aboutsummaryrefslogtreecommitdiff
path: root/arch/i386/pci/mmconfig-shared.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/pci/mmconfig-shared.c')
-rw-r--r--arch/i386/pci/mmconfig-shared.c86
1 files changed, 86 insertions, 0 deletions
diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c
new file mode 100644
index 00000000000..998e04f6d68
--- /dev/null
+++ b/arch/i386/pci/mmconfig-shared.c
@@ -0,0 +1,86 @@
+/*
+ * mmconfig-shared.c - Low-level direct PCI config space access via
+ * MMCONFIG - common code between i386 and x86-64.
+ *
+ * This code does:
+ * - ACPI decoding and validation
+ *
+ * Per-architecture code takes care of the mappings and accesses
+ * themselves.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <asm/e820.h>
+
+#include "pci.h"
+
+/* aperture is up to 256MB but BIOS may reserve less */
+#define MMCONFIG_APER_MIN (2 * 1024*1024)
+#define MMCONFIG_APER_MAX (256 * 1024*1024)
+
+/* Verify the first 16 busses. We assume that systems with more busses
+ get MCFG right. */
+#define PCI_MMCFG_MAX_CHECK_BUS 16
+
+DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
+
+/* K8 systems have some devices (typically in the builtin northbridge)
+ that are only accessible using type1
+ Normally this can be expressed in the MCFG by not listing them
+ and assigning suitable _SEGs, but this isn't implemented in some BIOS.
+ Instead try to discover all devices on bus 0 that are unreachable using MM
+ and fallback for them. */
+static __init void unreachable_devices(void)
+{
+ int i, k;
+ /* Use the max bus number from ACPI here? */
+ for (k = 0; k < PCI_MMCFG_MAX_CHECK_BUS; k++) {
+ for (i = 0; i < 32; i++) {
+ u32 val1, val2;
+
+ pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
+ if (val1 == 0xffffffff)
+ continue;
+
+ raw_pci_ops->read(0, k, PCI_DEVFN(i, 0), 0, 4, &val2);
+ if (val1 != val2) {
+ set_bit(i + 32*k, pci_mmcfg_fallback_slots);
+ printk(KERN_NOTICE "PCI: No mmconfig possible"
+ " on device %02x:%02x\n", k, i);
+ }
+ }
+ }
+}
+
+void __init pci_mmcfg_init(int type)
+{
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+ return;
+
+ acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+
+ if ((pci_mmcfg_config_num == 0) ||
+ (pci_mmcfg_config == NULL) ||
+ (pci_mmcfg_config[0].address == 0))
+ return;
+
+ /* Only do this check when type 1 works. If it doesn't work
+ assume we run on a Mac and always use MCFG */
+ if (type == 1 &&
+ !e820_all_mapped(pci_mmcfg_config[0].address,
+ pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
+ E820_RESERVED)) {
+ printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not E820-reserved\n",
+ pci_mmcfg_config[0].address);
+ printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+ return;
+ }
+
+ if (pci_mmcfg_arch_init()) {
+ unreachable_devices();
+ pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
+ }
+}