diff options
Diffstat (limited to 'arch/mips/au1000/common')
| -rw-r--r-- | arch/mips/au1000/common/cputable.c | 5 | ||||
| -rw-r--r-- | arch/mips/au1000/common/dbdma.c | 6 | ||||
| -rw-r--r-- | arch/mips/au1000/common/dbg_io.c | 6 | ||||
| -rw-r--r-- | arch/mips/au1000/common/dma.c | 5 | ||||
| -rw-r--r-- | arch/mips/au1000/common/gpio.c | 5 | ||||
| -rw-r--r-- | arch/mips/au1000/common/irq.c | 8 | ||||
| -rw-r--r-- | arch/mips/au1000/common/pci.c | 2 | ||||
| -rw-r--r-- | arch/mips/au1000/common/platform.c | 117 | ||||
| -rw-r--r-- | arch/mips/au1000/common/power.c | 11 | ||||
| -rw-r--r-- | arch/mips/au1000/common/prom.c | 2 | ||||
| -rw-r--r-- | arch/mips/au1000/common/puts.c | 1 | ||||
| -rw-r--r-- | arch/mips/au1000/common/reset.c | 8 | ||||
| -rw-r--r-- | arch/mips/au1000/common/setup.c | 11 | ||||
| -rw-r--r-- | arch/mips/au1000/common/sleeper.S | 2 | ||||
| -rw-r--r-- | arch/mips/au1000/common/time.c | 35 |
15 files changed, 78 insertions, 146 deletions
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c index 5c0d35d6e22..8c93a05d738 100644 --- a/arch/mips/au1000/common/cputable.c +++ b/arch/mips/au1000/common/cputable.c @@ -11,10 +11,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include <linux/string.h> -#include <linux/sched.h> -#include <linux/threads.h> -#include <linux/init.h> + #include <asm/mach-au1x00/au1000.h> struct cpu_spec* cur_cpu_spec[NR_CPUS]; diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index 57f17b41098..53377dfc064 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -31,18 +31,12 @@ */ #include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/sched.h> #include <linux/slab.h> #include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/delay.h> #include <linux/interrupt.h> #include <linux/module.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> -#include <asm/system.h> - #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c index 79e0b0a51ac..eae1bb2ca26 100644 --- a/arch/mips/au1000/common/dbg_io.c +++ b/arch/mips/au1000/common/dbg_io.c @@ -1,5 +1,4 @@ -#include <asm/io.h> #include <asm/mach-au1x00/au1000.h> #ifdef CONFIG_KGDB @@ -55,8 +54,7 @@ typedef unsigned int uint32; #define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff) #define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y)) -extern unsigned long get_au1x00_uart_baud_base(void); -extern unsigned long cal_r4koff(void); +extern unsigned long calc_clock(void); void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) { @@ -64,7 +62,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) if (UART16550_READ(UART_MOD_CNTRL) != 0x3) { UART16550_WRITE(UART_MOD_CNTRL, 3); } - cal_r4koff(); + calc_clock(); /* disable interrupts */ UART16550_WRITE(UART_IER, 0); diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c index c78260d4e83..95f69ea146e 100644 --- a/arch/mips/au1000/common/dma.c +++ b/arch/mips/au1000/common/dma.c @@ -33,12 +33,9 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/sched.h> #include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/delay.h> #include <linux/interrupt.h> -#include <asm/system.h> + #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000_dma.h> diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index 0b658f1db4c..52545258997 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -27,13 +27,8 @@ * others have a second one : GPIO2 */ -#include <linux/init.h> -#include <linux/io.h> -#include <linux/types.h> #include <linux/module.h> -#include <asm/addrspace.h> - #include <asm/mach-au1x00/au1000.h> #include <asm/gpio.h> diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index 3c7714f057a..f0626992fd7 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -1,7 +1,6 @@ /* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) * @@ -27,7 +26,6 @@ */ #include <linux/bitops.h> #include <linux/init.h> -#include <linux/io.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -591,7 +589,7 @@ void __init arch_init_irq(void) imp++; } - set_c0_status(ALLINTS); + set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); /* Board specific IRQ initialization. */ diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c index ce771487567..7e966b31e3e 100644 --- a/arch/mips/au1000/common/pci.c +++ b/arch/mips/au1000/common/pci.c @@ -30,7 +30,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/types.h> + #include <linux/pci.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 841904cdef4..31d2a227087 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -3,18 +3,65 @@ * * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> * + * (C) Copyright Embedded Alley Solutions, Inc 2005 + * Author: Pantelis Antoniou <pantelis@embeddedalley.com> + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/device.h> + #include <linux/platform_device.h> -#include <linux/kernel.h> +#include <linux/serial_8250.h> #include <linux/init.h> -#include <linux/resource.h> #include <asm/mach-au1x00/au1xxx.h> +#define PORT(_base, _irq) \ + { \ + .iobase = _base, \ + .membase = (void __iomem *)_base,\ + .mapbase = CPHYSADDR(_base), \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_AU, \ + .flags = UPF_SKIP_TEST \ + } + +static struct plat_serial8250_port au1x00_uart_data[] = { +#if defined(CONFIG_SERIAL_8250_AU1X00) +#if defined(CONFIG_SOC_AU1000) + PORT(UART0_ADDR, AU1000_UART0_INT), + PORT(UART1_ADDR, AU1000_UART1_INT), + PORT(UART2_ADDR, AU1000_UART2_INT), + PORT(UART3_ADDR, AU1000_UART3_INT), +#elif defined(CONFIG_SOC_AU1500) + PORT(UART0_ADDR, AU1500_UART0_INT), + PORT(UART3_ADDR, AU1500_UART3_INT), +#elif defined(CONFIG_SOC_AU1100) + PORT(UART0_ADDR, AU1100_UART0_INT), + PORT(UART1_ADDR, AU1100_UART1_INT), + PORT(UART3_ADDR, AU1100_UART3_INT), +#elif defined(CONFIG_SOC_AU1550) + PORT(UART0_ADDR, AU1550_UART0_INT), + PORT(UART1_ADDR, AU1550_UART1_INT), + PORT(UART3_ADDR, AU1550_UART3_INT), +#elif defined(CONFIG_SOC_AU1200) + PORT(UART0_ADDR, AU1200_UART0_INT), + PORT(UART1_ADDR, AU1200_UART1_INT), +#endif +#endif /* CONFIG_SERIAL_8250_AU1X00 */ + { }, +}; + +static struct platform_device au1xx0_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_AU1X00, + .dev = { + .platform_data = au1x00_uart_data, + }, +}; + /* OHCI (USB full speed host controller) */ static struct resource au1xxx_usb_ohci_resources[] = { [0] = { @@ -186,19 +233,6 @@ static struct resource au1200_lcd_resources[] = { } }; -static struct resource au1200_ide0_resources[] = { - [0] = { - .start = AU1XXX_ATA_PHYS_ADDR, - .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1XXX_ATA_INT, - .end = AU1XXX_ATA_INT, - .flags = IORESOURCE_IRQ, - } -}; - static u64 au1200_lcd_dmamask = ~(u32)0; static struct platform_device au1200_lcd_device = { @@ -212,20 +246,6 @@ static struct platform_device au1200_lcd_device = { .resource = au1200_lcd_resources, }; - -static u64 ide0_dmamask = ~(u32)0; - -static struct platform_device au1200_ide0_device = { - .name = "au1200-ide", - .id = 0, - .dev = { - .dma_mask = &ide0_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(au1200_ide0_resources), - .resource = au1200_ide0_resources, -}; - static u64 au1xxx_mmc_dmamask = ~(u32)0; static struct platform_device au1xxx_mmc_device = { @@ -245,31 +265,6 @@ static struct platform_device au1x00_pcmcia_device = { .id = 0, }; -#ifdef CONFIG_MIPS_DB1200 - -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = AU1XXX_SMC91111_PHYS_ADDR, - .end = AU1XXX_SMC91111_PHYS_ADDR + 0xfffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1XXX_SMC91111_IRQ, - .end = AU1XXX_SMC91111_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -#endif - /* All Alchemy demoboards with I2C have this #define in their headers */ #ifdef SMBUS_PSC_BASE static struct resource pbdb_smbus_resources[] = { @@ -289,6 +284,7 @@ static struct platform_device pbdb_smbus_device = { #endif static struct platform_device *au1xxx_platform_devices[] __initdata = { + &au1xx0_uart_device, &au1xxx_usb_ohci_device, &au1x00_pcmcia_device, #ifdef CONFIG_FB_AU1100 @@ -299,12 +295,8 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_gdt_device, &au1xxx_usb_otg_device, &au1200_lcd_device, - &au1200_ide0_device, &au1xxx_mmc_device, #endif -#ifdef CONFIG_MIPS_DB1200 - &smc91x_device, -#endif #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, #endif @@ -312,6 +304,13 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { int __init au1xxx_platform_init(void) { + unsigned int uartclk = get_au1x00_uart_baud_base() * 16; + int i; + + /* Fill up uartclk. */ + for (i = 0; au1x00_uart_data[i].flags ; i++) + au1x00_uart_data[i].uartclk = uartclk; + return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices)); } diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c index 725a52f364b..a8cd2c1b9e1 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/au1000/common/power.c @@ -29,17 +29,14 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ + #include <linux/init.h> #include <linux/pm.h> #include <linux/pm_legacy.h> -#include <linux/slab.h> #include <linux/sysctl.h> #include <linux/jiffies.h> -#include <asm/string.h> #include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/system.h> #include <asm/cacheflush.h> #include <asm/mach-au1x00/au1000.h> @@ -47,17 +44,13 @@ #define DEBUG 1 #ifdef DEBUG -# define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args) +# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args) #else # define DPRINTK(fmt, args...) #endif static void au1000_calibrate_delay(void); -extern void set_au1x00_speed(unsigned int new_freq); -extern unsigned int get_au1x00_speed(void); -extern unsigned long get_au1x00_uart_baud_base(void); -extern void set_au1x00_uart_baud_base(unsigned long new_baud_base); extern unsigned long save_local_and_disable(int controller); extern void restore_local_and_enable(int controller, unsigned long mask); extern void local_enable_irq(unsigned int irq_nr); diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c index 90d70695aa6..f10af829e4e 100644 --- a/arch/mips/au1000/common/prom.c +++ b/arch/mips/au1000/common/prom.c @@ -33,8 +33,8 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ + #include <linux/module.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/string.h> diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c index 2705829cd46..e34c67e8929 100644 --- a/arch/mips/au1000/common/puts.c +++ b/arch/mips/au1000/common/puts.c @@ -28,7 +28,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/types.h> #include <asm/mach-au1x00/au1000.h> #define SERIAL_BASE UART_BASE diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c index b8638d293cf..60cec537c74 100644 --- a/arch/mips/au1000/common/reset.c +++ b/arch/mips/au1000/common/reset.c @@ -27,13 +27,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> + #include <asm/mach-au1x00/au1000.h> extern int au_sleep(void); diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 9e4ab80caab..0e86f7a6b4a 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -25,21 +25,14 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ + #include <linux/init.h> -#include <linux/sched.h> #include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/interrupt.h> #include <linux/module.h> #include <linux/pm.h> -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> #include <asm/mipsregs.h> #include <asm/reboot.h> -#include <asm/pgtable.h> #include <asm/time.h> #include <au1000.h> @@ -49,8 +42,6 @@ extern void __init board_setup(void); extern void au1000_restart(char *); extern void au1000_halt(void); extern void au1000_power_off(void); -extern void au1x_time_init(void); -extern void au1x_timer_setup(struct irqaction *irq); extern void set_cpuspec(void); void __init plat_mem_setup(void) diff --git a/arch/mips/au1000/common/sleeper.S b/arch/mips/au1000/common/sleeper.S index 683d9da84b6..4b3cf021a45 100644 --- a/arch/mips/au1000/common/sleeper.S +++ b/arch/mips/au1000/common/sleeper.S @@ -9,9 +9,9 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ + #include <asm/asm.h> #include <asm/mipsregs.h> -#include <asm/addrspace.h> #include <asm/regdef.h> #include <asm/stackframe.h> diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index e122bbc6cd8..bdb6d73b26f 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -1,6 +1,6 @@ /* * - * Copyright (C) 2001 MontaVista Software, ppopov@mvista.com + * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com> * Copied and modified Carsten Langgaard's time.c * * Carsten Langgaard, carstenl@mips.com @@ -34,23 +34,13 @@ #include <linux/types.h> #include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sched.h> #include <linux/spinlock.h> -#include <linux/hardirq.h> -#include <asm/compiler.h> #include <asm/mipsregs.h> #include <asm/time.h> -#include <asm/div64.h> #include <asm/mach-au1x00/au1000.h> -#include <linux/mc146818rtc.h> -#include <linux/timex.h> - -static unsigned long r4k_offset; /* Amount to increment compare reg each time */ -static unsigned long r4k_cur; /* What counter should be at next timer irq */ -int no_au1xxx_32khz; +static int no_au1xxx_32khz; extern int allow_au1k_wait; /* default off for CP0 Counter */ #ifdef CONFIG_PM @@ -184,7 +174,7 @@ wakeup_counter0_set(int ticks) * "wait" is enabled, and we need to detect if the 32KHz isn't present * but requested......got it? :-) -- Dan */ -unsigned long cal_r4koff(void) +unsigned long calc_clock(void) { unsigned long cpu_speed; unsigned long flags; @@ -229,19 +219,13 @@ unsigned long cal_r4koff(void) // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); spin_unlock_irqrestore(&time_lock, flags); - return (cpu_speed / HZ); + return cpu_speed; } void __init plat_time_init(void) { - unsigned int est_freq; - - printk("calculating r4koff... "); - r4k_offset = cal_r4koff(); - printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); + unsigned int est_freq = calc_clock(); - //est_freq = 2*r4k_offset*HZ; - est_freq = r4k_offset*HZ; est_freq += 5000; /* round */ est_freq -= est_freq%10000; printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, @@ -249,9 +233,6 @@ void __init plat_time_init(void) set_au1x00_speed(est_freq); set_au1x00_lcd_clock(); // program the LCD clock - r4k_cur = (read_c0_count() + r4k_offset); - write_c0_compare(r4k_cur); - #ifdef CONFIG_PM /* * setup counter 0, since it keeps ticking after a @@ -265,12 +246,8 @@ void __init plat_time_init(void) * Check to ensure we really have a 32KHz oscillator before * we do this. */ - if (no_au1xxx_32khz) { + if (no_au1xxx_32khz) printk("WARNING: no 32KHz clock found.\n"); - - /* Ensure we get CPO_COUNTER interrupts. */ - set_c0_status(IE_IRQ5); - } else { while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); au_writel(0, SYS_TOYWRITE); |