diff options
Diffstat (limited to 'arch/powerpc/platforms')
| -rw-r--r-- | arch/powerpc/platforms/82xx/Kconfig | 50 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/Kconfig | 6 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/Kconfig | 29 | ||||
| -rw-r--r-- | arch/powerpc/platforms/86xx/Kconfig | 18 | ||||
| -rw-r--r-- | arch/powerpc/platforms/8xx/Kconfig | 67 | ||||
| -rw-r--r-- | arch/powerpc/platforms/Kconfig | 58 |
6 files changed, 99 insertions, 129 deletions
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 411071686f2..de7fce9cb6e 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -1,56 +1,36 @@ -menu "Platform support" - depends on PPC_82xx - choice - prompt "Machine Type" - default MPC82xx_ADS + prompt "Machine Type" + depends on PPC_82xx + default MPC82xx_ADS config MPC82xx_ADS - bool "Freescale MPC82xx ADS" - select DEFAULT_UIMAGE - select PQ2ADS - select 8272 - select 8260 - select CPM2 - select FSL_SOC - help - This option enables support for the MPC8272 ADS board + bool "Freescale MPC82xx ADS" + select DEFAULT_UIMAGE + select PQ2ADS + select 8272 + select 8260 + select FSL_SOC + help + This option enables support for the MPC8272 ADS board endchoice config PQ2ADS bool - depends on ADS8272 - default y - -config ADS8272 - bool + default n config 8260 - bool "CPM2 Support" if WILLOW + bool depends on 6xx - default y if PQ2FADS + select CPM2 help - The MPC8260 is a typical embedded CPU made by Motorola. Selecting + The MPC8260 is a typical embedded CPU made by Freescale. Selecting this option means that you wish to build a kernel for a machine with an 8260 class CPU. config 8272 bool - depends on 6xx - default y if ADS8272 select 8260 help The MPC8272 CPM has a different internal dpram setup than other CPM2 devices - -config CPM2 - bool - depends on 8260 || MPC8560 || MPC8555 - default y - help - The CPM2 (Communications Processor Module) is a coprocessor on - embedded CPUs made by Motorola. Selecting this option means that - you wish to build a kernel for a machine with a CPM2 coprocessor - on it (826x, 827x, 8560). -endmenu diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 2a23392bb92..19cafdf6df9 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -1,8 +1,6 @@ -menu "Platform support" - depends on PPC_83xx - choice prompt "Machine Type" + depends on PPC_83xx default MPC834x_MDS config MPC8313_RDB @@ -77,5 +75,3 @@ config PPC_MPC836x select PPC_UDBG_16550 select PPC_INDIRECT_PCI default y if MPC836x_MDS - -endmenu diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 329fcd48669..629926e01e9 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -1,8 +1,6 @@ -menu "Platform support" - depends on PPC_85xx - choice prompt "Machine Type" + depends on PPC_85xx default MPC8540_ADS config MPC8540_ADS @@ -46,34 +44,15 @@ config MPC8540 config MPC8560 bool - select PPC_INDIRECT_PCI + select CPM2 default y if MPC8560_ADS config MPC85xx bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI + select PPC_INDIRECT_PCI_BE + select MPIC select SERIAL_8250_SHARE_IRQ if SERIAL_8250 default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \ || MPC85xx_MDS || MPC8544_DS - -config PPC_INDIRECT_PCI_BE - bool - depends on PPC_85xx - default y - -config MPIC - bool - default y - -config CPM2 - bool - depends on MPC8560 - default y - help - The CPM2 (Communications Processor Module) is a coprocessor on - embedded CPUs made by Motorola. Selecting this option means that - you wish to build a kernel for a machine with a CPM2 coprocessor - on it. - -endmenu diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 0c70944d0e3..d1bcff50046 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -1,8 +1,6 @@ -menu "Platform Support" - depends on PPC_86xx - choice prompt "Machine Type" + depends on PPC_86xx default MPC8641_HPCN config MPC8641_HPCN @@ -14,20 +12,10 @@ config MPC8641_HPCN endchoice - config MPC8641 bool select PPC_INDIRECT_PCI + select PPC_INDIRECT_PCI_BE select PPC_UDBG_16550 + select MPIC default y if MPC8641_HPCN - -config MPIC - bool - default y - -config PPC_INDIRECT_PCI_BE - bool - depends on PPC_86xx - default y - -endmenu diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index beea6834bb7..39bb8c5ebe7 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -1,6 +1,3 @@ -menu "Platform support" - depends on PPC_8xx - config FADS bool @@ -9,6 +6,7 @@ config CPM1 choice prompt "8xx Machine Type" + depends on PPC_8xx depends on 8xx default MPC885ADS @@ -36,38 +34,36 @@ config MPC885ADS endchoice menu "Freescale Ethernet driver platform-specific options" - depends on (FS_ENET && MPC885ADS) - - config MPC8xx_SECOND_ETH - bool "Second Ethernet channel" - depends on MPC885ADS - default y - help - This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. - The latter will use SCC1, for 885ADS you can select it below. - - choice - prompt "Second Ethernet channel" - depends on MPC8xx_SECOND_ETH - default MPC8xx_SECOND_ETH_FEC2 - - config MPC8xx_SECOND_ETH_FEC2 - bool "FEC2" - depends on MPC885ADS - help - Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 - (often 2-nd UART) will not work if this is enabled. - - config MPC8xx_SECOND_ETH_SCC3 - bool "SCC3" - depends on MPC885ADS - help - Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 - (often 1-nd UART) will not work if this is enabled. - - endchoice + depends on (FS_ENET && MPC885ADS) -endmenu + config MPC8xx_SECOND_ETH + bool "Second Ethernet channel" + depends on MPC885ADS + default y + help + This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. + The latter will use SCC1, for 885ADS you can select it below. + + choice + prompt "Second Ethernet channel" + depends on MPC8xx_SECOND_ETH + default MPC8xx_SECOND_ETH_FEC2 + + config MPC8xx_SECOND_ETH_FEC2 + bool "FEC2" + depends on MPC885ADS + help + Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 + (often 2-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC3 + bool "SCC3" + depends on MPC885ADS + help + Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + endchoice endmenu @@ -98,7 +94,7 @@ config 8xx_CPU6 require workarounds for Linux (and most other OSes to work). If you get a BUG() very early in boot, this might fix the problem. For more details read the document entitled "MPC860 Family Device Errata - Reference" on Motorola's website. This option also incurs a + Reference" on Freescale's website. This option also incurs a performance hit. If in doubt, say N here. @@ -135,4 +131,3 @@ config UCODE_PATCH depends on !NO_UCODE_PATCH endmenu - diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 161ab797ad4..86be82a4b9e 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -1,8 +1,8 @@ menu "Platform support" - depends on PPC64 || CLASSIC32 choice prompt "Machine type" + depends on PPC64 || CLASSIC32 default PPC_MULTIPLATFORM config PPC_MULTIPLATFORM @@ -25,14 +25,6 @@ config APUS <http://linux-apus.sourceforge.net/>. endchoice -config QUICC_ENGINE - bool - help - The QUICC Engine (QE) is a new generation of communications - coprocessors on Freescale embedded CPUs (akin to CPM in older chips). - Selecting this option means that you wish to build a kernel - for a machine with a QE coprocessor. - source "arch/powerpc/platforms/pseries/Kconfig" source "arch/powerpc/platforms/iseries/Kconfig" source "arch/powerpc/platforms/chrp/Kconfig" @@ -41,9 +33,16 @@ source "arch/powerpc/platforms/powermac/Kconfig" source "arch/powerpc/platforms/prep/Kconfig" source "arch/powerpc/platforms/maple/Kconfig" source "arch/powerpc/platforms/pasemi/Kconfig" -source arch/powerpc/platforms/celleb/Kconfig -source arch/powerpc/platforms/ps3/Kconfig -source arch/powerpc/platforms/cell/Kconfig +source "arch/powerpc/platforms/celleb/Kconfig" +source "arch/powerpc/platforms/ps3/Kconfig" +source "arch/powerpc/platforms/cell/Kconfig" +source "arch/powerpc/platforms/8xx/Kconfig" +source "arch/powerpc/platforms/82xx/Kconfig" +source "arch/powerpc/platforms/83xx/Kconfig" +source "arch/powerpc/platforms/85xx/Kconfig" +source "arch/powerpc/platforms/86xx/Kconfig" +source "arch/powerpc/platforms/embedded6xx/Kconfig" +#source "arch/powerpc/platforms/4xx/Kconfig config PPC_NATIVE bool @@ -68,6 +67,18 @@ config XICS bool default y +config MPIC + bool + default n + +config MPIC_WEIRD + bool + default n + +config PPC_I8259 + bool + default n + config U3_DART bool depends on PPC_MULTIPLATFORM && PPC64 @@ -137,6 +148,9 @@ config GENERIC_IOMAP bool default n +menu "CPU Frequency support" + depends on PPC64 || CLASSIC32 + source "drivers/cpufreq/Kconfig" config CPU_FREQ_PMAC @@ -155,6 +169,7 @@ config CPU_FREQ_PMAC64 help This adds support for frequency switching on Apple iMac G5, and some of the more recent desktop G5 machines as well. +endmenu config PPC601_SYNC_FIX bool "Workarounds for PPC601 bugs" @@ -172,7 +187,7 @@ config PPC601_SYNC_FIX config TAU bool "On-chip CPU temperature sensor support" - depends on 6xx + depends on CLASSIC32 help G3 and G4 processors have an on-chip temperature sensor called the 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die @@ -214,4 +229,21 @@ config TAU_AVERAGE If in doubt, say N here. +config QUICC_ENGINE + bool + help + The QUICC Engine (QE) is a new generation of communications + coprocessors on Freescale embedded CPUs (akin to CPM in older chips). + Selecting this option means that you wish to build a kernel + for a machine with a QE coprocessor. + +config CPM2 + bool + default n + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Freescale. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it (826x, 827x, 8560). + endmenu |