diff options
Diffstat (limited to 'arch/powerpc/sysdev')
36 files changed, 1527 insertions, 627 deletions
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 08ce31e612c..1a6f5641ebc 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -6,7 +6,6 @@ mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y) obj-$(CONFIG_PPC_MPC106) += grackle.o -obj-$(CONFIG_PPC_DCR) += dcr.o obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o obj-$(CONFIG_PPC_PMI) += pmi.o obj-$(CONFIG_U3_DART) += dart_iommu.o @@ -16,25 +15,24 @@ obj-$(CONFIG_FSL_PCI) += fsl_pci.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ mv64x60-$(CONFIG_PCI) += mv64x60_pci.o -obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o +obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \ + mv64x60_udbg.o obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o obj-$(CONFIG_AXON_RAM) += axonram.o -# contains only the suspend handler for time -ifeq ($(CONFIG_RTC_CLASS),) -obj-$(CONFIG_PM) += timer.o -endif - ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_83xx) += ipic.o obj-$(CONFIG_4xx) += uic.o +obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o endif # Temporary hack until we have migrated to asm-powerpc ifeq ($(ARCH),powerpc) +obj-$(CONFIG_CPM) += cpm_common.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o +obj-$(CONFIG_PPC_DCR) += dcr.o obj-$(CONFIG_8xx) += mpc8xx_pic.o commproc.o obj-$(CONFIG_UCODE_PATCH) += micropatch.o endif diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index ab037a3a40d..4d3ba63bba7 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -324,11 +324,13 @@ static struct of_device_id axon_ram_device_id[] = { }; static struct of_platform_driver axon_ram_driver = { - .owner = THIS_MODULE, - .name = AXON_RAM_MODULE_NAME, .match_table = axon_ram_device_id, .probe = axon_ram_probe, - .remove = axon_ram_remove + .remove = axon_ram_remove, + .driver = { + .owner = THIS_MODULE, + .name = AXON_RAM_MODULE_NAME, + }, }; /** diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c index dd5417aec1b..f6a63780bbd 100644 --- a/arch/powerpc/sysdev/commproc.c +++ b/arch/powerpc/sysdev/commproc.c @@ -39,18 +39,21 @@ #include <asm/tlbflush.h> #include <asm/rheap.h> #include <asm/prom.h> +#include <asm/cpm.h> #include <asm/fs_pd.h> #define CPM_MAP_SIZE (0x4000) +#ifndef CONFIG_PPC_CPM_NEW_BINDING static void m8xx_cpm_dpinit(void); -static uint host_buffer; /* One page of host buffer */ -static uint host_end; /* end + 1 */ -cpm8xx_t *cpmp; /* Pointer to comm processor space */ -cpic8xx_t *cpic_reg; +#endif +static uint host_buffer; /* One page of host buffer */ +static uint host_end; /* end + 1 */ +cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ +immap_t __iomem *mpc8xx_immr; +static cpic8xx_t __iomem *cpic_reg; -static struct device_node *cpm_pic_node; static struct irq_host *cpm_pic_host; static void cpm_mask_irq(unsigned int irq) @@ -95,11 +98,6 @@ int cpm_get_irq(void) return irq_linear_revmap(cpm_pic_host, cpm_vec); } -static int cpm_pic_host_match(struct irq_host *h, struct device_node *node) -{ - return cpm_pic_node == node; -} - static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { @@ -115,7 +113,7 @@ static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, * and return. This is a no-op function so we don't need any special * tests in the interrupt handler. */ -static irqreturn_t cpm_error_interrupt(int irq, void *dev) +static irqreturn_t cpm_error_interrupt(int irq, void *dev) { return IRQ_HANDLED; } @@ -127,7 +125,6 @@ static struct irqaction cpm_error_irqaction = { }; static struct irq_host_ops cpm_pic_host_ops = { - .match = cpm_pic_host_match, .map = cpm_pic_host_map, }; @@ -140,16 +137,19 @@ unsigned int cpm_pic_init(void) pr_debug("cpm_pic_init\n"); - np = of_find_compatible_node(NULL, "cpm-pic", "CPM"); + np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic"); + if (np == NULL) + np = of_find_compatible_node(NULL, "cpm-pic", "CPM"); if (np == NULL) { printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n"); return sirq; } + ret = of_address_to_resource(np, 0, &res); if (ret) goto end; - cpic_reg = (void *)ioremap(res.start, res.end - res.start + 1); + cpic_reg = ioremap(res.start, res.end - res.start + 1); if (cpic_reg == NULL) goto end; @@ -165,23 +165,24 @@ unsigned int cpm_pic_init(void) out_be32(&cpic_reg->cpic_cimr, 0); - cpm_pic_node = of_node_get(np); - - cpm_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm_pic_host_ops, 64); + cpm_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR, + 64, &cpm_pic_host_ops, 64); if (cpm_pic_host == NULL) { printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); sirq = NO_IRQ; goto end; } - of_node_put(np); /* Install our own error handler. */ - np = of_find_node_by_type(NULL, "cpm"); + np = of_find_compatible_node(NULL, NULL, "fsl,cpm1"); + if (np == NULL) + np = of_find_node_by_type(NULL, "cpm"); if (np == NULL) { printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); goto end; } - eirq= irq_of_parse_and_map(np, 0); + + eirq = irq_of_parse_and_map(np, 0); if (eirq == NO_IRQ) goto end; @@ -195,23 +196,30 @@ end: return sirq; } -void cpm_reset(void) +void __init cpm_reset(void) { - cpm8xx_t *commproc; - sysconf8xx_t *siu_conf; + sysconf8xx_t __iomem *siu_conf; - commproc = (cpm8xx_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); + mpc8xx_immr = ioremap(get_immrbase(), 0x4000); + if (!mpc8xx_immr) { + printk(KERN_CRIT "Could not map IMMR\n"); + return; + } -#ifdef CONFIG_UCODE_PATCH + cpmp = &mpc8xx_immr->im_cpm; + +#ifndef CONFIG_PPC_EARLY_DEBUG_CPM /* Perform a reset. */ - out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); + out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); /* Wait for it. */ - while (in_be16(&commproc->cp_cpcr) & CPM_CR_FLG); + while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG); +#endif - cpm_load_patch(commproc); +#ifdef CONFIG_UCODE_PATCH + cpm_load_patch(cpmp); #endif /* Set SDMA Bus Request priority 5. @@ -220,16 +228,16 @@ void cpm_reset(void) * manual recommends it. * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ - siu_conf = (sysconf8xx_t*)immr_map(im_siu_conf); + siu_conf = immr_map(im_siu_conf); out_be32(&siu_conf->sc_sdcr, 1); immr_unmap(siu_conf); +#ifdef CONFIG_PPC_CPM_NEW_BINDING + cpm_muram_init(); +#else /* Reclaim the DP memory for our use. */ m8xx_cpm_dpinit(); - - /* Tell everyone where the comm processor resides. - */ - cpmp = commproc; +#endif } /* We used to do this earlier, but have to postpone as long as possible @@ -279,22 +287,23 @@ m8xx_cpm_hostalloc(uint size) void cpm_setbrg(uint brg, uint rate) { - volatile uint *bp; + u32 __iomem *bp; /* This is good enough to get SMCs running..... */ - bp = (uint *)&cpmp->cp_brgc1; + bp = &cpmp->cp_brgc1; bp += brg; /* The BRG has a 12-bit counter. For really slow baud rates (or * really fast processors), we may have to further divide by 16. */ if (((BRG_UART_CLK / rate) - 1) < 4096) - *bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN; + out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); else - *bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | - CPM_BRG_EN | CPM_BRG_DIV16; + out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | + CPM_BRG_EN | CPM_BRG_DIV16); } +#ifndef CONFIG_PPC_CPM_NEW_BINDING /* * dpalloc / dpfree bits. */ @@ -307,15 +316,15 @@ static rh_block_t cpm_boot_dpmem_rh_block[16]; static rh_info_t cpm_dpmem_info; #define CPM_DPMEM_ALIGNMENT 8 -static u8* dpram_vbase; -static uint dpram_pbase; +static u8 __iomem *dpram_vbase; +static phys_addr_t dpram_pbase; -void m8xx_cpm_dpinit(void) +static void m8xx_cpm_dpinit(void) { spin_lock_init(&cpm_dpmem_lock); - dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE); - dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem; + dpram_vbase = cpmp->cp_dpmem; + dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem); /* Initialize the info header */ rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT, @@ -391,8 +400,210 @@ void *cpm_dpram_addr(unsigned long offset) } EXPORT_SYMBOL(cpm_dpram_addr); -uint cpm_dpram_phys(u8* addr) +uint cpm_dpram_phys(u8 *addr) { return (dpram_pbase + (uint)(addr - dpram_vbase)); } EXPORT_SYMBOL(cpm_dpram_phys); +#endif /* !CONFIG_PPC_CPM_NEW_BINDING */ + +struct cpm_ioport16 { + __be16 dir, par, sor, dat, intr; + __be16 res[3]; +}; + +struct cpm_ioport32 { + __be32 dir, par, sor; +}; + +static void cpm1_set_pin32(int port, int pin, int flags) +{ + struct cpm_ioport32 __iomem *iop; + pin = 1 << (31 - pin); + + if (port == CPM_PORTB) + iop = (struct cpm_ioport32 __iomem *) + &mpc8xx_immr->im_cpm.cp_pbdir; + else + iop = (struct cpm_ioport32 __iomem *) + &mpc8xx_immr->im_cpm.cp_pedir; + + if (flags & CPM_PIN_OUTPUT) + setbits32(&iop->dir, pin); + else + clrbits32(&iop->dir, pin); + + if (!(flags & CPM_PIN_GPIO)) + setbits32(&iop->par, pin); + else + clrbits32(&iop->par, pin); + + if (port == CPM_PORTE) { + if (flags & CPM_PIN_SECONDARY) + setbits32(&iop->sor, pin); + else + clrbits32(&iop->sor, pin); + + if (flags & CPM_PIN_OPENDRAIN) + setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); + else + clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); + } +} + +static void cpm1_set_pin16(int port, int pin, int flags) +{ + struct cpm_ioport16 __iomem *iop = + (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport; + + pin = 1 << (15 - pin); + + if (port != 0) + iop += port - 1; + + if (flags & CPM_PIN_OUTPUT) + setbits16(&iop->dir, pin); + else + clrbits16(&iop->dir, pin); + + if (!(flags & CPM_PIN_GPIO)) + setbits16(&iop->par, pin); + else + clrbits16(&iop->par, pin); + + if (port == CPM_PORTC) { + if (flags & CPM_PIN_SECONDARY) + setbits16(&iop->sor, pin); + else + clrbits16(&iop->sor, pin); + } +} + +void cpm1_set_pin(enum cpm_port port, int pin, int flags) +{ + if (port == CPM_PORTB || port == CPM_PORTE) + cpm1_set_pin32(port, pin, flags); + else + cpm1_set_pin16(port, pin, flags); +} + +int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) +{ + int shift; + int i, bits = 0; + u32 __iomem *reg; + u32 mask = 7; + + u8 clk_map[][3] = { + {CPM_CLK_SCC1, CPM_BRG1, 0}, + {CPM_CLK_SCC1, CPM_BRG2, 1}, + {CPM_CLK_SCC1, CPM_BRG3, 2}, + {CPM_CLK_SCC1, CPM_BRG4, 3}, + {CPM_CLK_SCC1, CPM_CLK1, 4}, + {CPM_CLK_SCC1, CPM_CLK2, 5}, + {CPM_CLK_SCC1, CPM_CLK3, 6}, + {CPM_CLK_SCC1, CPM_CLK4, 7}, + + {CPM_CLK_SCC2, CPM_BRG1, 0}, + {CPM_CLK_SCC2, CPM_BRG2, 1}, + {CPM_CLK_SCC2, CPM_BRG3, 2}, + {CPM_CLK_SCC2, CPM_BRG4, 3}, + {CPM_CLK_SCC2, CPM_CLK1, 4}, + {CPM_CLK_SCC2, CPM_CLK2, 5}, + {CPM_CLK_SCC2, CPM_CLK3, 6}, + {CPM_CLK_SCC2, CPM_CLK4, 7}, + + {CPM_CLK_SCC3, CPM_BRG1, 0}, + {CPM_CLK_SCC3, CPM_BRG2, 1}, + {CPM_CLK_SCC3, CPM_BRG3, 2}, + {CPM_CLK_SCC3, CPM_BRG4, 3}, + {CPM_CLK_SCC3, CPM_CLK5, 4}, + {CPM_CLK_SCC3, CPM_CLK6, 5}, + {CPM_CLK_SCC3, CPM_CLK7, 6}, + {CPM_CLK_SCC3, CPM_CLK8, 7}, + + {CPM_CLK_SCC4, CPM_BRG1, 0}, + {CPM_CLK_SCC4, CPM_BRG2, 1}, + {CPM_CLK_SCC4, CPM_BRG3, 2}, + {CPM_CLK_SCC4, CPM_BRG4, 3}, + {CPM_CLK_SCC4, CPM_CLK5, 4}, + {CPM_CLK_SCC4, CPM_CLK6, 5}, + {CPM_CLK_SCC4, CPM_CLK7, 6}, + {CPM_CLK_SCC4, CPM_CLK8, 7}, + + {CPM_CLK_SMC1, CPM_BRG1, 0}, + {CPM_CLK_SMC1, CPM_BRG2, 1}, + {CPM_CLK_SMC1, CPM_BRG3, 2}, + {CPM_CLK_SMC1, CPM_BRG4, 3}, + {CPM_CLK_SMC1, CPM_CLK1, 4}, + {CPM_CLK_SMC1, CPM_CLK2, 5}, + {CPM_CLK_SMC1, CPM_CLK3, 6}, + {CPM_CLK_SMC1, CPM_CLK4, 7}, + + {CPM_CLK_SMC2, CPM_BRG1, 0}, + {CPM_CLK_SMC2, CPM_BRG2, 1}, + {CPM_CLK_SMC2, CPM_BRG3, 2}, + {CPM_CLK_SMC2, CPM_BRG4, 3}, + {CPM_CLK_SMC2, CPM_CLK5, 4}, + {CPM_CLK_SMC2, CPM_CLK6, 5}, + {CPM_CLK_SMC2, CPM_CLK7, 6}, + {CPM_CLK_SMC2, CPM_CLK8, 7}, + }; + + switch (target) { + case CPM_CLK_SCC1: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 0; + break; + + case CPM_CLK_SCC2: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 8; + break; + + case CPM_CLK_SCC3: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 16; + break; + + case CPM_CLK_SCC4: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 24; + break; + + case CPM_CLK_SMC1: + reg = &mpc8xx_immr->im_cpm.cp_simode; + shift = 12; + break; + + case CPM_CLK_SMC2: + reg = &mpc8xx_immr->im_cpm.cp_simode; + shift = 28; + break; + + default: + printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n"); + return -EINVAL; + } + + if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX) + shift += 3; + + for (i = 0; i < ARRAY_SIZE(clk_map); i++) { + if (clk_map[i][0] == target && clk_map[i][1] == clock) { + bits = clk_map[i][2]; + break; + } + } + + if (i == ARRAY_SIZE(clk_map)) { + printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n"); + return -EINVAL; + } + + bits <<= shift; + mask <<= shift; + out_be32(reg, (in_be32(reg) & ~mask) | bits); + + return 0; +} diff --git a/arch/powerpc/sysdev/commproc.h b/arch/powerpc/sysdev/commproc.h new file mode 100644 index 00000000000..9155ba46727 --- /dev/null +++ b/arch/powerpc/sysdev/commproc.h @@ -0,0 +1,12 @@ +#ifndef _POWERPC_SYSDEV_COMMPROC_H +#define _POWERPC_SYSDEV_COMMPROC_H + +extern void cpm_reset(void); +extern void mpc8xx_restart(char *cmd); +extern void mpc8xx_calibrate_decr(void); +extern int mpc8xx_set_rtc_time(struct rtc_time *tm); +extern void mpc8xx_get_rtc_time(struct rtc_time *tm); +extern void m8xx_pic_init(void); +extern unsigned int mpc8xx_get_irq(void); + +#endif diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index c827715a509..859362fecb7 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -33,6 +33,8 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/of.h> + #include <asm/io.h> #include <asm/irq.h> #include <asm/mpc8260.h> @@ -44,14 +46,16 @@ #include <sysdev/fsl_soc.h> +#ifndef CONFIG_PPC_CPM_NEW_BINDING static void cpm2_dpinit(void); -cpm_cpm2_t *cpmp; /* Pointer to comm processor space */ +#endif + +cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */ /* We allocate this here because it is used almost exclusively for * the communication processor devices. */ -cpm2_map_t *cpm2_immr; -intctl_cpm2_t *cpm2_intctl; +cpm2_map_t __iomem *cpm2_immr; #define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount of space for CPM as it is larger @@ -60,12 +64,19 @@ intctl_cpm2_t *cpm2_intctl; void cpm2_reset(void) { - cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); - cpm2_intctl = cpm2_map(im_intctl); +#ifdef CONFIG_PPC_85xx + cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); +#else + cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE); +#endif /* Reclaim the DP memory for our use. */ +#ifdef CONFIG_PPC_CPM_NEW_BINDING + cpm_muram_init(); +#else cpm2_dpinit(); +#endif /* Tell everyone where the comm processor resides. */ @@ -91,7 +102,7 @@ cpm2_reset(void) void cpm_setbrg(uint brg, uint rate) { - volatile uint *bp; + u32 __iomem *bp; /* This is good enough to get SMCs running..... */ @@ -113,7 +124,8 @@ cpm_setbrg(uint brg, uint rate) void cpm2_fastbrg(uint brg, uint rate, int div16) { - volatile uint *bp; + u32 __iomem *bp; + u32 val; if (brg < 4) { bp = cpm2_map_size(im_brgc1, 16); @@ -123,10 +135,11 @@ cpm2_fastbrg(uint brg, uint rate, int div16) brg -= 4; } bp += brg; - *bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; if (div16) - *bp |= CPM_BRG_DIV16; + val |= CPM_BRG_DIV16; + out_be32(bp, val); cpm2_unmap(bp); } @@ -135,10 +148,11 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) int ret = 0; int shift; int i, bits = 0; - cpmux_t *im_cpmux; - u32 *reg; + cpmux_t __iomem *im_cpmux; + u32 __iomem *reg; u32 mask = 7; - u8 clk_map [24][3] = { + + u8 clk_map[][3] = { {CPM_CLK_FCC1, CPM_BRG5, 0}, {CPM_CLK_FCC1, CPM_BRG6, 1}, {CPM_CLK_FCC1, CPM_BRG7, 2}, @@ -162,8 +176,40 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) {CPM_CLK_FCC3, CPM_CLK13, 4}, {CPM_CLK_FCC3, CPM_CLK14, 5}, {CPM_CLK_FCC3, CPM_CLK15, 6}, - {CPM_CLK_FCC3, CPM_CLK16, 7} - }; + {CPM_CLK_FCC3, CPM_CLK16, 7}, + {CPM_CLK_SCC1, CPM_BRG1, 0}, + {CPM_CLK_SCC1, CPM_BRG2, 1}, + {CPM_CLK_SCC1, CPM_BRG3, 2}, + {CPM_CLK_SCC1, CPM_BRG4, 3}, + {CPM_CLK_SCC1, CPM_CLK11, 4}, + {CPM_CLK_SCC1, CPM_CLK12, 5}, + {CPM_CLK_SCC1, CPM_CLK3, 6}, + {CPM_CLK_SCC1, CPM_CLK4, 7}, + {CPM_CLK_SCC2, CPM_BRG1, 0}, + {CPM_CLK_SCC2, CPM_BRG2, 1}, + {CPM_CLK_SCC2, CPM_BRG3, 2}, + {CPM_CLK_SCC2, CPM_BRG4, 3}, + {CPM_CLK_SCC2, CPM_CLK11, 4}, + {CPM_CLK_SCC2, CPM_CLK12, 5}, + {CPM_CLK_SCC2, CPM_CLK3, 6}, + {CPM_CLK_SCC2, CPM_CLK4, 7}, + {CPM_CLK_SCC3, CPM_BRG1, 0}, + {CPM_CLK_SCC3, CPM_BRG2, 1}, + {CPM_CLK_SCC3, CPM_BRG3, 2}, + {CPM_CLK_SCC3, CPM_BRG4, 3}, + {CPM_CLK_SCC3, CPM_CLK5, 4}, + {CPM_CLK_SCC3, CPM_CLK6, 5}, + {CPM_CLK_SCC3, CPM_CLK7, 6}, + {CPM_CLK_SCC3, CPM_CLK8, 7}, + {CPM_CLK_SCC4, CPM_BRG1, 0}, + {CPM_CLK_SCC4, CPM_BRG2, 1}, + {CPM_CLK_SCC4, CPM_BRG3, 2}, + {CPM_CLK_SCC4, CPM_BRG4, 3}, + {CPM_CLK_SCC4, CPM_CLK5, 4}, + {CPM_CLK_SCC4, CPM_CLK6, 5}, + {CPM_CLK_SCC4, CPM_CLK7, 6}, + {CPM_CLK_SCC4, CPM_CLK8, 7}, + }; im_cpmux = cpm2_map(im_cpmux); @@ -201,25 +247,83 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) } if (mode == CPM_CLK_RX) - shift +=3; + shift += 3; - for (i=0; i<24; i++) { + for (i = 0; i < ARRAY_SIZE(clk_map); i++) { if (clk_map[i][0] == target && clk_map[i][1] == clock) { bits = clk_map[i][2]; break; } } - if (i == sizeof(clk_map)/3) + if (i == ARRAY_SIZE(clk_map)) ret = -EINVAL; bits <<= shift; mask <<= shift; + out_be32(reg, (in_be32(reg) & ~mask) | bits); cpm2_unmap(im_cpmux); return ret; } +int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock) +{ + int ret = 0; + int shift; + int i, bits = 0; + cpmux_t __iomem *im_cpmux; + u8 __iomem *reg; + u8 mask = 3; + + u8 clk_map[][3] = { + {CPM_CLK_SMC1, CPM_BRG1, 0}, + {CPM_CLK_SMC1, CPM_BRG7, 1}, + {CPM_CLK_SMC1, CPM_CLK7, 2}, + {CPM_CLK_SMC1, CPM_CLK9, 3}, + {CPM_CLK_SMC2, CPM_BRG2, 0}, + {CPM_CLK_SMC2, CPM_BRG8, 1}, + {CPM_CLK_SMC2, CPM_CLK4, 2}, + {CPM_CLK_SMC2, CPM_CLK15, 3}, + }; + + im_cpmux = cpm2_map(im_cpmux); + + switch (target) { + case CPM_CLK_SMC1: + reg = &im_cpmux->cmx_smr; + mask = 3; + shift = 4; + break; + case CPM_CLK_SMC2: + reg = &im_cpmux->cmx_smr; + mask = 3; + shift = 0; + break; + default: + printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(clk_map); i++) { + if (clk_map[i][0] == target && clk_map[i][1] == clock) { + bits = clk_map[i][2]; + break; + } + } + if (i == ARRAY_SIZE(clk_map)) + ret = -EINVAL; + + bits <<= shift; + mask <<= shift; + + out_8(reg, (in_8(reg) & ~mask) | bits); + + cpm2_unmap(im_cpmux); + return ret; +} + +#ifndef CONFIG_PPC_CPM_NEW_BINDING /* * dpalloc / dpfree bits. */ @@ -228,20 +332,20 @@ static spinlock_t cpm_dpmem_lock; * until the memory subsystem goes up... */ static rh_block_t cpm_boot_dpmem_rh_block[16]; static rh_info_t cpm_dpmem_info; -static u8* im_dprambase; +static u8 __iomem *im_dprambase; static void cpm2_dpinit(void) { spin_lock_init(&cpm_dpmem_lock); - im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE); - /* initialize the info header */ rh_init(&cpm_dpmem_info, 1, sizeof(cpm_boot_dpmem_rh_block) / sizeof(cpm_boot_dpmem_rh_block[0]), cpm_boot_dpmem_rh_block); + im_dprambase = cpm2_immr; + /* Attach the usable dpmem area */ /* XXX: This is actually crap. CPM_DATAONLY_BASE and * CPM_DATAONLY_SIZE is only a subset of the available dpram. It @@ -306,3 +410,37 @@ void *cpm_dpram_addr(unsigned long offset) return (void *)(im_dprambase + offset); } EXPORT_SYMBOL(cpm_dpram_addr); +#endif /* !CONFIG_PPC_CPM_NEW_BINDING */ + +struct cpm2_ioports { + u32 dir, par, sor, odr, dat; + u32 res[3]; +}; + +void cpm2_set_pin(int port, int pin, int flags) +{ + struct cpm2_ioports __iomem *iop = + (struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport; + + pin = 1 << (31 - pin); + + if (flags & CPM_PIN_OUTPUT) + setbits32(&iop[port].dir, pin); + else + clrbits32(&iop[port].dir, pin); + + if (!(flags & CPM_PIN_GPIO)) + setbits32(&iop[port].par, pin); + else + clrbits32(&iop[port].par, pin); + + if (flags & CPM_PIN_SECONDARY) + setbits32(&iop[port].sor, pin); + else + clrbits32(&iop[port].sor, pin); + + if (flags & CPM_PIN_OPENDRAIN) + setbits32(&iop[port].odr, pin); + else + clrbits32(&iop[port].odr, pin); +} diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index eabfe06fe05..5fe65b2f8f3 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -48,9 +48,8 @@ #define CPM2_IRQ_PORTC15 48 #define CPM2_IRQ_PORTC0 63 -static intctl_cpm2_t *cpm2_intctl; +static intctl_cpm2_t __iomem *cpm2_intctl; -static struct device_node *cpm2_pic_node; static struct irq_host *cpm2_pic_host; #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; @@ -206,11 +205,6 @@ unsigned int cpm2_get_irq(void) return irq_linear_revmap(cpm2_pic_host, irq); } -static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node) -{ - return cpm2_pic_node == node; -} - static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { @@ -234,7 +228,6 @@ static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct, } static struct irq_host_ops cpm2_pic_host_ops = { - .match = cpm2_pic_host_match, .map = cpm2_pic_host_map, .xlate = cpm2_pic_host_xlate, }; @@ -273,8 +266,8 @@ void cpm2_pic_init(struct device_node *node) out_be32(&cpm2_intctl->ic_scprrl, 0x05309770); /* create a legacy host */ - cpm2_pic_node = of_node_get(node); - cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64); + cpm2_pic_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR, + 64, &cpm2_pic_host_ops, 64); if (cpm2_pic_host == NULL) { printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); return; diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c new file mode 100644 index 00000000000..66c8ad4cfce --- /dev/null +++ b/arch/powerpc/sysdev/cpm_common.c @@ -0,0 +1,205 @@ +/* + * Common CPM code + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright 2007 Freescale Semiconductor, Inc. + * + * Some parts derived from commproc.c/cpm2_common.c, which is: + * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) + * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com> + * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/of_device.h> + +#include <asm/udbg.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/rheap.h> +#include <asm/cpm.h> + +#include <mm/mmu_decl.h> + +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM +static u32 __iomem *cpm_udbg_txdesc = + (u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR; + +static void udbg_putc_cpm(char c) +{ + u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]); + + if (c == '\n') + udbg_putc('\r'); + + while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000) + ; + + out_8(txbuf, c); + out_be32(&cpm_udbg_txdesc[0], 0xa0000001); +} + +void __init udbg_init_cpm(void) +{ + if (cpm_udbg_txdesc) { +#ifdef CONFIG_CPM2 + setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO); +#endif + udbg_putc = udbg_putc_cpm; + udbg_putc('X'); + } +} +#endif + +#ifdef CONFIG_PPC_CPM_NEW_BINDING +static spinlock_t cpm_muram_lock; +static rh_block_t cpm_boot_muram_rh_block[16]; +static rh_info_t cpm_muram_info; +static u8 __iomem *muram_vbase; +static phys_addr_t muram_pbase; + +/* Max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 + +int __init cpm_muram_init(void) +{ + struct device_node *np; + struct resource r; + u32 zero[OF_MAX_ADDR_CELLS] = {}; + resource_size_t max = 0; + int i = 0; + int ret = 0; + + printk("cpm_muram_init\n"); + + spin_lock_init(&cpm_muram_lock); + /* initialize the info header */ + rh_init(&cpm_muram_info, 1, + sizeof(cpm_boot_muram_rh_block) / + sizeof(cpm_boot_muram_rh_block[0]), + cpm_boot_muram_rh_block); + + np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data"); + if (!np) { + printk(KERN_ERR "Cannot find CPM muram data node"); + ret = -ENODEV; + goto out; + } + + muram_pbase = of_translate_address(np, zero); + if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) { + printk(KERN_ERR "Cannot translate zero through CPM muram node"); + ret = -ENODEV; + goto out; + } + + while (of_address_to_resource(np, i++, &r) == 0) { + if (r.end > max) + max = r.end; + + rh_attach_region(&cpm_muram_info, r.start - muram_pbase, + r.end - r.start + 1); + } + + muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1); + if (!muram_vbase) { + printk(KERN_ERR "Cannot map CPM muram"); + ret = -ENOMEM; + } + +out: + of_node_put(np); + return ret; +} + +/** + * cpm_muram_alloc - allocate the requested size worth of multi-user ram + * @size: number of bytes to allocate + * @align: requested alignment, in bytes + * + * This function returns an offset into the muram area. + * Use cpm_dpram_addr() to get the virtual address of the area. + * Use cpm_muram_free() to free the allocation. + */ +unsigned long cpm_muram_alloc(unsigned long size, unsigned long align) +{ + unsigned long start; + unsigned long flags; + + spin_lock_irqsave(&cpm_muram_lock, flags); + cpm_muram_info.alignment = align; + start = rh_alloc(&cpm_muram_info, size, "commproc"); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + + return start; +} +EXPORT_SYMBOL(cpm_muram_alloc); + +/** + * cpm_muram_free - free a chunk of multi-user ram + * @offset: The beginning of the chunk as returned by cpm_muram_alloc(). + */ +int cpm_muram_free(unsigned long offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&cpm_muram_lock, flags); + ret = rh_free(&cpm_muram_info, offset); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + + return ret; +} +EXPORT_SYMBOL(cpm_muram_free); + +/** + * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram + * @offset: the offset into the muram area to reserve + * @size: the number of bytes to reserve + * + * This function returns "start" on success, -ENOMEM on failure. + * Use cpm_dpram_addr() to get the virtual address of the area. + * Use cpm_muram_free() to free the allocation. + */ +unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size) +{ + unsigned long start; + unsigned long flags; + + spin_lock_irqsave(&cpm_muram_lock, flags); + cpm_muram_info.alignment = 1; + start = rh_alloc_fixed(&cpm_muram_info, offset, size, "commproc"); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + + return start; +} +EXPORT_SYMBOL(cpm_muram_alloc_fixed); + +/** + * cpm_muram_addr - turn a muram offset into a virtual address + * @offset: muram offset to convert + */ +void __iomem *cpm_muram_addr(unsigned long offset) +{ + return muram_vbase + offset; +} +EXPORT_SYMBOL(cpm_muram_addr); + +/** + * cpm_muram_phys - turn a muram virtual address into a DMA address + * @offset: virtual address from cpm_muram_addr() to convert + */ +dma_addr_t cpm_muram_dma(void __iomem *addr) +{ + return muram_pbase + ((u8 __iomem *)addr - muram_vbase); +} +EXPORT_SYMBOL(cpm_muram_dma); + +#endif /* CONFIG_PPC_CPM_NEW_BINDING */ diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index a1d2042bb30..e0e24b01e3a 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -204,7 +204,7 @@ static void dart_free(struct iommu_table *tbl, long index, long npages) } -static int dart_init(struct device_node *dart_node) +static int __init dart_init(struct device_node *dart_node) { unsigned int i; unsigned long tmp, base, size; @@ -313,7 +313,7 @@ static void pci_dma_bus_setup_dart(struct pci_bus *bus) PCI_DN(dn)->iommu_table = &iommu_table_dart; } -void iommu_init_early_dart(void) +void __init iommu_init_early_dart(void) { struct device_node *dn; diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c index 574b6ef44e0..ab11c0b2902 100644 --- a/arch/powerpc/sysdev/dcr.c +++ b/arch/powerpc/sysdev/dcr.c @@ -33,6 +33,7 @@ unsigned int dcr_resource_start(struct device_node *np, unsigned int index) return dr[index * 2]; } +EXPORT_SYMBOL_GPL(dcr_resource_start); unsigned int dcr_resource_len(struct device_node *np, unsigned int index) { @@ -44,6 +45,7 @@ unsigned int dcr_resource_len(struct device_node *np, unsigned int index) return dr[index * 2 + 1]; } +EXPORT_SYMBOL_GPL(dcr_resource_len); #ifndef CONFIG_PPC_DCR_NATIVE @@ -102,7 +104,7 @@ u64 of_translate_dcr_address(struct device_node *dev, dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, unsigned int dcr_c) { - dcr_host_t ret = { .token = NULL, .stride = 0 }; + dcr_host_t ret = { .token = NULL, .stride = 0, .base = dcr_n }; u64 addr; pr_debug("dcr_map(%s, 0x%x, 0x%x)\n", @@ -122,6 +124,7 @@ dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, ret.token -= dcr_n * ret.stride; return ret; } +EXPORT_SYMBOL_GPL(dcr_map); void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c) { @@ -133,5 +136,6 @@ void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c) iounmap(h.token); h.token = NULL; } +EXPORT_SYMBOL_GPL(dcr_unmap); #endif /* !defined(CONFIG_PPC_DCR_NATIVE) */ diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 114c90f8f56..af090c93be1 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -160,8 +160,8 @@ static void __init quirk_fsl_pcie_transparent(struct pci_dev *dev) int __init fsl_pcie_check_link(struct pci_controller *hose) { - u16 val; - early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val); + u32 val; + early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); if (val < PCIE_LTSSM_L0) return 1; return 0; @@ -255,5 +255,8 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transpare DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_transparent) +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_transparent); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 1cf29c9d440..3ace7474809 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -24,6 +24,7 @@ #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/phy.h> +#include <linux/spi/spi.h> #include <linux/fsl_devices.h> #include <linux/fs_enet_pd.h> #include <linux/fs_uart_pd.h> @@ -52,13 +53,13 @@ phys_addr_t get_immrbase(void) soc = of_find_node_by_type(NULL, "soc"); if (soc) { - unsigned int size; + int size; const void *prop = of_get_property(soc, "reg", &size); if (prop) immrbase = of_translate_address(soc, prop); of_node_put(soc); - }; + } return immrbase; } @@ -72,20 +73,31 @@ static u32 brgfreq = -1; u32 get_brgfreq(void) { struct device_node *node; + const unsigned int *prop; + int size; if (brgfreq != -1) return brgfreq; - node = of_find_node_by_type(NULL, "cpm"); + node = of_find_compatible_node(NULL, NULL, "fsl,cpm-brg"); if (node) { - unsigned int size; - const unsigned int *prop = of_get_property(node, - "brg-frequency", &size); + prop = of_get_property(node, "clock-frequency", &size); + if (prop && size == 4) + brgfreq = *prop; - if (prop) + of_node_put(node); + return brgfreq; + } + + /* Legacy device binding -- will go away when no users are left. */ + node = of_find_node_by_type(NULL, "cpm"); + if (node) { + prop = of_get_property(node, "brg-frequency", &size); + if (prop && size == 4) brgfreq = *prop; + of_node_put(node); - }; + } return brgfreq; } @@ -103,14 +115,14 @@ u32 get_baudrate(void) node = of_find_node_by_type(NULL, "serial"); if (node) { - unsigned int size; + int size; const unsigned int *prop = of_get_property(node, "current-speed", &size); if (prop) fs_baudrate = *prop; of_node_put(node); - }; + } return fs_baudrate; } @@ -319,34 +331,46 @@ static struct i2c_driver_device i2c_devices[] __initdata = { {"ricoh,rs5c372b", "rtc-rs5c372", "rs5c372b",}, {"ricoh,rv5c386", "rtc-rs5c372", "rv5c386",}, {"ricoh,rv5c387a", "rtc-rs5c372", "rv5c387a",}, + {"dallas,ds1307", "rtc-ds1307", "ds1307",}, + {"dallas,ds1337", "rtc-ds1307", "ds1337",}, + {"dallas,ds1338", "rtc-ds1307", "ds1338",}, + {"dallas,ds1339", "rtc-ds1307", "ds1339",}, + {"dallas,ds1340", "rtc-ds1307", "ds1340",}, + {"stm,m41t00", "rtc-ds1307", "m41t00"}, + {"dallas,ds1374", "rtc-ds1374", "rtc-ds1374",}, }; -static int __init of_find_i2c_driver(struct device_node *node, struct i2c_board_info *info) +static int __init of_find_i2c_driver(struct device_node *node, + struct i2c_board_info *info) { int i; for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) { if (!of_device_is_compatible(node, i2c_devices[i].of_device)) continue; - strncpy(info->driver_name, i2c_devices[i].i2c_driver, KOBJ_NAME_LEN); - strncpy(info->type, i2c_devices[i].i2c_type, I2C_NAME_SIZE); + if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver, + KOBJ_NAME_LEN) >= KOBJ_NAME_LEN || + strlcpy(info->type, i2c_devices[i].i2c_type, + I2C_NAME_SIZE) >= I2C_NAME_SIZE) + return -ENOMEM; return 0; } return -ENODEV; } -static void __init of_register_i2c_devices(struct device_node *adap_node, int bus_num) +static void __init of_register_i2c_devices(struct device_node *adap_node, + int bus_num) { struct device_node *node = NULL; while ((node = of_get_next_child(adap_node, node))) { - struct i2c_board_info info; + struct i2c_board_info info = {}; const u32 *addr; int len; addr = of_get_property(node, "reg", &len); if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) { - printk(KERN_WARNING "fsl_ioc.c: invalid i2c device entry\n"); + printk(KERN_WARNING "fsl_soc.c: invalid i2c device entry\n"); continue; } @@ -357,7 +381,6 @@ static void __init of_register_i2c_devices(struct device_node *adap_node, int bu if (of_find_i2c_driver(node, &info) < 0) continue; - info.platform_data = NULL; info.addr = *addr; i2c_register_board_info(bus_num, &info, 1); @@ -648,6 +671,7 @@ err: arch_initcall(fsl_usb_of_init); +#ifndef CONFIG_PPC_CPM_NEW_BINDING #ifdef CONFIG_CPM2 extern void init_scc_ioports(struct fs_uart_platform_info*); @@ -1187,3 +1211,132 @@ err: arch_initcall(cpm_smc_uart_of_init); #endif /* CONFIG_8xx */ +#endif /* CONFIG_PPC_CPM_NEW_BINDING */ + +int __init fsl_spi_init(struct spi_board_info *board_infos, + unsigned int num_board_infos, + void (*activate_cs)(u8 cs, u8 polarity), + void (*deactivate_cs)(u8 cs, u8 polarity)) +{ + struct device_node *np; + unsigned int i; + const u32 *sysclk; + + /* SPI controller is either clocked from QE or SoC clock */ + np = of_find_node_by_type(NULL, "qe"); + if (!np) + np = of_find_node_by_type(NULL, "soc"); + + if (!np) + return -ENODEV; + + sysclk = of_get_property(np, "bus-frequency", NULL); + if (!sysclk) + return -ENODEV; + + for (np = NULL, i = 1; + (np = of_find_compatible_node(np, "spi", "fsl_spi")) != NULL; + i++) { + int ret = 0; + unsigned int j; + const void *prop; + struct resource res[2]; + struct platform_device *pdev; + struct fsl_spi_platform_data pdata = { + .activate_cs = activate_cs, + .deactivate_cs = deactivate_cs, + }; + + memset(res, 0, sizeof(res)); + + pdata.sysclk = *sysclk; + + prop = of_get_property(np, "reg", NULL); + if (!prop) + goto err; + pdata.bus_num = *(u32 *)prop; + + prop = of_get_property(np, "mode", NULL); + if (prop && !strcmp(prop, "cpu-qe")) + pdata.qe_mode = 1; + + for (j = 0; j < num_board_infos; j++) { + if (board_infos[j].bus_num == pdata.bus_num) + pdata.max_chipselect++; + } + + if (!pdata.max_chipselect) + goto err; + + ret = of_address_to_resource(np, 0, &res[0]); + if (ret) + goto err; + + ret = of_irq_to_resource(np, 0, &res[1]); + if (ret == NO_IRQ) + goto err; + + pdev = platform_device_alloc("mpc83xx_spi", i); + if (!pdev) + goto err; + + ret = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (ret) + goto unreg; + + ret = platform_device_add_resources(pdev, res, + ARRAY_SIZE(res)); + if (ret) + goto unreg; + + ret = platform_device_register(pdev); + if (ret) + goto unreg; + + continue; +unreg: + platform_device_del(pdev); +err: + continue; + } + + return spi_register_board_info(board_infos, num_board_infos); +} + +#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) +static __be32 __iomem *rstcr; + +static int __init setup_rstcr(void) +{ + struct device_node *np; + np = of_find_node_by_name(NULL, "global-utilities"); + if ((np && of_get_property(np, "fsl,has-rstcr", NULL))) { + const u32 *prop = of_get_property(np, "reg", NULL); + if (prop) { + /* map reset control register + * 0xE00B0 is offset of reset control register + */ + rstcr = ioremap(get_immrbase() + *prop + 0xB0, 0xff); + if (!rstcr) + printk (KERN_EMERG "Error: reset control " + "register not mapped!\n"); + } + } else + printk (KERN_INFO "rstcr compatible register does not exist!\n"); + if (np) + of_node_put(np); + return 0; +} + +arch_initcall(setup_rstcr); + +void fsl_rstcr_restart(char *cmd) +{ + local_irq_disable(); + if (rstcr) + /* set reset control register */ + out_be32(rstcr, 0x2); /* HRESET_REQ */ + + while (1) ; +} +#endif diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 04e145b5fc3..63e7db30a4c 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -8,5 +8,13 @@ extern phys_addr_t get_immrbase(void); extern u32 get_brgfreq(void); extern u32 get_baudrate(void); +struct spi_board_info; + +extern int fsl_spi_init(struct spi_board_info *board_infos, + unsigned int num_board_infos, + void (*activate_cs)(u8 cs, u8 polarity), + void (*deactivate_cs)(u8 cs, u8 polarity)); + +extern void fsl_rstcr_restart(char *cmd); #endif #endif diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index ad87adc975b..7c1b27ac7d3 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -25,7 +25,6 @@ static unsigned char cached_8259[2] = { 0xff, 0xff }; static DEFINE_SPINLOCK(i8259_lock); -static struct device_node *i8259_node; static struct irq_host *i8259_host; /* @@ -165,7 +164,7 @@ static struct resource pic_edgectrl_iores = { static int i8259_host_match(struct irq_host *h, struct device_node *node) { - return i8259_node == NULL || i8259_node == node; + return h->of_node == NULL || h->of_node == node; } static int i8259_host_map(struct irq_host *h, unsigned int virq, @@ -276,9 +275,8 @@ void i8259_init(struct device_node *node, unsigned long intack_addr) spin_unlock_irqrestore(&i8259_lock, flags); /* create a legacy host */ - if (node) - i8259_node = of_node_get(node); - i8259_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &i8259_host_ops, 0); + i8259_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LEGACY, + 0, &i8259_host_ops, 0); if (i8259_host == NULL) { printk(KERN_ERR "i8259: failed to allocate irq host !\n"); return; diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c index 5294560c7b0..cfbd2aae93e 100644 --- a/arch/powerpc/sysdev/indirect_pci.c +++ b/arch/powerpc/sysdev/indirect_pci.c @@ -144,14 +144,16 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops indirect_pci_ops = { - indirect_read_config, - indirect_write_config + .read = indirect_read_config, + .write = indirect_write_config, }; void __init -setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data, u32 flags) +setup_indirect_pci(struct pci_controller* hose, + resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags) { - unsigned long base = cfg_addr & PAGE_MASK; + resource_size_t base = cfg_addr & PAGE_MASK; void __iomem *mbase; mbase = ioremap(base, PAGE_SIZE); diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 473c415e9e2..05a56e55804 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -511,10 +511,8 @@ static struct irq_chip ipic_irq_chip = { static int ipic_host_match(struct irq_host *h, struct device_node *node) { - struct ipic *ipic = h->host_data; - /* Exact match, unless ipic node is NULL */ - return ipic->of_node == NULL || ipic->of_node == node; + return h->of_node == NULL || h->of_node == node; } static int ipic_host_map(struct irq_host *h, unsigned int virq, @@ -568,9 +566,8 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) return NULL; memset(ipic, 0, sizeof(struct ipic)); - ipic->of_node = of_node_get(node); - ipic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + ipic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR, NR_IPIC_INTS, &ipic_host_ops, 0); if (ipic->irqhost == NULL) { diff --git a/arch/powerpc/sysdev/ipic.h b/arch/powerpc/sysdev/ipic.h index c28e589877e..bb309a501b2 100644 --- a/arch/powerpc/sysdev/ipic.h +++ b/arch/powerpc/sysdev/ipic.h @@ -48,9 +48,6 @@ struct ipic { /* The "linux" controller struct */ struct irq_chip hc_irq; - - /* The device node of the interrupt controller */ - struct device_node *of_node; }; struct ipic_info { diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c index 2fc2bcd79b5..7aa4ff5f5ec 100644 --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -19,11 +19,10 @@ extern int cpm_get_irq(struct pt_regs *regs); -static struct device_node *mpc8xx_pic_node; static struct irq_host *mpc8xx_pic_host; #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -static sysconf8xx_t *siu_reg; +static sysconf8xx_t __iomem *siu_reg; int cpm_get_irq(struct pt_regs *regs); @@ -120,11 +119,6 @@ unsigned int mpc8xx_get_irq(void) } -static int mpc8xx_pic_host_match(struct irq_host *h, struct device_node *node) -{ - return mpc8xx_pic_node == node; -} - static int mpc8xx_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { @@ -158,7 +152,6 @@ static int mpc8xx_pic_host_xlate(struct irq_host *h, struct device_node *ct, static struct irq_host_ops mpc8xx_pic_host_ops = { - .match = mpc8xx_pic_host_match, .map = mpc8xx_pic_host_map, .xlate = mpc8xx_pic_host_xlate, }; @@ -166,32 +159,33 @@ static struct irq_host_ops mpc8xx_pic_host_ops = { int mpc8xx_pic_init(void) { struct resource res; - struct device_node *np = NULL; + struct device_node *np; int ret; - np = of_find_node_by_type(np, "mpc8xx-pic"); - + np = of_find_compatible_node(NULL, NULL, "fsl,pq1-pic"); + if (np == NULL) + np = of_find_node_by_type(NULL, "mpc8xx-pic"); if (np == NULL) { - printk(KERN_ERR "Could not find open-pic node\n"); + printk(KERN_ERR "Could not find fsl,pq1-pic node\n"); return -ENOMEM; } - mpc8xx_pic_node = of_node_get(np); - ret = of_address_to_resource(np, 0, &res); - of_node_put(np); if (ret) - return ret; + goto out; - siu_reg = (void *)ioremap(res.start, res.end - res.start + 1); + siu_reg = ioremap(res.start, res.end - res.start + 1); if (siu_reg == NULL) return -EINVAL; - mpc8xx_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &mpc8xx_pic_host_ops, 64); + mpc8xx_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR, + 64, &mpc8xx_pic_host_ops, 64); if (mpc8xx_pic_host == NULL) { printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n"); ret = -ENOMEM; } +out: + of_node_put(np); return ret; } diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 74c64c0d3b7..893e65439e8 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -156,8 +156,7 @@ static inline u32 _mpic_read(enum mpic_reg_type type, switch(type) { #ifdef CONFIG_PPC_DCR case mpic_access_dcr: - return dcr_read(rb->dhost, - rb->dbase + reg + rb->doff); + return dcr_read(rb->dhost, rb->dhost.base + reg); #endif case mpic_access_mmio_be: return in_be32(rb->base + (reg >> 2)); @@ -174,8 +173,7 @@ static inline void _mpic_write(enum mpic_reg_type type, switch(type) { #ifdef CONFIG_PPC_DCR case mpic_access_dcr: - return dcr_write(rb->dhost, - rb->dbase + reg + rb->doff, value); + return dcr_write(rb->dhost, rb->dhost.base + reg, value); #endif case mpic_access_mmio_be: return out_be32(rb->base + (reg >> 2), value); @@ -228,8 +226,13 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne unsigned int isu = src_no >> mpic->isu_shift; unsigned int idx = src_no & mpic->isu_mask; - return _mpic_read(mpic->reg_type, &mpic->isus[isu], - reg + (idx * MPIC_INFO(IRQ_STRIDE))); +#ifdef CONFIG_MPIC_BROKEN_REGREAD + if (reg == 0) + return mpic->isu_reg0_shadow[idx]; + else +#endif + return _mpic_read(mpic->reg_type, &mpic->isus[isu], + reg + (idx * MPIC_INFO(IRQ_STRIDE))); } static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, @@ -240,6 +243,11 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, _mpic_write(mpic->reg_type, &mpic->isus[isu], reg + (idx * MPIC_INFO(IRQ_STRIDE)), value); + +#ifdef CONFIG_MPIC_BROKEN_REGREAD + if (reg == 0) + mpic->isu_reg0_shadow[idx] = value; +#endif } #define mpic_read(b,r) _mpic_read(mpic->reg_type,&(b),(r)) @@ -269,9 +277,11 @@ static void _mpic_map_mmio(struct mpic *mpic, unsigned long phys_addr, static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb, unsigned int offset, unsigned int size) { - rb->dbase = mpic->dcr_base; - rb->doff = offset; - rb->dhost = dcr_map(mpic->of_node, rb->dbase + rb->doff, size); + const u32 *dbasep; + + dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL); + + rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size); BUG_ON(!DCR_MAP_OK(rb->dhost)); } @@ -758,7 +768,7 @@ static void mpic_end_ipi(unsigned int irq) #endif /* CONFIG_SMP */ -static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask) +void mpic_set_affinity(unsigned int irq, cpumask_t cpumask) { struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); @@ -861,10 +871,8 @@ static struct irq_chip mpic_irq_ht_chip = { static int mpic_host_match(struct irq_host *h, struct device_node *node) { - struct mpic *mpic = h->host_data; - /* Exact match, unless mpic node is NULL */ - return mpic->of_node == NULL || mpic->of_node == node; + return h->of_node == NULL || h->of_node == node; } static int mpic_host_map(struct irq_host *h, unsigned int virq, @@ -985,10 +993,9 @@ struct mpic * __init mpic_alloc(struct device_node *node, memset(mpic, 0, sizeof(struct mpic)); mpic->name = name; - mpic->of_node = of_node_get(node); - mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, isu_size, - &mpic_host_ops, + mpic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR, + isu_size, &mpic_host_ops, flags & MPIC_LARGE_VECTORS ? 2048 : 256); if (mpic->irqhost == NULL) { of_node_put(node); @@ -1068,20 +1075,14 @@ struct mpic * __init mpic_alloc(struct device_node *node, BUG_ON(paddr == 0 && node == NULL); /* If no physical address passed in, check if it's dcr based */ - if (paddr == 0 && of_get_property(node, "dcr-reg", NULL) != NULL) - mpic->flags |= MPIC_USES_DCR; - + if (paddr == 0 && of_get_property(node, "dcr-reg", NULL) != NULL) { #ifdef CONFIG_PPC_DCR - if (mpic->flags & MPIC_USES_DCR) { - const u32 *dbasep; - dbasep = of_get_property(node, "dcr-reg", NULL); - BUG_ON(dbasep == NULL); - mpic->dcr_base = *dbasep; + mpic->flags |= MPIC_USES_DCR; mpic->reg_type = mpic_access_dcr; - } #else - BUG_ON (mpic->flags & MPIC_USES_DCR); + BUG(); #endif /* CONFIG_PPC_DCR */ + } /* If the MPIC is not DCR based, and no physical address was passed * in, try to obtain one diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h index 3a1c3d2c594..1cb6bd84102 100644 --- a/arch/powerpc/sysdev/mpic.h +++ b/arch/powerpc/sysdev/mpic.h @@ -34,5 +34,6 @@ extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type); extern void mpic_end_irq(unsigned int irq); extern void mpic_mask_irq(unsigned int irq); extern void mpic_unmask_irq(unsigned int irq); +extern void mpic_set_affinity(unsigned int irq, cpumask_t cpumask); #endif /* _POWERPC_SYSDEV_MPIC_H */ diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c index b076793033c..d272a52ecd2 100644 --- a/arch/powerpc/sysdev/mpic_msi.c +++ b/arch/powerpc/sysdev/mpic_msi.c @@ -9,7 +9,6 @@ */ #include <linux/irq.h> -#include <linux/bootmem.h> #include <linux/bitmap.h> #include <linux/msi.h> #include <asm/mpic.h> @@ -117,16 +116,17 @@ static int mpic_msi_reserve_dt_hwirqs(struct mpic *mpic) int i, len; const u32 *p; - p = of_get_property(mpic->of_node, "msi-available-ranges", &len); + p = of_get_property(mpic->irqhost->of_node, + "msi-available-ranges", &len); if (!p) { pr_debug("mpic: no msi-available-ranges property found on %s\n", - mpic->of_node->full_name); + mpic->irqhost->of_node->full_name); return -ENODEV; } if (len % 8 != 0) { printk(KERN_WARNING "mpic: Malformed msi-available-ranges " - "property on %s\n", mpic->of_node->full_name); + "property on %s\n", mpic->irqhost->of_node->full_name); return -EINVAL; } @@ -151,10 +151,7 @@ int mpic_msi_init_allocator(struct mpic *mpic) size = BITS_TO_LONGS(mpic->irq_count) * sizeof(long); pr_debug("mpic: allocator bitmap size is 0x%x bytes\n", size); - if (mem_init_done) - mpic->hwirq_bitmap = kmalloc(size, GFP_KERNEL); - else - mpic->hwirq_bitmap = alloc_bootmem(size); + mpic->hwirq_bitmap = alloc_maybe_bootmem(size, GFP_KERNEL); if (!mpic->hwirq_bitmap) { pr_debug("mpic: ENOMEM allocating allocator bitmap!\n"); diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c index 305b864c25d..1d5a40899b7 100644 --- a/arch/powerpc/sysdev/mpic_u3msi.c +++ b/arch/powerpc/sysdev/mpic_u3msi.c @@ -40,6 +40,7 @@ static struct irq_chip mpic_u3msi_chip = { .unmask = mpic_u3msi_unmask_irq, .eoi = mpic_end_irq, .set_type = mpic_set_irq_type, + .set_affinity = mpic_set_affinity, .typename = "MPIC-U3MSI", }; @@ -107,59 +108,46 @@ static void u3msi_teardown_msi_irqs(struct pci_dev *pdev) return; } -static void u3msi_compose_msi_msg(struct pci_dev *pdev, int virq, - struct msi_msg *msg) -{ - u64 addr; - - addr = find_ht_magic_addr(pdev); - msg->address_lo = addr & 0xFFFFFFFF; - msg->address_hi = addr >> 32; - msg->data = virq_to_hw(virq); - - pr_debug("u3msi: allocated virq 0x%x (hw 0x%lx) at address 0x%lx\n", - virq, virq_to_hw(virq), addr); -} - static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) { irq_hw_number_t hwirq; - int rc; unsigned int virq; struct msi_desc *entry; struct msi_msg msg; + u64 addr; + + addr = find_ht_magic_addr(pdev); + msg.address_lo = addr & 0xFFFFFFFF; + msg.address_hi = addr >> 32; list_for_each_entry(entry, &pdev->msi_list, list) { hwirq = mpic_msi_alloc_hwirqs(msi_mpic, 1); if (hwirq < 0) { - rc = hwirq; pr_debug("u3msi: failed allocating hwirq\n"); - goto out_free; + return hwirq; } virq = irq_create_mapping(msi_mpic->irqhost, hwirq); if (virq == NO_IRQ) { pr_debug("u3msi: failed mapping hwirq 0x%lx\n", hwirq); mpic_msi_free_hwirqs(msi_mpic, hwirq, 1); - rc = -ENOSPC; - goto out_free; + return -ENOSPC; } set_irq_msi(virq, entry); set_irq_chip(virq, &mpic_u3msi_chip); set_irq_type(virq, IRQ_TYPE_EDGE_RISING); - u3msi_compose_msi_msg(pdev, virq, &msg); + pr_debug("u3msi: allocated virq 0x%x (hw 0x%lx) addr 0x%lx\n", + virq, hwirq, addr); + + msg.data = hwirq; write_msi_msg(virq, &msg); hwirq++; } return 0; - - out_free: - u3msi_teardown_msi_irqs(pdev); - return rc; } int mpic_u3msi_init(struct mpic *mpic) diff --git a/arch/powerpc/sysdev/mv64x60.h b/arch/powerpc/sysdev/mv64x60.h index 2ff0b4ef268..4f618fa465c 100644 --- a/arch/powerpc/sysdev/mv64x60.h +++ b/arch/powerpc/sysdev/mv64x60.h @@ -7,5 +7,6 @@ extern void __init mv64x60_init_irq(void); extern unsigned int mv64x60_get_irq(void); extern void __init mv64x60_pci_init(void); +extern void __init mv64x60_init_early(void); #endif /* __MV64X60_H__ */ diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c index 01d31628777..19e6ef26379 100644 --- a/arch/powerpc/sysdev/mv64x60_pic.c +++ b/arch/powerpc/sysdev/mv64x60_pic.c @@ -202,11 +202,6 @@ static struct irq_chip mv64x60_chip_gpp = { * mv64x60_host_ops functions */ -static int mv64x60_host_match(struct irq_host *h, struct device_node *np) -{ - return mv64x60_irq_host->host_data == np; -} - static struct irq_chip *mv64x60_chips[] = { [MV64x60_LEVEL1_LOW] = &mv64x60_chip_low, [MV64x60_LEVEL1_HIGH] = &mv64x60_chip_high, @@ -228,7 +223,6 @@ static int mv64x60_host_map(struct irq_host *h, unsigned int virq, } static struct irq_host_ops mv64x60_host_ops = { - .match = mv64x60_host_match, .map = mv64x60_host_map, }; @@ -253,14 +247,12 @@ void __init mv64x60_init_irq(void) np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic"); reg = of_get_property(np, "reg", &size); paddr = of_translate_address(np, reg); - of_node_put(np); mv64x60_irq_reg_base = ioremap(paddr, reg[1]); - mv64x60_irq_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, MV64x60_NUM_IRQS, + mv64x60_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, + MV64x60_NUM_IRQS, &mv64x60_host_ops, MV64x60_NUM_IRQS); - mv64x60_irq_host->host_data = np; - spin_lock_irqsave(&mv64x60_lock, flags); out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, mv64x60_cached_gpp_mask); diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c new file mode 100644 index 00000000000..367e7b13ec0 --- /dev/null +++ b/arch/powerpc/sysdev/mv64x60_udbg.c @@ -0,0 +1,152 @@ +/* + * udbg serial input/output routines for the Marvell MV64x60 (Discovery). + * + * Author: Dale Farnsworth <dale@farnsworth.org> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/udbg.h> + +#include <sysdev/mv64x60.h> + +#define MPSC_0_CR1_OFFSET 0x000c + +#define MPSC_0_CR2_OFFSET 0x0010 +#define MPSC_CHR_2_TCS (1 << 9) + +#define MPSC_0_CHR_10_OFFSET 0x0030 + +#define MPSC_INTR_CAUSE_OFF_0 0x0004 +#define MPSC_INTR_CAUSE_OFF_1 0x000c +#define MPSC_INTR_CAUSE_RCC (1<<6) + +static void __iomem *mpsc_base; +static void __iomem *mpsc_intr_cause; + +static void mv64x60_udbg_putc(char c) +{ + if (c == '\n') + mv64x60_udbg_putc('\r'); + + while(in_le32(mpsc_base + MPSC_0_CR2_OFFSET) & MPSC_CHR_2_TCS) + ; + out_le32(mpsc_base + MPSC_0_CR1_OFFSET, c); + out_le32(mpsc_base + MPSC_0_CR2_OFFSET, MPSC_CHR_2_TCS); +} + +static int mv64x60_udbg_testc(void) +{ + return (in_le32(mpsc_intr_cause) & MPSC_INTR_CAUSE_RCC) != 0; +} + +static int mv64x60_udbg_getc(void) +{ + int cause = 0; + int c; + + while (!mv64x60_udbg_testc()) + ; + + c = in_8(mpsc_base + MPSC_0_CHR_10_OFFSET + 2); + out_8(mpsc_base + MPSC_0_CHR_10_OFFSET + 2, c); + out_le32(mpsc_intr_cause, cause & ~MPSC_INTR_CAUSE_RCC); + return c; +} + +static int mv64x60_udbg_getc_poll(void) +{ + if (!mv64x60_udbg_testc()) + return -1; + + return mv64x60_udbg_getc(); +} + +static void mv64x60_udbg_init(void) +{ + struct device_node *np, *mpscintr, *stdout = NULL; + const char *path; + const phandle *ph; + struct resource r[2]; + const int *block_index; + int intr_cause_offset; + int err; + + path = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (!path) + return; + + stdout = of_find_node_by_path(path); + if (!stdout) + return; + + for (np = NULL; + (np = of_find_compatible_node(np, "serial", "marvell,mpsc")); ) + if (np == stdout) + break; + + of_node_put(stdout); + if (!np) + return; + + block_index = of_get_property(np, "block-index", NULL); + if (!block_index) + goto error; + + switch (*block_index) { + case 0: + intr_cause_offset = MPSC_INTR_CAUSE_OFF_0; + break; + case 1: + intr_cause_offset = MPSC_INTR_CAUSE_OFF_1; + break; + default: + goto error; + } + + err = of_address_to_resource(np, 0, &r[0]); + if (err) + goto error; + + ph = of_get_property(np, "mpscintr", NULL); + mpscintr = of_find_node_by_phandle(*ph); + if (!mpscintr) + goto error; + + err = of_address_to_resource(mpscintr, 0, &r[1]); + of_node_put(mpscintr); + if (err) + goto error; + + of_node_put(np); + + mpsc_base = ioremap(r[0].start, r[0].end - r[0].start + 1); + if (!mpsc_base) + return; + + mpsc_intr_cause = ioremap(r[1].start, r[1].end - r[1].start + 1); + if (!mpsc_intr_cause) { + iounmap(mpsc_base); + return; + } + mpsc_intr_cause += intr_cause_offset; + + udbg_putc = mv64x60_udbg_putc; + udbg_getc = mv64x60_udbg_getc; + udbg_getc_poll = mv64x60_udbg_getc_poll; + + return; + +error: + of_node_put(np); +} + +void mv64x60_init_early(void) +{ + mv64x60_udbg_init(); +} diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c index 2f91b55b775..20edd1e94ef 100644 --- a/arch/powerpc/sysdev/pmi.c +++ b/arch/powerpc/sysdev/pmi.c @@ -205,10 +205,12 @@ static int pmi_of_remove(struct of_device *dev) } static struct of_platform_driver pmi_of_platform_driver = { - .name = "pmi", .match_table = pmi_match, .probe = pmi_of_probe, - .remove = pmi_of_remove + .remove = pmi_of_remove, + .driver = { + .name = "pmi", + }, }; static int __init pmi_module_init(void) diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 90f87408b5d..3d57d3835b0 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -141,7 +141,7 @@ EXPORT_SYMBOL(qe_issue_cmd); * 16 BRGs, which can be connected to the QE channels or output * as clocks. The BRGs are in two different block of internal * memory mapped space. - * The baud rate clock is the system clock divided by something. + * The BRG clock is the QE clock divided by 2. * It was set up long ago during the initial boot phase and is * is given to us. * Baud rate clocks are zero-based in the driver code (as that maps @@ -165,28 +165,38 @@ unsigned int get_brg_clk(void) return brg_clk; } -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. +/* Program the BRG to the given sampling rate and multiplier + * + * @brg: the BRG, 1-16 + * @rate: the desired sampling rate + * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or + * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01, + * then 'multiplier' should be 8. + * + * Also note that the value programmed into the BRGC register must be even. */ -void qe_setbrg(u32 brg, u32 rate) +void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier) { - volatile u32 *bp; u32 divisor, tempval; - int div16 = 0; + u32 div16 = 0; - bp = &qe_immr->brg.brgc[brg]; + divisor = get_brg_clk() / (rate * multiplier); - divisor = (get_brg_clk() / rate); if (divisor > QE_BRGC_DIVISOR_MAX + 1) { - div16 = 1; + div16 = QE_BRGC_DIV16; divisor /= 16; } - tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE; - if (div16) - tempval |= QE_BRGC_DIV16; + /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says + that the BRG divisor must be even if you're not using divide-by-16 + mode. */ + if (!div16 && (divisor & 1)) + divisor++; + + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | + QE_BRGC_ENABLE | div16; - out_be32(bp, tempval); + out_be32(&qe_immr->brg.brgc[brg - 1], tempval); } /* Initialize SNUMs (thread serial numbers) according to diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 4d1dcb45963..e1c0fd6dbc1 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -245,10 +245,8 @@ static struct irq_chip qe_ic_irq_chip = { static int qe_ic_host_match(struct irq_host *h, struct device_node *node) { - struct qe_ic *qe_ic = h->host_data; - /* Exact match, unless qe_ic node is NULL */ - return qe_ic->of_node == NULL || qe_ic->of_node == node; + return h->of_node == NULL || h->of_node == node; } static int qe_ic_host_map(struct irq_host *h, unsigned int virq, @@ -323,25 +321,9 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic) return irq_linear_revmap(qe_ic->irqhost, irq); } -void qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); -} - -void qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); -} - -void __init qe_ic_init(struct device_node *node, unsigned int flags) +void __init qe_ic_init(struct device_node *node, unsigned int flags, + void (*low_handler)(unsigned int irq, struct irq_desc *desc), + void (*high_handler)(unsigned int irq, struct irq_desc *desc)) { struct qe_ic *qe_ic; struct resource res; @@ -352,9 +334,8 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags) return; memset(qe_ic, 0, sizeof(struct qe_ic)); - qe_ic->of_node = of_node_get(node); - qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + qe_ic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR, NR_QE_IC_INTS, &qe_ic_host_ops, 0); if (qe_ic->irqhost == NULL) { of_node_put(node); @@ -402,14 +383,13 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags) qe_ic_write(qe_ic->regs, QEIC_CICR, temp); set_irq_data(qe_ic->virq_low, qe_ic); - set_irq_chained_handler(qe_ic->virq_low, qe_ic_cascade_low); + set_irq_chained_handler(qe_ic->virq_low, low_handler); - if (qe_ic->virq_high != NO_IRQ) { + if (qe_ic->virq_high != NO_IRQ && + qe_ic->virq_high != qe_ic->virq_low) { set_irq_data(qe_ic->virq_high, qe_ic); - set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high); + set_irq_chained_handler(qe_ic->virq_high, high_handler); } - - printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs); } void qe_ic_set_highest_priority(unsigned int virq, int high) diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h index 9a631adb189..c1361d005a8 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.h +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.h @@ -84,9 +84,6 @@ struct qe_ic { /* The "linux" controller struct */ struct irq_chip hc_irq; - /* The device node of the interrupt controller */ - struct device_node *of_node; - /* VIRQ numbers of QE high/low irqs */ unsigned int virq_high; unsigned int virq_low; diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c index e32b45bf9ff..e53ea4d374a 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_io.c +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -36,6 +36,9 @@ struct port_regs { __be32 cpdir2; /* Direction register */ __be32 cppar1; /* Pin assignment register */ __be32 cppar2; /* Pin assignment register */ +#ifdef CONFIG_PPC_85xx + u8 pad[8]; +#endif }; static struct port_regs *par_io = NULL; @@ -195,29 +198,22 @@ EXPORT_SYMBOL(par_io_of_config); #ifdef DEBUG static void dump_par_io(void) { - int i; + unsigned int i; - printk(KERN_INFO "PAR IO registars:\n"); - printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io); + printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io); for (i = 0; i < num_par_io_ports; i++) { - printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cpodr, - in_be32(&par_io[i].cpodr)); - printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cpdata, - in_be32(&par_io[i].cpdata)); - printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cpdir1, - in_be32(&par_io[i].cpdir1)); - printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cpdir2, - in_be32(&par_io[i].cpdir2)); - printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cppar1, - in_be32(&par_io[i].cppar1)); - printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cppar2, - in_be32(&par_io[i].cppar2)); + printk(KERN_INFO " cpodr[%u]=%08x\n", i, + in_be32(&par_io[i].cpodr)); + printk(KERN_INFO " cpdata[%u]=%08x\n", i, + in_be32(&par_io[i].cpdata)); + printk(KERN_INFO " cpdir1[%u]=%08x\n", i, + in_be32(&par_io[i].cpdir1)); + printk(KERN_INFO " cpdir2[%u]=%08x\n", i, + in_be32(&par_io[i].cpdir2)); + printk(KERN_INFO " cppar1[%u]=%08x\n", i, + in_be32(&par_io[i].cppar1)); + printk(KERN_INFO " cppar2[%u]=%08x\n", i, + in_be32(&par_io[i].cppar2)); } } diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c index f970e5415ac..0e348d9af8a 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc.c +++ b/arch/powerpc/sysdev/qe_lib/ucc.c @@ -28,228 +28,188 @@ static DEFINE_SPINLOCK(ucc_lock); -int ucc_set_qe_mux_mii_mng(int ucc_num) +int ucc_set_qe_mux_mii_mng(unsigned int ucc_num) { unsigned long flags; + if (ucc_num > UCC_MAX_NUM - 1) + return -EINVAL; + spin_lock_irqsave(&ucc_lock, flags); - out_be32(&qe_immr->qmx.cmxgcr, - ((in_be32(&qe_immr->qmx.cmxgcr) & - ~QE_CMXGCR_MII_ENET_MNG) | - (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT))); + clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG, + ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT); spin_unlock_irqrestore(&ucc_lock, flags); return 0; } EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng); -int ucc_set_type(int ucc_num, struct ucc_common *regs, - enum ucc_speed_type speed) -{ - u8 guemr = 0; - - /* check if the UCC number is in range. */ - if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) - return -EINVAL; - - guemr = regs->guemr; - guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX); - switch (speed) { - case UCC_SPEED_TYPE_SLOW: - guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX); - break; - case UCC_SPEED_TYPE_FAST: - guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX); - break; - default: - return -EINVAL; - } - regs->guemr = guemr; - - return 0; -} - -int ucc_init_guemr(struct ucc_common *regs) +/* Configure the UCC to either Slow or Fast. + * + * A given UCC can be figured to support either "slow" devices (e.g. UART) + * or "fast" devices (e.g. Ethernet). + * + * 'ucc_num' is the UCC number, from 0 - 7. + * + * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit + * must always be set to 1. + */ +int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed) { - u8 guemr = 0; - - if (!regs) - return -EINVAL; - - /* Set bit 3 (which is reserved in the GUEMR register) to 1 */ - guemr = UCC_GUEMR_SET_RESERVED3; - - regs->guemr = guemr; - - return 0; -} + u8 __iomem *guemr; -static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num, - u8 * shift) -{ + /* The GUEMR register is at the same location for both slow and fast + devices, so we just use uccX.slow.guemr. */ switch (ucc_num) { - case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1); - *reg_num = 1; - *shift = 16; + case 0: guemr = &qe_immr->ucc1.slow.guemr; break; - case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1); - *reg_num = 1; - *shift = 0; + case 1: guemr = &qe_immr->ucc2.slow.guemr; break; - case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2); - *reg_num = 2; - *shift = 16; + case 2: guemr = &qe_immr->ucc3.slow.guemr; break; - case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2); - *reg_num = 2; - *shift = 0; + case 3: guemr = &qe_immr->ucc4.slow.guemr; break; - case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3); - *reg_num = 3; - *shift = 16; + case 4: guemr = &qe_immr->ucc5.slow.guemr; break; - case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3); - *reg_num = 3; - *shift = 0; + case 5: guemr = &qe_immr->ucc6.slow.guemr; break; - case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4); - *reg_num = 4; - *shift = 16; + case 6: guemr = &qe_immr->ucc7.slow.guemr; break; - case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4); - *reg_num = 4; - *shift = 0; + case 7: guemr = &qe_immr->ucc8.slow.guemr; break; default: - break; + return -EINVAL; } + + clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK, + UCC_GUEMR_SET_RESERVED3 | speed); + + return 0; +} + +static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr, + unsigned int *reg_num, unsigned int *shift) +{ + unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3); + + *reg_num = cmx + 1; + *cmxucr = &qe_immr->qmx.cmxucr[cmx]; + *shift = 16 - 8 * (ucc_num & 2); } -int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask) +int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask) { - volatile u32 *p_cmxucr; - u8 reg_num; - u8 shift; + __be32 *cmxucr; + unsigned int reg_num; + unsigned int shift; /* check if the UCC number is in range. */ - if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + if (ucc_num > UCC_MAX_NUM - 1) return -EINVAL; - get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift); if (set) - out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift)); + setbits32(cmxucr, mask << shift); else - out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift)); + clrbits32(cmxucr, mask << shift); return 0; } -int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode) +int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, + enum comm_dir mode) { - volatile u32 *p_cmxucr; - u8 reg_num; - u8 shift; - u32 clock_bits; - u32 clock_mask; - int source = -1; + __be32 *cmxucr; + unsigned int reg_num; + unsigned int shift; + u32 clock_bits = 0; /* check if the UCC number is in range. */ - if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + if (ucc_num > UCC_MAX_NUM - 1) return -EINVAL; - if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) { - printk(KERN_ERR - "ucc_set_qe_mux_rxtx: bad comm mode type passed."); + /* The communications direction must be RX or TX */ + if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) return -EINVAL; - } - get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift); switch (reg_num) { case 1: switch (clock) { - case QE_BRG1: source = 1; break; - case QE_BRG2: source = 2; break; - case QE_BRG7: source = 3; break; - case QE_BRG8: source = 4; break; - case QE_CLK9: source = 5; break; - case QE_CLK10: source = 6; break; - case QE_CLK11: source = 7; break; - case QE_CLK12: source = 8; break; - case QE_CLK15: source = 9; break; - case QE_CLK16: source = 10; break; - default: source = -1; break; + case QE_BRG1: clock_bits = 1; break; + case QE_BRG2: clock_bits = 2; break; + case QE_BRG7: clock_bits = 3; break; + case QE_BRG8: clock_bits = 4; break; + case QE_CLK9: clock_bits = 5; break; + case QE_CLK10: clock_bits = 6; break; + case QE_CLK11: clock_bits = 7; break; + case QE_CLK12: clock_bits = 8; break; + case QE_CLK15: clock_bits = 9; break; + case QE_CLK16: clock_bits = 10; break; + default: break; } break; case 2: switch (clock) { - case QE_BRG5: source = 1; break; - case QE_BRG6: source = 2; break; - case QE_BRG7: source = 3; break; - case QE_BRG8: source = 4; break; - case QE_CLK13: source = 5; break; - case QE_CLK14: source = 6; break; - case QE_CLK19: source = 7; break; - case QE_CLK20: source = 8; break; - case QE_CLK15: source = 9; break; - case QE_CLK16: source = 10; break; - default: source = -1; break; + case QE_BRG5: clock_bits = 1; break; + case QE_BRG6: clock_bits = 2; break; + case QE_BRG7: clock_bits = 3; break; + case QE_BRG8: clock_bits = 4; break; + case QE_CLK13: clock_bits = 5; break; + case QE_CLK14: clock_bits = 6; break; + case QE_CLK19: clock_bits = 7; break; + case QE_CLK20: clock_bits = 8; break; + case QE_CLK15: clock_bits = 9; break; + case QE_CLK16: clock_bits = 10; break; + default: break; } break; case 3: switch (clock) { - case QE_BRG9: source = 1; break; - case QE_BRG10: source = 2; break; - case QE_BRG15: source = 3; break; - case QE_BRG16: source = 4; break; - case QE_CLK3: source = 5; break; - case QE_CLK4: source = 6; break; - case QE_CLK17: source = 7; break; - case QE_CLK18: source = 8; break; - case QE_CLK7: source = 9; break; - case QE_CLK8: source = 10; break; - case QE_CLK16: source = 11; break; - default: source = -1; break; + case QE_BRG9: clock_bits = 1; break; + case QE_BRG10: clock_bits = 2; break; + case QE_BRG15: clock_bits = 3; break; + case QE_BRG16: clock_bits = 4; break; + case QE_CLK3: clock_bits = 5; break; + case QE_CLK4: clock_bits = 6; break; + case QE_CLK17: clock_bits = 7; break; + case QE_CLK18: clock_bits = 8; break; + case QE_CLK7: clock_bits = 9; break; + case QE_CLK8: clock_bits = 10; break; + case QE_CLK16: clock_bits = 11; break; + default: break; } break; case 4: switch (clock) { - case QE_BRG13: source = 1; break; - case QE_BRG14: source = 2; break; - case QE_BRG15: source = 3; break; - case QE_BRG16: source = 4; break; - case QE_CLK5: source = 5; break; - case QE_CLK6: source = 6; break; - case QE_CLK21: source = 7; break; - case QE_CLK22: source = 8; break; - case QE_CLK7: source = 9; break; - case QE_CLK8: source = 10; break; - case QE_CLK16: source = 11; break; - default: source = -1; break; + case QE_BRG13: clock_bits = 1; break; + case QE_BRG14: clock_bits = 2; break; + case QE_BRG15: clock_bits = 3; break; + case QE_BRG16: clock_bits = 4; break; + case QE_CLK5: clock_bits = 5; break; + case QE_CLK6: clock_bits = 6; break; + case QE_CLK21: clock_bits = 7; break; + case QE_CLK22: clock_bits = 8; break; + case QE_CLK7: clock_bits = 9; break; + case QE_CLK8: clock_bits = 10; break; + case QE_CLK16: clock_bits = 11; break; + default: break; } break; - default: - source = -1; - break; + default: break; } - if (source == -1) { - printk(KERN_ERR - "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC."); + /* Check for invalid combination of clock and UCC number */ + if (!clock_bits) return -ENOENT; - } - clock_bits = (u32) source; - clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK; - if (mode == COMM_DIR_RX) { - clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */ - clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */ - } - clock_bits <<= shift; - clock_mask <<= shift; + if (mode == COMM_DIR_RX) + shift += 4; - out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits); + clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift, + clock_bits << shift); return 0; } diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index 3df202e8d33..3223acbc39e 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -30,46 +30,45 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf) { - printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num); - printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs); - - printk(KERN_INFO "gumr : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); - printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); - printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); - printk(KERN_INFO "udsr : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); - printk(KERN_INFO "ucce : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); - printk(KERN_INFO "uccm : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); - printk(KERN_INFO "uccs : addr - 0x%08x, val - 0x%02x", - (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs); - printk(KERN_INFO "urfb : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); - printk(KERN_INFO "urfs : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); - printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); - printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->urfset, - in_be16(&uccf->uf_regs->urfset)); - printk(KERN_INFO "utfb : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); - printk(KERN_INFO "utfs : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); - printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); - printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); - printk(KERN_INFO "utpt : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); - printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); - printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x", - (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr); + printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num); + printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs); + + printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); + printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); + printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); + printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); + printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); + printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); + printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n", + &uccf->uf_regs->uccs, uccf->uf_regs->uccs); + printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); + printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); + printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); + printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset)); + printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); + printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); + printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); + printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); + printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); + printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); + printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n", + &uccf->uf_regs->guemr, uccf->uf_regs->guemr); } EXPORT_SYMBOL(ucc_fast_dump_regs); @@ -149,55 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* check if the UCC port number is in range. */ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { - printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__); + printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__); return -EINVAL; } /* Check that 'max_rx_buf_length' is properly aligned (4). */ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__); + printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", + __FUNCTION__); return -EINVAL; } /* Validate Virtual Fifo register values */ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { - printk(KERN_ERR "%s: urfs is too small", __FUNCTION__); + printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__); return -EINVAL; } if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__); return -EINVAL; } if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__); + printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__); return -EINVAL; } if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__); return -EINVAL; } if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__); return -EINVAL; } if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__); return -EINVAL; } if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__); return -EINVAL; } uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); if (!uccf) { - printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__); + printk(KERN_ERR "%s: Cannot allocate private data\n", + __FUNCTION__); return -ENOMEM; } @@ -206,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Set the PHY base address */ uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); if (uccf->uf_regs == NULL) { - printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__); + printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__); return -ENOMEM; } @@ -226,18 +227,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc uccf->rx_discarded = 0; #endif /* STATISTICS */ - /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) { - printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); - ucc_fast_free(uccf); - return ret; - } - /* Set UCC to fast type */ - if ((ret = ucc_set_type(uf_info->ucc_num, - (struct ucc_common *) (uf_regs), - UCC_SPEED_TYPE_FAST))) { - printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); + ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST); + if (ret) { + printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__); ucc_fast_free(uccf); return ret; } @@ -276,7 +269,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc uccf->ucc_fast_tx_virtual_fifo_base_offset = qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { - printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n", + __FUNCTION__); uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -288,7 +282,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { - printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n", + __FUNCTION__); uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -318,7 +313,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc if ((uf_info->rx_clock != QE_CLK_NONE) && ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, COMM_DIR_RX)) { - printk(KERN_ERR "%s: illegal value for RX clock", + printk(KERN_ERR "%s: illegal value for RX clock\n", __FUNCTION__); ucc_fast_free(uccf); return -EINVAL; @@ -327,7 +322,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc if ((uf_info->tx_clock != QE_CLK_NONE) && ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, COMM_DIR_TX)) { - printk(KERN_ERR "%s: illegal value for TX clock", + printk(KERN_ERR "%s: illegal value for TX clock\n", __FUNCTION__); ucc_fast_free(uccf); return -EINVAL; diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 1f65c26ce63..0174b3aeef8 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -115,11 +115,15 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) out_be32(&us_regs->gumr_l, gumr_l); } +/* Initialize the UCC for Slow operations + * + * The caller should initialize the following us_info + */ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) { struct ucc_slow_private *uccs; u32 i; - struct ucc_slow *us_regs; + struct ucc_slow __iomem *us_regs; u32 gumr; struct qe_bd *bd; u32 id; @@ -131,7 +135,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* check if the UCC port number is in range. */ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { - printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__); + printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__); return -EINVAL; } @@ -143,13 +147,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc */ if ((!us_info->rfw) && (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { - printk(KERN_ERR "max_rx_buf_length not aligned."); + printk(KERN_ERR "max_rx_buf_length not aligned.\n"); return -EINVAL; } uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); if (!uccs) { - printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__); + printk(KERN_ERR "%s: Cannot allocate private data\n", + __FUNCTION__); return -ENOMEM; } @@ -158,7 +163,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set the PHY base address */ uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); if (uccs->us_regs == NULL) { - printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__); + printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__); return -ENOMEM; } @@ -182,22 +187,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc return -ENOMEM; } id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); - qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED, + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol, uccs->us_pram_offset); uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); - /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) { - printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); - ucc_slow_free(uccs); - return ret; - } - /* Set UCC to slow type */ - if ((ret = ucc_set_type(us_info->ucc_num, - (struct ucc_common *) us_regs, - UCC_SPEED_TYPE_SLOW))) { + ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW); + if (ret) { printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); ucc_slow_free(uccs); return ret; @@ -212,7 +209,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_ERR_VALUE(uccs->rx_base_offset)) { - printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__, + us_info->rx_bd_ring_len); uccs->rx_base_offset = 0; ucc_slow_free(uccs); return -ENOMEM; @@ -292,12 +290,12 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* if the data is in cachable memory, the 'global' */ /* in the function code should be set. */ - uccs->us_pram->tfcr = uccs->us_pram->rfcr = - us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT; + uccs->us_pram->tbmr = UCC_BMR_BO_BE; + uccs->us_pram->rbmr = UCC_BMR_BO_BE; /* rbase, tbase are offsets from MURAM base */ - out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset); - out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset); + out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset); + out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset); /* Mux clocking */ /* Grant Support */ @@ -311,7 +309,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Rx clock routing */ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { - printk(KERN_ERR "%s: illegal value for RX clock", + printk(KERN_ERR "%s: illegal value for RX clock\n", __FUNCTION__); ucc_slow_free(uccs); return -EINVAL; @@ -319,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Tx clock routing */ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock, COMM_DIR_TX)) { - printk(KERN_ERR "%s: illegal value for TX clock", + printk(KERN_ERR "%s: illegal value for TX clock\n", __FUNCTION__); ucc_slow_free(uccs); return -EINVAL; @@ -343,8 +341,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc command = QE_INIT_TX; else command = QE_INIT_RX; /* We know at least one is TRUE */ - id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); - qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); + + qe_issue_cmd(command, id, us_info->protocol, 0); *uccs_ret = uccs; return 0; diff --git a/arch/powerpc/sysdev/timer.c b/arch/powerpc/sysdev/timer.c deleted file mode 100644 index e81e7ec2e79..00000000000 --- a/arch/powerpc/sysdev/timer.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Common code to keep time when machine suspends. - * - * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> - * - * GPLv2 - */ - -#include <linux/time.h> -#include <linux/sysdev.h> -#include <asm/rtc.h> - -static unsigned long suspend_rtc_time; - -/* - * Reset the time after a sleep. - */ -static int timer_resume(struct sys_device *dev) -{ - struct timeval tv; - struct timespec ts; - struct rtc_time cur_rtc_tm; - unsigned long cur_rtc_time, diff; - - /* get current RTC time and convert to seconds */ - get_rtc_time(&cur_rtc_tm); - cur_rtc_time = mktime(cur_rtc_tm.tm_year + 1900, - cur_rtc_tm.tm_mon + 1, - cur_rtc_tm.tm_mday, - cur_rtc_tm.tm_hour, - cur_rtc_tm.tm_min, - cur_rtc_tm.tm_sec); - - diff = cur_rtc_time - suspend_rtc_time; - - /* adjust time of day by seconds that elapsed while - * we were suspended */ - do_gettimeofday(&tv); - ts.tv_sec = tv.tv_sec + diff; - ts.tv_nsec = tv.tv_usec * NSEC_PER_USEC; - do_settimeofday(&ts); - - return 0; -} - -static int timer_suspend(struct sys_device *dev, pm_message_t state) -{ - struct rtc_time suspend_rtc_tm; - WARN_ON(!ppc_md.get_rtc_time); - - get_rtc_time(&suspend_rtc_tm); - suspend_rtc_time = mktime(suspend_rtc_tm.tm_year + 1900, - suspend_rtc_tm.tm_mon + 1, - suspend_rtc_tm.tm_mday, - suspend_rtc_tm.tm_hour, - suspend_rtc_tm.tm_min, - suspend_rtc_tm.tm_sec); - - return 0; -} - -static struct sysdev_class timer_sysclass = { - .resume = timer_resume, - .suspend = timer_suspend, - set_kset_name("timer"), -}; - -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int time_init_device(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(time_init_device); diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 90db8a720fe..31d3d33d91f 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -52,7 +52,6 @@ u32 tsi108_pci_cfg_base; static u32 tsi108_pci_cfg_phys; u32 tsi108_csr_vir_base; -static struct device_node *pci_irq_node; static struct irq_host *pci_irq_host; extern u32 get_vir_csrbase(void); @@ -193,8 +192,8 @@ void tsi108_clear_pci_cfg_error(void) } static struct pci_ops tsi108_direct_pci_ops = { - tsi108_direct_read_config, - tsi108_direct_write_config + .read = tsi108_direct_read_config, + .write = tsi108_direct_write_config, }; int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary) @@ -405,13 +404,7 @@ static int pci_irq_host_map(struct irq_host *h, unsigned int virq, return 0; } -static int pci_irq_host_match(struct irq_host *h, struct device_node *node) -{ - return pci_irq_node == node; -} - static struct irq_host_ops pci_irq_host_ops = { - .match = pci_irq_host_match, .map = pci_irq_host_map, .xlate = pci_irq_host_xlate, }; @@ -433,10 +426,11 @@ void __init tsi108_pci_int_init(struct device_node *node) { DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); - pci_irq_node = of_node_get(node); - pci_irq_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &pci_irq_host_ops, 0); + pci_irq_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LEGACY, + 0, &pci_irq_host_ops, 0); if (pci_irq_host == NULL) { printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n"); + of_node_put(node); return; } diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index 89059895a20..5149716c734 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -24,6 +24,7 @@ #include <linux/spinlock.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/kernel_stat.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/prom.h> @@ -55,9 +56,6 @@ struct uic { /* For secondary UICs, the cascade interrupt's irqaction */ struct irqaction cascade; - - /* The device node of the interrupt controller */ - struct device_node *of_node; }; static void uic_unmask_irq(unsigned int virq) @@ -142,7 +140,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type) desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; - if (trigger) + if (!trigger) desc->status |= IRQ_LEVEL; spin_unlock_irqrestore(&uic->lock, flags); @@ -159,10 +157,62 @@ static struct irq_chip uic_irq_chip = { .set_type = uic_set_irq_type, }; -static int uic_host_match(struct irq_host *h, struct device_node *node) +/** + * handle_uic_irq - irq flow handler for UIC + * @irq: the interrupt number + * @desc: the interrupt description structure for this irq + * + * This is modified version of the generic handle_level_irq() suitable + * for the UIC. On the UIC, acking (i.e. clearing the SR bit) a level + * irq will have no effect if the interrupt is still asserted by the + * device, even if the interrupt is already masked. Therefore, unlike + * the standard handle_level_irq(), we must ack the interrupt *after* + * invoking the ISR (which should have de-asserted the interrupt in + * the external source). For edge interrupts we ack at the beginning + * instead of the end, to keep the window in which we can miss an + * interrupt as small as possible. + */ +void fastcall handle_uic_irq(unsigned int irq, struct irq_desc *desc) { - struct uic *uic = h->host_data; - return uic->of_node == node; + unsigned int cpu = smp_processor_id(); + struct irqaction *action; + irqreturn_t action_ret; + + spin_lock(&desc->lock); + if (desc->status & IRQ_LEVEL) + desc->chip->mask(irq); + else + desc->chip->mask_ack(irq); + + if (unlikely(desc->status & IRQ_INPROGRESS)) + goto out_unlock; + desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); + kstat_cpu(cpu).irqs[irq]++; + + /* + * If its disabled or no action available + * keep it masked and get out of here + */ + action = desc->action; + if (unlikely(!action || (desc->status & IRQ_DISABLED))) { + desc->status |= IRQ_PENDING; + goto out_unlock; + } + + desc->status |= IRQ_INPROGRESS; + desc->status &= ~IRQ_PENDING; + spin_unlock(&desc->lock); + + action_ret = handle_IRQ_event(irq, action); + + spin_lock(&desc->lock); + desc->status &= ~IRQ_INPROGRESS; + if (desc->status & IRQ_LEVEL) + desc->chip->ack(irq); + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) + desc->chip->unmask(irq); +out_unlock: + spin_unlock(&desc->lock); } static int uic_host_map(struct irq_host *h, unsigned int virq, @@ -173,7 +223,7 @@ static int uic_host_map(struct irq_host *h, unsigned int virq, set_irq_chip_data(virq, uic); /* Despite the name, handle_level_irq() works for both level * and edge irqs on UIC. FIXME: check this is correct */ - set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq); + set_irq_chip_and_handler(virq, &uic_irq_chip, handle_uic_irq); /* Set default irq type */ set_irq_type(virq, IRQ_TYPE_NONE); @@ -194,7 +244,6 @@ static int uic_host_xlate(struct irq_host *h, struct device_node *ct, } static struct irq_host_ops uic_host_ops = { - .match = uic_host_match, .map = uic_host_map, .xlate = uic_host_xlate, }; @@ -207,6 +256,9 @@ irqreturn_t uic_cascade(int virq, void *data) int subvirq; msr = mfdcr(uic->dcrbase + UIC_MSR); + if (!msr) /* spurious interrupt */ + return IRQ_HANDLED; + src = 32 - ffs(msr); subvirq = irq_linear_revmap(uic->irqhost, src); @@ -229,7 +281,6 @@ static struct uic * __init uic_init_one(struct device_node *node) memset(uic, 0, sizeof(*uic)); spin_lock_init(&uic->lock); - uic->of_node = of_node_get(node); indexp = of_get_property(node, "cell-index", &len); if (!indexp || (len != sizeof(u32))) { printk(KERN_ERR "uic: Device node %s has missing or invalid " @@ -246,8 +297,8 @@ static struct uic * __init uic_init_one(struct device_node *node) } uic->dcrbase = *dcrreg; - uic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_UIC_INTS, - &uic_host_ops, -1); + uic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR, + NR_UIC_INTS, &uic_host_ops, -1); if (! uic->irqhost) { of_node_put(node); return NULL; /* FIXME: panic? */ diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c new file mode 100644 index 00000000000..c2f17cc43df --- /dev/null +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -0,0 +1,151 @@ +/* + * Interrupt controller driver for Xilinx Virtex FPGAs + * + * Copyright (C) 2007 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +/* + * This is a driver for the interrupt controller typically found in + * Xilinx Virtex FPGA designs. + * + * The interrupt sense levels are hard coded into the FPGA design with + * typically a 1:1 relationship between irq lines and devices (no shared + * irq lines). Therefore, this driver does not attempt to handle edge + * and level interrupts differently. + */ +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/irq.h> + +/* + * INTC Registers + */ +#define XINTC_ISR 0 /* Interrupt Status */ +#define XINTC_IPR 4 /* Interrupt Pending */ +#define XINTC_IER 8 /* Interrupt Enable */ +#define XINTC_IAR 12 /* Interrupt Acknowledge */ +#define XINTC_SIE 16 /* Set Interrupt Enable bits */ +#define XINTC_CIE 20 /* Clear Interrupt Enable bits */ +#define XINTC_IVR 24 /* Interrupt Vector */ +#define XINTC_MER 28 /* Master Enable */ + +static struct irq_host *master_irqhost; + +/* + * IRQ Chip operations + */ +static void xilinx_intc_mask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void * regs = get_irq_chip_data(virq); + pr_debug("mask: %d\n", irq); + out_be32(regs + XINTC_CIE, 1 << irq); +} + +static void xilinx_intc_unmask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void * regs = get_irq_chip_data(virq); + pr_debug("unmask: %d\n", irq); + out_be32(regs + XINTC_SIE, 1 << irq); +} + +static void xilinx_intc_ack(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void * regs = get_irq_chip_data(virq); + pr_debug("ack: %d\n", irq); + out_be32(regs + XINTC_IAR, 1 << irq); +} + +static struct irq_chip xilinx_intc_irqchip = { + .typename = "Xilinx INTC", + .mask = xilinx_intc_mask, + .unmask = xilinx_intc_unmask, + .ack = xilinx_intc_ack, +}; + +/* + * IRQ Host operations + */ +static int xilinx_intc_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t irq) +{ + set_irq_chip_data(virq, h->host_data); + set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq); + set_irq_type(virq, IRQ_TYPE_NONE); + return 0; +} + +static struct irq_host_ops xilinx_intc_ops = { + .map = xilinx_intc_map, +}; + +struct irq_host * __init +xilinx_intc_init(struct device_node *np) +{ + struct irq_host * irq; + struct resource res; + void * regs; + int rc; + + /* Find and map the intc registers */ + rc = of_address_to_resource(np, 0, &res); + if (rc) { + printk(KERN_ERR __FILE__ ": of_address_to_resource() failed\n"); + return NULL; + } + regs = ioremap(res.start, 32); + + printk(KERN_INFO "Xilinx intc at 0x%08X mapped to 0x%p\n", + res.start, regs); + + /* Setup interrupt controller */ + out_be32(regs + XINTC_IER, 0); /* disable all irqs */ + out_be32(regs + XINTC_IAR, ~(u32) 0); /* Acknowledge pending irqs */ + out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */ + + /* Allocate and initialize an irq_host structure. */ + irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1); + if (!irq) + panic(__FILE__ ": Cannot allocate IRQ host\n"); + irq->host_data = regs; + return irq; +} + +int xilinx_intc_get_irq(void) +{ + void * regs = master_irqhost->host_data; + pr_debug("get_irq:\n"); + return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR)); +} + +void __init xilinx_intc_init_tree(void) +{ + struct device_node *np; + + /* find top level interrupt controller */ + for_each_compatible_node(np, NULL, "xilinx,intc") { + if (!of_get_property(np, "interrupts", NULL)) + break; + } + + /* xilinx interrupt controller needs to be top level */ + BUG_ON(!np); + + master_irqhost = xilinx_intc_init(np); + BUG_ON(!master_irqhost); + + irq_set_default_host(master_irqhost); + of_node_put(np); +} |