diff options
Diffstat (limited to 'arch/mips')
228 files changed, 8543 insertions, 12749 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 73455389257..a00fabe2e4e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -15,6 +15,29 @@ choice prompt "System type" default SGI_IP22 +config LEMOTE_FULONG + bool "Lemote Fulong mini-PC" + select ARCH_SPARSEMEM_ENABLE + select SYS_HAS_CPU_LOONGSON2 + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select HAVE_STD_PC_SERIAL_PORT + select HW_HAS_PCI + select I8259 + select ISA + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_HARDIRQS_NO__DO_IRQ + select CPU_HAS_WB + help + Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + config MACH_ALCHEMY bool "Alchemy processor based machines" @@ -63,7 +86,7 @@ config MACH_DECSTATION bool "DECstations" select BOOT_ELF32 select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK + select NO_IOPORT select IRQ_CPU select SYS_HAS_CPU_R3000 select SYS_HAS_CPU_R4X00 @@ -88,24 +111,6 @@ config MACH_DECSTATION otherwise choose R3000. -config MIPS_EV64120 - bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)" - depends on EXPERIMENTAL - select DMA_NONCOHERENT - select HW_HAS_PCI - select PCI_GT64XXX_PCI0 - select SYS_HAS_CPU_R5000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - help - This is an evaluation board based on the Galileo GT-64120 - single-chip system controller that contains a MIPS R5000 compatible - core running at 75/100MHz. Their website is located at - <http://www.marvell.com/>. Say Y here if you wish to build a - kernel for this platform. - config MACH_JAZZ bool "Jazz family of machines" select ARC @@ -126,20 +131,6 @@ config MACH_JAZZ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and Olivetti M700-10 workstations. -config LASAT - bool "LASAT Networks platforms" - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select HW_HAS_PCI - select PCI_GT64XXX_PCI0 - select MIPS_NILE4 - select R5000_CPU_SCACHE - select SYS_HAS_CPU_R5000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if BROKEN - select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - config MIPS_ATLAS bool "MIPS Atlas board" select BOOT_ELF32 @@ -173,7 +164,6 @@ config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 - select HAVE_STD_PC_SERIAL_PORT select DMA_NONCOHERENT select GENERIC_ISA_DMA select IRQ_CPU @@ -246,11 +236,13 @@ config MIPS_SIM select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK select IRQ_CPU + select BOOT_RAW select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_LITTLE_ENDIAN help This option enables support for MIPS Technologies MIPSsim software @@ -274,43 +266,6 @@ config MOMENCO_OCELOT The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. -config MOMENCO_OCELOT_3 - bool "Momentum Ocelot-3 board" - select BOOT_ELF32 - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select IRQ_MV64340 - select PCI_MARVELL - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_RM9000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - help - The Ocelot-3 is based off Discovery III System Controller and - PMC-Sierra Rm79000 core. - -config MOMENCO_OCELOT_C - bool "Momentum Ocelot-C board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_MV64340 - select PCI_MARVELL - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer <http://www.momenco.com/>. - config PNX8550_JBS bool "Philips PNX8550 based JBS board" select PNX8550 @@ -346,6 +301,27 @@ config MACH_VR41XX select SYS_HAS_CPU_VR41XX select GENERIC_HARDIRQS_NO__DO_IRQ +config PMC_MSP + bool "PMC-Sierra MSP chipsets" + depends on EXPERIMENTAL + select DMA_NONCOHERENT + select SWAP_IO_SPACE + select NO_EXCEPT_FILL + select BOOT_RAW + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB + select IRQ_CPU + select SERIAL_8250 + select SERIAL_8250_CONSOLE + help + This adds support for the PMC-Sierra family of Multi-Service + Processor System-On-A-Chips. These parts include a number + of integrated peripherals, interfaces and DSPs in addition to + a variety of MIPS cores. + config PMC_YOSEMITE bool "PMC-Sierra Yosemite eval board" select DMA_COHERENT @@ -450,8 +426,7 @@ config SGI_IP27 here. config SGI_IP32 - bool "SGI IP32 (O2) (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "SGI IP32 (O2)" select ARC select ARC32 select BOOT_ELF32 @@ -652,6 +627,7 @@ config TOSHIBA_RBTX4938 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_GPIO help This Toshiba board is based on the TX4938 processor. Say Y here to support this machine type @@ -660,9 +636,7 @@ endchoice source "arch/mips/au1000/Kconfig" source "arch/mips/ddb5xxx/Kconfig" -source "arch/mips/gt64120/ev64120/Kconfig" source "arch/mips/jazz/Kconfig" -source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" @@ -721,6 +695,9 @@ config ARC config ARCH_MAY_HAVE_PC_FDC bool +config BOOT_RAW + bool + config DMA_COHERENT bool @@ -768,16 +745,19 @@ config MIPS_BONITO64 config MIPS_MSC bool -config MIPS_NILE4 - bool - config MIPS_DISABLE_OBSOLETE_IDE bool +config NO_IOPORT + def_bool n + config GENERIC_ISA_DMA_SUPPORT_BROKEN bool select ZONE_DMA +config GENERIC_GPIO + bool + # # Endianess selection. Sufficiently obscure so many users don't know what to # answer,so we try hard to limit the available choices. Also the use of a @@ -821,7 +801,10 @@ config IRQ_CPU_RM7K config IRQ_CPU_RM9K bool -config IRQ_MV64340 +config IRQ_MSP_SLP + bool + +config IRQ_MSP_CIC bool config DDB5XXX_COMMON @@ -834,6 +817,9 @@ config MIPS_BOARDS_GEN config PCI_GT64XXX_PCI0 bool +config NO_EXCEPT_FILL + bool + config MIPS_TX3927 bool select HAS_TXX9_SERIAL @@ -841,14 +827,6 @@ config MIPS_TX3927 config MIPS_RM9122 bool select SERIAL_RM9000 - select GPI_RM9000 - select WDT_RM9000 - -config PCI_MARVELL - bool - -config SERIAL_RM9000 - bool config PNX8550 bool @@ -863,6 +841,7 @@ config SOC_PNX8550 select SYS_SUPPORTS_32BIT_KERNEL select GENERIC_HARDIRQS_NO__DO_IRQ select SYS_SUPPORTS_KGDB + select GENERIC_GPIO config SWAP_IO_SPACE bool @@ -875,31 +854,17 @@ config EMMA2RH config SERIAL_RM9000 bool -config GPI_RM9000 - bool - -config WDT_RM9000 - bool - # # Unfortunately not all GT64120 systems run the chip at the same clock. # As the user for the clock rate and try to minimize the available options. # choice prompt "Galileo Chip Clock" - #default SYSCLK_83 if MIPS_EV64120 - depends on MIPS_EV64120 || MOMENCO_OCELOT - default SYSCLK_83 if MIPS_EV64120 + depends on MOMENCO_OCELOT default SYSCLK_100 if MOMENCO_OCELOT -config SYSCLK_75 - bool "75" if MIPS_EV64120 - -config SYSCLK_83 - bool "83.3" if MIPS_EV64120 - config SYSCLK_100 - bool "100" if MIPS_EV64120 || MOMENCO_OCELOT + bool "100" if MOMENCO_OCELOT endchoice @@ -911,8 +876,9 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int - default "4" if MACH_DECSTATION || SNI_RM - default "7" if SGI_IP27 + default "4" if MACH_DECSTATION + default "7" if SGI_IP27 || SNI_RM + default "4" if PMC_MSP4200_EVAL default "5" config HAVE_STD_PC_SERIAL_PORT @@ -944,6 +910,16 @@ choice prompt "CPU type" default CPU_R4X00 +config CPU_LOONGSON2 + bool "Loongson 2" + depends on SYS_HAS_CPU_LOONGSON2 + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + help + The Loongson 2E processor implements the MIPS III instruction set + with many extensions. + config CPU_MIPS32_R1 bool "MIPS32 Release 1" depends on SYS_HAS_CPU_MIPS32_R1 @@ -1154,6 +1130,9 @@ config CPU_SB1 endchoice +config SYS_HAS_CPU_LOONGSON2 + bool + config SYS_HAS_CPU_MIPS32_R1 bool @@ -1488,6 +1467,15 @@ config CPU_HAS_SMARTMIPS config CPU_HAS_WB bool +config 64BIT_CONTEXT + bool "Save 64bit integer registers" + depends on 32BIT && CPU_LOONGSON2 + help + Loongson2 CPU is 64bit , when used in 32BIT mode, its integer + registers can still be accessed as 64bit, mainly for multimedia + instructions. We must have all 64bit save/restored to make sure + those instructions to get correct result. + # # Vectored interrupt mode is an R2 feature # diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 72d5c198e79..3efe117721a 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -37,7 +37,7 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. -config CONFIG_SMTC_IDLE_HOOK_DEBUG +config SMTC_IDLE_HOOK_DEBUG bool "Enable additional debug checks before going into CPU idle loop" depends on DEBUG_KERNEL && MIPS_MT_SMTC help diff --git a/arch/mips/Makefile b/arch/mips/Makefile index f450066b624..20d19c9b776 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -118,6 +118,7 @@ cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ @@ -283,14 +284,6 @@ load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000 CLEAN_FILES += drivers/tc/lk201-map.c # -# Galileo EV64120 Board -# -core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/ev64120/ -core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/common/ -cflags-$(CONFIG_MIPS_EV64120) += -Iinclude/asm-mips/mach-ev64120 -load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000 - -# # Wind River PPMC Board (4KC + GT64120) # core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/ @@ -298,6 +291,13 @@ cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # +# lemote fulong mini-PC board +# +core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/ +load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000 +cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote + +# # For all MIPS, Inc. eval boards # core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ @@ -327,7 +327,7 @@ load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000 # # MIPS SIM # -core-$(CONFIG_MIPS_SIM) += arch/mips/mips-boards/sim/ +core-$(CONFIG_MIPS_SIM) += arch/mips/mipssim/ cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim load-$(CONFIG_MIPS_SIM) += 0x80100000 @@ -343,12 +343,12 @@ cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000 # -# Momentum Ocelot-C and -CS boards +# PMC-Sierra MSP SOCs # -# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the -# mips_io_port_base. -core-$(CONFIG_MOMENCO_OCELOT_C) += arch/mips/momentum/ocelot_c/ -load-$(CONFIG_MOMENCO_OCELOT_C) += 0xffffffff80100000 +core-$(CONFIG_PMC_MSP) += arch/mips/pmc-sierra/msp71xx/ +cflags-$(CONFIG_PMC_MSP) += -Iinclude/asm-mips/pmc-sierra/msp71xx \ + -mno-branch-likely +load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 # # PMC-Sierra Yosemite @@ -365,13 +365,6 @@ cflags-$(CONFIG_QEMU) += -Iinclude/asm-mips/mach-qemu load-$(CONFIG_QEMU) += 0xffffffff80010000 # -# Momentum Ocelot-3 -# -core-$(CONFIG_MOMENCO_OCELOT_3) += arch/mips/momentum/ocelot_3/ -cflags-$(CONFIG_MOMENCO_OCELOT_3) += -Iinclude/asm-mips/mach-ocelot3 -load-$(CONFIG_MOMENCO_OCELOT_3) += 0xffffffff80100000 - -# # Basler eXcite # core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ @@ -389,10 +382,6 @@ core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/ core-$(CONFIG_DDB5477) += arch/mips/ddb5xxx/ddb5477/ load-$(CONFIG_DDB5477) += 0xffffffff80100000 -core-$(CONFIG_LASAT) += arch/mips/lasat/ -cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat -load-$(CONFIG_LASAT) += 0xffffffff80000000 - # # Common VR41xx # @@ -580,6 +569,7 @@ load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 # core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/toshiba_rbtx4927/ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/ +cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 # @@ -587,6 +577,7 @@ load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 # core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/ +cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000 cflags-y += -Iinclude/asm-mips/mach-generic @@ -603,7 +594,8 @@ JIFFIES = jiffies_64 endif AFLAGS += $(cflags-y) -CFLAGS += $(cflags-y) +CFLAGS += $(cflags-y) \ + -D"VMLINUX_LOAD_ADDRESS=$(load-y)" LDFLAGS += -m $(ld-emul) @@ -633,18 +625,11 @@ CPPFLAGS_vmlinux.lds := \ head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o libs-y += arch/mips/lib/ -libs-$(CONFIG_32BIT) += arch/mips/lib-32/ -libs-$(CONFIG_64BIT) += arch/mips/lib-64/ core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/ drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ -ifdef CONFIG_LASAT -rom.bin rom.sw: vmlinux - $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@ -endif - # # Some machines like the Indy need 32-bit ELF binaries for booting purposes. # Other need ECOFF, so we build a 32-bit ELF binary for them which we then @@ -702,32 +687,19 @@ vmlinux.srec: $(vmlinux-32) CLEAN_FILES += vmlinux.ecoff \ vmlinux.srec +archprepare: +ifdef CONFIG_MIPS32_N32 + @echo ' Checking missing-syscalls for N32' + $(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=n32" +endif +ifdef CONFIG_MIPS32_O32 + @echo ' Checking missing-syscalls for O32' + $(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=32" +endif + archclean: @$(MAKE) $(clean)=arch/mips/boot - @$(MAKE) $(clean)=arch/mips/lasat CLEAN_FILES += vmlinux.32 \ vmlinux.64 \ vmlinux.ecoff - -quiet_cmd_syscalls_n32 = CALL-N32 $< - cmd_syscalls_n32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=n32 - -quiet_cmd_syscalls_o32 = CALL-O32 $< - cmd_syscalls_o32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=32 - -PHONY += missing-syscalls-n32 missing-syscalls-o32 - -missing-syscalls-n32: scripts/checksyscalls.sh FORCE - $(call cmd,syscalls_n32) - -missing-syscalls-o32: scripts/checksyscalls.sh FORCE - $(call cmd,syscalls_o32) - -archprepare: -ifdef CONFIG_MIPS32_N32 - $(Q)$(MAKE) $(build)=arch/mips missing-syscalls-n32 -endif -ifdef CONFIG_MIPS32_O32 - $(Q)$(MAKE) $(build)=arch/mips missing-syscalls-o32 -endif diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index ce55297dcb8..7abe4209943 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -1,4 +1,7 @@ /* + * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org> + * Architecture specific GPIO support + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -18,101 +21,136 @@ * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Notes : + * au1000 SoC have only one GPIO line : GPIO1 + * others have a second one : GPIO2 */ + +#include <linux/autoconf.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/types.h> #include <linux/module.h> -#include <au1000.h> -#include <au1xxx_gpio.h> + +#include <asm/addrspace.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/gpio.h> #define gpio1 sys #if !defined(CONFIG_SOC_AU1000) -static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE; -#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 +static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE; +#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 -int au1xxx_gpio2_read(int signal) +static int au1xxx_gpio2_read(unsigned gpio) { - signal -= 200; -/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */ - return ((gpio2->pinstate >> signal) & 0x01); + gpio -= AU1XXX_GPIO_BASE; + return ((gpio2->pinstate >> gpio) & 0x01); } -void au1xxx_gpio2_write(int signal, int value) +static void au1xxx_gpio2_write(unsigned gpio, int value) { - signal -= 200; + gpio -= AU1XXX_GPIO_BASE; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) | - (value << signal); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); } -void au1xxx_gpio2_tristate(int signal) +static int au1xxx_gpio2_direction_input(unsigned gpio) { - signal -= 200; - gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */ + gpio -= AU1XXX_GPIO_BASE; + gpio2->dir &= ~(0x01 << gpio); + return 0; } -#endif -int au1xxx_gpio1_read(int signal) +static int au1xxx_gpio2_direction_output(unsigned gpio, int value) +{ + gpio -= AU1XXX_GPIO_BASE; + gpio2->dir = (0x01 << gpio) | (value << gpio); + return 0; +} + +#endif /* !defined(CONFIG_SOC_AU1000) */ + +static int au1xxx_gpio1_read(unsigned gpio) { -/* gpio1->trioutclr |= (0x01 << signal); */ - return ((gpio1->pinstaterd >> signal) & 0x01); + return ((gpio1->pinstaterd >> gpio) & 0x01); } -void au1xxx_gpio1_write(int signal, int value) +static void au1xxx_gpio1_write(unsigned gpio, int value) { - if(value) - gpio1->outputset = (0x01 << signal); + if (value) + gpio1->outputset = (0x01 << gpio); else - gpio1->outputclr = (0x01 << signal); /* Output a Zero */ + /* Output a zero */ + gpio1->outputclr = (0x01 << gpio); } -void au1xxx_gpio1_tristate(int signal) +static int au1xxx_gpio1_direction_input(unsigned gpio) { - gpio1->trioutclr = (0x01 << signal); /* Tristate signal */ + gpio1->pininputen = (0x01 << gpio); + return 0; } +static int au1xxx_gpio1_direction_output(unsigned gpio, int value) +{ + gpio1->trioutclr = (0x01 & gpio); + return 0; +} -int au1xxx_gpio_read(int signal) +int au1xxx_gpio_get_value(unsigned gpio) { - if(signal >= 200) + if (gpio >= AU1XXX_GPIO_BASE) #if defined(CONFIG_SOC_AU1000) return 0; #else - return au1xxx_gpio2_read(signal); + return au1xxx_gpio2_read(gpio); #endif else - return au1xxx_gpio1_read(signal); + return au1xxx_gpio1_read(gpio); } -void au1xxx_gpio_write(int signal, int value) +EXPORT_SYMBOL(au1xxx_gpio_get_value); + +void au1xxx_gpio_set_value(unsigned gpio, int value) { - if(signal >= 200) + if (gpio >= AU1XXX_GPIO_BASE) #if defined(CONFIG_SOC_AU1000) ; #else - au1xxx_gpio2_write(signal, value); + au1xxx_gpio2_write(gpio, value); #endif else - au1xxx_gpio1_write(signal, value); + au1xxx_gpio1_write(gpio, value); } -void au1xxx_gpio_tristate(int signal) +EXPORT_SYMBOL(au1xxx_gpio_set_value); + +int au1xxx_gpio_direction_input(unsigned gpio) { - if(signal >= 200) + if (gpio >= AU1XXX_GPIO_BASE) #if defined(CONFIG_SOC_AU1000) ; #else - au1xxx_gpio2_tristate(signal); + return au1xxx_gpio2_direction_input(gpio); #endif else - au1xxx_gpio1_tristate(signal); + return au1xxx_gpio1_direction_input(gpio); } -void au1xxx_gpio1_set_inputs(void) +EXPORT_SYMBOL(au1xxx_gpio_direction_input); + +int au1xxx_gpio_direction_output(unsigned gpio, int value) { - gpio1->pininputen = 0; + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + ; +#else + return au1xxx_gpio2_direction_output(gpio, value); +#endif + else + return au1xxx_gpio1_direction_output(gpio, value); } -EXPORT_SYMBOL(au1xxx_gpio1_set_inputs); -EXPORT_SYMBOL(au1xxx_gpio_tristate); -EXPORT_SYMBOL(au1xxx_gpio_write); -EXPORT_SYMBOL(au1xxx_gpio_read); +EXPORT_SYMBOL(au1xxx_gpio_direction_output); diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 8fd203d4a33..d51e18fb789 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -289,7 +289,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #endif }; -int au1xxx_platform_init(void) +int __init au1xxx_platform_init(void) { return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices)); } diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 39e251300c6..129e2c961fe 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set CONFIG_MIPS_ATLAS=y # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_MIPS_ATLAS=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 4713a13211c..dc3e1bf4e42 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 5e7ae56b1f3..4c7031222e6 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 631b2138ad6..c8c05785a86 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,44 +1,24 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc7 -# Wed Apr 18 14:25:45 2007 +# Linux kernel version: 2.6.22-rc2 +# Fri May 25 11:17:29 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set @@ -138,7 +118,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -178,6 +158,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y # CONFIG_BLK_DEV_INITRD is not set @@ -193,14 +174,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -233,16 +219,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -268,7 +251,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -300,11 +282,11 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -345,13 +327,16 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=y -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_SOFTMAC=y -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -370,10 +355,6 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -418,7 +399,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -445,16 +425,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -479,87 +456,145 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_CDROM_PKTCDVD=y -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # Misc devices # -CONFIG_SGI_IOC4=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -CONFIG_BLK_DEV_IT8213=y -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_BLK_DEV_TC86C001=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLINK is not set +# CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=y -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_ESP_CORE is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +CONFIG_PATA_VIA=y +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set # # Multi-device support (RAID and LVM) @@ -570,10 +605,14 @@ CONFIG_RAID_ATTRS=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # @@ -594,24 +633,7 @@ CONFIG_NETDEVICES=y # ARCnet devices # # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -639,35 +661,8 @@ CONFIG_TULIP=y # CONFIG_ULI526X is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=y -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=y -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Token Ring devices @@ -675,18 +670,16 @@ CONFIG_NETXEN_NIC=y # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -711,10 +704,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set @@ -726,18 +716,23 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +CONFIG_INPUT_COBALT_BTNS=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_INPUT_POLLDEV=y # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=y +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -754,7 +749,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -773,16 +768,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set CONFIG_COBALT_LCD=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set @@ -792,10 +782,7 @@ CONFIG_COBALT_LCD=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -808,12 +795,7 @@ CONFIG_COBALT_LCD=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # # Multifunction device drivers @@ -824,16 +806,19 @@ CONFIG_COBALT_LCD=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -868,10 +853,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -912,18 +893,30 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -937,14 +930,6 @@ CONFIG_RTC_DRV_CMOS=y # # -# Auxiliary Display support -# - -# -# Virtualization -# - -# # File systems # CONFIG_EXT2_FS=y @@ -952,8 +937,13 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -969,7 +959,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=y +# CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # @@ -1003,7 +993,6 @@ CONFIG_CONFIGFS_FS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1021,13 +1010,23 @@ CONFIG_CONFIGFS_FS=y # Network File Systems # CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1051,10 +1050,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=y -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -1072,72 +1068,30 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_WP512=y -CONFIG_CRYPTO_TGR192=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_SERPENT=y -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_CAST5=y -CONFIG_CRYPTO_CAST6=y -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_ANUBIS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CAMELLIA=y - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 10f6af43753..ec60beb888b 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -26,9 +26,7 @@ CONFIG_MIPS_DB1000=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 4b086292774..f3c25f08bfa 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -26,9 +26,7 @@ CONFIG_MIPS_DB1100=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 820659e810d..6d400befbac 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -26,9 +26,7 @@ CONFIG_MIPS_DB1200=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 4050b9b91bc..82aea6e0882 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -26,9 +26,7 @@ CONFIG_MIPS_DB1500=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 7b3519058ab..82697714a9e 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -26,9 +26,7 @@ CONFIG_MIPS_DB1550=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index 5b502a2013f..a42ab9ae7d4 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 4bbdab078ff..d6e3fffbc80 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_MACH_DECSTATION=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index b5714a6a539..78f5004fb72 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index 2e3e155b4c5..b29bff0f56c 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig deleted file mode 100644 index c10e4e06322..00000000000 --- a/arch/mips/configs/ev64120_defconfig +++ /dev/null @@ -1,985 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:30 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -CONFIG_MIPS_EV64120=y -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_EVB_PCI1 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_MIPS_GT64120=y -# CONFIG_SYSCLK_75 is not set -# CONFIG_SYSCLK_83 is not set -CONFIG_SYSCLK_100=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -CONFIG_CPU_R5000=y -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R5000=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_KMOD is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=y -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=y -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PPP_DEFLATE is not set -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=y -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::" -CONFIG_SYS_SUPPORTS_KGDB=y - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=m -CONFIG_CRC_CCITT=y -CONFIG_CRC16=m -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 460d7a26a8b..69810592aa6 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -26,9 +26,7 @@ CONFIG_BASLER_EXCITE=y # CONFIG_BASLER_EXCITE_PROTOTYPE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig new file mode 100644 index 00000000000..6ab94d8cf08 --- /dev/null +++ b/arch/mips/configs/fulong_defconfig @@ -0,0 +1,1765 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Mon Jun 11 00:23:51 2007 +# +CONFIG_MIPS=y + +# +# Machine selection +# +CONFIG_LEMOTE_FULONG=y +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_WR_PPMC is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_DDB5477 is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_QEMU is not set +# CONFIG_MARKEINS is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_I8259=y +# CONFIG_NO_IOPORT is not set +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +CONFIG_CPU_LOONGSON2=y +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_LOONGSON2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +# CONFIG_32BIT is not set +CONFIG_64BIT=y +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_BOARD_SCACHE=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_VPE_LOADER is not set +CONFIG_CPU_HAS_WB=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="lm32" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ISA=y +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +# CONFIG_BUILD_ELF64 is not set +CONFIG_MIPS32_COMPAT=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_BINFMT_ELF32=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI_STAA=m +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x1fc00000 +CONFIG_MTD_PHYSMAP_LEN=0x80000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m + +# +# Misc devices +# +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=y +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_TC35815 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_NET_FC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_SERIAL=y +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +CONFIG_I2C_VIAPRO=m +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DPC is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +CONFIG_USB_ET61X251=m +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +CONFIG_USB_ZC0301=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_USB_DSBR is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +CONFIG_FB_RADEON=y +# CONFIG_FB_RADEON_I2C is not set +CONFIG_FB_RADEON_BACKLIGHT=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_SMIVGX is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_RTCTIMER=m +CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +CONFIG_SND_VIA82XX=m +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# ALSA MIPS devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=y +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=936 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp936" +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_DEBUG2=y +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +CONFIG_NLS_CODEPAGE_936=y +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 7ec618f3c8b..405c9f505a7 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 9ddc3eff479..a9dcbcf563c 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 8fc18809d5f..a040459bec1 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 9331cb0a19b..dd04eece9fd 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set CONFIG_MACH_JAZZ=y -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_MACH_JAZZ=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 1b364cf6914..9a25e770abd 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig deleted file mode 100644 index fd4272c1458..00000000000 --- a/arch/mips/configs/lasat200_defconfig +++ /dev/null @@ -1,1118 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:34 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MACH_JAZZ is not set -CONFIG_LASAT=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_PICVUE=y -CONFIG_PICVUE_PROC=y -CONFIG_DS1603=y -CONFIG_LASAT_SYSCTL=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_MIPS_NILE4=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_MIPS_GT64120=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -CONFIG_CPU_R5000=y -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R5000=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_R5000_CPU_SCACHE=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_LASAT=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -CONFIG_BLK_DEV_IT8213=m -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_TC86C001=m -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 1f64d7632a0..546cb243fd0 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set CONFIG_MIPS_MALTA=y # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_MIPS_MALTA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index a2db5c20121..6abad6f8831 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y CONFIG_MIPS_SIM=y # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set @@ -496,36 +492,23 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_MIPS_SIM_NET=y +# CONFIG_DM9000 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index ad5c0bf87b2..4981ce425d8 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/msp71xx_defconfig index 28547313ce1..adca5f7ba53 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:35 2007 +# Linux kernel version: 2.6.21-rc4 +# Thu Apr 26 18:11:29 2007 # CONFIG_MIPS=y @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,14 +33,13 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -CONFIG_MOMENCO_OCELOT_3=y -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set +CONFIG_PMC_MSP=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set # CONFIG_MARKEINS is not set @@ -62,6 +59,16 @@ CONFIG_MOMENCO_OCELOT_3=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_PMC_MSP4200_EVAL is not set +# CONFIG_PMC_MSP4200_GW is not set +# CONFIG_PMC_MSP7120_EVAL is not set +CONFIG_PMC_MSP7120_GW=y +# CONFIG_PMC_MSP7120_FPGA is not set + +# +# Options for PMC-Sierra MSP chipsets +# +CONFIG_PMC_MSP_EMBEDDED_ROOTFS=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -71,24 +78,24 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_BOOT_RAW=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_NO_EXCEPT_FILL=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_IRQ_CPU=y -CONFIG_IRQ_CPU_RM7K=y -CONFIG_IRQ_MV64340=y -CONFIG_PCI_MARVELL=y +CONFIG_IRQ_MSP_CIC=y +CONFIG_MSP_USB=y CONFIG_SWAP_IO_SPACE=y -CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # # CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set +CONFIG_CPU_MIPS32_R2=y # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set @@ -104,14 +111,14 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_R8000 is not set # CONFIG_CPU_R10000 is not set # CONFIG_CPU_RM7000 is not set -CONFIG_CPU_RM9000=y +# CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM9000=y -CONFIG_WEAK_ORDERING=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR2=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -122,13 +129,12 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set +CONFIG_SYS_SUPPORTS_MULTITHREADING=y # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -149,15 +155,16 @@ CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y +CONFIG_HZ=250 +# CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_BKL is not set # CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y @@ -168,14 +175,15 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-pmc" CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y +# CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y @@ -184,15 +192,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y +# CONFIG_IKCONFIG is not set CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -201,11 +210,11 @@ CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_SHMEM=y +# CONFIG_SHMEM is not set CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set +CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -232,8 +241,8 @@ CONFIG_BLOCK=y # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set @@ -245,6 +254,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_PCI_DEBUG is not set CONFIG_MMU=y # @@ -267,10 +277,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -281,17 +288,16 @@ CONFIG_NET=y # Networking options # # CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +# CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y @@ -300,122 +306,92 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -CONFIG_IPV6_MIP6=y +# CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -# CONFIG_IPV6_TUNNEL is not set -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +CONFIG_NETFILTER_XTABLES=y +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set +CONFIG_IP_NF_IPTABLES=y +# CONFIG_IP_NF_MATCH_IPRANGE is not set +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# Bridge: Netfilter Configuration # -CONFIG_NF_CONNTRACK_IPV6=m -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set # # DCCP Configuration (EXPERIMENTAL) @@ -432,9 +408,10 @@ CONFIG_NF_CONNTRACK_IPV6=m # # CONFIG_TIPC is not set # CONFIG_ATM is not set -# CONFIG_BRIDGE is not set +CONFIG_BRIDGE=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -447,7 +424,6 @@ CONFIG_NF_CONNTRACK_IPV6=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -456,14 +432,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_IEEE80211 is not set CONFIG_WIRELESS_EXT=y -CONFIG_FIB_RULES=y # # Device Drivers @@ -473,19 +443,101 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=m +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PMC_MSP_EVM=y +CONFIG_MSP_FLASH_MAP_LIMIT_32M=y +CONFIG_MSP_FLASH_MAP_LIMIT=0x02000000 +CONFIG_MTD_PMC_MSP_RAMROOT=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -505,19 +557,21 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set # # Misc devices # -CONFIG_SGI_IOC4=m +# CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # @@ -528,16 +582,16 @@ CONFIG_SGI_IOC4=m # # SCSI device support # -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -CONFIG_SCSI_NETLINK=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # -# CONFIG_BLK_DEV_SD is not set +CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -550,22 +604,21 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y +# CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # -CONFIG_ISCSI_TCP=m +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -573,8 +626,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set @@ -630,10 +682,10 @@ CONFIG_SCSI_AIC94XX=m # Network device support # CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set +CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=m +# CONFIG_TUN is not set # # ARCnet devices @@ -643,26 +695,16 @@ CONFIG_TUN=m # # PHY device support # -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_MSPETH=y +CONFIG_MSPETH_NAPI=y +# CONFIG_MSPETH_SKB_RECYCLE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -674,26 +716,7 @@ CONFIG_MII=y # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -709,22 +732,20 @@ CONFIG_E100=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_MV643XX_ETH=y -CONFIG_QLA3XXX=m +# CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -734,7 +755,29 @@ CONFIG_NETXEN_NIC=m # # Wireless LAN (non-hamradio) # -# CONFIG_NET_RADIO is not set +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y # # Wan interfaces @@ -742,17 +785,17 @@ CONFIG_NETXEN_NIC=m # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -CONFIG_PPP=m +CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m +CONFIG_SLHC=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set @@ -796,31 +839,24 @@ CONFIG_INPUT=y # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_PMCMSP_GPIO=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -830,8 +866,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # IPMI @@ -843,7 +878,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_RTC=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -858,7 +894,58 @@ CONFIG_RTC=y # # I2C support # -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set +CONFIG_I2C_PMCMSP=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +CONFIG_PMCTWILED=y +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support @@ -874,8 +961,57 @@ CONFIG_RTC=y # # Hardware Monitoring support # -# CONFIG_HWMON is not set +CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -886,62 +1022,13 @@ CONFIG_RTC=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB is not set # # Sound @@ -960,13 +1047,134 @@ CONFIG_HID=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -1030,37 +1238,22 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y +# CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1071,22 +1264,25 @@ CONFIG_GENERIC_ACL=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1097,8 +1293,21 @@ CONFIG_CONFIGFS_FS=m # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set -CONFIG_EFS_FS=y -CONFIG_CRAMFS=y +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_SQUASHFS_VMALLOC=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -1108,26 +1317,9 @@ CONFIG_CRAMFS=y # # Network File Systems # -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1143,9 +1335,9 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -1169,7 +1361,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1187,10 +1379,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Distributed Lock Manager # -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -1203,14 +1392,40 @@ CONFIG_DLM_TCP=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="ip=any root=nfs" +CONFIG_CMDLINE="" +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB is not set +CONFIG_SYS_SUPPORTS_KGDB=y +# CONFIG_RUNTIME_DEBUG is not set +# CONFIG_MIPS_UNCACHED is not set # # Security options @@ -1223,41 +1438,40 @@ CONFIG_CMDLINE="ip=any root=nfs" # CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=y +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # @@ -1268,16 +1482,12 @@ CONFIG_CRYPTO_CAMELLIA=m # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig deleted file mode 100644 index 82ff6fc0cd4..00000000000 --- a/arch/mips/configs/ocelot_c_defconfig +++ /dev/null @@ -1,982 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:36 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -CONFIG_MOMENCO_OCELOT_C=y -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_MV64340=y -CONFIG_PCI_MARVELL=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -CONFIG_CPU_RM7000=y -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM7000=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -# CONFIG_32BIT is not set -CONFIG_64BIT=y -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_RM7000_CPU_SCACHE=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set -CONFIG_MIPS32_COMPAT=y -CONFIG_COMPAT=y -CONFIG_SYSVIPC_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_BINFMT_ELF32=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=y -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_SOFTMAC=y -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=y -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=y - -# -# Misc devices -# -CONFIG_SGI_IOC4=y -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=y -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set -CONFIG_QLA3XXX=y -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=y -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=y - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=y -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=y -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=y -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_WP512=y -CONFIG_CRYPTO_TGR192=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_SERPENT=y -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_CAST5=y -CONFIG_CRYPTO_CAST6=y -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_ANUBIS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CAMELLIA=y - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y -CONFIG_CRC32=y -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index 15a027e00ee..e1db1fb80cd 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set CONFIG_MOMENCO_OCELOT=y -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 37d696c6454..0028aef0af9 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -26,9 +26,7 @@ CONFIG_MIPS_PB1100=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index b11f0e8b605..8a1d5888739 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -26,9 +26,7 @@ CONFIG_MIPS_PB1500=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 2927f38f490..5581ad2ca41 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -26,9 +26,7 @@ CONFIG_MIPS_PB1550=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -36,8 +34,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index fae16c5ec52..821c1cee563 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set CONFIG_PNX8550_JBS=y diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index cd821e52181..0e8bd92b38c 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 8e8d0315795..6cca105832c 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index 35d64260917..20a38526d48 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -24,17 +24,13 @@ CONFIG_MIPS=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 41011f770a6..5dbb250f71c 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:39 2007 +# Linux kernel version: 2.6.22-rc5 +# Fri Jun 22 21:39:45 2007 # CONFIG_MIPS=y @@ -9,40 +9,23 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set # CONFIG_MARKEINS is not set @@ -82,6 +65,8 @@ CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_GENERIC_ISA_DMA=y CONFIG_I8259=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y @@ -93,6 +78,7 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -149,12 +135,12 @@ CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -186,28 +172,35 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -244,17 +237,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -266,10 +254,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -279,14 +264,9 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -294,7 +274,7 @@ CONFIG_IP_MULTICAST=y CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y # CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -305,130 +285,23 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -CONFIG_IPV6_MIP6=y +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -# CONFIG_IPV6_TUNNEL is not set -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_NF_CONNTRACK_IPV6=m -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -446,7 +319,6 @@ CONFIG_NF_CONNTRACK_IPV6=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -455,15 +327,16 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y -CONFIG_FIB_RULES=y +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -474,94 +347,13 @@ CONFIG_FIB_RULES=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set # # Parallel port support @@ -583,93 +375,30 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # -CONFIG_SGI_IOC4=m +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -CONFIG_BLK_DEV_IT8213=m -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_TC86C001=m -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLINK is not set +# CONFIG_IDE is not set # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -685,6 +414,7 @@ CONFIG_RAID_ATTRS=m # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # @@ -699,36 +429,15 @@ CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# +# CONFIG_TUN is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -747,6 +456,7 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set +CONFIG_TC35815=y # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set @@ -761,91 +471,20 @@ CONFIG_NET_PCI=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_IPW2100 is not set -CONFIG_IPW2200=m -# CONFIG_IPW2200_MONITOR is not set -# CONFIG_IPW2200_QOS is not set -# CONFIG_IPW2200_DEBUG is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_HOSTAP is not set -# CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -864,57 +503,18 @@ CONFIG_SLHC=m # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports # -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -926,11 +526,12 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y CONFIG_SERIAL_TXX9_NR_UARTS=6 -# CONFIG_SERIAL_TXX9_CONSOLE is not set -# CONFIG_SERIAL_TXX9_STDSERIAL is not set +CONFIG_SERIAL_TXX9_CONSOLE=y +CONFIG_SERIAL_TXX9_STDSERIAL=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -940,15 +541,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set @@ -958,108 +554,61 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y # -# I2C support +# SPI Master Controller Drivers # -# CONFIG_I2C is not set +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_TXX9=y # -# SPI support +# SPI Protocol Masters # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI_AT25=y +# CONFIG_SPI_SPIDEV is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -CONFIG_FB_ATY=y -CONFIG_FB_ATY_CT=y -# CONFIG_FB_ATY_GENERIC_LCD is not set -# CONFIG_FB_ATY_GX is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set # -# HID Devices +# Sound # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +# CONFIG_SOUND is not set # # USB support @@ -1067,148 +616,80 @@ CONFIG_HID=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -CONFIG_USB_YEALINK=m -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers +# USB Gadget Support # +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set # -# USB Serial Converter support +# LED devices # -# CONFIG_USB_SERIAL is not set +# CONFIG_NEW_LEDS is not set # -# USB Miscellaneous drivers +# LED drivers # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set # -# USB DSL modem support +# LED Triggers # # -# USB Gadget Support +# InfiniBand support # -# CONFIG_USB_GADGET is not set +# CONFIG_INFINIBAND is not set # -# MMC/SD Card support +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # -# CONFIG_MMC is not set # -# LED devices +# Real Time Clock # -# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# LED drivers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set # -# LED Triggers +# I2C RTC drivers # # -# InfiniBand support +# SPI RTC drivers # -# CONFIG_INFINIBAND is not set +CONFIG_RTC_DRV_RS5C348=y +# CONFIG_RTC_DRV_MAX6902 is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Real Time Clock +# on-CPU RTC drivers # -# CONFIG_RTC_CLASS is not set # # DMA Engine support @@ -1224,38 +705,15 @@ CONFIG_USB_MON=y # # -# Auxiliary Display support -# - -# -# Virtualization -# - -# # File systems # -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set +# CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set @@ -1265,26 +723,21 @@ CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -1298,7 +751,7 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1310,16 +763,7 @@ CONFIG_CONFIGFS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -1334,19 +778,16 @@ CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set +# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1362,54 +803,12 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +# CONFIG_NLS is not set # # Distributed Lock Manager # -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -1427,7 +826,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y @@ -1441,62 +839,17 @@ CONFIG_SYS_SUPPORTS_KGDB=y # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m +# CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 5593cde9f74..1a67a85aabb 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 6c4f09a381e..98a91409225 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 988b9cdef01..69c08b24c82 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set CONFIG_MIPS_SEAD=y @@ -35,8 +33,6 @@ CONFIG_MIPS_SEAD=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 8b1675c07ec..5d4fc0e4f72 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index b5be8b74d89..1b92b48de05 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 8bb6be4342b..5b77c7a5d83 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 8f019ffcc71..94a4f94a8b2 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 52b48c0715d..e38bd9b0ead 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_WR_PPMC=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 6824606309e..f1cdb12f792 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile index 23fd3b81fe1..4864b8a659c 100644 --- a/arch/mips/ddb5xxx/ddb5477/Makefile +++ b/arch/mips/ddb5xxx/ddb5477/Makefile @@ -2,7 +2,8 @@ # Makefile for NEC DDB-Vrc5477 board # -obj-y += irq.o irq_5477.o setup.o lcd44780.o +obj-y += ddb5477-platform.o irq.o irq_5477.o setup.o \ + lcd44780.o obj-$(CONFIG_RUNTIME_DEBUG) += debug.o obj-$(CONFIG_KGDB) += kgdb_io.o diff --git a/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c b/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c new file mode 100644 index 00000000000..c16020ad54c --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c @@ -0,0 +1,49 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/serial_8250.h> + +#include <asm/ddb5xxx/ddb5477.h> + +#define DDB_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) + +#define DDB5477_PORT(base, int) \ +{ \ + .mapbase = base, \ + .irq = int, \ + .uartclk = 1843200, \ + .iotype = UPIO_MEM, \ + .flags = DDB_UART_FLAGS, \ + .regshift = 3, \ +} + +static struct plat_serial8250_port uart8250_data[] = { + DDB5477_PORT(0xbfa04200, VRC5477_IRQ_UART0), + DDB5477_PORT(0xbfa04240, VRC5477_IRQ_UART1), + { }, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = uart8250_data, + }, +}; + +static int __init uart8250_init(void) +{ + return platform_device_register(&uart8250_device); +} + +module_init(uart8250_init); + +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("8250 UART probe driver for the NEC DDB5477"); diff --git a/arch/mips/dec/prom/console.c b/arch/mips/dec/prom/console.c index 65419bf3244..078e1a12421 100644 --- a/arch/mips/dec/prom/console.c +++ b/arch/mips/dec/prom/console.c @@ -3,7 +3,7 @@ * * DECstation PROM-based early console support. * - * Copyright (C) 2004 Maciej W. Rozycki + * Copyright (C) 2004, 2007 Maciej W. Rozycki * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -13,15 +13,35 @@ #include <linux/console.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/string.h> #include <asm/dec/prom.h> -void prom_putchar(char c) +static void __init prom_console_write(struct console *con, const char *s, + unsigned int c) { - char s[2]; + char buf[81]; + unsigned int chunk = sizeof(buf) - 1; - s[0] = c; - s[1] = '\0'; + while (c > 0) { + if (chunk > c) + chunk = c; + memcpy(buf, s, chunk); + buf[chunk] = '\0'; + prom_printf("%s", buf); + s += chunk; + c -= chunk; + } +} + +static struct console promcons __initdata = { + .name = "prom", + .write = prom_console_write, + .flags = CON_BOOT | CON_PRINTBUFFER, + .index = -1, +}; - prom_printf( s); +void __init register_prom_console(void) +{ + register_console(&promcons); } diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c index a217aafe59f..808c182fd3f 100644 --- a/arch/mips/dec/prom/init.c +++ b/arch/mips/dec/prom/init.c @@ -86,7 +86,7 @@ void __init which_prom(s32 magic, s32 *prom_vec) void __init prom_init(void) { - extern void ATTRIB_NORET dec_machine_halt(void); + extern void dec_machine_halt(void); static char cpu_msg[] __initdata = "Sorry, this kernel is compiled for a wrong CPU type!\n"; s32 argc = fw_arg0; @@ -103,6 +103,9 @@ void __init prom_init(void) if (prom_is_rex(magic)) rex_clear_cache(); + /* Register the early console. */ + register_prom_console(); + /* Were we compiled with the right CPU option? */ #if defined(CONFIG_CPU_R3000) if ((current_cpu_data.cputype == CPU_R4000SC) || diff --git a/arch/mips/dec/reset.c b/arch/mips/dec/reset.c index 56397227adb..c15a879046e 100644 --- a/arch/mips/dec/reset.c +++ b/arch/mips/dec/reset.c @@ -9,26 +9,26 @@ #include <asm/addrspace.h> -typedef void ATTRIB_NORET (* noret_func_t)(void); +typedef void __noreturn (* noret_func_t)(void); -static inline void ATTRIB_NORET back_to_prom(void) +static inline void __noreturn back_to_prom(void) { noret_func_t func = (void *)CKSEG1ADDR(0x1fc00000); func(); } -void ATTRIB_NORET dec_machine_restart(char *command) +void __noreturn dec_machine_restart(char *command) { back_to_prom(); } -void ATTRIB_NORET dec_machine_halt(void) +void __noreturn dec_machine_halt(void) { back_to_prom(); } -void ATTRIB_NORET dec_machine_power_off(void) +void __noreturn dec_machine_power_off(void) { /* DECstations don't have a software power switch */ back_to_prom(); diff --git a/arch/mips/defconfig b/arch/mips/defconfig index 41211f8b773..b3b6e58058f 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set @@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/gt64120/ev64120/Kconfig b/arch/mips/gt64120/ev64120/Kconfig deleted file mode 100644 index d691762cb0f..00000000000 --- a/arch/mips/gt64120/ev64120/Kconfig +++ /dev/null @@ -1,3 +0,0 @@ -config EVB_PCI1 - bool "Enable Second PCI (PCI1)" - depends on MIPS_EV64120 diff --git a/arch/mips/gt64120/ev64120/Makefile b/arch/mips/gt64120/ev64120/Makefile deleted file mode 100644 index 323b2cebc69..00000000000 --- a/arch/mips/gt64120/ev64120/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2000 RidgeRun, Inc. -# Author: RidgeRun, Inc. -# glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com -# -# Makefile for the Galileo EV64120 board. -# - -obj-y += irq.o promcon.o reset.o serialGT.o setup.o diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c deleted file mode 100644 index 64e4c80b613..00000000000 --- a/arch/mips/gt64120/ev64120/irq.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Code to handle irqs on GT64120A boards - * Derived from mips/orion and Cort <cort@fsmlabs.com> - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/gt64120.h> - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP4) /* int2 hardware line (timer) */ - do_IRQ(4); - else if (pending & STATUSF_IP2) /* int0 hardware line */ - do_IRQ(GT_INTA); - else if (pending & STATUSF_IP5) /* int3 hardware line */ - do_IRQ(GT_INTD); - else if (pending & STATUSF_IP6) /* int4 hardware line */ - do_IRQ(6); - else if (pending & STATUSF_IP7) /* compare int */ - do_IRQ(7); - else - spurious_interrupt(); -} - -static void disable_ev64120_irq(unsigned int irq_nr) -{ - if (irq_nr >= 8) { // All PCI interrupts are on line 5 or 2 - clear_c0_status(9 << 10); - } else { - clear_c0_status(1 << (irq_nr + 8)); - } -} - -static void enable_ev64120_irq(unsigned int irq_nr) -{ - if (irq_nr >= 8) // All PCI interrupts are on line 5 or 2 - set_c0_status(9 << 10); - else - set_c0_status(1 << (irq_nr + 8)); -} - -static void end_ev64120_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_ev64120_irq(irq); -} - -static struct irq_chip ev64120_irq_type = { - .name = "EV64120", - .ack = disable_ev64120_irq, - .mask = disable_ev64120_irq, - .mask_ack = disable_ev64120_irq, - .unmask = enable_ev64120_irq, - .end = end_ev64120_irq, -}; - -void gt64120_irq_setup(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - */ - clear_c0_status(ST0_IM); - - /* - * Enable timer. Other interrupts will be enabled as they are - * registered. - */ - set_c0_status(IE_IRQ2); -} - -void __init arch_init_irq(void) -{ - gt64120_irq_setup(); -} diff --git a/arch/mips/gt64120/ev64120/promcon.c b/arch/mips/gt64120/ev64120/promcon.c deleted file mode 100644 index 6e0ecfed964..00000000000 --- a/arch/mips/gt64120/ev64120/promcon.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Wrap-around code for a console using the - * SGI PROM io-routines. - * - * Copyright (c) 1999 Ulf Carlsson - * - * Derived from DECstation promcon.c - * Copyright (c) 1998 Harald Koerfgen - */ -#include <linux/tty.h> -#include <linux/init.h> -#include <linux/console.h> - -static void prom_console_write(struct console *co, const char *s, - unsigned count) -{ - extern int CONSOLE_CHANNEL; // The default serial port - unsigned i; - - for (i = 0; i < count; i++) { - if (*s == 10) - serial_putc(CONSOLE_CHANNEL, 13); - serial_putc(CONSOLE_CHANNEL, *s++); - } -} - -static struct console sercons = { - .name = "ttyS", - .write = prom_console_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * Register console. - */ - -static int gal_serial_console_init(void) -{ - // serial_init(); - //serial_set(115200); - - register_console(&sercons); - - return 0; -} - -console_initcall(gal_serial_console_init); diff --git a/arch/mips/gt64120/ev64120/reset.c b/arch/mips/gt64120/ev64120/reset.c deleted file mode 100644 index 7b9f5e5bf21..00000000000 --- a/arch/mips/gt64120/ev64120/reset.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997 Ralf Baechle - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> - -void galileo_machine_restart(char *command) -{ - *(volatile char *) 0xbc000000 = 0x0f; - /* - * Ouch, we're still alive ... This time we take the silver bullet ... - * ... and find that we leave the hardware in a state in which the - * kernel in the flush locks up somewhen during of after the PCI - * detection stuff. - */ - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -void galileo_machine_halt(void) -{ - printk(KERN_NOTICE "You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); - -} - -void galileo_machine_power_off(void) -{ - galileo_machine_halt(); -} diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c deleted file mode 100644 index 8f0d835491f..00000000000 --- a/arch/mips/gt64120/ev64120/serialGT.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * serialGT.c - * - * BRIEF MODULE DESCRIPTION - * Low Level Serial Port control for use - * with the Galileo EVB64120A MIPS eval board and - * its on board two channel 16552 Uart. - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -// Note: -// Serial CHANNELS - 0 is the bottom connector of evb64120A. -// (The one that maps to the "B" channel of the -// board's uart) -// 1 is the top connector of evb64120A. -// (The one that maps to the "A" channel of the -// board's uart) -int DEBUG_CHANNEL = 0; // See Note Above -int CONSOLE_CHANNEL = 1; // See Note Above - -#define DUART 0xBD000000 /* Base address of Uart. */ -#define CHANNELOFFSET 0x20 /* DUART+CHANNELOFFSET gets you to the ChanA - register set of the 16552 Uart device. - DUART+0 gets you to the ChanB register set. - */ -#define DUART_DELTA 0x4 -#define FIFO_ENABLE 0x07 -#define INT_ENABLE 0x04 /* default interrupt mask */ - -#define RBR 0x00 -#define THR 0x00 -#define DLL 0x00 -#define IER 0x01 -#define DLM 0x01 -#define IIR 0x02 -#define FCR 0x02 -#define LCR 0x03 -#define MCR 0x04 -#define LSR 0x05 -#define MSR 0x06 -#define SCR 0x07 - -#define LCR_DLAB 0x80 -#define XTAL 1843200 -#define LSR_THRE 0x20 -#define LSR_BI 0x10 -#define LSR_DR 0x01 -#define MCR_LOOP 0x10 -#define ACCESS_DELAY 0x10000 - -/****************************** - Routine: - Description: - ******************************/ -int inreg(int channel, int reg) -{ - int val; - val = - *((volatile unsigned char *) DUART + - (channel * CHANNELOFFSET) + (reg * DUART_DELTA)); - return val; -} - -/****************************** - Routine: - Description: - ******************************/ -void outreg(int channel, int reg, unsigned char val) -{ - *((volatile unsigned char *) DUART + (channel * CHANNELOFFSET) - + (reg * DUART_DELTA)) = val; -} - -/****************************** - Routine: - Description: - Initialize the device driver. - ******************************/ -void serial_init(int channel) -{ - /* - * Configure active port, (CHANNELOFFSET already set.) - * - * Set 8 bits, 1 stop bit, no parity. - * - * LCR<7> 0 divisor latch access bit - * LCR<6> 0 break control (1=send break) - * LCR<5> 0 stick parity (0=space, 1=mark) - * LCR<4> 0 parity even (0=odd, 1=even) - * LCR<3> 0 parity enable (1=enabled) - * LCR<2> 0 # stop bits (0=1, 1=1.5) - * LCR<1:0> 11 bits per character(00=5, 01=6, 10=7, 11=8) - */ - outreg(channel, LCR, 0x3); - - outreg(channel, FCR, FIFO_ENABLE); /* Enable the FIFO */ - - outreg(channel, IER, INT_ENABLE); /* Enable appropriate interrupts */ -} - -/****************************** - Routine: - Description: - Set the baud rate. - ******************************/ -void serial_set(int channel, unsigned long baud) -{ - unsigned char sav_lcr; - - /* - * Enable access to the divisor latches by setting DLAB in LCR. - * - */ - sav_lcr = inreg(channel, LCR); - -#if 0 - /* - * Set baud rate - */ - outreg(channel, LCR, LCR_DLAB | sav_lcr); - // outreg(DLL,(XTAL/(16*2*(baud))-2)); - outreg(channel, DLL, XTAL / (16 * baud)); - // outreg(DLM,(XTAL/(16*2*(baud))-2)>>8); - outreg(channel, DLM, (XTAL / (16 * baud)) >> 8); -#else - /* - * Note: Set baud rate, hardcoded here for rate of 115200 - * since became unsure of above "baud rate" algorithm (??). - */ - outreg(channel, LCR, 0x83); - outreg(channel, DLM, 0x00); // See note above - outreg(channel, DLL, 0x02); // See note above. - outreg(channel, LCR, 0x03); -#endif - - /* - * Restore line control register - */ - outreg(channel, LCR, sav_lcr); -} - - -/****************************** - Routine: - Description: - Transmit a character. - ******************************/ -void serial_putc(int channel, int c) -{ - while ((inreg(channel, LSR) & LSR_THRE) == 0); - outreg(channel, THR, c); -} - -/****************************** - Routine: - Description: - Read a received character if one is - available. Return -1 otherwise. - ******************************/ -int serial_getc(int channel) -{ - if (inreg(channel, LSR) & LSR_DR) { - return inreg(channel, RBR); - } - return -1; -} - -/****************************** - Routine: - Description: - Used by embedded gdb client. (example; gdb-stub.c) - ******************************/ -char getDebugChar() -{ - int val; - while ((val = serial_getc(DEBUG_CHANNEL)) == -1); // loop until we get a character in. - return (char) val; -} - -/****************************** - Routine: - Description: - Used by embedded gdb target. (example; gdb-stub.c) - ******************************/ -void putDebugChar(char c) -{ - serial_putc(DEBUG_CHANNEL, (int) c); -} diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c deleted file mode 100644 index 477848c22a2..00000000000 --- a/arch/mips/gt64120/ev64120/setup.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/timex.h> -#include <linux/pm.h> - -#include <asm/bootinfo.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/pci.h> -#include <asm/processor.h> -#include <asm/time.h> -#include <asm/reboot.h> -#include <asm/traps.h> -#include <linux/bootmem.h> - -unsigned long gt64120_base = KSEG1ADDR(0x14000000); - -/* These functions are used for rebooting or halting the machine*/ -extern void galileo_machine_restart(char *command); -extern void galileo_machine_halt(void); -extern void galileo_machine_power_off(void); -/* - *This structure holds pointers to the pci configuration space accesses - *and interrupts allocating routine for device over the PCI - */ -extern struct pci_ops galileo_pci_ops; - -void __init prom_free_prom_memory(void) -{ -} - -/* - * Initializes basic routines and structures pointers, memory size (as - * given by the bios and saves the command line. - */ - -void __init plat_mem_setup(void) -{ - _machine_restart = galileo_machine_restart; - _machine_halt = galileo_machine_halt; - pm_power_off = galileo_machine_power_off; - - set_io_port_base(KSEG1); -} - -const char *get_system_type(void) -{ - return "Galileo EV64120A"; -} - -/* - * Kernel arguments passed by the firmware - * - * $a0 - nothing - * $a1 - holds a pointer to the eprom parameters - * $a2 - nothing - */ - -void __init prom_init(void) -{ - mips_machgroup = MACH_GROUP_GALILEO; - mips_machtype = MACH_EV64120A; - - add_memory_region(0, 32 << 20, BOOT_MEM_RAM); -} diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile index 9f9a33fc76b..1df5fe23c64 100644 --- a/arch/mips/gt64120/momenco_ocelot/Makefile +++ b/arch/mips/gt64120/momenco_ocelot/Makefile @@ -2,6 +2,6 @@ # Makefile for Momentum's Ocelot board. # -obj-y += irq.o prom.o reset.o setup.o +obj-y += irq.o ocelot-platform.o prom.o reset.o setup.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c b/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c new file mode 100644 index 00000000000..81d9031a5a2 --- /dev/null +++ b/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * A NS16552 DUART with a 20MHz crystal. + * + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#define OCELOT_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) + +static struct plat_serial8250_port uart8250_data[] = { + { + .mapbase = 0xe0001020, + .irq = 4, + .uartclk = 20000000, + .iotype = UPIO_MEM, + .flags = OCELOT_UART_FLAGS, + .regshift = 2, + }, + { }, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = uart8250_data, + }, +}; + +static int __init uart8250_init(void) +{ + return platform_device_register(&uart8250_device); +} + +module_init(uart8250_init); + +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("8250 UART probe driver for the Momenco Ocelot"); diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c index 121188d5ec4..ea965529e5e 100644 --- a/arch/mips/gt64120/wrppmc/setup.c +++ b/arch/mips/gt64120/wrppmc/setup.c @@ -158,8 +158,8 @@ const char *get_system_type(void) */ void __init prom_init(void) { - mips_machgroup = MACH_GROUP_GALILEO; - mips_machtype = MACH_EV64120A; + mips_machgroup = MACH_GROUP_WINDRIVER; + mips_machtype = MACH_WRPPMC; add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM); add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA); diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile index dd9d99bfcf7..ae4c402b500 100644 --- a/arch/mips/jazz/Makefile +++ b/arch/mips/jazz/Makefile @@ -2,4 +2,4 @@ # Makefile for the Jazz family specific parts of the kernel # -obj-y := irq.o jazzdma.o reset.o setup.o +obj-y := irq.o jazzdma.o jazz-platform.o reset.o setup.o diff --git a/arch/mips/jazz/jazz-platform.c b/arch/mips/jazz/jazz-platform.c new file mode 100644 index 00000000000..fd736703eef --- /dev/null +++ b/arch/mips/jazz/jazz-platform.c @@ -0,0 +1,60 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/serial_8250.h> + +#include <asm/jazz.h> + +/* + * Confusion ... It seems the original Microsoft Jazz machine used to have a + * 4.096MHz clock for its UART while the MIPS Magnum and Millenium systems + * had 8MHz. The Olivetti M700-10 and the Acer PICA have 1.8432MHz like PCs. + */ +#ifdef CONFIG_OLIVETTI_M700 +#define JAZZ_BASE_BAUD 1843200 +#else +#define JAZZ_BASE_BAUD 8000000 /* 3072000 */ +#endif + +#define JAZZ_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) + +#define JAZZ_PORT(base, int) \ +{ \ + .mapbase = base, \ + .irq = int, \ + .uartclk = JAZZ_BASE_BAUD, \ + .iotype = UPIO_MEM, \ + .flags = JAZZ_UART_FLAGS, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[] = { + JAZZ_PORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ), + JAZZ_PORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ), + { }, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = uart8250_data, + }, +}; + +static int __init uart8250_init(void) +{ + return platform_device_register(&uart8250_device); +} + +module_init(uart8250_init); + +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("8250 UART probe driver for the Jazz family"); diff --git a/arch/mips/kernel/8250-platform.c b/arch/mips/kernel/8250-platform.c new file mode 100644 index 00000000000..cbf3fe20ad1 --- /dev/null +++ b/arch/mips/kernel/8250-platform.c @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#define PORT(base, int) \ +{ \ + .iobase = base, \ + .irq = int, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[] = { + PORT(0x3F8, 4), + PORT(0x2F8, 3), + PORT(0x3E8, 4), + PORT(0x2E8, 3), + { }, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = uart8250_data, + }, +}; + +static int __init uart8250_init(void) +{ + return platform_device_register(&uart8250_device); +} + +module_init(uart8250_init); + +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250 UART probe driver"); diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 49246264cc7..961594cb521 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -14,14 +14,15 @@ binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o +obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o -obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o -obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o -obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o @@ -29,13 +30,14 @@ obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_NEVADA) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R10000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_SB1) += r4k_fpu.o r4k_switch.o -obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o -obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o -obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o +obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_MIPS_MT) += mips-mt.o +obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o obj-$(CONFIG_MIPS_MT_SMTC) += smtc.o smtc-asm.o smtc-proc.o obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o @@ -47,7 +49,6 @@ obj-$(CONFIG_I8259) += i8259.o obj-$(CONFIG_IRQ_CPU) += irq_cpu.o obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o -obj-$(CONFIG_IRQ_MV64340) += irq-mv6434x.o obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o obj-$(CONFIG_32BIT) += scall32-o32.o @@ -68,3 +69,5 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) + +obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 0fc90ba16ae..c6b8b074a81 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -137,13 +137,24 @@ static inline void check_wait(void) case CPU_4KEC: case CPU_4KSC: case CPU_5KC: - case CPU_24K: case CPU_25KF: + case CPU_PR4450: + cpu_wait = r4k_wait; + break; + + case CPU_24K: case CPU_34K: + cpu_wait = r4k_wait; + if (read_c0_config7() & MIPS_CONF7_WII) + cpu_wait = r4k_wait_irqoff; + break; + case CPU_74K: - case CPU_PR4450: cpu_wait = r4k_wait; + if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) + cpu_wait = r4k_wait_irqoff; break; + case CPU_TX49XX: cpu_wait = r4k_wait_irqoff; break; @@ -175,9 +186,29 @@ static inline void check_wait(void) } } +static inline void check_errata(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + switch (c->cputype) { + case CPU_34K: + /* + * Erratum "RPS May Cause Incorrect Instruction Execution" + * This code only handles VPE0, any SMP/SMTC/RTOS code + * making use of VPE1 will be responsable for that VPE. + */ + if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2) + write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS); + break; + default: + break; + } +} + void __init check_bugs32(void) { check_wait(); + check_errata(); } /* @@ -474,6 +505,14 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) MIPS_CPU_LLSC; c->tlbsize = 64; break; + case PRID_IMP_LOONGSON2: + c->cputype = CPU_LOONGSON2; + c->isa_level = MIPS_CPU_ISA_III; + c->options = R4K_OPTS | + MIPS_CPU_FPU | MIPS_CPU_LLSC | + MIPS_CPU_32FPR; + c->tlbsize = 64; + break; } } @@ -577,6 +616,8 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c) c->options |= MIPS_CPU_VEIC; if (config3 & MIPS_CONF3_MT) c->ases |= MIPS_ASE_MIPSMT; + if (config3 & MIPS_CONF3_ULRI) + c->options |= MIPS_CPU_ULRI; return config3 & MIPS_CONF_M; } diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 6f57ca44291..f78538eceef 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/threads.h> +#include <asm/addrspace.h> #include <asm/asm.h> #include <asm/asmmacro.h> #include <asm/irqflags.h> @@ -129,24 +130,25 @@ #endif .endm +#ifndef CONFIG_NO_EXCEPT_FILL /* * Reserved space for exception handlers. * Necessary for machines which link their kernels at KSEG0. */ .fill 0x400 +#endif EXPORT(stext) # used for profiling EXPORT(_stext) -#ifdef CONFIG_MIPS_SIM +#ifdef CONFIG_BOOT_RAW /* * Give us a fighting chance of running if execution beings at the * kernel load address. This is needed because this platform does * not have a ELF loader yet. */ - j kernel_entry -#endif __INIT +#endif NESTED(kernel_entry, 16, sp) # kernel entry point @@ -197,9 +199,7 @@ NESTED(kernel_entry, 16, sp) # kernel entry point j start_kernel END(kernel_entry) -#ifdef CONFIG_QEMU __INIT -#endif #ifdef CONFIG_SMP /* diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c deleted file mode 100644 index 3dd561832e4..00000000000 --- a/arch/mips/kernel/irq-mv6434x.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright 2002 Momentum Computer - * Author: mdharm@momenco.com - * Copyright (C) 2004, 06 Ralf Baechle <ralf@linux-mips.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/kernel_stat.h> -#include <linux/mv643xx.h> -#include <linux/sched.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/marvell.h> - -static unsigned int irq_base; - -static inline int ls1bit32(unsigned int x) -{ - int b = 31, s; - - s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s; - s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s; - s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s; - s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s; - s = 1; if (x << 1 == 0) s = 0; b -= s; - - return b; -} - -/* mask off an interrupt -- 1 is enable, 0 is disable */ -static inline void mask_mv64340_irq(unsigned int irq) -{ - uint32_t value; - - if (irq < (irq_base + 32)) { - value = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW); - value &= ~(1 << (irq - irq_base)); - MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value); - } else { - value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH); - value &= ~(1 << (irq - irq_base - 32)); - MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value); - } -} - -/* unmask an interrupt -- 1 is enable, 0 is disable */ -static inline void unmask_mv64340_irq(unsigned int irq) -{ - uint32_t value; - - if (irq < (irq_base + 32)) { - value = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW); - value |= 1 << (irq - irq_base); - MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value); - } else { - value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH); - value |= 1 << (irq - irq_base - 32); - MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value); - } -} - -/* - * Interrupt handler for interrupts coming from the Marvell chip. - * It could be built in ethernet ports etc... - */ -void ll_mv64340_irq(void) -{ - unsigned int irq_src_low, irq_src_high; - unsigned int irq_mask_low, irq_mask_high; - - /* read the interrupt status registers */ - irq_mask_low = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW); - irq_mask_high = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH); - irq_src_low = MV_READ(MV64340_MAIN_INTERRUPT_CAUSE_LOW); - irq_src_high = MV_READ(MV64340_MAIN_INTERRUPT_CAUSE_HIGH); - - /* mask for just the interrupts we want */ - irq_src_low &= irq_mask_low; - irq_src_high &= irq_mask_high; - - if (irq_src_low) - do_IRQ(ls1bit32(irq_src_low) + irq_base); - else - do_IRQ(ls1bit32(irq_src_high) + irq_base + 32); -} - -struct irq_chip mv64340_irq_type = { - .name = "MV-64340", - .ack = mask_mv64340_irq, - .mask = mask_mv64340_irq, - .mask_ack = mask_mv64340_irq, - .unmask = unmask_mv64340_irq, -}; - -void __init mv64340_irq_init(unsigned int base) -{ - int i; - - for (i = base; i < base + 64; i++) - set_irq_chip_and_handler(i, &mv64340_irq_type, - handle_level_irq); - - irq_base = base; -} diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c new file mode 100644 index 00000000000..ede5d73d652 --- /dev/null +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -0,0 +1,176 @@ +/* + * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels + * Copyright (C) 2005 Mips Technologies, Inc + */ +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/security.h> +#include <linux/types.h> +#include <asm/uaccess.h> + +/* + * CPU mask used to set process affinity for MT VPEs/TCs with FPUs + */ +cpumask_t mt_fpu_cpumask; + +static int fpaff_threshold = -1; +unsigned long mt_fpemul_threshold = 0; + +/* + * Replacement functions for the sys_sched_setaffinity() and + * sys_sched_getaffinity() system calls, so that we can integrate + * FPU affinity with the user's requested processor affinity. + * This code is 98% identical with the sys_sched_setaffinity() + * and sys_sched_getaffinity() system calls, and should be + * updated when kernel/sched.c changes. + */ + +/* + * find_process_by_pid - find a process with a matching PID value. + * used in sys_sched_set/getaffinity() in kernel/sched.c, so + * cloned here. + */ +static inline struct task_struct *find_process_by_pid(pid_t pid) +{ + return pid ? find_task_by_pid(pid) : current; +} + + +/* + * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process + */ +asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, + unsigned long __user *user_mask_ptr) +{ + cpumask_t new_mask; + cpumask_t effective_mask; + int retval; + struct task_struct *p; + + if (len < sizeof(new_mask)) + return -EINVAL; + + if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask))) + return -EFAULT; + + lock_cpu_hotplug(); + read_lock(&tasklist_lock); + + p = find_process_by_pid(pid); + if (!p) { + read_unlock(&tasklist_lock); + unlock_cpu_hotplug(); + return -ESRCH; + } + + /* + * It is not safe to call set_cpus_allowed with the + * tasklist_lock held. We will bump the task_struct's + * usage count and drop tasklist_lock before invoking + * set_cpus_allowed. + */ + get_task_struct(p); + + retval = -EPERM; + if ((current->euid != p->euid) && (current->euid != p->uid) && + !capable(CAP_SYS_NICE)) { + read_unlock(&tasklist_lock); + goto out_unlock; + } + + retval = security_task_setscheduler(p, 0, NULL); + if (retval) + goto out_unlock; + + /* Record new user-specified CPU set for future reference */ + p->thread.user_cpus_allowed = new_mask; + + /* Unlock the task list */ + read_unlock(&tasklist_lock); + + /* Compute new global allowed CPU set if necessary */ + if ((p->thread.mflags & MF_FPUBOUND) + && cpus_intersects(new_mask, mt_fpu_cpumask)) { + cpus_and(effective_mask, new_mask, mt_fpu_cpumask); + retval = set_cpus_allowed(p, effective_mask); + } else { + p->thread.mflags &= ~MF_FPUBOUND; + retval = set_cpus_allowed(p, new_mask); + } + + +out_unlock: + put_task_struct(p); + unlock_cpu_hotplug(); + return retval; +} + +/* + * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process + */ +asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, + unsigned long __user *user_mask_ptr) +{ + unsigned int real_len; + cpumask_t mask; + int retval; + struct task_struct *p; + + real_len = sizeof(mask); + if (len < real_len) + return -EINVAL; + + lock_cpu_hotplug(); + read_lock(&tasklist_lock); + + retval = -ESRCH; + p = find_process_by_pid(pid); + if (!p) + goto out_unlock; + retval = security_task_getscheduler(p); + if (retval) + goto out_unlock; + + cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map); + +out_unlock: + read_unlock(&tasklist_lock); + unlock_cpu_hotplug(); + if (retval) + return retval; + if (copy_to_user(user_mask_ptr, &mask, real_len)) + return -EFAULT; + return real_len; +} + + +static int __init fpaff_thresh(char *str) +{ + get_option(&str, &fpaff_threshold); + return 1; +} +__setup("fpaff=", fpaff_thresh); + +/* + * FPU Use Factor empirically derived from experiments on 34K + */ +#define FPUSEFACTOR 333 + +static __init int mt_fp_affinity_init(void) +{ + if (fpaff_threshold >= 0) { + mt_fpemul_threshold = fpaff_threshold; + } else { + mt_fpemul_threshold = + (FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ; + } + printk(KERN_DEBUG "FPU Affinity set after %ld emulations\n", + mt_fpemul_threshold); + + return 0; +} +arch_initcall(mt_fp_affinity_init); diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index ba01800b601..1a7d8923129 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -6,7 +6,6 @@ #include <linux/device.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/cpumask.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/security.h> @@ -23,149 +22,6 @@ #include <asm/cacheflush.h> /* - * CPU mask used to set process affinity for MT VPEs/TCs with FPUs - */ - -cpumask_t mt_fpu_cpumask; - -#ifdef CONFIG_MIPS_MT_FPAFF - -#include <linux/cpu.h> -#include <linux/delay.h> -#include <asm/uaccess.h> - -unsigned long mt_fpemul_threshold = 0; - -/* - * Replacement functions for the sys_sched_setaffinity() and - * sys_sched_getaffinity() system calls, so that we can integrate - * FPU affinity with the user's requested processor affinity. - * This code is 98% identical with the sys_sched_setaffinity() - * and sys_sched_getaffinity() system calls, and should be - * updated when kernel/sched.c changes. - */ - -/* - * find_process_by_pid - find a process with a matching PID value. - * used in sys_sched_set/getaffinity() in kernel/sched.c, so - * cloned here. - */ -static inline struct task_struct *find_process_by_pid(pid_t pid) -{ - return pid ? find_task_by_pid(pid) : current; -} - - -/* - * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process - */ -asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, - unsigned long __user *user_mask_ptr) -{ - cpumask_t new_mask; - cpumask_t effective_mask; - int retval; - struct task_struct *p; - - if (len < sizeof(new_mask)) - return -EINVAL; - - if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask))) - return -EFAULT; - - lock_cpu_hotplug(); - read_lock(&tasklist_lock); - - p = find_process_by_pid(pid); - if (!p) { - read_unlock(&tasklist_lock); - unlock_cpu_hotplug(); - return -ESRCH; - } - - /* - * It is not safe to call set_cpus_allowed with the - * tasklist_lock held. We will bump the task_struct's - * usage count and drop tasklist_lock before invoking - * set_cpus_allowed. - */ - get_task_struct(p); - - retval = -EPERM; - if ((current->euid != p->euid) && (current->euid != p->uid) && - !capable(CAP_SYS_NICE)) { - read_unlock(&tasklist_lock); - goto out_unlock; - } - - retval = security_task_setscheduler(p, 0, NULL); - if (retval) - goto out_unlock; - - /* Record new user-specified CPU set for future reference */ - p->thread.user_cpus_allowed = new_mask; - - /* Unlock the task list */ - read_unlock(&tasklist_lock); - - /* Compute new global allowed CPU set if necessary */ - if( (p->thread.mflags & MF_FPUBOUND) - && cpus_intersects(new_mask, mt_fpu_cpumask)) { - cpus_and(effective_mask, new_mask, mt_fpu_cpumask); - retval = set_cpus_allowed(p, effective_mask); - } else { - p->thread.mflags &= ~MF_FPUBOUND; - retval = set_cpus_allowed(p, new_mask); - } - - -out_unlock: - put_task_struct(p); - unlock_cpu_hotplug(); - return retval; -} - -/* - * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process - */ -asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, - unsigned long __user *user_mask_ptr) -{ - unsigned int real_len; - cpumask_t mask; - int retval; - struct task_struct *p; - - real_len = sizeof(mask); - if (len < real_len) - return -EINVAL; - - lock_cpu_hotplug(); - read_lock(&tasklist_lock); - - retval = -ESRCH; - p = find_process_by_pid(pid); - if (!p) - goto out_unlock; - retval = security_task_getscheduler(p); - if (retval) - goto out_unlock; - - cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map); - -out_unlock: - read_unlock(&tasklist_lock); - unlock_cpu_hotplug(); - if (retval) - return retval; - if (copy_to_user(user_mask_ptr, &mask, real_len)) - return -EFAULT; - return real_len; -} - -#endif /* CONFIG_MIPS_MT_FPAFF */ - -/* * Dump new MIPS MT state for the core. Does not leave TCs halted. * Takes an argument which taken to be a pre-call MVPControl value. */ @@ -195,27 +51,31 @@ void mips_mt_regdump(unsigned long mvpctl) nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; printk("-- per-VPE State --\n"); - for(i = 0; i < nvpe; i++) { - for(tc = 0; tc < ntc; tc++) { + for (i = 0; i < nvpe; i++) { + for (tc = 0; tc < ntc; tc++) { settc(tc); - if((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) { - printk(" VPE %d\n", i); - printk(" VPEControl : %08lx\n", read_vpe_c0_vpecontrol()); - printk(" VPEConf0 : %08lx\n", read_vpe_c0_vpeconf0()); - printk(" VPE%d.Status : %08lx\n", - i, read_vpe_c0_status()); - printk(" VPE%d.EPC : %08lx\n", i, read_vpe_c0_epc()); - printk(" VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause()); - printk(" VPE%d.Config7 : %08lx\n", - i, read_vpe_c0_config7()); - break; /* Next VPE */ + if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) { + printk(" VPE %d\n", i); + printk(" VPEControl : %08lx\n", + read_vpe_c0_vpecontrol()); + printk(" VPEConf0 : %08lx\n", + read_vpe_c0_vpeconf0()); + printk(" VPE%d.Status : %08lx\n", + i, read_vpe_c0_status()); + printk(" VPE%d.EPC : %08lx\n", + i, read_vpe_c0_epc()); + printk(" VPE%d.Cause : %08lx\n", + i, read_vpe_c0_cause()); + printk(" VPE%d.Config7 : %08lx\n", + i, read_vpe_c0_config7()); + break; /* Next VPE */ + } } - } } printk("-- per-TC State --\n"); - for(tc = 0; tc < ntc; tc++) { + for (tc = 0; tc < ntc; tc++) { settc(tc); - if(read_tc_c0_tcbind() == read_c0_tcbind()) { + if (read_tc_c0_tcbind() == read_c0_tcbind()) { /* Are we dumping ourself? */ haltval = 0; /* Then we're not halted, and mustn't be */ tcstatval = flags; /* And pre-dump TCStatus is flags */ @@ -310,17 +170,6 @@ static int __init ndflush(char *s) return 1; } __setup("ndflush=", ndflush); -#ifdef CONFIG_MIPS_MT_FPAFF -static int fpaff_threshold = -1; - -static int __init fpaff_thresh(char *str) -{ - get_option(&str, &fpaff_threshold); - return 1; -} - -__setup("fpaff=", fpaff_thresh); -#endif /* CONFIG_MIPS_MT_FPAFF */ static unsigned int itc_base = 0; @@ -376,20 +225,6 @@ void mips_mt_set_cpuoptions(void) if (mt_n_dflushes != 1) printk("D-Cache Flushes Repeated %d times\n", mt_n_dflushes); -#ifdef CONFIG_MIPS_MT_FPAFF - /* FPU Use Factor empirically derived from experiments on 34K */ -#define FPUSEFACTOR 333 - - if (fpaff_threshold >= 0) { - mt_fpemul_threshold = fpaff_threshold; - } else { - mt_fpemul_threshold = - (FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ; - } - printk("FPU Affinity set after %ld emulations\n", - mt_fpemul_threshold); -#endif /* CONFIG_MIPS_MT_FPAFF */ - if (itc_base != 0) { /* * Configure ITC mapping. This code is very diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 5ddc2e9deec..ec04f5a1a5e 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -14,7 +14,6 @@ #include <asm/cpu-features.h> #include <asm/mipsregs.h> #include <asm/processor.h> -#include <asm/watch.h> unsigned int vced_count, vcei_count; @@ -84,6 +83,7 @@ static const char *cpu_name[] = { [CPU_VR4181A] = "NEC VR4181A", [CPU_SR71000] = "Sandcraft SR71000", [CPU_PR4450] = "Philips PR4450", + [CPU_LOONGSON2] = "ICT Loongson-2", }; diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 6bdfb5a9fa1..8f4cf27c715 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -46,7 +46,7 @@ * power and have a low exit latency (ie sit in a loop waiting for somebody to * say that they'd like to reschedule) */ -ATTRIB_NORET void cpu_idle(void) +void __noreturn cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { @@ -213,7 +213,7 @@ int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr) /* * Create a kernel thread */ -static ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *)) +static void __noreturn kernel_thread_helper(void *arg, int (*fn)(void *)) { do_exit(fn(arg)); } diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 4975da0bfb6..316685fca05 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -20,6 +20,7 @@ #include <linux/highmem.h> #include <linux/console.h> #include <linux/pfn.h> +#include <linux/debugfs.h> #include <asm/addrspace.h> #include <asm/bootinfo.h> @@ -574,3 +575,18 @@ __setup("nodsp", dsp_disable); unsigned long kernelsp[NR_CPUS]; unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; + +#ifdef CONFIG_DEBUG_FS +struct dentry *mips_debugfs_dir; +static int __init debugfs_mips(void) +{ + struct dentry *d; + + d = debugfs_create_dir("mips", NULL); + if (IS_ERR(d)) + return PTR_ERR(d); + mips_debugfs_dir = d; + return 0; +} +arch_initcall(debugfs_mips); +#endif diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 67edfa7ed93..be7362bc2c9 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -51,18 +51,8 @@ int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */ EXPORT_SYMBOL(phys_cpu_present_map); EXPORT_SYMBOL(cpu_online_map); -/* This happens early in bootup, can't really do it better */ -static void smp_tune_scheduling (void) -{ - struct cache_desc *cd = ¤t_cpu_data.scache; - unsigned long cachesize = cd->linesz * cd->sets * cd->ways; - - if (cachesize > max_cache_size) - max_cache_size = cachesize; -} - extern void __init calibrate_delay(void); -extern ATTRIB_NORET void cpu_idle(void); +extern void cpu_idle(void); /* * First C code run on the secondary CPUs after being started up by @@ -228,7 +218,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { init_new_context(current, &init_mm); current_thread_info()->cpu = 0; - smp_tune_scheduling(); plat_prepare_cpus(max_cpus); #ifndef CONFIG_HOTPLUG_CPU cpu_present_map = cpu_possible_map; diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 046b03b1705..342d873b2ec 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1104,7 +1104,7 @@ void smtc_idle_loop_hook(void) mtflags = dmt(); pdb_msg = &id_ho_db_msg[0]; im = read_c0_status(); - vpe = cpu_data[smp_processor_id()].vpe_id; + vpe = current_cpu_data.vpe_id; for (bit = 0; bit < 8; bit++) { /* * In current prototype, I/O interrupts diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 9dd5a2df8ea..b947c61c0cc 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -272,9 +272,8 @@ asmlinkage int sys_set_thread_area(unsigned long addr) struct thread_info *ti = task_thread_info(current); ti->tp_value = addr; - - /* If some future MIPS implementation has this register in hardware, - * we will need to update it here (and in context switches). */ + if (cpu_has_userlocal) + write_c0_userlocal(addr); return 0; } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b1233644fcc..80ea4fa95bd 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -39,7 +39,6 @@ #include <asm/traps.h> #include <asm/uaccess.h> #include <asm/mmu_context.h> -#include <asm/watch.h> #include <asm/types.h> #include <asm/stacktrace.h> @@ -70,6 +69,7 @@ extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, int has_fpu); +void (*board_watchpoint_handler)(struct pt_regs *regs); void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); void (*board_nmi_handler_setup)(void); @@ -311,7 +311,7 @@ void show_registers(struct pt_regs *regs) static DEFINE_SPINLOCK(die_lock); -NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs) +void __noreturn die(const char * str, struct pt_regs * regs) { static int die_counter; #ifdef CONFIG_MIPS_MT_SMTC @@ -753,6 +753,33 @@ asmlinkage void do_ri(struct pt_regs *regs) force_sig(SIGILL, current); } +/* + * MIPS MT processors may have fewer FPU contexts than CPU threads. If we've + * emulated more than some threshold number of instructions, force migration to + * a "CPU" that has FP support. + */ +static void mt_ase_fp_affinity(void) +{ +#ifdef CONFIG_MIPS_MT_FPAFF + if (mt_fpemul_threshold > 0 && + ((current->thread.emulated_fp++ > mt_fpemul_threshold))) { + /* + * If there's no FPU present, or if the application has already + * restricted the allowed set to exclude any CPUs with FPUs, + * we'll skip the procedure. + */ + if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) { + cpumask_t tmask; + + cpus_and(tmask, current->thread.user_cpus_allowed, + mt_fpu_cpumask); + set_cpus_allowed(current, tmask); + current->thread.mflags |= MF_FPUBOUND; + } + } +#endif /* CONFIG_MIPS_MT_FPAFF */ +} + asmlinkage void do_cpu(struct pt_regs *regs) { unsigned int cpid; @@ -786,36 +813,8 @@ asmlinkage void do_cpu(struct pt_regs *regs) ¤t->thread.fpu, 0); if (sig) force_sig(sig, current); -#ifdef CONFIG_MIPS_MT_FPAFF - else { - /* - * MIPS MT processors may have fewer FPU contexts - * than CPU threads. If we've emulated more than - * some threshold number of instructions, force - * migration to a "CPU" that has FP support. - */ - if(mt_fpemul_threshold > 0 - && ((current->thread.emulated_fp++ - > mt_fpemul_threshold))) { - /* - * If there's no FPU present, or if the - * application has already restricted - * the allowed set to exclude any CPUs - * with FPUs, we'll skip the procedure. - */ - if (cpus_intersects(current->cpus_allowed, - mt_fpu_cpumask)) { - cpumask_t tmask; - - cpus_and(tmask, - current->thread.user_cpus_allowed, - mt_fpu_cpumask); - set_cpus_allowed(current, tmask); - current->thread.mflags |= MF_FPUBOUND; - } - } - } -#endif /* CONFIG_MIPS_MT_FPAFF */ + else + mt_ase_fp_affinity(); } return; @@ -835,6 +834,11 @@ asmlinkage void do_mdmx(struct pt_regs *regs) asmlinkage void do_watch(struct pt_regs *regs) { + if (board_watchpoint_handler) { + (*board_watchpoint_handler)(regs); + return; + } + /* * We use the watch exception where available to detect stack * overflows. @@ -1343,7 +1347,14 @@ void __init per_cpu_trap_init(void) set_c0_status(ST0_MX); #ifdef CONFIG_CPU_MIPSR2 - write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */ + if (cpu_has_mips_r2) { + unsigned int enable = 0x0000000f; + + if (cpu_has_userlocal) + enable |= (1 << 29); + + write_c0_hwrena(enable); + } #endif #ifdef CONFIG_MIPS_MT_SMTC @@ -1372,12 +1383,12 @@ void __init per_cpu_trap_init(void) */ if (cpu_has_mips_r2) { cp0_compare_irq = (read_c0_intctl () >> 29) & 7; - cp0_perfcount_irq = -1; - } else { - cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; cp0_perfcount_irq = (read_c0_intctl () >> 26) & 7; - if (cp0_perfcount_irq != cp0_compare_irq) + if (cp0_perfcount_irq == cp0_compare_irq) cp0_perfcount_irq = -1; + } else { + cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; + cp0_perfcount_irq = -1; } #ifdef CONFIG_MIPS_MT_SMTC diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 18c4a3c45a3..8b9c34ffae1 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -77,6 +77,7 @@ #include <linux/signal.h> #include <linux/smp.h> #include <linux/sched.h> +#include <linux/debugfs.h> #include <asm/asm.h> #include <asm/branch.h> #include <asm/byteorder.h> @@ -87,9 +88,18 @@ #define STR(x) __STR(x) #define __STR(x) #x -#ifdef CONFIG_PROC_FS -unsigned long unaligned_instructions; +enum { + UNALIGNED_ACTION_QUIET, + UNALIGNED_ACTION_SIGNAL, + UNALIGNED_ACTION_SHOW, +}; +#ifdef CONFIG_DEBUG_FS +static u32 unaligned_instructions; +static u32 unaligned_action; +#else +#define unaligned_action UNALIGNED_ACTION_QUIET #endif +extern void show_registers(struct pt_regs *regs); static inline int emulate_load_store_insn(struct pt_regs *regs, void __user *addr, unsigned int __user *pc, @@ -459,7 +469,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs, goto sigill; } -#ifdef CONFIG_PROC_FS +#ifdef CONFIG_DEBUG_FS unaligned_instructions++; #endif @@ -516,6 +526,10 @@ asmlinkage void do_ade(struct pt_regs *regs) pc = (unsigned int __user *) exception_epc(regs); if (user_mode(regs) && (current->thread.mflags & MF_FIXADE) == 0) goto sigbus; + if (unaligned_action == UNALIGNED_ACTION_SIGNAL) + goto sigbus; + else if (unaligned_action == UNALIGNED_ACTION_SHOW) + show_registers(regs); /* * Do branch emulation only if we didn't forward the exception. @@ -546,3 +560,24 @@ sigbus: * XXX On return from the signal handler we should advance the epc */ } + +#ifdef CONFIG_DEBUG_FS +extern struct dentry *mips_debugfs_dir; +static int __init debugfs_unaligned(void) +{ + struct dentry *d; + + if (!mips_debugfs_dir) + return -ENODEV; + d = debugfs_create_u32("unaligned_instructions", S_IRUGO, + mips_debugfs_dir, &unaligned_instructions); + if (IS_ERR(d)) + return PTR_ERR(d); + d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR, + mips_debugfs_dir, &unaligned_action); + if (IS_ERR(d)) + return PTR_ERR(d); + return 0; +} +__initcall(debugfs_unaligned); +#endif diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index c9ee9d2d585..9e66354dee8 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1436,10 +1436,6 @@ static int __init vpe_module_init(void) write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); if (i != 0) { - write_vpe_c0_status((read_c0_status() & - ~(ST0_IM | ST0_IE | ST0_KSU)) - | ST0_CU0); - /* * Set config to be the same as vpe0, * particularly kseg0 coherency alg diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig deleted file mode 100644 index 1d2ee8a9be1..00000000000 --- a/arch/mips/lasat/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -config PICVUE - tristate "PICVUE LCD display driver" - depends on LASAT - -config PICVUE_PROC - tristate "PICVUE LCD display driver /proc interface" - depends on PICVUE - -config DS1603 - bool "DS1603 RTC driver" - depends on LASAT - -config LASAT_SYSCTL - bool "LASAT sysctl interface" - depends on LASAT diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile deleted file mode 100644 index 99f5046fdf4..00000000000 --- a/arch/mips/lasat/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# Makefile for the LASAT specific kernel interface routines under Linux. -# - -obj-y += reset.o setup.o prom.o lasat_board.o \ - at93c.o interrupt.o - -obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o -obj-$(CONFIG_DS1603) += ds1603.o -obj-$(CONFIG_PICVUE) += picvue.o -obj-$(CONFIG_PICVUE_PROC) += picvue_proc.o - -clean: - make -C image clean diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c deleted file mode 100644 index ca26e554615..00000000000 --- a/arch/mips/lasat/at93c.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Atmel AT93C46 serial eeprom driver - * - * Brian Murphy <brian.murphy@eicon.com> - * - */ -#include <linux/kernel.h> -#include <linux/delay.h> -#include <asm/lasat/lasat.h> -#include <linux/module.h> -#include <linux/init.h> - -#include "at93c.h" - -#define AT93C_ADDR_SHIFT 7 -#define AT93C_ADDR_MAX ((1 << AT93C_ADDR_SHIFT) - 1) -#define AT93C_RCMD (0x6 << AT93C_ADDR_SHIFT) -#define AT93C_WCMD (0x5 << AT93C_ADDR_SHIFT) -#define AT93C_WENCMD 0x260 -#define AT93C_WDSCMD 0x200 - -struct at93c_defs *at93c; - -static void at93c_reg_write(u32 val) -{ - *at93c->reg = val; -} - -static u32 at93c_reg_read(void) -{ - u32 tmp = *at93c->reg; - return tmp; -} - -static u32 at93c_datareg_read(void) -{ - u32 tmp = *at93c->rdata_reg; - return tmp; -} - -static void at93c_cycle_clk(u32 data) -{ - at93c_reg_write(data | at93c->clk); - lasat_ndelay(250); - at93c_reg_write(data & ~at93c->clk); - lasat_ndelay(250); -} - -static void at93c_write_databit(u8 bit) -{ - u32 data = at93c_reg_read(); - if (bit) - data |= 1 << at93c->wdata_shift; - else - data &= ~(1 << at93c->wdata_shift); - - at93c_reg_write(data); - lasat_ndelay(100); - at93c_cycle_clk(data); -} - -static unsigned int at93c_read_databit(void) -{ - u32 data; - - at93c_cycle_clk(at93c_reg_read()); - data = (at93c_datareg_read() >> at93c->rdata_shift) & 1; - return data; -} - -static u8 at93c_read_byte(void) -{ - int i; - u8 data = 0; - - for (i = 0; i<=7; i++) { - data <<= 1; - data |= at93c_read_databit(); - } - return data; -} - -static void at93c_write_bits(u32 data, int size) -{ - int i; - int shift = size - 1; - u32 mask = (1 << shift); - - for (i = 0; i < size; i++) { - at93c_write_databit((data & mask) >> shift); - data <<= 1; - } -} - -static void at93c_init_op(void) -{ - at93c_reg_write((at93c_reg_read() | at93c->cs) & ~at93c->clk & ~(1 << at93c->rdata_shift)); - lasat_ndelay(50); -} - -static void at93c_end_op(void) -{ - at93c_reg_write(at93c_reg_read() & ~at93c->cs); - lasat_ndelay(250); -} - -static void at93c_wait(void) -{ - at93c_init_op(); - while (!at93c_read_databit()) - ; - at93c_end_op(); -}; - -static void at93c_disable_wp(void) -{ - at93c_init_op(); - at93c_write_bits(AT93C_WENCMD, 10); - at93c_end_op(); -} - -static void at93c_enable_wp(void) -{ - at93c_init_op(); - at93c_write_bits(AT93C_WDSCMD, 10); - at93c_end_op(); -} - -u8 at93c_read(u8 addr) -{ - u8 byte; - at93c_init_op(); - at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10); - byte = at93c_read_byte(); - at93c_end_op(); - return byte; -} - -void at93c_write(u8 addr, u8 data) -{ - at93c_disable_wp(); - at93c_init_op(); - at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10); - at93c_write_bits(data, 8); - at93c_end_op(); - at93c_wait(); - at93c_enable_wp(); -} diff --git a/arch/mips/lasat/at93c.h b/arch/mips/lasat/at93c.h deleted file mode 100644 index cfe2f99b1d4..00000000000 --- a/arch/mips/lasat/at93c.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Atmel AT93C46 serial eeprom driver - * - * Brian Murphy <brian.murphy@eicon.com> - * - */ - -extern struct at93c_defs { - volatile u32 *reg; - volatile u32 *rdata_reg; - int rdata_shift; - int wdata_shift; - u32 cs; - u32 clk; -} *at93c; - -u8 at93c_read(u8 addr); -void at93c_write(u8 addr, u8 data); diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c deleted file mode 100644 index 7dced67c55e..00000000000 --- a/arch/mips/lasat/ds1603.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Dallas Semiconductors 1603 RTC driver - * - * Brian Murphy <brian@murphy.dk> - * - */ -#include <linux/kernel.h> -#include <asm/lasat/lasat.h> -#include <linux/delay.h> -#include <asm/lasat/ds1603.h> -#include <asm/time.h> - -#include "ds1603.h" - -#define READ_TIME_CMD 0x81 -#define SET_TIME_CMD 0x80 -#define TRIMMER_SET_CMD 0xC0 -#define TRIMMER_VALUE_MASK 0x38 -#define TRIMMER_SHIFT 3 - -struct ds_defs *ds1603 = NULL; - -/* HW specific register functions */ -static void rtc_reg_write(unsigned long val) -{ - *ds1603->reg = val; -} - -static unsigned long rtc_reg_read(void) -{ - unsigned long tmp = *ds1603->reg; - return tmp; -} - -static unsigned long rtc_datareg_read(void) -{ - unsigned long tmp = *ds1603->data_reg; - return tmp; -} - -static void rtc_nrst_high(void) -{ - rtc_reg_write(rtc_reg_read() | ds1603->rst); -} - -static void rtc_nrst_low(void) -{ - rtc_reg_write(rtc_reg_read() & ~ds1603->rst); -} - -static void rtc_cycle_clock(unsigned long data) -{ - data |= ds1603->clk; - rtc_reg_write(data); - lasat_ndelay(250); - if (ds1603->data_reversed) - data &= ~ds1603->data; - else - data |= ds1603->data; - data &= ~ds1603->clk; - rtc_reg_write(data); - lasat_ndelay(250 + ds1603->huge_delay); -} - -static void rtc_write_databit(unsigned int bit) -{ - unsigned long data = rtc_reg_read(); - if (ds1603->data_reversed) - bit = !bit; - if (bit) - data |= ds1603->data; - else - data &= ~ds1603->data; - - rtc_reg_write(data); - lasat_ndelay(50 + ds1603->huge_delay); - rtc_cycle_clock(data); -} - -static unsigned int rtc_read_databit(void) -{ - unsigned int data; - - data = (rtc_datareg_read() & (1 << ds1603->data_read_shift)) - >> ds1603->data_read_shift; - rtc_cycle_clock(rtc_reg_read()); - return data; -} - -static void rtc_write_byte(unsigned int byte) -{ - int i; - - for (i = 0; i<=7; i++) { - rtc_write_databit(byte & 1L); - byte >>= 1; - } -} - -static void rtc_write_word(unsigned long word) -{ - int i; - - for (i = 0; i<=31; i++) { - rtc_write_databit(word & 1L); - word >>= 1; - } -} - -static unsigned long rtc_read_word(void) -{ - int i; - unsigned long word = 0; - unsigned long shift = 0; - - for (i = 0; i<=31; i++) { - word |= rtc_read_databit() << shift; - shift++; - } - return word; -} - -static void rtc_init_op(void) -{ - rtc_nrst_high(); - - rtc_reg_write(rtc_reg_read() & ~ds1603->clk); - - lasat_ndelay(50); -} - -static void rtc_end_op(void) -{ - rtc_nrst_low(); - lasat_ndelay(1000); -} - -/* interface */ -unsigned long ds1603_read(void) -{ - unsigned long word; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - rtc_init_op(); - rtc_write_byte(READ_TIME_CMD); - word = rtc_read_word(); - rtc_end_op(); - spin_unlock_irqrestore(&rtc_lock, flags); - return word; -} - -int ds1603_set(unsigned long time) -{ - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - rtc_init_op(); - rtc_write_byte(SET_TIME_CMD); - rtc_write_word(time); - rtc_end_op(); - spin_unlock_irqrestore(&rtc_lock, flags); - - return 0; -} - -void ds1603_set_trimmer(unsigned int trimval) -{ - rtc_init_op(); - rtc_write_byte(((trimval << TRIMMER_SHIFT) & TRIMMER_VALUE_MASK) - | (TRIMMER_SET_CMD)); - rtc_end_op(); -} - -void ds1603_disable(void) -{ - ds1603_set_trimmer(TRIMMER_DISABLE_RTC); -} - -void ds1603_enable(void) -{ - ds1603_set_trimmer(TRIMMER_DEFAULT); -} diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h deleted file mode 100644 index c2e5c76a379..00000000000 --- a/arch/mips/lasat/ds1603.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Dallas Semiconductors 1603 RTC driver - * - * Brian Murphy <brian@murphy.dk> - * - */ -#ifndef __DS1603_H -#define __DS1603_H - -struct ds_defs { - volatile u32 *reg; - volatile u32 *data_reg; - u32 rst; - u32 clk; - u32 data; - u32 data_read_shift; - char data_reversed; - u32 huge_delay; -}; - -extern struct ds_defs *ds1603; - -unsigned long ds1603_read(void); -int ds1603_set(unsigned long); -void ds1603_set_trimmer(unsigned int); -void ds1603_enable(void); -void ds1603_disable(void); -void ds1603_init(struct ds_defs *); - -#define TRIMMER_DEFAULT 3 -#define TRIMMER_DISABLE_RTC 0 - -#endif diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile deleted file mode 100644 index 35ecd6483ef..00000000000 --- a/arch/mips/lasat/image/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# -# MAKEFILE FOR THE MIPS LINUX BOOTLOADER AND ROM DEBUGGER -# -# i-data Networks -# -# Author: Thomas Horsten <thh@i-data.com> -# - -ifndef Version - Version = "$(USER)-test" -endif - -MKLASATIMG = mklasatimg -MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200 -KERNEL_IMAGE = $(TOPDIR)/vmlinux -KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ ) -KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ ) - -LDSCRIPT= -L$(obj) -Tromscript.normal - -HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \ - -D_kernel_entry=0x$(KERNEL_ENTRY) \ - -D VERSION="\"$(Version)\"" \ - -D TIMESTAMP=$(shell date +%s) - -$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE) - $(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $< - -OBJECTS = head.o kImage.o - -rom.sw: $(obj)/rom.sw - -$(obj)/rom.sw: $(obj)/rom.bin - $(MKLASATIMG) -o $@ -k $^ -m $(MKLASATIMG_ARCH) - -$(obj)/rom.bin: $(obj)/rom - $(OBJCOPY) -O binary -S $^ $@ - -# Rule to make the bootloader -$(obj)/rom: $(addprefix $(obj)/,$(OBJECTS)) - $(LD) $(LDFLAGS) $(LDSCRIPT) -o $@ $^ - -$(obj)/%.o: $(obj)/%.gz - $(LD) -r -o $@ -b binary $< - -$(obj)/%.gz: $(obj)/%.bin - gzip -cf -9 $< > $@ - -$(obj)/kImage.bin: $(KERNEL_IMAGE) - $(OBJCOPY) -O binary -S $^ $@ - -clean: - rm -f rom rom.bin rom.sw kImage.bin kImage.o diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S deleted file mode 100644 index efb95f2609c..00000000000 --- a/arch/mips/lasat/image/head.S +++ /dev/null @@ -1,31 +0,0 @@ -#include <asm/lasat/head.h> - - .text - .section .text.start, "ax" - .set noreorder - .set mips3 - - /* Magic words identifying a software image */ - .word LASAT_K_MAGIC0_VAL - .word LASAT_K_MAGIC1_VAL - - /* Image header version */ - .word 0x00000002 - - /* image start and size */ - .word _image_start - .word _image_size - - /* start of kernel and entrypoint in uncompressed image */ - .word _kernel_start - .word _kernel_entry - - /* Here we have room for future flags */ - - .org 0x40 -reldate: - .word TIMESTAMP - - .org 0x50 -release: - .string VERSION diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal deleted file mode 100644 index 988f8ad189c..00000000000 --- a/arch/mips/lasat/image/romscript.normal +++ /dev/null @@ -1,23 +0,0 @@ -OUTPUT_ARCH(mips) - -SECTIONS -{ - .text : - { - *(.text.start) - } - - /* Data in ROM */ - - .data ALIGN(0x10) : - { - *(.data) - } - _image_start = ADDR(.data); - _image_size = SIZEOF(.data); - - .other : - { - *(.*) - } -} diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c deleted file mode 100644 index 9a622b9a105..00000000000 --- a/arch/mips/lasat/interrupt.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the - * Lasat boards. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> - -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/lasat/lasatint.h> -#include <asm/time.h> -#include <asm/gdb-stub.h> - -static volatile int *lasat_int_status = NULL; -static volatile int *lasat_int_mask = NULL; -static volatile int lasat_int_mask_shift; - -void disable_lasat_irq(unsigned int irq_nr) -{ - *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift; -} - -void enable_lasat_irq(unsigned int irq_nr) -{ - *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift; -} - -static struct irq_chip lasat_irq_type = { - .name = "Lasat", - .ack = disable_lasat_irq, - .mask = disable_lasat_irq, - .mask_ack = disable_lasat_irq, - .unmask = enable_lasat_irq, -}; - -static inline int ls1bit32(unsigned int x) -{ - int b = 31, s; - - s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s; - s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s; - s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s; - s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s; - s = 1; if (x << 1 == 0) s = 0; b -= s; - - return b; -} - -static unsigned long (* get_int_status)(void); - -static unsigned long get_int_status_100(void) -{ - return *lasat_int_status & *lasat_int_mask; -} - -static unsigned long get_int_status_200(void) -{ - unsigned long int_status; - - int_status = *lasat_int_status; - int_status &= (int_status >> LASATINT_MASK_SHIFT_200) & 0xffff; - return int_status; -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long int_status; - unsigned int cause = read_c0_cause(); - int irq; - - if (cause & CAUSEF_IP7) { /* R4000 count / compare IRQ */ - ll_timer_interrupt(7); - return; - } - - int_status = get_int_status(); - - /* if int_status == 0, then the interrupt has already been cleared */ - if (int_status) { - irq = ls1bit32(int_status); - - do_IRQ(irq); - } -} - -void __init arch_init_irq(void) -{ - int i; - - switch (mips_machtype) { - case MACH_LASAT_100: - lasat_int_status = (void *)LASAT_INT_STATUS_REG_100; - lasat_int_mask = (void *)LASAT_INT_MASK_REG_100; - lasat_int_mask_shift = LASATINT_MASK_SHIFT_100; - get_int_status = get_int_status_100; - *lasat_int_mask = 0; - break; - case MACH_LASAT_200: - lasat_int_status = (void *)LASAT_INT_STATUS_REG_200; - lasat_int_mask = (void *)LASAT_INT_MASK_REG_200; - lasat_int_mask_shift = LASATINT_MASK_SHIFT_200; - get_int_status = get_int_status_200; - *lasat_int_mask &= 0xffff; - break; - default: - panic("arch_init_irq: mips_machtype incorrect"); - } - - for (i = 0; i <= LASATINT_END; i++) - set_irq_chip_and_handler(i, &lasat_irq_type, handle_level_irq); -} diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c deleted file mode 100644 index fbe9a87bd0a..00000000000 --- a/arch/mips/lasat/lasat_board.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines specific to the LASAT boards - */ -#include <linux/types.h> -#include <linux/crc32.h> -#include <asm/lasat/lasat.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <asm/bootinfo.h> -#include <asm/addrspace.h> -#include "at93c.h" -/* New model description table */ -#include "lasat_models.h" - -#define EEPROM_CRC(data, len) (~0 ^ crc32(~0, data, len)) - -struct lasat_info lasat_board_info; - -void update_bcastaddr(void); - -int EEPROMRead(unsigned int pos, unsigned char *data, int len) -{ - int i; - - for (i=0; i<len; i++) - *data++ = at93c_read(pos++); - - return 0; -} -int EEPROMWrite(unsigned int pos, unsigned char *data, int len) -{ - int i; - - for (i=0; i<len; i++) - at93c_write(pos++, *data++); - - return 0; -} - -static void init_flash_sizes(void) -{ - int i; - unsigned long *lb = lasat_board_info.li_flashpart_base; - unsigned long *ls = lasat_board_info.li_flashpart_size; - - ls[LASAT_MTD_BOOTLOADER] = 0x40000; - ls[LASAT_MTD_SERVICE] = 0xC0000; - ls[LASAT_MTD_NORMAL] = 0x100000; - - if (mips_machtype == MACH_LASAT_100) { - lasat_board_info.li_flash_base = 0x1e000000; - - lb[LASAT_MTD_BOOTLOADER] = 0x1e400000; - - if (lasat_board_info.li_flash_size > 0x200000) { - ls[LASAT_MTD_CONFIG] = 0x100000; - ls[LASAT_MTD_FS] = 0x500000; - } - } else { - lasat_board_info.li_flash_base = 0x10000000; - - if (lasat_board_info.li_flash_size < 0x1000000) { - lb[LASAT_MTD_BOOTLOADER] = 0x10000000; - ls[LASAT_MTD_CONFIG] = 0x100000; - if (lasat_board_info.li_flash_size >= 0x400000) { - ls[LASAT_MTD_FS] = lasat_board_info.li_flash_size - 0x300000; - } - } - } - - for (i = 1; i < LASAT_MTD_LAST; i++) - lb[i] = lb[i-1] + ls[i-1]; -} - -int lasat_init_board_info(void) -{ - int c; - unsigned long crc; - unsigned long cfg0, cfg1; - const product_info_t *ppi; - int i_n_base_models = N_BASE_MODELS; - const char * const * i_txt_base_models = txt_base_models; - int i_n_prids = N_PRIDS; - - memset(&lasat_board_info, 0, sizeof(lasat_board_info)); - - /* First read the EEPROM info */ - EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info, - sizeof(struct lasat_eeprom_struct)); - - /* Check the CRC */ - crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info), - sizeof(struct lasat_eeprom_struct) - 4); - - if (crc != lasat_board_info.li_eeprom_info.crc32) { - printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does " - "not match calculated, attempting to soldier on...\n"); - } - - if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION) { - printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version " - "%d, wanted version %d, attempting to soldier on...\n", - (unsigned int)lasat_board_info.li_eeprom_info.version, - LASAT_EEPROM_VERSION); - } - - cfg0 = lasat_board_info.li_eeprom_info.cfg[0]; - cfg1 = lasat_board_info.li_eeprom_info.cfg[1]; - - if ( LASAT_W0_DSCTYPE(cfg0) != 1) { - printk(KERN_WARNING "WARNING...\nWARNING...\n" - "Invalid configuration read from EEPROM, attempting to " - "soldier on..."); - } - /* We have a valid configuration */ - - switch (LASAT_W0_SDRAMBANKSZ(cfg0)) { - case 0: - lasat_board_info.li_memsize = 0x0800000; - break; - case 1: - lasat_board_info.li_memsize = 0x1000000; - break; - case 2: - lasat_board_info.li_memsize = 0x2000000; - break; - case 3: - lasat_board_info.li_memsize = 0x4000000; - break; - case 4: - lasat_board_info.li_memsize = 0x8000000; - break; - default: - lasat_board_info.li_memsize = 0; - } - - switch (LASAT_W0_SDRAMBANKS(cfg0)) { - case 0: - break; - case 1: - lasat_board_info.li_memsize *= 2; - break; - default: - break; - } - - switch (LASAT_W0_BUSSPEED(cfg0)) { - case 0x0: - lasat_board_info.li_bus_hz = 60000000; - break; - case 0x1: - lasat_board_info.li_bus_hz = 66000000; - break; - case 0x2: - lasat_board_info.li_bus_hz = 66666667; - break; - case 0x3: - lasat_board_info.li_bus_hz = 80000000; - break; - case 0x4: - lasat_board_info.li_bus_hz = 83333333; - break; - case 0x5: - lasat_board_info.li_bus_hz = 100000000; - break; - } - - switch (LASAT_W0_CPUCLK(cfg0)) { - case 0x0: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz; - break; - case 0x1: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz + - (lasat_board_info.li_bus_hz >> 1); - break; - case 0x2: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz + - lasat_board_info.li_bus_hz; - break; - case 0x3: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz + - lasat_board_info.li_bus_hz + - (lasat_board_info.li_bus_hz >> 1); - break; - case 0x4: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz + - lasat_board_info.li_bus_hz + - lasat_board_info.li_bus_hz; - break; - } - - /* Flash size */ - switch (LASAT_W1_FLASHSIZE(cfg1)) { - case 0: - lasat_board_info.li_flash_size = 0x200000; - break; - case 1: - lasat_board_info.li_flash_size = 0x400000; - break; - case 2: - lasat_board_info.li_flash_size = 0x800000; - break; - case 3: - lasat_board_info.li_flash_size = 0x1000000; - break; - case 4: - lasat_board_info.li_flash_size = 0x2000000; - break; - } - - init_flash_sizes(); - - lasat_board_info.li_bmid = LASAT_W0_BMID(cfg0); - lasat_board_info.li_prid = lasat_board_info.li_eeprom_info.prid; - if (lasat_board_info.li_prid == 0xffff || lasat_board_info.li_prid == 0) - lasat_board_info.li_prid = lasat_board_info.li_bmid; - - /* Base model stuff */ - if (lasat_board_info.li_bmid > i_n_base_models) - lasat_board_info.li_bmid = i_n_base_models; - strcpy(lasat_board_info.li_bmstr, i_txt_base_models[lasat_board_info.li_bmid]); - - /* Product ID dependent values */ - c = lasat_board_info.li_prid; - if (c >= i_n_prids) { - strcpy(lasat_board_info.li_namestr, "Unknown Model"); - strcpy(lasat_board_info.li_typestr, "Unknown Type"); - } else { - ppi = &vendor_info_table[0].vi_product_info[c]; - strcpy(lasat_board_info.li_namestr, ppi->pi_name); - if (ppi->pi_type) - strcpy(lasat_board_info.li_typestr, ppi->pi_type); - else - sprintf(lasat_board_info.li_typestr, "%d",10*c); - } - -#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL) - update_bcastaddr(); -#endif - - return 0; -} - -void lasat_write_eeprom_info(void) -{ - unsigned long crc; - - /* Generate the CRC */ - crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info), - sizeof(struct lasat_eeprom_struct) - 4); - lasat_board_info.li_eeprom_info.crc32 = crc; - - /* Write the EEPROM info */ - EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info, - sizeof(struct lasat_eeprom_struct)); -} - diff --git a/arch/mips/lasat/lasat_models.h b/arch/mips/lasat/lasat_models.h deleted file mode 100644 index ae0c5d0bd40..00000000000 --- a/arch/mips/lasat/lasat_models.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Model description tables - */ - -typedef struct product_info_t { - const char *pi_name; - const char *pi_type; -} product_info_t; - -typedef struct vendor_info_t { - const char *vi_name; - const product_info_t *vi_product_info; -} vendor_info_t; - -/* - * Base models - */ -static const char * const txt_base_models[] = { - "MQ 2", "MQ Pro", "SP 25", "SP 50", "SP 100", "SP 5000", "SP 7000", "SP 1000", "Unknown" -}; -#define N_BASE_MODELS (sizeof(txt_base_models)/sizeof(char*)-1) - -/* - * Eicon Networks - */ -static const char txt_en_mq[] = "Masquerade"; -static const char txt_en_sp[] = "Safepipe"; - -static const product_info_t product_info_eicon[] = { - { txt_en_mq, "II" }, /* 0 */ - { txt_en_mq, "Pro" }, /* 1 */ - { txt_en_sp, "25" }, /* 2 */ - { txt_en_sp, "50" }, /* 3 */ - { txt_en_sp, "100" }, /* 4 */ - { txt_en_sp, "5000" }, /* 5 */ - { txt_en_sp, "7000" }, /* 6 */ - { txt_en_sp, "30" }, /* 7 */ - { txt_en_sp, "5100" }, /* 8 */ - { txt_en_sp, "7100" }, /* 9 */ - { txt_en_sp, "1110" }, /* 10 */ - { txt_en_sp, "3020" }, /* 11 */ - { txt_en_sp, "3030" }, /* 12 */ - { txt_en_sp, "5020" }, /* 13 */ - { txt_en_sp, "5030" }, /* 14 */ - { txt_en_sp, "1120" }, /* 15 */ - { txt_en_sp, "1130" }, /* 16 */ - { txt_en_sp, "6010" }, /* 17 */ - { txt_en_sp, "6110" }, /* 18 */ - { txt_en_sp, "6210" }, /* 19 */ - { txt_en_sp, "1020" }, /* 20 */ - { txt_en_sp, "1040" }, /* 21 */ - { txt_en_sp, "1050" }, /* 22 */ - { txt_en_sp, "1060" }, /* 23 */ -}; -#define N_PRIDS (sizeof(product_info_eicon)/sizeof(product_info_t)) - -/* - * The vendor table - */ -static vendor_info_t const vendor_info_table[] = { - { "Eicon Networks", product_info_eicon }, -}; -#define N_VENDORS (sizeof(vendor_info_table)/sizeof(vendor_info_t)) diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c deleted file mode 100644 index 9ae82c3ffb0..00000000000 --- a/arch/mips/lasat/picvue.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * Picvue PVC160206 display driver - * - * Brian Murphy <brian@murphy.dk> - * - */ -#include <linux/kernel.h> -#include <linux/delay.h> -#include <asm/bootinfo.h> -#include <asm/lasat/lasat.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/string.h> - -#include "picvue.h" - -#define PVC_BUSY 0x80 -#define PVC_NLINES 2 -#define PVC_DISPMEM 80 -#define PVC_LINELEN PVC_DISPMEM / PVC_NLINES - -struct pvc_defs *picvue = NULL; - -DECLARE_MUTEX(pvc_sem); - -static void pvc_reg_write(u32 val) -{ - *picvue->reg = val; -} - -static u32 pvc_reg_read(void) -{ - u32 tmp = *picvue->reg; - return tmp; -} - -static void pvc_write_byte(u32 data, u8 byte) -{ - data |= picvue->e; - pvc_reg_write(data); - data &= ~picvue->data_mask; - data |= byte << picvue->data_shift; - pvc_reg_write(data); - ndelay(220); - pvc_reg_write(data & ~picvue->e); - ndelay(220); -} - -static u8 pvc_read_byte(u32 data) -{ - u8 byte; - - data |= picvue->e; - pvc_reg_write(data); - ndelay(220); - byte = (pvc_reg_read() & picvue->data_mask) >> picvue->data_shift; - data &= ~picvue->e; - pvc_reg_write(data); - ndelay(220); - return byte; -} - -static u8 pvc_read_data(void) -{ - u32 data = pvc_reg_read(); - u8 byte; - data |= picvue->rw; - data &= ~picvue->rs; - pvc_reg_write(data); - ndelay(40); - byte = pvc_read_byte(data); - data |= picvue->rs; - pvc_reg_write(data); - return byte; -} - -#define TIMEOUT 1000 -static int pvc_wait(void) -{ - int i = TIMEOUT; - int err = 0; - - while ((pvc_read_data() & PVC_BUSY) && i) - i--; - if (i == 0) - err = -ETIME; - - return err; -} - -#define MODE_INST 0 -#define MODE_DATA 1 -static void pvc_write(u8 byte, int mode) -{ - u32 data = pvc_reg_read(); - data &= ~picvue->rw; - if (mode == MODE_DATA) - data |= picvue->rs; - else - data &= ~picvue->rs; - pvc_reg_write(data); - ndelay(40); - pvc_write_byte(data, byte); - if (mode == MODE_DATA) - data &= ~picvue->rs; - else - data |= picvue->rs; - pvc_reg_write(data); - pvc_wait(); -} - -void pvc_write_string(const unsigned char *str, u8 addr, int line) -{ - int i = 0; - - if (line > 0 && (PVC_NLINES > 1)) - addr += 0x40 * line; - pvc_write(0x80 | addr, MODE_INST); - - while (*str != 0 && i < PVC_LINELEN) { - pvc_write(*str++, MODE_DATA); - i++; - } -} - -void pvc_write_string_centered(const unsigned char *str, int line) -{ - int len = strlen(str); - u8 addr; - - if (len > PVC_VISIBLE_CHARS) - addr = 0; - else - addr = (PVC_VISIBLE_CHARS - strlen(str))/2; - - pvc_write_string(str, addr, line); -} - -void pvc_dump_string(const unsigned char *str) -{ - int len = strlen(str); - - pvc_write_string(str, 0, 0); - if (len > PVC_VISIBLE_CHARS) - pvc_write_string(&str[PVC_VISIBLE_CHARS], 0, 1); -} - -#define BM_SIZE 8 -#define MAX_PROGRAMMABLE_CHARS 8 -int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]) -{ - int i; - int addr; - - if (charnum > MAX_PROGRAMMABLE_CHARS) - return -ENOENT; - - addr = charnum * 8; - pvc_write(0x40 | addr, MODE_INST); - - for (i=0; i<BM_SIZE; i++) - pvc_write(bitmap[i], MODE_DATA); - return 0; -} - -#define FUNC_SET_CMD 0x20 -#define EIGHT_BYTE (1 << 4) -#define FOUR_BYTE 0 -#define TWO_LINES (1 << 3) -#define ONE_LINE 0 -#define LARGE_FONT (1 << 2) -#define SMALL_FONT 0 -static void pvc_funcset(u8 cmd) -{ - pvc_write(FUNC_SET_CMD | (cmd & (EIGHT_BYTE|TWO_LINES|LARGE_FONT)), MODE_INST); -} - -#define ENTRYMODE_CMD 0x4 -#define AUTO_INC (1 << 1) -#define AUTO_DEC 0 -#define CURSOR_FOLLOWS_DISP (1 << 0) -static void pvc_entrymode(u8 cmd) -{ - pvc_write(ENTRYMODE_CMD | (cmd & (AUTO_INC|CURSOR_FOLLOWS_DISP)), MODE_INST); -} - -#define DISP_CNT_CMD 0x08 -#define DISP_OFF 0 -#define DISP_ON (1 << 2) -#define CUR_ON (1 << 1) -#define CUR_BLINK (1 << 0) -void pvc_dispcnt(u8 cmd) -{ - pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST); -} - -#define MOVE_CMD 0x10 -#define DISPLAY (1 << 3) -#define CURSOR 0 -#define RIGHT (1 << 2) -#define LEFT 0 -void pvc_move(u8 cmd) -{ - pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST); -} - -#define CLEAR_CMD 0x1 -void pvc_clear(void) -{ - pvc_write(CLEAR_CMD, MODE_INST); -} - -#define HOME_CMD 0x2 -void pvc_home(void) -{ - pvc_write(HOME_CMD, MODE_INST); -} - -int pvc_init(void) -{ - u8 cmd = EIGHT_BYTE; - - if (PVC_NLINES == 2) - cmd |= (SMALL_FONT|TWO_LINES); - else - cmd |= (LARGE_FONT|ONE_LINE); - pvc_funcset(cmd); - pvc_dispcnt(DISP_ON); - pvc_entrymode(AUTO_INC); - - pvc_clear(); - pvc_write_string_centered("Display", 0); - pvc_write_string_centered("Initialized", 1); - - return 0; -} - -module_init(pvc_init); -MODULE_LICENSE("GPL"); diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h deleted file mode 100644 index 2a96bf97189..00000000000 --- a/arch/mips/lasat/picvue.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Picvue PVC160206 display driver - * - * Brian Murphy <brian.murphy@eicon.com> - * - */ -#include <asm/semaphore.h> - -struct pvc_defs { - volatile u32 *reg; - u32 data_shift; - u32 data_mask; - u32 e; - u32 rw; - u32 rs; -}; - -extern struct pvc_defs *picvue; - -#define PVC_NLINES 2 -#define PVC_DISPMEM 80 -#define PVC_LINELEN PVC_DISPMEM / PVC_NLINES -#define PVC_VISIBLE_CHARS 16 - -void pvc_write_string(const unsigned char *str, u8 addr, int line); -void pvc_write_string_centered(const unsigned char *str, int line); -void pvc_dump_string(const unsigned char *str); - -#define BM_SIZE 8 -#define MAX_PROGRAMMABLE_CHARS 8 -int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]); - -void pvc_dispcnt(u8 cmd); -#define DISP_OFF 0 -#define DISP_ON (1 << 2) -#define CUR_ON (1 << 1) -#define CUR_BLINK (1 << 0) - -void pvc_move(u8 cmd); -#define DISPLAY (1 << 3) -#define CURSOR 0 -#define RIGHT (1 << 2) -#define LEFT 0 - -void pvc_clear(void); -void pvc_home(void); - -extern struct semaphore pvc_sem; diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c deleted file mode 100644 index cce7cddcdb0..00000000000 --- a/arch/mips/lasat/picvue_proc.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Picvue PVC160206 display driver - * - * Brian Murphy <brian.murphy@eicon.com> - * - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/errno.h> - -#include <linux/proc_fs.h> -#include <linux/interrupt.h> - -#include <linux/timer.h> - -#include "picvue.h" - -static char pvc_lines[PVC_NLINES][PVC_LINELEN+1]; -static int pvc_linedata[PVC_NLINES]; -static struct proc_dir_entry *pvc_display_dir; -static char *pvc_linename[PVC_NLINES] = {"line1", "line2"}; -#define DISPLAY_DIR_NAME "display" -static int scroll_dir = 0, scroll_interval = 0; - -static struct timer_list timer; - -static void pvc_display(unsigned long data) { - int i; - - pvc_clear(); - for (i=0; i<PVC_NLINES; i++) - pvc_write_string(pvc_lines[i], 0, i); -} - -static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0); - -static int pvc_proc_read_line(char *page, char **start, - off_t off, int count, - int *eof, void *data) -{ - char *origpage = page; - int lineno = *(int *)data; - - if (lineno < 0 || lineno > PVC_NLINES) { - printk("proc_read_line: invalid lineno %d\n", lineno); - return 0; - } - - down(&pvc_sem); - page += sprintf(page, "%s\n", pvc_lines[lineno]); - up(&pvc_sem); - - return page - origpage; -} - -static int pvc_proc_write_line(struct file *file, const char *buffer, - unsigned long count, void *data) -{ - int origcount = count; - int lineno = *(int *)data; - - if (lineno < 0 || lineno > PVC_NLINES) { - printk("proc_write_line: invalid lineno %d\n", lineno); - return origcount; - } - - if (count > PVC_LINELEN) - count = PVC_LINELEN; - - if (buffer[count-1] == '\n') - count--; - - down(&pvc_sem); - strncpy(pvc_lines[lineno], buffer, count); - pvc_lines[lineno][count] = '\0'; - up(&pvc_sem); - - tasklet_schedule(&pvc_display_tasklet); - - return origcount; -} - -static int pvc_proc_write_scroll(struct file *file, const char *buffer, - unsigned long count, void *data) -{ - int origcount = count; - int cmd = simple_strtol(buffer, NULL, 10); - - down(&pvc_sem); - if (scroll_interval != 0) - del_timer(&timer); - - if (cmd == 0) { - scroll_dir = 0; - scroll_interval = 0; - } else { - if (cmd < 0) { - scroll_dir = -1; - scroll_interval = -cmd; - } else { - scroll_dir = 1; - scroll_interval = cmd; - } - add_timer(&timer); - } - up(&pvc_sem); - - return origcount; -} - -static int pvc_proc_read_scroll(char *page, char **start, - off_t off, int count, - int *eof, void *data) -{ - char *origpage = page; - - down(&pvc_sem); - page += sprintf(page, "%d\n", scroll_dir * scroll_interval); - up(&pvc_sem); - - return page - origpage; -} - - -void pvc_proc_timerfunc(unsigned long data) -{ - if (scroll_dir < 0) - pvc_move(DISPLAY|RIGHT); - else if (scroll_dir > 0) - pvc_move(DISPLAY|LEFT); - - timer.expires = jiffies + scroll_interval; - add_timer(&timer); -} - -static void pvc_proc_cleanup(void) -{ - int i; - for (i=0; i<PVC_NLINES; i++) - remove_proc_entry(pvc_linename[i], pvc_display_dir); - remove_proc_entry("scroll", pvc_display_dir); - remove_proc_entry(DISPLAY_DIR_NAME, NULL); - - del_timer(&timer); -} - -static int __init pvc_proc_init(void) -{ - struct proc_dir_entry *proc_entry; - int i; - - pvc_display_dir = proc_mkdir(DISPLAY_DIR_NAME, NULL); - if (pvc_display_dir == NULL) - goto error; - - for (i=0; i<PVC_NLINES; i++) { - strcpy(pvc_lines[i], ""); - pvc_linedata[i] = i; - } - for (i=0; i<PVC_NLINES; i++) { - proc_entry = create_proc_entry(pvc_linename[i], 0644, pvc_display_dir); - if (proc_entry == NULL) - goto error; - proc_entry->read_proc = pvc_proc_read_line; - proc_entry->write_proc = pvc_proc_write_line; - proc_entry->data = &pvc_linedata[i]; - } - proc_entry = create_proc_entry("scroll", 0644, pvc_display_dir); - if (proc_entry == NULL) - goto error; - proc_entry->write_proc = pvc_proc_write_scroll; - proc_entry->read_proc = pvc_proc_read_scroll; - - init_timer(&timer); - timer.function = pvc_proc_timerfunc; - - return 0; -error: - pvc_proc_cleanup(); - return -ENOMEM; -} - -module_init(pvc_proc_init); -module_exit(pvc_proc_cleanup); -MODULE_LICENSE("GPL"); diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c deleted file mode 100644 index 812c6ac366b..00000000000 --- a/arch/mips/lasat/prom.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * PROM interface routines. - */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <linux/ioport.h> -#include <asm/bootinfo.h> -#include <asm/lasat/lasat.h> -#include <asm/cpu.h> - -#include "at93c.h" -#include <asm/lasat/eeprom.h> -#include "prom.h" - -#define RESET_VECTOR 0xbfc00000 -#define PROM_JUMP_TABLE_ENTRY(n) (*((u32 *)(RESET_VECTOR + 0x20) + n)) -#define PROM_DISPLAY_ADDR PROM_JUMP_TABLE_ENTRY(0) -#define PROM_PUTC_ADDR PROM_JUMP_TABLE_ENTRY(1) -#define PROM_MONITOR_ADDR PROM_JUMP_TABLE_ENTRY(2) - -static void null_prom_display(const char *string, int pos, int clear) -{ -} - -static void null_prom_monitor(void) -{ -} - -static void null_prom_putc(char c) -{ -} - -/* these are functions provided by the bootloader */ -static void (* __prom_putc)(char c) = null_prom_putc; - -void prom_putchar(char c) -{ - __prom_putc(c); -} - -void (* prom_display)(const char *string, int pos, int clear) = - null_prom_display; -void (* prom_monitor)(void) = null_prom_monitor; - -unsigned int lasat_ndelay_divider; - -static void setup_prom_vectors(void) -{ - u32 version = *(u32 *)(RESET_VECTOR + 0x90); - - if (version >= 307) { - prom_display = (void *)PROM_DISPLAY_ADDR; - __prom_putc = (void *)PROM_PUTC_ADDR; - prom_monitor = (void *)PROM_MONITOR_ADDR; - } - printk("prom vectors set up\n"); -} - -static struct at93c_defs at93c_defs[N_MACHTYPES] = { - {(void *)AT93C_REG_100, (void *)AT93C_RDATA_REG_100, AT93C_RDATA_SHIFT_100, - AT93C_WDATA_SHIFT_100, AT93C_CS_M_100, AT93C_CLK_M_100}, - {(void *)AT93C_REG_200, (void *)AT93C_RDATA_REG_200, AT93C_RDATA_SHIFT_200, - AT93C_WDATA_SHIFT_200, AT93C_CS_M_200, AT93C_CLK_M_200}, -}; - -void __init prom_init(void) -{ - int argc = fw_arg0; - char **argv = (char **) fw_arg1; - - setup_prom_vectors(); - - if (current_cpu_data.cputype == CPU_R5000) { - printk("LASAT 200 board\n"); - mips_machtype = MACH_LASAT_200; - lasat_ndelay_divider = LASAT_200_DIVIDER; - } else { - printk("LASAT 100 board\n"); - mips_machtype = MACH_LASAT_100; - lasat_ndelay_divider = LASAT_100_DIVIDER; - } - - at93c = &at93c_defs[mips_machtype]; - - lasat_init_board_info(); /* Read info from EEPROM */ - - mips_machgroup = MACH_GROUP_LASAT; - - /* Get the command line */ - if (argc > 0) { - strncpy(arcs_cmdline, argv[0], CL_SIZE-1); - arcs_cmdline[CL_SIZE-1] = '\0'; - } - - /* Set the I/O base address */ - set_io_port_base(KSEG1); - - /* Set memory regions */ - ioport_resource.start = 0; - ioport_resource.end = 0xffffffff; /* Wrong, fixme. */ - - add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM); -} - -void __init prom_free_prom_memory(void) -{ -} - -const char *get_system_type(void) -{ - return lasat_board_info.li_bmstr; -} diff --git a/arch/mips/lasat/prom.h b/arch/mips/lasat/prom.h deleted file mode 100644 index 019d45fbd26..00000000000 --- a/arch/mips/lasat/prom.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef PROM_H -#define PROM_H -extern void (* prom_display)(const char *string, int pos, int clear); -extern void (* prom_monitor)(void); -#endif diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c deleted file mode 100644 index 9e22acf0308..00000000000 --- a/arch/mips/lasat/reset.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Reset the LASAT board. - */ -#include <linux/kernel.h> -#include <linux/pm.h> - -#include <asm/reboot.h> -#include <asm/system.h> -#include <asm/lasat/lasat.h> - -#include "picvue.h" -#include "prom.h" - -static void lasat_machine_restart(char *command); -static void lasat_machine_halt(void); - -/* Used to set machine to boot in service mode via /proc interface */ -int lasat_boot_to_service = 0; - -static void lasat_machine_restart(char *command) -{ - local_irq_disable(); - - if (lasat_boot_to_service) { - printk("machine_restart: Rebooting to service mode\n"); - *(volatile unsigned int *)0xa0000024 = 0xdeadbeef; - *(volatile unsigned int *)0xa00000fc = 0xfedeabba; - } - *lasat_misc->reset_reg = 0xbedead; - for (;;) ; -} - -#define MESSAGE "System halted" -static void lasat_machine_halt(void) -{ - local_irq_disable(); - - /* Disable interrupts and loop forever */ - printk(KERN_NOTICE MESSAGE "\n"); -#ifdef CONFIG_PICVUE - pvc_clear(); - pvc_write_string(MESSAGE, 0, 0); -#endif - prom_monitor(); - for (;;) ; -} - -void lasat_reboot_setup(void) -{ - _machine_restart = lasat_machine_restart; - _machine_halt = lasat_machine_halt; - pm_power_off = lasat_machine_halt; -} diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c deleted file mode 100644 index 488007f1398..00000000000 --- a/arch/mips/lasat/setup.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. - * - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * Brian Murphy <brian@murphy.dk> - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Lasat specific setup. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/serial.h> -#include <linux/serial_core.h> - -#include <asm/time.h> -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/lasat/lasat.h> -#include <asm/lasat/serial.h> - -#ifdef CONFIG_PICVUE -#include <linux/notifier.h> -#endif - -#include "ds1603.h" -#include <asm/lasat/ds1603.h> -#include <asm/lasat/picvue.h> -#include <asm/lasat/eeprom.h> - -#include "prom.h" - -int lasat_command_line = 0; -void lasatint_init(void); - -extern void lasat_reboot_setup(void); -extern void pcisetup(void); -extern void edhac_init(void *, void *, void *); -extern void addrflt_init(void); - -struct lasat_misc lasat_misc_info[N_MACHTYPES] = { - {(void *)KSEG1ADDR(0x1c840000), (void *)KSEG1ADDR(0x1c800000), 2}, - {(void *)KSEG1ADDR(0x11080000), (void *)KSEG1ADDR(0x11000000), 6} -}; - -struct lasat_misc *lasat_misc = NULL; - -#ifdef CONFIG_DS1603 -static struct ds_defs ds_defs[N_MACHTYPES] = { - { (void *)DS1603_REG_100, (void *)DS1603_REG_100, - DS1603_RST_100, DS1603_CLK_100, DS1603_DATA_100, - DS1603_DATA_SHIFT_100, 0, 0 }, - { (void *)DS1603_REG_200, (void *)DS1603_DATA_REG_200, - DS1603_RST_200, DS1603_CLK_200, DS1603_DATA_200, - DS1603_DATA_READ_SHIFT_200, 1, 2000 } -}; -#endif - -#ifdef CONFIG_PICVUE -#include "picvue.h" -static struct pvc_defs pvc_defs[N_MACHTYPES] = { - { (void *)PVC_REG_100, PVC_DATA_SHIFT_100, PVC_DATA_M_100, - PVC_E_100, PVC_RW_100, PVC_RS_100 }, - { (void *)PVC_REG_200, PVC_DATA_SHIFT_200, PVC_DATA_M_200, - PVC_E_200, PVC_RW_200, PVC_RS_200 } -}; -#endif - -static int lasat_panic_display(struct notifier_block *this, - unsigned long event, void *ptr) -{ -#ifdef CONFIG_PICVUE - unsigned char *string = ptr; - if (string == NULL) - string = "Kernel Panic"; - pvc_dump_string(string); -#endif - return NOTIFY_DONE; -} - -static int lasat_panic_prom_monitor(struct notifier_block *this, - unsigned long event, void *ptr) -{ - prom_monitor(); - return NOTIFY_DONE; -} - -static struct notifier_block lasat_panic_block[] = -{ - { lasat_panic_display, NULL, INT_MAX }, - { lasat_panic_prom_monitor, NULL, INT_MIN } -}; - -static void lasat_time_init(void) -{ - mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2; -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5); -} - -#define DYNAMIC_SERIAL_INIT -#ifdef DYNAMIC_SERIAL_INIT -void __init serial_init(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct uart_port s; - - memset(&s, 0, sizeof(s)); - - s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - s.iotype = UPIO_MEM; - - if (mips_machtype == MACH_LASAT_100) { - s.uartclk = LASAT_BASE_BAUD_100 * 16; - s.irq = LASATINT_UART_100; - s.regshift = LASAT_UART_REGS_SHIFT_100; - s.membase = (char *)KSEG1ADDR(LASAT_UART_REGS_BASE_100); - } else { - s.uartclk = LASAT_BASE_BAUD_200 * 16; - s.irq = LASATINT_UART_200; - s.regshift = LASAT_UART_REGS_SHIFT_200; - s.membase = (char *)KSEG1ADDR(LASAT_UART_REGS_BASE_200); - } - - if (early_serial_setup(&s) != 0) - printk(KERN_ERR "Serial setup failed!\n"); -#endif -} -#endif - -void __init plat_mem_setup(void) -{ - int i; - lasat_misc = &lasat_misc_info[mips_machtype]; -#ifdef CONFIG_PICVUE - picvue = &pvc_defs[mips_machtype]; -#endif - - /* Set up panic notifier */ - for (i = 0; i < sizeof(lasat_panic_block) / sizeof(struct notifier_block); i++) - atomic_notifier_chain_register(&panic_notifier_list, - &lasat_panic_block[i]); - - lasat_reboot_setup(); - - board_time_init = lasat_time_init; - -#ifdef CONFIG_DS1603 - ds1603 = &ds_defs[mips_machtype]; - rtc_mips_get_time = ds1603_read; - rtc_mips_set_time = ds1603_set; -#endif - -#ifdef DYNAMIC_SERIAL_INIT - serial_init(); -#endif - /* Switch from prom exception handler to normal mode */ - change_c0_status(ST0_BEV,0); - - pr_info("Lasat specific initialization complete\n"); -} diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c deleted file mode 100644 index 699ab1886ce..00000000000 --- a/arch/mips/lasat/sysctl.c +++ /dev/null @@ -1,441 +0,0 @@ -/* - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines specific to the LASAT boards - */ -#include <linux/types.h> -#include <asm/lasat/lasat.h> - -#include <linux/module.h> -#include <linux/sysctl.h> -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/net.h> -#include <linux/inet.h> -#include <linux/mutex.h> -#include <asm/uaccess.h> - -#include "sysctl.h" -#include "ds1603.h" - -static DEFINE_MUTEX(lasat_info_mutex); - -/* Strategy function to write EEPROM after changing string entry */ -int sysctl_lasatstring(ctl_table *table, int *name, int nlen, - void *oldval, size_t *oldlenp, - void *newval, size_t newlen) -{ - int r; - mutex_lock(&lasat_info_mutex); - r = sysctl_string(table, name, - nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); - return r; - } - if (newval && newlen) { - lasat_write_eeprom_info(); - } - mutex_unlock(&lasat_info_mutex); - return 1; -} - - -/* And the same for proc */ -int proc_dolasatstring(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *ppos) -{ - int r; - mutex_lock(&lasat_info_mutex); - r = proc_dostring(table, write, filp, buffer, lenp, ppos); - if ( (!write) || r) { - mutex_unlock(&lasat_info_mutex); - return r; - } - lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 0; -} - -/* proc function to write EEPROM after changing int entry */ -int proc_dolasatint(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *ppos) -{ - int r; - mutex_lock(&lasat_info_mutex); - r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ( (!write) || r) { - mutex_unlock(&lasat_info_mutex); - return r; - } - lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 0; -} - -static int rtctmp; - -#ifdef CONFIG_DS1603 -/* proc function to read/write RealTime Clock */ -int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *ppos) -{ - int r; - mutex_lock(&lasat_info_mutex); - if (!write) { - rtctmp = ds1603_read(); - /* check for time < 0 and set to 0 */ - if (rtctmp < 0) - rtctmp = 0; - } - r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ( (!write) || r) { - mutex_unlock(&lasat_info_mutex); - return r; - } - ds1603_set(rtctmp); - mutex_unlock(&lasat_info_mutex); - return 0; -} -#endif - -/* Sysctl for setting the IP addresses */ -int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen, - void *oldval, size_t *oldlenp, - void *newval, size_t newlen) -{ - int r; - mutex_lock(&lasat_info_mutex); - r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); - return r; - } - if (newval && newlen) { - lasat_write_eeprom_info(); - } - mutex_unlock(&lasat_info_mutex); - return 1; -} - -#ifdef CONFIG_DS1603 -/* Same for RTC */ -int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen, - void *oldval, size_t *oldlenp, - void *newval, size_t newlen) -{ - int r; - mutex_lock(&lasat_info_mutex); - rtctmp = ds1603_read(); - if (rtctmp < 0) - rtctmp = 0; - r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); - return r; - } - if (newval && newlen) { - ds1603_set(rtctmp); - } - mutex_unlock(&lasat_info_mutex); - return 1; -} -#endif - -#ifdef CONFIG_INET -static char lasat_bcastaddr[16]; - -void update_bcastaddr(void) -{ - unsigned int ip; - - ip = (lasat_board_info.li_eeprom_info.ipaddr & - lasat_board_info.li_eeprom_info.netmask) | - ~lasat_board_info.li_eeprom_info.netmask; - - sprintf(lasat_bcastaddr, "%d.%d.%d.%d", - (ip ) & 0xff, - (ip >> 8) & 0xff, - (ip >> 16) & 0xff, - (ip >> 24) & 0xff); -} - -static char proc_lasat_ipbuf[32]; -/* Parsing of IP address */ -int proc_lasat_ip(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *ppos) -{ - int len; - unsigned int ip; - char *p, c; - - if (!table->data || !table->maxlen || !*lenp || - (*ppos && !write)) { - *lenp = 0; - return 0; - } - - mutex_lock(&lasat_info_mutex); - if (write) { - len = 0; - p = buffer; - while (len < *lenp) { - if(get_user(c, p++)) { - mutex_unlock(&lasat_info_mutex); - return -EFAULT; - } - if (c == 0 || c == '\n') - break; - len++; - } - if (len >= sizeof(proc_lasat_ipbuf)-1) - len = sizeof(proc_lasat_ipbuf) - 1; - if (copy_from_user(proc_lasat_ipbuf, buffer, len)) - { - mutex_unlock(&lasat_info_mutex); - return -EFAULT; - } - proc_lasat_ipbuf[len] = 0; - *ppos += *lenp; - /* Now see if we can convert it to a valid IP */ - ip = in_aton(proc_lasat_ipbuf); - *(unsigned int *)(table->data) = ip; - lasat_write_eeprom_info(); - } else { - ip = *(unsigned int *)(table->data); - sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d", - (ip ) & 0xff, - (ip >> 8) & 0xff, - (ip >> 16) & 0xff, - (ip >> 24) & 0xff); - len = strlen(proc_lasat_ipbuf); - if (len > *lenp) - len = *lenp; - if (len) - if(copy_to_user(buffer, proc_lasat_ipbuf, len)) { - mutex_unlock(&lasat_info_mutex); - return -EFAULT; - } - if (len < *lenp) { - if(put_user('\n', ((char *) buffer) + len)) { - mutex_unlock(&lasat_info_mutex); - return -EFAULT; - } - len++; - } - *lenp = len; - *ppos += len; - } - update_bcastaddr(); - mutex_unlock(&lasat_info_mutex); - return 0; -} -#endif /* defined(CONFIG_INET) */ - -static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, - void *oldval, size_t *oldlenp, - void *newval, size_t newlen) -{ - int r; - - mutex_lock(&lasat_info_mutex); - r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); - return r; - } - - if (newval && newlen) - { - if (name && *name == LASAT_PRID) - lasat_board_info.li_eeprom_info.prid = *(int*)newval; - - lasat_write_eeprom_info(); - lasat_init_board_info(); - } - mutex_unlock(&lasat_info_mutex); - - return 0; -} - -int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *ppos) -{ - int r; - mutex_lock(&lasat_info_mutex); - r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ( (!write) || r) { - mutex_unlock(&lasat_info_mutex); - return r; - } - if (filp && filp->f_path.dentry) - { - if (!strcmp(filp->f_path.dentry->d_name.name, "prid")) - lasat_board_info.li_eeprom_info.prid = lasat_board_info.li_prid; - if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess")) - lasat_board_info.li_eeprom_info.debugaccess = lasat_board_info.li_debugaccess; - } - lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 0; -} - -extern int lasat_boot_to_service; - -#ifdef CONFIG_SYSCTL - -static ctl_table lasat_table[] = { - { - .ctl_name = CTL_UNNUMBERED, - .procname = "cpu-hz", - .data = &lasat_board_info.li_cpu_hz, - .maxlen = sizeof(int), - .mode = 0444, - .proc_handler = &proc_dointvec, - .strategy = &sysctl_intvec - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "bus-hz", - .data = &lasat_board_info.li_bus_hz, - .maxlen = sizeof(int), - .mode = 0444, - .proc_handler = &proc_dointvec, - .strategy = &sysctl_intvec - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "bmid", - .data = &lasat_board_info.li_bmid, - .maxlen = sizeof(int), - .mode = 0444, - .proc_handler = &proc_dointvec, - .strategy = &sysctl_intvec - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "prid", - .data = &lasat_board_info.li_prid, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_lasat_eeprom_value, - .strategy = &sysctl_lasat_eeprom_value - }, -#ifdef CONFIG_INET - { - .ctl_name = CTL_UNNUMBERED, - .procname = "ipaddr", - .data = &lasat_board_info.li_eeprom_info.ipaddr, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_lasat_ip, - .strategy = &sysctl_lasat_intvec - }, - { - .ctl_name = LASAT_NETMASK, - .procname = "netmask", - .data = &lasat_board_info.li_eeprom_info.netmask, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_lasat_ip, - .strategy = &sysctl_lasat_intvec - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "bcastaddr", - .data = &lasat_bcastaddr, - .maxlen = sizeof(lasat_bcastaddr), - .mode = 0600, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string - }, -#endif - { - .ctl_name = CTL_UNNUMBERED, - .procname = "passwd_hash", - .data = &lasat_board_info.li_eeprom_info.passwd_hash, - .maxlen = sizeof(lasat_board_info.li_eeprom_info.passwd_hash), - .mode = 0600, - .proc_handler = &proc_dolasatstring, - .strategy = &sysctl_lasatstring - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "boot-service", - .data = &lasat_boot_to_service, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - .strategy = &sysctl_intvec - }, -#ifdef CONFIG_DS1603 - { - .ctl_name = CTL_UNNUMBERED, - .procname = "rtc", - .data = &rtctmp, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dolasatrtc, - .strategy = &sysctl_lasat_rtc - }, -#endif - { - .ctl_name = CTL_UNNUMBERED, - .procname = "namestr", - .data = &lasat_board_info.li_namestr, - .maxlen = sizeof(lasat_board_info.li_namestr), - .mode = 0444, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "typestr", - .data = &lasat_board_info.li_typestr, - .maxlen = sizeof(lasat_board_info.li_typestr), - .mode = 0444, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string - }, - {} -}; - -static ctl_table lasat_root_table[] = { - { - .ctl_name = CTL_UNNUMBERED, - .procname = "lasat", - .mode = 0555, - .child = lasat_table - }, - {} -}; - -static int __init lasat_register_sysctl(void) -{ - struct ctl_table_header *lasat_table_header; - - lasat_table_header = - register_sysctl_table(lasat_root_table); - - return 0; -} - -__initcall(lasat_register_sysctl); -#endif /* CONFIG_SYSCTL */ diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h deleted file mode 100644 index 4d139d2adbd..00000000000 --- a/arch/mips/lasat/sysctl.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * LASAT sysctl values - */ - -#ifndef _LASAT_SYSCTL_H -#define _LASAT_SYSCTL_H - -/* /proc/sys/lasat */ -enum { - LASAT_CPU_HZ=1, - LASAT_BUS_HZ, - LASAT_MODEL, - LASAT_PRID, - LASAT_IPADDR, - LASAT_NETMASK, - LASAT_BCAST, - LASAT_PASSWORD, - LASAT_SBOOT, - LASAT_RTC, - LASAT_NAMESTR, - LASAT_TYPESTR, -}; - -#endif /* _LASAT_SYSCTL_H */ diff --git a/arch/mips/lemote/lm2e/Makefile b/arch/mips/lemote/lm2e/Makefile new file mode 100644 index 00000000000..fb1b48c48cb --- /dev/null +++ b/arch/mips/lemote/lm2e/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for Lemote Fulong mini-PC board. +# + +obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o +EXTRA_AFLAGS := $(CFLAGS) + diff --git a/arch/mips/lemote/lm2e/bonito-irq.c b/arch/mips/lemote/lm2e/bonito-irq.c new file mode 100644 index 00000000000..8fc3bce7075 --- /dev/null +++ b/arch/mips/lemote/lm2e/bonito-irq.c @@ -0,0 +1,74 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/mips-boards/bonito64.h> + + +static inline void bonito_irq_enable(unsigned int irq) +{ + BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE)); + mmiowb(); +} + +static inline void bonito_irq_disable(unsigned int irq) +{ + BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE)); + mmiowb(); +} + +static struct irq_chip bonito_irq_type = { + .name = "bonito_irq", + .ack = bonito_irq_disable, + .mask = bonito_irq_disable, + .mask_ack = bonito_irq_disable, + .unmask = bonito_irq_enable, +}; + +static struct irqaction dma_timeout_irqaction = { + .handler = no_action, + .name = "dma_timeout", +}; + +void bonito_irq_init(void) +{ + u32 i; + + for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) { + set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq); + } + + setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction); +} diff --git a/arch/mips/lemote/lm2e/dbg_io.c b/arch/mips/lemote/lm2e/dbg_io.c new file mode 100644 index 00000000000..6c95da3ca76 --- /dev/null +++ b/arch/mips/lemote/lm2e/dbg_io.c @@ -0,0 +1,146 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/types.h> + +#include <asm/serial.h> + +#define UART16550_BAUD_2400 2400 +#define UART16550_BAUD_4800 4800 +#define UART16550_BAUD_9600 9600 +#define UART16550_BAUD_19200 19200 +#define UART16550_BAUD_38400 38400 +#define UART16550_BAUD_57600 57600 +#define UART16550_BAUD_115200 115200 + +#define UART16550_PARITY_NONE 0 +#define UART16550_PARITY_ODD 0x08 +#define UART16550_PARITY_EVEN 0x18 +#define UART16550_PARITY_MARK 0x28 +#define UART16550_PARITY_SPACE 0x38 + +#define UART16550_DATA_5BIT 0x0 +#define UART16550_DATA_6BIT 0x1 +#define UART16550_DATA_7BIT 0x2 +#define UART16550_DATA_8BIT 0x3 + +#define UART16550_STOP_1BIT 0x0 +#define UART16550_STOP_2BIT 0x4 + +/* ----------------------------------------------------- */ + +/* === CONFIG === */ +#ifdef CONFIG_64BIT +#define BASE (0xffffffffbfd003f8) +#else +#define BASE (0xbfd003f8) +#endif + +#define MAX_BAUD BASE_BAUD +/* === END OF CONFIG === */ + +#define REG_OFFSET 1 + +/* register offset */ +#define OFS_RCV_BUFFER 0 +#define OFS_TRANS_HOLD 0 +#define OFS_SEND_BUFFER 0 +#define OFS_INTR_ENABLE (1*REG_OFFSET) +#define OFS_INTR_ID (2*REG_OFFSET) +#define OFS_DATA_FORMAT (3*REG_OFFSET) +#define OFS_LINE_CONTROL (3*REG_OFFSET) +#define OFS_MODEM_CONTROL (4*REG_OFFSET) +#define OFS_RS232_OUTPUT (4*REG_OFFSET) +#define OFS_LINE_STATUS (5*REG_OFFSET) +#define OFS_MODEM_STATUS (6*REG_OFFSET) +#define OFS_RS232_INPUT (6*REG_OFFSET) +#define OFS_SCRATCH_PAD (7*REG_OFFSET) + +#define OFS_DIVISOR_LSB (0*REG_OFFSET) +#define OFS_DIVISOR_MSB (1*REG_OFFSET) + +/* memory-mapped read/write of the port */ +#define UART16550_READ(y) readb((char *)BASE + (y)) +#define UART16550_WRITE(y, z) writeb(z, (char *)BASE + (y)) + +void debugInit(u32 baud, u8 data, u8 parity, u8 stop) +{ + u32 divisor; + + /* disable interrupts */ + UART16550_WRITE(OFS_INTR_ENABLE, 0); + + /* set up buad rate */ + /* set DIAB bit */ + UART16550_WRITE(OFS_LINE_CONTROL, 0x80); + + /* set divisor */ + divisor = MAX_BAUD / baud; + UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); + UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); + + /* clear DIAB bit */ + UART16550_WRITE(OFS_LINE_CONTROL, 0x0); + + /* set data format */ + UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); +} + +static int remoteDebugInitialized; + +u8 getDebugChar(void) +{ + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(UART16550_BAUD_115200, + UART16550_DATA_8BIT, + UART16550_PARITY_NONE, UART16550_STOP_1BIT); + } + + while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0) ; + return UART16550_READ(OFS_RCV_BUFFER); +} + +int putDebugChar(u8 byte) +{ + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + /* + debugInit(UART16550_BAUD_115200, + UART16550_DATA_8BIT, + UART16550_PARITY_NONE, UART16550_STOP_1BIT); */ + } + + while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0) ; + UART16550_WRITE(OFS_SEND_BUFFER, byte); + return 1; +} diff --git a/arch/mips/lemote/lm2e/irq.c b/arch/mips/lemote/lm2e/irq.c new file mode 100644 index 00000000000..05693bceaea --- /dev/null +++ b/arch/mips/lemote/lm2e/irq.c @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/i8259.h> +#include <asm/mipsregs.h> +#include <asm/mips-boards/bonito64.h> + + +/* + * the first level int-handler will jump here if it is a bonito irq + */ +static void bonito_irqdispatch(void) +{ + u32 int_status; + int i; + + /* workaround the IO dma problem: let cpu looping to allow DMA finish */ + int_status = BONITO_INTISR; + if (int_status & (1 << 10)) { + while (int_status & (1 << 10)) { + udelay(1); + int_status = BONITO_INTISR; + } + } + + /* Get pending sources, masked by current enables */ + int_status = BONITO_INTISR & BONITO_INTEN; + + if (int_status != 0) { + i = __ffs(int_status); + int_status &= ~(1 << i); + do_IRQ(BONITO_IRQ_BASE + i); + } +} + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = i8259_irq(); + if (irq >= 0) { + do_IRQ(irq); + } else { + spurious_interrupt(); + } + +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + + if (pending & CAUSEF_IP7) { + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + } else if (pending & CAUSEF_IP5) { + i8259_irqdispatch(); + } else if (pending & CAUSEF_IP2) { + bonito_irqdispatch(); + } else { + spurious_interrupt(); + } +} + +static struct irqaction cascade_irqaction = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + +void __init arch_init_irq(void) +{ + extern void bonito_irq_init(void); + + /* + * Clear all of the interrupts while we change the able around a bit. + * int-handler is not on bootstrap + */ + clear_c0_status(ST0_IM | ST0_BEV); + local_irq_disable(); + + /* most bonito irq should be level triggered */ + BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR | + BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; + BONITO_INTSTEER = 0; + + /* + * Mask out all interrupt by writing "1" to all bit position in + * the interrupt reset reg. + */ + BONITO_INTENCLR = ~0; + + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* + printk("GPIODATA=%x, GPIOIE=%x\n", BONITO_GPIODATA, BONITO_GPIOIE); + printk("INTEN=%x, INTSET=%x, INTCLR=%x, INTISR=%x\n", + BONITO_INTEN, BONITO_INTENSET, + BONITO_INTENCLR, BONITO_INTISR); + */ + + /* bonito irq at IP2 */ + setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction); + /* 8259 irq at IP5 */ + setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction); + +} diff --git a/arch/mips/lemote/lm2e/mem.c b/arch/mips/lemote/lm2e/mem.c new file mode 100644 index 00000000000..16cd21587d3 --- /dev/null +++ b/arch/mips/lemote/lm2e/mem.c @@ -0,0 +1,23 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/fs.h> +#include <linux/fcntl.h> +#include <linux/mm.h> + +/* override of arch/mips/mm/cache.c: __uncached_access */ +int __uncached_access(struct file *file, unsigned long addr) +{ + if (file->f_flags & O_SYNC) + return 1; + + /* + * On the Lemote Loongson 2e system, the peripheral registers + * reside between 0x1000:0000 and 0x2000:0000. + */ + return addr >= __pa(high_memory) || + ((addr >= 0x10000000) && (addr < 0x20000000)); +} diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c new file mode 100644 index 00000000000..1ade1cef389 --- /dev/null +++ b/arch/mips/lemote/lm2e/pci.c @@ -0,0 +1,93 @@ +/* + * pci.c + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/mips-boards/bonito64.h> + +extern struct pci_ops bonito64_pci_ops; + +static struct resource loongson2e_pci_mem_resource = { + .name = "LOONGSON2E PCI MEM", + .start = 0x14000000UL, + .end = 0x1fffffffUL, + .flags = IORESOURCE_MEM, +}; + +static struct resource loongson2e_pci_io_resource = { + .name = "LOONGSON2E PCI IO MEM", + .start = 0x00004000UL, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller loongson2e_pci_controller = { + .pci_ops = &bonito64_pci_ops, + .io_resource = &loongson2e_pci_io_resource, + .mem_resource = &loongson2e_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + +static void __init ict_pcimap(void) +{ + /* + * local to PCI mapping: [256M,512M] -> [256M,512M]; differ from PMON + * + * CPU address space [256M,448M] is window for accessing pci space + * we set pcimap_lo[0,1,2] to map it to pci space [256M,448M] + * pcimap: bit18,pcimap_2; bit[17-12],lo2;bit[11-6],lo1;bit[5-0],lo0 + */ + /* 1,00 0110 ,0001 01,00 0000 */ + BONITO_PCIMAP = 0x46140; + + /* 1, 00 0010, 0000,01, 00 0000 */ + /* BONITO_PCIMAP = 0x42040; */ + + /* + * PCI to local mapping: [2G,2G+256M] -> [0,256M] + */ + BONITO_PCIBASE0 = 0x80000000; + BONITO_PCIBASE1 = 0x00800000; + BONITO_PCIBASE2 = 0x90000000; + +} + +static int __init pcibios_init(void) +{ + extern int pci_probe_only; + pci_probe_only = 0; + + ict_pcimap(); + register_pci_controller(&loongson2e_pci_controller); + + return 0; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/lemote/lm2e/prom.c b/arch/mips/lemote/lm2e/prom.c new file mode 100644 index 00000000000..67312d7acf2 --- /dev/null +++ b/arch/mips/lemote/lm2e/prom.c @@ -0,0 +1,104 @@ +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/bootmem.h> + +#include <asm/addrspace.h> +#include <asm/bootinfo.h> + +extern unsigned long bus_clock; +extern unsigned long cpu_clock; +extern unsigned int memsize, highmemsize; +extern int putDebugChar(unsigned char byte); + +static int argc; +/* pmon passes arguments in 32bit pointers */ +static int *arg; +static int *env; + +const char *get_system_type(void) +{ + return "lemote-fulong"; +} + +void __init prom_init_cmdline(void) +{ + int i; + long l; + + /* arg[0] is "g", the rest is boot parameters */ + arcs_cmdline[0] = '\0'; + for (i = 1; i < argc; i++) { + l = (long)arg[i]; + if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) + >= sizeof(arcs_cmdline)) + break; + strcat(arcs_cmdline, ((char *)l)); + strcat(arcs_cmdline, " "); + } +} + +void __init prom_init(void) +{ + long l; + argc = fw_arg0; + arg = (int *)fw_arg1; + env = (int *)fw_arg2; + + mips_machgroup = MACH_GROUP_LEMOTE; + mips_machtype = MACH_LEMOTE_FULONG; + + prom_init_cmdline(); + + if ((strstr(arcs_cmdline, "console=")) == NULL) + strcat(arcs_cmdline, " console=ttyS0,115200"); + if ((strstr(arcs_cmdline, "root=")) == NULL) + strcat(arcs_cmdline, " root=/dev/hda1"); + +#define parse_even_earlier(res, option, p) \ +do { \ + if (strncmp(option, (char *)p, strlen(option)) == 0) \ + res = simple_strtol((char *)p + strlen(option"="), \ + NULL, 10); \ +} while (0) + + l = (long)*env; + while (l != 0) { + parse_even_earlier(bus_clock, "busclock", l); + parse_even_earlier(cpu_clock, "cpuclock", l); + parse_even_earlier(memsize, "memsize", l); + parse_even_earlier(highmemsize, "highmemsize", l); + env++; + l = (long)*env; + } + if (memsize == 0) + memsize = 256; + + pr_info("busclock=%ld, cpuclock=%ld,memsize=%d,highmemsize=%d\n", + bus_clock, cpu_clock, memsize, highmemsize); +} + +void __init prom_free_prom_memory(void) +{ +} + +void prom_putchar(char c) +{ + putDebugChar(c); +} diff --git a/arch/mips/lemote/lm2e/reset.c b/arch/mips/lemote/lm2e/reset.c new file mode 100644 index 00000000000..099387a3827 --- /dev/null +++ b/arch/mips/lemote/lm2e/reset.c @@ -0,0 +1,41 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/pm.h> + +#include <asm/reboot.h> + +static void loongson2e_restart(char *command) +{ +#ifdef CONFIG_32BIT + *(unsigned long *)0xbfe00104 &= ~(1 << 2); + *(unsigned long *)0xbfe00104 |= (1 << 2); +#else + *(unsigned long *)0xffffffffbfe00104 &= ~(1 << 2); + *(unsigned long *)0xffffffffbfe00104 |= (1 << 2); +#endif + __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); +} + +static void loongson2e_halt(void) +{ + while (1) ; +} + +static void loongson2e_power_off(void) +{ + loongson2e_halt(); +} + +void mips_reboot_setup(void) +{ + _machine_restart = loongson2e_restart; + _machine_halt = loongson2e_halt; + pm_power_off = loongson2e_power_off; +} diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c new file mode 100644 index 00000000000..0e4d1fa572b --- /dev/null +++ b/arch/mips/lemote/lm2e/setup.c @@ -0,0 +1,134 @@ +/* + * BRIEF MODULE DESCRIPTION + * setup.c - board dependent boot routines + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/bootmem.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/mc146818rtc.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/tty.h> +#include <linux/types.h> + +#include <asm/bootinfo.h> +#include <asm/mc146818-time.h> +#include <asm/time.h> +#include <asm/wbflush.h> + +#ifdef CONFIG_VT +#include <linux/console.h> +#include <linux/screen_info.h> +#endif + +extern void mips_reboot_setup(void); + +#ifdef CONFIG_64BIT +#define PTR_PAD(p) ((0xffffffff00000000)|((unsigned long long)(p))) +#else +#define PTR_PAD(p) (p) +#endif + +unsigned long cpu_clock; +unsigned long bus_clock; +unsigned int memsize; +unsigned int highmemsize = 0; + +void __init plat_timer_setup(struct irqaction *irq) +{ + setup_irq(MIPS_CPU_IRQ_BASE + 7, irq); +} + +static void __init loongson2e_time_init(void) +{ + /* setup mips r4k timer */ + mips_hpt_frequency = cpu_clock / 2; +} + +static unsigned long __init mips_rtc_get_time(void) +{ + return mc146818_get_cmos_time(); +} + +void (*__wbflush)(void); +EXPORT_SYMBOL(__wbflush); + +static void wbflush_loongson2e(void) +{ + asm(".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set mips3\n\t" + "sync\n\t" + "nop\n\t" + ".set\tpop\n\t" + ".set mips0\n\t"); +} + +void __init plat_mem_setup(void) +{ + set_io_port_base(PTR_PAD(0xbfd00000)); + + mips_reboot_setup(); + + board_time_init = loongson2e_time_init; + rtc_mips_get_time = mips_rtc_get_time; + + __wbflush = wbflush_loongson2e; + + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); +#ifdef CONFIG_64BIT + if (highmemsize > 0) { + add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM); + } +#endif + +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; + + screen_info = (struct screen_info) { + 0, 25, /* orig-x, orig-y */ + 0, /* unused */ + 0, /* orig-video-page */ + 0, /* orig-video-mode */ + 80, /* orig-video-cols */ + 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ + 25, /* orig-video-lines */ + VIDEO_TYPE_VGAC, /* orig-video-isVGA */ + 16 /* orig-video-points */ + }; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif + +} diff --git a/arch/mips/lib-32/Makefile b/arch/mips/lib-32/Makefile deleted file mode 100644 index 8b94d4cc5a3..00000000000 --- a/arch/mips/lib-32/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# -# Makefile for MIPS-specific library files.. -# - -lib-y += watch.o - -obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o -obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o -obj-$(CONFIG_CPU_NEVADA) += dump_tlb.o -obj-$(CONFIG_CPU_R10000) += dump_tlb.o -obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o -obj-$(CONFIG_CPU_R4300) += dump_tlb.o -obj-$(CONFIG_CPU_R4X00) += dump_tlb.o -obj-$(CONFIG_CPU_R5000) += dump_tlb.o -obj-$(CONFIG_CPU_R5432) += dump_tlb.o -obj-$(CONFIG_CPU_R6000) += -obj-$(CONFIG_CPU_R8000) += -obj-$(CONFIG_CPU_RM7000) += dump_tlb.o -obj-$(CONFIG_CPU_RM9000) += dump_tlb.o -obj-$(CONFIG_CPU_SB1) += dump_tlb.o -obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o -obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o -obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o diff --git a/arch/mips/lib-32/dump_tlb.c b/arch/mips/lib-32/dump_tlb.c deleted file mode 100644 index 6a68deb51aa..00000000000 --- a/arch/mips/lib-32/dump_tlb.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Dump R4x00 TLB for debugging purposes. - * - * Copyright (C) 1994, 1995 by Waldorf Electronics, written by Ralf Baechle. - * Copyright (C) 1999 by Silicon Graphics, Inc. - */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> -#include <asm/cachectl.h> -#include <asm/cpu.h> -#include <asm/mipsregs.h> -#include <asm/page.h> -#include <asm/pgtable.h> - -static inline const char *msk2str(unsigned int mask) -{ - switch (mask) { - case PM_4K: - return "4kb"; - case PM_16K: - return "16kb"; - case PM_64K: - return "64kb"; - case PM_256K: - return "256kb"; -#ifndef CONFIG_CPU_VR41XX - case PM_1M: - return "1Mb"; - case PM_4M: - return "4Mb"; - case PM_16M: - return "16Mb"; - case PM_64M: - return "64Mb"; - case PM_256M: - return "256Mb"; -#endif - } - - return "unknown"; -} - -#define BARRIER() \ - __asm__ __volatile__( \ - ".set\tnoreorder\n\t" \ - "nop;nop;nop;nop;nop;nop;nop\n\t" \ - ".set\treorder"); - -void dump_tlb(int first, int last) -{ - unsigned int pagemask, c0, c1, asid; - unsigned long long entrylo0, entrylo1; - unsigned long entryhi; - int i; - - asid = read_c0_entryhi() & 0xff; - - printk("\n"); - for (i = first; i <= last; i++) { - write_c0_index(i); - BARRIER(); - tlb_read(); - BARRIER(); - pagemask = read_c0_pagemask(); - entryhi = read_c0_entryhi(); - entrylo0 = read_c0_entrylo0(); - entrylo1 = read_c0_entrylo1(); - - /* Unused entries have a virtual address in KSEG0. */ - if ((entryhi & 0xf0000000) != 0x80000000 - && (entryhi & 0xff) == asid) { - /* - * Only print entries in use - */ - printk("Index: %2d pgmask=%s ", i, msk2str(pagemask)); - - c0 = (entrylo0 >> 3) & 7; - c1 = (entrylo1 >> 3) & 7; - - printk("va=%08lx asid=%02lx\n", - (entryhi & 0xffffe000), (entryhi & 0xff)); - printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n", - (entrylo0 << 6) & PAGE_MASK, c0, - (entrylo0 & 4) ? 1 : 0, - (entrylo0 & 2) ? 1 : 0, (entrylo0 & 1)); - printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n", - (entrylo1 << 6) & PAGE_MASK, c1, - (entrylo1 & 4) ? 1 : 0, - (entrylo1 & 2) ? 1 : 0, (entrylo1 & 1)); - printk("\n"); - } - } - - write_c0_entryhi(asid); -} - -void dump_tlb_all(void) -{ - dump_tlb(0, current_cpu_data.tlbsize - 1); -} - -void dump_tlb_wired(void) -{ - int wired; - - wired = read_c0_wired(); - printk("Wired: %d", wired); - dump_tlb(0, read_c0_wired()); -} - -void dump_tlb_addr(unsigned long addr) -{ - unsigned int flags, oldpid; - int index; - - local_irq_save(flags); - oldpid = read_c0_entryhi() & 0xff; - BARRIER(); - write_c0_entryhi((addr & PAGE_MASK) | oldpid); - BARRIER(); - tlb_probe(); - BARRIER(); - index = read_c0_index(); - write_c0_entryhi(oldpid); - local_irq_restore(flags); - - if (index < 0) { - printk("No entry for address 0x%08lx in TLB\n", addr); - return; - } - - printk("Entry %d maps address 0x%08lx\n", index, addr); - dump_tlb(index, index); -} - -void dump_tlb_nonwired(void) -{ - dump_tlb(read_c0_wired(), current_cpu_data.tlbsize - 1); -} - -void dump_list_process(struct task_struct *t, void *address) -{ - pgd_t *page_dir, *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte, page; - unsigned long addr, val; - - addr = (unsigned long) address; - - printk("Addr == %08lx\n", addr); - printk("task == %8p\n", t); - printk("task->mm == %8p\n", t->mm); - //printk("tasks->mm.pgd == %08x\n", (unsigned int) t->mm->pgd); - - if (addr > KSEG0) { - page_dir = pgd_offset_k(0); - pgd = pgd_offset_k(addr); - } else if (t->mm) { - page_dir = pgd_offset(t->mm, 0); - pgd = pgd_offset(t->mm, addr); - } else { - printk("Current thread has no mm\n"); - return; - } - printk("page_dir == %08x\n", (unsigned int) page_dir); - printk("pgd == %08x, ", (unsigned int) pgd); - pud = pud_offset(pgd, addr); - printk("pud == %08x, ", (unsigned int) pud); - - pmd = pmd_offset(pud, addr); - printk("pmd == %08x, ", (unsigned int) pmd); - - pte = pte_offset(pmd, addr); - printk("pte == %08x, ", (unsigned int) pte); - - page = *pte; -#ifdef CONFIG_64BIT_PHYS_ADDR - printk("page == %08Lx\n", pte_val(page)); -#else - printk("page == %08lx\n", pte_val(page)); -#endif - - val = pte_val(page); - if (val & _PAGE_PRESENT) - printk("present "); - if (val & _PAGE_READ) - printk("read "); - if (val & _PAGE_WRITE) - printk("write "); - if (val & _PAGE_ACCESSED) - printk("accessed "); - if (val & _PAGE_MODIFIED) - printk("modified "); - if (val & _PAGE_R4KBUG) - printk("r4kbug "); - if (val & _PAGE_GLOBAL) - printk("global "); - if (val & _PAGE_VALID) - printk("valid "); - printk("\n"); -} - -void dump_list_current(void *address) -{ - dump_list_process(current, address); -} - -unsigned int vtop(void *address) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - unsigned int addr, paddr; - - addr = (unsigned long) address; - pgd = pgd_offset(current->mm, addr); - pud = pud_offset(pgd, addr); - pmd = pmd_offset(pud, addr); - pte = pte_offset(pmd, addr); - paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK; - paddr |= (addr & ~PAGE_MASK); - - return paddr; -} - -void dump16(unsigned long *p) -{ - int i; - - for (i = 0; i < 8; i++) { - printk("*%08lx == %08lx, ", (unsigned long) p, *p); - p++; - printk("*%08lx == %08lx\n", (unsigned long) p, *p); - p++; - } -} diff --git a/arch/mips/lib-32/r3k_dump_tlb.c b/arch/mips/lib-32/r3k_dump_tlb.c deleted file mode 100644 index 4f2cb74f076..00000000000 --- a/arch/mips/lib-32/r3k_dump_tlb.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * Dump R3000 TLB for debugging purposes. - * - * Copyright (C) 1994, 1995 by Waldorf Electronics, written by Ralf Baechle. - * Copyright (C) 1999 by Silicon Graphics, Inc. - * Copyright (C) 1999 by Harald Koerfgen - */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> -#include <asm/cachectl.h> -#include <asm/cpu.h> -#include <asm/mipsregs.h> -#include <asm/page.h> -#include <asm/pgtable.h> - -extern int r3k_have_wired_reg; /* defined in tlb-r3k.c */ - -void dump_tlb(int first, int last) -{ - int i; - unsigned int asid; - unsigned long entryhi, entrylo0; - - asid = read_c0_entryhi() & 0xfc0; - - for (i = first; i <= last; i++) { - write_c0_index(i<<8); - __asm__ __volatile__( - ".set\tnoreorder\n\t" - "tlbr\n\t" - "nop\n\t" - ".set\treorder"); - entryhi = read_c0_entryhi(); - entrylo0 = read_c0_entrylo0(); - - /* Unused entries have a virtual address of KSEG0. */ - if ((entryhi & 0xffffe000) != 0x80000000 - && (entryhi & 0xfc0) == asid) { - /* - * Only print entries in use - */ - printk("Index: %2d ", i); - - printk("va=%08lx asid=%08lx" - " [pa=%06lx n=%d d=%d v=%d g=%d]", - (entryhi & 0xffffe000), - entryhi & 0xfc0, - entrylo0 & PAGE_MASK, - (entrylo0 & (1 << 11)) ? 1 : 0, - (entrylo0 & (1 << 10)) ? 1 : 0, - (entrylo0 & (1 << 9)) ? 1 : 0, - (entrylo0 & (1 << 8)) ? 1 : 0); - } - } - printk("\n"); - - write_c0_entryhi(asid); -} - -void dump_tlb_all(void) -{ - dump_tlb(0, current_cpu_data.tlbsize - 1); -} - -void dump_tlb_wired(void) -{ - int wired = r3k_have_wired_reg ? read_c0_wired() : 8; - - printk("Wired: %d", wired); - dump_tlb(0, wired - 1); -} - -void dump_tlb_addr(unsigned long addr) -{ - unsigned long flags, oldpid; - int index; - - local_irq_save(flags); - oldpid = read_c0_entryhi() & 0xff; - write_c0_entryhi((addr & PAGE_MASK) | oldpid); - tlb_probe(); - index = read_c0_index(); - write_c0_entryhi(oldpid); - local_irq_restore(flags); - - if (index < 0) { - printk("No entry for address 0x%08lx in TLB\n", addr); - return; - } - - printk("Entry %d maps address 0x%08lx\n", index, addr); - dump_tlb(index, index); -} - -void dump_tlb_nonwired(void) -{ - int wired = r3k_have_wired_reg ? read_c0_wired() : 8; - dump_tlb(wired, current_cpu_data.tlbsize - 1); -} - -void dump_list_process(struct task_struct *t, void *address) -{ - pgd_t *page_dir, *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte, page; - unsigned int addr; - unsigned long val; - - addr = (unsigned int) address; - - printk("Addr == %08x\n", addr); - printk("tasks->mm.pgd == %08x\n", (unsigned int) t->mm->pgd); - - page_dir = pgd_offset(t->mm, 0); - printk("page_dir == %08x\n", (unsigned int) page_dir); - - pgd = pgd_offset(t->mm, addr); - printk("pgd == %08x, ", (unsigned int) pgd); - - pud = pud_offset(pgd, addr); - printk("pud == %08x, ", (unsigned int) pud); - - pmd = pmd_offset(pud, addr); - printk("pmd == %08x, ", (unsigned int) pmd); - - pte = pte_offset(pmd, addr); - printk("pte == %08x, ", (unsigned int) pte); - - page = *pte; - printk("page == %08x\n", (unsigned int) pte_val(page)); - - val = pte_val(page); - if (val & _PAGE_PRESENT) printk("present "); - if (val & _PAGE_READ) printk("read "); - if (val & _PAGE_WRITE) printk("write "); - if (val & _PAGE_ACCESSED) printk("accessed "); - if (val & _PAGE_MODIFIED) printk("modified "); - if (val & _PAGE_GLOBAL) printk("global "); - if (val & _PAGE_VALID) printk("valid "); - printk("\n"); -} - -void dump_list_current(void *address) -{ - dump_list_process(current, address); -} - -unsigned int vtop(void *address) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - unsigned int addr, paddr; - - addr = (unsigned long) address; - pgd = pgd_offset(current->mm, addr); - pud = pud_offset(pgd, addr); - pmd = pmd_offset(pud, addr); - pte = pte_offset(pmd, addr); - paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK; - paddr |= (addr & ~PAGE_MASK); - - return paddr; -} - -void dump16(unsigned long *p) -{ - int i; - - for (i = 0; i < 8; i++) { - printk("*%08lx == %08lx, ", (unsigned long)p, *p); - p++; - printk("*%08lx == %08lx\n", (unsigned long)p, *p); - p++; - } -} diff --git a/arch/mips/lib-32/watch.S b/arch/mips/lib-32/watch.S deleted file mode 100644 index 808b3af1a60..00000000000 --- a/arch/mips/lib-32/watch.S +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Kernel debug stuff to use the Watch registers. - * Useful to find stack overflows, dangling pointers etc. - * - * Copyright (C) 1995, 1996, 1999 by Ralf Baechle - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> - - .set noreorder -/* - * Parameter: a0 - logic address to watch - * Currently only KSEG0 addresses are allowed! - * a1 - set bit #1 to trap on load references - * bit #0 to trap on store references - * Results : none - */ - LEAF(__watch_set) - li t0, 0x80000000 - subu a0, t0 - ori a0, 7 - xori a0, 7 - or a0, a1 - mtc0 a0, CP0_WATCHLO - sw a0, watch_savelo - - jr ra - mtc0 zero, CP0_WATCHHI - END(__watch_set) - -/* - * Parameter: none - * Results : none - */ - LEAF(__watch_clear) - jr ra - mtc0 zero, CP0_WATCHLO - END(__watch_clear) - -/* - * Parameter: none - * Results : none - */ - LEAF(__watch_reenable) - lw t0, watch_savelo - jr ra - mtc0 t0, CP0_WATCHLO - END(__watch_reenable) - -/* - * Saved value of the c0_watchlo register for watch_reenable() - */ - .data -watch_savelo: .word 0 - .text diff --git a/arch/mips/lib-64/Makefile b/arch/mips/lib-64/Makefile deleted file mode 100644 index 8b94d4cc5a3..00000000000 --- a/arch/mips/lib-64/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# -# Makefile for MIPS-specific library files.. -# - -lib-y += watch.o - -obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o -obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o -obj-$(CONFIG_CPU_NEVADA) += dump_tlb.o -obj-$(CONFIG_CPU_R10000) += dump_tlb.o -obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o -obj-$(CONFIG_CPU_R4300) += dump_tlb.o -obj-$(CONFIG_CPU_R4X00) += dump_tlb.o -obj-$(CONFIG_CPU_R5000) += dump_tlb.o -obj-$(CONFIG_CPU_R5432) += dump_tlb.o -obj-$(CONFIG_CPU_R6000) += -obj-$(CONFIG_CPU_R8000) += -obj-$(CONFIG_CPU_RM7000) += dump_tlb.o -obj-$(CONFIG_CPU_RM9000) += dump_tlb.o -obj-$(CONFIG_CPU_SB1) += dump_tlb.o -obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o -obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o -obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o diff --git a/arch/mips/lib-64/dump_tlb.c b/arch/mips/lib-64/dump_tlb.c deleted file mode 100644 index 594df1a05ec..00000000000 --- a/arch/mips/lib-64/dump_tlb.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Dump R4x00 TLB for debugging purposes. - * - * Copyright (C) 1994, 1995 by Waldorf Electronics, written by Ralf Baechle. - * Copyright (C) 1999 by Silicon Graphics, Inc. - */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> -#include <asm/cachectl.h> -#include <asm/cpu.h> -#include <asm/mipsregs.h> -#include <asm/page.h> -#include <asm/pgtable.h> - -static inline const char *msk2str(unsigned int mask) -{ - switch (mask) { - case PM_4K: return "4kb"; - case PM_16K: return "16kb"; - case PM_64K: return "64kb"; - case PM_256K: return "256kb"; -#ifndef CONFIG_CPU_VR41XX - case PM_1M: return "1Mb"; - case PM_4M: return "4Mb"; - case PM_16M: return "16Mb"; - case PM_64M: return "64Mb"; - case PM_256M: return "256Mb"; -#endif - } - - return "unknown"; -} - -#define BARRIER() \ - __asm__ __volatile__( \ - ".set\tnoreorder\n\t" \ - "nop;nop;nop;nop;nop;nop;nop\n\t" \ - ".set\treorder"); - -void dump_tlb(int first, int last) -{ - unsigned long s_entryhi, entryhi, entrylo0, entrylo1, asid; - unsigned int s_index, pagemask, c0, c1, i; - - s_entryhi = read_c0_entryhi(); - s_index = read_c0_index(); - asid = s_entryhi & 0xff; - - for (i = first; i <= last; i++) { - write_c0_index(i); - BARRIER(); - tlb_read(); - BARRIER(); - pagemask = read_c0_pagemask(); - entryhi = read_c0_entryhi(); - entrylo0 = read_c0_entrylo0(); - entrylo1 = read_c0_entrylo1(); - - /* Unused entries have a virtual address of CKSEG0. */ - if ((entryhi & ~0x1ffffUL) != CKSEG0 - && (entryhi & 0xff) == asid) { - /* - * Only print entries in use - */ - printk("Index: %2d pgmask=%s ", i, msk2str(pagemask)); - - c0 = (entrylo0 >> 3) & 7; - c1 = (entrylo1 >> 3) & 7; - - printk("va=%011lx asid=%02lx\n", - (entryhi & ~0x1fffUL), - entryhi & 0xff); - printk("\t[pa=%011lx c=%d d=%d v=%d g=%ld] ", - (entrylo0 << 6) & PAGE_MASK, c0, - (entrylo0 & 4) ? 1 : 0, - (entrylo0 & 2) ? 1 : 0, - (entrylo0 & 1)); - printk("[pa=%011lx c=%d d=%d v=%d g=%ld]\n", - (entrylo1 << 6) & PAGE_MASK, c1, - (entrylo1 & 4) ? 1 : 0, - (entrylo1 & 2) ? 1 : 0, - (entrylo1 & 1)); - } - } - printk("\n"); - - write_c0_entryhi(s_entryhi); - write_c0_index(s_index); -} - -void dump_tlb_all(void) -{ - dump_tlb(0, current_cpu_data.tlbsize - 1); -} - -void dump_tlb_wired(void) -{ - int wired; - - wired = read_c0_wired(); - printk("Wired: %d", wired); - dump_tlb(0, read_c0_wired()); -} - -void dump_tlb_addr(unsigned long addr) -{ - unsigned int flags, oldpid; - int index; - - local_irq_save(flags); - oldpid = read_c0_entryhi() & 0xff; - BARRIER(); - write_c0_entryhi((addr & PAGE_MASK) | oldpid); - BARRIER(); - tlb_probe(); - BARRIER(); - index = read_c0_index(); - write_c0_entryhi(oldpid); - local_irq_restore(flags); - - if (index < 0) { - printk("No entry for address 0x%08lx in TLB\n", addr); - return; - } - - printk("Entry %d maps address 0x%08lx\n", index, addr); - dump_tlb(index, index); -} - -void dump_tlb_nonwired(void) -{ - dump_tlb(read_c0_wired(), current_cpu_data.tlbsize - 1); -} - -void dump_list_process(struct task_struct *t, void *address) -{ - pgd_t *page_dir, *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte, page; - unsigned long addr, val; - - addr = (unsigned long) address; - - printk("Addr == %08lx\n", addr); - printk("tasks->mm.pgd == %08lx\n", (unsigned long) t->mm->pgd); - - page_dir = pgd_offset(t->mm, 0UL); - printk("page_dir == %016lx\n", (unsigned long) page_dir); - - pgd = pgd_offset(t->mm, addr); - printk("pgd == %016lx\n", (unsigned long) pgd); - - pud = pud_offset(pgd, addr); - printk("pud == %016lx\n", (unsigned long) pud); - - pmd = pmd_offset(pud, addr); - printk("pmd == %016lx\n", (unsigned long) pmd); - - pte = pte_offset(pmd, addr); - printk("pte == %016lx\n", (unsigned long) pte); - - page = *pte; - printk("page == %08lx\n", pte_val(page)); - - val = pte_val(page); - if (val & _PAGE_PRESENT) printk("present "); - if (val & _PAGE_READ) printk("read "); - if (val & _PAGE_WRITE) printk("write "); - if (val & _PAGE_ACCESSED) printk("accessed "); - if (val & _PAGE_MODIFIED) printk("modified "); - if (val & _PAGE_R4KBUG) printk("r4kbug "); - if (val & _PAGE_GLOBAL) printk("global "); - if (val & _PAGE_VALID) printk("valid "); - printk("\n"); -} - -void dump_list_current(void *address) -{ - dump_list_process(current, address); -} - -unsigned long vtop(void *address) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - unsigned long addr, paddr; - - addr = (unsigned long) address; - pgd = pgd_offset(current->mm, addr); - pud = pud_offset(pgd, addr); - pmd = pmd_offset(pud, addr); - pte = pte_offset(pmd, addr); - paddr = (CKSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK; - paddr |= (addr & ~PAGE_MASK); - - return paddr; -} - -void dump16(unsigned long *p) -{ - int i; - - for (i = 0; i < 8; i++) { - printk("*%08lx == %08lx, ", (unsigned long)p, *p); - p++; - printk("*%08lx == %08lx\n", (unsigned long)p, *p); - p++; - } -} diff --git a/arch/mips/lib-64/watch.S b/arch/mips/lib-64/watch.S deleted file mode 100644 index f9143401369..00000000000 --- a/arch/mips/lib-64/watch.S +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Kernel debug stuff to use the Watch registers. - * Useful to find stack overflows, dangling pointers etc. - * - * Copyright (C) 1995, 1996, 1999, 2001 by Ralf Baechle - */ -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> - - .set noreorder -/* - * Parameter: a0 - physical address to watch - * a1 - set bit #1 to trap on load references - * bit #0 to trap on store references - * Results : none - */ - LEAF(__watch_set) - ori a0, 7 - xori a0, 7 - or a0, a1 - mtc0 a0, CP0_WATCHLO - sd a0, watch_savelo - dsrl32 a0, a0, 0 - - jr ra - mtc0 zero, CP0_WATCHHI - END(__watch_set) - -/* - * Parameter: none - * Results : none - */ - LEAF(__watch_clear) - jr ra - mtc0 zero, CP0_WATCHLO - END(__watch_clear) - -/* - * Parameter: none - * Results : none - */ - LEAF(__watch_reenable) - ld t0, watch_savelo - jr ra - mtc0 t0, CP0_WATCHLO - END(__watch_reenable) - -/* - * Saved value of the c0_watchlo register for watch_reenable() - */ - .local watch_savelo - .comm watch_savelo, 8, 8 diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 5dad13efba7..91ed1eb3310 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -8,5 +8,24 @@ lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \ obj-y += iomap.o obj-$(CONFIG_PCI) += iomap-pci.o +obj-$(CONFIG_CPU_LOONGSON2) += dump_tlb.o +obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o +obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o +obj-$(CONFIG_CPU_NEVADA) += dump_tlb.o +obj-$(CONFIG_CPU_R10000) += dump_tlb.o +obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o +obj-$(CONFIG_CPU_R4300) += dump_tlb.o +obj-$(CONFIG_CPU_R4X00) += dump_tlb.o +obj-$(CONFIG_CPU_R5000) += dump_tlb.o +obj-$(CONFIG_CPU_R5432) += dump_tlb.o +obj-$(CONFIG_CPU_R6000) += +obj-$(CONFIG_CPU_R8000) += +obj-$(CONFIG_CPU_RM7000) += dump_tlb.o +obj-$(CONFIG_CPU_RM9000) += dump_tlb.o +obj-$(CONFIG_CPU_SB1) += dump_tlb.o +obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o +obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o +obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o + # libgcc-style stuff needed in the kernel -lib-y += ashldi3.o ashrdi3.o lshrdi3.o ucmpdi2.o +obj-y += ashldi3.o ashrdi3.o lshrdi3.o ucmpdi2.o diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c new file mode 100644 index 00000000000..1a4db7dc77c --- /dev/null +++ b/arch/mips/lib/dump_tlb.c @@ -0,0 +1,100 @@ +/* + * Dump R4x00 TLB for debugging purposes. + * + * Copyright (C) 1994, 1995 by Waldorf Electronics, written by Ralf Baechle. + * Copyright (C) 1999 by Silicon Graphics, Inc. + */ +#include <linux/kernel.h> +#include <linux/mm.h> + +#include <asm/mipsregs.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +static inline const char *msk2str(unsigned int mask) +{ + switch (mask) { + case PM_4K: return "4kb"; + case PM_16K: return "16kb"; + case PM_64K: return "64kb"; + case PM_256K: return "256kb"; +#ifndef CONFIG_CPU_VR41XX + case PM_1M: return "1Mb"; + case PM_4M: return "4Mb"; + case PM_16M: return "16Mb"; + case PM_64M: return "64Mb"; + case PM_256M: return "256Mb"; +#endif + } + return ""; +} + +#define BARRIER() \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + "nop;nop;nop;nop;nop;nop;nop\n\t" \ + ".set\treorder"); + +static void dump_tlb(int first, int last) +{ + unsigned long s_entryhi, entryhi, asid; + unsigned long long entrylo0, entrylo1; + unsigned int s_index, pagemask, c0, c1, i; + + s_entryhi = read_c0_entryhi(); + s_index = read_c0_index(); + asid = s_entryhi & 0xff; + + for (i = first; i <= last; i++) { + write_c0_index(i); + BARRIER(); + tlb_read(); + BARRIER(); + pagemask = read_c0_pagemask(); + entryhi = read_c0_entryhi(); + entrylo0 = read_c0_entrylo0(); + entrylo1 = read_c0_entrylo1(); + + /* Unused entries have a virtual address of CKSEG0. */ + if ((entryhi & ~0x1ffffUL) != CKSEG0 + && (entryhi & 0xff) == asid) { +#ifdef CONFIG_32BIT + int width = 8; +#else + int width = 11; +#endif + /* + * Only print entries in use + */ + printk("Index: %2d pgmask=%s ", i, msk2str(pagemask)); + + c0 = (entrylo0 >> 3) & 7; + c1 = (entrylo1 >> 3) & 7; + + printk("va=%0*lx asid=%02lx\n", + width, (entryhi & ~0x1fffUL), + entryhi & 0xff); + printk("\t[pa=%0*llx c=%d d=%d v=%d g=%d] ", + width, + (entrylo0 << 6) & PAGE_MASK, c0, + (entrylo0 & 4) ? 1 : 0, + (entrylo0 & 2) ? 1 : 0, + (entrylo0 & 1) ? 1 : 0); + printk("[pa=%0*llx c=%d d=%d v=%d g=%d]\n", + width, + (entrylo1 << 6) & PAGE_MASK, c1, + (entrylo1 & 4) ? 1 : 0, + (entrylo1 & 2) ? 1 : 0, + (entrylo1 & 1) ? 1 : 0); + } + } + printk("\n"); + + write_c0_entryhi(s_entryhi); + write_c0_index(s_index); +} + +void dump_tlb_all(void) +{ + dump_tlb(0, current_cpu_data.tlbsize - 1); +} diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c new file mode 100644 index 00000000000..52f87795ecc --- /dev/null +++ b/arch/mips/lib/r3k_dump_tlb.c @@ -0,0 +1,62 @@ +/* + * Dump R3000 TLB for debugging purposes. + * + * Copyright (C) 1994, 1995 by Waldorf Electronics, written by Ralf Baechle. + * Copyright (C) 1999 by Silicon Graphics, Inc. + * Copyright (C) 1999 by Harald Koerfgen + */ +#include <linux/kernel.h> +#include <linux/mm.h> + +#include <asm/mipsregs.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +extern int r3k_have_wired_reg; /* defined in tlb-r3k.c */ + +static void dump_tlb(int first, int last) +{ + int i; + unsigned int asid; + unsigned long entryhi, entrylo0; + + asid = read_c0_entryhi() & 0xfc0; + + for (i = first; i <= last; i++) { + write_c0_index(i<<8); + __asm__ __volatile__( + ".set\tnoreorder\n\t" + "tlbr\n\t" + "nop\n\t" + ".set\treorder"); + entryhi = read_c0_entryhi(); + entrylo0 = read_c0_entrylo0(); + + /* Unused entries have a virtual address of KSEG0. */ + if ((entryhi & 0xffffe000) != 0x80000000 + && (entryhi & 0xfc0) == asid) { + /* + * Only print entries in use + */ + printk("Index: %2d ", i); + + printk("va=%08lx asid=%08lx" + " [pa=%06lx n=%d d=%d v=%d g=%d]", + (entryhi & 0xffffe000), + entryhi & 0xfc0, + entrylo0 & PAGE_MASK, + (entrylo0 & (1 << 11)) ? 1 : 0, + (entrylo0 & (1 << 10)) ? 1 : 0, + (entrylo0 & (1 << 9)) ? 1 : 0, + (entrylo0 & (1 << 8)) ? 1 : 0); + } + } + printk("\n"); + + write_c0_entryhi(asid); +} + +void dump_tlb_all(void) +{ + dump_tlb(0, current_cpu_data.tlbsize - 1); +} diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 80531b35cd6..d7f05b0abe1 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -35,6 +35,7 @@ * better performance by compiling with -msoft-float! */ #include <linux/sched.h> +#include <linux/debugfs.h> #include <asm/inst.h> #include <asm/bootinfo.h> @@ -1277,3 +1278,36 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, return sig; } + +#ifdef CONFIG_DEBUG_FS +extern struct dentry *mips_debugfs_dir; +static int __init debugfs_fpuemu(void) +{ + struct dentry *d, *dir; + int i; + static struct { + const char *name; + unsigned int *v; + } vars[] __initdata = { + { "emulated", &fpuemustats.emulated }, + { "loads", &fpuemustats.loads }, + { "stores", &fpuemustats.stores }, + { "cp1ops", &fpuemustats.cp1ops }, + { "cp1xops", &fpuemustats.cp1xops }, + { "errors", &fpuemustats.errors }, + }; + + if (!mips_debugfs_dir) + return -ENODEV; + dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); + if (IS_ERR(dir)) + return PTR_ERR(dir); + for (i = 0; i < ARRAY_SIZE(vars); i++) { + d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v); + if (IS_ERR(d)) + return PTR_ERR(d); + } + return 0; +} +__initcall(debugfs_fpuemu); +#endif diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 377d9e8f250..a242b0fc377 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,6 +19,7 @@ # under Linux. # -obj-y := malta_int.o malta_setup.o +obj-y := malta_int.o malta_platform.o malta_setup.o + obj-$(CONFIG_MTD) += malta_mtd.o obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o diff --git a/arch/mips/mips-boards/malta/malta_platform.c b/arch/mips/mips-boards/malta/malta_platform.c new file mode 100644 index 00000000000..83b9bab3cd3 --- /dev/null +++ b/arch/mips/mips-boards/malta/malta_platform.c @@ -0,0 +1,65 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * written by Ralf Baechle (ralf@linux-mips.org) + * + * Probe driver for the Malta's UART ports: + * + * o 2 ports in the SMC SuperIO + * o 1 port in the CBUS UART, a discrete 16550 which normally is only used + * for bringups. + * + * We don't use 8250_platform.c on Malta as it would result in the CBUS + * UART becoming ttyS0. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/serial_8250.h> + +#define SMC_PORT(base, int) \ +{ \ + .iobase = base, \ + .irq = int, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define CBUS_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) + +static struct plat_serial8250_port uart8250_data[] = { + SMC_PORT(0x3F8, 4), + SMC_PORT(0x2F8, 3), + { + .mapbase = 0x1f000900, /* The CBUS UART */ + .irq = MIPS_CPU_IRQ_BASE + 2, + .uartclk = 3686400, /* Twice the usual clk! */ + .iotype = UPIO_MEM32, + .flags = CBUS_UART_FLAGS, + .regshift = 3, + }, + { }, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = uart8250_data, + }, +}; + +static int __init uart8250_init(void) +{ + return platform_device_register(&uart8250_device); +} + +module_init(uart8250_init); + +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART"); diff --git a/arch/mips/mips-boards/sim/Makefile b/arch/mips/mipssim/Makefile index dc0bfda1142..dc0bfda1142 100644 --- a/arch/mips/mips-boards/sim/Makefile +++ b/arch/mips/mipssim/Makefile diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mipssim/sim_cmdline.c index c63021a5dc6..c63021a5dc6 100644 --- a/arch/mips/mips-boards/sim/sim_cmdline.c +++ b/arch/mips/mipssim/sim_cmdline.c diff --git a/arch/mips/mips-boards/sim/sim_console.c b/arch/mips/mipssim/sim_console.c index de595a9ccb2..a2f41672cd5 100644 --- a/arch/mips/mips-boards/sim/sim_console.c +++ b/arch/mips/mipssim/sim_console.c @@ -18,8 +18,8 @@ * written by Ralf Baechle */ #include <linux/init.h> +#include <linux/io.h> #include <linux/serial_reg.h> -#include <asm/io.h> static inline unsigned int serial_in(int offset) { diff --git a/arch/mips/mipssim/sim_int.c b/arch/mips/mipssim/sim_int.c new file mode 100644 index 00000000000..d86b37235cf --- /dev/null +++ b/arch/mips/mipssim/sim_int.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <asm/mips-boards/simint.h> +#include <asm/irq_cpu.h> + +static inline int clz(unsigned long x) +{ + __asm__ ( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = s0 & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + s0 = s0 << t0; + + t0 = s0 & 0x8000; + t0 = t0 < 1; + /* t0 = t0 << 2; */ + a0 = a0 - t0; + /* s0 = s0 << t0; */ + + return a0; +#endif +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq > 0) + do_IRQ(MIPSCPU_INT_BASE + irq); + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); +} diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mipssim/sim_mem.c index e408ef0bcd6..2312483eb83 100644 --- a/arch/mips/mips-boards/sim/sim_mem.c +++ b/arch/mips/mipssim/sim_mem.c @@ -95,7 +95,7 @@ void __init prom_meminit(void) size = p->size; add_memory_region(base, size, type); - p++; + p++; } } diff --git a/arch/mips/mips-boards/sim/sim_platform.c b/arch/mips/mipssim/sim_platform.c index 53210a8c5de..53210a8c5de 100644 --- a/arch/mips/mips-boards/sim/sim_platform.c +++ b/arch/mips/mipssim/sim_platform.c diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mipssim/sim_setup.c index b705f09e57c..3643582bdad 100644 --- a/arch/mips/mips-boards/sim/sim_setup.c +++ b/arch/mips/mipssim/sim_setup.c @@ -19,18 +19,18 @@ #include <linux/init.h> #include <linux/string.h> #include <linux/kernel.h> +#include <linux/io.h> +#include <linux/irq.h> #include <linux/ioport.h> +#include <linux/serial.h> #include <linux/tty.h> #include <linux/serial.h> #include <linux/serial_core.h> #include <asm/cpu.h> #include <asm/bootinfo.h> -#include <asm/irq.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/prom.h> -#include <asm/serial.h> -#include <asm/io.h> #include <asm/time.h> #include <asm/mips-boards/sim.h> #include <asm/mips-boards/simint.h> @@ -62,7 +62,7 @@ void __init plat_mem_setup(void) #endif } -void prom_init(void) +void __init prom_init(void) { set_io_port_base(0xbfd00000); diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mipssim/sim_smp.c index cb47863ecf1..38fa807b99f 100644 --- a/arch/mips/mips-boards/sim/sim_smp.c +++ b/arch/mips/mipssim/sim_smp.c @@ -22,13 +22,13 @@ #include <linux/sched.h> #include <linux/cpumask.h> #include <linux/interrupt.h> +#include <linux/smp.h> + #include <asm/atomic.h> #include <asm/cpu.h> #include <asm/processor.h> #include <asm/system.h> -#include <asm/hardirq.h> #include <asm/mmu_context.h> -#include <asm/smp.h> #ifdef CONFIG_MIPS_MT_SMTC #include <asm/smtc_ipi.h> #endif /* CONFIG_MIPS_MT_SMTC */ @@ -73,11 +73,19 @@ void prom_init_secondary(void) #endif /* CONFIG_MIPS_MT_SMTC */ } +void plat_smp_setup(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + if (read_c0_config3() & (1 << 2)) + mipsmt_build_cpu_map(0); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + /* * Platform SMP pre-initialization */ -void prom_prepare_cpus(unsigned int max_cpus) +void plat_prepare_cpus(unsigned int max_cpus) { #ifdef CONFIG_MIPS_MT_SMTC /* @@ -85,8 +93,8 @@ void prom_prepare_cpus(unsigned int max_cpus) * but it may be multithreaded. */ - if (read_c0_config3() & (1<<2)) { - mipsmt_prepare_cpus(max_cpus); + if (read_c0_config3() & (1 << 2)) { + mipsmt_prepare_cpus(); } #endif /* CONFIG_MIPS_MT_SMTC */ } diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mipssim/sim_time.c index 7224ffe31d3..874a18e8ac2 100644 --- a/arch/mips/mips-boards/sim/sim_time.c +++ b/arch/mips/mipssim/sim_time.c @@ -5,10 +5,10 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/mc146818rtc.h> +#include <linux/mipsregs.h> +#include <linux/smp.h> #include <linux/timex.h> -#include <asm/mipsregs.h> -#include <asm/ptrace.h> #include <asm/hardirq.h> #include <asm/div64.h> #include <asm/cpu.h> @@ -16,7 +16,6 @@ #include <asm/irq.h> #include <asm/mc146818-time.h> #include <asm/msc01_ic.h> -#include <asm/smp.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/prom.h> @@ -37,8 +36,7 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id) #ifndef CONFIG_MIPS_MT_SMTC if (cpu == 0) { timer_interrupt(irq, dev_id); - } - else { + } else { /* Everyone else needs to reset the timer int here as ll_local_timer_interrupt doesn't */ /* @@ -76,8 +74,10 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id) irq_enable_hazard(); evpe(vpflags); - if(cpu_data[cpu].vpe_id == 0) timer_interrupt(irq, dev_id); - else write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); + if (cpu_data[cpu].vpe_id == 0) + timer_interrupt(irq, dev_id); + else + write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); smtc_timer_broadcast(cpu_data[cpu].vpe_id); #endif /* CONFIG_MIPS_MT_SMTC */ @@ -85,7 +85,8 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id) /* * every CPU should do profiling and process accounting */ - local_timer_interrupt (irq, dev_id); + local_timer_interrupt (irq, dev_id); + return IRQ_HANDLED; #else return timer_interrupt (irq, dev_id); @@ -152,17 +153,15 @@ void __init sim_time_init(void) local_irq_save(flags); - - /* Set Data mode - binary. */ + /* Set Data mode - binary. */ CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); - est_freq = estimate_cpu_frequency (); - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); + printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000, + (est_freq % 1000000) * 100 / 1000000); - cpu_khz = est_freq / 1000; + cpu_khz = est_freq / 1000; local_irq_restore(flags); } @@ -180,8 +179,7 @@ void __init plat_timer_setup(struct irqaction *irq) if (cpu_has_veic) { set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; - } - else { + } else { if (cpu_has_vint) set_vi_handler(cp0_compare_irq, mips_timer_dispatch); mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 293697b1560..19a0e544c4e 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o obj-$(CONFIG_HIGHMEM) += highmem.o +obj-$(CONFIG_CPU_LOONGSON2) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o obj-$(CONFIG_CPU_MIPS32) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o obj-$(CONFIG_CPU_MIPS64) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o obj-$(CONFIG_CPU_NEVADA) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index df04a315d83..be96231dccb 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -335,6 +335,10 @@ static void r4k_flush_cache_all(void) static inline void local_r4k___flush_cache_all(void * args) { +#if defined(CONFIG_CPU_LOONGSON2) + r4k_blast_scache(); + return; +#endif r4k_blast_dcache(); r4k_blast_icache(); @@ -848,6 +852,24 @@ static void __init probe_pcache(void) c->options |= MIPS_CPU_PREFETCH; break; + case CPU_LOONGSON2: + icache_size = 1 << (12 + ((config & CONF_IC) >> 9)); + c->icache.linesz = 16 << ((config & CONF_IB) >> 5); + if (prid & 0x3) + c->icache.ways = 4; + else + c->icache.ways = 2; + c->icache.waybit = 0; + + dcache_size = 1 << (12 + ((config & CONF_DC) >> 6)); + c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); + if (prid & 0x3) + c->dcache.ways = 4; + else + c->dcache.ways = 2; + c->dcache.waybit = 0; + break; + default: if (!(config & MIPS_CONF_M)) panic("Don't know how to probe P-caches on this cpu."); @@ -963,6 +985,14 @@ static void __init probe_pcache(void) break; } +#ifdef CONFIG_CPU_LOONGSON2 + /* + * LOONGSON2 has 4 way icache, but when using indexed cache op, + * one op will act on all 4 ways + */ + c->icache.ways = 1; +#endif + printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n", icache_size >> 10, cpu_has_vtag_icache ? "virtually tagged" : "physically tagged", @@ -1036,6 +1066,24 @@ static int __init probe_scache(void) return 1; } +#if defined(CONFIG_CPU_LOONGSON2) +static void __init loongson2_sc_init(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + scache_size = 512*1024; + c->scache.linesz = 32; + c->scache.ways = 4; + c->scache.waybit = 0; + c->scache.waysize = scache_size / (c->scache.ways); + c->scache.sets = scache_size / (c->scache.linesz * c->scache.ways); + pr_info("Unified secondary cache %ldkB %s, linesize %d bytes.\n", + scache_size >> 10, way_string[c->scache.ways], c->scache.linesz); + + c->options |= MIPS_CPU_INCLUSIVE_CACHES; +} +#endif + extern int r5k_sc_init(void); extern int rm7k_sc_init(void); extern int mips_sc_init(void); @@ -1085,6 +1133,12 @@ static void __init setup_scache(void) #endif return; +#if defined(CONFIG_CPU_LOONGSON2) + case CPU_LOONGSON2: + loongson2_sc_init(); + return; +#endif + default: if (c->isa_level == MIPS_CPU_ISA_M32R1 || c->isa_level == MIPS_CPU_ISA_M32R2 || diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 9ea460b16bd..6f9bd7fbd48 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -476,7 +476,7 @@ static __init void probe_cache_sizes(void) * memory management function pointers, as well as initialize * the caches and tlbs */ -void sb1_cache_init(void) +void __init sb1_cache_init(void) { extern char except_vec2_sb1; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index abf99b1eba1..81f925a9a73 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -6,6 +6,8 @@ * Copyright (C) 1994 - 2003, 07 by Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 2007 MIPS Technologies, Inc. */ +#include <linux/fs.h> +#include <linux/fcntl.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> @@ -164,3 +166,11 @@ void __init cpu_cache_init(void) panic(cache_panic); } + +int __weak __uncached_access(struct file *file, unsigned long addr) +{ + if (file->f_flags & O_SYNC) + return 1; + + return addr >= __pa(high_memory); +} diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 65160d4984d..dcd6913dc1f 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -48,6 +48,22 @@ extern void build_tlb_refill_handler(void); #endif /* CONFIG_MIPS_MT_SMTC */ +#if defined(CONFIG_CPU_LOONGSON2) +/* + * LOONGSON2 has a 4 entry itlb which is a subset of dtlb, + * unfortrunately, itlb is not totally transparent to software. + */ +#define FLUSH_ITLB write_c0_diag(4); + +#define FLUSH_ITLB_VM(vma) { if ((vma)->vm_flags & VM_EXEC) write_c0_diag(4); } + +#else + +#define FLUSH_ITLB +#define FLUSH_ITLB_VM(vma) + +#endif + void local_flush_tlb_all(void) { unsigned long flags; @@ -73,6 +89,7 @@ void local_flush_tlb_all(void) } tlbw_use_hazard(); write_c0_entryhi(old_ctx); + FLUSH_ITLB; EXIT_CRITICAL(flags); } @@ -136,6 +153,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } else { drop_mmu_context(mm, cpu); } + FLUSH_ITLB; EXIT_CRITICAL(flags); } } @@ -178,6 +196,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) } else { local_flush_tlb_all(); } + FLUSH_ITLB; EXIT_CRITICAL(flags); } @@ -210,6 +229,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) finish: write_c0_entryhi(oldpid); + FLUSH_ITLB_VM(vma); EXIT_CRITICAL(flags); } } @@ -241,7 +261,7 @@ void local_flush_tlb_one(unsigned long page) tlbw_use_hazard(); } write_c0_entryhi(oldpid); - + FLUSH_ITLB; EXIT_CRITICAL(flags); } @@ -293,6 +313,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) else tlb_write_indexed(); tlbw_use_hazard(); + FLUSH_ITLB_VM(vma); EXIT_CRITICAL(flags); } diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index e7149290d1c..4ec0964b839 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -893,6 +893,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case CPU_4KSC: case CPU_20KC: case CPU_25KF: + case CPU_LOONGSON2: tlbw(p); break; @@ -1276,7 +1277,8 @@ static void __init build_r4000_tlb_refill_handler(void) * need three, with the second nop'ed and the third being * unused. */ -#ifdef CONFIG_32BIT + /* Loongson2 ebase is different than r4k, we have more space */ +#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2) if ((p - tlb_handler) > 64) panic("TLB refill handler space exceeded"); #else @@ -1289,7 +1291,7 @@ static void __init build_r4000_tlb_refill_handler(void) /* * Now fold the handler in the TLB refill handler space. */ -#ifdef CONFIG_32BIT +#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2) f = final_handler; /* Simplest case, just copy the handler. */ copy_handler(relocs, labels, tlb_handler, p, f); @@ -1336,7 +1338,7 @@ static void __init build_r4000_tlb_refill_handler(void) final_len); f = final_handler; -#ifdef CONFIG_64BIT +#if defined(CONFIG_64BIT) && !defined(CONFIG_CPU_LOONGSON2) if (final_len > 32) final_len = 64; else diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile deleted file mode 100644 index d5a090a85a1..00000000000 --- a/arch/mips/momentum/ocelot_3/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Momentum Computer's Ocelot-3 board. -# -# Note! Dependencies are done automagically by 'make dep', which also -# removes any old dependencies. DON'T put your own dependencies here -# unless it's something special (ie not a .c file). -# -obj-y += irq.o platform.o prom.o reset.o setup.o diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c deleted file mode 100644 index 3862d1d1add..00000000000 --- a/arch/mips/momentum/ocelot_3/irq.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) - * - * Copyright 2004 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <asm/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/system.h> - -static struct irqaction cascade_mv64340 = { - no_action, IRQF_DISABLED, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL -}; - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM | ST0_BEV); - - rm7k_cpu_irq_init(); - - /* set up the cascading interrupts */ - setup_irq(8, &cascade_mv64340); /* unmask intControl IM8, IRQ 9 */ - mv64340_irq_init(16); - - set_c0_status(ST0_IM); /* IE in the status register */ - -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP0) - do_IRQ(0); - else if (pending & STATUSF_IP1) - do_IRQ(1); - else if (pending & STATUSF_IP2) - do_IRQ(2); - else if (pending & STATUSF_IP3) - do_IRQ(3); - else if (pending & STATUSF_IP4) - do_IRQ(4); - else if (pending & STATUSF_IP5) - do_IRQ(5); - else if (pending & STATUSF_IP6) - do_IRQ(6); - else if (pending & STATUSF_IP7) - do_IRQ(7); - else { - /* - * Now look at the extended interrupts - */ - pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; - - if (pending & STATUSF_IP8) - ll_mv64340_irq(); - else - spurious_interrupt(); - } -} diff --git a/arch/mips/momentum/ocelot_3/platform.c b/arch/mips/momentum/ocelot_3/platform.c deleted file mode 100644 index 44e4c3fc740..00000000000 --- a/arch/mips/momentum/ocelot_3/platform.c +++ /dev/null @@ -1,208 +0,0 @@ -#include <linux/delay.h> -#include <linux/if_ether.h> -#include <linux/ioport.h> -#include <linux/mv643xx.h> -#include <linux/platform_device.h> - -#include "ocelot_3_fpga.h" - -#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) - -static struct resource mv643xx_eth_shared_resources[] = { - [0] = { - .name = "ethernet shared base", - .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, - .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + - MV643XX_ETH_SHARED_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv643xx_eth_shared_device = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), - .resource = mv643xx_eth_shared_resources, -}; - -#define MV_SRAM_BASE 0xfe000000UL -#define MV_SRAM_SIZE (256 * 1024) - -#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4) -#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4) - -#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE -#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2)) - -#define MV64x60_IRQ_ETH_0 48 -#define MV64x60_IRQ_ETH_1 49 -#define MV64x60_IRQ_ETH_2 50 - -static struct resource mv64x60_eth0_resources[] = { - [0] = { - .name = "eth0 irq", - .start = MV64x60_IRQ_ETH_0, - .end = MV64x60_IRQ_ETH_0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth0_pd = { - .port_number = 0, - - .tx_sram_addr = MV_SRAM_BASE_ETH0, - .tx_sram_size = MV_SRAM_TXRING_SIZE, - .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, - - .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE, - .rx_sram_size = MV_SRAM_RXRING_SIZE, - .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, -}; - -static struct platform_device eth0_device = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv64x60_eth0_resources), - .resource = mv64x60_eth0_resources, - .dev = { - .platform_data = ð0_pd, - }, -}; - -static struct resource mv64x60_eth1_resources[] = { - [0] = { - .name = "eth1 irq", - .start = MV64x60_IRQ_ETH_1, - .end = MV64x60_IRQ_ETH_1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth1_pd = { - .port_number = 1, - - .tx_sram_addr = MV_SRAM_BASE_ETH1, - .tx_sram_size = MV_SRAM_TXRING_SIZE, - .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, - - .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE, - .rx_sram_size = MV_SRAM_RXRING_SIZE, - .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, -}; - -static struct platform_device eth1_device = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(mv64x60_eth1_resources), - .resource = mv64x60_eth1_resources, - .dev = { - .platform_data = ð1_pd, - }, -}; - -static struct resource mv64x60_eth2_resources[] = { - [0] = { - .name = "eth2 irq", - .start = MV64x60_IRQ_ETH_2, - .end = MV64x60_IRQ_ETH_2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth2_pd = { - .port_number = 2, -}; - -static struct platform_device eth2_device = { - .name = MV643XX_ETH_NAME, - .id = 2, - .num_resources = ARRAY_SIZE(mv64x60_eth2_resources), - .resource = mv64x60_eth2_resources, - .dev = { - .platform_data = ð2_pd, - }, -}; - -static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { - &mv643xx_eth_shared_device, - ð0_device, - ð1_device, - ð2_device, -}; - -static u8 __init exchange_bit(u8 val, u8 cs) -{ - /* place the data */ - OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); - udelay(1); - - /* turn the clock on */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); - udelay(1); - - /* turn the clock off and read-strobe */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - - /* return the data */ - return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1; -} - -static void __init get_mac(char dest[6]) -{ - u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - int i,j; - - for (i = 0; i < 12; i++) - exchange_bit(read_opcode[i], 1); - - for (j = 0; j < 6; j++) { - dest[j] = 0; - for (i = 0; i < 8; i++) { - dest[j] <<= 1; - dest[j] |= exchange_bit(0, 1); - } - } - - /* turn off CS */ - exchange_bit(0,0); -} - -/* - * Copy and increment ethernet MAC address by a small value. - * - * This is useful for systems where the only one MAC address is stored in - * non-volatile memory for multiple ports. - */ -static inline void eth_mac_add(unsigned char *dst, unsigned char *src, - unsigned int add) -{ - int i; - - BUG_ON(add >= 256); - - for (i = ETH_ALEN; i >= 0; i--) { - dst[i] = src[i] + add; - add = dst[i] < src[i]; /* compute carry */ - } - - WARN_ON(add); -} - -static int __init mv643xx_eth_add_pds(void) -{ - unsigned char mac[ETH_ALEN]; - int ret; - - get_mac(mac); - eth_mac_add(eth0_pd.mac_addr, mac, 0); - eth_mac_add(eth1_pd.mac_addr, mac, 1); - eth_mac_add(eth2_pd.mac_addr, mac, 2); - ret = platform_add_devices(mv643xx_eth_pd_devs, - ARRAY_SIZE(mv643xx_eth_pd_devs)); - - return ret; -} - -device_initcall(mv643xx_eth_add_pds); - -#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */ diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c deleted file mode 100644 index 8e02df63578..00000000000 --- a/arch/mips/momentum/ocelot_3/prom.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - * - * Copyright 2004 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - */ -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/mv643xx.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm/pmon.h> -#include "ocelot_3_fpga.h" - -struct callvectors* debug_vectors; -extern unsigned long marvell_base; -extern unsigned long cpu_clock; - -const char *get_system_type(void) -{ - return "Momentum Ocelot-3"; -} - -#ifdef CONFIG_64BIT - -unsigned long signext(unsigned long addr) -{ - addr &= 0xffffffff; - return (unsigned long)((int)addr); -} - -void *get_arg(unsigned long args, int arc) -{ - unsigned long ul; - unsigned char *puc, uc; - - args += (arc * 4); - ul = (unsigned long)signext(args); - puc = (unsigned char *)ul; - if (puc == 0) - return (void *)0; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - uc = *puc++; - ul = (unsigned long)uc; - uc = *puc++; - ul |= (((unsigned long)uc) << 8); - uc = *puc++; - ul |= (((unsigned long)uc) << 16); - uc = *puc++; - ul |= (((unsigned long)uc) << 24); -#else /* CONFIG_CPU_LITTLE_ENDIAN */ - uc = *puc++; - ul = ((unsigned long)uc) << 24; - uc = *puc++; - ul |= (((unsigned long)uc) << 16); - uc = *puc++; - ul |= (((unsigned long)uc) << 8); - uc = *puc++; - ul |= ((unsigned long)uc); -#endif /* CONFIG_CPU_LITTLE_ENDIAN */ - ul = signext(ul); - return (void *)ul; -} - -char *arg64(unsigned long addrin, int arg_index) -{ - unsigned long args; - char *p; - - args = signext(addrin); - p = (char *)get_arg(args, arg_index); - - return p; -} -#endif /* CONFIG_64BIT */ - -void __init prom_init(void) -{ - int argc = fw_arg0; - char **arg = (char **) fw_arg1; - char **env = (char **) fw_arg2; - struct callvectors *cv = (struct callvectors *) fw_arg3; - int i; - -#ifdef CONFIG_64BIT - char *ptr; - printk("prom_init - MIPS64\n"); - - /* save the PROM vectors for debugging use */ - debug_vectors = (struct callvectors *)signext((unsigned long)cv); - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - - for (i = 1; i < argc; i++) { - ptr = (char *)arg64((unsigned long)arg, i); - if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >= - sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, ptr); - strcat(arcs_cmdline, " "); - } - i = 0; - - while (1) { - ptr = (char *)arg64((unsigned long)env, i); - if (! ptr) - break; - - if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) { - marvell_base = simple_strtol(ptr + strlen("gtbase="), - NULL, 16); - - if ((marvell_base & 0xffffffff00000000) == 0) - marvell_base |= 0xffffffff00000000; - - printk("marvell_base set to 0x%016lx\n", marvell_base); - } - if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) { - cpu_clock = simple_strtol(ptr + strlen("cpuclock="), - NULL, 10); - printk("cpu_clock set to %d\n", cpu_clock); - } - i++; - } - printk("arcs_cmdline: %s\n", arcs_cmdline); - -#else /* CONFIG_64BIT */ - - /* save the PROM vectors for debugging use */ - debug_vectors = cv; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, arg[i]); - strcat(arcs_cmdline, " "); - } - - while (*env) { - if (strncmp("gtbase", *env, strlen("gtbase")) == 0) { - marvell_base = simple_strtol(*env + strlen("gtbase="), - NULL, 16); - } - if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) { - cpu_clock = simple_strtol(*env + strlen("cpuclock="), - NULL, 10); - } - env++; - } -#endif /* CONFIG_64BIT */ - - mips_machgroup = MACH_GROUP_MOMENCO; - mips_machtype = MACH_MOMENCO_OCELOT_3; - -#ifndef CONFIG_64BIT - debug_vectors->printf("Booting Linux kernel...\n"); -#endif -} - -void __init prom_free_prom_memory(void) -{ -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ -} diff --git a/arch/mips/momentum/ocelot_3/reset.c b/arch/mips/momentum/ocelot_3/reset.c deleted file mode 100644 index 9d86d246837..00000000000 --- a/arch/mips/momentum/ocelot_3/reset.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 1997, 01, 05 Ralf Baechle - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright (C) 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - * - * Copyright 2004 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> - -void momenco_ocelot_restart(char *command) -{ - /* base address of timekeeper portion of part */ - void *nvram = (void *) 0xfc807000L; - - /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ - writeb(0x84, nvram + 0xff7); - - /* wait for the watchdog to go off */ - mdelay(100+(1000/16)); - - /* if the watchdog fails for some reason, let people know */ - printk(KERN_NOTICE "Watchdog reset failed\n"); -} - -void momenco_ocelot_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void momenco_ocelot_power_off(void) -{ - momenco_ocelot_halt(); -} diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c deleted file mode 100644 index ff0829f8111..00000000000 --- a/arch/mips/momentum/ocelot_3/setup.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * setup.c - * - * BRIEF MODULE DESCRIPTION - * Momentum Computer Ocelot-3 board dependent boot routines - * - * Copyright (C) 1996, 1997, 01, 05 - 06 Ralf Baechle - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2001 Red Hat, Inc. - * Copyright (C) 2002 Momentum Computer - * - * Author: Matthew Dharm, Momentum Computer - * mdharm@momenco.com - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - * - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2004 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mc146818rtc.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/timex.h> -#include <linux/bootmem.h> -#include <linux/mv643xx.h> -#include <linux/pm.h> -#include <linux/bcd.h> - -#include <asm/time.h> -#include <asm/page.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/pci.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/mc146818rtc.h> -#include <asm/tlbflush.h> -#include "ocelot_3_fpga.h" - -/* Marvell Discovery Register Base */ -unsigned long marvell_base = (signed)0xf4000000; - -/* CPU clock */ -unsigned long cpu_clock; - -/* RTC/NVRAM */ -unsigned char* rtc_base = (unsigned char*)(signed)0xfc800000; - -/* FPGA Base */ -unsigned long ocelot_fpga_base = (signed)0xfc000000; - -/* Serial base */ -unsigned long uart_base = (signed)0xfd000000; - -/* - * Marvell Discovery SRAM. This is one place where Ethernet - * Tx and Rx descriptors can be placed to improve performance - */ -extern unsigned long mv64340_sram_base; - -/* These functions are used for rebooting or halting the machine*/ -extern void momenco_ocelot_restart(char *command); -extern void momenco_ocelot_halt(void); -extern void momenco_ocelot_power_off(void); - -void momenco_time_init(void); -static char reset_reason; - -void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask); - -static inline unsigned long ENTRYLO(unsigned long paddr) -{ - return ((paddr & PAGE_MASK) | - (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | - _CACHE_UNCACHED)) >> 6; -} - -void __init bus_error_init(void) -{ - /* nothing */ -} - -/* - * setup code for a handoff from a version 2 PMON 2000 PROM - */ -void setup_wired_tlb_entries(void) -{ - write_c0_wired(0); - local_flush_tlb_all(); - - /* marvell and extra space */ - add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), (signed)0xf4000000, PM_64K); - - /* fpga, rtc, and uart */ - add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), (signed)0xfc000000, PM_16M); -} - -unsigned long m48t37y_get_time(void) -{ - unsigned int year, month, day, hour, min, sec; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - /* stop the update */ - rtc_base[0x7ff8] = 0x40; - - year = BCD2BIN(rtc_base[0x7fff]); - year += BCD2BIN(rtc_base[0x7ff1]) * 100; - - month = BCD2BIN(rtc_base[0x7ffe]); - - day = BCD2BIN(rtc_base[0x7ffd]); - - hour = BCD2BIN(rtc_base[0x7ffb]); - min = BCD2BIN(rtc_base[0x7ffa]); - sec = BCD2BIN(rtc_base[0x7ff9]); - - /* start the update */ - rtc_base[0x7ff8] = 0x00; - spin_unlock_irqrestore(&rtc_lock, flags); - - return mktime(year, month, day, hour, min, sec); -} - -int m48t37y_set_time(unsigned long sec) -{ - struct rtc_time tm; - unsigned long flags; - - /* convert to a more useful format -- note months count from 0 */ - to_tm(sec, &tm); - tm.tm_mon += 1; - - spin_lock_irqsave(&rtc_lock, flags); - /* enable writing */ - rtc_base[0x7ff8] = 0x80; - - /* year */ - rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100); - rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100); - - /* month */ - rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon); - - /* day */ - rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday); - - /* hour/min/sec */ - rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour); - rtc_base[0x7ffa] = BIN2BCD(tm.tm_min); - rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec); - - /* day of week -- not really used, but let's keep it up-to-date */ - rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1); - - /* disable writing */ - rtc_base[0x7ff8] = 0x00; - spin_unlock_irqrestore(&rtc_lock, flags); - - return 0; -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - setup_irq(7, irq); /* Timer interrupt, unmask status IM7 */ -} - -void momenco_time_init(void) -{ - setup_wired_tlb_entries(); - - /* - * Ocelot-3 board has been built with both - * the Rm7900 and the Rm7065C - */ - mips_hpt_frequency = cpu_clock / 2; - - rtc_mips_get_time = m48t37y_get_time; - rtc_mips_set_time = m48t37y_set_time; -} - -/* - * PCI Support for Ocelot-3 - */ - -/* Bus #0 IO and MEM space */ -#define OCELOT_3_PCI_IO_0_START 0xe0000000 -#define OCELOT_3_PCI_IO_0_SIZE 0x08000000 -#define OCELOT_3_PCI_MEM_0_START 0xc0000000 -#define OCELOT_3_PCI_MEM_0_SIZE 0x10000000 - -/* Bus #1 IO and MEM space */ -#define OCELOT_3_PCI_IO_1_START 0xe8000000 -#define OCELOT_3_PCI_IO_1_SIZE 0x08000000 -#define OCELOT_3_PCI_MEM_1_START 0xd0000000 -#define OCELOT_3_PCI_MEM_1_SIZE 0x10000000 - -static struct resource mv_pci_io_mem0_resource = { - .name = "MV64340 PCI0 IO MEM", - .start = OCELOT_3_PCI_IO_0_START, - .end = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource mv_pci_io_mem1_resource = { - .name = "MV64340 PCI1 IO MEM", - .start = OCELOT_3_PCI_IO_1_START, - .end = OCELOT_3_PCI_IO_1_START + OCELOT_3_PCI_IO_1_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource mv_pci_mem0_resource = { - .name = "MV64340 PCI0 MEM", - .start = OCELOT_3_PCI_MEM_0_START, - .end = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct resource mv_pci_mem1_resource = { - .name = "MV64340 PCI1 MEM", - .start = OCELOT_3_PCI_MEM_1_START, - .end = OCELOT_3_PCI_MEM_1_START + OCELOT_3_PCI_MEM_1_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct mv_pci_controller mv_bus0_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = &mv_pci_mem0_resource, - .io_resource = &mv_pci_io_mem0_resource, - }, - .config_addr = MV64340_PCI_0_CONFIG_ADDR, - .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, -}; - -static struct mv_pci_controller mv_bus1_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = &mv_pci_mem1_resource, - .io_resource = &mv_pci_io_mem1_resource, - }, - .config_addr = MV64340_PCI_1_CONFIG_ADDR, - .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, -}; - -static __init int __init ja_pci_init(void) -{ - uint32_t enable; - extern int pci_probe_only; - - /* PMON will assign PCI resources */ - pci_probe_only = 1; - - enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE); - /* - * We require at least one enabled I/O or PCI memory window or we - * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3. - */ - if (enable & (0x01 << 9) || enable & (0x01 << 10)) - register_pci_controller(&mv_bus0_controller.pcic); - - if (enable & (0x01 << 14) || enable & (0x01 << 15)) - register_pci_controller(&mv_bus1_controller.pcic); - - ioport_resource.end = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE + - OCELOT_3_PCI_IO_1_SIZE - 1; - - iomem_resource.end = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE + - OCELOT_3_PCI_MEM_1_SIZE - 1; - - set_io_port_base(OCELOT_3_PCI_IO_0_START); /* mips_io_port_base */ - - return 0; -} - -arch_initcall(ja_pci_init); - -void __init plat_mem_setup(void) -{ - unsigned int tmpword; - - board_time_init = momenco_time_init; - - _machine_restart = momenco_ocelot_restart; - _machine_halt = momenco_ocelot_halt; - pm_power_off = momenco_ocelot_power_off; - - /* Wired TLB entries */ - setup_wired_tlb_entries(); - - /* shut down ethernet ports, just to be sure our memory doesn't get - * corrupted by random ethernet traffic. - */ - MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); - do {} - while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); - do {} - while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); - do {} - while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); - do {} - while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); - MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), - MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); - MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), - MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); - - /* Turn off the Bit-Error LED */ - OCELOT_FPGA_WRITE(0x80, CLR); - - tmpword = OCELOT_FPGA_READ(BOARDREV); - if (tmpword < 26) - printk("Momenco Ocelot-3: Board Assembly Rev. %c\n", - 'A'+tmpword); - else - printk("Momenco Ocelot-3: Board Assembly Revision #0x%x\n", - tmpword); - - tmpword = OCELOT_FPGA_READ(FPGA_REV); - printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = OCELOT_FPGA_READ(RESET_STATUS); - printk("Reset reason: 0x%x\n", tmpword); - switch (tmpword) { - case 0x1: - printk(" - Power-up reset\n"); - break; - case 0x2: - printk(" - Push-button reset\n"); - break; - case 0x4: - printk(" - cPCI bus reset\n"); - break; - case 0x8: - printk(" - Watchdog reset\n"); - break; - case 0x10: - printk(" - Software reset\n"); - break; - default: - printk(" - Unknown reset cause\n"); - } - reset_reason = tmpword; - OCELOT_FPGA_WRITE(0xff, RESET_STATUS); - - tmpword = OCELOT_FPGA_READ(CPCI_ID); - printk("cPCI ID register: 0x%02x\n", tmpword); - printk(" - Slot number: %d\n", tmpword & 0x1f); - printk(" - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no"); - printk(" - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no"); - - tmpword = OCELOT_FPGA_READ(BOARD_STATUS); - printk("Board Status register: 0x%02x\n", tmpword); - printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); - printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); - printk(" - L3 cache size: %d MB\n", (1<<((tmpword&12) >> 2))&~1); - - /* Support for 128 MB memory */ - add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM); -} diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile deleted file mode 100644 index d69161aa167..00000000000 --- a/arch/mips/momentum/ocelot_c/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Momentum Computer's Ocelot-C and -CS boards. -# - -obj-y += cpci-irq.o irq.o platform.o prom.o reset.o \ - setup.o uart-irq.o - -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c deleted file mode 100644 index 186a140fd2a..00000000000 --- a/arch/mips/momentum/ocelot_c/cpci-irq.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright 2002 Momentum Computer - * Author: mdharm@momenco.com - * - * arch/mips/momentum/ocelot_c/cpci-irq.c - * Interrupt routines for cpci. Interrupt numbers are assigned from - * CPCI_IRQ_BASE to CPCI_IRQ_BASE+8 (8 interrupt sources). - * - * Note that the high-level software will need to be careful about using - * these interrupts. If this board is asserting a cPCI interrupt, it will - * also see the asserted interrupt. Care must be taken to avoid an - * interrupt flood. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <asm/io.h> -#include "ocelot_c_fpga.h" - -#define CPCI_IRQ_BASE 8 - -static inline int ls1bit8(unsigned int x) -{ - int b = 7, s; - - s = 4; if (((unsigned char)(x << 4)) == 0) s = 0; b -= s; x <<= s; - s = 2; if (((unsigned char)(x << 2)) == 0) s = 0; b -= s; x <<= s; - s = 1; if (((unsigned char)(x << 1)) == 0) s = 0; b -= s; - - return b; -} - -/* mask off an interrupt -- 0 is enable, 1 is disable */ -static inline void mask_cpci_irq(unsigned int irq) -{ - uint32_t value; - - value = OCELOT_FPGA_READ(INTMASK); - value |= 1 << (irq - CPCI_IRQ_BASE); - OCELOT_FPGA_WRITE(value, INTMASK); - - /* read the value back to assure that it's really been written */ - value = OCELOT_FPGA_READ(INTMASK); -} - -/* unmask an interrupt -- 0 is enable, 1 is disable */ -static inline void unmask_cpci_irq(unsigned int irq) -{ - uint32_t value; - - value = OCELOT_FPGA_READ(INTMASK); - value &= ~(1 << (irq - CPCI_IRQ_BASE)); - OCELOT_FPGA_WRITE(value, INTMASK); - - /* read the value back to assure that it's really been written */ - value = OCELOT_FPGA_READ(INTMASK); -} - -/* - * Interrupt handler for interrupts coming from the FPGA chip. - * It could be built in ethernet ports etc... - */ -void ll_cpci_irq(void) -{ - unsigned int irq_src, irq_mask; - - /* read the interrupt status registers */ - irq_src = OCELOT_FPGA_READ(INTSTAT); - irq_mask = OCELOT_FPGA_READ(INTMASK); - - /* mask for just the interrupts we want */ - irq_src &= ~irq_mask; - - do_IRQ(ls1bit8(irq_src) + CPCI_IRQ_BASE); -} - -struct irq_chip cpci_irq_type = { - .name = "CPCI/FPGA", - .ack = mask_cpci_irq, - .mask = mask_cpci_irq, - .mask_ack = mask_cpci_irq, - .unmask = unmask_cpci_irq, -}; - -void cpci_irq_init(void) -{ - int i; - - for (i = CPCI_IRQ_BASE; i < (CPCI_IRQ_BASE + 8); i++) - set_irq_chip_and_handler(i, &cpci_irq_type, handle_level_irq); -} diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c deleted file mode 100644 index 32d6fb4ee67..00000000000 --- a/arch/mips/momentum/ocelot_c/dbg_io.c +++ /dev/null @@ -1,121 +0,0 @@ - -#include <asm/serial.h> /* For the serial port location and base baud */ - -/* --- CONFIG --- */ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -/* --- END OF CONFIG --- */ - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* ----------------------------------------------------- */ - -/* === CONFIG === */ - -/* [jsun] we use the second serial port for kdb */ -#define BASE OCELOT_SERIAL1_BASE -#define MAX_BAUD OCELOT_BASE_BAUD - -/* === END OF CONFIG === */ - -#define REG_OFFSET 4 - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint8*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z) - -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up baud rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -uint8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_38400, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -int putDebugChar(uint8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_38400, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c deleted file mode 100644 index 844d566c9de..00000000000 --- a/arch/mips/momentum/ocelot_c/irq.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/bitops.h> -#include <linux/mv643xx.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/system.h> - -extern void uart_irq_init(void); -extern void cpci_irq_init(void); - -static struct irqaction cascade_fpga = { - no_action, IRQF_DISABLED, CPU_MASK_NONE, "cascade via FPGA", NULL, NULL -}; - -static struct irqaction cascade_mv64340 = { - no_action, IRQF_DISABLED, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL -}; - -extern void ll_uart_irq(void); -extern void ll_cpci_irq(void); - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - - if (pending & STATUSF_IP0) - do_IRQ(0); - else if (pending & STATUSF_IP1) - do_IRQ(1); - else if (pending & STATUSF_IP2) - do_IRQ(2); - else if (pending & STATUSF_IP3) - ll_uart_irq(); - else if (pending & STATUSF_IP4) - do_IRQ(4); - else if (pending & STATUSF_IP5) - ll_cpci_irq(); - else if (pending & STATUSF_IP6) - ll_mv64340_irq(); - else if (pending & STATUSF_IP7) - do_IRQ(7); - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM); - - mips_cpu_irq_init(); - - /* set up the cascading interrupts */ - setup_irq(3, &cascade_fpga); - setup_irq(5, &cascade_fpga); - setup_irq(6, &cascade_mv64340); - - mv64340_irq_init(16); - uart_irq_init(); - cpci_irq_init(); -} diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c deleted file mode 100644 index 7780aa0c655..00000000000 --- a/arch/mips/momentum/ocelot_c/platform.c +++ /dev/null @@ -1,183 +0,0 @@ -#include <linux/delay.h> -#include <linux/if_ether.h> -#include <linux/ioport.h> -#include <linux/mv643xx.h> -#include <linux/platform_device.h> - -#include "ocelot_c_fpga.h" - -#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) - -static struct resource mv643xx_eth_shared_resources[] = { - [0] = { - .name = "ethernet shared base", - .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, - .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + - MV643XX_ETH_SHARED_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv643xx_eth_shared_device = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), - .resource = mv643xx_eth_shared_resources, -}; - -#define MV_SRAM_BASE 0xfe000000UL -#define MV_SRAM_SIZE (256 * 1024) - -#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4) -#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4) - -#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE -#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2)) - -#define MV64x60_IRQ_ETH_0 48 -#define MV64x60_IRQ_ETH_1 49 - -static struct resource mv64x60_eth0_resources[] = { - [0] = { - .name = "eth0 irq", - .start = MV64x60_IRQ_ETH_0, - .end = MV64x60_IRQ_ETH_0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth0_pd = { - .port_number = 0, - - .tx_sram_addr = MV_SRAM_BASE_ETH0, - .tx_sram_size = MV_SRAM_TXRING_SIZE, - .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, - - .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE, - .rx_sram_size = MV_SRAM_RXRING_SIZE, - .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, -}; - -static struct platform_device eth0_device = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv64x60_eth0_resources), - .resource = mv64x60_eth0_resources, - .dev = { - .platform_data = ð0_pd, - }, -}; - -static struct resource mv64x60_eth1_resources[] = { - [0] = { - .name = "eth1 irq", - .start = MV64x60_IRQ_ETH_1, - .end = MV64x60_IRQ_ETH_1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth1_pd = { - .port_number = 1, - - .tx_sram_addr = MV_SRAM_BASE_ETH1, - .tx_sram_size = MV_SRAM_TXRING_SIZE, - .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, - - .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE, - .rx_sram_size = MV_SRAM_RXRING_SIZE, - .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, -}; - -static struct platform_device eth1_device = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(mv64x60_eth1_resources), - .resource = mv64x60_eth1_resources, - .dev = { - .platform_data = ð1_pd, - }, -}; - -static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { - &mv643xx_eth_shared_device, - ð0_device, - ð1_device, - /* The third port is not wired up on the Ocelot C */ -}; - -static u8 __init exchange_bit(u8 val, u8 cs) -{ - /* place the data */ - OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); - udelay(1); - - /* turn the clock on */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); - udelay(1); - - /* turn the clock off and read-strobe */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - - /* return the data */ - return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1; -} - -static void __init get_mac(char dest[6]) -{ - u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - int i,j; - - for (i = 0; i < 12; i++) - exchange_bit(read_opcode[i], 1); - - for (j = 0; j < 6; j++) { - dest[j] = 0; - for (i = 0; i < 8; i++) { - dest[j] <<= 1; - dest[j] |= exchange_bit(0, 1); - } - } - - /* turn off CS */ - exchange_bit(0,0); -} - -/* - * Copy and increment ethernet MAC address by a small value. - * - * This is useful for systems where the only one MAC address is stored in - * non-volatile memory for multiple ports. - */ -static inline void eth_mac_add(unsigned char *dst, unsigned char *src, - unsigned int add) -{ - int i; - - BUG_ON(add >= 256); - - for (i = ETH_ALEN; i >= 0; i--) { - dst[i] = src[i] + add; - add = dst[i] < src[i]; /* compute carry */ - } - - WARN_ON(add); -} - -static int __init mv643xx_eth_add_pds(void) -{ - unsigned char mac[ETH_ALEN]; - int ret; - - get_mac(mac); - eth_mac_add(eth0_pd.mac_addr, mac, 0); - eth_mac_add(eth1_pd.mac_addr, mac, 1); - ret = platform_add_devices(mv643xx_eth_pd_devs, - ARRAY_SIZE(mv643xx_eth_pd_devs)); - - return ret; -} - -device_initcall(mv643xx_eth_add_pds); - -#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */ diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c deleted file mode 100644 index b689ceea8cf..00000000000 --- a/arch/mips/momentum/ocelot_c/prom.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - * - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <linux/mv643xx.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm/pmon.h> - -#include "ocelot_c_fpga.h" - -struct callvectors* debug_vectors; - -extern unsigned long marvell_base; -extern unsigned int cpu_clock; - -const char *get_system_type(void) -{ -#ifdef CONFIG_CPU_SR71000 - return "Momentum Ocelot-CS"; -#else - return "Momentum Ocelot-C"; -#endif -} - -#ifdef CONFIG_64BIT - -unsigned long signext(unsigned long addr) -{ - addr &= 0xffffffff; - return (unsigned long)((int)addr); -} - -void *get_arg(unsigned long args, int arc) -{ - unsigned long ul; - unsigned char *puc, uc; - - args += (arc * 4); - ul = (unsigned long)signext(args); - puc = (unsigned char *)ul; - if (puc == 0) - return (void *)0; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - uc = *puc++; - ul = (unsigned long)uc; - uc = *puc++; - ul |= (((unsigned long)uc) << 8); - uc = *puc++; - ul |= (((unsigned long)uc) << 16); - uc = *puc++; - ul |= (((unsigned long)uc) << 24); -#else /* CONFIG_CPU_LITTLE_ENDIAN */ - uc = *puc++; - ul = ((unsigned long)uc) << 24; - uc = *puc++; - ul |= (((unsigned long)uc) << 16); - uc = *puc++; - ul |= (((unsigned long)uc) << 8); - uc = *puc++; - ul |= ((unsigned long)uc); -#endif /* CONFIG_CPU_LITTLE_ENDIAN */ - ul = signext(ul); - return (void *)ul; -} - -char *arg64(unsigned long addrin, int arg_index) -{ - unsigned long args; - char *p; - args = signext(addrin); - p = (char *)get_arg(args, arg_index); - return p; -} -#endif /* CONFIG_64BIT */ - - -void __init prom_init(void) -{ - int argc = fw_arg0; - char **arg = (char **) fw_arg1; - char **env = (char **) fw_arg2; - struct callvectors *cv = (struct callvectors *) fw_arg3; - int i; - -#ifdef CONFIG_64BIT - char *ptr; - - printk("prom_init - MIPS64\n"); - /* save the PROM vectors for debugging use */ - debug_vectors = (struct callvectors *)signext((unsigned long)cv); - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - - for (i = 1; i < argc; i++) { - ptr = (char *)arg64((unsigned long)arg, i); - if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >= - sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, ptr); - strcat(arcs_cmdline, " "); - } - i = 0; - while (1) { - ptr = (char *)arg64((unsigned long)env, i); - if (! ptr) - break; - - if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) { - marvell_base = simple_strtol(ptr + strlen("gtbase="), - NULL, 16); - - if ((marvell_base & 0xffffffff00000000) == 0) - marvell_base |= 0xffffffff00000000; - - printk("marvell_base set to 0x%016lx\n", marvell_base); - } - if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) { - cpu_clock = simple_strtol(ptr + strlen("cpuclock="), - NULL, 10); - printk("cpu_clock set to %d\n", cpu_clock); - } - i++; - } - printk("arcs_cmdline: %s\n", arcs_cmdline); - -#else /* CONFIG_64BIT */ - /* save the PROM vectors for debugging use */ - debug_vectors = cv; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, arg[i]); - strcat(arcs_cmdline, " "); - } - - while (*env) { - if (strncmp("gtbase", *env, strlen("gtbase")) == 0) { - marvell_base = simple_strtol(*env + strlen("gtbase="), - NULL, 16); - } - if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) { - cpu_clock = simple_strtol(*env + strlen("cpuclock="), - NULL, 10); - } - env++; - } -#endif /* CONFIG_64BIT */ - - mips_machgroup = MACH_GROUP_MOMENCO; - mips_machtype = MACH_MOMENCO_OCELOT_C; - -#ifndef CONFIG_64BIT - debug_vectors->printf("Booting Linux kernel...\n"); -#endif -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/momentum/ocelot_c/reset.c b/arch/mips/momentum/ocelot_c/reset.c deleted file mode 100644 index 3fdcb64ff1e..00000000000 --- a/arch/mips/momentum/ocelot_c/reset.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 1997, 2001 Ralf Baechle - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright (C) 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> -#include <linux/delay.h> - -void momenco_ocelot_restart(char *command) -{ - /* base address of timekeeper portion of part */ - void *nvram = (void *) -#ifdef CONFIG_64BIT - 0xfffffffffc807000; -#else - 0xfc807000; -#endif - - /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ - writeb(0x84, nvram + 0xff7); - - /* wait for the watchdog to go off */ - mdelay(100+(1000/16)); - - /* if the watchdog fails for some reason, let people know */ - printk(KERN_NOTICE "Watchdog reset failed\n"); -} - -void momenco_ocelot_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void momenco_ocelot_power_off(void) -{ - momenco_ocelot_halt(); -} diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c deleted file mode 100644 index 0b6b2338cfb..00000000000 --- a/arch/mips/momentum/ocelot_c/setup.c +++ /dev/null @@ -1,362 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Momentum Computer Ocelot-C and -CS board dependent boot routines - * - * Copyright (C) 1996, 1997, 2001 Ralf Baechle - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2001 Red Hat, Inc. - * Copyright (C) 2002 Momentum Computer - * - * Author: Matthew Dharm, Momentum Computer - * mdharm@momenco.com - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - * - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/bcd.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/pm.h> -#include <linux/timex.h> -#include <linux/vmalloc.h> -#include <linux/mv643xx.h> - -#include <asm/time.h> -#include <asm/bootinfo.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/pci.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/marvell.h> -#include <linux/bootmem.h> -#include <linux/blkdev.h> -#include "ocelot_c_fpga.h" - -unsigned long marvell_base; -unsigned int cpu_clock; - -/* These functions are used for rebooting or halting the machine*/ -extern void momenco_ocelot_restart(char *command); -extern void momenco_ocelot_halt(void); -extern void momenco_ocelot_power_off(void); - -void momenco_time_init(void); - -static char reset_reason; - -void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask); - -static unsigned long ENTRYLO(unsigned long paddr) -{ - return ((paddr & PAGE_MASK) | - (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | - _CACHE_UNCACHED)) >> 6; -} - -/* setup code for a handoff from a version 2 PMON 2000 PROM */ -void PMON_v2_setup(void) -{ - /* Some wired TLB entries for the MV64340 and perhiperals. The - MV64340 is going to be hit on every IRQ anyway - there's - absolutely no point in letting it be a random TLB entry, as - it'll just cause needless churning of the TLB. And we use - the other half for the serial port, which is just a PITA - otherwise :) - - Device Physical Virtual - MV64340 Internal Regs 0xf4000000 0xf4000000 - Ocelot-C[S] PLD (CS0) 0xfc000000 0xfc000000 - NVRAM (CS1) 0xfc800000 0xfc800000 - UARTs (CS2) 0xfd000000 0xfd000000 - Internal SRAM 0xfe000000 0xfe000000 - M-Systems DOC (CS3) 0xff000000 0xff000000 - */ - printk("PMON_v2_setup\n"); - -#ifdef CONFIG_64BIT - /* marvell and extra space */ - add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xfffffffff4000000, PM_64K); - /* fpga, rtc, and uart */ - add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfffffffffc000000, PM_16M); - /* m-sys and internal SRAM */ - add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M); - - marvell_base = 0xfffffffff4000000; -#else - /* marvell and extra space */ - add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K); - /* fpga, rtc, and uart */ - add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfc000000, PM_16M); - /* m-sys and internal SRAM */ - add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M); - - marvell_base = 0xf4000000; -#endif -} - -unsigned long m48t37y_get_time(void) -{ -#ifdef CONFIG_64BIT - unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000; -#else - unsigned char* rtc_base = (unsigned char*)0xfc800000; -#endif - unsigned int year, month, day, hour, min, sec; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - /* stop the update */ - rtc_base[0x7ff8] = 0x40; - - year = BCD2BIN(rtc_base[0x7fff]); - year += BCD2BIN(rtc_base[0x7ff1]) * 100; - - month = BCD2BIN(rtc_base[0x7ffe]); - - day = BCD2BIN(rtc_base[0x7ffd]); - - hour = BCD2BIN(rtc_base[0x7ffb]); - min = BCD2BIN(rtc_base[0x7ffa]); - sec = BCD2BIN(rtc_base[0x7ff9]); - - /* start the update */ - rtc_base[0x7ff8] = 0x00; - spin_unlock_irqrestore(&rtc_lock, flags); - - return mktime(year, month, day, hour, min, sec); -} - -int m48t37y_set_time(unsigned long sec) -{ -#ifdef CONFIG_64BIT - unsigned char* rtc_base = (unsigned char*)0xfffffffffc800000; -#else - unsigned char* rtc_base = (unsigned char*)0xfc800000; -#endif - struct rtc_time tm; - unsigned long flags; - - /* convert to a more useful format -- note months count from 0 */ - to_tm(sec, &tm); - tm.tm_mon += 1; - - spin_lock_irqsave(&rtc_lock, flags); - /* enable writing */ - rtc_base[0x7ff8] = 0x80; - - /* year */ - rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100); - rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100); - - /* month */ - rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon); - - /* day */ - rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday); - - /* hour/min/sec */ - rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour); - rtc_base[0x7ffa] = BIN2BCD(tm.tm_min); - rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec); - - /* day of week -- not really used, but let's keep it up-to-date */ - rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1); - - /* disable writing */ - rtc_base[0x7ff8] = 0x00; - spin_unlock_irqrestore(&rtc_lock, flags); - - return 0; -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - setup_irq(7, irq); -} - -void momenco_time_init(void) -{ -#ifdef CONFIG_CPU_SR71000 - mips_hpt_frequency = cpu_clock; -#elif defined(CONFIG_CPU_RM7000) - mips_hpt_frequency = cpu_clock / 2; -#else -#error Unknown CPU for this board -#endif - printk("momenco_time_init cpu_clock=%d\n", cpu_clock); - - rtc_mips_get_time = m48t37y_get_time; - rtc_mips_set_time = m48t37y_set_time; -} - -void __init plat_mem_setup(void) -{ - unsigned int tmpword; - - board_time_init = momenco_time_init; - - _machine_restart = momenco_ocelot_restart; - _machine_halt = momenco_ocelot_halt; - pm_power_off = momenco_ocelot_power_off; - - /* - * initrd_start = (unsigned long)ocelot_initrd_start; - * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size; - * initrd_below_start_ok = 1; - */ - - /* do handoff reconfiguration */ - PMON_v2_setup(); - - /* shut down ethernet ports, just to be sure our memory doesn't get - * corrupted by random ethernet traffic. - */ - MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); - do {} - while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); - do {} - while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); - do {} - while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); - do {} - while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); - MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), - MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); - MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), - MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); - - /* Turn off the Bit-Error LED */ - OCELOT_FPGA_WRITE(0x80, CLR); - - tmpword = OCELOT_FPGA_READ(BOARDREV); -#ifdef CONFIG_CPU_SR71000 - if (tmpword < 26) - printk("Momenco Ocelot-CS: Board Assembly Rev. %c\n", - 'A'+tmpword); - else - printk("Momenco Ocelot-CS: Board Assembly Revision #0x%x\n", - tmpword); -#else - if (tmpword < 26) - printk("Momenco Ocelot-C: Board Assembly Rev. %c\n", - 'A'+tmpword); - else - printk("Momenco Ocelot-C: Board Assembly Revision #0x%x\n", - tmpword); -#endif - - tmpword = OCELOT_FPGA_READ(FPGA_REV); - printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = OCELOT_FPGA_READ(RESET_STATUS); - printk("Reset reason: 0x%x\n", tmpword); - switch (tmpword) { - case 0x1: - printk(" - Power-up reset\n"); - break; - case 0x2: - printk(" - Push-button reset\n"); - break; - case 0x4: - printk(" - cPCI bus reset\n"); - break; - case 0x8: - printk(" - Watchdog reset\n"); - break; - case 0x10: - printk(" - Software reset\n"); - break; - default: - printk(" - Unknown reset cause\n"); - } - reset_reason = tmpword; - OCELOT_FPGA_WRITE(0xff, RESET_STATUS); - - tmpword = OCELOT_FPGA_READ(CPCI_ID); - printk("cPCI ID register: 0x%02x\n", tmpword); - printk(" - Slot number: %d\n", tmpword & 0x1f); - printk(" - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no"); - printk(" - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no"); - - tmpword = OCELOT_FPGA_READ(BOARD_STATUS); - printk("Board Status register: 0x%02x\n", tmpword); - printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); - printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); - printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1); - printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3))); - - switch(tmpword &3) { - case 3: - /* 512MiB */ - add_memory_region(0x0, 0x200<<20, BOOT_MEM_RAM); - break; - case 2: - /* 256MiB */ - add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM); - break; - case 1: - /* 128MiB */ - add_memory_region(0x0, 0x80<<20, BOOT_MEM_RAM); - break; - case 0: - /* 1GiB -- needs CONFIG_HIGHMEM */ - add_memory_region(0x0, 0x400<<20, BOOT_MEM_RAM); - break; - } -} - -/* - * This needs to be one of the first initcalls, because no I/O port access - * can work before this - */ -static int io_base_ioremap(void) -{ - void __iomem * io_remap_range = ioremap(0xc0000000UL, 0x10000); - - if (!io_remap_range) - panic("Could not ioremap I/O port range"); - - set_io_port_base((unsigned long) io_remap_range); - - return 0; -} - -module_init(io_base_ioremap); diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c deleted file mode 100644 index de1a31ee52f..00000000000 --- a/arch/mips/momentum/ocelot_c/uart-irq.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright 2002 Momentum Computer - * Author: mdharm@momenco.com - * - * arch/mips/momentum/ocelot_c/uart-irq.c - * Interrupt routines for UARTs. Interrupt numbers are assigned from - * 80 to 81 (2 interrupt sources). - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <asm/io.h> -#include <asm/irq.h> -#include "ocelot_c_fpga.h" - -static inline int ls1bit8(unsigned int x) -{ - int b = 7, s; - - s = 4; if (((unsigned char)(x << 4)) == 0) s = 0; b -= s; x <<= s; - s = 2; if (((unsigned char)(x << 2)) == 0) s = 0; b -= s; x <<= s; - s = 1; if (((unsigned char)(x << 1)) == 0) s = 0; b -= s; - - return b; -} - -/* mask off an interrupt -- 0 is enable, 1 is disable */ -static inline void mask_uart_irq(unsigned int irq) -{ - uint8_t value; - - value = OCELOT_FPGA_READ(UART_INTMASK); - value |= 1 << (irq - 74); - OCELOT_FPGA_WRITE(value, UART_INTMASK); - - /* read the value back to assure that it's really been written */ - value = OCELOT_FPGA_READ(UART_INTMASK); -} - -/* unmask an interrupt -- 0 is enable, 1 is disable */ -static inline void unmask_uart_irq(unsigned int irq) -{ - uint8_t value; - - value = OCELOT_FPGA_READ(UART_INTMASK); - value &= ~(1 << (irq - 74)); - OCELOT_FPGA_WRITE(value, UART_INTMASK); - - /* read the value back to assure that it's really been written */ - value = OCELOT_FPGA_READ(UART_INTMASK); -} - -/* - * Interrupt handler for interrupts coming from the FPGA chip. - */ -void ll_uart_irq(void) -{ - unsigned int irq_src, irq_mask; - - /* read the interrupt status registers */ - irq_src = OCELOT_FPGA_READ(UART_INTSTAT); - irq_mask = OCELOT_FPGA_READ(UART_INTMASK); - - /* mask for just the interrupts we want */ - irq_src &= ~irq_mask; - - do_IRQ(ls1bit8(irq_src) + 74); -} - -struct irq_chip uart_irq_type = { - .name = "UART/FPGA", - .ack = mask_uart_irq, - .mask = mask_uart_irq, - .mask_ack = mask_uart_irq, - .unmask = unmask_uart_irq, -}; - -void uart_irq_init(void) -{ - set_irq_chip_and_handler(80, &uart_irq_type, handle_level_irq); - set_irq_chip_and_handler(81, &uart_irq_type, handle_level_irq); -} diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index aba3dbf47ed..f26ede001a0 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -9,9 +9,7 @@ obj-y += pci.o pci-dac.o # obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o -obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o -obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o @@ -22,17 +20,17 @@ obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o # obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o -obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o -obj-$(CONFIG_MIPS_EV64120) += pci-ev64120.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o +obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o -obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o -obj-$(CONFIG_MOMENCO_OCELOT_C) += fixup-ocelot-c.o pci-ocelot-c.o +obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o +obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o +obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \ pci-yosemite.o obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c index c6cd6e9cdfb..45224fd2c7b 100644 --- a/arch/mips/pci/fixup-atlas.c +++ b/arch/mips/pci/fixup-atlas.c @@ -58,7 +58,7 @@ static char irq_tab[][5] __initdata = { {0, 0, 0, 0, 0 } /* 21: Unused */ }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_tab[slot][pin]; } diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c index c2f8304fe55..ca0276c8070 100644 --- a/arch/mips/pci/fixup-au1000.c +++ b/arch/mips/pci/fixup-au1000.c @@ -35,7 +35,7 @@ extern char irq_tab_alchemy[][5]; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_tab_alchemy[slot][pin]; } diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c index 1e530751936..1416bca6d1a 100644 --- a/arch/mips/pci/fixup-capcella.c +++ b/arch/mips/pci/fixup-capcella.c @@ -38,7 +38,7 @@ static char irq_tab_capcella[][5] __initdata = { [14] = { -1, INTA, INTB, INTC, INTD } }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_tab_capcella[slot][pin]; } diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index d57ffd7242c..7fc475f7eae 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -161,7 +161,7 @@ static char irq_tab_raq2[] __initdata = { [COBALT_PCICONF_ETH1] = COBALT_ETH1_IRQ }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (cobalt_board_id < COBALT_BRD_ID_QUBE2) return irq_tab_qube1[slot]; diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c index 7abcfd175d4..a2705895561 100644 --- a/arch/mips/pci/fixup-emma2rh.c +++ b/arch/mips/pci/fixup-emma2rh.c @@ -89,7 +89,7 @@ static void __devinit emma2rh_pci_host_fixup(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH, emma2rh_pci_host_fixup); -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_map[slot][pin]; } diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c index 1da696d43f0..cd64d9f177c 100644 --- a/arch/mips/pci/fixup-excite.c +++ b/arch/mips/pci/fixup-excite.c @@ -21,7 +21,7 @@ #include <linux/pci.h> #include <excite.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (pin == 0) return -1; diff --git a/arch/mips/pci/fixup-ip32.c b/arch/mips/pci/fixup-ip32.c index 3e66b0aa63c..190fffd08d3 100644 --- a/arch/mips/pci/fixup-ip32.c +++ b/arch/mips/pci/fixup-ip32.c @@ -39,7 +39,7 @@ static char irq_tab_mace[][5] __initdata = { * irqs. I suppose a device without a pin A will thank us for doing it * right if there exists such a broken piece of crap. */ -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return irq_tab_mace[slot][pin]; } diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index 73d18503517..e974394be7b 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -33,7 +33,7 @@ #include <asm/jmr3927/jmr3927.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; diff --git a/arch/mips/pci/fixup-lm2e.c b/arch/mips/pci/fixup-lm2e.c new file mode 100644 index 00000000000..e18ae4f574c --- /dev/null +++ b/arch/mips/pci/fixup-lm2e.c @@ -0,0 +1,242 @@ +/* + * fixup-lm2e.c + * + * Copyright (C) 2004 ICT CAS + * Author: Li xiaoyu, ICT CAS + * lixy@ict.ac.cn + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/mips-boards/bonito64.h> + +/* South bridge slot number is set by the pci probe process */ +static u8 sb_slot = 5; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = 0; + + if (slot == sb_slot) { + switch (PCI_FUNC(dev->devfn)) { + case 2: + irq = 10; + break; + case 3: + irq = 11; + break; + case 5: + irq = 9; + break; + } + } else { + irq = BONITO_IRQ_BASE + 25 + pin; + } + return irq; + +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +static void __init loongson2e_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + /* Configues port 1, 2, 3, 4 to be validate*/ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4); + + /* System clock is 48-MHz Oscillator. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} + +static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev) +{ + unsigned char c; + + sb_slot = PCI_SLOT(pdev->devfn); + + printk(KERN_INFO "via686b fix: ISA bridge\n"); + + /* Enable I/O Recovery time */ + pci_write_config_byte(pdev, 0x40, 0x08); + + /* Enable ISA refresh */ + pci_write_config_byte(pdev, 0x41, 0x01); + + /* disable ISA line buffer */ + pci_write_config_byte(pdev, 0x45, 0x00); + + /* Gate INTR, and flush line buffer */ + pci_write_config_byte(pdev, 0x46, 0xe0); + + /* Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */ + /* pci_write_config_byte(pdev, 0x47, 0x20); */ + + /* + * enable PCI Delay Transaction, Enable EISA ports 4D0/4D1. + * enable time-out timer + */ + pci_write_config_byte(pdev, 0x47, 0xe6); + + /* + * enable level trigger on pci irqs: 9,10,11,13 + * important! without this PCI interrupts won't work + */ + outb(0x2e, 0x4d1); + + /* 512 K PCI Decode */ + pci_write_config_byte(pdev, 0x48, 0x01); + + /* Wait for PGNT before grant to ISA Master/DMA */ + pci_write_config_byte(pdev, 0x4a, 0x84); + + /* + * Plug'n'Play + * + * Parallel DRQ 3, Floppy DRQ 2 (default) + */ + pci_write_config_byte(pdev, 0x50, 0x0e); + + /* + * IRQ Routing for Floppy and Parallel port + * + * IRQ 6 for floppy, IRQ 7 for parallel port + */ + pci_write_config_byte(pdev, 0x51, 0x76); + + /* IRQ Routing for serial ports (take IRQ 3 and 4) */ + pci_write_config_byte(pdev, 0x52, 0x34); + + /* All IRQ's level triggered. */ + pci_write_config_byte(pdev, 0x54, 0x00); + + /* route PIRQA-D irq */ + pci_write_config_byte(pdev, 0x55, 0x90); /* bit 7-4, PIRQA */ + pci_write_config_byte(pdev, 0x56, 0xba); /* bit 7-4, PIRQC; */ + /* 3-0, PIRQB */ + pci_write_config_byte(pdev, 0x57, 0xd0); /* bit 7-4, PIRQD */ + + /* enable function 5/6, audio/modem */ + pci_read_config_byte(pdev, 0x85, &c); + c &= ~(0x3 << 2); + pci_write_config_byte(pdev, 0x85, c); + + printk(KERN_INFO"via686b fix: ISA bridge done\n"); +} + +static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev) +{ + printk(KERN_INFO"via686b fix: IDE\n"); + + /* Modify IDE controller setup */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48); + pci_write_config_byte(pdev, PCI_COMMAND, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); + pci_write_config_byte(pdev, 0x40, 0x0b); + /* legacy mode */ + pci_write_config_byte(pdev, 0x42, 0x09); + +#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */ + /* disable read prefetch/write post buffers */ + pci_write_config_byte(pdev, 0x41, 0x02); + + /* use 3/4 as fifo thresh hold */ + pci_write_config_byte(pdev, 0x43, 0x0a); + pci_write_config_byte(pdev, 0x44, 0x00); + + pci_write_config_byte(pdev, 0x45, 0x00); +#else + pci_write_config_byte(pdev, 0x41, 0xc2); + pci_write_config_byte(pdev, 0x43, 0x35); + pci_write_config_byte(pdev, 0x44, 0x1c); + + pci_write_config_byte(pdev, 0x45, 0x10); +#endif + + printk(KERN_INFO"via686b fix: IDE done\n"); +} + +static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev) +{ + /* irq routing */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10); +} + +static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev) +{ + /* irq routing */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11); +} + +static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev) +{ + unsigned int val; + unsigned char c; + + /* enable IO */ + pci_write_config_byte(pdev, PCI_COMMAND, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER); + pci_read_config_dword(pdev, 0x4, &val); + pci_write_config_dword(pdev, 0x4, val | 1); + + /* route ac97 IRQ */ + pci_write_config_byte(pdev, 0x3c, 9); + + pci_read_config_byte(pdev, 0x8, &c); + + /* link control: enable link & SGD PCM output */ + pci_write_config_byte(pdev, 0x41, 0xcc); + + /* disable game port, FM, midi, sb, enable write to reg2c-2f */ + pci_write_config_byte(pdev, 0x42, 0x20); + + /* we are using Avance logic codec */ + pci_write_config_word(pdev, 0x2c, 0x1005); + pci_write_config_word(pdev, 0x2e, 0x4710); + pci_read_config_dword(pdev, 0x2c, &val); + + pci_write_config_byte(pdev, 0x42, 0x0); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, + loongson2e_686b_func0_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, + loongson2e_686b_func1_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, + loongson2e_686b_func2_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, + loongson2e_686b_func3_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, + loongson2e_686b_func5_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + loongson2e_nec_fixup); diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c index bf2c41d1e9c..0f48498bc23 100644 --- a/arch/mips/pci/fixup-malta.c +++ b/arch/mips/pci/fixup-malta.c @@ -36,7 +36,7 @@ static char irq_tab[][5] __initdata = { {0, PCID, PCIA, PCIB, PCIC } /* 21: PCI Slot 4 */ }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int virq; virq = irq_tab[slot][pin]; diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c index 3c9ae41f751..59115962572 100644 --- a/arch/mips/pci/fixup-mpc30x.c +++ b/arch/mips/pci/fixup-mpc30x.c @@ -34,7 +34,7 @@ static const int irq_tab_mpc30x[] __initdata = { [29] = MQ200_IRQ, }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 30) return internal_func_irqs[PCI_FUNC(dev->devfn)]; diff --git a/arch/mips/pci/fixup-ocelot-c.c b/arch/mips/pci/fixup-ocelot-c.c deleted file mode 100644 index d45494807a3..00000000000 --- a/arch/mips/pci/fixup-ocelot-c.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Based on work for the Linux port to the Ocelot board, which is - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * arch/mips/momentum/ocelot_g/pci.c - * Board-specific PCI routines for mv64340 controller. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int bus = dev->bus->number; - - if (bus == 0 && slot == 1) - return 2; /* PCI-X A */ - if (bus == 1 && slot == 1) - return 12; /* PCI-X B */ - if (bus == 1 && slot == 2) - return 4; /* PCI B */ - -return 0; - panic("Whooops in pcibios_map_irq"); -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-ocelot3.c b/arch/mips/pci/fixup-ocelot3.c deleted file mode 100644 index ececc03ec62..00000000000 --- a/arch/mips/pci/fixup-ocelot3.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Montavista Software Inc. - * Author: Manish Lachwani (mlachwani@mvista.com) - * - * Looking at the schematics for the Ocelot-3 board, there are - * two PCI busses and each bus has two PCI slots. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/mipsregs.h> - -/* - * Do platform specific device initialization at - * pci_enable_device() time - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int bus = dev->bus->number; - - if (bus == 0 && slot == 1) - return 2; /* PCI-X A */ - if (bus == 0 && slot == 2) - return 3; /* PCI-X B */ - if (bus == 1 && slot == 1) - return 4; /* PCI A */ - if (bus == 1 && slot == 2) - return 5; /* PCI B */ - -return 0; - panic("Whooops in pcibios_map_irq"); -} diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c new file mode 100644 index 00000000000..00261211dbf --- /dev/null +++ b/arch/mips/pci/fixup-pmcmsp.c @@ -0,0 +1,216 @@ +/* + * PMC-Sierra MSP board specific pci fixups. + * + * Copyright 2001 MontaVista Software Inc. + * Copyright 2005-2007 PMC-Sierra, Inc + * + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef CONFIG_PCI + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/byteorder.h> + +#include <msp_pci.h> +#include <msp_cic_int.h> + +/* PCI interrupt pins */ +#define IRQ4 MSP_INT_EXT4 +#define IRQ5 MSP_INT_EXT5 +#define IRQ6 MSP_INT_EXT6 + +#if defined(CONFIG_PMC_MSP7120_GW) +/* Garibaldi Board IRQ wiring to PCI slots */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ + {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ + {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ + {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */ + {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */ +}; + +#elif defined(CONFIG_PMC_MSP7120_EVAL) + +/* MSP7120 Eval Board IRQ wiring to PCI slots */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */ + {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */ + {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */ + {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ + {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ +}; + +#else + +/* Unknown board -- don't assign any IRQs */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ + {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ + {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ + {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ + {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ +}; +#endif + +/***************************************************************************** + * + * FUNCTION: pcibios_plat_dev_init + * _________________________________________________________________________ + * + * DESCRIPTION: Perform platform specific device initialization at + * pci_enable_device() time. + * None are needed for the MSP7120 PCI Controller. + * + * INPUTS: dev - structure describing the PCI device + * + * OUTPUTS: none + * + * RETURNS: PCIBIOS_SUCCESSFUL + * + ****************************************************************************/ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: pcibios_map_irq + * _________________________________________________________________________ + * + * DESCRIPTION: Perform board supplied PCI IRQ mapping routine. + * + * INPUTS: dev - unused + * slot - PCI slot. Identified by which bit of the AD[] bus + * drives the IDSEL line. AD[10] is 0, AD[31] is + * slot 21. + * pin - numbered using the scheme of the PCI_INTERRUPT_PIN + * field of the config header. + * + * OUTPUTS: none + * + * RETURNS: IRQ number + * + ****************************************************************************/ +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ +#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL) + printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n"); +#endif + printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n", + irq_tab[slot][pin], slot, pin); + + return irq_tab[slot][pin]; +} + +#endif /* CONFIG_PCI */ diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c index 50546dab668..96857ac63bf 100644 --- a/arch/mips/pci/fixup-pnx8550.c +++ b/arch/mips/pci/fixup-pnx8550.c @@ -45,7 +45,7 @@ void __init pcibios_fixup(void) /* nothing to do here */ } -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return pnx8550_irq_tab[slot][pin]; } diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index ceeb1860895..3cdbecb8e71 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -119,7 +119,7 @@ int pci_get_irq(struct pci_dev *dev, int pin) return irq; } -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq; diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c index 36e5fb1b378..a45bedd1723 100644 --- a/arch/mips/pci/fixup-sni.c +++ b/arch/mips/pci/fixup-sni.c @@ -120,7 +120,7 @@ static inline int is_rm300_revd(void) return (csmsr & 0xa0) == 0x20; } -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (sni_brd_type) { case SNI_BRD_PCI_TOWER: diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c index 734f2b71e16..720a2b720c5 100644 --- a/arch/mips/pci/fixup-tb0219.c +++ b/arch/mips/pci/fixup-tb0219.c @@ -23,7 +23,7 @@ #include <asm/vr41xx/tb0219.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq = -1; diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c index c9e7cb4361a..e3eedf4bf9b 100644 --- a/arch/mips/pci/fixup-tb0226.c +++ b/arch/mips/pci/fixup-tb0226.c @@ -23,7 +23,7 @@ #include <asm/vr41xx/giu.h> #include <asm/vr41xx/tb0226.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq = -1; diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c index fbe6bcb2819..267ab3dc3d4 100644 --- a/arch/mips/pci/fixup-tb0287.c +++ b/arch/mips/pci/fixup-tb0287.c @@ -22,7 +22,7 @@ #include <asm/vr41xx/tb0287.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char bus; int irq = -1; diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c index f455520ada8..2485f47dfe6 100644 --- a/arch/mips/pci/fixup-tx4938.c +++ b/arch/mips/pci/fixup-tx4938.c @@ -69,7 +69,7 @@ int pci_get_irq(struct pci_dev *dev, int pin) return irq; } -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = 0; diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c index a8d9d22b13d..de5e5f6bbf4 100644 --- a/arch/mips/pci/fixup-vr4133.c +++ b/arch/mips/pci/fixup-vr4133.c @@ -169,7 +169,7 @@ void i8259_init(void) } #endif -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { extern int pci_probe_only; pci_probe_only = 1; diff --git a/arch/mips/pci/fixup-wrppmc.c b/arch/mips/pci/fixup-wrppmc.c index 3357c1300bb..3d277549d5d 100644 --- a/arch/mips/pci/fixup-wrppmc.c +++ b/arch/mips/pci/fixup-wrppmc.c @@ -25,7 +25,7 @@ static char pci_irq_tab[PCI_SLOT_MAXNR][5] __initdata = { [6] = {0, WRPPMC_PCI_INTA_IRQ, 0, 0, 0}, }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return pci_irq_tab[slot][pin]; } diff --git a/arch/mips/pci/fixup-yosemite.c b/arch/mips/pci/fixup-yosemite.c index 81d77a587a5..fdafb13a793 100644 --- a/arch/mips/pci/fixup-yosemite.c +++ b/arch/mips/pci/fixup-yosemite.c @@ -26,7 +26,7 @@ #include <linux/init.h> #include <linux/pci.h> -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (pin == 0) return -1; diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index dc35270b65a..f742c51acf0 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -29,83 +29,60 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 -/* - * PCI configuration cycle AD bus definition - */ -/* Type 0 */ -#define PCI_CFG_TYPE0_REG_SHF 0 -#define PCI_CFG_TYPE0_FUNC_SHF 8 +#ifdef CONFIG_LEMOTE_FULONG +#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset)) +#define ID_SEL_BEGIN 11 +#else +#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset)) +#define ID_SEL_BEGIN 10 +#endif +#define MAX_DEV_NUM (31 - ID_SEL_BEGIN) -/* Type 1 */ -#define PCI_CFG_TYPE1_REG_SHF 0 -#define PCI_CFG_TYPE1_FUNC_SHF 8 -#define PCI_CFG_TYPE1_DEV_SHF 11 -#define PCI_CFG_TYPE1_BUS_SHF 16 static int bonito64_pcibios_config_access(unsigned char access_type, struct pci_bus *bus, unsigned int devfn, int where, u32 * data) { - unsigned char busnum = bus->number; + u32 busnum = bus->number; + u32 addr, type; u32 dummy; - u64 pci_addr; - - /* Algorithmics Bonito64 system controller. */ + void *addrp; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int reg = where & ~3; - if ((busnum == 0) && (PCI_SLOT(devfn) > 21)) { - /* We number bus 0 devices from 0..21 */ - return -1; - } - - /* Clear cause register bits */ - BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR | - BONITO_PCICMD_MTABORT_CLR); - - /* - * Setup pattern to be used as PCI "address" for - * Type 0 cycle - */ if (busnum == 0) { - /* IDSEL */ - pci_addr = (u64) 1 << (PCI_SLOT(devfn) + 10); - } else { - /* Bus number */ - pci_addr = busnum << PCI_CFG_TYPE1_BUS_SHF; - - /* Device number */ - pci_addr |= - PCI_SLOT(devfn) << PCI_CFG_TYPE1_DEV_SHF; - } - - /* Function (same for Type 0/1) */ - pci_addr |= PCI_FUNC(devfn) << PCI_CFG_TYPE0_FUNC_SHF; - - /* Register number (same for Type 0/1) */ - pci_addr |= (where & ~0x3) << PCI_CFG_TYPE0_REG_SHF; + /* Type 0 configuration for onboard PCI bus */ + if (device > MAX_DEV_NUM) + return -1; - if (busnum == 0) { - /* Type 0 */ - BONITO_PCIMAP_CFG = pci_addr >> 16; + addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg; + type = 0; } else { - /* Type 1 */ - BONITO_PCIMAP_CFG = (pci_addr >> 16) | 0x10000; + /* Type 1 configuration for offboard PCI bus */ + addr = (busnum << 16) | (device << 11) | (function << 8) | reg; + type = 0x10000; } - pci_addr &= 0xffff; + /* Clear aborts */ + BONITO_PCICMD |= BONITO_PCICMD_MABORT_CLR | BONITO_PCICMD_MTABORT_CLR; + + BONITO_PCIMAP_CFG = (addr >> 16) | type; /* Flush Bonito register block */ dummy = BONITO_PCIMAP_CFG; - iob(); /* sync */ + mmiowb(); - /* Perform access */ + addrp = CFG_SPACE_REG(addr & 0xffff); if (access_type == PCI_ACCESS_WRITE) { - *(volatile u32 *) (_pcictrl_bonito_pcicfg + (u32)pci_addr) = *(u32 *) data; - + writel(cpu_to_le32(*data), addrp); +#ifndef CONFIG_LEMOTE_FULONG /* Wait till done */ while (BONITO_PCIMSTAT & 0xF); +#endif } else { - *(u32 *) data = *(volatile u32 *) (_pcictrl_bonito_pcicfg + (u32)pci_addr); + *data = le32_to_cpu(readl(addrp)); } /* Detect Master/Target abort */ @@ -121,6 +98,7 @@ static int bonito64_pcibios_config_access(unsigned char access_type, } return 0; + } diff --git a/arch/mips/pci/ops-marvell.c b/arch/mips/pci/ops-marvell.c deleted file mode 100644 index 1ac5c59199d..00000000000 --- a/arch/mips/pci/ops-marvell.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> - -#include <asm/marvell.h> - -static int mv_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - struct mv_pci_controller *mvbc = bus->sysdata; - unsigned long address_reg, data_reg; - u32 address; - - address_reg = mvbc->config_addr; - data_reg = mvbc->config_vreg; - - /* Accessing device 31 crashes those Marvells. Since years. - Will they ever make sane controllers ... */ - if (PCI_SLOT(devfn) == 31) - return PCIBIOS_DEVICE_NOT_FOUND; - - address = (bus->number << 16) | (devfn << 8) | - (where & 0xfc) | 0x80000000; - - /* start the configuration cycle */ - MV_WRITE(address_reg, address); - - switch (size) { - case 1: - *val = MV_READ_8(data_reg + (where & 0x3)); - break; - - case 2: - *val = MV_READ_16(data_reg + (where & 0x3)); - break; - - case 4: - *val = MV_READ(data_reg); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int mv_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - struct mv_pci_controller *mvbc = bus->sysdata; - unsigned long address_reg, data_reg; - u32 address; - - address_reg = mvbc->config_addr; - data_reg = mvbc->config_vreg; - - /* Accessing device 31 crashes those Marvells. Since years. - Will they ever make sane controllers ... */ - if (PCI_SLOT(devfn) == 31) - return PCIBIOS_DEVICE_NOT_FOUND; - - address = (bus->number << 16) | (devfn << 8) | - (where & 0xfc) | 0x80000000; - - /* start the configuration cycle */ - MV_WRITE(address_reg, address); - - switch (size) { - case 1: - MV_WRITE_8(data_reg + (where & 0x3), val); - break; - - case 2: - MV_WRITE_16(data_reg + (where & 0x3), val); - break; - - case 4: - MV_WRITE(data_reg, val); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops mv_pci_ops = { - .read = mv_read_config, - .write = mv_write_config -}; diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c deleted file mode 100644 index a8d38dc8c50..00000000000 --- a/arch/mips/pci/ops-nile4.c +++ /dev/null @@ -1,147 +0,0 @@ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/bootinfo.h> - -#include <asm/lasat/lasat.h> -#include <asm/gt64120.h> -#include <asm/nile4.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#define LO(reg) (reg / 4) -#define HI(reg) (reg / 4 + 1) - -volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE; - -static DEFINE_SPINLOCK(nile4_pci_lock); - -static int nile4_pcibios_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, int where, u32 * val) -{ - unsigned char busnum = bus->number; - u32 adr, mask, err; - - if ((busnum == 0) && (PCI_SLOT(devfn) > 8)) - /* The addressing scheme chosen leaves room for just - * 8 devices on the first busnum (besides the PCI - * controller itself) */ - return PCIBIOS_DEVICE_NOT_FOUND; - - if ((busnum == 0) && (devfn == PCI_DEVFN(0, 0))) { - /* Access controller registers directly */ - if (access_type == PCI_ACCESS_WRITE) { - vrc_pciregs[(0x200 + where) >> 2] = *val; - } else { - *val = vrc_pciregs[(0x200 + where) >> 2]; - } - return PCIBIOS_SUCCESSFUL; - } - - /* Temporarily map PCI Window 1 to config space */ - mask = vrc_pciregs[LO(NILE4_PCIINIT1)]; - vrc_pciregs[LO(NILE4_PCIINIT1)] = 0x0000001a | (busnum ? 0x200 : 0); - - /* Clear PCI Error register. This also clears the Error Type - * bits in the Control register */ - vrc_pciregs[LO(NILE4_PCIERR)] = 0; - vrc_pciregs[HI(NILE4_PCIERR)] = 0; - - /* Setup address */ - if (busnum == 0) - adr = - KSEG1ADDR(PCI_WINDOW1) + - ((1 << (PCI_SLOT(devfn) + 15)) | (PCI_FUNC(devfn) << 8) - | (where & ~3)); - else - adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) | - (where & ~3); - - if (access_type == PCI_ACCESS_WRITE) - *(u32 *) adr = *val; - else - *val = *(u32 *) adr; - - /* Check for master or target abort */ - err = (vrc_pciregs[HI(NILE4_PCICTRL)] >> 5) & 0x7; - - /* Restore PCI Window 1 */ - vrc_pciregs[LO(NILE4_PCIINIT1)] = mask; - - if (err) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - unsigned long flags; - u32 data = 0; - int err; - - if ((size == 2) && (where & 1)) - return PCIBIOS_BAD_REGISTER_NUMBER; - else if ((size == 4) && (where & 3)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - spin_lock_irqsave(&nile4_pci_lock, flags); - err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, - &data); - spin_unlock_irqrestore(&nile4_pci_lock, flags); - - if (err) - return err; - - if (size == 1) - *val = (data >> ((where & 3) << 3)) & 0xff; - else if (size == 2) - *val = (data >> ((where & 3) << 3)) & 0xffff; - else - *val = data; - - return PCIBIOS_SUCCESSFUL; -} - -static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - unsigned long flags; - u32 data = 0; - int err; - - if ((size == 2) && (where & 1)) - return PCIBIOS_BAD_REGISTER_NUMBER; - else if ((size == 4) && (where & 3)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - spin_lock_irqsave(&nile4_pci_lock, flags); - err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, - &data); - spin_unlock_irqrestore(&nile4_pci_lock, flags); - - if (err) - return err; - - if (size == 1) - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else if (size == 2) - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else - data = val; - - if (nile4_pcibios_config_access - (PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops nile4_pci_ops = { - .read = nile4_pcibios_read, - .write = nile4_pcibios_write, -}; diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c new file mode 100644 index 00000000000..09fa007c1d1 --- /dev/null +++ b/arch/mips/pci/ops-pmcmsp.c @@ -0,0 +1,994 @@ +/* + * PMC-Sierra MSP board specific pci_ops + * + * Copyright 2001 MontaVista Software Inc. + * Copyright 2005-2007 PMC-Sierra, Inc + * + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * Much of the code is derived from the original DDB5074 port by + * Geert Uytterhoeven <geert@sonycom.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#define PCI_COUNTERS 1 + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/byteorder.h> +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) +#include <asm/mipsmtregs.h> +#endif + +#include <msp_prom.h> +#include <msp_cic_int.h> +#include <msp_pci.h> +#include <msp_regs.h> +#include <msp_regops.h> + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) +static char proc_init; +extern struct proc_dir_entry *proc_bus_pci_dir; +unsigned int pci_int_count[32]; + +static void pci_proc_init(void); + +/***************************************************************************** + * + * FUNCTION: read_msp_pci_counts + * _________________________________________________________________________ + * + * DESCRIPTION: Prints the count of how many times each PCI + * interrupt has asserted. Can be invoked by the + * /proc filesystem. + * + * INPUTS: page - part of STDOUT calculation + * off - part of STDOUT calculation + * count - part of STDOUT calculation + * data - unused + * + * OUTPUTS: start - new start location + * eof - end of file pointer + * + * RETURNS: len - STDOUT length + * + ****************************************************************************/ +static int read_msp_pci_counts(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int i; + int len = 0; + unsigned int intcount, total = 0; + + for (i = 0; i < 32; ++i) { + intcount = pci_int_count[i]; + if (intcount != 0) { + len += sprintf(page + len, "[%d] = %u\n", i, intcount); + total += intcount; + } + } + + len += sprintf(page + len, "total = %u\n", total); + if (len <= off+count) + *eof = 1; + + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +/***************************************************************************** + * + * FUNCTION: gen_pci_cfg_wr + * _________________________________________________________________________ + * + * DESCRIPTION: Generates a configuration write cycle for debug purposes. + * The IDSEL line asserted and location and data written are + * immaterial. Just want to be able to prove that a + * configuration write can be correctly generated on the + * PCI bus. Intent is that this function by invocable from + * the /proc filesystem. + * + * INPUTS: page - part of STDOUT calculation + * off - part of STDOUT calculation + * count - part of STDOUT calculation + * data - unused + * + * OUTPUTS: start - new start location + * eof - end of file pointer + * + * RETURNS: len - STDOUT length + * + ****************************************************************************/ +static int gen_pci_cfg_wr(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + unsigned char where = 0; /* Write to static Device/Vendor ID */ + unsigned char bus_num = 0; /* Bus 0 */ + unsigned char dev_fn = 0xF; /* Arbitrary device number */ + u32 wr_data = 0xFF00AA00; /* Arbitrary data */ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + int len = 0; + unsigned long value; + int intr; + + len += sprintf(page + len, "PMC MSP PCI: Beginning\n"); + + if (proc_init == 0) { + pci_proc_init(); + proc_init = ~0; + } + + len += sprintf(page + len, "PMC MSP PCI: Before Cfg Wr\n"); + + /* + * Generate PCI Configuration Write Cycle + */ + + /* Clear cause register bits */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + + /* Setup address that is to appear on PCI bus */ + preg->config_addr = BPCI_CFGADDR_ENABLE | + (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | + (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | + (where & 0xFC); + + value = cpu_to_le32(wr_data); + + /* Launch the PCI configuration write cycle */ + *PCI_CONFIG_SPACE_REG = value; + + /* + * Check if the PCI configuration cycle (rd or wr) succeeded, by + * checking the status bits for errors like master or target abort. + */ + intr = preg->if_status; + + len += sprintf(page + len, "PMC MSP PCI: After Cfg Wr\n"); + + /* Handle STDOUT calculations */ + if (len <= off+count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + + return len; +} + +/***************************************************************************** + * + * FUNCTION: pci_proc_init + * _________________________________________________________________________ + * + * DESCRIPTION: Create entries in the /proc filesystem for debug access. + * + * INPUTS: none + * + * OUTPUTS: none + * + * RETURNS: none + * + ****************************************************************************/ +static void pci_proc_init(void) +{ + create_proc_read_entry("pmc_msp_pci_rd_cnt", 0, NULL, + read_msp_pci_counts, NULL); + create_proc_read_entry("pmc_msp_pci_cfg_wr", 0, NULL, + gen_pci_cfg_wr, NULL); +} +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + +spinlock_t bpci_lock = SPIN_LOCK_UNLOCKED; + +/***************************************************************************** + * + * STRUCT: pci_io_resource + * _________________________________________________________________________ + * + * DESCRIPTION: Defines the address range that pciauto() will use to + * assign to the I/O BARs of PCI devices. + * + * Use the start and end addresses of the MSP7120 PCI Host + * Controller I/O space, in the form that they appear on the + * PCI bus AFTER MSP7120 has performed address translation. + * + * For I/O accesses, MSP7120 ignores OATRAN and maps I/O + * accesses into the bottom 0xFFF region of address space, + * so that is the range to put into the pci_io_resource + * struct. + * + * In MSP4200, the start address was 0x04 instead of the + * expected 0x00. Will just assume there was a good reason + * for this! + * + * NOTES: Linux, by default, will assign I/O space to the lowest + * region of address space. Since MSP7120 and Linux, + * by default, have no offset in between how they map, the + * io_offset element of pci_controller struct should be set + * to zero. + * ELEMENTS: + * name - String used for a meaningful name. + * + * start - Start address of MSP7120's I/O space, as MSP7120 presents + * the address on the PCI bus. + * + * end - End address of MSP7120's I/O space, as MSP7120 presents + * the address on the PCI bus. + * + * flags - Attributes indicating the type of resource. In this case, + * indicate I/O space. + * + ****************************************************************************/ +static struct resource pci_io_resource = { + .name = "pci IO space", + .start = 0x04, + .end = 0x0FFF, + .flags = IORESOURCE_IO /* I/O space */ +}; + +/***************************************************************************** + * + * STRUCT: pci_mem_resource + * _________________________________________________________________________ + * + * DESCRIPTION: Defines the address range that pciauto() will use to + * assign to the memory BARs of PCI devices. + * + * The .start and .end values are dependent upon how address + * translation is performed by the OATRAN regiser. + * + * The values to use for .start and .end are the values + * in the form they appear on the PCI bus AFTER MSP7120 has + * performed OATRAN address translation. + * + * ELEMENTS: + * name - String used for a meaningful name. + * + * start - Start address of MSP7120's memory space, as MSP7120 presents + * the address on the PCI bus. + * + * end - End address of MSP7120's memory space, as MSP7120 presents + * the address on the PCI bus. + * + * flags - Attributes indicating the type of resource. In this case, + * indicate memory space. + * + ****************************************************************************/ +static struct resource pci_mem_resource = { + .name = "pci memory space", + .start = MSP_PCI_SPACE_BASE, + .end = MSP_PCI_SPACE_END, + .flags = IORESOURCE_MEM /* memory space */ +}; + +/***************************************************************************** + * + * FUNCTION: bpci_interrupt + * _________________________________________________________________________ + * + * DESCRIPTION: PCI status interrupt handler. Updates the count of how + * many times each status bit has been set, then clears + * the status bits. If the appropriate macros are defined, + * these counts can be viewed via the /proc filesystem. + * + * INPUTS: irq - unused + * dev_id - unused + * pt_regs - unused + * + * OUTPUTS: none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * + ****************************************************************************/ +static int bpci_interrupt(int irq, void *dev_id) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + unsigned int stat = preg->if_status; + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) + int i; + for (i = 0; i < 32; ++i) { + if ((1 << i) & stat) + ++pci_int_count[i]; + } +#endif /* PROC_FS && PCI_COUNTERS */ + + /* printk("PCI ISR: Status=%08X\n", stat); */ + + /* write to clear all asserted interrupts */ + preg->if_status = stat; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_config_access + * _________________________________________________________________________ + * + * DESCRIPTION: Performs a PCI configuration access (rd or wr), then + * checks that the access succeeded by querying MSP7120's + * PCI status bits. + * + * INPUTS: + * access_type - kind of PCI configuration cycle to perform + * (read or write). Legal values are + * PCI_ACCESS_WRITE and PCI_ACCESS_READ. + * + * bus - pointer to the bus number of the device to + * be targetted for the configuration cycle. + * The only element of the pci_bus structure + * used is bus->number. This argument determines + * if the configuration access will be Type 0 or + * Type 1. Since MSP7120 assumes itself to be the + * PCI Host, any non-zero bus->number generates + * a Type 1 access. + * + * devfn - this is an 8-bit field. The lower three bits + * specify the function number of the device to + * be targetted for the configuration cycle, with + * all three-bit combinations being legal. The + * upper five bits specify the device number, + * with legal values being 10 to 31. + * + * where - address within the Configuration Header + * space to access. + * + * data - for write accesses, contains the data to + * write. + * + * OUTPUTS: + * data - for read accesses, contains the value read. + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - access failure + * + ****************************************************************************/ +int msp_pcibios_config_access(unsigned char access_type, + struct pci_bus *bus, + unsigned int devfn, + unsigned char where, + u32 *data) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + unsigned char bus_num = bus->number; + unsigned char dev_fn = (unsigned char)devfn; + unsigned long flags; + unsigned long intr; + unsigned long value; + static char pciirqflag; +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + unsigned int vpe_status; +#endif + +#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) + if (proc_init == 0) { + pci_proc_init(); + proc_init = ~0; + } +#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ + + /* + * Just the first time this function invokes, allocate + * an interrupt line for PCI host status interrupts. The + * allocation assigns an interrupt handler to the interrupt. + */ + if (pciirqflag == 0) { + request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */ + bpci_interrupt, + SA_SHIRQ | SA_INTERRUPT, + "PMC MSP PCI Host", + preg); + pciirqflag = ~0; + } + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + local_irq_save(flags); + vpe_status = dvpe(); +#else + spin_lock_irqsave(&bpci_lock, flags); +#endif + + /* + * Clear PCI cause register bits. + * + * In Polo, the PCI Host had a dedicated DMA called the + * Block Copy (not to be confused with the general purpose Block + * Copy Engine block). There appear to have been special interrupts + * for this Block Copy, called Block Copy 0 Fault (BC0F) and + * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this + * dedicated Block Copy block, so these two interrupts are now + * marked reserved. In case the Block Copy is resurrected in a + * future design, maintain the code that treats these two interrupts + * specially. + * + * Write to clear all interrupts in the PCI status register, aside + * from BC0F and BC1F. + */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + + /* Setup address that is to appear on PCI bus */ + preg->config_addr = BPCI_CFGADDR_ENABLE | + (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | + (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | + (where & 0xFC); + + /* IF access is a PCI configuration write */ + if (access_type == PCI_ACCESS_WRITE) { + value = cpu_to_le32(*data); + *PCI_CONFIG_SPACE_REG = value; + } else { + /* ELSE access is a PCI configuration read */ + value = le32_to_cpu(*PCI_CONFIG_SPACE_REG); + *data = value; + } + + /* + * Check if the PCI configuration cycle (rd or wr) succeeded, by + * checking the status bits for errors like master or target abort. + */ + intr = preg->if_status; + + /* Clear config access */ + preg->config_addr = 0; + + /* IF error occurred */ + if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) { + /* Clear status bits */ + preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + evpe(vpe_status); + local_irq_restore(flags); +#else + spin_unlock_irqrestore(&bpci_lock, flags); +#endif + + return -1; + } + +#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) + evpe(vpe_status); + local_irq_restore(flags); +#else + spin_unlock_irqrestore(&bpci_lock, flags); +#endif + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_byte + * _________________________________________________________________________ + * + * DESCRIPTION: Read a byte from PCI configuration address spac + * Since the hardware can't address 8 bit chunks + * directly, read a 32-bit chunk, then mask off extraneous + * bits. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_byte(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = (data >> ((where & 3) << 3)) & 0x0ff; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_word + * _________________________________________________________________________ + * + * DESCRIPTION: Read a word (16 bits) from PCI configuration address space. + * Since the hardware can't address 16 bit chunks + * directly, read a 32-bit chunk, then mask off extraneous + * bits. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_word(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* if (where & 1) */ /* Commented out non-compliant code. + * Should allow word access to configuration + * registers, with only exception being when + * the word access would wrap around into + * the next dword. + */ + if ((where & 3) == 3) { + *val = 0xFFFFFFFF; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = (data >> ((where & 3) << 3)) & 0x0ffff; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config_dword + * _________________________________________________________________________ + * + * DESCRIPTION: Read a double word (32 bits) from PCI configuration + * address space. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. + * + * OUTPUTS val - read data + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - read access failure + * + ****************************************************************************/ +static int +msp_pcibios_read_config_dword(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 *val) +{ + u32 data = 0; + + /* Address must be dword aligned. */ + if (where & 3) { + *val = 0xFFFFFFFF; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + /* + * If the config access did not complete normally (e.g., underwent + * master abort) do the PCI compliant thing, which is to supply an + * all ones value. + */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) { + *val = 0xFFFFFFFF; + return -1; + } + + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_byte + * _________________________________________________________________________ + * + * DESCRIPTION: Write a byte to PCI configuration address space. + * Since the hardware can't address 8 bit chunks + * directly, a read-modify-write is performed. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_byte(struct pci_bus *bus, + unsigned int devfn, + int where, + u8 val) +{ + u32 data = 0; + + /* read config space */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + /* modify the byte within the dword */ + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + /* write back the full dword */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_word + * _________________________________________________________________________ + * + * DESCRIPTION: Write a word (16-bits) to PCI configuration address space. + * Since the hardware can't address 16 bit chunks + * directly, a read-modify-write is performed. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_word(struct pci_bus *bus, + unsigned int devfn, + int where, + u16 val) +{ + u32 data = 0; + + /* Fixed non-compliance: if (where & 1) */ + if ((where & 3) == 3) + return PCIBIOS_BAD_REGISTER_NUMBER; + + /* read config space */ + if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) + return -1; + + /* modify the word within the dword */ + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + /* write back the full dword */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config_dword + * _________________________________________________________________________ + * + * DESCRIPTION: Write a double word (32-bits) to PCI configuration address + * space. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write + * + * OUTPUTS none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - write access failure + * + ****************************************************************************/ +static int +msp_pcibios_write_config_dword(struct pci_bus *bus, + unsigned int devfn, + int where, + u32 val) +{ + /* check that address is dword aligned */ + if (where & 3) + return PCIBIOS_BAD_REGISTER_NUMBER; + + /* perform write */ + if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_read_config + * _________________________________________________________________________ + * + * DESCRIPTION: Interface the PCI configuration read request with + * the appropriate function, based on how many bytes + * the read request is. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * size - in units of bytes, should be 1, 2, or 4. + * + * OUTPUTS val - value read, with any extraneous bytes masked + * to zero. + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - failure + * + ****************************************************************************/ +int +msp_pcibios_read_config(struct pci_bus *bus, + unsigned int devfn, + int where, + int size, + u32 *val) +{ + if (size == 1) { + if (msp_pcibios_read_config_byte(bus, devfn, where, val)) { + return -1; + } + } else if (size == 2) { + if (msp_pcibios_read_config_word(bus, devfn, where, val)) { + return -1; + } + } else if (size == 4) { + if (msp_pcibios_read_config_dword(bus, devfn, where, val)) { + return -1; + } + } else { + *val = 0xFFFFFFFF; + return -1; + } + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * FUNCTION: msp_pcibios_write_config + * _________________________________________________________________________ + * + * DESCRIPTION: Interface the PCI configuration write request with + * the appropriate function, based on how many bytes + * the read request is. + * + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * size - in units of bytes, should be 1, 2, or 4. + * val - value to write + * + * OUTPUTS: none + * + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - failure + * + ****************************************************************************/ +int +msp_pcibios_write_config(struct pci_bus *bus, + unsigned int devfn, + int where, + int size, + u32 val) +{ + if (size == 1) { + if (msp_pcibios_write_config_byte(bus, devfn, + where, (u8)(0xFF & val))) { + return -1; + } + } else if (size == 2) { + if (msp_pcibios_write_config_word(bus, devfn, + where, (u16)(0xFFFF & val))) { + return -1; + } + } else if (size == 4) { + if (msp_pcibios_write_config_dword(bus, devfn, where, val)) { + return -1; + } + } else { + return -1; + } + + return PCIBIOS_SUCCESSFUL; +} + +/***************************************************************************** + * + * STRUCTURE: msp_pci_ops + * _________________________________________________________________________ + * + * DESCRIPTION: structure to abstract the hardware specific PCI + * configuration accesses. + * + * ELEMENTS: + * read - function for Linux to generate PCI Configuration reads. + * write - function for Linux to generate PCI Configuration writes. + * + ****************************************************************************/ +struct pci_ops msp_pci_ops = { + .read = msp_pcibios_read_config, + .write = msp_pcibios_write_config +}; + +/***************************************************************************** + * + * STRUCTURE: msp_pci_controller + * _________________________________________________________________________ + * + * Describes the attributes of the MSP7120 PCI Host Controller + * + * ELEMENTS: + * pci_ops - abstracts the hardware specific PCI configuration + * accesses. + * + * mem_resource - address range pciauto() uses to assign to PCI device + * memory BARs. + * + * mem_offset - offset between how MSP7120 outbound PCI memory + * transaction addresses appear on the PCI bus and how Linux + * wants to configure memory BARs of the PCI devices. + * MSP7120 does nothing funky, so just set to zero. + * + * io_resource - address range pciauto() uses to assign to PCI device + * I/O BARs. + * + * io_offset - offset between how MSP7120 outbound PCI I/O + * transaction addresses appear on the PCI bus and how + * Linux defaults to configure I/O BARs of the PCI devices. + * MSP7120 maps outbound I/O accesses into the bottom + * bottom 4K of PCI address space (and ignores OATRAN). + * Since the Linux default is to configure I/O BARs to the + * bottom 4K, no special offset is needed. Just set to zero. + * + ****************************************************************************/ +static struct pci_controller msp_pci_controller = { + .pci_ops = &msp_pci_ops, + .mem_resource = &pci_mem_resource, + .mem_offset = 0, + .io_resource = &pci_io_resource, + .io_offset = 0 +}; + +/***************************************************************************** + * + * FUNCTION: msp_pci_init + * _________________________________________________________________________ + * + * DESCRIPTION: Initialize the PCI Host Controller and register it with + * Linux so Linux can seize control of the PCI bus. + * + ****************************************************************************/ +void __init msp_pci_init(void) +{ + struct msp_pci_regs *preg = (void *)PCI_BASE_REG; + u32 id; + + /* Extract Device ID */ + id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12; + + /* Check if JTAG ID identifies MSP7120 */ + if (!MSP_HAS_PCI(id)) { + printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id); + goto no_pci; + } + + /* + * Enable flushing of the PCI-SDRAM queue upon a read + * of the SDRAM's Memory Configuration Register. + */ + *(unsigned long *)QFLUSH_REG_1 = 3; + + /* Configure PCI Host Controller. */ + preg->if_status = ~0; /* Clear cause register bits */ + preg->config_addr = 0; /* Clear config access */ + preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */ + preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */ + + /* configure so inb(), outb(), and family are functional */ + set_io_port_base(MSP_PCI_IOSPACE_BASE); + + /* Tell Linux the details of the MSP7120 PCI Host Controller */ + register_pci_controller(&msp_pci_controller); + + return; + +no_pci: + /* Disable PCI channel */ + printk(KERN_WARNING "PCI: no host PCI bus detected\n"); +} diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c index 44500708451..a450c406203 100644 --- a/arch/mips/pci/ops-tx4938.c +++ b/arch/mips/pci/ops-tx4938.c @@ -46,50 +46,63 @@ struct resource tx4938_pcic1_pci_mem_resource = { .flags = IORESOURCE_MEM }; -static int mkaddr(int bus, int dev_fn, int where, int *flagsp) +static int mkaddr(int bus, int dev_fn, int where, + struct tx4938_pcic_reg *pcicptr) { if (bus > 0) { /* Type 1 configuration */ - tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | + pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1; } else { if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0)) return -1; /* Type 0 configuration */ - tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | + pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | ((dev_fn & 0xff) << 0x08) | (where & 0xfc); } /* clear M_ABORT and Disable M_ABORT Int. */ - tx4938_pcicptr->pcistatus = - (tx4938_pcicptr->pcistatus & 0x0000ffff) | + pcicptr->pcistatus = + (pcicptr->pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT << 16); - tx4938_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; + pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; return 0; } -static int check_abort(int flags) +static int check_abort(struct tx4938_pcic_reg *pcicptr) { int code = PCIBIOS_SUCCESSFUL; /* wait write cycle completion before checking error status */ - while (tx4938_pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB) + while (pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB) ; - if (tx4938_pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { - tx4938_pcicptr->pcistatus = - (tx4938_pcicptr-> + if (pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { + pcicptr->pcistatus = + (pcicptr-> pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT << 16); - tx4938_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; + pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; code = PCIBIOS_DEVICE_NOT_FOUND; } return code; } +extern struct pci_controller tx4938_pci_controller[]; +extern struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch); + +static struct tx4938_pcic_reg *pci_bus_to_pcicptr(struct pci_bus *bus) +{ + struct pci_controller *channel = bus->sysdata; + return get_tx4938_pcicptr(channel - &tx4938_pci_controller[0]); +} + static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - int flags, retval, dev, busno, func; + int retval, dev, busno, func; + struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus); + void __iomem *cfgdata = + (void __iomem *)(unsigned long)&pcicptr->g2pcfgdata; dev = PCI_SLOT(devfn); func = PCI_FUNC(devfn); @@ -101,32 +114,32 @@ static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, busno = 0; } - if (mkaddr(busno, devfn, where, &flags)) + if (mkaddr(busno, devfn, where, pcicptr)) return -1; switch (size) { case 1: - *val = *(volatile u8 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata | #ifdef __BIG_ENDIAN - ((where & 3) ^ 3)); + cfgdata += (where & 3) ^ 3; #else - (where & 3)); + cfgdata += where & 3; #endif + *val = __raw_readb(cfgdata); break; case 2: - *val = *(volatile u16 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata | #ifdef __BIG_ENDIAN - ((where & 3) ^ 2)); + cfgdata += (where & 2) ^ 2; #else - (where & 3)); + cfgdata += where & 2; #endif + *val = __raw_readw(cfgdata); break; case 4: - *val = tx4938_pcicptr->g2pcfgdata; + *val = __raw_readl(cfgdata); break; } - retval = check_abort(flags); + retval = check_abort(pcicptr); if (retval == PCIBIOS_DEVICE_NOT_FOUND) *val = 0xffffffff; @@ -136,7 +149,10 @@ static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - int flags, dev, busno, func; + int dev, busno, func; + struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus); + void __iomem *cfgdata = + (void __iomem *)(unsigned long)&pcicptr->g2pcfgdata; busno = bus->number; dev = PCI_SLOT(devfn); @@ -149,32 +165,32 @@ static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, busno = 0; } - if (mkaddr(busno, devfn, where, &flags)) + if (mkaddr(busno, devfn, where, pcicptr)) return -1; switch (size) { case 1: - *(volatile u8 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata | #ifdef __BIG_ENDIAN - ((where & 3) ^ 3)) = val; + cfgdata += (where & 3) ^ 3; #else - (where & 3)) = val; + cfgdata += where & 3; #endif + __raw_writeb(val, cfgdata); break; case 2: - *(volatile u16 *) ((unsigned long) & tx4938_pcicptr->g2pcfgdata | #ifdef __BIG_ENDIAN - ((where & 0x3) ^ 0x2)) = val; + cfgdata += (where & 2) ^ 2; #else - (where & 3)) = val; + cfgdata += where & 2; #endif + __raw_writew(val, cfgdata); break; case 4: - tx4938_pcicptr->g2pcfgdata = val; + __raw_writel(val, cfgdata); break; } - return check_abort(flags); + return check_abort(pcicptr); } struct pci_ops tx4938_pci_ops = { diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index d7b9e1349f6..2b4e30c7d10 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -74,8 +74,9 @@ static inline void WRITECFG32(u32 addr, u32 data) *(u32 *)(cfg_space + (addr & ~3)) = data; } -int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { + This is b0rked. return dev->irq; } diff --git a/arch/mips/pci/pci-ddb5477.c b/arch/mips/pci/pci-ddb5477.c index d071bc375b1..7363e187784 100644 --- a/arch/mips/pci/pci-ddb5477.c +++ b/arch/mips/pci/pci-ddb5477.c @@ -131,7 +131,7 @@ static unsigned char rockhopperII_irq_map[MAX_SLOT_NUM] = { /* SLOT: 20, AD:31 */ VRC5477_IRQ_IOPCI_INTA, /* vrc5477 usb host */ }; -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int slot_num; unsigned char *slot_irq_map; diff --git a/arch/mips/pci/pci-ev64120.c b/arch/mips/pci/pci-ev64120.c deleted file mode 100644 index a84f594b5a1..00000000000 --- a/arch/mips/pci/pci-ev64120.c +++ /dev/null @@ -1,22 +0,0 @@ -#include <linux/pci.h> -#include <asm/irq.h> - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - if (!pin) - return 0; - - irq = allocate_irqno(); - if (irq < 0) - return 0; - - return irq; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 405ce015273..a322543ac34 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -134,7 +134,7 @@ int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid) * A given PCI device, in general, should be able to intr any of the cpus * on any one of the hubs connected to its xbow. */ -int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); int irq = bc->pci_int[slot]; diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c deleted file mode 100644 index 985784a3e6f..00000000000 --- a/arch/mips/pci/pci-lasat.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000, 2001, 04 Keith M Wesolowski - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/types.h> -#include <asm/bootinfo.h> - -extern struct pci_ops nile4_pci_ops; -extern struct pci_ops gt64xxx_pci0_ops; -static struct resource lasat_pci_mem_resource = { - .name = "LASAT PCI MEM", - .start = 0x18000000, - .end = 0x19ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct resource lasat_pci_io_resource = { - .name = "LASAT PCI IO", - .start = 0x1a000000, - .end = 0x1bffffff, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller lasat_pci_controller = { - .mem_resource = &lasat_pci_mem_resource, - .io_resource = &lasat_pci_io_resource, -}; - -static int __init lasat_pci_setup(void) -{ - printk("PCI: starting\n"); - - switch (mips_machtype) { - case MACH_LASAT_100: - lasat_pci_controller.pci_ops = >64xxx_pci0_ops; - break; - case MACH_LASAT_200: - lasat_pci_controller.pci_ops = &nile4_pci_ops; - break; - default: - panic("pcibios_init: mips_machtype incorrect"); - } - - register_pci_controller(&lasat_pci_controller); - - return 0; -} - -arch_initcall(lasat_pci_setup); - -#define LASATINT_ETH1 0 -#define LASATINT_ETH0 1 -#define LASATINT_HDC 2 -#define LASATINT_COMP 3 -#define LASATINT_HDLC 4 -#define LASATINT_PCIA 5 -#define LASATINT_PCIB 6 -#define LASATINT_PCIC 7 -#define LASATINT_PCID 8 - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - switch (slot) { - case 1: - case 2: - case 3: - return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4); - case 4: - return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */ - case 5: - return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */ - case 6: - return LASATINT_HDC; /* IDE controller */ - default: - return 0xff; /* Illegal */ - } - - return -1; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/pci-ocelot-c.c b/arch/mips/pci/pci-ocelot-c.c deleted file mode 100644 index 027759f7c90..00000000000 --- a/arch/mips/pci/pci-ocelot-c.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org) - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/mv643xx.h> - -#include <linux/init.h> - -#include <asm/marvell.h> - -/* - * We assume the address ranges have already been setup appropriately by - * the firmware. PMON in case of the Ocelot C does that. - */ -static struct resource mv_pci_io_mem0_resource = { - .name = "MV64340 PCI0 IO MEM", - .flags = IORESOURCE_IO -}; - -static struct resource mv_pci_mem0_resource = { - .name = "MV64340 PCI0 MEM", - .flags = IORESOURCE_MEM -}; - -static struct mv_pci_controller mv_bus0_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = &mv_pci_mem0_resource, - .io_resource = &mv_pci_io_mem0_resource, - }, - .config_addr = MV64340_PCI_0_CONFIG_ADDR, - .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, -}; - -static uint32_t mv_io_base, mv_io_size; - -static void mv64340_pci0_init(void) -{ - uint32_t mem0_base, mem0_size; - uint32_t io_base, io_size; - - io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16; - io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16; - mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16; - mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16; - - mv_pci_io_mem0_resource.start = 0; - mv_pci_io_mem0_resource.end = io_size - 1; - mv_pci_mem0_resource.start = mem0_base; - mv_pci_mem0_resource.end = mem0_base + mem0_size - 1; - mv_bus0_controller.pcic.mem_offset = mem0_base; - mv_bus0_controller.pcic.io_offset = 0; - - ioport_resource.end = io_size - 1; - - register_pci_controller(&mv_bus0_controller.pcic); - - mv_io_base = io_base; - mv_io_size = io_size; -} - -static struct resource mv_pci_io_mem1_resource = { - .name = "MV64340 PCI1 IO MEM", - .flags = IORESOURCE_IO -}; - -static struct resource mv_pci_mem1_resource = { - .name = "MV64340 PCI1 MEM", - .flags = IORESOURCE_MEM -}; - -static struct mv_pci_controller mv_bus1_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = &mv_pci_mem1_resource, - .io_resource = &mv_pci_io_mem1_resource, - }, - .config_addr = MV64340_PCI_1_CONFIG_ADDR, - .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, -}; - -static __init void mv64340_pci1_init(void) -{ - uint32_t mem0_base, mem0_size; - uint32_t io_base, io_size; - - io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16; - io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16; - mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16; - mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16; - - /* - * Here we assume the I/O window of second bus to be contiguous with - * the first. A gap is no problem but would waste address space for - * remapping the port space. - */ - mv_pci_io_mem1_resource.start = mv_io_size; - mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1; - mv_pci_mem1_resource.start = mem0_base; - mv_pci_mem1_resource.end = mem0_base + mem0_size - 1; - mv_bus1_controller.pcic.mem_offset = mem0_base; - mv_bus1_controller.pcic.io_offset = 0; - - ioport_resource.end = io_base + io_size -mv_io_base - 1; - - register_pci_controller(&mv_bus1_controller.pcic); - - mv_io_size = io_base + io_size - mv_io_base; -} - -static __init int __init ocelot_c_pci_init(void) -{ - unsigned long io_v_base; - uint32_t enable; - - enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE); - - /* - * We require at least one enabled I/O or PCI memory window or we - * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3. - */ - if (enable & (0x01 << 9) || enable & (0x01 << 10)) - mv64340_pci0_init(); - - if (enable & (0x01 << 14) || enable & (0x01 << 15)) - mv64340_pci1_init(); - - if (mv_io_size) { - io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size); - if (!io_v_base) - panic("Could not ioremap I/O port range"); - - set_io_port_base(io_v_base); - } - - return 0; -} - -arch_initcall(ocelot_c_pci_init); diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 75c1246ced5..c1ac6493155 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -84,7 +84,7 @@ static inline void WRITECFG32(u32 addr, u32 data) *(u32 *) (cfg_space + (addr & ~3)) = data; } -int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return dev->irq; } diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c index d43f56e2cd7..c839436bd01 100644 --- a/arch/mips/philips/pnx8550/common/platform.c +++ b/arch/mips/philips/pnx8550/common/platform.c @@ -123,7 +123,7 @@ static struct platform_device *pnx8550_platform_devices[] __initdata = { &pnx8550_uart_device, }; -int pnx8550_platform_init(void) +static int __init pnx8550_platform_init(void) { return platform_add_devices(pnx8550_platform_devices, ARRAY_SIZE(pnx8550_platform_devices)); diff --git a/arch/mips/philips/pnx8550/common/proc.c b/arch/mips/philips/pnx8550/common/proc.c index 3f097558ef1..92311e95b70 100644 --- a/arch/mips/philips/pnx8550/common/proc.c +++ b/arch/mips/philips/pnx8550/common/proc.c @@ -78,29 +78,33 @@ static int pnx8550_proc_init( void ) { // Create /proc/pnx8550 - pnx8550_dir = create_proc_entry("pnx8550", S_IFDIR|S_IRUGO, NULL); + pnx8550_dir = proc_mkdir("pnx8550", NULL); if (!pnx8550_dir) { printk(KERN_ERR "Can't create pnx8550 proc dir\n"); return -1; } // Create /proc/pnx8550/timers - pnx8550_timers = create_proc_entry("timers", S_IFREG|S_IRUGO, pnx8550_dir ); - if (pnx8550_timers){ - pnx8550_timers->read_proc = pnx8550_timers_read; - } - else { + pnx8550_timers = create_proc_read_entry( + "timers", + 0, + pnx8550_dir, + pnx8550_timers_read, + NULL); + + if (!pnx8550_timers) printk(KERN_ERR "Can't create pnx8550 timers proc file\n"); - } // Create /proc/pnx8550/registers - pnx8550_registers = create_proc_entry("registers", S_IFREG|S_IRUGO, pnx8550_dir ); - if (pnx8550_registers){ - pnx8550_registers->read_proc = pnx8550_registers_read; - } - else { + pnx8550_registers = create_proc_read_entry( + "registers", + 0, + pnx8550_dir, + pnx8550_registers_read, + NULL); + + if (!pnx8550_registers) printk(KERN_ERR "Can't create pnx8550 registers proc file\n"); - } return 0; } diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig index 24d514c9dff..abbd0bbfabd 100644 --- a/arch/mips/pmc-sierra/Kconfig +++ b/arch/mips/pmc-sierra/Kconfig @@ -1,3 +1,49 @@ +choice + prompt "PMC-Sierra MSP SOC type" + depends on PMC_MSP + +config PMC_MSP4200_EVAL + bool "PMC-Sierra MSP4200 Eval Board" + select IRQ_MSP_SLP + select HW_HAS_PCI + +config PMC_MSP4200_GW + bool "PMC-Sierra MSP4200 VoIP Gateway" + select IRQ_MSP_SLP + select HW_HAS_PCI + +config PMC_MSP7120_EVAL + bool "PMC-Sierra MSP7120 Eval Board" + select SYS_SUPPORTS_MULTITHREADING + select IRQ_MSP_CIC + select HW_HAS_PCI + +config PMC_MSP7120_GW + bool "PMC-Sierra MSP7120 Residential Gateway" + select SYS_SUPPORTS_MULTITHREADING + select IRQ_MSP_CIC + select HW_HAS_PCI + +config PMC_MSP7120_FPGA + bool "PMC-Sierra MSP7120 FPGA" + select SYS_SUPPORTS_MULTITHREADING + select IRQ_MSP_CIC + select HW_HAS_PCI + +endchoice + +menu "Options for PMC-Sierra MSP chipsets" + depends on PMC_MSP + +config PMC_MSP_EMBEDDED_ROOTFS + bool "Root filesystem embedded in kernel image" + select MTD + select MTD_BLOCK + select MTD_PMC_MSP_RAMROOT + select MTD_RAM + +endmenu + config HYPERTRANSPORT bool "Hypertransport Support for PMC-Sierra Yosemite" depends on PMC_YOSEMITE diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile new file mode 100644 index 00000000000..4bba79c1cc7 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the PMC-Sierra MSP SOCs +# +obj-y += msp_prom.o msp_setup.o msp_irq.o \ + msp_time.o msp_serial.o msp_elb.o +obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o +obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o +obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o +obj-$(CONFIG_PCI) += msp_pci.o +obj-$(CONFIG_MSPETH) += msp_eth.o +obj-$(CONFIG_USB_MSP71XX) += msp_usb.o diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/pmc-sierra/msp71xx/msp_elb.c index f0f5581dcb5..3e964100721 100644 --- a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h +++ b/arch/mips/pmc-sierra/msp71xx/msp_elb.c @@ -1,7 +1,9 @@ /* - * Ocelot-C Board Register Definitions + * Sets up the proper Chip Select configuration registers. It is assumed that + * PMON sets up the ADDR and MASK registers properly. * - * (C) 2002 Momentum Computer Inc. + * Copyright 2005-2006 PMC-Sierra, Inc. + * Author: Marc St-Jean, Marc_St-Jean@pmc-sierra.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -22,40 +24,23 @@ * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] */ -#ifndef __OCELOT_C_FPGA_H__ -#define __OCELOT_C_FPGA_H__ - +#include <linux/kernel.h> +#include <linux/init.h> +#include <msp_regs.h> -#ifdef CONFIG_64BIT -#define OCELOT_C_CS0_ADDR (0xfffffffffc000000) -#else -#define OCELOT_C_CS0_ADDR (0xfc000000) +static int __init msp_elb_setup(void) +{ +#if defined(CONFIG_PMC_MSP7120_GW) \ + || defined(CONFIG_PMC_MSP7120_EVAL) + /* + * Force all CNFG to be identical and equal to CS0, + * according to OPS doc + */ + *CS1_CNFG_REG = *CS2_CNFG_REG = *CS3_CNFG_REG = *CS0_CNFG_REG; #endif + return 0; +} -#define OCELOT_C_REG_BOARDREV 0x0 -#define OCELOT_C_REG_FPGA_REV 0x1 -#define OCELOT_C_REG_FPGA_TYPE 0x2 -#define OCELOT_C_REG_RESET_STATUS 0x3 -#define OCELOT_C_REG_BOARD_STATUS 0x4 -#define OCELOT_C_REG_CPCI_ID 0x5 -#define OCELOT_C_REG_SET 0x6 -#define OCELOT_C_REG_CLR 0x7 -#define OCELOT_C_REG_EEPROM_MODE 0x9 -#define OCELOT_C_REG_INTMASK 0xa -#define OCELOT_C_REG_INTSTAT 0xb -#define OCELOT_C_REG_UART_INTMASK 0xc -#define OCELOT_C_REG_UART_INTSTAT 0xd -#define OCELOT_C_REG_INTSET 0xe -#define OCELOT_C_REG_INTCLR 0xf - -#define __FPGA_REG_TO_ADDR(reg) \ - ((void *) OCELOT_C_CS0_ADDR + OCELOT_C_REG_##reg) -#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg)) -#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg)) - -#endif +subsys_initcall(msp_elb_setup); diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c new file mode 100644 index 00000000000..6fa85728158 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c @@ -0,0 +1,179 @@ +/* + * Sets up interrupt handlers for various hardware switches which are + * connected to interrupt lines. + * + * Copyright 2005-2207 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <msp_int.h> +#include <msp_regs.h> +#include <msp_regops.h> +#ifdef CONFIG_PMCTWILED +#include <msp_led_macros.h> +#endif + +/* For hwbutton_interrupt->initial_state */ +#define HWBUTTON_HI 0x1 +#define HWBUTTON_LO 0x2 + +/* + * This struct describes a hardware button + */ +struct hwbutton_interrupt { + char *name; /* Name of button */ + int irq; /* Actual LINUX IRQ */ + int eirq; /* Extended IRQ number (0-7) */ + int initial_state; /* The "normal" state of the switch */ + void (*handle_hi)(void *); /* Handler: switch input has gone HI */ + void (*handle_lo)(void *); /* Handler: switch input has gone LO */ + void *data; /* Optional data to pass to handler */ +}; + +#ifdef CONFIG_PMC_MSP7120_GW +extern void msp_restart(char *); + +static void softreset_push(void *data) +{ + printk(KERN_WARNING "SOFTRESET switch was pushed\n"); + + /* + * In the future you could move this to the release handler, + * timing the difference between the 'push' and 'release', and only + * doing this ungraceful restart if the button has been down for + * a certain amount of time; otherwise doing a graceful restart. + */ + + msp_restart(NULL); +} + +static void softreset_release(void *data) +{ + printk(KERN_WARNING "SOFTRESET switch was released\n"); + + /* Do nothing */ +} + +static void standby_on(void *data) +{ + printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n"); + + /* TODO: Put board in standby mode */ +#ifdef CONFIG_PMCTWILED + msp_led_turn_off(MSP_LED_PWRSTANDBY_GREEN); + msp_led_turn_on(MSP_LED_PWRSTANDBY_RED); +#endif +} + +static void standby_off(void *data) +{ + printk(KERN_WARNING + "STANDBY switch was set to OFF (not implemented)\n"); + + /* TODO: Take out of standby mode */ +#ifdef CONFIG_PMCTWILED + msp_led_turn_on(MSP_LED_PWRSTANDBY_GREEN); + msp_led_turn_off(MSP_LED_PWRSTANDBY_RED); +#endif +} + +static struct hwbutton_interrupt softreset_sw = { + .name = "Softreset button", + .irq = MSP_INT_EXT0, + .eirq = 0, + .initial_state = HWBUTTON_HI, + .handle_hi = softreset_release, + .handle_lo = softreset_push, + .data = NULL, +}; + +static struct hwbutton_interrupt standby_sw = { + .name = "Standby switch", + .irq = MSP_INT_EXT1, + .eirq = 1, + .initial_state = HWBUTTON_HI, + .handle_hi = standby_off, + .handle_lo = standby_on, + .data = NULL, +}; +#endif /* CONFIG_PMC_MSP7120_GW */ + +static irqreturn_t hwbutton_handler(int irq, void *data) +{ + struct hwbutton_interrupt *hirq = data; + unsigned long cic_ext = *CIC_EXT_CFG_REG; + + if (irq != hirq->irq) + return IRQ_NONE; + + if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) { + /* Interrupt: pin is now HI */ + CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq); + hirq->handle_hi(hirq->data); + } else { + /* Interrupt: pin is now LO */ + CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq); + hirq->handle_lo(hirq->data); + } + + /* + * Invert the POLARITY of this level interrupt to ack the interrupt + * Thus next state change will invoke the opposite message + */ + *CIC_EXT_CFG_REG = cic_ext; + + return IRQ_HANDLED; +} + +static int msp_hwbutton_register(struct hwbutton_interrupt *hirq) +{ + unsigned long cic_ext; + + if (hirq->handle_hi == NULL || hirq->handle_lo == NULL) + return -EINVAL; + + cic_ext = *CIC_EXT_CFG_REG; + CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq); + if (hirq->initial_state == HWBUTTON_HI) + CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq); + else + CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq); + *CIC_EXT_CFG_REG = cic_ext; + + return request_irq(hirq->irq, hwbutton_handler, SA_INTERRUPT, + hirq->name, (void *)hirq); +} + +static int __init msp_hwbutton_setup(void) +{ +#ifdef CONFIG_PMC_MSP7120_GW + msp_hwbutton_register(&softreset_sw); + msp_hwbutton_register(&standby_sw); +#endif + return 0; +} + +subsys_initcall(msp_hwbutton_setup); diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq.c b/arch/mips/pmc-sierra/msp71xx/msp_irq.c new file mode 100644 index 00000000000..734d598a2e3 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq.c @@ -0,0 +1,124 @@ +/* + * IRQ vector handles + * + * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/time.h> + +#include <asm/irq_cpu.h> + +#include <msp_int.h> + +extern void msp_int_handle(void); + +/* SLP bases systems */ +extern void msp_slp_irq_init(void); +extern void msp_slp_irq_dispatch(void); + +/* CIC based systems */ +extern void msp_cic_irq_init(void); +extern void msp_cic_irq_dispatch(void); + +/* + * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded + * hierarchical system. The first level are the direct MIPS interrupts + * and are assigned the interrupt range 0-7. The second level is the SLM + * interrupt controller and is assigned the range 8-39. The third level + * comprises the Peripherial block, the PCI block, the PCI MSI block and + * the SLP. The PCI interrupts and the SLP errors are handled by the + * relevant subsystems so the core interrupt code needs only concern + * itself with the Peripheral block. These are assigned interrupts in + * the range 40-71. + */ + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + u32 pending; + + pending = read_c0_status() & read_c0_cause(); + + /* + * jump to the correct interrupt routine + * These are arranged in priority order and the timer + * comes first! + */ + +#ifdef CONFIG_IRQ_MSP_CIC /* break out the CIC stuff for now */ + if (pending & C_IRQ4) /* do the peripherals first, that's the timer */ + msp_cic_irq_dispatch(); + + else if (pending & C_IRQ0) + do_IRQ(MSP_INT_MAC0); + + else if (pending & C_IRQ1) + do_IRQ(MSP_INT_MAC1); + + else if (pending & C_IRQ2) + do_IRQ(MSP_INT_USB); + + else if (pending & C_IRQ3) + do_IRQ(MSP_INT_SAR); + + else if (pending & C_IRQ5) + do_IRQ(MSP_INT_SEC); + +#else + if (pending & C_IRQ5) + do_IRQ(MSP_INT_TIMER); + + else if (pending & C_IRQ0) + do_IRQ(MSP_INT_MAC0); + + else if (pending & C_IRQ1) + do_IRQ(MSP_INT_MAC1); + + else if (pending & C_IRQ3) + do_IRQ(MSP_INT_VE); + + else if (pending & C_IRQ4) + msp_slp_irq_dispatch(); +#endif + + else if (pending & C_SW0) /* do software after hardware */ + do_IRQ(MSP_INT_SW0); + + else if (pending & C_SW1) + do_IRQ(MSP_INT_SW1); +} + +static struct irqaction cascade_msp = { + .handler = no_action, + .name = "MSP cascade" +}; + + +void __init arch_init_irq(void) +{ + /* initialize the 1st-level CPU based interrupt controller */ + mips_cpu_irq_init(); + +#ifdef CONFIG_IRQ_MSP_CIC + msp_cic_irq_init(); + + /* setup the cascaded interrupts */ + setup_irq(MSP_INT_CIC, &cascade_msp); + setup_irq(MSP_INT_PER, &cascade_msp); +#else + /* setup the 2nd-level SLP register based interrupt controller */ + msp_slp_irq_init(); + + /* setup the cascaded SLP/PER interrupts */ + setup_irq(MSP_INT_SLP, &cascade_msp); + setup_irq(MSP_INT_PER, &cascade_msp); +#endif +} diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c new file mode 100644 index 00000000000..5175357d0a2 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c @@ -0,0 +1,134 @@ +/* + * This file define the irq handler for MSP SLM subsystem interrupts. + * + * Copyright 2005-2007 PMC-Sierra, Inc, derived from irq_cpu.c + * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/bitops.h> + +#include <asm/system.h> + +#include <msp_cic_int.h> +#include <msp_regs.h> + +/* + * NOTE: We are only enabling support for VPE0 right now. + */ + +static inline void unmask_msp_cic_irq(unsigned int irq) +{ + + /* check for PER interrupt range */ + if (irq < MSP_PER_INTBASE) + *CIC_VPE0_MSK_REG |= (1 << (irq - MSP_CIC_INTBASE)); + else + *PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE)); +} + +static inline void mask_msp_cic_irq(unsigned int irq) +{ + /* check for PER interrupt range */ + if (irq < MSP_PER_INTBASE) + *CIC_VPE0_MSK_REG &= ~(1 << (irq - MSP_CIC_INTBASE)); + else + *PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE)); +} + +/* + * While we ack the interrupt interrupts are disabled and thus we don't need + * to deal with concurrency issues. Same for msp_cic_irq_end. + */ +static inline void ack_msp_cic_irq(unsigned int irq) +{ + mask_msp_cic_irq(irq); + + /* + * only really necessary for 18, 16-14 and sometimes 3:0 (since + * these can be edge sensitive) but it doesn't hurt for the others. + */ + + /* check for PER interrupt range */ + if (irq < MSP_PER_INTBASE) + *CIC_STS_REG = (1 << (irq - MSP_CIC_INTBASE)); + else + *PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE)); +} + +static struct irq_chip msp_cic_irq_controller = { + .name = "MSP_CIC", + .ack = ack_msp_cic_irq, + .mask = ack_msp_cic_irq, + .mask_ack = ack_msp_cic_irq, + .unmask = unmask_msp_cic_irq, +}; + + +void __init msp_cic_irq_init(void) +{ + int i; + + /* Mask/clear interrupts. */ + *CIC_VPE0_MSK_REG = 0x00000000; + *PER_INT_MSK_REG = 0x00000000; + *CIC_STS_REG = 0xFFFFFFFF; + *PER_INT_STS_REG = 0xFFFFFFFF; + +#if defined(CONFIG_PMC_MSP7120_GW) || \ + defined(CONFIG_PMC_MSP7120_EVAL) + /* + * The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI. + * These inputs map to EXT_INT_POL[6:4] inside the CIC. + * They are to be active low, level sensitive. + */ + *CIC_EXT_CFG_REG &= 0xFFFF8F8F; +#endif + + /* initialize all the IRQ descriptors */ + for (i = MSP_CIC_INTBASE; i < MSP_PER_INTBASE + 32; i++) + set_irq_chip_and_handler(i, &msp_cic_irq_controller, + handle_level_irq); +} + +void msp_cic_irq_dispatch(void) +{ + u32 pending; + int intbase; + + intbase = MSP_CIC_INTBASE; + pending = *CIC_STS_REG & *CIC_VPE0_MSK_REG; + + /* check for PER interrupt */ + if (pending == (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) { + intbase = MSP_PER_INTBASE; + pending = *PER_INT_STS_REG & *PER_INT_MSK_REG; + } + + /* check for spurious interrupt */ + if (pending == 0x00000000) { + printk(KERN_ERR + "Spurious %s interrupt? status %08x, mask %08x\n", + (intbase == MSP_CIC_INTBASE) ? "CIC" : "PER", + (intbase == MSP_CIC_INTBASE) ? + *CIC_STS_REG : *PER_INT_STS_REG, + (intbase == MSP_CIC_INTBASE) ? + *CIC_VPE0_MSK_REG : *PER_INT_MSK_REG); + return; + } + + /* check for the timer and dispatch it first */ + if ((intbase == MSP_CIC_INTBASE) && + (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE)))) + do_IRQ(MSP_INT_VPE0_TIMER); + else + do_IRQ(ffs(pending) + intbase - 1); +} + diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c new file mode 100644 index 00000000000..f5f1b8d2bb9 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c @@ -0,0 +1,109 @@ +/* + * This file define the irq handler for MSP SLM subsystem interrupts. + * + * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c + * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/bitops.h> + +#include <asm/mipsregs.h> +#include <asm/system.h> + +#include <msp_slp_int.h> +#include <msp_regs.h> + +static inline void unmask_msp_slp_irq(unsigned int irq) +{ + /* check for PER interrupt range */ + if (irq < MSP_PER_INTBASE) + *SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE)); + else + *PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE)); +} + +static inline void mask_msp_slp_irq(unsigned int irq) +{ + /* check for PER interrupt range */ + if (irq < MSP_PER_INTBASE) + *SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE)); + else + *PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE)); +} + +/* + * While we ack the interrupt interrupts are disabled and thus we don't need + * to deal with concurrency issues. Same for msp_slp_irq_end. + */ +static inline void ack_msp_slp_irq(unsigned int irq) +{ + mask_slp_irq(irq); + + /* + * only really necessary for 18, 16-14 and sometimes 3:0 (since + * these can be edge sensitive) but it doesn't hurt for the others. + */ + + /* check for PER interrupt range */ + if (irq < MSP_PER_INTBASE) + *SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE)); + else + *PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE)); +} + +static struct irq_chip msp_slp_irq_controller = { + .name = "MSP_SLP", + .ack = ack_msp_slp_irq, + .mask = ack_msp_slp_irq, + .mask_ack = ack_msp_slp_irq, + .unmask = unmask_msp_slp_irq, +}; + +void __init msp_slp_irq_init(void) +{ + int i; + + /* Mask/clear interrupts. */ + *SLP_INT_MSK_REG = 0x00000000; + *PER_INT_MSK_REG = 0x00000000; + *SLP_INT_STS_REG = 0xFFFFFFFF; + *PER_INT_STS_REG = 0xFFFFFFFF; + + /* initialize all the IRQ descriptors */ + for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++) + set_irq_chip_and_handler(i, &msp_slp_irq_controller + handle_level_irq); +} + +void msp_slp_irq_dispatch(void) +{ + u32 pending; + int intbase; + + intbase = MSP_SLP_INTBASE; + pending = *SLP_INT_STS_REG & *SLP_INT_MSK_REG; + + /* check for PER interrupt */ + if (pending == (1 << (MSP_INT_PER - MSP_SLP_INTBASE))) { + intbase = MSP_PER_INTBASE; + pending = *PER_INT_STS_REG & *PER_INT_MSK_REG; + } + + /* check for spurious interrupt */ + if (pending == 0x00000000) { + printk(KERN_ERR "Spurious %s interrupt?\n", + (intbase == MSP_SLP_INTBASE) ? "SLP" : "PER"); + return; + } + + /* dispatch the irq */ + do_IRQ(ffs(pending) + intbase - 1); +} diff --git a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h b/arch/mips/pmc-sierra/msp71xx/msp_pci.c index 5710a9029f1..f764fe7748d 100644 --- a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h +++ b/arch/mips/pmc-sierra/msp71xx/msp_pci.c @@ -1,7 +1,7 @@ /* - * Ocelot-3 Board Register Definitions + * The setup file for PCI related hardware on PMC-Sierra MSP processors. * - * (C) 2002 Momentum Computer Inc. + * Copyright 2005-2006 PMC-Sierra, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -22,38 +22,29 @@ * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com */ -#ifndef __OCELOT_3_FPGA_H__ -#define __OCELOT_3_FPGA_H__ - -#define OCELOT_3_REG_BOARDREV 0x0 -#define OCELOT_3_REG_FPGA_REV 0x1 -#define OCELOT_3_REG_FPGA_TYPE 0x2 -#define OCELOT_3_REG_RESET_STATUS 0x3 -#define OCELOT_3_REG_BOARD_STATUS 0x4 -#define OCELOT_3_REG_CPCI_ID 0x5 -#define OCELOT_3_REG_SET 0x6 -#define OCELOT_3_REG_CLR 0x7 -#define OCELOT_3_REG_EEPROM_MODE 0x9 -#define OCELOT_3_REG_INTMASK 0xa -#define OCELOT_3_REG_INTSTAT 0xb -#define OCELOT_3_REG_UART_INTMASK 0xc -#define OCELOT_3_REG_UART_INTSTAT 0xd -#define OCELOT_3_REG_INTSET 0xe -#define OCELOT_3_REG_INTCLR 0xf - -extern unsigned long ocelot_fpga_base; - -#define __FPGA_REG_TO_ADDR(reg) \ - ((void *) ocelot_fpga_base + OCELOT_3_REG_##reg) -#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg)) -#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg)) +#include <linux/init.h> + +#include <msp_prom.h> +#include <msp_regs.h> + +extern void msp_pci_init(void); +static int __init msp_pci_setup(void) +{ +#if 0 /* Linux 2.6 initialization code to be completed */ + if (getdeviceid() & DEV_ID_SINGLE_PC) { + /* If single card mode */ + slmRegs *sreg = (slmRegs *) SREG_BASE; + + sreg->single_pc_enable = SINGLE_PCCARD; + } #endif + + msp_pci_init(); + + return 0; +} + +subsys_initcall(msp_pci_setup); diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c new file mode 100644 index 00000000000..e5bd5481d8d --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c @@ -0,0 +1,566 @@ +/* + * BRIEF MODULE DESCRIPTION + * PROM library initialisation code, assuming a version of + * pmon is the boot code. + * + * Copyright 2000,2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * This file was derived from Carsten Langgaard's + * arch/mips/mips-boards/xx files. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#ifdef CONFIG_CRAMFS +#include <linux/cramfs_fs.h> +#endif +#ifdef CONFIG_SQUASHFS +#include <linux/squashfs_fs.h> +#endif + +#include <asm/addrspace.h> +#include <asm/bootinfo.h> +#include <asm-generic/sections.h> +#include <asm/page.h> + +#include <msp_prom.h> +#include <msp_regs.h> + +/* global PROM environment variables and pointers */ +int prom_argc; +char **prom_argv, **prom_envp; +int *prom_vec; + +/* debug flag */ +int init_debug = 1; + +/* memory blocks */ +struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; + +/* default feature sets */ +static char msp_default_features[] = +#if defined(CONFIG_PMC_MSP4200_EVAL) \ + || defined(CONFIG_PMC_MSP4200_GW) + "ERER"; +#elif defined(CONFIG_PMC_MSP7120_EVAL) \ + || defined(CONFIG_PMC_MSP7120_GW) + "EMEMSP"; +#elif defined(CONFIG_PMC_MSP7120_FPGA) + "EMEM"; +#endif + +/* conversion functions */ +static inline unsigned char str2hexnum(unsigned char c) +{ + if (c >= '0' && c <= '9') + return c - '0'; + if (c >= 'a' && c <= 'f') + return c - 'a' + 10; + return 0; /* foo */ +} + +static inline int str2eaddr(unsigned char *ea, unsigned char *str) +{ + int index = 0; + unsigned char num = 0; + + while (*str != '\0') { + if ((*str == '.') || (*str == ':')) { + ea[index++] = num; + num = 0; + str++; + } else { + num = num << 4; + num |= str2hexnum(*str++); + } + } + + if (index == 5) { + ea[index++] = num; + return 0; + } else + return -1; +} +EXPORT_SYMBOL(str2eaddr); + +static inline unsigned long str2hex(unsigned char *str) +{ + int value = 0; + + while (*str) { + value = value << 4; + value |= str2hexnum(*str++); + } + + return value; +} + +/* function to query the system information */ +const char *get_system_type(void) +{ +#if defined(CONFIG_PMC_MSP4200_EVAL) + return "PMC-Sierra MSP4200 Eval Board"; +#elif defined(CONFIG_PMC_MSP4200_GW) + return "PMC-Sierra MSP4200 VoIP Gateway"; +#elif defined(CONFIG_PMC_MSP7120_EVAL) + return "PMC-Sierra MSP7120 Eval Board"; +#elif defined(CONFIG_PMC_MSP7120_GW) + return "PMC-Sierra MSP7120 Residential Gateway"; +#elif defined(CONFIG_PMC_MSP7120_FPGA) + return "PMC-Sierra MSP7120 FPGA"; +#else + #error "What is the type of *your* MSP?" +#endif +} + +int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr) +{ + char *ethaddr_str; + + ethaddr_str = prom_getenv(ethaddr_name); + if (!ethaddr_str) { + printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name); + return -1; + } + + if (str2eaddr(ethernet_addr, ethaddr_str) == -1) { + printk(KERN_WARNING "%s badly formatted-<%s>\n", + ethaddr_name, ethaddr_str); + return -1; + } + + if (init_debug > 1) { + int i; + printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name); + for (i = 0; i < 5; i++) + printk(KERN_DEBUG "%02x:", + (unsigned char)*(ethernet_addr+i)); + printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i)); + } + + return 0; +} +EXPORT_SYMBOL(get_ethernet_addr); + +static char *get_features(void) +{ + char *feature = prom_getenv(FEATURES); + + if (feature == NULL) { + /* default features based on MACHINE_TYPE */ + feature = msp_default_features; + } + + return feature; +} + +static char test_feature(char c) +{ + char *feature = get_features(); + + while (*feature) { + if (*feature++ == c) + return *feature; + feature++; + } + + return FEATURE_NOEXIST; +} + +unsigned long get_deviceid(void) +{ + char *deviceid = prom_getenv(DEVICEID); + + if (deviceid == NULL) + return *DEV_ID_REG; + else + return str2hex(deviceid); +} + +char identify_pci(void) +{ + return test_feature(PCI_KEY); +} +EXPORT_SYMBOL(identify_pci); + +char identify_pcimux(void) +{ + return test_feature(PCIMUX_KEY); +} + +char identify_sec(void) +{ + return test_feature(SEC_KEY); +} +EXPORT_SYMBOL(identify_sec); + +char identify_spad(void) +{ + return test_feature(SPAD_KEY); +} +EXPORT_SYMBOL(identify_spad); + +char identify_tdm(void) +{ + return test_feature(TDM_KEY); +} +EXPORT_SYMBOL(identify_tdm); + +char identify_zsp(void) +{ + return test_feature(ZSP_KEY); +} +EXPORT_SYMBOL(identify_zsp); + +static char identify_enetfeature(char key, unsigned long interface_num) +{ + char *feature = get_features(); + + while (*feature) { + if (*feature++ == key && interface_num-- == 0) + return *feature; + feature++; + } + + return FEATURE_NOEXIST; +} + +char identify_enet(unsigned long interface_num) +{ + return identify_enetfeature(ENET_KEY, interface_num); +} +EXPORT_SYMBOL(identify_enet); + +char identify_enetTxD(unsigned long interface_num) +{ + return identify_enetfeature(ENETTXD_KEY, interface_num); +} +EXPORT_SYMBOL(identify_enetTxD); + +unsigned long identify_family(void) +{ + unsigned long deviceid; + + deviceid = get_deviceid(); + + return deviceid & CPU_DEVID_FAMILY; +} +EXPORT_SYMBOL(identify_family); + +unsigned long identify_revision(void) +{ + unsigned long deviceid; + + deviceid = get_deviceid(); + + return deviceid & CPU_DEVID_REVISION; +} +EXPORT_SYMBOL(identify_revision); + +/* PROM environment functions */ +char *prom_getenv(char *env_name) +{ + /* + * Return a pointer to the given environment variable. prom_envp + * points to a null terminated array of pointers to variables. + * Environment variables are stored in the form of "memsize=64" + */ + + char **var = prom_envp; + int i = strlen(env_name); + + while (*var) { + if (strncmp(env_name, *var, i) == 0) { + return (*var + strlen(env_name) + 1); + } + var++; + } + + return NULL; +} + +/* PROM commandline functions */ +char *prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} +EXPORT_SYMBOL(prom_getcmdline); + +void __init prom_init_cmdline(void) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while (actr < prom_argc) { + strcpy(cp, prom_argv[actr]); + cp += strlen(prom_argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ + --cp; + *cp = '\0'; +} + +/* memory allocation functions */ +static int __init prom_memtype_classify(unsigned int type) +{ + switch (type) { + case yamon_free: + return BOOT_MEM_RAM; + case yamon_prom: + return BOOT_MEM_ROM_DATA; + default: + return BOOT_MEM_RESERVED; + } +} + +void __init prom_meminit(void) +{ + struct prom_pmemblock *p; + + p = prom_getmdesc(); + + while (p->size) { + long type; + unsigned long base, size; + + type = prom_memtype_classify(p->type); + base = p->base; + size = p->size; + + add_memory_region(base, size, type); + p++; + } +} + +void __init prom_free_prom_memory(void) +{ + int argc; + char **argv; + char **envp; + char *ptr; + int len = 0; + int i; + unsigned long addr; + + /* + * preserve environment variables and command line from pmon/bbload + * first preserve the command line + */ + for (argc = 0; argc < prom_argc; argc++) { + len += sizeof(char *); /* length of pointer */ + len += strlen(prom_argv[argc]) + 1; /* length of string */ + } + len += sizeof(char *); /* plus length of null pointer */ + + argv = kmalloc(len, GFP_KERNEL); + ptr = (char *) &argv[prom_argc + 1]; /* strings follow array */ + + for (argc = 0; argc < prom_argc; argc++) { + argv[argc] = ptr; + strcpy(ptr, prom_argv[argc]); + ptr += strlen(prom_argv[argc]) + 1; + } + argv[prom_argc] = NULL; /* end array with null pointer */ + prom_argv = argv; + + /* next preserve the environment variables */ + len = 0; + i = 0; + for (envp = prom_envp; *envp != NULL; envp++) { + i++; /* count number of environment variables */ + len += sizeof(char *); /* length of pointer */ + len += strlen(*envp) + 1; /* length of string */ + } + len += sizeof(char *); /* plus length of null pointer */ + + envp = kmalloc(len, GFP_KERNEL); + ptr = (char *) &envp[i+1]; + + for (argc = 0; argc < i; argc++) { + envp[argc] = ptr; + strcpy(ptr, prom_envp[argc]); + ptr += strlen(prom_envp[argc]) + 1; + } + envp[i] = NULL; /* end array with null pointer */ + prom_envp = envp; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) + continue; + + addr = boot_mem_map.map[i].addr; + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); + } +} + +struct prom_pmemblock *__init prom_getmdesc(void) +{ + static char memsz_env[] __initdata = "memsize"; + static char heaptop_env[] __initdata = "heaptop"; + char *str; + unsigned int memsize; + unsigned int heaptop; +#ifdef CONFIG_MTD_PMC_MSP_RAMROOT + void *ramroot_start; + unsigned long ramroot_size; +#endif + int i; + + str = prom_getenv(memsz_env); + if (!str) { + ppfinit("memsize not set in boot prom, " + "set to default (32Mb)\n"); + memsize = 0x02000000; + } else { + memsize = simple_strtol(str, NULL, 0); + + if (memsize == 0) { + /* if memsize is a bad size, use reasonable default */ + memsize = 0x02000000; + } + + /* convert to physical address (removing caching bits, etc) */ + memsize = CPHYSADDR(memsize); + } + + str = prom_getenv(heaptop_env); + if (!str) { + heaptop = CPHYSADDR((u32)&_text); + ppfinit("heaptop not set in boot prom, " + "set to default 0x%08x\n", heaptop); + } else { + heaptop = simple_strtol(str, NULL, 16); + if (heaptop == 0) { + /* heaptop conversion bad, might have 0xValue */ + heaptop = simple_strtol(str, NULL, 0); + + if (heaptop == 0) { + /* heaptop still bad, use reasonable default */ + heaptop = CPHYSADDR((u32)&_text); + } + } + + /* convert to physical address (removing caching bits, etc) */ + heaptop = CPHYSADDR((u32)heaptop); + } + + /* the base region */ + i = 0; + mdesc[i].type = BOOT_MEM_RESERVED; + mdesc[i].base = 0x00000000; + mdesc[i].size = PAGE_ALIGN(0x300 + 0x80); + /* jtag interrupt vector + sizeof vector */ + + /* PMON data */ + if (heaptop > mdesc[i].base + mdesc[i].size) { + i++; /* 1 */ + mdesc[i].type = BOOT_MEM_ROM_DATA; + mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size; + mdesc[i].size = heaptop - mdesc[i].base; + } + + /* end of PMON data to start of kernel -- probably zero .. */ + if (heaptop != CPHYSADDR((u32)_text)) { + i++; /* 2 */ + mdesc[i].type = BOOT_MEM_RAM; + mdesc[i].base = heaptop; + mdesc[i].size = CPHYSADDR((u32)_text) - mdesc[i].base; + } + + /* kernel proper */ + i++; /* 3 */ + mdesc[i].type = BOOT_MEM_RESERVED; + mdesc[i].base = CPHYSADDR((u32)_text); +#ifdef CONFIG_MTD_PMC_MSP_RAMROOT + if (get_ramroot(&ramroot_start, &ramroot_size)) { + /* + * Rootfs in RAM -- follows kernel + * Combine rootfs image with kernel block so a + * page (4k) isn't wasted between memory blocks + */ + mdesc[i].size = CPHYSADDR(PAGE_ALIGN( + (u32)ramroot_start + ramroot_size)) - mdesc[i].base; + } else +#endif + mdesc[i].size = CPHYSADDR(PAGE_ALIGN( + (u32)_end)) - mdesc[i].base; + + /* Remainder of RAM -- under memsize */ + i++; /* 5 */ + mdesc[i].type = yamon_free; + mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size; + mdesc[i].size = memsize - mdesc[i].base; + + return &mdesc[0]; +} + +/* rootfs functions */ +#ifdef CONFIG_MTD_PMC_MSP_RAMROOT +bool get_ramroot(void **start, unsigned long *size) +{ + extern char _end[]; + + /* Check for start following the end of the kernel */ + void *check_start = (void *)_end; + + /* Check for supported rootfs types */ +#ifdef CONFIG_CRAMFS + if (*(__u32 *)check_start == CRAMFS_MAGIC) { + /* Get CRAMFS size */ + *start = check_start; + *size = PAGE_ALIGN(((struct cramfs_super *) + check_start)->size); + + return true; + } +#endif +#ifdef CONFIG_SQUASHFS + if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) { + /* Get SQUASHFS size */ + *start = check_start; + *size = PAGE_ALIGN(((struct squashfs_super_block *) + check_start)->bytes_used); + + return true; + } +#endif + + return false; +} +EXPORT_SYMBOL(get_ramroot); +#endif diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c new file mode 100644 index 00000000000..8f69b789be9 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -0,0 +1,256 @@ +/* + * The generic setup file for PMC-Sierra MSP processors + * + * Copyright 2005-2007 PMC-Sierra, Inc, + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <asm/bootinfo.h> +#include <asm/cacheflush.h> +#include <asm/r4kcache.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <msp_prom.h> +#include <msp_regs.h> + +#if defined(CONFIG_PMC_MSP7120_GW) +#include <msp_regops.h> +#include <msp_gpio.h> +#define MSP_BOARD_RESET_GPIO 9 +#endif + +extern void msp_timer_init(void); +extern void msp_serial_setup(void); +extern void pmctwiled_setup(void); + +#if defined(CONFIG_PMC_MSP7120_EVAL) || \ + defined(CONFIG_PMC_MSP7120_GW) || \ + defined(CONFIG_PMC_MSP7120_FPGA) +/* + * Performs the reset for MSP7120-based boards + */ +void msp7120_reset(void) +{ + void *start, *end, *iptr; + register int i; + + /* Diasble all interrupts */ + local_irq_disable(); +#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING + dvpe(); +#endif + + /* Cache the reset code of this function */ + __asm__ __volatile__ ( + " .set push \n" + " .set mips3 \n" + " la %0,startpoint \n" + " la %1,endpoint \n" + " .set pop \n" + : "=r" (start), "=r" (end) + : + ); + + for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1)); + iptr < end; iptr += L1_CACHE_BYTES) + cache_op(Fill, iptr); + + __asm__ __volatile__ ( + "startpoint: \n" + ); + + /* Put the DDRC into self-refresh mode */ + DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16); + + /* + * IMPORTANT! + * DO NOT do anything from here on out that might even + * think about fetching from RAM - i.e., don't call any + * non-inlined functions, and be VERY sure that any inline + * functions you do call do NOT access any sort of RAM + * anywhere! + */ + + /* Wait a bit for the DDRC to settle */ + for (i = 0; i < 100000000; i++); + +#if defined(CONFIG_PMC_MSP7120_GW) + /* + * Set GPIO 9 HI, (tied to board reset logic) + * GPIO 9 is the 4th GPIO of register 3 + * + * NOTE: We cannot use the higher-level msp_gpio_mode()/out() + * as GPIO char driver may not be enabled and it would look up + * data inRAM! + */ + set_value_reg32(GPIO_CFG3_REG, + basic_mode_mask(MSP_BOARD_RESET_GPIO), + basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO)); + set_reg32(GPIO_DATA3_REG, + basic_data_mask(MSP_BOARD_RESET_GPIO)); + + /* + * In case GPIO9 doesn't reset the board (jumper configurable!) + * fallback to device reset below. + */ +#endif + /* Set bit 1 of the MSP7120 reset register */ + *RST_SET_REG = 0x00000001; + + __asm__ __volatile__ ( + "endpoint: \n" + ); +} +#endif + +void msp_restart(char *command) +{ + printk(KERN_WARNING "Now rebooting .......\n"); + +#if defined(CONFIG_PMC_MSP7120_EVAL) || \ + defined(CONFIG_PMC_MSP7120_GW) || \ + defined(CONFIG_PMC_MSP7120_FPGA) + msp7120_reset(); +#else + /* No chip-specific reset code, just jump to the ROM reset vector */ + set_c0_status(ST0_BEV | ST0_ERL); + change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); + flush_cache_all(); + write_c0_wired(0); + + __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); +#endif +} + +void msp_halt(void) +{ + printk(KERN_WARNING "\n** You can safely turn off the power\n"); + while (1) + /* If possible call official function to get CPU WARs */ + if (cpu_wait) + (*cpu_wait)(); + else + __asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0"); +} + +void msp_power_off(void) +{ + msp_halt(); +} + +void __init plat_mem_setup(void) +{ + _machine_restart = msp_restart; + _machine_halt = msp_halt; + pm_power_off = msp_power_off; + + board_time_init = msp_timer_init; +} + +void __init prom_init(void) +{ + unsigned long family; + unsigned long revision; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + /* + * Someday we can use this with PMON2000 to get a + * platform call prom routines for output etc. without + * having to use grody hacks. For now it's unused. + * + * struct callvectors *cv = (struct callvectors *) fw_arg3; + */ + family = identify_family(); + revision = identify_revision(); + + switch (family) { + case FAMILY_FPGA: + if (FPGA_IS_MSP4200(revision)) { + /* Old-style revision ID */ + mips_machgroup = MACH_GROUP_MSP; + mips_machtype = MACH_MSP4200_FPGA; + } else { + mips_machgroup = MACH_GROUP_MSP; + mips_machtype = MACH_MSP_OTHER; + } + break; + + case FAMILY_MSP4200: + mips_machgroup = MACH_GROUP_MSP; +#if defined(CONFIG_PMC_MSP4200_EVAL) + mips_machtype = MACH_MSP4200_EVAL; +#elif defined(CONFIG_PMC_MSP4200_GW) + mips_machtype = MACH_MSP4200_GW; +#else + mips_machtype = MACH_MSP_OTHER; +#endif + break; + + case FAMILY_MSP4200_FPGA: + mips_machgroup = MACH_GROUP_MSP; + mips_machtype = MACH_MSP4200_FPGA; + break; + + case FAMILY_MSP7100: + mips_machgroup = MACH_GROUP_MSP; +#if defined(CONFIG_PMC_MSP7120_EVAL) + mips_machtype = MACH_MSP7120_EVAL; +#elif defined(CONFIG_PMC_MSP7120_GW) + mips_machtype = MACH_MSP7120_GW; +#else + mips_machtype = MACH_MSP_OTHER; +#endif + break; + + case FAMILY_MSP7100_FPGA: + mips_machgroup = MACH_GROUP_MSP; + mips_machtype = MACH_MSP7120_FPGA; + break; + + default: + /* we don't recognize the machine */ + mips_machgroup = MACH_GROUP_UNKNOWN; + mips_machtype = MACH_UNKNOWN; + break; + } + + /* make sure we have the right initialization routine - sanity */ + if (mips_machgroup != MACH_GROUP_MSP) { + ppfinit("Unknown machine group in a " + "MSP initialization routine\n"); + panic("***Bogosity factor five***, exiting\n"); + } + + prom_init_cmdline(); + + prom_meminit(); + + /* + * Sub-system setup follows. + * Setup functions can either be called here or using the + * subsys_initcall mechanism (i.e. see msp_pci_setup). The + * order in which they are called can be changed by using the + * link order in arch/mips/pmc-sierra/msp71xx/Makefile. + * + * NOTE: Please keep sub-system specific initialization code + * in separate specific files. + */ + msp_serial_setup(); + +#ifdef CONFIG_PMCTWILED + /* + * Setup LED states before the subsys_initcall loads other + * dependant drivers/modules. + */ + pmctwiled_setup(); +#endif +} diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c new file mode 100644 index 00000000000..2a2beac5a4f --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c @@ -0,0 +1,94 @@ +/* + * Setting up the clock on MSP SOCs. No RTC typically. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/ptrace.h> + +#include <asm/mipsregs.h> +#include <asm/time.h> + +#include <msp_prom.h> +#include <msp_int.h> +#include <msp_regs.h> + +void __init msp_timer_init(void) +{ + char *endp, *s; + unsigned long cpu_rate = 0; + + if (cpu_rate == 0) { + s = prom_getenv("clkfreqhz"); + cpu_rate = simple_strtoul(s, &endp, 10); + if (endp != NULL && *endp != 0) { + printk(KERN_ERR + "Clock rate in Hz parse error: %s\n", s); + cpu_rate = 0; + } + } + + if (cpu_rate == 0) { + s = prom_getenv("clkfreq"); + cpu_rate = 1000 * simple_strtoul(s, &endp, 10); + if (endp != NULL && *endp != 0) { + printk(KERN_ERR + "Clock rate in MHz parse error: %s\n", s); + cpu_rate = 0; + } + } + + if (cpu_rate == 0) { +#if defined(CONFIG_PMC_MSP7120_EVAL) \ + || defined(CONFIG_PMC_MSP7120_GW) + cpu_rate = 400000000; +#elif defined(CONFIG_PMC_MSP7120_FPGA) + cpu_rate = 25000000; +#else + cpu_rate = 150000000; +#endif + printk(KERN_ERR + "Failed to determine CPU clock rate, " + "assuming %ld hz ...\n", cpu_rate); + } + + printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate); + + /* timer frequency is 1/2 clock rate */ + mips_hpt_frequency = cpu_rate/2; +} + + +void __init plat_timer_setup(struct irqaction *irq) +{ +#ifdef CONFIG_IRQ_MSP_CIC + /* we are using the vpe0 counter for timer interrupts */ + setup_irq(MSP_INT_VPE0_TIMER, irq); +#else + /* we are using the mips counter for timer interrupts */ + setup_irq(MSP_INT_TIMER, irq); +#endif +} diff --git a/arch/mips/pmc-sierra/msp71xx/msp_usb.c b/arch/mips/pmc-sierra/msp71xx/msp_usb.c new file mode 100644 index 00000000000..21f9c70b692 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_usb.c @@ -0,0 +1,150 @@ +/* + * The setup file for USB related hardware on PMC-Sierra MSP processors. + * + * Copyright 2006-2007 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +#include <asm/mipsregs.h> + +#include <msp_regs.h> +#include <msp_int.h> +#include <msp_prom.h> + +#if defined(CONFIG_USB_EHCI_HCD) +static struct resource msp_usbhost_resources [] = { + [0] = { + .start = MSP_USB_BASE_START, + .end = MSP_USB_BASE_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 msp_usbhost_dma_mask = DMA_32BIT_MASK; + +static struct platform_device msp_usbhost_device = { + .name = "pmcmsp-ehci", + .id = 0, + .dev = { + .dma_mask = &msp_usbhost_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE (msp_usbhost_resources), + .resource = msp_usbhost_resources, +}; +#endif /* CONFIG_USB_EHCI_HCD */ + +#if defined(CONFIG_USB_GADGET) +static struct resource msp_usbdev_resources [] = { + [0] = { + .start = MSP_USB_BASE, + .end = MSP_USB_BASE_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 msp_usbdev_dma_mask = DMA_32BIT_MASK; + +static struct platform_device msp_usbdev_device = { + .name = "msp71xx_udc", + .id = 0, + .dev = { + .dma_mask = &msp_usbdev_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE (msp_usbdev_resources), + .resource = msp_usbdev_resources, +}; +#endif /* CONFIG_USB_GADGET */ + +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) +static struct platform_device *msp_devs[1]; +#endif + + +static int __init msp_usb_setup(void) +{ +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) + char *strp; + char envstr[32]; + unsigned int val = 0; + int result = 0; + + /* + * construct environment name usbmode + * set usbmode <host/device> as pmon environment var + */ + snprintf((char *)&envstr[0], sizeof(envstr), "usbmode"); + +#if defined(CONFIG_USB_EHCI_HCD) + /* default to host mode */ + val = 1; +#endif + + /* get environment string */ + strp = prom_getenv((char *)&envstr[0]); + if (strp) { + if (!strcmp(strp, "device")) + val = 0; + } + + if (val) { +#if defined(CONFIG_USB_EHCI_HCD) + /* get host mode device */ + msp_devs[0] = &msp_usbhost_device; + ppfinit("platform add USB HOST done %s.\n", + msp_devs[0]->name); + + result = platform_add_devices(msp_devs, ARRAY_SIZE (msp_devs)); +#endif /* CONFIG_USB_EHCI_HCD */ + } +#if defined(CONFIG_USB_GADGET) + else { + /* get device mode structure */ + msp_devs[0] = &msp_usbdev_device; + ppfinit("platform add USB DEVICE done %s.\n", + msp_devs[0]->name); + + result = platform_add_devices(msp_devs, ARRAY_SIZE (msp_devs)); + } +#endif /* CONFIG_USB_GADGET */ +#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */ + + return result; +} + +subsys_initcall(msp_usb_setup); diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index 305491e74db..d83c4ada14f 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -77,7 +77,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus) * stack so the first thing we do is throw away that stuff and load useful * values into the registers ... */ -void prom_boot_secondary(int cpu, struct task_struct *idle) +void __init prom_boot_secondary(int cpu, struct task_struct *idle) { unsigned long gp = (unsigned long) task_thread_info(idle); unsigned long sp = __KSTK_TOS(idle); diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index 66df5ac8f08..63afd7e4442 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -46,7 +46,7 @@ static struct timer_list power_timer, blink_timer, debounce_timer, volume_timer; static int machine_state; -static void ATTRIB_NORET sgi_machine_power_off(void) +static void __noreturn sgi_machine_power_off(void) { unsigned int tmp; @@ -68,7 +68,7 @@ static void ATTRIB_NORET sgi_machine_power_off(void) } } -static void ATTRIB_NORET sgi_machine_restart(char *command) +static void __noreturn sgi_machine_restart(char *command) { if (machine_state & MACHINE_SHUTTING_DOWN) sgi_machine_power_off(); @@ -76,7 +76,7 @@ static void ATTRIB_NORET sgi_machine_restart(char *command) while (1); } -static void ATTRIB_NORET sgi_machine_halt(void) +static void __noreturn sgi_machine_halt(void) { if (machine_state & MACHINE_SHUTTING_DOWN) sgi_machine_power_off(); diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c index ce907eda221..123141ab21a 100644 --- a/arch/mips/sgi-ip27/ip27-berr.c +++ b/arch/mips/sgi-ip27/ip27-berr.c @@ -21,7 +21,6 @@ #include <asm/traps.h> #include <asm/uaccess.h> -extern void dump_tlb_addr(unsigned long addr); extern void dump_tlb_all(void); static void dump_hub_information(unsigned long errst0, unsigned long errst1) diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c index 120b15932ca..ba3697ee7ff 100644 --- a/arch/mips/sgi-ip32/ip32-platform.c +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -1,5 +1,53 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/serial_8250.h> + +#include <asm/ip32/mace.h> +#include <asm/ip32/ip32_ints.h> + +/* + * .iobase isn't a constant (in the sense of C) so we fill it in at runtime. + */ +#define MACE_PORT(int) \ +{ \ + .irq = int, \ + .uartclk = 1843200, \ + .iotype = UPIO_MEM, \ + .flags = UPF_SKIP_TEST, \ + .regshift = 8, \ +} + +static struct plat_serial8250_port uart8250_data[] = { + MACE_PORT(MACEISA_SERIAL1_IRQ), + MACE_PORT(MACEISA_SERIAL2_IRQ), + { }, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = uart8250_data, + }, +}; + +static int __init uart8250_init(void) +{ + uart8250_data[0].iobase = (unsigned long) &mace->isa.serial1; + uart8250_data[1].iobase = (unsigned long) &mace->isa.serial1; + + return platform_device_register(&uart8250_device); +} + +device_initcall(uart8250_init); static __init int meth_devinit(void) { @@ -18,3 +66,7 @@ static __init int meth_devinit(void) } device_initcall(meth_devinit); + +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2"); diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index 57708fe28bd..bbba066cb40 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -62,12 +62,6 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str) } #endif -#ifdef CONFIG_SERIAL_8250 -#include <linux/tty.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#endif /* CONFIG_SERIAL_8250 */ - /* An arbitrary time; this can be decreased if reliability looks good */ #define WAIT_MS 10 @@ -96,36 +90,6 @@ void __init plat_mem_setup(void) board_time_init = ip32_time_init; -#ifdef CONFIG_SERIAL_8250 - { - static struct uart_port o2_serial[2]; - - memset(o2_serial, 0, sizeof(o2_serial)); - o2_serial[0].type = PORT_16550A; - o2_serial[0].line = 0; - o2_serial[0].irq = MACEISA_SERIAL1_IRQ; - o2_serial[0].flags = UPF_SKIP_TEST; - o2_serial[0].uartclk = 1843200; - o2_serial[0].iotype = UPIO_MEM; - o2_serial[0].membase = (char *)&mace->isa.serial1; - o2_serial[0].fifosize = 14; - /* How much to shift register offset by. Each UART register - * is replicated over 256 byte space */ - o2_serial[0].regshift = 8; - o2_serial[1].type = PORT_16550A; - o2_serial[1].line = 1; - o2_serial[1].irq = MACEISA_SERIAL2_IRQ; - o2_serial[1].flags = UPF_SKIP_TEST; - o2_serial[1].uartclk = 1843200; - o2_serial[1].iotype = UPIO_MEM; - o2_serial[1].membase = (char *)&mace->isa.serial2; - o2_serial[1].fifosize = 14; - o2_serial[1].regshift = 8; - - early_serial_setup(&o2_serial[0]); - early_serial_setup(&o2_serial[1]); - } -#endif #ifdef CONFIG_SGI_O2MACE_ETH { char *mac = ArcGetEnvironmentVariable("eaddr"); diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index ae4a92c3e52..51898dd1304 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -62,7 +62,7 @@ extern unsigned long initrd_start, initrd_end; extern int kgdb_port; #endif -static void ATTRIB_NORET cfe_linux_exit(void *arg) +static void __noreturn cfe_linux_exit(void *arg) { int warm = *(int *)arg; @@ -83,14 +83,14 @@ static void ATTRIB_NORET cfe_linux_exit(void *arg) while (1); } -static void ATTRIB_NORET cfe_linux_restart(char *command) +static void __noreturn cfe_linux_restart(char *command) { static const int zero; cfe_linux_exit((void *)&zero); } -static void ATTRIB_NORET cfe_linux_halt(void) +static void __noreturn cfe_linux_halt(void) { static const int one = 1; diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile index e5777b7e2bc..471418e4f44 100644 --- a/arch/mips/sni/Makefile +++ b/arch/mips/sni/Makefile @@ -2,5 +2,5 @@ # Makefile for the SNI specific part of the kernel # -obj-y += irq.o reset.o setup.o ds1216.o a20r.o rm200.o pcimt.o pcit.o time.o +obj-y += irq.o reset.o setup.o a20r.o rm200.o pcimt.o pcit.o time.o obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index 31ab80f1bef..6850a29defc 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -15,7 +15,6 @@ #include <asm/sni.h> #include <asm/time.h> -#include <asm/ds1216.h> #define PORT(_base,_irq) \ { \ @@ -40,20 +39,34 @@ static struct platform_device a20r_serial8250_device = { }, }; +static struct resource a20r_ds1216_rsrc[] = { + { + .start = 0x1c081ffc, + .end = 0x1c081fff, + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device a20r_ds1216_device = { + .name = "rtc-ds1216", + .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc), + .resource = a20r_ds1216_rsrc +}; + static struct resource snirm_82596_rsrc[] = { { - .start = 0xb8000000, - .end = 0xb8000004, + .start = 0x18000000, + .end = 0x18000004, .flags = IORESOURCE_MEM }, { - .start = 0xb8010000, - .end = 0xb8010004, + .start = 0x18010000, + .end = 0x18010004, .flags = IORESOURCE_MEM }, { - .start = 0xbff00000, - .end = 0xbff00020, + .start = 0x1ff00000, + .end = 0x1ff00020, .flags = IORESOURCE_MEM }, { @@ -205,8 +218,7 @@ void __init sni_a20r_irq_init(void) void sni_a20r_init(void) { - ds1216_base = (volatile unsigned char *) SNI_DS1216_A20R_BASE; - rtc_mips_get_time = ds1216_get_cmos_time; + /* FIXME, remove if not needed */ } static int __init snirm_a20r_setup_devinit(void) @@ -218,6 +230,7 @@ static int __init snirm_a20r_setup_devinit(void) platform_device_register(&snirm_53c710_pdev); platform_device_register(&sc26xx_pdev); platform_device_register(&a20r_serial8250_device); + platform_device_register(&a20r_ds1216_device); break; } diff --git a/arch/mips/sni/ds1216.c b/arch/mips/sni/ds1216.c deleted file mode 100644 index 1d92732c14f..00000000000 --- a/arch/mips/sni/ds1216.c +++ /dev/null @@ -1,81 +0,0 @@ - -#include <linux/bcd.h> -#include <linux/time.h> - -#include <asm/ds1216.h> - -volatile unsigned char *ds1216_base; - -/* - * Read the 64 bit we'd like to have - It a series - * of 64 bits showing up in the LSB of the base register. - * - */ -static unsigned char *ds1216_read(void) -{ - static unsigned char rdbuf[8]; - unsigned char c; - int i, j; - - for (i = 0; i < 8; i++) { - c = 0x0; - for (j = 0; j < 8; j++) { - c |= (*ds1216_base & 0x1) << j; - } - rdbuf[i] = c; - } - - return rdbuf; -} - -static void ds1216_switch_ds_to_clock(void) -{ - unsigned char magic[] = { - 0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c - }; - int i,j,c; - - /* Reset magic pointer */ - c = *ds1216_base; - - /* Write 64 bit magic to DS1216 */ - for (i = 0; i < 8; i++) { - c = magic[i]; - for (j = 0; j < 8; j++) { - *ds1216_base = c; - c = c >> 1; - } - } -} - -unsigned long ds1216_get_cmos_time(void) -{ - unsigned char *rdbuf; - unsigned int year, month, date, hour, min, sec; - - ds1216_switch_ds_to_clock(); - rdbuf = ds1216_read(); - - sec = BCD2BIN(DS1216_SEC(rdbuf)); - min = BCD2BIN(DS1216_MIN(rdbuf)); - hour = BCD2BIN(DS1216_HOUR(rdbuf)); - date = BCD2BIN(DS1216_DATE(rdbuf)); - month = BCD2BIN(DS1216_MONTH(rdbuf)); - year = BCD2BIN(DS1216_YEAR(rdbuf)); - - if (DS1216_1224(rdbuf) && DS1216_AMPM(rdbuf)) - hour+=12; - - if (year < 70) - year += 2000; - else - year += 1900; - - return mktime(year, month, date, hour, min, sec); -} - -int ds1216_set_rtc_mmss(unsigned long nowtime) -{ - printk("ds1216_set_rtc_mmss called but not implemented\n"); - return -1; -} diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 97b234361b4..44b1ae62aa4 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -14,7 +14,6 @@ #include <linux/pci.h> #include <linux/serial_8250.h> -#include <asm/mc146818-time.h> #include <asm/sni.h> #include <asm/time.h> #include <asm/i8259.h> @@ -90,6 +89,26 @@ static struct platform_device pcimt_serial8250_device = { }, }; +static struct resource pcimt_cmos_rsrc[] = { + { + .start = 0x70, + .end = 0x71, + .flags = IORESOURCE_IO + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device pcimt_cmos_device = { + .name = "rtc_cmos", + .num_resources = ARRAY_SIZE(pcimt_cmos_rsrc), + .resource = pcimt_cmos_rsrc +}; + + static struct resource sni_io_resource = { .start = 0x00000000UL, .end = 0x03bfffffUL, @@ -290,12 +309,10 @@ void __init sni_pcimt_irq_init(void) change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3); } -void sni_pcimt_init(void) +void __init sni_pcimt_init(void) { sni_pcimt_detect(); sni_pcimt_sc_init(); - rtc_mips_get_time = mc146818_get_cmos_time; - rtc_mips_set_time = mc146818_set_rtc_mmss; board_time_init = sni_cpu_time_init; ioport_resource.end = sni_io_resource.end; #ifdef CONFIG_PCI @@ -312,6 +329,7 @@ static int __init snirm_pcimt_setup_devinit(void) case SNI_BRD_PCI_DESKTOP: case SNI_BRD_PCI_MTOWER_CPLUS: platform_device_register(&pcimt_serial8250_device); + platform_device_register(&pcimt_cmos_device); break; } diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c index 00d151f4d12..2480c478dcb 100644 --- a/arch/mips/sni/pcit.c +++ b/arch/mips/sni/pcit.c @@ -13,7 +13,6 @@ #include <linux/pci.h> #include <linux/serial_8250.h> -#include <asm/mc146818-time.h> #include <asm/sni.h> #include <asm/time.h> #include <asm/irq_cpu.h> @@ -58,6 +57,25 @@ static struct platform_device pcit_cplus_serial8250_device = { }, }; +static struct resource pcit_cmos_rsrc[] = { + { + .start = 0x70, + .end = 0x71, + .flags = IORESOURCE_IO + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device pcit_cmos_device = { + .name = "rtc_cmos", + .num_resources = ARRAY_SIZE(pcit_cmos_rsrc), + .resource = pcit_cmos_rsrc +}; + static struct resource sni_io_resource = { .start = 0x00000000UL, .end = 0x03bfffffUL, @@ -243,10 +261,8 @@ void __init sni_pcit_cplus_irq_init(void) setup_irq (MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq); } -void sni_pcit_init(void) +void __init sni_pcit_init(void) { - rtc_mips_get_time = mc146818_get_cmos_time; - rtc_mips_set_time = mc146818_set_rtc_mmss; board_time_init = sni_cpu_time_init; ioport_resource.end = sni_io_resource.end; #ifdef CONFIG_PCI @@ -261,10 +277,12 @@ static int __init snirm_pcit_setup_devinit(void) switch (sni_brd_type) { case SNI_BRD_PCI_TOWER: platform_device_register(&pcit_serial8250_device); + platform_device_register(&pcit_cmos_device); break; case SNI_BRD_PCI_TOWER_CPLUS: platform_device_register(&pcit_cplus_serial8250_device); + platform_device_register(&pcit_cmos_device); break; } return 0; diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index b82ff129f5e..4bfda020fdc 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -15,7 +15,6 @@ #include <asm/sni.h> #include <asm/time.h> -#include <asm/ds1216.h> #include <asm/irq_cpu.h> #define PORT(_base,_irq) \ @@ -41,20 +40,34 @@ static struct platform_device rm200_serial8250_device = { }, }; +static struct resource rm200_ds1216_rsrc[] = { + { + .start = 0x1cd41ffc, + .end = 0x1cd41fff, + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device rm200_ds1216_device = { + .name = "rtc-ds1216", + .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc), + .resource = rm200_ds1216_rsrc +}; + static struct resource snirm_82596_rm200_rsrc[] = { { - .start = 0xb8000000, - .end = 0xb80fffff, + .start = 0x18000000, + .end = 0x180fffff, .flags = IORESOURCE_MEM }, { - .start = 0xbb000000, - .end = 0xbb000004, + .start = 0x1b000000, + .end = 0x1b000004, .flags = IORESOURCE_MEM }, { - .start = 0xbff00000, - .end = 0xbff00020, + .start = 0x1ff00000, + .end = 0x1ff00020, .flags = IORESOURCE_MEM }, { @@ -96,6 +109,7 @@ static int __init snirm_setup_devinit(void) { if (sni_brd_type == SNI_BRD_RM200) { platform_device_register(&rm200_serial8250_device); + platform_device_register(&rm200_ds1216_device); platform_device_register(&snirm_82596_rm200_pdev); platform_device_register(&snirm_53c710_rm200_pdev); } @@ -176,11 +190,9 @@ void __init sni_rm200_irq_init(void) setup_irq (SNI_RM200_INT_START + 0, &sni_isa_irq); } -void sni_rm200_init(void) +void __init sni_rm200_init(void) { set_io_port_base(SNI_PORT_BASE + 0x02000000); ioport_resource.end += 0x02000000; - ds1216_base = (volatile unsigned char *) SNI_DS1216_RM200_BASE; - rtc_mips_get_time = ds1216_get_cmos_time; board_time_init = sni_cpu_time_init; } diff --git a/arch/mips/sni/sniprom.c b/arch/mips/sni/sniprom.c index 643366eb854..00a03a6e8f5 100644 --- a/arch/mips/sni/sniprom.c +++ b/arch/mips/sni/sniprom.c @@ -146,7 +146,10 @@ static void __init sni_console_setup(void) } if (baud) strcpy(options, baud); - add_preferred_console("ttyS", port, baud ? options : NULL); + if (strncmp (cdev, "tty552", 6) == 0) + add_preferred_console("ttyS", port, baud ? options : NULL); + else + add_preferred_console("ttySC", port, baud ? options : NULL); } } diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile index 2033ae77f63..83cda518f20 100644 --- a/arch/mips/tx4938/common/Makefile +++ b/arch/mips/tx4938/common/Makefile @@ -6,6 +6,6 @@ # unless it's something special (ie not a .c file). # -obj-y += prom.o setup.o irq.o rtc_rx5c348.o +obj-y += prom.o setup.o irq.o obj-$(CONFIG_KGDB) += dbgio.o diff --git a/arch/mips/tx4938/common/rtc_rx5c348.c b/arch/mips/tx4938/common/rtc_rx5c348.c deleted file mode 100644 index 07f782fc072..00000000000 --- a/arch/mips/tx4938/common/rtc_rx5c348.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * RTC routines for RICOH Rx5C348 SPI chip. - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/rtc.h> -#include <linux/time.h> -#include <linux/bcd.h> -#include <asm/time.h> -#include <asm/tx4938/spi.h> - -#define EPOCH 2000 - -/* registers */ -#define Rx5C348_REG_SECOND 0 -#define Rx5C348_REG_MINUTE 1 -#define Rx5C348_REG_HOUR 2 -#define Rx5C348_REG_WEEK 3 -#define Rx5C348_REG_DAY 4 -#define Rx5C348_REG_MONTH 5 -#define Rx5C348_REG_YEAR 6 -#define Rx5C348_REG_ADJUST 7 -#define Rx5C348_REG_ALARM_W_MIN 8 -#define Rx5C348_REG_ALARM_W_HOUR 9 -#define Rx5C348_REG_ALARM_W_WEEK 10 -#define Rx5C348_REG_ALARM_D_MIN 11 -#define Rx5C348_REG_ALARM_D_HOUR 12 -#define Rx5C348_REG_CTL1 14 -#define Rx5C348_REG_CTL2 15 - -/* register bits */ -#define Rx5C348_BIT_PM 0x20 /* REG_HOUR */ -#define Rx5C348_BIT_Y2K 0x80 /* REG_MONTH */ -#define Rx5C348_BIT_24H 0x20 /* REG_CTL1 */ -#define Rx5C348_BIT_XSTP 0x10 /* REG_CTL2 */ - -/* commands */ -#define Rx5C348_CMD_W(addr) (((addr) << 4) | 0x08) /* single write */ -#define Rx5C348_CMD_R(addr) (((addr) << 4) | 0x0c) /* single read */ -#define Rx5C348_CMD_MW(addr) (((addr) << 4) | 0x00) /* burst write */ -#define Rx5C348_CMD_MR(addr) (((addr) << 4) | 0x04) /* burst read */ - -static struct spi_dev_desc srtc_dev_desc = { - .baud = 1000000, /* 1.0Mbps @ Vdd 2.0V */ - .tcss = 31, - .tcsh = 1, - .tcsr = 62, - /* 31us for Tcss (62us for Tcsr) is required for carry operation) */ - .byteorder = 1, /* MSB-First */ - .polarity = 0, /* High-Active */ - .phase = 1, /* Shift-Then-Sample */ - -}; -static int srtc_chipid; -static int srtc_24h; - -static inline int -spi_rtc_io(unsigned char *inbuf, unsigned char *outbuf, unsigned int count) -{ - unsigned char *inbufs[1], *outbufs[1]; - unsigned int incounts[2], outcounts[2]; - inbufs[0] = inbuf; - incounts[0] = count; - incounts[1] = 0; - outbufs[0] = outbuf; - outcounts[0] = count; - outcounts[1] = 0; - return txx9_spi_io(srtc_chipid, &srtc_dev_desc, - inbufs, incounts, outbufs, outcounts, 0); -} - -/* RTC-dependent code for time.c */ - -static int -rtc_rx5c348_set_time(unsigned long t) -{ - unsigned char inbuf[8]; - struct rtc_time tm; - u8 year, month, day, hour, minute, second, century; - - /* convert */ - to_tm(t, &tm); - - year = tm.tm_year % 100; - month = tm.tm_mon+1; /* tm_mon starts from 0 to 11 */ - day = tm.tm_mday; - hour = tm.tm_hour; - minute = tm.tm_min; - second = tm.tm_sec; - century = tm.tm_year / 100; - - inbuf[0] = Rx5C348_CMD_MW(Rx5C348_REG_SECOND); - BIN_TO_BCD(second); - inbuf[1] = second; - BIN_TO_BCD(minute); - inbuf[2] = minute; - - if (srtc_24h) { - BIN_TO_BCD(hour); - inbuf[3] = hour; - } else { - /* hour 0 is AM12, noon is PM12 */ - inbuf[3] = 0; - if (hour >= 12) - inbuf[3] = Rx5C348_BIT_PM; - hour = (hour + 11) % 12 + 1; - BIN_TO_BCD(hour); - inbuf[3] |= hour; - } - inbuf[4] = 0; /* ignore week */ - BIN_TO_BCD(day); - inbuf[5] = day; - BIN_TO_BCD(month); - inbuf[6] = month; - if (century >= 20) - inbuf[6] |= Rx5C348_BIT_Y2K; - BIN_TO_BCD(year); - inbuf[7] = year; - /* write in one transfer to avoid data inconsistency */ - return spi_rtc_io(inbuf, NULL, 8); -} - -static unsigned long -rtc_rx5c348_get_time(void) -{ - unsigned char inbuf[8], outbuf[8]; - unsigned int year, month, day, hour, minute, second; - - inbuf[0] = Rx5C348_CMD_MR(Rx5C348_REG_SECOND); - memset(inbuf + 1, 0, 7); - /* read in one transfer to avoid data inconsistency */ - if (spi_rtc_io(inbuf, outbuf, 8)) - return 0; - second = outbuf[1]; - BCD_TO_BIN(second); - minute = outbuf[2]; - BCD_TO_BIN(minute); - if (srtc_24h) { - hour = outbuf[3]; - BCD_TO_BIN(hour); - } else { - hour = outbuf[3] & ~Rx5C348_BIT_PM; - BCD_TO_BIN(hour); - hour %= 12; - if (outbuf[3] & Rx5C348_BIT_PM) - hour += 12; - } - day = outbuf[5]; - BCD_TO_BIN(day); - month = outbuf[6] & ~Rx5C348_BIT_Y2K; - BCD_TO_BIN(month); - year = outbuf[7]; - BCD_TO_BIN(year); - year += EPOCH; - - return mktime(year, month, day, hour, minute, second); -} - -void __init -rtc_rx5c348_init(int chipid) -{ - unsigned char inbuf[2], outbuf[2]; - srtc_chipid = chipid; - /* turn on RTC if it is not on */ - inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL2); - inbuf[1] = 0; - spi_rtc_io(inbuf, outbuf, 2); - if (outbuf[1] & Rx5C348_BIT_XSTP) { - inbuf[0] = Rx5C348_CMD_W(Rx5C348_REG_CTL2); - inbuf[1] = 0; - spi_rtc_io(inbuf, NULL, 2); - } - - inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL1); - inbuf[1] = 0; - spi_rtc_io(inbuf, outbuf, 2); - if (outbuf[1] & Rx5C348_BIT_24H) - srtc_24h = 1; - - /* set the function pointers */ - rtc_mips_get_time = rtc_rx5c348_get_time; - rtc_mips_set_time = rtc_rx5c348_set_time; -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile index 226941279d7..10c94e62bf5 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile +++ b/arch/mips/tx4938/toshiba_rbtx4938/Makefile @@ -6,4 +6,4 @@ # unless it's something special (ie not a .c file). # -obj-y += prom.o setup.o irq.o spi_eeprom.o spi_txx9.o +obj-y += prom.o setup.o irq.o spi_eeprom.o diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index 2e96dbb248b..91aea7aff51 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -165,8 +165,6 @@ toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB); } -extern void __init txx9_spi_irqinit(int irc_irq); - void __init arch_init_irq(void) { extern void tx4938_irq_init(void); @@ -185,9 +183,5 @@ void __init arch_init_irq(void) /* Onboard 10M Ether: High Active */ TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000040); - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_SPI_SEL) { - txx9_spi_irqinit(RBTX4938_IRQ_IRC_SPI); - } - wbflush(); } diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c index f5d1ce739fc..6ed39a5aea7 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c @@ -14,13 +14,13 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/ioport.h> -#include <linux/proc_fs.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/console.h> #include <linux/pci.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <asm/wbflush.h> #include <asm/reboot.h> @@ -35,6 +35,9 @@ #include <linux/serial.h> #include <linux/serial_core.h> #endif +#include <linux/spi/spi.h> +#include <asm/tx4938/spi.h> +#include <asm/gpio.h> extern void rbtx4938_time_init(void) __init; extern char * __init prom_getcmdline(void); @@ -349,7 +352,7 @@ static struct pci_dev *fake_pci_dev(struct pci_controller *hose, static struct pci_dev dev; static struct pci_bus bus; - dev.sysdata = (void *)hose; + dev.sysdata = bus.sysdata = hose; dev.devfn = devfn; bus.number = busnr; bus.ops = hose->pci_ops; @@ -382,8 +385,10 @@ int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bu printk("PCI: Checking 66MHz capabilities...\n"); for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) { - early_read_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_VENDOR_ID, &vid); + if (early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_VENDOR_ID, + &vid) != PCIBIOS_SUCCESSFUL) + continue; if (vid == 0xffff) continue; @@ -460,7 +465,6 @@ static int __init tx4938_pcibios_init(void) int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); PCIBIOS_MIN_IO = 0x00001000UL; - PCIBIOS_MIN_MEM = 0x01000000UL; mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); @@ -574,82 +578,43 @@ arch_initcall(tx4938_pcibios_init); #define SEEPROM3_CS 1 /* IOC */ #define SRTC_CS 2 /* IOC */ -static int rbtx4938_spi_cs_func(int chipid, int on) -{ - unsigned char bit; - switch (chipid) { - case RBTX4938_SEEPROM1_CHIPID: - if (on) - tx4938_pioptr->dout &= ~(1 << SEEPROM1_CS); - else - tx4938_pioptr->dout |= (1 << SEEPROM1_CS); - return 0; - break; - case RBTX4938_SEEPROM2_CHIPID: - bit = (1 << SEEPROM2_CS); - break; - case RBTX4938_SEEPROM3_CHIPID: - bit = (1 << SEEPROM3_CS); - break; - case RBTX4938_SRTC_CHIPID: - bit = (1 << SRTC_CS); - break; - default: - return -ENODEV; - } - /* bit1,2,4 are low active, bit3 is high active */ - *rbtx4938_spics_ptr = - (*rbtx4938_spics_ptr & ~bit) | - ((on ? (bit ^ 0x0b) : ~(bit ^ 0x0b)) & bit); - return 0; -} - #ifdef CONFIG_PCI -extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len); - -int rbtx4938_get_tx4938_ethaddr(struct pci_dev *dev, unsigned char *addr) +static int __init rbtx4938_ethaddr_init(void) { - struct pci_controller *channel = (struct pci_controller *)dev->bus->sysdata; - static unsigned char dat[17]; - static int read_dat = 0; - int ch = 0; + unsigned char dat[17]; + unsigned char sum; + int i; - if (channel != &tx4938_pci_controller[1]) - return -ENODEV; - /* TX4938 PCIC1 */ - switch (PCI_SLOT(dev->devfn)) { - case TX4938_PCIC_IDSEL_AD_TO_SLOT(31): - ch = 0; - break; - case TX4938_PCIC_IDSEL_AD_TO_SLOT(30): - ch = 1; - break; - default: + /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ + if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { + printk(KERN_ERR "seeprom: read error.\n"); return -ENODEV; + } else { + if (strcmp(dat, "MAC") != 0) + printk(KERN_WARNING "seeprom: bad signature.\n"); + for (i = 0, sum = 0; i < sizeof(dat); i++) + sum += dat[i]; + if (sum) + printk(KERN_WARNING "seeprom: bad checksum.\n"); } - if (!read_dat) { - unsigned char sum; - int i; - read_dat = 1; - /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ - if (spi_eeprom_read(RBTX4938_SEEPROM1_CHIPID, - 0, dat, sizeof(dat))) { - printk(KERN_ERR "seeprom: read error.\n"); - } else { - if (strcmp(dat, "MAC") != 0) - printk(KERN_WARNING "seeprom: bad signature.\n"); - for (i = 0, sum = 0; i < sizeof(dat); i++) - sum += dat[i]; - if (sum) - printk(KERN_WARNING "seeprom: bad checksum.\n"); - } + for (i = 0; i < 2; i++) { + unsigned int slot = TX4938_PCIC_IDSEL_AD_TO_SLOT(31 - i); + unsigned int id = (1 << 8) | PCI_DEVFN(slot, 0); /* bus 1 */ + struct platform_device *pdev; + if (!(tx4938_ccfgptr->pcfg & + (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) + continue; + pdev = platform_device_alloc("tc35815-mac", id); + if (!pdev || + platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || + platform_device_add(pdev)) + platform_device_put(pdev); } - memcpy(addr, &dat[4 + 6 * ch], 6); return 0; } +device_initcall(rbtx4938_ethaddr_init); #endif /* CONFIG_PCI */ -extern void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on)); static void __init rbtx4938_spi_setup(void) { /* set SPI_SEL */ @@ -657,7 +622,6 @@ static void __init rbtx4938_spi_setup(void) /* chip selects for SPI devices */ tx4938_pioptr->dout |= (1 << SEEPROM1_CS); tx4938_pioptr->dir |= (1 << SEEPROM1_CS); - txx9_spi_init(TX4938_SPI_REG, rbtx4938_spi_cs_func); } static struct resource rbtx4938_fpga_resource; @@ -896,10 +860,8 @@ void tx4938_report_pcic_status(void) /* We use onchip r4k counter or TMR timer as our system wide timer * interrupt running at 100HZ. */ -extern void __init rtc_rx5c348_init(int chipid); void __init rbtx4938_time_init(void) { - rtc_rx5c348_init(RBTX4938_SRTC_CHIPID); mips_hpt_frequency = txx9_cpu_clock / 2; } @@ -1016,29 +978,6 @@ void __init toshiba_rbtx4938_setup(void) *rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr); } -#ifdef CONFIG_PROC_FS -extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid); -static int __init tx4938_spi_proc_setup(void) -{ - struct proc_dir_entry *tx4938_spi_eeprom_dir; - - tx4938_spi_eeprom_dir = proc_mkdir("spi_eeprom", 0); - - if (!tx4938_spi_eeprom_dir) - return -ENOMEM; - - /* don't allow user access to RBTX4938_SEEPROM1_CHIPID - * as it contains eth0 and eth1 MAC addresses - */ - spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM2_CHIPID); - spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM3_CHIPID); - - return 0; -} - -__initcall(tx4938_spi_proc_setup); -#endif - static int __init rbtx4938_ne_init(void) { struct resource res[] = { @@ -1057,3 +996,176 @@ static int __init rbtx4938_ne_init(void) return IS_ERR(dev) ? PTR_ERR(dev) : 0; } device_initcall(rbtx4938_ne_init); + +/* GPIO support */ + +static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); + +static void rbtx4938_spi_gpio_set(unsigned gpio, int value) +{ + u8 val; + unsigned long flags; + gpio -= 16; + spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); + val = *rbtx4938_spics_ptr; + if (value) + val |= 1 << gpio; + else + val &= ~(1 << gpio); + *rbtx4938_spics_ptr = val; + mmiowb(); + spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); +} + +static int rbtx4938_spi_gpio_dir_out(unsigned gpio, int value) +{ + rbtx4938_spi_gpio_set(gpio, value); + return 0; +} + +static DEFINE_SPINLOCK(tx4938_gpio_lock); + +static int tx4938_gpio_get(unsigned gpio) +{ + return tx4938_pioptr->din & (1 << gpio); +} + +static void tx4938_gpio_set_raw(unsigned gpio, int value) +{ + u32 val; + val = tx4938_pioptr->dout; + if (value) + val |= 1 << gpio; + else + val &= ~(1 << gpio); + tx4938_pioptr->dout = val; +} + +static void tx4938_gpio_set(unsigned gpio, int value) +{ + unsigned long flags; + spin_lock_irqsave(&tx4938_gpio_lock, flags); + tx4938_gpio_set_raw(gpio, value); + mmiowb(); + spin_unlock_irqrestore(&tx4938_gpio_lock, flags); +} + +static int tx4938_gpio_dir_in(unsigned gpio) +{ + spin_lock_irq(&tx4938_gpio_lock); + tx4938_pioptr->dir &= ~(1 << gpio); + mmiowb(); + spin_unlock_irq(&tx4938_gpio_lock); + return 0; +} + +static int tx4938_gpio_dir_out(unsigned int gpio, int value) +{ + spin_lock_irq(&tx4938_gpio_lock); + tx4938_gpio_set_raw(gpio, value); + tx4938_pioptr->dir |= 1 << gpio; + mmiowb(); + spin_unlock_irq(&tx4938_gpio_lock); + return 0; +} + +int gpio_direction_input(unsigned gpio) +{ + if (gpio < 16) + return tx4938_gpio_dir_in(gpio); + return -EINVAL; +} + +int gpio_direction_output(unsigned gpio, int value) +{ + if (gpio < 16) + return tx4938_gpio_dir_out(gpio, value); + if (gpio < 16 + 3) + return rbtx4938_spi_gpio_dir_out(gpio, value); + return -EINVAL; +} + +int gpio_get_value(unsigned gpio) +{ + if (gpio < 16) + return tx4938_gpio_get(gpio); + return 0; +} + +void gpio_set_value(unsigned gpio, int value) +{ + if (gpio < 16) + tx4938_gpio_set(gpio, value); + else + rbtx4938_spi_gpio_set(gpio, value); +} + +/* SPI support */ + +static void __init txx9_spi_init(unsigned long base, int irq) +{ + struct resource res[] = { + { + .start = base, + .end = base + 0x20 - 1, + .flags = IORESOURCE_MEM, + .parent = &tx4938_reg_resource, + }, { + .start = irq, + .flags = IORESOURCE_IRQ, + }, + }; + platform_device_register_simple("txx9spi", 0, + res, ARRAY_SIZE(res)); +} + +static int __init rbtx4938_spi_init(void) +{ + struct spi_board_info srtc_info = { + .modalias = "rs5c348", + .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ + .bus_num = 0, + .chip_select = 16 + SRTC_CS, + /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ + .mode = SPI_MODE_1 | SPI_CS_HIGH, + }; + spi_register_board_info(&srtc_info, 1); + spi_eeprom_register(SEEPROM1_CS); + spi_eeprom_register(16 + SEEPROM2_CS); + spi_eeprom_register(16 + SEEPROM3_CS); + txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); + return 0; +} +arch_initcall(rbtx4938_spi_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "spi-baseclk")) + return (struct clk *)(txx9_gbus_clock / 2 / 4); + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c index 89596e62f90..4d6b4ade5e8 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c @@ -10,209 +10,90 @@ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) */ #include <linux/init.h> -#include <linux/delay.h> -#include <linux/proc_fs.h> -#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> #include <asm/tx4938/spi.h> -#include <asm/tx4938/tx4938.h> -/* ATMEL 250x0 instructions */ -#define ATMEL_WREN 0x06 -#define ATMEL_WRDI 0x04 -#define ATMEL_RDSR 0x05 -#define ATMEL_WRSR 0x01 -#define ATMEL_READ 0x03 -#define ATMEL_WRITE 0x02 +#define AT250X0_PAGE_SIZE 8 -#define ATMEL_SR_BSY 0x01 -#define ATMEL_SR_WEN 0x02 -#define ATMEL_SR_BP0 0x04 -#define ATMEL_SR_BP1 0x08 - -DEFINE_SPINLOCK(spi_eeprom_lock); - -static struct spi_dev_desc seeprom_dev_desc = { - .baud = 1500000, /* 1.5Mbps */ - .tcss = 1, - .tcsh = 1, - .tcsr = 1, - .byteorder = 1, /* MSB-First */ - .polarity = 0, /* High-Active */ - .phase = 0, /* Sample-Then-Shift */ - -}; -static inline int -spi_eeprom_io(int chipid, - unsigned char **inbufs, unsigned int *incounts, - unsigned char **outbufs, unsigned int *outcounts) -{ - return txx9_spi_io(chipid, &seeprom_dev_desc, - inbufs, incounts, outbufs, outcounts, 0); -} - -int spi_eeprom_write_enable(int chipid, int enable) +/* register board information for at25 driver */ +int __init spi_eeprom_register(int chipid) { - unsigned char inbuf[1]; - unsigned char *inbufs[1]; - unsigned int incounts[2]; - unsigned long flags; - int stat; - inbuf[0] = enable ? ATMEL_WREN : ATMEL_WRDI; - inbufs[0] = inbuf; - incounts[0] = sizeof(inbuf); - incounts[1] = 0; - spin_lock_irqsave(&spi_eeprom_lock, flags); - stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL); - spin_unlock_irqrestore(&spi_eeprom_lock, flags); - return stat; -} - -static int spi_eeprom_read_status_nolock(int chipid) -{ - unsigned char inbuf[2], outbuf[2]; - unsigned char *inbufs[1], *outbufs[1]; - unsigned int incounts[2], outcounts[2]; - int stat; - inbuf[0] = ATMEL_RDSR; - inbuf[1] = 0; - inbufs[0] = inbuf; - incounts[0] = sizeof(inbuf); - incounts[1] = 0; - outbufs[0] = outbuf; - outcounts[0] = sizeof(outbuf); - outcounts[1] = 0; - stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts); - if (stat < 0) - return stat; - return outbuf[1]; + static struct spi_eeprom eeprom = { + .name = "at250x0", + .byte_len = 128, + .page_size = AT250X0_PAGE_SIZE, + .flags = EE_ADDR1, + }; + struct spi_board_info info = { + .modalias = "at25", + .max_speed_hz = 1500000, /* 1.5Mbps */ + .bus_num = 0, + .chip_select = chipid, + .platform_data = &eeprom, + /* Mode 0: High-Active, Sample-Then-Shift */ + }; + + return spi_register_board_info(&info, 1); } -int spi_eeprom_read_status(int chipid) -{ - unsigned long flags; - int stat; - spin_lock_irqsave(&spi_eeprom_lock, flags); - stat = spi_eeprom_read_status_nolock(chipid); - spin_unlock_irqrestore(&spi_eeprom_lock, flags); - return stat; -} +/* simple temporary spi driver to provide early access to seeprom. */ -int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len) -{ - unsigned char inbuf[2]; - unsigned char *inbufs[2], *outbufs[2]; - unsigned int incounts[2], outcounts[3]; - unsigned long flags; - int stat; - inbuf[0] = ATMEL_READ; - inbuf[1] = address; - inbufs[0] = inbuf; - inbufs[1] = NULL; - incounts[0] = sizeof(inbuf); - incounts[1] = 0; - outbufs[0] = NULL; - outbufs[1] = buf; - outcounts[0] = 2; - outcounts[1] = len; - outcounts[2] = 0; - spin_lock_irqsave(&spi_eeprom_lock, flags); - stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts); - spin_unlock_irqrestore(&spi_eeprom_lock, flags); - return stat; -} +static struct read_param { + int chipid; + int address; + unsigned char *buf; + int len; +} *read_param; -int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len) +static int __init early_seeprom_probe(struct spi_device *spi) { - unsigned char inbuf[2]; - unsigned char *inbufs[2]; - unsigned int incounts[3]; - unsigned long flags; - int i, stat; - - if (address / 8 != (address + len - 1) / 8) - return -EINVAL; - stat = spi_eeprom_write_enable(chipid, 1); - if (stat < 0) - return stat; - stat = spi_eeprom_read_status(chipid); - if (stat < 0) - return stat; - if (!(stat & ATMEL_SR_WEN)) - return -EPERM; - - inbuf[0] = ATMEL_WRITE; - inbuf[1] = address; - inbufs[0] = inbuf; - inbufs[1] = buf; - incounts[0] = sizeof(inbuf); - incounts[1] = len; - incounts[2] = 0; - spin_lock_irqsave(&spi_eeprom_lock, flags); - stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL); - if (stat < 0) - goto unlock_return; - - /* write start. max 10ms */ - for (i = 10; i > 0; i--) { - int stat = spi_eeprom_read_status_nolock(chipid); - if (stat < 0) - goto unlock_return; - if (!(stat & ATMEL_SR_BSY)) - break; - mdelay(1); + int stat = 0; + u8 cmd[2]; + int len = read_param->len; + char *buf = read_param->buf; + int address = read_param->address; + + dev_info(&spi->dev, "spiclk %u KHz.\n", + (spi->max_speed_hz + 500) / 1000); + if (read_param->chipid != spi->chip_select) + return -ENODEV; + while (len > 0) { + /* spi_write_then_read can only work with small chunk */ + int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; + cmd[0] = 0x03; /* AT25_READ */ + cmd[1] = address; + stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); + buf += c; + len -= c; + address += c; } - spin_unlock_irqrestore(&spi_eeprom_lock, flags); - if (i == 0) - return -EIO; - return len; - unlock_return: - spin_unlock_irqrestore(&spi_eeprom_lock, flags); return stat; } -#ifdef CONFIG_PROC_FS -#define MAX_SIZE 0x80 /* for ATMEL 25010 */ -static int spi_eeprom_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - unsigned int size = MAX_SIZE; - if (spi_eeprom_read((int)data, 0, (unsigned char *)page, size) < 0) - size = 0; - return size; -} - -static int spi_eeprom_write_proc(struct file *file, const char *buffer, - unsigned long count, void *data) -{ - unsigned int size = MAX_SIZE; - int i; - if (file->f_pos >= size) - return -EIO; - if (file->f_pos + count > size) - count = size - file->f_pos; - for (i = 0; i < count; i += 8) { - int len = count - i < 8 ? count - i : 8; - if (spi_eeprom_write((int)data, file->f_pos, - (unsigned char *)buffer, len) < 0) { - count = -EIO; - break; - } - buffer += len; - file->f_pos += len; - } - return count; -} +static struct spi_driver early_seeprom_driver __initdata = { + .driver = { + .name = "at25", + .owner = THIS_MODULE, + }, + .probe = early_seeprom_probe, +}; -__init void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid) +int __init spi_eeprom_read(int chipid, int address, + unsigned char *buf, int len) { - struct proc_dir_entry *entry; - char name[128]; - sprintf(name, "seeprom-%d", chipid); - entry = create_proc_entry(name, 0600, dir); - if (entry) { - entry->read_proc = spi_eeprom_read_proc; - entry->write_proc = spi_eeprom_write_proc; - entry->data = (void *)chipid; - } + int ret; + struct read_param param = { + .chipid = chipid, + .address = address, + .buf = buf, + .len = len + }; + + read_param = ¶m; + ret = spi_register_driver(&early_seeprom_driver); + if (!ret) + spi_unregister_driver(&early_seeprom_driver); + return ret; } -#endif /* CONFIG_PROC_FS */ diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c deleted file mode 100644 index 08b20cdfd7b..00000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/wait.h> -#include <asm/tx4938/spi.h> -#include <asm/tx4938/tx4938.h> - -static int (*txx9_spi_cs_func)(int chipid, int on); -static DEFINE_SPINLOCK(txx9_spi_lock); - -extern unsigned int txx9_gbus_clock; - -#define SPI_FIFO_SIZE 4 - -void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on)) -{ - txx9_spi_cs_func = cs_func; - /* enter config mode */ - tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR; -} - -static DECLARE_WAIT_QUEUE_HEAD(txx9_spi_wait); - -static irqreturn_t txx9_spi_interrupt(int irq, void *dev_id) -{ - /* disable rx intr */ - tx4938_spiptr->cr0 &= ~TXx9_SPCR0_RBSIE; - wake_up(&txx9_spi_wait); - - return IRQ_HANDLED; -} - -static struct irqaction txx9_spi_action = { - .handler = txx9_spi_interrupt, - .name = "spi", -}; - -void __init txx9_spi_irqinit(int irc_irq) -{ - setup_irq(irc_irq, &txx9_spi_action); -} - -int txx9_spi_io(int chipid, struct spi_dev_desc *desc, - unsigned char **inbufs, unsigned int *incounts, - unsigned char **outbufs, unsigned int *outcounts, - int cansleep) -{ - unsigned int incount, outcount; - unsigned char *inp, *outp; - int ret; - unsigned long flags; - - spin_lock_irqsave(&txx9_spi_lock, flags); - if ((tx4938_spiptr->mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE) { - spin_unlock_irqrestore(&txx9_spi_lock, flags); - return -EBUSY; - } - /* enter config mode */ - tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR; - tx4938_spiptr->cr0 = - (desc->byteorder ? TXx9_SPCR0_SBOS : 0) | - (desc->polarity ? TXx9_SPCR0_SPOL : 0) | - (desc->phase ? TXx9_SPCR0_SPHA : 0) | - 0x08; - tx4938_spiptr->cr1 = - (((TXX9_IMCLK + desc->baud) / (2 * desc->baud) - 1) << 8) | - 0x08 /* 8 bit only */; - /* enter active mode */ - tx4938_spiptr->mcr = TXx9_SPMCR_ACTIVE; - spin_unlock_irqrestore(&txx9_spi_lock, flags); - - /* CS ON */ - if ((ret = txx9_spi_cs_func(chipid, 1)) < 0) { - spin_unlock_irqrestore(&txx9_spi_lock, flags); - return ret; - } - udelay(desc->tcss); - - /* do scatter IO */ - inp = inbufs ? *inbufs : NULL; - outp = outbufs ? *outbufs : NULL; - incount = 0; - outcount = 0; - while (1) { - unsigned char data; - unsigned int count; - int i; - if (!incount) { - incount = incounts ? *incounts++ : 0; - inp = (incount && inbufs) ? *inbufs++ : NULL; - } - if (!outcount) { - outcount = outcounts ? *outcounts++ : 0; - outp = (outcount && outbufs) ? *outbufs++ : NULL; - } - if (!inp && !outp) - break; - count = SPI_FIFO_SIZE; - if (incount) - count = min(count, incount); - if (outcount) - count = min(count, outcount); - - /* now tx must be idle... */ - while (!(tx4938_spiptr->sr & TXx9_SPSR_SIDLE)) - ; - - tx4938_spiptr->cr0 = - (tx4938_spiptr->cr0 & ~TXx9_SPCR0_RXIFL_MASK) | - ((count - 1) << 12); - if (cansleep) { - /* enable rx intr */ - tx4938_spiptr->cr0 |= TXx9_SPCR0_RBSIE; - } - /* send */ - for (i = 0; i < count; i++) - tx4938_spiptr->dr = inp ? *inp++ : 0; - /* wait all rx data */ - if (cansleep) { - wait_event(txx9_spi_wait, - tx4938_spiptr->sr & TXx9_SPSR_SRRDY); - } else { - while (!(tx4938_spiptr->sr & TXx9_SPSR_RBSI)) - ; - } - /* receive */ - for (i = 0; i < count; i++) { - data = tx4938_spiptr->dr; - if (outp) - *outp++ = data; - } - if (incount) - incount -= count; - if (outcount) - outcount -= count; - } - - /* CS OFF */ - udelay(desc->tcsh); - txx9_spi_cs_func(chipid, 0); - udelay(desc->tcsr); - - spin_lock_irqsave(&txx9_spi_lock, flags); - /* enter config mode */ - tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR; - spin_unlock_irqrestore(&txx9_spi_lock, flags); - - return 0; -} |