diff options
Diffstat (limited to 'arch/powerpc/sysdev/qe_lib')
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/Kconfig | 2 | ||||
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/qe.c | 356 | ||||
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/ucc_slow.c | 10 |
3 files changed, 342 insertions, 26 deletions
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index f611d344a12..adc66212a41 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -4,7 +4,7 @@ config UCC_SLOW bool - default n + default y if SERIAL_QE help This option provides qe_lib support to UCC slow protocols: UART, BISYNC, QMC diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 3d57d3835b0..5ef844da935 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/ioport.h> +#include <linux/crc32.h> #include <asm/irq.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -64,17 +65,22 @@ static phys_addr_t qebase = -1; phys_addr_t get_qe_base(void) { struct device_node *qe; + unsigned int size; + const void *prop; if (qebase != -1) return qebase; - qe = of_find_node_by_type(NULL, "qe"); - if (qe) { - unsigned int size; - const void *prop = of_get_property(qe, "reg", &size); - qebase = of_translate_address(qe, prop); - of_node_put(qe); - }; + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return qebase; + } + + prop = of_get_property(qe, "reg", &size); + qebase = of_translate_address(qe, prop); + of_node_put(qe); return qebase; } @@ -152,34 +158,45 @@ static unsigned int brg_clk = 0; unsigned int get_brg_clk(void) { struct device_node *qe; + unsigned int size; + const u32 *prop; + if (brg_clk) return brg_clk; - qe = of_find_node_by_type(NULL, "qe"); - if (qe) { - unsigned int size; - const u32 *prop = of_get_property(qe, "brg-frequency", &size); - brg_clk = *prop; - of_node_put(qe); - }; + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return brg_clk; + } + + prop = of_get_property(qe, "brg-frequency", &size); + if (!prop || size != sizeof(*prop)) + return brg_clk; + + brg_clk = *prop; + of_node_put(qe); + return brg_clk; } /* Program the BRG to the given sampling rate and multiplier * - * @brg: the BRG, 1-16 + * @brg: the BRG, QE_BRG1 - QE_BRG16 * @rate: the desired sampling rate * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01, * then 'multiplier' should be 8. - * - * Also note that the value programmed into the BRGC register must be even. */ -void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier) +int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) { u32 divisor, tempval; u32 div16 = 0; + if ((brg < QE_BRG1) || (brg > QE_BRG16)) + return -EINVAL; + divisor = get_brg_clk() / (rate * multiplier); if (divisor > QE_BRGC_DIVISOR_MAX + 1) { @@ -196,8 +213,43 @@ void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier) tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE | div16; - out_be32(&qe_immr->brg.brgc[brg - 1], tempval); + out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval); + + return 0; +} +EXPORT_SYMBOL(qe_setbrg); + +/* Convert a string to a QE clock source enum + * + * This function takes a string, typically from a property in the device + * tree, and returns the corresponding "enum qe_clock" value. +*/ +enum qe_clock qe_clock_source(const char *source) +{ + unsigned int i; + + if (strcasecmp(source, "none") == 0) + return QE_CLK_NONE; + + if (strncasecmp(source, "brg", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 16)) + return (QE_BRG1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + if (strncasecmp(source, "clk", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 24)) + return (QE_CLK1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + return QE_CLK_DUMMY; } +EXPORT_SYMBOL(qe_clock_source); /* Initialize SNUMs (thread serial numbers) according to * QE Module Control chapter, SNUM table @@ -285,7 +337,7 @@ static rh_info_t qe_muram_info; static void qe_muram_init(void) { struct device_node *np; - u32 address; + const u32 *address; u64 size; unsigned int flags; @@ -298,11 +350,21 @@ static void qe_muram_init(void) /* XXX: This is a subset of the available muram. It * varies with the processor and the microcode patches activated. */ - if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) { - address = *of_get_address(np, 0, &size, &flags); - of_node_put(np); - rh_attach_region(&qe_muram_info, address, (int) size); + np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data"); + if (!np) { + np = of_find_node_by_name(NULL, "data-only"); + if (!np) { + WARN_ON(1); + return; + } } + + address = of_get_address(np, 0, &size, &flags); + WARN_ON(!address); + + of_node_put(np); + if (address) + rh_attach_region(&qe_muram_info, *address, (int)size); } /* This function returns an index into the MURAM area. @@ -358,3 +420,249 @@ void *qe_muram_addr(unsigned long offset) return (void *)&qe_immr->muram[offset]; } EXPORT_SYMBOL(qe_muram_addr); + +/* The maximum number of RISCs we support */ +#define MAX_QE_RISC 2 + +/* Firmware information stored here for qe_get_firmware_info() */ +static struct qe_firmware_info qe_firmware_info; + +/* + * Set to 1 if QE firmware has been uploaded, and therefore + * qe_firmware_info contains valid data. + */ +static int qe_firmware_uploaded; + +/* + * Upload a QE microcode + * + * This function is a worker function for qe_upload_firmware(). It does + * the actual uploading of the microcode. + */ +static void qe_upload_microcode(const void *base, + const struct qe_microcode *ucode) +{ + const __be32 *code = base + be32_to_cpu(ucode->code_offset); + unsigned int i; + + if (ucode->major || ucode->minor || ucode->revision) + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s' version %u.%u.%u\n", + ucode->id, ucode->major, ucode->minor, ucode->revision); + else + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s'\n", ucode->id); + + /* Use auto-increment */ + out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) | + QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR); + + for (i = 0; i < be32_to_cpu(ucode->count); i++) + out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i])); +} + +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See Documentation/powerpc/qe-firmware.txt for information on QE microcode + * uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; + + if (!firmware) { + printk(KERN_ERR "qe-firmware: invalid pointer\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printk(KERN_ERR "qe-firmware: not a microcode\n"); + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printk(KERN_ERR "qe-firmware: unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) { + printk(KERN_ERR "qe-firmware: invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(__be32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(__be32)) { + printk(KERN_ERR "qe-firmware: invalid length\n"); + return -EPERM; + } + + /* Validate the CRC */ + crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size)); + if (crc != crc32(0, firmware, calc_size)) { + printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) + setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR); + + if (firmware->soc.model) + printk(KERN_INFO + "qe-firmware: firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printk(KERN_INFO "qe-firmware: firmware '%s'\n", + firmware->id); + + /* + * The QE only supports one microcode per RISC, so clear out all the + * saved microcode information and put in the new. + */ + memset(&qe_firmware_info, 0, sizeof(qe_firmware_info)); + strcpy(qe_firmware_info.id, firmware->id); + qe_firmware_info.extended_modes = firmware->extended_modes; + memcpy(qe_firmware_info.vtraps, firmware->vtraps, + sizeof(firmware->vtraps)); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + qe_firmware_uploaded = 1; + + return 0; +} +EXPORT_SYMBOL(qe_upload_firmware); + +/* + * Get info on the currently-loaded firmware + * + * This function also checks the device tree to see if the boot loader has + * uploaded a firmware already. + */ +struct qe_firmware_info *qe_get_firmware_info(void) +{ + static int initialized; + struct property *prop; + struct device_node *qe; + struct device_node *fw = NULL; + const char *sprop; + unsigned int i; + + /* + * If we haven't checked yet, and a driver hasn't uploaded a firmware + * yet, then check the device tree for information. + */ + if (initialized || qe_firmware_uploaded) + return NULL; + + initialized = 1; + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return NULL; + } + + /* Find the 'firmware' child node */ + for_each_child_of_node(qe, fw) { + if (strcmp(fw->name, "firmware") == 0) + break; + } + + of_node_put(qe); + + /* Did we find the 'firmware' node? */ + if (!fw) + return NULL; + + qe_firmware_uploaded = 1; + + /* Copy the data into qe_firmware_info*/ + sprop = of_get_property(fw, "id", NULL); + if (sprop) + strncpy(qe_firmware_info.id, sprop, + sizeof(qe_firmware_info.id) - 1); + + prop = of_find_property(fw, "extended-modes", NULL); + if (prop && (prop->length == sizeof(u64))) { + const u64 *iprop = prop->value; + + qe_firmware_info.extended_modes = *iprop; + } + + prop = of_find_property(fw, "virtual-traps", NULL); + if (prop && (prop->length == 32)) { + const u32 *iprop = prop->value; + + for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++) + qe_firmware_info.vtraps[i] = iprop[i]; + } + + of_node_put(fw); + + return &qe_firmware_info; +} +EXPORT_SYMBOL(qe_get_firmware_info); + diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 0174b3aeef8..b2870b208dd 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -19,6 +19,7 @@ #include <linux/stddef.h> #include <linux/interrupt.h> #include <linux/err.h> +#include <linux/module.h> #include <asm/io.h> #include <asm/immap_qe.h> @@ -41,6 +42,7 @@ u32 ucc_slow_get_qe_cr_subblock(int uccs_num) default: return QE_CR_SUBBLOCK_INVALID; } } +EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock); void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs) { @@ -56,6 +58,7 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs) qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); } +EXPORT_SYMBOL(ucc_slow_graceful_stop_tx); void ucc_slow_stop_tx(struct ucc_slow_private * uccs) { @@ -65,6 +68,7 @@ void ucc_slow_stop_tx(struct ucc_slow_private * uccs) id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); } +EXPORT_SYMBOL(ucc_slow_stop_tx); void ucc_slow_restart_tx(struct ucc_slow_private * uccs) { @@ -74,6 +78,7 @@ void ucc_slow_restart_tx(struct ucc_slow_private * uccs) id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); } +EXPORT_SYMBOL(ucc_slow_restart_tx); void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) { @@ -94,6 +99,7 @@ void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) } out_be32(&us_regs->gumr_l, gumr_l); } +EXPORT_SYMBOL(ucc_slow_enable); void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) { @@ -114,6 +120,7 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) } out_be32(&us_regs->gumr_l, gumr_l); } +EXPORT_SYMBOL(ucc_slow_disable); /* Initialize the UCC for Slow operations * @@ -347,6 +354,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc *uccs_ret = uccs; return 0; } +EXPORT_SYMBOL(ucc_slow_init); void ucc_slow_free(struct ucc_slow_private * uccs) { @@ -366,5 +374,5 @@ void ucc_slow_free(struct ucc_slow_private * uccs) kfree(uccs); } - +EXPORT_SYMBOL(ucc_slow_free); |