diff options
Diffstat (limited to 'arch/i386/kernel/cpu')
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/Kconfig | 3 | ||||
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 3 | ||||
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/longhaul.c | 221 | ||||
| -rw-r--r-- | arch/i386/kernel/cpu/intel_cacheinfo.c | 2 | ||||
| -rw-r--r-- | arch/i386/kernel/cpu/mcheck/mce.h | 2 |
5 files changed, 134 insertions, 97 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index e44a4c6a4fe..ccc1edff5c9 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -96,6 +96,7 @@ config X86_POWERNOW_K8_ACPI config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" + depends on PCI help This add the CPUFreq driver for NatSemi Geode processors which support suspend modulation. @@ -202,7 +203,7 @@ config X86_LONGRUN config X86_LONGHAUL tristate "VIA Cyrix III Longhaul" select CPU_FREQ_TABLE - depends on BROKEN + depends on ACPI_PROCESSOR help This adds the CPUFreq driver for VIA Samuel/CyrixIII, VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 567b39bea07..efb41e81351 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -384,8 +384,7 @@ static int acpi_cpufreq_early_init_acpi(void) } /* Do initialization in ACPI core */ - acpi_processor_preregister_performance(acpi_perf_data); - return 0; + return acpi_processor_preregister_performance(acpi_perf_data); } static int diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 146f607e9c4..4f2c3aeef72 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -29,11 +29,13 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/string.h> -#include <linux/pci.h> #include <asm/msr.h> #include <asm/timex.h> #include <asm/io.h> +#include <asm/acpi.h> +#include <linux/acpi.h> +#include <acpi/processor.h> #include "longhaul.h" @@ -56,6 +58,8 @@ static int minvid, maxvid; static unsigned int minmult, maxmult; static int can_scale_voltage; static int vrmrev; +static struct acpi_processor *pr = NULL; +static struct acpi_processor_cx *cx = NULL; /* Module parameters */ static int dont_scale_voltage; @@ -118,84 +122,65 @@ static int longhaul_get_cpu_mult(void) return eblcr_table[invalue]; } +/* For processor with BCR2 MSR */ -static void do_powersaver(union msr_longhaul *longhaul, - unsigned int clock_ratio_index) +static void do_longhaul1(int cx_address, unsigned int clock_ratio_index) { - struct pci_dev *dev; - unsigned long flags; - unsigned int tmp_mask; - int version; - int i; - u16 pci_cmd; - u16 cmd_state[64]; + union msr_bcr2 bcr2; + u32 t; - switch (cpu_model) { - case CPU_EZRA_T: - version = 3; - break; - case CPU_NEHEMIAH: - version = 0xf; - break; - default: - return; - } + rdmsrl(MSR_VIA_BCR2, bcr2.val); + /* Enable software clock multiplier */ + bcr2.bits.ESOFTBF = 1; + bcr2.bits.CLOCKMUL = clock_ratio_index; - rdmsrl(MSR_VIA_LONGHAUL, longhaul->val); - longhaul->bits.SoftBusRatio = clock_ratio_index & 0xf; - longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; - longhaul->bits.EnableSoftBusRatio = 1; - longhaul->bits.RevisionKey = 0; + /* Sync to timer tick */ + safe_halt(); + ACPI_FLUSH_CPU_CACHE(); + /* Change frequency on next halt or sleep */ + wrmsrl(MSR_VIA_BCR2, bcr2.val); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + + /* Disable software clock multiplier */ + local_irq_disable(); + rdmsrl(MSR_VIA_BCR2, bcr2.val); + bcr2.bits.ESOFTBF = 0; + wrmsrl(MSR_VIA_BCR2, bcr2.val); +} - preempt_disable(); - local_irq_save(flags); +/* For processor with Longhaul MSR */ - /* - * get current pci bus master state for all devices - * and clear bus master bit - */ - dev = NULL; - i = 0; - do { - dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); - if (dev != NULL) { - pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); - cmd_state[i++] = pci_cmd; - pci_cmd &= ~PCI_COMMAND_MASTER; - pci_write_config_word(dev, PCI_COMMAND, pci_cmd); - } - } while (dev != NULL); +static void do_powersaver(int cx_address, unsigned int clock_ratio_index) +{ + union msr_longhaul longhaul; + u32 t; - tmp_mask=inb(0x21); /* works on C3. save mask. */ - outb(0xFE,0x21); /* TMR0 only */ - outb(0xFF,0x80); /* delay */ + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + longhaul.bits.RevisionKey = longhaul.bits.RevisionID; + longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; + longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; + longhaul.bits.EnableSoftBusRatio = 1; + /* Sync to timer tick */ safe_halt(); - wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); - halt(); - + ACPI_FLUSH_CPU_CACHE(); + /* Change frequency on next halt or sleep */ + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + + /* Disable bus ratio bit */ local_irq_disable(); - - outb(tmp_mask,0x21); /* restore mask */ - - /* restore pci bus master state for all devices */ - dev = NULL; - i = 0; - do { - dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); - if (dev != NULL) { - pci_cmd = cmd_state[i++]; - pci_write_config_byte(dev, PCI_COMMAND, pci_cmd); - } - } while (dev != NULL); - local_irq_restore(flags); - preempt_enable(); - - /* disable bus ratio bit */ - rdmsrl(MSR_VIA_LONGHAUL, longhaul->val); - longhaul->bits.EnableSoftBusRatio = 0; - longhaul->bits.RevisionKey = version; - wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); + longhaul.bits.RevisionKey = longhaul.bits.RevisionID; + longhaul.bits.EnableSoftBusRatio = 0; + longhaul.bits.EnableSoftBSEL = 0; + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); } /** @@ -209,9 +194,9 @@ static void longhaul_setstate(unsigned int clock_ratio_index) { int speed, mult; struct cpufreq_freqs freqs; - union msr_longhaul longhaul; - union msr_bcr2 bcr2; static unsigned int old_ratio=-1; + unsigned long flags; + unsigned int pic1_mask, pic2_mask; if (old_ratio == clock_ratio_index) return; @@ -234,6 +219,20 @@ static void longhaul_setstate(unsigned int clock_ratio_index) dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", fsb, mult/10, mult%10, print_speed(speed/1000)); + preempt_disable(); + local_irq_save(flags); + + pic2_mask = inb(0xA1); + pic1_mask = inb(0x21); /* works on C3. save mask. */ + outb(0xFF,0xA1); /* Overkill */ + outb(0xFE,0x21); /* TMR0 only */ + + /* Disable bus master arbitration */ + if (pr->flags.bm_check) { + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1, + ACPI_MTX_DO_NOT_LOCK); + } + switch (longhaul_version) { /* @@ -245,20 +244,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) */ case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - rdmsrl (MSR_VIA_BCR2, bcr2.val); - /* Enable software clock multiplier */ - bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = clock_ratio_index; - local_irq_disable(); - wrmsrl (MSR_VIA_BCR2, bcr2.val); - safe_halt(); - - /* Disable software clock multiplier */ - rdmsrl (MSR_VIA_BCR2, bcr2.val); - bcr2.bits.ESOFTBF = 0; - local_irq_disable(); - wrmsrl (MSR_VIA_BCR2, bcr2.val); - local_irq_enable(); + do_longhaul1(cx->address, clock_ratio_index); break; /* @@ -273,10 +259,22 @@ static void longhaul_setstate(unsigned int clock_ratio_index) * to work in practice. */ case TYPE_POWERSAVER: - do_powersaver(&longhaul, clock_ratio_index); + do_powersaver(cx->address, clock_ratio_index); break; } + /* Enable bus master arbitration */ + if (pr->flags.bm_check) { + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, + ACPI_MTX_DO_NOT_LOCK); + } + + outb(pic2_mask,0xA1); /* restore mask */ + outb(pic1_mask,0x21); + + local_irq_restore(flags); + preempt_enable(); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -324,9 +322,11 @@ static int guess_fsb(void) static int __init longhaul_get_ranges(void) { unsigned long invalue; - unsigned int multipliers[32]= { - 50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65, - -1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 }; + unsigned int ezra_t_multipliers[32]= { + 90, 30, 40, 100, 55, 35, 45, 95, + 50, 70, 80, 60, 120, 75, 85, 65, + -1, 110, 120, -1, 135, 115, 125, 105, + 130, 150, 160, 140, -1, 155, -1, 145 }; unsigned int j, k = 0; union msr_longhaul longhaul; unsigned long lo, hi; @@ -355,13 +355,13 @@ static int __init longhaul_get_ranges(void) invalue = longhaul.bits.MaxMHzBR; if (longhaul.bits.MaxMHzBR4) invalue += 16; - maxmult=multipliers[invalue]; + maxmult=ezra_t_multipliers[invalue]; invalue = longhaul.bits.MinMHzBR; if (longhaul.bits.MinMHzBR4 == 1) minmult = 30; else - minmult = multipliers[invalue]; + minmult = ezra_t_multipliers[invalue]; fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB]; break; } @@ -527,6 +527,18 @@ static unsigned int longhaul_get(unsigned int cpu) return calc_speed(longhaul_get_cpu_mult()); } +static acpi_status longhaul_walk_callback(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_device *d; + + if ( acpi_bus_get_device(obj_handle, &d) ) { + return 0; + } + *return_value = (void *)acpi_driver_data(d); + return 1; +} static int __init longhaul_cpu_init(struct cpufreq_policy *policy) { @@ -534,6 +546,15 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) char *cpuname=NULL; int ret; + /* Check ACPI support for C3 state */ + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, + &longhaul_walk_callback, NULL, (void *)&pr); + if (pr == NULL) goto err_acpi; + + cx = &pr->power.states[ACPI_STATE_C3]; + if (cx->address == 0 || cx->latency > 1000) goto err_acpi; + + /* Now check what we have on this motherboard */ switch (c->x86_model) { case 6: cpu_model = CPU_SAMUEL; @@ -634,6 +655,10 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu); return 0; + +err_acpi: + printk(KERN_ERR PFX "No ACPI support for CPU frequency changes.\n"); + return -ENODEV; } static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) @@ -666,6 +691,18 @@ static int __init longhaul_init(void) if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6) return -ENODEV; +#ifdef CONFIG_SMP + if (num_online_cpus() > 1) { + return -ENODEV; + printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n"); + } +#endif +#ifdef CONFIG_X86_IO_APIC + if (cpu_has_apic) { + printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n"); + return -ENODEV; + } +#endif switch (c->x86_model) { case 6 ... 9: return cpufreq_register_driver(&longhaul_driver); @@ -699,6 +736,6 @@ MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>"); MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); MODULE_LICENSE ("GPL"); -module_init(longhaul_init); +late_initcall(longhaul_init); module_exit(longhaul_exit); diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index e9f0b928b0a..5c43be47587 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -759,7 +759,7 @@ static int __cpuinit cache_sysfs_init(void) if (num_cache_leaves == 0) return 0; - register_cpu_notifier(&cacheinfo_cpu_notifier); + register_hotcpu_notifier(&cacheinfo_cpu_notifier); for_each_online_cpu(i) { cacheinfo_cpu_callback(&cacheinfo_cpu_notifier, CPU_ONLINE, diff --git a/arch/i386/kernel/cpu/mcheck/mce.h b/arch/i386/kernel/cpu/mcheck/mce.h index dc2416dfef1..84fd4cf7d0f 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.h +++ b/arch/i386/kernel/cpu/mcheck/mce.h @@ -9,6 +9,6 @@ void winchip_mcheck_init(struct cpuinfo_x86 *c); /* Call the installed machine check handler for this CPU setup. */ extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code); -extern int mce_disabled __initdata; +extern int mce_disabled; extern int nr_mce_banks; |