_get_value(gpio));
+ gpio_direction_input(gpio);
switch (type) {
case IRQT_RISING:
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 92d79fb3931..62e653a3ea1 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev)
lm_set_drvdata(dev, impd1);
- printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+ printk("IM-PD1 found at 0x%08lx\n",
+ (unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
impd1->vcos[i].owner = THIS_MODULE,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d55fa4e9bb4..c07f497000c 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printk(KERN_DEBUG "%s", buf);
- printascii(buf);
#endif
v3_writeb(V3_LB_ISTAT, 0);
@@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
unsigned long pc = instruction_pointer(regs);
unsigned long instr = *(unsigned long *)pc;
char buf[128];
+ extern void printascii(const char *);
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 36e5835e609..ca85d24cf39 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -62,7 +62,7 @@ static struct irq_chip ns9xxx_chip = {
#if 0
#define handle_irq handle_level_irq
#else
-void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
+static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int cpu = smp_processor_id();
struct irqaction *action;
@@ -70,27 +70,35 @@ void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
spin_lock(&desc->lock);
- if (unlikely(desc->status & IRQ_INPROGRESS))
- goto out_unlock;
+ BUG_ON(desc->status & IRQ_INPROGRESS);
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_cpu(cpu).irqs[irq]++;
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED)))
- goto out_unlock;
+ goto out_mask;
desc->status |= IRQ_INPROGRESS;
spin_unlock(&desc->lock);
action_ret = handle_IRQ_event(irq, action);
+ /* XXX: There is no direct way to access noirqdebug, so check
+ * unconditionally for spurious irqs...
+ * Maybe this function should go to kernel/irq/chip.c? */
+ note_interrupt(irq, desc, action_ret);
+
spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
- if (!(desc->status & IRQ_DISABLED) && desc->chip->ack)
- desc->chip->ack(irq);
-out_unlock:
+ if (desc->status & IRQ_DISABLED)
+out_mask:
+ desc->chip->mask(irq);
+
+ /* ack unconditionally to unmask lower prio irqs */
+ desc->chip->ack(irq);
+
spin_unlock(&desc->lock);
}
#define handle_irq handle_prio_irq
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ca1a4bf78a1..a4d20127a60 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -24,7 +24,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
@@ -63,7 +62,7 @@ static const int palmte_keymap[] = {
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
- KEY(1, 4, KEY_CENTER),
+ KEY(1, 4, KEY_ENTER),
0,
};
@@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
#define palmte_get_power_status NULL
#endif
-static struct tsc2102_config palmte_tsc2102_config = {
- .use_internal = 0,
- .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
- .temp_at25c = { 2200, 2615 },
- .apm_report = palmte_get_power_status,
- .alsa_config = &palmte_alsa_config,
-};
-
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
@@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
- .platform_data = &palmte_tsc2102_config,
.max_speed_hz = 8000000,
},
};
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 156510777ff..e020c277460 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -65,7 +65,7 @@ static int palmz71_keymap[] = {
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
- KEY(1, 4, KEY_CENTER),
+ KEY(1, 4, KEY_ENTER),
KEY(2, 0, KEY_CAMERA),
0,
};
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1c12d7c6c7f..1682eb77c46 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -208,6 +208,7 @@ static void __init omap_2430sdp_init(void)
static void __init omap_2430sdp_map_io(void)
{
+ omap2_set_globals_243x();
omap2_map_common_io();
}
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index a1e1e6765b5..620fa0f120e 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -394,6 +394,7 @@ static void __init omap_apollon_init(void)
static void __init omap_apollon_map_io(void)
{
+ omap2_set_globals_242x();
omap2_map_common_io();
}
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 90938151bcf..df8be081e15 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -65,6 +65,7 @@ static void __init omap_generic_init(void)
static void __init omap_generic_map_io(void)
{
+ omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
omap2_map_common_io();
}
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index d1915f99a5f..0d28f6897c8 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -420,6 +420,7 @@ static void __init omap_h4_init(void)
static void __init omap_h4_map_io(void)
{
+ omap2_set_globals_242x();
omap2_map_common_io();
}
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b57ffb5a22a..ab9fc57d25f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -205,7 +205,9 @@ static void omap2_clk_wait_ready(struct clk *clk)
/* REVISIT: What are the appropriate exclusions for 34XX? */
/* OMAP3: ignore DSS-mod clocks */
if (cpu_is_omap34xx() &&
- (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+ (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
+ ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
+ clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
return;
/* Check if both functional and interface clocks
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index cf4644a94b9..c9c5972a2e2 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -836,7 +836,8 @@ static struct clk dpll5_m2_ck = {
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
.clksel_mask = OMAP3430ES2_DIV_120M_MASK,
.clksel = div16_dpll5_clksel,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+ .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+ PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
@@ -1046,12 +1047,13 @@ static struct clk iva2_ck = {
.name = "iva2_ck",
.parent = &dpll2_m2_ck,
.init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_IVA2_CLK_MASK,
.clksel = iva2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
@@ -1836,7 +1838,8 @@ static struct clk omapctrl_ick = {
static struct clk ssi_l4_ick = {
.name = "ssi_l4_ick",
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+ PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
@@ -2344,7 +2347,7 @@ static struct clk gpio6_fck = {
.name = "gpio6_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT6_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO6_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -2353,7 +2356,7 @@ static struct clk gpio5_fck = {
.name = "gpio5_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT5_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO5_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -2362,7 +2365,7 @@ static struct clk gpio4_fck = {
.name = "gpio4_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT4_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -2371,7 +2374,7 @@ static struct clk gpio3_fck = {
.name = "gpio3_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT3_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -2380,7 +2383,7 @@ static struct clk gpio2_fck = {
.name = "gpio2_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT2_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 9249129a5f4..3c38395f644 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -56,6 +56,7 @@
/* CM_FCLKEN_IVA2 */
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2 (1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
/* CM_CLKEN_PLL_IVA2 */
#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT 8
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 02cede295e8..dbf68dc50ae 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -42,7 +42,7 @@
#define GPMC_STATUS 0x54
#define GPMC_PREFETCH_CONFIG1 0x1e0
#define GPMC_PREFETCH_CONFIG2 0x1e4
-#define GPMC_PREFETCH_CONTROL 0x1e8
+#define GPMC_PREFETCH_CONTROL 0x1ec
#define GPMC_PREFETCH_STATUS 0x1f0
#define GPMC_ECC_CONFIG 0x1f4
#define GPMC_ECC_CONTROL 0x1f8
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index b03cd06e055..4799561c5a9 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -70,6 +70,9 @@ struct omap_mbox2_priv {
static struct clk *mbox_ick_handle;
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+ omap_mbox_type_t irq);
+
static inline unsigned int mbox_read_reg(unsigned int reg)
{
return __raw_readl(mbox_base + reg);
@@ -81,7 +84,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg)
}
/* Mailbox H/W preparations */
-static inline int omap2_mbox_startup(struct omap_mbox *mbox)
+static int omap2_mbox_startup(struct omap_mbox *mbox)
{
unsigned int l;
@@ -97,38 +100,40 @@ static inline int omap2_mbox_startup(struct omap_mbox *mbox)
l |= 0x00000011;
mbox_write_reg(l, MAILBOX_SYSCONFIG);
+ omap2_mbox_enable_irq(mbox, IRQ_RX);
+
return 0;
}
-static inline void omap2_mbox_shutdown(struct omap_mbox *mbox)
+static void omap2_mbox_shutdown(struct omap_mbox *mbox)
{
clk_disable(mbox_ick_handle);
clk_put(mbox_ick_handle);
}
/* Mailbox FIFO handle functions */
-static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
+static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
return (mbox_msg_t) mbox_read_reg(fifo->msg);
}
-static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
mbox_write_reg(msg, fifo->msg);
}
-static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
return (mbox_read_reg(fifo->msg_stat) == 0);
}
-static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
@@ -136,7 +141,7 @@ static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
}
/* Mailbox IRQ handle functions */
-static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -147,7 +152,7 @@ static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
mbox_write_reg(l, p->irqenable);
}
-static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -158,7 +163,7 @@ static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
mbox_write_reg(l, p->irqenable);
}
-static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
+static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -167,7 +172,7 @@ static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
mbox_write_reg(bit, p->irqstatus);
}
-static inline int omap2_mbox_is_irq(struct omap_mbox *mbox,
+static int omap2_mbox_is_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ab7649afd89..618f8111658 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -30,7 +30,7 @@
/*
* Architecture-specific global PRM registers
- * Use prm_{read,write}_reg() with these registers.
+ * Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx, and PRM_* on 34xx. (The exceptions are the
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 9608503d67f..e63fb05dc89 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -34,11 +34,7 @@
* Non-CPU Masters address decoding --
* Unlike the CPU, we setup the access from Orion's master interfaces to DDR
* banks only (the typical use case).
- * Setup access for each master to DDR is issued by common.c.
- *
- * Note: although orion_setbits() and orion_clrbits() are not atomic
- * no locking is necessary here since code in this file is only called
- * at boot time when there is no concurrency issues.
+ * Setup access for each master to DDR is issued by platform device setup.
*/
/*
@@ -48,10 +44,6 @@
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
-#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
- ((n) == 1) ? 0xd : \
- ((n) == 2) ? 0xb : \
- ((n) == 3) ? 0x7 : 0xf)
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCIE_WA 0x79
@@ -61,17 +53,12 @@
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
-#define WIN_EN 1
/*
* Helpers to get DDR bank info
*/
-#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) * 8))
-#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) * 8))
-#define DDR_MAX_CS 4
-#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
-#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
-#define DDR_BANK_EN 1
+#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
+#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
/*
* CPU Address Decode Windows registers
@@ -81,17 +68,6 @@
#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
-/*
- * Gigabit Ethernet Address Decode Windows registers
- */
-#define ETH_WIN_BASE(win) ORION5X_ETH_REG(0x200 + ((win) * 8))
-#define ETH_WIN_SIZE(win) ORION5X_ETH_REG(0x204 + ((win) * 8))
-#define ETH_WIN_REMAP(win) ORION5X_ETH_REG(0x280 + ((win) * 4))
-#define ETH_WIN_EN ORION5X_ETH_REG(0x290)
-#define ETH_WIN_PROT ORION5X_ETH_REG(0x294)
-#define ETH_MAX_WIN 6
-#define ETH_MAX_REMAP_WIN 4
-
struct mbus_dram_target_info orion5x_mbus_dram_info;
@@ -202,39 +178,3 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
{
setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
}
-
-void __init orion5x_setup_eth_wins(void)
-{
- int i;
-
- /*
- * First, disable and clear windows
- */
- for (i = 0; i < ETH_MAX_WIN; i++) {
- orion5x_write(ETH_WIN_BASE(i), 0);
- orion5x_write(ETH_WIN_SIZE(i), 0);
- orion5x_setbits(ETH_WIN_EN, 1 << i);
- orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
- if (i < ETH_MAX_REMAP_WIN)
- orion5x_write(ETH_WIN_REMAP(i), 0);
- }
-
- /*
- * Setup windows for DDR banks.
- */
- for (i = 0; i < DDR_MAX_CS; i++) {
- u32 base, size;
- size = orion5x_read(DDR_SIZE_CS(i));
- base = orion5x_read(DDR_BASE_CS(i));
- if (size & DDR_BANK_EN) {
- base = DDR_REG_TO_BASE(base);
- size = DDR_REG_TO_SIZE(size);
- orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
- orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
- (ATTR_DDR_CS(i) << 8) |
- TARGET_DDR);
- orion5x_clrbits(ETH_WIN_EN, 1 << i);
- orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
- }
- }
-}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 968deb58be0..4f13fd037f0 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -190,6 +190,11 @@ static struct platform_device orion5x_ehci1 = {
* (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
****************************************************************************/
+struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
+ .dram = &orion5x_mbus_dram_info,
+ .t_clk = ORION5X_TCLK,
+};
+
static struct resource orion5x_eth_shared_resources[] = {
{
.start = ORION5X_ETH_PHYS_BASE + 0x2000,
@@ -201,6 +206,9 @@ static struct resource orion5x_eth_shared_resources[] = {
static struct platform_device orion5x_eth_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 0,
+ .dev = {
+ .platform_data = &orion5x_eth_shared_data,
+ },
.num_resources = 1,
.resource = orion5x_eth_shared_resources,
};
@@ -223,7 +231,9 @@ static struct platform_device orion5x_eth = {
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
{
+ eth_data->shared = &orion5x_eth_shared;
orion5x_eth.dev.platform_data = eth_data;
+
platform_device_register(&orion5x_eth_shared);
platform_device_register(&orion5x_eth);
}
@@ -360,7 +370,6 @@ void __init orion5x_init(void)
* Setup Orion address map
*/
orion5x_setup_cpu_mbus_bridge();
- orion5x_setup_eth_wins();
/*
* Register devices.
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 14adf8d1a54..bd0f05de6e1 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -22,7 +22,6 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-void orion5x_setup_eth_wins(void);
/*
* Shared code used internally by other Orion core functions.
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index f9430f5ca9a..27ce967ab9e 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -58,7 +58,7 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
}
static struct hw_pci dns323_pci __initdata = {
- .nr_controllers = 1,
+ .nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 88410862fee..f5074b877b7 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -138,7 +138,7 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
}
static struct hw_pci kurobox_pro_pci __initdata = {
- .nr_controllers = 1,
+ .nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 6a830853aa6..0e6d05bb81a 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -5,6 +5,13 @@
# Common support (must be linked before board specific support)
obj-y += clock.o devices.o generic.o irq.o dma.o \
time.o gpio.o
+obj-$(CONFIG_PM) += pm.o sleep.o standby.o
+obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
+
+# Generic drivers that other drivers may depend upon
+obj-$(CONFIG_PXA_SSP) += ssp.o
+
+# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
@@ -48,11 +55,6 @@ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y)
-# Misc features
-obj-$(CONFIG_PM) += pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
-obj-$(CONFIG_PXA_SSP) += ssp.o
-
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 6d4416a4f37..f5851d1adc2 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -59,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = {
[2] = {
.start = CMX270_ETHIRQ,
.end = CMX270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 43bf5a183e9..574839d7c13 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
[2] = {
.start = COLIBRI_ETH_IRQ,
.end = COLIBRI_ETH_IRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
@@ -119,7 +119,6 @@ static void __init colibri_init(void)
/* DM9000 LAN */
pxa_gpio_mode(GPIO78_nCS_2_MD);
pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
- set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
}
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 259ca821e46..b757dd75665 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -493,8 +493,6 @@ static struct platform_device *devices[] __initdata = {
static void corgi_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
if (!machine_is_corgi())
/* Green LED off tells the bootloader to halt */
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
@@ -503,8 +501,6 @@ static void corgi_poweroff(void)
static void corgi_restart(char mode)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index 4b21479332a..fb9ba1ab282 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -49,125 +49,216 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
#define freq_debug 0
#endif
+static unsigned int pxa27x_maxfreq;
+module_param(pxa27x_maxfreq, uint, 0);
+MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
+ "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
+
typedef struct {
unsigned int khz;
unsigned int membus;
unsigned int cccr;
unsigned int div2;
+ unsigned int cclkcfg;
} pxa_freqs_t;
/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
-#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32))
-
-#define CCLKCFG_TURBO 0x1
-#define CCLKCFG_FCS 0x2
-#define PXA25x_MIN_FREQ 99500
-#define PXA25x_MAX_FREQ 398100
-#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK 0xFFF
+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
+#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
+#define CCLKCFG_TURBO 0x1
+#define CCLKCFG_FCS 0x2
+#define CCLKCFG_HALFTURBO 0x4
+#define CCLKCFG_FASTBUS 0x8
+#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK 0xFFF
+/*
+ * PXA255 definitions
+ */
/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
+
static pxa_freqs_t pxa255_run_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2*/
- { 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
- {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
- {199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
- {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
- {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
- {398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */
- {0,}
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
+ { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
+ {132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */
+ {199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */
+ {265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */
+ {331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */
+ {398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */
};
-#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-
-static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
static pxa_freqs_t pxa255_turbo_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2*/
- { 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */
- {199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */
- {298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */
- {298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
- {398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */
- {0,}
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
+ { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
+ {199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */
+ {298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */
+ {298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */
+ {398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */
+};
+
+#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table
+ pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
+static struct cpufreq_frequency_table
+ pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
+
+/*
+ * PXA270 definitions
+ *
+ * For the PXA27x:
+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
+ *
+ * A = 0 => memory controller clock from table 3-7,
+ * A = 1 => memory controller clock = system bus clock
+ * Run mode frequency = 13 MHz * L
+ * Turbo mode frequency = 13 MHz * L * N
+ * System bus frequency = 13 MHz * L / (B + 1)
+ *
+ * In CCCR:
+ * A = 1
+ * L = 16 oscillator to run mode ratio
+ * 2N = 6 2 * (turbo mode to run mode ratio)
+ *
+ * In CCLKCFG:
+ * B = 1 Fast bus mode
+ * HT = 0 Half-Turbo mode
+ * T = 1 Turbo mode
+ *
+ * For now, just support some of the combinations in table 3-7 of
+ * PXA27x Processor Family Developer's Manual to simplify frequency
+ * change sequences.
+ */
+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
+#define CCLKCFG2(B, HT, T) \
+ (CCLKCFG_FCS | \
+ ((B) ? CCLKCFG_FASTBUS : 0) | \
+ ((HT) ? CCLKCFG_HALFTURBO : 0) | \
+ ((T) ? CCLKCFG_TURBO : 0))
+
+static pxa_freqs_t pxa27x_freqs[] = {
+ {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)},
+ {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)},
+ {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
+ {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
+ {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
+ {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
+ {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
};
-#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
-static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
+#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
+static struct cpufreq_frequency_table
+ pxa27x_freq_table[NUM_PXA27x_FREQS+1];
extern unsigned get_clk_frequency_khz(int info);
+static void find_freq_tables(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table **freq_table,
+ pxa_freqs_t **pxa_freqs)
+{
+ if (cpu_is_pxa25x()) {
+ if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ *pxa_freqs = pxa255_run_freqs;
+ *freq_table = pxa255_run_freq_table;
+ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ *pxa_freqs = pxa255_turbo_freqs;
+ *freq_table = pxa255_turbo_freq_table;
+ } else {
+ printk("CPU PXA: Unknown policy found. "
+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
+ *pxa_freqs = pxa255_run_freqs;
+ *freq_table = pxa255_run_freq_table;
+ }
+ }
+ if (cpu_is_pxa27x()) {
+ *pxa_freqs = pxa27x_freqs;
+ *freq_table = pxa27x_freq_table;
+ }
+}
+
+static void pxa27x_guess_max_freq(void)
+{
+ if (!pxa27x_maxfreq) {
+ pxa27x_maxfreq = 416000;
+ printk(KERN_INFO "PXA CPU 27x max frequency not defined "
+ "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+ pxa27x_maxfreq);
+ } else {
+ pxa27x_maxfreq *= 1000;
+ }
+}
+
+static u32 mdrefr_dri(unsigned int freq)
+{
+ u32 dri = 0;
+
+ if (cpu_is_pxa25x())
+ dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
+ if (cpu_is_pxa27x())
+ dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
+ return dri;
+}
+
/* find a valid frequency point */
static int pxa_verify_policy(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *pxa_freqs_table;
+ pxa_freqs_t *pxa_freqs;
int ret;
- if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
- pxa_freqs_table = pxa255_run_freq_table;
- } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
- pxa_freqs_table = pxa255_turbo_freq_table;
- } else {
- printk("CPU PXA: Unknown policy found. "
- "Using CPUFREQ_POLICY_PERFORMANCE\n");
- pxa_freqs_table = pxa255_run_freq_table;
- }
-
+ find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
if (freq_debug)
pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
- policy->min, policy->max);
+ policy->min, policy->max);
return ret;
}
+static unsigned int pxa_cpufreq_get(unsigned int cpu)
+{
+ return get_clk_frequency_khz(0);
+}
+
static int pxa_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
+ unsigned int target_freq,
+ unsigned int relation)
{
struct cpufreq_frequency_table *pxa_freqs_table;
pxa_freqs_t *pxa_freq_settings;
struct cpufreq_freqs freqs;
unsigned int idx;
unsigned long flags;
- unsigned int unused, preset_mdrefr, postset_mdrefr;
- void *ramstart = phys_to_virt(0xa0000000);
+ unsigned int new_freq_cpu, new_freq_mem;
+ unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
/* Get the current policy */
- if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
- pxa_freq_settings = pxa255_run_freqs;
- pxa_freqs_table = pxa255_run_freq_table;
- } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
- pxa_freq_settings = pxa255_turbo_freqs;
- pxa_freqs_table = pxa255_turbo_freq_table;
- } else {
- printk("CPU PXA: Unknown policy found. "
- "Using CPUFREQ_POLICY_PERFORMANCE\n");
- pxa_freq_settings = pxa255_run_freqs;
- pxa_freqs_table = pxa255_run_freq_table;
- }
+ find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
/* Lookup the next frequency */
if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
- target_freq, relation, &idx)) {
+ target_freq, relation, &idx)) {
return -EINVAL;
}
+ new_freq_cpu = pxa_freq_settings[idx].khz;
+ new_freq_mem = pxa_freq_settings[idx].membus;
freqs.old = policy->cur;
- freqs.new = pxa_freq_settings[idx].khz;
+ freqs.new = new_freq_cpu;
freqs.cpu = policy->cpu;
if (freq_debug)
- pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
- freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
- (pxa_freq_settings[idx].membus / 2000) :
- (pxa_freq_settings[idx].membus / 1000));
+ pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
+ "(SDRAM %d Mhz)\n",
+ freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+ (new_freq_mem / 2000) : (new_freq_mem / 1000));
/*
* Tell everyone what we're about to do...
@@ -177,16 +268,16 @@ static int pxa_set_target(struct cpufreq_policy *policy,
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* Calculate the next MDREFR. If we're slowing down the SDRAM clock
- * we need to preset the smaller DRI before the change. If we're speeding
- * up we need to set the larger DRI value after the change.
+ * we need to preset the smaller DRI before the change. If we're
+ * speeding up we need to set the larger DRI value after the change.
*/
preset_mdrefr = postset_mdrefr = MDREFR;
- if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
- preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
- MDREFR_DRI(pxa_freq_settings[idx].membus);
+ if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
+ preset_mdrefr |= mdrefr_dri(new_freq_mem);
}
- postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
- MDREFR_DRI(pxa_freq_settings[idx].membus);
+ postset_mdrefr =
+ (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
/* If we're dividing the memory clock by two for the SDRAM clock, this
* must be set prior to the change. Clearing the divide must be done
@@ -201,26 +292,27 @@ static int pxa_set_target(struct cpufreq_policy *policy,
local_irq_save(flags);
- /* Set new the CCCR */
+ /* Set new the CCCR and prepare CCLKCFG */
CCCR = pxa_freq_settings[idx].cccr;
+ cclkcfg = pxa_freq_settings[idx].cclkcfg;
asm volatile(" \n\
ldr r4, [%1] /* load MDREFR */ \n\
b 2f \n\
- .align 5 \n\
+ .align 5 \n\
1: \n\
- str %4, [%1] /* preset the MDREFR */ \n\
+ str %3, [%1] /* preset the MDREFR */ \n\
mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
- str %5, [%1] /* postset the MDREFR */ \n\
+ str %4, [%1] /* postset the MDREFR */ \n\
\n\
b 3f \n\
2: b 1b \n\
3: nop \n\
"
- : "=&r" (unused)
- : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart),
- "r" (preset_mdrefr), "r" (postset_mdrefr)
- : "r4", "r5");
+ : "=&r" (unused)
+ : "r" (&MDREFR), "r" (cclkcfg),
+ "r" (preset_mdrefr), "r" (postset_mdrefr)
+ : "r4", "r5");
local_irq_restore(flags);
/*
@@ -233,38 +325,57 @@ static int pxa_set_target(struct cpufreq_policy *policy,
return 0;
}
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
- return get_clk_frequency_khz(0);
-}
-
-static int pxa_cpufreq_init(struct cpufreq_policy *policy)
+static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
{
int i;
+ unsigned int freq;
+
+ /* try to guess pxa27x cpu */
+ if (cpu_is_pxa27x())
+ pxa27x_guess_max_freq();
/* set default policy and cpuinfo */
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- policy->policy = CPUFREQ_POLICY_PERFORMANCE;
- policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
- policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
+ if (cpu_is_pxa25x())
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
- policy->cur = get_clk_frequency_khz(0); /* current freq */
+ policy->cur = get_clk_frequency_khz(0); /* current freq */
policy->min = policy->max = policy->cur;
- /* Generate the run cpufreq_frequency_table struct */
- for (i = 0; i < NUM_RUN_FREQS; i++) {
+ /* Generate pxa25x the run cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
pxa255_run_freq_table[i].index = i;
}
-
pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
- /* Generate the turbo cpufreq_frequency_table struct */
- for (i = 0; i < NUM_TURBO_FREQS; i++) {
- pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
+
+ /* Generate pxa25x the turbo cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
+ pxa255_turbo_freq_table[i].frequency =
+ pxa255_turbo_freqs[i].khz;
pxa255_turbo_freq_table[i].index = i;
}
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+ /* Generate the pxa27x cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_PXA27x_FREQS; i++) {
+ freq = pxa27x_freqs[i].khz;
+ if (freq > pxa27x_maxfreq)
+ break;
+ pxa27x_freq_table[i].frequency = freq;
+ pxa27x_freq_table[i].index = i;
+ }
+ pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ /*
+ * Set the policy's minimum and maximum frequencies from the tables
+ * just constructed. This sets cpuinfo.mxx_freq, min and max.
+ */
+ if (cpu_is_pxa25x())
+ cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
+ else if (cpu_is_pxa27x())
+ cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
+
printk(KERN_INFO "PXA CPU frequency change support initialized\n");
return 0;
@@ -275,26 +386,25 @@ static struct cpufreq_driver pxa_cpufreq_driver = {
.target = pxa_set_target,
.init = pxa_cpufreq_init,
.get = pxa_cpufreq_get,
- .name = "PXA25x",
+ .name = "PXA2xx",
};
static int __init pxa_cpu_init(void)
{
int ret = -ENODEV;
- if (cpu_is_pxa25x())
+ if (cpu_is_pxa25x() || cpu_is_pxa27x())
ret = cpufreq_register_driver(&pxa_cpufreq_driver);
return ret;
}
static void __exit pxa_cpu_exit(void)
{
- if (cpu_is_pxa25x())
- cpufreq_unregister_driver(&pxa_cpufreq_driver);
+ cpufreq_unregister_driver(&pxa_cpufreq_driver);
}
-MODULE_AUTHOR ("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
+MODULE_AUTHOR("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
MODULE_LICENSE("GPL");
module_init(pxa_cpu_init);
module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index edc4f07a230..9c57700ee5c 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -50,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = {
[2] = {
.start = EM_X270_ETHIRQ,
.end = EM_X270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0993f4d1a0b..7b9bdd0c666 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -396,7 +396,7 @@ static struct pxafb_mach_info sharp_lm8v31 = {
.cmap_inverse = 0,
.cmap_static = 0,
.lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
- LCD_AC_BIAS_FREQ(255);
+ LCD_AC_BIAS_FREQ(255),
};
#define MMC_POLL_RATE msecs_to_jiffies(1000)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index ec1bbf333a3..7d4debbdcca 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -42,20 +42,17 @@ int pxa_pm_enter(suspend_state_t state)
if (state != PM_SUSPEND_STANDBY) {
pxa_cpu_pm_fns->save(sleep_save);
/* before sleeping, calculate and save a checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
sleep_save_checksum += sleep_save[i];
}
- /* Clear reset status */
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
/* *** go zzz *** */
pxa_cpu_pm_fns->enter(state);
cpu_init();
if (state != PM_SUSPEND_STANDBY) {
/* after sleeping, validate the checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
checksum += sleep_save[i];
/* if invalid, display message and wait for a hardware reset */
@@ -101,7 +98,8 @@ static int __init pxa_pm_init(void)
return -EINVAL;
}
- sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL);
+ sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
+ GFP_KERNEL);
if (!sleep_save) {
printk(KERN_ERR "failed to alloc memory for pm save\n");
return -ENOMEM;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index ca5ac196b47..0b30f25cff3 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -326,13 +326,11 @@ static struct platform_device *devices[] __initdata = {
static void poodle_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
arm_machine_restart('h');
}
static void poodle_restart(char mode)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
arm_machine_restart('h');
}
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index d9b5450aee5..e5b417d14bb 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -150,9 +150,7 @@ static struct clk pxa25x_clks[] = {
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_START = 0,
-
- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
+enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -162,7 +160,7 @@ enum { SLEEP_SAVE_START = 0,
SLEEP_SAVE_CKEN,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
@@ -200,6 +198,9 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
static void pxa25x_cpu_pm_enter(suspend_state_t state)
{
+ /* Clear reset status */
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
switch (state) {
case PM_SUSPEND_MEM:
/* set resume return address */
@@ -210,7 +211,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
}
static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.valid = suspend_valid_only_mem,
.save = pxa25x_cpu_pm_save,
.restore = pxa25x_cpu_pm_restore,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7a2449dd0fd..7e945836e12 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -181,9 +181,7 @@ static struct clk pxa27x_clks[] = {
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_START = 0,
-
- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
+enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
@@ -198,7 +196,7 @@ enum { SLEEP_SAVE_START = 0,
SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
@@ -251,6 +249,9 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
/* Clear edge-detect status register. */
PEDR = 0xDF12FE1B;
+ /* Clear reset status */
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
switch (state) {
case PM_SUSPEND_STANDBY:
pxa_cpu_standby();
@@ -269,7 +270,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
}
static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.save = pxa27x_cpu_pm_save,
.restore = pxa27x_cpu_pm_restore,
.valid = pxa27x_cpu_pm_valid,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b6a6f5fcc77..644550bfa33 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -256,12 +256,11 @@ static unsigned long wakeup_src;
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-enum { SLEEP_SAVE_START = 0,
- SLEEP_SAVE_CKENA,
+enum { SLEEP_SAVE_CKENA,
SLEEP_SAVE_CKENB,
SLEEP_SAVE_ACCR,
- SLEEP_SAVE_SIZE,
+ SLEEP_SAVE_COUNT,
};
static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
@@ -376,7 +375,7 @@ static int pxa3xx_cpu_pm_valid(suspend_state_t state)
}
static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
- .save_size = SLEEP_SAVE_SIZE,
+ .save_count = SLEEP_SAVE_COUNT,
.save = pxa3xx_cpu_pm_save,
.restore = pxa3xx_cpu_pm_restore,
.valid = pxa3xx_cpu_pm_valid,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 62a02c3927c..e7d0fcd9b43 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -529,8 +529,6 @@ static struct platform_device *devices[] __initdata = {
static void spitz_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 7a7f5f947cc..23f050feb20 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -119,9 +119,6 @@ static void spitz_presuspend(void)
/* nRESET_OUT Disable */
PSLR |= PSLR_SL_ROD;
- /* Clear reset status */
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR = PCFR_GPR_EN | PCFR_OPDE;
}
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 00af7f2fed6..0bb31982fb6 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label)
mutex_unlock(&ssp_lock);
- if (ssp->port_id != port)
+ if (&ssp->node == &ssp_list)
return NULL;
return ssp;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 6458f6d371d..ab4a9f57991 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,10 +467,8 @@ static struct platform_device *devices[] __initdata = {
static void tosa_poweroff(void)
{
- RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
- pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
- GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+ gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
+ gpio_set_value(TOSA_GPIO_ON_RESET, 1);
mdelay(1000);
arm_machine_restart('h');
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 3e57428affe..8e813ed5751 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu)
{
+ trace_hardirqs_off();
+
/*
* the primary core may have used a "cross call" soft interrupt
* to get this processor out of WFI in the BootMonitor - make
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 661a2358ac2..27f63d5d3a7 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = {
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index c56423373ff..4c4b5c4207c 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = {
[2] = {
.start = IRQ_VR1000_DM9000A,
.end = IRQ_VR1000_DM9000A,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
@@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = {
[2] = {
.start = IRQ_VR1000_DM9000N,
.end = IRQ_VR1000_DM9000N,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6496eb645ce..2f772a3965c 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -225,26 +225,28 @@ static void __init collie_init(void)
int ret = 0;
/* cpu initialize */
- GAFR = ( GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
- GPIO_32_768kHz );
-
- GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
- GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
- GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
- GPLR = GPIO_GPIO18;
-
- // PPC pin setting
- PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
- PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
- PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
-
- PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
-
- GAFR |= GPIO_32_768kHz;
- GPDR |= GPIO_32_768kHz;
- TUCR = TUCR_32_768kHz;
+ GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+ GPIO_MCP_CLK | GPIO_32_768kHz;
+
+ GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+ GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+ GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+ COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+ COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+
+ PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+ PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+ PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+
+ PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+ COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+
+ PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+ PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+ PCFR = PCFR_OPDE;
+
platform_scoop_config = &collie_pcmcia_config;
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 246c573e725..1693d447a22 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -43,20 +43,18 @@ extern void sa1100_cpu_resume(void);
* More ones like CP and general purpose register values are preserved
* on the stack and then the stack pointer is stored last in sleep.S.
*/
-enum { SLEEP_SAVE_SP = 0,
-
- SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
+enum { SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
SLEEP_SAVE_Ser1SDCR0,
- SLEEP_SAVE_SIZE
+ SLEEP_SAVE_COUNT
};
static int sa11x0_pm_enter(suspend_state_t state)
{
- unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE];
+ unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
gpio = GPLR;
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 065087afb77..d045812f339 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -332,7 +332,7 @@ ENTRY(arm925_dma_flush_range)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 997db8472b5..4cd33169a7c 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -295,7 +295,7 @@ ENTRY(arm926_dma_flush_range)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 44ead902bd5..1a3d63df8e9 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -222,7 +222,7 @@ ENTRY(arm940_dma_flush_range)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry
#else
- mcr p15, 0, r3, c7, c10, 2 @ clean D entry
+ mcr p15, 0, r3, c7, c6, 2 @ invalidate D entry
#endif
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 2218b0c0133..82d579ac9b9 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -265,7 +265,7 @@ ENTRY(arm946_dma_flush_range)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 72d34a23a2e..2db5580048d 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
#include <asm/io.h>
@@ -134,9 +135,17 @@ void clk_disable(struct clk *clk)
return;
spin_lock_irqsave(&clockfw_lock, flags);
- BUG_ON(clk->usecount == 0);
+ if (clk->usecount == 0) {
+ printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
if (arch_clock->clk_disable)
arch_clock->clk_disable(clk);
+
+out:
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 793740686be..39c637b0ffe 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -501,8 +501,6 @@ static inline void omap_enable_channel_irq(int lch)
/* Enable some nice interrupts. */
OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
-
- dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
static void omap_disable_channel_irq(int lch)
@@ -604,6 +602,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->data = data;
#ifndef CONFIG_ARCH_OMAP1
chan->chain_id = -1;
+ chan->next_linked_ch = -1;
#endif
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
@@ -1087,7 +1086,6 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
printk(KERN_ERR "omap_dma: Request failed %d\n", err);
return err;
}
- dma_chan[channels[i]].next_linked_ch = -1;
dma_chan[channels[i]].prev_linked_ch = -1;
dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 1945ddfec18..6f33f58bca4 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -355,7 +355,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
"failed to register mailbox interrupt:%d\n", ret);
goto fail_request_irq;
}
- enable_mbox_irq(mbox, IRQ_RX);
mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
if (!mq) {
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index d84167fb33b..3ac8d8d781b 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -411,7 +411,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
clk->parent = parent;
- if (clk == &s3c24xx_dclk0)
+ if (clk == &s3c24xx_clkout0)
mask = S3C2410_MISCCR_CLK0_MASK;
else {
source <<= 4;
@@ -437,7 +437,7 @@ struct clk s3c24xx_dclk0 = {
struct clk s3c24xx_dclk1 = {
.name = "dclk1",
.id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .ctrlbit = S3C2410_DCLKCON_DCLK1EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
.set_rate = s3c24xx_set_dclk_rate,
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index f197bb3a236..2f01af5f64c 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
/* rename any peripherals used differing from the s3c2410 */
+ s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
s3c_device_usbgadget.name = "s3c2440-usbgadget";