aboutsummaryrefslogtreecommitdiff
path: root/arch/ia64
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ia64')
-rw-r--r--arch/ia64/kernel/ptrace.c522
1 files changed, 200 insertions, 322 deletions
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 4c104170ca4..2a9943b5947 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -745,25 +745,6 @@ ia64_sync_fph (struct task_struct *task)
psr->dfh = 1;
}
-static int
-access_fr (struct unw_frame_info *info, int regnum, int hi,
- unsigned long *data, int write_access)
-{
- struct ia64_fpreg fpval;
- int ret;
-
- ret = unw_get_fr(info, regnum, &fpval);
- if (ret < 0)
- return ret;
-
- if (write_access) {
- fpval.u.bits[hi] = *data;
- ret = unw_set_fr(info, regnum, fpval);
- } else
- *data = fpval.u.bits[hi];
- return ret;
-}
-
/*
* Change the machine-state of CHILD such that it will return via the normal
* kernel exit-path, rather than the syscall-exit path.
@@ -865,309 +846,7 @@ access_nat_bits (struct task_struct *child, struct pt_regs *pt,
static int
access_uarea (struct task_struct *child, unsigned long addr,
- unsigned long *data, int write_access)
-{
- unsigned long *ptr, regnum, urbs_end, cfm;
- struct switch_stack *sw;
- struct pt_regs *pt;
-# define pt_reg_addr(pt, reg) ((void *) \
- ((unsigned long) (pt) \
- + offsetof(struct pt_regs, reg)))
-
-
- pt = task_pt_regs(child);
- sw = (struct switch_stack *) (child->thread.ksp + 16);
-
- if ((addr & 0x7) != 0) {
- dprintk("ptrace: unaligned register address 0x%lx\n", addr);
- return -1;
- }
-
- if (addr < PT_F127 + 16) {
- /* accessing fph */
- if (write_access)
- ia64_sync_fph(child);
- else
- ia64_flush_fph(child);
- ptr = (unsigned long *)
- ((unsigned long) &child->thread.fph + addr);
- } else if ((addr >= PT_F10) && (addr < PT_F11 + 16)) {
- /* scratch registers untouched by kernel (saved in pt_regs) */
- ptr = pt_reg_addr(pt, f10) + (addr - PT_F10);
- } else if (addr >= PT_F12 && addr < PT_F15 + 16) {
- /*
- * Scratch registers untouched by kernel (saved in
- * switch_stack).
- */
- ptr = (unsigned long *) ((long) sw
- + (addr - PT_NAT_BITS - 32));
- } else if (addr < PT_AR_LC + 8) {
- /* preserved state: */
- struct unw_frame_info info;
- char nat = 0;
- int ret;
-
- unw_init_from_blocked_task(&info, child);
- if (unw_unwind_to_user(&info) < 0)
- return -1;
-
- switch (addr) {
- case PT_NAT_BITS:
- return access_nat_bits(child, pt, &info,
- data, write_access);
-
- case PT_R4: case PT_R5: case PT_R6: case PT_R7:
- if (write_access) {
- /* read NaT bit first: */
- unsigned long dummy;
-
- ret = unw_get_gr(&info, (addr - PT_R4)/8 + 4,
- &dummy, &nat);
- if (ret < 0)
- return ret;
- }
- return unw_access_gr(&info, (addr - PT_R4)/8 + 4, data,
- &nat, write_access);
-
- case PT_B1: case PT_B2: case PT_B3:
- case PT_B4: case PT_B5:
- return unw_access_br(&info, (addr - PT_B1)/8 + 1, data,
- write_access);
-
- case PT_AR_EC:
- return unw_access_ar(&info, UNW_AR_EC, data,
- write_access);
-
- case PT_AR_LC:
- return unw_access_ar(&info, UNW_AR_LC, data,
- write_access);
-
- default:
- if (addr >= PT_F2 && addr < PT_F5 + 16)
- return access_fr(&info, (addr - PT_F2)/16 + 2,
- (addr & 8) != 0, data,
- write_access);
- else if (addr >= PT_F16 && addr < PT_F31 + 16)
- return access_fr(&info,
- (addr - PT_F16)/16 + 16,
- (addr & 8) != 0,
- data, write_access);
- else {
- dprintk("ptrace: rejecting access to register "
- "address 0x%lx\n", addr);
- return -1;
- }
- }
- } else if (addr < PT_F9+16) {
- /* scratch state */
- switch (addr) {
- case PT_AR_BSP:
- /*
- * By convention, we use PT_AR_BSP to refer to
- * the end of the user-level backing store.
- * Use ia64_rse_skip_regs(PT_AR_BSP, -CFM.sof)
- * to get the real value of ar.bsp at the time
- * the kernel was entered.
- *
- * Furthermore, when changing the contents of
- * PT_AR_BSP (or PT_CFM) while the task is
- * blocked in a system call, convert the state
- * so that the non-system-call exit
- * path is used. This ensures that the proper
- * state will be picked up when resuming
- * execution. However, it *also* means that
- * once we write PT_AR_BSP/PT_CFM, it won't be
- * possible to modify the syscall arguments of
- * the pending system call any longer. This
- * shouldn't be an issue because modifying
- * PT_AR_BSP/PT_CFM generally implies that
- * we're either abandoning the pending system
- * call or that we defer it's re-execution
- * (e.g., due to GDB doing an inferior
- * function call).
- */
- urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
- if (write_access) {
- if (*data != urbs_end) {
- if (in_syscall(pt))
- convert_to_non_syscall(child,
- pt,
- cfm);
- /*
- * Simulate user-level write
- * of ar.bsp:
- */
- pt->loadrs = 0;
- pt->ar_bspstore = *data;
- }
- } else
- *data = urbs_end;
- return 0;
-
- case PT_CFM:
- urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
- if (write_access) {
- if (((cfm ^ *data) & PFM_MASK) != 0) {
- if (in_syscall(pt))
- convert_to_non_syscall(child,
- pt,
- cfm);
- pt->cr_ifs = ((pt->cr_ifs & ~PFM_MASK)
- | (*data & PFM_MASK));
- }
- } else
- *data = cfm;
- return 0;
-
- case PT_CR_IPSR:
- if (write_access) {
- unsigned long tmp = *data;
- /* psr.ri==3 is a reserved value: SDM 2:25 */
- if ((tmp & IA64_PSR_RI) == IA64_PSR_RI)
- tmp &= ~IA64_PSR_RI;
- pt->cr_ipsr = ((tmp & IPSR_MASK)
- | (pt->cr_ipsr & ~IPSR_MASK));
- } else
- *data = (pt->cr_ipsr & IPSR_MASK);
- return 0;
-
- case PT_AR_RSC:
- if (write_access)
- pt->ar_rsc = *data | (3 << 2); /* force PL3 */
- else
- *data = pt->ar_rsc;
- return 0;
-
- case PT_AR_RNAT:
- ptr = pt_reg_addr(pt, ar_rnat);
- break;
- case PT_R1:
- ptr = pt_reg_addr(pt, r1);
- break;
- case PT_R2: case PT_R3:
- ptr = pt_reg_addr(pt, r2) + (addr - PT_R2);
- break;
- case PT_R8: case PT_R9: case PT_R10: case PT_R11:
- ptr = pt_reg_addr(pt, r8) + (addr - PT_R8);
- break;
- case PT_R12: case PT_R13:
- ptr = pt_reg_addr(pt, r12) + (addr - PT_R12);
- break;
- case PT_R14:
- ptr = pt_reg_addr(pt, r14);
- break;
- case PT_R15:
- ptr = pt_reg_addr(pt, r15);
- break;
- case PT_R16: case PT_R17: case PT_R18: case PT_R19:
- case PT_R20: case PT_R21: case PT_R22: case PT_R23:
- case PT_R24: case PT_R25: case PT_R26: case PT_R27:
- case PT_R28: case PT_R29: case PT_R30: case PT_R31:
- ptr = pt_reg_addr(pt, r16) + (addr - PT_R16);
- break;
- case PT_B0:
- ptr = pt_reg_addr(pt, b0);
- break;
- case PT_B6:
- ptr = pt_reg_addr(pt, b6);
- break;
- case PT_B7:
- ptr = pt_reg_addr(pt, b7);
- break;
- case PT_F6: case PT_F6+8: case PT_F7: case PT_F7+8:
- case PT_F8: case PT_F8+8: case PT_F9: case PT_F9+8:
- ptr = pt_reg_addr(pt, f6) + (addr - PT_F6);
- break;
- case PT_AR_BSPSTORE:
- ptr = pt_reg_addr(pt, ar_bspstore);
- break;
- case PT_AR_UNAT:
- ptr = pt_reg_addr(pt, ar_unat);
- break;
- case PT_AR_PFS:
- ptr = pt_reg_addr(pt, ar_pfs);
- break;
- case PT_AR_CCV:
- ptr = pt_reg_addr(pt, ar_ccv);
- break;
- case PT_AR_FPSR:
- ptr = pt_reg_addr(pt, ar_fpsr);
- break;
- case PT_CR_IIP:
- ptr = pt_reg_addr(pt, cr_iip);
- break;
- case PT_PR:
- ptr = pt_reg_addr(pt, pr);
- break;
- /* scratch register */
-
- default:
- /* disallow accessing anything else... */
- dprintk("ptrace: rejecting access to register "
- "address 0x%lx\n", addr);
- return -1;
- }
- } else if (addr <= PT_AR_SSD) {
- ptr = pt_reg_addr(pt, ar_csd) + (addr - PT_AR_CSD);
- } else {
- /* access debug registers */
-
- if (addr >= PT_IBR) {
- regnum = (addr - PT_IBR) >> 3;
- ptr = &child->thread.ibr[0];
- } else {
- regnum = (addr - PT_DBR) >> 3;
- ptr = &child->thread.dbr[0];
- }
-
- if (regnum >= 8) {
- dprintk("ptrace: rejecting access to register "
- "address 0x%lx\n", addr);
- return -1;
- }
-#ifdef CONFIG_PERFMON
- /*
- * Check if debug registers are used by perfmon. This
- * test must be done once we know that we can do the
- * operation, i.e. the arguments are all valid, but
- * before we start modifying the state.
- *
- * Perfmon needs to keep a count of how many processes
- * are trying to modify the debug registers for system
- * wide monitoring sessions.
- *
- * We also include read access here, because they may
- * cause the PMU-installed debug register state
- * (dbr[], ibr[]) to be reset. The two arrays are also
- * used by perfmon, but we do not use
- * IA64_THREAD_DBG_VALID. The registers are restored
- * by the PMU context switch code.
- */
- if (pfm_use_debug_registers(child)) return -1;
-#endif
-
- if (!(child->thread.flags & IA64_THREAD_DBG_VALID)) {
- child->thread.flags |= IA64_THREAD_DBG_VALID;
- memset(child->thread.dbr, 0,
- sizeof(child->thread.dbr));
- memset(child->thread.ibr, 0,
- sizeof(child->thread.ibr));
- }
-
- ptr += regnum;
-
- if ((regnum & 1) && write_access) {
- /* don't let the user set kernel-level breakpoints: */
- *ptr = *data & ~(7UL << 56);
- return 0;
- }
- }
- if (write_access)
- *ptr = *data;
- else
- *data = *ptr;
- return 0;
-}
+ unsigned long *data, int write_access);
static long
ptrace_getregs (struct task_struct *child, struct pt_all_user_regs __user *ppr)
@@ -2290,6 +1969,205 @@ static int fpregs_set(struct task_struct *target,
kbuf, ubuf);
}
+static int
+access_uarea(struct task_struct *child, unsigned long addr,
+ unsigned long *data, int write_access)
+{
+ unsigned int pos = -1; /* an invalid value */
+ int ret;
+ unsigned long *ptr, regnum;
+
+ if ((addr & 0x7) != 0) {
+ dprintk("ptrace: unaligned register address 0x%lx\n", addr);
+ return -1;
+ }
+ if ((addr >= PT_NAT_BITS + 8 && addr < PT_F2) ||
+ (addr >= PT_R7 + 8 && addr < PT_B1) ||
+ (addr >= PT_AR_LC + 8 && addr < PT_CR_IPSR) ||
+ (addr >= PT_AR_SSD + 8 && addr < PT_DBR)) {
+ dprintk("ptrace: rejecting access to register "
+ "address 0x%lx\n", addr);
+ return -1;
+ }
+
+ switch (addr) {
+ case PT_F32 ... (PT_F127 + 15):
+ pos = addr - PT_F32 + ELF_FP_OFFSET(32);
+ break;
+ case PT_F2 ... (PT_F5 + 15):
+ pos = addr - PT_F2 + ELF_FP_OFFSET(2);
+ break;
+ case PT_F10 ... (PT_F31 + 15):
+ pos = addr - PT_F10 + ELF_FP_OFFSET(10);
+ break;
+ case PT_F6 ... (PT_F9 + 15):
+ pos = addr - PT_F6 + ELF_FP_OFFSET(6);
+ break;
+ }
+
+ if (pos != -1) {
+ if (write_access)
+ ret = fpregs_set(child, NULL, pos,
+ sizeof(unsigned long), data, NULL);
+ else
+ ret = fpregs_get(child, NULL, pos,
+ sizeof(unsigned long), data, NULL);
+ if (ret != 0)
+ return -1;
+ return 0;
+ }
+
+ switch (addr) {
+ case PT_NAT_BITS:
+ pos = ELF_NAT_OFFSET;
+ break;
+ case PT_R4 ... PT_R7:
+ pos = addr - PT_R4 + ELF_GR_OFFSET(4);
+ break;
+ case PT_B1 ... PT_B5:
+ pos = addr - PT_B1 + ELF_BR_OFFSET(1);
+ break;
+ case PT_AR_EC:
+ pos = ELF_AR_EC_OFFSET;
+ break;
+ case PT_AR_LC:
+ pos = ELF_AR_LC_OFFSET;
+ break;
+ case PT_CR_IPSR:
+ pos = ELF_CR_IPSR_OFFSET;
+ break;
+ case PT_CR_IIP:
+ pos = ELF_CR_IIP_OFFSET;
+ break;
+ case PT_CFM:
+ pos = ELF_CFM_OFFSET;
+ break;
+ case PT_AR_UNAT:
+ pos = ELF_AR_UNAT_OFFSET;
+ break;
+ case PT_AR_PFS:
+ pos = ELF_AR_PFS_OFFSET;
+ break;
+ case PT_AR_RSC:
+ pos = ELF_AR_RSC_OFFSET;
+ break;
+ case PT_AR_RNAT:
+ pos = ELF_AR_RNAT_OFFSET;
+ break;
+ case PT_AR_BSPSTORE:
+ pos = ELF_AR_BSPSTORE_OFFSET;
+ break;
+ case PT_PR:
+ pos = ELF_PR_OFFSET;
+ break;
+ case PT_B6:
+ pos = ELF_BR_OFFSET(6);
+ break;
+ case PT_AR_BSP:
+ pos = ELF_AR_BSP_OFFSET;
+ break;
+ case PT_R1 ... PT_R3:
+ pos = addr - PT_R1 + ELF_GR_OFFSET(1);
+ break;
+ case PT_R12 ... PT_R15:
+ pos = addr - PT_R12 + ELF_GR_OFFSET(12);
+ break;
+ case PT_R8 ... PT_R11:
+ pos = addr - PT_R8 + ELF_GR_OFFSET(8);
+ break;
+ case PT_R16 ... PT_R31:
+ pos = addr - PT_R16 + ELF_GR_OFFSET(16);
+ break;
+ case PT_AR_CCV:
+ pos = ELF_AR_CCV_OFFSET;
+ break;
+ case PT_AR_FPSR:
+ pos = ELF_AR_FPSR_OFFSET;
+ break;
+ case PT_B0:
+ pos = ELF_BR_OFFSET(0);
+ break;
+ case PT_B7:
+ pos = ELF_BR_OFFSET(7);
+ break;
+ case PT_AR_CSD:
+ pos = ELF_AR_CSD_OFFSET;
+ break;
+ case PT_AR_SSD:
+ pos = ELF_AR_SSD_OFFSET;
+ break;
+ }
+
+ if (pos != -1) {
+ if (write_access)
+ ret = gpregs_set(child, NULL, pos,
+ sizeof(unsigned long), data, NULL);
+ else
+ ret = gpregs_get(child, NULL, pos,
+ sizeof(unsigned long), data, NULL);
+ if (ret != 0)
+ return -1;
+ return 0;
+ }
+
+ /* access debug registers */
+ if (addr >= PT_IBR) {
+ regnum = (addr - PT_IBR) >> 3;
+ ptr = &child->thread.ibr[0];
+ } else {
+ regnum = (addr - PT_DBR) >> 3;
+ ptr = &child->thread.dbr[0];
+ }
+
+ if (regnum >= 8) {
+ dprintk("ptrace: rejecting access to register "
+ "address 0x%lx\n", addr);
+ return -1;
+ }
+#ifdef CONFIG_PERFMON
+ /*
+ * Check if debug registers are used by perfmon. This
+ * test must be done once we know that we can do the
+ * operation, i.e. the arguments are all valid, but
+ * before we start modifying the state.
+ *
+ * Perfmon needs to keep a count of how many processes
+ * are trying to modify the debug registers for system
+ * wide monitoring sessions.
+ *
+ * We also include read access here, because they may
+ * cause the PMU-installed debug register state
+ * (dbr[], ibr[]) to be reset. The two arrays are also
+ * used by perfmon, but we do not use
+ * IA64_THREAD_DBG_VALID. The registers are restored
+ * by the PMU context switch code.
+ */
+ if (pfm_use_debug_registers(child))
+ return -1;
+#endif
+
+ if (!(child->thread.flags & IA64_THREAD_DBG_VALID)) {
+ child->thread.flags |= IA64_THREAD_DBG_VALID;
+ memset(child->thread.dbr, 0,
+ sizeof(child->thread.dbr));
+ memset(child->thread.ibr, 0,
+ sizeof(child->thread.ibr));
+ }
+
+ ptr += regnum;
+
+ if ((regnum & 1) && write_access) {
+ /* don't let the user set kernel-level breakpoints: */
+ *ptr = *data & ~(7UL << 56);
+ return 0;
+ }
+ if (write_access)
+ *ptr = *data;
+ else
+ *data = *ptr;
+ return 0;
+}
+
static const struct user_regset native_regsets[] = {
{
.core_note_type = NT_PRSTATUS,
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 01:21:10 +0000