aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kconfig27
-rw-r--r--arch/mips/Makefile6
-rw-r--r--arch/mips/basler/excite/excite_setup.c2
-rw-r--r--arch/mips/cobalt/Makefile1
-rw-r--r--arch/mips/cobalt/console.c8
-rw-r--r--arch/mips/cobalt/irq.c2
-rw-r--r--arch/mips/cobalt/pci.c47
-rw-r--r--arch/mips/cobalt/reset.c11
-rw-r--r--arch/mips/cobalt/setup.c32
-rw-r--r--arch/mips/configs/jmr3927_defconfig254
-rw-r--r--arch/mips/configs/pnx8550-v2pci_defconfig1540
-rw-r--r--arch/mips/gt64120/wrppmc/pci.c4
-rw-r--r--arch/mips/jmr3927/common/prom.c12
-rw-r--r--arch/mips/jmr3927/common/puts.c122
-rw-r--r--arch/mips/jmr3927/rbhma3100/Makefile1
-rw-r--r--arch/mips/jmr3927/rbhma3100/init.c16
-rw-r--r--arch/mips/jmr3927/rbhma3100/irq.c312
-rw-r--r--arch/mips/jmr3927/rbhma3100/kgdb_io.c54
-rw-r--r--arch/mips/jmr3927/rbhma3100/setup.c157
-rw-r--r--arch/mips/kernel/asm-offsets.c1
-rw-r--r--arch/mips/kernel/i8259.c4
-rw-r--r--arch/mips/kernel/kspd.c5
-rw-r--r--arch/mips/kernel/r2300_switch.S10
-rw-r--r--arch/mips/kernel/r4k_switch.S10
-rw-r--r--arch/mips/kernel/rtlx.c7
-rw-r--r--arch/mips/kernel/signal-common.h9
-rw-r--r--arch/mips/kernel/signal.c52
-rw-r--r--arch/mips/kernel/signal32.c52
-rw-r--r--arch/mips/kernel/traps.c25
-rw-r--r--arch/mips/mips-boards/generic/display.c8
-rw-r--r--arch/mips/mips-boards/generic/pci.c4
-rw-r--r--arch/mips/mips-boards/generic/reset.c12
-rw-r--r--arch/mips/mips-boards/malta/malta_int.c4
-rw-r--r--arch/mips/mips-boards/malta/malta_setup.c4
-rw-r--r--arch/mips/mm/cache.c2
-rw-r--r--arch/mips/mm/init.c25
-rw-r--r--arch/mips/oprofile/op_model_mipsxx.c2
-rw-r--r--arch/mips/pci/Makefile3
-rw-r--r--arch/mips/pci/fixup-jmr3927.c11
-rw-r--r--arch/mips/pci/ops-gt64111.c100
-rw-r--r--arch/mips/pci/ops-gt64xxx_pci0.c (renamed from arch/mips/pci/ops-gt64120.c)30
-rw-r--r--arch/mips/pci/ops-tx3927.c232
-rw-r--r--arch/mips/pci/pci-lasat.c4
-rw-r--r--arch/mips/pci/pci-ocelot.c2
-rw-r--r--arch/mips/pci/pci.c25
-rw-r--r--arch/mips/sgi-ip22/ip22-nvram.c24
-rw-r--r--arch/mips/sgi-ip22/ip22-time.c14
-rw-r--r--arch/mips/sibyte/Kconfig2
-rw-r--r--arch/mips/sibyte/common/Makefile5
-rw-r--r--arch/mips/sibyte/common/sb_tbprof.c (renamed from arch/mips/sibyte/sb1250/bcm1250_tbprof.c)158
-rw-r--r--arch/mips/sibyte/sb1250/Makefile1
-rw-r--r--arch/mips/sibyte/sb1250/setup.c12
-rw-r--r--arch/mips/sni/pcimt.c105
-rw-r--r--arch/mips/sni/pcit.c122
-rw-r--r--arch/mips/vr41xx/Kconfig92
55 files changed, 611 insertions, 3175 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c78b14380b3..130d825e543 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -10,7 +10,6 @@ menu "Machine selection"
config ZONE_DMA
bool
- default y
choice
prompt "System type"
@@ -165,7 +164,7 @@ config MIPS_COBALT
select HW_HAS_PCI
select I8259
select IRQ_CPU
- select MIPS_GT64111
+ select PCI_GT64XXX_PCI0
select SYS_HAS_CPU_NEVADA
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
@@ -207,7 +206,7 @@ config MIPS_EV64120
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select SYS_HAS_CPU_R5000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
@@ -245,7 +244,7 @@ config LASAT
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select MIPS_NILE4
select R5000_CPU_SCACHE
select SYS_HAS_CPU_R5000
@@ -263,7 +262,7 @@ config MIPS_ATLAS
select HW_HAS_PCI
select MIPS_BOARDS_GEN
select MIPS_BONITO64
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select MIPS_MSC
select RM7000_CPU_SCACHE
select SWAP_IO_SPACE
@@ -296,7 +295,7 @@ config MIPS_MALTA
select MIPS_BOARDS_GEN
select MIPS_BONITO64
select MIPS_CPU_SCACHE
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select MIPS_MSC
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
@@ -340,7 +339,7 @@ config WR_PPMC
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
@@ -398,7 +397,7 @@ config MOMENCO_OCELOT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
- select MIPS_GT64120
+ select PCI_GT64XXX_PCI0
select RM7000_CPU_SCACHE
select SWAP_IO_SPACE
select SYS_HAS_CPU_RM7000
@@ -501,10 +500,8 @@ config DDB5477
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
- bool "NEC VR41XX-based machines"
+ bool "NEC VR4100 series based machines"
select SYS_HAS_CPU_VR41XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select GENERIC_HARDIRQS_NO__DO_IRQ
config PMC_YOSEMITE
@@ -779,6 +776,7 @@ config TOSHIBA_JMR3927
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select TOSHIBA_BOARDS
+ select GENERIC_HARDIRQS_NO__DO_IRQ
config TOSHIBA_RBTX4927
bool "Toshiba TBTX49[23]7 board"
@@ -922,6 +920,7 @@ config SYS_HAS_EARLY_PRINTK
config GENERIC_ISA_DMA
bool
+ select ZONE_DMA
config I8259
bool
@@ -945,6 +944,7 @@ config MIPS_DISABLE_OBSOLETE_IDE
config GENERIC_ISA_DMA_SUPPORT_BROKEN
bool
+ select ZONE_DMA
#
# Endianess selection. Sufficiently obscure so many users don't know what to
@@ -999,10 +999,7 @@ config DDB5XXX_COMMON
config MIPS_BOARDS_GEN
bool
-config MIPS_GT64111
- bool
-
-config MIPS_GT64120
+config PCI_GT64XXX_PCI0
bool
config MIPS_TX3927
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 92bca6ad6ab..f2f742df32c 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -530,25 +530,29 @@ cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32
load-$(CONFIG_SGI_IP32) += 0xffffffff80004000
#
-# Sibyte SB1250 SOC
+# Sibyte SB1250/BCM1480 SOC
#
# This is a LIB so that it links at the end, and initcalls are later
# the sequence; but it is built as an object so that modules don't get
# removed (as happens, even if they have __initcall/module_init)
#
core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/
+core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/common/
cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/
+core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/common/
cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/
+core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/common/
cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/
+core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/common/
cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 42f0eda1d51..2f0e4c08eb0 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -63,7 +63,7 @@ volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
/* Protect access to shared GPI registers */
-spinlock_t titan_lock = SPIN_LOCK_UNLOCKED;
+DEFINE_SPINLOCK(titan_lock);
int titan_irqflags;
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index b36dd8f538f..de017c11f9b 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -4,5 +4,6 @@
obj-y := irq.o reset.o setup.o
+obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_EARLY_PRINTK) += console.o
obj-$(CONFIG_MTD_PHYSMAP) += mtd.o
diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c
index ca56b415b8a..0485d51f721 100644
--- a/arch/mips/cobalt/console.c
+++ b/arch/mips/cobalt/console.c
@@ -1,13 +1,11 @@
/*
* (C) P. Horton 2006
*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/console.h>
#include <linux/serial_reg.h>
+
#include <asm/addrspace.h>
-#include <asm/mach-cobalt/cobalt.h>
+
+#include <cobalt.h>
void prom_putchar(char c)
{
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index fe93b846923..950ad1e8be4 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -17,7 +17,7 @@
#include <asm/irq_cpu.h>
#include <asm/gt64120.h>
-#include <asm/mach-cobalt/cobalt.h>
+#include <cobalt.h>
/*
* We have two types of interrupts that we handle, ones that come in through
diff --git a/arch/mips/cobalt/pci.c b/arch/mips/cobalt/pci.c
new file mode 100644
index 00000000000..d91027f43de
--- /dev/null
+++ b/arch/mips/cobalt/pci.c
@@ -0,0 +1,47 @@
+/*
+ * Register PCI controller.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
+ *
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/gt64120.h>
+
+extern struct pci_ops gt64xxx_pci0_ops;
+
+static struct resource cobalt_mem_resource = {
+ .start = GT_DEF_PCI0_MEM0_BASE,
+ .end = GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
+ .name = "PCI memory",
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource cobalt_io_resource = {
+ .start = 0x1000,
+ .end = GT_DEF_PCI0_IO_SIZE - 1,
+ .name = "PCI I/O",
+ .flags = IORESOURCE_IO,
+};
+
+static struct pci_controller cobalt_pci_controller = {
+ .pci_ops = &gt64xxx_pci0_ops,
+ .mem_resource = &cobalt_mem_resource,
+ .io_resource = &cobalt_io_resource,
+ .io_offset = 0 - GT_DEF_PCI0_IO_BASE,
+};
+
+static int __init cobalt_pci_init(void)
+{
+ register_pci_controller(&cobalt_pci_controller);
+
+ return 0;
+}
+
+arch_initcall(cobalt_pci_init);
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 753dfccae6f..43cca21fdbc 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -8,15 +8,12 @@
* Copyright (C) 1995, 1996, 1997 by Ralf Baechle
* Copyright (C) 2001 by Liam Davies (ldavies@agile.tv)
*/
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/cacheflush.h>
+#include <linux/jiffies.h>
+
#include <asm/io.h>
-#include <asm/processor.h>
#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/mach-cobalt/cobalt.h>
+
+#include <cobalt.h>
void cobalt_machine_halt(void)
{
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index 88d34f11385..d0dd81790f7 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -19,12 +19,10 @@
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
-#include <asm/mach-cobalt/cobalt.h>
+#include <cobalt.h>
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
@@ -63,22 +61,6 @@ void __init plat_timer_setup(struct irqaction *irq)
GT_WRITE(GT_INTRMASK_OFS, GT_INTR_T0EXP_MSK | GT_READ(GT_INTRMASK_OFS));
}
-extern struct pci_ops gt64111_pci_ops;
-
-static struct resource cobalt_mem_resource = {
- .start = GT_DEF_PCI0_MEM0_BASE,
- .end = GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
- .name = "PCI memory",
- .flags = IORESOURCE_MEM
-};
-
-static struct resource cobalt_io_resource = {
- .start = 0x1000,
- .end = 0xffff,
- .name = "PCI I/O",
- .flags = IORESOURCE_IO
-};
-
/*
* Cobalt doesn't have PS/2 keyboard/mouse interfaces,
* keyboard conntroller is never used.
@@ -111,14 +93,6 @@ static struct resource cobalt_reserved_resources[] = {
},
};
-static struct pci_controller cobalt_pci_controller = {
- .pci_ops = &gt64111_pci_ops,
- .mem_resource = &cobalt_mem_resource,
- .mem_offset = 0,
- .io_resource = &cobalt_io_resource,
- .io_offset = 0 - GT_DEF_PCI0_IO_BASE,
-};
-
void __init plat_mem_setup(void)
{
static struct uart_port uart;
@@ -146,10 +120,6 @@ void __init plat_mem_setup(void)
printk("Cobalt board ID: %d\n", cobalt_board_id);
-#ifdef CONFIG_PCI
- register_pci_controller(&cobalt_pci_controller);
-#endif
-
if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
#ifdef CONFIG_SERIAL_8250
uart.line = 0;
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 21a094752da..068e48ec709 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:34 2007
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar 15 00:40:40 2007
#
CONFIG_MIPS=y
@@ -70,7 +70,7 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_CPU_BIG_ENDIAN=y
@@ -138,12 +138,12 @@ CONFIG_ZONE_DMA_FLAG=1
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -175,14 +175,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
@@ -217,11 +218,11 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -233,12 +234,10 @@ CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
-# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
@@ -250,10 +249,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
#
# Networking
@@ -267,12 +263,7 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
@@ -290,19 +281,18 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -343,13 +333,7 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -360,14 +344,12 @@ CONFIG_WIRELESS_EXT=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -396,16 +378,13 @@ CONFIG_PROC_EVENTS=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
-CONFIG_SGI_IOC4=y
+# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
@@ -416,7 +395,7 @@ CONFIG_SGI_IOC4=y
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=y
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
@@ -462,26 +441,13 @@ CONFIG_NETDEVICES=y
#
# PHY device support
#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
@@ -493,7 +459,27 @@ CONFIG_NET_ETHERNET=y
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_TC35815=y
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
#
# Ethernet (1000 Mbit)
@@ -509,20 +495,21 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
+# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -566,10 +553,7 @@ CONFIG_INPUT=y
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
@@ -587,21 +571,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
@@ -609,7 +585,7 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=y
+# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
@@ -629,11 +605,12 @@ CONFIG_MOXA_SMARTIO_NEW=y
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_TXX9=y
CONFIG_HAS_TXX9_SERIAL=y
CONFIG_SERIAL_TXX9_NR_UARTS=6
-# CONFIG_SERIAL_TXX9_CONSOLE is not set
-# CONFIG_SERIAL_TXX9_STDSERIAL is not set
+CONFIG_SERIAL_TXX9_CONSOLE=y
+CONFIG_SERIAL_TXX9_STDSERIAL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
@@ -685,6 +662,11 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HWMON_VID is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -697,51 +679,8 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
#
# Sound
@@ -864,7 +803,7 @@ CONFIG_INOTIFY_USER=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -889,14 +828,13 @@ CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
@@ -944,10 +882,7 @@ CONFIG_MSDOS_PARTITION=y
#
# Distributed Lock Manager
#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
#
# Profiling support
@@ -972,65 +907,22 @@ CONFIG_CMDLINE=""
#
# Security options
#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig
deleted file mode 100644
index 3d6c2d74350..00000000000
--- a/arch/mips/configs/pnx8550-v2pci_defconfig
+++ /dev/null
@@ -1,1540 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:39 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PNX8550=y
-CONFIG_SOC_PNX8550=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=m
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PNX8XXX=y
-CONFIG_SERIAL_PNX8XXX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_DES is not set
-CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/gt64120/wrppmc/pci.c b/arch/mips/gt64120/wrppmc/pci.c
index 2fbe93467f7..0d5289bc180 100644
--- a/arch/mips/gt64120/wrppmc/pci.c
+++ b/arch/mips/gt64120/wrppmc/pci.c
@@ -13,7 +13,7 @@
#include <linux/kernel.h>
#include <asm/gt64120.h>
-extern struct pci_ops gt64120_pci_ops;
+extern struct pci_ops gt64xxx_pci0_ops;
static struct resource pci0_io_resource = {
.name = "pci_0 io",
@@ -30,7 +30,7 @@ static struct resource pci0_mem_resource = {
};
static struct pci_controller hose_0 = {
- .pci_ops = &gt64120_pci_ops,
+ .pci_ops = &gt64xxx_pci0_ops,
.io_resource = &pci0_io_resource,
.mem_resource = &pci0_mem_resource,
};
diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/jmr3927/common/prom.c
index aa481b774c4..5398813e50e 100644
--- a/arch/mips/jmr3927/common/prom.c
+++ b/arch/mips/jmr3927/common/prom.c
@@ -41,16 +41,6 @@
#include <asm/bootinfo.h>
-extern int prom_argc;
-extern char **prom_argv, **prom_envp;
-
-typedef struct
-{
- char *name;
-/* char *val; */
-}t_env_var;
-
-
char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
@@ -60,6 +50,8 @@ void __init prom_init_cmdline(void)
{
char *cp;
int actr;
+ int prom_argc = fw_arg0;
+ char **prom_argv = (char **) fw_arg1;
actr = 1; /* Always ignore argv[0] */
diff --git a/arch/mips/jmr3927/common/puts.c b/arch/mips/jmr3927/common/puts.c
index 1c1cad9cd07..c611ab49788 100644
--- a/arch/mips/jmr3927/common/puts.c
+++ b/arch/mips/jmr3927/common/puts.c
@@ -32,137 +32,29 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/types.h>
-#include <asm/jmr3927/txx927.h>
#include <asm/jmr3927/tx3927.h>
-#include <asm/jmr3927/jmr3927.h>
#define TIMEOUT 0xffffff
-#define SLOW_DOWN
-
-static const char digits[16] = "0123456789abcdef";
-
-#ifdef SLOW_DOWN
-#define slow_down() { int k; for (k=0; k<10000; k++); }
-#else
-#define slow_down()
-#endif
void
-putch(const unsigned char c)
+prom_putchar(char c)
{
int i = 0;
do {
- slow_down();
i++;
- if (i>TIMEOUT) {
+ if (i>TIMEOUT)
break;
- }
} while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
tx3927_sioptr(1)->tfifo = c;
return;
}
-unsigned char getch(void)
-{
- int i = 0;
- int dicr;
- char c;
-
- /* diable RX int. */
- dicr = tx3927_sioptr(1)->dicr;
- tx3927_sioptr(1)->dicr = 0;
-
- do {
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (tx3927_sioptr(1)->disr & TXx927_SIDISR_UVALID)
- ;
- c = tx3927_sioptr(1)->rfifo;
-
- /* clear RX int. status */
- tx3927_sioptr(1)->disr &= ~TXx927_SIDISR_RDIS;
- /* enable RX int. */
- tx3927_sioptr(1)->dicr = dicr;
-
- return c;
-}
-void
-do_jmr3927_led_set(char n)
-{
- /* and with current leds */
- jmr3927_led_and_set(n);
-}
-
void
-puts(unsigned char *cp)
+puts(const char *cp)
{
- int i = 0;
-
- while (*cp) {
- do {
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
- tx3927_sioptr(1)->tfifo = *cp++;
- }
- putch('\r');
- putch('\n');
-}
-
-void
-fputs(unsigned char *cp)
-{
- int i = 0;
-
- while (*cp) {
- do {
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
- tx3927_sioptr(1)->tfifo = *cp++;
- }
-}
-
-
-void
-put64(uint64_t ul)
-{
- int cnt;
- unsigned ch;
-
- cnt = 16; /* 16 nibbles in a 64 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char)(ul >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
-
-void
-put32(unsigned u)
-{
- int cnt;
- unsigned ch;
-
- cnt = 8; /* 8 nibbles in a 32 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char)(u >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
+ while (*cp)
+ prom_putchar(*cp++);
+ prom_putchar('\r');
+ prom_putchar('\n');
}
diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile
index 18fe9a898cb..8d00ba460ce 100644
--- a/arch/mips/jmr3927/rbhma3100/Makefile
+++ b/arch/mips/jmr3927/rbhma3100/Makefile
@@ -3,5 +3,4 @@
#
obj-y += init.o irq.o setup.o
-obj-$(CONFIG_RUNTIME_DEBUG) += debug.o
obj-$(CONFIG_KGDB) += kgdb_io.o
diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/jmr3927/rbhma3100/init.c
index a55cb4572de..9169fab1773 100644
--- a/arch/mips/jmr3927/rbhma3100/init.c
+++ b/arch/mips/jmr3927/rbhma3100/init.c
@@ -28,20 +28,10 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
#include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
#include <asm/jmr3927/jmr3927.h>
-int prom_argc;
-char **prom_argv, **prom_envp;
extern void __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-unsigned long mips_nofpu = 0;
const char *get_system_type(void)
{
@@ -52,7 +42,7 @@ const char *get_system_type(void)
;
}
-extern void puts(unsigned char *cp);
+extern void puts(const char *cp);
void __init prom_init(void)
{
@@ -61,10 +51,6 @@ void __init prom_init(void)
if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
puts("Warning: TX3927 TLB off\n");
#endif
- prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
-
mips_machgroup = MACH_GROUP_TOSHIBA;
#ifdef CONFIG_TOSHIBA_JMR3927
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
index 7d2c203cb40..1187b44a3dd 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/jmr3927/rbhma3100/irq.c
@@ -30,53 +30,21 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
-
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/bitops.h>
-#include <asm/irq_regs.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
-#include <asm/ptrace.h>
#include <asm/processor.h>
-#include <asm/jmr3927/irq.h>
-#include <asm/debug.h>
#include <asm/jmr3927/jmr3927.h>
#if JMR3927_IRQ_END > NR_IRQS
#error JMR3927_IRQ_END > NR_IRQS
#endif
-struct tb_irq_space* tb_irq_spaces;
-
-static int jmr3927_irq_base = -1;
-
-#ifdef CONFIG_PCI
-static int jmr3927_gen_iack(void)
-{
- /* generate ACK cycle */
-#ifdef __BIG_ENDIAN
- return (tx3927_pcicptr->iiadp >> 24) & 0xff;
-#else
- return tx3927_pcicptr->iiadp & 0xff;
-#endif
-}
-#endif
-
#define irc_dlevel 0
#define irc_elevel 1
@@ -87,89 +55,24 @@ static unsigned char irc_level[TX3927_NUM_IR] = {
6, 6, 6 /* TMR */
};
-static void jmr3927_irq_disable(unsigned int irq_nr);
-static void jmr3927_irq_enable(unsigned int irq_nr);
-
-static void jmr3927_irq_ack(unsigned int irq)
-{
- if (irq == JMR3927_IRQ_IRC_TMR0)
- jmr3927_tmrptr->tisr = 0; /* ack interrupt */
-
- jmr3927_irq_disable(irq);
-}
-
-static void jmr3927_irq_end(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- jmr3927_irq_enable(irq);
-}
-
-static void jmr3927_irq_disable(unsigned int irq_nr)
-{
- struct tb_irq_space* sp;
-
- for (sp = tb_irq_spaces; sp; sp = sp->next) {
- if (sp->start_irqno <= irq_nr &&
- irq_nr < sp->start_irqno + sp->nr_irqs) {
- if (sp->mask_func)
- sp->mask_func(irq_nr - sp->start_irqno,
- sp->space_id);
- break;
- }
- }
-}
-
-static void jmr3927_irq_enable(unsigned int irq_nr)
-{
- struct tb_irq_space* sp;
-
- for (sp = tb_irq_spaces; sp; sp = sp->next) {
- if (sp->start_irqno <= irq_nr &&
- irq_nr < sp->start_irqno + sp->nr_irqs) {
- if (sp->unmask_func)
- sp->unmask_func(irq_nr - sp->start_irqno,
- sp->space_id);
- break;
- }
- }
-}
-
/*
* CP0_STATUS is a thread's resource (saved/restored on context switch).
- * So disable_irq/enable_irq MUST handle IOC/ISAC/IRC registers.
+ * So disable_irq/enable_irq MUST handle IOC/IRC registers.
*/
-static void mask_irq_isac(int irq_nr, int space_id)
-{
- /* 0: mask */
- unsigned char imask =
- jmr3927_isac_reg_in(JMR3927_ISAC_INTM_ADDR);
- unsigned int bit = 1 << irq_nr;
- jmr3927_isac_reg_out(imask & ~bit, JMR3927_ISAC_INTM_ADDR);
- /* flush write buffer */
- (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
-}
-static void unmask_irq_isac(int irq_nr, int space_id)
-{
- /* 0: mask */
- unsigned char imask = jmr3927_isac_reg_in(JMR3927_ISAC_INTM_ADDR);
- unsigned int bit = 1 << irq_nr;
- jmr3927_isac_reg_out(imask | bit, JMR3927_ISAC_INTM_ADDR);
- /* flush write buffer */
- (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
-}
-
-static void mask_irq_ioc(int irq_nr, int space_id)
+static void mask_irq_ioc(unsigned int irq)
{
/* 0: mask */
+ unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
unsigned int bit = 1 << irq_nr;
jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR);
/* flush write buffer */
(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
}
-static void unmask_irq_ioc(int irq_nr, int space_id)
+static void unmask_irq_ioc(unsigned int irq)
{
/* 0: mask */
+ unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
unsigned int bit = 1 << irq_nr;
jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR);
@@ -177,8 +80,9 @@ static void unmask_irq_ioc(int irq_nr, int space_id)
(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
}
-static void mask_irq_irc(int irq_nr, int space_id)
+static void mask_irq_irc(unsigned int irq)
{
+ unsigned int irq_nr = irq - JMR3927_IRQ_IRC;
volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2];
if (irq_nr & 1)
*ilrp = (*ilrp & 0x00ff) | (irc_dlevel << 8);
@@ -191,8 +95,9 @@ static void mask_irq_irc(int irq_nr, int space_id)
(void)tx3927_ircptr->ssr;
}
-static void unmask_irq_irc(int irq_nr, int space_id)
+static void unmask_irq_irc(unsigned int irq)
{
+ unsigned int irq_nr = irq - JMR3927_IRQ_IRC;
volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2];
if (irq_nr & 1)
*ilrp = (*ilrp & 0x00ff) | (irc_level[irq_nr] << 8);
@@ -203,98 +108,14 @@ static void unmask_irq_irc(int irq_nr, int space_id)
tx3927_ircptr->imr = irc_elevel;
}
-struct tb_irq_space jmr3927_isac_irqspace = {
- .next = NULL,
- .start_irqno = JMR3927_IRQ_ISAC,
- nr_irqs : JMR3927_NR_IRQ_ISAC,
- .mask_func = mask_irq_isac,
- .unmask_func = unmask_irq_isac,
- .name = "ISAC",
- .space_id = 0,
- can_share : 0
-};
-struct tb_irq_space jmr3927_ioc_irqspace = {
- .next = NULL,
- .start_irqno = JMR3927_IRQ_IOC,
- nr_irqs : JMR3927_NR_IRQ_IOC,
- .mask_func = mask_irq_ioc,
- .unmask_func = unmask_irq_ioc,
- .name = "IOC",
- .space_id = 0,
- can_share : 1
-};
-
-struct tb_irq_space jmr3927_irc_irqspace = {
- .next = NULL,
- .start_irqno = JMR3927_IRQ_IRC,
- .nr_irqs = JMR3927_NR_IRQ_IRC,
- .mask_func = mask_irq_irc,
- .unmask_func = unmask_irq_irc,
- .name = "on-chip",
- .space_id = 0,
- .can_share = 0
-};
-
-
-#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND
-static int tx_branch_likely_bug_count = 0;
-static int have_tx_branch_likely_bug = 0;
-
-static void tx_branch_likely_bug_fixup(void)
-{
- struct pt_regs *regs = get_irq_regs();
-
- /* TX39/49-BUG: Under this condition, the insn in delay slot
- of the branch likely insn is executed (not nullified) even
- the branch condition is false. */
- if (!have_tx_branch_likely_bug)
- return;
- if ((regs->cp0_epc & 0xfff) == 0xffc &&
- KSEGX(regs->cp0_epc) != KSEG0 &&
- KSEGX(regs->cp0_epc) != KSEG1) {
- unsigned int insn = *(unsigned int*)(regs->cp0_epc - 4);
- /* beql,bnel,blezl,bgtzl */
- /* bltzl,bgezl,blezall,bgezall */
- /* bczfl, bcztl */
- if ((insn & 0xf0000000) == 0x50000000 ||
- (insn & 0xfc0e0000) == 0x04020000 ||
- (insn & 0xf3fe0000) == 0x41020000) {
- regs->cp0_epc -= 4;
- tx_branch_likely_bug_count++;
- printk(KERN_INFO
- "fix branch-likery bug in %s (insn %08x)\n",
- current->comm, insn);
- }
- }
-}
-#endif
-
-static void jmr3927_spurious(void)
-{
- struct pt_regs * regs = get_irq_regs();
-
-#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND
- tx_branch_likely_bug_fixup();
-#endif
- printk(KERN_WARNING "spurious interrupt (cause 0x%lx, pc 0x%lx, ra 0x%lx).\n",
- regs->cp0_cause, regs->cp0_epc, regs->regs[31]);
-}
-
asmlinkage void plat_irq_dispatch(void)
{
- struct pt_regs * regs = get_irq_regs();
+ unsigned long cp0_cause = read_c0_cause();
int irq;
-#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND
- tx_branch_likely_bug_fixup();
-#endif
- if ((regs->cp0_cause & CAUSEF_IP7) == 0) {
-#if 0
- jmr3927_spurious();
-#endif
+ if ((cp0_cause & CAUSEF_IP7) == 0)
return;
- }
- irq = (regs->cp0_cause >> CAUSEB_IP2) & 0x0f;
+ irq = (cp0_cause >> CAUSEB_IP2) & 0x0f;
do_IRQ(irq + JMR3927_IRQ_IRC);
}
@@ -317,35 +138,6 @@ static struct irqaction ioc_action = {
jmr3927_ioc_interrupt, 0, CPU_MASK_NONE, "IOC", NULL, NULL,
};
-static irqreturn_t jmr3927_isac_interrupt(int irq, void *dev_id)
-{
- unsigned char istat = jmr3927_isac_reg_in(JMR3927_ISAC_INTS2_ADDR);
- int i;
-
- for (i = 0; i < JMR3927_NR_IRQ_ISAC; i++) {
- if (istat & (1 << i)) {
- irq = JMR3927_IRQ_ISAC + i;
- do_IRQ(irq);
- }
- }
- return IRQ_HANDLED;
-}
-
-static struct irqaction isac_action = {
- jmr3927_isac_interrupt, 0, CPU_MASK_NONE, "ISAC", NULL, NULL,
-};
-
-
-static irqreturn_t jmr3927_isaerr_interrupt(int irq, void *dev_id)
-{
- printk(KERN_WARNING "ISA error interrupt (irq 0x%x).\n", irq);
-
- return IRQ_HANDLED;
-}
-static struct irqaction isaerr_action = {
- jmr3927_isaerr_interrupt, 0, CPU_MASK_NONE, "ISA error", NULL, NULL,
-};
-
static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
{
printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
@@ -358,54 +150,19 @@ static struct irqaction pcierr_action = {
jmr3927_pcierr_interrupt, 0, CPU_MASK_NONE, "PCI error", NULL, NULL,
};
-int jmr3927_ether1_irq = 0;
-
-void jmr3927_irq_init(u32 irq_base);
+static void __init jmr3927_irq_init(void);
void __init arch_init_irq(void)
{
- /* look for io board's presence */
- int have_isac = jmr3927_have_isac();
-
/* Now, interrupt control disabled, */
/* all IRC interrupts are masked, */
/* all IRC interrupt mode are Low Active. */
- if (have_isac) {
-
- /* ETHER1 (NE2000 compatible 10M-Ether) parameter setup */
- /* temporary enable interrupt control */
- tx3927_ircptr->cer = 1;
- /* ETHER1 Int. Is High-Active. */
- if (tx3927_ircptr->ssr & (1 << 0))
- jmr3927_ether1_irq = JMR3927_IRQ_IRC_INT0;
-#if 0 /* INT3 may be asserted by ether0 (even after reboot...) */
- else if (tx3927_ircptr->ssr & (1 << 3))
- jmr3927_ether1_irq = JMR3927_IRQ_IRC_INT3;
-#endif
- /* disable interrupt control */
- tx3927_ircptr->cer = 0;
-
- /* Ether1: High Active */
- if (jmr3927_ether1_irq) {
- int ether1_irc = jmr3927_ether1_irq - JMR3927_IRQ_IRC;
- tx3927_ircptr->cr[ether1_irc / 8] |=
- TX3927_IRCR_HIGH << ((ether1_irc % 8) * 2);
- }
- }
-
/* mask all IOC interrupts */
jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR);
/* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */
jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR);
- if (have_isac) {
- /* mask all ISAC interrupts */
- jmr3927_isac_reg_out(0, JMR3927_ISAC_INTM_ADDR);
- /* setup ISAC interrupt mode (ISAIRQ3,ISAIRQ5:Low Active ???) */
- jmr3927_isac_reg_out(JMR3927_ISAC_INTF_IRQ3|JMR3927_ISAC_INTF_IRQ5, JMR3927_ISAC_INTP_ADDR);
- }
-
/* clear PCI Soft interrupts */
jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR);
/* clear PCI Reset interrupts */
@@ -415,21 +172,11 @@ void __init arch_init_irq(void)
tx3927_ircptr->cer = TX3927_IRCER_ICE;
tx3927_ircptr->imr = irc_elevel;
- jmr3927_irq_init(NR_ISA_IRQS);
-
- /* setup irq space */
- add_tb_irq_space(&jmr3927_isac_irqspace);
- add_tb_irq_space(&jmr3927_ioc_irqspace);
- add_tb_irq_space(&jmr3927_irc_irqspace);
+ jmr3927_irq_init();
/* setup IOC interrupt 1 (PCI, MODEM) */
setup_irq(JMR3927_IRQ_IOCINT, &ioc_action);
- if (have_isac) {
- setup_irq(JMR3927_IRQ_ISACINT, &isac_action);
- setup_irq(JMR3927_IRQ_ISAC_ISAER, &isaerr_action);
- }
-
#ifdef CONFIG_PCI
setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
#endif
@@ -438,21 +185,28 @@ void __init arch_init_irq(void)
set_c0_status(ST0_IM); /* IE bit is still 0. */
}
-static struct irq_chip jmr3927_irq_controller = {
- .name = "jmr3927_irq",
- .ack = jmr3927_irq_ack,
- .mask = jmr3927_irq_disable,
- .mask_ack = jmr3927_irq_ack,
- .unmask = jmr3927_irq_enable,
- .end = jmr3927_irq_end,
+static struct irq_chip jmr3927_irq_ioc = {
+ .name = "jmr3927_ioc",
+ .ack = mask_irq_ioc,
+ .mask = mask_irq_ioc,
+ .mask_ack = mask_irq_ioc,
+ .unmask = unmask_irq_ioc,
};
-void jmr3927_irq_init(u32 irq_base)
+static struct irq_chip jmr3927_irq_irc = {
+ .name = "jmr3927_irc",
+ .ack = mask_irq_irc,
+ .mask = mask_irq_irc,
+ .mask_ack = mask_irq_irc,
+ .unmask = unmask_irq_irc,
+};
+
+static void __init jmr3927_irq_init(void)
{
u32 i;
- for (i= irq_base; i< irq_base + JMR3927_NR_IRQ_IRC + JMR3927_NR_IRQ_IOC; i++)
- set_irq_chip(i, &jmr3927_irq_controller);
-
- jmr3927_irq_base = irq_base;
+ for (i = JMR3927_IRQ_IRC; i < JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC; i++)
+ set_irq_chip_and_handler(i, &jmr3927_irq_irc, handle_level_irq);
+ for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+ set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
}
diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/jmr3927/rbhma3100/kgdb_io.c
index 269a42deae0..2604f2c9a96 100644
--- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c
+++ b/arch/mips/jmr3927/rbhma3100/kgdb_io.c
@@ -31,23 +31,12 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/types.h>
-#include <asm/jmr3927/txx927.h>
-#include <asm/jmr3927/tx3927.h>
#include <asm/jmr3927/jmr3927.h>
#define TIMEOUT 0xffffff
-#define SLOW_DOWN
-
-static const char digits[16] = "0123456789abcdef";
-
-#ifdef SLOW_DOWN
-#define slow_down() { int k; for (k=0; k<10000; k++); }
-#else
-#define slow_down()
-#endif
static int remoteDebugInitialized = 0;
+static void debugInit(int baud)
int putDebugChar(unsigned char c)
{
@@ -103,20 +92,8 @@ unsigned char getDebugChar(void)
return c;
}
-void debugInit(int baud)
+static void debugInit(int baud)
{
- /*
- volatile unsigned long lcr;
- volatile unsigned long dicr;
- volatile unsigned long disr;
- volatile unsigned long cisr;
- volatile unsigned long fcr;
- volatile unsigned long flcr;
- volatile unsigned long bgr;
- volatile unsigned long tfifo;
- volatile unsigned long rfifo;
- */
-
tx3927_sioptr(0)->lcr = 0x020;
tx3927_sioptr(0)->dicr = 0;
tx3927_sioptr(0)->disr = 0x4100;
@@ -125,31 +102,4 @@ void debugInit(int baud)
tx3927_sioptr(0)->flcr = 0x02;
tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
TXx927_SIBGR_BCLK_T0;
-#if 0
- /*
- * Reset the UART.
- */
- tx3927_sioptr(0)->fcr = TXx927_SIFCR_SWRST;
- while (tx3927_sioptr(0)->fcr & TXx927_SIFCR_SWRST)
- ;
-
- /*
- * and set the speed of the serial port
- * (currently hardwired to 9600 8N1
- */
-
- tx3927_sioptr(0)->lcr = TXx927_SILCR_UMODE_8BIT |
- TXx927_SILCR_USBL_1BIT |
- TXx927_SILCR_SCS_IMCLK_BG;
- tx3927_sioptr(0)->bgr =
- ((JMR3927_BASE_BAUD + baud / 2) / baud) |
- TXx927_SIBGR_BCLK_T0;
-
- /* HW RTS/CTS control */
- if (ser->flags & ASYNC_HAVE_CTS_LINE)
- tx3927_sioptr(0)->flcr = TXx927_SIFLCR_RCS | TXx927_SIFLCR_TES |
- TXx927_SIFLCR_RTSTL_MAX /* 15 */;
- /* Enable RX/TX */
- tx3927_sioptr(0)->flcr &= ~(TXx927_SIFLCR_RSDE | TXx927_SIFLCR_TSDE);
-#endif
}
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index fc523bda068..d1ef2895d56 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -54,87 +54,18 @@
#include <asm/addrspace.h>
#include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
#include <asm/jmr3927/jmr3927.h>
#include <asm/mipsregs.h>
-#include <asm/traps.h>
-extern void puts(unsigned char *cp);
+extern void puts(const char *cp);
/* Tick Timer divider */
#define JMR3927_TIMER_CCD 0 /* 1/2 */
#define JMR3927_TIMER_CLK (JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD))
-unsigned char led_state = 0xf;
-
-struct {
- struct resource ram0;
- struct resource ram1;
- struct resource pcimem;
- struct resource iob;
- struct resource ioc;
- struct resource pciio;
- struct resource jmy1394;
- struct resource rom1;
- struct resource rom0;
- struct resource sio0;
- struct resource sio1;
-} jmr3927_resources = {
- {
- .start = 0,
- .end = 0x01FFFFFF,
- .name = "RAM0",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x02000000,
- .end = 0x03FFFFFF,
- .name = "RAM1",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x08000000,
- .end = 0x07FFFFFF,
- .name = "PCIMEM",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x10000000,
- .end = 0x13FFFFFF,
- .name = "IOB"
- }, {
- .start = 0x14000000,
- .end = 0x14FFFFFF,
- .name = "IOC"
- }, {
- .start = 0x15000000,
- .end = 0x15FFFFFF,
- .name = "PCIIO"
- }, {
- .start = 0x1D000000,
- .end = 0x1D3FFFFF,
- .name = "JMY1394"
- }, {
- .start = 0x1E000000,
- .end = 0x1E3FFFFF,
- .name = "ROM1"
- }, {
- .start = 0x1FC00000,
- .end = 0x1FFFFFFF,
- .name = "ROM0"
- }, {
- .start = 0xFFFEF300,
- .end = 0xFFFEF3FF,
- .name = "SIO0"
- }, {
- .start = 0xFFFEF400,
- .end = 0xFFFEF4FF,
- .name = "SIO1"
- },
-};
-
/* don't enable - see errata */
-int jmr3927_ccfg_toeon = 0;
+static int jmr3927_ccfg_toeon;
static inline void do_reset(void)
{
@@ -173,9 +104,15 @@ static cycle_t jmr3927_hpt_read(void)
return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr;
}
+static void jmr3927_timer_ack(void)
+{
+ jmr3927_tmrptr->tisr = 0; /* ack interrupt */
+}
+
static void __init jmr3927_time_init(void)
{
clocksource_mips.read = jmr3927_hpt_read;
+ mips_timer_ack = jmr3927_timer_ack;
mips_hpt_frequency = JMR3927_TIMER_CLK;
}
@@ -190,9 +127,6 @@ void __init plat_timer_setup(struct irqaction *irq)
setup_irq(JMR3927_IRQ_TICK, irq);
}
-#define USECS_PER_JIFFY (1000000/HZ)
-
-//#undef DO_WRITE_THROUGH
#define DO_WRITE_THROUGH
#define DO_ENABLE_CACHE
@@ -224,12 +158,6 @@ void __init plat_mem_setup(void)
/* Reboot on panic */
panic_timeout = 180;
- {
- unsigned int conf;
- conf = read_c0_conf();
- }
-
-#if 1
/* cache setup */
{
unsigned int conf;
@@ -256,16 +184,14 @@ void __init plat_mem_setup(void)
write_c0_conf(conf);
write_c0_cache(0);
}
-#endif
/* initialize board */
jmr3927_board_init();
argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "toeon")) != NULL) {
- jmr3927_ccfg_toeon = 1;
- }
+ if ((argptr = strstr(argptr, "toeon")) != NULL)
+ jmr3927_ccfg_toeon = 1;
argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "ip=")) == NULL) {
argptr = prom_getcmdline();
@@ -281,7 +207,7 @@ void __init plat_mem_setup(void)
memset(&req, 0, sizeof(req));
req.line = i;
req.iotype = UPIO_MEM;
- req.membase = (char *)TX3927_SIO_REG(i);
+ req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
req.mapbase = TX3927_SIO_REG(i);
req.irq = i == 0 ?
JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
@@ -303,65 +229,33 @@ void __init plat_mem_setup(void)
static void tx3927_setup(void);
-#ifdef CONFIG_PCI
-unsigned long mips_pci_io_base;
-unsigned long mips_pci_io_size;
-unsigned long mips_pci_mem_base;
-unsigned long mips_pci_mem_size;
-/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-unsigned long mips_pci_io_pciaddr = 0;
-#endif
-
static void __init jmr3927_board_init(void)
{
- char *argptr;
-
-#ifdef CONFIG_PCI
- mips_pci_io_base = JMR3927_PCIIO;
- mips_pci_io_size = JMR3927_PCIIO_SIZE;
- mips_pci_mem_base = JMR3927_PCIMEM;
- mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
-#endif
-
tx3927_setup();
- if (jmr3927_have_isac()) {
-
-#ifdef CONFIG_FB_E1355
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " video=e1355fb:crt16h");
- }
-#endif
-
-#ifdef CONFIG_BLK_DEV_IDE
- /* overrides PCI-IDE */
-#endif
- }
-
/* SIO0 DTR on */
jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
jmr3927_led_set(0);
-
- if (jmr3927_have_isac())
- jmr3927_io_led_set(0);
printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
jmr3927_dipsw1(), jmr3927_dipsw2(),
jmr3927_dipsw3(), jmr3927_dipsw4());
- if (jmr3927_have_isac())
- printk("JMI-3927IO2 --- ISAC(Rev %d) DIPSW:%01x\n",
- jmr3927_isac_reg_in(JMR3927_ISAC_REV_ADDR) & JMR3927_REV_MASK,
- jmr3927_io_dipsw());
}
-void __init tx3927_setup(void)
+static void __init tx3927_setup(void)
{
int i;
+#ifdef CONFIG_PCI
+ unsigned long mips_pci_io_base = JMR3927_PCIIO;
+ unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE;
+ unsigned long mips_pci_mem_base = JMR3927_PCIMEM;
+ unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
+ /* for legacy I/O, PCI I/O PCI Bus address must be 0 */
+ unsigned long mips_pci_io_pciaddr = 0;
+#endif
/* SDRAMC are configured by PROM */
@@ -475,10 +369,8 @@ void __init tx3927_setup(void)
tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
tx3927_pcicptr->mba = 0;
tx3927_pcicptr->tlbmma = 0;
-#ifndef JMR3927_INIT_INDIRECT_PCI
/* Enable Direct mapping Address Space Decoder */
tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
-#endif
/* Clear All Local Bus Status */
tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
@@ -491,22 +383,15 @@ void __init tx3927_setup(void)
/* PCIC Int => IRC IRQ10 */
tx3927_pcicptr->il = TX3927_IR_PCI;
-#if 1
/* Target Control (per errata) */
tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
-#endif
/* Enable Bus Arbiter */
-#if 0
- tx3927_pcicptr->req_trace = 0x73737373;
-#endif
tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY |
-#if 1
PCI_COMMAND_IO |
-#endif
PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
}
#endif /* CONFIG_PCI */
@@ -555,8 +440,6 @@ static int __init jmr3927_rtc_init(void)
.flags = IORESOURCE_MEM,
};
struct platform_device *dev;
- if (!jmr3927_have_nvram())
- return -ENODEV;
dev = platform_device_register_simple("ds1742", -1, &res, 1);
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 222de465db7..761a779d5c4 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -102,7 +102,6 @@ void output_thread_info_defines(void)
offset("#define TI_ADDR_LIMIT ", struct thread_info, addr_limit);
offset("#define TI_RESTART_BLOCK ", struct thread_info, restart_block);
offset("#define TI_REGS ", struct thread_info, regs);
- constant("#define _THREAD_SIZE_ORDER ", THREAD_SIZE_ORDER);
constant("#define _THREAD_SIZE ", THREAD_SIZE);
constant("#define _THREAD_MASK ", THREAD_MASK);
linefeed;
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 9c79703979b..2345160e63f 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -328,8 +328,8 @@ void __init init_i8259_irqs (void)
{
int i;
- request_resource(&ioport_resource, &pic1_io_resource);
- request_resource(&ioport_resource, &pic2_io_resource);
+ insert_resource(&ioport_resource, &pic1_io_resource);
+ insert_resource(&ioport_resource, &pic2_io_resource);
init_8259A(0);
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index 29eadd404fa..c6580018c94 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -17,6 +17,7 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/unistd.h>
#include <linux/file.h>
#include <linux/fs.h>
@@ -198,7 +199,6 @@ void sp_work_handle_request(void)
int cmd;
char *vcwd;
- mm_segment_t old_fs;
int size;
ret.retval = -1;
@@ -241,8 +241,6 @@ void sp_work_handle_request(void)
if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
(int)&tz, 0,0)) == 0)
ret.retval = tv.tv_sec;
-
- ret.errno = errno;
break;
case MTSP_SYSCALL_EXIT:
@@ -279,7 +277,6 @@ void sp_work_handle_request(void)
if (cmd >= 0) {
ret.retval = sp_syscall(cmd, generic.arg0, generic.arg1,
generic.arg2, generic.arg3);
- ret.errno = errno;
} else
printk(KERN_WARNING
"KSPD: Unknown SP syscall number %d\n", sc.cmd);
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 28c2e2e6af7..656bde2e11b 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -49,7 +49,8 @@ LEAF(resume)
#ifndef CONFIG_CPU_HAS_LLSC
sw zero, ll_bit
#endif
- mfc0 t2, CP0_STATUS
+ mfc0 t1, CP0_STATUS
+ sw t1, THREAD_STATUS(a0)
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
@@ -59,8 +60,8 @@ LEAF(resume)
lw t3, TASK_THREAD_INFO(a0)
lw t0, TI_FLAGS(t3)
li t1, _TIF_USEDFPU
- and t1, t0
- beqz t1, 1f
+ and t2, t0, t1
+ beqz t2, 1f
nor t1, zero, t1
and t0, t0, t1
@@ -73,13 +74,10 @@ LEAF(resume)
li t1, ~ST0_CU1
and t0, t0, t1
sw t0, ST_OFF(t3)
- /* clear thread_struct CU1 bit */
- and t2, t1
fpu_save_single a0, t0 # clobbers t0
1:
- sw t2, THREAD_STATUS(a0)
/*
* The order of restoring the registers takes care of the race
* updating $28, $29 and kernelsp without disabling ints.
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index c7698fd9955..cc566cf1224 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -48,7 +48,8 @@
#ifndef CONFIG_CPU_HAS_LLSC
sw zero, ll_bit
#endif
- mfc0 t2, CP0_STATUS
+ mfc0 t1, CP0_STATUS
+ LONG_S t1, THREAD_STATUS(a0)
cpu_save_nonscratch a0
LONG_S ra, THREAD_REG31(a0)
@@ -58,8 +59,8 @@
PTR_L t3, TASK_THREAD_INFO(a0)
LONG_L t0, TI_FLAGS(t3)
li t1, _TIF_USEDFPU
- and t1, t0
- beqz t1, 1f
+ and t2, t0, t1
+ beqz t2, 1f
nor t1, zero, t1
and t0, t0, t1
@@ -72,13 +73,10 @@
li t1, ~ST0_CU1
and t0, t0, t1
LONG_S t0, ST_OFF(t3)
- /* clear thread_struct CU1 bit */
- and t2, t1
fpu_save_double a0 t0 t1 # c0_status passed in t0
# clobbers t1
1:
- LONG_S t2, THREAD_STATUS(a0)
/*
* The order of restoring the registers takes care of the race
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index e6e3047151a..bfc8ca168f8 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -289,7 +289,7 @@ unsigned int rtlx_write_poll(int index)
return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size);
}
-ssize_t rtlx_read(int index, void __user *buff, size_t count, int user)
+ssize_t rtlx_read(int index, void __user *buff, size_t count)
{
size_t lx_write, fl = 0L;
struct rtlx_channel *lx;
@@ -331,9 +331,10 @@ out:
return count;
}
-ssize_t rtlx_write(int index, const void __user *buffer, size_t count, int user)
+ssize_t rtlx_write(int index, const void __user *buffer, size_t count)
{
struct rtlx_channel *rt;
+ unsigned long failed;
size_t rt_read;
size_t fl;
@@ -363,7 +364,7 @@ ssize_t rtlx_write(int index, const void __user *buffer, size_t count, int user)
}
out:
- count -= cailed;
+ count -= failed;
smp_wmb();
rt->rt_write = (rt->rt_write + count) % rt->buffer_size;
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index 297dfcb9752..c0faabd5201 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -34,4 +34,13 @@ extern int install_sigtramp(unsigned int __user *tramp, unsigned int syscall);
/* Check and clear pending FPU exceptions in saved CSR */
extern int fpcsr_pending(unsigned int __user *fpcsr);
+/* Make sure we will not lose FPU ownership */
+#ifdef CONFIG_PREEMPT
+#define lock_fpu_owner() preempt_disable()
+#define unlock_fpu_owner() preempt_enable()
+#else
+#define lock_fpu_owner() pagefault_disable()
+#define unlock_fpu_owner() pagefault_enable()
+#endif
+
#endif /* __SIGNAL_COMMON_H */
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 8c3c5a5789b..07d67309451 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -20,6 +20,7 @@
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/compiler.h>
+#include <linux/uaccess.h>
#include <asm/abi.h>
#include <asm/asm.h>
@@ -27,7 +28,6 @@
#include <asm/cacheflush.h>
#include <asm/fpu.h>
#include <asm/sim.h>
-#include <asm/uaccess.h>
#include <asm/ucontext.h>
#include <asm/cpu-features.h>
#include <asm/war.h>
@@ -78,6 +78,46 @@ struct rt_sigframe {
/*
* Helper routines
*/
+static int protected_save_fp_context(struct sigcontext __user *sc)
+{
+ int err;
+ while (1) {
+ lock_fpu_owner();
+ own_fpu_inatomic(1);
+ err = save_fp_context(sc); /* this might fail */
+ unlock_fpu_owner();
+ if (likely(!err))
+ break;
+ /* touch the sigcontext and try again */
+ err = __put_user(0, &sc->sc_fpregs[0]) |
+ __put_user(0, &sc->sc_fpregs[31]) |
+ __put_user(0, &sc->sc_fpc_csr);
+ if (err)
+ break; /* really bad sigcontext */
+ }
+ return err;
+}
+
+static int protected_restore_fp_context(struct sigcontext __user *sc)
+{
+ int err, tmp;
+ while (1) {
+ lock_fpu_owner();
+ own_fpu_inatomic(0);
+ err = restore_fp_context(sc); /* this might fail */
+ unlock_fpu_owner();
+ if (likely(!err))
+ break;
+ /* touch the sigcontext and try again */
+ err = __get_user(tmp, &sc->sc_fpregs[0]) |
+ __get_user(tmp, &sc->sc_fpregs[31]) |
+ __get_user(tmp, &sc->sc_fpc_csr);
+ if (err)
+ break; /* really bad sigcontext */
+ }
+ return err;
+}
+
int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
int err = 0;
@@ -113,10 +153,7 @@ int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
* Save FPU state to signal context. Signal handler
* will "inherit" current FPU state.
*/
- own_fpu(1);
- enable_fp_in_kernel();
- err |= save_fp_context(sc);
- disable_fp_in_kernel();
+ err |= protected_save_fp_context(sc);
}
return err;
}
@@ -148,7 +185,7 @@ check_and_restore_fp_context(struct sigcontext __user *sc)
err = sig = fpcsr_pending(&sc->sc_fpc_csr);
if (err > 0)
err = 0;
- err |= restore_fp_context(sc);
+ err |= protected_restore_fp_context(sc);
return err ?: sig;
}
@@ -187,11 +224,8 @@ int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
if (used_math) {
/* restore fpu context if we have used it before */
- own_fpu(0);
- enable_fp_in_kernel();
if (!err)
err = check_and_restore_fp_context(sc);
- disable_fp_in_kernel();
} else {
/* signal handler may have used FPU. Give it up. */
lose_fpu(0);
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 151fd2f0893..b9a014411f8 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -22,6 +22,7 @@
#include <linux/compat.h>
#include <linux/suspend.h>
#include <linux/compiler.h>
+#include <linux/uaccess.h>
#include <asm/abi.h>
#include <asm/asm.h>
@@ -29,7 +30,6 @@
#include <linux/bitops.h>
#include <asm/cacheflush.h>
#include <asm/sim.h>
-#include <asm/uaccess.h>
#include <asm/ucontext.h>
#include <asm/system.h>
#include <asm/fpu.h>
@@ -176,6 +176,46 @@ struct rt_sigframe32 {
/*
* sigcontext handlers
*/
+static int protected_save_fp_context32(struct sigcontext32 __user *sc)
+{
+ int err;
+ while (1) {
+ lock_fpu_owner();
+ own_fpu_inatomic(1);
+ err = save_fp_context32(sc); /* this might fail */
+ unlock_fpu_owner();
+ if (likely(!err))
+ break;
+ /* touch the sigcontext and try again */
+ err = __put_user(0, &sc->sc_fpregs[0]) |
+ __put_user(0, &sc->sc_fpregs[31]) |
+ __put_user(0, &sc->sc_fpc_csr);
+ if (err)
+ break; /* really bad sigcontext */
+ }
+ return err;
+}
+
+static int protected_restore_fp_context32(struct sigcontext32 __user *sc)
+{
+ int err, tmp;
+ while (1) {
+ lock_fpu_owner();
+ own_fpu_inatomic(0);
+ err = restore_fp_context32(sc); /* this might fail */
+ unlock_fpu_owner();
+ if (likely(!err))
+ break;
+ /* touch the sigcontext and try again */
+ err = __get_user(tmp, &sc->sc_fpregs[0]) |
+ __get_user(tmp, &sc->sc_fpregs[31]) |
+ __get_user(tmp, &sc->sc_fpc_csr);
+ if (err)
+ break; /* really bad sigcontext */
+ }
+ return err;
+}
+
static int setup_sigcontext32(struct pt_regs *regs,
struct sigcontext32 __user *sc)
{
@@ -209,10 +249,7 @@ static int setup_sigcontext32(struct pt_regs *regs,
* Save FPU state to signal context. Signal handler
* will "inherit" current FPU state.
*/
- own_fpu(1);
- enable_fp_in_kernel();
- err |= save_fp_context32(sc);
- disable_fp_in_kernel();
+ err |= protected_save_fp_context32(sc);
}
return err;
}
@@ -225,7 +262,7 @@ check_and_restore_fp_context32(struct sigcontext32 __user *sc)
err = sig = fpcsr_pending(&sc->sc_fpc_csr);
if (err > 0)
err = 0;
- err |= restore_fp_context32(sc);
+ err |= protected_restore_fp_context32(sc);
return err ?: sig;
}
@@ -261,11 +298,8 @@ static int restore_sigcontext32(struct pt_regs *regs,
if (used_math) {
/* restore fpu context if we have used it before */
- own_fpu(0);
- enable_fp_in_kernel();
if (!err)
err = check_and_restore_fp_context32(sc);
- disable_fp_in_kernel();
} else {
/* signal handler may have used FPU. Give it up. */
lose_fpu(0);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 7d76a85422b..493cb29b8a4 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -650,7 +650,7 @@ asmlinkage void do_bp(struct pt_regs *regs)
unsigned int opcode, bcode;
siginfo_t info;
- if (get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+ if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
goto out_sigsegv;
/*
@@ -700,7 +700,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
unsigned int opcode, tcode = 0;
siginfo_t info;
- if (get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+ if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
goto out_sigsegv;
/* Immediate versions don't provide a code. */
@@ -757,11 +757,12 @@ asmlinkage void do_cpu(struct pt_regs *regs)
{
unsigned int cpid;
+ die_if_kernel("do_cpu invoked from kernel context!", regs);
+
cpid = (regs->cp0_cause >> CAUSEB_CE) & 3;
switch (cpid) {
case 0:
- die_if_kernel("do_cpu invoked from kernel context!", regs);
if (!cpu_has_llsc)
if (!simulate_llsc(regs))
return;
@@ -772,9 +773,6 @@ asmlinkage void do_cpu(struct pt_regs *regs)
break;
case 1:
- if (!test_thread_flag(TIF_ALLOW_FP_IN_KERNEL))
- die_if_kernel("do_cpu invoked from kernel context!",
- regs);
if (used_math()) /* Using the FPU again. */
own_fpu(1);
else { /* First time FPU user. */
@@ -782,19 +780,7 @@ asmlinkage void do_cpu(struct pt_regs *regs)
set_used_math();
}
- if (raw_cpu_has_fpu) {
- if (test_thread_flag(TIF_ALLOW_FP_IN_KERNEL)) {
- local_irq_disable();
- if (cpu_has_fpu)
- regs->cp0_status |= ST0_CU1;
- /*
- * We must return without enabling
- * interrupts to ensure keep FPU
- * ownership until resume.
- */
- return;
- }
- } else {
+ if (!raw_cpu_has_fpu) {
int sig;
sig = fpu_emulator_cop1Handler(regs,
&current->thread.fpu, 0);
@@ -836,7 +822,6 @@ asmlinkage void do_cpu(struct pt_regs *regs)
case 2:
case 3:
- die_if_kernel("do_cpu invoked from kernel context!", regs);
break;
}
diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c
index f653946afc2..548dbe5ce7c 100644
--- a/arch/mips/mips-boards/generic/display.c
+++ b/arch/mips/mips-boards/generic/display.c
@@ -24,16 +24,16 @@
void mips_display_message(const char *str)
{
- static volatile unsigned int *display = NULL;
+ static unsigned int __iomem *display = NULL;
int i;
if (unlikely(display == NULL))
- display = (volatile unsigned int *)ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int));
+ display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int));
for (i = 0; i <= 14; i=i+2) {
if (*str)
- display[i] = *str++;
+ writel(*str++, display + i);
else
- display[i] = ' ';
+ writel(' ', display + i);
}
}
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c
index 3192a14698c..f98d60f7865 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mips-boards/generic/pci.c
@@ -65,7 +65,7 @@ static struct resource msc_io_resource = {
};
extern struct pci_ops bonito64_pci_ops;
-extern struct pci_ops gt64120_pci_ops;
+extern struct pci_ops gt64xxx_pci0_ops;
extern struct pci_ops msc_pci_ops;
static struct pci_controller bonito64_controller = {
@@ -76,7 +76,7 @@ static struct pci_controller bonito64_controller = {
};
static struct pci_controller gt64120_controller = {
- .pci_ops = &gt64120_pci_ops,
+ .pci_ops = &gt64xxx_pci0_ops,
.io_resource = &gt64120_io_resource,
.mem_resource = &gt64120_mem_resource,
};
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c
index 0996ba368b2..7a1bb51f81e 100644
--- a/arch/mips/mips-boards/generic/reset.c
+++ b/arch/mips/mips-boards/generic/reset.c
@@ -39,24 +39,24 @@ static void atlas_machine_power_off(void);
static void mips_machine_restart(char *command)
{
- volatile unsigned int *softres_reg = (unsigned int *)ioremap (SOFTRES_REG, sizeof(unsigned int));
+ unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
- *softres_reg = GORESET;
+ writew(GORESET, softres_reg);
}
static void mips_machine_halt(void)
{
- volatile unsigned int *softres_reg = (unsigned int *)ioremap (SOFTRES_REG, sizeof(unsigned int));
+ unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
- *softres_reg = GORESET;
+ writew(GORESET, softres_reg);
}
#if defined(CONFIG_MIPS_ATLAS)
static void atlas_machine_power_off(void)
{
- volatile unsigned int *psustby_reg = (unsigned int *)ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int));
+ unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int));
- *psustby_reg = ATLAS_GOSTBY;
+ writew(ATLAS_GOSTBY, psustby_reg);
}
#endif
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index 3c206bb1716..83d76025d61 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -42,8 +42,6 @@
#include <asm/mips-boards/msc01_pci.h>
#include <asm/msc01_ic.h>
-extern void mips_timer_interrupt(void);
-
static DEFINE_SPINLOCK(mips_irq_lock);
static inline int mips_pcibios_iack(void)
@@ -85,7 +83,7 @@ static inline int mips_pcibios_iack(void)
dummy = BONITO_PCIMAP_CFG;
iob(); /* sync */
- irq = *(volatile u32 *)(_pcictrl_bonito_pcicfg);
+ irq = readl((u32 *)_pcictrl_bonito_pcicfg);
iob(); /* sync */
irq &= 0xff;
BONITO_PCIMAP_CFG = 0;
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index 56ea76679cd..7873932532a 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -145,7 +145,8 @@ void __init plat_mem_setup(void)
#ifdef CONFIG_BLK_DEV_IDE
/* Check PCI clock */
{
- int jmpr = (*((volatile unsigned int *)ioremap(MALTA_JMPRS_REG, sizeof(unsigned int))) >> 2) & 0x07;
+ unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
+ int jmpr = (readw(jmpr_p) >> 2) & 0x07;
static const int pciclocks[] __initdata = {
33, 20, 25, 30, 12, 16, 37, 10
};
@@ -179,7 +180,6 @@ void __init plat_mem_setup(void)
};
#endif
#endif
-
mips_reboot_setup();
board_time_init = mips_time_init;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 4e8f1b68337..abf99b1eba1 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -96,7 +96,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
kaddr = kmap_coherent(page, vmaddr);
flush_data_cache_page((unsigned long)kaddr);
- kunmap_coherent(kaddr);
+ kunmap_coherent();
}
}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index e9951c0e689..2d1c2c02482 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -177,7 +177,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-void kunmap_coherent(struct page *page)
+void kunmap_coherent(void)
{
#ifndef CONFIG_MIPS_MT_SMTC
unsigned int wired;
@@ -210,7 +210,7 @@ void copy_user_highpage(struct page *to, struct page *from,
if (cpu_has_dc_aliases) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
- kunmap_coherent(from);
+ kunmap_coherent();
} else {
vfrom = kmap_atomic(from, KM_USER0);
copy_page(vto, vfrom);
@@ -233,7 +233,7 @@ void copy_to_user_page(struct vm_area_struct *vma,
if (cpu_has_dc_aliases) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
- kunmap_coherent(page);
+ kunmap_coherent();
} else
memcpy(dst, src, len);
if ((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc)
@@ -250,7 +250,7 @@ void copy_from_user_page(struct vm_area_struct *vma,
void *vfrom =
kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);
- kunmap_coherent(page);
+ kunmap_coherent();
} else
memcpy(dst, src, len);
}
@@ -351,18 +351,15 @@ void __init paging_init(void)
#endif
kmap_coherent_init();
-#ifdef CONFIG_ISA
- if (max_low_pfn >= MAX_DMA_PFN)
- if (min_low_pfn >= MAX_DMA_PFN) {
- zones_size[ZONE_DMA] = 0;
- zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
- } else {
- zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn;
- zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN;
- }
+#ifdef CONFIG_ZONE_DMA
+ if (min_low_pfn < MAX_DMA_PFN && MAX_DMA_PFN <= max_low_pfn) {
+ zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn;
+ zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN;
+ } else if (max_low_pfn < MAX_DMA_PFN)
+ zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn;
else
#endif
- zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn;
+ zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 69a8bcfe72b..4f94fa261aa 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -35,7 +35,7 @@
#define vpe_id() smp_processor_id()
#else
#define WHAT 0
-#define vpe_id() smp_processor_id()
+#define vpe_id() 0
#endif
#define __define_perf_accessors(r, n, np) \
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index bf85995ca04..df487c063b1 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -8,8 +8,7 @@ obj-y += pci.o pci-dac.o
# PCI bus host bridge specific code
#
obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
-obj-$(CONFIG_MIPS_GT64111) += ops-gt64111.o
-obj-$(CONFIG_MIPS_GT64120) += ops-gt64120.o
+obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o
obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c
index 6e72d213f4c..73d18503517 100644
--- a/arch/mips/pci/fixup-jmr3927.c
+++ b/arch/mips/pci/fixup-jmr3927.c
@@ -29,7 +29,6 @@
*/
#include <linux/types.h>
#include <linux/pci.h>
-#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/jmr3927/jmr3927.h>
@@ -81,14 +80,8 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/* Check OnBoard Ethernet (IDSEL=A24, DevNu=13) */
if (dev->bus->parent == NULL &&
- slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(24)) {
- extern int jmr3927_ether1_irq;
- /* check this irq line was reserved for ether1 */
- if (jmr3927_ether1_irq != JMR3927_IRQ_ETHER0)
- irq = JMR3927_IRQ_ETHER0;
- else
- irq = 0; /* disable */
- }
+ slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(24))
+ irq = JMR3927_IRQ_ETHER0;
return irq;
}
diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c
deleted file mode 100644
index ecd3991bd0e..00000000000
--- a/arch/mips/pci/ops-gt64111.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997, 2002 by Ralf Baechle
- * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/pci.h>
-#include <asm/io.h>
-#include <asm/gt64120.h>
-
-#include <asm/mach-cobalt/cobalt.h>
-
-/*
- * Device 31 on the GT64111 is used to generate PCI special
- * cycles, so we shouldn't expected to find a device there ...
- */
-static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn)
-{
- if (bus->number == 0 && PCI_SLOT(devfn) < 31)
- return 0;
-
- return -1;
-}
-
-static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
-{
- if (pci_range_ck(bus, devfn))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 4:
- PCI_CFG_SET(devfn, where);
- *val = GT_READ(GT_PCI0_CFGDATA_OFS);
- return PCIBIOS_SUCCESSFUL;
-
- case 2:
- PCI_CFG_SET(devfn, (where & ~0x3));
- *val = GT_READ(GT_PCI0_CFGDATA_OFS)
- >> ((where & 3) * 8);
- return PCIBIOS_SUCCESSFUL;
-
- case 1:
- PCI_CFG_SET(devfn, (where & ~0x3));
- *val = GT_READ(GT_PCI0_CFGDATA_OFS)
- >> ((where & 3) * 8);
- return PCIBIOS_SUCCESSFUL;
- }
-
- return PCIBIOS_BAD_REGISTER_NUMBER;
-}
-
-static int gt64111_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 tmp;
-
- if (pci_range_ck(bus, devfn))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 4:
- PCI_CFG_SET(devfn, where);
- GT_WRITE(GT_PCI0_CFGDATA_OFS, val);
-
- return PCIBIOS_SUCCESSFUL;
-
- case 2:
- PCI_CFG_SET(devfn, (where & ~0x3));
- tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
- tmp &= ~(0xffff << ((where & 0x3) * 8));
- tmp |= (val << ((where & 0x3) * 8));
- GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp);
-
- return PCIBIOS_SUCCESSFUL;
-
- case 1:
- PCI_CFG_SET(devfn, (where & ~0x3));
- tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
- tmp &= ~(0xff << ((where & 0x3) * 8));
- tmp |= (val << ((where & 0x3) * 8));
- GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp);
-
- return PCIBIOS_SUCCESSFUL;
- }
-
- return PCIBIOS_BAD_REGISTER_NUMBER;
-}
-
-struct pci_ops gt64111_pci_ops = {
- .read = gt64111_pci_read_config,
- .write = gt64111_pci_write_config,
-};
diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64xxx_pci0.c
index 6335844d607..3d896c5f413 100644
--- a/arch/mips/pci/ops-gt64120.c
+++ b/arch/mips/pci/ops-gt64xxx_pci0.c
@@ -39,8 +39,8 @@
#define PCI_CFG_TYPE1_DEV_SHF 11
#define PCI_CFG_TYPE1_BUS_SHF 16
-static int gt64120_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
+static int gt64xxx_pci0_pcibios_config_access(unsigned char access_type,
+ struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
{
unsigned char busnum = bus->number;
u32 intr;
@@ -100,13 +100,13 @@ static int gt64120_pcibios_config_access(unsigned char access_type,
* We can't address 8 and 16 bit words directly. Instead we have to
* read/write a 32bit word and mask/modify the data we actually want.
*/
-static int gt64120_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
+static int gt64xxx_pci0_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
{
u32 data = 0;
- if (gt64120_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data))
+ if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+ where, &data))
return PCIBIOS_DEVICE_NOT_FOUND;
if (size == 1)
@@ -119,16 +119,16 @@ static int gt64120_pcibios_read(struct pci_bus *bus, unsigned int devfn,
return PCIBIOS_SUCCESSFUL;
}
-static int gt64120_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
+static int gt64xxx_pci0_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
{
u32 data = 0;
if (size == 4)
data = val;
else {
- if (gt64120_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data))
+ if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus,
+ devfn, where, &data))
return PCIBIOS_DEVICE_NOT_FOUND;
if (size == 1)
@@ -139,14 +139,14 @@ static int gt64120_pcibios_write(struct pci_bus *bus, unsigned int devfn,
(val << ((where & 3) << 3));
}
- if (gt64120_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
- &data))
+ if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
+ where, &data))
return PCIBIOS_DEVICE_NOT_FOUND;
return PCIBIOS_SUCCESSFUL;
}
-struct pci_ops gt64120_pci_ops = {
- .read = gt64120_pcibios_read,
- .write = gt64120_pcibios_write
+struct pci_ops gt64xxx_pci0_ops = {
+ .read = gt64xxx_pci0_pcibios_read,
+ .write = gt64xxx_pci0_pcibios_write
};
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 42530a0b84b..aa698bd0d5e 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -40,7 +40,6 @@
#include <asm/addrspace.h>
#include <asm/jmr3927/jmr3927.h>
-#include <asm/debug.h>
static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
unsigned char where)
@@ -130,234 +129,3 @@ struct pci_ops jmr3927_pci_ops = {
jmr3927_pci_read_config,
jmr3927_pci_write_config,
};
-
-
-#ifndef JMR3927_INIT_INDIRECT_PCI
-
-inline unsigned long tc_readl(volatile __u32 * addr)
-{
- return readl(addr);
-}
-
-inline void tc_writel(unsigned long data, volatile __u32 * addr)
-{
- writel(data, addr);
-}
-#else
-
-unsigned long tc_readl(volatile __u32 * addr)
-{
- unsigned long val;
-
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
- (unsigned long) CPHYSADDR(addr);
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
- (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) |
- PCI_IPCIBE_IBE_LONG;
- while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
- val =
- le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
- ipcidata);
- /* clear by setting */
- tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
- return val;
-}
-
-void tc_writel(unsigned long data, volatile __u32 * addr)
-{
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
- cpu_to_le32(data);
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
- (unsigned long) CPHYSADDR(addr);
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
- (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) |
- PCI_IPCIBE_IBE_LONG;
- while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
- /* clear by setting */
- tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-}
-
-unsigned char tx_ioinb(unsigned char *addr)
-{
- unsigned long val;
- __u32 ioaddr;
- int offset;
- int byte;
-
- ioaddr = (unsigned long) addr;
- offset = ioaddr & 0x3;
- byte = 0xf & ~(8 >> offset);
-
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
- (unsigned long) ioaddr;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
- (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
- while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
- val =
- le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
- ipcidata);
- val = val & 0xff;
- /* clear by setting */
- tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
- return val;
-}
-
-void tx_iooutb(unsigned long data, unsigned char *addr)
-{
- __u32 ioaddr;
- int offset;
- int byte;
-
- data = data | (data << 8) | (data << 16) | (data << 24);
- ioaddr = (unsigned long) addr;
- offset = ioaddr & 0x3;
- byte = 0xf & ~(8 >> offset);
-
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
- (unsigned long) ioaddr;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
- (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
- while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
- /* clear by setting */
- tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-}
-
-unsigned short tx_ioinw(unsigned short *addr)
-{
- unsigned long val;
- __u32 ioaddr;
- int offset;
- int byte;
-
- ioaddr = (unsigned long) addr;
- offset = ioaddr & 0x2;
- byte = 3 << offset;
-
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
- (unsigned long) ioaddr;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
- (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
- while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
- val =
- le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
- ipcidata);
- val = val & 0xffff;
- /* clear by setting */
- tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
- return val;
-
-}
-
-void tx_iooutw(unsigned long data, unsigned short *addr)
-{
- __u32 ioaddr;
- int offset;
- int byte;
-
- data = data | (data << 16);
- ioaddr = (unsigned long) addr;
- offset = ioaddr & 0x2;
- byte = 3 << offset;
-
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
- (unsigned long) ioaddr;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
- (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
- while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
- /* clear by setting */
- tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-}
-
-unsigned long tx_ioinl(unsigned int *addr)
-{
- unsigned long val;
- __u32 ioaddr;
-
- ioaddr = (unsigned long) addr;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
- (unsigned long) ioaddr;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
- (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) |
- PCI_IPCIBE_IBE_LONG;
- while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
- val =
- le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
- ipcidata);
- /* clear by setting */
- tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
- return val;
-}
-
-void tx_iooutl(unsigned long data, unsigned int *addr)
-{
- __u32 ioaddr;
-
- ioaddr = (unsigned long) addr;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
- cpu_to_le32(data);
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
- (unsigned long) ioaddr;
- *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
- (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) |
- PCI_IPCIBE_IBE_LONG;
- while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
- /* clear by setting */
- tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-}
-
-void tx_insbyte(unsigned char *addr, void *buffer, unsigned int count)
-{
- unsigned char *ptr = (unsigned char *) buffer;
-
- while (count--) {
- *ptr++ = tx_ioinb(addr);
- }
-}
-
-void tx_insword(unsigned short *addr, void *buffer, unsigned int count)
-{
- unsigned short *ptr = (unsigned short *) buffer;
-
- while (count--) {
- *ptr++ = tx_ioinw(addr);
- }
-}
-
-void tx_inslong(unsigned int *addr, void *buffer, unsigned int count)
-{
- unsigned long *ptr = (unsigned long *) buffer;
-
- while (count--) {
- *ptr++ = tx_ioinl(addr);
- }
-}
-
-void tx_outsbyte(unsigned char *addr, void *buffer, unsigned int count)
-{
- unsigned char *ptr = (unsigned char *) buffer;
-
- while (count--) {
- tx_iooutb(*ptr++, addr);
- }
-}
-
-void tx_outsword(unsigned short *addr, void *buffer, unsigned int count)
-{
- unsigned short *ptr = (unsigned short *) buffer;
-
- while (count--) {
- tx_iooutw(*ptr++, addr);
- }
-}
-
-void tx_outslong(unsigned int *addr, void *buffer, unsigned int count)
-{
- unsigned long *ptr = (unsigned long *) buffer;
-
- while (count--) {
- tx_iooutl(*ptr++, addr);
- }
-}
-#endif
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index 88fb191ad2e..985784a3e6f 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -12,7 +12,7 @@
#include <asm/bootinfo.h>
extern struct pci_ops nile4_pci_ops;
-extern struct pci_ops gt64120_pci_ops;
+extern struct pci_ops gt64xxx_pci0_ops;
static struct resource lasat_pci_mem_resource = {
.name = "LASAT PCI MEM",
.start = 0x18000000,
@@ -38,7 +38,7 @@ static int __init lasat_pci_setup(void)
switch (mips_machtype) {
case MACH_LASAT_100:
- lasat_pci_controller.pci_ops = &gt64120_pci_ops;
+ lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
break;
case MACH_LASAT_200:
lasat_pci_controller.pci_ops = &nile4_pci_ops;
diff --git a/arch/mips/pci/pci-ocelot.c b/arch/mips/pci/pci-ocelot.c
index 2b9495dce6b..7f94f26d35a 100644
--- a/arch/mips/pci/pci-ocelot.c
+++ b/arch/mips/pci/pci-ocelot.c
@@ -81,7 +81,7 @@ static struct resource ocelot_io_resource = {
};
static struct pci_controller ocelot_pci_controller = {
- .pci_ops = gt64120_pci_ops;
+ .pci_ops = gt64xxx_pci0_ops;
.mem_resource = &ocelot_mem_resource;
.io_resource = &ocelot_io_resource;
};
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index de7cfc559dd..8108231f2e2 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -77,6 +77,13 @@ pcibios_align_resource(void *data, struct resource *res,
void __init register_pci_controller(struct pci_controller *hose)
{
+ if (request_resource(&iomem_resource, hose->mem_resource) < 0)
+ goto out;
+ if (request_resource(&ioport_resource, hose->io_resource) < 0) {
+ release_resource(hose->mem_resource);
+ goto out;
+ }
+
*hose_tail = hose;
hose_tail = &hose->next;
@@ -87,6 +94,11 @@ void __init register_pci_controller(struct pci_controller *hose)
printk(KERN_WARNING
"registering PCI controller with io_map_base unset\n");
}
+ return;
+
+out:
+ printk(KERN_WARNING
+ "Skipping PCI bus scan due to resource conflict\n");
}
/* Most MIPS systems have straight-forward swizzling needs. */
@@ -121,11 +133,6 @@ static int __init pcibios_init(void)
/* Scan all of the recorded PCI controllers. */
for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
- if (request_resource(&iomem_resource, hose->mem_resource) < 0)
- goto out;
- if (request_resource(&ioport_resource, hose->io_resource) < 0)
- goto out_free_mem_resource;
-
if (!hose->iommu)
PCI_DMA_BUS_IS_PHYS = 1;
@@ -144,14 +151,6 @@ static int __init pcibios_init(void)
need_domain_info = 1;
}
}
- continue;
-
-out_free_mem_resource:
- release_resource(hose->mem_resource);
-
-out:
- printk(KERN_WARNING
- "Skipping PCI bus scan due to resource conflict\n");
}
if (!pci_probe_only)
diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index fd29fd407ae..e19d60d5fcc 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -52,8 +52,7 @@
* national semiconductor nv ram chip the op code is 3 bits and
* the address is 6/8 bits.
*/
-static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd,
- unsigned reg)
+static inline void eeprom_cmd(unsigned int *ctrl, unsigned cmd, unsigned reg)
{
unsigned short ser_cmd;
int i;
@@ -61,33 +60,34 @@ static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd,
ser_cmd = cmd | (reg << (16 - BITS_IN_COMMAND));
for (i = 0; i < BITS_IN_COMMAND; i++) {
if (ser_cmd & (1<<15)) /* if high order bit set */
- *ctrl |= EEPROM_DATO;
+ writel(readl(ctrl) | EEPROM_DATO, ctrl);
else
- *ctrl &= ~EEPROM_DATO;
- *ctrl &= ~EEPROM_ECLK;
- *ctrl |= EEPROM_ECLK;
+ writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
+ writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
+ writel(readl(ctrl) | EEPROM_ECLK, ctrl);
ser_cmd <<= 1;
}
- *ctrl &= ~EEPROM_DATO; /* see data sheet timing diagram */
+ /* see data sheet timing diagram */
+ writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
}
-unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg)
+unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg)
{
unsigned short res = 0;
int i;
- *ctrl &= ~EEPROM_EPROT;
+ writel(readl(ctrl) & ~EEPROM_EPROT, ctrl);
eeprom_cs_on(ctrl);
eeprom_cmd(ctrl, EEPROM_READ, reg);
/* clock the data ouf of serial mem */
for (i = 0; i < 16; i++) {
- *ctrl &= ~EEPROM_ECLK;
+ writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
delay();
- *ctrl |= EEPROM_ECLK;
+ writel(readl(ctrl) | EEPROM_ECLK, ctrl);
delay();
res <<= 1;
- if (*ctrl & EEPROM_DATI)
+ if (readl(ctrl) & EEPROM_DATI)
res |= 1;
}
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 20555473409..8e88a442b22 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -94,7 +94,7 @@ static int indy_rtc_set_time(unsigned long tim)
static unsigned long dosample(void)
{
u32 ct0, ct1;
- volatile u8 msb, lsb;
+ u8 msb, lsb;
/* Start the counter. */
sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
@@ -107,21 +107,21 @@ static unsigned long dosample(void)
/* Latch and spin until top byte of counter2 is zero */
do {
- sgint->tcword = SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT;
- lsb = sgint->tcnt2;
- msb = sgint->tcnt2;
+ writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword);
+ lsb = readb(&sgint->tcnt2);
+ msb = readb(&sgint->tcnt2);
ct1 = read_c0_count();
} while (msb);
/* Stop the counter. */
- sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
- SGINT_TCWORD_MSWST);
+ writeb(sgint->tcword, (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
+ SGINT_TCWORD_MSWST));
/*
* Return the difference, this is how far the r4k counter increments
* for every 1/HZ seconds. We round off the nearest 1 MHz of master
* clock (= 1000000 / HZ / 2).
*/
- /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
+
return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
}
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index bdf24a7b549..e6b003ec671 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -2,6 +2,7 @@ config SIBYTE_SB1250
bool
select HW_HAS_PCI
select SIBYTE_ENABLE_LDT_IF_PCI
+ select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
select SYS_SUPPORTS_SMP
@@ -34,6 +35,7 @@ config SIBYTE_BCM112X
config SIBYTE_BCM1x80
bool
select HW_HAS_PCI
+ select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
select SYS_SUPPORTS_SMP
diff --git a/arch/mips/sibyte/common/Makefile b/arch/mips/sibyte/common/Makefile
new file mode 100644
index 00000000000..8a06a4fb521
--- /dev/null
+++ b/arch/mips/sibyte/common/Makefile
@@ -0,0 +1,5 @@
+obj-y :=
+
+obj-$(CONFIG_SIBYTE_TBPROF) += sb_tbprof.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index ea0ca131a3c..4fcdaa8ba51 100644
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -31,14 +31,29 @@
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/errno.h>
-#include <linux/types.h>
#include <linux/wait.h>
-
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
+
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/bcm1480_int.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_scd.h>
#include <asm/sibyte/sb1250_int.h>
+#else
+#error invalid SiByte UART configuation
+#endif
+
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#undef K_INT_TRACE_FREEZE
+#define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE
+#undef K_INT_PERF_CNT
+#define K_INT_PERF_CNT K_BCM1480_INT_PERF_CNT
+#endif
+
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -118,7 +133,7 @@ static struct sbprof_tb sbp;
: /* inputs */ \
: /* modifies */ "$8" )
-#define DEVNAME "bcm1250_tbprof"
+#define DEVNAME "sb_tbprof"
#define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES)
@@ -132,6 +147,7 @@ static struct sbprof_tb sbp;
* overflow.
*
* We map the interrupt for trace_buffer_freeze to handle it on CPU 0.
+ *
*/
static u64 tb_period;
@@ -143,25 +159,36 @@ static void arm_tb(void)
u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
/*
- * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger
- *start of trace. XXX vary sampling period
+ * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
+ * trigger start of trace. XXX vary sampling period
*/
__raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
/*
- * Unfortunately, in Pass 2 we must clear all counters to knock down a
- * previous interrupt request. This means that bus profiling requires
- * ALL of the SCD perf counters.
+ * Unfortunately, in Pass 2 we must clear all counters to knock down
+ * a previous interrupt request. This means that bus profiling
+ * requires ALL of the SCD perf counters.
*/
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+ /* keep counters 0,2,3,4,5,6,7 as is */
+ V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
+ IOADDR(A_BCM1480_SCD_PERF_CNT_CFG0));
+ __raw_writeq(
+ M_SPC_CFG_ENABLE | /* enable counting */
+ M_SPC_CFG_CLEAR | /* clear all counters */
+ V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
+ IOADDR(A_BCM1480_SCD_PERF_CNT_CFG1));
+#else
__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
/* keep counters 0,2,3 as is */
M_SPC_CFG_ENABLE | /* enable counting */
M_SPC_CFG_CLEAR | /* clear all counters */
V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
IOADDR(A_SCD_PERF_CNT_CFG));
+#endif
__raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
-
/* Reset the trace buffer */
__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
#if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
@@ -190,38 +217,37 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
/* Subscripts decrease to put bundle in the order */
/* t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */
p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- /* read t2 hi */
+ /* read t2 hi */
p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- /* read t2 lo */
+ /* read t2 lo */
p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- /* read t1 hi */
+ /* read t1 hi */
p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- /* read t1 lo */
+ /* read t1 lo */
p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- /* read t0 hi */
+ /* read t0 hi */
p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
- /* read t0 lo */
+ /* read t0 lo */
}
if (!sbp.tb_enable) {
pr_debug(DEVNAME ": tb_intr shutdown\n");
__raw_writeq(M_SCD_TRACE_CFG_RESET,
IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0;
- wake_up(&sbp.tb_sync);
+ wake_up_interruptible(&sbp.tb_sync);
} else {
- arm_tb(); /* knock down current interrupt and get another one later */
+ /* knock down current interrupt and get another one later */
+ arm_tb();
}
} else {
/* No more trace buffer samples */
pr_debug(DEVNAME ": tb_intr full\n");
__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0;
- if (!sbp.tb_enable) {
- wake_up(&sbp.tb_sync);
- }
- wake_up(&sbp.tb_read);
+ if (!sbp.tb_enable)
+ wake_up_interruptible(&sbp.tb_sync);
+ wake_up_interruptible(&sbp.tb_read);
}
-
return IRQ_HANDLED;
}
@@ -250,8 +276,8 @@ static int sbprof_zbprof_start(struct file *filp)
sbp.next_tb_sample = 0;
filp->f_pos = 0;
- err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0,
- DEVNAME " trace freeze", &sbp);
+ err = request_irq (K_INT_TRACE_FREEZE, sbprof_tb_intr, 0,
+ DEVNAME " trace freeze", &sbp);
if (err)
return -EBUSY;
@@ -263,23 +289,29 @@ static int sbprof_zbprof_start(struct file *filp)
IOADDR(A_SCD_PERF_CNT_CFG));
/*
- * We grab this interrupt to prevent others from trying to use it, even
- * though we don't want to service the interrupts (they only feed into
- * the trace-on-interrupt mechanism)
+ * We grab this interrupt to prevent others from trying to use
+ * it, even though we don't want to service the interrupts
+ * (they only feed into the trace-on-interrupt mechanism)
*/
- err = request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0,
- DEVNAME " scd perfcnt", &sbp);
- if (err)
- goto out_free_irq;
+ if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
+ free_irq(K_INT_TRACE_FREEZE, &sbp);
+ return -EBUSY;
+ }
/*
- * I need the core to mask these, but the interrupt mapper to pass them
- * through. I am exploiting my knowledge that cp0_status masks out
- * IP[5]. krw
+ * I need the core to mask these, but the interrupt mapper to
+ * pass them through. I am exploiting my knowledge that
+ * cp0_status masks out IP[5]. krw
*/
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq(K_BCM1480_INT_MAP_I3,
+ IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) +
+ ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3)));
+#else
__raw_writeq(K_INT_MAP_I3,
IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
(K_INT_PERF_CNT << 3)));
+#endif
/* Initialize address traps */
__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
@@ -298,7 +330,7 @@ static int sbprof_zbprof_start(struct file *filp)
__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
/* Initialize Trace Event 0-7 */
- /* when interrupt */
+ /* when interrupt */
__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
@@ -324,24 +356,23 @@ static int sbprof_zbprof_start(struct file *filp)
__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f),
+ IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L)));
+#else
__raw_writeq(1ULL << K_INT_PERF_CNT,
IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
-
+#endif
arm_tb();
pr_debug(DEVNAME ": done starting\n");
return 0;
-
-out_free_irq:
- free_irq(K_INT_TRACE_FREEZE, &sbp);
-
- return err;
}
static int sbprof_zbprof_stop(void)
{
- int err;
+ int err = 0;
pr_debug(DEVNAME ": stopping\n");
@@ -365,7 +396,7 @@ static int sbprof_zbprof_stop(void)
pr_debug(DEVNAME ": done stopping\n");
- return 0;
+ return err;
}
static int sbprof_tb_open(struct inode *inode, struct file *filp)
@@ -380,11 +411,9 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp)
return -EBUSY;
memset(&sbp, 0, sizeof(struct sbprof_tb));
-
sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
if (!sbp.sbprof_tbbuf)
return -ENOMEM;
-
memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
init_waitqueue_head(&sbp.tb_sync);
init_waitqueue_head(&sbp.tb_read);
@@ -397,8 +426,9 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp)
static int sbprof_tb_release(struct inode *inode, struct file *filp)
{
- int minor = iminor(inode);
+ int minor;
+ minor = iminor(inode);
if (minor != 0 || !sbp.open)
return -ENODEV;
@@ -419,10 +449,10 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
size_t size, loff_t *offp)
{
int cur_sample, sample_off, cur_count, sample_left;
- long cur_off = *offp;
- char *dest = buf;
- int count = 0;
char *src;
+ int count = 0;
+ char *dest = buf;
+ long cur_off = *offp;
if (!access_ok(VERIFY_WRITE, buf, size))
return -EFAULT;
@@ -445,7 +475,6 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
mutex_unlock(&sbp.lock);
return err;
}
-
pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
cur_sample, cur_count);
size -= cur_count;
@@ -461,45 +490,46 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
dest += cur_count;
count += cur_count;
}
-
*offp = cur_off;
mutex_unlock(&sbp.lock);
return count;
}
-static long sbprof_tb_ioctl(struct file *filp, unsigned int command,
- unsigned long arg)
+static long sbprof_tb_ioctl(struct file *filp,
+ unsigned int command,
+ unsigned long arg)
{
- int error = 0;
+ int err = 0;
switch (command) {
case SBPROF_ZBSTART:
mutex_lock(&sbp.lock);
- error = sbprof_zbprof_start(filp);
+ err = sbprof_zbprof_start(filp);
mutex_unlock(&sbp.lock);
break;
case SBPROF_ZBSTOP:
mutex_lock(&sbp.lock);
- error = sbprof_zbprof_stop();
+ err = sbprof_zbprof_stop();
mutex_unlock(&sbp.lock);
break;
- case SBPROF_ZBWAITFULL:
- error = wait_event_interruptible(sbp.tb_read, TB_FULL);
- if (error)
+ case SBPROF_ZBWAITFULL: {
+ err = wait_event_interruptible(sbp.tb_read, TB_FULL);
+ if (err)
break;
- error = put_user(TB_FULL, (int *) arg);
+ err = put_user(TB_FULL, (int *) arg);
break;
+ }
default:
- error = -EINVAL;
+ err = -EINVAL;
break;
}
- return error;
+ return err;
}
static const struct file_operations sbprof_tb_fops = {
@@ -544,8 +574,8 @@ static int __init sbprof_tb_init(void)
sbp.open = 0;
tb_period = zbbus_mhz * 10000LL;
- pr_info(DEVNAME ": initialized - tb_period = %lld\n", tb_period);
-
+ pr_info(DEVNAME ": initialized - tb_period = %lld\n",
+ (long long) tb_period);
return 0;
out_class:
diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile
index 04c0f1a7f61..df662c61473 100644
--- a/arch/mips/sibyte/sb1250/Makefile
+++ b/arch/mips/sibyte/sb1250/Makefile
@@ -1,6 +1,5 @@
obj-y := setup.o irq.o time.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_SIBYTE_TBPROF) += bcm1250_tbprof.o
obj-$(CONFIG_SIBYTE_STANDALONE) += prom.o
obj-$(CONFIG_SIBYTE_BUS_WATCHER) += bus_watcher.o
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index 87188f0f6fb..f4a6169aa0a 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -141,6 +141,18 @@ static int __init setup_bcm112x(void)
periph_rev = 3;
pass_str = "A2";
break;
+ case K_SYS_REVISION_BCM112x_A3:
+ periph_rev = 3;
+ pass_str = "A3";
+ break;
+ case K_SYS_REVISION_BCM112x_A4:
+ periph_rev = 3;
+ pass_str = "A4";
+ break;
+ case K_SYS_REVISION_BCM112x_B0:
+ periph_rev = 3;
+ pass_str = "B0";
+ break;
default:
printk("Unknown %s rev %x\n", soc_str, soc_pass);
ret = 1;
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 8e8593b64f6..9ee208daa8b 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -91,7 +91,7 @@ static struct platform_device pcimt_serial8250_device = {
};
static struct resource sni_io_resource = {
- .start = 0x00001000UL,
+ .start = 0x00000000UL,
.end = 0x03bfffffUL,
.name = "PCIMT IO MEM",
.flags = IORESOURCE_IO,
@@ -132,107 +132,19 @@ static struct resource pcimt_io_resources[] = {
};
static struct resource sni_mem_resource = {
- .start = 0x10000000UL,
- .end = 0xffffffffUL,
+ .start = 0x18000000UL,
+ .end = 0x1fbfffffUL,
.name = "PCIMT PCI MEM",
.flags = IORESOURCE_MEM
};
-/*
- * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
- * for other purposes. Be paranoid and allocate all of the before the PCI
- * code gets a chance to to map anything else there ...
- *
- * This leaves the following areas available:
- *
- * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
- * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
- * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
- * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
- * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
- */
-static struct resource pcimt_mem_resources[] = {
- {
- .start = 0x100a0000,
- .end = 0x100bffff,
- .name = "Video RAM area",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x100c0000,
- .end = 0x100fffff,
- .name = "ISA Reserved",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x14000000,
- .end = 0x17bfffff,
- .name = "PCI IO",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x17c00000,
- .end = 0x17ffffff,
- .name = "Cache Replacement Area",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1a000000,
- .end = 0x1a000003,
- .name = "PCI INT Acknowledge",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fc00000,
- .end = 0x1fc7ffff,
- .name = "Boot PROM",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fc80000,
- .end = 0x1fcfffff,
- .name = "Diag PROM",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fd00000,
- .end = 0x1fdfffff,
- .name = "X-Bus",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fe00000,
- .end = 0x1fefffff,
- .name = "BIOS map",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1ff00000,
- .end = 0x1ff7ffff,
- .name = "NVRAM / EEPROM",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fff0000,
- .end = 0x1fffefff,
- .name = "ASIC PCI",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1ffff000,
- .end = 0x1fffffff,
- .name = "MP Agent",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x20000000,
- .end = 0x9fffffff,
- .name = "Main Memory",
- .flags = IORESOURCE_BUSY
- }
-};
-
static void __init sni_pcimt_resource_init(void)
{
int i;
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
- request_resource(&ioport_resource, pcimt_io_resources + i);
-
- /* request mem space for pcimt-specific devices */
- for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
- request_resource(&sni_mem_resource, pcimt_mem_resources + i);
-
- ioport_resource.end = sni_io_resource.end;
+ request_resource(&sni_io_resource, pcimt_io_resources + i);
}
extern struct pci_ops sni_pcimt_ops;
@@ -240,9 +152,10 @@ extern struct pci_ops sni_pcimt_ops;
static struct pci_controller sni_controller = {
.pci_ops = &sni_pcimt_ops,
.mem_resource = &sni_mem_resource,
- .mem_offset = 0x10000000UL,
+ .mem_offset = 0x00000000UL,
.io_resource = &sni_io_resource,
- .io_offset = 0x00000000UL
+ .io_offset = 0x00000000UL,
+ .io_map_base = SNI_PORT_BASE
};
static void enable_pcimt_irq(unsigned int irq)
@@ -363,15 +276,17 @@ void __init sni_pcimt_irq_init(void)
void sni_pcimt_init(void)
{
- sni_pcimt_resource_init();
sni_pcimt_detect();
sni_pcimt_sc_init();
rtc_mips_get_time = mc146818_get_cmos_time;
rtc_mips_set_time = mc146818_set_rtc_mmss;
board_time_init = sni_cpu_time_init;
+ ioport_resource.end = sni_io_resource.end;
#ifdef CONFIG_PCI
+ PCIBIOS_MIN_IO = 0x9000;
register_pci_controller(&sni_controller);
#endif
+ sni_pcimt_resource_init();
}
static int __init snirm_pcimt_setup_devinit(void)
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index 1dfc3f00bbd..00d151f4d12 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -43,7 +43,7 @@ static struct platform_device pcit_serial8250_device = {
};
static struct plat_serial8250_port pcit_cplus_data[] = {
- PORT(0x3f8, 4),
+ PORT(0x3f8, 0),
PORT(0x2f8, 3),
PORT(0x3e8, 4),
PORT(0x2e8, 3),
@@ -59,9 +59,9 @@ static struct platform_device pcit_cplus_serial8250_device = {
};
static struct resource sni_io_resource = {
- .start = 0x00001000UL,
+ .start = 0x00000000UL,
.end = 0x03bfffffUL,
- .name = "PCIT IO MEM",
+ .name = "PCIT IO",
.flags = IORESOURCE_IO,
};
@@ -92,6 +92,11 @@ static struct resource pcit_io_resources[] = {
.name = "dma2",
.flags = IORESOURCE_BUSY
}, {
+ .start = 0xcf8,
+ .end = 0xcfb,
+ .name = "PCI config addr",
+ .flags = IORESOURCE_BUSY
+ }, {
.start = 0xcfc,
.end = 0xcff,
.name = "PCI config data",
@@ -100,107 +105,19 @@ static struct resource pcit_io_resources[] = {
};
static struct resource sni_mem_resource = {
- .start = 0x10000000UL,
- .end = 0xffffffffUL,
+ .start = 0x18000000UL,
+ .end = 0x1fbfffffUL,
.name = "PCIT PCI MEM",
.flags = IORESOURCE_MEM
};
-/*
- * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
- * for other purposes. Be paranoid and allocate all of the before the PCI
- * code gets a chance to to map anything else there ...
- *
- * This leaves the following areas available:
- *
- * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
- * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
- * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
- * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
- * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
- */
-static struct resource pcit_mem_resources[] = {
- {
- .start = 0x14000000,
- .end = 0x17bfffff,
- .name = "PCI IO",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x17c00000,
- .end = 0x17ffffff,
- .name = "Cache Replacement Area",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x180a0000,
- .end = 0x180bffff,
- .name = "Video RAM area",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x180c0000,
- .end = 0x180fffff,
- .name = "ISA Reserved",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x19000000,
- .end = 0x1fbfffff,
- .name = "PCI MEM",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fc00000,
- .end = 0x1fc7ffff,
- .name = "Boot PROM",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fc80000,
- .end = 0x1fcfffff,
- .name = "Diag PROM",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fd00000,
- .end = 0x1fdfffff,
- .name = "X-Bus",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fe00000,
- .end = 0x1fefffff,
- .name = "BIOS map",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1ff00000,
- .end = 0x1ff7ffff,
- .name = "NVRAM / EEPROM",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1fff0000,
- .end = 0x1fffefff,
- .name = "MAUI ASIC",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x1ffff000,
- .end = 0x1fffffff,
- .name = "MP Agent",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x20000000,
- .end = 0x9fffffff,
- .name = "Main Memory",
- .flags = IORESOURCE_BUSY
- }
-};
-
static void __init sni_pcit_resource_init(void)
{
int i;
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < ARRAY_SIZE(pcit_io_resources); i++)
- request_resource(&ioport_resource, pcit_io_resources + i);
-
- /* request mem space for pcimt-specific devices */
- for (i = 0; i < ARRAY_SIZE(pcit_mem_resources); i++)
- request_resource(&sni_mem_resource, pcit_mem_resources + i);
-
- ioport_resource.end = sni_io_resource.end;
+ request_resource(&sni_io_resource, pcit_io_resources + i);
}
@@ -209,9 +126,10 @@ extern struct pci_ops sni_pcit_ops;
static struct pci_controller sni_pcit_controller = {
.pci_ops = &sni_pcit_ops,
.mem_resource = &sni_mem_resource,
- .mem_offset = 0x10000000UL,
+ .mem_offset = 0x00000000UL,
.io_resource = &sni_io_resource,
- .io_offset = 0x00000000UL
+ .io_offset = 0x00000000UL,
+ .io_map_base = SNI_PORT_BASE
};
static void enable_pcit_irq(unsigned int irq)
@@ -262,7 +180,7 @@ static void pcit_hwint0(void)
int irq;
clear_c0_status(IE_IRQ0);
- irq = ffs((pending >> 16) & 0x7f);
+ irq = ffs((pending >> 16) & 0x3f);
if (likely(irq > 0))
do_IRQ (irq + SNI_PCIT_INT_START - 1);
@@ -289,6 +207,8 @@ static void sni_pcit_hwint_cplus(void)
if (pending & C_IRQ0)
pcit_hwint0();
+ else if (pending & C_IRQ1)
+ do_IRQ (MIPS_CPU_IRQ_BASE + 3);
else if (pending & C_IRQ2)
do_IRQ (MIPS_CPU_IRQ_BASE + 4);
else if (pending & C_IRQ3)
@@ -317,21 +237,23 @@ void __init sni_pcit_cplus_irq_init(void)
mips_cpu_irq_init();
for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
set_irq_chip(i, &pcit_irq_type);
- *(volatile u32 *)SNI_PCIT_INT_REG = 0;
+ *(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
sni_hwint = sni_pcit_hwint_cplus;
change_c0_status(ST0_IM, IE_IRQ0);
- setup_irq (SNI_PCIT_INT_START + 6, &sni_isa_irq);
+ setup_irq (MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq);
}
void sni_pcit_init(void)
{
- sni_pcit_resource_init();
rtc_mips_get_time = mc146818_get_cmos_time;
rtc_mips_set_time = mc146818_set_rtc_mmss;
board_time_init = sni_cpu_time_init;
+ ioport_resource.end = sni_io_resource.end;
#ifdef CONFIG_PCI
+ PCIBIOS_MIN_IO = 0x9000;
register_pci_controller(&sni_pcit_controller);
#endif
+ sni_pcit_resource_init();
}
static int __init snirm_pcit_setup_devinit(void)
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 92f41f6f934..8f4d3e74c23 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -1,6 +1,10 @@
-config CASIO_E55
- bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
+choice
+ prompt "Machine type"
depends on MACH_VR41XX
+ default TANBAC_TB022X
+
+config CASIO_E55
+ bool "CASIO CASSIOPEIA E-10/15/55/65"
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
@@ -8,8 +12,7 @@ config CASIO_E55
select SYS_SUPPORTS_LITTLE_ENDIAN
config IBM_WORKPAD
- bool "Support for IBM WorkPad z50"
- depends on MACH_VR41XX
+ bool "IBM WorkPad z50"
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
@@ -17,26 +20,18 @@ config IBM_WORKPAD
select SYS_SUPPORTS_LITTLE_ENDIAN
config NEC_CMBVR4133
- bool "Support for NEC CMB-VR4133"
- depends on MACH_VR41XX
+ bool "NEC CMB-VR4133"
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
-config ROCKHOPPER
- bool "Support for Rockhopper baseboard"
- depends on NEC_CMBVR4133
- select I8259
- select HAVE_STD_PC_SERIAL_PORT
-
config TANBAC_TB022X
- bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
- depends on MACH_VR41XX
+ bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
select DMA_NONCOHERENT
- select HW_HAS_PCI
select IRQ_CPU
+ select HW_HAS_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
help
@@ -46,40 +41,65 @@ config TANBAC_TB022X
Please refer to <http://www.tanbac.co.jp/>
about VR4131 multichip module and VR4131DIMM.
-config TANBAC_TB0226
- bool "Support for TANBAC Mbase(TB0226)"
+config VICTOR_MPC30X
+ bool "Victor MP-C303/304"
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select HW_HAS_PCI
+ select PCI_VR41XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config ZAO_CAPCELLA
+ bool "ZAO Networks Capcella"
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select HW_HAS_PCI
+ select PCI_VR41XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+endchoice
+
+config ROCKHOPPER
+ bool "Support for Rockhopper base board"
+ depends on NEC_CMBVR4133
+ select PCI_VR41XX
+ select I8259
+ select HAVE_STD_PC_SERIAL_PORT
+
+choice
+ prompt "Base board type"
depends on TANBAC_TB022X
+ default TANBAC_TB0287
+
+config TANBAC_TB0219
+ bool "TANBAC DIMM Evaluation Kit(TB0219)"
select GPIO_VR41XX
+ select PCI_VR41XX
+ help
+ The TANBAC DIMM Evaluation Kit(TB0219) is a MIPS-based platform
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/> about DIMM Evaluation Kit.
+
+config TANBAC_TB0226
+ bool "TANBAC Mbase(TB0226)"
+ select GPIO_VR41XX
+ select PCI_VR41XX
help
The TANBAC Mbase(TB0226) is a MIPS-based platform
manufactured by TANBAC.
Please refer to <http://www.tanbac.co.jp/> about Mbase.
config TANBAC_TB0287
- bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
- depends on TANBAC_TB022X
+ bool "TANBAC Mini-ITX DIMM base(TB0287)"
+ select PCI_VR41XX
help
The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform
manufactured by TANBAC.
Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
-config VICTOR_MPC30X
- bool "Support for Victor MP-C303/304"
- depends on MACH_VR41XX
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config ZAO_CAPCELLA
- bool "Support for ZAO Networks Capcella"
- depends on MACH_VR41XX
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
+endchoice
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"