diff options
Diffstat (limited to 'arch/i386/kernel/cpu/cpufreq/longhaul.c')
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/longhaul.c | 97 |
1 files changed, 56 insertions, 41 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 43bbf948d45..f5cc9f5c9ba 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -53,19 +53,26 @@ #define CPU_NEHEMIAH 5 static int cpu_model; -static unsigned int numscales=16, numvscales; +static unsigned int numscales=16; static unsigned int fsb; -static int minvid, maxvid; + +static struct mV_pos *vrm_mV_table; +static unsigned char *mV_vrm_table; +struct f_msr { + unsigned char vrm; +}; +static struct f_msr f_msr_table[32]; + +static unsigned int highest_speed, lowest_speed; /* kHz */ static unsigned int minmult, maxmult; static int can_scale_voltage; -static int vrmrev; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; -static int port22_en = 0; +static int port22_en; /* Module parameters */ -static int dont_scale_voltage; -static int ignore_latency = 0; +static int scale_voltage; +static int ignore_latency; #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) @@ -73,7 +80,6 @@ static int ignore_latency = 0; /* Clock ratios multiplied by 10 */ static int clock_ratio[32]; static int eblcr_table[32]; -static int voltage_table[32]; static unsigned int highest_speed, lowest_speed; /* kHz */ static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; @@ -163,6 +169,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; longhaul.bits.EnableSoftBusRatio = 1; + if (can_scale_voltage) { + longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm; + longhaul.bits.EnableSoftVID = 1; + } + /* Sync to timer tick */ safe_halt(); /* Change frequency on next halt or sleep */ @@ -454,53 +465,57 @@ static int __init longhaul_get_ranges(void) static void __init longhaul_setup_voltagescaling(void) { union msr_longhaul longhaul; + struct mV_pos minvid, maxvid; + unsigned int j, speed, pos, kHz_step, numvscales; - rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); - - if (!(longhaul.bits.RevisionID & 1)) + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + if (!(longhaul.bits.RevisionID & 1)) { + printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); return; + } + + if (!longhaul.bits.VRMRev) { + printk (KERN_INFO PFX "VRM 8.5\n"); + vrm_mV_table = &vrm85_mV[0]; + mV_vrm_table = &mV_vrm85[0]; + } else { + printk (KERN_INFO PFX "Mobile VRM\n"); + vrm_mV_table = &mobilevrm_mV[0]; + mV_vrm_table = &mV_mobilevrm[0]; + } - minvid = longhaul.bits.MinimumVID; - maxvid = longhaul.bits.MaximumVID; - vrmrev = longhaul.bits.VRMRev; + minvid = vrm_mV_table[longhaul.bits.MinimumVID]; + maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; + numvscales = maxvid.pos - minvid.pos + 1; + kHz_step = (highest_speed - lowest_speed) / numvscales; - if (minvid == 0 || maxvid == 0) { + if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " "Voltage scaling disabled.\n", - minvid/1000, minvid%1000, maxvid/1000, maxvid%1000); + minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000); return; } - if (minvid == maxvid) { + if (minvid.mV == maxvid.mV) { printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are " "both %d.%03d. Voltage scaling disabled\n", - maxvid/1000, maxvid%1000); + maxvid.mV/1000, maxvid.mV%1000); return; } - if (vrmrev==0) { - dprintk ("VRM 8.5\n"); - memcpy (voltage_table, vrm85scales, sizeof(voltage_table)); - numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25; - } else { - dprintk ("Mobile VRM\n"); - memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table)); - numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5; + printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", + maxvid.mV/1000, maxvid.mV%1000, + minvid.mV/1000, minvid.mV%1000, + numvscales); + + j = 0; + while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { + speed = longhaul_table[j].frequency; + pos = (speed - lowest_speed) / kHz_step + minvid.pos; + f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos]; + j++; } - /* Current voltage isn't readable at first, so we need to - set it to a known value. The spec says to use maxvid */ - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; /* FIXME: This is bad. */ - longhaul.bits.EnableSoftVID = 1; - longhaul.bits.SoftVID = maxvid; - wrmsrl (MSR_VIA_LONGHAUL, longhaul.val); - - minvid = voltage_table[minvid]; - maxvid = voltage_table[maxvid]; - - dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n", - maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales); - can_scale_voltage = 1; } @@ -685,7 +700,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) return ret; if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) && - (dont_scale_voltage==0)) + (scale_voltage != 0)) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; @@ -773,8 +788,8 @@ static void __exit longhaul_exit(void) kfree(longhaul_table); } -module_param (dont_scale_voltage, int, 0644); -MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor"); +module_param (scale_voltage, int, 0644); +MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); module_param(ignore_latency, int, 0644); MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test"); |