aboutsummaryrefslogtreecommitdiff
path: root/arch/cris/arch-v10/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/arch-v10/boot')
-rw-r--r--arch/cris/arch-v10/boot/.gitignore2
-rw-r--r--arch/cris/arch-v10/boot/Makefile20
-rw-r--r--arch/cris/arch-v10/boot/compressed/Makefile27
-rw-r--r--arch/cris/arch-v10/boot/compressed/README25
-rw-r--r--arch/cris/arch-v10/boot/compressed/decompress.lds30
-rw-r--r--arch/cris/arch-v10/boot/compressed/head.S126
-rw-r--r--arch/cris/arch-v10/boot/compressed/misc.c246
-rw-r--r--arch/cris/arch-v10/boot/rescue/Makefile35
-rw-r--r--arch/cris/arch-v10/boot/rescue/head.S360
-rw-r--r--arch/cris/arch-v10/boot/rescue/kimagerescue.S143
-rw-r--r--arch/cris/arch-v10/boot/rescue/rescue.lds20
-rw-r--r--arch/cris/arch-v10/boot/rescue/testrescue.S24
-rw-r--r--arch/cris/arch-v10/boot/tools/build.c287
13 files changed, 0 insertions, 1345 deletions
diff --git a/arch/cris/arch-v10/boot/.gitignore b/arch/cris/arch-v10/boot/.gitignore
deleted file mode 100644
index 171a0853caf..00000000000
--- a/arch/cris/arch-v10/boot/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Image
-zImage
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
deleted file mode 100644
index 21720301443..00000000000
--- a/arch/cris/arch-v10/boot/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v10/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage: $(obj)/compressed/vmlinux
- @cp $< $@
- @echo ' Kernel: $@ is ready'
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
deleted file mode 100644
index 6fe0ffaf3be..00000000000
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# arch/cris/arch-v10/boot/compressed/Makefile
-#
-
-asflags-y += $(LINUXINCLUDE)
-ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
- $(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
- $(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
-
diff --git a/arch/cris/arch-v10/boot/compressed/README b/arch/cris/arch-v10/boot/compressed/README
deleted file mode 100644
index 48b3db9924b..00000000000
--- a/arch/cris/arch-v10/boot/compressed/README
+++ /dev/null
@@ -1,25 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img.
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.lds b/arch/cris/arch-v10/boot/compressed/decompress.lds
deleted file mode 100644
index e80f4594d54..00000000000
--- a/arch/cris/arch-v10/boot/compressed/decompress.lds
+++ /dev/null
@@ -1,30 +0,0 @@
-/* OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_FORMAT(elf32-cris)
-
-MEMORY
- {
- dram : ORIGIN = 0x40700000,
- LENGTH = 0x00100000
- }
-
-SECTIONS
-{
- .text :
- {
- _stext = . ;
- *(.text)
- *(.rodata)
- *(.rodata.*)
- _etext = . ;
- } > dram
- .data :
- {
- *(.data)
- _edata = . ;
- } > dram
- .bss :
- {
- *(.bss)
- _end = ALIGN( 0x10 ) ;
- } > dram
-}
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
deleted file mode 100644
index 0bb4dcc2925..00000000000
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * arch/cris/boot/compressed/head.S
- *
- * Copyright (C) 1999, 2001 Axis Communications AB
- *
- * Code that sets up the DRAM registers, calls the
- * decompressor to unpack the piggybacked kernel, and jumps.
- *
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-#define RAM_INIT_MAGIC 0x56902387
-#define COMMAND_LINE_MAGIC 0x87109563
-
- ;; Exported symbols
-
- .globl input_data
-
-
- .text
-
- nop
- di
-
-;; We need to initialze DRAM registers before we start using the DRAM
-
- cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
- beq dram_init_finished
- nop
-
-#include "../../lib/dram_init.S"
-
-dram_init_finished:
-
- ;; Initiate the PA and PB ports
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
- move.b $r0, [R_PORT_PA_DATA]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
- move.b $r0, [R_PORT_PA_DIR]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
- move.b $r0, [R_PORT_PB_DATA]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
- move.b $r0, [R_PORT_PB_DIR]
-
- ;; Setup the stack to a suitably high address.
- ;; We assume 8 MB is the minimum DRAM in an eLinux
- ;; product and put the sp at the top for now.
-
- move.d 0x40800000, $sp
-
- ;; Figure out where the compressed piggyback image is
- ;; in the flash (since we wont try to copy it to DRAM
- ;; before unpacking). It is at _edata, but in flash.
- ;; Use (_edata - basse) as offset to the current PC.
-
-basse: move.d $pc, $r5
- and.d 0x7fffffff, $r5 ; strip any non-cache bit
- subq 2, $r5 ; compensate for the move.d $pc instr
- move.d $r5, $r0 ; save for later - flash address of 'basse'
- add.d _edata, $r5
- sub.d basse, $r5 ; $r5 = flash address of '_edata'
-
- ;; Copy text+data to DRAM
-
- move.d basse, $r1 ; destination
- move.d _edata, $r2 ; end destination
-1: move.w [$r0+], $r3
- move.w $r3, [$r1+]
- cmp.d $r2, $r1
- bcs 1b
- nop
-
- move.d $r5, [input_data] ; for the decompressor
-
-
- ;; Clear the decompressors BSS (between _edata and _end)
-
- moveq 0, $r0
- move.d _edata, $r1
- move.d _end, $r2
-1: move.w $r0, [$r1+]
- cmp.d $r2, $r1
- bcs 1b
- nop
-
- ;; Save command line magic and address.
- move.d _cmd_line_magic, $r12
- move.d $r10, [$r12]
- move.d _cmd_line_addr, $r12
- move.d $r11, [$r12]
-
- ;; Do the decompression and save compressed size in inptr
-
- jsr decompress_kernel
-
- ;; Put start address of root partition in $r9 so the kernel can use it
- ;; when mounting from flash
-
- move.d [input_data], $r9 ; flash address of compressed kernel
- add.d [inptr], $r9 ; size of compressed kernel
-
- ;; Restore command line magic and address.
- move.d _cmd_line_magic, $r10
- move.d [$r10], $r10
- move.d _cmd_line_addr, $r11
- move.d [$r11], $r11
-
- ;; Enter the decompressed kernel
- move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized
- jump 0x40004000 ; kernel is linked to this address
-
- .data
-
-input_data:
- .dword 0 ; used by the decompressor
-_cmd_line_magic:
- .dword 0
-_cmd_line_addr:
- .dword 0
-#include "../../lib/hw_settings.S"
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
deleted file mode 100644
index a4db1507d3b..00000000000
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n) memset((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-unsigned inptr = 0; /* index of next byte to be processed in inbuf
- * After decompression it will contain the
- * compressed size, and head.S will read it.
- */
-
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond, msg) do { \
- if (!(cond)) \
- error(msg); \
- } while (0)
-# define Trace(x) fprintf x
-# define Tracev(x) do { \
- if (verbose) \
- fprintf x; \
- } while (0)
-# define Tracevv(x) do { \
- if (verbose > 1) \
- fprintf x; \
- } while (0)
-# define Tracec(c, x) do { \
- if (verbose && (c)) \
- fprintf x; \
- } while (0)
-# define Tracecv(c, x) do { \
- if (verbose > 1 && (c)) \
- fprintf x; \
- } while (0)
-#else
-# define Assert(cond, msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c, x)
-# define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data; /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
- while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
- *R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
- *R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
- *R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
- *R_SERIAL3_TR_DATA = *s++;
-#endif
- }
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
- int i;
- char *ss = (char *)s;
-
- for (i = 0; i < n; i++)
- ss[i] = c;
-
- return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i = 0; i < __n; i++)
- d[i] = s[i];
-
- return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out = *in;
- out++;
- in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted\n");
-
- while (1); /* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
- output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
- char revision;
-
- /* input_data is set in head.S */
- inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- *R_SERIAL0_XOFF = 0;
- *R_SERIAL0_BAUD = 0x99;
- *R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- *R_SERIAL1_XOFF = 0;
- *R_SERIAL1_BAUD = 0x99;
- *R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- *R_GEN_CONFIG = 0x08;
- *R_SERIAL2_XOFF = 0;
- *R_SERIAL2_BAUD = 0x99;
- *R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- *R_GEN_CONFIG = 0x100;
- *R_SERIAL3_XOFF = 0;
- *R_SERIAL3_BAUD = 0x99;
- *R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
- setup_normal_output_buffer();
-
- makecrc();
-
- __asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 10) {
- puts("You need an ETRAX 100LX to run linux 2.6\n");
- while (1);
- }
-
- puts("Uncompressing Linux...\n");
- gunzip();
- puts("Done. Now booting the kernel.\n");
-}
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
deleted file mode 100644
index 82ab59b968e..00000000000
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-ccflags-y += -O2 $(LINUXINCLUDE)
-asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-$(obj)/rescue.o: $(OBJECT) FORCE
- $(call if_changed,ld)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
- $(call if_changed,objcopy)
- cp -p $(obj)/rescue.bin $(objtree)
-
-$(obj)/testrescue.bin: $(obj)/testrescue.o
- $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
-# Pad it to 784 bytes
- dd if=/dev/zero of=tmp2423 bs=1 count=784
- cat tr.bin tmp2423 >testrescue_tmp.bin
- dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
- rm tr.bin tmp2423 testrescue_tmp.bin
-
-$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
- $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
-# Pad it to 784 bytes, that's what the rescue loader expects
- dd if=/dev/zero of=tmp2423 bs=1 count=784
- cat ktr.bin tmp2423 >kimagerescue_tmp.bin
- dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
- rm ktr.bin tmp2423 kimagerescue_tmp.bin
diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/arch-v10/boot/rescue/head.S
deleted file mode 100644
index fb503d1eeea..00000000000
--- a/arch/cris/arch-v10/boot/rescue/head.S
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Rescue code, made to reside at the beginning of the
- * flash-memory. when it starts, it checks a partition
- * table at the first sector after the rescue sector.
- * the partition table was generated by the product builder
- * script and contains offsets, lengths, types and checksums
- * for each partition that this code should check.
- *
- * If any of the checksums fail, we assume the flash is so
- * corrupt that we cant use it to boot into the ftp flash
- * loader, and instead we initialize the serial port to
- * receive a flash-loader and new flash image. we dont include
- * any flash code here, but just accept a certain amount of
- * bytes from the serial port and jump into it. the downloaded
- * code is put in the cache.
- *
- * The partitiontable is designed so that it is transparent to
- * code execution - it has a relative branch opcode in the
- * beginning that jumps over it. each entry contains extra
- * data so we can add stuff later.
- *
- * Partition table format:
- *
- * Code transparency:
- *
- * 2 bytes [opcode 'nop']
- * 2 bytes [opcode 'di']
- * 4 bytes [opcode 'ba <offset>', 8-bit or 16-bit version]
- * 2 bytes [opcode 'nop', delay slot]
- *
- * Table validation (at +10):
- *
- * 2 bytes [magic/version word for partitiontable - 0xef, 0xbe]
- * 2 bytes [length of all entries plus the end marker]
- * 4 bytes [checksum for the partitiontable itself]
- *
- * Entries, each with the following format, last has offset -1:
- *
- * 4 bytes [offset in bytes, from start of flash]
- * 4 bytes [length in bytes of partition]
- * 4 bytes [checksum, simple longword sum]
- * 2 bytes [partition type]
- * 2 bytes [flags, only bit 0 used, ro/rw = 1/0]
- * 16 bytes [reserved for future use]
- *
- * End marker
- *
- * 4 bytes [-1]
- *
- * 10 bytes [0, padding]
- *
- * Bit 0 in flags signifies RW or RO. The rescue code only bothers
- * to check the checksum for RO partitions, since the others will
- * change their data without updating the checksums. A 1 in bit 0
- * means RO, 0 means RW. That way, it is possible to set a partition
- * in RO mode initially, and later mark it as RW, since you can always
- * write 0's to the flash.
- *
- * During the wait for serial input, the status LED will flash so the
- * user knows something went wrong.
- *
- * Copyright (C) 1999-2007 Axis Communications AB
- */
-
-#ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
- ;; The partitiontable is looked for at the first sector after the boot
- ;; sector. Sector size is 65536 bytes in all flashes we use.
-
-#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
-#define PTABLE_MAGIC 0xbeef
-
- ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
- ;; That is not where we put our downloaded serial boot-code.
- ;; The length is enough for downloading code that loads the rest
- ;; of itself (after having setup the DRAM etc).
- ;; It is the same length as the on-chip ROM loads, so the same
- ;; host loader can be used to load a rescued product as well as
- ;; one booted through the Etrax serial boot code.
-
-#define CODE_START 0x40000000
-#define CODE_LENGTH 784
-
-#ifdef CONFIG_ETRAX_RESCUE_SER0
-#define SERXOFF R_SERIAL0_XOFF
-#define SERBAUD R_SERIAL0_BAUD
-#define SERRECC R_SERIAL0_REC_CTRL
-#define SERRDAT R_SERIAL0_REC_DATA
-#define SERSTAT R_SERIAL0_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER1
-#define SERXOFF R_SERIAL1_XOFF
-#define SERBAUD R_SERIAL1_BAUD
-#define SERRECC R_SERIAL1_REC_CTRL
-#define SERRDAT R_SERIAL1_REC_DATA
-#define SERSTAT R_SERIAL1_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER2
-#define SERXOFF R_SERIAL2_XOFF
-#define SERBAUD R_SERIAL2_BAUD
-#define SERRECC R_SERIAL2_REC_CTRL
-#define SERRDAT R_SERIAL2_REC_DATA
-#define SERSTAT R_SERIAL2_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER3
-#define SERXOFF R_SERIAL3_XOFF
-#define SERBAUD R_SERIAL3_BAUD
-#define SERRECC R_SERIAL3_REC_CTRL
-#define SERRDAT R_SERIAL3_REC_DATA
-#define SERSTAT R_SERIAL3_STATUS
-#endif
-
-#define NOP_DI 0xf025050f
-#define RAM_INIT_MAGIC 0x56902387
-
- .text
-
- ;; This is the entry point of the rescue code
- ;; 0x80000000 if loaded in flash (as it should be)
- ;; Since etrax actually starts at address 2 when booting from flash, we
- ;; put a nop (2 bytes) here first so we dont accidentally skip the di
-
- nop
- di
-
- jump in_cache ; enter cached area instead
-in_cache:
-
-
- ;; First put a jump test to give a possibility of upgrading the
- ;; rescue code without erasing/reflashing the sector.
- ;; We put a longword of -1 here and if it is not -1, we jump using
- ;; the value as jump target. Since we can always change 1's to 0's
- ;; without erasing the sector, it is possible to add new
- ;; code after this and altering the jumptarget in an upgrade.
-
-jtcd: move.d [jumptarget], $r0
- cmp.d 0xffffffff, $r0
- beq no_newjump
- nop
-
- jump [$r0]
-
-jumptarget:
- .dword 0xffffffff ; can be overwritten later to insert new code
-
-no_newjump:
-#ifdef CONFIG_ETRAX_ETHERNET
- ;; Start MII clock to make sure it is running when tranceiver is reset
- move.d 0x3, $r0 ; enable = on, phy = mii_clk
- move.d $r0, [R_NETWORK_GEN_CONFIG]
-#endif
-
- ;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
-
- ;; we now should go through the checksum-table and check the listed
- ;; partitions for errors.
-
- move.d PTABLE_START, $r3
- move.d [$r3], $r0
- cmp.d NOP_DI, $r0 ; make sure the nop/di is there...
- bne do_rescue
- nop
-
- ;; skip the code transparency block (10 bytes).
-
- addq 10, $r3
-
- ;; check for correct magic
-
- move.w [$r3+], $r0
- cmp.w PTABLE_MAGIC, $r0
- bne do_rescue ; didn't recognize - trig rescue
- nop
-
- ;; check for correct ptable checksum
-
- movu.w [$r3+], $r2 ; ptable length
- move.d $r2, $r8 ; save for later, length of total ptable
- addq 28, $r8 ; account for the rest
- move.d [$r3+], $r4 ; ptable checksum
- move.d $r3, $r1
- jsr checksum ; r1 source, r2 length, returns in r0
-
- cmp.d $r0, $r4
- bne do_rescue ; didn't match - trig rescue
- nop
-
- ;; ptable is ok. validate each entry.
-
- moveq -1, $r7
-
-ploop: move.d [$r3+], $r1 ; partition offset (from ptable start)
- bne notfirst ; check if it is the partition containing ptable
- nop ; yes..
- move.d $r8, $r1 ; for its checksum check, skip the ptable
- move.d [$r3+], $r2 ; partition length
- sub.d $r8, $r2 ; minus the ptable length
- ba bosse
- nop
-notfirst:
- cmp.d -1, $r1 ; the end of the ptable ?
- beq flash_ok ; if so, the flash is validated
- move.d [$r3+], $r2 ; partition length
-bosse: move.d [$r3+], $r5 ; checksum
- move.d [$r3+], $r4 ; type and flags
- addq 16, $r3 ; skip the reserved bytes
- btstq 16, $r4 ; check ro flag
- bpl ploop ; rw partition, skip validation
- nop
- btstq 17, $r4 ; check bootable flag
- bpl 1f
- nop
- move.d $r1, $r7 ; remember boot partition offset
-1:
- add.d PTABLE_START, $r1
-
- jsr checksum ; checksum the partition
-
- cmp.d $r0, $r5
- beq ploop ; checksums matched, go to next entry
- nop
-
- ;; otherwise fall through to the rescue code.
-
-do_rescue:
- ;; setup port PA and PB default initial directions and data
- ;; (so we can flash LEDs, and so that DTR and others are set)
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
- move.b $r0, [R_PORT_PA_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
- move.b $r0, [R_PORT_PA_DATA]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
- move.b $r0, [R_PORT_PB_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
- move.b $r0, [R_PORT_PB_DATA]
-
- ;; setup the serial port at 115200 baud
-
- moveq 0, $r0
- move.d $r0, [SERXOFF]
-
- move.b 0x99, $r0
- move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive
-
- move.b 0x40, $r0 ; rec enable
- move.b $r0, [SERRECC]
-
- moveq 0, $r1 ; "timer" to clock out a LED red flash
- move.d CODE_START, $r3 ; destination counter
- movu.w CODE_LENGTH, $r4; length
-
-wait_ser:
- addq 1, $r1
-#ifndef CONFIG_ETRAX_NO_LEDS
-#ifdef CONFIG_ETRAX_PA_LEDS
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
-#endif
- move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
- btstq 16, $r1
- bpl 1f
- nop
- or.d $r0, $r2 ; set bit
- ba 2f
- nop
-1: not $r0 ; clear bit
- and.d $r0, $r2
-2:
-#ifdef CONFIG_ETRAX_PA_LEDS
- move.b $r2, [R_PORT_PA_DATA]
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
- move.b $r2, [R_PORT_PB_DATA]
-#endif
-#ifdef CONFIG_ETRAX_90000000_LEDS
- move.b $r2, [0x90000000]
-#endif
-#endif
-
- ;; check if we got something on the serial port
-
- move.b [SERSTAT], $r0
- btstq 0, $r0 ; data_avail
- bpl wait_ser
- nop
-
- ;; got something - copy the byte and loop
-
- move.b [SERRDAT], $r0
- move.b $r0, [$r3+]
-
- subq 1, $r4 ; decrease length
- bne wait_ser
- nop
-
- ;; jump into downloaded code
-
- move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is
- ; initialized
- jump CODE_START
-
-flash_ok:
- ;; check r7, which contains either -1 or the partition to boot from
-
- cmp.d -1, $r7
- bne 1f
- nop
- move.d PTABLE_START, $r7; otherwise use the ptable start
-1:
- move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is
- ; initialized
- jump $r7 ; boot!
-
-
- ;; Helper subroutines
-
- ;; Will checksum by simple addition
- ;; r1 - source
- ;; r2 - length in bytes
- ;; result will be in r0
-checksum:
- moveq 0, $r0
- moveq CONFIG_ETRAX_FLASH1_SIZE, $r6
-
- ;; If the first physical flash memory is exceeded wrap to the
- ;; second one
- btstq 26, $r1 ; Are we addressing first flash?
- bpl 1f
- nop
- clear.d $r6
-
-1: test.d $r6 ; 0 = no wrapping
- beq 2f
- nop
- lslq 20, $r6 ; Convert MB to bytes
- sub.d $r1, $r6
-
-2: addu.b [$r1+], $r0
- subq 1, $r6 ; Flash memory left
- beq 3f
- subq 1, $r2 ; Length left
- bne 2b
- nop
- ret
- nop
-
-3: move.d MEM_CSE1_START, $r1 ; wrap to second flash
- ba 2b
- nop
-
-#endif
diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/arch-v10/boot/rescue/kimagerescue.S
deleted file mode 100644
index 6f7b3e61260..00000000000
--- a/arch/cris/arch-v10/boot/rescue/kimagerescue.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Rescue code to be prepended on a kimage and copied to the
- * rescue serial port.
- * This is called from the rescue code, it will copy received data to
- * 4004000 and after a timeout jump to it.
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-#define CODE_START 0x40004000
-#define CODE_LENGTH 784
-#define TIMEOUT_VALUE 1000
-
-
-#ifdef CONFIG_ETRAX_RESCUE_SER0
-#define SERXOFF R_SERIAL0_XOFF
-#define SERBAUD R_SERIAL0_BAUD
-#define SERRECC R_SERIAL0_REC_CTRL
-#define SERRDAT R_SERIAL0_REC_DATA
-#define SERSTAT R_SERIAL0_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER1
-#define SERXOFF R_SERIAL1_XOFF
-#define SERBAUD R_SERIAL1_BAUD
-#define SERRECC R_SERIAL1_REC_CTRL
-#define SERRDAT R_SERIAL1_REC_DATA
-#define SERSTAT R_SERIAL1_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER2
-#define SERXOFF R_SERIAL2_XOFF
-#define SERBAUD R_SERIAL2_BAUD
-#define SERRECC R_SERIAL2_REC_CTRL
-#define SERRDAT R_SERIAL2_REC_DATA
-#define SERSTAT R_SERIAL2_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER3
-#define SERXOFF R_SERIAL3_XOFF
-#define SERBAUD R_SERIAL3_BAUD
-#define SERRECC R_SERIAL3_REC_CTRL
-#define SERRDAT R_SERIAL3_REC_DATA
-#define SERSTAT R_SERIAL3_STATUS
-#endif
-
- .text
- ;; This is the entry point of the rescue code
- ;; 0x80000000 if loaded in flash (as it should be)
- ;; since etrax actually starts at address 2 when booting from flash, we
- ;; put a nop (2 bytes) here first so we dont accidentally skip the di
-
- nop
- di
-#ifndef CONFIG_SVINTO_SIM
- ;; setup port PA and PB default initial directions and data
- ;; (so we can flash LEDs, and so that DTR and others are set)
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
- move.b $r0, [R_PORT_PA_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
- move.b $r0, [R_PORT_PA_DATA]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
- move.b $r0, [R_PORT_PB_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
- move.b $r0, [R_PORT_PB_DATA]
-
- ;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
-
-#endif
- ;; Setup the stack to a suitably high address.
- ;; We assume 8 MB is the minimum DRAM in an eLinux
- ;; product and put the sp at the top for now.
-
- move.d 0x40800000, $sp
-
- ;; setup the serial port at 115200 baud
-
- moveq 0, $r0
- move.d $r0, [SERXOFF]
-
- move.b 0x99, $r0
- move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit
- ; and receive
-
- move.b 0x40, $r0 ; rec enable
- move.b $r0, [SERRECC]
-
-
- moveq 0, $r1 ; "timer" to clock out a LED red flash
- move.d CODE_START, $r3 ; destination counter
- move.d CODE_LENGTH, $r4 ; length
- move.d TIMEOUT_VALUE, $r5 ; "timeout" until jump
-
-wait_ser:
- addq 1, $r1
- subq 1, $r5 ; decrease timeout
- beq jump_start ; timed out
- nop
-#ifndef CONFIG_ETRAX_NO_LEDS
-#ifdef CONFIG_ETRAX_PA_LEDS
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
-#endif
- move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
- btstq 16, $r1
- bpl 1f
- nop
- or.d $r0, $r2 ; set bit
- ba 2f
- nop
-1: not $r0 ; clear bit
- and.d $r0, $r2
-2:
-#ifdef CONFIG_ETRAX_PA_LEDS
- move.b $r2, [R_PORT_PA_DATA]
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
- move.b $r2, [R_PORT_PB_DATA]
-#endif
-#endif
-
- ;; check if we got something on the serial port
-
- move.b [SERSTAT], $r0
- btstq 0, $r0 ; data_avail
- bpl wait_ser
- nop
-
- ;; got something - copy the byte and loop
-
- move.b [SERRDAT], $r0
- move.b $r0, [$r3+]
- move.d TIMEOUT_VALUE, $r5 ; reset "timeout"
- subq 1, $r4 ; decrease length
- bne wait_ser
- nop
-jump_start:
- ;; jump into downloaded code
-
- jump CODE_START
diff --git a/arch/cris/arch-v10/boot/rescue/rescue.lds b/arch/cris/arch-v10/boot/rescue/rescue.lds
deleted file mode 100644
index 0b52a9490db..00000000000
--- a/arch/cris/arch-v10/boot/rescue/rescue.lds
+++ /dev/null
@@ -1,20 +0,0 @@
-MEMORY
- {
- flash : ORIGIN = 0x00000000,
- LENGTH = 0x00100000
- }
-
-SECTIONS
-{
- .text :
- {
- stext = . ;
- *(.text)
- etext = . ;
- } > flash
- .data :
- {
- *(.data)
- edata = . ;
- } > flash
-}
diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/arch-v10/boot/rescue/testrescue.S
deleted file mode 100644
index fc7ec674eca..00000000000
--- a/arch/cris/arch-v10/boot/rescue/testrescue.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Simple testcode to download by the rescue block.
- * Just lights some LEDs to show it was downloaded correctly.
- *
- * Copyright (C) 1999 Axis Communications AB
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
- .text
-
- nop
- nop
- moveq -1, $r2
- move.b $r2, [R_PORT_PA_DIR]
- moveq 0, $r2
- move.b $r2, [R_PORT_PA_DATA]
-
-endless:
- nop
- ba endless
- nop
-
diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/arch-v10/boot/tools/build.c
deleted file mode 100644
index c8adef36416..00000000000
--- a/arch/cris/arch-v10/boot/tools/build.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * linux/tools/build.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-/*
- * This file builds a disk-image from three different files:
- *
- * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
- * - setup: 8086 machine code, sets up system parm
- * - system: 80386 code for actual system
- *
- * It does some checking that all files are of the correct type, and
- * just writes the result to stdout, removing headers and padding to
- * the right amount. It also writes some system data to stderr.
- */
-
-/*
- * Changes by tytso to allow root device specification
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- * Cross compiling fixes by Gertjan van Wingerde, July 1996
- */
-
-#include <stdio.h> /* fprintf */
-#include <string.h>
-#include <stdlib.h> /* contains exit */
-#include <sys/types.h> /* unistd.h needs this */
-#include <sys/stat.h>
-#include <sys/sysmacros.h>
-#include <unistd.h> /* contains read/write */
-#include <fcntl.h>
-#include <errno.h>
-
-#define MINIX_HEADER 32
-
-#define N_MAGIC_OFFSET 1024
-#ifndef __BFD__
-static int GCC_HEADER = sizeof(struct exec);
-#endif
-
-#ifdef __BIG_KERNEL__
-#define SYS_SIZE 0xffff
-#else
-#define SYS_SIZE DEF_SYSSIZE
-#endif
-
-#define DEFAULT_MAJOR_ROOT 0
-#define DEFAULT_MINOR_ROOT 0
-
-/* max nr of sectors of setup: don't change unless you also change
- * bootsect etc */
-#define SETUP_SECTS 4
-
-#define STRINGIFY(x) #x
-
-typedef union {
- int i;
- long l;
- short s[2];
- char b[4];
-} conv;
-
-long intel_long(long l)
-{
- conv t;
-
- t.b[0] = l & 0xff; l >>= 8;
- t.b[1] = l & 0xff; l >>= 8;
- t.b[2] = l & 0xff; l >>= 8;
- t.b[3] = l & 0xff; l >>= 8;
- return t.l;
-}
-
-int intel_int(int i)
-{
- conv t;
-
- t.b[0] = i & 0xff; i >>= 8;
- t.b[1] = i & 0xff; i >>= 8;
- t.b[2] = i & 0xff; i >>= 8;
- t.b[3] = i & 0xff; i >>= 8;
- return t.i;
-}
-
-short intel_short(short l)
-{
- conv t;
-
- t.b[0] = l & 0xff; l >>= 8;
- t.b[1] = l & 0xff; l >>= 8;
- return t.s[0];
-}
-
-void die(const char * str)
-{
- fprintf(stderr,"%s\n",str);
- exit(1);
-}
-
-void usage(void)
-{
- die("Usage: build bootsect setup system [rootdev] [> image]");
-}
-
-int main(int argc, char ** argv)
-{
- int i,c,id,sz,tmp_int;
- unsigned long sys_size, tmp_long;
- char buf[1024];
-#ifndef __BFD__
- struct exec *ex = (struct exec *)buf;
-#endif
- char major_root, minor_root;
- struct stat sb;
- unsigned char setup_sectors;
-
- if ((argc < 4) || (argc > 5))
- usage();
- if (argc > 4) {
- if (!strcmp(argv[4], "CURRENT")) {
- if (stat("/", &sb)) {
- perror("/");
- die("Couldn't stat /");
- }
- major_root = major(sb.st_dev);
- minor_root = minor(sb.st_dev);
- } else if (strcmp(argv[4], "FLOPPY")) {
- if (stat(argv[4], &sb)) {
- perror(argv[4]);
- die("Couldn't stat root device.");
- }
- major_root = major(sb.st_rdev);
- minor_root = minor(sb.st_rdev);
- } else {
- major_root = 0;
- minor_root = 0;
- }
- } else {
- major_root = DEFAULT_MAJOR_ROOT;
- minor_root = DEFAULT_MINOR_ROOT;
- }
- fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
- for (i=0;i<sizeof buf; i++) buf[i]=0;
- if ((id=open(argv[1],O_RDONLY,0))<0)
- die("Unable to open 'boot'");
- if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
- die("Unable to read header of 'boot'");
- if (((long *) buf)[0]!=intel_long(0x04100301))
- die("Non-Minix header of 'boot'");
- if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
- die("Non-Minix header of 'boot'");
- if (((long *) buf)[3] != 0)
- die("Illegal data segment in 'boot'");
- if (((long *) buf)[4] != 0)
- die("Illegal bss in 'boot'");
- if (((long *) buf)[5] != 0)
- die("Non-Minix header of 'boot'");
- if (((long *) buf)[7] != 0)
- die("Illegal symbol table in 'boot'");
- i=read(id,buf,sizeof buf);
- fprintf(stderr,"Boot sector %d bytes.\n",i);
- if (i != 512)
- die("Boot block must be exactly 512 bytes");
- if ((*(unsigned short *)(buf+510)) != (unsigned short)intel_short(0xAA55))
- die("Boot block hasn't got boot flag (0xAA55)");
- buf[508] = (char) minor_root;
- buf[509] = (char) major_root;
- i=write(1,buf,512);
- if (i!=512)
- die("Write call failed");
- close (id);
-
- if ((id=open(argv[2],O_RDONLY,0))<0)
- die("Unable to open 'setup'");
- if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
- die("Unable to read header of 'setup'");
- if (((long *) buf)[0]!=intel_long(0x04100301))
- die("Non-Minix header of 'setup'");
- if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
- die("Non-Minix header of 'setup'");
- if (((long *) buf)[3] != 0)
- die("Illegal data segment in 'setup'");
- if (((long *) buf)[4] != 0)
- die("Illegal bss in 'setup'");
- if (((long *) buf)[5] != 0)
- die("Non-Minix header of 'setup'");
- if (((long *) buf)[7] != 0)
- die("Illegal symbol table in 'setup'");
- for (i=0 ; (c=read(id,buf,sizeof buf))>0 ; i+=c )
-#ifdef __BIG_KERNEL__
- {
- if (!i) {
- /* Working with memcpy because of alignment constraints
- on Sparc - Gertjan */
- memcpy(&tmp_long, &buf[2], sizeof(long));
- if (tmp_long != intel_long(0x53726448) )
- die("Wrong magic in loader header of 'setup'");
- memcpy(&tmp_int, &buf[6], sizeof(int));
- if (tmp_int < intel_int(0x200))
- die("Wrong version of loader header of 'setup'");
- buf[0x11] = 1; /* LOADED_HIGH */
- tmp_long = intel_long(0x100000);
- memcpy(&buf[0x14], &tmp_long, sizeof(long)); /* code32_start */
- }
-#endif
- if (write(1,buf,c)!=c)
- die("Write call failed");
-#ifdef __BIG_KERNEL__
- }
-#endif
- if (c != 0)
- die("read-error on 'setup'");
- close (id);
- setup_sectors = (unsigned char)((i + 511) / 512);
- /* for compatibility with LILO */
- if (setup_sectors < SETUP_SECTS)
- setup_sectors = SETUP_SECTS;
- fprintf(stderr,"Setup is %d bytes.\n",i);
- for (c=0 ; c<sizeof(buf) ; c++)
- buf[c] = '\0';
- while (i < setup_sectors * 512) {
- c = setup_sectors * 512 - i;
- if (c > sizeof(buf))
- c = sizeof(buf);
- if (write(1,buf,c) != c)
- die("Write call failed");
- i += c;
- }
-
- if ((id=open(argv[3],O_RDONLY,0))<0)
- die("Unable to open 'system'");
-#ifndef __BFD__
- if (read(id,buf,GCC_HEADER) != GCC_HEADER)
- die("Unable to read header of 'system'");
- if (N_MAGIC(*ex) == ZMAGIC) {
- GCC_HEADER = N_MAGIC_OFFSET;
- lseek(id, GCC_HEADER, SEEK_SET);
- } else if (N_MAGIC(*ex) != QMAGIC)
- die("Non-GCC header of 'system'");
- fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n",
- (ex->a_text+ex->a_data+ex->a_bss)/1024,
- ex->a_text /1024,
- ex->a_data /1024,
- ex->a_bss /1024);
- sz = N_SYMOFF(*ex) - GCC_HEADER + 4;
-#else
- if (fstat (id, &sb)) {
- perror ("fstat");
- die ("Unable to stat 'system'");
- }
- sz = sb.st_size;
- fprintf (stderr, "System is %d kB\n", sz/1024);
-#endif
- sys_size = (sz + 15) / 16;
- if (sys_size > SYS_SIZE)
- die("System is too big");
- while (sz > 0) {
- int l, n;
-
- l = sz;
- if (l > sizeof(buf))
- l = sizeof(buf);
- if ((n=read(id, buf, l)) != l) {
- if (n == -1)
- perror(argv[1]);
- else
- fprintf(stderr, "Unexpected EOF\n");
- die("Can't read 'system'");
- }
- if (write(1, buf, l) != l)
- die("Write failed");
- sz -= l;
- }
- close(id);
- if (lseek(1, 497, 0) == 497) {
- if (write(1, &setup_sectors, 1) != 1)
- die("Write of setup sectors failed");
- }
- if (lseek(1,500,0) == 500) {
- buf[0] = (sys_size & 0xff);
- buf[1] = ((sys_size >> 8) & 0xff);
- if (write(1, buf, 2) != 2)
- die("Write failed");
- }
- return(0);
-}