diff options
Diffstat (limited to 'arch/m32r')
30 files changed, 1961 insertions, 660 deletions
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 0d90ea58a0c..64c133344af 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -78,6 +78,9 @@ config PLAT_OAKS32R config PLAT_MAPPI2 bool "Mappi-II(M3A-ZA36/M3A-ZA52)" +config PLAT_MAPPI3 + bool "Mappi-III(M3A-2170)" + endchoice choice @@ -134,6 +137,7 @@ config BUS_CLOCK int "Bus Clock [Hz] (integer)" default "70000000" if PLAT_MAPPI default "25000000" if PLAT_USRV + default "50000000" if PLAT_MAPPI3 default "50000000" if PLAT_M32700UT default "50000000" if PLAT_OPSPUT default "33333333" if PLAT_OAKS32R @@ -149,7 +153,7 @@ config CPU_LITTLE_ENDIAN config MEMORY_START hex "Physical memory start address (hex)" - default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 + default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3 default "08000000" if PLAT_USRV default "08000000" if PLAT_M32700UT default "08000000" if PLAT_OPSPUT @@ -157,6 +161,7 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size (hex)" + default "08000000" if PLAT_MAPPI3 default "04000000" if PLAT_MAPPI || PLAT_MAPPI2 default "02000000" if PLAT_USRV default "01000000" if PLAT_M32700UT diff --git a/arch/m32r/boot/compressed/m32r_sio.c b/arch/m32r/boot/compressed/m32r_sio.c index bad5475eff9..8f9a57271f8 100644 --- a/arch/m32r/boot/compressed/m32r_sio.c +++ b/arch/m32r/boot/compressed/m32r_sio.c @@ -6,6 +6,7 @@ */ #include <linux/config.h> +#include <asm/processor.h> static void putc(char c); @@ -38,16 +39,17 @@ static int puts(const char *s) static void putc(char c) { - - while ((*BOOT_SIO0STS & 0x3) != 0x3) ; + while ((*BOOT_SIO0STS & 0x3) != 0x3) + cpu_relax(); if (c == '\n') { *BOOT_SIO0TXB = '\r'; - while ((*BOOT_SIO0STS & 0x3) != 0x3) ; + while ((*BOOT_SIO0STS & 0x3) != 0x3) + cpu_relax(); } *BOOT_SIO0TXB = c; } -#else /* defined(CONFIG_PLAT_M32700UT_Alpha) || defined(CONFIG_PLAT_M32700UT) */ -#ifdef CONFIG_MMU +#else /* !(CONFIG_PLAT_M32700UT_Alpha) && !(CONFIG_PLAT_M32700UT) */ +#if defined(CONFIG_PLAT_MAPPI2) #define SIO0STS (volatile unsigned short *)(0xa0efd000 + 14) #define SIO0TXB (volatile unsigned short *)(0xa0efd000 + 30) #else @@ -57,11 +59,12 @@ static void putc(char c) static void putc(char c) { - - while ((*SIO0STS & 0x1) == 0) ; + while ((*SIO0STS & 0x1) == 0) + cpu_relax(); if (c == '\n') { *SIO0TXB = '\r'; - while ((*SIO0STS & 0x1) == 0) ; + while ((*SIO0STS & 0x1) == 0) + cpu_relax(); } *SIO0TXB = c; } diff --git a/arch/m32r/defconfig b/arch/m32r/defconfig index 417c95ba87e..85309309316 100644 --- a/arch/m32r/defconfig +++ b/arch/m32r/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:10:44 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:20:11 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +69,7 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -268,7 +273,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -393,18 +397,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -414,6 +406,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -465,6 +468,10 @@ CONFIG_DS1302=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -508,8 +515,14 @@ CONFIG_VIDEO_M32R_AR_M64278=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -543,10 +556,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -719,8 +728,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index cfd690bf6d8..6c6b6c37663 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -10,6 +10,7 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_PLAT_MAPPI) += setup_mappi.o io_mappi.o obj-$(CONFIG_PLAT_MAPPI2) += setup_mappi2.o io_mappi2.o +obj-$(CONFIG_PLAT_MAPPI3) += setup_mappi3.o io_mappi3.o obj-$(CONFIG_PLAT_USRV) += setup_usrv.o io_usrv.o obj-$(CONFIG_PLAT_M32700UT) += setup_m32700ut.o io_m32700ut.o obj-$(CONFIG_PLAT_OPSPUT) += setup_opsput.o io_opsput.o @@ -17,4 +18,3 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_PLAT_OAKS32R) += setup_oaks32r.o io_oaks32r.o EXTRA_AFLAGS := -traditional - diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/kernel/io_m32700ut.c index 371ba904e96..e545b065f7e 100644 --- a/arch/m32r/kernel/io_m32700ut.c +++ b/arch/m32r/kernel/io_m32700ut.c @@ -3,8 +3,8 @@ * * Typical I/O routines for M32700UT board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -172,64 +172,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -287,52 +244,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/kernel/io_mappi.c index 85688ffb52f..78033165fb5 100644 --- a/arch/m32r/kernel/io_mappi.c +++ b/arch/m32r/kernel/io_mappi.c @@ -3,8 +3,8 @@ * * Typical I/O routines for Mappi board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto */ #include <linux/config.h> @@ -130,57 +130,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread(0, port, &b, sizeof(b), 1, 0); - return b; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned char b; - pcc_ioread(1, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread(0, port, &w, sizeof(w), 1, 0); - return w; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned short w; - pcc_ioread(1, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -229,41 +193,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &b, sizeof(b), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &w, sizeof(w), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/kernel/io_mappi2.c index 4182cd4f97c..5c03504bf65 100644 --- a/arch/m32r/kernel/io_mappi2.c +++ b/arch/m32r/kernel/io_mappi2.c @@ -3,7 +3,7 @@ * * Typical I/O routines for Mappi2 board. * - * Copyright (c) 2001-2003 Hiroyuki Kondo, Hirokazu Takata, + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, * Hitoshi Yamamoto, Mamoru Sakugawa */ @@ -25,7 +25,7 @@ extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_MAPPI2_CFC */ +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ #define PORT2ADDR(port) _port2addr(port) #define PORT2ADDR_NE(port) _port2addr_ne(port) @@ -169,64 +169,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_USB) - if (port >= 0x340 && port < 0x3a0) - v = *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -284,52 +241,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if (port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c new file mode 100644 index 00000000000..c80bde65785 --- /dev/null +++ b/arch/m32r/kernel/io_mappi3.c @@ -0,0 +1,378 @@ +/* + * linux/arch/m32r/kernel/io_mappi3.c + * + * Typical I/O routines for Mappi3 board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <linux/config.h> +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) +#define PORT2ADDR_NE(port) _port2addr_ne(port) +#define PORT2ADDR_USB(port) _port2addr_usb(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET); +} + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + case 0x1f0: return (void *)0xb4002000; + case 0x1f1: return (void *)0xb4012800; + case 0x1f2: return (void *)0xb4012002; + case 0x1f3: return (void *)0xb4012802; + case 0x1f4: return (void *)0xb4012004; + case 0x1f5: return (void *)0xb4012804; + case 0x1f6: return (void *)0xb4012006; + case 0x1f7: return (void *)0xb4012806; + case 0x3f6: return (void *)0xb401200e; + default: return (void *)&dummy_reg; + } +} +#endif + +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x10000000); +} + +static inline void *_port2addr_usb(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x12000000); +} +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +static inline unsigned char _ne_inb(void *portp) +{ + return (unsigned char) *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void * addr, unsigned long count) +{ + unsigned char *buf = addr; + + while (count--) + *buf++ = *(volatile unsigned char *)portp; +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = (unsigned char)b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned char *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned short *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_USB) + else if (port >= 0x340 && port < 0x3a0) + return *(volatile unsigned short *)PORT2ADDR_USB(port); +#endif + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned char *)__port2addr_ata(port) = b; + } else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned short *)__port2addr_ata(port) = w; + } else +#endif +#if defined(CONFIG_USB) + if (port >= 0x340 && port < 0x3a0) + *(volatile unsigned short *)PORT2ADDR_USB(port) = w; + else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void * addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + unsigned char *buf = addr; + unsigned char *portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } +#endif + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void * addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void * addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/kernel/io_oaks32r.c index 286964794d5..9997dddd24d 100644 --- a/arch/m32r/kernel/io_oaks32r.c +++ b/arch/m32r/kernel/io_oaks32r.c @@ -3,7 +3,7 @@ * * Typical I/O routines for OAKS32R board. * - * Copyright (c) 2001-2004 Hiroyuki Kondo, Hirokazu Takata, + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, * Hitoshi Yamamoto, Mamoru Sakugawa */ @@ -90,35 +90,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inb(PORT2ADDR_NE(port)); - else - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inw(PORT2ADDR_NE(port)); - else - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -146,27 +132,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outb(b, PORT2ADDR_NE(port)); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outw(w, PORT2ADDR_NE(port)); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/kernel/io_opsput.c index aaf42f9f76d..e34951e8156 100644 --- a/arch/m32r/kernel/io_opsput.c +++ b/arch/m32r/kernel/io_opsput.c @@ -1,10 +1,10 @@ /* - * linux/arch/m32r/kernel/io_mappi.c + * linux/arch/m32r/kernel/io_opsput.c * * Typical I/O routines for OPSPUT board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -98,7 +98,6 @@ unsigned char _inb(unsigned long port) { if (port >= LAN_IOSTART && port < LAN_IOEND) return _ne_inb(PORT2ADDR_NE(port)); - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { unsigned char b; @@ -118,7 +117,6 @@ unsigned short _inw(unsigned long port) else if(port >= 0x340 && port < 0x3a0) return *(volatile unsigned short *)PORT2ADDR_USB(port); #endif - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { unsigned short w; @@ -143,55 +141,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -219,7 +183,6 @@ void _outw(unsigned short w, unsigned long port) *(volatile unsigned short *)PORT2ADDR_USB(port) = w; else #endif - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); @@ -240,43 +203,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/kernel/io_usrv.c index 27928a0b99e..9eb161dcc10 100644 --- a/arch/m32r/kernel/io_usrv.c +++ b/arch/m32r/kernel/io_usrv.c @@ -3,8 +3,8 @@ * * Typical I/O routines for uServer board. * - * Copyright (c) 2001 - 2003 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -39,7 +39,7 @@ extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); #define PORT2ADDR(port) _port2addr(port) -static __inline__ void *_port2addr(unsigned long port) +static inline void *_port2addr(unsigned long port) { #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) if (port >= UART0_IOSTART && port <= UART0_IOEND) @@ -50,7 +50,7 @@ static __inline__ void *_port2addr(unsigned long port) return (void *)(port + NONCACHE_OFFSET); } -static __inline__ void delay(void) +static inline void delay(void) { __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); } @@ -87,39 +87,22 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char b; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else { - b = *(volatile unsigned char *)PORT2ADDR(port); - delay(); - return b; - } + unsigned char v = _inb(port); + delay(); + return v; } unsigned short _inw_p(unsigned long port) { - unsigned short w; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else { - w = *(volatile unsigned short *)PORT2ADDR(port); - delay(); - return w; - } + unsigned short v = _inw(port); + delay(); + return v; } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); - return v; } @@ -149,25 +132,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c index 4826cd6e40e..ec5674727e7 100644 --- a/arch/m32r/kernel/setup.c +++ b/arch/m32r/kernel/setup.c @@ -330,6 +330,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "Machine\t\t: Mappi Evaluation board\n"); #elif CONFIG_PLAT_MAPPI2 seq_printf(m, "Machine\t\t: Mappi-II Evaluation board\n"); +#elif CONFIG_PLAT_MAPPI3 + seq_printf(m, "Machine\t\t: Mappi-III Evaluation board\n"); #elif CONFIG_PLAT_M32700UT seq_printf(m, "Machine\t\t: M32700UT Evaluation board\n"); #elif CONFIG_PLAT_OPSPUT diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/kernel/setup_m32700ut.c index 488aa87bab7..b014e2c1e52 100644 --- a/arch/m32r/kernel/setup_m32700ut.c +++ b/arch/m32r/kernel/setup_m32700ut.c @@ -78,13 +78,13 @@ static void shutdown_m32700ut_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_irq_type = { - "M32700UT-IRQ", - startup_m32700ut_irq, - shutdown_m32700ut_irq, - enable_m32700ut_irq, - disable_m32700ut_irq, - mask_and_ack_m32700ut, - end_m32700ut_irq + .typename = "M32700UT-IRQ", + .startup = startup_m32700ut_irq, + .shutdown = shutdown_m32700ut_irq, + .enable = enable_m32700ut_irq, + .disable = disable_m32700ut_irq, + .ack = mask_and_ack_m32700ut, + .end = end_m32700ut_irq }; /* @@ -155,13 +155,13 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_pld_irq_type = { - "M32700UT-PLD-IRQ", - startup_m32700ut_pld_irq, - shutdown_m32700ut_pld_irq, - enable_m32700ut_pld_irq, - disable_m32700ut_pld_irq, - mask_and_ack_m32700ut_pld, - end_m32700ut_pld_irq + .typename = "M32700UT-PLD-IRQ", + .startup = startup_m32700ut_pld_irq, + .shutdown = shutdown_m32700ut_pld_irq, + .enable = enable_m32700ut_pld_irq, + .disable = disable_m32700ut_pld_irq, + .ack = mask_and_ack_m32700ut_pld, + .end = end_m32700ut_pld_irq }; /* @@ -224,13 +224,13 @@ static void shutdown_m32700ut_lanpld_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_lanpld_irq_type = { - "M32700UT-PLD-LAN-IRQ", - startup_m32700ut_lanpld_irq, - shutdown_m32700ut_lanpld_irq, - enable_m32700ut_lanpld_irq, - disable_m32700ut_lanpld_irq, - mask_and_ack_m32700ut_lanpld, - end_m32700ut_lanpld_irq + .typename = "M32700UT-PLD-LAN-IRQ", + .startup = startup_m32700ut_lanpld_irq, + .shutdown = shutdown_m32700ut_lanpld_irq, + .enable = enable_m32700ut_lanpld_irq, + .disable = disable_m32700ut_lanpld_irq, + .ack = mask_and_ack_m32700ut_lanpld, + .end = end_m32700ut_lanpld_irq }; /* @@ -293,13 +293,13 @@ static void shutdown_m32700ut_lcdpld_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_lcdpld_irq_type = { - "M32700UT-PLD-LCD-IRQ", - startup_m32700ut_lcdpld_irq, - shutdown_m32700ut_lcdpld_irq, - enable_m32700ut_lcdpld_irq, - disable_m32700ut_lcdpld_irq, - mask_and_ack_m32700ut_lcdpld, - end_m32700ut_lcdpld_irq + .typename = "M32700UT-PLD-LCD-IRQ", + .startup = startup_m32700ut_lcdpld_irq, + .shutdown = shutdown_m32700ut_lcdpld_irq, + .enable = enable_m32700ut_lcdpld_irq, + .disable = disable_m32700ut_lcdpld_irq, + .ack = mask_and_ack_m32700ut_lcdpld, + .end = end_m32700ut_lcdpld_irq }; void __init init_IRQ(void) diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/kernel/setup_mappi.c index 1e74110f067..aaf8e569b93 100644 --- a/arch/m32r/kernel/setup_mappi.c +++ b/arch/m32r/kernel/setup_mappi.c @@ -70,13 +70,13 @@ static void shutdown_mappi_irq(unsigned int irq) static struct hw_interrupt_type mappi_irq_type = { - "MAPPI-IRQ", - startup_mappi_irq, - shutdown_mappi_irq, - enable_mappi_irq, - disable_mappi_irq, - mask_and_ack_mappi, - end_mappi_irq + .typename = "MAPPI-IRQ", + .startup = startup_mappi_irq, + .shutdown = shutdown_mappi_irq, + .enable = enable_mappi_irq, + .disable = disable_mappi_irq, + .ack = mask_and_ack_mappi, + .end = end_mappi_irq }; void __init init_IRQ(void) diff --git a/arch/m32r/kernel/setup_mappi2.c b/arch/m32r/kernel/setup_mappi2.c index 1904d465a50..38d5e9a4142 100644 --- a/arch/m32r/kernel/setup_mappi2.c +++ b/arch/m32r/kernel/setup_mappi2.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_mappi.c + * linux/arch/m32r/kernel/setup_mappi2.c * * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board * @@ -79,13 +79,13 @@ static void shutdown_mappi2_irq(unsigned int irq) static struct hw_interrupt_type mappi2_irq_type = { - "MAPPI2-IRQ", - startup_mappi2_irq, - shutdown_mappi2_irq, - enable_mappi2_irq, - disable_mappi2_irq, - mask_and_ack_mappi2, - end_mappi2_irq + .typename = "MAPPI2-IRQ", + .startup = startup_mappi2_irq, + .shutdown = shutdown_mappi2_irq, + .enable = enable_mappi2_irq, + .disable = disable_mappi2_irq, + .ack = mask_and_ack_mappi2, + .end = end_mappi2_irq }; void __init init_IRQ(void) @@ -156,7 +156,6 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFIREQ].handler = &mappi2_irq_type; irq_desc[PLD_IRQ_CFIREQ].action = 0; irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ -// icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; disable_mappi2_irq(PLD_IRQ_CFIREQ); @@ -167,7 +166,6 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFC_INSERT].action = 0; irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; -// icu_data[PLD_IRQ_CFC_INSERT].icucr = 0; disable_mappi2_irq(PLD_IRQ_CFC_INSERT); /* ICUCR42: CFC Eject */ @@ -176,9 +174,7 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFC_EJECT].action = 0; irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; -// icu_data[PLD_IRQ_CFC_EJECT].icucr = 0; disable_mappi2_irq(PLD_IRQ_CFC_EJECT); - #endif /* CONFIG_MAPPI2_CFC */ } diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/kernel/setup_mappi3.c new file mode 100644 index 00000000000..3d60a85aaec --- /dev/null +++ b/arch/m32r/kernel/setup_mappi3.c @@ -0,0 +1,208 @@ +/* + * linux/arch/m32r/kernel/setup_mappi3.c + * + * Setup routines for Renesas MAPPI-III(M3A-2170) Board + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <linux/config.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/system.h> +#include <asm/m32r.h> +#include <asm/io.h> + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +#ifndef CONFIG_SMP +typedef struct { + unsigned long icucr; /* ICU Control Register */ +} icu_data_t; +#endif /* CONFIG_SMP */ + +icu_data_t icu_data[NR_IRQS]; + +static void disable_mappi3_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_mappi3_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_and_ack_mappi3(unsigned int irq) +{ + disable_mappi3_irq(irq); +} + +static void end_mappi3_irq(unsigned int irq) +{ + enable_mappi3_irq(irq); +} + +static unsigned int startup_mappi3_irq(unsigned int irq) +{ + enable_mappi3_irq(irq); + return (0); +} + +static void shutdown_mappi3_irq(unsigned int irq) +{ + unsigned long port; + + port = irq2port(irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct hw_interrupt_type mappi3_irq_type = +{ + .typename = "MAPPI3-IRQ", + .startup = startup_mappi3_irq, + .shutdown = shutdown_mappi3_irq, + .enable = enable_mappi3_irq, + .disable = disable_mappi3_irq, + .ack = mask_and_ack_mappi3, + .end = end_mappi3_irq +}; + +void __init init_IRQ(void) +{ +#if defined(CONFIG_SMC91X) + /* INT0 : LAN controller (SMC91111) */ + irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_INT0].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_INT0].action = 0; + irq_desc[M32R_IRQ_INT0].depth = 1; + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(M32R_IRQ_INT0); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_MFT2].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_MFT2].action = 0; + irq_desc[M32R_IRQ_MFT2].depth = 1; + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_mappi3_irq(M32R_IRQ_MFT2); + +#ifdef CONFIG_SERIAL_M32R_SIO + /* SIO0_R : uart receive data */ + irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO0_R].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO0_R].action = 0; + irq_desc[M32R_IRQ_SIO0_R].depth = 1; + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO0_S].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO0_S].action = 0; + irq_desc[M32R_IRQ_SIO0_S].depth = 1; + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO0_S); + /* SIO1_R : uart receive data */ + irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO1_R].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO1_R].action = 0; + irq_desc[M32R_IRQ_SIO1_R].depth = 1; + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO1_R); + + /* SIO1_S : uart send data */ + irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO1_S].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO1_S].action = 0; + irq_desc[M32R_IRQ_SIO1_S].depth = 1; + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO1_S); +#endif /* CONFIG_M32R_USE_DBG_CONSOLE */ + +#if defined(CONFIG_USB) + /* INT1 : USB Host controller interrupt */ + irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_INT1].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_INT1].action = 0; + irq_desc[M32R_IRQ_INT1].depth = 1; + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; + disable_mappi3_irq(M32R_IRQ_INT1); +#endif /* CONFIG_USB */ + + /* ICUCR40: CFC IREQ */ + irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFIREQ].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFIREQ].action = 0; + irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; + disable_mappi3_irq(PLD_IRQ_CFIREQ); + +#if defined(CONFIG_M32R_CFC) + /* ICUCR41: CFC Insert */ + irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFC_INSERT].action = 0; + irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; + disable_mappi3_irq(PLD_IRQ_CFC_INSERT); + + /* ICUCR42: CFC Eject */ + irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFC_EJECT].action = 0; + irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(PLD_IRQ_CFC_EJECT); +#endif /* CONFIG_M32R_CFC */ +} + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = M32R_IRQ_INT0, + .end = M32R_IRQ_INT0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init platform_init(void) +{ + platform_device_register(&smc91x_device); + return 0; +} +arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_oaks32r.c b/arch/m32r/kernel/setup_oaks32r.c index b04834526c9..d656640badc 100644 --- a/arch/m32r/kernel/setup_oaks32r.c +++ b/arch/m32r/kernel/setup_oaks32r.c @@ -70,13 +70,13 @@ static void shutdown_oaks32r_irq(unsigned int irq) static struct hw_interrupt_type oaks32r_irq_type = { - "OAKS32R-IRQ", - startup_oaks32r_irq, - shutdown_oaks32r_irq, - enable_oaks32r_irq, - disable_oaks32r_irq, - mask_and_ack_mappi, - end_oaks32r_irq + .typename = "OAKS32R-IRQ", + .startup = startup_oaks32r_irq, + .shutdown = shutdown_oaks32r_irq, + .enable = enable_oaks32r_irq, + .disable = disable_oaks32r_irq, + .ack = mask_and_ack_mappi, + .end = end_oaks32r_irq }; void __init init_IRQ(void) diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/kernel/setup_opsput.c index 84315e344c5..86f4cf2a86c 100644 --- a/arch/m32r/kernel/setup_opsput.c +++ b/arch/m32r/kernel/setup_opsput.c @@ -79,13 +79,13 @@ static void shutdown_opsput_irq(unsigned int irq) static struct hw_interrupt_type opsput_irq_type = { - "OPSPUT-IRQ", - startup_opsput_irq, - shutdown_opsput_irq, - enable_opsput_irq, - disable_opsput_irq, - mask_and_ack_opsput, - end_opsput_irq + .typename = "OPSPUT-IRQ", + .startup = startup_opsput_irq, + .shutdown = shutdown_opsput_irq, + .enable = enable_opsput_irq, + .disable = disable_opsput_irq, + .ack = mask_and_ack_opsput, + .end = end_opsput_irq }; /* @@ -156,13 +156,13 @@ static void shutdown_opsput_pld_irq(unsigned int irq) static struct hw_interrupt_type opsput_pld_irq_type = { - "OPSPUT-PLD-IRQ", - startup_opsput_pld_irq, - shutdown_opsput_pld_irq, - enable_opsput_pld_irq, - disable_opsput_pld_irq, - mask_and_ack_opsput_pld, - end_opsput_pld_irq + .typename = "OPSPUT-PLD-IRQ", + .startup = startup_opsput_pld_irq, + .shutdown = shutdown_opsput_pld_irq, + .enable = enable_opsput_pld_irq, + .disable = disable_opsput_pld_irq, + .ack = mask_and_ack_opsput_pld, + .end = end_opsput_pld_irq }; /* diff --git a/arch/m32r/kernel/setup_usrv.c b/arch/m32r/kernel/setup_usrv.c index fe417be5e3e..634741bf9d3 100644 --- a/arch/m32r/kernel/setup_usrv.c +++ b/arch/m32r/kernel/setup_usrv.c @@ -70,13 +70,13 @@ static void shutdown_mappi_irq(unsigned int irq) static struct hw_interrupt_type mappi_irq_type = { - "M32700-IRQ", - startup_mappi_irq, - shutdown_mappi_irq, - enable_mappi_irq, - disable_mappi_irq, - mask_and_ack_mappi, - end_mappi_irq + .typename = "M32700-IRQ", + .startup = startup_mappi_irq, + .shutdown = shutdown_mappi_irq, + .enable = enable_mappi_irq, + .disable = disable_mappi_irq, + .ack = mask_and_ack_mappi, + .end = end_mappi_irq }; /* @@ -143,13 +143,13 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq) static struct hw_interrupt_type m32700ut_pld_irq_type = { - "USRV-PLD-IRQ", - startup_m32700ut_pld_irq, - shutdown_m32700ut_pld_irq, - enable_m32700ut_pld_irq, - disable_m32700ut_pld_irq, - mask_and_ack_m32700ut_pld, - end_m32700ut_pld_irq + .typename = "USRV-PLD-IRQ", + .startup = startup_m32700ut_pld_irq, + .shutdown = shutdown_m32700ut_pld_irq, + .enable = enable_m32700ut_pld_irq, + .disable = disable_m32700ut_pld_irq, + .ack = mask_and_ack_m32700ut_pld, + .end = end_m32700ut_pld_irq }; void __init init_IRQ(void) diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.smp b/arch/m32r/m32700ut/defconfig.m32700ut.smp index 1c002181df7..3e607d90b5f 100644 --- a/arch/m32r/m32700ut/defconfig.m32700ut.smp +++ b/arch/m32r/m32700ut/defconfig.m32700ut.smp @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:10:50 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:20:58 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -15,6 +15,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -27,13 +28,16 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=15 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +# CONFIG_CPUSETS is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -43,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +70,7 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -271,7 +277,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -396,18 +401,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -417,6 +410,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -468,6 +472,10 @@ CONFIG_DS1302=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -511,8 +519,14 @@ CONFIG_VIDEO_M32R_AR_M64278=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -546,10 +560,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -722,8 +732,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.up b/arch/m32r/m32700ut/defconfig.m32700ut.up index 805357f7bda..2d3e7cda8f4 100644 --- a/arch/m32r/m32700ut/defconfig.m32700ut.up +++ b/arch/m32r/m32700ut/defconfig.m32700ut.up @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:10:54 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:21:34 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +69,7 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -268,7 +273,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -393,18 +397,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -414,6 +406,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -465,6 +468,10 @@ CONFIG_DS1302=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -508,8 +515,14 @@ CONFIG_VIDEO_M32R_AR_M64278=y # Graphics support # CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -543,10 +556,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -719,8 +728,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi/defconfig.nommu b/arch/m32r/mappi/defconfig.nommu index 714aa6e7034..a8425fba340 100644 --- a/arch/m32r/mappi/defconfig.nommu +++ b/arch/m32r/mappi/defconfig.nommu @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:10:57 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:21:46 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,13 +27,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -41,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -62,6 +66,7 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -202,7 +207,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -325,18 +329,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -346,6 +338,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -394,6 +397,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -434,10 +441,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -595,8 +598,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi/defconfig.smp b/arch/m32r/mappi/defconfig.smp index 956a8e2f98d..1a7f3cd4224 100644 --- a/arch/m32r/mappi/defconfig.smp +++ b/arch/m32r/mappi/defconfig.smp @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:02 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:21:52 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -17,6 +17,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,16 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=15 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -66,6 +71,7 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -139,8 +145,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -294,7 +300,6 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -420,18 +425,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -441,6 +434,17 @@ CONFIG_SERIO=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -489,6 +493,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -529,10 +537,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -708,8 +712,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi/defconfig.up b/arch/m32r/mappi/defconfig.up index c9253e94efb..38910fb7669 100644 --- a/arch/m32r/mappi/defconfig.up +++ b/arch/m32r/mappi/defconfig.up @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:07 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:21:59 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -17,6 +17,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,15 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +69,7 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -135,8 +140,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -290,7 +295,6 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -416,18 +420,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -437,6 +429,17 @@ CONFIG_SERIO=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -485,6 +488,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -525,10 +532,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -704,8 +707,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi2/defconfig.vdec2 b/arch/m32r/mappi2/defconfig.vdec2 index c14791d2730..56f287b6589 100644 --- a/arch/m32r/mappi2/defconfig.vdec2 +++ b/arch/m32r/mappi2/defconfig.vdec2 @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:10 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:22:02 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -28,13 +29,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +47,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,6 +69,7 @@ CONFIG_KMOD=y # CONFIG_PLAT_OPSPUT is not set # CONFIG_PLAT_OAKS32R is not set CONFIG_PLAT_MAPPI2=y +# CONFIG_PLAT_MAPPI3 is not set # CONFIG_CHIP_M32700 is not set # CONFIG_CHIP_M32102 is not set CONFIG_CHIP_VDEC2=y @@ -264,7 +269,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -389,18 +393,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -410,6 +402,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # CONFIG_VT=y @@ -460,6 +463,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -521,10 +528,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -697,8 +700,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/mappi3/defconfig.smp b/arch/m32r/mappi3/defconfig.smp new file mode 100644 index 00000000000..2eebe75fc07 --- /dev/null +++ b/arch/m32r/mappi3/defconfig.smp @@ -0,0 +1,751 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc5 +# Tue May 31 17:55:34 2005 +# +CONFIG_M32R=y +# CONFIG_UID16 is not set +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Processor type and features +# +# CONFIG_PLAT_MAPPI is not set +# CONFIG_PLAT_USRV is not set +# CONFIG_PLAT_M32700UT is not set +# CONFIG_PLAT_OPSPUT is not set +# CONFIG_PLAT_OAKS32R is not set +# CONFIG_PLAT_MAPPI2 is not set +CONFIG_PLAT_MAPPI3=y +CONFIG_CHIP_M32700=y +# CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_VDEC2 is not set +# CONFIG_CHIP_OPSP is not set +CONFIG_MMU=y +CONFIG_TLB_ENTRIES=32 +CONFIG_ISA_M32R2=y +CONFIG_ISA_DSP_LEVEL2=y +CONFIG_ISA_DUAL_ISSUE=y +CONFIG_BUS_CLOCK=10000000 +CONFIG_TIMER_DIVIDE=128 +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_NOHIGHMEM=y +CONFIG_DISCONTIGMEM=y +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00080000 +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PREEMPT=y +# CONFIG_HAVE_DEC_LOCK is not set +CONFIG_SMP=y +# CONFIG_CHIP_M32700_TS1 is not set +CONFIG_NR_CPUS=2 +# CONFIG_NUMA is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ISA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y + +# +# PC-card bridges +# +# CONFIG_TCIC is not set +# CONFIG_M32R_PCC is not set +# CONFIG_M32R_CFC is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=m +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_NE2000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_M32R_SIO=y +CONFIG_SERIAL_M32R_SIO_CONSOLE=y +# CONFIG_SERIAL_M32R_PLDSIO is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS_FS=y +CONFIG_JFFS_FS_VERBOSE=0 +CONFIG_JFFS_PROC_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FRAME_POINTER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/m32r/mappi3/dot.gdbinit b/arch/m32r/mappi3/dot.gdbinit new file mode 100644 index 00000000000..89c22184e13 --- /dev/null +++ b/arch/m32r/mappi3/dot.gdbinit @@ -0,0 +1,224 @@ +# .gdbinit file +# $Id: dot.gdbinit,v 1.1 2005/04/11 02:21:08 sakugawa Exp $ + +# setting +set width 0d70 +set radix 0d16 +use_debug_dma + +# Initialize SDRAM controller for Mappi +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + set *(unsigned long *)0x00ef604c = 0x00000020 + # TR + set *(unsigned long *)0x00ef6028 = 0x00051502 + set *(unsigned long *)0x00ef6048 = 0x00051502 + # ADR + set *(unsigned long *)0x00ef6020 = 0x08000004 + set *(unsigned long *)0x00ef6040 = 0x0c000004 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010517 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 + set *(unsigned long *)0x00ef6044 = 0x00000001 +end + +# Initialize LAN controller for Mappi +define lanc_init + # Set BSEL4 + #set *(unsigned long *)0x00ef5004 = 0x0fff330f + #set *(unsigned long *)0x00ef5004 = 0x01113301 + +# set *(unsigned long *)0x00ef5004 = 0x02011101 +# set *(unsigned long *)0x00ef5004 = 0x04441104 +end + +define clock_init + set *(unsigned long *)0x00ef4010 = 2 + set *(unsigned long *)0x00ef4014 = 2 + set *(unsigned long *)0x00ef4020 = 3 + set *(unsigned long *)0x00ef4024 = 3 + set *(unsigned long *)0x00ef4004 = 0x7 +# shell sleep 0.1 +# set *(unsigned long *)0x00ef4004 = 0x5 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +define port_init + set $sfrbase = 0x00ef0000 + set *(unsigned short *)0x00ef1060 = 0x5555 + set *(unsigned short *)0x00ef1062 = 0x5555 + set *(unsigned short *)0x00ef1064 = 0x5555 + set *(unsigned short *)0x00ef1066 = 0x5555 + set *(unsigned short *)0x00ef1068 = 0x5555 + set *(unsigned short *)0x00ef106a = 0x0000 + set *(unsigned short *)0x00ef106e = 0x5555 + set *(unsigned short *)0x00ef1070 = 0x5555 +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + while ($i < 0d16 ) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb +end + +# Cache ON +define set_cache_type + set $mctype = (void*)0xfffffff8 +# chaos +# set *(unsigned long *)($mctype) = 0x0000c000 +# m32102 i-cache only + set *(unsigned long *)($mctype) = 0x00008000 +# m32102 d-cache only +# set *(unsigned long *)($mctype) = 0x00004000 +end +define cache_on + set $param = (void*)0x08001000 + set *(unsigned long *)($param) = 0x60ff6102 +end + + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set $task = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb + + set $mests = *(unsigned long *)0xffff000c + set $mdeva = *(unsigned long *)0xffff0010 + printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva +end + + +# Setup all +define setup + clock_init + shell sleep 0.1 + port_init + sdram_init +# lanc_init +# dispc_init +# set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +# load busybox.mot +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + + ## MOUNT_ROOT_RDONLY + set {long}($param+0x00)=0 + ## RAMDISK_FLAGS + #set {long}($param+0x04)=0 + ## ORIG_ROOT_DEV + #set {long}($param+0x08)=0x00000100 + ## LOADER_TYPE + #set {long}($param+0x0C)=0 + ## INITRD_START + set {long}($param+0x10)=0x082a0000 + ## INITRD_SIZE + set {long}($param+0x14)=0d6200000 + + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d100000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6_04 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0" + + +end + +# Boot +define boot + set_kernel_parameters + debug_chaos + set *(unsigned long *)0x00f00000=0x08002000 + set $pc=0x08002000 + set $fp=0 + del b + si +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot +end + +sdireset +sdireset +file vmlinux +target m32rsdi + +restart +boot diff --git a/arch/m32r/mm/extable.c b/arch/m32r/mm/extable.c index 9a97363b652..1743f23d49a 100644 --- a/arch/m32r/mm/extable.c +++ b/arch/m32r/mm/extable.c @@ -1,10 +1,8 @@ /* - * linux/arch/i386/mm/extable.c + * linux/arch/m32r/mm/extable.c */ -#include <linux/config.h> #include <linux/module.h> -#include <linux/spinlock.h> #include <asm/uaccess.h> int fixup_exception(struct pt_regs *regs) @@ -19,4 +17,3 @@ int fixup_exception(struct pt_regs *regs) return 0; } - diff --git a/arch/m32r/oaks32r/defconfig.nommu b/arch/m32r/oaks32r/defconfig.nommu index f2da9be726e..3f9fe519acb 100644 --- a/arch/m32r/oaks32r/defconfig.nommu +++ b/arch/m32r/oaks32r/defconfig.nommu @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:13 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:22:04 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -16,6 +16,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -26,12 +27,14 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -40,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -61,6 +65,7 @@ CONFIG_KMOD=y # CONFIG_PLAT_OPSPUT is not set CONFIG_PLAT_OAKS32R=y # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set # CONFIG_CHIP_M32700 is not set CONFIG_CHIP_M32102=y # CONFIG_CHIP_VDEC2 is not set @@ -92,10 +97,6 @@ CONFIG_PREEMPT=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # @@ -193,7 +194,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -311,18 +311,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -332,6 +320,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -375,6 +374,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -415,10 +418,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -574,8 +573,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FRAME_POINTER is not set diff --git a/arch/m32r/opsput/defconfig.opsput b/arch/m32r/opsput/defconfig.opsput index a87e1ea4c30..66adec6a701 100644 --- a/arch/m32r/opsput/defconfig.opsput +++ b/arch/m32r/opsput/defconfig.opsput @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Wed Feb 16 21:11:41 2005 +# Linux kernel version: 2.6.12-rc5 +# Fri Jun 3 16:22:06 2005 # CONFIG_M32R=y # CONFIG_UID16 is not set @@ -15,6 +15,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -27,13 +28,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -43,6 +46,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -64,6 +68,7 @@ CONFIG_KMOD=y CONFIG_PLAT_OPSPUT=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set # CONFIG_CHIP_M32700 is not set # CONFIG_CHIP_M32102 is not set # CONFIG_CHIP_VDEC2 is not set @@ -243,7 +248,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -368,18 +372,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -389,6 +381,17 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -438,6 +441,10 @@ CONFIG_DS1302=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -478,10 +485,6 @@ CONFIG_DS1302=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -654,8 +657,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set |