diff options
Diffstat (limited to 'arch/i386')
| -rw-r--r-- | arch/i386/Kconfig | 41 | ||||
| -rw-r--r-- | arch/i386/boot/compressed/.gitignore | 1 | ||||
| -rw-r--r-- | arch/i386/boot/compressed/head.S | 2 | ||||
| -rw-r--r-- | arch/i386/defconfig | 2 | ||||
| -rw-r--r-- | arch/i386/kernel/acpi/boot.c | 2 | ||||
| -rw-r--r-- | arch/i386/kernel/cpu/common.c | 2 | ||||
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 10 | ||||
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/longhaul.c | 120 | ||||
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 6 | ||||
| -rw-r--r-- | arch/i386/kernel/smpboot.c | 4 | ||||
| -rw-r--r-- | arch/i386/kernel/trampoline.S | 5 |
11 files changed, 115 insertions, 80 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 0d67a0a1151..0dfee812811 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -777,6 +777,47 @@ config CRASH_DUMP PHYSICAL_START. For more details see Documentation/kdump/kdump.txt +config PHYSICAL_START + hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) + default "0x100000" + help + This gives the physical address where the kernel is loaded. + + If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then + bzImage will decompress itself to above physical address and + run from there. Otherwise, bzImage will run from the address where + it has been loaded by the boot loader and will ignore above physical + address. + + In normal kdump cases one does not have to set/change this option + as now bzImage can be compiled as a completely relocatable image + (CONFIG_RELOCATABLE=y) and be used to load and run from a different + address. This option is mainly useful for the folks who don't want + to use a bzImage for capturing the crash dump and want to use a + vmlinux instead. vmlinux is not relocatable hence a kernel needs + to be specifically compiled to run from a specific memory area + (normally a reserved region) and this option comes handy. + + So if you are using bzImage for capturing the crash dump, leave + the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y. + Otherwise if you plan to use vmlinux for capturing the crash dump + change this value to start of the reserved region (Typically 16MB + 0x1000000). In other words, it can be set based on the "X" value as + specified in the "crashkernel=YM@XM" command line boot parameter + passed to the panic-ed kernel. Typically this parameter is set as + crashkernel=64M@16M. Please take a look at + Documentation/kdump/kdump.txt for more details about crash dumps. + + Usage of bzImage for capturing the crash dump is recommended as + one does not have to build two kernels. Same kernel can be used + as production kernel and capture kernel. Above option should have + gone away after relocatable bzImage support is introduced. But it + is present because there are users out there who continue to use + vmlinux for dump capture. This option should go away down the + line. + + Don't change this unless you know what you are doing. + config RELOCATABLE bool "Build a relocatable kernel(EXPERIMENTAL)" depends on EXPERIMENTAL diff --git a/arch/i386/boot/compressed/.gitignore b/arch/i386/boot/compressed/.gitignore new file mode 100644 index 00000000000..be0ed065249 --- /dev/null +++ b/arch/i386/boot/compressed/.gitignore @@ -0,0 +1 @@ +relocs diff --git a/arch/i386/boot/compressed/head.S b/arch/i386/boot/compressed/head.S index f395a4bb38b..3517a32aaf4 100644 --- a/arch/i386/boot/compressed/head.S +++ b/arch/i386/boot/compressed/head.S @@ -28,7 +28,7 @@ #include <asm/page.h> #include <asm/boot.h> -.section ".text.head" +.section ".text.head","ax",@progbits .globl startup_32 startup_32: diff --git a/arch/i386/defconfig b/arch/i386/defconfig index e075ff05c46..88b7c1cf65a 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1167,7 +1167,7 @@ CONFIG_USB_STORAGE=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HID_POWERBOOK is not set +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 094300b3a81..cbcb2c27f48 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -333,7 +333,7 @@ acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end) /* * Parse Interrupt Source Override for the ACPI SCI */ -static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 1b34c56f812..8689d62abd4 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -54,7 +54,7 @@ static struct cpu_dev __cpuinitdata default_cpu = { .c_init = default_init, .c_vendor = "Unknown", }; -static struct cpu_dev * this_cpu = &default_cpu; +static struct cpu_dev * this_cpu __cpuinitdata = &default_cpu; static int __init cachesize_setup(char *str) { diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index b735458c6e3..10baa3501ed 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -373,8 +373,8 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, cpumask_t online_policy_cpus; struct drv_cmd cmd; unsigned int msr; - unsigned int next_state = 0; - unsigned int next_perf_state = 0; + unsigned int next_state = 0; /* Index into freq_table */ + unsigned int next_perf_state = 0; /* Index into perf table */ unsigned int i; int result = 0; @@ -420,6 +420,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, msr = (u32) perf->states[next_perf_state]. control & INTEL_MSR_RANGE; + cmd.val = get_cur_val(online_policy_cpus); cmd.val = (cmd.val & ~INTEL_MSR_RANGE) | msr; break; case SYSTEM_IO_CAPABLE: @@ -439,8 +440,8 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, else cpu_set(policy->cpu, cmd.mask); - freqs.old = data->freq_table[perf->state].frequency; - freqs.new = data->freq_table[next_perf_state].frequency; + freqs.old = perf->states[perf->state].core_frequency * 1000; + freqs.new = data->freq_table[next_state].frequency; for_each_cpu_mask(i, cmd.mask) { freqs.cpu = i; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); @@ -677,6 +678,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) valid_states++; } data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; + perf->state = 0; result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); if (result) diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 6d9c97a690f..e940e00b96c 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -52,6 +52,10 @@ #define CPU_EZRA_T 4 #define CPU_NEHEMIAH 5 +/* Flags */ +#define USE_ACPI_C3 (1 << 1) +#define USE_NORTHBRIDGE (1 << 2) + static int cpu_model; static unsigned int numscales=16; static unsigned int fsb; @@ -68,7 +72,7 @@ static unsigned int minmult, maxmult; static int can_scale_voltage; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; -static int port22_en; +static u8 longhaul_flags; /* Module parameters */ static int scale_voltage; @@ -80,7 +84,6 @@ static int ignore_latency; /* Clock ratios multiplied by 10 */ static int clock_ratio[32]; static int eblcr_table[32]; -static unsigned int highest_speed, lowest_speed; /* kHz */ static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; @@ -178,7 +181,7 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) safe_halt(); /* Change frequency on next halt or sleep */ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (port22_en) { + if (!cx_address) { ACPI_FLUSH_CPU_CACHE(); /* Invoke C1 */ halt(); @@ -189,7 +192,6 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) /* Dummy op - must do something useless after P_LVL3 read */ t = inl(acpi_fadt.xpm_tmr_blk.address); } - /* Disable bus ratio bit */ local_irq_disable(); longhaul.bits.RevisionKey = longhaul.bits.RevisionID; @@ -243,15 +245,14 @@ static void longhaul_setstate(unsigned int clock_ratio_index) outb(0xFF,0xA1); /* Overkill */ outb(0xFE,0x21); /* TMR0 only */ - if (pr->flags.bm_control) { + if (longhaul_flags & USE_NORTHBRIDGE) { + /* Disable AGP and PCI arbiters */ + outb(3, 0x22); + } else if ((pr != NULL) && pr->flags.bm_control) { /* Disable bus master arbitration */ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1, ACPI_MTX_DO_NOT_LOCK); - } else if (port22_en) { - /* Disable AGP and PCI arbiters */ - outb(3, 0x22); } - switch (longhaul_version) { /* @@ -278,22 +279,25 @@ static void longhaul_setstate(unsigned int clock_ratio_index) * to work in practice. */ case TYPE_POWERSAVER: - /* Don't allow wakeup */ - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0, - ACPI_MTX_DO_NOT_LOCK); - do_powersaver(cx->address, clock_ratio_index); + if (longhaul_flags & USE_ACPI_C3) { + /* Don't allow wakeup */ + acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0, + ACPI_MTX_DO_NOT_LOCK); + do_powersaver(cx->address, clock_ratio_index); + } else { + do_powersaver(0, clock_ratio_index); + } break; } - if (pr->flags.bm_control) { + if (longhaul_flags & USE_NORTHBRIDGE) { + /* Enable arbiters */ + outb(0, 0x22); + } else if ((pr != NULL) && pr->flags.bm_control) { /* Enable bus master arbitration */ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK); - } else if (port22_en) { - /* Enable arbiters */ - outb(0, 0x22); } - outb(pic2_mask,0xA1); /* restore mask */ outb(pic1_mask,0x21); @@ -314,12 +318,12 @@ static void longhaul_setstate(unsigned int clock_ratio_index) #define ROUNDING 0xf -static int _guess(int guess) +static int _guess(int guess, int mult) { int target; - target = ((maxmult/10)*guess); - if (maxmult%10 != 0) + target = ((mult/10)*guess); + if (mult%10 != 0) target += (guess/2); target += ROUNDING/2; target &= ~ROUNDING; @@ -327,17 +331,17 @@ static int _guess(int guess) } -static int guess_fsb(void) +static int guess_fsb(int mult) { int speed = (cpu_khz/1000); int i; - int speeds[3] = { 66, 100, 133 }; + int speeds[] = { 66, 100, 133, 200 }; speed += ROUNDING/2; speed &= ~ROUNDING; - for (i=0; i<3; i++) { - if (_guess(speeds[i]) == speed) + for (i=0; i<4; i++) { + if (_guess(speeds[i], mult) == speed) return speeds[i]; } return 0; @@ -354,9 +358,7 @@ static int __init longhaul_get_ranges(void) 130, 150, 160, 140, -1, 155, -1, 145 }; unsigned int j, k = 0; union msr_longhaul longhaul; - unsigned long lo, hi; - unsigned int eblcr_fsb_table_v1[] = { 66, 133, 100, -1 }; - unsigned int eblcr_fsb_table_v2[] = { 133, 100, -1, 66 }; + int mult = 0; switch (longhaul_version) { case TYPE_LONGHAUL_V1: @@ -364,30 +366,18 @@ static int __init longhaul_get_ranges(void) /* Ugh, Longhaul v1 didn't have the min/max MSRs. Assume min=3.0x & max = whatever we booted at. */ minmult = 30; - maxmult = longhaul_get_cpu_mult(); - rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi); - invalue = (lo & (1<<18|1<<19)) >>18; - if (cpu_model==CPU_SAMUEL || cpu_model==CPU_SAMUEL2) - fsb = eblcr_fsb_table_v1[invalue]; - else - fsb = guess_fsb(); + maxmult = mult = longhaul_get_cpu_mult(); break; case TYPE_POWERSAVER: /* Ezra-T */ if (cpu_model==CPU_EZRA_T) { + minmult = 30; rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); invalue = longhaul.bits.MaxMHzBR; if (longhaul.bits.MaxMHzBR4) invalue += 16; - maxmult=ezra_t_multipliers[invalue]; - - invalue = longhaul.bits.MinMHzBR; - if (longhaul.bits.MinMHzBR4 == 1) - minmult = 30; - else - minmult = ezra_t_multipliers[invalue]; - fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB]; + maxmult = mult = ezra_t_multipliers[invalue]; break; } @@ -407,21 +397,16 @@ static int __init longhaul_get_ranges(void) * But it works, so we don't grumble. */ minmult=40; - maxmult=longhaul_get_cpu_mult(); - - /* Starting with the 1.2GHz parts, theres a 200MHz bus. */ - if ((cpu_khz/maxmult) > 13400) - fsb = 200; - else - fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB]; + maxmult = mult = longhaul_get_cpu_mult(); break; } } + fsb = guess_fsb(mult); dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", minmult/10, minmult%10, maxmult/10, maxmult%10); - if (fsb == -1) { + if (fsb == 0) { printk (KERN_INFO PFX "Invalid (reserved) FSB!\n"); return -EINVAL; } @@ -691,27 +676,32 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) /* Find ACPI data for processor */ acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, &longhaul_walk_callback, NULL, (void *)&pr); - if (pr == NULL) - goto err_acpi; - if (longhaul_version == TYPE_POWERSAVER) { - /* Check ACPI support for C3 state */ + /* Check ACPI support for C3 state */ + if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) { cx = &pr->power.states[ACPI_STATE_C3]; if (cx->address > 0 && (cx->latency <= 1000 || ignore_latency != 0) ) { + longhaul_flags |= USE_ACPI_C3; goto print_support_type; } } + /* Check if northbridge is friendly */ + if (enable_arbiter_disable()) { + longhaul_flags |= USE_NORTHBRIDGE; + goto print_support_type; + } + + /* No ACPI C3 or we can't use it */ /* Check ACPI support for bus master arbiter disable */ - if (!pr->flags.bm_control) { - if (enable_arbiter_disable()) { - port22_en = 1; - } else { - goto err_acpi; - } + if ((pr == NULL) || !(pr->flags.bm_control)) { + printk(KERN_ERR PFX + "No ACPI support. Unsupported northbridge.\n"); + return -ENODEV; } + print_support_type: - if (!port22_en) { + if (!(longhaul_flags & USE_NORTHBRIDGE)) { printk (KERN_INFO PFX "Using ACPI support.\n"); } else { printk (KERN_INFO PFX "Using northbridge support.\n"); @@ -736,10 +726,6 @@ print_support_type: cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu); return 0; - -err_acpi: - printk(KERN_ERR PFX "No ACPI support. Unsupported northbridge. Aborting.\n"); - return -ENODEV; } static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) @@ -774,8 +760,8 @@ static int __init longhaul_init(void) #ifdef CONFIG_SMP if (num_online_cpus() > 1) { - return -ENODEV; printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n"); + return -ENODEV; } #endif #ifdef CONFIG_X86_IO_APIC diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 5113e923163..f43b987f952 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -533,9 +533,9 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); - printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI" - "config is deprecated.\n " - "Use X86_ACPI_CPUFREQ (acpi-cpufreq instead.\n" ); + printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI " + "config is deprecated.\n " + "Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.\n" ); return 0; diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index aef39be8136..300d9b38d02 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -227,7 +227,7 @@ static struct { atomic_t count_start; atomic_t count_stop; unsigned long long values[NR_CPUS]; -} tsc __initdata = { +} tsc __cpuinitdata = { .start_flag = ATOMIC_INIT(0), .count_start = ATOMIC_INIT(0), .count_stop = ATOMIC_INIT(0), @@ -332,7 +332,7 @@ static void __init synchronize_tsc_bp(void) printk("passed.\n"); } -static void __init synchronize_tsc_ap(void) +static void __cpuinit synchronize_tsc_ap(void) { int i; diff --git a/arch/i386/kernel/trampoline.S b/arch/i386/kernel/trampoline.S index fcce0e61b0e..2f1814c5cfd 100644 --- a/arch/i386/kernel/trampoline.S +++ b/arch/i386/kernel/trampoline.S @@ -38,6 +38,11 @@ .data +/* We can free up trampoline after bootup if cpu hotplug is not supported. */ +#ifndef CONFIG_HOTPLUG_CPU +.section ".init.data","aw",@progbits +#endif + .code16 ENTRY(trampoline_data) |