aboutsummaryrefslogtreecommitdiff
path: root/arch/i386/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/head.S')
-rw-r--r--arch/i386/kernel/head.S118
1 files changed, 30 insertions, 88 deletions
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
index 3fa7f9389af..9b10af65faa 100644
--- a/arch/i386/kernel/head.S
+++ b/arch/i386/kernel/head.S
@@ -34,17 +34,32 @@
/*
* This is how much memory *in addition to the memory covered up to
- * and including _end* we need mapped initially. We need one bit for
- * each possible page, but only in low memory, which means
- * 2^32/4096/8 = 128K worst case (4G/4G split.)
+ * and including _end* we need mapped initially.
+ * We need:
+ * - one bit for each possible page, but only in low memory, which means
+ * 2^32/4096/8 = 128K worst case (4G/4G split.)
+ * - enough space to map all low memory, which means
+ * (2^32/4096) / 1024 pages (worst case, non PAE)
+ * (2^32/4096) / 512 + 4 pages (worst case for PAE)
+ * - a few pages for allocator use before the kernel pagetable has
+ * been set up
*
* Modulo rounding, each megabyte assigned here requires a kilobyte of
* memory, which is currently unreclaimed.
*
* This should be a multiple of a page.
*/
-#define INIT_MAP_BEYOND_END (128*1024)
+LOW_PAGES = 1<<(32-PAGE_SHIFT_asm)
+#if PTRS_PER_PMD > 1
+PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PMD) + PTRS_PER_PGD
+#else
+PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PGD)
+#endif
+BOOTBITMAP_SIZE = LOW_PAGES / 8
+ALLOCATOR_SLOP = 4
+
+INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE + (PAGE_TABLE_SIZE + ALLOCATOR_SLOP)*PAGE_SIZE_asm
/*
* 32-bit kernel entrypoint; only used by the boot CPU. On entry,
@@ -147,8 +162,7 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
/*
* Non-boot CPU entry point; entered from trampoline.S
* We can't lgdt here, because lgdt itself uses a data segment, but
- * we know the trampoline has already loaded the boot_gdt_table GDT
- * for us.
+ * we know the trampoline has already loaded the boot_gdt for us.
*
* If cpu hotplug is not supported then this code can go in init section
* which will be freed later
@@ -318,12 +332,12 @@ is386: movl $2,%ecx # set MP
movl %eax,%cr0
call check_x87
- call setup_pda
lgdt early_gdt_descr
lidt idt_descr
ljmp $(__KERNEL_CS),$1f
1: movl $(__KERNEL_DS),%eax # reload all the segment registers
movl %eax,%ss # after changing gdt.
+ movl %eax,%fs # gets reset once there's real percpu
movl $(__USER_DS),%eax # DS/ES contains default USER segment
movl %eax,%ds
@@ -333,16 +347,17 @@ is386: movl $2,%ecx # set MP
movl %eax,%gs
lldt %ax
- movl $(__KERNEL_PDA),%eax
- mov %eax,%fs
-
cld # gcc2 wants the direction flag cleared at all times
pushl $0 # fake return address for unwinder
#ifdef CONFIG_SMP
movb ready, %cl
movb $1, ready
cmpb $0,%cl # the first CPU calls start_kernel
- jne initialize_secondary # all other CPUs call initialize_secondary
+ je 1f
+ movl $(__KERNEL_PERCPU), %eax
+ movl %eax,%fs # set this cpu's percpu
+ jmp initialize_secondary # all other CPUs call initialize_secondary
+1:
#endif /* CONFIG_SMP */
jmp start_kernel
@@ -366,23 +381,6 @@ check_x87:
ret
/*
- * Point the GDT at this CPU's PDA. On boot this will be
- * cpu_gdt_table and boot_pda; for secondary CPUs, these will be
- * that CPU's GDT and PDA.
- */
-ENTRY(setup_pda)
- /* get the PDA pointer */
- movl start_pda, %eax
-
- /* slot the PDA address into the GDT */
- mov early_gdt_descr+2, %ecx
- mov %ax, (__KERNEL_PDA+0+2)(%ecx) /* base & 0x0000ffff */
- shr $16, %eax
- mov %al, (__KERNEL_PDA+4+0)(%ecx) /* base & 0x00ff0000 */
- mov %ah, (__KERNEL_PDA+4+3)(%ecx) /* base & 0xff000000 */
- ret
-
-/*
* setup_idt
*
* sets up a idt with 256 entries pointing to
@@ -554,9 +552,6 @@ ENTRY(empty_zero_page)
* This starts the data section.
*/
.data
-ENTRY(start_pda)
- .long boot_pda
-
ENTRY(stack_start)
.long init_thread_union+THREAD_SIZE
.long __BOOT_DS
@@ -588,7 +583,7 @@ fault_msg:
.word 0 # 32 bit align gdt_desc.address
boot_gdt_descr:
.word __BOOT_DS+7
- .long boot_gdt_table - __PAGE_OFFSET
+ .long boot_gdt - __PAGE_OFFSET
.word 0 # 32-bit align idt_desc.address
idt_descr:
@@ -599,67 +594,14 @@ idt_descr:
.word 0 # 32 bit align gdt_desc.address
ENTRY(early_gdt_descr)
.word GDT_ENTRIES*8-1
- .long cpu_gdt_table
+ .long per_cpu__gdt_page /* Overwritten for secondary CPUs */
/*
- * The boot_gdt_table must mirror the equivalent in setup.S and is
+ * The boot_gdt must mirror the equivalent in setup.S and is
* used only for booting.
*/
.align L1_CACHE_BYTES
-ENTRY(boot_gdt_table)
+ENTRY(boot_gdt)
.fill GDT_ENTRY_BOOT_CS,8,0
.quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */
.quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */
-
-/*
- * The Global Descriptor Table contains 28 quadwords, per-CPU.
- */
- .align L1_CACHE_BYTES
-ENTRY(cpu_gdt_table)
- .quad 0x0000000000000000 /* NULL descriptor */
- .quad 0x0000000000000000 /* 0x0b reserved */
- .quad 0x0000000000000000 /* 0x13 reserved */
- .quad 0x0000000000000000 /* 0x1b reserved */
- .quad 0x0000000000000000 /* 0x20 unused */
- .quad 0x0000000000000000 /* 0x28 unused */
- .quad 0x0000000000000000 /* 0x33 TLS entry 1 */
- .quad 0x0000000000000000 /* 0x3b TLS entry 2 */
- .quad 0x0000000000000000 /* 0x43 TLS entry 3 */
- .quad 0x0000000000000000 /* 0x4b reserved */
- .quad 0x0000000000000000 /* 0x53 reserved */
- .quad 0x0000000000000000 /* 0x5b reserved */
-
- .quad 0x00cf9a000000ffff /* 0x60 kernel 4GB code at 0x00000000 */
- .quad 0x00cf92000000ffff /* 0x68 kernel 4GB data at 0x00000000 */
- .quad 0x00cffa000000ffff /* 0x73 user 4GB code at 0x00000000 */
- .quad 0x00cff2000000ffff /* 0x7b user 4GB data at 0x00000000 */
-
- .quad 0x0000000000000000 /* 0x80 TSS descriptor */
- .quad 0x0000000000000000 /* 0x88 LDT descriptor */
-
- /*
- * Segments used for calling PnP BIOS have byte granularity.
- * They code segments and data segments have fixed 64k limits,
- * the transfer segment sizes are set at run time.
- */
- .quad 0x00409a000000ffff /* 0x90 32-bit code */
- .quad 0x00009a000000ffff /* 0x98 16-bit code */
- .quad 0x000092000000ffff /* 0xa0 16-bit data */
- .quad 0x0000920000000000 /* 0xa8 16-bit data */
- .quad 0x0000920000000000 /* 0xb0 16-bit data */
-
- /*
- * The APM segments have byte granularity and their bases
- * are set at run time. All have 64k limits.
- */
- .quad 0x00409a000000ffff /* 0xb8 APM CS code */
- .quad 0x00009a000000ffff /* 0xc0 APM CS 16 code (16 bit) */
- .quad 0x004092000000ffff /* 0xc8 APM DS data */
-
- .quad 0x00c0920000000000 /* 0xd0 - ESPFIX SS */
- .quad 0x00cf92000000ffff /* 0xd8 - PDA */
- .quad 0x0000000000000000 /* 0xe0 - unused */
- .quad 0x0000000000000000 /* 0xe8 - unused */
- .quad 0x0000000000000000 /* 0xf0 - unused */
- .quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */
-