diff options
Diffstat (limited to 'arch/powerpc/kernel')
44 files changed, 2303 insertions, 882 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9619285f64e..569f79ccd31 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -33,10 +33,10 @@ obj-y := cputable.o ptrace.o syscalls.o \ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ - paca.o cpu_setup_ppc970.o \ - cpu_setup_pa6t.o \ - firmware.o nvram_64.o + paca.o nvram_64.o firmware.o +obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o +obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o @@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o -extra-$(CONFIG_PPC_STD_MMU) := head_32.o -extra-$(CONFIG_PPC64) := head_64.o +extra-y := head_$(CONFIG_WORD_SIZE).o +extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o extra-$(CONFIG_40x) := head_40x.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o @@ -88,7 +88,7 @@ obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ - pci-common.o + pci-common.o pci_of_scan.o obj-$(CONFIG_PCI_MSI) += msi.o obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \ machine_kexec_$(CONFIG_WORD_SIZE).o @@ -115,6 +115,13 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),) obj-y += ppc_save_regs.o endif +# Disable GCOV in odd or sensitive code +GCOV_PROFILE_prom_init.o := n +GCOV_PROFILE_ftrace.o := n +GCOV_PROFILE_machine_kexec_64.o := n +GCOV_PROFILE_machine_kexec_32.o := n +GCOV_PROFILE_kprobes.o := n + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_ALTIVEC) += vector.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 197b15646ee..f0df285f0f8 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -52,9 +52,11 @@ #include <linux/kvm_host.h> #endif +#ifdef CONFIG_PPC32 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) #include "head_booke.h" #endif +#endif #if defined(CONFIG_FSL_BOOKE) #include "../mm/mmu_decl.h" @@ -140,6 +142,20 @@ int main(void) context.high_slices_psize)); DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def)); #endif /* CONFIG_PPC_MM_SLICES */ + +#ifdef CONFIG_PPC_BOOK3E + DEFINE(PACAPGD, offsetof(struct paca_struct, pgd)); + DEFINE(PACA_KERNELPGD, offsetof(struct paca_struct, kernel_pgd)); + DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); + DEFINE(PACA_EXTLB, offsetof(struct paca_struct, extlb)); + DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc)); + DEFINE(PACA_EXCRIT, offsetof(struct paca_struct, excrit)); + DEFINE(PACA_EXDBG, offsetof(struct paca_struct, exdbg)); + DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack)); + DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack)); + DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack)); +#endif /* CONFIG_PPC_BOOK3E */ + #ifdef CONFIG_PPC_STD_MMU_64 DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); @@ -262,6 +278,7 @@ int main(void) DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8); #endif /* CONFIG_PPC64 */ +#if defined(CONFIG_PPC32) #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE); DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0)); @@ -280,7 +297,7 @@ int main(void) DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1)); DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit)); #endif - +#endif DEFINE(CLONE_VM, CLONE_VM); DEFINE(CLONE_UNTRACED, CLONE_UNTRACED); diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 1e9949e6885..55cba4a8a95 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -21,7 +21,7 @@ _GLOBAL(__setup_cpu_603) mflr r4 BEGIN_MMU_FTR_SECTION li r10,0 - mtspr SPRN_SPRG4,r10 /* init SW LRU tracking */ + mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) BEGIN_FTR_SECTION bl __init_fpu_registers diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 4a24a2fc457..0b9c9135922 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -89,11 +89,15 @@ extern void __restore_cpu_power7(void); #define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\ PPC_FEATURE_TRUE_LE | \ PPC_FEATURE_HAS_ALTIVEC_COMP) +#ifdef CONFIG_PPC_BOOK3E_64 +#define COMMON_USER_BOOKE (COMMON_USER_PPC64 | PPC_FEATURE_BOOKE) +#else #define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \ PPC_FEATURE_BOOKE) +#endif static struct cpu_spec __initdata cpu_specs[] = { -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 { /* Power3 */ .pvr_mask = 0xffff0000, .pvr_value = 0x00400000, @@ -508,7 +512,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "power4", } -#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC_BOOK3S_64 */ + #ifdef CONFIG_PPC32 #if CLASSIC_PPC { /* 601 */ @@ -1630,7 +1635,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .platform = "ppc440", }, { /* 460EX */ - .pvr_mask = 0xffff0002, + .pvr_mask = 0xffff0006, .pvr_value = 0x13020002, .cpu_name = "460EX", .cpu_features = CPU_FTRS_440x6, @@ -1642,8 +1647,21 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 460EX Rev B */ + .pvr_mask = 0xffff0007, + .pvr_value = 0x13020004, + .cpu_name = "460EX Rev. B", + .cpu_features = CPU_FTRS_440x6, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_44x, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460ex, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, { /* 460GT */ - .pvr_mask = 0xffff0002, + .pvr_mask = 0xffff0006, .pvr_value = 0x13020000, .cpu_name = "460GT", .cpu_features = CPU_FTRS_440x6, @@ -1655,6 +1673,19 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 460GT Rev B */ + .pvr_mask = 0xffff0007, + .pvr_value = 0x13020005, + .cpu_name = "460GT Rev. B", + .cpu_features = CPU_FTRS_440x6, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_44x, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460gt, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, { /* 460SX */ .pvr_mask = 0xffffff00, .pvr_value = 0x13541800, @@ -1797,6 +1828,29 @@ static struct cpu_spec __initdata cpu_specs[] = { } #endif /* CONFIG_E500 */ #endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC_BOOK3E_64 + { /* This is a default entry to get going, to be replaced by + * a real one at some stage + */ +#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) + .pvr_mask = 0x00000000, + .pvr_value = 0x00000000, + .cpu_name = "Book3E", + .cpu_features = CPU_FTRS_BASE_BOOK3E, + .cpu_user_features = COMMON_USER_PPC64, + .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | + MMU_FTR_USE_TLBIVAX_BCAST | + MMU_FTR_LOCK_BCAST_INVAL, + .icache_bsize = 64, + .dcache_bsize = 64, + .num_pmcs = 0, + .machine_check = machine_check_generic, + .platform = "power6", + }, +#endif }; static struct cpu_spec the_cpu_spec; diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2983adac8cc..87ddb3fb948 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -89,7 +89,7 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 1; } -struct dma_mapping_ops dma_iommu_ops = { +struct dma_map_ops dma_iommu_ops = { .alloc_coherent = dma_iommu_alloc_coherent, .free_coherent = dma_iommu_free_coherent, .map_sg = dma_iommu_map_sg, diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index e8a57de85bc..e96cbbd9b44 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -25,33 +25,13 @@ int swiotlb __read_mostly; unsigned int ppc_swiotlb_enable; /* - * Determine if an address is reachable by a pci device, or if we must bounce. - */ -static int -swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size) -{ - dma_addr_t max; - struct pci_controller *hose; - struct pci_dev *pdev = to_pci_dev(hwdev); - - hose = pci_bus_to_host(pdev->bus); - max = hose->dma_window_base_cur + hose->dma_window_size; - - /* check that we're within mapped pci window space */ - if ((addr + size > max) | (addr < hose->dma_window_base_cur)) - return 1; - - return 0; -} - -/* * At the moment, all platforms that use this code only require * swiotlb to be used if we're operating on HIGHMEM. Since * we don't ever call anything other than map_sg, unmap_sg, * map_page, and unmap_page on highmem, use normal dma_ops * for everything else. */ -struct dma_mapping_ops swiotlb_dma_ops = { +struct dma_map_ops swiotlb_dma_ops = { .alloc_coherent = dma_direct_alloc_coherent, .free_coherent = dma_direct_free_coherent, .map_sg = swiotlb_map_sg_attrs, @@ -62,33 +42,34 @@ struct dma_mapping_ops swiotlb_dma_ops = { .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, .sync_single_range_for_device = swiotlb_sync_single_range_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = swiotlb_sync_sg_for_device + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .mapping_error = swiotlb_dma_mapping_error, }; -struct dma_mapping_ops swiotlb_pci_dma_ops = { - .alloc_coherent = dma_direct_alloc_coherent, - .free_coherent = dma_direct_free_coherent, - .map_sg = swiotlb_map_sg_attrs, - .unmap_sg = swiotlb_unmap_sg_attrs, - .dma_supported = swiotlb_dma_supported, - .map_page = swiotlb_map_page, - .unmap_page = swiotlb_unmap_page, - .addr_needs_map = swiotlb_pci_addr_needs_map, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, - .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = swiotlb_sync_sg_for_device -}; +void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) +{ + struct pci_controller *hose; + struct dev_archdata *sd; + + hose = pci_bus_to_host(pdev->bus); + sd = &pdev->dev.archdata; + sd->max_direct_dma_addr = + hose->dma_window_base_cur + hose->dma_window_size; +} static int ppc_swiotlb_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; + struct dev_archdata *sd; /* We are only intereted in device addition */ if (action != BUS_NOTIFY_ADD_DEVICE) return 0; + sd = &dev->archdata; + sd->max_direct_dma_addr = 0; + /* May need to bounce if the device can't address all of DRAM */ if (dma_get_mask(dev) < lmb_end_of_DRAM()) set_dma_ops(dev, &swiotlb_dma_ops); diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index ccf129d47d8..21b784d7e7d 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -7,6 +7,7 @@ #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/dma-debug.h> #include <linux/lmb.h> #include <asm/bug.h> #include <asm/abs_addr.h> @@ -140,7 +141,7 @@ static inline void dma_direct_sync_single_range(struct device *dev, } #endif -struct dma_mapping_ops dma_direct_ops = { +struct dma_map_ops dma_direct_ops = { .alloc_coherent = dma_direct_alloc_coherent, .free_coherent = dma_direct_free_coherent, .map_sg = dma_direct_map_sg, @@ -156,3 +157,13 @@ struct dma_mapping_ops dma_direct_ops = { #endif }; EXPORT_SYMBOL(dma_direct_ops); + +#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) + +static int __init dma_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + + return 0; +} +fs_initcall(dma_init); diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 3cadba60a4b..1175a8539e6 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -88,7 +88,7 @@ crit_transfer_to_handler: mfspr r0,SPRN_SRR1 stw r0,_SRR1(r11) - mfspr r8,SPRN_SPRG3 + mfspr r8,SPRN_SPRG_THREAD lwz r0,KSP_LIMIT(r8) stw r0,SAVED_KSP_LIMIT(r11) rlwimi r0,r1,0,0,(31-THREAD_SHIFT) @@ -108,7 +108,7 @@ crit_transfer_to_handler: mfspr r0,SPRN_SRR1 stw r0,crit_srr1@l(0) - mfspr r8,SPRN_SPRG3 + mfspr r8,SPRN_SPRG_THREAD lwz r0,KSP_LIMIT(r8) stw r0,saved_ksp_limit@l(0) rlwimi r0,r1,0,0,(31-THREAD_SHIFT) @@ -138,7 +138,7 @@ transfer_to_handler: mfspr r2,SPRN_XER stw r12,_CTR(r11) stw r2,_XER(r11) - mfspr r12,SPRN_SPRG3 + mfspr r12,SPRN_SPRG_THREAD addi r2,r12,-THREAD tovirt(r2,r2) /* set r2 to current */ beq 2f /* if from user, fix up THREAD.regs */ @@ -680,7 +680,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE) tophys(r0,r4) CLR_TOP32(r0) - mtspr SPRN_SPRG3,r0 /* Update current THREAD phys addr */ + mtspr SPRN_SPRG_THREAD,r0 /* Update current THREAD phys addr */ lwz r1,KSP(r4) /* Load new stack pointer */ /* save the old current 'last' for return value */ @@ -1057,7 +1057,7 @@ exc_exit_restart_end: #ifdef CONFIG_40x .globl ret_from_crit_exc ret_from_crit_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lis r10,saved_ksp_limit@ha; lwz r10,saved_ksp_limit@l(r10); tovirt(r9,r9); @@ -1074,7 +1074,7 @@ ret_from_crit_exc: #ifdef CONFIG_BOOKE .globl ret_from_crit_exc ret_from_crit_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) RESTORE_xSRR(SRR0,SRR1); @@ -1083,7 +1083,7 @@ ret_from_crit_exc: .globl ret_from_debug_exc ret_from_debug_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) lwz r9,THREAD_INFO-THREAD(r9) @@ -1097,7 +1097,7 @@ ret_from_debug_exc: .globl ret_from_mcheck_exc ret_from_mcheck_exc: - mfspr r9,SPRN_SPRG3 + mfspr r9,SPRN_SPRG_THREAD lwz r10,SAVED_KSP_LIMIT(r1) stw r10,KSP_LIMIT(r9) RESTORE_xSRR(SRR0,SRR1); @@ -1255,7 +1255,7 @@ _GLOBAL(enter_rtas) MTMSRD(r0) /* don't get trashed */ li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR) mtlr r6 - mtspr SPRN_SPRG2,r7 + mtspr SPRN_SPRG_RTAS,r7 mtspr SPRN_SRR0,r8 mtspr SPRN_SRR1,r9 RFI @@ -1265,7 +1265,7 @@ _GLOBAL(enter_rtas) FIX_SRR1(r9,r0) addi r1,r1,INT_FRAME_SIZE li r0,0 - mtspr SPRN_SPRG2,r0 + mtspr SPRN_SPRG_RTAS,r0 mtspr SPRN_SRR0,r8 mtspr SPRN_SRR1,r9 RFI /* return to caller */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 43e073477c3..66bcda34a6b 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION 2: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ + + /* Hard enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else mfmsr r11 ori r11,r11,MSR_EE mtmsrd r11,1 +#endif /* CONFIG_PPC_BOOK3E */ #ifdef SHOW_SYSCALLS bl .do_show_syscall @@ -168,15 +174,25 @@ syscall_exit: #endif clrrdi r12,r1,THREAD_SHIFT - /* disable interrupts so current_thread_info()->flags can't change, - and so that we don't get interrupted after loading SRR0/1. */ ld r8,_MSR(r1) +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ andi. r10,r8,MSR_RI beq- unrecov_restore +#endif + + /* Disable interrupts so current_thread_info()->flags can't change, + * and so that we don't get interrupted after loading SRR0/1. + */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r10 rldicl r10,r10,48,1 rotldi r10,r10,16 mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ + ld r9,TI_FLAGS(r12) li r11,-_LAST_ERRNO andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) @@ -194,9 +210,13 @@ syscall_error_cont: * userspace and we take an exception after restoring r13, * we end up corrupting the userspace r13 value. */ +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ li r12,MSR_RI andc r11,r10,r12 mtmsrd r11,1 /* clear MSR.RI */ +#endif /* CONFIG_PPC_BOOK3S */ + beq- 1f ACCOUNT_CPU_USER_EXIT(r11, r12) ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ @@ -206,7 +226,7 @@ syscall_error_cont: mtcr r5 mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r8 - rfid + RFI b . /* prevent speculative execution */ syscall_error: @@ -276,9 +296,13 @@ syscall_exit_work: beq .ret_from_except_lite /* Re-enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else mfmsr r10 ori r10,r10,MSR_EE mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD @@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) and. r0,r0,r22 beq+ 1f andc r22,r22,r0 - mtmsrd r22 + MTMSRD(r22) isync 1: std r20,_NIP(r1) mfcr r23 @@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) std r6,PACACURRENT(r13) /* Set new 'current' */ ld r8,KSP(r4) /* new stack pointer */ +#ifdef CONFIG_PPC_BOOK3S BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(95) clrrdi r6,r8,28 /* get its ESID */ @@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT) slbie r6 /* Workaround POWER5 < DD2.1 issue */ slbmte r7,r0 isync - 2: +#endif /* !CONFIG_PPC_BOOK3S */ + clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE because we don't need to leave the 288-byte ABI gap at the @@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite) * can't change between when we test it and when we return * from the interrupt. */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r10 /* Get current interrupt state */ rldicl r9,r10,48,1 /* clear MSR_EE */ rotldi r9,r9,16 mtmsrd r9,1 /* Update machine state */ +#endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ @@ -540,6 +570,9 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ stb r4,PACAHARDIRQEN(r13) +#ifdef CONFIG_PPC_BOOK3E + b .exception_return_book3e +#else ld r4,_CTR(r1) ld r0,_LINK(r1) mtctr r4 @@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) rfid b . /* prevent speculative execution */ +#endif /* CONFIG_PPC_BOOK3E */ + iseries_check_pending_irqs: #ifdef CONFIG_PPC_ISERIES ld r5,SOFTE(r1) @@ -638,6 +673,11 @@ do_work: li r0,1 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 + bl .preempt_schedule + wrteei 0 +#else ori r10,r10,MSR_EE mtmsrd r10,1 /* reenable interrupts */ bl .preempt_schedule @@ -646,6 +686,7 @@ do_work: rldicl r10,r10,48,1 /* disable interrupts again */ rotldi r10,r10,16 mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b @@ -654,8 +695,12 @@ do_work: user_work: #endif /* Enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else ori r10,r10,MSR_EE mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ andi. r0,r4,_TIF_NEED_RESCHED beq 1f @@ -762,7 +807,7 @@ _GLOBAL(enter_rtas) _STATIC(rtas_return_loc) /* relocation is off at this point */ - mfspr r4,SPRN_SPRG3 /* Get PACA */ + mfspr r4,SPRN_SPRG_PACA /* Get PACA */ clrldi r4,r4,2 /* convert to realmode address */ bcl 20,31,$+4 @@ -793,7 +838,7 @@ _STATIC(rtas_restore_regs) REST_8GPRS(14, r1) /* Restore the non-volatiles */ REST_10GPRS(22, r1) /* ditto */ - mfspr r13,SPRN_SPRG3 + mfspr r13,SPRN_SPRG_PACA ld r4,_CCR(r1) mtcr r4 @@ -823,33 +868,24 @@ _GLOBAL(enter_prom) * of all registers that it saves. We therefore save those registers * PROM might touch to the stack. (r0, r3-r13 are caller saved) */ - SAVE_8GPRS(2, r1) + SAVE_GPR(2, r1) SAVE_GPR(13, r1) SAVE_8GPRS(14, r1) SAVE_10GPRS(22, r1) - mfcr r4 - std r4,_CCR(r1) - mfctr r5 - std r5,_CTR(r1) - mfspr r6,SPRN_XER - std r6,_XER(r1) - mfdar r7 - std r7,_DAR(r1) - mfdsisr r8 - std r8,_DSISR(r1) - mfsrr0 r9 - std r9,_SRR0(r1) - mfsrr1 r10 - std r10,_SRR1(r1) + mfcr r10 mfmsr r11 + std r10,_CCR(r1) std r11,_MSR(r1) /* Get the PROM entrypoint */ - ld r0,GPR4(r1) - mtlr r0 + mtlr r4 /* Switch MSR to 32 bits mode */ +#ifdef CONFIG_PPC_BOOK3E + rlwinm r11,r11,0,1,31 + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ mfmsr r11 li r12,1 rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) @@ -858,10 +894,10 @@ _GLOBAL(enter_prom) rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) andc r11,r11,r12 mtmsrd r11 +#endif /* CONFIG_PPC_BOOK3E */ isync - /* Restore arguments & enter PROM here... */ - ld r3,GPR3(r1) + /* Enter PROM here... */ blrl /* Just make sure that r1 top 32 bits didn't get @@ -871,7 +907,7 @@ _GLOBAL(enter_prom) /* Restore the MSR (back to 64 bits) */ ld r0,_MSR(r1) - mtmsrd r0 + MTMSRD(r0) isync /* Restore other registers */ @@ -881,18 +917,6 @@ _GLOBAL(enter_prom) REST_10GPRS(22, r1) ld r4,_CCR(r1) mtcr r4 - ld r5,_CTR(r1) - mtctr r5 - ld r6,_XER(r1) - mtspr SPRN_XER,r6 - ld r7,_DAR(r1) - mtdar r7 - ld r8,_DSISR(r1) - mtdsisr r8 - ld r9,_SRR0(r1) - mtsrr0 r9 - ld r10,_SRR1(r1) - mtsrr1 r10 addi r1,r1,PROM_FRAME_SIZE ld r0,16(r1) diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S new file mode 100644 index 00000000000..9048f96237f --- /dev/null +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -0,0 +1,1001 @@ +/* + * Boot code and exception vectors for Book3E processors + * + * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/threads.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/cputable.h> +#include <asm/setup.h> +#include <asm/thread_info.h> +#include <asm/reg.h> +#include <asm/exception-64e.h> +#include <asm/bug.h> +#include <asm/irqflags.h> +#include <asm/ptrace.h> +#include <asm/ppc-opcode.h> +#include <asm/mmu.h> + +/* XXX This will ultimately add space for a special exception save + * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... + * when taking special interrupts. For now we don't support that, + * special interrupts from within a non-standard level will probably + * blow you up + */ +#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE + +/* Exception prolog code for all exceptions */ +#define EXCEPTION_PROLOG(n, type, addition) \ + mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \ + mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \ + std r10,PACA_EX##type+EX_R10(r13); \ + std r11,PACA_EX##type+EX_R11(r13); \ + mfcr r10; /* save CR */ \ + addition; /* additional code for that exc. */ \ + std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \ + stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \ + mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \ + type##_SET_KSTACK; /* get special stack if necessary */\ + andi. r10,r11,MSR_PR; /* save stack pointer */ \ + beq 1f; /* branch around if supervisor */ \ + ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\ +1: cmpdi cr1,r1,0; /* check if SP makes sense */ \ + bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \ + mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */ + +/* Exception type-specific macros */ +#define GEN_SET_KSTACK \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ +#define SPRN_GEN_SRR0 SPRN_SRR0 +#define SPRN_GEN_SRR1 SPRN_SRR1 + +#define CRIT_SET_KSTACK \ + ld r1,PACA_CRIT_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_CRIT_SRR0 SPRN_CSRR0 +#define SPRN_CRIT_SRR1 SPRN_CSRR1 + +#define DBG_SET_KSTACK \ + ld r1,PACA_DBG_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_DBG_SRR0 SPRN_DSRR0 +#define SPRN_DBG_SRR1 SPRN_DSRR1 + +#define MC_SET_KSTACK \ + ld r1,PACA_MC_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_MC_SRR0 SPRN_MCSRR0 +#define SPRN_MC_SRR1 SPRN_MCSRR1 + +#define NORMAL_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, GEN, addition##_GEN) + +#define CRIT_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, CRIT, addition##_CRIT) + +#define DBG_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, DBG, addition##_DBG) + +#define MC_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, MC, addition##_MC) + + +/* Variants of the "addition" argument for the prolog + */ +#define PROLOG_ADDITION_NONE_GEN +#define PROLOG_ADDITION_NONE_CRIT +#define PROLOG_ADDITION_NONE_DBG +#define PROLOG_ADDITION_NONE_MC + +#define PROLOG_ADDITION_MASKABLE_GEN \ + lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \ + cmpwi cr0,r11,0; /* yes -> go out of line */ \ + beq masked_interrupt_book3e; + +#define PROLOG_ADDITION_2REGS_GEN \ + std r14,PACA_EXGEN+EX_R14(r13); \ + std r15,PACA_EXGEN+EX_R15(r13) + +#define PROLOG_ADDITION_1REG_GEN \ + std r14,PACA_EXGEN+EX_R14(r13); + +#define PROLOG_ADDITION_2REGS_CRIT \ + std r14,PACA_EXCRIT+EX_R14(r13); \ + std r15,PACA_EXCRIT+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_DBG \ + std r14,PACA_EXDBG+EX_R14(r13); \ + std r15,PACA_EXDBG+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_MC \ + std r14,PACA_EXMC+EX_R14(r13); \ + std r15,PACA_EXMC+EX_R15(r13) + +/* Core exception code for all exceptions except TLB misses. + * XXX: Needs to make SPRN_SPRG_GEN depend on exception type + */ +#define EXCEPTION_COMMON(n, excf, ints) \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + std r10,_NIP(r1); /* save SRR0 to stackframe */ \ + std r11,_MSR(r1); /* save SRR1 to stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \ + ld r3,excf+EX_R10(r13); /* get back r10 */ \ + ld r4,excf+EX_R11(r13); /* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r6; /* save LR in stackframe */ \ + mfctr r7; /* save CTR in stackframe */ \ + mfspr r8,SPRN_XER; /* save XER in stackframe */ \ + ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \ + lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \ + lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \ + ld r12,exception_marker@toc(r2); \ + li r0,0; \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + std r6,_LINK(r1); \ + std r7,_CTR(r1); \ + std r8,_XER(r1); \ + li r3,(n)+1; /* indicate partial regs in trap */ \ + std r9,0(r1); /* store stack frame back link */ \ + std r10,_CCR(r1); /* store orig CR in stackframe */ \ + std r9,GPR1(r1); /* store stack frame back link */ \ + std r11,SOFTE(r1); /* and save it to stackframe */ \ + std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ + std r3,_TRAP(r1); /* set trap number */ \ + std r0,RESULT(r1); /* clear regs->result */ \ + ints; + +/* Variants for the "ints" argument */ +#define INTS_KEEP +#define INTS_DISABLE_SOFT \ + stb r0,PACASOFTIRQEN(r13); /* mark interrupts soft-disabled */ \ + TRACE_DISABLE_INTS; +#define INTS_DISABLE_HARD \ + stb r0,PACAHARDIRQEN(r13); /* and hard disabled */ +#define INTS_DISABLE_ALL \ + INTS_DISABLE_SOFT \ + INTS_DISABLE_HARD + +/* This is called by exceptions that used INTS_KEEP (that is did not clear + * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE + * to it's previous value + * + * XXX In the long run, we may want to open-code it in order to separate the + * load from the wrtee, thus limiting the latency caused by the dependency + * but at this point, I'll favor code clarity until we have a near to final + * implementation + */ +#define INTS_RESTORE_HARD \ + ld r11,_MSR(r1); \ + wrtee r11; + +/* XXX FIXME: Restore r14/r15 when necessary */ +#define BAD_STACK_TRAMPOLINE(n) \ +exc_##n##_bad_stack: \ + li r1,(n); /* get exception number */ \ + sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ + b bad_stack_book3e; /* bad stack error */ + +#define EXCEPTION_STUB(loc, label) \ + . = interrupt_base_book3e + loc; \ + nop; /* To make debug interrupts happy */ \ + b exc_##label##_book3e; + +#define ACK_NONE(r) +#define ACK_DEC(r) \ + lis r,TSR_DIS@h; \ + mtspr SPRN_TSR,r +#define ACK_FIT(r) \ + lis r,TSR_FIS@h; \ + mtspr SPRN_TSR,r + +#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \ + START_EXCEPTION(label); \ + NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \ + EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \ + ack(r8); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite; + +/* This value is used to mark exception frames on the stack. */ + .section ".toc","aw" +exception_marker: + .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER + + +/* + * And here we have the exception vectors ! + */ + + .text + .balign 0x1000 + .globl interrupt_base_book3e +interrupt_base_book3e: /* fake trap */ + /* Note: If real debug exceptions are supported by the HW, the vector + * below will have to be patched up to point to an appropriate handler + */ + EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */ + EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */ + EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ + EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */ + EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */ + EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */ + EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */ + EXCEPTION_STUB(0x0e0, program) /* 0x0700 */ + EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */ + EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */ + EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */ + EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ + EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ + EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ + EXCEPTION_STUB(0x1c0, data_tlb_miss) + EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + +#if 0 + EXCEPTION_STUB(0x280, processor_doorbell) + EXCEPTION_STUB(0x220, processor_doorbell_crit) +#endif + .globl interrupt_end_book3e +interrupt_end_book3e: + +/* Critical Input Interrupt */ + START_EXCEPTION(critical_input); + CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .critical_exception +// b ret_from_crit_except + b . + +/* Machine Check Interrupt */ + START_EXCEPTION(machine_check); + CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL) +// bl special_reg_save_mc +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .machine_check_exception +// b ret_from_mc_except + b . + +/* Data Storage Interrupt */ + START_EXCEPTION(data_storage) + NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP) + b storage_fault_common + +/* Instruction Storage Interrupt */ + START_EXCEPTION(instruction_storage); + NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS) + li r15,0 + mr r14,r10 + EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP) + b storage_fault_common + +/* External Input Interrupt */ + MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE) + +/* Alignment */ + START_EXCEPTION(alignment); + NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP) + b alignment_more /* no room, go out of line */ + +/* Program Interrupt */ + START_EXCEPTION(program); + NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG) + mfspr r14,SPRN_ESR + EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + bl .save_nvgprs + INTS_RESTORE_HARD + bl .program_check_exception + b .ret_from_except + +/* Floating Point Unavailable Interrupt */ + START_EXCEPTION(fp_unavailable); + NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE) + /* we can probably do a shorter exception entry for that one... */ + EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP) + bne 1f /* if from user, just load it up */ + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + INTS_RESTORE_HARD + bl .kernel_fp_unavailable_exception + BUG_OPCODE +1: ld r12,_MSR(r1) + bl .load_up_fpu + b fast_exception_return + +/* Decrementer Interrupt */ + MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC) + +/* Fixed Interval Timer Interrupt */ + MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT) + +/* Watchdog Timer Interrupt */ + START_EXCEPTION(watchdog); + CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .unknown_exception +// b ret_from_crit_except + b . + +/* System Call Interrupt */ + START_EXCEPTION(system_call) + mr r9,r13 /* keep a copy of userland r13 */ + mfspr r11,SPRN_SRR0 /* get return address */ + mfspr r12,SPRN_SRR1 /* get previous MSR */ + mfspr r13,SPRN_SPRG_PACA /* get our PACA */ + b system_call_common + +/* Auxillary Processor Unavailable Interrupt */ + START_EXCEPTION(ap_unavailable); + NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .save_nvgprs + INTS_RESTORE_HARD + bl .unknown_exception + b .ret_from_except + +/* Debug exception as a critical interrupt*/ + START_EXCEPTION(debug_crit); + CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS) + + /* + * If there is a single step or branch-taken exception in an + * exception entry sequence, it was probably meant to apply to + * the code where the exception occurred (since exception entry + * doesn't turn off DE automatically). We simulate the effect + * of turning off DE on entry to an exception handler by turning + * off DE in the CSRR1 value and clearing the debug status. + */ + + mfspr r14,SPRN_DBSR /* check single-step/branch taken */ + andis. r15,r14,DBSR_IC@h + beq+ 1f + + LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) + LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) + cmpld cr0,r10,r14 + cmpld cr1,r10,r15 + blt+ cr0,1f + bge+ cr1,1f + + /* here it looks like we got an inappropriate debug exception. */ + lis r14,DBSR_IC@h /* clear the IC event */ + rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ + mtspr SPRN_DBSR,r14 + mtspr SPRN_CSRR1,r11 + lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */ + ld r1,PACA_EXCRIT+EX_R1(r13) + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + mtcr r10 + ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */ + ld r11,PACA_EXCRIT+EX_R11(r13) + mfspr r13,SPRN_SPRG_CRIT_SCRATCH + rfci + + /* Normal debug exception */ + /* XXX We only handle coming from userspace for now since we can't + * quite save properly an interrupted kernel state yet + */ +1: andi. r14,r11,MSR_PR; /* check for userspace again */ + beq kernel_dbg_exc; /* if from kernel mode */ + + /* Now we mash up things to make it look like we are coming on a + * normal exception + */ + mfspr r15,SPRN_SPRG_CRIT_SCRATCH + mtspr SPRN_SPRG_GEN_SCRATCH,r15 + mfspr r14,SPRN_DBSR + EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + bl .save_nvgprs + bl .DebugException + b .ret_from_except + +kernel_dbg_exc: + b . /* NYI */ + + +/* + * An interrupt came in while soft-disabled; clear EE in SRR1, + * clear paca->hard_enabled and return. + */ +masked_interrupt_book3e: + mtcr r10 + stb r11,PACAHARDIRQEN(r13) + mfspr r10,SPRN_SRR1 + rldicl r11,r10,48,1 /* clear MSR_EE */ + rotldi r10,r11,16 + mtspr SPRN_SRR1,r10 + ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */ + ld r11,PACA_EXGEN+EX_R11(r13); + mfspr r13,SPRN_SPRG_GEN_SCRATCH; + rfi + b . + +/* + * This is called from 0x300 and 0x400 handlers after the prologs with + * r14 and r15 containing the fault address and error code, with the + * original values stashed away in the PACA + */ +storage_fault_common: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + mr r5,r15 + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + INTS_RESTORE_HARD + bl .do_page_fault + cmpdi r3,0 + bne- 1f + b .ret_from_except_lite +1: bl .save_nvgprs + mr r5,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + ld r4,_DAR(r1) + bl .bad_page_fault + b .ret_from_except + +/* + * Alignment exception doesn't fit entirely in the 0x100 bytes so it + * continues here. + */ +alignment_more: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + bl .save_nvgprs + INTS_RESTORE_HARD + bl .alignment_exception + b .ret_from_except + +/* + * We branch here from entry_64.S for the last stage of the exception + * return code path. MSR:EE is expected to be off at that point + */ +_GLOBAL(exception_return_book3e) + b 1f + +/* This is the return from load_up_fpu fast path which could do with + * less GPR restores in fact, but for now we have a single return path + */ + .globl fast_exception_return +fast_exception_return: + wrteei 0 +1: mr r0,r13 + ld r10,_MSR(r1) + REST_4GPRS(2, r1) + andi. r6,r10,MSR_PR + REST_2GPRS(6, r1) + beq 1f + ACCOUNT_CPU_USER_EXIT(r10, r11) + ld r0,GPR13(r1) + +1: stdcx. r0,0,r1 /* to clear the reservation */ + + ld r8,_CCR(r1) + ld r9,_LINK(r1) + ld r10,_CTR(r1) + ld r11,_XER(r1) + mtcr r8 + mtlr r9 + mtctr r10 + mtxer r11 + REST_2GPRS(8, r1) + ld r10,GPR10(r1) + ld r11,GPR11(r1) + ld r12,GPR12(r1) + mtspr SPRN_SPRG_GEN_SCRATCH,r0 + + std r10,PACA_EXGEN+EX_R10(r13); + std r11,PACA_EXGEN+EX_R11(r13); + ld r10,_NIP(r1) + ld r11,_MSR(r1) + ld r0,GPR0(r1) + ld r1,GPR1(r1) + mtspr SPRN_SRR0,r10 + mtspr SPRN_SRR1,r11 + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + mfspr r13,SPRN_SPRG_GEN_SCRATCH + rfi + +/* + * Trampolines used when spotting a bad kernel stack pointer in + * the exception entry code. + * + * TODO: move some bits like SRR0 read to trampoline, pass PACA + * index around, etc... to handle crit & mcheck + */ +BAD_STACK_TRAMPOLINE(0x000) +BAD_STACK_TRAMPOLINE(0x100) +BAD_STACK_TRAMPOLINE(0x200) +BAD_STACK_TRAMPOLINE(0x300) +BAD_STACK_TRAMPOLINE(0x400) +BAD_STACK_TRAMPOLINE(0x500) +BAD_STACK_TRAMPOLINE(0x600) +BAD_STACK_TRAMPOLINE(0x700) +BAD_STACK_TRAMPOLINE(0x800) +BAD_STACK_TRAMPOLINE(0x900) +BAD_STACK_TRAMPOLINE(0x980) +BAD_STACK_TRAMPOLINE(0x9f0) +BAD_STACK_TRAMPOLINE(0xa00) +BAD_STACK_TRAMPOLINE(0xb00) +BAD_STACK_TRAMPOLINE(0xc00) +BAD_STACK_TRAMPOLINE(0xd00) +BAD_STACK_TRAMPOLINE(0xe00) +BAD_STACK_TRAMPOLINE(0xf00) +BAD_STACK_TRAMPOLINE(0xf20) + + .globl bad_stack_book3e +bad_stack_book3e: + /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ + mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */ + ld r1,PACAEMERGSP(r13) + subi r1,r1,64+INT_FRAME_SIZE + std r10,_NIP(r1) + std r11,_MSR(r1) + ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */ + lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */ + std r10,GPR1(r1) + std r11,_CCR(r1) + mfspr r10,SPRN_DEAR + mfspr r11,SPRN_ESR + std r10,_DAR(r1) + std r11,_DSISR(r1) + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \ + ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + mflr r10 + mfctr r11 + mfxer r12 + std r10,_LINK(r1) + std r11,_CTR(r1) + std r12,_XER(r1) + SAVE_10GPRS(14,r1) + SAVE_8GPRS(24,r1) + lhz r12,PACA_TRAP_SAVE(r13) + std r12,_TRAP(r1) + addi r11,r1,INT_FRAME_SIZE + std r11,0(r1) + li r12,0 + std r12,0(r11) + ld r2,PACATOC(r13) +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .kernel_bad_stack + b 1b + +/* + * Setup the initial TLB for a core. This current implementation + * assume that whatever we are running off will not conflict with + * the new mapping at PAGE_OFFSET. + */ +_GLOBAL(initial_tlb_book3e) + + /* Look for the first TLB with IPROT set */ + mfspr r4,SPRN_TLB0CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(0)@h + bne found_iprot + + mfspr r4,SPRN_TLB1CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(1)@h + bne found_iprot + + mfspr r4,SPRN_TLB2CFG + andi. r3,r4,TLBnCFG_IPROT + lis r3,MAS0_TLBSEL(2)@h + bne found_iprot + + lis r3,MAS0_TLBSEL(3)@h + mfspr r4,SPRN_TLB3CFG + /* fall through */ + +found_iprot: + andi. r5,r4,TLBnCFG_HES + bne have_hes + + mflr r8 /* save LR */ +/* 1. Find the index of the entry we're executing in + * + * r3 = MAS0_TLBSEL (for the iprot array) + * r4 = SPRN_TLBnCFG + */ + bl invstr /* Find our address */ +invstr: mflr r6 /* Make it accessible */ + mfmsr r7 + rlwinm r5,r7,27,31,31 /* extract MSR[IS] */ + mfspr r7,SPRN_PID + slwi r7,r7,16 + or r7,r7,r5 + mtspr SPRN_MAS6,r7 + tlbsx 0,r6 /* search MSR[IS], SPID=PID */ + + mfspr r3,SPRN_MAS0 + rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */ + + mfspr r7,SPRN_MAS1 /* Insure IPROT set */ + oris r7,r7,MAS1_IPROT@h + mtspr SPRN_MAS1,r7 + tlbwe + +/* 2. Invalidate all entries except the entry we're executing in + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in + * r4 = SPRN_TLBnCFG + * r5 = ESEL of entry we are running in + */ + andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */ + li r6,0 /* Set Entry counter to 0 */ +1: mr r7,r3 /* Set MAS0(TLBSEL) */ + rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ + mtspr SPRN_MAS0,r7 + tlbre + mfspr r7,SPRN_MAS1 + rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ + cmpw r5,r6 + beq skpinv /* Dont update the current execution TLB */ + mtspr SPRN_MAS1,r7 + tlbwe + isync +skpinv: addi r6,r6,1 /* Increment */ + cmpw r6,r4 /* Are we done? */ + bne 1b /* If not, repeat */ + + /* Invalidate all TLBs */ + PPC_TLBILX_ALL(0,0) + sync + isync + +/* 3. Setup a temp mapping and jump to it + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in + * r5 = ESEL of entry we are running in + */ + andi. r7,r5,0x1 /* Find an entry not used and is non-zero */ + addi r7,r7,0x1 + mr r4,r3 /* Set MAS0(TLBSEL) = 1 */ + mtspr SPRN_MAS0,r4 + tlbre + + rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */ + mtspr SPRN_MAS0,r4 + + mfspr r7,SPRN_MAS1 + xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */ + mtspr SPRN_MAS1,r6 + + tlbwe + + mfmsr r6 + xori r6,r6,MSR_IS + mtspr SPRN_SRR1,r6 + bl 1f /* Find our address */ +1: mflr r6 + addi r6,r6,(2f - 1b) + mtspr SPRN_SRR0,r6 + rfi +2: + +/* 4. Clear out PIDs & Search info + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + li r6,0 + mtspr SPRN_MAS6,r6 + mtspr SPRN_PID,r6 + +/* 5. Invalidate mapping we started in + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + mtspr SPRN_MAS0,r3 + tlbre + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ + mtspr SPRN_MAS1,r6 + tlbwe + + /* Invalidate TLB1 */ + PPC_TLBILX_ALL(0,0) + sync + isync + +/* The mapping only needs to be cache-coherent on SMP */ +#ifdef CONFIG_SMP +#define M_IF_SMP MAS2_M +#else +#define M_IF_SMP 0 +#endif + +/* 6. Setup KERNELBASE mapping in TLB[0] + * + * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + * r5 = MAS3 + */ + rlwinm r3,r3,0,16,3 /* clear ESEL */ + mtspr SPRN_MAS0,r3 + lis r6,(MAS1_VALID|MAS1_IPROT)@h + ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l + mtspr SPRN_MAS1,r6 + + LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP) + mtspr SPRN_MAS2,r6 + + rlwinm r5,r5,0,0,25 + ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS3,r5 + li r5,-1 + rlwinm r5,r5,0,0,25 + + tlbwe + +/* 7. Jump to KERNELBASE mapping + * + * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping + */ + /* Now we branch the new virtual address mapped by this entry */ + LOAD_REG_IMMEDIATE(r6,2f) + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l + mtspr SPRN_SRR0,r6 + mtspr SPRN_SRR1,r7 + rfi /* start execution out of TLB1[0] entry */ +2: + +/* 8. Clear out the temp mapping + * + * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in + */ + mtspr SPRN_MAS0,r4 + tlbre + mfspr r5,SPRN_MAS1 + rlwinm r5,r5,0,2,0 /* clear IPROT */ + mtspr SPRN_MAS1,r5 + tlbwe + + /* Invalidate TLB1 */ + PPC_TLBILX_ALL(0,0) + sync + isync + + /* We translate LR and return */ + tovirt(r8,r8) + mtlr r8 + blr + +have_hes: + /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the + * kernel linear mapping. We also set MAS8 once for all here though + * that will have to be made dependent on whether we are running under + * a hypervisor I suppose. + */ + ori r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS + mtspr SPRN_MAS0,r3 + lis r3,(MAS1_VALID | MAS1_IPROT)@h + ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT + mtspr SPRN_MAS1,r3 + LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M) + mtspr SPRN_MAS2,r3 + li r3,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS7_MAS3,r3 + li r3,0 + mtspr SPRN_MAS8,r3 + + /* Write the TLB entry */ + tlbwe + + /* Now we branch the new virtual address mapped by this entry */ + LOAD_REG_IMMEDIATE(r3,1f) + mtctr r3 + bctr + +1: /* We are now running at PAGE_OFFSET, clean the TLB of everything + * else (XXX we should scan for bolted crap from the firmware too) + */ + PPC_TLBILX(0,0,0) + sync + isync + + /* We translate LR and return */ + mflr r3 + tovirt(r3,r3) + mtlr r3 + blr + +/* + * Main entry (boot CPU, thread 0) + * + * We enter here from head_64.S, possibly after the prom_init trampoline + * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits + * mode. Anything else is as it was left by the bootloader + * + * Initial requirements of this port: + * + * - Kernel loaded at 0 physical + * - A good lump of memory mapped 0:0 by UTLB entry 0 + * - MSR:IS & MSR:DS set to 0 + * + * Note that some of the above requirements will be relaxed in the future + * as the kernel becomes smarter at dealing with different initial conditions + * but for now you have to be careful + */ +_GLOBAL(start_initialization_book3e) + mflr r28 + + /* First, we need to setup some initial TLBs to map the kernel + * text, data and bss at PAGE_OFFSET. We don't have a real mode + * and always use AS 0, so we just set it up to match our link + * address and never use 0 based addresses. + */ + bl .initial_tlb_book3e + + /* Init global core bits */ + bl .init_core_book3e + + /* Init per-thread bits */ + bl .init_thread_book3e + + /* Return to common init code */ + tovirt(r28,r28) + mtlr r28 + blr + + +/* + * Secondary core/processor entry + * + * This is entered for thread 0 of a secondary core, all other threads + * are expected to be stopped. It's similar to start_initialization_book3e + * except that it's generally entered from the holding loop in head_64.S + * after CPUs have been gathered by Open Firmware. + * + * We assume we are in 32 bits mode running with whatever TLB entry was + * set for us by the firmware or POR engine. + */ +_GLOBAL(book3e_secondary_core_init_tlb_set) + li r4,1 + b .generic_secondary_smp_init + +_GLOBAL(book3e_secondary_core_init) + mflr r28 + + /* Do we need to setup initial TLB entry ? */ + cmplwi r4,0 + bne 2f + + /* Setup TLB for this core */ + bl .initial_tlb_book3e + + /* We can return from the above running at a different + * address, so recalculate r2 (TOC) + */ + bl .relative_toc + + /* Init global core bits */ +2: bl .init_core_book3e + + /* Init per-thread bits */ +3: bl .init_thread_book3e + + /* Return to common init code at proper virtual address. + * + * Due to various previous assumptions, we know we entered this + * function at either the final PAGE_OFFSET mapping or using a + * 1:1 mapping at 0, so we don't bother doing a complicated check + * here, we just ensure the return address has the right top bits. + * + * Note that if we ever want to be smarter about where we can be + * started from, we have to be careful that by the time we reach + * the code below we may already be running at a different location + * than the one we were called from since initial_tlb_book3e can + * have moved us already. + */ + cmpdi cr0,r28,0 + blt 1f + lis r3,PAGE_OFFSET@highest + sldi r3,r3,32 + or r28,r28,r3 +1: mtlr r28 + blr + +_GLOBAL(book3e_secondary_thread_init) + mflr r28 + b 3b + +_STATIC(init_core_book3e) + /* Establish the interrupt vector base */ + LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e) + mtspr SPRN_IVPR,r3 + sync + blr + +_STATIC(init_thread_book3e) + lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h + mtspr SPRN_EPCR,r3 + + /* Make sure interrupts are off */ + wrteei 0 + + /* disable all timers and clear out status */ + li r3,0 + mtspr SPRN_TCR,r3 + mfspr r3,SPRN_TSR + mtspr SPRN_TSR,r3 + + blr + +_GLOBAL(__setup_base_ivors) + SET_IVOR(0, 0x020) /* Critical Input */ + SET_IVOR(1, 0x000) /* Machine Check */ + SET_IVOR(2, 0x060) /* Data Storage */ + SET_IVOR(3, 0x080) /* Instruction Storage */ + SET_IVOR(4, 0x0a0) /* External Input */ + SET_IVOR(5, 0x0c0) /* Alignment */ + SET_IVOR(6, 0x0e0) /* Program */ + SET_IVOR(7, 0x100) /* FP Unavailable */ + SET_IVOR(8, 0x120) /* System Call */ + SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ + SET_IVOR(10, 0x160) /* Decrementer */ + SET_IVOR(11, 0x180) /* Fixed Interval Timer */ + SET_IVOR(12, 0x1a0) /* Watchdog Timer */ + SET_IVOR(13, 0x1c0) /* Data TLB Error */ + SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ + SET_IVOR(15, 0x040) /* Debug */ + + sync + + blr diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 8ac85e08ffa..1808876edcc 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -12,6 +12,8 @@ * */ +#include <asm/exception-64s.h> + /* * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code @@ -22,18 +24,6 @@ * 0x8000 - : Early init and support code */ - -/* - * SPRG Usage - * - * Register Definition - * - * SPRG0 reserved for hypervisor - * SPRG1 temp - used to save gpr - * SPRG2 temp - used to save gpr - * SPRG3 virt addr of paca - */ - /* * This is the start of the interrupt handlers for pSeries * This code runs with relocation off. @@ -51,34 +41,44 @@ __start_interrupts: . = 0x200 _machine_check_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) . = 0x300 .globl data_access_pSeries data_access_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 + mtspr SPRN_SPRG_SCRATCH0,r13 BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c + mfspr r13,SPRN_SPRG_PACA + std r9,PACA_EXSLB+EX_R9(r13) + std r10,PACA_EXSLB+EX_R10(r13) + mfspr r10,SPRN_DAR + mfspr r9,SPRN_DSISR + srdi r10,r10,60 + rlwimi r10,r9,16,0x20 + mfcr r9 + cmpwi r10,0x2c beq do_stab_bolted_pSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + ld r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + ld r11,PACA_EXSLB+EX_R9(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r12,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R13(r13) + EXCEPTION_PROLOG_PSERIES_1(data_access_common) +FTR_SECTION_ELSE EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB) . = 0x380 .globl data_access_slb_pSeries data_access_slb_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ @@ -91,7 +91,7 @@ data_access_slb_pSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ #ifndef CONFIG_RELOCATABLE @@ -115,8 +115,8 @@ data_access_slb_pSeries: .globl instruction_access_slb_pSeries instruction_access_slb_pSeries: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 + mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ @@ -129,7 +129,7 @@ instruction_access_slb_pSeries: std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 + mfspr r10,SPRN_SPRG_SCRATCH0 std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ #ifndef CONFIG_RELOCATABLE @@ -159,7 +159,7 @@ BEGIN_FTR_SECTION beq- 1f END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) mr r9,r13 - mfspr r13,SPRN_SPRG3 + mfspr r13,SPRN_SPRG_PACA mfspr r11,SPRN_SRR0 ld r12,PACAKBASE(r13) ld r10,PACAKMSR(r13) @@ -228,15 +228,17 @@ masked_interrupt: rotldi r10,r10,16 mtspr SPRN_SRR1,r10 ld r10,PACA_EXGEN+EX_R10(r13) - mfspr r13,SPRN_SPRG1 + mfspr r13,SPRN_SPRG_SCRATCH0 rfid b . .align 7 do_stab_bolted_pSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG_SCRATCH0 + std r10,PACA_EXSLB+EX_R13(r13) + EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted) #ifdef CONFIG_PPC_PSERIES /* @@ -246,14 +248,14 @@ do_stab_bolted_pSeries: .align 7 system_reset_fwnmi: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi .align 7 machine_check_fwnmi: HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ + mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) #endif /* CONFIG_PPC_PSERIES */ @@ -268,7 +270,7 @@ slb_miss_user_pseries: std r10,PACA_EXGEN+EX_R10(r13) std r11,PACA_EXGEN+EX_R11(r13) std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 + mfspr r10,SPRG_SCRATCH0 ld r11,PACA_EXSLB+EX_R9(r13) ld r12,PACA_EXSLB+EX_R3(r13) std r10,PACA_EXGEN+EX_R13(r13) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 2436df33c6f..fc8f5b14019 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -91,7 +91,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif /* CONFIG_SMP */ /* enable use of FP after return */ #ifdef CONFIG_PPC32 - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ lwz r4,THREAD_FPEXC_MODE(r5) ori r9,r9,MSR_FP /* enable FP for current */ or r9,r9,r4 diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index fc213294275..829c3fe7c5a 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -244,8 +244,8 @@ __secondary_hold_acknowledge: * task's thread_struct. */ #define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; \ - mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG_SCRATCH0,r10; \ + mtspr SPRN_SPRG_SCRATCH1,r11; \ mfcr r10; \ EXCEPTION_PROLOG_1; \ EXCEPTION_PROLOG_2 @@ -255,7 +255,7 @@ __secondary_hold_acknowledge: andi. r11,r11,MSR_PR; \ tophys(r11,r1); /* use tophys(r1) if kernel */ \ beq 1f; \ - mfspr r11,SPRN_SPRG3; \ + mfspr r11,SPRN_SPRG_THREAD; \ lwz r11,THREAD_INFO-THREAD(r11); \ addi r11,r11,THREAD_SIZE; \ tophys(r11,r11); \ @@ -267,9 +267,9 @@ __secondary_hold_acknowledge: stw r10,_CCR(r11); /* save registers */ \ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ @@ -355,11 +355,11 @@ i##n: \ * -- paulus. */ . = 0x200 - mtspr SPRN_SPRG0,r10 - mtspr SPRN_SPRG1,r11 + mtspr SPRN_SPRG_SCRATCH0,r10 + mtspr SPRN_SPRG_SCRATCH1,r11 mfcr r10 #ifdef CONFIG_PPC_CHRP - mfspr r11,SPRN_SPRG2 + mfspr r11,SPRN_SPRG_RTAS cmpwi 0,r11,0 bne 7f #endif /* CONFIG_PPC_CHRP */ @@ -367,7 +367,7 @@ i##n: \ 7: EXCEPTION_PROLOG_2 addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_CHRP - mfspr r4,SPRN_SPRG2 + mfspr r4,SPRN_SPRG_RTAS cmpwi cr1,r4,0 bne cr1,1f #endif @@ -485,7 +485,7 @@ InstructionTLBMiss: mfspr r3,SPRN_IMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ lwz r2,PGDIR(r2) bge- 112f @@ -559,7 +559,7 @@ DataLoadTLBMiss: mfspr r3,SPRN_DMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ lwz r2,PGDIR(r2) bge- 112f @@ -598,12 +598,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtcrf 0x80,r2 BEGIN_MMU_FTR_SECTION li r0,1 - mfspr r1,SPRN_SPRG4 + mfspr r1,SPRN_SPRG_603_LRU rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ slw r0,r0,r2 xor r1,r0,r1 srw r0,r1,r2 - mtspr SPRN_SPRG4,r1 + mtspr SPRN_SPRG_603_LRU,r1 mfspr r2,SPRN_SRR1 rlwimi r2,r0,31-14,14,14 mtspr SPRN_SRR1,r2 @@ -643,7 +643,7 @@ DataStoreTLBMiss: mfspr r3,SPRN_DMISS lis r1,PAGE_OFFSET@h /* check if kernel address */ cmplw 0,r1,r3 - mfspr r2,SPRN_SPRG3 + mfspr r2,SPRN_SPRG_THREAD li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */ lwz r2,PGDIR(r2) bge- 112f @@ -678,12 +678,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) mtcrf 0x80,r2 BEGIN_MMU_FTR_SECTION li r0,1 - mfspr r1,SPRN_SPRG4 + mfspr r1,SPRN_SPRG_603_LRU rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ slw r0,r0,r2 xor r1,r0,r1 srw r0,r1,r2 - mtspr SPRN_SPRG4,r1 + mtspr SPRN_SPRG_603_LRU,r1 mfspr r2,SPRN_SRR1 rlwimi r2,r0,31-14,14,14 mtspr SPRN_SRR1,r2 @@ -864,9 +864,9 @@ __secondary_start: tophys(r4,r2) addi r4,r4,THREAD /* phys address of our thread_struct */ CLR_TOP32(r4) - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 - mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */ + mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */ /* enable MMU and jump to start_secondary */ li r4,MSR_KERNEL @@ -947,9 +947,9 @@ start_here: tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ CLR_TOP32(r4) - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 - mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */ + mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */ /* stack */ lis r1,init_thread_union@ha diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 0c96911d429..a90625f9b48 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -103,21 +103,21 @@ _ENTRY(saved_ksp_limit) /* * Exception vector entry code. This code runs with address translation - * turned off (i.e. using physical addresses). We assume SPRG3 has the - * physical address of the current task thread_struct. + * turned off (i.e. using physical addresses). We assume SPRG_THREAD has + * the physical address of the current task thread_struct. * Note that we have to have decremented r1 before we write to any fields * of the exception frame, since a critical interrupt could occur at any * time, and it will write to the area immediately below the current r1. */ #define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG2,r1; \ + mtspr SPRN_SPRG_SCRATCH0,r10; /* save two registers to work with */\ + mtspr SPRN_SPRG_SCRATCH1,r11; \ + mtspr SPRN_SPRG_SCRATCH2,r1; \ mfcr r10; /* save CR in r10 for now */\ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ beq 1f; \ - mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ addi r1,r1,THREAD_SIZE; \ 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ @@ -125,13 +125,13 @@ _ENTRY(saved_ksp_limit) stw r10,_CCR(r11); /* save various registers */\ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ - mfspr r10,SPRN_SPRG2; \ + mfspr r10,SPRN_SPRG_SCRATCH2; \ mfspr r12,SPRN_SRR0; \ stw r10,GPR1(r11); \ mfspr r9,SPRN_SRR1; \ @@ -160,7 +160,7 @@ _ENTRY(saved_ksp_limit) lwz r11,critirq_ctx@l(r11); \ beq 1f; \ /* COMING FROM USER MODE */ \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ 1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\ tophys(r11,r11); \ @@ -265,8 +265,8 @@ label: * and exit. Otherwise, we call heavywight functions to do the work. */ START_EXCEPTION(0x0300, DataStorage) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -275,12 +275,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif /* First, check if it was a zone fault (which means a user @@ -308,7 +308,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -355,15 +355,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 PPC405_ERR77_SYNC rfi /* Should sync shadow TLBs */ b . /* prevent prefetch past rfi */ @@ -380,15 +380,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b DataAccess /* @@ -466,8 +466,8 @@ label: * load TLB entries from the page table if they exist. */ START_EXCEPTION(0x1100, DTLBMiss) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -476,12 +476,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif mfspr r10, SPRN_DEAR /* Get faulting address */ @@ -500,7 +500,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -550,15 +550,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b DataAccess /* 0x1200 - Instruction TLB Miss Exception @@ -566,8 +566,8 @@ label: * registers and bailout to a different point. */ START_EXCEPTION(0x1200, ITLBMiss) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 + mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_SCRATCH1, r11 #ifdef CONFIG_403GCX stw r12, 0(r0) stw r9, 4(r0) @@ -576,12 +576,12 @@ label: stw r11, 8(r0) stw r12, 12(r0) #else - mtspr SPRN_SPRG4, r12 - mtspr SPRN_SPRG5, r9 + mtspr SPRN_SPRG_SCRATCH3, r12 + mtspr SPRN_SPRG_SCRATCH4, r9 mfcr r11 mfspr r12, SPRN_PID - mtspr SPRN_SPRG7, r11 - mtspr SPRN_SPRG6, r12 + mtspr SPRN_SPRG_SCRATCH6, r11 + mtspr SPRN_SPRG_SCRATCH5, r12 #endif mfspr r10, SPRN_SRR0 /* Get faulting address */ @@ -600,7 +600,7 @@ label: /* Get the PGD for the current thread. */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: tophys(r11, r11) @@ -650,15 +650,15 @@ label: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 b InstructionAccess EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE) @@ -803,15 +803,15 @@ finish_tlb_load: lwz r9, 4(r0) lwz r12, 0(r0) #else - mfspr r12, SPRN_SPRG6 - mfspr r11, SPRN_SPRG7 + mfspr r12, SPRN_SPRG_SCRATCH5 + mfspr r11, SPRN_SPRG_SCRATCH6 mtspr SPRN_PID, r12 mtcr r11 - mfspr r9, SPRN_SPRG5 - mfspr r12, SPRN_SPRG4 + mfspr r9, SPRN_SPRG_SCRATCH4 + mfspr r12, SPRN_SPRG_SCRATCH3 #endif - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 PPC405_ERR77_SYNC rfi /* Should sync shadow TLBs */ b . /* prevent prefetch past rfi */ @@ -835,7 +835,7 @@ start_here: /* ptr to phys current thread */ tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@ha diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 18d8a1677c4..711368b993f 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -239,7 +239,7 @@ skpinv: addi r4,r4,1 /* Increment */ /* ptr to current thread */ addi r4,r2,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@h @@ -350,12 +350,12 @@ interrupt_base: /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -374,7 +374,7 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) /* Load PID into MMUCR TID */ @@ -446,12 +446,12 @@ tlb_44x_patch_hwater_D: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b DataStorage /* Instruction TLB Error Interrupt */ @@ -461,12 +461,12 @@ tlb_44x_patch_hwater_D: * to a different point. */ START_EXCEPTION(InstructionTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -485,7 +485,7 @@ tlb_44x_patch_hwater_D: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) /* Load PID into MMUCR TID */ @@ -497,7 +497,7 @@ tlb_44x_patch_hwater_D: mtspr SPRN_MMUCR,r12 /* Make up the required permissions */ - li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC + li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC /* Compute pgdir/pmd offset */ rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29 @@ -542,12 +542,12 @@ tlb_44x_patch_hwater_I: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage /* Debug Interrupt */ @@ -593,12 +593,12 @@ finish_tlb_load: /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ /* diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 012505ebd9f..c38afdb45d7 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -36,7 +36,6 @@ #include <asm/thread_info.h> #include <asm/firmware.h> #include <asm/page_64.h> -#include <asm/exception.h> #include <asm/irqflags.h> /* The physical memory is layed out such that the secondary processor @@ -122,10 +121,11 @@ __run_at_load: */ .globl __secondary_hold __secondary_hold: +#ifndef CONFIG_PPC_BOOK3E mfmsr r24 ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - +#endif /* Grab our physical cpu number */ mr r24,r3 @@ -144,6 +144,7 @@ __secondary_hold: ld r4,0(r4) /* deref function descriptor */ mtctr r4 mr r3,r24 + li r4,0 bctr #else BUG_OPCODE @@ -164,21 +165,49 @@ exception_marker: #include "exceptions-64s.S" #endif +_GLOBAL(generic_secondary_thread_init) + mr r24,r3 + + /* turn on 64-bit mode */ + bl .enable_64b_mode + + /* get a valid TOC pointer, wherever we're mapped at */ + bl .relative_toc + +#ifdef CONFIG_PPC_BOOK3E + /* Book3E initialization */ + mr r3,r24 + bl .book3e_secondary_thread_init +#endif + b generic_secondary_common_init /* * On pSeries and most other platforms, secondary processors spin * in the following code. * At entry, r3 = this processor's number (physical cpu id) + * + * On Book3E, r4 = 1 to indicate that the initial TLB entry for + * this core already exists (setup via some other mechanism such + * as SCOM before entry). */ _GLOBAL(generic_secondary_smp_init) mr r24,r3 - + mr r25,r4 + /* turn on 64-bit mode */ bl .enable_64b_mode - /* get the TOC pointer (real address) */ + /* get a valid TOC pointer, wherever we're mapped at */ bl .relative_toc +#ifdef CONFIG_PPC_BOOK3E + /* Book3E initialization */ + mr r3,r24 + mr r4,r25 + bl .book3e_secondary_core_init +#endif + +generic_secondary_common_init: /* Set up a paca value for this processor. Since we have the * physical cpu id in r24, we need to search the pacas to find * which logical id maps to our physical one. @@ -196,7 +225,12 @@ _GLOBAL(generic_secondary_smp_init) mr r3,r24 /* not found, copy phys to r3 */ b .kexec_wait /* next kernel might do better */ -2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ +2: mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG */ +#ifdef CONFIG_PPC_BOOK3E + addi r12,r13,PACA_EXTLB /* and TLB exc frame in another */ + mtspr SPRN_SPRG_TLB_EXFRAME,r12 +#endif + /* From now on, r24 is expected to be logical cpuid */ mr r24,r5 3: HMT_LOW @@ -232,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init) * Turn the MMU off. * Assumes we're mapped EA == RA if the MMU is on. */ +#ifdef CONFIG_PPC_BOOK3S _STATIC(__mmu_off) mfmsr r3 andi. r0,r3,MSR_IR|MSR_DR @@ -243,6 +278,7 @@ _STATIC(__mmu_off) sync rfid b . /* prevent speculative execution */ +#endif /* @@ -280,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform) mr r31,r3 mr r30,r4 +#ifdef CONFIG_PPC_BOOK3E + bl .start_initialization_book3e + b .__after_prom_start +#else /* Setup some critical 970 SPRs before switching MMU off */ mfspr r0,SPRN_PVR srwi r0,r0,16 @@ -297,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform) /* Switch off MMU if not already off */ bl .__mmu_off b .__after_prom_start +#endif /* CONFIG_PPC_BOOK3E */ _INIT_STATIC(__boot_from_prom) #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE @@ -359,10 +400,16 @@ _STATIC(__after_prom_start) * Note: This process overwrites the OF exception vectors. */ li r3,0 /* target addr */ +#ifdef CONFIG_PPC_BOOK3E + tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */ +#endif mr. r4,r26 /* In some cases the loader may */ beq 9f /* have already put us at zero */ li r6,0x100 /* Start offset, the first 0x100 */ /* bytes were copied earlier. */ +#ifdef CONFIG_PPC_BOOK3E + tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */ +#endif #ifdef CONFIG_CRASH_DUMP /* @@ -485,7 +532,7 @@ _GLOBAL(pmac_secondary_start) LOAD_REG_ADDR(r4,paca) /* Get base vaddr of paca array */ mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */ add r13,r13,r4 /* for this processor. */ - mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ + mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG*/ /* Create a temp kernel stack for use before relocation is on. */ ld r1,PACAEMERGSP(r13) @@ -503,11 +550,14 @@ _GLOBAL(pmac_secondary_start) * 1. Processor number * 2. Segment table pointer (virtual address) * On entry the following are set: - * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries - * r24 = cpu# (in Linux terms) - * r13 = paca virtual address - * SPRG3 = paca virtual address + * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries + * r24 = cpu# (in Linux terms) + * r13 = paca virtual address + * SPRG_PACA = paca virtual address */ + .section ".text"; + .align 2 ; + .globl __secondary_start __secondary_start: /* Set thread priority to MEDIUM */ @@ -544,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI b . /* prevent speculative execution */ /* @@ -565,11 +615,16 @@ _GLOBAL(start_secondary_prolog) */ _GLOBAL(enable_64b_mode) mfmsr r11 /* grab the current MSR */ +#ifdef CONFIG_PPC_BOOK3E + oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */ + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ li r12,(MSR_SF | MSR_ISF)@highest sldi r12,r12,48 or r11,r11,r12 mtmsrd r11 isync +#endif blr /* @@ -613,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform) bdnz 3b 4: +#ifndef CONFIG_PPC_BOOK3E mfmsr r6 ori r6,r6,MSR_RI mtmsrd r6 /* RI on */ +#endif #ifdef CONFIG_RELOCATABLE /* Save the physical address we're running at in kernstart_addr */ @@ -642,13 +699,13 @@ _INIT_STATIC(start_here_multiplatform) /* Restore parameters passed from prom_init/kexec */ mr r3,r31 - bl .early_setup /* also sets r13 and SPRG3 */ + bl .early_setup /* also sets r13 and SPRG_PACA */ LOAD_REG_ADDR(r3, .start_here_common) ld r4,PACAKMSR(r13) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI b . /* prevent speculative execution */ /* This is where all platforms converge execution */ diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 52ff8c53b93..6ded19d0189 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -110,8 +110,8 @@ turn_on_mmu: * task's thread_struct. */ #define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; \ - mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG_SCRATCH0,r10; \ + mtspr SPRN_SPRG_SCRATCH1,r11; \ mfcr r10; \ EXCEPTION_PROLOG_1; \ EXCEPTION_PROLOG_2 @@ -121,7 +121,7 @@ turn_on_mmu: andi. r11,r11,MSR_PR; \ tophys(r11,r1); /* use tophys(r1) if kernel */ \ beq 1f; \ - mfspr r11,SPRN_SPRG3; \ + mfspr r11,SPRN_SPRG_THREAD; \ lwz r11,THREAD_INFO-THREAD(r11); \ addi r11,r11,THREAD_SIZE; \ tophys(r11,r11); \ @@ -133,9 +133,9 @@ turn_on_mmu: stw r10,_CCR(r11); /* save registers */ \ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_SCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ @@ -603,8 +603,9 @@ start_here: /* ptr to phys current thread */ tophys(r4,r2) addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 li r3,0 + /* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */ mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */ /* stack */ diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index 5f9febc8d14..50504ae39cb 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -20,14 +20,14 @@ #endif #define NORMAL_EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ - mtspr SPRN_SPRG1,r11; \ - mtspr SPRN_SPRG4W,r1; \ + mtspr SPRN_SPRG_WSCRATCH0,r10;/* save two registers to work with */\ + mtspr SPRN_SPRG_WSCRATCH1,r11; \ + mtspr SPRN_SPRG_WSCRATCH2,r1; \ mfcr r10; /* save CR in r10 for now */\ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ beq 1f; \ - mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ ALLOC_STACK_FRAME(r1, THREAD_SIZE); \ 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ @@ -35,13 +35,13 @@ stw r10,_CCR(r11); /* save various registers */\ stw r12,GPR12(r11); \ stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ + mfspr r10,SPRN_SPRG_RSCRATCH0; \ stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ + mfspr r12,SPRN_SPRG_RSCRATCH1; \ stw r12,GPR11(r11); \ mflr r10; \ stw r10,_LINK(r11); \ - mfspr r10,SPRN_SPRG4R; \ + mfspr r10,SPRN_SPRG_RSCRATCH2; \ mfspr r12,SPRN_SRR0; \ stw r10,GPR1(r11); \ mfspr r9,SPRN_SRR1; \ @@ -69,21 +69,11 @@ * providing configurations that micro-optimize space usage. */ -/* CRIT_SPRG only used in critical exception handling */ -#define CRIT_SPRG SPRN_SPRG2 -/* MCHECK_SPRG only used in machine check exception handling */ -#define MCHECK_SPRG SPRN_SPRG6W - -#define MCHECK_STACK_BASE mcheckirq_ctx +#define MC_STACK_BASE mcheckirq_ctx #define CRIT_STACK_BASE critirq_ctx /* only on e500mc/e200 */ -#define DEBUG_STACK_BASE dbgirq_ctx -#ifdef CONFIG_E200 -#define DEBUG_SPRG SPRN_SPRG6W -#else -#define DEBUG_SPRG SPRN_SPRG9 -#endif +#define DBG_STACK_BASE dbgirq_ctx #define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE) @@ -110,7 +100,7 @@ * critical/machine check exception stack at low physical addresses. */ #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \ - mtspr exc_level##_SPRG,r8; \ + mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \ BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ stw r9,GPR9(r8); /* save various registers */\ mfcr r9; /* save CR in r9 for now */\ @@ -119,7 +109,7 @@ stw r9,_CCR(r8); /* save CR on stack */\ mfspr r10,exc_level_srr1; /* check whether user or kernel */\ andi. r10,r10,MSR_PR; \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ + mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\ beq 1f; \ @@ -140,7 +130,7 @@ lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \ stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \ mr r11,r8; \ -2: mfspr r8,exc_level##_SPRG; \ +2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \ stw r12,GPR12(r11); /* save various registers */\ mflr r10; \ stw r10,_LINK(r11); \ @@ -161,9 +151,9 @@ #define CRITICAL_EXCEPTION_PROLOG \ EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1) #define DEBUG_EXCEPTION_PROLOG \ - EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1) + EXC_LEVEL_EXCEPTION_PROLOG(DBG, SPRN_DSRR0, SPRN_DSRR1) #define MCHECK_EXCEPTION_PROLOG \ - EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1) + EXC_LEVEL_EXCEPTION_PROLOG(MC, SPRN_MCSRR0, SPRN_MCSRR1) /* * Exception vectors. @@ -282,13 +272,13 @@ label: mtspr SPRN_DSRR1,r9; \ lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ - mtspr DEBUG_SPRG,r8; \ - BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \ + mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \ lwz r10,GPR10(r8); \ lwz r11,GPR11(r8); \ - mfspr r8,DEBUG_SPRG; \ + mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \ \ - PPC_RFDI; \ + PPC_RFDI; \ b .; \ \ /* continue normal handling for a debug exception... */ \ @@ -335,11 +325,11 @@ label: mtspr SPRN_CSRR1,r9; \ lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ - mtspr CRIT_SPRG,r8; \ + mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \ BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ lwz r10,GPR10(r8); \ lwz r11,GPR11(r8); \ - mfspr r8,CRIT_SPRG; \ + mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \ \ rfci; \ b .; \ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 5bdcc06d294..975788ca05d 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -361,7 +361,7 @@ skpinv: addi r6,r6,1 /* Increment */ /* ptr to current thread */ addi r4,r2,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@h @@ -532,12 +532,12 @@ interrupt_base: /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -557,7 +557,7 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: @@ -575,7 +575,12 @@ interrupt_base: * place or can we save a couple of instructions here ? */ mfspr r12,SPRN_ESR +#ifdef CONFIG_PTE_64BIT + li r13,_PAGE_PRESENT + oris r13,r13,_PAGE_ACCESSED@h +#else li r13,_PAGE_PRESENT|_PAGE_ACCESSED +#endif rlwimi r13,r12,11,29,29 FIND_PTE @@ -598,12 +603,12 @@ interrupt_base: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b DataStorage /* Instruction TLB Error Interrupt */ @@ -613,12 +618,12 @@ interrupt_base: * to a different point. */ START_EXCEPTION(InstructionTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 + mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1, r11 + mtspr SPRN_SPRG_WSCRATCH2, r12 + mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 - mtspr SPRN_SPRG7W, r11 + mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the @@ -638,12 +643,17 @@ interrupt_base: /* Get the PGD for the current thread */ 3: - mfspr r11,SPRN_SPRG3 + mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) 4: /* Make up the required permissions */ - li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC +#ifdef CONFIG_PTE_64BIT + li r13,_PAGE_PRESENT | _PAGE_EXEC + oris r13,r13,_PAGE_ACCESSED@h +#else + li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC +#endif FIND_PTE andc. r13,r13,r11 /* Check permission */ @@ -666,12 +676,12 @@ interrupt_base: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage #ifdef CONFIG_SPE @@ -733,7 +743,7 @@ finish_tlb_load: mfspr r12, SPRN_MAS2 #ifdef CONFIG_PTE_64BIT - rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */ + rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */ #else rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ #endif @@ -742,23 +752,27 @@ finish_tlb_load: #endif mtspr SPRN_MAS2, r12 - li r10, (_PAGE_HWEXEC | _PAGE_PRESENT) - rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */ - and r12, r11, r10 - andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */ - slwi r10, r12, 1 - or r10, r10, r12 - iseleq r12, r12, r10 - #ifdef CONFIG_PTE_64BIT - rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */ - rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */ + rlwinm r12, r11, 32-2, 26, 31 /* Move in perm bits */ + andi. r10, r11, _PAGE_DIRTY + bne 1f + li r10, MAS3_SW | MAS3_UW + andc r12, r12, r10 +1: rlwimi r12, r13, 20, 0, 11 /* grab RPN[32:43] */ + rlwimi r12, r11, 20, 12, 19 /* grab RPN[44:51] */ mtspr SPRN_MAS3, r12 BEGIN_MMU_FTR_SECTION - srwi r10, r13, 8 /* grab RPN[8:31] */ + srwi r10, r13, 12 /* grab RPN[12:31] */ mtspr SPRN_MAS7, r10 END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) #else + li r10, (_PAGE_EXEC | _PAGE_PRESENT) + rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */ + and r12, r11, r10 + andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */ + slwi r10, r12, 1 + or r10, r10, r12 + iseleq r12, r12, r10 rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ mtspr SPRN_MAS3, r11 #endif @@ -790,12 +804,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) tlbwe /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R + mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ #ifdef CONFIG_SPE @@ -839,7 +853,7 @@ load_up_spe: #endif /* !CONFIG_SMP */ /* enable use of SPE after return */ oris r9,r9,MSR_SPE@h - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ li r4,1 li r10,THREAD_ACC stw r4,THREAD_USED_SPE(r5) @@ -1118,7 +1132,7 @@ __secondary_start: /* ptr to current thread */ addi r4,r2,THREAD /* address of our thread_struct */ - mtspr SPRN_SPRG3,r4 + mtspr SPRN_SPRG_THREAD,r4 /* Setup the defaults for TLB entries */ li r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 6e3f6249365..a4c8b38b0ba 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -127,7 +127,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask) return 1; } -static struct dma_mapping_ops ibmebus_dma_ops = { +static struct dma_map_ops ibmebus_dma_ops = { .alloc_coherent = ibmebus_alloc_coherent, .free_coherent = ibmebus_free_coherent, .map_sg = ibmebus_map_sg, diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 2419cc706ff..ed0ac4e4b8d 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -35,6 +35,7 @@ #include <asm/prom.h> #include <asm/vdso_datapage.h> #include <asm/vio.h> +#include <asm/mmu.h> #define MODULE_VERS "1.8" #define MODULE_NAME "lparcfg" @@ -537,6 +538,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) seq_printf(m, "shared_processor_mode=%d\n", lppaca[0].shared_proc); + seq_printf(m, "slb_size=%d\n", mmu_slb_size); + return 0; } diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 15f28e0de78..da9c0c4c10f 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -342,10 +342,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) addi r3,r3,L1_CACHE_BYTES bdnz 1b sync /* wait for dcbst's to get to ram */ +#ifndef CONFIG_44x mtctr r4 2: icbi 0,r6 addi r6,r6,L1_CACHE_BYTES bdnz 2b +#else + /* Flash invalidate on 44x because we are passed kmapped addresses and + this doesn't work for userspace pages due to the virtually tagged + icache. Sigh. */ + iccci 0, r0 +#endif sync /* additional sync needed on g4 */ isync blr diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 87df428e358..1a4fc0d11a0 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -276,7 +276,7 @@ static int __devinit of_pci_phb_probe(struct of_device *dev, #endif /* CONFIG_EEH */ /* Scan the bus */ - scan_phb(phb); + pcibios_scan_phb(phb, dev->node); if (phb->bus == NULL) return -ENXIO; diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index e9962c7f8a0..d16b1ea55d4 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -13,6 +13,7 @@ #include <asm/lppaca.h> #include <asm/paca.h> #include <asm/sections.h> +#include <asm/pgtable.h> /* This symbol is provided by the linker - let it fill in the paca * field correctly */ @@ -87,6 +88,8 @@ void __init initialise_pacas(void) #ifdef CONFIG_PPC_BOOK3S new_paca->lppaca_ptr = &lppaca[cpu]; +#else + new_paca->kernel_pgd = swapper_pg_dir; #endif new_paca->lock_token = 0x8000; new_paca->paca_index = cpu; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 5a56e97c5ac..e9f4840096b 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -50,14 +50,14 @@ resource_size_t isa_mem_base; unsigned int ppc_pci_flags = 0; -static struct dma_mapping_ops *pci_dma_ops = &dma_direct_ops; +static struct dma_map_ops *pci_dma_ops = &dma_direct_ops; -void set_pci_dma_ops(struct dma_mapping_ops *dma_ops) +void set_pci_dma_ops(struct dma_map_ops *dma_ops) { pci_dma_ops = dma_ops; } -struct dma_mapping_ops *get_pci_dma_ops(void) +struct dma_map_ops *get_pci_dma_ops(void) { return pci_dma_ops; } @@ -176,8 +176,6 @@ int pci_domain_nr(struct pci_bus *bus) } EXPORT_SYMBOL(pci_domain_nr); -#ifdef CONFIG_PPC_OF - /* This routine is meant to be used early during boot, when the * PCI bus numbers have not yet been assigned, and you need to * issue PCI config cycles to an OF device. @@ -210,17 +208,11 @@ static ssize_t pci_show_devspec(struct device *dev, return sprintf(buf, "%s", np->full_name); } static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); -#endif /* CONFIG_PPC_OF */ /* Add sysfs properties */ int pcibios_add_platform_entries(struct pci_dev *pdev) { -#ifdef CONFIG_PPC_OF return device_create_file(&pdev->dev, &dev_attr_devspec); -#else - return 0; -#endif /* CONFIG_PPC_OF */ - } char __devinit *pcibios_setup(char *str) @@ -1626,3 +1618,122 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) } +/* + * Null PCI config access functions, for the case when we can't + * find a hose. + */ +#define NULL_PCI_OP(rw, size, type) \ +static int \ +null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ +{ \ + return PCIBIOS_DEVICE_NOT_FOUND; \ +} + +static int +null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int +null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static struct pci_ops null_pci_ops = +{ + .read = null_read_config, + .write = null_write_config, +}; + +/* + * These functions are used early on before PCI scanning is done + * and all of the pci_dev and pci_bus structures have been created. + */ +static struct pci_bus * +fake_pci_bus(struct pci_controller *hose, int busnr) +{ + static struct pci_bus bus; + + if (hose == 0) { + printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); + } + bus.number = busnr; + bus.sysdata = hose; + bus.ops = hose? hose->ops: &null_pci_ops; + return &bus; +} + +#define EARLY_PCI_OP(rw, size, type) \ +int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ + int devfn, int offset, type value) \ +{ \ + return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ + devfn, offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, word, u16 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, word, u16) +EARLY_PCI_OP(write, dword, u32) + +extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); +int early_find_capability(struct pci_controller *hose, int bus, int devfn, + int cap) +{ + return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); +} + +/** + * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus + * @hose: Pointer to the PCI host controller instance structure + * @sysdata: value to use for sysdata pointer. ppc32 and ppc64 differ here + * + * Note: the 'data' pointer is a temporary measure. As 32 and 64 bit + * pci code gets merged, this parameter should become unnecessary because + * both will use the same value. + */ +void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata) +{ + struct pci_bus *bus; + struct device_node *node = hose->dn; + int mode; + + pr_debug("PCI: Scanning PHB %s\n", + node ? node->full_name : "<NO NAME>"); + + /* Create an empty bus for the toplevel */ + bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, + sysdata); + if (bus == NULL) { + pr_err("Failed to create bus for PCI domain %04x\n", + hose->global_number); + return; + } + bus->secondary = hose->first_busno; + hose->bus = bus; + + /* Get some IO space for the new PHB */ + pcibios_setup_phb_io_space(hose); + + /* Wire up PHB bus resources */ + pcibios_setup_phb_resources(hose); + + /* Get probe mode and perform scan */ + mode = PCI_PROBE_NORMAL; + if (node && ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + if (mode == PCI_PROBE_DEVTREE) { + bus->subordinate = hose->last_busno; + of_scan_bus(node, bus); + } + + if (mode == PCI_PROBE_NORMAL) + hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); +} diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 3ae1c666ff9..c13668cf36d 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -34,9 +34,7 @@ int pcibios_assign_bus_offset = 1; void pcibios_make_OF_bus_map(void); static void fixup_cpc710_pci64(struct pci_dev* dev); -#ifdef CONFIG_PPC_OF static u8* pci_to_OF_bus_map; -#endif /* By default, we don't re-assign bus numbers. We do this only on * some pmacs @@ -83,7 +81,6 @@ fixup_cpc710_pci64(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64); -#ifdef CONFIG_PPC_OF /* * Functions below are used on OpenFirmware machines. */ @@ -357,42 +354,15 @@ pci_create_OF_bus_map(void) } } -#else /* CONFIG_PPC_OF */ -void pcibios_make_OF_bus_map(void) +void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose) { -} -#endif /* CONFIG_PPC_OF */ - -static void __devinit pcibios_scan_phb(struct pci_controller *hose) -{ - struct pci_bus *bus; - struct device_node *node = hose->dn; unsigned long io_offset; struct resource *res = &hose->io_resource; - pr_debug("PCI: Scanning PHB %s\n", - node ? node->full_name : "<NO NAME>"); - - /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose); - if (bus == NULL) { - printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", - hose->global_number); - return; - } - bus->secondary = hose->first_busno; - hose->bus = bus; - /* Fixup IO space offset */ io_offset = (unsigned long)hose->io_base_virt - isa_io_base; res->start = (res->start + io_offset) & 0xffffffffu; res->end = (res->end + io_offset) & 0xffffffffu; - - /* Wire up PHB bus resources */ - pcibios_setup_phb_resources(hose); - - /* Scan children */ - hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); } static int __init pcibios_init(void) @@ -410,7 +380,7 @@ static int __init pcibios_init(void) if (pci_assign_all_buses) hose->first_busno = next_busno; hose->last_busno = 0xff; - pcibios_scan_phb(hose); + pcibios_scan_phb(hose, hose); pci_bus_add_devices(hose->bus); if (pci_assign_all_buses || next_busno <= hose->last_busno) next_busno = hose->last_busno + pcibios_assign_bus_offset; @@ -478,75 +448,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) return result; } -/* - * Null PCI config access functions, for the case when we can't - * find a hose. - */ -#define NULL_PCI_OP(rw, size, type) \ -static int \ -null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ -{ \ - return PCIBIOS_DEVICE_NOT_FOUND; \ -} -static int -null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int -null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static struct pci_ops null_pci_ops = -{ - .read = null_read_config, - .write = null_write_config, -}; - -/* - * These functions are used early on before PCI scanning is done - * and all of the pci_dev and pci_bus structures have been created. - */ -static struct pci_bus * -fake_pci_bus(struct pci_controller *hose, int busnr) -{ - static struct pci_bus bus; - - if (hose == 0) { - hose = pci_bus_to_hose(busnr); - if (hose == 0) - printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); - } - bus.number = busnr; - bus.sysdata = hose; - bus.ops = hose? hose->ops: &null_pci_ops; - return &bus; -} - -#define EARLY_PCI_OP(rw, size, type) \ -int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ - int devfn, int offset, type value) \ -{ \ - return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ - devfn, offset, value); \ -} - -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, word, u16 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, word, u16) -EARLY_PCI_OP(write, dword, u32) - -extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); -int early_find_capability(struct pci_controller *hose, int bus, int devfn, - int cap) -{ - return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); -} diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 9e8902fa14c..ba949a2c93a 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -43,334 +43,6 @@ unsigned long pci_probe_only = 1; unsigned long pci_io_base = ISA_IO_BASE; EXPORT_SYMBOL(pci_io_base); -static u32 get_int_prop(struct device_node *np, const char *name, u32 def) -{ - const u32 *prop; - int len; - - prop = of_get_property(np, name, &len); - if (prop && len >= 4) - return *prop; - return def; -} - -static unsigned int pci_parse_of_flags(u32 addr0, int bridge) -{ - unsigned int flags = 0; - - if (addr0 & 0x02000000) { - flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; - flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; - flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; - if (addr0 & 0x40000000) - flags |= IORESOURCE_PREFETCH - | PCI_BASE_ADDRESS_MEM_PREFETCH; - /* Note: We don't know whether the ROM has been left enabled - * by the firmware or not. We mark it as disabled (ie, we do - * not set the IORESOURCE_ROM_ENABLE flag) for now rather than - * do a config space read, it will be force-enabled if needed - */ - if (!bridge && (addr0 & 0xff) == 0x30) - flags |= IORESOURCE_READONLY; - } else if (addr0 & 0x01000000) - flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; - if (flags) - flags |= IORESOURCE_SIZEALIGN; - return flags; -} - - -static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) -{ - u64 base, size; - unsigned int flags; - struct resource *res; - const u32 *addrs; - u32 i; - int proplen; - - addrs = of_get_property(node, "assigned-addresses", &proplen); - if (!addrs) - return; - pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); - for (; proplen >= 20; proplen -= 20, addrs += 5) { - flags = pci_parse_of_flags(addrs[0], 0); - if (!flags) - continue; - base = of_read_number(&addrs[1], 2); - size = of_read_number(&addrs[3], 2); - if (!size) - continue; - i = addrs[0] & 0xff; - pr_debug(" base: %llx, size: %llx, i: %x\n", - (unsigned long long)base, - (unsigned long long)size, i); - - if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { - res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; - } else if (i == dev->rom_base_reg) { - res = &dev->resource[PCI_ROM_RESOURCE]; - flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; - } else { - printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); - continue; - } - res->start = base; - res->end = base + size - 1; - res->flags = flags; - res->name = pci_name(dev); - } -} - -struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn) -{ - struct pci_dev *dev; - const char *type; - - dev = alloc_pci_dev(); - if (!dev) - return NULL; - type = of_get_property(node, "device_type", NULL); - if (type == NULL) - type = ""; - - pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); - - dev->bus = bus; - dev->sysdata = node; - dev->dev.parent = bus->bridge; - dev->dev.bus = &pci_bus_type; - dev->devfn = devfn; - dev->multifunction = 0; /* maybe a lie? */ - - dev->vendor = get_int_prop(node, "vendor-id", 0xffff); - dev->device = get_int_prop(node, "device-id", 0xffff); - dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); - dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); - - dev->cfg_size = pci_cfg_space_size(dev); - - dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), - dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); - dev->class = get_int_prop(node, "class-code", 0); - dev->revision = get_int_prop(node, "revision-id", 0); - - pr_debug(" class: 0x%x\n", dev->class); - pr_debug(" revision: 0x%x\n", dev->revision); - - dev->current_state = 4; /* unknown power state */ - dev->error_state = pci_channel_io_normal; - dev->dma_mask = 0xffffffff; - - if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { - /* a PCI-PCI bridge */ - dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; - dev->rom_base_reg = PCI_ROM_ADDRESS1; - } else if (!strcmp(type, "cardbus")) { - dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; - } else { - dev->hdr_type = PCI_HEADER_TYPE_NORMAL; - dev->rom_base_reg = PCI_ROM_ADDRESS; - /* Maybe do a default OF mapping here */ - dev->irq = NO_IRQ; - } - - pci_parse_of_addrs(node, dev); - - pr_debug(" adding to system ...\n"); - - pci_device_add(dev, bus); - - return dev; -} -EXPORT_SYMBOL(of_create_pci_dev); - -static void __devinit __of_scan_bus(struct device_node *node, - struct pci_bus *bus, int rescan_existing) -{ - struct device_node *child; - const u32 *reg; - int reglen, devfn; - struct pci_dev *dev; - - pr_debug("of_scan_bus(%s) bus no %d... \n", - node->full_name, bus->number); - - /* Scan direct children */ - for_each_child_of_node(node, child) { - pr_debug(" * %s\n", child->full_name); - reg = of_get_property(child, "reg", ®len); - if (reg == NULL || reglen < 20) - continue; - devfn = (reg[0] >> 8) & 0xff; - - /* create a new pci_dev for this device */ - dev = of_create_pci_dev(child, bus, devfn); - if (!dev) - continue; - pr_debug(" dev header type: %x\n", dev->hdr_type); - } - - /* Apply all fixups necessary. We don't fixup the bus "self" - * for an existing bridge that is being rescanned - */ - if (!rescan_existing) - pcibios_setup_bus_self(bus); - pcibios_setup_bus_devices(bus); - - /* Now scan child busses */ - list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || - dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { - struct device_node *child = pci_device_to_OF_node(dev); - if (dev) - of_scan_pci_bridge(child, dev); - } - } -} - -void __devinit of_scan_bus(struct device_node *node, - struct pci_bus *bus) -{ - __of_scan_bus(node, bus, 0); -} -EXPORT_SYMBOL_GPL(of_scan_bus); - -void __devinit of_rescan_bus(struct device_node *node, - struct pci_bus *bus) -{ - __of_scan_bus(node, bus, 1); -} -EXPORT_SYMBOL_GPL(of_rescan_bus); - -void __devinit of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev) -{ - struct pci_bus *bus; - const u32 *busrange, *ranges; - int len, i, mode; - struct resource *res; - unsigned int flags; - u64 size; - - pr_debug("of_scan_pci_bridge(%s)\n", node->full_name); - - /* parse bus-range property */ - busrange = of_get_property(node, "bus-range", &len); - if (busrange == NULL || len != 8) { - printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", - node->full_name); - return; - } - ranges = of_get_property(node, "ranges", &len); - if (ranges == NULL) { - printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", - node->full_name); - return; - } - - bus = pci_add_new_bus(dev->bus, dev, busrange[0]); - if (!bus) { - printk(KERN_ERR "Failed to create pci bus for %s\n", - node->full_name); - return; - } - - bus->primary = dev->bus->number; - bus->subordinate = busrange[1]; - bus->bridge_ctl = 0; - bus->sysdata = node; - - /* parse ranges property */ - /* PCI #address-cells == 3 and #size-cells == 2 always */ - res = &dev->resource[PCI_BRIDGE_RESOURCES]; - for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { - res->flags = 0; - bus->resource[i] = res; - ++res; - } - i = 1; - for (; len >= 32; len -= 32, ranges += 8) { - flags = pci_parse_of_flags(ranges[0], 1); - size = of_read_number(&ranges[6], 2); - if (flags == 0 || size == 0) - continue; - if (flags & IORESOURCE_IO) { - res = bus->resource[0]; - if (res->flags) { - printk(KERN_ERR "PCI: ignoring extra I/O range" - " for bridge %s\n", node->full_name); - continue; - } - } else { - if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { - printk(KERN_ERR "PCI: too many memory ranges" - " for bridge %s\n", node->full_name); - continue; - } - res = bus->resource[i]; - ++i; - } - res->start = of_read_number(&ranges[1], 2); - res->end = res->start + size - 1; - res->flags = flags; - } - sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), - bus->number); - pr_debug(" bus name: %s\n", bus->name); - - mode = PCI_PROBE_NORMAL; - if (ppc_md.pci_probe_mode) - mode = ppc_md.pci_probe_mode(bus); - pr_debug(" probe mode: %d\n", mode); - - if (mode == PCI_PROBE_DEVTREE) - of_scan_bus(node, bus); - else if (mode == PCI_PROBE_NORMAL) - pci_scan_child_bus(bus); -} -EXPORT_SYMBOL(of_scan_pci_bridge); - -void __devinit scan_phb(struct pci_controller *hose) -{ - struct pci_bus *bus; - struct device_node *node = hose->dn; - int mode; - - pr_debug("PCI: Scanning PHB %s\n", - node ? node->full_name : "<NO NAME>"); - - /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node); - if (bus == NULL) { - printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", - hose->global_number); - return; - } - bus->secondary = hose->first_busno; - hose->bus = bus; - - /* Get some IO space for the new PHB */ - pcibios_map_io_space(bus); - - /* Wire up PHB bus resources */ - pcibios_setup_phb_resources(hose); - - /* Get probe mode and perform scan */ - mode = PCI_PROBE_NORMAL; - if (node && ppc_md.pci_probe_mode) - mode = ppc_md.pci_probe_mode(bus); - pr_debug(" probe mode: %d\n", mode); - if (mode == PCI_PROBE_DEVTREE) { - bus->subordinate = hose->last_busno; - of_scan_bus(node, bus); - } - - if (mode == PCI_PROBE_NORMAL) - hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); -} - static int __init pcibios_init(void) { struct pci_controller *hose, *tmp; @@ -392,7 +64,7 @@ static int __init pcibios_init(void) /* Scan all of the recorded PCI controllers. */ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - scan_phb(hose); + pcibios_scan_phb(hose, hose->dn); pci_bus_add_devices(hose->bus); } @@ -526,6 +198,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_map_io_space); +void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose) +{ + pcibios_map_io_space(hose->bus); +} + #define IOBASE_BRIDGE_NUMBER 0 #define IOBASE_MEMORY 1 #define IOBASE_IO 2 diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c new file mode 100644 index 00000000000..7311fdfb9bf --- /dev/null +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -0,0 +1,359 @@ +/* + * Helper routines to scan the device tree for PCI devices and busses + * + * Migrated out of PowerPC architecture pci_64.c file by Grant Likely + * <grant.likely@secretlab.ca> so that these routines are available for + * 32 bit also. + * + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * Rework, based on alpha PCI code. + * Copyright (c) 2009 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> + +/** + * get_int_prop - Decode a u32 from a device tree property + */ +static u32 get_int_prop(struct device_node *np, const char *name, u32 def) +{ + const u32 *prop; + int len; + + prop = of_get_property(np, name, &len); + if (prop && len >= 4) + return *prop; + return def; +} + +/** + * pci_parse_of_flags - Parse the flags cell of a device tree PCI address + * @addr0: value of 1st cell of a device tree PCI address. + * @bridge: Set this flag if the address is from a bridge 'ranges' property + */ +unsigned int pci_parse_of_flags(u32 addr0, int bridge) +{ + unsigned int flags = 0; + + if (addr0 & 0x02000000) { + flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; + flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; + flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; + if (addr0 & 0x40000000) + flags |= IORESOURCE_PREFETCH + | PCI_BASE_ADDRESS_MEM_PREFETCH; + /* Note: We don't know whether the ROM has been left enabled + * by the firmware or not. We mark it as disabled (ie, we do + * not set the IORESOURCE_ROM_ENABLE flag) for now rather than + * do a config space read, it will be force-enabled if needed + */ + if (!bridge && (addr0 & 0xff) == 0x30) + flags |= IORESOURCE_READONLY; + } else if (addr0 & 0x01000000) + flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + if (flags) + flags |= IORESOURCE_SIZEALIGN; + return flags; +} + +/** + * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node + * @node: device tree node for the PCI device + * @dev: pci_dev structure for the device + * + * This function parses the 'assigned-addresses' property of a PCI devices' + * device tree node and writes them into the associated pci_dev structure. + */ +static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev) +{ + u64 base, size; + unsigned int flags; + struct resource *res; + const u32 *addrs; + u32 i; + int proplen; + + addrs = of_get_property(node, "assigned-addresses", &proplen); + if (!addrs) + return; + pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); + for (; proplen >= 20; proplen -= 20, addrs += 5) { + flags = pci_parse_of_flags(addrs[0], 0); + if (!flags) + continue; + base = of_read_number(&addrs[1], 2); + size = of_read_number(&addrs[3], 2); + if (!size) + continue; + i = addrs[0] & 0xff; + pr_debug(" base: %llx, size: %llx, i: %x\n", + (unsigned long long)base, + (unsigned long long)size, i); + + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { + res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; + } else if (i == dev->rom_base_reg) { + res = &dev->resource[PCI_ROM_RESOURCE]; + flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; + } else { + printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + continue; + } + res->start = base; + res->end = base + size - 1; + res->flags = flags; + res->name = pci_name(dev); + } +} + +/** + * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev + * @node: device tree node pointer + * @bus: bus the device is sitting on + * @devfn: PCI function number, extracted from device tree by caller. + */ +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + const char *type; + + dev = alloc_pci_dev(); + if (!dev) + return NULL; + type = of_get_property(node, "device_type", NULL); + if (type == NULL) + type = ""; + + pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); + + dev->bus = bus; + dev->sysdata = node; + dev->dev.parent = bus->bridge; + dev->dev.bus = &pci_bus_type; + dev->devfn = devfn; + dev->multifunction = 0; /* maybe a lie? */ + dev->needs_freset = 0; /* pcie fundamental reset required */ + + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); + dev->device = get_int_prop(node, "device-id", 0xffff); + dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); + dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); + + dev->cfg_size = pci_cfg_space_size(dev); + + dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + dev->class = get_int_prop(node, "class-code", 0); + dev->revision = get_int_prop(node, "revision-id", 0); + + pr_debug(" class: 0x%x\n", dev->class); + pr_debug(" revision: 0x%x\n", dev->revision); + + dev->current_state = 4; /* unknown power state */ + dev->error_state = pci_channel_io_normal; + dev->dma_mask = 0xffffffff; + + if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { + /* a PCI-PCI bridge */ + dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; + dev->rom_base_reg = PCI_ROM_ADDRESS1; + } else if (!strcmp(type, "cardbus")) { + dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; + } else { + dev->hdr_type = PCI_HEADER_TYPE_NORMAL; + dev->rom_base_reg = PCI_ROM_ADDRESS; + /* Maybe do a default OF mapping here */ + dev->irq = NO_IRQ; + } + + of_pci_parse_addrs(node, dev); + + pr_debug(" adding to system ...\n"); + + pci_device_add(dev, bus); + + return dev; +} +EXPORT_SYMBOL(of_create_pci_dev); + +/** + * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes + * @node: device tree node of bridge + * @dev: pci_dev structure for the bridge + * + * of_scan_bus() calls this routine for each PCI bridge that it finds, and + * this routine in turn call of_scan_bus() recusively to scan for more child + * devices. + */ +void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) +{ + struct pci_bus *bus; + const u32 *busrange, *ranges; + int len, i, mode; + struct resource *res; + unsigned int flags; + u64 size; + + pr_debug("of_scan_pci_bridge(%s)\n", node->full_name); + + /* parse bus-range property */ + busrange = of_get_property(node, "bus-range", &len); + if (busrange == NULL || len != 8) { + printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", + node->full_name); + return; + } + ranges = of_get_property(node, "ranges", &len); + if (ranges == NULL) { + printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", + node->full_name); + return; + } + + bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %s\n", + node->full_name); + return; + } + + bus->primary = dev->bus->number; + bus->subordinate = busrange[1]; + bus->bridge_ctl = 0; + bus->sysdata = node; + + /* parse ranges property */ + /* PCI #address-cells == 3 and #size-cells == 2 always */ + res = &dev->resource[PCI_BRIDGE_RESOURCES]; + for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { + res->flags = 0; + bus->resource[i] = res; + ++res; + } + i = 1; + for (; len >= 32; len -= 32, ranges += 8) { + flags = pci_parse_of_flags(ranges[0], 1); + size = of_read_number(&ranges[6], 2); + if (flags == 0 || size == 0) + continue; + if (flags & IORESOURCE_IO) { + res = bus->resource[0]; + if (res->flags) { + printk(KERN_ERR "PCI: ignoring extra I/O range" + " for bridge %s\n", node->full_name); + continue; + } + } else { + if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { + printk(KERN_ERR "PCI: too many memory ranges" + " for bridge %s\n", node->full_name); + continue; + } + res = bus->resource[i]; + ++i; + } + res->start = of_read_number(&ranges[1], 2); + res->end = res->start + size - 1; + res->flags = flags; + } + sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), + bus->number); + pr_debug(" bus name: %s\n", bus->name); + + mode = PCI_PROBE_NORMAL; + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + else if (mode == PCI_PROBE_NORMAL) + pci_scan_child_bus(bus); +} +EXPORT_SYMBOL(of_scan_pci_bridge); + +/** + * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * @rescan_existing: Flag indicating bus has already been set up + */ +static void __devinit __of_scan_bus(struct device_node *node, + struct pci_bus *bus, int rescan_existing) +{ + struct device_node *child; + const u32 *reg; + int reglen, devfn; + struct pci_dev *dev; + + pr_debug("of_scan_bus(%s) bus no %d... \n", + node->full_name, bus->number); + + /* Scan direct children */ + for_each_child_of_node(node, child) { + pr_debug(" * %s\n", child->full_name); + reg = of_get_property(child, "reg", ®len); + if (reg == NULL || reglen < 20) + continue; + devfn = (reg[0] >> 8) & 0xff; + + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(child, bus, devfn); + if (!dev) + continue; + pr_debug(" dev header type: %x\n", dev->hdr_type); + } + + /* Apply all fixups necessary. We don't fixup the bus "self" + * for an existing bridge that is being rescanned + */ + if (!rescan_existing) + pcibios_setup_bus_self(bus); + pcibios_setup_bus_devices(bus); + + /* Now scan child busses */ + list_for_each_entry(dev, &bus->devices, bus_list) { + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || + dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { + struct device_node *child = pci_device_to_OF_node(dev); + if (dev) + of_scan_pci_bridge(child, dev); + } + } +} + +/** + * of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + */ +void __devinit of_scan_bus(struct device_node *node, + struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 0); +} +EXPORT_SYMBOL_GPL(of_scan_bus); + +/** + * of_rescan_bus - given a PCI bus node, scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * + * Same as of_scan_bus, but for a pci_bus structure that has already been + * setup. + */ +void __devinit of_rescan_bus(struct device_node *node, + struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 1); +} +EXPORT_SYMBOL_GPL(of_rescan_bus); + diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index 70e1f57f7dd..7ceefaf3a7f 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -32,6 +32,9 @@ struct cpu_hw_counters { unsigned long mmcr[3]; struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS]; u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS]; + u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; + unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; }; DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters); @@ -62,7 +65,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) { return 0; } -static inline void perf_set_pmu_inuse(int inuse) { } static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { } static inline u32 perf_get_misc_flags(struct pt_regs *regs) { @@ -93,11 +95,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) return 0; } -static inline void perf_set_pmu_inuse(int inuse) -{ - get_lppaca()->pmcregs_in_use = inuse; -} - /* * The user wants a data address recorded. * If we're not doing instruction sampling, give them the SDAR @@ -245,13 +242,11 @@ static void write_pmc(int idx, unsigned long val) * and see if any combination of alternative codes is feasible. * The feasible set is returned in event[]. */ -static int power_check_constraints(u64 event[], unsigned int cflags[], +static int power_check_constraints(struct cpu_hw_counters *cpuhw, + u64 event[], unsigned int cflags[], int n_ev) { unsigned long mask, value, nv; - u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS]; int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS]; int i, j; @@ -266,21 +261,23 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], if ((cflags[i] & PPMU_LIMITED_PMC_REQD) && !ppmu->limited_pmc_event(event[i])) { ppmu->get_alternatives(event[i], cflags[i], - alternatives[i]); - event[i] = alternatives[i][0]; + cpuhw->alternatives[i]); + event[i] = cpuhw->alternatives[i][0]; } - if (ppmu->get_constraint(event[i], &amasks[i][0], - &avalues[i][0])) + if (ppmu->get_constraint(event[i], &cpuhw->amasks[i][0], + &cpuhw->avalues[i][0])) return -1; } value = mask = 0; for (i = 0; i < n_ev; ++i) { - nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf); + nv = (value | cpuhw->avalues[i][0]) + + (value & cpuhw->avalues[i][0] & addf); if ((((nv + tadd) ^ value) & mask) != 0 || - (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0) + (((nv + tadd) ^ cpuhw->avalues[i][0]) & + cpuhw->amasks[i][0]) != 0) break; value = nv; - mask |= amasks[i][0]; + mask |= cpuhw->amasks[i][0]; } if (i == n_ev) return 0; /* all OK */ @@ -291,10 +288,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], for (i = 0; i < n_ev; ++i) { choice[i] = 0; n_alt[i] = ppmu->get_alternatives(event[i], cflags[i], - alternatives[i]); + cpuhw->alternatives[i]); for (j = 1; j < n_alt[i]; ++j) - ppmu->get_constraint(alternatives[i][j], - &amasks[i][j], &avalues[i][j]); + ppmu->get_constraint(cpuhw->alternatives[i][j], + &cpuhw->amasks[i][j], + &cpuhw->avalues[i][j]); } /* enumerate all possibilities and see if any will work */ @@ -313,11 +311,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], * where k > j, will satisfy the constraints. */ while (++j < n_alt[i]) { - nv = (value | avalues[i][j]) + - (value & avalues[i][j] & addf); + nv = (value | cpuhw->avalues[i][j]) + + (value & cpuhw->avalues[i][j] & addf); if ((((nv + tadd) ^ value) & mask) == 0 && - (((nv + tadd) ^ avalues[i][j]) - & amasks[i][j]) == 0) + (((nv + tadd) ^ cpuhw->avalues[i][j]) + & cpuhw->amasks[i][j]) == 0) break; } if (j >= n_alt[i]) { @@ -339,7 +337,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], svalues[i] = value; smasks[i] = mask; value = nv; - mask |= amasks[i][j]; + mask |= cpuhw->amasks[i][j]; ++i; j = -1; } @@ -347,7 +345,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[], /* OK, we have a feasible combination, tell the caller the solution */ for (i = 0; i < n_ev; ++i) - event[i] = alternatives[i][choice[i]]; + event[i] = cpuhw->alternatives[i][choice[i]]; return 0; } @@ -531,8 +529,7 @@ void hw_perf_disable(void) * Check if we ever enabled the PMU on this cpu. */ if (!cpuhw->pmcs_enabled) { - if (ppc_md.enable_pmcs) - ppc_md.enable_pmcs(); + ppc_enable_pmcs(); cpuhw->pmcs_enabled = 1; } @@ -594,7 +591,7 @@ void hw_perf_enable(void) mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); if (cpuhw->n_counters == 0) - perf_set_pmu_inuse(0); + ppc_set_pmu_inuse(0); goto out_enable; } @@ -627,7 +624,7 @@ void hw_perf_enable(void) * bit set and set the hardware counters to their initial values. * Then unfreeze the counters. */ - perf_set_pmu_inuse(1); + ppc_set_pmu_inuse(1); mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) @@ -752,7 +749,7 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader, return -EAGAIN; if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n)) return -EAGAIN; - i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0); + i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0); if (i < 0) return -EAGAIN; cpuhw->n_counters = n0 + n; @@ -807,7 +804,7 @@ static int power_pmu_enable(struct perf_counter *counter) cpuhw->flags[n0] = counter->hw.counter_base; if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1)) goto out; - if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1)) + if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1)) goto out; counter->hw.config = cpuhw->events[n0]; @@ -1012,6 +1009,7 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) unsigned int cflags[MAX_HWCOUNTERS]; int n; int err; + struct cpu_hw_counters *cpuhw; if (!ppmu) return ERR_PTR(-ENXIO); @@ -1090,7 +1088,11 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) cflags[n] = flags; if (check_excludes(ctrs, cflags, n, 1)) return ERR_PTR(-EINVAL); - if (power_check_constraints(events, cflags, n + 1)) + + cpuhw = &get_cpu_var(cpu_hw_counters); + err = power_check_constraints(cpuhw, events, cflags, n + 1); + put_cpu_var(cpu_hw_counters); + if (err) return ERR_PTR(-EINVAL); counter->hw.config = events[n]; diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 892a9f2e6d7..0a321643305 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -284,14 +284,13 @@ int set_dabr(unsigned long dabr) return ppc_md.set_dabr(dabr); /* XXX should we have a CPU_FTR_HAS_DABR ? */ -#if defined(CONFIG_PPC64) || defined(CONFIG_6xx) - mtspr(SPRN_DABR, dabr); -#endif - #if defined(CONFIG_BOOKE) mtspr(SPRN_DAC1, dabr); +#elif defined(CONFIG_PPC_BOOK3S) + mtspr(SPRN_DABR, dabr); #endif + return 0; } @@ -372,15 +371,16 @@ struct task_struct *__switch_to(struct task_struct *prev, #endif /* CONFIG_SMP */ - if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) - set_dabr(new->thread.dabr); - #if defined(CONFIG_BOOKE) /* If new thread DAC (HW breakpoint) is the same then leave it */ if (new->thread.dabr) set_dabr(new->thread.dabr); +#else + if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) + set_dabr(new->thread.dabr); #endif + new_thread = &new->thread; old_thread = ¤t->thread; @@ -664,6 +664,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, sp_vsid |= SLB_VSID_KERNEL | llp; p->thread.ksp_vsid = sp_vsid; } +#endif /* CONFIG_PPC_STD_MMU_64 */ /* * The PPC64 ABI makes use of a TOC to contain function @@ -671,6 +672,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, * to the TOC entry. The first entry is a pointer to the actual * function. */ +#ifdef CONFIG_PPC64 kregs->nip = *((unsigned long *)ret_from_fork); #else kregs->nip = (unsigned long)ret_from_fork; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index a538824616f..864334b337a 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -190,6 +190,8 @@ static int __initdata of_platform; static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; +static unsigned long __initdata prom_memory_limit; + static unsigned long __initdata alloc_top; static unsigned long __initdata alloc_top_high; static unsigned long __initdata alloc_bottom; @@ -484,6 +486,67 @@ static int __init prom_setprop(phandle node, const char *nodename, return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); } +/* We can't use the standard versions because of RELOC headaches. */ +#define isxdigit(c) (('0' <= (c) && (c) <= '9') \ + || ('a' <= (c) && (c) <= 'f') \ + || ('A' <= (c) && (c) <= 'F')) + +#define isdigit(c) ('0' <= (c) && (c) <= '9') +#define islower(c) ('a' <= (c) && (c) <= 'z') +#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c)) + +unsigned long prom_strtoul(const char *cp, const char **endp) +{ + unsigned long result = 0, base = 10, value; + + if (*cp == '0') { + base = 8; + cp++; + if (toupper(*cp) == 'X') { + cp++; + base = 16; + } + } + + while (isxdigit(*cp) && + (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) { + result = result * base + value; + cp++; + } + + if (endp) + *endp = cp; + + return result; +} + +unsigned long prom_memparse(const char *ptr, const char **retptr) +{ + unsigned long ret = prom_strtoul(ptr, retptr); + int shift = 0; + + /* + * We can't use a switch here because GCC *may* generate a + * jump table which won't work, because we're not running at + * the address we're linked at. + */ + if ('G' == **retptr || 'g' == **retptr) + shift = 30; + + if ('M' == **retptr || 'm' == **retptr) + shift = 20; + + if ('K' == **retptr || 'k' == **retptr) + shift = 10; + + if (shift) { + ret <<= shift; + (*retptr)++; + } + + return ret; +} + /* * Early parsing of the command line passed to the kernel, used for * "mem=x" and the options that affect the iommu @@ -491,9 +554,8 @@ static int __init prom_setprop(phandle node, const char *nodename, static void __init early_cmdline_parse(void) { struct prom_t *_prom = &RELOC(prom); -#ifdef CONFIG_PPC64 const char *opt; -#endif + char *p; int l = 0; @@ -521,6 +583,15 @@ static void __init early_cmdline_parse(void) RELOC(prom_iommu_force_on) = 1; } #endif + opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); + if (opt) { + opt += 4; + RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); +#ifdef CONFIG_PPC64 + /* Align to 16 MB == size of ppc64 large page */ + RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); +#endif + } } #ifdef CONFIG_PPC_PSERIES @@ -1027,6 +1098,29 @@ static void __init prom_init_mem(void) } /* + * If prom_memory_limit is set we reduce the upper limits *except* for + * alloc_top_high. This must be the real top of RAM so we can put + * TCE's up there. + */ + + RELOC(alloc_top_high) = RELOC(ram_top); + + if (RELOC(prom_memory_limit)) { + if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { + prom_printf("Ignoring mem=%x <= alloc_bottom.\n", + RELOC(prom_memory_limit)); + RELOC(prom_memory_limit) = 0; + } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { + prom_printf("Ignoring mem=%x >= ram_top.\n", + RELOC(prom_memory_limit)); + RELOC(prom_memory_limit) = 0; + } else { + RELOC(ram_top) = RELOC(prom_memory_limit); + RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); + } + } + + /* * Setup our top alloc point, that is top of RMO or top of * segment 0 when running non-LPAR. * Some RS64 machines have buggy firmware where claims up at @@ -1041,6 +1135,7 @@ static void __init prom_init_mem(void) RELOC(alloc_top_high) = RELOC(ram_top); prom_printf("memory layout at init:\n"); + prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); @@ -1259,10 +1354,6 @@ static void __init prom_initialize_tce_table(void) * * -- Cort */ -extern char __secondary_hold; -extern unsigned long __secondary_hold_spinloop; -extern unsigned long __secondary_hold_acknowledge; - /* * We want to reference the copy of __secondary_hold_* in the * 0 - 0x100 address range @@ -2399,6 +2490,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * Fill in some infos for use by the kernel later on */ + if (RELOC(prom_memory_limit)) + prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit", + &RELOC(prom_memory_limit), + sizeof(prom_memory_limit)); #ifdef CONFIG_PPC64 if (RELOC(prom_iommu_off)) prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index c434823b8c8..bf90361bb70 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -39,6 +39,7 @@ #include <asm/smp.h> #include <asm/atomic.h> #include <asm/time.h> +#include <asm/mmu.h> struct rtas_t rtas = { .lock = __RAW_SPIN_LOCK_UNLOCKED @@ -713,6 +714,7 @@ static void rtas_percpu_suspend_me(void *info) { long rc = H_SUCCESS; unsigned long msr_save; + u16 slb_size = mmu_slb_size; int cpu; struct rtas_suspend_me_data *data = (struct rtas_suspend_me_data *)info; @@ -735,13 +737,16 @@ static void rtas_percpu_suspend_me(void *info) /* All other cpus are in H_JOIN, this cpu does * the suspend. */ + slb_set_size(SLB_MIN_SIZE); printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); data->error = rtas_call(data->token, 0, 1, NULL); - if (data->error) + if (data->error) { printk(KERN_DEBUG "ibm,suspend-me returned %d\n", data->error); + slb_set_size(slb_size); + } } else { printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n", smp_processor_id(), rc); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index e1e3059cf34..53bcf3d792d 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -210,6 +210,14 @@ void nvram_write_byte(unsigned char val, int addr) } EXPORT_SYMBOL(nvram_write_byte); +ssize_t nvram_get_size(void) +{ + if (ppc_md.nvram_size) + return ppc_md.nvram_size(); + return -1; +} +EXPORT_SYMBOL(nvram_get_size); + void nvram_sync(void) { if (ppc_md.nvram_sync) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 1f6816003eb..797ea95aae2 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -57,11 +57,13 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> +#include <asm/mmu-hash64.h> #include <asm/firmware.h> #include <asm/xmon.h> #include <asm/udbg.h> #include <asm/kexec.h> #include <asm/swiotlb.h> +#include <asm/mmu_context.h> #include "setup.h" @@ -142,11 +144,14 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ -/* Put the paca pointer into r13 and SPRG3 */ +/* Put the paca pointer into r13 and SPRG_PACA */ void __init setup_paca(int cpu) { local_paca = &paca[cpu]; - mtspr(SPRN_SPRG3, local_paca); + mtspr(SPRN_SPRG_PACA, local_paca); +#ifdef CONFIG_PPC_BOOK3E + mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb); +#endif } /* @@ -230,9 +235,6 @@ void early_setup_secondary(void) #endif /* CONFIG_SMP */ #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) -extern unsigned long __secondary_hold_spinloop; -extern void generic_secondary_smp_init(void); - void smp_release_cpus(void) { unsigned long *ptr; @@ -453,6 +455,24 @@ static void __init irqstack_early_init(void) #define irqstack_early_init() #endif +#ifdef CONFIG_PPC_BOOK3E +static void __init exc_lvl_early_init(void) +{ + unsigned int i; + + for_each_possible_cpu(i) { + critirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + dbgirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + mcheckirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + } +} +#else +#define exc_lvl_early_init() +#endif + /* * Stack space used when we detect a bad kernel stack pointer, and * early in SMP boots before relocation is enabled. @@ -512,6 +532,7 @@ void __init setup_arch(char **cmdline_p) init_mm.brk = klimit; irqstack_early_init(); + exc_lvl_early_init(); emergency_stack_init(); #ifdef CONFIG_PPC_STD_MMU_64 @@ -534,6 +555,10 @@ void __init setup_arch(char **cmdline_p) #endif paging_init(); + + /* Initialize the MMU context management stuff */ + mmu_context_init(); + ppc64_boot_msg(0x15, "Setup Done"); } @@ -569,25 +594,53 @@ void cpu_die(void) } #ifdef CONFIG_SMP -void __init setup_per_cpu_areas(void) +#define PCPU_DYN_SIZE () + +static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) { - int i; - unsigned long size; - char *ptr; - - /* Copy section for each CPU (we discard the original) */ - size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); -#ifdef CONFIG_MODULES - if (size < PERCPU_ENOUGH_ROOM) - size = PERCPU_ENOUGH_ROOM; -#endif + return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align, + __pa(MAX_DMA_ADDRESS)); +} - for_each_possible_cpu(i) { - ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size); +static void __init pcpu_fc_free(void *ptr, size_t size) +{ + free_bootmem(__pa(ptr), size); +} - paca[i].data_offset = ptr - __per_cpu_start; - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - } +static int pcpu_cpu_distance(unsigned int from, unsigned int to) +{ + if (cpu_to_node(from) == cpu_to_node(to)) + return LOCAL_DISTANCE; + else + return REMOTE_DISTANCE; +} + +void __init setup_per_cpu_areas(void) +{ + const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; + size_t atom_size; + unsigned long delta; + unsigned int cpu; + int rc; + + /* + * Linear mapping is one of 4K, 1M and 16M. For 4K, no need + * to group units. For larger mappings, use 1M atom which + * should be large enough to contain a number of units. + */ + if (mmu_linear_psize == MMU_PAGE_4K) + atom_size = PAGE_SIZE; + else + atom_size = 1 << 20; + + rc = pcpu_embed_first_chunk(0, dyn_size, atom_size, pcpu_cpu_distance, + pcpu_fc_alloc, pcpu_fc_free); + if (rc < 0) + panic("cannot initialize percpu area (err=%d)", rc); + + delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; + for_each_possible_cpu(cpu) + paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu]; } #endif diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0b47de07302..d387b3937cc 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -269,7 +269,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) cpu_callin_map[boot_cpuid] = 1; if (smp_ops) - max_cpus = smp_ops->probe(); + if (smp_ops->probe) + max_cpus = smp_ops->probe(); + else + max_cpus = NR_CPUS; else max_cpus = 1; @@ -412,9 +415,8 @@ int __cpuinit __cpu_up(unsigned int cpu) * CPUs can take much longer to come up in the * hotplug case. Wait five seconds. */ - for (c = 25; c && !cpu_callin_map[cpu]; c--) { - msleep(200); - } + for (c = 5000; c && !cpu_callin_map[cpu]; c--) + msleep(1); #endif if (!cpu_callin_map[cpu]) { @@ -494,7 +496,8 @@ int __devinit start_secondary(void *unused) preempt_disable(); cpu_callin_map[cpu] = 1; - smp_ops->setup_cpu(cpu); + if (smp_ops->setup_cpu) + smp_ops->setup_cpu(cpu); if (smp_ops->take_timebase) smp_ops->take_timebase(); @@ -557,7 +560,7 @@ void __init smp_cpus_done(unsigned int max_cpus) old_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); - if (smp_ops) + if (smp_ops && smp_ops->setup_cpu) smp_ops->setup_cpu(boot_cpuid); set_cpus_allowed(current, old_mask); diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index bb1cfcfdbbb..1cc5e9e5da9 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -343,6 +343,18 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin) return sys_lseek(fd, (int)offset, origin); } +long compat_sys_truncate(const char __user * path, u32 length) +{ + /* sign extend length */ + return sys_truncate(path, (int)length); +} + +long compat_sys_ftruncate(int fd, u32 length) +{ + /* sign extend length */ + return sys_ftruncate(fd, (int)length); +} + /* Note: it is necessary to treat bufsiz as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index f41aec85aa4..956ab33fd73 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -17,6 +17,7 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/smp.h> +#include <asm/pmc.h> #include "cacheinfo.h" @@ -123,6 +124,8 @@ static DEFINE_PER_CPU(char, pmcs_enabled); void ppc_enable_pmcs(void) { + ppc_set_pmu_inuse(1); + /* Only need to enable them once */ if (__get_cpu_var(pmcs_enabled)) return; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index eae4511ceea..a180b4f9a4f 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -479,7 +479,8 @@ static int __init iSeries_tb_recal(void) unsigned long tb_ticks = tb - iSeries_recal_tb; unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12; unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec; - unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ; + unsigned long new_tb_ticks_per_jiffy = + DIV_ROUND_CLOSEST(new_tb_ticks_per_sec, HZ); long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy; char sign = '+'; /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */ @@ -726,6 +727,18 @@ static int __init get_freq(char *name, int cells, unsigned long *val) return found; } +/* should become __cpuinit when secondary_cpu_time_init also is */ +void start_cpu_decrementer(void) +{ +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) + /* Clear any pending timer interrupts */ + mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); + + /* Enable decrementer interrupt */ + mtspr(SPRN_TCR, TCR_DIE); +#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */ +} + void __init generic_calibrate_decr(void) { ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ @@ -745,14 +758,6 @@ void __init generic_calibrate_decr(void) printk(KERN_ERR "WARNING: Estimating processor frequency " "(not found)\n"); } - -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -#endif } int update_persistent_clock(struct timespec now) @@ -913,6 +918,11 @@ static void __init init_decrementer_clockevent(void) void secondary_cpu_time_init(void) { + /* Start the decrementer on CPUs that have manual control + * such as BookE + */ + start_cpu_decrementer(); + /* FIME: Should make unrelatred change to move snapshot_timebase * call here ! */ register_decrementer_clockevent(smp_processor_id()); @@ -1016,6 +1026,11 @@ void __init time_init(void) write_sequnlock_irqrestore(&xtime_lock, flags); + /* Start the decrementer on CPUs that have manual control + * such as BookE + */ + start_cpu_decrementer(); + /* Register the clocksource, if we're not running on iSeries */ if (!firmware_has_feature(FW_FEATURE_ISERIES)) clocksource_init(); diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index ad06d5c75b1..a0abce251d0 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -203,7 +203,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) } else { vdso_pagelist = vdso64_pagelist; vdso_pages = vdso64_pages; - vdso_base = VDSO64_MBASE; + /* + * On 64bit we don't have a preferred map address. This + * allows get_unmapped_area to find an area near other mmaps + * and most likely share a SLB entry. + */ + vdso_base = 0; } #else vdso_pagelist = vdso32_pagelist; diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index c3d57bd01a8..b54b8168813 100644 --- a/arch/powerpc/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -12,6 +12,7 @@ endif targets := $(obj-vdso32) vdso32.so vdso32.so.dbg obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) +GCOV_PROFILE := n EXTRA_CFLAGS := -shared -fno-common -fno-builtin EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index fa7f1b8f3e5..dd0c8e93677 100644 --- a/arch/powerpc/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile @@ -7,6 +7,8 @@ obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o targets := $(obj-vdso64) vdso64.so vdso64.so.dbg obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64)) +GCOV_PROFILE := n + EXTRA_CFLAGS := -shared -fno-common -fno-builtin EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ $(call ld-option, -Wl$(comma)--hash-style=sysv) diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index ea4d64644d0..67b6916f0e9 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -65,7 +65,7 @@ _GLOBAL(load_up_altivec) 1: /* enable use of VMX after return */ #ifdef CONFIG_PPC32 - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ oris r9,r9,MSR_VEC@h #else ld r4,PACACURRENT(r13) diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 819e59f6f7c..bc7b41edbdf 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -601,7 +601,7 @@ static void vio_dma_iommu_unmap_sg(struct device *dev, vio_cmo_dealloc(viodev, alloc_size); } -struct dma_mapping_ops vio_dma_mapping_ops = { +struct dma_map_ops vio_dma_mapping_ops = { .alloc_coherent = vio_dma_iommu_alloc_coherent, .free_coherent = vio_dma_iommu_free_coherent, .map_sg = vio_dma_iommu_map_sg, diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 8ef8a14abc9..58da4070723 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -37,12 +37,6 @@ jiffies = jiffies_64 + 4; #endif SECTIONS { - /* Sections to be discarded. */ - /DISCARD/ : { - *(.exitcall.exit) - EXIT_DATA - } - . = KERNELBASE; /* @@ -245,10 +239,6 @@ SECTIONS } #endif - . = ALIGN(PAGE_SIZE); - _edata = .; - PROVIDE32 (edata = .); - /* The initial task and kernel stack */ #ifdef CONFIG_PPC32 . = ALIGN(8192); @@ -282,6 +272,10 @@ SECTIONS __nosave_end = .; } + . = ALIGN(PAGE_SIZE); + _edata = .; + PROVIDE32 (edata = .); + /* * And finally the bss */ @@ -298,4 +292,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); _end = . ; PROVIDE32 (end = .); + + /* Sections to be discarded. */ + DISCARDS } |