diff options
Diffstat (limited to 'arch/blackfin')
8 files changed, 77 insertions, 196 deletions
diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index 0292d58f936..aaeb4df10d5 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -11,6 +11,8 @@ #ifndef _SPI_CHANNEL_H_ #define _SPI_CHANNEL_H_ +#define MIN_SPI_BAUD_VAL 2 + #define SPI_READ 0 #define SPI_WRITE 1 @@ -122,6 +124,9 @@ struct bfin5xx_spi_chip { u8 bits_per_word; u8 cs_change_per_word; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ + u32 cs_gpio; + /* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */ + u16 idle_tx_val; }; #endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index e21c1c3e4ec..0fb2ce5d840 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -87,6 +87,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, @@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index e8c41fd842b..a625659dd67 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -87,6 +87,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, @@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, @@ -167,29 +171,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index 5f517f53b0f..a3789d7ccf8 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -74,6 +74,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -116,6 +117,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -130,6 +132,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART_RX, + IRQ_UART_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART_TX, CH_UART_RX, @@ -142,23 +145,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index 9e34700844a..b86662fb9de 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -87,6 +87,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -99,7 +100,6 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct timer_list cts_timer; int cts_pin; int rts_pin; #endif @@ -125,6 +125,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -140,6 +141,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, @@ -154,6 +156,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, @@ -167,29 +170,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index 3c2811ebecd..c536551eb4b 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -87,6 +87,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, @@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h index c05e79cba25..2d1b5fa3cca 100644 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -46,41 +46,27 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_SET_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v) -#define UART_CLEAR_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v) +#define UART_CLEAR_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_CLEAR_LSR(uart) bfin_write16(((uart)->port.membase + OFFSET_LSR), -1) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) #define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v) +#define UART_CLEAR_SCTS(uart) bfin_write16(((uart)->port.membase + OFFSET_MSR),SCTS) #define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */ #define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */ #define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) -#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS)) -#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS)) +#define UART_DISABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS|MRTS)) +#define UART_ENABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS) #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART2_CTS_PIN -# define CONFIG_UART2_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART2_RTS_PIN -# define CONFIG_UART2_RTS_PIN -1 -# endif +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) || \ + defined(CONFIG_BFIN_UART2_CTSRTS) || defined(CONFIG_BFIN_UART3_CTSRTS) +# define CONFIG_SERIAL_BFIN_HARD_CTSRTS #endif #define BFIN_UART_TX_FIFO_SIZE 2 @@ -91,6 +77,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -101,23 +88,24 @@ struct bfin_serial_port { unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct timer_list cts_timer; - int cts_pin; - int rts_pin; +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + int scts; + int cts_pin; + int rts_pin; #endif }; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + int uart_cts_pin; + int uart_rts_pin; #endif }; @@ -126,13 +114,14 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + 0, + 0, #endif }, #endif @@ -140,13 +129,14 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - 0, - 0, +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + GPIO_PE10, + GPIO_PE9, #endif }, #endif @@ -154,13 +144,14 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02100, IRQ_UART2_RX, + IRQ_UART2_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART2_TX, CH_UART2_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART2_CTS_PIN, - CONFIG_UART2_RTS_PIN, +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + 0, + 0, #endif }, #endif @@ -168,61 +159,17 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC03100, IRQ_UART3_RX, + IRQ_UART3_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART3_TX, CH_UART3_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - 0, - 0, +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + GPIO_PB3, + GPIO_PB2, #endif }, #endif }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); - -#ifdef CONFIG_BFIN_UART1_CTSRTS - peripheral_request(P_UART1_RTS, DRIVER_NAME); - peripheral_request(P_UART1_CTS, DRIVER_NAME); -#endif -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART2 - peripheral_request(P_UART2_TX, DRIVER_NAME); - peripheral_request(P_UART2_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART3 - peripheral_request(P_UART3_TX, DRIVER_NAME); - peripheral_request(P_UART3_RX, DRIVER_NAME); - -#ifdef CONFIG_BFIN_UART3_CTSRTS - peripheral_request(P_UART3_RTS, DRIVER_NAME); - peripheral_request(P_UART3_CTS, DRIVER_NAME); -#endif -#endif - SSYNC(); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index ca8c5f64520..a1b50878553 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -74,6 +74,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -116,6 +117,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -130,6 +132,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART_RX, + IRQ_UART_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART_TX, CH_UART_RX, @@ -142,23 +145,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} |