aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/sni/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sni/setup.c')
-rw-r--r--arch/mips/sni/setup.c203
1 files changed, 203 insertions, 0 deletions
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
new file mode 100644
index 00000000000..8f67cee4317
--- /dev/null
+++ b/arch/mips/sni/setup.c
@@ -0,0 +1,203 @@
+/*
+ * Setup pointers to hardware-dependent routines.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 2000, 03, 04 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/config.h>
+#include <linux/eisa.h>
+#include <linux/hdreg.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/pci.h>
+#include <linux/console.h>
+#include <linux/fb.h>
+#include <linux/tty.h>
+
+#include <asm/arc/types.h>
+#include <asm/sgialib.h>
+#include <asm/bcache.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mc146818-time.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/traps.h>
+
+extern void sni_machine_restart(char *command);
+extern void sni_machine_halt(void);
+extern void sni_machine_power_off(void);
+
+static void __init sni_rm200_pci_timer_setup(struct irqaction *irq)
+{
+ /* set the clock to 100 Hz */
+ outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
+ outb_p(LATCH & 0xff , 0x40); /* LSB */
+ outb(LATCH >> 8 , 0x40); /* MSB */
+ setup_irq(0, irq);
+}
+
+/*
+ * A bit more gossip about the iron we're running on ...
+ */
+static inline void sni_pcimt_detect(void)
+{
+ char boardtype[80];
+ unsigned char csmsr;
+ char *p = boardtype;
+ unsigned int asic;
+
+ csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
+
+ p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
+ if ((csmsr & 0x80) == 0)
+ p += sprintf(p, ", board revision %s",
+ (csmsr & 0x20) ? "D" : "C");
+ asic = csmsr & 0x80;
+ asic = (csmsr & 0x08) ? asic : !asic;
+ p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
+ printk("%s.\n", boardtype);
+}
+
+static void __init sni_display_setup(void)
+{
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ struct screen_info *si = &screen_info;
+ DISPLAY_STATUS *di;
+
+ di = ArcGetDisplayStatus(1);
+
+ if (di) {
+ si->orig_x = di->CursorXPosition;
+ si->orig_y = di->CursorYPosition;
+ si->orig_video_cols = di->CursorMaxXPosition;
+ si->orig_video_lines = di->CursorMaxYPosition;
+ si->orig_video_isVGA = VIDEO_TYPE_VGAC;
+ si->orig_video_points = 16;
+ }
+#endif
+#endif
+}
+
+static struct resource sni_io_resource = {
+ "PCIMT IO MEM", 0x00001000UL, 0x03bfffffUL, IORESOURCE_IO,
+};
+
+static struct resource pcimt_io_resources[] = {
+ { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
+ { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
+ { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
+ { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
+ { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
+ { "PCI config data", 0xcfc, 0xcff, IORESOURCE_BUSY }
+};
+
+static struct resource sni_mem_resource = {
+ "PCIMT PCI MEM", 0x10000000UL, 0xffffffffUL, IORESOURCE_MEM
+};
+
+/*
+ * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
+ * for other purposes. Be paranoid and allocate all of the before the PCI
+ * code gets a chance to to map anything else there ...
+ *
+ * This leaves the following areas available:
+ *
+ * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
+ * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
+ * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
+ * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
+ * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
+ */
+static struct resource pcimt_mem_resources[] = {
+ { "Video RAM area", 0x100a0000, 0x100bffff, IORESOURCE_BUSY },
+ { "ISA Reserved", 0x100c0000, 0x100fffff, IORESOURCE_BUSY },
+ { "PCI IO", 0x14000000, 0x17bfffff, IORESOURCE_BUSY },
+ { "Cache Replacement Area", 0x17c00000, 0x17ffffff, IORESOURCE_BUSY},
+ { "PCI INT Acknowledge", 0x1a000000, 0x1a000003, IORESOURCE_BUSY },
+ { "Boot PROM", 0x1fc00000, 0x1fc7ffff, IORESOURCE_BUSY},
+ { "Diag PROM", 0x1fc80000, 0x1fcfffff, IORESOURCE_BUSY},
+ { "X-Bus", 0x1fd00000, 0x1fdfffff, IORESOURCE_BUSY},
+ { "BIOS map", 0x1fe00000, 0x1fefffff, IORESOURCE_BUSY},
+ { "NVRAM / EEPROM", 0x1ff00000, 0x1ff7ffff, IORESOURCE_BUSY},
+ { "ASIC PCI", 0x1fff0000, 0x1fffefff, IORESOURCE_BUSY},
+ { "MP Agent", 0x1ffff000, 0x1fffffff, IORESOURCE_BUSY},
+ { "Main Memory", 0x20000000, 0x9fffffff, IORESOURCE_BUSY}
+};
+
+static void __init sni_resource_init(void)
+{
+ int i;
+
+ /* request I/O space for devices used on all i[345]86 PCs */
+ for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
+ request_resource(&ioport_resource, pcimt_io_resources + i);
+
+ /* request mem space for pcimt-specific devices */
+ for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
+ request_resource(&sni_mem_resource, pcimt_mem_resources + i);
+
+ ioport_resource.end = sni_io_resource.end;
+}
+
+extern struct pci_ops sni_pci_ops;
+
+static struct pci_controller sni_controller = {
+ .pci_ops = &sni_pci_ops,
+ .mem_resource = &sni_mem_resource,
+ .mem_offset = 0x10000000UL,
+ .io_resource = &sni_io_resource,
+ .io_offset = 0x00000000UL
+};
+
+static inline void sni_pcimt_time_init(void)
+{
+ rtc_get_time = mc146818_get_cmos_time;
+ rtc_set_time = mc146818_set_rtc_mmss;
+}
+
+static int __init sni_rm200_pci_setup(void)
+{
+ sni_pcimt_detect();
+ sni_pcimt_sc_init();
+ sni_pcimt_time_init();
+
+ set_io_port_base(SNI_PORT_BASE);
+ ioport_resource.end = sni_io_resource.end;
+
+ /*
+ * Setup (E)ISA I/O memory access stuff
+ */
+ isa_slot_offset = 0xb0000000;
+#ifdef CONFIG_EISA
+ EISA_bus = 1;
+#endif
+
+ sni_resource_init();
+ board_timer_setup = sni_rm200_pci_timer_setup;
+
+ _machine_restart = sni_machine_restart;
+ _machine_halt = sni_machine_halt;
+ _machine_power_off = sni_machine_power_off;
+
+ sni_display_setup();
+
+#ifdef CONFIG_PCI
+ register_pci_controller(&sni_controller);
+#endif
+
+ return 0;
+}
+
+early_initcall(sni_rm200_pci_setup);