diff options
Diffstat (limited to 'arch/mips/pci')
-rw-r--r-- | arch/mips/pci/Makefile | 3 | ||||
-rw-r--r-- | arch/mips/pci/fixup-atlas.c | 41 | ||||
-rw-r--r-- | arch/mips/pci/fixup-au1000.c | 78 | ||||
-rw-r--r-- | arch/mips/pci/fixup-cobalt.c | 55 | ||||
-rw-r--r-- | arch/mips/pci/fixup-pnx8550.c | 57 | ||||
-rw-r--r-- | arch/mips/pci/fixup-tx4938.c | 92 | ||||
-rw-r--r-- | arch/mips/pci/ops-au1000.c | 14 | ||||
-rw-r--r-- | arch/mips/pci/ops-bonito64.c | 14 | ||||
-rw-r--r-- | arch/mips/pci/ops-gt64111.c | 10 | ||||
-rw-r--r-- | arch/mips/pci/ops-gt64120.c | 10 | ||||
-rw-r--r-- | arch/mips/pci/ops-msc.c | 31 | ||||
-rw-r--r-- | arch/mips/pci/ops-nile4.c | 2 | ||||
-rw-r--r-- | arch/mips/pci/ops-pnx8550.c | 284 | ||||
-rw-r--r-- | arch/mips/pci/ops-tx4938.c | 198 | ||||
-rw-r--r-- | arch/mips/pci/pci-bcm1480.c | 265 | ||||
-rw-r--r-- | arch/mips/pci/pci-bcm1480ht.c | 224 | ||||
-rw-r--r-- | arch/mips/pci/pci-ip27.c | 7 | ||||
-rw-r--r-- | arch/mips/pci/pci-ip32.c | 4 | ||||
-rw-r--r-- | arch/mips/pci/pci-lasat.c | 56 | ||||
-rw-r--r-- | arch/mips/pci/pci.c | 19 |
20 files changed, 1277 insertions, 187 deletions
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 83d81c9cdc2..7b746830402 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_MIPS_ITE8172) += fixup-ite8172g.o obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o +obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o @@ -45,11 +46,13 @@ obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \ obj-$(CONFIG_SGI_IP27) += pci-ip27.o obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o +obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-tx4938.o ops-tx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c index 2406835833d..87920b24593 100644 --- a/arch/mips/pci/fixup-atlas.c +++ b/arch/mips/pci/fixup-atlas.c @@ -1,14 +1,37 @@ +/* + * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki <macro@mips.com> + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ #include <linux/config.h> #include <linux/init.h> #include <linux/pci.h> + #include <asm/mips-boards/atlasint.h> -#define INTD ATLASINT_INTD -#define INTC ATLASINT_INTC -#define INTB ATLASINT_INTB +#define PCIA ATLASINT_PCIA +#define PCIB ATLASINT_PCIB +#define PCIC ATLASINT_PCIC +#define PCID ATLASINT_PCID #define INTA ATLASINT_INTA -#define SCSI ATLASINT_SCSI +#define INTB ATLASINT_INTB #define ETH ATLASINT_ETH +#define INTC ATLASINT_INTC +#define SCSI ATLASINT_SCSI +#define INTD ATLASINT_INTD static char irq_tab[][5] __initdata = { /* INTA INTB INTC INTD */ @@ -27,13 +50,13 @@ static char irq_tab[][5] __initdata = { {0, 0, 0, 0, 0 }, /* 12: Unused */ {0, 0, 0, 0, 0 }, /* 13: Unused */ {0, 0, 0, 0, 0 }, /* 14: Unused */ - {0, 0, 0, 0, 0 }, /* 15: Unused */ + {0, PCIA, PCIB, PCIC, PCID }, /* 15: cPCI (behind 21150) */ {0, SCSI, 0, 0, 0 }, /* 16: SYM53C810A SCSI */ {0, 0, 0, 0, 0 }, /* 17: Core */ - {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot 1 */ - {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Ethernet */ - {0, 0, 0, 0, 0 }, /* 20: PCI Slot 3 */ - {0, 0, 0, 0, 0 } /* 21: PCI Slot 4 */ + {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot */ + {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Eth. et al. */ + {0, 0, 0, 0, 0 }, /* 20: Unused */ + {0, 0, 0, 0, 0 } /* 21: Unused */ }; int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c index 39fe2b16fce..c2f8304fe55 100644 --- a/arch/mips/pci/fixup-au1000.c +++ b/arch/mips/pci/fixup-au1000.c @@ -26,7 +26,6 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -34,82 +33,7 @@ #include <asm/mach-au1x00/au1000.h> -/* - * Shortcut - */ -#ifdef CONFIG_SOC_AU1500 -#define INTA AU1000_PCI_INTA -#define INTB AU1000_PCI_INTB -#define INTC AU1000_PCI_INTC -#define INTD AU1000_PCI_INTD -#endif - -#ifdef CONFIG_SOC_AU1550 -#define INTA AU1550_PCI_INTA -#define INTB AU1550_PCI_INTB -#define INTC AU1550_PCI_INTC -#define INTD AU1550_PCI_INTD -#endif - -#define INTX 0xFF /* not valid */ - -#ifdef CONFIG_MIPS_DB1500 -static char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_BOSPORUS -static char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */ - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_MIRAGE -static char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */ - [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */ - [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */ -}; -#endif - -#ifdef CONFIG_MIPS_DB1550 -static char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - -#ifdef CONFIG_MIPS_PB1500 -static char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_PB1550 -static char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - -#ifdef CONFIG_MIPS_MTX1 -static char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ -}; -#endif +extern char irq_tab_alchemy[][5]; int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index 57e1ca2116b..909292f50d0 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -21,6 +21,20 @@ extern int cobalt_board_id; +static void qube_raq_galileo_early_fixup(struct pci_dev *dev) +{ + if (dev->devfn == PCI_DEVFN(0, 0) && + (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) { + + dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff); + + printk(KERN_INFO "Galileo: fixed bridge class\n"); + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, + qube_raq_galileo_early_fixup); + static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev) { unsigned short cfgword; @@ -48,6 +62,9 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) { unsigned short galileo_id; + if (dev->devfn != PCI_DEVFN(0, 0)) + return; + /* Fix PCI latency-timer and cache-line-size values in Galileo * host bridge. */ @@ -55,6 +72,13 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7); /* + * The code described by the comment below has been removed + * as it causes bus mastering by the Ethernet controllers + * to break under any kind of network load. We always set + * the retry timeouts to their maximum. + * + * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x-- + * * On all machines prior to Q2, we had the STOP line disconnected * from Galileo to VIA on PCI. The new Galileo does not function * correctly unless we have it connected. @@ -64,21 +88,43 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) */ pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id); galileo_id &= 0xff; /* mask off class info */ + + printk(KERN_INFO "Galileo: revision %u\n", galileo_id); + +#if 0 if (galileo_id >= 0x10) { /* New Galileo, assumes PCI stop line to VIA is connected. */ GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS); - } else if (galileo_id == 0x1 || galileo_id == 0x2) { + } else if (galileo_id == 0x1 || galileo_id == 0x2) +#endif + { signed int timeo; /* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */ timeo = GALILEO_INL(GT_PCI0_TOR_OFS); /* Old Galileo, assumes PCI STOP line to VIA is disconnected. */ - GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS); + GALILEO_OUTL( + (0xff << 16) | /* retry count */ + (0xff << 8) | /* timeout 1 */ + 0xff, /* timeout 0 */ + GT_PCI0_TOR_OFS); + + /* enable PCI retry exceeded interrupt */ + GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS); } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID, +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, qube_raq_galileo_fixup); +static char irq_tab_qube1[] __initdata = { + [COBALT_PCICONF_CPU] = 0, + [COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ, + [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ, + [COBALT_PCICONF_VIA] = 0, + [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ, + [COBALT_PCICONF_ETH1] = 0 +}; + static char irq_tab_cobalt[] __initdata = { [COBALT_PCICONF_CPU] = 0, [COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ, @@ -99,6 +145,9 @@ static char irq_tab_raq2[] __initdata = { int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + if (cobalt_board_id < COBALT_BRD_ID_QUBE2) + return irq_tab_qube1[slot]; + if (cobalt_board_id == COBALT_BRD_ID_RAQ2) return irq_tab_raq2[slot]; diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c new file mode 100644 index 00000000000..4256b3b30b7 --- /dev/null +++ b/arch/mips/pci/fixup-pnx8550.c @@ -0,0 +1,57 @@ +/* + * Philips PNX8550 pci fixups. + * + * Copyright 2005 Embedded Alley Solutions, Inc + * source@embeddealley.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach-pnx8550/pci.h> +#include <asm/mach-pnx8550/int.h> + + +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +extern char irq_tab_jbs[][5]; + +void __init pcibios_fixup_resources(struct pci_dev *dev) +{ + /* no need to fixup IO resources */ +} + +void __init pcibios_fixup(void) +{ + /* nothing to do here */ +} + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + return irq_tab_jbs[slot][pin]; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c new file mode 100644 index 00000000000..f455520ada8 --- /dev/null +++ b/arch/mips/pci/fixup-tx4938.c @@ -0,0 +1,92 @@ +/* + * Toshiba rbtx4938 pci routines + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/tx4938/rbtx4938.h> + +extern struct pci_controller tx4938_pci_controller[]; + +int pci_get_irq(struct pci_dev *dev, int pin) +{ + int irq = pin; + u8 slot = PCI_SLOT(dev->devfn); + struct pci_controller *controller = (struct pci_controller *)dev->sysdata; + + if (controller == &tx4938_pci_controller[1]) { + /* TX4938 PCIC1 */ + switch (slot) { + case TX4938_PCIC_IDSEL_AD_TO_SLOT(31): + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL) + return RBTX4938_IRQ_IRC + TX4938_IR_ETH0; + break; + case TX4938_PCIC_IDSEL_AD_TO_SLOT(30): + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL) + return RBTX4938_IRQ_IRC + TX4938_IR_ETH1; + break; + } + return 0; + } + + /* IRQ rotation */ + irq--; /* 0-3 */ + if (dev->bus->parent == NULL && + (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) { + /* PCI CardSlot (IDSEL=A23) */ + /* PCIA => PCIA (IDSEL=A23) */ + irq = (irq + 0 + slot) % 4; + } else { + /* PCI Backplane */ + irq = (irq + 33 - slot) % 4; + } + irq++; /* 1-4 */ + + switch (irq) { + case 1: + irq = RBTX4938_IRQ_IOC_PCIA; + break; + case 2: + irq = RBTX4938_IRQ_IOC_PCIB; + break; + case 3: + irq = RBTX4938_IRQ_IOC_PCIC; + break; + case 4: + irq = RBTX4938_IRQ_IOC_PCID; + break; + } + return irq; +} + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + unsigned char irq = 0; + + irq = pci_get_irq(dev, pin); + + printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n", + dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn), + PCI_FUNC(dev->devfn), irq); + + return irq; +} + +/* + * Do platform specific device initialization at pci_enable_device() time + */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c index c1c91ca0f9c..be1420126c4 100644 --- a/arch/mips/pci/ops-au1000.c +++ b/arch/mips/pci/ops-au1000.c @@ -50,11 +50,6 @@ int (*board_pci_idsel)(unsigned int devsel, int assert); -/* CP0 hazard avoidance. */ -#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ - "nop; nop; nop; nop;\t" \ - ".set reorder\n\t") - void mod_wired_entry(int entry, unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask) @@ -66,16 +61,12 @@ void mod_wired_entry(int entry, unsigned long entrylo0, old_ctx = read_c0_entryhi() & 0xff; old_pagemask = read_c0_pagemask(); write_c0_index(entry); - BARRIER; write_c0_pagemask(pagemask); write_c0_entryhi(entryhi); write_c0_entrylo0(entrylo0); write_c0_entrylo1(entrylo1); - BARRIER; tlb_write_indexed(); - BARRIER; write_c0_entryhi(old_ctx); - BARRIER; write_c0_pagemask(old_pagemask); } @@ -128,9 +119,8 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, last_entryLo0 = last_entryLo1 = 0xffffffff; } - /* Since the Au1xxx doesn't do the idsel timing exactly to spec, - * many board vendors implement their own off-chip idsel, so call - * it now. If it doesn't succeed, may as well bail out at this point. + /* Allow board vendors to implement their own off-chip idsel. + * If it doesn't succeed, may as well bail out at this point. */ if (board_pci_idsel) { if (board_pci_idsel(device, 1) == 0) { diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index 4b4e086a7eb..dc35270b65a 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -1,6 +1,8 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard <carstenl@mips.com> + * Maciej W. Rozycki <macro@mips.com> * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -17,7 +19,6 @@ * * MIPS boards specific PCI support. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -57,13 +58,6 @@ static int bonito64_pcibios_config_access(unsigned char access_type, return -1; } -#ifdef CONFIG_MIPS_BOARDS_GEN - if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) { - /* MIPS Core boards have Bonito connected as device 17 */ - return -1; - } -#endif - /* Clear cause register bits */ BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR | BONITO_PCICMD_MTABORT_CLR); diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c index c5b0fc184c2..c1807934768 100644 --- a/arch/mips/pci/ops-gt64111.c +++ b/arch/mips/pci/ops-gt64111.c @@ -18,15 +18,15 @@ #include <asm/cobalt/cobalt.h> /* - * Accessing device 31 hangs the GT64120. Not sure if this will also hang - * the GT64111, let's be paranoid for now. + * Device 31 on the GT64111 is used to generate PCI special + * cycles, so we shouldn't expected to find a device there ... */ static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn) { - if (bus->number == 0 && devfn == PCI_DEVFN(31, 0)) - return -1; + if (bus->number == 0 && PCI_SLOT(devfn) < 31) + return 0; - return 0; + return -1; } static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn, diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64120.c index 7b99dfa33df..6335844d607 100644 --- a/arch/mips/pci/ops-gt64120.c +++ b/arch/mips/pci/ops-gt64120.c @@ -1,6 +1,8 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard <carstenl@mips.com> + * Maciej W. Rozycki <macro@mips.com> * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -43,10 +45,6 @@ static int gt64120_pcibios_config_access(unsigned char access_type, unsigned char busnum = bus->number; u32 intr; - if ((busnum == 0) && (PCI_SLOT(devfn) == 0)) - /* Galileo itself is devfn 0, don't move it around */ - return -1; - if ((busnum == 0) && (devfn >= PCI_DEVFN(31, 0))) return -1; /* Because of a bug in the galileo (for slot 31). */ diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c index 7bc099643a9..5d9fbb0f467 100644 --- a/arch/mips/pci/ops-msc.c +++ b/arch/mips/pci/ops-msc.c @@ -21,7 +21,6 @@ * MIPS boards specific PCI support. * */ -#include <linux/config.h> #include <linux/types.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -49,34 +48,17 @@ static int msc_pcibios_config_access(unsigned char access_type, struct pci_bus *bus, unsigned int devfn, int where, u32 * data) { unsigned char busnum = bus->number; - unsigned char type; u32 intr; -#ifdef CONFIG_MIPS_BOARDS_GEN - if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) { - /* MIPS Core boards have SOCit connected as device 17 */ - return -1; - } -#endif - /* Clear status register bits. */ MSC_WRITE(MSC01_PCI_INTSTAT, (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)); - /* Setup address */ - if (busnum == 0) - type = 0; /* Type 0 */ - else - type = 1; /* Type 1 */ - MSC_WRITE(MSC01_PCI_CFGADDR, ((busnum << MSC01_PCI_CFGADDR_BNUM_SHF) | - (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) - | (PCI_FUNC(devfn) << - MSC01_PCI_CFGADDR_FNUM_SHF) | ((where / - 4) << - MSC01_PCI_CFGADDR_RNUM_SHF) - | (type))); + (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) | + (PCI_FUNC(devfn) << MSC01_PCI_CFGADDR_FNUM_SHF) | + ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF))); /* Perform access */ if (access_type == PCI_ACCESS_WRITE) @@ -86,15 +68,12 @@ static int msc_pcibios_config_access(unsigned char access_type, /* Detect Master/Target abort */ MSC_READ(MSC01_PCI_INTSTAT, intr); - if (intr & (MSC01_PCI_INTCFG_MA_BIT | - MSC01_PCI_INTCFG_TA_BIT)) { + if (intr & (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)) { /* Error occurred */ /* Clear bits */ - MSC_READ(MSC01_PCI_INTSTAT, intr); MSC_WRITE(MSC01_PCI_INTSTAT, - (MSC01_PCI_INTCFG_MA_BIT | - MSC01_PCI_INTCFG_TA_BIT)); + (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)); return -1; } diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c index a7169928b35..a8d38dc8c50 100644 --- a/arch/mips/pci/ops-nile4.c +++ b/arch/mips/pci/ops-nile4.c @@ -15,7 +15,7 @@ volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE; -static spinlock_t nile4_pci_lock; +static DEFINE_SPINLOCK(nile4_pci_lock); static int nile4_pcibios_config_access(unsigned char access_type, struct pci_bus *bus, unsigned int devfn, int where, u32 * val) diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c new file mode 100644 index 00000000000..454b65cc335 --- /dev/null +++ b/arch/mips/pci/ops-pnx8550.c @@ -0,0 +1,284 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * + * 2.6 port, Embedded Alley Solutions, Inc + * + * Based on: + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/delay.h> + +#include <asm/mach-pnx8550/pci.h> +#include <asm/mach-pnx8550/glb.h> +#include <asm/debug.h> + + +static inline void clear_status(void) +{ + unsigned long pci_stat; + + pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS); + outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR); +} + +static inline unsigned int +calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where) +{ + unsigned int addr; + + addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0); + addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc); + + return addr; +} + +static int +config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val) +{ + unsigned int flags; + unsigned long loops = 0; + unsigned long ioaddr = calc_cfg_addr(bus, devfn, where); + + local_irq_save(flags); + /*Clear pending interrupt status */ + if (inl(PCI_BASE | PCI_GPPM_STATUS)) { + clear_status(); + while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ; + } + + outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR); + + if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE)) + outl(*val, PCI_BASE | PCI_GPPM_WDAT); + + outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK), + PCI_BASE | PCI_GPPM_CTRL); + + loops = + ((loops_per_jiffy * + PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT)); + while (1) { + if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) { + if ((pci_cmd == PCI_CMD_IOR) || + (pci_cmd == PCI_CMD_CONFIG_READ)) + *val = inl(PCI_BASE | PCI_GPPM_RDAT); + clear_status(); + local_irq_restore(flags); + return PCIBIOS_SUCCESSFUL; + } else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) { + break; + } + + loops--; + if (loops == 0) { + printk("%s : Arbiter Locked.\n", __FUNCTION__); + } + } + + clear_status(); + if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) { + printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n", + __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr, + pci_cmd); + } + + if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ)) + *val = 0xffffffff; + local_irq_restore(flags); + return PCIBIOS_DEVICE_NOT_FOUND; +} + +/* + * We can't address 8 and 16 bit words directly. Instead we have to + * read/write a 32bit word and mask/modify the data we actually want. + */ +static int +read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val) +{ + unsigned int data = 0; + int err; + + if (bus == 0) + return -1; + + err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data); + switch (where & 0x03) { + case 0: + *val = (unsigned char)(data & 0x000000ff); + break; + case 1: + *val = (unsigned char)((data & 0x0000ff00) >> 8); + break; + case 2: + *val = (unsigned char)((data & 0x00ff0000) >> 16); + break; + case 3: + *val = (unsigned char)((data & 0xff000000) >> 24); + break; + } + + return err; +} + +static int +read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val) +{ + unsigned int data = 0; + int err; + + if (bus == 0) + return -1; + + if (where & 0x01) + return PCIBIOS_BAD_REGISTER_NUMBER; + + err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data); + switch (where & 0x02) { + case 0: + *val = (unsigned short)(data & 0x0000ffff); + break; + case 2: + *val = (unsigned short)((data & 0xffff0000) >> 16); + break; + } + + return err; +} + +static int +read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val) +{ + int err; + if (bus == 0) + return -1; + + if (where & 0x03) + return PCIBIOS_BAD_REGISTER_NUMBER; + + err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val); + + return err; +} + +static int +write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val) +{ + unsigned int data = (unsigned int)val; + int err; + + if (bus == 0) + return -1; + + switch (where & 0x03) { + case 1: + data = (data << 8); + break; + case 2: + data = (data << 16); + break; + case 3: + data = (data << 24); + break; + default: + break; + } + + err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data); + + return err; +} + +static int +write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val) +{ + unsigned int data = (unsigned int)val; + int err; + + if (bus == 0) + return -1; + + if (where & 0x01) + return PCIBIOS_BAD_REGISTER_NUMBER; + + switch (where & 0x02) { + case 2: + data = (data << 16); + break; + default: + break; + } + err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data); + + return err; +} + +static int +write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val) +{ + int err; + if (bus == 0) + return -1; + + if (where & 0x03) + return PCIBIOS_BAD_REGISTER_NUMBER; + + err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val); + + return err; +} + +static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) +{ + switch (size) { + case 1: { + u8 _val; + int rc = read_config_byte(bus, devfn, where, &_val); + *val = _val; + return rc; + } + case 2: { + u16 _val; + int rc = read_config_word(bus, devfn, where, &_val); + *val = _val; + return rc; + } + default: + return read_config_dword(bus, devfn, where, val); + } +} + +static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) +{ + switch (size) { + case 1: + return write_config_byte(bus, devfn, where, (u8) val); + case 2: + return write_config_word(bus, devfn, where, (u16) val); + default: + return write_config_dword(bus, devfn, where, val); + } +} + +struct pci_ops pnx8550_pci_ops = { + config_read, + config_write +}; diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c new file mode 100644 index 00000000000..4c0dcfce529 --- /dev/null +++ b/arch/mips/pci/ops-tx4938.c @@ -0,0 +1,198 @@ +/* + * Define the pci_ops for the Toshiba rbtx4938 + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/addrspace.h> +#include <asm/tx4938/rbtx4938.h> + +/* initialize in setup */ +struct resource pci_io_resource = { + .name = "pci IO space", + .start = 0, + .end = 0, + .flags = IORESOURCE_IO +}; + +/* initialize in setup */ +struct resource pci_mem_resource = { + .name = "pci memory space", + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM +}; + +struct resource tx4938_pcic1_pci_io_resource = { + .name = "PCI1 IO", + .start = 0, + .end = 0, + .flags = IORESOURCE_IO +}; +struct resource tx4938_pcic1_pci_mem_resource = { + .name = "PCI1 mem", + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM +}; + +static int mkaddr(int bus, int dev_fn, int where, int *flagsp) +{ + if (bus > 0) { + /* Type 1 configuration */ + tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | + ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1; + } else { + if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0)) + return -1; + + /* Type 0 configuration */ + tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | + ((dev_fn & 0xff) << 0x08) | (where & 0xfc); + } + /* clear M_ABORT and Disable M_ABORT Int. */ + tx4938_pcicptr->pcistatus = + (tx4938_pcicptr->pcistatus & 0x0000ffff) | + (PCI_STATUS_REC_MASTER_ABORT << 16); + tx4938_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; + + return 0; +} + +static int check_abort(int flags) +{ + int code = PCIBIOS_SUCCESSFUL; + /* wait write cycle completion before checking error status */ + while (tx4938_pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB) + ; + if (tx4938_pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { + tx4938_pcicptr->pcistatus = + (tx4938_pcicptr-> + pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT + << 16); + tx4938_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; + code = PCIBIOS_DEVICE_NOT_FOUND; + } + return code; +} + +static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 * val) +{ + int flags, retval, dev, busno, func; + + dev = PCI_SLOT(devfn); + func = PCI_FUNC(devfn); + + /* check if the bus is top-level */ + if (bus->parent != NULL) + busno = bus->number; + else { + busno = 0; + } + + if (mkaddr(busno, devfn, where, &flags)) + return -1; + + switch (size) { + case 1: + *val = *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata | +#ifdef __BIG_ENDIAN + ((where & 3) ^ 3)); +#else + (where & 3)); +#endif + break; + case 2: + *val = *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata | +#ifdef __BIG_ENDIAN + ((where & 3) ^ 2)); +#else + (where & 3)); +#endif + break; + case 4: + *val = tx4938_pcicptr->g2pcfgdata; + break; + } + + retval = check_abort(flags); + if (retval == PCIBIOS_DEVICE_NOT_FOUND) + *val = 0xffffffff; + + return retval; +} + +static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + int flags, dev, busno, func; + + busno = bus->number; + dev = PCI_SLOT(devfn); + func = PCI_FUNC(devfn); + + /* check if the bus is top-level */ + if (bus->parent != NULL) { + busno = bus->number; + } else { + busno = 0; + } + + if (mkaddr(busno, devfn, where, &flags)) + return -1; + + switch (size) { + case 1: + *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata | +#ifdef __BIG_ENDIAN + ((where & 3) ^ 3)) = val; +#else + (where & 3)) = val; +#endif + break; + case 2: + *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata | +#ifdef __BIG_ENDIAN + ((where & 0x3) ^ 0x2)) = val; +#else + (where & 3)) = val; +#endif + break; + case 4: + tx4938_pcicptr->g2pcfgdata = val; + break; + } + + return check_abort(flags); +} + +struct pci_ops tx4938_pci_ops = { + tx4938_pcibios_read_config, + tx4938_pcibios_write_config +}; + +struct pci_controller tx4938_pci_controller[] = { + /* h/w only supports devices 0x00 to 0x14 */ + { + .pci_ops = &tx4938_pci_ops, + .io_resource = &pci_io_resource, + .mem_resource = &pci_mem_resource, + }, + /* h/w only supports devices 0x00 to 0x14 */ + { + .pci_ops = &tx4938_pci_ops, + .io_resource = &tx4938_pcic1_pci_io_resource, + .mem_resource = &tx4938_pcic1_pci_mem_resource, + } +}; diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c new file mode 100644 index 00000000000..f194b4e4f86 --- /dev/null +++ b/arch/mips/pci/pci-bcm1480.c @@ -0,0 +1,265 @@ +/* + * Copyright (C) 2001,2002,2005 Broadcom Corporation + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * BCM1x80/1x55-specific PCI support + * + * This module provides the glue between Linux's PCI subsystem + * and the hardware. We basically provide glue for accessing + * configuration space, and set up the translation for I/O + * space accesses. + * + * To access configuration space, we use ioremap. In the 32-bit + * kernel, this consumes either 4 or 8 page table pages, and 16MB of + * kernel mapped memory. Hopefully neither of these should be a huge + * problem. + * + * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED. + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/console.h> +#include <linux/tty.h> + +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/bcm1480_scd.h> +#include <asm/sibyte/board.h> +#include <asm/io.h> + +/* + * Macros for calculating offsets into config space given a device + * structure or dev/fun/reg + */ +#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where)) +#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where) + +static void *cfg_space; + +#define PCI_BUS_ENABLED 1 +#define PCI_DEVICE_MODE 2 + +static int bcm1480_bus_status = 0; + +#define PCI_BRIDGE_DEVICE 0 + +/* + * Read/write 32-bit values in config space. + */ +static inline u32 READCFG32(u32 addr) +{ + return *(u32 *)(cfg_space + (addr&~3)); +} + +static inline void WRITECFG32(u32 addr, u32 data) +{ + *(u32 *)(cfg_space + (addr & ~3)) = data; +} + +int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + return dev->irq; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* + * Some checks before doing config cycles: + * In PCI Device Mode, hide everything on bus 0 except the LDT host + * bridge. Otherwise, access is controlled by bridge MasterEn bits. + */ +static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn) +{ + u32 devno; + + if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE))) + return 0; + + if (bus->number == 0) { + devno = PCI_SLOT(devfn); + if (bcm1480_bus_status & PCI_DEVICE_MODE) + return 0; + else + return 1; + } else + return 1; +} + +/* + * Read/write access functions for various sizes of values + * in config space. Return all 1's for disallowed accesses + * for a kludgy but adequate simulation of master aborts. + */ + +static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 * val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (bcm1480_pci_can_access(bus, devfn)) + data = READCFG32(CFGADDR(bus, devfn, where)); + else + data = 0xFFFFFFFF; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 cfgaddr = CFGADDR(bus, devfn, where); + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (!bcm1480_pci_can_access(bus, devfn)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + data = READCFG32(cfgaddr); + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else + data = val; + + WRITECFG32(cfgaddr, data); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops bcm1480_pci_ops = { + bcm1480_pcibios_read, + bcm1480_pcibios_write, +}; + +static struct resource bcm1480_mem_resource = { + .name = "BCM1480 PCI MEM", + .start = 0x30000000UL, + .end = 0x3fffffffUL, + .flags = IORESOURCE_MEM, +}; + +static struct resource bcm1480_io_resource = { + .name = "BCM1480 PCI I/O", + .start = 0x2c000000UL, + .end = 0x2dffffffUL, + .flags = IORESOURCE_IO, +}; + +struct pci_controller bcm1480_controller = { + .pci_ops = &bcm1480_pci_ops, + .mem_resource = &bcm1480_mem_resource, + .io_resource = &bcm1480_io_resource, +}; + + +static int __init bcm1480_pcibios_init(void) +{ + uint32_t cmdreg; + uint64_t reg; + extern int pci_probe_only; + + /* CFE will assign PCI resources */ + pci_probe_only = 1; + + /* Avoid ISA compat ranges. */ + PCIBIOS_MIN_IO = 0x00008000UL; + PCIBIOS_MIN_MEM = 0x01000000UL; + + /* Set I/O resource limits. - unlimited for now to accomodate HT */ + ioport_resource.end = 0xffffffffUL; + iomem_resource.end = 0xffffffffUL; + + cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024); + + /* + * See if the PCI bus has been configured by the firmware. + */ + reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG)); + if (!(reg & M_BCM1480_SYS_PCI_HOST)) { + bcm1480_bus_status |= PCI_DEVICE_MODE; + } else { + cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), + PCI_COMMAND)); + if (!(cmdreg & PCI_COMMAND_MASTER)) { + printk + ("PCI: Skipping PCI probe. Bus is not initialized.\n"); + iounmap(cfg_space); + return 1; /* XXX */ + } + bcm1480_bus_status |= PCI_BUS_ENABLED; + } + + /* turn on ExpMemEn */ + cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40)); + printk("PCIFeatureCtrl = %x\n", cmdreg); + WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40), + cmdreg | 0x10); + cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40)); + printk("PCIFeatureCtrl = %x\n", cmdreg); + + /* + * Establish mappings in KSEG2 (kernel virtual) to PCI I/O + * space. Use "match bytes" policy to make everything look + * little-endian. So, you need to also set + * CONFIG_SWAP_IO_SPACE, but this is the combination that + * works correctly with most of Linux's drivers. + * XXX ehs: Should this happen in PCI Device mode? + */ + + set_io_port_base((unsigned long) + ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536)); + isa_slot_offset = (unsigned long) + ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024); + + register_pci_controller(&bcm1480_controller); + +#ifdef CONFIG_VGA_CONSOLE + take_over_console(&vga_con,0,MAX_NR_CONSOLES-1,1); +#endif + return 0; +} + +arch_initcall(bcm1480_pcibios_init); diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c new file mode 100644 index 00000000000..aca4a2e7a1c --- /dev/null +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2001,2002,2005 Broadcom Corporation + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * BCM1480/1455-specific HT support (looking like PCI) + * + * This module provides the glue between Linux's PCI subsystem + * and the hardware. We basically provide glue for accessing + * configuration space, and set up the translation for I/O + * space accesses. + * + * To access configuration space, we use ioremap. In the 32-bit + * kernel, this consumes either 4 or 8 page table pages, and 16MB of + * kernel mapped memory. Hopefully neither of these should be a huge + * problem. + * + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/console.h> +#include <linux/tty.h> + +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/bcm1480_scd.h> +#include <asm/sibyte/board.h> +#include <asm/io.h> + +/* + * Macros for calculating offsets into config space given a device + * structure or dev/fun/reg + */ +#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where)) +#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where) + +static void *ht_cfg_space; + +#define PCI_BUS_ENABLED 1 +#define PCI_DEVICE_MODE 2 + +static int bcm1480ht_bus_status = 0; + +#define PCI_BRIDGE_DEVICE 0 +#define HT_BRIDGE_DEVICE 1 + +/* + * HT's level-sensitive interrupts require EOI, which is generated + * through a 4MB memory-mapped region + */ +unsigned long ht_eoi_space; + +/* + * Read/write 32-bit values in config space. + */ +static inline u32 READCFG32(u32 addr) +{ + return *(u32 *)(ht_cfg_space + (addr&~3)); +} + +static inline void WRITECFG32(u32 addr, u32 data) +{ + *(u32 *)(ht_cfg_space + (addr & ~3)) = data; +} + +/* + * Some checks before doing config cycles: + * In PCI Device Mode, hide everything on bus 0 except the LDT host + * bridge. Otherwise, access is controlled by bridge MasterEn bits. + */ +static int bcm1480ht_can_access(struct pci_bus *bus, int devfn) +{ + u32 devno; + + if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE))) + return 0; + + if (bus->number == 0) { + devno = PCI_SLOT(devfn); + if (bcm1480ht_bus_status & PCI_DEVICE_MODE) + return 0; + } + return 1; +} + +/* + * Read/write access functions for various sizes of values + * in config space. Return all 1's for disallowed accesses + * for a kludgy but adequate simulation of master aborts. + */ + +static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 * val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (bcm1480ht_can_access(bus, devfn)) + data = READCFG32(CFGADDR(bus, devfn, where)); + else + data = 0xFFFFFFFF; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 cfgaddr = CFGADDR(bus, devfn, where); + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (!bcm1480ht_can_access(bus, devfn)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + data = READCFG32(cfgaddr); + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else + data = val; + + WRITECFG32(cfgaddr, data); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm1480ht_pcibios_get_busno(void) +{ + return 0; +} + +struct pci_ops bcm1480ht_pci_ops = { + .read = bcm1480ht_pcibios_read, + .write = bcm1480ht_pcibios_write, +}; + +static struct resource bcm1480ht_mem_resource = { + .name = "BCM1480 HT MEM", + .start = 0x40000000UL, + .end = 0x5fffffffUL, + .flags = IORESOURCE_MEM, +}; + +static struct resource bcm1480ht_io_resource = { + .name = "BCM1480 HT I/O", + .start = 0x00000000UL, + .end = 0x01ffffffUL, + .flags = IORESOURCE_IO, +}; + +struct pci_controller bcm1480ht_controller = { + .pci_ops = &bcm1480ht_pci_ops, + .mem_resource = &bcm1480ht_mem_resource, + .io_resource = &bcm1480ht_io_resource, + .index = 1, + .get_busno = bcm1480ht_pcibios_get_busno, +}; + +static int __init bcm1480ht_pcibios_init(void) +{ + uint32_t cmdreg; + + ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024); + + /* + * See if the PCI bus has been configured by the firmware. + */ + cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), + PCI_COMMAND)); + if (!(cmdreg & PCI_COMMAND_MASTER)) { + printk("HT: Skipping HT probe. Bus is not initialized.\n"); + iounmap(ht_cfg_space); + return 1; /* XXX */ + } + bcm1480ht_bus_status |= PCI_BUS_ENABLED; + + ht_eoi_space = (unsigned long) + ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES, + 4 * 1024 * 1024); + + register_pci_controller(&bcm1480ht_controller); + + return 0; +} + +arch_initcall(bcm1480ht_pcibios_init); diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 068e0e508e1..efc96ce99ee 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -485,5 +485,12 @@ static void __init pci_fixup_ioc3(struct pci_dev *d) pci_disable_swapping(d); } +int pcibus_to_node(struct pci_bus *bus) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); + + return bc->nasid; +} + DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, pci_fixup_ioc3); diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c index 000dc6af6cd..180af89bcb1 100644 --- a/arch/mips/pci/pci-ip32.c +++ b/arch/mips/pci/pci-ip32.c @@ -136,7 +136,9 @@ static int __init mace_init(void) BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0, "MACE PCI error", NULL)); - ioport_resource.end = mace_pci_io_resource.end; + iomem_resource = mace_pci_mem_resource; + ioport_resource = mace_pci_io_resource; + register_pci_controller(&mace_pci_controller); return 0; diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c index ae3cc4b254b..88fb191ad2e 100644 --- a/arch/mips/pci/pci-lasat.c +++ b/arch/mips/pci/pci-lasat.c @@ -7,12 +7,8 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/pci.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/delay.h> #include <asm/bootinfo.h> extern struct pci_ops nile4_pci_ops; @@ -20,14 +16,14 @@ extern struct pci_ops gt64120_pci_ops; static struct resource lasat_pci_mem_resource = { .name = "LASAT PCI MEM", .start = 0x18000000, - .end = 0x19FFFFFF, + .end = 0x19ffffff, .flags = IORESOURCE_MEM, }; static struct resource lasat_pci_io_resource = { .name = "LASAT PCI IO", .start = 0x1a000000, - .end = 0x1bFFFFFF, + .end = 0x1bffffff, .flags = IORESOURCE_IO, }; @@ -38,23 +34,25 @@ static struct pci_controller lasat_pci_controller = { static int __init lasat_pci_setup(void) { - printk("PCI: starting\n"); + printk("PCI: starting\n"); - switch (mips_machtype) { - case MACH_LASAT_100: + switch (mips_machtype) { + case MACH_LASAT_100: lasat_pci_controller.pci_ops = >64120_pci_ops; break; - case MACH_LASAT_200: + case MACH_LASAT_200: lasat_pci_controller.pci_ops = &nile4_pci_ops; break; - default: + default: panic("pcibios_init: mips_machtype incorrect"); } register_pci_controller(&lasat_pci_controller); - return 0; + + return 0; } -early_initcall(lasat_pci_setup); + +arch_initcall(lasat_pci_setup); #define LASATINT_ETH1 0 #define LASATINT_ETH0 1 @@ -68,24 +66,22 @@ early_initcall(lasat_pci_setup); int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - switch (slot) { - case 1: - return LASATINT_PCIA; /* Expansion Module 0 */ - case 2: - return LASATINT_PCIB; /* Expansion Module 1 */ - case 3: - return LASATINT_PCIC; /* Expansion Module 2 */ - case 4: - return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */ - case 5: - return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */ - case 6: - return LASATINT_HDC; /* IDE controller */ - default: - return 0xff; /* Illegal */ - } + switch (slot) { + case 1: + case 2: + case 3: + return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4); + case 4: + return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */ + case 5: + return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */ + case 6: + return LASATINT_HDC; /* IDE controller */ + default: + return 0xff; /* Illegal */ + } - return -1; + return -1; } /* Do platform specific device initialization at pci_enable_device() time */ diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index a8d499b0a36..21402ffd7c9 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -127,15 +127,20 @@ static int __init pcibios_init(void) if (!hose->iommu) PCI_DMA_BUS_IS_PHYS = 1; + if (hose->get_busno && pci_probe_only) + next_busno = (*hose->get_busno)(); + bus = pci_scan_bus(next_busno, hose->pci_ops, hose); hose->bus = bus; hose->need_domain_info = need_domain_info; - next_busno = bus->subordinate + 1; - /* Don't allow 8-bit bus number overflow inside the hose - - reserve some space for bridges. */ - if (next_busno > 224) { - next_busno = 0; - need_domain_info = 1; + if (bus) { + next_busno = bus->subordinate + 1; + /* Don't allow 8-bit bus number overflow inside the hose - + reserve some space for bridges. */ + if (next_busno > 224) { + next_busno = 0; + need_domain_info = 1; + } } continue; @@ -164,7 +169,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask) pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; - for(idx=0; idx<6; idx++) { + for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { /* Only set up the requested stuff */ if (!(mask & (1<<idx))) continue; |