diff options
Diffstat (limited to 'arch/powerpc/platforms')
23 files changed, 10831 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig new file mode 100644 index 00000000000..ed39d6a3d22 --- /dev/null +++ b/arch/powerpc/platforms/4xx/Kconfig @@ -0,0 +1,280 @@ +config 4xx + bool + depends on 40x || 44x + default y + +config WANT_EARLY_SERIAL + bool + select SERIAL_8250 + default n + +menu "AMCC 4xx options" + depends on 4xx + +choice + prompt "Machine Type" + depends on 40x + default WALNUT + +config BUBINGA + bool "Bubinga" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM 405EP evaluation board. + +config CPCI405 + bool "CPCI405" + help + This option enables support for the CPCI405 board. + +config EP405 + bool "EP405/EP405PC" + help + This option enables support for the EP405/EP405PC boards. + +config REDWOOD_5 + bool "Redwood-5" + help + This option enables support for the IBM STB04 evaluation board. + +config REDWOOD_6 + bool "Redwood-6" + help + This option enables support for the IBM STBx25xx evaluation board. + +config SYCAMORE + bool "Sycamore" + help + This option enables support for the IBM PPC405GPr evaluation board. + +config WALNUT + bool "Walnut" + help + This option enables support for the IBM PPC405GP evaluation board. + +config XILINX_ML300 + bool "Xilinx-ML300" + help + This option enables support for the Xilinx ML300 evaluation board. + +endchoice + +choice + prompt "Machine Type" + depends on 44x + default EBONY + +config BAMBOO + bool "Bamboo" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM PPC440EP evaluation board. + +config EBONY + bool "Ebony" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM PPC440GP evaluation board. + +config LUAN + bool "Luan" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM PPC440SP evaluation board. + +config OCOTEA + bool "Ocotea" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM PPC440GX evaluation board. + +endchoice + +config EP405PC + bool "EP405PC Support" + depends on EP405 + + +# It's often necessary to know the specific 4xx processor type. +# Fortunately, it is impled (so far) from the board type, so we +# don't need to ask more redundant questions. +config NP405H + bool + depends on ASH + default y + +config 440EP + bool + depends on BAMBOO + select PPC_FPU + default y + +config 440GP + bool + depends on EBONY + default y + +config 440GX + bool + depends on OCOTEA + default y + +config 440SP + bool + depends on LUAN + default y + +config 440 + bool + depends on 440GP || 440SP || 440EP + default y + +config 440A + bool + depends on 440GX + default y + +config IBM440EP_ERR42 + bool + depends on 440EP + default y + +# All 405-based cores up until the 405GPR and 405EP have this errata. +config IBM405_ERR77 + bool + depends on 40x && !403GCX && !405GPR && !405EP + default y + +# All 40x-based cores, up until the 405GPR and 405EP have this errata. +config IBM405_ERR51 + bool + depends on 40x && !405GPR && !405EP + default y + +config BOOKE + bool + depends on 44x + default y + +config IBM_OCP + bool + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + default y + +config XILINX_OCP + bool + depends on XILINX_ML300 + default y + +config IBM_EMAC4 + bool + depends on 440GX || 440SP + default y + +config BIOS_FIXUP + bool + depends on BUBINGA || EP405 || SYCAMORE || WALNUT + default y + +# OAK doesn't exist but wanted to keep this around for any future 403GCX boards +config 403GCX + bool + depends OAK + default y + +config 405EP + bool + depends on BUBINGA + default y + +config 405GP + bool + depends on CPCI405 || EP405 || WALNUT + default y + +config 405GPR + bool + depends on SYCAMORE + default y + +config VIRTEX_II_PRO + bool + depends on XILINX_ML300 + default y + +config STB03xxx + bool + depends on REDWOOD_5 || REDWOOD_6 + default y + +config EMBEDDEDBOOT + bool + depends on EP405 || XILINX_ML300 + default y + +config IBM_OPENBIOS + bool + depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + default y + +config PPC4xx_DMA + bool "PPC4xx DMA controller support" + depends on 4xx + +config PPC4xx_EDMA + bool + depends on !STB03xxx && PPC4xx_DMA + default y + +config PPC_GEN550 + bool + depends on 4xx + default y + +choice + prompt "TTYS0 device and default console" + depends on 40x + default UART0_TTYS0 + +config UART0_TTYS0 + bool "UART0" + +config UART0_TTYS1 + bool "UART1" + +endchoice + +config SERIAL_SICC + bool "SICC Serial port support" + depends on STB03xxx + +config UART1_DFLT_CONSOLE + bool + depends on SERIAL_SICC && UART0_TTYS1 + default y + +config SERIAL_SICC_CONSOLE + bool + depends on SERIAL_SICC && UART0_TTYS1 + default y +endmenu + + +menu "IBM 40x options" + depends on 40x + +config SERIAL_SICC + bool "SICC Serial port" + depends on STB03xxx + +config UART1_DFLT_CONSOLE + bool + depends on SERIAL_SICC && UART0_TTYS1 + default y + +config SERIAL_SICC_CONSOLE + bool + depends on SERIAL_SICC && UART0_TTYS1 + default y + +endmenu diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig new file mode 100644 index 00000000000..c5bc2821d99 --- /dev/null +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -0,0 +1,86 @@ +config 85xx + bool + depends on E500 + default y + +config PPC_INDIRECT_PCI_BE + bool + depends on 85xx + default y + +menu "Freescale 85xx options" + depends on E500 + +choice + prompt "Machine Type" + depends on 85xx + default MPC8540_ADS + +config MPC8540_ADS + bool "Freescale MPC8540 ADS" + help + This option enables support for the MPC 8540 ADS evaluation board. + +config MPC8548_CDS + bool "Freescale MPC8548 CDS" + help + This option enablese support for the MPC8548 CDS evaluation board. + +config MPC8555_CDS + bool "Freescale MPC8555 CDS" + help + This option enablese support for the MPC8555 CDS evaluation board. + +config MPC8560_ADS + bool "Freescale MPC8560 ADS" + help + This option enables support for the MPC 8560 ADS evaluation board. + +config SBC8560 + bool "WindRiver PowerQUICC III SBC8560" + help + This option enables support for the WindRiver PowerQUICC III + SBC8560 board. + +config STX_GP3 + bool "Silicon Turnkey Express GP3" + help + This option enables support for the Silicon Turnkey Express GP3 + board. + +endchoice + +# It's often necessary to know the specific 85xx processor type. +# Fortunately, it is implied (so far) from the board type, so we +# don't need to ask more redundant questions. +config MPC8540 + bool + depends on MPC8540_ADS + default y + +config MPC8548 + bool + depends on MPC8548_CDS + default y + +config MPC8555 + bool + depends on MPC8555_CDS + default y + +config MPC8560 + bool + depends on SBC8560 || MPC8560_ADS || STX_GP3 + default y + +config 85xx_PCI2 + bool "Supprt for 2nd PCI host controller" + depends on MPC8555_CDS + default y + +config PPC_GEN550 + bool + depends on MPC8540 || SBC8560 || MPC8555 + default y + +endmenu diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig new file mode 100644 index 00000000000..c8c0ba3cf8e --- /dev/null +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -0,0 +1,352 @@ +config FADS + bool + +choice + prompt "8xx Machine Type" + depends on 8xx + default RPXLITE + +config RPXLITE + bool "RPX-Lite" + ---help--- + Single-board computers based around the PowerPC MPC8xx chips and + intended for embedded applications. The following types are + supported: + + RPX-Lite: + Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823. + + RPX-Classic: + Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on + the MPC 860 + + BSE-IP: + Bright Star Engineering ip-Engine. + + TQM823L: + TQM850L: + TQM855L: + TQM860L: + MPC8xx based family of mini modules, half credit card size, + up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports, + 2 x CAN bus interface, ... + Manufacturer: TQ Components, www.tq-group.de + Date of Release: October (?) 1999 + End of Life: not yet :-) + URL: + - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf> + - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf> + - images: <http://www.denx.de/embedded-ppc-en.html> + + FPS850L: + FingerPrint Sensor System (based on TQM850L) + Manufacturer: IKENDI AG, <http://www.ikendi.com/> + Date of Release: November 1999 + End of life: end 2000 ? + URL: see TQM850L + + IVMS8: + MPC860 based board used in the "Integrated Voice Mail System", + Small Version (8 voice channels) + Manufacturer: Speech Design, <http://www.speech-design.de/> + Date of Release: December 2000 (?) + End of life: - + URL: <http://www.speech-design.de/> + + IVML24: + MPC860 based board used in the "Integrated Voice Mail System", + Large Version (24 voice channels) + Manufacturer: Speech Design, <http://www.speech-design.de/> + Date of Release: March 2001 (?) + End of life: - + URL: <http://www.speech-design.de/> + + HERMES: + Hermes-Pro ISDN/LAN router with integrated 8 x hub + Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik + <http://www.multidata.de/> + Date of Release: 2000 (?) + End of life: - + URL: <http://www.multidata.de/english/products/hpro.htm> + + IP860: + VMEBus IP (Industry Pack) carrier board with MPC860 + Manufacturer: MicroSys GmbH, <http://www.microsys.de/> + Date of Release: ? + End of life: - + URL: <http://www.microsys.de/html/ip860.html> + + PCU_E: + PCU = Peripheral Controller Unit, Extended + Manufacturer: Siemens AG, ICN (Information and Communication Networks) + <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html> + Date of Release: April 2001 + End of life: August 2001 + URL: n. a. + +config RPXCLASSIC + bool "RPX-Classic" + help + The RPX-Classic is a single-board computer based on the Motorola + MPC860. It features 16MB of DRAM and a variable amount of flash, + I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two + LEDs. Variants with Ethernet ports exist. Say Y here to support it + directly. + +config BSEIP + bool "BSE-IP" + help + Say Y here to support the Bright Star Engineering ipEngine SBC. + This is a credit-card-sized device featuring a MPC823 processor, + 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video + controller, and two RS232 ports. + +config MPC8XXFADS + bool "FADS" + select FADS + +config MPC86XADS + bool "MPC86XADS" + help + MPC86x Application Development System by Freescale Semiconductor. + The MPC86xADS is meant to serve as a platform for s/w and h/w + development around the MPC86X processor families. + select FADS + +config MPC885ADS + bool "MPC885ADS" + help + Freescale Semiconductor MPC885 Application Development System (ADS). + Also known as DUET. + The MPC885ADS is meant to serve as a platform for s/w and h/w + development around the MPC885 processor family. + +config TQM823L + bool "TQM823L" + help + Say Y here to support the TQM823L, one of an MPC8xx-based family of + mini SBCs (half credit-card size) from TQ Components first released + in late 1999. Technical references are at + <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and + <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at + <http://www.denx.de/embedded-ppc-en.html>. + +config TQM850L + bool "TQM850L" + help + Say Y here to support the TQM850L, one of an MPC8xx-based family of + mini SBCs (half credit-card size) from TQ Components first released + in late 1999. Technical references are at + <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and + <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at + <http://www.denx.de/embedded-ppc-en.html>. + +config TQM855L + bool "TQM855L" + help + Say Y here to support the TQM855L, one of an MPC8xx-based family of + mini SBCs (half credit-card size) from TQ Components first released + in late 1999. Technical references are at + <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and + <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at + <http://www.denx.de/embedded-ppc-en.html>. + +config TQM860L + bool "TQM860L" + help + Say Y here to support the TQM860L, one of an MPC8xx-based family of + mini SBCs (half credit-card size) from TQ Components first released + in late 1999. Technical references are at + <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and + <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at + <http://www.denx.de/embedded-ppc-en.html>. + +config FPS850L + bool "FPS850L" + +config IVMS8 + bool "IVMS8" + help + Say Y here to support the Integrated Voice-Mail Small 8-channel SBC + from Speech Design, released March 2001. The manufacturer's website + is at <http://www.speech-design.de/>. + +config IVML24 + bool "IVML24" + help + Say Y here to support the Integrated Voice-Mail Large 24-channel SBC + from Speech Design, released March 2001. The manufacturer's website + is at <http://www.speech-design.de/>. + +config HERMES_PRO + bool "HERMES" + +config IP860 + bool "IP860" + +config LWMON + bool "LWMON" + +config PCU_E + bool "PCU_E" + +config CCM + bool "CCM" + +config LANTEC + bool "LANTEC" + +config MBX + bool "MBX" + help + MBX is a line of Motorola single-board computer based around the + MPC821 and MPC860 processors, and intended for embedded-controller + applications. Say Y here to support these boards directly. + +config WINCEPT + bool "WinCept" + help + The Wincept 100/110 is a Motorola single-board computer based on the + MPC821 PowerPC, introduced in 1998 and designed to be used in + thin-client machines. Say Y to support it directly. + +endchoice + +# +# MPC8xx Communication options +# + +menu "MPC8xx CPM Options" + depends on 8xx + +config SCC_ENET + bool "CPM SCC Ethernet" + depends on NET_ETHERNET + help + Enable Ethernet support via the Motorola MPC8xx serial + communications controller. + +choice + prompt "SCC used for Ethernet" + depends on SCC_ENET + default SCC1_ENET + +config SCC1_ENET + bool "SCC1" + help + Use MPC8xx serial communications controller 1 to drive Ethernet + (default). + +config SCC2_ENET + bool "SCC2" + help + Use MPC8xx serial communications controller 2 to drive Ethernet. + +config SCC3_ENET + bool "SCC3" + help + Use MPC8xx serial communications controller 3 to drive Ethernet. + +endchoice + +config FEC_ENET + bool "860T FEC Ethernet" + depends on NET_ETHERNET + help + Enable Ethernet support via the Fast Ethernet Controller (FCC) on + the Motorola MPC8260. + +config USE_MDIO + bool "Use MDIO for PHY configuration" + depends on FEC_ENET + help + On some boards the hardware configuration of the ethernet PHY can be + used without any software interaction over the MDIO interface, so + all MII code can be omitted. Say N here if unsure or if you don't + need link status reports. + +config FEC_AM79C874 + bool "Support AMD79C874 PHY" + depends on USE_MDIO + +config FEC_LXT970 + bool "Support LXT970 PHY" + depends on USE_MDIO + +config FEC_LXT971 + bool "Support LXT971 PHY" + depends on USE_MDIO + +config FEC_QS6612 + bool "Support QS6612 PHY" + depends on USE_MDIO + +config ENET_BIG_BUFFERS + bool "Use Big CPM Ethernet Buffers" + depends on SCC_ENET || FEC_ENET + help + Allocate large buffers for MPC8xx Ethernet. Increases throughput + and decreases the likelihood of dropped packets, but costs memory. + +config HTDMSOUND + bool "Embedded Planet HIOX Audio" + depends on SOUND=y + +# This doesn't really belong here, but it is convenient to ask +# 8xx specific questions. +comment "Generic MPC8xx Options" + +config 8xx_COPYBACK + bool "Copy-Back Data Cache (else Writethrough)" + help + Saying Y here will cause the cache on an MPC8xx processor to be used + in Copy-Back mode. If you say N here, it is used in Writethrough + mode. + + If in doubt, say Y here. + +config 8xx_CPU6 + bool "CPU6 Silicon Errata (860 Pre Rev. C)" + help + MPC860 CPUs, prior to Rev C have some bugs in the silicon, which + require workarounds for Linux (and most other OSes to work). If you + get a BUG() very early in boot, this might fix the problem. For + more details read the document entitled "MPC860 Family Device Errata + Reference" on Motorola's website. This option also incurs a + performance hit. + + If in doubt, say N here. + +choice + prompt "Microcode patch selection" + default NO_UCODE_PATCH + help + Help not implemented yet, coming soon. + +config NO_UCODE_PATCH + bool "None" + +config USB_SOF_UCODE_PATCH + bool "USB SOF patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_UCODE_PATCH + bool "I2C/SPI relocation patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_SMC1_UCODE_PATCH + bool "I2C/SPI/SMC1 relocation patch" + help + Help not implemented yet, coming soon. + +endchoice + +config UCODE_PATCH + bool + default y + depends on !NO_UCODE_PATCH + +endmenu + diff --git a/arch/powerpc/platforms/apus/Kconfig b/arch/powerpc/platforms/apus/Kconfig new file mode 100644 index 00000000000..6bde3bffed8 --- /dev/null +++ b/arch/powerpc/platforms/apus/Kconfig @@ -0,0 +1,130 @@ + +config AMIGA + bool + depends on APUS + default y + help + This option enables support for the Amiga series of computers. + +config ZORRO + bool + depends on APUS + default y + help + This enables support for the Zorro bus in the Amiga. If you have + expansion cards in your Amiga that conform to the Amiga + AutoConfig(tm) specification, say Y, otherwise N. Note that even + expansion cards that do not fit in the Zorro slots but fit in e.g. + the CPU slot may fall in this category, so you have to say Y to let + Linux use these. + +config ABSTRACT_CONSOLE + bool + depends on APUS + default y + +config APUS_FAST_EXCEPT + bool + depends on APUS + default y + +config AMIGA_PCMCIA + bool "Amiga 1200/600 PCMCIA support" + depends on APUS && EXPERIMENTAL + help + Include support in the kernel for pcmcia on Amiga 1200 and Amiga + 600. If you intend to use pcmcia cards say Y; otherwise say N. + +config AMIGA_BUILTIN_SERIAL + tristate "Amiga builtin serial support" + depends on APUS + help + If you want to use your Amiga's built-in serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config GVPIOEXT + tristate "GVP IO-Extender support" + depends on APUS + help + If you want to use a GVP IO-Extender serial card in Linux, say Y. + Otherwise, say N. + +config GVPIOEXT_LP + tristate "GVP IO-Extender parallel printer support" + depends on GVPIOEXT + help + Say Y to enable driving a printer from the parallel port on your + GVP IO-Extender card, N otherwise. + +config GVPIOEXT_PLIP + tristate "GVP IO-Extender PLIP support" + depends on GVPIOEXT + help + Say Y to enable doing IP over the parallel port on your GVP + IO-Extender card, N otherwise. + +config MULTIFACE_III_TTY + tristate "Multiface Card III serial support" + depends on APUS + help + If you want to use a Multiface III card's serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config A2232 + tristate "Commodore A2232 serial support (EXPERIMENTAL)" + depends on EXPERIMENTAL && APUS + ---help--- + This option supports the 2232 7-port serial card shipped with the + Amiga 2000 and other Zorro-bus machines, dating from 1989. At + a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip + each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The + ports were connected with 8 pin DIN connectors on the card bracket, + for which 8 pin to DB25 adapters were supplied. The card also had + jumpers internally to toggle various pinning configurations. + + This driver can be built as a module; but then "generic_serial" + will also be built as a module. This has to be loaded before + "ser_a2232". If you want to do this, answer M here. + +config WHIPPET_SERIAL + tristate "Hisoft Whippet PCMCIA serial support" + depends on AMIGA_PCMCIA + help + HiSoft has a web page at <http://www.hisoft.co.uk/>, but there + is no listing for the Whippet in their Amiga section. + +config APNE + tristate "PCMCIA NE2000 support" + depends on AMIGA_PCMCIA + help + If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, + say N. + + To compile this driver as a module, choose M here: the + module will be called apne. + +config SERIAL_CONSOLE + bool "Support for serial port console" + depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y) + +config HEARTBEAT + bool "Use power LED as a heartbeat" + depends on APUS + help + Use the power-on LED on your machine as a load meter. The exact + behavior is platform-dependent, but normally the flash frequency is + a hyperbolic function of the 5-minute load average. + +config PROC_HARDWARE + bool "/proc/hardware support" + depends on APUS + +source "drivers/zorro/Kconfig" + +config PCI_PERMEDIA + bool "PCI for Permedia2" + depends on !4xx && !8xx && APUS diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig new file mode 100644 index 00000000000..4f355143059 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -0,0 +1,313 @@ +choice + prompt "Machine Type" + depends on EMBEDDED6xx + +config APUS + bool "Amiga-APUS" + depends on BROKEN + help + Select APUS if configuring for a PowerUP Amiga. + More information is available at: + <http://linux-apus.sourceforge.net/>. + +config KATANA + bool "Artesyn-Katana" + help + Select KATANA if configuring an Artesyn KATANA 750i or 3750 + cPCI board. + +config WILLOW + bool "Cogent-Willow" + +config CPCI690 + bool "Force-CPCI690" + help + Select CPCI690 if configuring a Force CPCI690 cPCI board. + +config POWERPMC250 + bool "Force-PowerPMC250" + +config CHESTNUT + bool "IBM 750FX Eval board or 750GX Eval board" + help + Select CHESTNUT if configuring an IBM 750FX Eval Board or a + IBM 750GX Eval board. + +config SPRUCE + bool "IBM-Spruce" + +config HDPU + bool "Sky-HDPU" + help + Select HDPU if configuring a Sky Computers Compute Blade. + +config HDPU_FEATURES + depends HDPU + tristate "HDPU-Features" + help + Select to enable HDPU enhanced features. + +config EV64260 + bool "Marvell-EV64260BP" + help + Select EV64260 if configuring a Marvell (formerly Galileo) + EV64260BP Evaluation platform. + +config LOPEC + bool "Motorola-LoPEC" + +config MVME5100 + bool "Motorola-MVME5100" + +config PPLUS + bool "Motorola-PowerPlus" + +config PRPMC750 + bool "Motorola-PrPMC750" + +config PRPMC800 + bool "Motorola-PrPMC800" + +config SANDPOINT + bool "Motorola-Sandpoint" + help + Select SANDPOINT if configuring for a Motorola Sandpoint X3 + (any flavor). + +config RADSTONE_PPC7D + bool "Radstone Technology PPC7D board" + +config PAL4 + bool "SBS-Palomar4" + +config GEMINI + bool "Synergy-Gemini" + depends on BROKEN + help + Select Gemini if configuring for a Synergy Microsystems' Gemini + series Single Board Computer. More information is available at: + <http://www.synergymicro.com/PressRel/97_10_15.html>. + +config EST8260 + bool "EST8260" + ---help--- + The EST8260 is a single-board computer manufactured by Wind River + Systems, Inc. (formerly Embedded Support Tools Corp.) and based on + the MPC8260. Wind River Systems has a website at + <http://www.windriver.com/>, but the EST8260 cannot be found on it + and has probably been discontinued or rebadged. + +config SBC82xx + bool "SBC82xx" + ---help--- + SBC PowerQUICC II, single-board computer with MPC82xx CPU + Manufacturer: Wind River Systems, Inc. + Date of Release: May 2003 + End of Life: - + URL: <http://www.windriver.com/> + +config SBS8260 + bool "SBS8260" + +config RPX8260 + bool "RPXSUPER" + +config TQM8260 + bool "TQM8260" + ---help--- + MPC8260 based module, little larger than credit card, + up to 128 MB global + 64 MB local RAM, 32 MB Flash, + 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet, + 2 x serial ports, ... + Manufacturer: TQ Components, www.tq-group.de + Date of Release: June 2001 + End of Life: not yet :-) + URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf> + +config ADS8272 + bool "ADS8272" + +config PQ2FADS + bool "Freescale-PQ2FADS" + help + Select PQ2FADS if you wish to configure for a Freescale + PQ2FADS board (-VR or -ZU). + +config LITE5200 + bool "Freescale LITE5200 / (IceCube)" + select PPC_MPC52xx + help + Support for the LITE5200 dev board for the MPC5200 from Freescale. + This is for the LITE5200 version 2.0 board. Don't know if it changes + much but it's only been tested on this board version. I think this + board is also known as IceCube. + +config MPC834x_SYS + bool "Freescale MPC834x SYS" + help + This option enables support for the MPC 834x SYS evaluation board. + + Be aware that PCI buses can only function when SYS board is plugged + into the PIB (Platform IO Board) board from Freescale which provide + 3 PCI slots. The PIBs PCI initialization is the bootloader's + responsiblilty. + +config EV64360 + bool "Marvell-EV64360BP" + help + Select EV64360 if configuring a Marvell EV64360BP Evaluation + platform. +endchoice + +config PQ2ADS + bool + depends on ADS8272 + default y + +config TQM8xxL + bool + depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) + default y + +config PPC_MPC52xx + bool + +config 8260 + bool "CPM2 Support" if WILLOW + depends on 6xx + default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS + help + The MPC8260 is a typical embedded CPU made by Motorola. Selecting + this option means that you wish to build a kernel for a machine with + an 8260 class CPU. + +config 8272 + bool + depends on 6xx + default y if ADS8272 + select 8260 + help + The MPC8272 CPM has a different internal dpram setup than other CPM2 + devices + +config 83xx + bool + default y if MPC834x_SYS + +config MPC834x + bool + default y if MPC834x_SYS + +config CPM2 + bool + depends on 8260 || MPC8560 || MPC8555 + default y + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it (826x, 827x, 8560). + +config PPC_GEN550 + bool + depends on SANDPOINT || SPRUCE || PPLUS || \ + PRPMC750 || PRPMC800 || LOPEC || \ + (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ + 83xx + default y + +config FORCE + bool + depends on 6xx && POWERPMC250 + default y + +config GT64260 + bool + depends on EV64260 || CPCI690 + default y + +config MV64360 # Really MV64360 & MV64460 + bool + depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360 + default y + +config MV64X60 + bool + depends on (GT64260 || MV64360) + default y + +menu "Set bridge options" + depends on MV64X60 + +config NOT_COHERENT_CACHE + bool "Turn off Cache Coherency" + default n + help + Some 64x60 bridges lock up when trying to enforce cache coherency. + When this option is selected, cache coherency will be turned off. + Note that this can cause other problems (e.g., stale data being + speculatively loaded via a cached mapping). Use at your own risk. + +config MV64X60_BASE + hex "Set bridge base used by firmware" + default "0xf1000000" + help + A firmware can leave the base address of the bridge's registers at + a non-standard location. If so, set this value to reflect the + address of that non-standard location. + +config MV64X60_NEW_BASE + hex "Set bridge base used by kernel" + default "0xf1000000" + help + If the current base address of the bridge's registers is not where + you want it, set this value to the address that you want it moved to. + +endmenu + +config NONMONARCH_SUPPORT + bool "Enable Non-Monarch Support" + depends on PRPMC800 + +config HARRIER + bool + depends on PRPMC800 + default y + +config EPIC_SERIAL_MODE + bool + depends on 6xx && (LOPEC || SANDPOINT) + default y + +config MPC10X_BRIDGE + bool + depends on POWERPMC250 || LOPEC || SANDPOINT + default y + +config MPC10X_OPENPIC + bool + depends on POWERPMC250 || LOPEC || SANDPOINT + default y + +config MPC10X_STORE_GATHERING + bool "Enable MPC10x store gathering" + depends on MPC10X_BRIDGE + +config SANDPOINT_ENABLE_UART1 + bool "Enable DUART mode on Sandpoint" + depends on SANDPOINT + help + If this option is enabled then the MPC824x processor will run + in DUART mode instead of UART mode. + +config HARRIER_STORE_GATHERING + bool "Enable Harrier store gathering" + depends on HARRIER + +config MVME5100_IPMC761_PRESENT + bool "MVME5100 configured with an IPMC761" + depends on MVME5100 + +config SPRUCE_BAUD_33M + bool "Spruce baud clock support" + depends on SPRUCE diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig new file mode 100644 index 00000000000..3d957a30c8c --- /dev/null +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -0,0 +1,31 @@ + +menu "iSeries device drivers" + depends on PPC_ISERIES + +config VIOCONS + tristate "iSeries Virtual Console Support" + +config VIODASD + tristate "iSeries Virtual I/O disk support" + help + If you are running on an iSeries system and you want to use + virtual disks created and managed by OS/400, say Y. + +config VIOCD + tristate "iSeries Virtual I/O CD support" + help + If you are running Linux on an IBM iSeries system and you want to + read a CD drive owned by OS/400, say Y here. + +config VIOTAPE + tristate "iSeries Virtual Tape Support" + help + If you are running Linux on an iSeries system and you want Linux + to read and/or write a tape drive owned by OS/400, say Y here. + +endmenu + +config VIOPATH + bool + depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH + default y diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile new file mode 100644 index 00000000000..37b7341396e --- /dev/null +++ b/arch/powerpc/platforms/powermac/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_PPC_PMAC) += pmac_pic.o pmac_setup.o pmac_time.o \ + pmac_feature.o pmac_pci.o pmac_sleep.o \ + pmac_low_i2c.o pmac_cache.o +obj-$(CONFIG_PMAC_BACKLIGHT) += pmac_backlight.o +obj-$(CONFIG_CPU_FREQ_PMAC) += pmac_cpufreq.o +ifeq ($(CONFIG_PPC_PMAC),y) +obj-$(CONFIG_NVRAM) += pmac_nvram.o +obj-$(CONFIG_SMP) += pmac_smp.o +endif diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h new file mode 100644 index 00000000000..40e1c5030f7 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -0,0 +1,31 @@ +#ifndef __PMAC_H__ +#define __PMAC_H__ + +#include <linux/pci.h> +#include <linux/ide.h> + +/* + * Declaration for the various functions exported by the + * pmac_* files. Mostly for use by pmac_setup + */ + +extern void pmac_get_boot_time(struct rtc_time *tm); +extern void pmac_get_rtc_time(struct rtc_time *tm); +extern int pmac_set_rtc_time(struct rtc_time *tm); +extern void pmac_read_rtc_time(void); +extern void pmac_calibrate_decr(void); + +extern void pmac_pcibios_fixup(void); +extern void pmac_pci_init(void); +extern void pmac_setup_pci_dma(void); +extern void pmac_check_ht_link(void); + +extern void pmac_setup_smp(void); + +extern unsigned long pmac_ide_get_base(int index); +extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, + unsigned long data_port, unsigned long ctrl_port, int *irq); + +extern void pmac_nvram_init(void); + +#endif /* __PMAC_H__ */ diff --git a/arch/powerpc/platforms/powermac/pmac_backlight.c b/arch/powerpc/platforms/powermac/pmac_backlight.c new file mode 100644 index 00000000000..8be2f7d071f --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_backlight.c @@ -0,0 +1,202 @@ +/* + * Miscellaneous procedures for dealing with the PowerMac hardware. + * Contains support for the backlight. + * + * Copyright (C) 2000 Benjamin Herrenschmidt + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/stddef.h> +#include <linux/reboot.h> +#include <linux/nvram.h> +#include <linux/console.h> +#include <asm/sections.h> +#include <asm/ptrace.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/nvram.h> +#include <asm/backlight.h> + +#include <linux/adb.h> +#include <linux/pmu.h> + +static struct backlight_controller *backlighter; +static void* backlighter_data; +static int backlight_autosave; +static int backlight_level = BACKLIGHT_MAX; +static int backlight_enabled = 1; +static int backlight_req_level = -1; +static int backlight_req_enable = -1; + +static void backlight_callback(void *); +static DECLARE_WORK(backlight_work, backlight_callback, NULL); + +void register_backlight_controller(struct backlight_controller *ctrler, + void *data, char *type) +{ + struct device_node* bk_node; + char *prop; + int valid = 0; + + /* There's already a matching controller, bail out */ + if (backlighter != NULL) + return; + + bk_node = find_devices("backlight"); + +#ifdef CONFIG_ADB_PMU + /* Special case for the old PowerBook since I can't test on it */ + backlight_autosave = machine_is_compatible("AAPL,3400/2400") + || machine_is_compatible("AAPL,3500"); + if ((backlight_autosave + || machine_is_compatible("AAPL,PowerBook1998") + || machine_is_compatible("PowerBook1,1")) + && !strcmp(type, "pmu")) + valid = 1; +#endif + if (bk_node) { + prop = get_property(bk_node, "backlight-control", NULL); + if (prop && !strncmp(prop, type, strlen(type))) + valid = 1; + } + if (!valid) + return; + backlighter = ctrler; + backlighter_data = data; + + if (bk_node && !backlight_autosave) + prop = get_property(bk_node, "bklt", NULL); + else + prop = NULL; + if (prop) { + backlight_level = ((*prop)+1) >> 1; + if (backlight_level > BACKLIGHT_MAX) + backlight_level = BACKLIGHT_MAX; + } + +#ifdef CONFIG_ADB_PMU + if (backlight_autosave) { + struct adb_request req; + pmu_request(&req, NULL, 2, 0xd9, 0); + while (!req.complete) + pmu_poll(); + backlight_level = req.reply[0] >> 4; + } +#endif + acquire_console_sem(); + if (!backlighter->set_enable(1, backlight_level, data)) + backlight_enabled = 1; + release_console_sem(); + + printk(KERN_INFO "Registered \"%s\" backlight controller," + "level: %d/15\n", type, backlight_level); +} +EXPORT_SYMBOL(register_backlight_controller); + +void unregister_backlight_controller(struct backlight_controller + *ctrler, void *data) +{ + /* We keep the current backlight level (for now) */ + if (ctrler == backlighter && data == backlighter_data) + backlighter = NULL; +} +EXPORT_SYMBOL(unregister_backlight_controller); + +static int __set_backlight_enable(int enable) +{ + int rc; + + if (!backlighter) + return -ENODEV; + acquire_console_sem(); + rc = backlighter->set_enable(enable, backlight_level, + backlighter_data); + if (!rc) + backlight_enabled = enable; + release_console_sem(); + return rc; +} +int set_backlight_enable(int enable) +{ + if (!backlighter) + return -ENODEV; + backlight_req_enable = enable; + schedule_work(&backlight_work); + return 0; +} + +EXPORT_SYMBOL(set_backlight_enable); + +int get_backlight_enable(void) +{ + if (!backlighter) + return -ENODEV; + return backlight_enabled; +} +EXPORT_SYMBOL(get_backlight_enable); + +static int __set_backlight_level(int level) +{ + int rc = 0; + + if (!backlighter) + return -ENODEV; + if (level < BACKLIGHT_MIN) + level = BACKLIGHT_OFF; + if (level > BACKLIGHT_MAX) + level = BACKLIGHT_MAX; + acquire_console_sem(); + if (backlight_enabled) + rc = backlighter->set_level(level, backlighter_data); + if (!rc) + backlight_level = level; + release_console_sem(); + if (!rc && !backlight_autosave) { + level <<=1; + if (level & 0x10) + level |= 0x01; + // -- todo: save to property "bklt" + } + return rc; +} +int set_backlight_level(int level) +{ + if (!backlighter) + return -ENODEV; + backlight_req_level = level; + schedule_work(&backlight_work); + return 0; +} + +EXPORT_SYMBOL(set_backlight_level); + +int get_backlight_level(void) +{ + if (!backlighter) + return -ENODEV; + return backlight_level; +} +EXPORT_SYMBOL(get_backlight_level); + +static void backlight_callback(void *dummy) +{ + int level, enable; + + do { + level = backlight_req_level; + enable = backlight_req_enable; + mb(); + + if (level >= 0) + __set_backlight_level(level); + if (enable >= 0) + __set_backlight_enable(enable); + } while(cmpxchg(&backlight_req_level, level, -1) != level || + cmpxchg(&backlight_req_enable, enable, -1) != enable); +} diff --git a/arch/powerpc/platforms/powermac/pmac_cache.S b/arch/powerpc/platforms/powermac/pmac_cache.S new file mode 100644 index 00000000000..fb977de6b70 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_cache.S @@ -0,0 +1,359 @@ +/* + * This file contains low-level cache management functions + * used for sleep and CPU speed changes on Apple machines. + * (In fact the only thing that is Apple-specific is that we assume + * that we can read from ROM at physical address 0xfff00000.) + * + * Copyright (C) 2004 Paul Mackerras (paulus@samba.org) and + * Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/ppc_asm.h> +#include <asm/cputable.h> + +/* + * Flush and disable all data caches (dL1, L2, L3). This is used + * when going to sleep, when doing a PMU based cpufreq transition, + * or when "offlining" a CPU on SMP machines. This code is over + * paranoid, but I've had enough issues with various CPU revs and + * bugs that I decided it was worth beeing over cautious + */ + +_GLOBAL(flush_disable_caches) +#ifndef CONFIG_6xx + blr +#else +BEGIN_FTR_SECTION + b flush_disable_745x +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) +BEGIN_FTR_SECTION + b flush_disable_75x +END_FTR_SECTION_IFSET(CPU_FTR_L2CR) + b __flush_disable_L1 + +/* This is the code for G3 and 74[01]0 */ +flush_disable_75x: + mflr r10 + + /* Turn off EE and DR in MSR */ + mfmsr r11 + rlwinm r0,r11,0,~MSR_EE + rlwinm r0,r0,0,~MSR_DR + sync + mtmsr r0 + isync + + /* Stop DST streams */ +BEGIN_FTR_SECTION + DSSALL + sync +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + + /* Stop DPM */ + mfspr r8,SPRN_HID0 /* Save SPRN_HID0 in r8 */ + rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ + sync + mtspr SPRN_HID0,r4 /* Disable DPM */ + sync + + /* Disp-flush L1. We have a weird problem here that I never + * totally figured out. On 750FX, using the ROM for the flush + * results in a non-working flush. We use that workaround for + * now until I finally understand what's going on. --BenH + */ + + /* ROM base by default */ + lis r4,0xfff0 + mfpvr r3 + srwi r3,r3,16 + cmplwi cr0,r3,0x7000 + bne+ 1f + /* RAM base on 750FX */ + li r4,0 +1: li r4,0x4000 + mtctr r4 +1: lwz r0,0(r4) + addi r4,r4,32 + bdnz 1b + sync + isync + + /* Disable / invalidate / enable L1 data */ + mfspr r3,SPRN_HID0 + rlwinm r3,r3,0,~(HID0_DCE | HID0_ICE) + mtspr SPRN_HID0,r3 + sync + isync + ori r3,r3,(HID0_DCE|HID0_DCI|HID0_ICE|HID0_ICFI) + sync + isync + mtspr SPRN_HID0,r3 + xori r3,r3,(HID0_DCI|HID0_ICFI) + mtspr SPRN_HID0,r3 + sync + + /* Get the current enable bit of the L2CR into r4 */ + mfspr r5,SPRN_L2CR + /* Set to data-only (pre-745x bit) */ + oris r3,r5,L2CR_L2DO@h + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r3 +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: /* disp-flush L2. The interesting thing here is that the L2 can be + * up to 2Mb ... so using the ROM, we'll end up wrapping back to memory + * but that is probbaly fine. We disp-flush over 4Mb to be safe + */ + lis r4,2 + mtctr r4 + lis r4,0xfff0 +1: lwz r0,0(r4) + addi r4,r4,32 + bdnz 1b + sync + isync + lis r4,2 + mtctr r4 + lis r4,0xfff0 +1: dcbf 0,r4 + addi r4,r4,32 + bdnz 1b + sync + isync + + /* now disable L2 */ + rlwinm r5,r5,0,~L2CR_L2E + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r5 +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + /* Invalidate L2. This is pre-745x, we clear the L2I bit ourselves */ + oris r4,r5,L2CR_L2I@h + mtspr SPRN_L2CR,r4 + sync + isync + + /* Wait for the invalidation to complete */ +1: mfspr r3,SPRN_L2CR + rlwinm. r0,r3,0,31,31 + bne 1b + + /* Clear L2I */ + xoris r4,r4,L2CR_L2I@h + sync + mtspr SPRN_L2CR,r4 + sync + + /* now disable the L1 data cache */ + mfspr r0,SPRN_HID0 + rlwinm r0,r0,0,~(HID0_DCE|HID0_ICE) + mtspr SPRN_HID0,r0 + sync + isync + + /* Restore HID0[DPM] to whatever it was before */ + sync + mfspr r0,SPRN_HID0 + rlwimi r0,r8,0,11,11 /* Turn back HID0[DPM] */ + mtspr SPRN_HID0,r0 + sync + + /* restore DR and EE */ + sync + mtmsr r11 + isync + + mtlr r10 + blr + +/* This code is for 745x processors */ +flush_disable_745x: + /* Turn off EE and DR in MSR */ + mfmsr r11 + rlwinm r0,r11,0,~MSR_EE + rlwinm r0,r0,0,~MSR_DR + sync + mtmsr r0 + isync + + /* Stop prefetch streams */ + DSSALL + sync + + /* Disable L2 prefetching */ + mfspr r0,SPRN_MSSCR0 + rlwinm r0,r0,0,0,29 + mtspr SPRN_MSSCR0,r0 + sync + isync + lis r4,0 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + + /* Due to a bug with the HW flush on some CPU revs, we occasionally + * experience data corruption. I'm adding a displacement flush along + * with a dcbf loop over a few Mb to "help". The problem isn't totally + * fixed by this in theory, but at least, in practice, I couldn't reproduce + * it even with a big hammer... + */ + + lis r4,0x0002 + mtctr r4 + li r4,0 +1: + lwz r0,0(r4) + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + isync + + /* Now, flush the first 4MB of memory */ + lis r4,0x0002 + mtctr r4 + li r4,0 + sync +1: + dcbf 0,r4 + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + + /* Flush and disable the L1 data cache */ + mfspr r6,SPRN_LDSTCR + lis r3,0xfff0 /* read from ROM for displacement flush */ + li r4,0xfe /* start with only way 0 unlocked */ + li r5,128 /* 128 lines in each way */ +1: mtctr r5 + rlwimi r6,r4,0,24,31 + mtspr SPRN_LDSTCR,r6 + sync + isync +2: lwz r0,0(r3) /* touch each cache line */ + addi r3,r3,32 + bdnz 2b + rlwinm r4,r4,1,24,30 /* move on to the next way */ + ori r4,r4,1 + cmpwi r4,0xff /* all done? */ + bne 1b + /* now unlock the L1 data cache */ + li r4,0 + rlwimi r6,r4,0,24,31 + sync + mtspr SPRN_LDSTCR,r6 + sync + isync + + /* Flush the L2 cache using the hardware assist */ + mfspr r3,SPRN_L2CR + cmpwi r3,0 /* check if it is enabled first */ + bge 4f + oris r0,r3,(L2CR_L2IO_745x|L2CR_L2DO_745x)@h + b 2f + /* When disabling/locking L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r0 /* lock the L2 cache */ +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + ori r0,r3,L2CR_L2HWF_745x + sync + mtspr SPRN_L2CR,r0 /* set the hardware flush bit */ +3: mfspr r0,SPRN_L2CR /* wait for it to go to 0 */ + andi. r0,r0,L2CR_L2HWF_745x + bne 3b + sync + rlwinm r3,r3,0,~L2CR_L2E + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r3 /* disable the L2 cache */ +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + oris r4,r3,L2CR_L2I@h + mtspr SPRN_L2CR,r4 + sync + isync +1: mfspr r4,SPRN_L2CR + andis. r0,r4,L2CR_L2I@h + bne 1b + sync + +BEGIN_FTR_SECTION + /* Flush the L3 cache using the hardware assist */ +4: mfspr r3,SPRN_L3CR + cmpwi r3,0 /* check if it is enabled */ + bge 6f + oris r0,r3,L3CR_L3IO@h + ori r0,r0,L3CR_L3DO + sync + mtspr SPRN_L3CR,r0 /* lock the L3 cache */ + sync + isync + ori r0,r0,L3CR_L3HWF + sync + mtspr SPRN_L3CR,r0 /* set the hardware flush bit */ +5: mfspr r0,SPRN_L3CR /* wait for it to go to zero */ + andi. r0,r0,L3CR_L3HWF + bne 5b + rlwinm r3,r3,0,~L3CR_L3E + sync + mtspr SPRN_L3CR,r3 /* disable the L3 cache */ + sync + ori r4,r3,L3CR_L3I + mtspr SPRN_L3CR,r4 +1: mfspr r4,SPRN_L3CR + andi. r0,r4,L3CR_L3I + bne 1b + sync +END_FTR_SECTION_IFSET(CPU_FTR_L3CR) + +6: mfspr r0,SPRN_HID0 /* now disable the L1 data cache */ + rlwinm r0,r0,0,~HID0_DCE + mtspr SPRN_HID0,r0 + sync + isync + mtmsr r11 /* restore DR and EE */ + isync + blr +#endif /* CONFIG_6xx */ diff --git a/arch/powerpc/platforms/powermac/pmac_cpufreq.c b/arch/powerpc/platforms/powermac/pmac_cpufreq.c new file mode 100644 index 00000000000..6d32d99402b --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_cpufreq.c @@ -0,0 +1,728 @@ +/* + * arch/ppc/platforms/pmac_cpufreq.c + * + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/i2c.h> +#include <linux/hardirq.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/pmac_feature.h> +#include <asm/mmu_context.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/system.h> +#include <asm/mpic.h> +#include <asm/keylargo.h> + +/* WARNING !!! This will cause calibrate_delay() to be called, + * but this is an __init function ! So you MUST go edit + * init/main.c to make it non-init before enabling DEBUG_FREQ + */ +#undef DEBUG_FREQ + +/* + * There is a problem with the core cpufreq code on SMP kernels, + * it won't recalculate the Bogomips properly + */ +#ifdef CONFIG_SMP +#warning "WARNING, CPUFREQ not recommended on SMP kernels" +#endif + +extern void low_choose_7447a_dfs(int dfs); +extern void low_choose_750fx_pll(int pll); +extern void low_sleep_handler(void); + +/* + * Currently, PowerMac cpufreq supports only high & low frequencies + * that are set by the firmware + */ +static unsigned int low_freq; +static unsigned int hi_freq; +static unsigned int cur_freq; +static unsigned int sleep_freq; + +/* + * Different models uses different mecanisms to switch the frequency + */ +static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); + +/* + * Some definitions used by the various speedprocs + */ +static u32 voltage_gpio; +static u32 frequency_gpio; +static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; +static int is_pmu_based; + +/* There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table pmac_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + +static inline void wakeup_decrementer(void) +{ + set_dec(tb_ticks_per_jiffy); + /* No currently-supported powerbook has a 601, + * so use get_tbl, not native + */ + last_jiffy_stamp(0) = tb_last_stamp = get_tbl(); +} + +#ifdef DEBUG_FREQ +static inline void debug_calc_bogomips(void) +{ + /* This will cause a recalc of bogomips and display the + * result. We backup/restore the value to avoid affecting the + * core cpufreq framework's own calculation. + */ + extern void calibrate_delay(void); + + unsigned long save_lpj = loops_per_jiffy; + calibrate_delay(); + loops_per_jiffy = save_lpj; +} +#endif /* DEBUG_FREQ */ + +/* Switch CPU speed under 750FX CPU control + */ +static int cpu_750fx_cpu_speed(int low_speed) +{ + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } +#ifdef CONFIG_6xx + low_choose_750fx_pll(low_speed); +#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } + + return 0; +} + +static unsigned int cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + +/* Switch CPU speed using DFS */ +static int dfs_set_cpu_speed(int low_speed) +{ + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(1); + } + + /* set frequency */ +#ifdef CONFIG_6xx + low_choose_7447a_dfs(low_speed); +#endif + udelay(100); + + if (low_speed == 1) { + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(1); + } + + return 0; +} + +static unsigned int dfs_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_DFS) + return low_freq; + else + return hi_freq; +} + + +/* Switch CPU speed using slewing GPIOs + */ +static int gpios_set_cpu_speed(int low_speed) +{ + int gpio, timeout = 0; + + /* If ramping up, set voltage first */ + if (low_speed == 0) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + + /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, + low_speed ? 0x04 : 0x05); + udelay(200); + do { + if (++timeout > 100) + break; + local_delay(1); + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); + } while((gpio & 0x02) == 0); + skip: + /* If ramping down, set voltage last */ + if (low_speed == 1) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + return 0; +} + +/* Switch CPU speed under PMU control + */ +static int pmu_set_cpu_speed(int low_speed) +{ + struct adb_request req; + unsigned long save_l2cr; + unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; + + preempt_disable(); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); +#endif + pmu_suspend(); + + /* Disable all interrupt sources on openpic */ + pic_prio = mpic_cpu_get_priority(); + mpic_cpu_set_priority(0xf); + + /* Make sure the decrementer won't interrupt us */ + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + /* Make sure any pending DEC interrupt occuring while we did + * the above didn't re-enable the DEC */ + mb(); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + + /* We can now disable MSR_EE */ + local_irq_save(flags); + + /* Giveup the FPU & vec */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + /* Save & disable L2 and L3 caches */ + save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ + save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ + + /* Send the new speed command. My assumption is that this command + * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep + */ + pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); + while (!req.complete) + pmu_poll(); + + /* Prepare the northbridge for the speed transition */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); + + /* Call low level code to backup CPU state and recover from + * hardware reset + */ + low_sleep_handler(); + + /* Restore the northbridge */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); + + /* Restore L2 cache */ + if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) + _set_L2CR(save_l2cr); + /* Restore L3 cache */ + if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) + _set_L3CR(save_l3cr); + + /* Restore userland MMU context */ + set_context(current->active_mm->context, current->active_mm->pgd); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); +#endif + + /* Restore low level PMU operations */ + pmu_unlock(); + + /* Restore decrementer */ + wakeup_decrementer(); + + /* Restore interrupts */ + mpic_cpu_set_priority(pic_prio); + + /* Let interrupts flow again ... */ + local_irq_restore(flags); + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + pmu_resume(); + + preempt_enable(); + + return 0; +} + +static int do_set_cpu_speed(int speed_mode, int notify) +{ + struct cpufreq_freqs freqs; + unsigned long l3cr; + static unsigned long prev_l3cr; + + freqs.old = cur_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + freqs.cpu = smp_processor_id(); + + if (freqs.old == freqs.new) + return 0; + + if (notify) + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + if (speed_mode == CPUFREQ_LOW && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + if (notify) + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + return 0; +} + +static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + +static int pmac_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); +} + +static int pmac_cpufreq_target( struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + return do_set_cpu_speed(newstate, 1); +} + +unsigned int pmac_get_one_cpufreq(int i) +{ + /* Supports only one CPU for now */ + return (i == 0) ? cur_freq : 0; +} + +static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = cur_freq; + + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); +} + +static u32 read_gpio(struct device_node *np) +{ + u32 *reg = (u32 *)get_property(np, "reg", NULL); + u32 offset; + + if (reg == NULL) + return 0; + /* That works for all keylargos but shall be fixed properly + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. + */ + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(CPUFREQ_HIGH, 0); + return 0; +} + +static int pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); + + no_schedule = 0; + return 0; +} + +static struct cpufreq_driver pmac_cpufreq_driver = { + .verify = pmac_cpufreq_verify, + .target = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, + .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, + .name = "powermac", + .owner = THIS_MODULE, +}; + + +static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np = of_find_node_by_name(NULL, + "voltage-gpio"); + struct device_node *freq_gpio_np = of_find_node_by_name(NULL, + "frequency-gpio"); + struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, + "slewing-done"); + u32 *value; + + /* + * Check to see if it's GPIO driven or PMU only + * + * The way we extract the GPIO address is slightly hackish, but it + * works well enough for now. We need to abstract the whole GPIO + * stuff sooner or later anyway + */ + + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (freq_gpio_np) + frequency_gpio = read_gpio(freq_gpio_np); + if (slew_done_gpio_np) + slew_done_gpio = read_gpio(slew_done_gpio_np); + + /* If we use the frequency GPIOs, calculate the min/max speeds based + * on the bus frequencies + */ + if (frequency_gpio && slew_done_gpio) { + int lenp, rc; + u32 *freqs, *ratio; + + freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp); + lenp /= sizeof(u32); + if (freqs == NULL || lenp != 2) { + printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + return 1; + } + ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL); + if (ratio == NULL) { + printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + return 1; + } + + /* Get the min/max bus frequencies */ + low_freq = min(freqs[0], freqs[1]); + hi_freq = max(freqs[0], freqs[1]); + + /* Grrrr.. It _seems_ that the device-tree is lying on the low bus + * frequency, it claims it to be around 84Mhz on some models while + * it appears to be approx. 101Mhz on all. Let's hack around here... + * fortunately, we don't need to be too precise + */ + if (low_freq < 98000000) + low_freq = 101000000; + + /* Convert those to CPU core clocks */ + low_freq = (low_freq * (*ratio)) / 2000; + hi_freq = (hi_freq * (*ratio)) / 2000; + + /* Now we get the frequencies, we read the GPIO to see what is out current + * speed + */ + rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + cur_freq = (rc & 0x01) ? hi_freq : low_freq; + + set_speed_proc = gpios_set_cpu_speed; + return 1; + } + + /* If we use the PMU, look for the min & max frequencies in the + * device-tree + */ + value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree + * here */ + if (low_freq < 100000) + low_freq *= 10; + + value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL); + if (!value) + return 1; + hi_freq = (*value) / 1000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + + return 0; +} + +static int pmac_cpufreq_init_7447A(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + + if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (!voltage_gpio){ + printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + return 1; + } + + /* OF only reports the high frequency */ + hi_freq = cur_freq; + low_freq = cur_freq/2; + + /* Read actual frequency from CPU */ + cur_freq = dfs_get_cpu_speed(); + set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr, *value; + + if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); + + return 0; +} + +/* Currently, we support the following machines: + * + * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) + * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) + * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) + * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) + * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) + * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) + * - Recent MacRISC3 laptops + * - All new machines with 7447A CPUs + */ +static int __init pmac_cpufreq_setup(void) +{ + struct device_node *cpunode; + u32 *value; + + if (strstr(cmd_line, "nocpufreq")) + return 0; + + /* Assume only one CPU */ + cpunode = find_type_devices("cpu"); + if (!cpunode) + goto out; + + /* Get current cpu clock freq */ + value = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!value) + goto out; + cur_freq = (*value) / 1000; + + /* Check for 7447A based MacRISC3 */ + if (machine_is_compatible("MacRISC3") && + get_property(cpunode, "dynamic-power-step", NULL) && + PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { + pmac_cpufreq_init_7447A(cpunode); + /* Check for other MacRISC3 machines */ + } else if (machine_is_compatible("PowerBook3,4") || + machine_is_compatible("PowerBook3,5") || + machine_is_compatible("MacRISC3")) { + pmac_cpufreq_init_MacRISC3(cpunode); + /* Else check for iBook2 500/600 */ + } else if (machine_is_compatible("PowerBook4,1")) { + hi_freq = cur_freq; + low_freq = 400000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 400 & 500 */ + else if (machine_is_compatible("PowerBook3,2")) { + /* We only know about the 400 MHz and the 500Mhz model + * they both have 300 MHz as low frequency + */ + if (cur_freq < 350000 || cur_freq > 550000) + goto out; + hi_freq = cur_freq; + low_freq = 300000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for 750FX */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); +out: + if (set_speed_proc == NULL) + return -ENODEV; + + pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; + pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + + printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); + + return cpufreq_register_driver(&pmac_cpufreq_driver); +} + +module_init(pmac_cpufreq_setup); + diff --git a/arch/powerpc/platforms/powermac/pmac_feature.c b/arch/powerpc/platforms/powermac/pmac_feature.c new file mode 100644 index 00000000000..2cba670c71b --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_feature.c @@ -0,0 +1,3062 @@ +/* + * arch/ppc/platforms/pmac_feature.c + * + * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) + * Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * TODO: + * + * - Replace mdelay with some schedule loop if possible + * - Shorten some obfuscated delays on some routines (like modem + * power) + * - Refcount some clocks (see darwin) + * - Split split split... + * + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <asm/sections.h> +#include <asm/errno.h> +#include <asm/ohare.h> +#include <asm/heathrow.h> +#include <asm/keylargo.h> +#include <asm/uninorth.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/dbdma.h> +#include <asm/pci-bridge.h> +#include <asm/pmac_low_i2c.h> + +#undef DEBUG_FEATURE + +#ifdef DEBUG_FEATURE +#define DBG(fmt...) printk(KERN_DEBUG fmt) +#else +#define DBG(fmt...) +#endif + +#ifdef CONFIG_6xx +extern int powersave_lowspeed; +#endif + +extern int powersave_nap; +extern struct device_node *k2_skiplist[2]; + + +/* + * We use a single global lock to protect accesses. Each driver has + * to take care of its own locking + */ +static DEFINE_SPINLOCK(feature_lock); + +#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags); +#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags); + + +/* + * Instance of some macio stuffs + */ +struct macio_chip macio_chips[MAX_MACIO_CHIPS]; + +struct macio_chip *macio_find(struct device_node *child, int type) +{ + while(child) { + int i; + + for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++) + if (child == macio_chips[i].of_node && + (!type || macio_chips[i].type == type)) + return &macio_chips[i]; + child = child->parent; + } + return NULL; +} +EXPORT_SYMBOL_GPL(macio_find); + +static const char *macio_names[] = +{ + "Unknown", + "Grand Central", + "OHare", + "OHareII", + "Heathrow", + "Gatwick", + "Paddington", + "Keylargo", + "Pangea", + "Intrepid", + "K2" +}; + + + +/* + * Uninorth reg. access. Note that Uni-N regs are big endian + */ + +#define UN_REG(r) (uninorth_base + ((r) >> 2)) +#define UN_IN(r) (in_be32(UN_REG(r))) +#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) +#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) +#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) + +static struct device_node *uninorth_node; +static u32 __iomem *uninorth_base; +static u32 uninorth_rev; +static int uninorth_u3; +static void __iomem *u3_ht; + +/* + * For each motherboard family, we have a table of functions pointers + * that handle the various features. + */ + +typedef long (*feature_call)(struct device_node *node, long param, long value); + +struct feature_table_entry { + unsigned int selector; + feature_call function; +}; + +struct pmac_mb_def +{ + const char* model_string; + const char* model_name; + int model_id; + struct feature_table_entry* features; + unsigned long board_flags; +}; +static struct pmac_mb_def pmac_mb; + +/* + * Here are the chip specific feature functions + */ + +static inline int simple_feature_tweak(struct device_node *node, int type, + int reg, u32 mask, int value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, type); + if (!macio) + return -ENODEV; + LOCK(flags); + if (value) + MACIO_BIS(reg, mask); + else + MACIO_BIC(reg, mask); + (void)MACIO_IN32(reg); + UNLOCK(flags); + + return 0; +} + +#ifndef CONFIG_POWER4 + +static long ohare_htw_scc_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long chan_mask; + unsigned long fcr; + unsigned long flags; + int htw, trans; + unsigned long rmask; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (!strcmp(node->name, "ch-a")) + chan_mask = MACIO_FLAG_SCCA_ON; + else if (!strcmp(node->name, "ch-b")) + chan_mask = MACIO_FLAG_SCCB_ON; + else + return -ENODEV; + + htw = (macio->type == macio_heathrow || macio->type == macio_paddington + || macio->type == macio_gatwick); + /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */ + trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && + pmac_mb.model_id != PMAC_TYPE_YIKES); + if (value) { +#ifdef CONFIG_ADB_PMU + if ((param & 0xfff) == PMAC_SCC_IRDA) + pmu_enable_irled(1); +#endif /* CONFIG_ADB_PMU */ + LOCK(flags); + fcr = MACIO_IN32(OHARE_FCR); + /* Check if scc cell need enabling */ + if (!(fcr & OH_SCC_ENABLE)) { + fcr |= OH_SCC_ENABLE; + if (htw) { + /* Side effect: this will also power up the + * modem, but it's too messy to figure out on which + * ports this controls the tranceiver and on which + * it controls the modem + */ + if (trans) + fcr &= ~HRW_SCC_TRANS_EN_N; + MACIO_OUT32(OHARE_FCR, fcr); + fcr |= (rmask = HRW_RESET_SCC); + MACIO_OUT32(OHARE_FCR, fcr); + } else { + fcr |= (rmask = OH_SCC_RESET); + MACIO_OUT32(OHARE_FCR, fcr); + } + UNLOCK(flags); + (void)MACIO_IN32(OHARE_FCR); + mdelay(15); + LOCK(flags); + fcr &= ~rmask; + MACIO_OUT32(OHARE_FCR, fcr); + } + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr |= OH_SCCA_IO; + if (chan_mask & MACIO_FLAG_SCCB_ON) + fcr |= OH_SCCB_IO; + MACIO_OUT32(OHARE_FCR, fcr); + macio->flags |= chan_mask; + UNLOCK(flags); + if (param & PMAC_SCC_FLAG_XMON) + macio->flags |= MACIO_FLAG_SCC_LOCKED; + } else { + if (macio->flags & MACIO_FLAG_SCC_LOCKED) + return -EPERM; + LOCK(flags); + fcr = MACIO_IN32(OHARE_FCR); + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr &= ~OH_SCCA_IO; + if (chan_mask & MACIO_FLAG_SCCB_ON) + fcr &= ~OH_SCCB_IO; + MACIO_OUT32(OHARE_FCR, fcr); + if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) { + fcr &= ~OH_SCC_ENABLE; + if (htw && trans) + fcr |= HRW_SCC_TRANS_EN_N; + MACIO_OUT32(OHARE_FCR, fcr); + } + macio->flags &= ~(chan_mask); + UNLOCK(flags); + mdelay(10); +#ifdef CONFIG_ADB_PMU + if ((param & 0xfff) == PMAC_SCC_IRDA) + pmu_enable_irled(0); +#endif /* CONFIG_ADB_PMU */ + } + return 0; +} + +static long ohare_floppy_enable(struct device_node *node, long param, + long value) +{ + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_FLOPPY_ENABLE, value); +} + +static long ohare_mesh_enable(struct device_node *node, long param, long value) +{ + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_MESH_ENABLE, value); +} + +static long ohare_ide_enable(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + /* For some reason, setting the bit in set_initial_features() + * doesn't stick. I'm still investigating... --BenH. + */ + if (value) + simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IOBUS_ENABLE, 1); + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_BAY_IDE_ENABLE, value); + default: + return -ENODEV; + } +} + +static long ohare_ide_reset(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE1_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long ohare_sleep_state(struct device_node *node, long param, long value) +{ + struct macio_chip* macio = &macio_chips[0]; + + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + if (value == 1) { + MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE); + } else if (value == 0) { + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } + + return 0; +} + +static long heathrow_modem_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + macio = macio_find(node, macio_unknown); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1; + if (!value) { + LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + mdelay(250); + } + if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && + pmac_mb.model_id != PMAC_TYPE_YIKES) { + LOCK(flags); + if (value) + MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + else + MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(250); + } + if (value) { + LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long heathrow_floppy_enable(struct device_node *node, long param, + long value) +{ + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, + HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE, + value); +} + +static long heathrow_mesh_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, macio_unknown); + if (!macio) + return -ENODEV; + LOCK(flags); + /* Set clear mesh cell enable */ + if (value) + MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE); + else + MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE); + (void)MACIO_IN32(HEATHROW_FCR); + udelay(10); + /* Set/Clear termination power */ + if (value) + MACIO_BIC(HEATHROW_MBCR, 0x04000000); + else + MACIO_BIS(HEATHROW_MBCR, 0x04000000); + (void)MACIO_IN32(HEATHROW_MBCR); + udelay(10); + UNLOCK(flags); + + return 0; +} + +static long heathrow_ide_enable(struct device_node *node, long param, + long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value); + default: + return -ENODEV; + } +} + +static long heathrow_ide_reset(struct device_node *node, long param, + long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE1_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long heathrow_bmac_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (value) { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); + MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(10); + LOCK(flags); + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(10); + } else { + LOCK(flags); + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); + UNLOCK(flags); + } + return 0; +} + +static long heathrow_sound_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + /* B&W G3 and Yikes don't support that properly (the + * sound appear to never come back after beeing shut down). + */ + if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE || + pmac_mb.model_id == PMAC_TYPE_YIKES) + return 0; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (value) { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + } else { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + UNLOCK(flags); + } + return 0; +} + +static u32 save_fcr[6]; +static u32 save_mbcr; +static u32 save_gpio_levels[2]; +static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; +static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; +static u32 save_unin_clock_ctl; +static struct dbdma_regs save_dbdma[13]; +static struct dbdma_regs save_alt_dbdma[13]; + +static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save) +{ + int i; + + /* Save state & config of DBDMA channels */ + for (i = 0; i < 13; i++) { + volatile struct dbdma_regs __iomem * chan = (void __iomem *) + (macio->base + ((0x8000+i*0x100)>>2)); + save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi); + save[i].cmdptr = in_le32(&chan->cmdptr); + save[i].intr_sel = in_le32(&chan->intr_sel); + save[i].br_sel = in_le32(&chan->br_sel); + save[i].wait_sel = in_le32(&chan->wait_sel); + } +} + +static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save) +{ + int i; + + /* Save state & config of DBDMA channels */ + for (i = 0; i < 13; i++) { + volatile struct dbdma_regs __iomem * chan = (void __iomem *) + (macio->base + ((0x8000+i*0x100)>>2)); + out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16); + while (in_le32(&chan->status) & ACTIVE) + mb(); + out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi); + out_le32(&chan->cmdptr, save[i].cmdptr); + out_le32(&chan->intr_sel, save[i].intr_sel); + out_le32(&chan->br_sel, save[i].br_sel); + out_le32(&chan->wait_sel, save[i].wait_sel); + } +} + +static void heathrow_sleep(struct macio_chip *macio, int secondary) +{ + if (secondary) { + dbdma_save(macio, save_alt_dbdma); + save_fcr[2] = MACIO_IN32(0x38); + save_fcr[3] = MACIO_IN32(0x3c); + } else { + dbdma_save(macio, save_dbdma); + save_fcr[0] = MACIO_IN32(0x38); + save_fcr[1] = MACIO_IN32(0x3c); + save_mbcr = MACIO_IN32(0x34); + /* Make sure sound is shut down */ + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + /* This seems to be necessary as well or the fan + * keeps coming up and battery drains fast */ + MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N); + /* Make sure eth is down even if module or sleep + * won't work properly */ + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET); + } + /* Make sure modem is shut down */ + MACIO_OUT8(HRW_GPIO_MODEM_RESET, + MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1); + MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE); + + /* Let things settle */ + (void)MACIO_IN32(HEATHROW_FCR); +} + +static void heathrow_wakeup(struct macio_chip *macio, int secondary) +{ + if (secondary) { + MACIO_OUT32(0x38, save_fcr[2]); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x3c, save_fcr[3]); + (void)MACIO_IN32(0x38); + mdelay(10); + dbdma_restore(macio, save_alt_dbdma); + } else { + MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x3c, save_fcr[1]); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x34, save_mbcr); + (void)MACIO_IN32(0x38); + mdelay(10); + dbdma_restore(macio, save_dbdma); + } +} + +static long heathrow_sleep_state(struct device_node *node, long param, + long value) +{ + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + if (value == 1) { + if (macio_chips[1].type == macio_gatwick) + heathrow_sleep(&macio_chips[0], 1); + heathrow_sleep(&macio_chips[0], 0); + } else if (value == 0) { + heathrow_wakeup(&macio_chips[0], 0); + if (macio_chips[1].type == macio_gatwick) + heathrow_wakeup(&macio_chips[0], 1); + } + return 0; +} + +static long core99_scc_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + unsigned long chan_mask; + u32 fcr; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (!strcmp(node->name, "ch-a")) + chan_mask = MACIO_FLAG_SCCA_ON; + else if (!strcmp(node->name, "ch-b")) + chan_mask = MACIO_FLAG_SCCB_ON; + else + return -ENODEV; + + if (value) { + int need_reset_scc = 0; + int need_reset_irda = 0; + + LOCK(flags); + fcr = MACIO_IN32(KEYLARGO_FCR0); + /* Check if scc cell need enabling */ + if (!(fcr & KL0_SCC_CELL_ENABLE)) { + fcr |= KL0_SCC_CELL_ENABLE; + need_reset_scc = 1; + } + if (chan_mask & MACIO_FLAG_SCCA_ON) { + fcr |= KL0_SCCA_ENABLE; + /* Don't enable line drivers for I2S modem */ + if ((param & 0xfff) == PMAC_SCC_I2S1) + fcr &= ~KL0_SCC_A_INTF_ENABLE; + else + fcr |= KL0_SCC_A_INTF_ENABLE; + } + if (chan_mask & MACIO_FLAG_SCCB_ON) { + fcr |= KL0_SCCB_ENABLE; + /* Perform irda specific inits */ + if ((param & 0xfff) == PMAC_SCC_IRDA) { + fcr &= ~KL0_SCC_B_INTF_ENABLE; + fcr |= KL0_IRDA_ENABLE; + fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE; + fcr |= KL0_IRDA_SOURCE1_SEL; + fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); + fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); + need_reset_irda = 1; + } else + fcr |= KL0_SCC_B_INTF_ENABLE; + } + MACIO_OUT32(KEYLARGO_FCR0, fcr); + macio->flags |= chan_mask; + if (need_reset_scc) { + MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(15); + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET); + } + if (need_reset_irda) { + MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(15); + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET); + } + UNLOCK(flags); + if (param & PMAC_SCC_FLAG_XMON) + macio->flags |= MACIO_FLAG_SCC_LOCKED; + } else { + if (macio->flags & MACIO_FLAG_SCC_LOCKED) + return -EPERM; + LOCK(flags); + fcr = MACIO_IN32(KEYLARGO_FCR0); + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr &= ~KL0_SCCA_ENABLE; + if (chan_mask & MACIO_FLAG_SCCB_ON) { + fcr &= ~KL0_SCCB_ENABLE; + /* Perform irda specific clears */ + if ((param & 0xfff) == PMAC_SCC_IRDA) { + fcr &= ~KL0_IRDA_ENABLE; + fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE); + fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); + fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); + } + } + MACIO_OUT32(KEYLARGO_FCR0, fcr); + if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) { + fcr &= ~KL0_SCC_CELL_ENABLE; + MACIO_OUT32(KEYLARGO_FCR0, fcr); + } + macio->flags &= ~(chan_mask); + UNLOCK(flags); + mdelay(10); + } + return 0; +} + +static long +core99_modem_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + /* Hack for internal USB modem */ + if (node == NULL) { + if (macio_chips[0].type != macio_keylargo) + return -ENODEV; + node = macio_chips[0].of_node; + } + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); + gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; + gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; + + if (!value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + mdelay(250); + } + LOCK(flags); + if (value) { + MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR2); + mdelay(250); + } else { + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + UNLOCK(flags); + } + if (value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long +pangea_modem_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + /* Hack for internal USB modem */ + if (node == NULL) { + if (macio_chips[0].type != macio_pangea && + macio_chips[0].type != macio_intrepid) + return -ENODEV; + node = macio_chips[0].of_node; + } + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); + gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; + gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; + + if (!value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + mdelay(250); + } + LOCK(flags); + if (value) { + MACIO_OUT8(KL_GPIO_MODEM_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR2); + mdelay(250); + } else { + MACIO_OUT8(KL_GPIO_MODEM_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); + UNLOCK(flags); + } + if (value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long +core99_ata100_enable(struct device_node *node, long value) +{ + unsigned long flags; + struct pci_dev *pdev = NULL; + u8 pbus, pid; + + if (uninorth_rev < 0x24) + return -ENODEV; + + LOCK(flags); + if (value) + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); + else + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); + (void)UN_IN(UNI_N_CLOCK_CNTL); + UNLOCK(flags); + udelay(20); + + if (value) { + if (pci_device_from_OF_node(node, &pbus, &pid) == 0) + pdev = pci_find_slot(pbus, pid); + if (pdev == NULL) + return 0; + pci_enable_device(pdev); + pci_set_master(pdev); + } + return 0; +} + +static long +core99_ide_enable(struct device_node *node, long param, long value) +{ + /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2 + * based ata-100 + */ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value); + case 2: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_UIDE_ENABLE, value); + case 3: + return core99_ata100_enable(node, value); + default: + return -ENODEV; + } +} + +static long +core99_ide_reset(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value); + case 2: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long +core99_gmac_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + LOCK(flags); + if (value) + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); + else + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); + (void)UN_IN(UNI_N_CLOCK_CNTL); + UNLOCK(flags); + udelay(20); + + return 0; +} + +static long +core99_gmac_phy_reset(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + LOCK(flags); + MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET); + UNLOCK(flags); + mdelay(10); + LOCK(flags); + MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */ + KEYLARGO_GPIO_OUTOUT_DATA); + UNLOCK(flags); + mdelay(10); + + return 0; +} + +static long +core99_sound_chip_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + + /* Do a better probe code, screamer G4 desktops & + * iMacs can do that too, add a recalibrate in + * the driver as well + */ + if (pmac_mb.model_id == PMAC_TYPE_PISMO || + pmac_mb.model_id == PMAC_TYPE_TITANIUM) { + LOCK(flags); + if (value) + MACIO_OUT8(KL_GPIO_SOUND_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE | + KEYLARGO_GPIO_OUTOUT_DATA); + else + MACIO_OUT8(KL_GPIO_SOUND_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(KL_GPIO_SOUND_POWER); + UNLOCK(flags); + } + return 0; +} + +static long +core99_airport_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + int state; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + + /* Hint: we allow passing of macio itself for the sake of the + * sleep code + */ + if (node != macio->of_node && + (!node->parent || node->parent != macio->of_node)) + return -ENODEV; + state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0; + if (value == state) + return 0; + if (value) { + /* This code is a reproduction of OF enable-cardslot + * and init-wireless methods, slightly hacked until + * I got it working. + */ + LOCK(flags); + MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); + UNLOCK(flags); + mdelay(10); + LOCK(flags); + MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); + UNLOCK(flags); + + mdelay(10); + + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe); + UNLOCK(flags); + udelay(10); + MACIO_OUT32(0x1c000, 0); + mdelay(1); + MACIO_OUT8(0x1a3e0, 0x41); + (void)MACIO_IN8(0x1a3e0); + udelay(10); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + UNLOCK(flags); + mdelay(100); + + macio->flags |= MACIO_FLAG_AIRPORT_ON; + } else { + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + MACIO_OUT8(KL_GPIO_AIRPORT_0, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_1, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_2, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_3, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_4, 0); + (void)MACIO_IN8(KL_GPIO_AIRPORT_4); + UNLOCK(flags); + + macio->flags &= ~MACIO_FLAG_AIRPORT_ON; + } + return 0; +} + +#ifdef CONFIG_SMP +static long +core99_reset_cpu(struct device_node *node, long param, long value) +{ + unsigned int reset_io = 0; + unsigned long flags; + struct macio_chip *macio; + struct device_node *np; + const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0, + KL_GPIO_RESET_CPU1, + KL_GPIO_RESET_CPU2, + KL_GPIO_RESET_CPU3 }; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo) + return -ENODEV; + + np = find_path_device("/cpus"); + if (np == NULL) + return -ENODEV; + for (np = np->child; np != NULL; np = np->sibling) { + u32 *num = (u32 *)get_property(np, "reg", NULL); + u32 *rst = (u32 *)get_property(np, "soft-reset", NULL); + if (num == NULL || rst == NULL) + continue; + if (param == *num) { + reset_io = *rst; + break; + } + } + if (np == NULL || reset_io == 0) + reset_io = dflt_reset_lines[param]; + + LOCK(flags); + MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(reset_io); + udelay(1); + MACIO_OUT8(reset_io, 0); + (void)MACIO_IN8(reset_io); + UNLOCK(flags); + + return 0; +} +#endif /* CONFIG_SMP */ + +static long +core99_usb_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio; + unsigned long flags; + char *prop; + int number; + u32 reg; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + prop = (char *)get_property(node, "AAPL,clock-id", NULL); + if (!prop) + return -ENODEV; + if (strncmp(prop, "usb0u048", 8) == 0) + number = 0; + else if (strncmp(prop, "usb1u148", 8) == 0) + number = 2; + else if (strncmp(prop, "usb2u248", 8) == 0) + number = 4; + else + return -ENODEV; + + /* Sorry for the brute-force locking, but this is only used during + * sleep and the timing seem to be critical + */ + LOCK(flags); + if (value) { + /* Turn ON */ + if (number == 0) { + MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); + } else if (number == 2) { + MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); + } else if (number == 4) { + MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR1); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE); + } + if (number < 4) { + reg = MACIO_IN32(KEYLARGO_FCR4); + reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | + KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number)); + reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | + KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1)); + MACIO_OUT32(KEYLARGO_FCR4, reg); + (void)MACIO_IN32(KEYLARGO_FCR4); + udelay(10); + } else { + reg = MACIO_IN32(KEYLARGO_FCR3); + reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | + KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0)); + reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | + KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1)); + MACIO_OUT32(KEYLARGO_FCR3, reg); + (void)MACIO_IN32(KEYLARGO_FCR3); + udelay(10); + } + if (macio->type == macio_intrepid) { + /* wait for clock stopped bits to clear */ + u32 test0 = 0, test1 = 0; + u32 status0, status1; + int timeout = 1000; + + UNLOCK(flags); + switch (number) { + case 0: + test0 = UNI_N_CLOCK_STOPPED_USB0; + test1 = UNI_N_CLOCK_STOPPED_USB0PCI; + break; + case 2: + test0 = UNI_N_CLOCK_STOPPED_USB1; + test1 = UNI_N_CLOCK_STOPPED_USB1PCI; + break; + case 4: + test0 = UNI_N_CLOCK_STOPPED_USB2; + test1 = UNI_N_CLOCK_STOPPED_USB2PCI; + break; + } + do { + if (--timeout <= 0) { + printk(KERN_ERR "core99_usb_enable: " + "Timeout waiting for clocks\n"); + break; + } + mdelay(1); + status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0); + status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1); + } while ((status0 & test0) | (status1 & test1)); + LOCK(flags); + } + } else { + /* Turn OFF */ + if (number < 4) { + reg = MACIO_IN32(KEYLARGO_FCR4); + reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | + KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number); + reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | + KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1); + MACIO_OUT32(KEYLARGO_FCR4, reg); + (void)MACIO_IN32(KEYLARGO_FCR4); + udelay(1); + } else { + reg = MACIO_IN32(KEYLARGO_FCR3); + reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | + KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0); + reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | + KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1); + MACIO_OUT32(KEYLARGO_FCR3, reg); + (void)MACIO_IN32(KEYLARGO_FCR3); + udelay(1); + } + if (number == 0) { + if (macio->type != macio_intrepid) + MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); + (void)MACIO_IN32(KEYLARGO_FCR0); + udelay(1); + MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + } else if (number == 2) { + if (macio->type != macio_intrepid) + MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); + (void)MACIO_IN32(KEYLARGO_FCR0); + udelay(1); + MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + } else if (number == 4) { + udelay(1); + MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR1); + } + udelay(1); + } + UNLOCK(flags); + + return 0; +} + +static long +core99_firewire_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) + return -ENODEV; + + LOCK(flags); + if (value) { + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); + (void)UN_IN(UNI_N_CLOCK_CNTL); + } else { + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); + (void)UN_IN(UNI_N_CLOCK_CNTL); + } + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long +core99_firewire_cable_power(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + /* Trick: we allow NULL node */ + if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0) + return -ENODEV; + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0); + MACIO_IN8(KL_GPIO_FW_CABLE_POWER); + udelay(10); + } else { + MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4); + MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10); + } + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long +intrepid_aack_delay_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + if (uninorth_rev < 0xd2) + return -ENODEV; + + LOCK(flags); + if (param) + UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); + else + UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); + UNLOCK(flags); + + return 0; +} + + +#endif /* CONFIG_POWER4 */ + +static long +core99_read_gpio(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + + return MACIO_IN8(param); +} + + +static long +core99_write_gpio(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + + MACIO_OUT8(param, (u8)(value & 0xff)); + return 0; +} + +#ifdef CONFIG_POWER4 +static long g5_gmac_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (node == NULL) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); + mb(); + k2_skiplist[0] = NULL; + } else { + k2_skiplist[0] = node; + mb(); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); + } + + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long g5_fw_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (node == NULL) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); + mb(); + k2_skiplist[1] = NULL; + } else { + k2_skiplist[1] = node; + mb(); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); + } + + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long g5_mpic_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + if (node->parent == NULL || strcmp(node->parent->name, "u3")) + return 0; + + LOCK(flags); + UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE); + UNLOCK(flags); + + return 0; +} + +static long g5_eth_phy_reset(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + struct device_node *phy; + int need_reset; + + /* + * We must not reset the combo PHYs, only the BCM5221 found in + * the iMac G5. + */ + phy = of_get_next_child(node, NULL); + if (!phy) + return -ENODEV; + need_reset = device_is_compatible(phy, "B5221"); + of_node_put(phy); + if (!need_reset) + return 0; + + /* PHY reset is GPIO 29, not in device-tree unfortunately */ + MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, + KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); + /* Thankfully, this is now always called at a time when we can + * schedule by sungem. + */ + msleep(10); + MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0); + + return 0; +} + +static long g5_i2s_enable(struct device_node *node, long param, long value) +{ + /* Very crude implementation for now */ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (value == 0) + return 0; /* don't disable yet */ + + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE | + KL3_I2S0_CLK18_ENABLE); + udelay(10); + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE | + K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE); + udelay(10); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET); + UNLOCK(flags); + udelay(10); + + return 0; +} + + +#ifdef CONFIG_SMP +static long g5_reset_cpu(struct device_node *node, long param, long value) +{ + unsigned int reset_io = 0; + unsigned long flags; + struct macio_chip *macio; + struct device_node *np; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo2) + return -ENODEV; + + np = find_path_device("/cpus"); + if (np == NULL) + return -ENODEV; + for (np = np->child; np != NULL; np = np->sibling) { + u32 *num = (u32 *)get_property(np, "reg", NULL); + u32 *rst = (u32 *)get_property(np, "soft-reset", NULL); + if (num == NULL || rst == NULL) + continue; + if (param == *num) { + reset_io = *rst; + break; + } + } + if (np == NULL || reset_io == 0) + return -ENODEV; + + LOCK(flags); + MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(reset_io); + udelay(1); + MACIO_OUT8(reset_io, 0); + (void)MACIO_IN8(reset_io); + UNLOCK(flags); + + return 0; +} +#endif /* CONFIG_SMP */ + +/* + * This can be called from pmac_smp so isn't static + * + * This takes the second CPU off the bus on dual CPU machines + * running UP + */ +void g5_phy_disable_cpu1(void) +{ + UN_OUT(U3_API_PHY_CONFIG_1, 0); +} +#endif /* CONFIG_POWER4 */ + +#ifndef CONFIG_POWER4 + +static void +keylargo_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + if (sleep_mode) { + mdelay(1); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND); + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(1); + } + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE | + KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE | + KL0_IRDA_CLK19_ENABLE); + + MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK); + MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | + KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N | + KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N | + KL1_UIDE_ENABLE); + + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE); + + temp = MACIO_IN32(KEYLARGO_FCR3); + if (macio->rev >= 2) { + temp |= KL3_SHUTDOWN_PLL2X; + if (sleep_mode) + temp |= KL3_SHUTDOWN_PLL_TOTAL; + } + + temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | + KL3_SHUTDOWN_PLLKW35; + if (sleep_mode) + temp |= KL3_SHUTDOWN_PLLKW12; + temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE + | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); +} + +static void +pangea_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE | + KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | + KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_UIDE_ENABLE); + if (pmac_mb.board_flags & PMAC_MB_MOBILE) + MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); + + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + + temp = MACIO_IN32(KEYLARGO_FCR3); + temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | + KL3_SHUTDOWN_PLLKW35; + temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE + | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); +} + +static void +intrepid_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + /*KL1_USB2_CELL_ENABLE |*/ + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE); + if (pmac_mb.board_flags & PMAC_MB_MOBILE) + MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); + + temp = MACIO_IN32(KEYLARGO_FCR3); + temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | + KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(10); +} + + +void pmac_tweak_clock_spreading(int enable) +{ + struct macio_chip *macio = &macio_chips[0]; + + /* Hack for doing clock spreading on some machines PowerBooks and + * iBooks. This implements the "platform-do-clockspreading" OF + * property as decoded manually on various models. For safety, we also + * check the product ID in the device-tree in cases we'll whack the i2c + * chip to make reasonably sure we won't set wrong values in there + * + * Of course, ultimately, we have to implement a real parser for + * the platform-do-* stuff... + */ + + if (macio->type == macio_intrepid) { + if (enable) + UN_OUT(UNI_N_CLOCK_SPREADING, 2); + else + UN_OUT(UNI_N_CLOCK_SPREADING, 0); + mdelay(40); + } + + while (machine_is_compatible("PowerBook5,2") || + machine_is_compatible("PowerBook5,3") || + machine_is_compatible("PowerBook6,2") || + machine_is_compatible("PowerBook6,3")) { + struct device_node *ui2c = of_find_node_by_type(NULL, "i2c"); + struct device_node *dt = of_find_node_by_name(NULL, "device-tree"); + u8 buffer[9]; + u32 *productID; + int i, rc, changed = 0; + + if (dt == NULL) + break; + productID = (u32 *)get_property(dt, "pid#", NULL); + if (productID == NULL) + break; + while(ui2c) { + struct device_node *p = of_get_parent(ui2c); + if (p && !strcmp(p->name, "uni-n")) + break; + ui2c = of_find_node_by_type(ui2c, "i2c"); + } + if (ui2c == NULL) + break; + DBG("Trying to bump clock speed for PID: %08x...\n", *productID); + rc = pmac_low_i2c_open(ui2c, 1); + if (rc != 0) + break; + pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined); + rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9); + DBG("read result: %d,", rc); + if (rc != 0) { + pmac_low_i2c_close(ui2c); + break; + } + for (i=0; i<9; i++) + DBG(" %02x", buffer[i]); + DBG("\n"); + + switch(*productID) { + case 0x1182: /* AlBook 12" rev 2 */ + case 0x1183: /* iBook G4 12" */ + buffer[0] = (buffer[0] & 0x8f) | 0x70; + buffer[2] = (buffer[2] & 0x7f) | 0x00; + buffer[5] = (buffer[5] & 0x80) | 0x31; + buffer[6] = (buffer[6] & 0x40) | 0xb0; + buffer[7] = (buffer[7] & 0x00) | (enable ? 0xc0 : 0xba); + buffer[8] = (buffer[8] & 0x00) | 0x30; + changed = 1; + break; + case 0x3142: /* AlBook 15" (ATI M10) */ + case 0x3143: /* AlBook 17" (ATI M10) */ + buffer[0] = (buffer[0] & 0xaf) | 0x50; + buffer[2] = (buffer[2] & 0x7f) | 0x00; + buffer[5] = (buffer[5] & 0x80) | 0x31; + buffer[6] = (buffer[6] & 0x40) | 0xb0; + buffer[7] = (buffer[7] & 0x00) | (enable ? 0xd0 : 0xc0); + buffer[8] = (buffer[8] & 0x00) | 0x30; + changed = 1; + break; + default: + DBG("i2c-hwclock: Machine model not handled\n"); + break; + } + if (!changed) { + pmac_low_i2c_close(ui2c); + break; + } + pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub); + rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9); + DBG("write result: %d,", rc); + pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined); + rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9); + DBG("read result: %d,", rc); + if (rc != 0) { + pmac_low_i2c_close(ui2c); + break; + } + for (i=0; i<9; i++) + DBG(" %02x", buffer[i]); + pmac_low_i2c_close(ui2c); + break; + } +} + + +static int +core99_sleep(void) +{ + struct macio_chip *macio; + int i; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + /* We power off the wireless slot in case it was not done + * by the driver. We don't power it on automatically however + */ + if (macio->flags & MACIO_FLAG_AIRPORT_ON) + core99_airport_enable(macio->of_node, 0, 0); + + /* We power off the FW cable. Should be done by the driver... */ + if (macio->flags & MACIO_FLAG_FW_SUPPORTED) { + core99_firewire_enable(NULL, 0, 0); + core99_firewire_cable_power(NULL, 0, 0); + } + + /* We make sure int. modem is off (in case driver lost it) */ + if (macio->type == macio_keylargo) + core99_modem_enable(macio->of_node, 0, 0); + else + pangea_modem_enable(macio->of_node, 0, 0); + + /* We make sure the sound is off as well */ + core99_sound_chip_enable(macio->of_node, 0, 0); + + /* + * Save various bits of KeyLargo + */ + + /* Save the state of the various GPIOs */ + save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0); + save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1); + for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) + save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i); + for (i=0; i<KEYLARGO_GPIO_CNT; i++) + save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i); + + /* Save the FCRs */ + if (macio->type == macio_keylargo) + save_mbcr = MACIO_IN32(KEYLARGO_MBCR); + save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0); + save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1); + save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2); + save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3); + save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4); + if (macio->type == macio_pangea || macio->type == macio_intrepid) + save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5); + + /* Save state & config of DBDMA channels */ + dbdma_save(macio, save_dbdma); + + /* + * Turn off as much as we can + */ + if (macio->type == macio_pangea) + pangea_shutdown(macio, 1); + else if (macio->type == macio_intrepid) + intrepid_shutdown(macio, 1); + else if (macio->type == macio_keylargo) + keylargo_shutdown(macio, 1); + + /* + * Put the host bridge to sleep + */ + + save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL); + /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it + * enabled ! + */ + UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl & + ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/)); + udelay(100); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP); + mdelay(10); + + /* + * FIXME: A bit of black magic with OpenPIC (don't ask me why) + */ + if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { + MACIO_BIS(0x506e0, 0x00400000); + MACIO_BIS(0x506e0, 0x80000000); + } + return 0; +} + +static int +core99_wake_up(void) +{ + struct macio_chip *macio; + int i; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + /* + * Wakeup the host bridge + */ + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); + udelay(10); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); + udelay(10); + + /* + * Restore KeyLargo + */ + + if (macio->type == macio_keylargo) { + MACIO_OUT32(KEYLARGO_MBCR, save_mbcr); + (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10); + } + MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]); + (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10); + MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]); + (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10); + MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]); + (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10); + MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]); + (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10); + MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]); + (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10); + if (macio->type == macio_pangea || macio->type == macio_intrepid) { + MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]); + (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10); + } + + dbdma_restore(macio, save_dbdma); + + MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]); + MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]); + for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]); + for (i=0; i<KEYLARGO_GPIO_CNT; i++) + MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]); + + /* FIXME more black magic with OpenPIC ... */ + if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { + MACIO_BIC(0x506e0, 0x00400000); + MACIO_BIC(0x506e0, 0x80000000); + } + + UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl); + udelay(100); + + return 0; +} + +static long +core99_sleep_state(struct device_node *node, long param, long value) +{ + /* Param == 1 means to enter the "fake sleep" mode that is + * used for CPU speed switch + */ + if (param == 1) { + if (value == 1) { + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2); + } else { + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); + udelay(10); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); + udelay(10); + } + return 0; + } + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + + if (value == 1) + return core99_sleep(); + else if (value == 0) + return core99_wake_up(); + return 0; +} + +#endif /* CONFIG_POWER4 */ + +static long +generic_dev_can_wake(struct device_node *node, long param, long value) +{ + /* Todo: eventually check we are really dealing with on-board + * video device ... + */ + + if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP) + pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP; + return 0; +} + +static long generic_get_mb_info(struct device_node *node, long param, long value) +{ + switch(param) { + case PMAC_MB_INFO_MODEL: + return pmac_mb.model_id; + case PMAC_MB_INFO_FLAGS: + return pmac_mb.board_flags; + case PMAC_MB_INFO_NAME: + /* hack hack hack... but should work */ + *((const char **)value) = pmac_mb.model_name; + return 0; + } + return -EINVAL; +} + + +/* + * Table definitions + */ + +/* Used on any machine + */ +static struct feature_table_entry any_features[] = { + { PMAC_FTR_GET_MB_INFO, generic_get_mb_info }, + { PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake }, + { 0, NULL } +}; + +#ifndef CONFIG_POWER4 + +/* OHare based motherboards. Currently, we only use these on the + * 2400,3400 and 3500 series powerbooks. Some older desktops seem + * to have issues with turning on/off those asic cells + */ +static struct feature_table_entry ohare_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, ohare_ide_enable}, + { PMAC_FTR_IDE_RESET, ohare_ide_reset}, + { PMAC_FTR_SLEEP_STATE, ohare_sleep_state }, + { 0, NULL } +}; + +/* Heathrow desktop machines (Beige G3). + * Separated as some features couldn't be properly tested + * and the serial port control bits appear to confuse it. + */ +static struct feature_table_entry heathrow_desktop_features[] = { + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { 0, NULL } +}; + +/* Heathrow based laptop, that is the Wallstreet and mainstreet + * powerbooks. + */ +static struct feature_table_entry heathrow_laptop_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, + { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, + { 0, NULL } +}; + +/* Paddington based machines + * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4. + */ +static struct feature_table_entry paddington_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, + { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, + { 0, NULL } +}; + +/* Core99 & MacRISC 2 machines (all machines released since the + * iBook (included), that is all AGP machines, except pangea + * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo + * used on iBook2 & iMac "flow power". + */ +static struct feature_table_entry core99_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, core99_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, core99_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* RackMac + */ +static struct feature_table_entry rackmac_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, core99_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* Pangea features + */ +static struct feature_table_entry pangea_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* Intrepid features + */ +static struct feature_table_entry intrepid_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable }, + { 0, NULL } +}; + +#else /* CONFIG_POWER4 */ + +/* G5 features + */ +static struct feature_table_entry g5_features[] = { + { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable }, + { PMAC_FTR_1394_ENABLE, g5_fw_enable }, + { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable }, + { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, g5_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +#endif /* CONFIG_POWER4 */ + +static struct pmac_mb_def pmac_mb_defs[] = { +#ifndef CONFIG_POWER4 + /* + * Desktops + */ + + { "AAPL,8500", "PowerMac 8500/8600", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,9500", "PowerMac 9500/9600", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7200", "PowerMac 7200", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7300", "PowerMac 7200/7300", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7500", "PowerMac 7500", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,ShinerESB", "Apple Network Server", + PMAC_TYPE_ANS, NULL, + 0 + }, + { "AAPL,e407", "Alchemy", + PMAC_TYPE_ALCHEMY, NULL, + 0 + }, + { "AAPL,e411", "Gazelle", + PMAC_TYPE_GAZELLE, NULL, + 0 + }, + { "AAPL,Gossamer", "PowerMac G3 (Gossamer)", + PMAC_TYPE_GOSSAMER, heathrow_desktop_features, + 0 + }, + { "AAPL,PowerMac G3", "PowerMac G3 (Silk)", + PMAC_TYPE_SILK, heathrow_desktop_features, + 0 + }, + { "PowerMac1,1", "Blue&White G3", + PMAC_TYPE_YOSEMITE, paddington_features, + 0 + }, + { "PowerMac1,2", "PowerMac G4 PCI Graphics", + PMAC_TYPE_YIKES, paddington_features, + 0 + }, + { "PowerMac2,1", "iMac FireWire", + PMAC_TYPE_FW_IMAC, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac2,2", "iMac FireWire", + PMAC_TYPE_FW_IMAC, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,1", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,2", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,3", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,4", "PowerMac G4 Silver", + PMAC_TYPE_QUICKSILVER, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac3,5", "PowerMac G4 Silver", + PMAC_TYPE_QUICKSILVER, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac3,6", "PowerMac G4 Windtunnel", + PMAC_TYPE_WINDTUNNEL, core99_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac4,1", "iMac \"Flower Power\"", + PMAC_TYPE_PANGEA_IMAC, pangea_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac4,2", "Flat panel iMac", + PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features, + PMAC_MB_CAN_SLEEP + }, + { "PowerMac4,4", "eMac", + PMAC_TYPE_EMAC, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac5,1", "PowerMac G4 Cube", + PMAC_TYPE_CUBE, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac6,1", "Flat panel iMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac6,3", "Flat panel iMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac6,4", "eMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac10,1", "Mac mini", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER, + }, + { "iMac,1", "iMac (first generation)", + PMAC_TYPE_ORIG_IMAC, paddington_features, + 0 + }, + + /* + * Xserve's + */ + + { "RackMac1,1", "XServe", + PMAC_TYPE_RACKMAC, rackmac_features, + 0, + }, + { "RackMac1,2", "XServe rev. 2", + PMAC_TYPE_RACKMAC, rackmac_features, + 0, + }, + + /* + * Laptops + */ + + { "AAPL,3400/2400", "PowerBook 3400", + PMAC_TYPE_HOOPER, ohare_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "AAPL,3500", "PowerBook 3500", + PMAC_TYPE_KANGA, ohare_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "AAPL,PowerBook1998", "PowerBook Wallstreet", + PMAC_TYPE_WALLSTREET, heathrow_laptop_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "PowerBook1,1", "PowerBook 101 (Lombard)", + PMAC_TYPE_101_PBOOK, paddington_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "PowerBook2,1", "iBook (first generation)", + PMAC_TYPE_ORIG_IBOOK, core99_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook2,2", "iBook FireWire", + PMAC_TYPE_FW_IBOOK, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | + PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook3,1", "PowerBook Pismo", + PMAC_TYPE_PISMO, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | + PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook3,2", "PowerBook Titanium", + PMAC_TYPE_TITANIUM, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,3", "PowerBook Titanium II", + PMAC_TYPE_TITANIUM2, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,4", "PowerBook Titanium III", + PMAC_TYPE_TITANIUM3, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,5", "PowerBook Titanium IV", + PMAC_TYPE_TITANIUM4, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,1", "iBook 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,2", "iBook 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,3", "iBook 2 rev. 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook5,1", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,2", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,3", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,4", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,5", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,6", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,7", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,1", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,2", "PowerBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,3", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,4", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,5", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,8", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, +#else /* CONFIG_POWER4 */ + { "PowerMac7,2", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5, g5_features, + 0, + }, +#ifdef CONFIG_PPC64 + { "PowerMac7,3", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5, g5_features, + 0, + }, + { "PowerMac8,1", "iMac G5", + PMAC_TYPE_IMAC_G5, g5_features, + 0, + }, + { "PowerMac9,1", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "RackMac3,1", "XServe G5", + PMAC_TYPE_XSERVE_G5, g5_features, + 0, + }, +#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_POWER4 */ +}; + +/* + * The toplevel feature_call callback + */ +long pmac_do_feature_call(unsigned int selector, ...) +{ + struct device_node *node; + long param, value; + int i; + feature_call func = NULL; + va_list args; + + if (pmac_mb.features) + for (i=0; pmac_mb.features[i].function; i++) + if (pmac_mb.features[i].selector == selector) { + func = pmac_mb.features[i].function; + break; + } + if (!func) + for (i=0; any_features[i].function; i++) + if (any_features[i].selector == selector) { + func = any_features[i].function; + break; + } + if (!func) + return -ENODEV; + + va_start(args, selector); + node = (struct device_node*)va_arg(args, void*); + param = va_arg(args, long); + value = va_arg(args, long); + va_end(args); + + return func(node, param, value); +} + +static int __init probe_motherboard(void) +{ + int i; + struct macio_chip *macio = &macio_chips[0]; + const char *model = NULL; + struct device_node *dt; + + /* Lookup known motherboard type in device-tree. First try an + * exact match on the "model" property, then try a "compatible" + * match is none is found. + */ + dt = find_devices("device-tree"); + if (dt != NULL) + model = (const char *) get_property(dt, "model", NULL); + for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { + if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { + pmac_mb = pmac_mb_defs[i]; + goto found; + } + } + for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { + if (machine_is_compatible(pmac_mb_defs[i].model_string)) { + pmac_mb = pmac_mb_defs[i]; + goto found; + } + } + + /* Fallback to selection depending on mac-io chip type */ + switch(macio->type) { +#ifndef CONFIG_POWER4 + case macio_grand_central: + pmac_mb.model_id = PMAC_TYPE_PSURGE; + pmac_mb.model_name = "Unknown PowerSurge"; + break; + case macio_ohare: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE; + pmac_mb.model_name = "Unknown OHare-based"; + break; + case macio_heathrow: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW; + pmac_mb.model_name = "Unknown Heathrow-based"; + pmac_mb.features = heathrow_desktop_features; + break; + case macio_paddington: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON; + pmac_mb.model_name = "Unknown Paddington-based"; + pmac_mb.features = paddington_features; + break; + case macio_keylargo: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99; + pmac_mb.model_name = "Unknown Keylargo-based"; + pmac_mb.features = core99_features; + break; + case macio_pangea: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA; + pmac_mb.model_name = "Unknown Pangea-based"; + pmac_mb.features = pangea_features; + break; + case macio_intrepid: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID; + pmac_mb.model_name = "Unknown Intrepid-based"; + pmac_mb.features = intrepid_features; + break; +#else /* CONFIG_POWER4 */ + case macio_keylargo2: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; + pmac_mb.model_name = "Unknown K2-based"; + pmac_mb.features = g5_features; + break; +#endif /* CONFIG_POWER4 */ + default: + return -ENODEV; + } +found: +#ifndef CONFIG_POWER4 + /* Fixup Hooper vs. Comet */ + if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { + u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); + if (!mach_id_ptr) + return -ENODEV; + /* Here, I used to disable the media-bay on comet. It + * appears this is wrong, the floppy connector is actually + * a kind of media-bay and works with the current driver. + */ + if (__raw_readl(mach_id_ptr) & 0x20000000UL) + pmac_mb.model_id = PMAC_TYPE_COMET; + iounmap(mach_id_ptr); + } +#endif /* CONFIG_POWER4 */ + +#ifdef CONFIG_6xx + /* Set default value of powersave_nap on machines that support it. + * It appears that uninorth rev 3 has a problem with it, we don't + * enable it on those. In theory, the flush-on-lock property is + * supposed to be set when not supported, but I'm not very confident + * that all Apple OF revs did it properly, I do it the paranoid way. + */ + while (uninorth_base && uninorth_rev > 3) { + struct device_node *np = find_path_device("/cpus"); + if (!np || !np->child) { + printk(KERN_WARNING "Can't find CPU(s) in device tree !\n"); + break; + } + np = np->child; + /* Nap mode not supported on SMP */ + if (np->sibling) + break; + /* Nap mode not supported if flush-on-lock property is present */ + if (get_property(np, "flush-on-lock", NULL)) + break; + powersave_nap = 1; + printk(KERN_INFO "Processor NAP mode on idle enabled.\n"); + break; + } + + /* On CPUs that support it (750FX), lowspeed by default during + * NAP mode + */ + powersave_lowspeed = 1; +#endif /* CONFIG_6xx */ +#ifdef CONFIG_POWER4 + powersave_nap = 1; +#endif + /* Check for "mobile" machine */ + if (model && (strncmp(model, "PowerBook", 9) == 0 + || strncmp(model, "iBook", 5) == 0)) + pmac_mb.board_flags |= PMAC_MB_MOBILE; + + + printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); + return 0; +} + +/* Initialize the Core99 UniNorth host bridge and memory controller + */ +static void __init probe_uninorth(void) +{ + unsigned long actrl; + + /* Locate core99 Uni-N */ + uninorth_node = of_find_node_by_name(NULL, "uni-n"); + /* Locate G5 u3 */ + if (uninorth_node == NULL) { + uninorth_node = of_find_node_by_name(NULL, "u3"); + uninorth_u3 = 1; + } + if (uninorth_node && uninorth_node->n_addrs > 0) { + unsigned long address = uninorth_node->addrs[0].address; + uninorth_base = ioremap(address, 0x40000); + uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); + if (uninorth_u3) + u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + } else + uninorth_node = NULL; + + if (!uninorth_node) + return; + + printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n", + uninorth_u3 ? "U3" : "UniNorth", uninorth_rev); + printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); + + /* Set the arbitrer QAck delay according to what Apple does + */ + if (uninorth_rev < 0x11) { + actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; + actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : + UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; + UN_OUT(UNI_N_ARB_CTRL, actrl); + } + + /* Some more magic as done by them in recent MacOS X on UniNorth + * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI + * memory timeout + */ + if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0) + UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); +} + +static void __init probe_one_macio(const char *name, const char *compat, int type) +{ + struct device_node* node; + int i; + volatile u32 __iomem * base; + u32* revp; + + node = find_devices(name); + if (!node || !node->n_addrs) + return; + if (compat) + do { + if (device_is_compatible(node, compat)) + break; + node = node->next; + } while (node); + if (!node) + return; + for(i=0; i<MAX_MACIO_CHIPS; i++) { + if (!macio_chips[i].of_node) + break; + if (macio_chips[i].of_node == node) + return; + } + if (i >= MAX_MACIO_CHIPS) { + printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); + printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name); + return; + } + base = ioremap(node->addrs[0].address, node->addrs[0].size); + if (!base) { + printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n"); + return; + } + if (type == macio_keylargo) { + u32 *did = (u32 *)get_property(node, "device-id", NULL); + if (*did == 0x00000025) + type = macio_pangea; + if (*did == 0x0000003e) + type = macio_intrepid; + } + macio_chips[i].of_node = node; + macio_chips[i].type = type; + macio_chips[i].base = base; + macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON; + macio_chips[i].name = macio_names[type]; + revp = (u32 *)get_property(node, "revision-id", NULL); + if (revp) + macio_chips[i].rev = *revp; + printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", + macio_names[type], macio_chips[i].rev, macio_chips[i].base); +} + +static int __init +probe_macios(void) +{ + /* Warning, ordering is important */ + probe_one_macio("gc", NULL, macio_grand_central); + probe_one_macio("ohare", NULL, macio_ohare); + probe_one_macio("pci106b,7", NULL, macio_ohareII); + probe_one_macio("mac-io", "keylargo", macio_keylargo); + probe_one_macio("mac-io", "paddington", macio_paddington); + probe_one_macio("mac-io", "gatwick", macio_gatwick); + probe_one_macio("mac-io", "heathrow", macio_heathrow); + probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2); + + /* Make sure the "main" macio chip appear first */ + if (macio_chips[0].type == macio_gatwick + && macio_chips[1].type == macio_heathrow) { + struct macio_chip temp = macio_chips[0]; + macio_chips[0] = macio_chips[1]; + macio_chips[1] = temp; + } + if (macio_chips[0].type == macio_ohareII + && macio_chips[1].type == macio_ohare) { + struct macio_chip temp = macio_chips[0]; + macio_chips[0] = macio_chips[1]; + macio_chips[1] = temp; + } + macio_chips[0].lbus.index = 0; + macio_chips[1].lbus.index = 1; + + return (macio_chips[0].of_node == NULL) ? -ENODEV : 0; +} + +static void __init +initial_serial_shutdown(struct device_node *np) +{ + int len; + struct slot_names_prop { + int count; + char name[1]; + } *slots; + char *conn; + int port_type = PMAC_SCC_ASYNC; + int modem = 0; + + slots = (struct slot_names_prop *)get_property(np, "slot-names", &len); + conn = get_property(np, "AAPL,connector", &len); + if (conn && (strcmp(conn, "infrared") == 0)) + port_type = PMAC_SCC_IRDA; + else if (device_is_compatible(np, "cobalt")) + modem = 1; + else if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + port_type = PMAC_SCC_IRDA; + else if (strcmp(slots->name, "Modem") == 0) + modem = 1; + } + if (modem) + pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0); + pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0); +} + +static void __init +set_initial_features(void) +{ + struct device_node *np; + + /* That hack appears to be necessary for some StarMax motherboards + * but I'm not too sure it was audited for side-effects on other + * ohare based machines... + * Since I still have difficulties figuring the right way to + * differenciate them all and since that hack was there for a long + * time, I'll keep it around + */ + if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) { + struct macio_chip *macio = &macio_chips[0]; + MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); + } else if (macio_chips[0].type == macio_ohare) { + struct macio_chip *macio = &macio_chips[0]; + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } else if (macio_chips[1].type == macio_ohare) { + struct macio_chip *macio = &macio_chips[1]; + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } + +#ifdef CONFIG_POWER4 + if (macio_chips[0].type == macio_keylargo2) { +#ifndef CONFIG_SMP + /* On SMP machines running UP, we have the second CPU eating + * bus cycles. We need to take it off the bus. This is done + * from pmac_smp for SMP kernels running on one CPU + */ + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) + np = of_find_node_by_type(np, "cpu"); + if (np != NULL) { + g5_phy_disable_cpu1(); + of_node_put(np); + } +#endif /* CONFIG_SMP */ + /* Enable GMAC for now for PCI probing. It will be disabled + * later on after PCI probe + */ + np = of_find_node_by_name(NULL, "ethernet"); + while(np) { + if (device_is_compatible(np, "K2-GMAC")) + g5_gmac_enable(np, 0, 1); + np = of_find_node_by_name(np, "ethernet"); + } + + /* Enable FW before PCI probe. Will be disabled later on + * Note: We should have a batter way to check that we are + * dealing with uninorth internal cell and not a PCI cell + * on the external PCI. The code below works though. + */ + np = of_find_node_by_name(NULL, "firewire"); + while(np) { + if (device_is_compatible(np, "pci106b,5811")) { + macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; + g5_fw_enable(np, 0, 1); + } + np = of_find_node_by_name(np, "firewire"); + } + } +#else /* CONFIG_POWER4 */ + + if (macio_chips[0].type == macio_keylargo || + macio_chips[0].type == macio_pangea || + macio_chips[0].type == macio_intrepid) { + /* Enable GMAC for now for PCI probing. It will be disabled + * later on after PCI probe + */ + np = of_find_node_by_name(NULL, "ethernet"); + while(np) { + if (np->parent + && device_is_compatible(np->parent, "uni-north") + && device_is_compatible(np, "gmac")) + core99_gmac_enable(np, 0, 1); + np = of_find_node_by_name(np, "ethernet"); + } + + /* Enable FW before PCI probe. Will be disabled later on + * Note: We should have a batter way to check that we are + * dealing with uninorth internal cell and not a PCI cell + * on the external PCI. The code below works though. + */ + np = of_find_node_by_name(NULL, "firewire"); + while(np) { + if (np->parent + && device_is_compatible(np->parent, "uni-north") + && (device_is_compatible(np, "pci106b,18") || + device_is_compatible(np, "pci106b,30") || + device_is_compatible(np, "pci11c1,5811"))) { + macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; + core99_firewire_enable(np, 0, 1); + } + np = of_find_node_by_name(np, "firewire"); + } + + /* Enable ATA-100 before PCI probe. */ + np = of_find_node_by_name(NULL, "ata-6"); + while(np) { + if (np->parent + && device_is_compatible(np->parent, "uni-north") + && device_is_compatible(np, "kauai-ata")) { + core99_ata100_enable(np, 1); + } + np = of_find_node_by_name(np, "ata-6"); + } + + /* Switch airport off */ + np = find_devices("radio"); + while(np) { + if (np && np->parent == macio_chips[0].of_node) { + macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; + core99_airport_enable(np, 0, 0); + } + np = np->next; + } + } + + /* On all machines that support sound PM, switch sound off */ + if (macio_chips[0].of_node) + pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, + macio_chips[0].of_node, 0, 0); + + /* While on some desktop G3s, we turn it back on */ + if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow + && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER || + pmac_mb.model_id == PMAC_TYPE_SILK)) { + struct macio_chip *macio = &macio_chips[0]; + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); + } + + /* Some machine models need the clock chip to be properly setup for + * clock spreading now. This should be a platform function but we + * don't do these at the moment + */ + pmac_tweak_clock_spreading(1); + +#endif /* CONFIG_POWER4 */ + + /* On all machines, switch modem & serial ports off */ + np = find_devices("ch-a"); + while(np) { + initial_serial_shutdown(np); + np = np->next; + } + np = find_devices("ch-b"); + while(np) { + initial_serial_shutdown(np); + np = np->next; + } +} + +void __init +pmac_feature_init(void) +{ + /* Detect the UniNorth memory controller */ + probe_uninorth(); + + /* Probe mac-io controllers */ + if (probe_macios()) { + printk(KERN_WARNING "No mac-io chip found\n"); + return; + } + + /* Setup low-level i2c stuffs */ + pmac_init_low_i2c(); + + /* Probe machine type */ + if (probe_motherboard()) + printk(KERN_WARNING "Unknown PowerMac !\n"); + + /* Set some initial features (turn off some chips that will + * be later turned on) + */ + set_initial_features(); +} + +int __init pmac_feature_late_init(void) +{ +#if 0 + struct device_node *np; + + /* Request some resources late */ + if (uninorth_node) + request_OF_resource(uninorth_node, 0, NULL); + np = find_devices("hammerhead"); + if (np) + request_OF_resource(np, 0, NULL); + np = find_devices("interrupt-controller"); + if (np) + request_OF_resource(np, 0, NULL); +#endif + return 0; +} + +device_initcall(pmac_feature_late_init); + +#if 0 +static void dump_HT_speeds(char *name, u32 cfg, u32 frq) +{ + int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 }; + int bits[8] = { 8,16,0,32,2,4,0,0 }; + int freq = (frq >> 8) & 0xf; + + if (freqs[freq] == 0) + printk("%s: Unknown HT link frequency %x\n", name, freq); + else + printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", + name, freqs[freq], + bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]); +} + +void __init pmac_check_ht_link(void) +{ +#if 0 /* Disabled for now */ + u32 ufreq, freq, ucfg, cfg; + struct device_node *pcix_node; + u8 px_bus, px_devfn; + struct pci_controller *px_hose; + + (void)in_be32(u3_ht + U3_HT_LINK_COMMAND); + ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG); + ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ); + dump_HT_speeds("U3 HyperTransport", cfg, freq); + + pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); + if (pcix_node == NULL) { + printk("No PCI-X bridge found\n"); + return; + } + if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) { + printk("PCI-X bridge found but not matched to pci\n"); + return; + } + px_hose = pci_find_hose_for_OF_device(pcix_node); + if (px_hose == NULL) { + printk("PCI-X bridge found but not matched to host\n"); + return; + } + early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); + dump_HT_speeds("PCI-X HT Uplink", cfg, freq); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq); + dump_HT_speeds("PCI-X HT Downlink", cfg, freq); +#endif +} + +#endif /* CONFIG_POWER4 */ + +/* + * Early video resume hook + */ + +static void (*pmac_early_vresume_proc)(void *data); +static void *pmac_early_vresume_data; + +void pmac_set_early_video_resume(void (*proc)(void *data), void *data) +{ + if (_machine != _MACH_Pmac) + return; + preempt_disable(); + pmac_early_vresume_proc = proc; + pmac_early_vresume_data = data; + preempt_enable(); +} +EXPORT_SYMBOL(pmac_set_early_video_resume); + +void pmac_call_early_video_resume(void) +{ + if (pmac_early_vresume_proc) + pmac_early_vresume_proc(pmac_early_vresume_data); +} + +/* + * AGP related suspend/resume code + */ + +static struct pci_dev *pmac_agp_bridge; +static int (*pmac_agp_suspend)(struct pci_dev *bridge); +static int (*pmac_agp_resume)(struct pci_dev *bridge); + +void pmac_register_agp_pm(struct pci_dev *bridge, + int (*suspend)(struct pci_dev *bridge), + int (*resume)(struct pci_dev *bridge)) +{ + if (suspend || resume) { + pmac_agp_bridge = bridge; + pmac_agp_suspend = suspend; + pmac_agp_resume = resume; + return; + } + if (bridge != pmac_agp_bridge) + return; + pmac_agp_suspend = pmac_agp_resume = NULL; + return; +} +EXPORT_SYMBOL(pmac_register_agp_pm); + +void pmac_suspend_agp_for_card(struct pci_dev *dev) +{ + if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL) + return; + if (pmac_agp_bridge->bus != dev->bus) + return; + pmac_agp_suspend(pmac_agp_bridge); +} +EXPORT_SYMBOL(pmac_suspend_agp_for_card); + +void pmac_resume_agp_for_card(struct pci_dev *dev) +{ + if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL) + return; + if (pmac_agp_bridge->bus != dev->bus) + return; + pmac_agp_resume(pmac_agp_bridge); +} +EXPORT_SYMBOL(pmac_resume_agp_for_card); diff --git a/arch/powerpc/platforms/powermac/pmac_low_i2c.c b/arch/powerpc/platforms/powermac/pmac_low_i2c.c new file mode 100644 index 00000000000..f3f39e8e337 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_low_i2c.c @@ -0,0 +1,523 @@ +/* + * arch/ppc/platforms/pmac_low_i2c.c + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This file contains some low-level i2c access routines that + * need to be used by various bits of the PowerMac platform code + * at times where the real asynchronous & interrupt driven driver + * cannot be used. The API borrows some semantics from the darwin + * driver in order to ease the implementation of the platform + * properties parser + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <asm/keylargo.h> +#include <asm/uninorth.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pmac_low_i2c.h> + +#define MAX_LOW_I2C_HOST 4 + +#ifdef DEBUG +#define DBG(x...) do {\ + printk(KERN_DEBUG "KW:" x); \ + } while(0) +#else +#define DBG(x...) +#endif + +struct low_i2c_host; + +typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len); + +struct low_i2c_host +{ + struct device_node *np; /* OF device node */ + struct semaphore mutex; /* Access mutex for use by i2c-keywest */ + low_i2c_func_t func; /* Access function */ + unsigned int is_open : 1; /* Poor man's access control */ + int mode; /* Current mode */ + int channel; /* Current channel */ + int num_channels; /* Number of channels */ + void __iomem *base; /* For keywest-i2c, base address */ + int bsteps; /* And register stepping */ + int speed; /* And speed */ +}; + +static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST]; + +/* No locking is necessary on allocation, we are running way before + * anything can race with us + */ +static struct low_i2c_host *find_low_i2c_host(struct device_node *np) +{ + int i; + + for (i = 0; i < MAX_LOW_I2C_HOST; i++) + if (low_i2c_hosts[i].np == np) + return &low_i2c_hosts[i]; + return NULL; +} + +/* + * + * i2c-keywest implementation (UniNorth, U2, U3, Keylargo's) + * + */ + +/* + * Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h, + * should be moved somewhere in include/asm-ppc/ + */ +/* Register indices */ +typedef enum { + reg_mode = 0, + reg_control, + reg_status, + reg_isr, + reg_ier, + reg_addr, + reg_subaddr, + reg_data +} reg_t; + + +/* Mode register */ +#define KW_I2C_MODE_100KHZ 0x00 +#define KW_I2C_MODE_50KHZ 0x01 +#define KW_I2C_MODE_25KHZ 0x02 +#define KW_I2C_MODE_DUMB 0x00 +#define KW_I2C_MODE_STANDARD 0x04 +#define KW_I2C_MODE_STANDARDSUB 0x08 +#define KW_I2C_MODE_COMBINED 0x0C +#define KW_I2C_MODE_MODE_MASK 0x0C +#define KW_I2C_MODE_CHAN_MASK 0xF0 + +/* Control register */ +#define KW_I2C_CTL_AAK 0x01 +#define KW_I2C_CTL_XADDR 0x02 +#define KW_I2C_CTL_STOP 0x04 +#define KW_I2C_CTL_START 0x08 + +/* Status register */ +#define KW_I2C_STAT_BUSY 0x01 +#define KW_I2C_STAT_LAST_AAK 0x02 +#define KW_I2C_STAT_LAST_RW 0x04 +#define KW_I2C_STAT_SDA 0x08 +#define KW_I2C_STAT_SCL 0x10 + +/* IER & ISR registers */ +#define KW_I2C_IRQ_DATA 0x01 +#define KW_I2C_IRQ_ADDR 0x02 +#define KW_I2C_IRQ_STOP 0x04 +#define KW_I2C_IRQ_START 0x08 +#define KW_I2C_IRQ_MASK 0x0F + +/* State machine states */ +enum { + state_idle, + state_addr, + state_read, + state_write, + state_stop, + state_dead +}; + +#define WRONG_STATE(name) do {\ + printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \ + name, __kw_state_names[state], isr); \ + } while(0) + +static const char *__kw_state_names[] = { + "state_idle", + "state_addr", + "state_read", + "state_write", + "state_stop", + "state_dead" +}; + +static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg) +{ + return readb(host->base + (((unsigned int)reg) << host->bsteps)); +} + +static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val) +{ + writeb(val, host->base + (((unsigned)reg) << host->bsteps)); + (void)__kw_read_reg(host, reg_subaddr); +} + +#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val) +#define kw_read_reg(reg) __kw_read_reg(host, reg) + + +/* Don't schedule, the g5 fan controller is too + * timing sensitive + */ +static u8 kw_wait_interrupt(struct low_i2c_host* host) +{ + int i, j; + u8 isr; + + for (i = 0; i < 100000; i++) { + isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK; + if (isr != 0) + return isr; + + /* This code is used with the timebase frozen, we cannot rely + * on udelay ! For now, just use a bogus loop + */ + for (j = 1; j < 10000; j++) + mb(); + } + return isr; +} + +static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr) +{ + u8 ack; + + DBG("kw_handle_interrupt(%s, isr: %x)\n", __kw_state_names[state], isr); + + if (isr == 0) { + if (state != state_stop) { + DBG("KW: Timeout !\n"); + *rc = -EIO; + goto stop; + } + if (state == state_stop) { + ack = kw_read_reg(reg_status); + if (!(ack & KW_I2C_STAT_BUSY)) { + state = state_idle; + kw_write_reg(reg_ier, 0x00); + } + } + return state; + } + + if (isr & KW_I2C_IRQ_ADDR) { + ack = kw_read_reg(reg_status); + if (state != state_addr) { + kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); + WRONG_STATE("KW_I2C_IRQ_ADDR"); + *rc = -EIO; + goto stop; + } + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + *rc = -ENODEV; + DBG("KW: NAK on address\n"); + return state_stop; + } else { + if (rw) { + state = state_read; + if (*len > 1) + kw_write_reg(reg_control, KW_I2C_CTL_AAK); + } else { + state = state_write; + kw_write_reg(reg_data, **data); + (*data)++; (*len)--; + } + } + kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); + } + + if (isr & KW_I2C_IRQ_DATA) { + if (state == state_read) { + **data = kw_read_reg(reg_data); + (*data)++; (*len)--; + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + if ((*len) == 0) + state = state_stop; + else if ((*len) == 1) + kw_write_reg(reg_control, 0); + } else if (state == state_write) { + ack = kw_read_reg(reg_status); + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + DBG("KW: nack on data write\n"); + *rc = -EIO; + goto stop; + } else if (*len) { + kw_write_reg(reg_data, **data); + (*data)++; (*len)--; + } else { + kw_write_reg(reg_control, KW_I2C_CTL_STOP); + state = state_stop; + *rc = 0; + } + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + } else { + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + WRONG_STATE("KW_I2C_IRQ_DATA"); + if (state != state_stop) { + *rc = -EIO; + goto stop; + } + } + } + + if (isr & KW_I2C_IRQ_STOP) { + kw_write_reg(reg_isr, KW_I2C_IRQ_STOP); + if (state != state_stop) { + WRONG_STATE("KW_I2C_IRQ_STOP"); + *rc = -EIO; + } + return state_idle; + } + + if (isr & KW_I2C_IRQ_START) + kw_write_reg(reg_isr, KW_I2C_IRQ_START); + + return state; + + stop: + kw_write_reg(reg_control, KW_I2C_CTL_STOP); + return state_stop; +} + +static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len) +{ + u8 mode_reg = host->speed; + int state = state_addr; + int rc = 0; + + /* Setup mode & subaddress if any */ + switch(host->mode) { + case pmac_low_i2c_mode_dumb: + printk(KERN_ERR "low_i2c: Dumb mode not supported !\n"); + return -EINVAL; + case pmac_low_i2c_mode_std: + mode_reg |= KW_I2C_MODE_STANDARD; + break; + case pmac_low_i2c_mode_stdsub: + mode_reg |= KW_I2C_MODE_STANDARDSUB; + break; + case pmac_low_i2c_mode_combined: + mode_reg |= KW_I2C_MODE_COMBINED; + break; + } + + /* Setup channel & clear pending irqs */ + kw_write_reg(reg_isr, kw_read_reg(reg_isr)); + kw_write_reg(reg_mode, mode_reg | (host->channel << 4)); + kw_write_reg(reg_status, 0); + + /* Set up address and r/w bit */ + kw_write_reg(reg_addr, addr); + + /* Set up the sub address */ + if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB + || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED) + kw_write_reg(reg_subaddr, subaddr); + + /* Start sending address & disable interrupt*/ + kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/); + kw_write_reg(reg_control, KW_I2C_CTL_XADDR); + + /* State machine, to turn into an interrupt handler */ + while(state != state_idle) { + u8 isr = kw_wait_interrupt(host); + state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr); + } + + return rc; +} + +static void keywest_low_i2c_add(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(NULL); + u32 *psteps, *prate, steps, aoffset = 0; + struct device_node *parent; + + if (host == NULL) { + printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", + np->full_name); + return; + } + memset(host, 0, sizeof(*host)); + + init_MUTEX(&host->mutex); + host->np = of_node_get(np); + psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); + steps = psteps ? (*psteps) : 0x10; + for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++) + steps >>= 1; + parent = of_get_parent(np); + host->num_channels = 1; + if (parent && parent->name[0] == 'u') { + host->num_channels = 2; + aoffset = 3; + } + /* Select interface rate */ + host->speed = KW_I2C_MODE_100KHZ; + prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); + if (prate) switch(*prate) { + case 100: + host->speed = KW_I2C_MODE_100KHZ; + break; + case 50: + host->speed = KW_I2C_MODE_50KHZ; + break; + case 25: + host->speed = KW_I2C_MODE_25KHZ; + break; + } + + host->mode = pmac_low_i2c_mode_std; + host->base = ioremap(np->addrs[0].address + aoffset, + np->addrs[0].size); + host->func = keywest_low_i2c_func; +} + +/* + * + * PMU implementation + * + */ + + +#ifdef CONFIG_ADB_PMU + +static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len) +{ + // TODO + return -ENODEV; +} + +static void pmu_low_i2c_add(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(NULL); + + if (host == NULL) { + printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", + np->full_name); + return; + } + memset(host, 0, sizeof(*host)); + + init_MUTEX(&host->mutex); + host->np = of_node_get(np); + host->num_channels = 3; + host->mode = pmac_low_i2c_mode_std; + host->func = pmu_low_i2c_func; +} + +#endif /* CONFIG_ADB_PMU */ + +void __init pmac_init_low_i2c(void) +{ + struct device_node *np; + + /* Probe keywest-i2c busses */ + np = of_find_compatible_node(NULL, "i2c", "keywest-i2c"); + while(np) { + keywest_low_i2c_add(np); + np = of_find_compatible_node(np, "i2c", "keywest-i2c"); + } + +#ifdef CONFIG_ADB_PMU + /* Probe PMU busses */ + np = of_find_node_by_name(NULL, "via-pmu"); + if (np) + pmu_low_i2c_add(np); +#endif /* CONFIG_ADB_PMU */ + + /* TODO: Add CUDA support as well */ +} + +int pmac_low_i2c_lock(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + down(&host->mutex); + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_lock); + +int pmac_low_i2c_unlock(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + up(&host->mutex); + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_unlock); + + +int pmac_low_i2c_open(struct device_node *np, int channel) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + + if (channel >= host->num_channels) + return -EINVAL; + + down(&host->mutex); + host->is_open = 1; + host->channel = channel; + + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_open); + +int pmac_low_i2c_close(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + + host->is_open = 0; + up(&host->mutex); + + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_close); + +int pmac_low_i2c_setmode(struct device_node *np, int mode) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + WARN_ON(!host->is_open); + host->mode = mode; + + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_setmode); + +int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + WARN_ON(!host->is_open); + + return host->func(host, addrdir, subaddr, data, len); +} +EXPORT_SYMBOL(pmac_low_i2c_xfer); + diff --git a/arch/powerpc/platforms/powermac/pmac_nvram.c b/arch/powerpc/platforms/powermac/pmac_nvram.c new file mode 100644 index 00000000000..8c9b008c722 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_nvram.c @@ -0,0 +1,584 @@ +/* + * arch/ppc/platforms/pmac_nvram.c + * + * Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Todo: - add support for the OF persistent properties + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/string.h> +#include <linux/nvram.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/bootmem.h> +#include <linux/completion.h> +#include <linux/spinlock.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/nvram.h> + +#define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define NVRAM_SIZE 0x2000 /* 8kB of non-volatile RAM */ + +#define CORE99_SIGNATURE 0x5a +#define CORE99_ADLER_START 0x14 + +/* On Core99, nvram is either a sharp, a micron or an AMD flash */ +#define SM_FLASH_STATUS_DONE 0x80 +#define SM_FLASH_STATUS_ERR 0x38 +#define SM_FLASH_CMD_ERASE_CONFIRM 0xd0 +#define SM_FLASH_CMD_ERASE_SETUP 0x20 +#define SM_FLASH_CMD_RESET 0xff +#define SM_FLASH_CMD_WRITE_SETUP 0x40 +#define SM_FLASH_CMD_CLEAR_STATUS 0x50 +#define SM_FLASH_CMD_READ_STATUS 0x70 + +/* CHRP NVRAM header */ +struct chrp_header { + u8 signature; + u8 cksum; + u16 len; + char name[12]; + u8 data[0]; +}; + +struct core99_header { + struct chrp_header hdr; + u32 adler; + u32 generation; + u32 reserved[2]; +}; + +/* + * Read and write the non-volatile RAM on PowerMacs and CHRP machines. + */ +static int nvram_naddrs; +static volatile unsigned char *nvram_addr; +static volatile unsigned char *nvram_data; +static int nvram_mult, is_core_99; +static int core99_bank = 0; +static int nvram_partitions[3]; +static DEFINE_SPINLOCK(nv_lock); + +extern int pmac_newworld; +extern int system_running; + +static int (*core99_write_bank)(int bank, u8* datas); +static int (*core99_erase_bank)(int bank); + +static char *nvram_image; + + +static unsigned char core99_nvram_read_byte(int addr) +{ + if (nvram_image == NULL) + return 0xff; + return nvram_image[addr]; +} + +static void core99_nvram_write_byte(int addr, unsigned char val) +{ + if (nvram_image == NULL) + return; + nvram_image[addr] = val; +} + + +static unsigned char direct_nvram_read_byte(int addr) +{ + return in_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult]); +} + +static void direct_nvram_write_byte(int addr, unsigned char val) +{ + out_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult], val); +} + + +static unsigned char indirect_nvram_read_byte(int addr) +{ + unsigned char val; + unsigned long flags; + + spin_lock_irqsave(&nv_lock, flags); + out_8(nvram_addr, addr >> 5); + val = in_8(&nvram_data[(addr & 0x1f) << 4]); + spin_unlock_irqrestore(&nv_lock, flags); + + return val; +} + +static void indirect_nvram_write_byte(int addr, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&nv_lock, flags); + out_8(nvram_addr, addr >> 5); + out_8(&nvram_data[(addr & 0x1f) << 4], val); + spin_unlock_irqrestore(&nv_lock, flags); +} + + +#ifdef CONFIG_ADB_PMU + +static void pmu_nvram_complete(struct adb_request *req) +{ + if (req->arg) + complete((struct completion *)req->arg); +} + +static unsigned char pmu_nvram_read_byte(int addr) +{ + struct adb_request req; + DECLARE_COMPLETION(req_complete); + + req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; + if (pmu_request(&req, pmu_nvram_complete, 3, PMU_READ_NVRAM, + (addr >> 8) & 0xff, addr & 0xff)) + return 0xff; + if (system_state == SYSTEM_RUNNING) + wait_for_completion(&req_complete); + while (!req.complete) + pmu_poll(); + return req.reply[0]; +} + +static void pmu_nvram_write_byte(int addr, unsigned char val) +{ + struct adb_request req; + DECLARE_COMPLETION(req_complete); + + req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; + if (pmu_request(&req, pmu_nvram_complete, 4, PMU_WRITE_NVRAM, + (addr >> 8) & 0xff, addr & 0xff, val)) + return; + if (system_state == SYSTEM_RUNNING) + wait_for_completion(&req_complete); + while (!req.complete) + pmu_poll(); +} + +#endif /* CONFIG_ADB_PMU */ + + +static u8 chrp_checksum(struct chrp_header* hdr) +{ + u8 *ptr; + u16 sum = hdr->signature; + for (ptr = (u8 *)&hdr->len; ptr < hdr->data; ptr++) + sum += *ptr; + while (sum > 0xFF) + sum = (sum & 0xFF) + (sum>>8); + return sum; +} + +static u32 core99_calc_adler(u8 *buffer) +{ + int cnt; + u32 low, high; + + buffer += CORE99_ADLER_START; + low = 1; + high = 0; + for (cnt=0; cnt<(NVRAM_SIZE-CORE99_ADLER_START); cnt++) { + if ((cnt % 5000) == 0) { + high %= 65521UL; + high %= 65521UL; + } + low += buffer[cnt]; + high += low; + } + low %= 65521UL; + high %= 65521UL; + + return (high << 16) | low; +} + +static u32 core99_check(u8* datas) +{ + struct core99_header* hdr99 = (struct core99_header*)datas; + + if (hdr99->hdr.signature != CORE99_SIGNATURE) { + DBG("Invalid signature\n"); + return 0; + } + if (hdr99->hdr.cksum != chrp_checksum(&hdr99->hdr)) { + DBG("Invalid checksum\n"); + return 0; + } + if (hdr99->adler != core99_calc_adler(datas)) { + DBG("Invalid adler\n"); + return 0; + } + return hdr99->generation; +} + +static int sm_erase_bank(int bank) +{ + int stat, i; + unsigned long timeout; + + u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank); + + out_8(base, SM_FLASH_CMD_ERASE_SETUP); + out_8(base, SM_FLASH_CMD_ERASE_CONFIRM); + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: Sharp/Miron flash erase timeout !\n"); + break; + } + out_8(base, SM_FLASH_CMD_READ_STATUS); + stat = in_8(base); + } while (!(stat & SM_FLASH_STATUS_DONE)); + + out_8(base, SM_FLASH_CMD_CLEAR_STATUS); + out_8(base, SM_FLASH_CMD_RESET); + + for (i=0; i<NVRAM_SIZE; i++) + if (base[i] != 0xff) { + printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n"); + return -ENXIO; + } + return 0; +} + +static int sm_write_bank(int bank, u8* datas) +{ + int i, stat = 0; + unsigned long timeout; + + u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: Sharp/Micron Writing bank %d...\n", bank); + + for (i=0; i<NVRAM_SIZE; i++) { + out_8(base+i, SM_FLASH_CMD_WRITE_SETUP); + udelay(1); + out_8(base+i, datas[i]); + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n"); + break; + } + out_8(base, SM_FLASH_CMD_READ_STATUS); + stat = in_8(base); + } while (!(stat & SM_FLASH_STATUS_DONE)); + if (!(stat & SM_FLASH_STATUS_DONE)) + break; + } + out_8(base, SM_FLASH_CMD_CLEAR_STATUS); + out_8(base, SM_FLASH_CMD_RESET); + for (i=0; i<NVRAM_SIZE; i++) + if (base[i] != datas[i]) { + printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n"); + return -ENXIO; + } + return 0; +} + +static int amd_erase_bank(int bank) +{ + int i, stat = 0; + unsigned long timeout; + + u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: AMD Erasing bank %d...\n", bank); + + /* Unlock 1 */ + out_8(base+0x555, 0xaa); + udelay(1); + /* Unlock 2 */ + out_8(base+0x2aa, 0x55); + udelay(1); + + /* Sector-Erase */ + out_8(base+0x555, 0x80); + udelay(1); + out_8(base+0x555, 0xaa); + udelay(1); + out_8(base+0x2aa, 0x55); + udelay(1); + out_8(base, 0x30); + udelay(1); + + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: AMD flash erase timeout !\n"); + break; + } + stat = in_8(base) ^ in_8(base); + } while (stat != 0); + + /* Reset */ + out_8(base, 0xf0); + udelay(1); + + for (i=0; i<NVRAM_SIZE; i++) + if (base[i] != 0xff) { + printk(KERN_ERR "nvram: AMD flash erase failed !\n"); + return -ENXIO; + } + return 0; +} + +static int amd_write_bank(int bank, u8* datas) +{ + int i, stat = 0; + unsigned long timeout; + + u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: AMD Writing bank %d...\n", bank); + + for (i=0; i<NVRAM_SIZE; i++) { + /* Unlock 1 */ + out_8(base+0x555, 0xaa); + udelay(1); + /* Unlock 2 */ + out_8(base+0x2aa, 0x55); + udelay(1); + + /* Write single word */ + out_8(base+0x555, 0xa0); + udelay(1); + out_8(base+i, datas[i]); + + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: AMD flash write timeout !\n"); + break; + } + stat = in_8(base) ^ in_8(base); + } while (stat != 0); + if (stat != 0) + break; + } + + /* Reset */ + out_8(base, 0xf0); + udelay(1); + + for (i=0; i<NVRAM_SIZE; i++) + if (base[i] != datas[i]) { + printk(KERN_ERR "nvram: AMD flash write failed !\n"); + return -ENXIO; + } + return 0; +} + +static void __init lookup_partitions(void) +{ + u8 buffer[17]; + int i, offset; + struct chrp_header* hdr; + + if (pmac_newworld) { + nvram_partitions[pmac_nvram_OF] = -1; + nvram_partitions[pmac_nvram_XPRAM] = -1; + nvram_partitions[pmac_nvram_NR] = -1; + hdr = (struct chrp_header *)buffer; + + offset = 0; + buffer[16] = 0; + do { + for (i=0;i<16;i++) + buffer[i] = nvram_read_byte(offset+i); + if (!strcmp(hdr->name, "common")) + nvram_partitions[pmac_nvram_OF] = offset + 0x10; + if (!strcmp(hdr->name, "APL,MacOS75")) { + nvram_partitions[pmac_nvram_XPRAM] = offset + 0x10; + nvram_partitions[pmac_nvram_NR] = offset + 0x110; + } + offset += (hdr->len * 0x10); + } while(offset < NVRAM_SIZE); + } else { + nvram_partitions[pmac_nvram_OF] = 0x1800; + nvram_partitions[pmac_nvram_XPRAM] = 0x1300; + nvram_partitions[pmac_nvram_NR] = 0x1400; + } + DBG("nvram: OF partition at 0x%x\n", nvram_partitions[pmac_nvram_OF]); + DBG("nvram: XP partition at 0x%x\n", nvram_partitions[pmac_nvram_XPRAM]); + DBG("nvram: NR partition at 0x%x\n", nvram_partitions[pmac_nvram_NR]); +} + +static void core99_nvram_sync(void) +{ + struct core99_header* hdr99; + unsigned long flags; + + if (!is_core_99 || !nvram_data || !nvram_image) + return; + + spin_lock_irqsave(&nv_lock, flags); + if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE, + NVRAM_SIZE)) + goto bail; + + DBG("Updating nvram...\n"); + + hdr99 = (struct core99_header*)nvram_image; + hdr99->generation++; + hdr99->hdr.signature = CORE99_SIGNATURE; + hdr99->hdr.cksum = chrp_checksum(&hdr99->hdr); + hdr99->adler = core99_calc_adler(nvram_image); + core99_bank = core99_bank ? 0 : 1; + if (core99_erase_bank) + if (core99_erase_bank(core99_bank)) { + printk("nvram: Error erasing bank %d\n", core99_bank); + goto bail; + } + if (core99_write_bank) + if (core99_write_bank(core99_bank, nvram_image)) + printk("nvram: Error writing bank %d\n", core99_bank); + bail: + spin_unlock_irqrestore(&nv_lock, flags); + +#ifdef DEBUG + mdelay(2000); +#endif +} + +void __init pmac_nvram_init(void) +{ + struct device_node *dp; + + nvram_naddrs = 0; + + dp = find_devices("nvram"); + if (dp == NULL) { + printk(KERN_ERR "Can't find NVRAM device\n"); + return; + } + nvram_naddrs = dp->n_addrs; + is_core_99 = device_is_compatible(dp, "nvram,flash"); + if (is_core_99) { + int i; + u32 gen_bank0, gen_bank1; + + if (nvram_naddrs < 1) { + printk(KERN_ERR "nvram: no address\n"); + return; + } + nvram_image = alloc_bootmem(NVRAM_SIZE); + if (nvram_image == NULL) { + printk(KERN_ERR "nvram: can't allocate ram image\n"); + return; + } + nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2); + nvram_naddrs = 1; /* Make sure we get the correct case */ + + DBG("nvram: Checking bank 0...\n"); + + gen_bank0 = core99_check((u8 *)nvram_data); + gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE); + core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0; + + DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1); + DBG("nvram: Active bank is: %d\n", core99_bank); + + for (i=0; i<NVRAM_SIZE; i++) + nvram_image[i] = nvram_data[i + core99_bank*NVRAM_SIZE]; + + ppc_md.nvram_read_val = core99_nvram_read_byte; + ppc_md.nvram_write_val = core99_nvram_write_byte; + ppc_md.nvram_sync = core99_nvram_sync; + /* + * Maybe we could be smarter here though making an exclusive list + * of known flash chips is a bit nasty as older OF didn't provide us + * with a useful "compatible" entry. A solution would be to really + * identify the chip using flash id commands and base ourselves on + * a list of known chips IDs + */ + if (device_is_compatible(dp, "amd-0137")) { + core99_erase_bank = amd_erase_bank; + core99_write_bank = amd_write_bank; + } else { + core99_erase_bank = sm_erase_bank; + core99_write_bank = sm_write_bank; + } + } else if (_machine == _MACH_chrp && nvram_naddrs == 1) { + nvram_data = ioremap(dp->addrs[0].address + isa_mem_base, + dp->addrs[0].size); + nvram_mult = 1; + ppc_md.nvram_read_val = direct_nvram_read_byte; + ppc_md.nvram_write_val = direct_nvram_write_byte; + } else if (nvram_naddrs == 1) { + nvram_data = ioremap(dp->addrs[0].address, dp->addrs[0].size); + nvram_mult = (dp->addrs[0].size + NVRAM_SIZE - 1) / NVRAM_SIZE; + ppc_md.nvram_read_val = direct_nvram_read_byte; + ppc_md.nvram_write_val = direct_nvram_write_byte; + } else if (nvram_naddrs == 2) { + nvram_addr = ioremap(dp->addrs[0].address, dp->addrs[0].size); + nvram_data = ioremap(dp->addrs[1].address, dp->addrs[1].size); + ppc_md.nvram_read_val = indirect_nvram_read_byte; + ppc_md.nvram_write_val = indirect_nvram_write_byte; + } else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) { +#ifdef CONFIG_ADB_PMU + nvram_naddrs = -1; + ppc_md.nvram_read_val = pmu_nvram_read_byte; + ppc_md.nvram_write_val = pmu_nvram_write_byte; +#endif /* CONFIG_ADB_PMU */ + } else { + printk(KERN_ERR "Don't know how to access NVRAM with %d addresses\n", + nvram_naddrs); + } + lookup_partitions(); +} + +int pmac_get_partition(int partition) +{ + return nvram_partitions[partition]; +} + +u8 pmac_xpram_read(int xpaddr) +{ + int offset = nvram_partitions[pmac_nvram_XPRAM]; + + if (offset < 0) + return 0xff; + + return ppc_md.nvram_read_val(xpaddr + offset); +} + +void pmac_xpram_write(int xpaddr, u8 data) +{ + int offset = nvram_partitions[pmac_nvram_XPRAM]; + + if (offset < 0) + return; + + ppc_md.nvram_write_val(xpaddr + offset, data); +} + +EXPORT_SYMBOL(pmac_get_partition); +EXPORT_SYMBOL(pmac_xpram_read); +EXPORT_SYMBOL(pmac_xpram_write); diff --git a/arch/powerpc/platforms/powermac/pmac_pci.c b/arch/powerpc/platforms/powermac/pmac_pci.c new file mode 100644 index 00000000000..40bcd3e55af --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_pci.c @@ -0,0 +1,1341 @@ +/* + * Support for PCI bridges found on Power Macintoshes. + * At present the "bandit" and "chaos" bridges are supported. + * Fortunately you access configuration space in the same + * way with either bridge. + * + * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org) + * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static int add_bridge(struct device_node *dev); +extern void pmac_check_ht_link(void); + +/* XXX Could be per-controller, but I don't think we risk anything by + * assuming we won't have both UniNorth and Bandit */ +static int has_uninorth; +#ifdef CONFIG_POWER4 +static struct pci_controller *u3_agp; +#endif /* CONFIG_POWER4 */ + +extern u8 pci_cache_line_size; +extern int pcibios_assign_bus_offset; + +struct device_node *k2_skiplist[2]; + +/* + * Magic constants for enabling cache coherency in the bandit/PSX bridge. + */ +#define BANDIT_DEVID_2 8 +#define BANDIT_REVID 3 + +#define BANDIT_DEVNUM 11 +#define BANDIT_MAGIC 0x50 +#define BANDIT_COHERENT 0x40 + +static int __init fixup_one_level_bus_range(struct device_node *node, int higher) +{ + for (; node != 0;node = node->sibling) { + int * bus_range; + unsigned int *class_code; + int len; + + /* For PCI<->PCI bridges or CardBus bridges, we go down */ + class_code = (unsigned int *) get_property(node, "class-code", NULL); + if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + bus_range = (int *) get_property(node, "bus-range", &len); + if (bus_range != NULL && len > 2 * sizeof(int)) { + if (bus_range[1] > higher) + higher = bus_range[1]; + } + higher = fixup_one_level_bus_range(node->child, higher); + } + return higher; +} + +/* This routine fixes the "bus-range" property of all bridges in the + * system since they tend to have their "last" member wrong on macs + * + * Note that the bus numbers manipulated here are OF bus numbers, they + * are not Linux bus numbers. + */ +static void __init fixup_bus_range(struct device_node *bridge) +{ + int * bus_range; + int len; + + /* Lookup the "bus-range" property for the hose */ + bus_range = (int *) get_property(bridge, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + bridge->full_name); + return; + } + bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); +} + +/* + * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. + * + * The "Bandit" version is present in all early PCI PowerMacs, + * and up to the first ones using Grackle. Some machines may + * have 2 bandit controllers (2 PCI busses). + * + * "Chaos" is used in some "Bandit"-type machines as a bridge + * for the separate display bus. It is accessed the same + * way as bandit, but cannot be probed for devices. It therefore + * has its own config access functions. + * + * The "UniNorth" version is present in all Core99 machines + * (iBook, G4, new IMacs, and all the recent Apple machines). + * It contains 3 controllers in one ASIC. + * + * The U3 is the bridge used on G5 machines. It contains an + * AGP bus which is dealt with the old UniNorth access routines + * and a HyperTransport bus which uses its own set of access + * functions. + */ + +#define MACRISC_CFA0(devfn, off) \ + ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ + | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned long)(off)) & 0xFCUL)) + +#define MACRISC_CFA1(bus, devfn, off) \ + ((((unsigned long)(bus)) << 16) \ + |(((unsigned long)(devfn)) << 8) \ + |(((unsigned long)(off)) & 0xFCUL) \ + |1UL) + +static unsigned long macrisc_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, u8 offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + if (dev_fn < (11 << 3)) + return 0; + caddr = MACRISC_CFA0(dev_fn, offset); + } else + caddr = MACRISC_CFA1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= has_uninorth ? 0x07 : 0x03; + return ((unsigned long)hose->cfg_data) + offset; +} + +static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr; + + addr = macrisc_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr; + + addr = macrisc_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops macrisc_pci_ops = +{ + macrisc_read_config, + macrisc_write_config +}; + +/* + * Verifiy that a specific (bus, dev_fn) exists on chaos + */ +static int +chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) +{ + struct device_node *np; + u32 *vendor, *device; + + np = pci_busdev_to_OF_node(bus, devfn); + if (np == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + vendor = (u32 *)get_property(np, "vendor-id", NULL); + device = (u32 *)get_property(np, "device-id", NULL); + if (vendor == NULL || device == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10) + && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + return PCIBIOS_SUCCESSFUL; +} + +static int +chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + int result = chaos_validate_dev(bus, devfn, offset); + if (result == PCIBIOS_BAD_REGISTER_NUMBER) + *val = ~0U; + if (result != PCIBIOS_SUCCESSFUL) + return result; + return macrisc_read_config(bus, devfn, offset, len, val); +} + +static int +chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + int result = chaos_validate_dev(bus, devfn, offset); + if (result != PCIBIOS_SUCCESSFUL) + return result; + return macrisc_write_config(bus, devfn, offset, len, val); +} + +static struct pci_ops chaos_pci_ops = +{ + chaos_read_config, + chaos_write_config +}; + +#ifdef CONFIG_POWER4 + +/* + * These versions of U3 HyperTransport config space access ops do not + * implement self-view of the HT host yet + */ + +/* + * This function deals with some "special cases" devices. + * + * 0 -> No special case + * 1 -> Skip the device but act as if the access was successfull + * (return 0xff's on reads, eventually, cache config space + * accesses in a later version) + * -1 -> Hide the device (unsuccessful acess) + */ +static int u3_ht_skip_device(struct pci_controller *hose, + struct pci_bus *bus, unsigned int devfn) +{ + struct device_node *busdn, *dn; + int i; + + /* We only allow config cycles to devices that are in OF device-tree + * as we are apparently having some weird things going on with some + * revs of K2 on recent G5s + */ + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = hose->arch_data; + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->data && PCI_DN(dn)->devfn == devfn) + break; + if (dn == NULL) + return -1; + + /* + * When a device in K2 is powered down, we die on config + * cycle accesses. Fix that here. + */ + for (i=0; i<2; i++) + if (k2_skiplist[i] == dn) + return 1; + + return 0; +} + +#define U3_HT_CFA0(devfn, off) \ + ((((unsigned long)devfn) << 8) | offset) +#define U3_HT_CFA1(bus, devfn, off) \ + (U3_HT_CFA0(devfn, off) \ + + (((unsigned long)bus) << 16) \ + + 0x01000000UL) + +static unsigned long u3_ht_cfg_access(struct pci_controller* hose, + u8 bus, u8 devfn, u8 offset) +{ + if (bus == hose->first_busno) { + /* For now, we don't self probe U3 HT bridge */ + if (PCI_SLOT(devfn) == 0) + return 0; + return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); + } else + return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); +} + +static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr; + + struct device_node *np = pci_busdev_to_OF_node(bus, devfn); + if (np == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (u3_ht_skip_device(hose, bus, devfn)) { + case 0: + break; + case 1: + switch (len) { + case 1: + *val = 0xff; break; + case 2: + *val = 0xffff; break; + default: + *val = 0xfffffffful; break; + } + return PCIBIOS_SUCCESSFUL; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr; + + struct device_node *np = pci_busdev_to_OF_node(bus, devfn); + if (np == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (u3_ht_skip_device(hose, bus, devfn)) { + case 0: + break; + case 1: + return PCIBIOS_SUCCESSFUL; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_ht_pci_ops = +{ + u3_ht_read_config, + u3_ht_write_config +}; + +#endif /* CONFIG_POWER4 */ + +/* + * For a bandit bridge, turn on cache coherency if necessary. + * N.B. we could clean this up using the hose ops directly. + */ +static void __init +init_bandit(struct pci_controller *bp) +{ + unsigned int vendev, magic; + int rev; + + /* read the word at offset 0 in config space for device 11 */ + out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID); + udelay(2); + vendev = in_le32(bp->cfg_data); + if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) + + PCI_VENDOR_ID_APPLE) { + /* read the revision id */ + out_le32(bp->cfg_addr, + (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID); + udelay(2); + rev = in_8(bp->cfg_data); + if (rev != BANDIT_REVID) + printk(KERN_WARNING + "Unknown revision %d for bandit\n", rev); + } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) { + printk(KERN_WARNING "bandit isn't? (%x)\n", vendev); + return; + } + + /* read the word at offset 0x50 */ + out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC); + udelay(2); + magic = in_le32(bp->cfg_data); + if ((magic & BANDIT_COHERENT) != 0) + return; + magic |= BANDIT_COHERENT; + udelay(2); + out_le32(bp->cfg_data, magic); + printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n"); +} + + +/* + * Tweak the PCI-PCI bridge chip on the blue & white G3s. + */ +static void __init +init_p2pbridge(void) +{ + struct device_node *p2pbridge; + struct pci_controller* hose; + u8 bus, devfn; + u16 val; + + /* XXX it would be better here to identify the specific + PCI-PCI bridge chip we have. */ + if ((p2pbridge = find_devices("pci-bridge")) == 0 + || p2pbridge->parent == NULL + || strcmp(p2pbridge->parent->name, "pci") != 0) + return; + if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) { + DBG("Can't find PCI infos for PCI<->PCI bridge\n"); + return; + } + /* Warning: At this point, we have not yet renumbered all busses. + * So we must use OF walking to find out hose + */ + hose = pci_find_hose_for_OF_device(p2pbridge); + if (!hose) { + DBG("Can't find hose for PCI<->PCI bridge\n"); + return; + } + if (early_read_config_word(hose, bus, devfn, + PCI_BRIDGE_CONTROL, &val) < 0) { + printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n"); + return; + } + val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; + early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); +} + +/* + * Some Apple desktop machines have a NEC PD720100A USB2 controller + * on the motherboard. Open Firmware, on these, will disable the + * EHCI part of it so it behaves like a pair of OHCI's. This fixup + * code re-enables it ;) + */ +static void __init +fixup_nec_usb2(void) +{ + struct device_node *nec; + + for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) { + struct pci_controller *hose; + u32 data, *prop; + u8 bus, devfn; + + prop = (u32 *)get_property(nec, "vendor-id", NULL); + if (prop == NULL) + continue; + if (0x1033 != *prop) + continue; + prop = (u32 *)get_property(nec, "device-id", NULL); + if (prop == NULL) + continue; + if (0x0035 != *prop) + continue; + prop = (u32 *)get_property(nec, "reg", NULL); + if (prop == NULL) + continue; + devfn = (prop[0] >> 8) & 0xff; + bus = (prop[0] >> 16) & 0xff; + if (PCI_FUNC(devfn) != 0) + continue; + hose = pci_find_hose_for_OF_device(nec); + if (!hose) + continue; + early_read_config_dword(hose, bus, devfn, 0xe4, &data); + if (data & 1UL) { + printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n"); + data &= ~1UL; + early_write_config_dword(hose, bus, devfn, 0xe4, data); + early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE, + nec->intrs[0].line); + } + } +} + +void __init +pmac_find_bridges(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "bandit") == 0 + || strcmp(np->name, "chaos") == 0 + || strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Probe HT last as it relies on the agp resources to be already + * setup + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + init_p2pbridge(); + fixup_nec_usb2(); + + /* We are still having some issues with the Xserve G4, enabling + * some offset between bus number and domains for now when we + * assign all busses should help for now + */ + if (pci_assign_all_busses) + pcibios_assign_bus_offset = 0x10; + +#ifdef CONFIG_POWER4 + /* There is something wrong with DMA on U3/HT. I haven't figured out + * the details yet, but if I set the cache line size to 128 bytes like + * it should, I'm getting memory corruption caused by devices like + * sungem (even without the MWI bit set, but maybe sungem doesn't + * care). Right now, it appears that setting up a 64 bytes line size + * works properly, 64 bytes beeing the max transfer size of HT, I + * suppose this is related the way HT/PCI are hooked together. I still + * need to dive into more specs though to be really sure of what's + * going on. --BenH. + * + * Ok, apparently, it's just that HT can't do more than 64 bytes + * transactions. MWI seem to be meaningless there as well, it may + * be worth nop'ing out pci_set_mwi too though I haven't done that + * yet. + * + * Note that it's a bit different for whatever is in the AGP slot. + * For now, I don't care, but this can become a real issue, we + * should probably hook pci_set_mwi anyway to make sure it sets + * the real cache line size in there. + */ + if (machine_is_compatible("MacRISC4")) + pci_cache_line_size = 16; /* 64 bytes */ + + pmac_check_ht_link(); +#endif /* CONFIG_POWER4 */ +} + +#define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \ + | (((o) & ~3) << 24)) + +#define GRACKLE_PICR1_STG 0x00000040 +#define GRACKLE_PICR1_LOOPSNOOP 0x00000010 + +/* N.B. this is called before bridges is initialized, so we can't + use grackle_pcibios_{read,write}_config_dword. */ +static inline void grackle_set_stg(struct pci_controller* bp, int enable) +{ + unsigned int val; + + out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); + val = in_le32(bp->cfg_data); + val = enable? (val | GRACKLE_PICR1_STG) : + (val & ~GRACKLE_PICR1_STG); + out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); + out_le32(bp->cfg_data, val); + (void)in_le32(bp->cfg_data); +} + +static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable) +{ + unsigned int val; + + out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); + val = in_le32(bp->cfg_data); + val = enable? (val | GRACKLE_PICR1_LOOPSNOOP) : + (val & ~GRACKLE_PICR1_LOOPSNOOP); + out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8)); + out_le32(bp->cfg_data, val); + (void)in_le32(bp->cfg_data); +} + +static int __init +setup_uninorth(struct pci_controller* hose, struct reg_property* addr) +{ + pci_assign_all_busses = 1; + has_uninorth = 1; + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + /* We "know" that the bridge at f2000000 has the PCI slots. */ + return addr->address == 0xf2000000; +} + +static void __init +setup_bandit(struct pci_controller* hose, struct reg_property* addr) +{ + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + init_bandit(hose); +} + +static void __init +setup_chaos(struct pci_controller* hose, struct reg_property* addr) +{ + /* assume a `chaos' bridge */ + hose->ops = &chaos_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); +} + +#ifdef CONFIG_POWER4 + +static void __init setup_u3_agp(struct pci_controller* hose) +{ + /* On G5, we move AGP up to high bus number so we don't need + * to reassign bus numbers for HT. If we ever have P2P bridges + * on AGP, we'll have to move pci_assign_all_busses to the + * pci_controller structure so we enable it for AGP and not for + * HT childs. + * We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->first_busno = 0xf0; + hose->last_busno = 0xff; + has_uninorth = 1; + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + u3_agp = hose; +} + +static void __init setup_u3_ht(struct pci_controller* hose) +{ + struct device_node *np = (struct device_node *)hose->arch_data; + int i, cur; + + hose->ops = &u3_ht_pci_ops; + + /* We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + + /* + * /ht node doesn't expose a "ranges" property, so we "remove" regions that + * have been allocated to AGP. So far, this version of the code doesn't assign + * any of the 0xfxxxxxxx "fine" memory regions to /ht. + * We need to fix that sooner or later by either parsing all child "ranges" + * properties or figuring out the U3 address space decoding logic and + * then read its configuration register (if any). + */ + hose->io_base_phys = 0xf4000000; + hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000); + isa_io_base = (unsigned long) hose->io_base_virt; + hose->io_resource.name = np->full_name; + hose->io_resource.start = 0; + hose->io_resource.end = 0x003fffff; + hose->io_resource.flags = IORESOURCE_IO; + hose->pci_mem_offset = 0; + hose->first_busno = 0; + hose->last_busno = 0xef; + hose->mem_resources[0].name = np->full_name; + hose->mem_resources[0].start = 0x80000000; + hose->mem_resources[0].end = 0xefffffff; + hose->mem_resources[0].flags = IORESOURCE_MEM; + + if (u3_agp == NULL) { + DBG("U3 has no AGP, using full resource range\n"); + return; + } + + /* We "remove" the AGP resources from the resources allocated to HT, that + * is we create "holes". However, that code does assumptions that so far + * happen to be true (cross fingers...), typically that resources in the + * AGP node are properly ordered + */ + cur = 0; + for (i=0; i<3; i++) { + struct resource *res = &u3_agp->mem_resources[i]; + if (res->flags != IORESOURCE_MEM) + continue; + /* We don't care about "fine" resources */ + if (res->start >= 0xf0000000) + continue; + /* Check if it's just a matter of "shrinking" us in one direction */ + if (hose->mem_resources[cur].start == res->start) { + DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", + cur, hose->mem_resources[cur].start, res->end + 1); + hose->mem_resources[cur].start = res->end + 1; + continue; + } + if (hose->mem_resources[cur].end == res->end) { + DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", + cur, hose->mem_resources[cur].end, res->start - 1); + hose->mem_resources[cur].end = res->start - 1; + continue; + } + /* No, it's not the case, we need a hole */ + if (cur == 2) { + /* not enough resources to make a hole, we drop part of the range */ + printk(KERN_WARNING "Running out of resources for /ht host !\n"); + hose->mem_resources[cur].end = res->start - 1; + continue; + } + cur++; + DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", + cur-1, res->start - 1, cur, res->end + 1); + hose->mem_resources[cur].name = np->full_name; + hose->mem_resources[cur].flags = IORESOURCE_MEM; + hose->mem_resources[cur].start = res->end + 1; + hose->mem_resources[cur].end = hose->mem_resources[cur-1].end; + hose->mem_resources[cur-1].end = res->start - 1; + } +} + +#endif /* CONFIG_POWER4 */ + +void __init +setup_grackle(struct pci_controller *hose) +{ + setup_indirect_pci(hose, 0xfec00000, 0xfee00000); + if (machine_is_compatible("AAPL,PowerBook1998")) + grackle_set_loop_snoop(hose, 1); +#if 0 /* Disabled for now, HW problems ??? */ + grackle_set_stg(hose, 1); +#endif +} + +static void __init pmac_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int primary) +{ + static unsigned int static_lc_ranges[2024]; + unsigned int *dt_ranges, *lc_ranges, *ranges, *prev; + unsigned int size; + int rlen = 0, orig_rlen; + int memno = 0; + struct resource *res; + int np, na = prom_n_addr_cells(dev); + + np = na + 5; + + /* First we try to merge ranges to fix a problem with some pmacs + * that can have more than 3 ranges, fortunately using contiguous + * addresses -- BenH + */ + dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen); + if (!dt_ranges) + return; + /* lc_ranges = alloc_bootmem(rlen);*/ + lc_ranges = static_lc_ranges; + if (!lc_ranges) + return; /* what can we do here ? */ + memcpy(lc_ranges, dt_ranges, rlen); + orig_rlen = rlen; + + /* Let's work on a copy of the "ranges" property instead of damaging + * the device-tree image in memory + */ + ranges = lc_ranges; + prev = NULL; + while ((rlen -= np * sizeof(unsigned int)) >= 0) { + if (prev) { + if (prev[0] == ranges[0] && prev[1] == ranges[1] && + (prev[2] + prev[na+4]) == ranges[2] && + (prev[na+2] + prev[na+4]) == ranges[na+2]) { + prev[na+4] += ranges[na+4]; + ranges[0] = 0; + ranges += np; + continue; + } + } + prev = ranges; + ranges += np; + } + + /* + * The ranges property is laid out as an array of elements, + * each of which comprises: + * cells 0 - 2: a PCI address + * cells 3 or 3+4: a CPU physical address + * (size depending on dev->n_addr_cells) + * cells 4+5 or 5+6: the size of the range + */ + ranges = lc_ranges; + rlen = orig_rlen; + while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { + res = NULL; + size = ranges[na+4]; + switch (ranges[0] >> 24) { + case 1: /* I/O space */ + if (ranges[2] != 0) + break; + hose->io_base_phys = ranges[na+2]; + /* limit I/O space to 16MB */ + if (size > 0x01000000) + size = 0x01000000; + hose->io_base_virt = ioremap(ranges[na+2], size); + if (primary) + isa_io_base = (unsigned long) hose->io_base_virt; + res = &hose->io_resource; + res->flags = IORESOURCE_IO; + res->start = ranges[2]; + break; + case 2: /* memory space */ + memno = 0; + if (ranges[1] == 0 && ranges[2] == 0 + && ranges[na+4] <= (16 << 20)) { + /* 1st 16MB, i.e. ISA memory area */ +#if 0 + if (primary) + isa_mem_base = ranges[na+2]; +#endif + memno = 1; + } + while (memno < 3 && hose->mem_resources[memno].flags) + ++memno; + if (memno == 0) + hose->pci_mem_offset = ranges[na+2] - ranges[2]; + if (memno < 3) { + res = &hose->mem_resources[memno]; + res->flags = IORESOURCE_MEM; + res->start = ranges[na+2]; + } + break; + } + if (res != NULL) { + res->name = dev->full_name; + res->end = res->start + size - 1; + res->parent = NULL; + res->sibling = NULL; + res->child = NULL; + } + ranges += np; + } +} + +/* + * We assume that if we have a G3 powermac, we have one bridge called + * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, + * if we have one or more bandit or chaos bridges, we don't have a MPC106. + */ +static int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct reg_property *addr; + char* disp_name; + int *bus_range; + int primary = 1; + + DBG("Adding PCI host bridge %s\n", dev->full_name); + + addr = (struct reg_property *) get_property(dev, "reg", &len); + if (addr == NULL || len < sizeof(*addr)) { + printk(KERN_WARNING "Can't use %s: no address\n", + dev->full_name); + return -ENODEV; + } + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", + dev->full_name); + } + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + hose->arch_data = dev; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + disp_name = NULL; +#ifdef CONFIG_POWER4 + if (device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose, addr); + disp_name = "U3-AGP"; + primary = 0; + } else if (device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose, addr); + disp_name = "U3-HT"; + primary = 1; + } else +#endif /* CONFIG_POWER4 */ + if (device_is_compatible(dev, "uni-north")) { + primary = setup_uninorth(hose, addr); + disp_name = "UniNorth"; + } else if (strcmp(dev->name, "pci") == 0) { + /* XXX assume this is a mpc106 (grackle) */ + setup_grackle(hose); + disp_name = "Grackle (MPC106)"; + } else if (strcmp(dev->name, "bandit") == 0) { + setup_bandit(hose, addr); + disp_name = "Bandit"; + } else if (strcmp(dev->name, "chaos") == 0) { + setup_chaos(hose, addr); + disp_name = "Chaos"; + primary = 0; + } + printk(KERN_INFO "Found %s PCI host bridge at 0x%08x. Firmware bus number: %d->%d\n", + disp_name, addr->address, hose->first_busno, hose->last_busno); + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); + + return 0; +} + +static void __init +pcibios_fixup_OF_interrupts(void) +{ + struct pci_dev* dev = NULL; + + /* + * Open Firmware often doesn't initialize the + * PCI_INTERRUPT_LINE config register properly, so we + * should find the device node and apply the interrupt + * obtained from the OF device-tree + */ + for_each_pci_dev(dev) { + struct device_node *node; + node = pci_device_to_OF_node(dev); + /* this is the node, see if it has interrupts */ + if (node && node->n_intrs > 0) + dev->irq = node->intrs[0].line; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + +void __init +pmac_pcibios_fixup(void) +{ + /* Fixup interrupts according to OF tree */ + pcibios_fixup_OF_interrupts(); +} + +int +pmac_pci_enable_device_hook(struct pci_dev *dev, int initial) +{ + struct device_node* node; + int updatecfg = 0; + int uninorth_child; + + node = pci_device_to_OF_node(dev); + + /* We don't want to enable USB controllers absent from the OF tree + * (iBook second controller) + */ + if (dev->vendor == PCI_VENDOR_ID_APPLE + && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) + && !node) { + printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", + pci_name(dev)); + return -EINVAL; + } + + if (!node) + return 0; + + uninorth_child = node->parent && + device_is_compatible(node->parent, "uni-north"); + + /* Firewire & GMAC were disabled after PCI probe, the driver is + * claiming them, we must re-enable them now. + */ + if (uninorth_child && !strcmp(node->name, "firewire") && + (device_is_compatible(node, "pci106b,18") || + device_is_compatible(node, "pci106b,30") || + device_is_compatible(node, "pci11c1,5811"))) { + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1); + pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1); + updatecfg = 1; + } + if (uninorth_child && !strcmp(node->name, "ethernet") && + device_is_compatible(node, "gmac")) { + pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1); + updatecfg = 1; + } + + if (updatecfg) { + u16 cmd; + + /* + * Make sure PCI is correctly configured + * + * We use old pci_bios versions of the function since, by + * default, gmac is not powered up, and so will be absent + * from the kernel initial PCI lookup. + * + * Should be replaced by 2.4 new PCI mechanisms and really + * register the device. + */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; + pci_write_config_word(dev, PCI_COMMAND, cmd); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16); + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size); + } + + return 0; +} + +/* We power down some devices after they have been probed. They'll + * be powered back on later on + */ +void __init +pmac_pcibios_after_init(void) +{ + struct device_node* nd; + +#ifdef CONFIG_BLK_DEV_IDE + struct pci_dev *dev = NULL; + + /* OF fails to initialize IDE controllers on macs + * (and maybe other machines) + * + * Ideally, this should be moved to the IDE layer, but we need + * to check specifically with Andre Hedrick how to do it cleanly + * since the common IDE code seem to care about the fact that the + * BIOS may have disabled a controller. + * + * -- BenH + */ + for_each_pci_dev(dev) { + if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE) + pci_enable_device(dev); + } +#endif /* CONFIG_BLK_DEV_IDE */ + + nd = find_devices("firewire"); + while (nd) { + if (nd->parent && (device_is_compatible(nd, "pci106b,18") || + device_is_compatible(nd, "pci106b,30") || + device_is_compatible(nd, "pci11c1,5811")) + && device_is_compatible(nd->parent, "uni-north")) { + pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0); + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); + } + nd = nd->next; + } + nd = find_devices("ethernet"); + while (nd) { + if (nd->parent && device_is_compatible(nd, "gmac") + && device_is_compatible(nd->parent, "uni-north")) + pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); + nd = nd->next; + } +} + +#ifdef CONFIG_PPC64 +static void __init pmac_fixup_phb_resources(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; + hose->io_resource.start += offset; + hose->io_resource.end += offset; + printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", + hose->global_number, + hose->io_resource.start, hose->io_resource.end); + } +} + +void __init pmac_pci_init(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + /* Probe root PCI hosts, that is on U3 the AGP host and the + * HyperTransport host. That one is actually "kept" around + * and actually added last as it's resource management relies + * on the AGP resources to have been setup first + */ + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Now setup the HyperTransport host if we found any + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + /* Fixup the IO resources on our host bridges as the common code + * does it only for childs of the host bridges + */ + pmac_fixup_phb_resources(); + + /* Setup the linkage between OF nodes and PHBs */ + pci_devs_phb_init(); + + /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We + * assume there is no P2P bridge on the AGP bus, which should be a + * safe assumptions hopefully. + */ + if (u3_agp) { + struct device_node *np = u3_agp->arch_data; + PCI_DN(np)->busno = 0xf0; + for (np = np->child; np; np = np->sibling) + PCI_DN(np)->busno = 0xf0; + } + + pmac_check_ht_link(); + + /* Tell pci.c to not use the common resource allocation mecanism */ + pci_probe_only = 1; + + /* Allow all IO */ + io_page_mask = -1; +} +#endif + +#ifdef CONFIG_PPC32 +void pmac_pci_fixup_cardbus(struct pci_dev* dev) +{ + if (_machine != _MACH_Pmac) + return; + /* + * Fix the interrupt routing on the various cardbus bridges + * used on powerbooks + */ + if (dev->vendor != PCI_VENDOR_ID_TI) + return; + if (dev->device == PCI_DEVICE_ID_TI_1130 || + dev->device == PCI_DEVICE_ID_TI_1131) { + u8 val; + /* Enable PCI interrupt */ + if (pci_read_config_byte(dev, 0x91, &val) == 0) + pci_write_config_byte(dev, 0x91, val | 0x30); + /* Disable ISA interrupt mode */ + if (pci_read_config_byte(dev, 0x92, &val) == 0) + pci_write_config_byte(dev, 0x92, val & ~0x06); + } + if (dev->device == PCI_DEVICE_ID_TI_1210 || + dev->device == PCI_DEVICE_ID_TI_1211 || + dev->device == PCI_DEVICE_ID_TI_1410 || + dev->device == PCI_DEVICE_ID_TI_1510) { + u8 val; + /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA + signal out the MFUNC0 pin */ + if (pci_read_config_byte(dev, 0x8c, &val) == 0) + pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2); + /* Disable ISA interrupt mode */ + if (pci_read_config_byte(dev, 0x92, &val) == 0) + pci_write_config_byte(dev, 0x92, val & ~0x06); + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus); + +void pmac_pci_fixup_pciata(struct pci_dev* dev) +{ + u8 progif = 0; + + /* + * On PowerMacs, we try to switch any PCI ATA controller to + * fully native mode + */ + if (_machine != _MACH_Pmac) + return; + /* Some controllers don't have the class IDE */ + if (dev->vendor == PCI_VENDOR_ID_PROMISE) + switch(dev->device) { + case PCI_DEVICE_ID_PROMISE_20246: + case PCI_DEVICE_ID_PROMISE_20262: + case PCI_DEVICE_ID_PROMISE_20263: + case PCI_DEVICE_ID_PROMISE_20265: + case PCI_DEVICE_ID_PROMISE_20267: + case PCI_DEVICE_ID_PROMISE_20268: + case PCI_DEVICE_ID_PROMISE_20269: + case PCI_DEVICE_ID_PROMISE_20270: + case PCI_DEVICE_ID_PROMISE_20271: + case PCI_DEVICE_ID_PROMISE_20275: + case PCI_DEVICE_ID_PROMISE_20276: + case PCI_DEVICE_ID_PROMISE_20277: + goto good; + } + /* Others, check PCI class */ + if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + good: + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 5) != 5) { + printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev)); + (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); + if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || + (progif & 5) != 5) + printk(KERN_ERR "Rewrite of PROGIF failed !\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); +#endif + +/* + * Disable second function on K2-SATA, it's broken + * and disable IO BARs on first one + */ +static void fixup_k2_sata(struct pci_dev* dev) +{ + int i; + u16 cmd; + + if (PCI_FUNC(dev->devfn) > 0) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + for (i = 0; i < 6; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + } + } else { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~PCI_COMMAND_IO; + pci_write_config_word(dev, PCI_COMMAND, cmd); + for (i = 0; i < 5; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); + diff --git a/arch/powerpc/platforms/powermac/pmac_pic.c b/arch/powerpc/platforms/powermac/pmac_pic.c new file mode 100644 index 00000000000..bf3e1899a4c --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_pic.c @@ -0,0 +1,655 @@ +/* + * Support for the interrupt controllers found on Power Macintosh, + * currently Apple's "Grand Central" interrupt controller in all + * it's incarnations. OpenPIC support used on newer machines is + * in a separate file + * + * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) + * + * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> +#include <linux/adb.h> +#include <linux/pmu.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/time.h> +#include <asm/open_pic.h> +#include <asm/xmon.h> +#include <asm/pmac_feature.h> +#include <asm/mpic.h> + +#include "pmac_pic.h" + +/* + * XXX this should be in xmon.h, but putting it there means xmon.h + * has to include <linux/interrupt.h> (to get irqreturn_t), which + * causes all sorts of problems. -- paulus + */ +extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); + +struct pmac_irq_hw { + unsigned int event; + unsigned int enable; + unsigned int ack; + unsigned int level; +}; + +/* Default addresses */ +static volatile struct pmac_irq_hw *pmac_irq_hw[4] = { + (struct pmac_irq_hw *) 0xf3000020, + (struct pmac_irq_hw *) 0xf3000010, + (struct pmac_irq_hw *) 0xf4000020, + (struct pmac_irq_hw *) 0xf4000010, +}; + +#define GC_LEVEL_MASK 0x3ff00000 +#define OHARE_LEVEL_MASK 0x1ff00000 +#define HEATHROW_LEVEL_MASK 0x1ff00000 + +static int max_irqs; +static int max_real_irqs; +static u32 level_mask[4]; + +static DEFINE_SPINLOCK(pmac_pic_lock); + + +#define GATWICK_IRQ_POOL_SIZE 10 +static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; + +/* + * Mark an irq as "lost". This is only used on the pmac + * since it can lose interrupts (see pmac_set_irq_mask). + * -- Cort + */ +void +__set_lost(unsigned long irq_nr, int nokick) +{ + if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) { + atomic_inc(&ppc_n_lost_interrupts); + if (!nokick) + set_dec(1); + } +} + +static void +pmac_mask_and_ack_irq(unsigned int irq_nr) +{ + unsigned long bit = 1UL << (irq_nr & 0x1f); + int i = irq_nr >> 5; + unsigned long flags; + + if ((unsigned)irq_nr >= max_irqs) + return; + + clear_bit(irq_nr, ppc_cached_irq_mask); + if (test_and_clear_bit(irq_nr, ppc_lost_interrupts)) + atomic_dec(&ppc_n_lost_interrupts); + spin_lock_irqsave(&pmac_pic_lock, flags); + out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); + out_le32(&pmac_irq_hw[i]->ack, bit); + do { + /* make sure ack gets to controller before we enable + interrupts */ + mb(); + } while((in_le32(&pmac_irq_hw[i]->enable) & bit) + != (ppc_cached_irq_mask[i] & bit)); + spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) +{ + unsigned long bit = 1UL << (irq_nr & 0x1f); + int i = irq_nr >> 5; + unsigned long flags; + + if ((unsigned)irq_nr >= max_irqs) + return; + + spin_lock_irqsave(&pmac_pic_lock, flags); + /* enable unmasked interrupts */ + out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); + + do { + /* make sure mask gets to controller before we + return to user */ + mb(); + } while((in_le32(&pmac_irq_hw[i]->enable) & bit) + != (ppc_cached_irq_mask[i] & bit)); + + /* + * Unfortunately, setting the bit in the enable register + * when the device interrupt is already on *doesn't* set + * the bit in the flag register or request another interrupt. + */ + if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level)) + __set_lost((ulong)irq_nr, nokicklost); + spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +/* When an irq gets requested for the first client, if it's an + * edge interrupt, we clear any previous one on the controller + */ +static unsigned int pmac_startup_irq(unsigned int irq_nr) +{ + unsigned long bit = 1UL << (irq_nr & 0x1f); + int i = irq_nr >> 5; + + if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0) + out_le32(&pmac_irq_hw[i]->ack, bit); + set_bit(irq_nr, ppc_cached_irq_mask); + pmac_set_irq_mask(irq_nr, 0); + + return 0; +} + +static void pmac_mask_irq(unsigned int irq_nr) +{ + clear_bit(irq_nr, ppc_cached_irq_mask); + pmac_set_irq_mask(irq_nr, 0); + mb(); +} + +static void pmac_unmask_irq(unsigned int irq_nr) +{ + set_bit(irq_nr, ppc_cached_irq_mask); + pmac_set_irq_mask(irq_nr, 0); +} + +static void pmac_end_irq(unsigned int irq_nr) +{ + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) + && irq_desc[irq_nr].action) { + set_bit(irq_nr, ppc_cached_irq_mask); + pmac_set_irq_mask(irq_nr, 1); + } +} + + +struct hw_interrupt_type pmac_pic = { + .typename = " PMAC-PIC ", + .startup = pmac_startup_irq, + .enable = pmac_unmask_irq, + .disable = pmac_mask_irq, + .ack = pmac_mask_and_ack_irq, + .end = pmac_end_irq, +}; + +struct hw_interrupt_type gatwick_pic = { + .typename = " GATWICK ", + .startup = pmac_startup_irq, + .enable = pmac_unmask_irq, + .disable = pmac_mask_irq, + .ack = pmac_mask_and_ack_irq, + .end = pmac_end_irq, +}; + +static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) +{ + int irq, bits; + + for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { + int i = irq >> 5; + bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; + /* We must read level interrupts from the level register */ + bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); + bits &= ppc_cached_irq_mask[i]; + if (bits == 0) + continue; + irq += __ilog2(bits); + __do_IRQ(irq, regs); + return IRQ_HANDLED; + } + printk("gatwick irq not from gatwick pic\n"); + return IRQ_NONE; +} + +int +pmac_get_irq(struct pt_regs *regs) +{ + int irq; + unsigned long bits = 0; + +#ifdef CONFIG_SMP + void psurge_smp_message_recv(struct pt_regs *); + + /* IPI's are a hack on the powersurge -- Cort */ + if ( smp_processor_id() != 0 ) { + psurge_smp_message_recv(regs); + return -2; /* ignore, already handled */ + } +#endif /* CONFIG_SMP */ + for (irq = max_real_irqs; (irq -= 32) >= 0; ) { + int i = irq >> 5; + bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; + /* We must read level interrupts from the level register */ + bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); + bits &= ppc_cached_irq_mask[i]; + if (bits == 0) + continue; + irq += __ilog2(bits); + break; + } + + return irq; +} + +/* This routine will fix some missing interrupt values in the device tree + * on the gatwick mac-io controller used by some PowerBooks + */ +static void __init +pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) +{ + struct device_node *node; + int count; + + memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool)); + node = gw->child; + count = 0; + while(node) + { + /* Fix SCC */ + if (strcasecmp(node->name, "escc") == 0) + if (node->child) { + if (node->child->n_intrs < 3) { + node->child->intrs = &gatwick_int_pool[count]; + count += 3; + } + node->child->n_intrs = 3; + node->child->intrs[0].line = 15+irq_base; + node->child->intrs[1].line = 4+irq_base; + node->child->intrs[2].line = 5+irq_base; + printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n", + node->child->intrs[0].line, + node->child->intrs[1].line, + node->child->intrs[2].line); + } + /* Fix media-bay & left SWIM */ + if (strcasecmp(node->name, "media-bay") == 0) { + struct device_node* ya_node; + + if (node->n_intrs == 0) + node->intrs = &gatwick_int_pool[count++]; + node->n_intrs = 1; + node->intrs[0].line = 29+irq_base; + printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n", + node->intrs[0].line); + + ya_node = node->child; + while(ya_node) + { + if (strcasecmp(ya_node->name, "floppy") == 0) { + if (ya_node->n_intrs < 2) { + ya_node->intrs = &gatwick_int_pool[count]; + count += 2; + } + ya_node->n_intrs = 2; + ya_node->intrs[0].line = 19+irq_base; + ya_node->intrs[1].line = 1+irq_base; + printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n", + ya_node->intrs[0].line, ya_node->intrs[1].line); + } + if (strcasecmp(ya_node->name, "ata4") == 0) { + if (ya_node->n_intrs < 2) { + ya_node->intrs = &gatwick_int_pool[count]; + count += 2; + } + ya_node->n_intrs = 2; + ya_node->intrs[0].line = 14+irq_base; + ya_node->intrs[1].line = 3+irq_base; + printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n", + ya_node->intrs[0].line, ya_node->intrs[1].line); + } + ya_node = ya_node->sibling; + } + } + node = node->sibling; + } + if (count > 10) { + printk("WARNING !! Gatwick interrupt pool overflow\n"); + printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE); + printk(" requested = %d\n", count); + } +} + +/* + * The PowerBook 3400/2400/3500 can have a combo ethernet/modem + * card which includes an ohare chip that acts as a second interrupt + * controller. If we find this second ohare, set it up and fix the + * interrupt value in the device tree for the ethernet chip. + */ +static int __init enable_second_ohare(void) +{ + unsigned char bus, devfn; + unsigned short cmd; + unsigned long addr; + struct device_node *irqctrler = find_devices("pci106b,7"); + struct device_node *ether; + + if (irqctrler == NULL || irqctrler->n_addrs <= 0) + return -1; + addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); + pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20); + max_irqs = 64; + if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) { + struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler); + if (!hose) + printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); + else { + early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd &= ~PCI_COMMAND_IO; + early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); + } + } + + /* Fix interrupt for the modem/ethernet combo controller. The number + in the device tree (27) is bogus (correct for the ethernet-only + board but not the combo ethernet/modem board). + The real interrupt is 28 on the second controller -> 28+32 = 60. + */ + ether = find_devices("pci1011,14"); + if (ether && ether->n_intrs > 0) { + ether->intrs[0].line = 60; + printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n", + ether->intrs[0].line); + } + + /* Return the interrupt number of the cascade */ + return irqctrler->intrs[0].line; +} + +static int pmac_u3_cascade(struct pt_regs *regs, void *data) +{ + return mpic_get_one_irq((struct mpic *)data, regs); +} + +#ifdef CONFIG_XMON +static struct irqaction xmon_action = { + .handler = xmon_irq, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = "NMI - XMON" +}; +#endif + +static struct irqaction gatwick_cascade_action = { + .handler = gatwick_action, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + +void __init pmac_pic_init(void) +{ + int i; + struct device_node *irqctrler = NULL; + struct device_node *irqctrler2 = NULL; + struct device_node *np; + unsigned long addr; + int irq_cascade = -1; + struct mpic *mpic1, *mpic2; + + /* We first try to detect Apple's new Core99 chipset, since mac-io + * is quite different on those machines and contains an IBM MPIC2. + */ + np = find_type_devices("open-pic"); + while (np) { + if (np->parent && !strcmp(np->parent->name, "u3")) + irqctrler2 = np; + else + irqctrler = np; + np = np->next; + } + if (irqctrler != NULL && irqctrler->n_addrs > 0) { + unsigned char senses[128]; + + printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n", + (unsigned int)irqctrler->addrs[0].address); + + prom_get_irq_senses(senses, 0, 128); + mpic1 = mpic_alloc(irqctrler->addrs[0].address, + MPIC_PRIMARY | MPIC_WANTS_RESET, + 0, 0, 128, 256, senses, 128, " K2-MPIC "); + BUG_ON(mpic1 == NULL); + mpic_init(mpic1); + + if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 && + irqctrler2->n_addrs > 0) { + printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n", + (u32)irqctrler2->addrs[0].address, + irqctrler2->intrs[0].line); + + pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0); + prom_get_irq_senses(senses, 128, 128 + 128); + + /* We don't need to set MPIC_BROKEN_U3 here since we don't have + * hypertransport interrupts routed to it + */ + mpic2 = mpic_alloc(irqctrler2->addrs[0].address, + MPIC_BIG_ENDIAN | MPIC_WANTS_RESET, + 0, 128, 128, 0, senses, 128, " U3-MPIC "); + BUG_ON(mpic2 == NULL); + mpic_init(mpic2); + mpic_setup_cascade(irqctrler2->intrs[0].line, + pmac_u3_cascade, mpic2); + } + } + + /* Get the level/edge settings, assume if it's not + * a Grand Central nor an OHare, then it's an Heathrow + * (or Paddington). + */ + if (find_devices("gc")) + level_mask[0] = GC_LEVEL_MASK; + else if (find_devices("ohare")) { + level_mask[0] = OHARE_LEVEL_MASK; + /* We might have a second cascaded ohare */ + level_mask[1] = OHARE_LEVEL_MASK; + } else { + level_mask[0] = HEATHROW_LEVEL_MASK; + level_mask[1] = 0; + /* We might have a second cascaded heathrow */ + level_mask[2] = HEATHROW_LEVEL_MASK; + level_mask[3] = 0; + } + + /* + * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts, + * 1998 G3 Series PowerBooks have 128, + * other powermacs have 32. + * The combo ethernet/modem card for the Powerstar powerbooks + * (2400/3400/3500, ohare based) has a second ohare chip + * effectively making a total of 64. + */ + max_irqs = max_real_irqs = 32; + irqctrler = find_devices("mac-io"); + if (irqctrler) + { + max_real_irqs = 64; + if (irqctrler->next) + max_irqs = 128; + else + max_irqs = 64; + } + for ( i = 0; i < max_real_irqs ; i++ ) + irq_desc[i].handler = &pmac_pic; + + /* get addresses of first controller */ + if (irqctrler) { + if (irqctrler->n_addrs > 0) { + addr = (unsigned long) + ioremap(irqctrler->addrs[0].address, 0x40); + for (i = 0; i < 2; ++i) + pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) + (addr + (2 - i) * 0x10); + } + + /* get addresses of second controller */ + irqctrler = irqctrler->next; + if (irqctrler && irqctrler->n_addrs > 0) { + addr = (unsigned long) + ioremap(irqctrler->addrs[0].address, 0x40); + for (i = 2; i < 4; ++i) + pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) + (addr + (4 - i) * 0x10); + irq_cascade = irqctrler->intrs[0].line; + if (device_is_compatible(irqctrler, "gatwick")) + pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs); + } + } else { + /* older powermacs have a GC (grand central) or ohare at + f3000000, with interrupt control registers at f3000020. */ + addr = (unsigned long) ioremap(0xf3000000, 0x40); + pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20); + } + + /* PowerBooks 3400 and 3500 can have a second controller in a second + ohare chip, on the combo ethernet/modem card */ + if (machine_is_compatible("AAPL,3400/2400") + || machine_is_compatible("AAPL,3500")) + irq_cascade = enable_second_ohare(); + + /* disable all interrupts in all controllers */ + for (i = 0; i * 32 < max_irqs; ++i) + out_le32(&pmac_irq_hw[i]->enable, 0); + /* mark level interrupts */ + for (i = 0; i < max_irqs; i++) + if (level_mask[i >> 5] & (1UL << (i & 0x1f))) + irq_desc[i].status = IRQ_LEVEL; + + /* get interrupt line of secondary interrupt controller */ + if (irq_cascade >= 0) { + printk(KERN_INFO "irq: secondary controller on irq %d\n", + (int)irq_cascade); + for ( i = max_real_irqs ; i < max_irqs ; i++ ) + irq_desc[i].handler = &gatwick_pic; + setup_irq(irq_cascade, &gatwick_cascade_action); + } + printk("System has %d possible interrupts\n", max_irqs); + if (max_irqs != max_real_irqs) + printk(KERN_DEBUG "%d interrupts on main controller\n", + max_real_irqs); + +#ifdef CONFIG_XMON + setup_irq(20, &xmon_action); +#endif /* CONFIG_XMON */ +} + +#ifdef CONFIG_PM +/* + * These procedures are used in implementing sleep on the powerbooks. + * sleep_save_intrs() saves the states of all interrupt enables + * and disables all interrupts except for the nominated one. + * sleep_restore_intrs() restores the states of all interrupt enables. + */ +unsigned long sleep_save_mask[2]; + +/* This used to be passed by the PMU driver but that link got + * broken with the new driver model. We use this tweak for now... + */ +static int pmacpic_find_viaint(void) +{ + int viaint = -1; + +#ifdef CONFIG_ADB_PMU + struct device_node *np; + + if (pmu_get_model() != PMU_OHARE_BASED) + goto not_found; + np = of_find_node_by_name(NULL, "via-pmu"); + if (np == NULL) + goto not_found; + viaint = np->intrs[0].line; +#endif /* CONFIG_ADB_PMU */ + +not_found: + return viaint; +} + +static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) +{ + int viaint = pmacpic_find_viaint(); + + sleep_save_mask[0] = ppc_cached_irq_mask[0]; + sleep_save_mask[1] = ppc_cached_irq_mask[1]; + ppc_cached_irq_mask[0] = 0; + ppc_cached_irq_mask[1] = 0; + if (viaint > 0) + set_bit(viaint, ppc_cached_irq_mask); + out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]); + if (max_real_irqs > 32) + out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]); + (void)in_le32(&pmac_irq_hw[0]->event); + /* make sure mask gets to controller before we return to caller */ + mb(); + (void)in_le32(&pmac_irq_hw[0]->enable); + + return 0; +} + +static int pmacpic_resume(struct sys_device *sysdev) +{ + int i; + + out_le32(&pmac_irq_hw[0]->enable, 0); + if (max_real_irqs > 32) + out_le32(&pmac_irq_hw[1]->enable, 0); + mb(); + for (i = 0; i < max_real_irqs; ++i) + if (test_bit(i, sleep_save_mask)) + pmac_unmask_irq(i); + + return 0; +} + +#endif /* CONFIG_PM */ + +static struct sysdev_class pmacpic_sysclass = { + set_kset_name("pmac_pic"), +}; + +static struct sys_device device_pmacpic = { + .id = 0, + .cls = &pmacpic_sysclass, +}; + +static struct sysdev_driver driver_pmacpic = { +#ifdef CONFIG_PM + .suspend = &pmacpic_suspend, + .resume = &pmacpic_resume, +#endif /* CONFIG_PM */ +}; + +static int __init init_pmacpic_sysfs(void) +{ + if (max_irqs == 0) + return -ENODEV; + + printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); + sysdev_class_register(&pmacpic_sysclass); + sysdev_register(&device_pmacpic); + sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic); + return 0; +} + +subsys_initcall(init_pmacpic_sysfs); + diff --git a/arch/powerpc/platforms/powermac/pmac_pic.h b/arch/powerpc/platforms/powermac/pmac_pic.h new file mode 100644 index 00000000000..664103dfeef --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_pic.h @@ -0,0 +1,11 @@ +#ifndef __PPC_PLATFORMS_PMAC_PIC_H +#define __PPC_PLATFORMS_PMAC_PIC_H + +#include <linux/irq.h> + +extern struct hw_interrupt_type pmac_pic; + +void pmac_pic_init(void); +int pmac_get_irq(struct pt_regs *regs); + +#endif /* __PPC_PLATFORMS_PMAC_PIC_H */ diff --git a/arch/powerpc/platforms/powermac/pmac_setup.c b/arch/powerpc/platforms/powermac/pmac_setup.c new file mode 100644 index 00000000000..dbc921a084c --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_setup.c @@ -0,0 +1,662 @@ +/* + * arch/ppc/platforms/setup.c + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Adapted for Power Macintosh by Paul Mackerras + * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) + * + * Derived from "arch/alpha/kernel/setup.c" + * Copyright (C) 1995 Linus Torvalds + * + * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +/* + * bootup setup stuff.. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/tty.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/major.h> +#include <linux/initrd.h> +#include <linux/vt_kern.h> +#include <linux/console.h> +#include <linux/ide.h> +#include <linux/pci.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/bitops.h> +#include <linux/suspend.h> + +#include <asm/reg.h> +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/ohare.h> +#include <asm/mediabay.h> +#include <asm/machdep.h> +#include <asm/dma.h> +#include <asm/bootx.h> +#include <asm/cputable.h> +#include <asm/btext.h> +#include <asm/pmac_feature.h> +#include <asm/time.h> +#include <asm/of_device.h> +#include <asm/mmu_context.h> + +#include "pmac_pic.h" + +#undef SHOW_GATWICK_IRQS + +extern long pmac_time_init(void); +extern unsigned long pmac_get_rtc_time(void); +extern int pmac_set_rtc_time(unsigned long nowtime); +extern void pmac_read_rtc_time(void); +extern void pmac_calibrate_decr(void); +extern void pmac_pcibios_fixup(void); +extern void pmac_find_bridges(void); +extern unsigned long pmac_ide_get_base(int index); +extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, + unsigned long data_port, unsigned long ctrl_port, int *irq); + +extern void pmac_nvram_update(void); +extern unsigned char pmac_nvram_read_byte(int addr); +extern void pmac_nvram_write_byte(int addr, unsigned char val); +extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial); +extern void pmac_pcibios_after_init(void); +extern int of_show_percpuinfo(struct seq_file *m, int i); + +unsigned char drive_info; + +int ppc_override_l2cr = 0; +int ppc_override_l2cr_value; +int has_l2cache = 0; + +static int current_root_goodness = -1; + +extern int pmac_newworld; + +#define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */ + +extern void zs_kgdb_hook(int tty_num); +static void ohare_init(void); +#ifdef CONFIG_BOOTX_TEXT +static void pmac_progress(char *s, unsigned short hex); +#endif + +sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; + +#ifdef CONFIG_SMP +extern struct smp_ops_t psurge_smp_ops; +extern struct smp_ops_t core99_smp_ops; +#endif /* CONFIG_SMP */ + +static int +pmac_show_cpuinfo(struct seq_file *m) +{ + struct device_node *np; + char *pp; + int plen; + int mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO, + NULL, PMAC_MB_INFO_MODEL, 0); + unsigned int mbflags = (unsigned int)pmac_call_feature(PMAC_FTR_GET_MB_INFO, + NULL, PMAC_MB_INFO_FLAGS, 0); + char* mbname; + + if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME, (int)&mbname) != 0) + mbname = "Unknown"; + + /* find motherboard type */ + seq_printf(m, "machine\t\t: "); + np = find_devices("device-tree"); + if (np != NULL) { + pp = (char *) get_property(np, "model", NULL); + if (pp != NULL) + seq_printf(m, "%s\n", pp); + else + seq_printf(m, "PowerMac\n"); + pp = (char *) get_property(np, "compatible", &plen); + if (pp != NULL) { + seq_printf(m, "motherboard\t:"); + while (plen > 0) { + int l = strlen(pp) + 1; + seq_printf(m, " %s", pp); + plen -= l; + pp += l; + } + seq_printf(m, "\n"); + } + } else + seq_printf(m, "PowerMac\n"); + + /* print parsed model */ + seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname); + seq_printf(m, "pmac flags\t: %08x\n", mbflags); + + /* find l2 cache info */ + np = find_devices("l2-cache"); + if (np == 0) + np = find_type_devices("cache"); + if (np != 0) { + unsigned int *ic = (unsigned int *) + get_property(np, "i-cache-size", NULL); + unsigned int *dc = (unsigned int *) + get_property(np, "d-cache-size", NULL); + seq_printf(m, "L2 cache\t:"); + has_l2cache = 1; + if (get_property(np, "cache-unified", NULL) != 0 && dc) { + seq_printf(m, " %dK unified", *dc / 1024); + } else { + if (ic) + seq_printf(m, " %dK instruction", *ic / 1024); + if (dc) + seq_printf(m, "%s %dK data", + (ic? " +": ""), *dc / 1024); + } + pp = get_property(np, "ram-type", NULL); + if (pp) + seq_printf(m, " %s", pp); + seq_printf(m, "\n"); + } + + /* find ram info */ + np = find_devices("memory"); + if (np != 0) { + int n; + struct reg_property *reg = (struct reg_property *) + get_property(np, "reg", &n); + + if (reg != 0) { + unsigned long total = 0; + + for (n /= sizeof(struct reg_property); n > 0; --n) + total += (reg++)->size; + seq_printf(m, "memory\t\t: %luMB\n", total >> 20); + } + } + + /* Checks "l2cr-value" property in the registry */ + np = find_devices("cpus"); + if (np == 0) + np = find_type_devices("cpu"); + if (np != 0) { + unsigned int *l2cr = (unsigned int *) + get_property(np, "l2cr-value", NULL); + if (l2cr != 0) { + seq_printf(m, "l2cr override\t: 0x%x\n", *l2cr); + } + } + + /* Indicate newworld/oldworld */ + seq_printf(m, "pmac-generation\t: %s\n", + pmac_newworld ? "NewWorld" : "OldWorld"); + + + return 0; +} + +static int +pmac_show_percpuinfo(struct seq_file *m, int i) +{ +#ifdef CONFIG_CPU_FREQ_PMAC + extern unsigned int pmac_get_one_cpufreq(int i); + unsigned int freq = pmac_get_one_cpufreq(i); + if (freq != 0) { + seq_printf(m, "clock\t\t: %dMHz\n", freq/1000); + return 0; + } +#endif /* CONFIG_CPU_FREQ_PMAC */ + return of_show_percpuinfo(m, i); +} + +static volatile u32 *sysctrl_regs; + +void __init +pmac_setup_arch(void) +{ + struct device_node *cpu; + int *fp; + unsigned long pvr; + + pvr = PVR_VER(mfspr(SPRN_PVR)); + + /* Set loops_per_jiffy to a half-way reasonable value, + for use until calibrate_delay gets called. */ + cpu = find_type_devices("cpu"); + if (cpu != 0) { + fp = (int *) get_property(cpu, "clock-frequency", NULL); + if (fp != 0) { + if (pvr == 4 || pvr >= 8) + /* 604, G3, G4 etc. */ + loops_per_jiffy = *fp / HZ; + else + /* 601, 603, etc. */ + loops_per_jiffy = *fp / (2*HZ); + } else + loops_per_jiffy = 50000000 / HZ; + } + + /* this area has the CPU identification register + and some registers used by smp boards */ + sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000); + ohare_init(); + + /* Lookup PCI hosts */ + pmac_find_bridges(); + + /* Checks "l2cr-value" property in the registry */ + if (cpu_has_feature(CPU_FTR_L2CR)) { + struct device_node *np = find_devices("cpus"); + if (np == 0) + np = find_type_devices("cpu"); + if (np != 0) { + unsigned int *l2cr = (unsigned int *) + get_property(np, "l2cr-value", NULL); + if (l2cr != 0) { + ppc_override_l2cr = 1; + ppc_override_l2cr_value = *l2cr; + _set_L2CR(0); + _set_L2CR(ppc_override_l2cr_value); + } + } + } + + if (ppc_override_l2cr) + printk(KERN_INFO "L2CR overriden (0x%x), backside cache is %s\n", + ppc_override_l2cr_value, (ppc_override_l2cr_value & 0x80000000) + ? "enabled" : "disabled"); + +#ifdef CONFIG_KGDB + zs_kgdb_hook(0); +#endif + +#ifdef CONFIG_ADB_CUDA + find_via_cuda(); +#else + if (find_devices("via-cuda")) { + printk("WARNING ! Your machine is Cuda based but your kernel\n"); + printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n"); + } +#endif +#ifdef CONFIG_ADB_PMU + find_via_pmu(); +#else + if (find_devices("via-pmu")) { + printk("WARNING ! Your machine is PMU based but your kernel\n"); + printk(" wasn't compiled with CONFIG_ADB_PMU option !\n"); + } +#endif +#ifdef CONFIG_NVRAM + pmac_nvram_init(); +#endif +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = DEFAULT_ROOT_DEVICE; + +#ifdef CONFIG_SMP + /* Check for Core99 */ + if (find_devices("uni-n") || find_devices("u3")) + ppc_md.smp_ops = &core99_smp_ops; + else + ppc_md.smp_ops = &psurge_smp_ops; +#endif /* CONFIG_SMP */ + + pci_create_OF_bus_map(); +} + +static void __init ohare_init(void) +{ + /* + * Turn on the L2 cache. + * We assume that we have a PSX memory controller iff + * we have an ohare I/O controller. + */ + if (find_devices("ohare") != NULL) { + if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) { + if (sysctrl_regs[4] & 0x10) + sysctrl_regs[4] |= 0x04000020; + else + sysctrl_regs[4] |= 0x04000000; + if(has_l2cache) + printk(KERN_INFO "Level 2 cache enabled\n"); + } + } +} + +extern char *bootpath; +extern char *bootdevice; +void *boot_host; +int boot_target; +int boot_part; +extern dev_t boot_dev; + +#ifdef CONFIG_SCSI +void __init +note_scsi_host(struct device_node *node, void *host) +{ + int l; + char *p; + + l = strlen(node->full_name); + if (bootpath != NULL && bootdevice != NULL + && strncmp(node->full_name, bootdevice, l) == 0 + && (bootdevice[l] == '/' || bootdevice[l] == 0)) { + boot_host = host; + /* + * There's a bug in OF 1.0.5. (Why am I not surprised.) + * If you pass a path like scsi/sd@1:0 to canon, it returns + * something like /bandit@F2000000/gc@10/53c94@10000/sd@0,0 + * That is, the scsi target number doesn't get preserved. + * So we pick the target number out of bootpath and use that. + */ + p = strstr(bootpath, "/sd@"); + if (p != NULL) { + p += 4; + boot_target = simple_strtoul(p, NULL, 10); + p = strchr(p, ':'); + if (p != NULL) + boot_part = simple_strtoul(p + 1, NULL, 10); + } + } +} +#endif + +#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC) +static dev_t __init +find_ide_boot(void) +{ + char *p; + int n; + dev_t __init pmac_find_ide_boot(char *bootdevice, int n); + + if (bootdevice == NULL) + return 0; + p = strrchr(bootdevice, '/'); + if (p == NULL) + return 0; + n = p - bootdevice; + + return pmac_find_ide_boot(bootdevice, n); +} +#endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */ + +static void __init +find_boot_device(void) +{ +#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC) + boot_dev = find_ide_boot(); +#endif +} + +static int initializing = 1; +/* TODO: Merge the suspend-to-ram with the common code !!! + * currently, this is a stub implementation for suspend-to-disk + * only + */ + +#ifdef CONFIG_SOFTWARE_SUSPEND + +static int pmac_pm_prepare(suspend_state_t state) +{ + printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); + + return 0; +} + +static int pmac_pm_enter(suspend_state_t state) +{ + printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); + + /* Giveup the lazy FPU & vec so we don't have to back them + * up from the low level code + */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cur_cpu_spec[0]->cpu_features & CPU_FTR_ALTIVEC) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + return 0; +} + +static int pmac_pm_finish(suspend_state_t state) +{ + printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); + + /* Restore userland MMU context */ + set_context(current->active_mm->context, current->active_mm->pgd); + + return 0; +} + +static struct pm_ops pmac_pm_ops = { + .pm_disk_mode = PM_DISK_SHUTDOWN, + .prepare = pmac_pm_prepare, + .enter = pmac_pm_enter, + .finish = pmac_pm_finish, +}; + +#endif /* CONFIG_SOFTWARE_SUSPEND */ + +static int pmac_late_init(void) +{ + initializing = 0; +#ifdef CONFIG_SOFTWARE_SUSPEND + pm_set_ops(&pmac_pm_ops); +#endif /* CONFIG_SOFTWARE_SUSPEND */ + return 0; +} + +late_initcall(pmac_late_init); + +/* can't be __init - can be called whenever a disk is first accessed */ +void +note_bootable_part(dev_t dev, int part, int goodness) +{ + static int found_boot = 0; + char *p; + + if (!initializing) + return; + if ((goodness <= current_root_goodness) && + ROOT_DEV != DEFAULT_ROOT_DEVICE) + return; + p = strstr(saved_command_line, "root="); + if (p != NULL && (p == saved_command_line || p[-1] == ' ')) + return; + + if (!found_boot) { + find_boot_device(); + found_boot = 1; + } + if (!boot_dev || dev == boot_dev) { + ROOT_DEV = dev + part; + boot_dev = 0; + current_root_goodness = goodness; + } +} + +static void +pmac_restart(char *cmd) +{ +#ifdef CONFIG_ADB_CUDA + struct adb_request req; +#endif /* CONFIG_ADB_CUDA */ + + switch (sys_ctrler) { +#ifdef CONFIG_ADB_CUDA + case SYS_CTRLER_CUDA: + cuda_request(&req, NULL, 2, CUDA_PACKET, + CUDA_RESET_SYSTEM); + for (;;) + cuda_poll(); + break; +#endif /* CONFIG_ADB_CUDA */ +#ifdef CONFIG_ADB_PMU + case SYS_CTRLER_PMU: + pmu_restart(); + break; +#endif /* CONFIG_ADB_PMU */ + default: ; + } +} + +static void +pmac_power_off(void) +{ +#ifdef CONFIG_ADB_CUDA + struct adb_request req; +#endif /* CONFIG_ADB_CUDA */ + + switch (sys_ctrler) { +#ifdef CONFIG_ADB_CUDA + case SYS_CTRLER_CUDA: + cuda_request(&req, NULL, 2, CUDA_PACKET, + CUDA_POWERDOWN); + for (;;) + cuda_poll(); + break; +#endif /* CONFIG_ADB_CUDA */ +#ifdef CONFIG_ADB_PMU + case SYS_CTRLER_PMU: + pmu_shutdown(); + break; +#endif /* CONFIG_ADB_PMU */ + default: ; + } +} + +static void +pmac_halt(void) +{ + pmac_power_off(); +} + +void __init +pmac_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + /* isa_io_base gets set in pmac_find_bridges */ + isa_mem_base = PMAC_ISA_MEM_BASE; + pci_dram_offset = PMAC_PCI_DRAM_OFFSET; + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 1; + DMA_MODE_WRITE = 2; + + ppc_md.setup_arch = pmac_setup_arch; + ppc_md.show_cpuinfo = pmac_show_cpuinfo; + ppc_md.show_percpuinfo = pmac_show_percpuinfo; + ppc_md.irq_canonicalize = NULL; + ppc_md.init_IRQ = pmac_pic_init; + ppc_md.get_irq = pmac_get_irq; /* Changed later on ... */ + + ppc_md.pcibios_fixup = pmac_pcibios_fixup; + ppc_md.pcibios_enable_device_hook = pmac_pci_enable_device_hook; + ppc_md.pcibios_after_init = pmac_pcibios_after_init; + ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; + + ppc_md.restart = pmac_restart; + ppc_md.power_off = pmac_power_off; + ppc_md.halt = pmac_halt; + + ppc_md.time_init = pmac_time_init; + ppc_md.set_rtc_time = pmac_set_rtc_time; + ppc_md.get_rtc_time = pmac_get_rtc_time; + ppc_md.calibrate_decr = pmac_calibrate_decr; + + ppc_md.feature_call = pmac_do_feature_call; + +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) +#ifdef CONFIG_BLK_DEV_IDE_PMAC + ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; + ppc_ide_md.default_io_base = pmac_ide_get_base; +#endif /* CONFIG_BLK_DEV_IDE_PMAC */ +#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ + +#ifdef CONFIG_BOOTX_TEXT + ppc_md.progress = pmac_progress; +#endif /* CONFIG_BOOTX_TEXT */ + + if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0); + +} + +#ifdef CONFIG_BOOTX_TEXT +static void __init +pmac_progress(char *s, unsigned short hex) +{ + if (boot_text_mapped) { + btext_drawstring(s); + btext_drawchar('\n'); + } +} +#endif /* CONFIG_BOOTX_TEXT */ + +static int __init +pmac_declare_of_platform_devices(void) +{ + struct device_node *np; + + np = find_devices("uni-n"); + if (np) { + for (np = np->child; np != NULL; np = np->sibling) + if (strncmp(np->name, "i2c", 3) == 0) { + of_platform_device_create(np, "uni-n-i2c", + NULL); + break; + } + } + np = find_devices("u3"); + if (np) { + for (np = np->child; np != NULL; np = np->sibling) + if (strncmp(np->name, "i2c", 3) == 0) { + of_platform_device_create(np, "u3-i2c", + NULL); + break; + } + } + + np = find_devices("valkyrie"); + if (np) + of_platform_device_create(np, "valkyrie", NULL); + np = find_devices("platinum"); + if (np) + of_platform_device_create(np, "platinum", NULL); + + return 0; +} + +device_initcall(pmac_declare_of_platform_devices); diff --git a/arch/powerpc/platforms/powermac/pmac_sleep.S b/arch/powerpc/platforms/powermac/pmac_sleep.S new file mode 100644 index 00000000000..88419c77ac4 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_sleep.S @@ -0,0 +1,396 @@ +/* + * This file contains sleep low-level functions for PowerBook G3. + * Copyright (C) 1999 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * and Paul Mackerras (paulus@samba.org). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/cputable.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> + +#define MAGIC 0x4c617273 /* 'Lars' */ + +/* + * Structure for storing CPU registers on the stack. + */ +#define SL_SP 0 +#define SL_PC 4 +#define SL_MSR 8 +#define SL_SDR1 0xc +#define SL_SPRG0 0x10 /* 4 sprg's */ +#define SL_DBAT0 0x20 +#define SL_IBAT0 0x28 +#define SL_DBAT1 0x30 +#define SL_IBAT1 0x38 +#define SL_DBAT2 0x40 +#define SL_IBAT2 0x48 +#define SL_DBAT3 0x50 +#define SL_IBAT3 0x58 +#define SL_TB 0x60 +#define SL_R2 0x68 +#define SL_CR 0x6c +#define SL_R12 0x70 /* r12 to r31 */ +#define SL_SIZE (SL_R12 + 80) + + .section .text + .align 5 + +#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) + +/* This gets called by via-pmu.c late during the sleep process. + * The PMU was already send the sleep command and will shut us down + * soon. We need to save all that is needed and setup the wakeup + * vector that will be called by the ROM on wakeup + */ +_GLOBAL(low_sleep_handler) +#ifndef CONFIG_6xx + blr +#else + mflr r0 + stw r0,4(r1) + stwu r1,-SL_SIZE(r1) + mfcr r0 + stw r0,SL_CR(r1) + stw r2,SL_R2(r1) + stmw r12,SL_R12(r1) + + /* Save MSR & SDR1 */ + mfmsr r4 + stw r4,SL_MSR(r1) + mfsdr1 r4 + stw r4,SL_SDR1(r1) + + /* Get a stable timebase and save it */ +1: mftbu r4 + stw r4,SL_TB(r1) + mftb r5 + stw r5,SL_TB+4(r1) + mftbu r3 + cmpw r3,r4 + bne 1b + + /* Save SPRGs */ + mfsprg r4,0 + stw r4,SL_SPRG0(r1) + mfsprg r4,1 + stw r4,SL_SPRG0+4(r1) + mfsprg r4,2 + stw r4,SL_SPRG0+8(r1) + mfsprg r4,3 + stw r4,SL_SPRG0+12(r1) + + /* Save BATs */ + mfdbatu r4,0 + stw r4,SL_DBAT0(r1) + mfdbatl r4,0 + stw r4,SL_DBAT0+4(r1) + mfdbatu r4,1 + stw r4,SL_DBAT1(r1) + mfdbatl r4,1 + stw r4,SL_DBAT1+4(r1) + mfdbatu r4,2 + stw r4,SL_DBAT2(r1) + mfdbatl r4,2 + stw r4,SL_DBAT2+4(r1) + mfdbatu r4,3 + stw r4,SL_DBAT3(r1) + mfdbatl r4,3 + stw r4,SL_DBAT3+4(r1) + mfibatu r4,0 + stw r4,SL_IBAT0(r1) + mfibatl r4,0 + stw r4,SL_IBAT0+4(r1) + mfibatu r4,1 + stw r4,SL_IBAT1(r1) + mfibatl r4,1 + stw r4,SL_IBAT1+4(r1) + mfibatu r4,2 + stw r4,SL_IBAT2(r1) + mfibatl r4,2 + stw r4,SL_IBAT2+4(r1) + mfibatu r4,3 + stw r4,SL_IBAT3(r1) + mfibatl r4,3 + stw r4,SL_IBAT3+4(r1) + + /* Backup various CPU config stuffs */ + bl __save_cpu_setup + + /* The ROM can wake us up via 2 different vectors: + * - On wallstreet & lombard, we must write a magic + * value 'Lars' at address 4 and a pointer to a + * memory location containing the PC to resume from + * at address 0. + * - On Core99, we must store the wakeup vector at + * address 0x80 and eventually it's parameters + * at address 0x84. I've have some trouble with those + * parameters however and I no longer use them. + */ + lis r5,grackle_wake_up@ha + addi r5,r5,grackle_wake_up@l + tophys(r5,r5) + stw r5,SL_PC(r1) + lis r4,KERNELBASE@h + tophys(r5,r1) + addi r5,r5,SL_PC + lis r6,MAGIC@ha + addi r6,r6,MAGIC@l + stw r5,0(r4) + stw r6,4(r4) + /* Setup stuffs at 0x80-0x84 for Core99 */ + lis r3,core99_wake_up@ha + addi r3,r3,core99_wake_up@l + tophys(r3,r3) + stw r3,0x80(r4) + stw r5,0x84(r4) + /* Store a pointer to our backup storage into + * a kernel global + */ + lis r3,sleep_storage@ha + addi r3,r3,sleep_storage@l + stw r5,0(r3) + + .globl low_cpu_die +low_cpu_die: + /* Flush & disable all caches */ + bl flush_disable_caches + + /* Turn off data relocation. */ + mfmsr r3 /* Save MSR in r7 */ + rlwinm r3,r3,0,28,26 /* Turn off DR bit */ + sync + mtmsr r3 + isync + +BEGIN_FTR_SECTION + /* Flush any pending L2 data prefetches to work around HW bug */ + sync + lis r3,0xfff0 + lwz r0,0(r3) /* perform cache-inhibited load to ROM */ + sync /* (caches are disabled at this point) */ +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) + +/* + * Set the HID0 and MSR for sleep. + */ + mfspr r2,SPRN_HID0 + rlwinm r2,r2,0,10,7 /* clear doze, nap */ + oris r2,r2,HID0_SLEEP@h + sync + isync + mtspr SPRN_HID0,r2 + sync + +/* This loop puts us back to sleep in case we have a spurrious + * wakeup so that the host bridge properly stays asleep. The + * CPU will be turned off, either after a known time (about 1 + * second) on wallstreet & lombard, or as soon as the CPU enters + * SLEEP mode on core99 + */ + mfmsr r2 + oris r2,r2,MSR_POW@h +1: sync + mtmsr r2 + isync + b 1b + +/* + * Here is the resume code. + */ + + +/* + * Core99 machines resume here + * r4 has the physical address of SL_PC(sp) (unused) + */ +_GLOBAL(core99_wake_up) + /* Make sure HID0 no longer contains any sleep bit and that data cache + * is disabled + */ + mfspr r3,SPRN_HID0 + rlwinm r3,r3,0,11,7 /* clear SLEEP, NAP, DOZE bits */ + rlwinm 3,r3,0,18,15 /* clear DCE, ICE */ + mtspr SPRN_HID0,r3 + sync + isync + + /* sanitize MSR */ + mfmsr r3 + ori r3,r3,MSR_EE|MSR_IP + xori r3,r3,MSR_EE|MSR_IP + sync + isync + mtmsr r3 + sync + isync + + /* Recover sleep storage */ + lis r3,sleep_storage@ha + addi r3,r3,sleep_storage@l + tophys(r3,r3) + lwz r1,0(r3) + + /* Pass thru to older resume code ... */ +/* + * Here is the resume code for older machines. + * r1 has the physical address of SL_PC(sp). + */ + +grackle_wake_up: + + /* Restore the kernel's segment registers before + * we do any r1 memory access as we are not sure they + * are in a sane state above the first 256Mb region + */ + li r0,16 /* load up segment register values */ + mtctr r0 /* for context 0 */ + lis r3,0x2000 /* Ku = 1, VSID = 0 */ + li r4,0 +3: mtsrin r3,r4 + addi r3,r3,0x111 /* increment VSID */ + addis r4,r4,0x1000 /* address of next segment */ + bdnz 3b + sync + isync + + subi r1,r1,SL_PC + + /* Restore various CPU config stuffs */ + bl __restore_cpu_setup + + /* Make sure all FPRs have been initialized */ + bl reloc_offset + bl __init_fpu_registers + + /* Invalidate & enable L1 cache, we don't care about + * whatever the ROM may have tried to write to memory + */ + bl __inval_enable_L1 + + /* Restore the BATs, and SDR1. Then we can turn on the MMU. */ + lwz r4,SL_SDR1(r1) + mtsdr1 r4 + lwz r4,SL_SPRG0(r1) + mtsprg 0,r4 + lwz r4,SL_SPRG0+4(r1) + mtsprg 1,r4 + lwz r4,SL_SPRG0+8(r1) + mtsprg 2,r4 + lwz r4,SL_SPRG0+12(r1) + mtsprg 3,r4 + + lwz r4,SL_DBAT0(r1) + mtdbatu 0,r4 + lwz r4,SL_DBAT0+4(r1) + mtdbatl 0,r4 + lwz r4,SL_DBAT1(r1) + mtdbatu 1,r4 + lwz r4,SL_DBAT1+4(r1) + mtdbatl 1,r4 + lwz r4,SL_DBAT2(r1) + mtdbatu 2,r4 + lwz r4,SL_DBAT2+4(r1) + mtdbatl 2,r4 + lwz r4,SL_DBAT3(r1) + mtdbatu 3,r4 + lwz r4,SL_DBAT3+4(r1) + mtdbatl 3,r4 + lwz r4,SL_IBAT0(r1) + mtibatu 0,r4 + lwz r4,SL_IBAT0+4(r1) + mtibatl 0,r4 + lwz r4,SL_IBAT1(r1) + mtibatu 1,r4 + lwz r4,SL_IBAT1+4(r1) + mtibatl 1,r4 + lwz r4,SL_IBAT2(r1) + mtibatu 2,r4 + lwz r4,SL_IBAT2+4(r1) + mtibatl 2,r4 + lwz r4,SL_IBAT3(r1) + mtibatu 3,r4 + lwz r4,SL_IBAT3+4(r1) + mtibatl 3,r4 + +BEGIN_FTR_SECTION + li r4,0 + mtspr SPRN_DBAT4U,r4 + mtspr SPRN_DBAT4L,r4 + mtspr SPRN_DBAT5U,r4 + mtspr SPRN_DBAT5L,r4 + mtspr SPRN_DBAT6U,r4 + mtspr SPRN_DBAT6L,r4 + mtspr SPRN_DBAT7U,r4 + mtspr SPRN_DBAT7L,r4 + mtspr SPRN_IBAT4U,r4 + mtspr SPRN_IBAT4L,r4 + mtspr SPRN_IBAT5U,r4 + mtspr SPRN_IBAT5L,r4 + mtspr SPRN_IBAT6U,r4 + mtspr SPRN_IBAT6L,r4 + mtspr SPRN_IBAT7U,r4 + mtspr SPRN_IBAT7L,r4 +END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) + + /* Flush all TLBs */ + lis r4,0x1000 +1: addic. r4,r4,-0x1000 + tlbie r4 + blt 1b + sync + + /* restore the MSR and turn on the MMU */ + lwz r3,SL_MSR(r1) + bl turn_on_mmu + + /* get back the stack pointer */ + tovirt(r1,r1) + + /* Restore TB */ + li r3,0 + mttbl r3 + lwz r3,SL_TB(r1) + lwz r4,SL_TB+4(r1) + mttbu r3 + mttbl r4 + + /* Restore the callee-saved registers and return */ + lwz r0,SL_CR(r1) + mtcr r0 + lwz r2,SL_R2(r1) + lmw r12,SL_R12(r1) + addi r1,r1,SL_SIZE + lwz r0,4(r1) + mtlr r0 + blr + +turn_on_mmu: + mflr r4 + tovirt(r4,r4) + mtsrr0 r4 + mtsrr1 r3 + sync + isync + rfi + +#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */ + + .section .data + .balign L1_CACHE_LINE_SIZE +sleep_storage: + .long 0 + .balign L1_CACHE_LINE_SIZE, 0 + +#endif /* CONFIG_6xx */ + .section .text diff --git a/arch/powerpc/platforms/powermac/pmac_smp.c b/arch/powerpc/platforms/powermac/pmac_smp.c new file mode 100644 index 00000000000..995e9095d86 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_smp.c @@ -0,0 +1,716 @@ +/* + * SMP support for power macintosh. + * + * We support both the old "powersurge" SMP architecture + * and the current Core99 (G4 PowerMac) machines. + * + * Note that we don't support the very first rev. of + * Apple/DayStar 2 CPUs board, the one with the funky + * watchdog. Hopefully, none of these should be there except + * maybe internally to Apple. I should probably still add some + * code to detect this card though and disable SMP. --BenH. + * + * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net) + * and Ben Herrenschmidt <benh@kernel.crashing.org>. + * + * Support for DayStar quad CPU cards + * Copyright (C) XLR8, Inc. 1994-2000 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/hardirq.h> +#include <linux/cpu.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/residual.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/time.h> +#include <asm/open_pic.h> +#include <asm/cacheflush.h> +#include <asm/keylargo.h> + +/* + * Powersurge (old powermac SMP) support. + */ + +extern void __secondary_start_pmac_0(void); + +/* Addresses for powersurge registers */ +#define HAMMERHEAD_BASE 0xf8000000 +#define HHEAD_CONFIG 0x90 +#define HHEAD_SEC_INTR 0xc0 + +/* register for interrupting the primary processor on the powersurge */ +/* N.B. this is actually the ethernet ROM! */ +#define PSURGE_PRI_INTR 0xf3019000 + +/* register for storing the start address for the secondary processor */ +/* N.B. this is the PCI config space address register for the 1st bridge */ +#define PSURGE_START 0xf2800000 + +/* Daystar/XLR8 4-CPU card */ +#define PSURGE_QUAD_REG_ADDR 0xf8800000 + +#define PSURGE_QUAD_IRQ_SET 0 +#define PSURGE_QUAD_IRQ_CLR 1 +#define PSURGE_QUAD_IRQ_PRIMARY 2 +#define PSURGE_QUAD_CKSTOP_CTL 3 +#define PSURGE_QUAD_PRIMARY_ARB 4 +#define PSURGE_QUAD_BOARD_ID 6 +#define PSURGE_QUAD_WHICH_CPU 7 +#define PSURGE_QUAD_CKSTOP_RDBK 8 +#define PSURGE_QUAD_RESET_CTL 11 + +#define PSURGE_QUAD_OUT(r, v) (out_8(quad_base + ((r) << 4) + 4, (v))) +#define PSURGE_QUAD_IN(r) (in_8(quad_base + ((r) << 4) + 4) & 0x0f) +#define PSURGE_QUAD_BIS(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v))) +#define PSURGE_QUAD_BIC(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v))) + +/* virtual addresses for the above */ +static volatile u8 __iomem *hhead_base; +static volatile u8 __iomem *quad_base; +static volatile u32 __iomem *psurge_pri_intr; +static volatile u8 __iomem *psurge_sec_intr; +static volatile u32 __iomem *psurge_start; + +/* values for psurge_type */ +#define PSURGE_NONE -1 +#define PSURGE_DUAL 0 +#define PSURGE_QUAD_OKEE 1 +#define PSURGE_QUAD_COTTON 2 +#define PSURGE_QUAD_ICEGRASS 3 + +/* what sort of powersurge board we have */ +static int psurge_type = PSURGE_NONE; + +/* L2 and L3 cache settings to pass from CPU0 to CPU1 */ +volatile static long int core99_l2_cache; +volatile static long int core99_l3_cache; + +/* Timebase freeze GPIO */ +static unsigned int core99_tb_gpio; + +/* Sync flag for HW tb sync */ +static volatile int sec_tb_reset = 0; +static unsigned int pri_tb_hi, pri_tb_lo; +static unsigned int pri_tb_stamp; + +static void __devinit core99_init_caches(int cpu) +{ + if (!cpu_has_feature(CPU_FTR_L2CR)) + return; + + if (cpu == 0) { + core99_l2_cache = _get_L2CR(); + printk("CPU0: L2CR is %lx\n", core99_l2_cache); + } else { + printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR()); + _set_L2CR(0); + _set_L2CR(core99_l2_cache); + printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache); + } + + if (!cpu_has_feature(CPU_FTR_L3CR)) + return; + + if (cpu == 0){ + core99_l3_cache = _get_L3CR(); + printk("CPU0: L3CR is %lx\n", core99_l3_cache); + } else { + printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR()); + _set_L3CR(0); + _set_L3CR(core99_l3_cache); + printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache); + } +} + +/* + * Set and clear IPIs for powersurge. + */ +static inline void psurge_set_ipi(int cpu) +{ + if (psurge_type == PSURGE_NONE) + return; + if (cpu == 0) + in_be32(psurge_pri_intr); + else if (psurge_type == PSURGE_DUAL) + out_8(psurge_sec_intr, 0); + else + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu); +} + +static inline void psurge_clr_ipi(int cpu) +{ + if (cpu > 0) { + switch(psurge_type) { + case PSURGE_DUAL: + out_8(psurge_sec_intr, ~0); + case PSURGE_NONE: + break; + default: + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu); + } + } +} + +/* + * On powersurge (old SMP powermac architecture) we don't have + * separate IPIs for separate messages like openpic does. Instead + * we have a bitmap for each processor, where a 1 bit means that + * the corresponding message is pending for that processor. + * Ideally each cpu's entry would be in a different cache line. + * -- paulus. + */ +static unsigned long psurge_smp_message[NR_CPUS]; + +void psurge_smp_message_recv(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + int msg; + + /* clear interrupt */ + psurge_clr_ipi(cpu); + + if (num_online_cpus() < 2) + return; + + /* make sure there is a message there */ + for (msg = 0; msg < 4; msg++) + if (test_and_clear_bit(msg, &psurge_smp_message[cpu])) + smp_message_recv(msg, regs); +} + +irqreturn_t psurge_primary_intr(int irq, void *d, struct pt_regs *regs) +{ + psurge_smp_message_recv(regs); + return IRQ_HANDLED; +} + +static void smp_psurge_message_pass(int target, int msg, unsigned long data, + int wait) +{ + int i; + + if (num_online_cpus() < 2) + return; + + for (i = 0; i < NR_CPUS; i++) { + if (!cpu_online(i)) + continue; + if (target == MSG_ALL + || (target == MSG_ALL_BUT_SELF && i != smp_processor_id()) + || target == i) { + set_bit(msg, &psurge_smp_message[i]); + psurge_set_ipi(i); + } + } +} + +/* + * Determine a quad card presence. We read the board ID register, we + * force the data bus to change to something else, and we read it again. + * It it's stable, then the register probably exist (ugh !) + */ +static int __init psurge_quad_probe(void) +{ + int type; + unsigned int i; + + type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID); + if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS + || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID)) + return PSURGE_DUAL; + + /* looks OK, try a slightly more rigorous test */ + /* bogus is not necessarily cacheline-aligned, + though I don't suppose that really matters. -- paulus */ + for (i = 0; i < 100; i++) { + volatile u32 bogus[8]; + bogus[(0+i)%8] = 0x00000000; + bogus[(1+i)%8] = 0x55555555; + bogus[(2+i)%8] = 0xFFFFFFFF; + bogus[(3+i)%8] = 0xAAAAAAAA; + bogus[(4+i)%8] = 0x33333333; + bogus[(5+i)%8] = 0xCCCCCCCC; + bogus[(6+i)%8] = 0xCCCCCCCC; + bogus[(7+i)%8] = 0x33333333; + wmb(); + asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory"); + mb(); + if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID)) + return PSURGE_DUAL; + } + return type; +} + +static void __init psurge_quad_init(void) +{ + int procbits; + + if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351); + procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU); + if (psurge_type == PSURGE_QUAD_ICEGRASS) + PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits); + else + PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits); + mdelay(33); + out_8(psurge_sec_intr, ~0); + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits); + PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits); + if (psurge_type != PSURGE_QUAD_ICEGRASS) + PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits); + PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits); + mdelay(33); + PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits); + mdelay(33); + PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits); + mdelay(33); +} + +static int __init smp_psurge_probe(void) +{ + int i, ncpus; + + /* We don't do SMP on the PPC601 -- paulus */ + if (PVR_VER(mfspr(SPRN_PVR)) == 1) + return 1; + + /* + * The powersurge cpu board can be used in the generation + * of powermacs that have a socket for an upgradeable cpu card, + * including the 7500, 8500, 9500, 9600. + * The device tree doesn't tell you if you have 2 cpus because + * OF doesn't know anything about the 2nd processor. + * Instead we look for magic bits in magic registers, + * in the hammerhead memory controller in the case of the + * dual-cpu powersurge board. -- paulus. + */ + if (find_devices("hammerhead") == NULL) + return 1; + + hhead_base = ioremap(HAMMERHEAD_BASE, 0x800); + quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024); + psurge_sec_intr = hhead_base + HHEAD_SEC_INTR; + + psurge_type = psurge_quad_probe(); + if (psurge_type != PSURGE_DUAL) { + psurge_quad_init(); + /* All released cards using this HW design have 4 CPUs */ + ncpus = 4; + } else { + iounmap(quad_base); + if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) { + /* not a dual-cpu card */ + iounmap(hhead_base); + psurge_type = PSURGE_NONE; + return 1; + } + ncpus = 2; + } + + psurge_start = ioremap(PSURGE_START, 4); + psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); + + /* this is not actually strictly necessary -- paulus. */ + for (i = 1; i < ncpus; ++i) + smp_hw_index[i] = i; + + if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); + + return ncpus; +} + +static void __init smp_psurge_kick_cpu(int nr) +{ + unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; + unsigned long a; + + /* may need to flush here if secondary bats aren't setup */ + for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32) + asm volatile("dcbf 0,%0" : : "r" (a) : "memory"); + asm volatile("sync"); + + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); + + out_be32(psurge_start, start); + mb(); + + psurge_set_ipi(nr); + udelay(10); + psurge_clr_ipi(nr); + + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); +} + +/* + * With the dual-cpu powersurge board, the decrementers and timebases + * of both cpus are frozen after the secondary cpu is started up, + * until we give the secondary cpu another interrupt. This routine + * uses this to get the timebases synchronized. + * -- paulus. + */ +static void __init psurge_dual_sync_tb(int cpu_nr) +{ + int t; + + set_dec(tb_ticks_per_jiffy); + set_tb(0, 0); + last_jiffy_stamp(cpu_nr) = 0; + + if (cpu_nr > 0) { + mb(); + sec_tb_reset = 1; + return; + } + + /* wait for the secondary to have reset its TB before proceeding */ + for (t = 10000000; t > 0 && !sec_tb_reset; --t) + ; + + /* now interrupt the secondary, starting both TBs */ + psurge_set_ipi(1); + + smp_tb_synchronized = 1; +} + +static struct irqaction psurge_irqaction = { + .handler = psurge_primary_intr, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "primary IPI", +}; + +static void __init smp_psurge_setup_cpu(int cpu_nr) +{ + + if (cpu_nr == 0) { + /* If we failed to start the second CPU, we should still + * send it an IPI to start the timebase & DEC or we might + * have them stuck. + */ + if (num_online_cpus() < 2) { + if (psurge_type == PSURGE_DUAL) + psurge_set_ipi(1); + return; + } + /* reset the entry point so if we get another intr we won't + * try to startup again */ + out_be32(psurge_start, 0x100); + if (setup_irq(30, &psurge_irqaction)) + printk(KERN_ERR "Couldn't get primary IPI interrupt"); + } + + if (psurge_type == PSURGE_DUAL) + psurge_dual_sync_tb(cpu_nr); +} + +void __init smp_psurge_take_timebase(void) +{ + /* Dummy implementation */ +} + +void __init smp_psurge_give_timebase(void) +{ + /* Dummy implementation */ +} + +static int __init smp_core99_probe(void) +{ +#ifdef CONFIG_6xx + extern int powersave_nap; +#endif + struct device_node *cpus, *firstcpu; + int i, ncpus = 0, boot_cpu = -1; + u32 *tbprop = NULL; + + if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345); + cpus = firstcpu = find_type_devices("cpu"); + while(cpus != NULL) { + u32 *regprop = (u32 *)get_property(cpus, "reg", NULL); + char *stateprop = (char *)get_property(cpus, "state", NULL); + if (regprop != NULL && stateprop != NULL && + !strncmp(stateprop, "running", 7)) + boot_cpu = *regprop; + ++ncpus; + cpus = cpus->next; + } + if (boot_cpu == -1) + printk(KERN_WARNING "Couldn't detect boot CPU !\n"); + if (boot_cpu != 0) + printk(KERN_WARNING "Boot CPU is %d, unsupported setup !\n", boot_cpu); + + if (machine_is_compatible("MacRISC4")) { + extern struct smp_ops_t core99_smp_ops; + + core99_smp_ops.take_timebase = smp_generic_take_timebase; + core99_smp_ops.give_timebase = smp_generic_give_timebase; + } else { + if (firstcpu != NULL) + tbprop = (u32 *)get_property(firstcpu, "timebase-enable", NULL); + if (tbprop) + core99_tb_gpio = *tbprop; + else + core99_tb_gpio = KL_GPIO_TB_ENABLE; + } + + if (ncpus > 1) { + mpic_request_ipis(); + for (i = 1; i < ncpus; ++i) + smp_hw_index[i] = i; +#ifdef CONFIG_6xx + powersave_nap = 0; +#endif + core99_init_caches(0); + } + + return ncpus; +} + +static void __devinit smp_core99_kick_cpu(int nr) +{ + unsigned long save_vector, new_vector; + unsigned long flags; + + volatile unsigned long *vector + = ((volatile unsigned long *)(KERNELBASE+0x100)); + if (nr < 0 || nr > 3) + return; + if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346); + + local_irq_save(flags); + local_irq_disable(); + + /* Save reset vector */ + save_vector = *vector; + + /* Setup fake reset vector that does + * b __secondary_start_pmac_0 + nr*8 - KERNELBASE + */ + new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8; + *vector = 0x48000002 + new_vector - KERNELBASE; + + /* flush data cache and inval instruction cache */ + flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); + + /* Put some life in our friend */ + pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); + + /* FIXME: We wait a bit for the CPU to take the exception, I should + * instead wait for the entry code to set something for me. Well, + * ideally, all that crap will be done in prom.c and the CPU left + * in a RAM-based wait loop like CHRP. + */ + mdelay(1); + + /* Restore our exception vector */ + *vector = save_vector; + flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); + + local_irq_restore(flags); + if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347); +} + +static void __devinit smp_core99_setup_cpu(int cpu_nr) +{ + /* Setup L2/L3 */ + if (cpu_nr != 0) + core99_init_caches(cpu_nr); + + /* Setup openpic */ + mpic_setup_this_cpu(); + + if (cpu_nr == 0) { +#ifdef CONFIG_POWER4 + extern void g5_phy_disable_cpu1(void); + + /* If we didn't start the second CPU, we must take + * it off the bus + */ + if (machine_is_compatible("MacRISC4") && + num_online_cpus() < 2) + g5_phy_disable_cpu1(); +#endif /* CONFIG_POWER4 */ + if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349); + } +} + +/* not __init, called in sleep/wakeup code */ +void smp_core99_take_timebase(void) +{ + unsigned long flags; + + /* tell the primary we're here */ + sec_tb_reset = 1; + mb(); + + /* wait for the primary to set pri_tb_hi/lo */ + while (sec_tb_reset < 2) + mb(); + + /* set our stuff the same as the primary */ + local_irq_save(flags); + set_dec(1); + set_tb(pri_tb_hi, pri_tb_lo); + last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp; + mb(); + + /* tell the primary we're done */ + sec_tb_reset = 0; + mb(); + local_irq_restore(flags); +} + +/* not __init, called in sleep/wakeup code */ +void smp_core99_give_timebase(void) +{ + unsigned long flags; + unsigned int t; + + /* wait for the secondary to be in take_timebase */ + for (t = 100000; t > 0 && !sec_tb_reset; --t) + udelay(10); + if (!sec_tb_reset) { + printk(KERN_WARNING "Timeout waiting sync on second CPU\n"); + return; + } + + /* freeze the timebase and read it */ + /* disable interrupts so the timebase is disabled for the + shortest possible time */ + local_irq_save(flags); + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4); + pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); + mb(); + pri_tb_hi = get_tbu(); + pri_tb_lo = get_tbl(); + pri_tb_stamp = last_jiffy_stamp(smp_processor_id()); + mb(); + + /* tell the secondary we're ready */ + sec_tb_reset = 2; + mb(); + + /* wait for the secondary to have taken it */ + for (t = 100000; t > 0 && sec_tb_reset; --t) + udelay(10); + if (sec_tb_reset) + printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); + else + smp_tb_synchronized = 1; + + /* Now, restart the timebase by leaving the GPIO to an open collector */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); + pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); + local_irq_restore(flags); +} + +void smp_core99_message_pass(int target, int msg, unsigned long data, int wait) +{ + cpumask_t mask = CPU_MASK_ALL; + /* make sure we're sending something that translates to an IPI */ + if (msg > 0x3) { + printk("SMP %d: smp_message_pass: unknown msg %d\n", + smp_processor_id(), msg); + return; + } + switch (target) { + case MSG_ALL: + mpic_send_ipi(msg, mask); + break; + case MSG_ALL_BUT_SELF: + cpu_clear(smp_processor_id(), mask); + mpic_send_ipi(msg, mask); + break; + default: + mpic_send_ipi(msg, cpumask_of_cpu(target)); + break; + } +} + + +/* PowerSurge-style Macs */ +struct smp_ops_t psurge_smp_ops = { + .message_pass = smp_psurge_message_pass, + .probe = smp_psurge_probe, + .kick_cpu = smp_psurge_kick_cpu, + .setup_cpu = smp_psurge_setup_cpu, + .give_timebase = smp_psurge_give_timebase, + .take_timebase = smp_psurge_take_timebase, +}; + +/* Core99 Macs (dual G4s) */ +struct smp_ops_t core99_smp_ops = { + .message_pass = smp_core99_message_pass, + .probe = smp_core99_probe, + .kick_cpu = smp_core99_kick_cpu, + .setup_cpu = smp_core99_setup_cpu, + .give_timebase = smp_core99_give_timebase, + .take_timebase = smp_core99_take_timebase, +}; + +#ifdef CONFIG_HOTPLUG_CPU + +int __cpu_disable(void) +{ + cpu_clear(smp_processor_id(), cpu_online_map); + + /* XXX reset cpu affinity here */ + openpic_set_priority(0xf); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + mb(); + udelay(20); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + return 0; +} + +extern void low_cpu_die(void) __attribute__((noreturn)); /* in pmac_sleep.S */ +static int cpu_dead[NR_CPUS]; + +void cpu_die(void) +{ + local_irq_disable(); + cpu_dead[smp_processor_id()] = 1; + mb(); + low_cpu_die(); +} + +void __cpu_die(unsigned int cpu) +{ + int timeout; + + timeout = 1000; + while (!cpu_dead[cpu]) { + if (--timeout == 0) { + printk("CPU %u refused to die!\n", cpu); + break; + } + msleep(1); + } + cpu_callin_map[cpu] = 0; + cpu_dead[cpu] = 0; +} + +#endif diff --git a/arch/powerpc/platforms/powermac/pmac_time.c b/arch/powerpc/platforms/powermac/pmac_time.c new file mode 100644 index 00000000000..ff6adff36cb --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac_time.c @@ -0,0 +1,291 @@ +/* + * Support for periodic interrupts (100 per second) and for getting + * the current time from the RTC on Power Macintoshes. + * + * We use the decrementer register for our periodic interrupts. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996 Paul Mackerras. + */ +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/hardirq.h> + +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/nvram.h> + +/* Apparently the RTC stores seconds since 1 Jan 1904 */ +#define RTC_OFFSET 2082844800 + +/* + * Calibrate the decrementer frequency with the VIA timer 1. + */ +#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ + +/* VIA registers */ +#define RS 0x200 /* skip between registers */ +#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ +#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ +#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ +#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ +#define ACR (11*RS) /* Auxiliary control register */ +#define IFR (13*RS) /* Interrupt flag register */ + +/* Bits in ACR */ +#define T1MODE 0xc0 /* Timer 1 mode */ +#define T1MODE_CONT 0x40 /* continuous interrupts */ + +/* Bits in IFR and IER */ +#define T1_INT 0x40 /* Timer 1 interrupt */ + +extern struct timezone sys_tz; + +long __init +pmac_time_init(void) +{ +#ifdef CONFIG_NVRAM + s32 delta = 0; + int dst; + + delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16; + delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8; + delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb); + if (delta & 0x00800000UL) + delta |= 0xFF000000UL; + dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0); + printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60, + dst ? "on" : "off"); + return delta; +#else + return 0; +#endif +} + +unsigned long +pmac_get_rtc_time(void) +{ +#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) + struct adb_request req; + unsigned long now; +#endif + + /* Get the time from the RTC */ + switch (sys_ctrler) { +#ifdef CONFIG_ADB_CUDA + case SYS_CTRLER_CUDA: + if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0) + return 0; + while (!req.complete) + cuda_poll(); + if (req.reply_len != 7) + printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n", + req.reply_len); + now = (req.reply[3] << 24) + (req.reply[4] << 16) + + (req.reply[5] << 8) + req.reply[6]; + return now - RTC_OFFSET; +#endif /* CONFIG_ADB_CUDA */ +#ifdef CONFIG_ADB_PMU + case SYS_CTRLER_PMU: + if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) + return 0; + while (!req.complete) + pmu_poll(); + if (req.reply_len != 4) + printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n", + req.reply_len); + now = (req.reply[0] << 24) + (req.reply[1] << 16) + + (req.reply[2] << 8) + req.reply[3]; + return now - RTC_OFFSET; +#endif /* CONFIG_ADB_PMU */ + default: ; + } + return 0; +} + +int +pmac_set_rtc_time(unsigned long nowtime) +{ +#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) + struct adb_request req; +#endif + + nowtime += RTC_OFFSET; + + switch (sys_ctrler) { +#ifdef CONFIG_ADB_CUDA + case SYS_CTRLER_CUDA: + if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME, + nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) + return 0; + while (!req.complete) + cuda_poll(); + if ((req.reply_len != 3) && (req.reply_len != 7)) + printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n", + req.reply_len); + return 1; +#endif /* CONFIG_ADB_CUDA */ +#ifdef CONFIG_ADB_PMU + case SYS_CTRLER_PMU: + if (pmu_request(&req, NULL, 5, PMU_SET_RTC, + nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) + return 0; + while (!req.complete) + pmu_poll(); + if (req.reply_len != 0) + printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n", + req.reply_len); + return 1; +#endif /* CONFIG_ADB_PMU */ + default: + return 0; + } +} + +/* + * Calibrate the decrementer register using VIA timer 1. + * This is used both on powermacs and CHRP machines. + */ +int __init +via_calibrate_decr(void) +{ + struct device_node *vias; + volatile unsigned char __iomem *via; + int count = VIA_TIMER_FREQ_6 / 100; + unsigned int dstart, dend; + + vias = find_devices("via-cuda"); + if (vias == 0) + vias = find_devices("via-pmu"); + if (vias == 0) + vias = find_devices("via"); + if (vias == 0 || vias->n_addrs == 0) + return 0; + via = ioremap(vias->addrs[0].address, vias->addrs[0].size); + + /* set timer 1 for continuous interrupts */ + out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); + /* set the counter to a small value */ + out_8(&via[T1CH], 2); + /* set the latch to `count' */ + out_8(&via[T1LL], count); + out_8(&via[T1LH], count >> 8); + /* wait until it hits 0 */ + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dstart = get_dec(); + /* clear the interrupt & wait until it hits 0 again */ + in_8(&via[T1CL]); + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dend = get_dec(); + + tb_ticks_per_jiffy = (dstart - dend) / (6 * (HZ/100)); + tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); + + printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", + tb_ticks_per_jiffy, dstart - dend); + + iounmap(via); + + return 1; +} + +#ifdef CONFIG_PM +/* + * Reset the time after a sleep. + */ +static int +time_sleep_notify(struct pmu_sleep_notifier *self, int when) +{ + static unsigned long time_diff; + unsigned long flags; + unsigned long seq; + + switch (when) { + case PBOOK_SLEEP_NOW: + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + time_diff = xtime.tv_sec - pmac_get_rtc_time(); + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); + break; + case PBOOK_WAKE: + write_seqlock_irqsave(&xtime_lock, flags); + xtime.tv_sec = pmac_get_rtc_time() + time_diff; + xtime.tv_nsec = 0; + last_rtc_update = xtime.tv_sec; + write_sequnlock_irqrestore(&xtime_lock, flags); + break; + } + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier time_sleep_notifier = { + time_sleep_notify, SLEEP_LEVEL_MISC, +}; +#endif /* CONFIG_PM */ + +/* + * Query the OF and get the decr frequency. + * This was taken from the pmac time_init() when merging the prep/pmac + * time functions. + */ +void __init +pmac_calibrate_decr(void) +{ + struct device_node *cpu; + unsigned int freq, *fp; + +#ifdef CONFIG_PM + pmu_register_sleep_notifier(&time_sleep_notifier); +#endif /* CONFIG_PM */ + + /* We assume MacRISC2 machines have correct device-tree + * calibration. That's better since the VIA itself seems + * to be slightly off. --BenH + */ + if (!machine_is_compatible("MacRISC2") && + !machine_is_compatible("MacRISC3") && + !machine_is_compatible("MacRISC4")) + if (via_calibrate_decr()) + return; + + /* Special case: QuickSilver G4s seem to have a badly calibrated + * timebase-frequency in OF, VIA is much better on these. We should + * probably implement calibration based on the KL timer on these + * machines anyway... -BenH + */ + if (machine_is_compatible("PowerMac3,5")) + if (via_calibrate_decr()) + return; + /* + * The cpu node should have a timebase-frequency property + * to tell us the rate at which the decrementer counts. + */ + cpu = find_type_devices("cpu"); + if (cpu == 0) + panic("can't find cpu node in time_init"); + fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL); + if (fp == 0) + panic("can't get cpu timebase frequency"); + freq = *fp; + printk("time_init: decrementer frequency = %u.%.6u MHz\n", + freq/1000000, freq%1000000); + tb_ticks_per_jiffy = freq / HZ; + tb_to_us = mulhwu_scale_factor(freq, 1000000); +} diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig new file mode 100644 index 00000000000..673ac47a162 --- /dev/null +++ b/arch/powerpc/platforms/prep/Kconfig @@ -0,0 +1,22 @@ + +config PREP_RESIDUAL + bool "Support for PReP Residual Data" + depends on PPC_PREP + help + Some PReP systems have residual data passed to the kernel by the + firmware. This allows detection of memory size, devices present and + other useful pieces of information. Sometimes this information is + not present or incorrect, in which case it could lead to the machine + behaving incorrectly. If this happens, either disable PREP_RESIDUAL + or pass the 'noresidual' option to the kernel. + + If you are running a PReP system, say Y here, otherwise say N. + +config PROC_PREPRESIDUAL + bool "Support for reading of PReP Residual Data in /proc" + depends on PREP_RESIDUAL && PROC_FS + help + Enabling this option will create a /proc/residual file which allows + you to get at the residual data on PReP systems. You will need a tool + (lsresidual) to parse it. If you aren't on a PReP system, you don't + want this. diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig new file mode 100644 index 00000000000..7a3b6fc4d97 --- /dev/null +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -0,0 +1,47 @@ + +config PPC_SPLPAR + depends on PPC_PSERIES + bool "Support for shared-processor logical partitions" + default n + help + Enabling this option will make the kernel run more efficiently + on logically-partitioned pSeries systems which use shared + processors, that is, which share physical processors between + two or more partitions. + +config HMT + bool "Hardware multithreading" + depends on SMP && PPC_PSERIES && BROKEN + help + This option enables hardware multithreading on RS64 cpus. + pSeries systems p620 and p660 have such a cpu type. + +config EEH + bool "PCI Extended Error Handling (EEH)" if EMBEDDED + depends on PPC_PSERIES + default y if !EMBEDDED + +config PPC_RTAS + bool + depends on PPC_PSERIES || PPC_BPA + default y + +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config SCANLOG + tristate "Scanlog dump interface" + depends on RTAS_PROC && PPC_PSERIES + +config LPARCFG + tristate "LPAR Configuration Data" + depends on PPC_PSERIES || PPC_ISERIES + help + Provide system capacity information via human readable + <key word>=<value> pairs through a /proc/ppc64/lparcfg interface. |