aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/cobalt/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/cobalt/setup.c')
-rw-r--r--arch/mips/cobalt/setup.c100
1 files changed, 71 insertions, 29 deletions
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index f8138c15a53..d358a118fa3 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -13,6 +13,8 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
@@ -21,6 +23,7 @@
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
+#include <asm/serial.h>
#include <asm/cobalt/cobalt.h>
@@ -30,45 +33,44 @@ extern void cobalt_machine_power_off(void);
int cobalt_board_id;
-static char my_cmdline[CL_SIZE] = {
- "console=ttyS0,115200 "
-#ifdef CONFIG_IP_PNP
- "ip=on "
-#endif
-#ifdef CONFIG_ROOT_NFS
- "root=/dev/nfs "
-#else
- "root=/dev/hda1 "
-#endif
- };
-
const char *get_system_type(void)
{
+ switch (cobalt_board_id) {
+ case COBALT_BRD_ID_QUBE1:
+ return "Cobalt Qube";
+ case COBALT_BRD_ID_RAQ1:
+ return "Cobalt RaQ";
+ case COBALT_BRD_ID_QUBE2:
+ return "Cobalt Qube2";
+ case COBALT_BRD_ID_RAQ2:
+ return "Cobalt RaQ2";
+ }
return "MIPS Cobalt";
}
static void __init cobalt_timer_setup(struct irqaction *irq)
{
- /* Load timer value for 150 Hz */
- GALILEO_OUTL(500000, GT_TC0_OFS);
+ /* Load timer value for 1KHz (TCLK is 50MHz) */
+ GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS);
- /* Register our timer interrupt */
- setup_irq(COBALT_TIMER_IRQ, irq);
+ /* Enable timer */
+ GALILEO_OUTL(GALILEO_ENTC0 | GALILEO_SELTC0, GT_TC_CONTROL_OFS);
- /* Enable timer ints */
- GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);
- /* Unmask timer int */
- GALILEO_OUTL(0x100, GT_INTRMASK_OFS);
+ /* Register interrupt */
+ setup_irq(COBALT_GALILEO_IRQ, irq);
+
+ /* Enable interrupt */
+ GALILEO_OUTL(GALILEO_INTR_T0EXP | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
}
extern struct pci_ops gt64111_pci_ops;
static struct resource cobalt_mem_resource = {
- "GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM
+ "PCI memory", GT64111_MEM_BASE, GT64111_MEM_END, IORESOURCE_MEM
};
static struct resource cobalt_io_resource = {
- "GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO
+ "PCI I/O", 0x1000, 0xffff, IORESOURCE_IO
};
static struct resource cobalt_io_resources[] = {
@@ -86,11 +88,12 @@ static struct pci_controller cobalt_pci_controller = {
.mem_resource = &cobalt_mem_resource,
.mem_offset = 0,
.io_resource = &cobalt_io_resource,
- .io_offset = 0x00001000UL - GT64111_IO_BASE
+ .io_offset = 0 - GT64111_IO_BASE
};
void __init plat_setup(void)
{
+ static struct uart_port uart;
unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
int i;
@@ -100,7 +103,10 @@ void __init plat_setup(void)
board_timer_setup = cobalt_timer_setup;
- set_io_port_base(KSEG1ADDR(GT64111_IO_BASE));
+ set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
+
+ /* I/O port resource must include UART and LCD/buttons */
+ ioport_resource.end = 0x0fffffff;
/*
* This is a prom style console. We just poke at the
@@ -120,25 +126,61 @@ void __init plat_setup(void)
cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);
+ printk("Cobalt board ID: %d\n", cobalt_board_id);
+
#ifdef CONFIG_PCI
register_pci_controller(&cobalt_pci_controller);
#endif
+
+#ifdef CONFIG_SERIAL_8250
+ if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
+
+ uart.line = 0;
+ uart.type = PORT_UNKNOWN;
+ uart.uartclk = 18432000;
+ uart.irq = COBALT_SERIAL_IRQ;
+ uart.flags = STD_COM_FLAGS;
+ uart.iobase = 0xc800000;
+ uart.iotype = UPIO_PORT;
+
+ early_serial_setup(&uart);
+ }
+#endif
}
/*
* Prom init. We read our one and only communication with the firmware.
- * Grab the amount of installed memory
+ * Grab the amount of installed memory.
+ * Better boot loaders (CoLo) pass a command line too :-)
*/
void __init prom_init(void)
{
- int argc = fw_arg0;
-
- strcpy(arcs_cmdline, my_cmdline);
+ int narg, indx, posn, nchr;
+ unsigned long memsz;
+ char **argv;
mips_machgroup = MACH_GROUP_COBALT;
- add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);
+ memsz = fw_arg0 & 0x7fff0000;
+ narg = fw_arg0 & 0x0000ffff;
+
+ if (narg) {
+ arcs_cmdline[0] = '\0';
+ argv = (char **) fw_arg1;
+ posn = 0;
+ for (indx = 1; indx < narg; ++indx) {
+ nchr = strlen(argv[indx]);
+ if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
+ break;
+ if (posn)
+ arcs_cmdline[posn++] = ' ';
+ strcpy(arcs_cmdline + posn, argv[indx]);
+ posn += nchr;
+ }
+ }
+
+ add_memory_region(0x0, memsz, BOOT_MEM_RAM);
}
unsigned long __init prom_free_prom_memory(void)