aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/52xx/lite5200.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/52xx/lite5200.c')
-rw-r--r--arch/powerpc/platforms/52xx/lite5200.c121
1 files changed, 60 insertions, 61 deletions
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 5c46e898fd4..0caa3d955c3 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -15,33 +15,13 @@
#undef DEBUG
-#include <linux/stddef.h>
-#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
+#include <linux/of.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
-#include <asm/ipic.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-#include <asm/of_platform.h>
-
#include <asm/mpc52xx.h>
/* ************************************************************************
@@ -50,19 +30,56 @@
*
*/
+/*
+ * Fix clock configuration.
+ *
+ * Firmware is supposed to be responsible for this. If you are creating a
+ * new board port, do *NOT* duplicate this code. Fix your boot firmware
+ * to set it correctly in the first place
+ */
+static void __init
+lite5200_fix_clock_config(void)
+{
+ struct mpc52xx_cdm __iomem *cdm;
+
+ /* Map zones */
+ cdm = mpc52xx_find_and_map("mpc5200-cdm");
+ if (!cdm) {
+ printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
+ __FUNCTION__);
+ return;
+ }
+
+ /* Use internal 48 Mhz */
+ out_8(&cdm->ext_48mhz_en, 0x00);
+ out_8(&cdm->fd_enable, 0x01);
+ if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
+ out_be16(&cdm->fd_counters, 0x0001);
+ else
+ out_be16(&cdm->fd_counters, 0x5555);
+
+ /* Unmap the regs */
+ iounmap(cdm);
+}
+
+/*
+ * Fix setting of port_config register.
+ *
+ * Firmware is supposed to be responsible for this. If you are creating a
+ * new board port, do *NOT* duplicate this code. Fix your boot firmware
+ * to set it correctly in the first place
+ */
static void __init
-lite5200_setup_cpu(void)
+lite5200_fix_port_config(void)
{
struct mpc52xx_gpio __iomem *gpio;
u32 port_config;
- /* Map zones */
gpio = mpc52xx_find_and_map("mpc5200-gpio");
if (!gpio) {
- printk(KERN_ERR __FILE__ ": "
- "Error while mapping GPIO register for port config. "
- "Expect some abnormal behavior\n");
- goto error;
+ printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
+ __FUNCTION__);
+ return;
}
/* Set port config */
@@ -81,12 +98,10 @@ lite5200_setup_cpu(void)
out_be32(&gpio->port_config, port_config);
/* Unmap zone */
-error:
iounmap(gpio);
}
#ifdef CONFIG_PM
-static u32 descr_a;
static void lite5200_suspend_prepare(void __iomem *mbar)
{
u8 pin = 1; /* GPIO_WKUP_1 (GPIO_PSC2_4) */
@@ -97,42 +112,41 @@ static void lite5200_suspend_prepare(void __iomem *mbar)
* power down usb port
* this needs to be called before of-ohci suspend code
*/
- descr_a = in_be32(mbar + 0x1048);
- out_be32(mbar + 0x1048, (descr_a & ~0x200) | 0x100);
+
+ /* set ports to "power switched" and "powered at the same time"
+ * USB Rh descriptor A: NPS = 0, PSM = 0 */
+ out_be32(mbar + 0x1048, in_be32(mbar + 0x1048) & ~0x300);
+ /* USB Rh status: LPS = 1 - turn off power */
+ out_be32(mbar + 0x1050, 0x00000001);
}
static void lite5200_resume_finish(void __iomem *mbar)
{
- out_be32(mbar + 0x1048, descr_a);
+ /* USB Rh status: LPSC = 1 - turn on power */
+ out_be32(mbar + 0x1050, 0x00010000);
}
#endif
static void __init lite5200_setup_arch(void)
{
+#ifdef CONFIG_PCI
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("lite5200_setup_arch()", 0);
- np = of_find_node_by_type(NULL, "cpu");
- if (np) {
- const unsigned int *fp =
- of_get_property(np, "clock-frequency", NULL);
- if (fp != 0)
- loops_per_jiffy = *fp / HZ;
- else
- loops_per_jiffy = 50000000 / HZ;
- of_node_put(np);
- }
+ /* Fix things that firmware should have done. */
+ lite5200_fix_clock_config();
+ lite5200_fix_port_config();
- /* CPU & Port mux setup */
- mpc52xx_setup_cpu(); /* Generic */
- lite5200_setup_cpu(); /* Platorm specific */
+ /* Some mpc5200 & mpc5200b related configuration */
+ mpc5200_setup_xlb_arbiter();
#ifdef CONFIG_PM
mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
mpc52xx_suspend.board_resume_finish = lite5200_resume_finish;
- mpc52xx_pm_init();
+ lite5200_pm_init();
#endif
#ifdef CONFIG_PCI
@@ -156,20 +170,6 @@ static void __init lite5200_setup_arch(void)
}
-static void lite5200_show_cpuinfo(struct seq_file *m)
-{
- struct device_node* np = of_find_all_nodes(NULL);
- const char *model = NULL;
-
- if (np)
- model = of_get_property(np, "model", NULL);
-
- seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
- seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown");
-
- of_node_put(np);
-}
-
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
@@ -193,6 +193,5 @@ define_machine(lite5200) {
.init = mpc52xx_declare_of_platform_devices,
.init_IRQ = mpc52xx_init_irq,
.get_irq = mpc52xx_get_irq,
- .show_cpuinfo = lite5200_show_cpuinfo,
.calibrate_decr = generic_calibrate_decr,
};